Pasar al contenido principal

MICROGELES BIOMIMETICOS PARA EL ESTUDIO DE LA GENERACION DE RESISTENCIAS A FARMACOS EN EL MIELOMA MULTIPLE.

PID2019-106099RB-C41

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adipose tissue derived stromal cells in a gelatin-based 3D matrix with exclusive ascorbic acid signalling emerged as a novel neural tissue engineering construct: an innovative prototype for soft tissue

  • Martin, Catherine Ann
  • Radhakrishnan, Subathra
  • Trentz, Omana Anna
  • Nivethaa, E.A.K.
  • Reddy, Mettu Srinivas
  • Rela, Mohamed
  • Subbaraya, Narayana Kalkura
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] The current study investigated a triad, which comprises of adipose tissue derived stem cells isolated from infrapatellar fat pad and gelatin/polyvinyl alcohol (PVA)-based matrix with exclusive ascorbic acid signalling. Though, the bio-mechanical properties of the gelatin-PVA blended scaffolds in wet condition are equivalent to the ECM of soft tissues in general, in this study, the triad was tested as a model for neural tissue engineering. Apart from being cytocompatible and biocompatible, the porosity of the scaffold has been designed in such a manner that it facilitates the cell signalling and enables the exchange of nutrients and gases. The highly proliferative stem cells from Passage 2 were characterized using both, mesenchymal and embryonic stem cell markers. As an initial exploration the mesenchymal stem cells at Passage 4 were exposed to ascorbic acid and basic fibroblast growth factor signalling for neuronal differentiation in 2D environment independently. The MSCs successfully differentiated and acquired neuron specific markers related to cytoskeleton and synapses. Subsequently, three phases of experiments have been conducted on the 3D gelatin/PVA matrix to prove their efficacy, the growth of stem cells, growth of differentiated neurons and the in situ growth and differentiation of MSCs. The scaffold was conducive and directed MSCs to neuronal lineage under specific signalling. Overall, this organotypic model triad could open a new avenue in the field of soft tissue engineering as a simple and effective tissue construct., The authors thank National Foundation for Liver Research (NFLR) for financially supporting the cell-based work in this project. CIBER-BBN is an initiative funded by the VI National R&D & I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. One of the authors (N.K.S.) thanks the University Grants Commission, India for the award of the Basic Scientific Research (UGC-BSR) Faculty Fellowship [No. F.4-5(11)2019 (BSR)].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mechanical, structural, and biological evaluation of multilayer HA-Ag/ TiO2/TiN/Ti coatings on Ti6Al4V obtained by magnetron sputtering for implant applications

  • Lenis, J.A.
  • Contreras Romero, Elbert
  • Hurtado Macías, Abel
  • Pacha-Olivenza, M.A.
  • González-Martín, M.L.
  • Bolívar, F.J.
  • Rico Tortosa, Patricia María
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] In the present work the surface of Ti6Al4V alloy, widely used for the fabrication of implants, was modified by incorporating a novel biocompatible and antibacterial coating composed of multiple layers of hydroxyapatite (HA) and Ag deposited on a TiO2/TiN/Ti trilayer. During the characterization of the coatings, their chemical and phase compositions were evaluated by energy dispersive X-ray spectroscopy and X-ray diffraction. Structural, topographical, and morphological studies were performed by focused ion beam, field emission scanning electron microscopy, transmission electron microscopy and atomic force microscopy. Mechanical properties were determined by nano indentation and micro scratch test. Finally, the in vitro biological response was evaluated by cell viability tests with mouse mesenchymal stem cells, while bacterial viability was evaluated with Staphylo-coccus aureus strain. The results obtained show great chemical and compositional control, identifying HA (Ca/P close to 1.67) and anatase phases for TiO2. Additionally, an architecture composed of nanometric layers forming a HA-Ag/TiO2/TiN/Ti coating with granular morphology was obtained. The incorporation of multiple Ag layers in the HA structure led to a decrease of about 44 % in its hardness, obtaining values of up to 6.3 GPa. Meanwhile, there was a relief in the residual stresses of >50 %, which generated increases of up to 74 % in the adhesion of the coatings to the substrate The biological tests showed that biocompatible coatings with high antibacterial potential were obtained., We thank the University of Antioquia, the Centro de Investigacion, Innovacion y Desarrollo de materiales (CIDEMAT) group, the Departamento Administrativo de Ciencia, Tecnologia e Innovacion (COLCIENCIAS) for financing the Project 15-1696, the scholarship program of Enlazamundos, the Agencia de Educacion Superior de Medellin (Sapiencia). The experimental work performed at the CBIT was funded by the Spanish State Research Agency (AEI) through the PID2019-106099RBC41/AEI/10.13039/501100011033 and RTI2018-096794-B-I00 projects. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions were financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The Microscopy Service of the UPV (Universitat Politècnica de València) is gratefully acknowledged. The authors are grateful to Junta de Extremadura and FEDER for grants GR18153 and IB20092. The project RTI2018-096862B-I00, supported by MCIN/AEI/10.13039/501100011033/and by FEDER "Una manera de hacer Europa", is also highly appreciated.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Novel microgel culture system as semi-solid three-dimensional in vitro model for the study of multiple myeloma proliferation and drug resistance

  • Clara-Trujillo, Sandra|||0000-0002-6455-2993
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Tolosa, Laia
  • Cordón, Lourdes
  • Sempere, Amparo
[EN] Multiple myeloma (MM) is a hematological malignancy in which the patient's drug resistance is one of the main clinical problems. As 2D cultures do not recapitulate the cellular microenvironment, which has a key role in drug resistance, there is an urgent need for better biomimetic models. Here, a novel 3D platform is used to model MM. The semi-solid culture consists of a dynamic suspension of microspheres and MM cells, termed as microgel. Microspheres are synthesized with acrylic polymers of different sizes, compositions, and functionalities (fibronectin or hyaluronic acid). Optimal conditions for the platform in terms of agitation speed and microsphere size have been determined. With these parameters the system allows good proliferation of the MM cell lines RPMI8226, U226, and MM1.S. Interestingly, when used for drug resistance studies, culture of the three MM cell lines in microgels showed close agreement in revealing the role of acrylic acid in resistance to anti-MM drugs such as dexamethasone and bortezomib. This work presents a unique platform for the in vitro modeling of non-solid tumors since it allows keeping non-adherent cells in suspension conditions but in a 3D context that can be easily tuned with different functionalizations., This work was funded by the Spanish State Research Agency (AEI) through the PID2019-106099RB-C41/AEI/10.13039/501100011033 Project. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions were financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. This work was also supported by the Spanish Ministry of Science, Innovation and Universities through Grant NO FPU17/05810 awarded to Sandra Clara-Trujillo. The Microscopy Service of the UPV (UniversitatPolitecnica de València) is gratefully acknowledged for helping with FESEM characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Co-culture of multiple myeloma cell lines and bone marrow mesenchymal stem cells in a 3D microgel environment

  • García-Briega, María Inmaculada|||0000-0003-0811-2632
  • Plá-Salom, Júlia
  • Clara-Trujillo, Sandra|||0000-0002-6455-2993
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Tolosa, Laia
  • Cordón, Lourdes
  • Sempere, Amparo
[EN] This study reproduces the complex relationships between tumour plasma cells and their bone marrow microenvironment in multiple myeloma in vitro. These relationships are established both with other cells and with the extracellular matrix and are key factors in tumour progression, generating resistance to antitumour drugs in the cellular and non-cellular environments. This paper proposes a 3D microenvironment model designed to capture the main components of the multiple myeloma tumour microenvironment. Multiple myeloma cells (MMCs) were dispersed in a microgel medium formed by gel-textured microspheres. The proteins and polysaccharides considered important in the interaction of the MMCs with their non-cellular environment were successfully grafted onto the surface of the microspheres, while human mesenchymal stem cells (MSCs) were cultured in a pellet with non-functionalised microspheres. The MSCs pellet was placed in the well plate together with the microgel and the MMCs and orbitally shaken to maintain them in suspension. The viability, cell cycle and proliferation of the RPMI8226, MM1S and U266 multiple myeloma cell lines and the direct adhesion of MMCs to the MSC pellet were quantified. The results revealed that all three cell lines are able to grow satisfactorily. In addition, the normal behaviour of the MMCs is not modified in any of the culture conditions studied., This research was funded by MCIN/AEI/10.13039/501100011033 Grant PID2019-106099RB-C41. The research was also supported by CIBER - Consorcio Centro de Investigacion Biomedica en Red - CIBER_BBN CB06/01/1026, CIBERONC CB16/12/00284, Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion. This work was also supported by the Spanish Ministry of Science, Innovation and Universities through Grant No PRE2020-092326 awarded to M <feminine ordinal indicator> Inmaculada Garcia-Briega. This work was also supported by the Spanish Ministry of Science, Innovation and Universities through Grant No PRE2022-000080 awarded to Julia PlaSalom. The authors also thank the microscopy department of the Universitat Politecnica de Valencia for their help and support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design and characterization of microspheres for a 3D mesenchymal stem cell culture

  • Lastra, María Laura
  • Cortizo, Ana María
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Recent studies have shown the relevance of growing mesenchymal stem cells (MSCs) in three-dimensional environments with respect to the monolayer cell culture on an adherent substrate. In this sense, macroporous scaffolds and hydrogels have been used as three-dimensional (3D) supports. In this work, we explored the culture of MSCs in a 3D environment created by microspheres, prepared with a fumarate-vinyl acetate copolymer and chitosan. In this system, the environment that the cells feel has similarities to that found by the cells encapsulated in a hydrogel, but the cells have the ability to reorganize their environment since the microspheres are mobile. We evaluated their biocompatibility in vitro using RAW 264.7 macrophages and bone marrow mesenchymal stem cells (BMSCs). The results with RAW 264.7 cells showed good cell viability, without evident signs of cytotoxicity. BMSCs not only proliferate, but also rearrange to grow in clusters, thus highlighting the advantages of microspheres as 3D environments., This work supported by Universidad Nacional de La Plata (11/X 768 and subsidio Jovenes Investigadores 2017), Comision de Investigaciones Cientificas de la Provincia de Buenos Aires. In addition, financial support from the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project PID2019-106099RB-C41/AEI/10.13039/501100011033 is acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. MLL is a Posdoctoral Fellow of CONICET, AMC is a member of Carrera del Investigador Cientifico de la CICPBA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Viscoelastic Properties of Acellular Matrices of Porcine Esophageal Mucosa and Comparison with Acellular Matrices of Porcine Small Intestine Submucosa and Bovine Pericardium

  • Estrada Mira, Sergio
  • Restrepo Munera, Luz M.
  • García-Briega, María Inmaculada|||0000-0003-0811-2632
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] The aim of this study was to compare the viscoelastic properties of a decellularized mesh from the porcine esophagus, prepared by our group, with two commercial acellular tissues derived from porcine small intestine submucosa and bovine pericardium for use in medical devices. The tissues' viscoelastic properties were characterized by creep tests in tension, applying the load in the direction of the fibers or the transverse direction, and also by dynamic-shear mechanical tests between parallel plates or in tension at frequencies between 0.1 and 35 Hz. All the tests were performed in triplicate at a constant temperature of 37 degrees C immersed in distilled water. The tissues' surface and cross-sectional microstructure were observed by scanning electron microscopy (SEM) to characterize the orientation of the fibers. The matrices of the porcine esophagus present an elastic modulus in the order of 60 MPa when loaded in the longitudinal direction while those of the porcine intestine submucosa and bovine pericardium have an elastic modulus below 5 MPa. Nevertheless, the shear modulus of bovine pericardium nearly triplicates that of the esophageal matrix. The viscoelasticity of decellularized esophageal mucosa is characterized by a fast change in the creep compliance with time. The slope of the creep curve in the double logarithmic plot is twice that of the control samples. These results are consistent with the microstructure observed under electron microscopy regarding the orientation of the fibers that make up the matrices., This research was funded by MCIN/AEI/10.13039/501100011033 Grant PID2019-106099RB-C41 and CIBER-Consorcio Centro de Investigacion Biomedica en Red-CB06/01/1026, Instituto de Salud Carlos III (J.L.G.R.) The research was also supported by the University of Antioquia, Project CODI 2015-1096; Sistema General de Regalias, Convocatoria 2012, Macroproyecto Salud, Subproyectonumero 11 and Proyecto Minciencias, Codigo: 430780763747; Contrato: 814-2018.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Segmented Polyurethanes Based on Adipate and Sebacate Biodegradable Polyesters for Use as Nerve Guide Conduits in Peripheral Nerve Regeneration

  • Sabido-Barahona, Alexis B.
  • Vargas-Coronado, Rossana F.
  • Hernández-Sánchez, Fernando
  • Martínez-Richa, Antonio
  • Cauich-Rodríguez, Juan V.
  • Marcos-Fernández, Angel
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] This study investigated the chemical, thermal, and mechanical properties of segmented polyurethanes (SPUs) synthesized using less common biodegradable polyester polyols, specifically poly(adipate) (PAD) and poly(sebacate) (PSC), to evaluate their potential as nerve guidance conduits (NGCs) in peripheral nerve regeneration. The synthesis of novel 4,4 ' methylene-bis-cyclohexyl diisocyanate (HMDI) SPUs was conducted in a two-step process: prepolymer formation and chain extension with 1,4-butanediol (BO) or 1,4-butanediamine (BA). SPUs were synthesized with two molar ratios-polyol:HMDI:BA/BO at 1:2:1 and 1:3:2 for the PAD:HMDI:BA system-to optimize mechanical properties. 1HRMN analysis verified the expected chemical structure of SPUs, whereas Raman and IR spectroscopy confirmed successful polyurethane synthesis. X-ray diffractograms showed that PAD-based SPUs (SPUPAD) were amorphous while PSC-based SPUs (SPUPSC) exhibited semi-crystalline behavior. SPUPAD showed only one degradation stage by TGA, while DSC showed one thermal event. In contrast, SPUPSC exhibited two degradation stages and three thermal events that confirmed phase separation. The longitudinal tensile properties of an NGC fabricated from SPUA-PAD-2 (PAD:HMDI:BA (1:3:2)) after 30 days of immersion in water (25 degrees C) showed a lower modulus (4.46 +/- 0.5 MPa) than native intact nerves (15.87 +/- 2.21 MPa) but a similar modulus to extracted nerves (8.19 +/- 7.27 MPa). This system exhibited a longitudinal tensile force of 11.1 +/- 1.6 N, which is lower than that of peripheral nerves (19.85 +/- 7.21 N) but higher than that of commercial collagen-based nerve guide conduits (6.89 +/- 2.6 N). The observed properties suggest that PUA-PAD-2 has potential as a biomaterial for nerve regeneration applications., This work was supported by the Consejo Nacional de Ciencia y Tecnologia (CONACYT) Mexico (Project 1360 and 248378), and by Ministerio de Ciencia, Innovacion y Universidades, Spain (MCIN/AEI /10.13039/501100011033, Grants PID2023-147542OB-I00 and PID2019-106099RB-C41). The authors gratefully acknowledge Patricia Quintana, Daniel Aguilar Treviño, Wilian Cauich, and Santiago González for the XRD, XPS and DSC experiments at Laboratorio Nacional de Nano y Biomateriales (LANNBIO) Cinvestav-IPN, Unidad Mérida (Project 322758). J.L.G.-R. acknowledges the support provided by CIBER Consorcio Centro de Investigación Biomédica en Red CIBER_BBN CB06/01/1026, Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Determination of synergistic effect between roughness and surface chemistry on cell adhesion of a multilayer Si- Hydroxyapatite coating on Ti6Al4V obtained by magnetron sputtering

  • Pérez Zapata, K.
  • Lenis, J.A.
  • Bolívar, F.J.
  • Rico Tortosa, Patricia María
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Ti alloys are widely used in the biomedical field because they have an adequate balance between mechanical properties, corrosion resistance and biocompatibility. However, when this material is incorporated in the human body, unfavorable reactions can be obtained which do not allow a good osseointegration due to the formation of a fibrous and non-adherent layer between the biomaterial and the bone, which can lead to failure or rejection of the implant. In this study, the influence of surface modification of Ti6Al4V alloy with a hydroxyapatite (HA) and silicon (Si) coating on its biological response in vitro was evaluated. The deposition process was performed by sputtering on two Ti6Al4V surfaces with different root mean square roughness values, the first one with 3.8 nm and the second one with 48.7 nm. The surface morphology of the coatings was observed by Scanning Electron Microscopy and Atomic Force Microscopy, the chemical composition was evaluated by X-ray Energy Dispersive Spectrometry and micro-Raman Spectroscopy. The in vitro biological response of the coatings was evaluated by cell metabolic activity assay and cell adhesion tests, using mouse mesenchymal stem cells. The control of the process parameters allowed obtaining a multilayer HA-Si coating with good compositional balance (Ca/P ratio very close to 1.67 and characteristic vibrations of the HA phase). Roughness values of 27 +/- 5 nm and 52 +/- 6 nm were obtained for the multilayer coatings obtained on Ti6Al4V (smooth surface) and Ti6Al4V (rough surface), respectively. Biological assays indicated a potentially non-toxic character of the coatings, moreover, the cell adhesion of Ti6Al4V was favored both by the incorporation of the HA-Si multilayer coating and by the increase in the roughness of the substrate., We thank the University of Antioquia, the Centro de Investigacion, Innovacion y Desarrollo de materiales (CIDEMAT) group, the Departamento Administrativo de Ciencia, Tecnologia e Innovacion (COLCIEN-CIAS) for financing the Project 15-1696, the scholarship program of Enlazamundos, the Agencia de Educacion Superior de Medellin (Sapiencia), JLGR acknowledges financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) through the project MAT2016-76039-C4-1-R and MAT 2015-63974-C4-3-R (AEI/FEDER, UE) (including the FEDER financial support). PR acknowledges support from the Spanish Ministry of Science, Innovation and Universities (RTI2018-096794), and Fondo Europeo de Desarrollo Regional (FEDER). CIBER-BBN is an initiative funded by the VI National R & D & I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effective elastin-like recombinamers coating on poly(vinylidene) fluoride membranes for mesenchymal stem cell culture

  • Guillot-Ferriols, María Teresa
  • del Barrio, Ana
  • Costa, Carlos M.
  • Lanceros-Méndez, Senentxu
  • Rodríguez-Cabello, José Carlos
  • Santos, Mercedes
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Bone's inherent piezoelectricity is a key factor in regulating bone growth and mesenchymal stem cells (MSCs) fate towards the osteogenic lineage. The piezoelectric polymer poly(vinylidene) fluoride (PVDF) was thus used to manufacture electroactive membranes by means of non-solvent induced phase separation (NIPS), producing porous membranes with approximately 90% of gamma-phase for MSCs culture. The combination of the porous surface and PVDF hydrophobicity hinders cell adhesion and requires a coating to improve cell culture conditions. A layer-by-layer (LbL) method was used to deposit elastin-like recombinamers (ELRs) containing RGD sequences applying click cross-linking chemistry. ELRs potential was confirmed by comparing traditional fibronectin adsorption with ELRs LbL on PVDF electroactive membranes. Porcine bone marrow MSCs preferred ELRs-coated surfaces, which enhanced initial cell adhesion and improved proliferation after 7 days. These findings lead to new possibilities for regenerative therapies in the area of bone tissue engineering, offering the advantages of MSC commitment towards the osteogenic lineage by applying electro-mechanical stimulation on electroactive substrates., This work was supported by the Spanish State Research Agency (AEI) through Projects PID2019-106000RB-C21/AEI/10.13039/501100011033 and PID2019-106099RB-C43/AEI/10.13039/501100011033 (including FEDER funds). Maria Guillot-Ferriols received government funding for her doctoral thesis [grant number BES-2017-080398FPI]. The CIBER-BBN initiative is funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The authors are grateful for the funding from the Spanish Government (MAT2016-78903-R, RTI2018-096320-B-C22), Junta de Castilla y Leon (VA317P18), Interreg V Espana Portugal POCTEP (0624_2IQBIONEURO_6_E) and Centro en Red de Medicina Regenerativa y Terapia Celular de Castilla y Leon. This work was also supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding UID/FIS/04650/2020. The authors thank FCT and FEDER funds (COMPETE 2020) under projects PTDC/BTM-MAT/28237/2017, PTDC/EMD-EMD/28159/2017 and PTDC/FIS-MAC/28157/2017. Carlos M. Costa is grateful to the FCT [grant number FRH/BPD/112547/2015]. Financial support was also received from the Basque Government under the ELKARTEK, HAZITEK and PIBA (PIBA-2018-06) programs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Covalent functionalization of decellularized tissues accelerates endothelialization

  • Dal Sasso, Eleonora
  • Zamuner, Annj
  • Filippi, Andrea
  • Romanato, Filippo
  • Palmosi, Tiziana
  • Vedovelli, Luca
  • Gregori, Dario
  • Russo, Teresa
  • Gloria, Antonio
  • Iop, Laura
  • Gerosa, Gino
  • Dettin, Monica
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] In the field of tissue regeneration, the lack of a stable endothelial lining may affect the hemocompatibility of both synthetic and biological replacements. These drawbacks might be prevented by specific biomaterial functionalization to induce selective endothelial cell (EC) adhesion. Decellularized bovine pericardia and porcine aortas were selectively functionalized with a REDV tetrapeptide at 10(-5) M and 10(-6) M working concentrations. The scaffold-bound peptide was quantified and REDV potential EC adhesion enhancement was evaluated in vitro by static seeding of human umbilical vein ECs. The viable cells and MTS production were statistically higher in functionalized tissues than in control. Scaffold histoarchitecture, geometrical features, and mechanical properties were unaffected by peptide anchoring. The selective immobilization of REDV was effective in accelerating ECs adhesion while promoting proliferation in functionalized decellularized tissues intended for blood-contacting applications., JLGR acknowledges financial support from the Spanish State Research Agency (AEI) through the PID2019-106099RB-C41/AEI/10.13039/501100011033 project. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stability of Biomimetically Functionalised Alginate Microspheres as 3D Support in Cell Cultures

  • García-Briega, María Inmaculada|||0000-0003-0811-2632
  • Ródenas Rochina, Joaquín|||0000-0001-5764-207X
  • Ribeiro-Martins, Luis Amaro|||0000-0001-8648-6459
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Lanceros-Méndez, Senentxu
  • Sempere, Amparo
[EN] Alginate hydrogels can be used to develop a three-dimensional environment in which various cell types can be grown. Cross-linking the alginate chains using reversible ionic bonds opens up great possibilities for the encapsulation and subsequent release of cells or drugs. However, alginate also has a drawback in that its structure is not very stable in a culture medium with cellular activity. This work explored the stability of alginate microspheres functionalised by grafting specific biomolecules onto their surface to form microgels in which biomimetic microspheres surrounded the cells in the culture, reproducing the natural microenvironment. A study was made of the stability of the microgel in different typical culture media and the formation of polyelectrolyte multilayers containing polylysine and heparin. Multiple myeloma cell proliferation in the culture was tested in a bioreactor under gentle agitation., This work was funded by the Spanish State Research Agency (AEI) through the PID2019-106099RB-C41/AEI/10.13039/501100011033 and PID2019-106099RB-C43/AEI/10.13039/501100011033 Projects. This work was also supported by the Spanish Ministry of Science, Innovation and Universities through Grant No PRE2020-092326 awarded to Ma Inmaculada Garcia-Briega. Funding from the Basque Government Industry Departments under the ELKARTEK program is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of the Inclusion of Propylene Carbonate Electrolyte Solvent on the Microstructure and Thermal and Mechanical Stability of Poly(l-lactic acid) and Poly(vinylidene fluoride-co-hexafluoropropylene) Battery Separator Membranes

  • Ribeiro-Martins, Luis Amaro|||0000-0001-8648-6459
  • Teruel Biosca, Laura|||0000-0002-0943-9031
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Tort-Ausina, Isabel|||0000-0002-1900-914X
  • Serra, J. P.
  • Correia, Daniela M.
  • Costa, Carlos M.
  • Lanceros-Méndez, Senentxu
[EN] The influence ofthe inclusion of the organic solvent propylenecarbonate (PC) in microporous membranes based on poly-(l-lacticacid) (PLLA) and poly-(vinylidene fluoride-co-hexafluoropropylene)P-(VDF-HFP) has been studied based on its relevance for the applicationof those separator membranes in lithium-ion batteries. The membraneshave been produced through solvent casting and characterized withrespect to the swelling ratio originated by the uptake of the organicsolvent. The organic solvent uptake affects the porous microstructureand crystalline phase of both membrane types. The organic solventuptake amount affects the crystal size of the membranes as a consequenceof the interaction between the solvent and the polymer, since thepresence of the solvent modifies the melting process of the polymercrystals due to a freezing temperature depression effect. It is alsoshown that the organic solvent partially penetrates into the amorphousphase of the polymer, leading to a mechanical plasticizing effect.Thus, the interaction between the organic solvent and the porous membraneis essential to properly tailor membrane properties, which in turnwill affect lithium-ion battery performance., The authors thank the Fundacao para a Ciencia e Tecnologia (FCT) for financial support under the framework of Strategic Funding UIDB/04650/2020, UID/FIS/04650/2020, UID/EEA/04436/2020, and UID/QUI/0686/2020 and under projects, MIT-EXPL/TDI/0033/2021, 2022.03931.PTDC, and POCI-01-0247-FEDER-046985 funded by national funds through FCT and by the ERDF through the COMPETE2020-Programa Operacional Competitividade e Internacionalizacao (POCI). The authors also thank the FCT for financial support under grant 2021.08158.BD (J.P.S.), and FCT investigator contracts 2020.02915.CEECIND (D.M.C.) and 2020.04028.CEECIND (C.M.C.). This study forms part of the Advanced Materials program and was supported by MCIN with funding from European Union Next GenerationEU (PRTR-C17.I1) and by the Basque Government under the IKUR and Elkartek programs. The authors thank for technical and human support provided by SGIker (UPV/EHU/ERDF, EU). The work of the Spanish teams was funded by MCIN/AEI/10.13039/501100011033 Grants PID2019-106099RB-C41 and -C43. CIBER de Bioingenieria, Biomateriales y Nanomedicina is an initiative funded by the VI National R & D & I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions were financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The Microscopy Service of the Universitat Polite`cnica de Vale`ncia is gratefully acknowledged for helping with FESEM characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Magnetically Activated Piezoelectric 3D Platform Based on Poly(Vinylidene) Fluoride Microspheres for Osteogenic Differentiation of Mesenchymal Stem Cells

  • Guillot-Ferriols, María Teresa
  • Tolosa, Laia
  • Costa, Carlos M.
  • Lanceros-Méndez, Senentxu
  • García-Briega, María Inmaculada|||0000-0003-0811-2632
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Mesenchymal stem cells (MSCs) osteogenic commitment before injection enhances bone regeneration therapy results. Piezoelectric stimulation may be an effective cue to promote MSCs pre-differentiation, and poly(vinylidene) fluoride (PVDF) cell culture supports, when combined with CoFe2O4 (CFO), offer a wireless in vitro stimulation strategy. Under an external magnetic field, CFO shift and magnetostriction deform the polymer matrix varying the polymer surface charge due to the piezoelectric effect. To test the effect of piezoelectric stimulation on MSCs, our approach is based on a gelatin hydrogel with embedded MSCs and PVDF-CFO electroactive microspheres. Microspheres were produced by electrospray technique, favouring CFO incorporation, crystallisation in beta-phase (85%) and a crystallinity degree of around 55%. The absence of cytotoxicity of the 3D construct was confirmed 24 h after cell encapsulation. Cells were viable, evenly distributed in the hydrogel matrix and surrounded by microspheres, allowing local stimulation. Hydrogels were stimulated using a magnetic bioreactor, and no significant changes were observed in MSCs proliferation in the short or long term. Nevertheless, piezoelectric stimulation upregulated RUNX2 expression after 7 days, indicating the activation of the osteogenic differentiation pathway. These results open the door for optimising a stimulation protocol allowing the application of the magnetically activated 3D electroactive cell culture support for MSCs pre-differentiation before transplantation., This research was funded by Spanish State Research Agency (AEI), G.G.F. acknowledges the support of the PID2019-106000RB-C21/AEI/10.13039/501100011033 project, J.L.G.R. and S.L.-M. acknowledge the support of the PID2019-106099RB-C41 and -C43/AEI/10.13039/501100011033 projects. The CIBER-BBN initiative is funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development. M.G.-F. received government funding for her doctoral thesis, grant number BES-2017-080398. The authors thank FCT (Fundacao para a Ciencia e a Tecnologia) for financial support under the framework of Strategic Funding grant number UID/FIS/04650/2021, projects PTDC/FIS-MAC/28157/2017 and POCI-01-0145-FEDER-007688, and contract under the Stimulus of Scientific Employment, Individual Support 2020.04028 CEECIND (C.M.C.).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Crystallization Monitoring of Semicrystalline Poly(vinylidene fluoride)/1-Ethyl-3-methylimidazolium Hexafluorophosphate [Emim][PF6] Ionic Liquid Blends

  • Correia, Daniela M.
  • Costa, Carlos M.
  • Krakovsky, Ivan
  • Lanceros-Méndez, Senentxu
  • Rodriguez-Hernandez, Jose-Carlos|||0000-0002-1735-824X
  • Tort-Ausina, Isabel|||0000-0002-1900-914X
  • Teruel Biosca, Laura|||0000-0002-0943-9031
  • Torregrosa Cabanilles, Constantino|||0000-0002-2786-3549
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] The electroactive characteristics of poly(vinylidene fluoride) (PVDF) are widely and increasingly being used in technological applications, where controlling the crystallization of the PVDF is of utmost importance. The nucleation and growth of crystals in the beta or. electroactive phases, or in the nonelectroactive a phase, depends on a number of factors that, despite the studies carried out, are still to be properly understood, in particular, when blended with specific active fillers. In this context, the crystallization of PVDF blended with the ionic liquid (IL) 1-ethyl-3-methylimidazolium hexafluorophosphate ([Emim][PF6]) has been analyzed. Both components are capable of crystallizing from the melt. The growth of the crystalline phases of PVDF during isothermal crystallization at different temperatures has been monitored using Fourier transform infrared (FTIR) spectroscopy. The isothermal crystallization kinetics of PVDF and the melting temperatures of both PVDF and IL were characterized by differential scanning calorimetry, and the microstructures of the blends were analyzed by optical and electron microscopy. It is observed for [Emim][PF6]/PVDF blends that the isothermal crystallization from the melt between 120 and 162 degrees C produces PVDF crystallites in the beta and. electroactive phases, while the formation of a-phase crystals is nearly suppressed. The morphology of the blends is altered by the addition of IL, which results in the separation of solid phases at room temperature. In addition, [Emim][PF6] remains liquid when mixed with the amorphous PVDF chains due to the cryoscopic descent., This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding UID/FIS/04650/2019. The authors thank FEDER funds through the COMPETE 2020 Program and National Funds through FCT under the projects PTDC/BTM-MAT/28237/2017, PTDC/EEI-SII/5582/2014, and PTDC/FIS-MAC/28157/2017. D.M.C. thank the FCT for grant SFRH/BPD/121526/2016 and C.M.C. for the Investigator FCT Contract 2020.04028.CEECIND. The work of the Spanish groups has been funded by the Spanish State Research Agency (AEI) through the PID2019-106099RB-C41/AEI/10.13039/501100011033 project and from the Basque Government Industry and Education Departments under the ELKARTEK and PIBA (PIBA-2018-06) programs, respectively. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrical stimulation: Effective cue to direct osteogenic differentiation of mesenchymal stem cells?

  • Guillot-Ferriols, María Teresa
  • Lanceros-Méndez, Senentxu
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Mesenchymal stem cells (MSCs) play a major role in bone tissue engineering (BTE) thanks to their capacity for osteogenic differentiation and being easily available. In vivo, MSCs are exposed to an electroactive microenvironment in the bone niche, which has piezoelectric properties. The correlation between the electrically active milieu and bone's ability to adapt to mechanical stress and self-regenerate has led to using electrical stimulation (ES) as physical cue to direct MSCs differentiation towards the osteogenic lineage in BTE. This review summarizes the different techniques to electrically stimulate MSCs to induce their osteoblastogenesis in vitro, including general electrical stimulation and substrate mediated stimulation by means of conductive or piezoelectric cell culture supports. Several aspects are covered, including stimulation parameters, treatment times and cell culture media to summarize the best conditions for inducing MSCs osteogenic commitment by electrical stimulation, from a critical point of view. Electrical stimulation activates different signaling pathways, including bone morphogenetic protein (BMP) Smad-dependent or independent, regulated by mitogen activated protein kinases (MAPK), extracellular signal-regulated kinases (ERK) and p38. The roles of voltage gate calcium channels (VGCC) and integrins are also highlighted according to their application technique and parameters, mainly converging in the expression of RUNX2, the master regulator of the osteogenic differentiation pathway. Despite the evident lack of homogeneity in the approaches used, the ever-increasing scientific evidence confirms ES potential as an osteoinductive cue, mimicking aspects of the in vivo microenvironment and moving one step forward to the translation of this approach into clinic., This work was supported by the Spanish State Research Agency (AEI) through Projects PID2019-106000RB-C21/AEI/10.13039/501100011 033, PID2019-106099RB-C41/AEI/10.13039/501100011033 and PID2019-106099RB-C43/AEI/10.13039/501100011033 (including FEDER funds). The CIBER-BBN initiative is funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. Maria Guillot-Ferriols received government funding for her doctoral thesis [Grant Number BES-2017-080398FPI]. Funding from the FCT Fundacao para a Ciencia e a Tecnologia (FCT) under the strategic funding UID/FIS/04650/2020 and from the Basque Government Industry Departments under the ELKARTEK program is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Poly(vinylidene) fluoride membranes coated by heparin/collagen layer-by-layer, smart biomimetic approaches for mesenchymal stem cell culture

  • Guillot-Ferriols, María Teresa
  • Correia, D.M.
  • Carabineiro, S.A.C.
  • Lanceros-Méndez, S.
  • Rodriguez-Hernandez, Jose-Carlos|||0000-0002-1735-824X
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] The use of piezoelectric materials in tissue engineering has grown considerably since inherent bone piezoelectricity was discovered. Combinations of piezoelectric polymers with magnetostrictive nanoparticles (MNP) can be used to magnetoelectrically stimulate cells by applying an external magnetic field which deforms the magnetostrictive nanoparticles in the polymer matrix, deforming the polymer itself, which varies the surface charge due to the piezoelectric effect. Poly(vinylidene) fluoride (PVDF) is the piezoelectric polymer with the largest piezoelectric coefficients, being a perfect candidate for osteogenic differentiation. As a first approach, in this paper, we propose PVDF membranes containing magnetostrictive nanoparticles and a biomimetic heparin/ collagen layer-by-layer (LbL) coating for mesenchymal stem cell culture. PVDF membranes 20% (w/v) with and without cobalt ferrite oxide (PVDF-CFO) 10% (w/w) were produced by non-solvent induced phase separation (NIPS). These membranes were found to be asymmetric, with a smooth surface, crystallinity ranging from 65% to 61%, and an electroactive beta-phase content of 51.8% and 55.6% for PVDF and PVDF-CFO, respectively. Amine groups were grafted onto the membrane surface by an alkali treatment, confirmed by ninhydrin test and X-ray photoelectron spectroscopy (XPS), providing positive charges for the assembly of heparin/collagen layers by the LbL technique. Five layers of each polyelectrolyte were deposited, ending with collagen. Human mesenchymal stem cells (hMSC) were used to test cell response in a short-term culture (1, 3 and 7 days). Nucleus cell counting showed that LbL favored cell proliferation in PVDF-CFO over non-coated membranes., This work has been funded by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the PID2019-106099RB-C41/AEI/10.13039/501100011033 and PID2019-106099RB-C43/AEI/10.13039/501100011033 projects and the Associate Laboratory for Green Chemistry-LAQV financed by national funds from FCT/MCTES (UIDB/50006/2020). Maria GuillotFerriols acknowledges the Spanish Government funding of her doctoral thesis through a BES-2017-080398 FPI Grant. The CIBER-BBN (CB06/01/1026) initiative is funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. D.M.C is also grateful to the FCT-Fundacao para a Ciencia e Tecnologia for grant SFRH/BPD/121526/2016. Finally, the authors acknowledge funding from the Basque Government Industry and Education Department under the ELKARTEK, HAZITEK and PIBA (PIBA-2018-06) programs, respectively, also Dr. Carlos Sa (CEMUP) for assistance with the XPS analyses.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assemblable 3D biomimetic microenvironment for hMSC osteogenic differentiation

  • Martins, Luis A.
  • Cordón, Lourdes
  • Sempere, Amparo
  • Ribeiro, Clarisse
  • Lanceros-Méndez, Senentxu
  • Gomez-Ribelles, Jose Luis
  • García-Parra, Nadia
  • Ródenas Rochina, Joaquín|||0000-0001-5764-207X
[EN] Adequate simulation mimicking a tissue's native environment is one of the elemental premises in tissue engineering. Although various attempts have been made to induce human mesenchymal stem cells (hMSC) into an osteogenic pathway, they are still far from widespread clinical application. Most strategies focus primarily on providing a specific type of cue, inadequately replicating the complexity of the bone microenvironment. An alternative multifunctional platform for hMSC osteogenic differentiation has been produced. It is based on poly(vinylidene fluoride) (PVDF) and cobalt ferrites magnetoelectric microspheres, functionalized with collagen and gelatin, and packed in a 3D arrangement. This platform is capable of performing mechanical stimulation of piezoelectric PVDF, mimicking the bones electromechanical biophysical cues. Surface functionalization with extracellular matrix biomolecules and osteogenic medium complete this all-round approach. hMSC were cultured in osteogenic inducing conditions and tested for proliferation, surface biomarkers, and gene expression to evaluate their osteogenic commitment., This research was funded by MCIN/AEI /10.13039/501100011033 Grants PID2019-106099RB-C41 and -C43. The research was also supported by CIBER-Consorcio Centro de Investigacion Biomedica en Red-CB06/01/1026, Instituto de Salud Carlos III, Ministerio de Ciencia e Innovacion. This work was supported by the FCT Fundaçao para a Ciencia e Tecnologia (FCT): strategic funding UID/FIS/04650/2020 unit and contract under the Stimulus of Scientific Employment, Individual Support (CEECIND) 2020.04163.CEECIND (C.R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Protein-Functionalized Microgel for Multiple Myeloma Cells&apos, 3D Culture

  • Marin-Paya, Juan Carlos
  • Cordón, Lourdes
  • Sempere, Amparo
  • Clara-Trujillo, Sandra|||0000-0002-6455-2993
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] Multiple myeloma is a hematologic neoplasm caused by an uncontrolled clonal proliferation of neoplastic plasma cells (nPCs) in the bone marrow. The development and survival of this disease is tightly related to the bone marrow environment. Proliferation and viability of nPCs depend on their interaction with the stromal cells and the extracellular matrix components, which also influences the appearance of drug resistance. Recapitulating these interactions in an in vitro culture requires 3D environments that incorporate the biomolecules of interest. In this work, we studied the proliferation and viability of three multiple myeloma cell lines in a microgel consisting of biostable microspheres with fibronectin (FN) on their surfaces. We also showed that the interaction of the RPMI8226 cell line with FN induced cell arrest in the G0/G1 cell cycle phase. RPMI8226 cells developed a significant resistance to dexamethasone, which was reduced when they were treated with dexamethasone and bortezomib in combination., This research was funded by the Generalitat Valenciana, grant number PROMETEO/2016/063; JLGR acknowledges that support by was funded by the Spanish State Research Agency (AEI) through the PID2019-106099RB-C41/AEI/10.13039/501100011033 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biomimetic Growth of Hydroxyapatite in Hybrid Polycaprolactone/Graphene Oxide Ultra-Porous Scaffolds

  • Fuster-Gómez, Sandra|||0000-0001-5788-3981
  • Vidaurre, Ana|||0000-0003-3394-1176
  • Campillo-Fernández, Alberto J.|||0000-0002-2978-5994
  • Castilla Cortázar, María Isabel Cecilia
[EN] This paper reports the preparation and character-ization of hybrid scaffolds composed of polycaprolactone (PCL) and different graphene oxide (GO) amounts, intending to incorporate the intrinsic characteristics of their constituents, such as bioactivity and biocidal effect. These materials were fabricated by a solvent-casting/particulate leaching technique showing a bimodal porosity (macro and micro) that was around 90%. The highly interconnected scaffolds were immersed in a simulated body fluid, promoting the growth of a hydroxyapatite (HAp) layer, making them ideal candidates for bone tissue engineering. The growth kinetics of the HAp layer was influenced by the GO content, a remarkable result. Furthermore, as expected, the addition of GO neither significantly improves nor reduces the compressive modulus of PCL scaffolds. The thermal behavior of composites was investigated by differential scanning calorimetry, showing an increase in crystallinity as the addition of GO raised, which implies that GO nanosheets can act as seeds to induce the crystallization of PCL. The improved bioactivity was demonstrated by the deposition of an HAp layer on the surface of the scaffold with GO, especially with a 0.1% GO content., The authors are grateful for the support of the Spanish Ministry of Science, Innovation and Universities through (i) PID2021-126612OB-I00 and (ii) PID2019-106099RB-C41. Also, this research was supported by (iii) CIBER -Consorcio Centro de Investigación Biomédica en Red- (CB06/01/1026), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación and (iv) H2020 FET-OPEN grant 964562. FESEM images were taken by the authors at the Microscopy Service of the Universitat Politecnica &#768; de Valencia, &#768; whose advice is greatly appreciated.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of Ionic Liquid Content on the Crystallization Kinetics and Morphology of Semicrystalline Poly(vinylidene Fluoride)/Ionic Liquid Blends

  • Correia, Daniela M.
  • Costa, Carlos M.
  • Lanceros-Méndez, Senentxu
  • Rodriguez-Hernandez, Jose-Carlos|||0000-0002-1735-824X
  • Tort-Ausina, Isabel|||0000-0002-1900-914X
  • Teruel Biosca, Laura|||0000-0002-0943-9031
  • Torregrosa Cabanilles, Constantino|||0000-0002-2786-3549
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] The crystallization kinetics of poly(vinylidene fluoride) (PVDF) in blends with the ionic liquid (IL) 1-ethyl-3-methylimidazolium chloride [Emim][Cl] has been studied as a function of [Emim][Cl] content up to 40 wt %. Blends were produced by a solvent casting technique from diluted solutions and solvent evaporation at a temperature higher than the melting point of PVDF followed by cooling to room temperature. Polymer phase, morphology, and crystallization behavior were evaluated. When the molten blend was crystallized from the melt, it was observed that [Emim][Cl] induces nucleation of PVDF in the electroactive and highly polar beta-crystalline phase, while pure PVDF crystallizes in the a phase with the same thermal treatments. It is shown that PVDF crystal growth segregates an amorphous phase rich in IL molecules to the surface of the films and that the IL also remains in the spaces between the lamellae or between spherulites as demonstrated by scanning electronic microscopy (SEM) and polarizing optical microscope (POM) images. Differential scanning calorimetry results of isothermal crystallization show the dependence of equilibrium melting temperature and the Avrami exponent with the [Emim][Cl] content., This work was supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding UID/FIS/04650/2020. The authors thank FEDER funds through the COMPETE 2020 Programme and National Funds through FCT under the Projects PTDC/BTM-MAT/28237/2017, PTDC/EMD-EMD/28159/2017, and PTDC/FIS-MAC/28157/2017. D.M.C. and C.M.C. also thank to the FCT for grants SFRH/BPD/121526/2016 and SFRH/BPD/112547/2015, respectively. Financial support from the Spanish Ministry of Economy and Competitiveness (MINECO) through the Project MAT2016-76039-C4-1 -R (AEI/FEDER, UE) (including the FEDER financial support), from the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the project PID2019-106099RB-C43/AEI/10.13039/501100011033 and from the Basque Government Industry and Education Departments under the ELKARTEK, HAZ-ITEK, and PIBA (PIBA-2018-06) programs, respectively, are acknowledged. CIBER-BBN is an initiative funded by the VI National R&D&I Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program. CIBER Actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Segmented Polyurethanes Based on Adipate and Sebacate Biodegradable Polyesters for Use as Nerve Guide Conduits in Peripheral Nerve Regeneration

  • Sabido Barahona, Alexis B.
  • Vargas-Coronado, Rossana Faride
  • Hernández-Sánchez, Fernando
  • Martínez-Richa, Antonio
  • Gómez Ribelles, José L.
  • Cauich-Rodríguez, Juan V.
  • Marcos-Fernández, Angel
This study investigated the chemical, thermal, and mechanical properties of segmented polyurethanes (SPUs) synthesized using less common biodegradable polyester polyols, specifically poly(adipate) (PAD) and poly(sebacate) (PSC), to evaluate their potential as nerve guidance conduits (NGCs) in peripheral nerve regeneration. The synthesis of novel 4,4′ methylene-bis-cyclohexyl diisocyanate (HMDI) SPUs was conducted in a two-step process: prepolymer formation and chain extension with 1,4-butanediol (BO) or 1,4-butanediamine (BA). SPUs were synthesized with two molar ratios—polyol:HMDI:BA/BO at 1:2:1 and 1:3:2 for the PAD:HMDI:BA system—to optimize mechanical properties. 1HRMN analysis verified the expected chemical structure of SPUs, whereas Raman and IR spectroscopy confirmed successful polyurethane synthesis. X-ray diffractograms showed that PAD-based SPUs (SPUPAD) were amorphous while PSC-based SPUs (SPUPSC) exhibited semi-crystalline behavior. SPUPAD showed only one degradation stage by TGA, while DSC showed one thermal event. In contrast, SPUPSC exhibited two degradation stages and three thermal events that confirmed phase separation. The longitudinal tensile properties of an NGC fabricated from SPUA-PAD-2 (PAD:HMDI:BA (1:3:2)) after 30 days of immersion in water (25 °C) showed a lower modulus (4.46 ± 0.5 MPa) than native intact nerves (15.87 ± 2.21 MPa) but a similar modulus to extracted nerves (8.19 ± 7.27 MPa). This system exhibited a longitudinal tensile force of 11.1 ± 1.6 N, which is lower than that of peripheral nerves (19.85 ± 7.21 N) but higher than that of commercial collagen-based nerve guide conduits (6.89 ± 2.6 N). The observed properties suggest that PUA-PAD-2 has potential as a biomaterial for nerve regeneration applications., This work was supported by the Consejo Nacional de Ciencia y Tecnología (CONACYT) México (Project 1360 and 248378), and by Ministerio de Ciencia, Innovación y Universidades, Spain (MCIN/AEI /10.13039/501100011033, Grants PID2023-147542OB-I00 and PID2019-106099RB-C41)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Multiple myeloma cell simulation using an agent-based framework coupled with a continuous fluid model

  • Urdeitx, Pau
  • Clara-Trujillo, Sandra
  • Gomez Ribelles, Jose Luis
  • Doweidar, Mohamed H.
Bone marrow mechanical conditions play a key role in multiple myeloma cancer. The complex mechanical and chemical conditions, as well as the interactions with other resident cells, hinder the development of effective treatments. Agent-based computational models, capable of defining the specific conditions for every single cell, can be a useful tool to identify the specific tumor microenvironment. In this sense, we have developed a novel hybrid 3D agent-based model with coupled fluid and particle dynamics to study multiple myeloma cells’ growth. The model, which considers cell–cell interactions, cell maturation, and cell proliferation, has been implemented by employing user-defined functions in the commercial software Fluent. To validate and calibrate the model, cell sedimentation velocity and cell proliferation rates have been compared with in vitro results, as well as with another previously in-house developed model. The results show that cell proliferation increased as cell–cell, and cell–extracellular matrix interactions increased, as a result of the reduction n maturation time. Cells in contact form cell aggregates, increasing cell–cell interactions and thus cell proliferation. Saturation in cell proliferation was observed when cell aggregates increased in size and the lack of space inhibited internal cells’ proliferation. Compared with the previous model, a huge reduction in computational costs was obtained, allowing for an increase in the number of simulated cells.