Skip to main content

SIMULACIONES RAPIDAS DE LA ELECTROFISIOLOGIA DEL CORAZON BASADAS EN SEÑALES E IMAGENES PARA LA PLANIFICACION ASISTIDA POR ORDENADOR DE INTERVENCIONES CLINICAS

TIN2011-28067

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2011
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSITAT POMPEU FABRA CCT

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Estimation of Purkinje trees from electro-anatomical mapping of the left ventricle using minimal cost geodesics

  • Cárdenes, Rubén
  • Sebastián Aguilar, Rafael, 1978-
  • Soto-Iglesias, David
  • Berruezo, Antonio
  • Camara, Oscar
The electrical activation of the heart is a complex physiological process that is essential for the understanding of several cardiac dysfunctions, such as ventricular tachycardia (VT). Nowadays, patient-specific activation times on ventricular chambers can be estimated from electro-anatomical maps, providing crucial information to clinicians for guiding cardiac radio-frequency ablation treatment. However, some relevant electrical pathways such as those of the Purkinje system are very difficult to interpret from these maps due to sparsity of data and the limited spatial resolution of the system. We present here a novel method to estimate these fast electrical pathways from the local activations maps (LATs) obtained from electro-anatomical maps. The location of Purkinje-myocardial junctions (PMJs) is estimated considering them as critical points of a distance map defined by the activation maps, and then minimal cost geodesic paths are computed on the ventricular surface between the detected junctions. Experiments to validate the proposed method have been carried out in simplified and realistic simulated data, showing good performance on recovering the main characteristics of simulated Purkinje networks (e.g. PMJs). A feasibility study with real cases of fascicular VT was also performed, showing promising results., This work is partially funded by the Sub-programa de Proyectos de Investigación en Salud Instituto de Salud Carlos III, Spain (FIS - PI11/01709), by Spanish Ministry of Economy and Competitiveness (TIN2011-28067 and TIN2012-35874), and by eTorso project (GV/2013/094) from Generalitat Valenciana. The authors thank specially Dr. Bart Bijnens for its comments and suggestions, and Dr. David Andreu and Dr. Juan Fernandez-Armenta for their assistance in the clinical data collection.
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Quantitative analysis of electro-anatomical maps: application to an experimental model of left bundle branch block/cardiac resynchronization therapy

  • Soto-Iglesias, David
  • Duchateau, Nicolas
  • Butakoff, Constantine
  • Andreu Martínez, David
  • Fernández-Armenta, Juan
  • Bijnens, Bart
  • Berruezo Sánchez, Antonio
  • Sitges, Marta
  • Camara, Oscar
Electro-anatomical maps (EAMs) are commonly acquired in clinical routine for guiding ablation therapies. They provide voltage and activation time information on a 3-D anatomical mesh representation, making them useful for analyzing the electrical activation patterns in specific pathologies. However, the variability between the different acquisitions and anatomies hampers the comparison between different maps. This paper presents two contributions for the analysis of electrical patterns in EAM data from biventricular surfaces of cardiac chambers. The first contribution is an integrated automatic 2-D disk representation (2-D bull's eye plot) of the left ventricle (LV) and right ventricle (RV) obtained with a quasi-conformal mapping from the 3-D EAM meshes, that allows an analysis of cardiac resynchronization therapy (CRT) lead positioning, interpretation of global (total activation time), and local indices (local activation time (LAT), surrogates of conduction velocity, inter-ventricular, and transmural delays) that characterize changes in the electrical activation pattern. The second contribution is a set of indices derived from the electrical activation: speed maps, computed from LAT values, to study the electrical wave propagation, and histograms of isochrones to analyze regional electrical heterogeneities in the ventricles. We have applied the proposed methods to look for the underlying physiological mechanisms of left bundle branch block (LBBB) and CRT, with the goal of optimizing the therapy by improving CRT response. To better illustrate the benefits of the proposed tools, we created a set of synthetically generated and fully controlled activation patterns, where the proposed representation and indices were validated. Then, the proposed analysis tools are used to analyze EAM data from an experimental swine model of induced LBBB with an implanted CRT device. We have analyzed and compared the electrical activation patterns at baseline, LBBB, and CRT stages in four animals: two without any structural disease and two with an induced infarction. By relating the CRT lead location with electrical dyssynchrony, we evaluated current hypotheses about lead placement in CRT and showed that optimal pacing sites should target the RV lead close to the apex and the LV one distant from it., This study was partially funded by the Spanish Ministry of Science and Innovation (TIN2011-28067), the Spanish Industrial and Technological Development Center (cvREMOD-CEN-20091044), the Seventh Framework Programme (FP7/2007-2013) for research, technological and demonstration under grant agreement VP2HF (nº 611823), and the Spanish Ministry of Economy and Competitiveness under the Maria de Maeztu Units of Excellence Programme (MDM-2015-0502).
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Patient independent representation of the detailed cardiac ventricular anatomy

  • Paun, Bruno
  • Bijnens, Bart
  • Iles, Tinen
  • Iaizzo, Paul A.
  • Butakoff, Constantine
Reparameterization of surfaces is a widely used tool in computer graphics known mostly from the remeshing algorithms. Recently, the surface reparameterization techniques started to gain popularity in the field of medical imaging, but mostly for convenient 2D visualization of the information initially represented on 3D surfaces (e.g. continuous bulls-eye plot). However, by consistently mapping the 3D information to the same 2D domain, surface reparameterization techniques allow us to put into correspondence anatomical shapes of inherently different geometry. In this paper, we propose a method for anatomical parameterization of cardiac ventricular anatomies that include myocardium, trabeculations, tendons and papillary muscles. The proposed method utilizes a quasi-conformal flattening of the myocardial surfaces of the left and right cardiac ventricles and extending it to cover the interior of the cavities using the local coordinates given by the solution of the Laplace’s equation. Subsequently, we define a geometry independent representation for the detailed cardiac left and right ventricular anatomies that can be used for convenient visualization and statistical analysis of the trabeculations in a population. Lastly we show how it can be used for mapping the detailed cardiac anatomy between different hearts, which is of considerable interest for detailed cardiac computational models or shape atlases., Paun is supported by the grant FI-DGR 2014 (2014 FI B01238) from the Generalitat de Catalunya. The research leading to these results has received funding from the EU FP7 for research, technological development and demonstration under grant agreement VP2HF (no. 611823) and from the Spanish Ministry of Economy and Competitiveness (grant TIN2011-28067, TIN2014-52923-R, the Maria de Maeztu Units of Excellence Programme MDM-2015-0502) and FEDER.
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Estimation of electrical pathways finding minimal cost paths from electro-anatomical mapping of the left ventricle

  • Bijnens, Bart
  • Cardenes, Rubén
  • Sebastián Aguilar, Rafael, 1978-
  • Soto-Iglesias, David
  • Andreu Martínez, David
  • Fernández-Armenta, Juan
  • Berruezo Sánchez, Antonio
  • Camara, Oscar
The electrical activation of the heart is a complex physiological process that is essential for the understanding of several cardiac dysfunctions, such as ventricular tachycardia (VT). Nowadays, electro-anatomical mappings of patient-specific activation times on the left ventricle surface can be estimated, providing crucial information to the clinicians for guiding cardiac treatment. However, some electrical pathways of particular interest such as Purkinje or still viable conduction channels are difficult to interpret in these maps. We present here a novel method to find some of these electrical pathways using minimal cost paths computations on surface maps. Experiments to validate the proposed method have been carried out in simulated data, and also in clinical data, showing good performance on recovering the main characteristics of simulated Purkinje trees (e.g. end-terminals) and promising results on a real case of fascicular VT., This work is partially funded by the Sub-programa de Proyectos de Investigación en Salud Instituto de Salud Carlos III, Spain (FIS - PI11/01709), by Spanish Ministry of Science and Innovation (TIN2011-28067), and by eTorso project (2013-001404) from Generalitat de Valencia.
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Automatic activation mapping and origin identification of idiopathic outflow tract ventricular arrhythmias

  • Alcaine, Alejandro
  • Soto-Iglesias, David
  • Acosta, Juan Carlos
  • Korshunov, Viatcheslav
  • Penela, Diego
  • Martínez, Mikel
  • Linhart, Markus
  • Andreu Martínez, David
  • Fernández-Armenta, Juan
  • Laguna, Pablo
  • Martínez, Juan Pablo
  • Camara, Oscar
  • Berruezo Sánchez, Antonio
Purpose: Activation mapping is used to guide ablation of idiopathic outflow tract ventricular arrhythmias (OTVAs). Isochronal activation maps help to predict the site of origin (SOO): left vs right outflow tract (OT). We evaluate an algorithm for automatic activation mapping based on the onset of the bipolar electrogram (EGM) signal for predicting the SOO and the effective ablation site in OTVAs. Methods: Eighteen patients undergoing ablation due to idiopathic OTVAs were studied (12 with left ventricle OT origin). Right ventricle activation maps were obtained offline with an automatic algorithm and compared with manual annotation maps obtained during the intervention. Local activation time (LAT) accuracy was assessed, as well as the performance of the 10 ms earliest activation site (EAS) isochronal area in predicting the SOO. Results: High correlation was observed between manual and automatic LATs (Spearman's: 0.86 and Lin's: 0.85, both p < 0.01). The EAS isochronal area were closely located in both map modalities (5.55 ± 3.56 mm) and at a similar distance from the effective ablation site (0.15 ± 2.08 mm difference, p = 0.859). The 10 ms isochronal area longitudinal/perpendicular diameter ratio measured from automatic maps showed slightly superior SOO identification (67% sensitivity, 100% specificity) compared with manual maps (67% sensitivity, 83% specificity). Conclusions: Automatic activation mapping based on the bipolar EGM onset allows fast, accurate and observer-independent identification of the SOO and characterization of the spreading of the activation wavefront in OTVAs., This study was supported by personal grants to A.A. refs.: BES-2011-046644 and EEBB-I-15-09466, by projects TEC2013-42140-R, DPI2016-75458-R and TIN2011-28067 from Ministerio de Economía y Competitividad. Also by Gobierno de Aragón (Spain) and European Social Fund (EU) through Grupo Consolidado BSICoS ref.: T 96. The CIBER-BBN is an initiative of Instituto de Salud Carlos III. This work was also supported in part by the project PI14/00759, integrated in the Plan Nacional de I + D + i and co-funded by the ISCIII-Subdirección General de Evaluación and the Fondo Europeo de Desarrollo Regional (FEDER).
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Relationship between the left ventricular size and the amount of trabeculations

  • Paun, Bruno
  • Bijnens, Bart
  • Butakoff, Constantine
Contemporary imaging modalities offer non-invasive quantification of myocardial deformation; however, they make gross assumptions about internal structure of the cardiac walls. Our aim is to study the possible impact of the trabeculations on the stroke volume, strain and capacity of differently sized ventricles. The cardiac left ventricle is represented by an ellipsoid and the trabeculations by a tissue occupying a fixed volume. The ventricular contraction is modelled by scaling the ellipsoid whereupon the measurements of longitudinal strain, end-diastolic, end-systolic and stroke volume are derived and compared. When the trabeculated and non-trabeculated ventricles, having the same geometry and deformation pattern, contain the same amount of blood and contract with the same strain, we observed an increased stroke volume in our model of the trabeculated ventricle. When these ventricles contain and eject the same amount of blood, we observed a reduced strain in the trabeculated case. We identified that a trade-off between the strain and the amount of trabeculations could be reached with a 0.35-0.41 cm dense trabeculated layer, without blood filled recesses (for a ventricle with end-diastolic volume of about 150 ml). A trabeculated ventricle can work at lower strains compared to a non-trabeculated ventricle to produce the same stroke volume, which could be a possible explanation why athletes and pregnant women develop reversible signs of left ventricular non-compaction, since the trabeculations could help generating extra cardiac output. This knowledge might help to assess heart failure patients with dilated cardiomyopathies who often show signs of non-compaction., The research leading to these results has received funding by EU FP7 for research, technological development and demonstration under grant agreement VP2HF (no. 611823), Spanish Ministry of Economy and Competitiveness (grant TIN2011-28067, TIN2014-52923-R, the Maria de Maeztu Units of Excellence Programme MDM-2015-0502) and FEDER. B. Paun is supported by the grant FI-DGR 2014 (2014 FI B01238) from the Generalitat de Catalunya. C. Butakoff is supported by a grant from the Fundació La Marató de TV3 (nº 20154031), Spain.
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Standardized unfold mapping: a technique to permit left atrial regional data display and analysis

  • Williams, Steven E.
  • Tobón Gómez, Catalina, 1981-
  • Zuluaga, Maria A.
  • Chubb, Henry
  • Butakoff, Constantine
  • Karim, Rashed
  • Ahmed, Elena
  • Camara, Oscar
  • Rhode, Kawal
Purpose: Left atrial arrhythmia substrate assessment can involve multiple imaging and electrical modalities, but visual analysis of data on 3D surfaces is time-consuming and suffers from limited reproducibility. Unfold maps (e.g., the left ventricular bull’s eye plot) allow 2D visualization, facilitate multimodal data representation, and provide a common reference space for inter-subject comparison. The aim of this work is to develop a method for automatic representation of multimodal information on a left atrial standardized unfold map (LA-SUM). Methods: The LA-SUM technique was developed and validated using 18 electroanatomic mapping (EAM) LA geometries before being applied to ten cardiac magnetic resonance/EAM paired geometries. The LA-SUM was defined as an unfold template of an average LA mesh, and registration of clinical data to this mesh facilitated creation of new LA-SUMs by surface parameterization. Results: The LA-SUM represents 24 LA regions on a flattened surface. Intra-observer variability of LA-SUMs for both EAM and CMR datasets was minimal; root-mean square difference of 0.008 ± 0.010 and 0.007 ± 0.005 ms (local activation time maps), 0.068 ± 0.063 gs (force-time integral maps), and 0.031 ± 0.026 (CMR LGE signal intensity maps). Following validation, LA-SUMs were used for automatic quantification of post-ablation scar formation using CMR imaging, demonstrating a weak but significant relationship between ablation force-time integral and scar coverage (R 2 = 0.18, P < 0.0001). Conclusions: The proposed LA-SUM displays an integrated unfold map for multimodal information. The method is applicable to any LA surface, including those derived from imaging and EAM systems. The LA-SUM would facilitate standardization of future research studies involving segmental analysis of the LA., This work was supported by the National Institute for Health Research (NIHR) Biomedical Research Centre at Guy’s and St Thomas’ NHS Foundation Trust and King’s College London. The views expressed here are those of the authors and not necessarily those of the NHS, the NIHR, or the Department of Health. M.A. Zuluaga is funded by the EPSRC (EP/H046410/1). C. Butakoff and O. Camara are funded by the Seventh Framework Programme (FP7/2007-2013) under grant agreement n° 611823 and by the Spanish Ministry of Economy and Competitiveness (TIN2011-28067).
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Meshless electrophysiological modeling of cardiac resynchronization therapy: benchmark analysis with finite-element methods in experimental data

  • Albors Lucas, Carlos
  • Lluch Álvarez, Èric
  • Gomez, Juan Francisco
  • Cedilnik, Nicolas
  • Mountris, Konstantinos A.
  • Mansi, Tommaso
  • Khamzin, Svyatoslav
  • Dokuchaev, Arsenii
  • Solovyova, Olga
  • Pueyo, Esther
  • Sermesant, Maxime
  • Sebastian, Rafael
  • Morales, Hernán G.
  • Camara, Oscar
Computational models of cardiac electrophysiology are promising tools for reducing the rates of non-response patients suitable for cardiac resynchronization therapy (CRT) by optimizing electrode placement. The majority of computational models in the literature are mesh-based, primarily using the finite element method (FEM). The generation of patient-specific cardiac meshes has traditionally been a tedious task requiring manual intervention and hindering the modeling of a large number of cases. Meshless models can be a valid alternative due to their mesh quality independence. The organization of challenges such as the CRT-EPiggy19, providing unique experimental data as open access, enables benchmarking analysis of different cardiac computational modeling solutions with quantitative metrics. We present a benchmark analysis of a meshless-based method with finite-element methods for the prediction of cardiac electrical patterns in CRT, based on a subset of the CRT-EPiggy19 dataset. A data assimilation strategy was designed to personalize the most relevant parameters of the electrophysiological simulations and identify the optimal CRT lead configuration. The simulation results obtained with the meshless model were equivalent to FEM, with the most relevant aspect for accurate CRT predictions being the parameter personalization strategy (e.g., regional conduction velocity distribution, including the Purkinje system and CRT lead distribution)., This work was supported in part by the Spanish Ministry of Science and Innovation (TIN2011-28067, REDINSCOR RD06/003/008, PID2019-105674RB-I00), the Spanish Industrial and Technological Development Center (cvREMOD-CEN-20091044), the Spanish Ministry of Economy and Competitiveness under the Maria de Maeztu Units of Excellence Programme (MDM-2015-0502), the Government of Aragón (Spain) (LMP94_21), the Directorate General of Science Policy of the Generalitat Valenciana (Spain) (PROMETEU 2016/088), the Seventh Framework Programme (FP7/2007-2013) for research, technological and demonstration under grant agreement VP2HF (no. 611823), by the RSF grant no. 19-14-00134, and by European Regional Development Fund (ERDF) DPI2016-75799-R (AEI/ERDF, EU).
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Analysis of microstructure of the cardiac conduction system based on three-dimensional confocal microscopy

  • Romero García, Daniel
  • Camara, Oscar
  • Sachse, Frank
  • Sebastián Aguilar, Rafael, 1978-
The specialised conducting tissues present in the ventricles are responsible for the fast distribution of the electrical impulse from the atrio-ventricular node to regions in the subendocardial myocardium. Characterisation of anatomical features of the specialised conducting tissues in the ventricles is highly challenging, in particular its most distal section, which is connected to the working myocardium via Purkinje-myocardial junctions. The goal of this work is to characterise the architecture of the distal section of the Purkinje network by differentiating Purkinje cells from surrounding tissue, performing a segmentation of Purkinje fibres at cellular scale, and mathematically describing its morphology and interconnections. Purkinje cells from rabbit hearts were visualised by confocal microscopy using wheat germ agglutinin labelling. A total of 16 3D stacks including labeled Purkinje cells were collected, and semi-automatically segmented. State-of-the-art graph metrics were applied to estimate regional and global features of the Purkinje network complexity. Two types of cell types, tubular and star-like, were characterised from 3D segmentations. The analysis of 3D imaging data confirms the previously suggested presence of two types of Purkinje-myocardium connections, a 2D interconnection sheet and a funnel one, in which the narrow side of a Purkinje fibre connect progressively to muscle fibres. The complex network analysis of interconnected Purkinje cells showed no small-world connectivity or assortativity properties. These results might help building more realistic computational PK systems at high resolution levels including different cell configurations and shapes. Better knowledge on the organisation of the network might help in understanding the effects that several treatments such as radio-frequency ablation might have when the PK system is disrupted locally., This work was supported by Ministerio de Economia y Competitividad, grant number TIN2011-28067 (www.mineco.gov.es): OC; and Ministerio de Economia y Competitividad, the European Commission (European Regional Development Funds—ERDF—FEDER) grant number TIN2014-59932-JIN: RS. Furthermore, we acknowledge awards from the Nora Eccles Treadwell 484 Foundation. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript. We acknowledge Prof. A.F. Frangi, University of Sheffield, UK for his financial support. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Repositorio Digital de la UPF
Publication Artículo científico (JournalArticle)

Quantification of the detailed cardiac left ventricular trabecular morphogenesis in the mouse embryo

  • Paun, Bruno
  • Bijnens, Bart
  • Cook, Andrew C.
  • Mohun, Timothy J.
  • Butakoff, Constantine
During embryogenesis, a mammalian heart develops from a simple tubular shape into a complex 4-chamber organ, going through four distinct phases: early primitive tubular heart, emergence of trabeculations, trabecular remodeling and development of the compact myocardium. In this paper we propose a framework for standardized and subject-independent 3D regional myocardial complexity analysis, applied to analysis of the developmentevolution of the mouse left ventricle. We propose a standardized subdivision of the myocardium into 3D overlapping regions (in our case 361) and a novel visualization of myocardial complexity, whereupon we: 1) extend the fractal dimension, commonly applied to image slices, to 3D and 2) use volume occupied by the trabeculations in each region together with their surface area, in order to quantify myocardial complexity. The latter provides an intuitive characterization of the complexity, given that compact myocardium will tend to occupy a larger volume with little surface area while high surface area with low volume will correspond to highly trabeculated areas. Using 50 mouse embryo images at 5 di erent gestational ages (10 subjects per gestational age), we demonstrate how the proposed representation and complexity measures describe the developmentevolution of LV myocardial complexity. The mouse embryo data was acquired using high resolution episcopic microscopy. The complexity analysis per region was carried out using: 3D fractal dimension, myocardial volume, myocardial surface area and ratio between the two. The analysis of gestational ages was performed on embryos of 14.5, 15.5, 16.5, 17.5 and 18.5 embryonic days, and demonstrated that the regional complexity of the trabeculations increases longitudinally from the base to the apex, with a maximum around the middle. The overall complexity decreases with gestational age, being most complex at 14.5. Circumferentially, at ages 14.5, 15.5 and 16.5, the trabeculations show similar complexity everywhere except for the anteroseptal and inferolateral area of the wall, where it is smaller. At 17.5 days, the regions of high complexity become more localized towards the inferoseptal and anterolateral parts of the wall. At 18.5 days, the high complexity area exhibits further localization at the inferoseptal and anterior part of the wall., B. Paun is supported by the grant FI-DGR 2014 (2014 FI B01238) from the Generalitat de Catalunya. The research leading to these results has received funding from the EU FP7 for research, technological development and demonstration under grant agreement VP2HF (no. 611823) and from the Spanish Ministry of Economy and Competitiveness (grant TIN2011-28067, TIN2014-52923-R, the Maria de Maeztu Units of Excellence Programme MDM-2015-0502) and FEDER. C. Butakoff is supported by the grant from the Fundació La Marató de TV3 (20154031), Spain. The HREM datasets used in this manuscript were provided and collected by Dr. T. J. Mohun, Emily Hardman and Fabrice Prin from the Francis Crick Institute, London.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Three-dimensional cardiac computational modelling: methods, features and applications

  • López Pérez, Alejandro Daniel
  • Sebastián Aguilar, Rafael
  • Ferrero De Loma-Osorio, José María|||0000-0003-4200-9225
[EN] The combination of computational models and biophysical simulations can help to interpret an array of experimental data and contribute to the understanding, diagnosis and treatment of complex diseases such as cardiac arrhythmias. For this reason, three-dimensional (3D) cardiac computational modelling is currently a rising field of research. The advance of medical imaging technology over the last decades has allowed the evolution from generic to patient-specific 3D cardiac models that faithfully represent the anatomy and different cardiac features of a given alive subject. Here we analyse sixty representative 3D cardiac computational models developed and published during the last fifty years, describing their information sources, features, development methods and online availability. This paper also reviews the necessary components to build a 3D computational model of the heart aimed at biophysical simulation, paying especial attention to cardiac electrophysiology (EP), and the existing approaches to incorporate those components. We assess the challenges associated to the different steps of the building process, from the processing of raw clinical or biological data to the final application, including image segmentation, inclusion of substructures and meshing among others. We briefly outline the personalisation approaches that are currently available in 3D cardiac computational modelling. Finally, we present examples of several specific applications, mainly related to cardiac EP simulation and model-based image analysis, showing the potential usefulness of 3D cardiac computational modelling into clinical environments as a tool to aid in the prevention, diagnosis and treatment of cardiac diseases., This work was partially supported by the "VI Plan Nacional de Investigacion Cientifica, Desarrollo e Innovacion Tecnologica" from the Ministerio de Economia y Competitividad of Spain (TIN2012-37546-C03-01 and TIN2011-28067) and the European Commission (European Regional Development Funds - ERDF - FEDER) and by "eTorso project" (GVA/2013-001404) from the Generalitat Valenciana (Spain). ALP is financially supported by the program "Ayudas para contratos predoctorales para la formacion de doctores" from the Ministerio de Economia y Competitividad of Spain (BES-2013-064089).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Automatic activation mapping and origin identification of idiopathic outflow tract ventricular arrhythmias

  • Alcaine, A.
  • Soto-Iglesias, D.
  • Acosta, J.
  • Korshunov, V.
  • Penela, D.
  • Martínez, M.
  • Linhart, M.
  • Andreu, D.
  • Fernández-Armenta, J.
  • Laguna, P.
  • Martínez, J.P.
  • Camara, O.
  • Berruezo, A.
Purpose: Activation mapping is used to guide ablation of idiopathic outflow tract ventricular arrhythmias (OTVAs). Isochronal activation maps help to predict the site of origin (SOO): left vs right outflow tract (OT). We evaluate an algorithm for automatic activation mapping based on the onset of the bipolar electrogram (EGM) signal for predicting the SOO and the effective ablation site in OTVAs. Methods: Eighteen patients undergoing ablation due to idiopathic OTVAs were studied (12 with left ventricle OT origin). Right ventricle activation maps were obtained offline with an automatic algorithm and compared with manual annotation maps obtained during the intervention. Local activation time (LAT) accuracy was assessed, as well as the performance of the 10 ms earliest activation site (EAS) isochronal area in predicting the SOO. Results: High correlation was observed between manual and automatic LATs (Spearman's: 0.86 and Lin's: 0.85, both p < 0.01). The EAS isochronal area were closely located in both map modalities (5.55 ± 3.56 mm) and at a similar distance from the effective ablation site (0.15 ± 2.08 mm difference, p = 0.859). The 10 ms isochronal area longitudinal/perpendicular diameter ratio measured from automatic maps showed slightly superior SOO identification (67% sensitivity, 100% specificity) compared with manual maps (67% sensitivity, 83% specificity). Conclusions: Automatic activation mapping based on the bipolar EGM onset allows fast, accurate and observer-independent identification of the SOO and characterization of the spreading of the activation wavefront in OTVAs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Meshless electrophysiological modeling of cardiac resynchronization therapy—benchmark analysis with finite-element methods in experimental data

  • Albors, C.
  • Lluch, È.
  • Gomez, J. F.
  • Cedilnik, N.
  • Mountris, K. A.
  • Mansi, T.
  • Khamzin, S.
  • Dokuchaev, A.
  • Solovyova, O.
  • Pueyo, E.
  • Sermesant, M.
  • Sebastian, R.
  • Morales, H. G.
  • Camara, O.
Computational models of cardiac electrophysiology are promising tools for reducing the rates of non-response patients suitable for cardiac resynchronization therapy (CRT) by optimizing electrode placement. The majority of computational models in the literature are mesh-based, primarily using the finite element method (FEM). The generation of patient-specific cardiac meshes has traditionally been a tedious task requiring manual intervention and hindering the modeling of a large number of cases. Meshless models can be a valid alternative due to their mesh quality independence. The organization of challenges such as the CRT-EPiggy19, providing unique experimental data as open access, enables benchmarking analysis of different cardiac computational modeling solutions with quantitative metrics. We present a benchmark analysis of a meshless-based method with finite-element methods for the prediction of cardiac electrical patterns in CRT, based on a subset of the CRT-EPiggy19 dataset. A data assimilation strategy was designed to personalize the most relevant parameters of the electrophysiological simulations and identify the optimal CRT lead configuration. The simulation results obtained with the meshless model were equivalent to FEM, with the most relevant aspect for accurate CRT predictions being the parameter personalization strategy (e.g., regional conduction velocity distribution, including the Purkinje system and CRT lead distribution). © 2022 by the authors. Licensee MDPI, Basel, Switzerland.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Quantification of the detailed cardiac left ventricular trabecular morphogenesis in the mouse embryo

  • Paun, Bruno
  • Bijnens, Bart
  • Cook, Andrew C.
  • Mohun, Timothy J.
  • Butakoff, Constantine
During embryogenesis, a mammalian heart develops from a simple tubular shape into a complex 4-chamber organ, going through four distinct phases: early primitive tubular heart, emergence of trabeculations, trabecular remodeling and development of the compact myocardium. In this paper we propose a framework for standardized and subject-independent 3D regional myocardial complexity analysis, applied to analysis of the developmentevolution of the mouse left ventricle. We propose a standardized subdivision of the myocardium into 3D overlapping regions (in our case 361) and a novel visualization of myocardial complexity, whereupon we: 1) extend the fractal dimension, commonly applied to image slices, to 3D and 2) use volume occupied by the trabeculations in each region together with their surface area, in order to quantify myocardial complexity. The latter provides an intuitive characterization of the complexity, given that compact myocardium will tend to occupy a larger volume with little surface area while high surface area with low volume will correspond to highly trabeculated areas. Using 50 mouse embryo images at 5 di erent gestational ages (10 subjects per gestational age), we demonstrate how the proposed representation and complexity measures describe the developmentevolution of LV myocardial complexity. The mouse embryo data was acquired using high resolution episcopic microscopy. The complexity analysis per region was carried out using: 3D fractal dimension, myocardial volume, myocardial surface area and ratio between the two. The analysis of gestational ages was performed on embryos of 14.5, 15.5, 16.5, 17.5 and 18.5 embryonic days, and demonstrated that the regional complexity of the trabeculations increases longitudinally from the base to the apex, with a maximum around the middle. The overall complexity decreases with gestational age, being most complex at 14.5. Circumferentially, at ages 14.5, 15.5 and 16.5, the trabeculations show similar complexity everywhere except for the anteroseptal and inferolateral area of the wall, where it is smaller. At 17.5 days, the regions of high complexity become more localized towards the inferoseptal and anterolateral parts of the wall. At 18.5 days, the high complexity area exhibits further localization at the inferoseptal and anterior part of the wall., B. Paun is supported by the grant FI-DGR 2014 (2014 FI B01238) from the Generalitat de Catalunya. The research leading to these results has received funding from the EU FP7 for research, technological development and demonstration under grant agreement VP2HF (no. 611823) and from the Spanish Ministry of Economy and Competitiveness (grant TIN2011-28067, TIN2014-52923-R, the Maria de Maeztu Units of Excellence Programme MDM-2015-0502) and FEDER. C. Butakoff is supported by the grant from the Fundació La Marató de TV3 (20154031), Spain. The HREM datasets used in this manuscript were provided and collected by Dr. T. J. Mohun, Emily Hardman and Fabrice Prin from the Francis Crick Institute, London.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Estimation of electrical pathways finding minimal cost paths from electro-anatomical mapping of the left ventricle

  • Bijnens, Bart
  • Cardenes, Rubén
  • Sebastián Aguilar, Rafael, 1978-
  • Soto-Iglesias, David
  • Andreu Martínez, David
  • Fernández-Armenta, Juan
  • Berruezo Sánchez, Antonio
  • Camara, Oscar
The electrical activation of the heart is a complex physiological process that is essential for the understanding of several cardiac dysfunctions, such as ventricular tachycardia (VT). Nowadays, electro-anatomical mappings of patient-specific activation times on the left ventricle surface can be estimated, providing crucial information to the clinicians for guiding cardiac treatment. However, some electrical pathways of particular interest such as Purkinje or still viable conduction channels are difficult to interpret in these maps. We present here a novel method to find some of these electrical pathways using minimal cost paths computations on surface maps. Experiments to validate the proposed method have been carried out in simulated data, and also in clinical data, showing good performance on recovering the main characteristics of simulated Purkinje trees (e.g. end-terminals) and promising results on a real case of fascicular VT., This work is partially funded by the Sub-programa de Proyectos de Investigación en Salud Instituto de Salud Carlos III, Spain (FIS - PI11/01709), by Spanish Ministry of Science and Innovation (TIN2011-28067), and by eTorso project (2013-001404) from Generalitat de Valencia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Estimation of Purkinje trees from electro-anatomical mapping of the left ventricle using minimal cost geodesics

  • Cárdenes, Rubén
  • Sebastián Aguilar, Rafael, 1978-
  • Soto-Iglesias, David
  • Berruezo, Antonio
  • Camara, Oscar
The electrical activation of the heart is a complex physiological process that is essential for the understanding of several cardiac dysfunctions, such as ventricular tachycardia (VT). Nowadays, patient-specific activation times on ventricular chambers can be estimated from electro-anatomical maps, providing crucial information to clinicians for guiding cardiac radio-frequency ablation treatment. However, some relevant electrical pathways such as those of the Purkinje system are very difficult to interpret from these maps due to sparsity of data and the limited spatial resolution of the system. We present here a novel method to estimate these fast electrical pathways from the local activations maps (LATs) obtained from electro-anatomical maps. The location of Purkinje-myocardial junctions (PMJs) is estimated considering them as critical points of a distance map defined by the activation maps, and then minimal cost geodesic paths are computed on the ventricular surface between the detected junctions. Experiments to validate the proposed method have been carried out in simplified and realistic simulated data, showing good performance on recovering the main characteristics of simulated Purkinje networks (e.g. PMJs). A feasibility study with real cases of fascicular VT was also performed, showing promising results., This work is partially funded by the Sub-programa de Proyectos de Investigación en Salud Instituto de Salud Carlos III, Spain (FIS - PI11/01709), by Spanish Ministry of Economy and Competitiveness (TIN2011-28067 and TIN2012-35874), and by eTorso project (GV/2013/094) from Generalitat Valenciana. The authors thank specially Dr. Bart Bijnens for its comments and suggestions, and Dr. David Andreu and Dr. Juan Fernandez-Armenta for their assistance in the clinical data collection.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Patient independent representation of the detailed cardiac ventricular anatomy

  • Paun, Bruno
  • Bijnens, Bart
  • Iles, Tinen
  • Iaizzo, Paul A.
  • Butakoff, Constantine
Reparameterization of surfaces is a widely used tool in computer graphics known mostly from the remeshing algorithms. Recently, the surface reparameterization techniques started to gain popularity in the field of medical imaging, but mostly for convenient 2D visualization of the information initially represented on 3D surfaces (e.g. continuous bulls-eye plot). However, by consistently mapping the 3D information to the same 2D domain, surface reparameterization techniques allow us to put into correspondence anatomical shapes of inherently different geometry. In this paper, we propose a method for anatomical parameterization of cardiac ventricular anatomies that include myocardium, trabeculations, tendons and papillary muscles. The proposed method utilizes a quasi-conformal flattening of the myocardial surfaces of the left and right cardiac ventricles and extending it to cover the interior of the cavities using the local coordinates given by the solution of the Laplace’s equation. Subsequently, we define a geometry independent representation for the detailed cardiac left and right ventricular anatomies that can be used for convenient visualization and statistical analysis of the trabeculations in a population. Lastly we show how it can be used for mapping the detailed cardiac anatomy between different hearts, which is of considerable interest for detailed cardiac computational models or shape atlases., Paun is supported by the grant FI-DGR 2014 (2014 FI B01238) from the Generalitat de Catalunya. The research leading to these results has received funding from the EU FP7 for research, technological development and demonstration under grant agreement VP2HF (no. 611823) and from the Spanish Ministry of Economy and Competitiveness (grant TIN2011-28067, TIN2014-52923-R, the Maria de Maeztu Units of Excellence Programme MDM-2015-0502) and FEDER.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Analysis of microstructure of the cardiac conduction system based on three-dimensional confocal microscopy

  • Romero García, Daniel
  • Camara, Oscar
  • Sachse, Frank
  • Sebastián Aguilar, Rafael, 1978-
The specialised conducting tissues present in the ventricles are responsible for the fast distribution of the electrical impulse from the atrio-ventricular node to regions in the subendocardial myocardium. Characterisation of anatomical features of the specialised conducting tissues in the ventricles is highly challenging, in particular its most distal section, which is connected to the working myocardium via Purkinje-myocardial junctions. The goal of this work is to characterise the architecture of the distal section of the Purkinje network by differentiating Purkinje cells from surrounding tissue, performing a segmentation of Purkinje fibres at cellular scale, and mathematically describing its morphology and interconnections. Purkinje cells from rabbit hearts were visualised by confocal microscopy using wheat germ agglutinin labelling. A total of 16 3D stacks including labeled Purkinje cells were collected, and semi-automatically segmented. State-of-the-art graph metrics were applied to estimate regional and global features of the Purkinje network complexity. Two types of cell types, tubular and star-like, were characterised from 3D segmentations. The analysis of 3D imaging data confirms the previously suggested presence of two types of Purkinje-myocardium connections, a 2D interconnection sheet and a funnel one, in which the narrow side of a Purkinje fibre connect progressively to muscle fibres. The complex network analysis of interconnected Purkinje cells showed no small-world connectivity or assortativity properties. These results might help building more realistic computational PK systems at high resolution levels including different cell configurations and shapes. Better knowledge on the organisation of the network might help in understanding the effects that several treatments such as radio-frequency ablation might have when the PK system is disrupted locally., This work was supported by Ministerio de Economia y Competitividad, grant number TIN2011-28067 (www.mineco.gov.es): OC; and Ministerio de Economia y Competitividad, the European Commission (European Regional Development Funds—ERDF—FEDER) grant number TIN2014-59932-JIN: RS. Furthermore, we acknowledge awards from the Nora Eccles Treadwell 484 Foundation. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript. We acknowledge Prof. A.F. Frangi, University of Sheffield, UK for his financial support. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Meshless electrophysiological modeling of cardiac resynchronization therapy: benchmark analysis with finite-element methods in experimental data

  • Albors Lucas, Carlos
  • Lluch Álvarez, Èric
  • Gomez, Juan Francisco
  • Cedilnik, Nicolas
  • Mountris, Konstantinos A.
  • Mansi, Tommaso
  • Khamzin, Svyatoslav
  • Dokuchaev, Arsenii
  • Solovyova, Olga
  • Pueyo, Esther
  • Sermesant, Maxime
  • Sebastian, Rafael
  • Morales, Hernán G.
  • Camara, Oscar
Computational models of cardiac electrophysiology are promising tools for reducing the rates of non-response patients suitable for cardiac resynchronization therapy (CRT) by optimizing electrode placement. The majority of computational models in the literature are mesh-based, primarily using the finite element method (FEM). The generation of patient-specific cardiac meshes has traditionally been a tedious task requiring manual intervention and hindering the modeling of a large number of cases. Meshless models can be a valid alternative due to their mesh quality independence. The organization of challenges such as the CRT-EPiggy19, providing unique experimental data as open access, enables benchmarking analysis of different cardiac computational modeling solutions with quantitative metrics. We present a benchmark analysis of a meshless-based method with finite-element methods for the prediction of cardiac electrical patterns in CRT, based on a subset of the CRT-EPiggy19 dataset. A data assimilation strategy was designed to personalize the most relevant parameters of the electrophysiological simulations and identify the optimal CRT lead configuration. The simulation results obtained with the meshless model were equivalent to FEM, with the most relevant aspect for accurate CRT predictions being the parameter personalization strategy (e.g., regional conduction velocity distribution, including the Purkinje system and CRT lead distribution)., This work was supported in part by the Spanish Ministry of Science and Innovation (TIN2011-28067, REDINSCOR RD06/003/008, PID2019-105674RB-I00), the Spanish Industrial and Technological Development Center (cvREMOD-CEN-20091044), the Spanish Ministry of Economy and Competitiveness under the Maria de Maeztu Units of Excellence Programme (MDM-2015-0502), the Government of Aragón (Spain) (LMP94_21), the Directorate General of Science Policy of the Generalitat Valenciana (Spain) (PROMETEU 2016/088), the Seventh Framework Programme (FP7/2007-2013) for research, technological and demonstration under grant agreement VP2HF (no. 611823), by the RSF grant no. 19-14-00134, and by European Regional Development Fund (ERDF) DPI2016-75799-R (AEI/ERDF, EU).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Automatic activation mapping and origin identification of idiopathic outflow tract ventricular arrhythmias

  • Alcaine, Alejandro
  • Soto-Iglesias, David
  • Acosta, Juan Carlos
  • Korshunov, Viatcheslav
  • Penela, Diego
  • Martínez, Mikel
  • Linhart, Markus
  • Andreu Martínez, David
  • Fernández-Armenta, Juan
  • Laguna, Pablo
  • Martínez, Juan Pablo
  • Camara, Oscar
  • Berruezo Sánchez, Antonio
Purpose: Activation mapping is used to guide ablation of idiopathic outflow tract ventricular arrhythmias (OTVAs). Isochronal activation maps help to predict the site of origin (SOO): left vs right outflow tract (OT). We evaluate an algorithm for automatic activation mapping based on the onset of the bipolar electrogram (EGM) signal for predicting the SOO and the effective ablation site in OTVAs. Methods: Eighteen patients undergoing ablation due to idiopathic OTVAs were studied (12 with left ventricle OT origin). Right ventricle activation maps were obtained offline with an automatic algorithm and compared with manual annotation maps obtained during the intervention. Local activation time (LAT) accuracy was assessed, as well as the performance of the 10 ms earliest activation site (EAS) isochronal area in predicting the SOO. Results: High correlation was observed between manual and automatic LATs (Spearman's: 0.86 and Lin's: 0.85, both p < 0.01). The EAS isochronal area were closely located in both map modalities (5.55 ± 3.56 mm) and at a similar distance from the effective ablation site (0.15 ± 2.08 mm difference, p = 0.859). The 10 ms isochronal area longitudinal/perpendicular diameter ratio measured from automatic maps showed slightly superior SOO identification (67% sensitivity, 100% specificity) compared with manual maps (67% sensitivity, 83% specificity). Conclusions: Automatic activation mapping based on the bipolar EGM onset allows fast, accurate and observer-independent identification of the SOO and characterization of the spreading of the activation wavefront in OTVAs., This study was supported by personal grants to A.A. refs.: BES-2011-046644 and EEBB-I-15-09466, by projects TEC2013-42140-R, DPI2016-75458-R and TIN2011-28067 from Ministerio de Economía y Competitividad. Also by Gobierno de Aragón (Spain) and European Social Fund (EU) through Grupo Consolidado BSICoS ref.: T 96. The CIBER-BBN is an initiative of Instituto de Salud Carlos III. This work was also supported in part by the project PI14/00759, integrated in the Plan Nacional de I + D + i and co-funded by the ISCIII-Subdirección General de Evaluación and the Fondo Europeo de Desarrollo Regional (FEDER).
Recercat. Dipósit de la Recerca de Catalunya
Publication

Fully-Coupled Electromechanical Simulations of the LV Dog Anatomy Using HPC: Model Testing and Verification

  • Aguado-Sierra, Jazmin
  • Santiago, Alfonso
  • Rivero, Matías I.
  • Lopez-Yunta, Mariña
  • Soto-Iglesias, David
  • Dux-Santoy, Lydia
  • Camara, Oscar
  • Vázquez, Mariano
Verification of electro-mechanic models of the heart require a good amount of reliable, high resolution, thorough in-vivo measurements. The detail of the mathematical models used to create simulations of the heart beat vary greatly. Generally, the objective of the simulation determines the modeling approach. However, it is important to exactly quantify the amount of error between the various approaches that can be used to simulate a heart beat by comparing them to ground truth data. The more detailed the model is, the more computing power it requires, we therefore employ a high-performance computing solver throughout this study. We aim to compare models to data measured experimentally to identify the effect of using a mathematical model of fibre orientation versus the measured fibre orientations using DT-MRI. We also use simultaneous endocardial stimuli vs an instantaneous myocardial stimulation to trigger the mechanic contraction. Our results show that synchronisation of the electrical and mechanical events in the heart beat are necessary to create a physiological timing of hemodynamic events. Synchronous activation of all of the myocardium provides an unrealistic timing of hemodynamic events in the cardiac cycle. Results also show the need of establishing a protocol to quantify the zero-pressure configuration of the left ventricular geometry to initiate the simulation protocol; however, the predicted zero-pressure configuration of the same geometry was different, depending on the origin of the fibre field employed., This work has been done with the support of the grant SEV-2011-00067 of Severo Ochoa Program, awarded by the Spanish Government to the Barcelona Supercomputing Center. Part of the research leading to these results has received funding from the Seventh Framework Programme (FP7/2007-2013) under grant agreement n 611823. It has also been partially funded from the by the Spanish Ministry of Economy and Competitiveness (TIN2011-28067)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Relationship between the left ventricular size and the amount of trabeculations

  • Paun, Bruno
  • Bijnens, Bart
  • Butakoff, Constantine
Contemporary imaging modalities offer non-invasive quantification of myocardial deformation; however, they make gross assumptions about internal structure of the cardiac walls. Our aim is to study the possible impact of the trabeculations on the stroke volume, strain and capacity of differently sized ventricles. The cardiac left ventricle is represented by an ellipsoid and the trabeculations by a tissue occupying a fixed volume. The ventricular contraction is modelled by scaling the ellipsoid whereupon the measurements of longitudinal strain, end-diastolic, end-systolic and stroke volume are derived and compared. When the trabeculated and non-trabeculated ventricles, having the same geometry and deformation pattern, contain the same amount of blood and contract with the same strain, we observed an increased stroke volume in our model of the trabeculated ventricle. When these ventricles contain and eject the same amount of blood, we observed a reduced strain in the trabeculated case. We identified that a trade-off between the strain and the amount of trabeculations could be reached with a 0.35-0.41 cm dense trabeculated layer, without blood filled recesses (for a ventricle with end-diastolic volume of about 150 ml). A trabeculated ventricle can work at lower strains compared to a non-trabeculated ventricle to produce the same stroke volume, which could be a possible explanation why athletes and pregnant women develop reversible signs of left ventricular non-compaction, since the trabeculations could help generating extra cardiac output. This knowledge might help to assess heart failure patients with dilated cardiomyopathies who often show signs of non-compaction., The research leading to these results has received funding by EU FP7 for research, technological development and demonstration under grant agreement VP2HF (no. 611823), Spanish Ministry of Economy and Competitiveness (grant TIN2011-28067, TIN2014-52923-R, the Maria de Maeztu Units of Excellence Programme MDM-2015-0502) and FEDER. B. Paun is supported by the grant FI-DGR 2014 (2014 FI B01238) from the Generalitat de Catalunya. C. Butakoff is supported by a grant from the Fundació La Marató de TV3 (nº 20154031), Spain.
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Alya: Multiphysics engineering simulation toward exascale

  • Vázquez, Mariano
  • Houzeaux, Guillaume
  • Koric, Seid
  • Artigues, Antoni
  • Aguado-Sierra, Jazmin
  • Arís, Ruth
  • Mira Martínez, Daniel
  • Calmet, Hadrien
  • Cucchietti, Fernando
  • Owen, Herbert
  • Taha, Ahmed
  • Burness, Evan D.
  • Cela, José M.
  • Valero Cortés, Mateo
Alya is a multi-physics simulation code developed at Barcelona Supercomputing Center (BSC). From its inception Alya code is designed using advanced High Performance Computing programming techniques to solve coupled problems on supercomputers efficiently. The target domain is engineering, with all its particular features: complex geometries and unstructured meshes, coupled multi-physics with exotic coupling schemes and physical models, ill-posed problems, flexibility needs for rapidly including new models, etc. Since its beginnings in 2004, Alya has scaled well in an increasing number of processors when solving single-physics problems such as fluid mechanics, solid mechanics, acoustics, etc. Over time, we have made a concerted effort to maintain and even improve scalability for multi-physics problems. This poses challenges on multiple fronts, including: numerical models, parallel implementation, physical coupling models, algorithms and solution schemes, meshing process, etc. In this paper, we introduce Alya's main features and focus particularly on its solvers. We present Alya's performance up to 100.000 processors in Blue Waters, the NCSA supercomputer with selected multi-physics tests that are representative of the engineering world. The tests are incompressible flow in a human respiratory system, low Mach combustion problem in a kiln furnace, and coupled electro-mechanical contraction of the heart. We show scalability plots for all cases and discuss all aspects of such simulations, including solver convergence., The authors would like to thank the following fellow researchers and institutions: • The Private Sector Program at NCSA and the BlueWaters sustained-petascale computing project-supported by the National Science Foundation (award number OCI 07-25070) and the state of Illinois. • Denis Doorly and Alister Bates (Imperial College London, UK), collaborators of the airways study. Part of this work was financed by European PRACE Type B/C projects. • The heart geometry was provided by Dr. A. Berruezo (Hospital Clinic de Barcelona) in collaboration with R. Sebastian (UVEG) and O. Camara (UPF), partially financed through project TIN2011-28067 from MINECO, Spain. • Part of the cardiac model development was financed by the grant SEV-2011-00067 of Severo Ochoa Program, awarded by the Spanish Government. • Part of the kiln model development was financed by the European Commission in the framework of the FP7 Collaborative project “Advanced Technologies for the Production of Cement and Clean Aggregates from Construction and Demolition Waste (C2CA)”, Grant Agreement No 265189., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Quantitative analysis of electro-anatomical maps: application to an experimental model of left bundle branch block/cardiac resynchronization therapy

  • Soto-Iglesias, David
  • Duchateau, Nicolas
  • Butakoff, Constantine
  • Andreu Martínez, David
  • Fernández-Armenta, Juan
  • Bijnens, Bart
  • Berruezo Sánchez, Antonio
  • Sitges, Marta
  • Camara, Oscar
Electro-anatomical maps (EAMs) are commonly acquired in clinical routine for guiding ablation therapies. They provide voltage and activation time information on a 3-D anatomical mesh representation, making them useful for analyzing the electrical activation patterns in specific pathologies. However, the variability between the different acquisitions and anatomies hampers the comparison between different maps. This paper presents two contributions for the analysis of electrical patterns in EAM data from biventricular surfaces of cardiac chambers. The first contribution is an integrated automatic 2-D disk representation (2-D bull's eye plot) of the left ventricle (LV) and right ventricle (RV) obtained with a quasi-conformal mapping from the 3-D EAM meshes, that allows an analysis of cardiac resynchronization therapy (CRT) lead positioning, interpretation of global (total activation time), and local indices (local activation time (LAT), surrogates of conduction velocity, inter-ventricular, and transmural delays) that characterize changes in the electrical activation pattern. The second contribution is a set of indices derived from the electrical activation: speed maps, computed from LAT values, to study the electrical wave propagation, and histograms of isochrones to analyze regional electrical heterogeneities in the ventricles. We have applied the proposed methods to look for the underlying physiological mechanisms of left bundle branch block (LBBB) and CRT, with the goal of optimizing the therapy by improving CRT response. To better illustrate the benefits of the proposed tools, we created a set of synthetically generated and fully controlled activation patterns, where the proposed representation and indices were validated. Then, the proposed analysis tools are used to analyze EAM data from an experimental swine model of induced LBBB with an implanted CRT device. We have analyzed and compared the electrical activation patterns at baseline, LBBB, and CRT stages in four animals: two without any structural disease and two with an induced infarction. By relating the CRT lead location with electrical dyssynchrony, we evaluated current hypotheses about lead placement in CRT and showed that optimal pacing sites should target the RV lead close to the apex and the LV one distant from it., This study was partially funded by the Spanish Ministry of Science and Innovation (TIN2011-28067), the Spanish Industrial and Technological Development Center (cvREMOD-CEN-20091044), the Seventh Framework Programme (FP7/2007-2013) for research, technological and demonstration under grant agreement VP2HF (nº 611823), and the Spanish Ministry of Economy and Competitiveness under the Maria de Maeztu Units of Excellence Programme (MDM-2015-0502).
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Standardized unfold mapping: a technique to permit left atrial regional data display and analysis

  • Williams, Steven E.
  • Tobón Gómez, Catalina, 1981-
  • Zuluaga, Maria A.
  • Chubb, Henry
  • Butakoff, Constantine
  • Karim, Rashed
  • Ahmed, Elena
  • Camara, Oscar
  • Rhode, Kawal
Purpose: Left atrial arrhythmia substrate assessment can involve multiple imaging and electrical modalities, but visual analysis of data on 3D surfaces is time-consuming and suffers from limited reproducibility. Unfold maps (e.g., the left ventricular bull’s eye plot) allow 2D visualization, facilitate multimodal data representation, and provide a common reference space for inter-subject comparison. The aim of this work is to develop a method for automatic representation of multimodal information on a left atrial standardized unfold map (LA-SUM). Methods: The LA-SUM technique was developed and validated using 18 electroanatomic mapping (EAM) LA geometries before being applied to ten cardiac magnetic resonance/EAM paired geometries. The LA-SUM was defined as an unfold template of an average LA mesh, and registration of clinical data to this mesh facilitated creation of new LA-SUMs by surface parameterization. Results: The LA-SUM represents 24 LA regions on a flattened surface. Intra-observer variability of LA-SUMs for both EAM and CMR datasets was minimal; root-mean square difference of 0.008 ± 0.010 and 0.007 ± 0.005 ms (local activation time maps), 0.068 ± 0.063 gs (force-time integral maps), and 0.031 ± 0.026 (CMR LGE signal intensity maps). Following validation, LA-SUMs were used for automatic quantification of post-ablation scar formation using CMR imaging, demonstrating a weak but significant relationship between ablation force-time integral and scar coverage (R 2 = 0.18, P < 0.0001). Conclusions: The proposed LA-SUM displays an integrated unfold map for multimodal information. The method is applicable to any LA surface, including those derived from imaging and EAM systems. The LA-SUM would facilitate standardization of future research studies involving segmental analysis of the LA., This work was supported by the National Institute for Health Research (NIHR) Biomedical Research Centre at Guy’s and St Thomas’ NHS Foundation Trust and King’s College London. The views expressed here are those of the authors and not necessarily those of the NHS, the NIHR, or the Department of Health. M.A. Zuluaga is funded by the EPSRC (EP/H046410/1). C. Butakoff and O. Camara are funded by the Seventh Framework Programme (FP7/2007-2013) under grant agreement n° 611823 and by the Spanish Ministry of Economy and Competitiveness (TIN2011-28067).