Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 51
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Analytical ray transfer matrix for the crystalline lens

  • Navarro, Rafael
  • Lockett-Ruiz, Verónica
  • López García, José Luis
We present the formulation of a paraxial ray transfer or ABCD matrix for onion-type GRIN lenses. In GRIN lenses, each iso-indicial surface (IIS) can be considered a refracting optical surface. If each IIS is a shell or layer, the ABCD matrix of a GRIN lens is computed by multiplying a typically high number of translation and refraction matrices corresponding to the K layers inside the lens. Using a differential approximation for the layer thickness, this matrix product becomes a sum. The elements A, B, C, and D of the approximated GRIN ray transfer matrix can be calculated by integrating the elements of a single-layer matrix. This ABCD matrix differs from a homogeneous lens matrix in only one integration term in element C, corresponding to the GRIN contribution to the lens power. Thus the total GRIN lens power is the sum of the homogeneous lens power and the GRIN contribution, which offers a compact and simple expression for the ABDC matrix. We then apply this formulation to the crystalline lens and implement both numerical and analytical integration procedures to obtain the GRIN lens power. The analytical approximation provides an accurate solution in terms of Gaussian hypergeometric functions. Last, we compare our numerical and analytical procedures with published ABCD matrix methods in the literature, and analyze the effect of the iso-indicial surface’s conic constant (Q) and inner curvature gradient (G) on the lens power for different lens models., Ministerio de Ciencia e Innovación (PID2019-405 107058RB-100, PGC2018-095795B-I00); HORIZON EUROPE Marie Sklodowska-Curie Actions (956720).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Analytical ray transfer matrix for the crystalline lens

  • Navarro, Rafael
  • Lockett-Ruiz, Veronica
  • López, José L.
We present the formulation of a paraxial ray transfer or ABCD matrix for onion-type GRIN lenses. In GRIN lenses, each iso-indicial surface (IIS) can be considered a refracting optical surface. If each IIS is a shell or layer, the ABCD matrix of a GRIN lens is computed by multiplying a typically high number of translation and refraction matrices corresponding to the K layers inside the lens. Using a differential approximation for the layer thickness, this matrix product becomes a sum. The elements A, B, C, and D of the approximated GRIN ray transfer matrix can be calculated by integrating the elements of a single-layer matrix. This ABCD matrix differs from a homogeneous lens matrix in only one integration term in element C, corresponding to the GRIN contribution to the lens power. Thus the total GRIN lens power is the sum of the homogeneous lens power and the GRIN contribution, which offers a compact and simple expression for the ABDC matrix. We then apply this formulation to the crystalline lens and implement both numerical and analytical integration procedures to obtain the GRIN lens power. The analytical approximation provides an accurate solution in terms of Gaussian hypergeometric functions. Last, we compare our numerical and analytical procedures with published ABCD matrix methods in the literature, and analyze the effect of the iso-indicial surface’s conic constant (Q) and inner curvature gradient (G) on the lens power for different lens models., Ministerio de Ciencia e Innovación (PID2019-405 107058RB-100, PGC2018-095795B-I00); HORIZON EUROPE Marie Sklodowska-Curie Actions (956720)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical and motor changes associated with lighting and near vision tasks in electronic devices

  • Orduna-Hospital, Elvira
  • Safarian Baloujeh, Ebrahim
  • Navarro, Rafael
  • Sánchez-Cano, Ana I.
[Purpose]: To assess optical and motor changes associated with near vision reading under different controlled lighting conditions performed with two different types of electronic screens., [Methods]: Twenty-four healthy subjects with a mean age of 22.9±2.3 years (18-33) participated in this study. An iPad and an e-ink reader were chosen to present calibrated text, and each task lasted 5 minutes evaluating both ambient illuminance level and luminance of the screens., [Results]: Eye-tracker data revealed a higher number of saccadic eye movements under minimum luminance than under maximum luminance. The results showed statistically significant differences between the iPad (p=0.016) and the e-ink reader (p=0.002). The length of saccades was also higher for the minimum luminance level for both devices: 6.2±2.8 mm and 8.2±4.2 mm (e-ink max vs min), 6.8±2.9 mm and 7.6±3.6 mm (iPad max vs min), and blinking rate increased significantly for lower lighting conditions., [Conclusions]: Performing reading tasks on electronic devices is highly influenced by both the configuration of the screens and the ambient lighting, meanwhile, low differences in visual quality that are transient in healthy young people, were found., This research was funded by the Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación of the Spanish Government (Grant PID2019-107058RB-I00 funded by MCIN/AEI/10.13039/501100011033), the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 956720, Gobierno de Aragón-Departamento de Ciencia, Universidad y Sociedad del Conocimiento-No LMP39_21, Fundación Ibercaja and University of Zaragoza No JIUZ-2021-CIE-03 and Ayudas para la adquisición de infraestructura de investigación (Modalidad A). Contrato Programa Plan De Inversiones e Investigación Gobierno de Aragón-Universidad de Zaragoza. Fondos Feder-2020., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The influence of variations in ocular biometric and optical parameters on differences in refractive error

  • Farzanfar, Arezoo
  • Lockett-Ruiz, Veronica
  • Navarro, Rafael
  • Koppen, Carina
  • Rozema, Jos J.
[Purpose] To present a paraxial method to estimate the influence of variations in ocular biometry on changes in refractive error (S) at a population level and apply this method to literature data., [Methods] Error propagation was applied to two methods of eye modelling, referred to as the simple method and the matrix method. The simple method defines S as the difference between the axial power and the whole-eye power, while the matrix method uses more accurate ray transfer matrices. These methods were applied to literature data, containing the mean ocular biometry data from the SyntEyes model, as well as populations of premature infants with or without retinopathy, full-term infants, school children and healthy and diabetic adults., [Results] Applying these equations to 1000 SyntEyes showed that changes in axial length provided the most important contribution to the variations in refractive error (57%–64%), followed by lens power/gradient index power (16%–31%) and the anterior corneal radius of curvature (10%–13%). All other components of the eye contributed <4%. For young children, the largest contributions were made by variations in axial length, lens and corneal power for the simple method (67%, 23% and 8%, respectively) and by variations in axial length, gradient lens power and anterior corneal curvature for the matrix method (55%, 21% and 14%, respectively). During myopisation, the influence of variations in axial length increased from 54.5% to 73.4%, while changes in corneal power decreased from 9.82% to 6.32%. Similarly, for the other data sets, the largest contribution was related to axial length., [Conclusions] This analysis confirms that the changes in ocular refraction were mostly associated with variations in axial length, lens and corneal power. The relative contributions of the latter two varied, depending on the particular population., This project received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska Curie grant agreement No. 956720., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Wavefront changes during a sustained reading task in presbyopic eyes

  • Safarian Baloujeh, Ebrahim
  • González-Méijome, José M.
This article belongs to the Special Issue Recent Advances in Optical Imaging and 3D Display Technologies., The objective of this study was to assess the effect of sustained reading on the temporal changes in the wavefront error in the presbyopic eye. The wavefront aberration of the eyes was measured using an IRX3 Shack–Hartmann aberrometer before and after (immediately, 5 min, and 10 min after) a reading task. Temporal changes in C02, C04, and C−13 coefficient values of the eyes were plotted, showing a predominant number of V-shaped patterns (for C04 and C−13) and inverse V-shaped patterns (for C02) among the study group, and the percentages (between 27 and 73%) were reported. The median of the total RMS of aberrations and the RMS of HOA (higher-order aberrations), which included comatic (3rd order) and spherical-like aberrations (4th and 6th order), increased immediately after finishing the near-vision reading task and then decreased. The median of RMS of comatic aberrations had a similar pattern of variations, while the median of RMS of spherical-like aberrations displayed an opposite pattern. Simulating the aberration changes due to lens decentration caused by relaxed zonules during 4 D accommodation in an eye model demonstrated that the expected range of changes for the vertical coma and spherical aberrations are in the order of 0.001 and 0.01 μm, respectively, which could justify why the observed changes were not statistically significant. The observed dynamic changes in HOA might be linked to the biomechanical characteristics and alterations in the displacement of the crystalline lens following prolonged near-vision tasks in presbyopic people. Although some predominant patterns under some conditions were shown, they exhibit considerable inter-subject and inter-ocular variability. This might be due to slight misalignments while fixating on the internal extended object in the aberrometer., This research has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 956720., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of small angle misalignments on ocular wavefront Zernike coefficients

  • Safarian Baloujeh, Ebrahim
  • Ávila, Francisco J.
  • González-Méijome, José M.
This article belongs to the Special Issue Technologies and Applications of Biophotonics., The data presented in this study are available on request from the corresponding author., [Purpose]: To assess the possible impact of minor changes in fixation on wavefront measurements as a potential constraint in detecting subtle temporal variations in ocular wavefront error., [Methods]: Twelve healthy subjects with an average age of 36.3 ± 8.8 were instructed to put their heads in the aberrometer’s chin-rest and look at a fixation target that was embedded in the device. The fixation targets were readily observable to the participants without accommodation, thanks to the aberrometer’s Badal system. When each eye was staring at the target, its wavefront aberration was recorded three times and then averaged for further analysis. The averaged Zernike coefficients were rescaled to the smallest value of the maximum round pupil found among all eyes (4.41 mm), and this procedure was repeated for each target., [Results]: Alteration of the fixation targets caused changes to the Zernike coefficients of defocus (C(2,0)), vertical trefoil (C(3,–3)), vertical coma (C(3,–1)), horizontal coma (C(3,1)), oblique trefoil (C(3,3)), primary spherical aberration (C(4,0)), and secondary spherical aberration (C(6,0)), but the changes were not statistically significant. Nevertheless, an alteration in the target’s size and shape exhibited a significant correlation across all of the aforementioned coefficients in both eyes (p < 0.05). The total RMS of aberrations and the RMS of the spherical-like aberrations were both lowest while choosing the larger Maltese cross, and the bigger E-letter minimized the RMS of HOA and comatic aberrations., [Conclusion]: The aberrometric changes occur as a consequence of altering the fixational gaze and are within the range of the changes found after performing a near-vision task, so they might potentially act as a confounding factor when attempting to identify such small variations in the ocular wavefront. Using a smaller E-letter (5 arcmin) as an internal fixation target resulted in the least standard deviation of measurements, fixational stability, and higher accuracy in ocular wavefront measurements., This research has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 956720., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fast and slow response of the accommodation system in young and incipient-presbyope adults during sustained reading task

  • Safarian Baloujeh, Ebrahim
  • Queirós, António
  • Navarro, Rafael
  • González-Méijome, José M.
The data presented in this study are available upon request from the corresponding author., This article belongs to the Special Issue Presbyopia, Laser, Cataract and Refractive Surgery: State-of-the-Art Research., [Objectives]: To investigate the dynamics of accommodation during and immediately after a sustained reading task on a digital device across various age groups under monocular and binocular conditions., [Methods]: Seventeen subjects were selected and divided into three age groups: young adults (n = 4, age: 21.3 ± 3.2 years), adults (n = 4, age: 34 ± 3.56 years), and incipient presbyopes (n = 9, age: 45 ± 3.61 years). Dynamic accommodation and disaccommodation were objectively measured using the WAM-5500 open-view autorefractor during 2 min of distance fixation (Maltese cross at 6 m), 5 min of sustained near reading on a teleprompter app at the nearest readable distance, and 2 min of distance vision. Six sequential temporal landmarks were identified. Quantitative metrics for accommodation lag (AL), slope of slow accommodation (SSA), slope of slow disaccommodation (SSD), peak velocity of accommodation (PVA) and peak velocity of disaccommodation (PVD) were obtained as absolute values of spherical equivalent refractive (SER) change., [Results]: SSA, SSD, and AL were significantly and positively correlated with age (ρ = 0.75, 0.73, 0.51, respectively; p ≤ 0.038). For subjects under 45 years of age SSA and SSD increased quadratically with age, while for those above 45 years, both SSA and SSD decreased linearly. Linear regression of PVA and PVD with age indicated that the disaccommodation mechanism is faster than accommodation (slope = -0.15 and -0.23, respectively). PVA was significantly faster under monocular than binocular conditions (p = 0.124)., [Conclusions]: Incipient presbyopes demonstrate a complex response in both accommodation and disaccommodation. The accommodation system responds quickly, but there is also a slower response that can provide up to an additional 1D of accommodative response during sustained near reading tasks. It is hypothesized that the crystalline lens exhibits hysteresis in returning to its unaccommodated state, due to its viscoelastic properties, which means it takes time to relax., This project received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 956720. This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding UIDB/04650/2020., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Intracapsular accommodation mechanism in terms of lens curvature gradient

  • Lockett-Ruiz, Veronica
  • Navarro, Rafael
  • López-Gil, Norberto
The intracapsular accommodation mechanism (IAM) may be understood as an increase in the lens equivalent refractive index as the eye accommodates. Our goal was to evaluate the existence of an IAM by analysing observed changes in the inner curvature gradient of the lens. To this end, we fitted a gradient index and curvature lens model to published experimental data on external and nucleus geometry changes during accommodation. For each case analysed, we computed the refractive power and equivalent index for each accommodative state using a ray transfer matrix. All data sets showed an increase in the effective refractive index, indicating a positive IAM, which was stronger for older lenses. These results suggest a strong dependence of the lens equivalent refractive index on the inner curvature gradient., Funded by the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 956720 and by the Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación y Universidades of Spain (MICIN), grant number PID2019-107058RB-I00/AEI/10.13039/501100011033CONFLICTSOFINTEREST., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of gradient-index lenses on the optical performance of SyntEyes

  • Lockett-Ruiz, Veronica
  • Navarro, Rafael
  • Rozema, Jos J.
This study analyzes the effect of two different gradient index (GRIN) crystalline lens models on ocular optical performance compared to that of a homogeneous lens. Using the biometric data of 200 SyntEyes (synthetically generated eyes), we implemented three lens models: homogeneous, GRIN, and GRINCU (gradient index and gradient curvature of the isoindicial surfaces). Using the three lens models, we conducted finite ray tracing on the SyntEyes samples, incorporating five different curvature gradients into the GRINCU setup. We calculated the average cardinal points and Zernike aberration coefficients for each SyntEyes sample, along with the cardinal points for each lens model. GRINCU lens configurations with increased IIS curvature toward the center result in an average forward shift of the lens principal planes, leading to increased ocular power relative to the homogeneous lens model. Steeper curvature gradients of the IIS towards the lens center result in reduced astigmatism, defocus, lateral coma, and primary spherical aberration. The interplay between the lens’s gradient index and IIS curvature gradient alters the optical properties of the eye as a whole, highlighting the crucial role of the lens’s internal properties in optical performance., This research was funded by the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No 956720., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the role of biconic surfaces in modelling astigmatic eyes

  • Blanco-Martínez, Iñaki
  • Navarro, Rafael
  • Faria-Ribeiro, Miguel
Data underlying the results presented in this paper are not available at this time but may be obtained from the authors upon request., This study provides a detailed description of biconic surfaces, focusing on their critical properties and utility in modelling astigmatic eyes. It examines general aspects, including implicit or explicit equations, azimuthal variations as well as average values of their geometrical parameters, and matrix-vector formulation. Additionally, the study explores the properties of these surfaces under conditions where the principal curvatures are closely matched, reflecting the typical characteristics of astigmatic eyes. The derived expressions closely align with theoretical predictions, and these conditions are successfully tested on 56 healthy corneas. This work expands current knowledge about biconic surfaces and offers a deeper understanding of the optical features of astigmatic eyes., H2020 Marie Skłodowska-Curie Actions (956720)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling the aging crystalline lens: a quantitative explanation of the lens paradox

  • Lockett-Ruiz, Veronica
  • Navarro, Rafael
The lens paradox refers to the phenomenon where the human lens loses refractive power, despite the increase in external curvature and thickness associated with aging. In this study, we develop an age-dependent GRINCU (gradient index and gradient curvature of the iso-indicial surfaces) lens model and propose a quantitative explanation for the lens paradox. Drawing on various sources in the literature, we configured a lens with an age-dependent geometry and implemented this model for an age range of 23-73 years. By adjusting the internal curvature gradient for each age, we optimized the lens refractive power to match experimental measurements within this age range. To compare the results obtained by varying the curvature gradient of the iso-indicial surfaces (IISs), we also modeled a concentric configuration for each age. Among the two configurations, only the model with a variable curvature gradient successfully replicated the decline in refractive power associated with aging, whereas the concentric configuration showed an increasing trend in power with age. To accurately explain the lens paradox, it is crucial to consider not only the changes in refractive index with aging but also the changes in the internal curvature gradient of the lens., H2020: 956720; European Commission: Opto-Biomechanical Eye Research Network/OBERON., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Zulu ocular biometry differs fundamentally from that of Europeans – A modelling analysis

  • Lockett-Ruiz, Veronica
  • Evans, Tanya
  • Navarro, Rafael
  • Mashige, Khathutshelo Percy
  • Rozema, Jos J.
[Purpose]: The accuracy of ocular refraction calculations depends on reliable biometry and the validity of the models upon which the calculations are based. Most models are based on European eyes, so their validity in sub-Saharan Africans may be questioned, potentially contributing to suboptimal postoperative outcomes. Hence, this study developed an optical eye model tailored to a Zulu cohort., [Methods]: Ocular biometry data were collected from 192 near-emmetropic (i.e., non-cycloplegic spherical equivalent within ±1D) young individuals of Zulu descent in Durban, South Africa. Key biometric parameters, including axial length, corneal thickness, anterior chamber depth, crystalline lens thickness and vitreous chamber depth, were measured and input into Bennett's and Royston's equations to develop the eye model. This model was subsequently compared to the eyes of 32 near-emmetropic young European adults that were used previously to help develop the SyntEyes model. Statistical analysis was performed to identify significant differences in ocular structural parameters between the models., [Results]: Zulu eyes exhibited marked differences compared to European eyes. On average, Zulu eyes had deeper anterior chambers (+0.28 mm, t-test, p < 0.001), thinner crystalline lenses (-0.19 mm, p < 0.001) and lower corneal power (-0.83 D, p = 0.001). However, the total ocular power of Zulu eyes was greater due to a more powerful crystalline lens (+2.60 D, p < 0.001). No significant difference in refractive error or axial length was observed between the two populations., [Conclusions]: The ocular biometry of the Zulu population differs significantly from that of the European population, particularly in corneal and crystalline lens power, lens thickness and anterior chamber depth. This has important implications for intraocular lens power calculations, glaucoma risk assessment and other diagnostic procedures. Accurate, population-specific references are essential for optimising vision correction and enhancing ophthalmic healthcare outcomes in regions with populations underrepresented in the literature., Open Access funding enabled and organized by Projekt DEAL., This research was partially funded by the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 956720.26. TE received the University Capacity Development Grant (UCDG) for this collaboration from the Department of Higher Education and Training (DHET, South Africa) in 2023. KPM received the South African Medical Research Council (SAMRC) National Health Scholarship in 2016., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A detailed methodology to model the Non Contact Tonometry: a Fluid Structure Interaction study

  • Redaelli, Elena
  • Grasa, Jorge
  • Calvo, Begoña
  • Rodriguez Matas, Jose Felix
  • Luraghi, Giulia
Understanding the corneal mechanical properties has great importance in the study of corneal pathologies and the prediction of refractive surgery outcomes. Non-Contact Tonometry (NCT) is a non-invasive diagnostic tool intended to characterize the corneal tissue response in vivo by applying a defined air-pulse. The biomarkers inferred from this test can only be considered as indicators of the global biomechanical behaviour rather than the intrinsic biomechanical properties of the corneal tissue. A possibility to isolate the mechanical response of the corneal tissue is the use of an inverse finite element method, which is based on accurate and reliable modelling. Since a detailed methodology is still missing in the literature, this paper aims to construct a high-fidelity finite-element model of an idealized 3D eye for in silico NCT. A fluid-structure interaction (FSI) simulation is developed to virtually apply a defined air-pulse to a 3D idealized eye model comprising cornea, limbus, sclera, lens and humors. Then, a sensitivity analysis is performed to examine the influence of the intraocular pressure (IOP) and the structural material parameters on three biomarkers associated with corneal deformation. The analysis reveals the requirements for the in silico study linked to the correct reproduction of three main aspects: the air pressure over the cornea, the biomechanical properties of the tissues, and the IOP. The adoption of an FSI simulation is crucial to capture the correct air pressure profile over the cornea as a consequence of the air-jet. Regarding the parts of the eye, an anisotropic material should be used for the cornea. An important component is the sclera: the stiffer the sclera, the lower the corneal deformation due to the air-puff. Finally, the fluid-like behavior of the humors should be considered in order to account for the correct variation of the IOP during the test which will, otherwise, remain constant. The development of a strong FSI tool amenable to model coupled structures and fluids provides the basis to find the biomechanical properties of the corneal tissue in vivo.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Analytical ray transfer matrix for the crystalline lens

  • Navarro, Rafael
  • Lockett-Ruiz, Veronica
  • López, José L.
We present the formulation of a paraxial ray transfer or ABCD matrix for onion-type GRIN lenses. In GRIN lenses, each iso-indicial surface (IIS) can be considered a refracting optical surface. If each IIS is a shell or layer, the ABCD matrix of a GRIN lens is computed by multiplying a typically high number of translation and refraction matrices corresponding to the K layers inside the lens. Using a differential approximation for the layer thickness, this matrix product becomes a sum. The elements A, B, C, and D of the approximated GRIN ray transfer matrix can be calculated by integrating the elements of a single-layer matrix. This ABCD matrix differs from a homogeneous lens matrix in only one integration term in element C, corresponding to the GRIN contribution to the lens power. Thus the total GRIN lens power is the sum of the homogeneous lens power and the GRIN contribution, which offers a compact and simple expression for the ABDC matrix. We then apply this formulation to the crystalline lens and implement both numerical and analytical integration procedures to obtain the GRIN lens power. The analytical approximation provides an accurate solution in terms of Gaussian hypergeometric functions. Last, we compare our numerical and analytical procedures with published ABCD matrix methods in the literature, and analyze the effect of the iso-indicial surface’s conic constant (Q) and inner curvature gradient (G) on the lens power for different lens models.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Lighting-Induced Changes in Central and Peripheral Retinal Thickness and Shape after Short-Term Reading Tasks in Electronic Devices

  • Orduna-Hospital, Elvira
  • Ávila, Francisco J.
  • Fernández-Espinosa, Guisela
  • Sanchez-Cano, Ana
Background: To assess retinal and optical changes associated with near vision reading for different lighting conditions in electronic screens. Methods: Twenty-four young healthy subjects participated in the study; an iPad and an Ebook were chosen as stimuli for 5 min of reading task with different lighting conditions. Central and peripheral retinal thicknesses in the macular ETDRS areas by optical coherence tomography were analyzed. Results: Significant differences were found between basal retinal thickness and retinal thickness after reading with iPad and high illumination, in the N6 (p = 0.021) and I6 (p = 0.049) areas, and low illumination (S3: p = 0.008, N3: p = 0.018, I3: p = 0.021, N6: p = 0.018 and I6: p = 0.020), being thinner after reading. The same trend was observed after reading with an Ebook and high lighting in the N3 (p = 0.037) and N6 (p = 0.028). For low lighting conditions, only retinal thinning was observed. After reading, retinal shape analysis revealed significant changes from computed basal eccentricity for high lighting conditions only. At the periphery, those differences in eccentricity values were statistically significant for both lighting conditions. Conclusions: Young people can recover visual quality after 5 min of reading tasks at different lighting levels on electronic devices, while peripheral retinal expansion remains altered, especially at low lighting levels.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Method to calculate melanopic light reaching the retina depending on the optical density of an aging crystalline lens

  • Sanchez-Cano, A.
  • Orduna-Hospital, E.
  • Fernández-Espinosa, G.
  • Aporta, J.
Lighting studies that take into account the age of the inhabitants of an area and are related to circadian light are difficult to find. This study aims to simplify a method to approximately compute the circadian light reaching the retina based on photopic illuminance reaching the corneal plane and considering the optical density of an aging crystalline lens. As an example of this proposed method, calculations were performed with both the D65 and A standard illuminants, showing how the spectral power distribution is modified by the optical density of the crystalline lens, mainly at short wavelengths. Due to these selective wavelength absorptions of the aged lens, a significant variation in the level of daylight equivalent melanopic illuminance (EDI) is present in the retina. With levels of 200 lux at the corneal plane, these variations ranged from 204 EDI lux to 178 EDI lux for the D65 standard illuminant, and from 99 EDI lux to 101 EDI lux for the A standard illuminant for observers aged 10 and 90, respectively. In this work, we aimed to simplify the greatest possible level of calculation of melanopic light, while describing simple protocols that are easy to translate into practice. Our results will allow researchers to carry out optimized lighting designs from both the photometric and circadian perspectives considering the optical density of an aging lens.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optical and motor changes associated with lighting and near vision tasks in electronic devices

  • Orduna-Hospital, Elvira
  • Safarian Baloujeh, Ebrahim
  • Navarro, Rafael
  • Sanchez-Cano, Ana
Purpose:To assess optical and motor changes associated with near vision reading under different controlled lighting conditions performed with two different types of electronic screens. Methods: Twenty-four healthy subjects with a mean age of 22.9±2.3 years (18-33) participated in this study. An iPad and an e-ink reader were chosen to present calibrated text, and each task lasted 5 minutes evaluating both ambient illuminance level and luminance of the screens. Results:Eye-tracker data revealed a higher number of saccadic eye movements under minimum luminance than under maximum luminance. The results showed statistically significant differences between the iPad (p=0.016) and the e-ink reader (p=0.002). The length of saccades was also higher for the minimum luminance level for both devices: 6.2±2.8 mm and 8.2±4.2 mm (e-ink max vs min), 6.8±2.9 mm and 7.6±3.6 mm (iPad max vs min), and blinking rate increased significantly for lower lighting conditions. Conclusions: Performing reading tasks on electronic devices is highly influenced by both the configuration of the screens and the ambient lighting, meanwhile, low differences in visual quality that are transient in healthy young people, were found.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Viscoelastic properties of porcine lenses using optical coherence elastography and inverse finite element analysis

  • Cabeza-Gil, Iulen
  • Tahsini, Vahoura
  • Kling, Sabine
The mechanical properties of the crystalline lens are crucial in determining the changes in lens shape that occur during the accommodation process and are also a major factor in the development of the two most prevalent age-related diseases of the lens, presbyopia and cataracts. However, a comprehensive understanding of these properties is currently lacking. Previous methods for characterizing the mechanical properties of the lens have been limited by the amount of data that could be collected during each test and the lack of complex material modeling. These limitations were mainly caused by the lack of imaging techniques that can provide data for the entire crystalline lens and the need for more complex models to describe the non-linear behavior of the lens. To address these issues, we characterized the mechanical properties of 13 porcine lenses during an ex vivo micro-controlled-displacement compression experiment using optical coherence elastography (OCE) and inverse finite element analysis (iFEA). OCE allowed us to quantify the internal strain distribution of the lens and differentiate between the different parts of the lens, while iFEA enabled us to implement an advanced material model to characterize the viscoelasticity of the lens nucleus and the relative stiffness gradient in the lens. Our findings revealed a pronounced and rapid viscoelastic behavior in the lens nucleus (g1 = 0.39 ± 0.13, τ1 = 5.01 ± 2.31 s) and identified the lens nucleus as the stiffest region, with a stiffness 4.42 ± 1.20 times greater than the anterior cortex and 3.47 ± 0.82 times greater than the posterior cortex. However, due to the complex nature of lens properties, it may be necessary to employ multiple tests simultaneously for a more comprehensive understanding of the crystalline lens.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Visual Quality, Motility Behavior, and Retinal Changes Associated with Reading Tasks Performed on Electronic Devices

  • Orduna-Hospital, Elvira
  • Munarriz-Escribano, María
  • Sanchez-Cano, Ana
Background: The purpose of this study was to objectively evaluate visual discomfort using an eye tracker and aberrometer after a 21-min reading session on an iPad and an Ebook. Additionally, retinal changes were analyzed using optical coherence tomography (OCT). Methods: A total of 31 young subjects (24 ± 4 years) participated in this study. They read for 21 min on an Ebook and for another 21 min on an iPad under controlled lighting conditions while their eye movements were monitored using an eye tracker. Aberrometry and retinal OCT measurements were taken before and after each reading session. Parameters such as pupil diameter, fixations, saccades, blinks, total aberration, high-order aberration, low-order aberration, and central and peripheral retinal thickness in the nine early treatment diabetic retinopathy study (ETDRS) areas were measured for each reading situation. Statistical analysis was performed on the collected data. Results: No statistically significant differences (p > 0.05) between the two devices were observed in terms of the different types of eye movements or the changes in retinal thickness. However, the aberrometric analysis showed variations in post-reading situations depending on the device used. Conclusion: Reading speed and visual discomfort resulting from electronic device usage can be objectively assessed using an eye tracker and aberrometer. Additionally, changes found in central and peripheral retinal thickness between the two devices and the baseline measurements were not significant and remained relatively stable.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Evaluation of the mechanical stability of intraocular lenses using digital image correlation

  • Cabeza-Gil, I.
  • Frechilla, J.
  • Calvo, B.
This study aimed to evaluate the mechanical stability of seven different intraocular lens (IOL) haptic designs by using digital image correlation to measure their mechanical biomarkers (axial displacement, tilt, and rotation) under quasi-static compression. The IOLs were compressed between two clamps from 11.00 up to 9.50 mm whilst a 3D deformation dataset was acquired every 0.04 mm. Results revealed that flexible and mixed IOL designs exhibited better mechanical response for smaller compression diameters compared to stiff designs. Conversely, stiff designs performed better for larger compression diameters. These findings may aid in the selection and development of more mechanically stable IOL designs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Adaptive Illuminance Effects on Retinal Morphology and Refraction: A Comprehensive Study of Night Myopia

  • Orduna-Hospital, Elvira
  • Crespo-Castan, Cynthia
  • Ávila, Francisco J.
  • Sanchez-Cano, Ana
Background: We aimed to study the optical and retinal modifications that occur after adapting to different lighting conditions including photopic, mesopic, scotopic, blue light and red light conditions. Methods: Thirty young healthy subjects with a mean age of 23.57 ± 3.45 years were involved in the study (both eyes included). They underwent aberrometry and optical coherence tomography at both the central and peripheral retina with the 3 × 3 mm2 macular cube protocol before starting adaptation to the illuminations (baseline) and after remaining for 5 min under the five different lighting conditions inside a controlled lighting cabinet. Results: Significant myopization (p = 0.002) was observed under scotopic and mesopic lighting conditions, while hypermetropization occurred under the influence of blue LED light. In the central retina, a significant thickening of the inner temporal (p = 0.025) and outer inferior (p = 0.021) areas was observed in the scotopic area, and the thickening increased even more under blue and red light. The mean central thickness decreased significantly under photopic lighting conditions (p = 0.038). There was an increase in the mean volume of the central retinal area with red light and a reduction in the volume under photopic lighting (p = 0.039). In the peripheral retina, no significant thickness changes were observed after adapting to any of the lighting conditions (p > 0.05). Regarding morphological changes, a significant increase in retinal eccentricity (p = 0.045) and the shape factor (p = 0.036) was found. In addition, a significant correlation was found only between the eccentricity and volume of the central retina in scotopic conditions (r = −0.265; p = 0.041), meaning that a higher volume was associated with lower retinal eccentricity. Conclusions: When exposed to different lighting conditions, the retina changes in shape, and ocular refraction is modified to adapt to each condition, revealing the phenomenon of night myopia when transitioning from photopic to scotopic regimes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Intracapsular accommodation mechanism in terms of lens curvature gradient

  • Lockett-Ruiz, Veronica
  • Navarro, Rafael
  • López-Gil, Norberto
The intracapsular accommodation mechanism (IAM) may be understood as an increase in the lens equivalent refractive index as the eye accommodates. Our goal was to evaluate the existence of an IAM by analysing observed changes in the inner curvature gradient of the lens. To this end, we fitted a gradient index and curvature lens model to published experimental data on external and nucleus geometry changes during accommodation. For each case analysed, we computed the refractive power and equivalent index for each accommodative state using a ray transfer matrix. All data sets showed an increase in the effective refractive index, indicating a positive IAM, which was stronger for older lenses. These results suggest a strong dependence of the lens equivalent refractive index on the inner curvature gradient.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Improving early detection of keratoconus by Non Contact Tonometry. A computational study and new biomarkers proposal

  • Redaelli, Elena
  • Nana, Michael
  • Calvo, Begoña
  • Rodríguez Matas, José Félix
  • Luraghi, Giulia
  • Rozema, Jos
  • Grasa, Jorge
Keratoconus is a progressive ocular disorder affecting the corneal tissue, leading to irregular astigmatism and decreased visual acuity. The architectural organization of corneal tissue is altered in keratoconus, however, data from ex vivo testing of biomechanical properties of keratoconic corneas are limited and it is unclear how their results relate to true mechanical properties in vivo. This study explores the mechanical properties of keratoconic corneas through numerical simulations of non-contact tonometry (NCT) reproducing the clinical test of the Corvis ST device. Three sensitivity analyses were conducted to assess the impact of corneal material properties, size, and location of the pathological area on NCT results. Additionally, novel asymmetry-based indices were proposed to better characterize corneal deformations and improve the diagnosis of keratoconus. Our results show that the weakening of corneal material properties leads to increased deformation amplitude and altered biomechanical response. Furthermore, asymmetry indices offer valuable information for locating the pathological tissue. These findings suggest that adjusting the Corvis ST operation, such as a camera rotation, could enhance keratoconus detection and provide insights into the relative position of the affected area. Future research could explore the application of these indices in detecting early-stage keratoconus and assessing the fellow eye's risk for developing the pathology
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The Effect of Lens Shape, Zonular Insertion and Finite Element Model on Simulated Shape Change of the Eye Lens

  • Ye, Lin
  • Wang, Kehao
  • Grasa, Jorge
  • Pierscionek, Barbara K.
The process of lens shape change in the eye to alter focussing (accommodation) is still not fully understood. Modelling approaches have been used to complement experimental findings in order to determine how constituents in the accommodative process influence the shape change of the lens. An unexplored factor in modelling is the role of the modelling software on the results of simulated shape change. Finite element models were constructed in both Abaqus and Ansys software using biological parameters from measurements of shape and refractive index of two 35-year-old lenses. The effect of zonular insertion on simulated shape change was tested on both 35-year-old lens models and with both types of software. Comparative analysis of shape change, optical power, and stress distributions showed that lens shape and zonular insertion positions affect the results of simulated shape change and that Abaqus and Ansys show differences in their respective models. The effect of the software package used needs to be taken into account when constructing finite element models and deriving conclusions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The influence of variations in ocular biometric and optical parameters on differences in refractive error

  • Farzanfar, Arezoo
  • Lockett-Ruiz, Veronica
  • Navarro, Rafael
  • Koppen, Carina
  • Rozema, Jos J.
Purpose To present a paraxial method to estimate the influence of variations in ocular biometry on changes in refractive error (S) at a population level and apply this method to literature data. Methods Error propagation was applied to two methods of eye modelling, referred to as the simple method and the matrix method. The simple method defines S as the difference between the axial power and the whole-eye power, while the matrix method uses more accurate ray transfer matrices. These methods were applied to literature data, containing the mean ocular biometry data from the SyntEyes model, as well as populations of premature infants with or without retinopathy, full-term infants, school children and healthy and diabetic adults. Results Applying these equations to 1000 SyntEyes showed that changes in axial length provided the most important contribution to the variations in refractive error (57%–64%), followed by lens power/gradient index power (16%–31%) and the anterior corneal radius of curvature (10%–13%). All other components of the eye contributed <4%. For young children, the largest contributions were made by variations in axial length, lens and corneal power for the simple method (67%, 23% and 8%, respectively) and by variations in axial length, gradient lens power and anterior corneal curvature for the matrix method (55%, 21% and 14%, respectively). During myopisation, the influence of variations in axial length increased from 54.5% to 73.4%, while changes in corneal power decreased from 9.82% to 6.32%. Similarly, for the other data sets, the largest contribution was related to axial length. Conclusions This analysis confirms that the changes in ocular refraction were mostly associated with variations in axial length, lens and corneal power. The relative contributions of the latter two varied, depending on the particular population.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Investigation of crystalline lens overshooting: ex vivo experiment and optomechanical simulation results

  • Dahaghin, Ali
  • Salimibani, Milad
  • Boszczyk, Agnieszka
  • Józwik, Agnieszka
  • Skrok, Marta
  • Grasa, Jorge
  • Siedlecki, Damian
Introduction: Crystalline lens overshooting refers to a situation in which the lens momentarily shifts too much from its typical location immediately after stopping the rotational movement of the eye globe. This movement can be observed using an optical technique called Purkinje imaging.Methods: In this work, an experimental setup was designed to reproduce this effect ex vivo using a fresh porcine eye. The sample was rotated 90° around its centroid using a high-velocity rotation stage, and the Purkinje image sequences were recorded, allowing us to quantify the overshooting effect. The numerical part of the study consisted of developing a computational model of the eye, based on the finite element method, that allowed us to understand the biomechanical behavior of the different tissues in this dynamic scenario. A 2D fluid–structure interaction model of the porcine eye globe, considering both the solid parts and humors, was created to reproduce the experimental outcomes.Results: Outputs of the simulation were analyzed using an optical simulation software package to assess whether the mechanical model behaves optically like the real ex vivo eye. The simulation predicted the experimental results by carefully adjusting the mechanical properties of the zonular fibers and the damping factor.Conclusion: This study effectively demonstrates the importance of characterizing the dynamic mechanical properties of the eye tissues to properly comprehend and predict the overshooting effect.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Establishing standardization guidelines for finite-element optomechanical simulations of refractive laser surgeries: An application to photorefractive keratectomy

  • Fantaci, Benedetta
  • Calvo, Begoña
  • Barraquer, Rafael
  • Picó, Andrés
  • Ariza-Gracia, Miguel Ángel
Purpose: Computational models can help clinicians plan surgeries by accounting for factors such as mechanical imbalances or testing different surgical techniques beforehand. Different levels of modeling complexity are found in the literature, and it is still not clear what aspects should be included to obtain accurate results in finite-element (FE) corneal models. This work presents a methodology to narrow down minimal requirements of modeling features to report clinical data for a refractive intervention such as PRK. Methods: A pipeline to create FE models of a refractive surgery is presented: It tests different geometries, boundary conditions, loading, and mesh size on the optomechanical simulation output. The mechanical model for the corneal tissue accounts for the collagen fiber distribution in human corneas. Both mechanical and optical outcome are analyzed for the different models. Finally, the methodology is applied to five patient-specific models to ensure accuracy. Results: To simulate the postsurgical corneal optomechanics, our results suggest that the most precise outcome is obtained with patient-specific models with a 100 µm mesh size, sliding boundary condition at the limbus, and intraocular pressure enforced as a distributed load. Conclusions: A methodology for laser surgery simulation has been developed that is able to reproduce the optical target of the laser intervention while also analyzing the mechanical outcome. Translational Relevance: The lack of standardization in modeling refractive interventions leads to different simulation strategies, making difficult to compare them against other publications. This work establishes the standardization guidelines to be followed when performing optomechanical simulations of refractive interventions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Wavefront Changes during a Sustained Reading Task in Presbyopic Eyes

  • Safarian Baloujeh, Ebrahim
  • González-Méijome, José M.
The objective of this study was to assess the effect of sustained reading on the temporal changes in the wavefront error in the presbyopic eye. The wavefront aberration of the eyes was measured using an IRX3 Shack–Hartmann aberrometer before and after (immediately, 5 min, and 10 min after) a reading task. Temporal changes in C20, C40, and C3−1 coefficient values of the eyes were plotted, showing a predominant number of V-shaped patterns (for C40 and C3−1) and inverse V-shaped patterns (for C20) among the study group, and the percentages (between 27 and 73%) were reported. The median of the total RMS of aberrations and the RMS of HOA (higher-order aberrations), which included comatic (3rd order) and spherical-like aberrations (4th and 6th order), increased immediately after finishing the near-vision reading task and then decreased. The median of RMS of comatic aberrations had a similar pattern of variations, while the median of RMS of spherical-like aberrations displayed an opposite pattern. Simulating the aberration changes due to lens decentration caused by relaxed zonules during 4 D accommodation in an eye model demonstrated that the expected range of changes for the vertical coma and spherical aberrations are in the order of 0.001 and 0.01 μm, respectively, which could justify why the observed changes were not statistically significant. The observed dynamic changes in HOA might be linked to the biomechanical characteristics and alterations in the displacement of the crystalline lens following prolonged near-vision tasks in presbyopic people. Although some predominant patterns under some conditions were shown, they exhibit considerable inter-subject and inter-ocular variability. This might be due to slight misalignments while fixating on the internal extended object in the aberrometer.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Modeling biological growth of human keratoconus: On the effect of tissue degradation, location and size

  • Fantaci, Benedetta
  • Calvo, Begoña
  • Rodríguez, José Félix
Keratoconus is a non-inflammatory bilateral disease, that usually occurs in the inferior-temporal region, where the cornea bulges out and becomes thinner, due to the gradual loss of structural organization in corneal tissue. Degenerated extracellular matrix and fibers breakage have been observed in keratoconic corneas, that may promote the progression of the pathology. While keratoconus histopathology has been widely described in literature, its etiology is still not clear. Being able to fully understand keratoconus growing process could be crucial to detect its development and improve prevention strategies. This work proposes a novel continuum-based keratoconus growth model. The proposed framework accounts for the structural changes occurring in the underlying tissue during the progression of the disease, as indicated in experiments. The developed formulation is able to replicate the typical bulging and thinning of keratoconic corneas, as well as different forms in terms of shape, as they are commonly classified in clinics (nipple, oval and globus cones). The cone that is obtained constitutes a permanent deformed state, not pressure dependent. The resulting model may help to better understand the etiology of the behavior of this disease with the aim of improving the diagnosis and the treatment of the pathology.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Non-contact tonometry: predicting intraocular pressure using a material—corneal thickness—independent methodology

  • Redaelli, Elena
  • Calvo, Begoña
  • Rodriguez Matas, Jose Felix
  • Luraghi, Giulia
  • Grasa, Jorge
Introduction: Glaucoma, a leading cause of blindness worldwide, is primarily caused by elevated intraocular pressure (IOP). Accurate and reliable IOP measurements are the key to diagnose the pathology in time and to provide for effective treatment strategies. The currently available methods for measuring IOP include contact and non contact tonometers (NCT), which estimate IOP based on the corneal deformation caused by an external load, that in the case of NCT is an air pulse. The deformation of the cornea during the tonometry is the result of the coupling between the IOP, the mechanical properties of the corneal tissue, the corneal thickness, and the external force applied. Therefore, there is the need to decouple the four contributions to estimate the IOP more reliably.Methods: This paper aims to propose a new methodology to estimate the IOP based on the analysis of the mechanical work performed by the air jet and by the IOP during the NCT test. A numerical eye model is presented, initially deformed by the action of a falling mass to study the energy balance. Subsequently, Fluid-Structure Interaction (FSI) simulations are conducted to simulate the action of Corvis ST.Results and discussion: The new IOP estimation procedure is proposed based on the results of the simulations. The methodology is centred on the analysis of the time of maximum apex velocity rather than the point of first applanation leading to a new IOP estimation not influenced by the geometrical and mechanical corneal factors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The influence of accommodative demand on ocular aberrations: a study of Zernike coefficients repeatability and variability

  • Mechó-García, María
  • Arcas-Carbonell, María
  • Orduna-Hospital, Elvira
  • Sánchez-Cano, Ana
  • González-Méijome, José Manuel
Purpose To evaluate the repeatability of the Zernike coefficients in healthy eyes when monocular accommodation was stimulated at different vergences demands. Methods A total of 36 right eyes from healthy volunteers were prospectively and consecutively recruited for this study. Wavefront aberrometry was conducted to objectively characterize the ocular optical quality during accommodation, from the individual’s far point to a 5 D accommodation demand in steps of 0.5 D. The repeatability of Zernike coefficients up to the fourth order was assessed by calculating the within-eye repeatability (Sw), the coefficient of repeatability (CR), the coefficient of variation (CV), and the intraclass correlation coefficient (ICC) as an indicator of measurement reliability. Results Correlation among repeated measurements showed high reliability (ICC > 0.513) for all parameters measured except some fourth-order Zernike coefficients, C(4, −4) (ICC < 0.766), C(4, −2) (ICC < 0.875), C(4, 2) (ICC < 0.778) and C(4, 4) (ICC < 0.811). Greater repeatability and less variability were obtained for high-order Zernike coefficients (CR < 0.154), although an increase in CR in the coefficients analyzed was observed with increasing accommodative demand. No clear trend was evident in CV; however, it was observed that the low-order Zernike coefficients exhibit lower CV (CV < 1.93) compared to the high-order Zernike coefficients (CV > 0). Conclusions The reliability of Zernike coefficients up to the fourth order in healthy young individuals demonstrated a strong consistency in measuring terms up to the fourth order, with more variability observed for high-order terms. The Zernike coefficients up to the third order exhibited the highest level of repeatability.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Storage-induced mechanical changes of porcine lenses assessed with optical coherence elastography and inverse finite element modeling

  • Tahsini, Vahoura
  • Cabeza Gil, Iulen
  • Kling, Sabine
Introduction: In an effort of gaining a better understanding of the lens mechanics, ex vivo lenses samples are often used. Yet, ex vivo tissue might undergo important postmortem changes depending on the unavoidable preservation method employed. The purpose of this study was to assess how various storage conditions and the removal of the lens capsule affect the mechanical properties of ex vivo porcine lens samples. Methods: A total of 81 freshly enucleated porcine eyes were obtained and divided into six groups and preserved differently. In the first three groups, the lens within the intact eye was preserved for 24 h by: (i) freezing at −80°C (n = 12), (ii) freezing at −20°C (n = 12), and (iii) refrigeration at +8°C (n = 12). In the remaining groups, the lenses were immediately extracted and treated as follows: (iv) kept intact, no storage (n = 12), (v) decapsulated, no storage (n = 21), and (vi) immersed in Minimum Essential Medium (MEM) at +8°C (n = 12) for 24 h. Frozen lenses were thawed at room temperature. Each lens was compressed between two glass lamella and subjected, first to a period of relaxation during which the compression force was recorded and second to an oscillating micro-compression while the deformation was recorded with a total of 256 subsequent B-scans via optical coherence tomography. The corresponding axial strain was retrieved via phase-sensitive image processing and subsequently used as input for an inverse finite element analysis (iFEA) to retrieve the visco-hyperelastic material properties of the lenses. Results: After freezing at temperatures of −80°C and −20°C, the cortical strains increased by 14% (p = 0.01) and 34% (p < 0.001), and the nuclear strains decreased by 17% (p = 0.014) and 36% (p < 0.001), compared to the lenses tested immediately after postmortem, respectively. According to iFEA, this resulted from an increased ratio of the nuclear: cortical E-modulus (4.06 and 7.06) in −80°C and −20°C frozen lenses compared to fresh lenses (3.3). Decapsulation had the largest effect on the material constant C10, showing an increase both in the nucleus and cortex. Preservation of the intact eye in the refrigerator induced the least mechanical alterations in the lens, compared to the intact fresh condition. Discussion: Combining iFEA with optical coherence elastography allowed us to identify important changes in the lens mechanics induced after different preserving ex vivo methods.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Statistical model of ocular wavefronts with accommodation

  • Mechó-García, María
  • Arcas-Carbonell, María
  • Orduna-Hospital, Elvira
  • Sánchez-Cano, Ana
  • López-Gil, Norberto
  • Macedo-de-Araújo, Rute J.
  • Faria-Ribeiro, Miguel
  • Fernandes, Paulo
  • González-Méijome, José Manuel
  • Rozema, Jos
Purpose: The purpose of this study was to determine the minimum number of orthonormal basis functions, applying Principal Component Analysis (PCA), to represent the most wavefront aberrations at different accommodation stages. The study also aims to generate synthetic wavefront data using these functions. Methods: Monocular wavefront data from 191 subjects (26.15 ± 5.56 years old) were measured with a Hartmann-Shack aberrometer, simulating accommodation from 0 diopters (D) to 5 D in 1 D steps. The wavefronts for each accommodative demand were rescaled for different pupil sizes: 4.66, 4.76, 4.40, 4.09, 4.07, and 3.68 mm. PCA was applied to 150 wavefront parameters (25 Zernike coefficients × 6 accommodation levels) to obtain eigenvectors for dimensional reduction. A total of 49 eigenvectors were modeled as a sum of 2 multivariate Gaussians, from which 1000 synthetic data sets were generated. Results: The first 49 eigenvectors preserved 99.97% of the original data variability. No significant differences were observed between the mean values and standard deviation of the generated and original 49 eigenvectors (two one-sided test [TOST], P > 0.05/49) and (F-test, P > 0.05/49), both with Bonferroni correction. The mean values of the generated parameters (1000) were statistically equal to those of the original data (TOST, P > 0.05/150). The variability of the generated data was similar to the original data for the most important Zernike coefficients (F-test, P > 0.05/150). Conclusions: PCA significantly reduces the dimensionality of wavefront aberration data across 6 accommodative demands, reducing the variable space by over 66%. The synthetic data generated by the proposed wavefront model for accommodation closely resemble the original clinical data.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of Small Angle Misalignments on Ocular Wavefront Zernike Coefficients

  • Safarian Baloujeh, Ebrahim
  • Ávila, Francisco J.
  • González-Méijome, José M.
Purpose: To assess the possible impact of minor changes in fixation on wavefront measurements as a potential constraint in detecting subtle temporal variations in ocular wavefront error. Methods: Twelve healthy subjects with an average age of 36.3 ± 8.8 were instructed to put their heads in the aberrometer’s chin-rest and look at a fixation target that was embedded in the device. The fixation targets were readily observable to the participants without accommodation, thanks to the aberrometer’s Badal system. When each eye was staring at the target, its wavefront aberration was recorded three times and then averaged for further analysis. The averaged Zernike coefficients were rescaled to the smallest value of the maximum round pupil found among all eyes (4.41 mm), and this procedure was repeated for each target. Results: Alteration of the fixation targets caused changes to the Zernike coefficients of defocus (C(2,0)), vertical trefoil (C(3,–3)), vertical coma (C(3,–1)), horizontal coma (C(3,1)), oblique trefoil (C(3,3)), primary spherical aberration (C(4,0)), and secondary spherical aberration (C(6,0)), but the changes were not statistically significant. Nevertheless, an alteration in the target’s size and shape exhibited a significant correlation across all of the aforementioned coefficients in both eyes (p < 0.05). The total RMS of aberrations and the RMS of the spherical-like aberrations were both lowest while choosing the larger Maltese cross, and the bigger E-letter minimized the RMS of HOA and comatic aberrations. Conclusion: The aberrometric changes occur as a consequence of altering the fixational gaze and are within the range of the changes found after performing a near-vision task, so they might potentially act as a confounding factor when attempting to identify such small variations in the ocular wavefront. Using a smaller E-letter (5 arcmin) as an internal fixation target resulted in the least standard deviation of measurements, fixational stability, and higher accuracy in ocular wavefront measurements.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ocular Aberrations and Retinal Thickness Variations After Moderate-Term Reading on Electronic Devices by Age

  • Arcas-Carbonell, María
  • Orduna-Hospital, Elvira
  • Mechó-García, María
  • Munarriz-Escribano, María
  • Sanchez-Cano, Ana
Background: This study aims to evaluate subjective visual fatigue and objective optical and morphological changes in ocular structures after intermediate-duration reading on an iPad and an Ebook across different age groups. Methods: The sample included 108 right eyes from healthy subjects aged 18 to 66 years. The participants read for 20 min on an Ebook and another 20 min on an iPad under controlled illumination conditions. Aberrometry and retinal optical coherence tomography (OCT) measurements were taken before and after each reading session. Parameters such as total aberration, high-order aberration (HOA), low-order aberration (LOA), and retinal thickness in the nine Early Treatment Diabetic Retinopathy Study (ETDRS) areas were measured. The sample was analyzed as a whole and divided into five age groups by decade. Results: This study included 66 women (61.11%) and 42 men (38.89%), with an average age of 36.58 years (±14.83). The aberrometry results revealed significant differences in the total root mean square (RMSTOTAL) after reading on both devices (p = 0.001). Low-order aberrations (RMSLOA) also changed significantly (p = 0.001 for Ebook, p = 0.002 for the iPad), but high-order aberrations (RMSHOA) did not. Central retinal thickness increased significantly after reading on the Ebook (p < 0.001) but not on the iPad. The peripheral retinal thickness did not change significantly. Conclusion: Moderate-duration reading increases LOA and central retinal thickness, with variations by age group and more pronounced effects from the Ebook, whereas HOA remains unaffected.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A POD-NN methodology to determine in vivo mechanical properties of soft tissues. Application to human cornea deformed by Corvis ST test

  • Redaelli, Elena
  • Calvo, Begoña
  • Rodríguez Matas, José Felix
  • Luraghi, Giulia
  • Grasa, Jorge
The interaction between optical and biomechanical properties of the corneal tissue is crucial for the eye’s ability to refract and focus light. The mechanical properties vary among individuals and can change over time due to factors such as eye growth, ageing, and diseases like keratoconus. Estimating these properties is crucial for diagnosing ocular conditions, improving surgical outcomes, and enhancing vision quality, especially given increasing life expectancies and societal demands. Current ex-vivo methods for evaluating corneal mechanical properties are limited and not patient-specific. This study aims to develop a model to estimate in real-time the mechanical properties of the corneal tissue in-vivo. It is composed both by a proof of concept and by a clinical application. Regarding the proof of concept, we used high-fidelity Fluid-Structure Interaction (FSI) simulations of Non-Contact Tonometry (NCT) with Corvis ST® (OCULUS, Wetzlar, Germany) device to create a large dataset of corneal deformation evolution. Proper Orthogonal Decomposition (POD) was applied to this dataset to identify principal modes of variation, resulting in a reduced-order model (ROM). We then trained a Neural Network (NN) using the reduced coefficients, intraocular pressure (IOP), and corneal geometry derived from Pentacam® (OCULUS, Wetzlar, Germany) elevation data to predict the mechanical properties of the corneal tissue. This methodology was then applied to a clinical case in which the mechanical properties of the corneal tissue are estimated based on Corvis ST results. Our method demonstrated the potential for real-time, in-vivo estimation of corneal biomechanics, offering a significant advancement over traditional approaches that require time-consuming numerical simulations. This model, being entirely data-driven, eliminates the need for complex inverse analyses, providing an efficient and accurate tool to be implemented directly in the Corvis ST device.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Fast and slow response of the accommodation system in young and incipient-presbyope adults during sustained reading task

  • Safarian Baloujeh, Ebrahim
  • Queirós, António
  • Navarro, Rafael
  • González-Méijome, José Manuel
Objectives: To investigate the dynamics of accommodation during and immediately after a sustained reading task on a digital device across various age groups under monocular and binocular conditions. Methods: Seventeen subjects were selected and divided into three age groups: young adults (n = 4, age: 21.3 ± 3.2 years), adults (n = 4, age: 34 ± 3.56 years), and incipient presbyopes (n = 9, age: 45 ± 3.61 years). Dynamic accommodation and disaccommodation were objectively measured using the WAM-5500 open-view autorefractor during 2 min of distance fixation (Maltese cross at 6 m), 5 min of sustained near reading on a teleprompter app at the nearest readable distance, and 2 min of distance vision. Six sequential temporal landmarks were identified. Quantitative metrics for accommodation lag (AL), slope of slow accommodation (SSA), slope of slow disaccommodation (SSD), peak velocity of accommodation (PVA) and peak velocity of disaccommodation (PVD) were obtained as absolute values of spherical equivalent refractive (SER) change. Results: SSA, SSD, and AL were significantly and positively correlated with age (ρ = 0.75, 0.73, 0.51, respectively; p ≤ 0.038). For subjects under 45 years of age SSA and SSD increased quadratically with age, while for those above 45 years, both SSA and SSD decreased linearly. Linear regression of PVA and PVD with age indicated that the disaccommodation mechanism is faster than accommodation (slope = –0.15 and –0.23, respectively). PVA was significantly faster under monocular than binocular conditions (p = 0.124). Conclusions: Incipient presbyopes demonstrate a complex response in both accommodation and disaccommodation. The accommodation system responds quickly, but there is also a slower response that can provide up to an additional 1D of accommodative response during sustained near reading tasks. It is hypothesized that the crystalline lens exhibits hysteresis in returning to its unaccommodated state, due to its viscoelastic properties, which means it takes time to relax.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Change in monochromatic aberrations with accommodation in a large adult population

  • Mechó-García, María
  • Arcas-Carbonell, María
  • Orduna-Hospital, Elvira
  • Sánchez-Cano, Ana
  • Fernández-Sánchez, Vicente
  • Macedo-de-Araújo, Rute J.
  • Fernandes, Paulo
  • González-Méijome, José Manuel
  • Rozema, Jos J.
Background During accommodation, the eye undergoes significant structural changes, altering wavefront aberrations. So, this study aimed to evaluate changes in Zernike coefficients up to the 6th order with different accommodation demands and ages in a large cohort of young adults, considering the decrease in pupil size with the accommodation. Methods Aberrometric measurements for 210 healthy subjects aged 18–40 were performed with the irx3 (Imagine Eyes, Orsay, France), stimulating accommodation with the Badal system of the instrument, from 0 to 5 D. Each wavefront was rescaled to a standardized pupil size for each accommodative vergence. Variations of Zernike coefficients were analyzed for each accommodative demand, and the change of Zernike coefficients with age. Results The most notable changes observed during accommodation was the increase in C(2,0). Both C(2,±2) astigmatism showed a reduction in magnitude during accommodation. C(4,0) became less positive, or more negative, as accommodation increased. C(3,-1) remained constant as the accommodation demand increased, while C(3,1) showed an increase. Changes were observed with accommodation and age, where C(2,0) had a negative linear relationship. The C(4,0) changed gradually with age only for accommodative demands below 3 D. C(3,±1) decreased with age. Conclusions Wavefront aberration coefficients presented changes during accommodation in people aged 20–40 years. C(2,0) underwent the most pronounced changes and C(4,0) changed more with accommodation than other higher-order aberrations. Zernike coefficients C(2,0), C(4,0) and C(3,±1) decreased with age, and C(2,±2) astigmatisms showed an increase in magnitude with age. These findings were made considering the decrease in pupil size with accommodation, highlighting the importance of accounting for pupil diameter variations when evaluating wavefront aberrations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Assessment of Material Properties in Key Components of the Porcine Crystalline Lens During Overshooting

  • Salimibani, Milad
  • Dahaghin, Ali
  • Boszczyk, Agnieszka
  • Grasa, Jorge
  • Siedlecki, Damian
Purpose: The porcine eye serves as a valuable surrogate for studying human ocular anatomy and physiology because of its close resemblance. This study focuses on the influence of material properties, specifically Young’s modulus and Poisson’s ratio, on the crystalline lens overshooting amplitude during rapid eye rotation. Methods:The Finite Element Method (FEM) is employed to explore various material property scenarios, and sensitivity analysis is conducted to assess their impact on the mechanical displacement of the crystalline lens apex. The measurements were made of three output parameters: maximum displacement, time of maximum displacement appearance , and stabilization time. Results:The results highlight the significance of fine-tuning of the zonule’s material properties, particularly Young’s modulus, in achieving a reliable model. They suggest that fine-tuning of these parameters can lead to a highly reliable model, enabling in-depth research in the opto-dynamic simulations. Conclusions: Having a complete examination of crystalline lens displacement in ex vivo porcine eye models and detailing crucial factors for accurate modeling will open the path for future studies especially in conditions affected by dynamic aspects of the crystalline lens or in in vivo research.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Unraveling the impact of laser refractive surgery on corneal ectasia: an in silico study

  • Fantaci, Benedetta
  • Rodriguez Matas, José Félix
  • Squartecchia, Vittoria
  • Vavassori, Lucia
  • Calvo, Begoña
IntroductionLaser refractive surgeries are a safe option for low-to-moderate refractive corrections, providing excellent visual outcomes. Over the years, various procedures have been introduced into clinical practice, but the most performed today remain Photorefractive Keratectomy (PRK), Laser In-Situ Keratomileusis (LASIK), and Small Incision Lenticule Extraction (SMILE). Although laser refractive treatments are considered safe, clinicians have focused on the risk of post-surgical ectasia, a rare but serious complication. Ectasia is characterized by progressive corneal thinning and steepening, leading to vision distortion, irregular astigmatism, and in some cases, a reduction of visual acuity. It is still debated whether laser refractive surgeries can cause ectasia as an iatrogenic condition or merely accelerate the progression of an underlying corneal pathology, not detected during pre-surgical screening. The proposed work investigates the relationship among three laser refractive surgeries (PRK, LASIK and SMILE), currently performed in clinical practice, and ectasia onset and progression by means of an in silico analysis.MethodsAn average 3D finite-element corneal model is developed and a pathological area, characterized by reduced stiffness of varying severity grades, is defined to analyze its influence on ectasia development and progression in the pre-surgical state. Three laser treatments (PRK, LASIK and SMILE) are simulated on healthy and pathological models. Pre- and post-surgical conditions are compared to check whether any procedure worsens the pre-surgical pathological state. The optomechanical effect of each procedure on the cornea is analyzed at both healthy and pathological conditions and compared to establish which refractive procedure mostly affects corneal structure.Results and discussionWhile the three refractive procedures showed different behaviors in terms of mechanical changes affecting the cornea, from an optical perspective, as the pathology severity worsened, none of the surgeries caused a worsening in the cone’s severity with respect to pre-surgical pathological conditions. This result suggests that surgeries may have a limited role in causing post-surgical ectasia, as it seems more plausible that they accelerate the progression of an underlying pathological condition. Among the three procedures, PRK was found to be the least invasive treatment from a mechanical perspective, while SMILE showed the greatest impact on the posterior surface, suggesting a potential long-term risk for ectasia progression.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Biomechanical simulations of crystalline lens oscillations resulting from the changes in the gaze in an accommodated eye

  • Dahaghin, Ali
  • Salimibani, Milad
  • Boszczyk, Agnieszka
  • Józwik, Agnieszka
  • Grasa, Jorge
  • Przezdziecka-Dolyk, Joanna
  • Siedlecki, Damian
Purpose: The goal of the study is to introduce a generic, versatile biomechanical model that aims to reproduce the dynamic wobbling phenomenon. Methods: A systematic strategy is used, which includes a) capturing the in vivo data on a group of healthy volunteers, b) analyzing the changes in Purkinje images over time, and c) performing the combined biomechanical and optical simulations to develop the model that might be useful for understanding the mechanical behavior of the lens during wobbling and its influence on ocular dynamics. Results: Examples of lens wobbling patterns for six measured eyes were presented, and parameters characterizing the oscillatory motion were determined, including frequency of oscillations, Q-factor, damping factor and time constant. The average values of these parameters are the following: frequency: 20.0 ± 2.4 Hz; Q-factor: 1.86 ± 0.44; damping factor: 0.27 ± 0.06; time constant: 0.11 ± 0.06 s. The data reproduced by means of simulations: frequency: 19.3 Hz; Q-factor: 2.17; damping factor: 0.23; time constant: 0.15 s. This comparison reveals a good agreement between the measured and reconstructed data with the values being within the standard deviation limits. Conclusion: The developed generic model together with the presented methodology is able to reconstruct the typical crystalline lens wobbling dynamics with a satisfying accuracy. However, the observed intersubject variability highlights the need for personalized biomechanical models. The introduced model may constitute the basis for future individualization of the data, bringing broad perspectives for prospective investigations aimed to explain the biomechanical mechanisms within the eye.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of intraocular pressure on crystalline lens oscillations: a computational study using porcine eye model

  • Dahaghin, Ali
  • Salimibani, Milad
  • Boszczyk, Agnieszka
  • Grasa, Jorge
  • Siedlecki, Damian
This study addresses a crucial knowledge gap by investigating the impact of intraocular pressure (IOP) on the wobbling characteristics of the crystalline lens in an ex vivo setting. It utilizes previous validated computational porcine eye models, which offer anatomical and physiological similarities to the human eye. These models incorporate fluid-structure interaction (FSI) to simulate the mechanical interaction between the fluids of the eye and the solid structures. Simulations were conducted under constant mechanical properties and boundary conditions, allowing for precise quantification of lens wobbling behavior with varying IOP levels. Various trends in lens displacement were observed at various IOP levels, revealing significant variations in both magnitude and duration. The results demonstrate the central role of intraocular pressure in influencing lens overshooting during rotational motion, with potential clinical implications. The observed lens displacement patterns, particularly in conditions like glaucoma, underscore the importance of considering IOP as a critical factor in understanding ocular biomechanics. Beyond immediate biomechanical relevance, the study’s findings suggest the potential use of the Purkinje imaging system as a non-invasive method for IOP estimation based on lens overshoot as an “inverse solution” strategy. This non-invasive imaging technique offers a promising alternative to traditional methods, minimizing patient discomfort and potentially enhancing measurement precision.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of gradient-index lenses on the optical performance of SyntEyes

  • Lockett-Ruiz, Veronica
  • Navarro, Rafael
  • Rozema, Jos
his study analyzes the effect of two different gradient index (GRIN) crystalline lens models on ocular optical performance compared to that of a homogeneous lens. Using the biometric data of 200 SyntEyes (synthetically generated eyes), we implemented three lens models: homogeneous, GRIN, and GRINCU (gradient index and gradient curvature of the isoindicial surfaces). Using the three lens models, we conducted finite ray tracing on the SyntEyes samples, incorporating five different curvature gradients into the GRINCU setup. We calculated the average cardinal points and Zernike aberration coefficients for each SyntEyes sample, along with the cardinal points for each lens model. GRINCU lens configurations with increased IIS curvature toward the center result in an average forward shift of the lens principal planes, leading to increased ocular power relative to the homogeneous lens model. Steeper curvature gradients of the IIS towards the lens center result in reduced astigmatism, defocus, lateral coma, and primary spherical aberration. The interplay between the lens’s gradient index and IIS curvature gradient alters the optical properties of the eye as a whole, highlighting the crucial role of the lens’s internal properties in optical performance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Minimally Invasive Glaucoma Surgery Procedure in the Human Eye. A Fluid Structure Interaction Study

  • Redaelli, Elena
  • Perri, Letizia Maria
  • Calvo, Begoña
  • Grasa, Jorge
  • Luraghi, Giulia
Aqueous humor is a clear fluid pressurized at an intraocular pressure (IOP) within a range of 8–20 mmHg in healthy conditions that fills and shapes the anterior and posterior chambers of the eye. It is typically drained through the trabecular meshwork, but reduced permeability of this structure can lead to impaired drainage, elevated IOP, and the development of glaucoma. Minimally invasive glaucoma surgeries (MIGS) offer a treatment option by implanting micro stents to create alternative pathways for aqueous humor drainage. Despite their potential, limited research has explored the biomechanical changes in ocular tissues and the hydrodynamic interactions following MIGS implantation. This paper aims to study the aqueous humor flow after the surgery by means of computational simulations. For the first time, the implantation process has been simulated to assess residual stresses on ocular structures post‐implantation. Then, this study introduces a Fluid–Structure Interaction (FSI) simulation to model the aqueous humor dynamics after MIGS implantation. The results demonstrate the necessity of FSI simulations, as they reveal the interplay between the eye's biomechanical properties and the aqueous humor dynamics. The advantage of using an FSI simulation is its ability to capture the aqueous humor dynamics, providing a more realistic representation compared to the Computational Fluid Dynamic (CFD) simulations found in the literature. Using only CFD, the outflow velocity of the aqueous humor through the stent is approximately 1e−4 m/s, whereas with an FSI approach, the velocity reaches up to 0.8 m/s as the deformation of the ocular tissues has a substantial impact on the flow dynamics and cannot be neglected. This novel methodology can be potentially used for visualizing and quantifying the aqueous humor flow as a function of implant design, position and dimensions in order to design next‐generation MIGS devices and optimize implantation strategies, offering significant advancements in glaucoma treatment.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Modeling the aging crystalline lens: a quantitative explanation of the lens paradox

  • Lockett-Ruiz, Veronica
  • Navarro, Rafael
The lens paradox refers to the phenomenon where the human lens loses refractive power, despite the increase in external curvature and thickness associated with aging. In this study, we develop an age-dependent GRINCU (gradient index and gradient curvature of the iso-indicial surfaces) lens model and propose a quantitative explanation for the lens paradox. Drawing on various sources in the literature, we configured a lens with an age-dependent geometry and implemented this model for an age range of 23–73 years. By adjusting the internal curvature gradient for each age, we optimized the lens refractive power to match experimental measurements within this age range. To compare the results obtained by varying the curvature gradient of the iso-indicial surfaces (IISs), we also modeled a concentric configuration for each age. Among the two configurations, only the model with a variable curvature gradient successfully replicated the decline in refractive power associated with aging, whereas the concentric configuration showed an increasing trend in power with age. To accurately explain the lens paradox, it is crucial to consider not only the changes in refractive index with aging but also the changes in the internal curvature gradient of the lens.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Zulu ocular biometry differs fundamentally from that of Europeans – A modelling analysis

  • Lockett-Ruiz, Veronica
  • Evans, Tanya
  • Navarro, Rafael
  • Mashige, Khathutshelo Percy
  • Rozema, Jos J.
Purpose: The accuracy of ocular refraction calculations depends on reliable biometry and the validity of the models upon which the calculations are based. Most models are based on European eyes, so their validity in sub-Saharan Africans may be questioned, potentially contributing to suboptimal postoperative outcomes. Hence, this study developed an optical eye model tailored to a Zulu cohort. Methods: Ocular biometry data were collected from 192 near-emmetropic (i.e., non-cycloplegic spherical equivalent within ±1D) young individuals of Zulu descent in Durban, South Africa. Key biometric parameters, including axial length, corneal thickness, anterior chamber depth, crystalline lens thickness and vitreous chamber depth, were measured and input into Bennett's and Royston's equations to develop the eye model. This model was subsequently compared to the eyes of 32 near-emmetropic young European adults that were used previously to help develop the SyntEyes model. Statistical analysis was performed to identify significant differences in ocular structural parameters between the models. Results: Zulu eyes exhibited marked differences compared to European eyes. On average, Zulu eyes had deeper anterior chambers (+0.28 mm, t-test, p < 0.001), thinner crystalline lenses (−0.19 mm, p < 0.001) and lower corneal power (−0.83 D, p = 0.001). However, the total ocular power of Zulu eyes was greater due to a more powerful crystalline lens (+2.60 D, p < 0.001). No significant difference in refractive error or axial length was observed between the two populations. Conclusions: The ocular biometry of the Zulu population differs significantly from that of the European population, particularly in corneal and crystalline lens power, lens thickness and anterior chamber depth. This has important implications for intraocular lens power calculations, glaucoma risk assessment and other diagnostic procedures. Accurate, population-specific references are essential for optimising vision correction and enhancing ophthalmic healthcare outcomes in regions with populations underrepresented in the literature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Comparative evaluation of the mechanical properties of amniotic membranes for corneal grafting: Effects of cryopreservation, lyophilization, and dehydration

  • Fantaci, B.
  • Calvo, B.
  • Mesa, A.M.
  • Ortillés, A.
In both human and veterinary ophthalmology, stromal to full-thickness corneal defects can be treated using several techniques that involve various biomaterials, which support healing while preserving vision. Among these, the amniotic membrane stands out due to its multifaceted biological properties, including anti-inflammatory, antimicrobial, and regenerative capabilities. Three main preservation methods (cryopreservation, dehydration, and lyophilization) have been developed to facilitate amniotic membrane clinical use. However, these methods may significantly alter its mechanical and structural integrity, which are critical for graft success. This study investigates the mechanical performance of bovine amniotic membranes for veterinary use, preserved using the above-mentioned techniques, by means of uniaxial tensile and inflation tests in a non-biological in vitro setting. Structural and chemical differences are also analyzed using scanning electron microscopy and energy-dispersive X-ray spectroscopy. Despite structural differences arose among the samples, these differences did not alter or worsen the structural resistance of the membranes. All samples withstood 5 inflation cycles of 200 mmHg without leaking.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Biomechanically informed patient-specific in silico models for laser refractive surgery

  • Fantaci, Benedetta
  • Redaelli, Elena
  • Martí, Mònica
  • Julio, Gemma
  • Barraquer, Anton
  • Lamarca, Jose
  • Grasa, Jorge
  • Calvo, Begoña
Purpose: Corneal biomechanics plays a key role in the planning and outcomes of laser refractive surgery. This study presents a validated methodology for simulating patient-specific refractive treatments, focusing on the optomechanical effects of the three most commonly performed procedures: PRK, LASIK, and SMILE. Methods: For the first time, patient-specific mechanical properties of the cornea were incorporated into finite element simulations. These properties were estimated using an artificial neural network trained on in silico data from fluid–structure interaction models of non-contact tonometry. The tool takes as input corneal deformation images acquired with the Corvis ST device, intraocular pressure (IOP), and corneal geometry obtained from Pentacam imaging. IOP is estimated independently of corneal geometry and mechanical properties using a novel algorithm developed in prior studies. The methodology was tested on a cohort of 58 eyes from 29 patients who underwent one of the three procedures. Results: By integrating patient-specific geometry, IOP, and biomechanical characterization, the proposed framework successfully simulated postoperative corneal responses, yielding a mean dioptric error of +0.40 ± 0.30 D relative to clinical outcomes. Among the three procedures, SMILE produced the highest mechanical impact on the corneal model. Conclusion: This study introduces a personalized, biomechanically informed approach to simulate corneal behavior following refractive surgery. The proposed framework enhances surgical planning and improves prediction of postoperative refractive stability, offering a step toward personalized refractive correction and safer, more predictable clinical outcomes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Corneal deformation mapping and FE-based strain analysis via digital image correlation: Biomechanical changes after CXL and laser refractive surgery

  • Fantaci, Benedetta
  • Frechilla, Alejandro
  • Frigelli, Matteo
  • Büchler, Philippe
  • Kling, Sabine
  • Calvo, Begoña
Accurate assessment of corneal mechanical properties is critical for understanding ocular biomechanics, predicting refractive surgery outcomes, and optimizing cross-linking (CXL) treatments. Conventional uniaxial tensile testing is limited by non-physiological boundary conditions and simplified stress distributions. Inflation testing more closely reproduces the in vivo stress state but has traditionally lacked spatially distributed deformation mapping. In this work, we present an integrated experimental–computational protocol combining inflation testing of freshly enucleated porcine eyes with high-resolution three-dimensional digital image correlation (3D-DIC). Fifteen corneas were analyzed across three cohorts: (i) de-epithelialized controls, (ii) CXL-treated (standard Dresden protocol), and (iii) anterior stromal ablation via femtosecond laser. Samples were subjected to controlled intraocular pressure (IOP) elevations up to 40 mmHg. The 3D-DIC approach provided dense, pointwise displacement and strain maps across the anterior surface, successfully quantifying the localized stiffening effects of CXL and the increased compliance induced by stromal ablation. The surface kinematics was post-processed using a membrane-theory formulation to resolve principal in-plane strains, from which a regional strain metric was derived for inverse modeling with a fully three-dimensional finite element model to estimate anisotropic hyperelastic parameters of porcine corneal tissue. Overall, the method establishes an end-to-end route from physiologic loading to regional surface strain quantification and constitutive parameter identification, enabling quantitative evaluation of treatment-induced biomechanical changes in the cornea.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Establishing standardization guidelines for finite-element optomechanical simulations of refractive laser surgeries: an application to photorefractive keratectomy

  • Fantaci, Benedetta
  • Calvo, Begoña
  • Barraquer Compte, Rafael Ignacio
  • Picó, Andrés
  • Ariza Gracia, Miguel Ángel
Supported by the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 956720 and the Department of Industry and Innovation (Government of Aragon) through the research group Grant T24–20R (cofinanced with Feder 2014-2020: Construyendo Europa desde Aragón). Part of the work was performed by the ICTS “NANBIOSIS” specifically by the High Performance Computing Unit (U27), of the CIBER in Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN at the University of Zaragoza)., Purpose: Computational models can help clinicians plan surgeries by accounting for factors such as mechanical imbalances or testing different surgical techniques beforehand. Different levels of modeling complexity are found in the literature, and it is still not clear what aspects should be included to obtain accurate results in finite-element (FE) corneal models. This work presents a methodology to narrow down minimal requirements of modeling features to report clinical data for a refractive intervention such as PRK. Methods: A pipeline to create FE models of a refractive surgery is presented: It tests different geometries, boundary conditions, loading, and mesh size on the optomechanical simulation output. The mechanical model for the corneal tissue accounts for the collagen fiber distribution in human corneas. Both mechanical and optical outcome are analyzed for the different models. Finally, the methodology is applied to five patient-specific models to ensure accuracy. Results: To simulate the postsurgical corneal optomechanics, our results suggest that the most precise outcome is obtained with patient-specific models with a 100 µm mesh size, sliding boundary condition at the limbus, and intraocular pressure enforced as a distributed load. Conclusions: A methodology for laser surgery simulation has been developed that is able to reproduce the optical target of the laser intervention while also analyzing the mechanical outcome. Translational Relevance: The lack of standardization in modeling refractive interventions leads to different simulation strategies, making difficult to compare them against other publications. This work establishes the standardization guidelines to be followed when performing optomechanical simulations of refractive interventions., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Localized refractive changes induced by symmetric and progressive asymmetric intracorneal ring segments assessed with a 3D finite-element model

  • García de Oteyza, Gonzalo
  • Álvarez de Toledo, Juan
  • Barraquer, Rafael I
  • Kling, Sabine
This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 956720 and from the Swiss National Science Foundation (Ambizione PZ00P2_174113 to S.K.)., To build a representative 3D finite element model (FEM) for intracorneal ring segment (ICRS) implantation and to investigate localized optical changes induced by different ICRS geometries, a hyperelastic shell FEM was developed to compare the effect of symmetric and progressive asymmetric ICRS designs in a generic healthy and asymmetric keratoconic (KC) cornea. The resulting deformed geometry was assessed in terms of average curvature via a biconic fit, sagittal curvature (K), and optical aberrations via Zernike polynomials. The sagittal curvature map showed a locally restricted flattening interior to the ring (Kmax −11 to −25 dpt) and, in the KC cornea, an additional local steepening on the opposite half of the cornea (Kmax up to +1.9 dpt). Considering the optical aberrations present in the model of the KC cornea, the progressive ICRS corrected vertical coma (−3.42 vs. −3.13 µm); horizontal coma (−0.67 vs. 0.36 µm); and defocus (2.90 vs. 2.75 µm), oblique trefoil (−0.54 vs. −0.08 µm), and oblique secondary astigmatism (0.48 vs. −0.09 µm) aberrations stronger than the symmetric ICRS. Customized ICRS designs inspired by the underlying KC phenotype have the potential to achieve more tailored refractive corrections, particularly in asymmetric keratoconus patterns., info:eu-repo/semantics/publishedVersion