Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 33
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Electrostatic interaction between SARS-CoV-2 and charged surfaces: Spike protein evolution changed the game

  • Domingo, Marc
  • Guzmán, Horacio
  • Kanduc, Matej
  • Faraudo, Jordi
Previous works show a key role of electrostatics for the SARS-CoV-2 virus in aspects such as virus-cell interactions or virus inactivation by ionic surfactants. Electrostatic interactions depend strongly on the variant since the charge of the Spike protein (responsible for virus - environment interactions) evolved across the variants from the highly negative Wild Type (WT) to the highly positive Omicron variant. The distribution of the charge also evolved from diffuse to highly localized. These facts suggest that SARS-CoV-2 should interact strongly with charged surfaces in a way that changed during the virus evolution. This question is studied here by computing the electrostatic interaction between WT, Delta and Omicron Spike proteins with charged surfaces using a new method (based on Debye-Huckel theory) that provides efficiently general results as a function of the surface charge density σ. We found that the interaction of the WT and Delta variant spikes with charged surfaces is dominated by repulsive image forces proportional to σ2 originated at the protein/water interface. On the contrary, the Omicron variant shows a distinct behaviour, being strongly attracted to negatively charged surfaces and repelled from positively charged ones. Therefore, the SARS-CoV-2 virus has evolved from being repelled by charged surfaces to being efficiently adsorbing to negatively charged ones., This work was supported by Grant No. PID2021-124297NB-C33 funded by MICIU/AEI/ 10.13039/501100011033, the “Severo Ochoa” Grant No. CEX2023-001263-S for Centers of Excellence awarded to ICMAB, and the FPI under Grant No. PRE2020-093689 awarded to M.D.We also thank the Government of Catalonia (AGAUR) under Grant No. 2021SGR01519. H.V.G. acknowledges financial support from the Maria Zambrano Grant No. CA6/RSUE/2022- 00108 and Ramon y Cajal grant No. RYC2022-038082-I. M.K. acknowledges financial support from the Slovenian Research and Innovation Agency ARIS (contracts P1-0055 and J1-4382). We thank the CESGA supercomputing center for computer time and technical support at the Finisterrae supercomputer. We thank Dr. Fiona L. Kearns (UCSD) for discussions regarding the spike protein structures. M.D. is enrolled in the Material Sciences Ph.D. program of the Universitat Aut`onoma de Barcelona., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Seeing ferroelectric phase transitions

  • Fina, Ignasi
  • Sánchez Barrera, Florencio
Real-time atomic-scale imaging reveals the presence of reversible transitions between ferroelectric and non-ferroelectric phases during electric stimuli, enabling the possibility for reliability improvement in ferroelectric materials compatible with complementary metal–oxide–semiconductors., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Twisto-photonics in two-dimensional materials: A comprehensive review

  • Zhou, Renlong
  • Habib, Muhammad
  • Iqbal, Muhammad Faisal
  • Hussain, Naveed
  • Farooq, Sajid
  • Haleem, Yasir A.
  • Ali, Faizan
  • Ullah, Kaleem
Twisted two-dimensional materials (t2DMs) such as graphene and black phosphorus are transforming the field of photonics, serving as a promising platform for the development of advanced devices that manipulate light. These materials possess multiple photonic properties that are determined by their twist angles. This article explores the profound impact of twist angles on various photonic phenomena, including nonlinear optical responses, optical absorption, plasmonics, and the influence of chirality in t2DMs. We delve into cutting-edge developments explained through Raman spectroscopy and the intriguing world of moiré excitons, as revealed through photoluminescence studies. As we explore device applications, we highlight groundbreaking advancements in photodetection, with a brief look into emerging technologies such as single-photon detectors, ultrafast modulators, light-emitting diodes, and interlayer exciton lasers. Our study extends to depict the promising future of t2DMs, emphasizing their prospective integration with other photonic systems and the discovery of novel optical phenomena in the domain of photonics. This review serves as a comprehensive guide to the dynamic field of photonics in t2DMs, highlighting current achievements and future prospects., The authors acknowledge the support provided by the Guangdong Basic and Applied Basic Research Foundation (2020A1515110488) and the Scientific Key Research Fund of Guangdong Provincial Education Department (2019KZDXM061, 2019KQNCX099, 2020ZDZX2059, 2021ZDZX1038)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

2024 roadmap for sustainable batteries

  • Titirici, Magda
  • Johansson, Patrik
  • Crespo Ribadeneyra, Maria
  • Au, Heather
  • Innocenti, Alessandro
  • Passerini, Stefano
  • Petavratzi, Evi
  • Lusty, Paul
  • Tidblad, Annika Ahlberg
  • Naylor, Andrew J.
  • Younesi, Reza
  • Chart, Yvonne A.
  • Aspinall, Jack
  • Pasta, Mauro
  • Orive, Joseba
  • Babulal, Lakshmipriya Musuvadhi
  • Reynaud, Marine
  • Latham, Kenneth G.
  • Hosaka, Tomooki
  • Komaba, Shinichi
  • Bitenc, Jan
  • Ponrouch, Alexandre
  • Zhang, Heng
  • Armand, Michel
  • Kerr, Robert
  • Howlett, Patrick C.
  • Forsyth, Maria
  • Brown, John
  • Grimaud, Alexis
  • Vilkman, Marja
  • Dermenci, Kamil Burak
  • Mousavihashemi, Seyedabolfazl
  • Berecibar, Maitane
  • Marshall, Jean E.
  • McElroy, Con Robert
  • Kendrick, Emma
  • Safdar, Tayeba
  • Huang, Chun
  • Zanotto, Franco M.
  • Troncoso, Javier F.
  • Domínguez, Diana Zapata
  • Alabdali, Mohammed
  • Vijay, Utkarsh
  • Franco, Alejandro A.
  • Pazhaniswamy, Sivaraj
  • Grant, Patrick S.
  • López Guzman, Stiven
  • Fehse, Marcus
  • Galceran, Montserrat
  • Antuñano, Néstor
Modern batteries are highly complex devices. The cells contain many components—which in turn all have many variations, both in terms of chemistry and physical properties. A few examples: the active materials making the electrodes are coated on current collectors using solvents, binders and additives; the multicomponent electrolyte, contains salts, solvents, and additives; the electrolyte can also be a solid ceramic, polymer or a glass material; batteries also contain a separator, which can be made of glass fibres, polymeric, ceramic, composite, etc. Moving up in scale all these components are assembled in cells of different formats and geometries, coin cells and Swagelok cells for funamental testing and understanding, and pouch, prismatic and cylindrical cells for application. Given this complexity dictated by so many components and variations, there is no wonder that addressing the crucial issue of true sustainability is an extremely challenging task. How can we make sure that each component is sustainable? How can the performance can be delivered using more sustainable battery components? What actions do we need to take to address battery sustainability properly? How do we actually qualify and quantify the sustainability in the best way possible? And perhaps most importantly; how can we all work—academia and battery industry together—to enable the latter to manufacture more sustainable batteries for a truly cleaner future? This Roadmap assembles views from experts from academia, industry, research institutes, and other organisations on how we could and should achieve a more sustainable battery future. The palette has many colours: it discusses the very definition of a sustainable battery, the need for diversification beyond lithium-ion batteries (LIBs), the importance of sustainability assessments, the threat of scarcity of raw materials and the possible impact on future manufacturing of LIBs, the possibility of more sustainable cells by electrode and electrolyte chemistries as well as manufacturing, the important role of new battery chemistries, the crucial role of AI and automation in the discovery of the truly sustainable batteries of the future and the importance of developimg a circular battery economy., H A would like to thank the Faraday Institution's LiSTAR project (EP/S003053/1, Grant FIRG014) for funding. The authors acknowledge the EU's Horizon 2020 Research and Innovation Programme under Marie Skłodowska-Curie Grant Agreement 860403 'POLYSTORAGE' for the funding, as well as the Helmholtz Association basic funding. The work in this paper was funded by the UKRI Interdisciplinary Circular Economy Centre for Technology Metals (Met4Tech) (EP/V011855/1) project. This paper has been produced as an activity within Batteries Sweden (BASE), a Centre of Excellence co-funded by Sweden's Innovation Agency (Vinnova), the industry and the academy. Y A C, J A, and M P acknowledge support by the Faraday Institution [Grant Numbers FIRG056 and FIRG058]. The authors acknowledge funding from MCIN/AEI/10.13039/501100011033 through the project ION-SELF ref. PID2019-106519RB-I00, as well as the Spanish Ministerio de Industria, Comercio y Turismo and the European Union—Next Generation EU for their financial support through the project VEC-020100-2022-127/PP27. K G L acknowledges the European Research Council under the Horizon 2020 framework for the Marie Curie Research Fellowship (888124) through the project HYBRIDFLEX. The authors thank the JSPS KAKENHI (Grant Nos. JP20H02849, JP21K20561, and JP22K14772),the MEXT Program: Data Creation and Utilization Type Materials Research and Development Project (JPMXP1122712807), and JST-CREST (Grant No. JPMJCR21O6) for financial support. Funding from the European Research Council is acknowledged: ERC-2022-CoG, MULTIMETALBAT, Grant agreement No. 101089281. A P is grateful to the Spanish Agencia Estatal de Investigación Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S). J B would like to acknowledge financial support of Slovenian Research Agency through research programme P2-0423 and research Projects J2-4462 and N2-0279. The authors acknowledge the financially supported by the National Natural Science Foundation of China (Nos. 52203223 and 22279037) and the Fundamental Research Funds for Central Universities, HUST (2020kfyXJJS095). J B as a part of the DESTINY PhD programme acknowledges funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowská–Curie Grant Agreement No: 945357. The authors are grateful to the UK Faraday Institution for financial support through grant SOLBAT—next generation solid state batteries [FIRG066]. This work has received funding from the European Union's Horizon 2020 research and innovation programme under Grant Agreements 957225 (BAT4EVER) and 957202 (HIDDEN). The authors want to thank the Battery 2030+ initiative (Grant Agreement No. 957213) for enabling the collaboration. The authors would like to thank the Faraday Institution ReLiB project (Grant Codes FIRG005, FIRG027 and FIRG057) and UKRI Faraday Battery Challenge project 'Reclamation and Re-manufacture of lithium ion batteries,' Reference Number 104425 and The Faraday Institution. Manufacturing of Advanced Electrodes with Green Solvents—MAEGS, FIRG040. This work was carried out with the support of the Faraday Institution (FIRG060, FIRG066), the Faraday Institution Industry Fellowship (FIIF015), the Faraday Institution Training Grant (FITG034), the ERC Starting Grant (converted to UKRI funding EP/Y009908/1), and the Imperial College London UKRI Impact Acceleration Account (EP/X52556X/1). A A F and D Z D acknowledge the European Union's Horizon 2020 research and innovation program for the funding support through the European Research Council (Grant Agreement 772873, 'ARTISTIC' project). F M Z and A A F acknowledge the European Union's Horizon Europe research and innovation programme under Grant Agreement No. 101069686 (PULSELiON). M A, U V, and A A F as a part of the DESTINY PhD programme acknowledge funding from the European Union's Horizon2020 research and innovation programme under the Marie Skłodowska–Curie Actions COFUND—Grant Agreement No: 945357. M A and A A F also acknowledge the support of Umicore as part of DESTINY. A A F acknowledges the Institut Universitaire de France for their support. Some of the icons used in figure 23 are originated (free to use) from freepik.com. The European Union's Horizon Europe research and innovation programme is acknowledged for funding the project HighSpin (GA No. 101069508) and the associated PhD of S L., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Carborane-based BODIPY dyes: synthesis, structural analysis, photophysics and applications

  • Ordóñez Hernández, Javier
  • Giner Planas, José
  • Núñez Aguilera, Rosario
Icosahedral boron clusters-based BODIPY dyes represent a cutting-edge class of compounds that merge the unique properties of boron clusters with the exceptional fluorescence characteristics of BODIPY dyes. These kinds of molecules have garnered substantial interest due to their potential applications across various fields, mainly including optoelectronics, bioimaging, and potential use as boron carriers for Boron Neutron Capture Therapy (BNCT). Carborane clusters are known for their exceptional stability, rigid geometry, and 3D-aromaticity, while BODIPY dyes are renowned for their strong absorption, high fluorescence quantum yields, and photostability. The integration of carborane into BODIPY structures leverages the stability and versatility of carboranes while enhancing the photophysical properties of BODIPY-based fluorophores. This review explores the synthesis and structural diversity of boron clusters-based BODIPY dyes, highlighting how carborane incorporation can lead to significant changes in the electronic and optical properties of the dyes. We discuss the enhanced photophysical characteristics, such as red-shifted absorption and emission poperties, charge and electronic transfer effects, and improved cellular uptake, resulting from carborane substitution. The review also delves into the diverse applications of these compounds. In bioimaging, carborane-BODIPY dyes offer superior fluorescence properties and cellular internalization, making them ideal for cell tracking. In photodynamic therapy, (PDT) these dyes can act as potent photosensitizers capable of generating reactive oxygen species (ROS) for targeted cancer treatment making them excellent candidates for PDT. Additionally, their unique electronic properties make them suitable candidates for optoelectronic applications, including organic light-emitting diodes (OLEDs) and sensors. Overall, carborane-BODIPY dyes represent a versatile and promising class of materials with significant potential for innovation in scientific and technological applications. This review aims to provide a comprehensive overview of the current state of research on carborane-BODIPY dyes, highlighting their synthesis, properties, and broad application spectrum., The author(s) declare that financial support was received for the research, authorship, and/or publication of this article. This work was financially supported by MCIU (PID 2022-136892NB-I00) and Generalitat de Catalunya (AGAUR 2021-SGR-00442) projects. Authors acknowledge financial support from the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence (CEX 2023-001263-S). JO-H and RN want to thanks European Union´s Horizon 2022 for the Marie Sklodowska-Curie Action (MSCA) Post-doctoral Fellowship No. 101109856., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Fundamentals of Flexoelectricity, Materials and Emerging Opportunities Toward Strain-Driven Nanocatalysts

  • Kołodziej, Mieszko
  • Ojha, Niwesh
  • Budziałowski, Michał
  • Załęski, Karol
  • Fina, Ignasi
  • Mishra, Yogendra Kumar
  • Pant, Kamal Kishore
  • Coy, Emerson
Flexoelectricity, an intrinsic property observed in materials under nonuniform deformation, entails a coupling between polarization and strain gradients. Recent catalyst advancements have reignited interest in flexoelectricity, particularly at the nanoscale, where pronounced strain gradients promote robust flexoelectric effects. This paper comprehensively examines flexoelectricity, encompassing methodologies for precise measurement, elucidating its distinctions from related phenomena, and exploring its potential applications in augmenting catalytic properties. So far, the greatest potentials are based on lead strontium titanate (PST) and other metallic titanates such as titania (TiO2), strontium titanate (STO), barium strontium titanate (BST) sulfates (MoS2, ZnS) and halide perovskites (with archetype XPbI3). This review explores the promise of flexoelectric properties in addressing material and photocatalytic challenges, such as charge carrier recombination and ineffective surface charge separation. Additionally, it sheds light on the synergy with emerging paradigms like photo-flexo catalysis and synergistic flexo-piezo catalysis, specifically focusing on selective chemical transformations like green hydrogen production. Current limitations related to the usage of photoflexoelectricity for photocatalysis are mostly the stability of the used substance (susceptibility to photodegradation) or the voltage values, which represent the inferior potential for specific practical applications. This work underscores the indispensable role of flexoelectricity in catalysis and its capacity to steer future research and technological advancement., M.K. and N.O. contributed equally to this work. The authors thank the financial funding from the National Science Foundation of Poland (NCN) by the SONATA Grant UMO-2021/43/D/ST5/01116. N.O. thanks the DST Inspire Faculty Fellowship (Grant DST/INSPIRE/04/2022/002668) for financial support and the Department of Chemical Engineering Indian Institute of Technology Roorkee for hosting. Y.K.M. acknowledges the funding from the NANOCHEM (national infrastructure UFM 5229-00010B, NANOCHEM, Denmark), BHJ Fonden and Fabrikant Mads Clausen Fonden, Denmark. I.F. acknowledges the project TED2021-130453B-C21, funded by MCIN/AEI/10.13039/50110001103. The authors also thank the editors and reviewers for their constructive comments, which help the manuscript insights., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Synergistic Role of Green-Synthesized Zinc Oxide Nanomaterials in Biomedicine Applications

  • Ajmal, Hafiz Muhammad Salman
  • Muneer, Rabbia
  • Saeed, Atiqa
  • Tanveer, Muhammad
  • Saeed, Muhammad Ahsan
The substantial impact of nanotechnology on material sciences is exemplified through zinc oxide nanomaterials (ZnO NMs), which play a pivotal role in healthcare and environmental applications. This comprehensive review focuses on the eco-friendly synthesis of ZnO NMs and their cutting-edge practices in biomedical, including drug delivery, bioimaging, and anticancer therapies. Exploring environmentally responsible production techniques for ZnO NMs aims to mitigate risks associated with conventional methods, such as the use of costly and toxic precursors. In addition, these green methodologies present opportunities for generating diverse and significant morphologies. The study delves into the inhibitory effects of these NMs against microbes, cancer, and inflammation. The utilization of ZnO NMs in disease treatment and diagnosis prompts us to explore recent developments in emerging biomedical applications. Leveraging ZnO variable optical characteristics, biodegradability, inherent biocompatibility, adaptable surface chemistry, and high stability, the review covers a range of remarkable research studies for novel applications that possibly open up the potential for identifying, treating, and preventing serious human diseases., This work was supported by University of Engineering and Technology, Lahore (Pakistan) and, Kyungpook National University, Republic of Korea., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Nanofabrication for Nanophotonics

  • Yang, Younghwan
  • Jeon, Youngsun
  • Dong, Zhaogang
  • Yang, Joel K.W.
  • Haddadi Moghaddam, Mahsa
  • Kim, Dai-Sik
  • Oh, Dong Kyo
  • Lee, Jihae
  • Hentschel, Mario
  • Giessen, Harald
  • Kang, Dohyun
  • Kim, Gyeongtae
  • Tanaka, Takuo
  • Zhao, Yang
  • Bürger, Johannes
  • Maier, Stefan A.
  • Ren, Haoran
  • Jung, Wooik
  • Choi, Mansoo
  • Bae, Gwangmin
  • Chen, Haomin
  • Jeon, Seokwoo
  • Kim, Jaekyung
  • Lee, Eunji
  • Kang, Hyunjung
  • Park, Yujin
  • Du Nguyen, Dang
  • Kim, Inki
  • Cencillo-Abad, Pablo
  • Chanda, Debashis
  • Jing, Xinxin
  • Liu, Na
  • Martynenko, Irina V.
  • Liedl, Tim
  • Kwak, Yuna
  • Nam, Jwa-Min
  • Park, Sang-Min
  • Odom, Teri W.
  • Lee, Hye-Eun
  • Kim, Ryeong Myeong
  • Nam, Ki Tae
  • Kwon, Hyunah
  • Jeong, Hyeon-Ho
  • Fischer, Peer
  • Yoon, Jiwon
  • Kim, Shin-Hyun
  • Shim, Sangmin
  • Lee, Dasol
  • Pérez, Luis Alberto
  • Qi, Xiaoyu
  • Mihi, Agustín
  • Keum, Hohyun
  • Shim, Moonsub
  • Kim, Seok
  • Jang, Hanhwi
  • Jung, Yeon Sik
  • Rossner, Christian
  • König, Tobias A.F.
  • Fery, Andreas
  • Li, Zhiwei
  • Aydin, Koray
  • Mirkin, Chad A.
  • Seong, Junhwa
  • Jeon, Nara
  • Xu, Zhiyun
  • Gu, Tian
  • Hu, Juejun
  • Kwon, Hyounghan
  • Jung, Hojoong
  • Alijani, Hossein
  • Aharonovich, Igor
  • Kim, Joohoon
  • Rho, Junsuk
Nanofabrication, a pivotal technology at the intersection of nanoscale engineering and high-resolution patterning, has substantially advanced over recent decades. This technology enables the creation of nanopatterns on substrates crucial for developing nanophotonic devices and other applications in diverse fields including electronics and biosciences. Here, this mega-review comprehensively explores various facets of nanofabrication focusing on its application in nanophotonics. It delves into high-resolution techniques like focused ion beam and electron beam lithography, methods for 3D complex structure fabrication, scalable manufacturing approaches, and material compatibility considerations. Special attention is given to emerging trends such as the utilization of two-photon lithography for 3D structures and advanced materials like phase change substances and 2D materials with excitonic properties. By highlighting these advancements, the review aims to provide insights into the ongoing evolution of nanofabrication, encouraging further research and application in creating functional nanostructures. This work encapsulates critical developments and future perspectives, offering a detailed narrative on the state-of-the-art in nanofabrication tailored for both new researchers and seasoned experts in the field., This work was financially supported by the POSCO−POSTECH-RIST Convergence Research Center programfunded by POSCO, the POSTECH-Samsung SemiconductorResearch Center (IO201215-08187-01) funded by SamsungElectronics, the National Research Foundation (NRF) grants(RS-2024-00356928, RS-2024-00462912, RS-2024-00416272,RS-2024-00337012, RS-2024-00408286, RS-2024-00440004,RS-2024-00436476, RS-2022-NR066727, RS-2022-NR067559, RS-2022-NR068141, RS-2022-NR068140, RS-2019-NR040065) funded by the Ministry of Science andICT (MSIT) of the Korean government, and the KoreaPlanning & Evaluation Institute of Industrial Technology(KEIT) grant (No. 1415179744/20019169, Alchemist proj-ect) funded by the Ministry of Trade, Industry and Energy(MOTIE) of the Korean government. Section 2: Z.D. wouldlike to acknowledge the funding support from the Agency forScience, Technology and Research (A*STAR) under its AMEIRG (Project No. A20E5c0093), Career Development Awardgrant (Project No. C210112019), MTC IRG (Project No.M21K2c0116 and M22K2c0088), the Quantum EngineeringProgramme 2.0 (Award No. NRF2021-QEP2-03-P09) andDELTA-Q 2.0 (Project No. C230917005). Section 4: D.K.O.acknowledges the NRF Ph.D. fellowship (RS-2024-00414891)funded by the Ministry of Education (MOE) of the Koreangovernment, and the Korea-Switzerland young researchers’exchange program (RS-2024-00445362) funded by theMinistry of Science and ICT (MSIT) of the Koreangovernment. Section 5: This work was supported theMinisterium fü r Wissenschaft, Forschung und Kunst Baden-Wü rttemberg (RiSC Project “Mie Voids”), Vector StiftungMINT-Innovationen, and GRK2642 “Towards GraduateExperts in Photonic Quantum Technologies”). Section 6:G.K. acknowledges the Soseon Science fellowship funded byCommunity Chest of Korea, and the NRF PhD fellowship(RS-2023-00275565) funded by the MOE of the Koreangovernment. Section 9: The authors acknowledge financialsupport from the Australian Research Council DECRAFellowship DE220101085 (H.R.) and Australian ResearchCouncil Discovery Project DP220102152 (H.R., S.A.M.).S.A.M. additionally acknowledges the Lee-Lucas Chair inACS Nano www.acsnano.org Reviewhttps://doi.org/10.1021/acsnano.4c10964ACS Nano XXXX, XXX, XXX−XXXCCPhysics. Section 10: M.C. acknowledges the financial supportsfrom the Nano & Material Technology program (RS-2023-00282896) and Mid-Career Research program (RS-2023-00279529) through the NRF funded by the MSIT of theKorean government. W.J. acknowledges the NRF SejongScience fellowship (NRF-2022R1C1C2007317) funded by theMSIT of the Korean government, and the NRF Basic ScienceResearch program (NRF-2018R1A6A1A03026005) funded bythe MOE of the Korean government. Section 12: E.L.acknowledges the SBS Foundation fellowship, the PresidentialScience fellowship funded by the MSIT of the Koreangovernment, and the NRF M.S. fellowship (RS-2024-00464712) funded by the MOE of the Korean government.Section 13: H.K. acknowledges the NRF Ph.D. fellowship (RS-2024-00407755) funded by the MOE of the Koreangovernment. Y.P. acknowledges the Presidential Sciencefellowships (RS-2024-00460406) funded by the MSIT of theKorean government. Section 15: This work at the University ofCentral Florida was supported by NSF grant no.ECCS#1920840. Section 17: N.L. acknowledges supportfrom the Max Planck Society (Max Planck Fellow). Section18: This research was supported by Nano·Material TechnologyDevelopment Program through the NRF funded by Ministry ofScience and ICT (RS-2024-00450828) and the Bio & MedicalTechnology Development Program of the National ResearchFoundation (NRF) funded by the Korean government(MSIT) (RS-2024-00440577). Section 18: This research wassupported by the NRF grant, funded by Korean governmentMSIT (NRF-2021R1A2C3010083) and the Bio & MedicalTechnology Development Program of the NRF funded by theKorean government MSIT (RS-2024-00440577). Section 19:This work was supported by the Office of Naval Research(ONR N00014-21-1-2289). S.-M.P. gratefully acknowledgesupport from the Ryan Fellowship and the InternationalInstitute for Nanotechnology at Northwestern University.Section 20: This research was supported by the Nano &Material Technology Development Program through theNational Research Foundation of Korea (NRF) funded byMinistry of Science and ICT (RS-2024-00409405). Section 21:The authors gratefully acknowledge funding from the frame-work of international cooperation program managed by theNational Research Foundation of Korea (NRF-2023K2A9A2A22091303). Section 23: This work wassupported by the National Research Foundation of Korea(NRF) grant funded by the Korea government (MSIT) (RS-2025-00556856). Section 27: The authors acknowledgesupport by GRK 2767 - Projektnummer 451785257 (DFG,German Research Foundation). C.R. acknowledges receipt of aLiebig fellowship (Fonds der Chemischen Industrie). TheVolkswagen Foundation financially supported this projectthrough a Freigeist Fellowship to T.K. Section 28: C.A.M. andK.A. acknowledge support from the Air Force Office ofScientific Research under award number FA9550-22-1-0300.Z.L. acknowledges the support from the International Institutefor Nanotechnology (IIN) at Northwestern University for theRichard P. Van Duyne Postdoctoral Fellowship. Section 29:N.J. acknowledges the Hyundai Motor Chung Mong-Koofellowship. Section 32: The authors acknowledge financialsupport from the Australian Research Council (CE200100010,FT220100053) and the Office of Naval Research Global(N62909-22-1-2028). Conclusion: J.K. acknowledges the AsanFoundation Biomedical Science fellowship, and the Presiden-tial Science fellowship funded by the MSIT of the Koreangovernment. We acknowledge Doohyuk Han for reviewing andproviding comments on the summarized table., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Advancement in indoor energy harvesting through flexible perovskite photovoltaics for self- powered IoT applications

  • Qamar, Muhammad Zain
  • Khalid, Zubair
  • Shahid, Raghisa
  • Tsoi, Wing Chung
  • Mishra, Yogendra Kumar
  • Kyaw, Aung Ko Ko
  • Saeed, Muhammad Ahsan
Perovskite photovoltaics (PPVs), renowned for their high efficiency in dim indoor illumination conditions, cost-effective manufacturing processes, and compatibility with flexible substrates, emerge as a superior choice over traditional photovoltaics (PVs) for Internet of Things (IoT) applications, contributing to the advancement of eco-friendly energy initiatives. While flexible PPVs (f-PPVs) boast significant advantages over traditional PV technologies; there's a notable scarcity of reports focusing on their performance in indoor settings. The timely review underscores recent advancements in f-PPVs, aiming for their seamless integration into IoTs. It extensively explores crucial metrics in dim indoor lighting conditions, centering on indoor light source types, optimum functionality with perovskite passivation, and the optimization of bandgap and an ideality factor to achieve improved performance in indoor f-PPVs. Furthermore, it examines the strategies for improving the efficiency and stability of f-PPVs, with a pivot focus on selecting suitable flexible substrates and fabrication techniques conducive to mass-scale production. Besides, the significance of promoting eco-friendly IoT devices is emphasized by eliminating toxic materials and solvents from the device fabrication process. Finally, the review tackles pressing challenges and offers guidelines for the development of efficient and stable f-PPVs, aiming to facilitate their commercialization within the IoT ecosystem., This research is supported by the National Natural Science Foundation of China (Grant No. 62150610496) and the Shenzhen Science, Technology and Innovation Commission (JCYJ20220530113014033). WCT acknowledged Engineering and Physics Science Research Council (EPSRC) Application Targeted And Integrated Photovoltaics (ATIP) (EP/T028513/1) Grant., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Supercapacitors: An Emerging Energy Storage System

  • Iqbal, Muhammad Faisal
  • Nasir, Farooq
  • Shabbir, Fiza
  • Babar, Zaheer Ud Din
  • Saleem, Muhammad Farooq
  • Ullah, Kaleem
  • Sun, Nana
  • Ali, Faizan
Electrochemical capacitors are known for their fast charging and superior energy storage capabilities and have emerged as a key energy storage solution for efficient and sustainable power management. This article comprehensively explores the fundamental principles, architectural advancements, and material innovations underpinning supercapacitor technology. It covers the evolution of supercapacitor performance, the comparison of pseudocapacitors, double-layer capacitors, electrolytes, and the integration of innovative nanostructured materials, such as carbon nanotubes, transition metal oxides, MXene, and graphene, and it investigates the hybrid systems that bridge the gap between capacitors and batteries. The article also discusses the future perspectives of supercapacitor technology. By examining emerging trends and recent research, this review provides a comprehensive overview of electrochemical capacitors as an emerging energy storage system., Financial support from the Spanish Ministry of Science and Innovation (FJC2020-043023-I) is acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

BORA overexpression promotes epithelial-mesenchymal transition and metastasis in ovarian cancer: Unveiling a novel therapeutic target for advanced disease

  • Barber, Marta
  • Boloix, Ariadna
  • Parrilla, Alfonso
  • Köber, Mariana
  • Avilés Domínguez, Laia
  • Ventosa, Nora
  • Ramírez Morales, Lidia del Carmen
  • Pérez Benavente, Asunción
  • Gil Moreno, Antonio
  • Colàs, Eva
  • Morote, Juan
  • Segura, Miguel F.
  • Méndez, Olga
  • Santamaria, Anna
This work was supported in part by grants from Instituto de Salud Carlos III (PI15/00238) to Anna Santamaria. This work was funded by the Instituto de Salud Carlos III through the projects (PI23/01144), (ICI21000/76), (FORT23/00034) (Co-funded by the European Regional Development Fund/European Social Fund; “A way to make Europe”/“Investing in your future”) to Miguel F. Segura. Marta Barber was supported by predoctoral fellowship from AGAUR (2020 FI_B 00058). This work was funded by Ministerio de Ciencia e Innovación (#PID2022-137332OB-I00) and ajuts d'Indústria del Coneixement (2021 PROD 00059) to Nora Ventosa., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

WorMe: A user-oriented software for Caenorhabditis elegans length determination

  • Llobet Lladó, Josep
  • Garriga Alonso, Núria
  • Muñoz Juan, Amanda
  • Laromaine, Anna
Version v2.18.1, Caenorhabditis elegans is a widely used animal model for biomedical research. The length of the nematode is a quantifiable parameter commonly used to assess its development and evaluate its health. Although most measurements are performed manually, software that automates this process exists. However, most available tools are designed for stereomicroscope images, and none work reliably for optical microscopy images. Here, we present WorMe, a user-friendly software that measures C. elegans length in optical microscopy images. The program is versatile in handling various image types, and can analyse multiple images collectively. Furthermore, the user can accept or discard the detected objects, separate joined worms, correct erroneous measurements, and manually add new worms. Then, the length results are presented in a spreadsheet file, with each measurement linked to its image. Graphic data can also be exported., The work has been supported partially with RTI2018-096273-B100, PID2021-122645OB-100 funded by MCIN/AEI//10.13039/501100011033/FEDER “Una manera de hacer Europa”; the “Severo Ochoa” Programme for Centres of Excellence, in R&D CEX2019-000917-S (FUNFUTURE), CEX2023-001263-S (MATRANS42), and European Union’s Horizon Europe research and innovation program under grant agreement No 101057527 (NextGEM). JLL acknowledges ayudas JAE ICU, Consejo Superior de Investigaciones Científicas (CSIC), JAEICU-21-ICMAB01 (2021) in the framework of the Master of Bioinformatics and Biostatistics (UOC, 2021), NGA acknowledges ayudas JAEIntro, Consejo Superior de Investigaciones Científicas (CSIC), JAEINT-24-01745, (2024), AMJ acknowledges the Ph.D. scholarship (FPU18/05190)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

CuO Nanoparticles: Tuning Properties for Energy and Optoelectronic Applications

  • Akhtar, Naveed
  • Malik, Saima
  • Muhammad, Fida
  • Ullah, Zakir
This study examines the impact of synthesis parameters on the structural, optical, and catalytic properties of CuO nanoparticles,aiming to enhance their performance for applications in energy conversion, catalysis, and optoelectronics. CuO nanoparticles weresynthesized through various chemical routes, and their properties were characterized using x-ray diffraction (XRD), scanningelectron microscopy (SEM), and UV–Vis spectroscopy. The findings show that synthesis conditions, including temperature,precursor concentration, and reaction time, significantly influence crystallite size, morphology, bandgap energy, and catalyticactivity. Higher synthesis temperatures and longer reaction times led to improved crystallinity and reduced particle size, which inturn lowered the bandgap energy and enhanced the optical properties. Optical characterization revealed that the bandgap could befine-tuned by adjusting synthesis parameters, making the nanoparticles suitable for specific optoelectronic applications. Catalyticperformance tests demonstrated that the CuO nanoparticles exhibited excellent activity in degrading organic pollutants, with theirperformance strongly dependent on synthesis conditions. This research highlights the potential of CuO nanoparticles as versatilematerials, with customizable properties for use in advanced technologies. By controlling synthesis parameters, the study provides apathway for the targeted design of CuO nanoparticles, contributing to the development of efficient and sustainable nanomaterialsfor future technological applications., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

On the use of bioprecursors for sustainable silicon-based anodes for Li-ion batteries

  • Blanco, M. Valeria
  • Palacín, M. Rosa
The growing demand for sustainable and high performance Li-ion batteries has driven research into new bioprecursors for battery components. Among potential candidates for next-generation negative electrodes, silicon stands out due to its high theoretical capacity compared to conventional graphite. However, the challenges associated with silicon, including volume expansion and sustainability concerns, have limited its widespread adoption. In this context, bioprecursors have garnered significant attention as a green and renewable alternative for producing high performance silicon-based anodes. This perspective article explores the potential of bio-based precursors, specifically rice husks, diatom frustules, and other biomass-derived materials, for the development of sustainable silicon anodes for Li-ion batteries. While biowaste-derived silicon materials—such as rice husks—have been widely explored, this work contrasts them with the emerging potential of harnessing the morphological plasticity of diatom microalgae as a novel route to design biosilicas with tunable nanostructures, providing a controlled and sustainable pathway for high-performance Si-based anodes. We discuss the chemical processes, environmental benefits, and future directions for enhancing the performance of Si-based electrodes derived from these natural materials., Authors thank Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S) and funding through grant RYC2023-045836-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Nanoparticles in photothermal therapy-based medical and theranostic applications: an extensive review

  • Koç, Mümin Mehmet
  • Paksu, Ufuk
  • Kurnaz Yetim, Nurdan
  • Coşkun, Burhan
  • Hasanoğlu Özkan, Elvan
  • Erkovan, Mustafa
Nanoparticles are often referred to as miracle materials with extensive applications in various fields, especially in biomedicine, and in cancer treatment. Regarding vast applications of nanoparticles in biomedicine, photothermal therapy (PTT) also attracts the attention of researchers in various fields, since PTT is noninvasive and can provide localized therapy. We provide an extensive review that explores the use of various nanoparticles, including carbon-based, metallic, semiconductor, and composite nanostructures, in PTT and theranostic applications. The work also illustrates the mechanisms underlying the photothermal conversion process in nanomaterials, which were discussed in detail. Moreover, the review demonstrates recent advancements in photothermal nanoparticles such as surface modifications, PEGylation, polydopamine coating, composite nanoparticle formations, core@shell formations, and biomolecule functionalization. Such advancements and modifications enhance their drug delivery behaviors, tumor-targeting efficiency, biocompatibility, and multimodal characteristics. Furthermore, such modifications lead to combined imaging and therapeutic functionalities, which were often referred to as theranostics where magnetic resonance imaging (MRI), X-ray computed tomography (CT) and photoacoustic imaging (PAI) enables precise monitoring and treatment of tumors simultaneously. The review gives an insight into the potential of photothermal nanoparticles and enables researchers to truly discover the potential of the photothermal nanoparticles for future research directions where photothermal nanoparticles can find practical applications in nanomedicine and cancer therapy., Open access funding provided by the Scientific and Technological Research Council of Türkiye (TÜBİTAK). Kırklareli Üniversitesi, KLUBAP 273, Mumin Mehmet Koc., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Advances in Conductive Nanomaterials for Cardiac Arrhythmia and Future Directions in Bioevaluation Strategies

  • Srinivasan, Sumithra Y.
  • Laromaine, Anna
Cardiac arrhythmia (CA), characterized by irregular heart rhythms, affects nearly 90% of individuals with cardiovascular diseases. Commonly triggered by myocardial infarction (MI) or ion channel dysfunctions, CA is traditionally treated using pacemakers, cardioversion, ablation, and anti-arrhythmic drugs. Recently, emerging strategies like cardiac patches and injectable formulations with conductive nanomaterials (CNMs) have shown promise in restoring cardiac rhythm post-MI. This review explores CNMs-such as gold nanoparticles, carbon nanotubes, and conjugated polymers-that mimic the electrical and mechanical properties of native cardiac tissue. While in vitro studies show encouraging results, translating CNMs to clinical settings faces challenges. Few studies have assessed their safety and efficacy in rodent models, and none in larger animals. This gap stems from the complexity and ethical hurdles of large animal research. To address this, the review advocates using small animal models like zebrafish, Drosophila melanogaster, and Caenorhabditis elegans. These models offer insights into pharmacokinetics, pharmacodynamics, genetic effects, and cardiac parameters such as ejection fraction and cardiac output-data often unattainable in vitro. Such platforms can better evaluate CNMs' safety and efficacy than 2D/3D cultures, accelerating progress toward clinical application., This work was supported by the Spanish Ministry of Science and Innovation (MICINN) through the National Research Agency (AEI) and European Regional Development Funds (ERDF/FEDER), project BIOSOFT-REGE ref PID2021-122645OB-I00, BACTIVE ref PID2024-1576370B-I00, BIOCCHIP ref PDC2023-145826-I00, the Program/Generalitat de Catalunya (2021SGR00446 project), the Severo Ochoa Program of the Spanish Ministry of Science and Innovation (MICINN_Grant CEX2018−000,789-S, CEX2023-001263-S), and the projects FIP-BEAT, and the PDC2022-133755-I00/AEI/10.13039/501100011033 European Union NextGeneration EU/PRTR. This research was also supported by the European Union's Horizon 2020 research and innovation program H2020-MSCA-COFUND-2016 (DOC-FAM, Grant Agreement No. 754397), European Union’s Horizon Europe research and innovation program under grant agreement No 101057527 (NextGEM). Authors participate in the Spanish National Research Council (CSIC) interdisciplinary platform for sustainable plastics toward a circular economy (SusPlast), and in CSIC-Conexion Nanomedicina del CSIC, EPNOE network, and Red Nanocare 2.0, Grant RED2022-134560-T funded by MCIN/AEI/10.13039/501100011033. The authors acknowledge the use of Biorender.com., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

A Comprehensive Review on Filled Carbon Nanotubes: Synthesis, Properties and Applications

  • Sandoval, Stefania
  • Gonçalves, Gil
  • Pérez Barrio, Jorge
  • Kharlamova, Marianna V.
  • Tobias, Gerard
Carbon nanotubes (CNTs) have emerged as one of the most exciting families of carbon nanomaterials. Their hollow tubular architecture, with a nanometric inner cavity, not only defines their distinct physical and chemical behavior but also enables the encapsulation of a wide range of materials, including inorganic and organic compounds. This encapsulation capability allows CNTs to function as nanocontainers, protective hosts, and confined reaction vessels, leading to novel hybrid materials with tailored optical, electronic, catalytic, and mechanical properties. In this review, we provide a comprehensive overview of the methodologies employed for filling CNTs, including in situ and ex situ approaches. We critically examined the diverse range of materials encapsulated within CNTs, highlighting how confinement at the nanoscale influences their chemical reactivity, phase stability, and emergent quantum phenomena. Special attention is given to the wide range of applications of filled CNTs in addressing societal challenges. These include biomedicine, catalysis, energy storage, gas separation, filtration membranes, sensing technologies, and nanoelectronics. Beyond revisiting the current state-of-the-art, this review offers a critical discussion of future directions and challenges in this field., We acknowledge financial support by MCIN/AEI/10.13039/501100011033 (Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación) through grants PID2020-113805GB-I00 and PID2023-146263NB-I00, and Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S). G.T.-R. acknowledges funding by ERC Consolidator Grant NEST (725743). S.S. acknowledges funding from the postdoctoral fellowship programme Beatriu de Pinós, funded by the Secretary of Universities and Research (Government of Catalonia) and Horizon 2020 programme of research and innovation of the European Union under the Marie Sklodowska-Curie grant agreement no. 801370. We also acknowledge support from Generalitat de Catalunya (grant 2021SGR00439). G.G. gratefully acknowledges funding by the projects CarboNCT 2022.03596.PTDC (https://doi.org/10.54499/2022.03596.PTDC), UIDB/00481/2020, and UIDP/00481/2020 - Fundação para a Ciência e a Tecnologia (FCT)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Metal and Covalent Organic Frameworks Meet OB-GYN: Advancing Applications in Women's Health and Pregnancy Care

  • Shi, Yue
  • Zeng, Muling
  • Casals, Eudald
  • Casals, Gregori
  • Liu, Ning
Metal–organic frameworks (MOFs) and Covalent–organic frameworks (COFs) are promising materials for biomedical applications due to their high surface area, tunable porosity, and functional versatility. Functionalized or nanoparticle-containing MOFs and COFs have been largely explored in preclinical studies for drug delivery, photodynamic and photothermal therapies, and ROS generation targeting cancer cells, among others. Additionally, they have shown potential as carriers of imaging agents for precise biomarker identification and tumor detection. However, the application of nanomaterials in medicine, including MOFs and COFs, still does not meet the expectations set more than two decades ago. This is particularly important in the maternal-fetal field, where substantial maternal health risks during pregnancy and childbirth affect many women. Only recently a range of preliminary studies exist, as these risks have traditionally been viewed as inherent to pregnancy, leaving significant gaps in innovative solutions for women's health that nanomaterials have the potential to bridge. This review addresses this critical need, offering a summary of current research in obstetrics and gynecology and maternal-fetal applications of MOFs and COFs, identifying gaps, and aiming to guide future research to expand nanomedicine's impact in these areas., This work was supported by grants from the Instituto de Salud Carlos III (PI24/00688 and BA22/00017 to G.C.), co-financed by FEDER, European Union, “A way of making Europe.”, With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Perspectives in power applications of low and mainly high temperature superconductors: energy, transport and industry

  • García-Tabarés, L.
  • Toral, Fernando
  • Munilla, J.
  • González, L.
  • Puig Molina, Teresa
  • Obradors, Xavier
Recent advances in superconducting materials are giving renewed impetus to different power applications, some of which already existed based on previous superconductors with more modest properties while some others have been the symbiosis of new requirements in science and technology and better properties of the new superconductors. This paper constitutes a review of classical and new superconducting materials for power applications (the technological superconductors as they are frequently called) in terms of their structure and their engineering properties (electrical, mechanical and thermal) but also in terms of their manufacturability and scalability for possible scenarios where massive quantities may be required. The second and longer part of the paper is a state of the art of power applications of superconductivity related to energy (generation, transport and transmission), transport (airborne, waterborne and terrestrial) and industrial processes. Practically, all these applications are based on superconducting magnets, which are addressed in the article, including new technologies regarding their design, fabrication and operation. Particularly, these magnets can be the coils of superconducting electrical machines, also described in the paper, where different applications are presented following a scheme of problems to be solved versus the solution provided by superconductivity, including benefits regarding sustainability improvement associated with their better efficiency and power consumption reduction., ICMAB authors acknowledge the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for SUPERENERTECH (PID2021-127297OB-C21), SUPERPOWER (TED2021-130004B-100), HTS-JOINTS (PDC2022-133208-I00) and FUNFUTURE “Severo Ochoa” Program for Centers of Excellence in R&D (CEX2019-000917-S), EU-COST SUPERQUMAP (CA-21144) and Hi-Scale (CA-19108), the Catalan Government for 2021 SGR 0040 and MATRANS42 (CEX2023-001263-S). CIEMAT authors acknowledge the Spanish Ministry of Science and Innovation for funding MagNext project under 2020 R&D Program, reference PID2020-120582GB-I00, and the PRISMAC program in collaboration with the Spanish Center for Technological and Industrial Development (CDTI) and CERN under contracts KE-3797 and KE-3920. CIEMAT also acknowledges the European Commission for funding the MARES Project (Proposal number 101172746 from the Call HORIZON-CL5-2024-D3-01) and the POSEIDON Project ( Proposal number 101096457 from the call HORIZON-CL5-2022-D5-01)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S). With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

A Comprehensive Review of Clinical Studies on Bacterial Cellulose: From the Earliest Uses to Contemporary Innovations

  • Meslier, Thomas
  • D'Antin, Justin Christopher
  • Julio, Gemma
  • Roig Serra, Anna
Bacterial cellulose (BC), a biopolymer produced by Gram-negative bacteria such as those from the Komagataeibacter genus, has emerged as a promising material in biomedical applications due to its exceptional purity, biocompatibility, mechanical strength, versatility in sterilization, biodegradability, and sustainable production. This comprehensive review traces the evolution of BC-based medical products from their initial development in the 1980s to present-day innovations, highlighting the progression of clinical evidence supporting their use. Early clinical studies primarily focused on BC as a temporary skin substitute for burns and ulcers. Over time, the scope of BC applications expanded to include dural defect repair, tympanic membrane reconstruction, and fetal surgery for spina bifida. The quality of clinical evidence has improved, with recent years seeing an increase in randomized controlled trials and larger patient cohorts. Several BC-based products are already commercially available, supported by regulatory approvals and a growing body of clinical data. This review seeks to serve as a valuable resource by providing an exhaustive recapitulation of published clinical studies on BC-based medical devices encompassing 3,857 subjects and offering insights into their efficacy, safety, and regulatory considerations. The review outlines future research directions to validate BC's potential across a wide range of in vivo biomedical applications., The authors want to acknowledge the Generalitat de Catalunya (grants 2021SGR00446, 2019LLAV00046, 2021PRO00204, and 2023INNOV00044). The projects PID2021-122645OBI00 and the “Severo Ochoa” Program for the Center of Excellence in R&D (CEX2023001263-S), funded by MCIN/AEI/10.13039/501100011033 by “ERDF A way of making Europe”., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Future Circular Collider Feasibility Study Report: Volume 3 Civil Engineering, Implementation and Sustainability

  • Benedikt, M.
  • Zimmermann, F.
  • Auchmann, B.
  • Bartmann, W.
  • Burnet, J. P.
  • Carli, C.
  • Chancé, A.
  • Craievich, P.
  • Giovannozzi, M.
  • Grojean, C.
  • Gutleber, J.
  • Hanke, K.
  • Henriques, A.
  • Janot, P.
  • Lourenço, C.
  • Mangano, M.
  • Otto, T.
  • Poole, J.
  • Rajagopalan, S.
  • Raubenheimer, T.
  • Todesco, E.
  • Ulrici, L.
  • Watson, T.
  • Wilkinson, G.
  • Abada, A.
  • Abbrescia, M.
  • Abdolmaleki, H.
  • Abidi, S. H.
  • Abramov, A.
  • Adam, C.
  • Ady, M.
  • Adz̆ić, P. R.
  • Agapov, I.
  • Aguglia, D.
  • Ahmed, I.
  • Aiba, M.
  • Aielli, G.
  • Akan, T.
  • Akchurin, N.
  • Akturk, D.
  • Al-Thakeel, M.
  • Alberghi, G. L.
  • Alcaraz Maestre, J.
  • Aleksa, M.
  • Aleksan, R.
  • Alharthi, F.
  • Alimena, J.
  • Alimenti, A.
  • Alioli, S.
  • Alix, L.
  • Allanach, B. C.
  • Allwicher, L.
  • Altintas, A. A.
  • Altınlı, M.
  • Alviggi, M.
  • Ambrosio, G.
  • Amhis, Y.
  • Amiri, A.
  • Ammirabile, G.
  • Andeen, T.
  • André, K. D.J.
  • Andrea, J.
  • Andreazza, A.
  • Andreini, M.
  • Andriollo, T.
  • Corbí, Angel L.
  • Angelucci, M.
  • Antusch, S.
  • Anwar, M. N.
  • Apolinário, L.
  • Apollinari, G.
  • Appleby, R. B.
  • Apresyan, A.
  • Apyan, Aram
  • Apyan, Armen
  • Arbey, A.
  • Argiento, B.
  • Ari, V.
  • Arias, S.
  • Arias Alonso, B.
  • Arnaez, O.
  • Arnaldi, R.
  • Arneodo, F.
  • Arnold, H.
  • Arrutia Sota, P.
  • Ascioti, M. E.
  • Assamagan, K. A.
  • Aydın, G.
  • Azizi, K.
  • Azzi, P.
  • Bacchetta, N.
  • Bacci, A.
  • Bai, B.
  • Bai, Y.
  • Balconi, L.
  • Baldinelli, G.
  • Balhan, B.
  • Ball, A. H.
  • Ballarino, A.
Volume 3 of the FCC Feasibility Report presents studies related to civil engineering, the development of a project implementation scenario, and environmental and sustainability aspects. The report details the iterative improvements made to the civil engineering concepts since 2018, taking into account subsurface conditions, accelerator and experiment requirements, and territorial considerations. It outlines a technically feasible and economically viable civil engineering configuration that serves as the baseline for detailed subsurface investigations, construction design, cost estimation, and project implementation planning. Additionally, the report highlights ongoing subsurface investigations in key areas to support the development of an improved 3D subsurface model of the region. The report describes the development of the project scenario based on the ‘avoid-reduce-compensate’ iterative optimisation approach. The reference scenario balances optimal physics performance with territorial compatibility, implementation risks, and costs. Environmental field investigations covering almost 600 hectares of terrain—including numerous urban, economic, social, and technical aspects—confirmed the project’s technical feasibility and contributed to the preparation of essential input documents for the formal project authorisation phase. The summary also highlights the initiation of public dialogue as part of the authorisation process. The results of a comprehensive socio-economic impact assessment, which included significant environmental effects, are presented. Even under the most conservative and stringent conditions, a positive benefit-cost ratio for the FCC-ee is obtained. Finally, the report provides a summary of the studies conducted to document the current state of the environment., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Highlight selection of radiochemistry and radiopharmacy developments by editorial board

  • Toyohara, Jun
  • Elsinga, Philipp H.
  • Todde, Sergio
  • Li, Xiang Guo
  • Aime, Silvio
  • Szymanski, Wictor C.
  • van der Meulen, Nick
  • Cleeren, Frederik
  • Schirrmacher, Ralf
  • Yang, Hua
  • Savio, Eduardo
  • Bentaleb, Naoual
  • Zubillaga, Marcela
  • Chaple Gore, Ivis F.
  • Bourgeois, Mickaël
  • Mukherjee, Archana
  • Pellico, Juan
  • Kopka, Klaus
Background: The Editorial Board of EJNMMI Radiopharmacy and Chemistry releases a biannual highlight commentary to update the readership on trends in the field of radiopharmaceutical development and application of radiopharmaceuticals. Main Body: This selection of highlights provides commentary on 18 different topics selected by each co-authoring Editorial Board member addressing a variety of aspects ranging from novel radiochemistry to first-in-human application of novel radiopharmaceuticals. Conclusion: Trends in radiochemistry and radiopharmacy are highlighted. Hot topics cover the entire scope of EJNMMI Radiopharmacy and Chemistry, demonstrating the progress in the research field in many aspects., Open Access funding enabled and organized by Projekt DEAL., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Review and Perspectives on the Sustainability of Organic Aerogels

  • García González, Carlos A.
  • Blanco Vales, María
  • Barros, Joana
  • Boccia, Antonella Caterina
  • Budtova, Tatiana
  • Durães, Luisa
  • Erkey, Can
  • Gallo, Marta
  • Herman, Petra
  • Kalmár, József
  • Iglesias Mejuto, Ana
  • Malfait, Wim J.
  • Zhao, Shanyu
  • Manzocco, Lara
  • Plazzotta, Stella
  • Milovanovic, Stoja
  • Neagu, Monica
  • Nita, Loredana E.
  • Paraskevopoulou, Patrina
  • Roig Serra, Anna
  • Simón Vázquez, Rosana
  • Smirnova, Irina
  • Tomović, Željko
  • López- glesias, Clara
Aerogels are exceptionally lightweight materials characterized by their high open porosity and remarkable specific surface area, currently used across a wide array of industrial sectors from construction to energy storage and have great potential for expanding their applicability and unlocking new market opportunities. Driven by global economic growth and an intensifying environmental crisis, there is a growing demand for engineering innovations that prioritize sustainability. Aerogels are well-positioned to support these sustainability efforts. Their unique properties make them ideal for energy-saving solutions, environmental remediation, and more efficient use of resources. As the demand for eco-conscious technologies rises, aerogels are poised to contribute significantly to the development of greener, more efficient products and processes across multiple industries. The sustainability of aerogel technology is crucial for the mid-to-long-term future, yet its current status has been scarcely reviewed in the literature. This Perspective explores and critically reviews significant advances on organic and hybrid aerogels in the current socioeconomic scenario, with selected case studies endorsing their contribution to the UN Sustainable Development Goals. It also identifies research gaps while proposing innovative strategies to enhance the sustainability of aerogel production through the application of circular economy principles. Key strategies discussed involve the fabrication of aerogels using eco-friendly sources, such as biopolymers derived from biorefinery processes or from waste materials. Additionally, this Perspective examines the development of methods for the reuse, recycling, and end-of-life management of aerogels, along with the implementation of more efficient processing routes. Ultimately, this work highlights the need for comprehensive assessments of aerogel sustainability through life cycle assessment (LCA) and evaluations of safety and toxicity. By addressing these critical aspects, the potential of aerogels to contribute to a more sustainable future appears highly favorable from both commercial and research perspectives, paving the way for a circular aerogel economy and providing a lasting impact to the society in which we live., This publication is based upon work from COST Innovators’ Grant “Technical, commercial and societal innovations on aerogels towards circular economy” (ECO-AERoGELS, IG18125) supported by COST (European Cooperation in Science and Technology) and funded by the European Commission. This work was funded by MICIU/AEI/10.13039/501100011033 [grant PID2023-151340OB-I00], Xunta de Galicia [ED431C2022/2023], and ERDF/EU. C.L.-I. acknowledges Xunta de Galicia for a postdoctoral fellowship [ED481B-2021-008]. Authors thank Chang-lin Wang, Yi-Ru Chen, and Christos Pantazidis for their assistance during the preparation of the manuscript., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

The need to implement FAIR principles in biomolecular simulations

  • Amaro, Rommie E.
  • Åqvist, Johan
  • Bahar, Ivet
  • Battistini, Federica
  • Bellaiche, Adam
  • Beltran, Daniel
  • Biggin, Philip C.
  • Bonomi, Massimiliano
  • Bowman, Gregory R.
  • Bryce, Richard A.
  • Bussi, Giovanni
  • Carloni, Paolo
  • Case, David A.
  • Cavalli, Andrea
  • Chang, Chia En A.
  • Cheatham, Thomas E.
  • Cheung, Margaret S.
  • Chipot, Christophe
  • Chong, Lillian T.
  • Choudhary, Preeti
  • Cisneros, G. Andres
  • Clementi, Cecilia
  • Collepardo-Guevara, Rosana
  • Coveney, Peter
  • Covino, Roberto
  • Crawford, T. Daniel
  • Dal Peraro, Matteo
  • de Groot, Bert L.
  • Delemotte, Lucie
  • De Vivo, Marco
  • Essex, Jonathan W.
  • Fraternali, Franca
  • Gao, Jiali
  • Gelpí, Josep Ll
  • Gervasio, Francesco L.
  • González-Nilo, Fernando D.
  • Grubmüller, Helmut
  • Guenza, Marina G.
  • Guzman, Horacio V.
  • Harris, Sarah
  • Head-Gordon, Teresa
  • Hernandez, Rigoberto
  • Hospital, Adam
  • Huang, Niu
  • Huang, Xuhui
  • Hummer, Gerhard
  • Iglesias-Fernández, Javier
  • Jensen, Jan H.
  • Jha, Shantenu
  • Jiao, Wanting
  • Jorgensen, William L.
  • Kamerlin, Shina C.L.
  • Khalid, Syma
  • Laughton, Charles
  • Levitt, Michael
  • Limongelli, Vittorio
  • Lindahl, Erik
  • Lindorff-Larsen, Kresten
  • Loverde, Sharon
  • Lundborg, Magnus
  • Luo, Yun L.
  • Luque, F. Javier
  • Lynch, Charlotte I.
  • MacKerell, Alexander D.
  • Magistrato, Alessandra
  • Marrink, Siewert J.
  • Martin, Hugh
  • McCammon, J. Andrew
  • Merz, Kenneth
  • Moliner, Vicent
  • Mulholland, Adrian J.
  • Murad, Sohail
  • Naganathan, Athi N.
  • Nangia, Shikha
  • Noe, Frank
  • Noy, Agnes
  • Oláh, Julianna
  • O’Mara, Megan L.
  • Ondrechen, Mary Jo
  • Onuchic, Jose N.
  • Onufriev, Alexey
  • Osuna, Sílvia
  • Palermo, Giulia
  • Panchenko, Anna R.
  • Pantano, Sergio
  • Parish, Carol
  • Parrinello, Michele
  • Molina-Pérez, Alberto
  • Perez-Acle, Tomas
  • Perilla, Juan R.
  • Pettitt, B. Montgomery
  • Pietropaolo, Adriana
  • Piquemal, Jean Philip
  • Poma, Adolfo B.
  • Praprotnik, Matej
  • Ramos, Maria J.
  • Ren, Pengyu
  • Reuter, Nathalie
  • Roitberg, Adrian
  • Rosta, Edina
In the Big Data era, a change of paradigm in the use of molecular dynamics is required. Trajectories should be stored under FAIR (findable, accessible, interoperable and reusable) requirements to favor its reuse by the community under an open science paradigm., The authors thank the whole MD community for useful inputs and discussions. The MDDB project is supported by European Union’s Horizon Europe programme under grant agreement 101094651 awarded to M.O., E.L., S.V., J.L.G., J.I., A.C. and P.C.B., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Carbonyl-based organic electrode materials spanning from nonaqueous rechargeable lithium to calcium batteries

  • Zhao, Kun
  • Wang, Xingxing
  • Feng, Wenfang
  • Ponrouch, Alexandre
  • Poizot, Philippe
  • Armand, Michel
  • Zhou, Zhibin
  • Zhang, Heng
Electrochemical energy storage systems, particularly rechargeable batteries, show great potential in efficiently implementing intermittent renewable energies into a current energy network. In light of the superior natural abundant element and moderate specific energy, rechargeable calcium batteries (RCBs) have attracted wide attention, as complementary technology to the prevailing rechargeable lithium batteries (RLBs). However, calcium chemistry differs drastically from the existing lithium chemistry (e.g., electrochemical kinetics and potential), calling for ingenious design of key battery materials (e.g., electrodes and electrolytes). Carbonyl-based organic electroactive materials (OEMs) exhibit fast electrochemical kinetics, high reversible capacity and excellent capacity retention, being promising for constructing high-performance rechargeable batteries. In this work, the carbonyl-based compounds in either discrete or polymeric/immobilized forms, being utilized as OEMs for calcium and lithium-based rechargeable batteries, are scrutinized, with due consideration given to similarities and distinctions between two battery systems. Concentrating on carbonyl-based OEMs, significant impacts from electrode-electrolyte interphases/interfaces and electrolyte components are presented. Furthermore, the existing challenges and opportunities for improving the electrochemical performances of carbonyl-based materials in RCBs are provided. This work may serve as a spur for the practical deployment of sustainable and high-energy rechargeable batteries., This work is financially supported by the National Natural Science Foundation of China (no. 22279037 and 52203223) and the Fundamental Research Funds for Central Universities, HUST (2020kfyXJJS095)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

MXenes in Next-Generation Light-Emitting Diodes: Innovations, Challenges, and Future Prospects

  • Ali, Awais
  • Saeed, Muhammad Ahsan
  • Ahmad, Waqas
  • Seo, Hanseok
  • Park, Junhyeok
  • Oh, Seongkeun
  • Choi, Hyung Jin
  • Sultan, Muhammad Junaid
  • Mujahid, Rana
  • Oh, Soong Ju
Two-dimensional transition metal carbides and nitrides (MXenes) have rapidly emerged as high-performance materials for next-generation light-emitting diodes (LEDs), offering a unique combination of metallic conductivity, tunable work function, optical transparency, and mechanical robustness. Their incorporation into organic, quantum-dot, and perovskite LEDs has led to significant improvements in charge injection, carrier balance, operating voltage, stability, and device flexibility parameters directly linked to energy-efficient light generation. Despite these advances, the field lacks a comprehensive review that connects MXene chemistry with device-level energy performance. Here, we critically examine the roles of MXenes as transparent electrodes, interfacial modifiers, charge-transport enhancers, and emissive materials in state-of-the-art LED architectures. We highlight structure-property relationships, surface-termination effects, and interface-engineering strategies that govern charge dynamics and energy utilization. By consolidating recent breakthroughs while identifying key challenges in synthesis, defect control, and scalability, this review provides a timely roadmap for leveraging MXenes to enable low-power, stable, flexible, and intelligent solid-state lighting and display technologies., This work was supported by the National Research Foundation of Korea (NRF) grants funded by the Korea government (MSIT) (RS-2024-00411892, RS-2025-02222208, and RS-2026-25468502)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Electrocatalytic upcycling of PET-derived products: Catalyst design, C1 - C2 products, and coupled electrochemical reactions

  • Qamar, Muhammad Zain
  • Ali, Awais
  • Saeed, Muhammad Ahsan
  • Heijden, Maxime van der
The accumulation of plastic waste represents both a global environmental crisis and a largely untapped source of carbon feedstocks. Electrocatalytic upcycling of polyethylene terephthalate (PET) has emerged as a promising energy-efficient strategy to convert plastic-derived ethylene glycol into value-added C<inf>1</inf>-C<inf>2</inf> chemicals, including glycolic acid and formic acid, under mild operating conditions. This review summarizes recent advances in electrocatalyst design for PET upcycling, including defect-engineered, single-atom catalyst, and heterostructured interfaces, with a focus on how catalyst structure regulates interfacial charge transfer, oxidation pathways, and product selectivity. Beyond catalyst development, we highlight integrated electrocatalytic platforms that couple PET-derived anodic oxidation with value-added cathodic CO<inf>2</inf> or nitrate reduction, thereby lowering cell voltage and enabling co-production of value-added chemicals (e.g., ammonia, cyclohexanone oxime). Insights from in situ spectroscopy and computational modeling elucidate critical structure-function relationships, while process-level analyses underscore scalability and energy efficiency. Finally, key challenges and future opportunities related to reactor design, energy efficiency, and scalability are outlined, positioning electrocatalytic plastic-to-chemicals refineries as a viable pathway toward circular carbon utilization and sustainable energy systems., M.Z.Q. and M.v.d.H. acknowledge the support of the Natural Sciences and Engineering Research Council of Canada (NSERC) through the Discovery grant program (RGPIN-2025–04132). M.A.S. acknowledges funding by the European Commission through the Marie Skłodowska-Curie project HOPES (101104491)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Neat ionic liquids and deep eutectic solvents in photonics: status quo and future directions

  • Miroshnichenko, Mila
  • Bharmoria, Pankaj
In the past decades, ionic liquids (ILs) and deep eutectic solvents (DESs) have gained recognition as green solvents, mainly because of their low vapor pressure, potential for recycling, and customized synthesis. The customization leverages task specificity for a particular application. While the photoactive ILs and DESs have been used as adjuvants in aqueous or organic solution for a variety of applications, this perspective article discusses the relatively underexplored applications of neat ILs or DESs in the field of photonics. Specifically, customization of their chemical structure is discussed to facilitate a particular linear and non-linear optical response, serving as a solvent-free photonic component, including future directions., P. B. acknowledges the Ramón y Cajal grant from the Spanish State Investigation Agency (grant no. J03416) and La-Caixa junior research leadership-post doctoral project PHOLCEB (ID: 100010434, fellowship code: LCF/BQ/P122/11910023) for financial support. M. M. and P. B. acknowledge the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S) and project PID2021-123873NB-I00 for financial support., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Superconducting high-power cables and lines—development status and technology roadmap

  • Noe, Mathias
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Laan, D C. van der
  • Dönges, S.A.
  • Weiss. Jeremy
  • Radcliff, Kyle
  • Cheetham, Peter
  • Pamidi, S.
  • Nguyen, Doan
  • Nguyen, L.N .
  • Bach, R.
  • Mansheim, P.
  • Prinz, R.
  • Willen, Dag
  • Alekseev, Alexander
  • McCullough, K.
  • Hodge, E.
  • Ishmael, Sasha
  • Luke, M.
  • Nilsson, E.
  • Rivenc, J.
  • Rouquette, J.F .
  • Ybanez, Ludovic
  • Tassisto, M.
  • Berg, F.
  • Boukayoua, S.
  • Delarche, A.
  • Dunoyer, F.
  • Chaper, C.
  • Kharche, Swapnil
  • Baroille, J.M .
  • Räch, Carsten
  • Reiser, W.
  • Huwer, Stefan
  • Hanebeck, C.
  • Abrell, P.
  • Chikumoto, N.
  • Saugrain, J.M.
  • Allais, Arnaud
  • Ryu, C.H .
  • Lee, J.Y .
  • Cho, J.W.
  • Zong, X.
  • Wang, B.
  • Allweins, K.
  • Herzog, Friedhelm
  • Dioguardi, F.
  • Xiao, L.
  • Qiu, Q.
  • Arndt, T.
  • Palacios, Sebastian
  • Wehr, Mira
  • Wolf, M.J .
  • Bruzek, Christian Eric
  • Marian, Adela
The energy transition requires a tremendous investment in electric grids, mainly due to electrification of heat and mobility sectors and due to the huge expansion of renewable energy. Superconductors offer an extremely high current density while having no resistance. In the past years, the cost-performance of high-temperature superconducting tapes decreased constantly, and the manufacturing capacity was expanded considerably.In parallel, many AC and DC superconducting cables for various applications from low-voltage up to high-voltage levels have been developed, successfully tested and operated in field tests. The availability of the high-temperature superconducting tapes and the increasing need for network expansion result in an increased interest on the development of superconducting cables.In this paper, the most important and most recent R&D activities on superconducting cables are summarized. The paper is structured in four main parts. Firstly, an introduction is given not only on the history of R&D but also on the high-temperature superconducting materials and conductors. The main part shows some selected R&D projects in more detail, while in the third part common issues relevant to all cables like cooling are discussed. The paper ends with contributions to hybrid superconducting cables, where electricity transport is combined with chemical energy carriers like liquid hydrogen.It can be summarized that several projects demonstrated, that superconducting cables can fulfil all technical requirements for a long-term field operation and first permanent installations are realized. Attractive applications for superconducting cables include electric grids, high-current industry bus bars, data centers and aviation., We acknowledge the European Research Council for the ULTRASUPERTAPE Project (ERC-2014-ADG-669504), IMPACT Project (ERC-2019-PoC-8749) and SMS-INKS (ERC-2022-PoC-101081998), and EU COST actions OPERA (CA20116) and SUPERQUMAP (CA-21144). We also acknowledge the financial support from the Spanish Ministry of Science and Innovation and the European Regional Development Fund, MCIU/AEI/FEDER for SUPERENERTECH (PID2021–127297OB-C21), SUPERPOWER (TED2021-130004B-I00), ‘Severo Ochoa’ Program for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S and Matrans42 CEX2023-001263-SCEX), HTS-JOINTS (PDC2022–133208-I00) and PTI + TransEner CSIC programme for Spanish NGEU. The authors also thank the Catalan Government for 2021 SGR 00440., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S). With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Topological Materials and Related Applications

  • Grazianetti, Carlo
  • Mantovan, Roberto
  • Longo, Emanuele
  • Zandvliet, Harold J.W.
  • Bampoulis, Pantelis
  • Pan, Yu
  • Li, Fan
  • Wang, Xia
  • Downey, Payton
  • Molle, Alessandro
The topological properties of matter have reached nowadays a broad interest in the scientific and technological communities, mostly because those properties, initially exotic and hard to follow, have now demonstrated exploitability in everyday-life applications. In this light, beyond expanding our knowledge in the condensed matter physics field as well as revisiting some definitions of solid-state physics, the topological properties of materials might provide substantial benefits for challenges involving human society and environment. Here, we review the topological materials like topological insulators, quantum valley Hall and quantum spin Hall insulators, and topological Weyl and Dirac semimetals aiming at spotlighting the most recent advancements in fields like spintronics, electronics, photonics, thermoelectrics, and catalysis. Finally, we provide with an outlook on the recent class of topological materials like kagome, Lieb and moiré heterostructures which are expected to further expand the wealth of applications based on topological properties of matter., C.G. and A.M. acknowledge the Italian program for Research Projects of outstanding National Interest (PRIN) and Next Generation EU EMPEROR (grant number 20225L4EBJ, CUP B53D23008560006) and ITER (grant number 2022XMYF5E, CUP B53D23008950006), respectively. R.M. acknowledges financial support from the PNRR MUR project PE0000023-NQSTI and the SPIGA project funded by the European Union – NextGenerationEU—PNRR—M4C2, Investment Line 1.1 – PRIN 2022 – ID P2022LXNYN. E.L. acknowledges funding provided by the Spanish Ministry of Science and Innovation through Projects PID2023-152225NB-I00 and Severo Ochoa MATRANS42 (CEX2023-001263-S). H.J.W.Z acknowledges funding from the Dutch Research Council (NWO, grant number OCENW.M20.232) and the research program “Materials for the Quantum Age” (QuMat) for financial support (registration number 024.005.006). P.B. acknowledges funding from the European Union and the Dutch Research Council (NWO, grant numbers: OCENW.M22.123 and NWO Vidi VI.Vidi.233.019). Funded by the European Union (ERC, Q-EDGE, 101162852). Views and opinions expressed are, however, those of the author(s) only and do not necessarily reflect those of the European Union or the European Research Council. Neither the European Union nor the granting authority can be held responsible for them. X.W. acknowledges funding by the European Union through EXQIRAL (No. 101131579), and the Würzburg-Dresden Cluster of Excellence on Complexity and Topology in Quantum Matter – ct.qmat (EXC 2147, project ID 390858490). Open access publishing facilitated by Consiglio Nazionale delle Ricerche, as part of the Wiley - CRUI-CARE agreement., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Dynamical response of noncollinear spin systems at constrained magnetic moments

  • Royo, Miquel
  • Stengel, Massimiliano
Noncollinear magnets are notoriously difficult to describe within first-principles approaches based on density-functional theory (DFT) because of the presence of low-lying spin excitations. At the level of ground-state calculations, several methods exist to constrain the magnetic moments to a predetermined configuration, and thereby accelerate convergence towards self-consistency. Their use in a perturbative context, however, remains very limited. Here we present a general methodological framework to achieve parametric control over the local spin moments at the linear-response level. Our strategy builds on the concept of Legendre transform to switch between various flavors of magnetic functionals, and to relate their second derivatives via simple linear-algebra operations. Thereby, we can address an arbitrary response function at the time-dependent DFT level of theory with optimal accuracy and minimal computational effort. In the low frequency limit, we identify the leading correction to the existing adiabatic formulation of the problem [S. Ren \emph{et al.}, Phys. Rev. X {\bf 14}, 011041 (2024)], consisting in a renormalization of the phonon and magnon masses due to electron inertia. As a demonstration, we apply our methodology to the THz optical response of bulk CrI$_3$ and Cr$_2$O$_3$, where we identify contributions from hybrid (electro)magnons with mixed spin-lattice character., We thank Shang Ren and David Vanderbilt for many illuminating discussions and for carefully testing our code. M. R. thanks the Center for Materials Theory at Rutgers University for its kind hospitality and stimulating research environment. This work was supported by MCIU/AEI/10.13039/501100011033 (Grants No. PID2023-152710NB-I00, No. PRX22/00390 and Severo Ochoa Center of Excellence Grant No. CEX2023-001263-S) and Generalitat de Catalunya (Grant No. 2021 SGR 01519)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Emergence, Challenges, and Opportunities for Chiral Nanocellulose Assemblies in Tissue Engineering and Wound Healing

  • Nabavinia, Mahboubeh
  • Khanjanzadeh, Hossein
  • Rodriguez Muguruza, Asier
  • Roig Serra, Anna
  • Lizundia, Erlantz
  • Zoppe, Justin O.
Biomaterials play a vital role in tissue engineering and regenerative medicine. Chiral materials have emerged as promising platforms in biomedicine due to their ability to mimic the hierarchical organization of the native extracellular matrix and to modulate cellular and microbial behavior through chirality-dependent biological interactions. This review highlights the potential of chiral nanocellulose assemblies and their applications in tissue engineering and wound healing. We first introduce chirality, together with the structural and functional properties of nanocellulose. We then discuss the interactions between chiral materials and mammalian as well as bacterial cells, emphasizing how chirality may influence cellular adhesion, proliferation, differentiation, and antimicrobial responses. We then summarize recent advances in the application of chiral biobased materials for tissue regeneration and wound repair, with a particular focus on nanocellulose-based systems. The self-assembly of cellulose nanocrystals into chiral nematic phases, in particular, allows the fabrication of effective biomimetic materials for wound healing and controlling cell adhesion. By controlling factors like ionic strength, pH, external fields, and additives, the chiral nematic pitch and resulting properties of cellulose nanocrystal assemblies can be finely tuned. Finally, we outline advantages and obstacles in the application of chiral nanocellulose for specific biomedical applications. Overall, chiral nanocellulose-derived materials represent a potentially sustainable and versatile platform with significant prospects to enable next-generation therapeutic strategies in tissue engineering and wound healing., J.O.Z. is funded by the European Union (ERC, CELICOIDS, 101087368). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or the European Research Council Executive Agency. Neither the European Union nor the granting authority can be held responsible for them. J.O.Z. and E.L. acknowledge the financial support of the Spanish Ministry of Science and Innovation for the project BIOCHOLESTEROID (PID2024-156017NB-I00). J.O.Z. wishes to also acknowledge the financial support of the Spanish Ministry of Science and Innovation for the project HAMMER (PID2021-125595NB-I00) and the Serra Húnter Fellowship from the Generalitat de Catalunya. E.L. thanks the financial support from the University of the Basque Country (Convocatoria de ayudas a grupos de investigación GIU21/010). A.R. wishes to acknowledge funding from the Spanish Ministry of Science and Innovation (CEX2023001263-S & PID2024-157637OB-I00, funded by MICIU/AEI/10.13039/501100011033 and co-funded by the European Union with the FSE+)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Roadmap on freestanding oxide membranes (FOMs)

  • Pryds, Nini
  • Gunkel, Felix
  • Trier, Felix
  • Jovanović, Zoran
  • Kornblum, Lior
  • García Hernández, Mar
  • Brandbyge, Mads
  • Bøggild, Peter
  • Harbola, Varun
  • Wu, Yu Jung
  • Mannhart, Jochen
  • Santamaria, Jacobo
  • Eom, Chang Beom
  • Varshney, Shivasheesh
  • Choo, Sooho
  • Lee, Dong Kyu
  • Aetukuri, Naga Phani B.
  • Jalan, Bharat
  • Pesquera, David
  • Santiso, José
  • Schwarzkopf, Jutta
  • Martin, Jens
  • Sallés, Pol
  • Coll, Mariona
  • Koster, Gertjan
  • Spreitzer, Matjaz
  • Zhang, Xinyuan
  • Kim, Jeehwan
  • Radovic, Milan
  • Petrovic, Jelena
  • Song, Jeongkeun
  • Lee, Ho Nyung
  • Nord, Magnus
  • Roh, Chang Jae
  • Segantini, Greta
  • Caviglia, Andrea D.
  • Jani, Hariom
  • Xu, Ruijuan
  • Hong, Seung Sae
  • Martin, Lane W.
  • Bosch, Iris C.G.van den
  • Baeumer, Christoph
  • Alff, Lambert
  • Preu, Sascha
  • Knabe, Judith
  • Dittmann, Regina
The ability to rationally design materials with specific properties is a major motivator in materials science and condensed matter physics. Driven by this motivation and by the potential to open new technological avenues, researchers are continually pushing the boundaries of established materials while pioneering new ones. This push has led to newly developed techniques for fabricating, handling, and transferring freestanding oxide membranes (FOMs), providing a new avenue to overcome traditional oxide epitaxial growth limitations, which relies on specific substrates and synthesis conditions. These advances enable the design and creation of novel materials with previously inaccessible interface symmetries, stacking configurations, and atomic reconstructions, opening exciting possibilities for exploring new physics and developing innovative device architectures using atomically engineered complex oxides. At the same time, these advancements present new challenges in the synthesis, membrane transfer, characterization, and final functionalization of FOMs. The field is still in its early stages and necessitates further scientific and technological progress. This roadmap offers an overview of the current state of the field and perspectives on its future, highlighting opportunities, challenges, and guiding principles for the research community., We acknowledge support from the EU COST Action OPERA—EurOPean NEtwork foR Innovative and Advanced Epitaxy (CA20116), supported by COST (European Cooperation in Science and Technology). N. P. acknowledges funding from the ERC Advanced (NEXUS, Grant No. 101054572), from Villum Fonden research Grant (VIL73726), and from Novo Nordisk Foundation Challenge Programme 2021: Smart nanomaterials for applications in life-science, BIOMAG Grant NNF21OC0066526. F G acknowledges funding by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation), Project Nos. 522417350 and 493705276 and DAAD PPP Project No. 57703261. F T acknowledges support by research Grant No. 37338 (SANSIT) from Villum Fonden and Grant No. https://doi.org/10.46540/4254-00012B (PESTO) from Independent Research Fund Denmark. Z J acknowledges the Science Fund of the Republic of Serbia, grant No. 6706, ‘Low-dimensional nanomaterials for energy storage and sensing applications: Innovation through synergy of action’- ASPIRE and bilateral projects Serbia–Slovenia and Serbia–Germany (Grant Nos. 337-00- 110/2023-05/28 and 337-00-253/2023-05/7, respectively). L K acknowledges support from the Israeli Science Foundation (ISF Grant No. 1397/24)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed