Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Bottom-up synthesized MoS 2 interfacing polymer carbon nanodots with electrocatalytic activity for hydrogen evolution

  • Kagkoura, Antonia
  • Canton-Vitoria, Rubén
  • Vallan, Lorenzo
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
  • Tagmatarchis, Nikos
5 Figuras, 1 Esquema, 1 Tabla .-- Información suplementaria disponible en la página web del editor., The preparation of MoS 2 ‐polymer carbon nanodot (MoS 2 ‐PCND) hybrid material was accomplished by employing an easy and fast bottom‐up synthetic approach. Specifically, MoS 2 ‐PCND was realized by the thermal decomposition of ammonium tetrathiomolybdate and the in‐situ complexation of Mo with carboxylic acid units present in the surface of PCNDs. The newly prepared hybrid material was comprehensively characterized by spectroscopic, thermal and electron microscopy imaging means. The electrocatalytic activity of MoS 2 ‐PCND was examined against the hydrogen evolution reaction (HER) and compared with that attributed to the hybrid material prepared by a top‐down approach, namely with MoS 2 ‐PCND(exf‐fun), in which MoS 2 was firstly exfoliated and then covalently functionalized with PCNDs. The MoS 2 ‐PCND hybrid material showed superior electrocatalytic activity against HER with low Tafel slope value and excellent electrocatalytic stability, with an onset potential at ‐0.16 V vs RHE. The superior catalytic performance of MoS 2 ‐PCND was rationalized by considering the catalytic active sites of MoS 2 , the effective charge/energy‐transfer phenomena from PCNDs to MoS 2 and the synergetic effect between MoS 2 and PCNDs within the hybrid material., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 642742. Support of this work by the project “Advanced Materials and Devices” (MIS 5002409) which is implemented under the “Action for the Strategic Development on the Research and Technological Sector”, which is implemented under the “Reinforcement of the Research and Innovation Infrastructures”, funded by the Operational Program "Competitiveness, Entrepreneurship and Innovation" (NSRF 2014-2020) and co-financed by Ministry of Development and Investments, Greece, and the European Union (European Regional Development Fund) is also acknowledged. A.M.B. and W.K.M. acknowledge Spanish MINEICO (project grant ENE2016-79282-C5-1-R, AEI/FEDER, UE) and the Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER, UE). The SR-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. The SR-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE) from the Government of Aragon and the European Social Fund under the project “Construyendo Europa desde Aragon” 2014-2020 (grant number E13_17R) and from the European Union H2020 programs “ESTEEM3” (823717) and under the “Graphene Flagship” CORE2 project grant agreement No 785219., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Anisotropic Au-ZnO photocatalyst for the visible-light expanded oxidation of n-hexane

  • Bueno-Alejo, Carlos
  • Graus, Javier
  • Arenal, Raúl
  • Lafuente, Marta
  • Bottega‐Pergher, Bruno
  • Hueso, José L.
In this work we present a novel metal-semiconductor heterostructure that contains triangular and prism-shaped plasmonic gold nanostructures directly synthesized and assembled onto ZnO nanostructures. Spatially-resolved (SR) high-resolution electron energy loss spectroscopy (EELS) at the local (sub-nanometer scale) level confirmed the field enhancement of the local electromagnetic fields in the surroundings of the triangular and prism-shaped Au nanostructures and in the interfacial junction between Au and ZnO. Different LED excitation sources have been systematically selected in the whole UV–vis-NIR range to evaluate the photocatalytic response of the Au-ZnO heterostructures towards the oxidation of n-hexane, selected as a model VOC present in indoor environments. The Au-ZnO exhibits visible expanded photo-response with the more energetic interband and intraband electrons and the higher LED irradiation wavelengths and it is able to outperform its ZnO plain counterpart., Financial support from the European Research Council (ERC Advanced Grant CADENCE number 742684) is gratefully acknowledged. We also acknowledge the support from CIBER-BBN and MINECO (Spain) with project CTQ2016-79419-R. R.A. acknowledges funding from the Spanish Ministerio de Ciencia, Innovación y Universidades (project grant MAT2016-79776-P (AEI/FEDER, UE)) and from the European Union H2020 program “ESTEEM3” (823717)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A detailed investigation of the onion structure of exchanged coupled magnetic Fe3-δO4@CoFe2O4@Fe3-δO4 nanoparticles

  • Sartori, Kevin
  • Musat, Anamaria
  • Choueikani, Fadi
  • Grenèche, Jean Marc
  • Hettler, Simon
  • Bencok, Peter
  • Begin-Colin, Sylvie
  • Steadman, Paul
  • Arenal, Raúl
  • Pichon, Benoit P.
Nanoparticles that combine several magnetic phases offer wide perspectives for cutting edge applications because of the high modularity of their magnetic properties. Besides the addition of the magnetic characteristics intrinsic to each phase, the interface that results from core–shell and, further, from onion structures leads to synergistic properties such as magnetic exchange coupling. Such a phenomenon is of high interest to overcome the superparamagnetic limit of iron oxide nanoparticles which hampers potential applications such as data storage or sensors. In this manuscript, we report on the design of nanoparticles with an onion-like structure which has been scarcely reported yet. These nanoparticles consist of a Fe3−δO4 core covered by a first shell of CoFe2O4 and a second shell of Fe3−δO4, e.g., a Fe3−δO4@CoFe2O4@Fe3−δO4 onion-like structure. They were synthesized through a multistep seed-mediated growth approach which consists consists in performing three successive thermal decomposition of metal complexes in a high-boiling-point solvent (about 300 °C). Although TEM micrographs clearly show the growth of each shell from the iron oxide core, core sizes and shell thicknesses markedly differ from what is suggested by the size increasing. We investigated very precisely the structure of nanoparticles in performing high resolution (scanning) TEM imaging and geometrical phase analysis (GPA). The chemical composition and spatial distribution of atoms were studied by electron energy loss spectroscopy (EELS) mapping and spectroscopy. The chemical environment and oxidation state of cations were investigated by 57Fe Mössbauer spectrometry, soft X-ray absorption spectroscopy (XAS) and X-ray magnetic circular dichroism (XMCD). The combination of these techniques allowed us to estimate the increase of Fe2+ content in the iron oxide core of the core@shell structure and the increase of the cobalt ferrite shell thickness in the core@shell@shell one, whereas the iron oxide shell appears to be much thinner than expected. Thus, the modification of the chemical composition as well as the size of the Fe3−δO4 core and the thickness of the cobalt ferrite shell have a high impact on the magnetic properties. Furthermore, the growth of the iron oxide shell also markedly modifies the magnetic properties of the core–shell nanoparticles, thus demonstrating the high potential of onion-like nanoparticles to accurately tune the magnetic properties of nanoparticles according to the desired applications., K.S. was supported by a PhD grant from the French Agence Nationale de la Recherche (ANR) under the reference ANR11-LABX-0058-NIE within the Investissement d’Avenir program ANR-10-IDEX-0002-02 and SOLEIL synchrotron/Laboratoire Léon Brillouin fellowship. The authors are grateful to SOLEIL synchrotron light source for providing the access to DEIMOS beamline and to DIAMOND synchrotron light source for providing access to BLADE beamline. HRSTEM and STEM-EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. S.H. is grateful to DFG (HE 7675/1-1). R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) and the MICINN through project grants MAT2016-79776-P (AEI/FEDER, UE) and PID2019-104739GB-100/AEI/10.13039/501100011033 as well as from the European Union H2020 program “ESTEEM3” (823717)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Comparative image simulations for phase-plate transmission electron microscopy

  • Hettler, Simon
  • Arenal, Raúl
Numerous physical phase plates (PP) for phase-contrast enhancement in transmission electron microscopy (TEM) have been proposed and studied with the hole-free or Volta PP having a high impact and interest in recent years. This study is concerned with comparative TEM image simulations considering realistic descriptions of various PP approaches and samples from three different fields of application covering a large range of object sizes. The simulated images provide an illustrative characterization of the typical image appearance and common artifacts of the different PPs and the influence of simulation parameters especially important for PP simulations. A quantitative contrast analysis shows the superior phase-shifting properties of the hole-free phase plate for biological applications and the benefits of adjustable phase plates. The application of PPs in high-resolution TEM imaging, especially of weak-phase objects such as (atomically thin) 2D materials, is shown to increase image interpretability. The software with graphical user interface written and used for the presented simulations is available for free usage., S.H. and R.A. acknowledge funding by German Research Foundation (DFG project He 7675/1-1) and by the Spanish MICINN (PID2019-104739GB-100/AEI/10.13039/501100011033) and from the European Union H2020 program “ESTEEM3” (Grant number 823717) and European Union H2020 “Graphene Flagship” CORE 3 (Grant number 881603)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Controlled chemical functionalization toward 3D-2D carbon nanohorn-MoS2 heterostructures with enhanced electrocatalytic activity for protons reduction

  • Kagkoura, Antonia
  • Arenal, Raúl
  • Tagmatarchis, Nikos
The realization of novel heterostructures arising from the combination of nanomaterials is an effective way to modify their physicochemical and electrocatalytic properties, giving them enhanced characteristics stemming from their individual constituents. Interfacing carbon nanohorns (CNHs) possessing high porosity, large specific surface area, and good electrical conductivity, with MoS2 owning multiple electrocatalytic active sites but lacking significant conductivity, robust interactions, and effective structure, can be a strategy to boost the electrocatalytic reduction of protons to molecular hydrogen. Herein, in a stepwise approach, complementary functional groups are covalently introduced at the conical tips and sidewalls of CNHs, along with the basal plane of MoS2, en route the construction of 3D-2D CNH-MoS2 heterostructures. The increased MoS2 loading onto CNHs, improving and facilitating charge delocalization and transfer in neighboring CNHs, along with the plethora of active sites, results in excellent electrocatalytic activity for protons reduction, same as that of commercial Pt/C. Minute overpotential is registered, low Tafel slope and small charge-transfer resistance for electrocatalyzing the evolution of hydrogen from the newly prepared heterostructure of 0.029 V, 71 mV dec−1, and 34.5 Ω, respectively. Furthermore, the stability of the 3D-2D CNH-MoS2 heterostructure is validated after performing 10 000 ongoing electrocatalytic cycles., This research was co-financed by Greece and the European Union (European Social Fund) through the Operational Programme “Human Resources Development, Education and Lifelong Learning” in the context of the project “Reinforcement of Postdoctoral Researchers—2nd Cycle” (MIS 5033021), implemented by the State Scholarships Foundation (IKY). R.A. gratefully acknowledges the support from the Spanish MICINN (PID2019-104739GB-100/AEI/10.13039/501100011033), Government of Aragon (project DGA E13-20R (FEDER, EU)) and from the European Union H2020 programs “ESTEEM3” (Grant number 823717) and Graphene Flagship (881603). Partial financial support from the project “National Infrastructure in Nanotechnology, Advanced Materials and Micro-/Nanoelectronics” (MIS 5002772), which was implemented under the Action “Reinforcement of the Research and Innovation Infrastructures”, funded by the Operational Program “Competitiveness, Entrepreneurship and Innovation” (NSRF 2014–2020), Ministry of Development and Investments, and co-financed by Greece and the European Union (European Regional Development Fund) was also acknowledged. TEM and XPS measurements were performed at the Laboratorio de Microscopias Avanzadas (LMA) – Universidad de Zaragoza (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Shelling with MoS2: Functional CuS@MoS2 hybrids as electrocatalysts for the oxygen reduction and hydrogen evolution reactions

  • Bar-Hen, Avraham
  • Bar-Ziv, Ronen
  • Ohaion-Raz, Tsion
  • Mizrahi, Amir
  • Hettler, Simon
  • Arenal, Raúl
  • Bar-Sadan, Maya
The development of noble-metal free electrocatalysts is of high importance for clean energy conversion applications. MoS2 has been considered as a promising low-cost catalyst for the hydrogen evolution reaction (HER), however its activity is limited by poor conductivity and low abundance of active sites. Moreover, its suitability as an effective catalyst for other reactions, in particular the oxygen reduction reaction (ORR), was hardly explored to date. Herein, we show hybrid nanostructures of shelled CuS particles with MoS2 layers, which produces several outcomes: The MoS2 shell is strained and defective, and charge transfer from the core to MoS2 occurs, enabling activation of the basal plane of MoS2. Changing the feed ratio of the precursors led to control over morphology, such that the wrapping of the cores with the shell was continuously varied and characterized. We found an optimal hybrid structure, which provided high electrochemical active surface area and fast charge transfer kinetics, leading to improved activity not only towards HER (overpotential of 225 mV at 10 mA cm−2), but also for the sluggish ORR (onset potential 0.87 V vs RHE)., This research was supported by the United States – Israel Binational Science Foundation (BSF), Jerusalem, Israel and the United States National Science Foundation (NSF) grant 2017642, and partly from the Israeli Atomic Energy Commission–Prof. A. Pazy joint foundation. The HRSTEM and EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. S.H. acknowledges funding by German Research Foundation (HE 7675/1-1). R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) and the MICINN through project grants MAT2016-79776-P (AEI/FEDER, UE) and PID2019-104739GB-I00/AEI/10.13039/501100011033, as well as from the European Union H2020 programs “Graphene Flagship” (881603) and “ESTEEM3” (823717)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Single-crystalline body centered FeCo nano-octopods: From one-pot chemical growth to a complex 3D magnetic configuration

  • Garnero, Cyril
  • Pierrot, Alexandre
  • Gatel, Christophe
  • Marcelot, Cécile
  • Arenal, Raúl
  • Florea, Ileana
  • Bernand-Mantel, Anne
  • Soulantica, Katerina
  • Poveda, Patrick
  • Chaudret, Bruno
  • Blon, Thomas
  • Lacroix, Lise-Marie
Single crystalline magnetic FeCo nanostars were prepared using an organometallic approach under mild conditions. The fine-tuning of the experimental conditions allowed the direct synthesis of these nano-octopods with body-centered cubic (bcc) structure through a one-pot reaction, contrarily to the seed-mediated growth classically used. The FeCo nanostars consist of 8 tetrahedrons exposing {311} facets, as revealed by high resolution transmission electron microscopy (HRTEM) imaging and electron tomography (ET), and exhibit a high magnetization comparable with the bulk one (Ms = 235 A·m2·kg–1). Complex 3D spin configurations resulting from the competition between dipolar and exchange interactions are revealed by electron holography. This spin structures are stabilized by the high aspect ratio tetrahedral branches of the nanostars, as confirmed by micromagnetic simulations. This illustrates how magnetic properties can be significantly tuned by nanoscale shape control., This work was performed in the frame of TOURS 2015, a project supported by the French Programme de l’économie numérique des Investissements d’Avenir. T. Blon and A. Pierrot thank the Agence Nationale de la Recherche (France) for financial support (Contract No. ANR-14-CE07-0025-01 DENSAR). The authors gratefully acknowledge the International Associated Laboratory (LIA)-M2OZART for financial support. Some of the HRSTEM and EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. R. Arenal gratefully acknowledges the support from the Spanish MICINN (PID2019-104739GB-100/AEI/10.13039/501100011033) and European Union H2020 program “ESTEEM3” (823717)., Peer reviewed