Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 37
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Innovative Integration of High-Performance Floating Patch Antennas in Empty Substrate Integrated Waveguides

  • Herraiz Tirado, Dario
  • Fernandez, Marcos D.
  • Galeote Carballo, Ignacio
  • Alomainy, Akram
  • Belenguer, Angel
  • David Herraiz|||0000-0002-3793-6078
[EN] Substrate Integrated Circuits (SICs) represent a significant advancement in microwave communication systems due to their high efficiency, performance, and integration capabilities. Empty Substrate-Integrated Waveguides (ESIWs) are a type of SIC that offers benefits such as cost-effectiveness while maintaining high performance. This paper presents the design and implementation of the first floating patch antenna integrated into an ESIW, fed by a metallic rod. The proposed antenna is designed to operate in the X-band (8-12 GHz), with a resonance peak at 10 GHz. The patch antenna is square, which provides interesting radiation characteristics. It is excited by a metallic rod that connects the patch to the ESIW line, resulting in excellent performance in terms of measured radiation efficiency (over 90%) and -10 dB impedance bandwidth (approximately 20%). The prototype demonstrates minimal differences between the simulated and manufactured versions. These results highlight the potential of ESIW-fed floating patch antennas for advanced satellite communication systems. This will enable the integration of complete communication systems within ESIWs and facilitate the straightforward development of 2D element arrays., This work was partially supported by the coordinated Research Project PID2022-136590OB, Subproject C44, funded by MICIU/AEI/10.13039/501100011033, Spanish Government, and by ERDF A way of making Europe, EU, and partially supported by the coordinated Research Project TED2021-129196B, Subproject C44, funded by MICIU/AEI/10.13039/501100011033, Spanish Government, and by the European Union NextGenerationEU/PRTR. This work was developed thanks to the European social fund ESF+.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of the Effective Conductivity in Radio Frequency of Additive Manufacturing Materials

  • Bachiller Martin, Maria Carmen|||0000-0002-5518-5060
  • Voronov, Aleksandr Andreyevich|||0009-0008-4508-4400
  • Bosca Mayans, Francisco
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Ferrer-Claver, Álvaro
  • Capella-Argente, Murta
  • Sempere, Lluc
  • Kunowsky, Mirko
  • Martínez-García, Asunción
[EN] This work presents the characterization of the effective conductivity of additive manufacturing materials used for the fabrication of high-frequency communication devices. Factors such as material type, porosity, roughness, and oxidation reduce this conductivity, leading to increased insertion loss in the manufactured devices. For characterization, an X-band cavity resonator on a rectangular waveguide was designed, and the quality factor was measured for different implementations using various techniques and materials. Conductivity values of up to 17.70 MS/m were obtained for metalized polymeric materials and up to 6.44 MS/m for metallic alloys., This work has been funded by Agencia Valenciana de la Innovacion through the research project INNEST/2022/124, Union Europea NextGenerationEU/PRTR Project TED2021-129196B-C41/ AEI/10.13039/501100011033/ and FEDER, UE Project PID2022-136590OB-C41/ AEI/10.13039/501100011033/. The authors want to acknowledge the collaboration of Jose Ramon Blasco Puchades, Luis Portoles Grinan, Mario Martinez Ceniceros, Tomas Zanello Rial and Carlos Alberto Bloem Irazabal from AIDIMME Technological Institute in the manufacturing of the copper resonator.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Through-Wire Microstrip-to-Empty-Substrate-Integrated-Waveguide Transition at Ka-Band

  • Ballesteros, José A.
  • Belenguer, Angel
  • Fernández, Marcos D.
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] The advantages of the Substrate-Integrated Waveguide (SIW) in terms of low profile, integration with Printed Circuit Board (PCB) and low cost are maintained by the Empty Substrate-Integrated Waveguide (ESIW). Moreover, as the dielectric fill is avoided, other advantages are also added: resonators with higher quality factor and lower insertion losses. Since 2014, when it was proposed, several devices for X-band to Ka-band applications have been accurately designed and manufactured. In this way, transitions are one of the most important components, as they allow the connection between the ESIW and other planar transmision lines such as microstrip. To accomplish this aim, different transitions have been proposed in the literature: based on sharp dielectric tapers combining metallized and non-metallized parts, which increases the manufacture complexity; with a broadened ESIW section, that is less complex at the cost of increasing reflection and radiation losses due to the abrupt discontinuity; based on tapered artificial dielectric slab matrix, more difficult to mechanize; using a tapered microstrip transition, with high radiation losses; and even transitions for multilayer devices. Among all the transitions, the most versatile one is the through-wire transition, as microstrip and ESIW can be implemented in different layers and allows any feeding angle between the microstrip line and the ESIW. In this paper the through-wire transition has been properly validated at Ku- and Ka-bands. Moreover, a back-to-back transition has been accurately manufactured in Ka-band with measured insertion losses lower than 3.7 dB and return losses higher that 11.7 dB, concluding that the transition is not frequency dependent., This work was supported by the Coordinated Research and Development Project PID2019-103982RB, Subprojects C44 and C41, funded by the Ministerio de Ciencia e Innovación Agencia Estatal de Investigación/10.13039/501100011033. This work was also supported under grant TED2021-129196B-C44 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient Integral Equation Analysis of Arbitrarily Shaped Rectangular Waveguide Discontinuities Including Conducting Objects

  • Huescar de la Cruz, Antonio Manuel
  • Oliva Aparicio, Antonio
  • Quesada Pereira, Fernando D.
  • Alvarez Melcon, Alejandro
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] In this contribution, an Integral Equation (IE) formulation is proposed for the analysis of microwave circuits, based on the junction of two different rectangular waveguides coupled by an arbitrarily shaped zero thickness discontinuity. These rectangular waveguides could include an unlimited number of conducting elements with arbitrary shapes inside them. To solve the IE, the problem is split into two equivalent subproblems, each of which is related to a rectangular waveguide. Subsequently, an equivalent surface magnetic current density (M-ap(->)) defined at the discontinuity is used to connect the equivalent problems of each rectangular waveguide. In order to reduce the number of unknowns, the Lorenz gauge Green's functions of rectangular waveguides and their spatial derivatives are used to model the boundary conditions. In addition, the Ewald method has been employed to significantly speed up the evaluation of these rectangular waveguide Green's functions. Therefore, the use of this surface magnetic current density can reduce in some configurations the number of unknowns compared to an alternative Electric Field Integral Equation (EFIE). In addition, it allows a simpler analysis of some kind of discontinuities with respect to an EFIE method. Finally, the proposed technique has been validated by comparison with the results provided by commercial full-wave software tools such as Ansys HFSS and CST Studio Suite, showing good agreement and a better numerical efficiency., This work was supported in part by the Spanish Ministerio de Ciencia, Innovacion y Universidades and the Agencia Estatal de Investigacion, European Union Next Generation Funds through Research Projects under Grant PID2022-136590OB-C42: "Design and Development of New High-Performance Components for High-Frequency Communication Systems (NEWCOSYS)" and Grant PID2022-136590OB-C41: "Advancing on Waveguide Technologies for Near-Future Satellite Communication Equipment (ADWASAT)"; in part by the Antennas and Circuits for Efficient Wireless Sensor Networks Using Low-orbit Satellites (ARIELS), under Grant TED2021-129196B-C42; in part by the Technological Demonstrator of New Radio Links between Small Satellites and Earth Stations for Advanced Digital Applications (CHILD-SAT) under Grant TED2021-129196B-C41; and in part by the Fundacion Seneca, Agencia de Ciencia y Tecnologia de la Region de Murcia, Spain, through "Componentes radiantes y de filtrado de microondas para satelites emergentes" under Project 22076/PI/22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient Design of Large-Order Wide-Spurious-Free Dual-Band Evanescent-Mode Filters

  • Guglielmi, Marco
  • Bastioli, Simone
  • Snyder, Richard V.
  • Valencia-Sullca, Joaquín Francisco
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] The objective of this article is to discuss in detail the design procedure for large-order, wide-spurious-free dual-band filters. Two novel contributions are discussed in this context. A zero-volume diplexing junction and an approach to reduce the computational effort related to the tuning elements in the apertures. In this article, the design procedure is described in detail, going from an initial ideal inductive filter in rectangular waveguide to a final evanescent-mode filter structure that is suitable for manufacturing. In addition to theory, a filter prototype has been manufactured and measured showing excellent agreement with simulations, thereby fully validating both the filter structure that we propose and the complete design procedure. It is important to note that the final filter structure that we obtain is fully tunable so that the same structure, and the related design procedure, can effectively be scaled in terms of center frequency, filter order, and bandwidth. As a consequence, our contribution can indeed be used to design and manufacture a very large variety of dual-band filters, diplexers, and multiplexers., This work was supported in part by the R&D Projects PID2022-136590OB-C41 under Grant AEI/10.13039/501100011033/FEDER, UE; and in part by TED2021-129196B-C41 under Grant 10.13039/50110 0011033/Union Europea NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of Reconfigurable High-Frequency Devices Using Liquid Crystal in Substrate-Integrated Gap Waveguide Technology

  • Voronov, Aleksandr Andreyevich|||0009-0008-4508-4400
  • Bachiller Martin, Maria Carmen|||0000-0002-5518-5060
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Villacampa, Belén
[EN] This article presents the theoretical study, numerical simulation and fabrication of a phase shifter and a stub resonator for use in microstrip ridge gap waveguide (MRGW) technology, using a liquid crystal (LC) in the substrate as a reconfigurable material. The phase shifter and the stub resonator are filled with LC, and thanks to the LC's dielectric anisotropy properties, the phase shift and the resonance response can be easily controlled using an external electric or magnetic bias field. The phase shifter was designed to operate in the range of 10 to 20 GHz, and the resonator was designed to operate in the range of 7.8 to 8.8 GHz. The phase shifter's responses (including both phase shift and insertion losses), associated with both the parallel and perpendicular permittivity values of the LC, were computed and measured, and then the corresponding figure of merit (FoM) was extracted. The resonator's frequency responses, associated with both the LC's parallel and perpendicular permittivity, were computed. The resonator's frequency responses, which provided different polarization voltages, were measured and compared to the simulation results. All technological issues related to both prototypes are also discussed here. The good agreement between the simulation and measurement results confirm this technology as a viable approach to the practical implementation of these microwave reconfigurable devices., This work has been supported by Ministerio de Ciencia, Innovacion y Universidades (Spanish Government) through the R&D Projects PID2022-136590OB-C41 (under grant AEI/10.13039/501100011033/FEDER, UE) and TED2021-129196B-C41 (under grant 10.13039/501100011033/Union Europea NextGenerationEU/PRTR). The authors thank the financial support from Gobierno de Aragon-Fondo Social Europeo (E47-23R) and from Universidad de Zaragoza (UZ2023-CIE-01).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dielectricless Floating-Patch Antenna at 28 GHz Fed With an Empty Substrate Integrated Waveguide

  • Fernández-Berlanga, Marcos D
  • Herraiz, Dario
  • Alomainy, Akram
  • Belenguer Martínez, Ángel
  • David Herraiz|||0000-0002-3793-6078
[EN] This paper presents a novel dielectricless floating patch antenna structure fed with an empty substrate integrated waveguide (ESIW). The main premise is to eliminate the dielectric from the patch design, which is equivalent to have an air-dielectric and leads to the necessity of a proper 3D printed plastic support to fasten the patch in the air above the ESIW, which is used as the feeding waveguide through a slot under the aperture-coupled approximation. A single-element antenna prototype has been studied, designed, optimized and manufactured in order to achieve excellent bandwidth, directivity, gain and beamwidth performance at 28 GHz. The main advantages of this prototype are a low fabrication cost, low losses, a low profile, high integration capability and removal of bulky dielectric material. On the whole, this prototype is a new suitable solution to be used in millimeter-wave 5G applications and beyond compared to the state-of-the-art., This work was supported in part by Ministerio de Ciencia e Innovacion, Spanish Government, through the Subproject C44 of the Coordinated Research and Development Project funded by MCIN/AEI/10.13039/501100011033 under Project PID2019-103982RB and Project TED2021-129196B; and in part by the Funds NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Practical Method for Wideband Matching of Antennas Based on Filter Design Techniques

  • Cogollos, Santiago|||0000-0002-4189-2952
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Herraiz, Darío
  • Belenguer, Angel
[EN] This article shows several practical improvements on impedance matching methods based on modern filter network theory. New conclusions about matching have been obtained using the Bode-Fano limit, adding frequency-independent reactances (FIRs) to the formulation for the first time. Moreover, a matching limit can be obtained analytically before building the network, thus providing a performance limit in advance. A lumped network is obtained analytically as a first attempt with the reflection coefficient bounded between two limits with equiripple behavior for a maximum bandwidth. Then, this network model is modified by adding frequency-independent reactances (FIRs) to provide a better match even for asymmetric responses. The lumped network is converted into a distributed network where the dispersion of the lines is accounted for. The next improvement is the conversion into an electromagnetic model, where dispersion is also considered in the inverters modeled with irises. Three examples with increasing bandwidths are considered, and a manufactured prototype is measured to test the good behavior of the proposed matching method., This work was supported in part by the Ministerio de Ciencia, Innovacion y Universidades (Spanish Government) through Subprojects C41and C44 of the Research and Development under Project PID2022-136590OB (AEI/10.13039/501100011033/FEDER, UE) and ProjectTED2021-129196B (10.13039/501100011033/Union Europea NextGenerationEU/PRTR); in part by Conselleria de Educacion,Universidades y Empleo (Generalitat Valenciana) under Project CIPROM/2022/19; and in part by the European Social Fund ESF+.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design Methodology for the Practical Implementation of Magnetic Walls in Rectangular Waveguides Based on High-Impedance Surface Periodic Structures

  • Jorge-López, Alejandro|||0009-0004-9678-1813
  • Vague Cardona, José Joaquín|||0000-0001-5935-3116
  • Vidal Pantaleoni, Ana|||0000-0002-3853-6260
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This work presents a novel and comprehensive design methodology for the practical implementation of perfect magnetic conductors (PMCs) in rectangular waveguide (RW) technology, by taking advantage of high-impedance surface (HIS) periodic structures. The proposed design technique has been successfully validated on several standard-dimension RWs, confirming its applicability to the most common topologies. This work combines theoretical modeling and experimental validation, including the fabrication of two PMC prototypes adapted to standard RW geometries. The results demonstrate the effectiveness of the method for PMC design, its direct scalability for industrialization, and its potential for a wide range of microwave applications., This work was supported in part by the Ministerio de Ciencia, Innovacion y Universidades (Spanish Government) through the Research and Development Projects AEI/10.13039/501100011033/FEDER, UE and 10.13039/501100011033/Union Europea NextGenerationEU/PRTR under Grant PID2022-136590OB-C41 and Grant TED2021-129196-B; and in part by Conselleria de Educacion, Universidades y Empleo, Generalitat Valenciana under Project CIPROM/2022/19.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Practical Tapered Waveguide Design Using Bernstein Profile Approximations

  • Cogollos, Santiago|||0000-0002-4189-2952
  • Rubio Garrido, David|||0000-0002-9471-2011
  • Martínez Pérez, Jorge Daniel|||0000-0002-7119-3714
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This article describes a practical method to design waveguide tapers with smooth profile. A tapered waveguide, in general, is used to match different waveguide sections with the lowest possible reflection level. This method, based on Bernstein approximations, is used to achieve a reflection levels lower than the typical 20 dB in waveguide designs. The taper is designed with a prescribed length for bandwidths beyond the common frequency band of the end waveguide sections. An example of waveguide taper is compared with previous works in terms of reflection and curvature parameters. Finally, a prototype has been simulated and measured with excellent results., This work was supported by the Ministerio de Ciencia, Innovacion y Universidades (Spanish ¿ Government) through the Research and Development Projects under Grant PID2022-136590OB-C41, Grant AEI/10.13039/501100011033/FEDER, UE, Grant TED2021-129196B-C41, and Grant 10.13039/501100011033/Union¿ Europea NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of Distortion on the Multipactor Threshold for Dual Carrier Digitally Modulated Signals

  • Raúl Cercera
  • Vorotynskyy-Formagey, Vladyslav
  • Alcaide-Guillén, Carlos|||0000-0001-5772-9204
  • Rodríguez, Miguel
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Esteve, Laura
  • Monerris, Óscar
  • Ossorio-García, Javier
  • Smacchia, Davide
  • Miquel España, César
  • Raboso, David
[EN] Multipactor under digitally modulated signals is a field of growing interest in the space industry. The need to operate with higher powers arises from the industry demand to increase data throughput, enabled by advances in space-born amplifiers. However, this often leads to signal distortion, which may alter the multipactor threshold measured in laboratory conditions. This work aims to characterize, through the combination of experimental tests and numerical simulations, how distortion affects the multipactor performance of microwave devices excited by modulated signals. To this end, several dual carrier modulated signals with different distortion levels are digitally created, simulated, and tested on the same multipactor sample. When the simulation configuration matches the laboratory conditions, an excellent degree of accuracy is reported. However, simulations also demonstrate that the nonzero time response of the sensors may play a crucial role in determining the measured threshold, suggesting that laboratory detectors may struggle to detect short-lived events. Numerical predictions also reveal how the thresholds linked to these events are affected by the degree of signal distortion., This work was supported in part by the Ministerio de Ciencia e Innovacion, funded by Agencia Estatal de Investigacion (AEI) and Union Europea NextGenerationEU/Plan de Recuperacion Transformacion y Resiliencia (PRTR) under Research and Development Grant TED2021-129196B-C41; in part by the AEI through the Fondo Europeo de Desarrollo Regional (FEDER), Union Europea (UE), under Grant PID2022-136590OB-C41; and in part by the European Space Agency (ESA) through several Research and Development Activities, including the Project H2020-ESA-007 under Contract 4000126048/18/NL/AS.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Vertical and Compact ESICL-to-ESIW Transition for Multilayer Empty Substrate Integrated Circuits

  • David Herraiz|||0000-0002-3793-6078
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Herraiz, Darío
  • Belenguer, Angel
[EN] In this letter, a vertical transition from empty substrate integrated (ESI) coaxial line (ESICL) to ESI waveguide (ESIW) is presented. In contrast to in-line approaches, the proposed transition can connect both technologies with an independent substrate height, thus providing a compact structure. To transform the TEM mode into the TE10 mode, an aperture transversal to the propagation direction is used to couple the fields, and matching elements are added to improve the return loss level. A design guideline is presented and used to design two transitions. A back-to-back prototype is fabricated and measured to validate the proposed transition. The measured results show a return loss level better than 11.2 dB and an insertion loss lower than 1 dB, which makes the proposed transition promising for high-performance interconnection required in multilayer systems., This work was supported in part by MICIU/AEI/10.13039/501100011033, Spanish Government, under Project PID2022-136590OB, Project C41, and Project C44; in part by European Union Next Generation EU/PRTR under Project TED2021-129196B, Project C41, and Project C44; and in part by European Social Fund + (ESF+).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ka-band diplexer design based on half-mode groove gap waveguide

  • Marini, Stephan
  • Morales-Hernández, Aitor
  • Gimeno-Nieves, Encarnación
  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
  • Jorge-López, Alejandro|||0009-0004-9678-1813
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This paper shows the practical design of a Ka-band tuning-less diplexer in half-mode groove gap waveguide (HM-GGW) technology for multi-beam satellite applications. This new technology can be easily manufactured, since it lets the design of two separate metallic pieces: one for the cover with periodic pins, and another one for the half-groove gap waveguide structure. The proposed diplexer is composed of two bandpass HM-GGW filters, an H-plane T-junction and the corresponding transitions to the input/output WR28 rectangular ports. To illustrate how this technology can be applied, a prototype has been successfully fabricated, showing in-band measured return and insertion losses of 21 dB and 0.87 dB in the lower band, 16 dB and 0.86 dB in the upper band, and a good isolation level (better than 32.5 dB) in the whole operational frequency range., This work was supported by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe , through the Sub-Projects C43 and C41 of the Coordinated Projects PID2022-136590OB, and by the University of Alicante, Spain under the project GRE20-06A.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Fast and Accurate Coarse Method for Multipactor Threshold Prediction of RF Filters Under Modulated Signal Excitation

  • Alcaide-Guillén, Carlos|||0000-0001-5772-9204
  • Rodríguez, Miguel
  • Raúl Cercera
  • Morro, J. V.|||0000-0002-4699-6208
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Monerris, Óscar
  • Ossorio, Javier
  • Mata, Rafael
  • Smacchia, Davide
  • Miquel España, César
[EN] Multipactor is a key high-power effect limiting the system performance for onboard satellite hardware. Although modern particle simulators admit arbitrary geometries and signals as inputs, their practical use is often limited to continuous-wave (CW) excitations. Unfortunately, the multipactor analysis for input-modulated signals normally leads to prohibitively large CPU times, as signal lengths are very large compared to the electron population¿s evolution time. The Coarse Method is an elegant way of overcoming this limitation, providing a good estimate of the multipactor threshold in reduced CPU times. However, if the input signal is not preprocessed before being analyzed, the method is unable to account for the frequency dependence as it operates with electron dynamics information extracted at a single frequency, leading to biased predictions for narrowband samples as filters. This article proposes an extension to the original Coarse Method implementation by considering the sample response and the modulated signal spectral distribution to account for the frequency dependence. The resulting method is suitable for estimating the multipactor threshold of narrowband samples excited by modulated signals, while keeping the benefits in terms of simplicity, efficiency, and generality of the Coarse Method. The proposed approach is benchmarked against laboratory measurement results, as well as particle simulators and legacy Coarse Method predictions, revealing the advantages of the novel technique and its range of applications., This work was supported in part by the Ministerio de Ciencia e Innovacion, Union Europea (UE), under Research and Development Grant TED2021-129196B-C41/AEI/10.13039/501100011033/Union Europea NextGenerationEU/PRTR and Grant PID2022-136590OB-C41/AEI/10.13039/501100011033/FEDER; and in part by the European Space Agency (ESA) through several research and development activities, including the Project H2020-ESA-007 under Contract 4000126048/18/NL/AS.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of the insertion of corrugations in microwave filters for mitigation of the multipactor effect

  • Bonte, S.
  • Garcia, R.
  • Coves, Angela
  • Garcia, J.M.
  • San-Blas, A. A.
  • Sancho, M.
  • Sánchez-Soriano, M. A.
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] The multipactor effect is an electron avalanche type discharge, that poses a significant challenge in radiofrequency and microwave high-power devices operating under high-vacuum conditions, affecting their signal integrity and device performance. In this paper, we propose to apply a corrugated surface profile over the inner metallic walls in several microwave components, especially filters, to mitigate this undesired effect. Through numerical simulations, we demonstrate that the introduction of a corrugated surface over critical areas of the component significantly increases the multipactor power threshold. The corrugated profile effectively disrupts the conditions leading to the electron avalanche formation, thereby increasing the breakdown threshold level. We explore the influence of both the geometric parameters of the corrugated profile, and the critical region where it should be placed in the microwave component, providing insights into the optimal design considerations to alleviate this phenomenon. Our findings not only contribute to a broader understanding of the multipactor mitigation techniques in radiofrequency and microwave high-power components, but also offer valuable guidance for their application with a band-pass filter example, resulting in a substantial improvement of its multipactor power threshold after introducing the corrugated surface profile, while maintaining the electric performance of the originally designed component. Moreover, the proposed solution outstands other state-of-the-art multipactor reduction techniques, by avoiding the use of material coatings, micro-porous surfaces as well as non-standard waveguides, thus confirming very good prospects for its use with filtering components in high power demanding applications, such as satellite communication systems., This work has been funded by the Ministerio de Ciencia, Innovacion y Universidades (Spanish Government) through the Subprojects C41 and C43 of the R&D Projects PID2022-136590OB (under grant AEI/10.13039/501100011033/FEDER, UE) and TED2021-129196B (under grant 10.13039/501100011033/Union Europea NextGenerationEU/PRTR) . JMGB thanks the European Research Council grant ERC-2018-StG-802836 (AxScale project) , and the Lise Meitner program "In search of a new, light physics" of the Max Planck society.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design Procedure for Interdigital Waveguide Bandpass Filters Based on Flat Metallic Strips

  • García, R.
  • San-Blas, A. A.
  • Bonte, S.
  • Coves, A.
  • Sánchez-Soriano, M. A.
  • Guglielmi, Marco
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] In this work, we describe a new topology for interdigital bandpass filters implemented in waveguide technology. Compared to classical coaxial resonators, which are typically based on cylindrical metallic posts, the resonators that we propose are based on rectangular boxed cavities loaded with flat metallic strips of a finite thickness. The main advantages of the proposed topology are low-cost practical realization and manufacture simplicity. The design process, which is based on the classical circuit-based approach combined with an efficient segmentation of the component, uses the well-known Aggressive Space Mapping technique, with the aim of reducing the overall computation effort. In order to validate the new topology and the design procedure, interdigital bandpass filters of orders 3 and 5 operating at the S-band have been designed. For validation purposes, the results obtained are successfully compared to simulations provided by two different full-wave electromagnetic tools (i.e., Ansys HFSS and CST Studio Suite). Furthermore, a multipactor study has also been performed, with the aim of exploring the power handling capability of the proposed filters in view of possible space applications. Finally, the design of classical interdigital filters based on cylindrical posts is also discussed, with the aim of comparing both topologies regarding compactness, as well as in terms of their electrical and high-power performance., This work has been funded by the Ministerio de Ciencia, Innovacion y Universidades (Spanish Government) through the Subprojects C41 and C43 of the R&D Projects PID2022-136590OB (under grant AEI/10.13039/501100011033/FEDER, UE) and TED2021- 129196B (under Grant 10.13039/501100011033/Union Europea NextGenerationEU/PRTR), and in part by Conselleria de Educacion, Universidades y Empleo, Generalitat Valenciana, under Project CIAICO/2021/055.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Practical Determination of Passive Intermodulation From Modulated Signals in Satellite Applications

  • Smacchia, Davide
  • Raboso, David
  • Martínez-Mendoza, Mónica
  • Alcaide-Guillén, Carlos|||0000-0001-5772-9204
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] Passive intermodulation (PIM) measurements are typically conducted with a simplified test scenario composed of two radio frequency (RF) carrier tones operating in continuous wave (CW). However, satellite payloads tend to operate with a more complex scheme, where modulated signals are present at each transmission channel. This article aims at linking both PIM scenarios. A novel procedure is developed to obtain, from measured data obtained using two CW input tones, the spectral distribution and amplitude of a PIM contribution originated after exciting a nonlinear device with modulated signals. The technique determines the spectral distribution of the PIM term of interest from the spectrum of the input signals, and evaluates its amplitude from a recently formulated PIM power conservation rule. Moreover, an extensive PIM test campaign providing novel and valuable experimental data for the topic of PIM under modulated signal excitation has been carried out. The results obtained for a wide range of test scenarios exhibit a good agreement with theoretical predictions, thus providing a practical validation of the proposed technique., This work was supported in part by the Ministerio de Ciencia e Innovacion, MCIN/AEI/10.13039/501100011033,Spanish Government, through Research and Development under Grant PID2022-136590OB-C41 and Grant TED2021-129196B-C41; in part by the European Space Agency (ESA) through several Research and Development activities; and in part by the ESA-VSC European High Power RF Space Laboratory for its contribution to this work-Laboratory through European Regional Development Fund-A way of making Europe
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient Integral Equation Analysis of 3-D Rectangular Waveguide Microwave Circuits by Using Green s Functions Accelerated With the Ewald Method

  • Huescar de la Cruz, Antonio Manuel
  • Molina-Gomez, Celia
  • Quesada Pereira, Fernando Daniel
  • Álvarez Melcón, Alejandro
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] In this contribution, an electric field integral equation (EFIE) formulation is proposed, for the analysis of microwave circuits based on rectangular waveguides with an unlimited number of arbitrarily 3-D-shaped conducting elements. For this purpose, the Lorenz gauge rectangular waveguide Green¿s functions are used. Moreover, the Ewald method has been employed to significantly speed up the evaluation of these rectangular waveguide Green¿s functions. Strategies are also proposed to switch between different ways of calculating the Green¿s functions depending on the source-observation distance along the propagation direction. In addition, the method of moments (MoM) has been applied to solve the EFIE. Following the application of this technique, the impedance matrix resulting from the MoM has been divided into dynamic and static parts, thus reducing the computational time required to obtain the frequency response of practical 3-D microwave circuits by up to a factor of 3 compared with the traditional formulation., This work was supported in part by the Spanish Ministerio de Ciencia e Innovación in the framework of the research projects: Design and Development of New High-Performance Components for High-Frequency Communication Systems (NEWCOSYS) under Grant PID2022-136590OB-C42 and Advancing on Waveguide Technologies for Near-Future Satellite Communication Equipment (ADWASAT) under Grant PID2022-136590OB-C41; in part by the Agencia Estatal de Investigación, European Union Next Generation Funds in the projects Antennas and Circuits for Efficient Wireless Sensor Networks Using Low-Orbit Satellites (ARIELS) under Grant TED2021-129196B-C42 and Technological Demonstrator of New Radio Links Between Small Satellites and Earth Stations for Advanced Digital Applications (CHILD-SAT) under Grant TED2021-129196B-C41; and in part by the Fundación Séneca, Agencia de Ciencia y Tecnología de la Región de Murcia, Spain, through Componentes radiantes y de filtrado de microondas para satélites emergentes under Project 22076/PI/22
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Simple and Easily Connectable Transition from Empty Substrate-IntegratedWaveguide to a 3D Printed Rectangular Waveguide

  • Herraiz, Dario
  • Belenguer, Ángel
  • Fernández, Marcos
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] 3D printing is one of the most promising manufacturing methods in the most developed technological fields, including microwave hardware fabrication. On the other hand, the well-known manufacturing methods of planar substrate integrated circuits allow high-quality prototypes to be made at low cost and with mass production capabilities. The combination of both manufacturing methods, 2D or 2.5D (substrate integrated circuits) and 3D (3D printed structures), will allow us to take advantage of the main strengths of each technology and minimise disadvantages. In this article, for the first time, a transition structure between the Empty Substrate-Integrated Waveguide (ESIW) technology—a planar waveguide integrated on a printed circuit board—and a standard rectangular waveguide manufactured by 3D printing is proposed. This transition will make it possible to combine planar circuits with 3D structures, thus taking advantage of the benefits of both types of technologies. The fabricated prototype presents low losses (0.6 dB for the transmission coefficient and 15 dB for reflection coefficient), good electrical response (very flat), and simultaneously good mechanical stability and robustness to manufacturing and assembly errors. The proposed design for this transition piece is easily realisable for a wide range of affordable 3D printers. Repeatability is guaranteed and the proposed transition allows us to combine different SIC structures to 3D printed circuits. Hence, this transition will enable advancements in the fabrication of microwave devices, particularly with regard to satellite communications., This research was funded by the Ministerio de Ciencia e Innovación, Spanish Government, and the European Union NextGenerationEU/PRTR, through the Subprojects C44 and C41 of the Coordinated Project TED2021-129196B, under Grant MCIN/AEI/10.13039/501100011033. This work has been financed by European Social Fund + (ESF+).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Aerogel for Multipactor Mitigation in RF Passive Components of Satellite Payloads

  • Vague Cardona, José Joaquín|||0000-0001-5935-3116
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Reglero Mangada, Marta Sofía|||0000-0002-3811-843X
  • Goussetis, George
  • Kunes, Mark
  • Simões, Fernando
  • Bouzekri, Oilid
  • Mata-Sanz, Rafael
  • Raboso, David
[EN] We investigate the use of aerogel to fill passive resonant components, encountered in the high-power stage of satellite payloads as a multipactor mitigation strategy. The study focuses on the L-band coaxial resonators filled with aerogel powder. Simulated and experimental results are used for the low-power characterization of the dielectric properties of different aerogel compositions and granular distributions. Experimental investigations on the venting and outgassing features that provide guidance for the preparation and handling of the aerogel-filled components are reported. Simulation and experimental results involving high-power test campaigns indicate strong potential for improving the multipactor threshold using the proposed approach., This work was supported in part by European Space Agency under Contract 4000124877/18/NL/CRS and in part by the Ministerio de Ciencia e Innovacion (MICIN; Spanish Government) through Research and Development Projects PID2022-136590OB-C41 and TED2021-129196B-C41 under Grant MICIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Novel In-Line ESICL-to-ESIW Transition for High-Performance Empty Substrate Integrated Microwave Systems

  • David Herraiz|||0000-0002-3793-6078
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Herraiz, Dario
  • Belenguer, Ángel
[EN] This letter introduces a novel transition from empty substrate integrated coaxial line (ESICL) to empty substrate integrated waveguide (ESIW). Using a standard planar manufacturing process, this transition enables the development of a complete microwave system integrating various technologies. The design procedure is outlined, and two transitions from ESICL to ESIW for the Ku -and K -bands show simulated return loss better 30 dB in the entire frequency ranges. To validate feasibility, a back-to-back ESIW¿ESICL¿ESIW transition is fabricated and measured, yielding return losses higher than 19 dB and insertion losses lower than 0.45 dB., This work was supported in part by the Ministerio de Ciencia e Innovación, Spanish Government, under Research Projects PID2019-103982RB-C41 and PID2019- 103982RB-C44; and in part by MICIN/AEI/10.13039/501100011033 under Grant TED2021-129196B-C41 and Grant TED2021-129196B-C44.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-Directivity and low-loss directional couplers based on Empty Substrate Integrated Coaxial Line Technology

  • David Herraiz|||0000-0002-3793-6078
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Herraiz, Darío
  • de Dios, Juan J.
  • Fernández, Marcos D.
  • Belenguer, Ángel
[EN] High-directivity and low-loss directional couplers, based on Empty Substrate Integrated Coaxial Line (ESICL) technology, are presented in this article. The proposed coupled line direcional couplers, are based on combination of a high-isolation section, a tapering transition based on splines between the access lines and high-isolation sections, reduced-width coupled lines, and inclined arms. The design evolution has justified the combination and precise adjustment of these elements, proving to be a solution for enhancing directivity, reducing return losses, and attaining a more stable coupling coefficient. The use of the ESICL technology exhibits significant promise in terms of electrical performance, bandwidth, seamless integration with other planar circuits, and manufacturing simplicity. For comparison purposes, two directional couplers, with the same coupling coefficient but different operation frequencies, have been designed and manufactured. Additionally, a microstrip coupler has been designed and manufactured for comparison. The simulated and measured results clearly indicate that ESICL directional couplers outperform their microstrip counterparts in terms of losses and directivity, without the need for additional lumped elements or complex geometries., This work was supported in part by MCIN/AEI/10.13039/501100011033, Spanish Government, under the Coordinated Research Project, through Subprojects C41 and C44, under Grant PID2022-136590OB; in part by MCIN/AEI/10.13039/501100011033, Spanish Government; and in part by the European Union Next Generation European Union/Plan de Recuperación, Transformación y Resiliencia (EU/PRTR), under the Coordinated Research Project, through Subprojects C41 and C44, under Grant TED2021-129196B.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Practical Characterization of the Effect of the Transmission Carrier Phases in Passive Intermodulation

  • Smacchia, Davide
  • Monerris Belda, Óscar
  • Ossorio-García, Javier
  • Raboso García-Baquero, David
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Morro, J. V.|||0000-0002-4699-6208
  • Martínez-Mendoza, Mónica
[EN] The effect of the phase of the input carriers has been traditionally neglected in the characterization of passive intermodulation (PIM) since standard two-tone PIM tests seem to be unaffected by phase variations of the excitation signals. However, the phase of the input carriers can be of relevance in many practical applications. This article is aimed at filling this gap in the technical literature. First, the existing theory explaining why the phases do not affect the measured PIM contribution for a two-carrier excitation but can be of relevance for generic multicarrier scenarios is summarized. PIM measurements for complex signals composed of several carriers with varying phases are then reported, enabling the practical characterization of this effect for the first time. Experimental results of the test campaigns are fully aligned with theoretical predictions, thus allowing us to identify those PIM contributions that can be affected by the carrier phases and assess the expected variation range in their amplitude level., This work was supported in part by the Ministerio de Ciencia e Innovación, MCIN/AEI/10.13039/501100011033, Spanish Government, under Research and Development under Grant PID2022- 136590OB-C41 and Grant TED2021-129196B-C41; and in part by European Space Agency (ESA) through several Research and Development activities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dual-Reject-Band Filters With Resonant Apertures in Rectangular Waveguide

  • Valencia-Sullca, Joaquín Francisco
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Guglielmi, Marco
  • Bastioli, Simone
  • Snyder, Richard V.
[EN] This article describes a new family of dual-reject-band filters in rectangular waveguide that uses resonant apertures (RAs), and is suitable for narrow-band applications. Reject-band filters are commonly used to protect from interference in both communication and earth observation systems. The filter structure that we propose is based on a simple modification of the traditional narrow-band reject-band filter. We first describe the basic dual-reject-band filter structure, then we discuss the results of a detailed parametric analysis (all relevant data are provided in the Appendix) to be used as a basis for the filter design procedure. The design of several dual-reject-band filter prototypes is discussed in detail, including sensitivity to manufacturing errors and high-power analysis. Finally, simulations and measurements are also compared, showing very good agreement, thereby fully validating both the design procedure and the new filter topology that we propose., This work was supported in part by the Ministerio de Ciencia, Innovación y Universidades (Spanish Government) through the Research and Development Project PID2022-136590OB-C41 (FEDER, UE) under Grant AEI/10.13039/501100011033; and in part by the Project TED2021-129196B-C4 (Unión Europea NextGenerationEU/PRTR) under Grant 10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A New Family of Diplexers With Quarter-Wavelength Resonators and Frequency-Variant Couplings

  • Rubio Garrido, David|||0000-0002-9471-2011
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Guglielmi, Marco
[EN] In this article, we discuss a novel compact topology for waveguide diplexers, composed of inline rectangular waveguide filters based on ¿g/4 resonators and frequency-variant couplings (FVCs). The FVCs also generate transmission zeros (TZs), thereby significantly enhancing the filters¿ selectivity. The theory needed for the accurate synthesis and design of the waveguide structure is explained in detail. We also describe, step by step, the design of the two separate filters and the procedure to combine them into a diplexer. Finally, we discuss the measured results of a Ku-band diplexer prototype. The measured results are in very good agreement with theory, thereby validating both the new topology and the design procedure that we describe., This work was supported by the Ministerio de Ciencia, Innovación y Universidades, Spanish Government, under Project TED2021-129196B-C41 and Project PID2022-136590OB-C41 funded by MICIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Theoretical and Experimental Results for Multipactor Effect in Groove Gap Waveguide Bandpass Filters with Inductive Coupling Irises

  • Jorge-López, Alejandro|||0009-0004-9678-1813
  • Vague Cardona, José Joaquín|||0000-0001-5935-3116
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
  • Taroncher Calduch, Mariam|||0000-0001-9068-1169
  • Vidal Pantaleoni, Ana|||0000-0002-3853-6260
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Asensio, Irene
  • Coves Soler, Ángela
  • San Blas Oltra, Ángel Antonio
[EN] This article presents the theoretical study and experimental validation of the multipactor (MP) effect in bandpass filters implemented in groove gap waveguide (GGW) technology. Such filters are based on rectangular cavities and inductive coupling irises, whose optimized dimensions (widths and lengths) are fixed between rows of metal pins. For the effective design of the considered GGW filter, an equivalent counterpart in standard rectangular waveguide (RW) technology will be first studied, using very efficient tools for computing its electrical response and MP discharge breakdown levels. Two prototypes of the GGW and RW bandpass filters, designed to operate at 17.5 GHz (for Ka-band satellite downlink applications), are manufactured for validation and comparison purposes. Both of them are made of aluminium material, whose properties (in terms of secondary electron emission) have also been measured, as well as considered in the prediction of MP threshold levels using available software tools. Proceeding in this way, an outstanding matching between all simulated and experimental results of the MP effect has been achieved., This work was supported in part by the Ministerio de Ciencia, Innovacion y Universidades (Spanish Government) through the Subprojects C41 and C43 of the Research and Development Project PID2022-136590OB through Fondo Europeo de Desarrollo Regional (FEDER), Unión Europea (UE), under Grant AEI/10.13039/501100011033; in part by the Project TED2021-129196B through Unión Europea NextGenerationEU/Plan de Recuperación, Transformación y Resiliencia (PRTR) under Grant 10.13039/501100011033; and in part by the Conselleria de Educación, Universidades y Empleo, Generalitat Valenciana, under Project CIAICO/2021/055.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Genetically Based Algorithm to Improve Execution Speed in Multipactor Simulations in Parallel-Plate Waveguides

  • Raúl Cercera
  • Rodríguez, Miguel
  • Alcaide-Guillén, Carlos|||0000-0001-5772-9204
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Morro, J. V.|||0000-0002-4699-6208
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Miquel España, César
  • Raboso García-Baquero, David
[EN] This article presents an approach to enhance the convergence speed of Monte Carlo simulations for multipactor phenomena in parallel-plate geometries. Multipactor, a self-sustained electron discharge, may cause significantly harmful effects in electronic device operation. An adaptive genetic modification method is introduced to explore the parameter space of electron trajectories efficiently, leading to rapid identification of the critical combinations that induce population growth or decay. The proposed approach involves modifying key parameters, such as the initial phases and kinetic energies of individual particles, based on their performance in multipactor simulations. The reported results demonstrate a substantial improvement in convergence speed, achieving accurate results with fewer tracked particles. The adaptive genetic modification proves to be a promising technique for fast multipactor threshold predictions in parallel-plate configurations and has potential applications when analyzing electron-induced phenomena in a wide range of electronic systems., This work was partly supported by the Agencia Estatal de Innovación (AEI) of the Ministerio de Ciencia e Innovación (MCIN), Spanish Government MCIN/AEI/10.13039/501100011033, through Research and Development Projects PID2022-136590OB-C41 and TED2021-129196B-C41, by the European Space Agency (ESA) through Several Research and Development Activities, and by the European High Power RF Laboratory of the ESA and the Valencia Space Consortium (VSC) cofounded by the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient Design Procedure for Combline Bandpass Filters With Advanced Electrical Responses

  • Jamshidi Zarmehri, Hojjat
  • San Blas Oltra, Ángel Antonio
  • Neshati, Mohammad
  • Sharma, Abhishek
  • Coves Soler, Ángela
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] In this paper, a very efficient procedure for designing waveguide combline bandpass filters with an advanced electrical response is presented. The proposed technique is based on a segmentation strategy, which reduces the number of variables to be optimized by dividing the design process into simpler stages. The electrical response of an appropriate equivalent circuit model of the waveguide structure considered in each stage is used to generate the target curve needed in the optimization process. Moreover, the well- known Aggressive Space Mapping technique has been also implemented to improve the computational efficiency of the whole method. In order to validate the proposed design procedure, two high-order combline bandpass filters, with symmetric and asymmetric electrical responses including transmission zeros, have been successfully designed and simulated with full-wave analysis tools. Furthermore, as an experimental validation, a prototype of the symmetric filter has been manufactured, showing a good agreement between simulated and experimental data., This work was supported by the Ministerio de Ciencia e Innovación, Spanish Government, through the Subprojects C43 and C41 of the Coordinated Research and Development Projects PID2019-103982RB and TED2021-129196B, under Grant MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multipactor Breakdown Threshold Estimation Based on Circuital Models and Particle Simulations for Multicarrier Signals in RF Filters

  • Rodríguez, Miguel
  • Raúl Cercera
  • Alcaide-Guillén, Carlos|||0000-0001-5772-9204
  • Soto Pacheco, Pablo|||0000-0002-2734-620X
  • Morro, J. V.|||0000-0002-4699-6208
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • González-Santatecla, Pablo
  • Miquel España, César
  • Raboso, David
[EN] Multipactor is a harmful effect that may challenge the correct operation of satellite communication systems by limiting the system power-handling capability, and hence its overall performance. Therefore, the development of techniques for predicting the multipactor threshold is of great practical interest. For narrowband components, rough estimations can be obtained from experimental charts, normally resulting in conservative thresholds. More accurate predictions can be obtained with particle simulators, at the expense of a much higher computational effort. This study proposes an approach based on circuital models for swift and accurate multipactor threshold predictions, specifically addressing short-term discharges induced by multicarrier signals in narrowband samples. The use of reduced, but representative, electromagnetic (EM) models of the critical gap region is discussed in detail. Through the use of these models, it is possible to avoid simulating the complete structure, increasing the computational efficiency and enabling the fulfillment of the power requirements at early design stages. The proposed technique is validated through commercial particle simulators, showcasing its efficacy, efficiency, and key benefits., This work was supported in part by the Ministerio de Ciencia e Innovacion, MCIN AEI/10.13039/501100011033, Spanish Government, under Research and Development Grant PID2022-136590OB-C41 and Grant TED2021-129196B-C41; and in part by the European Space Agency (ESA) through several research and development activities.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Compact Ka-Band Triplexer based on Half-Mode Groove Gap Waveguide Technology

  • Marini, Stephan
  • Ferrando-Rocher, Miguel
  • Soto Pacheco, Pablo
  • Gimeno, Encarnación
  • Seller-Rueda, Antonio
  • Boria Esbert, Vicente Enrique
  • Gimeno, Encarnación|||/items/0eec6633-0f09-4be6-8931-f30c1a64fbcb
  • Marini, Stephan|||/items/f9c8c8d4-d768-49bf-aae8-bb53041bd8b4
  • Seller-Rueda, Antonio|||/items/13a175cb-cdb3-4959-bfc2-0085f56481ef
In this work, a compact Ka-band triplexer based on half-mode groove gap waveguide (HM-GGW) technology is proposed. The triplexer has a manifold herringbone config-uration, where three bandpass HM-GGW filters are directly coupled to the common shorted line without the use of stubs, and vertical transitions to the input/output rectangular ports are also included. Three channels centred at 27.65, 29 and 30 GHz, with relative bandwidths from 1.45% to 2.06%, are combined. In order to validate this solution, a prototype has been successfully designed and fabricated, demonstrating that HM-GGW is an attractive technology for implementing complex microwave components for high-frequency applications.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Study of the insertion of corrugations in microwave filters for mitigation of the multipactor effect

  • Bonte, Sarah
  • García Jiménez, Raúl
  • Coves Soler, Ángela María
  • García Barceló, Jose María
  • San Blas Oltra, Ángel Antonio
  • Sancho, M.
  • Sánchez-Soriano, Miguel Ángel|||/items/b47af293-b2ab-4567-88b8-66decd71861b
  • Boria Esbert, Vicente Enrique
  • García Jiménez, Raúl|||/items/b11577ee-df95-407c-b9ec-3e863e622eea
The multipactor effect is an electron avalanche type discharge, that poses a significant challenge in radiofrequency and microwave high-power devices operating under high-vacuum conditions, affecting their signal integrity and device performance. In this paper, we propose to apply a corrugated surface profile over the inner metallic walls in several microwave components, especially filters, to mitigate this undesired effect. Through numerical simulations, we demonstrate that the introduction of a corrugated surface over critical areas of the component significantly increases the multipactor power threshold. The corrugated profile effectively disrupts the conditions leading to the electron avalanche formation, thereby increasing the breakdown threshold level. We explore the influence of both the geometric parameters of the corrugated profile, and the critical region where it should be placed in the microwave component, providing insights into the optimal design considerations to alleviate this phenomenon. Our findings not only contribute to a broader understanding of the multipactor mitigation techniques in radiofrequency and microwave high-power components, but also offer valuable guidance for their application with a band-pass filter example, resulting in a substantial improvement of its multipactor power threshold after introducing the corrugated surface profile, while maintaining the electric performance of the originally designed component. Moreover, the proposed solution outstands other state-of-the-art multipactor reduction techniques, by avoiding the use of material coatings, micro-porous surfaces as well as non-standard waveguides, thus confirming very good prospects for its use with filtering components in high power demanding applications, such as satellite communication systems.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Design Procedure for Interdigital Waveguide Bandpass Filters Based on Flat Metallic Strips

  • García Jiménez, Raúl
  • San Blas Oltra, Ángel Antonio
  • Bonte, Sarah
  • Coves Soler, Ángela María
  • Sánchez-Soriano, Miguel Ángel
  • Guglielmi, Marco
  • Boria Esbert, Vicente Enrique
  • Sánchez-Soriano, Miguel Ángel|||/items/b47af293-b2ab-4567-88b8-66decd71861b
  • García Jiménez, Raúl|||/items/b11577ee-df95-407c-b9ec-3e863e622eea
In this work, we describe a new topology for interdigital bandpass filters implemented in waveguide technology. Compared to classical coaxial resonators, which are typically based on cylindrical metallic posts, the resonators that we propose are based on rectangular boxed cavities loaded with flat metallic strips of a finite thickness. The main advantages of the proposed topology are low-cost practical realization and manufacture simplicity. The design process, which is based on the classical circuit-based approach combined with an efficient segmentation of the component, uses the well-known Aggressive Space Mapping technique, with the aim of reducing the overall computation effort. In order to validate the new topology and the design procedure, interdigital bandpass filters of orders 3 and 5 operating at the S-band have been designed. For validation purposes, the results obtained are successfully compared to simulations provided by two different full-wave electromagnetic tools (i.e., Ansys HFSS and CST Studio Suite). Furthermore, a multipactor study has also been performed, with the aim of exploring the power handling capability of the proposed filters in view of possible space applications. Finally, the design of classical interdigital filters based on cylindrical posts is also discussed, with the aim of comparing both topologies regarding compactness, as well as in terms of their electrical and high-power performance.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Low-Loss Periodically Air-Filled Substrate Integrated Waveguide (SIW) Band-Pass Filters

  • García Jiménez, Raúl
  • Coves Soler, Ángela María
  • Herraiz, Darío
  • San Blas Oltra, Ángel Antonio
  • Bozzi, Maurizio
  • García Jiménez, Raúl|||/items/b11577ee-df95-407c-b9ec-3e863e622eea
The electrical response of low-frequency band-pass filters based on periodic substrate integrated waveguide (SIW) technology typically shows permitted and forbidden frequency bands. Therefore, this type of filters can be designed using a conceptually very simple and efficient procedure based exclusively on the study of the dispersion properties of the periodic structure. In this paper, we go a step further with the design of a periodically air-filled SIW band-pass filter in which part of the dielectric substrate is removed to reduce insertion losses, and whose unit cell parameters, which are directly related to the center frequency ( fc ) and bandwidth (BW) of the first passband, and also to the first stopband or bandgap (BG) of the structure, have been appropriately selected for filtering purposes, thus providing some useful design rules. Furthermore, we apply the concept of glide symmetry for achieving a much larger fractional bandwidth (FBW) than that obtained in conventional air-filled SIW filters found in the technical literature. Finite implementations of both periodic structures with and without glide symmetry have been analyzed, showing their filtering response for validation purposes. Additionally, to overcome the matching level restrictions in the resulting air-filled periodic SIWs, a microstrip-to-SIW transition including a novel coupling iris is proposed. A prototype of the proposed air-filled glide-symmetric periodic SIW filter has been manufactured and experimentally validated, illustrating the potential of this technique to obtain large FBWs that can not be achieved in conventional air-filled SIW filters. The proposed filter proves to be a good candidate for millimeter wave applications.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of reconfigurable high-frequency devices using liquid crystal in substrate-integrated gap waveguide technology

  • Voronov, Aleksandr Andreyevich
  • Bachiller, Carmen
  • Villacampa, Belén
  • Boria, Vicente E.
This article belongs to the Special Issue Synthesis of Liquid Crystals and Cellulose Derivatives Liquid Crystalline Phases: Recent Advances., This article presents the theoretical study, numerical simulation and fabrication of a phase shifter and a stub resonator for use in microstrip ridge gap waveguide (MRGW) technology, using a liquid crystal (LC) in the substrate as a reconfigurable material. The phase shifter and the stub resonator are filled with LC, and thanks to the LC’s dielectric anisotropy properties, the phase shift and the resonance response can be easily controlled using an external electric or magnetic bias field. The phase shifter was designed to operate in the range of 10 to 20 GHz, and the resonator was designed to operate in the range of 7.8 to 8.8 GHz. The phase shifter’s responses (including both phase shift and insertion losses), associated with both the parallel and perpendicular permittivity values of the LC, were computed and measured, and then the corresponding figure of merit (FoM) was extracted. The resonator’s frequency responses, associated with both the LC’s parallel and perpendicular permittivity, were computed. The resonator’s frequency responses, which provided different polarization voltages, were measured and compared to the simulation results. All technological issues related to both prototypes are also discussed here. The good agreement between the simulation and measurement results confirm this technology as a viable approach to the practical implementation of these microwave reconfigurable devices., This work has been supported by Ministerio de Ciencia, Innovación y Universidades (Spanish Government) through the R&D Projects PID2022-136590OB-C41 (under grant AEI/10.13039/501100011033/FEDER, UE) and TED2021-129196B-C41 (under grant 10.13039/501100011033/Unión Europea NextGenerationEU/PRTR). The authors thank the financial support from Gobierno de Aragón-Fondo Social Europeo (E47-23R) and from Universidad de Zaragoza (UZ2023-CIE-01)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Practical Tapered Waveguide Design Using Bernstein Profile Approximations

  • Cogollos, Santiago
  • Rubio Garrido, David
  • Martínez, Jorge D.
  • Boria, Vicente E.
This article describes a practical method to design waveguide tapers with smooth profile. A tapered waveguide, in general, is used to match different waveguide sections with the lowest possible reflection level. This method, based on Bernstein approximations, is used to achieve a reflection levels lower than the typical 20 dB in waveguide designs. The taper is designed with a prescribed length for bandwidths beyond the common frequency band of the end waveguide sections. An example of waveguide taper is compared with previous works in terms of reflection and curvature parameters. Finally, a prototype has been simulated and measured with excellent results., This work was supported by the Ministerio de Ciencia, Innovacion y Universidades (Spanish Government) through the Research and Development Projects under Grant PID2022-136590OB-C41, Grant AEI/10.13039/501100011033/FEDER, UE, Grant TED2021-129196B-C41, and Grant 10.13039/501100011033/Union Europea NextGenerationEU/PRTR, Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Development of reconfigurable high-frequency devices using liquid crystal in substrate-integrated gap waveguide technology

  • Voronov, Aleksandr Andreyevich
  • Bachiller, Carmen
  • Villacampa, Belén
  • Boria, Vicente E.
This article presents the theoretical study, numerical simulation and fabrication of a phase shifter and a stub resonator for use in microstrip ridge gap waveguide (MRGW) technology, using a liquid crystal (LC) in the substrate as a reconfigurable material. The phase shifter and the stub resonator are filled with LC, and thanks to the LC’s dielectric anisotropy properties, the phase shift and the resonance response can be easily controlled using an external electric or magnetic bias field. The phase shifter was designed to operate in the range of 10 to 20 GHz, and the resonator was designed to operate in the range of 7.8 to 8.8 GHz. The phase shifter’s responses (including both phase shift and insertion losses), associated with both the parallel and perpendicular permittivity values of the LC, were computed and measured, and then the corresponding figure of merit (FoM) was extracted. The resonator’s frequency responses, associated with both the LC’s parallel and perpendicular permittivity, were computed. The resonator’s frequency responses, which provided different polarization voltages, were measured and compared to the simulation results. All technological issues related to both prototypes are also discussed here. The good agreement between the simulation and measurement results confirm this technology as a viable approach to the practical implementation of these microwave reconfigurable devices.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Compact wideband groove gap waveguide bandpass filters manufactured with 3D printing and CNC milling techniques

  • Máximo-Gutierrez, Clara
  • Hinojosa, Juan
  • Abad, José
  • Urbina Yeregui, Antonio
  • Álvarez-Melcon, Alejandro
This paper presents for the first time a compact wideband bandpass filter in groove gap waveguide (GGW) technology. The structure is obtained by including metallic pins along the central part of the GGW bottom plate according to an n-order Chebyshev stepped impedance synthesis method. The bandpass response is achieved by combining the high-pass characteristic of the GGW and the low-pass behavior of the metallic pins, which act as impedance inverters. This simple structure together with the rigorous design technique allows for a reduction in the manufacturing complexity for the realization of high-performance filters. These capabilities are verified by designing a fifth-order GGW Chebyshev bandpass filter with a bandwidth BW = 3.7 GHz and return loss RL = 20 dB in the frequency range of the WR-75 standard, and by implementing it using computer numerical control (CNC) machining and three-dimensional (3D) printing techniques. Three prototypes have been manufactured: one using a computer numerical control (CNC) milling machine and two others by means of a stereolithography-based 3D printer and a photopolymer resin. One of the two resin-based prototypes has been metallized from a silver vacuum thermal evaporation deposition technique, while for the other a spray coating system has been used. The three prototypes have shown a good agreement between the measured and simulated S-parameters, with insertion losses better than IL = 1.2 dB. Reduced size and high-performance frequency responses with respect to other GGW bandpass filters were obtained. These wideband GGW filter prototypes could have a great potential for future emerging satellite communications systems., The authors gratefully acknowledge financial support from Agencia Estatal de Investigación (AEI) and Fundación Séneca Región de Murcia of Spain for their financial support (grants no.: PID2019-103982RB-C42/AEI/10.13039/501100011033, TED2021-129196B-C42 and 22076/PI/22).