Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 24
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

NMR techniques for a structural characterization of fluorescent Carbon Dots

  • Vallan, Lorenzo
  • Benito, Ana M.
  • Urriolabeitia, Esteban P.
  • Maser, Wolfgang K.
Resumen del trabajo presentado a la 7ª Jornada de Jóvenes Investigadores (Química y Física) de Aragón, celebrada en la Universidad de Zaragoza el 24 de noviembre de 2016., Carbon Dots (CDs), since their discovery in 2004, are receiving considerable attention in the fields of optoelectronic devices, sensors and biological labelling. CDs are small carbon nanoparticles below the size of 10 nm that show a very strong photoluminescence emission. Compared to the semiconductor nanocrystals, which have raised serious health and environmental concerns, CDs present a safe, green and cheaper alternative, especially regarding the biomedical application. In fact CDs show good biocompatibility and an adequate functionalization of the surface enables the cellular uptake, opening the door to their use in optical imaging techniques and, with a further step, as drug carriers for therapeutic applications. In order to achieve these results, the comprehension of the CDs¿ chemical structure can be of great advantage, providing a starting point to understand which changes in the structure will affect the fluorescence behaviour and how. CDs can be synthetized starting from several oxygen-rich carbon sources, such us polysaccharides (top-down approach) or organic molecules (bottom-up approach). Among many different synthetic methods, pyrolysis, hydrothermal treatment and microwave irradiation offer an easy and suitable procedure to obtain CDs. In the current work nitrogen-doped CDs have been synthetized exploiting old and new synthetic approaches based on the condensation reactions of organic reagents. The as-prepared fluorescent CDs were characterized employing several powerful techniques for the structure determination, such as H1NMR, C13NMR, IR, XPS and Elemental Analysis., Financial support from EU under project MCSA-ITN-2014-ETN 642742 'Enabling Excellence' and DGA/FSE (T66-GCNN) is acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Tuning aggregation and charge transfer of poly(3-hexylthiopene) nanoparticles by graphene oxide

  • Istif, Emin
  • Hernández-Ferrer, Javier
  • Urriolabeitia, Esteban P.
  • Stergiou, Anastasios
  • Tagmatarchis, Nikos
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen del trabajo presentado a la International Conference on Carbon Nanoscience and Nanotechnology (NanoteC), celebrada en Nantes (Francia) del 30 de agosto al 2 de septiembre de 2017., Nanoparticles derived from conjugated polymers have attracted widespread attention for a number of reasons such as their easy synthesis, tuneable properties, less toxicity and environmentally friendly processing conditions for device fabrication. Besides, their properties can be enhanced by preparing composites with carbon nanomaterials. Poly-3-hexyl thiophene (P3HT), the archetype of conducting polymers, is characterized by the presence of quasi-crystalline domains (i.e. H, J or H-J aggregates) defining the electro-optical properties. However, reliable control of these nanoscale aggregates plays an essential role to tune charge transport and charge separation properties. In this work, we report the self-assembly of novel conjugated polymer nanoparticle/graphene oxide (P3HTNPs/GO) composites using a re-precipitation technique. The resulting composites are stable in aqueous dispersions and can be processed directly instead of usual hazardous chlorinated solvents. Photophysical studies reveals that the internal aggregate structure of the P3HTNPs is affected by GO and can be tuned by varying the amount of GO. Meanwhile, Raman spectroscopy and cyclic voltammetry reveal that the observed changes in the P3HTNP aggregate structure of the P3HTNPs/GO composite are accompanied by a charge transfer process taking place at the interface between P3HTNPs and the GO sheets. Our synthesis approach leading to novel P3HTNPs/GO composites with tuneable electro-optical properties and environmental-friendly processing characteristics thus may provide a base for the development of further functional nanomaterials for variety of applications for photovoltaic or sensing applications., EU H2020 MSC ITN 642742. MINECO (ENE2016-79282-C5-1-R). DGA-T66-GCNN., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Preparation and characterization of poly(3-hexyl thiophene) nanoparticles and graphene oxide composites in water

  • Istif, Emin
  • Hernández-Ferrer, Javier
  • Urriolabeitia, Esteban P.
  • Tagmatarchis, Nikos
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen del póster presentado a la 9th Stuttgart Nanodays Conference, celebrada en Munich (Alemania) del 13 al 15 de septiembre de 2017., Funding by EU (Project H2020-ITN 2014 642742), Spanish MINECO (ENE2013-48816-C5-5-R) and Government of Aragon (DGA-ESF-T66), is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Structural elucidation and comparison of fluorescent carbon dots

  • Vallan, Lorenzo
  • Benito, Ana M.
  • Martínez Fernández de Landa, María Teresa
  • Urriolabeitia, Esteban P.
  • Maser, Wolfgang K.
Resumen del póster presentado a la 9th Stuttgart Nanodays Conference, celebrada en Munich (Alemania) del 13 al 15 de septiembre de 2017., Funding by EU (Project H2020-ITN 2014 642742), Spanish MINECO (ENE2013-48816-C5-5-R) and Government of Aragon (DGA-ESF-T66), is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Novel materials for optoelectronic devices: Conjugated polymer nanoparticle-graphene oxide charge-transfer complexes

  • Maser, Wolfgang K.
  • Istif, Emin
  • Hernández-Ferrer, Javier
  • Urriolabeitia, Esteban P.
  • Stergiou, Anastasios
  • Tagmatarchis, Nikos
  • Fratta, Giuseppe
  • Colchero, J.
  • Palacios-Lidón, E.
  • Kalbáč, Martin
  • Large, Matthew J.
  • Dalton, Alan B.
  • Benito, Ana M.
Resumen del trabajo presentado al Nano Application Workshop, celebrado en Munich (Alemania) del 19 al 21 de septiembre de 2018., Conjugated polymers (CPs) constitute the base of organic thin film optoelectronic devices, such as organic photovoltaic solar cells (OSCs) and organic light emitting devices (OLEDs). Deposited onto large areas of any shape they critically contribute to the development of self-powered, smart and ubiquitous communication platforms. Operational performance and fabrication from 'green' solutions compatible with large-area coating or printing technologies are key requirements for their commercial implementation. Applying self-assembly strategies, CPs can be prepared in the form of water dispersible nanoparticles being of actual interest for achieving improved device performance. In this work we present novel pathways for the design of improved organic thin film optoelectronic devices by marrying nanoparticles of CPs (CPNPs) with 2D sheets of graphene oxide (GO). Using poly(3-hexylthiophene) (P3HT) as benchmark CP, we demonstrate the game-changing role of GO in tuning the excitonic aggregate behavior of P3HTNPs and the efficient formation P3HTNPs-GO charge-transfer complexes. Thin films thereof reveal improved separation of photo-generated charge carriers. Integration into a photoelectrochemical device shows significantly improved photoactivity. Moreover, the thin films reveal unique molecular switching behavior. The possibility to overcome external performance limitations and to employ 'green' processing technologies offers exciting possibilities for further progress in the field of organic thin film optoelectronic devices., EU Horizon 2020 Marie Sklodowska-Curie grant 642742 ("Enabling Excellence"), Spanish Ministry MINEICO (ENE2016-79282-C5-1-R), Government of Aragón (Recognized Group DGA-T03-17R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Carbon dots on TiO2 for perovskite photovoltaics, methanol oxidation and water splitting

  • Ansón-Casaos, Alejandro
  • Vallan, Lorenzo
  • Hernández-Ferrer, Javier
  • Xie, Haibing
  • Lira-Cantú, Mónica
  • Benito, Ana M.
  • Maser, Wolfgang K.
Talk delivered in 7th International conference on Advanced Hydrogen Energy, ANM conference series 2019, at University of Aveiro, in Aveiro, Portugal, 17-19 July 2019.- 1 Figura, Carbon dots (CDs) are a class of fluorescent nanoparticles including an extremely rich variety of structures and functional groups. Interestingly, not only the physicochemical properties are affected by the nature of the CD structure, but also their optical behavior. Fluorescence in CDs shows particular characteristics of strong intensity and wavelengths in the visible region. Consequently, an interesting issue arises on how structurally-different CDs modify the electron transport and photoactivity of semiconductor oxides, in particular TiO2., This work has been funded by the MINECO and the European Regional Development Fund (ENE 2016-79282-C5-1-R), the Government of Aragón (T03-17R and E14-17R), and the European Commission (H2020-MSCA-ITN-2014-ETN 642742 “Enabling Excellence”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Graphene oxide and poly(3-hexylthiophene) nanoscale interface interactions probed by KPFM

  • Palacios-Lidón, E.
  • Colchero, J.
  • Istif, Emin
  • Benito, Ana M.
  • Maser, Wolfgang K.
Poster presented at the NanoteC19 conference, International Conference on Carbon Nanosciene and Nanotechnology, 27th-30th August, Zaragoza (Spain)., Graphene oxide (GO) is a chemically modified form of graphene containing many different types of oxygen functional groups on its basal plane and edges. Their presence imparts hydrophilicity and allows for ease of processing from water dispersions. We recently have shown that sheets of graphene oxide critically affect the aggregate structure of water dispersible nanoparticles P3HTNPs and thus the performance of optoelectronic thin film devices. In this work we elucidate the photogenerated charge tranfer dynamics of (P3HTNPs-GO) ensembles with defined aggregate structure across their interface by Kelvin Probe Force microscopy (KPFM)., EU Horizon 2020 research and innovation programme Marie Sklodowska-Curie grant agreement No 642742. Project ENE2016-79282-C5-1-R. Grupo Reconocido DGA T03_17R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Nanostructured complexes of conducting polymers and graphene oxide

  • Istif, Emin
  • Vallan, Lorenzo
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 figure.-- Talk delivered at the 9th Nanodays Workshop on Advanced Materials, Munich (Germany), Sept. 13-15, 2017, Intrinsically conducting polymers form the base for the development of plastic electronic devices and hold great promise in optoelectronic applications such as thin film organic field-effect transitors, OLEDS and solar cells. Control of morphology and aggregation states by nanostructuring is essential for improving the device performance. In the last decade, research has focused on liquid phase assembly processes. These afford conjugated polymers in the form of nanoparticles or nanowires, which are dispersible in aqueous dispersions and allow for the fabrication of thin films with well-defined characteristics from environmentally-friendly solutions. Moreover, the liquid phase self-assembly processes provide unique opportunities for the development of novel composite materials with graphene based materials [1, 2]. Here we present our results of our recent work on the development of novel composite materials based of graphene oxide and poly (3-hexylthiophene) (P3HT) [3]. We show that liquid phase assembly processes in the presence of water-soluble graphene oxide sheets lead to the formation P3HT nanoparticles (P3HTNPs) in intimate contact with surrounding sheets of graphene oxide. During the synthesis, graphene oxide acts as a >good> solvent and induces important changes on the internal aggregation structure and the related interchain coupling. At the same time, the charge-transfer properties as a function of GO concentration are modified. Both effects are intimately coupled and lead to the stabilization of of P3HTNPs-GO donor-acceptor nanostructures offering improved charge transport and charge separation characteristics in thin films., Funding by EU (Project H2020-ITN 2014 642742), Spanish MINECO (ENE2013-48816-C5-5-R) and Government of Aragon (DGA-ESF-T66), is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Separación de nanotubos de carbono en metálicos y semiconductores: Análisis espectroscópico en medio disperso

  • Santidrián, Ana
  • Rubio-Muñoz, Cristina
  • Ansón-Casaos, Alejandro
  • Martínez Fernández de Landa, María Teresa
  • Benito, Ana M.
  • Maser, Wolfgang K.
2 figuras.-- Presentado en el Encuentro anual IberNAM 2015, "Empresas de Base Tecnológica en Micro-Nanosistemas: experiencias y oportunidades de colaboración”, Zaragoza, (España), 10-11 Diciembre 2015., El uso de gel para cromatografía, como Sephacryl, ha demostrado ser un método eficaz para separar nanotubos metálicos y semiconductores cuando la heterogénea muestra de partida de nanotubos de carbono es dispersada en surfactantes como el SDS. En el presente estudio se analizan las fracciones obtenidas por este método de separación por métodos espectroscópicos., Este trabajo ha sido financiado por el MINECO, el CSIC (proyecto intramural 2015801011), el Fondo Europeo de Desarrollo Regional (ENE2013-48816-C5-5-R), el Gobierno de Aragón, el Fondo Social Europeo (DGA-ESF-T66 Grupo Consolidado) y la Comisión Europea (H2020-MSCA-ITN-2014-ETNSEP-210139683 642742).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Carbon nanotubes meet graphene oxide: Efficient removal of chemisorbed water for enhanced electrode materials

  • Maser, Wolfgang K.
  • Benito, Ana M.
  • Núñez, Jesús David
  • Rouzière, Stéphan
  • Launois, Pascale
  • Arenal, Raúl
  • Ajayan, Pulickel M.
Work presented at the 1st Workshop "Carbon Nanotubes Meet 2-Dimensional Materials", 2nd-4th November, 2016, Ruprecht Karls Universitat Heidelberg (Germany), Self-assembled graphene oxide (GO) papers are of increased interest for filtration, sensing and energy storage applications . The performance of the paper assemblies, especially upon thermal reduction treatments, is seriously affected by the presence of chemisorbed water, i.e. water molecules inherently bound to the oxygen functional groups (OFGs) of GO. In this work we show that oxidized multiwall carbon nanotubes (oCNTs) self-assembled onto GO sheets by an in-situ exfoliation process effectively can remove chemisorbed water and significantly reduce associated damaging effects., Funding by Spanish Ministry MINECO and European Regional Development Fund (Project ENE2013-48816-C5-5-R), the Government of Aragon and the European Social Fund (ProjectDGA-ESF-T66), and the EU (Project H2020-ITN 2014 642742) is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Assessment of charge transfer phenomena in nanostructured composite materials using photoelectrochemical methods

  • Hernández-Ferrer, Javier
  • Istif, Emin
  • Ansón-Casaos, Alejandro
  • Santidrián, Ana
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 figure.-- Abstract of talk delivered at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual in Benasque (Aragon, Spain)., Photoelectrochemistry is a valuable technique for the study of intrinsic electronic properties of a great variety of nanostructured semiconductor materials, such as conductive polymers or metal oxide nanoparticles. It is also a highly valuable implement to assess charge and/or energy transfer phenomena between the mentioned semiconductors and carbon nanomaterials (GO, CNTs), unveiling their role as charge acceptors/donors, blockers/transporters, sensitizers/conditioners, or even as photoelectroactive materials for themselves, thus allowing the tuning of optoelectronic properties of composite materials, for their future application in fields related to energy and environment, such as water splitting, solar cells or water remediation. This versatility makes photoelectrochemistry a key tool in the field of carbon nanoscience and nanotechnology., MINEICO (project ENE2016-79282-C5-1-R, AEI/FEDER, UE), European Union (H2020-MSCA-ITN-2014-ETN 642742 ), Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER, UE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

GO-ing on with graphene oxide

  • Maser, Wolfgang K.
  • Benito, Ana M.
HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual, in Benasque (Aragon, Spain)., Graphene oxide (GO) is an elusive but highly fascinating tunable nanostructure. Dispersible in aqueous solutions, it can be easily processed into macroscopic functional materials such as papers, aerogels and thin films for different kinds of applications. Equally, it can be used as versatile platform for the formation of functional hybrid optoelectronic materials. GO-ing on with GO research, we will present our latest findings on the use of GO as unique interface layer. We will demonstrate that GO can be employed in a controllable way to enable or block charge transfer in optoelectronic device structures. Emphasis is given on the unique and highly dynamic charge-transfer interface interactions established with conjugated polymers facilitating improved thin film operation of interest for optoelectronic device structures., Funding by EU (Project H2020-ITN 2014 642742), Spanish MINEICO (Project ENE2016-79282-C5-1-R, AEI/FEDER) and Government of Aragon (DGA-T03-17R, FEDER, UE), is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

In-situ graphene oxide thermal analyses via TEM/EELS: water desorption, reduction and graphitisation

  • Peláez-Fernández, Mario
  • Bermejo-Solís, Alba
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
1 figure.-- Talk delivered at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual in Benasque (Aragon, Spain)., For the last fifteen years, graphene oxide (GO) has become a material of great importance within the subject of chemically modified graphene (CDG) for its vast potential applications. However, both the chemical structure of Graphene oxide and the diverse processes taking place in thermal reduction of GO into reduced graphene oxide (RGO) are still not completely clear despite the sizable amount of studies concerning this issue. TEM and EELS, using a sample holder capable of heating samples up to 1200ºC within the TEM, is a unique and extensive technique for the analysis of the reduction of GO. Using this technique, we can measure, simultaneously and in situ, four main properties essential to this analysis at several intermediate temperatures and under high vacuum: the oxidation rate, its thickness, its mass density and its sp2-sp3 bond ratio. This study presents an analysis of GO by studying all of the aforementioned properties in two different studies: a first one heating up to 300ºC to better understand the physisorbed and chemisorbed water desorption, and a second one up to 1200ºC focused on the desorption of various oxygen functional groups; as well as the graphitisation of GO. Our results will be compared with previous studies on the matter., This work was supported by the Spanish MINECO (MAT2016-79776-P, AEI/FEDER, EU), and European Union H2020 programs Marie Sklodowska-Curie Enabling Excellence (642742), ESTEEM3 (823717), Flag-ERA GATES (JTC - PCI2018-093137) and Graphene Flagship (785219).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

P3HT aggregation tuned by synergic interaction with different carbon nanostructures

  • Colom, E.
  • Istif, Emin
  • González Domínguez, José Miguel
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 figure.-- Talk delivered at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual, in Benasque (Aragon, Spain)., Poly(3-hexylthiophene) (P3HT) is one of the most popular conductive polymers for optoelectronic applications. [1] Their device operation critically depends on the nanocrystalline domain structure, i.e. the aggregate structure acquired by the polymer chains. Most common aggregates' distribution corresponds to H-aggregates, which implies charge transfer across the chains compared to those acquiring a J- aggregate structure with favorable charge transport along the chains. [2] We recently have shown that strong interactions between P3HT and water-dispersible graphene oxide can be obtained upon the formation of P3HT nanoparticles in aqueous dispersions. [3,4] These interactions enable a significant modification of the internal structure of P3HT aggregates towards a structure predominated by J-aggregates. Following this approach, in this work we have synthesized P3HT nanoparticles by the re-precipitation method in the presence of various types of water-soluble carbon nanostructures. Under scrutiny are graphene oxide flakes of different sizes, as well as nanocrystalline cellulose of type I and II. Of all the nanostructures exploited, the rarely investigated nanocyrstalline cellulose of type II, [5] exhibits significantly enhanced synergetic interface interactions with P3HT nanoparticles. This finding not only reveals a great potential towards improved thin film optoelectronic device structures, but even more underlines value of nanocellulose II for the development of green inks of photoactive polymers, ready to be used for printed electronics., Funding by EU (Project H2020-ITN 2014 642742), Spanish MINEICO (Project ENE2016-79282-C5-1-R1 (AEI/FEDER, UE), contract BES2017-080020 including FSE, UE, contract IJCI-2016-27789) and Government of Aragon (DGA-T03-17R and FEDER, UE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Achievements and perspectives on carbon nanotube conducting inks

  • Ansón-Casaos, Alejandro
  • Sanahuja-Parejo, Olga
  • Santidrián, Ana
  • Martínez Fernández de Landa, María Teresa
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen del trabajo presentado al ChemOnTubes, celebrado en Bruselas (Bélgica) del 3 al 7 de abril de 2016., This work has been funded by MINECO and European Regional Development Fund (ENE2013-48816-C5-5-R NANOSOL-MAT), CSIC (project 2015801011 Intramural), Government of Aragón and European Social Fund (DGA-ESF-T66 Grupo Consolidado) and European Commission (H2020-MSCA-ITN-2014-ETN 642742 Enabling Excellence)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Influence of different variables on SWCNT sorting by gel chromatography

  • Santidrián, Ana
  • Ansón-Casaos, Alejandro
  • Martínez Fernández de Landa, María Teresa
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen del póster presentado a la Carbon Nanoscience and Nanotechnology Conference (NanoteC), celebrada en Dublin (Irlanda) del 31 de agosto al 3 de septiembre de 2016., Typically, during the production of single-walled carbon nanotubes (SWCNTs), mixtures of various chirality species are synthesized. The electronic structure of SWCNTs, described by the chiral vector (n,m), determines their unique electrical and optical properties. Dueto these properties, SWCNTs have found potential applications in numerous fields. In many cases, the separation between semiconducting and metallic SWCNTs is needed for electronic applications. In the present work, we study process variables in the separation of SWCNTs by a gel chromatography method. Two types of SWCNTs were used: high-pressure carbon monoxide disproportionation (HiPco) SWCNTs and are discharge SWCNTs. Besides, in order to study the process selectivity dependence on the surface chemistry, the initial SWCNTs were functionalized. The experimental procedure of the chromatography column consisted of 3 steps: firstly, the SWCNTs were dispersed in a surfactant (sodium dodecyl sulfate (SDS) or pluronic F-68) in order to have a stable dispersion and avoid aggregation of SWCNTs. Different concentrations of the SWCNT initial dispersion were investigated (2, 1, 0.5, 0.25, 0.1 mglmq. Next, ultracentrifugation was performed to remove residual catalyst particles, amorphous carbon, and tube bundles. Once the SWCNTs are purified and individualized, Sephacryl gel was used to sort metallic and semiconducting SWCNTs. Different column lengths and retention times were investigated. Elution was done using a surfactant and the different fractions were collected sequentially. The collected fractions were characterized by Raman spectroscopy and absorption spectroscopy. The spectroscopy results show that the former fraction are enriched in SWCNTs in resonance via metallic transitions (E11M) and the latter fractions mainly contained SWCNTs in resonance via E22S. The results show that the technique effectively separates the SWCNTs. In addition, it was found that the selection process depends on the origin of the SWCNTs material and it is highly affected by the surface chemistry. Besides, the concentration of the raw SWCNTs dispersion and the length of the column play an important role towards the separation of single-chirality SWCNTs. The optimum conditions are reached by low SWCNT concentrations and long columns., This work has been funded by MINECO and European Regional Deve1opment Fund (ENE2013-48816-C5-5-R "NANOSOL-MAT"), CSIC (project 2015801011 "lntramural"), Government of Aragón and European Social Fund (DGA-ESF-T66 "Grupo Consolidado") and European Commission (H2020-MSCA-ITN-2014-ETN 642742 "Enabling Excellence")., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Three problems in carbon nanotube and graphene fluid dynamics

  • Ansón-Casaos, Alejandro
  • Sanahuja-Parejo, Olga
  • Rubio-Muñoz, Cristina
  • Santidrián, Ana
  • Martínez Fernández de Landa, María Teresa
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen del trabajo presentado al Nanomath, celebrado en Toulouse (Francia) del 27 al 30 de junio de 2016., This work has been funcled by MINECO ancl Europea.n Regional Development Funcl (ENE2013-48816-C5-5-R "NANOSOL-MAT"), CSIC (project 2015801011 "Int.ramural"), Government of Aragón and European Social Fund (DGA-ESF-T66 "Grupo Consolidado") ancl European Commission (H2020-MSCA-ITN-2014-ETN 642742 "Enabling Excellcnce")., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Liquid phase Raman spectroscopy of carbon nanotubes sorted by gel chromatography

  • Santidrián, Ana
  • Ansón-Casaos, Alejandro
  • Martínez Fernández de Landa, María Teresa
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen del póster presentado al ChemOnTubes, celebrado en Bruselas (Bélgica) del 3 al 7 de abril de 2016., Single-walled carbon nanotubes (SWCNTs) are considered as ene-dimensional (1 D) nanomaterials. The density of states (DOS) of 1 D materials is nota continuous function of energy, but it is confined in the so called van Hove singularities (vHSs). The electronic structure of SWCNTs, described by the chiral vector (n,m), determines their unique electrical and optical properties. Due to these properties, SWCNTs have found potential applications in numerous fields. In many cases, it would be desirable to have well-dispersed individualized SWCNTs. Besides, the separation between semiconducting and metallic SWCNTs is needed in electrical applications. In the present work, we study process variables in the separation of SWCNTs by a gel chromatography method. Firstly, the SWCNTs were dispersed in sodium dodecyl sulfate (SDS) in order to have a stable dispersion of SWCNTs and avoid aggregation of SWCNTs. Next, ultracentrifugation was effected to remove residual catalyst particles, amorphous carbon, and tube bundles. Once the SWCNTs are purified and individualized, Sephacryl gel was used to sort metallic and semiconducting SWCNTs. Elution was done using SDS, and the different fractions were collected in separated vials. In Figure 1, we observe the Raman spectra (Figure 1 a. and 1 b.) and absorption spectra (Figure 1 c.) of the separated fractions: raw SWCNTs (black line ), fraction 1 (red dashed line ), fraction 12 (green broken line), and fraction 17 (blue dotted line). The spectroscopy results show that the bands corresponding to SWCNTs in resonance via metallic transitions (E11 M) are more intense in the first fractions (Fr. 1) and bleached in the others (Fr. 12 and Fr. 17). The spectra of the following fractions (Fr. 12 and Fr. 17) present more intense bands in resonance via E22S. Therefore, the former fractions are enriched in metallic SWCNTs and the latter in semiconducting SWCNTs. The results show that the technique effectively separates the SWCNTs. In addition, it was found that the concentration of the raw SWCNTs dispersion plays an important role towards the separation of single-chirality SWCNTs., This work has been funded by MINECO and European Regional Development Fund (ENE2013-48816-C5-5-R "NANOSOL-MA T"), CSIC (project 2015801011 "lntramural"), Government of Aragón and European Social Fund (DGA-ESF-T66 "Grupo Consolidado") and European Commission (H2020-MSCA-ITN-2014-ETN 642742 "Enabling Excellence")., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Purificación de dispersiones acuosas de nanotubos de carbono de capa única mediante centrifugación

  • Ansón-Casaos, Alejandro
  • Santidrián, Ana
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • Martínez Fernández de Landa, María Teresa
Trabajo presentado a la XIV Reunión del Grupo Español del Carbón, celebrada en Málaga del 22 al 25 de Octubre de 2017., La presentación de este trabajo ha sido posible gracias a la financiación recibida de la Comisión Europea (H2020-MSCA-ITN-20 14-ETN 642742 "Enabling Excel lence"), el MINECO y el FEDR (ENE 2016-79282-CS-1-R) y el Gobierno de Aragón y el FSE (DGA-ESF-T66 "Grupo Consolidado")., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Graphene oxide as versatile charge-transfer interface for improved optoelectronic materials

  • Maser, Wolfgang K.
  • Benito, Ana M.
Talk delivered at the 2019 Nano Applications Workshop, 17th-18th july 2019, München (Germany)., Graphene oxide (GO) is a highly defective chemically modified form of graphene containing many different types of oxygen functional groups on its basal plane and edges. Their presence imparts hydrophilicity and allows for easy processing from water dispersions. These facts constitute the base for their use as platforms for the formation of functional hybrid optoelectronic materials, Here GO serves as highly versatile interface layer which can be employed in a controllable way to allow or block charge transfer in optoelectronic materials. 1,2,3,4, thus contributing to improved thin film device performance. In this presentation, we will focus on the interaction of GO with conjugated polymers emphasizing the dynamic charge-transfer across the interface layer in different configurations., EU Horizon 2020 Marie Sklodowska-Curie grant 642742 ("Enabling Excellence"), Spanish Ministry MINEICO (ENE2016-79282-C5-1-R and ENE2016-79282-C5-4-R), Gobierno de Aragón (Recognized Group DGA-T03-17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

In-situ graphene oxide thermal behaviour via TEM/EELS: water desorption, reduction and graphitisation

  • Peláez-Fernández, Mario
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Arenal, Raúl
1 figure.-- Abstract of the poster presented at the NanoteC19 conference, International Conference on Carbon Nanosciene and Nanotechnology, 27th-30th august 2019, Zaragoza (Spain)., Through the last decade, graphene oxide (GO) has become a material of growing importance within the realm of Chemically modified graphene (CDG) [1] for its many potential applications[2]. However, both the chemical structure of Graphene oxide and the diverse processes taking place in thermal reduction into reduced graphene oxide (RGO) are still not completely clear despite the amount of studies concerning this issue [2]. Electron energy loss spectroscopy, coupled with a sample holder capable of heating samples up to 1200°C, is a unique and extensive technique for the analysis of the reduction of GO. Using this technique, we can measure simultaneously four main properties essential to this analysis at any given temperature and under ultra high vacuum: the oxidation rate [3], its thickness [4], its mass density [5] and its sp2-sp3 bond ratio [6]. This study presents an analysis of GO and all the aforementioned properties in two different studies: one up to 300°C to better understand the physisorbed and chemisorbed water desorption, and a second one up to 1200°C focused on the reduction of GO by desorption of various oxygen functional groups; as well as the graphitisation of GO. Our results will be compared with previous studies on the matter., This work was supported by the EU MSCA project 642742, Research supported by the Spanish MINECO (MAT2016-79776-P, AEI/FEDER, EU), Government of Aragon through project DGA E13_17R (FEDER, EU) and European Union H2020 programs "ESTEEM3" (823717) and Graphene Flagship (785219), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Photoelectrochemistry: a tool for the study of charge transfer at interfaces with carbon nanostructured materials

  • Hernández-Ferrer, Javier
  • Istif, Emin
  • Ansón-Casaos, Alejandro
  • Santidrián, Ana
  • Víctor-Román, Sandra
  • Benito, Ana M.
  • Maser, Wolfgang K.
Work presented at the NanoteC19 conference, International Conference on Carbon Nanosciene and Nanotechnology, 27th-30th august 2019, Zaragoza (Spain)., Photoelectrochemistry of nanomaterials is commonly employed in fields related to energy and environmental applications, such as water splitting, solar cells or water remediation. It is a valuable technique for the direct evaluation of the performance for the desired application. In addition, it can be used for the study of intrinsic electronic properties of nanostructured of a great variety of semiconductor materials, such as conductive polymers or metal oxide nanoparticles. It is also a highly valuable implement to assess charge and/or energy transfer phenomena between the mentioned semiconductors and carbon nanomaterials (GO, CNTs), unveiling their role as charge acceptors/donors, blockers/transporters, sensitizers/conditioners, or even as electroactive materials for themselves, thus allowing the tuning of optoelectronic properties of composite materials. This versatility makes photoelectrochemistry a key tool in the field of carbon nanoscience and nanotechnology [1-4]., MINECO (project ENE2016-79282-C5-1-R), European Union (H2020-MSCA-ITN-2014-ETN 642742), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Charge transfer in nanostructured composite materials: a photoelectrochemical approach

  • Hernández-Ferrer, Javier
  • Istif, Emin
  • Ansón-Casaos, Alejandro
  • Santidrián, Ana
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 Figure.-- Abstract of the work presented at "Current Trends in Electrochemistry", 41st Meeting of the Electrochemisty Group of the Spanish Royal Society of Chemistry, 1st French‐Spanish Atelier/Workshop on Electrochemistry, 6 - 9 July 2021, Paris (France)., Photoelectrochemical techniques are accurate for the study of intrinsic electronic properties of a great variety of nanostructured semiconductor materials, such as conductive polymers, carbon nanomaterials (GO, CNTs, CDs) or metal oxide nanoparticles. It is also a highly valuable implement to assess charge and/or energy transfer phenomena between the mentioned semiconductors unveiling their role as charge acceptors/donors, blockers/transporters, sensitizers/conditioners, or even as photoelectroactive materials for themselves, thus allowing the tuning of optoelectronic properties of composite materials, for their future application in fields related to energy and environment, such as water splitting, electronics, solar cells or water remediation. This versatility makes photoelectrochemistry a key tool in the field of nanoscience and nanotechnology., MINECO and AEI/FEDER/UE (project ENE2016-79282-C5-1-R), European Union (H2020-MSCAITN- 2014-ETN 642742), Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER/UE)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Contribución de congreso (ConferenceOutput)

Titania-coated gold nanorods with expanded photocatalytic response. Enzyme-like glucose oxidation under near-infrared illumination

  • Ortega-Liebana, M.C.
  • Hueso Martos, José Luis
  • Arenal, R.
  • Santamaria, J.
Gold nanorods coated with a uniform titanium dioxide nanoshell have been prepared and used as glucose-oxidase surrogates. Remarkably, this core-shell photocatalytic nanostructure has been able to induce complete oxidation of glucose at near room temperature (32-34 °C) in a wide range of pH values with the aid of a near-infrared (NIR) irradiation source. In contrast, the uncoated gold nanorods exhibit negligible photo-oxidation response under identical experimental conditions thereby proving the photoactivity of the titania shell towards glucose oxidation. The process takes place via in situ photo-generation of singlet oxygen or hydroxyl radicals as reactive oxidative species (ROS). This underlines the role played by the core nanorods as plasmonic light harvesters in the NIR range and constitutes the first example of a NIR-activated enzyme-like catalyst.