Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graphene-based biosensors: going simple

  • Morales-Narváez, Eden
  • Baptista-Pires, Luis
  • Zamora-Gálvez, Alejandro
  • Merkoçi, Arben
The main properties of graphene derivatives facilitating optical and electrical biosensing platforms are discussed, along with how the integration of graphene derivatives, plastic, and paper can lead to innovative devices in order to simplify biosensing technology and manufacture easy-to-use, yet powerful electrical or optical biosensors. Some crucial issues to be overcome in order to bring graphene-based biosensors to the market are also underscored., The authors acknowledge the support from H2020-EU (INTCATCH Project, Ref. 689341), MINECO (Spain, MAT2014-52485-P, RTC-2014-2619-7 and Severo Ochoa Program, Grant SEV-2013-0295) and Secretaria d'Universitats i Recerca del Departament d'Economia i Coneixement de la Generalitat de Catalunya (2014 SGR 260)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Paper strip-embedded graphene quantum dots: a screening device with a smartphone readout

  • Álvarez-Diduk, Ruslan
  • Orozco, Jahir
  • Merkoçi, Arben
Simple, inexpensive and rapid sensing systems are very demanded for a myriad of uses. Intrinsic properties of emerging paper-based analytical devices have demonstrated considerable potential to fulfill such demand. This work reports an easy-to-use, low cost, and disposable paper-based sensing device for rapid chemical screening with a smartphone readout. The device comprises luminescent graphene quantum dots (GQDs) sensing probes embedded into a nitrocellulose matrix where the resonance energy transfer phenomenon seems to be the sensing mechanism. The GQDs probes were synthesized from citric acid by a pyrolysis procedure, further physisorbed and confined into small wax-traced spots on the nitrocellulose substrate. The GQDs were excited by an UV LED, this, is powered by a smartphone used as both; energy source and imaging capture. The LED was contained within a 3D-printed dark chamber that isolates the paper platform from external light fluctuations leading to highly reproducible data. The cellulose-based device was proven as a promising screening tool for phenols and polyphenols in environmental and food samples, respectively. It opens up new opportunities for simple and fast screening of organic compounds and offers numerous possibilities for versatile applications. It can be especially useful in remote settings where sophisticated instrumentation is not always available., This work was supported by the European Commission Program, H2020-WATER, INTCATCH Project (689341). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). The Nanobiosensors and Bioelectronics Group acknowledges the support from the Generalitat de Cataluña (Grant 2014 SGR 260). R. Alvarez. acknowledges the financial support from the CONACYT (Mexico)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Bioluminescent nanopaper for the fast screening of toxic substances

  • Liu, Jie
  • Bergua, José Francisco
  • Morales-Narváez, Eden
  • Orozco, Jahir
  • Álvarez-Diduk, Ruslan
  • Vincent, Teresa
  • Zhong, Guohua
  • Merkoçi, Arben
Resumen del póster presentado al VIII International Congress on Analytical Nanoscience and Nanotechnology, celebrado en Barcelona (España) del 3 al 5 de julio de 2017., Chemical pollution is widely spread in environment nowadays. Particularly, the uncontrolled use of pesticides in agriculture leads to high-levels of these chemical compounds in water resources. INTCATCH H2020 European project aims to monitor and manage water quality in EU countries through the use of biosensors. In this context, a biosensor for pesticides monitoring has been developed using the luminiscent bacteria Aliivibrio fischeri in combination with a nanopaper-based platform. A. fischeri had previously been used in the ready-to-use kit Microtox ® since 1978 as a bioindicator of toxicity of water samples. However, this methodology requires high-trained personal and expensive laboratory equipment. The use of nanopaper offers several advantages such as biocompatibility, low cost and simple procedure, increasing the sensitivity of the biosensor at the same time. To study its applicability three common-used pesticides were chosen as model analytes: diuron, tributyltin (TBT) and polybrominated diphenyl ethers (PBDE). Results obtained so far as well as some future plans in applying such nanopaper platform combined with mobile phone for simple in-field pesticides monitoring will be presented., INTCATCH H2020 European project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bioluminescent nanopaper for rapid screening of toxic substances

  • Liu, Jie
  • Morales-Narváez, Eden
  • Orozco, Jahir
  • Vicent, Teresa
  • Zhong, Guohua
  • Merkoçi, Arben
Environmental pollution is threatening human health and ecosystems as a result of modern agricultural techniques and industrial progress. A simple nanopaper-based platform coupled with luminescent bacteria Aliivibrio fischeri (A. fischeri) as a bio-indicator is presented here, for rapid and sensitive evaluation of contaminant toxicity. When exposed to toxicants, the luminescence inhibition of A. fischeri-decorated bioluminescent nanopaper (BLN) can be quantified and analyzed to classify the toxicity level of a pollutant. The BLN composite was characterized in terms of morphology and functionality. Given the outstanding biocompatibility of nanocellulose for bacterial proliferation, BLN achieved high sensitivity with a low cost and simplified procedure compared to conventional instruments for laboratory use only. The broad applicability of BLN devices to environmental samples was studied in spiked real matrices (lake and sea water), and their potential for direct and in situ toxicity screening was demonstrated. The BLN architecture not only survives but also maintains its function during freezing and recycling processes, endowing the BLN system with competitive advantages as a deliverable, ready-to-use device for large-scale manufacturing. The novel luminescent bacteria-immobilized, nanocelullose-based device shows outstanding abilities for toxicity bioassays of hazardous compounds, bringing new possibilities for cheap and efficient environmental monitoring of potential contamination., This work was supported by the European Commission Program, H2020-WATER, INTCATCH Project (No. 689341). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). The Nanobiosensors and Bioelectronics Group acknowledges the support from the Generalitat de Cataluña (Grant 2014 SGR 260). Jie Liu acknowledges the support from China Scholarship Council (CSC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Electrochromic molecular imprinting sensor for visual and smartphone-based detections

  • Capoferri, Denise
  • Álvarez-Diduk, Ruslan
  • Del Carlo, Michele
  • Compagnone, Dario
  • Merkoçi, Arben
Electrochromic effect and molecularly imprinted technology have been used to develop a sensitive and selective electrochromic sensor. The polymeric matrices obtained using the imprinting technology are robust molecular recognition elements and have the potential to mimic natural recognition entities with very high selectivity. The electrochromic behavior of iridium oxide nanoparticles (IrOx NPs) as physicochemical transducer together with a molecularly imprinted polymer (MIP) as recognition layer resulted in a fast and efficient translation of the detection event. The sensor was fabricated using screen-printing technology with indium tin oxide as a transparent working electrode; IrOx NPs where electrodeposited onto the electrode followed by thermal polymerization of polypyrrole in the presence of the analyte (chlorpyrifos). Two different approaches were used to detect and quantify the pesticide: direct visual detection and smartphone imaging. Application of different oxidation potentials for 10 s resulted in color changes directly related to the concentration of the analyte. For smartphone imaging, at fixed potential, the concentration of the analyte was dependent on the color intensity of the electrode. The electrochromic sensor detects a highly toxic compound (chlorpyrifos) with a 100 fM and 1 mM dynamic range. So far, to the best of our knowledge, this is the first work where an electrochromic MIP sensor uses the electrochromic properties of IrOx to detect a certain analyte with high selectivity and sensitivity., This work was supported by the European Commission Programme, H2020-WATER, INTCATCH Project (689341). This work is also funded by the CERCA Programme/Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV2013-0295). R.A. acknowledges the financial support from CONACYT (Mexico)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Lateral flow device for water fecal pollution assessment: From troubleshooting of its microfluidics using bioluminescence to colorimetric monitoring of genericEscherichia coli

  • Bergua, José Francisco
  • Hu, Liming
  • Fuentes-Chust, Celia
  • Álvarez-Diduk, Ruslan
  • Hassan, Abdelrahim Hussein Abdelazeem
  • Parolo, Claudio
  • Merkoçi, Arben
Water is the most important ingredient of life. Water fecal pollution threatens water quality worldwide and has direct detrimental effects on human health and the global economy. Nowadays, assessment of water fecal pollution relies on time-consuming techniques that often require well-trained personnel and highly-equipped laboratories. Therefore, faster, cheaper, and easily-used systems are needed toin situmonitor water fecal pollution. Herein, we have developed colorimetric lateral flow strips (LFS) able to detect and quantifyEscherichia colispecies in tap, river, and sewage water samples as an indicator of fecal pollution. The combination of LFS with a simple water filtration unit and a commercially available colorimetric reader enhanced the assay sensitivity and enabled more accurate quantification of bacteria concentration down to 10CFU mLin 10 minutes, yielding recovery percentages between 80% and 90% for all water samples analyzed. Overall, this system allows for monitoring and assessing water quality based onE. colispecies as a standard microbiological indicator of fecal pollution. Furthermore, we have developed a novel bioluminescent, bacteria-based method to quickly characterize the performance of a great variety of LFS materials. This new method allows evaluating the flow rate of big analytes such as bacteria through the LFS materials, as a suggestive means for selecting the appropriate materials for fabricating LFS targeting big analytes (≈2 μm). As a whole, the proposed approach can accelerate and reduce the costs of water quality monitoring and pave the way for further improvement of fecal pollution detection systems., This work was supported by the European Commission Program, H2020-WATER, INTCATCH Project (689341). We acknowledge all the INTCATCH partners for their support during the monitoring campaign in river Ter and the collection of the sewage water samples. ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706). A. H. A. Hassan acknowledges the short-term fellowship (Grant 25347) funded by the Science and Technology Development Fund (STDF), Egypt.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Improved Aliivibrio fischeri based-toxicity assay: Graphene-oxide as a sensitivity booster with a mobile-phone application

  • Bergua, José Francisco
  • Álvarez-Diduk, Ruslan
  • Hu, Liming
  • Hassan, Abdelrahim Hussein Abdelazeem
  • Merkoçi, Arben
Recently, many bioluminescence-based applications have arisen in several fields, such as biosensing, bioimaging, molecular biology, and human health diagnosis. Among all bioluminescent organisms, Aliivibrio fischeri (A. fischeri) is a bioluminescent bacterium used to carry out water toxicity assays since the late 1970s. Since then, several commercial A. fischeri-based products have been launched to the market, as these bacteria are considered as a gold standard for water toxicity assessment worldwide. However, the aforementioned commercial products rely on expensive equipment, requiring several reagents and working steps, as well as high-trained personnel to perform the assays and analyze the output data. For these reasons, in this work, we have developed for the first time a mobile-phone-based sensing platform for water toxicity assessment in just 5 min using two widespread pesticides as model analytes. To accomplish this, we have established new methodologies to enhance the bioluminescent signal of A. fischeri based on the bacterial culture in a solid media and/or using graphene oxide. Finally, we have addressed the biocompatibility of graphene oxide to A. fischeri, boosting the sensitivity of the toxicity assays and the bacterial growth of the lyophilized bacterial cultures for more user-friendly storage., This work was supported by the European Commission Program, H2020-WATER, INTCATCH Project (No. 689341). ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295). The Nanobiosensors and Bioelectronics Group acknowledges the support from the Generalitat de Cataluña (Grant 2014 SGR 260). R.A. acknowledge the financial support from the EU Graphene Flagship Core 3 Project (No. 881603).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

An innovative autonomous robotic system for on-site detection of heavy metal pollution plumes in surface water

  • Vito-Francesco, Elisabetta de
  • Farinelli, Alessandro
  • Yang, Qiuyue
  • Nagar, Bhawna
  • Álvarez, Rafael
  • Merkoçi, Arben
  • Knutz, Thorsten
  • Haider, Alexander
  • Stach, Wolfgang
  • Ziegenbalg, Falko
  • Allabashi, Roza
Smart monitoring has been studied and developed in recent years to create faster, cheaper, and more user-friendly on-site methods. The present study describes an innovative technology for investigative monitoring of heavy metal pollution (Cu and Pb) in surface water. It is composed of an autonomous surface vehicle capable of semiautonomous driving and equipped with a microfluidic device for detection of heavy metals. Detection is based on the method of square wave anodic stripping voltammetry using carbon-based screen-printed electrodes (SPEs). The focus of this work was to validate the ability of the integrated system to perform on-site detection of heavy metal pollution plumes in river catchments. This scenario was simulated in laboratory experiments. The main performance characteristics of the system, which was evaluated based on ISO 15839 were measurement bias (Pb 75%, Cu 65%), reproducibility (in terms of relative standard deviation: Pb 11–18%, Cu 6–10%) and the limit of detection (4 µg/L for Pb and 7 µg/L for Cu). The lowest detectable change (LDC), which is an important performance characteristic for this application, was estimated to be 4–5 µg/L for Pb and 6–7 µg/L for Cu. The life span of an SPE averaged 39 measurements per day, which is considered sufficient for intended monitoring campaigns. This work demonstrated the suitability of the integrated system for on-site detection of Pb and Cu emissions from large and medium urban areas discharging into small water bodies., Open access funding provided by University of Natural Resources and Life Sciences Vienna (BOKU). The research leading to the presented results received funding from the research project INTCATCH 2020, “Development and application of Novel, Integrated Tools for monitoring and managing Catchments” supported by the European Union’s Horizon 2020 research and innovation programme, under the grant agreement No. 689341. The ICN2 is funded by the CERCA Programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa program of the Spanish Ministry of Economy, Industry, and Competitiveness (MINECO, Grant No. SEV-2017–0706).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Low-Cost, User-Friendly, All-Integrated Smartphone-Based Microplate Reader for Optical-Based Biological and Chemical Analyses

  • Bergua, José Francisco
  • Álvarez-Diduk, Ruslan
  • Idili, Andrea
  • Parolo, Claudio
  • Maymó i Camós, Marc
  • Hu, Liming
  • Merkoçi, Arben
The quantitative detection of different molecular targets is of utmost importance for a variety of human activities, ranging from healthcare to environmental studies. Bioanalytical methods have been developed to solve this and to achieve the quantification of multiple targets from small volume samples. Generally, they can be divided into two different classes: point of care (PoC) and laboratory-based approaches. The former is rapid, low-cost, and user-friendly; however, the majority of the tests are semiquantitative, lacking in specificity and sensitivity. On the contrary, laboratory-based approaches provide high sensitivity and specificity, but the bulkiness of experimental instruments and complicated protocols hamper their use in resource-limited settings. In response, here we propose a smartphone-based device able to support laboratory-based optical techniques directly at the point of care. Specifically, we designed and fabricated a portable microplate reader that supports colorimetric, fluorescence, luminescence, and turbidity analyses. To demonstrate the potential of the device, we characterized its analytical performance by detecting a variety of relevant molecular targets (ranging from antibodies, toxins, drugs, and classic fluorophore dyes) and we showed how the estimated results are comparable to those obtained from a commercial microplate reader. Thanks to its low cost (<$300), portability (27 cm [length] × 18 cm [width] × 7 cm [height]), commercially available components, and open-source-based system, we believe it represents a valid approach to bring high-precision laboratory-based analysis at the point of care., ICN2 is funded by CERCA programme, Generalitat de Catalunya. Grant SEV-2017-0706 funded by MCIN/AEI/10.13039/501100011033. The authors acknowledge Consejo Superior de Investigaciones Científicas (CSIC) for the project “COVID19-122” granted in the call “Nuevas ayudas extraordinarias a proyectos de investigación en el marco de las medidas urgentes extraordinarias para hacer frente al impacto económico y social del COVID-19 (Ayudas CSIC-COVID-19)” and the research project INTCATCH 2020, Development and application of novel, integrated tools for monitoring and managing catchments supported by the European Union’s Horizon 2020 research and innovation program (Grant 689341). The authors also acknowledge the project MAT2017-87202-P funded by MCIN/AEI/10.13039/501100011033/and FEDER Una manera de hacer Europa. R.A.-D. acknowledges funding from the European Union Horizon2020 Programme under Grant No. 881603 (Graphene Flagship Core 3). A.I. was supported by PROBIST postdoctoral fellowship funded by the European Research Council (Marie Skłodowska-Curie grant agreement no. 754510).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Straightforward Immunosensing Platform Based on Graphene Oxide-Decorated Nanopaper, A Highly Sensitive and Fast Biosensing Approach

  • Cheeveewattanagul, Nopchulee
  • Morales-Narváez, Eden|||0000-0002-1536-825X
  • Hassan, Abdel-Raim H. A.|||0000-0001-7905-6821
  • Bergua Canudo, José Francisco|||0000-0002-5969-193X
  • Surareungchai, Werasak
  • Somasundrum, Mithran
  • Merkoçi, Arben|||0000-0003-2486-8085
Immunoassays are nowadays a crucial tool for diagnostics and drug development. However, they often involve time-consuming procedures and need at least two antibodies in charge of the capture and detection processes, respectively. This study reports a nanocomposite based on graphene oxide-coated nanopaper (GONAP) facilitating an advantageous immunosensing platform using a single antibody and without the need for washing steps. The hydrophilic, porous, and photoluminescence-quenching character of GONAP allows for the adsorption and quenching of photoluminescent quantum dots nanocrystals complexed with antibodies (Ab-QDs), enabling a ready-to-use immunosensing platform. The photoluminescence is recovered upon immunocomplex (antibody-antigen) formation which embraces a series of interactions (hydrogen bonding, electrostatic, hydrophobic, and Van der Waals interactions) that trigger desorption of the antigen-Ab-QD complex from GONAP surface. However, the antigen is then attached onto the GONAP surface by electrostatic interactions leading to a spacer (greater than ≈20 nm) between Ab-QDs and GONAP and thus hindering nonradiative energy transfer. It is demonstrated that this simple-yet highly sensitive-platform represents a virtually universal immunosensing approach by using small-sized and big-sized targets as model analytes, those are, human-IgG protein and Escherichia coli bacteria. In addition, the assay is proved effective in real matrices analysis, including human serum, poultry meat, and river water. GONAP opens the way to conceptually new paper-based devices for immunosensing, which are amenable to point of care applications and automated diagnostics.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Paper strip-embedded graphene quantum dots, a screening device with a smartphone readout

  • Álvarez Diduk, Ruslan|||0000-0002-9876-1574
  • Orozco, Jahir|||0000-0001-6249-8092
  • Merkoçi, Arben|||0000-0003-2486-8085
Simple, inexpensive and rapid sensing systems are very demanded for a myriad of uses. Intrinsic properties of emerging paper-based analytical devices have demonstrated considerable potential to fulfill such demand. This work reports an easy-to-use, low cost, and disposable paper-based sensing device for rapid chemical screening with a smartphone readout. The device comprises luminescent graphene quantum dots (GQDs) sensing probes embedded into a nitrocellulose matrix where the resonance energy transfer phenomenon seems to be the sensing mechanism. The GQDs probes were synthesized from citric acid by a pyrolysis procedure, further physisorbed and confined into small wax-traced spots on the nitrocellulose substrate. The GQDs were excited by an UV LED, this, is powered by a smartphone used as both; energy source and imaging capture. The LED was contained within a 3D-printed dark chamber that isolates the paper platform from external light fluctuations leading to highly reproducible data. The cellulose-based device was proven as a promising screening tool for phenols and polyphenols in environmental and food samples, respectively. It opens up new opportunities for simple and fast screening of organic compounds and offers numerous possibilities for versatile applications. It can be especially useful in remote settings where sophisticated instrumentation is not always available.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Bioluminescent nanopaper for rapid screening of toxic substances

  • Liu, Jie
  • Morales-Narváez, Eden|||0000-0002-1536-825X
  • Orozco, Jahir|||0000-0001-6249-8092
  • Vicent i Huguet, Teresa|||0000-0002-6547-7358
  • Zhong, Guohua
  • Merkoçi, Arben|||0000-0003-2486-8085
Environmental pollution is threatening human health and ecosystems as a result of modern agricultural techniques and industrial progress. A simple nanopaper-based platform coupled with luminescent bacteria Aliivibrio fischeri (A. fischeri) as a bio-indicator is presented here, for rapid and sensitive evaluation of contaminant toxicity. When exposed to toxicants, the luminescence inhibition of A. fischeri-decorated bioluminescent nanopaper (BLN) can be quantified and analyzed to classify the toxicity level of a pollutant. The BLN composite was characterized in terms of morphology and functionality. Given the outstanding biocompatibility of nanocellulose for bacterial proliferation, BLN achieved high sensitivity with a low cost and simplified procedure compared to conventional instruments for laboratory use only. The broad applicability of BLN devices to environmental samples was studied in spiked real matrices (lake and sea water), and their potential for direct and in situ toxicity screening was demonstrated. The BLN architecture not only survives but also maintains its function during freezing and recycling processes, endowing the BLN system with competitive advantages as a deliverable, ready-to-use device for large-scale manufacturing. The novel luminescent bacteria-immobilized, nanocelullose-based device shows outstanding abilities for toxicity bioassays of hazardous compounds, bringing new possibilities for cheap and efficient environmental monitoring of potential contamination.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Graphene-based biosensors, going simple

  • Morales-Narváez, Eden|||0000-0002-1536-825X
  • Baptista Pires, Luis Miguel|||0000-0002-2290-6386
  • Zamora Gálvez, Alejandro
  • Merkoçi, Arben|||0000-0003-2486-8085
The main properties of graphene derivatives facilitating optical and electrical biosensing platforms are discussed, along with how the integration of graphene derivatives, plastic, and paper can lead to innovative devices in order to simplify biosensing technology and manufacture easy-to-use, yet powerful electrical or optical biosensors. Some crucial issues to be overcome in order to bring graphene-based biosensors to the market are also underscored.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Electrochromic molecular imprinting sensor for visual and smartphone-based detections

  • Capoferri, Denise|||0000-0003-4111-3717
  • Álvarez Diduk, Ruslan|||0000-0002-9876-1574
  • Del Carlo, Michele|||0000-0003-0431-662X
  • Compagnone, Dario|||0000-0001-7849-8943
  • Merkoçi, Arben|||0000-0003-2486-8085
Electrochromic effect and molecularly imprinted technology have been used to develop a sensitive and selective electrochromic sensor. The polymeric matrices obtained using the imprinting technology are robust molecular recognition elements and have the potential to mimic natural recognition entities with very high selectivity. The electrochromic behavior of iridium oxide nanoparticles (IrOx NPs) as physicochemical transducer together with a molecularly imprinted polymer (MIP) as recognition layer resulted in a fast and efficient translation of the detection event. The sensor was fabricated using screen-printing technology with indium tin oxide as a transparent working electrode; IrOx NPs where electrodeposited onto the electrode followed by thermal polymerization of polypyrrole in the presence of the analyte (chlorpyrifos). Two different approaches were used to detect and quantify the pesticide: direct visual detection and smartphone imaging. Application of different oxidation potentials for 10 s resulted in color changes directly related to the concentration of the analyte. For smartphone imaging, at fixed potential, the concentration of the analyte was dependent on the color intensity of the electrode. The electrochromic sensor detects a highly toxic compound (chlorpyrifos) with a 100 fM and 1 mM dynamic range. So far, to the best of our knowledge, this is the first work where an electrochromic MIP sensor uses the electrochromic properties of IrOx to detect a certain analyte with high selectivity and sensitivity.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Graphene Oxide-Poly(dimethylsiloxane)-Based Lab-on-a-Chip Platform for Heavy-Metals Preconcentration and Electrochemical Detection

  • Chałupniak, Andrzej
  • Merkoçi, Arben|||0000-0003-2486-8085
Herein, we present the application of a novel graphene oxide-poly(dimethylsiloxane) (GO-PDMS) composite in reversible adsorption/desorption, including detection of heavy metals. GO-PDMS was fabricated by simple blending of GO with silicon monomer in the presence of tetrahydrofuran, followed by polymerization initiated upon the addition of curing agent. We found GO concentration, curing agent concentration, pH, and contact time among the most important factors affecting the adsorption of Pb(II) used as a model heavy metal. The mechanism of adsorption is based on surface complexation, where oxygen active groups of negative charge can bind with bivalent metal ions Me(II). To demonstrate a practical application of this material, we fabricated microfluidic lab-on-a-chip platform for heavy-metals preconcentration and detection. This device consists of a screen-printed carbon electrode, a PDMS chip, and a GO-PDMS chip. The use of GO-PDMS preconcentration platform significantly improves the sensitivity of electrochemical detection of heavy metals (an increase of current up to 30× was observed), without the need of modifying electrodes or special reagents addition. Therefore, samples being so far below the limit of detection (0.5 ppb) were successfully detected. This approach is compatible also with real samples (seawater) as ionic strength was found as indifferent for the adsorption process. To the best of our knowledge, GO-PDMS was used for the first time in sensing application. Moreover, due to mechanical resistance and outstanding durability, it can be used multiple times unlike other GO-based platforms for heavy-metals adsorption.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Development of a heavy metal sensing boat for automatic analysis in natural waters utilizing anodic stripping voltammetry

  • Yang, Qiuyue|||0000-0002-7693-6679
  • Nagar, Bhawna|||0000-0003-2363-9758
  • Álvarez Diduk, Ruslan|||0000-0002-9876-1574
  • Balsells, Marc|||0000-0001-6475-1514
  • Farinelli, Alessandro
  • Bloisi, Domenico
  • Proia, Lorenzo|||0000-0002-7212-7698
  • Espinosa, Carmen
  • Ordeix, Marc
  • Knutz, Thorsten
  • De Vito-Francesco, Elisabetta|||0000-0003-1123-2336
  • Allabashi, Roza
  • Merkoçi, Arben|||0000-0003-2486-8085
Determination of the levels of heavy metal ions would support assessment of sources and pathways of water pollution. However, traditional spatial assessment by manual sampling and off-site detection in the laboratory is expensive and time-consuming and requires trained personnel. Aiming to fill the gap between on-site automatic approaches and laboratory techniques, we developed an autonomous sensing boat for on-site heavy metal detection using square-wave anodic stripping voltammetry. A fluidic sensing system was developed to integrate into the boat as the critical sensing component and could detect ≤1 μg/L Pb, ≤6 μg/L Cu, and ≤71 μg/L Cd simultaneously in the laboratory. Once its integration was completed, the autonomous sensing boat was tested in the field, demonstrating its ability to distinguish the highest concentration of Pb in an effluent of a galena-enriched mine compared to those at other sites in the stream (Osor Stream, Girona, Spain).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

An innovative autonomous robotic system for on-site detection of heavy metal pollution plumes in surface water

  • De Vito-Francesco, Elisabetta|||0000-0003-1123-2336
  • Farinelli, Alessandro
  • Yang, Qiuyue|||0000-0002-7693-6679
  • Nagar, Bhawna|||0000-0003-2363-9758
  • Álvarez Diduk, Ruslan|||0000-0002-9876-1574
  • Merkoçi, Arben|||0000-0003-2486-8085
  • Knutz, Thorsten
  • Haider, Alexander
  • Stach, Wolfgang
  • Ziegenbalg, Falko
  • Allabashi, Roza
Smart monitoring has been studied and developed in recent years to create faster, cheaper, and more user-friendly on-site methods. The present study describes an innovative technology for investigative monitoring of heavy metal pollution (Cu and Pb) in surface water. It is composed of an autonomous surface vehicle capable of semiautonomous driving and equipped with a microfluidic device for detection of heavy metals. Detection is based on the method of square wave anodic stripping voltammetry using carbon-based screen-printed electrodes (SPEs). The focus of this work was to validate the ability of the integrated system to perform on-site detection of heavy metal pollution plumes in river catchments. This scenario was simulated in laboratory experiments. The main performance characteristics of the system, which was evaluated based on ISO 15839 were measurement bias (Pb 75%, Cu 65%), reproducibility (in terms of relative standard deviation: Pb 11-18%, Cu 6-10%) and the limit of detection (4 µg/L for Pb and 7 µg/L for Cu). The lowest detectable change (LDC), which is an important performance characteristic for this application, was estimated to be 4-5 µg/L for Pb and 6-7 µg/L for Cu. The life span of an SPE averaged 39 measurements per day, which is considered sufficient for intended monitoring campaigns. This work demonstrated the suitability of the integrated system for on-site detection of Pb and Cu emissions from large and medium urban areas discharging into small water bodies.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Low-Cost, User-Friendly, All-Integrated Smartphone-Based Microplate Reader for Optical-Based Biological and Chemical Analyses

  • Bergua Canudo, José Francisco|||0000-0002-5969-193X
  • Álvarez Diduk, Ruslan|||0000-0002-9876-1574
  • Idili, Andrea|||0000-0002-6004-270X
  • Parolo, Claudio|||0000-0001-9481-4408
  • Maymó, M.
  • Hu, Liming|||0000-0002-8666-9287
  • Merkoçi, Arben|||0000-0003-2486-8085
The quantitative detection of different molecular targets is of utmost importance for a variety of human activities, ranging from healthcare to environmental studies. Bioanalytical methods have been developed to solve this and to achieve the quantification of multiple targets from small volume samples. Generally, they can be divided into two different classes: point of care (PoC) and laboratory-based approaches. The former is rapid, low-cost, and user-friendly; however, the majority of the tests are semiquantitative, lacking in specificity and sensitivity. On the contrary, laboratory-based approaches provide high sensitivity and specificity, but the bulkiness of experimental instruments and complicated protocols hamper their use in resource-limited settings. In response, here we propose a smartphone-based device able to support laboratory-based optical techniques directly at the point of care. Specifically, we designed and fabricated a portable microplate reader that supports colorimetric, fluorescence, luminescence, and turbidity analyses. To demonstrate the potential of the device, we characterized its analytical performance by detecting a variety of relevant molecular targets (ranging from antibodies, toxins, drugs, and classic fluorophore dyes) and we showed how the estimated results are comparable to those obtained from a commercial microplate reader. Thanks to its low cost (<