Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 43
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unified view of magnetic nanoparticle separation under magnetophoresis

  • Leong, Sim Siong|||0000-0001-8247-0169
  • Ahmad, Zainal
  • Low, Siew Chun|||0000-0002-1827-5665
  • Camacho, Juan|||0000-0002-8095-4167
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Lim, JitKang|||0000-0002-3205-1617
The migration process of magnetic nanoparticles and colloids in solution under the influence of magnetic field gradients, which is also known as magnetophoresis, is an essential step in the separation technology used in various biomedical and engineering applications. Many works have demonstrated that in specific situations, separation can be performed easily with the weak magnetic field gradients created by permanent magnets, a process known as low-gradient magnetic separation (LGMS). Due to the level of complexity involved, it is not possible to understand the observed kinetics of LGMS within the classical view of magnetophoresis. Our experimental and theoretical investigations in the last years unravelled the existence of two novel physical effects that speed up the magnetophoresis kinetics and explain the observed feasibility of LGMS. Those two effects are (i) cooperative magnetophoresis (due to the cooperative motion of strongly interacting particles) and (ii) magnetophoresis-induced convection (fluid dynamics instability originating from inhomogeneous magnetic gradients). In this feature article, we present a unified view of magnetophoresis based on the extensive research done on these effects. We present the physical basis of each effect and also propose a classification of magnetophoresis into four distinct regimes. This classification is based on the range of values of two dimensionless quantities, namely, aggregation parameter N∗ and magnetic Grashof number Grm, which include all of the dependency of LGMS on various physical parameters (such as particle properties, thermodynamic parameters, fluid properties, and magnetic field properties). This analysis provides a holistic view of the classification of transport mechanisms in LGMS, which could be particularly useful in the design of magnetic separators for engineering applications.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

PLGA protein nanocarriers with tailor-made fluorescence/MRI/PET imaging modalities

  • Zhang, Yajie
  • García Gabilondo, Miguel
  • Grayston, Alba
  • Feiner, Irene V. J.
  • Anton Sales, Irene
  • Azevedo Loiola, Rodrigo
  • Llop, Jordi
  • Ramos Cabrer, Pedro
  • Barba, Ignasi
  • Garcia Dorado, David
  • Gosselet, Fabien
  • Rosell, Anna
  • Roig Serra, Anna
Designing theranostic nanocarriers with high protein payload and multimodality tracking without cross interferences between the different imaging probes and the delicate protein cargo is challenging. Here, chemical modifications of poly(lactic-co-glycolic acid) (PLGA) to produce nanocapsules (NCs) that incorporate several imaging moieties are reported. The biocompatible and biodegradable PLGA-NCs can be endowed with a magnetic resonance imaging (MRI) reporter, two fluorescence imaging probes (blue/NIR) and a positron emission tomography (PET) reporter. The modular integration of these imaging moieties into the shell of the NCs is successfully achieved without affecting the morphochemical properties of the nanocarrier or the protein loading capacity. In vivo biodistribution of the NCs is monitored by MRI, PET and NIRF and the results from different techniques are analyzed comparatively. The viabilities of two different human endothelial cells in vitro show no toxicity for NC concentration up to 100 μg mL−1 . The morbidity of mice for 2 weeks after systemic administration and the hepatic/pancreatic enzymes at the plasma level indicate their in vivo biosafety. In summary, the new theranostic PLGA nanoplatform presented here shows versatile in vitro/in vivo multimodal imaging capabilities, excellent biosafety and over 1 wt% protein loading., The Acciones Complementarias program from the Instituto de Salud Carlos III, Spain, co-financed by the European Regional Development Fund (AC17/00004 grant) as part of the MAGBBRIS project (Euronanomed III 8th joint call), and the RETICS INVICTUS RD16/0019/0021 are acknowledged. The Miguel Servet program (CPII15/00003) and PFIS program (FI17/00073) from Fondo de Investigaciones SanitariasInstituto de Salud Carlos III and ERDF supported A. Rosell and A. G. research contracts. This work was also partially supported by the Spanish Ministry of Science, Innovation and Universities through the grants PCIN-2017-090, RTI2018- 096273-B-I00, CTQ2017-87637-R, SAF2017-87670-R, SEV-2015- 0496 and MDM-2017-0720 and by the Generalitat de Catalunya grants (2017SGR765 & 2017SGR1427). Yajie Zhang is supported by the China Scholarship Council (CSC). FG and RAL are supported by the French national agency (ANR) through the grant ANR-17-ENM3-0005-01. The authors thank Dr Vanessa GómezVallejo, Dr Unai Cossío, Dr Xabier Rios and Zuriñe Baz for support in labelling and PET in vivo experimentation. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MRI/Photoluminescence Dual-Modal Imaging Magnetic PLGA Nanocapsules for Theranostics

  • Zhang, Yajie
  • García Gabilondo, Miguel
  • Rosell, Anna
  • Roig Serra, Anna
Developing multifunctional and biocompatible drug delivery nanoplatforms that integrate high drug loads and multiple imaging modalities avoiding cross-interferences is extremely challenging. Here we report on the successful chemical reaction of the high quantum yield biodegradable and photoluminescent polyester (BPLP) with the poly(lactic-co-glycolic acid) (PLGA) polymer to fabricate biocompatible photoluminescent nanocapsules (NCs). Furthermore, we transform the PLGA-BPLP NCs into a magnetic resonance (MR)/photoluminescence dual-modal imaging theranostic platform by incorporating superparamagnetic iron oxide nanoparticles (SPIONs) into the polymeric shell. In vitro phantoms confirmed the excellent MRI-r2 relaxivity values of the NCs whilst the cellular uptake of these NCs was clearly observed by fluorescence optical imaging. Besides, the NCs (mean size ~270 nm) were loaded with ~1 wt% of a model protein (BSA) and their PEGylation provided a more hydrophilic surface. The NCs show biocompatibility in vitro, as hCMEC/D3 endothelial cells viability was not affected for particle concentration up to 500 μg/mL. Interestingly, NCs decorated with SPIONs can be exploited for magnetic guiding and retention., This work was partially supported by the Spanish Ministry of Science, Innovation and Universities through the grants PCIN-2017-090, RTI2018-096273-B-I00, CTQ2017-87637-R, SAF2017-87670-R, SEV-2015-0496 and MDM-2017-0720 and by the Generalitat de Catalunya grants (2017SGR765 & 2017SGR1427). Yajie Zhang was supported by the China Scholarship Council (CSC). The Acciones Complementarias program from the Instituto de Salud Carlos III, Spain, co-financed by the European Regional Development Fund (AC17/00004 grant) as part of the MAGBBRIS project (Euronanomed III 8th joint call), and the RETICS INVICTUS RD16/0019/0021 were acknowledged. Miguel Servet program (CPII15/00003) from Fondo de Investigaciones Sanitarias-Instituto de Salud Carlos III and ERDF, supported A. Roig research contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Computer Simulations of the interaction between SARS-CoV-2 spike glycoprotein and different surfaces

  • Malaspina, David C.
  • Faraudo, Jordi
A prominent feature of coronaviruses is the presence of a large glycoprotein spike protruding from a lipidic membrane. This glycoprotein spike determines the interaction of coronaviruses with the environment and the host. In this paper, we perform all atomic molecular dynamics simulations of the interaction between the SARS-CoV-2 trimeric glycoprotein spike and surfaces of materials. We considered a material with high hydrogen bonding capacity (cellulose) and a material capable of strong hydrophobic interactions (graphite). Initially, the spike adsorbs to both surfaces through essentially the same residues belonging to the receptor binding subunit of its three monomers. Adsorption onto cellulose stabilizes in this configuration, with the help of a large number of hydrogen bonds developed between cellulose and the three receptor-binding domains of the glycoprotein spike. In the case of adsorption onto graphite, the initial adsorption configuration is not stable and the surface induces a substantial deformation of the glycoprotein spike with a large number of adsorbed residues not pertaining to the binding subunits of the spike monomers., This work was supported by the Spanish Ministry of Science and Innovation through grant RTI2018-096273-B-I00 and the “Severo Ochoa” Grant SEV-2015-0496 for Centres of Excellence in R&D awarded to ICMAB. We thank the CESGA supercomputing center for computer time and technical support at the Finisterrae supercomputer. D. C. Malaspina is supported by the European Union Horizon 2020 research and innovation programme under Marie Sklodowska-Curie grant agreement No. 6655919., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface specificity and mechanistic pathway of defluorination of C60F48 on coinage metals

  • Palacios-Rivera, Rogger
  • Malaspina, David C.
  • Tessler, Nir
  • Solomeshch, Olga
  • Faraudo, Jordi
  • Barrena, Esther
  • Ocal, Carmen
We provide experimental and theoretical understanding on fundamental processes taking place at room temperature when a fluorinated fullerene dopant gets close to a metal surface. By employing scanning tunneling microscopy and photoelectron spectroscopies, we demonstrate that the on-surface integrity of C60F48 depends on the interaction with the particular metal it approaches. Whereas on Au(111) the molecule preserves its chemical structure, on more reactive surfaces such as Cu(111) and Ni(111), molecules interacting with the bare metal surface lose the halogen atoms and transform to C60. Though fluorine–metal bonding can be detected depending on the molecular surface density, no ordered fluorine structures are observed. We show the implications of the metal-dependent de-fluorination in the electronic structure of the molecules and the energy alignment at the molecule–metal interface. Molecular dynamics simulations with ReaxFF reactive force field corroborate the experimental facts and provide a detailed mechanistic picture of the surface-induced de-fluorination, which involves the rotation of the molecule on the surface. Outstandingly, a thermodynamic analysis indicates that the effect of the metal surface is lowering and diminishing the energy barrier for C–F cleave, demonstrating the catalytic role of the surface. The present study contributes to in-depth knowledge of the mechanisms that affect the degree of stability of chemical species on surfaces, which is essential to advance our understanding of the chemical reactivity of metals and their role in on-surface chemical reactions., This work has been supported by the Spanish Government under projects PID2019-110907GB-I00, MAT2016-77852-C2-1-R (AEI/FEDER, UE), RTI2018-096273-B-I00, the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496) and the Generalitat de Catalunya 2017-SGR668. R. P. R. has been developing this work as part of his doctorate in Materials Science at the Universitat Autònoma de Barcelona (UAB). D. C. M. is supported by the European Union's Horizon 2020 Research and Innovation Programme under Marie Sklodowska-Curie grant agreement No. 6655919. O. S. is grateful for the support by the Center for Absorption in Science of the Ministry of Immigrant Absorption and the Committee for Planning and Budgeting of the Council for Higher Education in Israel under the framework of the KAMEA Program. We thank CESGA Supercomputing center for technical support and computer time at the supercomputer Finisterrae II. We are indebted to G. Sauthier from the ICN2 Photoemission Spectroscopy Facility. We are grateful to M. Paradinas and A. Mugarza from ICN2 for providing the Ni(111) crystal., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bacterial nanocellulose as a corneal bandage material: a comparison with amniotic membrane

  • Anton Sales, Irene
  • D’Antin, Justin Christopher
  • Fernández Engroba, Jorge
  • Charoenrook, Victor
  • Laromaine, Anna
  • Roig Serra, Anna
  • Michael, Ralph
Corneal trauma and ulcerations are leading causes of corneal blindness around the world. These lesions require attentive medical monitoring since improper healing or infection has serious consequences in vision and quality of life. Amniotic membrane grafts represent the common solution to treat severe corneal wounds. However, amniotic membrane's availability remains limited by the dependency on donor tissues, its high price and short shelf life. Consequently, there is an active quest for biomaterials to treat injured corneal tissues. Nanocellulose synthetized by bacteria (BNC) is an emergent biopolymer with vast clinical potential for skin tissue regeneration. BNC also exhibits appealing characteristics to act as an alternative corneal bandage such as; high liquid holding capacity, biocompatibility, flexibility, natural – but animal free-origin and a myriad of functionalization opportunities. Here, we present an initial study aiming at testing the suitability of BNC as corneal bandage regarding preclinical requirements and using amniotic membrane as a benchmark. Bacterial nanocellulose exhibits higher mechanical resistance to sutures and slightly longer stability under in vitro and ex vivo simulated physiological conditions than amniotic membrane. Additionally, bacterial nanocellulose offers good conformability to the shape of the eye globe and easy manipulation in medical settings. These excellent attributes accompanied by the facts that bacterial nanocellulose is stable at room temperature for long periods, can be heat-sterilized and is easy to produce, reinforce the potential of bacterial nanocellulose as a more accessible ocular surface bandage., Authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the RTI2018-096273-B-I00, project, the ‘Severo Ochoa’ Programme for Centers of Excellence in R&D (SEV-2015-0496) and the PhD scholarship of I. A. S. (BE-2017-076734) and the Generalitat de Catalunya with the 2017SGR765 and the 2019LLAV00046 projects. Authors also thank María Jesús Sánchez-Guisadofor for her assistance with the endotoxin study. The ICMAB technical services (TGA and X-Ray) and Marcos Rosado from the ICN2 electron microscopy service are acknowledged. The ICMAB members (IAS, AL, AR) participate in the CSIC Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy, SUSPLAST and in the Aerogels COST ACTION (CA 18125). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Radiolabeled Cobaltabis(dicarbollide) Anion–Graphene Oxide Nanocomposites for In Vivo Bioimaging and Boron Delivery

  • Ferrer Ugalde, Albert
  • Sandoval, Stefania
  • Pulagam, Krishna Reddy
  • Muñoz Juan, Amanda
  • Laromaine, Anna
  • Llop, Jordi
  • Tobias, Gerard
  • Núñez Aguilera, Rosario
A carbon-based hybrid nanocomposite, which consists of monoiodinated boron-cluster derivatives covalently attached to graphene oxide, is hereby introduced. This GO-I-COSAN has been synthesized using a novel boron-rich cobaltabis(dicarbollide) precursor with one iodide group attached to one of the boron atoms of the cluster (I-COSAN) and designed to be subsequently labeled with radioactive 124I for its use in positron emission tomography (PET). In vitro cytotoxicity studies of GO-I-COSAN with HeLa cells at different concentrations up to 48 h proved that the cell mortality was lower than 10%, indicating minimal cytotoxicity of the nanomaterial. Remarkably, internalization of the nanomaterial by cells was confirmed by transmission electron microscopy, which indicated its accumulation in the cytoplasm, without causing changes in either the size or morphology of the cells. Additionally, in vivo tests using Caenorhabditis elegans confirmed that GO-I-COSAN could be ingested by the worms, showing no significant damage and very low toxicity, which supports the results observed in the in vitro studies. Radioisotopic labeling of I-COSAN using a palladium-catalyzed isotopic exchange reaction with Na[124I]I and its subsequent functionalization onto GO was performed successfully, leading to formation of the radioactive nanocomposite GO-[124I]I-COSAN, which was quickly injected in mice. PET images at different times revealed excellent in vivo stability of the developed nanomaterial. No activity in thyroid and stomach was observed even at long times, proving that iodide did not detach from the material. GO-[124I]I-COSAN presented a favorable biodistribution profile, being mainly accumulated in the liver and slightly in the lung, with a long residence time on blood and progressive elimination via the gastrointestinal tract. It is noteworthy that the high boron content of this material paves the way toward theranostics because it benefits of a traceable boron delivery for boron neutron capture therapy., This work was supported by the Spanish Ministry of Science and Innovation MICINN, through the Severo Ochoa Program for Centers of Excellence FUNFUTURE (CEX2019-000917- S), for funding with an internal Severo Ochoa FIP project. J.L. thanks the Spanish Ministry of Economy and Competitiveness for funding through Grant CTQ2017-87637-R. Part of the work was conducted under the Maria de Maeztu Units of Excellence Programme (Grant MDM-2017-0720). A.M.-J. and A.L. are thankful for financial support from the Spanish Ministry of Science and Innovation through Project RTI2018- 096273-B-I00 and a Ph.D. scholarship for A.M.J. (FPU18/ 05190) and the Generalitat de Catalunya with Projects 2017SGR765 and 2017SGR581. A.M.-J. and A.L. participated in the MICINN, “Research Networks” nanoCARE (RED2018- 102469-T). This work has been conducted within the Biotechnology Doctoral Program of the Autonomous University of Barcelona (A.M.J). The authors thank the staff from the Servei de Cultius Cel·lulars and Servei de Microscopia, ̀ both at the UAB, for performing the cytotoxicity studies, cellular uptake analysis, and HRTEM., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomistic Simulations of COSAN: Amphiphiles without a Head‐and‐Tail Design Display “Head and Tail” Surfactant Behavior

  • Malaspina, David C.
  • Viñas, Clara
  • Teixidor, Francesc
  • Faraudo, Jordi
Cobaltabisdicarbollide (COSAN) anions have an unexpectedly rich self-assembly behavior, being able to lead to vesicles and micelles without having a classical surfactant molecular architecture. New terms such as theta-shaped amphiphile, stealth amphiphile or intrinsic amphiphile have been coined to describe this molecule and new driving forces such as the “chaotropic effect” were invoked to understand its novel features. A key aspect in these interpretations of COSAN behavior is the assumption that the most stable form of these ions is the transoid rotamer which lacks a “hydrophilic head” and a “hydrophobic tail”. Using implicit solvent DFT calculations here we show that in water, the cisoid rotamer (which has a polar and an apolar region) is the most stable form of COSAN. Our MD simulations in water show that this cisoid rotamer has a well-defined hydrophilic polar “head” and a hydrophobic apolar “tail”. In addition, our simulations show that the properties of this rotamer in water (interfacial affinity, micellization) match with those expected for a classical surfactant. Therefore, we conclude that the experimental results for the COSAN ions can be now understood in terms of its amphiphilic molecular architecture., This work was supported by the Generalitat de Catalunya (grant 2017SGR1720) and the Spanish Ministry of Economy and Competitiveness through grants RTI2018‐096273‐B‐I00, CTQ2016‐75150‐R and the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐2015‐0496) awarded to ICMAB. We thank the Spanish national supercomputing network (BSC‐RES) for the award of computer time at the Minotauro supercomputer. D. C. Malaspina is supported by the European Union's Horizon 2020 research and innovation programme under Marie Sklodowska‐Curie grant agreement No. 6655919., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bacterial Nanocellulose and Titania Hybrids: Cytocompatible and Cryopreservable Cell Carriers

  • Anton Sales, Irene
  • Roig Sánchez, Soledad
  • Sánchez Guisado, M.Jesús
  • Laromaine, Anna
  • Roig Serra, Anna
Carrier-assisted cell transplantation offers new strategies to improve the clinical outcomes of cellular therapies. Bacterial nanocellulose (BC) is an emerging biopolymer that might be of great value in the development of animal-free, customizable, and temperature-stable novel cell carriers. Moreover, BC exhibits a myriad of modification possibilities to incorporate additional functionalities. Here, we have synthesized BC-titanium dioxide (TiO2) nanocomposites (BC/TiO2) to evaluate and compare the suitability of not only BC but also a model hybrid nanobiomaterial as cell transplantation supports. This work provides thorough information on the interactions between BC-based substrates and model human cells in terms of cell attachment, morphology, proliferation rate, and metabolic activity. Two methods to partially retrieve the adhered cells are also reported. Both BC and BC/TiO2 substrates are positively evaluated in terms of cytocompatibility and endotoxin content without detecting major differences between BC and BC nanocomposites. Lastly, the effective cryopreservation of cells-BC and cells-BC/TiO2 constructs, yielding high cell viability and intact cell carrier's characteristics after thawing, is demonstrated. Taken together, our results show that both BC and BC/TiO2 enable to integrate the processes of expansion and long-term storage of human cells in transportable, robust and easy to manipulate supports., Authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the RTI2018-096273–B-I00, project, the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and the PhD scholarships of I.A.S. (BE-2017-076734) and S.R.S. (BES-2016-077533). The Generalitat de Catalunya with the 2017SGR765 and the 2019LLAV00046 projects are also acknowledged. The authors also express their gratitude to the technical services of ICMAB (Nanoquim, AFM and TGA), UAB (cell culture and microscopy facilities), and ICN2 (electron microscopy). The authors participate in the CSIC Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy, SUSPLAST, in the Aerogels COST ACTION (CA 18125) and in the Research network NANOCARE from MICINN (RED2018-102469-T)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanorods Based on Mesoporous Silica Containing Iron OxideNanoparticles as Catalytic Nanomotors: Study of Motion Dynamics

  • Mestre, Rafael
  • Cadefau, Núria
  • Hortelão, Ana C.
  • Grzelak, Jan Jacek
  • Gich, Martí
  • Roig Serra, Anna
  • Sánchez, Samuel
Self‐propelled particles and, in particular, those based on mesoporous silica, have raised considerable interest due to their potential applications in the environmental and biomedical fields thanks to their biocompatibility, tunable surface chemistry and large porosity. Although spherical particles have been widely used to fabricate nano‐ and micromotors, not much attention has been paid to other geometries, such as nanorods. Here, we report the fabrication of self‐propelled mesoporous silica nanorods (MSNRs) that move by the catalytic decomposition of hydrogen peroxide by a sputtered Pt layer, Fe2O3 nanoparticles grown within the mesopores, or the synergistic combination of both. We show that motion can occur in two distinct sub‐populations characterized by two different motion dynamics, namely enhanced diffusion or directional propulsion, especially when both catalysts are used. These results open up the possibility of using MSNRs as chassis for the fabrication of self‐propelled particles for the environmental or biomedical fields., R.M. thanks “la Caixa” Foundation through IBEC International PhD Programme “la Caixa” Severo Ochoa fellowships (code LCF/BQ/SO16/52270018). A.C.H. thanks MINECO for the Severo Ochoa PhD fellowship. J.G. has received financial support through the “la Caixa” INPhINIT Fellowship Grant for Doctoral Studies at Spanish Research Centers of Excellence (Grant code: LCF/BQ/DI17/11620041), “la Caixa” Banking Foundation (ID100010434), Barcelona, Spain. The CERCA program by the Generalitat de Catalunya, the Secretaria d′Universitats i Recerca del Departament d′Empresa i Coneixement de la Generalitat de Catalunya through the projects 2017SGR1148 & 2017SGR765 are acknowledged, as well as the Ministerio de Ciencia, Innovación y Universidades (MCIU)/Agencia Estatal de Investigación (AEI)/Fondo Europeo de Desarrollo Regional (FEDER, UE) through the projects RTI2018‐098164‐B‐I00 & RTI2018‐096273‐B‐I00 and Severo Ochoa Programme for Centres of Excellence in R&D (CEX2019‐000917‐S and CEX2018‐000789‐S). This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement No 866348)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unified View of Magnetic Nanoparticle Separation under Magnetophoresis

  • Leong, Sim Siong
  • Ahmad, Zainal
  • Low, Siew Chun
  • Camacho, Juan
  • Faraudo, Jordi
  • Lim, JitKang
The migration process of magnetic nanoparticles and colloids in solution under the influence of magnetic field gradients, which is also known as magnetophoresis, is an essential step in the separation technology used in various biomedical and engineering applications. Many works have demonstrated that in specific situations, separation can be performed easily with the weak magnetic field gradients created by permanent magnets, a process known as low-gradient magnetic separation (LGMS). Due to the level of complexity involved, it is not possible to understand the observed kinetics of LGMS within the classical view of magnetophoresis. Our experimental and theoretical investigations in the last years unravelled the existence of two novel physical effects that speed up the magnetophoresis kinetics and explain the observed feasibility of LGMS. Those two effects are (i) cooperative magnetophoresis (due to the cooperative motion of strongly interacting particles) and (ii) magnetophoresis-induced convection (fluid dynamics instability originating from inhomogeneous magnetic gradients). In this feature article, we present a unified view of magnetophoresis based on the extensive research done on these effects. We present the physical basis of each effect and also propose a classification of magnetophoresis into four distinct regimes. This classification is based on the range of values of two dimensionless quantities, namely, aggregation parameter N* and magnetic Grashof number Grm, which include all of the dependency of LGMS on various physical parameters (such as particle properties, thermodynamic parameters, fluid properties, and magnetic field properties). This analysis provides a holistic view of the classification of transport mechanisms in LGMS, which could be particularly useful in the design of magnetic separators for engineering applications., The authors thank Lluis M. Martinez of Sepmag Systems SL for sharing images of magnetic separators and for invaluable discussions during the last few years about magnetic separation. We also thank Fernando Martinez-Pedrero (UB) for sharing images of his samples. J.L.’s work is financially supported by an LRGS grant from the Ministry of Education Malaysia (project number 67215001). S.S.L. acknowledges the support of UTARRF (project number IPSR/RMC/UTARRF/2019-C2/L04). J.C. acknowledges financial support by Spain’s Ministerio de Ciencia, Innovación y Universidades under grant no. RTI2018-097876-B-C22 (MCIU/AEI/FEDER, UE). J.F. is supported by the Spanish Ministry of Science and Innovation through research grant RTI2018-096273-B-I00 and the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496) awarded to ICMAB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Limbal Stem Cells on Bacterial Nanocellulose Carriers for Ocular Surface Regeneration

  • Anton Sales, Irene
  • Koivusalo, Laura
  • Skottman, Heli
  • Laromaine, Anna
  • Roig Serra, Anna
Limbal stem cells (LSCs) are already used in cell‐based treatments for ocular surface disorders. Clinical translation of LSCs‐based therapies critically depends on the successful delivery, survival, and retention of these therapeutic cells to the desired region. Such a major bottleneck could be overcome by using an appropriate carrier to provide anchoring sites and structural support to LSC culture and transplantation. Bacterial nanocellulose (BNC) is an appealing, yet unexplored, candidate for this application because of its biocompatibility, animal‐free origin and mechanical stability. Here, BNC as a vehicle for human embryonic stem cells‐derived LSC (hESC‐LSC) are investigated. To enhance cell‐biomaterial interactions, a plasma activation followed by a Collagen IV and Laminin coating of the BNC substrates is implemented. This surface functionalization with human extracellular matrix proteins greatly improved the attachment and survival of hESC‐LSC without compromising the flexible, robust and semi‐transparent nature of the BNC. The surface characteristics of the BNC substrates are described and a preliminary ex vivo test in simulated transplantation scenarios is provided. Importantly, it is shown that hESC‐LSC retain their self‐renewal and stemness characteristics up to 21 days on BNC substrates. These results open the door for future research on hESC‐LSC/BNC constructs to treat severe ocular surface pathologies., This collaborative project was mainly funded with an european molecular biology organization short‐term fellowship (ref 8288) awarded to I.A.‐S. and the authors would like to express their gratitude to this institution. Researchers acknowledge financial support from the Spanish Ministry of Science and Innovation through the RTI2018‐096273‐B‐I00 project, the Severo Ochoa Programme for Centres of Excellence in R&D (SEV‐2015‐0496 and CEX2019‐000917‐S) and the Ph.D. scholarship of I.A.‐S. (BE‐2017‐076734) as well as Academy of Finland (326760). The authors are also grateful to Generalitat de Catalunya for the 2017SGR765 and the 2019LLAV00046 projects. Authors also appreciate Miquel Anton for his assistance with photography, the AFM service of ICMAB, the electron microscopy facility of ICN2, and the optical microscope service of UAB. The ICMAB members (I.A.‐S., A.L., and A.R.) participate in the CSIC Interdisciplinary Platform for Sustainable Plastics toward a Circular Economy, SUSPLAST, MICINN: “Research Networks” nanoCARE, (RED2018‐102469‐T) and in the Aerogels COST ACTION (CA 18125). This work was conducted within the Material Science Doctoral Program of the Autonomous University of Barcelona (I.A.‐S.). The authors deeply thank the laboratory staff of Tampere University, especially Outi Melin and Hanna Pekkanen for the production, maintenance and differentiation of the hESCs and hESC‐LSC, and Juha Heikkilä for the help with the plasma equipment. The authors acknowledge the Biocenter Finland (BF) and Tampere Imaging Facility (TIF) for their service., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Soft X-ray Transmission Microscopy on Lithium-Rich Layered-Oxide Cathode Materials

  • Sorrentino, Andrea
  • Simonelli, Laura
  • Kazzazi, Arefehsadat
  • Laszczynski, Nina
  • Birrozzi, Agnese
  • Mullaliu, Angelo
  • Pereiro, Eva
  • Passerini, Stefano
  • Giorgetti, Marco
  • Tonti, Dino
Energy-dependent full field transmission soft X-ray microscopy (TXM) is able to give a full picture at the nanometer scale of the chemical state and spatial distribution of oxygen and other elements relevant for battery materials, providing pixel-by-pixel absorption spectrum. We show different methods to localize chemical inhomogeneities in Li1.2Mn0.56Ni0.16Co0.08O2 particles with and without VOx coating extracted from electrodes at different states of charge. Considering the 3d(Mn,Ni)-2p(O) hybridization, it has been possible to discriminate the chemical state of Mn and Ni in addition to the one of O. Different oxidation states correspond to specific features in the O-K spectra. To localize sample regions with specific compositions we apply two different methods. In the first, the pixel-by-pixel ratios of images collected at different key energies clearly highlight local inhomogeneities. In the second, introduced here for the first time, we directly correlate corresponding pixels of the two images on a xy scatter plot that we call phase map, where we can visualize the distributions as function of thickness as well as absorption artifacts. We can select groups of pixels, and then map regions with similar spectral features. Core-shell distributions of composition are clearly shown in these samples. The coating appears in part to frustrate some of the usual chemical evolution. In addition, we could directly observe several further aspects, such as: distribution of conducting carbon; inhomogeneous state of charge within the electrode; molecular oxygen profiles within a particle. The latter suggests a surface loss with respect to the bulk but an accumulation layer at intermediate depth that could be assigned to retained O2., This research was funded by Spanish Government, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S), and the projects MAT2017-91404-EXP, RTI2018-096273-B-I00 and RTI2018-097753-B-I00 with FEDER cofunding. D.T. participates in the FLOWBAT 2021 platforms promoted by the Spanish National Research Council (CSIC). The HIU authors acknowledge the basic funding from the Helmholtz Association., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Local interactions governing the performance of lithium- and manganese-rich cathodes

  • Ali, Shehab E.
  • Olszewski, Wojciech
  • Sorrentino, Andrea
  • Marini, Carlo
  • Kazzazi, Arefehsadat
  • Laszczynski, Nina
  • Birrozzi, Agnese
  • Mullaliu, Angelo
  • Passerini, Stefano
  • Tonti, Dino
  • Simonelli, Laura
The local structural and electronical transformations occurring along the first charge and discharge cycle of Li- and Mn-rich Li[Li0.2Ni0.16Mn0.56Co0.08]O2 cathode material have been characterized by X-ray absorption spectroscopy at several complementary edges. The irreversible spinel formation, occurring at the expenses of the cycling layered phase during the first charge, is quantified (about 10%) and spatially localized. The local strains induced by the Ni oxidation have been evaluated. They induce the formation of a low spin Mn3+ in the layered structure in parallel to the irreversible formation of the spinel phase in the particles bulk. The charge balance has been quantified for all the elements along the first charging cycle, confirming a reversible oxygen oxidation along the charge. Overall, these quantitative results provide an experimental basis for modeling aimed to control the structure and its evolution, for instance, hindering the spinel formation for the benefit of the material cycle life., This research was supported by the Spanish Government, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S), and the projects MAT2017-91404-EXP, RTI2018-096273-B-I00, and RTI2018-097753-B-I00 with FEDER cofunding. D.T. participates in the FLOWBAT 2021 platforms promoted by the Spanish National Research Council (CSIC). The HIU authors acknowledge the basic funding from the Helmholtz Association., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbons derived from alcohol-treated bacterial cellulose with optimal porosity for LieO2 batteries

  • Wang, Wenhai
  • Khabazian, Siavash
  • Roig Sánchez, Soledad
  • Laromaine, Anna
  • Roig Serra, Anna
  • Tonti, Dino
Porous carbons are important cathode materials for metal-air batteries, but the most usual methods to prepare these porous structures are complex and of high cost. We have prepared porous carbons from bacterial cellulose (BC) hydrogels by a simple water-alcohol solvent exchange before carbonization. Alcohol treatment facilitates looser and more open structures than untreated BC, resulting in porous carbon structures with high surface area, appropriate for electrochemical applications. Used as cathodes in lithium-oxygen batteries, the carbon derived from 1-butanol treated BC has excellent discharge capacity (5.6 mA h cm−2) and good cycle life. This work presents a sustainable, straightforward and fast way to prepare porous carbon materials from BC., This research was supported by the Spanish Government, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (CEX2019-000917-S), the projects MAT2017-91404-EXP and RTI2018-096273-B-I00 and the PhD scholarships of S. R. (BES-2016-077533) with FEDER co-funding. W.W. gratefully acknowledges the support from the China Scholarship Council (CSC No.:201808340076). The authors participate in the SusPlast and FLOWBAT 2021 platforms promoted by the Spanish National Research Council (CSIC) and in the Aerogels COST ACTION (CA 18125). They also acknowledge the Generalitat de Catalunya (2017SGR765 and 2017SGR1687 grants). This work has been performed within the framework of the doctoral program in materials science of UAB (W. W. and S.R–S.), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In vivo soft tissue reinforcement with bacterial nanocellulose

  • Anton Sales, Irene
  • Roig Sánchez, Soledad
  • Traeger, Kamelia
  • Weis, Christine
  • Laromaine, Anna
  • Turon, Pau
  • Roig Serra, Anna
The use of surgical meshes to reinforce damaged internal soft tissues has been instrumental for successful hernia surgery; a highly prevalent condition affecting yearly more than 20 million patients worldwide. Intraperitoneal adhesions between meshes and viscera are one of the most threatening complications, often implying reoperation or side effects such as chronic pain and bowel perforation. Despite recent advances in the optimization of mesh porous structure, incorporation of anti-adherent coatings or new approaches in the mesh fixation systems, clinicians and manufacturers are still pursuing an optimal material to improve the clinical outcomes at a cost-effective ratio. Here, bacterial nanocellulose (BNC), a bio-based polymer, is evaluated as a soft tissue reinforcement material regarding mechanical properties and in vivo anti-adhesive performance. A double-layer BNC laminate proved sufficient to meet the standards of mechanical resistance for abdominal hernia reinforcement meshes. BNC-polypropylene (BNC-PP) composites incorporating a commercial mesh have also been prepared. The in vivo study of implanted BNC patches in a rabbit model demonstrated excellent anti-adherent characteristics of this natural nanofibrous polymer 21-days after implantation and the animals were asymptomatic after the surgery. BNC emerges as a novel and versatile hernioplasty biomaterial with outstanding mechanical and anti-adherent characteristics., Authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the RTI2018-096273-B-I00 project, the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (CEX2019-000917-S) and the Generalitat de Catalunya 2017SGR765 grant. Authors are also grateful for the PhD scholarships of I. A-S. (BE-2017-076734) and S. R-S. (BES-2016-077533) and the 2019LLAV00046 project. The ICMAB members participate in the CSIC Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy, SUSPLAST, and in the Aerogels COST ACTION (CA 18125). This work has been performed within the framework of the doctoral program in materials science of UAB (I. A-S. and S. R-S.). We acknowledge the support by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI) to cover the publication fee., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Interaction between SARS-CoV-2 spike glycoprotein and human skin models: a molecular dynamics study

  • Domingo, Marc
  • Faraudo, Jordi
The possibility of contamination of human skin by infectious virions plays an important role in indirect transmission of respiratory viruses but little is known about the fundamental physico-chemical aspects of the virus-skin interactions. In the case of coronaviruses, the interaction with surfaces (including the skin surface) is mediated by their large glycoprotein spikes that protrude from (and cover) the viral envelope. Here, we perform all atomic simulations between the SARS-CoV-2 spike glycoprotein and human skin models. We consider an "oily" skin covered by sebum and a "clean" skin exposing the stratum corneum. The simulations show that the spike tries to maximize the contacts with stratum corneum lipids, particularly ceramides, with substantial hydrogen bonding. In the case of "oily" skin, the spike is able to retain its structure, orientation and hydration over sebum with little interaction with sebum components. Comparison of these results with our previous simulations of the interaction of SARS-CoV-2 spike with hydrophilic and hydrophobic solid surfaces, suggests that the"soft" or "hard" nature of the surface plays an essential role in the interaction of the spike protein with materials., This work was supported by the Spanish Ministry of Science and Innovation through Grant No. RTI2018-096273-B-I00, the “Severo Ochoa” Grant No.CEX2019-000917-S for Centres of Excellence in R&D awarded to ICMAB and the FPI grant PRE2020- 093689 awarded to M.D. We thank the CESGA supercomputing center for computer time and technical support at the Finisterrae supercomputer. M.D. is enrolled in the Material Sciences PhD program of the Universitat Autonoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Patterning Bacterial Cellulose Films with Iron Oxide Nanoparticles and Magnetic Resonance Imaging Monitoring

  • Mira Cuenca, Cristina
  • Meslier, Thomas
  • Roig Sánchez, Soledad 
  • Laromaine, Anna
  • Roig Serra, Anna
Biomaterials derived from nature can offer sustainable, biomimetic, and biointeractive solutions. Bacterial cellulose (BC) is a natural biopolymer gaining popularity in the medical field due to its biocompatibility, excellent mechanical properties, and animal-free origin. Those attributes, together with its optimal conformability to different surfaces and high water holding capacity, have endorsed the use of BC films in wound healing, tissue engineering, implants, or wearable sensors. The functionalization of the BC films with nanoparticles (NPs) and the spatial control of their disposition in a BC substrate could further boost BC opportunities in those sectors. Here we report on an original method to deposit superparamagnetic iron oxide NPs (SPIONs) in selected areas of a flat BC film (thickness 6 ± 1 μm, roughness 26 ± 3 nm) using a screen-printing process to create ad hoc NPs patterns on the film surface. The ink used for screen-printing consisted of a dense solution of blended BC fibers (BCf, length 14 ± 9 μm) previously coated with SPIONs using a microwave-assisted synthetic route. In addition, we have tested the easy identification of a BC/SPIONs implant inserted in a simulated tissue by magnetic resonance imaging (MRI) as provided by an ex vivo test. The SPIONs in the BC presented an excellent performance as a transverse relaxation (T2) contrast agent. Those functionalized BC films could enlarge their application as bioimplants and be noninvasively monitored for the detection of deformations and adhesions., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the RTI2018-096273-B-I00 project, the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2019-000917-S), and the Ph.D. scholarship of S.R.-S. (BES-2016-077533). The Generalitat de Catalunya via 2017SGR765 and 2019LLAV00046 Grants are also acknowledged. We are also thankful for the short-term scholarships for C.M.-C. (JAEINT20_EX_0933) and T.M. (Eramus+). The authors participate in the CSIC Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy, SUSPLAST, and in the Aerogels COST ACTION (CA 18125). The authors would like to thank Dr. Irene Anton-Sales (ICMAB-CSIC) and Dr. Pau Turon (B.Braun Surgical) for the critical reading of the manuscript., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bio and soft-imprinting lithography on bacterial cellulose films

  • Roig Sánchez, Soledad 
  • Fernández Sánchez, César
  • Laromaine, Anna
  • Roig Serra, Anna
Bacterial cellulose (BC) is a biocompatible polysaccharide produced by bacteria currently used in packaging, cosmetics, or health care. A highly attractive feature of BC is the possibility of patterning the BC pellicle during its biosynthesis, a concept coined as bio-lithography. BC-patterned films have demonstrated improved properties for cellular-guided growth, implant protection, or wound dressing. However, aspects such as the diversity and size of the features patterned, how those features withstand postprocessing steps, or if large areas can be patterned remain unanswered. Gathering knowledge on these characteristics could extend the use of patterned cellulose-based materials in emerging fields such as transient devices, nanogenerators, or microfluidics. Here, we show that bio-lithographed BC films present good-quality micropatterned features for various motifs (wells, pillars, and channels) in a wide range of sizes (from 200 to 5 μm) and areas as large as 70 cm2. Besides, we have studied the fidelity of the motifs and the fiber organization for wet, supercritical, and oven-dried films. When wells and pillars were patterned, the x and y dimensions were faithfully replicated in the wet and dried samples, but only wet and supercritically dried films afforded mold accuracy in the z-direction. In addition, x/z ratio should be carefully considered for obtaining self-standing pillars. Finally, we compared bio-lithography and soft-imprint lithography. In the latter case, fiber alignment was not observed and the depth of the resulting features dramatically decreased; however, this technique allowed us to produce submicron features that remain after the rewetting of the BC films., Authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the RTI2018-096273-B-I00 project, the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (CEX2019-000917-S) and the PhD scholarship of S.R.-S. (BES-2016-077533). The Generalitat de Catalunya projects, 2017SGR765 and 2017SGR1771 are also acknowledged. The authors also express their gratitude to the technical services of ICMAB (SC facilities, SEM, AFM), UAB (microscopy facilities) and ICN2 (electron microscopy). This work used the Spanish ICTS Network MICRONANOFABS, which is partly supported by the Spanish Ministry of Science and Innovation. The authors participate in the CSIC Interdisciplinary Platform for Sustainable Plastics toward a Circular Economy, SUSPLAST and in the Aerogels COST ACTION (CA 18125). The authors very much appreciate the critical revision of A. Mihi (ICMAB) and the stamp provided by his group. This work has been performed within the framework of the doctoral program in materials science of UAB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic Mesoporous Silica Nanorods Loaded with Ceria and Functionalized with Fluorophores for Multimodal Imaging

  • Grzelak, Jan Jacek
  • Gázquez, Jaume
  • Grayston, Alba
  • Teles, Mariana
  • Herranz, Fernando
  • Roher, Nerea
  • Rosell, Anna
  • Roig Serra, Anna
  • Gich, Martí
Multifunctional magnetic nanocomposites based on mesoporous silica have a wide range of potential applications in catalysis, biomedicine, or sensing. Such particles combine responsiveness to external magnetic fields with other functionalities endowed by the agents loaded inside the pores or conjugated to the particle surface. Different applications might benefit from specific particle morphologies. In the case of biomedical applications, mesoporous silica nanospheres have been extensively studied while nanorods, with a more challenging preparation, have attracted much less attention despite the positive impact on the therapeutic performance shown by seminal studies. Here, we report on a sol-gel synthesis of mesoporous rodlike silica particles of two distinct lengths (1.4 and 0.9 μm) and aspect ratios (4.7 and 2.2) using Pluronic P123 as a structure-directing template and rendering ∼1 g of rods per batch. Iron oxide nanoparticles have been synthesized within the pores yielding maghemite (γ-Fe2O3) nanocrystals of elongated shape (∼7 nm × 5 nm) with a [110] preferential orientation along the rod axis and a superparamagnetic character. The performance of the rods as T2-weighted MRI contrast agents has also been confirmed. In a subsequent step, the mesoporous silica rods were loaded with a cerium compound and their surface was functionalized with fluorophores (fluorescamine and Cyanine5) emitting at λ = 525 and 730 nm, respectively, thus highlighting the possibility of multiple imaging modalities. The biocompatibility of the rods was evaluated in vitro in a zebrafish (Danio rerio) liver cell line (ZFL), with results showing that neither long nor short rods with magnetic particles caused cytotoxicity in ZFL cells for concentrations up to 50 μg/ml. We advocate that such nanocomposites can find applications in medical imaging and therapy, where the influence of shape on performance can be also assessed., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the RTI2018-096273-B-I00 project, the ‘Severo Ochoa’ Programme for Centers of Excellence in R&D (CEX2019-000917-S). The Generalitat de Catalunya, project 2017SGR765, is also acknowledged. This research work was performed in the framework of the Nanomedicine CSIC HUB (ref 202180E048).The authors participate in the Aerogels COST ACTION (CA 18125). J.G. received financial support through the “la Caixa” INPhINIT Fellowship Grant for Doctoral Studies at Spanish Research Centers of Excellence (Grant code: LCF/BQ/DI17/11620041), “la Caixa” Banking Foundation (ID100010434), Barcelona, Spain. J.G. was enrolled in the doctoral program in Materials Science at the UAB. M.T. (ref RYC2019-026841-I) has a post-doctoral fellowship “Ramón y Cajal” supported by the “Ministerio de Ciencia e Innovación”, Spanish Government. A. G. has been supported by the fellowship from Instituto de Salud Carlos III with FEDER funds (FI17/00073). A.Rosell and A. G. work takes part within the RETICS-INVICTUS PLUS from Instituto de Salud Carlos III with FEDER funds (RD16/0019/0021). G. Antorrena from the LMA at Universidad de Zaragoza is acknowledged for performing XPS measurements. ICTS-CNME at UCM is also acknowledged for offering access to STEM and expertise. The ICMAB Scientific services of electron microscopy, low temperatures and magnetometry, thermal analysis, and X-ray diffraction have performed measurements for the present work. Nico Dix, Joan Esquius, and Xavi Campos are acknowledged by making possible SAXS measurements at the ICMAB X-ray diffraction service., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Au/TiO2 2D-Photonic Crystals as UV–Visible Photocatalysts for H2 Production

  • Torras, Miquel
  • Molet, Pau
  • Soler, Lluís
  • Llorca, Jordi
  • Roig Serra, Anna
  • Mihi, Agustín
Noble metal decoration of wideband gap semiconductors enables the excitation of surface plasmons in the visible range that upon relaxation generate hot carriers used for catalysis. However, this strategy leads to photocatalytic conversion efficiencies that are still low. Here, a light-trapping scheme is used to amplify the light-harvesting efficiency of the TiO2 semiconductor beyond the UV region by coupling a 2D-photonic crystal to Au decorated titania. This approach is easily scalable using soft nanoimprinting lithography to prepare Au/TiO2 2D-photonic photocatalysts. In a first process, gold nanoparticles (Au NPs) are in situ infiltrated in the superficial 50 nm of a mesoporous titania (mTiO2) scaffold patterned with the photonic structure, while in a second one 2D-photonic crystals with a homogeneous volume distribution of the Au colloids are achieved. The dependence of the optical properties of the photonic crystals on the lattice parameter, geometry, and metal loading is presented through extinction measurements and analyzed through simulations. The improved photocatalytic performance of the substrates is tested for hydrogen production where a maximum of 8.5 mmol gcat−1 h−1 of H2 is recorded and attributed to photonic–plasmonic effects. These results may open new avenues in solar harvesting for hydrogen production using photonic crystals as photocatalysts., M.T. and P.M. contributed equally to this work. This research received funding from the Spanish Ministry of Science, Innovation and Universities, through the RTI2018-096273-B-I00, RTI2018-093996-B-C31, and PID2019-106860GB-I00 projects, the “Severo Ochoa” Programme for Centers of Excellence in R&D grant FUNFUTURE (CEX2019-000917-S), and the Generalitat de Catalunya (2017SGR765 and 2017SGR128 grants). The Spanish Ministry of Education, Culture and Sport, is funding the FPU Fellow of MT (FPU16/05452). P.M. acknowledges financial support from an FPI contract (2017) of the MICINN (Spain) cofounded by the ESF and the UAB. M.T. is enrolled in the Materials Science Ph.D. Program of the UAB (Universitat Autònoma de Barcelona). L.S. is grateful to MICINN Ramon y Cajal program for individual fellowship grant agreement RYC2019-026704-I. J.L. is a Serra Húnter Fellow and is grateful to ICREA Academia Program., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

One-Step Biosynthesis of Soft Magnetic Bacterial Cellulose Spheres with Localized Nanoparticle Functionalization

  • Roig Sánchez, Soledad 
  • Torrecilla, Oriol
  • Floriach Clark, Jordi
  • Parets, Sebastià
  • Levkin, Pavel A
  • Roig Serra, Anna
  • Laromaine, Anna
Actuated structures are becoming relevant in medical fields; however, they call for flexible/soft-base materials that comply with biological tissues and can be synthesized in simple fabrication steps. In this work, we extend the palette of techniques to afford soft, actuable spherical structures taking advantage of the biosynthesis process of bacterial cellulose. Bacterial cellulose spheres (BCS) with localized magnetic nanoparticles (NPs) have been biosynthesized using two different one-pot processes: in agitation and on hydrophobic surface-supported static culture, achieving core-shell or hollow spheres, respectively. Magnetic actuability is conferred by superparamagnetic iron oxide NPs (SPIONs), and their location within the structure was finely tuned with high precision. The size, structure, flexibility and magnetic response of the spheres have been characterized. In addition, the versatility of the methodology allows us to produce actuated spherical structures adding other NPs (Au and Pt) in specific locations, creating Janus structures. The combination of Pt NPs and SPIONs provides moving composite structures driven both by a magnetic field and a H2O2 oxidation reaction. Janus Pt/SPIONs increased by five times the directionality and movement of these structures in comparison to the controls., Authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the RTI2018-096273-B-I00 project, the “Severo Ochoa” Programme for the Centres of Excellence in R&D (CEX2019-000917-S), and the PhD scholarship of S.R.-S (BES-2016-077533). The Generalitat de Catalunya project 2017SGR765 is also acknowledged. The authors also express their gratitude to the technical services of ICMAB-CSIC (electron microscopy, magnetometry and Nanoquim facilities) and CRAG (microscopy facilities). The authors participate in the CSIC Interdisciplinary Platform for Sustainable Plastics toward a Circular Economy, SUSPLAST, the EPNOE Association, Ministerio de Ciencia e Innovación, Acciones de dinamización Redes de Investigación RED2018-102469-T and in the Aerogels COST ACTION (CA 18125)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Neuroligin-mediated neurodevelopmental defects are induced by mitochondrial dysfunction and prevented by lutein in C. elegans

  • Maglioni, Silvia
  • Schiavi, Alfonso
  • Melcher, Marlen
  • Brinkmann, Vanessa
  • Luo, Zhongrui
  • Laromaine, Anna
  • Raimundo, Nuno
  • Meyer, Joel N.
  • Distelmaier, Felix
  • Ventura, Natascia
Complex-I-deficiency represents the most frequent pathogenetic cause of human mitochondriopathies. Therapeutic options for these neurodevelopmental life-threating disorders do not exist, partly due to the scarcity of appropriate model systems to study them. Caenorhabditis elegans is a genetically tractable model organism widely used to investigate neuronal pathologies. Here, we generate C. elegans models for mitochondriopathies and show that depletion of complex I subunits recapitulates biochemical, cellular and neurodevelopmental aspects of the human diseases. We exploit two models, nuo-5/NDUFS1- and lpd-5/NDUFS4-depleted animals, for a suppressor screening that identifies lutein for its ability to rescue animals' neurodevelopmental deficits. We uncover overexpression of synaptic neuroligin as an evolutionarily conserved consequence of mitochondrial dysfunction, which we find to mediate an early cholinergic defect in C. elegans. We show lutein exerts its beneficial effects by restoring neuroligin expression independently from its antioxidant activity, thus pointing to a possible novel pathogenetic target for the human disease., We would like to thank Professor Tom Johnson at the University of Colorado Boulder and Professor Shane Rea (now at University of Washington) for making possible theinitial customized HMAD RNAi screening. We also would like to thank Alison Kell, Jenny Cho, and Alessandro Torgovnick for technical help with RNAi screen and lifespan; Professor Proksch at the Heinrich Heine University of Duesseldorf for the compound library used in the suppressor screen; Núria Benseny-Cases at MIRAS beamline in ALBA Synchrotron Light Source, Cerdanyola del Vallès in Barcelona, and Genis Rabost for technical assistance with FTIR measurements and analysis; Anthony Luz and Ian Ryde at Duke University for assistance with Seahorse XFe24 analysis and DNA damage assays respectively; Dirk Schwitters for qPCR on brains from WT and NDUFS4−/− mice. Finally, we thank the Caenorhabditis Genetics Center (funded by the National Institutes of Health Office of Research Infrastructure Programs: P40OD010440) as well as the National Bioresource Project (NBRP) for C. elegans strains and Professors Sieburth, Kaplan and Calahorro for providing additional mutants used in this work. The Wood-Whelan fellowship covered Silvia Maglioni costs to visit Joel Meyer Laboratory. This work was possible thanks to financial support from the German Research Foundation (DFG grants VE663-3/1 and VE663/8-1), the Federal Ministry of Education and Research (JPI-HDHL, Grant no. 01EA1602), and the Heinrich Heine University of Duesseldorf (Strategic Research Funding 2014) to NV; the National Institutes of Health (P42ES010356) to J.N.M., a fellowship from the China Scholarship Council (CSC201607030005) to Z.L.; the Spanish Ministry of Science, Innovation and Universities (RTI2018-096273-B-I00) and the ‘Severo Ochoa’ Programme for Centers of Excellence in R&D (SEV-2015-0496) to A.L.; the ERC Stg 337327 MitoPexLyso to N.R., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-Step Electrochemical Liquid-Liquid-Solid-Assisted Growth of Ge-Sn Nanostructures as a Long-Life Anode Material with Boosted Areal Capacity

  • Khabazian, Siavash
  • Sanjabi, Sohrab
  • Campo, Francisco Javier del
  • Fernández Martín, Eduardo
  • Tonti, Dino
A single-step electrochemical liquid-liquid-solid (ec-LLS) deposition route is developed for growing nanowire-based Ge-Sn nanostructures with tailored morphologies and compositions. Composite films, submicron fibers, nanowires, and also three-dimensional (3D) hierarchical structures are fabricated in the same electrolyte, simply by varying the electrodeposition current density. COMSOL simulations indicate that the current density is able to generate sufficient Joule heating to activate the ec-LLS growth mode. A concomitant reduction of Ge and Sn ions during Sn-doped Ge nanowire growth results in the formation of multicomponent heterostructures comprising non-equilibrium GexSn1-x, pure Sn, and Sn-rich amorphous phases. The proposed deposition technique enables the fabrication of high mass loading electrodes with enhanced Li storage properties. In particular, a 3D hierarchical structure composed of 38 wt % Ge delivers a specific capacity of 938 mA h g-1 after 400 cycles, corresponding to a high areal capacity of 4.95 mA h cm-2. We believe that the present study could be considered as a low-cost procedure for the industrial fabrication of anode materials for high-performance Li-ion battery applications., Spanish MICINN funded this work under grants MAT2017-91404-EXP, RTI2018-096273-B-I00, and RTI2018-097753-B-I00 with FEDER cofunding and through the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2019-000917-S), and a grant was provided by Iranian Ministry of Science, Research, and Technology., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Facile preparation of glycine-based mesoporous graphitic carbons with embedded cobalt nanoparticles

  • Wang, Wenhai
  • Tesio, Alvaro Y.
  • Olivares-Marín, Mara
  • Gómez Romero, Facundo
  • Tonti, Dino
Part of a collection: Composites & nanocomposites, A simple route has been developed for the preparation of mesoporous graphitic carbons with embedded cobalt nanoparticles just using glycine as a nitrogen source, cobalt nitrate and distilled water. After heating the mixture to 300 °C under magnetic stirring, a dry solid product was obtained, which was then carbonized at 900 ºC under argon atmosphere. Changing the glycine/Co molar ratio allowed controlling the size of the cobalt particles and their dispersion in the carbon matrix, the porosity of the carbon and its graphitic character. The carbon–metal composites obtained were tested as oxygen cathodes in Li–O batteries. Cells assembled exhibited a full discharge capacity up to 2.19 mAh cm at a current of 0.05 mA cm and over 39 cycles at a cutoff capacity of 0.5 mAh cm. This work provides a green, feasible and simple way to prepare mesoporous graphitic carbons with embedded cobalt nanoparticles without involving templates. Graphical abstract: [Figure not available: see fulltext.]., This research was supported by the Spanish Ministry of Science and Innovation, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (CEX2019-000917-S), the projects MAT2017-91404-EXP, RTI2018-096273-B-I00, RTI2018-3097753-B-I00, with FEDER co-funding, the CSIC program for the Spanish Recovery, Transformation and Resilience Plan “Plataforma Temática Interdisciplinar Transición Energética Sostenible+ (PTI-TRANSENER +)” funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094. The authors also acknowledge the Generalitat de Catalunya (2017SGR1687). W.W. gratefully acknowledges the support from the China Scholarship Council (CSC No.:201808340076). This work has been performed within the framework of the doctoral program in materials science of UAB (W. W.).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoarchitectonics of bacterial cellulose with nickel-phosphorous alloy as a binder-free electrode for efficient hydrogen evolution reaction in neutral solution

  • Wang, Wenhai
  • Khabazian, Siavash
  • Casas Papiol, Marina
  • Roig Sánchez, Soledad 
  • Laromaine, Anna
  • Roig Serra, Anna
  • Tonti, Dino
Developing low-cost and efficient electrodes for hydrogen evolution reaction (HER) under neutral electrolytes remains an unattained milestone. We report a highly performing binder-free electrode through electroless deposition of Ni–P nanoparticles on bacterial cellulose (BC). Not needing carbonization to provide the electric conductivity, BC can maintain its excellent mechanical properties and thin fiber microstructure. The nanometric cellulose fibers facilitate the formation of small Ni–P nanoparticles, leading to more catalytic active sites. The obtained Ni–P/BC electrode presents remarkable HER activity with an overpotential of only 161 mV at 10 mA cm−2 and a low Tafel slope (141 mV dec−1) in 1 M potassium phosphate-buffered saline (pH = 7) electrolyte. Besides, Ni–P/BC also exhibits good stability for 24 h at 10 mA cm−2. This binder-free, low-cost, and easily fabricated electrode holds excellent promise for HER applications in benign neutral environments., This research was funded by the Spanish Government, through the "Severo Ochoa " Programme for Centers of Excellence in R&D (FUNFUTURE, CEX2019-000917-S), the projects RTI2018-096273-B-I00, RTI2018-097753-B-I00, with FEDER cofunding, and by the CSIC program for the Spanish Recovery, Transformation and Resilience Plan "Interdisciplinary Platform for Sustainable Energy Transitionthorn (PTI-TRANSENERthorn)" and the "Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy (PTI-SUPLAST)" funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094. W.W. is grateful for the support from the China Scholarship Council (CSC No.:201808340076). The authors also participate in the FLOWBAT 2021 platform promoted by CSIC, the EPNOE Association and Aerogels COST ACTION (CA 18125). This work has been performed within the framework of the doctoral program in materials science at UAB (W. W. and S.R-S.), With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly Aligned Bacterial Nanocellulose Films Obtained During Static Biosynthesis in a Reproducible and Straightforward Approach

  • Murugarren, Nerea
  • Roig Sánchez, Soledad 
  • Anton Sales, Irene
  • Malandain, Nanthilde
  • Xu, Kai
  • Solano, Eduardo
  • Reparaz, J. Sebastian
  • Laromaine, Anna
Bacterial nanocellulose (BNC) is usually produced as randomly-organized highly pure cellulose nanofibers films. Its high water-holding capacity, porosity, mechanical strength, and biocompatibility make it unique. Ordered structures are found in nature and the properties appearing upon aligning polymers fibers inspire everyone to achieve highly aligned BNC (A-BNC) films. This work takes advantage of natural bacteria biosynthesis in a reproducible and straightforward approach. Bacteria confined and statically incubated biosynthesized BNC nanofibers in a single direction without entanglement. The obtained film is highly oriented within the total volume confirmed by polarization-resolved second-harmonic generation signal and Small Angle X-ray Scattering. The biosynthesis approach is improved by reusing the bacterial substrates to obtain A-BNC reproducibly and repeatedly. The suitability of A-BNC as cell carriers is confirmed by adhering to and growing fibroblasts in the substrate. Finally, the thermal conductivity is evaluated by two independent approaches, i.e., using the well-known 3ω-method and a recently developed contactless thermoreflectance approach, confirming a thermal conductivity of 1.63 W mK-1 in the direction of the aligned fibers versus 0.3 W mK-1 perpendicularly. The fivefold increase in thermal conductivity of BNC in the alignment direction forecasts the potential of BNC-based devices outperforming some other natural polymer and synthetic materials., Authors acknowledge the critical reading of Prof. Anna Roig, and the discussions of Dr. Martí Gich and Dr. Mariano Campoy. The also acknowledge the funding from: RTI2018-096273-B-I00 and PID2021-122645O-BI00 funded by MCIN/AEI//10.13039/501100011033/FEDER “Una manera de hacer Europa,” PID2019-104228RB-I00 funded by MCIN/AEI/10.13039/501100011033, the Generalitat de Catalunya (2017SGR765), the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496 and CEX2019-000917-S (FUNFUTURE)), and Grant No. PID2020-119777GB-I00 (THERM2MAIN). SAXS experiments were performed at NCD-SWEET beamline at ALBA synchrotron (Cerdanyola del Vallès, Spain) with the collaboration of ALBA staff. PSHG imaging was performed at the SLN Research Facility, Dr. Pablo Loza-Alvarez, Institute of Photonic Sciences (ICFO) (Castelldefells, Spain). Cell culture was performed at the Cell Culture facility of the University Autonomous of Barcelona (SCAC-UAB). The authors acknowledge the use of Biorender.com. Nanthilde Malandain (Ph.D. scholarship PRE2019-089754) is enrolled in the Ph.D. program of Biotechnology of the UAB., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

One-step double network hydrogels of photocurable monomers and bacterial cellulose fibers

  • Roig Sánchez, Soledad 
  • Kam, Doron
  • Malandain, Nanthilde
  • Sachyani-Keneth, Ela
  • Shoseyov, Oded
  • Magdassi, Shlomo
  • Laromaine, Anna
  • Roig Serra, Anna
Soft-tissue replacements are challenging due to the stringent compliance requirements for the implanted materials in terms of biocompatibility, durability, high wear resistance, low friction, and water content. Acrylate hydrogels are worth considering as soft tissue implants as they can be photocurable and sustain customized shapes through 3D bioprinting. However, acrylate-based hydrogels present weak mechanical properties and significant dimensional changes when immersed in liquids. To address these obstacles, we fabricated double network (DN) hydrogels composed of polyacrylic acid (PAA) and bacterial cellulose nanofibers (BCNFs) by one fast UV photopolymerization step. BCNFs/PAA hydrogels with a 0.5 wt% BCNFs content present an increased stiffness and a lower, non-pH-dependent swelling than PAA hydrogels or PAA hydrogels with cellulose nanocrystals. Besides, BCNFs/PAA hydrogels are biocompatible and can be frozen/thawed. Those characteristics endorse these hybrid hydrogels as potential candidates for vascular and cartilage tissue implants., This research was supported by the Spanish Ministry of Science and Innovation through the RTI2018-096273-B-I00 and PID2021-122645OB-100 projects, the ‘Severo Ochoa’ Programme for Center of Excellence in R&D (CEX2019-000917), the Generalitat de Catalunya (2017SGR765 grant), and partially by the Ministry of Science Technology and Space of Israel (3-15638). N.M. acknowledges the Ph.D. scholarship (PRE2019-089754) in the framework of the Biotechnology Ph.D. program of the UAB. S.R-S., N.M., A.L. and A.R. participate in the Spanish National Research Council (CSIC) interdisciplinary platform for sustainable plastics toward a circular economy (SusPlast) and in the Aerogels COST ACTION (CA 18125), EPNOE network and Red Nanocare RED2018-102469-T. Finally, the authors want to express their gratitude for the technical services of ICMAB and ICN2 (electron microscopy)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comment on "Nanoscale Wetting of Crystalline Cellulose"

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ratiometric Nanothermometer Based on a Radical Excimer for In Vivo Sensing

  • Blasi, Davide
  • Gonzalez Pato, Nerea 
  • Rodríguez Rodríguez, Xavier
  • Díez Zabala, Íñigo
  • Srinivasan, Sumithra Y.
  • Camarero, Núria
  • Esquivias, Oriol
  • Roldán, Mònica
  • Guasch, Judit
  • Laromaine, Anna
  • Gorostiza, Pau
  • Veciana, Jaume
  • Ratera, Immaculada
Ratiometric fluorescent nanothermometers with near-infrared emission play an important role in in vivo sensing since they can be used as intracellular thermal sensing probes with high spatial resolution and high sensitivity, to investigate cellular functions of interest in diagnosis and therapy, where current approaches are not effective. Herein, the temperature-dependent fluorescence of organic nanoparticles is designed, synthesized, and studied based on the dual emission, generated by monomer and excimer species, of the tris(2,4,6-trichlorophenyl)methyl radical (TTM) doping organic nanoparticles (TTMd-ONPs), made of optically neutral tris(2,4,6-trichlorophenyl)methane (TTM-αH), acting as a matrix. The excimer emission intensity of TTMd-ONPs decreases with increasing temperatures whereas the monomer emission is almost independent and can be used as an internal reference. TTMd-ONPs show a great temperature sensitivity (3.4% K-1 at 328 K) and a wide temperature response at ambient conditions with excellent reversibility and high colloidal stability. In addition, TTMd-ONPs are not cytotoxic and their ratiometric outputs are unaffected by changes in the environment. Individual TTMd-ONPs are able to sense temperature changes at the nano-microscale. In vivo thermometry experiments in Caenorhabditis elegans (C. elegans) worms show that TTMd-ONPs can locally monitor internal body temperature changes with spatio-temporal resolution and high sensitivity, offering multiple applications in the biological nanothermometry field., D.B. and N.G.-P. contributed equally to this work. The authors are grateful for the financial support received from the Spanish Government (PID2020-115296RA-I00, PID2019-105622RB-I00, PDI2021-122645OB-I00, RTI2018-096273-B-I00 and PID2019-111493RB-I00) funded by MICIN and the “Ramón y Cajal” program (RYC-2017-22614), the Generalitat de Catalunya (SGR-918, 2017SGR765, SGR Cat 2021-00438, 2017-SGR-1442, and 2021-SGR-1410, 2021-SGR-00446), and the Networking Research Center on Bioengineering, Biomaterials, and Nanomedicine (CIBER-BBN). DB gratefully acknoledges the REFIN (Return for Future Innovation) action for funding, an ininitiative co - funded by European Union through the POR Puglia 2014 - 2020 (ID grant: 2455F798). This research was also supported by the European Union's Horizon 2020 research and innovation program H2020-MSCA-COFUND-2016 (DOC-FAM, grant agreement Nr. 754397), Human Brain Project WaveScaES (SGA2-785907 and SGA3-945539), DEEPER (ICT36-2020-101016787), and the Marie Skłodowka-Curie grant agreement Nr. 101007804 (Micro4Nano). Support from Fundaluce and CaixaHealth (ID 100010434) are also acknowledged. The work was supported as well by the Max Planck Society through the Max Planck Partner Group “Dynamic Biomimetics for Cancer Immunotherapy” in collaboration with the Max Planck for Medical Research (Heidelberg, Germany). ICMAB-CSIC acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D (FUNFUTURE, CEX2019-000917-S). IBEC acknowledges support from the CERCA programme of AGAUR/Generalitat de Catalunya and the Severo Ochoa Programme. This work had been developed inside the “Biochemistry, Molecular Biology and Biomedicine” and “Materials Science” Ph.D. programs of UAB. Nerea Gonzalez-Pato acknowledges the financial support from the FPU fellowship (FPU17/02551) from the Spanish Ministry., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High performance N-doped carbon nanosheet/MnO2 cathode derived from bacterial cellulose for aqueous Zn-ion batteries

  • Wang, Wenhai
  • Black, Ashley P.
  • Liu, Cheng
  • Martin-Diaconescu, Vlad
  • Simonelli, Laura
  • Tonti, Dino
Rechargeable aqueous Zn-ion batteries (ZIBs) have obtained extensive attention owing to their high safety, low-cost, environmental friendliness and high energy density. Nevertheless, developing suitable cathode materials remains challenging due to requirements for appropriate microstructure. We present a porous N-doped carbon nanosheet/MnO2 (NCS/MnO2) derived from bacterial cellulose (BC) by a simple route. BC chunks were soaked in urea solution and then carbonized under Ar flow at 900 °C. N-doped carbon nanosheets were obtained and MnO2 was added by reaction with NaMnO4. Benefiting from both the conductivity and porosity of the NCS support, the NCS/MnO2 composite delivers a high capacity and long cycling stability (114 mA h g−1 at 2 A g−1 after 1800 cycles). The electrode reaction mechanism was further investigated and the MnO2 dissolution/deposition mechanism was confirmed, with a critical role of zinc sulfate hydroxide (ZSH) to assist the deposition of MnO2, This research was funded by the Spanish Agency for Research (AEI) with ERDF cofunding, through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE, CEX2019-000917-S), the projects RTI2018-096273-B-I00, PID2021-124681OB-I00, and TED2021-132707B-I00. This research has been partially developed within the CSIC Interdisciplinary Thematic Platform (PTI+) Transici´on Energ´etica Sostenible+ (PTI-TRANSENER+) as part of the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094. W. W. and C. L. are grateful for the support from the China Scholarship Council (CSC No.: 201808340076 and 202106370079). This work has been performed within the framework of the doctoral program in materials science of UAB (W. W. and C. L.). XAS experiments were performed at CLAESS beamline of ALBA Synchrotron with the collaboration of ALBA staff., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Multisystemic Approach Revealed Aminated Polystyrene Nanoparticles-Induced Neurotoxicity

  • Schröter, Laura
  • Jentsch, Lena
  • Maglioni, Silvia
  • Muñoz Juan, Amanda
  • Wahle, Tina
  • Limke, Annette
  • Mikecz, Anna von
  • Laromaine, Anna
  • Ventura, Natascia
Exposure to plastic nanoparticles has dramatically increased in the last 50 years, and there is evidence that plastic nanoparticles can be absorbed by organisms and cross the blood-brain-barrier (BBB). However, their toxic effects, especially on the nervous system, have not yet been extensively investigated, and most of the knowledge is based on studies using different conditions and systems, thus hard to compare. In this work, physicochemical properties of non-modified polystyrene (PS) and amine-functionalized PS (PS-NH2 ) nanoparticles are initially characterized. Advantage of a multisystemic approach is then taken to compare plastic nanoparticles effects in vitro, through cytotoxic readouts in mammalian cell culture, and in vivo, through behavioral readouts in the nematode Caenorhabditis elegans (C. elegans), a powerful 3R-complying model organism for toxicology studies. In vitro experiments in neuroblastoma cells indicate a specific cytotoxic effect of PS-NH2 particles, including a decreased neuronal differentiation and an increased Amyloid β (Aβ) secretion, a sensitive readout correlating with Alzheimer's disease pathology. In parallel, only in vivo treatments with PS-NH2 particles affect C. elegans development, decrease lifespan, and reveal higher sensitivity of animals expressing human Aβ compared to wild-type animals. In summary, the multisystemic approach discloses a neurotoxic effect induced by aminated polystyrene nanoparticles., The authors would like to thank Dr. Mathias Busch for initial help and support with particles; Dr. Roel Schins for provision of materials and careful reading of the manuscript; Dr. Nadine Teichweyde and Dr. Tamara Hornstein for technical assistance regarding flow cytometry; and Dr. Alfonso Schiavi for microscopy assistance. The authors also would like to thank the Caenorhabditis Genetics Center (funded by the National Institutes of Health Office of Research Infrastructure Programs: P40OD010440) as well as the National Bioresource Project (NBRP) for C. elegans strains. The authors would like to acknowledge financial support from the Jürgen Manchot foundation (Ph.D. scholarship to LS) and from the German Research Foundation (DFG grant VE663-6/1 to NV). A.L. and A.M.J. acknowledge the support by the Spanish Ministry of Science and Innovation through the RTI2018-096273-B-I00 and PID2021-122645OB-100 projects, the “Severo Ochoa” Programme for Center of Excellence in R&D (CEX2019-000917), and the Generalitat de Catalunya (2017SGR765 grant). A.M.J. acknowledges the Ph.D. scholarship (FPU18/05190) in the framework of the Biotechnology Ph.D. program of the UAB. A.M.J. and A.L. participate in the Spanish National Research Council (CSIC) interdisciplinary platform for sustainable plastics toward a circular economy (SusPlast) and in the Aerogels COST ACTION (CA 18125), EPNOE network, Conexión Nanomedicina del CSIC, and Red Nanocare 2.0. Open access funding enabled and organized by Projekt DEAL., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring the Role of Metal in the Biointeraction of Metallacarboranes with C. elegans Embryos

  • Muñoz Juan, Amanda
  • Nuez Martínez, Miquel
  • Laromaine, Anna
  • Viñas, Clara
Cobaltabis(dicarbollides), ferrabis(dicarbollide), and their halogenated derivatives are the most studied metallacarboranes with great medical potential. These versatile compounds and their iodinated derivatives can be used in chemotherapy, radiotherapy, particle therapy, and bioimaging when isotopes are used. These metallacarboranes have been evaluated in vitro and recently in vivo with complex animal models. Lately, these studies have been complemented using the invertebrate Caenorhabditis elegans (C. elegans), a nematode largely used in toxicology. When evaluated at the L4 stage, cobaltabis(dicarbollides), ([o-COSAN]- and [8,8'-I2 -o-COSAN]- ), exhibited a higher mean lethal dose (LD50 ) than ferrabis(dicarbollides) ([o-FESAN]- and [8,8'-I2 -o-FESAN]- ). In this work, we used the C. elegans embryos since they are a complex biological barrier with concentric layers of polysaccharides and proteins that protect them from the environment. We assessed if the metal atom changes their biointeraction with the C. elegans embryos. First, we assessed the effects on embryo development for metallacarboranes and their di-iodinated derivatives. We observed changes in color and in their surface structure. An exhaustive physicochemical characterization was performed to understand better this interaction, revealing a stronger interaction of ferrabis(dicarbollide) compounds with C. elegans embryos than the cobaltabis(dicarbollide) molecules. Unveiling the biological interaction of these compounds is of great interest for their future biomedical applications., TOC and Fig were created using Biorender.com. This research was supported by the Spanish Ministry of Science and Innovation through the CTQ2016-75150-R, RTI2018-096273-B−I00 and PID2021-122645OB-100 projects, the ′Severo Ochoa′ Programme for Center of Excellence in R&D (CEX2019-000917), the Generalitat de Catalunya (2017SGR765 and 2017/SGR/1720 projects). A.M.J. acknowledges the Ph.D. scholarship (FPU18/05190) in the framework of the Biotechnology Ph.D. program of the UAB. M.N−M. acknowledges the FPI Ph.D. scholarship BES-2017-080585, in the framework of the project CTQ2016-75150-R. A.M.J. and A.L. participate in the Spanish National Research Council (CSIC) interdisciplinary platform for sustainable plastics toward a circular economy (SusPlast) and in the Aerogels COST ACTION (CA 18125), EPNOE network, Conexión Nanomedicina - CSIC, and Red Nanocare 2.0., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Caenorhabditis elegans endorse bacterial nanocellulose fibers as functional dietary Fiber reducing lipid markers

  • Muñoz Juan, Amanda
  • Assié, Adrien
  • Esteve Codina, Anna
  • Gut, Marta
  • Benseny Cases, Núria
  • Samuel, Buck S.
  • Dalfó, Esther
  • Laromaine, Anna
Bacterial nanocellulose (BNC) is a promising dietary fiber with potential as a functional food additive. We evaluated BNC fibers (BNCf) in the Caenorhabditis elegans model to obtain insight into the BNCf's biointeraction with its gastrointestinal tract while reducing the variables of higher complex animals. BNCf were uptaken and excreted by worms without crossing the intestinal barrier, confirming its biosafety regarding survival rate, reproduction, and aging for concentrations up to 34 μg/ml BNCf. However, a slight decrease in the worms' length was detected. A possible nutrient shortage or stress produced by BNCf was discarded by measuring stress and chemotactic response pathways. Besides, we detected a lipid-lowering effect of BNCf in N2 C. elegans in normal and high-caloric diets. Oxidative damage was computed in N2 worms and Rac1/ced-10 mutants. The GTPase Rac1 is involved in neurological diseases, where its dysregulation enhances ROS production and neuronal damage. BNCf reduced the lipid oxidative markers produced by ROS species in this worm strain. Finally, we detected that BNCf activated the genetic expression of the immunological response and lipid catabolic process. These results strengthen the use of BNCf as a functional dietary fiber and encourage the potential treatment of neurological disease by modulating diet., Bredeck G. started the project with the initial evaluation of BNC using C. elegans as an animal model, and we thank him for sharing data and protocols. We also thank Malandain, N. for working together to prepare BNCf for FE-SEM analysis. SR-lFTIR experiments were performed at MIRAS beamline at ALBA Synchrotron with the collaboration of ALBA staff. The authors would like to thank the CNAG for assistance with RNAseq data analysis. TOC and Fig. 6D were created by Biorender.com. This research was supported by the Spanish Ministry of Science and Innovation through the RTI2018-096273-B-I00 and PID2021-122645OB-100 projects, ‘Severo Ochoa’ Programme for Center of Excellence in R&D (CEX2019-000917), the Generalitat de Catalunya (2017SGR765 grant). A.M.J. acknowledges the Ph.D. scholarship (FPU18/05190) in the framework of the Biotechnology Ph.D. program of the UAB. A.M.J. and A.L. participate in the Spanish National Research Council (CSIC) interdisciplinary platform for sustainable plastics towards a circular economy (SusPlast) and in the Aerogels COST ACTION (CA 18125), EPNOE network, Conexión Nanomedicina del CSIC, and Red Nanocare 2.0. Finally, the authors want to express their gratitude for the technical services of ICMAB-CSIC and ICN2., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Caenorhabditis elegans RAC1/ced-10 mutants as a new animal model to study very early stages of Parkinson's disease

  • Muñoz Juan, Amanda
  • Benseny-Cases, Nuria
  • Guha, Sanjib
  • Barba, Ignasi
  • Caldwell, Kim A.
  • Caldwell, Guy A.
  • Agulló, L
  • Yuste, V J
  • Laromaine, Anna
  • Dalfó, Esther
Patients with Parkinson's disease (PD) display non-motor symptoms arising prior to the appearance of motor signs and before a clear diagnosis. Motor and non-motor symptoms correlate with progressive deposition of the protein alpha-synuclein (Asyn) both within and outside of the central nervous system, and its accumulation parallels neurodegeneration. The genome of Caenorhabditis elegans does not encode a homolog of Asyn, thus rendering this nematode an invaluable system with which to investigate PD-related mechanisms in the absence of interference from endogenous Asyn aggregation. CED-10 is the nematode homolog of human RAC1, a small GTPase needed to maintain the function and survival of dopaminergic neurons against human Asyn-induced toxicity in C. elegans. Here, we introduce C. elegans RAC1/ced-10 mutants as a predictive tool to investigate early PD symptoms before neurodegeneration occurs. Deep phenotyping of these animals reveals that, early in development, they displayed altered defecation cycles, GABAergic abnormalities and an increased oxidation index. Moreover, they exhibited altered lipid metabolism evidenced by the accumulation of lipid droplets. Lipidomic fingerprinting indicates that phosphatidylcholine and sphingomyelin, but not phosphatidylethanolamine or phosphatidylserine, were elevated in RAC1/ced-10 mutant nematodes. These collective characteristics reflect the non-motor dysfunction, GABAergic neurotransmission defects, upregulation of stress response mechanisms, and metabolic changes associated with early-onset PD. Thus, we put forward an easy-to-manipulate preclinical animal model to deepen our understanding of early-stage PD and accelerate the translational path for therapeutic target discovery., We thank Cristina Alonso, from OWL metabolomics (https://owlmetabolomics.com) for technical assistance. The genetic strain BR3579 was kindly provided by Dr Ralf Baumeister (Albert-Ludwing University, Freiburg/Brisgau, Germany). The construct Pced-10::CFP::CED-10 was a generous gift provided by Erik Lundquist (University of Kansas, Lawrence, KS, USA). SR-lFTIR experiments were performed at MIRAS beamline at ALBA Synchrotron with the collaboration of ALBA staff. Fig. 1, Fig. 3 and Supplementary Fig. S1 were created using Biorender.com. Amanda Muñoz and Anna Laromaine. participate in the Spanish National Research Council (CSIC) interdisciplinary platform for sustainable plastics toward a circular economy (SusPlast) and in the Aerogels COST ACTION (CA 18125), EPNOE network, Conexión Nanomedicina del CSIC, and Red Nanocare 2.0., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Chitin Builder: a VMD tool for the generation of structures of chitin molecular crystals for atomistic simulations

  • Malaspina, David C.
  • Faraudo, Jordi
Chitin is the second most abundant organic material in nature after cellulose and its study is now of great interest in the field of biocompatible and eco-friendly materials. Computational studies of natural polymers such as cellulose and chitin are often hindered by the practical difficulties in generating structures suitable for the simulations. This has motivated the recent introduction of a cellulose builder tool that generates coordinate, structure and topology files for atomistic simulations of cellulose crystal polymorphs. Here we present an analogous tool for chitin, the Chitin Builder tool, a program that enhances the Visual Molecular Dynamics (VMD) environment with the ability to generate coordinate and structure files of chitin organic crystals. The program generates Cartesian coordinates and atomic connectivity and structure files for crystalline structures of chitin polymorphs 𝛼 and 𝛽. Crystal structures of any size with or without bonds in the periodic directions can be easily built. The resulting structure is automatically saved in Protein Data Bank (PDB) and Protein Structure Format (PSF) format (used by well-known simulation packages such as NAMD) and it can be easily converted to many other file formats using VMD build-in features., We acknowledge financial support from the Spanish Government through the RTI2018-096273- B-I00 grant and the “Severo Ochoa” Grant CEX2019-000917-S for Research Centres of Excellence awarded to ICMAB. We also thank the Government of Catalonia (AGAUR) for grant 2021SGR01519. D.C. Malaspina was supported by the European Union’s Horizon 2020 research and innovation programme under Marie Sklodowska-Curie grant agreement No 6655919. We acknowledge discussions with Prof. Lars A. Berglund and Dr Yamila Garcia about chitin materials., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

WorMe: A user-oriented software for Caenorhabditis elegans length determination

  • Llobet Lladó, Josep
  • Garriga Alonso, Núria
  • Muñoz Juan, Amanda
  • Laromaine, Anna
Caenorhabditis elegans is a widely used animal model for biomedicl research. The lenght of this nematode is commonly used to asses its evelopment and its health. Typically, measurements are performed manually; however, software has been developed to automate this process. Most of these tools are designed for stereomicroscope images, and none work reliably for compound microscopy images. Here we present WorMe, a user-friendly software that measures C.elegans length in compound microscopy images. The program is versatile in handling various image types and can be analyse multiple images collectively. Funthermore, the user can accept of discard the detected objects, separate joined worms, correct erroneous measurements, and manually add new worms. The length results are presented in a spreadsheet file, with earch measurement linked to its image. Graphic data can also be exported., The work has been supported partially with RTI2018-096273B-I00, PID2024-1576370B-I00 (BACTIVE), PDC2023-145826-I00 (BIOCCHIP), funded by MCIN/AEI//10.13039/501100011033/FEDER “Una manera de hacer Europa”; the “Severo Ochoa” Programme for Centres of Excellence, in R&D CEX2019-000917-S (FUNFUTURE), CEX2023-001263-S (MATRANS42); the Generalitat de Catalunya (2021SGR00446 Grant), and European Union’s Horizon Europe research and innovation program under grant agreement No 101057527 (NextGEM). AL participates in CSIC-Conexion Nanomedicina del CSIC, EPNOE network, and Red Nanocare 2.0, Grant RED2022-134560-T funded by MCIN/AEI/10.13039/501100011033, JLL acknowledges ayudas JAE ICU, Consejo Superior de Investigaciones Científicas (CSIC), JAEICU-21-ICMAB01 (2021) in the framework of the Master of Bioinformatics and Biostatistics (UOC, 2021), NGA acknowledges ayudas JAEIntro, Consejo Superior de Investigaciones Científicas (CSIC), JAEINT-24-01745, (2024), AMJ acknowledges the Ph.D. scholarship (FPU18/05190)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S). With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Production and characterization of deuterated bacterial nanocellulose

  • Muñoz Juan, Amanda
  • Diaz, Daniela
  • Marin Ortega, Judith
  • Murugarren, Nerea
  • Campoy Quiles, Mariano
  • Zamorano, Felipe
  • Guardiola, Consuelo
  • Pérez, Martín
  • Laromaine, Anna
“Production and characterization of deuterated bacterial nanocellulose“ CSIC digital repository collects the data published in RSC Applied Polymers in 2026 with the title “Engineering Deuterated Bacterial Cellulose via Biosynthesis for Neutron Applications” in accordance with the data availability statement of the journal. The project aimed to produce deuterated bacterial nanocellulose (dBNC) using the “film to film” protocol to reduce time and costs. The second objective was to characterize the deuterated bacterial nanocellulose films using various physicochemical techniques (FTIR, NIR, Raman, and SR-µFTIR). These techniques demonstrated the homogeneous incorporation of deuterium into the chemical structure of bacterial nanocellulose (BNC). Finally, natural and deuterated BNC were irradiated with neutrons to determine whether neutrons interact differently with deuterated BNC, paving the way for future applications of dBNC in neutron-based technologies. The data in this repository support the results presented in the publication and are organized in order of appearance: 1.-Film to Film protocol for bacterial cellulose deuteration. It summarizes the materials and steps to produce dBNC. 2.-Table1_Absorbance values. Absorbance values at each wavelength, the formula used to calculate, and the ratios (average and standard deviation). 3.-FTIR_Figure2A. FTIR spectra used for the graphic in Figure 2.A. Equipment and conditions are also described. 4. X-Ray_Figure2B. Data, equipment, and conditions for Figure 2B. 5.-NIR spectra_Figure2C. NIR spectra presented in Figure 2.C. The integrity area for each region used to calculate the crystallinity index (CRNIR) is also collected here. 6.-ZetaPotentialData. Measurements were performed to analyze the surface charge of BNC and dBNC fibers. 7.-Figure 3 RamanData. Folder with the data, equipment, and conditions used for the characterization of dBNC. 8.-SR-uFTIR_Figure4. Data, equipment, and conditions for SR-µFTIR data obtained at ALBA Synchrotron. 9.-Figure5. Neutron interaction data. Information about neutrons' interaction with BNC and dBNC, and the simulations performed at the HISPaNoS facility of the National Accelerator Center (CAN) in Sevilla. The data is presented in text files (.txt) and spreadsheets (.csv). We recommend using text editors (such as Notepad, Wordpad), MS Word or Standard PDF viewers for text files. Numerical data is presented in a spreadsheet (.csv), and we recommend using MS Excel software. The methodology is explained in detail in the accompanying publication. The equipment characteristics, software, and measurement conditions are included in each file., SR-µFTIR experiments were performed at the BL01-MIRAS beamline at ALBA Synchrotron with the collaboration of ALBA staff (ID:2020094625). We are grateful to Agustin Mihi (ICMAB-CSIC) for providing access to the spectrometer, supervising the measurements, and guiding in data analysis. This research was supported by the Spanish Ministry of Science and Innovation through the RTI2018-096273-B-I00 and PID2021-122645OB-100 projects, ‘Severo Ochoa’ Program for Center of Excellence in R&D (CEX2019-000917), the Generalitat de Catalunya (2017SGR765 grant). A.M.J. acknowledges the Ph.D. scholarship (FPU18/05190) in the framework of the Biotechnology Ph.D. program of the UAB. A.M.J. and A.L. participate in the Spanish National Research Council (CSIC) interdisciplinary platform for sustainable plastics towards a circular economy (SusPlast), the Aerogels COST ACTION (CA 18125), the EPNOE network, Conexión Nanomedicina del CSIC, and Red Nanocare 2.0. M.P. thanks funding from the European Union Horizon 2022 research and innovation program under the Marie Sklodowska-Curie grant agreement N◦ 101106191. C.G. acknowledges the Subvenciones 2022 SUB-08 program from the Spanish Nuclear Safety Council (CSN) and the Spanish government through the ‘María de Maeztu Unit of Excellence’ accreditation (CEX2023-001397-M). Finally, the authors would like to express their gratitude to ICMAB-CSIC and CNA for their technical support., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., "1.-Film to Film protocol for bacterial cellulose deuteration. 2.-Table1_Absorbance values. 3.-FTIR_Figure2A. 4. X-Ray_Figure2B. 5.-NIR spectra_Figure2C. 6.-ZetaPotentialData. 7.-Figure 3 RamanData. 8.-SR-uFTIR_Figure4. 9.-Figure5. Neutron interaction data. ", Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

MRI/Photoluminescence Dual-Modal Imaging Magnetic PLGA Nanocapsules for Theranostics

  • Zhang, Yajie|||0000-0003-1566-1007
  • García-Gabilondo, Miguel|||0000-0002-2015-2621
  • Rosell Novel, Anna|||0000-0003-1082-3599
  • Roig i Serra, Anna|||0000-0001-6464-7573
Developing multifunctional and biocompatible drug delivery nanoplatforms that integrate high drug loads and multiple imaging modalities avoiding cross-interferences is extremely challenging. Here we report on the successful chemical reaction of the high quantum yield biodegradable and photoluminescent polyester (BPLP) with the poly(lactic-co-glycolic acid) (PLGA) polymer to fabricate biocompatible photoluminescent nanocapsules (NCs). Furthermore, we transform the PLGA-BPLP NCs into a magnetic resonance (MR)/photoluminescence dual-modal imaging theranostic platform by incorporating superparamagnetic iron oxide nanoparticles (SPIONs) into the polymeric shell. In vitro phantoms confirmed the excellent MRI-r relaxivity values of the NCs whilst the cellular uptake of these NCs was clearly observed by fluorescence optical imaging. Besides, the NCs (mean size ~270 nm) were loaded with ~1 wt% of a model protein (BSA) and their PEGylation provided a more hydrophilic surface. The NCs show biocompatibility in vitro, as hCMEC/D3 endothelial cells viability was not affected for particle concentration up to 500 μg/mL. Interestingly, NCs decorated with SPIONs can be exploited for magnetic guiding and retention.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Magnetic Mesoporous Silica Nanorods Loaded with Ceria and Functionalized with Fluorophores for Multimodal Imaging

  • Grzelak, Jan|||0000-0002-8404-0389
  • Gázquez, Jaume
  • Grayston, Alba|||0000-0002-1466-0099
  • Teles, Mariana|||0000-0001-5525-4049
  • Herranz, Fernando|||0000-0002-3743-0050
  • Roher Armentia, Nerea|||0000-0002-6659-4038
  • Rosell Novel, Anna|||0000-0003-1082-3599
  • Roig i Serra, Anna|||0000-0001-6464-7573
  • Gich, Martí|||0000-0001-9958-0057
Multifunctional magnetic nanocomposites based on mesoporous silica have a wide range of potential applications in catalysis, biomedicine, or sensing. Such particles combine responsiveness to external magnetic fields with other functionalities endowed by the agents loaded inside the pores or conjugated to the particle surface. Different applications might benefit from specific particle morphologies. In the case of biomedical applications, mesoporous silica nanospheres have been extensively studied while nanorods, with a more challenging preparation, have attracted much less attention despite the positive impact on the therapeutic performance shown by seminal studies. Here, we report on a sol-gel synthesis of mesoporous rodlike silica particles of two distinct lengths (1.4 and 0.9 μm) and aspect ratios (4.7 and 2.2) using Pluronic P123 as a structure-directing template and rendering ∼1 g of rods per batch. Iron oxide nanoparticles have been synthesized within the pores yielding maghemite (γ-FeO) nanocrystals of elongated shape (∼7 nm × 5 nm) with a [110] preferential orientation along the rod axis and a superparamagnetic character. The performance of the rods as T-weighted MRI contrast agents has also been confirmed. In a subsequent step, the mesoporous silica rods were loaded with a cerium compound and their surface was functionalized with fluorophores (fluorescamine and Cyanine5) emitting at λ = 525 and 730 nm, respectively, thus highlighting the possibility of multiple imaging modalities. The biocompatibility of the rods was evaluated in vitro in a zebrafish (Danio rerio) liver cell line (ZFL), with results showing that neither long nor short rods with magnetic particles caused cytotoxicity in ZFL cells for concentrations up to 50 μg/ml. We advocate that such nanocomposites can find applications in medical imaging and therapy, where the influence of shape on performance can be also assessed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Facile preparation of glycine-based mesoporous graphitic carbons with embedded cobalt nanoparticles

  • Wang, Wenhai
  • Tesio, Alvaro Y.
  • Olivares-Marín, Mara|||0000-0002-9797-7904
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
  • Tonti, Dino|||0000-0003-0240-1011
A simple route has been developed for the preparation of mesoporous graphitic carbons with embedded cobalt nanoparticles just using glycine as a nitrogen source, cobalt nitrate and distilled water. After heating the mixture to 300 °C under magnetic stirring, a dry solid product was obtained, which was then carbonized at 900 ºC under argon atmosphere. Changing the glycine/Co molar ratio allowed controlling the size of the cobalt particles and their dispersion in the carbon matrix, the porosity of the carbon and its graphitic character. The carbon-metal composites obtained were tested as oxygen cathodes in Li-O batteries. Cells assembled exhibited a full discharge capacity up to 2.19 mAh cm at a current of 0.05 mA cm and over 39 cycles at a cutoff capacity of 0.5 mAh cm. This work provides a green, feasible and simple way to prepare mesoporous graphitic carbons with embedded cobalt nanoparticles without involving templates.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Highly Aligned Bacterial Nanocellulose Films Obtained During Static Biosynthesis in a Reproducible and Straightforward Approach

  • Murugarren, Nerea|||0000-0003-0251-4358
  • Roig-Sanchez, Soledad|||0000-0002-7474-3769
  • Anton-Sales, Irene|||0000-0003-3511-2574
  • Malandain, Nanthilde|||0000-0001-6447-2726
  • Xu, Kai|||0000-0001-6999-1904
  • Solano, Eduardo|||0000-0002-2348-2271
  • Reparaz, Juan Sebastian
  • Laromaine, Anna|||0000-0002-4764-0780
Bacterial nanocellulose (BNC) is usually produced as randomly-organized highly pure cellulose nanofibers films. Its high water-holding capacity, porosity, mechanical strength, and biocompatibility make it unique. Ordered structures are found in nature and the properties appearing upon aligning polymers fibers inspire everyone to achieve highly aligned BNC (A-BNC) films. This work takes advantage of natural bacteria biosynthesis in a reproducible and straightforward approach. Bacteria confined and statically incubated biosynthesized BNC nanofibers in a single direction without entanglement. The obtained film is highly oriented within the total volume confirmed by polarization-resolved second-harmonic generation signal and Small Angle X-ray Scattering. The biosynthesis approach is improved by reusing the bacterial substrates to obtain A-BNC reproducibly and repeatedly. The suitability of A-BNC as cell carriers is confirmed by adhering to and growing fibroblasts in the substrate. Finally, the thermal conductivity is evaluated by two independent approaches, i.e., using the well-known 3 ω -method and a recently developed contactless thermoreflectance approach, confirming a thermal conductivity of 1.63 W mK -1 in the direction of the aligned fibers versus 0.3 W mK -1 perpendicularly. The fivefold increase in thermal conductivity of BNC in the alignment direction forecasts the potential of BNC-based devices outperforming some other natural polymer and synthetic materials. Bacteria confined and statically incubated for a few days biosynthesized bacterial nanocellulose (BNC) nanofibers in a single direction without entanglement. The obtained film is highly oriented within the total volume of the film, and it shows a five-fold increase in thermal conductivity in the parallel direction forecasting the potential of BNC-based devices outperforming some other natural polymer and synthetic materials.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Caenorhabditis elegans RAC1/ced-10 mutants as a new animal model to study very early stages of Parkinson's disease

  • Muñoz Juan, Amanda|||0000-0001-9549-782X
  • Benseny Cases, Núria|||0000-0003-4603-6829
  • Guha, Sanjib
  • Barba, Ignasi|||0000-0001-9886-3776
  • Caldwell, K A.
  • Caldwell, G A.
  • Agulló, Laura|||0000-0002-8739-0456
  • Yuste, Victor José|||0000-0001-5322-9261
  • Laromaine, Anna|||0000-0002-4764-0780
  • Dalfo, Esther|||0000-0003-4677-8515
Patients with Parkinson's disease (PD) display non-motor symptoms arising prior to the appearance of motor signs and before a clear diagnosis. Motor and non-motor symptoms correlate with progressive deposition of the protein alpha-synuclein (Asyn) both within and outside of the central nervous system, and its accumulation parallels neurodegeneration. The genome of Caenorhabditis elegans does not encode a homolog of Asyn, thus rendering this nematode an invaluable system with which to investigate PD-related mechanisms in the absence of interference from endogenous Asyn aggregation. CED-10 is the nematode homolog of human RAC1, a small GTPase needed to maintain the function and survival of dopaminergic neurons against human Asyn-induced toxicity in C. elegans. Here, we introduce C. elegans RAC1/ced-10 mutants as a predictive tool to investigate early PD symptoms before neurodegeneration occurs. Deep phenotyping of these animals reveals that, early in development, they displayed altered defecation cycles, GABAergic abnormalities and an increased oxidation index. Moreover, they exhibited altered lipid metabolism evidenced by the accumulation of lipid droplets. Lipidomic fingerprinting indicates that phosphatidylcholine and sphingomyelin, but not phosphatidylethanolamine or phosphatidylserine, were elevated in RAC1/ced-10 mutant nematodes. These collective characteristics reflect the non-motor dysfunction, GABAergic neurotransmission defects, upregulation of stress response mechanisms, and metabolic changes associated with early-onset PD. Thus, we put forward an easy-to-manipulate preclinical animal model to deepen our understanding of early-stage PD and accelerate the translational path for therapeutic target discovery.