Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 160
Encontrada(s) 2 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical Analysis of Oxygen Self‐Diffusion in Ultrathin CeO2 Layers at Low Temperatures

  • Neuderth, Paula
  • Hille, Pascal
  • Martí Sánchez, Sara
  • Mata, Maria de la
  • Coll, Mariona
  • Arbiol, Jordi
  • Eickhoff, Martin
An optical in situ strategy for the analysis of oxygen diffusion in ultrathin ceria layers with a thickness of 2–10 nm at temperatures between 50 and 200 °C is presented, which allows for the determination of diffusion coefficients. This method is based on the sensitivity of the photoluminescence (PL) intensity of InGaN nanowires to adsorbed oxygen. The oxygen diffusion through an ultrathin CeO2 coating deposited on the InGaN nanowires is monitored by analyzing the transient PL behavior of the InGaN nanowires, which responds to changes of the oxygen concentration in the environment when the corresponding oxygen concentration is established at the CeO2/InGaN interface due to diffusion through the coating. Quantitative evaluation of the oxygen diffusion in CeO2 based on a model considering Langmuir Adsorption and recombination yields a diffusion coefficient D of (2.55 ± 0.05) × 10−16 cm2 s−1 at a temperature of 100 °C. Temperature‐dependent measurements reveal an Arrhenius type behavior of D with an activation energy of (0.28 ± 0.04) eV. In contrast, no oxygen diffusion is detected for an ultrathin layer (≥5 nm) of Al2O3, which is known as a poor oxygen ion conductor within the analyzed temperature regime., We thank Herbert Over from the Institute of Physical Chemistry at the JLU Giessen for sharing his knowledge and experience and helping improve the manuscript. Financial support was provided by the DFG via the GrK (Research training group) 2204 “Substitute Materials for sustainable Energy Technologies.” M.C. thanks Ramón y Cajal program RYC‐2013‐12448. The authors also acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐ 2015‐0496) and MAT2017‐83169‐R AEI/FEDER,UE. This article is based upon work from COST Action MP1402 “Hooking together European research in atomic layer deposition (HERALD),” supported by COST (European Cooperation in Science and Technology). S.M.S. acknowledges funding from “Programa Internacional de Becas ‘la Caixa”’‐Severo Ochoa.” ICN2 members acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017‐85087‐C3. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, grant no. SEV‐2013‐0295) and is funded by the CERCA Programme /Generalitat de Catalunya. Part of this work was performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. This received funding from the European Union's Horizon 2020 Research and Innovation Programme under grant agreement no. 654360 NFFA‐Europe., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Colloidal Ni–Co–Sn nanoparticles as efficient electrocatalysts for the methanol oxidation reaction

  • Li, Junshan
  • Luo, ZhiShan
  • He, Feng
  • Zuo, Yong
  • Zhang, Chaoqi
  • Liu, Junfeng
  • Yu, Xiaoting
  • Du, Ruifeng
  • Zhang, Ting
  • Infante-Carrió, Maria F.
  • Tang, Peng-Yi
  • Arbiol, Jordi
  • Llorca, Jordi
  • Cabot, Andreu
The deployment of direct methanol fuel cells requires engineering cost-effective and durable electrocatalysts for the methanol oxidation reaction (MOR). As an alternative to noble metals, Ni-based alloys have shown excellent performance and good stability toward the MOR. Herein, we present a series of Ni3−xCoxSn2 colloidal nanoparticles (NPs) with composition tuned over the entire Ni/Co range (0 ≤ x ≤ 3). We demonstrate electrodes based on these ternary NPs to provide improved catalytic performance toward the MOR in an alkaline medium when compared with binary Ni3Sn2 NPs. A preliminary composition optimization resulted in Ni2.5Co0.5Sn2 NP-based electrodes exhibiting extraordinary mass current densities, up to 1050 mA mg−1, at 0.6 V vs. Hg/HgO in 1.0 M KOH containing 1.0 M methanol. This current density was about two-fold higher than that of Ni3Sn2 electrodes (563 mA mg−1). The excellent performance obtained with the substitution of small amounts of Ni by Co was concomitant with an increase of the surface coverage of active species and an enhancement of the diffusivity of the reaction limiting species. Additionally, saturation of the catalytic activity at higher methanol concentrations was measured for Ni3−xCoxSn2 NP-based electrodes containing a small amount of Co when compared with binary Ni3Sn2 NPs. While the electrode stability was improved with respect to elemental Ni NP-based electrodes, the introduction of small amounts of Co slightly decreased the cycling performance. Additionally, Sn, a key element to improve stability with respect to elemental Ni NPs, was observed to slowly dissolve in the presence of KOH. Density functional theory calculations on metal alloy surfaces showed the incorporation of Co within the Ni3Sn2 structure to provide more effective sites for CO and CH3OH adsorption. However, the relatively lower stability could not be related to CO or CH3OH poisoning., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R) and VALPEC (ENE2017-85087-C3). J. Li and T. Zhang thank the China Scholarship Council (CSC) for scholarship support. T. Zhang and J. Arbiol acknowledge funding from Generalitat de Catalunya 2017 SGR 327. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV-2013-0295). IREC and ICN2 are funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. J. Llorca is a Serra Húnter Fellow and is grateful to the ICREA Academia program and to MINECO/FEDER grant ENE2015-63969-R and GC 2017 SGR 128., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Colloidal synthesis of CsX nanocrystals (X = Cl, Br, I)

  • Shaw, Peter J.
  • Meyns, Michaela
  • Zuo, Yong
  • Grau-Carbonell, Albert
  • Lagoudakis, Pavlos G.
  • Charlton, Martin D. B.
  • Martí-Sànchez, Sara
  • Arbiol, Jordi
  • Cabot, Andreu
  • Kanaras, Antonio G.
A facile colloidal synthesis of highly ionic cesium halide nanocrystals is reported. Colloidal nanocrystals of CsI, CsCl and CsBr with unprecedentedly small dimensions are obtained using oleylammonium halides and cesium oleate as precursors. The ease and adaptability of our method enables its universalization for the formation of other highly ionic nanocrystals., P.J.S., A.G.K., P.G.L., and M.D.B.C. acknowledge funding by the EPSRC (EP/M508147/1). Y.Z. acknowledges the China Scholarship Council for scholarship support. A.C. and M.M. acknowledge a Juan de la Cierva formación grant by MINECO. S.M.-S. acknowledges funding from “Programa Internacional de Becas ‘la Caixa’-Severo Ochoa”. A.G.C., S.M.-S. and J.A. acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO ENE2017-85087-C3. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Colloidal Ni2−xCoxP nanocrystals for the hydrogen evolution reaction

  • Liu, Junfeng
  • Wang, Zhenxing
  • David, Jeremy
  • Llorca, Jordi
  • Li, Junshan
  • Yu, Xiaoting
  • Shavel, Alexey
  • Arbiol, Jordi
  • Meyns, Michaela
  • Cabot, Andreu
A cost-effective and scalable approach was developed to produce monodisperse Ni2−xCoxP nanocrystals (NCs) with composition tuned over the entire range (0 ≤ x ≤ 2). Ni2−xCoxP NCs were synthesized using low-cost, stable and low-toxicity triphenyl phosphite (TPP) as a phosphorus source, metal chlorides as metal precursors and hexadecylamine (HDA) as a ligand. The synthesis involved the nucleation of amorphous Ni–P and its posterior crystallization and simultaneous incorporation of Co. The composition, size and morphology of the Ni2−xCoxP NCs could be controlled simply by varying the ratio of Ni and Co precursors and the amounts of TPP and HDA. Ternary Ni2−xCoxP-based electrocatalysts exhibited enhanced electrocatalytic activity toward the hydrogen evolution reaction (HER) compared to binary phosphides. In particular, NiCoP electrocatalysts displayed the lowest overpotential of 97 mV at J = 10 mA cm−2 and an excellent long-term stability. DFT calculations of the Gibbs free energy for hydrogen adsorption at the surface of Ni2−xCoxP NCs showed NiCoP to have the most appropriate composition to optimize this parameter within the whole Ni2−xCoxP series. However, the hydrogen adsorption energy was demonstrated not to be the only parameter controlling the HER activity in Ni2−xCoxP., J. David and J. Arbiol acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project VALPEC (ENE2017-85087-C3). ICN2 acknowledges support from the Severo Ochoa Programme (SEV-2013-0295) and is funded by the CERCA Programme/Generalitat de Catalunya. J. David has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 665919. J. Llorca is a Serra Hunter Fellow and is grateful to the ICREA Academia program and grants MINECO/FEDER ENE2015-63969-R and GC 2017 SGR 128. J. Liu, J. Li and X. Yu thank the China Scholarship Council for scholarship support. M. Meyns acknowledges a Juan de la Cierva formación grant by the Spanish MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controllable vapor phase fabrication of F:Mn3O4 thin films functionalized with Ag and TiO2

  • Bigiani, Lorenzo
  • Barreca, Davide
  • Gasparotto, Alberto
  • Sada, Cinzia
  • Martí-Sànchez, Sara
  • Arbiol, Jordi
  • Maccato, Chiara
A facile two-step vapor phase synthetic approach is proposed for the fabrication of Mn3O4 thin films chemically modified with fluorine, and eventually functionalized with silver or titania. The adopted strategy exploits the initial chemical vapor deposition (CVD) of Mn3O4 on Si(100) substrates starting from a diamine diketonate Mn(II) complex, followed by the controlled radio frequency (RF)-sputtering of silver or titania. Complementary analytical techniques were employed to investigate the crystallinity (X-ray diffraction), chemical composition (X-ray photoelectron spectroscopy, secondary ion mass spectrometry, energy dispersive X-ray spectroscopy), morphology and nano-organization (field emission-scanning electron microscopy, atomic force microscopy, transmission electron microscopy) of both pristine and functionalized manganese oxide thin films. Under the adopted operating conditions, the target Mn(II) complex acted as a single-source precursor for both Mn and F, leading to the formation of phase-pure hausmannite Mn3O4 films characterized by a uniform in-depth fluorine content. In addition, the obtained results gave evidence of the formation of high purity Ag/F:Mn3O4 and TiO2/F:Mn3O4 composites with a close contact between the single constituents. This work outlines an amenable and efficient method for the vapor phase growth of composite Mn3O4-based thin films, which are favorable candidates for diverse technological applications, from photocatalysis to gas sensing., This work was financially supported by Padova University DOR 2016–2017 and P-DiSC #03BIRD2016-UNIPD projects. Funding from “Programa Internacional de Becas “la Caixa”-Severo Ochoa”, Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO ENE2017-85087-C3-3-R is also acknowledged. Catalan Institute of Nanoscience and Nanotechnology (ICN2) acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High thermoelectric performance in crystallographically textured n-type Bi2Te3–xSex produced from asymmetric colloidal nanocrystals

  • Liu, Yu
  • Lim, Khak Ho
  • Ibáñez, María
  • Ortega, Silvia
  • Li, Mengyao
  • David, Jeremy
  • Martí-Sànchez, Sara
  • Ng, Ka Ming
  • Arbiol, Jordi
  • Kovalenko, Maksym V.
  • Cadavid, Doris
  • Cabot, Andreu
In the present work, we demonstrate crystallographically textured n-type Bi2Te3–xSex nanomaterials with exceptional thermoelectric figures of merit produced by consolidating disk-shaped Bi2Te3–xSex colloidal nanocrystals (NCs). Crystallographic texture was achieved by hot pressing the asymmetric NCs in the presence of an excess of tellurium. During the hot press, tellurium acted both as lubricant to facilitate the rotation of NCs lying close to normal to the pressure axis and as solvent to dissolve the NCs approximately aligned with the pressing direction, which afterward recrystallize with a preferential orientation. NC-based Bi2Te3–xSex nanomaterials showed very high electrical conductivities associated with large charge carrier concentrations, n. We hypothesize that such large n resulted from the presence of an excess of tellurium during processing, which introduced a high density of donor TeBi antisites. Additionally, the presence in between grains of traces of elemental Te, a narrow band gap semiconductor with a work function well below Bi2Te3–xSex, might further contribute to increase n through spillover of electrons, while at the same time blocking phonon propagation and hole transport through the nanomaterial. NC-based Bi2Te3–xSex nanomaterials were characterized by very low thermal conductivities in the pressing direction, which resulted in ZT values up to 1.31 at 438 K in this direction. This corresponds to a ca. 40% ZT enhancement from commercial ingots. Additionally, high ZT values were extended over wider temperature ranges due to reduced bipolar contribution to the Seebeck coefficient and the thermal conductivity. Average ZT values up to 1.15 over a wide temperature range, 320 to 500 K, were measured, which corresponds to a ca. 50% increase over commercial materials in the same temperature range. Contrary to most previous works, highest ZT values were obtained in the pressing direction, corresponding to the c crystallographic axis, due to the predominance of the thermal conductivity reduction over the electrical conductivity difference when comparing the two crystal directions., This work was supported by the European Regional Development Funds. Y.L. and Y.Z. thank the China Scholarship Council for scholarship support. M.V.K. acknowledges partial financial support by the European Union (EU) via FP7 ERC Starting Grant 2012 (Project NANOSOLID, GA no. 306733). S.M.S. acknowledges funding from “Programa Internacional de Becas “la Caixa”-Severo Ochoa”. J.D. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement no. 665919. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and IREC from 2017 SGR 1246. ICN2 members acknowledge support from the Severo Ochoa Programme (MINECO, grant no. SEV-2013-0295) and is funded by the CERCA Programme/Generalitat de Catalunya. J.A., S.M.S., and J.D. acknowledge funding from MINECO subproject ANAPHASE (ENE2017-85087-C3)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

NiSn bimetallic nanoparticles as stable electrocatalysts for methanol oxidation reaction

  • Li, Junshan
  • Luo, ZhiShan
  • Zuo, Yong
  • Liu, Junfeng
  • Zhang, Ting
  • Tang, Peng-Yi
  • Arbiol, Jordi
  • Llorca, Jordi
  • Cabot, Andreu
Nickel is an excellent alternative catalyst to high cost Pt and Pt-group metals as anode material in direct methanol fuel cells. However, nickel presents a relatively low stability under operation conditions, even in alkaline media. In this work, a synthetic route to produce bimetallic NiSn nanoparticles (NPs) with tuned composition is presented. Through co-reduction of the two metals in the presence of appropriate surfactants, 3–5 nm NiSn NPs with tuned Ni/Sn ratios were produced. Such NPs were subsequently supported on carbon black and tested for methanol electro-oxidation in alkaline media. Among the different stoichiometries tested, the most Ni-rich alloy exhibited the highest electrocatalytic activity, with mass current density of 820 mA mg−1 at 0.70 V (vs. Hg/HgO). While this activity was comparable to that of pure nickel NPs, NiSn alloys showed highly improved stabilities over periods of 10,000 s at 0.70 V. We hypothesize this experimental fact to be associated to the collaborative oxidation of the byproducts of methanol which poison the Ni surface or to the prevention of the tight adsorption of these species on the Ni surface by modifying its surface chemistry or electronic density of states., J. Li and T. Zhang thank the China Scholarship Council for scholarship support. JA and TZ acknowledge funding from Generalitat de Catalunya 2014 SGR 1638 and the Spanish MINECO coordinated projects between IREC and ICN2 VALPEC and subprojects RESOL and ANAPHASE (ENE2017-85087-C3). ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV-2013-0295) and is funded by the CERCA Programme / Generalitat de Catalunya. JL is a Serra Húnter Fellow and is grateful to ICREA Academia program and to MINECO/FEDER grant ENE2015-63969-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimizing the yield of A-polar GaAs nanowires to achieve defect-free zinc blende structure and enhanced optical functionality

  • Zamani, Mahdi
  • Tütüncüoglu, Gözde
  • Martí-Sànchez, Sara
  • Francaviglia, Luca
  • Güniat, Lucas
  • Ghisalberti, Lea
  • Potts, Heidi
  • Friedl, Martin
  • Markov, Edoardo
  • Kim, Wonjong
  • Leran, Jean-Baptiste
  • Dubrovskii, Vladimir G.
  • Arbiol, Jordi
  • Fontcuberta i Morral, Anna
Compound semiconductors exhibit an intrinsic polarity, as a consequence of the ionicity of their bonds. Nanowires grow mostly along the (111) direction for energetic reasons. Arsenide and phosphide nanowires grow along (111)B, implying a group V termination of the (111) bilayers. Polarity engineering provides an additional pathway to modulate the structural and optical properties of semiconductor nanowires. In this work, we demonstrate for the first time the growth of Ga-assisted GaAs nanowires with (111)A-polarity, with a yield of up to ∼50%. This goal is achieved by employing highly Ga-rich conditions which enable proper engineering of the energies of A and B-polar surfaces. We also show that A-polarity growth suppresses the stacking disorder along the growth axis. This results in improved optical properties, including the formation of AlGaAs quantum dots with two orders or magnitude higher brightness. Overall, this work provides new grounds for the engineering of nanowire growth directions, crystal quality and optical functionality., The funding for this research was provided by Swiss National Science Foundation (SNSF), National Centre of Competence in Research Quantum Science and Technology (NCCR QSIT) and Horizon 2020 European Union Funding for Research and Innovation through projects INDEED and LIMQUET. SMS acknowledges funding from “Programa Internacional de Becas “la Caixa”-Severo Ochoa”. SMS and JA acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO ENE2017-85087-C3-3-R project. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2013-0295) and is funded by the CERCA Programme/Generalitat de Catalunya. This work has received funding from the European Union's Horizon 2020 Research and Innovation Programme under grant agreement No. 654360 NFFA-Europe. VGD thanks the Russian Foundation for Basic Research for financial support under grants 17-52-16017, 16-29-03129, 16-02-00134, 16-29-03283, and 18-02-40006., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical emission of GaN/AlN quantum-wires – the role of charge transfer from a nanowire template

  • Müßener, Jan
  • Greif, Ludwing A. Th.
  • Kalinowski, Stefan
  • Callsen, Gordon
  • Hille, Pascal
  • Schörmann, Jörg
  • Wagner, M. R.
  • Schliwa, Andrei
  • Martí-Sànchez, Sara
  • Arbiol, Jordi
  • Hoffmann, Axel
  • Eickhoff, Martin
We show that one-dimensional (1d) GaN quantum-wires (QWRs) exhibit intense and spectrally sharp emission lines. These QWRs are realized in an entirely self-assembled growth process by molecular beam epitaxy (MBE) on the side facets of GaN/AlN nanowire (NW) heterostructures. Time-integrated and time-resolved photoluminescence (PL) data in combination with numerical calculations allow the identification and assignment of the manifold emission features to three different spatial recombination centers within the NWs. The recombination processes in the QWRs are driven by efficient charge carrier transfer effects between the different optically active regions, providing high intense QWR luminescence despite their small volume. This is deduced by a fast rise time of the QWR PL, which is similar to the fast decay-time of adjacent carrier reservoirs. Such processes, feeding the ultra-narrow QWRs with carriers from the relatively large NWs, can be the key feature towards the realization of future QWR-based devices. While processing of single quantum structures with diameters in the nm range presents a serious obstacle with respect to their integration into electronic or photonic devices, the QWRs presented here can be analyzed and processed using existing techniques developed for single NWs., This work was supported by the Deutsche Forschungsgemeinschaft (Sfb 787). SMS acknowledges funding from “Programa Internacional de Becas “la Caixa”-Severo Ochoa”. SMS and JA acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish Ministerio de Economía y Competitividad project ValPEC (ENE2017-85087-C3). ICN2 acknowledges support from the Severo Ochoa Program (Ministerio de Economía y Competitividad, Grant SEV-2013-0295) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autónoma de Barcelona Materials Science PhD program. Some of the research leading to these results has received funding from the European Union Seventh Framework Program under Grant Agreement 312483 - ESTEEM2 (Integrated Infrastructure Initiative - I3). This work has received funding from the European Union's Horizon 2020 Research and Innovation Programme under grant agreement No. 654360 NFFA-Europe., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reduction of thermal conductivity in nanowires by combined engineering of crystal phase and isotope disorder

  • Mukherjee, Samik
  • Givan, U.
  • Senz, S.
  • Mata, Maria de la
  • Arbiol, Jordi
  • Moutanabbir, Oussama
Nanowires are a versatile platform to investigate and harness phonon and thermal transport phenomena in nanoscale systems. With this perspective, we demonstrate herein the use of crystal phase and mass disorder as effective degrees of freedom to manipulate the behavior of phonons and control the flow of local heat in silicon nanowires. The investigated nanowires consist of isotopically pure and isotopically mixed nanowires bearing either a pure diamond cubic or a cubic-rhombohedral polytypic crystal phase. The nanowires with tailor-made isotopic compositions were grown using isotopically enriched silane precursors 28SiH4, 29SiH4, and 30SiH4 with purities better than 99.9%. The analysis of polytypic nanowires revealed ordered and modulated inclusions of lamellar rhombohedral silicon phases toward the center in otherwise diamond-cubic lattice with negligible interphase biaxial strain. Raman nanothermometry was employed to investigate the rate at which the local temperature of single suspended nanowires evolves in response to locally generated heat. Our analysis shows that the lattice thermal conductivity in nanowires can be tuned over a broad range by combining the effects of isotope disorder and the nature and degree of polytypism on phonon scattering. We found that the thermal conductivity can be reduced by up to ∼40% relative to that of isotopically pure nanowires, with the lowest value being recorded for the rhombohedral phase in isotopically mixed 28Six30Si1–x nanowires with composition close to the highest mass disorder (x ∼ 0.5). These results shed new light on the fundamentals of nanoscale thermal transport and lay the groundwork to design innovative phononic devices., O.M. acknowledges support from NSERC-Canada (Discovery Grants and Strategic Partnership Grants), the Canada Foundation for Innovation, MRIF Québec (Coopération Québec-Catalogne), Mitacs, and Canada Research Chair. J.A. acknowledges funding from Generalitat de Catalunya 2014 SGR 1638 and the Spanish MINECO coordinated projects VALPEC and ANAPHASE (ENE2017-85087-C3-3-R). ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant No. SEV-2013-0295) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

SnP nanocrystals as anode materials for Na-ion batteries

  • Liu, Junfeng
  • Wang, Shutao
  • Kravchyk, Kostiantyn
  • Ibáñez, María
  • Krumeich, Frank
  • Widmer, Roland
  • Nasiou, Déspina
  • Meyns, Michaela
  • Llorca, Jordi
  • Arbiol, Jordi
  • Kovalenko, Maksym V.
  • Cabot, Andreu
Tin monophosphide is a layered material consisting of Sn–P–P–Sn sandwiches that are stacked on top of each other to form a three dimensional crystallographic structure. Its composition and crystal structure makes it an excellent candidate anode material for sodium-ion batteries (SIBs). However, SnP is yet to be explored for such and other applications due to its challenging synthesis. In the present work, we report the synthesis of SnP nanocrystals (NCs) from the reaction of hexamethylphosphorous triamide (HMPT) and a tin phosphonate prepared from tin oxalate and a long chain phosphonic acid. SnP NCs obtained from this reaction displayed a spherical geometry and a trigonal crystallographic phase with a superstructure attributed to ordered diphosphorus pairs. Such NCs were mixed with carbon black and used as anode materials in SIBs. SIBs based on SnP NCs and sodium(I) bis(fluorosulfonyl)imide (NaFSI) electrolyte displayed a high reversible capacity of 600 mA h g−1 at a current density of 100 mA g−1 and cycling stability for over 200 cycles. Their excellent cycling performance is associated with both the small size of the crystal domains and the particular composition and phase of SnP which prevent mechanical disintegration and major phase separation during sodiation and desodiation cycles. These results demonstrate SnP to be an attractive anode material for sodium ion batteries., DN and JA acknowledge funding from Generalitat de Catalunya 2014 SGR 1638 and the Spanish MINECO projects VALPEC and ANAPHASE (ENE2017-85087-C3-3-R). The ICN2 acknowledges support from the Severo Ochoa Programme (SEV-2013-0295) and is funded by Generalitat de Catalunya. JL thanks the China Scholarship Council for scholarship support. MM acknowledges a Juan de la Cierva formación grant by the Spanish MINECO. JLl is a Serra Húnter Fellow and is grateful to ICREA Academia program and projects MINECO/FEDER ENE2015-63969-R and GC 2017 SGR 128., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Supported Mn3O4 nanosystems for hydrogen production through ethanol photoreforming

  • Barreca, Davide
  • Bigiani, Lorenzo
  • Monai, Matteo
  • Carraro, Giorgio
  • Gasparotto, Alberto
  • Sada, Cinzia
  • Martí-Sànchez, Sara
  • Grau-Carbonell, Albert
  • Arbiol, Jordi
  • Maccato, Chiara
  • Fornasiero, Pablo
Photoreforming promoted by metal oxide nanophotocatalysts is an attractive route for clean and sustainable hydrogen generation. In the present work, we propose for the first time the use of supported Mn3O4 nanosystems, both pure and functionalized with Au nanoparticles (NPs), for hydrogen generation by photoreforming. The target oxide systems, prepared by chemical vapor deposition (CVD) and decorated with gold NPs by radio frequency (RF) sputtering, were subjected to a thorough chemico-physical characterization and utilized for a proof-of-concept H2 generation in aqueous ethanolic solutions under simulated solar illumination. Pure Mn3O4 nanosystems yielded a constant hydrogen production rate of 10 mmol h–1 m–2 even for irradiation times up to 20 h. The introduction of Au NPs yielded a significant enhancement in photocatalytic activity, which decreased as a function of irradiation time. The main phenomena causing the Au-containing photocatalyst deactivation have been investigated by morphological and compositional analysis, providing important insights for the design of Mn3O4-based photocatalysts with improved performances., This work was supported by funding from Padova University DOR 2016−2017 and P-DiSC #03BIRD2016-UNIPD projects, as well as from Trieste University (FRA2015 project). Funding from “Programa Internacional de Becas “la Caixa”-Severo Ochoa” and from Generalitat de Catalunya 2017 SGR 327 and MINECO ENE2017-85087-C3 is also acknowledged. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, grant SEV-2013-0295) and the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Template-assisted scalable nanowire networks

  • Friedl, Martin
  • Cerveny, Kris
  • Weigele, Pirmin
  • Tütüncüoglu, Gözde
  • Martí-Sànchez, Sara
  • Huang, Chunyi
  • Patlatiuk, Taras
  • Potts, Heidi
  • Sun, Zhiyuan
  • Hill, Megan O.
  • Güniat, Lucas
  • Kim, Wonjong
  • Zamani, Mahdi
  • Dubrovskii, Vladimir G.
  • Arbiol, Jordi
  • Lauhon, Lincoln J.
  • Zumbühl, Dominik M.
  • Fontcuberta i Morral, Anna
Topological qubits based on Majorana Fermions have the potential to revolutionize the emerging field of quantum computing by making information processing significantly more robust to decoherence. Nanowires are a promising medium for hosting these kinds of qubits, though branched nanowires are needed to perform qubit manipulations. Here we report a gold-free templated growth of III–V nanowires by molecular beam epitaxy using an approach that enables patternable and highly regular branched nanowire arrays on a far greater scale than what has been reported thus far. Our approach relies on the lattice-mismatched growth of InAs on top of defect-free GaAs nanomembranes yielding laterally oriented, low-defect InAs and InGaAs nanowires whose shapes are determined by surface and strain energy minimization. By controlling nanomembrane width and growth time, we demonstrate the formation of compositionally graded nanowires with cross-sections less than 50 nm. Scaling the nanowires below 20 nm leads to the formation of homogeneous InGaAs nanowires, which exhibit phase-coherent, quasi-1D quantum transport as shown by magnetoconductance measurements. These results are an important advance toward scalable topological quantum computing., Authors from EPFL and U. Basel acknowledge funding through the NCCR QSIT. Authors from EPFL further thank funding from SNF (project no. IZLRZ2-163861) and H2020 via the ITN project INDEED. Work at U. Basel was partially supported by the Swiss NSF, and the Swiss Nanoscience Institute SNI. S.M.S. acknowledges funding from “Programa Internacional de Becas “la Caixa″-Severo Ochoa”. J.A. and S.M.S. acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO coordinated project ValPEC (ENE2017-85087-C3). ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, grant no. SEV2013-0295) and is funded by the CERCA Programme/Generalitat de Catalunya. This work has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement no. 654360 NFFA-Europe. V.G.D. thanks the Ministry of Education and Science of the Russian Federation for financial support under grant no. 14-613-21-0055 (project ID RFMEFI61316 × 0055). L.J.L. acknowledges support of NSF DMR-1611341. M.O.H. acknowledges support of the NSF GRFP. NUCAPT received support from the MRSEC program (NSF DMR-1720139) at the Materials Research Center, the SHyNE Resource (NSF ECCS-1542205), and the Initiative for Sustainability and Energy (ISEN) at Northwestern University., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Triphenyl phosphite as the phosphorus source for the scalable and cost-effective production of transition metal phosphides

  • Liu, Junfeng
  • Meyns, Michaela
  • Zhang, Ting
  • Arbiol, Jordi
  • Cabot, Andreu
  • Shavel, Alexey
Transition metal phosphides have great potential to optimize a number of functionalities in several energy conversion and storage applications, particularly when nanostructured or in nanoparticle form. However, the synthesis of transition metal phosphide nanoparticles and its scalability is often limited by the toxicity, air sensitivity, and high cost of the reagents used. We present here a simple, scalable, and cost-effective “heating up” procedure to produce metal phosphides using inexpensive, low-toxicity, and air-stable triphenyl phosphite as source of phosphorus and chlorides as metal precursors. This procedure allows the synthesis of a variety of phosphide nanoparticles, including phosphides of Ni, Co, and Cu. The use of carbonyl metal precursors further allowed the synthesis of Fe2P and MoP nanoparticles. The fact that minor modifications in the experimental parameters allowed producing nanoparticles with different compositions and even to tune their size and shape shows the high potential and versatility of the triphenyl phosphite precursor and the presented method. We also detail here a methodology to displace organic ligands from the surface of phosphide nanoparticles, which is a key step toward their application in energy conversion and storage systems., This work was supported by the European Regional Development Funds and the Spanish Ministerio de Economia y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R). J.L. thanks the China Scholarship Council for scholarship support. M.M. thanks the Spanish MINECO for her Juan de la Cierva scholarship. T.Z. and J.A. acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO coordinated project ANAPHASE (ENE2017-85087-C3-3-R). ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV2013-0295) and is funded by the CERCA Programme/ Generalitat de Catalunya. T.Z. has received funding from the CSC-UAB PhD scholarship program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring copper foam with silver dendrite catalysts for highly selective carbon dioxide conversion into carbon monoxide

  • Urbain, Félix
  • Tang, Peng-Yi
  • Carretero, Nina M.
  • Andreu, Teresa
  • Arbiol, Jordi
  • Morante, Joan Ramón
The present study outlines the important steps to bring electrochemical conversion of carbon dioxide (CO2) closer to commercial viability by using a large-scale metallic foam electrode as a highly conductive catalyst scaffold. Because of its versatility, it was possible to specifically tailor three-dimensional copper foam through coating with silver dendrite catalysts by electrodeposition. The requirements of high-yield CO2 conversion to carbon monoxide (CO) were met by tuning the deposition parameters toward a homogeneous coverage of the copper foam with nanosized dendrites, which additionally featured crystallographic surface orientations favoring CO production. The presented results evidence that Ag dendrites, owing a high density of planes with stepped (220) surface sites, paired with the superior active surface area of the copper foam can significantly foster the CO productivity. In a continuous flow-cell reactor setup, CO Faradaic efficiencies reaching from 85 to 96% for a wide range of low applied cathode potentials (<1.0 VRHE) along with high CO current densities up to 27 mA/cm2 were achieved, far outperforming other tested scaffold materials. Overall, this research provides new strategic guidelines for the fabrication of efficient and versatile cathodes for CO2 conversion compatible with large-scale integrated prototype devices., Authors acknowledge funding from Generalitat de Catalunya through the CERCA program, 2017 SGR 1246, 2017 SGR 327 and the Spanish MINECO projects MAT2014-59961, ENE2016-80788-C5-5-R and ENE2017-85087, together with the support from REPSOL S.A. ICN2 acknowledges the support from the Severo Ochoa Programme (grant no. SEV2017-0706). F.U. acknowledges the financial support from MINECO through Juan de la Cierva fellowship (FJCI-2016-29147)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tin diselenide molecular precursor for solution‐processable thermoelectric materials

  • Zhang, Yu
  • Liu, Yu
  • Lim, Khak Ho
  • Xing, Congcong
  • Li, Mengyao
  • Zhang, Ting
  • Tang, Peng-Yi
  • Arbiol, Jordi
  • Llorca, Jordi
  • Ng, Ka Ming
  • Ibáñez, María
  • Guardia, Pablo
  • Prato, Mirko
  • Cadavid, Doris
  • Cabot, Andreu
In the present work, we detail a fast and simple solution‐based method to synthesize hexagonal SnSe2 nanoplates (NPLs) and their use to produce crystallographically textured SnSe2 nanomaterials. We also demonstrate that the same strategy can be used to produce orthorhombic SnSe nanostructures and nanomaterials. NPLs are grown through a screw dislocation‐driven mechanism. This mechanism typically results in pyramidal structures, but we demonstrate here that the growth from multiple dislocations results in flower‐like structures. Crystallographically textured SnSe2 bulk nanomaterials obtained from the hot pressing of these SnSe2 structures display highly anisotropic charge and heat transport properties and thermoelectric (TE) figures of merit limited by relatively low electrical conductivities. To improve this parameter, SnSe2 NPLs are blended here with metal nanoparticles. The electrical conductivities of the blends are significantly improved with respect to bare SnSe2 NPLs, what translates into a three‐fold increase of the TE Figure of merit, reaching unprecedented ZT values up to 0.65., This work was supported by the European Regional Development Funds. Y.L., T.Z. and Y.Z. thank the China Scholarship Council for scholarship support. T.Z., PY. T. and J.A. acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO coordinated project VALPEC (ENE2017‐85087‐C3). ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV‐2013‐0295) and is funded by the CERCA Programme/ Generalitat de Catalunya. J.L. is a Serra Húnter Fellow and is grateful to ICREA Academia program and GC 2017 SGR 128., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boosting photoelectrochemical water oxidation of hematite in acidic electrolytes by surface state modification

  • Tang, Peng-Yi
  • Han, Li-Juan
  • Simone Hegner, Franziska
  • Paciok, Paul
  • Biset-Peiró, Martí
  • Du, Hong-Chu
  • Wei, Xian-Kui
  • Jin, Lei
  • Xie, Haibing
  • Shi, Qin
  • Andreu, Teresa
  • Lira-Cantú, Mónica
  • Heggen, Marc
  • Dunin-Borkowski, Rafal E.
  • López, Núria
  • Galán-Mascarós, José Ramón
  • Morante, Joan Ramón
  • Arbiol, Jordi
State-of-the-art water-oxidation catalysts (WOCs) in acidic electrolytes usually contain expensive noble metals such as ruthenium and iridium. However, they too expensive to be implemented broadly in semiconductor photoanodes for photoelectrochemical (PEC) water splitting devices. Here, an Earth-abundant CoFe Prussian blue analogue (CoFe-PBA) is incorporated with core–shell Fe2O3/Fe2TiO5 type II heterojunction nanowires as composite photoanodes for PEC water splitting. Those deliver a high photocurrent of 1.25 mA cm−2 at 1.23 V versus reversible reference electrode in acidic electrolytes (pH = 1). The enhancement arises from the synergic behavior between the successive decoration of the hematite surface with nanolayers of Fe2TiO5 and then, CoFe-PBA. The underlying physical mechanism of performance enhancement through formation of the Fe2O3/Fe2TiO5/ CoFe-PBA heterostructure reveals that the surface states’ electronic levels of hematite are modified such that an interfacial charge transfer becomes kinetically favorable. These findings open new pathways for the future design of cheap and efficient hematite-based photoanodes in acidic electrolytes., This work was supported by the Spanish Ministerio de Economia y Competitividad (MINECO, Grants CTQ2015-71287-R, CTQ2015-71287-R, and CTQ2015-68770-R) and the coordinated Project ValPEC (ENE2017-85087-C3), the BIST Ignite Project inWOC2 and the Generalitat de Catalunya (2017 SGR 90, 2017 SGR 327, 2017 SGR 329, 2017 SGR 1246, and 2017 SGR 1406). ICN2 acknowledges the support from the Severo Ochoa Program (MINECO, Grant SEV-2017-0706). ICN2, ICIQ, and IREC are funded by the CERCA Programme/Generalitat de Catalunya. P.Y.T. acknowledges the scholarship support of DAAD short term grant. H.C.D. acknowledges support from the Deutsche Forschungsgemeinschaft (SFB 917). F.S.H. thanks the “LaCaixa”-Severo Ochoa International Programme (Programa internacional de Becas “LaCaixa”- Severo Ochoa) for a Ph.D. fellowship. P.P. and M.H. thank for the support by the Federal Ministry for Economic Affairs and Energy (BMWi) (Fundingregistration number: 03ET6080E). M.L. thanks the COST Action StableNextSol project MP1307, supported by COST (European Cooperation in Science and Technology). H.X. acknowledges the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295 for the postdoctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Compositionally tuned NixSn alloys as anode materials for lithium-ion and sodium-ion batteries with a high pseudocapacitive contribution

  • Li, Junshan
  • Xu, Xijun
  • Luo, ZhiShan
  • Zhang, Chaoqi
  • Yu, Xiaoting
  • Zuo, Yong
  • Zhang, Ting
  • Tang, Peng-Yi
  • Arbiol, Jordi
  • Llorca, Jordi
  • Liu, Jun
  • Cabot, Andreu
Nickel tin alloy nanoparticles (NPs) with tuned composition NixSn (0.6 ≤ x ≤ 1.9) were synthesized by a solution-based procedure and used as anode materials for Li-ion batteries (LIBs) and Na-ion batteries (SIBs). Among the compositions tested, Ni0.9Sn-based electrodes exhibited the best performance in both LIBs and SIBs. As LIB anodes, Ni0.9Sn-based electrodes delivered charge-discharge capacities of 980 mAh g−1 after 340 cycles at 0.2 A g−1 rate, which surpassed their maximum theoretical capacity considering that only Sn is lithiated. A kinetic characterization of the charge-discharge process demonstrated the electrode performance to be aided by a significant pseudocapacitive contribution that compensated for the loss of energy storage capacity associated to the solid-electrolyte interphase formation. This significant pseudocapacitive contribution, which not only translated into higher capacities but also longer durability, was associated to the small size of the crystal domains and the proper electrode composition. The performance of NixSn-based electrodes toward Na-ion storage was also characterized, reaching significant capacities above 200 mAh g−1 at 0.1 A g−1 but with a relatively fast fade over 120 continuous cycles. A relatively larger pseudocapacitive contribution was obtained in NixSn-based electrodes for SIBs when compared with LIBs, consistently with the lower contribution of the Na ion diffusion associated to its larger size., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R). J. Li thanks the China Scholarship Council for scholarship support. This project was supported by the National Natural Science Foundation of China (no. 51771076), the “1000 plan” from Chinese Government, and the Project of Public Interest Research and Capacity Building of Guangdong Province (no. 2017A010104004). T. Zhang, P. Tang and J. Arbiol acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO coordinated projects between IREC and ICN2 VALPEC and subprojects RESOL and ANAPHASE (ENE2017-85087-C3). ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV-2013-0295) and is funded by the CERCA Programme / Generalitat de Catalunya. T. Zhang has received funding from the CSC-UAB PhD scholarship program. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. J. Llorca is a Serra Húnter Fellow and is grateful to ICREA Academia program and to MINECO/FEDER grant ENE2015-63969-R and GC 2017 SGR 128., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Co–Sn nanocrystalline solid solutions as anode materials in lithium-ion batteries with high pseudocapacitive contribution

  • Li, Junshan
  • Xu, Xijun
  • Luo, ZhiShan
  • Zhang, Chaoqi
  • Zuo, Yong
  • Zhang, Ting
  • Tang, Peng-Yi
  • Infante-Carrió, Maria F.
  • Arbiol, Jordi
  • Llorca, Jordi
  • Liu, Jun
  • Cabot, Andreu
Co–Sn solid‐solution nanoparticles with Sn crystal structure and tuned metal ratios were synthesized by a facile one pot solution‐based procedure involving the initial reduction of a Sn precursor followed by incorporation of Co within the Sn lattice. These nanoparticles were used as anode materials for Li‐ion batteries. Among the different compositions tested, Co0.7Sn and Co0.9Sn electrodes provided the highest capacities with values above 1500 mAh g−1 at a current density of 0.2 A g−1 after 220 cycles, and up to 800 mAh g−1 at 1.0 A g−1 after 400 cycles. Up to 81 % pseudocapacitance contribution was measured for these electrodes at a sweep rate of 1.0 mV s−1, thereby indicating fast kinetics and long durability. The excellent performance of Co–Sn nanoparticle alloy‐based electrodes was attributed to both the small size of the crystal domains and their suitable composition, which buffered volume changes of Sn and contributed to a suitable electrode restructuration., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016‐77798‐C4‐3‐R). J. Li thanks the China Scholarship Council for scholarship support. This project was supported by the National Natural Science Foundation of China (no. 51771076), the “1000 plan” from Chinese Government, and the Project of Public Interest Research and Capacity Building of Guangdong Province (no. 2017A010104004). TZ, PYT, MFIC and JA acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO coordinated projects between IREC and ICN2 VALPEC and subprojects RESOL and ANAPHASE (ENE2017‐85087‐C3). ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV‐2013‐0295) and is funded by the CERCA Programme/ Generalitat de Catalunya. JL is a Serra Húnter Fellow and is grateful to ICREA Academia program and to MINECO/FEDER grant ENE2015‐63969‐R. TZ has received funding from the CSC‐UAB PhD scholarship program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chromium phosphide CrP as highly active and stable electrocatalysts for oxygen electroreduction in alkaline media

  • Liu, Junfeng
  • Yu, Xiaoting
  • Du, Ruifeng
  • Zhang, Chaoqi
  • Zhang, Ting
  • Llorca, Jordi
  • Arbiol, Jordi
  • Wang, Ying
  • Meyns, Michaela
  • Cabot, Andreu
Catalysts for oxygen reduction reaction (ORR) are key components in emerging energy technologies such as fuel cells and metal-air batteries. Developing low-cost, high performance and stable electrocatalysts is critical for the extensive implementation of these technologies. Herein, we present a procedure to prepare colloidal chromium phosphide CrP nanocrystals and we test their performance as ORR electrocatalyst. CrP-based catalysts exhibited remarkable activities with a limiting current density of 4.94 mA cm−2 at 0.2 V, a half-potential of 0.65 V and an onset potential of 0.8 V at 1600 rpm, which are comparable to commercial Pt/C. Advantageously, CrP-based catalysts displayed much higher stabilities and higher tolerances to methanol in alkaline solution. Using density functional theory calculations, we demonstrate CrP to provide a very strong chemisorption of O2 that facilitates its reduction and explains the excellent ORR performance experimentally demonstrated., This work was supported by the European Regional Development Funds and the Spanish MINECO project SEHTOP (ENE2016-77798-C4- 3-R). T. Zhang and J. Arbiol acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (SEV-2017-0706) and is funded by the CERCA Programme / Generalitat de Catalunya. J. Llorca is a Serra Hunter Fellow and is grateful to ICREA Academia program and grants MINECO/FEDER ENE2015-63969-R and GC 2017 SGR 128. J. Liu, X. Yu, R. Du, C. Zhang and T. Zhang thank the China Scholarship Council for scholarship support. M. Meyns acknowledges a Juan de la Cierva formación grant by theSpanish MINECO. Y. Wang thanks the National Natural Science Foundation of China for financial support (Grant Nos: 21673220, 21831003, 21733004), National Key Research and Development Program of China (2016YFA0602900) and High performance Computing Center of Jilin Province and Computing Center of Jilin University for essential support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combined high catalytic activity and efficient polar tubular nanostructure in urchin‐like metallic NiCo2Se4 for high‐performance lithium–sulfur batteries

  • Zhang, Chaoqi
  • Jacas Biendicho, Jordi
  • Zhang, Ting
  • Du, Ruifeng
  • Li, Junshan
  • Yang, Xuhui
  • Arbiol, Jordi
  • Zhou, Yingtang
  • Morante, Joan Ramón
  • Cabot, Andreu
Urchin‐shaped NiCo2Se4 (u‐NCSe) nanostructures as efficient sulfur hosts are synthesized to overcome the limitations of lithium–sulfur batteries (LSBs). u‐NCSe provides a beneficial hollow structure to relieve volumetric expansion, a superior electrical conductivity to improve electron transfer, a high polarity to promote absorption of lithium polysulfides (LiPS), and outstanding electrocatalytic activity to accelerate LiPS conversion kinetics. Owing to these excellent qualities as cathode for LSBs, S@u‐NCSe delivers outstanding initial capacities up to 1403 mAh g−1 at 0.1 C and retains 626 mAh g−1 at 5 C with exceptional rate performance. More significantly, a very low capacity decay rate of only 0.016% per cycle is obtained after 2000 cycles at 3 C. Even at high sulfur loading (3.2 mg cm−2), a reversible capacity of 557 mAh g−1 is delivered after 600 cycles at 1 C. Density functional theory calculations further confirm the strong interaction between NCSe and LiPS, and cytotoxicity measurements prove the biocompatibility of NCSe. This work not only demonstrates that transition metal selenides can be promising candidates as sulfur host materials, but also provides a strategy for the rational design and the development of LSBs with long‐life and high‐rate electrochemical performance., This work corresponds to an extension of activities initially performed around the objectives defined by the Helis project which received funding from the European Union's Horizon 2020 program under the Grant Agreement No. 666221. The authors acknowledge funding from Generalitat de Catalunya2017 SGR 1246 and 2017 SGR 327, the Spanish MINECO projects ENE2016‐77798‐C4‐3‐R and ENE2017‐85087‐C3, and the Zhou Shan Science and Technology Project (2018C21010). C. Zhang and T. Zhang thank the China Scholarship Council (CSC) for scholarship support. IREC acknowledges funding from European Regional Development Funds (ERDF‐FEDER Programa Competitivitat de Catalunya 2007–2013). ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV‐2017‐0706) and was funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Degradation and regeneration mechanisms of NiO protective layers deposited by ALD on photoanodes

  • Ros, Carles
  • Andreu, Teresa
  • David, Jeremy
  • Arbiol, Jordi
  • Morante, Joan Ramón
The use of high pH electrolytes requires protective layers to avoid corrosion in photoanodes based on semiconductors like silicon. NiO is one of the materials that comply with the requirements for transparency, conductivity, chemical stability and catalysis on the surface in contact with the electrolyte. Here, NiO layers have been deposited by atomic layer deposition (ALD) at low temperatures, and their stability is analyzed over 1000 hours. Due to the layer structure characteristics, the best overall performance was achieved at 100 °C deposition temperature. By electrochemical measurements progressive time dependent degradation under anodic working conditions is observed, attributed to the formation of higher nickel oxidation states at the electrode/electrolyte interface as a main degradation mechanism, resulting in an OER overpotential increase. Another minor degradation mechanism affects the optical surface quality and gives rise to a loss of photon absorption efficiency on the scale of hundreds of hours. A regeneration process based on in situ periodic cyclic voltammetry, bringing the electrodes to cathodic conditions every 3, 12 or 48 hours, has been shown to partially reverse the main degradation mechanism achieving 85% stability over 1000 hours in a study with over 10 mA cm−2 photocurrent densities., Authors from the IREC acknowledge Generalitat de Catalunya for financial support through the CERCA Programme, M2E (2014SGR1638). The IREC also acknowledges additional support through the European Regional Development Funds (ERDF, FEDER) and MINECO coordinated projects MAT2014-59961-C2, ENE2016-80788-C5-5-R and ENE2017-85087-C3. C. R. acknowledges the MINECO for his FPI grant (BES-2015-071618). The ICN2 was supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706) and was funded by the CERCA Programme/Generalitat de Catalunya. The ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. J. D. received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 665919 (P-SPHERE) co-funded by the Severo Ochoa Programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering surface states of hematite based photoanodes for boosting photoelectrochemical water splitting

  • Tang, Peng-Yi
  • Arbiol, Jordi
Hematite-based photoanodes are promising candidates for photoelectrochemical water splitting. However, the performance of pristine hematite semiconductors is unsatisfactory due to charge recombination occurring at different interfaces: back contact, bulk and semiconductor/electrolyte interfaces. Increasing efforts have been focused on enhancing the performance of hematite based photoanodes via nanostructure control, doping, heterojunction construction, and surface modification with a secondary semiconductor or an oxygen evolution electrocatalyst. Most of the previous studies attributed the enhanced PEC water splitting performance to the changes in the donor density via doping, the formation of type II heterojunction via a secondary semiconductor coating and the improved water oxidation kinetics via coating oxygen evolution electrocatalysts. However, the role of surface states presented at the semiconductor/electrolyte interfaces of hematite-based photoanodes has been overlooked in previous investigations, which virtually play a critical role in determining the photoelectrochemical water oxidation process. In this review, we summarize the recent progress of various techniques employed for the detection of surface states of hematite photoanodes and highlight the important role of modifying surface states in the development of high performance hematite based photoanodes for photoelectrochemical water splitting application. The challenges and future prospects in the study of hematite based photoanodes are also discussed., The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327, the Spanish MINECO project ENE2017-85087-C3 and the BIST Ignite project InWOC2. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work was conducted in the framework of the Universitat Autonoma de Barcelona Materials Science PhD program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From rational design of a new bimetallic MOF family with tunable linkers to OER catalysts

  • Zhang, Xuan
  • Luo, Jiangshui
  • Wan, Kai
  • Plessers, Dieter
  • Sels, Bert
  • Song, Jianxun
  • Chen, Liugang
  • Zhang, Ting
  • Zhang, Ting
  • Tang, Peng-Yi
  • Morante, Joan Ramón
  • Arbiol, Jordi
  • Fransaer, Jan
Innovative bimetallic MOFs offer more possibilities to further tailor the properties of MOFs, which have attracted great attention for wide applications. However, it is still a great challenge to rationally design bimetallic MOFs due to the lack of a tunable and reasonable hybrid structure architecture. Herein, a new series of bimetallic metal–organic frameworks (MOFs) with tunable pillar linkers were prepared by a one-step synthesis method. These bimetallic MOFs retain the same crystal structure when the mole fraction (based on metal) of the two metals changes from 0 to 1 and both metal ions occupy random nodal positions. The incorporation of a second metal cation has a large influence on the intrinsic properties (e.g. thermal stabilities and band gaps) of the MOFs. Furthermore, these bimetallic MOFs were used as self-sacrificial templates to prepare bimetal oxide catalysts for the oxygen evolution reaction (OER). After pyrolysis, a porous and hierarchical honeycomb-like structure with carbon network covered (bi)metal oxides is formed. Among all the bimetallic MOF-derived catalysts, CoNi1@C showed the best performance for the OER with the lowest Tafel slopes (55.6 mV dec−1) and overpotentials (335 mV on a glassy carbon electrode and 276 mV on Ni foam) at a current density of 10 mA cm−2, which is higher than those of state-of-the-art Co–Ni mixed oxide catalysts derived from MOFs for the OER. Our results indicate that the incorporation of a second metal ion is a promising strategy to tailor the properties of MOFs. More importantly, this new bimetallic MOF family with tunable linkers is expected to serve as a flexible assembly platform to offer broad possibilities for practical applications of MOFs., X. Zhang is grateful to the China Scholarship Council. J. Luo acknowledges the Research Foundation – Flanders (FWO) for a Research Project (G0B3218N), a Research Grant (1529816N) and a travel grant (V410316N) for a Visiting Professorship at the Technical University of Denmark. TZ, PYT and JA acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project VALPEC (ENE2017-85087-C3). ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. TZ has received funding from the CSC-UAB PhD scholarship program. D. P. acknowledges the Research Foundation – Flanders (FWO) for a Ph.D. (aspirant) Fellowship. We thank Iris Cuppens and Dr Fei Wang (Department of Materials Engineering, KU Leuven) for the assistance with EPMA and ICP measurements. Funding from the National Natural Science Foundation of China (No. 21776120), “Minjiang Scholar” Program and key project (No. JZ160480) of Department of Education, Fujian Province, China, and Open Project (No. 201607) of State Key Laboratory of Physical Chemistry of Solid Surfaces, Xiamen University is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene-supported palladium phosphide PdP2 nanocrystals for ethanol electrooxidation

  • Liu, Junfeng
  • Luo, ZhiShan
  • Li, Junshan
  • Yu, Xiaoting
  • Llorca, Jordi
  • Nasiou, Déspina
  • Arbiol, Jordi
  • Meyns, Michaela
  • Cabot, Andreu
We present a procedure to produce single-phase PdP2 nanocrystals (NCs). The approach involves the reaction of palladium(II) acetylacetonate and hexamethylphosphoroustriamide to nucleate defective Pd5P2 nanoparticles that subsequently, with further phosphorous incorporation, crystallize into PdP2. The synthesized PdP2 NCs were supported on reduced graphene oxide (rGO) and applied as electrocatalysts for ethanol oxidation. The activity of PdP2 toward the ethanol oxidation reaction (EOR) was over a threefold higher than that of Pd NCs prepared under similar conditions. Even better performance was obtained from PdP2 NCs supported on rGO, which showed current densities up to 51.4 mA cm−2 and mass activities of 1.60 A mg-1Pd, that is 4.8 and 15 times higher than Pd NCs. Besides, PdP2 NCs and PdP2/rGO catalysts showed improved stability during EOR than Pd NCs and Pd/rGO., This work was supported by the European Regional Development Funds and the Spanish MINECO project SEHTOP (ENE2016-77798-C4-3-R). D. Nasiou and J. Arbiol acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ANAPHASE (ENE2017-85087-C3). ICN2 acknowledges support from the Severo Ochoa Programme (SEV-2013-0295) and is funded by the CERCA Programme / Generalitat de Catalunya. J. Llorca is a Serra Hunter Fellow and is grateful to ICREA Academia program and grants MINECO/FEDER ENE2015-63969-R and GC 2017 SGR 128. J. Liu, J. Li and X. Yu thank the China Scholarship Council for scholarship support. M. Meyns acknowledges a Juan de la Cierva formación grant by the Spanish MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hierarchical porous Ni3S4 with enriched high‐valence Ni sites as a robust electrocatalyst for efficient oxygen evolution reaction

  • Wan, Kai
  • Luo, Jiangshui
  • Zhou, Chen
  • Zhang, Ting
  • Arbiol, Jordi
  • Lu, Xihong
  • Mao, Bing-Wei
  • Zhang, Xuan
  • Fransaer, Jan
Electrochemical water splitting is a common way to produce hydrogen gas, but the sluggish kinetics of the oxygen evolution reaction (OER) significantly limits the overall energy conversion efficiency of water splitting. In this work, a highly active and stable, meso–macro hierarchical porous Ni3S4 architecture, enriched in Ni3+ is designed as an advanced electrocatalyst for OER. The obtained Ni3S4 architectures exhibit a relatively low overpotential of 257 mV at 10 mA cm−2 and 300 mV at 50 mA cm−2. Additionally, this Ni3S4 catalyst has excellent long‐term stability (no degradation after 300 h at 50 mA cm−2). The outstanding OER performance is due to the high concentration of Ni3+ and the meso–macro hierarchical porous structure. The presence of Ni3+ enhances the chemisorption of OH−, which facilitates electron transfer to the surface during OER. The hierarchical porosity increases the number of exposed active sites, and facilitates mass transport. A water‐splitting electrolyzer using the prepared Ni3S4 as the anode catalyst and Pt/C as the cathode catalyst achieves a low cell voltage of 1.51 V at 10 mA cm−2. Therefore, this work provides a new strategy for the rational design of highly active OER electrocatalysts with high valence Ni3+ and hierarchical porous architectures., K.W. is grateful to the Oversea Study Program of Guangzhou Elite Project. The Open Project Program of Provincial Key Laboratory of Clean Energy Materials, Longyan University (QJNY‐201705) is also acknowledged. X.Z. is grateful to the China Scholarship Council. J.L. acknowledges the Research Foundation – Flanders (FWO) for a Research Project (G0B3218N) and a Research Grant (1529816N). Funding from the National Natural Science Foundation of China (No. 21776120), and “Minjiang Scholar” Program and key project (No. JZ160480) of Department of Education, Fujian Province, China is also acknowledged. ICN2 members acknowledge funding from Generalitat de Catalunya2017 SGR 327 and the Spanish MINECO project VALPEC (ENE2017‐85087‐C3). ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant No. SEV‐2013‐0295) and was funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work was performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. T.Z. received funding from the CSC‐UAB Ph.D. scholarship program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insight into the degradation mechanisms of atomic layer deposited TiO2 as photoanode protective layer

  • Ros, Carles
  • Carretero, Nina M.
  • David, Jeremy
  • Arbiol, Jordi
  • Andreu, Teresa
  • Morante, Joan Ramón
Around 100 nm thick TiO2 layers deposited by atomic layer deposition (ALD) have been investigated as anticorrosion protective films for silicon-based photoanodes decorated with 5 nm NiFe catalyst in highly alkaline electrolyte. Completely amorphous layers presented high resistivity; meanwhile, the ones synthesized at 300 °C, having a fully anatase crystalline TiO2 structure, introduced insignificant resistance, showing direct correlation between crystallization degree and electrical conductivity. The conductivity through crystalline TiO2 layers has been found not to be homogeneous, presenting preferential conduction paths attributed to grain boundaries and defects within the crystalline structure. A correlation between the conductivity atomic force microscopy measurements and grain interstitials can be seen, supported by high-resolution transmission electron microscopy cross-sectional images presenting defective regions in crystalline TiO2 grains. It was found that the conduction mechanism goes through the injection of electrons coming from water oxidation from the electrocatalyst into the TiO2 conduction band. Then, electrons are transported to the Si/SiOx/TiO2 interface where electrons recombine with holes given by the p+n-Si junction. No evidences of intra-band-gap states in TiO2 responsible of conductivity have been detected. Stability measurements of fully crystalline samples over 480 h in anodic polarization show a continuous current decay. Electrochemical impedance spectroscopy allows to identify that the main cause of deactivation is associated with the loss of TiO2 electrical conductivity, corresponding to a self-passivation mechanism. This is proposed to reflect the effect of OH– ions diffusing in the TiO2 structure in anodic conditions by the electric field. This fact proves that a modification takes place in the defective zone of the layer, blocking the ability to transfer electrical charge through the layer. According to this mechanism, a regeneration of the degradation process is demonstrated possible based on ultraviolet illumination, which contributes to change the occupancy of TiO2 electronic states and to recover the defective zone’s conductivity. These findings confirm the connection between the structural properties of the ALD-deposited polycrystalline layer and the degradation mechanisms and thus highlight main concerns toward fabricating long-lasting metal-oxide protective layers for frontal illuminated photoelectrodes., This work was partially supported by Repsol S.A. and Enagas S.A. Authors from IREC acknowledge Generalitat de Catalunya for financial support through the CERCA Programme, M2E (2017SGR1246), and XaRMAE network. IREC also acknowledges additional support by the European Regional Development Funds (ERDF, FEDER) and by MINECO coordinated projects MAT2014-59961-C2, ENE2017-85087-C3 (IREC/ICN2) and ENE2016-80788-C5-5-R. C.R. acknowledges MINECO for his FPI grant (BES-2015-071618). ICN2 acknowledge funding from Generalitat de Catalunya 2017 SGR 327. ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and was funded by the CERCA Programme/Generalitat de Catalunya. J.D. received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 665919 (P-SPHERE) co-funded by Severo Ochoa Programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In situ electrochemical oxidation of Cu2S into CuO nanowires as a durable and efficient electrocatalyst for oxygen evolution reaction

  • Zuo, Yong
  • Liu, Yongpeng
  • Li, Junshan
  • Du, Ruifeng
  • Zhang, Ting
  • Arbiol, Jordi
  • Divins, Núria J.
  • Llorca, Jordi
  • Guijarro, Néstor
  • Sivula, Kevin
  • Cabot, Andreu
Development of cost-effective oxygen evolution catalysts is of capital importance for the deployment of large-scale energy-storage systems based on metal–air batteries and reversible fuel cells. In this direction, a wide range of materials have been explored, especially under more favorable alkaline conditions, and several metal chalcogenides have particularly demonstrated excellent performances. However, chalcogenides are thermodynamically less stable than the corresponding oxides and hydroxides under oxidizing potentials in alkaline media. Although this instability in some cases has prevented the application of chalcogenides as oxygen evolution catalysts and it has been disregarded in some others, we propose to use it in our favor to produce high-performance oxygen evolution catalysts. We characterize here the in situ chemical, structural, and morphological transformation during the oxygen evolution reaction (OER) in alkaline media of Cu2S into CuO nanowires, mediating the intermediate formation of Cu(OH)2. We also test their OER activity and stability under OER operation in alkaline media and compare them with the OER performance of Cu(OH)2 and CuO nanostructures directly grown on the surface of a copper mesh. We demonstrate here that CuO produced from in situ electrochemical oxidation of Cu2S displays an extraordinary electrocatalytic performance toward OER, well above that of CuO and Cu(OH)2 synthesized without this transformation., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R). Y.Z., Junshan Li, R.D., X.H., and T.Z. thank the China Scholarship Council for the scholarship support. Y.L. and N.G. thank the Swiss National Science Foundation (SNF) for funding under the Ambizione Energy grant no. PZENP2_166871. Jordi Llorca is a Serra Hunter Fellow and is grateful to ICREA Academia program and to GC 2017 SGR 128. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ligand-mediated band engineering in bottom-up assembled SnTe nanocomposites for thermoelectric energy conversion

  • Ibáñez, María
  • Hasler, Roger
  • Genç, Aziz
  • Liu, Yu
  • Kuster, Beatrice
  • Scguster, Maximilian
  • Dobrozhan, Oleksandr
  • Cadavid, Doris
  • Arbiol, Jordi
  • Cabot, Andreu
  • Kovalenko, Maksym V.
The bottom-up assembly of colloidal nanocrystals is a versatile methodology to produce composite nanomaterials with precisely tuned electronic properties. Beyond the synthetic control over crystal domain size, shape, crystal phase, and composition, solution-processed nanocrystals allow exquisite surface engineering. This provides additional means to modulate the nanomaterial characteristics and particularly its electronic transport properties. For instance, inorganic surface ligands can be used to tune the type and concentration of majority carriers or to modify the electronic band structure. Herein, we report the thermoelectric properties of SnTe nanocomposites obtained from the consolidation of surface-engineered SnTe nanocrystals into macroscopic pellets. A CdSe-based ligand is selected to (i) converge the light and heavy bands through partial Cd alloying and (ii) generate CdSe nanoinclusions as a secondary phase within the SnTe matrix, thereby reducing the thermal conductivity. These SnTe-CdSe nanocomposites possess thermoelectric figures of merit of up to 1.3 at 850 K, which is, to the best of our knowledge, the highest thermoelectric figure of merit reported for solution-processed SnTe., This work was financially supported by the European Union (EU) via FP7 ERC Starting Grant 2012 (Project NANOSOLID, GA No. 306733). M.I. was supported by IST Austria, and by ETH Zurich via ETH career seed grant (SEED-18 16-2). Y.L. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 754411. IREC acknowledges funding from Generalitat de Catalunya (2014SGR1638). J.A. acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO coordinated projects between IREC and ICN2 ENE2017-85087-C3. ICN2 acknowledges support from the Severo Ochoa Program (MINECO, Grant SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MoSx@NiO composite nanostructures: An advanced nonprecious catalyst for hydrogen evolution reaction in alkaline media

  • Ibupoto, Zafar Hussain
  • Tahira, Aneela
  • Tang, Peng-Yi
  • Liu, Xianjie
  • Morante, Joan Ramón
  • Fahlman, Mats
  • Arbiol, Jordi
  • Vagin, Mikhail
  • Vomiero, Alberto
The design of the earth‐abundant, nonprecious, efficient, and stable electrocatalysts for efficient hydrogen evolution reaction (HER) in alkaline media is a hot research topic in the field of renewable energies. A heterostructured system composed of MoSx deposited on NiO nanostructures (MoSx@NiO) as a robust catalyst for water splitting is proposed here. NiO nanosponges are applied as cocatalyst for MoS2 in alkaline media. Both NiO and MoS2@NiO composites are prepared by a hydrothermal method. The NiO nanostructures exhibit sponge‐like morphology and are completely covered by the sheet‐like MoS2. The NiO and MoS2 exhibit cubic and hexagonal phases, respectively. In the MoSx@NiO composite, the HER experiment in 1 m KOH electrolyte results in a low overpotential (406 mV) to produce 10 mA cm−2 current density. The Tafel slope for that case is 43 mV per decade, which is the lowest ever achieved for MoS2‐based electrocatalyst in alkaline media. The catalyst is highly stable for at least 13 h, with no decrease in the current density. This simple, cost‐effective, and environmentally friendly methodology can pave the way for exploitation of MoSx@NiO composite catalysts not only for water splitting, but also for other applications such as lithium ion batteries, and fuel cells., A.V. and Z.H.I. acknowledge Knut and Alice Wallenberg Foundation, the Kempe Foundation, and the LTU Lab fund program for partial funding. J.A. and P.Y.T. acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and JRM 2017 SGR 1246. J.A., P.Y.T., and J.R.M. acknowledge the Spanish MINECO project ENE2017‐85087‐C3. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV‐2013‐0295‐17‐1). ICN2 and IREC are funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work was performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multilayered hematite nanowires with thin‐film silicon photovoltaics in an all‐earth‐abundant hybrid tandem device for solar water splitting

  • Urbain, Félix
  • Tang, Peng-Yi
  • Smirnov, Vladimir
  • Welter, Katharina
  • Andreu, Teresa
  • Finger, Friedhelm
  • Arbiol, Jordi
  • Morante, Joan Ramón
The concept of hybrid tandem device structures that combine metal oxides with thin‐film semiconducting photoabsorbers holds great promise for large‐scale, robust, and cost‐effective bias‐free photoelectrochemical water splitting (PEC‐WS). This work highlights important steps toward the efficient coupling of high‐performance hematite photoanodes with multijunction thin‐film silicon photocathodes providing high bias‐free photocurrent density. The hybrid PEC‐WS device is optimized by testing three types of multijunction silicon photocathodes with the hematite photoanode: amorphous silicon (a‐Si:H) tandem: a‐Si:H/a‐Si:H and triple junction with microcrystalline silicon (μc‐Si:H): a‐Si:H/a‐Si:H/μc‐Si:H and a‐Si:H/μc‐Si:H/μc‐Si:H. The results provide evidence that the multijunction structures offer high flexibility for hybrid tandem devices with regard to tunable photovoltages and spectral matching. Furthermore, both photoanode and photocathode are tested under various electrolyte and light concentration conditions, respectively, with respect to their photoelectrochemical performance and stability. A 27 % enhancement in the solar‐to‐hydrogen conversion efficiency is observed upon concentrating light from 100 to 300 mW cm−2. Ultimately, bias‐free water splitting is demonstrated, with a photocurrent density of 4.6 mA cm−2 (under concentrated illumination) paired with excellent operation stability for more than 24 h of the all‐earth‐abundant and low‐cost hematite/silicon tandem PEC‐WS device., The authors acknowledge funding from Generalitat de Catalunya through the CERCA program, 2017 SGR 1246, 2017 SGR 327 and the Spanish MINECO projects MAT2014‐59961, ENE2016‐80788‐C5‐5‐R and ENE2017‐85087, together with the support from REPSOL, S. A. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV‐2017‐0706). IREC also acknowledges additional support from the European Regional Development Funds (ERDF, FEDER), (S)TEM part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program and the rest in the Nanoscience program of the University of Barcelona. The authors thank S. Moll (IEK‐5), M. Biset‐Peiró (IREC), and H. Xie (IREC) for their contribution to this work. F.U. acknowledges financial support from MINECO through Juan de la Cierva fellowship (FJCI‐2016–29147).V.S., K.W., and F.F. (authors from IEK‐5) thank the Deutsche Forschungsgemeinschaft (DFG) (Priority Program SPP 1613)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the role of ceria in Ni-Al2O3 catalyst for CO2 plasma methanation

  • Biset-Peiró, Martí
  • Guilera, Jordi
  • Zhang, Ting
  • Arbiol, Jordi
  • Andreu, Teresa
The effect of Ce loading content on Ni-CeO2/Al2O3 catalysts for CO2 plasma methanation was evaluated. Catalysts were prepared by one-pot evaporation-induced self-assembly, Ni content was fixed at 15 wt. %, while CeO2 ranged 0–50 wt. %. The catalysts performances were tested under atmospheric pressure in two operation modes, thermal- and plasma-catalysis. As for conventional thermal catalysis, the catalyst was thermally activated between 200 and 400 °C; while in plasma-catalysis, the catalyst was activated by plasma generated by a dielectric barrier discharges (DBD) reactor. By the application of plasma in the catalyst bed, the reaction temperature was reduced from 350 °C to 150 °C to obtain the same level of conversion than thermal-catalysis. In addition, the incorporation of Ce in Ni-CeO2/Al2O3 led to an improvement of the catalytic performance in both thermal- and plasma-catalysis. Nevertheless, divergences on the optimum Ce content were found. On plasma experiments, the catalyst was more active at a lower amount of CeO2 (˜10 wt.%) with respect to thermal catalysis (˜40 wt.%), reducing the catalyst fabrication cost. Those differences highlights that the CO generated by plasma CO2 dissociation has a significant role for methane production, and thus the need to consider the by-products as reactant for the optimization of catalysts composition for DBD plasma-catalysis., Authors thank Generalitat de Catalunya for financial support through the CERCA Programme, M2E (2017SGR1246) and XaRMAE network. IREC also gratefully acknowledge the funding of this work by CoSin project (COMRDI15-1-0037), funded by ACCIÓ and the European Regional Development Fund (FEDER) under the RIS3CAT Energy Community. ICN2 authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO projectENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. TZ has received funding from the CSC-UAB PhD scholarship program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Porous NiTiO3/TiO2 nanostructures for photocatatalytic hydrogen evolution

  • Xing, Congcong
  • Liu, Yongpeng
  • Zhang, Yu
  • Liu, Junfeng
  • Zhang, Ting
  • Tang, Peng-Yi
  • Arbiol, Jordi
  • Soler, Lluís
  • Sivula, Kevin
  • Guijarro, Néstor
  • Wang, Xiang
  • Li, Junshan
  • Du, Ruifeng
  • Zuo, Yong
  • Cabot, Andreu
  • Llorca, Jordi
We present a strategy to produce porous NiTiO3/TiO2 nanostructures with excellent photocatalytic activity toward hydrogen generation. In a first step, nickel-doped TiO2 needle bundles were synthesized by a hydrothermal procedure. Through the sintering in air of these nanostructures, porous NiTiO3/TiO2 heterostructured rods were obtained. Alternatively, the annealing in argon of the nickel-doped TiO2 needle bundles resulted in NiOx/TiO2 elongated nanostructures. Porous NiTiO3/TiO2 structures were tested for hydrogen evolution in the presence of ethanol. Such porous heterostructures exhibited superior photocatalytic activity toward hydrogen generation, with hydrogen production rates up to 11.5 mmol h−1 g−1 at room temperature. This excellent performance is related here to the optoelectronic properties and geometric parameters of the material., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through projects ENE2016-77798-C4-3-R and ENE2015-63969-R. Y. L. and N. G. thank the Swiss National Science Foundation (SNF) for funding under the Ambizione Energy grant no. PZENP2_166871. J.L. is a Serra Hunter fellow and is grateful to ICREA Academia program and GC 2017 SGR 128. T. Z., P.·Y. T. and J. A. acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV-2013-0295) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. C. C. X., Y. Z and T. Z. thank the China Scholarship Council for scholarship support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust one-pot synthesis of citrate-stabilized Au@CeO2 hybrid nanocrystals with different thickness and dimensionality

  • Bastús, Neus G.
  • Piella, Jordi
  • Perez, Sara
  • Patarroyo, Javier
  • Genç, Aziz
  • Arbiol, Jordi
  • Puntes, Víctor F.
Well-defined colloidal Au@CeO2 hybrid nanocrystals (NCs) comprising different core/shell morphologies have been synthesized via a novel and simple one-pot aqueous approach. The method allows producing hybrid morphologies composed by an active and accessible Au core coated by a porous CeO2 shell with varying shell thickness and dimensionality by simply adjusting the Au3+/Ce3+ precursor ratio. These hybrid NCs are highly monodisperse and well-dispersed in water, showing intense surface plasmon resonance bands that offer unique opportunities for advanced material applications, such as plasmonics and catalysis., We acknowledge financial support from the Spanish MINECO (MAT2015-70725-R, ENE2017-85087-C3) and from the Catalan Agència de Gestió d’Ajuts Universitaris i de Recerca (AGAUR) (2017-SGR-1431, 2017-SGR-327). Financial support from the HISENTS (685817) Project financed by the European Community under H20202 Capacities Programme is gratefully acknowledged. N.G.B. acknowledges financial support by MINECO through the Ramon y Cajal program (RYC-2012-10991). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Degree and Ph.D. program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of boron and phosphorus in enhanced electrocatalytic oxygen evolution by nickel borides and nickel phosphides

  • Masa, Justus
  • Andronescu, Corina
  • Antoni, Hendrik
  • Sinev, Ilya
  • Seisel, Sabine
  • Elumeeva, Karina
  • Barwe, Stefan
  • Martí-Sànchez, Sara
  • Arbiol, Jordi
  • Roldán Cuenya, Beatriz
  • Muhler, Martin
  • Schuhmann, Wolfgang
The modification of nickel with boron or phosphorus leads to significant enhancement of its electrocatalytic activity for the oxygen evolution reaction (OER). However, the precise role of the guest elements, B and P, in enhancing the OER of the host element (Ni) remains unclear. Herein, we present insight into the role of B and P in enhancing electrocatalysis of oxygen evolution by nickel borides and nickel phosphides. The apparent activation energy, Ea*, of electrocatalytic oxygen evolution on Ni2P was 78.4 kJ/mol, on Ni2B 65.4 kJ/mol, and on Ni nanoparticles 94.0 kJ/mol, thus revealing that both B and P affect the intrinsic activity of nickel. XPS data revealed shifts of −0.30 and 0.40 eV in the binding energy of the Ni 2p3/2 peak of Ni2B and Ni2P, respectively, with respect to that of pure Ni at 852.60 eV, thus indicating that B and P induce opposite electronic effects on the surface electronic structure of Ni. The origin of enhanced activity for oxygen evolution cannot, therefore, be attributed to such electronic modification or ligand effect. Severe changes induced on the nickel lattice, specifically, the Ni‐Ni atomic order and interatomic distances (strain effect), by the presence of the guest atoms seem to be the dominant factors responsible for enhanced activity of oxygen evolution in nickel borides and nickel phosphides., The authors acknowledge support by the BMBF in the framework of the project “NEMEZU” (03SF0497B). SMS acknowledges funding from “Programa Internacional de Becas ”la Caixa“‐Severo Ochoa”. J.A. and S.M.S. acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project VALPEC (ENE2017‐85087‐C3). ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV‐2013‐0295) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Segregation scheme of indium in AlGaInAs nanowire shells

  • Francaviglia, Luca
  • Tütüncüoglu, Gözde
  • Martí-Sànchez, Sara
  • Russo, Enrico di
  • Escobar Steinvall, Simon
  • Segura-Ruiz, Jaime
  • Potts, Heidi
  • Friedl, Martin
  • Rigutti, Lorenzo
  • Arbiol, Jordi
  • Fontcuberta i Morral, Anna
Quaternary alloys enable the independent optimization of different semiconductor properties, such as the separate tuning of the band gap and the lattice constant. Nanowire core-shell structures should allow a larger range of compositional tuning as strain can be accommodated in a more effective manner than in thin films. Still, the faceted structure of the nanowire may lead to local segregation effects. Here, we explore the incorporation of indium in AlGaAs shells up to 25%. In particular, we show the effect of In incorporation on the energy shift of the AlGaInAs single-photon emitters present in the shell. We observe a redshift up to 300 meV as a function of the group-III site fraction of In. We correlate the shift with segregation at the nanoscale. We find evidence of the segregation of the group-III elements at different positions in the nanowire, not observed before. We propose a model that takes into account the strain distribution in the nanowire shell and the adatom diffusion on the nanowire facets to explain the observations. This work provides novel insights on the segregation phenomena necessary to engineer the composition of multidinary alloys., JSR thanks the European H2020 for funding through grant LIMQUET. EDR and LR thank Labex EMC3 AQURATE (French ANR). SMS acknowledges funding from “Programa Internacional de Becas ‘la Caixa’-Severo Ochoa.” JA and SMS acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant No. SEV-2013-0295) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. This work has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement No. 654360 NFFA-Europe., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solution-processed ultrathin SnS2−Pt nanoplates for photoelectrochemical water oxidation

  • Zuo, Yong
  • Liu, Yongpeng
  • Li, Junshan
  • Du, Ruifeng
  • Yu, Xiaoting
  • Xing, Congcong
  • Zhang, Ting
  • Yao, Liang
  • Arbiol, Jordi
  • Llorca, Jordi
  • Sivula, Kevin
  • Guijarro, Néstor
  • Cabot, Andreu
Tin disulfide (SnS2) is attracting significant interest because of the abundance of its elements and its excellent optoelectronic properties in part related to its layered structure. In this work, we specify the preparation of ultrathin SnS2 nanoplates (NPLs) through a hot-injection solution-based process. Subsequently, Pt was grown on their surface via in situ reduction of a Pt salt. The photoelectrochemical (PEC) performance of such nanoheterostructures as photoanode toward water oxidation was tested afterwards. Optimized SnS2–Pt photoanodes provided significantly higher photocurrent densities than bare SnS2 and SnS2-based photoanodes of previously reported study. Mott–Schottky analysis and PEC impedance spectroscopy (PEIS) were used to analyze in more detail the effect of Pt on the PEC performance. From these analyses, we attribute the enhanced activity of SnS2–Pt photoanodes reported here to a combination of the very thin SnS2 NPLs and the proper electronic contact between Pt nanoparticles (NPs) and SnS2., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R) and VALPEC (ENE2017-85087-C3). Y.Z., J.L., R.D., X.T., and T.Z. thank China Scholarship Council for scholarship support. Y.L. and N.G. thank the Swiss National Science Foundation (SNF) for funding under the Ambizione Energy grant no. PZENP2_166871. J.L. is a Serra Húnter Fellow and is grateful to ICREA Academia program and grants MINECO/FEDER ENE2015-63969-R and GC 2017 SGR 128. T.Z. and J.A. acknowledge funding from Generalitat de Catalunya 2017 SGR 327. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, grant no. SEV-2013-0295). IREC and ICN2 are funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Seeded-growth aqueous synthesis of colloidal-stable citrate-stabilized Au/CeO2 hybrid nanocrystals: Heterodimers, core@shell, and clover- and star-like structures

  • Piella, Jordi
  • Gónzalez-Febles, Ana
  • Patarroyo, Javier
  • Arbiol, Jordi
  • Bastús, Neus G.
  • Puntes, Víctor F.
Well-defined colloidal-stable citrate-stabilized Au/CeO2 hybrid nanocrystals (NCs) with coherent quasi-epitaxial interfaces and unprecedented control of their architectural and morphological characteristics have been synthesized via a novel and straightforward seeded-growth aqueous approach. The synthetic strategy, based on the identification of the experimental conditions under which the heterogeneous nucleation and growth processes of CeO2 onto presynthesized Au are controlled, allows for the fine adjustment of each individual domain in the structure, particularly the size of the Au core (from 5 to 100 nm), the thickness of the CeO2 shell (from 5 to 20 nm), and the growth mode of CeO2 onto Au NCs (from core@shell to heterodimer, clover- and star-like structures). This morphological control is achieved by the rational use of sodium citrate, which plays multiple key roles, as a reducer and stabilizing agent in the preparation of Au NCs, and as a complexing agent of Ce3+ for its controlled oxidation and hydrolysis during the subsequent CeO2 deposition. The resultant Au/CeO2 NCs remain stable and well-dispersed in water, allowing us to study the impact of fine variations of the NC structure on the underlying optical response. This level of morphological control, as well as the ease by which such well-defined nanostructures are produced, opens new opportunities for systematically investigating the interactions between individual components in designing more advanced complex NCs. Remarkably, because no organic solvents are used and no toxic waste is formed during the reaction, the proposed synthesis method can be defined as sustainable, viable, and cost-effective., We acknowledge financial support from the Spanish MINECO (MAT2015-70725-R, ENE2017-85087-C3), MICINN (RTI2018-099965-B-I00), and from the Catalan Agencia de Gestió d’Ajuts Universitaris i de Recerca (AGAUR) (2017-SGR-1431, 2017-SGR-327). Financial support from the HISENTS (685817) Project financed by the European Community under H20202 Capacities Programme is gratefully acknowledged. N.G.B. acknowledges financial support by MINECO through the Ramon y Cajal program (RYC-2012-10991). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autonoma de Barcelona Degree and Ph.D. program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailor-made metal-nitrogen-carbon bifunctional electrocatalysts for rechargeable Zn-air batteries via controllable MOF units

  • Zhang, Xuan
  • Luo, Jiangshui
  • Lin, Heng-Fu
  • Tang, Peng-Yi
  • Morante, Joan Ramón
  • Arbiol, Jordi
  • Wan, Kai
  • Mao, Bing-Wei
  • Liu, Li-Min
  • Fransaer, Jan
The majority of chemical syntheses involve the use of catalysts, which play a crucial role in the yield and conversion rates of chemical reactions. In view of the increasing demand for chemical commodities and specialties linked to the growth of the world's population and the living standards, highly efficient and low-cost catalysts are urgently required. The metal-nitrogen-carbon (M-N-C) catalysts family is one of the most promising candidates. In this work, a series of benzene-1,3,5-tricarboxylate linker based metal organic frameworks (MOFs) were used as self-sacrificial templates and tunable platform for designable preparation of M-N-C catalysts. Changing the pillars between the 2D layers and the nature of the metal ions in the pristine MOFs significantly influenced the structure, chemical composition and catalytic activity of the resulting M-N-C catalysts for the oxygen reduction reaction (ORR). Furthermore, the influence of the MOF units on the catalyst performance, the role of the metals in the M-N-C catalysts and the primary catalytically active sites for ORR were explored by a combination of density functional theory (DFT), in-depth structural and chemical/elemental characterizations, and electrochemical studies. Among the prepared catalysts, Co-BTC-bipy-700 exhibited the highest electrocatalytic activity for oxygen reduction reaction (ORR), which showed a larger limiting current density and similar half-wave potentials with less catalyst degradation and much higher methanol tolerance than the commercial Pt/C catalyst. Meanwhile, as a bifunctional electrocatalyst, Co-BTC-bipy-700 catalyst was also employed for oxygen evolution reaction (OER) and demonstrated a lower overpotential (lowered by 140 mV at a current density of 10 mA cm−2) and better durability than IrO2. Furthermore, in terms of device performance, the Zn-air battery enabled by Co-BTC-bipy-700 catalyst reached a maximum specific energy as high as 1009.8 Wh kg−1, which is 76.5% of the theoretical value (1320 Wh kg−1), and demonstrated higher discharge potential and lower charge potential than that based on the Pt/C catalyst. Importantly, the presented strategy for tailor-made M-N-C catalysts by controlling the synthesis of the pristine MOFs could offer a guide map for the future design of M-N-C catalysts family not only for electrochemical reactions but also beyond electrochemistry., X. Zhang is grateful to China Scholarship Council (China). J. Luo acknowledges the Research Foundation – Flanders (FWO, Belgium) for a Research Project (G0B3218N), Research Grant (1529816N) and a travel grant (V410316N) for a Visiting Professorship at the Technical University of Denmark. Heng-Fu Lin acknowledges the National Natural Science Foundation of China (11747154) and Tianhe-2JK computing time allocation at the Beijing Computational Science Research Center (CSRC, China). ICN2 and IREC acknowledge, respectively, funding from Generalitat de Catalunya 2017 SGR 327 and 1246 (Spain); the Spanish MINECO coordinated project VALPEC (ENE2017-85087-C3), Spain. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV-2013-0295, SEV-2017-0706), Spain. Likewise, ICN2 and IREC are funded by the CERCA Programme / Generalitat de Catalunya, Spain. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. JRM is belonging to University of Barcelona. Funding from the National Natural Science Foundation of China (No. 21776120, China), "Minjiang Scholar" Program and key project (No. JZ160480, China) of Department of Education, Fujian Province, China, and Open Project (No. 201607, China) of State Key Laboratory of Physical Chemistry of Solid Surfaces, Xiamen University is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The role of polarity in nonplanar semiconductor nanostructures

  • Mata, Maria de la
  • Zamani, Reza
  • Martí-Sànchez, Sara
  • Eickhoff, Martin
  • Xiong, Qihua
  • Fontcuberta i Morral, Anna
  • Caroff, Philippe
  • Arbiol, Jordi
The lack of mirror symmetry in binary semiconductor compounds turns them into polar materials, where two opposite orientations of the same crystallographic direction are possible. Interestingly, their physical properties (e.g., electronic or photonic) and morphological features (e.g., shape, growth direction, and so forth) also strongly depend on the polarity. It has been observed that nanoscale materials tend to grow with a specific polarity, which can eventually be reversed for very specific growth conditions. In addition, polar-directed growth affects the defect density and topology and might induce eventually the formation of undesirable polarity inversion domains in the nanostructure, which in turn will affect the photonic and electronic final device performance. Here, we present a review on the polarity-driven growth mechanism at the nanoscale, combining our latest investigation with an overview of the available literature highlighting suitable future possibilities of polarity engineering of semiconductor nanostructures. The present study has been extended over a wide range of semiconductor compounds, covering the most commonly synthesized III–V (GaN, GaP, GaAs, GaSb, InN, InP, InAs, InSb) and II–VI (ZnO, ZnTe, CdS, CdSe, CdTe) nanowires and other free-standing nanostructures (tripods, tetrapods, belts, and membranes). This systematic study allowed us to explore the parameters that may induce polarity-dependent and polarity-driven growth mechanisms, as well as the polarity-related consequences on the physical properties of the nanostructures., ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO coordinated project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. S.M.S. acknowledges funding from “Programa Internacional de Becas “la Caixa”-Severo Ochoa”. The HAADF-STEM experiments were conducted in the Laboratorio de Microscopias Avanzadas at Instituto de Nanociencia de Aragon-Universidad de Zaragoza. A.F.i.M. thanks SNSF for funding through the NCCR QSIT. This work has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under grant agreement No. 654360 NFFA-Europe. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 823717 – ESTEEM3., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning transport properties in thermoelectric nanocomposites through inorganic ligands and heterostructured building blocks

  • Ibáñez, María
  • Genç, Aziz
  • Hasler, Roger
  • Liu, Yu
  • Dobrozhan, Oleksandr
  • Nazarenko, Olga
  • Mata, Maria de la
  • Arbiol, Jordi
  • Cabot, Andreu
  • Kovalenko, Maksym V.
Methodologies that involve the use of nanoparticles as “artificial atoms” to rationally build materials in a bottom-up fashion are particularly well-suited to control the matter at the nanoscale. Colloidal synthetic routes allow for an exquisite control over such “artificial atoms” in terms of size, shape, and crystal phase as well as core and surface compositions. We present here a bottom-up approach to produce Pb–Ag–K–S–Te nanocomposites, which is a highly promising system for thermoelectric energy conversion. First, we developed a high-yield and scalable colloidal synthesis route to uniform lead sulfide (PbS) nanorods, whose tips are made of silver sulfide (Ag2S). We then took advantage of the large surface-to-volume ratio to introduce a p-type dopant (K) by replacing native organic ligands with K2Te. Upon thermal consolidation, K2Te-surface modified PbS–Ag2S nanorods yield p-type doped nanocomposites with PbTe and PbS as major phases and Ag2S and Ag2Te as embedded nanoinclusions. Thermoelectric characterization of such consolidated nanosolids showed a high thermoelectric figure-of-merit of 1 at 620 K., This work was financially supported by the European Union (EU) via FP7 ERC Starting Grant 2012 (Project NANOSOLID, GA No. 306733). M.I. was supported by IST Austria and by ETH Zurich via an ETH career seed grant (SEED-18 16-2). Y.L. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No. 754411. IREC receives funding from Generalitat de Catalunya (2014SGR1638). ICN2 acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Upscaling high activity oxygen evolution catalysts based on CoFe2O4 nanoparticles supported on nickel foam for power-to-gas electrochemical conversion with energy efficiencies above 80%

  • Urbain, Félix
  • Du, Ruifeng
  • Tang, Peng-Yi
  • Smirnov, Vladimir
  • Andreu, Teresa
  • Finger, Friedhelm
  • Divins, Núria J.
  • Llorca, Jordi
  • Arbiol, Jordi
  • Cabot, Andreu
  • Morante, Joan Ramón
We investigate cobalt ferrite nanoparticles (NPs) supported on large-scale electrodes as oxygen evolution reaction (OER) catalysts. Colloidal CoFe2O4 NPs were loaded on low-cost and high surface area nickel foam (NF) scaffolds. The coating process was optimized for large electrode areas, ensuring a proper distribution of the NPs on the NF that allowed overcoming the electrical conductivity limitations of oxide NPs. We were able to produce CoFe2O4-coated NFs having 10 cm2 geometric surface areas with overpotentials below 300 mV for the OER at a current density of 50 mA/cm2. Such impressively low overpotentials suggested using CoFe2O4 NP-based electrodes within a water electrolysis device. In this prototype device, stable operating currents up to 500 mA at remarkably low cell-voltages of 1.62 and 1.53 V, at ambient and 50 °C electrolyte temperatures, respectively, were reached during operation periods of up to 50 h. The high electrochemical energy efficiencies reached at 50 mA/cm2, 75% and 81% respectively, rendered these devices particularly appealing to be combined with low-cost photovoltaic systems for bias-free hydrogen production. Therefore, CoFe2O4 NP-based electrolysers were coupled to low-cost thin-film silicon solar cells with 13% efficiency to complete a system that afforded solar-to-fuel efficiencies above 10%., Authors acknowledge funding from Generalitat de Catalunya through the CERCA program, 2017 SGR 1246, 2017 SGR 327 and the Spanish MINECO projects MAT2014-59961, ENE2016-80788-C5-5-R, ENE2016-77798-C4-3-R and ENE2017-85087, together with the support from Repsol S. A. Likewise, the authors thank Enagás S.A. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). IREC also acknowledges additional support from the European Regional Development Funds (ERDF, FEDER), (S)TEM part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program and the rest in the Nanoscience program of the University of Barcelona. The authors thank S. Moll (IEK-5), M. Biset-Peiró (IREC), and H. Xie (IREC) for their contribution to this work. F.U. acknowledges financial support from MINECO through Juan de la Cierva fellowship (FJCI-2016-29147).V.S. and F.F. (authors from IEK-5) thank the Deutsche Forschungsgemeinschaft (DFG) (Priority Program SPP 1613). J. Llorca is a Serra Húnter Fellow and is grateful to ICREA Academia program and funding from Generalitat de Catalunya 2017 SGR 128., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High magnetic coercivity in nanostructured Mn3O4 thin films obtained by chemical vapor deposition

  • Bigiani, Lorenzo
  • Hassan, Marian
  • Peddis, Davide
  • Maccato, Chiara
  • Varvaro, Gaspare
  • Sada, Cinzia
  • Bontempi, Elza
  • Martí-Sànchez, Sara
  • Arbiol, Jordi
  • Barreca, Davide
Nanostructured α-Mn3O4 (haussmannite) thin films consisting of evenly interconnected nanoaggregates were prepared on Si(100) substrates by chemical vapor deposition from a Mn(II) diketonate-diamine precursor under different reaction atmospheres (dry vs wet O2) and total operating pressures. The combination of chemico-physical results obtained by the joint use of complementary techniques enabled us to demonstrate the obtainment of high-purity Mn3O4 materials free from other manganese oxide phases, characterized by controllable structural and morphological characteristics as a function of the adopted processing conditions. Magnetic properties were investigated by analyzing temperature dependence (i.e., field-cooled and zero-field-cooled measurements) and field-dependence of the magnetization behavior. The obtained films show bulk-like magnetic properties, together with extraordinarily high low-temperature in-plane coercivities (up to ∼1 T). The possibility to tailor these values by varying the content of microstructural defects may foster the implementation of the obtained films in eventual technological applications., The authors thank Padova University DOR 2016–2018 and P-DiSC #03BIRD2016-UNIPD projects. Funding from Generalitat de Catalunya 2017 SGR 327, the Spanish MINECO ENE2017-85087-C3-3-R, and Severo Ochoa Program SEV-2017-0706, as well as CERCA Programme/Generalitat de Catalunya is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Superior methanol electrooxidation performance of (110)-faceted nickel polyhedral nanocrystals

  • Li, Junshan
  • Zuo, Yong
  • Liu, Junfeng
  • Wang, Xiang
  • Yu, Xiaoting
  • Du, Ruifeng
  • Zhang, Ting
  • Infante-Carrió, Maria F.
  • Tang, Peng-Yi
  • Arbiol, Jordi
  • Llorca, Jordi
  • Luo, ZhiShan
  • Cabot, Andreu
We present the synthesis of (110)-faceted nickel polyhedral nanocrystals (NCs) and their characterization as electrocatalysts for the methanol oxidation reaction (MOR). Ni NCs were produced at 180 °C through the reduction in solution of a Ni salt. They were combined with carbon black and Nafion and deposited over glassy carbon to study their electrocatalytic properties. Electrodes based on (110)-faceted Ni NCs displayed a first order reaction with KOH in the concentration range from 0.1 M to 1.0 M. These electrodes were characterized by higher coverages of active species, but lower diffusion coefficients of the species limiting the reaction rate when compared with electrodes prepared from spherical Ni NCs. Overall, electrodes based on faceted Ni NCs displayed excellent performance with very high current densities, up to 61 mA cm−2, and unprecedented mass activities, up to 2 A mg−1, at 0.6 V vs. Hg/HgO in 1.0 M KOH containing 1.0 M methanol. These electrodes also displayed a notable stability. While they suffered an activity loss of ca. 30% during the first 10 000 s of operation, afterward activity stabilized at very high current densities, ∼35 mA cm−2, and mass activities, ∼1.2 A mg−1, with only a 0.5% decrease during operation from 20 000 to 30 000 s., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R) and VALPEC (ENE2017-85087-C3). J. Li and T. Zhang thank the China Scholarship Council (CSC) for scholarship support. T. Zhang and J. Arbiol acknowledge funding from Generalitat de Catalunya 2017 SGR 327. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV-2013-0295). IREC and ICN2 are funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. JL is a Serra Húnter Fellow and is grateful to ICREA Academia program and to Generalitat de Catalunya 2017 SGR 128., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Atomic atom distribution of Ruthenium dispersed on a 2D covalent organic framework for electrocatalytic hydrogen evolution reaction

  • Liang, Zhifu
  • Wang, Xiang
  • Cabot, Andreu
  • Arbiol, Jordi
Resumen del póster presentado al nanoGe Fall Meeting, celebrado en Berlín (Alemania) del 4 al 8 de noviembre de 2019., In recent years, Single-atom catalysis (SAC) has become one of the most research hot topics in heterogeneous catalysis. As it is known, both homogeneous and heterogeneous catalysts are important for the reactions used in chemical industry. In homogeneous catalysis, up to 100% of the atoms may remain active during reactions, while for the in the case of heterogeneous catalysts, only a small fraction of the metal atoms can be utilized due to the aggregation of the atoms when forming clusters. In this way, SACs have the benefits of homogeneous and heterogeneous catalysts. In our case, we will use a 2D covalent organic framework (COF), which is a π-conjugated microporous polymer with a high stability, designability and crystallinity. In addition, contains a high number of pyridinic nitrogen which will not only be used for anchoring the metal atoms, but also as an active site for the catalytic reaction. Here we propose a single atom ruthenium catalysts on a 2D COF for improved electrocatalytic hydrogen evolution reaction., This work was supported by the European Regional Development Fund and by the Spanish Ministerio de Ciencia, Innovación y Universidades through the project SEHTOP (ENE 2016-77798-C4-3-R). This poster is funded by FEDER/Ministerio de Ciencia, Innovación y Universidades – Agencia Estatal de Investigación (ENE2017-85087-C3-3-R). Z.Liang. are grateful for financial support from Severo Ochoa Fellowship SEV-2013-0295. W Xiang and D Yang. thanks the China Scholarship Council. ICN2 is supported by the Severo Ochoa programme funded by AEI (Grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Cluster beam deposition for precise heterogeneous catalysts

  • Spadaro, Maria Chiara
  • Martínez, L.
  • Rongsheng, C.
  • Niu, Y.
  • Huttel, Yves
  • Palmer, R.
  • Arbiol, Jordi
Resumen del trabajo presentado al Microscopy at the Frontiers of Science Congress Series (MFS), celebrado en el Parque de las Ciencias de Granada (España) del 11 al 13 de septiembre de 2019., This project has received funding the EU H2020 project CritCat (project ID: 686053). MCS has received funding from the European Union‟s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 754510 (PROBIST). ICN2 acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme-Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Combined high catalytic activity and efficient polar tubular nanostructure in urchin-like metallic NiCo2Se4 for high-performance lithium–sulfur batteries

  • Zhang, Ting
  • Zhang, Chaoqi
  • Jacas Biendicho, Jordi
  • Yang, Xuhui
  • Zhou, Yingtang
  • Morante, Joan Ramón
  • Cabot, Andreu
  • Arbiol, Jordi
Resumen del póster presentado al nanoGe Fall Meeting, celebrado en Berlín (Alemania) del 4 al 8 de noviembre de 2019., To realize fast-growing field of electric vehicles, rechargeable lithium-sulfur batteries (LSBs) have recently emerged as one of the most exciting alternatives to lithium-ion batteries (LIBs) owing to their higher theoretical energy density, 6 times higher than LIBs and lower cost. However, a poor utilization of the active material involved by the electrical insulating character of sulfur and lithium sulfides and a rapid degradation during charge/discharge processes still limit their practical application. Therefore, in this work, an urchin-shaped NiCo2Se4 (u-NCSe) nanostructures as efficient sulfur hosts were synthesized to overcome the limitations of lithium-sulfur batteries (LSBs) using selenization of Ni0.33Co0.67(CO3)0.5OH precursor. The u-NCSe showed a hollow structure with different distribution of Ni, Co and Se, which was proved by electron energy loss spectroscopy (EELS). Meanwhile, the high-resolution transmission electron microscopy (HRTEM) images indicated that the NiCo2Se4 nanostructures had a good crystallinity, in agreement with the cubic phase of NiCo2Se4 (space group: C12/m1). Owing to the hollow structure that can relieve volumetric expansion, a superior electrical conductivity to improve electron transfer, a high polarity to promote absorption of lithium polysulfides (LiPS), and outstanding electrocatalytic activity to accelerate LiPS conversion kinetics, S@u-NCSe delivers outstanding initial capacities up to 1403 mAh/g at 0.1 C and retains 626 mAh/g at 5 C with exceptional rate performance. More significantly, a very low capacity decay rate of only 0.016% per cycle is obtained after 2000 cycles at 3 C. Even at high sulfur loading (3.2 mg/cm2), a reversible capacity of 557 mAh/g is delivered after 600 cycles at 1 C. Density functional theory calculations further confirm the strong interaction between NCSe and LiPS, and cytotoxicity measure-ments prove the biocompatibility of NCSe. This work not only demonstrates that transition metal selenides can be promising candidates as sulfur host materials, but also provides a strategy for the rational design and the development of LSBs with long-life and high-rate electrochemical performance., This work corresponds to an extension of activities initially performed around the objectives defined by the Helis project which received funding from the European Union’s Horizon 2020 program under the Grant Agreement No. 666221. The authors acknowledge funding from Generalitat de Catalunya2017 SGR 1246 and 2017 SGR 327, the Spanish MINECO projects ENE2016-77798-C4-3-R and ENE2017-85087-C3, and the Zhou Shan Science and Technology Project (2018C21010). C. Zhang and T. Zhang thank the China Scholarship Council (CSC) for scholarship support. IREC acknowledges funding from European Regional Development Funds (ERDF-FEDER Programa Competitivitat de Catalunya 2007–2013). ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and was funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. This poster is funded by FEDER/Ministerio de Ciencia, Innovación y Universidades – Agencia Estatal de Investigación (ENE2017-85087-C3-3-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rhodium as efficient additive for boosting acetone sensing by TiO2 nanocrystals. Beyond the classical view of noble metal additives

  • Epifani, Mauro
  • Kaciulis, Saulius
  • Mezzi, Alessio
  • Zhang, Ting
  • Arbiol, Jordi
  • Siciliano, Pietro
  • Landström, Anton
  • Concina, Isabella
  • Moumen, Abderrahim
  • Comini, Elisabetta
  • Xiangfeng, Chu
Anatase TiO2 nanocrystals were prepared by solvothermal synthesis and modified by in- situ generated Rh nanoparticles, with a starting nominal Rh:Ti atomic concentration of 0.01 and 0.05. After heat-treatment at 400 °C the TiO2 host was still in the anatase crystallographic phase, embedding Rh nanoparticles homogeneously distributed and whose surface had been oxidized to Rh2O3, as established by X-ray diffraction, Transmission Electron Microscopy and X-ray Photoelectron spectroscopy. Moreover, Rh seemed also homogeneously distributed in elemental form or as Rh2O3 nanoclusters. The acetone sensing properties of the resulting materials were enhanced by Rh addition, featuring a response increase of one order of magnitude at the best operating temperature of 300 °C. Moreover, Rh addition enlarged the detection range down to 10 ppm whereas pure TiO2 was not able of giving an appreciable response already at a concentration as high as 50 ppm. From the sensing data, the enhancement of the sensor response was attributed to the finely dispersed Rh species and not to the oxidized Rh nanocrystals., ICN2 acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme / Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. TZ has received funding from the CSC-UAB PhD scholarship program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding galvanic replacement reactions: the case of Pt and Ag

  • Merkoçi, Florind
  • Patarroyo, Javier
  • Russo, Lorenzo
  • Piella, Jordi
  • Genç, Aziz
  • Arbiol, Jordi
  • Bastús, Neus G.
  • Puntes, Víctor F.
Synthesis of nanocrystals (NCs), where material science elements are addressed with organic chemistry precision techniques, is especially challenging and difficult to control. This difficulty arises from the increased complexity of the mineralization processes and the generation of a liquid-solid interface. These aspects, along with a strong susceptibility to reaction kinetics, ultimately translate into serious challenges for reproducibility and morphological control. By systematically varying the different parameters used to control the morphology of NCs, including complexing agents, coreducers, and cooxidants, the general reaction landscape can be mapped and the most stable and reproducible recipes can be identified. We apply this concept to the model transmetallation reaction between immiscible Pt and Ag forming hollow Pt NCs by galvanic replacement reactions. In this work, 648 synthetic recipes were performed and characterized per duplicate, from which a subset of 307 recipes leading to the controlled formation of hollow NCs were further analyzed to correlate reaction conditions with the final obtained structure and stability (reproducibility). As a result, we present robust general synthetic protocols leading to the ad hoc production of Pt-based hollow NCs with independent control of shell thickness, void size, surface roughness, and degree of porosity., The authors acknowledge financial support from the Spanish Ministerio de Economia y Competitividad (MINECO) (MAT2015-70725-R, ENE2017-85087-C3), Ministerio de Ciencia, Innovación y Universidades (MCIU) (RTI2018-099965-B-I00, AEI/FEDER,UE) and from the Catalan Agència de Gestió d'Ajuts Universitaris i de Recerca (AGAUR) (2017-SGR-1431, 2017-SGR-327). N.G.B. acknowledges financial support by MINECO through the Ramon y Cajal program (RYC-2012- 10991). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lead sulfide nanocubes for solar energy storage

  • Lemsi, Amira
  • Cardenas-Morcoso, Drialys
  • Haro, Marta
  • Gil-Barrachina, Carlos
  • Aranda, Clara
  • Maghraoui-Meherzi, Hager
  • García-Tecedor, Miguel
  • Giménez, Sixto
  • Julián-López, Beatriz
Lead sulfide (PbS) nanocubes are produced by a very simple solvothermal procedure that uses a unique molecule, ethylenediamine, as solvent and capping ligand to control the size and shape of the nanocrystals. Detailed structural, optical, and photoelectrochemical evaluation confirms the suitability of these nanoparticles for photocapacitive applications, when synergistically combined with spin‐coated BiVO4 photoelectrodes, as derived from the estimated energy diagram. Furthermore, the p–n junction facilitates the photo‐oxidation of PbS nanoparticles under light irradiation. In the dark, the photogenerated charges are released providing an electric output response with a solar‐to‐current efficiency of 0.042%, storing extra energy to the H2 produced by water splitting when the BiVO4 photoanode works under illumination. Herein, the importance of the synthetic route and methodology to ensemble materials for advanced solar energy storage applications is highlighted., We acknowledge financial support from the Ministerio de Ciencia, Innovación y Universidades, Spain through the project number ENE2017‐85087‐C3‐1‐R and Ramon y Cajal Fellowship (grant no. RYC‐2018‐025222‐I). Universitat Jaume I is also acknowledged for funding (project UJI—B2018‐71). Université de Tunis El‐Manar also acknowledges the Tunisian Ministry of Higher Education and Scientific Research (MHESR) for the financial support of this work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hollow PdAg-CeO2 heterodimer nanocrystals as highly structured heterogeneous catalysts

  • Patarroyo, Javier
  • Delgado, Jorge A.
  • Merkoçi, Florind
  • Genç, Aziz
  • Sauthier, Guillaume
  • Llorca, Jordi
  • Arbiol, Jordi
  • Bastús, Neus G.
  • Godard, Cyril
  • Claver, Carmen
  • Puntes, Víctor F.
In the present work, hollow PdAg-CeO2 heterodimer nanocrystals (NCs) were prepared and tested as catalysts for the selective hydrogenation of alkynes. These nanostructures combine for the first time the beneficial effect of alloying Pd with Ag in a single NC hollow domain with the formation of active sites at the interface with the CeO2 counterpart in an additive manner. The PdAg-CeO2 NCs display excellent alkene selectivity for aliphatic alkynes. For the specific case of hydrogenation of internal alkynes such as 4-octyne, very low over-hydrogenation and isomerization products were observed over a full conversion regime, even after prolonged reaction times. These catalytic properties were remarkably superior in comparison to standard catalysts. The promotion of Ag on the moderation of the reactivity of the Pd phase, in combination with the creation of interfacial sites with the CeO2 moiety in the same nanostructure, is pointed as the responsible of such a remarkable catalytic performance., We acknowledge financial support from the Spanish MINECO (MAT2015-70725-R, ENE2017-85087-C3, CTQ2016-75016-R, AEI/FEDER, UE), MCIU (RTI2018-099965-B-I00, AEI/FEDER,UE) and from Generalitat de Catalunya (2017-SGR-1431, 2017-SGR-327, 2017-SGR-128). Financial support from the HISENTS (685817) Project financed by the European Community under H2020 Capacities Programme is gratefully acknowledged. N.G.B. acknowledges financial support by MINECO through the Ramon y Cajal program (RYC-2012- 10991). JL is a Serra Húnter Fellow and is grateful to ICREA Academia program. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3D ordering at the liquid–solid polar interface of nanowires

  • Zamani, Mahdi
  • Imbalzano, Giulio
  • Tappy, Nicolas
  • Alexander, Duncan T. L.
  • Martí-Sànchez, Sara
  • Ghisalberti, Lea
  • Ramasse, Quentin M.
  • Friedl, Martin
  • Tütüncüoglu, Gözde
  • Francaviglia, Luca
  • Bienvenue, Sebastien
  • Hébert, Cécile
  • Arbiol, Jordi
  • Ceriotti, Michele
  • Fontcuberta i Morral, Anna
The nature of the liquid–solid interface determines the characteristics of a variety of physical phenomena, including catalysis, electrochemistry, lubrication, and crystal growth. Most of the established models for crystal growth are based on macroscopic thermodynamics, neglecting the atomistic nature of the liquid–solid interface. Here, experimental observations and molecular dynamics simulations are employed to identify the 3D nature of an atomic‐scale ordering of liquid Ga in contact with solid GaAs in a nanowire growth configuration. An interplay between the liquid ordering and the formation of a new bilayer is revealed, which, contrary to the established theories, suggests that the preference for a certain polarity and polytypism is influenced by the atomic structure of the interface. The conclusions of this work open new avenues for the understanding of crystal growth, as well as other processes and systems involving a liquid–solid interface., M.Z., N.T., and A.F.i.M. were supported by SNF Back‐Up Schemes Consolidator Grant Nos. BSC‐GI0_157705 and NCCR QSIT, G.I. and M.C. were supported by the NCCR MARVEL, funded by the Swiss National Science Foundation. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017‐85087‐C3. ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV‐2017‐0706) and was funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work was performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. S.M.‐S. acknowledges funding from “Programa Internacional de Becas “la Caixa”‐Severo Ochoa.” The authors acknowledge support from CSIC Research Platform on Quantum Technologies PTI‐001. SuperSTEM is the UK National Research Facility for Advanced Electron Microscopy, supported by the Engineering and Physical Sciences Research Council (EPSRC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bismuth telluride–copper telluride nanocomposites from heterostructured building blocks

  • Zhang, Yu
  • Liu, Yu
  • Calcabrini, Mariano
  • Xing, Congcong
  • Han, Xu
  • Arbiol, Jordi
  • Cadavid, Doris
  • Ibáñez, María
  • Cabot, Andreu
Appropriately designed nanocomposites allow improving the thermoelectric performance by several mechanisms, including phonon scattering, modulation doping and energy filtering, while additionally promoting better mechanical properties than those of crystalline materials. Here, a strategy for producing Bi2Te3–Cu2−xTe nanocomposites based on the consolidation of heterostructured nanoparticles is described and the thermoelectric properties of the obtained materials are investigated. We first detail a two-step solution-based process to produce Bi2Te3–Cu2−xTe heteronanostructures, based on the growth of Cu2−xTe nanocrystals on the surface of Bi2Te3 nanowires. We characterize the structural and chemical properties of the synthesized nanostructures and of the nanocomposites produced by hot-pressing the particles at moderate temperatures. Besides, the transport properties of the nanocomposites are investigated as a function of the amount of Cu introduced. Overall, the presence of Cu decreases the material thermal conductivity through promotion of phonon scattering, modulates the charge carrier concentration through electron spillover, and increases the Seebeck coefficient through filtering of charge carriers at energy barriers. These effects result in an improvement of over 50% of the thermoelectric figure of merit of Bi2Te3., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R). Y. Z. and X. H., thank the China Scholarship Council for scholarship support. M. C. has received funding from the European Union's Horizon 2020 Research and Innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 665385. M. I. acknowledges financial support from IST Austria. Y. L. acknowledges funding from the European Union's Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie grant agreement no. 754411. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phosphorous incorporation in Pd2Sn alloys for electrocatalytic ethanol oxidation

  • Yu, Xiaoting
  • Liu, Junfeng
  • Li, Junshan
  • Luo, ZhiShan
  • Zuo, Yong
  • Xing, Congcong
  • Llorca, Jordi
  • Nasiou, Déspina
  • Arbiol, Jordi
  • Pan, Kai
  • Kleinhanns, Tobias
  • Xie, Ying
  • Cabot, Andreu
Direct ethanol fuel cells (DEFCs) show a huge potential to power future electric vehicles and portable electronics, but their deployment is currently limited by the unavailability of proper electrocatalysis for the ethanol oxidation reaction (EOR). In this work, we engineer a new electrocatalyst by incorporating phosphorous into a palladium-tin alloy and demonstrate a significant performance improvement toward EOR. We first detail a synthetic method to produce Pd2Sn:P nanocrystals that incorporate 35% of phosphorus. These nanoparticles are supported on carbon black and tested for EOR. Pd2Sn:P/C catalysts exhibit mass current densities up to 5.03 A mgPd−1, well above those of Pd2Sn/C, PdP2/C and Pd/C reference catalysts. Furthermore, a twofold lower Tafel slope and a much longer durability are revealed for the Pd2Sn:P/C catalyst compared with Pd/C. The performance improvement is rationalized with the aid of density functional theory (DFT) calculations considering different phosphorous chemical environments. Depending on its oxidation state, surface phosphorus introduces sites with low energy OH− adsorption and/or strongly influences the electronic structure of palladium and tin to facilitate the oxidation of the acetyl to acetic acid, which is considered the EOR rate limiting step. DFT calculations also points out that the durability improvement of Pd2Sn:P/C catalyst is associated to the promotion of OH adsorption that accelerates the oxidation of intermediate poisoning COads, reactivating the catalyst surface., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP, ENE2016- 77798-C4-3-R, and ENE2017-85087-C3. X. Y. thanks the China Scholarship Council for the scholarship support. J. Liu acknowledges support from the Jiangsu University Foundation (4111510011). J. Li obtained International Postdoctoral Exchange Fellowship Program (Talent-Introduction program) in 2019 and is grateful for the project (2019M663468) funded by the China Postdoctoral Science Foundation. Authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246, and from IST Austria. ICN2 acknowledges the support from the Severo Ochoa Programme (MINECO, grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. J. Llorca is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128 and to ICREA Academia program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selective methanol‐to‐formate electrocatalytic conversion on branched nickel carbide

  • Li, Junshan
  • Wei, Ruilin
  • Zuo, Yong
  • Han, Xu
  • Arbiol, Jordi
  • Llorca, Jordi
  • Yang, Yaoyue
  • Cabot, Andreu
  • Cui, Chunhua
A methanol economy will be favored by the availability of low‐cost catalysts able to selectively oxidize methanol to formate. This selective oxidation would allow extraction of the largest part of the fuel energy while concurrently producing a chemical with even higher commercial value than the fuel itself. Herein, we present a highly active methanol electrooxidation catalyst based on abundant elements and with an optimized structure to simultaneously maximize interaction with the electrolyte and mobility of charge carriers. In situ infrared spectroscopy combined with nuclear magnetic resonance spectroscopy showed that branched nickel carbide particles are the first catalyst determined to have nearly 100 % electrochemical conversion of methanol to formate without generating detectable CO2 as a byproduct. Electrochemical kinetics analysis revealed the optimized reaction conditions and the electrode delivered excellent activities. This work provides a straightforward and cost‐efficient way for the conversion of organic small molecules and the first direct evidence of a selective formate reaction pathway., J. Li obtained an International Postdoctoral Exchange Fellowship Program (Talent‐Introduction program) in 2019 and is grateful for the project (2019M663468) funded by the China Postdoctoral Science Foundation. This work was supported from the UESTC start‐up funding and the Recruitment Program of Thousand Youth Talents. Y. Yang acknowledges the funding No.21603177 from NSFC. It was also supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016‐77798‐C4‐3‐R) and VALPEC (ENE2017‐85087‐C3). X. Wang, Y. Zuo, and X. Han thank the China Scholarship Council (CSC) for scholarship support. X. Han and J. Arbiol acknowledge funding from Generalitat de Catalunya 2017 SGR 327. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV‐2013‐0295). IREC and ICN2 are funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. J. Llorca is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018‐093996‐B‐C31, GC 2017 SGR 128 and to ICREA Academia program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

SnS2/g-C3N4/graphite nanocomposites as durable lithium-ion battery anode with high pseudocapacitance contribution

  • Zuo, Yong
  • Xu, Xijun
  • Zhang, Chaoqi
  • Li, Junshan
  • Du, Ruifeng
  • Wang, Xiang
  • Han, Xu
  • Arbiol, Jordi
  • Llorca, Jordi
  • Liu, Jun
  • Cabot, Andreu
Tin disulfide is a promising anode material for Li-ion batteries (LIB) owing to its high theoretical capacity and the abundance of its composing elements. However, bare SnS2 suffers from low electrical conductivity and large volume expansion, which results in poor rate performance and cycling stability. Herein, we present a solution-based strategy to grow SnS2 nanostructures within a matrix of porous g-C3N4 (CN) and high electrical conductivity graphite plates (GPs). We test the resulting nanocomposite as anode in LIBs. First, SnS2 nanostructures with different geometries are tested, to find out that thin SnS2 nanoplates (SnS2-NPLs) provide the highest performances. Such SnS2-NPLs, incorporated into hierarchical SnS2/CN/GP nanocomposites, display excellent rate capabilities (536.5 mA h g−1 at 2.0 A g−1) and an outstanding stability (∼99.7% retention after 400 cycles), which are partially associated with a high pseudocapacitance contribution (88.8% at 1.0 mV s−1). The excellent electrochemical properties of these nanocomposites are ascribed to the synergy created between the three nanocomposite components: i) thin SnS2-NPLs provide a large surface for rapid Li-ion intercalation and a proper geometry to stand volume expansions during lithiation/delithiation cycles; ii) porous CN prevents SnS2-NPLs aggregation, habilitates efficient channels for Li-ion diffusion and buffer stresses associated to SnS2 volume changes; and iii) conductive GPs allow an efficient charge transport., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R). Y.Z. thanks China Scholarship Council for scholarship support (201606500001). This work was accomplished with the financial supported from the National Natural Science Foundation of China (no. 51771076) and (no. 51621001. the Foundation for Innovative Research Groups). Jun Liu acknowledges the support from Chinese Government the young “1000 plan”, and thanks the projects of Guangzhou Science and Technology Plan (no. 201804010104) and Guangdong Province Public Interest Research and Capacity Building (no. 2017A010104004). Jordi Llorca is a Serra Húnter Fellow and is grateful to ICREA Academia program and GC 2017 SGR 128. X.H. thanks China Scholarship Council for scholarship support (201804910551). ICN2 acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3-3-R. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme /Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tin selenide molecular precursor for the solution processing of thermoelectric materials and devices

  • Zhang, Yu
  • Xing, Congcong
  • Zhang, Ting
  • Li, Mengyao
  • Pacios, Merce
  • Yu, Xiaoting
  • Arbiol, Jordi
  • Llorca, Jordi
  • Cadavid, Doris
  • Ibáñez, María
  • Cabot, Andreu
In the present work, we report a solution-based strategy to produce crystallographically textured SnSe bulk nanomaterials and printed layers with optimized thermoelectric performance in the direction normal to the substrate. Our strategy is based on the formulation of a molecular precursor that can be continuously decomposed to produce a SnSe powder or printed into predefined patterns. The precursor formulation and decomposition conditions are optimized to produce pure phase 2D SnSe nanoplates. The printed layer and the bulk material obtained after hot press displays a clear preferential orientation of the crystallographic domains, resulting in an ultralow thermal conductivity of 0.55 W m–1 K–1 in the direction normal to the substrate. Such textured nanomaterials present highly anisotropic properties with the best thermoelectric performance in plane, i.e., in the directions parallel to the substrate, which coincide with the crystallographic bc plane of SnSe. This is an unfortunate characteristic because thermoelectric devices are designed to create/harvest temperature gradients in the direction normal to the substrate. We further demonstrate that this limitation can be overcome with the introduction of small amounts of tellurium in the precursor. The presence of tellurium allows one to reduce the band gap and increase both the charge carrier concentration and the mobility, especially the cross plane, with a minimal decrease of the Seebeck coefficient. These effects translate into record out of plane ZT values at 800 K., M.I. acknowledges financial support from IST Austria. Y.L. acknowledges funding from the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie grant agreement no. 754411. J.L. is a Serra Húnter Fellow and is grateful to ICREA Academia program and projects MICINN/FEDER RTI2018-093996-B-C31 and GC 2017 SGR 128. This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R). Y.Z., C.X., M.L., X.Y., and T.Z. thank the China Scholarship Council for scholarship support. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Semiconductivity Transition in Silicon Nanowires by Hole Transport Layer

  • Shalabny, Awad
  • Buonocore, Francesco
  • Celino, Massimo
  • Shalev, Gil
  • Zhang, Lu
  • Wu, Weiwei
  • Li, Peixian
  • Arbiol, Jordi
  • Bashouti, Muhammad Y.
The surface of nanowires is a source of interest mainly for electrical prospects. Thus, different surface chemical treatments were carried out to develop recipes to control the surface effect. In this work, we succeed in shifting and tuning the semiconductivity of a Si nanowire-based device from n- to p-type. This was accomplished by generating a hole transport layer at the surface by using an electrochemical reaction-based nonequilibrium position to enhance the impact of the surface charge transfer. This was completed by applying different annealing pulses at low temperature (below 400 °C) to reserve the hydrogen bonds at the surface. After each annealing pulse, the surface was characterized by XPS, Kelvin probe measurements, and conductivity measured by FET based on a single Si NW. The mechanism and conclusion were supported experimentally and theoretically. To this end, this strategy has been demonstrated as an essential tool which could pave a new road for regulating semiconductivity and for other low-dimensional nanomaterials., M.B. is thankful for the MAOF Grant from the Council for Higher Education in Israel for new faculty members. A.S. is appreciative of the institutional scholarships for Ph.D. students that they received from Ben-Gurion University of the Negev. W.W. is thankful for the fundamental research funds from the Central Universities (JC2002). L.Z. is thankful for the support of a postdoctoral fellowship from the Jacob Blaustein Center for Scientific Cooperation, the National Natural Science Foundation of China (61904134), and the National Natural Science Foundation of Shaanxi Province (2019JQ-291). The computing resources and the related technical support used for this work have been provided by CRESCO/ENEAGRID High Performance Computing infrastructure and its staff, along with additional support from S. Migliori and S. Giusepponi. E.N.E.A. acknowledges funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 824158 (EoCoE-II). J.A. acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO coordinated project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A SnS2 molecular precursor for conformal nanostructured coatings

  • Zuo, Yong
  • Li, Junshan
  • Yu, Xiaoting
  • Du, Ruifeng
  • Zhang, Ting
  • Wang, Xiang
  • Arbiol, Jordi
  • Llorca, Jordi
  • Cabot, Andreu
We present a simple, versatile, and scalable procedure to produce SnS2 nanostructured layers based on an amine/thiol-based molecular ink. The ratios amine/thiol and Sn/S, and the reaction conditions, are systematically investigated to produce phase-pure SnS2 planar and conformal layers with a tremella-like SnS2 morphology. Such nanostructured layers are characterized by excellent photocurrent densities. The same strategy can be used to produce SnS2–graphene composites by simply introducing graphene oxide (GO) into the initial solution. Conveniently, the solvent mixture is able to simultaneously dissolve the Sn and Se powders and reduce the GO. Furthermore, SnS2-xSex ternary coatings and phase-pure SnSe2 can be easily produced by simply incorporating proper amounts of Se into the initial ink formulation. Finally, the potential of this precursor ink to produce gram-scale amounts of unsupported SnS2 is investigated., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the projects SEHTOP, ENE2016-77798-C4-3-R, and ENE2017-85087-C3. Y.Z. thanks the China Scholarship Council for the scholarship support (no. 201606500001). The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. J. Llorca is a Serra Húnter Fellow and is grateful to ICREA Academia program and to MINECO/FEDER grant RTI2018-093996-B-C31 and GC 2017 SGR 128. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. T.Z. has received funding from the CSC-UAB PhD scholarship program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cobalt hexacyanoferrate as a selective and high current density formate oxidation electrocatalyst

  • Han, Li-Juan
  • González-Cobos, Jesús
  • Sánchez-Molina, Irene
  • Giancola, Stefano
  • Folkman, Scott J.
  • Tang, Peng-Yi
  • Heggen, Marc
  • Dunin-Borkowski, Rafal E.
  • Arbiol, Jordi
  • Giménez, Sixto
  • Galán-Mascarós, José Ramón
Herein we report the selectivity, stability, and electrochemical characterization of cobalt hexacyanoferrate, the Co–Fe Prussian Blue derivative (CoFePB), as a formate/formic acid oxidation electrocatalyst in aqueous media. CoFePB is able to quantitatively catalyze (100% Faradaic efficiency within less than 8% standard error at pH 5) the electrochemical oxidation of formate to CO2 over a pH range of 1–13. This quantitative formate elecrooxidation is possible due to the exclusive selectivity of the catalyst in a wide potential window (from ca. 1.2 to 1.7 V vs RHE), where no other substrate in aqueous conditions is activated: neither other organic molecules, such as alcohols or acids, nor water itself. CoFePB is one of the first heterogeneous noble-metal-free catalysts reported for the electrooxidation of small hydrocarbon molecules. Importantly, the catalyst showed a very high tolerance against surface poisoning during the reaction, as supported by the cyclic voltammetry and electrochemical impedance spectroscopy data, thereby allowing CoFePB to operate at greater current density than state-of-the-art noble metal catalysts. For example, we observed that CoFePB is able to achieve a formate oxidation current ∼10 mA cm–2 at pH 5, 0.4 M formate at 1.4 V vs RHE, whereas a Pt disk and Pd(5%)/C electrodes had currents of 0.4 and 1.4 mA cm–2, respectively, under identical conditions. The remarkable selectivity, stability, and high current density of CoFePB, in contrast to state-of-the-art catalysts based on platinum-group metals, is an important step in the search for inexpensive earth-abundant materials for oxidation of organic molecules for use in liquid fuel cells or for selective organic molecule sensors. Furthermore, because CoFePB is not poisoned by intermediates and can achieve higher current density than Pt or Pd, improvement of the catalyst onset potential can lead to higher power density formate oxidation fuel cells using earth-abundant metals than with Pt or Pd., We gratefully acknowledge financial support from the FEDER/Ministerio de Ciencia e Innovación–Agencia Estatal de Investigación through Projects RTI2018-095618-B-I00 and ENE2017-85087-C3; the Generalitat de Catalunya (Grant Nos. 2017-SGR-1406 and 2017-SGR-327), and the CERCA Programme/Generalitat de Catalunya. I.S.-M. thanks the Marie Skłodowska-Curie CO-FUND program PRO-BIST for her postdoctoral contract (Grant Agreement No. 754510). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). ICN2 and ICIQ acknowledge funding from the BIST Ignite Project InWOC2., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

ZnSe/N-doped carbon nanoreactor with multiple adsorption sites for stable lithium–sulfur batteries

  • Yang, Dawei
  • Zhang, Chaoqi
  • Jacas Biendicho, Jordi
  • Han, Hu
  • Liang, Zhifu
  • Du, Ruifeng
  • Li, Mengyao
  • Li, Junshan
  • Arbiol, Jordi
  • Llorca, Jordi
  • Zhou, Yingtang
  • Morante, Joan Ramón
  • Cabot, Andreu
To commercially realize the enormous potential of lithium–sulfur batteries (LSBs) several challenges remain to be overcome. At the cathode, the lithium polysulfide (LiPS) shuttle effect must be inhibited and the redox reaction kinetics need to be substantially promoted. In this direction, this work proposes a cathode material based on a transition-metal selenide (TMSe) as both adsorber and catalyst and a hollow nanoreactor architecture: ZnSe/N-doped hollow carbon (ZnSe/NHC). It is here demonstrated both experimentally and by means of density functional theory that this composite provides three key benefits to the LSBs cathode: (i) A highly effective trapping of LiPS due to the combination of sulfiphilic sites of ZnSe, lithiophilic sites of NHC, and the confinement effect of the cage-based structure; (ii) a redox kinetic improvement in part associated with the multiple adsorption sites that facilitate the Li+ diffusion; and (iii) an easier accommodation of the volume expansion preventing the cathode damage due to the hollow design. As a result, LSB cathodes based on S@ZnSe/NHC are characterized by high initial capacities, superior rate capability, and an excellent stability. Overall, this work not only demonstrates the large potential of TMSe as cathode materials in LSBs but also probes the nanoreactor design to be a highly suitable architecture to enhance cycle stability., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economíay Competitividad through the project SEHTOP, ENE2016-77798-C4-3-R, and ENE2017-85087-C3. D. Yang, C. Zhang, and X. Han thank the China Scholarship Council for the scholarship support. Z. Liang acknowledges funding from a MINECO SO FPI PhD grant (SEV-2013-0295-17-1). J. Li obtained an International Postdoctoral Exchange Fellowship (Talent-Introduction program) in 2019 and is grateful for the project (2019M663468) funded by the China Postdoctoral Science Foundation. The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 acknowledges the support from the Severo Ochoa Programme (MINECO, grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. J. Llorca is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128, and to the ICREA Academia program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomically dispersed Fe in a C2N based catalyst as a sulfur host for efficient lithium–sulfur batteries

  • Liang, Zhifu
  • Yang, Dawei
  • Tang, Peng-Yi
  • Zhang, Chaoqi
  • Jacas Biendicho, Jordi
  • Zhang, Yi
  • Llorca, Jordi
  • Wang, Xiang
  • Li, Junshan
  • Heggen, Marc
  • David, Jeremy
  • Dunin-Borkowski, Rafal E.
  • Zhou, Yingtang
  • Morante, Joan Ramón
  • Cabot, Andreu
  • Arbiol, Jordi
Lithium–sulfur batteries (LSBs) are considered to be one of the most promising next generation energy storage systems due to their high energy density and low material cost. However, there are still some challenges for the commercialization of LSBs, such as the sluggish redox reaction kinetics and the shuttle effect of lithium polysulfides (LiPS). Here a 2D layered organic material, C2N, loaded with atomically dispersed iron as an effective sulfur host in LSBs is reported. X‐ray absorption fine spectroscopy and density functional theory calculations prove the structure of the atomically dispersed Fe/C2N catalyst. As a result, Fe/C2N‐based cathodes demonstrate significantly improved rate performance and long‐term cycling stability. Fe/C2N‐based cathodes display initial capacities up to 1540 mAh g−1 at 0.1 C and 678.7 mAh g−1 at 5 C, while retaining 496.5 mAh g−1 after 2600 cycles at 3 C with a decay rate as low as 0.013% per cycle. Even at a high sulfur loading of 3 mg cm−2, they deliver remarkable specific capacity retention of 587 mAh g−1 after 500 cycles at 1 C. This work provides a rational structural design strategy for the development of high‐performance cathodes based on atomically dispersed catalysts for LSBs., ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV‐2017‐0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. J.D. has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowka‐Curie grant agreement No 665919 (P‐SPHERE) co‐funded by Severo Ochoa Programme. Z.L. acknowledges funding from MINECO SO‐FPT PhD grant (SEV‐2013‐0295‐17‐1). This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 823717‐ESTEEM3. The present work is supported by the European Regional Development Funds and by the Spanish MINECO through the projects SEHTOP, ENE2016‐77798‐C4‐3‐R, and ENE2017‐85087‐C3. D.Y., X.W., and C.Z. thank the China Scholarship Council for the scholarship support. P.T. acknowledges Humboldt Research Fellowship for Postdoctoral Researchers sponsored by the Alexander von Humboldt Foundation. J.L. obtained International Postdoctoral Exchange Fellowship Program (Talent‐Introduction program) in 2019 and is grateful for the project (2019M663468) funded by the China Postdoctoral Science Foundation. Authors acknowledge funding from Generalitat de Catalunya 2017SGR327 and 2017SGR1246. J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018‐093996‐B‐C31, GC 2017 SGR 128 and to ICREA Academia program. The authors thank Jessica Padilla, Dr. Albert Llorente Mola, and Dr. Tariq Jawhari support in ICN2, IREC and UB, respectively for the help in additional analyses performed in the samples., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A direct z-scheme for the photocatalytic hydrogen production from a water ethanol mixture on CoTiO3/TiO2 heterostructures

  • Xing, Congcong
  • Liu, Yongpeng
  • Zhang, Yu
  • Wang, Xiang
  • Guardia, Pablo
  • Yao, Liang
  • Han, Xu
  • Zhang, Ting
  • Arbiol, Jordi
  • Soler, Lluís
  • Chen, Yufen
  • Sivula, Kevin
  • Guijarro, Néstor
  • Cabot, Andreu
  • Llorca, Jordi
Photocatalytic H2 evolution from ethanol dehydrogenation is a convenient strategy to store solar energy in a highly valuable fuel with potential zero net CO2 balance. Herein, we report on the synthesis of CoTiO3/TiO2 composite catalysts with controlled amounts of highly distributed CoTiO3 nanodomains for photocatalytic ethanol dehydrogenation. We demonstrate these materials to provide outstanding hydrogen evolution rates under UV and visible illumination. The origin of this enhanced activity is extensively analyzed. In contrast to previous assumptions, UV–vis absorption spectra and ultraviolet photoelectron spectroscopy (UPS) prove CoTiO3/TiO2 heterostructures to have a type II band alignment, with the conduction band minimum of CoTiO3 below the H2/H+ energy level. Additional steady-state photoluminescence (PL) spectra, time-resolved PL spectra (TRPLS), and electrochemical characterization prove such heterostructures to result in enlarged lifetimes of the photogenerated charge carriers. These experimental evidence point toward a direct Z-scheme as the mechanism enabling the high photocatalytic activity of CoTiO3/TiO2 composites toward ethanol dehydrogenation. In addition, we probe small changes of temperature to strongly modify the photocatalytic activity of the materials tested, which could be used to further promote performance in a solar thermophotocatalytic reactor., This work was supported by projects MICINN/FEDER RTI2018-093996-B-C31 and RTI2018-095498-J-I00. J.A., T.Z., and X.H. thank funding from GC 2017 SGR 327 and the MINECO project (ENE2017-85087-C3). ICN2 thanks the support from the Severo Ochoa program (MINECO, no. SEV-2013-0295) and the CERCA program/Generalitat de Catalunya. N.G. and Y.L. thank the Swiss National Science Foundation (SNF) for funding under the Ambizione Energy (no. PZENP2_166871). Y.Z., C.X., X.W., and T.Z. acknowledge the China Scholarship Council (CSC) for scholarship support. Part of the present work has been performed in the framework of the Universitat Autónoma de Barcelona Materials Science PhD program. J.L. is a Serra Hunter fellow and is grateful to GC 2017 SGR 128 and the ICREA Academia program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nickel iron diselenide for highly efficient and selective electrocatalytic conversion of methanol to formate

  • Li, Junshan
  • Xing, Congcong
  • Zhang, Yu
  • Spadaro, Maria Chiara
  • Wu, Qianbao
  • Yi, Yunan
  • He, Shenglan
  • Llorca, Jordi
  • Arbiol, Jordi
  • Cabot, Andreu
  • Cui, Chunhua
The electro-oxidation of methanol to formate is an interesting example of the potential use of renewable energies to add value to a biosourced chemical commodity. Additionally, methanol electro-oxidation can replace the sluggish oxygen evolution reaction when coupled to hydrogen evolution or to the electroreduction of other biomass-derived intermediates. But the cost-effective realization of these reaction schemes requires the development of efficient and low-cost electrocatalysts. Here, a noble metal-free catalyst, Ni1−xFexSe2 nanorods, with a high potential for an efficient and selective methanol conversion to formate is demonstrated. At its optimum composition, Ni0.75Fe0.25Se2, this diselenide is able to produce 0.47 mmol cm−2 h−1 of formate at 50 mA cm−2 with a Faradaic conversion efficiency of 99%. Additionally, this noble-metal-free catalyst is able to continuously work for over 50 000 s with a minimal loss of efficiency, delivering initial current densities above 50 mA cm−2 and 2.2 A mg−1 in a 1.0 m KOH electrolyte with 1.0 m methanol at 1.5 V versus reversible hydrogen electrode. This work demonstrates the highly efficient and selective methanol-to-formate conversion on Ni-based noble-metal-free catalysts, and more importantly it shows a very promising example to exploit the electrocatalytic conversion of biomass-derived chemicals., J.L. obtained International Postdoctoral Exchange Fellowship Program (Talent-Introduction program No. YJ20190126) in 2019 and is grateful for the project (2019M663468) funded by the China Postdoctoral Science Foundation. This work was supported from the UESTC start-up funding, the Recruitment Program of Thousand Youth Talents, and the Natural Science Foundation of China (22072013). It was also supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R) and VALPEC (ENE2017-85087-C3). C.X., Y.Z., and T.Z. are grateful for the China Scholarship Council (CSC) for scholarship support. T.Z., and J.A. acknowledge funding from Generalitat de Catalunya 2017 SGR 327. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV-2013-0295). T.Z. has received funding from the CSC-UAB PhD scholarship program. M.C.S. has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 754510 (PROBIST) and the Severo Ochoa programme. IREC and ICN2 are funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128 and to ICREA Academia program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Doping-mediated stabilization of copper vacancies to promote thermoelectric properties of Cu2−xS

  • Zhang, Yu
  • Xing, Congcong
  • Liu, Yu
  • Spadaro, Maria Chiara
  • Wang, Xiang
  • Li, Mengyao
  • Xiao, Ke
  • Zhang, Ting
  • Guardia, Pablo
  • Lim, Khak Ho
  • Ostovari Moghaddam, Ahmad
  • Llorca, Javier
  • Arbiol, Jordi
  • Ibáñez, María
  • Cabot, Andreu
Copper chalcogenides are outstanding thermoelectric materials for applications in the medium-high temperature range. Among different chalcogenides, while CuSe is characterized by higher thermoelectric figures of merit, CuS provides advantages in terms of low cost and element abundance. In the present work, we investigate the effect of different dopants to enhance the CuS performance and also its thermal stability. Among the tested options, Pb-doped CuS shows the highest improvement in stability against sulfur volatilization. Additionally, Pb incorporation allows tuning charge carrier concentration, which enables a significant improvement of the power factor. We demonstrate here that the introduction of an optimal additive amount of just 0.3% results in a threefold increase of the power factor in the middle-temperature range (500–800 K) and a record dimensionless thermoelectric figure of merit above 2 at 880 K., This work was supported by the European Regional Development Fund and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R). MI acknowledges financial support from IST Austria. YL acknowledges funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 754411. YZ, CX, XW, KX and TZ thank the China Scholarship Council for the scholarship support. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA program/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. M.C.S. has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 754510 (PROBIST) and the Severo Ochoa programme. P.G. acknowledges financial support from the Spanish government (MICIU) through the RTI2018-102006-J-I00 project and the Catalan Agency of Competitiveness (ACCIO) through the TecnioSpring+ Marie Sklodowska-Curie action TECSPR16-1-0082. YZ and CX contributed equally to this work.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of the Annealing Atmosphere on Crystal Phase and Thermoelectric Properties of Copper Sulfide

  • Li, Mengyao
  • Liu, Yu
  • Zhang, Yu
  • Han, Xu
  • Zhang, Ting
  • Zuo, Yong
  • Xie, Chenyang
  • Xiao, Ke
  • Arbiol, Jordi
  • Llorca, Jordi
  • Ibáñez, María
  • Liu, Junfeng
  • Cabot, Andreu
Cu2-xS has become one of the most promising thermoelectric materials for application in the middle-high temperature range. Its advantages include the abundance, low cost, and safety of its elements and a high performance at relatively elevated temperatures. However, stability issues limit its operation current and temperature, thus calling for the optimization of the material performance in the middle temperature range. Here, we present a synthetic protocol for large scale production of covellite CuS nanoparticles at ambient temperature and atmosphere, and using water as a solvent. The crystal phase and stoichiometry of the particles are afterward tuned through an annealing process at a moderate temperature under inert or reducing atmosphere. While annealing under argon results in Cu1.8S nanopowder with a rhombohedral crystal phase, annealing in an atmosphere containing hydrogen leads to tetragonal Cu1.96S. High temperature X-ray diffraction analysis shows the material annealed in argon to transform to the cubic phase at ca. 400 K, while the material annealed in the presence of hydrogen undergoes two phase transitions, first to hexagonal and then to the cubic structure. The annealing atmosphere, temperature, and time allow adjustment of the density of copper vacancies and thus tuning of the charge carrier concentration and material transport properties. In this direction, the material annealed under Ar is characterized by higher electrical conductivities but lower Seebeck coefficients than the material annealed in the presence of hydrogen. By optimizing the charge carrier concentration through the annealing time, Cu2-xS with record figures of merit in the middle temperature range, up to 1.41 at 710 K, is obtained. We finally demonstrate that this strategy, based on a low-cost and scalable solution synthesis process, is also suitable for the production of high performance Cu2-xS layers using high throughput and cost-effective printing technologies., This work was supported by the European Regional Development Funds. M.Y.L., X.H., T.Z., and K.X. thank the China Scholarship Council for scholarship support. M.I. acknowledges financial support from IST Austria. J.L. acknowledges support from the National Natural Science Foundation of China (No. 22008091), the funding for scientific research startup of Jiangsu University (No. 19JDG044), and Jiangsu Provincial Program for High-Level Innovative and Entrepreneurial Talents Introduction. J.L. is a Serra Húnter fellow and is grateful to the ICREA Academia program and projects MICINN/FEDER RTI2018-093996-B-C31 and GC 2017 SGR 128. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. T.Z. has received funding from the CSC-UAB PhD scholarship program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effects of solar irradiation on thermally driven CO2 methanation using Ni/CeO2–based catalyst

  • Golovanova, Viktoria
  • Spadaro, Maria Chiara
  • Arbiol, Jordi
  • Golovanova, Liubov V.
  • Rantala, Tapio T.
  • Andreu, Teresa
  • Morante, Joan Ramón
Utilization of the renewable energy sources is one of the main challenges in the state-of-the-art technologies for CO recycling. Here we have taken advantage of the solar light harvesting in the thermocatalytic approach to carbon dioxide methanation. The large-surface-area Ni/CeO catalyst produced by a scalable low-cost method was characterized and tested in the dark and under solar light irradiation conditions. Light-assisted CO conversion experiments as well as in-situ DRIFT spectrometry, performed at different illumination intensities, have revealed a dual effect of the incident photons on the catalytic properties of the two-component Ni/CeO catalyst. On the one hand, absorbed photons induce a localized surface plasmon resonance in the Ni nanoparticles followed by dissipation of the heat to the oxide matrix. On the other hand, the illumination activates the photocatalytic properties of the CeO support, which leads to an increase in the concentration of the intermediates being precursor for methane production. Analysis of the methane production at different temperatures and illumination conditions has shown that the methanation reaction in our case is controlled by a photothermally-activated process. The used approach has allowed us to increase the reaction rate up to 2.4 times and consequently to decrease the power consumption by 20 % under solar illumination, thus replacing the conventional thermal activation of the reaction with a green energy source., This work has been done in the framework of the doctorate programme in Materials Science of the Autonomous University of Barcelona. V. Golovanova has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 754397. Authors acknowledge Generalitat de Catalunya for financial support through the CERCA Programme, M2E (2017 SGR 1246) and the CSC – IT Center for Science, Espoo, Finland for provided resources. IREC also acknowledges additional support by the European Regional Development Funds (ERDF, FEDER) and by MINECO coordinated projects MAT2014-59961-C2, ENE2016-80788-C5-5-R and ENE2017-85087-C3. M. C. Spadaro and J. Arbiol acknowledge funding from Generalitat de Catalunya 2017 SGR 327. ICN2 is supported by the Severo Ochoa programme from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme / Generalitat de Catalunya. M. C. Spadaro has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 754510 (PROBIST) and the Severo Ochoa programme.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced thermoelectric performance of n-type bi2se3 nanosheets through sn doping

  • Li, Mengyao
  • Zhang, Yu
  • Zhang, Ting
  • Zuo, Yong
  • Xiao, Ke
  • Arbiol, Jordi
  • Llorca, Jordi
  • Liu, Yu
  • Cabot, Andreu
The cost-effective conversion of low-grade heat into electricity using thermoelectric devices requires developing alternative materials and material processing technologies able to reduce the currently high device manufacturing costs. In this direction, thermoelectric materials that do not rely on rare or toxic elements such as tellurium or lead need to be produced using high-throughput technologies not involving high temperatures and long processes. BiSe is an obvious possible Tefree alternative to BiTe for ambient temperature thermoelectric applications, but its performance is still low for practical applications, and additional efforts toward finding proper dopants are required. Here, we report a scalable method to produce BiSe nanosheets at low synthesis temperatures. We studied the influence of different dopants on the thermoelectric properties of this material. Among the elements tested, we demonstrated that Sn doping resulted in the best performance. Sn incorporation resulted in a significant improvement to the BiSe Seebeck coefficient and a reduction in the thermal conductivity in the direction of the hot-press axis, resulting in an overall 60% improvement in the thermoelectric figure of merit of BiSe ., M.L., Y.Z., T.Z. and K.X. thank the China Scholarship Council for their scholarship support. Y.L. acknowledges funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 754411. J.L. thanks the ICREA Academia program and projects MICINN/FEDER RTI2018-093996-B-C31 and G.C. 2017 SGR 128. ICN2 acknowledges funding from the Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO ENE2017-85087-C3.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Facing Seawater Splitting Challenges by Regeneration with Ni−Mo−Fe Bifunctional Electrocatalyst for Hydrogen and Oxygen Evolution

  • Ros, Carles
  • Murcia-López, Sebastián
  • Garcia, Xènia
  • Rosado, Marcos
  • Arbiol, Jordi
  • Llorca, Jordi
  • Morante, Javier
Hydrogen, produced by water splitting, has been proposed as one of the main green energy vectors of the future if produced from renewable energy sources. However, to substitute fossil fuels, large amounts of pure water are necessary, scarce in many world regions. In this work, we fabricate efficient and earth-abundant electrodes, study the challenges of using real seawater, and propose an electrode regeneration method to face undesired salt deposition. Ni−Mo−Fe trimetallic electrocatalyst is deposited on non-expensive graphitic carbon felts both for hydrogen (HER) and oxygen evolution reactions (OER) in seawater and alkaline seawater. Cl pitting and the chlorine oxidation reaction are suppressed on these substrates and alkalinized electrolyte. Precipitations on the electrodes, mainly CaCO, originating from seawater-dissolved components have been studied, and a simple regeneration technique is proposed to rapidly dissolve undesired deposited CaCO in acidified seawater. Under alkaline conditions, Ni−Mo−Fe-based catalyst is found to reconfigure, under cathodic bias, into Ni−Mo−Fe alloy with a cubic crystalline structure and Ni : Fe(OH) redeposits whereas, under anodic bias, it is transformed into a follicular Ni:FeOOH structure. High productivities over 300 mA cm and voltages down to 1.59 V@10 mA cm for the overall water splitting reaction have been shown, and electrodes are found stable for over 24 h without decay in alkaline seawater conditions and with energy efficiency higher than 61.5 % which makes seawater splitting promising and economically feasible., Authors from IREC acknowledge Generalitat de Catalunya for financial support through the CERCA Programme. J.R.M. acknowledges Generalitat de Catalunya for financial support through the CERCA Programme, M2E (2017 SGR 1246). IREC and ICN2 also acknowledge additional support by the European Regional Development Funds (ERDF, FEDER) and by MINECO coordinated project ENE2017-85087-C3. ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. ICN2 acknowledges funding from Generalitat de Catalunya SEV-2017-0706). J.L. and X.G. are grateful to projects MICINN/FEDER RTI2018-093996-B−C31 and Generalitat de Catalunya 2017 SGR 128. X.G. is grateful to Generalitat de Catalunya for PhD grant 2017 FI_B 00137. JL is a Serra Húnter fellow and is grateful to ICREA Academia program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In situ nanoremediation of soils and groundwaters from the nanoparticle's standpoint: A review

  • Marcon, Lionel
  • Oliveras, Jana
  • Puntes, Víctor F.
Anthropogenic pollution coming from industrial processes, agricultural practices and consumer products, results in the release of toxic substances into rural and urban environments. Once released, these chemicals migrate through the atmosphere and water, and find their way into matrices such as sediments and groundwaters, thus making large areas potentially uninhabitable. Common pollutants, including heavy metal(loid)s, radionuclides, aliphatic hydrocarbons and halogenated organics, are known to adversely affect physiological systems in animal species. Pollution can be cleaned up using techniques such as coagulation, reverse osmosis, oxidation and biological methods, among others. The use of nanoparticles (NPs) extends the range of available technologies and offers particular benefits, not only by degrading, transforming and immobilizing contaminants, but also by reaching inaccessible areas and promoting biotic degradation. The development of NPs is understandably heralded as an environmentally beneficial technology; however, it is only now that the ecological risks associated with their use are being evaluated. This review presents recent developments in the use of engineered NPs for the in situ remediation of two paramount environmental matrices: soils and groundwaters. Emphasis will be placed on (i) the successful applications of nano-objects for environmental cleanup, (ii) the potential safety implications caused by the challenging requirements of [high reactivity toward pollutants] vs. [none reactivity toward biota], with a thorough view on their transport and evolution in the matrix, and (iii) the perspectives on scientific and regulatory challenges. To this end, the most promising nanomaterials will be considered, including nanoscale zerovalent iron, nano-oxides and carbonaceous materials. The purpose of the present review is to give an overview of the development of nanoremediators since they appeared in the 2000s, from their chemical modifications, mechanism of action and environmental behavior to an understanding of the problematics (technical limitations, economic constraints and institutional precautionary approaches) that will drive their future full-scale applications., This work was supported by the Spanish MINECO (MAT2015-70725-R, ENE2017-85087-C3, CTQ2016-75016-R, AEI/FEDER, UE) and from the Generalitat de Catalunya (2017-SGR-1431, 2017-SGR-327). The authors also acknowledge the HISENTS (685817) Project financed by the European Community under H20202 Capacities Programme. V.F.P. acknowledges financial support by the Spanish MINECO through the Ramon y Cajal program (RYC-2012-10991). The Institut Català de Nanociència i Nanotecnologia (ICN2) is jointly supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706) and the CERCA Programme/Generalitat de Catalunya. J.O. acknowledges support from the European Social Fund, the Secretaria d'Universitats i Recerca, Departament d'Empresa i Coneixement of the Generalitat de Catalunya (2020 FI_B1 00141) and the Universitat Autònoma de Barcelona (UAB).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of copper telluride nanodomains on the transport properties of n-type bismuth telluride

  • Zhang, Yu
  • Xing, Congcong
  • Liu, Yu
  • Li, Mengyao
  • Xiao, Ke
  • Guardia, Pablo
  • Lee, Seung-Ho
  • Han, Xu
  • Ostovari Moghaddam, Ahmad
  • Roa, J. J.
  • Arbiol, Jordi
  • Ibáñez, María
  • Pan, Kai
  • Prato, Mirko
  • Xie, Ying
  • Cabot, Andreu
The high processing cost, poor mechanical properties and moderate performance of BiTe–based alloys used in thermoelectric devices limit the cost-effectiveness of this energy conversion technology. Towards solving these current challenges, in the present work, we detail a low temperature solution-based approach to produce BiTe-CuTe nanocomposites with improved thermoelectric performance. Our approach consists in combining proper ratios of colloidal nanoparticles and to consolidate the resulting mixture into nanocomposites using a hot press. The transport properties of the nanocomposites are characterized and compared with those of pure BiTe nanomaterials obtained following the same procedure. In contrast with most previous works, the presence of CuTe nanodomains does not result in a significant reduction of the lattice thermal conductivity of the reference BiTe nanomaterial, which is already very low. However, the introduction of CuTe yields a nearly threefold increase of the power factor associated to a simultaneous increase of the Seebeck coefficient and electrical conductivity at temperatures above 400 K. Taking into account the band alignment of the two materials, we rationalize this increase by considering that CuTe nanostructures, with a relatively low electron affinity, are able to inject electrons into BiTe, enhancing in this way its electrical conductivity. The simultaneous increase of the Seebeck coefficient is related to the energy filtering of charge carriers at energy barriers within BiTe domains associated with the accumulation of electrons in regions nearby a CuTe/BiTe heterojunction. Overall, with the incorporation of a proper amount of CuTe nanoparticles, we demonstrate a 250% improvement of the thermoelectric figure of merit of BiTe, This work was supported by the European Regional Development Funds and by the Generalitat de Catalunya through the project 2017SGR1246. Y.Z, C.X, M.L, K.X and X.H thank the China Scholarship Council for the scholarship support. MI acknowledges financial support from IST Austria. YL acknowledges funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 754411. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA Program/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal Oxide Clusters on Nitrogen-Doped Carbon are Highly Selective for CO2Electroreduction to CO

  • Li, Jingkun
  • Zitolo, Andrea
  • Garcés-Pineda, Felipe A.
  • Tristan, Asset
  • Kodali, Mounika
  • Tang, Peng-Yi
  • Arbiol, Jordi
  • Galán-Mascarós, José Ramón
  • Atanassov, Plamen
  • Zenyuk, Iryna V.
  • Sougrati, Moulay Tahar
  • Jaouen, Frédéric
The electrochemical reduction of CO2 (eCO2RR) using renewable energy is an effective approach to pursue carbon neutrality. The eCO2RR to CO is indispensable in promoting C-C coupling through bifunctional catalysis and achieving cascade conversion from CO2 to C2+. This work investigates a series of M/N-C (M = Mn, Fe, Co, Ni, Cu, and Zn) catalysts, for which the metal precursor interacted with the nitrogen-doped carbon support (N-C) at room temperature, resulting in the metal being present as (sub)nanosized metal oxide clusters under ex situ conditions, except for Cu/N-C and Zn/N-C. A volcano trend in their activity toward CO as a function of the group of the transition metal is revealed, with Co/N-C exhibiting the highest activity at -0.5 V versus RHE, while Ni/N-C shows both appreciable activity and selectivity. Operando X-ray absorption spectroscopy shows that the majority of Cu atoms in Cu/N-C form Cu0 clusters during eCO2RR, while Mn/, Fe/, Co/, and Ni/N-C catalysts maintain the metal hydroxide structures, with a minor amount of M0 formed in Fe/, Co/, and Ni/N-C. The superior activity of Fe/, Co/, and Ni/N-C is ascribed to the phase contraction and the HCO3- insertion into the layered structure of metal hydroxides. Our work provides a facile synthetic approach toward highly active and selective electrocatalysts to convert CO2 into CO. Coupled with state-of-the-art NiFe-based anodes in a full-cell device, Ni/N-C exhibits >80% Faradaic efficiency toward CO at 100 mA cm-2., The research leading to these results has received funding from the A-LEAF Project, which is funded by the European Union’s H2020 Programme under grant agreement no. 732840. ICN2 and ICIQ acknowledge funding from the FEDER/Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación (projects ENE2017-85087-C3 and RTI2018-095618-B-I00) and the Generalitat de Catalunya (2017 SGR 327 and 2017- SGR-1406) and by the CERCA Programme / Generalitat de Catalunya. ICN2 and ICIQ are supported by the Severo Ochoa program from Spanish MINECO (grants no. SEV-2017-0706 and CEX2019-000925-S).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

NbSe2 Meets C2N: A 2D-2D Heterostructure Catalysts as Multifunctional Polysulfide Mediator in Ultra-Long-Life Lithium–Sulfur Batteries

  • Yang, Dawei
  • Liang, Zhifu
  • Zhang, Chaoqi
  • Biendicho, Jordi Jacas
  • Botifoll, Marc
  • Spadaro, Maria Chiara
  • Chen, Qiulin
  • Li, Mengyao
  • Ramón, Alberto
  • Ostovari Moghaddam, Ahmad
  • Llorca, Jordi
  • Wang, Jiaao
  • Ramon Morante, Joan
  • Arbiol, Jordi
  • Chou, Shu-Lei
  • Cabot, Andreu
The shuttle effect and sluggish conversion kinetics of lithium polysulfides (LiPS) hamper the practical application of lithium–sulfur batteries (LSBs). Toward overcoming these limitations, herein an in situ grown CN@NbSe heterostructure is presented with remarkable specific surface area, as a Li–S catalyst and LiPS absorber. Density functional theory (DFT) calculations and experimental results comprehensively demonstrate that CN@NbSe is characterized by a suitable electronic structure and charge rearrangement that strongly accelerates the LiPS electrocatalytic conversion. In addition, heterostructured CN@NbSe strongly interacts with LiPS species, confining them at the cathode. As a result, LSBs cathodes based on CN@NbSe/S exhibit a high initial capacity of 1545 mAh g at 0.1 C. Even more excitingly, CN@NbSe/S cathodes are characterized by impressive cycling stability with only 0.012% capacity decay per cycle after 2000 cycles at 3 C. Even at a sulfur loading of 5.6 mg cm, a high areal capacity of 5.65 mAh cm is delivered. These results demonstrate that CN@NbSe heterostructures can act as multifunctional polysulfide mediators to chemically adsorb LiPS, accelerate Li-ion diffusion, chemically catalyze LiPS conversion, and lower the energy barrier for LiS precipitation/decomposition, realizing the “adsorption-diffusion-conversion” of polysulfides., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economíay Competitividad through the project SEHTOP, ENE2016- 77798-C4-3-R, and ENE2017-85087-C3. D.Y., C.Z. and M.L. thank the China Scholarship Council for the scholarship support (CSC 201806090276, CSC 201706650011 and CSC 201706890005, respectively). Z.L. acknowledges funding from MINECO SO FPI Ph.D. grant (SEV-2013-0295-17-1). The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 acknowledges the support from the Severo Ochoa Programme (MINECO, Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128, and to ICREA Academia program. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. M.C.S. has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No 754510 (PROBIST). M.B. acknowledges support from SUR Generalitat de Catalunya and the EU Social Fund; project ref. 2020 FI 00103.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photodehydrogenation of ethanol over cu2o/tio2 heterostructures

  • Xing, Congcong
  • Zhang, Yu
  • Liu, Yongpeng
  • Wang, Xiang
  • Li, Junshan
  • Martínez-Alanis, Paulina R.
  • Spadaro, Maria Chiara
  • Guardia, Pablo
  • Arbiol, Jordi
  • Llorca, Jordi
  • Cabot, Andreu
The photodehydrogenation of ethanol is a sustainable and potentially cost-effective strategy to produce hydrogen and acetaldehyde from renewable resources. The optimization of this process requires the use of highly active, stable and selective photocatalytic materials based on abundant elements and the proper adjustment of the reaction conditions, including temperature. In this work, CuO-TiO type-II heterojunctions with different CuO amounts are obtained by a one-pot hydrothermal method. The structural and chemical properties of the produced materials and their activity toward ethanol photodehydrogenation under UV and visible light illumination are evaluated. The CuO-TiO photocatalysts exhibit a high selectivity toward acetaldehyde production and up to tenfold higher hydrogen evolution rates compared to bare TiO . We further discern here the influence of temperature and visible light absorption on the photocatalytic performance. Our results point toward the combination of energy sources in thermo-photocatalytic reactors as an efficient strategy for solar energy conversion., This work was supported by the MINECO project COMBENERGY (PID2019-105490RB-C32) and MICINN/FEDER project RTI2018-093996-B-C31. J.A. and M.C.S. thank funding from GC 2017 SGR 327 and MINECO project (ENE2017-85087-C3). ICN2 thanks supporting from the Severo Ochoa Program (MINECO, No. SEV-2013-0295) and the CERCA Program/Generalitat de Catalunya. Y.Z., C.X., and X.W. acknowledge the China Scholarship Council (CSC) for scholarship support. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. J.L. is a Serra Hunter fellow and is grateful to GC 2017 SGR 128 and ICREA Academia program. Y.L. thank the Swiss National Science Foundation (SNF) for funding under the Ambizione Energy (No. PZENP2_166871). M.C.S. has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 754510 (PROBIST) and the Severo Ochoa programme.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Push-Pull Electronic Effects in Surface-Active Sites Enhance Electrocatalytic Oxygen Evolution on Transition Metal Oxides

  • Garcés-Pineda, Felipe A.
  • Nguyen, Huu Chuong
  • Blasco-Ahicart, Marta
  • García-Tecedor, Miguel
  • Fez Febré, Mabel de
  • Tang, Peng-Yi
  • Arbiol, Jordi
  • Giménez, Sixto
  • Galán-Mascarós, José Ramón
  • López, Núria
Sustainable electrocatalysis of the oxygen evolution reaction (OER) constitutes a major challenge for the realization of green fuels. Oxides based on Ni and Fe in alkaline media have been proposed to avoid using critical raw materials. However, their ill-defined structures under OER conditions make the identification of key descriptors difficult. Here, we have studied Fe−Ni−Zn spinel oxides, with a well-defined crystal structure, as a platform to obtain general understanding on the key contributions. The OER reaches maximum performance when: (i) Zn is present in the Spinel structure, (ii) very dense, equimolar 1 : 1 : 1 stoichiometry sites appear on the surface as they allow the formation of oxygen vacancies where Zn favors pushing the electronic density that is pulled by the octahedral Fe and tetrahedral Ni redox pair lowering the overpotential. Our work proves cooperative electronic effects on surface active sites as key to design optimum OER electrocatalysts., This work was funded by the European Union under the H2020 FET-PROACT A-LEAF project (Grant Agreement No. 732840). The authors thankfully acknowledge the computer resources at MareNostrum and the technical support provided by the Barcelona Supercomputing Center (QCM-2018-3-0012 Theoretical studies on catalysis optimization for an Artificial Leaf (A-LEAF)). ICN2 acknowledge funding from Generalitat de Catalunya 2017 SGR 327. ICN2 and UJI acknowledge funding from the Spanish MINECO coordinated project VALPEC (ENE2017-85087-C3). ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme / Generalitat de Catalunya.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tubular CoFeP@CN as a Mott–Schottky Catalyst with Multiple Adsorption Sites for Robust Lithium−Sulfur Batteries

  • Zhang, Chaoqi
  • Du, Ruifeng
  • Biendicho, Jordi Jacas
  • Yi, Mingjie
  • Xiao, Ke
  • Yang, Dawei
  • Zhang, Ting
  • Wang, Xiang
  • Arbiol, Jordi
  • Llorca, Jordi
  • Zhou, Yingtang
  • Morante, Joan Ramón
  • Cabot, Andreu
The shuttle effect and the sluggish reaction kinetics of lithium polysulfide (LiPS) seriously compromise the performance of lithium–sulfur batteries (LSBs). To overcome these limitations and enable the fabrication of robust LSBs, here the use of a Mott–Schottky catalyst based on bimetallic phosphide CoFeP nanocrystals supported on carbon nitride tubular nanostructures as sulfur hosts is proposed. Theoretical calculations and experimental data confirm that CoFeP@CN composites are characterized by a suitable electronic structure and charge rearrangement that allows them to act as a Mott–Schottky catalyst to accelerate LiPS conversion. In addition, the tubular geometry of CoFeP@CN composites facilitates the diffusion of Li ions, accommodates volume change during the reaction, and offers abundant lithiophilic/sulfiphilic sites to effectively trap soluble LiPS. Therefore, S@CoFeP@CN electrodes deliver a superior rate performance of 630 mAh g at 5 C, and remarkable cycling stability with 90.44% capacity retention over 700 cycles. Coin cells with high sulfur loading, 4.1 mg cm, and pouch cells with 0.1 Ah capacities are further produced to validate their superior cycling stability. In addition, it is demonstrated here that CoFeP@CN hosts greatly alleviate the often overlooked issues of low energy efficiency and serious self-discharging in LSBs., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project ENE2016-77798-C4-3-R, and ENE2017-85087-C3. C.Q.Z., R.F.D., K.X., D.W.Y., T.Z., and X.W. thank the China Scholarship Council for the scholarship support. The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 acknowledges the support from the Severo Ochoa Programme (MINECO, grant no. SEV-2017-0706) and was funded by the CERCA Programme/Generalitat de Catalunya. J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128 and to ICREA Academia program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the Electronic Bandgap of Graphdiyne by H-Substitution to Promote Interfacial Charge Carrier Separation for Enhanced Photocatalytic Hydrogen Production

  • Li, Jian
  • Slassi, Amine
  • Han, Xu
  • Cornil, David
  • Ha-Thi, Minh-Huong
  • Pino, Thomas
  • Debecker, Damien P.
  • Colbeau-Justin, Christophe
  • Arbiol, Jordi
  • Cornil, Jérôme
  • Ghazzal, Mohamed Nawfal
Graphdiyne (GDY), which features a highly π-conjugated structure, direct bandgap, and high charge carrier mobility, presents the major requirements for photocatalysis. Up to now, all photocatalytic studies are performed without paying too much attention on the GDY bandgap (1.1 eV at the GW many-body theory level). Such a narrow bandgap is not suitable for the band alignment between GDY and other semiconductors, making it difficult to achieve efficient photogenerated charge carrier separation. Herein, for the first time, it is demonstrated that tuning the electronic bandgap of GDY via H-substitution (H-GDY) promotes interfacial charge separation and improves photocatalytic H evolution. The H-GDY exhibits an increased bandgap energy (≈2.5 eV) and exploitable conduction band minimum and valence band maximum edges. As a representative semiconductor, TiO is hybridized with both H-GDY and GDY to fabricate a heterojunction. Compared to the GDY/TiO, the H-GDY/TiO heterojunction leads to a remarkable enhancement of the photocatalytic H generation by 1.35 times under UV–visible illumination (6200 µmol h g) and four times under visible light (670 µmol h g). Such enhancement is attributed to the suitable band alignment between H-GDY and TiO, which efficiently promotes the photogenerated electron and hole separation, as supported by density functional theory calculations., The work in Mons was supported by the Belgian National Fund for Scientific Research (FRS-FNRS). Computational resources were provided by the Consortium des Équipements de Calcul Intensif (CÉCI) funded by F.R.S.-FNRS under Grant No. 2.5020.11. J.C. is an FNRS research director. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and was funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work was performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. X.H. thanks China Scholarship Council for scholarship support (201804910551).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct Observation of the Chemical Transformations in BiVO4 Photoanodes upon Prolonged Light-Aging Treatments

  • Arcas, Ramón
  • Cardenas-Morcoso, Drialys
  • Spadaro, Maria Chiara
  • García-Tecedor, Miguel
  • Mesa, Camilo A.
  • Arbiol, Jordi
  • Fabregat-Santiago, Francisco
  • Giménez, Sixto
  • Mas-Marzá, Elena
Exposing BiVO photoanodes to light-aging treatments is known to produce a significant photocurrent enhancement. Until now, the interpretation given to this phenomenon is associated to the formation of oxygen vacancies and little is reported about chemical changes in the material. Herein, the chemical segregation of Bi species toward the surface upon light-aging treatment is demonstrated, which takes place with the concomitant formation of intra-bandgap states associated to the oxygen vacancies. It is further demonstrated that these intra-bandgap states are photoactive and generate photocurrent under infrared excitation. These results highlight the importance of understanding light-induced effects while employing multinary metal oxide photoelectrodes., The authors thank support from the projects ENE2017-85087-C3-1-R, PID2020-116093RB-C41, PID2020-116093RB -C43 and Network of Excellence CAT&SCALE (RED2018-102459-T), funded by MCIN/ AEI/10.13039/501100011033. University Jaume I (UJI-B2019-20) and Generalitat Valenciana (PROMETEO/2020/028) are also acknowledged for financial support. Serveis Centrals d’Instrumentació Científica from UJI are also acknowledged for SEM, TEM, Raman, and XRD measurements. M.C.S. and J.A. acknowledge funding from Generalitat de Catalunya 2017 SGR 327. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. M.C.S. has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement no. 754510 (PROBIST) and the Severo Ochoa programme. C.A.M. acknowledges the University Jaume I for the postdoc fellowship POSDOC/2019/20 and Generalitat Valenciana for the APOSTD/2021/251 fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enabling full-scale grain boundary mitigation in polycrystalline perovskite solids

  • Zhao, Lichen
  • Tang, Peng-Yi
  • Luo, Deying
  • Dar, M. Ibrahim
  • Eickemeyer, Félix T.
  • Arora, Neha
  • Hu, Qin
  • Luo, Jingshan
  • Liu, Yuhang
  • Zakeeruddin, Shaik Mohammed
  • Hagfeldt, Anders
  • Arbiol, Jordi
  • Huang, Wei
  • Gong, Qihuang
  • Russell, Thomas P.
  • Friend, Richard H.
  • Grätzel, Michael
  • Zhu, Rui
There exists a considerable density of interaggregate grain boundaries (GBs) and intra-aggregate GBs in polycrystalline perovskites. Mitigation of intra-aggregate GBs is equally notable to that of interaggregate GBs as intra-aggregate GBs can also cause detrimental effects on the photovoltaic performances of perovskite solar cells (PSCs). Here, we demonstrate full-scale GB mitigation ranging from nanoscale intra-aggregate to submicron-scale interaggregate GBs, by modulating the crystallization kinetics using a judiciously designed brominated arylamine trimer. The optimized GB-mitigated perovskite films exhibit reduced nonradiative recombination, and their corresponding mesostructured PSCs show substantially enhanced device efficiency and long-term stability under illumination, humidity, or heat stress. The versatility of our strategy is also verified upon applying it to different categories of PSCs. Our discovery not only specifies a rarely addressed perspective concerning fundamental studies of perovskites at nanoscale but also opens a route to obtain high-quality solution-processed polycrystalline perovskites for high-performance optoelectronic devices., This work was financially supported by Beijing Natural Science Foundation (JQ21005), the National Key R&D Program of China (2021YFB3800100 and 2021YFB3800101), the National Natural Science Foundation of China (91733301 and 62104221), the China Postdoctoral Science Foundation (2020M670036), and the R&D Fruit Fund (20210001). M.G. and S.M.Z. thank the King Abdulaziz City for Science and Technology (KACST) for financial support. M.I.D. acknowledges funding from the Royal Society. N.A. and R.H.F. thank the EPSRC project SUNRISE (EP/P032591/1). Q.H. and T.P.R. were supported by the U.S. Office of Naval Research under contract N00014-17-1-2241. Q.H. thanks the support from USTC Research funds of the Double First-Class Initiative (YD2100002007). We thank the support for sample preparation at Molecular Foundry of Lawrence Berkeley National Laboratory (LBNL), which is supported by the Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under contract no. DE-AC02-05CH11231. We also acknowledge the GIXD measurements at beamline 7.3.3 of Advanced Light Source (LBNL), which is a DOE Office of Science User Facility under contract no. DE-AC02-05CH11231. P.T. and J.A. acknowledge the funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

FeS2-Decorated Carbon NanoFiber as Solid Phase Conversion-Type Cathode for Li-S Batteries

  • Jacas Biendicho, Jordi
  • Mazaira, Pedro
  • Avireddy, Hemesh
  • Zhang, Chaoqi
  • Tang, Peng-Yi
  • Missyul, Alexander
  • Trilla, Lluis
  • Arbiol, Jordi
  • Morante, Joan Ramón
  • Cabot, Andreu
A new cathode material, FeS2-decorated carbon nanofiber (CNF), is proposed for Li-S batteries. The structure and physicochemical properties of the material have been engineered to enhance the poor cycling stability typically displayed by sulfur composites. The composite material shows a complex architecture with a matrix of CNF hosting the sulfur and core-shell FeS2 nanoparticles acting as a catalyst for a solid phase conversion-type reaction. This cathode delivers high discharge capacities of 864, 798, 689, 595 and 455 mAhg−1 at C/10, C/5, C/2, 1C and 2C, respectively, with a stable capacity retention of 87% at 2C after 300 cycles. FeS2-decorated CNF has been characterised using several techniques, including in-situ battery measurements at the ALBA synchrotron facility and high-throughput microscopy, giving valuable insights into its charge/discharge reaction mechanism. The excellent performance obtained is combined with the use of just low-cost and abundant elements such as iron, sulfur and carbon, which makes this battery highly promising for the next generation of electrochemical energy storage devices., The authors acknowledge funding from Generalitat de Catalunya 2021 SGR 01581 and 2021 SGR 00457 the Spanish MINECO project ENE2017-85087-C3. IREC and ICN2 are funded by the CERCA Programme/Generalitat de Catalunya. The authors thank support from the project NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. This study was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MCIN/AEIN (Grant No.: CEX2021-001214-S). IREC acknowledges additional support from the European Regional Development Funds (ERDF, FEDER). Jordi Jacas Biendicho acknowledges the fellowship RYC2021-034994-I, funded by MCIN/AEI/10.13039/501100011033 and the European Union «NextGenerationEU»/PRTR». In-situ diffraction measurements experiments were performed at BL04-MSPD beamline at ALBA Synchrotron with the collaboration of ALBA staff under proposal number 2016091931., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Lead Sulfide Nanocubes for Solar Energy Storage

  • Lemsi, A.
  • Cardenas-Morcoso, D.
  • Haro, M.
  • Gil-Barrachina, C.
  • Aranda, C.
  • Maghraoui-Meherzi, H.
  • García-Tecedor, M.
  • Giménez, S.
  • Julián-López, B.
Lead sulfide (PbS) nanocubes are produced by a very simple solvothermal procedure that uses a unique molecule, ethylenediamine, as solvent and capping ligand to control the size and shape of the nanocrystals. Detailed structural, optical, and photoelectrochemical evaluation confirms the suitability of these nanoparticles for photocapacitive applications, when synergistically combined with spin-coated BiVO4 photoelectrodes, as derived from the estimated energy diagram. Furthermore, the p–n junction facilitates the photo-oxidation of PbS nanoparticles under light irradiation. In the dark, the photogenerated charges are released providing an electric output response with a solar-to-current efficiency of 0.042%, storing extra energy to the H2 produced by water splitting when the BiVO4 photoanode works under illumination. Herein, the importance of the synthetic route and methodology to ensemble materials for advanced solar energy storage applications is highlighted.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Colloidal synthesis of CsX nanocrystals (X = Cl, Br, I)

  • Shaw, Peter J.
  • Meyns, Michaela|||0000-0003-2476-9001
  • Zuo, Yong|||0000-0003-1564-467X
  • Grau Carbonell, Albert
  • Lagoudakis, Pavlos G.
  • Charlton, Martin D. B.
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Kanaras, Antonios G.
A facile colloidal synthesis of highly ionic cesium halide nanocrystals is reported. Colloidal nanocrystals of CsI, CsCl and CsBr with unprecedentedly small dimensions are obtained using oleylammonium halides and cesium oleate as precursors. The ease and adaptability of our method enables its universalization for the formation of other highly ionic nanocrystals.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Template-Assisted Scalable Nanowire Networks

  • Friedl, Martin
  • Cerveny, Kris
  • Weigele, Pirmin
  • Tütüncüoglu, Gözde
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Huang, Chunyi
  • Patlatiuk, Taras
  • Potts, Heidi A.
  • Sun, Zhiyuan|||0000-0003-3981-9083
  • Hill, Megan O.|||0000-0002-7663-7986
  • Güniat, Lucas|||0000-0001-7883-4433
  • Kim, Wonjong
  • Zamani, Mahdi|||0000-0003-0750-2938
  • Dubrovskii, Vladimir G.|||0000-0003-2088-7158
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Lauhon, Lincoln J.|||0000-0001-6046-3304
  • Zumbühl, Dominik M.
  • Fontcuberta i Morral, Anna|||0000-0002-5070-2196
Topological qubits based on Majorana Fermions have the potential to revolutionize the emerging field of quantum computing by making information processing significantly more robust to decoherence. Nanowires are a promising medium for hosting these kinds of qubits, though branched nanowires are needed to perform qubit manipulations. Here we report a gold-free templated growth of III-V nanowires by molecular beam epitaxy using an approach that enables patternable and highly regular branched nanowire arrays on a far greater scale than what has been reported thus far. Our approach relies on the lattice-mismatched growth of InAs on top of defect-free GaAs nanomembranes yielding laterally oriented, low-defect InAs and InGaAs nanowires whose shapes are determined by surface and strain energy minimization. By controlling nanomembrane width and growth time, we demonstrate the formation of compositionally graded nanowires with cross-sections less than 50 nm. Scaling the nanowires below 20 nm leads to the formation of homogeneous InGaAs nanowires, which exhibit phase-coherent, quasi-1D quantum transport as shown by magnetoconductance measurements. These results are an important advance toward scalable topological quantum computing.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

NiSn bimetallic nanoparticles as stable electrocatalysts for methanol oxidation reaction

  • Li, Junshan|||0000-0002-1482-1972
  • Luo, Zhishan|||0000-0002-0801-9238
  • Zuo, Yong|||0000-0003-1564-467X
  • Liu, Junfeng|||0000-0003-3164-6472
  • Zhang, Ting|||0000-0002-0317-9662
  • Tang, PengYi|||0000-0002-2306-095X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Nickel is an excellent alternative catalyst to high cost Pt and Pt-group metals as anode material in direct methanol fuel cells. However, nickel presents a relatively low stability under operation conditions, even in alkaline media. In this work, a synthetic route to produce bimetallic NiSn nanoparticles (NPs) with tuned composition is presented. Through co-reduction of the two metals in the presence of appropriate surfactants, 3-5 nm NiSn NPs with tuned Ni/Sn ratios were produced. Such NPs were subsequently supported on carbon black and tested for methanol electro-oxidation in alkaline media. Among the different stoichiometries tested, the most Ni-rich alloy exhibited the highest electrocatalytic activity, with mass current density of 820 mA mg⁻¹ at 0.70 V (vs. Hg/HgO). While this activity was comparable to that of pure nickel NPs, NiSn alloys showed highly improved stabilities over periods of 10,000 s at 0.70 V. We hypothesize this experimental fact to be associated to the collaborative oxidation of the byproducts of methanol which poison the Ni surface or to the prevention of the tight adsorption of these species on the Ni surface by modifying its surface chemistry or electronic density of states.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

On the role of ceria in Ni-Al₂O₃ catalyst for CO₂ plasma methanation

  • Biset-Peiró, Martí|||0000-0002-1255-7733
  • Guilera, Jordi
  • Zhang, Ting
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Andreu, Teresa|||0000-0002-2804-4545
The effect of Ce loading content on Ni-CeO₂/Ni-Al₂O₃ catalysts for CO₂ plasma methanation was evaluated. Catalysts were prepared by one-pot evaporation-induced self-assembly, Ni content was fixed at 15 wt. %, while CeO₂ ranged 0-50 wt. %. The catalysts performances were tested under atmospheric pressure in two operation modes, thermal- and plasma-catalysis. As for conventional thermal catalysis, the catalyst was thermally activated between 200 and 400 °C; while in plasma-catalysis, the catalyst was activated by plasma generated by a dielectric barrier discharges (DBD) reactor. By the application of plasma in the catalyst bed, the reaction temperature was reduced from 350 °C to 150 °C to obtain the same level of conversion than thermal-catalysis. In addition, the incorporation of Ce in Ni-CeO₂/Ni-Al₂O₃ led to an improvement of the catalytic performance in both thermal- and plasma-catalysis. Nevertheless, divergences on the optimum Ce content were found. On plasma experiments, the catalyst was more active at a lower amount of CeO₂ (˜10 wt.%) with respect to thermal catalysis (˜40 wt.%), reducing the catalyst fabrication cost. Those differences highlights that the CO generated by plasma CO₂ dissociation has a significant role for methane production, and thus the need to consider the by-products as reactant for the optimization of catalysts composition for DBD plasma-catalysis.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Optical emission of GaN/AlN quantum-wires-the role of charge transfer from a nanowire template

  • Müßener, Jan
  • Greif, Ludwig A. Th.
  • Kalinowski, Stefan
  • Callsen, Gordon|||0000-0001-6390-3977
  • Hille, Pascal
  • Schörmann, Jörg
  • Wagner, Markus R..|||0000-0002-7367-5629
  • Schliwa, Andrei
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Hoffmann, Axel
  • Eickhoff, Martin
We show that one-dimensional (1d) GaN quantum-wires (QWRs) exhibit intense and spectrally sharp emission lines. These QWRs are realized in an entirely self-assembled growth process by molecular beam epitaxy (MBE) on the side facets of GaN/AlN nanowire (NW) heterostructures. Time-integrated and time-resolved photoluminescence (PL) data in combination with numerical calculations allow the identification and assignment of the manifold emission features to three different spatial recombination centers within the NWs. The recombination processes in the QWRs are driven by efficient charge carrier transfer effects between the different optically active regions, providing high intense QWR luminescence despite their small volume. This is deduced by a fast rise time of the QWR PL, which is similar to the fast decay-time of adjacent carrier reservoirs. Such processes, feeding the ultra-narrow QWRs with carriers from the relatively large NWs, can be the key feature towards the realization of future QWR-based devices. While processing of single quantum structures with diameters in the nm range presents a serious obstacle with respect to their integration into electronic or photonic devices, the QWRs presented here can be analyzed and processed using existing techniques developed for single NWs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Triphenyl phosphite as the phosphorus source for the scalable and cost-effective production of transition metal phosphides

  • Liu, Junfeng|||0000-0003-3164-6472
  • Meyns, Michaela|||0000-0003-2476-9001
  • Zhang, Ting|||0000-0002-0317-9662
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Shavel, Alexey|||0000-0002-3995-0391
Transition metal phosphides have great potential to optimize a number of functionalities in several energy conversion and storage applications, particularly when nanostructured or in nanoparticle form. However, the synthesis of transition metal phosphide nanoparticles and its scalability is often limited by the toxicity, air sensitivity, and high cost of the reagents used. We present here a simple, scalable, and cost-effective "heating up" procedure to produce metal phosphides using inexpensive, low-toxicity, and air-stable triphenyl phosphite as source of phosphorus and chlorides as metal precursors. This procedure allows the synthesis of a variety of phosphide nanoparticles, including phosphides of Ni, Co, and Cu. The use of carbonyl metal precursors further allowed the synthesis of FeP and MoP nanoparticles. The fact that minor modifications in the experimental parameters allowed producing nanoparticles with different compositions and even to tune their size and shape shows the high potential and versatility of the triphenyl phosphite precursor and the presented method. We also detail here a methodology to displace organic ligands from the surface of phosphide nanoparticles, which is a key step toward their application in energy conversion and storage systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Supported Mn₃O₄ nanosystems for hydrogen production through ethanol photoreforming

  • Barreca, Davide|||0000-0002-8779-3386
  • Bigiani, Lorenzo|||0000-0001-7404-2340
  • Monai, Mateo
  • Carraro, Giorgio
  • Gasparotto, Alberto|||0000-0003-4626-651X
  • Sada, Cinzia|||0000-0002-7607-0481
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Grau Carbonell, Albert
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Maccato, Chiara|||0000-0001-6368-5754
  • Fornasiero, Paolo|||0000-0003-1082-9157
Photoreforming promoted by metal oxide nanophotocatalysts is an attractive route for clean and sustainable hydrogen generation. In the present work, we propose for the first time the use of supported MnO nanosystems, both pure and functionalized with Au nanoparticles (NPs), for hydrogen generation by photoreforming. The target oxide systems, prepared by chemical vapor deposition (CVD) and decorated with gold NPs by radio frequency (RF) sputtering, were subjected to a thorough chemico-physical characterization and utilized for a proof-of-concept H₂ generation in aqueous ethanolic solutions under simulated solar illumination. Pure MnO nanosystems yielded a constant hydrogen production rate of 10 mmol h⁻¹ m⁻² even for irradiation times up to 20 h. The introduction of Au NPs yielded a significant enhancement in photocatalytic activity, which decreased as a function of irradiation time. The main phenomena causing the Au-containing photocatalyst deactivation have been investigated by morphological and compositional analysis, providing important insights for the design of Mn₃O₄-based photocatalysts with improved performances.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The Role of polarity in nonplanar semiconductor nanostructures

  • De La Mata, Maria|||0000-0002-1581-4838
  • Zamani, Reza|||0000-0001-6940-0000
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Eickhoff, Martin
  • Xiong, Qihua|||0000-0002-2555-4363
  • Fontcuberta i Morral, Anna|||0000-0002-5070-2196
  • Caroff, Philippe
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
The lack of mirror symmetry in binary semiconductor compounds turns them into polar materials, where two opposite orientations of the same crystallographic direction are possible. Interestingly, their physical properties (e.g., electronic or photonic) and morphological features (e.g., shape, growth direction, and so forth) also strongly depend on the polarity. It has been observed that nanoscale materials tend to grow with a specific polarity, which can eventually be reversed for very specific growth conditions. In addition, polar-directed growth affects the defect density and topology and might induce eventually the formation of undesirable polarity inversion domains in the nanostructure, which in turn will affect the photonic and electronic final device performance. Here, we present a review on the polarity-driven growth mechanism at the nanoscale, combining our latest investigation with an overview of the available literature highlighting suitable future possibilities of polarity engineering of semiconductor nanostructures. The present study has been extended over a wide range of semiconductor compounds, covering the most commonly synthesized III-V (GaN, GaP, GaAs, GaSb, InN, InP, InAs, InSb) and II-VI (ZnO, ZnTe, CdS, CdSe, CdTe) nanowires and other free-standing nanostructures (tripods, tetrapods, belts, and membranes). This systematic study allowed us to explore the parameters that may induce polarity-dependent and polarity-driven growth mechanisms, as well as the polarity-related consequences on the physical properties of the nanostructures.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Compositionally tuned NixSn alloys as anode materials for lithium-ion and sodium-ion batteries with a high pseudocapacitive contribution

  • Li, Junshan|||0000-0002-1482-1972
  • Xu, Xijun
  • Luo, Zhishan|||0000-0002-0801-9238
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Zuo, Yong|||0000-0003-1564-467X
  • Zhang, Ting|||0000-0002-0317-9662
  • Tang, PengYi|||0000-0002-2306-095X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Liu, Jun|||0000-0001-5288-3042
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Nickel tin alloy nanoparticles (NPs) with tuned composition NixSn (0.6 ≤ x ≤ 1.9) were synthesized by a solution-based procedure and used as anode materials for Li-ion batteries (LIBs) and Na-ion batteries (SIBs). Among the compositions tested, Ni₀₉Sn-based electrodes exhibited the best performance in both LIBs and SIBs. As LIB anodes, Ni₀₉Sn-based electrodes delivered charge-discharge capacities of 980 mAh g⁻¹ after 340 cycles at 0.2 A g⁻¹ rate, which surpassed their maximum theoretical capacity considering that only Sn is lithiated. A kinetic characterization of the charge-discharge process demonstrated the electrode performance to be aided by a significant pseudocapacitive contribution that compensated for the loss of energy storage capacity associated to the solid-electrolyte interphase formation. This significant pseudocapacitive contribution, which not only translated into higher capacities but also longer durability, was associated to the small size of the crystal domains and the proper electrode composition. The performance of NixSn-based electrodes toward Na-ion storage was also characterized, reaching significant capacities above 200 mAh g⁻¹ at 0.1 A g⁻¹ but with a relatively fast fade over 120 continuous cycles. A relatively larger pseudocapacitive contribution was obtained in Ni Sn-based electrodes for SIBs when compared with LIBs, consistently with the lower contribution of the Na ion diffusion associated to its larger size.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Optical Analysis of Oxygen Self-Diffusion in Ultrathin CeO2 Layers at Low Temperatures

  • Neuderth, Paula|||0000-0003-3468-2815
  • Hille, Pascal
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • De La Mata, Maria|||0000-0002-1581-4838
  • Coll, Mariona|||0000-0001-5157-7764
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Eickhoff, Martin
An optical in situ strategy for the analysis of oxygen diffusion in ultrathin ceria layers with a thickness of 2-10 nm at temperatures between 50 and 200 °C is presented, which allows for the determination of diffusion coefficients. This method is based on the sensitivity of the photoluminescence (PL) intensity of InGaN nanowires to adsorbed oxygen. The oxygen diffusion through an ultrathin CeO coating deposited on the InGaN nanowires is monitored by analyzing the transient PL behavior of the InGaN nanowires, which responds to changes of the oxygen concentration in the environment when the corresponding oxygen concentration is established at the CeO/InGaN interface due to diffusion through the coating. Quantitative evaluation of the oxygen diffusion in CeO based on a model considering Langmuir Adsorption and recombination yields a diffusion coefficient D of (2.55 ± 0.05) × 10 cm s at a temperature of 100 °C. Temperature-dependent measurements reveal an Arrhenius type behavior of D with an activation energy of (0.28 ± 0.04) eV. In contrast, no oxygen diffusion is detected for an ultrathin layer (≥5 nm) of AlO, which is known as a poor oxygen ion conductor within the analyzed temperature regime.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

High Thermoelectric Performance in Crystallographically Textured n-Type Bi2Te3- xSex Produced from Asymmetric Colloidal Nanocrystals

  • Liu, Yu|||0000-0001-7313-6740
  • Zhang, Yu|||0000-0002-0332-0013
  • Lim, Khak Ho|||0000-0003-3116-8589
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Ortega, Silvia|||0000-0002-3812-5146
  • Li, Mengyao|||0000-0002-9082-7938
  • David, Jérémy|||0000-0003-3219-149X
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Ng, Ka Ming
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Cadavid, Doris|||0000-0002-1376-6078
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
In the present work, we demonstrate crystallographically textured n-type BiTeSe nanomaterials with exceptional thermoelectric figures of merit produced by consolidating disk-shaped BiTeSe colloidal nanocrystals (NCs). Crystallographic texture was achieved by hot pressing the asymmetric NCs in the presence of an excess of tellurium. During the hot press, tellurium acted both as lubricant to facilitate the rotation of NCs lying close to normal to the pressure axis and as solvent to dissolve the NCs approximately aligned with the pressing direction, which afterward recrystallize with a preferential orientation. NC-based BiTeSe nanomaterials showed very high electrical conductivities associated with large charge carrier concentrations, n. We hypothesize that such large n resulted from the presence of an excess of tellurium during processing, which introduced a high density of donor Te antisites. Additionally, the presence in between grains of traces of elemental Te, a narrow band gap semiconductor with a work function well below BiTeSe, might further contribute to increase n through spillover of electrons, while at the same time blocking phonon propagation and hole transport through the nanomaterial. NC-based BiTeSe nanomaterials were characterized by very low thermal conductivities in the pressing direction, which resulted in ZT values up to 1.31 at 438 K in this direction. This corresponds to a ca. 40% ZT enhancement from commercial ingots. Additionally, high ZT values were extended over wider temperature ranges due to reduced bipolar contribution to the Seebeck coefficient and the thermal conductivity. Average ZT values up to 1.15 over a wide temperature range, 320 to 500 K, were measured, which corresponds to a ca. 50% increase over commercial materials in the same temperature range. Contrary to most previous works, highest ZT values were obtained in the pressing direction, corresponding to the c crystallographic axis, due to the predominance of the thermal conductivity reduction over the electrical conductivity difference when comparing the two crystal directions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Colloidal Ni2-, XCoxP nanocrystals for the hydrogen evolution reaction

  • Liu, Junfeng|||0000-0003-3164-6472
  • Wang, Zhenxing|||0000-0001-5083-0975
  • David, Jérémy|||0000-0003-3219-149X
  • Llorca, Jordi|||0000-0002-7447-9582
  • Li, Junshan|||0000-0002-1482-1972
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Shavel, Alexey|||0000-0002-3995-0391
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Meyns, Michaela|||0000-0003-2476-9001
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
A cost-effective and scalable approach was developed to produce monodisperse NiCoP nanocrystals (NCs) with composition tuned over the entire range (0 ≤ x ≤ 2). NiCoP NCs were synthesized using low-cost, stable and low-toxicity triphenyl phosphite (TPP) as a phosphorus source, metal chlorides as metal precursors and hexadecylamine (HDA) as a ligand. The synthesis involved the nucleation of amorphous Ni-P and its posterior crystallization and simultaneous incorporation of Co. The composition, size and morphology of the NiCoP NCs could be controlled simply by varying the ratio of Ni and Co precursors and the amounts of TPP and HDA. Ternary NiCoP-based electrocatalysts exhibited enhanced electrocatalytic activity toward the hydrogen evolution reaction (HER) compared to binary phosphides. In particular, NiCoP electrocatalysts displayed the lowest overpotential of 97 mV at J = 10 mA cm and an excellent long-term stability. DFT calculations of the Gibbs free energy for hydrogen adsorption at the surface of NiCoP NCs showed NiCoP to have the most appropriate composition to optimize this parameter within the whole NiCoP series. However, the hydrogen adsorption energy was demonstrated not to be the only parameter controlling the HER activity in NiCoP.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tin Diselenide Molecular Precursor for Solution-Processable Thermoelectric Materials

  • Zhang, Yu|||0000-0002-0332-0013
  • Liu, Yu|||0000-0001-7313-6740
  • Lim, Khak Ho|||0000-0003-3116-8589
  • Xing, Congcong|||0000-0001-7674-6720
  • Li, Mengyao|||0000-0002-9082-7938
  • Zhang, Ting|||0000-0002-0317-9662
  • Tang, PengYi|||0000-0002-2306-095X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Ng, Ka Ming
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Guardia, Pablo|||0000-0001-9076-4642
  • Prato, Mirko|||0000-0002-2188-8059
  • Cadavid, Doris|||0000-0002-1376-6078
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
In the present work, we detail a fast and simple solution-based method to synthesize hexagonal SnSe nanoplates (NPLs) and their use to produce crystallographically textured SnSe nanomaterials. We also demonstrate that the same strategy can be used to produce orthorhombic SnSe nanostructures and nanomaterials. NPLs are grown through a screw dislocation-driven mechanism. This mechanism typically results in pyramidal structures, but we demonstrate here that the growth from multiple dislocations results in flower-like structures. Crystallographically textured SnSe bulk nanomaterials obtained from the hot pressing of these SnSe structures display highly anisotropic charge and heat transport properties and thermoelectric (TE) figures of merit limited by relatively low electrical conductivities. To improve this parameter, SnSe NPLs are blended here with metal nanoparticles. The electrical conductivities of the blends are significantly improved with respect to bare SnSe NPLs, what translates into a three-fold increase of the TE Figure of merit, reaching unprecedented ZT values up to 0.65.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Controllable vapor phase fabrication of F:Mn3O4 thin films functionalized with Ag and TiO2

  • Bigiani, Lorenzo|||0000-0001-7404-2340
  • Barreca, Davide|||0000-0002-8779-3386
  • Gasparotto, Alberto|||0000-0003-4626-651X
  • Sada, Cinzia|||0000-0002-7607-0481
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Maccato, Chiara|||0000-0001-6368-5754
A facile two-step vapor phase synthetic approach is proposed for the fabrication of MnO thin films chemically modified with fluorine, and eventually functionalized with silver or titania. The adopted strategy exploits the initial chemical vapor deposition (CVD) of MnO on Si(100) substrates starting from a diamine diketonate Mn(ii) complex, followed by the controlled radio frequency (RF)-sputtering of silver or titania. Complementary analytical techniques were employed to investigate the crystallinity (X-ray diffraction), chemical composition (X-ray photoelectron spectroscopy, secondary ion mass spectrometry, energy dispersive X-ray spectroscopy), morphology and nano-organization (field emission-scanning electron microscopy, atomic force microscopy, transmission electron microscopy) of both pristine and functionalized manganese oxide thin films. Under the adopted operating conditions, the target Mn(ii) complex acted as a single-source precursor for both Mn and F, leading to the formation of phase-pure hausmannite MnO films characterized by a uniform in-depth fluorine content. In addition, the obtained results gave evidence of the formation of high purity Ag/F:MnO and TiO/F:MnO composites with a close contact between the single constituents. This work outlines an amenable and efficient method for the vapor phase growth of composite MnO-based thin films, which are favorable candidates for diverse technological applications, from photocatalysis to gas sensing.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Colloidal Ni-Co-Sn nanoparticles as efficient electrocatalysts for the methanol oxidation reaction

  • Li, Junshan|||0000-0002-1482-1972
  • Luo, Zhishan|||0000-0002-0801-9238
  • He, Feng
  • Zuo, Yong|||0000-0003-1564-467X
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Liu, Junfeng|||0000-0003-3164-6472
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Du, Ruifeng
  • Zhang, Ting|||0000-0002-0317-9662
  • Infante Carrió, María F.
  • Tang, PengYi|||0000-0002-2306-095X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The deployment of direct methanol fuel cells requires engineering cost-effective and durable electrocatalysts for the methanol oxidation reaction (MOR). As an alternative to noble metals, Ni-based alloys have shown excellent performance and good stability toward the MOR. Herein, we present a series of NiCoSn colloidal nanoparticles (NPs) with composition tuned over the entire Ni/Co range (0 ≤ x ≤ 3). We demonstrate electrodes based on these ternary NPs to provide improved catalytic performance toward the MOR in an alkaline medium when compared with binary NiSn NPs. A preliminary composition optimization resulted in NiCoSn NP-based electrodes exhibiting extraordinary mass current densities, up to 1050 mA mg, at 0.6 V vs. Hg/HgO in 1.0 M KOH containing 1.0 M methanol. This current density was about two-fold higher than that of NiSn electrodes (563 mA mg). The excellent performance obtained with the substitution of small amounts of Ni by Co was concomitant with an increase of the surface coverage of active species and an enhancement of the diffusivity of the reaction limiting species. Additionally, saturation of the catalytic activity at higher methanol concentrations was measured for NiCoSn NP-based electrodes containing a small amount of Co when compared with binary NiSn NPs. While the electrode stability was improved with respect to elemental Ni NP-based electrodes, the introduction of small amounts of Co slightly decreased the cycling performance. Additionally, Sn, a key element to improve stability with respect to elemental Ni NPs, was observed to slowly dissolve in the presence of KOH. Density functional theory calculations on metal alloy surfaces showed the incorporation of Co within the NiSn structure to provide more effective sites for CO and CHOH adsorption. However, the relatively lower stability could not be related to CO or CHOH poisoning.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

SnP nanocrystals as anode materials for Na-ion batteries

  • Liu, Junfeng|||0000-0003-3164-6472
  • Wang, Shutao|||0000-0002-1689-2272
  • Kravchyk, Kostiantyn
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Krumeich, Frank|||0000-0001-5625-1536
  • Widmer, Roland
  • Nasiou, Déspina
  • Meyns, Michaela|||0000-0003-2476-9001
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Kovalenko, Maksym V.|||0000-0002-6396-8938
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Tin monophosphide is a layered material consisting of Sn-P-P-Sn sandwiches that are stacked on top of each other to form a three dimensional crystallographic structure. Its composition and crystal structure makes it an excellent candidate anode material for sodium-ion batteries (SIBs). However, SnP is yet to be explored for such and other applications due to its challenging synthesis. In the present work, we report the synthesis of SnP nanocrystals (NCs) from the reaction of hexamethylphosphorous triamide (HMPT) and a tin phosphonate prepared from tin oxalate and a long chain phosphonic acid. SnP NCs obtained from this reaction displayed a spherical geometry and a trigonal crystallographic phase with a superstructure attributed to ordered diphosphorus pairs. Such NCs were mixed with carbon black and used as anode materials in SIBs. SIBs based on SnP NCs and sodium(i) bis(fluorosulfonyl)imide (NaFSI) electrolyte displayed a high reversible capacity of 600 mA h g at a current density of 100 mA g and cycling stability for over 200 cycles. Their excellent cycling performance is associated with both the small size of the crystal domains and the particular composition and phase of SnP which prevent mechanical disintegration and major phase separation during sodiation and desodiation cycles. These results demonstrate SnP to be an attractive anode material for sodium ion batteries.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Reduction of Thermal Conductivity in Nanowires by Combined Engineering of Crystal Phase and Isotope Disorder

  • Mukherjee, Samik|||0000-0002-5279-1110
  • Givan, Uri
  • Senz, Stephan
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Moutanabbir, Oussama|||0000-0002-0721-3696
Nanowires are a versatile platform to investigate and harness phonon and thermal transport phenomena in nanoscale systems. With this perspective, we demonstrate herein the use of crystal phase and mass disorder as effective degrees of freedom to manipulate the behavior of phonons and control the flow of local heat in silicon nanowires. The investigated nanowires consist of isotopically pure and isotopically mixed nanowires bearing either a pure diamond cubic or a cubic-rhombohedral polytypic crystal phase. The nanowires with tailor-made isotopic compositions were grown using isotopically enriched silane precursors SiH, SiH, and SiH with purities better than 99.9%. The analysis of polytypic nanowires revealed ordered and modulated inclusions of lamellar rhombohedral silicon phases toward the center in otherwise diamond-cubic lattice with negligible interphase biaxial strain. Raman nanothermometry was employed to investigate the rate at which the local temperature of single suspended nanowires evolves in response to locally generated heat. Our analysis shows that the lattice thermal conductivity in nanowires can be tuned over a broad range by combining the effects of isotope disorder and the nature and degree of polytypism on phonon scattering. We found that the thermal conductivity can be reduced by up to ∼40% relative to that of isotopically pure nanowires, with the lowest value being recorded for the rhombohedral phase in isotopically mixed Si Si nanowires with composition close to the highest mass disorder (x ∼ 0.5). These results shed new light on the fundamentals of nanoscale thermal transport and lay the groundwork to design innovative phononic devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Optimizing the yield of A-polar GaAs nanowires to achieve defect-free zinc blende structure and enhanced optical functionality

  • Zamani, Mahdi|||0000-0003-0750-2938
  • Tütüncüoglu, Gözde
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Francaviglia, Luca|||0000-0002-2138-0837
  • Güniat, Lucas|||0000-0001-7883-4433
  • Ghisalberti, Lea
  • Potts, Heidi A.
  • Friedl, Martin
  • Markov, Edoardo
  • Kim, Wonjong
  • Leran, Jean-Baptiste
  • Dubrovskii, Vladimir G.|||0000-0003-2088-7158
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Fontcuberta i Morral, Anna|||0000-0002-5070-2196
Compound semiconductors exhibit an intrinsic polarity, as a consequence of the ionicity of their bonds. Nanowires grow mostly along the (111) direction for energetic reasons. Arsenide and phosphide nanowires grow along (111)B, implying a group V termination of the (111) bilayers. Polarity engineering provides an additional pathway to modulate the structural and optical properties of semiconductor nanowires. In this work, we demonstrate for the first time the growth of Ga-assisted GaAs nanowires with (111)A-polarity, with a yield of up to ∼50%. This goal is achieved by employing highly Ga-rich conditions which enable proper engineering of the energies of A and B-polar surfaces. We also show that A-polarity growth suppresses the stacking disorder along the growth axis. This results in improved optical properties, including the formation of AlGaAs quantum dots with two orders or magnitude higher brightness. Overall, this work provides new grounds for the engineering of nanowire growth directions, crystal quality and optical functionality.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

III-V Integration on Si(100), Vertical Nanospades

  • Güniat, Lucas|||0000-0001-7883-4433
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Garcia, Oscar|||0000-0001-8541-7013
  • Boscardin, Mégane
  • Vindice, David
  • Tappy, Nicolas
  • Friedl, Martin
  • Kim, Wonjong
  • Zamani, Mahdi|||0000-0003-0750-2938
  • Francaviglia, Luca|||0000-0002-2138-0837
  • Balgarkashi, Akshay
  • Leran, Jean-Baptiste
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Fontcuberta i Morral, Anna|||0000-0002-5070-2196
III-V integration on Si(100) is a challenge: controlled vertical vapor liquid solid nanowire growth on this platform has not been reported so far. Here we demonstrate an atypical GaAs vertical nanostructure on Si(100), coined nanospade, obtained by a nonconventional droplet catalyst pinning. The Ga droplet is positioned at the tip of an ultrathin Si pillar with a radial oxide envelope. The pinning at the Si/oxide interface allows the engineering of the contact angle beyond the Young-Dupré equation and the growth of vertical nanospades. Nanospades exhibit a virtually defect-free bicrystalline nature. Our growth model explains how a pentagonal twinning event at the initial stages of growth provokes the formation of the nanospade. The optical properties of the nanospades are consistent with the high crystal purity, making these structures viable for use in integration of optoelectronics on the Si(100) platform.