Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 335
Encontrada(s) 4 página(s)

BULERIA. Repositorio Institucional de la Universidad de León
Publication Tesis doctoral (DoctoralThesis)

Control biológico de "Phaeoacremonium minimum" mediante el uso de "Trichoderma" spp. en plantas de vid, Biological control of "Phaeoacremonium minimum" using "Trichoderma" spp. in grapevine plants

  • Carro-Huerga, Guzmán
148 p., [ES] La presente tesis doctoral evalúa la posibilidad de utilizar agentes de control biológico autóctonos para combatir las enfermedades de la madera de la vid. En concreto, el uso de hongos del género "Trichoderma" frente a "Phaeoacremonium minimum", uno de los hongos pioneros de la enfermedad de la yesca y de la enfermedad de Petri. El principal problema a día de hoy es la falta de productos eficaces para combatir estas enfermedades. Esto es debido a la retirada de productos químicos del registro de productos fitosanitarios autorizados para combatir las plagas y enfermedades, motivado por una mayor preocupación por la salud del medio ambiente, del consumidor y de los productores. Las políticas europeas buscan el uso de soluciones ecológicas, sostenibles, adaptadas al cambio climático y respetuosas con la salud animal, humana y del medio ambiente. Sin embargo, hay una falta de consistencia de productos biológicos comerciales y un limitado número de productos químicos que, además, pueden provocar el desarrollo de resistencias en los patógenos. Por tanto, el principal objetivo de esta tesis es buscar soluciones basadas en el agente de biocontrol autóctono "Trichoderma" spp. adaptado a las condiciones de viñedos de la región de Castilla y León. En esta tesis se muestra que el aislado "Trichoderma" sp. T154 fue seleccionado y caracterizado como un agente de biocontrol que está adaptado a las condiciones de esta región y con capacidad de biocontrol frente a "Phaeoacremonium minimum". Además, este microorganismo fue capaz de colonizar las heridas de poda en condiciones de cambio climático y su aplicación fue optimizada con respecto al criterio de salud "One health". Inicialmente, se realizó una prospección de viñedos de Castilla y León. Se utilizó un nuevo método para aislar cepas de "Trichoderma" spp. a partir de corteza de la planta de vid. Se confirmó cómo un menor número de tratamientos fungicidas por campaña y una mayor edad de las plantas de vid favorecen las poblaciones naturales de "Trichoderma", obteniéndose 25 aislamientos de "Trichoderma" de las 10 parcelas muestreadas. Se evaluó la capacidad antagonista de los citados aislamientos mediante ensayos de confrontación dual "in vitro" frente a "Phaeoacremonim minimum" Y038-05-3a, y se seleccionaron los aislados T75, T79, T84 y T154 por su alta capacidad de biocontrol. Seguidamente, el aislado T154 fue utilizado para evaluar los mecanismos de biocontrol que era capaz de utilizar frente al aislado de "Phaeoacremonium minimum" CBS 100398. Este "Trichoderma" autóctono fue transformado mediante la técnica de protoplastos con el fin de expresar la proteína roja tdTom, lo que pertimitió determinar que el micoparasitismo en condiciones "in vitro" y la exclusión de nicho en heridas de planta de vid de la variedad tempranillo fueron los principales mecanismos de biocontrol. Finalmente, la cepa T154 fue evaluada junto con otros aislados autóctonos de "Trichoderma" en distintas condiciones de temperatura, así como se cuantificó su persistencia sobre heridas de poda. Se comprobó que esta cepa era capaz de producir gran cantidad de esporas a 25ºC en condiciones "in vitro", se verificó que era capaz de colonizar las heridas de poda de plantas de vid de tempranillo en condiciones de semicampo durante el invierno, permanecer al menos 12 semanas viable protegiendo la planta, estar adaptado a condiciones simuladas de cambio climático y ser inoculado con criterios de respeto a la salud "One health". Por tanto, las implicaciones en un futuro inmediato de esta tesis son la aplicación de la cepa autóctona de "Trichoderma" sp. T154 en condiciones de campo estudiando su interacción con el resto de la microbiota natural y sus efectos sobre la producción., [EN] This doctoral thesis evaluates the possibility of using autochthonous biological control agents to face grapevine trunk diseases. In particular, the use of fungi from the genus "Trichoderma" against "Phaeoacremonium minimum", which is considered a pioneer fungus of esca and Petri diseases. Nowadays, the main problem is the lack of effective products against these diseases. This is due to the withdrawal of chemical products to reduce the pernicious effects of pests and diseases and it is motivated by a greater concern about environment, and health of consumers and farmers. European policies look for ecological and sustainable solutions, adapted to climate change and respectful to animal, human and environmental health. However, there is a lack of consistency of commercial biological products and a limited number of chemical ones that, in addition, can induce resistance to pathogens. Therefore, the main objective of this thesis is based on looking for solutions based on the use autochthonous biocontrol "Trichoderma" spp. agents adapted to the ecological niche of the vineyards from Castilla y León region. Here we show that the isolate "Trichoderma" sp. T154, selected and characterized as a biological control agent adapted to the ecological conditions of this region, which acts efficiently against "Phaeoacremonium minimum", being also able to colonize pruning wounds under climate change conditions. First, a survey of vineyards was carried out in Castilla y León. A new method was used to isolate "Trichoderma" strains from bark of grapevine plants. It was confirmed that the older grapevine plants are, the higher is the diversity of "Trichoderma" spp. isolates and also, a negative correlation was identified between the number of fungicides sprayed per campaign and the diversity of "Trichoderma" spp. isolates. Moreover, 25 isolates of "Trichoderma" were identified from the 10 sampled plots. The antagonistic capacity of these isolates was evaluated using "in vitro" confrontation dual assays against "Phaeoacremonium minimum" Y038-05-3a. The isolates T75, T79, T84 and T154 were selected by their high biocontrol activity. Subsequently, the isolate T154 was used for evaluating biocontrol mechanisms against the isolate "Phaeoacremonium minimum" CBS 100398. This autochthonous "Trichoderma" isolate was transformed using the protoplast procedure in order to express the red protein tdTom. Thus, mycoparasitism under "in vitro" conditions and niche exclusion in wounds of Vitis vinifera cv. Tempranillo were identified as main mechanisms of biocontrol performed by this biological control agent. Finally, "Trichoderma" strain T154 among others indigenous "Trichoderma" strains were evaluated at different temperature conditions and also were inoculated in pruning wounds to evaluate their capacity of colonization. This strain demonstrated a great production of spores at 25ºC under "in vitro" conditions. Moreover, "Trichoderma" strain T154 was able to significantly colonize pruning wounds of Vitis vinifera cv. Tempranillo under semi-field conditions during winter. Besides, this strain was able to remain at least 12 weeks pos inoculation in plant, adapted to simulated climate change conditions and inoculated based on One health approach. Future implications derived from this thesis should be the spraying of this autochthonous strain, "Trichoderma" sp. T154, under field conditions to study its interaction with the rest of microbiota and its effects on wine production., Centro para el Desarrollo Tecnológico Industrial –CDTI
BULERIA. Repositorio Institucional de la Universidad de León
Publication Tesis doctoral (DoctoralThesis)

Estrategias de control de enfermedades micobacterianas, Control strategies for mycobacterial diseases

  • Blanco Vázquez, Cristina
172 p., [ES] La tuberculosis (TB), enfermedad zoonósica por excelencia, y la paratuberculosis (PTB), cuyo agente causal presenta potencial zoonósico, son enfermedades micobacterianas que, por su importancia desde el punto de vista económico y de la salud pública, constituyen el objeto de esta Tesis Doctoral. En general, para el control de una enfermedad existen cinco estrategias que incluyen el tratamiento, la mejora genética, la vacunación, la adopción de medidas higiénico-sanitarias y de manejo y el saneamiento. Tres de esas estrategias se tratan en esta Tesis Doctoral a través de dos Capítulos; el primero (Capítulo I) se centra en las estrategias de toma de medidas higiénico-sanitarias, de manejo y bioseguridad y vacunación; y el Capítulo II, en el desarrollo de nuevos test diagnósticos de aplicación al saneamiento, entendido este último como el diagnóstico de la enfermedad y la retirada de los animales positivos. El Capítulo I, a su vez, consta de dos subcapítulos. El Capítulo I.1. investiga si el tejón europeo (Meles meles) es relevante como hospedador de mantenimiento o reservorio de la TB en ambientes atlánticos, con el fin de evaluar la eficacia de posibles medidas de control de la enfermedad (vacunación) en el Capítulo I.2. Los resultados obtenidos indican que existe una asociación espacio-temporal de la enfermedad entre el tejón y el ganado bovino, además de una transmisión interespecífica, puesta de manifiesto mediante técnicas bacteriológicas y moleculares. Por consiguiente, el tejón debe considerarse una especie silvestre relevante bajo ciertas circunstancias en cuanto al mantenimiento de la TB, como sucede con ungulados silvestres como el jabalí o el ciervo en ambientes mediterráneos. En este sentido, la monitorización sanitaria del tejón se debe incluir en los planes de vigilancia de TB en la fauna silvestre, donde nuevas técnicas de diagnóstico, como el ensayo por inmunoabsorción ligado a enzimas (ELISA) basado en el derivado proteico p22, ha demostrado ser muy útil y más sensible y rápido que el cultivo bacteriológico. A su vez, y como parte de las actuaciones a llevar a cabo sobre la fauna silvestre en materia de TB, ha de considerarse la estrategia de vacunación. En el Capítulo I.2. se ha estudiado la respuesta inmune inducida a nivel local de dos candidatos vacunales: la vacuna viva atenuada bacilo de Calmette-Guérin (BCG) y la vacuna Mycobacterium bovis inactivada por calor (HIMB). Un hallazgo relevante es que HIMB induce una mayor respuesta inmune humoral que predominaría sobre la respuesta celular. Por su parte, el Capítulo II de esta Tesis se compone de tres subcapítulos cuyo objetivo radica en la búsqueda de nuevas herramientas diagnósticas sensibles y específicas, capaces de diagnosticar bovinos en distintos estadios de la PTB. Estos tres estudios están fundamentados en el trabajo de Alonso-Hearn y cols. (2019) en el que se identificaron mediante RNA-Seq (secuenciación masiva del transcriptoma completo) numerosos genes expresados diferencialmente (ED) en sangre completa y válvula ileocecal (VIC) de bovinos con distintos tipos de lesiones histológicas a nivel intestinal y animales control sin lesiones. Las proteínas codificadas por estos genes ED constituyen candidatos a biomarcadores de diagnóstico de la enfermedad, teniendo especial interés los biomarcadores capaces de detectar infecciones subclínicas, cuya detección a menudo escapa a los métodos de diagnóstico convencionales, al estar caracterizadas por la ausencia de signos clínicos, la presencia de lesiones histológicas de tipo focal y una carga bacteriana y título de anticuerpos bajos. Así, el Capítulo II.1. investiga, en base a los resultados del análisis transcriptómico, el potencial de ELISAs basados en la detección de cinco proteínas candidatas a biomarcadores de diagnóstico. Entre estas proteínas, el transportador de casetes de unión al ATP, miembro 13 de la subfamilia A (ABCA13) y la metaloproteinasa de matriz extracelular 8 (MMP8), por su función biológica y su alta precisión diagnóstica para detectar bovinos con lesiones de PTB de tipo focal y difusa, respectivamente, parecen presentar potencial para ser considerados biomarcadores diagnósticos de la PTB. Como continuación de este estudio, el Capítulo II.2. trata de confirmar dicha afirmación con la validación a gran escala de los ELISAs basados en la detección de ambas proteínas, confirmando que el ELISA basado en la detección de la proteína ABCA13 constituye una nueva técnica diagnóstica más sensible que los métodos de diagnóstico convencionales para detectar infecciones subclínicas, mientras que se descarta el empleo de la MMP8 como biomarcador para el diagnóstico de la PTB. Además, al comparar el rendimiento diagnóstico del ELISA basado en la detección de ABCA13 y el de otros métodos diagnósticos convencionalmente empleados, aplicando el modelo de simulación dinámica a 20 años desarrollado por Juste y Casal (1993), se comprobó que el empleo del ELISA basado en ABCA13 permitiría la erradicación de la PTB en menos de la mitad del tiempo necesario para hacerlo con el ELISA de IDEXX y el aislamiento bacteriológico y PCR a tiempo real en muestras de heces. A pesar de que la ratio beneficio/coste del empleo del ELISA basado en ABCA13 calculado a 20 años disminuyó entre un 8% y un 54% en comparación con la ratio calculada para el ELISA convencional de IDEXX, esta técnica ofrece una nueva alternativa a los ganaderos y gestores de sanidad animal para ayudar a controlar rápidamente cualquier brote de PTB. De manera similar, el Capítulo II.3. analiza el uso potencial de la intelectina 2 (ITLN2), como posible biomarcador post mortem de la infección. El gen precursor de la ITLN2 está sobreexpresado en muestras de VIC de bovinos con lesiones de tipo focal y difuso frente a animales control sin lesiones y se ha visto que juega un papel muy importante en la respuesta inmune innata a distintas infecciones. La caracterización de la expresión de la ITLN2 en muestras de VIC mediante inmunohistoquímica (IHQ) de animales con distintos tipos de lesiones histológicas y controles sin lesiones, reveló un número significativamente más elevado de células de Paneth y goblet inmunomarcadas en los bovinos con lesiones de tipo focal, y una relación inversamente proporcional entre el número de células positivas a la técnica y la gravedad de las lesiones histológicas. Este hallazgo sugiere que la ITLN2 puede desempeñar un papel importante en la patogénesis y progresión de la enfermedad, de tal manera que su cuantificación mediante IHQ constituye una buena herramienta diagnóstica post mortem de la PTB, complementaria a la histología. En definitiva, los trabajos llevados a cabo a lo largo de estos cuatro años se recogen en cinco publicaciones científicas que conforman los capítulos de “Metodología y Resultados” presentados en esta Tesis Doctoral y, que constituyen un documento único sobre avances en las estrategias de control de la TB y PTB, enfermedades micobacterianas que, dadas sus graves repercusiones a nivel mundial, precisan de un correcto y completo abordaje para su adecuado control., [EN] Tuberculosis (TB), a zoonotic disease par excellence, and paratuberculosis (PTB), whose causal agent has zoonotic potential, are Mycobacterial diseases that, due to their importance from the economic and public health perspective, are the subject of this PhD Thesis. Overall, five strategies are used for the disease control which include: treatment, genetic improvement, vaccination, the adoption of hygienic-sanitary, biosecurity and management measures, animal health campaigns, and test and culling. Three of these strategies are treated in this PhD Thesis through two Chapters; the first (Chapter I) focuses on the strategies for taking hygienic-sanitary, management and biosecurity measures, and vaccination; and Chapter II, in the development of new diagnostic tests for application to animal health campaigns, the latter understood as the diagnosis of the disease and the reactors removal. Chapter I, in turn, consists of two subchapters. Chapter I.1. investigates whether European badger (Meles meles) is relevant as a maintenance host or reservoir of TB in Atlantic environments, in order to assess the effectiveness of possible disease control measures (vaccination) in Chapter I.2. The results obtained indicate that there is a spatio-temporal association of the disease between badgers and cattle, in addition to interspecific transmission, revealed by bacteriological and molecular techniques. Therefore, the badger must be considered a relevant species under certain circumstances in terms of TB maintenance, as is the case with wild ungulates such as wild boar or deer in Mediterranean environments. In this regard, badger health monitoring should be included in TB surveillance plans in wildlife, where new diagnostic techniques, such as the enzyme-linked immunosorbent assay (ELISA) based on the multi-protein complex p22, have shown be very useful and more sensitive and faster than bacteriological culture. In turn, and as part of the actions to be carried out on wildlife in terms of TB, the vaccination strategy must be considered. In Chapter I.2. the immune response induced at the local level by two vaccine candidates has been studied: live-attenuated Mycobacterium bovis bacillus Calmette-Guérin (BCG) vaccine and the heat-Inactivated M. bovis (HIMB) vaccine. A relevant finding is that HIMB induces a greater humoral immune response that would predominate over the cellular response. Meanwhile, Chapter II of this Thesis consists of three subchapters whose objective consists on the search for new sensitive and specific diagnostic tools, capable of diagnosing cattle in different stages of PTB. These three studies are based on the work of Alonso-Hearn et al. (2019) in which numerous differential gene expression (ED) were identified by RNA-Seq analysis (massive sequencing of the complete transcriptome) of whole blood and ileocecal valve (VIC) samples of bovines with different types of histological lesions at the intestinal level and control animals without lesions. The proteins encoded by these ED are candidates for diagnostic biomarkers of the disease, with special interest in biomarkers capable of detecting subclinical infections, whose detection often escapes conventional diagnostic methods, as they are often characterized by the absence of clinical signs, the presence of focal histological lesions and a low bacterial load and antibody titer. Based on the previous transcriptomic analysis, the Chapter II.1. investigates the potential of ELISAs based on the detection of five candidate proteins, for diagnostic biomarkers. Among these proteins, the ATP-binding cassette subfamily A member 13 (ABCA13) and the matrix metallopeptidase 8 (MMP8), due to their biological function and high diagnostic precision to detect bovines with PTB lesions of focal and diffuse type, respectively, seems to have potential to be considered diagnostic biomarkers of PTB. As a continuation of this study, Chapter II.2. seeks to confirm these results with a large-scale validation of ELISAs based on the detection of both proteins, showing that the ELISA based on the detection of the ABCA13 protein constitutes a new diagnostic technique that is more sensitive than conventional diagnostic methods to detect subclinical infections, while the use of MMP8 as a biomarker for the diagnosis of PTB was ruled out. In addition, the diagnostic performance of the ELISA based on the detection of ABCA13 and other diagnostic methods conventionally used, was compared, applying the 20-year dynamic simulation model developed by Juste and Casal (1993), verifying that the use of the ELISA based on ABCA13 would allow the eradication of PTB in less than half the time needed to do it with the IDEXX ELISA and bacteriological isolation and real-time PCR in fecal samples. Although the benefit/cost ratio of using the ABCA13-based ELISA calculated at 20 years decreased between 8% and 54% compared to the ratio calculated for the conventional IDEXX ELISA, this technique offers a new alternative to farmers and animal health managers to help control any outbreak of PTB promptly. Similarly, Chapter II.3. analyzes the potential use of intelectin 2 (ITLN2), as a possible post mortem biomarker of infection. The ITLN2 precursor gene is overexpressed in VIC samples from bovines with focal and diffuse lesions compared to control animals without lesions, and it has been seen that it plays a very important role in the innate immune response to different infections. Characterization of ITLN2 expression in VIC samples by immunohistochemistry (IHQ), from animals with different types of histological lesions and controls without lesions, revealed a significantly higher number of immunolabeled Paneth and goblet cells in cattle with focal lesions and an inversely proportional relationship between the number of positive cells to the technique and the severity of the histological lesions. This finding suggests that ITLN2 may play an important role in the pathogenesis and progression of the disease, and that its quantification by IHQ constitutes a good post mortem diagnostic tool complementary to histology. In short, the work carried out over these four years is gathered in five scientific publications that make up the chapters on "Methodology and Results" presented in this PhD Thesis and, which constitute a unique document on advances in control strategies of TB and PTB, mycobacterial diseases that, given their serious repercussions worldwide, require a correct and complete approach for their adequate control., Ministerio de Economía y Competitividad, Agencia Estatal de Investigación, Fundación para el Fomento en Asturias de la Investigación Científica Aplicada y la Tecnología (FICYT)
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Low density Porcicoll separates spermatozoa from bacteria and retains sperm quality

  • Martínez Pastor, Felipe
  • Lacalle Fernández, Estíbaliz
  • Martínez Martínez, Sonia
  • Fernández Alegre, Estela
  • Álvarez Fernández, Laura
  • Martínez Alborcia, María J.
  • Bolarín Guillén, Alfonso
  • Morrell, Jane Margaret
[EN] Antibiotics are added to semen extenders to control the growth of bacteria contaminating semen during collection but may contribute to the development of antibiotic resistance. An alternative would be physical separation of spermatozoa from bacteria. The objective of the present study was to evaluate two low densities of Porcicoll for removal of bacteria, and for their effect on sperm recovery and sperm quality. Semen was collected from boars at a commercial station. Aliquots of 8 extended ejaculates were subjected to colloid centrifugation through 20% Porcicoll (P20) and 30% Porcicoll (P30) in 500 mL tubes and then stored at 17 °C. Microbiological examination and sperm quality evaluation (computer assisted sperm analysis and flow cytometry) were carried out on controls and all colloid-selected samples immediately after preparation and again after storage for 3 and 7 days. The microorganisms found were mainly bacteria from the environment, gut or skin. There was a considerable reduction or complete removal of some bacteria by both colloids. Recovery rates were 86% for P20 and 81% for P30. Sperm quality was not adversely affected by colloid centrifugation on day 0, and thereafter showed a more gradual deterioration in colloid centrifuged samples than in controls, possibly due to lower bacterial contamination. There were no differences in sperm quality between the two colloid treatments. Thus, these results show that contaminating bacteria in semen can be controlled by centrifugation through low density colloids, SI, This work was funded by a pump grant from the Society for Reproduction and Fertility, UK, to JMM and by grants to FMP (RTI2018-095183-B-I00, MCI/AEI/FEDER, EU, and LE023P20, Junta de Castilla y León/Consejería de Educación/FEDER, EU)
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Single layer centrifugation (SLC) for bacterial removal with Porcicoll positively modifies chromatin structure in boar spermatozoa

  • Lacalle Fernández, Estíbaliz
  • Fernández Alegre, Estela
  • Soriano Úbeda, Cristina de las Mercedes
  • Martínez Martínez, Sonia
  • Domínguez Fernández de Tejerina, Juan Carlos
  • González Montaña, José Ramiro
  • Morrell, Jane Margaret
  • Martínez Pastor, Felipe
[EN] The storage of boar semen samples at 17 °C for artificial insemination (AI) doses enables the proliferation of the bacteria, making antibiotics necessary. This can contribute to the development of antimicrobial resistance (AMR). This study tested bacterial presence and sperm chromatin structure after using a low-density colloid (Porcicoll) as an antibiotic alternative to eliminate bacteria. Ejaculates (8 boars, 3 ejaculates each) were split as control and low-density colloid centrifugation (single layer centrifugation, SLC, 20%, and 30% Porcicoll) into 500 ml tubes. Analyses were carried out at days 0, 3, and 7 (17 °C) for microbial presence and sperm chromatin structure analysis: %DFI (DNA fragmentation) and %HDS (chromatin immaturity), monobromobimane (mBBr; free thiols and disulfide bridges), and chromomycin A3 (CMA3; chromatin compaction). Besides comparing bacterial presence (7 species identified) and chromatin variables between treatments, the associations between these sets of variables were described by canonical correlation analysis (CCA). Results showed a significant decrease of some bacteria or a complete removal after SLC (especially for P30). SLC also caused a decrease of %HDS and an increase of disulfide bridges and low and medium mBBr populations, suggesting the removal of immature sperm (poor chromatin compaction). CCA showed an association pattern compatible with the degradation of sperm chromatin parameters with bacterial contamination, especially Enterobacteria, P. aeuriginosa, and K. variicola. In conclusion, bacterial contamination affects sperm chromatin beyond DNA fragmentation; SLC with low-density colloid not only removes bacteria from boar semen, but also chromatin structure is enhanced after selection, SI, This work was funded by a pump grant from Society for Reproduction and Fertility, UK, to JMM and by the Ministry of Science and Innovation (Spain), grant number RTI2018-095183-B-I00 (MCI/AEI/FEDER, EU) and LE023P20, Junta de Castilla y León/Consejería de Educación/FEDER, EU). The authors thank I. Quintela, B. de Arriba, L. Tejerina, M. Pérez-Luengo, N. Sorarrain, and B. Martín for technical assistance, and all the personnel at Topigs Norsvin España SLU (AIM Iberica) for their help in providing samples
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

The lattice of all 4-valued implicative expansions of Belnap–Dunn logic containing Routley and Meyer’s basic logic Bd

  • Robles Vázquez, Gemma
  • Méndez Rodríguez, José Manuel
[EN] The well-known logic first degree entailment logic (FDE), introduced by Belnap and Dunn, is defined with ∧, v and ~ as the sole primitive connectives. The aim of this paper is to establish the lattice formed by the class of all 4-valued C-extending implicative expansions of FDE verifying the axioms and rules of Routley and Meyer’s basic logic B and its useful disjunctive extension B^{d}. It is to be noted that Boolean negation (so, classical propositional logic) is definable in the strongest element in the said class., SI, Ministerio de Ciencia e Innovación (10.13039/501100011033)
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Two 4-valued implicative expansions of first-degree entailment logic: the relevant logic BN4vsp and the (relevant) entailment logic BN4ap

  • Robles Vázquez, Gemma
[EN] A logic L has the "variable-sharing property" (VSP) if in all L-theorems of the form A -> B, A and B share at least a propositional variable. A logic L has the "Ackermann property" (AP) if in all L-theorems of the form A -> (B -> C), A contains at least a conditional connective (->). Anderson and Belnap consider the VSP a necessary property of any relevant logic, and both the VSP and the AP necessary properties of any (relevant) entailment logic. Now, among relevant logicians, Brady’s logic BN4 is widely viewed as the adequate 4-valued implicative logic. But BN4 lacks the VSP and the AP. The aim of this paper is to define the logics BN4^{VSP} and BN4^{AP}. The former one has the VSP, whereas the latter one has the VSP and the AP. Moreover, both logics have some properties that do not support their consideration as mere artificial constructs., SI, Ministerio de Ciencia e Innovación (10.13039/501100011033)
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

A variety of De Morgan negations in relevant logics

  • Robles Vázquez, Gemma
  • Méndez Rodríguez, José Manuel
[EN] The present paper is inspired by Sylvan and Plumwood's logic B_{M} defined in "Non-normal relevant logics" and by their treatment of negation with the *-operator in "The semantics of first-degree entailment". Given a positive logic L including Routley and Meyer's basic positive logic and included in either the positive fragment of E or in that of RW, we investigate the essential De Morgan negation expansions of L and determine all the deductive relations they maintain to each other. A Routley-Meyer semantics is provided for each logic defined in the paper, SI, Ministerio de Ciencia e Innovación (10.13039/501100011033)
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

A Class of Implicative Expansions of Belnap-Dunn Logic in which Boolean Negation is Definable

  • Robles Vázquez, Gemma
  • Méndez Rodríguez, José Manuel
[EN] Belnap and Dunn’s well-known 4-valued logic FDE is an interesting and useful non-classical logic. FDE is defined by using conjunction, disjunction and negation as the sole propositional connectives. Then the question of expanding FDE with an implication connective is of course of great interest. In this sense, some implicative expansions of FDE have been proposed in the literature, among which Brady’s logic BN4 seems to be the preferred option of relevant logicians. The aim of this paper is to define a class of implicative expansions of FDE in whose elements Boolean negation is definable, whence strong logics such as the paraconsistent and paracomplete logic PŁ4 and BN4 itself are definable, in addition to classical propositional logic., SI, Ministerio de Ciencia e Innovación (10.13039/501100011033)
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

A note on functional relations in a certain class of implicative expansions of FDE related to Brady’s 4-valued logic BN4

  • Robles Vázquez, Gemma
  • Méndez Rodríguez, José Manuel
[EN] The logic E4 is related to Brady’s BN4 in a similar way to which Anderson and Belnap’s logic of entailment E is related to their logic of the relevant implication R. In "A companion to Brady’s 4-valued relevant logic: the 4-valued logic of entailment E4", quoted in this paper, three alternatives to BN4 and another three to E4 are summarily introduced in a couple of pages as the only alternatives containing Routley and Meyer’s basic logic B, provided some conditions are fulfilled. The aim of this note is to prove (i) BN4 and its three alternatives are the same logic up to some point, since they are functionally equivalent to each other, as it is the case with E4 and its three alternatives, which are also functionally equivalent to each other; (ii) to some extent, E4 is superior to BN4, since the latter is functionally included in the former, but not conversely., SI, Ministerio de Ciencia e Innovación (10.13039/501100011033)
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

A 2 set-up binary Routley semantics for Gödelian 3-valued logic G3 and its paraconsistent counterpart G3≤Ł

  • Robles Vázquez, Gemma
  • Méndez Rodríguez, José Manuel
[EN] G3 is Gödelian 3-valued logic, G3≤Ł Lis its paraconsistent counterpart and G3≤Ł isa strong extension of G3≤Ł. The aim of this paper is to endow each one of the logics just mentioned with a 2 set-up binary Routley semantics., SI, Ministerio de Ciencia e Innovación (10.13039/501100011033)
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

A 2 set-up Roultey-Meyer semantics for the 4-valued logic PŁ4.

BULERIA. Repositorio Institucional de la Universidad de León
Publication Capítulo o parte de un libro (BookPart)

A class of 4-valued implicative expansions of first-degree entailment logic (FDE) with the variable-sharing property

  • Robles Vázquez, Gemma
  • Méndez Rodríguez, José Manuel
[EN] Anderson and Belnap consider the variable-sharing property (VSP) a necessary property a relevance logic has to fulfill. A logic L has the VSP if in all L-theorems of implication form antecedent and consequent share at least a propositional variable. If a propositional logic has the VSP then it is free from "paradoxes of relevance." The aim of this paper is to define a class of implicative expansions with the VSP of the well-known first-degree entailment logic, FDE. The properties the elements in this class enjoy make them important logics, not mere artificial constructs., Ministerio de Ciencia e Innovación (10.13039/501100011033)
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Rubbing behavior of European brown bears: factors affecting rub tree selectivity and density

  • González Bernardo, Enrique
  • Bagnasco, Carlotta
  • Bombieri, Giulia
  • Zarzo Arias, Alejandra
  • Ruiz Villar, Héctor
  • Morales González, Ana
  • Lamamy, Cindy
  • Ordiz Fernández, Andrés Avelino
  • Cañedo, David
  • Díaz García, Juan
  • Chamberlain, Dan
  • Penteriani Dragone, Vincenzo
Published by Oxford University Press on behalf of the American Society of Mammalogists, [EN] Scent-mediated communication is considered the principal communication channel in many mammal species. Compared with visual and vocal communication, odors persist for a longer time, enabling individuals to interact without being in the same place at the same time. The brown bear (Ursus arctos), like other mammals, carries out chemical communication, for example, by means of scents deposited on marking (or rub) trees. In this study, we assessed rub tree selectivity of the brown bear in the predominantly deciduous forests of the Cantabrian Mountains (NW Spain). We first compared the characteristics of 101 brown bear rub trees with 263 control trees. We then analyzed the potential factors affecting the density of rub trees along 35 survey routes along footpaths.We hypothesized that: (1) bears would select particular trees, or tree species, with characteristics that make them more conspicuous; and (2) that bears would select trees located in areas with the highest presence of conspecifics, depending on the population density or the position of the trees within the species’ range. We used linear models and generalized additive models to test these hypotheses. Our results showed that brown bears generally selected more conspicuous trees with a preference for birches (Betula spp.). This choice may facilitate the marking and/or detection of chemical signals and, therefore, the effectiveness of intraspecific communication. Conversely, the abundance of rub trees along footpaths did not seem to depend on the density of bear observations or their relative position within the population center or its border. Our results suggest that Cantabrian brown bears select trees based on their individual characteristics and their location, with no influence of characteristics of the bear population itself. Our findings can be used to locate target trees that could help in population monitoring, [ES] La comunicación olfativa se considera el principal canal de comunicación en muchas especies de mamíferos. En comparación con la comunicación visual y la vocal, los olores persisten durante más tiempo, lo que permite a los individuos interactuar sin estar en el mismo lugar al mismo tiempo. El oso pardo (Ursus arctos), al igual que otros mamíferos, emplea la comunicación química, por ejemplo, por medio de olores depositados en árboles a través del marcaje o rascado. En este estudio, evaluamos la selección de árboles de marcaje por el oso pardo en los bosques predominantemente caducifolios de la Cordillera Cantábrica (noroeste de España). En primer lugar, comparamos las características individuales de 101 árboles de marcaje de oso pardo con 263 árboles control. Después, analizamos los factores potenciales que afectan la densidad de árboles de marcaje en 35 trayectos de prospección a lo largo de caminos y pistas forestales. Planteamos las hipótesis que: (1) los osos seleccionan árboles particulares, o especies de árboles, con características que los hacen más conspicuos; y (2) que los osos seleccionan árboles ubicados en áreas con mayor presencia de conespecíficos, dependiendo de la densidad de población osera o de la posición de los árboles dentro del rango de distribución de la especie. Usamos modelos lineales y modelos aditivos generalizados para probar estas hipótesis. Nuestros resultados mostraron que los osos pardos generalmente seleccionaron árboles más conspicuos, con preferencia por los abedules (Betula spp.). Esta elección puede facilitar el marcaje y/o detección de señales químicas y, por tanto, la eficacia de la comunicación intraespecífica. Por el contrario, la abundancia de marcaje a lo largo de los trayectos no parece depender de la densidad de las observaciones de osos o de su posición relativa con respecto al centro o los límites del rango de la población. Nuestros resultados sugieren que los osos pardos cantábricos seleccionan árboles en función de sus características individuales y de su ubicación, sin que influyan en ello las características de la población osera. Nuestros hallazgos pueden servir para localizar árboles específicos que podrían ayudar al monitoreo de la población, SI, We thank the Administrations of the Government of the Principality of Asturias (in particular, we thank Teresa Sánchez, Víctor Vázquez, and Pedro García-Rovés) and the Junta de Castilla y León (especially David Cubero, Mercedes García, and M. Ángeles Osorio) for providing the bear database and for their help during this study. We also thank M. Fernández, D. Ramos, and F. Somoano, of the “Patrulla Oso” (Bear Patrol) of Asturias for their continuous help in the field. During this research, EG-B was financially supported by a FPU grant (FPU15-03429) of the Spanish Ministry of Science, Innovation, and Universities. VP and AO were financially supported by the Excellence Project CGL2017-82782-P financed by the Spanish Ministry of Science, Innovation, and Universities, the Agencia Estatal de Investigación (AEI), and the Fondo Europeo de Desarrollo Regional (FEDER, EU). VP also was financially supported by a GRUPIN research grant from the Regional Government of Asturias (Ref.: IDI/2018/000151). GB was financially supported by a collaboration contract with the MUSE – Museo delle Scienze of Trento (Italy). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Visual marking in mammals first proved by manipulations of brown bear tree debarking

  • Penteriani Dragone, Vincenzo
  • González Bernardo, Enrique
  • Hartasánchez, Alfonso
  • Ruiz Villar, Héctor
  • Morales González, Ana
  • Ordiz Fernández, Andrés Avelino
  • Bombieri, Giulia
  • Díaz García, Juan
  • Cañedo, David
  • Bettega, Chiara
  • Delgado Sánchez, María del Mar
[EN] The rather limited human ability to understand animal vision and visual signalling has frequently clouded our expectations concerning the visual abilities of other animals. But there are multiple reasons to suspect that visual signalling is more widely employed by animals than previously thought. Because visibility of visual marks depends on the background in which they are seen, species spending most of their time living in dark conditions (e.g., in forests and/or having crepuscular and nocturnal habits) may rely on bright signals to enhance visual display. Here, as a result of experimental manipulations, we present, for the first time ever, evidence supporting the use of a new channel of intraspecific communication by a mammal species, i.e., brown bear Ursus arctos adult males relying on visual marks during mating. Bear reactions to our manipulation suggest that visual signalling could represent a widely overlooked mechanism in mammal communication, which may be more broadly employed than was previously thought, SI, V.P. and A.O. were financially supported by an Excellence Project (CGL2017-82782-P) financed by the Spanish Ministry of Science, Innovation and Universities, the Agencia Estatal de Investigación (AEI) and the Fondo Europeo de Desarrollo Regional (FEDER, EU). V.P. was also financially supported by a GRUPIN research grant from the Regional Government of Asturias (IDI/2018/000151). M.M.D. was financially supported by a Spanish Ramon y Cajal grant RYC-2014-16263. G.B. was financially supported by a post-doctoral research contract from MUSE – Museo delle Scienze di Trento (Italy)
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Large carnivores living alongside humans: Brown bears in human-modified landscapes

  • Morales González, Ana
  • Ruiz Villar, Héctor
  • Ordiz Fernández, Andrés Avelino
  • Penteriani Dragone, Vincenzo
[EN] Expansion of human activities into large carnivore habitats and of large carnivore ranges into anthropogenic settings increase the potential for human-wildlife conflicts. Future carnivore survival and recovery depend on both their ability to adapt to human-modified landscapes and the application of adequate conservation strategies. We review human-related factors that negatively affect brown bears inhabiting human-modified landscapes, aiming to improve human-bear coexistence. Brown bears have triggered much research and a review on this model species should be useful for the conservation-oriented management of many large carnivores. In human-modified landscapes, main threats to bear populations are human settlements, habituation and availability of anthropogenic food, density and traffic load of roads and railways, and recreational and industrial activities. Main effects of coexistence with humans for bears are: increased disturbance, human-bear conflicts and human-caused mortality; behavioural alterations; reduced fitness and genetic diversity; and physiological alterations. To promote bear-human coexistence in human-modified landscapes, we identified nine key elements: reduction of human-induced mortality and use of scientific information for better assessment of new infrastructures; improve education on waste management and bear deterrence methods; safeguard and restore habitat connectivity; mitigate road effects and restrict motorized trail use; adjust viewing activity practices to local conservation status of bear populations and food availability; implement mitigation measures to minimize risk of human-bear encounters; quantify empirically the effects of recreational activities on the energetics and fitness of bears; better dissemination of scientific results and management guidelines; and further research on behavioural reactions of bears to different management regimes and persecution histories, SI, During this research, V.P. and A.O. were financially supported by the Excellence Project CGL2017-82782-P financed by the Spanish Ministry of Science, Innovation and Universities, the Agencia Estatal de Investigación (AEI) and the Fondo Europeo de Desarrollo Regional (FEDER, EU). V.P. was also funded by a GRUPIN research grant from the Regional Government of Asturias (Ref.: IDI/2018/000151)
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

New insights into swine dysentery: faecal shedding, macro and microscopic lesions and biomarkers in early and acute stages of Brachyspira hyodysenteriae infection

  • Pérez Pérez, Lucía
  • Carvajal Urueña, Ana María
  • Puente Fernández, Héctor
  • Peres Rubio, Camila
  • Cerón Madrigal, José Joaquín
  • Rubio Nistal, Pedro Miguel
  • Argüello Rodríguez, Héctor
[EN] Background: Swine dysentery (SD) is a severe mucohaemorrhagic colitis in pigs caused classically by Brachyspira hyodysenteriae. Although several aspects of B. hyodysenteriae infection dynamic are already described, further research in the early stage of this infection is required. In this study, 7-week-old pigs were orally challenged with B. hyodysenteriae to obtain information about faecal shedding, macro and microscopic intestinal lesions and serum acute phase proteins in pigs at the onset of B. hyodysenteriae shedding (early infection group, n = 8), in pigs with mucohaemorrhagic diarrhoea (acute infection group, n = 8) and in non-infected controls (n = 16). Results: First B. hyodysenteriae detection by q-PCR and first loose stools with blood and mucus occurred both at 8 days post-inoculation. The lapse between a positive q-PCR and observation of mucohaemorrhagic diarrhoea ranged from 0 to 3 days, except in a single pig in which this period lasted 5 days. Macroscopic lesions were observed in the large intestine from both infected groups although more frequent and severe in acute infection group. Microscopic observation of the apex mucosa revealed that in early infection only higher ulceration values were observed compared to healthy controls. In contrast, the acute infection group exhibited higher ulceration, neutrophils infiltration and increased mucosal thickness compared to the other two groups. Among the serum biomarkers tested, only haptoglobin, C-reactive protein, and creatine kinase showed a significant increase in pigs in the acute infection period compared to controls, whereas haptoglobin was the only factor with a significant increase at the early infection compared to non-infected animals. Conclusions: This study provides new insights about SD and remarks the complex and limited options to perform an early detection of infected animals beyond PCR diagnosis, SI, This work was performed under the frame of the project SDyMiHO funded by the Spanish Ministerio de Ciencia e Innovación (ref PID2019-110662RB-I00)
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

On three-valued logics with the variable sharing property

  • Robles Vázquez, Gemma
[EN] The class of the logics free from paradoxes of relevance determined by all natural implicative expansions of Kleene’s strong 3-valued matrix with two designated values is defined. These logics are free from paradoxes of relevance in the sense that they have the "variable sharing property". They have "natural conditionals" in the sense that the function defining them coincides with the classical function when restricted to the "classical values", satisfies Modus Ponens and, finally, assigns a designated value to a conditional whenever its antecedent and its consequence are assigned the same value. These logics are defined by using a "two-valued" overdetermined Belnap-Dunn semantics. Thus, the interpretation of the three values is crystalline. The logics here introduced enjoy the properties customarily demanded of many-valued implicative logics except, of course, the satisfaction of the rule "Verum ex quodlibet"., SI, Ministerio de Economía y Competitividad (España)
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Las migraciones urbanas hacia el espacio rural castellano y leonés durante la COVID-19, Urban Migrations to Rural Areas of Castile and Leon during COVID-19

  • López González, Alejandro
[ES] Las restricciones a la movilidad impuestas por la lucha contra el crecimiento de los contagios de la COVID-19 han provocado una severa perturbación en los flujos migratorios recibidos por las áreas rurales. El confinamiento ha supuesto para muchos residentes en las grandes ciudades una sensación de enclaustramiento que se ha traducido en una cierta reversión de los flujos tradicionales campo-ciudad que tuvo su traducción en los medios de comunicación. El objetivo principal de esta aportación es valorar el alcance de esta reversión y medir la sostenibilidad de los flujos de población llegados a los municipios rurales de Castilla y León desde las ciudades. Estos flujos se cuantifican y tratan como series temporales, aplicando un modelo SARIMA para estimar los cambios experimentados por aquellas a lo largo del bienio 2020-2021. Se aprecia la brusquedad del cambio migratorio desde la implementación del confinamiento, así como más o menos rápidamente ha retornado a una senda semejante al periodo prepandemia, si bien con visibles diferencias entre las diferentes provincias, en especial entre las vecinas a Madrid y Bilbao frente al resto de la región., [EN] Mobility restrictions imposed by pandemic COVID-19 control had provoked a severe disruption in the migratory flows to rural areas. For many city residents, lockdowns created a sense of confinement, which led to a severe disruption of the traditional rural-to-urban migration flows—a shift that garnered media attention. The primary objective of this contribution is to assess the extent of this reversion and to measure the sustainability of population flows to rural municipalities in Castilla y León from urban areas. These flows are quantified and treated as time series, with a SARIMA model applied to estimate changes during the 20202021 biennium. The abruptness of the migratory shift since the implementation of lockdowns can be appreciated, as well as the speed at which it returned to a similar path to the pre-pandemic period, although with notable differences among provinces, especially those neighbouring Madrid and Bilbao compared to the rest of the region., SI, Esta publicación ha sido financiada por el proyecto de I+D+i PID2020- 114554RB-I00, financiado por el Ministerio de Ciencia e Innovación (MCIN), Agencia Estatal de Investigación (AEI /10.13039/501100011033/).
BULERIA. Repositorio Institucional de la Universidad de León
Publication Artículo científico (JournalArticle)

Impact of Wood-Boring Larvae of "Xylotrechus arvicola" (Coleoptera: Cerambycidae) on Mechanical Properties of "Vitis vinifera" Plants

  • Ramírez Lozano, Daniela
  • Antolín Rodríguez, Andrea
  • Carro-Huerga, Guzmán
  • Zanfaño, Laura
  • Casquero Luelmo, Pedro Antonio
  • Guerra Sánchez, Marcos
  • Juan Valdés, Andrés
  • Rodríguez González, Álvaro
16 p., [EN] Xylotrechus arvicola represents a significant insect pest impacting Vitis vinifera within the principal wine-producing territories of the Iberian Peninsula. The larvae of this species bore into grapevine wood, resulting in significant structural and biomechanical deterioration to the plant. Compressive and flexural tests were conducted to assess the mechanical properties of wood affected by X. arvicola. Compressive and flexural strength exhibited a decline with the escalation of the Total Damaged Surface Area (TDSA) of the samples, ranging from 0.31% to 0.73% in trunks and from 0.04 to 0.76% in branches, irrespective of the wood moisture content (fresh and dry). The most significant reduction in resistance occurred in affected dry trunks and branches. Notably, the deflection at break for dry samples was lower compared to fresh samples (65.00 and 97.85 mm, respectively). Moreover, the deflection at break for affected fresh samples (164.37 mm) significantly surpassed that of unaffected fresh samples (72.58 mm) and affected dry samples (37.50 mm). It is noteworthy that a higher percentage of TDSA coincided with diminished wood resistance. The percentage of fungal growth symptoms observed in affected wood samples was 66.66% for dry trunks, 75.00% for fresh branches, and 60.00% for dry branches. The damage inflicted by larvae facilitated the spread of grapevine diseases via emergence of holes created by insects upon exiting the wood and through the larval galleries connected to them. This damage also altered the mechanical properties of grapevine plants, with fresh branches exhibiting the most pronounced effects., SI
Docta Complutense
Publication Artículo científico (JournalArticle)

Candidate gene analysis of osteochondrosis in Spanish Purebred horses

  • Sevane Fernández, Natalia
  • Dunner Boxberger, Helene Susana
  • Boado, A.
  • Cañón Ferreras, Francisco Javier
Equine osteochondrosis (OC) is a frequent developmental orthopaedic disease with high economic impact on the equine industry and may lead to premature retirement of the animal as a result of chronic pain and lameness. The genetic background of OC includes different genes affecting several locations; however, these genetic associations have been tested in only one or few populations, lacking the validation in others. The aim of this study was to identify the genetic determinants of OC in the Spanish Purebred horse breed. For that purpose, we used a candidate gene approach to study the association between loci previously implicated in the onset and development of OC in other breeds and different OC locations using radiographic data from 144 individuals belonging to the Spanish Purebred horse breed. Of the 48 polymorphisms analysed, three single nucleotide polymorphisms (SNPs) located in the FAF1, FCN3 and COL1A2 genes were found to be associated with different locations of OC lesions. These data contribute insights into the complex gene networks underlying the multifactorial disease OC, and the associated SNPs could be used in a marker-assisted selection strategy to improve horse health, welfare and competitive lifespan.
Docta Complutense
Publication Artículo científico (JournalArticle)

Common birds combine pest control and seed dispersal in apple orchards through a hybrid interaction network

  • García, Daniel
  • Rumeu, Beatriz
  • Illera, Juan Carlos
  • Miñarro, Marcos
  • Palomar García, Gemma
  • González Varo, Juan Pedro
Farmland ecosystem services frequently result from different ecological functions simultaneous provided by specific biodiversity groups such as birds. These bundles of ecosystem services may be approached from inter-specific interaction networks, which inform about the structure of interactions while identifying the species more relevant for combining ecosystem services. Here, we studied how birds provide pest control in apple orchards, and seed dispersal in orchard-adjacent hedgerows and forests. For this, we used field data and DNA-metabarcoding of bird fecal samples, obtained across a whole year from three orchards in northern Spain, to build interaction networks between birds and arthropod apple pests, and between birds and non-crop fleshy-fruited plants. We addressed the structure of the different networks underpinning pest control and seed dispersal. We also combined both ecosystem services through a hybrid network to assess, by means of centrality measures, the topological roles of individual bird species and their ecological determinants. Interaction networks differed in structure, with pest-control network showing higher modularity and specialization than seed-dispersal network, otherwise characterized by high nestedness. These differences emerged from the different typologies, i.e. antagonistic vs. mutualistic, of the bird-pest and bird-plant interactions. The hybrid network integrating pest control and seed dispersal evidenced strong variability across birds in their role to connect ecosystem services, depending on their central or peripheral positions. Bird centrality was positively related with species abundance and independent of body size or diet diversity. This finding suggests the relevance of neutral processes (i.e. the random encounters of organisms) for driving inter-specific interactions, and it highlights the relevance of common birds for sustaining ecosystem service bundles in agroecosystems. The preservation of fruit-rich hedgerows and forest patches around apple orchards is an action recommended to maintain the populations of common bird species, responsible of both agricultural pest control and the natural regeneration of these habitats.
Docta Complutense
Publication Artículo científico (JournalArticle)

Impacto del tipo genético y el sexo sobre parámetros productivos y el contenido en grasa intramuscular, así como el consumo de antioxidantes sobre la oxidación de la carne en cerdo ibérico (50 %) de “Cebo de Campo”, Impact of genotype and sex on performance and intramuscular fat content, as well as the consumption of antioxidants on meat oxidation in Iberian (50 %) pig reared in outdoor system

  • Usero Alonso, Guillermo
  • Gil Rueda, Francisco
  • Isabel Redondo, Beatriz
  • Ramis Vidal, Guillermo
  • Muñoz Luna, Antonio
El objetivo de este estudio, realizado durante la etapa de crecimiento de cerdos ibéricos (50 % Duroc) categoría "Cebo de Campo" hasta su sacrificio comercial, fue investigar por un lado, el efecto del tipo genético del verraco finalizador (Duroc TemplarioTM (DT) y Duroc TemplarioTM de alta infiltración grasa (DTGIM)) y el sexo sobre parámetros de crecimiento, rendimiento de canal y el contenido de grasa intramuscular; y por otro el efecto de la combinación de antioxidantes suplementados en el pienso de acabado (150 ppm de vitamina E sintética (VE) versus 150 ppm de vitamina E sintética + 500 ppm de INGASO QTMEAT® (VEQM)), en parámetros de oxidación de la carne y ácidos grasos del tejido graso subcutáneo. El experimento se diseñó en condiciones de campo con dos lotes de animales: lote A, formado por 91 machos castrados y 95 hembras, descendientes del verraco DT que recibieron el tratamiento antioxidante VE en el pienso de acabado, y lote B, formado por 56 machos castrados y 60 hembras, descendientes del verraco DTGIM que recibieron el tratamiento antioxidante VEQM en el pienso de acabado. Se les realizaron mediciones repetidas individuales: durante la fase de crecimiento, en una finca situada en el entorno de la dehesa extremeña en el término municipal de Olivenza, del peso vivo y espesor graso dorsal; y tras su sacrificio de parámetros de canal, contenido de grasa intramuscular y oxidación lipídica sobre muestras de carne de longissimus thoracis et lumborum, así como de la composición de ácidos grasos sobre muestras de grasa subcutánea. Se observó que, por efecto del tipo genético y el sexo, los animales descendientes de Duroc DT y los machos presentaron las tasas de crecimiento significativamente (p < 0,05) mayores. Los DT y las hembras obtuvieron un significativo (p < 0,05) menor contenido graso tanto de su espesor graso dorsal de la canal como de grasa intramuscular de la carne, así como un significativo (p < 0,05) mayor rendimiento de jamón y lomo. Sin embargo, los DTGIM y las hembras alcanzaron un significativo (p < 0,05) mayor rendimiento de canal. Mientras que por efecto del consumo de antioxidantes se observó que, en los animales que consumieron el tratamiento antioxidante reforzado (VEQM), se oxidó menos la carne, obteniendo valores de oxidación lipídica significativamente (p < 0,05) menores y de ácidos grasos poliinsaturados mayores. En conclusión, la utilización de líneas de verraco Duroc finalizador más grasas, junto con la incorporación de una combinación adecuada de antioxidantes en el pienso de finalización en la producción de cerdo ibérico contribuyen a la obtención de carnes de mayor valor nutricional.
Docta Complutense
Publication Artículo científico (JournalArticle)

BET inhibitor nanotherapy halts kidney damage and reduces chronic kidney disease progression after ischemia-reperfusion injury

  • Saiz, M. L.
  • Lozano-Chamizo, L.
  • Florez, A. B.
  • Marciello, Marzia
  • Diaz-Bulnes, P.
  • Corte-Iglesias, V.
  • Bernet, C. R.
  • Rodrigues-Diez, R. R.
  • Martin-Martin, C.
  • Rodriguez-Santamaria, M.
  • Fernandez-Vega, I.
  • Rodriguez, R. M.
  • Diaz-Corte, C.
  • Suarez-Alvarez, B.
  • Filice, Marco
  • Lopez-Larrea, C.
Targeting epigenetic mechanisms has emerged as a potential therapeutic approach for the treatment of kidney diseases. Specifically, inhibiting the bromodomain and extra-terminal (BET) domain proteins using the small molecule inhibitor JQ1 has shown promise in preclinical models of acute kidney injury (AKI) and chronic kidney disease (CKD). However, its clinical translation faces challenges due to issues with poor pharmacokinetics and side effects. Here, we developed engineered liposomes loaded with JQ1 with the aim of enhancing kidney drug delivery and reducing the required minimum effective dose by leveraging cargo protection. These liposomes efficiently encapsulated JQ1 in both the membrane and core, demonstrating superior therapeutic efficacy compared to freely delivered JQ1 in a mouse model of kidney ischemia-reperfusion injury. JQ1-loaded liposomes (JQ1-NPs) effectively targeted the kidneys and only one administration, one-hour after injury, was enough to decrease the immune cell (neutrophils and monocytes) infiltration to the kidney—an early and pivotal step to prevent damage progression. By inhibiting BRD4, JQ1-NPs suppress the transcription of pro-inflammatory genes, such as cytokines (il-6) and chemokines (ccl2, ccl5). This success not only improved early the kidney function, as evidenced by decreased serum levels of BUN and creatinine in JQ1-NPs-treated mice, along with reduced tissue expression of the damage marker, NGAL, but also halted the production of extracellular matrix proteins (Fsp-1, Fn-1, α-SMA and Col1a1) and the fibrosis development. In summary, this work presents a promising nanotherapeutic strategy for AKI treatment and its progression and provides new insights into renal drug delivery.
Docta Complutense
Publication Artículo científico (JournalArticle)

Polymorphisms in ten candidate genes are associated with conformational and locomotive traits in Spanish Purebreed horses

  • Sevane Fernández, Natalia
  • Dunner Boxberger, Helene Susana
  • Boado, Ana
  • Cañón Ferreras, Francisco Javier
The Spanish Purebred horses, also known as Andalusian horses, compete to the highest standards in international dressage events. Gait and conformation could be used as early selection criteria to detect young horses with promising dressage ability. Although the genetic background of equine size variation has been recently uncovered, the genetic basis of horse conformational and locomotive traits is not known, hampered by the complex genetic architecture underlying quantitative traits and the lack of phenotypic data. The aim of this study was to validate the loci associated with size in 144 Spanish Purebred horses, and to seek novel associations between loci previously associated with the development of osteochondrosis (OC) lesions and 20 conformational and locomotive traits. Ten loci were associated with different conformational and locomotive traits (LCORL/NCAPG, HMGA2, USP31, MECR, COL24A1, MGP, FAM184B, PTH1R, KLF3 and SGK1), and the LCORL/NCAPG association with size in the Spanish Purebred horse was validated. Except for HMGA2, all polymorphisms seem to influence both the prevalence of OC lesions and morphological characters, supporting the link between conformation and OC. Also, the implication of most genes in either immune and inflammatory responses and cellular growth, or ossification processes, reinforces the role that these mechanisms have in the aetiology of OC, as well as their reflection on the general conformation of the individual. These polymorphisms could be used in marker-assisted selection (MAS) programmes to improve desirable conformational traits, but taking into account their possible detrimental effect on OC prevalence.
Docta Complutense
Publication Artículo científico (JournalArticle)

Evolution of the Phenolic Fraction and Aromatic Profile of Red Wines Aged in Oak Barrels

  • Del Fresno, Juan Manuel
  • Morata, Antonio
  • Loira, Iris
  • Escott Pérez, Carlos
  • Suárez-Lepe, José Antonio
Various changes occur in red wine during aging in oak barrels. Among these, the variation of the polyphenolic fraction and the transfer of aromatic compounds to the wine from oak wood are of great importance. The aim of the present work is to compare the chemical composition of wines aged in different new oak barrels with similar commercial denominations. During 8 months, the total polyphenol index (TPI), color parameters, anthocyanins and pyranoanthocyanins, and wood aromatic compounds were periodically evaluated. The measurement of the TPI and color parameters was similar in all wines, but significant differences were found in total anthocyanin and vitisin content and in certain aromatic compounds belonging to volatile phenols, furanic compounds, and phenolic aldehydes. The results obtained indicate the need for the winemaker to carry out preliminary tests in order to be able to choose the wood that best suits the sensorial profile of the wine.
Docta Complutense
Publication Artículo científico (JournalArticle)

The Presence of Rabbit Warrens in an Agricultural Landscape is Related to Patch Features and Distance to a Highway

  • Delgado Sáez, Juan Antonio
  • Castaño-Sánchez, Andrea
  • Bombín, Hugo
  • Jiménez Escobar, María Dolores
Agricultural activities and road construction have been reported as major causes of landscape fragmentation. We have assessed the distribution of warrens of a burrowing mammal, the European rabbit (Oryctolagus cuniculus), in natural vegetation patches within an agricultural mosaic crossed by a highway. The rabbit is considered a key species in Mediterranean ecosystems because of both, its role as a prey, and as an engineering species. We have specifically considered the occurrence and abundance of warrens (a group of entrances < 2 m from each other) as well as their size (number of entrances) and their spatial distribution within natural vegetation patches. Results showed that rabbit occurrence is more likely in natural vegetation patches with steeper slopes, more circular shapes and closer to the highway. In addition, there were more warrens in larger patches and larger warrens were found in larger, steeper, elongated patches. More frequent presence and greater warren abundance found close to the highway may be due to the barrier effect, but attraction due to habitat suitability and protection from predators have also been suggested in the literature. Besides the relevance of the different mechanisms implied, our results suggest that the presence of roads modifies the presence of rabbit warrens across a fragmented agricultural landscape. In this sense, roads could impact rabbit density and, therefore, present relevant implications for the population persistence of this species; also, roads could indirectly affect the distribution and welfare of rabbits' predators.
Docta Complutense
Publication Artículo científico (JournalArticle)

Phenotypic and genetic characterization of antimicrobial resistance in <i>Salmonella enterica</i> serovar Choleraesuis isolates from humans and animals in Spain from 2006 to 2021

  • Jacqueline, Camille
  • Samper-Cativiela, Clara
  • Monzon Fernandez, Sara
  • Ugarte Ruiz, María
  • Cuesta de la Plaza, Isabel
  • Álvarez Sánchez, Julio
  • Herrera-Leon, Silvia
Objectives: While an increase in the levels of MDR in Salmonella enterica sevorar Choleraesuis has been reported in Europe, little is known about the situation in Spain. Therefore, we first aimed to assess the phenotypic resistance profile and to determine the presence of genetic determinants of resistance of S. Choleraesuis isolates collected in animal and human. Our second objective was to identify and characterize clusters of highly related isolates. Methods: We analysed 50 human and 45 animal isolates retrieved from 2006 to 2021 using the disc diffusion method and performed WGS followed by analyses of genetic determinants and phylogenetic analysis. Results: All isolates were of ST145 and corresponded to the variant Kunzendorf. Swine isolates harboured a significantly higher number of antimicrobial resistance genes than human isolates, and often carried plasmid replicons of the IncHI2/IncHI2A type (42% of all animal isolates). In addition, we identified several MDR S. Choleraesuis strains circulating in humans and swine between 2006 and 2021. The phylogenetic analyses identified four clades associated with specific patterns of resistance genes and plasmid replicons. The clades also included isolates that differed in terms of year and region of isolation as well as host of origin. Conclusions: This One Health approach highlights that reducing human MDR S. Choleraesuis infections may require the adoption of strategies that not only seek to prevent cases in humans but also to characterize and reduce the infection burden in swine.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Deep Sequencing Reveals Dual Evolution of SARS-CoV-2, Insights Into Defective Genomes From Wuhan-Hu-1 Variants to Omicron Subvariants

  • Campos, Carolina|||0000-0002-0132-7027
  • Ibañez Lligoña, Marta|||0000-0003-3428-2168
  • Colomer Castell, Sergi|||0000-0002-0307-7455
  • Gregori i Font, Josep|||0000-0002-4253-8015
  • Garcia-Cehic, D.|||0000-0002-0009-038X
  • Andrés, Cristina|||0000-0002-3200-0895
  • Piñana, Maria|||0000-0002-4766-2613
  • González Sánchez, Alejandra|||0000-0002-1809-3415
  • Rando-Segura, Ariadna|||0000-0003-4555-7286
  • Esperalba, Juliana|||0000-0003-1326-1341
  • Saubi, Narcis|||0000-0001-5493-1044
  • Cortese, Maria Francesca|||0000-0002-4318-532X
  • Tabernero, David|||0000-0002-1146-4084
  • Rodríguez Frías, Francisco|||0000-0002-9128-7013
  • Ferrer Costa, Roser|||0000-0002-8925-3172
  • Esteban Mur, Juan Ignacio|||0000-0001-5085-917X
  • Kakze-van der Honing, Renate W.
  • Kampfraath, Andries A.
  • Vergara-Alert, Júlia|||0000-0001-7484-444X
  • Segalés Coma, Joaquim|||0000-0002-1539-7261
  • van der Poel, Wim H. M.
  • Pumarola Suñé, Tomàs|||0000-0002-5171-7461
  • Antón Pagarolas, Andrés, 1976-|||0000-0002-1476-0815
  • Quer, Josep|||0000-0003-0014-084X
SARS-CoV-2 has evolved from early variants dominating the first (B.1.5, B.1.1) and second (B.1.177) pandemic waves, which exhibited a higher frequency of minority mutants with deletions leading to Defective Viral Genomes (DVGs) in the spike region near the S1/S2 cleavage site than the Alpha, Beta, and Delta variants. The emergence of Omicron has significantly altered the dominant variant profile, with Omicron subvariants now representing 100% of circulating viruses. To monitor the evolution and adaptation of Omicron in the human population, a deep-sequencing study was performed in RNA samples of BA.1, BA.1.1, BA.2, BA.5, BQ.1.1, XBB.1.5 and BA.2.86 Omicron subvariants. The findings reveal two occurrences of similar evolutionary patterns within SARS-CoV-2 characterized by a shift from a significant to a very low production of DVGs. This event suggests that DVGs might play a role in the virus's spread and adaptation for persistence in infected humans.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

In-Host HEV Quasispecies Evolution Shows the Limits of Mutagenic Antiviral Treatments

  • Colomer Castell, Sergi|||0000-0002-0307-7455
  • Gregori i Font, Josep|||0000-0002-4253-8015
  • Garcia-Cehic, D.|||0000-0002-0009-038X
  • Riveiro Barciela, Mar|||0000-0001-9309-2052
  • Buti, Maria|||0000-0002-0732-3078
  • Rando-Segura, Ariadna|||0000-0003-4555-7286
  • Vico-Romero, Judit|||0000-0003-2461-4317
  • Campos, Carolina|||0000-0002-0132-7027
  • Ibañez Lligoña, Marta|||0000-0003-3428-2168
  • Adombi, Caroline Melanie|||0000-0001-9739-9166
  • Cortese, Maria Francesca|||0000-0002-4318-532X
  • Tabernero, David|||0000-0002-1146-4084
  • Esteban Mur, Juan Ignacio|||0000-0001-5085-917X
  • Rodríguez Frías, Francisco|||0000-0002-9128-7013
  • Quer, Josep|||0000-0003-0014-084X
Here, we report the in-host hepatitis E virus (HEV) quasispecies evolution in a chronically infected patient who was treated with three different regimens of ribavirin (RBV) for nearly 6 years. Sequential plasma samples were collected at different time points and subjected to RNA extraction and deep sequencing using the MiSeq Illumina platforms. Specifically, we RT-PCR amplified a single amplicon from the core region located in the open-reading frame 2 (ORF2). At the nucleotide level (genotype), our analysis showed an increase in the number of rare haplotypes and a drastic reduction in the frequency of the master (most represented) sequence during the period when the virus was found to be insensitive to RBV treatment. Contrarily, at the amino acid level (phenotype), our study revealed conservation of the amino acids, which is represented by a high prevalence of the master sequence. Our findings suggest that using mutagenic antivirals concomitant with high viral loads can lead to the selection and proliferation of a rich set of synonymous haplotypes that express the same phenotype. This can also lead to the selection and proliferation of conservative substitutions that express fitness-enhanced phenotypes. These results have important clinical implications, as they suggest that using mutagenic agents as a monotherapy treatment regimen in the absence of sufficiently effective viral inhibitors can result in diversification and proliferation of a highly diverse quasispecies resistant to further treatment. Therefore, such approaches should be avoided whenever possible.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Thermal design guidelines of solar power towers

  • Rodríguez Sánchez, María de los Reyes
  • Soria Verdugo, Antonio
  • Almendros Ibáñez, José Antonio
  • Acosta Iborra, Antonio
  • Santana Santana, Domingo José
One of the main problems of solar power tower plants with molten salt as heat transfer fluid is the reliability of central receivers. The receiver must withstand high working temperatures, molten salt corrosion and important solar flux transients that lead to thermal stresses and fatigue. Despite these difficulties, it is necessary an estimation of the receiver thermal efficiency in order to have an accurate estimation of the investment cost of the solar plant and to assure the lifetime estimation of the receiver. A thermal, mechanical and hydrodynamic analysis of these receivers has been developing in this work, assuming constant heat flux in each axial discretized section of the tube wall but considering circumferential temperature variations in the perimeter of the tubes caused by the difference between the heat flux received by the front part of the tubes and by the rear part. The thermal analysis shows that the radiation losses are higher than in literature, and consequently the thermal efficiency is lower too. This is due to the fact that the effective tube wall temperature for radiation is higher than the mean tube wall temperature, especially if the rear temperature of the tubes is considered. Besides, it has been found that the highest temperatures and thermal stresses are sited on the eastern and western panels of the receivers. Film temperature is the most limiting parameter for the receiver design due to it is responsible for salt decomposition and tube corrosion. Therefore, once the tube material is chosen, the film temperature cannot exceed a critical value over which the corrosion ratio raises rapidly. Small tube diameters and low number of panels results in low film temperatures, although this kind of design increases the pressure drop. Therefore, a compromise between film temperature and pressure drop can lead to a receiver design that ensures its lifetime, and at the same time, optimizes the investment and operational cost of the receiver., The author would like to thank the financial support from CDTI and S2m Solutions for the project MOSARELA (Molten salt receiver lab) whose reference is IDI-20120128. The financial support of the project ENE2012-34255 is also acknowledged., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Improvement of thermal efficiency in cement mortars by using synthetic feldspars

  • Torres Carrasco, Manuel
  • Enríquez, E.
  • Terrón-Menoyo, L.
  • Cabrera, M.J.
  • Muñoz, D.
  • Fernández, J.F.
The use of white cements as a building material is widely employed due to its high whiteness and reflectance. However, building materials should adopt better thermal insulation characteristics to contribute for a significant urban heat-islands mitigation. In this work, synthetic feldspar has been evaluated as partial and total replacement of sand in white cement mortars. Thermal, mechanical, and optical properties of these new mortars are characterized by thermal conductivity, compression resistance test and reflectance-colorimetry, respectively. The replacement of sand by synthetic feldspar allows to obtain white mortars having [almost equal to]18% improvement in solar reflectance. Experiment under solar irradiance of mortars having synthetic feldspars reduce the surface heating of the mortar in 25% and the heating transmission to the rear of the mortar in >55%. Moreover, the high crystallinity of the synthetic feldspar reduces the mortar expansion due alkali-silica reactions (ASR). Improvement in reflectance and thermal conductivity resistance of white cement mortar having synthetic feldspar opens a wide range of building material applications., The authors express their thanks to the Project MAT-2017-86450-C4-1-R, CSIC NANOMIND project CSIC2015-60E068 and projects CDTI (IDI-20130894 and IDI-20161120) for their financial support. Dra. E. Enríquez is indebted to MINECO for a "Torres Quevedo" contract (ref: PTQ-14-07289), which is co-financed with European Social Funds. Dr. M. Torres-Carrasco is also indebted to MINECO for a postdoctoral fellowship "Juan de la Cierva-Formación" (ref: FJCI-2016-28488).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

District cooling network connected to a solar power tower

  • Marugán Cruz, Carolina
  • Sánchez Delgado, Sergio
  • Rodríguez Sánchez, María de los Reyes
  • Venegas Bernal, María Carmen
  • Santana Santana, Domingo José
During the operation of solar power towers there are occasions, commonly in the summer season, where some of the heliostats have to stop focussing on the central receiver, located at the top of the tower, because the maximum thermal power that the receiver can withstand has been reached. The highest cooling demand takes place at these same occasions. In the present paper, the exceeding heliostats are focused to a second receiver, using the extra heat as a source of absorption chillers. The chilled water is used to cool buildings or offices, using a district cooling network, reducing greatly the electricity usage. In this work we have analysed the case of a circular field of heliostats focussing at an external receiver of 120 MW of thermal power. The thermal power of the exceeding heliostats is able to supply steam to eight absorption chillers that produce cold water for a population of more that 90000 people via a network of more than the 50 km. The economical analysis shows that the district cooling system is profitable and an advantageous option for the consumers, that can obtain up to 75% savings on their electricity bills., The authors would like to thank the financial support by the Spanish Ministry of Economy and Competitiveness under Project No. ENE2012-34255 as well as the MOSARELA (Molten salt receiver lab) project, IDI-20120128, supported by CDTI and S2m Solutions., Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Saving assessment using the PERS in solar power towers

  • Rodríguez Sánchez, María de los Reyes
  • Sánchez González, Alberto
  • Marugán Cruz, Carolina
  • Santana Santana, Domingo José
The improvement of the solar power tower using solar salt is one of the main goals of researchers. Any method or invention to improve the efficiency of this technology contributes to promote the renewable energies. The use of a Potential Energy Recovery System (PERS) in two different solar power tower plants of 20 and 100 MW has been analysed. The PERS is formed, at least, by one turbine, located at the hot salt pipe coming from the receiver. The turbine is engaged to the shaft of the feed pump, which raises the heat transfer fluid from the cold tank to the receiver. It reduces the parasitic power consumption of the plant, and increases its global efficiency. Different PERS configurations have been modelled. Based on an energetic and economic analysis, the optimal configuration is a geometrical similar turbine of three times the volume flow rate of one feed pump. The PERS has been proven to be a cost reductive and clean tool. For a 100 MW power plant of 30-year lifetime the investment cost is 1.26 M$ and the annual cash flow is 0.89 M$, while for a plant of 20 MW these values are 0.26 M$ and 0.19 M$, respectively., The financial support from CDTI and S2m Solutions for the MOSARELA Project (Molten salt receiver lab), whose reference is IDI-20120128. Finally, the financial support of the ENE2012-34255 Project is also acknowledged.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Artículo científico (JournalArticle)

Towards more sustainable building based on modified Portland cements through partial substitution by engineered feldspars

  • Enríquez, E.
  • Torres Carrasco, Manuel
  • Cabrera, M.J.
  • Muñoz, D.
  • Fernández, J.F.
Global warming is one of the main problems that facing modern civilization. As buildings consume 40% of total energy, the heating in the cities is a primary concern. Therefore, it seeks to improve sustainable construction materials with better thermal and reflective properties, reducing consumption and heat islands. In this work, mineral and engineered feldspars have been used as partial substitution of white cement, that is widely used in the cladding of façades mainly due to its high whiteness, to improve composites' reflectance and reducing their thermal conductivity. Both feldspars show pozzolanic effect and new composites have superior whiteness and reflectance (greater than12%). Moreover, the engineered feldspar avoids the alkali-silica reaction (ASR) effect in spite of its alkaline content. A reduction of heat of greater than 2 °C after 6 h of solar irradiance is demonstrated for engineered feldspar composite resulting in a good alternative for their implementation as exterior insulation and finish systems., The authors express their thanks to the Project MAT-2017-86450-C4-1-R, CSIC NANOMIND project CSIC2015-60E068 and projects CDTI (IDI-20130894 and IDI-20161120) for their financial support. Dra. E. Enriquez is also indebted to MINECO for a "Torres Quevedo" contract (ref: PTQ-14-07289), which is co-financed with European Social Funds.
Repisalud
Publication Artículo científico (JournalArticle)

Phase I, multicenter, open-label study of intravenous VCN-01 oncolytic adenovirus with or without nab-paclitaxel plus gemcitabine in patients with advanced solid tumors.

  • García-Carbonero, Rocio
  • Bazan-Peregrino, Miriam
  • Gil-Martín, Marta
  • Álvarez, Rafael
  • Macarulla, Teresa
  • Riesco-Martinez, Maria C
  • Verdaguer, Helena
  • Guillén-Ponce, Carmen
  • Farrera-Sal, Martí
  • Moreno, Rafael
  • Mato-Berciano, Ana
  • Maliandi, Maria Victoria
  • Torres-Manjon, Silvia
  • Costa, Marcel
  • Del Pozo, Natalia
  • Martínez de Villarreal, Jaime
  • Real Arribas, Francisco
  • Vidal, Noemí
  • Capella, Gabriel
  • Alemany, Ramon
  • Blasi, Emma
  • Blasco, Carmen
  • Cascalló, Manel
  • Salazar, Ramon
VCN-01 is an oncolytic adenovirus (Ad5 based) designed to replicate in cancer cells with dysfunctional RB1 pathway, express hyaluronidase to enhance virus intratumoral spread and facilitate chemotherapy and immune cells extravasation into the tumor. This phase I clinical trial was aimed to find the maximum tolerated dose/recommended phase II dose (RP2D) and dose-limiting toxicity (DLT) of the intravenous delivery of the replication-competent VCN-01 adenovirus in patients with advanced cancer.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Real-time high-rise building monitoring system using global navigation satellite system technology

  • Quesada Olmo, María Nieves
  • Jiménez-Martínez, Mª Jesús
  • Farjas Abadía, Mercedes
[EN] Continuous assessment of the displacement of a high-rise building enables verification that it meets the structural assumptions calculated in the project, and provides additional useful feedback for structural engineers. Unexpected structural responses during the phases of construction, or once the building is in use, can help detect current and future problems, as well as provide cost savings. Furthermore, it contributes to an improved risk management for natural phenomena and can be used to verify the stability of the structure, providing an additional safety layer for the building. The technological improvement in global navigation satellite system (GNSS) techniques has allowed significant advancements of Gaussian methodologies applied to control the dynamics of building structures in real time, especially for calculating, controlling, and interpreting satellite survey measurements, based on Gaussian analysis and least squares adjustment. The real-time monitoring system works by implementing a local geodetic network with GNSS technology on the structure to be monitored. Algorithms are then applied that improve the compensated network solution, and this is integrated into original software. The system allows us to achieve a high level of safety and effective risk management in real time, as a unique mathematical model that allows GNSS position errors to be reduced is designed for each building. In the case of Torre Espacio, the overall mathematical adjustment model reduces the maximum error by 40%. The system has been installed on a high-rise building, Torre Espacio, in Madrid, Spain, and is fully operational., This research was financially supported by Centre for the Development of Industrial Technology (CDTI) answering to Spanish Ministry of Economy and Competitiveness (EXP.n 0007222/IDI-20131230) and department R & D & I OHL Group. The authors are grateful to the Editor and an anonymous reviewer for their valuable suggestions and constructive comments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Genomic differentiation among varieties of Iberian pig

  • Alonso, Ines
  • Noguera, Jose L.
  • Casellas, Joaquim
  • Martin de Hijas-Villalba, Melani
  • Gracia-Santana, Maria J.
  • Varona, Luis
  • Ibáñez-Escriche, Noelia|||0000-0002-6221-3576
[EN] Aim of study: The objective of this study was to identify the autosomal genomic regions associated with genetic differentiation between three commercial strains of Iberian pig. Area of study: Extremadura (Spain). Material and methods: We used the Porcine v2 BeadChip to genotype 349 individuals from three varieties of Iberian pig (EE, Entrepelado; RR, Retinto; and TT, Torbiscal) and their crosses. After standard filtering of the Single Nucleotide Polymorphism (SNP) markers, 47, 67, and 123 haplotypic phases from EE, RR, and TT origins were identified. The allelic frequencies of 31,180 SNP markers were used to calculate the fixation index (FST) that were averaged in sliding windows of 2Mb. Main results: The results confirmed the greater genetic closeness of the EE and RR varieties, and we were able to identify several genomic regions with a divergence greater than expected. The genes present in those genomic regions were used to perform an Overrepresentation Enrichment Analysis (ORA) for the Gene Ontology (GO) terms for biological process. The ORA indicated that several groups of biological processes were overrepresented: a large group involving morphogenesis and development, and others associated with neurogenesis, cellular responses, or metabolic processes. These results were reinforced by the presence of some genes within the genomic regions that had the highest genomic differentiation. Research highlights: The genomic differentiation among varieties of the Iberian pig is heterogeneous along the genome. The genomic regions with the highest differentiation contain an overrepresentation of genes related with morphogenesis and development, neurogenesis, cellular responses and metabolic processes., Instituto Nacional de Investigacion y Tecnologia Agraria y Alimentaria (INIA), Spain RTA2012-00054-C02-01 Ministry of Science, Innovation and Universities, Spain CGL2016-80155-R; IDI-20170304 (CDTI)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Uso de entornos virtuales para trastornos del neurodesarrollo: una revisión del estado del arte y agenda futura, Use of virtual reality for neurodevelopmental disorders: a review of the state of the art and future agenda

  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Olmos-Raya, Elena
  • Abad, Luis
[EN] To date, the diagnostic tools for autism spectrum disorder (ASD) have been mostly based on qualitative criteria from observational information in contexts with low ecological validity. We are witnessing a growing scientific activity that proposes the use of implicit measures for the evaluation and diagnosis of ASD. These measures are based on processes of a biological and unconscious nature, underlying the capacity of human cognition, and are obtained through the acquisition and treatment of brain, physiological and behavioral responses in order to obtain the behavioral structure of the ASD patient facing a stimulus. The complex relationship between physiological responses and the behavioral structure of the ASD patient requires the use of advanced techniques of signal processing based on cognitive computation. Artificial intelligence (Al) techniques, such as machine learning and neurocomputing applied to the analysis of psychophysiological signals, have demonstrated their robustness for the classification of complex cognitive constructs. Virtual reality (VR) is a tool that allows recreating real-life situations with high sensory fidelity, but at the same time individually controlling each of the situations and stimuli that influence human behavior. It also allows the measurement in real time of human reactions to such stimuli. This document analyzes the latest scientific and technological advances relevant to its applications in the diagnosis of ASD. We conclude that VR is a very valuable tool for ASD research, especially for the evaluation and diagnosis of complex skills and competencies., [ES] Hasta ahora las herramientas diagnósticas de los trastornos del espectro autista (TEA) se basan mayoritariamente en criterios cualitativos de información observacional en contextos con baja validez ecológica. Una creciente actividad científica propone medidas implícitas para la evaluación y diagnóstico del TEA. Dichas medidas se basan en procesos de carácter biológico e inconsciente, subyacentes a la capacidad de cognición humana y son obtenidas a través de la adquisición y tratamiento de respuestas cerebrales, fisiológicas y comportamentales, con el objetivo de obtener la estructura comportamental del paciente TEA ante un estímulo. La compleja relación existente entre respuestas fisiológicas y la estructura comportamental del paciente TEA ante un estímulo, obliga a utilizar técnicas avanzadas de tratamiento de la señal basadas en computación cognitiva. Las técnicas de inteligencia artificial, tales como aprendizaje automático (machine learning) y neurocomputación aplicadas al análisis de señales psicofisiológicas, han demostra do su robustez para la clasificación de complejos constructos cognitivos. La realidad virtual (RV) es una herramienta que permite recrear situaciones de la vida real con una alta fidelidad sensorial, pero al mismo tiempo controlar individualmente cada una de las situaciones y estímulos que influyen en el comportamiento humano. También permite la medición en tiempo real de las reacciones humanas ante tales estímulos. Este documento analiza los últimos avances científicos y tecnológicos relevantes para sus aplicaciones en el diagnóstico del TEA. Afirmamos que la RV es una herramienta muy valiosa para la investigación del TEA, especialmente para la evaluación y diagnóstico de habilidades y competencias complejas., Este trabajo fue apoyado y financiado por el Ministerio de Economía, Industria y Competitividad de España, bajo el título: Herramientas avanzadas terapéuticas para la salud mental (DPI2016-77396-R) y Entorno virtual inmersivo para la evaluación y capacitación de niños con trastorno del espectro autista: T Room (IDI-20170912).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A complete software application for automatic registration of x-ray mammography and magnetic resonance images

  • Solves Llorens, Juan Antonio
  • Rupérez Moreno, María José|||0000-0001-8457-7963
  • Monserrat, C.
  • Feliu, E
  • Garcia, M
  • Lloret, M
Purpose: This work presents a complete and automatic software application to aid radiologists in breast cancer diagnosis. The application is a fully automated method that performs a complete registration of magnetic resonance (MR) images and x-ray (XR) images in both directions (from MR to XR and from XR to MR) and for both x-ray mammograms, craniocaudal (CC), and mediolateral oblique (MLO). This new approximation allows radiologists to mark points in the MR images and, without any manual intervention, it provides their corresponding points in both types of XR mammograms and vice versa. Methods: The application automatically segments magnetic resonance images and x-ray images using the C-Means method and the Otsu method, respectively. It compresses the magnetic resonance images in both directions, CC and MLO, using a biomechanical model of the breast that distinguishes the specific biomechanical behavior of each one of its three tissues (skin, fat, and glandular tissue) separately. It makes a projection of both compressions and registers them with the original XR images using affine transformations and nonrigid registration methods. Results: The application has been validated by two expert radiologists. This was carried out through a quantitative validation on 14 data sets in which the Euclidean distance between points marked by the radiologists and the corresponding points obtained by the application were measured. The results showed a mean error of 4.2 ± 1.9 mm for the MRI to CC registration, 4.8 ± 1.3 mm for the MRI to MLO registration, and 4.1 ± 1.3 mm for the CC and MLO to MRI registration. Conclusions: A complete software application that automatically registers XR and MR images of the breast has been implemented. The application permits radiologists to estimate the position of a lesion that is suspected of being a tumor in an imaging modality based on its position in another different modality with a clinically acceptable error. The results show that the application can accelerate the mammographic screening process for high risk populations or for dense breasts., This project has been partially funded by the Regional Valencian Government (reference ACOMP/2012/181), by CDTI (reference IDI-20101153), and by MICINN (reference TIN2010-20999-C04-01). The authors would like to express our gratitude to the personnel from the HCB and La Fe Hospitals.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Simulation-assisted design of a catalytic hydrogenation reactor for plastic pyrolysis fuels

  • Gala Buro, Alberto Jesus
  • Catalán-Martínez, David
  • Guerrero, Marta
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] An enhancement of the properties of pyrolysis liquids (PL) from municipal plastic waste (mainly low-density polyethylene) by catalytic hydrotreatment is required to obtain automotive quality fuels. In this context, we report the design of a pilot catalytic hydrotreatment reactor using computational fluid dynamics (CFD). This modelling technique considered fluid flows, gas diffusion, olefin hydrogenation reactions, and heat transfer. The built model allowed the development of different sensitive analysis to evaluate the influence of spatial time, heat transfer fluid (used as a reactor coolant) and hydrogen/pyrolysis liquid ratio. Possible phase changes (from gas to liquid) were analyzed by a thermodynamic approach. The results showed that the refrigerant oil allows alleviating possible temperature gradients arising from the exothermic hydrogenation reaction. It was also found that the system can be optimized in order to minimize the energy cost by adjusting the inlet temperature of the reactive gas (H2) and the refrigerant oil flow. Condensations in the reactive chamber could be avoided by working at intermediate pressures (40¿60 bar) and/or increasing the feed of H2. Additionally, the results obtained with the CFD 3D model together with the condensation analysis allowed to optimize the operational regime and the pilot-reactor design in terms of dimensioning and construction materials., The authors acknowledge the financial support of the Centre for the Development of Industrial Technology [grant number IDI -20150730] and the Ministerio de Ciencia, Innovacion y Universidades (Spain) [grant number DI - 16 - 08700]
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization and Distillation of Pyrolysis Liquids Coming from Polyolefins Segregated of MSW for Their Use as Automotive Diesel Fuel

  • Gala, Alberto
  • Guerrero, Marta
  • Guirao, Beatriz
  • Domine, Marcelo Eduardo
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The liquids resulting from pyrolysis of industrial plastic waste (IPW) and postconsumer colored and white plastic film waste (PCPW and PWPW, respectively) at the pilot scale (80 kg/h) were widely characterized by different techniques to assess their potential as both petrochemical raw material and automotive diesel fuel. It was found that pyrolysis liquids mainly consisted of hydrocarbons in the diesel boiling point range (180-380 degrees C), amounting to approximately 50-55 vol %. Therefore, the results were further contrasted with limits established by the EN 590:2014 + A1:2017 standard for automotive diesel fuel. Although pyrolysis liquids showed good properties, they do not conform to some key fuel parameters for diesel engines, such as density, distillation curve, kinematic viscosity, flash point, and cold filter plugging point. To improve these properties, PWPW pyrolysis liquids were distilled in the diesel range and the liquid fractions were characterized according to automotive diesel standards. It was found that the diesel fraction met all specifications with the exception of the cold filter plugging point (-10 to 4 degrees C vs -10 degrees C winter/0 degrees C summer) and density (800-807 vs 820 kg/m(3)). To accomplish these standards, a blend of diesel obtained from PWPW pyrolysis liquids and commercial diesel (50/50 wt %) was also prepared and analyzed. Results revealed that the blend met the requirements of the 21 parameters demanded by the standard for a product to be marketed and used as automotive fuel in diesel engine vehicles., The authors acknowledge the financial support of the Centre for the Development of Industrial Technology (grant number IDI-20150730) and the Ministerio de Ciencia, Innovacion y Universidades (Spain) (grant number DI-16-08700).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of the genetic line and oleic acid-enriched mixed diets on the subcutaneous fatty acid composition and sensory characteristics of dry-cured shoulders from Iberian pig

  • Carrapiso, Ana Isabel
  • Tejeda, Juan Florencio
  • Noguera, Jose Luis
  • Gonzalez, Elena
  • Ibáñez-Escriche, Noelia|||0000-0002-6221-3576
[EN] The aim of this study was to research the effect of the genetic background (Retinto, Torbiscal, and their reciprocal crosses) on the subcutaneous fatty acids and the sensory characteristics of dry-cured shoulders from Iberian pig, and also to investigate whether there is some interaction between genotype and diet composition when pigs are reared indoors, to obtain information to improve the selection strategies for purebred Iberian pig. The genetic background affected both the fatty acid composition (C17:0, C17:1 n-7, C18:3 n-3 and C20:0 were significantly different) and the sensory characteristics (marbling, lean fibrousness, and flavour intensity and persistence were significantly influenced), which indicates that they should be taken into account in the selection strategies for purebred Iberian pig. In a similar way, the genotype x diet composition interaction also should be taken into account when selecting a genetic line or cross to be fed indoors on a particular diet because of its repercussion on the sensory characteristics., The authors gratefully acknowledge INGA FOOD S.A. for their cooperation with the experimental protocol and their technical support. The work was partially funded by the Center for Industrial Technological Development (CDTI) [grant ref. IDI-20140447] and the Institute Nacional de Investigacion y Tecnologia Agraria y Alimentaria (INIA) [grant ref. RTA2012-00054-C02-01], Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Room Temperature Nanoencapsulation of Bioactive Eicosapentaenoic Acid Rich Oil within Whey Protein Microparticles

  • Escobar-García, Juan David
  • Prieto, Cristina
  • Pardo-Figuerez, Maria
  • Lagaron, José M.
[EN] In this study, emulsion electrospraying assisted by pressurized gas (EAPG) has been performed for the first time to entrap ca. 760 nm droplets of the bioactive eicosapentaenoic acid (EPA)-rich oil into whey protein concentrate (WPC) at room temperature. The submicron droplets of EPA oil were encapsulated within WPC spherical microparticles, with sizes around 5 µm. The EPA oil did not oxidize in the course of the encapsulation performed at 25 °C and in the presence of air, as corroborated by the peroxide value measurements. Attenuated Total Reflection-Fourier Transform Infrared spectroscopy and oxygen consumption tests confirmed that the encapsulated EPA-rich oil showed increased oxidative stability in comparison with the free oil during an accelerated oxidation test under ultraviolet light. Moreover, the encapsulated EPA-rich oil showed increased thermal stability in comparison with the free oil, as measured by oxidative thermogravimetric analysis. The encapsulated EPA-rich oil showed a somewhat reduced organoleptic impact in contrast with the neat EPA oil using rehydrated powdered milk as a reference. Finally, the oxidative stability by thermogravimetric analysis and organoleptic impact of mixtures of EPA and docosahexaenoic acid (DHA)-loaded microparticles was also studied, suggesting an overall reduced organoleptic impact compared to pure EPA. The results here suggest that it is possible to encapsulate 80% polyunsaturated fatty acids (PUFAs)-enriched oils by emulsion EAPG technology at room temperature, which could be used to produce personalized nutraceuticals or pharmaceuticals alone or in combination with other microparticles encapsulating different PUFAs to obtain different targeted health and organoleptic benefits., This research was funded by the MICIU (RTI-2018-097249B-C1), EU H2020-MSCA-RISE2017-778388-FODIAC and the EU H2020-EIC-SMEinst-2018-2020-SME instrument-873827-CAPSULTEK, CDTI-CIEN DANTIAN-IDI-20190954 and the CYTED thematic network (319RT0576). J.D.E.-G. wants to thank the Spanish Ministry of Economy, Industry and Competitivity for his predoctoral grant (DI-6906).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Alumina/molybdenum nanocomposites obtained by colloidal synthesis and spark plasma sintering

  • Fernández-González, Daniel
  • Suárez-Menéndez, Marta
  • Piñuela-Noval, Juan
  • Díaz, Luís Antonio
  • Gómez-Rodríguez, Carlos
  • García Quiñonez, Luís V.
  • Fernández-Valdés, Adolfo
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] Alumina/molybdenum nanocomposites were prepared by colloidal synthesis from alumina powder and molybdenum (V) chloride using ethanol as dispersion medium. Modified alumina was calcined at 450 ¿C in air atmosphere to remove chlorides, and then treated in a tubular furnace at 850 ¿C under Ar/H2 to reduce the MoO3 formed in the previous stage and obtain Al2O3 with molybdenum nanoparticles on the surface. Three different molybdenum contents were proposed (1, 5 and 10 wt % Mo), and pure alumina was used as reference, that were sintered by spark plasma sintering (SPS) under vacuum atmosphere at 1400 ¿C for 3 min with an applied pressure of 80 MPa. Composites were characterized by microstructure, hardness, toughness, and three-point bending test. The presence of molybdenum nanoparticles resulted in a fine-grained structure promoted by the presence of molybdenum at grain boundaries and triple points, as well as by the utilization of the SPS equipment. Hardness is at least a 20% greater and fracture toughness 30% larger in the composites than in the monolithic alumina., Daniel Fernandez-Gonzalezacknowledges the grant (Juan de la Cierva-Formacion program) FJC2019-041139-I funded by MCIN/AEI/10.13039/501100011033 (Ministerio de Ciencia e Innovacion, Agencia Estatal de Investigacion). The authors also acknowledge the financial support received from FICYT (IDI/2021/000106). Juan Pinuela Noval acknowledges the Programa Severo Ochoa of Grants for Research and Teaching of the Principality of Asturias for the funds received for the elaboration of the Ph. D. Thesis (Ref: BP20 041).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Welfare implications on management strategies for rearing dairy calves: A systematic review. Part 2 Social management

  • Carulla-Pascual, Patricia
  • Villagrá, Arantxa
  • Blanco-Penedo, Isabel
  • Estellés, F.|||0000-0001-6774-6075
[EN] Introduction: Raising a healthy calf up to puberty is essential for optimal farm performance. It is therefore, it is necessary to promote animal welfare from the three spheres during this short period. Social management has been postulated as essential in lowering stress and consequently improving calf welfare during this period. Only the health sphere has been studied for a long time, but more recent studies have recently promoted positive experiences and emotional states from affective states or cognitive judgment and natural living spheres. A systematic review of different management strategies in rearing dairy calves according to the three spheres of animal welfare has been conducted using an electronic search strategy. Methods: The analysis and extraction of information from the studies were performed according to a protocol. From 1,783 publications screened, only 351 met the inclusion criteria. Results: The publications identified in the search can be divided into two main groups, feeding and social management, based on the main topic of the publication. This review provides an overview of social management, understood as the calf's interaction with others around it. Discussion: Primary social management issues that emerged were social housing with congeners, separation from the mother and human-animal interaction, distributed in the three broad spheres of animal welfare. The review highlights unresolved questions about how social management practices affect the three spheres of animal welfare at this life stage and the need to standardize good socialization practices for this stage. In conclusion, all the information shows that social housing has improved animal welfare from affective states, cognitive judgment, and natural living spheres. However, gaps in research were identified in relation to the optimal time to separate the calf from the mother, the optimal time to group with conspecifics after birth and group size. Further research on positive welfare through socialization are needed., This research was supported by the Centro para el Desarrollo Tecnológico Industrial and Cowvet S.L through project CDTI-IDI20200936. In addition, PC held a grant from the Ph.D. student s research program of the Universitat Politècnica de València (PAID-01-20)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Eye gaze as a biomarker in the recognition of autism spectrum disorder using virtual reality and machine learning: A proof of concept for diagnosis

  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Marín-Morales, Javier|||0000-0003-1271-2892
  • Minissi, Maria Eleonora|||0000-0001-6326-0609
  • CHICCHI-GIGLIOLI, IRENE ALICE
  • Carrasco-Ribelles, Lucia A.
  • Teruel-Garcia, Gonzalo
  • Sirera, Marian
  • Abad, Luis
[EN] The core symptoms of autism spectrum disorder (ASD) mainly relate to social communication and interactions. ASD assessment involves expert observations in neutral settings, which introduces limitations and biases related to lack of objectivity and does not capture performance in real-world settings. To overcome these limitations,advances in technologies (e.g., virtual reality) and sensors (e.g., eye-tracking tools) have been used to create realistic simulated environments and track eye movements, enriching assessments with more objective data than can be obtained via traditional measures. This study aimed to distinguish between autistic and typically developing children using visual attention behaviors through an eye-tracking paradigm in a virtual environment as a measure of attunement to and extraction of socially relevant information. The 55 children participated. Autistic children presented a higher number of frames, both overall and per scenario, and showed higher visual preferences for adults over children, as well as specific preferences for adults¿ rather than children¿s faces on which looked more at bodies. A set of multivariate supervised machine learning models were developed using recursive feature selection to recognize ASD based on extracted eye gaze features. The models achieved up to 86% accuracy (sensitivity = 91%) in recognizing autistic children. Our results should be taken as preliminary due to the relatively small sample size and the lack of an external replication dataset. However, to our knowledge, this constitutes a first proof of concept in the combined use of virtual reality, eye-tracking tools, and machine learning for ASD recognition., Spanish Ministry of Economy, Industry, and Competitiveness-funded project "Immersive Virtual Environment for the Evaluation and Training of Children with Autism Spectrum Disorder: T Room, Grant/Award Number: IDI20170912
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Pak choi (Brassica rapa ssp. Chinensis) glucosinolates profile and bioaccessibility through in vitro dynamic digestion model

  • Nieto, Juan Antonio
  • Hellín, Pilar
  • Valverde, Mariana
  • Pérez, Beatriz
  • Viadel, Blanca
  • Agudelo-Sánchez, Agatha
[EN] Fresh pak choi glucosinolates profile and bioaccessibility was analysed trough an in vitro dynamic digestion model. Fresh pak choi showed an original glucosinolate content of 17.83 +/- 0.39 mg/100 g. A higher contribution to total glucosinolate content in the whole fresh plant was observed for the stem fraction because of a higher representation in the total weight of the sample. Glucobrasicanapin (4.965 +/- 1.195 mg/100 g) and gluconapin (4.618 +/- 1.401 mg/100 g) were found as the principal compounds in the sample, but 4-methoxyglucobrassicin, glucoalysin and glucobrassicin were also determined. After the digestion simulation the glucosinolates bioaccessibility was determined as 54.8%. Aliphatic glucosinolates were the main remained compounds in the bioaccesible fraction of the fresh pak choi sample. The most abundant compounds were glucbrasicanapin (4.380 +/- 2.061 mg/100 g), gluconapin (2.284 +/- 0.177 mg/100 g) and 4-methoxyglucobrassicin (1.438 +/- 0.408 mg/100 g). Hence, pak choi was highlighted as an excellent food source of intact bioaccessible glucosinolates, mainly as aliphatic compounds., This work has been partially financed by the Spanish Institution of Centro Tecnologico para el Desarrollo Industrial (CDTI) through the program Consorcio de Investigacion Empresarial Nacional (Programa CIEN), IDI-20160759
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Contribution of Gray Matter Atrophy and White Matter Damage to Cognitive Impairment in Mildly Disabled Relapsing-Remitting Multiple Sclerosis Patients

  • Bernabeu-Sanz, Angela
  • Sempere, Angel P.
  • Morales, Sandra|||0000-0003-0763-1545
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
[EN] Cognitive impairment (CI) is frequently present in multiple sclerosis patients. Despite ongoing research, the neurological substrates have not been fully elucidated. In this study we investigated the contribution of gray and white matter in the CI observed in mildly disabled relapsing-remitting multiple sclerosis (RRMS) patients. For that purpose, 30 patients with RRMS (median EDSS = 2), and 30 age- and sex-matched healthy controls were studied. CI was assessed using the symbol digit modalities test (SDMT) and the memory alteration test. Brain magnetic resonance imaging, diffusion tensor imaging (DTI), voxel-based morphometry (VBM), brain segmentation, thalamic vertex analysis, and connectivity-based thalamic parcellation analyses were performed. RRMS patients scored significantly lower in both cognitive tests. In the patient group, significant atrophy in the thalami was observed. Multiple regression analyses revealed associations between SDMT scores and GM volume in both hemispheres in the temporal, parietal, frontal, and occipital lobes. The DTI results pointed to white matter damage in all thalamocortical connections, the corpus callosum, and several fasciculi. Multiple regression and correlation analyses suggested that in RRMS patients with mild disease, thalamic atrophy and thalamocortical connection damage may lead to slower cognitive processing. Furthermore, white matter damage at specific fasciculi may be related to episodic memory impairment, This work was supported by the Centro para el Desarrollo Tecnologico Industrial (CDTI, Ministry of Science and Innovation, Spain) under the project BRAIM (IDI-20130020)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sistemas Integrados de Potencia en Buques Offshore: Control, tendencias y retos, Integrated Power Systems for Offshore Vessels. Control, trends and challenges

  • Valera García, Juan José
  • Atutxa Lekue, Íñigo
[EN] The offshore vessels require a high precision speed control and dynamic positioning. Adverse weather conditions and/or rough waves give rise to high disturbances that must be rejected by the control system to keep the vessel position in the area or station where the vessel operation is being executed. Other requirements related to the safety, reliability and robustness must be obviously ensured. Since more than a decade the power system of this kind of vessels is based on a diesel-electric power plant where the propellers and thruster units are controlled by electrical drives. In this power system the required electrical energy/power is generated through diesel gensets, and distributed to the propulsion drives (and to the rest of vessel utility loads) through a power grid. In this work the most commonly used integrated power system architecture is first introduced thus identifying the control functions and their interdependencies. Some trends and new power system topologies to improve the energy efficiency are then also presented and described. The emergence of new solutions based on DC grids allows the diesel gensets to operate at variable speed and makes the integration of the energy storage systems or even some renewable energy systems easier. However, they present some technical and design challenges in order to ensure a stable and robust solution by design. One of them is related to the stability analysis of the DC grid when multiple nonlinear constant power loads (negative impedance) are connected and thus interacting on the same DC bus., [ES] Los buques destinados a realizar operaciones especiales lejos de la costa requieren un control de velocidad y de posicionamiento de alta precisión y respuesta dinámica. Condiciones adversas de oleaje y/o meteorológicas provocan fuertes perturbaciones que el sistema de control debe rechazar para garantizar un posicionamiento preciso (sobre un punto de referencia establecido) mientras el buque realiza la operación. Obviamente, otros requisitos relacionados con la fiabilidad y seguridad también deben ser garantizados. Desde hace más de una década estos buques incorporan sistemas de potencia en los cuales las unidades de propulsión están gobernadas y controladas por accionamientos eléctricos. En estos sistemas, la energía/potencia eléctrica necesaria es producida mediante grupos formados por máquinas de combustión interna y generadores eléctricos, y distribuida, tanto a los accionamientos eléctricos de propulsión como a otras cargas auxiliares del buque, por medio de una red de distribución eléctrica. En la primera parte de este artículo se introduce la topología de Sistema de Potencia más utilizada en este tipo de buques identificando las funciones de control y sus interdependencias. En la segunda parte se presentan las tendencias y soluciones para la reducción del consumo de combustible y las emisiones, destacando las nuevas funciones de control que entran en juego. La reciente irrupción de las topologías basadas en la distribución de potencia mediante red DC facilita la posibilidad de generación de energía a velocidad variable y/o de integración de sistemas de almacenamiento de energía eléctrica. Sin embargo, aparecen nuevos riesgos (mejor retos) técnicos y de control que necesitan un análisis profundo de cara a garantizar un sistema estable y robusto por diseño. Uno de ellos está relacionado con el análisis de la estabilidad del sistema de potencia cuando múltiples cargas no lineales y de impedancia incremental negativa interactúan en un único bus DC.  , Este trabajo es fruto de la realización del proyecto de investigación de título: Sistema de distribución eléctrica de alta eficiencia para aplicaciones marinas (IDI-20140032), siendo cofinanciado a través del programa EEAGRANTS por el CDTI y el Ministerio de Economía y Competitividad.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Method for Liver Segmentation on Computed Tomography Images in Venous Phase Suitable for Real Environments

  • López-Mir, Fernando|||0000-0001-8286-6796
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
  • González Pérez, Pablo
  • Pareja, Eugenia
  • Morales, Sandra
  • Solaz-Minguez, Jaime
Nowadays, different methods are being published for the segmentation of the liver but, in general, most of them are not suitable for clinical practice due to several inconveniences as high computational cost, excessive user dependence or low accuracy. The purpose of this paper is to present the performance and validation of a liver segmentation method in computed tomography images (contrast venous phase) where automation, easy user interaction, and low computational cost (besides the required accuracy for clinical purposes) have been taken into account. Firstly, an adaptive filter based on intrinsic parameters of the liver is applied to reduce noise but preserving external liver gradients. In a second step, from a seed or a group of them, voxels with similar intensities are included in an initial 3D mask. Finally, thanks to the combination of morphological operators in different orientations, several non-liver structures (cava vein, ribs, stomach or heart) are removed and the final 3D liver mask is obtained. Thirty public datasets have been used to estimate the accuracy of the proposed algorithm, twenty for training the method and ten for testing it. An average Jaccard index of 0.91 (±0.03), a Hausdorff distance of 26.68 (±10.42) mm, and a runtime of 0.25 seconds per slice, state a promising efficiency and efficacy in the test datasets. To our knowledge, liver segmentation methods in the state of the art are achieving high accuracy at the expense of requiring an exhaustive training stage and so much clinician interaction time in different steps of the process. In this paper, a method based on intensity properties is carried out with a high grade of automatism, an easy user interaction and a low computational cost. The results obtained for different patients state a low variance and a good accuracy in most images, thus the robustness of the method is demonstrated., Thanks to the Hospital Clinica Benidorm (HCB) for funding this project. This work has been supported by the Centro para el Desarrollo Tecnologico Industrial (CDTI) under the project ONCOTIC (IDI-20101153), partially by the Ministry of Education and Science Spain (TIN2010-20999-004-01).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A multivariate gametic model for the analysis of purebred and crossbred data. An example between two populations of Iberian pigs

  • Srihi, Houssemeddine
  • López-Carbonell, David
  • Casellas, Joaquim
  • Negro, Sara
  • Varona, Luis
  • Ibáñez-Escriche, Noelia|||0000-0002-6221-3576
  • Hernández, Pilar|||0000-0001-7857-7334
[EN] Crossbreeding plays a pivotal role within pig breeding programmes, aiming to maximize heterosis and improve reproductive traits in crossbred maternal lines. Nevertheless, there is evidence indicating that the performance of reciprocal crosses between two genetic lines might exhibit variability. These variations in performance can be attributed to differences in the correlations between gametic effects, acting as either sire or dam, within purebred and crossbred populations. To address this issue, we propose a multivariate gametic model that incorporates up to four correlated gametic effects for each parental population. The model is employed on a data set comprising litter size data (total number of piglets born-TNB- and number of piglets born alive-NBA-) derived from a reciprocal cross involving two Iberian pig populations: Entrepelado and Retinto. The data set comprises 6933 records from 1564 purebred Entrepelado (EE) sows, 4995 records from 1015 Entrepelado x Retinto (ER) crosses, 2977 records from 756 Retinto x Entrepelado (RE) crosses and 7497 records from 1577 purebred Retinto (RR) sows. The data set is further supplemented by a pedigree encompassing 6007 individual-sire-dam entries. The statistical model also included the order of parity (with six levels), the breed of the service sire (five levels) and the herd-year-season effects (141 levels). Additionally, the model integrates random dominant and permanent environmental sow effects. The analysis employed a Bayesian approach, and the results revealed all the posterior estimates of the gametic correlations to be positive. The range of the posterior mean estimates of the correlations varied across different gametic effects and traits, with a range between 0.04 (gametic correlation between the paternal effects for purebred and the maternal for crossbred in Retinto) and 0.53 (gametic correlation between the paternal effects for purebred and the paternal for crossbred in Entrepelado). Furthermore, the posterior mean variance estimates of the maternal gametic effects were consistently surpassed those for paternal effects within all four populations. The results suggest the possible influence of imprinting effects on the genetic control of litter size, and underscore the importance of incorporating crossbred data into the breeding value predictions for purebred individuals., Ministerio de Ciencia e Innovacion, Grant/Award Number: PID2020-114705RB-I00 and CGL2016-80155-R; CDTI, Grant/Award Number: IDI-20170304; European Union's H2020 research and innovation program, Grant/Award Number: 801586
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhancing Psychological Assessments with Open-Ended Questionnaires and Large Language Models: An ASD Case Study

  • Altozano-Fernández, Alberto|||0009-0006-3470-5836
  • Minissi, Maria Eleonora|||0000-0001-6326-0609
  • Gómez-Zaragozá, Lucía|||0000-0001-9885-2559
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Marín-Morales, Javier|||0000-0003-1271-2892
  • Maddalon, Luna
[EN] Open-ended questionnaires allow respondents to express freely, capturing richer information than close-ended formats, but they are harder to analyze. Recent natural language processing advancements enable automatic assessment of open-ended responses, yet its use in psychological classification is underexplored. This study proposes a methodology using pre-trained large language models (LLMs) for automatic classification of open-ended questionnaires, applied to autism spectrum disorder (ASD) classification via parental reports. We compare multiple training strategies using transcribed responses from 51 parents (26 with typically developing children, 25 with ASD), exploring variations in model fine-tuning, input representation, and specificity. Subject-level predictions are derived by aggregating 12 individual question responses. Our best approach achieved 84\% subject-wise accuracy and 1.0 ROC-AUC using an OpenAI embedding model, per-question training, including questions in the input, and combining the predictions with a voting system. In addition, a zero-shot evaluation using GPT-4o was conducted, yielding comparable results, underscoring the potential of both compact, local models and large out-of-the-box LLMs. To enhance transparency, we explored interpretability methods. Proprietary LLMs like GPT-4o offered no direct explanation, and OpenAI embedding models showed limited interpretability. However, locally deployable LLMs provided the highest interpretability. This highlights a trade-off between proprietary models' performance and local models' explainability. Our findings validate LLMs for automatically classifying open-ended questionnaires, offering a scalable, cost-effective complement for ASD assessment. These results suggest broader applicability for psychological analysis of other conditions, advancing LLM use in mental health research., This publication is part of the R&D&I project with reference (IDI20201146), funded by The CDTI of the Spanish MCIU; part of the R&D&I project with reference PID2020-116422RB-C21, funded by MICIU/AEI/10.13039/501100011033; and by the Generalitat Valenciana (CIGE/2023/160). MEM received partial funding by the Generalitat Valenciana (GRISOLIAP/2019/137).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High efficiency wireless video networks for next generation of ENG services

  • Ruiz, Damián
  • Giménez Gandia, Jordi Joan
  • Anaya, Juan J.
  • Fernández, Francisco J.
  • Valdés Francisco J.
  • Beneyto, Javier
  • Martínez Pinzón, Gerardo
  • Gomez-Barquero, David|||0000-0003-2610-7765
  • Barjau-Estevan, Carlos Salvador|||0000-0002-4258-6113
  • Cardona Marcet, Narciso|||0000-0001-5697-1453
This work has been partially funded by the CDTI under the FREEDOM (Servicios de Videocomunicaciones de Alta Eficiencia para Redes Inalámbricas de Nueva Generación en Movilidad) project, with Reference Number IDI20120486.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluation of Operational Parameters in a Pulse Combustor for Industrial Applications

  • Payri, Raul|||0000-0001-7428-5510
  • Falla-Hoyos, Sergio
  • Silvestre Soriano, Elena
  • Lekuona, Aritz
[EN] The scientific community is showing growing interest in pulsed combustion technology due to its superior efficiency, environmental advantages, and diverse applications. Nevertheless, despite its promise, this technology remains underexplored because of its intricate nature and the numerous physicochemical mechanisms involved. This article introduces a pulse combustor, analyzing various power levels as a fundamental component. Each adjustment to operating parameters is shown to profoundly influence overall system behavior. This study advances pulse combustion technologies by addressing challenges, uncovering insights, and shaping future approaches to combustor design, with special attention to the critical role of resonance in the process. Key findings highlight the relationship between pressure fluctuations and temperature distributions, providing valuable insights for optimizing thermal management and enhancing combustor performance. Notably, the study reveals that the average pressure in the combustion chamber peaks at equivalence ratios close to the lower combustion limit (phi = 0.5). These results point to the potential of advanced sensor systems and control mechanisms to dynamically optimize combustor operations, boosting efficiency and reliability in industrial contexts. The innovative strategies presented not only enhance fuel efficiency but also lay the groundwork for more adaptable combustor designs, meeting the critical demand for precise control in challenging environments., The funds for this project were provided by the CDTI-"Centro para el Desarrollo Tecnologico Industrial", which granted a subsidy for the development of this project under identification code IDI-20230151 NEXTPCD-1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Oral microbiome in Proliferative Verrucous Leukoplakia exhibits loss of diversity and enrichment of pathogens

  • Herreros-Pomares, Alejandro|||0000-0003-3838-097X
  • Jantus-Lewintre, Eloisa|||0000-0001-7395-4380
  • Llorens, Carlos
  • Soriano, Beatriz
  • Zhang, Feiyu
  • Gallach, Sandra
  • Bagán, Leticia
  • Murillo, Judith
  • Bagan, José
[EN] Objectives: Oral microbiome plays an important role in oral diseases. Among them, proliferative verrucous leucoplakia (PVL) is an uncommon form of progressive multifocal leukoplakia with a worryingly rate of malignant transformation. Here, we aimed to characterize the oral microbiome of PVL patients and compare it with those of healthy controls. Material and methods: Oral biopsies from ten PVL patients and five healthy individuals were obtained and used to compare their microbial communities. The sequence of the V3-V4 region of 16S rRNA gene was used as the taxonomic basis to estimate and analyze the composition and diversity of bacterial populations present in the samples. Results: Our results show that the oral microbial composition and diversity are significantly different among PVL patients and healthy donors. The average number of observed operational taxonomic units (OTUs) was higher for healthy donors than for PVL, proving a loss of diversity in PVL. Several OTUs were found to be more abundant in either group. Among those that were significantly enriched in PVL patients, potential protumorigenic pathogens like Oribacterium sp. oral taxon 108, Campylobacter jejuni, uncultured Eubacterium sp., Tannerella, and Porphyromonas were identified. Conclusion: Oral microbiome dysbiosis was found in patients suffering from PVL. To the best of our knowledge, this is the first study investigating the oral microbiome alterations in PVL and, due to the limited number of participants, additional studies are needed. Oral microbiota-based biomarkers may be helpful in predicting the risks for the development of PVL., This work was supported by PI19/00790 from Fondo de Inves-tigacion Sanitaria, ISCIII (PI: Jose Bagan) , CB16/12/00350 from CIBERONC and IDI-2020-133875-a from MICINN.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A DASH server-side delay-based representation switching solution to improve the quality of experience for low-latency live video streaming

  • Belda Ortega, Román|||0000-0003-2244-2371
  • Arce Vila, Pau|||0000-0001-5726-9228
  • Guerri Cebollada, Juan Carlos|||0000-0002-5807-1923
  • De Fez, Ismael
[EN] This work addresses the integration of real-time transmission systems, including IP cameras and production systems (like OBS or vMix), that use protocols such as RTSP (Real Time Streaming Protocol) or SRT (Secure Reliable Transport), with content distribution technology based on LL-DASH (Low Latency DASH -Dynamic Adaptive Streaming over HTTP-), taking advantage of the fact that DASH offers significant well-known advan- tages for content distribution over the Internet and via CDNs (Content Delivery Networks). Considering the limitations of the LL-DASH standard regarding the adaptation to network conditions, this paper proposes a new solution called Server-Side Representation Switching (SSRS). SSRS uses an approach based on the server measuring the delay in the requests made by clients, whose variation may be due to a decrease in bandwidth, as occurs in Wi-Fi networks with a high number of clients. To evaluate the effectiveness of the proposed solution, a testbed has been developed that allows the performance evaluation of both the LL-DASH system and the solution based on server-side decision-making. In addition, the developed solution has been compared with known al- gorithms (L2A and LoL+) integrated into the Dash.js player. The results show that the Server-Side Representation Switching solution offers a good trade-off between the transmitted quality and the final delay measured at the client, compared to the other algorithms evaluated. Moreover, it holds the advantage of being straightforward to implement and does not require any modifications to the players used., This work is supported by the Centro para el Desarrollo Tecnologico Industrial (CDTI) from the Government of Spain under the project "Nueva plataforma a bordo basada en redes 5G y Wi-Fi 6 para medios de transporte terrestre" (CDTI IDI-20210624).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Postbiotic Bifidobacterium longum CECT 7347 on Gastrointestinal Symptoms, Serum Biochemistry, and Intestinal Microbiota in Healthy Adults: A Randomised, Parallel, Double-Blind, Placebo-Controlled Pilot Study

  • Naghibi, Malwina
  • Pont-Beltrán, Adrià
  • Lamelas, Araceli
  • Llobregat, Laura
  • Martinez-Blanch, Juan F.
  • Rojas, Antonia
  • Álvarez, Beatriz
  • López Plaza, Bricia
  • Arcos Castellanos, Lucia
  • Chenoll, Empar
  • Vijayakumar, Vineetha
  • Day, Richard
[EN] Objectives: A randomised, double-blind, placebo-controlled pilot trial was conducted to assess the effect of heat-treated Bifidobacterium longum CECT 7347 (HT-ES1) in healthy adults with mild to moderate digestive symptoms. A total of 60 participants were recruited and received either HT-ES1 or an identical placebo for 8 weeks with a further follow-up at week 10. Methods: This study monitored changes in the total Gastrointestinal Symptom Rating Scale for IBS score (GSRS-IBS), Irritable Bowel Syndrome Symptom Severity Scale (IBS-SSS), IBS Quality of Life index (IBS-QoL), gut microbiome using 16S rRNA sequencing, and the Visceral Sensitivity Index, as well as a range of biochemical markers, anthropometric parameters, and adverse events. Results: While minimal changes were observed in gastrointestinal (GI) symptoms, the HT-ES1 group showed a significant decrease in total and non-HDL cholesterol compared to the placebo. The intervention group also exhibited a significant increase in the abundance of the genera Faecalibacterium and Anaerobutyricum, both of which were positively correlated with butyrate concentrations. Faecal calprotectin significantly increased over time in the placebo group but remained stable in the HT-ES1 group. Conclusions: Overall, these findings suggest that HT-ES1 may promote gut health by increasing butyrate-producing bacteria in the gut, maintaining normal levels of faecal calprotectin and reducing serum cholesterol., This study received funding from ADM and the Spanish Ministry of Economy and Competitiveness under the CDTI Project TOLERA IDI-20170876. The funder had the following involvement with the study: study design and writing and reviewing of the manuscript. M.N., A.P.-B., A.L., L.L., J.F.M.-B., A.R., B.& Aacute;., E.C., V.V., and R.D. are employed by ADM.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effectiveness, usability, and cost-benefit of a virtual reality-based telerehabilitation program for balance recovery after stroke: a randomized controlled trial

  • Llorens Rodríguez, Roberto|||0000-0002-8677-8707
  • Colomer, Carolina
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Noe, Enrique
[EN] Objectives: First, to evaluate the clinical effectiveness of a virtual reality (VR) based telerehabilitation program in the balance recovery of individuals with hemiparesis after stroke in comparison with an in-clinic program; second, to compare the subjective experiences; and third, to contrast the costs of both programs. Design: Single-blind, randomized, controlled trial. Setting: Neurorehabilitation unit. Participants: Chronic outpatients with stroke (N=30) with residual hemiparesis. Interventions: Twenty 45-minute training sessions with the telerehabilitation system, conducted 3 times a week, in the clinic or in the home. Main Outcome Measures: First, Berg Balance Scale for balance assessment. The Performance-Oriented Mobility Assessment balance and gait sub-scales, and the Brunel Balance Assessment were secondary outcome measures. Clinical assessments were conducted at baseline, 8 weeks (posttreatment), and 12 weeks (follow-up). Second, the System Usability Scale and the Intrinsic Motivation Inventory for subjective experiences. Third, cost (in dollars). Results: Significant improvement in both groups (in-clinic group [control] and a home-based telerehabilitation group) from the initial to the final assessment in the Berg Balance Scale (eta(2)(p) = .68; P=.001), in the balance (eta(2)(p) = .24; P=.006) and gait (eta(2)(p) =.57, P=.001) subscales of the Tinetti Performance-Oriented Mobility Assessment, and in the Brunel Balance Assessment (control: chi(2)=15.0; P=.002; experimental: chi(2)=21.9; P=.001). No significant differences were found between the groups in any balance scale or in the feedback questionnaires. With regard to subjective experiences, both groups considered the VR system similarly usable and motivating. The in-clinic intervention resulted in more expenses than did the telerehabilitation intervention ($654.72 per person). Conclusions: First, VR-based telerehabilitation interventions can promote the reacquisition of locomotor skills associated with balance in the same way as do in-clinic interventions, both complemented with a conventional therapy program; second, the usability of and motivation to use the 2 interventions can be similar; and third, telerehabilitation interventions can involve savings that vary depending on each scenario. (C) 2015 by the American Congress of Rehabilitation Medicine, Supported in part by the Ministry of Economy and Competitiveness, Project TEREHA (IDI-20110844) and by the Ministry of Education and Science, projects Consolider-C (SET2006-14301/PSIC), "CLBER of Physiopathology of Obesity and Nutrition, an initiative of ISCHI," and the Excellence Research Program PROMETEO (Generalitat Valenciana, Conselleria de Educacion, 2008-157).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Axlebox accelerations: Their acquisition and time frequency characterisation for railway track monitoring purposes

  • Salvador Zuriaga, Pablo|||0000-0002-7824-0368
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
  • Insa Franco, Ricardo|||0000-0002-6655-4458
  • Teixeira, Paulo
[EN] Railway track maintenance is becoming a real challenge for Railway Engineers due to the need of meeting increasingly high quality requirements by means of cost-effective procedures. Frequently, this can be only achieved by implementing some technological developments from other fields into the railway sector, such as Digital Signal Processing. Indeed, the present work delves into data acquisition and processing techniques in order to enhance track surveying processes. For this purpose, run tests on the Metropolitan Rail Network of Valencia (Spain) were carried out, and axlebox accelerations were gathered and analysed in different ways. The results determined the optimal sampling and filtering frequencies as well as the location of accelerometers along the train. Furthermore, by means of spectral analysis and time frequency representations, diverse track defects, track singularities and vibration modes can be clearly identified. It is shown how, with a Hamming time window of 0.5 s and an overlapping of 95%, a wide set of track defects can be detected, without the need of complementary analyses. These values yield the best results as they are a good compromise between time and frequency resolution and allow for appropriate pattern recognition of the corresponding track singularities and resonant frequencies., Project Funded by Geoconcept Co. Ltd. and the Spanish Ministry of Economy and Competitiveness. Ref. IDI-20110461.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Competition Enhances the Effectiveness and Motivation of Attention Rehabilitation After Stroke. A Randomized Controlled Trial

  • Navarro, María Dolores
  • Noé, Enrique
  • Ferri, Joan
  • Llorens Rodríguez, Roberto|||0000-0002-8677-8707
  • Borrego, Adrián|||0000-0001-5134-7811
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
[EN] Attention deficits are among the most common cognitive impairments observed after experiencing stroke. However, a very limited number of studies have investigated the effectiveness of interventions that specifically focus on the rehabilitation of attention deficits among subjects with impaired attention. Although several interventions have included the use of computerized programs to provide dynamic stimuli, real-time performance feedback, and motivating tasks, existing studies have not exploited the potential benefits of multi-user interactions. Group-based and competitive interventions have been reported to be more enjoyable and motivating, depending on individual traits, and may potentially be more demanding, which may increase their effectiveness. This study investigated the effectiveness and motivating abilities of an intervention specifically designed to address attention deficits. This intervention combined paper-and-pencil tasks and interactive, computerized, multi-touch exercises, which were administered, either non-competitively or competitively, to a group of 43 individuals with chronic stroke. The mediating effects of competitiveness were evaluated for both intervention effectiveness and motivation. Participants were randomly sorted into two groups and underwent 20 one-hour group-based sessions, during which they either worked individually or competed with peers, according to their group allocation. Participants were assessed before and after the intervention, using the Conners' Continuous Performance Test, the d2 Test of Attention, the Color Trail Test, the Digit Span Test, and the Spatial Span Test. The competitiveness and subjective experiences of the participants after the intervention were investigated with the Revised Competitiveness Index and the Intrinsic Motivation Inventory, respectively. The results showed that participants who competed demonstrated significantly greater improvements in all cognitive abilities, except for divided attention, and reported greater enjoyment than their non-competitive peers. Both groups reported comparable levels of perceived competence, pressure, and usefulness. Interestingly, the competitiveness of the participants did not alter either the effectiveness or the subjective experience of the intervention. These findings suggest that competition might enhance the effectiveness and enjoyment of rehabilitation interventions designed to address attention deficits in individuals post-stroke, regardless of their level of competitiveness and without having a negative effect on their perceived pressure and competence., This study was funded by Ministerio de Economia y Competitividad of Spain (Project IDI-20110844), by Conselleria de Educacion, Cultura y Deporte of Generalitat Valenciana of Spain (Project SEJI/2019/017) and the European Union through the Operational Program of the European Regional Development Fund (ERDF) of the Valencian Community 2014-2020 (IDIFEDER/2018/029).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evaluating requirements modeling methods based on user perceptions: a family of experiments

  • Abrahao Gonzales, Silvia Mara|||0000-0003-3580-2014
  • Insfran, Emilio|||0000-0003-0855-5564
  • Carsí Cubel, José Ángel|||0000-0002-0277-8188
  • Genero Bocco, Marcela
Numerous methods and techniques have been proposed for requirements modeling, although very few have had widespread use in practice. One drawback of requirements modeling methods is that they lack proper empirical evaluations. This means that there is a need for evaluation methods that consider both the theoretical and practical aspects of this type of methods and techniques. In this paper, we present a method for evaluating the quality of requirements modeling methods based on user perceptions. The evaluation method consists of a theoretical model that explains the relevant dimensions of quality for requirements modeling methods, along with a practical instrument with which to measure these quality dimensions. Basically, it allows us to predict the acceptance of a particular requirements modeling method in practice, based on the effort of applying the method, the quality of the requirements artifacts produced, and the user perceptions with regard to the quality of the method. The paper also presents an empirical test of the proposed method for evaluating a Rational Unified Process (RUP) extension for requirements modeling. That test was carried out through a family of experiments conducted with students and practitioners and provides evidence of the usefulness of the evaluation method proposed. © 2011 Elsevier Inc. All rights reserved., This research has been funded by the following projects: MULTIPLE (MICINN TIN2009-13838), MEDUSAS (CDTI-MICINN and FEDER IDI-20090557), ORIGIN (CDTI-MICINN and FEDER IDI-2010043(1-5)), PEGASO/MAGO (MICINN and FEDER, TIN2009-13718-C02-01), EECCOO (MICINN TRA2009_0074), MECCA (JCMM PII2109-0075-8394) and IMPACTUM (JCCM PEII11-0330-4414).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The whole-body motor skills of children with autism spectrum disorder taking goal-directed actions in virtual reality

  • Minissi, Maria Eleonora|||0000-0001-6326-0609
  • Gómez-Zaragozá, Lucía|||0000-0001-9885-2559
  • Marín-Morales, Javier|||0000-0003-1271-2892
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Mantovani, Fabrizia
  • Sirera, Marian
  • Abad, Luis
  • Cervera-Torres, Sergio
  • Gómez-García, Soledad
  • Chicchi Giglioli, Irene Alice
[EN] Many symptoms of the autism spectrum disorder (ASD) are evident in early infancy, but ASD is usually diagnosed much later by procedures lacking objective measurements. It is necessary to anticipate the identification of ASD by improving the objectivity of the procedure and the use of ecological settings. In this context, atypical motor skills are reaching consensus as a promising ASD biomarker, regardless of the level of symptom severity. This study aimed to assess differences in the whole-body motor skills between 20 children with ASD and 20 children with typical development during the execution of three tasks resembling regular activities presented in virtual reality. The virtual tasks asked to perform precise and goal-directed actions with different limbs vary in their degree of freedom of movement. Parametric and non-parametric statistical methods were applied to analyze differences in children's motor skills. The findings endorsed the hypothesis that when particular goal-directed movements are required, the type of action could modulate the presence of motor abnormalities in ASD. In particular, the ASD motor abnormalities emerged in the task requiring to take with the upper limbs goal-directed actions with low degree of freedom. The motor abnormalities covered (1) the body part mainly involved in the action, and (2) further body parts not directly involved in the movement. Findings were discussed against the background of atypical prospective control of movements and visuomotor discoordination in ASD. These findings contribute to advance the understanding of motor skills in ASD while deepening ecological and objective assessment procedures based on VR., This work was supported by the Spanish Ministry of Economy, Industry, and Competitiveness-funded project T-EYE: Monitoring system for children with ASD based on artificial intelligence and physiological measures (IDI-20201146), and by the project funded by the Ministry of Science and Innovation of Spain ADAPTEA (PID2020- 116422RB-C21). It was also co-founded by the European Union through the Operational Program of the European Regional development Fund (FEDER) of the Valencian Community 2014 2020 (IDIFEDER/2018/029 and IDIFEDER/2021/038). Furthermore, MM received funding by the Valencian Community (GRISOLIAP/2019/137 and CIBEFP/2021/38), and by the Polytechnic University of Valencia (Predoctoral Mobility Grant of 2021). LG-Z received partial funding from the Valencian Community (ACIF/2021/187). JM-M received partial funding from the Polytechnic University of Valencia (PAID-10-20).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Client Applications and Server-Side Docker for Management of RNASeq and/or VariantSeq Workflows and Pipelines of the GPRO Suite

  • Hafez, Ahmed Ibrahem
  • Soriano, Beatriz
  • Elsayed, Aya Allah
  • Futami, Ricardo
  • Ceprian, Raquel
  • Ramos-Ruiz, Ricardo
  • Martínez, Genis
  • Roig, Francisco Jose
  • Torres-Font, Miguel Ángel
  • Naya-Catala, Fernando
  • Calduch-Giner, Josep Alvar
  • Trilla-Fuertes, Lucia
  • Gamez-Pozo, Angelo
  • Arnau, Vicente
  • Perez-Sanchez, Jaume
  • Gabaldon, Toni
  • Llorens, Carlos
  • Sempere Luna, José María|||0000-0003-2393-9224
[EN] The GPRO suite is an in-progress bioinformatic project for -omics data analysis. As part of the continued growth of this project, we introduce a client- and server-side solution for comparative transcriptomics and analysis of variants. The client-side consists of two Java applications called "RNASeq" and "VariantSeq" to manage pipelines and workflows based on the most common command line interface tools for RNA-seq and Variant-seq analysis, respectively. As such, "RNASeq" and "VariantSeq" are coupled with a Linux server infrastructure (named GPRO Server-Side) that hosts all dependencies of each application (scripts, databases, and command line interface software). Implementation of the Server-Side requires a Linux operating system, PHP, SQL, Python, bash scripting, and third-party software. The GPRO Server-Side can be installed, via a Docker container, in the user's PC under any operating system or on remote servers, as a cloud solution. "RNASeq" and "VariantSeq" are both available as desktop (RCP compilation) and web (RAP compilation) applications. Each application has two execution modes: a step-by-step mode enables each step of the workflow to be executed independently, and a pipeline mode allows all steps to be run sequentially. "RNASeq" and "VariantSeq" also feature an experimental, online support system called GENIE that consists of a virtual (chatbot) assistant and a pipeline jobs panel coupled with an expert system. The chatbot can troubleshoot issues with the usage of each tool, the pipeline jobs panel provides information about the status of each computational job executed in the GPRO Server-Side, while the expert system provides the user with a potential recommendation to identify or fix failed analyses. Our solution is a ready-to-use topic specific platform that combines the user-friendliness, robustness, and security of desktop software, with the efficiency of cloud/web applications to manage pipelines and workflows based on command line interface software., This work was supported by the Marie Sklodowska-Curie OPATHY project grant agreement 642095, the pre-doctoral research fellowship from MINECO Industrial Doctorates (Grant 659 DI-17- 09134); Grant TSI-100903-2019-11 from the Secretary of State for Digital Advancement from Ministry of Economic Affairs and Digital Transformation, Spain; the Expedient IDI-2021-158274-a from the Ministry of Science and Innovation, Spain; and the ThinkInAzul program supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat Valenciana (THINKINAZUL/2021/024).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparative Transcriptome Profile between Iberian Pig Varieties Provides New Insights into Their Distinct Fat Deposition and Fatty Acids Content

  • Villaplana-Velasco, Ana
  • Noguera, Jose Luis
  • Pena, Ramona Natacha
  • Ballester, Maria
  • Muñoz, Lourdes
  • González, Elena
  • Tejeda, Juan Florencio
  • Ibáñez-Escriche, Noelia|||0000-0002-6221-3576
[EN] Iberian pigs are meat quality models due to their high fat content, high intramuscular fat, and oleic fatty acid composition. These parameters present great variability and are differentiated among the lines that make up the Iberian pig population. However, there is little information on how the genetic expression influences quality across Iberian varieties. This study aimed to compare the muscle expression profile between two varieties of Iberian pig (Torbiscal and Retinto) and their reciprocal crosses, differentiated by fatness. Our results suggest that the Retinto variety, which has the greatest fat content amongst the studied Iberian varieties, showed a higher expression of genes related to adiposity. Likewise, a higher expression of genes related to lipolysis was found in the Torbiscal variety, described as having less fat content than Retinto. Further genetic variation analysis in these Iberian varieties showed relevant associations for SNP (Single Nucleotide Polymorphism), related to these differentially expressed genes, with the meat quality traits. Thus, our findings evidence that differences in the genetic architecture and expression of Iberian varieties might explain the variability in their fat content and composition and hence, their meat quality. The high deposition of intramuscular fat and the content of oleic fatty acid are characteristic of the Iberian pig. These two parameters present great variability and are differentiated amongst the varieties that make up the Iberian pig population. Although previous studies generated evidence for causal genes and polymorphisms associated to the adipogenic potential of the Iberian pig, there is little information about how genetic expression influences this trait's variability. The aim of this study was to analyses the expression profile between two varieties of Iberian pig (Torbiscal and Retinto) and their reciprocal crosses differentiated in their intramuscular fat (IMF) content and fatty acid (FA) composition in the Longissimus thoracis muscle using an RNA-seq approach. Our results corroborate that the Retinto variety is the fattiest amongst all studied varieties as its upregulated genes, such as FABP3 and FABP5, SLC27A1 and VEGFA among others, contribute to increasing adiposity. In its turn, Torbiscal pigs showed an upregulation of genes associated with the inhibition of fat deposition such as ADIPOQ and CPT1A. Further genetic variation analysis in these Iberian varieties showed relevant associations for SNP located within the differentially expressed genes with IMF and FA content. Thus, the differences found in the genetic architecture and the muscle transcriptome of these Iberian varieties might explain the variability in their fat content and composition and hence, their meat quality., This study was funded by the INIA grant RTA 2012-0054-C02-01* and the Centre for the Development of Industrial Technology grant IDI-20140447.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Antioxidant Responses of Water-Stressed Cherry Tomato Plants to Natural Biostimulants

  • Gil-Ortiz, Ricardo
  • Atares, Sergio
  • Naranjo Olivero, Miguel Angel
  • Vicente, Oscar|||0000-0001-5076-3784
[EN] Biostimulants' application to plants can reduce the damage caused by abiotic factors such as drought or salinity and improve crop yield under these stressful conditions. In this work, several biostimulants, namely Terrabion Aminovit® (a commercial product based on amino acids), potassium fulvate, humic acids, and a seaweed extract, were applied to cherry tomato plants using fertigation at two doses of 0.2 and 1.0 g L¿1. The plants were then subjected to a water stress treatment by completely withholding irrigation for 12 days. After the treatments, all plants were harvested to determine several growth and biochemical parameters. Pre-treatment with all biostimulants protected the tomato plants against dehydration, as indicated by a significant increase in leaf water content compared to the non-irrigated controls. Leaf fresh weight and root water content also increased, except in the plants treated with humic acids, by about 2 fold in plants pre-treated with Terrabion Aminovit® and 1.5 fold in the presence of potassium fulvate and the seaweed extract. The water stress treatment caused a significant increase in leaf proline content, up to 113.6 mol g¿1 DW, approximately 18 fold higher than in well-irrigated control plants; this value was significantly lower in Terrabion Aminovit® pre-treated plants but even higher, ca. 180 mol g¿1 DW, in those treated previously with the seaweed extract. These results indicate that proline is a suitable water stress biomarker in tomatoes and that the biostimulants probably differ in their mode of action, suggesting that the effect of the seaweed extract is mediated by proline accumulation. A significant activation of antioxidant enzymes, namely superoxide dismutase, ascorbate peroxidase, and glutathione reductase, was also observed in water-stressed plants; application of the biostimulants resulted in all cases, in a significant reduction in the specific activities of the three enzymes, indicating reduced levels of drought-induced oxidative stress in the plants. We conclude that applying these biostimulants, particularly Terrabion Aminovit®, may help minimise the adverse effects of water stress on tomatoes by maintaining turgor and improving growth through mechanisms still unknown but which appear to involve, at least in part, enhancing the plants¿ antioxidant defence responses., This work was supported by the Centre for Development of Industrial Technology (CDTI), Spanish Government. Project: Prevention of abiotic stress by potassium biostimulant fertilisers.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Encapsulation of Underexploited Bioactives Using High Throughput Electrospray Assisted by Pressurized Gas with Application Interest in Functional Foods and Nutraceuticals

  • Escobar García, Juan David
[ES] El creciente interés por los alimentos funcionales, suplementos dietéticos y nutracéuticos se debe a la prevalencia de enfermedades crónicas y a la necesidad de soluciones de salud preventiva. Sin embargo, la incorporación de compuestos bioactivos en productos de consumo enfrenta desafíos significativos, como la degradación por factores ambientales y su limitada biodisponibilidad. La encapsulación es una estrategia clave para mejorar la estabilidad y funcionalidad de estos compuestos. Esta investigación explora el potencial de la Atomización Electrohidrodinámica Asistida por Gas Presurizado (EAPG) en la encapsulación de compuestos bioactivos infrautilizados, con un enfoque en tres sustancias: ácido eicosapentaenoico (EPA), un ácido graso omega-3; la savia de sangre de drago (DBS), una resina natural con múltiples propiedades bioactivas; y extracto de camu camu (CCX), rico en vitamina C y polifenoles. En el primer capítulo, se investigó la encapsulación del EPA utilizando EAPG con concentrado de proteína de suero (WPC) como material de recubrimiento. Se logró una mejora significativa en la estabilidad oxidativa, evidenciada en pruebas aceleradas bajo luz ultravioleta. Además, evaluaciones sensoriales en leche en polvo reconstituida confirmaron una reducción de sabores indeseables, optimizada al combinar EPA con DHA encapsulado. El segundo capítulo abordó la estabilidad y encapsulación de la DBS. Se evidenció que factores ambientales como la luz ultravioleta y la alta humedad afectan negativamente su estabilidad. Como estrategia de preservación, se comparó el secado mediante EAPG y liofilización, resultando en una mejor morfología y estabilidad para la DBS tratada con EAPG. Posteriormente, la encapsulación de DBS en WPC y zeína (ZN) permitió obtener micropartículas con mayor protección contra radiación UV y estrés ambiental, destacándose la proporción 2:1 con ZN como matriz de encapsulación. El tercer capítulo se centró en la encapsulación del CCX. El secado mediante EAPG preservó la actividad antioxidante y el contenido de polifenoles solubles totales en comparación con el CCX sin procesar. La encapsulación con WPC y ZN generó micropartículas con mayor estabilidad en condiciones de almacenamiento desafiantes, incluyendo alta humedad y exposición a radiación UV. La formulación con una proporción 2:1 de encapsulante a bioactivo mostró la mejor protección. Los resultados demuestran el potencial de la tecnología EAPG para producir micropartículas uniformes a temperatura ambiente, asegurando la preservación de compuestos sensibles al calor. Además, esta investigación resalta la importancia de los materiales de encapsulación, como WPC y ZN, en el desarrollo de soluciones personalizadas para distintos bioactivos. Más allá de su impacto tecnológico, esta metodología ofrece un enfoque escalable y rentable para la industria de alimentos funcionales y suplementos dietéticos, contribuyendo a la formulación de productos con mayor estabilidad, biodisponibilidad y aceptación por parte del consumidor., [CA] La demanda d'aliments funcionals, suplements dietètics i nutracèutics ha augmentat per la creixent prevalença de malalties cròniques i un canvi social cap a la salut preventiva. No obstant això, la incorporació de compostos bioactius en productes de consum presenta desafiaments, com la degradació ambiental i la seua limitada biodisponibilitat. L'encapsulació és una estratègia prometedora per millorar l'estabilitat i preservar la bioactivitat. Aquesta investigació explora el potencial de l'Electrospray Assistit per Gas Pressuritzat (EAPG) per encapsular compostos bioactius infrautilitzats. L'estudi se centra en tres substàncies: l'àcid eicosapentaenoic (EPA), un àcid gras omega-3; la saba de sang de drago (DBS), una resina natural amb múltiples propietats bioactives; i l'extracte de camu camu (CCX), ric en vitamina C i polifenols. En el primer capítol, l'encapsulació de l'EPA amb EAPG i concentrat de proteïna de sèrum (WPC) va millorar l'estabilitat oxidativa, com es va demostrar en proves accelerades amb llum ultraviolada. A més, una avaluació sensorial en llet en pols reconstituïda va confirmar una reducció significativa dels sabors indesitjables, especialment quan es combinava amb DHA encapsulat. El segon capítol aborda l'estabilitat, assecat i encapsulació de la DBS. Es va observar que la llum UV i la humitat elevada afecten la seua estabilitat, destacant la necessitat d'estratègies de protecció. Es va comparar l'assecat per EAPG i la liofilització, obtenint millor morfologia i estabilitat amb EAPG. Posteriorment, la DBS es va encapsular en WPC i zeïna (ZN), donant lloc a micropartícules esfèriques amb protecció superior contra la radiació UV, especialment amb una proporció 2:1 de ZN com a matriu d'encapsulació. El tercer capítol tracta sobre l'assecat i encapsulació del CCX. L'assecat per EAPG va preservar l'activitat antioxidant i els polifenols solubles totals en comparació amb el CCX sense processar. L'encapsulació amb WPC i ZN va generar micropartícules més estables en condicions d'emmagatzematge adverses, com humitat elevada i radiació UV. La formulació amb una relació 2:1 encapsulant-bioactiu va oferir la millor protecció. Els resultats destaquen la versatilitat de la tecnologia EAPG per produir micropartícules uniformes a temperatura ambient, preservant la bioactivitat de compostos sensibles a la calor. A més, es ressalta la importància dels materials d'encapsulació, com WPC i ZN, per desenvolupar solucions personalitzades segons el compost bioactiu. Aquesta investigació introdueix una metodologia escalable i rendible per a la indústria d'aliments funcionals i suplements dietètics, permetent productes amb millor estabilitat, major biodisponibilitat i més acceptació per part del consumidor., [EN] The demand for functional foods, dietary supplements, and nutraceuticals has increased due to the rising prevalence of chronic diseases and a societal shift toward preventive health solutions. However, incorporating bioactive compounds into consumer products presents challenges, including degradation from environmental stressors and limited bioavailability. Encapsulation offers a promising strategy to enhance stability and preserve bioactivity. This doctoral research explores the potential of Electrospraying Assisted by Pressurized Gas (EAPG) for encapsulating underutilized bioactive compounds. The study focuses on three bioactives: eicosapentaenoic acid (EPA), an omega-3 fatty acid; Dragon's Blood Sap (DBS), a natural resin with diverse bioactive properties; and camu camu extract (CCX), rich in vitamin C and polyphenols. In the first chapter, EPA encapsulation via EAPG with whey protein concentrate (WPC) improved oxidative stability, as confirmed by accelerated tests under UV light. Sensory evaluation in reconstituted powdered milk showed a significant reduction in undesirable off-flavors, further enhanced when combined with encapsulated DHA. The second chapter examines DBS stability, drying, and encapsulation. UV exposure and high humidity caused notable degradation, emphasizing the need for protective strategies. Freeze-drying and EAPG were compared, with EAPG providing better morphology and stability. Encapsulation of DBS in WPC and zein (ZN) resulted in spherical microparticles with superior UV protection, particularly at a 2:1 ZN-to-bioactive ratio. The third chapter focuses on CCX drying and encapsulation. EAPG drying produced irregular yet functional structures, preserving antioxidant activity and polyphenols. Encapsulation in WPC and ZN formed spherical microparticles with enhanced stability, especially at a 2:1 encapsulant-to-bioactive ratio, protecting against humidity and UV radiation. The findings highlight EAPG's versatility for producing uniform microparticles at room temperature, preserving heat-sensitive bioactives. This research underscores the critical role of encapsulation materials like WPC and ZN in developing tailored stabilization strategies. Beyond technological advances, this scalable and cost-effective methodology lays the foundation for functional food and supplement development, extending shelf life, improving bioavailability, and meeting consumer demand for clean-label products., The author would like to thank the Spanish Ministry of Economy, Industry, and Competitivity for his predoctoral grant (DI-6906). The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIU/AEI/10.13039/501100011033 is also fully acknowledged. This research was funded by the MICIU (RTI-2018-097249B-C1), EU H2020-MSCA-RISE-2017-778388-FODIAC and the EU H2020-EIC-SMEinst-2018-2020-SME instrument-873827-CAPSULTEK, CDTI-CIEN DANTIAN-IDI-20190954 and the CYTED thematic network (319RT0576).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Assessment of the autism spectrum disorder based on machine learning and social visual attention: a systematic review

  • Minissi, Maria Eleonora|||0000-0001-6326-0609
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • CHICCHI-GIGLIOLI, IRENE ALICE
  • Mantovani, Fabrizia
[EN] The assessment of autism spectrum disorder (ASD) is based on semi-structured procedures addressed to children and caregivers. Such methods rely on the evaluation of behavioural symptoms rather than on the objective evaluation of psychophysiological underpinnings. Advances in research provided evidence of modern procedures for the early assessment of ASD, involving both machine learning (ML) techniques and biomarkers, as eye movements (EM) towards social stimuli. This systematic review provides a comprehensive discussion of 11 papers regarding the early assessment of ASD based on ML techniques and children¿s social visual attention (SVA). Evidences suggest ML as a relevant technique for the early assessment of ASD, which might represent a valid biomarker-based procedure to objectively make diagnosis. Limitations and future directions are discussed., The authors have no relevant financial or non-financial interests to disclose. This work was supported by the Spanish Ministry of Economy, Industry, and Competitiveness funded project "Immersive Virtual Environment for the Evaluation and Training of Children with Autism Spectrum Disorder: T Room" (IDI-20170912). This work was also supported by the Spanish Ministry of Science and Innovation funded project "T-EYE: Monitoring system for children with ASD based on artificial intelligence and physiological measures" (IDI-20201146)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

In vitro and in vivo comparison of phytic acid dephosphorylation mechanisms by 3-and 6-phytases in broiler diets

  • Tomé-Rodríguez, Sonia
  • Ledesma-Escobar, Carlos Augusto
  • Carpintero, Laura
  • Dupuy, Javier
  • Donadeu, Andres
  • Macias-Vidal, Judith
  • Priego-Capote, Feliciano
  • Cambra López, María|||0000-0001-6130-9392
  • Pascual Amorós, Juan José|||0000-0002-7224-9978
[EN] Diets for farmed monogastric animals are supplemented with phytase to improve the bioavailability of phosphorus. Commercially, 6-phytases are preferred over 3-phytases due to differences in their sources, kinetics, and optimal operational pH. We examined both in vitro and in vivo dephosphorylation of phytate phosphorus by 3- and 6-phytases using high-resolution mass spectrometry to identify phytic acid, inositol phosphate intermediates, and free inositol. In vitro, 3-phytases exhibited conversion rates similar to those of 6-phytases, converting over 95 % of phytic IP6 into IP2 or IP1 within one hour. However, mechanistic differences between the two enzymes were observed in vivo. For example, broilers fed 6-phytase exhibited higher levels of inositol in the crop and gizzard than those fed 3-phytase (3.1 mg/g vs 2.4 mg/g). No significant differences were observed in the ileum of animals supplemented with either phytase (approximately 9 mg/g). Overall, 3-phytases can be an effective alternative to the more commonly used 6phytases for releasing phytate phosphorus in broiler diets., This study has been developed under the framework of the project entitled "Development of a new form of incorporation of phosphorus for a precision nutrition in poultry: Phosphated Phytase", IDI- 20200061, corresponding to the R&D projects call, funded by CDTI (Centre for Technological Development and Innovation) , supported by the Ministry of Science and Innovation and co-financed by FEDER funds (European Regional Development Fund) within the 2014-2020 Intelligent Growth Operational Program. Methodological development was funded by the Spanish Ministerio de Ciencia e Innovacion (PID2019-111373RB-I00 project).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of several biomechanical models for the simulation of lamb liver behaivour using similarity coefficients from medical image

  • Martínez Martínez, Francisco
  • Lago Ángel, Miguel Ángel
  • Rupérez Moreno, María José|||0000-0001-8457-7963
  • C. Monserrat|||0000-0003-1790-8085
In this study, six biomechanical models for simulating lamb liver behaviour are presented. They are validated using similarity coefficients from Medical Image on reconstructed volumes from computerised tomography images. In particular, the Jaccard and Hausdorff coefficients are used. Loads of 20 and 40 g are applied to the livers and their deformation is simulated by means of the finite element method. The models used are a linear elastic model, a neo-Hookean model, a Mooney¿Rivlin model, an Ogden model, a linear viscoelastic model and a viscohyperelastic model. The model that provided a behaviour that is closest to reality was the viscohyperelastic model, where the hyperelastic part was modelled with an Ogden model., This project has been partially funded by MITYC (reference TSI-020100-2009-189), by CDTI (reference IDI-20101153) and by MICINN (reference TIN2010-20999-C04-01). We would like to express our gratitude to the personnel from the HCB hospital where the experiments with the CT Machine were carried out.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Bayesian Multivariate Gametic Model in a Reciprocal Cross with Genomic Information: An Example with Two Iberian Varieties

  • Srihi, Houssemeddine
  • López-Carbonell, David
  • Casellas, Joaquim
  • Negro, Sara
  • Varona, Luis
  • Ibáñez-Escriche, Noelia|||0000-0002-6221-3576
  • Hernández, Pilar|||0000-0001-7857-7334
[EN] INGA FOOD, S.A. initiated a crossbreeding program between two Iberian pig varieties, Retinto (R) and Entrepelado (E), with the goal of producing a hybrid sow (F1). Several studies have been conducted to evaluate its productive performance, and these studies have revealed differences in litter size between the two reciprocal crosses, suggesting the presence of genomic imprinting effects. To further investigate these effects, this study introduces a multivariate gametic model designed to estimate gametic correlations between paternal and maternal effects originating from both genetic backgrounds involved in the reciprocal crosses. The dataset consisted of 1258 records (the total number born-TNB and the number born alive-NBA) from 203 crossbred dams for the Entrepelado (sire) x Retinto (dam) cross and 700 records from 125 crossbred dams for the Retinto (sire) x Entrepelado (dam) cross. All animals were genotyped using the GeneSeek((R)) GPP Porcine 70 K HDchip (Illumina Inc., San Diego, CA, USA). The results indicated that the posterior distribution of the gametic correlation between paternal and maternal effects was distinctly different between the two populations. Specifically, in the Retinto population, the gametic correlation showed a positive skew with posterior probabilities of 0.78 for the TNB and 0.80 for the NBA. On the other hand, the Entrepelado population showed a posterior probability of a positive gametic correlation between paternal and maternal effects of approximately 0.50. The differences in the shape of the posterior distribution of the gametic correlations between paternal and maternal effects observed in the two varieties may account for the distinct performance outcomes observed in the reciprocal crosses., The research was partially funded by grants CGL2016-80155-R, PID2020-114705RB-I00 (Ministerio de Ciencia e Innovación), and IDI-20170304 (CDTI). Srihi received funding from the European Union s H2020 research and innovation program under a Marie Sklodowska Curie grant agreement, No. 801586.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of post-consumer plastic film waste from mixed MSW in Spain: A key point for the successful implementation of sustainable plastic waste management strategies

  • Gala, Alberto
  • Guerrero, Marta
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The purpose of this paper is to provide a full characterization of post-consumer plastic film recovered from mixed municipal solid waste (MSW) treatment plants in Spain. Currently, this type of plastic waste is not recycled due to technical or economic barriers and is still sent to landfill. Different types of municipal plastic waste (MPW) from manual and automated sorting were studied: i) colour plastic film recovered by ballistic separators and then manual sorting in different seasons; ii) colour plastic film recovered by automated sorting (air suction); and iii) white plastic film from primary manual sorting process. The samples were characterized by different techniques, including the ultimate and proximate analysis, Higher Heating Value (HHV) and Lower Heating Value (LHV), metal content, Thermogravimetric Analysis (TGA) and Derivative Thermogravimetry (DTG), Fourier Transform Infrared (FT-IR) analysis and Differential Scanning Calorimetry (DSC). The results were compared to those obtained for pretreated colour and white plastic film waste and contrasted with industrial recycled film granules of polyethylene (as a reference material for packaging film). Additionally, pretreated plastic film samples were also characterized by analyzing viscosity, Pressure-Volume-Temperature (PVT) diagram, specific heat capacity and halogen and sulphur contents. Characterization data from this study will contribute to identify and develop potential recycling alternatives for a more sustainable municipal plastic waste management, which is recognized as a priority in the European Circular Economy Action Plan to use resources in a more sustainable way., The authors acknowledge the financial support of the Centre for the Development of Industrial Technology [grant number IDI - 20181081] and the Ministerio de Ciencia, Innovacion y Universidades (Spain) [grant number DI - 16 - 08700].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Automation of thermographic 3D modelling through image fusion and image matching techniques

  • Lagüela, S.
  • Armesto, J.
  • Arias, P.
  • Herráez Boquera, José
[EN] Infrared thermography has proved to be an adequate technique for building inspection, as it can be used to determine energy efficiency and also to detect defects in construction. Geometry and spatial relationships are also very important in building inspection because they make location of thermal defects and measurement of affected surfaces possible. A procedure to fuse automatically generated infrared mosaics and visible images to combine geometric information with thermal data in the same image is described in this paper. Fused images are then used for the automatic generation of a thermographic 3D model of the building through image matching, where apart from having thermographic information available, geometric measurements can be performed. The proposed methodology is suitable for building inspection, where working space and time are usually limited so a reduction on the number and size of instruments is appreciated. Furthermore, automation of the process diminishes the error in results by avoiding operator's influence., The authors would like to give thanks to Conselleria de Economia e Industria (Xunta de Galicia), Ministerio de Economia y Competitividad and CDTI (Gobierno de Espana) for the financial support given; human resources programs (FPU AP2009-1144) and projects (INCITE 10TMT 011CT, INCITE 10REM033E, IDI-20101770). All the programs are cofinanced by the Fondo Europeo para el Desarrollo Regional (FEDER).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

In situ test: cotton sheets against mosquito bites in India

  • Bonet-Aracil, Marilés|||0000-0002-8743-560X
  • Bou-Belda, Eva|||0000-0003-1461-9296
  • Gisbert Paya, Jaime|||0000-0002-0950-8965
  • IBAÑEZ GARCIA, FRANCISCO
[EN] Historically, fabrics were considered as a source of warmth and protection against weather conditions. Nowadays, fabrics can be converted into smart textiles and through this process new properties are conferred to them. For that purpose, microcapsules can play an important role in that they can be used within many application areas including medicine or pharmaceuticals. Malaria, dengue fever and other diseases are typically spread through mosquito bites. This is a concern of many authorities in affected countries and significant research is being conducted today in order to reduce incidence. The aim of the study reported here is not only to demonstrate the effectiveness of microcapsules on cotton fabrics as a prevention to mosquito bites but also to test this in situ. Different fabrics were prepared and tested in two Indian regions. Laboratory tests were performed according to a standard designed by the Swiss Tropical laboratory. Results demonstrated that the fabrics repellence to mosquitos could be considered as very good and that the repellent effect of the microcapsules was maintained for more than 10 laundry cycles. Furthermore, our experiments conducted in situ confirmed the effectiveness of the technology., The authors would like to express their gratitude to the "Fundacion Vicente Ferrer" and to the project CDTI IDI/20090482. Authors would also acknowledge Electron Microscopy Service of the UPV for their professional support on the SEM images analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Estudio experimental a escala de planta piloto del proceso de valorización termoquímica de residuos plásticos urbanos

  • Gala Buro, Alberto Jesús
[ES] La presente Tesis Doctoral se ha centrado en la demostración de la viabilidad técnica de un proceso de valorización de residuos plásticos de tipo poliolefínico a una escala de planta piloto y en un entorno industrial (TRL 7). Los residuos plásticos objeto del estudio han sido plásticos post-consumo de tipo film segregados de la corriente mezclada de residuos sólidos urbanos (RSU), también usualmente denominada fracción resto o fracción "todo uno". La realización de la presente Tesis Doctoral se enmarca dentro del programa "Ayudas para la formación de doctores en empresas - Doctorados Industriales" del Ministerio de Economía, Industria y Competitividad y está integrada en el marco de una línea de investigación estratégica para la empresa URBASER S.A (empresa líder en gestión de residuos sólidos urbanos en España y con presencia en más de 20 países). Dicha línea estratégica comprende el paso del residuo al recurso bajo el concepto de economía circular. En este contexto, la Tesis Doctoral se centra en el estudio experimental del proceso de pirólisis prestando especial atención a la puesta en marcha y operación de la instalación experimental y a la caracterización de los materiales de partida y de los productos obtenidos. Las principales tareas desarrolladas y resultados obtenidos en esta investigación se han plasmado en una serie de publicaciones científicas que han permitido presentar la Tesis Doctoral en el formato de "Compendio de artículos". En el primer capítulo se aborda la problemática actual de la generación de residuos plásticos urbanos, en particular del plástico tipo film, y se evalúan las diferentes alternativas existentes para su gestión sostenible, estableciendo el interés del estudio realizado y los objetivos perseguidos. El segundo capítulo corresponde a la publicación "Characterization of post-consumer plastic film waste from mixed MSW in Spain: A key point for the implementation of circular economy strategies", en la que se caracterizan las materias primas de interés para el proceso y las que se han utilizado como alimentación en las diferentes pruebas realizadas en la planta piloto. En el tercer capítulo, buscando ofrecer una visión completa de la investigación, se ha prescindido del formato artículo y se ha incluido una breve descripción del sistema experimental y un resumen del proceso que se ha seguido para llevar a cabo la puesta en marcha y operación de la instalación, junto con la metodología experimental empleada y los principales resultados obtenidos. El cuarto capítulo lo integra la publicación "Characterization and distillation of pyrolysis liquids coming from polyolefins segregated of MSW: Using as automotive diesel fuel", en la que se realiza una caracterización de los líquidos de pirólisis obtenidos en la planta piloto a partir de diferentes alimentaciones de plástico (principalmente polietileno de baja densidad) y sus fracciones destiladas, analizando las diferentes opciones para utilizarlos tanto como materia prima para la industria petroquímica como para su empleo como combustible de automoción. En el quinto capítulo se ha recogido la publicación "Simulation-assisted design of a catalytic hydrogenation reactor for plastic pyrolysis fuels", en la que se realiza un análisis de una de las posibilidades de upgrading de los líquidos de pirólisis bajo la perspectiva de la fluidodinámica computacional, estudiando el proceso catalítico de hidrogenación de olefinas mediante un modelo avanzado de un reactor multi-tubular., [CA] This PhD thesis aims to the development of a polyolefinic plastic valorization process. The technical viability of the process at pilot scale and in an industrial-relevant environment (TRL 7) has been shown. The focus of this work is on post-consumer plastic film originating from household waste and collected as part of mixed municipal solid waste (MSW). The works conducted during the PhD thesis are under the state programme "Ayudas para la formación de doctores en empresas - Doctorados Industriales" funded by the Ministerio de Economía, Industria y Competitividad. These works support the URBASER's strategy (Circular economy: from waste to resource) and are focused on the pilot plant commissioning, start-up and operation, as well as the characterization of feedstocks and products. The main tasks and results have been gathered in a number of papers, which allows this PhD thesis to be submitted in a "papers compendium" format. Chapter 1 deals with the current concerns about the generation of municipal plastic waste. In particular, it looks at the plastic film to evaluate the main available alternatives for sustainable management. This is in order to establish the interest of the study conducted and the objectives pursued. Chapter 2 includes the paper "Characterization of post-consumer plastic film waste from mixed MSW in Spain: A key point for the implementation of circular economy strategies", which comprises some characterizations of the targeted raw materials for the pyrolysis process and of the feedstocks used at pilot plant. Chapter 3, which is not in paper format, completes the previous chapter in order to give oversight of the investigation. It includes a description of the experimental facility, the steps taken to carry out the start-up and operation of the pilot plant, the experimental methodology, and the main experimental results. In this chapter, a developed patent from the pyrolysis process has also been included. In Chapter 4, the product characterization is shown in the paper "Characterization and distillation of pyrolysis liquids coming from polyolefins segregated of MSW: Using as automotive diesel fuel". These characterizations cover the pyrolysis liquids and their distilled fractions obtained from different feedstocks analyzed from two points of view according to the most feasible options: as raw material for the petrochemical industry and as diesel automotive fuel. The paper "Simulation-assisted design of a catalytic hydrogenation reactor for plastic pyrolysis fuels" makes up Chapter 5. This paper explores one of several upgrade options for the pyrolysis liquids consisting of catalytic olefin hydrogenation under a fluid dynamic computational perspective by developing an advanced simulation model for a catalytic multi-tubular reactor., [EN] La present Tesi Doctoral s'ha centrat en la demostració de la viabilitat tècnica d'un procés de valorització de residus plàstics de tipus poliolefínico a una escala de planta pilot i en un entorn industrial (TRL 7). Els residus plàstics objecte de l'estudi han sigut plàstics post-consum de tipus film segregats del corrent mesclat de residus sòlids urbans (RSU), també usualment denominada fracció reste o fracció "tot un". La realització de la present Tesi Doctoral s'emmarca dins del programa "Ayudas para la formación de doctores en empresas - Doctorados Industriales" del Ministeri d'Economia, Indústria i Competitivitat i està integrada en el marc d'una línia d'investigació estratègica per a l'empresa URBASER S.A (empresa líder en gestió de residus sòlids urbans a Espanya i amb presència en més de 20 països). Aquesta línia estratègica comprén el pas del residu al recurs sota el concepte d'economia circular. En aquest context, la Tesi Doctoral es centra en l'estudi experimental del procés de piròlisi prestant especial atenció a la posada en marxa i operació de la instal·lació experimental i a la caracterització dels materials de partida i dels productes obtinguts. Les principals tasques desenvolupades i resultats obtinguts en aquesta investigació s'han plasmat en una sèrie de publicacions científiques que han permés presentar la Tesi Doctoral en el format de "Compendi d'articles". En el primer capítol s'aborda la problemàtica actual de la generació de residus plàstics urbans, en particular del plàstic tipus film, i s'avaluen les diferents alternatives existents per a la seua gestió sostenible, establint l'interés de l'estudi realitzat i els objectius perseguits. El segon capítol correspon a la publicació "Characterization of post-consumer plastic film waste from mixed MSW in Spain: A key point for the implementation of circular economy strategies", en la qual es caracteritzen les matèries primeres d'interés per al procés i les que s'han utilitzat com a alimentació en les diferents proves realitzades en la planta pilot. En el tercer capítol, buscant oferir una visió completa de la investigació, s'ha prescindit del format article i s'ha inclòs una breu descripció del sistema experimental i un resum del procés que s'ha seguit per a dur a terme la posada en marxa i operació de la instal·lació, juntament amb la metodologia experimental empleada i els principals resultats obtinguts. El quart capítol integra la publicació "Characterization and distillation of pyrolysis liquids coming from polyolefins segregated of MSW: Using as automotive dièsel fuel", en la qual es realitza una caracterització dels líquids de piròlisis obtinguts en la planta pilot a partir de diferents alimentacions de plàstic (principalment polietilé de baixa densitat) i les seues fraccions destil·lades, analitzant les diferents opcions per a utilitzar-los tant com matèria primera per a la indústria petroquímica com per al seu ús com a combustible d'automoció. En el cinqué capítol s'ha recollit la publicació "Simulation-assisted design of a catalytic hydrogenation reactor for plastic pyrolysis fuels", en la qual es realitza una anàlisi d'una de les possibilitats de millora de la calitat dels líquids de piròlisis sota la perspectiva de la fluidodinámica computacional, estudiant el procés catalític d'hidrogenació d'olefines mitjançant un model avançat d'un reactor multi-tubular., El presente trabajo se ha realizado de manera conjunta en URBASER, S. A. y en el Instituto de Tecnología Química (ITQ) – Universidad Politécnica de Valencia, bajo la dirección de la Doctora Marta Guerrero Álvarez, por parte de URBASER, S. A. y del Doctor José Manuel Serra Alfaro, por parte del ITQ. Los trabajos realizados durante la realización de esta Tesis Doctoral han sido financiados en parte por el Ministerio de Ciencia, Innovación y Universidades a través del programa “Ayudas para la formación de doctores en empresas – Doctorados Industriales” (DI – 16 – 08700) y por el Centro para el Desarrollo Tecnológico Industrial a través de los proyectos “Del residuo al recurso mediante el reciclaje” 3R2020+ (IDI – 20150730) y “Economía circular para la valorización de los residuos plásticos urbanos” CEUS (IDI –20181081) dentro del programa estratégico de Consorcios de Investigación Empresarial Nacional (CIEN).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Liver segmentation in MRI: a fully automatic method based on stochastic partitions

  • López-Mir, Fernando|||0000-0001-8286-6796
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Angulo, J.
  • Luna, L.
There are few fully automated methods for liver segmentation in magnetic resonance images (MRI) despite the benefits of this type of acquisition in comparison to other radiology techniques such as computed tomography (CT). Motivated by medical requirements, liver segmentation in MRI has been carried out. For this purpose, we present a new method for liver segmentation based on the watershed transform and stochastic partitions. The classical watershed over-segmentation is reduced using a marker-controlled algorithm. To improve accuracy of selected contours, the gradient of the original image is successfully enhanced by applying a new variant of stochastic watershed. Moreover, a final classifier is performed in order to obtain the final liver mask. Optimal parameters of the method are tuned using a training dataset and then they are applied to the rest of studies (17 datasets). The obtained results (a Jaccard coefficient of 0.91 +/- 0.02) in comparison to other methods demonstrate that the new variant of stochastic watershed is a robust tool for automatic segmentation of the liver in MRI. (C) 2014 Elsevier Ireland Ltd. All rights reserved., This work has been supported by the MITYC under the project NaRALap (ref. TSI-020100-2009-189), partially by the CDTI under the project ONCOTIC (IDI-20101153), by Ministerio de Educacion y Ciencia Spain, Project Game Teen (TIN2010-20187) projects Consolider-C (SEJ2006-14301/PSIC), "CIBER of Physiopathology of Obesity and Nutrition, an initiative of ISCIII" and Excellence Research Program PROMETEO (Generalitat Valenciana. Conselleria de Educacion, 2008-157). We would like to express our gratitude to the Hospital Clinica Benidorm, for providing the MR datasets and to the radiologist team of Inscanner for the manual segmentation of the MR images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Estrategia para el control háptico, basado en electromiografía, de un exoesqueleto de mano para neurorehabilitación

  • Cisnal, Ana
  • Moreno, Victor
  • Pérez Turiel, Javier
  • Alonso, Rubén
  • Fraile Marinero, J. Carlos
  • Lobo, Victor
[ES] RobHand es un sistema de neuro-rehabilitación para la mano de sujetos que han sufrido un ACV y deben recuperar la movilidad perdida como consecuencia del mismo. El sistema incluye un exoesqueleto de mano, un interfaz con el paciente para la realización de terapias basadas en un entorno virtual y un sistema de gestión de toda la información asociada a los pacientes y las terapias. Es un desarrollo financiado por el CDTI y se lleva a cabo en colaboración por la empresa CyL ImasD (Salamanca), el grupo de Robótica Médica del ITAP (UVa) y el servicio de rehabilitación del Hospital Clínico Universitario (HCU) de Valladolid. Soporta tanto terapias de tipo pasivo, en las cuales el sujeto no ejerce ninguna fuerza y toda la responsabilidad es del sistema, como otras de tipo activo asistido en las que se busca conseguir un comportamiento de tipo asistencia a medida (assist as needed) en el que el sistema detecta la fuerza realizada por el paciente y la complementa hasta el nivel de desempeño deseado. El trabajo presenta el planteamiento y el estado de desarrollo de la arquitectura de control del sistema. Está adopta un esquema jerárquico en tres niveles de los que el nivel intermedio L2 implementa una estrategia de interacción háptica con control de admitancia. Para ello planteamos utilizar registros de EMGs del paciente y el consumo de corriente de los motores para adaptar dinámicamente el nivel de asistencia a la situación del paciente. Se ha desarrollado un hardware específico para el registro y tratamiento de las señales de EMG y los algoritmos de control se ejecutan en un DSP para favorecer la autonomía del dispositivo. En la actualidad se están realizando pruebas de las terapias pasivas con 5 pacientes en el HCU y en breve comenzarán las pruebas con terapias activas., [EN] RobHand is a neuro rehabilitation system for the hand and wrist of subjects who have suffered a stroke and must recover the mobility lost. It includes a hand exoskeleton, an interface with the patient for performing therapies based on a virtual environment and a management system for the information associated with patients and therapies. In this paper we present the approach and the development status of the control architecture of the hand exoskeleton integrated in the rehabilitation system. Their kinematic and dynamic models, and the sEMG based bio-operative controller that implements active-assisted therapies tailored to the patient are described., El trabajo reflejado en está comunicación está siendo realizado gracias a la financiación del Centro para el Desarrollo Tecnológico Industrial (CDTI, referencia IDI 2017 0263) y de la empresa CyL ImasD.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Genetic parameters and direct, maternal and heterosis effects on litter size in a diallel cross among three commercial varieties of Iberian pig

  • Noguera, J.L.
  • Casellas, J.
  • Rosas, J.P.
  • Varona, L.
  • Ibáñez-Escriche, Noelia|||0000-0002-6221-3576
[EN] The Iberian pig is one of the pig breeds that has the highest meat quality. Traditionally, producers have bred one of the available varieties, exclusively, and have not used crosses between them, which has contrasted sharply with other populations of commercial pigs for which crossbreeding has been a standard procedure. The objective of this study was to perform an experiment under full diallel design among three contemporary commercial varieties of Iberian pig and estimate the additive genetic variation and the crossbreeding effects (direct, maternal and heterosis) for prolificacy. The data set comprised 18 193 records for total number born and number born alive from 3800 sows of three varieties of the Iberian breed (Retinto, Torbiscal and Entrepelado) and their reciprocal crosses (Retinto × Torbiscal, Torbiscal × Retinto, Retinto × Entrepelado, Entrepelado × Retinto, Torbiscal × Entrepelado and Entrepelado × Torbiscal), and a pedigree of 4609 individuals. The analysis was based on a multiple population repeatability model, and we developed a model comparison test that indicated the presence of direct line, maternal and heterosis effects. The results indicated the superiorities of the direct line effect of the Retinto and the maternal effect of the Entrepelado populations. All of the potential crosses produced significant heterosis, and additive genetic variation was higher in the Entrepelado than it was in the other two populations. The recommended cross for the highest yield in prolificacy is a Retinto father and an Entrepelado mother to generate a hybrid commercial sow., The work was partially funded by the Center for Industrial Technological Development (CDTI) via grant IDI-20170304 and by grant CGL-2016-80155 from the Ministry of Economy, Industry and Competitiveness (MINECO), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Preliminary Study on Vitamin-Enhanced Extra-Virgin Olive Oil: Functional Food Design via Advanced Emulsion Systems

  • Montoro-Alonso, Sandra
  • Duque-Soto, Carmen
  • Reina-Manuel, José
  • Rueda-Robles, Ascensión
  • Lozano-Sanchez, Jesus
  • Martínez-Martí, Joana|||0000-0002-7070-6573
[EN] Micronutrient deficiencies, particularly of vitamins A, D3, and folic acid, remain a significant global health challenge despite established dietary recommendations. This study proposes a novel fortification strategy using advanced emulsion technology to enrich extra-virgin olive oil (EVOO) with these essential micronutrients. Water-in-oil (W/O) and double oil-in-water-in-oil (O/W/O) emulsions were designed to enable the simultaneous encapsulation of lipophilic (A and D3) and hydrophilic (folic acid) vitamins within a single functional food matrix. Vitamin concentrations were quantified using high-performance liquid chromatography (HPLC) coupled with a photodiode detector (PDA) to evaluate retention during processing. Bioaccessibility was assessed by subjecting vitamin-enriched emulsions to a standardized in vitro digestion model simulating gastrointestinal conditions. Results showed significantly higher incorporation efficiency in the O/W/O system compared to conventional W/O emulsions, regardless of the physicochemical properties of the vitamins. Both lipophilic (A and D3) and hydrophilic (folic acid) compounds exhibited a satisfactory retention, highlighting the versatility of the double-emulsion approach. This study represents the first report of simple and multiple oil-continuous emulsions that simultaneously incorporate vitamins A, D3, and folic acid, providing preliminary evidence of their stability and gastrointestinal release under simulated digestion conditions., This research was funded by 23/1128 (Technological Corporation of Andalusia), and IDI-20230961 (CDTI, MICIN). S.M.-A. is grateful to the Results Transfer Office (OTRI), University of Granada, for her predoctoral grant P37/21/04. A.R.-R. is grateful to the MCIN for a postdoctoral researcher contract (PTQ2021-012110). C.D.-S. is grateful to the Regional Government of Andalucía for a predoctoral grant (PREDOC_00110).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Can immersive technologies sustain green brand image? An empirical investigation on the role of virtual nature experiences

  • Di Dalmazi, Michele
  • Mandolfo, Marco
  • Lamberti, Lucio
  • Guixeres Provinciale, Jaime
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
[EN] In response to the global environmental challenges, consumers have become increasingly focused on sustainability, prompting companies to adopt eco-friendly practices. Despite these efforts, effectively communicating their environmental commitment through green advertising is not straightforward. This study explores how immersive technologies can enhance the green brand image by leveraging emotional communication of green benefits. An experiment was conducted to compare the impact of advertisements using natural imagery delivered through virtual reality (VR) technology versus traditional media (a website). The results suggest that VR can create more intense virtual natural experiences due to the mediation of presence. Additionally, virtual natural experiences facilitate mental associations between the brand image and sustainability. The study also demonstrates that this type of emotional communication is more effective for consumer segments less involved in environmental issues. The research offers practical implications for brands and advertisers., This research received funding to develop the virtual space from the project VIEWSHOP: FREE-TOUCH RETAIL/COVID, Agency CDTI (Centro Desarrollo Tecnologico Industrial)-grant Number IDI-2021048.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Introducing 3DCNN ResNets for ASD full-body kinematic assessment: A comparison with hand-crafted features

  • Altozano-Fernández, Alberto|||0009-0006-3470-5836
  • Minissi, Maria Eleonora|||0000-0001-6326-0609
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Marín-Morales, Javier|||0000-0003-1271-2892
[EN] Autism Spectrum Disorder (ASD) is characterized by challenges in social communication and restricted patterns, with motor abnormalities gaining traction for early detection. However, kinematic analysis in ASD is limited, often lacking robust validation and relying on hand-crafted features for single tasks, leading to inconsistencies across studies. End-to-end models have emerged as promising methods to overcome the need for feature engineering. Our aim is to propose a newly adapted 3DCNN ResNet from action recognition and compare it to widely used hand-crafted features for motor ASD assessment. Specifically, we developed a virtual reality environment with multiple motor tasks and trained models using both approaches. We prioritized a reliable validation framework with subject-wise nestedrepeated cross-validation. Results show the proposed model achieves a maximum accuracy of 85 +/- 3%, outperforming state-of-the-art end-to-end models with short 1-to-3 min samples. Our comparative analysis with hand-crafted features shows feature-engineered models outperformed our end-to-end model in certain tasks. However, generalized linear mixed-effects models showed that our end-to-end model achieved a statistically higher mean AUC (0.80 +/- 0.03) and Sensitivity (66 +/- 3%), while showing less variability across all VR tasks, demonstrating domain generalization and reliability. These findings show that end-to-end models enable less variable and context-independent ASD classification without requiring domain knowledge or task specificity. However, they also recognize the effectiveness of hand-crafted features in specific task scenarios., This publication is part of the R&D&I project with reference (IDI-20201146) , funded by The CDTI of the Spanish MCIU; part of the R&D&I project with reference PID2020-116422RB-C21, funded by MI-CIU/AEI/10.13039/501100011033; and by the Generalitat Valenciana (CIGE/2023/160) . MEM received partial Funding by the Generalitat Valenciana (GRISOLIAP/2019/137) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fronto-caudate and callosal microstructural alterations: unveiling multimodal MRI biomarkers in early Parkinson&apos, s disease

  • Bernabeu-Sanz, Angela
  • Fernandez, Eduardo
  • Morales, Sandra|||0000-0003-0763-1545
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
[EN] Objectives This study investigated grey and white matter alterations and their association with motor and cognitive symptoms in early-stage Parkinson's disease (PD).Methods Thirty-one early-stage PD patients and 30 matched healthy controls underwent multimodal MRI (VBM, DTI) and comprehensive clinical/neuropsychological assessments. We assessed grey matter atrophy, white matter microstructure, and caudate-cortical connectivity.Results Parkinson's disease (PD) patients showed selective deficits in memory (FCSRT total recall, P-FDR = .014) and processing speed (SDMT, P-FDR = .025). Voxel-based morphometry (VBM) revealed bilateral caudate atrophy (left, P-FDR = .024; right, P-FDR = .026). Diffusion tensor imaging (DTI) demonstrated widespread microstructural alterations in corpus callosum and major association tracts. Disease duration negatively correlated with corpus callosum streamline counts (superior parietal P-FDR = .02; posterior parietal P-FDR = .004). UPDRS negatively correlated with fractional anisotropy (FA) in occipital (P-FDR = .002) and temporal (P-FDR = .0017) corpus callosum segments. Reduced caudate-cortical streamline density in frontal regions correlated with UPDRS/FCSRT scores; caudate-cingulum streamlines correlated with Mini-Mental State Examination (MMSE) attention/calculation.Conclusions Our findings suggest early functionally relevant degeneration of fronto-caudate and interhemispheric pathways in PD. These structural changes correlate with specific cognitive and motor impairments, and are candidate imaging biomarkers for early PD progression and/or cognitive vulnerability.Advances in Knowledge This is the first tractography study to evaluate connectivity between the caudate nuclei and different frontal lobe regions, unveiling specific white matter alterations in early PD. Our findings suggest that caudate atrophy, though not directly correlated with clinical variables, may underlie or result from impaired caudate-cortical connectivity, potentially accounting for some of the multifaceted PD symptoms., This study was funded by the Centro para el Desarrollo Tecnologico Industrial (CDTI) through the BRAIM project (IDI-20130020) and was partially supported by grants PDC2022-133952-I00 and PID2022-141606OB-I00 from the Spanish Ministerio de Ciencia, Innovacion y Universidades, as well as by grant CIPROM/2023/25 from the Generalitat Valenciana. Funding for open access charge was provided by CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modifying growth curve parameters by multitrait genomic selection

  • Ibáñez-Escriche, Noelia|||0000-0002-6221-3576
  • Blasco Mateu, Agustín|||0000-0003-3558-0810
[EN] The use of genomic selection for changing the growth curve shape of animals, acting simultaneously on the 3 parameters of a Gompertz growth curve, was studied using computer simulation. Results showed that genomic selection modified the growth curve. Responses to all selection criteria were accompanied with a correlated response in mature weight due to the high genetic correlations between mature weight and the 2 rate parameters. Responses to selection were affected by the loss of accuracy over generations of genomic selection due to the loss of gametic disequilibrium between SNP and genes determining the parameters. In conclusion, genomic selection can be used for changing growth curve parameters. However, changing the whole curve ( birth weight, adult BW, and curve shape) is not easy due to the correlation between all BW along the growth of the animal. Applying genomic selection will require a constant reevaluation of the associations between SNP and genes determining the curve parameters., We thank to Rohan Fernando (Department of Animal Science, Iowa State University, Ames) for the use of his Matvec library. This work is supported by Projects IDI-20080692 and AGL2008-05514-C02-01 of the Spanish National Research Plan.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Results of a combined monolithic crystal and an array of ASICs controlled SiPMs

  • Conde Castellanos, Pablo Eloy
  • González Martínez, Antonio Javier
  • Hernández Hernández, Liczandro
  • Bellido, P.
  • Iborra Carreres, Amadeo
  • Crespo Navarro, Efren
  • Moliner Martínez, Laura
  • Rigla, JP.
  • Sánchez, F.
  • Seimetz, Michael
  • Soriano Asensi, Antonio
  • Vidal San Sebastián, Luis Fernando
  • Rodríguez-Álvarez, M.J.|||0000-0001-8333-8792
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
[EN] In this work we present the energy and spatial resolutions we have obtained for a γ ray detector based on a monolithic LYSO crystal coupled to an array of 256 SiPMs. Two crystal configurations of the same trapezoidal shape have been tried. In one approach all surfaces were black painted but the exit one facing the photosensor array which was polished. The other approach included a retroreflector (RR) layer coupled to the entrance face of the crystal powering the amount of transmitted light to the photosensors. Two coupling media between the scintillator and the SiPM array were used, namely direct coupling by means of optical grease and coupling through an array of light guides. Since the same operational voltage was supplied to the entire array, it was needed to equalize their gains before feeding their signals to the Data Acquisition system. Such a job was performed by means of 4 scalable Application Specific Circuits (ASICs). An energy resolution of about 24.4% has been achieved for the direct coupling with the RR layer together with a spatial resolution of approximately 2.9 mm at the detector center. With the light guides coupling the effects of image compression at the edges are significantly minimized, but worsening the energy resolution to about 33.1% with a spatial resolution nearing 4 mm at the detector center. & 2013 Elsevier B.V. All rights reserved., cknowledgments This work was supported by the Centre for Industrial Technological Development co-funded by FEDER through the Technology Fund (DREAM Project, IDI-20110718), the Spanish Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica (IþDþI) under Grant no. FIS2010-21216-CO2-01 and the Valencian Local Government under Grant PROMETEO 2008/114
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact accelerations during a prolonged run using a microwavable self-customised foot orthosis

  • JIménez-Pérez, Irene
  • Priego-Quesada, Jose Ignacio
  • Cibrian Ortiz De Anda, Rosa María
  • Pérez-Soriano, Pedro
  • Camacho-García, Andrés|||0000-0001-8542-4264
[EN] The use of custom-made foot orthoses has been associated with numerous benefits, such as decreased impact accelerations. However, it is not known whether this effect could be due to better customisation. The present study analysed the effects of the first generation of a microwavable prefabricated self-customised foot orthosis vs. a prefabricated standard one on impact accelerations throughout a prolonged run. Thirty runners performed two tests of 30-min running on a treadmill, each one with an orthosis condition. Impact acceleration variables of tibia and head were recorded every 5 min. Microwavable self-customised foot orthosis increased the following variables in the first instants compared to the prefabricated standard one: tibial peak (min1: 6.5 (1.8) vs. 6.0 (1.7) g, P = .009, min5: 6.6 (1.7) vs. 6.2 (1.7) g, P = .035), tibial magnitude (min1: 8.3 (2.6) vs. 7.7 (2.4) g, P = .030, min5: 8.5 (2.6) vs. 7.9 (2.5) g, P = .026) and shock attenuation (min1: 61.4 (16.8) vs. 56.3 (16.3)%, P = .014, min5: 62.0 (15.5) vs. 57.2 (15.3)%, P = .040), and tibial rate throughout the entire run (504.3 (229.7) vs. 422.7 (212.9) g/s, P = .006). However, it was more stable throughout 30-min running (P < .05). These results show that the shape customisation entailed by the thermoformable material does not provide impact acceleration improvements., This work was supported by the Centre for Industrial Technological Development (CDTI) [Project SPORT@FUTURE (IDI 20141290-IDI 20141296)], and the work of IJP was supported by the Ministry of Science, Innovation and Universities of the Spanish Government [grant number FPU 14/05626].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Micronutrient Fertiliser Reinforcement by Fulvate Lignosulfonate Coating Improves Physiological Responses in Tomato

  • Gil Ortiz, Ricardo
  • Atares, Sergio
  • Morillon, Raphaël
  • Naranjo Olivero, Miguel Angel
  • Vicente, Oscar|||0000-0001-5076-3784
[EN] Micronutrients are essential to plants, and enhancing their availability is one of the agronomic challenges to improving crop quality and yield. This study, under controlled greenhouse conditions, compares tomato plants¿ responses to two different micronutrient EDTA-chelated formulations, one of them including a newly developed fulvate¿lignosulfonate coating. Growth, yield, and several physiological parameters, including photosynthetic gas exchange, water-use efficiency, leaf nutrient content, leaf greenness and the effective quantum yield of photosystem II, were measured to compare their efficiency. The results showed that the new coated formulation significantly improved growth and most of the determined physiological parameters. At the end of the experiment, higher foliar levels of Fe (2.4-fold) and Mn (2.9-fold) were measured, revealing increased availability of lignofulfonate-complexed micronutrients compared to the traditional fertiliser. Moreover, the photosynthesis rate and stomatal conductance were 9- and 20-fold higher, respectively, than when using the standard fertiliser. In conclusion, the new coated fulvate¿lignosulfonated fertiliser provided a more suitable source of micronutrients for tomato plant fertilisation, allowing for higher yields, which correlated with a generally improved physiological response., This work was supported by the Centre for Development of Industrial Technology (CDTI), Spanish Government (grant number IDI-20131255). The APC was funded by R.G.-O.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The Gypsy Database (GyDB) of mobile genetic elements: release 2.0

  • Llorens, Carlos
  • Futami, Ricardo
  • Covelli, Laura
  • Domínguez-Escriba, Laura
  • Viu, Jose M.
  • Tamarit, Daniel
  • Aguilar-Rodríguez, Jose
  • Vicente Ripollés, Miguel
  • Fuster, Gonzalo
  • Bernet, Guillermo P
  • Maumus, Florian
  • Munoz-Pomer, Alfonso
  • Latorre, Amparo
  • Moya, Andres
  • Sempere Luna, José María|||0000-0003-2393-9224
This article introduces the second release of the Gypsy Database of Mobile Genetic Elements (GyDB 2.0): a research project devoted to the evolutionary dynamics of viruses and transposable elements based on their phylogenetic classification (per lineage and protein domain). The Gypsy Database (GyDB) is a long-term project that is continuously progressing, and that owing to the high molecular diversity of mobile elements requires to be completed in several stages. GyDB 2.0 has been powered with a wiki to allow other researchers participate in the project. The current database stage and scope are long terminal repeats (LTR) retroelements and relatives. GyDB 2.0 is an update based on the analysis of Ty3/Gypsy, Retroviridae, Ty1/Copia and Bel/Pao LTR retroelements and the Caulimoviridae pararetroviruses of plants. Among other features, in terms of the aforementioned topics, this update adds: (i) a variety of descriptions and reviews distributed in multiple web pages; (ii) protein-based phylogenies, where phylogenetic levels are assigned to distinct classified elements; (iii) a collection of multiple alignments, lineage-specific hidden Markov models and consensus sequences, called GyDB collection; (iv) updated RefSeq databases and BLAST and HMM servers to facilitate sequence characterization of new LTR retroelement and caulimovirus queries; and (v) a bibliographic server. GyDB 2.0 is available at http://gydb.org. © The Author(s) 2010. Published by Oxford University Press., Centro de Desarrollo Tecnologico Industrial (CDTI) (grant IDI-20100007, partial); Empresa Nacional de Innovacion, S.A (ENISA) (17092008, partial); IMPIVA (IMIDTA/2009/118 and IMDTA/2010/740, partial); European Regional Development Fund (ERDF); Ministerio de Ciencia e Innovacion (MICINN) (Torres-Quevedo grants PTQ-09-01-00020, PTQ-09-01-00670 and PTQ-10-03552, partial). Funding for open access charge: University of Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Segmentation of the breast skin and its influence in the simulation of the breast compresion during an X-Ray mammography

  • Solves Llorens, Juan Antonio
  • Rupérez Moreno, María José|||0000-0001-8457-7963
  • C. Monserrat|||0000-0003-1790-8085
  • Feliu, E.
  • García, M.
  • Lloret, M.
A novel method of skin segmentation is presented aimed to obtain as many pixels belonging to the real skin as possible. This method is validated by experts in radiology. In addition, a biomechanical model of the breast, which considers the skin segmented in this way, is constructed to study the influence of considering real skin in the simulation of the breast compression during an X-ray mammography. The reaction forces of the plates are obtained and compared with the reaction forces obtained using classical methods that model the skin as a 2D membranes that cover all the breast. The results of this work show that, in most of the cases, the method of skin segmentation is accurate and that real skin should be considered in the simulation of the breast compression during the X-ray mammographies. Copyright © 2012 J. A. Solves Llorens et al., This project has been partially funded by the Regional Valencian Government through IMPIVA with FEDER funding (reference IMIDTF/2010/111), by CDTI (reference IDI-20101153), and by MICINN (reference TIN2010-20999-C04-01). The authors would like to express their gratitude to the personnel from the Hospitals HCB and La Fe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

BRAIM: A computer-aided diagnosis system for neurodegenerative diseases and brain lesion monitoring from volumetric analyses

  • Morales, Sandra|||0000-0003-0763-1545
  • López-Mir, Fernando|||0000-0001-8286-6796
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
  • Bernabeu-Sanz, Angela
  • Gonzalez, Pablo
  • Luna, Luis
[EN] Background and objective: This paper presents BRAIM, a computer-aided diagnosis (CAD) system to help clinicians in diagnosing and treatment monitoring of brain diseases from magnetic resonance image processing. BRAIM can be used for early diagnosis of neurodegenerative diseases such as Parkinson, Alzheimer or Multiple Sclerosis and also for brain lesion diagnosis and monitoring. Methods: The developed CAD system includes different user-friendly tools for segmenting and determining whole brain and brain structure volumes in an easy and accurate way. Specifically, three types of measurements can be performed: (1) total volume of white, gray matter and cerebrospinal fluid; (2) brain structure volumes (volume of putamen, thalamus, hippocampus and caudate nucleus); and (3) brain lesion volumes. Results: As a proof of concept, some study cases were analyzed with the presented system achieving promising results. In addition to be used to quantify treatment effectiveness in patients with brain lesions, it was demonstrated that BRAIM is able to classify a subject according to the brain volume measurements using as reference a healthy control database created for this purpose. Conclusions: The CAD system presented in this paper simplifies the daily work of clinicians and provides them with objective and quantitative volume data for prospective and retrospective analyses. (C) 2017 Elsevier B.V. All rights reserved., This work has been supported by the Centro para el Desarrollo Tecnologico Industrial (CDTI) under the project BRAIM (IDI-20130020)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Acoustic and Life Cycle Assessment of Textile Sound-Absorbing Elements in Party Tents

  • Mendiguchia-Fontes, Fernando Aitor
  • Quintana-Gallardo, Alberto|||0000-0002-8911-595X
  • Saez-Giunta, Vanesa Celina|||0000-0001-8437-4285
  • Secondo Maglia, Juan Gabriel|||0009-0005-0904-4311
  • Bono-Cremades, Javier Alfonso|||0000-0002-3208-5032
  • Guillén Guillamón, Ignacio Enrique|||0000-0001-5546-1486
[EN] In the context of temporary urban environments such as festivals and construction sites, acoustic discomfort inside textile-based party tents remains a critical yet under-addressed issue. This study, developed in collaboration with industrial partners from the construction and textile sectors, aimed to design and assess lightweight, flexible sound-absorbing solutions capable of improving acoustic comfort while reducing environmental impact. A set of nine composite textile samples were fabricated using combinations of recycled and technical materials. Their acoustic behavior was characterized through standardized laboratory tests (ISO 10140-2 and ISO 354:2004) and full-scale prototypes under simulated real-world conditions. Simultaneously, a Life Cycle Assessment (LCA) was conducted according to ISO 14040:2006 and EN 15804:2020 standards to quantify environmental impacts from cradle to gate. The results demonstrate that it is possible to achieve an effective balance between acoustic performance and environmental sustainability. Integrating both types of assessment into the material selection process enables more informed, responsible design decisions for temporary textile structures, aligning construction practices with growing demands for functional and sustainable solutions., This research was funded by the Centre for the Development of Industrial Technology (CDTI) and the European Regional Development Fund (ERDF) through the Multi-regional Operational Program for Smart Growth, grant number IDI-20150814.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Parameter optimization of the liver tissue mechanical properties by means of FE modeling of the respiratory liver motion and similarity coefficients

  • Martínez Martínez, Francisco
  • Martín-Guerrero, J.
  • Pareja, E.
  • López-Andújar, R.
  • Brugger, S.
  • Rupérez Moreno, María José|||0000-0001-8457-7963
  • C. Monserrat|||0000-0003-1790-8085
This work has been partially supported by CDTI (ref. IDI-20101153) and by MICINN (ref. TIN2010-20999-C04-01) and by GVA (ref. ACOMP/2012/181). The work of Francisco Martı´nez-Martı´nez has been supported by the Spanish Government under the FPI Grant BES2011-046495. We would also like to express our deep gratitude to the Hospital Clı´nica Benidorm for its participation in this project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Genetic parameters and crossbreeding effects on fat depositiom and fatty acid profiles in Iberian pig lines

  • Ibáñez-Escriche, Noelia|||0000-0002-6221-3576
  • Magallón, E.
  • Gonzalez, E.
  • Tejeda, J.F.
  • Noguera, J.L.
[EN] The aim of this study was to estimate the genetic and environmental parameters and crossbreeding effects on fatty acid and fat traits in the Iberian pig. Our final goal is to explore target selection traits and define crossbreeding strategies. The phenotypes were obtained under intensive management from 470 animals in a diallelic experiment involving Retinto, Torbiscal, and Entrepelado lines. The data set was composed of backfat thickness at the fourth rib (BFT), intramuscular fat (IMF) in the longissimus thoracis (LT), and the fatty acid profile for IMF and subcutaneous fat (SCF) traits. Data were analyzed through a Bayesian bivariate animal model by using a reparameterization of Dickerson's model. The results obtained showed an important genetic determinism for all traits analyzed with heritability ranging from 0.09 to 0.67. The common environment litter effect also had an important effect on IMF (0.34) and its fatty acid composition (0.06-0.53) at slaughter. The additive genetic correlation between BFT and IMF (additive genetic correlation [r(g)] = 0.31) suggested that it would be possible to improve lean growth independent of the IMF with an appropriate selection index. Furthermore, the high additive genetic correlation (rg = 0.68) found between MUFA tissues would seem to indicate that either the LT or SCF could be used as the reference tissue for MUFA selection. The relevance of the crossbreeding parameters varied according to the traits analyzed. Backfat thickness at the fourth rib and the fatty acid profile of the IMF showed relevant differences between crosses, mostly due to line additive genetic effects associated with the Retinto line. On the contrary, those for IMF crosses were probably mainly attributable to heterosis effects. Particularly, heterosis effects were relevant for the Retinto and Entrepelado crosses (approximately 16% of the trait), which could be valuable for a crossbreeding system involving these lines., The authors gratefully acknowledge the company INGA FOOD and its technicians (M.J. García-Santana, Lourdes Muñoz, Pilar Diaz, and Manuel Ramos) for their cooperation with the experimental protocol and their technical support. The work was partially funded by the Center for Industrial Technological Development (CDTI) via grant IDI-20100447 and by grant ref. RTA2012-00054-C02-01 from the Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria (INIA), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design and Validation of an Augmented Reality System for Laparoscopic Surgery in a Real Environment

  • López-Mir, Fernando|||0000-0001-8286-6796
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Fuertes Cebrián, Juan José
  • Bueno, J.
  • Pareja, E.
Purpose. This work presents the protocol carried out in the development and validation of an augmented reality system which was installed in an operating theatre to help surgeons with trocar placement during laparoscopic surgery. The purpose of this validation is to demonstrate the improvements that this system can provide to the field of medicine, particularly surgery. Method. Two experiments that were noninvasive for both the patient and the surgeon were designed. In one of these experiments the augmented reality system was used, the other one was the control experiment, and the system was not used. The type of operation selected for all cases was a cholecystectomy due to the low degree of complexity and complications before, during, and after the surgery. The technique used in the placement of trocars was the French technique, but the results can be extrapolated to any other technique and operation. Results and Conclusion. Four clinicians and ninety-six measurements obtained of twenty-four patients (randomly assigned in each experiment) were involved in these experiments.The final results show an improvement in accuracy and variability of 33% and 63%, respectively, in comparison to traditional methods, demonstrating that the use of an augmented reality system offers advantages for trocar placement in laparoscopic surgery., This work has been supported by Centro para el Desarrollo Tecnologico Industrial (CDTI) under the project Oncotic (IDI-20101153) and the Hospital Clinica Benidorm(HCB) and partially supported by the Ministry of Education and Science of Spain (TIN2010-20999-C04-01), the project Consolider-C (SEJ2006-14301/PSIC) and the "CIBER of Physiopathology of Obesity Nutrition, an initiative of ISCIII" Prometheus and Excellence Research Program (Generalitat Valenciana, Department of Education, 2008-157). The authors would like to express their gratitude to the Hospital Clinica Benidorm and to the Hospital Univeritari i Politecnic la Fe (especially the surgical team) for their participation and involvement in this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Hormigón ligero estructural con áridos reciclados

  • Benito Saorín, Francisco
  • Miñano Belmonte, Isabel
  • Parra Costa, Carlos
  • Alcaraz Marín, Jesús
  • Hidalgo Torrano, Pilar
[ES] La investigación propone la reutilización de residuos industriales (plástico y corcho) nanomoléculas de sílice y adiciones activas (cenizas volantes), para la fabricación de hormigones estructurales ligeros, cumpliendo con los estándares de resistencia y durabilidad requeridos en la normativa española asociada a este tipo de productos. La consecución de todas las fases de esta investigación ha pretendido profundizar en el conocimiento y puesta en práctica en laboratorio e implantación industrial de hormigones de altas resistencias y ligero para uso estructural con subproductos industriales. La menor densidad de los hormigones diseñados (ECOHUL) y su alta durabilidad lo hacen idóneos para su utilización en zonas sísmicas. La utilización de áridos ligeros reciclados varía sustancialmente la densidad de los hormigones y sus resistencias a compresión (de forma prácticamente lineal). Sin embargo, y de forma muy positiva, se ha constatado que las dosificaciones adoptadas, con y sin residuos, se han comportado de forma similar en los ensayos de durabilidad: cloruros, carbonatación y absorción capilar., Proyecto CDTI-IDI-20130144 de la empresa Cementos La Cruz S.L. con la colaboración del Grupo de Investigación de Ciencia y Tecnología Avanzada de la Construcción de la Universidad Politécnica de Cartagena. Nuestro agradecimiento a la empresa BASF y HORMICRUZ S.L. por su ayuda e interés.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Assessing the Influence of Stereotypes on the Comprehension of UML Sequence Diagrams: A Family of Experiments

  • Cruz-Lemus, José A.
  • Genero Bocco, Marcela
  • Caivano, Danilo
  • Abrahao Gonzales, Silvia Mara|||0000-0003-3580-2014
  • Insfran, Emilio|||0000-0003-0855-5564
  • Carsí Cubel, José Ángel|||0000-0002-0277-8188
[EN] Context: The conventional wisdom states that stereotypes are used to clarify or extend the meaning of model elements and consequently should be helpful in comprehending the diagram semantics. Objective: The main goal of this work is to present a family of experiments that we have carried out to investigate whether the use of stereotypes improves the comprehension of UML sequence diagrams. Method: The family of experiments consists of an experiment and two replications carried out with 78, 29 and 36 undergraduate Computer Science students, respectively. The comprehension of UML sequence diagrams with and without stereotypes was analyzed from three different perspectives borrowed from the Cognitive Theory of Multimedia Learning (CTML): semantic comprehension, retention and transfer. In addition, we carried out a meta-analysis study to integrate the different data samples. Results: The statistical analysis and meta-analysis of the data obtained from each experiment separately indicates that the use of the proposed stereotypes helps improving the comprehension of the diagrams, especially when the subjects are not familiar with the domain. Conclusions: The set of stereotypes presented in this work seem to be helpful for a better comprehension of UML sequence diagrams, especially with not well-known domains. Although further research is necessary for strengthening these results, introducing these stereotypes both in academia and industry could be an interesting practice for checking the validity of the results, This research is part of the following projects: "MEDUSAS (IDI-20090557)" and "Proyecto Integrado ORIGIN (IDI-2010043(1-5))" financed by CDTI and FEDER; "ECCOO (TRA2009_0074)", "MAGO/PEGASO (TIN2009-13718)" and "MULTIPLE (TIN2009-13838)" financed by MICINN; MECCA (PI12109-0075-8394) and IMPACTUM (PEII11-0330-4414) financed by JCCM and CALIMO funded by the Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Proxy-based near real-time TV content transmission in mobility over 4G with MPEG-DASH transcoding on the cloud

  • Arce Vila, Pau|||0000-0001-5726-9228
  • Belda Ortega, Román|||0000-0003-2244-2371
  • Guerri Cebollada, Juan Carlos|||0000-0002-5807-1923
  • De Fez Lava, Ismael
  • Ferrairó, Salvador
[EN] This paper presents and evaluates a system that provides TV and radio services in mobility using 4G communications. The system has mainly two blocks, one on the cloud and another on the mobile vehicle. On the cloud, a DVB (Digital Video Broadcasting) receiver obtains the TV/radio signal and prepares the contents to be sent through 4G. Specifically, contents are transcoded and packetized using the DASH (Dynamic Adaptive Streaming over HTTP) standard. Vehicles in mobility use their 4G connectivity to receive the flows transmitted by the cloud. The key element of the system is an on-board proxy that manages the received flows and offers them to the final users in the vehicle. The proxy contains a buffer that helps reduce the number of interruptions caused by hand over effects and lack of coverage. The paper presents a comparison between a live transmission using 4G connecting the clients directly with the cloud server and a near real-time transmission based on an on-board proxy. Results prove that the use of the proxy reduces the number of interruptions considerably and, thus, improves the Quality of Experience of users at the expense of slightly increasing the delay., This work is supported by the Centro para el Desarrollo Tecnologico Industrial (CDTI) from the Government of Spain under the project "Plataforma avanzada de conectividad en movilidad" (CDTI IDI-20150126) and the project "Desarrollo de nueva plataforma de entretenimiento multimedia para entornos nauticos" (CDTI TIC-20170102).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Novel and conventional embryo parameters as input data for artificial neural networks: an artificial intelligence model applied for prediction of the implantation potential

  • Bori, Lorena
  • Paya-Bosch, Elena
  • Alegre, Lucía
  • Viloria, Thamara
  • Remohí, José
  • Meseguer, Marcos
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
[ES] Objetivo: Describir nuevas características de embriones capaces de predecir el potencial de implantación como datos de entrada para un modelo de red neuronal artificial (ANN). Diseño: Estudio de cohorte retrospectivo. Entorno: Centro de FIV privado afiliado a la universidad. Paciente (s): Este estudio incluyó a 637 pacientes del programa de donación de ovocitos que se sometieron a transferencia de un solo blastocisto durante dos años consecutivos. Intervención (es): Ninguna. Principales medidas de resultado: La investigación se dividió en dos fases. La fase 1 consistió en la descripción y análisis de las siguientes características embrionarias en embriones implantados y no implantados: distancia y velocidad de migración pronuclear, diámetro del blastocisto expandido, área de masa celular interna y duración del ciclo celular del trofoectodermo. La fase 2 consistió en el desarrollo de un algoritmo ANN para la predicción de la implantación. Se obtuvieron resultados para cuatro modelos alimentados con diferentes datos de entrada. El poder predictivo se midió con el uso del área bajo la curva característica operativa del receptor (AUC). Resultado (s): De los cinco nuevos parámetros descritos, el diámetro expandido del blastocisto y la duración del ciclo celular del trofoectodermo tenían valores estadísticamente diferentes en los embriones implantados y no implantados. Después de que los modelos ANN fueron entrenados y validados mediante validación cruzada cinco veces, estos fueron capaces de predecir la implantación en los datos de prueba con AUC de 0,64 para ANN1 (morfocinética convencional), 0,73 para ANN2 (morfodinámica novedosa), 0,77 para ANN3 (morfocinética convencional þ morfodinámica novedosa) y 0,68 para ANN4 (variables discriminatorias de prueba estadística). Conclusión (es): Las nuevas características embrionarias propuestas afectan al potencial de implantación y su combinación con parámetros morfocinéticos convencionales es eficaz como datos de entrada para un modelo predictivo basado en inteligencia artificial., [EN] Objective: To describe novel embryo features capable of predicting implantation potential as input data for an artificial neural network (ANN) model. Design: Retrospective cohort study. Setting: University-affiliated private IVF center. Patient(s): This study included 637 patients from the oocyte donation program who underwent single-blastocyst transfer during two consecutive years. Intervention(s): None. Main Outcome Measure(s): The research was divided into two phases. Phase 1 consisted of the description and analysis of the following embryo features in implanted and nonimplanted embryos: distance and speed of pronuclear migration, blastocyst expanded diameter, inner cell mass area, and trophectoderm cell cycle length. Phase 2 consisted of the development of an ANN algorithm for implantation prediction. Results were obtained for four models fed with different input data. The predictive power was measured with the use of the area under the receiver operating characteristic curve (AUC). Result(s): Out of the five novel described parameters, blastocyst expanded diameter and trophectoderm cell cycle length had statistically different values in implanted and nonimplanted embryos. After the ANN models were trained and validated using fivefold cross validation, they were capable of predicting implantation on testing data with AUCs of 0.64 for ANN1 (conventional morphokinetics), 0.73 for ANN2 (novel morphodynamics), 0.77 for ANN3 (conventional morphokinetics thorn novel morphodynamics), and 0.68 for ANN4 (discriminatory variables from statistical test). Conclusion(s): The novel proposed embryo features affect the implantation potential, and their combination with conventional morphokinetic parameters is effective as input data for a predictive model based on artificial intelligence. ((c) 2020 by American Society for Reproductive Medicine.), Supported by the Ministry of Science, Innovation, and Universities CDTI (IDI-20191102), an Industrial Ph.D. grant (DIN2018-009911), and Agencia Valenciana de Innovacio (INNCAD00-18-009) to E.P. and M.M.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Performance evaluation and testbed for delivering SRT live content using DASH Low Latency streaming systems

  • Belda Ortega, Román|||0000-0003-2244-2371
  • Arce Vila, Pau|||0000-0001-5726-9228
  • Guerri Cebollada, Juan Carlos|||0000-0002-5807-1923
  • De Fez, Ismael
[EN] The work presented in this paper focuses on the implementation of a testbed for the evaluation of content distribution systems using LL-DASH (Low Latency DASH -Dynamic Adaptive Streaming over HTTP-) and devices that provide real-time sources or servers using real-time protocols, such as RTSP (Real Time Streaming Protocol) or SRT (Secure Reliable Transport). These protocols are widely used by IP (Internet Protocol) cameras or by production and transmission systems, such as OBS Studio or vMix. The objective is to show the necessary processes in detail (so they can be reproduced in future works related to low latency services) and to minimize the end-to-end delay, obtaining values in the order of 2 seconds or less. The implementation has been done using FFmpeg software, players like Dash.js or Shaka-Player and implementing a Python web server with LL-DASH support to optimize the transmission delay., This work is supported by the Centro para el Desarrollo Tecnológico Industrial (CDTI) from the Government of Spain under the project Nueva plataforma a bordo basada en redes 5G y Wi-Fi 6 para medios de transporte terrestre (CDTI IDI20210624).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of a mixed reality-based intervention on arm, hand, and finger function on chronic stroke

  • Colomer Font, Carolina
  • Noé Sebastián, Enrique
  • Llorens Rodríguez, Roberto|||0000-0002-8677-8707
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
[EN] Background: Virtual and mixed reality systems have been suggested to promote motor recovery after stroke. Basing on the existing evidence on motor learning, we have developed a portable and low-cost mixed reality tabletop system that transforms a conventional table in a virtual environment for upper limb rehabilitation. The system allows intensive and customized training of a wide range of arm, hand, and finger movements and enables interaction with tangible objects, while providing audiovisual feedback of the participants' performance in gamified tasks. This study evaluates the clinical effectiveness and the acceptance of an experimental intervention with the system in chronic stroke survivors. Methods: Thirty individuals with stroke were included in a reversal (A-B-A) study. Phase A consisted of 30 sessions of conventional physical therapy. Phase B consisted of 30 training sessions with the experimental system. Both interventions involved flexion and extension of the elbow, wrist, and fingers, and grasping of different objects. Sessions were 45-min long and were administered three to five days a week. The body structures (Modified Ashworth Scale), functions (Motricity Index, Fugl-Meyer Assessment Scale), activities (Manual Function Test, Wolf Motor Function Test, Box and Blocks Test, Nine Hole Peg Test), and participation (Motor Activity Log) were assessed before and after each phase. Acceptance of the system was also assessed after phase B (System Usability Scale, Intrinsic Motivation Inventory). Results: Significant improvement was detected after the intervention with the system in the activity, both in arm function measured by the Wolf Motor Function Test (p < 0.01) and finger dexterity measured by the Box and Blocks Test (p < 0.01) and the Nine Hole Peg Test (p < 0.01); and participation (p < 0.01), which was maintained to the end of the study. The experimental system was reported as highly usable, enjoyable, and motivating. Conclusions: Our results support the clinical effectiveness of mixed reality interventions that satisfy the motor learning principles for upper limb rehabilitation in chronic stroke survivors. This characteristic, together with the low cost of the system, its portability, and its acceptance could promote the integration of these systems in the clinical practice as an alternative to more expensive systems, such as robotic instruments., The authors wish to thank the staff and patients of the Servicio de Neurorrehabilitación y Daño Cerebral de los Hospitales NISA for their involvement in the study. The authors also wish to thank the staff of LabHuman for their support in this project, especially Francisco Toledo and José Roda for their assistance. This study was funded in part by the Project TEREHA (IDI-20110844) and Project NeuroVR (TIN2013-44741-R) of the Ministerio de Economia y Competitividad of Spain, the Project Consolider-C (SEJ2006-14301/PSIC) of the Ministerio de Educacion y Ciencia of Spain, the "CIBER of Physiopathology of Obesity and Nutrition, an initiative of ISCIII", and the Excellence Research Program PROMETEO of the Conselleria de Educacion of Generalitat Valenciana (2008-157).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Crossbreeding effects on pig growth and carcass traits from two Iberian strains

  • Ibañez Escriche, Noelia
  • Varona, L.
  • Magallon, E.
  • Noguera, J.L.
[EN] An experiment of a 2 x 2 full diallelic cross between two contemporary Iberian pig strains (Retinto: RR, and Torbiscal: TT) was conducted to estimate the crossbreeding effects for growth and carcass traits. Phenotypic records were obtained under intensive management and consisted of two different data sets. The first set comprised growth traits until weaning and was collected at two different farms (6236 and 1208 records, respectively). Specific data included individual piglet weight at birth and at weaning at 28 days and average daily gain from birth to weaning at 28 days (ADG28) for both RR and TT and their reciprocal crosses. The second set comprised growth data from birth to slaughter (similar to 340 days and similar to 160 kg) and carcass traits from 349 individuals (randomly) sampled at weaning from the first dataset. Data were analyzed through a Bayesian analysis by using a reparameterization of Dickerson's model that allowed estimation of the posterior distributions of the following crossbreeding effects: average maternal breed effect (gM), average paternal breed effect (gP) and individual heterosis (hI). Results showed that the relative magnitude of crossbreeding effects depends on the trait analyzed. Crosses where Torbiscal strain was used as mother (RT and TT) achieved the greatest performance for all growth traits at weaning, leading to remarkable gM effects. The most outstanding example is the case of ADG28 where the probability of relevance was one. In contrast, TR cross showed the greatest differences from RR cross for all growth at slaughter and carcass traits. These differences were mainly due to hI and gP crossbreeding parameters. In particular, the posterior mean of hI was more noticeable for live weight at slaughter, average daily gain at slaughter and carcass length, while gP was more relevant for hams (kg) and loins (kg) representing from 3% to10% of average performance of traits. Hence, growth traits at weaning did not reveal any notable advantage of the crossbreeding scheme because of the superiority of the Torbiscal strain with respect to its mothering ability and the small hI. However, results from growth and carcass traits at slaughter would support the implementation of a TR crossbred system. It would allow exploitation of both the gP of the Torbiscal strain and the hI between these two Iberian pig strains. Additionally, gP estimates and phenotypic differences between reciprocal crosses might suggest signs of the presence of paternal genetic imprinting in primal cuts traits., The authors acknowledge the technicians of the IRTA (M.J. Garcia-Santana) and of the INGAFOOD Company (Manuel Ramos, Lourdes Munoz and Pilar Diaz) for cooperating in the experimental protocol and their technical support. The work was partially funded by the Center for Industrial Technological Development (CDTI) grant IDI-20100447 and by the grant RTA2012-00054-C02-01 from the Instituto Nacional de Investigacion y Tecnologia Agraria y Alimentaria (INIA), Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of repoductive seasonality in Entrepelado and Retinto Iberian pig varieties under intensive management

  • Martin de Hijas-Villalba, Melani
  • Varona, Luis
  • Pablo Rosas, Juan
  • Luis Noguera, Jose
  • Casellas, Joaquim
  • Ibáñez-Escriche, Noelia|||0000-0002-6221-3576
[EN] Seasonal patterns in the farrowing distribution of two Iberian pig varieties (Retinto and Entrepelado) and its environmental and genetic sources of variation were analyzed within the context of a von Mises circular mixed model solved through Bayesian inference. Estimates about the dispersion parameter supported a low seasonal pattern for both Entrepelado and Retinto varieties with the farrowing peak located between March and April. Nevertheless, seasonality was corroborated by the deviance information criterion when comparing against a uniform circular model by the deviance information criterion (DIC); the uniform model increased more than 100 DIC units in both Iberian pig varieties. Regarding systematic effects, only the parity number of the sow had a relevant impact on farrowing distribution, advancing the farrowing peak in gilts and old sows. Genetic variability was only suggested in the Retinto population although with a small estimate, which would indicate little chance to modify farrowing distribution by genetic selection in the Iberian pig., Research supported by projects CGL2016-80155-R and IDI20170304, and a fellowship granted to M. Martin de Hijas-Villalba (BES-2017-080596) by Spain's Ministerio de Economia y Competitividad.