Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 192
Encontrada(s) 2 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Observador de alta ganancia con zona muerta ajustable para estimar la saturación de agua líquida en pilas de combustible tipo PEM, High gain observer with dynamic deadzone to estimate liquid water saturation in PEM fuel cells

  • Cecilia, A.
  • Costa-Castelló, R.
[EN] In the area of PEM fuel cells, water management remains one of the most challenging issues affecting PEMFC efficiency and lifetime. Liquid water active control and supervision techniques are limited by the absence of online sensors that can estimate the liquid water saturation. For this reason, this work presents the design of a state observer to estimate the cathode catalyst layer's liquid water saturation of an open-cathode PEM fuel cell. The proposed observer is based on High-Gain techniques, and is modified with a dynamic dead-zone which reduces the observer's noise sensibility. The results have been validated through numerical simulation and experiments. It is shown that, in the absence of noise, the proposed observer presents a similar performance than its non dead-zone equivalent. Moreover, in the presence of noise, the dead-zone significantly reduces the estimation error induced by it., [ES] En el campo de las pilas de combustible PEM, la gestión de agua líquida es una de las problemáticas más importantes que afectan a la eficiencia y vida útil del sistema. Las técnicas de control activo y supervisión del agua se ven limitadas por la ausencia de sensores que puedan medir la saturación de agua líquida en línea. Por eso, en este trabajo se presenta el diseño de un observador de estado para la estimación de la saturación de agua líquida en la capa catalizadora del cátodo de una pila de combustible PEM de cátodo abierto. El observador propuesto se basa en técnicas de alta ganancia. Además, se modifica con una función de zona muerta autoajustable con el fin de reducir su sensibilidad al ruido en la medida. Los resultados se han validado mediante simulación numérica y experimentación. Estos muestran que, en ausencia de ruido, el observador propuesto presenta unas prestaciones similares a las de su equivalente sin zona muerta. Además, en presencia de ruido, la zona muerta disminuye significativamente el error de estimación inducido por este., Este proyecto se ha financiado parcialmente por el proyecto DOVELAR (ref. RTI2018-096001-B-C32). Este trabajo se ha realizado con el apoyo de la Agencia Estatal de Investigación española a través del sello de excelencia de María de Maeztu, IRI (MDM-2016-0656). Este trabajo se ha financiado parcialmente por AGAUR of Generalitat de Catalunya a través de la subvención del grupo Advanced Control Systems (SAC) (2017 SGR 482). Este trabajo se ha realizado con el apoyo de ACCIÓ (Operational Program FEDER Catalunya 2014-2020) a través de REFER project (COMRDI15-1-0036-11).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Análisis y diseño de sistemas lineales con parámetros variantes utilizando LMIs, Analysis and design of linear parameter varying systems using LMIs

  • Rotondo, Damiano
  • Sánchez, Helem S.
  • Nejjari, Fatiha
  • Puig, Vicenç
[EN] This paper presents a tutorial on analysis and design of linear parameter varying (LPV) systems using linear matrix inequalities (LMIs). Several specifications, such as D-stability, guaranteed H∞ performance and guaranteed quadratic cost, as well as different control structures, such as state-feedback control, output-feedback control and observer-based control, are considered. A numerical example and a simplified model of a two-degrees-of-freedom helicopter (TRMS) are used to illustrate in a didactic manner the overall design methodology using LMIs., [ES] En este artículo se presenta un tutorial sobre análisis y diseño de sistemas lineales con parámetros variantes (LPV) utilizando las desigualdades lineales matriciales (LMIs). Varias especificaciones, tales como la D-estabilidad, el desempeño H∞ garantizado y el coste cuadrático garantizado, así como también diferentes estructuras de control, tales como el control por realimentación de estado, el control por realimentación de salida y el control basado en observador, han sido consideradas. Para ilustrar de forma didáctica el desarrollo completo del diseño mediante LMIs, se utilizan un ejemplo numérico y un modelo simplificado de un helicóptero de dos grados de libertad (TRMS)., Este trabajo ha sido realizado gracias al apoyo de la Agencia Estatal de Investigación (AEI) mediante el sello de excelencia científica María de Maetzu al IRI (ref. MDM-2016-0656),la ayuda Juan de la Cierva-Formación (ref. FJCI-2016-29019),y el apoyo de AEI y del Fondo Europeo de Desarrollo Regional (FEDER) a través de los proyectos DEOCS (ref. MINECO DPI2016-76493-C3-3-R) y SCAV (ref. MINECO DPI2017-88403-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Teaching, analyzing, designing and interactively simulating sliding mode control

  • Costa Castelló, Ramon
  • Carrero, Niliana
  • Dormido, Sebastián
  • Fossas-Colet, Enric
This paper introduces an interactive methodology to analize, design, and simulate sliding model controllers for R, linear systems. This paper reviews sliding mode basic concepts and design methodologies and describes an interactive tool which has been developed to support teaching in this field. The tool helps students by generating a nice graphical and interactive display of most relevant concepts. This fact can be used so that students build their own intuition about the role of different parameters in a sliding mode controller. Described application has been coded with Sysquake using an event-driven solver technique. The Sysquake allows using precise integration methods in real time and handling interactivity in a simple manner., This work was supported in part by the Spanish Ministry of Economy and Competitiveness (MINECO/FEDER) under Project DPI2012-31303 and Project DPI2015-69286-C3-2-R, in part by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI under Grant MDM-2016-0656, and in part by the AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) Group under Grant 2017 SGR 482., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Autonomous navigation of micro aerial vehicles using high-rate and low-cost sensors

  • Santamaria-Navarro, Àngel
  • Loianno, Giuseppe
  • Solà, Joan
  • Kumar, Vijay
  • Andrade-Cetto, Juan
The combination of visual and inertial sensors for state estimation has recently found wide echo in the robotics community, especially in the aerial robotics field, due to the lightweight and complementary characteristics of the sensors data. However, most state estimation systems based on visual-inertial sensing suffer from severe processor requirements, which in many cases make them impractical. In this paper, we propose a simple, low-cost and high rate method for state estimation enabling autonomous flight of micro aerial vehicles, which presents a low computational burden. The proposed state estimator fuses observations from an inertial measurement unit, an optical flow smart camera and a time-of-flight range sensor. The smart camera provides optical flow measurements up to a rate of 200 Hz, avoiding the computational bottleneck to the main processor produced by all image processing requirements. To the best of our knowledge, this is the first example of extending the use of these smart cameras from hovering-like motions to odometry estimation, producing estimates that are usable during flight times of several minutes. In order to validate and defend the simplest algorithmic solution, we investigate the performances of two Kalman filters, in the extended and error-state flavors, alongside with a large number of algorithm modifications defended in earlier literature on visual-inertial odometry, showing that their impact on filter performance is minimal. To close the control loop, a non-linear controller operating in the special Euclidean group SE(3) is able to drive, based on the estimated vehicle’s state, a quadrotor platform in 3D space guaranteeing the asymptotic stability of 3D position and heading. All the estimation and control tasks are solved on board and in real time on a limited computational unit. The proposed approach is validated through simulations and experimental results, which include comparisons with ground-truth data provided by a motion capture system. For the benefit of the community, we make the source code public., This work was funded by the project ROBINSTRUCT (TIN2014-58178-R) and the Ramón y Cajal posdoctoral fellowship (RYC-2012-11604) from the Spanish Ministry of Economy and Competitiveness, by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and by the EU H2020 project AEROARMS (H2020-ICT-2014-1-644271)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Economic model predictive control with nonlinear constraint relaxation for the operational management of water distribution networks

  • Wang, Ye
  • Alamo, Teodoro
  • Puig, Vicenç
  • Cembrano, Gabriela
This paper presents the application of an economic model predictive control (MPC) for the operational management of water distribution networks (WDNs) with periodic operation and nonlinear constraint relaxation. In addition to minimizing operational costs, the proposed approach aims to reduce the computational load and to improve the implementation efficiency associated with the nonlinear nature of the MPC problem. The behavior of the WDN is characterized by a set of difference-algebraic equations, where the relation of hydraulic pressure/head and flow in interconnected pipes is nonlinear. Specifically, the considered WDN model includes two categories of nonlinear algebraic equations for unidirectional and bidirectional flows in pipes, respectively. In this paper, we propose an iterative algorithm to relax these nonlinear algebraic equations into a set of linear inequality constraints that will be implemented in the economic MPC design, which improves the implementation efficiency and meanwhile optimizes the economic performance. Finally, the proposed strategy is applied to a well-known benchmark of the Richmond WDN. The closed-loop simulation results are shown and the proposed strategy is also compared with a nonlinear economic MPC using several key performance indexes., This work was partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project DEOCS (ref. DPI2016-76493), the María de Maeztu Seal of Excellence to IRI (ref. MDM-2016-0656) and the FPI grant (ref. BES-2014-068319), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Energy management strategy for a bioethanol isolated hybrid system: Simulations and experiments

  • Rullo, Pablo Gabriel
  • Costa Castelló, Ramon
  • Roda, Vicente
  • Feroldi, Diego
Renewable energy sources have significant advantages both from the environmental and the economic point of view. Additionally, renewable energy sources can contribute significantly to the development of isolated areas that currently have no connection to the electricity supply network. In order to make efficient use of these energy sources, it is necessary to develop appropriate energy management strategies. This work presents an energy management strategy for an isolated hybrid renewable energy system with hydrogen production from bioethanol reforming. The system is based on wind-solar energy, batteries and a bioethanol reformer, which produces hydrogen to feed a fuel cell system. Bioethanol can contribute to the development of isolated areas with surplus agricultural production, which can be used to produce bioethanol. The energy management strategy takes the form of a state machine and tries to maximize autonomy time while minimizing recharging time. The proposed rule-based strategy has been validated both by simulation and experimentally in a scale laboratory station. Both tests have shown the viability of the proposed strategy complying with the specifications imposed and a good agreement between experimental and simulation results, This work has been partially funded by the Spanish national project MICAPEM(Ref. DPI2015-69286-C3-2-R, MINECO/FEDER) and the Argentine national project PICT2014-1607. This work is supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAURof Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Force-based representation for non-rigid Shape and elastic model estimation

  • Agudo Martínez, Antonio
  • Moreno-Noguer, Francesc
This paper addresses the problem of simultaneously recovering 3D shape, pose and the elastic model of a deformable object from only 2D point tracks in a monocular video. This is a severely under-constrained problem that has been typically addressed by enforcing the shape or the point trajectories to lie on low-rank dimensional spaces. We show that formulating the problem in terms of a low-rank force space that induces the deformation and introducing the elastic model as an additional unknown, allows for a better physical interpretation of the resulting priors and a more accurate representation of the actual object's behavior. In order to simultaneously estimate force, pose, and the elastic model of the object we use an expectation maximization strategy, where each of these parameters are successively learned by partial M-steps. Once the elastic model is learned, it can be transfered to similar objects to code its 3D deformation. Moreover, our approach can robustly deal with missing data, and encode both rigid and non-rigid points under the same formalism. We thoroughly validate the approach on Mocap and real sequences, showing more accurate 3D reconstructions than state-of-the-art, and additionally providing an estimate of the full elastic model with no a priori information., This work has been partially supported by the Spanish Ministry of Science and Innovation under project RobInstruct TIN2014-58178-R; and by a Google Faculty Award. This work is also supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI MDM-2016-0656., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A shifting pole placement approach for the design of performance-varying multivariable PID controllers via BMIs

  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Puig, Vicenç
  • Quevedo, Joseba
In this paper, the design of a performance-varying multivariable Proportional-Integral-Derivative (PID) controllers is presented. The main objective is to provide a framework for changing online the closed-loop behavior of the controlled system using the shifting pole placement approach. In order to carry out this target, the PID design problem is transformed into a static output feedback design problem which is analyzed through the linear parameter-varying (LPV) paradigm. An academic example is used to demonstrate the effectiveness of the proposed approach., This work has been partly funded by MINECO and FEDER through the project CICYT HARCRICS (ref.DPI2014-58104-R) and SCAV (ref.DPI2017-88403-R). This work has been also supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formación (FJCI-2016-2901)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A two-tank benchmark for detection and isolation of cyber attacks

  • Quevedo, Joseba
  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Escobet, Teresa
  • Puig, Vicenç
This paper presents a benchmark for the detection and isolation of cyber attacks, which is a non-linear controlled interconnected system based on a two tank system. In this benchmark, a malicious attacker wants to remain hidden while stealing water by altering the signals of the sensors of the levels of the tanks. It is assumed that the attacker can steal water from the tanks using extraction pumps with pre-established flow rates and, depending on the theft and the type of sensor alteration, different attack scenarios are proposed., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R), by AGAUR of the Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the Agència de Gestió d’Ajuts Universitaris i de Recerca. This work has been also supported by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva -Formacion (FJCI-2016-29019), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Composite PID control with unknown dynamics estimator for rotomagnet plant

  • Xing, Yashan
  • Na, Jing
  • Costa Castelló, Ramon
Although PID control has been widely used in practical engineering, its ability to reject external disturbance and to handle severe nonlinearities should be further enhanced. In this paper, we present a simple robust unknown dynamics estimation, which can be easily incorporated into PID control to achieve satisfactory control performance for a rotomagnet plant subject to period disturbance. The use of this estimator together with PID control leads to a feedforward like composite control framework. Unlike other estimators, only low-pass filter operations on the input and output and simple algebraic operations are needed to construct our estimator, while exponential convergence can be guaranteed. Numerical simulations are given to show the validity of the proposed estimator and composite PID control., This work was supported by the National Natural Science Foundation of China (NSFC) under grant 61573174 and the spanish Ministerio de Educacion project DPI2015- 69286-C3-2-R (MINECO/FEDER). This work is supported by the Spanish State Research Agency through the Marıa de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Frequency-based detection of replay attacks: application to a multiple tank system

  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Escobet, Teresa
  • Puig, Vicenç
  • Quevedo, Joseba
This paper presents a frequency-based method for detecting replay attacks and its application to a multiple tank system. This method introduces a sinusoidal signal with a time-varying frequency (authentication signature) into the closed-loop system and checks whether the output signal is compatible with the signature or not. The effectiveness of the method is illustrated through simulation scenarios using a 9-tank system under different situations., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R), by AGAUR of the Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the Agènda de Gestió d’Ajuts Universitaris i de Recerca. This work has been also supported by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva -Formacion (FJCI-2016-29019)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Grid voltage regulation using a reset PI+CI controller for energy storage systems

  • Nair, Unnikrishnan Raveendran
  • Costa Castelló, Ramon
  • Baños, Alfonso
Hybrid controllers are capable of improved performance over their linear counterparts. In particular, reset controllers like the PI+CI are capable of fast flat response for lag dominant plants. Grid connected power converters especially interfacing energy storage systems to grids are required to have fast response to varying load demands to ensure minimum variation in grid parameters. Application of PI+CI controllers in such systems can improve their performance. In this work the improvement brought about by use of PI+CI controller employed for energy storage system power converters is highlighted by comparing it with PI controller based system under load variations. A DC microgrid with Fuel cell-supercapacitor based storage elements are considered here. The design criteria and simulation results are presented here., This work was partially supported, including FEDER co-funding, by the Spanish Ministerio de Educacin project DPI2015-69286-C3-2-R (MINECO/FEDER), project DPI2013-47100-C2-1-P, and project DPI2016- 79278-C2-1-R. This work is supported by the Spanish State Research Agency through the Mara de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The use of interactivity in the controller design: Loop shaping versus closed-loop shaping

  • Díaz, José Manuel
  • Dormido, Sebastián
  • Costa Castelló, Ramon
Frequency domain is one of the most popular and powerful framework to design control system. Usually this procedure is done using the open-loop transfer function. In this work, it is explored the possibility to perform the controller design by closed-loop shaping. It is analyzed how graphical representation and interactivity can be used in this framework to help automatic control students during the learning process., This work was supported by Spanish Ministry of Economy and Competitiveness under projects DPI2012-31303 and DPI2015-69286-C3-2-R (MINECO/FEDER). This work is supported by the Spanish State Research Agency through the Mar´ıa de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Deciding the different robot roles for patient cognitive training

  • Andriella, Antonio
  • Alenyà, Guillem
  • Hernández-Farigola, Joan
  • Torras, Carme
Alzheimer’s Disease (AD) and Mild Cognitive Impairment (MCI) represent a major challenge for health systems within the aging population. New and better instruments will be crucial to assess the disease severity and progression, as well as to improve its treatment, stimulation, and rehabilitation. With the purpose of detecting, assessing and quantifying cognitive impairments like MCI or AD, several methods are employed by clinical experts. Syndrom Kurztest neuropsychological battery (SKT) is a simple and short test to measure cognitive decline as it assesses memory, attention, and related cognitive functions, taking into account the speed of information processing. In this paper, we present a decision system to embed in a robot that can set up a productive interaction with a patient, and can be employed by the caregiver to motivate and support him while performing cognitive exercises as SKT. We propose two different interaction loops. First, the robot interacts with the caregiver in order to set up the mental and physical impairments of the patient and indicate a goal of the exercise. This is used to determine the desired robot behavior (human-centric or robot-centric, and preferred interaction modalities). Second, the robot interacts with the patient and adapts its actions to engage and assist him to complete the exercise. Two batches of experiments were conducted, and the results indicated that the robot can take profit of the initial interaction with the caregiver to provide a quicker personalization, and also it can adapt to different user responses and provide support and assistance at different levels of interaction., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie SkłodowskaCurie grant agreement No. 721619 by the Spanish Ministry of Science and Innovation under project HuMoUR TIN2017-90086 and by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mathematical modeling, numerical simulation and experimental comparison of the desorption process in a metal hydride hydrogen storage system

  • Busqué Somacarrera, Raquel
  • Torres, Ricardo
  • Grau, Joan
  • Roda, Vicente
  • Husar, Attila
A two-dimensional axisymmetric model is developed to study the hydrogen desorption reaction and its subsequent discharge in a metal hydride canister. Experimental tests are performed on an in-house fabricated setup. An extensive study on the effects of the metal properties and boundary conditions on discharging performance is carried out through non-destructive testing (NDT). Results show that the desorption process is more effective if the activation energy for desorption (Ed) and the reaction enthalpy (ΔH) decrease, and when the desorption rate coefficient (Cd) and the external convection heat transfer coefficient when the bottle is being heated (h) increase. Furthermore, porosity (ε) can be useful for the design of hydrogen storage systems, with a trade-off between charge/discharge time and storage capacity. Numerical and experimental results are compared achieving a good agreement. These results can be used to select metal hydride materials and also for the future evaluation of metal hydride degradation., This work has been partially funded by the Spanish national project MICAPEM (ref. DPI2015-69286-C3-2-R, MINECO/FEDER) and the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI MDM-2016-0656., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Actuator fault tolerance evaluation approach of nonlinear model predictive control systems using viability theory

  • Zarch, Majid Ghaniee
  • Puig, Vicenç
  • Poshtan, Javad
  • Shoorehdeli, Mahdi Aliyari
In this paper, an approach to evaluate the actuator fault tolerance of a nonlinear model predictive control (NMPC) system using viability theory is proposed. Viability theory provides several concepts formulated in a set form (viability kernel and capture basin) that are very useful to assess if after the fault the NMPC controller will be able to achieve their goal either using a reconfiguration or an accommodation strategy. By representing the nonlinear model of the system in a linear parameter varying (LPV) form and using zonotopes to evaluate viability sets, an algorithm is developed and implemented that is able to assess the tolerance of the NMPC controller. To illustrate the proposed approach two application examples based on well-known control problems (a pasteurization plant and a mobile robot) are used., This work has been funded by the Spanish Ministry of Economy and Competitiveness (MINECO) and FEDER through the projects ECOCIS (Ref. DPDEOCS (ref. DPI2016-76493) and SCAV (ref. DPI2017-88403-R), the FPI grant (ref. BES-2014-068319), the María de Maeztu Seal of Excellence to IRI (ref. MDM-2016-0656), and by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (ref. 2017-SGR-482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust and Real-Time Detection and Tracking of Moving Objects with Minimum 2D LiDAR Information to Advance Autonomous Cargo Handling in Ports

  • Vaquero, Victor
  • Repiso, Ely
  • Sanfeliu, Alberto
Detecting and tracking moving objects (DATMO) is an essential component for autonomous driving and transportation. In this paper, we present a computationally low-cost and robust DATMO system which uses as input only 2D laser rangefinder (LRF) information. Due to its low requirements both in sensor needs and computation, our DATMO algorithm is meant to be used in current Autonomous Guided Vehicles (AGVs) to improve their reliability for the cargo transportation tasks at port terminals, advancing towards the next generation of fully autonomous transportation vehicles. Our method follows a Detection plus Tracking paradigm. In the detection step we exploit the minimum information of 2D-LRFs by segmenting the elements of the scene in a model-free way and performing a fast object matching to pair segmented elements from two different scans. In this way, we easily recognize dynamic objects and thus reduce consistently by between two and five times the computational burden of the adjacent tracking method. We track the final dynamic objects with an improved Multiple-Hypothesis Tracking (MHT), to which special functions for filtering, confirming, holding, and deleting targets have been included. The full system is evaluated in simulated and real scenarios producing solid results. Specifically, a simulated port environment has been developed to gather realistic data of common autonomous transportation situations such as observing an intersection, joining vehicle platoons, and perceiving overtaking maneuvers. We use different sensor configurations to demonstrate the robustness and adaptability of our approach. We additionally evaluate our system with real data collected in a port terminal the Netherlands. We show that it is able to accomplish the vehicle following task successfully, obtaining a total system recall of more than 98% while running faster than 30 Hz, This work has been partly funded by the EU project CargoANTs FP7-SST-2013-605598, the Spanish MINECO projects DPI2016-78957-R (AEI/FEDER EU) and Unidad de Excelencia Maria de Maeztu 2016 (MDM-2016-0656)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Active SLAM for autonomous underwater exploration

  • Palomeras, Narcís
  • Carreras, Marc
  • Andrade-Cetto, Juan
Exploration of a complex underwater environment without an a priori map is beyond the state of the art for autonomous underwater vehicles (AUVs). Despite several efforts regarding simultaneous localization and mapping (SLAM) and view planning, there is no exploration framework, tailored to underwater vehicles, that faces exploration combining mapping, active localization, and view planning in a unified way. We propose an exploration framework, based on an active SLAM strategy, that combines three main elements: a view planner, an iterative closest point algorithm (ICP)-based pose-graph SLAM algorithm, and an action selection mechanism that makes use of the joint map and state entropy reduction. To demonstrate the benefits of the active SLAM strategy, several tests were conducted with the Girona 500 AUV, both in simulation and in the real world. The article shows how the proposed framework makes it possible to plan exploratory trajectories that keep the vehicle's uncertainty bounded; thus, creating more consistent maps., This research was funded by the Spanish State Research Agency through grants DPI2015-73978-JIN and DPI2017-89564-P, and the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adapting robot task planning to user preferences: an assistive shoe dressing example

  • Canal, Gerard
  • Alenyà, Guillem
  • Torras, Carme
Healthcare robots will be the next big advance in humans’ domestic welfare, with robots able to assist elderly people and users with disabilities. However, each user has his/her own preferences, needs and abilities. Therefore, robotic assistants will need to adapt to them, behaving accordingly. Towards this goal, we propose a method to perform behavior adaptation to the user preferences, using symbolic task planning. A user model is built from the user’s answers to simple questions with a fuzzy inference system, and it is then integrated into the planning domain. We describe an adaptation method based on both the user satisfaction and the execution outcome, depending on which penalizations are applied to the planner’s rules. We demonstrate the application of the adaptation method in a simple shoe-fitting scenario, with experiments performed in a simulated user environment. The results show quick behavior adaptation, even when the user behavior changes, as well as robustness to wrong inference of the initial user model. Finally, some insights in a non-simulated world shoe-fitting setup are also provided., This work has been partially supported by the CHIST-ERA Project I-DRESS PCIN-2015-147, by the Spanish Ministry of Science and Innovation HuMoUR TIN2017-90086-R and the AEI through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). Gerard Canal is also supported by the Spanish Ministry of Education, Culture and Sport via a doctoral grant FPU15/00504.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adaptive Side-by-Side Social Robot Navigation to Approach and Interact with People

  • Repiso, Ely
  • Garrell, Anaís
  • Sanfeliu, Alberto
This paper presents a new framework for how autonomous social robots approach and accompany people in urban environments. The method discussed allows the robot to accompany a person and approach to other one, by adapting its own navigation in anticipation of future interactions with other people or contact with static obstacles. The contributions of the paper are manifold: firstly, we extended the Social Force model and the Anticipative Kinodynamic Planner (Ferrer and Sanfeliu, in: IEEE/RSJ international conference on intelligent robots and systems. IEEE, 2014) to the case of an adaptive side-by-side navigation; secondly, we enhance side-by-side navigation with an approaching task and a final positioning that allows the robot to interact with both people; and finally, we use findings from experiments of real-life observations of people walking in pairs to define the parameters of the human–robot interaction in our case of adaptive side-by-side. The method was validated by a large set of simulations; we also conducted real-life experiments with our robot, Tibi, to validate the framework described for the interaction process. In addition, we carried out various surveys and user studies to indicate the social acceptability of the robots performance of the accompanying, approaching and positioning tasks., Work supported by the Spanish Ministry of Science and Innovation under project ColRobTransp (DPI2016-78957-R. AEI/FEDER EU), by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and EU TERRINET project (H2020-INFRAIA-2017-1-two-stage-730994). Ely Repiso is also supported by Spanish Ministry of Science and Innovation under a FPI-grant (BES-2014-067713)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Análisis y Diseño de Sistemas Lineales con Parámetros Variantes Utilizando LMIs, Analysis and design of linear parameter varying systems using LMIs

  • Rotondo, Damiano
  • Sánchez, Helem Sabina
  • Nejjari, Fatiha
  • Puig, Vicenç
[ES] En este articulo se presenta un tutorial sobre análisis y diseño de sistemas lineales con parámetros variantes (LPV) utilizando las desigualdades lineales matriciales (LMIs). Varias especificaciones, tales como la D-estabilidad, el desempeño H1 garantizado y el coste cuadrático garantizado, as´ı como tambi´en diferentes estructuras de control, tales como el control por realimentacion de estado, el control por realimentacion de salida y el control basado en observador, han sido consideradas. Para ilustrar de forma didáctica el desarrollo completo del diseño mediante LMIs, se utilizan un ejemplo numérico y un modelo simplificado de un helicóptero de dos grados de libertad (TRMS)., [EN] This paper presents a tutorial on analysis and design of linear parameter varying (LPV) systems using linear matrix inequalities (LMIs). Several specifications, such as D-stability, guaranteed H1 performance and guaranteed quadratic cost, as well as dierent control structures, such as state-feedback control, output-feedback control and observer-based control, are considered. A numerical example and a simplified model of a two-degrees-of-freedom helicopter (TRMS) are used to illustrate in a didactic manner the overall design methodology using LMIs., Este trabajo ha sido realizado gracias al apoyo de la Agencia Estatal de Investigacion (AEI) mediante el sello de excelencia cientıfica Marıa de Maetzu al IRI (ref. MDM-2016-0656), la ayuda Juan de la Cierva-Formación (ref. FJCI-2016-29019), y el apoyo de AEI y del Fondo Europeo de Desarrollo Regional (FEDER) a través de los proyectos DEOCS (ref. MINECO DPI2016-76493-C3-3-R) y SCAV (ref. MINECO DPI2017-88403-R)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An optimization-based control strategy for energy efficiency of discrete manufacturing systems

  • Diaz C., Jenny L.
  • Bermeo-Ayerbe, Miguel Ángel
  • Diaz-Rozo, Javier
  • Ocampo-Martínez, Carlos
In order to reduce the global energy consumption and avoid highest power peaks during operation of manufacturing systems, an optimization-based controller for selective switching on/off of peripheral devices in a test bench that emulates the energy consumption of a periodic system is proposed. First, energy consumption models for the test-bench devices are obtained based on data and subspace identification methods. Next, a control strategy is designed based on both optimization and receding horizon approach, considering the energy consumption models, operating constraints, and the real processes performed by peripheral devices. Thus, a control policy based on dynamical models of peripheral devices is proposed to reduce the energy consumption of the manufacturing systems without sacrificing the productivity. Afterward, the proposed strategy is validated in the test bench and comparing to a typical rule-based control scheme commonly used for these manufacturing systems. Based on the obtained results, reductions near 7% could be achieved allowing improvements in energy efficiency via minimization of the energy costs related to nominal power purchased., This work has been funded by the project IKERCON (ref. C10683) and partially supported by the Spanish State Research Agency, Spain through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). Jenny Díaz has been supported by FI-AGAUR scholarship programme of the Catalan Government, Spain .
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anticipatory kinodynamic motion planner for computing the best path and velocity trajectory in autonomous driving

  • Pérez Talamino, Jordi
  • Sanfeliu, Alberto
This paper presents an approach, using an anticipatory kinodynamic motion planner, for obtaining the best trajectory and velocity profile for autonomous driving in dynamic complex environments, such as driving in urban scenarios. The planner discretizes the road search space and looks for the best vehicle path and velocity profile at each control period of time, assuming that the static and dynamic objects have been detected. The main contributions of the work are in the anticipatory kinodynamic motion planner, in a fast method for obtaining the G-splines for path generation, and in a method to compute and select the best velocity profile at each candidate path that fulfills the vehicle kinodynamic constraints, taking into account the passenger comfort. The method has been developed and tested in MATLAB through a set of simulations in different representative scenarios, involving fixed obstacles and moving vehicles. The outcome of the simulations shows that the anticipatory kinodynamic planner performs correctly in diverse dynamic scenarios, maintaining smooth accelerations for passenger comfort., Work supported by the Spanish Ministry of Science and Innovation under project ColRobTransp (DPI2016-78957-RAEI/FEDER EU) and by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessment of Energy Management in a Fuel Cell/Battery Hybrid Vehicle

  • Carignano, Mauro G.
  • Roda, Vicente
  • Costa Castelló, Ramon
  • Valiño García, Luis
  • Lozano Fantoba, Antonio
  • Barreras Toledo, Félix
The energy management strategy plays a major role in hybrid platforms powered by fuel cells (FCs) and batteries. This paper presents an assessment of energy management focused on fuel economy and battery degradation. Particularly, a proposed heuristic strategy and the widely known equivalent consumption minimization strategy are compared with the optimal solution obtained offline via dynamic programming. The case study is based on a real FC hybrid vehicle. Accordingly, the powertrain model of the vehicle used for the simulations is validated experimentally, and the profile of the power demand is measured from the real application. The results show that the proposed strategy offers the same performance as the equivalent consumption minimization strategy when the battery degradation is prioritized, and in comparison with the optimal off-line solution, it can be seen that there is still margin for improvement in terms of battery degradation., This work was supported in part by the Scholarship Program BECAR of Ministerio de Modernizacion of Argentina, under Project DPI2015-69286-C3-1-R and Project DPI2015-69286-C3-2-R (MINECO/FEDER) of the Spanish Government, in part by the European Commission H2020 through the Fuel Cell and Hydrogen Joint Undertaking Project under Project INN-BALANCE 735969 and Project REWIND LIFE13 ENV/ES/000280, in part by the Regional Government of Aragon to the Fluid Mechanics for a Clean Energy Research Group of LIFTEC under Grant T01_17R, in part by the Spanish State Research Agency through the Marí de Maeztu Seal of Excellence to IRI under Grant MDM-2016-0656, and in part by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) Group under Grant 2017 SGR 482.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A survey on the computation of quaternions from rotation matrices

  • Sarabandi, Soheil
  • Thomas, Federico
The parameterization of rotations is a central topic in many theoretical and applied fields such as rigid body mechanics, multibody dynamics, robotics, spacecraft attitude dynamics, navigation, three-dimensional image processing, and computer graphics. Nowadays, the main alternative to the use of rotation matrices, to represent rotations in ℝ 3, is the use of Euler parameters arranged in quaternion form. Whereas the passage from a set of Euler parameters to the corresponding rotation matrix is unique and straightforward, the passage from a rotation matrix to its corresponding Euler parameters has been revealed to be somewhat tricky if numerical aspects are considered. Since the map from quaternions to 3 × 3 rotation matrices is a 2-to-1 covering map, this map cannot be smoothly inverted. As a consequence, it is erroneously assumed that all inversions should necessarily contain singularities that arise in the form of quotients where the divisor can be arbitrarily small. This misconception is herein clarified. This paper reviews the most representative methods available in the literature, including a comparative analysis of their computational costs and error performances. The presented analysis leads to the conclusion that Cayley's factorization, a little-known method used to compute the double quaternion representation of rotations in four dimensions from 4 × 4 rotation matrices, is the most robust method when particularized to three dimensions., This work has been partially supported by the Spanish Ministry of Economy and Competitiveness through projects DPI2014-57220-C2-2-P, DPI2017-88282- P, and MDM-2016-0656.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A virtual actuator approach for the secure control of networked LPV systems under pulse-width modulated DoS attacks

  • Rotondo, Damiano
  • Sánchez, Helem Sabina
  • Puig, Vicenç
  • Escobet, Teresa
  • Quevedo, Joseba
In this paper, we formulate and analyze the problem of secure control in the context of networked linear parameter varying (LPV) systems. We consider an energy-constrained, pulse-width modulated (PWM) jammer, which corrupts the control communication channel by performing a denial-of-service (DoS) attack. In particular, the malicious attacker is able to erase the data sent to one or more actuators. In order to achieve secure control, we propose a virtual actuator technique under the assumption that the behavior of the attacker has been identified. The main advantage brought by this technique is that the existing components in the control system can be maintained without need of retuning them, since the virtual actuator will perform a reconfiguration of the plant, hiding the attack from the controller point of view. Using Lyapunov-based results that take into account the possible behavior of the attacker, design conditions for calculating the virtual actuators gains are obtained. A numerical example is used to illustrate the proposed secure control strategy., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493). This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016- 0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bibliographical review on cyber attacks from a control oriented perspective

  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Escobet, Teresa
  • Puig, Vicenç
  • Quevedo, Joseba
This paper presents a bibliographical review of definitions, classifications and applications concerning cyber attacks in networked control systems (NCSs) and cyber-physical systems (CPSs). This review tackles the topic from a control-oriented perspective, which is complementary to information or communication ones. After motivating the importance of developing new methods for attack detection and secure control, this review presents security objectives, attack modeling, and a characterization of considered attacks and threats presenting the detection mechanisms and remedial actions. In order to show the properties of each attack, as well as to provide some deeper insight into possible defense mechanisms, examples available in the literature are discussed. Finally, open research issues and paths are presented., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493), and also by AGAUR ACCIO RIS3CAT UTILITIES 4.0 P7 SECUTIL. This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design of state-feedback controllers for linear parameter varying systems subject to time-varying input saturation

  • Ruiz Royo, Adrián
  • Rotondo, Damiano
  • Morcego, Bernardo
All real-world systems are affected by the saturation phenomenon due to inherent physical limitations of actuators. These limitations should be taken into account in the controller's design to prevent a possibly severe deterioration of the system's performance, and may even lead to instability of the closed-loop system. Contrarily to most of the control strategies, which assume that the saturation limits are constant in time, this paper considers the problem of designing a state-feedback controller for a system affected by time-varying saturation limits with the objective to improve the performance. In order to tie variations of the saturation function to changes in the performance of the closed-loop system, the shifting paradigm is used, that is, some parameters scheduled by the time-varying saturations are introduced to schedule the performance criterion, which is considered to be the instantaneous guaranteed decay rate. The design conditions are obtained within the framework of linear parameter varying (LPV) systems using quadratic Lyapunov functions with constant Lyapunov matrices and they consist in a linear matrix inequality (LMI)-based feasibility problem, which can be solved efficiently using available solvers. Simulation results obtained using an illustrative example demonstrate the validity and the main characteristics of the proposed approach., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project SCAV (ref. MINECO DPI2017-88403-R). This work has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656). Adrián Ruiz is also supported by Formació Personal Investigador a la Universitat Politècnica de Catalunya under an FPI-UPC 2018 grant (ref. 20 FPI-UPC 2018). Damiano Rotondo is also supported by Juan de la Cierva - Formacion grant (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Detection of replay attacks in cyber-physical systems using a frequency-based signature

  • Sánchez, Helem Sabina
  • Rotondo, Damiano
  • Escobet, Teresa
  • Puig, Vicenç
  • Saludes, Jordi
  • Quevedo, Joseba
This paper proposes a frequency-based approach for the detection of replay attacks affecting cyber-physical systems (CPS). In particular, the method employs a sinusoidal signal with a time-varying frequency (authentication signal) into the closed-loop system and checks whether the time profile of the frequency components in the output signal are compatible with the authentication signal or not. In order to carry out this target, the couplings between inputs and outputs are eliminated using a dynamic decoupling technique based on vector fitting. In this way, a signature introduced on a specific input channel will affect only the output that is selected to be associated with that input, which is a property that can be exploited to determine which channels are being affected. A bank of band-pass filters is used to generate signals whose energies can be compared to reconstruct an estimation of the time-varying frequency profile. By matching the known frequency profile with its estimation, the detector can provide the information about whether a replay attack is being carried out or not. The design of the signal generator and the detector are thoroughly discussed, and an example based on a quadruple-tank process is used to show the application and effectiveness of the proposed method., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R), by AGAUR of the Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Economic health-aware LPV-MPC based on system reliability assessment for water transport network

  • Karimi Pour, Fatemeh
  • Puig, Vicenç
  • Cembrano, Gabriela
This paper proposes a health-aware control approach for drinking water transport networks. This approach is based on an economic model predictive control (MPC) that considers an additional goal with the aim of extending the components and system reliability. The components and system reliability are incorporated into the MPC model using a Linear Parameter Varying (LPV) modeling approach. The MPC controller uses additionally an economic objective function that determines the optimal filling/emptying sequence of the tanks considering that electricity price varies between day and night and that the demand also follows a 24-h repetitive pattern. The proposed LPV-MPC control approach allows considering the model nonlinearities by embedding them in the parameters. The values of these varying parameters are updated at each iteration taking into account the new values of the scheduling variables. In this way, the optimization problem associated with the MPC problem is solved by means of Quadratic Programming (QP) to avoid the use of nonlinear programming. This iterative approach reduces the computational load compared to the solution of a nonlinear optimization problem. A case study based on the Barcelona water transport network is used for assessing the proposed approach performance., This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493). This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploiting symmetries in reinforcement learning of bimanual robotic tasks

  • Amadio, Fabio
  • Colomé, Adrià
  • Torras, Carme
Movement primitives (MPs) have been widely adopted for representing and learning robotic movements using reinforcement learning policy search. Probabilistic movement primitives (ProMPs) are a kind of MP based on a stochastic representation over sets of trajectories, able to capture the variability allowed while executing a movement. This approach has proved effective in learning a wide range of robotic movements, but it comes with the necessity of dealing with a high-dimensional space of parameters. This may be a critical problem when learning tasks with two robotic manipulators, and this work proposes an approach to reduce the dimension of the parameter space based on the exploitation of symmetry. A symmetrization method for ProMPs is presented and used to represent two movements, employing a single ProMP for the first arm and a symmetry surface that maps that ProMP to the second arm. This symmetric representation is then adopted in reinforcement learning of bimanual tasks (from user-provided demonstrations), using relative entropy policy search algorithm. The symmetry-based approach developed has been tested in an experiment of cloth manipulation, showing a speed increment in learning the task., This work was partially developed in the context of the project CLOTHILDE (>CLOTH manIpulation Learning from DEmonstrations>), which has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Advanced Grant agreement No 741930). This work is supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

GANimation: One-Shot Anatomically Consistent Facial Animation

  • Pumarola, Albert
  • Agudo Martínez, Antonio
  • Martínez, Aleix M.
  • Sanfeliu, Alberto
  • Moreno-Noguer, Francesc
Recent advances in generative adversarial networks (GANs) have shown impressive results for the task of facial expression synthesis. The most successful architecture is StarGAN (Choi et al. in CVPR, 2018), that conditions GANs’ generation process with images of a specific domain, namely a set of images of people sharing the same expression. While effective, this approach can only generate a discrete number of expressions, determined by the content and granularity of the dataset. To address this limitation, in this paper, we introduce a novel GAN conditioning scheme based on action units (AU) annotations, which describes in a continuous manifold the anatomical facial movements defining a human expression. Our approach allows controlling the magnitude of activation of each AU and combining several of them. Additionally, we propose a weakly supervised strategy to train the model, that only requires images annotated with their activated AUs, and exploit a novel self-learned attention mechanism that makes our network robust to changing backgrounds, lighting conditions and occlusions. Extensive evaluation shows that our approach goes beyond competing conditional generators both in the capability to synthesize a much wider range of expressions ruled by anatomically feasible muscle movements, as in the capacity of dealing with images in the wild. The code of this work is publicly available at https://github.com/albertpumarola/GANimation., This work is partially supported by an Amazon Research Award, by the Spanish Ministry of Economy and Competitiveness under Projects HuMoUR TIN2017-90086-R, ColRobTransp DPI2016-78957 and María de Maeztu Seal of Excellence MDM-2016-0656; by the EU Project AEROARMS ICT-2014-1-644271; and by the Grant R01-DC- 014498 of the National Institute of Health. We also thank Nvidia for hardware donation under the GPU Grant Program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interval observer versus set-membership approaches for fault detection in uncertain systems using zonotopes

  • Pourasghar, Masoud
  • Puig, Vicenç
  • Ocampo-Martínez, Carlos
This paper presents both analysis and comparison of the interval observer–based and set-membership approaches for the state estimation and fault detection (FD) in uncertain linear systems. The considered approaches assume that both state disturbance and measurement noise are modeled in a deterministic context following the unknown but bounded approach. The propagation of uncertainty in the state estimation is bounded through a zonotopic set representation. Both approaches have been mathematically related and compared when used for state estimation and FD. A case study based on a two-tanks system is employed for showing the relationship between both approaches while comparing their performance., Spanish State Research Agency (AEI)through the María de Maeztu Seal ofExcellence to IRI, Grant/Award Number:MDM-2016-0656; European RegionalDevelopment Fund (ERFD); DEOCS,Grant/Award Number: MINECO DPI2016-76493; SCAV, Grant/AwardNumber: MINECO DPI2017-88403-R;AGAUR of Generalitat de Catalunyathrough the Advanced Control Systems(SAC) group, Grant/Award Number: 2017SGR 482; Agència de Gestió d'AjutsUniversitaris i de Recerca
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On Cayley’s Factorization with an Application to the Orthonormalization of Noisy Rotation Matrices

  • Sarabandi, Soheil
  • Perez-Gracia, Alba
  • Thomas, Federico
A real orthogonal matrix representing a rotation in four dimensions can be decomposed into the commutative product of a left- and a right-isoclinic rotation matrix. This operation, known as Cayley’s factorization, directly provides the double quaternion representation of rotations in four dimensions. This factorization can be performed without divisions, thus avoiding the common numerical issues attributed to the computation of quaternions from rotation matrices. In this paper, it is shown how this result is particularly useful, when particularized to three dimensions, to re-orthonormalize a noisy rotation matrix by converting it to quaternion form and then obtaining back the corresponding proper rotation matrix. This re-orthonormalization method is commonly implemented using the Shepperd–Markley method, but the method derived here is shown to outperform it by returning results closer to those obtained using the singular value decomposition which are known to be optimal in terms of the Frobenius norm., Fuding was provided by Ministerio de Economía y Competitividad (Grant no. DPI2017-88282-P), Ministerio de Economía y Competitividad (Grant no. MDM-2016-0656) and National Science Foundation (Grant no. 1208385).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On inferring intentions in shared tasks for industrial collaborative robots

  • Olivares-Alarcos, Alberto
  • Foix, Sergi
  • Alenyà, Guillem
Inferring human operators’ actions in shared collaborative tasks plays a crucial role in enhancing the cognitive capabilities of industrial robots. In all these incipient collaborative robotic applications, humans and robots not only should share space, but also forces and the execution of a task. In this article, we present a robotic system that is able to identify different human’s intentions and to adapt its behavior consequently, only employing force data. In order to accomplish this aim, three major contributions are presented: (a) a force based operator’s intention recognition system based on data from only two users; (b) a force based dataset of physical human–robot interaction; and (c) validation of the whole system with 15 people in a scenario inspired by a realistic industrial application. This work is an important step towards a more natural and user-friendly manner of physical human–robot interaction in scenarios where humans and robots collaborate in the accomplishment of a task., This work is supported by the Regional Catalan Agency ACCIÓthrough the RIS3CAT2016 project SIMBIOTS(COMRDI16-1-0017) and the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (Institut de Robòtica i Informàtica Industrial)(MDM-2016-0656) and the HuMoUR project TIN2017-90086-R (AEI/FEDER, UE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimal sizing of storage elements for a vehicle based on fuel cells, supercapacitors, and batteries

  • Sampietro, José Luis
  • Puig, Vicenç
  • Costa Castelló, Ramon
To achieve a vehicle-efficient energy management system, an architecture composed of a PEM fuel cell as the main energy source and a hybrid storage system based on battery banks and supercapacitors is proposed. This paper introduces a methodology for the optimal component sizing aiming at minimizing the total cost, achieving a cheaper system that can achieve the requirements of the speed profiles. The chosen vehicle is an urban transport bus, which must meet the Buenos Aires Driving Cycle, and the Manhattan Driving Cycle. The combination of batteries and supercapacitors allows a better response to the vehicle’s power demand, since it combines the high energy density of the batteries with the high power density of the supercapacitors, allowing the best absorption of energy coming from braking. In this way, we address the rapid changes in power without reducing the global efficiency of the system. Optimum use of storage systems and fuel cell is analyzed through dynamic programming., This work has been partially funded by the Spanish national projects MICAPEM (ref. DPI2015-69286-C3-2-R, MINECO/FEDER) and SCAV (ref. DPI2017-88403-R MINECO/FEDER). This work is supported by the Spanish State Research Agencythrough the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimal state observation using quadratic boundedness: Application to UAV disturbance estimation

  • Cayero, Julián
  • Rotondo, Damiano
  • Morcego, Bernardo
  • Puig, Vicenç
This paper presents the design of a state observer which guarantees quadratic boundedness of the estimation error. By using quadratic Lyapunov stability analysis, the convergence rate and the ultimate (steady-state) error bounding ellipsoid are identified as the parameters that define the behaviour of the estimation. Then, it is shown that these objectives can be merged in a scalarised objective function with one design parameter, making the design problem convex. In the second part of the article, a UAV model is presented which can be made linear by considering a particular state and frame of reference. The UAV model is extended to incorporate a disturbance model of variable size. The joint model matches the structure required to derive an observer, following the lines of the proposed design approach. An observer for disturbances acting on the UAV is derived and the analysis of the performances with respect to the design parameters is presented. The effectiveness and main characteristics of the proposed approach are shown using simulation results., This work has been partially funded by the Spanish Government and FEDER through the projects CICYT DEOCS and SCAV (refs. MINECO DPI2016-76493, DPI2017-88403-R). It has also been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482), and by AGAUR and the Spanish Research Agency through the Maria de Maetzu Seal of Excellence to IRI (MDM-2016-0656). Julian Cayero is also supported by Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya, the European Social Fund (ESF) and the Agency for Management of University and Research Grants (AGAUR) under an FI-DGR grant (ref. 2016FI_B1 00024). Damiano Rotondo is also supported by a Juan de la Cierva-Formacion grant (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pose-graph SLAM sparsification using factor descent

  • Vallvé, Joan
  • Solà, Joan
  • Andrade-Cetto, Juan
Since state of the art simultaneous localization and mapping (SLAM) algorithms are not constant time, it is often necessary to reduce the problem size while keeping as much of the original graph's information content. In graph SLAM, the problem is reduced by removing nodes and rearranging factors. This is normally faced locally: after selecting a node to be removed, its Markov blanket sub-graph is isolated, the node is marginalized and its dense result is sparsified. The aim of sparsification is to compute an approximation of the dense and non-relinearizable result of node marginalization with a new set of factors. Sparsification consists on two processes: building the topology of new factors, and finding the optimal parameters that best approximate the original dense distribution. This best approximation can be obtained through minimization of the Kullback–Liebler divergence between the two distributions. Using simple topologies such as Chow–Liu trees, there is a closed form for the optimal solution. However, a tree is oftentimes too sparse and produces bad distribution approximations. On the contrary, more populated topologies require nonlinear iterative optimization. In the present paper, the particularities of pose-graph SLAM are exploited for designing new informative topologies and for applying the novel factor descent iterative optimization method for sparsification. Several experiments are provided comparing the proposed topology methods and factor descent optimization with state-of-the-art methods in synthetic and real datasets with regards to approximation accuracy and computational cost., This work has been supported by the Spanish Ministry of Economy and Competitiveness Project EB-SLAM [DPI2017-89564-P]; by the EU H2020 Project LOGIMATIC [H2020-Galileo-2015-1-687534]; and by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI [MDM-2016-0656].
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Practical Resolution Methods for MDPs in Robotics Exemplified with Disassembly Planning

  • Suárez Hernández, Alejandro
  • Torras, Carme
  • Alenyà, Guillem
In this letter, we focus on finding practical resolution methods for Markov decision processes (MDPs) in robotics. Some of the main difficulties of applying MDPs to real-world robotics problems are: first, having to deal with huge state spaces; and second, designing a method that is robust enough to dead ends. These complications restrict or make more difficult the application of methods, such as value iteration, policy iteration, or labeled real-time dynamic programming (LRTDP). We see in determinization and heuristic search a way to successfully work around these problems. In addition, we believe that many practical use cases offer the opportunity to identify hierarchies of subtasks and solve smaller, simplified problems. We propose a decision-making unit that operates in a probabilistic planning setting through stochastic shortest path problems, which generalize the most common types of MDPs. Our decision-making unit combines: first, automatic hierarchical organization of subtasks; and second, on-line resolution via determinization. We argue that several applications of planning benefit from these two strategies. We exemplify our approach with a robotized disassembly application. The disassembly problem is modeled in probabilistic planning definition language, and serves to define our experiments. Our results show many advantages of our method over LRTDP, such as a better capability to handle problems with large state spaces and state definitions that change when new fluents are discovered., This work is partially funded by the European project IMAGINE (Robots Understanding their Actions by Imagining their Effects), H2020-ICT-2016-1-731761, by the Spanish Ministry of Science and Innovation HuMoUR TIN2017-90086-R and the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reachability and stabilization of scheduled steady-states for LPV single-input systems

  • Corona, Darío
  • Cristofaro, Andrea
  • Rotondo, Damiano
The aim of this work is characterizing the class of LPV systems that admit steady-state trajectories depending exclusively on the scheduling parameter. In particular, it will be shown that only certain parameter dependent steady-state profiles are admissible and can be reached by means of a suitable control input. Furthermore, the asymptotic stability and the stabilization of such steady-states is investigated using Lyapunov-based techniques. Extensive numerical simulations illustrate and corroborate the theoretical results., This work has been partially funded by the Spanish Government and FEDER through the project CICYT DEOCS (ref. DPI2016-76493-C3-3-R), by AGAUR of the Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482), and by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Resilient distributed model predictive control for energy management of interconnected microgrids

  • Ananduta, Wicak
  • Maestre, Jose Maria
  • Ocampo-Martínez, Carlos
  • Ishii, Hideaki
Distributed energy management of interconnected microgrids that is based on model predictive control (MPC) relies on the cooperation of all agents (microgrids). This paper discusses the case in which some of the agents might perform one type of adversarial actions (attacks) and they do not comply with the decisions computed by performing a distributed MPC algorithm. In this regard, these agents could obtain a better performance at the cost of degrading the performance of the network as a whole. A resilient distributed method that can deal with such issues is proposed in this paper. The method consists of two parts. The first part is to ensure that the decisions obtained from the algorithm are robustly feasible against most of the attacks with high confidence. In this part, we formulate the economic dispatch problem, taking into account the attacks as a chance-constrained problem, and employ a two-step randomization-based approach to obtain a feasible solution with a predefined level of confidence. The second part consists in the identification and mitigation of the adversarial agents, which utilizes hypothesis testing with Bayesian inference and requires each agent to solve a mixed-integer problem to decide the connections with its neighbors. In addition, an analysis of the decisions computed using the stochastic approach and the outcome of the identification and mitigation method is provided. The performance of the proposed approach is also shown through numerical simulations., This work has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska‐Curie Grant 675318 (INCITE) and has been also supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM‐2016‐0656). Financial support by the Spanish MINECO project DPI2017‐86918‐R and the Japanese Society for the Promotion of Science (scholarship PE16048) is also gratefully acknowledged. The authors also acknowledge JST CREST Grants JPMJCR15K3 and JPMJCR15K5.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust fault and icing diagnosis in unmanned aerial vehicles using LPV interval observers

  • Rotondo, Damiano
  • Cristofaro, Andrea
  • Arne Johansen, Tor
  • Nejjari, Fatiha
  • Puig, Vicenç
This paper proposes a linear parameter varying (LPV) interval unknown input observer for the robust fault diagnosis of actuator faults and ice accretion in unmanned aerial vehicles (UAVs) described by an uncertain model. The proposed interval observer evaluates the set of values for the state, which are compatible with the nominal fault-free and icing-free operation and can be designed in such a way that some information about the nature of the unknown inputs affecting the system can be obtained, thus allowing the diagnosis to be performed. The proposed strategy has several advantages. First, the LPV paradigm allows taking into account operating point variations. Second, the noise rejection properties are enhanced by the presence of the integral term. Third, the interval estimation property guarantees the absence of false alarms. Linear matrix inequality–based conditions for the analysis/design of these observers are provided in order to guarantee the interval estimation of the state and the boundedness of the estimation. The developed theory is supported by simulation results, obtained with the uncertain model of a Zagi Flying Wing UAV, which illustrate the strong appeal of the methodology for identifying correctly unexpected changes in the system dynamics due to actuator faults or icing., EEA Financial Mechanism by a grantfrom Iceland, Liechtenstein, and Norway;Universidad Complutense de Madrid,Grant/Award Number:006-ABEL-IM-2014B; Spanish StateResearch Agency (AEI) and the EuropeanRegional Development Fund (ERFD),Grant/Award Numbers: CICYT DEOCSDPI2016-76493 and CICYT SCAVDPI2017-88403-R; DGR of the Generalitatde Catalunya, Grant/Award Number:2017/SGR/482; Spanish State ResearchAgency through the María de Maeztu Sealof Excellence to IRI, Grant/AwardNumber: MDM-2016-0656; Juan de laCierva Formación, Grant/Award Number:FJCI-2016-29019; Research Council ofNorway through the Centres of Excellencefunding scheme, Grant/Award Number:223254-AMOS; ERCIM Alain BensoussanFellowship programme
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Shape Basis Interpretation for Monocular Deformable 3-D Reconstruction

  • Agudo Martínez, Antonio
  • Moreno-Noguer, Francesc
In this paper, we propose a novel interpretable shape model to encode object nonrigidity. We first use the initial frames of a monocular video to recover a rest shape, used later to compute a dissimilarity measure based on a distance matrix measurement. Spectral analysis is then applied to this matrix to obtain a reduced shape basis, that in contrast to existing approaches, can be physically interpreted. In turn, these precomputed shape bases are used to linearly span the deformation of a wide variety of objects. We introduce the low-rank basis into a sequential approach to recover both camera motion and nonrigid shape from the monocular video, by simply optimizing the weights of the linear combination using bundle adjustment. Since the number of parameters to optimize per frame is relatively small, specially when physical priors are considered, our approach is fast and can potentially run in real time. Validation is done in a wide variety of real-world objects, undergoing both inextensible and extensible deformations. Our approach achieves remarkable robustness to artifacts such as noisy and missing measurements and shows an improved performance to competing methods., This work is supported in part by a Google Faculty Research Award, by the MINECO projects HuMoUR TIN2017-90086-R and Mar´ıa de Maeztu Seal of Excellence MDM-2016-0656.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Short-Term Human–Robot Interaction Adaptability in Real-World Environments

  • Andriella, Antonio
  • Torras, Carme
  • Alenyà, Guillem
In recent years there has been an increasing interest in deploying robotic systems in public environments able to effectively interact with people. To properly work in the wild, such systems should be robust and be able to deal with complex and unpredictable events that seldom happen in controlled laboratory conditions. Moreover, having to deal with untrained users adds further complexity to the problem and makes the task of defining effective interactions especially difficult. In this work, a Cognitive System that relies on planning is extended with adaptive capabilities and embedded in a Tiago robot. The result is a system able to help a person to complete a predefined game by offering various degrees of assistance. The robot may decide to change the level of assistance depending on factors such as the state of the game or the user performance at a given time. We conducted two days of experiments during a public fair. We selected random users to interact with the robot and only for one time. We show that, despite the short-term nature of human–robot interactions, the robot can effectively adapt its way of providing help, leading to better user performances as compared to a robot not providing this degree of flexibility., This project has been partially funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement SOCRATES (No 721619), by the Spanish Ministry of Science and Innovation HuMoUR (TIN2017-90086-R), and by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimal Energy Management in a Standalone Microgrid, with Photovoltaic Generation, Short-Term Storage, and Hydrogen Production

  • Cecilia, Andreu
  • Carroquino, Javier
  • Roda, Vicente
  • Costa Castelló, Ramon
  • Barreras Toledo, Félix
© 2020 by the authors., This paper addresses the energy management of a standalone renewable energy system. The system is configured as a microgrid, including photovoltaic generation, a lead-acid battery as a short term energy storage system, hydrogen production, and several loads. In this microgrid, an energy management strategy has been incorporated that pursues several objectives. On the one hand, it aims to minimize the amount of energy cycled in the battery, in order to reduce the associated losses and battery size. On the other hand, it seeks to take advantage of the long-term surplus energy, producing hydrogen and extracting it from the system, to be used in a fuel cell hybrid electric vehicle. A crucial factor in this approach is to accommodate the energy consumption to the energy demand and to achieve this, a model predictive control (MPC) scheme is proposed. In this context, proper models for solar estimation, hydrogen production, and battery energy storage will be presented. Moreover, the controller is capable of advancing or delaying the deferrable loads from its prescheduled time. As a result, a stable and efficient supply with a relatively small battery is obtained. Finally, the proposed control scheme has been validated on a real case scenario., This work has been partially funded by the Spanish national project DOVELAR ref. RTI2018-096001-B-C32 (MCIU/AEI/FEDER, UE). This work is supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482). This work has been done with the support of ACCIÓ (Operational Program FEDER Catalunya 2014-2020) through the REFER project (COMRDI15-1-0036-11)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3DPeople: Modeling the geometry of dressed humans

  • Pumarola, Albert
  • Sánchez-Riera, Jordi
  • Choi, Gary P. T.
  • Sanfeliu, Alberto
  • Moreno-Noguer, Francesc
Trabajo presentado en el 17th International Conference on Computer Vision, celebrado Seúl (Corea del Sur), del 27 de octubre al 2 de noviembre de 2019, Recent advances in 3D human shape estimation build upon parametric representations that model very well the shape of the naked body, but are not appropriate to represent the clothing geometry. In this paper, we present an approach to model dressed humans and predict their geometry from single images. We contribute in three fundamental aspects of the problem, namely, a new dataset, a novel shape parameterization algorithm and an end-to-end deep generative network for predicting shape. First, we present 3DPeople, a large-scale synthetic dataset with 2.5 Million photo-realistic images of 80 subjects performing 70 activities and wearing diverse outfits. Besides providing textured 3D meshes for clothes and body, we annotate the dataset with segmentation masks, skeletons, depth, normal maps and optical flow. All this together makes 3DPeople suitable for a plethora of tasks., This work is supported in part by an Amazon Research Award, the Croucher Foundation and the Spanish MiNeCo under projects HuMoUR TIN2017-90086-R, ColRobTransp DPI2016-78957-R and María de Maeztu Seal of Excellence MDM-2016-0656.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Absolute humanoid localization and mapping based on IMU Lie group and fiducial markers

  • Fourmy, Mederic
  • Atchuthan, Dinesh
  • Mansard, Nicolas
  • Solà, Joan
  • Flayols, Thomas
Trabajo presentado en el 19th International Conference on Humanoid Robots (Humanoids), celebrado en Toronto (Canadá) del 15 al 17 de octubre de 2019, Current locomotion algorithms in structured (in-door) 3D environments require an accurate localization. The several and diverse sensors typically embedded on legged robots (IMU, coders, vision and/or LIDARS) should make it possible if properly fused. Yet this is a difficult task due to the hetero-geneity of these sensors and the real-time requirement of the control. While previous works were using staggered approaches (odometry at high frequency, sparsely corrected from vision and LIDAR localization), the recent progress in optimal estimation, in particular in visual-inertial localization, is paving the way to a holistic fusion. This paper is a contribution in this direction. We propose to quantify how a visual-inertial navigation system can accurately localize a humanoid robot in a 3D indoor environment tagged with fiducial markers. We introduce a theoretical contribution strengthening the formulation of Forster's IMU pre-integration, a practical contribution to avoid possible ambiguity raised by pose estimation of fiducial markers, and an experimental contribution on a humanoid dataset with ground truth. Our system is able to localize the robot with less than 2 cm errors once the environment is properly mapped. This would naturally extend to additional measurements corresponding to leg odometry (kinematic factors) thanks to the genericity of the proposed pre-integration algebra., This work has been supported by the MEMMO European Union project within the H2020 Program under Grant Agreement No. 780684, the Spanish Ministry of Science, Innovation, and Universities project EB-SLAM (DPI2017-89564-P), by the EU H2020 project GAUSS (DPI2017-89564-P) and by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI MDM-2016-0656.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Actuator and sensor fault estimation based on a proportional-integral quasi-LPV observer with inexact scheduling parameters

  • Gómez-Peñate, Samuel
  • López-Estrada, Francisco-Ronay
  • Valencia-Palomo, Guillermo
  • Rotondo, Damiano
Trabajo presentado en el 3rd IFAC Workshop on Linear Parameter-Varying Systems, celebrado en Eindhoven (Países Bajos), del 4 al 6 de noviembre de 2019, This paper presents a method for actuator and sensor fault estimation based on a proportional-integral observer (PIO) for a class of nonlinear system described by a polytopic quasi-linear parameter varying (qLPV) mathematical model. Contrarily to the traditional approach, which considers measurable or unmeasurable scheduling parameters, this work proposes a methodology that considers inexact scheduling parameters. This condition is present in many physical systems where the scheduling parameters can be affected by noise, offsets, calibration errors, and other factors that have a negative impact on the measurements. A H¿ performance criterion is considered in the design in order to guarantee robustness against sensor noise, disturbance, and inexact scheduling parameters. Then, a set of linear matrix inequalities (LMIs) is derived by the use of a quadratic Lyapunov function. The solution of the LMI guarantees asymptotic stability of the PIO. Finally, the performance and applicability of the proposed method are illustrated through a numerical experiment in a nonlinear system., This work is supported by Tecnologico Nacional de Mexico and the National Council of Science and Technology (CONACyT). The support is gratefully acknowledged. This work has been also partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493), and by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adaptive online parameter estimation algorithm of PEM fuel cells

  • Xing, Yashan
  • Na, Jing
  • Costa Castelló, Ramon
Trabajo presentado en el 18th European Control Conference (ECC), celebrado en Nápoles (Italia), del 25 al 28 de junio de 2019, Since most of fuel cell models are generally nonlinearly parameterized functions, existing modeling techniques rely on the optimization approaches and impose heavy computational costs. In this paper, an adaptive online parameter estimation approach for PEM fuel cells is developed in order to directly estimate unknown parameters. The general framework of this approach is that the electrochemical model is first reformulated using Taylor series expansion. Then, one recently proposed adaptive parameter estimation method is further tailored to estimate the unknown parameters. In this method, the adaptive law is directly driven by the parameter estimation errors without using any predictors or observers. Moreover, parameter estimation errors can be guaranteed to achieve exponential convergence. Besides, the online validation of regressor matrix invertibility are avoided such that computation costs can be effectively reduced. Finally, comparative simulation results demonstrate that the proposed approach can achieve better performance than least square algorithm for estimating unknown parameters of fuel cells., This work was partially funded by the Spanish national project MICAPEM (ref. DPI2015- 69286-C3-2-R, MINECO/FEDER) and the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work was partially supported by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and Chinese Scholarship Council (CSC) under grant (201808390007). This work has been done with the partial support of ACCIO (Operational Program FEDER Catalunya 2014-2020) through the ´ REFER project (COMRDI15-1-0036-11)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A feedback simulation procedure for real-time control of urban drainage systems

  • Romero Ben, Luis
  • Sun, Congcong
  • Guasch Palma, Ramon
  • Joseph-Duran, Bernat
  • Meseguer, Jordi
  • Cembrano, Gabriela
  • Puig, Vicenç
Trabajo presentado en el 1st IFAC Workshop on Control Methods for Water Resource Systems CMWRS, celebrado en Delft (Países Bajos), los días 19 y 20 de septiembre de 2019, This paper presents a feedback simulation procedure for the real-time control (RTC) of urban drainage systems (UDS) with the aim of providing accurate state evolutions to the RTC optimizer as well as illustrating the optimization performance in a virtual reality. Model predictive control (MPC) has been implemented to generate optimal solutions for the multiple objectives of UDS using a simplified conceptual model. A high-fidelity simulator InfoWorks ICM is used to carry on the simulation based on a high level detailed model of a UDS. Communication between optimizer and simulator is realized in a feedback manner, from which both the state dynamics and the optimal solutions have been implemented through realistic demonstrations. In order to validate the proposed procedure, a real pilot based on Badalona UDS has been applied as the case study., The authors wish to thank the support by the European Commission research grant of project LIFE EFFIDRAIN (LIFE14 ENV/ES/000860), also thank the support from Spanish national project DEOCS (DPI2016-76493-C3-3-R). The authors also want to thank Aigües de Barcelona for the financial and technical support. This work is also supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An LMI-based heuristic algorithm for vertex reduction in LPV systems

  • Sanjuan, Adrián
  • Rotondo, Damiano
  • Nejjari, Fatiha
  • Sarrate, Ramon
The linear parameter varying (LPV) approach has proved to be suitable for controlling many non-linear systems. However, for those which are highly non-linear and complex, the number of scheduling variables increases rapidly. This fact makes the LPV controller implementation not feasible for many real systems due to memory constraints and computational burden. This paper considers the problem of reducing the total number of LPV controller gains by determining a heuristic methodology that combines two vertices of a polytopic LPV model such that the same gain can be used in both vertices. The proposed algorithm, based on the use of the Gershgorin circles, provides a combinability ranking for the different vertex pairs, which helps in solving the reduction problem in fewer attempts. Simulation examples are provided in order to illustrate the main characteristics of the proposed approach., This work has been funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects DEOCS (ref. MINECO DPI2016-76493) and SCAV (ref. MINECO DPI2017-88403-R), by AGAUR through the contract FI-AGAUR (ref. 2017FI-B00285) and by the DGR of Generalitat de Catalunya (SAC group Ref. 2017/SGR/482). This work has also been supported by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva—Formación (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A review and comparison of ontology-based approaches to robot autonomy

  • Olivares-Alarcos, Alberto
  • Beßler, Daniel
  • Khamis, Alaa
  • Goncalves, Paulo
  • Habib, Maki K.
  • Bermejo-Alonso, Julita
  • Barreto, Marcos
  • Diab, Mohammed
  • Rosell, Jan
  • Quintas, Joao
  • Olszewska, Joanna
  • Nakawala, Hirenkumar
  • Pignaton, Edison
  • Gyrard, Amelie
  • Borgo, Stefano
  • Alenyà, Guillem
  • Beetz, Michael
  • Li, Howard
Within the next decades, robots will need to be able to execute a large variety of tasks autonomously in a large variety of environments. To relax the resulting programming effort, a knowledge-enabled approach to robot programming can be adopted to organize information in re-usable knowledge pieces. However, for the ease of reuse, there needs to be an agreement on the meaning of terms. A common approach is to represent these terms using ontology languages that conceptualize the respective domain. In this work, we will review projects that use ontologies to support robot autonomy. We will systematically search for projects that fulfill a set of inclusion criteria and compare them with each other with respect to the scope of their ontology, what types of cognitive capabilities are supported by the use of ontologies, and which is their application domain., This work was partially funded by the following agencies: Deutsche Forschungsgemeinschaft (DFG) through the Collaborative Research Center EASE (1320); Regional Catalan Agency ACCIO through the RIS3CAT 2016 project SIMBIOTS (COMRDI16-1-0017); Spanish State ´ Research Agency through the Mar´ıa de Maeztu Seal of Excellence to IRI (MDM-2016-0656); Spanish Government through the project DPI2016-80077-R and grant 2017; FCT, through IDMEC, under LAETA, project UID/EMS/50022/2019; Project 0043- EUROAGE-4-E (POCTEP Programa Interreg V-A Spain-Portugal). J. Olszewska was partially supported by Innovate UK.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assistive robotics: Research challenges and ethics education initiatives, Robótica asistencial: retos de investigación e iniciativas educativas en roboética

  • Torras, Carme
[EN]Assistive robotics is a fast growing field aimed at helping healthcarers in hospitals, rehabilitation centers and nursery homes, as well as empowering people with reduced mobility at home, so that they can autonomously fulfill their daily living activities. The need to function in dynamic human-centered environments poses new research challenges: robotic assistants need to have friendly interfaces, be highly adaptable and customizable, very compliant and intrinsically safe to people, as well as able to handle deformable materials. Besides technical challenges, assistive robotics raises also ethical defies, which have led to the emergence of a new discipline: Roboethics. Several institutions are developing regulations and standards, and many ethics education initiatives include contents on human-robot interaction and human dignity in assistive situations. In this paper, the state of the art in assistive robotics is briefly reviewed, and educational materials from a university course on Ethics in Social Robotics and AI focusing on the assistive context are presented., [ES] La robótica asistencial es un campo en rápido crecimiento des-tinado a ayudar a los cuidadores en hospitales, centros de rehabilitación y residencias, así como a capacitar a las personas con movilidad reducida en el hogar, para que puedan realizar de forma autónoma sus activida-des cotidianas. La necesidad de desempeñarse en entornos dinámicos centrados en el ser humano plantea nuevos retos de investigación: los asistentes robóticos deben tener interfaces amigables, ser altamente adaptables y personalizables, muy compatibles y seguros para las perso-nas, así como ser capaces de manejar materiales deformables.Además de los desafíos técnicos, la robótica asistencial plantea también desafíos éticos, que han llevado a la aparición de una nueva disciplina: la roboética. Numerosas instituciones están elaborando reglamentos y normas, y muchas iniciativas de educación en ética incluyen contenidos sobre la interacción humano-robot y la dignidad humana en situaciones de asistencia.En este trabajo se revisa brevemente el estado del arte de la robótica asistencial y se presentan materiales educativos de un curso universitario sobre Ética de la Robótica Social e IA en el contexto asistencial., This work is partly supported by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme through the project CLOTHIL-DE - CLOTH manIpulation Learning from DEmonstrations (Advanced Grant agreement No 741930), and the Spanish Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Detailed 3D face reconstruction from a single RGB image

  • Rotger, Gemma
  • Moreno-Noguer, Francesc
  • Lumbreras, Felipe
  • Agudo Martínez, Antonio
This paper introduces a method to obtain a detailed 3D reconstruction of facial skin from a single RGB image. To this end, we propose the exclusive use of an input image without requiring any information about the observed material nor training data to model the wrinkle properties. They are detected and characterized directly from the image via a simple and effective parametric model, determining several features such as location, orientation, width, and height. With these ingredients, we propose to minimize a photometric error to retrieve the final detailed 3D map, which is initialized by current techniques based on deep learning. In contrast with other approaches, we only require estimating a depth parameter, making our approach fast and intuitive. Extensive experimental evaluation is presented in a wide variety of synthetic and real images, including different skin properties and facial expressions. In all cases, our method outperforms the current approaches regarding 3D reconstruction accuracy, providing striking results for both large and fine wrinkles., This work has been partially supported by the Spanish Ministry of Science and Innovation under projects FireDMMI TIN2014-56919-C3-2- R, BOSSS TIN2017-89723-P, and HuMoUR TIN2017- 90086-R; by the CSIC project R3OBJ 201850I099, and by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI MDM2016-0656.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Online learning and detection of faces with low human supervision

  • Villamizar, Michael
  • Sanfeliu, Alberto
  • Moreno-Noguer, Francesc
We present an efficient,online,and interactive approach for computing a classifier, called Wild Lady Ferns (WiLFs), for face learning and detection using small human supervision. More precisely, on the one hand, WiLFs combine online boosting and extremely randomized trees (Random Ferns) to compute progressively an efficient and discriminative classifier. On the other hand, WiLFs use an interactive human-machine approach that combines two complementary learning strategies to reduce considerably the degree of human supervision during learning. While the first strategy corresponds to query-by-boosting active learning, that requests human assistance over difficult samples in function of the classifier confidence, the second strategy refers to a memory-based learning which uses ¿ Exemplar-based Nearest Neighbors (¿ENN) to assist automatically the classifier. A pre-trained Convolutional Neural Network (CNN) is used to perform ¿ENN with high-level feature descriptors. The proposed approach is therefore fast (WilFs run in 1 FPS using a code not fully optimized), accurate (we obtain detection rates over 82% in complex datasets), and labor-saving (human assistance percentages of less than 20%). As a byproduct, we demonstrate that WiLFs also perform semi-automatic annotation during learning, as while the classifier is being computed, WiLFs are discovering faces instances in input images which are used subsequently for training online the classifier. The advantages of our approach are demonstrated in synthetic and publicly available databases, showing comparable detection rates as offline approaches that require larger amounts of handmade training data., This work is partially supported by the Spanish Ministry of Economy and Competitiveness under projects HuMoUR TIN2017-90086-R, ColRobTransp DPI2016-78957 and María de Maeztu Seal of Excellence MDM- 2016-0656.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reset control for DC-DC converters: an experimental application

  • Nair, Unnikrishnan Raveendran
  • Costa Castelló, Ramon
  • Baños, Alfonso
Power converters in grid connected systems are required to have fast response to ensure the stability of the system. The standard PI controllers used in most power converters are capable of fast response but with significant overshoot. In this paper a hybrid control technique for power converter using a reset PI + CI controller is proposed. The PI + CI controller can overcome the limitation of its linear counterpart (PI) and ensure a fast flat response for power converter. The design, stability and cost of feedback analysis for a DC-DC boost converter employing a PI + CI controller is explored in this work. The simulation and experimental results which confirm the fast, flat response will be presented and discussed., This work was supported in part by the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Skłodowska Curie under Grant 675318 (INCITE), in part by the Spanish State Research Agency through the Mara de Maeztu Seal of Excellence to IRI under Grant MDM-2016-0656, and in part by the Government of Spain under Project DPI2016-79278-C2-1-R, MICAPEM (ref. DPI2015- 69286-C3-2-R, MINECO/FEDER).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust spatio-temporal clustering and reconstruction of multiple deformable bodies

  • Agudo Martínez, Antonio
  • Moreno-Noguer, Francesc
In this paper we present an approach to reconstruct the 3D shape of multiple deforming objects from a collection of sparse, noisy and possibly incomplete 2D point tracks acquired by a single monocular camera. Additionally, the proposed solution estimates the camera motion and reasons about the spatial segmentation (i.e., identifies each of the deforming objects in every frame) and temporal clustering (i.e., splits the sequence into motion primitive actions). This advances competing work, which mainly tackled the problem for one single object and non-occluded tracks. In order to handle several objects at a time from partial observations, we model point trajectories as a union of spatial and temporal subspaces, and optimize the parameters of both modalities, the non-observed point tracks, the camera motion, and the time-varying 3D shape via augmented Lagrange multipliers. The algorithm is fully unsupervised and does not require any training data at all. We thoroughly validate the method on challenging scenarios with several human subjects performing different activities which involve complex motions and close interaction. We show our approach achieves state-of-the-art 3D reconstruction results, while it also provides spatial and temporal segmentation., This work is supported in part by a Google Faculty Research Award, by the Spanish Ministry of Science and Innovation under projects HuMoUR TIN2017-90086- R, and María de Maeztu Seal of Excellence MDM2016-0656.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Energy efficiency improvement through MPC-based peripherals management for an industrial process test-bench

  • Bermeo-Ayerbe, Miguel Ángel
  • Ocampo-Martínez, Carlos
Trabajo presentado en el 9th IFAC Conference on Manufacturing Modelling, Management and Control (MIM); celebrada en Berlín (Alemania), del 28 al 30 de agosto de 2019, High energy costs evince the growing need for energy efficiency in industrial companies. This paper presents a solution at the industrial machine level to obtain efficient energy consumption. Therefore, a controller inspired by the well-known model predictive control (MPC) strategy was developed for the management of peripheral devices. The validation of the control requires a test-bench to emulate the energy consumption of a manufacturing machine. The test-bench has four devices, two used to emulate the periodic and fixed energy consumption of the manufacturing process and two as peripherals, subject to rules associated with the process. Consequently, a subspace identification (SI) was employed to identify energy models to simulate the behavior of the device. As a final step, a performance comparison between a rule-based control (RBC) and the proposed predictive-like controller revealed the remarkable energy savings. The MPC results show an energy saving of around 3% with respect to RBC as well as an instant maximum energy consumption reduction of 8%, approximately., This work is supported by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI MDM-2016-0656 and the IKERCON projectfrom UPC.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On teaching digital control systems in a generic engineering degree

  • Lerma, Eneko
  • Costa Castelló, Ramon
  • Griñó, Robert
  • Sanchis, Carlos
  • Dormido, Sebastián
Trabajo presentado en el 12th IFAC Symposium on Advances in Control Education ACE , celebrado en Philadelphia, Pennsylvania (Estados Unidos), del 7 al 9 de julio de 2019, In this work, the subject of digital control taught in a generic engineering degree is described. In particular, the contents of the course, the experimental environment and the interactive tools used in teaching are discussed. This work collects the teaching experience obtained during the past twenty years by the teaching team of this subject at the Barcelona School of Industrial Engineering of the Universitat Politecnica de Catalunya., The work of R. Costa-Castello was partially supported by the Government of Spain through the Agencia Estatal de Investigacion projects DPI2015-69286-C3-2-R and Marıa de Maeztu Seal of Excellence to IRI (MDM-2016-0656), by the Generalitat de Catalunya through the Project 2017 SGR 482 and by the donation of Mathworks UPC-I-01523. The work of R. Griño was partially supported by the Government of Spain through the Agencia Estatal de Investigaci´on Project DPI2017-85404-P, by the Generalitat de Catalunya through the Project 2017 SGR 872 and by the donation of Mathworks UPC-I-01523. The work of E. Lerma was partially supported by the donation of Mathworks UPC-I-01523. The work of S. Dormido was partially supported by the Government of Spain through the Agencia Estatal de Investigacion projects DPI2017-84259-C2-2-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A review of convex approaches for control, observation and safety of linear parameter varying and Takagi-Sugeno systems

  • López-Estrada, Francisco-Ronay
  • Rotondo, Damiano
  • Valencia-Palomo, Guillermo
This paper provides a review about the concept of convex systems based on Takagi-Sugeno, linear parameter varying (LPV) and quasi-LPV modeling. These paradigms are capable of hiding the nonlinearities by means of an equivalent description which uses a set of linear models interpolated by appropriately defined weighing functions. Convex systems have become very popular since they allow applying extended linear techniques based on linear matrix inequalities (LMIs) to complex nonlinear systems. This survey aims at providing the reader with a significant overview of the existing LMI-based techniques for convex systems in the fields of control, observation and safety. Firstly, a detailed review of stability, feedback, tracking and model predictive control (MPC) convex controllers is considered. Secondly, the problem of state estimation is addressed through the design of proportional, proportional-integral, unknown input and descriptor observers. Finally, safety of convex systems is discussed by describing popular techniques for fault diagnosis and fault tolerant control (FTC)., This work has been supported by Tecnológico Nacional de México grants 6723.18-P and 5400.19-P, the Instituto de Ciencia Tecnológia e Innovación, Chiapas (ICTIECH) 1123/2019. This work has been partially funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects SCAV (ref. MINECO DPI2017-88403-R) and DEOCS (ref. MINECO DPI2016-76493), and also by AGAUR ACCIO RIS3CAT UTILITIES 4.0 – P7 SECUTIL. This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Natural teaching of robot-assisted rearranging exercises for cognitive training

  • Andriella, Antonio
  • Suárez Hernández, Alejandro
  • Segovia-Aguas, Javier
  • Torras, Carme
  • Alenyà, Guillem
Trabajo presentado en el 11th International Conference on Social Robotics, celebrado en Madrid (España), del 26 al 29 de noviembre de 2019, Social Assistive Robots are a powerful tool to be used in patients¿ cognitive training. The purpose of this study is to evaluate a new methodology to enable caregivers to teach cognitive exercises to the robot in an easy and natural way. We build upon our existing framework, in which a robot is employed to provide encouragement and hints while a patient is physically playing a cognitive exercise. In this paper, we focus on empowering the caregiver to easily teach new board exercises to the robot by providing positive examples. The proposed learning method has two main advantages i) the teaching procedure is human-friendly ii) the produced exercise rules are human-understandable. The learning algorithm is validated in 6 exercises with different characteristics, correctly identifying and representing the rules from a few examples., This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement SOCRATES MSCA-ITN-721619, by the Spanish Ministry of Science and Innovation HuMoUR TIN2017-90086-R, and by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Science-Fiction: A Mirror for the Fututre of Humankind, The engaging debate on AI and ethics favored by science-fiction

  • Torras, Carme
Digital technologies have become part of our everyday lives and are increasingly acting as intermediaries in our workplaces and personal relationships or even substituting them. The Internet of things, social networks, programs that learn by interacting with humans, assistive and companion robots, computer games with a purpose, serious games for social impact, roboadvisors, webs that offer digital immortality… These tools can, in a short time, modify the job market, flip someone’s reputation, transform a district, change our relationships —not just at work, but also within our families and close contacts— or extend what a person leaves behind after dying, which now includes a digital footprint., This work has been partly supported by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme through the project CLOTHILDE – CLOTH manIpulation Learning from DEmonstrations (Advanced Grant agreement No 741930), and the Spanish Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Versatile Gripper for Cloth Manipulation

  • Donaire, Sònia
  • Borràs, Julia
  • Alenyà, Guillem
  • Torras, Carme
Cloth manipulation has been mostly advancing in perception and modeling methods for cloth state estimation and grasping point detection. In comparison, less attention has been put on end-effector design. Indeed, most implementations use a parallel gripper that can only perform pinch grasps. Instead, a more versatile set of possible grasp types could ease many tasks by providing more support to certain parts of the object, as well as make feasible tasks that become very complex when executed with only pinch grasps. We present a versatile gripper design which, besides the common open-close thumb+finger(s) feature, it has a couple of reconfiguration degrees of freedom that offer, first, a wide base plane to provide support and, second, variable friction surface on the thumb tip. Our gripper can execute a versatile set of grasps that ease some complex tasks such as pick and place folded clothes or fold in the air. In addition, the variable friction mechanism enables a more robust pinch-and-slide manipulation to trace cloth edges. Our evaluation shows the gripper potential to execute a wide variety of cloth manipulation tasks, This work receives funding from the European Union Horizon 2020 Programme under grant agreement no. 741930 (CLOTHILDE), Spanish State Research Agency through the Mar´ıa de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the “Ramon y Cajal” Fellowship RYC-2017- 22703, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Benchmarking Bimanual Cloth Manipulation

  • García-Camacho, Irene
  • Lippi, Martina
  • Welle, Michael C.
  • Yin, Hang
  • Antonova, Rika
  • Varava, Anastasiia
  • Borràs, Julia
  • Torras, Carme
  • Marino, Alessandro
  • Alenyà, Guillem
  • Kragic, Danica
Cloth manipulation is a challenging task that, despite its importance, has received relatively little attention compared to rigid object manipulation. In this paper, we provide three benchmarks for evaluation and comparison of different approaches towards three basic tasks in cloth manipulation: spreading a tablecloth over a table, folding a towel, and dressing. The tasks can be executed on any bimanual robotic platform and the objects involved in the tasks are standardized and easy to acquire. We provide several complexity levels for each task, and describe the quality measures to evaluate task execution. Furthermore, we provide baseline solutions for all the tasks and evaluate them according to the proposed metrics., This work receives funding from the European Union Horizon 2020 Programme under grant agreement no. 741930 (CLOTHILDE), Spanish State Research Agency through the BURG project (CHIST-ERA - PCIN2019- 103447) and the Mar´ıa de Maeztu Seal of Excellence to IRI (MDM-2016- 0656), the “Ramon y Cajal” Fellowship RYC-2017-22703, the Knut and Alice Wallenberg Foundation, and the Swedish Research Council., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Grasping-Centered Analysis for Cloth Manipulation

  • Borràs, Julia
  • Alenyà, Guillem
  • Torras, Carme
Compliant and soft hands have gained a lot of attention in the past decade because of their ability to adapt to the shape of the objects, increasing their effectiveness for grasping. However, when it comes to grasping highly flexible objects such as textiles, we face the dual problem: it is the object that will adapt to the shape of the hand or gripper. In this context, the classic grasp analysis or grasping taxonomies are not suitable for describing textile objects grasps. This work proposes a novel definition of textile object grasps that abstracts from the robotic embodiment or hand shape and recovers concepts from the early neuroscience literature on hand prehension skills. This framework enables us to identify what grasps have been used in literature until now to perform robotic cloth manipulation, and allows for a precise definition of all the tasks that have been tackled in terms of manipulation primitives based on regrasps. In addition, we also review what grippers have been used. Our analysis shows how the vast majority of cloth manipulations have relied only on one type of grasp, and at the same time we identify several tasks that need more variety of grasp types to be executed successfully. Our framework is generic, provides a classification of cloth manipulation primitives and can inspire gripper design and benchmark construction for cloth manipulation., The research leading to these results receives funding from the European Research Council (ERC) from the European Union Horizon 2020 Programme under grant agreement no. 741930 (CLOTHILDE: CLOTH manIpulation Learning from DEmonstrations) and is also supported by the Spanish State Research Agency through the Mar´ıa de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the “Ramon y Cajal” Fellowship RYC-2017-22703., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Perception of cloth in assistive robotic manipulation tasks

  • Torras, Carme
  • Jiménez Schlegl, Pablo
Assistive robots need to be able to perform a large number of tasks that imply some type of cloth manipulation. These tasks include domestic chores such as laundry handling or bed-making, among others, as well as dressing assistance to disabled users. Due to the deformable nature of fabrics, this manipulation requires a strong perceptual feedback. Common perceptual skills that enable robots to complete their cloth manipulation tasks are reviewed here, mainly relying on vision, but also resorting to touch and force. The use of such basic skills is then examined in the context of the different cloth manipulation tasks, be them garment-only applications in the line of performing domestic chores, or involving physical contact with a human as in dressing assistance., This work was developed in the context of the project CLOTHILDE (“CLOTH manIpulation Learning from DEmonstrations”), which has received funding from the European Research Council (ERC) under the European Union’s Horizon2020 research and innovation programme (Advanced Grant Agreement No. 741930). This work is supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An MPC-enabled SWMM implementation of the Astlingen RTC benchmarking network

  • Sun, Congcong
  • Svensen, Jan Lorenz
  • Borup, Morten
  • Puig, Vicenç
  • Cembrano, Gabriela
  • Vezzaro, Luca
The advanced control of urban drainage systems (UDS) has great potential in reducing pollution to the receiving waters by optimizing the operations of UDS infrastructural elements. Existing controls vary in complexity, including local and global strategies, Real-Time Control (RTC) and Model Predictive Control (MPC). Their results are, however, site-specific, hindering a direct comparison of their performance. Therefore, the working group 'Integral Real-Time Control' of the German Water Association (DWA) developed the Astlingen benchmark network, which has been implemented in conceptual hydrological models and applied to compare RTC strategies. However, the level of detail of such implementations is insufficient for testing more complex MPC strategies. In order to provide a benchmark for MPC, this paper presents: (1) The implementation of the conceptual Astlingen system in an open-source hydrodynamic model (EPA-SWMM), and (2) the application of an MPC strategy to the developed SWMM model. The MPC strategy was tested against traditional and well-established local and global RTC approaches, demonstrating how the proposed benchmark system can be used to test and compare complex control strategies., This work is supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656), by the Institute of Robotics Industry through the TWINs project, by Innovation Fond Denmark through the Water Smart City project (project 5157-00009B), and by the European Regional Development Fund through the NOAH Project (Interreg Baltic Sea Region Programme Grant #R093).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Model Predictive Control-Based Energy Management Scheme for Hybrid Storage System in Islanded Microgrids

  • Nair, Unnikrishnan Raveendran
  • Costa Castelló, Ramon
Model predictive control (MPC) facilitates online optimal resource scheduling in electrical networks, thermal systems, water networks, process industry to name a few. In electrical systems, the capability of MPC can be used not only to minimise operating costs but also to improve renewable energy utilisation and energy storage system degradation. This work assesses the application of MPC for energy management in an islanded microgrid with PV generation and hybrid storage system composed of battery, supercapacitor and regenerative fuel cell. The objective is to improve the utilisation of renewable generation, the operational efficiency of the microgrid and the reduction in rate of degradation of storage systems. The improvements in energy scheduling, achieved with MPC, are highlighted through comparison with a heuristic based method, like Fuzzy inference. Simulated behaviour of an islanded microgrid with the MPC and fuzzy based energy management schemes will be studied for the same. Apart from this, the study also carries out an analysis of the computational demand resulting from the use of MPC in the energy management stage. It is concluded that, compared to heuristic methods, MPC ensures improved performance in an islanded microgrid., This work was supported in part by the European Union’s Horizon 2020 Research and Innovation Program under the Marie Skłodowska Curie under Grant 675318 (INCITE), in part by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI under Grant MDM-2016-0656, and in part by the Spanish National Project DOVELAR (MCIU/AEI/FEDER, UE) under Grant RTI2018-096001-B-C32.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cognitive System Framework for Brain-Training Exercise Based on Human-Robot Interaction

  • Andriella, Antonio
  • Torras, Carme
  • Alenyà, Guillem
Every 3 seconds, someone develops dementia worldwide. Brain-training exercises, preferably involving also physical activity, have shown their potential to monitor and improve the brain function of people affected by Alzheimer disease (AD) or mild cognitive impairment (MCI). This paper presents a cognitive robotic system designed to assist mild dementia patients during brain-training sessions of sorting tokens, an exercise inspired by the Syndrom KurzTest neuropsychological test (SKT). The system is able to perceive, learn and adapt to the user’s behaviour and is composed of two main modules. The adaptive module based on representing the human-robot interaction as a planning problem, that can adapt to the user performance offering different encouragement and recommendation actions using both verbal and gesture communication in order to minimize the time spent to solve the exercise. As safety is a very important issue, the cognitive system is enriched with a safety module that monitors the possibility of physical contact and reacts accordingly. The cognitive system is presented as well as its embodiment in a real robot. Simulated experiments are performed to (i) evaluate the adaptability of the system to different patient use-cases and (ii) validate the coherence of the proposed safety module. A real experiment in the lab, with able users, is used as preliminary evaluation to validate the overall approach. Results in laboratory conditions show that the two presented modules effectively provide additional and essential functionalities to the system, although further work is necessary to guarantee robustness and timely response of the robot before testing it with patients., This project has been partially funded by the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement SOCRATES (No 721619), by the Spanish Ministry of Science and Innovation HuMoUR (TIN2017-90086-R), and by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Control-oriented modelling and analysis of a solid oxide fuel cell system

  • Xing, Yashan
  • Costa Castelló, Ramon
  • Na, Jing
  • Renaudineau, Hugues
In this paper, a control-oriented model of a solid oxide fuel cell system is formulated and analyzed in detail. First, a lumped model based on first principle laws is formulated and tuned using experimental data coming from a real solid oxide fuel cell system test bench. The model calibration is carried out based on an optimization approach to minimize the error between the experimental data and the model one. To systematically analyze the system behavior, an equilibrium point analysis is formulated and developed. The analysis results show the maximum steady-state electrical power under each constant stack temperature. This will allow to appropriately select operation points during the system operation. Secondly, Lyapunov's theory is used to characterize the local stability of the equilibrium points. The results show that the equilibrium points are locally stable. Besides, comparison between the initial nonlinear model with the linearized model is performed to show the efficacy of the linearised model analysis. Finally, the frequency response of the linearized model is performed. This analysis provides key information about control system design in order to efficiently operate the solid oxide fuel cell system., This work was partially funded by ACCIÓ (Operational Program FEDER Catalunya 2014-2020) through the REFER project (COMRDI15-1-0036-11), the Spanish national project DOVELAR (ref. RTI2018-096001-B-C32) and the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work was partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and Chinese Scholarship Council (CSC) under grant (201808390007). This work was partially funded by National Natural Science Foundation of China under Grants 61922037.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Factors influencing the stormwater quality model of sewer networks and a case study of Louis Fargue urban catchment in Bordeaux, France

  • Sun, Congcong
  • Parellada, Benjamí
  • Feng, Jing
  • Puig, Vicenç
  • Cembrano, Gabriela
Pollution caused by combined sewer overflows has become a global threat to the environment. Under this challenge, quality-based real-time control (RTC) is considered as an effective approach to minimize pollution through generating optimal operation strategies for the sewer infrastructure. To suit the fast computation requirement of RTC implementation, simplified quality models are required. However, due to the hydrological complexity, it is not easy to develop simplified quality models which are amenable to be used in real-time computations. Under this context, this paper contributes a preliminary analysis of influencing factors for the quality models of sewer networks in order to give supportive knowledge for both model development and application. Conceptual quality models which were proposed previously by the authors, with total suspended solids (TSS) as quality indicator, are used in this study. A clustering algorithm is used for exploratory analysis. Further analysis about the correlations between different factors and model performance is also carried out. The study and analysis are demonstrated on a real pilot based on the Louis Fargue urban catchment in Bordeaux. Conclusive results about the influencing factors, flow rate, rain intensity and pipe length, as well as their correlations with the TSS models are elaborated., The authors wish to thank the support received by the European Commission research grant of project LIFE EFFIDRAIN (LIFE14 ENV/ES/000860), and the support from Spanish national project DEOCS (DPI2016-76493-C3-3-R). The authors also want to thank Bordeaux Metropole and Aigües de Barcelona for the financial and technical support. This work is also supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656), by the Institute of Robotics Industry through the TWINs project.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Observador de alta ganancia con zona muerta ajustable para estimar la saturación de agua líquida en pilas de combustible tipo PEM, High gain observer with dynamic deadzone to estimate liquid water saturation in PEM fuel cells

  • Cecilia, Andreu
  • Costa Castelló, Ramon
[EN] In the area of PEM fuel cells, water management remains one of the most challenging issues affecting PEMFC efficiency and lifetime. Liquid water active control and supervision techniques are limited by the absence of online sensors that can estimate the liquid water saturation. For this reason, this work presents the design of a state observer to estimate the cathode catalyst layer's liquid water saturation of an open-cathode PEM fuel cell. The proposed observer is based on High-Gain techniques, and is modified with a dynamic dead-zone which reduces the observer's noise sensibility. The results have been validated through numerical simulation and experiments. It is shown that, in the absence of noise, the proposed observer presents a similar performance than its non dead-zone equivalent. Moreover, in the presence of noise, the dead-zone significantly reduces the estimation error induced by it., [ES] En el campo de las pilas de combustible PEM, la gestion´ de agua l´ıquida es una de las problematicas ´ mas´ importantes que afectan a la eficiencia y vida util ´ del sistema. Las tecnicas ´ de control activo y supervision´ del agua se ven limitadas por la ausencia de sensores que puedan medir la saturacion´ de agua l´ıquida en l´ınea. Por eso, en este trabajo se presenta el diseno˜ de un observador de estado para la estimacion´ de la saturacion´ de agua l´ıquida en la capa catalizadora del catodo ´ de una pila de combustible PEM de catodo ´ abierto. El observador propuesto se basa en tecnicas ´ de alta ganancia. Ademas, ´ se modifica c on u na f uncion´ de zona muerta autoajustable con el fin de reducir su sensibilidad al ruido en la medida. Los resultados se han validado mediante simulacion´ numerica ´ y experimentacion. ´ Estos muestran que, en ausencia de ruido, el observador propuesto presenta unas prestacionessimilares a las de su equivalente sin zona muerta. Ademas, ´ en presencia de ruido, la zona muerta disminuye significativamente el error de estimacion´ inducido por este., Este proyecto se ha financiado parcialmente por el proyecto DOVELAR (ref. RTI2018-096001-B-C32). Este trabajo se ha realizado con el apoyo de la Agencia Estatal de Investigacion´ espanola a trav ˜ es del sello de excelencia de Marıa de Maeztu, IRI (MDM-2016-0656). Este trabajo se ha financiado parcialmente por AGAUR of Generalitat de Catalunya a traves de la ´ subvencion del grupo Advanced Control Systems (SAC) (2017 ´ SGR 482). Este trabajo se ha realizado con el apoyo de ACCIO´ (Operational Program FEDER Catalunya 2014-2020) a traves´ de REFER project (COMRDI15-1-0036-11).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Integrated pollution-based real-time control of sanitation systems

  • Sun, Congcong
  • Romero Ben, Luis
  • Joseph-Duran, Bernat
  • Meseguer, Jordi
  • Muñoz, Eduard
  • Guasch Palma, Ramon
  • Martínez, Montse
  • Puig, Vicenç
  • Cembrano, Gabriela
An integrated pollution-based real-time control (RTC) approach is proposed for a sewer network (SN) integrated with wastewater treatment plants (WWTPs) in a sanitation system (SS) to mitigate the impacts of pollution from combined sewer overflows (CSOs) on ecosystems. To obtain the optimal solution for the SS while considering both quantity and quality dynamics for multiple objectives, model predictive control (MPC) is selected as the optimal control method. To integrate SN and WWTP management, a feedback coordination algorithm is developed. A closed-loop virtual-reality simulator is used to assess the results of the optimal management approach achieved by applying MPC. The Badalona SS (Spain) provides a pilot case study to assess the efficacy and applicability of the proposed approach. A comparison with local rule-based and volume-based control strategies currently in use indicates that the proposed integrated pollution-based RTC approach can reduce the pollutant loads released to the receiving environment., The authors wish to acknowledge the support from the European Commission research grant of project LIFE EFFIDRAIN (LIFE14 ENV/ES/000860), from Spanish national project DEOCS (MINECO DPI 2016-76493) and the internal project TWINs from the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). The authors also thank Aigües de Barcelona for their financial and technical support. Considering the fact that data, models and tools used in this research are confidential or commercial, we refer other researchers to contact SUEZ Spain Group (for access to detailed, simplified models; the Closed-loop Simulation Framework software; and the rain data) and Innovyze (for licenses to InfoWorks ICM).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Leak localization in water distribution networks using pressure and data-driven classifier approach

  • Sun, Congcong
  • Parellada, Benjamí
  • Puig, Vicenç
  • Cembrano, Gabriela
Leaks in water distribution networks (WDNs) are one of the main reasons for water loss during fluid transportation. Considering the worldwide problem of water scarcity, added to the challenges that a growing population brings, minimizing water losses through leak detection and localization, timely and effciently using advanced techniques is an urgent humanitarian need. There are numerous methods being used to localize water leaks in WDNs through constructing hydraulic models or analyzing flow/pressure deviations between the observed data and the estimated values. However, from the application perspective, it is very practical to implement an approach which does not rely too much on measurements and complex models with reasonable computation demand. Under this context, this paper presents a novel method for leak localization which uses a data-driven approach based on limit pressure measurements in WDNs with two stages included: (1) Two different machine learning classifiers based on linear discriminant analysis (LDA) and neural networks (NNET) are developed to determine the probabilities of each node having a leak inside a WDN; (2) Bayesian temporal reasoning is applied afterwards to rescale the probabilities of each possible leak location at each time step after a leak is detected, with the aim of improving the localization accuracy. As an initial illustration, the hypothetical benchmark Hanoi district metered area (DMA) is used as the case study to test the performance of the proposed approach. Using the fitting accuracy and average topological distance (ATD) as performance indicators, the preliminary results reaches more than 80% accuracy in the best cases., This work has been funded by the Ministerio de Economa, Industria y Competitividad (MEINCOP) of the Spanish Government through the project DEOCS (ref. DPI2016-76493) by MEICOMP and FEDER, through the grant IJCI-2014-20801 and by the Catalan Agency for Management of University and Research Grants (AGAUR), the European Social Fund (ESF) and the Secretary of University and Research of the Department of Companies and Knowledge of the Government of Catalonia through the grants FI-DGR 2015 (ref. 2015 FI_B 00591). Besides, this work has also been supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On Closed-Form Formulas for the 3-D Nearest Rotation Matrix Problem

  • Sarabandi, Soheil
  • Shabani, Arya
  • Porta, Josep M.
  • Thomas, Federico
The problem of restoring the orthonormality of a noisy rotation matrix by finding its nearest correct rotation matrix arises in many areas of robotics, computer graphics, and computer vision. When the Frobenius norm is taken as the measure of closeness, the solution is usually computed using the singular value decomposition (SVD). A closed-form formula exists but, as it involves the roots of a polynomial of third degree, it is assumed to be too complicated and numerically ill-conditioned. In this article, we show how, by carefully using some algebraic recipes scattered in the literature, it is possible to derive a simple and yet numerically stable formula for most practical applications. Moreover, by relying on a result that permits obtaining the quaternion corresponding to the sought optimal rotation matrix, we present another closed-form formula that provides a good approximation to the optimal one using only the elementary algebraic operations of addition, subtraction, multiplication, and division. These two closed-form formulas are compared with respect to the SVD in terms of accuracy and computational cost., This work was partially supported by the Spanish Ministry of Economy and Competitiveness through the projects DPI2017-88282-P and MDM-2016-0656.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimal energy dispatch in a smart micro-grid system using economic model predictive control

  • Nassourou, M.
  • Blesa, Joaquim
  • Puig, Vicenç
The problem of energy dispatch in heterogeneous complex systems such as smart grids cannot be efficiently addressed using classical control or ad hoc methods. This article discusses the application of economic model predictive control to the management of a smart micro-grid system connected to an electrical power grid. The considered system is composed of several subsystems, namely, some photovoltaic panels, a wind generator, a hydroelectric generator, a diesel generator, and some storage devices (batteries). The batteries are charged with the energy from the photovoltaic panels, wind and hydroelectric generators, and they are discharged whenever the generators produce less energy than needed. The subsystems are interconnected via a DC Bus, from which load demands are satisfied. Modeling smart grids components is based on the generalized flow-based networked systems paradigm, and assuming energy generators to be stable, load demands and energy prices are known. This study shows that economic model predictive control is economically superior to a two-layer hierarchical model predictive control., This work has been partially funded by the Spanish Ministry of Economy and Competitiveness (MINECOP) and FEDER through the project HARCRICS (ref. DPI2014-58104- R) and through the grant IJCI-2014-20801 and by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

People's adaptive side-by-side model evolved to accompany groups of people by social robots

  • Repiso, Ely
  • Garrell, Anaís
  • Sanfeliu, Alberto
The presented method implements a robot accompaniment in an adaptive side-by-side formation of a single person or a group of people. The method enhances our previous robot adaptive side-by-side behavior allowing the robot to accompany a group of people, not only one person. Adaptive means that the robot is capable to adjust its position and velocity to the behavior of the group being accompanied, without bothering other pedestrians in the environment, as well as facilitating the group navigation to avoid static and dynamic obstacles. Furthermore, the robot can deal with the random factor of human behavior in several situations. Firstly, if other people interfere in the path of the companions, the robot leaves space for the person of the group that has to avoid those other people, by approaching the other companion. Also, without invading any personal space. Secondly, if the people of the group changes their physical position inside the group formation, then the robot adapts to them dynamically by changing from the lateral position to the central position of the formation or otherwise. Thirdly, the robot adapts to changes in the velocity of people in the group and other people that interfere in the path of the group, in magnitude and orientation. Fourthly, the robot can deal with occlusions of one accompanied person by the other. The method has been validated using synthetic experiments and real-life experiments with our robot. Finally, we developed an user study comparing the method with a Wizard of Oz., Work supported by the Spanish Ministry of Science and Innovation under project ColRobTransp (DPI2016-78957-RAEI/FEDER EU), TERRINet (H2020-INFRAIA-2017-1-two-stage-730994), by the Spanish State Research Agency through the Mar´ıa de Maeztu Seal of Excellence to IRI (MDM-2016-0656). Ely Repiso is also suported by Spanish Ministry of Science and Innovation under a FPI-grant, BES-2014-067713
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Real-time control of urban water cycle under cyber-physical systems framework

  • Sun, Congcong
  • Puig, Vicenç
  • Cembrano, Gabriela
The urban water cycle (UWC), which is composed of the water supply system (WSS) and urban drainage system (UDS), is a critical infrastructure required for the functioning of urban society. Considering the growing pollution and subsequent water scarcity caused by increasing urbanization and climate change, efficient UWC management is required to maintain resource sustainability and environmental protection. Cyber-physical systems (CPSs) provide a technological suite for the efficient management of critical systems. To exploit advantages of CPS for UWC, this paper proposes a CPS-based management framework enabling supervision, subsystem interoperability, and integrated optimization of UWC: (1) Firstly, clear definitions are provided to demonstrate that UWC systems can be considered as CPSs. (2) A multi-layer CPS-based supervision framework is presented afterwards, conceptually dividing the physical UWC and its digital counterpart into Supervision&Control, Scheduling, Digital Twin, and Water Users and Environment four layers. (3) The information flows that interact with each layer, as well as a key aspect of CSP operation, namely the interoperability among subsystems in the context of UWC, are also addressed. (4) To demonstrate advantages of supervision and interoperability of subsystems under the CPS framework, an integrated optimizer based on model predictive control (MPC) is applied and compared against the individual control of each system. A real case study of the WSS and UDS in Barcelona UWC is applied in order to validate the proposed approaches through virtual reality simulations based on MATLAB/SIMULIN and EPA-SWMM., This work is partially funded by grants LIFE EFFIDRAIN LIFE14 ENV/ES/00080, EFFINET FP7-ICT-2011-8-318556, internal project of TWINs, and also supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Recent advances on optimization for control, observation, and safety

  • Valencia-Palomo, Guillermo
  • López-Estrada, Francisco-Ronay
  • Rotondo, Damiano
Mathematical optimization is the selection of the best element in a set with respect to a given criterion. Optimization has become one of the most commonly used tools in modern control theory to compute control laws, adjust the controller parameters (tuning), estimate unmeasured states, find suitable conditions to fulfill a given closed-loop property, carry out model fitting, among others. Optimization is also used in the design of fault detection and isolation systems, due to the complexity of automated installations and to prevent safety hazards and huge production losses that require the detection and identification of any kind of fault, as early as possible, as well as the minimization of their impacts by implementing real-time fault detection and fault-tolerant operations systems where optimization algorithms play an important role. Recently, it has been proved that many optimization problems with convex objective functions and linear matrix inequality (LMI) constraints can be solved efficiently using existing software, which increases the flexibility and applicability of the control algorithms. Therefore, real-world control systems need to comply with several conditions and constraints that have to be taken into account in the problem formulation, which represents a challenge in the application of the optimization algorithms. This special issue aims at offering an overview of the state-of-the-art of the most advanced (online and offline) optimization techniques and their applications in control engineering., This work was funded by Tecnológico Nacional de México under the program “Investigación Científica Básica y Aplicada”. This work has been also supported by the AEI through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and the grant Juan de la Cierva-Formacion (FJCI-2016-29019).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Redox flow batteries: A literature review oriented to automatic control

  • Clemente, Alejandro
  • Costa Castelló, Ramon
This paper presents a literature review about the concept of redox flow batteries and its automation and monitoring. Specifically, it is focused on the presentation of all-vanadium redox flow batteries which have several benefits, compared with other existing technologies and methods for energy stored purposes. The main aspects that are reviewed in this work correspond to the characterization, modeling, supervision and control of the vanadium redox flow batteries. A research is presented where redox flow batteries are contextualized in the current energy situation, compared with other types of energy storage systems. Furthermore, a presentation about the current challenges on research, and the main existing installations is view. A discussion about the main dynamic models that have been proposed during last years, as well as the different control strategies and observers, is presented., This research was funded by the CSIC under the PTI FLOWBAT 2021 project (reference: 642 201980E101), the Spanish Ministry of Economy and Competitiveness under Projects CICYT RTI2018-094665-B-I00, DOVELAR ref. RTI2018-096001-B-C32 (MCIU/AEI/FEDER, UE) and María de Maeztu Seal of Excellence to IRI (MDM-2016-0656), and by the Generalitat de Catalunya through the Project 2017 SGR 482.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust Repetitive Control of Power Inverters for Standalone Operation in DG Systems

  • Ramos, German A.
  • Isaza Ruget, Ricardo
  • Costa Castelló, Ramon
Standalone operation of an inverted-based distributed generation unit is performed in voltage control mode. In this mode, it is important that the controller provides tracking and rejection of periodic signals. Strategies like Repetitive Control (RC) are well suited in the voltage control of power inverters. However, the robustness of repetitive controllers is importantly affected by the connected loads. The reason is that the load modifies the dynamics of the system where the design of the RC relies on. Having a low bandwidth action can reduce the problem but with the cost of degrading the voltage waveform and transient response. As an alternative, an H design is proposed for the RC of voltage source inverters. In this proposal the load is directly treated as an unstructured uncertainty. With this approach, the design procedure directly maximizes the robust stability margin of the system against load variations/uncertainty. Additionally, the analysis provides some insight about the design of the inverter LC filter. Experimental results show that a remarkable Total Harmonic Distortion and good transient response are obtained for a large variety of loads., This work has been partially funded by the Spanish national project DOVELAR ref. RTI2018-096001-B-C32 (MCIU/AEI/FEDER, UE). This work is supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482). This work is partially funded by DIB Universidad Nacional de Colombia (Projects under Hermes codes 35664 and 41000).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Position and Singularity Analysis of a Class of Planar Parallel Manipulators with a Reconfigurable End-Effector

  • Marchi, Tommaso
  • Mottola, Giovanni
  • Porta, Josep M.
  • Thomas, Federico
  • Carricato, Marco
Parallel robots with configurable platforms are a class of robots in which the end-effector has an inner mobility, so that its overall shape can be reconfigured: in most cases, the end-effector is thus a closed-loop kinematic chain composed of rigid links. These robots have a greater flexibility in their motion and control with respect to rigid-platform parallel architectures, but their kinematics is more challenging to analyze. In our work, we consider <i>n</i>-<span style="text-decoration: underline;">R</span>RR planar configurable robots, in which the end-effector is a chain composed of <i>n</i> links and revolute joints, and is controlled by <i>n</i> rotary actuators located on the base of the mechanism. In particular, we study the geometrical design of such robots and their direct and inverse kinematics for <inline-formula><math display="inline"><semantics><mrow><mi>n</mi><mo>=</mo><mn>4</mn></mrow></semantics></math></inline-formula>, <inline-formula><math display="inline"><semantics><mrow><mi>n</mi><mo>=</mo><mn>5</mn></mrow></semantics></math></inline-formula> and <inline-formula><math display="inline"><semantics><mrow><mi>n</mi><mo>=</mo><mn>6</mn></mrow></semantics></math></inline-formula>; we employ the bilateration method, which can simplify the kinematic analysis and allows us to generalize the approach and the results obtained for the 3-<span style="text-decoration: underline;">R</span>RR mechanism to <i>n</i>-<span style="text-decoration: underline;">R</span>RR robots (with <inline-formula><math display="inline"><semantics><mrow><mi>n</mi><mo>></mo><mn>3</mn></mrow></semantics></math></inline-formula>). Then, we study the singularity configurations of these robot architectures. Finally, we present the results from experimental tests that have been performed on a 5–<span style="text-decoration: underline;">R</span>RR robot prototype., This research was funded by the Spanish Ministry of Economy and Competitiveness grants number DPI2017-88282-P and MDM-2016-0656. The APC was funded by Marco Carricato., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chattering free sliding mode observer estimation of liquid water fraction in proton exchange membrane fuel cells

  • Luna, Julio
  • Costa Castelló, Ramon
  • Strahl, Stephan
The aim of this work is to deploy and experimentally validate a model-based strategy to estimate unmeasurable variables in a proton exchange membrane (PEM) fuel cell. First, a nonlinear PEM fuel cell dynamical model is implemented and calibrated using an optimisation approach that takes real measurement data as input. Then, an advanced observation approach is developed to retrieve non-measurable data from the fuel cell. Two states are estimated in this work: the fuel cell temperature and the internal liquid water fraction. To achieve this, a model-based high-order sliding mode observer (HOSM) with chattering-free capabilities is deployed. The fuel cell temperature is measured in real time to drive the estimation error to zero in a finite amount of time. Finally, the methodology is validated using experimental data stemming from a laboratory test station, comparing the the HOSM observer with and without chattering-free gain., This work has been partially funded by the Spanish national project DOVELAR (ref. RTI2018-096001- B-C32, MINECO/FEDER), the Spanish State Research Agency through the Mar´ıa de Maeztu Seal of Excellence to IRI (MDM-2016-0656), and AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Temperature Control for a Proton-Exchange Membrane Fuel Cell System with Unknown Dynamic Compensations

  • Xing, Yashan
  • Costa Castelló, Ramon
  • Na, Jing
Numerous control strategies of temperature regulation have been carried out for proton-exchange membrane fuel cell systems including a cooling fan in order to ensure operation at the desired condition and extend the lifetime of the fuel cell stack. However, most existing control strategies are developed without considering the efficiency limitation of the cooling system such that the cooling fan may be unable to eliminate the additional heat. Moreover, there are unknown modelling errors, external disturbance and noise during modelling and experiment processes for fuel cells. Due to those unknown dynamics, the conventional control strategies may fail to achieve the expectant results. To address this issue, an alternative control strategy is proposed in this paper, which consists of a composite proportional-integral (PI) controller with an unknown system dynamics estimator. First, the control strategy is developed by reducing the temperature of input air through the humidifier and simultaneously increasing the mass flow of air in order to eliminate the excess heat that a cooling fan cannot remove. Moreover, an unknown system dynamics estimator is proposed in order to compensate the effect of the unknown dynamics. The construction of the estimator is designed through finding an invariant manifold which implies the relation between known variables and the unknown manifold. The invariant manifold is derived by applying a simple low-pass filter to the system which is beneficial to avoid the requirement of the unmeasurable state derivative. Furthermore, the proposed estimator is easily merged into the proposed PI control strategy and ensures the exponential convergence of estimated errors. Besides, the estimator is further modified such that the derivative of the desired temperature is not required in the controller. Finally, numerical simulations of the PEMFC system are provided and the results illustrate the efficacy of the proposed control strategy., This work was partially funded by the Spanish National Project DOVELAR (ref. RTI2018-096001-B-C32), the AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482), and the Spanish State Research Agency through the Mar´ıa de Maeztu Seal of Excellence to IRI (MDM-2016-0656). )is work was partially funded by the Chinese Scholarship Council (CSC) under grant (201808390007). )is work was partially funded by National Natural Science Foundation of China under Grants 61922037 and 61873115.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Voltage H∞ Control of a Vanadium Redox Flow Battery

  • Clemente, Alejandro
  • Andrés, Germán
  • Costa Castelló, Ramon
Redox flow batteries are one of the most relevant emerging large-scale energy storage technologies. Developing control methods for them is an open research topic; optimizing their operation is the main objective to be achieved. In this paper, a strategy that is based on regulating the output voltage is proposed. The proposed architecture reduces the number of required sensors. A rigorous design methodology that is based on linear H∞ synthesis is introduced. Finally, some simulations are presented in order to analyse the performance of the proposed control system. The results show that the obtained controller guaranties robust stability and performance, thus allowing the battery to operate over a wide range of operating conditions. Attending to the design specifications, the controlled voltage follows the reference with great accuracy and it quickly rejects the effect of sudden current changes, This research was funded by the CSIC under the PTI FLOWBAT 2021 project (reference: 642 201980E101), the Spanish Ministry of Economy and Competitiveness under Project DOVELAR ref. RTI2018-096001-B-C32 (MCIU/AEI/FEDER, UE), María de Maeztu Seal of Excellence to IRI (MDM-2016-0656), and by the Generalitat de Catalunya through the Project 2017 SGR 482.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adaptive Estimation of Time-Varying Parameters with Application to Roto-Magnet Plant

  • Na, Jing
  • Xing, Yashan
  • Costa Castelló, Ramon
This paper presents an alternative adaptive parameter estimation framework for nonlinear systems with time-varying parameters. Unlike existing techniques that rely on the polynomial approximation of time-varying parameters, the proposed method can directly estimate the unknown time-varying parameters. Moreover, this paper proposes several new adaptive laws driven by the derived information of parameter estimation errors, which achieve faster convergence rate than conventional gradient descent algorithms. In particular, the exponential error convergence can be rigorously proved under the well-recognized persistent excitation condition. The robustness of the developed adaptive estimation schemes against bounded disturbances is also studied. Comparative simulation results reveal that the proposed approaches can achieve better estimation performance than several other estimation algorithms. Finally, the proposed parameter estimation methods are verified by conducting experiments based on a roto-magnet plant., This work was supported by the National Natural Science Foundation of China (NSFC) under grant 61573174, the Spanish Ministerio de Educación project DPI2015-69286-C3-2-R (MINECO/ FEDER), the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656), the AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482), and the Chinese Scholarship Council (CSC) under rant 201808390007.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An Analysis of Multi Objective Energy Scheduling in PV-BESS System under Prediction Uncertainty

  • Nair, Unnikrishnan Raveendran
  • Sandelic, Monika
  • Sangwongwanich, Ariya
  • Dragičević, Tomislav
  • Costa Castelló, Ramon
  • Blaabjerg, Frede
Energy storage systems (ESSs) are being considered to overcome issues in modern grids, caused by increasing penetration of renewable generation. Nevertheless, integration of ESS should also be supplemented with an optimal energy management framework to ensure maximum benefits from ESS. Conventional energy management of battery, used with PV system, maximises self-consumption but does not mitigate grid congestion or address battery degradation. Model predictive control (MPC) can alleviate congestion, degradation while maximizing self-consumption. As such, studies will be carried out, in this work, to highlight the improvement with MPC based energy management over conventional method using simulations of one-year system behaviour. As MPC uses forecast information in decision making, the impact of forecast uncertainties will be assessed and addressing the same through constraint tightening will be presented. It is concluded that MPC provides improvement in system behaviour over multiple performance criteria., This work is done as part of project which has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska Curie grant agreement No 675318 (INCITE). This work was supported in part by the Spanish Ministry of Economy and Competitiveness under Projects CICYT RTI2018-094665-B-I00, DOVELAR ref. RTI2018-096001-B-C32 (MCIU/AEI/FEDER, UE) and Mar´ıa de Maeztu Seal of Excellence to IRI (MDM-2016-0656), and by the Generalitat de Catalunya through the Project 2017 SGR 482
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An integrated software architecture for the pollution-based real-time control of urban drainage systems

  • Romero Ben, Luis
  • Joseph-Duran, Bernat
  • Sun, Congcong
  • Meseguer, Jordi
  • Cembrano, Gabriela
  • Guasch Palma, Ramon
  • Martínez, Montse
  • Puig, Vicenç
This paper presents a complete methodology for the development of an integrated software architecture, which can achieve a closed-loop application between the integrated real-time control (RTC) and a virtual reality simulation for the urban drainage system (UDS). Quality measurements are considered during the simulation and optimization process. Model predictive control (MPC) and rule-based control (RBC) are the two main RTC methods embedded in this architecture. The proposed integration environment allows the different software components to efficiently and effectively communicate and work in a system-wide way, as well as to execute all the necessary steps regarding input parameter management, scenario configuration and results extraction. The proposed approaches are implemented into a pilot based on the Badalona UDS (Spain). Results from different scenarios with individual control approaches and rain episodes are evaluated and discussed., The authors want to thank the Spanish national project DEOCS (DPI2016-76493-C3-3-R) and the European Commission research grant of project LIFE EFFIDRAIN (LIFE14 ENV/ES/000860) for the received support. Besides, the authors are grateful for support from Aigües de Barcelona. This work is also supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A topological extension of movement primitives for curvature modulation and sampling of robot motion

  • Colomé, Adrià
  • Torras, Carme
This paper proposes to enrich robot motion data with trajectory curvature information. To do so, we use an approximate implementation of a topological feature named writhe, which measures the curling of a closed curve around itself, and its analog feature for two closed curves, namely the linking number. Despite these features have been established for closed curves, their definition allows for a discrete calculation that is well-defined for non-closed curves and can thus provide information about how much a robot trajectory is curling around a line in space. Such lines can be predefined by a user, observed by vision or, in our case, inferred as virtual lines in space around which the robot motion is curling. We use these topological features to augment the data of a trajectory encapsulated as a Movement Primitive (MP). We propose a method to determine how many virtual segments best characterize a trajectory and then find such segments. This results in a generative model that permits modulating curvature to generate new samples, while still staying within the dataset distribution and being able to adapt to contextual variables., Thiswork has been carried out within the projectCLOTHILDE (“CLOTH manIpulation Learning from DEmonstrations”) funded by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Advanced Grant agreementNo 741930).Research at IRI is also supported by the Spanish State Research Agency through theMaría de Maeztu Seal of Excellence to IRI MDM-2016-0656.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Are Preferences Useful for Better Assistance?: A Physically Assistive Robotics User Study

  • Canal, Gerard
  • Torras, Carme
  • Alenyà, Guillem
Assistive Robots have an inherent need of adapting to the user they are assisting. This is crucial for the correct development of the task, user safety, and comfort. However, adaptation can be performed in several manners. We believe user preferences are key to this adaptation. In this article, we evaluate the use of preferences for Physically Assistive Robotics tasks in a Human-Robot Interaction user evaluation. Three assistive tasks have been implemented consisting of assisted feeding, shoe-fitting, and jacket dressing, where the robot performs each task in a different manner based on user preferences. We assess the ability of the users to determine which execution of the task used their chosen preferences (if any). The obtained results show that most of the users were able to successfully guess the cases where their preferences were used even when they had not seen the task before. We also observe that their satisfaction with the task increases when the chosen preferences are employed. Finally, we also analyze the user's opinions regarding assistive tasks and preferences, showing promising expectations as to the benefits of adapting the robot behavior to the user through preferences., This work has been supported by the ERC project Clothilde (ERC-2016- ADG-741930), the HuMoUR project (Spanish Ministry of Science and Innovation TIN2017-90086-R) and by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). Gerard Canal has also been supported by the Spanish Ministry of Education, Culture and Sport by the FPU15/00504 doctoral grant and the CHIST-ERA project COHERENT (EPSRC EP/V062506/1).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controller design for polymer electrolyte membrane fuel cell systems for automotive applications

  • Gómez Pomar, Juan Carlos
  • Serra-Prat, María
  • Husar, Attila
Continuous developments in Proton Exchange Membrane Fuel Cells (PEMFC) make them a promising technology to achieve zero emissions in multiple applications including mobility. Incremental advancements in fuel cells materials and manufacture processes make them now suitable for commercialization. However, the complex operation of fuel cell systems in automotive applications has some open issues yet. This work develops and compares three different controllers for PEMFC systems in automotive applications. All the controllers have a cascade control structure, where a generator of setpoints sends references to the subsystems controllers with the objective to maximize operational efficiency. To develop the setpoints generators, two techniques are evaluated: off-line optimization and Model Predictive Control (MPC). With the first technique, the optimal setpoints are given by a map, obtained off-line, of the optimal steady state conditions and corresponding setpoints. With the second technique, the setpoints time profiles that maximize the efficiency in an incoming time horizon are continuously computed. The proposed MPC architecture divides the fast and slow dynamics in order to reduce the computational cost. Two different MPC solutions have been implemented to deal with this fast/slow dynamics separation. After the integration of the setpoints generators with the subsystems controllers, the different control systems are tested and compared using a dynamic detailed model of the automotive system in the INN-BALANCE project running under the New European Driving Cycle., This work was supported in part by the Spanish national project DOVELAR (RTI2018-096001-B-C32, MINECO/FEDER) also in part by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656), and finally in part by the Fuel Cells and Hydrogen 2 Joint Undertaking under Grant INN-BALANCE 735969. This Joint Undertaking receives support from the European Union's Horizon 2020 research and innovation program and Hydrogen Europe and N. ERGHY.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Control-oriented quality modelling approach of sewer networks

  • Sun, Congcong
  • Romero Ben, Luis
  • Joseph-Duran, Bernat
  • Meseguer, Jordi
  • Guasch Palma, Ramon
  • Martínez, Montse
  • Puig, Vicenç
  • Cembrano, Gabriela
A control-oriented quality modeling approach is proposed for sewer networks, which can represent quality dynamics using simple equations in order to optimize pollution load from combined sewer overflows in large scale sewer network in real time. Total suspended solid has been selected as the quality indicator, regarding it is easy to be estimated through measuring turbidity and correlated with other quality indicators. The model equations are independent for different elements in sewer network, which allows a scalable usage. In order to ensure accuracy of the proposed models, a calibration procedure and a sensitivity analysis have been presented using data generated by virtual reality simulation. Afterwards, a quality-based model predictive control has been developed based on the proposed models. To validate effectiveness and efficiency of the modelling and optimization approaches, a pilot case, based on the Badalona sewer network in Spain is used. Application results under different scenarios show that the control-oriented modelling approach works properly to cope with quality dynamics in sewers. The quality-based optimization approach can provide strategies in reducing pollution loads in real time., The authors wish to acknowledge the support from the European Commission research grant of project LIFE EFFIDRAIN (LIFE14 ENV/ES/000860), from Spanish national project DEOCS (DPI2016-76493-C3-3-R) and the internal project TWINs from the CISC (Spanish State Research Agency) through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). The authors also thank Aigües de Barcelona for their financial and technical support. Considering the fact that data, models and tools used in this research are confidential or commercial, we refer other researchers to contact SUEZ Spain Group (for access to detailed, simplified models; the Closed-loop Simulation Framework software; and the rain data) and Innovyze (for licenses to InfoWorks ICM). Also appreciate for the support from NWO (Netherlands Organisation for Scientific Research) Sectorplan for Beta and Technology Programme in Wageningen University
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Detection and Mitigation of False Data in Cooperative DC Microgrids with Unknown Constant Power Loads

  • Cecilia, Andreu
  • Sahoo, Subham
  • Dragičević, Tomislav
  • Costa Castelló, Ramon
  • Blaabjerg, Frede
The rapid development and implementation of distributed control algorithms for dc microgrids has increased the vulnerability of this type of system to false data injection attacks, being one of the most prominent types of cyber attacks. This fact has motivated the development of different false data detection and impact mitigation strategies. A common approach for the detection is based on implementing an observer that can achieve a reliable estimation of the system states. However, approaches available in the literature assume that the underlying microgrid model is linear, which is generally not the case, specially when the dc microgrid supplies nonlinear constant power loads (CPLs). Consequently, this article proposes a distributed nonlinear observer approach that can robustly detect and reconstruct the applied false data attack in the dc microgrid's current sensors and cyber links, even in the presence of local unknown CPLs. First, the system is transformed into an observable form. Second, a high-order sliding-mode observer is implemented to estimate the system states and CPL, even in the presence of false data. Finally, the estimation is used to reconstruct the attack signal. The robustness of the proposed strategy is validated through numerical simulations and in an experimental prototype under measurement noise, uncertainty, and communication delays., This work has been partially funded by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and by the project DOVELAR (ref. RTI2018-096001-B-C32)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Disturbance observer-based LPV feedback control of a N-DoF robotic manipulator including compliance through gain shifting

  • San Miguel, Alberto
  • Puig, Vicenç
  • Alenyà, Guillem
This paper proposes a control scheme for a N-DoF robotic manipulator in a joint-regulation motion problem, dealing with disturbances (as e.g. exogenous forces, unmodelled dynamics) that hinder task fulfilment, and also considering that not all the required states are available online. Existing literature tackles this problem through Disturbance Observer (DO) strategies which imply complex analysis and design methods or introducing strong assumptions. Conversely, we propose to formulate the system as a Linear Parameter Varying (LPV) model, which allows a straightforward application of the existing linear control structures but without neglecting its non-linear behaviour. We make use of the Robust Unknown Input Observer (RUIO) to obtain (for not measurable states) a decoupled estimation from the unknown disturbance effects, and improve its noise reduction capabilities through the new optimal RUIO design. The robotic manipulator is controlled with a state-feedback control law that, making use of the LPV paradigm, has been designed to seamlessly avoid torque saturation on manipulator's joints through a gain shifting strategy that modifies its compliant behaviour. Stability and performance requirements are imposed in both RUIO and state-feedback control synthesis problems stated using the LMI framework, applying Polya's theorems on positive forms of the standard simplex to reduce its overall conservatism. Experiments, using a simulated head system of the TIAGo robot as a testbed in various realistic scenarios, show the benefits when compared to the existing joint-independent PD control strategy and state-of-art EKF disturbance estimation., This work is supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI MDM-2016-0656.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Grid Congestion Mitigation and Battery Degradation Minimisation Using Model Predictive Control in PV-Based Microgrid

  • Nair, Unnikrishnan Raveendran
  • Sandelic, Monika
  • Sangwongwanich, Ariya
  • Dragičević, Tomislav
  • Costa Castelló, Ramon
  • Blaabjerg, Frede
Increasing integration of photovoltaic (PV) system in electric grids cause congestion during peak power feed-in. Battery storage in PV systems increases self-consumption, for consumer's benefit. However with conventional maximising self consumption (MSC) control for battery scheduling, the issue of grid congestion is not addressed. The batteries tend to be fully charged early in the day and peak power is still fed-in to grid. This also increases battery degradation due to increased dwell time at high state of charge (SOC) levels. To address this issue, this work uses a model predictive control (MPC) for scheduling in PV system with battery storage to achieve multiple objectives of minimising battery degradation, grid congestion, while maximising self consumption. In order to demonstrate the improvement, this work compares the performances of MPC and MSC schemes when used in battery scheduling. The improvement is quantified through performance indices like self consumption ratio, peak power reduction and battery capacity fade for one-year operation. An analysis on computation burden and maximum deterioration in MPC performance under prediction error is also carried out. It is concluded that, compared to MSC, MPC achieves similar self consumption in PV systems while also reducing grid congestion and battery degradation., This work is done as part of project which has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sk lodowska Curie grant agreement No 675318 (INCITE). This work is supported by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work has been partially funded by the Spanish national project DOVELAR ref. RTI2018-096001-B-C32 (MCIU/AEI/FEDER, UE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Industrial robots fuel cell based hybrid power-trains: A comparison between different configurations

  • Ramos, German A.
  • Montobbio de Pérez-Cabrero, Tomàs
  • Domènech, Carles
  • Costa Castelló, Ramon
Electric vehicles are becoming more and more popular. One of the most promising possible solutions is one where a hybrid powertrain made up of a FC (Fuel Cell) and a battery is used. This type of vehicle offers great autonomy and high recharging speed, which makes them ideal for many industrial applications. In this work, three ways to build a hybrid power-train are presented and compared. To illustrate this, the case of an industrial robot designed to move loads within a fully automated factory is used. The analysis and comparison are carried out through different objective criteria that indicate the power-train performance in different battery charge levels. The hybrid configurations are tested using real power profiles of the industrial robot. Finally, simulation results show the performance of each hybrid configuration in terms of hydrogen consumption, battery and FC degradation, and dc bus voltage and current regulation., This research was supported by the María de Maeztu Seal of Excellence to IRI (ref. MDM- 2016-0656) and the Spanish Ministry of Economy and Competitiveness under Project DOVELAR (ref. RTI2018-096001-B-C32).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mobile Manipulation Hackathon: Moving into Real World Applications

  • Roa, Máximo A.
  • Dogar, Mehmet
  • Pagès, Jordi
  • Vivas, Carlos
  • Morales, Antonio
  • Correll, Nikolaus
  • Gorner, Michael
  • Rosell, Jan
  • Foix, Sergi
  • Memmesheimer, Raphael
  • Ferro, Francesco
The Mobile Manipulation Hackathon was held in late 2018 during the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) to showcase the latest applications of wheeled robotic manipulators. The challenge had an open format, where teams developed an application using simulation tools and integrated it into a robotic platform. This article presents the competition and analyzes the results, with information gathered during the event and from a survey circulated among the finalist teams. We provide an overview of the mobile manipulation field, identify key areas required for further development to facilitate the implementation of mobile manipulators in real applications, and discuss ideas about how to structure future hackathon-style competitions to enhance their impact on the scientific and industrial communities., M. Dogar received funding from the UK Engineering and Physical Sciences Research Council under grant EP/P019560/1. A. Morales and the UJI Robotic Intelligence Laboratory are partially funded by Ministerio de Econom´ıa y Competitividad (DPI2017-89910-R) and by Generalitat Valenciana (PROMETEO/2020/034). The work developed by team IOC-AUDECO was partially supported by the Spanish Government through the project DPI2016-80077-R. Team IRI was supported by the European Research Council (ERC) from the European Union H2020 Programme under grant 741930 (CLOTHILDE: CLOTH manIpulation Learning from DEmonstrations), and the Spanish State Research Agency through the Mar´ıa de Maeztu Seal of Excellence to IRI (MDM-2016-0656). Team TAMS was partially funded by the German Research Foundation (DFG) and the National Science Foundation of China in project Crossmodal Learning, TRR-169.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nonlinear adaptive observation of the liquid water saturation in polymer electrolyte membrane fuel cells

  • Cecilia, Andreu
  • Serra-Prat, María
  • Costa Castelló, Ramon
Efficiency, reliability and lifetime of polymer electrolyte membrane fuel cells (PEMFCs) are significantly limited by inadequate water management. High-performance water active control algorithms cannot be implemented due to the absence of adequate online sensors that can measure the internal liquid water saturation. A promising technique that can be applied in this context is the state observer. However, fuel cell models present strong nonlinearities, model uncertainty, unmatched unknown parameters and sensor noise, which are major difficulties in observer design. The algorithm proposed in this work is based on a time-varying adaptive observer, that offers an estimation of the liquid water state and behaviour in the cathode catalyst layer of a PEMFC, coupled with a low-power peaking-free observer with dynamic dead-zone filtering that is used as a high-performance soft sensor. The algorithm is shown to provide an accurate estimation of the liquid water saturation and the liquid water transport parameters even in the presence of sensor noise and model inaccuracies. The results are validated through numerical simulations and in a real experimental prototype., This work has been partially funded by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and by the project DOVELAR (ref. RTI2018-096001-B-C32).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Task-adaptive robot learning from demonstration with gaussian process models under replication

  • Arduengo, Miguel
  • Colomé, Adrià
  • Borràs, Julia
  • Sentis, Luis
  • Torras, Carme
Learning from Demonstration (LfD) is a paradigm that allows robots to learn complex manipulation tasks that can not be easily scripted, but can be demonstrated by a human teacher. One of the challenges of LfD is to enable robots to acquire skills that can be adapted to different scenarios. In this letter, we propose to achieve this by exploiting the variations in the demonstrations to retrieve an adaptive and robust policy, using Gaussian Process (GP) models. Adaptability is enhanced by incorporating task parameters into the model, which encode different specifications within the same task. With our formulation, these parameters can be either real, integer, or categorical. Furthermore, we propose a GP design that exploits the structure of replications, i.e., repeated demonstrations with identical conditions within data. Our method significantly reduces the computational cost of model fitting in complex tasks, where replications are essential to obtain a robust model. We illustrate our approach through several experiments on a handwritten letter demonstration dataset., This work has been partially funded by the European Union Horizon 2020 Programme under grant agreement no. 741930 (CLOTHILDE) and by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI [MDM-2016-0656].
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The ethical issues of social assistive robotics: A critical literature review

  • Pareto Boada, Júlia
  • Román Maestre, Begoña
  • Torras, Carme
Along with its potential contributions to the practice of care, social assistive robotics raises significant ethical issues. The growing development of this technoscientific field of intelligent robotics has thus triggered a widespread proliferation of ethical attention towards its disruptive potential. However, the current landscape of ethical debate is fragmented and conceptually disordered, endangering ethics’ practical strength for normatively addressing these challenges. This paper presents a critical literature review of the ethical issues of social assistive robotics, which provides a comprehensive and intelligible overview of the current ethical approach to this technoscientific field. On the one hand, ethical issues have been identified, quantitatively analyzed and categorized in three main thematic groups. Namely: Well-being, Care, and Justice. On the other hand –and on the basis of some significant disclosed tendencies of the current approach–, future lines of research and issues regarding the enrichment of the ethical gaze on social assistive robotics have been identified and outlined., This work has been partially supported by the Spanish Ministry of Science and Innovation under a FPI scholarship for predoctoral contracts for the training of doctors (PRE2018-084286), and by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656).