Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 49
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Unveiling molecular changes in water by small luminescent nanoparticles

  • Labrador Páez, Lucía
  • Jovanović, Dragana J.
  • Marqués, Manuel I.
  • Smits, Krisjanis
  • Dolić, Slobodan D.
  • Jaque, Francisco
  • Stanley, Harry Eugene
  • Dramićanin, Miroslav D.
  • García‐Solé, José
  • Haro‐González, Patricia
  • Jaque, Daniel
Nowadays a large variety of applications are based on solid nanoparticles dispersed in liquids—so called nanofluids. The interaction between the fluid and the nanoparticles plays a decisive role in the physical properties of the nanofluid. A novel approach based on the nonradiative energy transfer between two small luminescent nanocrystals (GdVO4:Nd3+ and GdVO4:Yb3+) dispersed in water is used in this work to investigate how temperature affects both the processes of interaction between nanoparticles and the effect of the fluid on the nanoparticles. From a systematic analysis of the effect of temperature on the GdVO4:Nd3+ → GdVO4:Yb3+ interparticle energy transfer, it can be concluded that a dramatic increase in the energy transfer efficiency occurs for temperatures above 45 °C. This change is properly explained by taking into account a crossover existing in diverse water properties that occurs at about this temperature. The obtained results allow elucidation on the molecular arrangement of water molecules below and above this crossover temperature. In addition, it is observed that an energy transfer process is produced as a result of interparticle collisions that induce irreversible ion exchange between the interacting nanoparticles.
Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

Surface-based and mass spectrometric approaches to deciphering sugar-protein interactions in a galactose-specific agglutinin

  • Jiménez-Castells, Carmen
  • Defaus, Sira
  • Moise, Adrian
  • Przbylski, Michael
  • Andreu Martínez, David
  • Gutiérrez Gallego, Ricardo, 1968-
Over the last decades, sugar-protein interactions have been acknowledged as key players in numerous biological recognition processes, such as those occurring during pathogen-host adhesion or fertilization. Consequently, interest in finding powerful and nanosized tools to study glycan-protein interactions in detail has increased significantly in recent years. Here, two complementary approaches are applied to characterize glycan-protein interactions with high sensitivity, low sample consumption, and without the need for sample labelling: surface plasmon resonance (SPR) and an approach that combines limited proteolysis and mass spectrometry. Combination of these two approaches to investigate glycan-protein interactions allows (1) to characterize interactions through kinetic and thermodynamic parameters, (2) to capture efficiently the carbohydrate-binding protein, and (3) to identify the interacted protein and its carbohydrate binding site by mass spectrometry. As a proof of principle, the interaction of the galactosespecific legume lectin Erythrina cristagalli agglutinin with several sugars has been characterized indepth by means of these two approaches., This work was supported by the Spanish Ministry of Science and Innovation (projects BIO2008-04487-CO3-02 and HA2007-0021 to D.A. and BIO2009-08983 to R.G.G., and predoctoral fellowship BES-2006-12879 to C.J.C.), by the Spanish Ministry of Economy and Competitiveness (project SAF2011-24899 to D.A.), and by the Deutsche Forschungsgemeinschaft (PR-175/14-1) and the EU (MSLife).
Repositorio Digital de la UPF
Publicación Artículo científico (JournalArticle)

Recent progress in the field of neoglycoconjugate chemistry

  • Jiménez-Castells, Carmen
  • Defaus, Sira
  • Andreu Martínez, David
  • Gutiérrez Gallego, Ricardo, 1968-
Glycosylation is probably the most complex secondary gene event that affects the vast majority of proteins in nature resulting in the occurrence of a heterogeneous mixture of glycoforms for a single protein. Many functions are exerted by single monosaccharides, well-defined oligosaccharides, or larger glycans present in these glycoproteins. To unravel these functions it is of the utmost importance to prepare well-defined single glycans conjugated to the underlying aglycon. In this review, the most recent developments are described to address the preparation of carbohydrate-amino acid (glyco-conjugates). Naturally occurring N- and O-linked glycosylation are described and the preparation of non-natural sugar-amino acid linkages are also included., The authors would like to acknowledge the financial support received from the European Union (HEALTH-F3-2008-223414), Ministerio de Ciencia e Innovación (BIO2008-04487-CO3-02 and BIO2009-08983) and Generalitat de Catalunya (2009 SGR 492)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Probabilistic analysis of a cantilever beam with load modelled via Brownian motion

  • Cortés, J.-C.|||0000-0002-6528-2155
  • López-Navarro, Elena|||0000-0003-0164-9007
  • Real Herráiz, Julia Irene
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
This work has been supported by the grant PID2020-115270GB-I00 funded by MCIN/AEI/10.13039/501100011033 and the grant AICO/2021/302 (Generalitat Valenciana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Probabilistic analysis of a class of impulsive linear random differential equations forced by stochastic processes admitting Karhunen-Loève expansions

  • Cortés, J.-C.|||0000-0002-6528-2155
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
  • Delgadillo-Alemán, Sandra E.
  • Ku-Carrillo, Roberto A.
[EN] We study a full randomization of the complete linear differential equation subject to an infinite train of Dirac's delta functions applied at different time instants. The initial condition and coefficients of the differential equation are assumed to be absolutely continuous random variables, while the external or forcing term is a stochastic process. We first approximate the forcing term using the Karhunen-Loeve expansion, and then we take advantage of the Random Variable Transformation method to construct a formal approximation of the first probability density function (1-p.d.f.) of the solution. By imposing mild conditions on the model parameters, we prove the convergence of the aforementioned approximation to the exact 1-p.d.f. of the solution. All the theoretical findings are illustrated by means of two examples, where different types of probability distributions are assumed to model parameters., This work has been supported by the Spanish grants PID2020-115270GB-I00 funded by MCIN/AEI/10.13039/501100011033 and AICO/2021/302 (Generalitat Valenciana) , and also by the Mexican Council of Science and Technology (CONACYT) program "Apoyos complementarios para estancias sabaticas vinculadas a la consolidacion de grupo de investigacion" and the Universidad Autonoma de Aguascalientes, PIM21-5, PIM21-7.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

The random variable transformation method to solve some randomized first-order linear control difference equations

  • Navarro-Quiles, A.
  • Real Herráiz, Julia Irene
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
This work has been partially supported by the Spanish grant PID2020-115270GB-I00 funded by MCIN/AEI/10.13039/501100011033 and the grant AICO/2021/302 (Generalitat Valenciana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solving discrete first-order matrix linear control problems with general parametric uncertainties: A probability-density-based approach

  • Cortés, J.-C.|||0000-0002-6528-2155
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
  • Navarro-Quiles, A.
[EN] This paper deals with the probabilistic analysis of discrete first-order linear control models with uncertainties. For the sake of generality in our stochastic analysis, we assume that all model parameters (the initial and final states, the matrix containing the free dynamics part, and the control's coefficient) are random variables with an arbitrary joint probability density function. We then combine some results from classical Control Theory with Probability Theory to obtain, under very general hypotheses, the first probability density function of the control and the solution, which are parametric stochastic processes. To illustrate our theoretical findings, we also show two numerical examples and a classical discrete macroeconomic model whose parameters are treated as random variables.& COPY; 2023 The Author(s). Published by Elsevier Inc. on behalf of The Franklin Institute., This work has been supported by the grant PID2020-115270GB-I00 funded by the institution MCIN/AEI/10.13039/501100011033 and the grant AICO/2021/302 (Generalitat Valenciana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Probabilistic analysis of scalar random differential equations with state-dependent impulsive terms via probability density functions

  • Bevia-Escrig, Vicente-José
  • Jornet, M.
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
This work has been partially supported by the Spanish Ministerio de Economia, Industria y Competitividad (MINECO), the Agencia Estatal de Investigacion (AEI) and Fondo Europeo de Desarrollo Regional (FEDER UE) grant PID2020-115270GB-I00, the Generalitat Valenciana (grant AICO/2021/302) and by el Fondo Social Europeo y la Iniciativa de Empleo Juvenil EDGJID/2021/185. Vicente Bevia acknowledges the doctorate scholarship granted by Programa de Ayudas de Investigacion y Desarrollo (PAID), Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Areas of endemism as a conservation criterion for Iberian gypsophilous flora: a multi-scale test using the NDM/VNDM program

  • Martínez-Hernández, Fabián
  • Mendoza-Fernández, Antonio J.
  • Pérez-García, Francisco J.
  • Garrido-Becerra, Juan A.
  • Salmerón-Sánchez, Esteban
  • Merlo, M. Encarna
  • Gil, Carlos
  • Mota, Juan F.
  • Martínez-Nieto, M. Isabel|||0000-0002-8342-8920
[EN] The identification of areas of endemism is a crucial tool for both the interpretation of the spatial component of biological evolution and the plotting of priority areas as far as biodiversity conservation is concerned. Geographical isolation, aridity and special substrates are among the factors which can help to explain the restricted areas of the taxa. All these factors concur in the origin of the Iberian gypsophilous flora, rich in endemic and threatened species. Gypsum is a particularly demanding rock for plants, and gypsum outcrops are usually fragmented in space, in territories with arid conditions. Information on the presence of 71 gypsophytes was collected in 10 £ 10 km Universal Transverse Mercator (UTM). The distribution of these plants was used to plot the main areas of endemism for the vascular flora on Iberian gypsum outcrops. This was carried out using the eNDeMism/Visor of eNDeMism (NDM/VNDM) program and several grid cell sizes. A total of 51 areas of endemicity were identified and represented on a map according to their program selection frequency. The South East (SE) of the Iberian Peninsula was the only area selected in all the tests. The results were also compared with other factors of interest for the conservation of gypsophilous flora like genetic diversity of four gypsophytes., This research project was supported by ADIF and the University of Almerı¿a [via the reference contract no. 3.0/5500.0203/0-00000 AV 018/10]. The project has also received money from FEDER funds. F. Martı¿nez-Herna¿ndez is sponsored by the Contrato Puente del Plan Propio de Investigacio¿n 2014 , financed by Programa Operativo FEDER Andalucı¿a 2007 2013 .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Beyond nest size: the clinicopathological spectrum of large nested melanocytic tumours and the value of comparative genomic hybridisation and messenger RNA expression analysis

  • Mosquera-Zamudio, Andrés
  • Pérez-Debén, Silvia
  • Porcar-Saura, Saray
  • Casabó-Vallés, German
  • Martínez-Rodríguez, Miguel
  • Garzón, María José
  • García-López, Eva
  • Monteagudo, Carlos
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
[EN] Large nested melanomas (LNMs) are a rare subtype of naevoid melanoma consisting of large junctional melanocytic nests that are more common in older individuals and/or associated with sun damage. However, the presence of large melanocytic nests alone does not lead to a diagnosis of malignancy, as they can also be found in melanocytic naevi. LNMs are challenging because they lack most classic histological features of malignancy and require thorough clinicopathological evaluation. This ambiguity calls for a critical reassessment of the current diagnostic criteria for the subclassification of benign or malignant within the spectrum of large nested melanocytic tumours (LNMTs). Eighteen LNMTs and six special-site melanocytic naevi (SSMNs) were studied using different approaches: clinical features, dermoscopy, histopathology, immunohistochemistry, array comparative genomic hybridisation (aCGH) and messenger RNA (mRNA) sequencing analysis, with the aim of identifying novel and reproducible criteria for the recognition of LNMs.Careful clinicopathological evaluation of the 18 LNMTs led to the diagnosis of seven LNMs and 11 large nested melanocytic naevi (LNMNs). Lentiginous spread and nest bridging were significantly associated with LNMs after Holm-Bonferroni correction. Asymmetry, largest nest size, poor lateral demarcation, the number of colours and dermoscopic structures, and preferentially expressed antigen in melanoma (PRAME) immunostaining were more common in LNMs but did not reach statistical significance. Four of seven LNMs and nine of 11 LNMNs lacked the BRAF V600E mutation. Regarding aCGH, no LNMN or SSMN cases had >= 3 copy number variations (CNVs), in contrast to 50% of LNM cases. Importantly, LNM and LNMN could be distinguished by differential mRNA expression of nine genes. Our study demonstrates that there is a spectrum of LNMTs and that the clinicopathological diagnosis of LNM, for which we support the term 'late-onset nested naevoid melanomas', can be significantly strengthened by the presence of lentiginous pattern, nest bridging, gene CNV and differential mRNA expression., CM, VN and AM-Z are supported by Horizon 2020 Marie Sklodowska Curie Action 860627 CLARIFY grant from the European Commission; CM, VN, EG-L and SP-D are supported by INNEST/2021/302/58 grant from Agencia Valenciana de la Innovacion-AVI Generalitat Valenciana. CM is also supported by PI20/00094 grant from Instituto de Salud Carlos III, Spain; and FEDER European funds. The authors state that there are no conflicts of interest to disclose.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Constructing reliable approximations of the fractional Hermite equation: solution, moments and density

  • Burgos-Simon, Clara|||0000-0001-6385-4263
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
  • Caraballo, Tomás
  • Villafuerte, Laura
[EN] We extend the study of the random Hermite second-order ordinary differential equation to the fractional setting. We first construct a random generalized power series that solves the equation in the mean square sense under mild hypotheses on the random inputs (coefficients and initial conditions). From this representation of the solution, which is a parametric stochastic process, reliable approximations of the mean and the variance are explicitly given. Then, we take advantage of the random variable transformation technique to go further and construct convergent approximations of the first probability density function of the solution. Finally, several numerically simulations are carried out to illustrate the broad applicability of our theoretical findings., This work has been supported by the grant PID2020-115270GB-I00 funded by MCIN/AEI/10.13039/501100011033 (Spanish "Agencia Estatal de Investigacion"), the grant AICO/2021/302 (Generalitat Valenciana) and the posdoctoral grant from Universitat Politecnica de Valencia Margarita Salas funded by the Spanish Ministry of Universities and Next-Generation, EU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Probabilistic analysis of a general class of nonlinear random differential equations with state-dependent impulsive terms via probability density functions

  • Bevia, Vicente J.
  • Jornet-Sanz, Marc
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
[EN] In this contribution, we rigorously construct a pathwise solution to a general scalar random differential equation with state-dependent Dirac-delta impulse terms at a finite number of time instants. Furthermore, we obtain the first probability density function of the solution by combining two main results, firstly, the Liouville-Gibbs equation between the impulse instants, and secondly, the Random Variable Transformation technique at the impulse times. Finally, all theoretical findings are illustrated on two stochastic models, widely used in mathematical modeling, carrying on computational simulations.(c) 2023 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)., This work has been partially supported by the Spanish Ministerio de Economia, Industria y Competitividad (MINECO), the Agencia Estatal de Investigacion (AEI), Spain, and Fondo Europeo de Desarrollo Regional (FEDER UE) grant PID2020-115270GB-I00, the Generalitat Valenciana, Spain (grant AICO/2021/302) and by el Fondo Social Europeo y la Iniciativa de Empleo Juvenil EDGJID/2021/185. Vicente Bevia acknowledges the doctorate scholarship granted by Programa de Ayudas de Investigacion y Desarrollo (PAID), Universitat Politecnica de Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Extending the analysis of the Euler-Bernoulli model for a stochastic static cantilever beam: Theory and simulations

  • Cortés, J.-C.|||0000-0002-6528-2155
  • López-Navarro, Elena|||0000-0003-0164-9007
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
  • Martínez-Rodríguez, Pablo
[EN] In this paper, we present a comprehensive probabilistic analysis of the deflection of a static cantilever beam based on Euler-Bernoulli's theory. For the sake of generality in our stochastic study, we assume that all model parameters (Young's modulus and the beam moment of inertia) are random variables with arbitrary probability densities, while the loads applied on the beam are described via a delta-correlated process. The probabilistic study is based on the calculation of the first probability density function of the solution and the probability density of other key quantities of interest, such as the shear force, and the bending moment, which are treated as random variables too. To conduct our study, we will first calculate the first moments of the solution, which is a stochastic process, and we then will take advantage of the Principle of Maximum Entropy. Furthermore, we will present an algorithm, based on Monte Carlo simulations, that allows us to simulate our analytical development computationally. The theoretical findings will be illustrated with numerical examples where different realistic probability distributions are assumed for each model random parameter., This work has been supported by the grant PID2020-115270GB-I00 funded by MCIN/AEI/10.13039/501100011033 and the grant AICO/2021/302 (Generalitat Valenciana). We give our deepest thanks & nbsp;to the two anonymous reviewers for their useful comments and suggestions that have improved the final version of the paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Al2O3-3YTZP-Graphene multilayers produced by tape casting and spark plasma sintering

  • Rincón, Acacio
  • Moreno, Rodrigo
  • Chinelatto, Adriana S. A.
  • Gutierrez-Gonzalez, Carlos F.
  • E. Rayón|||0000-0002-0653-2046
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
This work aims to establish a colloidal route to obtain laminates of alumina zirconia combining layers with and without graphene. Green tapes of alumina, alumina with 5 vol.% of 3Y-TZP and alumina with 5 vol.% of 3Y-TZP and graphene-oxide (2 vol.%) were obtained by aqueous tape casting. It is possible to design materials for different structural applications with a controlled microstructure with a high number of different layers. The tapes were punched into 20-mm discs, joined to form laminates alternating up to 18-layers, and sintered in one-step by spark plasma sintering (SPS) at 1400 degrees C. It has demonstrated that there is a significant graphite diffusion provoked by the required graphite holders into the SPS-furnace. Dense laminates with layer thicknesses similar to 100 mu m and good cohesion between layers were obtained. Nanoindentation results showed that hardness and elastic modulus values were higher than 27 GPa and 300 GPa, respectively, and similar for all layers. Crown Copyright (C) 2014 Published by Elsevier Ltd. All rights reserved., This work has been supported by Spanish Ministry of Economy and Competitiviness (MAT2012-31090). A. S. A. Chinelatto thanks to CAPES - Programa Ciencias sem Fronteiras (Brazil) for the concession of a fellowship for post-doctoral sabbatical grant in ICV-CSIC, Spain. A. Borrell, acknowledges the Spanish Ministry of Science and Innovation for her Juan de la Cierva contract (JCI-2011-10498) and the Generalitat Valenciana by the financial support for the BEST/2012/302 grant. Authors thank to Nanoinnova Technologies (Spain) for supplying the graphene oxide and helpful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Human Mobility Prediction with Region-based Flows and Water Consumption

  • Terroso-Sáenz, Fernando
  • Muñoz, Andrés
  • Fernández-Pedauyé, Julio José
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] We are witnessing an increasing need to accurately measure people's mobility as it has become an instrumental factor for the development of innovative services in multiple domains. In this context, several ICT solutions have relied on location-based technologies such as GPS, WiFi or Bluetooth to track individual's movements. However, these technologies are limited by the privacy restrictions of data providers. In this paper we propose a methodology to robustly predict citizens' mobility patterns based on heterogeneous data from different sources. Particularly, our methodology focuses on a human mobility predictor based on a low-resolution mobility dataset and the use of water consumption data as a facilitator of this prediction task. As a result, this work explores whether the water consumption within a geographical region can reveal human activity patterns relevant from the point of view of the mobility mining discipline. This approach has been tested in a residential area near Madrid (Spain) obtaining quite promising results., This work was supported in part by the Spanish Ministry of Science and Innovation, through the Ramon y Cajal Program under Grant RYC2018-025580-I, Grant RTI2018-096384-B-I00, and Grant RTC-2017-6389-5; in part by the Fundacion Seneca del Centro de Coordinacion de la Investigacion de la Region de Murcia under Project 20813/PI/18, and in part by the "Conselleria de Educacion, Investigacion, Cultura y Deporte, Direccio General de Ciencia i Investigacio, Proyectos AICO/2020," Spain, under Grant AICO/2020/302.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Solving random fractional second order linear equations via the mean square Laplace transform

  • Burgos-Simon, Clara|||0000-0001-6385-4263
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
  • Villafuerte, L.
This work has been supported by the grant PID2020-115270GB¿I00 funded by MCIN/AEI/ 10.13039/501100011033 and the grant AICO/2021/302 (Generalitat Valenciana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

ZrTiO4 materials obtained by Spark Plasma Reaction Sintering

  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • García-Rocha, Victoria
  • Fernández, Adolfo
  • Gómez, Andrés
  • López-López, Emilio
  • Moreno, Rodrigo
Zirconium titanate (ZrTiO4), have many attractive properties such as high resistivity, high dielectric constant, high permittivity at microwave frequencies and excellent temperature stability for microwave properties. Zirconium titanate dense materials are proposed for many structural applications, but fully reacted and completely dense pieces are difficult to obtain by conventional routes. In this work, fully dense zirconium titanate materials ( 98%) were obtained at lower temperatures (1300 1400 C) and short processing time by non-conventional technique; spark plasma-reaction sintering (SPRS). Homogeneous and stable starting powders mixture with the adequate composition was prepared from the raw materials: m-ZrO2 ( 0.3 lm) and anatase-TiO2 ( 40 nm). Dense materials were mechanically and microstructural characterised. The fracture strength was measured by biaxial testing, giving values of about 200 MPa., This study has been supported by the Spanish Ministry of Science and Innovation MAT2009-14144-C03-02, MAT2012-38364-C03-02 and MAT2012-31090. A. Borrell, acknowledges the Spanish Ministry of Science and Innovation for her Juan de la Cierva contract (JCI-2011-10498) and the Generalitat Valenciana for the BEST/2012/302 grant and the financial support for ACOMP/2012/166.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A LoRa-based protocol for connecting IoT edge computing nodes to provide small-data-based services

  • Nakamura, Kiyoshy
  • Redondi, Alessandro
  • Longo, Edoardo
  • Zennaro, Marco
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
[EN] Data is becoming increasingly personal. Individuals regularly interact with a variety of structured data, ranging from SQLite databases on the phone to personal sensors and open government data. The ¿digital traces left by individuals through these interactions¿ are sometimes referred to as ¿small data¿. Examples of ¿small data¿ include driving records, biometric measurements, search histories, weather forecasts and usage alerts. In this paper, we present a flexible protocol called LoRaCTP, which is based on LoRa technology that allows data ¿chunks¿ to be transferred over large distances with very low energy expenditure. LoRaCTP provides all the mechanisms necessary to make LoRa transfer reliable by introducing a lightweight connection setup and allowing the ideal sending of an as-long-as necessary data message. We designed this protocol as communication support for small-data edge-based IoT solutions, given its stability, low power usage, and the possibility to cover long distances. We evaluated our protocol using various data content sizes and communication distances to demonstrate its performance and reliability., This work was partially supported by the "Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital", Proyectos AICO/2020, Spain, under Grant AICO/2020/302 and "Ministerio de Ciencia, Innovacion y Universidades, Programa Estatal de Investigacion, Desarrollo e Innovacion Orientada a los Retos de la Sociedad, Proyectos IDI 2018", Spain, under Grant RTI2018-096384-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving UAV Mission Quality and Safety through Topographic Awareness

  • Wubben, Jamie
  • Morales, Christian
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] The field of Unmanned Aerial Vehicles (UAVs) has progressed greatly in the last years. UAVs are now used for many applications and are often flown automatically. One commonly implemented feature in an automatic flight is that of following a mission at a stable altitude. However, this altitude is almost always referenced from the take-off location and does not take terrain profile levels into account. This is a critical and dangerous issue because if the terrain level changes abruptly (e.g., mountain regions or buildings in a city), this can lead to crashes or an unintended (illegal) high altitude. Our aim for this work is to provide a solution such that a constant altitude above ground level is maintained. To this end, we make use of the readily available Digital Elevation Models (DEMs). These models, which contain the terrain elevation, help us in dynamically adjusting the VTOL UAV altitude so that it remains nearly constant in relation to the ground. Results have shown that with the use of our method, the altitude can be maintained sufficiently constant while introducing a limited increase in flight time and battery consumption that is proportional to the terrain's irregularity. In a moderately changing terrain, the error could be reduced to just +/- 5 m., This work is derived from R&D projects RTI2018-096384-B-I00 and RTC2019-007159-5, funded by MCIN/AEI/10.13039/501100011033 and the European Regional Development Fund (ERDF) "A Way of Making Europe", and by the Conselleria de Educacion, Investigacion, Cultura y Deporte, Direccio General de Ciencia i Investigacio, Proyectos AICO/2020, Spain, under the Grant AICO/2020/302.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

COVIDSensing: Social Sensing strategy for the management of the COVID-19 crisis

  • Sepúlveda, Alicia
  • Muñoz, Andrés
  • Martínez-España, Raquel
  • Periñán-Pascual, Carlos|||0000-0002-6483-4712
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] The management of the COVID-19 pandemic has been shown to be critical for reducing its dramatic effects. Social sensing can analyse user-contributed data posted daily in social-media services, where participants are seen as Social Sensors. Individually, social sensors may provide noisy information. However, collectively, such opinion holders constitute a large critical mass dispersed everywhere and with an immediate capacity for information transfer. The main goal of this article is to present a novel methodological tool based on social sensing, called COVIDSensing. In particular, this application serves to provide actionable information in real time for the management of the socio-economic and health crisis caused by COVID-19. This tool dynamically identifies socio-economic problems of general interest through the analysis of people¿s opinions on social networks. Moreover, it tracks and predicts the evolution of the COVID-19 pandemic based on epidemiological figures together with the social perceptions towards the disease. This article presents the case study of Spain to illustrate the tool., This work is derived from R&D project RTI2018-096384-B-I00, as well as the Ramon y Cajal Grant RYC2018-025580-I, funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe, by the Spanish Agencia Estatal de Investigación (grant number PID2020- 112827GB-I00/ AEI/10.13039/501100011033), and by the Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital, Proyectos AICO/2020, Spain, under Grant AICO/2020/302.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of Clustering Algorithms on HPC Platforms

  • Cebrian, Juan M.
  • Imbernón, Baldomero
  • Soto, Jesús
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] Clustering algorithms are one of the most widely used kernels to generate knowledge from large datasets. These algorithms group a set of data elements (i.e., images, points, patterns, etc.) into clusters to identify patterns or common features of a sample. However, these algorithms are very computationally expensive as they often involve the computation of expensive fitness functions that must be evaluated for all points in the dataset. This computational cost is even higher for fuzzy methods, where each data point may belong to more than one cluster. In this paper, we evaluate different parallelisation strategies on different heterogeneous platforms for fuzzy clustering algorithms typically used in the state-of-the-art such as the Fuzzy C-means (FCM), the Gustafson-Kessel FCM (GK-FCM) and the Fuzzy Minimals (FM). The experimental evaluation includes performance and energy trade-offs. Our results show that depending on the computational pattern of each algorithm, their mathematical foundation and the amount of data to be processed, each algorithm performs better on a different platform., This work has been partially supported by the Spanish Ministry of Science and Innovation, under the Ramon y Cajal Program (Grant No. RYC2018-025580-I) and by the Spanish "Agencia Estatal de Investigacion" under grant PID2020-112827GB-I00 /AEI/ 10.13039/501100011033, and under grants RTI2018-096384-B-I00, RTC-2017-6389-5 and RTC2019-007159-5, by the Fundacion Seneca del Centro de Coordinacion de la Investigacion de la Region de Murcia under Project 20813/PI/18, and by the "Conselleria de Educacion, Investigacion, Cultura y Deporte, Direccio General de Ciencia i Investigacio, Proyectos AICO/2020", Spain, under Grant AICO/2020/302.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of the auto-ignition phenomenon of PRFs under HCCI conditions in a RCEM by means of spectroscopy

  • Desantes J.M.|||0000-0002-4124-9393
  • García-Oliver, José M|||0000-0002-2676-9681
  • Vera-Tudela-Fajardo, Walter Martin
  • López Pintor, Darío
  • Schneider, B.
  • Boulouchos, K.
An investigation of the effects of contour conditions and fuel properties on the auto-ignition and combustion process under HCCI conditions is presented in this study. A parametric variation of initial temperature, intake pressure, compression ratio, oxygen concentration and equivalence ratio has been carried out for Primary Reference Fuels in a Rapid Compression Expansion Machine while applying spectroscopy. The results have also been contrasted with natural chemiluminescence measurements. Additionally, the experiments have been simulated in CHEMKIN and the results derived from the optical techniques have been compared with the results from the chemical kinetics of the process, validating the chemical kinetic mechanism and an additional sub-model of excited OH . Two different scenarios can be seen according to the results from the spectrograph. For very lean or very low-temperature combustions no peak of OH is seen at 310 nm of wavelength, proving that the luminosity came from the CO continuum rather than from the OH . However, for more intense combustions (richer equivalence ratios, higher temperatures or lower EGR rates) spectrography shows a clear peak of OH that has much longer time of life than the corresponding to the CO continuum. The main chemical reaction that causes this two scenarios has been identified as H þ HO2 ) 2OH. The increase of relevance of this reaction at high combustion temperatures causes a higher OH accumulation, which leads to a brighter OH emission. Finally, for low temperature combustions the CO continuum out-shines the OH radiation so the light emitted by this radical cannot be detected by means of natural chemiluminescence. 201, The authors would like to thank different members of the LAV team of the ETH-Zurich for their contribution to this work. The authors are grateful to the Universitat Politecnica de Valencia for financing the Ph.D. studies of W. Vera-Tudela (FPI SP1 grant 30/05/2012) and his stay at ETH-Zurich (grant 30/12/2014). Finally, the authors would like to thank the Spanish Ministry of Education for financing the Ph.D. studies of Dario Lopez-Pintor (grant FPU13/02329) and his stay at ETH-Zurich (grant EST14/00626).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Flood Detection Using Real-Time Image Segmentation from Unmanned Aerial Vehicles on Edge-Computing Platform

  • Hernandez, Daniel
  • Cecilia-Canales, José María|||0000-0001-5648-214X
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
[EN] With the proliferation of unmanned aerial vehicles (UAVs) in different contexts and application areas, efforts are being made to endow these devices with enough intelligence so as to allow them to perform complex tasks with full autonomy. In particular, covering scenarios such as disaster areas may become particularly difficult due to infrastructure shortage in some areas, often impeding a cloud-based analysis of the data in near-real time. Enabling AI techniques at the edge is therefore fundamental so that UAVs themselves can both capture and process information to gain an understanding of their context, and determine the appropriate course of action in an independent manner. Towards this goal, in this paper, we take determined steps towards UAV autonomy in a disaster scenario such as a flood. In particular, we use a dataset of UAV images relative to different floods taking place in Spain, and then use an AI-based approach that relies on three widely used deep neural networks (DNNs) for semantic segmentation of images, to automatically determine the regions more affected by rains (flooded areas). The targeted algorithms are optimized for GPU-based edge computing platforms, so that the classification can be carried out on the UAVs themselves, and only the algorithm output is uploaded to the cloud for real-time tracking of the flooded areas. This way, we are able to reduce dependency on infrastructure, and to reduce network resource consumption, making the overall process greener and more robust to connection disruptions. Experimental results using different types of hardware and different architectures show that it is feasible to perform advanced real-time processing of UAV images using sophisticated DNN-based solutions., This work is derived from R&D projects RTI2018-096384-B-I00 and RTC2019-007159-5, as well as the Ramon y Cajal Grant RYC2018-025580-I, funded by MCIN/AEI/10.13039/501100011033, "FSE invest in your future" and "ERDF A way of making Europe", and by the "Conselleria de Educacion, Investigacion, Cultura y Deporte, Direccio General de Ciencia i Investigacio, Proyectos AICO/2020", Spain, under Grant AICO/2020/302.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Probabilistic analysis of the pseudo-n order adsorption kinetic model

  • Andreu-Vilarroig, C.|||0000-0001-5083-4837
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Sferle, Sorina Madalina|||0000-0002-2028-1191
  • Navarro-Quiles, A.
This work has been partially supported by the Spanish Ministerio de Economía, Industria y Competitividad (MINECO), the Agencia Estatal de Investigacion (AEI) and Fondo Europeo de Desarrollo Regional (FEDER UE) grant PID2020-115270GB-I00, the Generalitat Valenciana (grant AICO/2021/302), el Fondo Social Europeo y la Iniciativa de Empleo Juvenil EDGJID/2021/185 and la ayuda PRE2021-101090, financiado por MCIN/AEI/10.13039/501100011033 y por el FSE+.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced properties of alumina-aluminium titanate composites obtained by spark plasma reaction-sintering of slip cast green bodies

  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Rocha, Victoria G.
  • Fernandez, Adolfo
  • Molina, Tamara
  • Moreno, Rodrigo
Full dense alumina + 40 vol.% aluminium titanate composites were obtained by colloidal filtration and fast reaction-sintering of alumina/titania green bodies by spark plasma sintering at low temperatures (1250-1400 degrees C). The composites obtained had near-to-theoretical density (> 99%) with a bimodal grain size distribution. Phase development analysis demonstrated that aluminium titanate has already formed at 1300 degrees C. The mechanical properties such as Vickers hardness, flexural strength and fracture toughness of bulk composites are significantly higher than those reported elsewhere, e.g. the composite sintered at 1350 degrees C show values of about 24 GPa, 424 MPa and 5.4 MPa m(1/2), respectively. The improved mechanical properties of these composites are attributed to the enhanced densification and the finer and more uniform nanostructure achieved by non-conventional fast sintering of slip-cast dense green compacts. Crown Copyright (c) 2012 Published by Elsevier Ltd. All rights reserved., This study has been supported by the Spanish Ministry of Science and Innovation MAT2009-14369-C02-01 and MAT2009-14144-C03-02. A. Borrell, acknowledges the Spanish Ministry of Science and Innovation for her Juan de la Cierva contract (JCI-2011-10498) and the Generalitat Valenciana for the BEST/2012/302 grant and the financial support for ACOMP/2012/166.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Probabilistic analysis of a cantilever beam subjected to random loads via probability density functions

  • Cortés, J.-C.|||0000-0002-6528-2155
  • López-Navarro, Elena|||0000-0003-0164-9007
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
[EN] This paper addresses the probabilistic analysis of the deflection of a cantilever beam by means of a randomization of the classical governing fourth-order differential equation with null boundary conditions. The probabilistic study is based on the calculation of the first probability density function of the solution, which is a stochastic process, as well as the density function of further quantities of interest associated with this engineering problem such as the maximum slope and deflection at the free end of the cantilever beam, that are treated as random variables. In addition, the probability density function of the bending moment and the shear force will also be computed. The study takes extensive advantage of the so called Random Variable Transformation method, also known as Probability Transformation Method, that allows us to fully unify the probabilistic analysis in three relevant cases commonly studied in the deterministic setting. All the theoretical findings are illustrated via detailed numerical examples corresponding to each one of the three scenarios., This work has been supported by the grant PID2020-115270GB-I00 funded by MCIN/AEI/10.13039/501100011033 and the grant AICO/2021/302 (Generalitat Valenciana). Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exact response probability density function for beams subject to uncertain amplitude and position loads

  • Cortés, J.-C.|||0000-0002-6528-2155
  • López-Navarro, Elena|||0000-0003-0164-9007
  • Roselló, María-Dolores|||0000-0002-5724-7683
  • Falsone, Giovanni
  • Laudani, Rosella
[EN] In this paper, we present an extensive stochastic analysis of beam-like structures under uncertain loading conditions. At first, the exact closed-form probability density function expressions of the beam response in the case of a single random intensity load placed in a random position have been derived via the application of the Probability Transformation Method. Then, in a second random scenario, the load is modeled as a delta-correlated Poisson process. In this case, by representing the stochastic beam response processes as a filtered Poisson process, the characteristic function of the beam responses has been derived. The probability density function of beam responses will be numerically analyzed for two structural configurations: the statically determinate (cantilever beam) and the statically indeterminate (clamped-clamped beam)., This work has been supported by the grant PID2025-172735NB-I00 funded by MCIN/AEI, the grant AICO/2021/302 (Generalitat Valenciana ), and the Ferran Sunyer i Balaguer foundation (Borses FSB 2023). This work has been partially supported by the grant CIGE/2023/79 (Generalitat Valenciana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of non-homogeneous linear second-order discrete dynamical systems with uncertainties: solution and stability with applications

  • Cortés, J.-C.|||0000-0002-6528-2155
  • Sferle, Sorina Madalina|||0000-0002-2028-1191
  • Navarro-Quiles, Ana
[EN] We study, from a probabilistic standpoint, a full randomization of nonhomogeneous second-order linear difference equations assuming that its data (initial conditions, coefficients, and forcing term) are random variables. Our analysis consists of computing the so-called first probability density function of the solution, which is a stochastic process, and then analyzing the stability of the solution assuming that all data have an arbitrary joint probability density function. To achieve these goals, we take extensive advantage of the so-called random variable transformation technique. The theoretical results extend their deterministic counterpart, and then, they have many applications in real-world problems where uncertainty plays a key role. Our findings are first illustrated by means of several numerical examples, where different simulations are carried out, and, second, by means of a model belonging to biomathematics., Generalitat Valenciana, Grant/Award Number: AICO/2021/302; MCIN/AEI/10.13039/501100011033, Grant/Award Number: PID2020-115270GB--I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Decision Support System for Water Optimization in Anti-Frost Techniques by Sprinklers

  • Guillén-Navarro, Miguel A.
  • Martínez-España, Raquel
  • Bueno-Crespo, Andrés
  • Morales-García, Juan
  • Ayuso, Belén
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] Precision agriculture is a growing sector that improves traditional agricultural processes through the use of new technologies. In southeast Spain, farmers are continuously fighting against harsh conditions caused by the effects of climate change. Among these problems, the great variability of temperatures (up to 20 degrees C in the same day) stands out. This causes the stone fruit trees to flower prematurely and the low winter temperatures freeze the flower causing the loss of the crop. Farmers use anti-freeze techniques to prevent crop loss and the most widely used techniques are those that use water irrigation as they are cheaper than other techniques. However, these techniques waste too much water and it is a scarce resource, especially in this area. In this article, we propose a novel intelligent Internet of Things (IoT) monitoring system to optimize the use of water in these anti-frost techniques while minimizing crop loss. The intelligent component of the IoT system is designed using an approach based on a multivariate Long Short-Term Memory (LSTM) model, designed to predict low temperatures. We compare the proposed approach of multivariate model with the univariate counterpart version to figure out which model obtains better accuracy to predict low temperatures. An accurate prediction of low temperatures would translate into significant water savings, as anti-frost techniques would not be activated without being necessary. Our experimental results show that the proposed multivariate LSTM approach improves the univariate counterpart version, obtaining an average quadratic error no greater than 0.65 degrees C and a coefficient of determination R2 greater than 0.97. The proposed system has been deployed and is currently operating in a real environment obtained satisfactory performance., This work has been partially supported by the Spanish Ministry of Science and Innovation, under the Ramon y Cajal Program (Grant No. RYC2018-025580-I) and under grants RTI2018-096384-B-I00, RTC-2017-6389-5 and RTC2019-007159-5, by the Fundacion Seneca del Centro de Coordinacion de la Investigacion de la Region de Murcia under Project 20813/PI/18, and by the "Conselleria de Educacion, Investigacion, Cultura y Deporte, Direccio General de Ciencia i Investigacio, Proyectos AICO/2020", Spain, under Grant AICO/2020/302.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Finite element analysis of concrete-encased steel composite columns with off-center steel section

  • Lai, Binglin
  • Liew, Jat Yuen
  • Li, Shan
[EN] Concrete encased steel composite columns have been widely used in high-rise buildings and top-down constructions owning to excellent load-carrying capacity and fire resistance. However, double symmetric composite section is rarely achieved due to the off-center eccentricity of steel kingpost, which is a common problem in top-down constructions. EN1994-1-1 (EC4) simplified method does not provide any explicit provisions for this kind of irregular composite columns, and many designers address this issue by reducing it into a symmetrical cross-section for ease of simple calculation. This paper presents a general method based on nonlinear finite element modelling software ABAQUS to analyze the ultimate strength behavior of concrete-encased composite columns with asymmetrically placed steel section. The accuracy of the FE model is verified against existing test results. Parametric study is performed to further investigate the influence of steel section eccentricity on ultimate strength of stub columns under different loading conditions. A simplified method based on modification of EC4 design approach is developed to construct the moment-axial force interaction diagram. Accuracy of the proposed method is assessed by comparing the analytically predicted results with the numerical results. It is found that the proposed method can be adopted as a useful tool to predict the cross-section resistance of non-symmetrical concrete-encased steel composite columns., The research is funded by the Building & Construction Authority of Singapore under project grant R-302-000-168-409.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

First-order linear differential equations whose data are complex random variables: Probabilistic solution and stability analysis via densities

  • Cortés, J.-C.|||0000-0002-6528-2155
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
  • Navarro-Quiles, A.
[EN] Random initial value problems to non-homogeneous first-order linear differential equations with complex coefficients are probabilistically solved by computing the first probability density of the solution. For the sake of generality, coefficients and initial condition are assumed to be absolutely continuous complex random variables with an arbitrary joint probability density function. The probability of stability, as well as the density of the equilibrium point, are explicitly determined. The Random Variable Transformation technique is extensively utilized to conduct the overall analysis. Several examples are included to illustrate all the theoretical findings., This work has been supported by the Spanish Ministerio de Economia, Industria y Competitividad (MINECO), the Agencia Estatal de Investigacion (AEI) and Fondo Europeo de Desarrollo Regional (FEDER UE) grant PID2020-115270GB-I00 and Generalitat Valenciana (Grant AICO/2021/302).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Solving non homogeneous linear second order difference equations with random initial values: Theory and simulations

  • Cortés, J.-C.|||0000-0002-6528-2155
  • Sferle, Sorina Madalina|||0000-0002-2028-1191
  • Navarro-Quiles, A.
This work has been supported by the grant PID2020-115270GB-I00 funded by MCIN/AEI/10.13039/501100011033 and the grant AICO/2021/302 (Generalitat Valenciana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

AI-enabled autonomous drones for fast climate change crisis assessment

  • Hernández, Daniel
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Silla, Federico|||0000-0002-6435-1200
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] Climate change is one of the greatest challenges for modern societies. Its consequences, often associated with extreme events, have dramatic results worldwide. New synergies between different disciplines, including artificial intelligence (AI), Internet of Things (IoT), and edge computing can lead to radically new approaches for the real-time tracking of natural disasters that are also designed to reduce the environmental footprint. In this article, we propose an AI-based pipeline for processing natural disaster images taken from drones. The purpose of this pipeline is to reduce the number of images to be processed by the first responders of the natural disaster. It consists of three main stages: 1) a lightweight autoencoder based on deep learning; 2) a dimensionality reduction using the t-distributed stochastic neighbor embedding algorithm; and 3) a fuzzy clustering procedure. This pipeline is evaluated on several edge computing platforms with low-power accelerators to assess the design of intelligent autonomous drones to provide this service in real time. Our experimental evaluation focuses on flooding, showing that the amount of information to be processed is substantially reduced, whereas edge computing platforms with low-power graphics accelerators are placed as a compelling alternative for processing these heavy computational workloads, obtaining a performance loss of only 2.3 x compared to its cloud counterpart version, running both the training and inference steps., This work was supported in part by the Spanish Ministry of Science and Innovation under Grant RYC2018-025580-I, Grant RTI2018-096384-B-I00, and Grant RTC2019-007159-5; in part by the Fundacien Seneca under Project 20813/PI/18; and in part by the "Conselleria de Educacion, Investigacion, Cultura y Deporte, Direccio General de Ciencia i Investigacio, Proyectos" under Grant AICO/2020/302.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Uncertainty quantification for hybrid random logistic models with harvesting via density functions

  • Cortés, J.-C.|||0000-0002-6528-2155
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
  • Moscardó-García, A.
[EN] The so-called logistic model with harvesting, p '(t)=rp(t)(1-p(t)/K)-c(t)p(t), p(t(0))=p(0), is a classical ecological model that has been extensively studied and applied in the deterministic setting. It has also been studied, to some extent, in the stochastic framework using the Ito Calculus by formulating a Stochastic Differential Equation whose uncertainty is driven by the Gaussian white noise. In this paper, we present a new approach, based on the so-called theory of Random Differential Equations, that permits treating all model parameters as a random vector with an arbitrary join probability distribution (so, not just Gaussian). We take extensive advantage of the Random Variable Transformation method to probabilistically solve the full randomized version of the above logistic model with harvesting. It is done by exactly computing the first probability density function of the solution assuming that all model parameters are continuous random variables with an arbitrary join probability density function. The probabilistic solution is obtained in three relevant scenarios where the harvesting or influence function is mathematically described by discontinuous parametric stochastic processes having a biological meaning. The probabilistic analysis also includes the computation of the probability density function of the nontrivial equilibrium state, as well as the probability that stability is reached. All these results are new and extend their deterministic counterpart under very general assumptions. The theoretical findings are illustrated via two numerical examples. Finally, we show a detailed example where results are applied to describe the dynamics of stock of fishes over time using real data. (c) 2021 Elsevier Ltd. All rights reserved, This work has been partially supported by the grant PID2020-115270GB-I0 0 funded by MCIN/AEI/10.13039/501100011033 and the grant AICO/2021/302 (Generalitat Valenciana)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Probabilistic analysis of a foundational class of generalized second-order linear differential equations in Classic Mechanics

  • Burgos-Simon, Clara|||0000-0001-6385-4263
  • Cortés, J.-C.|||0000-0002-6528-2155
  • López-Navarro, Elena|||0000-0003-0164-9007
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
  • Pinto, C. M. A.
[EN] A number of relevant models in Classical Mechanics are formulated by means of the differential equation y ''(t) + At-beta y(t) = 0. In this paper, we improve the results recently established for a randomized reformulation of this model that includes a generalized derivative. The stochastic analysis permits solving that generalized model by computing reliable approximations of the probability density function of the solution, which is a stochastic process. The approach avoids constructing these approximations from limited statistical punctual information and the Principle of Maximum Entropy by directly constructing a sequence of approximations using the Probabilistic Transformation Method. We prove that these approximations converge to the exact density under mild conditions on the data. Finally, several numerical examples illustrate our theoretical findings., This paper has been supported by the grant PID2020-115270GB-I00 funded by MCIN/AEI/10.13039/501100011033 and by the grant AICO/2021/302 (Generalitat Valenciana). The author CP was partially supported by CMUP (UID/-MAT/00144/2013), which is funded by Fundacao para a Ciencia e Tecnologia (FCT) (Portugal) with national (MEC) and European structural funds European Regional Development Fund (FEDER), under the partnership agreement PT2020.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of the contribution of Ito to repolarization in canine ventricular myocardium

  • Virag, L.
  • Jost, N.
  • Papp, R.
  • Koncz, I.
  • Kristof, A.
  • Kohajda, Z.
  • Harmati, G.
  • Carbonell Pascual, Beatriz
  • Papp, J. G.
  • Nanasi, P. P.
  • Varro, A.
  • Ferrero De Loma-Osorio, José María|||0000-0003-4200-9225
[EN] BACKGROUND AND PURPOSE The contribution of the transient outward potassium current (Ito) to ventricular repolarization is controversial as it depends on the experimental conditions, the region of myocardium and the species studied. The aim of the present study was therefore to characterize Ito and estimate its contribution to repolarization reserve in canine ventricular myocardium. EXPERIMENTAL APPROACH Ion currents were recorded using conventional whole-cell voltage clamp and action potential voltage clamp techniques in canine isolated ventricular cells. Action potentials were recorded from canine ventricular preparations using microelectrodes. The contribution of Ito to repolarization was studied using 100 µM chromanol 293B in the presence of 0.5 µM HMR 1556, which fully blocks IKs. KEY RESULTS The high concentration of chromanol 293B used effectively suppressed Ito without affecting other repolarizing K+ currents (IK1, IKr, Ip). Action potential clamp experiments revealed a slowly inactivating and a ‘late’ chromanol-sensitive current component occurring during the action potential plateau. Action potentials were significantly lengthened by chromanol 293B in the presence of HMR 1556. This lengthening effect induced by Ito inhibition was found to be reverse rate-dependent. It was significantly augmented after additional attenuation of repolarization reserve by 0.1 µM dofetilide and this caused the occurrence of early afterdepolarizations. The results were confirmed by computer simulation. CONCLUSIONS AND IMPLICATIONS The results indicate that Ito is involved in regulating repolarization in canine ventricular myocardium and that it contributes significantly to the repolarization reserve. Therefore, blockade of Ito may enhance pro-arrhythmic risk., This work was supported by grants from the Hungarian Scientific Research Fund (OTKA K-68911, OTKA K-68457, OTKA K-82079 and OTKA CNK-77855); Hungarian Ministry of Health (ETT 302-03/2009, ETT 306-03/2009); the National Office for Research and Technology -National Technology Programme (TECH_ 08_ A1_ CARDIO08); National Development Agency (TAMOP-4.2.2-08/1-2008-0013 and TAMOP4.2.1/B-09/1/KONV-2010-0005); European Community (EU FP7 grant ICT-2008-224381, preDiCT); the Hungarian Academy of Sciences; the Janos Bolyai Research Scholarship (to NJ); the Spanish Ministry of Science and Innovation (TEC2008-0290), and from the Generalitat Valenciana (BEST/2010/102). We wish to thank Mrs Zsuzsa Moln~r for her technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving prediction of COVID-19 evolution by fusing epidemiological and mobility data

  • García-Cremades, Santi
  • Morales-García, Juan
  • Hernández-Sanjaime, Rocío
  • Martínez-España, Raquel
  • Bueno-Crespo, Andrés
  • López-Espín, José J.
  • Hernández-Orallo, Enrique|||0000-0002-3284-561X
  • Cecilia-Canales, José María|||0000-0001-5648-214X
[EN] We are witnessing the dramatic consequences of the COVID¿19 pandemic which, unfortunately, go beyond the impact on the health system. Until herd immunity is achieved with vaccines, the only available mechanisms for controlling the pandemic are quarantines, perimeter closures and social distancing with the aim of reducing mobility. Governments only apply these measures for a reduced period, since they involve the closure of economic activities such as tourism, cultural activities, or nightlife. The main criterion for establishing these measures and planning socioeconomic subsidies is the evolution of infections. However, the collapse of the health system and the unpredictability of human behavior, among others, make it difficult to predict this evolution in the short to medium term. This article evaluates different models for the early prediction of the evolution of the COVID¿19 pandemic to create a decision support system for policy¿makers. We consider a wide branch of models including artificial neural networks such as LSTM and GRU and statistically based models such as autoregressive (AR) or ARIMA. Moreover, several consensus strategies to ensemble all models into one system are proposed to obtain better results in this uncertain environment. Finally, a multivariate model that includes mobility data provided by Google is proposed to better forecast trend changes in the 14¿day CI. A real case study in Spain is evaluated, providing very accurate results for the prediction of 14¿day CI in scenarios with and without trend changes, reaching 0.93 R2, 4.16 RMSE and 1.08 MAE., This work has been partially supported by the Spanish Ministry of Science and Innovation, under Grants RYC2018-025580-I, RTI2018-096384-B-I00, RTC-2017-6389-5 and RTC2019-007159-5, by the Fundacion Seneca del Centro de Coordinacion de la Investigacion de la Region de Murcia under Project 20813/PI/18, by the "Conselleria de Educacion, Investigacion, Cultura y Deporte, Direccio General de Ciencia i Investigacio, Proyectos AICO/2020", Spain, under Grant AICO/2020/302 and a predoctoral contract by the Generalitat Valenciana and the European Social Fund under Grant ACIF/2018/219.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

EPD and Spark Plasma Sintering of bimodal alumina/titania concentrated suspensions

  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Rocha, Victoria G.
  • Fernández, Adolfo
  • Molina, Tamara
  • Moreno, Rodrigo
Alumina-aluminium titanate (A-AT) composites and laminates have been recently investigated because they can provide improved flaw tolerance and toughness associated to a microcracking mechanism. A-AT composites have been produced by slip casting and reaction sintering of submicron sized alumina and titania powders. This work deals with the preparation of thick self-sustained A-AT films from mixtures of submicron sized alumina and nanosized titania powders and further sintering by conventional and non-conventional (spark plasma sintering, SPS) methods. Suspensions were prepared in water to high solid loadings, up to 50 vol.%. Self-sustained films were obtained by aqueous electrophoretic deposition (EPD) using graphite substrates under constant current density conditions. The evolution of mass per unit area with current density and deposition time was recorded. The films were characterized in the green state and after sintering at different temperatures (1300-1400) degrees C. Fully dense A-AT reaction sintered materials were obtained at low temperature by SPS, This study has been supported by the Spanish Ministry of Science and Innovation MAT2009-14369-C02-01 and MAT2009-14144-C03-02. A. Borrell, acknowledges the Spanish Ministry of Science and Innovation for her Juan de la Cierva contract (JCI-2011-10498) and the Generalitat Valenciana for the BEST/2012/302 grant and the financial support for ACOMP/2012/166.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

LADEA: A Software Infrastructure for Audio Delivery and Analytics

  • Nakamura, Kiyoshy
  • Hernandez, Daniel
  • Zennaro, Marco
  • Cecilia-Canales, José María|||0000-0001-5648-214X
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
[EN] The LoRa technology enables long distance links with reduced power consumption at low cost, the main limitation being the low bandwidth that it offers. With LoRa, remote locations, like rural areas, can benefit from connectivity based services that would otherwise be impossible. In this work, we describe a LoRa architecture that can include generic external data sources using an MQTT-based interface. We particularly focus on audio sources aiming to two basic services: a voice messaging system that allows users who cannot read or write to send voice notes, and an audio compression service to extract the main features from the audio input to use it for developing intelligent ML-based audio analytics., This work has been partially supported by the Spanish Ministry of Science and Innovation, under the Ramon y Cajal Program (Grant No. RYC2018-025580-I) and under grants RTI2018-096384-B-I00, RTC-2017-6389-5 and RTC2019-007159-5, by the Fundacion Seneca del Centro de Coordinacion de la Investigacion de la Region de Murcia under Project 20813/PI/18, and by the "Conselleria de Educacion, Investigacion, Cultura y Deporte, Direccio General de Ciencia i Investigacio, Proyectos AICO/2020", Spain, under Grant AICO/2020/302.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Forward uncertainty quantification in random differential equation systems with delta-impulsive terms: Theoretical study and applications

  • Bevia-Escrig, Vicente-José
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
[EN] This contribution aims at studying a general class of random differential equations with Dirac-delta impulse terms at a finite number of time instants. Our approach directly addresses calculating the so-called first probability density function, from which all the relevant statistical information about the solution, a stochastic process, can be extracted. We combine the Liouville partial differential equation and the random variable transformation method to conduct our study. Finally, all our theoretical findings are illustrated on two stochastic models, widely used in mathematical modeling, for which numerical simulations are carried out., Spanish Ministerio de Economia, Industria y Competitividad (MINECO); Agencia Estatal de Investigacion (AEI); Fondo Europeo de Desarrollo Regional (FEDER UE), Grant/Award Number: PID2020-115270GB-I00; Generalitat Valenciana, Grant/Award Number: AICO/2021/302; el Fondo Social Europeo y la Iniciativa de Empleo Juvenil, Grant/Award Number: EDGJID/2021/185; Ayuda a Primeros Proyectos de Investigacion, Grant/Award Number: PAID-06-22; Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia (UPV).
RIO. Repositorio Institucional Olavide
Publicación Artículo científico (JournalArticle)

Insulae hereditariae

  • Periñán Gómez, Bernardo|||0000-0002-1103-4797
RESUMEN: El desarrollo urbanístico de Roma dio lugar a nuevas necesidades sociales, como las insulae o edificios de varias plantas que podían contener a su vez varias unidades habitacionales. En este trabajo se presta atención al eco de dicho fenómeno en los textos jurisprudenciales sobre materia sucesoria y otros negocios mortis causa. Ello refuerza especialmente la identificación de la insula como res diferenciada al considerarla un objeto cierto que trasciende la mera actividad inter vivos. ABSTRACT: The urban development of Rome gave rise to new social needs, such as the insulae or family housing units built into buildings of the same name. In this work, attention is paid to the echo of this phenomenon in the jurisprudential texts on succession matters and other mortis causa negotia. This especially reinforces the identification of the insula as a differentiated res by considering it a certain object that transcends the mere inter vivos activity.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Analyzing optimization results by using a pre-programmed GUI. Case of study: Optimization of sustainable water management in the shale gas production, Water Management GUI

  • Caballero, José A.
  • Labarta, Juan A.
  • Salcedo Díaz, Raquel
  • Ruiz-Femenia, Rubén
  • Caballero, José A.|||/items/0b1eee1e-07bb-4833-80b0-a697525119aa
  • Labarta, Juan A.|||/items/d90ca80b-62a8-4717-af5f-1e651b3d7bac
  • Ruiz-Femenia, Rubén|||/items/683ccf87-4e50-4796-8968-7b489c75cad8
  • Salcedo Díaz, Raquel|||/items/4d7bda9d-94af-448a-b11e-6dd32db75515
To help students, teachers, and researchers in the task of analyzing optimization results in a very easy way, a graphical user interface (GUI) developed in MatLab®, for the optimal Shale Gas Water Management including economic and environmental impacts by using the “sustainability profit” [1-4], publicly available online in the Institutional Repository of the University of Alicante (RUA, https://rua.ua.es/), can be used as friendly teaching tool. This tool allows the definition of different options in order to analyze the effect in the optimal solution obtained, to address water planning decisions. The model used is a simplified version of the non-convex disjunctive MINLP model presented previously in the paper «Holistic Planning Model for Sustainable Water Management in the Shale Gas Industry» [2, 4], to maximize the “sustainability profit” determining flowback destination (reuse, degree of treatment or disposal), the fracturing schedule, fracturing fluid composition and the number of water storage tanks needed at each period of time. The model includes the effect of high concentration of total dissolved solids (TDS), and its variation over time. The superstructure defined allows different options for wastewater management: a) direct reuse; b) treatment (including possible different pre-treatments, softening and desalination technologies; and c) send to disposal sites. Another example of successful use of MatLab@ graphical user interfaces in Chemical Engineering teaching and researching, is for instance, the Topological and Thermodynamic Analysis of Phase Equilibria [5-8]. References [1] J.A. Caballero, J.A. Labarta. RUA 2018: http://hdl.handle.net/10045/81908. [2] A. Carrero-Parreño, J.A. Labarta, R. Salcedo-Díaz, R. Ruiz-Femenia, V.C. Onishi, J.A. Caballero, I.E. Grossmann, Ind. Eng. Chem. Res. 2018, 57 13131-13143. https://doi.org/10.1021/acs.iecr.8b02055. [3] A. Carrero-Parreño. RUA 2018: http://hdl.handle.net/10045/102228. [4] Zore, Ž.; Čuček, L.; Kravanja, Z. Comput. Chem. Eng. 2017, 102, 139. doi: https://doi.org/10.1016/j.compchemeng.2016.12.003. [5] J.A. Labarta, 2023. https://zenodo.org/records/7628814. [6] A. Marcilla, J.A. Labarta, M.M Olaya, 2017, Fluid Phase Equilibria. 433, 243-252. https://doi.org/10.1016/j.fluid.2016.11.009. [7] J.A. Labarta, M.M. Olaya, A. Marcilla, 2022, AIChE Journal, 68(10), e17805. doi: https://doi.org/10.1002/aic.17805. [8] J.A. Labarta, J.A. Caballero, A. Marcilla, 2023, Computer Aided Chemical Engineering, 52, 3457-3462. https://doi.org/10.1016/B978-0-443-15274-0.50552-7 (RUA: http://rua.ua.es/dspace/handle/10045/134753).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Epicatechin induces NF-kB, activator protein-1 (AP-1) and nuclear transcription factor erythroid 2p45-related factor-2 (Nrf2) via phosphatidylinositol-3-kinase/protein kinase B (PI3K/AKT) and extracellular regulated kinase (ERK) signalling in HepG2 cells

  • Granado-Serrano, Ana Belén
  • Martín, María Angeles
  • Haegeman, Guy
  • Goya, Luis
  • Bravo, Laura
  • Ramos, Sonia
The dietary flavonoid epicatechin has been reported to exhibit a wide range of biological activities. The objective of the present study was to investigate the time-dependent regulation by epicatechin on the activity of the main transcription factors (NF-kB, activator protein-1 (AP-1) and nuclear transcription factor erythroid 2p45-related factor (Nrf2)) related to antioxidant defence and survival and proliferation pathways in HepG2 cells. Treatment of cells with 10mM-epicatechin induced the NF-kB pathway in a time-dependent manner characterised by increased levels of IkB kinase (IKK) and phosphorylated inhibitor of kB subunit-a (p-IkBa) and proteolytic degradation of IkB, which was consistent with an up-regulation of the NF-kB-binding activity. Time-dependent activation of the AP-1 pathway, in concert with enhanced c-Jun nuclear levels and induction of Nrf2 translocation and phosphorylation were also demonstrated. Additionally, epicatechin-induced NF-kB and Nrf2 were connected to reactive oxygen species intracellular levels and to the activation of cell survival and proliferation pathways, being phosphatidylinositol-3-kinase/protein kinase B (PI3K/AKT) and extracellular regulated kinase (ERK) associated to Nrf2 modulation and ERK to NF-kB induction. These data suggest that the epicatechin-induced survival effect occurs by the induction of redox-sensitive transcription factors through a tight regulation of survival and proliferation pathways., The present study was supported by the grants AGL2004-302, AGL2007-64042 and CSD2007-00063 from the Spanish Ministry of Science and Innovation (CICYT) and 200870 I198 (CSIC). A. B. G.-S. is a predoctoral fellow of the Spanish Ministry of Science and Education.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Recent progress in the field of neoglycoconjugate chemistry

  • Jiménez-Castells, Carmen
  • Defaus, Sira
  • Andreu Martínez, David
  • Gutiérrez Gallego, Ricardo, 1968-
Glycosylation is probably the most complex secondary gene event that affects the vast majority of proteins in nature resulting in the occurrence of a heterogeneous mixture of glycoforms for a single protein. Many functions are exerted by single monosaccharides, well-defined oligosaccharides, or larger glycans present in these glycoproteins. To unravel these functions it is of the utmost importance to prepare well-defined single glycans conjugated to the underlying aglycon. In this review, the most recent developments are described to address the preparation of carbohydrate-amino acid (glyco-conjugates). Naturally occurring N- and O-linked glycosylation are described and the preparation of non-natural sugar-amino acid linkages are also included., The authors would like to acknowledge the financial support received from the European Union (HEALTH-F3-2008-223414), Ministerio de Ciencia e Innovación (BIO2008-04487-CO3-02 and BIO2009-08983) and Generalitat de Catalunya (2009 SGR 492)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Epicatechin induces NF-kB, activator protein-1 (AP-1) and nuclear transcription factor erythroid 2p45-related factor-2 (Nrf2) via phosphatidylinositol-3-kinase/protein kinase B (PI3K/AKT) and extracellular regulated kinase (ERK) signalling in HepG2 cells

  • Granado-Serrano, Ana Belén
  • Martín, María Angeles
  • Haegeman, Guy
  • Goya, Luis
  • Bravo, Laura
  • Ramos, Sonia
The dietary flavonoid epicatechin has been reported to exhibit a wide range of biological activities. The objective of the present study was to investigate the time-dependent regulation by epicatechin on the activity of the main transcription factors (NF-kB, activator protein-1 (AP-1) and nuclear transcription factor erythroid 2p45-related factor (Nrf2)) related to antioxidant defence and survival and proliferation pathways in HepG2 cells. Treatment of cells with 10mM-epicatechin induced the NF-kB pathway in a time-dependent manner characterised by increased levels of IkB kinase (IKK) and phosphorylated inhibitor of kB subunit-a (p-IkBa) and proteolytic degradation of IkB, which was consistent with an up-regulation of the NF-kB-binding activity. Time-dependent activation of the AP-1 pathway, in concert with enhanced c-Jun nuclear levels and induction of Nrf2 translocation and phosphorylation were also demonstrated. Additionally, epicatechin-induced NF-kB and Nrf2 were connected to reactive oxygen species intracellular levels and to the activation of cell survival and proliferation pathways, being phosphatidylinositol-3-kinase/protein kinase B (PI3K/AKT) and extracellular regulated kinase (ERK) associated to Nrf2 modulation and ERK to NF-kB induction. These data suggest that the epicatechin-induced survival effect occurs by the induction of redox-sensitive transcription factors through a tight regulation of survival and proliferation pathways., The present study was supported by the grants AGL2004-302, AGL2007-64042 and CSD2007-00063 from the Spanish Ministry of Science and Innovation (CICYT) and 200870 I198 (CSIC). A. B. G.-S. is a predoctoral fellow of the Spanish Ministry of Science and Education.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Surface-based and mass spectrometric approaches to deciphering sugar-protein interactions in a galactose-specific agglutinin

  • Jiménez-Castells, Carmen
  • Defaus, Sira
  • Moise, Adrian
  • Przbylski, Michael
  • Andreu Martínez, David
  • Gutiérrez Gallego, Ricardo, 1968-
Over the last decades, sugar-protein interactions have been acknowledged as key players in numerous biological recognition processes, such as those occurring during pathogen-host adhesion or fertilization. Consequently, interest in finding powerful and nanosized tools to study glycan-protein interactions in detail has increased significantly in recent years. Here, two complementary approaches are applied to characterize glycan-protein interactions with high sensitivity, low sample consumption, and without the need for sample labelling: surface plasmon resonance (SPR) and an approach that combines limited proteolysis and mass spectrometry. Combination of these two approaches to investigate glycan-protein interactions allows (1) to characterize interactions through kinetic and thermodynamic parameters, (2) to capture efficiently the carbohydrate-binding protein, and (3) to identify the interacted protein and its carbohydrate binding site by mass spectrometry. As a proof of principle, the interaction of the galactosespecific legume lectin Erythrina cristagalli agglutinin with several sugars has been characterized indepth by means of these two approaches., This work was supported by the Spanish Ministry of Science and Innovation (projects BIO2008-04487-CO3-02 and HA2007-0021 to D.A. and BIO2009-08983 to R.G.G., and predoctoral fellowship BES-2006-12879 to C.J.C.), by the Spanish Ministry of Economy and Competitiveness (project SAF2011-24899 to D.A.), and by the Deutsche Forschungsgemeinschaft (PR-175/14-1) and the EU (MSLife).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Parietaria major allergens vs pollen in the air we breathe

  • De Linares Fernández, Concepción|||0000-0002-2047-3337
  • Alcázar, Purificación
  • Valle, Ana M.
  • Díaz de la Guardia, Consuelo
  • Galan Soldevilla, Carmen
Parietaria and Urtica are the genera from the Urticaceae family more frequent in Mediterranean and Atlantic areas. Moreover, both genera share pollination periods, and their pollen (of the main species) is so similar that there is no aerobiological evidence of the proportion of each of them in the airborne pollen identification, except in the case of U. membranacea. However, Parietaria is one of the most important causes of pollinosis and Urtica is not. Our aim is determine if airborne Urticaceae pollen concentrations show the aerodynamics of the two major allergens of Parietaria (Par j 1 and Par j 2) as well as the allergen distribution in the different-sized particles. The air was sampled during the pollination period of Urticaceae using Hirst Volumetric Sampler and Andersen Cascade Impactor in two cities of Southern Spain (Córdoba and Granada). The samples were analysed by the methodology proposed by the Spanish Aerobiology Network (REA) and the minimum requirements of the European Aeroallergen Society (EAS) for pollen, and by ELISA immunoassay for allergens. The patterns of airborne pollen and Par j 1-Par j 2 were present in the air during the studied period, although with irregular oscillations. Urticaceae pollen and Par j 1-Par j 2 allergens located in PM2.5 showed positive and significant correlation during the period with maximum concentrations (March to April). Parietaria aeroallergens show similar pattern of Urticaceae airborne pollen. Urticaceae pollen calendar is as a good tool for allergy prevention. On the other hand, important concentrations of Par j 1 and Par j 2 were located in the breathable fraction (PM2.5), which could explain the asthmatic symptoms in the allergic population to Parietaria.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Magnetic enhancement during the crystallization of ferrihydrite at 25 and 50°C

  • Cabello, E.
  • Morales, M. P.
  • Serna, C. J.
  • Barrón, V.
  • Torrent, J.
Soil formation usually results in an increase in magnetic susceptibility. The magnetic properties of the products of transformation of ferrihydrite, a typical precursor of other soil Fe oxides, were examined in the present work. Synthetic 2-line ferrihydrite was aged at two temperatures (25 and 50°C) and two different relative humidities (80 and 100%) in the presence of silicate, phosphate, citrate, and tartrate as adsorbed ligands (molar anion/Fe ratio = 1-3%). The ligands delayed or prevented the transformation of ferrihydrite to hematite. The magnetic susceptibility of the ferrihydrite transformation products increased with aging, the rate of increase depending on the type of ligand added and its concentration. The largest increase in magnetic susceptibility, sixfold, was obtained with ferrihydrite in a citrate/Fe ratio of 1%, after 1500 days. The resulting magnetic products exihibited superparamagnetic behavior at room temperature and high coercivity at 5 K. The formation of an intermediate ferrimagnetic phase in the ferrihydrite-to-hematite transformation might explain the magnetic enhancement observed in many aerobic soils lacking other sources of magnetic minerals.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Exploring New Kingdoms: The Role of Extracellular Vesicles in Oxi-Inflamm-Aging Related to Cardiorenal Syndrome

  • Alique Aguilar, Matilde|||0000-0002-7912-1133
The incidence of age associated chronic diseases has increased in recent years. Although several diverse causes produce these phenomena, abundant evidence shows that oxidative stress plays a central role. In recent years, numerous studies have focused on elucidating the role of oxidative stress in the development and progression of both aging and chronic diseases, opening the door to the discovery of new underlying mechanisms and signaling pathways. Among them, senolytics and senomorphics, and extracellular vesicles offer new therapeutic strategies to slow the development of aging and its associated chronic diseases by decreasing oxidative stress. In this review, we aim to discuss the role of extracellular vesicles in human cardiorenal syndrome development and their possible role as biomarkers, targets, or vehicles of drugs to treat this syndrome., Instituto de Salud Carlos III, Sociedad Española de Nefrología, Ministerio de Asuntos Económicos y Transformación Digital, Ministerio de Cultura y Deporte, Ministerio de Ciencia e Innovación, Comunidad de Madrid