Pasar al contenido principal

DISPOSITIVO FOTOELECTROQUIMICO DE DOS ELECTRODOS PARA LA PRODUCCION DE HIDROGENO VERDE UTILIZANDO COMPONENTES NO CRITICOS Y DERIVADOS DE GRAFENO

PID2022-139671OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards sustainable TiO2 photoelectrodes based on cellulose nanocrystals as a processing adjuvant

  • Martínez-Barón, Carlos
  • Calvo Peña, Víctor
  • Hernández-Ferrer, Javier
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • González Domínguez, José Miguel
  • Maser, Wolfgang K.
  • Benito, Ana M.
8 figures, 2 tables.-- Supplementary information available., Photoelectrodes of TiO2 in the form of films are commonly fabricated using screen printing techniques, employing viscous commercial TiO2 pastes. However, these pastes comprise environmentally unfriendly, multicomponent formulations designed to manufacture the photoactive TiO2 nanoparticles. To strive for sustainable processing and pave the way for the use of liquid-phase film processing technologies, the inherent limited water dispersibility of TiO2 nanoparticles must be overcome. In this study, we show that cellulose nanocrystals, produced via an environmentally benign one-pot hydrolysis process, enable the preparation of stable TiO2 water dispersions. The remarkable stability of these dispersions, evidenced by their outstanding ξ-potential values of −34 mV, facilitates the fabrication of macroporous TiO2 photoactive films throughout spray coating. Employed as photoanodes in a photoelectrochemical cell, our TiO2 photoanodes are compared with conventional TiO2 electrodes obtained from commercial pastes under water splitting conditions. Interestingly, our photoanodes reveal a remarkable three-fold enhancement of the photocurrent performance (132 vs. 46 μA cm−2) and a four-fold increase in the on–off response rate (4 vs. 1 s). These findings underscore the valuable role of cellulose nanocrystals as a green processing asset for achieving TiO2 water dispersions. Moreover, they serve as sacrificial adjuvants for preparing highly macroporous and functional film photoelectrodes, representing a significant step forward in the pursuit of sustainable and efficient materials processing., Sustainability spotlight : Photoelectrochemical processes are essential for many clean energy production methods. For such purpose, the involved electrodes are typically fabricated by means of polluting additives and toxic solvents. Designing efficient electrodes in a sustainable way is of fundamental interest. There is thus a need for non-toxic and green aqueous dispersants, for which nanocellulose shows promising prospects of sustainability and cost-effectiveness. Here we use cellulose nanocrystals in combination with TiO2 nanoparticles, not only to valorise renewable raw materials, but also to conform functional photoanodes in a ground-breaking way. These electrodes are able to undergo photoelectrochemical water splitting, performing more efficiently than a commercial TiO2 benchmark due to the role of nanocellulose, which goes beyond a mere dispersing agent. Our methodology addresses important aspects of responsible consumption and production (UN SDG 12), affordable and clean energy (UN SGD 7), and climate action (UN SDG 13)., Financial support from Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grants PID2022-139671OB-I00 and PID2020-120439-RA-I00, as well as by the Gobierno de Aragón (DGA) under projects T03_23R and E47_23R (Grupos de Investigación Reconocidos) is acknowledged. V. C. is thankful for his PhD contract funded by DGA (Ref. CUS/581/2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanocellulose: The ultimate green aqueous dispersant for nanomaterials

  • Calvo Peña, Víctor
  • Martínez-Barón, Carlos
  • Fuentes Varela, Laura
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González Domínguez, José Miguel
5 figures, 1 table., Nanocellulose, a nanoscale derivative from renewable biomass sources, possesses remarkable colloidal properties in water, mechanical strength, and biocompatibility. It emerges as a promising bio-based dispersing agent for various nanomaterials in water. This mini-review explores the interaction between cellulose nanomaterials (nanocrystals or nanofibers) and water, elucidating how this may enable their potential as an eco-friendly dispersing agent. We explore the potential of nanocellulose derived from top-down processes, nanocrystals, and nanofibers for dispersing carbon nanomaterials, semiconducting oxide nanoparticles, and other nanomaterials in water. We also highlight its advantages over traditional methods by not only effectively dispersing those nanomaterials but also potentially eliminating the need for further chemical treatments or supporting stabilizers. This not only preserves the exceptional properties of nanomaterials in aqueous dispersion, but may even lead to the emergence of novel hybrid functionalities. Overall, this mini-review underscores the remarkable versatility of nanocellulose as a green dispersing agent for a variety of nanomaterials, inspiring further research to expand its potential to other nanomaterials and applications., Financial support from Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grants PID2022-139671OB-I00 and PID2020-120439-RA-I00, as well as from Gobierno de Aragón (DGA) under project T03_23R (Grupos de Investigación Reconocidos). V.C. and C.M.-B. thank the DGA for funding their PhD contracts (Ref. CUS/581/2020 and CUS/621/2023)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbon nanomaterials-based inks and electrodes using chitin nanocrystals

  • Calvo Peña, Víctor
  • Martínez-Barón, Carlos
  • Vázquez Conejo, Benjamín
  • Domínguez Alfaro, Antonio
  • Paleo, A. J.
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González Domínguez, José Miguel
5 figures, 2 tables., Dispersing 1D carbon nanomaterials (CNMs) for film processing traditionally relies on surfactants or organic solvents. These methods, however, raise environmental concerns and can negatively impact the final properties of the CNMs. In this work we demonstrate that chitin nanocrystals (ChNCs) synthesized via acid hydrolysis provide a greener pathway for the development of waterborne CNMs-based inks, including single-walled carbon nanotubes, multiwalled carbon nanotubes, and carbon nanofibers. Various concentrations of ChNCs were mixed with each type of CNM to maximize the CNM concentration within the ink. In-depth characterization of the CNM/ChNC inks preceded their processing into supported conductive films by spray-coating. A subsequent thermal treatment of ChNCs at 450 °C leads to the efficient removal of ChNC and results in a significant enhancement of the electrical conductivity. Moreover, freeing the CNMs network structure contributes to increased electrochemical performance of the treated films, as expressed by improved Faradaic charge transfer efficiencies and kinetics reflected by 1 order of magnitude reduced rate constants, when tested with various redox probes. Our findings highlight the potential of ChNCs as a sustainable processing adjuvant of CNMs, leading to electrically conductive electrodes with suitable electrochemical properties for their use in diverse devices and applications., Financial support from Spanish MCINN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” by the European Union under project grants PID2019-104272RB-C51, PID2020-120439RA-I00, and PID2022-139671OB-I00 as well from Spanish CSIC (PIE iniciación ref 202280I007) and from Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_23R and E47_23R) are acknowledged. V.C. and C.M.-B. thank the DGA for funding their PhD contracts (ref. CUS/581/2020 and CUS/621/2023). A.J.P. gratefully acknowledges support from the FCT-Foundation for Science and Technology by the 2020–2023 Project UIDB/00264/2020. A.D.A. acknowledges UPV/EHU for funding transferred by the European Union-Next Generation EU by the Margarita Salas fellowship (MARSA N° agreement 22/77)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring ultrafast carrier dynamics in photoelectrochemical water splitting using transient absorption spectroscopy

  • Sivan, Aswathi K.
  • Galán, Alejandro
20 figures, 1 table.-- Under a Creative Commons license CC-BY 4.0., Hydrogen fuel produced from water splitting using sunlight remains one of the cleanest and most sustainable energy sources. However, photoelectrochemical hydrogen production faces several challenges, including poor sunlight absorption, deficient charge carrier lifetime and transfer rates, and very sluggish kinetics of the water oxidation half-reaction. To address these challenges, researchers have concentrated on enhancing the efficiency of photoelectrochemical water splitting. A critical factor in this enhancement is a deeper understanding of the fundamental processes involved in photoabsorption and the subsequent oxidation evolution reaction. The advent of ultrafast lasers has enabled the detailed tracking of charge carriers within materials after sunlight absorption, including their separation and migration to the surface for water oxidation. Ultrafast transient absorption spectroscopy is a powerful technique that allows real-time observation of the behavior of excited states and charge carriers on femtosecond to nanosecond timescales. Recent studies utilizing ultrafast transient absorption spectroscopy are explored to investigate the dynamics of charge carriers in photoelectrochemical water splitting, providing insights into the mechanisms that lead to the design of enhanced photoanodes with improved efficiency., A.K.S. and A.G.-G. contributed equally to this work. A.K.S. acknowledges financial support from the Georg H. Endress Foundation. A.G.-G. acknowledges funding from Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grant PID2022-139671OB-I00, as well from the Diputación General de Aragón (DGA) under projects T03_23R (Grupos de Investigación Reconocidos)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrids of deep HOMO organic cyanoacrylic acid dyes and graphene nanomaterials for water splitting photoanodes

  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Orduna, Jesús
  • Villacampa, Belén
  • Blesa, María Jesús
4 figures, 1 tables.-- This research made use of Marvin, a core Python package and web framework for MaNGA data, developed by Brian Cherinka, José Sánchez-Gallego, Brett Andrews, and Joel Brownstein. (MaNGA Collaboration, 2018)., Dye-sensitization is a promising strategy to improve the light absorption and photoactivity abilities of wide-bandgap semiconductors, like TiO2. For effective water-splitting photoanodes with no sacrificial agents, the electrochemical potential of the dye must exceed the thermodynamic threshold needed for the oxygen evolution reaction. This study investigates two promising organic cyanoacrylic dyes, designed to meet that criterion by means of theoretical calculations. Both yellow-colored dyes were synthesized and characterized by optical and photoelectrochemical techniques, demonstrating strong light absorption in the visible region, suitable experimental reduction potentials, and adsorption from the organic solvent onto mesoporous TiO2 layers. In addition, to promote immobilization in aqueous electrolytes, the dyes were hybridized with graphene oxide or multi-walled carbon nanotubes. Photoelectrochemical analysis of the dye-sensitized photoelectrodes demonstrated efficient charge transfer from the dyes to the TiO2 photoanode under simulated solar light. While the starting photocurrent notably surpassed the blank TiO2, a subsequent decay points to kinetic obstacles that still need to be overcome., Support from Spanish MCIN/AEI/10.13039/501100011033 and MICIU/AEI /10.13039/501100011033 and “ERDF A Way of making Europe” under project grant PID2022-139671OB-I00 and CEX2023-001286-S, as well as from the Gobierno de Aragón (DGA, T03_23R and E47-23R) and Universidad de Zaragoza (UZ2023-CIE-01)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multifaceted role of H2O2 in the solvothermal synthesis of green-emitting nitrogen-doped graphene quantum dots

  • Carrera Jiménez, Clara
  • Galán, Alejandro
  • Maser, Wolfgang K.
  • Benito, Ana M.
6 figures.-- Under a Creative Commons BY 3.0 license.-- Open peer-review content at https://www.webofscience.com/api/gateway/wos/peer-review/10.1039/D4SC07896A., Fluorescent nitrogen-doped carbon dots (N-GQDs) with long-wavelength emission properties are of increased interest for technological applications. They are widely synthesized through the solvothermal treatment of graphene oxide (GO) using N,N-dimethylformamide (DMF) as a cleaving and doping agent. However, this process simultaneously generates undesired interfering blue-emissive by-products. In this study, we present a straightforward method for synthesizing N-GQDs exclusively exhibiting green fluorescence. The key innovation lies in the addition of hydrogen peroxide (H2O2) to the DMF-driven one-pot solvothermal cleavage process. Systematically controlling the reaction conditions, we elucidate the threefold beneficial role of H2O2: first, it acts as a radical source facilitating the degradation of DMF and the generation of nitrogen-containing radicals, essential for N-GQD formation; second, it prevents the thermal reduction of GO, thus ensuring persistent reaction pathways with DMF-derived radicals; and third, it suppresses the self-reaction of DMF-derived radicals, thereby avoiding the formation of undesired blue-fluorescent by-products. Our findings on the reaction mechanism and the advantageous role of H2O2 open new possibilities for the rational design of N-GQDs genuinely emitting at long wavelengths., Financial support from Spanish MCIN/AEI/10.13039/ 501100011033 and “ERDF A way of making Europe” under project grant PID2022-139671OB-I00, as well as from Gobierno de Aragón (DGA), under Grupo de Investigación Reconocido DGA-T03_23R is acknowledged. Clara Carrera thanks DGA for funding her PhD contract (IIU/796/2019)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Control strategies for solution-processed ZTO-based thin-film transistors tailored toward volatile organic compound detection

  • Miller, Lauren R.
  • Galán, Alejandro
  • NIcholson, Ben
  • Bowen, Leon
  • Monier, Guillaume
  • Borthwick, Robert J.
  • White, Freddie
  • Saeed, Mana
  • Thompson, Richard L.
  • Robert-Goumet, Christine
  • Atkinson, Del
  • Zeze, Dagou A.
  • Chaudhry, Mujeeb Ullah
5 figures, 2 tables., A breakthrough in the fabrication of amorphous Zn-Sn-O (ZTO)-based thin-film transistors (TFTs) is presented for volatile organic compound (VOC) detection. The incorporation of highly abundant materials offers substantial economic and environmental benefits. However, analyses for the design of a multilayer channel are still limited. This work demonstrates that the chemical environment influences ZTO-based TFTs' carrier transport properties and can be tailored for detecting specific VOCs, ensuring high specificity in diagnosing life-threatening conditions through simple breath analysis. A low-cost, high-throughput, fully solution-processed ZTO and ZnO multilayering strategy is adopted. The in-depth compositional and morphological analyses reveal that low surface roughness, excellent Zn and Sn intermixing, high oxygen vacancy (31.2%), and M-OH bonding (11.4%) contents may account for the outstanding electrical and sensing performance of ZTO-ZTO TFTs. Notably, these TFTs achieve near-zero threshold voltage (2.20 V), excellent switching properties (107), and high mobility (10 cm2V−1s−1). This results in high responsivity to alcohol vapors at low-voltage operation with peak responsivity for methanol (R = 1.08 × 106) over two orders of magnitude greater than acetone. When miniaturized, these devices serve as easy-to-operate sensors, capable of detecting VOCs with high specificity in ambient conditions., M.U.C. thanks the Engineering and Physical Sciences Research Council (EPSRC) (New Investigator Award # EP/V037862/1 and Capital Equipment Grant EC/RF080422) for financial support. A.G.G. acknowledges funding from Spanish MCIN (MCIN/AEI/10.13039/501100011033) and “ERDF A way of making Europe” under project grant PID2022-139671OB-I00, as well from the Gobierno de Aragón (DGA) under projects T03_23R (Grupos de Investigación Reconocidos). G.M. gratefully acknowledges financial support from the project SASS AV0027152 from FEDER-FSE-2014-2020 and the project 16-IDEX-0001 CAP 20–25., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication of α-Fe2O3 nanoparticles/g-C3N4 direct Z-scheme heterojunction of durable photocatalytic activity

  • Galán, Alejandro
  • Fernández-Pato, Isaías
  • Zaluzec, Nestor J.
  • Cambré, Sofie
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
The fabrication of a nanohybrid photocatalyst that combines α-Fe2O3 nanoparticles with graphitic carbon nitride (g-C3N4) is reported. The ensuing direct Z-scheme heterojunction greatly boosts the photocatalytic activity of the α-Fe2O3/g-C3N4 nanohybrids. This results in organic dye degradation rates more than two times higher than its individual components, promoted by the efficient charge separation and transfer of the Z-scheme heterojunction mechanism of the nanohybrid photocatalyst. In addition, recyclability tests show an outstanding stability of the nanohybrids spanning five consecutive dye degradation experiments, during which the degradation rate is slightly improved. The origin of the improved photocatalytic performance of the nanohybrid lies in the intimate interaction between α-Fe2O3 and g-C3N4 afforded by the two-step fabrication process, which enables the direct and controlled growth of α-Fe2O3 nanoparticles on g-C3N4. A first ultrasound impregnation step promotes the effective anchoring of stable Fe species via Fe−N and C−N/C−O bonding, while a second microwave phase conversion step induces the subsequent growth of α-Fe2O3 nanoparticles on the g-C3N4 sheets. Careful control of the FeCl3 precursor concentration up to a threshold value of 0.25 M during impregnation enables complete control over their size and phase. This approach clearly highlights the benefits of microwave reactor systems in the fabrication of hematite-based Z-scheme photocatalytic, overcoming the limitations of conventional thermal treatment technology., Funding from Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grant PID2022-139671OB-I00, as well as from the Gobierno de Aragón (DGA) under projects T03_23R (Grupos de Investigación Reconocidos), is acknowledged. A.G.-G. is thankful for his Margarita Salas Postdoctoral Fellowship grant (RSU.UDC.MS21). R.A. acknowledges funding by the Spanish MICIU (PID2019-104739GB-I00/AEI/10.13039/501100011033, PID2023-151080NB-I00/AEI/10.13039/501100011033, and CEX2023-001286-S MICIU/AEI/10.13039/501100011033) and by DGA under project E13-23R. The work at Argonne National Laboratory (N.J.Z./R.A.) was supported by the Advanced Materials for Energy Water Systems (AMEWS) Center, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences at Argonne National Laboratory under contract DE-AC02-06CH11357, as well as in part by the National Science Foundation Major Research Instrumentation (MRI) Program (NSF DMR-2117986) at the University of Chicago. The Argonne Picoprobe AEM was developed under CRADA 1300701 between Argonne National Laboratory and Thermo Fisher Scientific Instruments. S.C. thanks the Fund for scientific research - Flanders (FWO) for infrastructure funding for the EPR equipment (I004920N)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbon nanotube film electrodes enabled by nanostructured biopolymers through aqueous processing

  • Martínez-Barón, Carlos
  • Calvo Peña, Víctor
  • Álvarez Sánchez, Miguel Ángel
  • Pascual, F. Javier
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • Ansón-Casaos, Alejandro
  • González Domínguez, José Miguel
7 figures, 2 tables.-- Under a CC BY-NC 3.0 license., Processing carbon nanotubes (CNTs) into conductive films via liquid-phase is highly attractive for the fabrication of electronic and electrochemical device components. However, conventional deposition methods usually suffer from several limitations, including environmental concerns, loss of intrinsic properties, and poor reproducibility. Nanostructured biopolymers (NBs), such as cellulose (CNCs) and chitin (ChNCs) nanocrystals, offer an environmentally friendly strategy for dispersing CNTs in water alternative to organic solvents, surfactants or chemical functionalization. In this work, we present the first direct comparison of conductive and electroactive films resulting from using CNCs and ChNCs as dispersing agents for both single-walled and multi-walled CNTs. The as-made aqueous dispersions are used as inks to fabricate CNT/NB films via spray coating, achieving excellent homogeneity, controllable film thickness, and sheet resistances mostly below 130 Ω □−1. Furthermore, we demonstrate that post-deposition thermal treatment at 450 °C in an inert atmosphere effectively pyrolyzes the non-conductive NB matrix while increasing contacts between CNTs in the network, leading to enhanced electrical conductivities and electrochemically active surface areas. These findings highlight NBs as greener processing agents for the formulation of waterborne CNT inks and emphasize their relevance for the controlled and sustainable fabrication of conductive films and electrodes., Financial support from the Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” by the European Union under project grants PID2022-139671OB-I00 and PID2023-147116OB-I00, as well as from the Gobierno de Aragón (DGA), in the R&D&I projects in priority lines and of a multidisciplinary nature (project grant PROY_T41_24), and through the grants to research groups (Grupo Reconocido DGA-T03_23R) is acknowledged. C. M.-B., V. C. and M. Á. Á.-S. thank the DGA for funding their PhD contracts (refs. CUS/621/2023, CUS/581/2020 and IIU/796/2019, respectively)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene oxide–enamino-xanthene charge-transfer hybrids as high-performance sensitizing interfaces for TiO2 photoanodes

  • Martínez-Barón, Carlos
  • Garrido Zoido, Juan Manuel
  • Álvarez Sánchez, Miguel Ángel
  • Cintas, Pedro
  • Palacios, Juan C.
  • Ansón-Casaos, Alejandro
  • Gil, María Victoria
  • Benito, Ana M.
  • Maser, Wolfgang K.
6 figures, 3 tables., Hybrid materials that combine visible-light absorption with efficient charge separation across interfaces are essential for advancing photoelectrochemical (PEC) energy conversion technologies. In this study, we report the synthesis of charge-transfer hybrids composed of graphene oxide (GO) and enamino-xanthene (NH2-X) dyes, prepared via a simple and sustainable liquid-phase mixing approach. Spectroscopic analyses reveal strong interface interactions between GO and NH2-X, leading to suppressed fluorescence and altered electronic transitions, consistent with ground-state charge-transfer processes. When interfaced with TiO2 as a sensitizing layer, the resulting photoanodes deliver a 3.5-fold enhancement in photocurrent, faster saturation kinetics, and improved photopotential generation under visible-light illumination. Electrochemical impedance spectroscopy confirms reduced interface resistance and enhanced charge carrier mobility at both solid–solid and solid–liquid interfaces. The synergistic integration of GO and NH2-X establishes a high-performance sensitizing interface for TiO2 photoanodes, offering a scalable and environmentally benign route toward advanced PEC applications., Financial support from Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grant PID2022-139671OB-I00 and from Gobierno de Aragón (DGA, Grupo Reconocido DGA-T03_23R) are acknowledged. The UEx team thanks the Junta de Extremadura/Fondo Europeo de Desarrollo Regional (FEDER)–European Regional Development Fund (“ERDF-A way of making Europe”) for financial assistance through Grant GR24020. C.M.-B. thanks the DGA for funding his PhD contract (ref. CUS/621/2023)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

3-component (N, Fe, Co) atomically dispersed ORR catalysts prepared by laser-driven decomposition of organic precursors

  • Pakrieva, Ekaterina
  • Hernández-Ferrer, Javier
  • Martínez, Gema
  • Balas, Francisco
  • García-Bordejé, José Enrique
  • Ansón-Casaos, Alejandro
  • Simonelli, Laura
  • Bartolomé, Fernando
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Hueso, José L.
  • Santamaría, Jesús
Data will be made available on request., The sluggish kinetics of the oxygen reduction reaction (ORR) remain a key bottleneck for the commercialization of proton exchange membrane fuel cells (PEMFCs), driving the search for efficient, non-precious metal catalysts. Herein, we present a laser-assisted pyrolysis strategy for the synthesis of nitrogen-doped carbon (NC) materials, both metal-free and containing atomically dispersed Fe and Co, using aerosolized phthalocyanine precursors and a near-instantaneous rapid decomposition under a high-energy laser beam, while preventing metal aggregation. A single-step post-synthetic thermal activation under an NH₃/N₂ atmosphere further tailors the textural and surface properties, without requiring ammonia co-feeding during laser pyrolysis, acid etching, or multiple treatments, marking a significant improvement over our previously reported single atom (Fe-N/C) protocols. The resulting Fe_Co/NC_tr catalyst exhibits high specific surface area, enhanced microporosity, improved graphitization, and increased abundance of electrochemically beneficial nitrogen sites. Compared to our earlier reported Fe–N/C catalysts, Fe_Co/NC_tr delivers significantly higher limiting current densities and enhanced durability in alkaline media. Overall, the developed Fe_Co/NC catalyst exhibits good ORR catalytic activity and outstanding long-term stability in alkaline media, comparable to the state-of-the-art commercial Pt/C catalysts. Cyanide poisoning tests confirm the essential role of atomically dispersed Fe2+ and Co2+ as active ORR sites., The authors thank funding from the Spanish Research Agency and MICN/AEI (projects CNS2022-135911 (J.L.), PID2020-114926RB-I00 (J.S.), PID2022-139671OB-I00 (W.M. and A.B) and PID2023-146481OB-I00 (E.G.). Severo Ochoa funds (CEX2023-001286-S) are acknowledged by MICIU/AEI/10.13039/501100011033. Financial support from Diputación General de Aragón under project T57_23R (J.S.) and T03_23R (W.M., A.B., E.G., A.A.) (Grupos Reconocidos), Project “ERDF A way of making Europe” by the European Union is gratefully acknowledged. EP thanks Juan de la Cierva Formación postdoctoral fellowship (JDC2022-049007-I) financed by MICIU/AEI/10.13039/501100011033 and by the European Union “NextGenerationEU”/PRTR”., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bottom-up assembly of cellulose nanocrystals as a green entry to structured functional carbons

  • Güemes, Lucas
  • Calvo Peña, Víctor
  • Maya Segura, Vanessa B.
  • Pires, Elísabet
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • García-Bordejé, José Enrique
  • González Domínguez, José Miguel
Data will be made available on request., The bottom-up assembly of cellulose nanocrystals (CNCs) into porous scaffolds offers a sustainable route to translate their intrinsic properties into functional 3D materials. This strategy enables precise control over porous architectures, unlocking opportunities for high-performance materials tailored to specific applications. Here, we present the fabrication of structured carbons derived from nanocellulose precursors. CNCs are isolated from cellulosic feedstock in type-I and type-II crystalline allomorphs via a one-pot synthesis process followed by minimal processing steps. The resulting aqueous CNC colloids self-assemble into cross-linked hydrogels through controlled hydrothermal aggregation, followed by lyophilization to produce macroporous aerogels (bulk porosities up to 98%). Each allomorph exhibits distinct aggregation behavior, explored for the first time with type-II CNCs. As proof of concept, these aerogels undergo pyrolysis at varying temperatures and subsequent sulfonation, yielding highly porous carbons functionalized with sulfonic acid groups (functionalization degree of ca. 2400 μmol·g−1). The resulting materials combine macroporosity from hydrothermal assembly with microporosity generated during pyrolysis and sulfonation, forming a hierarchical structure ideal for catalytic applications. Their performance is demonstrated in solketal synthesis (yielding ∼90% of solketal in consecutive cycles after 4 h at room temperature) positioning CNC-based sulfonated aerogels as a greener alternative to conventional Brønsted acid catalysts and surpassing classical activated carbons in sustainability and design., Financial support from the Spanish MCIN/AEI/10.13039/501100011033 and ‘‘ERDF A way of making Europe’’ by the European Union under project grants PID2022-139671OB-I00, PID2023-146481OB-I00 and PID2023-147116OB-I00, as well as from the Gobierno de Aragón (DGA), in the R&D&I projects in priority lines and of a multidisciplinary nature (project grant PROY_T41_24), and through the grants to research groups (Grupo Reconocido DGA-T03_23R) is acknowledged. L.G. thanks the DGA for funding his PhD contract (ref. CUS/702/2022)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The role of mild microwave irradiation in liquid-phase graphene oxide reduction toward aqueous dispersions and conductive films

  • Benito, Ana M.
  • Galán, Alejandro
  • Arenal, Raúl
  • Ansón-Casaos, Alejandro
  • Maser, Wolfgang K.
8 figures, 3 tables., The scalable and sustainable production of high-quality, solution-processable graphene materials remains a central challenge in nanomaterial research. This study investigates the reduction of graphene oxide (GO) in aqueous dispersions using low-power microwave (MW) irradiation and conventional thermal reflux, comparing four common chemical reductants, ascorbic acid, glucose, hydrazine, and sodium borohydride, alongside a reductant-free route. MW irradiation at 200 W induces rapid deoxygenation and enhancement of sp2-domain signatures within seconds, whereas reflux requires extended heating to achieve comparable effects. XPS and Raman analyses reveal that MW treatment promotes a more uniform reduction across reductants and leads to significantly larger apparent crystallite sizes (La) than reflux. Importantly, although chemical reductants remain active under MW conditions, their influence on structural reorganization and electrical performance is considerably diminished, demonstrating that MW field itself governs defect elimination and sp2-domain enrichment under these mild aqueous conditions. The reductant-free MW route yields the highest conductivity (88.4 S/m for 150 nm films) and the largest sp2-domains among all samples. Combined spectroscopic, electrical, and electronic microscopy evidence supports a mechanism in which MW irradiation selectively removes highly defective, oxygen-rich, and sp3-hybridized regions rather than reconstructing the graphene lattice, thereby enriching the remaining framework in extended sp2 networks. Overall, these results position mild MW irradiation as a rapid, and scalable strategy for producing structurally enhanced, water-dispersible rGO dispersions suitable for solution-processed graphene films., Funding from Spanish MICIU/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grants PID2022-139671OB-I00, and PID2023-151080NB-I00, as well as from the Gobierno de Aragón (DGA) T03_23R, and E13_23R (Grupos de Investigación Reconocidos DGA), is acknowledged. R.A also acknowledges funding from the Spanish MICIU with funding from European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon and by the Spanish MICIU as well as the support from the Spanish Severo Ochoa Excellence Programme MICIU/AEI, CEX2023-001286-S MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical detection of sulfamethoxazole in water matrices using green nanomaterials: pilot-scale validation in a solar photo-Fenton process

  • Calvo Peña, Víctor
  • Venegas, Constanza J.
  • Sierra-Rosales, Paulina
  • Miralles Cuevas, Sara
  • Cabrera-Reina, A.
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González Domínguez, José Miguel
5 figures, 4 tables., This work presents an electrochemical sensor designed as a process-monitoring tool for tracking sulfamethoxazole (SMX) during advanced oxidation processes (AOPs) under pilot-scale, realistic wastewater conditions. The sensor is based on eco-friendly aqueous inks combining carbon nanomaterials with nanostructured biopolymers, specifically carbon nanofibers with cellulose nanocrystals (CNF/CNC) or multiwalled carbon nanotubes with chitin nanocrystals (CNT/ChNC), which were deposited onto glassy carbon electrodes (GCEs) to enhance the electrochemical response toward SMX. Among the tested configurations, the CNF/CNC-based sensor exhibited the best performance for SMX monitoring in the mg L−1 concentration range, combining a wide linear response and a detection limit of 0.17 mg L−1 with robust, reproducible behavior. Sensor calibration and performance were evaluated in both ultrapure water and synthetic hospital wastewater, highlighting the impact of matrix effects while confirming reliable operation under complex conditions. Crucially, the sensor was validated during the monitoring of SMX degradation in a pilot-scale solar photo-Fenton process operated at circumneutral pH using Fe3+-EDDS as a catalyst, with electrochemical measurements showing excellent agreement with UHPLC-DAD reference analyses (Pearson's r > 0.99). Rather than targeting ultra-trace detection, this study demonstrates the potential of electrochemical sensing as a rapid, cost-effective, and near-real-time tool for process monitoring and control in high-load effluents, such as hospital and pharmaceutical wastewater. These results bridge the gap between laboratory-scale sensor development and operational wastewater treatment applications, highlighting the relevance of sustainable nanocarbon–biopolymer inks for real-world environmental monitoring., Emerging contaminants in wastewater represent a growing environmental challenge due to their persistence and potential health risks. Traditional detection methods are often costly, complex, or environmentally harmful. This study introduces an eco-friendly electrochemical sensor using carbon nanomaterials dispersed with biobased nanocrystals (cellulose or chitin), without toxic solvents and surfactants. Validated under realistic conditions, including pilot-scale solar photo-Fenton treatment, the sensor enables real-time, scalable monitoring of pollutants. Its green fabrication and operational simplicity make it suitable for decentralized water quality control. By enhancing contaminant detection through green materials and methods, this work supports safer water reuse and contributes directly to UN Sustainable Development Goal 6 (Clean Water and Sanitation), promoting access to clean water through innovative and sustainable technologies., This work was supported by the Spanish MCIN/AEI and “ERDF A way of making Europe” [PID2022-139671OB-I00, PID2023-147116OB-I00], Gobierno de Aragón (DGA) [T03_23R (Grupos de Investigación Reconocidos), CUS/581/2020 (PhD contract) (V. C.), CUS/1668/2022 (research stay) (V. C.), R&D&I projects in priority lines and of a multidisciplinary nature (project grant PROY_T41_24)], ANID-FONDECYT [no. 1231258 (P. S.-R.), no. 11240700 (C. J. V.)], and ANID-FONDAP [No. 1523A0006 (S. M.-C.; A. C.)]. Dr. Miralles-Cuevas would like to acknowledge the RYC2023-042474-I grant, funded by MCIU/AEI/10.13039/501100011033 and the FSE+. SEM images were obtained thanks to the project supported by the “Plan de Fortalecimiento de Universidades Estatales 2019, UTM1999, MINEDUC” (Chile). A. Cabrera would like to acknowledge CNS2024-154926, supported by MICIU/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bio-based PEDOT: nanocellulose hybrids as efficient hole-transport layers for photoelectrochemical devices

  • Domínguez Alfaro, Antonio
  • Galán, Alejandro
  • Hernández-Ferrer, Javier
  • Colom, E.
  • González Domínguez, José Miguel
  • Linares-Barranco, Bernabé
  • Maser, Wolfgang K.
  • Benito, Ana M.
4 figures, 1 table., Developing sustainable hole-transport materials that can match the performance of conventional poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) remains a key challenge for environmentally compatible optoelectronic devices. In this work, nanocrystalline cellulose (NCC) is demonstrated as a renewable dopant and stabilizer for PEDOT, forming bio-based hybrids with competitive photoelectrochemical performance. Two crystalline allomorphs, NCC Type I and NCC Type II, were compared as templates for aqueous oxidative polymerization of EDOT, producing stable dispersions of PEDOT nanoparticles (50–100 nm) electrostatically anchored to the NCC surface. Spectroscopic and thermal analyses revealed that the higher ester sulfate content and distinct morphology of NCC-II promoted enhanced polaron stabilization and 10–15% higher PEDOT incorporation compared to NCC-I. FTIR and UV–vis spectroscopy showed more pronounced polaronic bands for PEDOT:NCC-II hybrids, evidencing enhanced charge delocalization and doping. Optimal performance was achieved for the PEDOT:NCC-II (50 : 50) composition, which formed stable, conductive networks and served as an efficient hole-transport layer in poly(3-hexylthiophene)-based photoelectrochemical devices. These bio-based electrodes achieved photocurrent densities above 18 µA cm−2, matching or exceeding PEDOT:PSS reference, and maintained stable operation over 300 s of cycling (>10 light/dark cycles at 0.3 Hz) with reproducible ON/OFF photoresponse. These findings establish nanocellulose-doped PEDOT as a sustainable alternative for next-generation optoelectronic interfaces., Funding from Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grants PID2022-139671OB-I00 and PID2023-147116OB-I00, as well as from the Gobierno de Aragón (DGA) under projects in priority lines and of a multidisciplinary nature (project grant PROY_T41_24) and T03_23R (Grupos de Investigación Reconocidos), is acknowledged. A. D.-A and B. L.-B. acknowledges the great momentum, hired under the Generation D initiative, promoted by Red.es, an organisation attached to the Ministry for Digital Transformation and the Civil Service, for the attraction and retention of talent through grants and training contracts, financed by the Recovery, Transformation and Resilience Plan through the European Union's Next Generation funds ID: MMT24-IMSE,CNM-02., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hidrogeles y aerogeles de nanocristales de celulosa y de quitina como precursores de carbones porosos nanoestructurados

  • Güemes, Lucas
  • Calvo Peña, Víctor
  • Maya Segura, Vanessa B.
  • Pires, Elísabet
  • Pozo Gonzalo, Cristina
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • García-Bordejé, José Enrique
  • González Domínguez, José Miguel
Trabajo presentado en la XVII Reunión del Grupo Español del Carbón, celebrada en Zaragoza del 19 al 22 de octubre de 2025., Proyecto PID2022-139671OB-100 y PID2023-147116OB-I00 financiada por MCIN/AEI/10.13039/501100011033 y “FEDER Una manera de hacer Europa”; Grupo de Investigación Reconocido T03_23R del Gobierno de Aragón (DGA); Proyectos de I+D+i en líneas prioritarias y de carácter multidisciplinar PROY_T41_24 (DGA)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Towards sustainable TiO2 photoelectrodes based on cellulose nanocrystals as a processing adjuvant

  • Martínez-Barón, C.
  • Calvo, V.
  • Hernández-Ferrer, J.
  • Villacampa, B.
  • Ansón-Casaos, A.
  • González-Domínguez, J. M.
  • Maser, W. K.
  • Benito, A. M.
Photoelectrodes of TiO2 in the form of films are commonly fabricated using screen printing techniques, employing viscous commercial TiO2 pastes. However, these pastes comprise environmentally unfriendly, multicomponent formulations designed to manufacture the photoactive TiO2 nanoparticles. To strive for sustainable processing and pave the way for the use of liquid-phase film processing technologies, the inherent limited water dispersibility of TiO2 nanoparticles must be overcome. In this study, we show that cellulose nanocrystals, produced via an environmentally benign one-pot hydrolysis process, enable the preparation of stable TiO2 water dispersions. The remarkable stability of these dispersions, evidenced by their outstanding ξ-potential values of −34 mV, facilitates the fabrication of macroporous TiO2 photoactive films throughout spray coating. Employed as photoanodes in a photoelectrochemical cell, our TiO2 photoanodes are compared with conventional TiO2 electrodes obtained from commercial pastes under water splitting conditions. Interestingly, our photoanodes reveal a remarkable three-fold enhancement of the photocurrent performance (132 vs. 46 μA cm−2) and a four-fold increase in the on–off response rate (4 vs. 1 s). These findings underscore the valuable role of cellulose nanocrystals as a green processing asset for achieving TiO2 water dispersions. Moreover, they serve as sacrificial adjuvants for preparing highly macroporous and functional film photoelectrodes, representing a significant step forward in the pursuit of sustainable and efficient materials processing.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Carbon nanomaterials-Based Inks and Electrodes Using Chitin Nanocrystals

  • Calvo, Víctor
  • Martínez-Barón, Carlos
  • Vázquez-Conejo, Benjamín
  • Domínguez-Alfaro, Antonio
  • Paleo, Antonio J.
  • Villacampa, Belén
  • Ansón-Casaos, Alejandro
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González-Domínguez, José M.
Dispersing 1D carbon nanomaterials (CNMs) for film processing traditionally relies on surfactants or organic solvents. These methods, however, raise environmental concerns and can negatively impact the final properties of the CNMs. In this work we demonstrate that chitin nanocrystals (ChNCs) synthesized via acid hydrolysis provide a greener pathway for the development of waterborne CNMs-based inks, including single-walled carbon nanotubes, multiwalled carbon nanotubes, and carbon nanofibers. Various concentrations of ChNCs were mixed with each type of CNM to maximize the CNM concentration within the ink. In-depth characterization of the CNM/ChNC inks preceded their processing into supported conductive films by spray-coating. A subsequent thermal treatment of ChNCs at 450 °C leads to the efficient removal of ChNC and results in a significant enhancement of the electrical conductivity. Moreover, freeing the CNMs network structure contributes to increased electrochemical performance of the treated films, as expressed by improved Faradaic charge transfer efficiencies and kinetics reflected by 1 order of magnitude reduced rate constants, when tested with various redox probes. Our findings highlight the potential of ChNCs as a sustainable processing adjuvant of CNMs, leading to electrically conductive electrodes with suitable electrochemical properties for their use in diverse devices and applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hybrids of Deep HOMO Organic Cyanoacrylic Acid Dyes and Graphene Nanomaterials for Water Splitting Photoanodes

  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Orduna, Jesús
  • Villacampa, Belén
  • Blesa, María-Jesús
Dye-sensitization is a promising strategy to improve the light absorption and photoactivity abilities of wide-bandgap semiconductors, like TiO2. For effective water-splitting photoanodes with no sacrificial agents, the electrochemical potential of the dye must exceed the thermodynamic threshold needed for the oxygen evolution reaction. This study investigates two promising organic cyanoacrylic dyes, designed to meet that criterion by means of theoretical calculations. Both yellow-colored dyes were synthesized and characterized by optical and photoelectrochemical techniques, demonstrating strong light absorption in the visible region, suitable experimental reduction potentials, and adsorption from the organic solvent onto mesoporous TiO2 layers. In addition, to promote immobilization in aqueous electrolytes, the dyes were hybridized with graphene oxide or multi-walled carbon nanotubes. Photoelectrochemical analysis of the dye-sensitized photoelectrodes demonstrated efficient charge transfer from the dyes to the TiO2 photoanode under simulated solar light. While the starting photocurrent notably surpassed the blank TiO2, a subsequent decay points to kinetic obstacles that still need to be overcome.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Fabrication of α-Fe<sub>2</sub>O<sub>3</sub> Nanoparticles/g-C<sub>3</sub>N<sub>4</sub> Direct Z-Scheme Heterojunction of Durable Photocatalytic Activity

  • Galán-González, Alejandro
  • Fernández, Isaías
  • Zaluzec, Nestor J.
  • Cambré, Sofie
  • Arenal, Raul
  • Benito, Ana M.
  • Maser, Wolfgang K.
The fabrication of a nanohybrid photocatalyst that combines α-Fe2O3 nanoparticles with graphitic carbon nitride (g-C3N4) is reported. The ensuing direct Z-scheme heterojunction greatly boosts the photocatalytic activity of the α-Fe2O3/g-C3N4 nanohybrids. This results in organic dye degradation rates more than two times higher than its individual components, promoted by the efficient charge separation and transfer of the Z-scheme heterojunction mechanism of the nanohybrid photocatalyst. In addition, recyclability tests show an outstanding stability of the nanohybrids spanning five consecutive dye degradation experiments, during which the degradation rate is slightly improved. The origin of the improved photocatalytic performance of the nanohybrid lies in the intimate interaction between α-Fe2O3 and g-C3N4 afforded by the two-step fabrication process, which enables the direct and controlled growth of α-Fe2O3 nanoparticles on g-C3N4. A first ultrasound impregnation step promotes the effective anchoring of stable Fe species via Fe−N and C−N/C−O bonding, while a second microwave phase conversion step induces the subsequent growth of α-Fe2O3 nanoparticles on the g-C3N4 sheets. Careful control of the FeCl3 precursor concentration up to a threshold value of 0.25 M during impregnation enables complete control over their size and phase. This approach clearly highlights the benefits of microwave reactor systems in the fabrication of hematite-based Z-scheme photocatalytic, overcoming the limitations of conventional thermal treatment technology.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

3-component (N, Fe, Co) atomically dispersed ORR catalysts prepared by laser-driven decomposition of organic precursors

  • Pakrieva, Ekaterina
  • Hernandez-Ferrer, Javier
  • Martinez, Gema
  • Balas, Francisco
  • García-Bordeje, Enrique
  • Anson-Casaos, Alejandro
  • Simonelli, Laura
  • Bartolome, Fernando
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Hueso, Jose L.
  • Santamaria, Jesus
The sluggish kinetics of the oxygen reduction reaction (ORR) remain a key bottleneck for the commercialization of proton exchange membrane fuel cells (PEMFCs), driving the search for efficient, non-precious metal catalysts. Herein, we present a laser-assisted pyrolysis strategy for the synthesis of nitrogen-doped carbon (NC) materials, both metal-free and containing atomically dispersed Fe and Co, using aerosolized phthalocyanine precursors and a near-instantaneous rapid decomposition under a high-energy laser beam, while preventing metal aggregation. A single-step post-synthetic thermal activation under an NH₃/N₂ atmosphere further tailors the textural and surface properties, without requiring ammonia co-feeding during laser pyrolysis, acid etching, or multiple treatments, marking a significant improvement over our previously reported single atom (Fe-N/C) protocols. The resulting Fe_Co/NC_tr catalyst exhibits high specific surface area, enhanced microporosity, improved graphitization, and increased abundance of electrochemically beneficial nitrogen sites. Compared to our earlier reported Fe–N/C catalysts, Fe_Co/NC_tr delivers significantly higher limiting current densities and enhanced durability in alkaline media. Overall, the developed Fe_Co/NC catalyst exhibits good ORR catalytic activity and outstanding long-term stability in alkaline media, comparable to the state-of-the-art commercial Pt/C catalysts. Cyanide poisoning tests confirm the essential role of atomically dispersed Fe2+ and Co2+ as active ORR sites.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The role of mild microwave irradiation in liquid-phase graphene oxide reduction toward aqueous dispersions and conductive films

  • Benito, A.M.
  • Galán-González, A.
  • Arenal, R.
  • Ansón-Casaos, A.
  • Maser, W.K.
The scalable and sustainable production of high-quality, solution-processable graphene materials remains a central challenge in nanomaterial research. This study investigates the reduction of graphene oxide (GO) in aqueous dispersions using low-power microwave (MW) irradiation and conventional thermal reflux, comparing four common chemical reductants, ascorbic acid, glucose, hydrazine, and sodium borohydride, alongside a reductant-free route. MW irradiation at 200 W induces rapid deoxygenation and enhancement of sp2-domain signatures within seconds, whereas reflux requires extended heating to achieve comparable effects. XPS and Raman analyses reveal that MW treatment promotes a more uniform reduction across reductants and leads to significantly larger apparent crystallite sizes (La) than reflux. Importantly, although chemical reductants remain active under MW conditions, their influence on structural reorganization and electrical performance is considerably diminished, demonstrating that MW field itself governs defect elimination and sp2-domain enrichment under these mild aqueous conditions. The reductant-free MW route yields the highest conductivity (88.4 S/m for 150 nm films) and the largest sp2-domains among all samples. Combined spectroscopic, electrical, and electronic microscopy evidence supports a mechanism in which MW irradiation selectively removes highly defective, oxygen-rich, and sp3-hybridized regions rather than reconstructing the graphene lattice, thereby enriching the remaining framework in extended sp2 networks. Overall, these results position mild MW irradiation as a rapid, and scalable strategy for producing structurally enhanced, water-dispersible rGO dispersions suitable for solution-processed graphene films.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Carbon nanotube film electrodes enabled by nanostructured biopolymers through aqueous processing

  • Martínez-Barón, Carlos
  • Calvo, Víctor
  • Álvarez-Sánchez, Miguel Ángel
  • Pascual, F. Javier
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • Ansón-Casaos, Alejandro
  • González-Domínguez, José Miguel
Processing carbon nanotubes (CNTs) into conductive films via liquid-phase is highly attractive for the fabrication of electronic and electrochemical device components. However, conventional deposition methods usually suffer from several limitations, including environmental concerns, loss of intrinsic properties, and poor reproducibility. Nanostructured biopolymers (NBs), such as cellulose (CNCs) and chitin (ChNCs) nanocrystals, offer an environmentally friendly strategy for dispersing CNTs in water alternative to organic solvents, surfactants or chemical functionalization. In this work, we present the first direct comparison of conductive and electroactive films resulting from using CNCs and ChNCs as dispersing agents for both single-walled and multi-walled CNTs. The as-made aqueous dispersions are used as inks to fabricate CNT/NB films via spray coating, achieving excellent homogeneity, controllable film thickness, and sheet resistances mostly below 130 Ohm Sq-1. Furthermore, we demonstrate that postdeposition thermal treatment at 450 1C in an inert atmosphere effectively pyrolyzes the non-conductive NB matrix while increasing contacts between CNTs in the network, leading to enhanced electrical conductivities and lectrochemically active surface areas. These findings highlight NBs as greener processing agents for the formulation of waterborne CNT inks and emphasize their relevance for the controlled and sustainable fabrication of conductive films and electrodes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tuning 2e− and 4e− oxygen reduction pathways in laser-driven FeC electrocatalysts for H2O2 production and Zn–air batteries

  • Pakrieva, Ekaterina
  • Hernández-Ferrer, Javier
  • Rueda-Flores, Ana
  • Balas, Francisco
  • García-Bordeje, Enrique
  • Ansón-Casaos, Alejandro
  • Usoltsev, Oleg
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Hueso, Jose L.
Electrocatalytic oxygen reduction plays a central role in electrochemical energy technologies and in the production of hydrogen peroxide. Achieving selective control over the two-electron (2e−) and four-electron (4e−) oxygen reduction reaction (ORR) pathways within a single catalyst platform remains challenging. Here, we report a laser-driven synthesis of Fesingle bondC nanostructures that enables tunable ORR selectivity through controlled post-treatment. Air annealing at 300 °C yields high H2O2 selectivity (~75% at 0.65 V vs RHE), attributed to oxygen-rich groups and well-developed mesoporosity. Notably, with an optimized 2-electron catalyst, 80 ppm of H2O2 with 94% faradaic efficiency was achieved after 24 h of electrolysis. In contrast, an ammonia based (NH3/N2) treatment at 900 °C promotes the formation of a microporous structure and the incorporation of nitrogen species, resulting in selective water production (~86% at 0.65 V vs RHE). The 4-electron catalyst delivers power and stability comparable to Pt/GC in a primary zinc–air battery. These findings demonstrate a practical approach for tuning ORR selectivity within a Fe-containing carbon-based platform, using scalable processing and trace Fe contents (<0.1 wt%) with Fe present as atomically dispersed sites, limiting leaching and Fenton-type reactions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Quantitative correlation between cyclic voltammetry and electrochemical impedance spectroscopy models on TiO2 film electrodes

  • Ansón-Casaos, Alejandro
  • Ciria, José C.
  • Esteban-Tello, Pedro
  • Galán-González, Alejandro
  • Hernández-Ferrer, Javier
  • Maser, Wolfgang K.
  • Benito, Ana M.
Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) are widely used to characterize semiconductor electrodes, yet their quantitative equivalence is not often established. Here, we introduce a model framework that clarifies when CV and EIS probe the same physical processes and when they diverge on TiO2 film photoelectrodes with controlled thickness and morphology. EIS measurements are registered at different potentials, covering the whole CV window, and show a progressive evolution. In the general case, outside the charge-accumulation regime, the low-frequency limit of EIS converges quantitatively with a density-of-states-based CV description, demonstrating that both techniques capture identical electronic responses. At more cathodic potentials, systematic deviations arise: EIS yields larger capacitances and lower Faradaic resistances than CV. These discrepancies possibly originate from the different timescales of the techniques, as the longer polarization of EIS may activate slow electrochemical processes that are kinetically inaccessible during CV. The divergence between CV and EIS therefore suggests an onset for different charge transport regimes. In this way, the proposed framework provides a predictive diagnostic tool for TiO2 film electrodes, supporting a consistent interpretation and cross-validation of classical CV and EIS data.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Bottom-up assembly of cellulose nanocrystals as a green entry to structured functional carbons

  • Güemes, Lucas
  • Calvo, Víctor
  • Maya-Segura, Vanessa B.
  • Pires, Elísabet
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • García-Bordejé, Enrique
  • González-Domínguez, José M.
The bottom-up assembly of cellulose nanocrystals (CNCs) into porous scaffolds offers a sustainable route to translate their intrinsic properties into functional 3D materials. This strategy enables precise control over porous architectures, unlocking opportunities for high-performance materials tailored to specific applications. Here, we present the fabrication of structured carbons derived from nanocellulose precursors. CNCs are isolated from cellulosic feedstock in type-I and type-II crystalline allomorphs via a one-pot synthesis process followed by minimal processing steps. The resulting aqueous CNC colloids self-assemble into cross-linked hydrogels through controlled hydrothermal aggregation, followed by lyophilization to produce macroporous aerogels (bulk porosities up to 98%). Each allomorph exhibits distinct aggregation behavior, explored for the first time with type-II CNCs. As proof of concept, these aerogels undergo pyrolysis at varying temperatures and subsequent sulfonation, yielding highly porous carbons functionalized with sulfonic acid groups (functionalization degree of ca. 2400 μmol·g−1). The resulting materials combine macroporosity from hydrothermal assembly with microporosity generated during pyrolysis and sulfonation, forming a hierarchical structure ideal for catalytic applications. Their performance is demonstrated in solketal synthesis (yielding ∼90% of solketal in consecutive cycles after 4 h at room temperature) positioning CNC-based sulfonated aerogels as a greener alternative to conventional Brønsted acid catalysts and surpassing classical activated carbons in sustainability and design.