Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 35
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Emergence of hydrodynamic heat transport in semiconductors at the nanoscale

  • Torres Alvarez, Pol|||0000-0003-2544-5850
  • Ziabari, Amir Koushyar|||0000-0003-4776-457X
  • Torello Massana, Alvar|||0000-0002-4173-2529
  • Bafaluy, Javier|||0000-0003-1972-9339
  • Camacho, Juan|||0000-0002-8095-4167
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Shakouri, Ali
  • Alvarez, F. Xavier|||0000-0001-6746-2144
Several recent experiments have demonstrated the failure of the Fourier heat equation in semiconductors at the nanoscale. We show that a generalized heat transport equation including a hydrodynamic term can explain three of these experiments on a silicon substrate: heater lines experiments both in stationary and nonstationary settings and the nonstationary response in grating experiments. To this end, we solve the hydrodynamic heat equation either numerically or analytically. The non-Fourier response observed in those experimental situations can be easily explained in terms of hydrodynamic concepts, such as friction and vorticity. For instance, the experimentally observed increase of thermal boundary resistance as size decreases can be simply understood as an increase of friction. We conclude that, contrary to common belief, hydrodynamics is a fundamental ingredient of semiconductor heat transport in the nanoscale at room temperature, providing physical insight and a unifying framework on the observed non-Fourier response. The relations between hydrodynamic heat transport with phonon momentum conservation and the Boltzmann transport equation are also provided.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Hydrodynamic heat transport in compact and holey silicon thin films

  • Beardo, Albert|||0000-0003-1889-1588
  • Calvo Schwarzwälder, Marc|||0000-0003-4284-1898
  • Camacho, Juan|||0000-0002-8095-4167
  • Myers, T. G.|||0000-0001-7573-8059
  • Torres Alvarez, Pol|||0000-0003-2544-5850
  • Sendra Molins, Lluc|||0000-0001-8821-6831
  • Alvarez, F. Xavier|||0000-0001-6746-2144
  • Bafaluy, Javier|||0000-0003-1972-9339
A multiscale hydrodynamic-heat-transport model applicable to arbitrary geometries using finite-element methods is compared with the experimental effective thermal conductivity of silicon thin films and periodic holey membranes for different sizes and temperatures. The range of system length scales and temperatures in which the model predictions agree with experimental data is discussed and quantitatively determined. The model agrees with experimental results when the smallest system size is larger than twice the nonlocal length, an intrinsic property of the material that depends only on temperature. These results open the door to the use of the hydrodynamic equation instead of an effective Fourier model to interpret current heat-transport experimental data.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Gleason Grading of Histology Prostate Images through Semantic Segmentation via Residual U-Net

  • Kalapahar, Amartya
  • Silva-Rodríguez, Julio José
  • Colomer, Adrián|||0000-0002-7616-6029
  • López-Mir, Fernando|||0000-0001-8286-6796
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
[EN] Worldwide, prostate cancer is one of the main cancers affecting men. The final diagnosis of prostate cancer is based on the visual detection of Gleason patterns in prostate biopsy by pathologists. Computer-aided-diagnosis systems allow to delineate and classify the cancerous patterns in the tissue via computer-vision algorithms in order to support the physicians¿ task. The methodological core of this work is a U-Net convolutional neural network for image segmentation modified with residual blocks able to segment cancerous tissue according to the full Gleason system. This model outperforms other well-known architectures, and reaches a pixel-level Cohen¿s quadratic Kappa of 0.52, at the level of previous image-level works in the literature, but providing also a detailed localisation of the patterns., This work was supported by the Spanish Ministry of Economy and Competitiveness through project DPI2016-77869. The work of Fernando Lopez-Mir has been supported by the Polytechnic University of Valencia (Grant PAID-10-18). The Titan V used for this research was donated by the NVIDIA Corporation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multi-Level Characterization of Eggplant Accessions from Greek Islands and the Mainland Contributes to the Enhancement and Conservation of this Germplasm and Reveals a Large Diversity and Signatures of Differentiation between both Origins

  • Gramazio, Pietro|||0000-0003-2226-7999
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Chatziefstratiou, Eleni
  • Petropoulos, Constantinos
  • Chioti, Vasileia
  • Mylona, Photini
  • Kapotis, George
  • Papasotiropoulos, Vasileios
[EN] Crop landraces are found in many inhabited islands of Greece. Due to the particularity of environment and isolation from the mainland, Greek islands represent a natural laboratory for comparing the diversity of landraces from the islands with those of the Greek mainland. A collection of 36 Greek eggplant landraces and traditional cultivars from the mainland and the islands has been phenotypically and genetically characterized using 22 morphological descriptors and 5 SSR markers. The mineral composition (K, Mg, Cu, Fe, Mn, Zn) of fruits was also determined. The objectives of this study include the multi-level characterization of eggplant local landraces and the comparison of diversity among accessions from the Greek mainland and the islands. Characterization of eggplant landraces will contribute to the enhancement and prevention of genetic erosion in this local group and will provide a resource for future investigation and breeding. PCA analysis of morphological traits explained 45.4% of the total variance revealing the formation of two clusters, one with most of the island accessions, and another with most of the mainland ones. The SSR markers used exhibited high average values for the number of alleles/locus (4.6), expected heterozygosity (0.60) and PIC (0.55), while the observed heterozygosity was low (0.13). Both STRUCTURE and PCoA analyses based on SSR data revealed two genetic clusters, one made up mainly by the mainland accessions, while the other one was mainly made up by the island accessions. Although there was considerable variation among the landraces for the concentration of minerals studied, only average Mg concentration was significantly different between mainland and island accessions. Based on our data, the Greek eggplant landraces present considerable morphological and genetic diversity with some differentiation signatures between the island and the mainland accessions. Our results have implications for conservation of Greek landraces and suggest that Greece might be considered as part of a secondary center of diversity for eggplant in the Mediterranean basin., "PlantUP" (MIS 5002803) which is implemented under the Action "Reinforcement of the Research and Innovation Infrastructure", funded by the Operational Programme "Competitiveness, Entrepreneurship and Innovation" (NSRF 2014-2020) and co-financed by Greece and the European Union (European Regional Development Fund). Funding was also received from the European Union's Horizon 2020 Research and Innovation Programme under grant agreement No 677379 (G2P-SOL project: Linking genetic resources, genomes and phenotypes of Solanaceous crops), and from Ministerio de Ciencia, Innovacion y Universidades, Agencia Estatal de Investigacion and Fondo Europeo de Desarrollo Regional (grant RTI-2018-094592-B-100 from MCIU/AEI/FEDER, UE). Pietro Gramazio is grateful to Universitat Politecnica de Valencia and to Japan Society for the Promotion of Science for their respective postdoctoral grants (PAID-10-18 and FY2019 JSPS Postdoctoral Fellowship for Research in Japan [Standard]).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An analytical framework for the study of geographical places in the scientific literature, Marco analítico para el estudio de lugares geográficos en la literatura científica

  • Orduña-Malea, Enrique|||0000-0002-1989-8477
  • Miguel, Sandra
  • González, C.M.
  • Arias, R.R.
  • Ortiz-Jaureguizar, E.
[ES] La Cienciometría tradicionalmente ha examinado los lugares principalmente a través de las afiliaciones de las personas autoras, pasando por alto a menudo la utilización exhaustiva de datos geográficos dentro de publicaciones académicas para diseñar indicadores científicos. Este estudio presenta un marco integral para formalizar y unificar el análisis cienciométrico de lugares (SFBR), que comprende tres fases clave: identificación, descripción y medición de lugares. En este contexto, se presentan cinco dimensiones descriptivas y un conjunto de 57 métricas centrales para examinar aspectos relacionados con el lugar en la literatura científica. Estas métricas abarcan parámetros a nivel de autor, de publicación y de lugar, y quedan categorizadas según la sección donde se encuentra la información geográfica (afiliación autoría citante, el cuerpo del texto y afiliación de la autoría citada). El SFBR sirve como una herramienta innovadora para desentrañar la importancia y la influencia de los lugares en la literatura científica. Al posicionar los lugares como un elemento fundamental en los estudios cienciométricos, se amplían los límites de la Bibliometría espacial, ofreciendo una comprensión más holística de los lugares como objeto de investigación., [EN] Scientometrics has traditionally examined place in terms of author affiliations and, as such, has tended to overlook the more detailed use of geographical data in scholarly publications to design indicators of the scientific literature. This study constructs a comprehensive framework to formalize and unify the Scientometrics analysis of places (Spatial Framework to identify Bibliographic Relationships or SFBR), constituting three main stages: identification, description, and measurement. We present five descriptive dimensions and a set of 57 core metrics for scrutinizing the place-related features of science. These metrics encompass author-, publication-, and place-level parameters, categorized according to the specific section (zone) containing the geographical information (i.e., citing author affiliation, the body of the text, and cited author affiliation). The SFBR serves as an innovative tool for unraveling the significance and influence of place in scientific literature. By considering place a fundamental element in Scientometrics studies, it extends the boundaries of spatial bibliometrics and provides a more holistic understanding of place as research object.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Towards a sustainable optimization of pavement maintenance programs under budgetary restrictions

  • Torres Machí, Cristina
  • Chamorro, Alondra
  • Pellicer, Eugenio|||0000-0001-9100-0644
  • Yepes, V.|||0000-0001-5488-6001
Transport sector constitutes the second largest source of global greenhouse gas (GHG) emissions, being the road transportation the main contributor of these emissions. Efforts in the road sector have traditionally focused on vehicle emissions and infrastructure is typically not included in the emissions account. Road environmental impact is estimated to increase by 10% if the stages of road design, construction, and operation were considered. Previous literature has widely study sustainable practices in pavement design and construction, with little attention paid to maintenance. Current state of practice reveals that pavement managers barely consider environmental performance and their evaluations solely rely on technical and economic criteria. This situation creates the need to incorporate, in an integrated manner, technical, economic, and environmental aspects in the design of maintenance programs. The main objective of this research is to develop a tool for the optimal design of sustainable maintenance programs. Given a maintenance budget, the tool aims to maximize the long-term effectiveness of the network while minimizing GHG emissions derived from the application of maintenance treatments. The capability of the proposed tool is analyzed in a case study dealing with an urban pavement network. In comparison to the traditional maintenance policy, the proposed tool designs maintenance programs that increase the average network condition by up to 22% and reduces GHG emissions by 12%. This application also analyzes the effect of different budgetary scenarios in the technical and environmental performance of the network. This application helps pavement managers in the trade-off between budget and network performance., The authors gratefully acknowledge members of the research group at the Pontificia Universidad Catolica de Chile for providing information concerning the case study analyzed in this paper. The research team acknowledges Fondef/Conicyt 2009 for funding the project "Research and Development of Solutions for Urban Pavement Management in Chile" (D0911018) and the National Research Center for Integrated Natural Disaster Management CONICYT/FONDAP/15110017. Funding from CONICYT (CONICYT-PCHA/Doctorado Nacional/2013-63130138) to support this work is sincerely appreciated.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fostering Conservation via an Integrated Use of Conventional Approaches and High-Throughput SPET Genotyping: A Case Study Using the Endangered Canarian EndemicsSolanum lidiiandS. vespertilio (Solanaceae)

  • Gramazio, Pietro|||0000-0003-2226-7999
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Jaén-Molina, Ruth
  • Marrero, Águedo
  • Caujapé-Castells, Juli
  • Anderson, Gregory J.
[EN] Islands provide unique opportunities to integrated research approaches to study evolution and conservation because boundaries are circumscribed, geological ages are often precise, and many taxa are greatly imperiled. We combined morphological and hybridization studies with high-throughput genotyping platforms to streamline relationships in the endangered monophyletic and highly diverse lineage ofSolanumin the Canarian archipelago, where three endemic taxa are currently recognized. Inter-taxa hybridizations were performed, and morphological expression was assessed with a common-garden approach. Using the eggplant Single Primer Enrichment Technology (SPET) platform with 5,093 probes, 74 individuals of three endemic taxa (Solanum lidii,S. vespertiliosubsp.vespertilio, andS. vespertiliosubsp.doramae) were sampled for SNPs. While morphological and breeding studies showed clear distinctions and some continuous variation, inter-taxon hybrids were fertile and heterotic for vigor traits. SPET genotyping revealed 1,421 high-quality SNPs and supported four, not three, distinct taxonomic entities associated with post-emergence geological, ecological and geographic factors of the islands. Given the lack of barriers to hybridization among all the taxa and their molecular differences, great care must be taken in population management. Conservation strategies must take account of the sexual and breeding systems and genotypic distribution among populations to successfully conserve and restore threatened/endangered island taxa, as exemplified bySolanumon the Canary Islands., This work was supported by funds from project DEMIURGO to the Jardin Botanico Canario "Viera y Clavijo" -Unidad Asociada al CSIC of the Cabildo de Gran Canaria. Consumables and genotyping were funded by the Jardin Botanico Canario "Viera y Clavijo" -Unidad Asociada al CSIC. Participation of authors from Universitat Politecnica de Valencia has been partially funded by the European Union's Horizon 2020 Research and Innovation Programme under the Grant Agreement No. 677379 (G2P-SOL project: Linking genetic resources, genomes, and phenotypes of solanaceous crops). PG was grateful to Universitat Politecnica de Valencia and to Japan Society for the Promotion of Science for their respective Postdoctoral Grants [PAID-10-18 and FY2019-P19105 JSPS Postdoctoral Fellowship for Research in Japan (Standard)].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Choking dynamic of highly swirled flow in variable nozzle radial turbines

  • Tiseira, Andrés-Omar|||0000-0001-9472-2386
  • Dolz, Vicente|||0000-0003-1511-6957
  • Echavarria-Olaya, Juan David|||0000-0002-9611-0751
  • Inhestern, Lukas Benjamin
[EN] This paper presents the results of a computational investigation of the aerodynamic choking mechanism in a variable geometry turbine, which is widely used in automotive turbocharging. RANS and URANS numerical simulations were carried out for two stator vane positions, 10% and 30% opening at different speeds and several other operating conditions to observe the establishment of choked flow and rotorstator interactions. When the stator vanes are at a closed position and high-pressure ratio, a shock wave is developed on the suction side of the stator vane; moreover, the effective area extends toward the rotor inlet. The shock losses of a fluid particle upstream of the rotor are related to the number of shocks that the particle goes through. The pressure losses are high close to the stator vanes and start to decrease toward the center of the vaneless space until they start to increase close to the rotor. The interaction between the rotor and stator creates shocks waves with an intensity depending on the rotor's leading edge position and the rotational speed. The pressure profile of the rotor blade under this circumstance is also affected, especially at high rotational speeds, when important load fluctuations may affect the integrity of the blades., The work has been partially supported by the Subprograma de Formación de Profesorado Universitario (FPU). Ministerio de Universidades. FPU18/02628 and by the FPI Subprograma. Universitat Politècnica de València. PAID-10-18
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optical Evaluation of New Designs of Multifocal Diffractive Corneal Inlays

  • Montagud-Martínez, Diego
  • Furlan, Walter D.
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] Purpose. To assess the imaging properties of two different designs of a new concept of corneal inlays whose working principle is based on diffraction. Methods. The quality of the retinal images provided by Diffractive Corneal Inlays (DCIs) was evaluated theoretically in comparison with Small Aperture Corneal Inlay (SACI). ZEMAX OpticStudio software was employed for the simulations in an eye model with different pupil diameters (3.0 mm and 4.5 mm). The employed merit functions in the analysis were the Modulation Transfer Function (MTF), the area under the MTF (MTFa), and the Point Spread Function (PSF). Comparison was made with the SACI at different defocus conditions. Results. The bifocal nature of the DCIs was demonstrated in a model eye for the first time. It was shown that the intensity of the near focus depends on the radius of the central zone. Retinal image quality of the DCI was equal to or exceeded the SACI in the majority of visual conditions as was demonstrated with simulated images. Conclusions. A new customizable type of corneal inlays has been evaluated using objective numerical simulations. Improvements in imaging of near objects and in light throughput compared with the popular small aperture inlays were demonstrated. These findings open a new technical branch of minimally invasive surgical solutions for the treatment of presbyopia., D. Montagud-Martinez and V. Ferrando acknowledge the financial support from the Universitat Politècnica de València, Spain (fellowships FPI-2016 and PAID-10-18, respectively). This work was supported in part by the Ministerio de Economia y Competitividad, Spain, (grant DPI2015-71256-R) and by the Generalitat Valenciana (Grant PROMETEO/2019/048), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Introduction of a practical lesson for the evaluation of bioactive quality in plant materials addressed to students in Plant Breeding

  • Guijarro-Real, Carla
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Gramazio, Pietro|||0000-0003-2226-7999
  • Adalid-Martinez, Ana Maria|||0000-0002-3927-1348
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Rodríguez Burruezo, Adrián|||0000-0002-4530-8071
  • Fita, Ana|||0000-0002-8637-5852
[EN] According to the new market trends, one of the goals in many modern breeding programmes is the development of varieties with enhanced bioactive properties. Despite the importance of evaluating the content of specific molecules, the analysis of the broad antioxidant capacity is often suitable. For instance, if the goal is to evaluate large quantity of materials, or even to compare different agronomical practices to obtain the highest antioxidant properties. Thus, studies related to plant breeding should include subjects related to the knowledge of analytical methods for the evaluation of the bioactive properties in the materials tested. Theoretical lessons establish the basis for understanding the importance of bioactive properties and the influence of stresses in their content. Nevertheless, practical sessions complement this knowledge and improve the competence of future professionals, providing them a tool for the evaluation of bioactive quality in developing breeding materials. We consider therefore that this competence should be acquired during the Master degree in Plant Breeding offered by our institute. Thus, we propose to introduce a practical lesson in the mandatory subject "Instrumental Techniques" aimed to the comparison of two analytical methods for the analysis of bioactive properties. As plant material, we will use water celery, an herbaceous species with great antioxidant properties. The methodology will include the analysis of the antioxidant activity with the DPPH method and the content in total phenolics, both spectrophotometric methods but measuring different aspects of the bioactive quality. The lesson is divided in three sessions of three hours each, in the course of which students will perform all steps for these analyses, including sample preparation, extraction of bioactive molecules, preparation of the calibration curve, and analysis of results. This practical lesson provides students with the competence to evaluate the antioxidant activity of high number of materials using quick and simple spectrophotometric methodologies, and to deal with real problems such as the need of dilution for samples with very high content of bioactive molecules. Moreover, the practical lesson provides the guidelines to adapt the protocols for different materials and consequently to many breeding programmes, and can be also adapted for food technology students., Carla Guijarro-Real is grateful to the Ministerio de Educación, Cultura y Deporte of Spain (MECD) for a predoctoral FPU grant (FPU14-06798). Mariola Plazas is grateful to Generalitat Valenciana and Fondo Social Europeo for a post-doctoral grant (APOSTD/2018/014). Pietro Gramazio is grateful to Universitat Politècnica de València for a post-doctoral contract (PAID-10-18) within the Programa de Ayudas de Investigación y Desarrollo initiative. Ana M Adalid-Martínez is grateful to the Ministerio de Ciencia, Innovación y Universidad of Spain for its support with a post-doctoral contract (PTA2015- 11502-I) within the Subprograma Personal Técnico de Apoyo initiative.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Introduction and development of a practical lesson for improving the competence of Master students in Plant Breeding: The usefulness of specific software in phenotyping tasks

  • Guijarro-Real, Carla
  • Gramazio, Pietro|||0000-0003-2226-7999
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Adalid-Martinez, Ana Maria|||0000-0002-3927-1348
  • Rodríguez Burruezo, Adrián|||0000-0002-4530-8071
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Fita, Ana|||0000-0002-8637-5852
[EN] An essential step in many plant breeding programmes is the morphoagronomic phenotyping of the materials that are being developed, using standardized descriptors or, when not available, as it is the case of new crops, consensus guidelines to characterize them. Although many of the traits must be evaluated in the field, those related to the shape and size of leaves and fruits can be easily measured with specific software using digital pictures. This tool provides several advantages, including: 1) more accurate and objective measurements; 2) the possibility of measuring other traits of interest such as area or perimeter, that in other case would not be easily evaluated; or even 3) the possibility of delaying the analysis of pictures in order to focus on field traits. Therefore, the knowledge and management of this tool can become of high usefulness. The Plant Breeding Master offered by our institute is aimed at training professionals able to improve crops and develop new ones according to market trends, in addition to improve adaptation and resistance to biotic and abiotic stresses. Due to the importance of phenotyping considering any of the above breeding goals, in this paper we propose the introduction of a practical session in the mandatory subject "Instrumental Techniques": the management and comparison of adequacy of two specific software tools considering the material to be analyzed. As material, we propose a collection of pepper varieties for analysis of fruits, and a collection of rocket (Eruca and Diplotaxis spp.) germplasm for analysis of leaves, due to the broad variability observed in those materials. The MorphoLeaf v1.0 software will be used for the analysis of leaves, and the Tomato Analyzer 3.0 software will be used for the analysis of fruits and also for leaves. According to the design of the practical lesson, only one session of three hours is required, in which students will learn to properly digitalize materials considering the restrictions of each software and material used, and to obtain all the information needed in each case. In addition, there will be one hour of autonomous work in which both tools and the results obtained will be compared by the students, and a report will be prepared. This practical lesson allows students to acquire the competence for the correct use of different computer tools in the phenotyping task. The comparison of analyses using different scan adjustments and software will allow students to understand the disadvantages of each option and problems that could occur, in order to minimize them. In summary, this practical lesson gives a tool for improving the future phenotyping works of students during their careers, teaching them to consider the best software prior to analysis in order to improve the digitalizing step according to software restrictions, and to obtain more accurate information with a reduction of working time, thus increasing efficiency., Carla Guijarro-Real is grateful to the Ministerio de Educación, Cultura y Deporte of Spain for a predoctoral FPU grant (FPU14-06798). Pietro Gramazio is grateful to Universitat Politècnica de València for a post-doctoral contract (PAID-10-18) within the Programa de Ayudas de Investigación y Desarrollo initiative. Mariola Plazas is grateful to Generalitat Valenciana and Fondo Social Europeo for a post-doctoral grant (APOSTD/2018/014). Ana M Adalid-Martínez is grateful to the Ministerio de Ciencia, Innovación y Universidad of Spain for its support with a post-doctoral contract (PTA2015- 11502-I) within the Subprograma Personal Técnico de Apoyo initiative.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Current Models and Practices of Economic and Environmental Evaluation for Sustainable Network-Level Pavement Management, Modelos y prácticas actuales en la evaluación económica y ambiental para la gestión sostenible de redes de pavimentos

  • Torres Machí, Cristina
  • Chamorro, Alondra
  • Yepes, V.|||0000-0001-5488-6001
  • Pellicer, Eugenio|||0000-0001-9100-0644
[EN] Ground transportation infrastructures, particularly road infrastructure, are essential for economic and social development. The quality level that the user perceives is mainly determined by the pavement condition. More than 400 billion dollars are invested globally each year in pavement construction and maintenance; these tasks increase by 10% the environmental impact generated by vehicle operation. Therefore, a sustainable approach should be incorporated in the assessment of preservation alternatives that consider technical, economic, environmental, political and institutional aspects in an integrated manner over their life-cycle. The purpose of the present research is to examine the models and practices for the economic and environmental evaluation of pavement assets, in order to analyze the advantages and limitations of the current state of the practice and identify the opportunities to improve their sustainable management. One of the main limitations identified is the lack of models that consider the economic and environmental aspects integrally. A need for models which consider the impact on users in work zones, as well as the use of new technologies and recycled materials that are more respectful of the environment, has been detected., [ES] Las infraestructuras de transporte terrestre y particularmente la infraestructura vial son fundamentales en el desarrollo económico y social. El nivel de calidad percibido por el usuario viene determinado, principalmente, por el pavimento. A nivel mundial se invierte anualmente más de 400 mil millones de dólares en la construcción y el mantenimiento de pavimentos; tareas que aumentan en un 10% el impacto ambiental generado por la circulación de los vehículos. Surge así la necesidad de incorporar un enfoque sostenible en la evaluación de alternativas de conservación que considere aspectos técnicos, económicos, medioambientales, políticos e institucionales de forma integrada y armónica a lo largo de su ciclo de vida. La presente investigación tiene por objeto estudiar los modelos y prácticas en la evaluación económica y ambiental de pavimentos para analizar las ventajas y las limitaciones de la práctica actual e identificar oportunidades para mejorar su gestión sostenible. Una de las principales limitaciones identificadas es la escasez de modelos que consideren de forma integrada los aspectos económicos y ambientales. Se detecta la necesidad de modelos que consideren el efecto sobre los usuarios en zonas de trabajo así como el uso de nuevas tecnologías y materiales reciclados más respetuosos con el medio ambiente., Authors gratefully acknowledge members of the research group at the Pontificia Universidad Católica de Chile for their resources during the study. The research team acknowledges Fondef/Conicyt 2009 for funding the project “Research and Development of Solutions for Urban Pavement Management in Chile” (D09I1018) and the National Research Center for Integrated Natural Disaster Management CONICYT/FONDAP/15110017. Funding over Conicyt (CONICYT-PCHA/Doctorado Nacional/2013-63130138) to support this work is sincerely appreciated..
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A new trifocal corneal inlay for presbyopia

  • Furlan, Walter D.
  • Montagud-Martínez, Diego
  • Garcia-Delpech, Salvador
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] Corneal inlays (CIs) are the most recent surgical procedure for the treatment of presbyopia in patients who want complete independence from the use of glasses or contact lenses. Although refractive surgery in presbyopic patients is mostly performed in combination with cataract surgery, when the implantation of an intraocular lens is not necessary, the option of CIs has the advantage of being minimally invasive. Current designs of CIs are, either: small aperture devices, or refractive devices, however, both methods do not have good performance simultaneously at intermediate and near distances in eyes that are unable to accommodate. In the present study, we propose the first design of a trifocal CI, allowing good vision, at the same time, at far, intermediate and near vision in presbyopic eyes. We first demonstrate the good performance of the new inlay in comparison with a commercially available CI by using optical design software. We next confirm experimentally the image forming capabilities of our proposal employing an adaptive optics based optical simulator. This new design also has a number of parameters that can be varied to make personalized trifocal CI, opening up a new avenue for the treatment of presbyopia., This work was supported by Ministerio de Ciencia e Innovacion, Spain (Grant PID2019-107391RB-I00) and by Generalitat Valenciana, Spain, (Grant PROMETEO/2019/048). D. Montagud-Martinez and V. Ferrando acknowledge the financial support from the Universitat Politecnica de Valencia, Spain (fellowships FPI-2016 and PAID-10-18, respectively)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Genetic insights into the modification of the pre-fertilization mechanisms during plant domestication

  • Manrique, Silvia
  • Friel, James
  • Hasing, Tomas
  • Ezquer, Ignacio
  • Bombarely, Aureliano
  • Gramazio, Pietro|||0000-0003-2226-7999
[EN] Plant domestication is the process of adapting plants to human use by selecting specific traits. The selection process often involves the modification of some components of the plant reproductive mechanisms. Allelic variants of genes associated with flowering time, vernalization, and the circadian clock are responsible for the adaptation of crops, such as rice, maize, barley, wheat, and tomato, to non-native latitudes. Modifications in the plant architecture and branching have been selected for higher yields and easier harvests. These phenotypes are often produced by alterations in the regulation of the transition of shoot apical meristems to inflorescences, and then to floral meristems. Floral homeotic mutants are responsible for popular double-flower phenotypes in Japanese cherries, roses, camellias, and lilies. The rise of peloric flowers in ornamentals such as snapdragon and florists' gloxinia is associated with non-functional alleles that control the relative expansion of lateral and ventral petals. Mechanisms to force outcrossing such as self-incompatibility have been removed in some tree crops cultivars such as almonds and peaches. In this review, we revisit some of these important concepts from the plant domestication perspective, focusing on four topics related to the pre-fertilization mechanisms: flowering time, inflorescence architecture, flower development, and pre-fertilization self-incompatibility mechanisms., We would like to acknowledge the FruitLook FP7-PEOPLE-2013-IRSES-Marie Curie Action (Project ID: 612640), the SexSeed H2020-EU.1.3.3. MSCA-RISE-Marie Sklodowska-Curie Research, Innovation Staff Exchange project (Project ID: 690946), H2020-MSCA RISE Project (ExpoSeed GA-691109), and the Universita degli Studi di Milano (UNIMI-RTD and Linea 2-DBS) for bringing together the team that developed this article. PG is grateful to Universitat Politecnica de Valencia (PAID-10-18) and to the Japan Society for the Promotion of Science [FY2019 JSPS Postdoctoral Fellowship for Research in Japan (Standard)] for their respective postdoctoral grants. We would also like to thank the Society of Experimental Biology for the opportunity of summarizing some of our ideas in this article.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

New objective QoE models for evaluating ABR algorithms in DASH

  • De Fez Lava, Ismael
  • Belda Ortega, Román|||0000-0003-2244-2371
  • Guerri Cebollada, Juan Carlos|||0000-0002-5807-1923
[EN] As users become more demanding with regards to the consumption of multimedia content, the importance of measuring their level of satisfaction is growing. The difficulty in terms of time and resources for assessing the Quality of Experience (QoE) has popularized the use of objective QoE models, which try to emulate human behavior regarding the playback of multimedia streaming. Some objective QoE models existing in the literature are based on the bitrate. However, the PSNR (Peak Signal-to-Noise Ratio) or VMAF (Video Multimethod Assessment Fusion) have been proved to be metrics with a closer relationship with the QoE than the bitrate. This paper proposes three new models to measure the QoE analytically in DASH (Dynamic Adaptive Streaming over HTTP) video services. The first is based on the bitrate of the displayed video segments, whereas the second and the third are based on the PSNR and VMAF of each video segment, respectively. The proposed models are compared to the ITU-T standard P.1203 as well as the bitrate-based QoE model proposed by Yin et al. Moreover, the paper presents a subjective study, which confirms the validity of the proposed models. The models are validated by using different DASH adaptation algorithms. In this sense, this paper also presents a DASH ABR (Adaptive Bitrate Streaming) algorithm called Look Ahead, which takes into account the inherent bitrate variability of the video encoding process in order to calculate, in real time, the appropriate quality level that minimizes the number of stalls during the playback., This work is supported by the PAID-10-18 Program and by the R&D Line "Technologies for distribution and processing of multimedia information and QoE'' from the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bio-Polyethylene-Based Composites Reinforced with Alkali and Palmitoyl Chloride-Treated Coffee Silverskin

  • Dominici, Franco
  • Luzi, Francesca
  • Puglia, Debora
  • Torre, Luigi
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Fombuena, Vicent|||0000-0001-7266-6205
  • Balart, Rafael|||0000-0001-5670-7126
[EN] This work investigates the feasibility of using coffee silverskin (CSS) as a reinforcing agent in biobased polyethylene (BioPE) composites, by adding it in bulk and thin film samples. The effect of two different treatments, alkali bleaching (CSS_A) and esterification with palmitoyl chloride (CSS_P), on mechanical, thermal, morphological and water absorption behavior of produced materials at different CSS loading (10, 20 and 30 wt %) was investigated. A reactive graft copolymerization of BioPE with maleic anhydride was considered in the case of alkali treated CSS. It was found that, when introduced in bulk samples, improvement in the elastic modulus and a reduction in strain at maximum stress were observed with the increase in CSS fraction for the untreated and treated CSS composites, while the low aspect ratio of the CSS particles and their poor adhesion with the polymeric matrix were responsible for reduced ductility in films, decreasing crystallinity values and reduction of elastic moduli. When CSS_A and CSS_P are introduced in the matrix, a substantial reduction in the water uptake is also obtained in films, mainly due to presence of maleated PE, that builds up some interactions to eliminate the amounts of OH groups and hydrophobized CSS, due to the weakened absorption capacity of the functionalized CSS., This research was partially funded by the Ministry of Science, Innovation, and Universities (MICIU) project number MAT2017-84909-C2-2-R. D.G.G. wants to thank the Universitat Politècnica de València for financial support through a postdoctoral contract [PAID-10-18].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Diseño, realización y evaluación de implantes intracorneales difractivos multifocales

  • Montagud Martínez, Diego
[ES] La presbicia es el error refractivo con mayor incidencia en la población debido al envejecimiento de la misma. Existen múltiples medidas para corregirla, desde lentes oftálmicas, lentes de contacto, lentes intraoculares etc¿ Actualmente, los implantes intracorneales (corneal inlays) se encuentran entre las soluciones más novedosas. Estos dispositivos se sitúan en el estroma corneal mediante una cirugía mínimamente invasiva. Existen tres implantes intracorneales comerciales cuyos mecanismos difieren entre sí. El más estudiado es el KAMRA inlay® y utiliza el efecto estenopeico para aumentar la profundad de foco. Por otra parte, Flexivue Microlens® se basa en una estructura multifocal donde el centro focaliza en lejos mientras que la periferia focaliza en cerca. Por último, Raindrop Near Vision® modifica la estructura de la córnea para aumentar el radio de curvatura de la parte central de ésta y permitir enfocar a distancias próximas. Todos ellos deben permitir el paso de nutrientes y oxígeno a través de la córnea, ya sea mediante aperturas o siendo permeables. Existe un cuarto tipo de implante intracorneal no comercial desarrollado por el Diffractive Optics Group (DiOG), el cual distribuye los micro-agujeros, que permiten el paso de nutrientes y oxígeno, en las zonas transparentes de una placa zonal de Fresnel. Además, contiene un agujero central, que actúa como estenopeico. Este dispositivo tiene como nombre Diffractive Corneal Inlay (DCI). Esta Tesis pretende modificar y optimizar los parámetros de diseño del DCI y comparar sus propiedades ópticas con otros implantes intracorneales comerciales., [EN] Presbyopia is the refractive error with the highest incidence in the population due to the aging of the population. There are many solutions to correct it, from ophthalmic lenses, contact lenses, intraocular lenses, etc... Currently the corneal inlays are among the newest solutions. These devices are placed in the corneal stroma by means of minimally invasive surgery. There are three commercial corneal inlays whose mechanisms differ from each other. The most studied is KAMRA inlay® which uses the pinhole effect to increase the depth of focus. On the other hand, Flexivue Microlens® is based on a multi-focal structure where the center focuses at distance vision while the periphery focuses at near vision. Finally, Raindrop Near Vision® modifies the structure of the cornea to increase the radius of curvature of the central part of it and allow focusing at near vision. All of them must all allow pass through to the cornea nutrients and oxygen, either by holes or being permeable. There is a fourth type of non-commercial corneal inlay developed by the Diffractive Optics Group (DiOG), which distributes micro-holes, allow the passage of nutrients and oxygen, in the transparent zones of a Fresnel zone plate. In addition, it contains a central hole, which acts as a pinhole. This device is called Diffractive Corneal Inlay (DCI). This Thesis aims to modify and optimize the design parameters of the DCI and to compare its optical properties with other commercial corneal inlays., [CA] La presbícia es l'error refractiu amb major incidència en la població degut a l'envelliment d'aquesta. Hi existeixen múltiples solucions per corregir-la, des de lents oftàlmiques, lents de contacte, lents intraoculars, etc... Actualment, els implants intracorneales comercials es troben entre les solucions mes noves. Aquests dispositius es situen a l'estroma corneal mitjançant uns cirurgia mínimament invasiva. Hi existeixen tres tipus d'implants intracorneals amb diferents mecanismes. El mes estudiat es el KAMRA inlay® i utilitza l'efecte estenopeic per augmentar la profunditat de focus. Per altra banda, Flexivue Microlens® es basa en una estructura multifocal on el centre de la lent focalitza en el focus llunyà mentre que la perifèria focalitza prop. Per últim Raindrop Near Vision® modifica l'estructura de la còrnia per augmentar el radi de curvatura de la part central d'aquesta i permetre enfocar a distàncies pròximes. Tots ells deuen permetre el pas de nutrients i oxigen a través de la còrnia, ja siga mitjançant obertures o sent permeables. Existeix un quart tipus d'implant intracorneal no comercial desenvolupat pel Diffractive Optics Group (DiOG), el qual distribueix els micro-forats, que permeten el flux de nutrients i oxigen, en les zones transparents d'una placa zonal de Fresnel. A més, contenen un forat central, que actua com estenopeic. Aquest dispositiu rep el nom Diffractive Corneal Inlay (DCI). Aquesta tesi pretén modificar i optimitzar els paràmetres de disseny del DCI i comparar les seues propietats òptiques amb altres implantes intracorneals comercials., Funding: Ministerio de Economía y Competitividad (DPI2015-71256-R); Generalitat Valenciana (PROMETEO/2019/048). D. Montagud-Martínez and V. Ferrando acknowledge the financial support from the Universitat Politècnica de València, Spain (fellowships FPI-2016 and PAID10-18, respectively).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Visual Behavior, Pupil Dilation, and Ability to Identify Emotions From Facial Expressions After Stroke

  • Maza, Anny
  • Moliner, Belén
  • Ferri, Joan
  • Llorens Rodríguez, Roberto|||0000-0002-8677-8707
[EN] Social cognition is the innate human ability to interpret the emotional state of others from contextual verbal and non-verbal information, and to self-regulate accordingly. Facial expressions are one of the most relevant sources of non-verbal communication, and their interpretation has been extensively investigated in the literature, using both behavioral and physiological measures, such as those derived from visual activity and visual responses. The decoding of facial expressions of emotion is performed by conscious and unconscious cognitive processes that involve a complex brain network that can be damaged after cerebrovascular accidents. A diminished ability to identify facial expressions of emotion has been reported after stroke, which has traditionally been attributed to impaired emotional processing. While this can be true, an alteration in visual behavior after brain injury could also negatively contribute to this ability. This study investigated the accuracy, distribution of responses, visual behavior, and pupil dilation of individuals with stroke while identifying emotional facial expressions. Our results corroborated impaired performance after stroke and exhibited decreased attention to the eyes, evidenced by a diminished time and number of fixations made in this area in comparison to healthy subjects and comparable pupil dilation. The differences in visual behavior reached statistical significance in some emotions when comparing individuals with stroke with impaired performance with healthy subjects, but not when individuals post-stroke with comparable performance were considered. The performance dependence of visual behavior, although not determinant, might indicate that altered visual behavior could be a negatively contributing factor for emotion recognition from facial expressions., This study was funded by Conselleria de Educacion, Cultura y Deporte of Generalitat Valenciana of Spain (Project SEJI/2019/017), and Universitat Politecnica de Valencia (Grant PAID-10-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Development of Choked Flow in Variable Nozzle Radial Turbines

  • Tiseira, Andrés-Omar|||0000-0001-9472-2386
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Echavarria-Olaya, Juan David|||0000-0002-9611-0751
  • Inhestern, Lukas Benjamin
[EN] In commonly applied one-dimensional choking models for radial turbines, choked flow is assumed to appear in the geometrical throat of each stator and rotor. Coupled and complex three-dimensional effects are not considered. In order to analyze the internal aerodynamic in a radial turbine at off design conditions and before carrying out experimental tests, which in the case of automotive turbocharger are limited by their compact size, computational fluid dynamics (CFD) simulations stand out as a useful tool. This paper presents the study of a variable geometry turbine (VGT) of a commercial turbocharger at off design conditions reaching choked flow, analyzing the presence of this limiting conditions in the stator and rotor under different operation points and VGT positions. Reynolds-averaged Navier-Stokes (RANS) and unsteady RANS simulation have been performed to obtain the flow structures in stator and rotor. The results reveal that the choked effective area mostly depends on the stator vane position and pressure ratio. For the closed VGT position a standing shock wave appears on the stator suction side and expands through the vaneless space. For the opened VGT position the flow is choked at the rotor outlet. However, the evolution of the choked area highly depends on the rotational speed and the secondary flow. A strong interaction with the tip leakage vortex has been identified, The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: The work has been partially supported by the "Subprograma de Formacion de Profesorado Universitario (FPU).'' Ministerio de Universidades. FPU18/02628 and by the "FPI Subprograma 2.'' Universitat Polite cnica de Valencia. PAID-10-18.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Whole-Genome Resequencing of Seven Eggplant (Solanum melongena) and One Wild Relative (S. incanum) Accessions Provides New Insights and Breeding Tools for Eggplant Enhancement

  • Gramazio, Pietro|||0000-0003-2226-7999
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Yan, Haidong
  • Hasing, Tomas
  • Bombarely, Aureliano
[EN] Whole-genome resequencing provides information of great relevance for crop genetics, evolution, and breeding. Here, we present the first whole-genome resequencing study using seven eggplant (Solanum melongena) and one wild relative (Solanum incanum) accessions. These eight accessions were selected for displaying a high phenotypic and genetic diversity and for being the founder parents of an eggplant multiparent advanced generation intercrosses population. By resequencing at an average depth of 19.8x and comparing to the high-quality reference genome "67/3" over 10 million high-reliable polymorphisms were discovered, of which over 9 million (84.5%) were single nucleotide polymorphisms and more than 700,000 (6.5%) InDels. However, while for the S. melongena accessions, the variants identified ranged from 0.8 to 1.3 million, over 9 million were detected for the wild S. incanum. This confirms the narrow genetic diversity of the domesticated eggplant and suggests that introgression breeding using wild relatives can efficiently contribute to broadening the genetic basis of this crop. Differences were observed among accessions for the enrichment in genes regulating important biological processes. By analyzing the distribution of the variants, we identified the potential footprints of old introgressions from wild relatives that can help to unravel the unclear domestication and breeding history. The comprehensive annotation of these eight genomes and the information provided in this study represents a landmark in eggplant genomics and allows the development of tools for eggplant genetics and breeding., This work has been funded by the European Union's Horizon 2020 Research and Innovation Programme under grant agreement no. 677379 (G2P-SOL project: Linking genetic resources, genomes, and phenotypes of Solanaceous crops), by the Spanish Ministerio de Economia, Industria y Competitividad and Fondo Europeo de Desarrollo Regional/European Regional Development Fund (grant AGL2015-64755-R), and by the Spanish Ministerio de Ciencia, Innovacion y Universidades (MCIU), Agencia Estatal de Investigacion (AEI), and Fondo Europeo de Desarrollo Regional/European Regional Development Fund (grant RTI2018-09592-B-100). PG is grateful to Universitat Politecnica de Valencia and to Japan Society for the Promotion of Science for their respective postdoctoral grants [PAID-10-18 and FY2019 JSPS Postdoctoral Fellowship for Research in Japan (Standard)].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

An Iterative Approach for the Optimization of Pavement Maintenance Management at the Network Level

  • Torres Machí, Cristina
  • Chamorro, A.
  • Videla, C.
  • Pellicer, Eugenio|||0000-0001-9100-0644
  • Yepes, V.|||0000-0001-5488-6001
Pavement maintenance is one of the major issues of public agencies. Insufficient investment or inefficient maintenance strategies lead to high economic expenses in the long term. Under budgetary restrictions, the optimal allocation of resources becomes a crucial aspect. Two traditional approaches (sequential and holistic) and four classes of optimization methods (selection based on ranking, mathematical optimization, near optimization, and other methods) have been applied to solve this problem. They vary in the number of alternatives considered and how the selection process is performed.Therefore, a previous understanding of the problem is mandatory to identify the most suitable approach and method for a particular network. This study aims to assist highway agencies, researchers, and practitioners onwhen and howto apply availablemethods based on a comparative analysis of the current state of the practice. Holistic approach tackles the problem considering the overall network condition, while the sequential approach is easier to implement and understand, but may lead to solutions far from optimal. Scenarios defining the suitability of these approaches are defined. Finally, an iterative approach gathering the advantages of traditional approaches is proposed and applied in a case study. The proposed approach considers the overall network condition in a simpler and more intuitive manner than the holistic approach., The authors gratefully acknowledge members of the research group at the Pontificia Universidad Catolica de Chile for their contributions and resources during the study. The research team acknowledges Conicyt-Fondef/Decimoseptimo Concurso de Proyectos de Investigacion y Desarrollo del Fondo de Fomento al Desarrollo Cientifico y Tecnologico, Fondef/Conicyt 2009 (D09I1018) for funding this project. Support of the associated institutions is also appreciated: Ministry of Housing and Urban Development (Ministerio de Vivienda y Urbanismo), Regional Government for Metropolitan Region (Gobierno Regional de la Region Metropolitana), Municipality of Santiago (Municipalidad de Santiago), and Municipality of Macul (Municipalidad de Macul). Funding over Santander Universidades (Becas Iberoamerica Jovenes Profesionales e Investigadores, 2013) to support this work is sincerely appreciated.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fuzzy Postprocessing to Advance the Quality of Continental Seasonal Hydrological Forecasts for River Basin Management

  • Macian-Sorribes, Hector|||0000-0003-4077-9955
  • Pulido-Velazquez, M.|||0000-0001-7009-6130
  • Pechlivanidis, Ilias
  • Crochemore, Louise
[EN] Streamflow forecasting services driven by seasonal meteorological forecasts from dynamic prediction systems deliver valuable information for decision-making in the water sector. Moving beyond the traditional river basin boundaries, large-scale hydrological models enable a coordinated, efficient, and harmonized anticipation and management of water-related risks (droughts, floods). However, the use of forecasts from such models at the river basin scale remains a challenge, depending on how the model reproduces the hydrological features of each particular river basin. Consequently, postprocessing of forecasts is a crucial step to ensure usefulness at the river basin scale. In this paper we present a methodology to postprocess seasonal streamflow forecasts from large-scale hydrological models and advance their quality for local applications. It consists of fuzzy logic systems that bias-adjust seasonal forecasts from a large-scale hydrological model by comparing its modeled streamflows with local observations. The methodology is demonstrated using forecasts from the pan-European hydrological model E-HYPE at the Jucar River basin (Spain). Fuzzy postprocessed forecasts are compared to postprocessed forecasts derived from a quantile mapping approach as a benchmark. Fuzzy postprocessing was able to provide skillful streamflow forecasts for the Jucar River basin, keeping most of the skill of raw E-HYPE forecasts and also outperforming quantile-mapping-based forecasts. The proposed methodology offers an efficient one-to-one mapping between large-scale modeled streamflows and basin-scale observations preserving its temporal dependence structure and can adapt its input set to increase the skill of postprocessed forecasts., This study was partially funded by the EU Horizon 2020 programme under the IMPREX research and innovation project (grant agreement no. 641.811), by the European Research Area for Climate Services programme (ER4CS) under the INNOVA project (Grant Agreement 690462), by the ADAPTAMED project (RTI2018-101483-B-I00) from the Ministerio de Ciencia, Innovacion Universidades (MICINN) of Spain, and by the postdoctoral program of Universitat Politecnica de Valencia (PAID 10-18). Funding was also received from the EU Horizon 2020 project S2S4E (Sub -seasonal to Seasonal forecasting for the Energy sector) under Grant Agreement 776787. This study was also partially funded by the EU Horizon 2020 project CLARA under the Grant Agreement 730482.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Inferring efficient operating rules in multireservoir water resource systems: A review

  • Macian-Sorribes, Hector|||0000-0003-4077-9955
  • Pulido-Velazquez, M.|||0000-0001-7009-6130
[EN] Coordinated and efficient operation of water resource systems becomes essential to deal with growing demands and uncertain resources in water-stressed regions. System analysis models and tools help address the complexities of multireservoir systems when defining operating rules. This paper reviews the state of the art in developing operating rules for multireservoir water resource systems, focusing on efficient system operation. This review focuses on how optimal operating rules can be derived and represented. Advantages and drawbacks of each approach are discussed. Major approaches to derive optimal operating rules include direct optimization of reservoir operation, embedding conditional operating rules in simulation-optimization frameworks, and inferring rules from optimization results. Suggestions on which approach to use depend on context. Parametrization-simulation-optimization or rule inference using heuristics are promising approaches. Increased forecasting capabilities will further benefit the use of model predictive control algorithms to improve system operation. This article is categorized under: Engineering Water > Water, Health, and Sanitation Engineering Water > Methods, The study has been partially funded by the ADAPTAMED project (RTI2018-101483-B-I00) from the Ministerio de Ciencia, Innovacion Universidades (MICINN) of Spain, and by the postdoctoral program (PAID-10-18) of the Universitat Politecnica de Valencia (UPV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Look ahead to improve QoE in DASH streaming

  • Belda Ortega, Román|||0000-0003-2244-2371
  • Arce Vila, Pau|||0000-0001-5726-9228
  • Guerri Cebollada, Juan Carlos|||0000-0002-5807-1923
  • De Fez Lava, Ismael
[EN] When a video is encoded with constant quality, the resulting bitstream will have variable bitrate due to the inherent nature of the video encoding process. This paper proposes a video Adaptive Bitrate Streaming (ABR) algorithm, called Look Ahead, which takes into account this bitrate variability in order to calculate, in real time, the appropriate quality level that minimizes the number of interruptions during the playback. The algorithm is based on the Dynamic Adaptive Streaming over HTTP (DASH) standard for on-demand video services. In fact, it has been implemented and integrated into ExoPlayer v2, the latest version of the library developed by Google to play DASH contents. The proposed algorithm is compared to the Müller and Segment Aware Rate Adaptation (SARA) algorithms as well as to the default ABR algorithm integrated into ExoPlayer. The comparison is carried out by using the most relevant parameters that affect the Quality of Experience (QoE) in video playback services, that is, number and duration of stalls, average quality of the video playback and number of representation switches. These parameters can be combined to define a QoE model. In this sense, this paper also proposes two new QoE models for the evaluation of ABR algorithms. One of them considers the bitrate of every segment of each representation, and the second is based on VMAF (Video Multimethod Assessment Fusion), a Video Quality Assessment (VQA) method developed by Netflix. The evaluations presented in the paper reflect: first, that Look Ahead outperforms the Müller, SARA and the ExoPlayer ABR algorithms in terms of number and duration of video playback stalls, with hardly decreasing the average video quality; and second, that the two QoE models proposed are more accurate than other similar models existing in the literature., This work is supported by the PAID-10-18 Program of the Universitat Politecnica de Valencia (Ayudas para contratos de acceso al sistema espanol de Ciencia, Tecnologia e Innovacion, en estructuras de investigacion de la Universitat Politecnica de Valencia) and by the Project 20180810 from the Universitat Politecnica de Valencia ("Tecnologias de distribucion y procesado de informacion multimedia y QoE").
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Imaging Performance of a Diffractive Corneal Inlay for Presbyopia in a Model Eye

  • Montagud-Martínez, Diego
  • Machado-Olivares, Federico Jose
  • FURLAN, WALTER DANIEL
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
[EN] In this work we evaluated the imaging properties of the Diffractive Corneal Inlay (DCI), a novel type of corneal implant working by diffraction that we proposed for the treatment of presbyopia. ZEMAX OpticStudio software was employed for the numerical assessment, with simulations performed in a human-based eye model. In the ray tracing analysis, we used the Modulation Transfer Function (MTF), the Area under the MTF (AMTF), and the Point Spread Function (PSF). The theoretical performance of the DCI under different situations was evaluated in comparison with a commercially available pinhole based corneal inlay. Finally, real images were obtained experimentally in vitro in a model eye with inlays prototypes. The obtained results allow to state that the DCI exhibits a very high light throughput, improved imaging capabilities for far and near objects, and robustness against decentrations., This work was supported in part by the Ministerio de Economia y Competitividad under Grant DPI2015-71256-R, and in part by the Generalitat Valenciana, Spain, under Grant PROMETEO/2019/048. The work of D. Montagud-Martinez and V. Ferrando was supported by the Universitat Politecnica de Valencia, Spain, under Grant FPI-2016 and Grant PAID-10-18.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Embodiment and Presence in Virtual Reality After Stroke. A Comparative Study With Healthy Subjects

  • Borrego, Adrián|||0000-0001-5134-7811
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Llorens Rodríguez, Roberto|||0000-0002-8677-8707
  • Latorre, Jorge
[EN] The ability of virtual reality (VR) to recreate controlled, immersive, and interactive environments that provide intensive and customized exercises has motivated its therapeutic use after stroke. Interaction and bodily presence in VR-based interventions is usually mediated through virtual selves, which synchronously represent body movements or responses to events on external input devices. Embodied self-representations in the virtual world not only provide an anchor for visuomotor tasks, but their morphologies can have behavioral implications. While research has focused on the underlying subjective mechanisms of exposure to VR on healthy individuals, the transference of these findings to individuals with stroke is not evident and remains unexplored, which could affect the experience and, ultimately, the clinical effectiveness of neurorehabilitation interventions. This study determined and compared the sense of embodiment and presence elicited by a virtual environment under different perspectives and levels of immersion in healthy subjects and individuals with stroke. Forty-six healthy subjects and 32 individuals with stroke embodied a gender-matched neutral avatar in a virtual environment that was displayed in a first-person perspective with a head-mounted display and in a third-person perspective with a screen, and the participants were asked to interact in a virtual task for 10 min under each condition in counterbalanced order, and to complete two questionnaires about the sense of embodiment and presence experienced during the interaction. The sense of body-ownership, self-location, and presence were more vividly experienced in a first-person than in a third-person perspective by both healthy subjects (p < 0.001, eta(2)(p) = 0.212; p = 0.005, eta(2)(p) = 0.101; p = 0.001, eta(2)(p) = 0.401, respectively) and individuals with stroke (p = 0.019, eta(2)(p) = 0.070; p = 0.001, eta(2)(p) = 0.135; p = 0.014, eta(2)(p) = 0.077, respectively). In contrast, no agency perspective-related differences were found in any group. All measures were consistently higher for healthy controls than for individuals with stroke, but differences between groups only reached statistical significance in presence under the first-person condition (p < 0.010, eta(2)(p) = 0.084). In spite of these differences, the participants experienced a vivid sense of embodiment and presence in almost all conditions. These results provide first evidence that, although less intensively, embodiment and presence are similarly experienced by individuals who have suffered a stroke and by healthy individuals, which could support the vividness of their experience and, consequently, the effectiveness of VR-based interventions., This study was funded by Ministerio de Economía y Competitividad of Spain (Project RTC-2017-6051-7 and Grant BES-2014-068218), Fundació la Marató de la TV3 (Grant 201701-10), and Universitat Politècnica de València (Grant PAID-10-18). We acknowledge the support of NVIDIA Corporation with the donation of the Titan Xp GPU used for this research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Transmisión inalámbrica multimedia coordinada con DASH-SAND

  • Belda Ortega, Román|||0000-0003-2244-2371
  • Guerri Cebollada, Juan Carlos|||0000-0002-5807-1923
  • De Fez Lava, Ismael
[EN] The adoption of DASH (Dynamic Adaptive Streaming over HTTP) as a video transmission standard has introduced new challenges in environments with high density of Wi-Fi clients. If video players do not take into account the playback status of other devices in the network unfair bandwidth distribution may cause playback problems (stalls, low playback quality, etc.). This paper proposes a collaborative playback technique based on DASH-SAND (MPEG¿s Server and Network Assisted DASH) that aims to reduce, in a collaborative way, the number of interruptions in the playback of multimedia content in Wi-Fi environments with high density of users. Results prove that the proposed solution reduces both the number and duration of stalls at the expense of decreasing the average representation of the playback., Este trabajo ha sido subvencionado por el Programa PAID10-18 así como por el Proyecto Línea de I+D+i Tecnologías de distribución y procesado de información multimedia y QoE de la Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Numerical Study of a Radial Turbine of Variable Geometry at Off-Design Conditions Reaching Choked Flow

  • Echavarria-Olaya, Juan David|||0000-0002-9611-0751
[ES] En los turbocompresores con turbina de geometría variable (VGT por sus siglas en inglés) los vanos del estator se mueven a una posición cerrada para generar una contrapresión durante el modo de frenado del motor. De este modo, se generan ondas de choque en el estator. Además, en otras aplicaciones donde se utilizan turbinas radiales como en ciclos reversos de Brayton para refrigeración, ciclos orgánicos Rankine, y en las turbinas para la unidad de potencia auxiliar, dependiendo de las condiciones de operación, pueden aparecer condiciones sónicas y ondas de choque. El presente trabajo se centra en el estudio del comportamiento del flujo a través de una turbina de geometría variable de un turbocompresor comercial en condiciones fuera de diseño alcanzando condiciones de choque. Se ha realizado un análisis detallado del patrón de flujo dentro de la turbine usando simulaciones CFD, identificando y cuantificando los fenómenos más importantes bajo diferentes condiciones de operación. Se han llevado a cabo simulaciones estacionarias usando Reynolds Averaged Navier Stokes (RANS) y no estacionarias (unsteady RANS) para obtener las características del flujo en el estator y en el rotor, además de obtener el mapa de la turbina. Los resultados CFD muestran que la región del dominio computacional donde aparecen las condiciones sónicas depende de la posición de los vanos del estator y la relación de presiones. Cuando los vanos del estator están en una posición cerrada (10% VGT), el fluido se acelera y, dependiendo de la relación de presiones, la presión estática en el lado de succión disminuye hasta cierto punto donde un incremento repentino revela la presencia de una onda de choque, la cual se expande por el espacio sin vanos. La intensidad de la onda de choque bajo la relación de presiones más altas varia con la velocidad de giro. Para analizar la interacción entre el rotor y el estator se llevaron a cabo simulaciones numéricas con los vanos del estator en una posición cerrada, 10% VGT, y en una posición más abierta, 30% VGT. El número de choques que una partícula del fluido experimenta aguas arriba del rotor está correlacionado con las pérdidas por choque del fluido. Cerca de los vanos del estator, las pérdidas de presión son altas, hacia el centro del espacio sin vanos las pérdidas disminuyen y cerca del rotor empiezan a incrementar. La interacción entre el rotor y el estator crea ondas de choque cuya intensidad depende de la posición del borde de ataque del rotor y de la velocidad de giro. A la velocidad de giro más alta, ocurren fluctuaciones en la carga cerca del borde de ataque, las cuales pueden comprometer la integridad de la pala. Cuando la turbina tiene los vanos del estator abiertos (80% VGT) y opera a la relación de presión más alta seleccionada, las condiciones de choque aparecen en el plano del borde de fuga del rotor. Además, el desarrollo del área chocada depende de la velocidad de giro y de las fugas en la punta del álabe. Así, se investigó los efectos de las fugas en la punta del alabe sobre el flujo principal bajo condiciones sónicas disminuyendo e incrementando el intersticio entre la punta del álabe y la carcasa hasta un 50% en base a la geometría dada por el fabricante. El flujo a través de este espacio se acelera para posteriormente mezclarse con el flujo principal y generar un vórtice. Los efectos del vórtice sobre el flujo en el plano ubicado en el borde de fuga del rotor cuando el intersticio varía son más significativos a altas velocidades que a bajas velocidades. El vórtice permanece más cerca del lado de succión a altas velocidades generando una región subsónica que incrementa con la altura del intersticio. Las fugas en la punta del álabe no afectan al flujo principal cerca del cubo cuando la turbina opera a altas y bajas velocidades., [CA] En turbocompressors amb turbina de geometria variable (VGT per les seues sigles en anglès), les paletes de l'estàtor es mouen a una posició tancada per generar una contrapressió durant el mode de frenada del motor. D'aquesta forma, es generen unes ones de xoc en l'estàtor. A més, en altres aplicacions on s'utilitzen turbines radials com els cicles inversos de Brayton per a refrigeració, cicles orgànics de Rankine o en turbines per a la unitat de potencia auxiliar, depenent de les condicions d'operació poden aparéixer condicions sòniques i d'ones de xoc. El present treball es centra en l'estudi del comportament del flux en una turbina radial de geometria variable d'un turbocompressor comercial en condicions fora de disseny, arribant a condicions de xoc. S'ha realitzat un anàlisi detallat del patró de flux dins d'aquestes turbines utilitzant simulacions CFD, identificant i quantificant els fenòmens més importants a diferents condicions d'operació. S'han realitzat simulacions estacionàries utilitzant Reynolds Averaged Navier Stokes (RANS) i no estacionàries (Unsteady-RANS) per a obtenir les característiques del flux en l'estàtor i en el rotor, a més d'obtenir el mapa de la turbina. Els resultats CFD mostren que la regió del domini computacional on apareixen les condicions sòniques depenen de la posició de les paletes de l'estàtor i de la relació de pressions. Quan les paletes de l'estàtor estan en una posició tancada (10% VGT), el flux s'accelera i, depenent de la relació de pressions, la pressió estàtica en el costat de succió disminueix fins a cert punt on un increment brusc denota la presència d'una ona de xoc que s'expandix per l'espai sense paletes. L'intensitat de la ona de xoc a relacions de pressions elevades varia amb la velocitat de rotació. Per analitzar l'interacció entre rotor i estàtor es van realitzar simulacions numèriques amb les paletes de l'estàtor en una posició tancada, 10% VGT, i en una posició més oberta, 30% VGT. El nombre de xocs que una partícula del fluid experimenta aigües amunt del rotor està correlacionat amb les pèrdues per xoc del fluid. Prop de les paletes de l'estàtor, les pèrdues de pressión són elevades, cap al centre de l'espai sense paletes les pèrdues disminueixen i prop del rotor comencen a incrementarse. L'interacción entre rotor i estàtor crea ones de xoc amb una intensitat que depèn de la posició de la vora d'atac del rotor i de la velocitat de rotació. A la velocitat de rotació més elevada, prop de de la vora d'atac ocorren fluctuacions en la càrrega que poden comprometre la integritat de la pala. Quan la turbina té les paletes de l'estàtor obertes (80% VGT) i opera a la relació de pressió més elevada de les seleccionades, les condicions de xoc apareixen en el pla de la vora de fuga del rotor. A més, el desenvolupament de l'àrea xocada depèn de la velocitat de rotació i de les fugues en la punta de les paletes. Així, s'ha investigat els efectes de les fugues en la punta de les paletes sobre el flux principal sota condicions sòniques, disminuint i incrementant l'interstici entre la punta de la paleta i la carcasa fins un 50\% en base a la geometria donada pel fabricant. El flux en aquest espai s'accelera per a posteriorment mesclar-se amb el flux principal i generar un vòrtex. Els efectes del vòrtex sobre el flux en el pla ubicat a la vora de fuga del rotor quan l'interstici varia són més significatives a velocitats altes que a velocitats baixes. El vòrtex roman més prop del costat de succió a velocitats elevades generant una regió subsònica que incrementa amb l'altura de l'interstici. Les fugues en la punta de les paletes no afecten al flux principal prop del cub quan la turbina opera tant a altes com baixes velocitats., [EN] In turbochargers with variable geometry turbine (VGT), the stator vanes move to a closed position to drive high exhaust back pressure during the engine braking mode. Thus, shock waves are generated at the stator. Furthermore, depending on the operational conditions in the use of radial turbines in other applications like reverse Brayton cycle for refrigeration, Organic Rankine Cycles, and gas turbine auxiliary power unit (GTAPU), sonic flow and shock waves can appear. The current work focuses on studying the flow behavior of a commercial turbocharger turbine of variable geometry at off-design conditions reaching choked flow. A detailed examination of the flow patterns within the turbine has been carried out using CFD simulations, identifying and quantifying the most important phenomena under different operational points. Reynolds Averaged Navier Stokes (RANS) and unsteady RANS simulations have been performed to obtain the flow structures in stator and rotor as well as the turbine map. The CFD results show that the region of the computational domain where the sonic conditions appear depends on the stator vanes position and the pressure ratio. When the stator vanes are in the closed position (10% VGT) the flow through the stator accelerates and, depending on pressure ratio, the static pressure on the suction side decreases until a certain point where a sudden increase reveals the presence of a shock wave that expands through the vaneless space. The intensity of the shock wave at higher pressure ratio varies with the rotational speed. To analyze the rotor-stator interaction, numerical simulations were carried out with the stator vanes at the closed position, 10% VGT, and at wider position, 30% VGT. The number of shocks a fluid particle experiences upstream of the rotor is correlated with the fluid shock losses. Close to the stator vanes, the pressure losses are high; toward the center of the vaneless space, they start to decrease, and close to the rotor they start to increase. The rotor-stator interaction creates shock waves, whose intensity depends on the position of the rotor leading edge and the blade speed. At higher rotational speed, load fluctuation occurs close to the leading edge, which may compromise the blade's integrity. When the turbine has the stator vanes open (80% VGT) and operates at the selected higher pressure ratio, the choking condition appears in a plane at the rotor trailing edge. Furthermore, the development of the choked area depends on the rotational speed and tip leakage. Thus, the effect of the tip leakage flow on the main flow under sonic conditions was investigated decreasing and increasing the tip gap up to 50% of the original geometry given by the manufacturer. The flow through the gap accelerates and then mixes with the main flow, generating a vortex. The effects of the vortex on the flow at the rotor trailing edge plane when the tip gap varies are more significant at higher speed than at lower speed. The vortex stays closer to the tip suction side at higher speed, generating a subsonic region that increases with the tip gap height. At higher and lower rotational speeds, the tip leakage flow does not affect the main flow close to the hub., I would like to acknowledge the financial support received through the "Subprograma de Formación de Profesorado Universitario (FPU)". Ministerio de Universidades. FPU18/02628 and by the "FPI Subprograma 2". Universitat Politècnica de València. PAID-10-18.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Eel sperm cryopreservation: an overview

  • Herranz-Jusdado, Juan Germán
  • Morini, Marina
  • Rozenfeld, Christoffer
  • Müller, T.
  • Horváth, Ákos
  • Ohta, H.
  • Gallego Albiach, Victor|||0000-0002-9733-0625
  • Pérez Igualada, Luz María|||0000-0002-6678-7446
  • Asturiano, Juan F.|||0000-0002-6441-5294
[EN] The eels are teleost fishes from the order Anguilliformes that includes several species with high commercial value. Due to the high interest for aquaculture production of some eel species and for the need to restore eel species that are endangered, several research groups have directed their research toward developing protocols to cryopreserve the spermatozoa of Japanese eel (Anguilla japonica) and European eel (Anguilla anguilla). In this review, we provide an overview on the different protocols that have been developed so far. The first developed protocols used DMSO as cryoprotectant in both species with good success, obtaining sperm motilities of over 45% in Japanese eel and over 35% in European eel. Moreover, sperm cryopreserved using DMSO was successfully used in fertilization trials, although with low fertilization rates. However, recent studies show that DMSO produce epigenetic changes in eel sperm and therefore, the last developed protocols used methanol as cryoprotectant instead. Cryopreservation protocols using methanol as cryoprotectant, showed improved motility values in both Japanese and European eel. In addition, the latest protocols have been adapted to cryopreserve larger volumes of sperm of up to 5¿mL, which is useful for larger scale fertilization trials. The present study introduces the state of the art and future perspectives of the eel sperm cryopreservation to be applied in aquaculture and biological conservation programs., Funded by the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement N 642893 (IMPRESS), including the JGHJ and CR pre-doctoral contracts. MM has a postdoc grant from the UPV (PAID -10-18). VG has a postdoc grant from the MICIU (Juan de la CiervaIncorporacion; IJCI-2017-34200). This research was supported by the Higher Education Institutional Excellence Program (1783-3/2018/FEKUTSRAT) awarded by the Ministry of Human Capacities of Hungary within the framework of water related researches of Szent Istvan University as well as the EFOP-3.6.3-VEKOP-16-2017-00008 project co-financed by the European Union and the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Detection, molecular characterisation and aspects involving the transmission of tomato chlorotic dwarf viroid in eggplant

  • Gramazio, Pietro|||0000-0003-2226-7999
  • Lerma Lerma, María Dolores|||0009-0003-5404-1609
  • Villanueva-Párraga, Gloria|||0000-0002-1475-2882
  • Vilanova Navarro, Santiago|||0000-0003-4939-9713
  • Figás-Moreno, María Del Rosario
  • Arrones-Olmo, Andrea|||0000-0003-3926-0291
  • San Bautista Primo, Alberto|||0000-0003-4846-6611
  • Soler Aleixandre, Salvador|||0000-0001-8325-3326
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • García-Fortea, Edgar
  • Mangino, Giulio
  • Alonso-Martín, David
[EN] Tomato chlorotic dwarf viroid (TCDVd) is a pospiviroid that causes severe disease symptoms in tomato. TCDVd is also naturally found in other crops and plants, in most occasions being asymptomatic. Apart from the natural hosts reported up to now, artificial inoculations have revealed that TCDVd can infect other plants, including eggplant (Solanum melongena). In a screening of seedlings of eggplant from a breeding programme we detected a pospiviroid, which we identified as TCDVd, representing the first report of natural infection of eggplant by TCDVd. The new TCDVd isolate of eggplant was detected by reverse transcription polymerase chain reaction (RT¿PCR) using primers TG21/CT20, initially designed to detect potato spindle tuber viroid. The new isolate sequence is close to a Brugmansia sanguinea isolate of TCDVd from the Netherlands, and most of the nucleotidic changes with respect to this isolate and to the reference genome sequence of TCDVd are found in the TR region. Naturally infected plants of eggplant with this TCDVd isolate did not display any disease symptoms. We demonstrated that in eggplant TCDVd is mechanically transmitted with low to moderate efficiency with cultivation practices, but not by plant¿to¿plant contact. Tomato plants artificially inoculated with the eggplant isolate of TCDVd tested positive for the presence of the viroid at 50¿days after inoculation, but did not display any disease symptoms. Seed transmission to germinated seedlings of eggplant was variable among progenies from infected plants, ranging from 7.7% to 100.0%. Disinfection of seeds with chemical treatments with sodium hypochlorite and trisodium phosphate solutions plus thermotherapy at 80°C for 24¿hr or 90°C for 6 hr was ineffective in reducing the rate of transmission by seed. We did not find evidence of horizontal transmission of TCDVd by pollen, but vertical transmission was highly efficient when healthy eggplant plants were pollinated with infected pollen. Our results indicate that asymptomatic infection of eggplant by TCDVd and high seed and pollen transmission rates may contribute to the spread of this viroid. The information we obtained is useful in order to implement measures for the prevention, control and eradication of TCDVd in eggplant crops, as well as to avoid their transmission to other hosts., P.G. is grateful to Universitat Politècnica de València and to Japan Society for the Promotion of Science for their respective postdoctoral grants (PAID-10-18 and FY2019 JSPS Postdoctoral Fellowship for Research in Japan [Standard]). A.A. and D.A. are grateful to Universitat Politècnica de València for their respective predoctoral (PAID-01-18 and PAID-01-16) contracts within the Programa de Ayudas de Investigación y Desarrollo initiative. E.G.-F. is grateful to Ministerio de Educación, Cultura y Deporte para la Formación de Profesorado Universitario for a predoctoral grant (FPU17/02389). G.M. is grateful to Generalitat Valenciana for a predoctoral grant within the Santiago Grisolía programme (GRISOLIAP/2016/012). M.P. is grateful to Generalitat Valenciana and Fondo Social Europeo for a postdoctoral grant (APOSTD/2018/014).
O2, repositorio institucional de la UOC
Publication Contribución de congreso (ConferenceOutput)

Smartphones, apps and older people's interests: from a generational perspective

  • Rosales, Andrea
  • Fernández-Ardèvol, Mireia
It is well-documented that ICT are designed mostly with young users in mind. In addition, most studies about smartphone use do not include older people or even consider age differences. Consequently, little is known about how to design smartphone apps taking older people’s interests into account. We have used a mixed-method approach with an intergenerational perspective to approach this topic. First, we track the smartphone activities of 238 panelists. Second, we conduct an online survey (382 respondents). Third, we document the experiences of a group of older people in a smartphone learning club. We have found specific media consumption and communication patterns among older individuals: for example, at home they are more prone to jumping between devices for ergonomic reasons, thus, cross-device interactions are key for this group. We discuss the relevance of intergenerational studies in counterbalancing the spread of age stereotypes and identifying alternative adoption trends.
O2, repositorio institucional de la UOC
Publication Artículo científico (JournalArticle)

Old age is also a time for change: trends in news intermediary preferences among internet users in Canada and Spain

  • Rosales, Andrea
  • Fernández-Ardèvol, Mireia
  • Gomez-Leon, Madelin
  • Jacobetty, Pedro
The social distancing imposed by the Covid-19 pandemic accelerated the digitalisation of societies, which also influenced habits related to the consumption and dissemination of news. In this context, older individuals are often blamed for contributing to disinformation, which is associated with the echo chambers fostered by social media. Mass media, social media and personal communication tools act as mass, social or personal intermediaries when it comes to keeping up to date with the news. This paper analyses the preferred intermediaries of older online adults (aged 60 and over) for following the news and how they change over time. We analysed two waves of an online survey-based longitudinal study conducted in Canada and Spain, before Covid-19 pandemic (2016/17), and during Covid-19 (in 2020). We found that most participants exclusively use mass intermediaries or combine mass with social and personal intermediaries to keep abreast of the news. However, only 28% of respondents inform themselves exclusively through the alleged echo chambers of social and personal intermediaries. Results also show that media ecologies evolve in different directions, and, despite the forced digitalisation driven by the pandemic, digital media usage did not always increase or evolve towards newer technologies. This paper contributes to understanding the diverse intermediaries used by older adults to obtain news and how such media ecologies can contribute to contrasting different sources of information beyond the alleged echo chambers of social media.
Docta Complutense
Publication Artículo científico (JournalArticle)

Combination therapy with an angiotensin II receptor blocker and an HMG-CoA reductase inhibitor in experimental subtotal nephrectomy

  • Álvarez Prats, Alejandro
  • Hernández Perera, Octavio
  • Díaz Herrera, Pilar
  • Ucero Herrería, Álvaro Conrado
  • Anabitarte Prieto, Aránzazu
  • Losada Cabrera, Antonio
  • Ortiz, Alberto
  • Rodríguez Pérez, José C.
Background Angiotensin receptor 1 blockers (ARB) are standard nephroprotective drugs in chronic kidney disease. There is less evidence for a nephroprotective effect of HMG-CoA reductase inhibitors (statins) and much less is known about potential benefits of combination therapy. We evaluated the therapeutic potential of a statin alone or in combination with an ARB in experimental chronic kidney disease. Methods Subtotally nephrectomized (5/6 Nx) rats were treated early with vehicle, losartan, cerivastatin or losartan/cerivastatin. Expression of messenger RNA (mRNA) was assessed by real-time reverse transcription–polymerase chain reaction. Tissue proteins were localized by immunohistochemistry. Nuclear factor-κB (NF-κB) activation was measured in whole kidneys. Results In contrast to the sham group, at 6 weeks, vehicle-treated 5/6 Nx rats displayed renal lesions, albuminuria and increased blood pressure, serum creatinine and total kidney NF-κB p65 DNA-binding activity and preproendothelin-1, fibronectin and type I and III collagen mRNA. NF-κB activation correlated with albuminuria and histological renal injury. Losartan or combination therapy preserved renal function, abrogated albuminuria and improved glomerular and interstitial histology. Cerivastatin alone preserved renal function and improved interstitial injury but did not influence albuminuria, glomerular histology or NF-κB activation. Losartan/cerivastatin normalized kidney NF-κB activation and extracellular matrix mRNA expression pattern. The effect of losartan alone on these parameters was less intense. All treatments decreased preproendothelin-1 mRNA and preserved interstitial capillaries. Conclusions In a chronic kidney disease model, early treatment with either an ARB or a statin preserved renal function although the mechanisms differed. Combination therapy with an ARB and a statin did not confer clear-cut advantages on biochemical and histological parameters over ARB alone, although it further improved the kidney NF-κB and gene expression profile.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Is systematic training in opioid overdose prevention effective?

  • Espelt, Albert|||0000-0002-8625-4356
  • Bosque Prous, Marina|||0000-0002-8830-8880
  • Folch, Cinta|||0000-0001-8400-2668
  • Sarasa-Renedo, Ana
  • Majó, Xavier|||0000-0003-4338-6014
  • Casabona-Barbarà, Jordi|||0000-0003-4816-5536
  • Brugal, María Teresa|||0000-0003-0580-676X
The objectives were to analyze the knowledge about overdose prevention, the use of naloxone, and the number of fatal overdoses after the implementation of Systematic Training in Overdose Prevention (STOOP) program. We conducted a quasi-experimental study, and held face-to-face interviews before (n = 725) and after (n = 722) implementation of systematic training in two different samples of people who injected opioids attending harm reduction centers. We asked participants to list the main causes of overdose and the main actions that should be taken when witnessing an overdose. We created two dependent variables, the number of (a) correct and (b) incorrect answers. The main independent variable was Study Group: Intervention Group (IG), Comparison Group (CG), Pre-Intervention Group With Sporadic Training in Overdose Prevention (PREIGS), or Pre-Intervention Group Without Training in Overdose Prevention (PREIGW). The relationship between the dependent and independent variables was assessed using a multivariate Poisson regression analysis. Finally, we conducted an interrupted time series analysis of monthly fatal overdoses before and after the implementation of systematic program during the period 2006±2015. Knowledge of overdose prevention increased after implementing systematic training program. Compared to the PREIGW, the IG gave more correct answers (IRR = 1.40;95%CI:1.33± 1.47), and fewer incorrect answers (IRR = 0.33;95%CI:0.25±0.44). Forty percent of people who injected opioids who received a naloxone kit had used the kit in response to an overdose they witnessed. These courses increase knowledge of overdose prevention in people who use opioids, give them the necessary skills to use naloxone, and slightly diminish the number of fatal opioid overdoses in the city of Barcelona.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Thermal conductivity and phonon hydrodynamics in transition metal dichalcogenides from first-principles

  • Torres Alvarez, Pol|||0000-0003-2544-5850
  • Alvarez, F. Xavier|||0000-0001-6746-2144
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Rurali, Riccardo|||0000-0002-4086-4191
We carry out a systematic study of the thermal conductivity of four single-layer transition metal dichalcogenides, MX2 (M = Mo, W; X = S, Se) from first-principles by solving the Boltzmann transport equation (BTE). We compare three different theoretical frameworks to solve the BTE beyond the relaxation time approximation (RTA), using the same set of interatomic force constants computed within density functional theory (DFT), finding that the RTA severely underpredicts the thermal conductivity of MS2 materials. Calculations of the different phonon scattering relaxation times of the main collision mechanisms and their corresponding mean free paths (MFP) allow evaluating the expected hydrodynamic behaviour in the heat transport of such monolayers. These calculations indicate that despite of their low thermal conductivity, the present TMDs can exhibit large hydrodynamic effects, being comparable to those of graphene, especially for WSe2 at high temperatures.