Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 32
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Growth Instabilities as a Source of Surface Chemical Structuration in Functional Perovskite Thin Films

  • López Mir, Laura
  • Balcells Argemi, Lluis
  • Valencia, Sergio
  • Kronast, Florian
  • Martínez Perea, Benjamín
  • Miguel, Juan José de
  • Ocal, Carmen
The spontaneous formation of double chemical terminated surfaces of La0.7Sr0.3MnO3 due to deviations from ideal epitaxial growth during its deposition on SrTiO3(001) is presented. The development of surface regions with differentiated topmost composition leads to outstanding surface nanostructuration presenting notably distinct local properties, particularly in terms of electric transport and local work function. Correlation between combined atomic force microscopy and X-ray photoelectron spectroscopy data allows the chemical identification of the two terminations as corresponding to La0.7Sr0.3O and MnO2. The most likely atomistic process at the origin of the surface organization has been interpreted by Monte Carlo simulations that reveal the importance of stacking fault formation as growth proceeds. We present a physical understanding of the experimental results for surfaces in which different electronic responses coexist. The conclusions of the present work can be extended to the growth of other perovskite thin films, therefore broadening the field of functional materials nanostructuration., This work has been supported by the Spanish Government under projects MAT2013-47869-C4 and MAT2015-71664-R. The ICMAB members acknowledge the Spanish MINECO through the project MAT2015-68994-REDC and the Severo Ochoa Program (SEV-2015-0496), FEDER program and the Generalitat de Catalunya through 2014 SGR 501. L.L.M. thanks the Spanish MINECO for a FPI BES-2013-063424 fellowship. J.J.M. thanks the Centro de Computacioń Cientıfí ca (CCC) of the Universidad Autónoma de Madrid for computing time., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Formation of self-organized Mn3O4 nanoinclusions in LaMnO3 films

  • Pomar, Alberto
  • Konstantinović, Z.
  • Bagués, Núria
  • Roqueta, Jaume
  • López Mir, Laura
  • Balcells, Lluis
  • Frontera, Carlos
  • Mestres, Narcís
  • Sandiumenge, Felip
  • Martínez Perea, Benjamín
  • Santiso, José
et al., We present a single-step route to generate ordered nanocomposite thin films of secondary phase inclusions (Mn3O4) in a pristine perovskite matrix (LaMnO3) by taking advantage of the complex phase diagram of manganese oxides. We observed that in samples grown under vacuum growth conditions from a single LaMnO3 stoichiometric target by Pulsed Laser Deposition, the most favorable mechanism to accommodate Mn2+ cations is the spontaneous segregation of self-assembled wedge-like Mn3O4 ferrimagnetic inclusions inside a LaMnO3 matrix that still preserves its orthorhombic structure and its antiferromagnetic bulk-like behavior. A detailed analysis on the formation of the self-assembled nanocomposite films evidences that Mn3O4 inclusions exhibit an epitaxial relationship with the surrounding matrix that it may be explained in terms of a distorted cubic spinel with slight (~9°) c-axis tilting. Furthermore, a Ruddlesden-Popper La2MnO4 phase, helping to the stoichiometry balance, has been identified close to the interface with the substrate. We show that ferrimagnetic Mn3O4 columns influence the magnetic and transport properties of the nanocomposite by increasing its coercive field and by creating local areas with enhanced conductivity in the vicinity of the inclusions., Financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Program for Centres of Excellence in R&D (SEV-2015-0496 and SEV 2013-0295), Projects MAT2011-29081 and MAT2015-71664-R and Ministry of Education and Science of Serbia (Grant—III45018) is acknowledged. This work has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 645658 (DAFNEOX Project). NB thanks the Spanish MINECO for financial support through the FPI program., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Strain-induced perpendicular magnetic anisotropy in La2CoMnO6−ε thin films and its dependence on film thickness

  • Galceran, Regina
  • López Mir, Laura
  • Bozzo, Bernat
  • Cisneros-Fernández, J.
  • Santiso, José
  • Balcells, Lluis
  • Frontera, Carlos
  • Martínez Perea, Benjamín
Ferromagnetic insulating La2CoMnO6-ε (LCMO) epitaxial thin films grown on top of SrTiO3 (001) substrates present a strong magnetic anisotropy favoring the out of plane orientation of the magnetization with a large anisotropy field (∼70 kOe for film thickness of about 15 nm). Diminishing oxygen off-stoichiometry of the film enhances the anisotropy. We attribute this to the concomitant shrinkage of the out of plane cell parameter and to the increasing of the tensile strain of the films. Consistently, LCMO films grown on (LaAlO3)0.3(Sr2AlTaO6)0.7 and LaAlO3 substrates (with a larger out-of-plane lattice parameter and compressive stress) display in-plane magnetic anisotropy. Thus, we link the strong magnetic anisotropy observed in LCMO to the film stress: tensile strain favors perpendicular anisotropy and compressive stress favors in plane anisotropy. We also report on the thickness dependence of the magnetic properties. Perpendicular anisotropy, saturation magnetization and Curie temperature are maintained over a large range of film thickness., We acknowledge financial support from the Ministerio de Economia y Competitividad through the “Severo Ochoa” Programme for Centres of Excellence in Research and Development (Grant No. SEV-2015-0496), and Grants No. MAT2012-33207 and No. MAT2015-71664-R. L.L.-M.’s work has been done as a part of her Ph.D. program in physics at Universitat Autonoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

One-Step Route to Iron Oxide Hollow Nanocuboids by Cluster Condensation: Implementation in Water Remediation Technology

  • Balcells, Lluis
  • Martínez Boubeta, Carlos
  • Cisneros Fernández, José
  • Simeonidis, Konstantinos
  • Bozzo, Bernat
  • Oró, Judith
  • Bagués, Núria
  • Arbiol, Jordi
  • Mestres, Narcís
  • Martínez Perea, Benjamín
The fabrication procedure of hollow iron oxide nanoparticles with a large surface to volume ratio by a single-step gas condensation process at ambient temperature is presented. Fe clusters formed during the sputtering process are progressively transformed into hollow cuboids with oxide shells by the Kirkendall mechanism at the expense of oxygen captured inside the deposition chamber. TEM and Raman spectroscopy techniques point to magnetite as the main component of the nanocuboids; however, the magnetic behavior exhibited by the samples suggests the presence of FeO as well. In addition, these particles showed strong stability after several months of exposure to ambient conditions, making them of potential interest in diverse technological applications. In particular, these hierarchical hollow particles turned out to be very efficient for both As(III) and As(V) absorption (326 and 190 mg/g, respectively), thus making them of strong interest for drinking water remediation., We kindly acknowledge the assistance of Guillaume Sauthier, from ICN2, for helping us with valuable X-ray photoelectron investigations. Financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Program for Centres of Excellence in R&D (SEV- 2015-0496), MAT2015-71664-R, FEDER, and funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 645658 (DAFNEOX Project) is acknowledged. N.B. thanks the Spanish MINECO for financial support through the FPI program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structural study of CaMn1−xMoxO3 (0.08 ≤ x ≤ 0.12) system by neutron powder diffraction

  • Supelano, Gutiérrez Iván
  • Parra Vargas, Carlos Arturo
  • Barón González, Aura J.
  • Sarmiento Santos, Armando
  • Frontera, Carlos
Neutron powder diffraction experiments and magnetic measurements in polycrystalline CaMn1−xMoxO3 (x = 0.08, 0.10, 0.12) point towards a possible charge and orbital order in this system. The analysis of structural and magnetic data show that the samples present structural phase transformation from Pnma to P21/m space group and the system has a C-type antiferromagnetic configuration at low temperature. A detailed analysis of the bond distances signals a small Jahn-Teller distortion of only one (x = 0.08) or of the two Mn ions (x = 0.10, 0.12). We identify the partially occupied eg orbitals and this explains the C-type magnetic structure., We thank ILL and Spanish D1B Collaborative Research Group (D1B-CRG) for the provision of beamtime. We also thank the help provided by Dr. I. Puente-Orench and her support during data collection. CF acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496) and project MAT-2015-71664-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Misfit dislocation guided topographic and conduction patterning in complex oxide epitaxial thin films

  • Sandiumenge, Felip
  • Bagués, Núria
  • Santiso, José
  • Paradinas, Markos
  • Pomar, Alberto
  • Konstantinović, Z.
  • Ocal, Carmen
  • Balcells, Lluis
  • Casanove, Marie-Jo
  • Martínez Perea, Benjamín
Interfacial dissimilarity has emerged in recent years as the cornerstone of emergent interfacial phenomena, while enabling the control of electrical transport and magnetic behavior of complex oxide epitaxial films. As a step further toward the lateral miniaturization of functional nanostructures, this work uncovers the role of misfit dislocations in creating periodic surface strain patterns that can be efficiently used to control the spatial modulation of mass transport phenomena and bandwidth-dependent properties on a ≈20 nm length scale. The spontaneous formation of surface strain-relief patterns in La0.7Sr0.3MnO3/LaAlO3 films results in lateral periodic modulations of the surface chemical potential and tetragonal distortion, controlling the spatial distribution of preferential nucleation sites and the bandwidth of the epilayer, respectively. These results provide insights into the spontaneous formation of strain-driven ordered surface patterns, topographic and functional, during the growth of complex oxide heterostructures on lengths scales far below the limits achievable through top-down approaches., The authors thank Dr. Belén Ballesteros for her assistance with electron microscopy experiments. This research was sponsored by the Spanish MINECO (“Severo Ochoa” Programme for Centres of Excellence in R&D: SEV- 2015-0496, MAT2015-71664-R, FEDER program, MAT2012-33207, and MAT2013-47869-C4-1-P), and the European Union Horizon 2020 research and innovation program under the Marie Sklodowska–Curie grant agreement No. 645658. The authors also acknowledge fi nancial aid from the Generalitat de Catalunya (2014 SGR 501). N.B. and F.S. also acknowledge funding from the European Union Seventh Framework Programme under Grant Agreement 312483-ESTEEM2 (Integrated Infrastructure Initiative I3) for providing access to aberration corrected electron microscope at CEMES (Toulouse). N.B. thanks the Spanish MINECO for fi nancial support through the FPI program. F.S. acknowledges support from the Labex (Excellence Laboratory) NEXT for a visiting scientist fellowship at CEMES (Toulouse, France). Z.K. is grateful for the support from the Ministry of Education, Science, and Technological Development of the Republic of Serbia through Project III45018., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Isothermal anisotropic magnetoresistance in antiferromagnetic metallic IrMn

  • Galceran, Regina
  • Fina, Ignasi
  • Cisneros Fernández, José
  • Bozzo, Bernat
  • Frontera, Carlos
  • López Mir, Laura
  • Balcells, Lluis
  • Martínez Perea, Benjamín
Galceran, Regina et al., Antiferromagnetic spintronics is an emerging field; antiferromagnets can improve the functionalities of ferromagnets with higher response times, and having the information shielded against external magnetic field. Moreover, a large list of aniferromagnetic semiconductors and metals with Néel temperatures above room temperature exists. In the present manuscript, we persevere in the quest for the limits of how large can anisotropic magnetoresistance be in antiferromagnetic materials with very large spin-orbit coupling. We selected IrMn as a prime example of first-class moment (Mn) and spin-orbit (Ir) combination. Isothermal magnetotransport measurements in an antiferromagnetic-metal(IrMn)/ferromagnetic-insulator thin film bilayer have been performed. The metal/insulator structure with magnetic coupling between both layers allows the measurement of the modulation of the transport properties exclusively in the antiferromagnetic layer. Anisotropic magnetoresistance as large as 0.15% has been found, which is much larger than that for a bare IrMn layer. Interestingly, it has been observed that anisotropic magnetoresistance is strongly influenced by the field cooling conditions, signaling the dependence of the found response on the formation of domains at the magnetic ordering temperature., We acknowledge financial support from the Spanish MINECO (MAT-2015-71664-R, MAT2015-73839-JIN) and FEDER program. We also acknowledge support from the ERC Advanced grant no. 268066, from the Ministry of Education of the Czech Republic Grant No. LM2015087, from the Grant Agency of the Czech Republic Grant no. 14–37427. ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496). R.G. thanks the Spanish MINECO for the financial support through the FPI program and funding from Marie-Curie-ITN 607904-SPINOGRAPH. I.F. acknowledges the Beatriu de Pinós postdoctoral scholarship (2011 BP-A_2 00014) from AGAUR-Generalitat de Catalunya. B.-G.P. acknowledges support from NRF of Korea funded by the Ministry of Science, ICT & Future Planning (NRF-2014R1A2A1A11051344 and 2015M3D1A1070465). We finally thank Helmholtz-Zentrum Berlin for the allocation of synchrotron radiation beamtime, and Dr. Daniel M. Többens for his kind assistance during data collection., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tunneling anisotropic magnetoresistance in La2/3Sr1/3MnO3/LaAlO3/Pt tunnel junctions

  • Galceran, Regina
  • Balcells, Lluis
  • Pomar, Alberto
  • Konstantinović, Z.
  • Bagués, Núria
  • Sandiumenge, Felip
  • Martínez Perea, Benjamín
The magnetotransport properties of LaSrMnO(LSMO)/ LaAlO(LAO)/Pt tunneling junctions have been analyzed as a function of temperature and magnetic field. The junctions exhibit magnetoresistance (MR) values of about 37%, at H=90 kOe at low temperature. However, the temperature dependence of MR indicates a clear distinct origin than that of conventional colossal MR. In addition, tunneling anisotropic MR (TAMR) values around 4% are found at low temperature and its angular dependence reflects the expected uniaxial anisotropy. The use of TAMR response could be an alternative of much easier technological implementation than conventional MTJs since only one magnetic electrode is required, thus opening the door to the implementation of more versatile devices. However, further studies are required in order to improve the strong temperature dependence at the present stage., We acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496)”, MAT2015-71664-R, and FEDER program. R.G. thanks the Spanish MINECO for the financial support through the FPI program. ZK thanks Project III45018 from the Ministry of Education, Science, and Technological Development of Republic of Serbia., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Topochemical synthesis of cation ordered double perovskite oxynitrides

  • Ceravola, Roberta
  • Oró, Judith
  • Black, Ashley P.
  • Ritter, C.
  • Puente-Orench, Inés
  • Mata, Ignasi
  • Molins, Elies
  • Frontera, Carlos
  • Fuertes, Amparo
Topochemical nitridation in ammonia at moderate temperatures of cation ordered Sr2FeWO6 produces new antiferromagnetic double perovskite oxynitrides Sr2FeWO6-xNx with 0 < x ≤ 1. Nitrogen introduction induces the oxidation of Fe2+ to Fe3+ and decreases TN from 38 K (x = 0) to 13 K for Sr2FeWO5N which represents the first example of a double perovskite oxynitride with both high cationic order and nitrogen content. This synthetic approach can be extended to other cation combinations expanding the possibility of new materials in the large group of double perovskites., This work was supported by the Spanish Ministerio de Economia y Competitividad (MINECO), Spain (Projects MAT2014-53500-R, MAT2015-71664-R, MAT2015-67593-P and ENE2015-63969) and it has been developed under the Materials Science PhD program of the Universitat Autònoma de Barcelona. Fellowship support to AB from MINECO (FPI, project MAT2011-24757) is gratefully acknowledged. ICMAB acknowledges financial support from MINECO through the Severo Ochoa Program (SEV- 2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The Misfit Dislocation Core Phase in Complex Oxide Heteroepitaxy

  • Bagués, Núria
  • Santiso, José
  • Esser, Bryan D.
  • Williams, Robert E.A.
  • McComb, Dave W.
  • Konstantinović, Z.
  • Balcells, Lluis
  • Sandiumenge, Felip
Misfit dislocations form self‐organized nanoscale linear defects exhibiting their own distinct structural, chemical, and physical properties which, particularly in complex oxides, hold a strong potential for the development of nanodevices. However, the transformation of such defects from passive into potentially active functional elements necessitates a deep understanding of the particular mechanisms governing their formation. Here, different atomic resolution imaging and spectroscopic techniques are combined to determine the complex structure of misfit dislocations in the perovskite type La0.67Sr0.33MnO3/LaAlO3 heteroepitaxial system. It is found that while the position of the film–substrate interface is blurred by cation intermixing, oxygen vacancies selectively accumulate at the tensile region of the dislocation strain field. Such accumulation of vacancies is accompanied by the reduction of manganese cations in the same area, inducing chemical expansion effects, which partly accommodate the dislocation strain. The formation of oxygen vacancies is only partially electrically compensated and results in a positive net charge q ≈ +0.3 ± 0.1 localized in the tensile region of the dislocation, while the compressive region remains neutral. The results highlight a prototypical core model for perovskite‐based heteroepitaxial systems and offer insights for predictive manipulation of misfit dislocation properties., The authors thank Dr. Belén Ballesteros for her assistance in TEM experiments with the FEI Tecnai F20 S/TEM microscope. This research was funded by the Spanish MINECO through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐2015‐0496) and MAT2015‐71664‐R, and the European Union Horizon 2020 research and innovation programme under the Marie Sklodowska‐Curie Grant Agreement No. 645658. ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV‐2013‐0295) and by the CERCA Programme (Generalitat de Catalunya). The authors also acknowledge financial aid from the Generalitat de Catalunya (2014 SGR 501 and 2014 SGR 1216). N.B. thanks the Spanish MINECO for the financial support through the FPI program. Z.K. is grateful for the support from the Ministry of Education, Science, and Technological Development of the Republic of Serbia through Project No. III45018. B.D.E. and D.W.M. acknowledge support from the Center for Emergent Materials at the Ohio State University, a National Science Foundation Materials Research Science and Engineering Center (Grant No. DMR‐1420451)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spontaneous cationic ordering in chemicalsolution- grown La2CoMnO6 double perovskite thin films

  • Wang, Hailin
  • Gázquez, Jaume
  • Frontera, Carlos
  • Chisholm, Matthew F.
  • Pomar, Alberto
  • Martínez Perea, Benjamín
  • Mestres, Narcís
Double perovskite oxides are of interest because of their electric, magnetic, and elastic properties; however, these properties are strongly dependent on the ordered arrangement of cations in the double perovskite structure. Therefore, many efforts have been made to improve the level of cationic ordering to obtain optimal properties while suppressing antisite defect formation. Here, epitaxial double perovskite La2CoMnO6 thin films were grown on top of (001)-STO oriented substrates by a polymer-assisted deposition chemical solution approach. Confirmation of the achievement of full Co/Mn cationic ordering was found by scanning transmission electron microscopy (STEM) measurements; EELS maps indicated the ordered occupancy of B–B′ sites by Co/Mn cations. As a result, optimal magnetic properties (Msat ≈ 6 µB/f.u. and Tc ≈ 230 K) are obtained. We show that the slow growth rates that occur close to thermodynamic equilibrium conditions in chemical solution methods represent an advantageous alternative to physical deposition methods for the preparation of oxide thin films in which complex cationic ordering is involved., We acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496), COACHSUPENERGY project (MAT2014-51778-C2-1-R) and MAT2015-71664-R, cofinanced by the European Regional Development Fund. Support from the European Union′s Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie grant agreement no. 645658 (DAFNEOX Project) is also acknowledged. H.W. acknowledges financial support from the China Scholarship Council (CSC). J.G. also acknowledges the Ramon y Cajal program (RYC-2012-11709). The STEM–EELS analysis was sponsored by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division. The authors would like to thank Anna Crespi and Francesc Xavier Campos for assistance with the 3D reciprocal space tomography and reciprocal space map measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Trapping and electrical characterization of single core/shell iron-based nanoparticles in self-aligned nanogaps

  • Labra Muñoz, Jacqueline
  • Konstantinović, Z.
  • Balcells, Lluis
  • Pomar, Alberto
  • Zant, Herre S. J. van der
  • Dulić, Diana
We report on the fabrication and measurements of platinum-self-aligned nanogap devices containing cubed iron (core)/iron oxide (shell) nanoparticles (NPs) with two average different sizes (13 and 17 nm). The nanoparticles are deposited by means of a cluster gun technique. Their trapping across the nanogap is demonstrated by comparing the current vs voltage characteristics (I-Vs) before and after the deposition. At low temperature, the I-Vs can be well fitted to the Korotkov and Nazarov Coulomb blockade model, which captures the coexistence of single-electron tunneling and tunnel barrier suppression upon a bias voltage increase. The measurements thus show that Coulombblockaded devices can be made with a nanoparticle cluster source, which extends the existing possibilities to fabricate such devices to those in which it is very challenging to reduce the usual NP agglomeration given by a solution method., This study was supported by the EU Horizon 2020 research and innovation program under the Marie-Sklodowska-Curie Grant Agreement No. 645658 (DAFNEOX Project), by two FONDECYT REGULAR Grant Nos. 1181080 and 1161775, and by two FONDEQUIP Grant Nos. EQM140055 and EQM180009. We thank the Spanish Ministry of Science, Innovation and Universities (Project Nos. MAT2015-71664-R and RTI2018-099960-B-I00) and the Serbian Ministry of Education, Science and Technological Development (Project No. III45018) for their support. A.P. and Z.K. thank Senzor-INFIZ (Serbia) for the cooperation provided during their respective secondments., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Resistive Switching in Semimetallic SrIrO3 Thin Films

  • Fuentes, Víctor
  • Vasić, Borislav
  • Konstantinović, Z.
  • Martínez Perea, Benjamín
  • Balcells, Lluis
  • Pomar, Alberto
Local electrical properties, measured by conductive atomic force microscopy, of semimetallic SrIrO3 thin films are reported. The appearance of an Anderson-type metal–insulator transition (MIT) triggered by disorder and spatial localization due to film thickness reduction is analyzed as well as their influence on the resistive switching behavior. For thin enough films (below ∼3 nm) samples are insulating with hysteretic I–V curves indicative of reversible resistive switching behavior between two states of clearly different resistance at room temperature. A sharp transition into a low resistance state (LRS), i.e., an abrupt increase of the current intensity, is detected above a well-defined threshold voltage indicative of localization of charge carriers. On the other hand, thicker samples exhibit a semimetallic character, and I–V curves show progressive changes of the local resistance without a clearly defined threshold voltage, thus evidencing the absence of a MIT transition with a well-defined resistance jump between the different resistance states., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa Program (SEV-2015-04969), MAT2015-71664-R (HETEROCS), and RTI2018-099960-B-I00 (SPINCURIOX) and funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement no. 645658 (DAFNEOX Project) and FEDER Program. B.V. and Z.K. acknowledge the support of the Serbian Ministry of Education, Science and Technological Development (projects OI171005 and III45018)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Spontaneous in-flight assembly of magnetic nanoparticles into macroscopic chains

  • Balcells, Lluis
  • Stanković, Igor
  • Konstantinović, Z.
  • Alagh, Aanchal
  • Fuentes, Víctor
  • López Mir, Laura
  • Oró, Judith
  • Mestres, Narcís
  • García Izquierdo, Carlos
  • Pomar, Alberto
  • Martínez Perea, Benjamín
Knowing the interactions controlling aggregation processes in magnetic nanoparticles is of strong interest in preventing or promoting nanoparticles’ aggregation at wish for different applications. Dipolar magnetic interactions, proportional to the particle volume, are identified as the key driving force behind the formation of macroscopic aggregates for particle sizes above about 20 nm. However, aggregates’ shape and size are also strongly influenced by topological ordering. 1-D macroscopic chains of several micrometer lengths are obtained with cube-shaped magnetic nanoparticles prepared by the gas-aggregation technique. Using an analytical model and molecular dynamics simulations, the energy landscape of interacting cube-shaped magnetic nanoparticles is analysed revealing unintuitive dependence of the force acting on particles with the displacement and explaining pathways leading to their assembly into long linear chains. The mechanical behaviour and magnetic structure of the chains are studied by a combination of atomic and magnetic force measurements, and computer simulation. The results demonstrate that [111] magnetic anisotropy of the cube-shaped nanoparticles strongly influences chain assembly features., The authors acknowledge the financial support from European Commission H2020 project DAFNEOX (Grant No. 645658). I. S. and Z. K. acknowledge the support of Ministry of Education, Science, and Technological Development of Republic of Serbia – projects ON171017 and III45018. Financial support from Spanish Ministry of Economy and Competitiveness through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496), RTI2018-099960-B-I00, and MAT2015-71664-R, co-financed by the European Regional Development Fund, is gratefully acknowledged. I.S. and C.G. acknowledge the financial support received from Proyecto CONICYT PIA/Basal FB 0821 and CONICYT MEC80170122. A.P., V.F. and Z.K. thank Senzor-INFIZ (Serbia) for the cooperation provided during their respective secondments. Numerical calculations were run on the PARADOX supercomputing facility at the Scientific Computing Laboratory of the Institute of Physics Belgrade., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nonstoichiometry Driven Ferromagnetism in Double Perovskite La2Ni1−xMn1+xO6 Insulating Thin Films

  • Bernal Salamanca, Mónica E.
  • Konstantinović, Z.
  • Balcells, Lluis
  • Pannunzio Miner, Elisa V.
  • Sandiumenge, Felip
  • López Mir, Laura
  • Bozzo, Bernat
  • Herrero Martín, Javier
  • Pomar, Alberto
  • Frontera, Carlos
  • Martínez Perea, Benjamín
In this work we report on the epitaxial growth of La2NiMnO6 double perovskite thin films on top of (001) oriented SrTiO3 substrates by RF magnetron sputtering. The influence of oxygen pressure (PO2 ) and growth temperature on the microstructure, stoichiometry of the films, and magnetic and transport properties is thoroughly investigated. It is found that high oxygen pressure promotes the growth of stoichiometric films, with a Ni/Mn ratio almost equal to 1. However, these films exhibit poor ferromagnetic properties with respect to the expected optimum values corresponding to ferromagnetic ordering mediated by superexchange interaction between Mn4+ and Ni2+ according to the Goodenough-Kanamori rules. Most interestingly, films grown at low PO2 exhibit Ni/Mn ratios below 1, but ferromagnetic properties close to the optimal ones. The valence balance between Ni and Mn ions in nonstoichiometric sample has been elucidated by X-ray absorption spectroscopy. The results indicate that Ni deficiency plays a crucial role in the puzzling insulating ferromagnetic behavior observed in nonstoichiometric samples., M.B.-S., Ll.B., F.S., B.B., C.F., B.M., and A.P. acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), and Project MAT2015-71664-R. This work has received funding from the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie Grant Agreement No. 645658 (DAFNEOX Project). Z.K. acknowledge the support of the Serbian Ministry of Education, Science and Technological Development (III45018). Authors thank ALBA synchrotron (Spain) for the provision of beamtime., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards Oxide Electronics: a Roadmap

  • Coll, Mariona
  • Fontcuberta, Josep
  • Althammer, M.
  • Bibes, Manuel
  • Boschker, H.
  • Calleja Lázaro, Alberto
  • Cheng, G.
  • Cuoco, M.
  • Dittmann, Regina
  • Dkhil, B.
  • El Baggari, I.
  • Fanciulli, M.
  • Fina, Ignasi
  • Fortunato, E.
  • Frontera, Carlos
  • Fujita, S.
  • García, V.
  • Goennenwein, S.T.B.
  • Granqvist, C.-G.
  • Grollier, J.
  • Gross, R.
  • Hagfeldt, A.
  • Herranz, Gervasi
  • Hono, K.
  • Houwman, E.
  • Huijben, M.
  • Kalaboukhov, A.
  • Keeble, D.J.
  • Koster, G.
  • Kourkoutis, L.F.
  • Levy, J.
  • Lira-Cantú, Mónica
  • MacManus-Driscoll, J.L.
  • Mannhart, Jochen
  • Martins, R.
  • Menzel, S.
  • Mikolajick, T.
  • Napari, M.
  • Nguyen, M.D.
  • Niklasson, G.
  • Paillard, C.
  • Panigrahi, S.
  • Rijnders, G.
  • Sánchez Barrera, Florencio
  • Sanchis, P.
  • Sanna, S.
  • Schlom, Darrell G.
  • Schroeder, U.
  • Shen, K.M.
  • Siemon, A.
  • Spreitzer, M.
  • Sukegawa, H.
  • Tamayo, R. R.
  • Brink, J. van den
  • Pryds, N.
  • Miletto Granozio, F.
At the end of a rush lasting over half a century, in which CMOS technology has been experiencing a constant and breathtaking increase of device speed and density, Moore’s law is approaching the insurmountable barrier given by the ultimate atomic nature of matter. A major challenge for 21st century scientists is finding novel strategies, concepts and materials for replacing silicon-based CMOS semiconductor technologies and guaranteeing a continued and steady technological progress in next decades. Among the materials classes candidate to contribute to this momentous challenge, oxide films and heterostructures are a particularly appealing hunting ground. The vastity, intended in pure chemical terms, of this class of compounds, the complexity of their correlated behaviour, and the wealth of functional properties they display, has already made these systems the subject of choice, worldwide, of a strongly networked, dynamic and interdisciplinary research community. Oxide science and technology has been the target of a wide four-year project, named Towards Oxide-Based Electronics (TO-BE), that has been recently running in Europe and has involved as participants several hundred scientists from 29 EU countries. In this review and perspective paper, published as a final deliverable of the TO-BE Action, the opportunities of oxides as future electronic materials for Information and Communication Technologies ICT and Energy are discussed. The paper is organized as a set of contributions, all selected and ordered as individual building blocks of a wider general scheme. After a brief preface by the editors and an introductory contribution, two sections follow. The first is mainly devoted to providing a perspective on the latest theoretical and experimental methods that are employed to investigate oxides and to produce oxide-based films, heterostructures and devices. In the second, all contributions are dedicated to different specific fields of applications of oxide thin films and heterostructures, in sectors as data storage and computing, optics and plasmonics, magnonics, energy conversion and harvesting, and power electronics., The authors acknowledge financial support from the Netherlands Organization for Scientific Research (NWO). We acknowledge fruitful interactions with our many collaborators in the realm of artificial quantum materials, especially the groups of J.C. Séamus Davis, Craig J. Fennie, Eun-Ah Kim, Lena F. Kourkoutis, and David A. Muller. This work was supported by the National Science Foundation (Platform for the Accelerated Realization, Analysis, and Discovery of Interface Materials (PARADIM)) under Cooperative Agreement No. DMR-1539918. Financial support from the Spanish Ministry of Economy and Competitiveness (SEV-2015-0496, MAT2014-56063-C2-1-R, and MAT2017-85232-R), from Generalitat de Catalunya (2014 SGR 734), and from Slovenian Research Agency (P2-0091 and J2-6759) is acknowledged. The authors acknowledge funding from the EPSRC grant EP/ P027032/1. Prof. O. Nilsen is acknowledged for valuable discussions on the current status of ALD perovskites. Author thanks fruitful discussions with Dr. J. Santiso. Financial support from the Spanish Ministry of Economy and Competitiveness through the ''Severo Ochoa" Programme for Centres of Excellence in R&D (SEV-2015-0496), and projects MAT2015-71664-R and MAT2015- 67593-P is acknowledged. This work was supported by PARADIM, a National Science Foundation Materials Innovation Platform (Grant DMR-1539918), and by the Air Force Office of Scientific Research (Award number FA 9550-16-1-0305). Funding from the DFG (German Science Foundation) within the collaborative research center SFB 917 'Nanoswitches' and the W2/ W3 program of the Helmholtz association is gratefully acknowledged. We furthermore acknowledge funding by the ToBE CoST action (MP1308). We acknowledge financial support from the ERC Consolidator grant ‘‘MINT” (contract number n° 615759) and the ANR project ‘‘FERROMON”. This publication has received funding from the European Union’s Horizon 2020 research innovation programme under grant agreement 732642 (ULPEC project). This work is supported by a public grant overseen by the French National Research Agency (ANR) as part of the ‘‘Investissements d’Avenir” program (Labex NanoSaclay, reference: ANR-10-LABX-0035). This work was supported in part by the EFRE fund of the European Commission, by the Free State of Saxony (Germany), and by funding of the Deutsche Forschungsgemeinschaft (DFG project: Inferox). This work was supported in parts by the Deutsche Forschungsge-meinschaft (DFG) under Grant SFB 917 ''Nanoswitches" and the COST Action MP1308 ''TO-BE (Towards Oxide-Based Electronics)". This publication has received funding from the European Union’s Horizon 2020 research innovation programme under grant agree-ment 732642 (ULPEC project). We thank M. Belmoubarik and J. Uzuhashi for their technical assistance for Fig. 36. We acknowledge support from the ImPACT Program of Council for Science, Technology and Innovation, Japan. Gervasi Herranz acknowledges financial support from MAT2014-56063-C2-1-R and Severo Ochoa SEV-2015-0496 Projects, and the Generalitat de Catalunya (2014 SGR 734Project). Pablo Sanchis acknowledges financial support from TEC2016-76849 and FP7-ICT-2013-11-619456 SITOGA. We thank the financial support from the SNSF NRP70 ‘‘Energy Turnaround” and GRAPHENE project supported by the European Commission Seventh Framework Programme under contract 604391 is gratefully acknowledged. To the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295; for the grant ENE2016-79282-C5-2-R and the OrgEnergy Excelence NetworkCTQ2016-81911-REDT. To the Agència de Gestió d’Ajuts Universitaris i de Recerca for the support to the consolidated Catalonia research group 2014SGR-1212 and the Xarxa de Referència en Materials Avançats per a l’Energia (Xarmae). To the CERCA Pro-gramme/Generalitat de Catalunya and to the European COST Action StableNextSol project MP1307. The authors would like to acknowledge the financial support from ACCIO-Generalitat de Catalunya and the European Union for the 3D-PHOTOXIDES ERA-NET MANUNET II and from IV Fondo de Emprendedores of Fundación Repsol for the SOLAR OXIDES project. The authors would also thank Mr. Andrés Gómez from Institut de Ciència de Materials de Barcelona (ICMAB) for the pc-AFM measure-ments and Mr. Alex Hernández from Institut de Recerca en Energia de Catalunya (IREC) for the sputtering and valuable guidance. We would like to acknowledge the financial support granted by the Spanish Government [Projects MAT2014-56063-C2-1-R, MAT2015-73839-JIN, MAT2014-51778-C2-1-R and MAT2014-57960-C3-1-R, and associated FEDER], I.F. acknowledges Ramon y Cajal contract RYC-2017-22531, the Generalitat de Catalunya (2014-SGR-734). ICMAB-CSIC authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness, through the ‘‘Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496). C.P. and B.D. acknowledge a public grant overseen by the French National Research Agency (ANR) as part of the ‘‘Investissements d’Avenir” program (Grant No. ANR-10-LABX-0035, Labex NanoSaclay). The authors would like to acknowledge L. Pereira and P. Bar-quinha for fruitful discussions during the manuscript preparation. We acknowledge the funding from Portuguese Foundation for Science and Technology, Reference UID/CTM/50025/2013 and FEDER funds through the COMPETE 2020 Programme under the project number POCI-01-0145-FEDER-007688. Part of this work is partially financed from European Community H2020 program under grant agreements No. 665046 (project Symbiotic) and No. 644631 (project Roll-Out). Several of the recent advances in electrochromic and ther-mochromic materials, reported above, were reached with financial support received from the European Research Council under the European Community’s Seventh Framework Program (FP2007– 2013)/ERC Grant Agreement No. 267234 (‘‘GRINDOOR”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dynamic magnetic properties and spin pumping in polymer-assisted-deposited La0.92MnO3 thin films

  • Wang, Hailin
  • Pomar, Alberto
  • Martin Rio, Sergi
  • Frontera, Carlos
  • Mestres, Narcís
  • Martínez Perea, Benjamín
Complex oxide thin films grown by using chemical methods are of strong interest because of their low-cost, environment friendly fabrication and easy scalability. However, their introduction in spintronic applications or magnetic devices is still scarce mainly because of concerns regarding their interfacial quality. Here, we report on the preparation by polymer-assisted-deposition (PAD) of epitaxial La0.92MnO3 (LMO) thin films. We demonstrate that ferromagnetic conducting LMO thin films with smooth surfaces (rms ∼ 0.2 nm) can be prepared by PAD. By means of temperature-dependent broadband ferromagnetic resonance (FMR), we show that the LMO film exhibits a four-fold in-plane anisotropy, with [110] being the easy in-plane axis, compatible with strain release from the rhombohedral bulk phase. It has also been found that the isotropic Gilbert damping, α, determined from the broadening of the FMR linewidth, does not show a relevant extrinsic contribution and it exhibits an intraband-like temperature dependence, i.e. it increases as temperature decreases. By capping LMO thin films with a 10 nm thick Pt layer deposited ex situ, damping is substantially enhanced, from a value at 150 K of αLMO ∼ 1 × 10−2 for the bare LMO film to αLMO+Pt ∼ 2.5 × 10−2 for the Pt capped film. This strong increase of magnetic damping is indicative of the transfer of spin momentum from LMO to the Pt layer by spin pumping. Our results demostrate that LMO films grown by PAD may be used as efficient spin source systems in heterostructures for spintronic devices., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa (SEV-2015-04969), HETEROCS (MAT2015-71664-R), SUMATE (RTI2018-095853-B-C21) and SPINCURIOX (RTI2018-099960-B-I00) projects cofinanced by the European Regional Development Fund. This project has received funding from the European Union through the Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 645658 (DAFNEOX Project) and through the FEDER Program. Hailin Wang acknowledges financial support from the China Scholarship Council (CSC). This work has been performed in the framework of the PhD programme in Materials Science of the Universitat Autònoma de Barcelona, through the China Scholarships Council (CSC)/Universitat Autònoma de Barcelona (UAB) Joint Scholarship. Authors thank Dr B. Bozzo and F. J. Campos for their technical support during magnetic and X-ray diffraction measurements. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanoscale mechanical control of surface electrical properties of manganite films with magnetic nanoparticles

  • Vasić, Borislav
  • Konstantinović, Z.
  • Pannunzio Miner, Elisa V.
  • Valencia, Sergio
  • Abrudan, Radu
  • Gajić, Rados
  • Pomar, Alberto
Mechanical control of electrical properties in complex heterostructures, consisting of magnetic FeOx nanoparticles on top of manganite films, is achieved using atomic force microscope (AFM) based methods. Under applied pressure of the AFM tip, drop of the electrical conductivity is observed inducing an electrically insulating state upon a critical normal load. Current and surface potential maps suggest that the switching process is mainly governed by the flexoelectric field induced at the sample surface. The relaxation process of the electrical surface potential indicates that the diffusion of oxygen vacancies from the bulk of the manganite films towards the sample surface is the dominant relaxation mechanism. The magnetic FeOx nanoparticles, staying attached to the sample surface after the rubbing, protect the underlying manganite films and provide stability of the observed resistive switching effect. The employed mechanical control gives a new freedom in the design of resistive switching devices since it does not depend on the film thickness, and biasing is not needed., B. V. and Z. K. acknowledge the support of the Serbian Ministry of Education, Science and Technological Development (Projects No. OI171005 and III45018). E. P.-M. and A. P. acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), and project MAT2015-71664 R. This work has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 645658 (DAFNEOX Project). B. V. thanks Dimitrije Stepanenko for fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Atomic resolution imaging and quantitative elemental mapping of the misfit dislocation core phase in multicomponent oxides

  • Bagués, Núria
  • Santiso, José
  • Esser, Bryan D.
  • Williams, Robert E. A.
  • McComb, Dave W.
  • Konstantinović, Z.
  • Balcells, Lluis
  • Sandiumenge, Felip
N.B. thanks the Spanish MINECO for the financial support through the FPI program. This research was funded by Spanish MINECO (Grant Numbers: SEV-2015-0496, MAT2015-71664-R, SEV-2013-0295), European Union Horizon 2020 research and innovation programme (Grant Number: 645658), Generalitat de Catalunya (Grant Numbers: 2014 SGR 501, 2014 SGR 1216). B.D.E. and D.W.M. acknowledge support from the Center for Emergent Materials at the Ohio State University, a National Science Foundation Materials Research Science and Engineering Center (Grant Number: DMR1420451)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Uptake of Sb(V) by Nano Fe3O4-Decorated Iron Oxy-Hydroxides

  • Simeonidis, Konstantinos
  • Kalaitzidou, Kyriaki
  • Kaprara, Efthimia
  • Mitraka, Georgia
  • Asimakidou, Theopoula
  • Balcells, Lluis
  • Mitrakas, Manassis
The presence of antimony in water remains a major problem for drinking water technology, defined by the difficulty of available adsorbents to comply with the very low regulation limit of 5 µg/L for the dominant Sb(V) form. This study attempts to develop a new class of water adsorbents based on the combination of amorphous iron oxy-hydroxide with Fe3O4 nanoparticles and optimized to the sufficient uptake of Sb(V). Such a Fe3O4/FeOOH nanocomposite is synthesized by a two-step aqueous precipitation route from iron salts under different oxidizing and acidity conditions. A series of materials with various contents of Fe3O4 nanoparticles in the range 0–100 wt % were prepared and tested for their composition, and structural and morphological features. In order to evaluate the performance of prepared adsorbents, the corresponding adsorption isotherms, in the low concentration range for both Sb(III) and Sb(V), were obtained using natural-like water. The presence of a reducing agent such as Fe3O4 results in the improvement of Sb(V) uptake capacity, which is found around 0.5 mg/g at a residual concentration of 5 µg/L. The intermediate reduction of Sb(V) to Sb(III) followed by Sb(III) adsorption onto FeOOH is the possible mechanism that explains experimental findings., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Switching on superferromagnetism

  • Arora, A.
  • Phillips, L. C.
  • Nukala, P.
  • Ben Hassine, M.
  • Ünal, A. A.
  • Dkhil, B.
  • Balcells, Lluis
  • Iglesias-Freire, Óscar
  • Barthélémy, Agnès
  • Kronast, Florian
  • Bibes, Manuel
  • Valencia, Sergio
Recent results in electric-field control of magnetism have paved the way for the design of alternative magnetic and spintronic devices with enhanced functionalities and low power consumption. Among the diversity of reported magnetoelectric effects, the possibility of switching on and off long-range ferromagnetic ordering close to room temperature stands out. Its binary character opens up the avenue for its implementation in magnetoelectric data storage devices. Here we show the possibility to locally switch on superferromagnetism in a wedge-shaped polycrystalline Fe thin film deposited on top of a ferroelectric and ferroelastic BaTiO 3 substrate. A superparamagnetic to superferromagnetic transition is observed for confined regions for which a voltage applied to the ferroelectric substrate induces a sizable strain. We argue that electric-field-induced changes of magnetic anisotropy lead to an increase of the critical temperature separating the two regimes so that superparamagnetic regions develop collective long-range superferromagnetic behavior., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A Multiscale Perspective on Misfit Dislocations in Oxide Films

  • Sandiumenge, Felip
Since misfit dislocations were first conceived by Jan H. van der Merwe in 1949 (Frank and van der Merwe, 1949), their appreciation by the scientific community has evolved from being considered a drawback to being recognized as a challenging opportunity. However, taking full advantage of all their potential sets out issues that, despite being well-established in semiconductor or metals, remain poorly understood in transition metal oxides. In this Perspective contribution we select recent findings on misfit dislocations in La0.7Sr0.3MnO3 under compressive strain to illustrate effects spanning a range of length scales like the coupling between strain and defect chemistry in and around their cores, the impact of kinetics on the morphology of dislocated films, or the subtle sensitivity of oxide properties to dislocation strain fields., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Topochemical nitridation of Sr2FeMoO6

  • Ceravola, Roberta
  • Frontera, Carlos
  • Oró, Judith
  • Black, Ashley P.
  • Ritter, Clemens
  • Mata, Ignasi
  • Molins, Elies
  • Fontcuberta, Josep
  • Fuertes, Amparo
The topotactic nitridation of cation ordered, tetragonal Sr2FeMoO6 in NH3 at moderate temperatures leads to cubic, Fm[3 with combining macron]m double perovskite oxynitride Sr2FeMoO4.9N1.1 where double-exchange interactions determine ferromagnetic order with TC ≈ 100 K. Substitution of oxide by nitride induces bond asymmetries and local electronically driven structural distortions, which combined with Fermi level lowering restricts charge itinerancy to confined regions and preclude spontaneous long-range magnetic order. Under a magnetic field, ferromagnetic correlations expand, favoring charge delocalization and a negative magnetoresistance is observed., This work was supported by the Spanish Ministerio de Ciencia, Universidades e Investigación, Spain (Projects MAT2017-86616-R, MAT2017-85232-R, MAT2015-71664-R, MAT2015-67593-P and ENE2015-63969) and by Generalitat de Catalunya (2017SGR1377, 2017SGR581). ICMAB acknowledges financial support from MINECO through the Severo Ochoa Program (SEV-2015-0496). We thank the Institut Laue Langevin (ILL) and Alba synchrotron for the provision of beam time., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Resistive switching in Strontium iridate based thin films

  • Fuentes, Víctor
  • Vasić, Borislav
  • Konstantinović, Z.
  • Martínez Perea, Benjamín
  • Balcells, Lluis
  • Pomar, Alberto
We report on the local electrical properties, measured by conductive atomic force microscopy, of the Iridate-based Srn+1IrnO3n+1 family of thin films, in particular by comparing the n = 1, Sr2IrO4, and the n = ∞, SrIrO3, phases. We analyze the different resistive switching behavior as a function of the pristine electronic properties of the films. We will show that, for films exhibiting insulating behavior, i.e., films of the n = 1 phase or films below 3 nm of thickness for the n = ∞ phase, hysteretic I–V curves with a sharp transition into a low resistance state (LRS), i.e. an abrupt increase of the current intensity, is detected above a well-defined threshold voltage. This suggests a resistive switching behavior associated to the jump between two resistance states that may be correlated to the activation energy, Δ, obtained by fitting the temperature dependence of the resistivity to a thermal activated Arrhenius law, ρ (T) ~ ρ0exp(−Δ/kBT). On the other hand, thicker samples of the n = ∞ phase exhibit a semimetallic character and I–V curves show progressive changes of the local resistance without a clearly defined threshold voltage. Kelvin Probe Force Microscopy based measurements confirmed that, concomitantly to the resistive switching, an evolution of the electronic states at the surface takes place that may be associated to the migration of oxygen vacancies promoted by the electrical fields under the AFM tip., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa Program (SEV-2015-04969), MAT2015-71664-R (HETEROCS) and RTI2018-099960-B-I00 (SPINCURIOX) and funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 645658 (DAFNEOX Project) and FEDER Program. B.V. and Z.K. acknowledge the support of the Serbian Ministry of Education, Science and Technological Development (Projects No. OI171005 and III45018). A.P., V.F. and Z.K. thank Senzor-INFIZ (Serbia) for the cooperation provided during their respective secondments., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Temperature dependence of spin pumping and inverse spin Hall effect in permalloy/Pt bilayers

  • Martin Rio, Sergi
  • Pomar, Alberto
  • Balcells, Lluis
  • Bozzo, Bernat
  • Frontera, Carlos
  • Martínez Perea, Benjamín
The temperature dependence of the spin pumping process in Fe80Ni20 (Py)/Pt bilayers is analyzed for different Pt capping layer thickness. Samples have been grown by means of dc magnetron sputtering, at room temperature, on top of Si substrates. In order to get an optimized interface between the Py and the Pt layers, the Pt capping layers were deposited In situ. The values of the damping constant, α, obtained for the Py alone samples, around 0.007 at RT, make evident the good quality of the samples. The increase of α due to spin pumping into the Pt layer is clearly appreciated; α values in Py/Pt bilayers are twice the value in Py alone. Spin pumping is confirmed by direct measurements of the inverse spin Hall effect (ISHE) voltage signal (VISHE) measured across the samples. To separate ISHE and spin rectification contributions to VISHE the line shape analysis method has been used and the conditions for its applicability thoroughly discussed. VISHE increases almost linearly on lowering temperature for all the frequencies investigated and smoothly increases as frequency decreases showing roughly a linear dependence with the inverse of the frequency. The Pt layer thickness dependence of α and VISHE suggest a low interfacial spin mixing conductance and high spin memory loss., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through Severo Ochoa Program (SEV-2015-04969), MAT2015-71664-R and RTI2018-099960-B-I00 and funding from the EU (European Union) Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 645658 (DAFNEOX Project) and FEDER Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Anisotropic sensor and memory device with a ferromagnetic tunnel barrier as the only magnetic element

  • López Mir, Laura
  • Frontera, Carlos
  • Aramberri, Hugo
  • Bouzehouane, Karim
  • Cisneros-Fernández, J
  • Bozzo, Bernat
  • Balcells, Lluis
  • Martínez Perea, Benjamín
Multiple spin functionalities are probed on Pt/La2Co0.8Mn1.2O6/Nb:SrTiO3, a device composed by a ferromagnetic insulating barrier sandwiched between non-magnetic electrodes. Uniquely, La2Co0.8Mn1.2O6 thin films present strong perpendicular magnetic anisotropy of magnetocrystalline origin, property of major interest for spintronics. The junction has an estimated spin-filtering efficiency of 99.7% and tunneling anisotropic magnetoresistance (TAMR) values up to 30% at low temperatures. This remarkable angular dependence of the magnetoresistance is associated with the magnetic anisotropy whose origin lies in the large spin-orbit interaction of Co2+ which is additionally tuned by the strain of the crystal lattice. Furthermore, we found that the junction can operate as an electrically readable magnetic memory device. The findings of this work demonstrate that a single ferromagnetic insulating barrier with strong magnetocrystalline anisotropy is sufficient for realizing sensor and memory functionalities in a tunneling device based on TAMR., We acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496), and project MAT2015-71664-R; and from EU FEDER program. Fruitful discussions with Dr. C. Ocal are acknowledged., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tunneling anisotropic magnetoresistance in La2/3Sr1/3MnO3/LaAlO3/Pt tunnel junctions

  • Galceran, Regina|||0000-0002-2080-2575
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Pomar, Alberto|||0000-0002-5855-2356
  • Konstantinovic, Zorica|||0000-0002-6871-7038
  • Bagués, Núria|||0000-0002-9360-0915
  • Sandiumenge Ortiz, Felip|||0000-0003-1336-1529
  • Martínez, Benjamín|||0000-0001-9879-7748
The magnetotransport properties of La2/3 Sr1/3 MnO3 (LSMO)/ LaAlO3 (LAO)/Pt tunneling junctions have been analyzed as a function of temperature and magnetic field. The junctions exhibit magnetoresistance (MR) values of about 37%, at H=90 kOe at low temperature. However, the temperature dependence of MR indicates a clear distinct origin than that of conventional colossal MR. In addition, tunneling anisotropic MR (TAMR) values around 4% are found at low temperature and its angular dependence reflects the expected uniaxial anisotropy. The use of TAMR response could be an alternative of much easier technological implementation than conventional MTJs since only one magnetic electrode is required, thus opening the door to the implementation of more versatile devices. However, further studies are required in order to improve the strong temperature dependence at the present stage.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Misfit Dislocation Guided Topographic and Conduction Patterning in Complex Oxide Epitaxial Thin Films

  • Sandiumenge Ortiz, Felip|||0000-0003-1336-1529
  • Bagués, Núria|||0000-0002-9360-0915
  • Santiso, José|||0000-0003-4274-2101
  • Paradinas, Markos|||0000-0003-1006-9506
  • Pomar, Alberto|||0000-0002-5855-2356
  • Konstantinovic, Zorica|||0000-0002-6871-7038
  • Ocal García, Carmen|||0000-0001-8790-8844
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Casanove, Marie-Jo
  • Martínez, Benjamín|||0000-0001-9879-7748
Interfacial dissimilarity has emerged in recent years as the cornerstone of emergent interfacial phenomena, while enabling the control of electrical transport and magnetic behavior of complex oxide epitaxial films. As a step further toward the lateral miniaturization of functional nanostructures, this work uncovers the role of misfit dislocations in creating periodic surface strain patterns that can be efficiently used to control the spatial modulation of mass transport phenomena and bandwidth-dependent properties on a ≈20 nm length scale. The spontaneous formation of surface strain-relief patterns in LaSrMnO/LaAlO films results in lateral periodic modulations of the surface chemical potential and tetragonal distortion, controlling the spatial distribution of preferential nucleation sites and the bandwidth of the epilayer, respectively. These results provide insights into the spontaneous formation of strain-driven ordered surface patterns, topographic and functional, during the growth of complex oxide heterostructures on lengths scales far below the limits achievable through top-down approaches.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Formation of Self-Organized Mn3O4 Nanoinclusions in LaMnO3 Films

  • Pomar, Alberto|||0000-0002-5855-2356
  • Konstantinovic, Zorica|||0000-0002-6871-7038
  • Bagués, Núria|||0000-0002-9360-0915
  • Roqueta, Jaume
  • López-Mir, Laura|||0000-0002-5279-8849
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Frontera, Carlos|||0000-0002-0091-4756
  • Mestres i Andreu, Narcís|||0000-0001-6468-4227
  • Gutiérrez Llorente, Araceli
  • Scepanovic, Maja
  • Lazarevic, Nenad
  • Popovic, Zoran V.
  • Sandiumenge Ortiz, Felip|||0000-0003-1336-1529
  • Martínez, Benjamín|||0000-0001-9879-7748
  • Santiso, José|||0000-0003-4274-2101
We present a single-step route to generate ordered nanocomposite thin films of secondary phase inclusions (Mn3O4) in a pristine perovskite matrix (LaMnO3) by taking advantage of the complex phase diagram of manganese oxides. We observed that in samples grown under vacuum growth conditions from a single LaMnO3 stoichiometric target by Pulsed Laser Deposition, the most favorable mechanism to accommodate Mn2+ cations is the spontaneous segregation of self-assembled wedge-like Mn3O4 ferrimagnetic inclusions inside a LaMnO3 matrix that still preserves its orthorhombic structure and its antiferromagnetic bulk-like behavior. A detailed analysis on the formation of the self-assembled nanocomposite films evidences that Mn3O4 inclusions exhibit an epitaxial relationship with the surrounding matrix that it may be explained in terms of a distorted cubic spinel with slight (~9°) c-axis tilting. Furthermore, a Ruddlesden-Popper La2MnO4 phase, helping to the stoichiometry balance, has been identified close to the interface with the substrate. We show that ferrimagnetic Mn3O4 columns influence the magnetic and transport properties of the nanocomposite by increasing its coercive field and by creating local areas with enhanced conductivity in the vicinity of the inclusions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Topochemical nitridation of Sr2FeMoO6

  • Ceravola, Roberta|||0000-0002-3785-3854
  • Frontera, Carlos|||0000-0002-0091-4756
  • Oró-Solé, Judith|||0000-0002-3755-4950
  • Black Serra, Ashley Phillip|||0000-0001-7929-5144
  • Ritter, Clemens
  • Mata, Ignasi|||0000-0002-4835-9659
  • Molins Grau, Elies|||0000-0003-1012-0551
  • Fontcuberta, Josep|||0000-0002-7955-2320
  • Fuertes, Amparo|||0000-0001-5338-9724
The topotactic nitridation of cation ordered, tetragonal SrFeMoO in NH at moderate temperatures leads to cubic, Fm3m double perovskite oxynitride SrFeMoON where double-exchange interactions determine ferromagnetic order with T ≈ 100 K. Substitution of oxide by nitride induces bond asymmetries and local electronically driven structural distortions, which combined with Fermi level lowering restricts charge itinerancy to confined regions and preclude spontaneous long-range magnetic order. Under a magnetic field, ferromagnetic correlations expand, favoring charge delocalization and a negative magnetoresistance is observed.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Nonstoichiometry driven ferromagnetism in double perovskite La2Ni1-xMn1+ xO6 insulating thin films

  • Bernal Salamanca, Mónica Emperatriz
  • Konstantinovic, Zorica|||0000-0002-6871-7038
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Pannunzio-Miner, Elisa
  • Sandiumenge Ortiz, Felip|||0000-0003-1336-1529
  • Lopez-Mir, Laura
  • Bozzo, Bernat
  • Herrero-Martín, Javier|||0000-0003-1986-8128
  • Pomar, Alberto|||0000-0002-5855-2356
  • Frontera, Carlos|||0000-0002-0091-4756
  • Martínez, Benjamín|||0000-0001-9879-7748
In this work we report on the epitaxial growth of LaNiMnO double perovskite thin films on top of (001) oriented SrTiO substrates by RF magnetron sputtering. The influence of oxygen pressure (P O) and growth temperature on the microstructure, stoichiometry of the films, and magnetic and transport properties is thoroughly investigated. It is found that high oxygen pressure promotes the growth of stoichiometric films, with a Ni/Mn ratio almost equal to 1. However, these films exhibit poor ferromagnetic properties with respect to the expected optimum values corresponding to ferromagnetic ordering mediated by superexchange interaction between Mn and Ni according to the Goodenough-Kanamori rules. Most interestingly, films grown at low P O exhibit Ni/Mn ratios below 1, but ferromagnetic properties close to the optimal ones. The valence balance between Ni and Mn ions in nonstoichiometric sample has been elucidated by X-ray absorption spectroscopy. The results indicate that Ni deficiency plays a crucial role in the puzzling insulating ferromagnetic behavior observed in nonstoichiometric samples.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Isothermal anisotropic magnetoresistance in antiferromagnetic metallic IrMn

  • Galceran, Regina|||0000-0002-2080-2575
  • Fina, Ignasi|||0000-0003-4182-6194
  • Cisneros-Fernández, Jose|||0000-0002-5497-7103
  • Bozzo, Bernat
  • Frontera, Carlos|||0000-0002-0091-4756
  • López-Mir, Laura|||0000-0002-5279-8849
  • Deniz, Hakan
  • Park, K.-W.
  • Park, B.-G.
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Martí, X.
  • Jungwirth, Tomas|||0000-0002-9910-1674
  • Martínez, Benjamín|||0000-0001-9879-7748
Antiferromagnetic spintronics is an emerging field; antiferromagnets can improve the functionalities of ferromagnets with higher response times, and having the information shielded against external magnetic field. Moreover, a large list of aniferromagnetic semiconductors and metals with Néel temperatures above room temperature exists. In the present manuscript, we persevere in the quest for the limits of how large can anisotropic magnetoresistance be in antiferromagnetic materials with very large spin-orbit coupling. We selected IrMn as a prime example of first-class moment (Mn) and spin-orbit (Ir) combination. Isothermal magnetotransport measurements in an antiferromagnetic-metal(IrMn)/ferromagnetic-insulator thin film bilayer have been performed. The metal/insulator structure with magnetic coupling between both layers allows the measurement of the modulation of the transport properties exclusively in the antiferromagnetic layer. Anisotropic magnetoresistance as large as 0.15% has been found, which is much larger than that for a bare IrMn layer. Interestingly, it has been observed that anisotropic magnetoresistance is strongly influenced by the field cooling conditions, signaling the dependence of the found response on the formation of domains at the magnetic ordering temperature.