Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 262
Encontrada(s) 3 página(s)

Docta Complutense
Publication Capítulo o parte de un libro (BookPart)

Pigment ratios of the mediterranean bryophyte pleurochaete squarrosa respond to simulated nitrogen deposition

  • Ochoa Hueso, Raúl
  • Paradela, Cristina
  • Pérez Corona, María Esther
  • Manrique Reol, Esteban
Nitrogen (N) deposition alters ecosystem structure and functioning. To study potential impacts on Mediterranean ecosystems, we designed a field fertilization experiment where NH4NO3 was added at four rates (0, 10, 20 and 50 kg N ha−1 year−1). The terricolous moss Pleurochaete squarrosa was sampled and pigments extracted in spring-autumn 2008 and spring 2009. Simulated N deposition increased lutein and VAZ pigments to chlorophyll ratios in autumn 2008; β-carotene to chlorophyll ratio was reduced in spring 2009; (neoxantin + lutein) to β-carotene increased with N supply and this was explained as higher investment in light-harvesting complexes than in reaction centres. Response of carotene to chlorophylls and of (neoxantin + lutein)/β-carotene to N enrichment were only evident when soil NH4 and Mn, respectively, were used as covariates. Thus, covariance analyses are highly recommended to detect N fertilization effects on terricolous species when field experiments are set up in highly heterogeneous environments.
Docta Complutense
Publication Capítulo o parte de un libro (BookPart)

Madrid y Viena ante la sucesión de Carlos II: Mariana de Neoburgo, los condes de Harrach y la crisis del partido alemán en la corte española (1697-1700)

  • López Anguita, José Antonio
Este capítulo analiza la agencia política de Mariana de Neoburgo (1667-1740), segunda esposa de Carlos II, al servicio de la corte de Viena en el contexto de la crisis sucesoria de la Monarquía Hispánica, en particular entre los años 1696-1700.
Docta Complutense
Publication Capítulo o parte de un libro (BookPart)

Problemas de concordancia del régimen interno y comunitario de la responsabilidad patrimonial del Estado-legislador

  • Ruiz López, Miguel Ángel
Se reflexiona en este trabajo sobre la recíproca interacción del régimen de responsabilidad del Estado-legislador en el plano del Derecho interno y en el comunitario. En especial, desde la perspectiva de las dificultades que plantea su equivalencia o concordancia en su aplicación cotidiana por los operadores jurídicos. Se despejan los siguientes interrogantes: ¿Están inspiradas en las mismas ideas la responsabilidad del Estado-legislador por incumplimiento del Derecho de la Unión Europea y por infracción de la Constitución? ¿Está justificado que los jueces nacionales estén investidos del poder de valorar el alcance de la responsabilidad patrimonial del Estado por la infracción por una ley del Derecho de la Unión Europea o de la Constitución? ¿Son homologables ambas situaciones atendiendo a la distinta posición que ocupan los jueces en el ordenamiento jurídico? ¿Está justificada la inexigibilidad del requisito de la impugnación de los actos de aplicación de la ley contraria al Derecho de la Unión o a la Constitución?
Dipòsit Digital de Documents de la UAB
Publication Capítulo o parte de un libro (BookPart)

Diccionario y morfología, la información morfológica en la 22ª edición del DRAE

  • Buenafuentes de la Mata, Cristina|||0000-0001-5931-1290
  • Sánchez Lancis, Carlos Eliseo|||0000-0001-9111-1563
El propósito de esta comunicación es analizar el uso y función de la información morfológica, tanto explícita como implícita, del DRAE-2001 en su vigésima segunda edición, para poder evaluar la necesidad de la aparición de una marca específica de morfología en el diccionario y si su empleo resuelve todos los problemas morfológicos que se le plantean al usuario, sin necesidad de acudir a otro tipo de obras como gramáticas o manuales de estilo o de español correcto
Dipòsit Digital de Documents de la UAB
Publication Capítulo o parte de un libro (BookPart)

Teaching parallel programming in interdisciplinary studies

  • César Galobardes, Eduardo|||0000-0002-9729-8557
  • Cortés Fité, Ana|||0000-0003-1697-1293
  • Espinosa, Antonio|||0000-0002-6460-3789
  • Margalef, Tomàs|||0000-0001-6384-7389
  • Moure, Juan C.|||0000-0001-6697-0331
  • Sikora, Anna|||0000-0003-0090-4109
  • Suppi, Remo|||0000-0002-0373-8292
Nowadays many fields of science and engineering are evolving by the joint contribution of complementary fields. Computer science, and especially high performance computing, has become a key factor in the development of many research fields, establishing a new paradigm called computational science. Researchers and professionals from many different fields require a knowledge of high performance computing, including parallel programming, to develop a fruitful work in their particular field. So, at Universitat Autònoma of Barcelona, an interdisciplinary master on Modeling for science and engineering was started 5 years ago to provide a deep knowledge on the application of modeling and simulation to graduate students on different fields (Mathematics, Physics, Chemistry, Engineering, Geology, etc.). In this master, Parallel Programming appears as a compulsory subject, because it is a key topic for them. The concepts learnt in parallel programming must be applied to real applications. Therefore, a subject on Applied Modelling and Simulation has also been included. In this paper, the experience on teaching parallel programming in such interdisciplinary master is shown. © Springer International Publishing Switzerland 2015. Ministerio de Economía y Competitividad.
Dipòsit Digital de Documents de la UAB
Publication Capítulo o parte de un libro (BookPart)

Parentalidades múltiples y articulaciones disciplinarias. De fronteras, encrucijadas y vínculos

Dipòsit Digital de Documents de la UAB
Publication Capítulo o parte de un libro (BookPart)

Redes de crianza, cuidados y roles parentales en el ámbito de la adopción internacional

  • Grau Rebollo, Jorge|||0000-0003-2709-8696
  • Vich Bertran, Júlia|||0000-0002-4918-7844
  • Garcia Tugas, Lourdes|||0000-0003-3405-8772
Nuestra propuesta se inserta en el proyecto de investigación "Parentescos: Formas de Parentalidad y Articulaciones Disciplinarias" (CSO2012-39041-C02-01) y tiene como objetivo principal analizar los cuidados y roles entendidos como parentales, así como explorar la extensión de dichos roles en las redes de crianza configuradas en torno a menores adoptados por vía internacional. Nos proponemos con ello contribuir al ámbito de los estudios sobre parentalidad en el caso específico de la circulación internacional de menores por vía adoptiva. Entendiendo la adopción internacional como una categoría específica de la circulación de menores (fenómeno etnográficamente diverso cuyas variantes pueden diferir sustancialmente entre sí) nos centraremos en este estudio en examinar y dar cuenta de formas, no necesariamente coincidentes, de ejercer la parentalidad, incluyendo la crianza de menores compartida de forma simultánea o sucesiva entre diversas personas con o sin vinculación biológica o genealógica entre ellas. Para ello, aplicamos distintas estrategias cualitativas y cuantitativas de análisis que pretenden abordar el problema a diversos niveles: (a) seguimiento de un foro específico online, creado por los investigadores al inicio del proyecto en el seno de una popular red social de intercambio de información, al cual se han agregado individuos y grupos adoptantes, (b) cuestionarios administrados presencialmente y a través de Internet, (c) entrevistas en profundidad, (d) observación de campo y (e) técnicas específicas de registro, representación e interpretación de redes sociales. A partir de los resultados obtenidos en el proyecto, trataremos de reflexionar acerca de cómo se construyen y organizan estos cuidados, de qué modo se configuran las redes de crianza en torno a los menores adoptados, qué tipo de roles se establecen en consecuencia y quién(enes) los desempeñan.
Dipòsit Digital de Documents de la UAB
Publication Capítulo o parte de un libro (BookPart)

Migraciones y cambios en las pautas parentales : los trabajos de los niños y las niñas

  • Parramon Homs, Clara Carme
El propósito de esta comunicación es presentar primeros resultados relativos al ámbito de las parentalidades, en el marco de una investigación en curso sobre los movimientos migratorios que tuvieron lugar durante el franquismo. Se trata en concreto de las migraciones interiores protagonizadas por las mujeres que emigraron a Cataluña en aquellas décadas y hoy residentes en L'Hospitalet de Llobregat, un municipio de la periferia de Barcelona en el que en mayor número se asentaron. En el marco de aquellos movimientos migratorios, la complejidad que caracterizó los cambios en las pautas parentales comportó nuevas configuraciones del sistema de género, entre las cuales el propósito de esta comunicación es analizar las concernientes a los trabajos infantiles. Para ello, tras presentar brevemente las principales características del modelo etnográfico de parentesco en el que se enmarca esta comunicación, me referiré a las prácticas y representaciones relativas a los trabajos infantiles en las sociedades de origen, abordando a continuación, las referentes a los trabajos que se estaban desarrollando en la juventud, es decir, en las edades en que se emigraba, para así mejor poder contextualizar los cambios que tuvieron lugar al respecto en los procesos de integración social y adaptación cultural a la sociedad de nuevo asentamiento. El diseño técnico de la investigación en curso, paralelamente a la consulta de fuentes secundarias, se basa en un prolongado trabajo de campo que focaliza la realización de historias de vida a mujeres de distintos orígenes que participaron en las migraciones objeto de estudio, así como la observación participante en sus entornos familiares y grupales. En esta comunicación desarrollaré el tema expuesto basándome en las experiencias infantiles y juveniles de mujeres originarias de las zonas montañosas de Galicia y Aragón, dado el interés que a mi entender supone que ambos orígenes se configuren como aquellos en los que los cambios derivados de la emigración se perfilen como especialmente notables. Por lo que se refiere al trabajo de los niños en concreto, me baso en las menciones que ellas hacen, ya sea usando el masculino como genérico o como indicador discriminatorio.
Dipòsit Digital de Documents de la UAB
Publication Capítulo o parte de un libro (BookPart)

Periodic orbits of planar integrable birational maps

Dipòsit Digital de Documents de la UAB
Publication Capítulo o parte de un libro (BookPart)

InclusiVRity, Exploring the use and needs for virtual reality in education for neurodiversity

  • Oncins Noguer, Estel·la|||0000-0002-0291-3036
  • Tsaousi, Aikaterini|||0009-0004-1667-8649
Immersive environments have the potential to revolutionize education by enhancing motivation and enriching learning experiences. Recent research suggests that VR-based experiences can be particularly beneficial for neurodiverse students, aiding their social integration and skill-building. Still, the specific applications of VR solutions to address defined educational needs remain unexplored. This paper presents the results of an online survey conducted among 119 teaching professionals and supporters of neurodiverse students to identify the use, needs and interest about the introduction of VR technologies and tools in their teaching and supporting practices in different countries.
Dipòsit Digital de Documents de la UAB
Publication Capítulo o parte de un libro (BookPart)

Easy Language in Spain

RIUMA. Repositorio Institucional de la Universidad de Málaga
Publication Capítulo o parte de un libro (BookPart)

Mas determinaron las religiosas no lo cantara: intervenciones y relaciones de la capilla de música de la catedral de Málaga con los conventos femeninos de la ciudad (1800-1836)

  • De-la-Torre-Molina, María Josefa
Este estudio analiza las intervenciones que realizó y las relaciones que la capilla de música de la catedral de Málaga mantuvo con los conventos femeninos de la ciudad durante el primer tercio del siglo XIX (1800–1836). A partir del examen exhaustivo del Libro de las fiestas y del Libro de las Constituciones de la Capilla y de una elevada cantidad de los papeles con notación musical conservados en el Archivo de la Catedral de Málaga, la investigación ha permitido identificar los conventos en los que intervino el conjunto, las tipologías ceremoniales que atendió y los distintos agentes que se implicaron en la financiación y organización de estas celebraciones. El análisis pone de relieve que, en la Málaga del primer tercio del siglo XIX, las comunidades religiosas femeninas actuaron como promotoras e intermediarias decisivas, capaces de sostener ceremonias de notable complejidad ritual y musical y de activar redes que implicaban a otras instituciones, colectivos profesionales, hermandades y particulares. En este entramado, la Capilla no funcionó como un mero proveedor de servicios, sino como un agente que negoció, pactó y, en algunos casos, estableció vínculos estables con determinadas comunidades y con comitentes estrechamente vinculados a ellas, llegando incluso a firmar una carta de hermandad con las monjas capuchinas. Desde el punto de vista musical, el trabajo reconstruye una parte del repertorio asociado a estas celebraciones y revela la convivencia de obras heredadas y composiciones de nueva creación, así como la capacidad de los músicos para modificar piezas preexistentes, con el fin de adaptarlas a circunstancias diversas. Paralelamente, se identifican y examinan los condicionantes que influyeron en la contratación del conjunto y en la elección de los efectivos humanos y artísticos de estas «funciones contratadas». Asimismo, se aportan datos relevantes sobre las prácticas interpretativas documentadas y sobre la participación de músicos externos a la Capilla, que actuaron junto con ella o de manera independiente, incluida una monja cantora. A través de este análisis, el capítulo contribuye a una comprensión más precisa de la vida musical conventual —incluidas sus interacciones con la institución musical catedralicia— y ofrece nuevas perspectivas para el estudio de la religiosidad urbana, la piedad femenina y la circulación de repertorios y prácticas musicales en la Málaga de comienzos del siglo XIX., Proyecto de investigación «Práctica interpretativa en las catedrales hispanas (1563-1833): liturgia, estilos musicales y condiciones de ejecución», Proyecto de investigación «La cultura como generadora de sociedades inclusivas: La escritura femenina de la clausura española (siglos XVI-XIX)», Red de Investigación «Música, Arte e imagen pública de la monarquía: proclamaciones y funerales regios de los Borbones españoles (desde el siglo XVIII hasta nuestros días)»
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publication Capítulo o parte de un libro (BookPart)

Algunas consideraciones sobre los aspectos competenciales del caso Odyssey y el régimen de protección del Patrimonio Subacuático Español

  • Alcoceba Gallego, María Amparo
Esta monografía es uno de los resultados del proyecto de investigación I+D del Ministerio de Ciencia y Tecnología titulado "Relevancia para España del régimen internacional de protección de la cultura y del comercio de bienes culturales" (2006-2009), que dirige el profesor Carlos R. Fernández Liesa (SEJ 2006-2009-151317-C02-01)
Repositorio Digital de la UPF
Publication Capítulo o parte de un libro (BookPart)

Práctica y desarrollo del derecho en la Cataluña moderna: a propósito de la jurisprudencia judicial y la doctrina

  • Capdeferro i Pla, Josep
Se inscribe en los proyectos de investigación SEJ2006-15051-C03-01 del MEC, "El derecho histórico en los pueblos de España: ámbitos público y privado (siglos XII-XXI)”, dirigido por T. de Montagut, y HUM2005-01953/HIST del MEC, "Cataluña en la España moderna: memoria histórica y proyecto político”, dirigido por J. Abareda.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Pedagogy and new humanism at the time of Covid

  • Tataranni, Anna
[EN] Schools, society as a whole, have been deeply affected by the emergence of Covid19. The shift to distance teaching and learning has exacerbated many pre- existing vulnerabilities and inequalities in education systems. This paper argues for the urgency for school systems to accept new challenges in training, organizing           inclusive environments towards the promotion of collective social and critical capacities, in synergy with the digital within a school that broadens its horizons, its classrooms, capable of bringing in human riches, assuming the richness of the student as a unique and unrepeatable subject who develops thanks to the relationship with the other, capable of transformative resilience, which looks at the human becoming by virtue of the encounters of places, including virtual ones, that are experienced in the course of life. A school pervaded by a new humanism, the only true wealth.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Performance and Results of the Triple Buffering Built-In in a Raspberry PI to Optimize the Distribution of Information from a Smart Sensor

  • Jiménez García, José Luis
  • Baselga Masiá, David
  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Simó Ten, José Enrique|||0000-0003-4677-7627
Currently, 3D sensors can be considered an evolution of cameras by providing the image with its depth information. These sensors have a generic function and the programmer has to process the received information in order to be adapted and used in a specific environment. In robots navigation, the 3D information can be useful for basic behaviours such as obstacles avoidance or even more complex behaviours such as maps generation . In this article an image management system provided by the xTion intelligent sensor is presented. The xTion sensor provides a VGA image and a 3D depth, which allows it to be used for several purposes. In order to distribute the data, it is acquired, processed and sent to several clients with a triple buffer system modified to serve the most recent image to the client. The system is programmed in C for Linux and built-in in a Raspberry PI. The article exposes the performance and results from monitoring the frame's delay comparing it with a simple and a double buffer system widely used in this kind of systems., Coordinated project COBAMI: Mission-based Hierarchical Control. Education and Science Department, Spanish Government. CICYT: MICINN: DPI2011-28507-C02-01/02 and project “Real time distributed control systems” of the Support Program for Research and Development 2012 UPV (PAID-06-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

A self-evaluation tool of sustainability concepts in higher education institutions courses

  • Venezia, Elisabetta
  • Pizzutilo, Fabio
[EN] In this paper, a self-evaluation tool is developed to allow educators and Higher Education Institutions to assess their efforts in pursuing Education for Sustainable Development. The composite index here proposed allows the individual components that contribute to the pursuit of sustainability in education to be grasped in isolation and, at the same time, provides an overall evaluation measure of all the elements taken into consideration. The index is based on the identification of elements that measure the efficiency of the allocated expenditure. At the same time, it encompasses measures of the impact and perception of sustainability concept by staff and students. Albeit in a laborious way, the application of the tool leads to an unbiased assessment of education for sustainable development results. This composite indicator can be used in a replicative manner elsewhere and offers the advantage of being able to carry out comparative evaluative analyses. This is due to its adaptive flexibility., The study is part of EFFORT (EFFectiveness Of Responsible Teaching), a project (partially) funded by the Erasmus+ grant program of the European Union under grant no. 2019-1-DE01-KA203-005057. Neither the European Commission nor the project´s national funding agency DAAD are responsible for the content or liable for any losses or damage resulting of the use of these resources. We are grateful to the members of EFFORT team for their precious suggestions and insights while developing the paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Topology-based broadcast schemes for urban scenarios targeting adverse density conditions

  • Sanguesa, Julio A.
  • Fogue, Manuel
  • Garrido, Piedad
  • Martínez, Francisco J.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
[EN] Research works regarding vehicular communications usually obviate assessing the proposals in scenarios including adverse vehicle densities, despite such scenarios are quite common in real urban environments. In this paper, we study the effect of these hostile conditions on the performance of different schemes providing warning message dissemination. We then propose the Junction Store and Forward (JSF) and the Nearest Junction Located (NJL) schemes, which were specially designed to be used in very low and very high density scenarios, respectively. Simulation results using real maps demonstrate how our proposed schemes are able to outperform existing warning message dissemination schemes in urban environments under adverse vehicle density conditions., This work was partially supported by the Ministerio de Ciencia e Innovacion´ , Spain, under Grant TIN2011-27543- C03-01, as well as the Government of Arag ´on and the European Social Fund (T91 Research Group).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Using word graphs as intermediate representation of uttered sentences

  • Gomez, J.A.|||0000-0002-4174-3762
  • Sanchís Arnal, Emilio|||0000-0002-6737-4723
We present an algorithm for building graphs of words as an intermediate representation of uttered sentences. No language model is used. The input data for the algorithm are the pronunciation lexicon organized as a tree and the sequence of acoustic frames. The transition between consecutive units are considered as additional units. Nodes represent discrete instants of time, arcs are labelled with words, and a confidence measure is assigned to each detected word, which is computed by using the phonetic probabilities of the subsequence of acoustic frames used for completing the word. We evaluated the obtained word graphs by searching the path that best matches with the correct sentence and then measuring the word accuracy, i.e. the oracle word accuracy. © 2012 Springer-Verlag., This work was supported by the Spanish MICINN under contract TIN2011-28169-C05-01 and the Vic. d’Investigació of the UPV under contract 20110897.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Operational safety and operator management to enable the use of unmanned aircraft systems (UAS) as geomatics tools, Seguridad operacional y gestión del operador para habilitar el uso de sistemas aéreos no tripulados (UAS) como herramientas geomáticas

  • Vera, Norberto
  • Quintanilla, Israel
  • Vidal, Jordi
  • Fernández, Beatriz
[EN] Potential civil applications of Unmanned Aircraft Systems (UAS), commonly known as drones, have risen steeply during the last decade, mainly due to their versatility and capability of spatial data gathering. Nonetheless, real use of UAS is quite restricted nowadays, primarily due to safety and regulatory constraints. This multidisciplinary project aims to perform specific safety assessments using the SORA methodology adopted by the European Aviation Safety Agency (EASA) and develop documentation and procedures for operators to follow, complying with all required safety and regulatory requirements. As a result, DEURPAS-UPV is the first Spanish drone operator belonging to a university to be authorized by Spanish civil aviation agency (AESA-Agencia Estatal de Seguridad Aérea), to perform drone flights in urban areas, in controlled airspace and during the night. In addition, DEURPAS-UPV has performed the first authorized experimental transport operations using drones in Spain. The results from safety assessment and designed procedures have been successfully applied to the operation of Safety and Emergency service providers, such as Valencia Local Police Corps and the Valencian Emergency and Safety Response Agency (AVSRE - Agencia Valenciana de Seguridad y Respuesta a las Emergencias). Overall, this project has served as an enabler for more complex and safer UAS operations, from the operator’s point of view, which will help break the barriers related to the use of these aircraft, with huge potential in geomatics applications., [ES] Las aplicaciones civiles de los sistemas aéreos no tripulados (UAS), comúnmente conocidos como drones, han aumentado considerablemente durante la última década, principalmente debido a su versatilidad y capacidad de recopilación de datos espaciales. Sin embargo, el uso real de los UAS está bastante restringido hoy en día, principalmente debido a las restricciones de seguridad y legislativas. Este proyecto multidisciplinar tiene como objetivo realizar evaluaciones de seguridad específicas utilizando la metodología SORA adoptada por la Agencia Europea de Seguridad Aérea (EASA) y desarrollar documentación y procedimientos para que los operadores los sigan, cumpliendo con todos los requisitos de seguridad y normativos exigidos. Como resultado, DEURPAS-UPV es el primer operador español de drones perteneciente a una universidad que ha sido autorizado por la Agencia Estatal de Seguridad Aérea (AESA), para realizar vuelos con drones en zonas urbanas, en espacio aéreo controlado y durante la noche. Además, DEURPAS-UPV ha realizado las primeras operaciones experimentales de transporte con drones autorizadas en España. Los resultados de la evaluación de seguridad y los procedimientos diseñados se han aplicado con éxito a la operación de proveedores de servicios de Seguridad y Emergencias, como el Cuerpo de Policía Local de Valencia y la Agencia Valenciana de Segurida y Respuesta a las Emergencias (AVSRE). En general, este proyecto ha servido para facilitar operaciones con UAS más complejas y seguras, desde el punto de vista del operador, lo que ayudará a romper las barreras relacionadas con el uso de estas aeronaves, con un enorme potencial en aplicaciones geomáticas., This work was supported by the Generalitat Valenciana under Grant DECRETO 63/2020 and Universitat Politècnica de València under Grant PAID-01-1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

The MORFO3D foot database

  • García Hernández, José
  • Juan Císcar, Alfons
  • Nácher Rodríguez, Beatriz
  • Alemany, Sandra
  • Alcántara, Enrique
  • González, Juan Carlos
  • Heras, Stella|||0000-0001-6212-9377
  • Paredes Palacios, Roberto
A foot database comprising 3D foot shapes and footwear fitting reports of more than 300 participants is presented. It was primarily acquired to study footwear fitting, though it can also be used to analyse anatomical features of the foot. In fact, we present a technique for automatic detection of several foot anatomical landmarks, together with some empirical results., Work supported by the “Agència Valenciana de Ciència i Tecnologia” under grant GRUPOS03/031 and the Spanish projects DPI2001-0880-CO2-01 and DPI2001-0880-CO2-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Developing Adaptive Agents Situated in Intelligent Virtual Environments

  • Rincón Arango, Jaime Andrés
  • Garcia Marques, Mª Emilia
  • Julian, Vicente|||0000-0002-2743-6037
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
This paper presents a framework specially designed for the execution and adaptation of Intelligent Virtual Environments. This framework, called JACALIVE, facilitates the development of this kind of environments managing in an efficient and realistic way the evolution of parameters for the adaptation of the physical world. The framework includes a design method and a physical simulator which is in charge of giving the Intelligent Virtual Environment the look of the real or physical world, allowing to simulate physical phenomena such as gravity or collision detection. The paper also includes a case study which illustrates the use of the proposed framework., This work is partially supported by the TIN2009-13839-C03-01, TIN2011-27652-003-01, CSD2007-00022, COST Action 100801, FP7-294931 and the FPI grant AP2013-01276 awarded to Jaime-Andres Rincon.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Liquid-Liquid Secondary Fragmentation with Solidification

  • Hadj-Achour, M.
  • Rimbert, Nicolas
  • Gradeck, M.
[EN] In the event of a hypothetical core disruptive accident in nuclear power plants, the molten core may flow out the reactor vessel and interact with the cold water. The evolution of the accident is strongly affected by the fragmentation of the jet of molten metallic fuel due to its interaction with the water (i.e. this situation is known as fuel coolant interaction, FCI). In order to evaluate and predict the various consequences of a FCI, many researches are conducted with either corium or high melting temperature molten metal, where premixing stage evolves with an important production of steam. This steam production that is unavoidable because the high temperature of corium leads to difficulties for using optical diagnostics. Hence, in our case, we use a eutectic alloy (Field’s metal) with a low melting point (62°C) in order to be able to visualize correctly the droplet fragmentation processes. The present work focuses on the fragmentation of a single Field’s metal liquid droplet with mass equals to 0.27g (±0.01g). The liquid droplet interacts with a water pool whose temperature range between 20°C to 60°C. According to its Weber number, it fragments in different ways. For each experiment, a single droplet has been visualized using a high-speed camera (at 8000 fps). All measurements (drop size, velocity, impact parameter and geometrical properties of the drops after the penetration) into the pool are evaluated using an open source image processing. Solidified fragments can then be sieved and the size PDF determined. Focus of the present work is put on the evolution of the Sauter Mean Diameter with increasing Weber number and varying bath pool temperature. It is shown that using a simple crust model during solidification and defining an effective Weber number which include the crust elasticity all the curves collapse on the same master curve for all the water bath temperature considered., This work has been funded by French Government through “programme d'investissements d'avenir” AnR RSNR ICE under the grant n° ANR-10-RSNR-01. The authors would also like to mention support from EU-COST Action MP1305 “Flowing Matter”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Using evolution strategies to reduce emergency services arrival time in case of accident

  • Barrachina Villalba, Javier
  • Garrido, Piedad
  • Fogue, Manuel
  • Martínez, Francisco J.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] A critical issue, especially in urban areas, is the occurrence of traffic accidents, since it could generate traffic jams. Additionally, these traffic jams will negatively affect to the rescue process, increasing the emergency services arrival time, which can determine the difference between life or death for injured people involved in the accident. In this paper, we propose four different approaches addressing the traffic congestion problem, comparing them to obtain the best solution. Using V2I communications, we are able to accurately estimate the traffic density in a certain area, which represents a key parameter to perform efficient traffic redirection, thereby reducing the emergency services arrival time, and avoiding traffic jams when an accident occurs. Specifically, we propose two approaches based on the Dijkstra algorithm, and two approaches based on Evolution Strategies. Results indicate that the Density-Based Evolution Strategy system is the best one among all the proposed solutions, since it offers the lowest emergency services travel times., This work was partially supported by the Ministerio de Ciencia e Innovacióm , Spain, under Grant TIN2011-27543-C03-01, as well as by the Fundación Universitaria Antonio Gargallo, the Obra Social de Ibercaja, the Government of Aragon, and the European Social Fund (T91 Research Group).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Betão auto-compactável com incorporação de resíduo de mármore

  • Destefani, André
  • Nunes, Sandra
  • Sousa-Countinho, Joana
[PT] O setor da construção civil é responsável por um grande consumo de matérias-primas e pela intensa geração de resíduos, e vem trabalhando na criação de procedimentos e produtos, buscando cada vez mais a sustentabilidade. O betão auto-compactável (BAC) permite a produção de um material mais “verde”, por exemplo, através do reaproveitamento de resíduos industriais. No presente trabalho desenvolveu-se um programa experimental visando a otimização de composições de BAC com incorporação do resíduo do beneficiamento de mármores, da região do Alentejo em Portugal, conhecida como Zona do Mármore. O programa experimental foi realizado segundo um plano fatorial ao nível do betão, fixando a composição da pasta, para otimizar o esqueleto sólido formado pelos agregados. Os resultados obtidos permitiram concluir que é possível substituir cimento por pó de mármore sem afetar significativamente as propriedades de autocompactabilidade e assim conseguir composições de BAC de mais baixa resistência e mais eco-eficientes, adequadas a uma grande variedade de aplicações de betão estrutural., Este trabalho foi financiado pelo Projeto POCI-01-0145-FEDER-007457 – CONSTRUCT – Instituto de I&D em Estruturas e Construções – financiado pelo Fundo Europeu de Desenvolvimento Regional (FEDER) através do COMPETE2020 – Programa Operacional Competitividade e Internacionalização (POCI) e por fundos nacionais através da Fundação para a Ciência e a Tecnologia I.P. Os autores agradecem ainda o apoio do Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq), Instituto Federal Fluminense (IFF) e do Centro Tecnológico da Pedra Natural de Portugal (CEVALOR).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Determinação da resistência à tração de camadas de UHPFRC com base em ensaio não-destrutivo

  • Nunes, Sandra
  • Pimentel, Mário
  • Abrishambaf, Amin
[ES] No presente artigo apresenta-se um procedimento para estimar a resistência à tração de camadas de materiais cimentícios de ultra-elevado desempenho reforçados com fibras de aço (Ultra-High Performance Fibre-Reinforced cement Composites – UHPFRC na sigla em Inglês), recorrendo a um modelo mecânico simples proposto inicialmente por Naaman [1]. Este procedimento baseia-se na aplicação de um método de ensaio não-destrutivo (NDT), desenvolvido na FEUP, que permite avaliar a dosagem e um coeficiente de orientação das fibras; e em ensaios laboratoriais de tração para estimar a tensão de aderência fibra-matriz equivalente, assumindo um comportamento rigido-plástico. Foi desenvolvido um programa experimental que permitiu estabelecer a relação entre o coeficiente de orientação determinado pelo método NDT e os parâmetros de orientação determinados a partir de análise de imagem. Finalmente, seguindo o procedimento proposto, foi estimada a resistência à tração de diversos provetes, com uma gama variada de dosagens e orientação das fibras, e comparada com os resultados experimentais. A boa correlação encontrada demonstra o potencial do método NDT proposto para a implementação de procedimentos de controle de qualidade em aplicações com UHPFRC., Este trabalho foi financiado por: Projeto POCI-01-0145-FEDER-007457 - CONSTRUCT - Instituto de I&D em Estruturas e Construções - financiado pelo Fundo Europeu de Desenvolvimento Regional (FEDER), através do COMPETE2020 – Programa Operacional Competitividade e Internacionalização (POCI) e por fundos nacionais através da FCT.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Multimodal interactive transcription of ancient text images

  • Romero Gómez, Verónica
  • Sánchez Peiró, Joan Andreu|||0000-0003-0423-2020
  • Toselli, Alejandro Héctor|||0000-0001-6955-9249
  • Vidal, Enrique|||0000-0003-4579-5196
The amount of digitized legacy documents has been rising dramatically over the last years due mainly to the increasing number of on-line digital libraries publishing this kind of documents. On one hand, the vast majority of these documents remain waiting to be transcribed into a textual electronic format (such as ASCII or PDF) that would provide historians and other researchers new ways of indexing, consulting and querying these documents. On the other hand, in some cases, adequate transcriptions of the handwritten text images are already available. This drives an increasing need to align images and transcriptions in order to make it more comfortable the consulting of these documents. In this work two systems are presented to deal with these issues. The first one aims at transcribing these documents using a interactive-predictive approach, which integrates user corrective-feedback actions in the proper recognition process. The second one presents an alignment method based on the Viterbi algorithm to find mappings between word images of a given handwritten document and their respective (ASCII) words on its given transcription., Work supported by the Spanish Government (MICINN and “Plan E”) under the MITTRAL (TIN2009-14633-C03-01) research project and under the research programme Consolider Ingenio 2010: MIPRCV (CSD2007- 00018) and the Generalitat Valenciana under gran Prometeo/2009/14.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Enhancing Performance and Energy Consumption of HER Caches by Adding Associativity

  • Lorente Garcés, Vicente Jesús
  • Valero Bresó, Alejandro
  • Canal, Ramón
Unlike other previous techniques, the recently proposed Hard Error Recovery (HER) fault-tolerant cache provides 100% fault-coverage in L1 data caches. This full coverage makes the HER cache appropiate for fault-dominated future technology nodes. An n-way set-associative HER cache implements one cache way with fast SRAM banks and the remaining ways with eDRAM banks to address power and area. Since the number of eDRAM cache blocks used in a specific HER cache organization depends on the cache associativity (i.e., the implemented number of ways), we expect that the performance and energy consumption provided by a given HER cache design strongly depends on the cache geometry. In this work we study the behavior of the HER cache design when applied to a highly associative L1 cache like those found in some modern microprocessors. In particular this work explores a 32KB 8-way associative L1 data cache such as the one used in Intel Haswell microarchitecture. Experimental results show that, at low-power modes compared to a conventional cache with the same storage capacity and number of ways, area, leakage power, and dynamic energy savings of a 4-way HER cache are by 25%, 85%, and 62%, respectively. These percentages are further improved (by 40%, 89%, and 68%, respectively) when the cache associativity is increased to 8 ways, while the performance loss with respect to both an 8-way conventional cache and the 4-way HER cache is minimal., This work was supponed by Generalitat de Catalunya (200950R1250), by FP7 program of the European Commission (TRAMS-248789), by Spanish Ministerio de Economía y Competitividad (MINECO) and by FEDER funds under Grant TlN2012-38341-C04-01 and TIN2010-18368.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Towards smart open dynamic fleets

  • Billhardt, Holger
  • Fernández, Alberto
  • Lujak, Marin
  • Ossowski, Sascha
  • Paz, Juan F. De
  • Hernández, Josefa Z.
  • Julian, Vicente|||0000-0002-2743-6037
Nowadays, vehicles of modern fleets are endowed with advanced devices that allow the operators of a control center to have global knowledge about fleet status, including existing incidents. Fleet management systems support real-time decision making at the control center so as to maximize fleet perform‐ ance. In this paper, setting out from our experience in dynamic coordination of fleet management systems, we focus on fleets that are open, dynamic and highly autonomous. Furthermore, we propose how to cope with the scalability problem as the number of vehicles grows. We present our proposed architecture for open fleet management systems and use the case of taxi services as example of our proposal., Work partially supported by Spanish Government through the projects iHAS (grant TIN2012-36586-C03) and SURF (grant TIN2015-65515-C4-X-R), the Autonomous Region of Madrid through grant S2013/ICE-3019 (“MOSI-AGIL-CM”, cofunded by EU Structural Funds FSE and FEDER) and URJC-Santander (30VCPIGI15).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Architectural Education Provides Hard/Soft Competences

  • Sentieri Omarrementeria, Carla|||0000-0002-1156-5053
  • Barosio, Michela
  • Ceko, Andrea
[EN] The proposal for the European Qualifications Framework was launched by the European Commission in September 2006. This recommendation outlines an overarching framework to be set up in Europe to facilitate the comparison of qualifications and qualifications levels to promote geographical and labour market mobility as well as lifelong learning. 1 The Qualifications Frameworks in the European Higher Education Area (QFEHEA), although it was launched prior in 1999 together with the Bologna process, is coherent with the EQF, as they adopt the same descriptors, namely knowledge, skills, and competences.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

The Science of Complex Systems for Preparing the New Generation to Tackle Global Challenges

  • Gentili, Pier Luigi
  • Cardinali, Gianluigi
  • Dominici, Piero
  • Grohmann, David
  • Menconi, Maria Elena
  • Santi, Claudio
[EN] The contemporary Information and Communication Technologies and always faster means of transport facilitate the interconnection among the humans on Earth as never before. There is the awareness that every human is a node of a giant network, which is the humanity on Earth. A problem in a community might easily become a global issue and involve everyone living on the planet Earth. A challenge in a specific sector can have repercussions in other areas. If humanity wants to face global challenges more easily, it is necessary that higher education prepares not only specialists but also generalists. This work proposes a strategy to form a new generation of generalists. Our strategy is based on teaching the science of Complex Systems. Complexity Science prepares a class of generalists who have the necessary knowledge and thinking skills to face any global challenge of this century., This work was supported by the Strategic Partnership European Project Erasmus+ titled “Enhancing Higher Education on Complex Systems THINKING for sustainable development” [grant number 2020-1-SE01-KA203-077872].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Voice-QA: evaluating the impact of misrecognized words on passage retrieval

  • Calvo Lance, Marcos
  • Buscaldi, Davide
  • Rosso, Paolo|||0000-0002-8922-1242
Question Answering is an Information Retrieval task where the query is posed using natural language and the expected result is a concise answer. Voice-activated Question Answering systems represent an interesting application, where the question is formulated by speech. In these systems, an Automatic Speech Recognition module can be used to transcribe the question. Thus, recognition errors may be introduced, producing a significant effect on the answer retrieval process. In this work we study the relationship between some features of misrecognized words and the retrieval results. The features considered are the redundancy of a word in the result set and its inverse document frequency calculated over the collection. The results show that the redundancy of a word may be an important clue on whether an error on it would deteriorate the retrieval results, at least if a closed model is used for speech recognition., This work was carried out in the framework of TextEnterprise (TIN2009-13391-C04-03), Timpano (TIN2011-28169-C05-01), WIQEI IRSES (grant no. 269180) within the FP 7 Marie Curie People, FPU Grant AP2010-4193 from the Spanish Ministerio de Educaci´on (first author), and the Microcluster VLC/Campus on Multimodal Intelligent Systems (third author)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Monitoring embankment dams from space using satellite radar interferometry: Case studies from RemoDams project

  • Ruiz-Armenteros, Antonio
  • Delgado-Blasco, José Manuel
  • Bakon, Matus
  • Lamas-Fernández, Francisco
  • Marchamalo-Sacristán, Miguel
  • Gil-Cruz, Antonio
  • Papco, Juraj
  • González-Rodrigo, Beatriz
  • Lazecky, Milan
  • Perissin, Daniele
  • Sousa, Joaquim J.
  • Sousa, Joaquim
[EN] The monitoring procedures with different geotechnical/structural sensors and classical geodetic techniques including GNSS are the usual practices in most of the dams where these controls are established. Other geomatic techniques such as TLS, GB-SAR and multi-temporal InSAR (MT-InSAR), allow the determination of 3D displacements with the advantage of covering a large number of control points. In particular, MT-InSAR techniques enable the detection of displacements at a very low cost compared to other techniques, and without the need for field work or the installation of special equipment. In addition, they can provide a single source of information on the stability of the dam when monitoring programs are not carried out due to lack of funding, resources or other reasons. These techniques provide measurement uncertainties of the order of 1 mm/year, interpreting time series of interferometric phases of coherent reflectors present in the area, called Persistent Scatterers. In this work, we present the adaptation and application of MT-InSAR techniques to monitor embankment dams, obtaining vertical displacements, characterizing their consolidation rates, and allowing the identification of potential problems surrounding the reservoir that require further field investigation. This study is part of the ReMoDams project, a Spanish research initiative developed for monitoring dam structural stability from space using satellite radar interferometry., ERS-1/2 and Envisat data sets were provided by the European Space Agency (ESA). Sentinel-1A/B data were freely provided by ESA through Copernicus Programme. Data have been processed by DORIS (TUDelft), StaMPS (Andy Hooper), SARPROZ (Copyright (c) 2009-2020 Daniele Perissin), and SNAP (ESA). The satellite orbits are from TUDelft and ESA, as well as from the ESA Quality control Group of Sentinel-1. Research was supported by: (a) ESA Research and Service Support for providing hardware resources employed in this work, (b) ReMoDams project ESP2017-89344-R (AEI/FEDER,UE) from Spanish Ministry of Economy, Industry and Competitiveness, POAIUJA-2021/2022 and CEACTEMA from University of Jaén (Spain), and RNM-282 research group from the Junta de Andalucía (Spain), (c) ERDF through the Operational Programme for Competitiveness and Internationalisation - COMPETE 2020 Programme within project «POCI-01-0145-FEDER-006961», and by National Funds through the FCT – Fundação para a Ciência e a Tecnologia (Portuguese Foundation for Science and Technology) as part of project UID/EEA/50014/2013, (d) The Ministry of Education, Youth and Sports from the National Programme of Sustainability (NPU II) project «IT4Innovations excellence in science - LQ1602» (Czech Republic), and (e) Slovak Grant Agency VEGA under projects No. 2/0100/20
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Multimodal Interactive Parsing

  • Benedí Ruiz, José Miguel
  • Leiva, Luis A.
  • Sánchez Sáez, Ricardo
  • Maca, Mauricio
  • Sánchez Peiró, Joan Andreu|||0000-0003-0423-2020
Probabilistic parsing is a fundamental problem in Computational Linguistics, whose goal is obtaining a syntactic structure associated to a sentence according to a probabilistic grammatical model. Recently, an interactive framework for probabilistic parsing has been introduced, in which the user and the system cooperate to generate error-free parse trees. In an early prototype developed according to this interactive parsing technology, user feedback was provided by means of mouse actions and keyboard strokes. Here we augment the interaction style with support for (non-deterministic) natural handwritten recognition, and provide confidence measures as a visual aid to ease the correction process. Handwriting input seems to be a modality specially suitable for parsing, since the vocabulary size involved in the recognition of syntactic labels is fairly limited and thus intuitively errors should be small. However, errors may increase as handwriting quality (i.e., calligraphy) degrades. To solve this problem, we introduce a late fusion approach that leverages both on-line and off-line information, corresponding to pen strokes and contextual information from the parse trees. We demonstrate that late fusion can effectively help to disambiguate user intention and improve system accuracy., This research has received funding from the EC’s 7th Framework Programme (FP7/2007-13) under grant agreement No.287576- CasMaCat; from the Spanish MEC under the STraDA project (TIN2012-37475- C02-01) and the MITTRAL project (TIN2009-14633-C03-01); from the GV under the Prometeo project; and from the Universidad del Cauca (Colombia)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Multimodal output combination for transcribing historical handwritten documents

  • GRANELL, EMILIO|||0000-0001-5782-7568
  • Martínez-Hinarejos, Carlos-D.|||0000-0002-6139-2891
Transcription of digitalised historical documents is an interesting task in the document analysis area. This transcription can be achieved by using Handwritten Text Recognition (HTR) on digitalised pages or by using Automatic Speech Recognition (ASR) on the dictation of contents. Moreover, another option is using both systems in a multimodal combination to obtain a draft transcription, given that combining the outputs of different recognition systems will generally improve the recognition accuracy. In this work, we present a new combination method based on Confusion Network. We check its effectiveness for transcribing a Spanish historical book. Results on both unimodal combination with different optical (for HTR) and acoustic (for ASR) models, and multimodal combination, show a relative reduction of Word and Character Error Rate of 14.3% and 16.6%, respectively, over the HTR baseline., Work partially supported by European Union -7th FP, under grant 600707 (tranScriptorium), and by the Spanish MEC under projects STraDA (TIN2012-37475-C02-01), Active2Trans (TIN2012-31723), and SmartWays (RTC-2014-1466-4).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Relevant clouds: leveraging relevance feedback to build tag clouds for image search

  • Leiva Torres, Luis Alberto
  • Villegas Santamaría, Mauricio
  • Paredes Palacios, Roberto
Previous work in the literature has been aimed at exploring tag clouds to improve image search and potentially increase retrieval performance. However, to date none has considered the idea of building tag clouds derived from relevance feedback. We propose a simple approach to such an idea, where the tag cloud gives more importance to the words from the relevant images than the non-relevant ones. A preliminary study with 164 queries inspected by 14 participants over a 30M dataset of automatically annotated images showed that 1) tag clouds derived this way are found to be informative: users considered roughly 20% of the presented tags to be relevant for any query at any time; and 2) the importance given to the tags correlates with user judgments: tags ranked in the first positions tended to be perceived more often as relevant to the topic that users had in mind., Work supported by EU FP7/2007-2013 under grant agreements 600707 (tranScriptorium) and 287576 (CasMaCat), and by the STraDA project (TIN2012-37475-C02-01).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

A dynamic power-aware partitioner with task migration for multicore embedded systems

  • March Cabrelles, José Luis
  • Duato Marín, José Francisco
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Hassan Mohamed, Houcine|||0000-0002-2038-0587
Nowadays, a key design issue in embedded systems is how to reduce the power consumption, since batteries have a limited energy budget. For this purpose, several techniques such as Dynamic Voltage Scaling (DVS) or task migration can be used. DVS allows reducing power by selecting the optimal voltage supply, while task migration achieves this effect by balancing the workload among cores. This paper first analyzes the impact on energy due to task migration in multicore embedded systems with DVS capability and using the well-known Worst Fit (WF) partitioning heuristic. To reduce overhead, migrations are only performed at the time that a task arrives to and/or leaves the system and, in such a case, only one migration is allowed. The huge potential on energy saving due to task migration, leads us to propose a new dynamic partitioner, namely DP, that migrates tasks in a more efficient way than typical partitioners. Unlike WF, the proposed algorithm examines which is the optimal target core before allowing a migration. Experimental results show that DP can improve energy consumption in a factor up to 2.74 over the typical WF algorithm. © 2011 Springer-Verlag., This work was supported by Spanish CICYT under Grant TIN2009-14475-C04-01, and by Consolider-Ingenio under Grant CSD2006-00046.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Inconsistency-tolerant business rules in distributed information systems

  • DECKER, HENDRIK
  • Muñoz-Escoí, Francesc D.|||0000-0002-7216-9249
Business rules enhance the integrity of information systems. However, their maintenance does not scale up easily to distributed systems with concurrent transactions. To a large extent, that is due to two problematic exigencies: the postulates of total and isolated business rule satisfaction. For overcoming these problems, we outline a measure-based inconsistency-tolerant approach to business rules maintenance., Supported by ERDF/FEDER and MEC grants TIN2009-14460-C03, TIN2010-17139, TIN2012-37719-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Using Magentix2 in Smart-Home Environments

  • Valero Cubas, Soledad|||0000-0003-4565-326X
  • Del Val Noguera, Elena|||0000-0002-1279-3429
  • Botti V.|||0000-0002-6507-2756
  • Alemany Bordera, José
[EN] In this paper, we present the application of a multi-agent platform Magentix2 for the development of MAS in smart-homes. Specificallly, the use of Magentix2 (http://gti-ia.upv.es/sma/tools/magentix2/index.php) platform facilitates the management of the multiple occupancy in smart living spaces. Virtual organizations provide the possibility of defining a set of norms and roles that facilitate the regulation and control of the actions that can be carried out by the internal and external agents depending on their profile. We illustrate the applicability of our proposal with a set of scenarios. © Springer International Publishing Switzerland 2015., This work is supported by the Spanish government grants CONSOLIDER INGENIO 2010 CSD2007-00022, MINECO/FEDER TIN2012-36586-C03-01, TIN2011-27652-C03-01, and SP2014800.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Multi-Agent Architecture with Support to Quality of Service and Quality of Control

  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Simó Ten, José Enrique|||0000-0003-4677-7627
Multi Agent Systems (MAS) are one of the most suitable frameworks for the implementation of intelligent distributed control system. Agents provide suitable flexibility to give support to implied heterogeneity in cyber-physical systems. Quality of Service (QoS) and Quality of Control (QoC) parameters are commonly utilized to evaluate the efficiency of the communications and the control loop. Agents can use the quality measures to take a wide range of decisions, like suitable placement on the control node or to change the workload to save energy. This article describes the architecture of a multi agent system that provides support to QoS and QoC parameters to optimize de system. The architecture uses a Publish-Subscriber model, based on Data Distribution Service (DDS) to send the control messages. Due to the nature of the Publish-Subscribe model, the architecture is suitable to implement event-based control (EBC) systems. The architecture has been called FSACtrl, The architecture described in this article is a part of the coordinated project SIDIRELI: Distributed Systems with Limited Resources. Control Kernel and Coordination. Education and Science Department, Spanish Government and FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Counting co-occurrences in citations to identify plagiarised text fragments

  • Pertile, Solange de Lurdes
  • Moreira, Viviane P.
  • Rosso, Paolo|||0000-0002-8922-1242
Research in external plagiarism detection is mainly concerned with the comparison of the textual contents of a suspicious document against the contents of a collection of original documents. More recently, methods that try to detect plagiarism based on citation patterns have been proposed. These methods are particularly useful for detecting plagiarism in scientific publications. In this work, we assess the value of identifying co-occurrences in citations by checking whether this method can identify cases of plagiarism in a dataset of scientific papers. Our results show that most the cases in which co-occurrences were found indeed correspond to plagiarised passages, This work was partially funded by CNPq (478979/2012-6). Solange Pertile’s 5-month internship at NLE Lab of Universitat Polit`ecnica de Val`encia was funded by CAPES. P.Rosso’s work was carried out in the framework of the the VLC/CAMPUS Microcluster on Multimodal Interaction in Intelligent Systems and the European Commission WIQ-EI IRSES (no. 269180) and DIANA-APPLICATIONSFinding Hidden Knowledge in Texts: Applications (TIN2012-38603-C02-01) research projects. We thank the authors of [5] for sharing their dataset with us and Enrique Flores for the preliminary brainstorming on how to identify co-occurrences in citations
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Application of dry-ice for transient spray cooling

  • Panao, Miguel
  • Costa, José
  • Bernardo, Mário
[EN] Spray cooling systems are able to remove large amounts of heat due to phase-change. Although vaporization is the most common phase-change process used in applications requiring thermal management, the use of liquids often implies the presence of a liquid film which is known to mitigate cooling performance. Thus, it is worth exploring other approaches for spray cooling avoiding liquid films. The work presented here explores sublimation using CO2 particles (dry-ice) formed through the Joule-Thomson effect. The application of interest is the molding industry, where reducing the cycle time taking advantage of the time-frame available between the mold opening and closing during the part’s extraction, allows a production increase and, consequently, a higher competitive advantage in the market. The purpose of the experiments performed in dry-ice particle spray cooling is to investigate the effect of the impingement distance (350-450mm), and injection duration, on the total energy flux removed from the surface, and cooling efficiency, in order to assess the performance of sublimation spray cooling. The results show an evolution of temperature distribution from a more homogeneous pattern with shorter pulses to a heterogeneous one for pulse durations longer than 1 s. This is particularly useful in hotspot cooling. In terms of changing the spray impact distance, the higher particle dispersion achieved with a larger distance led to a decrease in thermal performance, probably due to the saturation of CO2 close to the impact surface. However, the pattern observed for the evolution of the total energy flux removed, with a maximum around an injection duration of 0.5 s, remains unaltered. The maximum cooling efficiency, obtained for the shortest distance, is up to 30%, which is comparable to spray cooling systems based on vaporization., The authors would like to acknowledge to the financial support of project EMCool - Efficient Mold Cooling (POCI01-0247-FEDER-011375)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

EDM-GNSS distance comparison at the EURO5000 calibration baseline: preliminary results

  • Wezka, Kinga
  • Próchniewicz, Dominik
  • Szpunar, Ryszard
  • Garrigues, Pascual
  • Walo, Janusz
  • Luján, Raquel
  • García-Asenjo Villamayor, Luis|||0000-0001-6535-2216
  • Baselga Moreno, Sergio|||0000-0002-0492-4003
[EN] At the Pieniny Kippen Belt in Poland, the novel primary reference baseline EURO5000 is required as part of the European Research project GeoMetre to both validate refractivity-compensated EDM prototypes and investigate the metrological traceability of GNSS-based distances. Since the aimed uncertainty is 1 mm at 5 km (k=2), the design, construction, and validation must be carefully prepared to fulfil the high standards of the GeoMetre field campaigns which are planned to be carried out in May 2022. This contribution describes the main features of the EURO5000 and presents the results of the preliminary validation which includes a first comparison between the results obtained by using precise currently available EDMs as well as GNSS techniques following the standard GNSS geodetic processing algorithms, on the one hand, and the improved GNSS-Based Distance Meter (GBDM+) approach developed at UPV, on the other hand. The preliminary validation presented in this contribution also permits (1) to detect potential problems in the use of the baseline such as potential geodynamic problems, atmospheric refraction or multipath limitations, (2) to produce a set of reliable results, and (3) to pave the way for the final field comparisons between the novel EDMs and the GBDM+ approach. The result of this metrological experiment may significantly contribute to overcome the limitations of current high-precision deformation monitoring applications that require their scale to be consistent with the SI-metre within 0.1 ppm in several km., The project 18SIB01 GeoMetre has received funding from the EMPIR programme co-financed by the Participating States and from the European Union’s Horizon 2020 research and innovation programme, funder ID: 10.13039/100014132. Raquel Luján acknowledges the funding from the Programa de Ayudas de Investigación y Desarrollo (PAID-01-20) de la Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Active learning for dialogue act labelling

  • Ghigi, Fabrizio
  • Tamarit Ballester, Vicent
  • Benedí Ruiz, José Miguel
  • Martínez-Hinarejos, Carlos-D.|||0000-0002-6139-2891
Active learning is a useful technique that allows for a considerably reduction of the amount of data we need to manually label in order to reach a good performance of a statistical model. In order to apply active learning to a particular task we need to previously define an effective selection criteria, that picks out the most informative samples at each iteration of active learning process. This is still an open problem that we are going to face in this work, in the task of dialogue annotation at dialogue act level. We present two different criteria, weighted number of hypothesis and entropy, that we have applied to the Sample Selection Algorithm for the task of dialogue act labelling, that retrieved appreciably improvements in our experimental approach. © 2011 Springer-Verlag., Work supported by the EC (FEDER/FSE) and the Spanish MEC/MICINN under the MIPRCV “Consolider Ingenio 2010” program (CSD2007-00018), MITTRAL (TIN2009-14633-C03-01) projects and the FPI scholarship (BES-2009-028965). Also supported by the Generalitat Valenciana under grant Prometeo/2009/014 and GV/2010/067
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

VEWE: A vehicle ECU wireless Emulation Tool Supporting OBD-II Communication and Geopositioning

  • Alvear, Oscar
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Almost all the vehicles built during the last decade integrate an On Board Diagnostic (OBD-II) interface, through which it is possible to monitor and manage multiple operational parameters. In the past few years, Bluetooth OBD-II devices have been introduced in the market to facilitate connection to mobile devices. With the increased use of these devices, many applications for real-time control and monitoring of different parameters are being developed in the automotive sector. This infrastructure has opened a broad research area related to "smart driving". The main problem in the development and testing of these applications is the need to debug and validate them using different vehicles, under different configurations and scenarios. Our proposal to address this problem is VEWE: Vehicle Wireless Emulator offering realistic vehicle dynamics, which allows testing the correctness and the performance of mobile applications using off-the-shelf computers, thereby speeding up the development time and lowering costs. Another useful functionality of VEWE is the emulation of Geo-positions in Android systems through a GPS-Emulator. By combining both functionalities, VEWE provides a complete and flexible development environment for mobile vehicular applications., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Language technology for handwritten text recognition

  • Toselli, Alejandro Héctor|||0000-0001-6955-9249
  • Giménez Pastor, Adrián
  • Juan, Alfons|||0000-0002-9984-4072
  • Vidal, Enrique|||0000-0003-4579-5196
  • Serrano Martínez-Santos, Nicolás
  • Khoury, Ihab
This paper shows how the nowadays prevalent technology used in HTR borrows concepts and methods from the field of ASR; i.e. those based on Hidden Markov Models (HMMs). Additionally, it will be described a HTR approach based on employing Bernoulli distributions rather than Gaussian-Mixture distributions for the HMM-state emission probability of observations. Finally, handwritten text recognition evaluation results are reported for several corpora involving different characteristics and languages., Work supported by the EC (FEDER), the Spanish MEC under the MIPRCV “Consolider Ingenio 2010” research programme (CSD2007- 00018) and the Spanisg Government (MICINN and “Plan E”) under the MITTRAL (TIN2009-14633-C03-01) research project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Data consistency: toward a terminological clarification

  • Decker, Hendrik
  • Misra, Sanjay
  • Muñoz-Escoí, Francesc D.|||0000-0002-7216-9249
Consistency is an inconsistency are ubiquitous term in data engineering. Its relevance to quality is obvious, since consistency is a commonplace dimension of data quality. However, connotations are vague or ambiguous. In this paper, we address semantic consistency, transaction consistency, replication consistency, eventual consistency and the new notion of partial consistency in databases. We characterize their distinguishing properties, and also address their differences, interactions and interdependencies. Partial consistency is an entry door to living with inconsistency, which is an ineludible necessity in the age of big data., Decker and F.D. Muñoz—supported by the Spanish MINECO grant TIN 2012-37719-C03-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Automatic deployment of a consensus networks MAS

  • Gómez ., Yolanda
  • Palomares Chust, Alberto|||0000-0002-4583-467X
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
  • Rebollo Pedruelo, Miguel|||0000-0002-5115-8751
The main goal of the work here presented is the easy deployment in real multi-agent systems of consensus processes. MAGENTIX2 agent platform has been used to implement real agents that follow the consensus algorithm to reach agreements., This work is supported by TIN2012-36586-C03-01 and PROMETEO/2008/051 projects of the Spanish government, CONSOLIDER-INGENIO 2010 under grant CSD2007-00022, and PAID-06-11-2084
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Optimizations on semantic environment management: an application for humanoid robot home assistance

  • Munera Sánchez, Eduardo
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
  • Simó Ten, José Enrique|||0000-0003-4677-7627
This article introduces some optimization mechanisms focused on environment management, object recognition, and environment interaction. Although the generality of the presented system, this work will be focused on its application on home assistance humanoid robots. For this purpose, a generic environment formalization procedure for semantic scenery description is introduced. As the main contribution of this work, some techniques for a more efficient use of the environment knowledge are proposed. That way, the application of an areabased discrimination mechanism will avoid to process large amounts of data, useless in the current context, improving the object recognition, and characterizing the available interactions in the current area. Finally, the formalized description, and the optimization procedure, will be tested and verified on a specific home scenario using a humanoid robot, This work has been supported by the Spanish Science and Innovation Ministry MICINN under the CICYT project COBAMI: DPI2011-28507-C02-01/02. The responsibility for the content remains with the authors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

A Hierarchical Hybrid Architecture for Mission-Oriented Robot Control

  • Muñoz Alcobendas, Manuel
  • Munera Sánchez, Eduardo
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
  • Simó Ten, José Enrique|||0000-0003-4677-7627
In this work is presented a general architecture for a multi physical agent network system based on the coordination and the behaviour management. The system is organised in a hierarchical structure where are distinguished the individual agent actions and the collective ones linked to the whole agent network. Individual actions are also organised in a hybrid layered system that take advantages from reactive and deliberative control. Sensing system is involved as well in the behaviour architecture improving the information acquisition performance., This work has been partially supported by the Spanish Ministry of Economy and Competitiveness under the CICYT project Mission Based Control (COBAMI): DPI2011-28507-C02-02, under coordinated project High Integrity Partitioned Embedded Systems (Hi-PartES): TIN2011-28567-C03-03, and under the collaborative research project supported by the European Union MultiPARTES Project: FP7-ICT 287702. 2011-14.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

La red social como ejemplo de participación: casos y cuestiones

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
La utilización cada vez más frecuente de la Web. 2.0, permitiendo el intercambio de contenidos, así como la participación por parte de los usuarios plantea diferentes cuestiones. Si realizamos un estudio de la red social como instrumento de participación y lo aplicamos a un sector, por ejemplo, los medios de comunicación, nos damos cuenta de que se aumenta la información, pero también se fracciona la misma, ya que se produce una selección de los contenidos. Diferentes casos de estudio se darán cita en nuestra reflexión., Este trabajo ha sido desarrollado en el marco del Proyecto de Investigación Fundamental no orientada, VI Plan Nacional, Ministerio de Ciencia e Innovación. Subprograma de Proyectos de Investigación Fundamental no orientada. Título: ―Las libertades informativas en el contexto de la web 2.0 y las redes sociales: redefinición, garantías y límites‖. Referencia: DER2009-14519-C05-01 (SUBPROGRAMA JURI), Proyecto de Investigación financiado por el Vicerrectorado de Investigación de la UPV. Convocatoria del Programa de Apoyo a la Investigación y Desarrollo de la UPV para Primeros Proyectos de Investigación (PAID-06-08-2431); y Proyecto de I+D+I de la Generalitat Valenciana para grupos de investigación emergentes 2009. Referencia: GV/2009/020.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Easy Development and Use of Dialogue Services

  • Durán, José Javier
  • Fernández, Alberto
  • Rodríguez, Sara
  • Billhardt, Holger
  • Julian, Vicente|||0000-0002-2743-6037
We present a framework for Dialogue-Based Web Services (DBWS), i.e. services that require several message exchanges during their execution. Service development is simplified with the use of script languages and abstracting the communication layer. Service advertisements are carried out with a semantic Web Service directory with search and reputation capabilities. Execution can be performed from a mobile user interface that includes capabilities for user assistance. Our framework aims at filling the gap between services and non-IT users/experts. An example illustrates our proposal., Work partially supported by the Spanish Ministry of Science and Innovation through the project ”AT” (grant CSD2007-0022; CONSOLIDER-INGENIO 2010) and by the Spanish Ministry of Economy and Competitiveness through the project iHAS (grant TIN2012-36586-C03-01/02/03).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Structural graph extraction from images

  • Gallego-Sánchez, Antonio-Javier
  • Calera Rubio, Jorge
  • López Rodríguez, Damián|||0000-0003-3633-3862
We present three new algorithms to model images with graph primitives. Our main goal is to propose algorithms that could lead to a broader use of graphs, especially in pattern recognition tasks. The first method considers the q-tree representation and the neighbourhood of regions. We also propose a method which, given any region of a q-tree, finds its neighbour regions. The second algorithm reduces the image to a structural grid. This grid is postprocessed in order to obtain a directed acyclic graph. The last method takes into account the skeleton of an image to build the graph. It is a natural generalization of similar works on trees [8, 12]. Experiments show encouraging results and prove the usefulness of the proposed models in more advanced tasks, such as syntactic pattern recognition tasks., This work is partially supported by Spanish MICINN (contract TIN2011-28260-C03-01, contract TIN2009-14205-C04-C1) and CONSOLIDER-INGENIO 2010 (contract CSD2007-00018)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Wikipedia vandalism detection: combining natural language, metadata, and reputation features

  • Adler, B. Thomas
  • Alfaro, Luca de
  • Mola Velasco, Santiago Moisés
  • West, Andrew G
  • Rosso, Paolo|||0000-0002-8922-1242
Wikipedia is an online encyclopedia which anyone can edit. While most edits are constructive, about 7% are acts of vandalism. Such behavior is characterized by modifications made in bad faith; introducing spam and other inappropriate content. In this work, we present the results of an effort to integrate three of the leading approaches to Wikipedia vandalism detection: a spatio-temporal analysis of metadata (STiki), a reputation-based system (WikiTrust), and natural language processing features. The performance of the resulting joint system improves the state-of-the-art from all previous methods and establishes a new baseline for Wikipedia vandalism detection. We examine in detail the contribution of the three approaches, both for the task of discovering fresh vandalism, and for the task of locating vandalism in the complete set of Wikipedia revisions., The authors from Universitat Politècnica de València thank also the MICINN research project TEXT-ENTERPRISE 2.0 TIN2009-13391-C04-03 (Plan I+D+i). UPenn contributions were supported in part by ONR MURI N00014-07-1-0907. This research was partially supported by award 1R01GM089820-01A1 from the National Institute Of General Medical Sciences, and by ISSDM, a UCSC-LANL educational collaboration.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Sequential and Simultaneous Algorithms to Solve the Collision-Free Trajectory Planning Problem for Industrial Robots - Impact of Interpolation Functions and the Characteristics of the Actuators on Robot Performance

  • Rubio Montoya, Francisco José|||0000-0003-3465-702X
  • Besa Gonzálvez, Antonio José|||0000-0002-7084-9937
  • Pedrosa, Ana M.|||0000-0001-8069-5620
  • Valero Chuliá, Francisco José
This paper has been possible thanks to the funding of Science and Innovation Ministry of the Spain Government by means of the Researching and Technologic Development Project DPI2010-20814-C02-01 (IDEMOV).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Analysis of challenges of digital service enabled by big data analytics technologies using a new integrated multiple-criteria decision-making (MCDM) method

  • Saberi, Sara
  • Mardani, Abbas
[EN] The digitalization of services and products is an approach adopted by modern companies to produce value. The key to success is knowing what your customers are saying about your company by compiling data in many aspects and reviewing the digital content collected from digitally enabled services. On the other hand, text review is a highly subjective task. The raw data has complex features, making analyzing the data on digital services a very complex and intriguing problem. This study collects the main challenges of digitally enabled services to offer an inclusive framework and describes the framework's potential in dealing with application-specific challenges. This study aims to suggest a data-driven decision-making model using the “intuitionistic fuzzy sets (IFSs)”, “method based on the removal effects of criteria (MEREC)”, “rank sum (RS), and the “multi-attribute multi-objective optimization with ratio analysis (MULTIMOORA)” approaches. The IFMEREC-RS tool computes the weights of the digital service challenges that big data analytics technologies enable and the IF-MULTIMOORA method prioritizes the technologies to assess the challenges. Then, an integrated decision-making framework is developed to investigate these challenges' subjective and objective weights using expert opinion. Using big data analytics, the proposed model can assess the preferences of technologies over different challenges., This study was supported by the research projects “FMNet: A network for rapid execution for scaling production of needed designs” funded by NSF grant : 2036917 and “MA Manufacturing Emergency Response Team (MERT) 2.0” project funded by EDA grant: 01-79
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Student Assessment in the Online Language Learning Materials Developed and Delivered Through the InGenio System

  • Sevilla Pavón, Ana Mercedes
  • Martínez Sáez, Antonio
  • De-Siqueira, J.M.|||0000-0002-4579-1147
[EN] Assessment, the "dynamic developmental process which develops and changes as the needs arise and as understanding of the process improves" ( Brown and Glasner 2003 , preface), is considered as one of the key aspects in education. The importance of assessment derives from both its infl uence in the way teachers and students address language teaching and learning and the changes it might introduce as far as methodologies, approaches and behaviour of all participants in the language learning process are concerned. The assessment process has a very important and remarkable effect on the way educators and learners face the whole teaching process. Therefore, specifi c adaptations and also general changes are made and are introduced into the classroom context as well as into the teaching methodologies with a view to facing the fi nal evaluation process in a more effi cient manner
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Simulation Study of the Effect of Decreasing Truck Traffic Flow on Safety on Almeria-Barcelona Corridor

  • Dadashova, Bahar
  • Arenas Ramirez, Blanca
  • González Fernandez, Camino
  • Aparicio Izquierdo, Francisco
[EN] In this paper the effect of truck traffic on road safety has been analyzed through simulation study. The main objective of the study is to quantify the effect of the decreasing average annual daily traffic of heavy duty vehicles (trucks) on road safety. As the road safety indicators the frequency road accidents is considered. The data used in the study were collected from one of the most crowded routes in Spain which connects Almeria (south-east) with Barcelona (northeast). The observed data covers year 2010 and were classified into 2 road types: dual carriageways and toll roads. The estimation was carried out using negative binomial model and Markov Chain Monte Carlo simulation. Using the estimation results new traffic scenarios were proposed where the traffic flow is assumed to change its values. A total of 33 scenarios were proposed and new accidents data were generated through MCMC sampling. The comparison of the simulated and observed accident data shows that the effect of decreasing truck traffic flow could meliorate road safety in the route. The simulation tool could be applied to evaluate the effects of freight modal shift from road to rail., This work has been carried out in the framework of the MODALTRAM - TRA2011- 28647-C02-01 Research Project "Development of an integrated methodology for the assessment of effects on Safety and Environment, for the road and rail modal shift", of the Spanish National Research Plan 2011-2014, Ministry of Economy and Competitiveness (MINECO). The authors would also like to thanks the Community of Madrid, that contributed to this work through the SEGVAUTO-TRIES-CM (S2013-MIT2713) Programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

A Comparison of Approaches for Measuring Cross-Lingual Similarity of Wikipedia Articles

  • Barrón Cedeño, Luis Alberto
  • Paramita, Monica Lestari
  • Clough, Paul
  • Rosso, Paolo|||0000-0002-8922-1242
Wikipedia has been used as a source of comparable texts for a range of tasks, such as Statistical Machine Translation and CrossLanguage Information Retrieval. Articles written in different languages on the same topic are often connected through inter-language-links. However, the extent to which these articles are similar is highly variable and this may impact on the use of Wikipedia as a comparable resource. In this paper we compare various language-independent methods for measuring cross-lingual similarity: character n-grams, cognateness, word count ratio, and an approach based on outlinks. These approaches are compared against a baseline utilising MT resources. Measures are also compared to human judgements of similarity using a manually created resource containing 700 pairs of Wikipedia articles (in 7 language pairs). Results indicate that a combination of language-independent models (char-ngrams, outlinks and word-count ratio) is highly effective for identifying cross-lingual similarity and performs comparably to language-dependent models (translation and monolingual analysis)., The work of the first author was in the framework of the Tacardi research project (TIN2012-38523-C02-00). The work of the fourth author was in the framework of the DIANA-Applications (TIN2012-38603-C02-01) and WIQ-EI IRSES (FP7 Marie Curie No. 269180) research projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Digital skills for workplace mentors in construction sector apprenticeships (CONDAP)

  • Cárcel-Carrasco, Javier|||0000-0003-2776-533X
  • Peñalvo-López, Elisa|||0000-0002-3143-822X
  • Llinares Millán, Jaime|||0000-0001-7286-6805
  • Valcuende Payá, Manuel Octavio|||0000-0002-9967-1554
[EN] Employers in the construction industry are regularly and increasingly reporting hiring difficulties, since the sector is experiencing a skills shortage in spite of numerous apprenticeship schemes. According to the European Construction Sector Observatory, the main reason of this skills shortage is two-fold: a) the inadequacy of VET provision, and b) the low attractiveness of the sector to young people, further hindered by the perception of its limited capacity for innovation. Correspondingly, modernising construction apprenticeships is crucial for the development of key skills and the improvement of the employability of young construction workers. Training the trainers and mentors to become more engaged and involved in the design of apprenticeships and to introduce new methods, digital tools, and innovative content during their teaching practices is essential to make training more flexible and effective. Such an approach could effectively address the misalignment between VET offerings and the demand for skills and innovation in the construction sector. This article shows the focus of the European project CONDAP, whose purpose is to improve learning in the construction sector., This work has been conducted within the framework of the CONDAP project "Digital skills for workplace mentors in construction sector apprenticeships" funded by the European Commission within the Key Action 2: Cooperation for innovation and the exchange of good practices, reference number 2018-1-UK01-KA202-048122.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Event Management Proposal for Distribution Data Service Standard

  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Simó Ten, José Enrique|||0000-0003-4677-7627
This paper presents a proposal to extend the event management subsystem of the Distribution Data Service standard (DDS). The proposal allows user to optimize the use of DDS in networked control systems (NCS). DDS offers a simple event management system based on message filtering. The aim of the proposal is to improve the event management with three main elements: Events, Conditions and Actions. Actions are the new element proposed. Actions perform basic operations in the middleware, discharging the process load of control elements. The proposal is fully compatible with the standard and can be easily added to an existing system. Proposal has been tested in a distributed mobile robot navigation system with interesting results., The study described in this paper is a part of the coordinated project COBAMI: Mission-based Hierarchical Control. Education and Science Department, Spanish Government. CICYT: MICINN: DP1201 1-28507-C02-01/02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Escritoire: A Multi-touch Desk with e-Pen Input for Capture, Management and Multimodal Interactive Transcription of Handwritten Documents

  • Martín-Albo Simón, Daniel
  • Romero Gómez, Verónica
  • Vidal, Enrique|||0000-0003-4579-5196
A large quantity of documents used every day are still handwritten. However, it is interesting to transform each of these documents into its digital version for managing, archiving and sharing. Here we present Escritoire, a multi-touch desk that allows the user to capture, transcribe and work with handwritten documents. The desktop is continuously monitored using two cameras. Whenever the user makes a specific hand gesture over a paper, Escritoire proceeds to take an image. Then, the capture is automatically preprocesses, obtaining as a result an improved representation. Finally, the text image is transcribed using automatic techniques and finally the transcription is displayed on Escritoire., This work was partially supported by the Spanish MEC under FPU scholarship (AP2010-0575), STraDA research project (TIN2012-37475-C02-01) and MITTRAL research project (TIN2009-14633-C03-01); the EU’s 7th Framework Programme under tranScriptorium grant agreement (FP7/2007-2013/600707).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

The CONDAP VOOC an autonomous modular course to improve skills, knowledge and competencies in sustainable construction

  • Cárcel-Carrasco, Javier|||0000-0003-2776-533X
  • Peñalvo-López, Elisa|||0000-0002-3143-822X
  • Palmero Iglesias, Luís Manuel|||0000-0003-0046-5134
  • Carnero, Maria
[EN] The CONDAP VOOC is a self-standing modular course for in-company mentors, who need to improve their skills, knowledge and competencies in sustainable construction using digital technologies in energy conservation and green generation. The CONDAP online course, was developed in the context of the third Intellectual Output, aiming to act as the main delivery method for the CONDAP curriculum and educational resources. The CONDAP VOOC, available in all partnership languages, has been grounded on evidence-based learning outcomes (coming out from extended labour market and skill needs analysis), reflects the structure of the developed curriculum as organized around learning units and lessons, and comprises (contextualized) the project’s training and assessment materials in an online form. It also integrates additional pedagogical resources such as video units, infographics, working assignments, and collaboration mechanisms to provide an optimal learning experience with increased collaboration opportunities. Overall, the CONDAP VOOC offers a modular, e-learning scheme, always available over the Internet, that supports the attainment of learning outcomes and places the “learner” at the heart of the educational process. The learner is given the flexibility to establish individuals learning goals and a personal learning path based on available content and materials., This work has been conducted within the framework of the CONDAP project "Digital skills for workplace mentors in construction sector apprenticeships" funded by the European Commission within the Key Action 2: Cooperation for innovation and the exchange of good practices, reference number 2018-1-UK01-KA202-048122.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Exploiting multiple ASR outputs for a spoken language understanding task

  • Calvo Lance, Marcos
  • García-Granada, Fernando|||0000-0003-2213-4213
  • Hurtado Oliver, Lluis Felip|||0000-0002-1877-0455
  • Jiménez-Serrano, Santiago|||0000-0003-2917-6053
  • Sanchís Arnal, Emilio|||0000-0002-6737-4723
In this paper, we present an approach to Spoken Language Understanding, where the input to the semantic decoding process is a composition of multiple hypotheses provided by the Automatic Speech Recognition module. This way, the semantic constraints can be applied not only to a unique hypothesis, but also to other hypotheses that could represent a better recognition of the utterance. To do this, we have developed an algorithm to combine multiple sentences into a weighted graph of words, which is the input to the semantic decoding process. It has also been necessary to develop a specific algorithm to process these graphs of words according to the statistical models that represent the semantics of the task. This approach has been evaluated in a SLU task in Spanish. Results, considering different configurations of ASR outputs, show the better behavior of the system when a combination of hypotheses is considered., This work is partially supported by the Spanish MICINN under contract TIN2011-28169-C05-01, and under FPU Grant AP2010-4193
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Developing Intelligent Virtual Environments using MAM5 Meta-Model

  • Rincón Arango, Jaime Andrés
  • Garcia Marques, Mª Emilia
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
An IVE (Intelligent Virtual Environment) is a virtual environment simulating a physical (or real) world, inhabited by autonomous intelligent entities[2]. Today, this kind of applications are between the most demanded ones, not only as being the key for multi-user games such as World Of Warcraft (with more than 7 million of users in 2013) but also for inmersive social networks such as Second Life (with 36 million accounts created in its 10 years of history). It is in the development of these huge IVEs where the need of a quick and easy-to-use modelling toolkit arises., This work is partíally supported by the TIN2012-36586-C03-01, PROMETEOII/2013/019 and the FPI grant AP2013-01276 awarded to Jaime-Andres Rincon.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

About Students’ Abstractions - Evaluation of Items Requiring Abstract Thinking Competence

  • Zehetmeier, Daniela
[EN] Abstract thinking is one of the most important competences in computer science. When starting my research, there was no complete definition of the competence nor was there a tool to assess first-semester students’ competence level. Thus, I developed a competence model of abstract thinking, which allowed me to derive an assessment tool. In this work, I will present first insights gained by analyzing the tests of 134 incoming students of computer science and scientific computing. The analysis confirms the assumption that incoming students often lack in this essential competence. Moreover, the overemphasis of the data aspect of classes in object oriented programming can be confirmed for university level education. Further investigations will follow. In the future, the insights gained can be used to develop teaching units or whole teaching concepts., This work was supported by the German Federal Ministry of Education and Research (BMBF), grant no. 01PL16025, as part of the “Qualit¨atspakt Lehre” (“Teaching Quality Initiative”) program. Thank you for your support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Monitoring critical infrastructure exposed to anthropogenic and natural hazards using satellite radar interferometry, Monitorización de infraestructuras críticas expuestas a riesgos naturales y antrópicos mediante interferometría radar de satélite

  • Ruiz-Armenteros, Antonio
  • Delgado-Blasco, José
  • Bakon, Matus
  • Lazecky, Milan
  • Marchamalo-Sacristán, Miguel
  • Lamas-Fernández, Francisco
  • Ruiz-Constán, Ana
  • Galindo-Zaldívar, Jesús
  • Sanz de Galdeano, Carlos
  • Martos-Rosillo, Sergio
  • Papco, Juraj
  • Perissin, Daniele
  • Sousa, Joaquim
[EN] Synthetic Aperture Radar Interferometry (InSAR) is a remote sensing technique very effective for the measure of smalldisplacements of the Earth’s surface over large areas at a very low cost as compared with conventional geodetictechniques. Advanced InSAR time series algorithms for monitoring and investigating surface displacement on Earth arebased on conventional radar interferometry. These techniques allow us to measure deformation with uncertainties of 1mm/year, interpreting time series of interferometric phases at coherent point scatterers (PS) without the need for humanor special equipment presence on the site. By applying InSAR processing techniques to a series of radar images over thesame region, it is possible to detect line-of-sight (LOS) displacements of infrastructures on the ground and therefore identifyabnormal or excessive movement indicating potential problems requiring detailed ground investigation. A major advantageof this technology is that a single radar image can cover a major area of up to 100 km by 100 km or more as, for example,Sentinel-1 C-band satellites data cover a 250 km wide swath. Therefore, all engineering infrastructures in the area, suchas dams, dikes, bridges, ports, etc. subject to terrain deformation by volcanos, landslides, subsidence due to groundwater,gas, or oil withdrawal could be monitored, reducing operating costs effectively. In this sense, the free and open accessCopernicus Sentinel-1 data with currently up to 6-days revisit time open new opportunities for a near real-time landmonitoring. In addition, the new generation of high-resolution radar imagery acquired by SAR sensors such as TerraSARX,COSMO-SkyMed, and PAZ, and the development of multi-interferogram techniques has enhanced our capabilities inrecent years in using InSAR as deformation monitoring tool. In this paper, we address the applicability of using spaceborneSAR sensors for monitoring infrastructures in geomatics engineering and present several cases studies carried out by ourgroup related to anthropogenic and natural hazards, as well as monitoring of critical infrastructures., [ES] La interferometría radar de apertura sintética (InSAR) es una técnica de teledetección muy eficaz para medir pequeños desplazamientos de la superficie terrestre en grandes áreas a un coste muy pequeño en comparación con las técnicas geodésicas convencionales. Los algoritmos avanzados de series temporales InSAR para monitorizar e investigar el desplazamiento de la superficie terrestre se basan en la interferometría radar convencional. Estas técnicas nos permiten medir la deformación con incertidumbres de un milímetro por año, interpretando series temporales de fases interferométricas en retrodispersores puntuales coherentes (PS) sin necesidad de presencia humana o de equipos especiales en el sitio. Al aplicar técnicas de procesamiento InSAR a una serie de imágenes radar de la misma región, es posible detectar desplazamientos de infraestructuras proyectados en la línea de vista del satélite (line-of-sight o LOS) y, por lo tanto, identificar movimientos anormales o excesivos que indiquen problemas potenciales que requieran una investigación detallada del terreno. Una de las principales ventajas de esta tecnología es que una sola imagen radar puede cubrir un área importante de hasta 100 km por 100 km o más, ya que, por ejemplo, los datos de los satélites de banda C Sentinel-1 cubren una franja de 250 km de ancho. Por lo tanto, todas las infraestructuras civiles de la zona, como presas, diques, puentes, puertos, etc., sujetas a deformaciones del terreno por actividad volcánica, deslizamientos de tierra, hundimientos por extracción de agua subterránea, gas o petróleo, podrían ser monitorizados, reduciendo los costes operativos de manera efectiva. En este sentido, los datos Sentinel-1 de Copernicus, de acceso abierto, con hasta 6 días de tiempo de revisión actual abren nuevas oportunidades para una monitorización terrestre casi en tiempo real. Además, la nueva generación de imágenes radar de alta resolución adquiridas por sensores SAR como TerraSAR-X, COSMOSkyMed y PAZ, y el desarrollo de técnicas multi-interferograma ha mejorado nuestras capacidades en los últimos años en el uso del InSAR como herramienta para el control de deformaciones. En este trabajo se aborda la aplicabilidad del uso de sensores SAR espaciales para la monitorización de infraestructuras civiles en ingeniería geomática y presentamos varios casos de estudio realizados por nuestro grupo relacionados con riesgos naturales y antrópicos, así como de monitorización de infraestructura crítica., ERS-1/2 and Envisat datasets were provided by the European Space Agency (ESA). Sentinel-1A/B data were freely provided by ESA through Copernicus Programme. Data have been processed by DORIS (TUDelft), StaMPS (Andy Hooper), SARPROZ (Copyright (c) 2009-2020 Daniele Perissin), and SNAP (ESA). The satellite orbits are from TUDelft and ESA, as well as from the ESA Quality Control Group of Sentinel-1. Research was supported by [ESA Research and Service Support] for providing hardware resources employed in this work; [Spanish Ministry of Economy, Industry and Competitiveness] under ReMoDams project ESP2017-89344-R (AEI/FEDER, UE); [University of Jaén (Spain)] under PAIUJA-2021/2022 and CEACTEMA; [Junta de Andalucía (Spain)] under RNM-282 research group; [ERDF through the Operational Programme for Competitiveness and Internationalisation - COMPETE 2020 Programme] within project «POCI-01-0145-FEDER006961»; [National Funds through the FCT – Fundação para a Ciência e a Tecnologia (Portuguese Foundation for Science and Technology)] as part of project UID/EEA/50014/2013; [The Ministry of Education, Youth and Sports from the National Programme of Sustainability (NPU II)] under project «IT4Innovations excellence in science - LQ1602» (Czech Republic); and [Slovak Grant Agency VEGA] under projects No. 2/0100/20
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

I-VDE: A Novel Approach to Estimate Vehicular Density by Using Vehicular Networks

  • Barrachina Villalba, Javier
  • Garrido Picazo, María Piedad
  • Fogue, Manuel
  • Martínez, Francisco J.
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Manzoni, Pietro|||0000-0003-3753-0403
Road traffic is experiencing a drastic increase in recent years, thereby increasing the every day traffic congestion problems, especially in cities. Vehicle density is one of the main metrics used for assessing the road traffic conditions. Currently, most of the existing vehicle density estimation approaches, such as inductive loop detectors or traffic surveillance cameras, require infrastructure-based traffic information systems to be installed at various locations. In this paper, we present I-VDE, a solution to estimate the density of vehicles that has been specially designed for Vehicular Networks. Our proposal allows Intelligent Transportation Systems to continuously estimate the vehicular density by accounting for the number of beacons received per Road Side Unit, as well as the roadmap topology. Simulation results indicate that our approach accurately estimates the vehicular density, and therefore automatic traffic controlling systems may use it to predict traffic jams and introduce countermeasures., This work was partially supported by the Ministerio de Ciencia e Innovaci´on, Spain, under Grant TIN2011-27543-C03-01, as well as by the Fundaci´on Universitaria Antonio Gargallo (FUAG), and the Caja de Ahorros de la Inmaculada (CAI)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Análisis DAFO creativo colaborativo para desarrollar la competencia de innovación, creatividad y emprendimiento

  • Badía Valiente, José David
  • Teruel-Juanes, Roberto|||0000-0002-0190-4445
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] This paper describes the development and application of a collaborative and creative SWOT analysis (Strengths Weaknesses-Threats-Oportunidades) as an effective technique to develop the innovation, creativity and entrepreneurship skill. In this sense, the use of ICT resources such as the spreadsheet by Google offers a tool with a visual organization of information, a high capacity of accessibility and multi-user synchronous editing, which supports the transformation of the SWOT analysis in a SWOT analysis collaborative. In addition, the development of techniques that enhance lateral thinking creativity through mental processes of decomposition allows the transformation of a collaborative SWOT analysis into a collaborative creative SWOT analysis. The application of this model was carried out in a session of training of trainers in the context of a European project Erasmus+ Strategic Partnerships. It is based on four consecutive rotations around the SWOT matrix, promoting four mental "clicks" in each rotation: (i) Objective: electricity consumption, hydraulic power, wind turbine, solar oven; (ii) Focus: educational, technical; (iii) Perspective place: internal-external; (iv) Evaluation: positive-negative. The development of the intrinsic motivation inherent to this technique enhances the development of creativity, innovation and entrepreneurship skill., [ES] En este trabajo redescribe el desarrollo y aplicación un análisis DAFO (Debilidades-Amenazas-Fortalezas-Oportunidades) creativo colaborativo como una técnica efectiva para desarrollar la competencia de innovación, creatividad y emprendimiento. En este sentido, el uso de la hoja de cálculo de Google como herramientas TIC de organización visual de la información, con alta capacidad de accesibilidad y de edición multi-usuario síncrona sirve para apoyar la transformación del análisis DAFO en un análisis DAFO colaborativo. Además, se aplican técnicas de desarrollo de la creatividad que potencian el pensamiento lateral a través de procesos mentales de descomposición y analogía que permiten transformar el análisis DAFO colaborativo en un análisis DAFO creativo colaborativo. El modelo de aplicación se realizó en una sesión de formación de formadores en el contexto de un proyecto europeo de Asociaciones Estratégicas Erasmus+. Se basa en cuatro rotaciones consecutivas alrededor de la matriz DAFO propiciando con cada rotación 4 “clicks” mentales: (i) Objetivo: consumo eléctrico, central hidráulica, aerogenerador, horno solar; (ii) Enfoque: pedagógico, técnico; (iii) Perspectiva lugar: interno-externo; (iv) Perspectiva evaluación: positivo-negativo. El desarrollo de la motivación intrínseca inherente a esta metodología redunda en las capacidades de desarrollo de competencias de creatividad, innovación y emprendimiento., Los autores agradecen la ayuda de la Comisión europea a través del proyecto de asociaciones estratégicas Eramus+ KA2 My Smart School. Formative Methodologies of Creativity and TICs to Face Societal Challengues at the School (2015-1-FR01-KA201- 015274), y a la Universitat Politècnica de València, por su apoyo a través del Proyecto de Innovación en Metodologías Educativas “Análisis de la Implementación y Evaluación de las Competencias Transversales en los Primeros Cursos de Ingeniería” PIME /2014/ A/020A
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

The Challenge of Detection and Diagnosis of Fugacious Hardware Faults in VLSI Designs

  • Espinosa García, Jaime
  • de-Andrés-Martínez, David|||0000-0002-4744-3795
  • Ruiz, Juan Carlos|||0000-0001-7678-3513
  • Gil, Pedro|||0000-0002-9364-7385
Current integration scales are increasing the number and types of faults that embedded systems must face. Traditional approaches focus on dealing with those transient and permanent faults that impact the state or output of systems, whereas little research has targeted those faults being logically, electrically or temporally masked -which we have named fugacious. A fast detection and precise diagnosis of faults occurrence, even if the provided service is unaffected, could be of invaluable help to determine, for instance, that systems are currently under the influence of environmental disturbances like radiation, suffering from wear-out, or being affected by an intermittent fault. Upon detection, systems may react to adapt the deployed fault tolerance mechanisms to the diagnosed problem. This paper explores these ideas evaluating challenges and requirements involved, and provides an outline of potential techniques to be applied., This work has been funded by Spanish Ministry of Economy ARENES project (TIN2012-38308-C02-01)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

A hybrid approach for transliterated word-level language identification: CRF with post processing heuristics

  • Banerjee, Somnath
  • Kuila, Alapan
  • Roy, Aniruddha
  • Naskar, Sudip Kumar
  • Bandyopadhyay, Sivaji
  • Rosso, Paolo|||0000-0002-8922-1242
[EN] In this paper, we describe a hybrid approach for word-level language (WLL) identification of Bangla words written in Roman script and mixed with English words as part of our participation in the shared task on transliterated search at Forum for Information Retrieval Evaluation (FIRE) in 2014. A CRF based machine learning model and post-processing heuristics are employed for the WLL identification task. In addition to language identification, two transliteration systems were built to transliterate detected Bangla words written in Roman script into native Bangla script. The system demonstrated an overall token level language identification accuracy of 0.905. The token level Bangla and English language identification F-scores are 0.899, 0.920 respectively. The two transliteration systems achieved accuracies of 0.062 and 0.037. The word-level language identification system presented in this paper resulted in the best scores across almost all metrics among all the participating systems for the Bangla-English language pair., We acknowledge the support of the Department of Electronics and Information Technology (DeitY), Government of India, through the project “CLIA System Phase II”. The research work of the last author was carried out in the framework of WIQ-EI IRSES (Grant No. 269180) within the FP 7 Marie Curie, DIANA-APPLICATIONS (TIN2012-38603-C02-01) projects and the VLC/CAMPUS Microcluster on Multimodal Interaction in Intelligent Systems.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

METODOLOGÍA DE CALIBRACIÓN DE DOS MODELOS DE SIMULACIÓN DEL TRANSPORTE DE AGUA EN EL SUELO EN CULTIVOS HORTÍCOLAS

  • Sánchez de Oleo, C
  • Jaramillo Gonzalez, Claudia Ximena
  • Illera Gómez, Iván
  • Ramos Mompó, Carlos
  • Lidón, Antonio|||0000-0002-0455-4348
  • Ginestar Peiro, Damián|||0000-0003-1243-6648
[ES] El uso de modelos de simulación de la dinámica del agua en el suelo requiere del conocimiento de un gran número de parámetros, algunos de los cuales son difíciles de medir y es necesaria su calibración a partir de medidas experimentales. Por ello, es conveniente elegir aquellos parámetros que mayor incidencia tienen en los procesos a estudiar, simplificando con ello el proceso de calibración del modelo. En este trabajo se propone la utilización de métodos de análisis de sensibilidad global para determinar los parámetros más influyentes en los errores de la predicción del contenido de humedad del suelo de dos modelos de simulación con diferente grado de complejidad, LEACHM y EU-Rotate_N. Se ha hecho uso de los valores medidos de la humedad del suelo en dos ensayos de cultivo de coliflor en dos años consecutivos, utilizando los datos del primer ensayo para la calibración de ambos modelos y los datos del segundo ensayo para evaluar la capacidad predictiva de los mismos una vez calibrados. Los resultados muestran que es posible obtener buenas predicciones calibrando solo un número reducido de parámetros., Este trabajo ha sido subvencionado parcialmente por el Ministerio de Economía y Competitividad mediante el proyecto INIA-RTA 2011–00136-C04-01.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Language identification for interactive handwriting transcription of multilingual documents

  • Del Agua Teba, Miguel Angel
  • Serrano Martinez Santos, Nicolas
  • Juan, Alfons|||0000-0002-9984-4072
An effective approach to handwriting transcription of (old) documents is to follow a sequential, line-by-line transcription of the whole document, in which a continuously retrained system interacts with the user. In the case of multilingual documents, however, a minor yet important issue for this interactive approach is to first identify the language of the current text line image to be transcribed. In this paper, we propose a probabilistic framework and three techniques for this purpose. Empirical results are reported on an entire 764-page multilingual document for which previous empirical tests were limited to its first 180 pages, written only in Spanish. © 2011 Springer-Verlag., Work supported by the EC (FEDER, FSE), the Spanish Government (MICINN, MITyC, “Plan E”, under grants MIPRCV “Consolider Ingenio 2010”, MITTRAL TIN2009- 14633-C03-01 and FPU AP2007-02867), the Generalitat Valenciana (grant Prometeo/2009/014 and ACOMP/2010/051) and the UPV (grant 20080033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Enseñanza del aprendizaje por refuerzo con un sencillo ejemplo de minimización de funciones

  • Arnau, Roger|||0000-0003-2544-8875
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Calabuig, J. M.|||0000-0001-8398-8664
  • Sánchez Pérez, Enrique Alfonso|||0000-0001-8854-3154
[ES] En este trabajo se presenta una sesión a modo de taller orientada al estudiantado universitarios para que entiendan los fundamentos del aprendizaje por refuerzo (RL). Esta técnica de inteligencia artificial no es comúnmente estudiada por su dificultad, por ello se expone una simplificación del RL, que se aplica a la resolución de un problema de optimización. Además se analizará la manera de abordar el problema de optmización como un juego, puesto que este es una aplicación natural del RL., [EN] This paper presents a practical session for university students to introduce them on the fundamentals of reinforcement learning (RL). The difficulty of this technique means that it is not studied, so a simplification of RL is presented, which is applied to the solution of an optimization problem. In addition to this technique, we study how to approach the optimization problem as a game, since this is a natural application of RL., Proyectos financiados por la Universitat Politècnica de València (PAID-01-21), el Ministerio de Ciencia e Innovación (PID2020-112759GB-I00) y Polish National Agency for Strategic Partnership (BPI/PST/2021/1/00031/U/00001)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Introduction

  • Harriss, Harriet
  • Marcaccio, Roberta
  • Barosio, Michela
  • Boutsen, Dag
  • Ceko, Andrea
  • De Walshe, Johan
  • Gomes, Santiado
  • Roth-Cerina, Mia
  • Van Reusel, Hanne
  • Vanucchi, Federica
  • Sentieri Omarrementeria, Carla|||0000-0002-1156-5053
[EN] At first reading, the Architecture's Afterlife study appears to focus upon the travails of one specific discipline, that of architecture. However, it offers both a methodology for other disciplines to assess their own qualification mobility, and generated findings that impact all disciplinary pedagogy, all professions, and across education and economic policy, too. One of the reasons why a study focusing on architecture graduates¿ trans-sector impact can provide insights into the transversal performance of all discipline-situated skills, is due to architecture¿s unique, epistemological origins (meaning the knowledge frameworks). Architecture's deep connectivity to other disciplines spans across both the arts and humanities and what are also characterised as STEM disciplines (Science, Technology, Engineering and Mathematics) currently considered a "priority" for Europe to address skills shortages. Architecture is therefore in a unique position to be a source of valuable insights for a range of other disciplines.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

On the detection of SOurce COde re-use

  • Flores Sáez, Enrique
  • Moreno Boronat, Lidia Ana
  • Villatoro-Tello, Esaú
  • Rosso, Paolo|||0000-0002-8922-1242
This paper summarizes the goals, organization and results of the first SOCO competitive evaluation campaign for systems that automatically detect the source code re-use phenomenon. The detection of source code re-use is an important research field for both software industry and academia fields. Accordingly, PAN@FIRE track, named SOurce COde Re-use (SOCO) focused on the detection of re-used source codes in C/C++ and Java programming languages. Participant systems were asked to annotate several source codes whether or not they represent cases of source code re-use. In total five teams submitted 17 runs. The training set consisted of annotations made by several experts, a feature which turns the SOCO 2014 collection in a useful data set for future evaluations and, at the same time, it establishes a standard evaluation framework for future research works on the posed shared task., PAN@FIRE (SOCO) has been organised in the framework of WIQ-EI (EC IRSES grantn. 269180) and DIANA-APPLICATIONS (TIN2012-38603-C02- 01) research projects. The work of the last author was supported by CONACyT Mexico Project Grant CB-2010/153315, and SEP-PROMEP UAM-PTC-380/48510349.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Betão auto-compactável com resíduo agroindustrial

  • Petermann Moretti, Juliana
  • Nunes, Sandra
  • Sales, Almir
[PT] A cinza que resulta da queima do bagaço da cana-de-açúcar (ACBC) é um resíduo agroindustrial gerado em larga escala no Brasil. Como alternativa de aplicação desse material, neste trabalho foi desenvolvido um betão auto-compactável (BAC) com a incorporação da ACBC. O programa experimental foi realizado segundo um plano fatorial em argamassas para optimizar a composição da pasta, que posteriormente foi verificada ao nível do betão. Foram adotados quatro parâmetros da mistura como variáveis independentes, nomeadamente, as relações água/cimento , água/finos, superplastificante/finos e ACBC/cimento. Após a definição das composições, diversas misturas de argamassa foram produzidas e realizaram-se os seguintes testes: espalhamento, fluidez, resistividade elétrica, resistência à compressão e porosidade acessível à água. Através de uma análise de regressão multilinear foram ajustados modelos numéricos aos dados experimentais. Por fim, foi possível optimizar uma mistura visando maximizar o teor de ACBC e atender aos requisitos de autocompactabilidade e durabilidade. Após essa etapa, foi produzido e caraterizado um BAC mantendo a composição da pasta. Por meio dos resultados obtidos pode-se concluir que a ACBC possui potencial para ser incorporada na fração dos finos na produção de BAC., Os autores agradecem o programa EBW+ pela bolsa concedida, o CONSTRUCT/LABEST / FEUP, a engenheira Paula Silva e o técnico Cláudio Ferraz pelo suporte nos testes laboratoriais, o PPGECIV / UFSCar, o Instituto de Pesquisas Tecnológicas de São Paulo –IPT e a empresa Raízen pela doação da ACBC. Este trabalho foi financiado por: Projeto POCI-01-0145-FEDER-007457- CONSTRUCT – Instituto de I&D em Estruturas e Construções – financiado pelo Fundo europeu de Desenvolvimento Regional (FEDER), através do COMPETE2020 – Programa Operacional Competitividade e Internacionalização (POCI) e por fundos nacionais através da Fundação para a Ciência e a Tecnologia I.P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Deep Teaching: Materials for Teaching Machine and Deep Learning

  • Herta, Christian
  • Voigt, Benjamin
  • Baumann, Patrick
  • Strohmenger, Klaus
  • Jansen, Christoph
  • Fischer, Oliver
  • Zhang, Gefei
  • Hufnagel, Peter
[EN] Machine learning (ML) is considered to be hard because it is relatively complicated in comparison to other topics of computer science. The reason is that machine learning is based heavily on mathematics and abstract concepts. This results in an entry barrier for students: Most students want to avoid such difficult topics in elective courses or self-study. In the project Deep.Teaching we address these issues: We motivate by selected applications and support courses as well as self-study by giving practical exercises for different topics in machine learning. The teaching material, provided as jupyter notebooks, consists of theoretical and programming sections. For didactical reasons, we designed programming exercises such that the students have to deeply understand the concepts and principles before they can start to implement a solution. We provide all necessary boilerplate code such that the students can primarily focus on the educational objectives of the exercises. We used different ways to give feedback for self-study: obscured solutions for mathematical results, software tests with assert statements, and graphical illustrations of sample solutions. All of the material is published under a permissive license. Developing jupyter notebooks collaboratively for educational purposes poses some problems. We address these issues and provide solutions/best practices., The project Deep.Teaching is funded by the German National Ministry of Education and Research (BMBF), project number 01IS17056.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Concept of heat recovery in drying with chemical heat pump

  • Tylman, Michal
  • Jaskulski, Maciej
  • Wawrzyniak, Pawel
  • Czapnik, M.
[EN] Drying is one of the most energy intensive unit operations. It easily accounts for up to 15% of all industrial energy consumption. In the most drying processes heat is required to evaporate moisture which is later removed with a flow of air. The hot, humid air leaving the dryer is often considered as a waste stream, and a large fraction of energy is lost. The aim of the theoretical and experimental concept study presented here was to evaluate a method of reclaiming energy from low temperature waste streams and converting it to useful in industry saturated steam of temperature from 120 to 150 °C. Chemical heat pump concept based on the dilution and concentration of phosphoric acid was used to test the method in the laboratory. Heat of dilution and energy needed for water evaporation from the acid solution were experimentally measured. The cycle of successive processes of dilution and concentration has been experimentally confirmed. Theoretical model of the chemical heat pump was tested and coefficient of performance measured. Energy balance of the drying system and efficiency increase of the dryer supported with chemical heat pump were calculated., The authors wish to acknowledge the support of the Chemat Sp. z o.o. and Nationa Centre for Research and Development (POIR.01.01.01-00-0809/17-00) for this study.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Thinking outside the box - Virtual, intercultural labs in engineering education

  • Salzinger, Julia
  • Kurniawati, Ika
  • Abrahamczyk, Lars
  • Höffer, Rüdiger
[EN] An important part of engineering education is specific training in laboratories. If done properly, such a hands-on approach is much more effective than pure lectures, where knowledge is only passively absorbed. The traditional lab is usually on-site, requires students to be on campus, and learning content is restricted to the particular focus of that institution. For this reason, five European universities formed a partnership and developed a joint platform that offers experiments conducted in virtual labs. This way students profit from the expertise of different institutions, while gaining intercultural work experience. Additionally, virtual labs reduce the immense expense of student mobility, are more inclusive towards minority groups and reduce costs of universities in the long term. Virtual labs have shown to be an effective way to improve engineering education for students and teaching staff alike., The the authors gratefully acknowledge the financial support from the Erasmus Plus - Project PARFORCE (grant no. 2016-1-DE01-KA203-002905), the methodological support from the Center for Teaching and Learning (ZfW), and the eLearning team of the Ruhr-Universität Bochum as well as from the eLearning Lab of the Bauhaus-Universität Weimar supported by the eTeach Network Thuringia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

From the Queue to the Quality of Service Policy: A Middleware Implementation

  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Simó Ten, José Enrique|||0000-0003-4677-7627
Quality of service policies in communications is one of the current trends in distributed systems based on middleware technology. To implement the QoS policies it is necessary to define some common parameters. The aim of the QoS policies is to optimize the user defined QoS parameters. This article describes how to obtain the common QoS parameters using message queues for the communications and control components of communication. The paper introduces the Queue-based Quality of Service Cycle concept for each middleware component. The QoS parameters are obtained directly from the queue parameters, and Quality of Service Policies controls directly the message queues to obtain the user-defined parameters values., The middleware architecture described in this article is a part of the coordinated project SIDIRELI: Distributed Systems with Limited Resources. Control Kernel and Coordination. Education and Science Department, Spanish Government. CICYT: MICINN: DPI2008-06737-C02-01/02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Congestion Control for Vehicular Environments by Adjusting IEEE 802.11 Contention Window Size

  • Balador, Ali
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
Medium access control protocols should manage the highly dynamic nature of Vehicular Ad Hoc Networks (VANETs) and the variety of application requirements. Therefore, achieving a well-designed MAC protocol in VANETs is a challenging issue. The contention window is a critical element for handling medium access collisions in IEEE 802.11, and it highly affects the communications performance. This paper proposes a new contention window control scheme, called DBM-ACW, for VANET environments. Analysis and simulation results using OMNeT++ in urban scenarios show that DBM-ACW provides better overall performance compared with previous proposals, even with high network densities., This work was partially supported by the Ministerio de Ciencia e Innovación, Spain, under Grant TIN2011-27543-C03-01
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Using dynamic, full cache locking and genetic algorithms for cache size minimization in multitasking, preemptive, real-time systems

  • Martí-Campoy, Antonio|||0000-0002-6009-8703
  • Rodríguez-Ballester, Francisco|||0000-0002-4087-5077
  • Ors Carot, Rafael|||0000-0003-2787-4683
Cache locking have shown during the last years their usefulness easing the schedulability analysis of multitasking, preemptive, real-time systems. Cache locking provides a high degree of predictability while system performance is maintained at a similar level to that provided by regular, highly unpredictable, non-locked cache. Cache locking may also be useful to reduce hardware costs by means of reducing the size of the cache memory needed to make a real-time system schedulable.This work shows how full, dynamic cache locking may help to reduce the size of the cache memory versus a regular cache. This reduction is possible thanks to a genetic algorithm that selects the set of instructions that have to be locked in cache to provide the maximum cache size minimization while keeping the system schedulable., This work is partially supported by PAID-06-11/2055 of Universitat Politècnica de València and TIN2011-28435-C03-01 of Ministerio de Ciencia e Innovación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Knowledge Graphs as Context Models: Improving the Detection of Cross-Language Plagiarism with Paraphrasing

  • Franco-Salvador, Marc
  • Gupta, Parth
  • Rosso, Paolo|||0000-0002-8922-1242
Cross-language plagiarism detection attempts to identify and extract automatically plagiarism among documents in different languages. Plagiarized fragments can be translated verbatim copies or may alter their structure to hide the copying, which is known as paraphrasing and is more difficult to detect. In order to improve the paraphrasing detection, we use a knowledge graph-based approach to obtain and compare context models of document fragments in different languages. Experimental results in German-English and Spanish-English cross-language plagiarism detection indicate that our knowledge graph-based approach offers a better performance compared to other state-of-the-art models., The research has been carried out in the framework of the European Commission WIQ-EIIRSES (no. 269180) and DIANA-APPLICATIONS - Finding Hidden Knowledge in Texts:Applications (TIN2012-38603-C02-01) projects as well as the VLC/CAMPUS Microcluster on Multimodal Interaction in Intelligent Systems.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Design of forces driving adaptation of agent organizations

  • Esparcia García, Sergio
  • Boissier, Olivier
  • Argente, Estefanía|||0000-0002-5431-3868
Adaptation is an important feature of human organizations. Being able to change allows them not only to survive, but to evolve to get new advantages from new situations happening in their environment or from inside the organization. The same way human organizations do, agent organizations should be able to adapt. Even if adaptation is addressed in the literature, it lacks the ability to clearly manage the reasons for change. These reasons are known in the social science bibliography as forces that drive the organizational change. These forces were introduced in a previous work in the computational domain, but only for the analysis phase of the engineering of agents organizations. In this work, a set of templates is presented to define these forces at design time. These templates have been applied in the design of components for detecting the ‘obtaining resources’ force, which have been implemented using Jason agents and CArtAgO artifacts within an agent organization., This work is supported by the MINECO/FEDER grant TIN2012-36586-C03-01, the TIN2009-13839-C03-01 project of the Spanish government, and CONSOLIDER-INGENIO 2010 under grant CSD2007-00022.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Tourist settlements in the Comunidad Valenciana coast: A Typological Map

  • Azulay Tapiero, Marilda|||0000-0001-7436-8754
  • Mas Llorens, Vicente
[EN] The system of tourist settlements on the Mediterranean coast presents a great complexity, as well as its geographical, landscape, morphological, urban and architectural conditions like for the varied way of relating to it the social and economic groups involved. The purpose of the communication is to expose the research about the need and the possibility of actions providing tourist settlements with urban and territorial cohesion, and enabling new proposals where what is decisive is not only acting on the parties but, globally, on the conditions that defines the scenes of action. In order to deal with the complexity of the tourist development on the Valencian Mediterranean coast, we proposed, as a first step, the identification of settlement types where, contrary to the buildings type, it will be necessary to apply mechanisms that take into account there are structures in the process of evolution. As Giorgio Grassi (1973) already said, a classification is not a type but allows an approximation to it. This has allowed the development of a “Typological Map of Tourist Settlements in the Comunidad Valenciana” where situate case studies while reading the territory as a whole and each settlement in relation to others settlements. A map to add data, based on the definition of parameters related to structure, urban form and architecture, but also to the relationship with the coastal physical environment, and selected for their capacity to provide data for the research purposes., Research project coordinated by Universitat Politècnica de València, department of Proyectos Arquitectónicos, and Universidad Ramon Llull, Barcelona, Enginyeria i Arquitectura La Salle, financed with funds from Plan Nacional I+D+i 2008-2011 (reference BIA2011-28297-C02-01) of the Ministry of Economy and Competitiveness.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Axially loaded grouted connections in offshore conditions using ordinary portland cement

  • Schaumann, Peter
  • Henneberg, Joshua
  • Raba, Alexander
[EN] A grouted connection (GC) is a hybrid connection which joins two telescoped steel tubes by filling the annulus between the steel tubes with grout. GCs are frequently used to enable a force fitted connection between piles and substructure of offshore wind turbines. At latticed substructures this connection is located at mudline level in wet ambient conditions (AC). Nowadays special grout materials are used to achieve not only best mechanical properties but also a good performance during grouting in offshore conditions.To reduce production costs the use of ordinary portland cement (OPC) is investigated as an alternative filling material within this paper. OPC has a much lower tendency to segregate, as there are no aggregates added. This leads to more simplified, stable and cheaper production processes offshore. Further focus is put on the failure mode of OPC filled GCs in submerged condtions.For an appropriate use of OPC offshore a feasible mechanical performance needs to be ensured. Investigating this, small and large-scale laboratory tests were performed at Leibniz Universität Hannover. Using the experimental test setup of previous investigations for special high performance grouts (HPG) [1, 2], enables a direct comparison of HPG and OPC. Documenting liquid and solid OPC properties, like slump flow and compressive strength confirms a stable material quality. Small-scale ULS-tests showed significantly lower ULS-capacities and a more brittle failing process compared to HPG. Lagre-scale tests confirmed the observed failure mechanisms of Schaumann and Raba for OPC filled GCs in submerged conditions [3]. Carried out tests showed significant influence of grout material and confirmed influence of grout annulus size on fatigue capacity., The presented results were achieved within the research project ‘GROWup - Grouted Joints for Offshore Wind Energy Converters under reversed axial loadings and upscaled thicknesses’ funded by the German Federal Ministry for Economic Affairs and Energy (BMWi, funding sign: 0325290). The research partners were Institute for Steel Construction and Institute of Buildung Material Science, both at Leibniz Universität Hannover, Germany. The authors thank the BMWi for funding and all accompanying industry project partners (DNV GL, Senvion SE, Siemens Wind Power, Wilke & Schiele Consulting GmbH) for their support. Additionally the authors thank the material manufacturers for their support. Concluding thanks goes to Prof. Lohaus and his team from the Institute of Building Material Science for an excellent project collaboration.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Validation of GNSS-based reference point monitoring of the VGOS VLBI telescope at Metsähovi

  • Kallio, Ulla
  • Eskelinen, Joona
  • Jokela, Jorma
  • Koivula, Hannu
  • Marila, Simo
  • Näränen, Jyri
  • Poutanen, Markku
  • Raja-Halli, Arttu
  • Rouhiainen, Paavo
  • Suurmäki, Heli
[EN] VLBI telescope reference point, the closest point in the telescope primary axis from the secondary axis, is typically determined indirectly by observation of points co-rotating with the telescope. We have previously measured telescope reference point indirectly with two GPS-antennas attached on the edge of the dish of the Aalto University Metsähovi radio telescope in 2008-2015. Now we have applied the same technique to the new VGOS-telescope of the FGI Metsähovi geodetic research station. The reference point of the VGOS antenna was estimated using post-processed trajectory coordinates of two GNSS antennas. The antennas are attached on the edge of the radio telescope dish with gimbals where a counterweight with shock absorber act as compensators to ensure zenith pointing at all telescope elevation angles. In addition, spherical prisms are attached to the structure of the telescope for tachymetric reference point determination. One purpose of this study is to evaluate the limit values and uncertainties of the compensator assembly by simulations and precise tachymeter measurements. To ensure that the compensation error is nearly constant or can be modelled, we have measured the residual tilt of the GNSS antennas with different VLBI antenna elevations. The results indicate a need to apply the corrections or to improve the compensator design. We aim to improve the counterweight and dampening so that no extra model corrections to trajectory coordinates are needed. For final assurance of our GNSS-based reference point monitoring performance, we have compared the reference point coordinates determined by simultaneous tachymetric and GNSS data. Our results and simulations showed that, with a small compensation error, the influence on reference point coordinates is marginal but the axis offset will be compromised, provided that the compensating angle bias is nearly constant.  Preliminary reference point estimates show a rather good agreement of simultaneous GNSS-based and tachymetric reference points. The final results will be achieved as part of the 18SIB01 EMPIR GeoMetre project, funded from the EMPIR programme and co-financed by the Participating States and from the European Union’s Horizon 2020 research and innovation programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Design, establishment, analysis and quality control of a high-precision reference frame in Cortes de Pallás (Spain)

  • García-Asenjo Villamayor, Luis|||0000-0001-6535-2216
  • Baselga Moreno, Sergio|||0000-0002-0492-4003
  • Martínez, Laura
  • Garrigues, Pascual
  • Luján, Raquel
[EN] A high-precision geodetic reference frame was required in Cortes de Pallás (Spain) to undertake a long-term deformation monitoring project.  Involving distances up to 2000 m, the aimed accuracy was 1 mm and 3 mm for horizontal and vertical components, respectively. Such a high precision is necessary to detect possible displacements of selected points on a critical rocky area in a short period of time, i.e. two or three years, and also to provide ground control for the integration of precise 3D models periodically obtained by remote sensing techniques. Considering the historical geotechnical problems of the area, the possible influence of the hydroelectric power plant, and the peculiar orography of the zone, a proper analysis of the stability is crucial if the reference frame is to be used for rigorous over-time deformation monitoring. This paper describes the deformation monitoring of a 10-pillar geodetic network which was measured from 2018 to 2020 by using a sub-millimetric Mekometer ME5000 (0.2 mm + 0.2 ppm) along with a demanding observing methodology which includes a network of data loggers for temperature, humidity and air pressure as well as proper calibration of sensors and instruments to prevent potential inconsistencies between the scale of the network and the unit of length of the International System (SI-metre). The results demonstrated that the chosen methodology yielded the aimed accuracy. However, using such a high precision methodology entails the problem that small displacements of only one or two millimeters are significantly detected as deformations by conventional deformation analysis and then it arises the problem of finding a subset of stable points for a rigorous datum realization when all the points seem to displace. This general problem is analyzed in the particular case of Cortes de Pallás, where a balanced mix of deformation analysis and technical decisions was eventually adopted to define a precise and stable reference frame for rigorous over-time deformation monitoring., This work has been carried out under the contract T-726 – Control de deformaciones en la ladera norte de la muela de Cortes de Pallás commissioned by the Diputació de València. The authors are grateful to the UCM which granted the use of its ME5000 Mekometer through a co-operation agreement, to José María Grima for his support to calibrate the ME5000 Mekometer, thermometers, and barometers at the Calibration Laboratory of the UPV. We also acknowledge IGS for their efforts to disseminate products available to the global community, and EURAMET for their contribution to the research efforts on the field of large-scale length metrology for geodesy. The UPV team acknowledge the Programa de Ayudas de Investigación y Desarrollo (PAID-01-20) de la Universitat Politècnica de València for funding the research contract of Raquel Luján
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Quality of service and quality of control based protocol to distribute agents

  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Simó Ten, José Enrique|||0000-0003-4677-7627
This paper describes an agent s movement protocol. Additionally, a distributed architecture to implement such protocol is presented. The architecture allows the agents to move in accordance with their requirements. The protocol is based on division and fusion of the agents in their basic components called Logical Sensors. The movement of the agents is based on the quality of services (QoS) and quality of control (QoC) parameters that the system can provides. The protocol is used to know the impact that the movement of the agents may have on the system and obtain the equilibrium points where the impact is minimal., The architecture described in this article is a part of the coordinated project SIDIRELI: Distributed Systems with Limited Resources. Control Kernel and Coordination. Education and Science Department, Spanish Government. CICYT: MICINN: DPI2008-06737-C02-01/02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Two multi-wavelength interferometers for large-scale surveying

  • Sauthoff, Anni
  • Köchert, Paul
  • Prellinger, Günther
  • Meyer, Tobias
  • Pilarski, Frank
  • Weinrich, Stephanie
  • Schmaljohann, Frank
  • Guillory, Joffray
  • Truong, Daniel
  • Silbermann, Jakob
  • Kallio, Ulla
  • Jokela, Jorma
  • Pollinger, Florian
[EN] Deformation monitoring requires the detection of smallest changes, always at the limits of technical feasibility. Trying to push these limits further, we have realised two terrestrial ranging instruments: a long-range 1D electro-optic distance meter and a 3D multilateration-capable sensor system of 50 m range. The former one is intended as primary standard for the calibration of geodetic instrumentation with low uncertainty to the SI definition of the metre. The latter one is intended for monitoring larger monuments like VLBI antennas. In this contribution, we describe the technical challenges and our solutions for such instrumentation. We use the two-colour method for inline refractive index compensation. As common optical source, we developed a versatile multi-wavelength generator based on two Nd:YAG lasers stabilised by a phase-locked loop realised by Field Programmable Gate Arrays (FPGA). The 1D interferometer uses custom-designed achromatic optics and a mechanical frame optimised for form stability under field conditions. The phase demodulation system allows for maximum range flexibility from several meters up to several kilometres. The base ranging unit of the 3D multilateration system adheres to a different demodulation technique, which allows a relatively simple interferometer head design. This approach requires a sophisticated source modulation scheme limiting the applicability to distances over 15 m up to approximately 50 m in our case., This project 18SIB01 GeoMetre has received funding from the EMPIR programme co-financed by the Participating States and from the European Union’s Horizon 2020 research and innovation programme. We would like to thank P. Knigge, D. Fiala, M. Wedde, and M. Peglow for technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Assessing the effectiveness of DTN techniques under realistic urban environments

  • Tornell, Sergio M.
  • Tavares De Araujo Cesariny Calafate, Carlos Miguel|||0000-0001-5729-3041
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] Intelligent Transportation Systems (ITS) require collecting and distributing as much relevant information as possible to provide their services. Such information could also offer new possibilities to various service providers in the wider Smart City context. The distribution of this intelligence is carried out through various vehicular networking strategies, the most flexible of all being Delay Tolerant Networking (DTN). DTN protocols can cope with the problems derived from high mobility and the possibility of high node sparsity. Nevertheless, achieving a fair comparison of DTN solutions in an urban environment is a hard task. In this paper we present a generic DTN model that we use to compare various representative DTN solutions in a metropolitan scenario. We highlight the weak and strong points of each evaluated proposal by also taking into consideration different sending strategies adopted to improve the performance of DTN protocols., This work was partially supported by the Ministerio de Econom´ıa y Competitividad, Spain, under Grants TIN2011-27543-C03-01 and BES-2012-052673 and by the Universitat Politecnica de Val ` encia through the ABATIS project (PAID- `05-12).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Feedback-based Learning Through Online Feedback Systems in Higher Education

  • Figas, Paula
  • Bartel, Alexander
  • Hagel, Georg
[EN] From scientific research it is known that feedback from students to lecturers can positively influence teaching and learning in higher education. This involves both responses concerning the quality of teaching and to the own learning process. In lessons with a large number of students it appears to be challenging to realize such kind of interaction in oral way with all students in class. One possible way is to use online feedback-systems. Through this, all students have the opportunity to express their opinion, requests or problems concerning the lecture in anonymous way any time. Furthermore, it allows discussing the results together in class. The paper deals with the issue of student feedback in higher education and presents an online feedback-system and its integration into the teaching process. In addition, the paper shows some empirical based experiences made with the feedback-system in three courses in a German University of Applied Sciences. It becomes visible that feedback-systems have the potential to improve the quality of teaching and make learning more interactive and student-oriented., This work is part of the EVELIN project which is supported by the Bundesministerium für Bildung und Forschung with the project number 01PL12022C.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

receteame.com: a Persuasive Social Recommendation System

  • Palanca Cámara, Javier|||0000-0002-6209-9603
  • Heras, Stella|||0000-0001-6212-9377
  • Botti V.|||0000-0002-6507-2756
  • Julian, Vicente|||0000-0002-2743-6037
Over the last few years, the emergence of social networks has changed the main activities performed by users on the Internet, going from a mere search and navigation over stored information to a direct interaction with other users. Users have evolved from being consumers of information to real producers (what is known as the transition from Web 1.0 to Web 2.0). Due to the increasing number of heterogeneous users and information that is generated, their unpredictable behavior and the high dynamism of the network structure, users have to cope with a high degree of uncertainty when choosing who to interact to or what information to consume [1]. In order to deal with this uncertainty, users require tools that help them to make decisions regarding their activities within the network. Recommendation systems [2] [3], which are systems that provide effective recommendations about what action users can take or what information they can consume, can be effective tools for performing theses decision-support tasks. In this paper, we present a persuasive social recommendation system for recipe recommendation in a social network (called receteame.com). The proposed system allows the recommendation of recipes taking into account aspects like persuasion, similarity, friendship, trust, reputation and user food tastes., This work was partially supported by MICINN TIN2011-27652-003-01 and MINECO/FEDER TIN2012-36586-CO3-01 projects of the Spanish government.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Comparison of Urban Form based on different city walls between Quanzhou and Newcastle upon Tyne

  • Wang, Di
  • Zheng, Jianyi
[EN] Quanzhou in south-eastern China was built in the Sui Dynasty, having more than 1,000 years of history. Its urban development led to the triple walls in a different period of time. Its unique landscape of multiple walls is a one of the Chinese ancient city patterns. However, the massive stone-built city wall pattern like Newcastle also has more than 1000, years of history in western cities .City walls maintain the preeminence as the city’s most powerful fixation line. The expansion of the wall in Quanzhou shows how the time-space changes, while Newcastle' s fringe belt is relatively stable, which forms a different urban form. This article mainly compares the following aspects: (1) The development of Quanzhou fringe belt; (2) Differences of fringe belts between the multiple walls city and the sole wall city; (3) Differences of land use in intramural zone between two cities. This paper analyzes the differences of fringe belts caused by city walls between Quanzhou, (China) and Newcastle, (England), and their influence on the urban form between the East and the West., This paper is co-funded by the Youth Program of the National Natural Science Foundation (51308232), the National Natural Science Foundation Projects (51578250), the National Science and Technology Support Program of the 12th Five-Year Plan (2015BAL01B01), the Social Development Guidance Project of Fujian Province (2015Y037), the Natural Science Foundation of Fujian Province (2016J01238), Science and Technology Innovation Fund for Young Teachers of Huaqiao University (ZQNPY213).Subsidized Project for Cultivating Postgraduates Innovatives Ability in Scientific Research of Huaqiao University
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Personal development in the virtuality, online activities for individual and group growth

  • Sáiz-Sánchez, Héctor
  • Martínez-De-La-Torre, Javier
  • Esteller-Curto, Roger
  • Serradell-López, Enric
  • Gallego-Navarro, Teresa
  • Rubert-Albiol, Andrea
[EN] Online teaching is commonly offered for courses and it is aimed students acquire specific skills based on the subject requirements. Regarding soft-skills, collaborative and creative activities are usually deployed face-to-face in contrast to online environments, where communication, group dynamics and activities that require interactivity among the participants can be managed easier. Because of this we loose skills acquisition opportunities and other potential benefits of real collaboration mediated by on-line environments. We propose an ICT-based method appropriated for project-based learning, innovative teams and personal development. It has 7 phases and has been designed under the theories of field theories of humanism with the main aim to make possible that everybody in the on-line platform can grow and develop individually together with the group. Professor can apply this as a whole (the 7 phases) or some of them as we have related the phases with on-line tasks. We tested this method with a group of 17 post-graduate students. We concluded that when members have enough maturity and experience, these ICT-based-methods make shared learning possible, with great impact on the course skills and competences, but also on soft skills, which are acquired informally while learning the main course subject., This paper has been developed from the experience in the KA2 Erasmus+ Strategic Partnership project “education on the way: Introducing technology-enhanced informal learning” with reference 2015-1-ES01-KA204-016354 www.ed-way.eu
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

LIF/Mie Droplet Sizing of Water Sprays from SCR System Injector using Structured Illumination

  • Kapusta, Łukasz
[EN] Recent trends in SCR (Selective Catalytic Reduction) systems development increase requirements for UWS (Urea Water Solution) injection. Close-coupled SCR system designs decrease the distance available for water evaporation and urea decomposition. Due to that, much effort is put into static mixing elements design improvement and injection process enhancement. So far, most experimental studies on UWS spray formation were based on Mie scattering visualization using global illumination and shadowgraphy imaging. High speed imaging of Mie signal with global illumination allows to determine global spray parameters such as penetration and angle but does not give information on droplet sizes. Droplet size determination, due to relatively large droplets generated by SCR injectors, can be done with Mie scattering or backlight imaging methods. Then the visualized area becomes narrowed since high magnification is required. Determination of droplet size distribution across whole spray in such arrangement requires number of measurements. LIF/Mie (Laser Induced Fluorescence/Mie scattering) technique provides an attractive alternative for rapid determination of droplet size distribution across the whole spray. This method however suffers from multiple scattering effects which might affect droplet size distribution results even in relatively dilute sprays. In this study, LIF/Mie ratio distribution across sprays from commercial automotive injector for SCR systems was determined by simultaneous LIF and Mie detection using structured illumination. Moreover, the results were compared with conventional LIF/Mie imaging. Nd:YAG pulse laser was used as a light source. Second harmonic beam of 532 nm was used to illuminate the sprays. Instead of UWS pure water doped with Eosin Y was used. The results showed that conventional images exhibited much stronger background signal. Moreover, the conventional imaging was sensitive to reflections from experimental setup elements, specifically reflections from LIF camera filter. These two observations prove the importance of using SLIPI for LIF/Mie droplets sizing in sprays for SCR systems. At the same time the obtained results showed that under certain conditions (no accidental reflections in the background) conventional imaging provides similar LIF/Mie ratio as structured illumination. The results showed that the LIF/Mie ratio remains unchanged over the spray cloud. This suggests that SMD remains unchanged as well. The slight increase of LIF/Mie ratio far from the injector outlet could be caused by absence of small droplets due to lower momentum and thus lower penetration distance. This assumption however should be verified with PIV measurement., Current work was supported by the European Smart Growth Operational Programme 2014-2020 through the project “Development of mixing and urea-water solution conversion unit in SCR systems in order to start production of exhaust system for compression ignition engine that meets the Euro 7 emission standards”, grant number: POIR.04.01.04-00-0060/15-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Bernoulli HMMs at subword level for handwritten word recognition

  • Giménez Pastor, Adrián
  • Juan, Alfons
This paper presents a handwritten word recogniser based on HMMs at subword level (characters) in which state-emission probabilities are governed by multivariate Bernoulli probability functions. This recogniser works directly with raw binary pixels of the image, instead of conventional, real-valued local features. A detailed experimentation has been carried out by varying the number of states, and comparing the results with those from a conventional system based on continuous (Gaussian) densities. From this experimentation, it becomes clear that the proposed recogniser is much better than the conventional system, Work supported by the EC (FEDER) and the Spanish MEC under the MIPRCV “Consolider Ingenio 2010” research programme (CSD2007-00018), the iTransDoc research project (TIN2006-15694-CO2-01), and the FPU grant AP2005-1840.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Author Profiling and Plagiarism Detection

  • Rosso, Paolo|||0000-0002-8922-1242
In this chapter we introduce the topics that we will cover in the RuSSIR 2014 course on Author Profiling and Plagiarism Detection (APPD). Author profiling distinguishes between classes of authors studying how language is shared by classes of people. This task helps in identifying profiling aspects such as gender, age, native language, or even personality type. In case of the plagiarism detection task we are not interested in studying how language is shared. On the contrary, given a document we are interested in investigating if the writing style changes in order to unveil text inconsistencies, i.e., unexpected irregularities through the document such as changes in vocabulary, style and text complexity. In fact, when it is not possible to retrieve the source document(s) where plagiarism has been committed from, the intrinsic analysis of the suspicious document is the only way to find evidence of plagiarism. The difficulty in retrieving the source of plagiarism could be due to the fact that the documents are not available on the web or the plagiarised text fragments were obfuscated via paraphrasing or translation (in case the source document was in another language). In this overview, we also discuss the results of the shared tasks on author profiling (gender and age identification) and plagiarism detection that we help to organise at the PAN Lab on Uncovering Plagiarism, Authorship, and Social Software Misuse., The PAN shared tasks on author profil-ing and on plagiarism detection have been organised in the framework of the WIQ-EIIRSES project (Grant No. 269180) within the EC FP 7 Marie Curie People. The research work described in the paper was carried out in the framework of the DIANA-APPLICATIONS-Finding Hidden Knowledge in Texts: Applications (TIN2012-38603-C02-01) project, and the VLC/CAMPUS Microcluster on Multimodal Interaction inIntelligent Systems.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Page Segmentation of Structured Documents Using 2D Stochastic Context-Free Grammars

  • Álvaro Muñoz, Francisco
  • Cruz Fernández, Francisco
  • Ramos Terrades, Oriol
  • Benedí Ruiz, José Miguel
  • Sánchez Peiró, Joan Andreu|||0000-0003-0423-2020
n this paper we define a bidimensional extension of Stochastic Context-Free Grammars for page segmentation of structured documents. Two sets of text classification features are used to perform an initial classification of each zone of the page. Then, the page segmentation is obtained as the most likely hypothesis according to a grammar. This approach is compared to Conditional Random Fields and results show significant improvements in several cases. Furthermore, grammars provide a detailed segmentation that allowed a semantic evaluation which also validates this model., Work partially supported by the Spanish MEC under the STraDA research project (TIN2012-37475-C02-01), the MITTRAL (TIN2009- 14633-C03-01) project, the Spanish projects TIN2009-14633-C03-01/03 and 2010- CONES-00029, the FPU grant (AP2009-4363), by the Generalitat Valenciana under the grant Prometeo/2009/014, and through the EU 7th Framework Programme grant tranScriptorium (Ref: 600707)