Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 126
Encontrada(s) 2 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

Modulation of hippocampal NCAM polysialylation and spatial memory consolidation by fear conditioning

  • Merino Martín, José Joaquín
  • Sandi, Carmen
  • Cordero, M Isabel
  • Kruyt, Nyika D
  • Murphy, Keith J
  • Regan, Ciaran M
Background: Cell adhesion molecule function is involved in hippocampal synaptic plasticity and associated with memory consolidation. At the infragranular zone of the dentate gyrus, neurons expressing the polysialylated form of the neural cell adhesion molecule (NCAM PSA) transiently increase their frequency 12 hours after training in different tasks. Methods: Using immunohistochemical procedures, we investigated NCAM polysialylation following training in a contextual fear conditioning paradigm that employed increasing shock intensities to separately model stressful and traumatic experiences in adult male Wistar rats. Results: Fear conditioning with a stressful.4-mA stimulus resulted in an increased frequency of dentate polysialylated neurons, the magnitude of which was indistinguishable from that observed following water maze training. By contrast, training with a traumatic 1-mA stimulus resulted in a significant decrease in the frequency of polysialylated neurons at the 12 hours posttraining time. Whereas sequential training in the water maze paradigm followed by fear conditioning resulted in potentiated consolidation of spatial information when conditioning involved a.4-mA stimulus, amnesia for spatial learning occurred when conditioning was performed with a 1-mA stimulus. Conclusions: These results suggest traumatic fear conditioning suppresses NCAM-PSA-mediated plasticity and the concomitant inability to store the trace of recently acquired information.
Dipòsit Digital de Documents de la UAB
Publication

What happens while

  • Nia, Núria
Curt de ficció creat per al projecte VIW (pagines.uab.cat/viw), que investiga l'audiodescripció. Doblat al català i al castellà per l'ECAD, Short fiction film created for the Visuals Into Words (VIW) project (pagines.uab.cat/viw), which researches audio description. Dubbed into Catalan and Spanish by ECAD
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Abiotic stress tolerance and root nodule-associated bacteria in Lablab purpureus

  • Sapiña-Solano, Adrian
  • Pallotti Sagripanti, Claudia Gabriela|||0000-0002-5231-4285
  • Boscaiu, Monica|||0000-0002-9691-4223
  • Fita, Ana|||0000-0002-8637-5852
  • Vicente, Oscar|||0000-0001-5076-3784
  • Ruiz-González, Mario X.|||0000-0003-3654-773X
  • Yago, Alberto
  • Acosta-Quezada, Pablo G.
[EN] Climate change effects pose significant challenges to 21st-century society. Abiotic stresses such as salinity and drought represent a major risk to biodiversity and threaten crops, leading to economic losses and food security concerns. Promoting sustainable agriculture is both a solution and a necessity to address these challenges, requiring the assessment of stress-tolerant crops and the identification of beneficial microorganisms to enhance resilience, soil health, and productivity while reducing agrochemical reliance. In this study, we assessed the tolerance of Lablab purpureus, an underutilised non-European legume with high nutraceutical potential, to saline and water stress. Nodule-associated bacteria were isolated from two Mediterranean ecosystems, and three salt- tolerant strains (CJND1, LN1RA and LN3BA) were selected to evaluate their interaction with the alien crop, L. purpureus, and their effects on plant abiotic stress tolerance and traits. We analysed phenological, biomass, and root traits, photosynthetic pigments, osmolytes, ion contents (Na+, Cl , K+, Ca2+), oxidative stress markers, antioxidant compounds, and antioxidant enzyme activities. The bacteria produced heterogeneous effects. CJND1 and LN3BA promoted root length, whereas LN3BA also increased root surface area. LN1RA increased the Cha/ Chb ratio and enhanced nodulation under water stress. Overall, nodule-associated bacteria positively influenced root traits. Salinity reduced biomass, increased proline levels, and led to Na+and Ca2+accumulation in roots while blocking Na+ translocation to aerial parts, whereas water stress activated glutathione reductase. . Our results suggest that L. purpureus is a promising crop for mild salt stress in the Mediterranean and reveal the heterogeneity of the plant and root nodule bacteria interactions, highlighting their agronomic potential., This study was supported by a María Zambrano distinguished researcher contract to MXR-G and funded by the Ministry of Universities (Government of Spain) and the NextGenerationEU. AS-S was supported by the Programa Investigo , Plan de Recuperacion, Transformacion y Resiliencia , funded by the European Union, Next generation EU . Financiado con Ayuda a Primeros Proyectos de Investigacion (PAID-06-22), Vicerrectorado de Investigacion de la Universitat Politecninca de Valencia . This study was financed by the AGROALNEXT/2022/027 grant from Conselleria d Innovacio, ¿ Universitats, Ci`encia i Societat Digital (Generalitat Valenciana, Spain) and MCIN, NextGenerationEU (PRTR-C17.I1) Funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Machine Learning for Glaucoma Assessment using Fundus Images

  • Díaz Pinto, Andrés Yesid
[ES] Las imágenes de fondo de ojo son muy utilizadas por los oftalmólogos para la evaluación de la retina y la detección de glaucoma. Esta patología es la segunda causa de ceguera en el mundo, según estudios de la Organización Mundial de la Salud (OMS). En esta tesis doctoral, se estudian algoritmos de aprendizaje automático (machine learning) para la evaluación automática del glaucoma usando imágenes de fondo de ojo. En primer lugar, se proponen dos métodos para la segmentación automática. El primer método utiliza la transformación Watershed Estocástica para segmentar la copa óptica y posteriormente medir características clínicas como la relación Copa/Disco y la regla ISNT. El segundo método es una arquitectura U-Net que se usa específicamente para la segmentación del disco óptico y la copa óptica. A continuación, se presentan sistemas automáticos de evaluación del glaucoma basados en redes neuronales convolucionales (CNN por sus siglas en inglés). En este enfoque se utilizan diferentes modelos entrenados en ImageNet como clasificadores automáticos de glaucoma, usando fine-tuning. Esta nueva técnica permite detectar el glaucoma sin segmentación previa o extracción de características. Además, este enfoque presenta una mejora considerable del rendimiento comparado con otros trabajos del estado del arte. En tercer lugar, dada la dificultad de obtener grandes cantidades de imágenes etiquetadas (glaucoma/no glaucoma), esta tesis también aborda el problema de la síntesis de imágenes de la retina. En concreto se analizaron dos arquitecturas diferentes para la síntesis de imágenes, las arquitecturas Variational Autoencoder (VAE) y la Generative Adversarial Networks (GAN). Con estas arquitecturas se generaron imágenes sintéticas que se analizaron cualitativa y cuantitativamente, obteniendo un rendimiento similar a otros trabajos en la literatura. Finalmente, en esta tesis se plantea la utilización de un tipo de GAN (DCGAN) como alternativa a los sistemas automáticos de evaluación del glaucoma presentados anteriormente. Para alcanzar este objetivo se implementó un algoritmo de aprendizaje semi-supervisado., [CA] Les imatges de fons d'ull són molt utilitzades pels oftalmòlegs per a l'avaluació de la retina i la detecció de glaucoma. Aquesta patologia és la segona causa de ceguesa al món, segons estudis de l'Organització Mundial de la Salut (OMS). En aquesta tesi doctoral, s'estudien algoritmes d'aprenentatge automàtic (machine learning) per a l'avaluació automàtica del glaucoma usant imatges de fons d'ull. En primer lloc, es proposen dos mètodes per a la segmentació automàtica. El primer mètode utilitza la transformació Watershed Estocàstica per segmentar la copa òptica i després mesurar característiques clíniques com la relació Copa / Disc i la regla ISNT. El segon mètode és una arquitectura U-Net que s'usa específicament per a la segmentació del disc òptic i la copa òptica. A continuació, es presenten sistemes automàtics d'avaluació del glaucoma basats en xarxes neuronals convolucionals (CNN per les sigles en anglès). En aquest enfocament s'utilitzen diferents models entrenats en ImageNet com classificadors automàtics de glaucoma, usant fine-tuning. Aquesta nova tècnica permet detectar el glaucoma sense segmentació prèvia o extracció de característiques. A més, aquest enfocament presenta una millora considerable del rendiment comparat amb altres treballs de l'estat de l'art. En tercer lloc, donada la dificultat d'obtenir grans quantitats d'imatges etiquetades (glaucoma / no glaucoma), aquesta tesi també aborda el problema de la síntesi d'imatges de la retina. En concret es van analitzar dues arquitectures diferents per a la síntesi d'imatges, les arquitectures Variational Autoencoder (VAE) i la Generative adversarial Networks (GAN). Amb aquestes arquitectures es van generar imatges sintètiques que es van analitzar qualitativament i quantitativament, obtenint un rendiment similar a altres treballs a la literatura. Finalment, en aquesta tesi es planteja la utilització d'un tipus de GAN (DCGAN) com a alternativa als sistemes automàtics d'avaluació del glaucoma presentats anteriorment. Per assolir aquest objectiu es va implementar un algoritme d'aprenentatge semi-supervisat., [EN] Fundus images are widely used by ophthalmologists to assess the retina and detect glaucoma, which is, according to studies from the World Health Organization (WHO), the second cause of blindness worldwide. In this thesis, machine learning algorithms for automatic glaucoma assessment using fundus images are studied. First, two methods for automatic segmentation are proposed. The first method uses the Stochastic Watershed transformation to segment the optic cup and measures clinical features such as the Cup/Disc ratio and ISNT rule. The second method is a U-Net architecture focused on the optic disc and optic cup segmentation task. Secondly, automated glaucoma assessment systems using convolutional neural networks (CNNs) are presented. In this approach, different ImageNet-trained models are fine-tuned and used as automatic glaucoma classifiers. These new techniques allow detecting glaucoma without previous segmentation or feature extraction. Moreover, it improves the performance of other state-of-art works. Thirdly, given the difficulty of getting large amounts of glaucoma-labelled images, this thesis addresses the problem of retinal image synthesis. Two different architectures for image synthesis, the Variational Autoencoder (VAE) and Generative Adversarial Networks (GAN) architectures, were analysed. Using these models, synthetic images that were qualitative and quantitative analysed, reporting state-of-the-art performance, were generated. Finally, an adversarial model is used to create an alternative automatic glaucoma assessment system. In this part, a semi-supervised learning algorithm was implemented to reach this goal., The research derived from this doctoral thesis has been supported by the Generalitat Valenciana under the scholarship Santiago Grisolía [GRISOLIA/2015/027].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Real-time adaptive algorithms using a Graphics Processing Units

  • Lorente Giner, Jorge
  • Belloch Rodríguez, José Antonio
  • Piñero, Gema
  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • de Diego Antón, María|||0000-0001-9948-3396
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • Vidal Maciá, Antonio Manuel
[EN] Graphics Processing Units (GPUs) have been recently used as coprocessors capable of performing tasks that are not necessarily related to graphics processing in order to optimize computing resources. The use of GPUs has being extended to a wide variety of intensive-computation applications among which audio processing is included. However data transactions between the CPU and the GPU and vice versa have questioned the viability of GPUs for applications in which direct and real-time interaction between microphone and loudspeaker is required. One of the audio applications that requires real-time feedback is adaptive channel identification. Particularly, when the partitioned Least Mean Squares (LMS) algorithm is used in the frequency domain, the size of input-data buffers and filters and how they can be managed in order to successfully exploit the GPU resources is an important key in the design process. This paper discusses the design and implementation of all the processing blocks of an adaptive channel identification system on a GPU, proposing a GPU implementation that can be easily adapted to any acoustic scenario, while freeing up CPU resources for other tasks., This work has been financially supported by the Spanish Ministerio de Ciencia e Innovación TEC2009-13741, Universitat Politècnica de València through “Programa de Apoyo a la Investigación y Desarrollo (PAID-05-11)” and Generalitat Valenciana through project PROMETEO/2009/013 and GV/2010/027
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

BOPHY Dyes Bearing Arylsulfenyl Moieties as Highly Efficient Triplet Photosensitizers

  • Bellaizac-Riascos, Angie Julieth
  • Jiménez, M Consuelo|||0000-0002-8057-4316
  • Pérez-Ruiz, Raúl|||0000-0003-1136-3598
  • Cortés-Villena, Alejandro
  • Galian, Raquel E.
  • Pérez-Prieto, Julia
[EN] Encouraged by the successful application of BOPHY dyes in a wide range of scientific fields, from energy to biology, the design of novel compounds based on this type of scaffold appears to be warranted. Herein, we have synthesized a family of symmetric BOPHY dyes bearing arylsulfenyl groups at the 2- and 7-position of the main core, which were fully characterized. The molecular structures were confirmed by the X-ray diffraction (XRD) technique. The photophysical properties were investigated in detail, including spectroscopic measurements and laser flash photolysis experiments. Both the singlet and the triplet excited states of the novel BOPHY dyes were characterized in different solvents. Considering their intersystem crossing quantum yields, these dyes were found to be suitable triplet photosensitizers in bimolecular systems for photon upconversion based on triplet-triplet annihilation. Furthermore, not only direct but also indirect experiments revealed that they effectively acted as photosensitizers for singlet oxygen generation, making them potential candidates for biological applications., Financial support from the Spanish Government (projects PID2023-148367OB-I00 and PID2022-1381890NB-I00 funded by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe") and Generalitat Valenciana (projects IDIFEDER/2018/064, IDIFEDER/2021/064, and CIPROM/2022/57) is gratefully acknowledged. Julieth Bellaizac-Riascos thanks Generalitat Valenciana for a Grisolia contract (CIGRIS/2022/027).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Estudio y análisis del moldeo por inyección de materiales poliméricos termoplásticos, Study and analysis of injection molding of thermoplastic polymeric materials

  • Juárez Varón, David|||0000-0003-3251-8851
  • Balart, Rafael|||0000-0001-5670-7126
  • Peydro, M. A.|||0000-0002-8503-1505
  • Ferrándiz Bou, Santiago|||0000-0001-7137-9298
[EN] This article aims at analyzing the injection molding of thermoplastic polymeric materials by examining their current situation from the perspective of industrial production, the evolution of technology and modeling of the injection process., [ES] El presente artículo tiene como objetivo el análisis del moldeo por inyección de materiales poliméricos termoplásticos, estudiando su situación actual desde la perspectiva de la producción industrial, la evolución de la técnica y la modelización del proceso de inyección., Authors thank “Ministerio de Ciencia y Tecnología”, Ref: DPI2007-66849-C02-02 and Generalitat Valenciana FPA/2010/027 for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Environmental monitoring of a climate change indicator (Vibrio vulnificus) in coastal wetland water samples based on field-deployable detection

  • Quintero-Campos, Pedro|||0000-0002-9398-5077
  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
  • Maquieira, Angel|||0000-0003-4641-4957
  • Salvador-Clavell, Rubén
  • Martín-Urdiales, Blanca
  • Fouz, Belén
  • Amaro, Carmen
[EN] Global warming is driving rapid changes across all ecological scales, including shifts in the distribution patterns and virulence potential of some pathogenic bacteria. A relevant pathogen affected by climate change is Vibrio vulnificus, a species considered a valuable biomarker because rising temperatures and changes in salinity strongly influence its prevalence and distribution. Comprehensive surveillance at local scales is required to provide precise environmental understanding. However, current monitoring methods are often inaccessible or cost-prohibitive, highlighting the need for fast, field-deployable alternatives. This study hypothesized that combining lateral flow assay with isothermal DNA amplification can enable rapid, on-site detection with minimal instrumentation. To validate the approach, V. vulnificus was monitored in a Mediterranean coastal wetland, a sensitive ecosystem where changes impact biodiversity and may lead to waterborne diseases. The campaign was based on water sampling, an enrichment step, and a DNA-based assay integrated into a microfluidic chip. Species-specific vvhA gene was amplified through recombinase polymerase amplification (RPA), detected on a lateral flow strip, and quantified by a smartphone. The monitoring campaign identified locations within the wetland exhibiting a significant increase in bacterial concentrations, up to 300 times, depending on the sampling site. The bacterium was detected in brackish water areas and inflow/outflow points, showing excellent performance. These promising results suggest that the new procedure can help detect microenvironments that favor or inhibit bacterial growth. The surveillance strategy could be effectively applied on a global scale to assess risks, examine variations associated with climate change, and implement measures against Vibrio infections., This study forms part of the ThinkInAzul programme and was supported by MICIU with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana projects GVATHINKINAZUL/2021/010-UPV [PI: A. Maquieira, L.A. Tortajada, UPV] and GVA-THINKINAZUL/2021/027 [PI: C. Amaro, B. Fouz, UV]. Financial support was also received from projects PID2022-140653OBI00 funded by MCIN/AEI and CIAICO/2021/293 funded by Conselleria de Innovacion, ¿ Universidades, Ciencia y Sociedad Digital (GVA). Additional support was obtained through the INVESTIGO Program funded by the European Union NextGenerationEU and GVA
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A comparative analysis of the volatile profiles in the pulp of red-fleshed and standard orange varieties during fruit maturation

  • Zacarías-García, Jaime
  • Zacarias, Lorenzo
  • Rodrigo, Maria Jesus
  • Rambla Nebot, Jose Luis
  • GRANELL RICHART, ANTONIO|||0000-0003-4266-9581
[EN] Kirkwood Navel and Ruby Valencia red-fleshed sweet oranges accumulate high concentrations of the carotenes phytoene, phytofluene and lycopene in the pulp. In order to gain insight into the parameters that influence fruit quality in these varieties, a comparative analysis of volatile organic compounds (VOCs) in the pulp of Kirkwood Navel and Ruby Valencia red-fleshed sweet oranges and their standard blond counterparts, Navel and Valencia, was performed during fruit development and ripening. A total of 95 VOCs were identified by HS-SPME/GC-MS during the ripening process. The observed differences in VOCs between red-fleshed and blond oranges were more closely related to the fruit ripening stage than to the genotype. However, two distinctive common features were identified in both red-fleshed oranges compared to their respective standard varieties. These were lower levels of sesquiterpenes and higher levels of the norisoprenoids 6-methyl-5-hepten-2-one and geranylacetone. These findings indicate that altered carotenoid metabolism in red-fleshed oranges not only affects flesh pigmentation but also leads to changes in specific VOCs that may influence flavor perception., This work was supported by the research grant RTI2018-095131-B-I00 funded by MCIN/AEI/10.13039/501100011033 (Spanish Government) , "ERDF A way of making Europe" (European Union) and PROMETEO/2020/027 (Generalitat Valenciana, Spain) . This study was also supported by the predoctoral scholarship FDEGENT/2018/007 from Generalitat Valenciana (Spain) and grant 202370E064 (CSIC) . JLR acknowledges funding from the Spanish Ministry of Science and Innovation by a Juan de la Cierva-incorporacion grant (IJC2020-045612-I) . Authors are member/s of the Spanish Carotenoid Network (CaRed) , grant RED2022-134577-T, funded by MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Study, mechanical characterization and mathematical modeling of compatible SEBS blends for industrial applications in orthopedics and childcare

  • Juárez Varón, David|||0000-0003-3251-8851
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Ferrándiz Bou, Santiago|||0000-0001-7137-9298
  • Peydro, M. A.|||0000-0002-8503-1505
  • Balart, Rafael|||0000-0001-5670-7126
In this work, a system of compatible blends based on two commercial grades of a thermoplastic elastomer, styrene-ethylene/ butylene-styrene (SEBS), with extreme Shore A hardness values (5 and 90), was studied in order to obtain a range of different performance blends for orthopedic and childcare applications, where usually liquid silicone rubber is used. Mechanical properties of different blends were obtained, and Equivalent Box Model (EBM) was used for the prediction of the mechanical behavior. The results show good agreement between the theoretical model and experimental data of new blends of SEBS., The authors thank "Ministerio de Ciencia y Tecnologia", Ref: DPI2007-66849-C02-02 and Generalitat Valenciana FPA/2010/027 for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Involvement of ethylene in color changes and carotenoid biosynthesis in loquat fruit (Eriobotrya japonica Lindl. cv. Algerie)

  • Alós, Enriqueta
  • Zacarias, L.
  • Rodrigo-Esteve, Mª Jesús
  • Martinez Fuentes, Amparo|||0000-0002-8594-4953
  • Reig Valor, Carmina|||0000-0002-1911-6834
  • Mesejo Conejos, Carlos|||0000-0002-6984-0775
  • Agustí Fonfría, Manuel|||0000-0002-4271-6299
[EN] In loquat (Eriobotrya japonica Lindl cv. Algerie) fruit, despite the non-climacteric ripening behaviour, evidence suggest that ethylene may participate in the regulation of several ripening- and postharvest-related processes. Color changes and carotenoid profile were analyzed in fruit at three developmental stages (breaker, yellow and colored fruits). At early stages, the fruit peel contained phytoene, phytofluene and other typical chloroplastic carotenoids that decreased during ripening, to accumulate ß-carotene, violaxanthin and ß-cryptoxanthin in mature fruits. In the pulp, carotenoid concentration increased during ripening to become predominant phytoene, followed by ß-carotene and ß-cryptoxanthin. Expression of the carotenoid biosynthetic genes (PSY, PDS, ZDS, CYCB and BCH) was downregulated in the peel during maturation, but increased in the pulp with the exception of BCH. The involvement of ethylene in the regulation of pigmentation was further evaluated by treating fruits at the three ripening stages with ethylene or its action inhibitor 1-MCP. At breaker fruit, ethylene accelerated and 1-MCP delayed fruit coloration, but the effect was progressively lost as fruit matured. Ethylene and 1-MCP produced different changes in carotenoids content and gene expression in peel and pulp. Application of ethylene enhanced ß-carotene content in both tissues whereas ß-cryptoxanthin was only stimulated in the pulp. 1-MCP suppressed these changes in carotenoid composition in the pulp but had little effect in the peel. A differential transcriptional level the pulp was more responsive to downregulated gene expression than the peel. Collectively, results indicate that: 1) ethylene is involved in the regulation of pigmentation and carotenoid biosynthesis in loquat fruits, 2) a differential regulation of carotenoid biosynthesis and response to ethylene appear to operate in the peel and the pulp, and 3) ß-carotene hydroxylase (BCH) is a key step in the regulation of carotenoid content and composition in both tissues of loquat fruit., Dr. E. Alos was recipient a post-doctoral contract JAE-Doc-CSIC (Fondo Social Europeo). The financial support of the research grants FP7-PEOPLE-2011-CIG-2011-303652 (Marie Curie Actions, European Union), AGL-2015-70218 (Ministerio Economia y Competitividad, Spain), GV/2012/036 (GeneralitatValenciana, Spain) and PROMETEO-II 2014/27 (Generalitat Valenciana) are gratefully acknowledged. MJR and LZ are members of Eurocaroten (COST_Action CA15136) and CaRed (Spanish Carotenoid Network, BIO2015-71703-REDT and BIO2017-90877-REDT).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Alteration of the Mitochondrial Effects of Ceria Nanoparticles by Gold: An Approach for the Mitochondrial Modulation of Cells Based on Nanomedicine

  • Gutiérrez-Carcedo, Patricia
  • Simó, Rafael
  • Setoain, Xavier
  • Aparicio-Gómez, Carolina
  • Abasolo, Ibane
  • Victor, Victor Manuel
  • Herance, José Raúl
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Ceria nanoparticles are cell compatible antioxidants whose activity can be enhanced by gold deposition and by surface functionalization with positive triphenylphosphonium units to selectively target the mitochondria. The antioxidant properties of these nanoparticles can serve as the basis of a new strategy for the treatment of several disorders exhibiting oxidative stress, such as cancer, diabetes or Alzheimer's disease. However, all of these pathologies require a specific antioxidant according with their mechanism to remove oxidant species excess in cells and diminish their effect on mitochondrial function. The mechanism through which ceria nanoparticles neutralize oxidative stress and their effect on mitochondrial function have not been characterized yet. In the present study, the mitochondria antioxidant effect of ceria and ceria-supported gold nanoparticles, with or without triphenylphosphonium functionalization, was assessed in HeLa cells. The effect caused by ceria nanoparticles on mitochondria function in terms of mitochondrial membrane potential (Delta Psi m), adenosine triphosphate (ATP) production, nuclear respiratory factor 1 (NRF1) and nuclear factor erythroid-2 like 1 (NFE2L1) was reversed by the presence of gold. Furthermore, this effect was enhanced when nanoparticles were functionalized with triphenylphosphonium. Our study illustrates how the mitochondrial antioxidant effect induced by ceria nanoparticles can be modulated by the presence of gold., This research was funded by Carlos III Health Institute and the European Regional Development Fund, grant number CP13/00252 and PI16/1083; the Catalonian Agency for Management of University and Research Grants, grant number 2017SGR1303; the Ministry of Education of the Valencian Regional Government, grant number PROMETEO/2019/027, The Foundation for the Promotion of Health and Biomedical Research of Valencia Region, grant number Nanobetes2.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of Green Public Procurement of Works by Spanish Public Universities

  • Fuentes Bargues, José Luis|||0000-0003-4877-3291
  • Ferrer-Gisbert, Pablo-S.|||0000-0001-6609-2081
  • González-Cruz, María-Carmen|||0000-0002-6987-5732
[EN] Universities play an important role among public institutions because they initiate huge purchasing and contracting activities and contribute to sustainable development through education, research, and day-to-day operations. Existing studies on green public procurement (GPP) practices at Spanish universities focus on products and services. For this study, a total of 316 procedures were collected and analysed from the calls for tenders made by Spanish public universities between 2016 and 2017. The environmental criteria involved in the tenders and their weights were classified by subsector, geographical scope, and project budget. The results of this study show the use of environmental criteria in the works tendered by Spanish public universities is low (19.2%) in comparison with the results of other studies. It is therefore necessary to encourage GPP practices in the contracting process to comply with the environmental policies that universities have defined as part of their institutional policies., This research was funded by the Conselleria de Educacion, Investigacion, Cultura y Deporte of the Generalitat Valenciana through the project Analysis of the Green Public Procurement (CPV) of Works in the Valencian Community and Development of Indicators for their evaluation, grant number [GV/2017/027] of the R + D + i Projects for Emerging Research Groups 2017.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

CNNs for Automatic Glaucoma Assessment using Fundus Images: An Extensive Validation

  • Díaz-Pinto, Andrés Yesid
  • Köhler, Thomas
  • Navea, Amparo
  • Morales, Sandra|||0000-0003-0763-1545
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
  • Mossi García, José Manuel|||0000-0001-9083-3476
[EN] Background: Most current algorithms for automatic glaucoma assessment using fundus images rely on handcrafted features based on segmentation, which are affected by the performance of the chosen segmentation method and the extracted features. Among other characteristics, Convolutional Neural Networks (CNNs) are known because of their ability to learn highly discriminative features from raw pixel intensities. Methods: In this paper, we employed five different ImageNet-trained models (VGG16, VGG19, InceptionV3, ResNet50 and Xception) for automatic glaucoma assessment using fundus images. Results from an extensive validation using cross-validation and cross-testing strategies were compared with previous works in the literature. Results: Using five public databases (1707 images), an average AUC of 0.9605 with a 95% confidence interval of 95.92% - 97.07%, an average specificity of 0.8580 and an average sensitivity of 0.9346 were obtained after using the Xception architecture, significantly improving the performance of other state-of-the-art works. Moreover, a new clinical database, ACRIMA, has been made publicly available, containing 705 labelled images. It is composed of 396 glaucomatous images and 309 normal images, which means, the largest public database for glaucoma diagnosis. The high specificity and sensitivity obtained from the proposed approach are supported by an extensive validation using not only the cross-validation strategy but also the cross-testing validation on, to the best of the authors' knowledge, all publicly available glaucoma-labelled databases. Conclusions:These results suggest that using ImageNet-trained models is a robust alternative for automatic glaucoma screening system. All images, CNN weights and software used to fine-tune and test the five CNNs are publicly available, which could be used as a testbed for further comparisons., This work was supported by the Ministerio de Economia y Competitividad of Spain, Project ACRIMA [TIN2013-46751-R] and the Project GALAHAD [H2020-ICT-2016-2017, 732613]. In particular, the work of Andres Diaz-Pinto has been supported by the Generalitat Valenciana under the scholarship Santiago Grisolia [GRISOLIA/2015/027]. (Corresponding author: Andres Diaz-Pinto). We gratefully acknowledge the support of NVIDIA Corporation with the donation of the Titan V GPU used for this research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fuzzy quasi-metric spaces

  • Gregori, Valentín
  • Romaguera, Salvador
[EN] We generalize the notions of fuzzy metric by Kramosil and Michalek, and by George and Veeramani to the quasi-metric setting.We show that every quasi-metric induces a fuzzy quasi-metric and ,conversely, every fuzzy quasi-metric space generates a quasi-metrizable topology. Other basic properties are discussed., The authors acknowledge the support of Generalitat Valenciana, grant GRUPOS 03/027
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Synthesis of Cysteine Fluorophore Conjugates by Visible-Light-Promoted Thiol Ene Coupling Using Organic Photocatalysts

  • Bellaizac-Riascos, Angie Julieth
  • Ortiz Serna, Mª Pilar
  • Pérez-Ruiz, Raúl|||0000-0003-1136-3598
  • Encinas Perea, Susana|||0000-0001-5275-8436
  • Jiménez, M Consuelo|||0000-0002-8057-4316
[EN] In this work, we have investigated the visible-light-mediated thiol¿ene coupling of N-acetyl-L-cysteine methyl ester with structurally distinct alkene-functionalized fluorophores using metal-free organic photocatalysts under mild conditions. The fluorophore set com prised naphthalene, naphthalimide, and aromatic diimide derivatives featuring different alkene environments and linker architec tures. The transformations were promoted under mild and metal-free conditions using five organic photocatalysts belonging to three distinct structural families, namely acridinium salts, BOPHY derivatives, and xanthene dyes. The methodology proved to be compati ble with structurally diverse fluorophore architectures and enabled the efficient preparation of both mono- and bis-functionalized cysteine conjugates. Reaction efficiency was influenced by fluorophore structure and photocatalyst identity, with yields reaching up to 95% for styrenyl naphthalimide derivatives. Sequential thiol¿ene additions were successfully achieved for divinyl fluorophores, pro viding access to doubly functionalized products under the same reaction conditions. Photophysical studies demonstrated that cysteine incorporation generally preserves the absorption and emission characteristics of the parent fluorophores and, in several cases, leads to enhanced fluorescence quantum yields. These results establish visible-light-mediated thiol¿ene coupling as a straightforward and versatile approach for the preparation of fluorescent cysteine building blocks from structurally diverse fluorophore scaffolds., This study was supported by Agencia Estatal de Investigación (PID2022- 138189NB-I00), Generalitat Valenciana (CIGRIS/2022/027), and European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Transient analysis of the conventional filtered-x affine projection algorithm for active noise control

  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • de Diego Antón, María|||0000-0001-9948-3396
  • Piñero, Gema|||0000-0002-8719-8106
[EN] Affine projection (AP) algorithms have been proposed in recent years for use in active noise control systems. This is due to their potential high convergence speed along with their robustness and moderate computational cost. However, these algorithms can exhibit an excessive computational cost for high projection orders (just when higher convergence speed is achieved). Thus, computationally efficient versions of these algorithms have been proposed. For the particular case of the AP algorithms applied to active noise control, the use of the conventional filtered-x structure instead of the commonly used modified filtered-x method can be understood as an efficient strategy, since it needs fewer operations to update the adaptive filter coefficients. However, the use of this structure implies different algorithm behavior for the following two reasons: the signals needed in the coefficient updates do not correspond exactly to the AP algorithm and this structure introduces a delay between the update of the adaptive filter coefficients and its effect on the noise signal. In practice, this dual effect mainly affects convergence of the algorithms in the transient regime. This correspondence presents a mathematical model so that the transient behavior of the conventional filtered-x AP algorithm can be predicted from the reference signal statistics and algorithm parameters., This work was supported in part by the Spanish Ministerio de Ciencia e Innovacion TEC2009-13741, Generalitat Valenciana PROMETEO 2009/0013, Generalitat Valenciana GV/2010/027, and Universidad Politécnica de Valencia PAID-06-09.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of the Situation of Social Public Procurement of Works at the Valencian Region (Spain)

  • Fuentes Bargues, José Luis|||0000-0003-4877-3291
  • Maria-José Bastante-Ceca|||0000-0001-5557-1335
  • Ferrer-Gisbert, Pablo-S.|||0000-0001-6609-2081
  • González-Cruz, María-Carmen|||0000-0002-6987-5732
[EN] Construction is one of the most important sectors in terms of economic volume and number of employees. It represents approximately 10% of the Gross Domestic Product of the European Union and employs 7% of its total labour force. In a construction project, procurement is employed in many of the stages, so it can constitute an adequate mechanism to integrate sustainability initiatives. Research concerning economic aspects in procurement has always been present in the construction sector, whereas research related to environmental aspects has been gaining attention in the last years. Nevertheless, social aspects are still not very present in the literature on public procurement. The main objective of this research is to analyse the use of social criteria in public tendering processes of public works in the Valencian region of Spain. The results show that Valencian public entities include social criteria for the 11.7% of adjudicated public works. This value is very low when compared with other studies developed in different countries worldwide. Social criteria, just like in other cases, are used more frequently the larger the budget of the project and the longer the execution time. The average weight of social criteria for the tendering process is low (7.0 out of 100), although entities that usually consider these criteria are aware of their importance and give them a higher weight, in global terms., The APC was funded by Universitat Politecnica de Valencia, Spain
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Wideband QAM-over-SMF/turbulent FSO downlinks in a PON architecture for ubiquitous connectivity

  • Nguyen, Dong-Nhat
  • Vallejo-Castro, Luis
  • Bohata, Jan
  • Ghassemlooy, Zabih
  • Zvanovec, Stanislav
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We propose and investigate for the first time a seamless millimeter-wave (mmW) radio-over-fiber (RoF) and radio-over-free-space optics (FSO)-based downlink for use in a passive optical network architecture using 4-, 16- and 64-quadrature amplitude modulation (QAM) for broadband wireless access (BWA) networks. The proposed system is implemented in both experiment and simulation to realize continuous and ubiquitous coverage in urban and rural areas. We outline, a proof-of-concept demonstration of 4-, 16- and 64-QAMs at data rates of 34, 67 and 100 Mb/s, respectively transmitted over a 15 km standard single-mode fiber (SMF), which is then optically up-converted to 25 GHz for transmission over a 10 km of SMF and a 2 m of FSO channel under a non-uniform turbulent condition. We show the measured error vector magnitude (EVM) values of 13, 9.2 and 7.3% for 4-, 16- and 64-QAM, respectively, which are below the corresponding standard EVM requirements and therefore confirm the practicality of the proposed hybrid system. Depending on the data rates, each modulation can be adaptively configured. We report a simulation of a 10 Gb/s 4- and 64-QAM hybrid RoF-FSO downlink under an extended non-uniform turbulence regime to verify the feasibility of the proposed scheme for use in practical applications. By implementing the decision-directed carrier phase recovery and linear electrical equalization, EVMs can be efficiently reduced below the required limits. We further evaluate the proposed system performance in terms of the bit error rates, constellation diagrams, received optical and mmW powers. Using state-of-the-art K-band power amplifiers and conical horn antennas, the maximum wireless transmission distance is estimated to be about 135 m for use in the last-mile BWA networks., This work was supported in part by the Ministry of Education, Youth and Sports of Czech Republic (CZ.02.2.69/0.0/0.0/16_027/0008465), and in part by European Cooperation in Science and Technology COST CA16220 and CTU project SGS20/166/OHK3/3T/13.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Computer-aided Glaucoma Diagnosis using Stochastic Watershed Transformation on Single Fundus Images

  • Díaz-Pinto, Andrés Yesid
  • Navea, Amparo
  • Morales, Sandra|||0000-0003-0763-1545
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
[EN] Glaucoma is a chronic eye disease and one of the major causes of permanent blindness. Since it does not show initial symptoms, early diagnosis is important to limit its progression. This paper presents an automatic optic nerve characterization algorithm for glaucoma diagnosis based only on retinal fundus images. For optic cup segmentation, we used a new method based on the stochastic watershed transformation applied on the YIQ colour space to extract clinical indicators such as the Cup/Disc ratio, the area Cup/Disc ratio and the ISNT rule. Afterwards, an assessment between normal and glaucomatous fundus images is performed. The proposed algorithm was evaluated on 6 different (private and public) databases containing 723 images (377 normal and 346 glaucomatous images) which achieved a specificity and sensitivity of 0.674 and 0.675, respectively. Moreover, an F-score of 0.770 was obtained when evaluating this method on the publicly available database Drishti-GS1. A comparison of the proposed work with other state-of-the-art methods demonstrates the robustness of the proposed algorithm; because it was tested using images from different databases with high variability, which is a common issue in this area. Additional comparisons with existing works for cup segmentation, that use the publicly available database Drishti-GS1, are also presented in this paper., The authors would like to thank K. Narasimhan from SASTRA University for facilitating access to their database and gratefully acknowledge the support of NVIDIA Corporation with the donation of the Titan V GPU used for this research. This work was supported by the Project GALAHAD [H2020-ICT-2016-2017, 732613]. In particular, the work of Andres Diaz-Pinto has been supported by the Generalitat Valenciana under the scholarship Santiago Grisolia [GRISOLIA/2015/027].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Estudio y análisis de los polímeros derivados del estireno-butadieno, Study and analysis of polymers styrene-butadiene derivatives

  • Juárez Varón, David|||0000-0003-3251-8851
  • Balart, Rafael|||0000-0001-5670-7126
  • Ferrándiz Bou, Santiago|||0000-0001-7137-9298
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
[EN] This article aims to study and analyze polymers derived from styrene-butadiene, known as SBR rubber, being the most widely used worldwide and having replaced almost entirely natural rubber, identifying their properties, classification, applications and possible additives, [ES] El presente artículo tiene como objetivo el estudio y análisis de los polímeros derivados del estireno-butadieno, más conocidos como cauchos SBR, siendo los más utilizados a nivel mundial y habiendo sustituido prácticamente en su totalidad al natural, identificando sus propiedades, clasificación, aplicaciones y posibles aditivos., Authors thank “Ministerio de Ciencia y Tecnología”, Ref: DPI2007-66849-C02-02 and Generalitat Valenciana FPA/2010/027 for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Rheological characterization and mathematical modeling of a SEBS blend for industrial applications where nowadays liquid silicone rubber is used

  • Juárez Varón, David|||0000-0003-3251-8851
  • Ferrándiz Bou, Santiago|||0000-0001-7137-9298
  • Balart, Rafael|||0000-0001-5670-7126
  • Reig-Pérez, Miguel Jorge|||0000-0003-0226-1194
  • Peydro, M. A.|||0000-0002-8503-1505
[EN] SEBS (styrene-ethylene/butylene-styrene) is a hydrogenated SBS used as a compatibilizer of other thermoplastic or as a blend to improve the properties (mainly impact). There is very little information about SEBS's research, independent of other materials. This study focuses on a blend from the provider's SEBS extreme hardness (50% Shore-A 5 and 50% Shore-A 90) in order to analyze the miscibility of mixed materials from the storage of 2 references only. It has been used the thermoplastic elastomer Megol TA (R) SEBS, whose characteristics make it special due to the wide range of hardness and transparency, and can be obtained blend for industrial applications where nowadays liquid silicone rubber is used. Next step is rheological characterization of the blend, analyzing the viscosity for subsequent mathematical modeling. Finally, in order to reproduce the rheological behavior of materials during the injection process, Autodesk Moldflow Inside 2010 (TM) CAE (Computer Aided Engineering) tool has been used with Cross-WLF model parameters, and compared with tests injected., Authors thanks ‘‘Ministerio de Ciencia y Tecnología’’, Ref: DPI2007-66849-C02-02 and Generalitat Valenciana FPA/2010/027 for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

On N-PAM and M-QAM implementation within the hybrid RoF-FSO-PON system

  • Nguyen, Dong-Nhat
  • Zvanovec, Stanislav
  • Bohata, Jan
  • Vallejo-Castro, Luis
  • Ghassemlooy, Zabih
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] This paper investigates an optical transmission architecture of a passive optical network (PON), which is compatible with the millimeter-wave radio-over-fiber and free-space optics systems (RoF-FSO) under weak-to-strong atmospheric turbulence (AT) regimes to enable seamless connectivity as part of next-generation broadband wireless access networks. We first analyze and evaluate in simulation the transmission performance of the integrated system at 40 GHz for 10 Gb/s N-pulse amplitude modulation (N-PAM) with N = 2, 4. Link performance shows that, 4-PAM outperforms 2-PAM in terms of tolerance to the combined impairment of fiber chromatic dispersion and AT. We then experimentally demonstrate the proof-of-concept integrated RoF-FSO-PON at 25 GHz using 20 MHz M-quadrature amplitude modulation (M-QAM) signals with M = 4, 16, 64. We show that, for QAM with a higher-order M, the link performance is being more affected by the combined impairments., This work is supported by International Mobility of Researchers in CTU (CZ.02.2.69/0.0/0.0/16_027/0008465) and MEYS INTER-COST project (within LTC18008).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The Effect of the Varietal Type, Ripening Stage, and Growing Conditions on the Content and Profile of Sugars and Capsaicinoids in Capsicum Peppers

  • Guijarro-Real, Carla
  • Pires, Cherrine K.
  • Ribes-Moya, Ana M.
  • Adalid-Martinez, Ana Maria|||0000-0002-3927-1348
  • Fita, Ana|||0000-0002-8637-5852
  • Rodríguez Burruezo, Adrián|||0000-0002-4530-8071
[EN] Peppers (Capsicum sp.) are used both as vegetables and/or spice and their fruits are used in a plethora of recipes, contributing to their flavor and aroma. Among flavor-related traits, pungency (capsaicinoids) and lately volatiles have been considered the most important factors. However, the knowledge of sugars is low, probably due to the fact peppers were historically considered tasteless. Here, using HPLC, we studied the content and profile of major sugars and capsaicinoids in a comprehensive collection of varietal types (genotype, G), grown under different growing systems (environment, E) in two years (Y) and considered the two main ripening stages (R). We found a major contribution to the ripening stage and the genotype in total and individual sugars and capsaicinoids. The year was also significant in most cases, as well as the G x E and G x Y interactions, while the growing system was low or nil. Ripening increased considerably in sugars (from 19.6 to 36.1 g kg(-1) on average) and capsaicinoids (from 97 to 142 mg kg(-1) on average), with remarkable differences among varieties. Moreover, sugars in fully ripe fruits ranged between 7.5 and 38.5 g kg(-1) in glucose and between 5.2 and 34.3 g kg(-1) in fructose, and several accessions reached total sugars between 40 and 70 g kg(-1), similar to tomatoes. The results reveal the importance of the genotype and the ripening for these traits, particularly sugars, which should be considered key for the improvement of taste and flavor in peppers., This study was financed by the AEI, project PID2019-110221RR-C32, and partially by (i) the AGROALNEXT/2022/027 grant from Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital (Generalitat Valenciana, Spain) and MCIN, NextGenerationEU (PRTR-C17.I1) Funds, and by (ii) the CIPROM/2021/020 grant from Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital (Generalitat Valenciana, Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An affine projection algorithm with variable step-size and projection order

  • Gonzalez, Alberto|||0000-0002-6984-3212
  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • de Diego Antón, María|||0000-0001-9948-3396
  • Piñero, Gema|||0000-0002-8719-8106
It is known that the performance of adaptive algorithms is constrained by their computational cost. Thus, affine projection adaptive algorithms achieve higher convergence speed when the projection order increases, which is at the expense of a higher computational cost. However, regardless of computational cost, a high projection order also leads to higher final error at steady state. For this reason it seems advisable to reduce the computational cost of the algorithm when high convergence speed is not needed (steady state) and to maintain or increase this cost only when the algorithm is in transient state to encourage rapid transit to the permanent regime. The adaptive order affine projection algorithm presented here addresses this subject. This algorithm adapts its projection order and step size depending on its convergence state by simple and meaningful rules. Thus it achieves good convergence behavior at every convergence state and very low computational cost at steady state., This work was partially funded by Spanish MICINN TEC2009-13741, GV-PROMETEO/2009/0013, GV/2010/027 and UPV/2009-1034.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ethylene biosynthesis and perception during ripening of loquat fruit (Eriobotrya japonica Lindl.)

  • Alós, E.
  • Rodrigo, M.J.
  • ZACARIAS, L.
  • Martinez Fuentes, Amparo|||0000-0002-8594-4953
  • Reig Valor, Carmina|||0000-0002-1911-6834
  • Mesejo Conejos, Carlos|||0000-0002-6984-0775
  • Agustí Fonfría, Manuel|||0000-0002-4271-6299
[EN] In order to gain insights into the controversial ripening behavior of loquat fruits, in the present study we have analyzed the expression of three genes related to ethylene biosynthesis (ACS1, ACO1 and ACO2), two ethylene receptors (ERS1a and ERS1b), one signal transduction component (CTR1) and one transcription factor (EIL1) in peel and pulp of loquat fruit during natural ripening and also in fruits treated with ethylene (10 mu LL-1) and 1-MCP (10 mu LL-1), an ethylene action inhibitor. In fruits attached to or detached from the tree, a slight increase in ethylene production was detected at the yellow stage, but the respiration rate declined progressively during ripening. Accumulation of transcripts of ethylene biosynthetic genes did not correlate with changes in ethylene production, since the maximum accumulation of ACS1 and ACO1 mRNA was detected in fully coloured fruits. Expression of ethylene receptor and signaling genes followed a different pattern in peel and pulp tissues. After fruit detachment and incubation at 20 degrees C for up to 6 days, ACS1 mRNA slightly increased, ACO1 experienced a substantial increment and ACO2 declined. In the peel, these changes were advanced by exogenous ethylene and partially inhibited by 1-MCP. In the pulp, 1-MCP repressed most of the changes in the expression of biosynthetic genes, while ethylene had almost no effects. Expression of ethylene perception and signaling genes was barely affected by ethylene or 1-MCP. Collectively, a differential transcriptional regulation of ethylene biosynthetic genes operates in peel and pulp, and support the notion of non-climacteric ripening in loquat fruits. Ethylene action, however, appears to be required to sustain or maintain the expression of specific genes. (C) 2016 Published by Elsevier GmbH., Enriqueta Alos was recipient of a post-doctoral contract JAE-DocCSIC (Fondo Social Europeo). The financial support of the researchgrants FP7-PEOPLE-2011-CIG-2011-303652 (Marie Curie Actions, European Union), AGL-2009-11558 and AGL-2012-34573 (Ministerio Economia y Competitividad, Spain), GV/2012/036 (Generalitat Valenciana, Spain) and PROMETEOII 2014/27 (Generalitat Valenciana) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The teaching size: computable teachers and learners for universal languages

  • Telle, Jan Arne
  • Hernández-Orallo, José|||0000-0001-9746-7632
  • Ferri Ramírez, César|||0000-0002-8975-1120
[EN] The theoretical hardness of machine teaching has usually been analyzed for a range of concept languages under several variants of the teaching dimension: the minimum number of examples that a teacher needs to figure out so that the learner identifies the concept. However, for languages where concepts have structure (and hence size), such as Turing-complete languages, a low teaching dimension can be achieved at the cost of using very large examples, which are hard to process by the learner. In this paper we introduce the teaching size, a more intuitive way of assessing the theoretical feasibility of teaching concepts for structured languages. In the most general case of universal languages, we show that focusing on the total size of a witness set rather than its cardinality, we can teach all total functions that are computable within some fixed time bound. We complement the theoretical results with a range of experimental results on a simple Turing-complete language, showing how teaching dimension and teaching size differ in practice. Quite remarkably, we found that witness sets are usually smaller than the programs they identify, which is an illuminating justification of why machine teaching from examples makes sense at all., We would like to thank the anonymous referees for their helpful comments. This work was supported by the EU (FEDER) and the Spanish MINECO under grant RTI2018-094403-B-C32, and the Generalitat Valenciana PROMETEO/2019/098. This work was done while the first author visited Universitat Politecnica de Valencia and also while the third author visited University of Bergen (covered by Generalitat Valenciana BEST/2018/027 and University of Bergen). J. Hernandez-Orallo is also funded by an FLI grant RFP2-152.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Mejora de la inercia térmica de mezclas de sebs mediante la adición de materiales con cambio de fase (PCMs) a 28 ºC, Improvement of thermal inertia of sebs blends by addition of phase change materials (pcms) at 28ºc

  • Juárez Varón, David|||0000-0003-3251-8851
  • Ferrándiz Bou, Santiago|||0000-0001-7137-9298
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Balart, Rafael|||0000-0001-5670-7126
[EN] In this work, microencapsulated phase change materials (PCMs) with a melting temperature of 28 ºC have been used to improve thermal inertia phenomena on an elastomeric matrix of styrene-ethylene/butylenes-styrene (SEBS) material. The amount of PCMs has varied in the 1- 10 wt. % and these materials have been processed by conventional injection molding without PCM degradation. Mechanical characterization of SEBS-PCM compounds has been carried out and the obtained results show good maintenance of both resistant and ductile properties for PCM amounts comprised in the 1-5 wt. % range. SEM analysis has revealed good interaction between PCM microcapsules and SEBS matrix which is a critical aspect to obtain good mechanical performance. The effect of PCM addition on thermal inertia has been evaluated by active infrared thermography, showing a remarkable effect on thermal regulation of SEBS in the temperature range close to the melting point of the PCM (28 ºC). This thermoregulation effect is more accurate as the PCM content increases. Also, cooling curves have been constructed in order to quantify the thermal inertia effect in a cooling process., [ES] Se han empleado en este trabajo materiales microencapsulados con cambio de fase (PCMs) con el objetivo de mejorar la inercia térmica en una matriz elastomérica de estirenoetileno/butileno-estireno (SEBS). La cantidad de PCM ha variado entre los porcentajes en peso de 1-10% y estos materiales han sido procesados mediante moldeo por inyección convencional sin degradación del PCM. Se ha llevado a cabo una caracterización mecánica de los compuestos de SEBS-PCM y los resultados obtenidos muestran un buen mantenimiento de las propiedades resistentes y dúctiles para cantidades de PCM comprendidas en un rango entre el 1-5 % en peso. El análisis SEM ha puesto de manifiesto la buena interacción entre microcápsulas PCM y la matriz de SEBS, aspecto crítico para obtener un buen rendimiento mecánico. El efecto de la adición de PCM en la inercia térmica ha sido evaluada mediante termografía infrarroja activa, mostrando un efecto notable en la regulación térmica del SEBS en el intervalo de temperatura cercano al punto de fusión del PCM (28 °C). Este efecto de termorregulación es más preciso a medida que aumenta el contenido de PCM. Además, se han construido curvas de enfriamiento con el fin de cuantificar el efecto de inercia térmica en un proceso de enfriamiento., Authors thank “Ministerio de Ciencia y Tecnología”, Ref: DPI2007-66849-C02-02 and Generalitat Valenciana FPA/2010/027 for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Convex combination filtered-X algorithms for active noise control systems

  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • de Diego Antón, María|||0000-0001-9948-3396
  • Piñero, Gema|||0000-0002-8719-8106
Adaptive filtering schemes exhibit a compromise between convergence speed and steady-state mean square error. Trying to overcome this trade-off, convex combination of adaptive filters have been recently developed for system identification achieving better performance than traditional approaches. The purpose of this work is to apply the convex combination strategy to single-channel and multichannel active noise control systems. In these systems it is necessary to take into account the secondary path between the adaptive filter output and the error sensor and the possible unavailability of the disturbance signal, which depends on the filtering scheme considered. Even though this strategy involves a higher computational burden than the classic adaptive filters, it exhibits a good performance in terms of convergence speed and steady-state mean square error., This work was supported in part by the Spanish Ministerio de Ciencia e Innovacion TEC2009-13741, Generalitat Valenciana PROMETEO 2009/0013, Generalitat Valenciana GV/2010/027, and Universitat Politecnica de Valencia PAID-06-09. The associate editor coordinating the review of this manuscript and approving it for publication was Prof. Boaz Rafaely.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact of float-valves on water meter performance under intermittent and continuous supply conditions

  • AL-Washali, Taha
  • Mahardani, Meidy
  • Sharma, Saroj
  • Kennedy, Maria
  • Arregui de la Cruz, Francisco|||0000-0002-1359-2071
[EN] Intermittent supply is common worldwide. It triggers households with piped connection to adjust the supply scheme by the use of a water tank with a float valve (FV) at the entrance, which has a major influence on the water meter accuracy. This study investigated the impact of the water tank with a FV on the performance of water meters under intermittent and continuous supply conditions, using laboratory experiments, field measurements, and hydraulic modeling. Results revealed that the inflow rates into the water tank are consistently lower than the outflow rates of the tank. This will always be the case owing to the balancing mechanism of the tank. The flows that pass through the water meter represent the inflows into the tank. Therefore, higher metering errors and more apparent losses are expected for a combination of a water tank, FV, and continuous supply. Besides, different FV types have different hydraulic characteristics. Larger FVs with higher discharge rates tend to maintain the water level close to the full level in the tank and conferred longer periods of low flows, worse meter performance, and more apparent losses. For intermittent supply, results confirmed that higher intermittency levels lead to improved performance of water meters and reduce the apparent losses. This points to the complication in transformation from intermittent to continuous supply worldwide. In this case, water utilities should expect higher meter errors and more revenue losses unless the meter replacement policy recognises lower flows passing through the meter., This work was funded by the NICHE 027YE Project of the Dutch Organisation for Internationalisation in Education (NUFFIC); the Water and Environment Center of Sana'a University, Yemen; and MetaMeta Research, The Netherlands. The authors thank Bandung Metrology Center, Indonesia for facilitating the laboratory experiments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improvement of thermal inertia of styrene-ethylene/butylene-styrene (SEBS) polymers by addition of microencapsulated phase change materials (PCMs)

  • Juárez Varón, David|||0000-0003-3251-8851
  • Ferrándiz Bou, Santiago|||0000-0001-7137-9298
  • Fenollar, Octavio|||0000-0003-4323-7414
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Balart, Rafael|||0000-0001-5670-7126
[EN] In this work, microencapsulated phase change materials (PCMs) with a melting temperature of 52 °C have been used to improve thermal inertia phenomena on an elastomeric matrix of styrene-ethylene/butylene-styrene (SEBS) material. The amount of PCMs has varied in the 1-10 wt.% and these materials have been processed by conventional injection molding without PCM degradation. Mechanical characterization of SEBS-PCM compounds has been carried out and the obtained results show good maintenance of both resistant and ductile properties for PCM amounts comprised in the 1-5 wt.% range. Scanning electron microscopy (SEM) analysis has revealed good wetting properties of PCM microcapsules with the SEBS matrix which is a key factor to obtain good mechanical performance. The effect of PCM addition on thermal inertia has been evaluated by active infrared thermography (IRT), showing a remarkable effect on thermal regulation of SEBS in the temperature range close to the melting point of the PCM (52 °C). This thermoregulation effect is more accurate as the PCM content increases. Also, cooling curves have been constructed in order to quantify the thermal inertia effect in a cooling process. © 2010 Elsevier Ltd. All rights reserved., Authors thank "Ministerio de Ciencia y Tecnologia", Ref: DPI2007-66849-C02-02 and Generalitat Valenciana FPA/2010/027 for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Fluorogenic Biosensor for Direct Detection of Vibrio vulnificus, a Climate Change Biomarker

  • Aranda-Sobrino, María Nieves
  • Carmona-Salido, Héctor
  • Sanjuán, Eva
  • Amaro, Carmen
  • Caballos-Gómez, María Isabel
  • López-Palacios, Alba|||0000-0002-4397-277X
  • Aznar, Elena|||0000-0003-0361-3876
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Hernández-Montoto, Andy|||0000-0001-5623-9836
[EN] Vibrio vulnificus, a marine pathogen and climate change biomarker, poses serious risks to human and animal health through seafood consumption and seawater exposure. Rapid detection methods are urgently needed for both vibriosis diagnosis and surveillance in warming coastal waters. We report a fluorogenic biosensor based on nanoporous anodic alumina loaded with rhodamine B and capped with an oligonucleotide probe targeting a unique sequence of the vvhA cytolysin gene, specific to V. vulnificus. In the presence of the target DNA, the probe is displaced, pores open, and the fluorophore is released, generating a measurable signal. The biosensor exhibited high sensitivity and selectivity across diverse matrices, including fish mucus and serum, human serum, sterilized brackish water, and-critically-unprocessed natural lake and seawater samples, without DNA extraction or amplification. Detection limits ranged between 10 & sup2; and 5 & times; 10 & sup2; CFU mL(-)& sup1;, comparable in sensitivity to state-of-the-art qPCR assays. The biosensor outperformed conventional approaches in speed, simplicity, and cost-effectiveness, while maintaining accuracy. These findings underscore the potential of this platform for integrated One Health applications, bridging environmental monitoring with rapid diagnosis of vibriosis in humans and animals.Preliminary results from this study were previously made available as a preprint in SSRN (DOI: https://ssrn.com/abstract=5032822)., Ministerio de Ciencia, Innovación y Universidades (MICIU) and the Agencia Estatal de Investigación (AEI/10.13039/501100011033), with co‐ funding from the European Regional Development Fund (ERDF), European Union, Grant/Award Numbers: PID2020‐120619RB‐I00, PID2024‐162627OB‐I00, PID2021‐126304OB‐C41, PID2024‐155683OB‐C41; Generalitat Valenciana (Spain), Grant/Award Numbers: CIAICO/2021/293, CIAICO/2024/236; Spanish Ministry of Science and Innovation (MCIN) with funding from the European Union European Union NextGenerationEU (PRTR‐C17.I1) and the Generalitat Valenciana (GVA‐THINKINAZUL/2021/027; Principal Investigators: Carmen Amaro and B. Fouz, Universitat de València); Instituto de Salud Carlos III, Grant/Award Number: CIBER ConsorcioCentrodeInvestigaciónBiomédicaenRed(CB06/01/2012)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Rats with minimal hepatic encephalopathy show reduced cGMP-dependent protein kinase activity in hypothalamus correlating with circadian rhythms alterations

  • Felipo, Vicente
  • Piedrafita, Blanca
  • Barios, Juan A.
  • Agustí, Ana
  • Ahabrach, Hanan
  • Romero-Vives, María
  • Barrio, Luis C.
  • Rey, Beatriz
  • Gaztelu, Jose M.
  • Llansola, Marta
[EN] Patients with liver cirrhosis show disturbances in sleep and in its circadian rhythms which are an early sign of minimal hepatic encephalopathy (MHE). The mechanisms of these disturbances are poorly understood. Rats with porta-caval shunt (PCS), a model of MHE, show sleep disturbances reproducing those of cirrhotic patients. The aims of this work were to characterize the alterations in circadian rhythms in PCS rats and analyze the underlying mechanisms. To reach these aims, we analyzed in control and PCS rats: (a) daily rhythms of spontaneous and rewarding activity and of temperature, (b) timing of the onset of activity following turning-off the light, (c) synchronization to light after a phase advance and (d) the molecular mechanisms contributing to these alterations in circadian rhythms. PCS rats show altered circadian rhythms of spontaneous and rewarding activities (wheel running). PCS rats show more rest bouts during the active phase, more errors in the onset of motor activity and need less time to re-synchronize after a phase advance than control rats. Circadian rhythm of body temperature is also slightly altered in PCS rats. The internal period length (tau) of circadian rhythm of motor activity is longer in PCS rats. We analyzed some mechanisms by which hypothalamus modulate circadian rhythms. PCS rats show increased content of cGMP in hypothalamus while the activity of cGMP-dependent protein kinase was reduced by 41% compared to control rats. Altered cGMP-PKG pathway in hypothalamus would contribute to altered circadian rhythms and synchronization to light. Guardar / Salir Siguiente >, This study was supported by the Ministerio de Ciencia e Innovacio´n (SAF2011-23051, CSD2008-00005 and SAF2009-11614), Consellerı´a Educacio´n Generalitat Valenciana (PROMETEO-2009-027, ACOMP/2012/066, ACOMP/2013/101, PROMETEOII/2014/033) and the Comunidad Auto´noma de Madrid (Proyecto NEUROTEC)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Stability anomalies of some jacobian-free iterative methods of high order of convergence

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • García-Maimo, Javier
  • Vassileva, Maria Penkova
[EN] In this manuscript, we design two classes of parametric iterative schemes to solve nonlinear problems that do not need to evaluate Jacobian matrices and need to solve three linear systems per iteration with the same divided difference operator as the coefficient matrix. The stability performance of the classes is analyzed on a quadratic polynomial system, and it is shown that for many values of the parameter, only convergence to the roots of the problem exists. Finally, we check the performance of these methods on some test problems to confirm the theoretical results., This research was partially supported by Ministerio de Economia y Competitividad under grants PGC2018-095896-B-C22, Generalitat Valenciana PROMETEO/2016/089 and FONDOCYT 027-2018 and 029-2018, Dominican Republic.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Social network multiple-criteria decision-making approach for evaluating unmanned ground delivery vehicles under the Pythagorean fuzzy environment

  • Zeng, Shouzhen
  • Zhang, Na
  • Zhang, Chonghui
  • Su, Weihua
  • Llopis-Albert, Carlos|||0000-0002-1349-2716
[EN] With the rapid development of instant delivery, the shrinking labor population and prevailing contact-free economy, companies have launched unmanned ground delivery vehicles (UGDVs) to replace human distribution with machines. To meet the requirements for selecting UGDVs and achieve better applications in community delivery, a multi-criteria decision-making (MCDM) framework, combining the self-confidence aggregation approach and social trust network, is proposed in this study. Based on the internal characteristics of UGDVs, a multi-criteria comprehensive evaluation system for UGDVs is constructed. Then, a trust propagation and aggregation mechanism to yield expert weights based on a social trust network is suggested. Further, a self-confidence Pythagorean fuzzy aggregation operator is proposed to enhance the credibility of the decision results and compensate for the defects of existing methods. Finally, a practical case is considered to demonstrate the complete process of the MCDM model and to conduct a comparative analysis and sensitivity analysis of the model., The authors are very grateful to the anonymous referees for their valuable comments and suggestions. This work was supported by National Social Science Foundation of China (No.18BTJ027, 20CTJ016, 21ATJ010).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Elaboración de material multimedia y uso de un entorno virtual en el proceso de enseñanza-aprendizaje de las prácticas de laboratorio en Química Física

  • López Tocón, Isabel
[EN] Using new technologies, such as the Moodle e-learning platform, a new and more active didactic strategy has been developed in the training of lab practices in subjects assigned to the Department of Physical Chemistry, specifically in the subject Basic Operations of Laboratory, which is taught in the first year of the Degree in Chemistry. A new multimedia and audiovisual teaching material has been designed and elaborated on the most basic procedures that are carried out in a chemical lab. This educational material serves as a support for the teacher in the lab classes, besides supposing a complement to the practices’ script for the students. In this way, we try to facilitate the autonomous learning of the student, to optimize the working time in the lab and to increase the availability of the teacher. A question bank has also been developed for each lab practices in order to carry out on-line tests of knowledge once the practice is finished., [ES] Haciendo uso de las nuevas tecnologías, como es la plataforma educativa Moodle, se ha desarrollado una nueva estrategia didáctica más activa y dinámica en la impartición de las prácticas de laboratorio en asignaturas adscritas al Departamento de Química Física, y en concreto en la asignatura de Operaciones Básicas de Laboratorio, que se imparte en el primer curso del Grado en Química. Se ha diseñado y elaborado un nuevo material didáctico multimedia y audiovisual, sobre los procedimientos más básicos que se realizan en un laboratorio químico, y que sirve como apoyo para el docente en las clases presenciales de laboratorio, y como complemento al guión de prácticas que recibe el alumno. De esta forma se intenta facilitar el aprendizaje autónomo del estudiante, optimizar el tiempo de trabajo en el laboratorio y aumentar la disponibilidad del profesor. También se ha elaborado un banco de preguntas para cada una de las prácticas con objeto de realizar pruebas de conocimiento on-line, una vez finalizada la práctica en el laboratorio., Este trabajo se enmarca dentro del Proyecto Docente PIE15-027, correspondiente a la Convocatoria de Proyectos de Innovación Educativa 2015-2017 de la Universidad de Málaga.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Resilient structures in the seismic retrofitting of RC frames: A case study

  • Pallarés Rubio, Francisco Javier|||0000-0003-4298-2287
  • Pallarés Rubio, Luis|||0000-0003-2126-2387
  • Domínguez, David
[EN] It is very important to allocate valuable resources efficiently when reconstructing buildings after earthquake damage. This paper proposes the use of a simple seismic retrofitting system to make buildings more resilient than the stiffer systems such as the shear walls implemented in Chile after the earthquake in 2010. The proposal is based on the use of steel chevron-type braces in RC buildings as a dual system to improve the seismic performance of multistory buildings. A case study was carried out to compare the proposal with the shear wall solution for the typical seismic Chilean RC building from the structural and economic perspectives. The results show that it is more resilient than other stiffer seismic solutions, such as shear walls, reduces the demand, minimizes seismic damage, gives reliable earthquake protection and facilitates future upgrades and repairs while achieving the level of immediate occupancy without the costs of the shear walls system., The authors wish to thank the Universitat Politecnica de Valencia (UPV) (PAID-00-17), the Generalitat Valenciana (GVA) and the Spanish Ministry of Economy and Competitiveness (MINECO) for the grants and funds received to support this investigation: BIA2012-35186, BIA2015-70651-R, BEST/2018.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Thermal Analysis (Differential Scanning Calorimetry And Thermogravimetric Analysis) Of SEBS Blends For Injection Molding

  • Juárez Varón, David|||0000-0003-3251-8851
  • Ferrándiz Bou, Santiago|||0000-0001-7137-9298
  • Peydro, M. A.|||0000-0002-8503-1505
  • Sanchez-Caballero, Samuel|||0000-0001-5322-8082
[EN] Thermal analysis (DSC: Differential Scanning Calorimetry and TGA: Thermogravimetric Analysis) of SEBS blends have been studied in this paper. SEBS blends were made using two transparent SEBS commercial grades with extreme hardness values. The first thermal property determined in SEBS blends was the evaluation of the thermal degradation at high temperatures (DSC). Another thermal property of the SEBS blends consists in knowing the degradation process of the blend (TGA). It should be emphasized the good resistance to degradation for both, the two commercial grades of virgin SEBS with extreme hardness, and blends obtained with these materials., Authors thank “Ministerio de Ciencia y Tecnología”, Ref: DPI2007-66849-C02-02 and Generalitat Valenciana FPA/2010/027 for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Transmission of 2 bits/symbol over RoF and RoFSO links with different architectures for ubiquitous coverage

  • Nguyen, Dong-Nhat
  • Zvanovec, Stanislav
  • Vallejo-Castro, Luis
  • Bohata, Jan
  • Ghassemlooy, Zabih
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] This paper investigates integrated radio-over-fiber and radio-over-free-space optic links in a passive optical network architecture for ubiquitous wireless coverage. Two optical millimeter-wave generation techniques, namely optical heterodyning and optical modulator-based up-conversion are used. In the first configuration, simulation results are achieved for transmission of 20-40 Gb/s 4-PAM over the 60 GHz heterodyned hybrid link. In the second configuration, transmission of 20 MHz 4-QAM over the up-converted 25 GHz hybrid system is examined. System performance evaluation and practical feasibility is carried out in terms of the received optical powers, bit error rates, eye diagrams, error vector magnitude and constellation diagrams., This work is supported by International Mobility of Researchers in CTU (CZ.02.2.69/0.0/0.0/16_027/0008465) and MEYS INTER-COST project (within LTC18008).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Estudio de materiales con cambio de fase (PCM) y análisis SEM de micro PCM, Study of phase change materials (PCM) AND SEM analysis of micro PCM

  • Juárez Varón, David|||0000-0003-3251-8851
  • Balart, Rafael|||0000-0001-5670-7126
  • Ferrándiz Bou, Santiago|||0000-0001-7137-9298
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
[EN] This study analyzes the different classifications of phase change materials available at industrial level, in order to identify those that are potentially viable for addition with thermoplastic materials. Also, select a potentially interesting PCM and perform microscopic analysis of it., [ES] El presente estudio pretende analizar las diferentes clasificaciones de materiales con cambio de fase disponibles a nivel industrial, para identificar aquellos que son potencialmente viables para su adición en materiales termoplásticos. Igualmente, seleccionar un PCM potencialmente interesante y llevar a cabo un análisis microscópico del mismo., Authors thank “Ministerio de Ciencia y Tecnología”, Ref. DPI2007-66849-C02-02 and Generalitat Valenciana FPA/2010/027 for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Association of Heterotic Groups with Morphological Relationships and General Combining Ability in Eggplant

  • Boyaci, Hatice Filiz
  • Unlu, Abdullah
  • Gumrukcu, Emine
  • Oten, Mehmet
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
[EN] The identification of heterotic groups may provide an important advantage for hybrid eggplant (Solanum melongena) breeding. In this study, we evaluated the combining ability and heterotic patterns of eggplant lines in order to develop improved eggplant cultivars resistant to Fusarium oxysporum f. sp. melongenae (FOM). A set of 62 inbred lines was evaluated with 32 morphological descriptors and their relationships were analyzed through a multivariate cluster analysis. A subset of 39 inbred lines was selected and, together with 15 sister lines, they were crossed with two testers to investigate their general combining ability (GCA) and to establish heterotic groups. Twenty selected inbred lines with high GCA were intercrossed using a half-diallel mating design. Eighty-two hybrids were obtained and evaluated for yield and yield components. We found no association between morphological distance and membership to specific heterotic groups. However, heterosis for yield was found in hybrids among parents from different heterotic groups or that were included in all heterotic groups. Among the hybrids evaluated, some were found to be highly productive and resistant to FOM, being candidates for the registration of new cultivars with dramatically improved characteristics., Scientific and Technological Research Council of Turkey financially supported this study with Project No: 107G027. Mariola Plazas gratefully acknowledges financial support from Generalitat Valenciana and Fondo Social Europeo for a post-doctoral grant (APOSTD/2018/014).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

La contratación pública de obras municipales. Análisis de los proyectos de ejecución de cementerios, Public procurement of municipal works. Analysis of cemetery execution projects

  • Fuentes Bargues, José Luis|||0000-0003-4877-3291
  • González-Cruz, María-Carmen|||0000-0002-6987-5732
  • Ferrer-Gisbert, Pablo-S.|||0000-0001-6609-2081
  • Maria-José Bastante-Ceca|||0000-0001-5557-1335
[EN] The public procurement of works from the local administration includes from new projects within the scope of building subsectro: administrative and educational buildings (schools, libraries) as within the scope of civil engineering subsector: housing developments, parks and gardens, sports infrastructure and/or bike lanes. Municipal public works also include the repair, rehabilitation and maintenance of municipal infrastructures such as lighting, air conditioning, roads and sidewalks, etc., which means a wide range of types of work. In a study carried out on public procurement in the Valencian Community during the years 2016 and 2017, it was found that, after road projects (including actions on public lighting), the projects most tendered by the local administration are extensions and improvements to cemeteries, which in most cases are municipally-owned. Given this importance, at least in terms of the number of projects identified, this communication is proposed in order to carry out an analysis of cemetery execution projects, identifying their main characteristics, typologies, construction processes, aspect of the tender, etc., [ES] La contratación pública de obras desde la administración local comprende desde proyectos de nueva planta dentro del ámbito de edificación: edificios administrativos y educativos (colegios, bibliotecas), etc., como dentro del ámbito obra civil: urbanizaciones, parques y jardines, infraestructuras deportivas y/o carriles bici. Dentro de las obras públicas municipales también se encuentran los trabajos de reparación, rehabilitación y mantenimiento de las infraestructuras municipales como alumbrado, climatización, viales y aceras, etc., lo que supone un abanico muy amplio de tipologías de obra. En un estudio realizado sobre la contratación pública en la Comunidad Valenciana durante los años 2016 y 2017 se ha podido comprobar que, tras los proyectos de reparaciones de viales y calzadas (incluyendo las actuaciones sobre alumbrado público), los proyectos más licitados por la administración local son las ampliaciones y mejoras de los cementerios, los cuáles en la mayoría de los casos tienen titularidad municipal. Dada esta importancia, al menos en el número de proyectos identificados, se propone esta comunicación que tiene como objeto realizar un análisis de los proyectos de ejecución de cementerios, identificando sus principales características, tipologías, procesos constructivos, aspecto de la licitación, etc., Este trabajo surge como resultado del proyecto GV/2017/027: Análisis de la Contratación Pública Verde (CPV) de Obras en la Comunidad Valenciana y Desarrollo de Indicadores para su Evaluación, aprobado en la convocatoria de Proyectos I+D+i para Grupos de I
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Directional Coupler Calibration for Accurate Online Incident Power Measurements

  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Gutiérrez Cano, José Daniel
  • García-Baños, Beatriz|||0000-0001-7862-3417
[EN] This letter proposes a calibration method to properly measure the incident power in a directional coupler (DC) when the measurement configuration has low directivity. The proposed method is based on measurements of short-circuits placed at different distances to calibrate the DC response. Results show that the method is clearly robust and provides accurate measurements even for directivities as low as 10 dB., This work was supported by the European Regional Development Fund (ERDF) through the Valencia Region 2014-2020 Operational Program under Project IDIFEDER/2018/027.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Use of Electrolyzed Water as Disinfection Technology in Aquaculture Systems: Effects on Vibrio harveyi, a Significant Marine Pathogen for Marine Fish and Invertebrates

  • Blasco, Adolfo
  • Ibányez-Payá, Pablo
  • Fouz, Belén
  • Amaro, Carmen
  • Amorós, Pedro
  • Ros-Lis, José Vicente
[EN] Background: The aquaculture sector is vital for food supply and marine species conservation. However, vibriosis poses significant threats, affecting fish and invertebrates. Vibrio harveyi outbreaks are increasing due to global warming-driven expansion of virulent strains. Methods: This study investigates the bactericidal potential of in situ-generated electrolyzed water (EW) as a complementary strategy to antibiotic therapy. Strains of V. harveyi isolated from diseased fish were exposed to EW under varying conditions of salinity (1.5 and 3%), pH (5, 6.5, and 7.5), and free available chlorine (FAC) (5, 20, 25, and 125 ppm) to reduce bacterial concentrations. Results: EW demonstrated high bactericidal potential at 20-25 ppm FAC and non-acidic pH, reducing bacterial populations by over four logarithmic units within 15 min. Efficacy diminished when EW was stored for days. Conclusions: EW shows a promising disinfection method during vibriosis outbreaks and as a preventive measure during stress in aquaculture. Its advantages include on-site production and avoidance of concentrated chemicals, which minimize health risks., This study forms part of the ThinkInAzul programme and was supported by MICIU with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (GVA-THINKINAZUL/2021/028; principle investigator: J.V. Ros-Lis, Universitat de Valencia (UV)) and (GVA-THINKINAZUL/2021/027; principle investigators: C. Amaro and B. Fouz, Universitat de Valencia (UV)); PID2020-120619RB-I00 funded by MCIN/AEI/10.13039/501100011033 and CIAICO/2021/293 by "Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital" (GV, Spain). P. Ibanez received funds from the grant MRR-GVA Programa Investigo 2022.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Cage-enrichment: rabbit does prefer straw or a compressed wooden block

  • Rommers, Jorine M.
  • Bracke, Marc B.M.
  • Reuvekamp, Berry
  • Gunnink, Henk
  • de Jong, Ingrid C.
[EN] The effect of different food related materials on the behaviour of commercial meat rabbit does was investigated to provide them enrichment. Five different treatments were tested. Control (pens without additional enrichment, C) was compared with pens containing a pinewood stick (Pine), straw in a plastic bin (Straw), a compressed wooden block (Ply) or a combination of straw and a pinewood stick (Straw+Pine). The experiment was conducted on a commercial rabbit farm using 80 cages with multiparous lactating hybrid (Hycole) rabbit does. Behavioural observations were conducted in the first 4 wk of 2 successive lactations of 6 wk each, twice a week from 15:00 to 18:30 h. Once every week the consumption of gnawing materials and soiling of the cages was scored. More does were significantly occupied with Straw and Ply than with Pine (24±20, 11±9 and 4±3% of does, respectively) for a longer duration (4±4, 2±2, 0.1±0.2% of observed time, respectively). In does of Straw+Pine group, the pinewood was barely touched and straw was preferred. It can be concluded that straw (loose material) and wooden block are used by the animals as enrichment material to gnaw or chew on. The materials remain attractive for the 2 lactations which were measured. The pinewood stick as provided in this study was rarely used and it may be questioned whether it is sufficient as enrichment material or if it should be provided in another way than hanging on the roof of the cage. This study provides a first step towards a positive list of enrichment materials that can be used in commercial rabbit farming in The Netherlands., This research was funded by the Ministry of Economic Affairs, Agriculture and Innovation in the context of policy supporting research, project number BO-12.02-002 027 and a grant from the Product Board for Poultry and Eggs (PPE). Mr Melcher from Stemwede (D) kindly provided the pressed wooden blocks. We thank Messrs’ Wilms and Lavrijsen for their help during the experiment. We thank Mr and Mrs Slegh for their efforts and cooperation, so this experiment could be performed successfully on their farm. We thank Sander Lourens for his assistance in carrying out the behavioural observations.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enrichment of Rice Flour with Almond Bagasse Powder: The Impact on the Physicochemical and Functional Properties of Gluten-Free Bread

  • Duarte-Serna, Stevens
  • Sánchez-García, Janaina Madelein
  • Harasym, Joanna
  • Betoret Valls, Noelia|||0000-0002-3326-8797
[EN] Almond bagasse, a by-product of almond milk production, is rich in fibre, protein, polyunsaturated fatty acids, and bioactive compounds. Its incorporation into food products provides a sustainable approach to reducing food waste while improving nutritional quality. This study explored the impact of enriching rice flour with almond bagasse powders-either hot air-dried (HAD60) or lyophilised (LYO)-at substitution levels of 5%, 10%, 15%, 20%, 25%, and 30% (w/w), to assess effects on gluten-free bread quality. The resulting flour blends were analysed for their physicochemical, techno-functional, rheological, and antioxidant properties. Gluten-free breads were then prepared using these blends and evaluated fresh and after seven days of refrigerated storage. The addition of almond bagasse powders reduced moisture and water absorption capacities, while also darkening the bread colour, particularly in HAD60, due to browning from thermal drying. The LYO powder led to softer bread by disrupting the starch structure more than HAD60. All breads hardened after storage due to starch retrogradation. The incorporation of almond bagasse powder reduced the pasting behaviour-particularly at substitution levels of >= 25%-as well as the viscoelastic moduli of the flour blends, due to fibre competing for water and thereby limiting starch gelatinisation. Antioxidant capacity was significantly enhanced in HAD60 breads, particularly in the crust and at higher substitution levels, due to Maillard reactions. Furthermore, antioxidant degradation over time was less pronounced in formulations with higher substitution levels, with HAD60 proving more stable than LYO. Overall, almond bagasse powder improves the antioxidant profile and shelf-life of gluten-free bread, highlighting its value as a functional and sustainable ingredient., This research was funded by GV under the project referenced as CIAICO/2022/027. The authors would like to thank the Universitat Politècnica de València for funding the research (PAID-11-21 grant). Janaina Sanchez-García was a beneficiary of a master s degree scholarship funded by the Ecuadorian Government through the SENESCYT (contract CZ05-000716-2018). Also, Stevens Duarte Serna was a beneficiary of a grant in the PROM Programme International scholarship exchange of doctoral students and academic staff (hereinafter the Programme) with the Polish National Agency for Academic Exchange.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fast exact variable order affine projection algorithm

  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • de Diego Antón, María|||0000-0001-9948-3396
  • Piñero, Gema|||0000-0002-8719-8106
Variable order affine projection algorithms have been recently presented to be used when not only the convergence speed of the algorithm has to be adjusted but also its computational cost and its final residual error. These kind of affine projection (AP) algorithms improve the standard AP algorithm performance at steady state by reducing the residual mean square error. Furthermore these algorithms optimize computational cost by dynamically adjusting their projection order to convergence speed requirements. The main cost of the standard AP algorithm is due to the matrix inversion that appears in the coefficient update equation. Most efforts to decrease the computational cost of these algorithms have focused on the optimization of this matrix inversion. This paper deals with optimization of the computational cost of variable order AP algorithms by recursive calculation of the inverse signal matrix. Thus, a fast exact variable order AP algorithm is proposed. Exact iterative expressions to calculate the inverse matrix when the algorithm projection order either increases or decreases are incorporated into a variable order AP algorithm leading to a reduced complexity implementation. The simulation results show the proposed algorithm performs similarly to the variable order AP algorithms and it has a lower computational complexity. © 2012 Elsevier B.V. All rights reserved., Partially supported by TEC2009-13741, PROMETEO 2009/0013, GV/ 2010/027, ACOMP/2010/006 and UPV PAID-06-09.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Organic Light-Emitting Diodes Combining Thick Inorganic Perovskite Hole Transport Layers and Ultrathin Emitting Layers

  • Forzatti, Michele
  • Chin, Sang-Hyun
  • Sessolo, Michele
  • Tordera, Daniel
  • Bolink, Henk J.
  • Hernández Fenollosa, María De Los Ángeles|||0000-0001-8003-3651
[EN] Organic light-emitting diodes have a huge gain in popularity over the past 25 years for display and lighting applications, but the production of low-cost efficient devices remains a challenge. OLEDs using sub-nanometer undoped emissive layers are a route to fabricate cost-effective devices but, as they are inherently thin, it opens to issues with variation in thickness and shunting paths. At the same time, lead chloride perovskites are currently being investigated as charge transport materials in light-emitting devices owing to their wide bandgap, and remarkable high carrier mobility. In this work, for the first time, OLEDs that combine vacuum-processed thick cesium lead chloride perovskite hole transport layers with ultrathin Ir complex-based emissive layers are reported. Defects on the perovskite film are suppressed and the thickness of the emitting layer is optimized. Semitransparent devices are also fabricated with an average visible transmittance of over 50%. The results show extraordinarily thick devices (>1 mu m) with low turn-on voltage (3.3 V), high luminance (>15 000 cd m(-2)) and efficiencies (up to 54.1 cd A(-1)), and a negligible efficiency roll-off in the display applications luminance region., M.F. and S.-H.C. contributed equally to this work. The authors acknowledge financial support of the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant Agreement No. 834431) and by the European Union's Horizon 2021 research and innovation programme under grant agreement No. 101073045 (TADFsolutions). The authors also acknowledge financial support from the Comunitat Valenciana (CIGE/2021/027 and CISEJI/2022/43).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design, operation, and validation of metabolism crates for nutrition studies in alpacas (Vicugna pacos)

  • Vélez-Marroquín, V.M.
  • Cabezas-Garcia, E.H.
  • Antezana-Julian, W.
  • Franco, F.E.
  • Pinares-Patiño, C.S.
  • Estellés, F.|||0000-0001-6774-6075
[EN] Metabolism studies in farm animals require reliable measurements of feed intake and water consumption, as well as the accurate collection of feces and urine. When designing metabolism crates, aspects such as: animal behavior, minimization of injury risks, and animal cleanliness should be considered. In the present study, morphometric measures taken from 30 Huacaya male alpacas (five years old) were the basis for designing an initial prototype of metabolism crates, which was built largely of metal for strength and durability, and has replaceable parts. Two of these metabolism crates were built and tested with experimental animals sequentially allocated in pairs during five days each. Based on the observed performance, both length and width of metabolism crates were adjusted (2.00 x 0.55 m respectively) for an up-graded design, which was tested during the validation phase. These features provided greater comfort and ease of handling of the experimental animals. Metabolism crates are illustrated by photos and drawings, which give dimensions and details of construction. At the end, five units were built. Validation of metabolism crates comprised the evaluation of animal performance of five alpacas fed at maintenance level of intake in terms of: daily feed intake and water consumption, fecal and urine excretion, and diet digestibility over a two-week experimental period. Data were analyzed by descriptive statistics. Overall, both dry matter intake per kg of metabolic body weight (DMI: 42.7 & PLUSMN; 1.29 g/kg BW0.75), and water consumption (100 & PLUSMN; 7.1 ml/kg of BW0.75), which was equivalent to 2.3 times the observed DMI (kg/d), were in line with a number of previous studies conducted with alpacas for this feeding regime. Due to differences mainly related to diet composition, direct comparisons with studies in the literature in terms of fecal production and diet digestibility are difficult to draw. However, these results appear to be in line with expected performance for the given diet (70:30 oat hay and alfalfa pellets on a fed basis). Same applies to urine volume (428 & PLUSMN; 34.2 ml/ d), which in the present study represented 19% of the daily water consumption. It is concluded that proposed metabolism crates are suitable for conducting nutritional studies with alpacas., This work was supported by Universidad Nacional Mayor de San Marcos and the World Bank (Project No. 027-2019-Fondecyt-BM-INC. INV) . The authors acknowledge Mr. Yemi Sanca, Mr. Feliciano Rivera, and Mr. Raul Javier for their assistance with experimental routines. Thanks are also given to Mr. Edwin Flores for providing illustrations of metabolism crates and feces collection bags included in this paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Steady-state mean square performance of the multichannel filtered-X affine projection algorithm

  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
  • de Diego Antón, María|||0000-0001-9948-3396
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • Piñero, Gema|||0000-0002-8719-8106
This paper provides a unified analysis of the steady-state behavior of different multichannel filtered-x affine projection algorithms when used in active noise control (ANC) systems. The analysis deals with two different filtering schemes: the modified filtered-x affine projection (MFXAP) algorithm, with the modified filtered-x structure embedded, that has been studied in previous works, and the filtered-x affine projection (CFXAP) algorithm, with the conventional filtered-x structure embedded, that becomes the main contribution of this work. This study is based on energy conservation principles and does not require a specific signal distribution. The derived theoretical models allow to accurately predict the steady-state performance of the considered algorithms for moderate AP orders and low step sizes mu. Simulation results obtained in practical ANC systems validate both the analysis and the achieved expressions, showing a relative good match between theory and practice. © 2012 IEEE., This work was supported in part by PROMETEO/2009/013, CICYT grant TEC2009-13741, Generalitat Valenciana GV/2010/027, and the Universitat Politecnica de Valencia PAID-06-09.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Root-Soil Interactions for Pepper Accessions Grown under Organic and Conventional Farming

  • Morales-Manzo, Ivan I.
  • Ribes-Moya, Ana M.
  • Pérez-Moro, Clara
  • Pallotti Sagripanti, Claudia Gabriela|||0000-0002-5231-4285
  • Jiménez Belenguer, Ana Isabel|||0000-0002-3329-7221
  • Raigón Jiménez, Mª Dolores|||0000-0001-8055-2259
  • Rodríguez Burruezo, Adrián|||0000-0002-4530-8071
  • Fita, Ana|||0000-0002-8637-5852
[EN] Modern agriculture has boosted the production of food based on the use of pesticides and fertilizers and improved plant varieties. However, the impact of some such technologies is high and not sustainable in the long term. Although the importance of rhizospheres in final plant performance, nutrient cycling, and ecosystems is well recognized, there is still a lack of information on the interactions of their main players. In this paper, four accessions of pepper are studied at the rhizosphere and root level under two farming systems: organic and conventional. Variations in soil traits, such as induced respiration, enzymatic activities, microbial counts, and metabolism of nitrogen at the rhizosphere and bulk soil, as well as measures of root morphology and plant production, are presented. The results showed differences for the evaluated traits between organic and conventional management, both at the rhizosphere and bulk soil levels. Organic farming showed higher microbial counts, enzymatic activities, and nitrogen mobilization. Our results also showed how some genotypes, such as Serrano or Piquillo, modified the properties of the rhizospheres in a very genotype-dependent way. This specificity of the soil¿plant interaction should be considered for future breeding programs for soil-tailored agriculture., This research was partially funded by MCIN with funding of the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana, grant number: PRTR-C17.I1 AGROALNEXT/2022/027". IIMM work was supported by CONACYT-CONCYTEP pre-doctoral scholarship number 47274 by the Mexican government.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Analisis del grado de consistencia entre diferentes modos de evaluar las competencias transversales de creatividad, pensamiento crítico, liderazgo y trabajo en equipo/red

  • Marin-Garcia, Juan A.|||0000-0001-5416-3938
  • Maheut, Julien|||0000-0002-5796-9053
  • García Sabater, Julio Juan|||0000-0001-9449-1709
[EN] In this paper, we analyze three different ways of qualifying soft skills in a Master course with 21 students. Both the holistic qualification of the 4 competences together and the analytical qualification in paired comparison present an excellent degree of agreement. However, the analytical qualification based on the qualification of exercises and tasks, despite reproduce quite well the order of the qualifications with respect to the judgment of the expert (teacher) has very different absolute values that indicate that the grades are concentrated and do not adequately represent the differences in the competences between the students, [ES] En este trabajo analizamos tres modos diferentes de calificar las competenciastransversales en una asignatura de Máster con 21 alumnos. Tanto lacalificación holística de las 4 competencias juntas, como la calificaciónanalítica usando comparación pareada presentan un excelente grado deacuerdo. Sin embargo, la calificación analítica basada en calificación deejercicios y tareas, pese a respetar el orden de las calificaciones respecto aljuicio del experto (profesor) tiene unos valores absolutos muy dispares queindican que las notas se concentran y no representa adecuadamente lasdiferencias en cuanto a competencias entre los alumnos., Este trabajo ha sido parcialmente financiado por la Universitat Politécnica de Valencia (PIME/2016/A/027/A) “La evaluación pareada como metodología para la evaluación del pensamiento crítico de los alumnos”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparison of different ways of computing grades in continuous assessment into the final grade, Comparación del efecto de diferentes modosde agregar las calificaciones de evaluación continua en la nota final

  • Marin-Garcia, Juan A.|||0000-0001-5416-3938
  • Maheut, Julien|||0000-0002-5796-9053
  • Garcia Sabater, Julio J.
[EN] We present the results of comparing various ways of calculating students' final grades from continuous assessment grades. Traditionally the weighted arithmetic mean has been used and we compare this method with other alternatives: arithmetic mean, geometric mean, harmonic mean and multiplication of the percentage of overcoming of each activi-ty. Our objective is to verify, if any of the alternative methods, agree with the student’s performance proposed by the teacher of the subject, further discriminating the grade be-tween high and low learning outcomes and reducing the number of approved opportunists., Este trabajo ha sido parcialmente financiado por la Universitat Politécnica de Valencia (PIME/2016/A/027/A) “La evaluación pareada como metodología para la evaluación del pensamiento crí- tico de los alumnos”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multichannel massive audio processing for a generalized crosstalk cancellation and equalization application using GPUs

  • Belloch Rodríguez, José Antonio
  • Gonzalez, Alberto|||0000-0002-6984-3212
  • Martínez Zaldívar, Francisco José|||0000-0002-7845-6273
  • Vidal Maciá, Antonio Manuel
[EN] Multichannel acoustic signal processing has undergone major development in recent years due to the increased com- plexity of current audio processing applications, which involves the processing of multiple sources, channels, or filters. A gen- eral scenario that appears in this context is the immersive reproduction of binaural audio without the use of headphones, which requires the use of a crosstalk canceler. However, generalized crosstalk cancellation and equalization (GCCE) requires high com- puting capacity, which is a considerable limitation for real-time applications. This paper discusses the design and implementation of all the processing blocks of a multichannel convolution on a GPU for real-time applications. To this end, a very efficient fil- tering method using specific data structures is proposed, which takes advantage of overlap-save filtering and filter fragmentation. It has been shown that, for a real-time application with 22 inputs and 64 outputs, the system is capable of managing 1408 filters of 2048 coefficients with a latency time less than 6 ms. The proposed GPU implementation can be easily adapted to any acoustic environment, demonstrating the validity of these co-processors for managing intensive multichannel audio applications., This work has been partially funded by Spanish Ministerio de Ciencia e Innovacion TEC2009-13741, Generalitat Valenciana PROMETEO 2009/2013 and GV/2010/027, and Universitat Politecnica de Valencia through Programa de Apoyo a la Investigacion y Desarrollo (PAID-05-11).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Percepción social de los SUDS: Lecciones aprendidas y recomendaciones para involucrar a todos los actores implicados

  • Calcerrada, Elena
  • Valls Donderis, Pablo
  • Castillo-Rodríguez, J.T.
  • Andrés-Doménech, Ignacio|||0000-0003-4237-4863
[ES] En los últimos años se ha puesto de manifiesto la necesidad de promover una gestión sostenible y eficiente del agua de lluvia en las ciudades, con el objetivo de mejorar la gestión de las escorrentías, así como potenciar la implementación de soluciones que sirvan de soporte a la adaptación y mitigación frente al cambio climático. Los Sistemas Urbanos de Drenaje Sostenible (SUDS) han demostrado ser soluciones innovadoras y eficaces para alcanzar dicho objetivo. Sin embargo, su adecuado diseño, construcción y mantenimiento requiere de la participación de todos los agentes implicados en la gestión del ciclo urbano del agua. El presente artículo pone de manifiesto dicha necesidad y plantea recomendaciones al respecto a partir de las lecciones aprendidas de cuatro casos de estudio llevados a cabo a escalas nacional, regional, municipal y distrito, [EN] In recent years, the need to promote sustainable and efficient stormwater management in cities has arisen with the aim of improving runoff management, as well as boosting the implementation of solutions to support climate change adaptation and mitigation. Sustainable Urban Drainage Systems (SUDS) have proven to be innovative and effective solutions to achieve this goal. However, its proper design, construction and maintenance require the participation of all actors involved in the urban water cycle management. This article highlights this need and provides recommendations based on lessons learned from four case studies carried out at national, regional, municipal and district levels., Los autores agradecen la participación y colaboración de los múltiples actores que han formado parte de las distintas acciones descritas en el presente artículo, con especial mención a los proyectos E2 STORMED (Programa MED, 2013-2015), CoSUDS (Climate-KIC, 2016), ViaSuDS (Generalitat Valenciana, AEST/2016/027) y LIFE CERSUDS (Programa LIFE 2014-2020 de Medio Ambiente y Acción por el Clima de la Unión Europea, LIFE15 CCA/ ES/000091)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Retinal Image Synthesis and Semi-supervised Learning for Glaucoma Assessment

  • Díaz-Pinto, Andrés Yesid
  • Xu, Yanwu
  • Frangi, Alejandro F.
  • Colomer, Adrián|||0000-0002-7616-6029
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
  • Morales, Sandra|||0000-0003-0763-1545
[EN] Recent works show that Generative Adversarial Networks (GANs) can be successfully applied to image synthesis and semi-supervised learning, where, given a small labelled database and a large unlabelled database, the goal is to train a powerful classifier. In this paper, we trained a retinal image synthesizer and a semi-supervised learning method for automatic glaucoma assessment using an adversarial model on a small glaucoma-labelled and large unlabelled database. Various studies have shown that glaucoma can be monitored by analyzing the optic disc and its surroundings, for that reason the images used in this work were automatically cropped around the optic disc. The novelty of this work is to propose a new retinal image synthesizer and a semi-supervised learning method for glaucoma assessment based on the Deep Convolutional Generative Adversarial Networks (DCGAN). In addition, and to the best of the authors' knowledge, this system is trained on an unprecedented number of publicly available images (86926 images). This system, hence, is not only able to generate images synthetically but to provide labels automatically. Synthetic images were qualitatively evaluated using t-SNE plots of features associated with the images and their anatomical consistency were estimated by measuring the proportion of pixels corresponding to the anatomical structures around the optic disc. The resulting image synthesizer is able to generate realistic (cropped) retinal images and, subsequently, the glaucoma classifier is able to classify them into glaucomatous and normal with high accuracy (AUC=0.9017). The obtained retinal image synthesizer and the glaucoma classifier could be used then to generate an unlimited number of cropped retinal images with glaucoma labels., This work was supported by the Project GALAHAD [H2020-ICT-2016-2017, 732613]. In particular, thework of Andres Diaz-Pinto has been supported by the Generalitat Valenciana under the scholarship Santiago Grisolía [GRISOLIA/2015/027]. The work of Adrián Colomer has been supported by the Spanish Government under a FPI Grant [BES-2014-067889].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Microstructure, mechanical, and thermogravimetric characterization of cellulosic by-products obtained from biomass seeds

  • E. Rayón|||0000-0002-0653-2046
  • Ferrándiz Bou, Santiago|||0000-0001-7137-9298
  • López-Martínez, Juan|||0000-0001-6904-2282
  • Rico Beneito, María Isabel
  • ARRIETA, Marina Patricia
The microstructural, thermal, and nanomechanical characterization of biomass by-products coming from the food industry were studied. Scanning electron microscopy showed a microstructure formed by polygonal grains. The thermal behavior of seeds, evaluated by thermogravimetric analysis, revealed three main components (hemicellulose, cellulose, and lignin). Walnut shell showed the highest thermal stability and also the highest amount of lignin. The nanomechanical aspects were evaluated by nanoindentation. Samples with higher amount of cellulose presented minor modulus values. In accordance with the thermal stability, the highest modulus and hardness were observed in walnut. These by-products could be useful as reinforcement materials for biodegradable plastic industry., This work has been supported by the Spanish Ministry of Science and Innovation (MAT2011-28468-C02-02) and the Autonomous Government of Valencia (Spain) through the research program Geronimo Forteza (62/2010, 9 de Junio DOCV no 6291). M.P. Arrieta is granted by Santiago Grisolia program (GRISOLIA/2011/007).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Semilocal Convergence of the Extension of Chun&apos, s Method

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Martínez Molada, Eulalia|||0000-0003-2869-4334
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Maimó, Javier G.
  • Vassileva, Maria P.
[EN] In this work, we use the technique of recurrence relations to prove the semilocal convergence in Banach spaces of the multidimensional extension of Chun's iterative method. This is an iterative method of fourth order, that can be transferred to the multivariable case by using the divided difference operator. We obtain the domain of existence and uniqueness by taking a suitable starting point and imposing a Lipschitz condition to the first Frechet derivative in the whole domain. Moreover, we apply the theoretical results obtained to a nonlinear integral equation of Hammerstein type, showing the applicability of our results., This research was supported by PGC2018-095896-B-C22 (MCIU/AEI/FEDER, UE) and FONDOCYT 027-2018 Republica Dominicana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Green Public Procurement at a Regional Level. Case Study: The Valencia Region of Spain

  • Fuentes Bargues, José Luis|||0000-0003-4877-3291
  • Ferrer-Gisbert, Pablo-S.|||0000-0001-6609-2081
  • González-Cruz, María-Carmen|||0000-0002-6987-5732
  • Maria-José Bastante-Ceca|||0000-0001-5557-1335
[EN] Research on current practices and the state of green public procurement enables the identification of areas that can be improved, as well as opportunities to improve the tendering procedures from an environmental point of view. To understand the behaviour of local, provincial, and regional administrations concerning green public procurement, a case study on the Valencia region of Spain is made. The Valencian region is one of the most important communities in terms of population, number of contracting authorities, and weight in the Spanish Gross Domestic Product. In this study, a total of 967 procedures were analysed from calls for tenders made by municipal, provincial, and regional administrations in2016 and 2017.The results of this study show that the use of environmental criteria is 19.7% and the average weight is 4.1 out of 100. The civil engineering subsector, more than the building subsector, employs environmental criteria, particularly in projects tendered by regional administrations, whereas for projects with large budgets the level of use is similar for both subsectors. It is necessary to encourage plans to improve Green Public Procurement (GPP) practices in the Valencian administrations, especially those with a local scope such as municipalities., This research was funded by the Conselleria de Educacion, Investigacion, Cultura y Deporte of the Generalitat Valenciana through the project Analysis of the Green Public Procurement (CPV) of Works in the Valencian Community and Development of Indicators for their evaluation, grant number [GV/2017/027] of the R + D + i Projects for Emerging Research Groups 2017.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sarcocornia fruticosa, a Potential Candidate for Saline Agriculture: Antioxidant Levels in Relation to Environmental Conditions in the Eastern Iberian Peninsula

  • Ortega-Albero, Neus|||0000-0002-5989-4841
  • Boscaiu, Monica|||0000-0002-9691-4223
  • Fita, Ana|||0000-0002-8637-5852
  • Vallejo, Sara
  • Luput, Ioan
  • Donat-Torres, Maria P.
  • González-Orenga, Sara
[EN] Sustainable crop production requires an innovative approach due to increasing soil salinisation and decreasing freshwater availability. One promising strategy is the domestication of naturally salt-tolerant plant species with commercial potential. Sarcocornia fruticosa is a highly salt-tolerant halophyte, common in Mediterranean marshes, which may hold promise for biosaline agriculture. This study included 11 populations of this species spread over the territory of the Valencian Community in eastern Spain. Climatic data for each locality were obtained from the nearest meteorological stations. Soil analyses included texture, pH, electroconductivity, organic carbon and organic matter. Biochemical analyses on wild-sampled plant material focused on antioxidant compounds, such as carotenoids, phenolics, flavonoids and proline with malondialdehyde (MDA) used as a marker of oxidative stress. All variables (climatic, edaphic and biochemical) were evaluated together using Principal Component Analysis and Spearman correlation. The results obtained indicated some climatic differences in terms of mean annual precipitation, with a clear N-S gradient and considerable edaphic variability. However, none of the environmental conditions showed a clear correlation with plant biochemical characteristics. Significant differences in the levels of phenolic compounds, flavonoids and MDA between populations were probably due to genetic factors and cannot be explained as a response to environmental conditions., This research was funded by AGROALNEXT/2022/027 grant from Conselleria d Innovació, Universitats, Ciència i Societat Digital (Generalitat Valenciana, Spain) and MCIN, NextGeneration EU Funds (PRTR-C17.I1).
Repositori Institucional UIB
Publication Artículo científico (JournalArticle)

Depth-dependent temperature shifts and their impact on zooxanthellae dynamics and physiological stress in 'Anemonia sulcata'

  • Cohen-Sánchez, Amanda
  • Compa, Montserrat
  • Quetglas-Llabrés, Maria Magdalena
  • Araujo, Olaia
  • Tejada, Silvia
  • Gil, Lorenzo
  • Pinya, Samuel
  • Sureda, Antoni
[eng] Warming seas represent a major threat: rising baseline temperatures and increasing frequency and intensity of marine heatwaves intensify physiological stress in marine organisms. In symbiotic cnidarians, thermal stress can disrupt the host-symbiont balance by enhancing reactive oxygen species production, potentially leading to oxidative damage and bleaching. Depth can further modulate thermal exposure, as shallow habitats experience greater temperature variability and light intensity than deeper zones. The aim was to assess the effects of depth-dependent temperature shifts in 'Anemonia sulcata' by sampling individuals at 0.2 and 1.5 m depth monthly from June to September 2024, with an additional sampling in November. Zooxanthellae density, chlorophyll a and c concentrations, antioxidant enzymes (catalase, superoxide dismutase, glutathione peroxidase, glutathione reductase), and lipid peroxidation biomarker (malondialdehyde) were quantified. Discrete monthly temperatures did not differ significantly between depths; however, 24-h temperature records in July and August revealed diel peaks up to ~31.1 °C in shallow habitats, approximately 2 °C higher than in deeper sites. Zooxanthellae density and chlorophyll a and c concentrations increased during the warmest months (August–September), particularly in shallow anemones. Catalase and glutathione peroxidase activities, together with malondialdehyde levels, were elevated in shallow individuals during July–September, whereas superoxide dismutase and glutathione reductase remained comparatively stable. These patterns indicate enhanced photosynthetic activity accompanied by increased oxidative stress in shallow habitats. In conclusion, although 'A. sulcata' appears capable of short-term photoacclimation, the concurrent rise in lipid peroxidation suggests that antioxidant defences may become insufficient under repeated or prolonged warming, potentially preceding bleaching events.
DAU Arxiu Digital de la Universitat Ramon Llull
Publication Artículo científico (JournalArticle)

Vertical and oblique ionospheric soundings performance comparison over the 12,760 km transequatorial HF link between Antarctica and Spain

  • Alsina-Pagès, Rosa Ma
  • Hervás, Marcos
  • Altadill Felip, David
  • Calduch Casas, Jordi
  • Blanch Llosa, Estefania
This paper presents the second part of the study of the oblique sounding of a 12,760 km transequatorial ionospheric link between Livingston Island (Antarctica) and Cambrils in Spain. The study consists of the comparison among the oblique sounding results using an inverted V as receiver antenna, the International Telecommunication Union Rec533 HF prediction model, and the vertical sounding results on the path of the long haul channel. The data were collected the last consecutive surveys, when the inverted V antenna was operative (2010–2011, 2011–2012, 2012–2013, and 2013–2014). The ionospheric channel is studied in terms of frequency availability depending on time using the measurements of an oblique incidence sounder (OIS) and also measurements of several vertical incidence sounding stations (VIS) on the path of the long haul channel. The results obtained show similarities between the VIS and the OIS measurements; following previous studies preliminary results, the experiments conducted led us to think that the frequency of large availability can be estimated depending on the VIS sounding results.
DAU Arxiu Digital de la Universitat Ramon Llull
Publication Artículo científico (JournalArticle)

Vertical and oblique ionospheric soundings performance comparison over the 12,760 km transequatorial HF link between Antarctica and Spain

  • Alsina-Pagès, Rosa Ma
  • Hervás, Marcos
  • Altadill Felip, David
  • Calduch Casas, Jordi
  • Blanch Llosa, Estefania
This paper presents the second part of the study of the oblique sounding of a 12,760 km transequatorial ionospheric link between Livingston Island (Antarctica) and Cambrils in Spain. The study consists of the comparison among the oblique sounding results using an inverted V as receiver antenna, the International Telecommunication Union Rec533 HF prediction model, and the vertical sounding results on the path of the long haul channel. The data were collected the last consecutive surveys, when the inverted V antenna was operative (2010–2011, 2011–2012, 2012–2013, and 2013–2014). The ionospheric channel is studied in terms of frequency availability depending on time using the measurements of an oblique incidence sounder (OIS) and also measurements of several vertical incidence sounding stations (VIS) on the path of the long haul channel. The results obtained show similarities between the VIS and the OIS measurements; following previous studies preliminary results, the experiments conducted led us to think that the frequency of large availability can be estimated depending on the VIS sounding results.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Pioneering easy-to-use forestry data with Forest Explorer

  • Vega-Gorgojo, Guillermo
  • Giménez-Garciá, José M.
  • Ordóñez, Cristóbal
  • Bravo, Felipe
  • Schlieder, Christoph
16 Pàg., This work has been partially funded by the European Commission through Cross-Forest (2017-EU-IA-0140) and Spanish Ministry of Science and Innovation through REFORM (PCIN-2017-027, ERANET SUMFOREST) projects. The authors would like to thank the reviewers for their constructive and insightful comments that helped to improve this paper, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tree diversity reduces pine infestation by mistletoe

  • van Halder, Inge
  • Castagneyrol, Bastien
  • Ordóñez, Cristóbal
  • Bravo, Felipe
  • Río, Miren del
  • Perrot, Lucile
  • Jactel, Hervé
8 Pág, The pattern that a given tree species suffers less damage when growing with heterospecific neighbors than amongst conspecific plants, i.e. associational resistance, is common for insect herbivores and many fungal pathogens. However, associational resistance to parasitic plants has never been tested in a replicated study. Using paired forest plots, we investigated whether tree diversity triggered associational resistance to a tree parasite, the European mistletoe Viscum album ssp. austriacum, by comparing pure stands of Scots pine (Pinus sylvestris) with mixtures of Scots pine and Maritime pine (Pinus pinaster) in northern Spain. Maritime pine, with 1.2% of trees being infested, was considered a non-host species in the study area. The infestation level of Scots pines was significantly higher in pure plots (45.1%) than in mixed plots of Scots pines and Maritime pines (25.4%). Our study is the first to quantify associational resistance to a plant parasite in mixed vs. pure forest stands and suggests that mechanisms proposed to explain associational resistance to insects and pathogens also apply to plant parasites. Scots pine trees that were taller than the surrounding trees had a higher infestation probability, in both pure and mixed stands. Scots pine trees growing in mixtures were slightly lower than Maritime pines, suggesting that associational resistance was partly driven by reduced relative tree height. However, the effect of plot type (pure vs. mixed) remained significant after the effect of tree height was accounted for, thus indicating that other factors also contributed to lower mistletoe infestation in mixed plots. In particular, the behavior of birds dispersing mistletoe seeds might differ in mixed vs. pure stands., This work was supported by the Spanish Ministry of Economy and Competitiveness (projects PCIN-2017-026 and PCIN-2017-027) and the French National Research Agency (ANR-16-SUMF-0003-01) by funding the national contribution to the Sumforest ERA-net project REFORM (Resilience of Forest Mixtures)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Molluscan systematics: historical perspectives and the way ahead

  • Xu, Biyang
  • Kong, Lingfeng
  • Sun, Jin
  • Zhang, Junlong
  • Zhang, Yang
  • Song, Hao
  • Li, Qi
  • Uribe, Juan E.
  • Halanych, Kenneth M.
  • Cai, Chenyang
  • Dong, Yun‐Wei
  • Wang, Shi
  • Li, Yuanning
Mollusca, the second-most diverse animal phylum, is estimated to have over 100,000 living species with great genetic and phenotypic diversity, a rich fossil record, and a considerable evolutionary significance. Early work on molluscan systematics was grounded in morphological and anatomical studies. With the transition from oligo gene Sanger sequencing to cutting-edge genomic sequencing technologies, molecular data has been increasingly utilised, providing abundant information for reconstructing the molluscan phylogenetic tree. However, relationships among and within most major lineages of Mollusca have long been contentious, often due to limited genetic markers, insufficient taxon sampling and phylogenetic conflict. Fortunately, remarkable progress in molluscan systematics has been made in recent years, which has shed light on how major molluscan groups have evolved. In this review of molluscan systematics, we first synthesise the current understanding of the molluscan Tree of Life at higher taxonomic levels. We then discuss how micromolluscs, which have adult individuals with a body size smaller than 5 mm, offer unique insights into Mollusca's vast diversity and deep phylogeny. Despite recent advancements, our knowledge of molluscan systematics and phylogeny still needs refinement. Further advancements in molluscan systematics will arise from integrating comprehensive data sets, including genome-scale data, exceptional fossils, and digital morphological data (including internal structures). Enhanced access to these data sets, combined with increased collaboration among morphologists, palaeontologists, evolutionary developmental biologists, and molecular phylogeneticists, will significantly advance this field., National Natural Science Foundation of China; National Key Research and Development Program (China); Natural Science Foundation of Shandong Province; Fundamental Research Funds for the Central Universities (China)
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Contribución de congreso (ConferenceOutput)

Evaluating Subcritical Water Extraction for Red Algae Residue Valorization: Chemical Composition and Biological Activity

  • Trigueros Andrés, Ester
  • Oliveira, Andreia P.
  • Andrade, Paula B.
  • Videira, Romeu A.
  • Guedes de Pinho, Paula
  • Moreira, Rute
  • Sanz Díez, Mª Teresa
  • Beltrán Calvo, Sagrario
Trabajo presentado en: XXVII Encontro Luso Galego de Química, 22-24 de novembro 2023, Porto (Portugal)., Spanish Ministerio de Ciencia e Innovación and Junta de Castilla y León and ERDF for the grants PDC2022-133443-I00 and BU027P23, respectively
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Degradation kinetics of sugars (glucose and xylose), amino acids (proline and aspartic acid) and their binary mixtures in subcritical water: Effect of Maillard reaction

  • Alonso Riaño, Patricia
  • Illera Gigante, Alba Ester
  • Benito Román, Oscar
  • Melgosa Gómez, Rodrigo
  • Bermejo-López, A.
  • Beltrán Calvo, Sagrario
  • Sanz Díez, Mª Teresa
A systematic kinetic study was conducted in subcritical water medium in the temperature range from 150 to 200 °C for pure glucose, xylose, proline and aspartic acid as well as binary mixtures of sugars + amino acids to understand the reaction kinetics and interactions among biomass components and to discern the influence of Maillard reaction (MR) on the overall reaction kinetics. The main degradation products identified for glucose and xylose were the respective dehydration products, hydroxymethyl furfural and furfural, yielding an increasing solid residue with temperature (15.9 wt% at 200 °C) with an augmented heating value. The degradation of sugars and amino acids in binary systems was faster compared to pure compounds due to MR and the production of dehydration products was delayed when considering total sugar conversion. Higher relative reactivity in MR was observed for xylose over glucose showing also higher antioxidant activity., This work was supported by the Agencia Estatal de Investigación [grant numbers PID2022-136385OB-I00, PID2020-116716RJ-I00, TED2021-129311B-I00, PDC2022-133443-I00] and the Junta de Castilla y León (JCyL) and the European Regional Development Fund (ERDF) [grant number BU027P23]. Benito Román post-doctoral contract was funded by AEI through project PID2020–116716RJ-I00. P. Alonso-Riaño was funded by JCyL and the European Social Fund (ESF) by ORDEN EDU/556/2019. R. Melgosa contract was funded by a Beatriz Galindo Research Fellowship [BG20/00182]. A. E. Illera and A. Bermejo-López postdoctoral contracts were funded by TED2021-129311B-I00 and Margarita Salas grant [MARSA22/03], respectively.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Contribución de congreso (ConferenceOutput)

Corn stover biorefinery based on hydrothermal and membrane processes

  • Candela Gil, Helena
  • Illera Gigante, Alba Ester
  • Barea Gómez, Pedro
  • Beltrán Calvo, Sagrario
  • Sanz Díez, Mª Teresa
Trabajo presentado en: EIFS2024, 3er Encuentro Ibérico de Fluidos Supercríticos = Third Iberian Meeting on Supercritical Fluids = 3º Encontro Ibérico de Fluidos Supercríticos, 22-24 de julio, Ourense, Spain., Corn stover, a widely available agricultural by-product, stands out for its chemical composition rich in cellulose, hemicellulose and lignin. These components make it an ideal candidate for valorization in the context of the circular economy, offering a promising opportunity to reduce the use of fossil fuels and promote sustainable practices in the agri-food industry. In this study, various strategies based on green technologies were explored to maximize the potential of corn stover. An integral approach was chosen, focusing on obtaining secondgeneration chemicals, such as furfural and ethanol, through innovative and sustainable processes. First, pressurized green fluids, specifically water under subcritical conditions, were used to hydrolyse the structural components of the biomass. A mild treatment with subcritical water at a temperature of 180 °C and a pressure of 50 bar was carried out for 3 h, allowing the hydrolysis of the hemicelluloses present in the biomass and the generation of a celluloseenriched solid. During this process, CrCl 3.6 H2O was used as catalyst, a Lewis acid that facilitates the conversion of the released C5 sugars, xylose and arabinose, into furfural. Furfural production yields of 31 % were achieved under the conditions employed, demonstrating the effectiveness of this strategy for obtaining this compound. Subsequently, the cellulose-enriched solid was subjected to enzymatic hydrolysis mediated by Celluclast 1.5 L cocktail, releasing the glucose monomers present in the biomass. The resulting enzymatic hydrolisate was used as a substrate for an alcoholic fermentation catalysed by Ethanol Red®, achieving very attractive values for industrial bioethanol production, with a yield of 91.4%. For the recovery of furfural and ethanol, the pervaporation technique was used as a membrane separation method [1]. A silicone membrane was used to selectively recover furfural and bioethanol. Firstly, the temperature and the bioproduct concentration in the feed as well as the selectivity of the membrane in the presence of other intermediates formed during treatments were optimised. The silicone membrane was selective towards furfural and ethanol with enrichment factors in the range [10.3 – 31.7] and [3.8 – 9.1], respectively. This way, furfural produced by hydrothermal catalytic process was completely recovered in the permeate stream. On the other hand, ethanol obtained from enzymatic hydrolysis + fermentation of the cellulose rich solid phase was recovered with a yield of 60 % (see Figure 1). In summary, this study proves that it is possible to achieve an integral utilisation of corn stover through the production of high-value products such as furfural and ethanol, using green and sustainable technologies. These results not only offer a green and competitive alternative in industrial terms, but also contribute to boosting the circular economy and reducing the environmental impact of the agri-food industry., This work was supported by the Agencia Estatal de Investigación [grant numbers PID2022-136385OB-I00, TED2021-129311B-I00, PDC2022-133443-I00] and the Junta de Castilla y León (JCyL) and the European Regional Development Fund (ERDF) [grant number BU027P23]. A. E. Illera postdoctoral contract was funded by JCyL by BU027P23. R. Melgosa contract was funded by a Beatriz Galindo Research Fellowship [BG20/00182. H. Candela Gil contract was funded by TED2021-129311BI00. P. Barea predoctoral contract was funded by JCyL and the European Social Fund (ESF) by ORDEN EDU/1868/2022, de 19 de diciembre.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Contribución de congreso (ConferenceOutput)

Cascade approach to valorize soybean by-product by using subcritical water. First step: bioactive compounds

  • Barea Gómez, Pedro
  • Melgosa Gómez, Rodrigo
  • Illera Gigante, Alba Ester
  • Candela Gil, Helena
  • Beltrán Calvo, Sagrario
  • Sanz Díez, Mª Teresa
Trabajo presentado en: EIFS2024, 3er Encuentro Ibérico de Fluidos Supercríticos = Third Iberian Meeting on Supercritical Fluids = 3º Encontro Ibérico de Fluidos Supercríticos, 22-24 de julio, Ourense, Spain., Okara is the soybean by-product generated in the production of soymilk, tofu, and soy protein isolate, at the filtration stage. It’s quite expensive to dry it (necessary for its conservation), so it is generally discarded; however, its nutritional value makes it very interesting. It presents fiber, protein, good amino acid profile, healthy lipids and great isoflavone content; being these last compounds particularly noteworthy.[1, 2] Subcritical water (subW) was the green technology selected as the main hydrolytic agent in this study, focusing on the isoflavone fraction. OKW extracts were subjected to independent subW extractions in six assays from 110 °C to 180 °C, using N2 to pressurize up to 5 MPa, for 5 h,in a batch reactor of 0.5 L capacity. It was analyzed total isoflavone content at different treatment times for each selected temperature. 8 isoflavones (daidzein, genistein, glycitein and its derivates) and the difference in extraction of its malonyl forms, β-glucosides and aglycones, were analyzed. Different assays were carried out on OKW (oven-dried washed okara) and best conditions were applied posteriorly to OKA (okara as received without pretreatment). Total isoflavone extraction (Fig. 1) and antioxidant capacity were analyzed in all of these kinetics. At low temperatures (lower than 140 °C), there was observed a maximum in the extraction of isoflavones, being the highest at 120 ° C, after 30 min of treatment (27.8 μg/mL; 585.6 μg/g OKW). On the contrary, at the highest temperatures essayed, 160 and 180 °C, there was observed a continuous decrease due toits degradation at these temperatures. Opposite kinetics were found for antioxidant capacity, where the highest temperatures (mainly 160 and 180 °C) report highest results, although lower isoflavone content was determined. This could be attributed to Maillard reaction between other compounds release at those temperatures (such as reducing sugars and amino groups). Focusing on isoflavone extraction, 120 °C was selected to treat OKA (as received, with a humidity content of 82.5 %). At 35 min, it was reported 1229.2 μg isoflavones /g OKA, being 210 % higher than using OKW. The study of the composition of the isoflavones chemical forms was also carried out (Fig. 2), showing how malonylglucosides decrease losing their malonyl group and forming βglucosides, that increase even faster, due to the high hydrolizing power of subW; at the same time, aglycones increase slowly without showing high content in any moment. Other novel extraction technologies were applied to OKA, Microwave (895.2 μg /g OKA) and ultrasound extraction (927.5 μg /g OKA), reporting high values of total isoflavone extraction, but lower results (72.8 % and 75.4 %, respectively) than subW (Fig. 3). Besides, subW results present higher ratio βglucoside/malonylglucoside, being the first more noteworthy. As a way to reach an integral valorisation of this by-product, additional subW hydrolysis can be carried out on the solid residue after subW at 120 °C, with the isoflavones from OKA already extracted. Higher temperatures on subW will lead to valorize structural components of the okara such as carbohydrates and valuable proteins that cannot be hydrolyzed at the isoflavone extraction optimum conditions., This work was supported by the Agencia Estatal de Investigación [grant numbers PID2022-136385OB-I00, TED2021-129311B- I00, PDC2022-133443-I00] and the Junta de Castilla y León (JCyL) and the European Regional Development Fund (ERDF) [grant number BU027P23]. A. E. Illera postdoctoral contract was funded by JCyL by BU027P23. R. Melgosa contract was funded by a Beatriz Galindo Research Fellowship [BG20/00182]. H. Candela Gil contract was funded by TED2021-129311BI00. P. Barea predoctoral contract was funded by JCyL and the European Social Fund (ESF) by ORDEN EDU/1868/2022, de 19 de diciembre.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Contribución de congreso (ConferenceOutput)

Evaluation of a green pressurized reaction media (subW-CO2) and pressurized microwave-assisted reaction for furfural production from corn stover and its derivatives sugars

  • Illera Gigante, Alba Ester
  • Candela Gil, Helena
  • Barea Gómez, Pedro
  • Bermejo-López, A.
  • Benito Román, Oscar
  • Melgosa Gómez, Rodrigo
  • Beltrán Calvo, Sagrario
  • Sanz Díez, Mª Teresa
Póster presentado en: EIFS2024, 3er Encuentro Ibérico de Fluidos Supercríticos = Third Iberian Meeting on Supercritical Fluids = 3º Encontro Ibérico de Fluidos Supercríticos, 22-24 de julio, Ourense, Spain., Corn stover is a highly produced agricultural waste worldwide, accounting with more than 1 billion tons per year [2]. Corn stover is a lignocellulosic biomass, so its main fractions are cellulose, hemicellulose and lignin. This composition makes of corn stover an ideal biomass for the production of value-added chemicals, highlighting in this work the production of furfural. Furfural (C5H4O2), is an aromatic aldehyde obtained by the hydrolysis of pentoses through their subsequent dehydration. It is a versatile chemical with many applications in the chemical, pharmaceutical or fuel industries. For its production from lignocellulosic biomass, the pentoses present in its hemicellulose fraction first need to be hydrolized into their monomeric form, and then follow their conversion into furfural. To increase furfural yield and selectivity in this reaction, different catalysts and organic solvents are usually added. These techniques are pollutant agents for the environment, and should be replaced. In this work, two green technologies were proposed for the production of furfural from xylose and corn stover. The first one was a green, organic solvent-free, subcritical water-CO2 (subW-CO2) system. Under subcritical conditions, the water acquires new properties, such as an increase of its ionic product, giving the water acidic and basic catalyst properties [3]. However, to optimize furfural production, CO2 was selected as the pressurizing agent due to its Brønsted acid effect after its dissolution in water as carbonic acid. Brønsted acids have shown to promote xylose and its isomers dehydration into furfural [4]. To further improve furfural production, the addition of CrCl3, which acts as Lewis acid, was tested. The results were promising, with no catalyst, a furfural yield of 41 % was obtained when treating xylose, showing the potential of the subW system itself for furfural generation. When adding CrCl3, the yield increased to 50 % after 1.7 hour treatment at 180 °C (Figure 1). Corn stover was treated under the same conditions, although in this case it only achieved a 25 % furfural yield. The second tested technology was a microwave system. In this case, xylose and corn stover with CrCl3 were added into the pressure vessels. The addition of the Lewis acid catalyst played a key role in MW treatments. When no catalyst was added, a maximum furfural yield of 8 % was reached after 25 minutes at 180 °C, while it was 30 % when CrCl3 was added, proving the effect that CO2, and therefore Brønsted acids present for furfural production. Corn stover also showed a much lower furfural yield in MW, achieving a 15 % after a 90 minutes treatment. Comparing both technologies at 180 °C (Figure 1), it is possible to observe how both xylose and corn stover show same furfural yield values between the two technologies at a fixed treatment time of 40 minutes. However, when time increases, furfural yield is further increased in the subW system samples in a greater extent than in the MW ones. After treating xylose and corn stover, side reactions took place, being the main byproducts lactic, acetic, and formic acids. The concentration of these byproducts was higher in the MW treated samples, highlighting lactic acid, which concentration was 10 times more in the MW assisted reaction than in the subW system in the case of xylose. Therefore, the selectivity towards furfural when treating xylose or lignocellulosic biomass was higher in the subW-CO2, and therefore, it can be concluded that the presence of a Brønsted acid, in this case carbonic acid produced from CO2, significantly affects to the selectivity of the reaction to furfural, and consequently, to its yield. Both green technologies proved to be promising alternatives for furfural production, making possible to stablish a starting point for the use of these techniques to produce furfural from lignocellulosic biomass., This work was supported by the Agencia Estatal de Investigación (AEI), Ministerio de Ciencia e Innovación (MICINN) and Next Generation UE [grant numbers PID2022136385OB-I00, PID2020-116716RJ-I00, TED2021-129311B-I00 and PDC2022-133443-I00] and the Junta de Castilla y León (JCyL) and the European Regional Development Fund (ERDF) [grant number BU027P23]. Benito- Román post-doctoral contract was funded by AEI through project PID2020–116716RJ-I00. R. Melgosa contract was funded by a Beatriz Galindo Research Fellowship [BG20/00182]. P. Barea predoctoral contract was funded by JCyL and the European Social Fund (ESF) by ORDEN EDU/1868/2022, de 19 de diciembre. H. Candela contract was funded by TED2021-129311BI00.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Contribución de congreso (ConferenceOutput)

Transformation of the polysaccharide fraction of corn stove into organic acids catalysed by Lewis acid catalyst in a subcritical water reaction medium

  • Candela Gil, Helena
  • Illera Gigante, Alba Ester
  • Barea Gómez, Pedro
  • Beltrán Calvo, Sagrario
  • Sanz Díez, Mª Teresa
Póster presentado en: EIFS2024, 3er Encuentro Ibérico de Fluidos Supercríticos = Third Iberian Meeting on Supercritical Fluids = 3º Encontro Ibérico de Fluidos Supercríticos, 22-24 de julio, Ourense, Spain., The transition from today’s fossil-based economy towards a more sustainable economy lays in the transformation of biomass resources into high-value-added chemicals. The potential of the polysaccharide fraction of the biomass to produce different chemical building blocks has been highligthted by the US Department of Energy. Among these building blocks, organic acids present a huge potential since they can be converted into a great variety of chemical compounds. The hydrolysis of the polysaccharide fraction of biomass, followed by sugar degradation, can result in the formation of different organic acids. Among them, in this study, production selectivity towards levulinic and lactic acid has been explored by using a mixture of Lewis acid catalysts. The chemical route for levulinic acid production is well known and it consists on the dehydration of glucose to HMF and further rehydration to produce levulinic and formic acids: On the contrary, conversion of cellulose into lactic involves mainly a reto-aldol condensation reaction pathway: In this work, a combination of Al3+ and Sn2+ chloride salts were explored to convert the polysaccharide fraction of corn stover in water under subcritical conditions as reaction medium. Two different temperatures were tried, 190 ºC and 220 ºC at a catalyst concentration of 20 % of equiweight fraction of both salts considering the glucan fraction of corn stover. Organic acid yields were evalauted in different ways. Lactic acid yield was evaluated considering the polysaccharide fraction of corn stover (cellulose + hemicellulose), but levulinic acid yield was determined considering only the celullose fraction. Previous studies with pure sugar monomers, glucose and xylose, showed that the xylose Al3+/Sn2+ catalyzed-system yielded lactic acid but no levulinic acid. On the contray, in case of glucose, both organic acids could be produced according to the above routes. These results encourage the use of corn stover as a source of valuable chemicals such as organic acids. Further studies should be performed for a deeper analysis in terms of the selectivity of the process., This work was supported by the Agencia Estatal de Investigación (AEI), Ministerio de Ciencia e Innovación (MICINN) and Next Generation UE [grant numbers PID2022136385OB-I00, PID2020-116716RJ-I00, TED2021-129311B-I00 and PDC2022-133443-I00] and the Junta de Castilla y León (JCyL) and the European Regional Development Fund (ERDF) [grant number BU027P23]. P. Barea predoctoral contract was funded by JCyL and the European Social Fund (ESF) by ORDEN EDU/1868/2022, de 19 de diciembre. H. Candela contract was funded by TED2021-129311BI00.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Contribución de congreso (ConferenceOutput)

Evaluation of subcritical water reaction media for an efficient conversion of the polysaccharide fraction to lactic acid by Ca(OH)2 catalysis

  • Candela Gil, Helena
  • Illera Gigante, Alba Ester
  • Barea Gómez, Pedro
  • Beltrán Calvo, Sagrario
  • Sanz Díez, Mª Teresa
Póster presentado en: EIFS2024, 3er Encuentro Ibérico de Fluidos Supercríticos = Third Iberian Meeting on Supercritical Fluids = 3º Encontro Ibérico de Fluidos Supercríticos, 22-24 de julio, Ourense, Spain., Lactic acid (LA) is an -hydroxy carboxylic acid with a chiral C at its  position. Due to the presence of two funcional groups, acid and alcohol, it presents an important chemical reactivity with a growing market in the food and pharmaceutical industries. Currently, there is gap between LA production capacity and the actual ouput due to problems associated with the up-scaling of the current industrial fermentation process from the glucose monomer1. The catalytic conversion of the polysaccharide fraction of second generation biomass into different platform chemicals offers a great potential for this biomass to be incorporated as raw material in the future biorefineries. Corn stover is a lignocellulosic biomass with an important polysaccharide fraction which makes of corn stover an ideal biomass for the production of value-added chemicals. In this work, production of LA from corn stover by alkaline catalysis has been explored by using Ca(OH)2 as catalyst in subcritical water reaciton medium. Two different temperatures were tried, 190 ºC and 220 ºC at a catalyst concentration of 0.1 M. Batch kinetics were determined in a lab-assambled reactor of 0.5 L capacity covered by a ceramic heating jacket (230 V, 4000 W, ø 95 mm, 160 mm height) to reach the selected working temperature. Corn stover was charged into the reactor at a concentration of 5 wt%. The potential of the main derived-sugars from the polysaccharide fraction of corn stover, glucose and xylose, to produce LA, was studied previous to the use of corn stover. Initial concentration of glucose and xylose was 50 mM and the reaction temperature 190 ºC. Figure 1 shows the glucose and xylose conversion as a function of reaction time. Both monomeric sugars degrade rapidly in an alkaline environment, especially when compared to the conversion rate achieved in a subcritical water reaction medium without the addition of any type of external catalyst2. The presence of key intermediates such as glyceraldehyde in the reaction medium proves that bases, such as Ca(OH)2, catalyze the retro-aldol condensation sugar degradation pathway leading to the formation of lactic acid from glucose or xylose. Furfural and HMF were no detected in significant amount in the reaction medium since it is well known that Brønsted acids are needed to catalyze the dehydration of glucose and xylose to produce HMF and furfural, respectively. The presence of retro-aldol condensation compounds leads to the formation of lactic acid as the main reaction product, with slightly higher yields on a carbon basis for xylose, 41 %, than for glucose, 37 %. In any case, the concentration of LA in the medium was similar for both sugars (3.1-3.2 g/L). Other reaction by products determined in the reaction medium were acetic and formic acids. LA production was studied by alkaline catalysis (0.1 M Ca(OH)2) by using corn stover as raw material at 190 ºC. LA yield was determined considering the polysaccharide fraction in the corn stover as potential source of lactic acid (42.1 % glucans, 25.8 % xylanes and 4.6 % arabinans). A substantial decrease in LA yield was observed for corn stover compared to the yield derived from the pure monomers (see Figure 1) with maximum yields of 5.4 % and LA concentration in the reaction medium of 2.2 g/L. To explore a potential improvement of LA yield with temperature, treatment was also conducted at 225 ºC, resulting in a maximum yield of 13.5 %, corresponding to a LA concentration of 5.5 g/L. A more in-depth study needs to be conducted to achieve higher yields by improving the previously required hydrolysis step of the polysaccharide fraction of corn stover into its monomers., This work was supported by the Agencia Estatal de Investigación (AEI), Ministerio de Ciencia e Innovación (MICINN) and Next Generation UE [grant numbers PID2022136385OB-I00, TED2021-129311B-I00 and PDC2022-133443-I00] and the Junta de Castilla y León (JCyL) and the European Regional Development Fund (ERDF) [grant number BU027P23]. P. Barea predoctoral contract was funded by JCyL and the European Social Fund (ESF) by ORDEN EDU/1868/2022, de 19 de diciembre. H. Candela contract was funded by TED2021-129311BI00.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Fractionation and refining of pectic oligosaccharides derived from onion skins through continuous feed diafiltration

  • Ruiz Pérez, María Olga
  • Benito Román, Oscar
  • Beltrán Calvo, Sagrario
  • Sanz Díez, Mª Teresa
In this work, a diafiltration-based process was investigated for the recovery of pectic oligosaccharides produced by subcritical water hydrolysis from onion skin waste. Four tubular ceramic membranes from 100 to 1 kDa were selected based on the molecular weight of the different galacturonic acid species present in the onion skin hydrolysate. All these membranes showed high selectivity towards pectic oligosaccharides, with low retention for free galacturonic acid, monosaccharides, organic acids, and other impurities. The 50 and 100 kDa membranes completely retained pectic oligosaccharides with a molecular weight exceeding 80 kDa, accounting for approximately 30 % of the initial pectic oligosaccharides in the hydrolysate. However, the purification rate was significantly slower using the 50 kDa membrane due to the increased cake layer resistance. Furthermore, it was examined a fractionation/purification cascade involving sequential diafiltration stages using 100, 10, and 1 kDa membranes at 25 °C, TMP = 1 bar, and a crossflow velocity of 1.5 m s−1. Approximately 87 % of the initial pectic oligosaccharides were successfully recovered and purified in the retentates, highlighting their potential for diverse applications due to their narrow molecular weight distribution, while phenolic compounds and other valuable low molecular weight molecules were recovered in the final permeate., This work was supported by the Agencia Estatal de Investigación [grant numbers PID2020-116716RJ-I00 , PDC2022-133443-I00 , PID2022-136385OB-I00 ] and the Junta de Castilla y León (JCyL) and the European Regional Development Fund (ERDF) [grant number BU027P23 ]. Benito Román post-doctoral contract was funded by the Agencia Estatal de Investigación through project PID2020–116716RJ-I00 .
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Contribución de congreso (ConferenceOutput)

Development of an integrated extraction and purification process for the recovery of high-value compounds from onion peels

  • Benito Román, Oscar
  • Candela Gil, Helena
  • Illera Gigante, Alba Ester
  • Melgosa Gómez, Rodrigo
  • Barea Gómez, Pedro
  • Ruiz Pérez, María Olga
  • Beltrán Calvo, Sagrario
Comunicación oral presentada en: 5th Ibero-American Congress on Biorefineries (5-CIAB). October 2-4, 2024, Jaén (Spain), This work was supported by the Spanish Research Agency (AEI) [grant numbers PID2020-116716RJ-I00, TED2021-129311B-I00] and the Junta de Castilla y León (JCyL) and the European Regional Development Fund (ERDF) [grant number BU027P23]. R. Melgosa contract was funded by a Beatriz Galindo Research Fellowship [BG20/00182]. P. Barea predoctoral contract was funded by JCyL and the European Social Fund (ESF) [ORDEN EDU/1868/2022, de 19 de diciembre.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Contribución de congreso (ConferenceOutput)

Study of the synergistic effect of a green pressurized reaction media (subW-CO2) with homogeneous and heterogeneous catalysts for furfural production from sugar-derived biomass

  • Illera Gigante, Alba Ester
  • Candela Gil, Helena
  • Bermejo-López, A.
  • Barea Gómez, Pedro
  • Benito Román, Oscar
  • Melgosa Gómez, Rodrigo
  • Beltrán Calvo, Sagrario
  • Sanz Díez, Mª Teresa
Comunicación oral presentada en: 5th Ibero-American Congress on Biorefineries (5-CIAB). October 2-4, 2024, Jaén (Spain), This work was supported by the Spanish Research Agency (AEI) [grant numbers PID2022-136385OB-I00, PID2020-116716RJ-I00, TED2021-129311B-I00, PDC2022-133443-I00] and the Junta de Castilla y León (JCyL) and the European Regional Development Fund (ERDF) [grant number BU027P23]
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Contribución de congreso (ConferenceOutput)

Valorization of corn stover to obtain biochemicals by hydrothermal and membrane processes: furfural and ethanol

  • Candela Gil, Helena
  • Illera Gigante, Alba Ester
  • Barea Gómez, Pedro
  • Beltrán Calvo, Sagrario
  • Sanz Díez, Mª Teresa
Comunicación oral flash presentada en: 5th Ibero-American Congress on Biorefineries (5-CIAB). October 2-4, 2024, Jaén (Spain), This work was supported by the Spanish Research Agency (AEI) [grant numbers PID2022-136385OB-I00, TED2021-129311B-I00, PDC2022-133443-I00] and the Junta de Castilla y León (JCyL) and the European Regional Development Fund (ERDF) [grant number BU027P23].
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Contribución de congreso (ConferenceOutput)

Cascade approach to valorize okara by using.subcritical water to obtain bioactive compounds

  • Barea Gómez, Pedro
  • Illera Gigante, Alba Ester
  • Candela Gil, Helena
  • Melgosa Gómez, Rodrigo
  • Beltrán Calvo, Sagrario
  • Sanz Díez, Mª Teresa
Póster presentado en: 5th Ibero-American Congress on Biorefineries (5-CIAB). October 2-4, 2024, Jaén (Spain), This work was supported by the Agencia Estatal de Investigación [grant numbers PID2022-136385OB-I00, TED2021-129311B-I00, PDC2022-133443-I00] and the Junta de Castilla y León (JCyL) and the European Regional Development Fund (ERDF) [grant number BU027P23]. A. E. Illera postdoctoral contract was funded by JCyL by BU027P23. R. Melgosa contract was funded by a Beatriz Galindo Research Fellowship [BG20/00182]. H. Candela Gil contract was funded by TED2021-129311BI00. P. Barea predoctoral contract was funded by JCyL and the European Social Fund (ESF) by ORDEN EDU/1868/2022, de 19 de diciembre.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Contribución de congreso (ConferenceOutput)

Conversion of the polysaccharide fraction of corn stover to lactic acid by alkaline catalysis in subcritical water

  • Sanz Díez, Mª Teresa
  • Candela Gil, Helena
  • Illera Gigante, Alba Ester
  • Melgosa Gómez, Rodrigo
  • Beltrán Calvo, Sagrario
  • Benito Román, Oscar
  • Barea Gómez, Pedro
Póster presentado en: 5th Ibero-American Congress on Biorefineries (5-CIAB). October 2-4, 2024, Jaén (Spain), This work was supported by the Spanish Research Agency (AEI) [grant numbers PID2022-136385OB-I00, PID2020-116716RJ-I00, TED2021-129311B-I00, PDC2022-133443-I00] and the Junta de Castilla y León (JCyL) and the European Regional Development Fund (ERDF) [grant number BU027P23]. A. E. Illera postdoctoral contract was funded by JCyL through BU027P23. R. Melgosa contract was funded by a Beatriz Galindo Research Fellowship [BG20/00182]. Benito Román post-doctoral contract was funded by AEI through project PID2020–116716RJ-I00. H. Candela Gil contract was funded by TED2021-129311BI00. P. Barea predoctoral contract was funded by JCyL and the European Social Fund (ESF) [ORDEN EDU/1868/2022, de 19 de diciembre]
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Contribución de congreso (ConferenceOutput)

Catalytic hydrothermal conversion of lignocellulosic biomass to valued-added organic acid

  • Beltrán Calvo, Sagrario
  • Candela Gil, Helena
  • Illera Gigante, Alba Ester
  • Melgosa Gómez, Rodrigo
  • Benito Román, Oscar
  • Barea Gómez, Pedro
  • Sanz Díez, Mª Teresa
Póster presentado en: 5th Ibero-American Congress on Biorefineries (5-CIAB). October 2-4, 2024, Jaén (Spain), This work was supported by the Spanish Research Agency (AEI) [grant numbers PID2022-136385OB-I00, PID2020-116716RJ-I00, TED2021-129311B-I00, PDC2022-133443-I00] and the Junta de Castilla y León (JCyL) and the European Regional Development Fund (ERDF) [grant number BU027P23]. A. E. Illera postdoctoral contract was funded by JCyL through BU027P23. R. Melgosa contract was funded by a Beatriz Galindo Research Fellowship [BG20/00182]. Benito Román post-doctoral contract was funded by AEI through project PID2020–116716RJ-I00. H. Candela Gil contract was funded by TED2021-129311BI00. P. Barea predoctoral contract was funded by JCyL and the European Social Fund (ESF) [ORDEN EDU/1868/2022, de 19 de diciembre].
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Kinetics of extraction and degradation of pectin derived compounds from onion skin wastes in subcritical water

  • Benito Román, Oscar
  • Melgosa Gómez, Rodrigo
  • Illera Gigante, Alba Ester
  • Sanz Díez, Mª Teresa
  • Beltrán Calvo, Sagrario
In this work the valorization of onion skin wastes (OSW) as a source of the pectic oligosaccharides (POS), prebiotic hydrocolloids, using subcritical water (SubW) was thoroughly studied and modeled (using the Panchev's model) in a batch extractor at temperatures up to 165 °C and extraction times up to 180 min. The extraction of pectin derived compounds was notably sensitive to both variables, with the most favorable extraction rates occurring within a severity factor (logR0) range of 2.8–3.1. The highest recovery, 32 g of OGalA per 100 g of raw material, was achieved at 135 °C for 100 min. This process yielded various families of compounds categorized by their weight average molecular weight (Mw), with 85 kDa being the most prevalent, followed by 27, 17, and 7 kDa. The changes in Mw as a function of time and temperature was modeled using the Emsley equation, which enabled the prediction of POS molecular weight based on extraction conditions, as well as the calculation of the energy of activation for pectin derived compounds degradation (116 ± 2 kJ/mol). Additionally, along with the loss in molecular weight, the presence of degradation products such as formic acid and furfural increased with the intensity of the extraction conditions. In summary, the hydrothermal extraction conducted at temperatures between 125 and 135 °C facilitated the retrieval of POS with MW ranging from 7 to 85 kDa. This stands in contrast to the high MW (>300 kDa) and linear pectin obtained through conventional acid-water extraction processes., This work was supported by the Agencia Estatal de Investigación (AEI) though projects PID2020-116716RJ-I00/AEI/10.13039/501100011033, PID2022-136385OB-I00/AEI/10.13039/501100011033 and TED2021-129311B-I00. Ó. Benito-Román's post-doctoral contract was funded by AEI through project PID2020-116716RJ-I00. R. Melgosa's contract was funded by a Beatriz Galindo Research Fellowship [BG20/00182]; A.E. Illera's post-doctoral contract was funded by Junta de Castilla y León and ERDF through project BU027P23.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Research data Set de datos (Dataset)

Dataset of the work "VALPECTIN_Research Article_JMS_708_August 2024_123054"

  • Ruiz Pérez, María Olga
  • Benito Román, Oscar
  • Sanz Díez, Mª Teresa
  • Beltrán Calvo, Sagrario
The dataset contains data used in the work "Fractionation and refining of pectic oligosaccharides derived from onion skins through continuous feed diafiltration", published in Journal of Membrane Science 708, 2024, 123054, This work was supported by the Agencia Estatal de Investigación [grant numbers PID2020-116716RJ-I00, PDC2022-133443-I00, PID2022-136385OB-I00] and the Junta de Castilla y León (JCyL) and the European Regional Development Fund (ERDF) [grant number BU027P23]. Benito Román post-doctoral contract was funded by the Agencia Estatal de Investigación through project PID2020–116716RJ-I00.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Long-range vortex transfer in superconducting nanowires

  • Córdoba, Rosa
  • Orús, Pablo
  • Jelic, Željk L.
  • Sesé, Javier
  • Ibarra, Manuel Ricardo
  • Guillamón, Isabel
  • Vieira, Sebastián
  • Palacios, Juan José
  • Suderow, Hermann
  • Milosevic, Milorad V.
  • De Teresa, José María
Under high-enough values of perpendicularly-applied magnetic field and current, a type-II superconductor presents a finite resistance caused by the vortex motion driven by the Lorentz force. To recover the dissipation-free conduction state, strategies for minimizing vortex motion have been intensely studied in the last decades. However, the non-local vortex motion, arising in areas depleted of current, has been scarcely investigated despite its potential application for logic devices. Here, we propose a route to transfer vortices carried by non-local motion through long distances (up to 10 micrometers) in 50 nm-wide superconducting WC nanowires grown by Ga+ Focused Ion Beam Induced Deposition. A giant non-local electrical resistance of 36 O has been measured at 2 K in 3 µm-long nanowires, which is 40 times higher than signals reported for wider wires of other superconductors. This giant effect is accounted for by the existence of a strong edge confinement potential that hampers transversal vortex displacements, allowing the long-range coherent displacement of a single vortex row along the superconducting channel. Experimental results are in good agreement with numerical simulations of vortex dynamics based on the time-dependent Ginzburg-Landau equations. Our results pave the way for future developments on information technologies built upon single vortex manipulation in nano-superconductors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Ultra-fast direct growth of metallic micro- and nano-structures by focused ion beam irradiation

  • Córdoba, Rosa
  • Orús, Pablo
  • Strohauer, Stefan
  • Torres, Teobaldo E.
  • De Teresa, José María
An ultra-fast method to directly grow metallic micro- and nano-structures is introduced. It relies on a Focused Ion Beam (FIB) and a condensed layer of suitable precursor material formed on the substrate under cryogenic conditions. The technique implies cooling the substrate below the condensation temperature of the gaseous precursor material, subsequently irradiating with ions according to the wanted pattern, and posteriorly heating the substrate above the condensation temperature. Here, using W(CO)6 as the precursor material, a Ga+ FIB, and a substrate temperature of -100 °C, W-C metallic layers and nanowires with resolution down to 38 nm have been grown by Cryogenic Focused Ion Beam Induced Deposition (Cryo-FIBID). The most important advantages of Cryo-FIBID are the fast growth rate (about 600 times higher than conventional FIBID with the precursor material in gas phase) and the low ion irradiation dose required (~50 µC/cm2), which gives rise to very low Ga concentrations in the grown material and in the substrate (=0.2%). Electrical measurements indicate that W-C layers and nanowires grown by Cryo-FIBID exhibit metallic resistivity. These features pave the way for the use of Cryo-FIBID in various applications in micro- and nano-lithography such as circuit editing, photomask repair, hard masks, and the growth of nanowires and contacts. As a proof of concept, we show the use of Cryo-FIBID to grow metallic contacts on a Pt-C nanowire and investigate its transport properties. The contacts have been grown in less than one minute, which is considerably faster than the time needed to grow the same contacts with conventional FIBID, around 10 hours.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

3D superconducting hollow nanowires with tailored diameters grown by focused He+ beam direct writing

  • Cordoba, R.
  • Ibarra, A.
  • Mailly, D.
  • Guillamon, I.
  • Suderow, H.
  • De Teresa, J.M.
Currently, the patterning of innovative three-dimensional (3D) nano-objects is required for the development of future advanced electronic components. Helium ion microscopy in combination with a precursor gas can be used for direct writing of three-dimensional nanostructures with a precise control of their geometry, and a significantly higher aspect ratio than other additive manufacturing technologies. We report here on the deposition of 3D hollow tungsten carbide nanowires with tailored diameters by tuning two key growth parameters, namely current and dose of the ion beam. Our results show the control of geometry in 3D hollow nanowires, with outer and inner diameters ranging from 36 to 142 nm and from 5 to 28 nm, respectively; and lengths from 0.5 to 8.9 mu m. Transmission electron microscopy experiments indicate that the nanowires have a microstructure of large grains with a crystalline structure compatible with the face-centered cubic WC1-x phase. In addition, 3D electron tomographic reconstructions show that the hollow center of the nanowires is present along the whole nanowire length. Moreover, these nanowires become superconducting at 6.8 K and show high values of critical magnetic field and critical current density. Consequently, these 3D nano-objects could be implemented as components in the next generation of electronics, such as nano-antennas and sensors, based on 3D superconducting architectures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Influence of material and haptic design on the mechanical stability of intraocular lenses by means of finite-element modeling

  • Remón, L.
  • Siedlecki, D.
  • Cabeza-Gil, I.
  • Calvo, B.
Intraocular lenses (IOLs) are used in the cataract treatment for surgical replacement of the opacified crystalline lens. Before being implanted they have to pass the strict quality control to guarantee a good biomechanical stability inside the capsular bag, avoiding the rotation, and to provide a good optical quality. The goal of this study was to investigate the influence of the material and haptic design on the behavior of the IOLs under dynamic compression condition. For this purpose, the strain-stress characteristics of the hydrophobic and hydrophilic materials were estimated experimentally. Next, these data were used as the input for a finite-element model (FEM) to analyze the stability of different IOL haptic designs, according to the procedure described by the ISO standards. Finally, the simulations of the effect of IOL tilt and decentration on the optical performance were performed in an eye model using a ray-tracing software. The results suggest the major importance of the haptic design rather than the material on the postoperative behavior of an IOL. FEM appears to be a powerful tool for numerical studies of the biomechanical properties of IOLs and it allows one to help in the design phase to the manufacturers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Three-Dimensional Superconducting Nanohelices Grown by He+-Focused-Ion-Beam Direct Writing

  • Córdoba, R.
  • Mailly, D.
  • Rezaev, R.O.
  • Smirnova, E.I.
  • Schmidt, O.G.
  • Fomin, V.M.
  • Zeitler, U.
  • Guillamón, I.
  • Suderow, H.
  • De Teresa, J.M.
Novel schemes based on the design of complex three-dimensional (3D) nanoscale architectures are required for the development of the next generation of advanced electronic components. He+ focused-ion-beam (FIB) microscopy in combination with a precursor gas allows one to fabricate 3D nanostructures with an extreme resolution and a considerably higher aspect ratio than FIB-based methods, such as Ga+ FIB-induced deposition, or other additive manufacturing technologies. In this work, we report the fabrication of 3D tungsten carbide nanohelices with on-demand geometries via controlling key deposition parameters. Our results show the smallest and highest-densely packed nanohelix ever fabricated so far, with dimensions of 100 nm in diameter and aspect ratio up to 65. These nanohelices become superconducting at 7 K and show a large critical magnetic field and critical current density. In addition, given its helical 3D geometry, fingerprints of vortex and phase-slip patterns are experimentally identified and supported by numerical simulations based on the time-dependent Ginzburg-Landau equation. These results can be understood by the helical geometry that induces specific superconducting properties and paves the way for future electronic components, such as sensors, energy storage elements, and nanoantennas, based on 3D compact nanosuperconductors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Predictive score for advanced colorectal neoplasia based on cardiovascular and colorectal cancer risk factors

  • Ruiz-Belmonte, Lara M.
  • Carrera-Lasfuentes, Patricia
  • Cebollada-Solanas, Alberto
  • Scarpignato, Carmelo
  • Lanas, Ángel
  • Gargallo-Puyuelo, Carla J.
Background and Aims: Cardiovascular disease and colorectal cancer (CRC) are significant health problems and share some risk factors. The aim of our study was to develop and validate a predictive score for advanced colorectal neoplasia (CRN) based on risk factors for cardiovascular disease and CRC. Materials and Methods: A cross-sectional study comprising a derivation cohort and an external validation cohort of 1049 and 308 patients, respectively. A prediction score for advanced CRN (CRNAS: Colorectal Neoplasia Advanced Score) was developed from a logistic regression model, comprising sex, age, first-degree family history for CRC, systolic and diastolic blood pressure, total cholesterol, HDL cholesterol, body mass index, diabetes, smoking, and antihypertensive treatment. Other cardiovascular risk scores (Framingham–Wilson, REGICOR, SCORE, and FRESCO) were also used to predict the risk of advanced CRN. The discriminatory capacity of each score was evaluated using the area under the curve (AUC). Results: CRN were found in 379 subjects from the derivation cohort (36%), including 228 patients (22%) with an advanced CRN. Male sex, age, diabetes, and smoking were identified as independent risk factors for advanced CRN. The newly created score (CRNAS) showed an AUC of 0.68 (95% CI: 0.64–0.73) for advanced CRN, which was better than cardiovascular risk scores (p < 0.001). In the validation cohort, the AUC of CRNAS for advanced CRN was 0.67 (95% CI: 0.57–0.76). Conclusions: The newly validated CRNAS has a better discriminatory capacity to predict advanced CRN than cardiovascular scores. It may be useful for selecting candidates for screening colonoscopy, especially in those with cardiovascular risk factors.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Towards scalable data discovery

  • Flores Herrera, Javier de Jesús
  • Nadal Francesch, Sergi
  • Romero Moral, Óscar
We study the problem of discovering joinable datasets at scale. We approach the problem from a learning perspective relying on profiles. These are succinct representations that capture the underlying characteristics of the schemata and data values of datasets, which can be efficiently extracted in a distributed and parallel fashion. Profiles are then compared, to predict the quality of a join operation among a pair of attributes from different datasets. In contrast to the state-of-the-art, we define a novel notion of join quality that relies on a metric considering both the containment and cardinality proportion between join candidate attributes. We implement our approach in a system called NextiaJD, and present experiments to show the predictive performance and computational efficiency of our method. Our experiments show that NextiaJD obtains similar predictive performance to that of hash-based methods, yet we are able to scale-up to larger volumes of data. Also, NextiaJD generates a considerably less amount of false positives, which is a desirable feature at scale., This work is partly supported by Barcelona’s City Council under grant agreement 20S08704. Javier Flores is supported by contract 2020-DI-027 of the Industrial Doctorate Program of the Government of Catalonia and Consejo Nacional de Ciencia y Tecnología (CONACYT, Mexico)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Effective and scalable data discovery with NextiaJD

  • Flores Herrera, Javier de Jesús
  • Nadal Francesch, Sergi
  • Romero Moral, Óscar
We present NextiaJD, a data discovery system with high predictive performance and computational efficiency. NextiaJD aids data scientists in the discovery of datasets that can be crossed. To that end, it proposes a ranking of candidate pairs according to their join quality, which is based on a novel similarity measure that considers both containment and cardinality pro- portions between candidate attributes. To do so, NextiaJD adopts a learning approach relying on profiles. These are succint and informative representations of the schemata and data values of datasets that capture their underlying characteristics. NextiaJD's features are fully integrated into Apache Spark and benefits from it to parallelize the profiling and discovery processes. The on-site demonstration will showcase how NextiaJD can effectively support large-scale data discovery tasks with a large set of datasets the audience will be able to play with., This work is partly supported by Barcelona’s City Council under grant agreement 20S08704. Javier Flores is supported by contract 2020-DI-027 of the Industrial Doctorate Program of the Government of Catalonia and Consejo Nacional de Ciencia y Tecnología (CONACYT, Mexico)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

On the impact of correlated sampling processes in WSNs with energy-neutral operation

  • Matamoros, Javier
  • Calvo-Fullana, Miguel
  • Antón-Haro, Carles
© 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In this paper, we consider a communication scenario where multiple EH sensor nodes collect correlated measurements of an underlying random field. The nodes operate in an energy-neutral manner (i.e. energy is used as soon as it is harvested) and, hence, the energy-harvesting and sampling processes at the sensor nodes become inter-twined, random and spatially correlated. Under some mild assumptions, we derive the multidimensional linear filter which minimizes the mean square error in the reconstructed measurements at the Fusion Center (FC). We also analyze the impact of correlated and random sampling processes in the resulting distortion and, in order to gain some insight, we particularize the analysis to the case of fully correlated spatial fields and with an asymptotically large number of sensor nodes., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Competitive design of energy harvesting communications in wireless fading channels

  • Gómez-Vilardebò, Jesus
© 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper considers the design of online transmission policies for slotted energy harvesting point-to-point communications systems in wireless fading channels. The objective is to minimize the competitive rate gap that is defined as the maximum gap between the optimal rates that can be achieved by the offline, and online transmission policies over all possible energy arrival profiles, and fading states. The paper introduces the competitive rate gap analysis, and solves the particular case of two transmission slots. For two time slots, we show that the optimal competitive rate gap is 0.2075 bits/s/Hz, and present a transmission policy that achieves it. The new online policy is shown to outperform previously proposed online policies, such as the myopic policy., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Vertical and oblique ionospheric soundings performance comparison over the 12,760 km transequatorial HF link between Antarctica and Spain

  • Alsina-Pagès, Rosa Ma
  • Hervás, Marcos
  • Altadill Felip, David
  • Calduch Casas, Jordi
  • Blanch Llosa, Estefania
This paper presents the second part of the study of the oblique sounding of a 12,760 km transequatorial ionospheric link between Livingston Island (Antarctica) and Cambrils in Spain. The study consists of the comparison among the oblique sounding results using an inverted V as receiver antenna, the International Telecommunication Union Rec533 HF prediction model, and the vertical sounding results on the path of the long haul channel. The data were collected the last consecutive surveys, when the inverted V antenna was operative (2010–2011, 2011–2012, 2012–2013, and 2013–2014). The ionospheric channel is studied in terms of frequency availability depending on time using the measurements of an oblique incidence sounder (OIS) and also measurements of several vertical incidence sounding stations (VIS) on the path of the long haul channel. The results obtained show similarities between the VIS and the OIS measurements; following previous studies preliminary results, the experiments conducted led us to think that the frequency of large availability can be estimated depending on the VIS sounding results.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Routing in accumulative multi-hop networks

  • Gómez-Vilardebò, Jesús
© 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper investigates the problem of finding optimal paths in single-source single-destination accumulative multi-hop networks. We consider a single source that communicates to a single destination assisted by several relays through multiple-hops. At each hop, only one node transmits, while the rest of nodes receive the transmitted signal, and store it after processing/decoding and mixing with the signals received in previous hops. This is, we consider that terminals make use of advanced energy accumulation transmission/reception techniques such us maximal ratio combining reception of repetition codes, or information accumulation with rateless codes. Accumulative techniques increase communication reliability, reduce energy consumption, and decrease latency. We investigate the properties that a routing metric must satisfy in these accumulative networks to guarantee that optimal paths can be computed with Dijkstra's algorithm. We model the problem of routing in an accumulative multi-hop networks, as the problem of routing in a hypergraph. We show that optimality properties in traditional multi-hop network (monotonicity and isotonicity) are no longer valid and derive a new set of sufficient conditions for optimality., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Vertical and oblique ionospheric soundings performance comparison over the 12,760 km transequatorial HF link between Antarctica and Spain

  • Alsina-Pagès, Rosa Ma
  • Hervás, Marcos
  • Altadill Felip, David
  • Calduch Casas, Jordi
  • Blanch Llosa, Estefania
This paper presents the second part of the study of the oblique sounding of a 12,760 km transequatorial ionospheric link between Livingston Island (Antarctica) and Cambrils in Spain. The study consists of the comparison among the oblique sounding results using an inverted V as receiver antenna, the International Telecommunication Union Rec533 HF prediction model, and the vertical sounding results on the path of the long haul channel. The data were collected the last consecutive surveys, when the inverted V antenna was operative (2010–2011, 2011–2012, 2012–2013, and 2013–2014). The ionospheric channel is studied in terms of frequency availability depending on time using the measurements of an oblique incidence sounder (OIS) and also measurements of several vertical incidence sounding stations (VIS) on the path of the long haul channel. The results obtained show similarities between the VIS and the OIS measurements; following previous studies preliminary results, the experiments conducted led us to think that the frequency of large availability can be estimated depending on the VIS sounding results.
Docta Complutense
Publication Artículo científico (JournalArticle)

Neurobiological and endocrine correlates of individual differences in spatial learning ability

  • Merino Martín, José Joaquín
  • Sandi, Carmen
  • Cordero, M Isabel
  • Kruyt, Nyika D
  • Regan, Ciaran M
  • Murphy, Keith J
The polysialylated neural cell adhesion molecule (PSA-NCAM) has been implicated in activity-dependent synaptic remodeling and memory formation. Here, we questioned whether training-induced modulation of PSA-NCAM expression might be related to individual differences in spatial learning abilities. At 12 h posttraining, immunohistochemical analyses revealed a learning-induced up-regulation of PSA-NCAM in the hippocampal dentate gyrus that was related to the spatial learning abilities displayed by rats during training. Specifically, a positive correlation was found between latency to find the platform and subsequent activated PSA levels, indicating that greater induction of polysialylation was observed in rats with the slower acquisition curve. At posttraining times when no learning-associated activation of PSA was observed, no such correlation was found. Further experiments revealed that performance in the massed water maze training is related to a pattern of spatial learning and memory abilities, and to learning-related glucocorticoid responsiveness. Taken together, our findings suggest that the learning-related neural circuits of fast learners are better suited to solving the water maze task than those of slow learners, the latter relying more on structural reorganization to form memory, rather than the relatively economic mechanism of altering synaptic efficacy that is likely used by the former.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Mapping Chinese language pedagogy from 1966 to 2013, a bibliometric study of the Journal of Chinese Language Teachers Association

  • Casas-Tost, Helena|||0000-0002-4023-9070
  • Rovira-Esteva, Sara|||0000-0001-7647-6417
This article presents the results of a bibliometric study on the evolution of Chinese language pedagogy over the past five decades. It is based on the 745 articles published in the Journal of the Chinese Language Teachers Association( JCLTA) from 1966 to 2013. Taking the JCLTA as its corpus of study, this paper attempts to provide an overview of research on Chinese language pedagogy, both in quantitative and qualitative terms. Apart from offering a diachronic analysis of the object of study and research methods adopted by Chinese language teachers that brings us up to the current situation, this article identifies both the main focus of research and those areas that have been largely overlooked. It also provides a description of the geographical and social distribution of the articles, including statistics on the authors and institutions that offers a broad picture of the main actors engaged in this field. We believe our findings can help researchers and Chinese language teachers to reflect on the important issues in this area and search for possible future directions in research, 本文旨在分析最近五十年来汉语教学法的演变,并介绍我们 以此为目的所做的一项文献计量研究的成果。这项研究以《中文教 师学会学报》 1966 年至 2013 年间发表的 745 篇文章为基础,以该 刊物为研究主体,力求从质和量两个方面对汉语教学法研究的演变 提供一个全面而概括的描述。本文针对研究对象及各中文教师采用 的研究方法提供了一个历时性分析,由过去引入现状,以辨析其重 点研究范畴以及长期以来备受忽略的领域各有哪些。此外,本文描 述了相关作者的社会及地域分布情况,包括对作者及其所属机构的 数据统计,从而提供了一幅该领域内主要研究 人员的全景分布图。 相信我们的研究成果可以帮助相关研究人员及对外汉语老师,尤其 是同行新秀,反思该领域内最重要的问题,并探求潜在的未来研究 发展方向
Dipòsit Digital de Documents de la UAB
Publication Contribución de congreso (ConferenceOutput)

Attention and joint attention to ad stimuli. Study with eye tracker technology

  • Oliver Moreno, Andreu
  • Añaños, Elena|||0000-0002-9893-6848
La investigación plantea dar un paso más en el estudio de la atención dispensada a la publicidad a partir del estudio de la atención conjunta (Joint Atentttion), es decir aquella que implica, a través de la mirada, una atención coordinada de un individuo (protagonista del anuncio) con otro (espectador del anuncio) hacia un objeto (producto anunciado). Los resultados, permiten concluir la importancia de la utilización de situaciones de atención conjunta en los estímulos publicitarios para captar la atención del sujeto así como también la utilización de las tecnologías del neuromarketing para este tipo de investigaciones.
Dipòsit Digital de Documents de la UAB
Publication Contribución de congreso (ConferenceOutput)

Packaging or image? the interaction is better. Study with eye tracker technology, Packaging o imagen? mejor la interacción. Estudio realizado con la tecnología eye tracker

  • Añaños, Elena|||0000-0002-9893-6848
  • Oliver Moreno, Andreu
Este trabajo plantea dar un paso más en el estudio de la atención dispensada a la publicidad a partir del estudio de la atención conjunta (Joint Atentttion), es decir aquella que implica, a través de la mirada, una atención coordinada de un individuo (protagonista del anuncio) con otro (espectador del anuncio) hacia un objeto (producto anunciado). El objetivo del trabajo es estudiar la atención dispensada al producto publicitario en función de la existencia o no de atención conjunta dispensada hacia el producto.
Dipòsit Digital de Documents de la UAB
Publication Contribución de congreso (ConferenceOutput)

Designing a new platform for AD analyses, the VIW project