Pasar al contenido principal

MATERIALES HIBRIDOS MULTIFUNCIONALES BASADOS EN NANO-UNIDADES ESTRUCTURALES ACTIVAS

MAT2017-82288-C2-1-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 103
Encontrada(s) 2 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

One-Step Chemo-, Regio- and Stereoselective Reduction of Ketosteroids to Hydroxysteroids over Zr-Containing MOF-808 Metal-Organic Frameworks

  • Mautschke, H.-H.
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Zr-containing MOF-808 is a very promising heterogeneous catalyst for the selective reduction of ketosteroids to the corresponding hydroxysteroids through a Meerwein-Ponndorf-Verley (MPV) reaction. Interestingly, the process leads to the diastereoselective synthesis of elusive 17 alpha-hydroxy derivatives in one step, whereas most chemical and biological transformations produce the 17 beta-OH compounds, or they require several additional steps to convert 17 beta-OH into 17 alpha-OH by inverting the configuration of the 17 center. Moreover, MOF-808 is found to be stable and reusable; it is also chemoselective (only keto groups are reduced, even in the presence of other reducible groups such as C=C bonds) and regioselective (in 3,17-diketosteroids only the keto group in position 17 is reduced, while the 3-keto group remains almost intact). The kinetic rate constant and thermodynamic parameters of estrone reduction to estradiol have been obtained by a detailed temperature-dependent kinetic analysis. The results evidence a major contribution of the entropic term, thus suggesting that the diastereoselectivity of the process is controlled by the confinement of the reaction inside the MOF cavities, where the Zr4+ active sites are located., Financial support by the Spanish Government is acknowledged through projects MAT2017-82288-C2-1-P and the Severo Ochoa program (SEV-2016-0683). The Microscopy Service of the Universitat Politecnica de Valencia is gratefully acknowledged for the electron microscopy images.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic oxidation of organic sulfides by H2O2 in the presence of titanosilicate zeolites

  • Radko, Marcelina
  • Rutkowska, Malgorzata
  • Kowalczyk, Andrzej
  • Mikrut, Pawel
  • Swies, Aneta
  • Macyk, Wojciech
  • Chmielarz, Lucjan
  • Díaz, Urbano|||0000-0003-1472-8724
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Titanosilicate ferrierite zeolite (FER) and its delaminated form (ITQ-6), with various Si/Ti molar ratios, were synthetized and tested as catalysts for diphenyl sulfide (Ph2S) and dimethyl sulfide (DMS) oxidation with H2O2. The zeolites were characterized with respect to their chemical composition (ICP-OES), structure (XRD, UV-vis DRS) and texture (low-temperature N-2 adsorption-desorption). Titanium in the FER and ITQ-6 samples was present mainly in the zeolite framework with a significant contribution of titanium in the extraframework positions. Titanosilicate zeolites of FER and ITQ-6 series were found to be active catalysts of diphenyl and dimethyl sulfides oxidation by H2O2 to sulfoxides (Ph2SO/DMSO) and sulfones (Ph2SO2/DMSO2). The efficiency of these reactions depends on the porous structure of the zeolite catalysts - conversion of larger molecules of diphenyl sulfide was significantly higher in the presence of delaminated zeolite Ti-ITQ-6 due to the possibility of the interlayer mesopores penetration by reactants. On the other side diphenyl sulfide molecules are too large to be accommodated into micropores of FER zeolite. The efficiency of dimethyl sulfide conversion, due to relatively small size of this molecule, was similar in the presence of Ti-FER and Ti-ITQ-6 zeolites. For all catalysts, the organic sulfide conversion was significantly intensified under UV irradiation. It was suggested that Ti cations in the zeolite framework, as well as in the extraframework, species play a role of the single site photocatalysts active in the formation of hydroxyl radicals, which are known to be effective oxidants of the organic sulfides., The studies were carried out in the frame of project 2016/21/B/ST5/00242 from the National Science Centre (Poland). Part of the research was done with equipment purchased in the frame of European Regional Development Fund (Polish Innovation Economy Operational Program -contract no. POIG.02.01.00-12-023/08). U.D. acknowledges to the Spanish Government by the funding (MAT2017-82288-C2-1-P). The work was partially supported by the Foundation for Polish Science (FNP) within the TEAM project (POIR.04.04.00-00-3D74/16).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sub-nanometer Copper Clusters as Alternative Catalysts for the Selective Oxidation of Methane to Methanol with Molecular O2

  • Gallego-Rodríguez, Mario
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
[EN] The partial oxidation of methane to methanol with molecular O2 at mild reaction conditions is a challenging process, which is efficiently catalyzed in nature by enzymes. As an alternative to the extensively studied Cu-exchanged zeolites, small copper clusters composed by just a few atoms appear as potential specific catalysts for this transformation. Following previous work in our group that established that the reactivity of oxygen atoms adsorbed on copper clusters is closely linked to cluster size and morphology, we explore by means of DFT calculations the ability of bidimensional (2D) and three-dimensional (3D) Cu5 and Cu7 clusters to oxidize partially methane to methanol. A highly selective Eley¿Rideal pathway involving homolytic C¿H bond dissociation and a non-adsorbed radical-like methyl intermediate is favored when bicoordinated oxygen atoms, preferentially stabilized at the edges of 2D clusters, are available. Cluster morphology arises as a key parameter determining the nature and reactivity of adsorbed oxygen atoms, opening the possibility to design efficient catalysts for partial methane oxidation based on copper clusters, This work has been supported by the Spanish government through the "Severo Ochoa Program" (SEV-2016-0683) , MAT2017-82288-C2-1-P (AEI/FEDER, UE) , and MCIN PID2020-112590GB-C21. The computations were performed on the Tirant III cluster of the Servei d'Informàtica of the University of Valencia. M.G. thanks the Spanish MCIN for his fellowship PRE2018-083547.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Zr-Containing UiO-66 Metal-Organic Frameworks as Highly Selective Heterogeneous Acid Catalysts for the Direct Ketalization of Levulinic Acid

  • Rapeyko, Anastasia|||0000-0002-8309-3702
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
  • Rodenas, Miguel
[EN] Zr-containing UiO-66 materials are active and reusable heterogeneous catalysts for the selective ketalization of levulinic acid (LA) with 1,2-propanediol, affording selectivities of up to 91-93% at full LA conversion, with very low levels of ester or ketal-ester byproducts. This allows the preparation of the target ketal directly from LA and avoiding intermediate esterification steps of LA to levulinate esters to minimize the formation of unwanted side products. The catalytic activity of UiO-66 is found to depend critically on the hydration degree of the solid and the amount of missing linker defects. The most likely active sites for ketalization in (defective) UiO-66 are Bronsted-induced acid sites arising from the strong coordination and polarization of H2O molecules onto accessible Zr4+ associated with missing linker defects. A progressive deactivation is observed upon catalytic reuse, which is attributed to adsorbed reaction products poisoning the catalytic sites. These adsorbed products are easily removed by washing the spent catalyst with a dilute 2% HCl ethanolic solution, which completely restores the initial catalytic activity while maintaining the crystallinity of the solid intact., The authors are grateful for grant PID2020-112590GB-C21 funded by MCIN/AEI/10.13039/501100011033 and Grant MAT2017-82288-C2-1-P funded by MCIN/AEI and ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tailoring Lewis/Bronsted acid properties of MOF nodes via hydrothermal and solvothermal synthesis: simple approach with exceptional catalytic implications

  • Rojas-Buzo, Sergio
  • Bohigues, Benjamin
  • Lopes, Christian W.
  • Meira, Débora M.
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The Lewis/Bronsted catalytic properties of the Metal-Organic Framework (MOF) nodes can be tuned by simply controlling the solvent employed in the synthetic procedure. In this work, we demonstrate that Hf-MOF-808 can be prepared from a material with a higher amount of Bronsted acid sites, via modulated hydrothermal synthesis, to a material with a higher proportion of unsaturated Hf Lewis acid sites, via modulated solvothermal synthesis. The Lewis/Bronsted acid properties of the resultant metallic clusters have been studied by different characterization techniques, including XAS, FTIR and NMR spectroscopies, combined with a DFT study. The different nature of the Hf-MOF-808 materials allows their application as selective catalysts in different target reactions requiring Lewis, Bronsted or Lewis-Bronsted acid pairs., This work has been supported by the Spanish Government through the "Severo Ochoa" (SEV-2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE) and RTI2018-101033-B-I00 (MCIU/AEI/FEDER, UE). J. M. Salas is acknowledged for his contribution to CD<INF>3</INF>CN-FTIR experiments. C. W. L. thanks the PRH 50.1 - ANP/FINEP Human Resources Program for the Visiting Researcher Fellowship. This research used resources of the Advanced Photon Source, a user facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory, and was supported by the U.S. DOE under Contract No. DE-AC02-06CH11357 and by the Canadian Light Source and its funding partners. The Electron Microscopy Service of the UPV is also acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Visible-Light-Driven Photocatalytic Coupling of Benzylamine over Titanium-Based MIL-125-NH2 Metal-Organic Framework: A Mechanistic Study

  • Vitillo, Jenny G.
  • Presti, Davide
  • Luz, Ignacio
  • Bordiga, Silvia
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Imines are important building blocks in organic chemistry. Titanium-based metal-organic framework (MOF) MIL-125-NH2(Ti) can photocatalyze, under visible light and at room temperature, the selective aerobic oxidation of benzylamine to N-benzylidenebenzylamine. We investigated the reaction mechanism using catalytic tests, ex situ infrared spectroscopy, and density functional calculations. In the dark, the presence of MIL-125-NH2(Ti) alone does not improve the reaction yield with respect to a blank experiment. This poor catalytic performance in the dark is associated with the absence of polarizing species on the MOF surface, as confirmed by acetonitrile adsorption. Excitation with different spectral regions evidenced the determinant role of the 450 < lambda < 385 nm range for catalyst photoactivation. The calculations show that the last step of the reaction would have an energy barrier of 206 kJ mol(-1) in anhydrous conditions, while it decreases to 88 kJ mol(-1) only if the mechanism is mediated by two water molecules., Financial support by the Spanish Government is acknowledged through projects MAT2017-82288-C2-1-P and the Severo Ochoa program (SEV-2016-0683). We further thank Bartolomeo Civalleri for the kind help with the calculations and Diego Pellerej for experimental assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of iron aggregation on the catalytic performance of desilicated MFI in the DeNO(x) process

  • Rutkowska, M.
  • Borcuch, A.
  • Marzec, A.
  • Kowalczyk, A.
  • Samojeden, B.
  • Moreno, J.M.
  • Chmielarz, L.
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] In the present study, an influence of the iron aggregation in conventional and micro-mesoporous MFI on their catalytic activity in the NO reduction with ammonia (DeNO(x) process) was studied. Modification of MFI zeolite properties was done by the desilication in the presence of NaOH and TPAOH (tertapropylammonium hydroxide). In the next step, the samples were modified with iron by ion-exchange with the use of a conventional solution of Fe cations (FeSO4) and a solution of iron triple-metallic aggregates (oligocations) ([Fe-3(OAc)(6)O(H2O)(3)](+)). Both of the applied modification techniques (desilication and modification with Fe-3 oligocations) increased the catalytic activity of the MFI zeolite in the DeNO(x) process. This increased catalytic activity was connected with changes in sample porosity, Si/Al ratio, topology, as well as aggregation and dispersion of iron species on the catalyst surface, which was investigated by N-2-sorption, XRD, ICP, NMR, HRTEM and UV-vis-DRS techniques., This work was carried out in the frame of project No. 0670/IP3/2016/74 from the Polish Ministry of Science and Higher Education in the years 2016-2019 and in the frame of project No. 2012/05/B/ST5/00269 from the National Science Centre (Poland). U. D. acknowledges to the Spanish Government by the funding (MAT2017-82288-C2-1-P).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ferrierite and Its Delaminated Forms Modified with Copper as Effective Catalysts for NH3-SCO Process

  • Swies, Aneta
  • Rutkowska, Malgorzata
  • Kowalczyk, Andrzej
  • Chmielarz, Lucjan
  • Díaz, Urbano|||0000-0003-1472-8724
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Ferrierites and their delaminated forms (ITQ-6), containing aluminum or titanium in the zeolite framework, were synthetized and modified with copper by an ion-exchange method. The obtained samples were characterized with respect to their chemical composition (ICP-OES), structure (XRD, UV-Vis DRS), textural parameters (N-2-sorption), surface acidity (NH3-TPD), form and reducibility of deposited copper species (UV-Vis DRS and H-2-TPR). Ferrierites and delaminated ITQ-6 zeolites modified with copper were studied as catalysts for the selective catalytic oxidation of ammonia to dinitrogen (NH3-SCO). It was shown that aggregated copper oxide species, which were preferentially formed on Ti-zeolites, were catalytically active in direct low-temperature ammonia oxidation to NO, while copper introduced into Al-zeolites was present mainly in the form of monomeric copper cations catalytically active in selective reduction of NO by ammonia to dinitrogen. It was postulated that ammonia oxidation in the presence of the studied catalysts proceeds according to the internal-selective catalytic reduction mechanism (i-SCR) and therefore the suitable ratio between aggregated copper oxide species and monomeric copper cations is necessary to obtain active and selective catalysts for the NH3-SCO process. Cu/Al-ITQ-6 presented the best catalytic properties possibly due to the most optimal ratio of these copper species., The studies financed by National Science Centre-Poland [2016/21/B/ST5/00242]. A.. has been partly supported by the EU Project POWR.03.02.00-00-I004/16. U.D. acknowledges the Spanish Government for the funding [MAT2017-82288-C2-1-P]. Part of the research was done with equipment purchased in the frame of European Regional Development Fund (Polish Innovation Economy Operational Program (POIG.02.01.00-12-023/08)).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Readily available Ti-beta as an efficient catalyst for greener and sustainable production of campholenic aldehyde

  • Puche Panadero, Marta|||0000-0002-9390-5532
  • Velty, Alexandra|||0000-0002-8263-4570
[EN] Different Ti-beta zeolite samples were prepared following a convenient and optimized post-synthetic route and starting from commercial Al-beta zeolite. Lewis acid sites have been successfully incorporated into vacant tetrahedral (T)-sites of a dealuminated beta-framework by ball-milling solid-state ion-exchange. A tribology-ball milling process was used in order to increase the interaction between dealuminated-beta zeolite and the Ti-precursor. Thermal treatments with water and aqueous solution of NaNO or Li NO allowed optimization of the catalytic properties of the Ti-Lewis active sites which exhibited excellent catalytic activity and stability for the isomerization of ¿-pinene oxide into campholenic aldehyde in both batch and fixed bed reactor systems. Additionally, the catalytic performance of the post-synthesised Ti-beta zeolite was compared to a Ti-beta zeolite prepared in fluoride media. From different points of view such as preparation of readily, highly active, selective and stable catalysts, throughput, sustainability and cost, herein we report the selective solid catalysed ¿-PO isomerization with excellent results, 88% selectivity and yield, a CA production of 225 g g h and new opportunities., The authors are grateful for financial support from the Spanish Government by MAT2017-82288-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. The contribution of Mr. Pablo Ramos to the experimental work is also gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selective ammonia oxidation over ZSM-5 zeolite: Impact of catalyst&apos, s support porosity and type of deposited iron species

  • Borcuch, A.
  • Rutkowska, M.
  • Marzec, A.
  • Kowalczyk, A.
  • Michalik, M.
  • Moreno, J.M.
  • Chmielarz, L.
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] In the presented studies an influence of different parameters, such as zeolite sample porosity, form of used iron source ([Fe-3(OAc)(6)O(H2O)(3)](+)oligocations or FeSO4 solutions) and method of iron species deposition (ion-exchange, impregnation), on the catalytic activity in the process of the selective catalytic oxidation of ammonia (NH3-SCO) was studied. Conventional and mesoporous ZSM-5 zeolites, obtained by desilication and modified with iron species, were analysed with respect to their textural, surface and crystalline properties (N-2-sorption, HRTEM, SEM, XRD) as well as the form of introduced Fe species (UV-vis-DRS). Ion-exchange with [Fe-3(OAc)(6)O (H2O)(3)](+) oligocations and impregnation with these oligocations and FeSO4 solutions were found as the most effective methods of the zeolite samples activation for NH3-SCO., This work was carried out in the frame of project No. 0670/IP3/2016/74 from the Polish Ministry of Science and Higher Education in the years 2016-2019. Part of the work was performed in the frame of project No. 2012/05/B/ST5/00269from the National Science Centre (Poland). U. D. acknowledges to the Spanish Government by the funding (MAT2017-82288-C2-1-P). The authors would like to acknowledge to Clariant Company for the providing of the HMFI zeolite material for the presented research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ferrierite and Its Delaminated and Silica-Intercalated Forms Modified with Copper as Effective Catalysts for NH3-SCR Process

  • Swies, Aneta
  • Kowalczyk, Andrzej
  • Rutkowska, Malgorzata
  • Chmielarz, Lucjan
  • Díaz, Urbano|||0000-0003-1472-8724
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] The main goal of the study was the development of effective catalysts for the low-temperature selective catalytic reduction of NO with ammonia (NH3-SCR), based on ferrierite (FER) and its delaminated (ITQ-6) and silica-intercalated (ITQ-36) forms modified with copper. The copper exchange zeolitic samples, with the intended framework Si/Al ratio of 30 and 50, were synthetized and characterized with respect to their chemical composition (ICP-OES), structure (XRD), texture (low-temperature N(2)adsorption), form and aggregation of deposited copper species (UV-vis-DRS), surface acidity (NH3-TPD) and reducibility (H-2-TPR). The samples of the Cu-ITQ-6 and Cu-ITQ-36 series were found to be significantly more active NH3-SCR catalysts compared to Cu-FER. The activity of these catalysts in low-temperature NH3-SCR was assigned to the significant contribution of highly dispersed copper species (monomeric cations and small oligomeric species) catalytically active in the oxidation of NO to NO(2,)which is necessary for fast-SCR. The zeolitic catalysts, with the higher framework alumina content, were more effective in high-temperature NH3-SCR due to their limited catalytic activity in the side reaction of ammonia oxidation., This work was supported by the National Science Centre-Poland [2016/21/B/ST5/00242].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Limits of the Confinement Effect Associated to Cage Topology on the Control of the MTO Selectivity

  • Ferri-Vicedo, Pau
  • Li, Chengeng
  • Rodríguez-Fernández, Aida
  • Paris, Cecilia|||0000-0002-5673-8114
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The light olefin product distribution of the methanol-to-olefin (MTO) reaction catalyzed by acid zeolites and zeotypes depends on the nature of the entrapped hydrocarbon pool species that act as co-catalysts. The preferential stabilization by confinement effects of the cationic intermediates involved in the side-chain or paring pathways of the aromatics-based cycle of the MTO mechanism in small-pore cage-based zeolites is determined by the topology of the cavity, and can be quantitatively described through the E-int(7/5) parameter obtained from DFT calculations. In this work we extend the study of the E-int(7/5) parameter to a wide range of structures (ERI, LEV, AEI, CHA, DDR, AFX, RTH, ITE, SAV, UFI, RHO, KFI, and LTA) and discuss its applicability in small cages with steric constraints to host bulky intermediates, in zeolites with a tight fitting between the cavity and the hosted cations, and in large cages where confinement effects are lost in part and competitive processes occur., This work has been supported by the European Union through ERC-AdG-2014-671093 (SynCatMatch), Spanish Government through ''Severo Ochoa" (SEV-2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE) and RTI2018-101033-B-I00 (MCIU/AEI/FEDER, UE), and by Generalitat Valenciana through AICO/2019/060. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. Red Espanola de Supercomputacion (RES) and Servei d'Informatica de la Universitat de Valencia (SIUV) are acknowledged for computational resources and technical support. P.F. and C.L. thank ITQ for their contracts. A.R.F. acknowledges the Spanish Government-MINECO for a FPU scholarship (FPU2017/01521).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Production of aromatics from biomass by computer-aided selection of the zeolite catalyst

  • Margarit Benavent, Vicente Juan
  • Gallego, Eva M.
  • Paris, Cecilia|||0000-0002-5673-8114
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Taking into account that the transformation of biomass-derived 2,5-dimethylfuran (DMF) top-xylene involves Diels-Alder (DA) cycloaddition as the limiting step, the use of an ITQ-2 zeolite obtained by direct synthesis (DS-ITQ-2) as a catalyst for this reaction is proposed based on the fact that the organic molecule employed for its synthesis mimics the size and shape of the DA oxanorbornene cycloadduct intermediate. Periodic Density Functional Theory (DFT) calculations reveal a better stabilization of the oxanorbornene intermediate within the external hemicavities or "cups" of the DS-ITQ-2 zeolite (MWW-framework) than in other zeolites employed for this reaction, such as FAU and Beta. Interestingly, experimental results also show improved catalytic conversion values for the DS-ITQ-2 zeolite compared to FAU and Beta, in good agreement with the stabilization energies calculated by DFT. The "ab initio" catalyst design presented here to enhance the catalytic performance for the transformation of biomass-derived products is a valuable example that could be employed for the rationalization of other chemical processes catalyzed by zeolites., This work has been supported by the European Union through ERC-AdG-2014-671093 (SynCatMatch) and by Spanish Government through "Severo Ochoa" (SEV-2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE) and RTI2018-101033-B-I00 (MCIU/AEI/FEDER, UE). E. M. G. acknowledges "La Caixa - Severo Ochoa" International PhD Fellowships (call 2015). Elisa Garcia is acknowledged for her technical assistance in this work. The Electron Microscopy Service of the UPV is also acknowledged for their help in sample characterization. We appreciate the support of ExxonMobil Research and Engineering for their help with our efforts in fundamental catalytic research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Porous Silica-Based Organic-Inorganic Hybrid Catalysts: A Review

  • Erigoni, Andrea
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] Hybrid organic-inorganic catalysts have been extensively investigated by several research groups in the last decades, as they allow combining the structural robust-ness of inorganic solids with the versatility of organic chemistry. Within the field of hybrid catalysts, synthetic strategies based on silica are among the most exploitable, due to the convenience of sol-gel chemistry, to the array of silyl-derivative precursors that can be synthesized and to the number of post-synthetic functionalization strategies available, amongst others. This review proposes to highlight these advantages, firstly describing the most common synthetic tools and the chemistry behind sol-gel syntheses of hybrid catalysts, then presenting exemplificative studies involving mono- and multi-functional silica-based hybrid catalysts featuring different types of active sites (acid, base, redox). Materials obtained through different approaches are described and their properties, as well as their catalytic performances, are compared. The general scope of this review is to gather useful information for those approaching the synthesis of organic-inorganic hybrid materials, while providing an overview on the state-of-the art in the synthesis of such materials and highlighting their capacities., This research was funded by Spanish Government (MAT2017-82288-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683) and MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mesoporous Beta zeolite functionalisation with FexCry oligocations, catalytic activity in the NH3-SCO process

  • Rutkowska, M.
  • Duda, M.
  • Macina, D.
  • Górecka, S.
  • Debek, R.
  • Moreno-Rodríguez, José María
  • Chmielarz, L.
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] In the presented study, H-Beta zeolite and H-Beta/meso (mesoporous Beta zeolite obtained by a mesotemplate-free method) were modified with Fe-3, Fe2Cr, FeCr2 and Cr-3 triple-metallic aggregates (oligocations) by ion-exchange method (for comparison modification with isolated Fe cations was also done). Successful synthesis of mesoporous Beta zeolite was confirmed by several techniques such as N-2-sorption, PXRD, AAS or NH3-TPD. Modified porosity and acidity of the Beta zeolite, as well as the source of metals used, influenced the form (coordination and aggregation), content and reducibility of Fe- and Cr-species in the samples (UV-vis-DRS, AAS, H-2-TPR). The obtained samples were tested as catalysts in the process of selective catalytic oxidation of ammonia to dinitrogen (NH3-SCO). The highest activity and selectivity for nitrogen was obtained for the bimetallic Fe-Cr samples prepared by deposition of suitable oligocations., This work was carried out in the frame of project No. 0670/IP3/2016/74 from the Polish Ministry of Science and Higher Education in the years 2016-2019 and in the frame of project No. 2012/05/B/ST5/00269 from the National Science Centre (Poland). U. D. acknowledges to the Spanish Government for funding (MAT2017-82288-C2-1-P).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

How does the Surface of Al-ITQ-HB 2D-MOF Condition the Intermolecular Interactions of an Adsorbed Organic Molecule?

  • Caballero-Mancebo, Elena
  • Moreno Rodríguez, José María
  • Cohen, Boiko
  • Douhal, Abderrazzak
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] In this work, we unravel how the two-dimensional Al-ITQ-4-heptylbenzoic acid (HB) metal-organic framework (MOF) changes the interactions of Nile red (NR) adsorbed on its surface. Time-resolved emission experiments indicate the occurrence of energy transfer between adsorbed NR molecules, in abnormally long time constant of 2-2.5 ns, which gets shorter (similar to 0.25 ns) when the concentration of the surface-adsorbed NR increases. We identify the emission from local excited state of aggregates and charge transfer and energy transfer between adsorbed molecules. Femtosecond emission studies reveal an ultrafast process (similar to 425 fs) in the NR@Al-ITQHB composites, assigned to an intramolecular charge transfer in NR molecules. A comparison of the observed photobehavior with that of NR/SiO2 and NR/Al2O3 composites suggests that the occurrence of energy transfer in the NR@MOF complexes is a result of specific and nonspecific interactions, reflecting the different surface properties of Al-ITQ : HB that are of relevance to the reported high catalytic activity. Our results provide new knowledge for further researches on other composites with the aim to improve understanding of photocatalytic and photonic processes within MOFs., This work was supported by MINECO and JCCM through projects MAT2017-82288-C2-1-P, MAT2014-57646-P, and PEII-2014-003-P. J.M.M. thanks the predoctoral fellowship from the Severo Ochoa program for support (SEV-2016-0683), and E.C.-M. thanks the MINECO for the FPI fellowship
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

In-Situ-Generated Active Hf-hydride in Zeolites for the Tandem N-Alkylation of Amines with Benzyl Alcohol

  • Rojas-Buzo, Sergio
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
[EN] In this work, we have studied the catalytic activity of different silicates (MFI, MCM-41, and Beta) containing Lewis acid sites (including Sn, Ti, Zr, and Hf) for the tandem N-alkylation reaction of aniline with benzyl alcohol. The Hf- and Zr-Beta were the most active catalysts for this transformation, showing in both cases selectivities toward the corresponding N-benzylaniline higher than 97%. FTIR and DFT analyses confirm that the active sites in the Hf-Beta catalyst for this process are the open sites where one of the four Hf-O bonds is hydrolyzed. Moreover, the amount of these active species could be notoriously increased with previous thermal treatment of the Lewis acid zeolite with benzyl alcohol. Isotopically labeled experiments and theoretical mechanistic studies reveal that the N-alkylation reaction occurs through a hydrogen borrowing pathway, in which in situ Hf-hydride species were generated. Finally, the Hf-Beta zeolite was reused several times in the N-alkylation reaction without any appreciable deactivation detected. This catalytic system could be expanded to a variety of amines, including aliphatic and biomass-derived amines., This work has been supported by the Spanish Government through "severo Ochoa" (SEV-2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE), and RTI2018101033-B-I00 (MCIU/AEI/FEDER, UE). Dr. Susana Valencia is acknowledged for the preparation of the Ti-Beta sample. The Electron Microscopy Service of the UPV is also acknowledged for their help in sample characterization. Part of the computations were performed on the Tirant III cluster of the Servei d'Informa`tica of the University of Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selective active site placement in Lewis acid zeolites and implications for catalysis of oxygenated compounds

  • Rodríguez-Fernández, Aida
  • Di Iorio, John R.
  • Román-Leshkov, Yuriy
  • Paris, Cecilia|||0000-0002-5673-8114
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Moliner Marin, Manuel|||0000-0002-5440-716X
[EN] The selective incorporation of isolated framework Lewis acid sites at specific crystallographic positions in high-silica zeolites was achieved by applying a rationalized post-synthetic grafting methodology. The removal of framework Ge atoms from a Ge-BEC zeolite with low concentrations of Ge in the framework (Si/Ge similar to 150) followed by grafting allows the synthesis of Sn-BEC zeolites with Sn atoms positionally biased into the double-4-ring (D4R) crystallographic positions of the BEC framework. Spectroscopic characterization using solid-state nuclear magnetic resonance (NMR) coupled with theoretical calculations revealed that Sn atoms preferentially form open Sn sites in the D4R of Sn-BEC. This observation was supported by IR spectra of adsorbed deuterated acetonitrile (CD3CN), a known titrant of Sn sites in zeolites. The catalytic implications of selective incorporation of open Sn sites in Sn-BEC were probed using the Meerwein-Ponndorf-Verley-Oppenauer (MPVO) reaction. Although the MPVO turnover rates normalized by the total number of open Sn sites were comparable on Sn-BEC and a conventional Sn-Beta catalyst synthesized in fluoride media (Sn-Beta(F)), Sn-BEC demonstrated higher per gram reaction rates because of its larger fraction of open sites compared to Sn-Beta(F). These results highlight the advantage of placing active sites in targeted locations within a zeolite structure. The methodology presented here to selectively place catalytic active sitesviasacrificial heteroatoms, such as Ge, can be generalized for the design of many other tetrahedrally-coordinated metal-containing zeolites., This work has been supported by the Spanish Government-MINECO through ''Severo Ochoa" (SEV-2016-0683), MAT2017-82288-C2-1-P (AEI/FEDER, UE) and RTI2018-101033-B-I00 (MCIU/AEI/FEDER, UE), and by Generalitat Valenciana through AICO/2019/060. JRD and YR-L thank the U.S. Department of Energy, Office of Basic Energy Sciences under Award No. DE-SC0016214 for support. ARF acknowledges the Spanish Government-MINECO for a FPU scholarship (FPU2017/01521). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selective Aerobic Oxidation of Cumene to Cumene Hydroperoxide over Mono- and Bimetallic Trimesate Metal Organic Frameworks Prepared by a Facile Green Aqueous Synthesis

  • Nowacka, Anna Elzbieta
  • Briantais, P.
  • PRESTIPINO, CARMELO
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Co-Ni and Mn-Ni bimetallic trimesate MOFs prepared by a fast aqueous synthesis method are excellent and reusable catalysts for the selective aerobic oxidation of cumene to cumene hydroperoxide (CHP). Isolation of Co2+ (or Mn2+) in an inert Ni-BTC framework is a good strategy to optimize CHP selectivity above 90%: since only Co2+ sites catalyze CHP decomposition, a drop of the CHP selectivity is observed as the cobalt content in the bimetallic MOF increases. The statistical probability of having isolated Co2+ sites is calculated as a function of the total cobalt content of the bimetallic compound, assuming homogeneous distribution of Co2+ ions in the Ni-BTC framework and preferential occupation of terminal sites. Thus, in our best sample, with a Co:Ni ratio of 5:95, 73% of the total Co2+ ions are isolated so that CHP decomposition/overoxidation processes at the surface of the catalyst are not likely to occur before CHP desorption. This can explain the excellent CHP selectivity (91%) attained over this material. This "site isolation" effect is further supported by similar findings on Mn-Ni bimetallic compounds., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 641887 (project acronym: DEFNET) and the Spanish Government through projects MAT2017-82288-C2-1-P and Severo Ochoa (SEV-2016-0683).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Expandable Layered Hybrid Materials Based on Individual 1D Metalorganic Nanoribbons

  • Moreno-Rodríguez, José María
  • Velty, Alexandra|||0000-0002-8263-4570
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] Different metalorganic lamellar hybrid materials based on associated nanoribbons were synthesized by the use of alkyl-benzyl monocarboxylate spacers, containing alkyl tails with variable lengths, which acted like structural growing inhibitors. These molecular agents were perpendicularly located and coordinated to aluminium nodes in the interlayer space, controlling the separation between individual structure sub-units. The hybrid materials were studied by X-ray diffraction (XRD), chemical and thermogravimetrical analysis (TGA), nuclear magnetic resonance (NMR) and infrared spectroscopy (IR), and field emission scanning electron microscopy (FESEM)/transmission electron microscopy (TEM), showing their physicochemical properties. The specific capacity of the metalorganic materials to be exfoliated through post-synthesis treatments, using several solvents due to the presence of 1D structure sub-units and a marked hydrophobic nature, was also evidenced., The authors are grateful for financial support from the Spanish Government by MAT2017-82288-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. J. M. M. acknowledges Predoctoral Fellowships from MINECO for economical support. The authors thank the MULTY2HYCAT EU-Horizon 2020 funded project under grant agreement no.720783.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structure and reactive properties of Nb-impregnated two-dimensional pillared MWW zeolites for total oxidation of volatile organic compounds

  • Balzer, Rosana
  • Wittee Lopes, Christian
  • Motta Meira, Debora
  • Pergher, Sibele B.
  • Bernardo-Gusmao, Katia
  • Díaz, Urbano|||0000-0003-1472-8724
  • Schwanke, Anderson Joel
[EN] In this work, the structure and reactive properties of niobium (Nb)-impregnated MWW-type materials were evaluated for gas-phase total oxidation of volatile organic compounds, including BTX (benzene, toluene and o -xylene). The role of the type of structure (two or three-dimensional) and the loading of Nb were considered. The results indicated most Nb species with a tetrahedral coordination on the external surfaces of both two- and threedimensional zeolites, together with a minimal contribution of octahedral extra-framework Nb2O5 species. The texture and Nb content played a key role in the gas-phase total oxidation of BTX. With the same Nb content (5 wt %), the pillared zeolite exhibited a higher specific surface, larger pore volume and mesopores between the MWW nanosheets when compared to the MCM-22 zeolites, which resulted in high accessibility of the reactant molecules to the active sites, reflected in higher BTX conversion at lower and higher temperatures (50-300 degrees C). The best performance was achieved with the pillared zeolite (10 wt% Nb), reaching a BTX conversion at 300 degrees C of 92%, 69% and 58%, respectively. The catalyst was stable for up to 30 h of reaction., A.J.S. thanks the Cordenacao de Aperfeicoamento de Pessoal de Nivel Superior (CAPES, Brazil; Finance Code 001) and the Programa de Pos-Graduacao em Quimica of the Universidade Federal do Rio Grande do Sul (PPGQ-UFRGS) . C.W.L. thanks the PRH 50.1 - ANP/FINEP Human Resources Program for the Visiting Researcher Fellowship. This research used resources of the Advanced Photon Source, a user facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory, and was supported by the U.S. DOE under Contract No. DE-AC02-06CH11357 and by the Canadian Light Source and its funding partners. U.D thanks the MAT2017-82288-C2-1-P Project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Control of the Reaction Mechanism of Alkylaromatics Transalkylation by Means of Molecular Confinement Effects Associated to Zeolite Channel Architecture

  • Margarit Benavent, Vicente Juan
  • OSMAN, MOGAHID
  • Al-Khattaf, Sulaiman
  • Martínez, Cristina|||0000-0002-4415-084X
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Transalkylation of alkylaromatics catalyzed by acid zeolites is a process widely employed in the petrochemical industry for upgrading aromatic fractions. The reaction mechanism is complex as it can proceed either by intermolecular alkyl-transfer involving dealkylation-alkylation steps with surface alkoxy species as reaction intermediates or through the formation of bulkier diaryl intermediates. We have investigated how the possible formation of such bulky intermediates in the microporous channel system of different zeolite structures, together with their stabilization by confinement effects, can determine the preferential mechanism and, therefore, the selectivity of ethylbenzene disproportionation into benzene and diethylbenzene. For testing the concept, four zeolites, MCM-22 (3D MWW) with 1OR pores, 12R cavities and external 12R hemicavities or "cups", DS-ITQ2, (2D MWW) with the same 1OR channels as MCM-22, no 12R cavities and much larger proportion of external "cups", a 10R ZSM-5 (MFI) and a 12R mordenite (MOR) have been used. The higher activity of DS-ITQ2 and MCM-22 as compared to ZSM-5 at low temperature (573 K) and the high selectivity to diethylbenzene of the bidimensional material under all reaction conditions considered have been explained by means of DFT calculations. Contrary to what could be expected according to the available space at the external "cups" and at the lOR channels of the MWW structure, the bulkier diaryl intermediates are better stabilized within the lOR channel system than at the "cups" open at the external surface of the MWW materials. We show from this perspective how the channel structure and molecular confinement stabilization also explain the operating reaction mechanism in ZSM-5 and mordenite., This work was supported by the Spanish Government through "Severo Ochoa Program" (SEV 2012-0267; SEV-2016-0683), RTI2018-101033-B-I00 and MAT2017-82288-C2-1-P, by the Fundacion Ramon Areces through a research contract of the "Life and Materials Science" program, and by the European Union through ERC-AdG-2014-671093 (SynCatMatch). Red Espanola de Supercomputacion (RES) and Centre de Calcul de la Universitat de Valencia are gratefully acknowledged for computational resources and technical support. We thank the Electron Microscopy Service of the UPV for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MCM-22, MCM-36, and ITQ-2 Zeolites with Different Si/Al Molar Ratios as Effective Catalysts of Methanol and Ethanol Dehydration

  • Marosz, Monika
  • Samojeden, Bogdan
  • Kowalczyk, Andrzej
  • Rutkowska, Malgorzata
  • Motak, Monika
  • Chmielarz, Lucjan
  • Díaz, Urbano|||0000-0003-1472-8724
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] MCM-22, MCM-36, and ITQ-2 zeolites with the intended Si/Al molar ratios of 15, 25, and 50 were synthetized and tested as catalysts for dehydration of methanol to dimethyl ether and dehydration of ethanol to diethyl ether and ethylene. The surface concentration of acid sites was regulated by the synthesis of zeolite precursors with different aluminum content in the zeolite framework, while the influence of porous structure on the overall efficiency of alcohol conversion was analyzed by application of zeolitic materials with different types of porosity-microporous MCM-22 as well as microporous-mesoporous MCM-36 and ITQ-2. The zeolitic samples were characterized with respect to their: chemical composition (ICP-OES), structure (XRD, FT-IR), texture (N-2 sorption), and surface acidity (NH3-TPD). Comparison of the catalytic activity of the studied zeolitic catalysts with other reported catalytic systems, including zeolites with the similar Si/Al ratio as well as gamma-Al2O3 (one of the commercial catalysts for methanol dehydration), shows a great potential of MCM-22, MCM-36, and ITQ-2 in the reactions of alcohols dehydration., This research was funded by National Science Centre-Poland grant number 2016/21/B/ST5/00242. U.D. acknowledges to the Spanish Government grant number MAT2017-82288-C2-1-P. The research was partially done using the equipment purchased from the funds of European Regional Development Fund, Polish Innovation Economy Operational Program, grant numberPOIG.02.01.00-12-023/08.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of Zeolite Framework Composition and Flexibility on Methanol-To-Olefins Selectivity: Confinement or Diffusion?

  • Ferri-Vicedo, Pau
  • Li, Chengeng
  • Millán-Cabrera, Reisel|||0000-0002-4489-5411
  • Martínez-Triguero, Joaquín|||0000-0003-4590-724X
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The methanol-to-olefins reaction catalyzed by small-pore cage-based acid zeolites and zeotypes produces a mixture of short chain olefins, whose selectivity to ethene, propene and butene varies with the cavity architecture and with the framework composition. The product distribution of aluminosilicates and silicoaluminophosphates with the CHA and AEI structures (H-SSZ-13, H-SAPO-34, H-SSZ-39 and H-SAPO-18) has been experimentally determined, and the impact of acidity and framework flexibility on the stability of the key cationic intermediates involved in the mechanism and on the diffusion of the olefin products through the8rwindows of the catalysts has been evaluated by means of periodic DFT calculations and ab initio molecular dynamics simulations. The preferential stabilization by confinement of fully methylated hydrocarbon pool intermediates favoring the paring pathway is the main factor controlling the final olefin product distribution., This work has been supported by the European Union through ERC-AdG-2014-671093 (SynCatMatch), Spanish Government through "Severo Ochoa" (SEV-2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE) and RTI2018-101033-B-I00 (MCIU/AEI/FEDER, UE), and by Generalitat Valenciana through AICO/2019/060. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. Red Espanola de Supercomputacion (RES) and Servei d'Informatica de la Universitat de Valencia (SIUV) are acknowledged for computational resources and technical support. P.F. and R.M. thank ITQ for their contracts. C.L. acknowledges China Scholarship Council (CSC) for a Ph.D fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Organic-Free Synthesis of Zeolite Y with High Si/Al Ratios: Combined Strategy of In Situ Hydroxyl Radical Assistance and Post-Synthesis Treatment

  • Wang, Jianyu
  • Liu, Pusheng
  • Ferri-Vicedo, Pau
  • Xu, Zhaoguo
  • Liu, Peng
  • Shen, Baojian
  • Wang, Zhendong
  • Yu, Jihong
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
[EN] Zeolite Y, with a high SiO2/Al(2)O(3)ratio (SAR), plays an important role in fluidized catalytic cracking processes. However, in situ synthesis of zeolite Y with high SARs remains a challenge because of kinetic limitations. Here, zeolite Y with an SAR of 6.35 is synthesized by a hydroxyl radical assisted route. Density-functional theory (DFT) calculations suggest that hydroxyl radicals preferentially enhanced the formation of Si-O-Si bonds, thus leading to an increased SAR. To further increase the SAR, a dealumination process was carried out using citric acid, with a subsequent second-step hydrothermal crystallization, giving an SAR of up to 7.5 while maintaining good crystallinity and high product yield. The resultant zeolite Y shows good performance in cumene cracking. Introduced here is a new strategy for synthesizing high SAR zeolite Y, which is widely used in commercial applications., We thank the National Natural Science Foundation of China (Grant 21920102005, 21621001 and 21835002), the National Key Research and Development Program of China (Grant 2016YFB0701100), the 111 Project (B17020), and the Spanish Government-MINECO (SEV-2016-0683 and MAT2017-82288-C2-1-P (AEI/FEDER, UE)) for supporting this work. P. F. thanks ITQ for his contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Growing modulator agents for the synthesis of Al-MOF-type materials based on assembled 1D structural sub-domains

  • Moreno, José María
  • Velty, Alexandra|||0000-0002-8263-4570
  • Vidal Moya, José Alejandro
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Novel aluminium MOF-type materials structured by 1D subdomains, such as organic-inorganic nanoribbons, were synthesized by modifying the conditions of solvothermal synthesis and the nature of the solvents in the presence of aryl monocarboxylate linkers with long alkyl chains, which acted as growth-modulating agents. Specifically, three different families of materials were prepared with various morphological characteristics: (i) isoreticular MIL-53(Al)-type materials, (ii) mesoscopic metalorganic structures and (iii) lamellar aluminium MOFs. The length of the alkyl chain in the aryl linker and the hydrophobic/hydrophilic nature of the solvothermal synthesis media determined the structuration level that was achieved. The derived Al-MOFs are active and stable catalysts for the synthesis of fine chemicals. This was illustrated by the efficient synthesis of 2,3-dihydro-2,2,4-trimethyl-1H-1,5-benzodiazepine., The authors are grateful for financial support from the Spanish Government under MAT2014-52085-C2-1-P, MAT2017-82288-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. J. M. M. thanks predoctoral fellowships from MINECO for economic support. The European Union is also acknowledged for ERC-AdG-2014-671093-SynCatMatch
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Defect-Engineered Ruthenium MOFs as Versatile Heterogeneous Hydrogenation Catalysts

  • Epp, Konstantin
  • Luz, Ignacio
  • Heinz, Werner R.
  • Fischer, Roland A.
  • Rapeyko, Anastasia|||0000-0002-8309-3702
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Ruthenium MOF [Ru-3(BTC)(2)Y-y] . G(g) (BTC=benzene-1,3,5-tricarboxylate; Y=counter ions=Cl-, OH-, OAc-; G=guest molecules=HOAc, H2O) is modified via a mixed-linker approach, using mixtures of BTC and pyridine-3,5-dicarboxylate (PYDC) linkers, triggering structural defects at the distinct Ru-2 paddlewheel (PW) nodes. This defect-engineering leads to enhanced catalytic properties due to the formation of partially reduced Ru-2-nodes. Application of a hydrogen pre-treatment protocol to the Ru-MOFs, leads to a further boost in catalytic activity. We study the benefits of (1) defect engineering and (2) hydrogen pre-treatment on the catalytic activity of Ru-MOFs in the Meerwein-Ponndorf-Verley reaction and the isomerization of allylic alcohols to saturated ketones. Simple solvent washing could not avoid catalyst deactivation during recycling for the latter reaction, while hydrogen treatment prior to each catalytic run proved to facilitate materials recyclability with constant activity over five runs., Funding by the Spanish Government is acknowledged through projects MAT2017-82288-C2-1-P and Severo Ochoa (SEV-2016-0683). This project is further funded by the Deutsche Forschungsgemeinschaft grant no. FI-502/32-1 ("DEMOFs"). KE and WRH would like to thank TUM Graduate School and the Gesellschaft Deutscher Chemiker (GDCh) for financial support. KE gratefully acknowledges support from the colleagues Olesia Halbherr (nee Kozachuk) and Wenhua Zhang.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Highly active hybrid mesoporous silica-supported base organocatalysts for C-C bond formation

  • Erigoni, Andrea
  • Hernández Soto, María Consuelo
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Segarra-Almela, Mª De La Candelaria
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] New base hybrid catalysts, based on silyl-derivatives of molecules carrying amino, diamino, pyrrolidine, pyrazolium and imidazolium functionalities have been successfully achieved through post synthetic grafting onto M41S-type support. Different characterization techniques were implemented to study the characteristics of the materials, such as elemental analysis, solid state MAS NMR and FTIR spectroscopies, X-ray diffraction (XRD), thermogravimetric and differential thermal analyses (TGA-DTA) and textural properties through N-2 physisorption analysis. The catalytic activity and recyclability of these compounds as base catalysts was demonstrated for C-C bond forming reactions such as Knoevenagel condensations and Michael additions rationalizing the differences observed as function of the reaction mechanisms. An enamine mechanism was proposed for Knoevenagel condensations and an enolate mechanism for Michael additions., The authors are grateful for financial support from the Spanish Government by MAT2017-82288-C2-1-P and Severo Ochoa Excellence ProgramSEV-2016-0683. The authors thank the MULTY2HYCAT (EUHorizon 2020 funded project under grant agreement no. 720783). A. E. acknowledges "La Caixa" foundation for PhD scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tuning the Catalytic Properties of UiO-66 Metal-Organic Frameworks: From Lewis to Defect-Induced Bronsted Acidity

  • Cirujano, F. G.
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] The Lewis/Bronsted acidity and catalytic properties of UiO-66-type metal-organic frameworks are studied in the context of tunable acid catalysts based on the presence of linker defects that create coordinatively unsaturated Zr4+ centers. Fourier transform infrared spectroscopy of adsorbed CO and direct pH measurements are employed to characterize hydrated and dehydrated UiO-66 containing different number of Zr4+ sites associated with defects. These sites can strongly polarize coordinated water molecules, which induces Bronsted acidity in the hydrated material. Upon dehydration of the solid, the coordinated water molecules are removed, and the underlying coordinatively unsaturated Zr4+ cations become exposed and available as Lewis acid sites. Herein we show, for various acid-catalyzed reactions, how it is possible to shift from a Bronsted acid to a Lewis acid catalyst by simply controlling the hydration degree of the solid. This control adds a new dimension to the design and engineering of MOFs for catalytic applications, Financial support by the Spanish Government is acknowledged through projects MAT2017-82288-C2-1-P and the Severo Ochoa program (SEV-2016-0683)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Elucidation of the Interaction Mechanism between Organic Chiral Cages with Biomolecules through Nuclear Magnetic Resonance and Theoretical Studies

  • Saez-Ferre, Sara
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Cantin Sanz, Angel|||0000-0002-3219-1919
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] A multinuclear NMR has been carried out to elucidate the mechanism of action of CC3-R box-type chiral materials for the separation of enantiomers, supported by theoretical calculations. The potential of these materials to be used as chiral resolution agents through NMR is evidence in this study., Program Severo Ochoa SEV-2016-0683 is gratefully acknowledged. S.S-F. thanks MEC for his Severo Ochoa Grant SPV-2013-067884, P.O.-B. thanks MEC for his Ramon y Cajal contract RYC-2014-16620. M.B. and F.R. thank the financial support by the Spanish Government (MAT2017-82288-C2-1-P and MAT2015-71842-P). The authors thank the MULTY2-HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Conversion of levulinic acid to gamma-valerolactone over Zr-containing metal-organic frameworks: Evidencing the role of Lewis and Bronsted acid sites

  • Guarinos, J.M.
  • Cirujano, F.G.
  • Rapeyko, Anastasia|||0000-0002-8309-3702
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Zr-containing UiO-66 and MOF-808 are evaluated for converting levulinic acid (LA) into gamma-valerolactone (GVL) through various routes: (i) Step-wise esterification of LA to n-butyl levulinate (nBuL) and Meerwein-PonndorfVerley (MPV) reduction to GVL; (ii) One-pot two-steps esterification with n-butanol followed by MPV reduction with sec-butanol; and (iii) direct conversion of LA into GVL through a tandem reaction. Selection of this multistep complex reaction evidences the participation of the different acid sites (Lewis or Bronsted) of the material in each individual step: Bronsted-induced acid sites catalyze esterification reaction efficiently, while Lewis acid sites are the preferred sites for the MPV step. Sulfation of MOF-808 is used to enhance the Bronsted acidity of MOF-808, which improves the performance for esterification. However, the sulfate groups introduced are detrimental for the MPV step, since they reduce the intra-pore space available to form the required bulky transition state. These results evidence the need to find the best equilibrium between Bronsted and Lewis acid sites to optimize the outcome of this multistep reaction., Financial support by the Spanish Government is acknowledged through projects MAT2017-82288-C2-1-P and the Severo Ochoa program (SEV-2016-0683). Aula-CEMEX is also acknowledged for a fellowship to JMG.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

What Is Measured When Measuring Acidity in Zeolites with Probe Molecules?

  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Based on theoretical calculations of CO, NH3, and pyridine adsorption at different sites in MOR and MFI zeolites, we analyze how confinement effects influence the measurement of acidity based on the interaction of probe molecules with Brönsted acid sites. Weak bases, such as CO, form neutral ZH¿CO adducts with a linear configuration that can be distorted by spatial restrictions associated with the dimensions of the pore, leading to weaker interaction, but can also be stabilized by dispersion forces if a tighter fitting with the channel void is allowed. Strong bases such as NH3 and pyridine are readily protonated on Brönsted acid sites, and the experimentally determined adsorption enthalpies include not only the thermochemistry associated with the proton transfer process itself, but also the stabilization of the Z¿¿BH+ ion pair formed upon protonation by multiple interactions with the surrounding framework oxygen atoms, leading in some cases to a heterogeneity of acidities within the same zeolite structure., This work was supported by the European Union through No. ERC-AdG-2014-671093 (SynCatMatch), and by the Spanish Government-MINECO through "Severo Ochoa" (No. SEV-2016-0683) and No. MAT2017-82288-C2-1-P projects. Red Espanola de Supercomputacion (RES) and Centre de Calcul de la Universitat de Valencia are gratefully acknowledged for computational resources.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Titanium-silicon ferrierites and their delaminated forms modified with copper as effective catalysts for low-temperature NH3-SCR

  • Swies, Aneta
  • Kowalczyk, Andrzej
  • Michalik, Marek
  • Chmielarz, Lucjan
  • Díaz, Urbano|||0000-0003-1472-8724
  • Palomares Gimeno, Antonio Eduardo|||0000-0002-6480-6607
[EN] Titanium-silicon ferrierites with different Si/Ti ratios and their delaminated forms were modified with copper by ion-exchange. The obtained samples were characterized with respect to their chemical composition (ICP-OES), structure (XRD), texture (N-2 sorption), morphology (SEM), form and aggregation of titanium and copper species (UV-vis-DRS), reducibility of deposited copper species (H-2-TPR) and surface acidity (NH3-TPD). The porous structure of the zeolitic samples strongly influenced the form and aggregation of deposited copper species. In the case of the three dimensional microporous structure of ferrierites (Ti-FER), copper was deposited mainly in the form of aggregated copper oxide species, in contrast to the open micro- and mesoporous structure of delaminated ferrierites (Ti-ITQ-6), where mainly copper in the form of monomeric cations was identified. It was shown that monomeric copper cations are more catalytically active in NO to NO2 oxidation than aggregated copper oxide species and, therefore, for the low-temperature conversion of nitrogen oxides the fast SCR reaction pathway is more effective for delaminated ferrierites modified with copper (Cu-Ti-ITQ-6) than for microporous three dimensional ferrierite catalysts (Cu-Ti-FER)., The studies financed by National Science Centre - Poland [2016/21/B/ST5/00242]. A. has been partly supported by the EU Project POWR.03.02.00-00-I004/16. U. D. acknowledges to the Spanish Government by the funding [MAT2017-82288-C2-1-P]. Part of the research was done with equipment purchased in the frame of European Regional Development Fund (Polish Innovation Economy Operational Program [POIG.02.01.00-12-023/08]).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of 2D and 3D MOFs with tuneable Lewis acidity from preformed 1D hybrid sub-domains

  • Moreno-Rodríguez, José María
  • Velty, Alexandra|||0000-0002-8263-4570
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] Novel MOF-type materials with different morphologies based on assembled 1D organic-inorganic subdomains were prepared using specific monodentate benzylcarboxylate spacers with functional substituents in the para-position as structure modulating agents. The combination of electronwithdrawing or electron-donating functions in the organic spacers with suitable solvothermal synthesis conditions allowed modulating the structuration level (2D or 3D), vacancies, physico-chemical properties and Lewis acidity strength of the metal-organic structures. Furthermore, bimetallic (Al/ Fe) MOF-type materials were synthesized by a one-pot direct process without modification of the structural framework. The activity of these hybrid materials as Lewis acid catalysts was evaluated to prepare cyanohydrins as precursors for the synthesis of biologically active compounds, and for aerobic oxidation of thiols to disulfides. The catalytic results showed that the derived MOFs exhibited modulatable Lewis acid capacities which are a function of the morphology, functionality of monodentate substituents present in the networks and a cooperative effect between metallic nodes of different nature., The authors are grateful for financial support from the Spanish Government by MAT2014-52085-C2-1-P, MAT2017-82288-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. J. M. M. acknowledges Predoctoral Fellowships from MINECO for economical support. The authors thank the MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783). The European Union is also acknowledged by ERC-AdG-2014-671093-SynCatMatch.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Crucial Role of Cluster Morphology on the Epoxidation of Propene Catalyzed by Cu-5: A DFT Study

  • Fernández Villanueva, Estefanía
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The selective oxidation of propene to propene oxide (PO) is an industrially relevant and still challenging reaction that requires the design of highly specific catalysts able to improve simultaneously activity and selectivity. Metallic copper exhibits high selectivity toward propene epoxidation that drops when the catalyst surface is oxidized under reaction conditions. On the basis of previous work showing that small planar Cu-5 clusters are more resistant to oxidation than 3D ones, we have performed a detailed theoretical study of the mechanism of propene oxidation with molecular O-2 and atomic O adsorbed on both planar and 3D Cu-5 clusters. The desired pathways leading to PO as well as the undesired routes producing propanal, acetone, or allyl intermediates that finally evolve to acrolein or CO2 have been considered, and the global analysis of all data indicates that planar Cu-5 clusters are promising candidates for the selective epoxidation of propene, This work has been supported by the European Union through ERC-AdG-2014-671093 (SynCatMatch) and by the Spanish Government through "Severo Ochoa"(SEV-2016-0683, MINECO) and MAT2017-82288-C2-1-P (AEI/FEDER, UE) Projects. E.F.V. thanks Spanish MINECO for her fellowship SVP-2013-068146.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-Temperature Catalytic NO Reduction with CO by Subnanometric Pt Clusters

  • Fernández-Villanueva, Estefanía
  • Liu, Lichen
  • Arenal, Raul
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The catalytic subnanometric metal clusters with a few atoms can be regarded as an intermediate state between single atoms and metal nanoparticles (>1 nm). Their molecule-like electronic structures and flexible geometric structures bring rich chemistry and also a different catalytic behavior, in comparison with the single-atom or nanoparticulate counterparts. In this work, by combination of operando IR spectroscopy techniques and electronic structure calculations, we will show a comparative study on Pt catalysts for CO + NO reaction at a very low temperature range (140-200 K). It has been found that single Pt atoms immobilized on MCM-22 zeolite are not stable under reaction conditions and agglomerate into Pt nanoclusters and particles, which are the working active sites for CO + NO reaction. In the case of the catalyst containing Pt nanoparticles (similar to 2 nm), the oxidation of CO to CO2 occurs in a much lower extension, and Pt nanoparticles become poisoned under reaction conditions because of a strong interaction with CO and NO. Therefore, only subnanometric Pt clusters allow NO dissociation at a low temperature and CO oxidation to occur well on the surface, while CO interaction is weak enough to avoid catalyst poisoning, resulting in a good balance to achieve enhanced catalytic performance., This work has been supported by the European Union through the European Research Council (grant ERC-AdG-2014671093, SynCatMatch) and the Spanish government through the "Severo Ochoa Program" (SEV-2016-0683) and MAT2017-82288-C2-1-P projects. L.L. thanks ITQ for providing a contract. E.F. thanks MINECO for her fellowship SVP-2013-068146. The authors also thank Microscopy Service of UPV for the TEM and STEM measurements. The HRSTEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. RA. acknowledges support from Spanish MINECO grant MAT2016-79776-P (AEI/FEDER, UE), from the Government of Aragon and the European Social Fund (grant number E13_17R, FEDER, UE), and from the European Union H2020 program "ESTEEM3" (grant number 823717). Red Espanola de Supercomputacion (RES) and Centre de Calcul de la Universitat de Valencia are acknowledged for computational resources and technical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of the Framework Topology on the Reactivity of Chiral Pyrrolidine Units Inserted in Different Porous Organosilicas

  • Llopis-Perez, Sebastian
  • Velty, Alexandra|||0000-0002-8263-4570
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] Three families of organosiliceous materials with different structuration level, order, and textural properties (non-ordered, M41S, and SBA-15 type materials) were prepared incorporating in their structural framework chiral pyrrolidine units with variable content. Likewise, non-ordered mesoporous hybrid solids were obtained through a sol-gel process in a fluoride medium, while M41S and SBA-15 type materials were obtained through micellar routes in the presence of long-chain neutral surfactants or block copolymers. Thanks to appropriate characterization studies and catalytic tests for the Michael addition between butyraldehyde and beta-nitrostyrene, we showed how the void shapes and sizes present in the structure of hybrid materials control the diffusion of reactants and products, as well as confine transition states and reactive intermediates. The best catalytic results, considering activity and enantioselectivity, were achieved in the presence of a non-ordered material, NOH-Pyr-5%, which exhibited the highest Brunauer-Emmett-Teller (BET) area, with a 96% yield and a 82% ee for the Michael adduct., This research was funded by the Spanish Government(MAT2017-82288-C2-1-P), Severo Ochoa Excellence Program (SEV-2016-0683), and MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783). S. Ll. is thankful for the predoctoral fellowship from MINECO for financial support (BES-2015-072627).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Deciphering the photobehaviour of ensemble and single crystals of Zr-based ITQ MOF composites

  • Caballero-Mancebo, Elena
  • Moreno Rodríguez, José María
  • Cohen, Boiko
  • Douhal, Abderrazzak
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] Understanding the interactions that govern the photophysical behaviour of Metal-organic frameworks (MOFs) and their composites is paramount for their photochemical and photonic applications. In this work, we report on the photobehaviour of Nile Red (NR) adsorbed on the surface of 2D Zr-ITQ-HB (NR@Zr-ITQ-HB) MOF using ultrafast (fs-ns) and single-molecule fluorescence techniques. The results show the occurrence of energy transfer processes happening in 0.34 ns between neighbouring NR molecules, intramolecular charge transfer reaction (similar to 0.6 ps) and a vibrational cooling (10 ps) of the adsorbed dye. Time-resolved single-composite fluorescence microscopy experiments on different NR-loaded composites allowed to resolve the emission from adsorbed aggregates (0.9 ns) and from the charge separated state (2.5 ns) of excited NR. The different photobehaviour of NR adsorbed on ZrO2 nanoparticles indicates the relevance of the Zr-ITQ-HB MOFs surface to the observed photo induced reactions in the composites. We discuss how the nature of both, the organic linkers and metal clusters in this kind of MOFs, affects the photodynamics of the composites. These results may help in designing MOFs "on demand" for their application in photons-based science and technology, like photocatalysis and lighting., This work was supported by MINECO through projects MAT201786532-R, and MAT2017-82288-C2-1-P, and by the JCCM through project SBPLY/19/180501/000212. J.M.M. thanks the predoctoral fellowship from the Severo Ochoa program for support (SEV-20160683), and E.C.-M thanks the MINECO for the FPI fellowship (BES2015-071495).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Confined Pt-1(1+) Water Clusters in a MOF Catalyze the Low-Temperature Water-Gas Shift Reaction with both CO2 Oxygen Atoms Coming from Water

  • Rivero-Crespo, Miguel Ángel
  • Mon, Marta
  • Ferrando-Soria, Jesus
  • Lopes, Christian W.
  • Hernandez-Garrido, Juan carlos
  • López-Haro, Miguel
  • Calvino, Jose J.
  • Ramos-Fernandez, Enrique V.
  • Armentano, Donatella
  • Pardo, Emilio
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Leyva Perez, Antonio|||0000-0003-1063-5811
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The synthesis and reactivity of single metal atoms in a low-valence state bound to just water, rather than to organic ligands or surfaces, is a major experimental challenge. Herein, we show a gram-scale wet synthesis of Pt-1(1+) stabilized in a confined space by a crystallographically well-defined first water sphere, and with a second coordination sphere linked to a metal-organic framework (MOF) through electrostatic and H-bonding interactions. The role of the water cluster is not only isolating and stabilizing the Pt atoms, but also regulating the charge of the metal and the adsorption of reactants. This is shown for the low-temperature water-gas shift reaction (WGSR: CO + H2O CO2 + H-2), where both metal coordinated and H-bonded water molecules trigger a double water attack mechanism to CO and give CO2 with both oxygen atoms coming from water. The stabilized Pt1+ single sites allow performing the WGSR at temperatures as low as 50 degrees C., This work was supported by the MINECO (Spain) (Projects CTQ2016-75671-P, MAT2013 40823-R, MAT2016-81732-ERC, CTQ2017-86735-P, MAT2017-86992-R, MAT2017-82288-C2-1-P and Excellence Units "Severo Ochoa" and "Maria de Maeztu" SEV-2016-0683 and MDM-2015-0538) the Generalitat Valenciana (PROMETEOII/2014/004) and the Ministero dell'Istruzione, dell'Universita e della Ricerca (Italy) and the Junta de Andalucia (FQM-195). M.M. and M.-A.R.C. thanks the MINECO for a predoctoral contract. Thanks are also extended to the Ramon y Cajal Program (E.V.R.-F., E.P. and J.C.H.-G.) and the "Subprograma atraccio de talent-contractes postdoctorals de la Universitat de Valencia" (J.F.-S.). M.L.-H. acknowledges the financial support from the Juan de la Cierva Fellowships Program of MINECO (IJCI-2014-19367). We thank Diamond Light Source for provision of synchrotron radiation facility and Dr David Allan and Dr Sarah Barnett for their assistance at I19 beamline.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Unraveling the Reaction Mechanism and Active Sites of Metal-Organic Frameworks for Glucose Transformations in Water: Experimental and Theoretical Studies

  • Rojas-Buzo, Sergio
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Moliner Marin, Manuel|||0000-0002-5440-716X
[EN] The catalytic performance of two different MOFs, UiO-66 and MOF-808, containing Lewis acid active sites has been evaluated for the transformation of glucose in water and compared with that of analogous Lewis acid Zr-beta zeolite. While fructose is the main product obtained on Zr-beta, mannose production increases when using Zr-MOFs as catalysts. Kinetic studies reveal a lower activation energy barrier for glucose epimerization to mannose when using Zr-MOF catalysts (similar to 83-88 and similar to 100 kJ/mol for glucose epimerization and isomerization, respectively). A C-13 NMR study using (13)C1-labeled glucose allows confirming that on Zr-MOF catalysts, mannose is exclusively formed following the glucose epimerization route through a 1,2-intramolecular carbon shift, whereas the two-step glucose -> fructose -> mannose isomerization via 1,2-intramolecular proton shifts is the preferred pathway on Zr-beta. A computational study reveals a different mode of adsorption of deprotonated glucose on Zr-MOFs that allows decreasing the activation barrier for the 1,2-intramolecular carbon shift. The combination of spectroscopic, kinetic, and theoretical studies allows unraveling the nature of the metal sites in Zr-MOFs and Zr-beta catalysts and to propose a structure-activity relationship between the different Lewis acid sites and the glucose transformation reactions. The results presented here could permit new rationalized MOF catalyst designs with the specific active sites to facilitate particular reaction mechanisms., This work was supported by the Spanish Government through "Severo Ochoa"(SEV-2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE), and RTI2018-101033-BI00 (MCIU/AEI/FEDER, UE); and by Generalitat Valenciana through AICO/2019/060. The Electron Microscopy Service of the UPV is also acknowledged for their help in sample characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The influence of ethanol-assisted washes to obtain swollen and pillared MWW-type zeolite with high degree ordering of lamellar structure

  • Schwanke, Anderson Joel
  • Pergher, Sibele
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] We studied the influence of the ethanol used as a washing solvent for obtaining swollen and pillared MWW topology zeolites with long-range ordering of lamellar structure. The diffractogram results showed that the increased number of washes increases the degree of order of the lamellar structure. Thermogravimetric results showed a considerable removal of the weakly interacting surfactant molecules after the third wash. The washes with ethanol did not remove the surfactant that strongly interacted with the MWW structure. The pillared material after the third wash showed a long-range ordering of the lamellar structure with the surface area of 728 m(2) g(-1), mesopore sizes of 2-4 nm and morphology characteristic of pillared MWW-type zeolites., Anderson Joel Schwanke is grateful the CAPES Foundation and PDSE program (process number 99999.004779/2014-02). Urbano Diaz acknowledges to the Spanish Government (MAT2014-52085-C2-1-P and MAT2017-82288-C2-1-P).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The 2D or 3D morphology of sub-nanometer Cu-5 and Cu-8 clusters changes the mechanism of CO oxidation

  • Fernández, Estefanía
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The mechanism of the CO oxidation reaction catalysed by planar Cu-5, three dimensional (3D) Cu-5, and 3D Cu-8 clusters is theoretically investigated at the B3PW91/Def2TZVP level. All three clusters are able to catalyse the reaction with similar activation energies for the rate determining step, about 16-18 kcal mol(-1), but with remarkable differences in the reaction mechanism depending on cluster morphology. Thus, for 3D Cu-5 and Cu-8 clusters, O-2 dissociation is the first step of the mechanism, followed by two consecutive CO + O reaction steps, the second one being rate determining. In contrast, on planar Cu-5 the reaction starts with the formation of an OOCO intermediate in what constitutes the rate determining step. The O-O bond is broken in a second step, releasing the first CO2 and leaving one bi-coordinately adsorbed O atom which reacts with CO following an Eley-Rideal mechanism with a low activation energy, in contrast to the higher barriers obtained for this step on 3D clusters., This work was supported by the Spanish Government through ``Severo Ochoa Program'' (SEV-2016-0683), MAT2017-82288-C21-P and MCIN PID2020-112590GB-C21. We thank Red Espan~ola de Supercomputacio ' n (RES) and Centre de Ca`lcul de la Universitat de Valencia for computational resources and technical support. E. F. thanks the Spanish MINECO for her fellowship SVP-2013-068146.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chemical and Structural Parameter Connecting Cavity Architecture, Confined Hydrocarbon Pool Species, and MTO Product Selectivity in Small-Pore Cage-Based Zeolites

  • Ferri-Vicedo, Pau
  • Li, Chengeng
  • Paris, Cecilia|||0000-0002-5673-8114
  • Vidal Moya, José Alejandro
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The catalysts used in the methanol-to-olefins (MTO) reaction are considered dual systems comprising an inorganic zeolite framework and organic compounds hosted inside that act as cocatalysts. The influence of zeolite cavity architecture on the preferential stabilization of cationic intermediates involved in the paring and side-chain routes of the hydrocarbon pool mechanism is analyzed by means of density functional theory (DFT) calculations, catalyst testing, and C-13 NMR spectroscopy for some small-pore cage-based zeolites. A correlation between the degree of methylation of the entrapped methylbenzenium (MB+) cations and the selectivity to ethene and propene is found experimentally and explained in terms of the electronic distribution of the first intermediate of the paring route. A deep understanding of the reaction mechanism and of the specific host guest interactions taking place inside zeolite catalysts allows establishing a quantitative parameter that is indicative for the contribution of the paring route and therefore the C-3(=)/C-2(=) ratio in the MTO reaction., This work has been supported by the European Union through ERC-AdG-2014-671093 (SynCatMatch), Spanish Government through "Severo Ochoa" (SEV-2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE), and RTI2018-101033-B-100 (MCIU/AEI/FEDER, UE), and by the Fundacion Ramon Areces through a research contract (CIVP18A3908). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. Red Espanola de Supercomputacion (RES) and Servei d'Informatica de la Universitat de Valencia are acknowledged for computational resources and technical support. C.L. acknowledges the China Scholarship Council (CSC) for a Ph.D. fellowship. P.F. thanks ITQ for acontract. The authors thank Prof. Fernando Rey and Dr. Joaquin Martinez for helpful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Facile &quot, Green&quot, Aqueous Synthesis of Mono- and Bimetallic Trimesate Metal-Organic Frameworks

  • Nowacka, Anna Elzbieta
  • Briantais, Pol
  • Prestipino, Carmelo
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Various isoreticular monometallic (Co2+, Ni2+, Cu2+, and Zn2+) and bimetallic (Co-Ni, Co-Zn, Mn-Ni) trimesate MOFs have been prepared by a fast (10 min) and green synthesis method from aqueous solutions, at room temperature and ambient pressure. A combined XRD and SEM/EDX analysis clearly revealed bimetallic compounds form true solid solutions rather than a simple physical mixture of pure-phase monometallic compounds. Moreover, a detailed evaluation of the evolution of cell parameters with the composition provides strong evidence indicating a preferential occupation of one crystallographic position (bidentate terminal sites) by Co2+ (or Mn2+) ions. This leads to a precise and predictable array of metal ions in the framework, which can be finely tuned by changing the overall composition of the bimetallic MOF. Implications are envisaged in the design and catalytic properties of well-defined single-site catalysts., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 641887 (project acronym: DEFNET) and the Spanish Government through projects MAT2017-82288-C2-1-P and Severo Ochoa (SEV-2016-0683). The Microscopy Service of the Universitat Politecnica de Valencia is gratefully acknowledged for the electron microscopy measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Regioirregular and catalytic Mizoroki-Heck reactions

  • Garnes-Portoles, Francisco
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Castellanos-Soriano, Jorge
  • Jiménez, M Consuelo|||0000-0002-8057-4316
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Pérez-Ruiz, Raúl|||0000-0003-1136-3598
  • Leyva Perez, Antonio|||0000-0003-1063-5811
  • Greco, Rossella
  • Lopez-Haro, Miguel
  • Hernández-Garrido, Juan Carlos
[EN] The palladium-catalysed cross-coupling reaction between alkenes and aryl halides (the Mizoroki-Heck reaction) is a powerful methodology to construct new carbon-carbon bonds. However, the success of this reaction is in part hampered by an extremely marked regioselectivity on the double bond, which dictates that electron-poor alkenes react exclusively on the beta-carbon. Here, we show that ligand-free, few-atom palladium clusters in solution catalyse the alpha-selective intramolecular Mizoroki-Heck coupling of iodoaryl cinnamates, and mechanistic studies support the formation of a sterically encumbered cinnamate-palladium cluster intermediate. Following this rationale, the alpha-selective intermolecular coupling of aryl iodides with styrenes is also achieved with palladium clusters encapsulated within fine-tuned and sterically restricted zeolite cavities to produce 1,1-bisarylethylenes, which are further engaged with aryl halides by a metal-free photoredox-catalysed coupling. These ligand-free methodologies significantly expand the chemical space of the Mizoroki-Heck coupling., This work was supported by MINECO (Spain, projects CTQ 2017-86735-P, PID2019-105391GB-C22 and MAT2017-82288-C2-1-P, Severo Ochoa programme SEV-2016-0683 and the Juan de la Cierva programme). F.G.-P. and R.G. thank ITQ for the concession of a contract. J.O.-M. acknowledges the Juan de la Cierva programme for the concession of a contract, and R.P.-R. and J.C.-S. thank the Plan GenT programme (CIDEGENT/2018/044) funded by Generalitat Valenciana. HR STEM measurements were performed at DME-UCA in Cadiz University, with financial support from FEDER/MINECO (PID2019-110018GA-I00 and PID2019-107578GA-I00). We acknowledge ALBA Synchrotron for allocating beamtime and CL AE SS beamline staff for their technical support during our experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mobility and Reactivity of Cu+ Species in Cu-CHA Catalysts under NH3-SCR-NOx Reaction Conditions: Insights from AIMD Simulations

  • Millán-Cabrera, Reisel|||0000-0002-4489-5411
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Cnudde, Pieter
  • Van Speybroeck, Veronique
[EN] The mobility of the copper cations acting as active sites for the selective catalytic reduction of nitrogen oxides with ammonia in Cu-CHA catalysts varies with temperature and feed composition. Herein, the migration of [Cu(NH3)(2)](+) complexes between two adjacent cavities of the chabazite structure, including other reactant molecules (NO, O-2, H2O, and NH3), in the initial and final cavities is investigated using ab initio molecular dynamics (AIMD) simulations combined with enhanced sampling techniques to describe hopping events from one cage to the other. We find that such diffusion is only significantly hindered by the presence of excess NH3 or NO in the initial cavity, since both reactants form with [Cu(NH3)(2)](+) stable intermediates which are too bulky to cross the 8-ring windows connecting the cavities. The presence of O-2 modifies strongly the interaction of NO with Cu+. At low temperatures, we observe NO detachment from Cu+ and increased mobility of the [Cu(NH3)(2)](+) complex, while at high temperatures, NO reacts spontaneously with O-2 to form NO2. The present simulations give evidence for recent experimental observations, namely, an NH3 inhibition effect on the SCR reaction at low temperatures, and transport limitations of NO and NH3 at high temperatures. Our first principle simulations mimicking operating conditions support the existence of two different reaction mechanisms operating at low and high temperatures, the former involving dimeric Cu(NH3)(2)-O-2-Cu(NH3)(2) species and the latter occurring by direct NO oxidation to NO2 in one single cavity., Spanish Government through (SEV-2016-0683, MINECO) and MAT2017-82288-C2-1-P (AEI/FEDER, UE). CSIC through the i-link+ program (LINKA20381). European Union's Horizon 2020 research and innovation program through consolidator ERC grant agreement No. 647755 DYNPOR (2015-2020). Research Foundation -Flanders (FWO).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Combined Spectroscopic and Computational Study of Nitrobenzene Activation on Non-Noble Metals-Based Mono- and Bimetallic Catalysts

  • Millán-Cabrera, Reisel|||0000-0002-4489-5411
  • Soriano Rodríguez, Mª Dolores|||0000-0002-1799-895X
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Cerdá-Moreno, Cristina
[EN] In this paper, substituted anilines are industrially obtained by direct hydrogenation of nitroaromatic compounds with molecular H-2 using metals as catalysts. Previous theoretical studies proposed that the mechanism of the reaction depends on the nature of the metal used as a catalyst, and that rationally designed bimetallic materials might show improved catalytic performance. Herein, we present IR spectroscopic studies of nitrobenzene interactions with monometallic Ni/SiO2, Cu/SiO2 and Pd/SiO2, and with bimetallic CuNi/SiO2 and CuPd/SiO2 catalysts, both in the absence and presence of H-2, combined with density functional theory (DFT) calculations on selected bimetallic NiCu(111) and PdCu(111) models. The results obtained experimentally confirm that the reaction mechanism on non-noble metals such as Ni proceeds through N-O bond dissociation, generating nitrosobenzene intermediates, while, on noble metals, such as Pd, H-attack is necessary to activate the NO bond. Moreover, a bimetallic CuPd/SiO2 catalyst with a Pd enriched surface is prepared that exhibits an enhanced H-2 dissociation ability and a particular reactivity at the boundary between the two metals., This research was funded by Spanish Government through "Severo Ochoa" program (SEV2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE), RTI2018-099668-B-C21 (MINECO) and by Generalitat Valenciana through AICO/2017/153 Project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cobalt(II) Bipyrazolate Metal-Organic Frameworks as Heterogeneous Catalysts in Cumene Aerobic Oxidation: A Tag-Dependent Selectivity

  • Nowacka, Anna Elzbieta
  • Vismara, R.
  • Mercuri, G.
  • Moroni, M.
  • Domasevitch, K.
  • di Nicola, C.
  • Pettinari, C.
  • Giambastiani, G.
  • Galli, S.
  • Rossin, A.
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Three metal-organic frameworks with the general formula Co(BPZX) (BPZX(2-) = 3-X-4,4'-bipyrazolate, X = H, NH2, NO2) constructed with ligands having different functional groups on the same skeleton have been employed as heterogeneous catalysts for aerobic liquid-phase oxidation of cumene with O-2 as oxidant. O-2 adsorption isotherms collected at p(O2) = 1 atm and T = 195 and 273 K have cast light on the relative affinity of these catalysts for dioxygen. The highest gas uptake at 195 K is found for Co(BPZ) (3.2 mmol/g (10.1 wt % O-2)), in line with its highest BET specific surface area (926 m(2)/g) in comparison with those of Co(BPZNH(2)) (317 m(2)/g) and Co(BPZNO(2)) (645 m(2)/g). The O-2 isosteric heat of adsorption (Q(2)) trend follows the order Co(BPZ) > Co(BPZNH(2)) > Co(BPZNO(2)). Interestingly, the selectivity in the cumene oxidation products was found to be dependent on the tag present in the catalyst linker: while cumene hydroperoxide (CHP) is the main product obtained with Co(BPZ) (84% selectivity to CHP after 7 h, p(O2) = 4 bar, and T = 363 K), further oxidation to 2-phenyl-2-propanol (PP) is observed in the presence of Co(BPZNH(2)) as the catalyst (69% selectivity to PP under the same experimental conditions)., S.G., R.V., and M.M. acknowledge Universita dell'Insubria for partial funding. G.G. thanks the Italian MIUR through the PRIN 2017 Project Multi-e: Multielectron Transfer for the Conversion of Small Molecules: an Enabling Technology for the Chemical Use of Renewable Energy (20179337R7) for financial support. G.G. thanks the TRAINER project (Catalysts for Transition to Renewable Energy Future) ref. ANR-17-MPGA-0017 for support. C.P. thanks the University of Camerino and the Italian MIUR throughout the PRIN 2015 Project Towards a Sustainable Chemistry (20154 x 9ATP_002). This project has also received funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 641887 (project acronym: DEFNET) and the Spanish Government through projects MAT2017-82288-C2-1-P and Severo Ochoa (SEV-2016-0683). Professor Norberto Masciocchi (University of Insubria, Como, Italy) is acknowledged for fruitful discussions. The authors are also grateful to Dr. Giulia Tuci (CNR-ICCOM Florence, Italy) for help with the XPS curve fitting. The Microscopy Service of the Universitat Politècnica de València is gratefully acknowledged for the electron microscopy measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design and Synthesis of the Active Site Environment in Zeolite Catalysts for Selectively Manipulating Mechanistic Pathways

  • Li, Chengeng
  • Ferri-Vicedo, Pau
  • Paris, Cecilia|||0000-0002-5673-8114
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] By combining kinetics and theoretical calculations, we show here the benefits of going beyond the concept of static localized and defined active sites on solid catalysts, into a system that globally and dynamically considers the active site located in an environment that involves a scaffold structure particularly suited for a target reaction. We demonstrate that such a system is able to direct the reaction through a preferred mechanism when two of them are competing. This is illustrated here for an industrially relevant reaction, the diethylbenzene-benzene transalkylation. The zeolite catalyst (ITQ-27) optimizes location, density, and environment of acid sites to drive the reaction through the preselected and preferred diaryl-mediated mechanism, instead of the alkyl transfer pathway. This is achieved by minimizing the activation energy of the selected pathway through weak interactions, much in the way that it occurs in enzymatic catalysts. We show that ITQ-27 outperforms previously reported zeolites for the DEB-Bz transalkylation and, more specifically, industrially relevant zeolites such as faujasite, beta, and mordenite., This work was supported by the European Union through ERC-AdG-2014-671093 (SynCatMatch), Spanish Government through "Severo Ochoa" (SEV-2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE) and RTI2018-10103-B-I00 (MCIU/AEI/FEDER, UE), and by Generalitat Valenciana through AICO/2019/060. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. Red Espanola de Supercomputacion (RES) and Servei d'Informatica de la Universitat de Valencia (SIUV) are acknowledged for computational resources and technical support. P. F. and C. Li thank ITQ for their contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structural study of functional hierarchical porous carbon synthesized from metal-organic framework template

  • Reinoso, D. M.
  • Frechero, M. A.
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] In this work, nitrogen-doped hierarchical porous carbon (NPC) was obtained from an effective and facile synthesis route based on metal-organic framework (MOF)-drive approach using Zr-metal-organic framework (UiO-66-NH2) as a template. The structural analysis of synthesized NPC using different heat treatment was performed through X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, and N-2 adsorption-desorption isotherm at 77K characterization. The results achieved indicate that Zr-MOF is an appropriate starting precursor to attain functional carbon materials with remarkable physicochemical properties for potential advanced applications. Thereby, it was evidenced that the NPC synthesis temperature has an influence on resulting structural properties as well as nitrogen functionalities and amount. Thereby, the obtained NPC exhibits a disorder porous structure with high BET surface area (765-867 m(2)/g), pore size from microporous to mesoporous, and 3-4% of N content. Related to nitrogen functionalities, the heteroatom corresponds to quaternary, pyrrolic, and pyridinic bonding, indicating that it was successfully incorporated into the carbon framework., The authors thank Agencia Promotion Nacional de Promocion Cientifica y Tecnologica, Argentina, Consejo Nacional de Investigaciones Cientificas y Tecnicas (CONICET), PICT 2016-0101 Argentina Innovadora, PGI Q24/078 and MAT2017-82288-C2-1-P projects for the financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Lamellar MWW Zeolite With Silicon and Niobium Oxide Pillars: A Catalyst for the Oxidation of Volatile Organic Compounds

  • Schwanke, Anderson Joel
  • Balzer, Rosana
  • Lopes, Christian Wittee
  • Meira, Debora Motta
  • Pergher, Sibele
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] In this work, an MWW-type zeolite with pillars containing silicon and niobium oxide was synthesized to obtain a hierarchical zeolite. The effect of niobium insertion in the pillaring process was determined by combining a controllable acidity and accessibility in the final material. All pillared materials had niobium occupying framework positions in pillars and extra-framework positions. The pillared material, Pil-Nb-4.5 with 4.5 wt % niobium, did not compromise the mesoporosity formed by pillaring, while the increase of niobium in the structure gradually decreased the mesoporosity and ordering of lamellar stacking. The morphology of the pillared zeolites and the niobium content were found to directly affect the catalytic activity. Specifically, we report on the activity of the MWW-type zeolites with niobium catalyzing the gas-phase oxidation of volatile organic compounds (VOCs), which is an important reaction for clean environmental. All produced MWW-type zeolites with niobium were catalytically active, even at low temperatures and low niobium loading, and provided excellent conversion efficiencies., A.J.S. thanks the CordenacAo de Aperfeicoamento de Pessoal de Nivel Superior-Brasil (CAPES)-Finance Code 001, the PDSE program (process number 99999.004779/2014-02) and the prof. Claudio Radtke from the PPGQ-UFRGS for the XPS analyses. C.W.L. is grateful to INOMAT/CAPES for a postdoctoral fellowship. U.D. thanks the funding by the Spanish Government (MAT2017-82288-C2-1-P).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Unraveling Competitive Electron and Energy-Transfer Events at the Interfaces of a 2D MOF and Nile Red Composites: Effect of the Length and Structure of the Linker

  • Caballero-Mancebo, Elena
  • Moreno-Rodríguez, José María
  • Cohen, Boiko
  • Douhal, Abderrazzak
  • Díaz, Urbano|||0000-0003-1472-8724
  • Corma Canós, Avelino|||0000-0002-2232-3527
[EN] The distribution and interactions of organic molecules adsorbed on the surface of materials play important roles in many catalytic and photonic processes. Here, we show that the length and chemical structure of the linker in new Al-ITQ metal-organic frameworks (MOFs) are fundamental for the dynamics of the dye Nile Red (NR) adsorbed on its surface. For the studied composites using A1-ITQ-4-ethylbenzoic acid (EB), Al-ITQ-4-aminobenzoic acid (AB), and Al-ITQ : EB exposed to the aniline (AN) or N,N-dimethylani-line (DMA) atmospheres, we observed a very fast (similar to 1.2 ps) intramolecular charge-transfer reaction in adsorbed NR molecules. For NR@Al-ITQEB, where the linker has a shorter aliphatic chain (two carbons), the dye molecules present a homoenergy-transfer (ET) process, which is faster (similar to 90 ps) than in the previously reported NR@Al-ITQ-4-heptylbenzoic acid composite with longer aliphatic chain (seven carbons, similar to 220 ps). The more polar environment created by the Al-oxide nodes in Al-ITQ-EB surface around the NR populations strongly favors the ET event. When the linker structure contains phenyl amine moieties, the resulting NR@Al-ITQ-AB composites show different and rich photodynamics, in which a fast electron transfer reaction from the MOF aniline moiety to the adsorbed NR occurs in similar to 17 ps, inhibiting the ET process between the dye molecules near the MOF surface. This process also was confirmed in Al-ITQ-EB MOF exposed to AN and DMA gas atmospheres, as well as NR in pure aniline. The obtained results demonstrate how modifications in the length and structure of the organic linker in this MOF change the interface interactions and outcome of the photoinduced processes in the composites. Our findings on dye-MOF interface photobehavior are relevant to the design of new materials in which the interface plays a key role in their performance in the fields of catalysis and photonics., This work was supported by MINECO through projects MAT2014-57646-P, MAT2017-86532-R, and MAT2017-82288-C2-1-P. J.M.M. thanks the predoctoral fellowship from the Severo Ochoa program for support (SEV-2016-0683), and E.C.-M thanks the MINECO for the FPI fellowship (BES-2015-071495). We thank Dr. John Spencer Baskin for reading the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Active Base Hybrid Organosilica Materials based on Pyrrolidine Builder Units for Fine Chemicals Production

  • Llopis-Perez, Sebastian
  • Velty, Alexandra|||0000-0002-8263-4570
  • Díaz, Urbano|||0000-0003-1472-8724
[EN] The catalytic activity of "pyrrolidine type" fragments included or anchored in the mesoporous silica supports or polymeric frameworks have been fully reported for enantioselective transformation. Nevertheless, low attention was focused on their catalytic abilities to perform base-catalyzed reaction. Accordingly, hybrid materials including pyrrolidine fragments in the mesoporous silica supports were prepared following different synthesis methods, such as micellar and fluoride sol-gel routes in absence of structural directing agents. Their great catalytic performance was explored for various base-catalyzed reactions to the formation of C-C bond through Knoevenagel, Claisen-Schmidt and Henry condensations under microwave irradiation. The benefits of microwave irradiation combined with suitable catalytic properties of pyrrolidine hybrid materials with strong base sites and high accessibility to active centers, allowed carrying out successfully base-catalyzed condensation reactions for the production of fine chemicals. Moreover, the hybrid catalyst exhibited high selectivity and good stability over different catalytic cycles contributing to environmental sustainability., The authors are grateful for financial support from the Spanish Government, MAT2017-82288-C2-1-P and PID2020112590GB C21/AEI/10.13039/501100011033, and MULTY2HYCAT European project (EUHorizon 2020 funded project under grant agreement no. 720783).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chiral Hybrid Materials Based on Pyrrolidine Builder Units to Perform Asymmetric Michael Additions with High Stereocontrol

  • Llopis, Sebastián
  • García Ramón, María Teresa
  • Cantín, Ángel
  • Velty, Alexandra Isabelle Lucienne
  • Díaz Morales, Urbano
  • Corma, Avelino
A new chiral mesoporous hybrid material was synthesized based on pyrrolidine units included in a siliceous framework, HybPyr, and integrated into the organic–inorganic structure, from a specific bis-silylated precursor. A fluoride sol–gel methodology under soft synthesis conditions and in the absence of sophisticated structural directing agents allowed the generation of a mesoporous architecture with a homogeneous distribution of active chiral moieties along the network. The hybrid material was studied by means of different characterization techniques (TGA, NMR and IR spectroscopy, chemical and elemental analyses, TEM, and textural measurements), verifying the stability and integrity of the asymmetric active sites in the solid. The hybrid material, HybPyr, is an excellent asymmetric heterogeneous and recyclable catalyst for enantioselective Michael addition of linear aldehydes to β-nitrostyrene derivatives with high stereocontrol of the reaction products., The authors are grateful for financial support from the Spanish Government by MAT2014-52085-C2-1-P, MAT2017-82288- C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. The authors thank the MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783). The European Union is also acknowledged by ERC-AdG-2014-671093-SynCatMatch., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selective Aerobic Oxidation of Cumene to Cumene Hydroperoxide over Mono- and Bimetallic Trimesate Metal–Organic Frameworks Prepared by a Facile “Green” Aqueous Synthesis

  • Nowacka, Anna
  • Briantais, Pol
  • Prestipino, Carmelo
  • Llabrés i Xamena, Francesc X.
Co–Ni and Mn–Ni bimetallic trimesate MOFs prepared by a fast aqueous synthesis method are excellent and reusable catalysts for the selective aerobic oxidation of cumene to cumene hydroperoxide (CHP). Isolation of Co2+ (or Mn2+) in an inert Ni-BTC framework is a good strategy to optimize CHP selectivity above 90%: since only Co2+ sites catalyze CHP decomposition, a drop of the CHP selectivity is observed as the cobalt content in the bimetallic MOF increases. The statistical probability of having isolated Co2+ sites is calculated as a function of the total cobalt content of the bimetallic compound, assuming homogeneous distribution of Co2+ ions in the Ni-BTC framework and preferential occupation of terminal sites. Thus, in our best sample, with a Co:Ni ratio of 5:95, 73% of the total Co2+ ions are isolated so that CHP decomposition/overoxidation processes at the surface of the catalyst are not likely to occur before CHP desorption. This can explain the excellent CHP selectivity (91%) attained over this material. This “site isolation” effect is further supported by similar findings on Mn–Ni bimetallic compounds., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 641887 (project acronym: DEFNET) and the Spanish Government through projects MAT2017-82288-C2-1-P and Severo Ochoa (SEV-2016-0683)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

What Is Measured When Measuring Acidity in Zeolites with Probe Molecules?

  • Boronat, Mercedes
  • Corma, Avelino
Based on theoretical calculations of CO, NH, and pyridine adsorption at different sites in MOR and MFI zeolites, we analyze how confinement effects influence the measurement of acidity based on the interaction of probe molecules with Brönsted acid sites. Weak bases, such as CO, form neutral ZH-CO adducts with a linear configuration that can be distorted by spatial restrictions associated with the dimensions of the pore, leading to weaker interaction, but can also be stabilized by dispersion forces if a tighter fitting with the channel void is allowed. Strong bases such as NH and pyridine are readily protonated on Brönsted acid sites, and the experimentally determined adsorption enthalpies include not only the thermochemistry associated with the proton transfer process itself, but also the stabilization of the Z-BH ion pair formed upon protonation by multiple interactions with the surrounding framework oxygen atoms, leading in some cases to a heterogeneity of acidities within the same zeolite structure., This work was supported by the European Union through No. ERC-AdG-2014-671093 (SynCatMatch), and by the Spanish Government-MINECO through “Severo Ochoa” (No. SEV-2016-0683) and No. MAT2017-82288-C2-1-P projects. Red Española de Supercomputación (RES) and Centre de Càlcul de la Universitat de València are gratefully acknowledged for computational resources.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Control of the Reaction Mechanism of Alkylaromatics Transalkylation by Means of Molecular Confinement Effects Associated to Zeolite Channel Architecture

  • Margarit, V.J.
  • Al-Khattaf, Sulaiman
  • Osman, Mogahid
  • Al-Khattaf, S.
  • Boronat, Mercedes
  • Corma, Avelino
Transalkylation of alkylaromatics catalyzed by acid zeolites is a process widely employed in the petrochemical industry for upgrading aromatic fractions. The reaction mechanism is complex as it can proceed either by intermolecular alkyl-transfer involving dealkylation-alkylation steps with surface alkoxy species as reaction intermediates or through the formation of bulkier diaryl intermediates. We have investigated how the possible formation of such bulky intermediates in the microporous channel system of different zeolite structures, together with their stabilization by confinement effects, can determine the preferential mechanism and, therefore, the selectivity of ethylbenzene disproportionation into benzene and diethylbenzene. For testing the concept, four zeolites, MCM-22 (3D MWW) with 10R pores, 12R cavities and external 12R hemicavities or >cups>, DS-ITQ-2, (2D MWW) with the same 10R channels as MCM-22, no 12R cavities and much larger proportion of external >cups>, a 10R ZSM-5 (MFI) and a 12R mordenite (MOR) have been used. The higher activity of DS-ITQ-2 and MCM-22 as compared to ZSM-5 at low temperature (573 K) and the high selectivity to diethylbenzene of the bidimensional material under all reaction conditions considered have been explained by means of DFT calculations. Contrary to what could be expected according to the available space at the external >cups> and at the 10R channels of the MWW structure, the bulkier diaryl intermediates are better stabilized within the 10R channel system than at the >cups> open at the external surface of the MWW materials. We show from this perspective how the channel structure and molecular confinement stabilization also explain the operating reaction mechanism in ZSM-5 and mordenite., This work was supported by the Spanish Government through “Severo Ochoa Program” (SEV 2012-0267; SEV-2016-0683), RTI2018-101033-B-I00 and MAT2017-82288-C2-1-P, by the Fundación Ramón Areces through a research contract of the “Life and Materials Science” program, and by the European Union through ERC-AdG-2014-671093 (SynCatMatch). Red Española de Supercomputación (RES) and Centre de Càlcul de la Universitat de Valencia are gratefully acknowledged for computational resources and technical support. We thank the Electron Microscopy Service of the UPV for their help in sample characterization
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of 2D and 3D MOFs with tuneable Lewis acidity from preformed 1D hybrid sub-domains

  • Moreno, José María
  • Velty, Alexandra Isabelle Lucienne
  • Díaz Morales, Urbano
  • Corma, Avelino
Novel MOF-type materials with different morphologies based on assembled 1D organic-inorganic sub-domains were prepared using specific monodentate benzylcarboxylate spacers with functional substituents in the para-position as structure modulating agents. The combination of electron-withdrawing or electron-donating functions in the organic spacers with suitable solvothermal synthesis conditions allowed modulating the structuration level (2D or 3D), vacancies, physico-chemical properties and Lewis acidity strength of the metal-organic structures. Furthermore, bimetallic (Al/Fe) MOF-type materials were synthesized by a one-pot direct process without modification of the structural framework. The activity of these hybrid materials as Lewis acid catalysts was evaluated to prepare cyanohydrins as precursors for the synthesis of biologically active compounds, and for aerobic oxidation of thiols to disulfides. The catalytic results showed that the derived MOFs exhibited modulatable Lewis acid capacities which are a function of the morphology, functionality of monodentate substituents present in the networks and a cooperative effect between metallic nodes of different nature., The authors are grateful for financial support from the Spanish Government by MAT2014-52085-C2-1-P, MAT2017-82288-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. J. M. M. acknowledges Predoctoral Fellowships from MINECO for economical support. The authors thank the MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783). The European Union is also acknowledged by ERC-AdG-2014-671093-SynCatMatch.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Facile >green> Aqueous Synthesis of Mono- And Bimetallic Trimesate Metal-Organic Frameworks

  • Nowacka, Anna
  • Briantais, Pol
  • Prestipino, Carmelo
  • Llabrés i Xamena, Francesc X.
Various isoreticular monometallic (Co, Ni, Cu, and Zn) and bimetallic (Co-Ni, Co-Zn, Mn-Ni) trimesate MOFs have been prepared by a fast (10 min) and green synthesis method from aqueous solutions, at room temperature and ambient pressure. A combined XRD and SEM/EDX analysis clearly revealed bimetallic compounds form true solid solutions rather than a simple physical mixture of pure-phase monometallic compounds. Moreover, a detailed evaluation of the evolution of cell parameters with the composition provides strong evidence indicating a preferential occupation of one crystallographic position (bidentate terminal sites) by Co (or Mn) ions. This leads to a precise and predictable array of metal ions in the framework, which can be finely tuned by changing the overall composition of the bimetallic MOF. Implications are envisaged in the design and catalytic properties of well-defined single-site catalysts., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 641887 (project acronym: DEFNET) and the Spanish Government through projects MAT2017-82288-C2-1-P and Severo Ochoa (SEV-2016-0683). The Microscopy Service of the Universitat Politècnica de València is gratefully acknowledged for the electron microscopy measurements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical and Structural Parameter Connecting Cavity Architecture, Confined Hydrocarbon Pool Species, and MTO Product Selectivity in Small-Pore Cage-Based Zeolites

  • Li, Chengeng
  • Paris Carrizo, Cecilia Gertrudis
  • Vidal-Moya, Alejandro
  • Moliner Marín, Manuel
  • Boronat, Mercedes
  • Corma, Avelino
The catalysts used in the methanol-to-olefins (MTO) reaction are considered dual systems comprising an inorganic zeolite framework and organic compounds hosted inside that act as cocatalysts. The influence of zeolite cavity architecture on the preferential stabilization of cationic intermediates involved in the paring and side-chain routes of the hydrocarbon pool mechanism is analyzed by means of density functional theory (DFT) calculations, catalyst testing, and 13C NMR spectroscopy for some small-pore cage-based zeolites. A correlation between the degree of methylation of the entrapped methylbenzenium (MB+) cations and the selectivity to ethene and propene is found experimentally and explained in terms of the electronic distribution of the first intermediate of the paring route. A deep understanding of the reaction mechanism and of the specific host–guest interactions taking place inside zeolite catalysts allows establishing a quantitative parameter that is indicative for the contribution of the paring route and therefore the C3=/C2= ratio in the MTO reaction., This work has been supported by the European Union through ERC-AdG-2014-671093 (SynCatMatch), Spanish Government through “Severo Ochoa” (SEV-2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE), and RTI2018-101033-B-I00 (MCIU/AEI/FEDER, UE), and by the Fundación Ramón Areces through a research contract (CIVP18A3908). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. Red Española de Supercomputación (RES) and Servei d’Informàtica de la Universitat de València are acknowledged for computational resources and technical support. C.L. acknowledges the China Scholarship Council (CSC) for a Ph.D. fellowship. P.F. thanks ITQ for a contract. The authors thank Prof. Fernando Rey and Dr. Joaquín Martínez for helpful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-Temperature Catalytic NO Reduction with CO by Subnanometric Pt Clusters

  • Fernández, E.
  • Liu, Lichen
  • Boronat, Mercedes
  • Arenal, Raúl
  • Concepción, Patricia
  • Corma, Avelino
The catalytic subnanometric metal clusters with a few atoms can be regarded as an intermediate state between single atoms and metal nanoparticles (>1 nm). Their molecule-like electronic structures and flexible geometric structures bring rich chemistry and also a different catalytic behavior, in comparison with the single-atom or nanoparticulate counterparts. In this work, by combination of operando IR spectroscopy techniques and electronic structure calculations, we will show a comparative study on Pt catalysts for CO + NO reaction at a very low temperature range (140–200 K). It has been found that single Pt atoms immobilized on MCM-22 zeolite are not stable under reaction conditions and agglomerate into Pt nanoclusters and particles, which are the working active sites for CO + NO reaction. In the case of the catalyst containing Pt nanoparticles (∼2 nm), the oxidation of CO to CO2 occurs in a much lower extension, and Pt nanoparticles become poisoned under reaction conditions because of a strong interaction with CO and NO. Therefore, only subnanometric Pt clusters allow NO dissociation at a low temperature and CO oxidation to occur well on the surface, while CO interaction is weak enough to avoid catalyst poisoning, resulting in a good balance to achieve enhanced catalytic performance., This work has been supported by the European Union through the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch) and the Spanish government through the “Severo Ochoa Program” (SEV-2016-0683) and MAT2017-82288-C2-1-P projects. L.L. thanks ITQ for providing a contract. E.F. thanks MINECO for her fellowship SVP-2013-068146. The authors also thank Microscopy Service of UPV for the TEM and STEM measurements. The HRSTEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. R.A. acknowledges support from Spanish MINECO grant MAT2016-79776-P (AEI/FEDER, UE), from the Government of Aragon and the European Social Fund (grant number E13_17R, FEDER, UE), and from the European Union H2020 program “ESTEEM3” (grant number 823717). Red Española de Supercomputación (RES) and Centre de Càlcul de la Universitat de Valencia are acknowledged for computational resources and technical support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the framework topology on the reactivity of chiral pyrrolidine units inserted in different porous organosilicas

  • Llopis, Sebastián
  • Velty, Alexandra Isabelle Lucienne
  • Díaz Morales, Urbano
Three families of organosiliceous materials with different structuration level, order, and textural properties (non-ordered, M41S, and SBA-15 type materials) were prepared incorporating in their structural framework chiral pyrrolidine units with variable content. Likewise, non-ordered mesoporous hybrid solids were obtained through a sol-gel process in a fluoride medium, while M41S and SBA-15 type materials were obtained through micellar routes in the presence of long-chain neutral surfactants or block copolymers. Thanks to appropriate characterization studies and catalytic tests for the Michael addition between butyraldehyde and β-nitrostyrene, we showed how the void shapes and sizes present in the structure of hybrid materials control the diffusion of reactants and products, as well as confine transition states and reactive intermediates. The best catalytic results, considering activity and enantioselectivity, were achieved in the presence of a non-ordered material, NOH-Pyr-5%, which exhibited the highest Brunauer-Emmett-Teller (BET) area, with a 96% yield and a 82% ee for the Michael adduct., This research was funded by the Spanish Government (MAT2017-82288-C2-1-P), Severo Ochoa Excellence Program (SEV-2016-0683), and MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783). S. Ll. is thankful for the predoctoral fellowship from MINECO for financial support (BES-2015-072627).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Expandable layered hybrid materials based on individual 1D metalorganic nanoribbons

  • Moreno, J.M.
  • Velty, Alexandra Isabelle Lucienne
  • Díaz Morales, Urbano
Different metalorganic lamellar hybrid materials based on associated nanoribbons were synthesized by the use of alkyl-benzyl monocarboxylate spacers, containing alkyl tails with variable lengths, which acted like structural growing inhibitors. These molecular agents were perpendicularly located and coordinated to aluminium nodes in the interlayer space, controlling the separation between individual structure sub-units. The hybrid materials were studied by X-ray diffraction (XRD), chemical and thermogravimetrical analysis (TGA), nuclear magnetic resonance (NMR) and infrared spectroscopy (IR), and field emission scanning electron microscopy (FESEM)/transmission electron microscopy (TEM), showing their physicochemical properties. The specific capacity of the metalorganic materials to be exfoliated through post-synthesis treatments, using several solvents due to the presence of 1D structure sub-units and a marked hydrophobic nature, was also evidenced., The authors are grateful for financial support from the Spanish Government by MAT2017-82288-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. J. M. M. acknowledges Predoctoral Fellowships from MINECO for economical support. The authors thank the MULTY2HYCAT EU-Horizon 2020 funded project under grant agreement no.720783. We gratefully acknowledge the micrographs obtained in the Servicio de Microscopía (Universitat Politècnica de València).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly active hybrid mesoporous silica-supported base organocatalysts for C[sbnd]C bond formation

  • Erigoni, Andrea
  • Hernández-Soto, M.Consuelo
  • Rey García, Fernando
  • Segarra, Candela
  • Díaz Morales, Urbano
New base hybrid catalysts, based on silyl-derivatives of molecules carrying amino, diamino, pyrrolidine, pyrazolium and imidazolium functionalities have been successfully achieved through post synthetic grafting onto M41S-type support. Different characterization techniques were implemented to study the characteristics of the materials, such as elemental analysis, solid state MAS NMR and FTIR spectroscopies, X-ray diffraction (XRD), thermogravimetric and differential thermal analyses (TGA-DTA) and textural properties through N physisorption analysis. The catalytic activity and recyclability of these compounds as base catalysts was demonstrated for C[sbnd]C bond forming reactions such as Knoevenagel condensations and Michael additions rationalizing the differences observed as function of the reaction mechanisms. An enamine mechanism was proposed for Knoevenagel condensations and an enolate mechanism for Michael additions., The authors are grateful for financial support from the Spanish Government by MAT2017-82288-C2-1-P and Severo Ochoa Excellence ProgramSEV-2016-0683. The authors thank the MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783). A. E. acknowledges “La Caixa” foundation for PhD scholarship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-temperature catalytic NO reduction with CO by subnanometric Pt clusters

  • Fernández, Estefanía
  • Liu, Lichen
  • Boronat, Mercedes
  • Arenal, Raúl
  • Concepción, Patricia
  • Corma, Avelino
The catalytic subnanometric metal clusters with a few atoms can be regarded as an intermediate state between single atoms and metal nanoparticles (>1 nm). Their molecule-like electronic structures and flexible geometric structures bring rich chemistry and also a different catalytic behavior, in comparison with the single-atom or nanoparticulate counterparts. In this work, by combination of operando IR spectroscopy techniques and electronic structure calculations, we will show a comparative study on Pt catalysts for CO + NO reaction at a very low temperature range (140–200 K). It has been found that single Pt atoms immobilized on MCM-22 zeolite are not stable under reaction conditions and agglomerate into Pt nanoclusters and particles, which are the working active sites for CO + NO reaction. In the case of the catalyst containing Pt nanoparticles (∼2 nm), the oxidation of CO to CO2 occurs in a much lower extension, and Pt nanoparticles become poisoned under reaction conditions because of a strong interaction with CO and NO. Therefore, only subnanometric Pt clusters allow NO dissociation at a low temperature and CO oxidation to occur well on the surface, while CO interaction is weak enough to avoid catalyst poisoning, resulting in a good balance to achieve enhanced catalytic performance., This work has been supported by the European Union through the European Research Council (grant ERC-AdG-2014-671093, SynCatMatch) and the Spanish government through the “Severo Ochoa Program” (SEV-2016-0683) and MAT2017-82288-C2-1-P projects. L.L. thanks ITQ for providing a contract. E.F. thanks MINECO for her fellowship SVP-2013-068146. The authors also thank Microscopy Service of UPV for the TEM and STEM measurements. The HRSTEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. R.A. acknowledges support from Spanish MINECO grant MAT2016-79776-P (AEI/FEDER, UE), from the Government of Aragon and the European Social Fund (grant number E13_17R, FEDER, UE), and from the European Union H2020 program “ESTEEM3” (grant number 823717)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Readily available Ti-beta as an efficient catalyst for greener and sustainable production of campholenic aldehyde

  • Puche, Marta
  • Velty, Alexandra Isabelle Lucienne
Different Ti-beta zeolite samples were prepared following a convenient and optimized post-synthetic route and starting from commercial Al-beta zeolite. Lewis acid sites have been successfully incorporated into vacant tetrahedral (T)-sites of a dealuminated beta-framework by ball-milling solid-state ion-exchange. A tribology-ball milling process was used in order to increase the interaction between dealuminated-beta zeolite and the Ti-precursor. Thermal treatments with water and aqueous solution of NaNO or Li NO allowed optimization of the catalytic properties of the Ti-Lewis active sites which exhibited excellent catalytic activity and stability for the isomerization of α-pinene oxide into campholenic aldehyde in both batch and fixed bed reactor systems. Additionally, the catalytic performance of the post-synthesised Ti-beta zeolite was compared to a Ti-beta zeolite prepared in fluoride media. From different points of view such as preparation of readily, highly active, selective and stable catalysts, throughput, sustainability and cost, herein we report the selective solid catalysed α-PO isomerization with excellent results, 88% selectivity and yield, a CA production of 225 g g h and new opportunities., The authors are grateful for financial support from the Spanish Government by MAT2017-82288-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683. The contribution of Mr. Pablo Ramos to the experimental work is also gratefully acknowledged
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Production of aromatics from biomass by computer-aided selection of the zeolite catalyst

  • Margarit, V.J.
  • Gallego, Eva M.
  • Paris Carrizo, Cecilia Gertrudis
  • Moliner Marín, Manuel
  • Corma, Avelino
Taking into account that the transformation of biomass-derived 2,5-dimethylfuran (DMF) to p-xylene involves Diels-Alder (DA) cycloaddition as the limiting step, the use of an ITQ-2 zeolite obtained by direct synthesis (DS-ITQ-2) as a catalyst for this reaction is proposed based on the fact that the organic molecule employed for its synthesis mimics the size and shape of the DA oxanorbornene cycloadduct intermediate. Periodic Density Functional Theory (DFT) calculations reveal a better stabilization of the oxanorbornene intermediate within the external hemicavities or "cups"of the DS-ITQ-2 zeolite (MWW-framework) than in other zeolites employed for this reaction, such as FAU and Beta. Interestingly, experimental results also show improved catalytic conversion values for the DS-ITQ-2 zeolite compared to FAU and Beta, in good agreement with the stabilization energies calculated by DFT. The "ab initio"catalyst design presented here to enhance the catalytic performance for the transformation of biomass-derived products is a valuable example that could be employed for the rationalization of other chemical processes catalyzed by zeolites., This work has been supported by the European Union through ERC-AdG-2014-671093 (SynCatMatch) and by Spanish Government through “Severo Ochoa” (SEV-2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE) and RTI2018-101033-B-I00 (MCIU/AEI/FEDER, UE). E. M. G. acknowledges “La Caixa – Severo Ochoa” International PhD Fellowships (call 2015). Elisa García is acknowledged for her technical assistance in this work. The Electron Microscopy Service of the UPV is also acknowledged for their help in sample characterization. We appreciate the support of ExxonMobil Research and Engineering for their help with our efforts in fundamental catalytic research.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of Zeolite Framework Composition and Flexibility on Methanol-To-Olefins Selectivity: Confinement or Diffusion?

  • Ferri, Pau
  • Li, Chengeng
  • Millán, Reisel
  • Martínez Triguero, Joaquín
  • Moliner Marín, Manuel
  • Boronat, Mercedes
  • Corma, Avelino
The methanol-to-olefins reaction catalyzed by small-pore cage-based acid zeolites and zeotypes produces a mixture of short chain olefins, whose selectivity to ethene, propene and butene varies with the cavity architecture and with the framework composition. The product distribution of aluminosilicates and silicoaluminophosphates with the CHA and AEI structures (H-SSZ-13, H-SAPO-34, H-SSZ-39 and H-SAPO-18) has been experimentally determined, and the impact of acidity and framework flexibility on the stability of the key cationic intermediates involved in the mechanism and on the diffusion of the olefin products through the 8r windows of the catalysts has been evaluated by means of periodic DFT calculations and ab initio molecular dynamics simulations. The preferential stabilization by confinement of fully methylated hydrocarbon pool intermediates favoring the paring pathway is the main factor controlling the final olefin product distribution., This work has been supported by the European Union through ERC‐AdG‐2014‐671093 (SynCatMatch), Spanish Government through “Severo Ochoa” (SEV‐2016‐0683, MINECO), MAT2017‐82288‐C2‐1‐P (AEI/FEDER, UE) and RTI2018‐101033‐B‐I00 (MCIU/AEI/FEDER, UE), and by Generalitat Valenciana through AICO/2019/060. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. Red Española de Supercomputación (RES) and Servei d'Informàtica de la Universitat de València (SIUV) are acknowledged for computational resources and technical support. P.F. and R.M. thank ITQ for their contracts. C.L. acknowledges China Scholarship Council (CSC) for a Ph.D fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of Zeolite Framework Composition and Flexibility on Methanol-To-Olefins Selectivity: Confinement or Diffusion?

  • Ferri, Pau
  • Millán, Reisel
  • Martínez Triguero, Joaquín
  • Moliner Marín, Manuel
  • Boronat, Mercedes
  • Corma, Avelino
The methanol-to-olefins reaction catalyzed by small-pore cage-based acid zeolites and zeotypes produces a mixture of short chain olefins, whose selectivity to ethene, propene and butene varies with the cavity architecture and with the framework composition. The product distribution of aluminosilicates and silicoaluminophosphates with the CHA and AEI structures (H-SSZ-13, H-SAPO-34, H-SSZ-39 and H-SAPO-18) has been experimentally determined, and the impact of acidity and framework flexibility on the stability of the key cationic intermediates involved in the mechanism and on the diffusion of the olefin products through the 8r windows of the catalysts has been evaluated by means of periodic DFT calculations and ab initio molecular dynamics simulations. The preferential stabilization by confinement of fully methylated hydrocarbon pool intermediates favoring the paring pathway is the main factor controlling the final olefin product distribution., This work has been supported by the European Union through ERC‐AdG‐2014‐671093 (SynCatMatch), Spanish Government through “Severo Ochoa” (SEV‐2016‐0683, MINECO), MAT2017‐82288‐C2‐1‐P (AEI/FEDER, UE) and RTI2018‐101033‐B‐I00 (MCIU/AEI/FEDER, UE), and by Generalitat Valenciana through AICO/2019/060. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. Red Española de Supercomputación (RES) and Servei d'Informàtica de la Universitat de València (SIUV) are acknowledged for computational resources and technical support. P.F. and R.M. thank ITQ for their contracts. C.L. acknowledges China Scholarship Council (CSC) for a Ph.D fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Crucial Role of Cluster Morphology on the Epoxidation of Propene Catalyzed by Cu5: A DFT Study

  • Fernández, Estefanía
  • Boronat, Mercedes
  • Corma, Avelino
The selective oxidation of propene to propene oxide (PO) is an industrially relevant and still challenging reaction that requires the design of highly specific catalysts able to improve simultaneously activity and selectivity. Metallic copper exhibits high selectivity toward propene epoxidation that drops when the catalyst surface is oxidized under reaction conditions. On the basis of previous work showing that small planar Cu5 clusters are more resistant to oxidation than 3D ones, we have performed a detailed theoretical study of the mechanism of propene oxidation with molecular O2 and atomic O adsorbed on both planar and 3D Cu5 clusters. The desired pathways leading to PO as well as the undesired routes producing propanal, acetone, or allyl intermediates that finally evolve to acrolein or CO2 have been considered, and the global analysis of all data indicates that planar Cu5 clusters are promising candidates for the selective epoxidation of propene., This work has been supported by the European Union through ERC-AdG-2014-671093 (SynCatMatch) and by the Spanish Government through ‘‘Severo Ochoa” (SEV-2016-0683, MINECO) and MAT2017-82288-C2-1-P (AEI/FEDER, UE) Projects. E.F.V. thanks Spanish MINECO for her fellowship SVP-2013-068146.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Defect-Engineered Ruthenium MOFs as Versatile Heterogeneous Hydrogenation Catalysts

  • Konstantin Epp
  • Luz, Ignacio
  • Heinz, Werner R.
  • Rapeyko, Anastasia
  • Llabrés i Xamena, Francesc X.
  • Fischer, Roland A.
Ruthenium MOF [Ru3(BTC)2Yy] ·Gg (BTC=benzene-1,3,5-tricarboxylate; Y=counter ions=Cl¿¿ , OH¿¿ , OAc¿¿ ; G=guest molecules= HOAc, H2O) is modified via a mixed-linker approach, using mixtures of BTC and pyridine-3,5-dicarboxylate (PYDC) linkers, triggering structural defects at the distinct Ru2 paddlewheel (PW) nodes. This defect-engineering leads to enhanced catalytic properties due to the formation of partially reduced Ru2-nodes. Application of a hydrogen pre-treatment protocol to the Ru¿¿ MOFs, leads to a further boost in catalytic activity. We study the benefits of (1) defect engineering and (2) hydrogen pre-treatment on the catalytic activity of Ru¿¿ MOFs in the Meerwein-Ponndorf-Verley reaction and the isomerization of allylic alcohols to saturated ketones. Simple solvent washing could not avoid catalyst deactivation during recycling for the latter reaction, while hydrogen treatment prior to each catalytic run proved to facilitate materials recyclability with constant activity over five runs., Funding by the Spanish Government is acknowledged through projects MAT2017‐82288‐C2‐1‐P and Severo Ochoa (SEV‐2016‐0683). This project is further funded by the Deutsche Forschungsgemeinschaft grant no. FI‐502/32‐1 (“DEMOFs”). KE and WRH would like to thank TUM Graduate School and the Gesellschaft Deutscher Chemiker (GDCh) for financial support. KE gratefully acknowledges support from the colleagues Olesia Halbherr (neé Kozachuk) and Wenhua Zhang.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the Catalytic Properties of UiO-66 Metal-Organic Frameworks: From Lewis to Defect-Induced Brønsted Acidity

  • Cirujano, F.G.
  • Llabrés i Xamena, Francesc X.
The Lewis/Brønsted acidity and catalytic properties of UiO-66-type metal-organic frameworks are studied in the context of tunable acid catalysts based on the presence of linker defects that create coordinatively unsaturated Zr4+ centers. Fourier transform infrared spectroscopy of adsorbed CO and direct pH measurements are employed to characterize hydrated and dehydrated UiO-66 containing different number of Zr4+ sites associated with defects. These sites can strongly polarize coordinated water molecules, which induces Brønsted acidity in the hydrated material. Upon dehydration of the solid, the coordinated water molecules are removed, and the underlying coordinatively unsaturated Zr4+ cations become exposed and available as Lewis acid sites. Herein we show, for various acid-catalyzed reactions, how it is possible to shift from a Brønsted acid to a Lewis acid catalyst by simply controlling the hydration degree of the solid. This control adds a new dimension to the design and engineering of MOFs for catalytic applications., Financial support by the Spanish Government is acknowledged through projects MAT2017-82288-C2-1-P and the Severo Ochoa program (SEV-2016-0683).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cobalt(II) Bipyrazolate Metal-Organic Frameworks as Heterogeneous Catalysts in Cumene Aerobic Oxidation: A Tag-Dependent Selectivity

  • Nowacka, Anna
  • Vismara, R.
  • Mercuri, G
  • Moroni, M.
  • Palomino, Miguel
  • Domasevitch, K.V.
  • Di Nicola, C.
  • Pettinari, Claudio
  • Giambastiani, Giuliano
  • Llabrés i Xamena, Francesc X.
  • Galli, Simona
  • Rossin, Andrea
Three metal-organic frameworks with the general formula Co(BPZX) (BPZX = 3-X-4,4′-bipyrazolate, X = H, NH, NO) constructed with ligands having different functional groups on the same skeleton have been employed as heterogeneous catalysts for aerobic liquid-phase oxidation of cumene with O as oxidant. O adsorption isotherms collected at p = 1 atm and T = 195 and 273 K have cast light on the relative affinity of these catalysts for dioxygen. The highest gas uptake at 195 K is found for Co(BPZ) (3.2 mmol/g (10.1 wt % O)), in line with its highest BET specific surface area (926 m/g) in comparison with those of Co(BPZNH) (317 m/g) and Co(BPZNO) (645 m/g). The O isosteric heat of adsorption (Q) trend follows the order Co(BPZ) > Co(BPZNH) > Co(BPZNO). Interestingly, the selectivity in the cumene oxidation products was found to be dependent on the tag present in the catalyst linker: While cumene hydroperoxide (CHP) is the main product obtained with Co(BPZ) (84% selectivity to CHP after 7 h, p = 4 bar, and T = 363 K), further oxidation to 2-phenyl-2-propanol (PP) is observed in the presence of Co(BPZNH) as the catalyst (69% selectivity to PP under the same experimental conditions)., S.G., R.V., and M.M. acknowledge Università dell’Insubria for partial funding. G.G. thanks the Italian MIUR through the PRIN 2017 Project Multi-e: Multielectron Transfer for the Conversion of Small Molecules: an Enabling Technology for the Chemical Use of Renewable Energy (20179337R7) for financial support. G.G. thanks the TRAINER project (Catalysts for Transition to Renewable Energy Future) ref. ANR-17-MPGA-0017 for support. C.P. thanks the University of Camerino and the Italian MIUR throughout the PRIN 2015 Project Towards a Sustainable Chemistry (20154 × 9ATP_002). This project has also received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 641887 (project acronym: DEFNET) and the Spanish Government through projects MAT2017-82288-C2-1-P and Severo Ochoa (SEV-2016-0683). Professor Norberto Masciocchi (University of Insubria, Como, Italy) is acknowledged for fruitful discussions. The authors are also grateful to Dr. Giulia Tuci (CNR-ICCOM Florence, Italy) for help with the XPS curve fitting. The Microscopy Service of the Universitat Politècnica de València is gratefully acknowledged for the electron microscopy measurements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Theoretical and Spectroscopic Evidence of the Dynamic Nature of Copper Active Sites in Cu-CHA Catalysts under Selective Catalytic Reduction (NH3–SCR–NOx) Conditions

  • Millán, Reisel
  • Cnudde, Pieter
  • Hoffman, Alexander E. J.
  • Lopes, Christian W.
  • Concepción, Patricia
  • van Speybroeck, Veronique
  • Boronat, Mercedes
The dynamic nature of the copper cations acting as active sites for selective catalytic reduction of nitrogen oxides with ammonia is investigated using a combined theoretical and spectroscopic approach. Ab initio molecular dynamics simulations of Cu-CHA catalysts in contact with reactants and intermediates at realistic operating conditions show that only ammonia is able to release Cu+ and Cu2+ cations from their positions coordinated to the zeolite framework, forming mobile Cu+(NH3)2 and Cu2+(NH3)4 complexes that migrate to the center of the cavity. Herein, we give evidence that such mobilization of copper cations modifies the vibrational fingerprint in the 800–1000 cm–1 region of the IR spectra. Bands associated with the lattice asymmetric T-O-T vibrations are perturbed by the presence of coordinated cations, and allow one to experimentally follow the dynamic reorganization of the active sites at operating conditions., This work has been supported by the European Union through ERC-AdG-2014-671093 (SynCatMatch), Spanish Government through ‘‘Severo Ochoa” (SEV-2016-0683, MINECO), and MAT2017-82288-C2-1-P (AEI/FEDER, UE). Red Española de Supercomputación (RES) and Servei d’Informàtica de la Universitat de València (SIUV) are acknowledged for computational resources and technical support. R.M. thanks ITQ for his contract. V.V.S. and P.C. acknowledge funding from the European Union’s Horizon 2020 research and innovation program (consolidator ERC grant agreement No. 647755 - DYNPOR (2015–2020)). V.V.S. acknowledges the Research Board of the Ghent University (BOF). The computational resources and services used were provided by Ghent University (Stevin Supercomputer Infrastructure), the VSC (Flemish Supercomputer Center), funded by the Research Foundation - Flanders (FWO)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MCM-22, MCM-36, and ITQ-2 zeolites with different Si/Al molar ratios as effective catalysts of methanol and ethanol dehydration

  • Marosz, M.
  • Samojeden, B.
  • Kowalczyk, A.
  • Rutkowska, M.
  • Motak, M.
  • Díaz Morales, Urbano
  • Palomares Gimeno, Antonio Eduardo
  • Chmielarz, L.
MCM-22, MCM-36, and ITQ-2 zeolites with the intended Si/Al molar ratios of 15, 25, and 50 were synthetized and tested as catalysts for dehydration of methanol to dimethyl ether and dehydration of ethanol to diethyl ether and ethylene. The surface concentration of acid sites was regulated by the synthesis of zeolite precursors with different aluminum content in the zeolite framework, while the influence of porous structure on the overall efficiency of alcohol conversion was analyzed by application of zeolitic materials with different types of porosity-microporous MCM-22 as well as microporous-mesoporous MCM-36 and ITQ-2. The zeolitic samples were characterized with respect to their: chemical composition (ICP-OES), structure (XRD, FT-IR), texture (N sorption), and surface acidity (NH-TPD). Comparison of the catalytic activity of the studied zeolitic catalysts with other reported catalytic systems, including zeolites with the similar Si/Al ratio as well as γ-AlO (one of the commercial catalysts for methanol dehydration), shows a great potential of MCM-22, MCM-36, and ITQ-2 in the reactions of alcohols dehydration., U.D. acknowledges to the Spanish Government grant number MAT2017-82288-C2-1-P. The research was partially done using the equipment purchased from the funds of European Regional Development Fund, Polish Innovation Economy Operational Program, grant numberPOIG.02.01.00-12-023/08.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MOFs based on 1D structural sub-domains with Brønsted acid and redox active sites as effective bi-functional catalysts

  • Moreno, J.M.
  • Velty, Alexandra Isabelle Lucienne
  • Díaz Morales, Urbano
A novel family of lamellar MOF-type materials, which contain Brønsted acid sites together with redox active centers, based on assembled 1D organic-inorganic nanoribbons were obtained through direct solvothermal synthesis routes, using specific monotopic benzylcarboxylate spacers with thiol substituents in thepara-position like structural modulator compounds and effective post-synthesis oxidized treatments to generate accessible sulfonic groups. Low-dimensional aluminum metal-organic materials, containing free sulfonic pendant groups (Al-ITQ-SOH), were successfully tested in several acid reactions, such as acetalization, esterification and ring opening of epoxides with a significant impact on fine chemistry processes. The direct introduction of stabilized Pd nanoparticles, cohabitating with pendant sulfonic groups, allowed the preparation of active bi-functional MOF-type hybrid materials (Al-ITQ-SOH/Pd) capable of carrying out one-pot two-step oxidation-acetalization reactions, exhibiting high yield and high activity during consecutive catalytic cycles., The authors are grateful for financial support from the Spanish Government, MAT2017-82288-C2-1-P, the Severo Ochoa Excellence Program SEV-2016-0683, and MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Catalytic oxidation of organic sulfides by H2O2 in the presence of titanosilicate zeolites

  • Radko, M.
  • Rutkowska, M.
  • Kowalczyk, A.
  • Mikrut, P.
  • Święs, A.
  • Díaz Morales, Urbano
  • Palomares Gimeno, Antonio Eduardo
  • Macyk, W.
  • Chmielarz, L.
Titanosilicate ferrierite zeolite (FER) and its delaminated form (ITQ-6), with various Si/Ti molar ratios, were synthetized and tested as catalysts for diphenyl sulfide (PhS) and dimethyl sulfide (DMS) oxidation with HO. The zeolites were characterized with respect to their chemical composition (ICP-OES), structure (XRD, UV–vis DRS) and texture (low-temperature N adsorption-desorption). Titanium in the FER and ITQ-6 samples was present mainly in the zeolite framework with a significant contribution of titanium in the extraframework positions. Titanosilicate zeolites of FER and ITQ-6 series were found to be active catalysts of diphenyl and dimethyl sulfides oxidation by HO to sulfoxides (PhSO/DMSO) and sulfones (PhSO/DMSO). The efficiency of these reactions depends on the porous structure of the zeolite catalysts – conversion of larger molecules of diphenyl sulfide was significantly higher in the presence of delaminated zeolite Ti-ITQ-6 due to the possibility of the interlayer mesopores penetration by reactants. On the other side diphenyl sulfide molecules are too large to be accommodated into micropores of FER zeolite. The efficiency of dimethyl sulfide conversion, due to relatively small size of this molecule, was similar in the presence of Ti-FER and Ti-ITQ-6 zeolites. For all catalysts, the organic sulfide conversion was significantly intensified under UV irradiation. It was suggested that Ti cations in the zeolite framework, as well as in the extraframework, species play a role of the single site photocatalysts active in the formation of hydroxyl radicals, which are known to be effective oxidants of the organic sulfides., The studies were carried out in the frame of project 2016/21/B/ST5/00242 from the National Science Centre (Poland). Part of the research was done with equipment purchased in the frame of European Regional Development Fund (Polish Innovation Economy Operational Program – contract no. POIG.02.01.00-12-023/08). U.D. acknowledges to the Spanish Government by the funding (MAT2017-82288-C2-1-P). The work was partially supported by the Foundation for Polish Science (FNP) within the TEAM project (POIR.04.04.00-00-3D74/16).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Lamellar MWW Zeolite With Silicon and Niobium Oxide Pillars: A Catalyst for the Oxidation of Volatile Organic Compounds

  • Schwanke, A.J.
  • Balzer, Rosana
  • Wittee Lopes, C.
  • Motta Meira, D.
  • Díaz Morales, Urbano
  • Corma, Avelino
  • Pergher, Sibele
In this work, an MWW-type zeolite with pillars containing silicon and niobium oxide was synthesized to obtain a hierarchical zeolite. The effect of niobium insertion in the pillaring process was determined by combining a controllable acidity and accessibility in the final material. All pillared materials had niobium occupying framework positions in pillars and extra-framework positions. The pillared material, Pil-Nb-4.5 with 4.5 wt % niobium, did not compromise the mesoporosity formed by pillaring, while the increase of niobium in the structure gradually decreased the mesoporosity and ordering of lamellar stacking. The morphology of the pillared zeolites and the niobium content were found to directly affect the catalytic activity. Specifically, we report on the activity of the MWW-type zeolites with niobium catalyzing the gas-phase oxidation of volatile organic compounds (VOCs), which is an important reaction for clean environmental. All produced MWW-type zeolites with niobium were catalytically active, even at low temperatures and low niobium loading, and provided excellent conversion efficiencies., A.J.S. thanks the Cordenação de Aperfeiçoamento de Pessoal de Nível Superior—Brasil (CAPES)—Finance Code 001, the PDSE program (process number 99999.004779/2014‐02) and the prof. Claudio Radtke from the PPGQ‐UFRGS for the XPS analyses. C.W.L. is grateful to INOMAT/CAPES for a postdoctoral fellowship. U.D. thanks the funding by the Spanish Government (MAT2017‐82288‐C2‐1‐P).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Organic-Free Synthesis of Zeolite Y with High Si/Al Ratios: Combined Strategy of In Situ Hydroxyl Radical Assistance and Post-Synthesis Treatment

  • Wang, J.
  • Liu, P.
  • Boronat, Mercedes
  • Ferri, Pau
  • Xu, Z.
  • Liu, Peng
  • Shen, B.
  • Wang, Z.
  • Yu, J.
Zeolite Y, with a high SiO/AlO ratio (SAR), plays an important role in fluidized catalytic cracking processes. However, in situ synthesis of zeolite Y with high SARs remains a challenge because of kinetic limitations. Here, zeolite Y with an SAR of 6.35 is synthesized by a hydroxyl radical assisted route. Density-functional theory (DFT) calculations suggest that hydroxyl radicals preferentially enhanced the formation of Si-O-Si bonds, thus leading to an increased SAR. To further increase the SAR, a dealumination process was carried out using citric acid, with a subsequent second-step hydrothermal crystallization, giving an SAR of up to 7.5 while maintaining good crystallinity and high product yield. The resultant zeolite Y shows good performance in cumene cracking. Introduced here is a new strategy for synthesizing high SAR zeolite Y, which is widely used in commercial applications., We thank the National Natural Science Foundation of China (Grant 21920102005, 21621001 and 21835002), the National Key Research and Development Program of China (Grant 2016YFB0701100), the 111 Project (B17020), and the Spanish Government‐MINECO (SEV‐2016‐0683 and MAT2017‐82288‐C2‐1‐P (AEI/FEDER, UE)) for supporting this work. P. F. thanks ITQ for his contract.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unraveling the reaction mechanism and active sites of metal-organic frameworks for glucose transformations in water: Experimental and theoretical studies

  • Rojas-Buzo, Sergio
  • Corma, Avelino
  • Boronat, Mercedes
  • Moliner Marín, Manuel
The catalytic performance of two different MOFs, UiO-66 and MOF-808, containing Lewis acid active sites has been evaluated for the transformation of glucose in water and compared with that of analogous Lewis acid Zr-β zeolite. While fructose is the main product obtained on Zr-β, mannose production increases when using Zr-MOFs as catalysts. Kinetic studies reveal a lower activation energy barrier for glucose epimerization to mannose when using Zr-MOF catalysts (~83-88 and ~100 kJ/mol for glucose epimerization and isomerization, respectively). A 13C NMR study using 13C1-labeled glucose allows confirming that on Zr-MOF catalysts, mannose is exclusively formed following the glucose epimerization route through a 1,2-intramolecular carbon shift, whereas the two-step glucose → fructose → mannose isomerization via 1,2-intramolecular proton shifts is the preferred pathway on Zr-β. A computational study reveals a different mode of adsorption of deprotonated glucose on Zr-MOFs that allows decreasing the activation barrier for the 1,2-intramolecular carbon shift. The combination of spectroscopic, kinetic, and theoretical studies allows unraveling the nature of the metal sites in Zr-MOFs and Zr-β catalysts and to propose a structure-activity relationship between the different Lewis acid sites and the glucose transformation reactions. The results presented here could permit new rationalized MOF catalyst designs with the specific active sites to facilitate particular reaction mechanisms., This work was supported by the Spanish Government through ‘‘Severo Ochoa” (SEV-2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE), and RTI2018-101033-B-I00 (MCIU/AEI/FEDER, UE); and by Generalitat Valenciana through AICO/2019/060. The Electron Microscopy Service of the UPV is also acknowledged for their help in sample characterization.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selective active site placement in Lewis acid zeolites and implications for catalysis of oxygenated compounds

  • Rodríguez-Fernández, Aída
  • Di Iorio, J. R.
  • Paris Carrizo, Cecilia Gertrudis
  • Boronat, Mercedes
  • Corma, Avelino
  • Román-Leshkov, Y.
  • Moliner Marín, Manuel
The selective incorporation of isolated framework Lewis acid sites at specific crystallographic positions in high-silica zeolites was achieved by applying a rationalized post-synthetic grafting methodology. The removal of framework Ge atoms from a Ge-BEC zeolite with low concentrations of Ge in the framework (Si/Ge ∼ 150) followed by grafting allows the synthesis of Sn-BEC zeolites with Sn atoms positionally biased into the double-4-ring (D4R) crystallographic positions of the BEC framework. Spectroscopic characterization using solid-state nuclear magnetic resonance (NMR) coupled with theoretical calculations revealed that Sn atoms preferentially form open Sn sites in the D4R of Sn-BEC. This observation was supported by IR spectra of adsorbed deuterated acetonitrile (CD3CN), a known titrant of Sn sites in zeolites. The catalytic implications of selective incorporation of open Sn sites in Sn-BEC were probed using the Meerwein-Ponndorf-Verley-Oppenauer (MPVO) reaction. Although the MPVO turnover rates normalized by the total number of open Sn sites were comparable on Sn-BEC and a conventional Sn-Beta catalyst synthesized in fluoride media (Sn-Beta(F)), Sn-BEC demonstrated higher per gram reaction rates because of its larger fraction of open sites compared to Sn-Beta(F). These results highlight the advantage of placing active sites in targeted locations within a zeolite structure. The methodology presented here to selectively place catalytic active sites via sacrificial heteroatoms, such as Ge, can be generalized for the design of many other tetrahedrally-coordinated metal-containing zeolites. This journal is, This work has been supported by the Spanish Government-MINECO through ‘‘Severo Ochoa” (SEV-2016-0683), MAT2017-82288-C2-1-P (AEI/FEDER, UE) and RTI2018-101033-B-I00 (MCIU/AEI/FEDER, UE), and by Generalitat Valenciana through AICO/2019/060. JRD and YR-L thank the U.S. Department of Energy, Office of Basic Energy Sciences under Award No. DE-SC0016214 for support. ARF acknowledges the Spanish Government-MINECO for a FPU scholarship (FPU2017/01521). The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ferrierite and Its Delaminated and Silica-Intercalated Forms Modified with Copper as Eective Catalysts for NH3-SCR Process

  • Swies, Aneta
  • Kowalczyk, Andrzej
  • Rutkowska, Małgorzata
  • Díaz Morales, Urbano
  • Palomares Gimeno, Antonio Eduardo
  • Chmielarz, Lucjan
The main goal of the study was the development of eective catalysts for the low-temperature selective catalytic reduction of NO with ammonia (NH3-SCR), based on ferrierite (FER) and its delaminated (ITQ-6) and silica-intercalated (ITQ-36) forms modified with copper. The copper exchange zeolitic samples, with the intended framework Si/Al ratio of 30 and 50, were synthetized and characterized with respect to their chemical composition (ICP-OES), structure (XRD), texture (low-temperature N2 adsorption), form and aggregation of deposited copper species (UV-vis-DRS), surface acidity (NH3-TPD) and reducibility (H2-TPR). The samples of the Cu-ITQ-6 and Cu-ITQ-36 series were found to be significantly more active NH3-SCR catalysts compared to Cu-FER. The activity of these catalysts in low-temperature NH3-SCR was assigned to the significant contribution of highly dispersed copper species (monomeric cations and small oligomeric species) catalytically active in the oxidation of NO to NO2, which is necessary for fast-SCR. The zeolitic catalysts, with the higher framework alumina content, were more eective in high-temperature NH3-SCR due to their limited catalytic activity in the side reaction of ammonia oxidation., The studies financed by National Science Centre–Poland [2016/21/B/ST5/00242]. A.´S. has been partly supported by the EU Project POWR.03.02.00-00-I004/16. U.D. acknowledges the Spanish Government for the funding [MAT2017-82288-C2-1-P]. Part of the research was done with equipment purchased in the frame of European Regional Development Fund (Polish Innovation Economy Operational Program (POIG.02.01.00-12-023/08)).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modification of MCM-22 Zeolite and Its Derivatives with Iron for the Application in N2O Decomposition

  • Rutkowska, Małgorzata
  • Jankowsk, Aleksandra
  • Rózycka-Dudek, Ewelina
  • Dubiel, Wiktoria
  • Kowalczyk, Andrzej
  • Piwowarska, Zofia
  • Llopis, Sebastián
  • Díaz Morales, Urbano
  • Chmielarz, Lucjan
Layered 2D zeolite MCM-22 and its delaminated derivative, ITQ-2, were modified with iron, by different methods (ion-exchange and direct synthesis), and with the use of different precursors (FeSO4.7H2O, Fe(NO3)3.9H2O, and [Fe3(OCOCH3)7.OH.2H2O]NO3 oligocations. The applied modifications were aimed at optimization of iron form in the samples (aggregation, amount, location, and reducibility), in order to achieve the highest catalytic activity in the N2O decomposition. The synthesis of the samples was verified with the use of XRD (X-Ray Diffraction), N2-sorption and ICP-OES (Inductively Coupled Plasma Optical Emission Spectroscopy) techniques, while the form of iron in the samples was investigated byUV¿vis-DRS (UV¿vis diffuse reflectance spectroscopy),H2-TPR (Hydrogen Temperature-Programmed Reduction) and HRTEM (High-Resolution Transmission Electron Microscopy). The highest activity in the N2O decomposition presented the sample Fe(O,IE)MCM-22, prepared by ion-exchange of MCM-22 with Fe3(III) oligocations. This activity was related to the oligomeric FexOy species (the main form of iron in the sample) and the higher loading of active species (in comparison to the modification with FeSO4.7H2O)., This work was carried out in the frame of project No. 0670/IP3/2016/74, from the Polish Ministry of Science and Higher Education, in the years 2016–2019. Part of the work was performed in the frame of project No. 2012/05/B/ST5/00269, from the National Science Centre (Poland). U.D. acknowledges the Spanish Government for funding (MAT2017-82288-C2-1-P).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Visible-Light-Driven Photocatalytic Coupling of Benzylamine over Titanium-Based MIL-125-NH2Metal-Organic Framework: A Mechanistic Study

  • Vitillo, J.G.
  • Presti, D.
  • Luz, Ignacio
  • Llabrés i Xamena, Francesc X.
  • Bordiga, S.
Imines are important building blocks in organic chemistry. Titanium-based metal-organic framework (MOF) MIL-125-NH(Ti) can photocatalyze, under visible light and at room temperature, the selective aerobic oxidation of benzylamine to N-benzylidenebenzylamine. We investigated the reaction mechanism using catalytic tests, ex situ infrared spectroscopy, and density functional calculations. In the dark, the presence of MIL-125-NH(Ti) alone does not improve the reaction yield with respect to a blank experiment. This poor catalytic performance in the dark is associated with the absence of polarizing species on the MOF surface, as confirmed by acetonitrile adsorption. Excitation with different spectral regions evidenced the determinant role of the 450 < λ < 385 nm range for catalyst photoactivation. The calculations show that the last step of the reaction would have an energy barrier of 206 kJ molin anhydrous conditions, while it decreases to 88 kJ molonly if the mechanism is mediated by two water molecules., Financial support by the Spanish Government is acknowledged through projects MAT2017-82288-C2-1-P and the Severo Ochoa program (SEV-2016-0683). We further thank Bartolomeo Civalleri for the kind help with the calculations and Diego Pellerej for experimental assistance.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ferrierite and Its Delaminated Forms Modified with Copper as Efective Catalysts for NH3-SCO Process

  • Swies, Aneta
  • Rutkowska, Małgorzata
  • Kowalczyk, Andrzej
  • Díaz Morales, Urbano
  • Palomares Gimeno, Antonio Eduardo
  • Chmielarz, Lucjan
Ferrierites and their delaminated forms (ITQ-6), containing aluminum or titanium in the zeolite framework, were synthetized and modified with copper by an ion-exchange method. The obtained samples were characterized with respect to their chemical composition (ICP-OES), structure (XRD, UV-Vis DRS), textural parameters (N2-sorption), surface acidity (NH3-TPD), form and reducibility of deposited copper species (UV-Vis DRS and H2-TPR). Ferrierites and delaminated ITQ-6 zeolites modified with copper were studied as catalysts for the selective catalytic oxidation of ammonia to dinitrogen (NH3-SCO). It was shown that aggregated copper oxide species, which were preferentially formed on Ti-zeolites, were catalytically active in direct low-temperature ammonia oxidation to NO, while copper introduced into Al-zeolites was present mainly in the form of monomeric copper cations catalytically active in selective reduction of NO by ammonia to dinitrogen. It was postulated that ammonia oxidation in the presence of the studied catalysts proceeds according to the internal-selective catalytic reduction mechanism (i-SCR) and therefore the suitable ratio between aggregated copper oxide species and monomeric copper cations is necessary to obtain active and selective catalysts for the NH3-SCO process. Cu/Al-ITQ-6 presented the best catalytic properties possibly due to the most optimal ratio of these copper species., The studies financed by National Science Centre–Poland [2016/21/B/ST5/00242]. A.´S. has been partly supported by the EU Project POWR.03.02.00-00-I004/16. U.D. acknowledges the Spanish Government for the funding [MAT2017-82288-C2-1-P]. Part of the research was done with equipment purchased in the frame of European Regional Development Fund (Polish Innovation Economy Operational Program (POIG.02.01.00-12-023/08)).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Conversion of levulinic acid to γ-valerolactone over Zr-containing metal-organic frameworks: Evidencing the role of Lewis and Brønsted acid sites

  • Guarinos, J.M.
  • Cirujano, F.G.
  • Rapeyko, Anastasia
  • Llabrés i Xamena, Francesc X.
Zr-containing UiO-66 and MOF-808 are evaluated for converting levulinic acid (LA) into γ-valerolactone (GVL) through various routes: (i) Step-wise esterification of LA to n-butyl levulinate (nBuL) and Meerwein-Ponndorf-Verley (MPV) reduction to GVL; (ii) One-pot two-steps esterification with n-butanol followed by MPV reduction with sec-butanol; and (iii) direct conversion of LA into GVL through a tandem reaction. Selection of this multistep complex reaction evidences the participation of the different acid sites (Lewis or Brønsted) of the material in each individual step: Brønsted-induced acid sites catalyze esterification reaction efficiently, while Lewis acid sites are the preferred sites for the MPV step. Sulfation of MOF-808 is used to enhance the Brønsted acidity of MOF-808, which improves the performance for esterification. However, the sulfate groups introduced are detrimental for the MPV step, since they reduce the intra-pore space available to form the required bulky transition state. These results evidence the need to find the best equilibrium between Brønsted and Lewis acid sites to optimize the outcome of this multistep reaction., Financial support by the Spanish Government is acknowledged through projects MAT2017-82288-C2-1-P and the Severo Ochoa program (SEV-2016-0683). Aula-CEMEX is also acknowledged for a fellowship to JMG., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design and Synthesis of the Active Site Environment in Zeolite Catalysts for Selectively Manipulating Mechanistic Pathways

  • Li, Chengeng
  • Ferri, Pau
  • Paris Carrizo, Cecilia Gertrudis
  • Moliner Marín, Manuel
  • Boronat, Mercedes
  • Corma, Avelino
By combining kinetics and theoretical calculations, we show here the benefits of going beyond the concept of static localized and defined active sites on solid catalysts, into a system that globally and dynamically considers the active site located in an environment that involves a scaffold structure particularly suited for a target reaction. We demonstrate that such a system is able to direct the reaction through a preferred mechanism when two of them are competing. This is illustrated here for an industrially relevant reaction, the diethylbenzene-benzene transalkylation. The zeolite catalyst (ITQ-27) optimizes location, density, and environment of acid sites to drive the reaction through the preselected and preferred diaryl-mediated mechanism, instead of the alkyl transfer pathway. This is achieved by minimizing the activation energy of the selected pathway through weak interactions, much in the way that it occurs in enzymatic catalysts. We show that ITQ-27 outperforms previously reported zeolites for the DEB-Bz transalkylation and, more specifically, industrially relevant zeolites such as faujasite, beta, and mordenite., This work was supported by the European Union through ERC-AdG-2014-671093 (SynCatMatch), Spanish Government through “Severo Ochoa” (SEV-2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE) and RTI2018-101033-B-I00 (MCIU/AEI/FEDER, UE), and by Generalitat Valenciana through AICO/2019/060. T
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Limits of the Confinement Effect Associated to Cage Topology on the Control of the MTO Selectivity

  • Ferri, Pau
  • Li, Chengeng
  • Paris Carrizo, Cecilia Gertrudis
  • Rodríguez-Fernández, Aída
  • Moliner Marín, Manuel
  • Boronat, Mercedes
  • Corma, Avelino
The light olefin product distribution of the methanol-to-olefin (MTO) reaction catalyzed by acid zeolites and zeotypes depends on the nature of the entrapped hydrocarbon pool species that act as co-catalysts. The preferential stabilization by confinement effects of the cationic intermediates involved in the side-chain or paring pathways of the aromatics-based cycle of the MTO mechanism in small-pore cage-based zeolites is determined by the topology of the cavity, and can be quantitatively described through the E parameter obtained from DFT calculations. In this work we extend the study of the E parameter to a wide range of structures (ERI, LEV, AEI, CHA, DDR, AFX, RTH, ITE, SAV, UFI, RHO, KFI, and LTA) and discuss its applicability in small cages with steric constraints to host bulky intermediates, in zeolites with a tight fitting between the cavity and the hosted cations, and in large cages where confinement effects are lost in part and competitive processes occur., This work has been supported by the European Union through ERC-AdG-2014-671093 (SynCatMatch), Spanish Government through ‘‘Severo Ochoa” (SEV-2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE) and RTI2018-101033-B−I00 (MCIU/AEI/FEDER, UE), and by Generalitat Valenciana through AICO/2019/060. A.R.F. acknowledges the Spanish Government-MINECO for a FPU scholarship (FPU2017/01521).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Deciphering the photobehaviour of ensemble and single crystals of Zr-based ITQ MOF composites

  • Caballero-Mancebo, Elena
  • Moreno, José M.
  • Corma, Avelino
  • Díaz Morales, Urbano
  • Cohen, Boiko
  • Douhal, Abderrazzak
Understanding the interactions that govern the photophysical behaviour of Metal-organic frameworks (MOFs) and their composites is paramount for their photochemical and photonic applications. In this work, we report on the photobehaviour of Nile Red (NR) adsorbed on the surface of 2D Zr-ITQ-HB (NR@Zr-ITQ-HB) MOF using ultrafast (fs-ns) and single-molecule fluorescence techniques. The results show the occurrence of energy transfer processes happening in 0.34 ns between neighbouring NR molecules, intramolecular charge transfer reaction (∼0.6 ps) and a vibrational cooling (10 ps) of the adsorbed dye. Time-resolved single-composite fluorescence microscopy experiments on different NR-loaded composites allowed to resolve the emission from adsorbed aggregates (0.9 ns) and from the charge separated state (2.5 ns) of excited NR. The different photobehaviour of NR adsorbed on ZrO nanoparticles indicates the relevance of the Zr-ITQ-HB MOFs surface to the observed photoinduced reactions in the composites. We discuss how the nature of both, the organic linkers and metal clusters in this kind of MOFs, affects the photodynamics of the composites. These results may help in designing MOFs “on demand” for their application in photons-based science and technology, like photocatalysis and lighting., This work was supported by MINECO through projects MAT2017-86532-R, and MAT2017- 82288-C2-1-P, and by the JCCM through project SBPLY/19/180501/000212. J.M.M. thanks the predoctoral fellowship from the Severo Ochoa program for support (SEV-2016-0683), and E.C.-M thanks the MINECO for the FPI fellowship (BES- 2015-071495)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure and reactive properties of Nb-impregnated two-dimensional pillared MWW zeolites for total oxidation of volatile organic compounds

  • Schwanke, Anderson Joel
  • Balzer, Rosana
  • Lopes, Christian W.
  • Meira, Debora M.
  • Díaz Morales, Urbano
  • Pergher, Sibele
  • Bernardo-Gusmão, K.
In this work, the structure and reactive properties of niobium (Nb)-impregnated MWW-type materials were evaluated for gas-phase total oxidation of volatile organic compounds, including BTX (benzene, toluene and o -xylene). The role of the type of structure (two or three-dimensional) and the loading of Nb were considered. The results indicated most Nb species with a tetrahedral coordination on the external surfaces of both two- and three-dimensional zeolites, together with a minimal contribution of octahedral extra-framework NbO species. The texture and Nb content played a key role in the gas-phase total oxidation of BTX. With the same Nb content (5 wt%), the pillared zeolite exhibited a higher specific surface, larger pore volume and mesopores between the MWW nanosheets when compared to the MCM-22 zeolites, which resulted in high accessibility of the reactant molecules to the active sites, reflected in higher BTX conversion at lower and higher temperatures (50–300 °C). The best performance was achieved with the pillared zeolite (10 wt% Nb), reaching a BTX conversion at 300 °C of 92%, 69% and 58%, respectively. The catalyst was stable for up to 30 h of reaction., A.J.S. thanks the Cordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES, Brazil; Finance Code 001) and the Programa de Pós-Graduação em Química of the Universidade Federal do Rio Grande do Sul (PPGQ-UFRGS). C.W.L. thanks the PRH 50.1 – ANP/FINEP Human Resources Program for the Visiting Researcher Fellowship. This research used resources of the Advanced Photon Source, a user facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory, and was supported by the U.S. DOE under Contract No. DE-AC02-06CH11357 and by the Canadian Light Source and its funding partners. U.D thanks the MAT2017-82288-C2-1-P Project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Active Base Hybrid Organosilica Materials based on Pyrrolidine Builder Units for Fine Chemicals Production

  • Llopis, Sebastián
  • Velty, Alexandra Isabelle Lucienne
  • Díaz Morales, Urbano
The catalytic activity of “pyrrolidine type” fragments included or anchored in the mesoporous silica supports or polymeric frameworks have been fully reported for enantioselective transformation. Nevertheless, low attention was focused on their catalytic abilities to perform base-catalyzed reaction. Accordingly, hybrid materials including pyrrolidine fragments in the mesoporous silica supports were prepared following different synthesis methods, such as micellar and fluoride sol-gel routes in absence of structural directing agents. Their great catalytic performance was explored for various base-catalyzed reactions to the formation of C−C bond through Knoevenagel, Claisen-Schmidt and Henry condensations under microwave irradiation. The benefits of microwave irradiation combined with suitable catalytic properties of pyrrolidine hybrid materials with strong base sites and high accessibility to active centers, allowed carrying out successfully base-catalyzed condensation reactions for the production of fine chemicals. Moreover, the hybrid catalyst exhibited high selectivity and good stability over different catalytic cycles contributing to environmental sustainability., The authors are grateful for financial support from the Spanish Government, MAT2017-82288-C2-1-P and PID2020-112590GB−C21/AEI/10.13039/501100011033, and MULTY2HYCAT European project (EUHorizon 2020 funded project under grant agreement no. 720783).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Titanium-silicon ferrierites and their delaminated forms modified with copper as effective catalysts for low-temperature NH3-SCR

  • Swies, Aneta
  • Kowalczyk, Andrzej
  • Michalik, M.
  • Díaz Morales, Urbano
  • Palomares Gimeno, Antonio Eduardo
  • Chmielarz, Lucjan
Titanium-silicon ferrierites with different Si/Ti ratios and their delaminated forms were modified with copper by ion-exchange. The obtained samples were characterized with respect to their chemical composition (ICP-OES), structure (XRD), texture (Nsorption), morphology (SEM), form and aggregation of titanium and copper species (UV-vis-DRS), reducibility of deposited copper species (H-TPR) and surface acidity (NH-TPD). The porous structure of the zeolitic samples strongly influenced the form and aggregation of deposited copper species. In the case of the three dimensional microporous structure of ferrierites (Ti-FER), copper was deposited mainly in the form of aggregated copper oxide species, in contrast to the open micro- and mesoporous structure of delaminated ferrierites (Ti-ITQ-6), where mainly copper in the form of monomeric cations was identified. It was shown that monomeric copper cations are more catalytically active in NO to NOoxidation than aggregated copper oxide species and, therefore, for the low-temperature conversion of nitrogen oxides the fast SCR reaction pathway is more effective for delaminated ferrierites modified with copper (Cu-Ti-ITQ-6) than for microporous three dimensional ferrierite catalysts (Cu-Ti-FER)., The studies financed by National Science Centre – Poland [2016/21/B/ST5/00242]. A. Ś. has been partly supported by the EU Project POWR.03.02.00-00-I004/16. U. D. acknowledges to the Spanish Government by the funding [MAT2017-82288-C2-1-P]. Part of the research was done with equipment purchased in the frame of European Regional Development Fund (Polish Innovation Economy Operational Program [POIG.02.01.00-12-023/08]).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrogenation of substituted nitroaromatics on non-noble metal catalysts: Mechanistic insights to improve selectivity

  • Millán, Reisel
  • Boronat, Mercedes
The mechanism of nitrobenzene hydrogenation on non-noble metals such as Ni is different from that previously reported for noble metals like Pt. The newly proposed pathway involves the initial dissociation of the two N-O bonds of nitrobenzene (Ph-NO2 → Ph-NO → Ph-N), leading to partial oxidation of the catalyst surface, followed by two successive hydrogenation steps (Ph-N → Ph-NH → Ph-NH2) that finally produce the functionalized aniline. Due to the oxophilic nature of non-noble metals like Ni, Co or Cu, the hydrogenation of the Ph-N intermediate and the removal of O in the form of water become the most energy demanding steps of the process. The strength of the interaction of O, H and N with different metals, and the preferential mode of adsorption of nitroarenes on clean and partially oxidized systems obtained from DFT calculations, are now used to propose an efficient non-noble metal catalyst that optimizes activity and selectivity. This journal is, This work has been supported by the Spanish Government through the “Severo Ochoa” program (SEV-2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE) and by Generalitat Valenciana through AICO/2017/153 Project. Computations were performed on the Tirant III cluster of the Servei d’Informàtica of the University of Valencia (SIUV). Red Española de Supercomputación (RES) and SIUV are gratefully acknowledged for computational resources and technical support. R. M. acknowledges “La Caixa – Severo Ochoa” International PhD Fellowships (call 2015)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Regioirregular and catalytic Mizoroki–Heck reactions

  • Garnes-Portolés, F.
  • Greco, R.
  • Oliver Meseguer, Judit
  • Castellanos-Soriano, Jorge
  • Jiménez, M. Consuelo
  • Lopez-Haro, Miguel
  • Hernández-Garrido, J.C.
  • Boronat, Mercedes
  • Pérez-Ruiz, Raúl
  • Leyva, Antonio
The palladium-catalysed cross-coupling reaction between alkenes and aryl halides (the Mizoroki–Heck reaction) is a powerful methodology to construct new carbon–carbon bonds. However, the success of this reaction is in part hampered by an extremely marked regioselectivity on the double bond, which dictates that electron-poor alkenes react exclusively on the β-carbon. Here, we show that ligand-free, few-atom palladium clusters in solution catalyse the α-selective intramolecular Mizoroki–Heck coupling of iodoaryl cinnamates, and mechanistic studies support the formation of a sterically encumbered cinnamate–palladium cluster intermediate. Following this rationale, the α-selective intermolecular coupling of aryl iodides with styrenes is also achieved with palladium clusters encapsulated within fine-tuned and sterically restricted zeolite cavities to produce 1,1-bisarylethylenes, which are further engaged with aryl halides by a metal-free photoredox-catalysed coupling. These ligand-free methodologies significantly expand the chemical space of the Mizoroki–Heck coupling. [Figure not available: see fulltext.], This work was supported by MINECO (Spain, projects CTQ 2017-86735-P, PID2019-105391GB-C22 and MAT2017-82288-C2-1-P, Severo Ochoa programme SEV-2016-0683 and the Juan de la Cierva programme). F.G.-P. and R.G. thank ITQ for the concession of a contract. J.O.-M. acknowledges the Juan de la Cierva programme for the concession of a contract, and R.P.-R. and J.C.-S. thank the Plan GenT programme (CIDEGENT/2018/044) funded by Generalitat Valenciana. HR STEM measurements were performed at DME-UCA in Cadiz University, with financial support from FEDER/MINECO (PID2019-110018GA-I00 and PID2019-107578GA-I00). We acknowledge ALBA Synchrotron for allocating beamtime and CLÆSS beamline staff for their technical support during our experiment., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In-Situ-Generated Active Hf-hydride in Zeolites for the Tandem N-Alkylation of Amines with Benzyl Alcohol

  • Rojas-Buzo, Sergio
  • Concepción, Patricia
  • Corma, Avelino
  • Moliner Marín, Manuel
  • Boronat, Mercedes
In this work, we have studied the catalytic activity of different silicates (MFI, MCM-41, and Beta) containing Lewis acid sites (including Sn, Ti, Zr, and Hf) for the tandem N-alkylation reaction of aniline with benzyl alcohol. The Hf- and Zr-Beta were the most active catalysts for this transformation, showing in both cases selectivities toward the corresponding N-benzylaniline higher than 97%. FTIR and DFT analyses confirm that the active sites in the Hf-Beta catalyst for this process are the open sites where one of the four Hf-O bonds is hydrolyzed. Moreover, the amount of these active species could be notoriously increased with previous thermal treatment of the Lewis acid zeolite with benzyl alcohol. Isotopically labeled experiments and theoretical mechanistic studies reveal that the N-alkylation reaction occurs through a hydrogen borrowing pathway, in which in situ Hf-hydride species were generated. Finally, the Hf-Beta zeolite was reused several times in the N-alkylation reaction without any appreciable deactivation detected. This catalytic system could be expanded to a variety of amines, including aliphatic and biomass-derived amines., This work has been supported by the Spanish Government through “severo Ochoa” (SEV-2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE), and RTI2018-101033-B-I00 (MCIU/AEI/FEDER, UE). Dr. Susana Valencia is acknowledged for the preparation of the Ti-Beta sample. The Electron Microscopy Service of the UPV is also acknowledged for their help in sample characterization. Part of the computations were performed on the Tirant III cluster of the Servei d’Informàtica of the University of Valencia.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring Lewis/Brønsted acid properties of MOF nodesviahydrothermal and solvothermal synthesis: simple approach with exceptional catalytic implications

  • Rojas-Buzo, Sergio
  • Bohigues, Benjamin
  • Lopes, Christian W.
  • Meira, Debora M.
  • Boronat, Mercedes
  • Moliner Marín, Manuel
  • Corma, Avelino
The Lewis/Brønsted catalytic properties of the Metal-Organic Framework (MOF) nodes can be tuned by simply controlling the solvent employed in the synthetic procedure. In this work, we demonstrate that Hf-MOF-808 can be prepared from a material with a higher amount of Brønsted acid sites,viamodulated hydrothermal synthesis, to a material with a higher proportion of unsaturated Hf Lewis acid sites,viamodulated solvothermal synthesis. The Lewis/Brønsted acid properties of the resultant metallic clusters have been studied by different characterization techniques, including XAS, FTIR and NMR spectroscopies, combined with a DFT study. The different nature of the Hf-MOF-808 materials allows their application as selective catalysts in different target reactions requiring Lewis, Brønsted or Lewis-Brønsted acid pairs., This work has been supported by the Spanish Government through the “Severo Ochoa” (SEV-2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE) and RTI2018-101033-B-I00 (MCIU/AEI/FEDER, UE). J. M. Salas is acknowledged for his contribution to CD3CN-FTIR experiments. C. W. L. thanks the PRH 50.1 – ANP/FINEP Human Resources Program for the Visiting Researcher Fellowship. This research used resources of the Advanced Photon Source, a user facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory, and was supported by the U.S. DOE under Contract No. DE-AC02-06CH11357 and by the Canadian Light Source and its funding partners. The Electron Microscopy Service of the UPV is also acknowledged for their help in sample characterization.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combined spectroscopic and computational study of nitrobenzene activation on non-noble metals-based mono-and bimetallic catalysts

  • Millán, Reisel
  • Soriano, M.D.
  • Cerdá Moreno, Cristina
  • Boronat, Mercedes
  • Concepción, Patricia
In this paper, substituted anilines are industrially obtained by direct hydrogenation of nitroaromatic compounds with molecular H2 using metals as catalysts. Previous theoretical studies proposed that the mechanism of the reaction depends on the nature of the metal used as a catalyst, and that rationally designed bimetallic materials might show improved catalytic performance. Herein, we present IR spectroscopic studies of nitrobenzene interactions with monometallic Ni/SiO2, Cu/SiO2 and Pd/SiO2, and with bimetallic CuNi/SiO2 and CuPd/SiO2 catalysts, both in the absence and presence of H2, combined with density functional theory (DFT) calculations on selected bime-tallic NiCu(111) and PdCu(111) models. The results obtained experimentally confirm that the reaction mechanism on non-noble metals such as Ni proceeds through N-O bond dissociation, generat-ing nitrosobenzene intermediates, while, on noble metals, such as Pd, H-attack is necessary to acti-vate the NO bond. Moreover, a bimetallic CuPd/SiO2 catalyst with a Pd enriched surface is prepared that exhibits an enhanced H2 dissociation ability and a particular reactivity at the boundary between the two metals., This research was funded by Spanish Government through “Severo Ochoa” program (SEV- 2016-0683, MINECO), MAT2017-82288-C2-1-P (AEI/FEDER, UE), RTI2018-099668-B-C21 (MINECO) and by Generalitat Valenciana through AICO/2017/153 Project.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

One-Step Chemo-, Regio- and Stereoselective Reduction of Ketosteroids to Hydroxysteroids over Zr-Containing MOF-808 Metal-Organic Frameworks

  • Mautschke, Hans-Hilmar
  • Llabrés i Xamena, Francesc X.
Zr-containing MOF-808 is a very promising heterogeneous catalyst for the selective reduction of ketosteroids to the corresponding hydroxysteroids through a Meerwein-Ponndorf-Verley (MPV) reaction. Interestingly, the process leads to the diastereoselective synthesis of elusive 17α-hydroxy derivatives in one step, whereas most chemical and biological transformations produce the 17β-OH compounds, or they require several additional steps to convert 17β-OH into 17α-OH by inverting the configuration of the 17 center. Moreover, MOF-808 is found to be stable and reusable; it is also chemoselective (only keto groups are reduced, even in the presence of other reducible groups such as C=C bonds) and regioselective (in 3,17-diketosteroids only the keto group in position 17 is reduced, while the 3-keto group remains almost intact). The kinetic rate constant and thermodynamic parameters of estrone reduction to estradiol have been obtained by a detailed temperature-dependent kinetic analysis. The results evidence a major contribution of the entropic term, thus suggesting that the diastereoselectivity of the process is controlled by the confinement of the reaction inside the MOF cavities, where the Zr active sites are located., Financial support by the Spanish Government is acknowledged through projects MAT2017-82288-C2-1-P and the Severo Ochoa program (SEV-2016-0683). The Microscopy Service of the Universitat Politècnica de València is gratefully acknowledged for the electron microscopy images.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mobility and Reactivity of Cu+ Species in Cu-CHA Catalysts under NH3-SCR-NOx Reaction Conditions: Insights from AIMD Simulations

  • Millán, Reisel
  • Cnudde, Pieter
  • van Speybroeck, Veronique
  • Boronat, Mercedes
The mobility of the copper cations acting as active sites for the selective catalytic reduction of nitrogen oxides with ammonia in Cu-CHA catalysts varies with temperature and feed composition. Herein, the migration of [Cu(NH3)2]+ complexes between two adjacent cavities of the chabazite structure, including other reactant molecules (NO, O2, H2O, and NH3), in the initial and final cavities is investigated using ab initio molecular dynamics (AIMD) simulations combined with enhanced sampling techniques to describe hopping events from one cage to the other. We find that such diffusion is only significantly hindered by the presence of excess NH3 or NO in the initial cavity, since both reactants form with [Cu(NH3)2]+ stable intermediates which are too bulky to cross the 8-ring windows connecting the cavities. The presence of O2 modifies strongly the interaction of NO with Cu+. At low temperatures, we observe NO detachment from Cu+ and increased mobility of the [Cu(NH3)2]+ complex, while at high temperatures, NO reacts spontaneously with O2 to form NO2. The present simulations give evidence for recent experimental observations, namely, an NH3 inhibition effect on the SCR reaction at low temperatures, and transport limitations of NO and NH3 at high temperatures. Our first principle simulations mimicking operating conditions support the existence of two different reaction mechanisms operating at low and high temperatures, the former involving dimeric Cu(NH3)2-O2-Cu(NH3)2 species and the latter occurring by direct NO oxidation to NO2 in one single cavity., This work has been supported by the Spanish Government through Severo Ochoa (SEV-2016-0683, MINECO), and MAT2017-82288-C2-1-P (AEI/FEDER, UE) projects, and by CSIC through the i-link+ program (LINKA20381). We thankfully acknowledge Red Española de Supercomputación (RES) and Servei d’Informàtica de la Universitat de València (SIUV) for computational resources and technical support, the computer resources at Marenostrum4 (RES-QS-2020-1-0029 and RES-QS.2020-2-0015) and the technical support provided by BSC. R.M. thanks ITQ for his contract. V.V.S, P.C. acknowledge funding from the European Union’s Horizon 2020 research and innovation program (consolidator ERC grant agreement No. 647755 - DYNPOR (2015-2020)). V.V.S. acknowledges the Research Board of the Ghent University (BOF). Part of the computational resources and services used were provided by Ghent University (Stevin Supercomputer Infrastructure), the VSC (Flemish Supercomputer Center), funded by the Research Foundation - Flanders (FWO)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Porous Silica-Based Organic-Inorganic Hybrid Catalysts: A Review

  • Erigoni, Andrea
  • Díaz Morales, Urbano
Hybrid organic-inorganic catalysts have been extensively investigated by several research groups in the last decades, as they allow combining the structural robust-ness of inorganic solids with the versatility of organic chemistry. Within the field of hybrid catalysts, synthetic strategies based on silica are among the most exploitable, due to the convenience of sol-gel chemistry, to the array of silylderivative precursors that can be synthesized and to the number of post-synthetic functionalization strategies available, amongst others. This review proposes to highlight these advantages, firstly describing the most common synthetic tools and the chemistry behind sol-gel syntheses of hybrid catalysts, then presenting exemplificative studies involving mono- and multi-functional silica-based hybrid catalysts featuring different types of active sites (acid, base, redox). Materials obtained through different approaches are described and their properties, as well as their catalytic performances, are compared. The general scope of this review is to gather useful information for those approaching the synthesis of organic-inorganic hybrid materials, while providing an overview on the state-of-the art in the synthesis of such materials and highlighting their capacities., This research was funded by Spanish Government (MAT2017-82288-C2-1-P and Severo Ochoa Excellence Program SEV-2016-0683) and MULTY2HYCAT (EU-Horizon 2020 funded project under grant agreement no. 720783)., Peer reviewed