Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 52
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Sulfate-Decorated Amorphous-Crystalline Cobalt-Iron Oxide Nanosheets to Enhance O-O Coupling in the Oxygen Evolution Reaction

  • Wang, Xiang
  • Li, Junshan|||0000-0002-1482-1972
  • Xue, Qian
  • Han, Xu|||0000-0001-8319-8830
  • Xing, Congcong|||0000-0001-7674-6720
  • Liang, Zhifu
  • Guardia, Pablo|||0000-0001-9076-4642
  • Zuo, Yong|||0000-0003-1564-467X
  • Du, Ruifeng
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The electrochemical oxygen evolution reaction (OER) plays a fundamental role in several energy technologies, which performance and cost-effectiveness are in large part related to the used OER electrocatalyst. Herein, we detail the synthesis of cobalt-iron oxide nanosheets containing controlled amounts of well-anchored SO42- anionic groups (CoFexOy-SO4). We use a cobalt-based zeolitic imidazolate framework (ZIF-67) as the structural template and a cobalt source and Mohr's salt ((NH4)2Fe(SO4)2·6H2O) as the source of iron and sulfate. When combining the ZIF-67 with ammonium iron sulfate, the protons produced by the ammonium ion hydrolysis (NH4+ + H2O = NH3·H2O + H+) etch the ZIF-67, dissociating its polyhedron structure, and form porous assemblies of two-dimensional nanostructures through a diffusion-controlled process. At the same time, iron ions partially replace cobalt within the structure, and SO42- ions are anchored on the material surface by exchange with organic ligands. As a result, ultrathin CoFexOy-SO4 nanosheets are obtained. The proposed synthetic procedure enables controlling the amount of Fe and SO4 ions and analyzing the effect of each element on the electrocatalytic activity. The optimized CoFexOy-SO4 material displays outstanding OER activity with a 10 mA cm-2 overpotential of 268 mV, a Tafel slope of 46.5 mV dec-1, and excellent stability during 62 h. This excellent performance is correlated to the material's structural and chemical parameters. The assembled nanosheet structure is characterized by a large electrochemically active surface area, a high density of reaction sites, and fast electron transportation. Meanwhile, the introduction of iron increases the electrical conductivity of the catalysts and provides fast reaction sites with optimum bond energy and spin state for the adsorption of OER intermediates. The presence of sulfate ions at the catalyst surface modifies the electronic energy level of active sites, regulates the adsorption of intermediates to reduce the OER overpotential, and promotes the surface charge transfer, which accelerates the formation of oxygenated intermediates. Overall, the present work details the synthesis of a high-efficiency OER electrocatalyst and demonstrates the introduction of nonmetallic anionic groups as an excellent strategy to promote electrocatalytic activity in energy conversion technologies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Palladium Hydride on C2N to Boost Formate Oxidation

  • Wang, Xiang
  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Han, Xu|||0000-0001-8319-8830
  • Yu, Jing|||0000-0002-7620-745X
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Liang, Zhifu
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Li, Junshan|||0000-0002-1482-1972
The lack of electrocatalysts for the formate oxidation reaction (FOR) hampers the deployment of direct formate fuel cells (DFFCs). To overcome this limitation, herein, we detail the production of palladium hydride particles supported on CN (PdH@CN) via a facile method. PdH@CN displays excellent FOR performance, reaching current densities up to 5.6 A·mg and stable cycling and chronoamperometric operation. The Pd lattice expands due to the hydrogen intercalation. Besides, an electronic redistribution associated with the distinct electronegativity of Pd and H is observed. Both phenomena modify the electron energy levels, enhancing the activity and stability of the composite catalyst. More specifically, differential functional theory calculations show H intercalation to downshift the Pd d-band center in Pd@CN, weakening adsorbate binding and accelerating the FOR rate-determining step.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Elucidating the Role of the Metal Catalyst and Oxide Support in the Ru/CeO2-Catalyzed CO2 Methanation Mechanism

  • López-Rodríguez, Sergio
  • Davó-Quiñonero, Arantxa
  • Bailón-García, Esther
  • Lozano-Castello, Dolores
  • Herrera, Facundo C.
  • Pellegrin, Eric
  • Escudero, Carlos
  • García-Melchor, Max
  • Bueno López, Agustín
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
  • Davó-Quiñonero, Arantxa|||/items/47d20eca-ef03-4528-9609-8a3c0caefc98
  • Lozano-Castello, Dolores|||/items/0c87c879-ba71-4796-9186-21658a969c6b
This study addresses the yet unresolved CO2 methanation mechanism on a Ru/CeO2 catalyst by means of near-ambient-pressure X-ray photoelectron spectroscopy (NAP–XPS) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) complemented with periodic density functional theory (DFT) calculations. NAP–XPS results show that the switch from H2 to CO2 + H2 mixture oxidizes both the Ru and CeO2 phases at low temperatures, which is explained by the CO2 adsorption modes assessed by means of DFT on each representative surface. CO2 adsorption on Ru is dissociative and moderately endergonic, leading to polybonded Ru-carbonyl groups whose hydrogenation is the rate-determining step in the overall process. Unlike on Ru metal, CO2 can be strongly adsorbed as carbonates on ceria surface oxygen sites or on the reduced ceria at oxygen vacancies as carboxylates (CO2–δ), resulting in the reoxidation of ceria. Carboxylates can then evolve as CO, which is released either via direct splitting at relatively low temperatures or through stable formate species at higher temperatures. DRIFTS confirm the great stability of formates, whose depletion relates with CO2 conversion in the reaction cell, while carbonates remain on the surface up to higher temperatures. CO generation on ceria serves as an additional reservoir of Ru-carbonyls, cooperating to the overall CO2 methanation process. Altogether, this study highlights the noninnocent role of the ceria support in the performance of Ru/CeO2 toward CO2 methanation.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phosphorous incorporation in Pd2Sn alloys for electrocatalytic ethanol oxidation

  • Yu, Xiaoting
  • Liu, Junfeng
  • Li, Junshan
  • Luo, ZhiShan
  • Zuo, Yong
  • Xing, Congcong
  • Llorca, Jordi
  • Nasiou, Déspina
  • Arbiol, Jordi
  • Pan, Kai
  • Kleinhanns, Tobias
  • Xie, Ying
  • Cabot, Andreu
Direct ethanol fuel cells (DEFCs) show a huge potential to power future electric vehicles and portable electronics, but their deployment is currently limited by the unavailability of proper electrocatalysis for the ethanol oxidation reaction (EOR). In this work, we engineer a new electrocatalyst by incorporating phosphorous into a palladium-tin alloy and demonstrate a significant performance improvement toward EOR. We first detail a synthetic method to produce Pd2Sn:P nanocrystals that incorporate 35% of phosphorus. These nanoparticles are supported on carbon black and tested for EOR. Pd2Sn:P/C catalysts exhibit mass current densities up to 5.03 A mgPd−1, well above those of Pd2Sn/C, PdP2/C and Pd/C reference catalysts. Furthermore, a twofold lower Tafel slope and a much longer durability are revealed for the Pd2Sn:P/C catalyst compared with Pd/C. The performance improvement is rationalized with the aid of density functional theory (DFT) calculations considering different phosphorous chemical environments. Depending on its oxidation state, surface phosphorus introduces sites with low energy OH− adsorption and/or strongly influences the electronic structure of palladium and tin to facilitate the oxidation of the acetyl to acetic acid, which is considered the EOR rate limiting step. DFT calculations also points out that the durability improvement of Pd2Sn:P/C catalyst is associated to the promotion of OH adsorption that accelerates the oxidation of intermediate poisoning COads, reactivating the catalyst surface., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP, ENE2016- 77798-C4-3-R, and ENE2017-85087-C3. X. Y. thanks the China Scholarship Council for the scholarship support. J. Liu acknowledges support from the Jiangsu University Foundation (4111510011). J. Li obtained International Postdoctoral Exchange Fellowship Program (Talent-Introduction program) in 2019 and is grateful for the project (2019M663468) funded by the China Postdoctoral Science Foundation. Authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246, and from IST Austria. ICN2 acknowledges the support from the Severo Ochoa Programme (MINECO, grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. J. Llorca is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128 and to ICREA Academia program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selective methanol‐to‐formate electrocatalytic conversion on branched nickel carbide

  • Li, Junshan
  • Wei, Ruilin
  • Zuo, Yong
  • Han, Xu
  • Arbiol, Jordi
  • Llorca, Jordi
  • Yang, Yaoyue
  • Cabot, Andreu
  • Cui, Chunhua
A methanol economy will be favored by the availability of low‐cost catalysts able to selectively oxidize methanol to formate. This selective oxidation would allow extraction of the largest part of the fuel energy while concurrently producing a chemical with even higher commercial value than the fuel itself. Herein, we present a highly active methanol electrooxidation catalyst based on abundant elements and with an optimized structure to simultaneously maximize interaction with the electrolyte and mobility of charge carriers. In situ infrared spectroscopy combined with nuclear magnetic resonance spectroscopy showed that branched nickel carbide particles are the first catalyst determined to have nearly 100 % electrochemical conversion of methanol to formate without generating detectable CO2 as a byproduct. Electrochemical kinetics analysis revealed the optimized reaction conditions and the electrode delivered excellent activities. This work provides a straightforward and cost‐efficient way for the conversion of organic small molecules and the first direct evidence of a selective formate reaction pathway., J. Li obtained an International Postdoctoral Exchange Fellowship Program (Talent‐Introduction program) in 2019 and is grateful for the project (2019M663468) funded by the China Postdoctoral Science Foundation. This work was supported from the UESTC start‐up funding and the Recruitment Program of Thousand Youth Talents. Y. Yang acknowledges the funding No.21603177 from NSFC. It was also supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016‐77798‐C4‐3‐R) and VALPEC (ENE2017‐85087‐C3). X. Wang, Y. Zuo, and X. Han thank the China Scholarship Council (CSC) for scholarship support. X. Han and J. Arbiol acknowledge funding from Generalitat de Catalunya 2017 SGR 327. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV‐2013‐0295). IREC and ICN2 are funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. J. Llorca is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018‐093996‐B‐C31, GC 2017 SGR 128 and to ICREA Academia program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tin selenide molecular precursor for the solution processing of thermoelectric materials and devices

  • Zhang, Yu
  • Xing, Congcong
  • Zhang, Ting
  • Li, Mengyao
  • Pacios, Merce
  • Yu, Xiaoting
  • Arbiol, Jordi
  • Llorca, Jordi
  • Cadavid, Doris
  • Ibáñez, María
  • Cabot, Andreu
In the present work, we report a solution-based strategy to produce crystallographically textured SnSe bulk nanomaterials and printed layers with optimized thermoelectric performance in the direction normal to the substrate. Our strategy is based on the formulation of a molecular precursor that can be continuously decomposed to produce a SnSe powder or printed into predefined patterns. The precursor formulation and decomposition conditions are optimized to produce pure phase 2D SnSe nanoplates. The printed layer and the bulk material obtained after hot press displays a clear preferential orientation of the crystallographic domains, resulting in an ultralow thermal conductivity of 0.55 W m–1 K–1 in the direction normal to the substrate. Such textured nanomaterials present highly anisotropic properties with the best thermoelectric performance in plane, i.e., in the directions parallel to the substrate, which coincide with the crystallographic bc plane of SnSe. This is an unfortunate characteristic because thermoelectric devices are designed to create/harvest temperature gradients in the direction normal to the substrate. We further demonstrate that this limitation can be overcome with the introduction of small amounts of tellurium in the precursor. The presence of tellurium allows one to reduce the band gap and increase both the charge carrier concentration and the mobility, especially the cross plane, with a minimal decrease of the Seebeck coefficient. These effects translate into record out of plane ZT values at 800 K., M.I. acknowledges financial support from IST Austria. Y.L. acknowledges funding from the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie grant agreement no. 754411. J.L. is a Serra Húnter Fellow and is grateful to ICREA Academia program and projects MICINN/FEDER RTI2018-093996-B-C31 and GC 2017 SGR 128. This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R). Y.Z., C.X., M.L., X.Y., and T.Z. thank the China Scholarship Council for scholarship support. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A SnS2 molecular precursor for conformal nanostructured coatings

  • Zuo, Yong
  • Li, Junshan
  • Yu, Xiaoting
  • Du, Ruifeng
  • Zhang, Ting
  • Wang, Xiang
  • Arbiol, Jordi
  • Llorca, Jordi
  • Cabot, Andreu
We present a simple, versatile, and scalable procedure to produce SnS2 nanostructured layers based on an amine/thiol-based molecular ink. The ratios amine/thiol and Sn/S, and the reaction conditions, are systematically investigated to produce phase-pure SnS2 planar and conformal layers with a tremella-like SnS2 morphology. Such nanostructured layers are characterized by excellent photocurrent densities. The same strategy can be used to produce SnS2–graphene composites by simply introducing graphene oxide (GO) into the initial solution. Conveniently, the solvent mixture is able to simultaneously dissolve the Sn and Se powders and reduce the GO. Furthermore, SnS2-xSex ternary coatings and phase-pure SnSe2 can be easily produced by simply incorporating proper amounts of Se into the initial ink formulation. Finally, the potential of this precursor ink to produce gram-scale amounts of unsupported SnS2 is investigated., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the projects SEHTOP, ENE2016-77798-C4-3-R, and ENE2017-85087-C3. Y.Z. thanks the China Scholarship Council for the scholarship support (no. 201606500001). The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. J. Llorca is a Serra Húnter Fellow and is grateful to ICREA Academia program and to MINECO/FEDER grant RTI2018-093996-B-C31 and GC 2017 SGR 128. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. T.Z. has received funding from the CSC-UAB PhD scholarship program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

ZnSe/N-doped carbon nanoreactor with multiple adsorption sites for stable lithium–sulfur batteries

  • Yang, Dawei
  • Zhang, Chaoqi
  • Jacas Biendicho, Jordi
  • Han, Hu
  • Liang, Zhifu
  • Du, Ruifeng
  • Li, Mengyao
  • Li, Junshan
  • Arbiol, Jordi
  • Llorca, Jordi
  • Zhou, Yingtang
  • Morante, Joan Ramón
  • Cabot, Andreu
To commercially realize the enormous potential of lithium–sulfur batteries (LSBs) several challenges remain to be overcome. At the cathode, the lithium polysulfide (LiPS) shuttle effect must be inhibited and the redox reaction kinetics need to be substantially promoted. In this direction, this work proposes a cathode material based on a transition-metal selenide (TMSe) as both adsorber and catalyst and a hollow nanoreactor architecture: ZnSe/N-doped hollow carbon (ZnSe/NHC). It is here demonstrated both experimentally and by means of density functional theory that this composite provides three key benefits to the LSBs cathode: (i) A highly effective trapping of LiPS due to the combination of sulfiphilic sites of ZnSe, lithiophilic sites of NHC, and the confinement effect of the cage-based structure; (ii) a redox kinetic improvement in part associated with the multiple adsorption sites that facilitate the Li+ diffusion; and (iii) an easier accommodation of the volume expansion preventing the cathode damage due to the hollow design. As a result, LSB cathodes based on S@ZnSe/NHC are characterized by high initial capacities, superior rate capability, and an excellent stability. Overall, this work not only demonstrates the large potential of TMSe as cathode materials in LSBs but also probes the nanoreactor design to be a highly suitable architecture to enhance cycle stability., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economíay Competitividad through the project SEHTOP, ENE2016-77798-C4-3-R, and ENE2017-85087-C3. D. Yang, C. Zhang, and X. Han thank the China Scholarship Council for the scholarship support. Z. Liang acknowledges funding from a MINECO SO FPI PhD grant (SEV-2013-0295-17-1). J. Li obtained an International Postdoctoral Exchange Fellowship (Talent-Introduction program) in 2019 and is grateful for the project (2019M663468) funded by the China Postdoctoral Science Foundation. The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 acknowledges the support from the Severo Ochoa Programme (MINECO, grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. J. Llorca is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128, and to the ICREA Academia program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancement of phase stability and optoelectronic performance of BiFeO3 thin films via cation co-substitution

  • Machado, Pamela
  • Caño, Iván
  • Menéndez, César
  • Cazorla, Claudio
  • Tan, Huan
  • Fina, Ignasi
  • Campoy Quiles, Mariano
  • Escudero, Carlos
  • Tallarida, Massimo
  • Coll, Mariona
Compositional engineering of BiFeO3 can significantly boost its photovoltaic performance. Therefore, controlling site substitution and understanding how it affects the optical and electronic properties while achieving robust and stable phases is essential to continue progressing in this field. Here the influence of cation co-substitution in BiFeO3 on phase purity, optical and electronic properties is investigated by means of X-ray diffraction, spectroscopic ellipsometry and X-ray absorption spectroscopy, respectively. Piezoelectric force microscopy and ferroelectric characterization at room temperature has been carried out in co-doped BiFeO3 films. First-principles calculations are also performed and compared to the experimental observations. It is shown that the incorporation of La3+ in Bi(Fe,Co)O3 films improves phase purity and stability while preserving the reduced band gap achieved in metastable Bi(Fe,Co)O3. Moreover, it is suggested that the changes in the optoelectronic properties are mainly dictated by the hybridisation between unoccupied Co 3d and O 2p states along with the presence of Co3+/Co2+ species. This thorough study on (Bi,La)(Fe,Co)O3 thin films coupled with the use of a cost-effective and facile solution deposition synthesis increases the motivation to continue exploiting the potential of these perovskite materials., This research was supported by the Spanish Ministerio de Ciencia, Innovación y Universidades (“Severo Ochoa” Programme for Centres of Excellence in R&D CEX2019-000917-S, MAT2017-83169-R, RTI2018-093996-B-C32, PID2019-107727RB-I00 (AEI/FEDER, EU)). P. M. thanks financial support from FPI fellowship (PRE2018-084618). C. M. and C. C. acknowledge computational resources and technical assistance from the Australian Government and the Government of Western Australia through the National Computational Infrastructure (NCI) and Magnus under the National Computational Merit Allocation Scheme and The Pawsey Supercomputing Centre. The authors acknowledge Prof. J. Fontcuberta for providing access to his experimental facilities and the support of ALBA staff for the successful performance of the measurements at CIRCE beamline of the ALBA Synchrotron Light Source. I. F. and C. C. acknowledge support from the Spanish Ministry of Science, Innovation and Universities under the “Ramón y Cajal” fellowship RYC2017-226531 and RYC2018-024947-I, respectively. M. C and I. F acknowledge Beca Leonardo from fundación BBVA. H. T is financially supported by China Scholarship Council (CSC) with no. 201906050014. The work of P. M. and H. T have been done in the framework of the doctorate in Materials Science of the Autonomous University of Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomically dispersed Fe in a C2N based catalyst as a sulfur host for efficient lithium–sulfur batteries

  • Liang, Zhifu
  • Yang, Dawei
  • Tang, Peng-Yi
  • Zhang, Chaoqi
  • Jacas Biendicho, Jordi
  • Zhang, Yi
  • Llorca, Jordi
  • Wang, Xiang
  • Li, Junshan
  • Heggen, Marc
  • David, Jeremy
  • Dunin-Borkowski, Rafal E.
  • Zhou, Yingtang
  • Morante, Joan Ramón
  • Cabot, Andreu
  • Arbiol, Jordi
Lithium–sulfur batteries (LSBs) are considered to be one of the most promising next generation energy storage systems due to their high energy density and low material cost. However, there are still some challenges for the commercialization of LSBs, such as the sluggish redox reaction kinetics and the shuttle effect of lithium polysulfides (LiPS). Here a 2D layered organic material, C2N, loaded with atomically dispersed iron as an effective sulfur host in LSBs is reported. X‐ray absorption fine spectroscopy and density functional theory calculations prove the structure of the atomically dispersed Fe/C2N catalyst. As a result, Fe/C2N‐based cathodes demonstrate significantly improved rate performance and long‐term cycling stability. Fe/C2N‐based cathodes display initial capacities up to 1540 mAh g−1 at 0.1 C and 678.7 mAh g−1 at 5 C, while retaining 496.5 mAh g−1 after 2600 cycles at 3 C with a decay rate as low as 0.013% per cycle. Even at a high sulfur loading of 3 mg cm−2, they deliver remarkable specific capacity retention of 587 mAh g−1 after 500 cycles at 1 C. This work provides a rational structural design strategy for the development of high‐performance cathodes based on atomically dispersed catalysts for LSBs., ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV‐2017‐0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. J.D. has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowka‐Curie grant agreement No 665919 (P‐SPHERE) co‐funded by Severo Ochoa Programme. Z.L. acknowledges funding from MINECO SO‐FPT PhD grant (SEV‐2013‐0295‐17‐1). This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 823717‐ESTEEM3. The present work is supported by the European Regional Development Funds and by the Spanish MINECO through the projects SEHTOP, ENE2016‐77798‐C4‐3‐R, and ENE2017‐85087‐C3. D.Y., X.W., and C.Z. thank the China Scholarship Council for the scholarship support. P.T. acknowledges Humboldt Research Fellowship for Postdoctoral Researchers sponsored by the Alexander von Humboldt Foundation. J.L. obtained International Postdoctoral Exchange Fellowship Program (Talent‐Introduction program) in 2019 and is grateful for the project (2019M663468) funded by the China Postdoctoral Science Foundation. Authors acknowledge funding from Generalitat de Catalunya 2017SGR327 and 2017SGR1246. J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018‐093996‐B‐C31, GC 2017 SGR 128 and to ICREA Academia program. The authors thank Jessica Padilla, Dr. Albert Llorente Mola, and Dr. Tariq Jawhari support in ICN2, IREC and UB, respectively for the help in additional analyses performed in the samples., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A direct z-scheme for the photocatalytic hydrogen production from a water ethanol mixture on CoTiO3/TiO2 heterostructures

  • Xing, Congcong
  • Liu, Yongpeng
  • Zhang, Yu
  • Wang, Xiang
  • Guardia, Pablo
  • Yao, Liang
  • Han, Xu
  • Zhang, Ting
  • Arbiol, Jordi
  • Soler, Lluís
  • Chen, Yufen
  • Sivula, Kevin
  • Guijarro, Néstor
  • Cabot, Andreu
  • Llorca, Jordi
Photocatalytic H2 evolution from ethanol dehydrogenation is a convenient strategy to store solar energy in a highly valuable fuel with potential zero net CO2 balance. Herein, we report on the synthesis of CoTiO3/TiO2 composite catalysts with controlled amounts of highly distributed CoTiO3 nanodomains for photocatalytic ethanol dehydrogenation. We demonstrate these materials to provide outstanding hydrogen evolution rates under UV and visible illumination. The origin of this enhanced activity is extensively analyzed. In contrast to previous assumptions, UV–vis absorption spectra and ultraviolet photoelectron spectroscopy (UPS) prove CoTiO3/TiO2 heterostructures to have a type II band alignment, with the conduction band minimum of CoTiO3 below the H2/H+ energy level. Additional steady-state photoluminescence (PL) spectra, time-resolved PL spectra (TRPLS), and electrochemical characterization prove such heterostructures to result in enlarged lifetimes of the photogenerated charge carriers. These experimental evidence point toward a direct Z-scheme as the mechanism enabling the high photocatalytic activity of CoTiO3/TiO2 composites toward ethanol dehydrogenation. In addition, we probe small changes of temperature to strongly modify the photocatalytic activity of the materials tested, which could be used to further promote performance in a solar thermophotocatalytic reactor., This work was supported by projects MICINN/FEDER RTI2018-093996-B-C31 and RTI2018-095498-J-I00. J.A., T.Z., and X.H. thank funding from GC 2017 SGR 327 and the MINECO project (ENE2017-85087-C3). ICN2 thanks the support from the Severo Ochoa program (MINECO, no. SEV-2013-0295) and the CERCA program/Generalitat de Catalunya. N.G. and Y.L. thank the Swiss National Science Foundation (SNF) for funding under the Ambizione Energy (no. PZENP2_166871). Y.Z., C.X., X.W., and T.Z. acknowledge the China Scholarship Council (CSC) for scholarship support. Part of the present work has been performed in the framework of the Universitat Autónoma de Barcelona Materials Science PhD program. J.L. is a Serra Hunter fellow and is grateful to GC 2017 SGR 128 and the ICREA Academia program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Au/TiO2 2D-Photonic Crystals as UV–Visible Photocatalysts for H2 Production

  • Torras, Miquel
  • Molet, Pau
  • Soler, Lluís
  • Llorca, Jordi
  • Roig Serra, Anna
  • Mihi, Agustín
Noble metal decoration of wideband gap semiconductors enables the excitation of surface plasmons in the visible range that upon relaxation generate hot carriers used for catalysis. However, this strategy leads to photocatalytic conversion efficiencies that are still low. Here, a light-trapping scheme is used to amplify the light-harvesting efficiency of the TiO2 semiconductor beyond the UV region by coupling a 2D-photonic crystal to Au decorated titania. This approach is easily scalable using soft nanoimprinting lithography to prepare Au/TiO2 2D-photonic photocatalysts. In a first process, gold nanoparticles (Au NPs) are in situ infiltrated in the superficial 50 nm of a mesoporous titania (mTiO2) scaffold patterned with the photonic structure, while in a second one 2D-photonic crystals with a homogeneous volume distribution of the Au colloids are achieved. The dependence of the optical properties of the photonic crystals on the lattice parameter, geometry, and metal loading is presented through extinction measurements and analyzed through simulations. The improved photocatalytic performance of the substrates is tested for hydrogen production where a maximum of 8.5 mmol gcat−1 h−1 of H2 is recorded and attributed to photonic–plasmonic effects. These results may open new avenues in solar harvesting for hydrogen production using photonic crystals as photocatalysts., M.T. and P.M. contributed equally to this work. This research received funding from the Spanish Ministry of Science, Innovation and Universities, through the RTI2018-096273-B-I00, RTI2018-093996-B-C31, and PID2019-106860GB-I00 projects, the “Severo Ochoa” Programme for Centers of Excellence in R&D grant FUNFUTURE (CEX2019-000917-S), and the Generalitat de Catalunya (2017SGR765 and 2017SGR128 grants). The Spanish Ministry of Education, Culture and Sport, is funding the FPU Fellow of MT (FPU16/05452). P.M. acknowledges financial support from an FPI contract (2017) of the MICINN (Spain) cofounded by the ESF and the UAB. M.T. is enrolled in the Materials Science Ph.D. Program of the UAB (Universitat Autònoma de Barcelona). L.S. is grateful to MICINN Ramon y Cajal program for individual fellowship grant agreement RYC2019-026704-I. J.L. is a Serra Húnter Fellow and is grateful to ICREA Academia Program., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of the Annealing Atmosphere on Crystal Phase and Thermoelectric Properties of Copper Sulfide

  • Li, Mengyao
  • Liu, Yu
  • Zhang, Yu
  • Han, Xu
  • Zhang, Ting
  • Zuo, Yong
  • Xie, Chenyang
  • Xiao, Ke
  • Arbiol, Jordi
  • Llorca, Jordi
  • Ibáñez, María
  • Liu, Junfeng
  • Cabot, Andreu
Cu2-xS has become one of the most promising thermoelectric materials for application in the middle-high temperature range. Its advantages include the abundance, low cost, and safety of its elements and a high performance at relatively elevated temperatures. However, stability issues limit its operation current and temperature, thus calling for the optimization of the material performance in the middle temperature range. Here, we present a synthetic protocol for large scale production of covellite CuS nanoparticles at ambient temperature and atmosphere, and using water as a solvent. The crystal phase and stoichiometry of the particles are afterward tuned through an annealing process at a moderate temperature under inert or reducing atmosphere. While annealing under argon results in Cu1.8S nanopowder with a rhombohedral crystal phase, annealing in an atmosphere containing hydrogen leads to tetragonal Cu1.96S. High temperature X-ray diffraction analysis shows the material annealed in argon to transform to the cubic phase at ca. 400 K, while the material annealed in the presence of hydrogen undergoes two phase transitions, first to hexagonal and then to the cubic structure. The annealing atmosphere, temperature, and time allow adjustment of the density of copper vacancies and thus tuning of the charge carrier concentration and material transport properties. In this direction, the material annealed under Ar is characterized by higher electrical conductivities but lower Seebeck coefficients than the material annealed in the presence of hydrogen. By optimizing the charge carrier concentration through the annealing time, Cu2-xS with record figures of merit in the middle temperature range, up to 1.41 at 710 K, is obtained. We finally demonstrate that this strategy, based on a low-cost and scalable solution synthesis process, is also suitable for the production of high performance Cu2-xS layers using high throughput and cost-effective printing technologies., This work was supported by the European Regional Development Funds. M.Y.L., X.H., T.Z., and K.X. thank the China Scholarship Council for scholarship support. M.I. acknowledges financial support from IST Austria. J.L. acknowledges support from the National Natural Science Foundation of China (No. 22008091), the funding for scientific research startup of Jiangsu University (No. 19JDG044), and Jiangsu Provincial Program for High-Level Innovative and Entrepreneurial Talents Introduction. J.L. is a Serra Húnter fellow and is grateful to the ICREA Academia program and projects MICINN/FEDER RTI2018-093996-B-C31 and GC 2017 SGR 128. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. T.Z. has received funding from the CSC-UAB PhD scholarship program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced thermoelectric performance of n-type bi2se3 nanosheets through sn doping

  • Li, Mengyao
  • Zhang, Yu
  • Zhang, Ting
  • Zuo, Yong
  • Xiao, Ke
  • Arbiol, Jordi
  • Llorca, Jordi
  • Liu, Yu
  • Cabot, Andreu
The cost-effective conversion of low-grade heat into electricity using thermoelectric devices requires developing alternative materials and material processing technologies able to reduce the currently high device manufacturing costs. In this direction, thermoelectric materials that do not rely on rare or toxic elements such as tellurium or lead need to be produced using high-throughput technologies not involving high temperatures and long processes. BiSe is an obvious possible Tefree alternative to BiTe for ambient temperature thermoelectric applications, but its performance is still low for practical applications, and additional efforts toward finding proper dopants are required. Here, we report a scalable method to produce BiSe nanosheets at low synthesis temperatures. We studied the influence of different dopants on the thermoelectric properties of this material. Among the elements tested, we demonstrated that Sn doping resulted in the best performance. Sn incorporation resulted in a significant improvement to the BiSe Seebeck coefficient and a reduction in the thermal conductivity in the direction of the hot-press axis, resulting in an overall 60% improvement in the thermoelectric figure of merit of BiSe ., M.L., Y.Z., T.Z. and K.X. thank the China Scholarship Council for their scholarship support. Y.L. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 754411. J.L. thanks the ICREA Academia program and projects MICINN/FEDER RTI2018-093996-B-C31 and G.C. 2017 SGR 128. ICN2 acknowledges funding from the Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO ENE2017-85087-C3.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Facing Seawater Splitting Challenges by Regeneration with Ni−Mo−Fe Bifunctional Electrocatalyst for Hydrogen and Oxygen Evolution

  • Ros, Carles
  • Murcia-López, Sebastián
  • Garcia, Xènia
  • Rosado, Marcos
  • Arbiol, Jordi
  • Llorca, Jordi
  • Morante, Javier
Hydrogen, produced by water splitting, has been proposed as one of the main green energy vectors of the future if produced from renewable energy sources. However, to substitute fossil fuels, large amounts of pure water are necessary, scarce in many world regions. In this work, we fabricate efficient and earth-abundant electrodes, study the challenges of using real seawater, and propose an electrode regeneration method to face undesired salt deposition. Ni−Mo−Fe trimetallic electrocatalyst is deposited on non-expensive graphitic carbon felts both for hydrogen (HER) and oxygen evolution reactions (OER) in seawater and alkaline seawater. Cl pitting and the chlorine oxidation reaction are suppressed on these substrates and alkalinized electrolyte. Precipitations on the electrodes, mainly CaCO, originating from seawater-dissolved components have been studied, and a simple regeneration technique is proposed to rapidly dissolve undesired deposited CaCO in acidified seawater. Under alkaline conditions, Ni−Mo−Fe-based catalyst is found to reconfigure, under cathodic bias, into Ni−Mo−Fe alloy with a cubic crystalline structure and Ni : Fe(OH) redeposits whereas, under anodic bias, it is transformed into a follicular Ni:FeOOH structure. High productivities over 300 mA cm and voltages down to 1.59 V@10 mA cm for the overall water splitting reaction have been shown, and electrodes are found stable for over 24 h without decay in alkaline seawater conditions and with energy efficiency higher than 61.5 % which makes seawater splitting promising and economically feasible., Authors from IREC acknowledge Generalitat de Catalunya for financial support through the CERCA Programme. J.R.M. acknowledges Generalitat de Catalunya for financial support through the CERCA Programme, M2E (2017 SGR 1246). IREC and ICN2 also acknowledge additional support by the European Regional Development Funds (ERDF, FEDER) and by MINECO coordinated project ENE2017-85087-C3. ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. ICN2 acknowledges funding from Generalitat de Catalunya SEV-2017-0706). J.L. and X.G. are grateful to projects MICINN/FEDER RTI2018-093996-B−C31 and Generalitat de Catalunya 2017 SGR 128. X.G. is grateful to Generalitat de Catalunya for PhD grant 2017 FI_B 00137. JL is a Serra Húnter fellow and is grateful to ICREA Academia program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular Engineering to Tune the Ligand Environment of Atomically Dispersed Nickel for Efficient Alcohol Electrochemical Oxidation

  • Liang, Zhifu
  • Jiang, Daochuan
  • Wang, Xiang
  • Shakouri, Mohsen
  • Zhang, Ting
  • Li, Zhongjun
  • Tang, Peng-Yi
  • Llorca, Jordi
  • Liu, Lijia
  • Yuan, Yupeng
  • Heggen, Marc
  • Dunin-Borkowski, Rafal E.
  • Morante, Joan Ramón
  • Cabot, Andreu
  • Arbiol, Jordi
Atomically dispersed metals maximize the number of catalytic sites and enhance their activity. However, their challenging synthesis and characterization strongly complicates their optimization. Here, the aim is to demonstrate that tuning the electronic environment of atomically dispersed metal catalysts through the modification of their edge coordination is an effective strategy to maximize their performance. This article focuses on optimizing nickel-based electrocatalysts toward alcohol electrooxidation in alkaline solution. A new organic framework with atomically dispersed nickel is first developed. The coordination environment of nickel within this framework is modified through the addition of carbonyl (CO) groups. The authors then demonstrate that such nickel-based organic frameworks, combined with carbon nanotubes, exhibit outstanding catalytic activity and durability toward the oxidation of methanol (CHOH), ethanol (CHCHOH), and benzyl alcohol (CHCHOH); the smaller molecule exhibits higher catalytic performance. These outstanding electrocatalytic activities for alcohol electrooxidation are attributed to the presence of the carbonyl group in the ligand chemical environment, which enhances the adsorption for alcohol, as revealed by density functional theory calculations. The work not only introduces a new atomically dispersed Ni-based catalyst, but also demonstrates a new strategy for designing and engineering high-performance catalysts through the tuning of their chemical environment., ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme /Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. Z.L. acknowledges funding from MINECO SO-FPT Ph.D. grant (SEV-2013-0295-17-1). This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 823717-ESTEEM3. The present work is supported by the European Regional Development Fund and by the Spanish MINECO through the projects ENE2016-77798-C4-3-R, ENE2017-85087-C3, and project NANOGEN (PID2020-116093RB-C43). X.W. and T.Z. thank the China Scholarship Council for the scholarship support. P. Tang acknowledges the Humboldt Research Fellowship. Authors acknowledge funding from Generalitat de Catalunya 2017SGR327 and 2017SGR1246. L.L. acknowledges the support from Natural Sciences and Engineering Research Council of Canada (NSERC, DG RGPIN-2020-06675). J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128, and to ICREA Academia program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

NbSe2 Meets C2N: A 2D-2D Heterostructure Catalysts as Multifunctional Polysulfide Mediator in Ultra-Long-Life Lithium–Sulfur Batteries

  • Yang, Dawei
  • Liang, Zhifu
  • Zhang, Chaoqi
  • Biendicho, Jordi Jacas
  • Botifoll, Marc
  • Spadaro, Maria Chiara
  • Chen, Qiulin
  • Li, Mengyao
  • Ramón, Alberto
  • Ostovari Moghaddam, Ahmad
  • Llorca, Jordi
  • Wang, Jiaao
  • Ramon Morante, Joan
  • Arbiol, Jordi
  • Chou, Shu-Lei
  • Cabot, Andreu
The shuttle effect and sluggish conversion kinetics of lithium polysulfides (LiPS) hamper the practical application of lithium–sulfur batteries (LSBs). Toward overcoming these limitations, herein an in situ grown CN@NbSe heterostructure is presented with remarkable specific surface area, as a Li–S catalyst and LiPS absorber. Density functional theory (DFT) calculations and experimental results comprehensively demonstrate that CN@NbSe is characterized by a suitable electronic structure and charge rearrangement that strongly accelerates the LiPS electrocatalytic conversion. In addition, heterostructured CN@NbSe strongly interacts with LiPS species, confining them at the cathode. As a result, LSBs cathodes based on CN@NbSe/S exhibit a high initial capacity of 1545 mAh g at 0.1 C. Even more excitingly, CN@NbSe/S cathodes are characterized by impressive cycling stability with only 0.012% capacity decay per cycle after 2000 cycles at 3 C. Even at a sulfur loading of 5.6 mg cm, a high areal capacity of 5.65 mAh cm is delivered. These results demonstrate that CN@NbSe heterostructures can act as multifunctional polysulfide mediators to chemically adsorb LiPS, accelerate Li-ion diffusion, chemically catalyze LiPS conversion, and lower the energy barrier for LiS precipitation/decomposition, realizing the “adsorption-diffusion-conversion” of polysulfides., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economíay Competitividad through the project SEHTOP, ENE2016- 77798-C4-3-R, and ENE2017-85087-C3. D.Y., C.Z. and M.L. thank the China Scholarship Council for the scholarship support (CSC 201806090276, CSC 201706650011 and CSC 201706890005, respectively). Z.L. acknowledges funding from MINECO SO FPI Ph.D. grant (SEV-2013-0295-17-1). The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 acknowledges the support from the Severo Ochoa Programme (MINECO, Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128, and to ICREA Academia program. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. M.C.S. has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No 754510 (PROBIST). M.B. acknowledges support from SUR Generalitat de Catalunya and the EU Social Fund; project ref. 2020 FI 00103.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

PbS-Pb-Cu xS Composites for Thermoelectric Application

  • Li, Mengyao
  • Liu, Yu
  • Zhang, Yu
  • Han, Xu
  • Xiao, Ke
  • Nabahat, Mehran
  • Arbiol, Jordi
  • Llorca, Jordi
  • Ibáñez, María
  • Cabot, Andreu
Composite materials offer numerous advantages in a wide range of applications, including thermoelectrics. Here, semiconductor-metal composites are produced by just blending nanoparticles of a sulfide semiconductor obtained in aqueous solution and at room temperature with a metallic Cu powder. The obtained blend is annealed in a reducing atmosphere and afterward consolidated into dense polycrystalline pellets through spark plasma sintering (SPS). We observe that, during the annealing process, the presence of metallic copper activates a partial reduction of the PbS, resulting in the formation of PbS-Pb-CuxS composites. The presence of metallic lead during the SPS process habilitates the liquid-phase sintering of the composite. Besides, by comparing the transport properties of PbS, the PbS-Pb-CuxS composites, and PbS-CuxS composites obtained by blending PbS and CuxS nanoparticles, we demonstrate that the presence of metallic lead decisively contributes to a strong increase of the charge carrier concentration through spillover of charge carriers enabled by the low work function of lead. The increase in charge carrier concentration translates into much higher electrical conductivities and moderately lower Seebeck coefficients. These properties translate into power factors up to 2.1 mW m-1 K-2 at ambient temperature, well above those of PbS and PbS + CuxS. Additionally, the presence of multiple phases in the final composite results in a notable decrease in the lattice thermal conductivity. Overall, the introduction of metallic copper in the initial blend results in a significant improvement of the thermoelectric performance of PbS, reaching a dimensionless thermoelectric figure of merit ZT = 1.1 at 750 K, which represents about a 400% increase over bare PbS. Besides, an average ZTave = 0.72 in the temperature range 320-773 K is demonstrated., This work was supported by the European Regional Development Funds. M.L., Y.Z., X.H., and K.X. thank the China Scholarship Council for scholarship support. M. I. has been financially supported by IST Austria and the Werner Siemens Foundation. Y.L. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 754411. J.L. is a Serra Húnter fellow and is grateful to ICREA Academia program and projects MICINN/FEDER RTI2018-093996-B-C31 and GC 2017 SGR 128. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project NANOGEN (PID2020-116093RB-C43). ICN2 was supported by the Severo Ochoa program from Spanish MINECO (grant no. SEV-2017-0706) and was funded by the CERCA Programme/Generalitat de Catalunya. X.H. thanks China Scholarship Council for scholarship support (201804910551). Part of the present work was performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photodehydrogenation of ethanol over cu2o/tio2 heterostructures

  • Xing, Congcong
  • Zhang, Yu
  • Liu, Yongpeng
  • Wang, Xiang
  • Li, Junshan
  • Martínez-Alanis, Paulina R.
  • Spadaro, Maria Chiara
  • Guardia, Pablo
  • Arbiol, Jordi
  • Llorca, Jordi
  • Cabot, Andreu
The photodehydrogenation of ethanol is a sustainable and potentially cost-effective strategy to produce hydrogen and acetaldehyde from renewable resources. The optimization of this process requires the use of highly active, stable and selective photocatalytic materials based on abundant elements and the proper adjustment of the reaction conditions, including temperature. In this work, CuO-TiO type-II heterojunctions with different CuO amounts are obtained by a one-pot hydrothermal method. The structural and chemical properties of the produced materials and their activity toward ethanol photodehydrogenation under UV and visible light illumination are evaluated. The CuO-TiO photocatalysts exhibit a high selectivity toward acetaldehyde production and up to tenfold higher hydrogen evolution rates compared to bare TiO . We further discern here the influence of temperature and visible light absorption on the photocatalytic performance. Our results point toward the combination of energy sources in thermo-photocatalytic reactors as an efficient strategy for solar energy conversion., This work was supported by the MINECO project COMBENERGY (PID2019-105490RB-C32) and MICINN/FEDER project RTI2018-093996-B-C31. J.A. and M.C.S. thank funding from GC 2017 SGR 327 and MINECO project (ENE2017-85087-C3). ICN2 thanks supporting from the Severo Ochoa Program (MINECO, No. SEV-2013-0295) and the CERCA Program/Generalitat de Catalunya. Y.Z., C.X., and X.W. acknowledge the China Scholarship Council (CSC) for scholarship support. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. J.L. is a Serra Hunter fellow and is grateful to GC 2017 SGR 128 and ICREA Academia program. Y.L. thank the Swiss National Science Foundation (SNF) for funding under the Ambizione Energy (No. PZENP2_166871). M.C.S. has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 754510 (PROBIST) and the Severo Ochoa programme.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tubular CoFeP@CN as a Mott–Schottky Catalyst with Multiple Adsorption Sites for Robust Lithium−Sulfur Batteries

  • Zhang, Chaoqi
  • Du, Ruifeng
  • Biendicho, Jordi Jacas
  • Yi, Mingjie
  • Xiao, Ke
  • Yang, Dawei
  • Zhang, Ting
  • Wang, Xiang
  • Arbiol, Jordi
  • Llorca, Jordi
  • Zhou, Yingtang
  • Morante, Joan Ramón
  • Cabot, Andreu
The shuttle effect and the sluggish reaction kinetics of lithium polysulfide (LiPS) seriously compromise the performance of lithium–sulfur batteries (LSBs). To overcome these limitations and enable the fabrication of robust LSBs, here the use of a Mott–Schottky catalyst based on bimetallic phosphide CoFeP nanocrystals supported on carbon nitride tubular nanostructures as sulfur hosts is proposed. Theoretical calculations and experimental data confirm that CoFeP@CN composites are characterized by a suitable electronic structure and charge rearrangement that allows them to act as a Mott–Schottky catalyst to accelerate LiPS conversion. In addition, the tubular geometry of CoFeP@CN composites facilitates the diffusion of Li ions, accommodates volume change during the reaction, and offers abundant lithiophilic/sulfiphilic sites to effectively trap soluble LiPS. Therefore, S@CoFeP@CN electrodes deliver a superior rate performance of 630 mAh g at 5 C, and remarkable cycling stability with 90.44% capacity retention over 700 cycles. Coin cells with high sulfur loading, 4.1 mg cm, and pouch cells with 0.1 Ah capacities are further produced to validate their superior cycling stability. In addition, it is demonstrated here that CoFeP@CN hosts greatly alleviate the often overlooked issues of low energy efficiency and serious self-discharging in LSBs., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project ENE2016-77798-C4-3-R, and ENE2017-85087-C3. C.Q.Z., R.F.D., K.X., D.W.Y., T.Z., and X.W. thank the China Scholarship Council for the scholarship support. The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 acknowledges the support from the Severo Ochoa Programme (MINECO, grant no. SEV-2017-0706) and was funded by the CERCA Programme/Generalitat de Catalunya. J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128 and to ICREA Academia program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Activating the lattice oxygen oxidation mechanism in amorphous molybdenum cobalt oxide nanosheets for water oxidation

  • Wang, Xiang
  • Xing, Congcong
  • Liang, Zhifu
  • Guardia, Pablo
  • Han, Xu
  • Zuo, Yong
  • Li, Junshan
  • Cabot, Andreu
The cost-effective deployment of several key energy technologies, such as water electrolysis, CO2 electroreduction and metal-air batteries, relies on the design and engineering of cost-effective catalysts able to accelerate the sluggish kinetics of the oxygen evolution reaction (OER). Herein, we detail the synthesis, processing and performance of a cobalt oxide-based OER electrocatalyst with optimized composition, atomic arrangement and nano/microstructure. We demonstrate that doping the cobalt oxide with a higher electronegativity element such as molybdenum promotes the participation of lattice oxygen in the OER. Besides, the processing of the catalyst at moderate temperatures results in an amorphous material with extended compositional and atomic arrangement versatility. Additionally, the catalyst, which is produced through an ion etching assisted strategy using ZIF-67 as a template, displays a highly porous structure in the form of amorphous ultrathin MoCoxOy nanosheets that maximize interaction with the media and facilitate the transport of ions through the electrolyte. After optimizing the molybdenum concentration and structural parameters, the best MoCoxOy catalysts exhibited a low overpotential of 282 mV at 10 mA cm-2 with a reduced Tafel slope of 60.6 mV dec-1, and excellent stability with more than 60 h operation without significant activity decay., This work was supported by the European Regional Development Funds and by the Spanish MINECO through the projects ENE2016-77798-C4-3-R, and NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/. X. W., C. X., X. H. and R. D. thank the China Scholarship Council (CSC) for the scholarship support. Authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 acknowledges the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Z. L. acknowledges funding from MINECO SO-FPT PhD grant (SEV-2013-0295-17-1). J. L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128 and ICREA Academia program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A High Conductivity 1D π–d Conjugated Metal–Organic Framework with Efficient Polysulfide Trapping-Diffusion-Catalysis in Lithium–Sulfur Batteries

  • Yang, Dawei
  • Liang, Zhifu
  • Tang, Peng-Yi
  • Zhang, Chaoqi
  • Tang, Mingxue
  • Li, Qizhen
  • Jacas Biendicho, Jordi
  • Li, Junshan
  • Heggen, Marc
  • Dunin-Borkowski, Rafal E.
  • Xu, Ming
  • Llorca, Jordi
  • Arbiol, Jordi
  • Morante, Joan Ramón
  • Chou, Shu-Lei
  • Cabot, Andreu
The shuttling behavior and sluggish conversion kinetics of the intermediate lithium polysulfides (LiPS) represent the main obstructions to the practical application of lithium–sulfur batteries (LSBs). Herein, a 1D π–d conjugated metal–organic framework (MOF), Ni-MOF-1D, is presented as an efficient sulfur host to overcome these limitations. Experimental results and density functional theory calculations demonstrate that Ni-MOF-1D is characterized by a remarkable binding strength for trapping soluble LiPS species. Ni-MOF-1D also acts as an effective catalyst for S reduction during the discharge process and LiS oxidation during the charging process. In addition, the delocalization of electrons in the π–d system of Ni-MOF-1D provides a superior electrical conductivity to improve electron transfer. Thus, cathodes based on Ni-MOF-1D enable LSBs with excellent performance, for example, impressive cycling stability with over 82% capacity retention over 1000 cycles at 3 C, superior rate performance of 575 mAh g at 8 C, and a high areal capacity of 6.63 mAh cm under raised sulfur loading of 6.7 mg cm. The strategies and advantages here demonstrated can be extended to a broader range of π–d conjugated MOFs materials, which the authors believe have a high potential as sulfur hosts in LSBs., D.Y., Z.L., and P.T. contributed equally to this work. This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the projects ENE2016-77798-C4-3-R and PID2020-116093RB-C43. D.Y. and C.Z. thank the China Scholarship Council for the scholarship support. M.T. thanks the financial support from the National Natural Science Foundation of China (Grants 21974007 and U1930401). Z.L. acknowledges funding from MINECO SO FPI Ph.D. Grant (SEV-2013-0295-17-1). P.T. acknowledges the Humboldt Research Fellowship. Authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 acknowledges the support from the Severo Ochoa Programme (MINECO, Grant no. SEV-2017-0706). IREC and ICN2 are both funded by the CERCA Programme/Generalitat de Catalunya. This work was supported by Fundamental Research Funds for the Central Universities (buctrc202112). J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128 and to ICREA Academia program. This project received funding from the European Union's Horizon 2020 Research and Innovation Programme under Grant agreement no. 823717 – ESTEEM3. Part of the present work was performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular engineering to introduce carbonyl between nickel salophen active sites to enhance electrochemical CO2 reduction to methanol

  • Liang, Zhifu
  • Wang, Jianghao
  • Tang, Peng-Yi
  • Tang, Weiqiang
  • Liu, Lijia
  • Shakouri, Mohsen
  • Wang, Xiang
  • Llorca, Jordi
  • Zhao, Shuangliang
  • Heggen, Marc
  • Dunin-Borkowski, Rafal E.
  • Cabot, Andreu
  • Wu, Hao Bin
  • Arbiol, Jordi
The electrochemical reduction of CO to methanol is a potentially cost-effective strategy to reduce the concentration of this greenhouse gas while at the same time producing a value-added chemical. Herein, we detail a highly efficient 2D nickel organic framework containing a large density of highly dispersed salophen NiNO active sites toward electrochemical CORR to methanol. By tuning the ligand environment of the salophen NiNO, the electrocatalytic activity of the material toward CO reduction can be significantly improved. We prove that by introducing a carbonyl group at the ligand environment of the Ni active sites, the electrochemical CO reduction activity is highly promoted and its product selectivity reaches a Faradaic efficiency of 27% toward the production of methanol at − 0.9 V vs RHE. The salophen-based π-d conjugated metal-organic framework presented here thus provides the best performance toward CO reduction to methanol among the previously developed nickel-based electrocatalysts., ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. Z. Liang acknowledges funding from MINECO SO-FPT PhD grant (SEV-2013-0295-17-1). This project has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement No 823717-ESTEEM3. The present work is supported by the I+D+I projects PID2019-105490RB-C32 and NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. X. Wang thanks the China Scholarship Council for the scholarship support. P. Tang acknowledges the Humboldt Research Fellowship. Authors acknowledge funding from Generalitat de Catalunya 2017SGR327 and 2017SGR1246. L. L acknowledges the support from Natural Sciences and Engineering Research Council Canada (NSERC, DG RGPIN-2020-06675). J. Llorca is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128 and to ICREA Academia Program. XAFS measurements were performed at the Canadian Light Source, a national research facility at the University of Saskatchewan, which is supported by the Canada Foundation for Innovation (CFI), the Natural Sciences and Engineering Research Council (NSERC), the National Research Council (NRC), the Canadian Institutes of Health Research (CIHR), the Government of Saskatchewan, and the University of Saskatchewan. W. Tang acknowledges the Chinese Postdoctoral Science Foundation (Nos. 2021M691008).This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phase Engineering of Defective Copper Selenide toward Robust Lithium-Sulfur Batteries

  • Yang, Dawei
  • Li, Mengyao
  • Zheng, Xuejiao
  • Han, Xu
  • Zhang, Chaoqi
  • Jacas Biendicho, Jordi
  • Llorca, Jordi
  • Wang, Jiaao
  • Hao, Hongchang
  • Li, Junshan
  • Henkelman, Graeme
  • Arbiol, Jordi
  • Morante, Joan Ramón
  • Mitlin, David
  • Chou, Shu-Lei
  • Cabot, Andreu
Título del postprint: Synergistically Enhancement of Electrochemical Kinetics by Phase Engineering of Defective Copper Selenide toward Robust Lithium-Sulfur Batteries, The shuttling of soluble lithium polysulfides (LiPS) and the sluggish Li-S conversion kinetics are two main barriers toward the practical application of lithium-sulfur batteries (LSBs). Herein, we propose the addition of copper selenide nanoparticles at the cathode to trap LiPS and accelerate the Li-S reaction kinetics. Using both computational and experimental results, we demonstrate the crystal phase and concentration of copper vacancies to control the electronic structure of the copper selenide, its affinity toward LiPS chemisorption, and its electrical conductivity. The adjustment of the defect density also allows for tuning the electrochemically active sites for the catalytic conversion of polysulfide. The optimized S/Cu1.8Se cathode efficiently promotes and stabilizes the sulfur electrochemistry, thus improving significantly the LSB performance, including an outstanding cyclability over 1000 cycles at 3 C with a capacity fading rate of just 0.029% per cycle, a superb rate capability up to 5 C, and a high areal capacity of 6.07 mAh cm-2 under high sulfur loading. Overall, the present work proposes a crystal phase and defect engineering strategy toward fast and durable sulfur electrochemistry, demonstrating great potential in developing practical LSBs., The authors thank the support from the projects ENE2016-77798-C4-3-R and NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. D.Y., M.L., X.H., and C.Z. thank the China Scholarship Council for the scholarship support. ICN2 acknowledges the support from the Severo Ochoa Programme (MINECO, grant no. SEV-2017-0706). IREC and ICN2 are both funded by the CERCA Program/Generalitat de Catalunya. This project received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 823717-ESTEEM3. Calculations at UT Austin were supported by the Welch Foundation (F-1841) and the Texas Advanced Computing Center. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128, and to the ICREA Academia program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Experimental control of a methanol catalytic membrane reformer

  • Cifuentes López, Alejandro
  • Serra-Prat, María
  • Torres, Ricardo
  • Llorca, Jordi
Trabajo presentado en el 8th Symposium on Hydrogen, Fuel Cells and Advanced Batteries, celebrado en Buenos Aires (Argentina), del 10 al 13 de julio de 2022, On-site and on-demand hydrogen production from liquids has been gaining more attention in recent years. For that purpose, it is recommended to use low temperature processes and compact reformers which make methanol a good candidate because methanol does not involve the cleavage of C-C bonds and the reforming can be done at low temperature [1]. Catalytic membrane reactors are a good choice for a compact reforming unit since they have the production, separation and purification phase in the same reactor volume, This work has been funded by projects MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128 and RTI2018- 096001-B-C32. AC grateful to Generalitat de Catalunya and Addlink Software Científico S.L. for Industrial Doctorate grant 063/2018. JL is a Serra Húnter Fellow and is grateful to ICREA Academia program. We are grateful to Vicente Roda, Alejandro Martinez and Isabel Serrano (EEBE) for technical assistance.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Palladium Hydride on C2N to Boost Formate Oxidation

  • Wang, Xiang
  • Montaña-Mora, Guillem
  • Han, Xu
  • Yu, Jing
  • Qi, Xueqiang
  • Arbiol, Jordi
  • Liang, Zhifu
  • Cabot, Andreu
  • Li, Junshan
The lack of electrocatalysts for the formate oxidation reaction (FOR) hampers the deployment of direct formate fuel cells (DFFCs). To overcome this limitation, herein, we detail the production of palladium hydride particles supported on C2N (PdH0.58@C2N) via a facile method. PdH0.58@C2N displays excellent FOR performance, reaching current densities up to 5.6 A·mgPd–1 and stable cycling and chronoamperometric operation. The Pd lattice expands due to the hydrogen intercalation. Besides, an electronic redistribution associated with the distinct electronegativity of Pd and H is observed. Both phenomena modify the electron energy levels, enhancing the activity and stability of the composite catalyst. More specifically, differential functional theory calculations show H intercalation to downshift the Pd d-band center in Pd0.58@C2N, weakening adsorbate binding and accelerating the FOR rate-determining step., The authors acknowledge funding from Generalitat de Catalunya 2021 SGR 01581 and the projects COMBENERGY (PID2019-105490RB-C32) from the Spanish Ministerio de Ciencia e Innovación, ENE2016-77798-C4-3-R, and NANOGEN (PID2020-116093RB-C43) funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe,” by the “European Union.” X.W., X.H., and R.D. thank the China Scholarship Council (CSC) for the scholarship support. The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 acknowledges the Severo Ochoa program from Spanish MINECO (grant no. SEV-2017-0706). IREC and ICN2 are funded by the CERCA Programme/Generalitat de Catalunya. Z.L. acknowledges funding from MINECO SO-FPT PhD grant (SEV-2013-0295-17-1). Li is grateful to project No. 22NSFSC0966 provided by the Science and Technology Department of Sichuan Province. J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128, and ICREA Academia program., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

PbS-Pb-Cu xS Composites for Thermoelectric Application

  • Li, Mengyao
  • Liu, Yu
  • Zhang, Yu|||0009-0006-6836-9500
  • Han, Xu
  • Xiao, Ke
  • Nabahat, Mehran
  • Arbiol, Jordi
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
  • Alzate Ibáñez, Angélica María
  • Cabot, Andreu
Composite materials offer numerous advantages in a wide range of applications, including thermoelectrics. Here, semiconductor-metal composites are produced by just blending nanoparticles of a sulfide semiconductor obtained in aqueous solution and at room temperature with a metallic Cu powder. The obtained blend is annealed in a reducing atmosphere and afterward consolidated into dense polycrystalline pellets through spark plasma sintering (SPS). We observe that, during the annealing process, the presence of metallic copper activates a partial reduction of the PbS, resulting in the formation of PbS-Pb- CuxS composites. The presence of metallic lead during the SPS process habilitates the liquid-phase sintering of the composite. Besides, by comparing the transport properties of PbS, the PbS-Pb-CuxS composites, and PbS-CuxS composites obtained by blending PbS and CuxS nanoparticles, we demonstrate that the presence of metallic lead decisively contributes to a strong increase of the charge carrier concentration through spillover of charge carriers enabled by the low work function of lead. The increase in charge carrier concentration translates into much higher electrical conductivities and moderately lower Seebeck coefficients. These properties translate into power factors up to 2.1 mW m-1 K-2 at ambient temperature, well above those of PbS and PbS + CuxS. Additionally, the presence of multiple phases in the final composite results in a notable decrease in the lattice thermal conductivity. Overall, the introduction of metallic copper in the initial blend results in a significant improvement of the thermoelectric performance of PbS, reaching a dimensionless thermoelectric figure of merit ZT = 1.1 at 750 K, which represents about a 400% increase over bare PbS. Besides, an average ZTave = 0.72 in the temperature range 320-773 K is demonstrated., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Modelling and simulation of catalytic ammonia decomposition over Ni-Ru deposited on 3D-printed CeO2

  • Lucentini, Ilaria|||0000-0003-1311-9062
  • García Colli, Germán
  • Luzi, Carlos Daniel
  • Serrano Carreño, M. Isabel|||0000-0002-4996-9280
  • Soler Turu, Lluís|||0000-0003-1591-3366
  • Jiménez Divins, Nuria|||0000-0001-6010-5419
  • Martínez, Osvaldo Miguel
  • Llorca Piqué, Jordi|||0000-0002-7447-9582
3D-printed ceria structures have been prepared by robocasting, without using any additive, and impregnated with different amounts of Ni and Ru, characterized and tested for the catalytic decomposition of ammonia in a fixed bed reactor. The best catalytic performance has been achieved with an active phase of 0.5Ni0.1Ru (w/w %). A kinetic expression has been obtained using a crushed catalytic structure, which has been employed in a 1D model to simulate the behaviour of the Ni-Ru impregnated 3D-printed ceria structures. The results have been compared with the experimental data to validate the proposed model. A series of simulations have been performed to determine the relationship between the geometric parameters of the 3D-printed structures and their catalytic performance in the ammonia decomposition, in order to optimize the catalytic structure with the aim of supplying the hydrogen produced to a PEM-type fuel cell., Peer Reviewed, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

PbS-Pb-Cu xS Composites for Thermoelectric Application

  • Li, Mengyao
  • Liu, Yu
  • Zhang, Yu
  • Han, Xu
  • Xiao, Ke
  • Nabahat, Mehran
  • Arbiol, Jordi
  • Llorca Piqué, Jordi
  • Alzate Ibáñez, Angélica María
  • Cabot, Andreu
Composite materials offer numerous advantages in a wide range of applications, including thermoelectrics. Here, semiconductor-metal composites are produced by just blending nanoparticles of a sulfide semiconductor obtained in aqueous solution and at room temperature with a metallic Cu powder. The obtained blend is annealed in a reducing atmosphere and afterward consolidated into dense polycrystalline pellets through spark plasma sintering (SPS). We observe that, during the annealing process, the presence of metallic copper activates a partial reduction of the PbS, resulting in the formation of PbS-Pb- CuxS composites. The presence of metallic lead during the SPS process habilitates the liquid-phase sintering of the composite. Besides, by comparing the transport properties of PbS, the PbS-Pb-CuxS composites, and PbS-CuxS composites obtained by blending PbS and CuxS nanoparticles, we demonstrate that the presence of metallic lead decisively contributes to a strong increase of the charge carrier concentration through spillover of charge carriers enabled by the low work function of lead. The increase in charge carrier concentration translates into much higher electrical conductivities and moderately lower Seebeck coefficients. These properties translate into power factors up to 2.1 mW m-1 K-2 at ambient temperature, well above those of PbS and PbS + CuxS. Additionally, the presence of multiple phases in the final composite results in a notable decrease in the lattice thermal conductivity. Overall, the introduction of metallic copper in the initial blend results in a significant improvement of the thermoelectric performance of PbS, reaching a dimensionless thermoelectric figure of merit ZT = 1.1 at 750 K, which represents about a 400% increase over bare PbS. Besides, an average ZTave = 0.72 in the temperature range 320-773 K is demonstrated., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modelling and simulation of catalytic ammonia decomposition over Ni-Ru deposited on 3D-printed CeO2

  • Lucentini, Ilaria
  • García Colli, Germán
  • Luzi, Carlos Daniel
  • Serrano Carreño, M. Isabel
  • Soler Turu, Lluís
  • Jiménez Divins, Nuria
  • Martínez, Osvaldo Miguel
  • Llorca Piqué, Jordi
3D-printed ceria structures have been prepared by robocasting, without using any additive, and impregnated with different amounts of Ni and Ru, characterized and tested for the catalytic decomposition of ammonia in a fixed bed reactor. The best catalytic performance has been achieved with an active phase of 0.5Ni0.1Ru (w/w %). A kinetic expression has been obtained using a crushed catalytic structure, which has been employed in a 1D model to simulate the behaviour of the Ni-Ru impregnated 3D-printed ceria structures. The results have been compared with the experimental data to validate the proposed model. A series of simulations have been performed to determine the relationship between the geometric parameters of the 3D-printed structures and their catalytic performance in the ammonia decomposition, in order to optimize the catalytic structure with the aim of supplying the hydrogen produced to a PEM-type fuel cell., Peer Reviewed, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant, Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tin selenide molecular precursor for the solution processing of thermoelectric materials and devices

  • Zhang, Yu|||0000-0002-0332-0013
  • Liu, Yu|||0000-0001-7313-6740
  • Xing, Congcong|||0000-0001-7674-6720
  • Zhang, Ting|||0000-0002-0317-9662
  • Li, Mengyao|||0000-0002-9082-7938
  • Pacios Pujadó, Merce|||0000-0002-3559-4561
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cadavid, Doris|||0000-0002-1376-6078
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
In the present work, we report a solution-based strategy to produce crystallographically textured SnSe bulk nanomaterials and printed layers with optimized thermoelectric performance in the direction normal to the substrate. Our strategy is based on the formulation of a molecular precursor that can be continuously decomposed to produce a SnSe powder or printed into predefined patterns. The precursor formulation and decomposition conditions are optimized to produce pure phase 2D SnSe nanoplates. The printed layer and the bulk material obtained after hot press displays a clear preferential orientation of the crystallographic domains, resulting in an ultralow thermal conductivity of 0.55 W m-1 K-1 in the direction normal to the substrate. Such textured nanomaterials present highly anisotropic properties with the best thermoelectric performance in plane, i.e., in the directions parallel to the substrate, which coincide with the crystallographic bc plane of SnSe. This is an unfortunate characteristic because thermoelectric devices are designed to create/harvest temperature gradients in the direction normal to the substrate. We further demonstrate that this limitation can be overcome with the introduction of small amounts of tellurium in the precursor. The presence of tellurium allows one to reduce the band gap and increase both the charge carrier concentration and the mobility, especially the cross plane, with a minimal decrease of the Seebeck coefficient. These effects translate into record out of plane ZT values at 800 K.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Monodisperse CoSn and NiSn nanoparticles supported on commercial carbon as anode for lithium- and potassium-ion batteries

  • Li, Junshan|||0000-0002-1482-1972
  • Xu, Xijun
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Han, Xu|||0000-0001-8319-8830
  • Zhang, Ting|||0000-0002-0317-9662
  • Zuo, Yong|||0000-0003-1564-467X
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Yang, Dawei|||0000-0002-3842-8286
  • Wang, Xiang
  • Luo, Zhishan|||0000-0002-0801-9238
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Liu, Jun|||0000-0001-5288-3042
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Monodisperse CoSn and NiSn nanoparticles were prepared in solution and supported on commercial carbon black. The obtained nanocomposites were applied as anodes for Li- and K-ion batteries. CoSn@C delivered stable average capacities of 850, 650, and 500 mAh g-1 at 0.2, 1.0, and 2.0 A g-1, respectively, well above those of commercial graphite anodes. The capacity of NiSn@C retained up to 575 mAh g-1 at a current of 1.0 A g-1 over 200 continuous cycles. Up to 74.5 and 69.7% pseudocapacitance contributions for Li-ion batteries were measured for CoSn@C and NiSn@C, respectively, at 1.0 mV s-1. CoSn@C was further tested in full-cell lithium-ion batteries with a LiFePO4 cathode to yield a stable capacity of 350 mAh g-1 at a rate of 0.2 A g-1. As electrode in K-ion batteries, CoSn@C composites presented a stable capacity of around 200 mAh g-1 at 0.2 A g-1 over 400 continuous cycles, and NiSn@C delivered a lower capacity of around 100 mAh g-1 over 300 cycles.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Selective methanol-to-formate electrocatalytic conversion on branched nickel carbide

  • Li, Junshan|||0000-0002-1482-1972
  • Wei, Ruilin
  • Wang, Xiang
  • Zuo, Yong|||0000-0003-1564-467X
  • Han, Xu|||0000-0001-8319-8830
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Yang, Yaoyue|||0000-0002-4573-9437
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Cui, Chunhua|||0000-0002-2774-1576
A methanol economy will be favored by the availability of low-cost catalysts able to selectively oxidize methanol to formate. This selective oxidation would allow extraction of the largest part of the fuel energy while concurrently producing a chemical with even higher commercial value than the fuel itself. Herein, we present a highly active methanol electrooxidation catalyst based on abundant elements and with an optimized structure to simultaneously maximize interaction with the electrolyte and mobility of charge carriers. In situ infrared spectroscopy combined with nuclear magnetic resonance spectroscopy showed that branched nickel carbide particles are the first catalyst determined to have nearly 100 % electrochemical conversion of methanol to formate without generating detectable CO as a byproduct. Electrochemical kinetics analysis revealed the optimized reaction conditions and the electrode delivered excellent activities. This work provides a straightforward and cost-efficient way for the conversion of organic small molecules and the first direct evidence of a selective formate reaction pathway.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Stability of Pd3Pb nanocubes during electrocatalytic thanol oxidation

  • Yu, Xiaoting|||0000-0003-0457-4047
  • Luo, Zhishan|||0000-0002-0801-9238
  • Zhang, Ting|||0000-0002-0317-9662
  • Tang, PengYi|||0000-0002-2306-095X
  • Li, Junshan|||0000-0002-1482-1972
  • Wang, Xiang
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Liu, Junfeng|||0000-0003-3164-6472
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Intermetallic PdPb nanocrystals with controlled size and cubic geometry exposing (100) facets are synthesized and tested as electrocatalysts for ethanol oxidation in alkaline media. We observe the ethanol oxidation activity and stability to be size-dependent. The 10 nm PdPb nanocrystals display the highest initial current densities, but after few hundred cycles, the current density of smaller nanocrystals becomes much larger. All of the catalysts exhibit a pronounced current decay during the first 500 s of continuous operation, which is associated with the accumulation of strongly adsorbed reaction intermediates, blocking reaction sites. These adsorbed species can be removed by cycling the catalysts or maintaining them at slightly higher potentials for a short period of time to oxidize and later reduce the Pd surface. Such simple cleaning processes, that can be performed during operation breaks without cell disassembly, is sufficient to effectively remove the poisoning species adsorbed on the surface and recover the electrocatalytic activity.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Phosphorous incorporation in Pd₂Sn alloys for electrocatalytic ethanol oxidation

  • Yu, Xiaoting|||0000-0003-0457-4047
  • Liu, Junfeng|||0000-0003-3164-6472
  • Li, Junshan|||0000-0002-1482-1972
  • Luo, Zhishan|||0000-0002-0801-9238
  • Zuo, Yong|||0000-0003-1564-467X
  • Xing, Congcong|||0000-0001-7674-6720
  • Llorca, Jordi|||0000-0002-7447-9582
  • Nasiou, Déspina
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Pan, Kai
  • Kleinhanns, Tobias
  • Xie, Ying
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Direct ethanol fuel cells (DEFCs) show a huge potential to power future electric vehicles and portable electronics, but their deployment is currently limited by the unavailability of proper electrocatalysis for the ethanol oxidation reaction (EOR). In this work, we engineer a new electrocatalyst by incorporating phosphorous into a palladium-tin alloy and demonstrate a significant performance improvement toward EOR. We first detail a synthetic method to produce Pd₂Sn:P nanocrystals that incorporate 35% of phosphorus. These nanoparticles are supported on carbon black and tested for EOR. Pd₂Sn:P/C catalysts exhibit mass current densities up to 5.03 A mg , well above those of Pd₂Sn/C, Pd₂P/C and Pd/C reference catalysts. Furthermore, a twofold lower Tafel slope and a much longer durability are revealed for the Pd₂Sn:P/C catalyst compared with Pd/C. The performance improvement is rationalized with the aid of density functional theory (DFT) calculations considering different phosphorous chemical environments. Depending on its oxidation state, surface phosphorus introduces sites with low energy OH adsorption and/or strongly influences the electronic structure of palladium and tin to facilitate the oxidation of the acetyl to acetic acid, which is considered the EOR rate limiting step. DFT calculations also points out that the durability improvement of Pd₂Sn:P/C catalyst is associated to the promotion of OH adsorption that accelerates the oxidation of intermediate poisoning CO, reactivating the catalyst surface.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A SnS2 molecular precursor for conformal nanostructured coatings

  • Zuo, Yong|||0000-0003-1564-467X
  • Li, Junshan|||0000-0002-1482-1972
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Du, Ruifeng
  • Zhang, Ting|||0000-0002-0317-9662
  • Wang, Xiang
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
We present a simple, versatile, and scalable procedure to produce SnS nanostructured layers based on an amine/thiol-based molecular ink. The ratios amine/thiol and Sn/S, and the reaction conditions, are systematically investigated to produce phase-pure SnS planar and conformal layers with a tremella-like SnS morphology. Such nanostructured layers are characterized by excellent photocurrent densities. The same strategy can be used to produce SnS-graphene composites by simply introducing graphene oxide (GO) into the initial solution. Conveniently, the solvent mixture is able to simultaneously dissolve the Sn and Se powders and reduce the GO. Furthermore, SnSSe ternary coatings and phase-pure SnSe can be easily produced by simply incorporating proper amounts of Se into the initial ink formulation. Finally, the potential of this precursor ink to produce gram-scale amounts of unsupported SnS is investigated._.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Photodehydrogenation of ethanol over CuO/TiO heterostructures

  • Xing, Congcong|||0000-0001-7674-6720
  • Zhang, Yu|||0000-0002-0332-0013
  • Liu, Yongpeng|||0000-0002-4544-4217
  • Wang, Xiang
  • Li, Junshan|||0000-0002-1482-1972
  • Martínez-Alanis, Paulina R.|||0000-0003-3675-4472
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Guardia, Pablo|||0000-0001-9076-4642
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The photodehydrogenation of ethanol is a sustainable and potentially cost-effective strategy to produce hydrogen and acetaldehyde from renewable resources. The optimization of this process requires the use of highly active, stable and selective photocatalytic materials based on abundant elements and the proper adjustment of the reaction conditions, including temperature. In this work, CuO-TiO type-II heterojunctions with different CuO amounts are obtained by a one-pot hydrothermal method. The structural and chemical properties of the produced materials and their activity toward ethanol photodehydrogenation under UV and visible light illumination are evaluated. The CuO-TiO photocatalysts exhibit a high selectivity toward acetaldehyde production and up to tenfold higher hydrogen evolution rates compared to bare TiO. We further discern here the influence of temperature and visible light absorption on the photocatalytic performance. Our results point toward the combination of energy sources in thermo-photocatalytic reactors as an efficient strategy for solar energy conversion.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced Thermoelectric Performance of n-Type BiSe Nanosheets through Sn Doping

  • Li, Mengyao|||0000-0002-9082-7938
  • Zhang, Yu|||0000-0002-0332-0013
  • Zhang, Ting|||0000-0002-0317-9662
  • Zuo, Yong|||0000-0003-1564-467X
  • Xiao, Ke
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Liu, Yu|||0000-0001-7313-6740
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The cost-effective conversion of low-grade heat into electricity using thermoelectric devices requires developing alternative materials and material processing technologies able to reduce the currently high device manufacturing costs. In this direction, thermoelectric materials that do not rely on rare or toxic elements such as tellurium or lead need to be produced using high-throughput technologies not involving high temperatures and long processes. BiSe is an obvious possible Te-free alternative to BiTe for ambient temperature thermoelectric applications, but its performance is still low for practical applications, and additional efforts toward finding proper dopants are required. Here, we report a scalable method to produce BiSe nanosheets at low synthesis temperatures. We studied the influence of different dopants on the thermoelectric properties of this material. Among the elements tested, we demonstrated that Sn doping resulted in the best performance. Sn incorporation resulted in a significant improvement to the BiSe Seebeck coefficient and a reduction in the thermal conductivity in the direction of the hot-press axis, resulting in an overall 60% improvement in the thermoelectric figure of merit of BiSe.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Molecular engineering to introduce carbonyl between nickel salophen active sites to enhance electrochemical CO2 reduction to methanol

  • Liang, Zhifu
  • Wang, Jianghao
  • Tang, PengYi|||0000-0002-2306-095X
  • Tang, Weiqiang|||0000-0002-7726-4130
  • Liu, Lijia
  • Shakouri, Mohsen
  • Wang, Xiang
  • Llorca, Jordi|||0000-0002-7447-9582
  • Zhao, Shuangliang
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Wu, Hao Bin
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
The electrochemical reduction of CO to methanol is a potentially cost-effective strategy to reduce the concentration of this greenhouse gas while at the same time producing a value-added chemical. Herein, we detail a highly efficient 2D nickel organic framework containing a large density of highly dispersed salophen NiNO active sites toward electrochemical CORR to methanol. By tuning the ligand environment of the salophen NiNO, the electrocatalytic activity of the material toward CO reduction can be significantly improved. We prove that by introducing a carbonyl group at the ligand environment of the Ni active sites, the electrochemical CO reduction activity is highly promoted and its product selectivity reaches a Faradaic efficiency of 27% toward the production of methanol at - 0.9 V vs RHE. The salophen-based π-d conjugated metal-organic framework presented here thus provides the best performance toward CO reduction to methanol among the previously developed nickel-based electrocatalysts.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Molecular engineering to tune the ligand environment of atomically dispersed nickel for efficient alcohol electrochemical oxidation

  • Liang, Zhifu
  • Jiang, Daochuan
  • Wang, Xiang
  • Shakouri, Mohsen
  • Zhang, Ting|||0000-0002-0317-9662
  • Li, Zhongjun
  • Tang, PengYi|||0000-0002-2306-095X
  • Llorca, Jordi|||0000-0002-7447-9582
  • Liu, Lijia
  • Yuan, Yupeng
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Atomically dispersed metals maximize the number of catalytic sites and enhance their activity. However, their challenging synthesis and characterization strongly complicates their optimization. Here, the aim is to demonstrate that tuning the electronic environment of atomically dispersed metal catalysts through the modification of their edge coordination is an effective strategy to maximize their performance. This article focuses on optimizing nickel-based electrocatalysts toward alcohol electrooxidation in alkaline solution. A new organic framework with atomically dispersed nickel is first developed. The coordination environment of nickel within this framework is modified through the addition of carbonyl (CO) groups. The authors then demonstrate that such nickel-based organic frameworks, combined with carbon nanotubes, exhibit outstanding catalytic activity and durability toward the oxidation of methanol (CHOH), ethanol (CHCHOH), and benzyl alcohol (CHCHOH); the smaller molecule exhibits higher catalytic performance. These outstanding electrocatalytic activities for alcohol electrooxidation are attributed to the presence of the carbonyl group in the ligand chemical environment, which enhances the adsorption for alcohol, as revealed by density functional theory calculations. The work not only introduces a new atomically dispersed Ni-based catalyst, but also demonstrates a new strategy for designing and engineering high-performance catalysts through the tuning of their chemical environment.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Phase engineering of defective copper selenide toward robust lithium-sulfur batteries, Synergistically enhancement of electrochemical kinetics by phase engineering of defective copper selenide toward robust lithium-sulfur Batteries

  • Yang, Dawei|||0000-0002-3842-8286
  • Li, Mengyao|||0000-0002-9082-7938
  • Zheng, Xuejiao
  • Han, Xu|||0000-0001-8319-8830
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Llorca, Jordi|||0000-0002-7447-9582
  • Wang, Jiaao|||0000-0002-4944-4951
  • Hao, Hongchang|||0000-0003-4190-4105
  • Li, Junshan|||0000-0002-1482-1972
  • Henkelman, Graeme|||0000-0002-0336-7153
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Mitlin, David
  • Chou, Shulei|||0000-0003-1155-6082
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The shuttling of soluble lithium polysulfides (LiPS) and the sluggish Li-S conversion kinetics are two main barriers toward the practical application of lithium-sulfur batteries (LSBs). Herein, we propose the addition of copper selenide nanoparticles at the cathode to trap LiPS and accelerate the Li-S reaction kinetics. Using both computational and experimental results, we demonstrate the crystal phase and concentration of copper vacancies to control the electronic structure of the copper selenide, its affinity toward LiPS chemisorption, and its electrical conductivity. The adjustment of the defect density also allows for tuning the electrochemically active sites for the catalytic conversion of polysulfide. The optimized S/Cu1.8Se cathode efficiently promotes and stabilizes the sulfur electrochemistry, thus improving significantly the LSB performance, including an outstanding cyclability over 1000 cycles at 3 C with a capacity fading rate of just 0.029% per cycle, a superb rate capability up to 5 C, and a high areal capacity of 6.07 mAh cm-2 under high sulfur loading. Overall, the present work proposes a crystal phase and defect engineering strategy toward fast and durable sulfur electrochemistry, demonstrating great potential in developing practical LSBs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Facing seawater splitting challenges by regeneration with Ni-Mo-Fe bifunctional electrocatalyst for hydrogen and oxygen evolution

  • Ros, Carles|||0000-0002-9148-2767
  • Murcia López, Sebastián|||0000-0002-3703-041X
  • Garcia, Xènia|||0000-0003-0795-4168
  • Rosado, Marcos|||0000-0003-3938-9132
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Morante, Joan Ramon|||0000-0002-4981-4633
Hydrogen, produced by water splitting, has been proposed as one of the main green energy vectors of the future if produced from renewable energy sources. However, to substitute fossil fuels, large amounts of pure water are necessary, scarce in many world regions. In this work, we fabricate efficient and earth-abundant electrodes, study the challenges of using real seawater, and propose an electrode regeneration method to face undesired salt deposition. Ni-Mo-Fe trimetallic electrocatalyst is deposited on non-expensive graphitic carbon felts both for hydrogen (HER) and oxygen evolution reactions (OER) in seawater and alkaline seawater. Cl pitting and the chlorine oxidation reaction are suppressed on these substrates and alkalinized electrolyte. Precipitations on the electrodes, mainly CaCO, originating from seawater-dissolved components have been studied, and a simple regeneration technique is proposed to rapidly dissolve undesired deposited CaCO in acidified seawater. Under alkaline conditions, Ni-Mo-Fe-based catalyst is found to reconfigure, under cathodic bias, into Ni-Mo-Fe alloy with a cubic crystalline structure and Ni : Fe(OH) redeposits whereas, under anodic bias, it is transformed into a follicular Ni:FeOOH structure. High productivities over 300 mA cm and voltages down to 1.59 V@10 mA cm for the overall water splitting reaction have been shown, and electrodes are found stable for over 24 h without decay in alkaline seawater conditions and with energy efficiency higher than 61.5 % which makes seawater splitting promising and economically feasible.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Nickel iron diselenide for highly efficient and selective electrocatalytic conversion of methanol to formate

  • Li, Junshan|||0000-0002-1482-1972
  • Xing, Congcong|||0000-0001-7674-6720
  • Zhang, Yu|||0000-0002-0332-0013
  • Zhang, Ting|||0000-0002-0317-9662
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Wu, Qianbao|||0000-0003-3236-8582
  • Yi, Yunan
  • He, Shenglan
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Cui, Chunhua|||0000-0002-2774-1576
The electro-oxidation of methanol to formate is an interesting example of the potential use of renewable energies to add value to a biosourced chemical commodity. Additionally, methanol electro-oxidation can replace the sluggish oxygen evolution reaction when coupled to hydrogen evolution or to the electroreduction of other biomass-derived intermediates. But the cost-effective realization of these reaction schemes requires the development of efficient and low-cost electrocatalysts. Here, a noble metal-free catalyst, Ni FeSe nanorods, with a high potential for an efficient and selective methanol conversion to formate is demonstrated. At its optimum composition, NiFeSe, this diselenide is able to produce 0.47 mmol cm h of formate at 50 mA cm with a Faradaic conversion efficiency of 99%. Additionally, this noble-metal-free catalyst is able to continuously work for over 50 000 s with a minimal loss of efficiency, delivering initial current densities above 50 mA cm and 2.2 A mg in a 1.0 m KOH electrolyte with 1.0 m methanol at 1.5 V versus reversible hydrogen electrode. This work demonstrates the highly efficient and selective methanol-to-formate conversion on Ni-based noble-metal-free catalysts, and more importantly it shows a very promising example to exploit the electrocatalytic conversion of biomass-derived chemicals.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Temperature-controlled switchable photochromism in solid materials

  • Julià López, Àlex|||0000-0002-3357-8349
  • Hernando, Jordi|||0000-0002-1126-4138
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Gonzalez Monje, Pablo|||0000-0001-8781-8574
  • Sedó Vegara, Josep|||0000-0002-4195-7541
  • Roscini, Claudio|||0000-0002-0157-8934
A novel strategy to achieve thermally switchable photochromism in solid materials is reported, which relies on the preparation of polymeric core-shell capsules containing solutions of photochromic dyes in acidic phase-change materials. Upon changing the phase (solid or liquid) of the encapsulated medium, one of the two photochromic states of the system is selectively stabilized on demand, allowing for reversible interconversion between direct and reverse photochromism when thermally scanning through the melting temperature of the phase-change material. This strategy, which does not require the addition of external agents or chemical modification of the dyes, proved to be general for different spiropyran photochromes and to be applicable to the fabrication of a variety of functional materials by simply embedding the capsules obtained into a solid matrix of choice.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tubular CoFeP@CN as a Mott-Schottky catalyst with multiple adsorption sites for robust lithium-sulfur batteries

  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Du, Ruifeng
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Yi, Mingjie
  • Xiao, Ke
  • Yang, Dawei|||0000-0002-3842-8286
  • Zhang, Ting|||0000-0002-0317-9662
  • Wang, Xiang
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The shuttle effect and the sluggish reaction kinetics of lithium polysulfide (LiPS) seriously compromise the performance of lithium-sulfur batteries (LSBs). To overcome these limitations and enable the fabrication of robust LSBs, here the use of a Mott-Schottky catalyst based on bimetallic phosphide CoFeP nanocrystals supported on carbon nitride tubular nanostructures as sulfur hosts is proposed. Theoretical calculations and experimental data confirm that CoFeP@CN composites are characterized by a suitable electronic structure and charge rearrangement that allows them to act as a Mott-Schottky catalyst to accelerate LiPS conversion. In addition, the tubular geometry of CoFeP@CN composites facilitates the diffusion of Li ions, accommodates volume change during the reaction, and offers abundant lithiophilic/sulfiphilic sites to effectively trap soluble LiPS. Therefore, S@CoFeP@CN electrodes deliver a superior rate performance of 630 mAh g at 5 C, and remarkable cycling stability with 90.44% capacity retention over 700 cycles. Coin cells with high sulfur loading, 4.1 mg cm, and pouch cells with 0.1 Ah capacities are further produced to validate their superior cycling stability. In addition, it is demonstrated here that CoFeP@CN hosts greatly alleviate the often overlooked issues of low energy efficiency and serious self-discharging in LSBs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A High conductivity 1D π-d conjugated metal-organic framework with efficient polysulfide trapping-diffusion-catalysis in lithium-sulfur batteries, A High conductivity one-dimensional π-d conjugated metal-organic framework with efficient polysulfide trapping-diffusion-catalysis in lithium-sulfur batteries

  • Yang, Dawei|||0000-0002-3842-8286
  • Liang, Zhifu
  • Tang, PengYi|||0000-0002-2306-095X
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Tang, Mingxue|||0000-0002-7282-4100
  • Li, Qizhen
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Li, Junshan|||0000-0002-1482-1972
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Xu, Ming
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Chou, Shulei|||0000-0003-1155-6082
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The shuttling behavior and sluggish conversion kinetics of the intermediate lithium polysulfides (LiPS) represent the main obstructions to the practical application of lithium-sulfur batteries (LSBs). Herein, a 1D π-d conjugated metal-organic framework (MOF), Ni-MOF-1D, is presented as an efficient sulfur host to overcome these limitations. Experimental results and density functional theory calculations demonstrate that Ni-MOF-1D is characterized by a remarkable binding strength for trapping soluble LiPS species. Ni-MOF-1D also acts as an effective catalyst for S reduction during the discharge process and LiS oxidation during the charging process. In addition, the delocalization of electrons in the π-d system of Ni-MOF-1D provides a superior electrical conductivity to improve electron transfer. Thus, cathodes based on Ni-MOF-1D enable LSBs with excellent performance, for example, impressive cycling stability with over 82% capacity retention over 1000 cycles at 3 C, superior rate performance of 575 mAh g at 8 C, and a high areal capacity of 6.63 mAh cm under raised sulfur loading of 6.7 mg cm. The strategies and advantages here demonstrated can be extended to a broader range of π-d conjugated MOFs materials, which the authors believe have a high potential as sulfur hosts in LSBs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Atomically dispersed Fe in a C2N based catalyst as a sulfur host for efficient lithium-sulfur batteries

  • Liang, Zhifu
  • Yang, Dawei|||0000-0002-3842-8286
  • Tang, PengYi|||0000-0002-2306-095X
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Zhang, Yi
  • Llorca, Jordi|||0000-0002-7447-9582
  • Wang, Xiang
  • Li, Junshan|||0000-0002-1482-1972
  • Heggen, Marc|||0000-0002-2646-0078
  • David, Jérémy|||0000-0003-3219-149X
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Lithium-sulfur batteries (LSBs) are considered to be one of the most promising next generation energy storage systems due to their high energy density and low material cost. However, there are still some challenges for the commercialization of LSBs, such as the sluggish redox reaction kinetics and the shuttle effect of lithium polysulfides (LiPS). Here a 2D layered organic material, CN, loaded with atomically dispersed iron as an effective sulfur host in LSBs is reported. X-ray absorption fine spectroscopy and density functional theory calculations prove the structure of the atomically dispersed Fe/CN catalyst. As a result, Fe/CN-based cathodes demonstrate significantly improved rate performance and long-term cycling stability. Fe/CN-based cathodes display initial capacities up to 1540 mAh g at 0.1 C and 678.7 mAh g at 5 C, while retaining 496.5 mAh g after 2600 cycles at 3 C with a decay rate as low as 0.013% per cycle. Even at a high sulfur loading of 3 mg cm, they deliver remarkable specific capacity retention of 587 mAh g after 500 cycles at 1 C. This work provides a rational structural design strategy for the development of high-performance cathodes based on atomically dispersed catalysts for LSBs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A direct Z-Scheme for the photocatalytic hydrogen production from a water ethanol mixture on CoTiO3/TiO2 heterostructures, A direct Z-scheme for the photocatalytic hydrogen production from ethanol dehydrogenation on CoTiO3/TiO2 heterostructures

  • Xing, Congcong|||0000-0001-7674-6720
  • Liu, Yongpeng|||0000-0002-4544-4217
  • Zhang, Yu|||0000-0002-0332-0013
  • Wang, Xiang
  • Guardia, Pablo|||0000-0001-9076-4642
  • Yao, Liang
  • Han, Xu|||0000-0001-8319-8830
  • Zhang, Ting|||0000-0002-0317-9662
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Soler, Lluís|||0000-0003-1591-3366
  • Chen, Yufen
  • Sivula, Kevin|||0000-0002-8458-0270
  • Guijarro, Néstor|||0000-0002-3277-8816
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Llorca, Jordi|||0000-0002-7447-9582
Photocatalytic H2 evolution from ethanol dehydrogenation is a convenient strategy to store solar energy in a highly valuable fuel with potential zero net CO2 balance. Herein, we report on the synthesis of CoTiO3/TiO2 composite catalysts with controlled amounts of highly distributed CoTiO3 nanodomains for photocatalytic ethanol dehydrogenation. We demonstrate these materials to provide outstanding hydrogen evolution rates under UV and visible illumination. The origin of this enhanced activity is extensively analyzed. In contrast to previous assumptions, UV-vis absorption spectra and ultraviolet photoelectron spectroscopy (UPS) prove CoTiO3/TiO2 heterostructures to have a type II band alignment, with the conduction band minimum of CoTiO3 below the H2/H+ energy level. Additional steady-state photoluminescence (PL) spectra, time-resolved PL spectra (TRPLS), and electrochemical characterization prove such heterostructures to result in enlarged lifetimes of the photogenerated charge carriers. These experimental evidence point toward a direct Z-scheme as the mechanism enabling the high photocatalytic activity of CoTiO3/TiO2 composites toward ethanol dehydrogenation. In addition, we probe small changes of temperature to strongly modify the photocatalytic activity of the materials tested, which could be used to further promote performance in a solar thermophotocatalytic reactor.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Effect of the annealing atmosphere on crystal phase and thermoelectric properties of copper sulfide

  • Li, Mengyao|||0000-0002-9082-7938
  • Liu, Yu|||0000-0001-7313-6740
  • Zhang, Yu|||0000-0002-0332-0013
  • Han, Xu|||0000-0001-8319-8830
  • Zhang, Ting|||0000-0002-0317-9662
  • Zuo, Yong|||0000-0003-1564-467X
  • Xie, Chenyang
  • Xiao, Ke
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Liu, Junfeng|||0000-0003-3164-6472
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Cu2-xS has become one of the most promising thermoelectric materials for application in the middle-high temperature range. Its advantages include the abundance, low cost, and safety of its elements and a high performance at relatively elevated temperatures. However, stability issues limit its operation current and temperature, thus calling for the optimization of the material performance in the middle temperature range. Here, we present a synthetic protocol for large scale production of covellite CuS nanoparticles at ambient temperature and atmosphere, and using water as a solvent. The crystal phase and stoichiometry of the particles are afterward tuned through an annealing process at a moderate temperature under inert or reducing atmosphere. While annealing under argon results in Cu1.8S nanopowder with a rhombohedral crystal phase, annealing in an atmosphere containing hydrogen leads to tetragonal Cu1.96S. High temperature X-ray diffraction analysis shows the material annealed in argon to transform to the cubic phase at ca. 400 K, while the material annealed in the presence of hydrogen undergoes two phase transitions, first to hexagonal and then to the cubic structure. The annealing atmosphere, temperature, and time allow adjustment of the density of copper vacancies and thus tuning of the charge carrier concentration and material transport properties. In this direction, the material annealed under Ar is characterized by higher electrical conductivities but lower Seebeck coefficients than the material annealed in the presence of hydrogen. By optimizing the charge carrier concentration through the annealing time, Cu2-xS with record figures of merit in the middle temperature range, up to 1.41 at 710 K, is obtained. We finally demonstrate that this strategy, based on a low-cost and scalable solution synthesis process, is also suitable for the production of high performance Cu2-xS layers using high throughput and cost-effective printing technologies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

NbSe2 meets C2N, a 2D-2D heterostructure catalysts as multifunctional polysulfide mediator in ultra-long-life lithium-sulfur batteries

  • Yang, Dawei|||0000-0002-3842-8286
  • Liang, Zhifu
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Botifoll, Marc|||0000-0002-4876-6393
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Chen, Qiulin
  • Li, Mengyao|||0000-0002-9082-7938
  • Ramon, Alberto
  • Moghaddam, Ahmad Ostovari
  • Llorca, Jordi|||0000-0002-7447-9582
  • Wang, Jiaao|||0000-0002-4944-4951
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Chou, Shulei|||0000-0003-1155-6082
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The shuttle effect and sluggish conversion kinetics of lithium polysulfides (LiPS) hamper the practical application of lithium-sulfur batteries (LSBs). Toward overcoming these limitations, herein an in situ grown CN@NbSe heterostructure is presented with remarkable specific surface area, as a Li-S catalyst and LiPS absorber. Density functional theory (DFT) calculations and experimental results comprehensively demonstrate that CN@NbSe is characterized by a suitable electronic structure and charge rearrangement that strongly accelerates the LiPS electrocatalytic conversion. In addition, heterostructured CN@NbSe strongly interacts with LiPS species, confining them at the cathode. As a result, LSBs cathodes based on CN@NbSe/S exhibit a high initial capacity of 1545 mAh g at 0.1 C. Even more excitingly, CN@NbSe/S cathodes are characterized by impressive cycling stability with only 0.012% capacity decay per cycle after 2000 cycles at 3 C. Even at a sulfur loading of 5.6 mg cm, a high areal capacity of 5.65 mAh cm is delivered. These results demonstrate that CN@NbSe heterostructures can act as multifunctional polysulfide mediators to chemically adsorb LiPS, accelerate Li-ion diffusion, chemically catalyze LiPS conversion, and lower the energy barrier for LiS precipitation/decomposition, realizing the "adsorption-diffusion-conversion" of polysulfides.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

ZnSe/N-doped carbon nanoreactor with multiple adsorption sites for stable lithium-sulfur batteries

  • Yang, Dawei|||0000-0002-3842-8286
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Han, Xu|||0000-0001-8319-8830
  • Liang, Zhifu
  • Du, Ruifeng
  • Li, Mengyao|||0000-0002-9082-7938
  • Li, Junshan|||0000-0002-1482-1972
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
To commercially realize the enormous potential of lithium-sulfur batteries (LSBs) several challenges remain to be overcome. At the cathode, the lithium polysulfide (LiPS) shuttle effect must be inhibited and the redox reaction kinetics need to be substantially promoted. In this direction, this work proposes a cathode material based on a transition-metal selenide (TMSe) as both adsorber and catalyst and a hollow nanoreactor architecture: ZnSe/N-doped hollow carbon (ZnSe/NHC). It is here demonstrated both experimentally and by means of density functional theory that this composite provides three key benefits to the LSBs cathode: (i) A highly effective trapping of LiPS due to the combination of sulfiphilic sites of ZnSe, lithiophilic sites of NHC, and the confinement effect of the cage-based structure; (ii) a redox kinetic improvement in part associated with the multiple adsorption sites that facilitate the Li diffusion; and (iii) an easier accommodation of the volume expansion preventing the cathode damage due to the hollow design. As a result, LSB cathodes based on S@ZnSe/NHC are characterized by high initial capacities, superior rate capability, and an excellent stability. Overall, this work not only demonstrates the large potential of TMSe as cathode materials in LSBs but also probes the nanoreactor design to be a highly suitable architecture to enhance cycle stability.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

PbS-Pb-Cu xS Composites for Thermoelectric Application

  • Li, Mengyao|||0000-0002-9082-7938
  • Liu, Yu|||0000-0001-7313-6740
  • Zhang, Yu|||0000-0002-0332-0013
  • Han, Xu|||0000-0001-8319-8830
  • Xiao, Ke
  • Nabahat, Mehran|||0000-0002-6109-5782
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Composite materials offer numerous advantages in a wide range of applications, including thermoelectrics. Here, semiconductor-metal composites are produced by just blending nanoparticles of a sulfide semiconductor obtained in aqueous solution and at room temperature with a metallic Cu powder. The obtained blend is annealed in a reducing atmosphere and afterward consolidated into dense polycrystalline pellets through spark plasma sintering (SPS). We observe that, during the annealing process, the presence of metallic copper activates a partial reduction of the PbS, resulting in the formation of PbS-Pb-CuxS composites. The presence of metallic lead during the SPS process habilitates the liquid-phase sintering of the composite. Besides, by comparing the transport properties of PbS, the PbS-Pb-CuxS composites, and PbS-CuxS composites obtained by blending PbS and CuxS nanoparticles, we demonstrate that the presence of metallic lead decisively contributes to a strong increase of the charge carrier concentration through spillover of charge carriers enabled by the low work function of lead. The increase in charge carrier concentration translates into much higher electrical conductivities and moderately lower Seebeck coefficients. These properties translate into power factors up to 2.1 mW m-1 K-2 at ambient temperature, well above those of PbS and PbS + CuxS. Additionally, the presence of multiple phases in the final composite results in a notable decrease in the lattice thermal conductivity. Overall, the introduction of metallic copper in the initial blend results in a significant improvement of the thermoelectric performance of PbS, reaching a dimensionless thermoelectric figure of merit ZT = 1.1 at 750 K, which represents about a 400% increase over bare PbS. Besides, an average ZTave = 0.72 in the temperature range 320-773 K is demonstrated.