Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Upgrading Recycled Polypropylene from Textile Wastes in Wood Plastic Composites with Short Hemp Fiber

  • Burgada, Francisco
  • Fages, Eduardo
  • Arrieta, Marina P.
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Fenollar, Octavio|||0000-0003-4323-7414
[EN] This research reports the manufacturing and characterization of green composites made from recycled polypropylene obtained from the remnants of polypropylene non-woven fabrics used in the textile industry and further reinforced with short hemp fibers (SHFs). To improve the interaction of the reinforcing fibers with the recycled polymeric matrix, two types of compatibilizing agents (maleic anhydride grafted, PP-g-MA, and maleinized linseed oil, MLO) were added during melt-processing, the percentage of which had to remain constant concerning the amount of fiber loading to ensure complete reactivity. Standardized test specimens were obtained by injection molding. The composites were characterized by mechanical (tensile, impact, and hardness), thermal (DSC, TGA), thermomechanical, FTIR, and FESEM microscopy tests. In addition, color and water uptake properties were also analyzed. The results show that the addition of PP-g-MA to rPP was satisfactory, thus improving the fiber-matrix interaction, resulting in a marked reinforcing effect of the hemp fibers in the recycled PP matrix, which can be reflected in the increased stiffness of the samples. In parallel to the compatibilizing effect, a plasticizing effect was obtained by incorporating MLO, causing a decrease in the glass transition temperature of the composites by approximately 6 °C and an increase in ductility compared to the unfilled recycled polypropylene samples., AITEX wants to thank the European Regional Development Fund (ERDF) from the European Union for co-funding the project "NABITEX-Innovative technical textiles based on SUDOE natural fibers to be applied in Habitat Sector" through the Interreg SUDOE Program (SOE2/P1/P0524). AITEX wants to acknowledge that the MELTEX project (CIRCULAR ECONOMY APPLIED TO TEXTILEWASTE OF THERMOPLASTIC ORIGIN) was funded by the Conselleria d'Economia Sostenible, Sectors Productius, Comerc i Treball de la Generalitat Valenciana, through IVACE and was co-funded by ERDF from the European Commission within the framework of the Operational Programme FEDER for the Comunitat Valenciana 2014-2020 (IMAMCI/2020/1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Clasificación de objetos usando percepción bimodal de palpación única en acciones de agarre robótico, Object classification using bimodal perception data extracted from single-touch robotic grasps

  • Velasco, E.
  • Zapata-Impata, B.S.
  • Gil, P.
  • Torres, F.
[ES] Este trabajo presenta un método para clasificar objetos agarrados con una mano robótica multidedo combinando en un descriptor híbrido datos propioceptivos y táctiles. Los datos propioceptivos se obtienen a partir de las posiciones articulares de la mano y los táctiles se extraen del contacto registrado por células de presión instaladas en las falanges. La aproximación propuesta permite identificar el objeto aprendiendo de forma implícita su geometría y rigidez usando los datos que facilitan los sensores. En este trabajo demostramos que el uso de datos bimodales con técnicas de aprendizaje supervisado mejora la tasa de reconocimiento. En la experimentación, se han llevado a cabo más de 3000 agarres de hasta 7 objetos domésticos distintos, obteniendo clasificaciones correctas del 95%con métrica F1, realizando una única palpación del objeto. Además, la generalización del método se ha verificado entrenando nuestro sistema con unos objetos y posteriormente, clasificando otros nuevos similar, [EN] This work presents a method to classify grasped objects with a multi-fingered robotic hand combining proprioceptive and tactile data in a hybrid descriptor. The proprioceptive data are obtained from the joint positions of the hand and the tactile data are obtained from the contact registered by pressure cells installed on the phalanges. The proposed approach allows us to identify the grasped object by learning the contact geometry and stiness from the readings by sensors. In this work, we show that using bimodal data of different nature along with supervised learning techniques improves the recognition rate. In experimentation, more than 3000 grasps of up to 7 dierent domestic objects have been carried out, obtaining an average F1 score around 95 %, performing just a single grasp. In addition, the generalization of the method has been verified by training our system with certain objects and classifying new, similar ones without any prior knowledge., Este trabajo ha sido financiado con Fondos Europeos de Desarrollo Regional (FEDER), Ministerio de Economía, Industria y Competitividad a través del proyecto DPI2015-68087-R y la ayuda pre-doctoral BES-2016-078290, y también gracias al apoyo de la Comisión Europea y del programa Interreg V. Sudoe a través del proyecto SOE2/P1/F0638.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development and Characterization of Environmentally Friendly Wood Plastic Composites from Biobased Polyethylene and Short Natural Fibers Processed by Injection Moulding

  • Dolza, Celia
  • Fages, Eduardo
  • Gonga, Eloi
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Balart, Rafael|||0000-0001-5670-7126
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
[EN] Environmentally friendly wood plastic composites (WPC) with biobased high density polyethylene (BioHDPE) as the polymer matrix and hemp, flax and jute short fibers as natural reinforcements, were melt-compounded using twin-screw extrusion and shaped into pieces by injection molding. Polyethylene-graft-maleic anhydride (PE-g-MA) was added at two parts per hundred resin to the WPC during the extrusion process in order to reduce the lack in compatibility between the lignocellulosic fibers and the non-polar polymer matrix. The results revealed a remarkable improvement of the mechanical properties with the combination of natural fibers, along with PE-g-MA, highly improved stiffness and mechanical properties of neat BioHDPE. Particularly, hemp fiber drastically increased the Young¿s modulus and impact strength of BioHDPE. Thermal analysis revealed a slight improvement in thermal stability with the addition of the three lignocellulosic fibers, increasing both melting and degradation temperatures. The incorporation of the fibers also increased water absorption due to their lignocellulosic nature, which drastically improved the polarity of the composite. Finally, fire behavior properties were also improved in terms of flame duration, thanks to the ability of the fibers to form char protective barriers that isolate the material from oxygen and volatiles., : This research was funded by the Ministry of Science, Innovation, and Universities (MICIU) project number MAT2017-84909-C2-2-R. AITEX wants to thank the European Regional Development Fund (ERDF) from the European Union for co-funding the project NABITEX Innovative technical textiles based on SUDOE natural fibers to be applied in Habitat Sector through the Interreg SUDOE Program (SOE2/P1/P0524). L.Q.-C. wants to thank Universitat Politècnica de València for his post-doctoral PAID-10-20 grant from (SP20200073). J.G.-C. wants to thank Universitat Politècnica de València for his FPI grant from (SP20200080).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photocatalytic water gas shift using visible or simulated solar light for the efficient, room-temperature hydrogen generation

  • Sastre Calabuig, Francesc
  • Oteri, Marica
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
Gold nanoparticles supported on P25 TiO2 act as highly efficient photocatalysts for promoting the simultaneous H2O reduction to H-2 and CO oxidation to CO2. This photocatalytic process can be performed using simulated solar light as well as light from a LED quasi monochromatic centred at 450 nm, indicating that not only UV but also visible light promotes the reaction. This novel photocatalytic reaction corresponds to the water gas shift which is an endothermic process that is currently carried out on a large industrial scale at temperatures about 350 degrees C. In contrast, the photocatalytic process is performed at ambient temperature with no other energy requirement than sunlight. Other related TiO2 and CeO2 photocatalysts containing noble metals (Pt or Pd) behave similarly, but with lower efficiency both in the UV and in the visible region than Au/TiO2., Financial support from the Spanish Ministry of Economy and Competitiveness through the Severo Ochoa program as well as operating grants (Consolider Ingenio Multicat and CTQ-2012-363531) is gratefully acknowledged. Thanks are due to the EU for partial funding of the networking through the TRAIN2 SUDDOE project. M.O. thanks the region of Calabria for financial support during her stay at Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Effect of Varying the Amount of Short Hemp Fibers on Mechanical and Thermal Properties of Wood Plastic Composites from Biobased Polyethylene Processed by Injection Molding

  • Dolçà, Celia
  • Fages, Eduardo
  • Gonga, Eloi
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Balart, Rafael|||0000-0001-5670-7126
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
[EN] Biobased HDPE (bioHDPE) was melt-compounded with different percentages (2.5 to 40.0 wt.%) of short hemp fibers (HF) as a natural reinforcement to obtain environmentally friendly wood plastic composites (WPC). These WPC were melt-compounded using a twin-screw extrusion and shaped into standard samples by injection molding. To improve the poor compatibility between the high non-polar BioHDPE matrix and the highly hydrophilic lignocellulosic fibers, a malleated copolymer, namely, polyethylene-graft-maleic anhydride (PE-g-MA), was used. The addition of short hemp fibers provided a remarkable increase in the stiffness that, in combination with PE-g-MA, led to good mechanical performance. In particular, 40 wt.% HF drastically increased the Young¿s modulus and impact strength of BioHDPE, reaching values of 5275 MPa and 3.6 kJ/m2, respectively, which are very interesting values compared to neat bioHDPE of 826 MPa and 2.0 kJ/m2. These results were corroborated by dynamic mechanical thermal analysis (DMTA) results, which revealed a clear increasing tendency on stiffness with increasing the fiber loading over the whole temperature range. The crystal structure was not altered by the introduction of the natural fibers as could be seen in the XRD patterns in which mainly the heights of the main peaks changed, and only small peaks associated with the presence of the fiber appeared. Analysis of the thermal properties of the composites showed that no differences in melting temperature occurred and the non-isothermal crystallization process was satisfactorily described from the combined Avrami and Ozawa model. As for the thermal degradation, the introduction of HF resulted in the polymer degradation taking place at a higher temperature. As for the change in color of the injected samples, it was observed that the increase in fiber generated a clear modification in the final shades of the pieces, reaching colors very similar to dark woods for percentages higher than 20% HF. Finally, the incorporation of an increasing percentage of fibers also increased water absorption due to its lignocellulosic nature in a linear way, which drastically improved the polarity of the composite., Project with grant number PID2020-116496RB-C22 funded by the Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 and grant number AICO/2021/025 funded by Generalitat Valenciana. European Regional Development Fund (ERDF) from the European Union for co-funding the project NABITEX Innovative technical textiles based on SUDOE natural fibers to be applied in Habitat Sector through the Interreg SUDOE Program (SOE2/P1/P0524) and CDTI (Centro para el Desarrollo Tecnológico Industrial) within the framework of grants for Technological Centres of Excellence Cervera (CER-20211013).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of pretreatments on commercial diamond nanoparticles on the photocatalytic activity of supported gold nanoparticles under natural Sunlight irradiation

  • Sempere Aracil, David
  • Dancikova, Mariana
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
Fenton-treated diamond (D) nanoparticles (NPs) are suitable support of gold to promote the wet peroxidation of phenol by H2O2. One of the drawbacks of this catalyst is the need of the pretreated commercial D NPs with a large excess of H2O2 and Fe(II) salts to remove the accompanying soot matter and introduce surface single bondOH groups on D. This process generates a large amount of waste waters and consumes large quantities of reagents, being desirable to develop alternative pretreatments for commercial D NPs. In the present manuscript we describe that a light combustion of the soot matter in a furnace under controlled temperature and time leads to a D support that after annealing at 500 ̊C under hydrogen affords a modified D material that is suitable as support of gold. We have found that annealing with hydrogen produces more efficient D samples than those without annealing or submitted to annealing under nitrogen. Characterization of the samples has shown that hydrogen annealing reduces surface Cdouble bond; length as m-dashO bonds to alcohols that are beneficial for anchoring gold nanoparticles. In this way, the resulting gold catalyst can set off the disappearance of phenol in water at pH 4 with only 2.6 equiv. of H2O2 assisted by Sunlight., Financial support by the Spanish Ministry of Economy and Competitiveness (MINECO, Severo Ochoa program and CTQ 2012-32316) and Universidad Politecnica de Valencia (PAID-06-11, no 2095) is gratefully acknowledged. We thank also to the EU funded TRAIN2 project for the partial funding of networking. SN thanks to the UPV for a lecturer contract.
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Life Cycle Assessment of the Separation and Recycling of Fluorinated Gases Using Ionic Liquids in a Circular Economy FrameworkClick to copy article link

  • Jovell, Daniel
  • Pou, Josep Oriol
  • Llovell Ferret, Félix Lluís
  • González Olmos, Rafael
The stricter regulation regarding the use of fluorinated gases (F-gases), as a consequence of their high Global Warming Potential (GWP), represents a challenge for the refrigeration industry. The design of alternatives requires the recycling of the low to moderate GWP compounds from current refrigerant blends. However, there is not a developed and standardized technology available to recover them, and once the life cycle of the refrigeration equipment has ended, most gases are incinerated. Fluorinated ionic liquids (FILs) can effectively perform as absorbents to the complex separation of F-gas mixtures. In this work, a methodology based on the COSMO-RS thermodynamic package integrated into an Aspen Plus process simulator was used to evaluate the performance of an FIL to recover difluoromethane (R-32) from the commercial blend R-407F. The environmental sustainability of the recovery process (circular economy scenario) was analyzed with a life cycle assessment (LCA) approach, comparing the obtained results with the conventional R-32 production (benchmark scenario). The results reveal a 30% recovery of 98 wt % R-32 suitable for further reuse with environmental load reduction in the 86–99% range compared to the R-32 production. This study can guide the development of new F-gas recovery technologies to improve the environmental impacts of these compounds from a circular economy perspective., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

A consistent thermodynamic molecular model of n-hydrofluoroolefins and blends for refrigeration applications, Modèle moléculaire thermodynamique cohérent des n-hydrofluoroléfines et de leurs mélanges pour des applications dans le domaine du froid

  • Llovell Ferret, Félix Lluís
  • Albà, Carlos G.
  • Vega, Lourdes F.
This work presents a thermodynamic model that characterizes 4th-generation hydrofluoroolefins (HFOs)-based refrigerants with the molecular-based soft-SAFT equation of state (Blas and Vega, 1998) as well as its application in process simulations for a selected refrigeration application. The evaluation of the HFOs has been done building on a molecular model transferred from the equivalent hydrofluorocarbons (HFCs), taking advantage of the similarities between the two chemical families. The model has been used to calculate all thermophysical properties of the selected HFOs relevant for their application as refrigerants, including the saturated density, vapor pressure, heat capacity, speed of sound, surface tension and viscosity, providing good agreement with experimental available data. In addition, phase equilibria, interfacial behavior and viscosity calculations have been performed for blends between HFCs and the two most common HFOs, R1234yf and R1234ze(E). The obtained thermodynamic properties have been used for a process simulation of a vapor compression refrigeration system, comparing the 3rd generation refrigerant R410A with these 4th generation blends, including the Coefficient of Performance for different cases, in order to establish the best alternative to R410A. Overall, this work shows how molecular modeling tools can be used now a day, as a complementary tool to generate reliable data for process simulation, in this case related to the search for alternative refrigerants.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Portable Instrumental Odour Monitoring System for Air Quality Monitoring by Citizens in Outdoor Environments

  • Palomeque-Mangut, Sergio
  • Meléndez, Félix
  • Gómez-Suarez, Jaime
  • Arroyo, Patricia
  • Santos, José Pedro
  • Lozano, Jesús
6 páginas, 6 figuras, 1 tabla, Air pollution is a major contributor to the global disease burden. Scientific literature has been consistent for the past decades, exposing the dangers behind hazardous air quality in both indoor and outdoor environments, and its impact on human health and ecosystems. Conventional monitoring stations are expensive and bulky, limiting the spatiotemporal resolution of the provided data. For this reason, administrations are interested in adding low-cost sensors to the monitoring network, and thus obtaining measures from multiple sources to enhance the network’s density and coverage. In this work, we present a portable Instrumental Odour Monitoring System (IOMS) consisting of an electronic device with an array of metal oxide semiconductor (MOS) gas and Particle Matter sensors connected through Bluetooth with a smartphone with our own developed app that gathers data and sends it to a cloud. We tested the device in two different experimental setups, the first with laboratory-controlled conditions and the second in field, creating a network with the help of volunteers in the city of Barcelona., Authors want to thank the European Union for supporting NanoSen-AQM (SOE/P1/E0569) project and volunteers from the Metropolitan Area of Barcelona for using our devices.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Performance of the IBER and HEC-HMS models for predicting peak discharge after wildfires in northwest Spain

  • Míguez, Clara
  • Novo, Ana
  • Kampf, Stephanie
  • Fernández, Cristina
9 pages, 6 tables, 5 figures, Data will be available upon reasonable request., The flooding and increased runoff that frequently occur after forest fires can have devastating impacts. Hydrological models that simulate processes in natural systems can help to predict them. In this study we measured peak discharge and time to peak in three small burned catchments in NW Spain and compared the values with corresponding estimates provided by the IBER and HECHMS models. In total, 22 events were selected for study in the three catchments, and the performance of the models was evaluated for the whole dataset and by grouping the events according to the value of the standardized precipitation index. Peak discharge was underestimated by both models, while estimates of time to peak were acceptable. The models performed better when only rainfall events with a standardized precipitation index > 0 were considered. Sensitivity analysis showed that rainfall is more influential on model predictions than curve number or roughness coefficient., This research was funded by the EU Interreg-Sudoe programme through project EPyRIS [SOE2/P5/E0811]; and the Spanish Research Agency of the Spanish Ministry of Science and Innovation through projects [ENFIRES-NW-PID2020-116494RR-C42 and TED2021-129451B-C43-IRESTORM-NW], Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Origin of inverse Rashba-Edelstein effect detected at the Cu/Bi interface using lateral spin valves

  • Isasa, M.
  • Martínez-Velarte, M.C.
  • Villamor, E.
  • Magén, C.
  • Morellón, L.
  • De Teresa, J.M.
  • Ibarra, M.R.
  • Vignale, G.
  • Chulkov, E.V.
  • Krasovskii, E.E.
  • Hueso, L.E.
  • Casanova, F.
The spin transport and spin-to-charge current conversion properties of bismuth are investigated using permalloy/copper/bismuth (Py/Cu/Bi) lateral spin valve structures. The spin current is strongly absorbed at the surface of Bi, leading to ultrashort spin-diffusion lengths. A spin-to-charge current conversion is measured, which is attributed to the inverse Rashba-Edelstein effect at the Cu/Bi interface. The spin-current-induced charge current is found to change direction with increasing temperature. A theoretical analysis relates this behavior to the complex spin structure and dispersion of the surface states at the Fermi energy. The understanding of this phenomenon opens novel possibilities to exploit spin-orbit coupling to create, manipulate, and detect spin currents in two-dimensional systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

CD56+/CD16- Natural Killer cells expressing the inflammatory protease granzyme A are enriched in synovial fluid from patients with osteoarthritis

  • Jaime, P.
  • García-Guerrero, N.
  • Estella, R.
  • Pardo, J.
  • García-Álvarez, F.
  • Martínez-Lostao, L.
Objective: Natural killer (NK) cells have been involved in the pathology of different inflammatory and autoimmune disorders. Inflammation is an important regulator of osteoarthritis (OA), but the molecular and cellular mechanisms regulating this process are not well defined. Design To understand the role of NK cells in OA, we have compared the phenotype (CD56 subsets and perforin and granzyme expression) and cytotoxic function of NK cells in peripheral blood and synovial fluid from patients with OA undergoing total knee arthroplasty. Results: In contrast to peripheral blood lymphocytes (PBLs), the majority of NK cells from the synovial fluid were CD56brightCD16(-) cells. As expected the expression of the cytolytic mediators perforin and granzyme B in CD56brightCD16(-) cells was low and correlated with a poor cytotoxic potential against K562 sensitive target cells. Surprisingly, this low cytotoxic NK cell subset expressed high levels of granzyme A (a protease recently characterized as a key modulator of inflammation in mouse models) in synovial fluid but not in peripheral blood. The presence of the CD56(+)brightCD16(-) cells expressing granzyme A correlated with increased levels of pro-inflammatory cytokines in synovial fluid from OA patients. Conclusion: Our results indicate that NK cells from the synovium of patients with OA, which present an immunoregulatory non-cytotoxic phenotype, show different phenotype comparing with NK cells from peripheral blood, especially expressing granzyme A, a pro-inflammatory molecule which may contribute to the establishment of chronic articular inflammation in this type of patients.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Life Cycle Assessment of the Separation and Recycling of Fluorinated Gases Using Ionic Liquids in a Circular Economy FrameworkClick to copy article link

  • Jovell, Daniel
  • Pou, Josep Oriol
  • Llovell Ferret, Félix Lluís
  • González Olmos, Rafael
The stricter regulation regarding the use of fluorinated gases (F-gases), as a consequence of their high Global Warming Potential (GWP), represents a challenge for the refrigeration industry. The design of alternatives requires the recycling of the low to moderate GWP compounds from current refrigerant blends. However, there is not a developed and standardized technology available to recover them, and once the life cycle of the refrigeration equipment has ended, most gases are incinerated. Fluorinated ionic liquids (FILs) can effectively perform as absorbents to the complex separation of F-gas mixtures. In this work, a methodology based on the COSMO-RS thermodynamic package integrated into an Aspen Plus process simulator was used to evaluate the performance of an FIL to recover difluoromethane (R-32) from the commercial blend R-407F. The environmental sustainability of the recovery process (circular economy scenario) was analyzed with a life cycle assessment (LCA) approach, comparing the obtained results with the conventional R-32 production (benchmark scenario). The results reveal a 30% recovery of 98 wt % R-32 suitable for further reuse with environmental load reduction in the 86–99% range compared to the R-32 production. This study can guide the development of new F-gas recovery technologies to improve the environmental impacts of these compounds from a circular economy perspective., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A consistent thermodynamic molecular model of n-hydrofluoroolefins and blends for refrigeration applications, Modèle moléculaire thermodynamique cohérent des n-hydrofluoroléfines et de leurs mélanges pour des applications dans le domaine du froid

  • Llovell Ferret, Félix Lluís
  • Albà, Carlos G.
  • Vega, Lourdes F.
This work presents a thermodynamic model that characterizes 4th-generation hydrofluoroolefins (HFOs)-based refrigerants with the molecular-based soft-SAFT equation of state (Blas and Vega, 1998) as well as its application in process simulations for a selected refrigeration application. The evaluation of the HFOs has been done building on a molecular model transferred from the equivalent hydrofluorocarbons (HFCs), taking advantage of the similarities between the two chemical families. The model has been used to calculate all thermophysical properties of the selected HFOs relevant for their application as refrigerants, including the saturated density, vapor pressure, heat capacity, speed of sound, surface tension and viscosity, providing good agreement with experimental available data. In addition, phase equilibria, interfacial behavior and viscosity calculations have been performed for blends between HFCs and the two most common HFOs, R1234yf and R1234ze(E). The obtained thermodynamic properties have been used for a process simulation of a vapor compression refrigeration system, comparing the 3rd generation refrigerant R410A with these 4th generation blends, including the Coefficient of Performance for different cases, in order to establish the best alternative to R410A. Overall, this work shows how molecular modeling tools can be used now a day, as a complementary tool to generate reliable data for process simulation, in this case related to the search for alternative refrigerants.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Energy balance and environmental impact analysis of marine microalgal biomass production for biodiesel generation in a photobioreactor pilot plant

  • Sevigné Itoiz, Eva|||0000-0002-7356-4048
  • Fuentes Grunewald, Claudio|||0000-0002-3122-9452
  • Martínez Gasol, Carles|||0000-0003-3002-9229
  • Garcés, Esther|||0000-0002-2712-501X
  • Alacid, Elisabet|||0000-0003-0777-1855
  • Rossi Heras, Sergio|||0000-0003-4402-3418
  • Rieradevall, Joan|||0000-0003-3360-6829
A life cycle assessment (LCA) and an energy balance analysis of marine microalgal biomass production were conducted to determine the environmental impacts and the critical points of production for large scale planning. The artificial lighting and temperature conditions of an indoor bubble column photobioreactor (bcPBR) were compared to the natural conditions of an equivalent outdoor system. Marine microalgae, belonging to the dinoflagellate and raphidophyte groups, were cultured and the results were compared with published LCA data obtained from green microalgae (commonly freshwater algae). Among the species tested, Alexandrium minutum was chosen as the target marine microalgae for biomass production under outdoor conditions, although there were no substantial differences between any of the marine microalgae studied. Under indoor culture conditions, the total energy input for A. minutum was 923 MJ kg¯¹ vs. 139 MJ kg¯¹ for outdoor conditions. Therefore, a greater than 85% reduction in energy requirements was achieved using natural environmental conditions, demonstrating the feasibility of outdoor culture as an alternative method of bioenergy production from marine microalgae. The growth stage was identified as the principal source of energy consumption for all microalgae tested, due to the electricity requirements of the equipment, followed by the construction material of the bcPBR. The global warming category (GWP) was 6 times lower in outdoor than in indoor conditions. Although the energy balance was negative under both conditions, this study concludes with suggestions for improvements in the outdoor system that would allow upscaling of this biomass production technology for outdoor conditions in the Mediterranean.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Environmental consequences of recycling aluminum old scrap in a global market

  • Sevigné Itoiz, Eva|||0000-0002-7356-4048
  • Martínez Gasol, Carles|||0000-0003-3002-9229
  • Rieradevall, Joan|||0000-0003-3360-6829
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
For decades, aluminium recycling was a regional concern traditionally concentrated in the regions with high aluminium demand and a well-organized aluminium recycling industry. Today, however, aluminium scrap is a global raw material commodity. This change has increased the need to analyze the flows of aluminium scrap, as well as to determine the environmental consequences from aluminium recycling. The objective of this work is to determine the environmental consequences of the old scrap aluminium collection for recycling, considering the market interactions. The study focused on Spain as a representative country for Europe. We integrate material flow analysis (MFA) with consequential life cycle assessment (CLCA) in order to determine the most likely destination for the old scrap and the most likely corresponding process affected. Based on this analysis, it is possible to project some scenarios and to quantify the environmental impacts (generated and avoided) associated with aluminium recycling within a global market. From the MFA results, we projected that the demand for aluminium products will be met mainly with an increase in primary aluminium imports, and the excess of old scrap not used in Spain will be exported in future years, mainly to Asia. Depending on the marginal source of primary aluminium considered, the greenhouse gases (GHG) emission estimates varied between -17,088 kg of CO2 eq. t-1 of old scrap collected to -10,305 of CO2 eq. t-1 of old scrap collected for the global or local scenario, respectively. More GHG emissions are avoided with an increase in export flows, but the export of old scrap should be considered as the loss of a key resource, and in the long term, it will also affect the semifinished products industry. Mapping the flows of raw materials and waste, as well as quantifying the environmental impacts derived from recycling, has become an essential prerequisite to consistent development from a linear towards a circular economy.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Determination of the energy and environmental burdens associated to the biological treatment of source-separated municipal solid wastes

  • Colón Jordà, Joan|||0000-0003-1677-7239
  • Cadena, Erasmo|||0000-0003-3628-3041
  • Pognani, Michele
  • Barrena, Raquel|||0000-0002-6077-7765
  • Sánchez, Antoni|||0000-0003-4254-8528
  • Font, Xavier|||0000-0003-4981-7436
  • Artola, Adriana|||0000-0002-0524-2119
Environmental burdens of four different full-scale facilities treating source-separated organic fraction of Municipal Solid Wastes (OFMSW) have been experimentally evaluated. The studied facilities include different composting technologies and also anaerobic digestion plus composting. Home composting, as an alternative to OFMSW management, was also included in the study. Energy (electricity and diesel), water consumption and emissions of volatile organic compounds (VOC), ammonia, methane and nitrous oxide have been measured for each process. Energy consumption ranged between 235 and 870 MJ Mg OFMSW⁻¹ while the emissions of the different contaminants considered per Mg OFMSW were in the range of 0.36-8.9 kg VOC, 0.23-8.63 kg NH₃, 0.34-4.37 kg CH₄ and 0.035-0.251 kg N₂O, respectively. Environmental burdens of each facility are also analyzed from the point of view of process efficiency (i.e. organic matter stabilization degree achieved, calculated as the reduction of the Dynamic Respiration Index (DRI) of the waste treated). This study is performed through two new indices: Respiration Index Efficiency (RIE), which includes the reduction in the DRI achieved by the treatment process and Quality and Respiration Index Efficiency (QRIE), which also includes the quality of the end product. Finally, a Life Cycle Assessment is performed using the Respiration Index Efficiency (RIE) as the novel functional unit instead of the classical LCA approach based on the total mass treated.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Home and vermicomposting as sustainable options for biowaste management

  • Lleó Leida, Thais
  • Albacete, Eloisa
  • Barrena, Raquel|||0000-0002-6077-7765
  • Font, Xavier|||0000-0003-4981-7436
  • Artola, Adriana|||0000-0002-0524-2119
  • Sánchez, Antoni|||0000-0003-4254-8528
Home composting (also known as backyard composting) presents some potential benefits for the industrial treatment of the organic fraction of municipal solid waste or biowaste. Home composting avoids the collection of biowaste, reduces the impurities present in the waste being treated and, consequently, in the resulting compost, and theoretically decreases the material and energy needs of the process. However, self-composting requires a composting bin and pruning waste as bulking material as well as space in a garden or on a roof that is not always available. An alternative for the self-management of biowaste is vermicomposting, which requires less space and no bulking material. Both the home composting and vermicomposting methods were studied over an eight-month period to determine the quality of the compost produced, the capacity of the methodology and the resulting gaseous emissions. The treatment capacity of the composters used in this work was determined on a weekly basis. The vermicomposter had a treatment capacity of 50 g biowaste per L, whereas the home composter had a treatment capacity of 16 g biowaste per L. The home composter required the addition of 6.3 g of bulking agent per L of composter. The quality of the final product, compost, was similar in both cases, with each batch of compost having low metal content and a high degree of stability, with Dynamic Respiration Indices of 0.43 and 0.89 mg O2 g⁻¹ Organic Matter h⁻¹ for compost and vermicompost, respectively. Gaseous emissions from home composters show the presence of 1.3 kg NH₃ Mg⁻¹ biowaste and 1.35 kg CH₄ Mg⁻¹ biowaste, values that are within the range reported in the literature for home and industrial composting, although N2O emissions, 1.16 kg Mg⁻¹ biowaste, were higher. Gaseous emissions from the vermicomposters were lower than from the home composters: 3.33 × 10⁻³, 2.19 × 10⁻³ and 3.66 × 10⁻³ kg of pollutant Mg⁻¹ biowaste for NH₃, CH₄ and volatile organic compounds, respectively. No odours were detected for either system. Home and vermicomposting can be considered suitable alternatives to divert a portion of the biowaste from the traditional waste-management system.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Home composting versus industrial composting, influence of composting system on compost quality with focus on compost stability

  • Barrena, Raquel|||0000-0002-6077-7765
  • Font, Xavier|||0000-0003-4981-7436
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
  • Sánchez, Antoni|||0000-0003-4254-8528
Stability is one of the most important properties of compost obtained from the organic fraction of municipal solid wastes. This property is essential for the application of compost to land to avoid further field degradation and emissions of odors, among others. In this study, a massive characterization of compost samples from both home producers and industrial facilities is presented. Results are analyzed in terms of chemical and respiration characterizations, the latter representing the stability of the compost. Results are also analyzed in terms of statistical validation. The main conclusion from this work is that home composting, when properly conducted, can achieve excellent levels of stability, whereas industrial compost produced in the studied facilities can also present a high stability, although an important dispersion is found in these composts. The study also highlights the importance of respiration techniques to have a reliable characterization of compost quality, while the chemical characterization does not provide enough information to have a complete picture of a compost sample.