Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

2D Phononic crystals: Progress and prospects in hypersound and thermal transport engineering

  • Sledzinska, Marianna
  • Graczykowski, Bartlomiej
  • Maire, Jeremie
  • Chávez-Angel, Emigdio
  • Sotomayor Torres, C. M.
  • Alzina, Francesc
The central concept in phononics is the tuning of the phonon dispersion relation, or phonon engineering, which provides a means of controlling related properties such as group velocity or phonon interactions and, therefore, phonon propagation, in a wide range of frequencies depending on the geometries and sizes of the materials. Phononics exploits the present state of the art in nanofabrication to tailor dispersion relations in the range of GHz for the control of elastic waves/phonons propagation with applications toward new information technology concepts with phonons as state variable. Moreover, phonons provide an adaptable approach for supporting a coherent coupling between different state variables, and the development of nanoscale optomechanical systems during the last decade attests this prospect. The most extended approach to manipulate the phonon dispersion relation is introducing an artificial periodic modulation of the elastic properties, which is referred to as phononic crystal (PnC). Herein, the focus is on the recent experimental achievements in the fabrication and application of 2D PnCs enabling the modification of the dispersion relation of surface and membrane modes, and presenting phononic bandgaps, waveguiding, and confinement in the hypersonic regime. Furthermore, these artificial materials offer the potential of modifying and controlling the heat flow to enable new schemes in thermal management., ICN2 is supported by the Spanish MINECO (Severo Ochoa Centers of Excellence Program under Grant SEV‐2017‐0706), and by the Generalitat de Catalunya (Grant 2017SGR806 and the CERCA Program). B.G. acknowledges the support from the Foundation for Polish Science (POIR.04.04.00‐00‐5D1B/18), Polish National Science Centre (UMO‐2018/31/D/ST3/03882), and ERC AdG SmartPhon (Grant No. 694977)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boosting photoelectrochemical water oxidation of hematite in acidic electrolytes by surface state modification

  • Tang, Peng-Yi
  • Han, Li-Juan
  • Simone Hegner, Franziska
  • Paciok, Paul
  • Biset-Peiró, Martí
  • Du, Hong-Chu
  • Wei, Xian-Kui
  • Jin, Lei
  • Xie, Haibing
  • Shi, Qin
  • Andreu, Teresa
  • Lira-Cantú, Mónica
  • Heggen, Marc
  • Dunin-Borkowski, Rafal E.
  • López, Núria
  • Galán-Mascarós, José Ramón
  • Morante, Joan Ramón
  • Arbiol, Jordi
State-of-the-art water-oxidation catalysts (WOCs) in acidic electrolytes usually contain expensive noble metals such as ruthenium and iridium. However, they too expensive to be implemented broadly in semiconductor photoanodes for photoelectrochemical (PEC) water splitting devices. Here, an Earth-abundant CoFe Prussian blue analogue (CoFe-PBA) is incorporated with core–shell Fe2O3/Fe2TiO5 type II heterojunction nanowires as composite photoanodes for PEC water splitting. Those deliver a high photocurrent of 1.25 mA cm−2 at 1.23 V versus reversible reference electrode in acidic electrolytes (pH = 1). The enhancement arises from the synergic behavior between the successive decoration of the hematite surface with nanolayers of Fe2TiO5 and then, CoFe-PBA. The underlying physical mechanism of performance enhancement through formation of the Fe2O3/Fe2TiO5/ CoFe-PBA heterostructure reveals that the surface states’ electronic levels of hematite are modified such that an interfacial charge transfer becomes kinetically favorable. These findings open new pathways for the future design of cheap and efficient hematite-based photoanodes in acidic electrolytes., This work was supported by the Spanish Ministerio de Economia y Competitividad (MINECO, Grants CTQ2015-71287-R, CTQ2015-71287-R, and CTQ2015-68770-R) and the coordinated Project ValPEC (ENE2017-85087-C3), the BIST Ignite Project inWOC2 and the Generalitat de Catalunya (2017 SGR 90, 2017 SGR 327, 2017 SGR 329, 2017 SGR 1246, and 2017 SGR 1406). ICN2 acknowledges the support from the Severo Ochoa Program (MINECO, Grant SEV-2017-0706). ICN2, ICIQ, and IREC are funded by the CERCA Programme/Generalitat de Catalunya. P.Y.T. acknowledges the scholarship support of DAAD short term grant. H.C.D. acknowledges support from the Deutsche Forschungsgemeinschaft (SFB 917). F.S.H. thanks the “LaCaixa”-Severo Ochoa International Programme (Programa internacional de Becas “LaCaixa”- Severo Ochoa) for a Ph.D. fellowship. P.P. and M.H. thank for the support by the Federal Ministry for Economic Affairs and Energy (BMWi) (Fundingregistration number: 03ET6080E). M.L. thanks the COST Action StableNextSol project MP1307, supported by COST (European Cooperation in Science and Technology). H.X. acknowledges the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295 for the postdoctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Building of a flexible microfluidic plasmo-nanomechanical biosensor for live cell analysis

  • Solis-Tinoco, V.
  • Marquez, S.
  • Quesada-Lopez, T.
  • Villarroya, F.
  • Homs-Corbera, Antoni
  • Lechuga, Laura M.
Biosensor devices can constitute an advanced tool for monitoring and study complex dynamic biological processes, as for example cellular adhesion. Cellular adhesion is a multipart process with crucial implications in physiology (i.e. immune response, tissue nature, architecture maintenance, or behaviour and expansion of tumor cells). This work focuses on offering a controlled methodology in order to fabricate a flexible plasmo-nanomechanical biosensor placed within a microfluidic channel as a new tool for future cell adhesion studies. We designed, fabricated, and optically and mechanically characterized this novel optical biosensor. As a proof-of-concept of its functionality, the biosensor was employed to observe fibroblasts adhesion in a cell culture. The device is configured by an hexagonal array of flexible rigid/soft polymeric nanopillars capped with plasmonic gold nanodisks integrated inside a microfluidic channel. The fabrication employs low-cost and large-scale replica molding techniques using two different polymers materials (EPOTECK OG142 and 310 M). By using those materials the spring constant of the polymer nanopillars (k) can be fabricated from 1.19E-02 [N/m] to 5.35E+00 [N/m] indicating different mechanical sensitivities to shear stress. Therefore, the biosensor has the feasibility to mimic soft and rigid tissues important for the description of cellular nanoscale behaviours. The biosensor exhibits a suitable bulk sensitivity of 164 nm or 206 nm/refractive index unit respectively, depending on the base material. The range of calculated forces goes from ≈1.98 nN to ≈.942 μN. This supports that the plasmo-nanomechanical biosensors could be employed as novel tool to study living cells behavior., V. Solis-Tinoco, S. Marquez, and T. Quesada-López acknowledge financial support from ¨Programa becas en el extranjero¨ from National Council for Science and Technology (CONACyT-Mexico). The ICN2 is funded by the CERCA programme/ Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa programme of the Spanish Ministry of Science, Innovation and Universities (Grant No. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combined high catalytic activity and efficient polar tubular nanostructure in urchin‐like metallic NiCo2Se4 for high‐performance lithium–sulfur batteries

  • Zhang, Chaoqi
  • Jacas Biendicho, Jordi
  • Zhang, Ting
  • Du, Ruifeng
  • Li, Junshan
  • Yang, Xuhui
  • Arbiol, Jordi
  • Zhou, Yingtang
  • Morante, Joan Ramón
  • Cabot, Andreu
Urchin‐shaped NiCo2Se4 (u‐NCSe) nanostructures as efficient sulfur hosts are synthesized to overcome the limitations of lithium–sulfur batteries (LSBs). u‐NCSe provides a beneficial hollow structure to relieve volumetric expansion, a superior electrical conductivity to improve electron transfer, a high polarity to promote absorption of lithium polysulfides (LiPS), and outstanding electrocatalytic activity to accelerate LiPS conversion kinetics. Owing to these excellent qualities as cathode for LSBs, S@u‐NCSe delivers outstanding initial capacities up to 1403 mAh g−1 at 0.1 C and retains 626 mAh g−1 at 5 C with exceptional rate performance. More significantly, a very low capacity decay rate of only 0.016% per cycle is obtained after 2000 cycles at 3 C. Even at high sulfur loading (3.2 mg cm−2), a reversible capacity of 557 mAh g−1 is delivered after 600 cycles at 1 C. Density functional theory calculations further confirm the strong interaction between NCSe and LiPS, and cytotoxicity measurements prove the biocompatibility of NCSe. This work not only demonstrates that transition metal selenides can be promising candidates as sulfur host materials, but also provides a strategy for the rational design and the development of LSBs with long‐life and high‐rate electrochemical performance., This work corresponds to an extension of activities initially performed around the objectives defined by the Helis project which received funding from the European Union's Horizon 2020 program under the Grant Agreement No. 666221. The authors acknowledge funding from Generalitat de Catalunya2017 SGR 1246 and 2017 SGR 327, the Spanish MINECO projects ENE2016‐77798‐C4‐3‐R and ENE2017‐85087‐C3, and the Zhou Shan Science and Technology Project (2018C21010). C. Zhang and T. Zhang thank the China Scholarship Council (CSC) for scholarship support. IREC acknowledges funding from European Regional Development Funds (ERDF‐FEDER Programa Competitivitat de Catalunya 2007–2013). ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV‐2017‐0706) and was funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Degradation and regeneration mechanisms of NiO protective layers deposited by ALD on photoanodes

  • Ros, Carles
  • Andreu, Teresa
  • David, Jeremy
  • Arbiol, Jordi
  • Morante, Joan Ramón
The use of high pH electrolytes requires protective layers to avoid corrosion in photoanodes based on semiconductors like silicon. NiO is one of the materials that comply with the requirements for transparency, conductivity, chemical stability and catalysis on the surface in contact with the electrolyte. Here, NiO layers have been deposited by atomic layer deposition (ALD) at low temperatures, and their stability is analyzed over 1000 hours. Due to the layer structure characteristics, the best overall performance was achieved at 100 °C deposition temperature. By electrochemical measurements progressive time dependent degradation under anodic working conditions is observed, attributed to the formation of higher nickel oxidation states at the electrode/electrolyte interface as a main degradation mechanism, resulting in an OER overpotential increase. Another minor degradation mechanism affects the optical surface quality and gives rise to a loss of photon absorption efficiency on the scale of hundreds of hours. A regeneration process based on in situ periodic cyclic voltammetry, bringing the electrodes to cathodic conditions every 3, 12 or 48 hours, has been shown to partially reverse the main degradation mechanism achieving 85% stability over 1000 hours in a study with over 10 mA cm−2 photocurrent densities., Authors from the IREC acknowledge Generalitat de Catalunya for financial support through the CERCA Programme, M2E (2014SGR1638). The IREC also acknowledges additional support through the European Regional Development Funds (ERDF, FEDER) and MINECO coordinated projects MAT2014-59961-C2, ENE2016-80788-C5-5-R and ENE2017-85087-C3. C. R. acknowledges the MINECO for his FPI grant (BES-2015-071618). The ICN2 was supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706) and was funded by the CERCA Programme/Generalitat de Catalunya. The ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. J. D. received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 665919 (P-SPHERE) co-funded by the Severo Ochoa Programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Delamination of 2D coordination polymers: The role of solvent and ultrasound

  • Contreras-Pereda, Noemí
  • Hayati, Payam
  • Suárez-García, Salvio
  • Esrafili, P.
  • Retailleau, Pascal
  • Benmansour, S.
  • Novio, Fernando
  • Morsali, Ali
  • Ruiz Molina, Daniel
Two novel cadmium-based 2D coordination polymers have been synthesized and characterized. Experimental results evidence that the best delamination processes occurs when weak interactions dominate the cohesion between layers and solvent molecules are occluded within the crystalline network. In this case, the delamination of the crystals occurs spontaneously in water. On top of that, and thanks to the high stability of the resulting (flake) colloidal dispersions, we have completed a detailed study of the sonication assisted delamination impact by: I) comparison of two different sonication approaches (bath vs. tip sonication) and II) optimization of final flake morphology and yield by controlling solvent and sonication time. Our results definitely pave the way for the fabrication and implementation of 2D coordination polymers using ultrasound., This work was supported by grant MAT 2015-70615-R from the Spanish Government funds and by the European Regional Development Fund (ERDF). Funded by the CERCA Program/Generalitat de Catalunya, ICN2 is supported by the Severo Ochoa program from Spanish Ministry of Economy, Industry and Competitiveness (MINECO) (Grant No. SEV-2017-0706). Noemí Contreras Pereda’s project that gave rise to these results received the support of a fellowship from “la Caixa” Foundation (ID 100010434). The fellowship code is LCF/BQ/ES17/11600012. Salvio Suárez-García acknowledges the support from MINECO BES-2015-071492 grant. S.B. thanks the Generalitat Valenciana (Prometeo2014/II/076 project) and the Spanish MINECO (Project CTQ2017-87201-P AEI/FEDER, EU) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multilayered hematite nanowires with thin‐film silicon photovoltaics in an all‐earth‐abundant hybrid tandem device for solar water splitting

  • Urbain, Félix
  • Tang, Peng-Yi
  • Smirnov, Vladimir
  • Welter, Katharina
  • Andreu, Teresa
  • Finger, Friedhelm
  • Arbiol, Jordi
  • Morante, Joan Ramón
The concept of hybrid tandem device structures that combine metal oxides with thin‐film semiconducting photoabsorbers holds great promise for large‐scale, robust, and cost‐effective bias‐free photoelectrochemical water splitting (PEC‐WS). This work highlights important steps toward the efficient coupling of high‐performance hematite photoanodes with multijunction thin‐film silicon photocathodes providing high bias‐free photocurrent density. The hybrid PEC‐WS device is optimized by testing three types of multijunction silicon photocathodes with the hematite photoanode: amorphous silicon (a‐Si:H) tandem: a‐Si:H/a‐Si:H and triple junction with microcrystalline silicon (μc‐Si:H): a‐Si:H/a‐Si:H/μc‐Si:H and a‐Si:H/μc‐Si:H/μc‐Si:H. The results provide evidence that the multijunction structures offer high flexibility for hybrid tandem devices with regard to tunable photovoltages and spectral matching. Furthermore, both photoanode and photocathode are tested under various electrolyte and light concentration conditions, respectively, with respect to their photoelectrochemical performance and stability. A 27 % enhancement in the solar‐to‐hydrogen conversion efficiency is observed upon concentrating light from 100 to 300 mW cm−2. Ultimately, bias‐free water splitting is demonstrated, with a photocurrent density of 4.6 mA cm−2 (under concentrated illumination) paired with excellent operation stability for more than 24 h of the all‐earth‐abundant and low‐cost hematite/silicon tandem PEC‐WS device., The authors acknowledge funding from Generalitat de Catalunya through the CERCA program, 2017 SGR 1246, 2017 SGR 327 and the Spanish MINECO projects MAT2014‐59961, ENE2016‐80788‐C5‐5‐R and ENE2017‐85087, together with the support from REPSOL, S. A. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV‐2017‐0706). IREC also acknowledges additional support from the European Regional Development Funds (ERDF, FEDER), (S)TEM part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program and the rest in the Nanoscience program of the University of Barcelona. The authors thank S. Moll (IEK‐5), M. Biset‐Peiró (IREC), and H. Xie (IREC) for their contribution to this work. F.U. acknowledges financial support from MINECO through Juan de la Cierva fellowship (FJCI‐2016–29147).V.S., K.W., and F.F. (authors from IEK‐5) thank the Deutsche Forschungsgemeinschaft (DFG) (Priority Program SPP 1613)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanowire forest of pnictogen–chalcogenide alloys for thermoelectricity

  • Singhal, Dhruv
  • Paterson, Jessy
  • Ben-Khedim, Meriam
  • Tainoff, Dimitri
  • Cagnon, Laurent
  • Richard, Jacques
  • Chávez-Angel, Emigdio
  • Jaramillo-Fernandez, Juliana
  • Sotomayor Torres, C. M.
  • Lacroix, David
  • Bourgault, Daniel
  • Buttard, Denis
  • Bourgeois, Olivier
Pnictogen and chalcogenide compounds have been seen as high-potential materials for efficient thermoelectric conversion over the past few decades. It is also known that with nanostructuration, the physical properties of these pnictogen–chalcogenide compounds can be further enhanced towards a more efficient heat conversion. Here, we report the reduced thermal conductivity of a large ensemble of Bi2Te3 alloy nanowires (70 nm in diameter) with selenium for n-type and antimony for p-type (Bi2Te3−ySey and Bi2−xSbxTe3 respectively). The nanowire growth was carried out through electrodeposition in nanoporous aluminium oxide templates with high aspect ratios leading to a forest (109 per centimetre square) of nearly identical nanowires. The temperature dependence of thermal conductivity for the nanowire ensembles was acquired through a highly sensitive 3ω measurement technique. The change in the thermal conductivity of nanowires is largely affected by the roughness in addition to the size effect due to enhanced boundary scattering. The major factor that influences the thermal conductivity was found to be the ratio of the rms roughness to the correlation length of the nanowire. With a high Seebeck coefficient and electrical conductivity at room temperature, the overall thermoelectric figure of merit ZT allows the consideration of such forests of nanowires as efficient potential building blocks of future TE devices., The authors acknowledge funding and support from the ANR project MESOPHON, the Laboratoire dexcellence LANEF in Grenoble (No. ANR-10-LABX-51-01), and from the ANRT. ECA, JJF and CMST acknowledge support from the Severo Ochoa Program (MINECO, Grant SEV-2017-0706) and funding from the CERCA Programme/Generalitat de Catalunya. Funding from the Spanish Ministry MINECO/FEDER: FIS2015-70862-P PHENTOM is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailor-made metal-nitrogen-carbon bifunctional electrocatalysts for rechargeable Zn-air batteries via controllable MOF units

  • Zhang, Xuan
  • Luo, Jiangshui
  • Lin, Heng-Fu
  • Tang, Peng-Yi
  • Morante, Joan Ramón
  • Arbiol, Jordi
  • Wan, Kai
  • Mao, Bing-Wei
  • Liu, Li-Min
  • Fransaer, Jan
The majority of chemical syntheses involve the use of catalysts, which play a crucial role in the yield and conversion rates of chemical reactions. In view of the increasing demand for chemical commodities and specialties linked to the growth of the world's population and the living standards, highly efficient and low-cost catalysts are urgently required. The metal-nitrogen-carbon (M-N-C) catalysts family is one of the most promising candidates. In this work, a series of benzene-1,3,5-tricarboxylate linker based metal organic frameworks (MOFs) were used as self-sacrificial templates and tunable platform for designable preparation of M-N-C catalysts. Changing the pillars between the 2D layers and the nature of the metal ions in the pristine MOFs significantly influenced the structure, chemical composition and catalytic activity of the resulting M-N-C catalysts for the oxygen reduction reaction (ORR). Furthermore, the influence of the MOF units on the catalyst performance, the role of the metals in the M-N-C catalysts and the primary catalytically active sites for ORR were explored by a combination of density functional theory (DFT), in-depth structural and chemical/elemental characterizations, and electrochemical studies. Among the prepared catalysts, Co-BTC-bipy-700 exhibited the highest electrocatalytic activity for oxygen reduction reaction (ORR), which showed a larger limiting current density and similar half-wave potentials with less catalyst degradation and much higher methanol tolerance than the commercial Pt/C catalyst. Meanwhile, as a bifunctional electrocatalyst, Co-BTC-bipy-700 catalyst was also employed for oxygen evolution reaction (OER) and demonstrated a lower overpotential (lowered by 140 mV at a current density of 10 mA cm−2) and better durability than IrO2. Furthermore, in terms of device performance, the Zn-air battery enabled by Co-BTC-bipy-700 catalyst reached a maximum specific energy as high as 1009.8 Wh kg−1, which is 76.5% of the theoretical value (1320 Wh kg−1), and demonstrated higher discharge potential and lower charge potential than that based on the Pt/C catalyst. Importantly, the presented strategy for tailor-made M-N-C catalysts by controlling the synthesis of the pristine MOFs could offer a guide map for the future design of M-N-C catalysts family not only for electrochemical reactions but also beyond electrochemistry., X. Zhang is grateful to China Scholarship Council (China). J. Luo acknowledges the Research Foundation – Flanders (FWO, Belgium) for a Research Project (G0B3218N), Research Grant (1529816N) and a travel grant (V410316N) for a Visiting Professorship at the Technical University of Denmark. Heng-Fu Lin acknowledges the National Natural Science Foundation of China (11747154) and Tianhe-2JK computing time allocation at the Beijing Computational Science Research Center (CSRC, China). ICN2 and IREC acknowledge, respectively, funding from Generalitat de Catalunya 2017 SGR 327 and 1246 (Spain); the Spanish MINECO coordinated project VALPEC (ENE2017-85087-C3), Spain. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV-2013-0295, SEV-2017-0706), Spain. Likewise, ICN2 and IREC are funded by the CERCA Programme / Generalitat de Catalunya, Spain. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. JRM is belonging to University of Barcelona. Funding from the National Natural Science Foundation of China (No. 21776120, China), "Minjiang Scholar" Program and key project (No. JZ160480, China) of Department of Education, Fujian Province, China, and Open Project (No. 201607, China) of State Key Laboratory of Physical Chemistry of Solid Surfaces, Xiamen University is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Upscaling high activity oxygen evolution catalysts based on CoFe2O4 nanoparticles supported on nickel foam for power-to-gas electrochemical conversion with energy efficiencies above 80%

  • Urbain, Félix
  • Du, Ruifeng
  • Tang, Peng-Yi
  • Smirnov, Vladimir
  • Andreu, Teresa
  • Finger, Friedhelm
  • Divins, Núria J.
  • Llorca, Jordi
  • Arbiol, Jordi
  • Cabot, Andreu
  • Morante, Joan Ramón
We investigate cobalt ferrite nanoparticles (NPs) supported on large-scale electrodes as oxygen evolution reaction (OER) catalysts. Colloidal CoFe2O4 NPs were loaded on low-cost and high surface area nickel foam (NF) scaffolds. The coating process was optimized for large electrode areas, ensuring a proper distribution of the NPs on the NF that allowed overcoming the electrical conductivity limitations of oxide NPs. We were able to produce CoFe2O4-coated NFs having 10 cm2 geometric surface areas with overpotentials below 300 mV for the OER at a current density of 50 mA/cm2. Such impressively low overpotentials suggested using CoFe2O4 NP-based electrodes within a water electrolysis device. In this prototype device, stable operating currents up to 500 mA at remarkably low cell-voltages of 1.62 and 1.53 V, at ambient and 50 °C electrolyte temperatures, respectively, were reached during operation periods of up to 50 h. The high electrochemical energy efficiencies reached at 50 mA/cm2, 75% and 81% respectively, rendered these devices particularly appealing to be combined with low-cost photovoltaic systems for bias-free hydrogen production. Therefore, CoFe2O4 NP-based electrolysers were coupled to low-cost thin-film silicon solar cells with 13% efficiency to complete a system that afforded solar-to-fuel efficiencies above 10%., Authors acknowledge funding from Generalitat de Catalunya through the CERCA program, 2017 SGR 1246, 2017 SGR 327 and the Spanish MINECO projects MAT2014-59961, ENE2016-80788-C5-5-R, ENE2016-77798-C4-3-R and ENE2017-85087, together with the support from Repsol S. A. Likewise, the authors thank Enagás S.A. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). IREC also acknowledges additional support from the European Regional Development Funds (ERDF, FEDER), (S)TEM part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program and the rest in the Nanoscience program of the University of Barcelona. The authors thank S. Moll (IEK-5), M. Biset-Peiró (IREC), and H. Xie (IREC) for their contribution to this work. F.U. acknowledges financial support from MINECO through Juan de la Cierva fellowship (FJCI-2016-29147).V.S. and F.F. (authors from IEK-5) thank the Deutsche Forschungsgemeinschaft (DFG) (Priority Program SPP 1613). J. Llorca is a Serra Húnter Fellow and is grateful to ICREA Academia program and funding from Generalitat de Catalunya 2017 SGR 128., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Self-Assembled 2D Thermofunctional Material for Radiative Cooling

  • Jaramillo-Fernandez, Juliana
  • Whitworth, Guy L.
  • Pariente González, J. Ángel
  • Blanco Montes, Álvaro
  • García Fernández, Pedro David
  • López, Cefe
  • Sotomayor Torres, C. M.
[EN] The regulation of temperature is a major energy-consuming process of humankind. Today, around 15% of the global-energy consumption is dedicated to refrigeration and this figure is predicted to triple by 2050, thus linking global warming and cooling needs in a worrying negative feedback-loop. Here, an inexpensive solution is proposed to this challenge based on a single layer of silica microspheres self-assembled on a soda-lime glass. This 2D crystal acts as a visibly translucent thermal-blackbody for above-ambient radiative cooling and can be used to improve the thermal performance of devices that undergo critical heating during operation. The temperature of a silicon wafer is found to be 14 K lower during daytime when covered with the thermal emitter, reaching an average temperature difference of 19 K when the structure is backed with a silver layer. In comparison, the soda-lime glass reference used in the measurements lowers the temperature of the silicon by just 5 K. The cooling power of this simple radiative cooler under direct sunlight is found to be 350 W m when applied to hot surfaces with relative temperatures of 50 K above the ambient. This is crucial to radiatively cool down devices, i.e., solar cells, where an increase in temperature has drastic effects on performance., The European Union’s Horizon 2020 research and innovation program under the Marie Sklodoswa-Curie grant agreement N 665919 supported J.J.-F. and funded this project. Moreover, the research received funds from the Spanish Minister of Science, Innovation and Universities via the Severo Ochoa Program (Grant No. SEV-2017-0706), RTI2018-093921-B-C41 and RTI2018-093921-A-C44 (SMOOTH), as well as by the CERCA Program/Generalitat de Catalunya. P.D.G. was supported by a Ramon y Cajal fellowship nr. RyC-2015-18124. J.J
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The formation of oriented barium carbonate from the decomposition of yttria-doped barium zirconate films

  • Jennings, Michael R.
  • Ricote, Sandrine
  • Santiso, José
  • Reimanis, Ivar
Yttria doped barium zirconate (BZY) thin films show promise thanks to their high proton conductivities and their possibility for use in studying fundamental processes such as exsolution. This work demonstrates that highly oriented BZY thin (45 nm) films on (100) single crystal strontium titanate decompose into oriented barium carbonate rods and yttria stabilized zirconia when exposed to industrial grade Ar or pure CO2 at 800 °C. It is shown with transmission electron microscopy that the rods nucleate on the BZY surface. The causes and modes of decomposition in these thin films are discussed in detail., This work was funded through the National Science Foundation via grant DMR1563754. Additionally, this material makes use of the TOF-SIMS system at the Colorado School of Mines, which was supported by the National Science Foundation under Grant No.1726898. JS would like to thank ICN2 for funding through the CERCA program/Generalitat de Catalunya and by the Severo Ochoa program (SEV-2017–0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Water/methanol solutions characterized by liquid μ-jet XPS and DFT—The methanol hydration case

  • Pellegrin, Eric
  • Pérez-Dieste, Virginia
  • Escudero, Carlos
  • Rejmak, Pawel
  • González, Nahikari
  • Fontsere, Abel
  • Prat, Jordi
  • Fraxedas, J.
  • Ferrer, Salvador
The advent of liquid μ-jet setups as proposed by Faubel and Winter – in conjunction with X-ray Photoemission Spectroscopy (XPS) – has opened up a large variety of experimental possibilities in the field of atomic and molecular physics. In this study, we present first results from a synchrotron-based XPS core level and valence band electron spectroscopy study on water (10-4 M aqueous NaCl solution) as well as a water/methanol mixture using the newly commissioned ALBA liquid μ-jet setup. The experimental results are compared with simulations from density functional theory (DFT) regarding the electronic structure of single molecules, pure molecular clusters, and mixed clusters configurations as well as previous experimental studies. We give a detailed interpretation of the core level and valence band spectra for the vapour and liquid phases of both sample systems. The resulting overall picture gives insight into the water/methanol concentrations of the vapour and liquid phases as well as into the local electronic structure of the pertinent molecular clusters under consideration, with a special emphasis on methanol as the simplest amphiphilic molecule capable of creating hydrogen bonds., The ICN2 is funded by the CERCA Programme/Generalitat de Catalunya (grant no. I/410002100/0000; Spain). The ICN2 is supported by the Severo Ochoa Centres of Excellence programme, funded by the Spanish Research Agency (AEI, grant no. SEV-2017-0706; Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-energy phases of Bi monolayer predicted by structure search in two dimensions

  • Singh, Sobhit
  • Zanolli, Zeila
  • Tinajero, Romeo
  • Amsler, Maximilian
  • Belhadji, B.
  • Sofo, Jorge O.
  • Verstraete, Matthieu J.
  • Romero, Aldo H.
arXiv:1901.05060v1, We employ an ab-initio structure search algorithm to explore the configurational space of bismuth in quasi-two dimensions. A confinement potential is introduced to restrict the movement of atoms within a predefined thickness to find the stable and metastable forms of monolayer Bi. In addition to the two known low-energy structures (puckered monoclinic and buckled hexagonal), our calculations predict three new phases: α, β, and γ. Each phase exhibits peculiar electronic properties, ranging from metallic (α and γ) to semiconducting (puckered monoclinic, buckled hexagonal, and β) monolayers. Topologically nontrivial features are predicted for buckled hexagonal and γ phases. We also remark on the role of 5d electrons on the electronic properties of Bi monolayer. We conclude that Bi provides a rich playground to study distortion-mediated metal–insulator phase transitions in quasi-2D., This work used the Extreme Science and Engineering Discovery Environment (XSEDE), which is supported by National Science Foundation Grant Number OCI-1053575. Additionally, the authors acknowledge support from Texas Advanced Computer Center (TACC), the Bridges supercomputer at the Pittsburgh Supercomputer Center, and Super Computing Systems (Spruce and Mountaineer) at West Virginia University (WVU). A.H.R. and S.S. acknowledge support from the National Science Foundation (NSF) DMREF-NSF 1434897, NSF OAC-1740111, and DOE DE-SC0016176 projects. S.S. acknowledges support from the Dr. Mohindar S. Seehra Research Award and the Distinguished Doctoral Scholarship at West Virginia University. Z.Z. acknowledges financial support by the Ramon y Cajal program (RYC-2016-19344), the CERCA programme of the Generalitat de Catalunya (Grant 2017SGR1506), the Severo Ochoa programme (MINECO, SEV-2017-0706), and the Deutsche Forschungsgemeinschaft (DFG) Grant No. ZA 780/3-1. M.A. acknowledges support from the Novartis Universitat Basel Excellence Scholarship for ̈ Life Sciences and the Swiss National Science Foundation (Project No. P300P2-158407, P300P2-174475). M.J.V. acknowledges funding by the Belgian FNRS (PDR G.A. T.1077.15-1/7 and a sabbatical “OUT” grant at ICN2), ULiege and the Communauté Francaise de Belgique (ARC ̧ AIMED G.A. 15/19-09), and computational resources from the Consortium des Equipements de Calcul Intensif (FRSFNRS G.A. 2.5020.11) and Zenobe/CENAERO funded by the Walloon Region under G.A. 1117545., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Label-free plasmonic biosensor for rapid, quantitative, and highly sensitive COVID-19 serology: implementation and clinical validation

  • Calvo-Lozano, Olalla
  • Sierra, Miquel
  • Soler, María
  • Estévez, M. Carmen
  • Chiscano- Camón, Luis
  • Ruiz-Sanmartín, Adolfo
  • Ruiz-Rodriguez, Juan Carlos
  • Ferrer, Ricard
  • González-López, Juan José
  • Esperalba, Juliana
  • Fernández-Nava, Candela
  • Bueno, Leticia
  • López-Aladid, Rubén
  • Torres, Antoni
  • Fernández-Barat, Laia
  • Attoumani, Sarah
  • Charrel, Remi
  • Coutard, Bruno
  • Lechuga, Laura M.
Serological tests are essential for the control and management of COVID-19 pandemic, not only for current and historical diagnostics but especially for surveillance, epidemiological, and acquired immunity studies. Clinical COVID-19 serology is routinely performed by enzymatic or chemiluminescence immunoassays (i.e., ELISA or CLIA), which provide good sensitivities at the expense of relatively long turnaround times and specialized laboratory settings. Rapid serological tests, based on lateral flow assays, have also been developed and widely commercialized, but they suffer from limited reliability due to relatively low sensitivity and specificity. We have developed and validated a direct serological biosensor assay employing proprietary technology based on Surface Plasmon Resonance (SPR). The biosensor offers a rapid -less than 15 min- identification and quantification of SARS-CoV-2 antibodies directly in clinical samples, without the need of any signal amplification. The portable plasmonic biosensor device employs a custom-designed multi-antigen sensor biochip, combining the two main viral antigens (RBD peptide and N protein), for simultaneous detection of human antibodies targeting both antigens. The SPR serology assay reaches detection limits in the low ng mL-1 range employing polyclonal antibodies as standard, which are well below the commonly detected antibody levels in COVID-19 patients. The assay has also been implemented employing the first WHO approved anti-SARS-CoV-2 immunoglobulin standard. We have carried out a clinical validation with COVID-19 positive and negative samples (n=120) that demonstrates the excellent diagnostic sensitivity (99%) and specificity (100%). This positions our biosensor device as an accurate, robust, and easy-to-use diagnostics tool for rapid and reliable COVID-19 serology to be employed both at laboratory and decentralized settings for the management of COVID-19 patients and for the evaluation of immunological status during vaccination, treatment or in front of emerging variants., H2020 Research and Innovation Programme of the European Commission Project, No. 101003544 Spanish Research Agency (AEI, grant no. SEV-2017-0706AEI, grant no. SEV-2017-0706) Spanish Ministry of Science and Innovation and the Spanish Research Agency and the European Social Fund (ESF)BES-2017-080527 GENCAT-DGRIS COVID EU H2020 Programme (644956) Plan Nacional de I+D+i 2013-2016 ISCIII- Ministerio de Ciencia e Innovación, Vall d’Hebron University Hospital Biobank PT17/0015/0047 European Virus Archive GLOBAL (EVA-GLOBAL) EU Horizon 2020 (grant agreement No. 871029) Fundació Glòria Soler for COVIDBANK collection Spanish Network for Research in Infectious Diseases (REIPI RD16/0016/0003), No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Back-to-Basics tutorial: X-ray diffraction of thin films

  • Harrington, George F.
  • Santiso, José
X-ray diffraction (XRD) is an indispensable tool for characterising thin films of electroceramic materials. For the beginner, however, it can be a daunting technique at first due to the number of operation modes and measurements types, as well as the interpretation of the resultant patterns and scans. In this tutorial article, we provide a foundation for the thin-film engineer/scientist conducting their first measurements using XRD. We give a brief introduction of the principle of diffraction and description of the instrument, detailing the relevant operation modes. Next, we introduce five types of measurements essential for thin film characterisation: 2 θ/ ω scans, grazing-incidence scans, rocking curves, pole figures, and azimuth scans (or ϕ scans). Practical guidelines for selecting the appropriate optics, mounting and aligning the sample, and selecting scan conditions are given. Finally, we discuss some of the basics of data analysis, and give recommendations on the presentation of data. The aim of this article is to ultimately lower the barrier for researchers to perform meaningful XRD analysis, and, building on this foundation, find the existing literature more accessible, enabling more advanced XRD investigations., GFH acknowledges support from The Japanese Science and Technology Agency (JST) through its Center of Innovation Program (COI Program, grant number: JPMJCE1318) and the International Institute for Carbon-Neutral Energy Research (WPI-I2CNER), supported by MEXT, Japan. ICN2 is funded by the CERCA programme/Generalitat de Catalunya and by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV-2017-0706)., Peer reviewed