Pasar al contenido principal

SISTEMAS RADIANTES “X-WAVE” INTEGRADAS DE COMUNICACIONES Y SENSORIZACION

PID2019-107885GB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 29
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Vehicular mm-Wave Array for Smart Handover

  • Bharath Reddy, G.
  • Ramirez, G. A.
  • Molins-Benlliure, Jaime
  • Romeu, J.
  • Jofre-R., L.
  • Ferrando Bataller, Miguel|||0000-0003-3561-5112
[EN] The emergence of new technologies such as autonomous vehicles and high data rate 5G networks requires advanced antenna types that are capable of fulfilling requirements for highly demanding wireless communication links. The array of microstrip-fed slot-coupled patches is one such type of antenna that provides low return loss and good transient behaviour for broadband applications. A compact size slot-coupled patch antenna subarray and its phased array is proposed in this paper. Two different substrates Rogers TMM4 and Green TapeTM 951 Low Temperature Co-Fired Ceramic (LTCC) are considered for the fabrication of microstrip feedline. The feedline is fabricated on the respective substrates and then mounted on a Rogers RT/duroid 5880 laminate. Ground planes are used on both the front and backside of the antenna array. The antenna is operating in a range of 24.25 GHz - 29.5 GHz. A Smart Array is proposed in this paper which has a good performance in terms of antenna gain and scanning property for 5G application in Smart handovers., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects TEC2016-78028-C3-1- P, PID 2019-107885GB-C31, MDM2016-0600, and Catalan Research Group 2017 SGR 219.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

M-Port rotationally symmetric antennas for advanced MIMO applications

  • Aldana Alonso, Rubén
  • Molins Benlliure, Jaime
  • Akazzim, Youness|||0000-0002-7957-4044
  • Llanga Vargas, Anibal
  • Jofre Cruanyes, Marc|||0000-0002-8912-6595
  • Cabedo Fabrés, Marta
  • Antonino Daviu, Eva
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Ferrando Bataller, Miguel
  • Jofre Roca, Lluís|||0000-0002-0547-901X
Multiple-input multiple-output (MIMO) technology has emerged as a highly promising solution for wireless communication, offering an opportunity to overcome the limitations of traffic capacity in high-speed broadband wireless network access. By utilizing multiple antennas at both the transmitting and receiving Sub-6GHz ends, the MIMO system enhances the efficiency and performance of wireless communication systems [1]. This work presents a comparison of the performance of two families of M-Rotationally Symmetrical MIMO antenna design approaches one based on the Magneto Electric (ME) dipole antenna and a second one based on the Circular Cavity principle intended for their use into advanced MIMO applications like Orthogonal Angular Momentum (OAM) and high capacity channels. A comparison of the relevant performance parameters in terms of frequency bandwidth (both input impedance 𝑺𝒊𝒊 and inter-port isolation 𝑺𝒊j) and radiation pattern are presented for the two Sub-6GHz prototypes., This work was financially supported by PDR-20142022/56-30157-2021-2A grant of the Generalitat de Catalunya and by CICYT PID2019-107885GB-C31, PID2019107885GB-C32, PID2022-136869NB-C31, PID2022136869NB-C33, and Prueba de Concepto PDC2022, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Low-Profile UWB probe for precise time-domain functional imaging

  • Akazzim, Youness|||0000-0002-7957-4044
  • El Mrabet, Otman
  • Jofre Roca, Lluís|||0000-0002-0547-901X
In this paper a Double Ridge Waveguide (DRW) antenna fed by a microstrip line covering a frequency band from 0.5GHz to 2.5GHz is designed, fabricated, and measured, for functional microwave imaging. The proposed DRW antenna is used as the probe element in a collateral multi-static system to detect a cylindrical target located inside a human brain liquid medium. Also, an approach for the spatial reconstruction accuracy based on maximum time resolution is presented. Measured and simulated results are conducted and discussed., This work was financially supported by CICYT PID2019- 107885GB-C31, MDM2016-0600, and support grants for university departments and research units (FI-SDUR)(2021 FISDU 00195). This work was supported by the National Center for Scientific and Technological Research (CNRST) under grant number PPR2/2015/36., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Microwave resonant wireless sensor for enhanced particle detection in microfluidic channels

  • Ataa-Allah, Houda
  • Ataa Allah, Fatima
  • Palacios Arias, César Augusto|||0000-0003-1298-8434
  • Aznabet, Mariem
  • El mrabet, Otman
  • Jofre Cruanyes, Marc|||0000-0002-8912-6595
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Jofre Roca, Lluís|||0000-0002-0547-901X
This paper presents a highly sensitive microwave sensor for bioparticle detection, designed around a ring-gap resonator integrated with a microfluidic channel. The sensor’s structure is optimized to enhance electric field confinement, improving its sensitivity to dielectric variations. Experimental validation using commercial microbeads as bioparticle models demonstrates clear resonance shifts, confirming the sensor’s capability for precise detection of particles up to 5 µm. These results highlight the potential of the proposed approach for realtime, label-free biosensing applications, offering a promising tool for biomedical diagnostics and analytical chemistry., This work was supported in part by the Generalitat de Catalunya and European Regional Development Fund (FEDER) under Grant PDR-2014-2022/56-30157-2021-2A, Grant 2021 SGR 01415 Q0818003F, and Grant Metropolis PLEC2021-007609; in part by the Agencia Estatal de Investigación, Spain, under Grant CICYT PID2019- 107885GBC31, Grant PID2022-136869NB-C31, and Grant Prueba de Concepto PDC2022-133091-I00; and in part by the Next Generation EU. Additionally, this work is supported by the CNRST as part of the ”PhD-Associate Scholarship – PASS” Program., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

MIMO radar antenna with sectorial human torso illumination for an in-cabin breathing detection system

  • López Montero, María José|||0000-0002-2286-7479
  • Palacios Arias, César Augusto|||0000-0003-1298-8434
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Jofre Roca, Lluís|||0000-0002-0547-901X
The vital sign measurement systems inside vehicles have taken great or impulse in recent years, and the technologies that have been most welcomed are based on wireless measurements that do not interrupt driving and are imperceptible to the driver. There are disorders in breathing patterns, which include the movement of different regions of the human thorax mainly. In this sense, the objective of this paper is to determine the dimensions of a lens-based antenna system and the pointing angles of the radiation main lobe of the six antenna-elements to measure the elongation of six regions of the human torso and determine breathing patterns. The pointing angle is controlled by the position of the antenna behind the lens, and the beamwidth of the lobe depends on the directivity achieved by the antenna. An electronic system to simulate torso elongation is also presented to calibrate and test the sensitivity of the system., This work was supported by the Spanish “Comisión Interministerial de Ciencia y Tecnologia” (CICYT) under projects PID2019-107885GB-C31 and MDM2016-O6OO; Catalan Research Group 2017 SGR 219; and ”Secretaría Nacional de Educación Superior, Ciencia, Tecnología e Innovación” (SENESCYT) from the Ecuadorian government., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Improvements in randomized matrix compression methods for numerical analysis of antennas and scatterers

  • López Menchón, Héctor|||0000-0001-5776-1423
  • Heldring, Alexander|||0000-0003-2011-2096
  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
We propose a randomized Pseudo Skeleton (or CUR) Approximation method to compress the H-matrices of linear systems that arise in the discretization of integral equations in electromagnetic scattering. This method is highly parellelizable and well suited for fine-granularity architectures as GPUs. As the Adaptive Approximation Method (ACA), the method is purely algebraic. The method is tested with standard cases to assess its quality and efficiency, This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects PID2019-107885GBC31 / AEI / 10.13039/501100011033, PID2020-113832RBC21 / AEI / 10.13039/501100011033 and PID-2020-118410RB-C21 / AEI / 10.13039/501100011033, PDC2022-133091-I00 / AEI / 10.13039/501100011033, and Catalan Research Group 2017 SGR 219 and grant 2021 FI B2 00096., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Microwave monitoring of Parkinson disease using a realistic human head model

  • Akazzim, Youness|||0000-0002-7957-4044
  • Gugliermino, Martina
  • Rodríguez Duarte, David Orlando
  • Tobón Vásquez, Jorge Alberto
  • Vipiana, Francesca
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Jofre Roca, Lluís|||0000-0002-0547-901X
Parkinson's disease (PD) is a widespread neurode-generative disorder characterized by the loss of dopaminergic neurons from the substantia nigra, causing bradykinesia, tremors, rigidity, and postural instability. In this paper, we present a differential microwave imaging study (MWI) for early-stage PD monitoring that uses the dielectric properties of the basal ganglia, particularly the thalamus. The simulations are carried out using two scenarios: one is based on studying the sensitivity of a realistic human head model. The other is the study of differential microwave imaging to monitor the PD based on the dopamine level changes in the basal ganglia. The MWI system contains 24 printed flexible antennas with a custom-made matching medium covering the head model. The obtained results demonstrate that small variations in dielectric properties within the human head, in particular the thalamus, can be detected, which can be used to monitor Parkinson's disease in a very early stage., This work was financially supported in part by CICYT PID2019-107885GB-C31, PID2022-136869NB-C31, 2021 SGR 01415, Metropolis PLEC2021-007609, (FI-SDUR)(2021 FISDU 00195), PDR-2014-2022/56-30157-2021-2 A grant of the Generalitat de Catalunya, and Prueba de Concepto PDC2022-133091-I00 grants of the Ministerio de Ciencia, Innovacion y Universidades (Spain). This work was supported in part by the project PON Research and Innovation “Microwave Imaging and Detection powered by Artificial Intelligence for Medical and Industrial Applications (DM 1062/21)”, funded by MUR. It was carried out partially within the Agritech National Research Center, funded by the Next-Generation EU (PNRR, Missione 4, Componente 2, Investimento 1.4, D.D. 1032 17/06/2022, CN00000022., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Simple randomized strategies for low-rank matrix compression

  • López Menchón, Héctor|||0000-0001-5776-1423
  • Molina Burgués, Robert|||0009-0005-1314-3742
  • Heldring, Alexander|||0000-0003-2011-2096
  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
We propose a randomized Pseudo Skeleton (or CUR) approximation method to compress the H-matrices of linear systems that arise in the discretization of integral equations in electromagnetic scattering. This method is essentially the Matrix Decomposition Algorithm (MDA) of Michielssen and Boag (1994) with equivalent basis and testing functions equal to a random subset of the original ones. It is highly parellelizable and well suited for fine-granularity architectures as GPUs. As the Adaptive Cross Approximation (ACA), CUR is purely algebraic. The method is tested with standard cases to assess its quality and efficiency., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects PID2019-107885GBC31 / AEI / 10.13039/501100011033, PID2022-136869NBC31 / AEI / 10.13039/501100011033, PID2020-113832RBC21 / AEI / 10.13039/501100011033 and PID-2020-118410RB-C21 / AEI / 10.13039/501100011033, PDC2022-133091-I00 / AEI / 10.13039/501100011033, and Catalan Research Group 2017 SGR 219 and grant 2021 FI B2 00096., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Solving electromagnetic scattering in dielectric bodies by Monte Carlo sampling

  • López Menchón, Héctor|||0000-0001-5776-1423
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Heldring, Alexander|||0000-0003-2011-2096
In this work, we propose Monte Carlo sampling as a technique to avoid communication overhead in the numerical solution of complex electromagnetic scattering problems. The method is based on statistically sampling a formal representation of the solution of the scattering problem, based on a modified Born series. The sampling process can be independently carried out in different processors with no need for communication between them. This lack of communication makes the algorithm suitable for massively parallel computational environments., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects PID2019-107885GB-C31 / AEI / 10.13039/501100011033, PID2020-113832RB- C21 / AEI / 10.13039/501100011033 and TEC2017- 84817-C2-2-R / AEI / 10.13039/501100011033 and the Unidad de Excelencia Maria de Maeztu MDM-2016- 0600/AEI/10.13039/501100011033, which is financed by the Agencia Estatal de Investigaci ´on, Spain, and Catalan Research Group 2017 SGR 219, and Ag`encia de Gesti ´o d’Ajuts Uni- versitaris i de Recerca with grant 2021 FI B2 00096., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Efficient analysis of thick curved metal sheets

  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
The scattering analysis of perfectly conducting plates with the method-of-moment discretization of the Electric-Field Integral Equation has been traditionally carried out according to the thin-sheet approximation, which neglects the current contributions over the plate rims. The plate is then modelled as an open surface and handles a restricted number of unknowns as compared with the canonical modelling as a closed object. The thin-sheet approximation, although used in many practical applications, becomes inaccurate for thick enough plates or plates under plane wave incidence at grazing angles. Recently, a thick-plate approach has been presented to address the time-efficient and accurate scattering analysis of thick plates. This scheme exploits the symmetry properties of fields and currents thereby giving rise to two uncoupled problems with roughly half the number of unknowns of the original problem. In this paper, we extend this thick-plate scheme to the efficient scattering analysis of thick curved sheets., This work was supported by FEDER and the "Spanish Plan Estatal de Investigación Científica y Técnica y de Innovación", under projects: TEC2017-84817-C2-2-R/ AEI/10.13039/501100011033, TEC2016-78028-C3-1-P/AEI/10.13039/501100011033, PID2019-107885GB-C31/AEI/10.13039/501100011033 and the Unidad de Excelencia Maria de Maeztu MDM-2016-0600/AEI/10.13039/501100011033, which is financed by the Agencia Estatal de Investigación, Spain, and Catalan Research Group 2017 SGR 219., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Resonance-based microwave monitoring of live/dead bacteria in a microfluidic channel

  • Ataa-Allah, Houda
  • Aznabet, Mariem
  • Palacios Arias, César Augusto|||0000-0003-1298-8434
  • Akazzim, Youness|||0000-0002-7957-4044
  • El mrabet, Otman
  • Jofre Cruanyes, Marc|||0000-0002-8912-6595
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Jofre Roca, Lluís|||0000-0002-0547-901X
In this work, we have studied a highly sensitive microwave sensor for the detection of Escherichia coli (E. coli) bacteria at the single-cell level. The proposed system integrates a microwave sensor with a microfluidic channel for bacteria flow control. The microwave sensor is based on a planar microwave annular ring resonator working around 5GHz. Inside the channel, E. coli bacteria have been modeled using dielectric characteristics present in state-of-the-art literature. To enhance field confinement and achieve the highest electric field strength we have introduced two 50um gaps into the resonator. This approach holds great potential for different applications, including food safety control, healthcare diagnosis, and environmental monitoring, where the ability to detect a single E. coli cell is paramount., This work was financially supported in part by ID2019- 107885GBC31, PID2022-136869NB-C31, 2021 SGR 01415, Metropolis PLEC2021-007609, (FI-SDUR) (2021 FISDU 00195), PDR-2014- 2022/56-30157-2021-2 Generalitat de Catalunya, and Prueba de Concepto PDC2022-133091-I00 Ministerio de Ciencia, Innovacion y Universidades (Spain)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Magnetoelectric dipole antenna extending NLOS short-distance vehicular communication with orbital angular momentum modes

  • Jofre Cruanyes, Marc|||0000-0002-8912-6595
  • Akazzim, Youness|||0000-0002-7957-4044
  • Towfiq, Asaduzzaman
  • Cetiner, Bedri Artug
  • Blanch Boris, Sebastián|||0000-0002-8757-583X
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Jofre Roca, Lluís|||0000-0002-0547-901X
The ability to utilize resources to meet the need of growing diversity in services and user behavior marks the future of cognitive wireless communication systems. Cognitive wireless technologies for vehicular communications, in combination with Orbital Angular Momentum (OAM) modes aim at extending direct Non-Line-Of-Sight (NLOS) short-distance communications for smart mobility. In this regard, OAM antennas need to be developed to support these technologies. To this end, here we describe a compact antenna supporting the first OAM modes. Also, the antenna properties are discussed and are numerically and experimentally validated for OAM modes of l=±1 . Particularly, for the considered OAM modes, the antenna achieves more than 500 MHz operation bandwidth at the frequency of operation of 3.5 GHz. Also, for l=±1 OAM modes, the null beamwidth aligns precisely with the anticipated dimensions theoretically computed., This work was financially supported by PDR-2014-2022/56-30157-2021-2A grant of the Generalitat de Catalunya and by CICYT PID2019-107885GB-C31, PID2022-136869NB-C31 and Prueba de Concepto PDC2022-133091-I00 and Metropolis PLEC2021-007609 grants of the Ministerio de Ciencia, Inno-vación y Universidades (Spain).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Preliminary phantom-based dynamic calibration techniques assessment for microwave colonoscopy systems

  • Garrido Atienza, Alejandra|||0000-0003-1371-8962
  • Dghoughi, Walid
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Guardiola Garcia, Marta
Early detection and resection of colon polyp is the best way to reduce colorectal cancer (CRC) mortality. The current method for early detection is colonoscopy, which has a limited field of view, and its efficacy is highly dependant on the endoscopist's experience and colon preparation. This work presents a device for combining microwave imaging with optical colonoscopy. The challenges of this new microwave imaging system are presented, such as the unknown distance to the colon mucosa, which leads to undesired scattered fields and, the antenna size limitations. Four dynamic calibration techniques are proposed to remove the effects of the undefined distance from the imaging region to colon mucosa. These calibration methods are based on averaging the colonoscopy trajectory frames and subtracting the calibration set from the current frame. The phantom preliminary results show that these calibration methods completely delete the undesired scatter., A.G. acknowledges the financial support from DIN2019- 010857, M.G., and W.D acknowledge the financial support from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 960251 and from the European Institute of Innovation and Technology (EIT). J.R. acknowledges the financial support from Agencia Estatal Investigacion PID2019-107885GB-C31/AEI/10.13039/., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Characterization of THz radiation by collimated wavefront aperture raster scanning

  • Nuño Gómez, Daniel-Juan|||0000-0002-2418-6351
  • Santos Blanco, M. Concepción|||0000-0002-5103-5356
  • Gomez Diaz, J. Sebastian
  • Romeu Robert, Jordi|||0000-0003-0197-5961
  • Jofre Roca, Lluís|||0000-0002-0547-901X
We present measurements for characterization of the beam profile and polarization pattern of lens-coupled photoconductive antennas (PCAs) at THz frequencies using a setup with antennas at fixed positions and a movable aperture placed in between collimating THz lenses. The measured beam patterns for co-polar and cross-polar components reveal the expected Airy disc and quadrupole behavior, respectively. The temporal evolution of the polarization in the directions of maximum cross-polar component follows a single-cycle circle with opposite handedness at each side of the antennas line-of-sight (LOS). Results are consistent with those obtained with fiber-coupled movable antennas, while enjoying the simplicity of a free-space laser-PCA feed which does not require painstaking laser realignment for each beam direction measure., This work was partly funded by the Ministerio de Economía y Competitividad under projects TEC2016-78028-C3-1-P, PID 2019-107885GB-C31 and MDM2016-0600, and Catalan Research Group 2017 SGR 219., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Optical beam steering network with multiband capability

  • Vega, Sara
  • Nuño Gómez, Daniel-Juan|||0000-0002-2418-6351
  • Santos Blanco, M. Concepción|||0000-0002-5103-5356
A multiwavelength (MW) optical true time delay Network (OTTDN) to feed a phased array antenna (PAA) is presented. Beam steering capabilities can be demonstrated when applying MW tuning. A Dual Electrode Mach Zehnder Modulator (DE-MZM) as radio frequency (RF) external modulating stage allows to tune the operative band avoiding severe Chromatic Dispersion (CD) fading to obtain a flattened response. A working example simulation of a 4 elements array at 8 GHz shows the RF multiband spectral flat response potential of the technique, as well as the network conditions needed for beam steering with free-lobe operation., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects TEC2016-78028-C3-1- P, PID 2019-107885GB-C31, MDM2016-0600, and Catalan Research Group 2017 SGR 219., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Improvements in randomized matrix compression methods for numerical analysis of antennas and scatterers

  • López Menchón, Héctor
  • Heldring, Alexander
  • Úbeda Farré, Eduard
  • Rius Casals, Juan Manuel
We propose a randomized Pseudo Skeleton (or CUR) Approximation method to compress the H-matrices of linear systems that arise in the discretization of integral equations in electromagnetic scattering. This method is highly parellelizable and well suited for fine-granularity architectures as GPUs. As the Adaptive Approximation Method (ACA), the method is purely algebraic. The method is tested with standard cases to assess its quality and efficiency, This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects PID2019-107885GBC31 / AEI / 10.13039/501100011033, PID2020-113832RBC21 / AEI / 10.13039/501100011033 and PID-2020-118410RB-C21 / AEI / 10.13039/501100011033, PDC2022-133091-I00 / AEI / 10.13039/501100011033, and Catalan Research Group 2017 SGR 219 and grant 2021 FI B2 00096., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

MIMO radar antenna with sectorial human torso illumination for an in-cabin breathing detection system

  • López Montero, María José
  • Palacios Arias, César Augusto
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
The vital sign measurement systems inside vehicles have taken great or impulse in recent years, and the technologies that have been most welcomed are based on wireless measurements that do not interrupt driving and are imperceptible to the driver. There are disorders in breathing patterns, which include the movement of different regions of the human thorax mainly. In this sense, the objective of this paper is to determine the dimensions of a lens-based antenna system and the pointing angles of the radiation main lobe of the six antenna-elements to measure the elongation of six regions of the human torso and determine breathing patterns. The pointing angle is controlled by the position of the antenna behind the lens, and the beamwidth of the lobe depends on the directivity achieved by the antenna. An electronic system to simulate torso elongation is also presented to calibrate and test the sensitivity of the system., This work was supported by the Spanish “Comisión Interministerial de Ciencia y Tecnologia” (CICYT) under projects PID2019-107885GB-C31 and MDM2016-O6OO; Catalan Research Group 2017 SGR 219; and ”Secretaría Nacional de Educación Superior, Ciencia, Tecnología e Innovación” (SENESCYT) from the Ecuadorian government., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Simple randomized strategies for low-rank matrix compression

  • López Menchón, Héctor
  • Molina Burgués, Robert
  • Heldring, Alexander
  • Úbeda Farré, Eduard
  • Rius Casals, Juan Manuel
We propose a randomized Pseudo Skeleton (or CUR) approximation method to compress the H-matrices of linear systems that arise in the discretization of integral equations in electromagnetic scattering. This method is essentially the Matrix Decomposition Algorithm (MDA) of Michielssen and Boag (1994) with equivalent basis and testing functions equal to a random subset of the original ones. It is highly parellelizable and well suited for fine-granularity architectures as GPUs. As the Adaptive Cross Approximation (ACA), CUR is purely algebraic. The method is tested with standard cases to assess its quality and efficiency., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects PID2019-107885GBC31 / AEI / 10.13039/501100011033, PID2022-136869NBC31 / AEI / 10.13039/501100011033, PID2020-113832RBC21 / AEI / 10.13039/501100011033 and PID-2020-118410RB-C21 / AEI / 10.13039/501100011033, PDC2022-133091-I00 / AEI / 10.13039/501100011033, and Catalan Research Group 2017 SGR 219 and grant 2021 FI B2 00096., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Low-Profile UWB probe for precise time-domain functional imaging

  • Akazzim, Youness
  • El Mrabet, Otman
  • Jofre Roca, Lluís
In this paper a Double Ridge Waveguide (DRW) antenna fed by a microstrip line covering a frequency band from 0.5GHz to 2.5GHz is designed, fabricated, and measured, for functional microwave imaging. The proposed DRW antenna is used as the probe element in a collateral multi-static system to detect a cylindrical target located inside a human brain liquid medium. Also, an approach for the spatial reconstruction accuracy based on maximum time resolution is presented. Measured and simulated results are conducted and discussed., This work was financially supported by CICYT PID2019- 107885GB-C31, MDM2016-0600, and support grants for university departments and research units (FI-SDUR)(2021 FISDU 00195). This work was supported by the National Center for Scientific and Technological Research (CNRST) under grant number PPR2/2015/36., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Microwave monitoring of Parkinson disease using a realistic human head model

  • Akazzim, Youness
  • Gugliermino, Martina
  • Rodríguez Duarte, David Orlando
  • Tobón Vásquez, Jorge Alberto
  • Vipiana, Francesca
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
Parkinson's disease (PD) is a widespread neurode-generative disorder characterized by the loss of dopaminergic neurons from the substantia nigra, causing bradykinesia, tremors, rigidity, and postural instability. In this paper, we present a differential microwave imaging study (MWI) for early-stage PD monitoring that uses the dielectric properties of the basal ganglia, particularly the thalamus. The simulations are carried out using two scenarios: one is based on studying the sensitivity of a realistic human head model. The other is the study of differential microwave imaging to monitor the PD based on the dopamine level changes in the basal ganglia. The MWI system contains 24 printed flexible antennas with a custom-made matching medium covering the head model. The obtained results demonstrate that small variations in dielectric properties within the human head, in particular the thalamus, can be detected, which can be used to monitor Parkinson's disease in a very early stage., This work was financially supported in part by CICYT PID2019-107885GB-C31, PID2022-136869NB-C31, 2021 SGR 01415, Metropolis PLEC2021-007609, (FI-SDUR)(2021 FISDU 00195), PDR-2014-2022/56-30157-2021-2 A grant of the Generalitat de Catalunya, and Prueba de Concepto PDC2022-133091-I00 grants of the Ministerio de Ciencia, Innovacion y Universidades (Spain). This work was supported in part by the project PON Research and Innovation “Microwave Imaging and Detection powered by Artificial Intelligence for Medical and Industrial Applications (DM 1062/21)”, funded by MUR. It was carried out partially within the Agritech National Research Center, funded by the Next-Generation EU (PNRR, Missione 4, Componente 2, Investimento 1.4, D.D. 1032 17/06/2022, CN00000022., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Optical beam steering network with multiband capability

  • Vega, Sara
  • Nuño Gómez, Daniel-Juan
  • Santos Blanco, M. Concepción
A multiwavelength (MW) optical true time delay Network (OTTDN) to feed a phased array antenna (PAA) is presented. Beam steering capabilities can be demonstrated when applying MW tuning. A Dual Electrode Mach Zehnder Modulator (DE-MZM) as radio frequency (RF) external modulating stage allows to tune the operative band avoiding severe Chromatic Dispersion (CD) fading to obtain a flattened response. A working example simulation of a 4 elements array at 8 GHz shows the RF multiband spectral flat response potential of the technique, as well as the network conditions needed for beam steering with free-lobe operation., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects TEC2016-78028-C3-1- P, PID 2019-107885GB-C31, MDM2016-0600, and Catalan Research Group 2017 SGR 219., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Magnetoelectric dipole antenna extending NLOS short-distance vehicular communication with orbital angular momentum modes

  • Jofre Cruanyes, Marc
  • Akazzim, Youness
  • Towfiq, Asaduzzaman
  • Cetiner, Bedri Artug
  • Blanch Boris, Sebastián
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
The ability to utilize resources to meet the need of growing diversity in services and user behavior marks the future of cognitive wireless communication systems. Cognitive wireless technologies for vehicular communications, in combination with Orbital Angular Momentum (OAM) modes aim at extending direct Non-Line-Of-Sight (NLOS) short-distance communications for smart mobility. In this regard, OAM antennas need to be developed to support these technologies. To this end, here we describe a compact antenna supporting the first OAM modes. Also, the antenna properties are discussed and are numerically and experimentally validated for OAM modes of l=±1 . Particularly, for the considered OAM modes, the antenna achieves more than 500 MHz operation bandwidth at the frequency of operation of 3.5 GHz. Also, for l=±1 OAM modes, the null beamwidth aligns precisely with the anticipated dimensions theoretically computed., This work was financially supported by PDR-2014-2022/56-30157-2021-2A grant of the Generalitat de Catalunya and by CICYT PID2019-107885GB-C31, PID2022-136869NB-C31 and Prueba de Concepto PDC2022-133091-I00 and Metropolis PLEC2021-007609 grants of the Ministerio de Ciencia, Inno-vación y Universidades (Spain)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Solving electromagnetic scattering in dielectric bodies by Monte Carlo sampling

  • López Menchón, Héctor
  • Rius Casals, Juan Manuel
  • Úbeda Farré, Eduard
  • Heldring, Alexander
In this work, we propose Monte Carlo sampling as a technique to avoid communication overhead in the numerical solution of complex electromagnetic scattering problems. The method is based on statistically sampling a formal representation of the solution of the scattering problem, based on a modified Born series. The sampling process can be independently carried out in different processors with no need for communication between them. This lack of communication makes the algorithm suitable for massively parallel computational environments., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects PID2019-107885GB-C31 / AEI / 10.13039/501100011033, PID2020-113832RB- C21 / AEI / 10.13039/501100011033 and TEC2017- 84817-C2-2-R / AEI / 10.13039/501100011033 and the Unidad de Excelencia Maria de Maeztu MDM-2016- 0600/AEI/10.13039/501100011033, which is financed by the Agencia Estatal de Investigaci ´on, Spain, and Catalan Research Group 2017 SGR 219, and Ag`encia de Gesti ´o d’Ajuts Uni- versitaris i de Recerca with grant 2021 FI B2 00096., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Characterization of THz radiation by collimated wavefront aperture raster scanning

  • Nuño Gómez, Daniel-Juan
  • Santos Blanco, M. Concepción
  • Gomez Diaz, J. Sebastian
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
We present measurements for characterization of the beam profile and polarization pattern of lens-coupled photoconductive antennas (PCAs) at THz frequencies using a setup with antennas at fixed positions and a movable aperture placed in between collimating THz lenses. The measured beam patterns for co-polar and cross-polar components reveal the expected Airy disc and quadrupole behavior, respectively. The temporal evolution of the polarization in the directions of maximum cross-polar component follows a single-cycle circle with opposite handedness at each side of the antennas line-of-sight (LOS). Results are consistent with those obtained with fiber-coupled movable antennas, while enjoying the simplicity of a free-space laser-PCA feed which does not require painstaking laser realignment for each beam direction measure., This work was partly funded by the Ministerio de Economía y Competitividad under projects TEC2016-78028-C3-1-P, PID 2019-107885GB-C31 and MDM2016-0600, and Catalan Research Group 2017 SGR 219., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

M-Port rotationally symmetric antennas for advanced MIMO applications

  • Aldana Alonso, Rubén
  • Molins Benlliure, Jaime
  • Akazzim, Youness
  • Llanga Vargas, Anibal
  • Jofre Cruanyes, Marc
  • Cabedo Fabrés, Marta
  • Antonino Daviu, Eva
  • Romeu Robert, Jordi
  • Ferrando Bataller, Miguel
  • Jofre Roca, Lluís
Multiple-input multiple-output (MIMO) technology has emerged as a highly promising solution for wireless communication, offering an opportunity to overcome the limitations of traffic capacity in high-speed broadband wireless network access. By utilizing multiple antennas at both the transmitting and receiving Sub-6GHz ends, the MIMO system enhances the efficiency and performance of wireless communication systems [1]. This work presents a comparison of the performance of two families of M-Rotationally Symmetrical MIMO antenna design approaches one based on the Magneto Electric (ME) dipole antenna and a second one based on the Circular Cavity principle intended for their use into advanced MIMO applications like Orthogonal Angular Momentum (OAM) and high capacity channels. A comparison of the relevant performance parameters in terms of frequency bandwidth (both input impedance 𝑺𝒊𝒊 and inter-port isolation 𝑺𝒊j) and radiation pattern are presented for the two Sub-6GHz prototypes., This work was financially supported by PDR-20142022/56-30157-2021-2A grant of the Generalitat de Catalunya and by CICYT PID2019-107885GB-C31, PID2019107885GB-C32, PID2022-136869NB-C31, PID2022136869NB-C33, and Prueba de Concepto PDC2022, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Efficient analysis of thick curved metal sheets

  • Úbeda Farré, Eduard
  • Rius Casals, Juan Manuel
The scattering analysis of perfectly conducting plates with the method-of-moment discretization of the Electric-Field Integral Equation has been traditionally carried out according to the thin-sheet approximation, which neglects the current contributions over the plate rims. The plate is then modelled as an open surface and handles a restricted number of unknowns as compared with the canonical modelling as a closed object. The thin-sheet approximation, although used in many practical applications, becomes inaccurate for thick enough plates or plates under plane wave incidence at grazing angles. Recently, a thick-plate approach has been presented to address the time-efficient and accurate scattering analysis of thick plates. This scheme exploits the symmetry properties of fields and currents thereby giving rise to two uncoupled problems with roughly half the number of unknowns of the original problem. In this paper, we extend this thick-plate scheme to the efficient scattering analysis of thick curved sheets., This work was supported by FEDER and the "Spanish Plan Estatal de Investigación Científica y Técnica y de Innovación", under projects: TEC2017-84817-C2-2-R/ AEI/10.13039/501100011033, TEC2016-78028-C3-1-P/AEI/10.13039/501100011033, PID2019-107885GB-C31/AEI/10.13039/501100011033 and the Unidad de Excelencia Maria de Maeztu MDM-2016-0600/AEI/10.13039/501100011033, which is financed by the Agencia Estatal de Investigación, Spain, and Catalan Research Group 2017 SGR 219., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Preliminary phantom-based dynamic calibration techniques assessment for microwave colonoscopy systems

  • Garrido Atienza, Alejandra
  • Dghoughi, Walid
  • Romeu Robert, Jordi
  • Guardiola Garcia, Marta
Early detection and resection of colon polyp is the best way to reduce colorectal cancer (CRC) mortality. The current method for early detection is colonoscopy, which has a limited field of view, and its efficacy is highly dependant on the endoscopist's experience and colon preparation. This work presents a device for combining microwave imaging with optical colonoscopy. The challenges of this new microwave imaging system are presented, such as the unknown distance to the colon mucosa, which leads to undesired scattered fields and, the antenna size limitations. Four dynamic calibration techniques are proposed to remove the effects of the undefined distance from the imaging region to colon mucosa. These calibration methods are based on averaging the colonoscopy trajectory frames and subtracting the calibration set from the current frame. The phantom preliminary results show that these calibration methods completely delete the undesired scatter., A.G. acknowledges the financial support from DIN2019- 010857, M.G., and W.D acknowledge the financial support from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 960251 and from the European Institute of Innovation and Technology (EIT). J.R. acknowledges the financial support from Agencia Estatal Investigacion PID2019-107885GB-C31/AEI/10.13039/., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Microwave resonant wireless sensor for enhanced particle detection in microfluidic channels

  • Ataa-Allah, Houda
  • Ataa Allah, Fatima
  • Palacios Arias, César Augusto
  • Aznabet, Mariem
  • El mrabet, Otman
  • Jofre Cruanyes, Marc
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
This paper presents a highly sensitive microwave sensor for bioparticle detection, designed around a ring-gap resonator integrated with a microfluidic channel. The sensor’s structure is optimized to enhance electric field confinement, improving its sensitivity to dielectric variations. Experimental validation using commercial microbeads as bioparticle models demonstrates clear resonance shifts, confirming the sensor’s capability for precise detection of particles up to 5 µm. These results highlight the potential of the proposed approach for realtime, label-free biosensing applications, offering a promising tool for biomedical diagnostics and analytical chemistry., This work was supported in part by the Generalitat de Catalunya and European Regional Development Fund (FEDER) under Grant PDR-2014-2022/56-30157-2021-2A, Grant 2021 SGR 01415 Q0818003F, and Grant Metropolis PLEC2021-007609; in part by the Agencia Estatal de Investigación, Spain, under Grant CICYT PID2019- 107885GBC31, Grant PID2022-136869NB-C31, and Grant Prueba de Concepto PDC2022-133091-I00; and in part by the Next Generation EU. Additionally, this work is supported by the CNRST as part of the ”PhD-Associate Scholarship – PASS” Program., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Resonance-based microwave monitoring of live/dead bacteria in a microfluidic channel

  • Ataa-Allah, Houda
  • Aznabet, Mariem
  • Palacios Arias, César Augusto
  • Akazzim, Youness
  • El mrabet, Otman
  • Jofre Cruanyes, Marc
  • Romeu Robert, Jordi
  • Jofre Roca, Lluís
In this work, we have studied a highly sensitive microwave sensor for the detection of Escherichia coli (E. coli) bacteria at the single-cell level. The proposed system integrates a microwave sensor with a microfluidic channel for bacteria flow control. The microwave sensor is based on a planar microwave annular ring resonator working around 5GHz. Inside the channel, E. coli bacteria have been modeled using dielectric characteristics present in state-of-the-art literature. To enhance field confinement and achieve the highest electric field strength we have introduced two 50um gaps into the resonator. This approach holds great potential for different applications, including food safety control, healthcare diagnosis, and environmental monitoring, where the ability to detect a single E. coli cell is paramount., This work was financially supported in part by ID2019- 107885GBC31, PID2022-136869NB-C31, 2021 SGR 01415, Metropolis PLEC2021-007609, (FI-SDUR) (2021 FISDU 00195), PDR-2014- 2022/56-30157-2021-2 Generalitat de Catalunya, and Prueba de Concepto PDC2022-133091-I00 Ministerio de Ciencia, Innovacion y Universidades (Spain)., Peer Reviewed, Postprint (published version)