Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 793
Encontrada(s) 8 página(s)

Docta Complutense
Publicación Contribución de congreso (ConferenceOutput)

Conditional dynamic partial order reduction and optimality results

  • Isabel Márquez, Miguel
Testing concurrent systems requires exploring all possible nondeterministic interleavings that the concurrent execution may have, as any of the interleavings may reveal an erroneous behaviour of the system. This introduces a combinatorial explosion on the number of states that must be considered, which leads often to a computationally intractable problem. In the present PhD thesis, this challenge will be addressed through the development of new Partial Order Reduction techniques (POR). The cornerstone of POR theory is the notion of independence, that is used to decided whether each pair of concurrent events p and t are in a race and thus both executions p · t and t · p must be explored. A fundamental goal of this thesis is to introduce notions of conditional independence –which ensure the commutativity of the considered events p and t under certain conditions that can be evaluated in the explored state– with a DPOR algorithm in order to alleviate the combinatorial explosion problem. The new techniques that we propose in the thesis have been implemented within the SYCO tool. We have carried out accompanying experimental evaluations to prove the effectiveness and applicability of the proposed techniques. Finally, we have successfully verified a range of properties for several case studies of Software-Defined Networks to illustrate the potential of the approach, scaling to larger networks than related techniques.
Docta Complutense
Publicación Contribución de congreso (ConferenceOutput)

Constrained Dynamic Partial Order Reduction

  • Albert Albiol, Elvira María
  • Gómez-Zamalloa Gil, Miguel
  • Isabel Márquez, Miguel
  • Rubio, Albert
The cornerstone of dynamic partial order reduction (DPOR) is the notion of independence that is used to decide whether each pair of concurrent events p and t are in a race and thus both p · t and t · p must be explored. We present constrained dynamic partial order reduction (CDPOR), an extension of the DPOR framework which is able to avoid redundant explorations based on the notion of conditional independence— the execution of p and t commutes only when certain independence constraints (ICs) are satisfied. ICs can be declared by the programmer, but importantly, we present a novel SMT-based approach to automatically synthesize ICs in a static pre-analysis. A unique feature of our approach is that we have succeeded to exploit ICs within the state-of-the-art DPOR algorithm, achieving exponential reductions over existing implementations.
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

A Real-time feedback learning tool to visualize sound quality in violin performances

  • Giraldo, Sergio
  • Ramírez, Rafael, 1966-
  • Waddell, George
  • Williamon, Aaron
Comunicació presentada a: 10th International Workshop on Machine Learning and Music (MML), celebrat a Barcelona (Espanya), el 6 d'octubre de 2017., The assessment of the sound properties of a performed mu- sical note has been widely studied in the past. Although a consensus exist on what is a good or a bad musical performance, there is not a formal de nition of performance tone quality due to its subjectivity. In this study we present a computational approach for the automatic assess- ment of violin sound production. We investigate the correlations among extracted features from audio performances and the perceptual quality of violin sounds rated by listeners using machine learning techniques. The obtained models are used for implementing a real-time feedback learning system., This work has been partly sponsored by the Spanish TIN project TIMUL (TIN2013-48152-C2-2-R), the European Union Horizon 2020 research and inno- vation programme under grant agreement No. 688269 (TELMI project), and the Spanish Ministry of Economy and Competitiveness under the Maria de Maeztu Units of Excellence Programme (MDM-2015-0502).
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

Acquisition of violin instrumental gestures using an infrared depth camera

  • Vamvakousis, Zacharias
  • Perez, Alfonso
  • Ramírez, Rafael, 1966-
Comunicació presentada a: 15th Sound and Music Computing Conference (SMC2018), celebrat del 4 al 7 de juliol a Limassol, Xipre., We present a low-cost six-degrees of freedom violin and bow pose-tracking system. The infrared and depth streams of an infrared-based Microsoft Kinect Mbox One depth camera are utilized to track the 3-dimensional position of 6 infrared markers attached on the violin and the bow. After computing the bow pose on the violin coordinate system, a number of bowing features are extracted. In order to evaluate the system’s performance, we recorded 4 bowing exercises using simultaneously our system along with a commercial two-sensor 3D tracking system based on electromagnetic field (EMF) sensing. The mean pearson coefficient values were 0.996 for the bow position, 0.889 for the bow velocity, 0.966 for the bow tilt, 0.692 for the bowbridge distance and 0.998 for the bow inclination. Compared to existing bowing-tracking solutions, the proposed solution might be appealing because of its low cost, easy setup and high performance., This work was partly sponsored by the Spanish TIN project TIMUL (TIN2013-48152-C2-2-R), and the European Union Horizon 2020 research and innovation program under grant agreement No. 688269 (TELMI project).
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

JamSketch: improvisation support system with GA-based melody creation from user’s drawing

  • Kitahara, Tetsuro
  • Giraldo, Sergio
  • Ramírez, Rafael, 1966-
Comunicació presentada al 13th International Symposium (CMMR), celebrat del 25 al 28 de setembre de 2017 a Matosinhos, Portugal., Improvisation is an enjoyable form of music performance but requires advanced skills and knowledge of music because the player has to create melodies immediately during the performance. To support improvisations by people without skills or knowledge of music, we have to develop (1) a human interface that can be used without skills or knowledge of music and (2) automatic melody generation from the user’s input that may be musically abstract or incomplete. In this paper, we develop an improvisation support system based on melodic outlines, which represent the overall contour of melodies, with a function of melody generation using a genetic algorithm (GA). Once the user draws a melodic outline on the piano-roll display with the mouse or touch screen, the system immediately generates a melody using a GA with a fitness function based on the similarity to the outline, an N-gram probability, and entropy. The generated melody is performed expressively based on expression parameters calculated with an machine learning approach. The results of listening tests for comparing human performances and the system’s performances suggest that generated melodies have quality similar to performances by non-expert human performers., This work was supported by JSPS KAKENHI Grant Numbers 26240025, 26280089, 16K16180, 16H01744, 16KT0136, and 17H00749 as well as by the Spanish TIMuL Project (TIN2013-48152-C2-2-R), and the TELMI Project of the Horizon 2020 Research and Innovation Programme (grant agreement No. 688269).
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

Sphericity minimum description length: asymptotic performance under unknown noise variance

  • Font-Segura, Josep
  • Riba, Jaume
  • Vázquez, Gregori
Comunicació presentada a 2015 IEEE International Symposium on Information Theory (ISIT), celebrada del 14 al 19 de juny de 2015 a Hong Kong, This paper revisits the model order selection problem in the context of second-order spectrum sensing in cognitive radio. Taking advantage of the recent interest on the generalized likelihood ratio (GLR), the asymptotic performance of the minimum description length (MDL) rule under unknown noise variance is addressed. In particular, by exploiting the asymptotically Chi-squared distribution of the GLR, a complete characterization of the error probability is reported, instead of approximating only the missed-detection probability as done in the literature, This work has been partially funded by the the Spanish Government (Ministerio de Econom´ıa y Competitividad) under TEC2010-21245-C02- 01 (DYNACS), TEC2013-47020C2-2-R COMPASS (COMPASS), CONSOLIDER INGENIO CSD2008-00010 (COMONSENS), CENIT CEN20101019 (THOFU), and the Catalan Government (AGAUR) under Grant 2014 SGR 60 and Fellowship FI-2010.
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

Computational modelling of timbre dimensions for automatic violin tone quality assessment

  • Giraldo, Sergio
  • Ramírez, Rafael, 1966-
  • Waddell, George
  • Williamon, Aaron
Automatic assessment of music performance is an open research area widely studied in the past. A vast amount of systems aiming to enhance the learning process of a musical instrument are being developed in the recent years. However, most of the systems focus on the assessment of pitch and onset accuracy, and very few pay attention to tone quality. This is particularly true in violin music education, where although a consensus exist on what is a good or a bad tone quality, there is not a formal definition due to its subjectivity. We present a machine learning approach for the automatic assessment of violin tone quality. We depart from our previous work on the preliminary modelling of several dimensions involving tone quality. Based on recorded examples of tones with different qualities defined and recorded by a professional violinist, we applied machine learning techniques to learn computational models able to evaluate tone quality from extracted audio features. The tone quality models were implemented into a real-time-visual-feedback system., This work has been partly sponsored by the Spanish TIN project TIMUL (TIN2013-48152-C2-2-R), the European Union Horizon 2020 research and innovation programme under grant agreement No. 688269 (TELMI project), and the Spanish Ministry of Economy and Competitiveness under the Maria de Maeztu Units of Excellence Programme (MDM-2015-0502).
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

JamSketch: a drawing-based real-time evolutionary improvisation support system

  • Kitahara, Tetsuro
  • Giraldo, Sergio
  • Ramírez, Rafael, 1966-
Comunicació presentada a: International Conference on New Interfaces for Musical Expression celebrat del 15 al 19 de maig de 2017 a Copenhagen, Dinamarca., In this paper, we present JamSketch, a real-time improvisation support system which automatically generates melodies according to melodic outlines drawn by the users. The system generates the improvised melodies based on (1) an outline sketched by the user using a mouse or a touch screen, (2) a genetic algorithm based on a dataset of existing music pieces as well as musical knowledge, and (3) an expressive performance model for timing and dynamic transformations. The aim of the system is to allow people with no prior musical knowledge to be able to enjoy playing music by improvising melodies in real time., This work was supported by JSPS KAKENHI Grant Numbers 26240025, 26280089, 16K16180, 16H01744, and 16KT0136, as well as by the Spanish TIMuL Project (TIN2013-48152-C2-2-R), and the TELMI Project of the Horizon 2020 Research and Innovation Programme (grant agreement No. 688269).
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

A Machine learning approach to violin bow technique classification: a comparison between IMU and MOCAP systems

  • Dalmazzo, David
  • Tassani, Simone
  • Ramírez, Rafael, 1966-
Comunicació presentada a: 5th international Workshop on Sensor-based Activity Recognition and Interaction celebrat el 20 i 21 de setembre de 2018 a Berlin, Alemanya., Motion Capture (MOCAP) Systems have been used to analyze body motion and postures in biomedicine, sports, rehabilitation, and music. With the aim to compare the precision of low-cost devices for motion tracking (e.g. Myo) with the precision of MOCAP systems in the context of music performance, we recorded MOCAP and Myo data of a top professional violinist executing four fundamental bowing techniques (i.e. Détaché, Martelé, Spiccato and Ricochet). Using the recorded data we applied machine learning techniques to train models to classify the four bowing techniques. Despite intrinsic differences between the MOCAP and low-cost data, the Myo-based classifier resulted in slightly higher accuracy than the MOCAP-based classifier. This result shows that it is possible to develop music-gesture learning applications based on low-cost technology which can be used in home environments for self-learning practitioners., This work has been partly sponsored by the Spanish TIN project TIMUL (TIN 2013-48152-C2-2-R), the European Union Horizon 2020 research and innovation programme under grant agreement No. 688269 (TELMI project), and the Spanish Ministry of Economy and Competitiveness under the Maria de Maeztu Units of Excellence Programme (MDM-2015-0502).
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

Computational modelling of expressive music performance in hexaphonic guitar

  • Siquier, Marc
  • Giraldo, Sergio
  • Ramírez, Rafael, 1966-
Comunicació presentada a: 10th International Workshop on Machine Learning and Music (MML), celebrat a Barcelona (Espanya), el 6 d'octubre de 2017., Computational modelling of expressive music performance has been widely studied in the past. While previous work in this area has been mainly focused on classical piano music, there has been very little work on guitar music, and such work has focused on monophonic guitar playing. In this work, we present a machine learning approach to automatically generate expressive performances from non expressive music scores for polyphonic guitar. We treated guitar as an hexaphonic instrument, obtaining a polyphonic transcription of performed musical pieces. Features were extracted from the scores and performance actions were calculated from the deviations of the score and the performance. Machine learning techniques were used to train computational models to predict the aforementioned performance actions. Qualitative and quantitative evaluations of the models and the predicted pieces were performed., This work has been partly sponsored by the Spanish TIN project TIMUL (TIN2013-48152-C2-2-R), the European Union Horizon 2020 research and inno- vation programme under grant agreement No. 688269 (TELMI project), and the Spanish Ministry of Economy and Competitiveness under the Maria de Maeztu Units of Excellence Programme (MDM-2015-0502).
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

Modeling liver electrical conductivity during hypertonic injection

  • Castellví Fernández, Quim
  • Sánchez Velázquez, Patricia, 1985-
  • Moll, Xavier
  • Berjano, Enrique J.
  • Andaluz, Anna
  • Burdío Pinilla, Fernando
  • Bijnens, Bart
  • Ivorra Cano, Antoni, 1974-
Metastases in the liver frequently grow as scattered tumor nodules which neither can be removed by surgical resection nor focally ablated. Previously, we have proposed a novel technique based on irreversible electroporation which may be able to simultaneously treat all nodules in the liver while sparing healthy tissue. The proposed technique requires increasing the electrical conductivity of healthy liver by injecting a hypersaline solution through the portal vein. Aiming to assess the capability of increasing the global conductivity of the liver by means of hypersaline fluids, here it is presented a mathematical model which estimates the NaCl distribution within the liver and the resulting conductivity change. The model fuses wellestablished compartmental pharmacokinetic models of the organ with saline injection models employed for resuscitation treatments and it considers changes in sinusoidal blood viscosity due to the hypertonicity of the solution. Here it is also described a pilot experimental study in pigs in which different volumes of NaCl 20% (from 100 to 200 ml) were injected through the portal vein at different flow rates (from 53 to 171 ml/min). The in vivo conductivity results fit those obtained by the model, both quantitatively and qualitatively, being able to predict the maximum conductivity with a 14.6% average relative error. The maximum conductivity value was 0.44 S/m which corresponds to increasing four times the mean basal conductivity (0.11 S/m). The results suggest that the presented model is well suited for predicting on liver conductivity changes during hypertonic saline injection., Spanish Government; contract/grant number: TEC2014-52383-C3-1-R, TEC2014-52383-C3-2-R and TEC2014-52383-C3-3-R
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

Charge counter for performing active charge-balance in miniaturized electrical stimulators

  • Becerra Fajardo, Laura
  • Ivorra Cano, Antoni, 1974-
Functional Electrical Stimulation (FES) has been explored in order to restore the capabilities of the nervous system in patients that suffer from paralysis. This area of research and of clinical practice greatly benefits from any technological improvement yielding miniaturization. In this regard, we recently proposed and demonstrated an innovative electrical stimulation method based on implanted microstimulators that operate as rectifiers of bursts of innocu-ous high frequency current supplied by skin electrodes, gener-ating low frequency currents that are capable of stimulating excitable tissues. We envision flexible ultrathin implants (di-ameters < 300 μm) containing ASICs that have advanced ca-pabilities, such as addressability and current control. As min-iaturization is the main aim of this method, the use of bulky DC-blocking capacitors (e.g. 10 μF) to accomplish zero net charge injection and avoid electrochemical tissue and electrode damage is highly inconvenient. As an alternative, here we present an active charge-balance method based on the use of a digital charge quantifier, whose operation is inspired in the functioning of the tipping bucket rain gauge. The system moni-tors the charge injection, matching the charge injected in the cathodal phase, with the charge injected in the anodal phase, generating a biphasic current waveform that adapts itself to possible current source mismatches. We have implemented a prototype built with discrete components which uses a capaci-tor of only 100 pF for the charge counter., AI’s research is supported by a Ramón y Cajal fellowship/nfrom the Spanish government and a Marie Curie grant/n(IRG 256376) from the European Commission. LBF’s research/nis supported by a scholarship from the UPF.
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

Automatic assessment of violin performance using dynamic time warping classification

  • Giraldo, Sergio
  • Ortega, Ariadna
  • Pérez Carrillo, Alfonso Antonio, 1977-
  • Ramírez, Rafael, 1966-
  • Waddell, George
  • Williamon, Aaron
Comunicació presentada a: 26th Signal Processing and Communications Applications Conference, celebrada a Izmir, Turkey, del 2 al 5 de maig de 2018., The automatic assessment of music performance has become an area of special interest due to the increasing amount of technology-enhanced music learning systems. However, in most of these systems the assessment of the musical performance is based on the accuracy of onsets and pitch, paying little attention to other relevant aspects of performance. In this paper we present a preliminary study to assess the quality of violin performance using machine learning techniques. We collect recording examples of selected violin exercises varying from expert to amateur performances. We process the audio signal to extract features to train models using clustering based on Dynamic Time Warping distance. The quality of new performances is evaluated based on the level of match/miss-match to each of the recorded training examples., This work has been partly sponsored by the Spanish TIN project TIMUL (TIN 2013-48152-C2-2-R), the European Union Horizon 2020 research and innovation programme under grant agreement No. 688269 (TELMI project), and the Spanish Ministry of Economy and Competitiveness under the Maria de Maeztu Units of Excellence Programme (MDM-2015-0502).
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

Evaluation of audio-based feedback technologies for bow learning technique in violin beginners

  • Blanco, Angel David
  • Ramírez, Rafael, 1966-
Comunicació presentada a: 1st ACM SIGCHI International Workshop on Multimodal Interaction for Education (MIE'17), celebrat en Glasgow (Regne Unit) el 13 de novembre de 2017., We present a study of the effects of feedback technologies on the learning process of novice violin students. Twenty-one subjects participated in our experiment, divided into two groups: Beginners (participants with no prior violin playing experience, N=14), and experts (participants with more than 6 years of violin playing experience, N=7). The beginners group was further divided into two: a group of beginners learning with Youtube videos (N=7), and a group of beginners with additional feedback related to the quality of their performance (N=7). Participants were asked to perform a violin exercise during 21 trials while their audio was recorded and analyzed. Three different audio descriptors were extracted from each audio in order to evaluate the quality of the performance: Dynamic stability, pitch stability and aperiodicity. Beginners showed a significant improvement during the session(i.e. by comparing the beginning and the end of the session)in the quality of the sound recorded, while experts maintained their results. However, only the beginner group with feedback showed significant improvement between the middle and late part of the session, while the group without feedback remained stable., This work has been partly sponsored by the Spanish TIN project TIMUL (TIN 2013-48152-C2-2-R), the European Union Horizon 2020 research and innovation programme under grant agreement No. 688269 (TELMI project), and the Spanish Ministry of Economy and Competitiveness under the Maria de Maeztu Units of Excellence Programme (MDM-2015-0502).
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

Hexaphonic guitar transcription and visualisation

  • Angulo, Iñigo
  • Giraldo, Sergio
  • Ramírez, Rafael, 1966-
Comunicació presentada a: Second International Conference on Technologies for Music Notation and Representation (TENOR 2016) celebrat del 27 al 29 de maig de 2016 a Cambridge, Regne Unit., Music representation has been a widely researched topic through centuries. Transcription of music through the conventional notation system has dominated the field, for the best part of the last centuries. However, this notational system often falls short of communicating the essence of music to the masses, especially to the people with no music training. Advances in signal processing and computer science over the last few decades have bridged this gap to an extent, but conveying the meaning of music remains a challenging research field. Music visualisation is one such bridge, which we explore in this paper. This paper presents an approach to visualize guitar performances, transcribing musical events into visual forms. To achieve this, hexaphonic guitar processing is carried out (i.e. processing each of the six strings as an independent monophonic sound source) to get music descriptors, which reflect the most relevant features of a sound to define/characterise it. Once this information is obtained, our goal is to analyse how different mappings to the visual domain can meaningfully/intuitively represent music. As a final result, a system is proposed to enrich the musical listening experience, by extending the perceived auditory sensations to include visual stimuli., This work has been partly sponsored by the Spanish TIN TIMUL project (TIN2013- 48152-C2-2-R) and the H2020-ICT-688268 TELMI project.
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

Jazz ensemble expressive performance modeling

  • Bantula, Helena
  • Giraldo, Sergio
  • Ramírez, Rafael, 1966-
Comunicació presentada a la 17th International Society for Music Information Retrieval Conference (ISMIR 2016), celebrada els dies 7 a 11 d'agost de 2016 a Nova York, EUA., Computational expressive music performance studies the analysis and characterisation of the deviations that a musician introduces when performing a musical piece. It has been studied in a classical context where timing and dynamic deviations are modeled using machine learning techniques. In jazz music, work has been done previously on the study of ornament prediction in guitar performance, as well as in saxophone expressive modeling. However, little work has been done on expressive ensemble performance. In this work, we analysed the musical expressivity of jazz guitar and piano from two different perspectives: solo and ensemble performance. The aim of this paper is to study the influence of piano accompaniment into the performance of a guitar melody and vice versa. Based on a set of recordings made by professional musicians, we extracted descriptors from the score, we transcribed the guitar and the piano performances and calculated performance actions for both instruments. We applied machine learning techniques to train models for each performance action, taking into account both solo and ensemble descriptors. Finally, we compared the accuracy of the induced models. The accuracy of most models increased when ensemble information was considered, which can be explained by the interaction between musicians., This work has been partly sponsored by the Spanish TIN project TIMUL (TIN2013-48152-C2-2-R) and the H2020-ICT-688269 TELMI project.
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

Bowing modeling for violin students assistance

  • Ortega, Fabio J. M.
  • Giraldo, Sergio
  • Ramírez, Rafael, 1966-
Comunicació presentada a: 1st ACM SIGCHI International Workshop on Multimodal Interaction for Education, que va tenir lloc el 13 de novembre de 2017 a Glasgow, UK., Though musicians tend to agree on the importance of practicing expressivity in performance, not many tools and techniques are available for the task. A machine learning model is proposed for predicting bowing velocity during performances of violin pieces. Our aim is to provide feedback to violin students in a technology–enhanced learning setting. Predictions are generated for musical phrases in a score by matching them to melodically and rhythmically similar phrases in performances by experts and adapting the bow velocity curve measured in the experts’ performance. Results show that mean error in velocity predictions and bowing direction classification accuracy outperform our baseline when reference phrases similar to the predicted ones are available., This work has been partly sponsored by the Spanish TIN project TIMUL (TIN 2013-48152-C2-2-R), the European Union Horizon 2020 research and innovation programme under grant agreement No. 688269 (TELMI project), and the Spanish Ministry of Economy and Competitiveness under the Maria de Maeztu Units of Excellence Programme (MDM-2015-0502).
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

Towards reward-based gamification in collaborative learning flow patterns based on learning analytics

  • Lobo Quintero, René Alejandro
  • Ortega Arranz, Alejandro
  • Hernández Leo, Davinia
Comunicació presentada al LASI-SPAIN 2020: Learning Analytics Summer Institute Spain 2020, celebrat del 15 al 16 de juny de 2020 a Valladolid, Espanya., Collaborative learning flow patterns (CLFPs) formulate good practices for the orchestration of activity sequences and collaboration mechanisms that can elicit fruitful social interactions. Despite their benefits, it is worth exploring how their implementation can be improved. The use of reward-based gamification strategies accompanied with Learning Analytics is one approach that can potentially. reinforce the participation and collaboration between participants, and at the same type help teachers to make decisions and measure the impact of the activities. This paper presents a first iteration for a model to integrate the use of gamification and learning analytics in collaborative learning activities structured following the Jigsaw and Pyramid CLFP. The applicability of the model is illustrated through two scenarios (face-to-face and MOOC settings)., This work has been partially funded by the Eu. Regional Development Fund and the National Research Agency of the Spanish Ministry of Science, Innovation and Universities, under project grants TIN2017-85179-C3-2-R, TIN2017-85179-C3-3-R. D. Hernández-Leo acknowledges the support by ICREA under the ICREA Academia programme.
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

Phrase-level modeling of expression in violin performances

  • Ortega, Fabio J. M.
  • Giraldo, Sergio
  • Ramírez, Rafael, 1966-
Comunicació presentada a: 10th International Workshop on Machine Learning and Music (MML), celebrat a Barcelona (Espanya), el 6 d'octubre de 2017., A model is proposed for predicting expressive variations in dynamics for violin performances with the purpose of facilitating expressive performance learning by students. The model uses phrases rather than single notes as units of analysis in a lazy learning approach: each phrase in a new score is matched to phrases from expressive performances by experts, adapting the experts’ transformations to render an expressive performance of the new score. In preliminary tests, the model approximates the dynamics of actual performances better than an unexpressive baseline model whenever the reference dataset contains melodies similar to those being predicted., This work has been partly sponsored by the Spanish TIN project TIMUL (TIN 2013-48152-C2-2-R), the European Union Horizon 2020 research and innovation programme under grant agreement No. 688269 (TELMI project), and the Spanish Ministry of Economy and Competitiveness under the Maria de Maeztu Units of Excellence Programme (MDM-2015-0502).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Un método para la separación del desvanecimiento a corto y largo plazo en comunicaciones vehiculares

  • Chakkour, Yousra
  • FERNÁNDEZ GONZÁLEZ, HERMAN ANTONIO
  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Reig, Juan|||0000-0003-4541-9326
[EN] In this contribution, we present a method for estimating the optimal size of moving average filter to ensure a precise separation of small and large scale fading effects. The analysis of small and large scale fading of the Vehicle-to-Vehicle (V2V) measured channel has been performed from narrowband channel measurements carried out in an urban environment at 5.9 GHz. Uniform intervals, where the channel process can be considered stationary, have been identified by comparing the cumulative distribution function (CDF) of the received envelope. A relationship between the length of the uniform intervals and the velocity of vehicles has been found. Moreover, the Rice K factor has been estimated for each one of these intervals. Our results showed that the proposed method is adequate to carry out a small and large scale fading separation. The results obtained make its use interesting to process correctly measured data in vehicular environments., Este trabajo ha sido financiado por el Ministerio de Economía, Industria y Competitividad de España a través del proyecto TEC2017-86779-C2-2-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Eficiencia espectral y capacidad en un canal MIMO masivo con alta densidad de usuarios

  • Alejandro Rodríguez Aparicio
  • Jesús R. Pérez
  • Luis Valle
  • TORRES JIMÉNEZ, RAFAEL PEDRO
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Reig, Juan|||0000-0003-4541-9326
[EN] This paper presents an analysis of the massive MIMO channel in an indoor picocell with a high number of active user terminals. The analysis is based on the results of a measurement campaign carried out in the 3.2 to 4 GHz band in a scenario of reduced size, in which users (up to 20) are placed in an orderly manner. In order to evaluate the performance of the resulting massive MIMO channel, results concerning both the sum capacity as well as the spectral efficiency are included. Furthermore and concerning the channel spectral efficiency, an analysis showing the spread and differences between the individual contributions of each active user is reported and discussed., Este trabajo ha sido financiado por los proyectos del Plan Estatal de Investigación Científica y Técnica y de Innovación TEC2017-86779-C2-1-R y TEC2017-86779-C2-2-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Modelado de las pérdidas de propagación en un escenario de oficinas en bandas de milimétricas

  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Reig, Juan|||0000-0003-4541-9326
  • Molina-García-Pardo, José María
  • Pérez, Jesús R.
  • Torres, Rafael P.
  • Fernández, Herman
  • Valle, Luis
  • Basterrechea, José
  • Domingo, Marta
[EN] In this conference contribution, we present millimeter-wave (mmWave) propagation measurements for an office environment from 25 to 40 GHz and investigate the path loss using the most common empirical models proposed in WINNER-II and adopted by the 3GPP: the single-frequency floating-intercept (FI) model, the single-frequency close-in (CI) free space reference distance model, the multi-frequency alphabeta-gamma (ABG) model and the close-in free space reference distance with frequency path loss exponent (CIF). Both line-ofsight (LOS) and obstructed-LOS (OLOS) propagation conditions have been considered. The mean value of the model parameters, and their 95 % confidence intervals, have been derived using regression and optimization techniques., Este trabajo ha sido financiado en parte por el Ministerio de Economia, Industria y Competitividad a traves de los proyectos TEC2016-78028-C3-2-P, TEC2017-86779-C2-1-R y TEC2017-86779-C2-2-R, a traves de la Agencia Estatal de Investigacion (AEI) y el Fondo Europeo de Desarrollo Regional (FEDER) y por COLCIENCIAS en Colombia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Análisis experimental de un canal massive MIMO en una picocelda de interior

  • Torres, Rafael P.
  • Pérez, Jesús R.
  • Basterrechea, José
  • Valle, Luis
  • Domingo, Marta
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Reig, Juan|||0000-0003-4541-9326
[EN] This paper presents an analysis of the massive MIMO channel in an indoor picocell. The analysis is based on the results of a measurement campaign carried out in the 3.2 to 4 GHz band in a scenario of reduced size and with a symmetrical geometry. It is well known that the performance of massive MIMO systems depends largely on the fact that the radio channel meets the condition of favorable propagation. In order to evaluate the performance of the resulting massive MIMO channel, results concerning the sum capacity are included. A second factor that determines the performance of massive MIMO systems when it is operated in a TDD-OFDM framework is the frequency selectivity of the channel that limits the size of the coherence block. In this sense, results of the coherence bandwidths achieved are also presented and analyzed., Este trabajo ha sido financiado por los proyectos del Plan Estatal de Investigación Científica y Técnica y de Innovación TEC2017-86779-C2-1-R y TEC2017-86779-C2-2-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

ELiRF-UPV at TASS 2020: TWilBERT for Sentiment Analysis and Emotion Detection in Spanish Tweets

  • González-Barba, José Ángel
  • Arias-Moncho, José
  • Pla Santamaría, Ferran
  • Hurtado Oliver, Lluis Felip|||0000-0002-1877-0455
[EN] This paper describes the participation of the ELiRF research group of the Universitat Politècnica de València in the TASS 2020 Workshop, framed within the XXXVI edition of the International Conference of the Spanish Society for the Processing of Natural Language (SEPLN). We present the approach used for the Monolingual Sentiment Analysis and Emotion Detection tasks of the workshop, as well as the results obtained. Our participation has focused mainly on employing an adaptation of BERT for text classification on the Twitter domain and the Spanish language. This system, that we have called TWilBERT, shown systematic improvements of the state of the art in almost all the tasks framed in the SEPLN conference of previous years, and also obtains the most competitive performance in the tasks addressed in this work., This work has been partially supported by the Spanish MINECO and FEDER founds under project AMIC (TIN2017-85854-C4-2-R) and by the GiSPRO project (PROMETEU/2018/176). Work of José-Ángel González is financed by Universitat Politècnica de València under grant PAID-01-17.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Deep learning for MRI-based CT synthesis: a comparison of MRI sequences and neural network architectures

  • Larroza, Andrés
  • Álvarez-Gómez, Juan Manuel
  • Espinós-Morató, Héctor
  • Vergara-Díaz, Marina
  • Moliner Martínez, Laura
  • Oliver-Gil, Sandra|||0000-0001-8258-3972
  • Rodríguez-Álvarez, M.J.|||0000-0001-8333-8792
[EN] Synthetic computed tomography (CT) images derived from magnetic resonance images (MRI) are of interest for radiotherapy planning and positron emission tomography (PET) attenuation correction. In recent years, deep learning implementations have demonstrated improvement over atlasbased and segmentation-based methods. Nevertheless, several open questions remain to be addressed, such as which is the best of MRI sequences and neural network architectures. In this work, we compared the performance of different combinations of two common MRI sequences (T1- and T2-weighted), and three state-of-the-art neural networks designed for medical image processing (Vnet, HighRes3dNet and ScaleNet). The experiments were conducted on brain datasets from a public database. Our results suggest that T1 images perform better than T2, but the results further improve when combining both sequences. The lowest mean average error over the entire head (MAE = 101.76 ± 10.4 HU) was achieved combining T1 and T2 scans with HighRes3dNet. All tested deep learning models achieved significantly lower MAE (p < 0.01) than a well-known atlas-based method., This work was supported by the Spanish Government grants TEC2016-79884-C2 and RTC-2016-5186-1, and by the European Union through the European Regional Development Fund (ERDF)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

LES study on spray combustion with renewable fuels under ECN Spray-A conditions

  • Mira Martínez, Daniel
  • Pérez-Sánchez, Eduardo J.
  • Surapaneni, Anurag
  • De Leon-Ceriani, Daiana
  • Benajes, Jesús|||0000-0002-1653-9188
  • García-Oliver, José M|||0000-0002-2676-9681
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
[EN] Poly-Oxymethylene Dimethyl Ethers (OMEx) are being intensively investigated because of their potentially renewable synthesis path, which make them suitable as liquid fuels for low-carbon transport applications. In the present contribution, a computational study on the difference in combustion characteristics between dodecane and OMEx-type fuels under Engine Combustion Network (ECN) Spray A conditions is reported. In particular, a blend of different OMEx fuels have been investigated and compared to dodecane, which is a more conventional diesellike fuel. The modelling framework consists of a high-fidelity LES approach together with a Eulerian-Lagrangian spray model and flamelet-based turbulent combustion model. Results indicate ignition delay time and lift-off length according to the fuel reactivity properties, with the OMEx fuel performing similarly to dodecane. Flamelet calculations show that ignition of the oxygenated fuels is in general similar to that of dodecane, but it occurs at higher mixture fraction values due to the differences in stoichiometry. One of the most relevant outcomes of the study is the important effect that the oxygenated characteristics of OMEx has on the flame structure. Results show that for OMEx the reaction front is stabilized at distances closer to the nozzle than for dodecane, and that the flame shape as well as its internal structure is clearly affected., The research leading to these results has received funding through the ENERXICO project from the European Union's Horizon 2020 Programme, grant agreement n° 828947, and from the Mexican Department of Energy, CONACYT-SENER Hidrocarburos grant agreement n° B-S-69926 and the Spanish Ministry of Economy and Competitiveness in the frame of the CHEST project (TRA2017-89139-C2-2-R). Furthermore, computer resources and technical assistance has been provided by the Red Espanola de Supercomputación (RES) (IM-2021-1-00214, IM-2020-3-0029, IM-2020-2-0023,IM-2020-1-0013).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Enhanced Pockels effect in strained silicon by means of a SiGe/Si/SiGe slot structure

  • Olivares-Sánchez-Mellado, Irene
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
[EN] A slot waveguide structure made of a SiGe/Si/SiGe heterojunction is proposed to enhance Pockels effect in strained silicon. The strain is applied via lattice mismatch between layers, while the slot configuration optimizes the overlap between the optical and electric field inside the strained silicon., Funding from projects TEC2016-76849 (MINECO/FEDER, UE) and PROMETEO/2019/123 (Generalitat Valenciana) is acknowledged. Irene Olivares acknowledges the UPV for funding her research staff training (FPI) grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Optimización de la configuración de una sonda de canal en el dominio de la frecuencia en bandas de milimétricas

  • Catalá-Lahoz, Cristina|||0000-0002-9425-9077
  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Reig, Juan|||0000-0003-4541-9326
[EN] In this contribution to the conference, we present different methods to improve the dynamic range of mobile radio channel measurements using a channel sounder in the frequency domain for millimeter wave (mmWave) propagation measurements. The advantages of using a radio over fiber (RoF) link are explained to avoid the losses introduced by a coaxial cable in measurements carried out in indoor and outdoor environments. Furthermore, measurements are carried out in a laboratory environment in order to obtain the optimal configuration parameters to carry out large measurement campaigns in the shortest possible time while maintaining the highest possible dynamic range and the correct calculation of the dispersion parameters. Finally, a simple protocol is disclosed to obtain the optimal parameters mentioned through three short steps., Este trabajo ha sido financiado en parte por el Ministerio de Economía, Industria y Competitividad a través del proyecto TEC2017-86779-C2-2-R (AEI/FEDER, UE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

MIMO Equalization for Two-Mode Division Multiplexing over Standard SMF at 850 nm

  • Medina-Sevila, Pau
  • Almenar Terre, Vicenç|||0000-0002-8742-2315
  • Corral, Juan L.|||0000-0003-0857-5207
[EN] Multiple-input multiple-output (MIMO) receivers are proposed to cope with the signal distortion caused by modal coupling, induced by (de)multiplexers, and modal dispersion in mode-division multiplexing systems over single-mode fiber (SSMF) at 850 nm., This work was supported by the Spanish Ministerio de Economia y Competitividad under projects TEC2015 -70858 -C2 - 2 -R and TEC2015 -70858 -C2 - 1 -R, both with FEDER funds. The work of P. Medina was supported by the Formación de Personal Investigador grant program of the Universitat Politècnica de València
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Experimental Rician K-factor characterization in a laboratory environment at the 25 to 40 GHz frequency band

  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Reig, Juan|||0000-0003-4541-9326
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Fernández, Herman
[EN] In this work, an analysis of the Rician K-factor in a laboratory environment from 25 to 40 GHz has been carried out. The variation of the estimated K-factor has been assessed in frequency from a channel measurements campaign in both line-of-sight (LOS) and non-LOS (NLOS) conditions. Mean values of the K-factor ranging from 0.48 to 3.43 dB for LOS conditions, and from -5.54 to -0.56 dB for NLOS conditions, have been derived. The results reported here enable us to get insight into the propagation channel characteristics and can be of interest to evaluate the performance of fifth-generation (5G) networks in laboratory environments., This work has been funded in part by the Spanish Ministerio de Economia, Industria y Competitividad under the project TEC2017-86779-C2-2-R, and by COLCIENCIAS in Colombia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Análisis experimental del canal MIMO masivo en un entorno de oficina en ondas milimétricas

  • Avellán, Cristina
  • Torres, Rafael P.
  • Pérez, Jesús R.
  • Valle, Luis
  • Fernández, Hermán
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Reig, Juan|||0000-0003-4541-9326
[EN] Massive multiple-input multiple-output (MIMO) is considered an enabling technology to achieve large capacities in multi-user scenarios in the upcoming mobile networks (5G and beyond). In this paper, the performance of the massive MIMO concept is investigated from measurement data at millimeter wave (mmWave) frequencies. The measurements were collected in an indoor office environment from 25 to 40 GHz in the frequency domain, using a virtual uniform rectangular array (URA) at the base station consisting of 144 (12×12) antennas. Line-of-Sight (LOS) and Obstructed-LOS (OLOS) propagation conditions have been considered. Both the favorable propagation condition and the achievable capacity are analysed in terms of active users and number of antennas placed at the base station. The results are particularised at the 26, 28 and 38 GHz bands adopted for the deployment of future wireless communication networks., Este trabajo ha sido financiado en parte por el Ministerio de Economía, Industria y Competitividad a través de los proyectos TEC2017-86779-C2-1-R y TEC2017-86779-C2-2-R, a través de la Agencia Estatal de Investigación (AEI) y el Fondo Europeo de Desarrollo Regional (FEDER).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Modelado del scattering difuso en la banda de milimétricas

  • Andani, Francisco Javier
  • Pérez, Jesús R.
  • Torres, Rafael P.
  • Valle, Luis
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Reig, Juan|||0000-0003-4541-9326
[EN] Propagation channel models based on ray-tracing techniques can estimate, with some details, the specular multipath components reaching the receiver antenna, but have difficulty to estimate diffuse components. In this paper, an empirical model to include diffuse scattering in ray-tracing channel models, or channel simulators, is proposed. The diffuse scattering model has been developed from channel measurements collected from 25 to 40 GHz in the frequency domain, in both line-of-sight (LOS) and obstructed-LOS (OLOS) propagation conditions, in an office environment. The accuracy of a raytracing software to estimate time-dispersion metrics is evaluated when the diffuse scattering model is taken into account., Este trabajo ha sido financiado en parte por el Ministerio de Economía, Industria y Competitividad a través de los proyectos TEC2017-86779-C2-1-R y TEC2017-86779-C2-2- R, a través de la Agencia Estatal de Investigación (AEI) y el Fondo Europeo de Desarrollo Regional (FEDER).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Influence of pollution build-up and pavement cross section on permeable pavements under extreme rainfall events

  • Fernández-Gonzalvo, Miriam Inmaculada
  • Hernández Crespo, Carmen|||0000-0002-6727-0481
  • Martín Monerris, Miguel|||0000-0001-7464-9505
  • Andrés-Doménech, Ignacio|||0000-0003-4237-4863
[EN] Permeable pavement systems (PPS) are part of the stormwater management technologies known as Sustainable Urban Drainage Systems (SUDS). The main objective of this is to analyse its buffering capacity (quantity and quality of filtered water) under extreme rainfall events. To this end, two different pavement cross-sections, complete configuration (C1) and simple configuration (C2), have been tested at laboratory scale for the 25-year return period 10-min intensity rainfall in Valencia (Spain). Four different pollutant build-up levels have been studied (at one, three, six and 12 months). For all the simulated rainfall events, the quantity (hydrographs and drained volume) and quality (DQO, TSS, TN and TP concentrations) of filtered water were characterized. On the one hand, configuration C1 reduced more than C2 the peak flow of filtered water for the same dirt and dust build-up. Moreover, peaks are wider in time, so the filtered water is better distributed. Regarding the influence of pollution build-up level, it can be observed that higher dust and dirt build-up gave rise to lower flow rates. In general, the larger the quantity of pollutant build-up accumulated on the pavement surface, the larger the volume of water was retained because it absorbed part of the rain, thus smoothing the peak flow of filtered water. On the other hand, the pollutant mass leached from the pavement C1 is lower than C2. When the amount of dust and dirt deposited was lower, the rainfall was able to leach more pollutant with respect to the total mass deposited. The results show the importance of an adequate cleaning program with a frequency no lower than once a month and a better response, in terms of water pollution retention, of the complete configuration (C1) during times of heavy rainfall., This research has been developed within the SUPRIS-SUPel project framework (Ref. BIA2015-6540-C2-2-R MINECO/FEDER, EU). This project had been financed by the Ministry of Economy and Competitiveness of Spain through the General State Budget and the European Regional Development Fund (ERDF). Currently, the second phase of the project, ENGODRAIN ¿ RTI2018-094217-B-C31, financed by the State Agency for Research from Spain through the General State Budget and the European Regional Development Fund (ERDF), is continuing. The authors would also like to thank the companies Quadro Concrete Prefabs S.L., TenCate Geosynthetics Iberia S.L., Atlantis SUDS S.L. and SECOPSA for supplying materials for the tests. Finally, the hiring of Miriam Inmaculada Fernández Gonzalvo has been possible to the program of subsides for hiring of pre-doctoral research personnel (ACIF/2018/111) of the Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Modelling and control of interlinking converters between AC and DC buses in grid-connected microgrids

  • Liberos, Marian|||0000-0001-6574-1158
  • González-Medina, Raúl|||0000-0003-0378-5045
  • Garcerá, Gabriel|||0000-0002-5507-4379
  • Figueres Amorós, Emilio|||0000-0002-0716-3916
This work develops the synchronous reference frame control of an interlinking converter between the DC and the AC bus of hybrid microgrids. The interlinking converter is based on two parallel connected inverters. A 3D Space Vector Modulator is proposed to avoid the presence of circulating currents between inverters., This work is supported by the Spanish Ministry of Economy and Competitiveness (MINECO), the European Regional Development Fund (ERDF) under Grant ENE2015-64087-C2-2-R and the Spanish Ministry of Education (FPU15/01274.).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Transmisiones a 28GHz y 37GHz en interiores de trenes aplicando técnicas MISO-OFDM

  • Sanchis Borrás, Concepción
  • Molina-García-Pardo, José-María
  • Pascual García, Juan
  • Llacer, Leandro J.
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Reig, Juan|||0000-0003-4541-9326
[EN] This paper analyses a simulation of performance in an intra-wagon environment based on four scenarios. The 28 GHz and the 37 GHz bands are assessed for the use of 5G millimeter (mmWave) communications. The main objective was to analyses different multiple-input single-output orthogonal frequency division multiplexing (MISO-OFDM) techniques such as Hadamard quasiorthogonal space-time block code (HQSTBC) and transmit beamforming to analyze the throughput achieved as a function of the signal-to-noise ratio (SNR) applied. Starting from a measurement campaign, the performance is analyzed by scenario, applied band and in terms of the two algorithms used. In addition, the results are simulated with 4 and 8 transmitting antennas., Este trabajo ha sido financiado en parte por los proyectos PID2019-107885GB-C33 y TEC2017-86779-C2-2-R (AEI/FEDER, UE). Agradecer a Julia Iserte Villalba y Francisco M. Brox Lopez (personal de FGV) por facilitar la campaña de medidas.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Using the MGGI Methodology for Category-based Language Modeling in Handwritten Marriage Licenses Books

  • Romero Gómez, Verónica
  • Fornes, Alicia
  • Vidal, Enrique|||0000-0003-4579-5196
  • Sánchez Peiró, Joan Andreu|||0000-0003-0423-2020
Handwritten marriage licenses books have been used for centuries by ecclesiastical and secular institutions to register marriages. The information contained in these historical documents is useful for demography studies and genealogical research, among others. Despite the generally simple structure of the text in these documents, automatic transcription and semantic information extraction is difficult due to the distinct and evolutionary vocabulary, which is composed mainly of proper names that change along the time. In previous works we studied the use of category-based language models to both improve the automatic transcription accuracy and make easier the extraction of semantic information. Here we analyze the main causes of the semantic errors observed in previous results and apply a Grammatical Inference technique known as MGGI to improve the semantic accuracy of the language model obtained. Using this language model, full handwritten text recognition experiments have been carried out, with results supporting the interest of the proposed approach., This work has been partially supported through the European Union’s H2020 grant READ (Ref: 674943), the European project ERC-2010-AdG-20100407-269796, the MINECO/FEDER, UE projects TIN2015-70924-C2-1-R and TIN2015-70924-C2-2-R, and the Ramon y Cajal Fellowship RYC-2014-16831.
Repositori Institucional UIB
Publicación Capítulo o parte de un libro (BookPart)

Towards Multi Session Visual SLAM in Underwater Environments Colonized with Posidonia Oceanica

  • Burguera Burguera, Antonio
  • Bonin-Font, Francisco
[eng] This paper describes a multi-session monocular SLAM approach addressed to underwater environments. It has three main blocks: a) visual odometry, b) loop-closing detection; loop closings inside each individual session are found applying feature matching with RANSAC, and since no geometric relation between images of different sessions is available, multi-session loop closings are detected via an image hash matching procedure, alleviating also the computational cost of the image comparisons, and c) an Iterated Extended Kalman Filter (IEKF) based optimization process used to refine the different individual trajectories and to join the different maps; the global optimization process (map joining) can be delayed until certain number of loop closings are found, reducing the global running time. Several experiments using marine imagery in areas colonized with Posidonia Oceanica show the robustness of this approach.
Repositori Institucional UIB
Publicación Contribución de congreso (ConferenceOutput)

Integración de parcelas de inventario y de teledetección para modelizar la recuperación post-incendio de comunidades arbóreas mediterráneas

  • Rodrigues, M.
  • De la Riva, J.
  • Domingo, D.
  • Lamelas, M. T.
  • Ibarra, P.
  • Hoffrén, R.
  • García-Martín, A.
[spa] En este estudio se analiza el potencial de recuperación post-incendio de cuatro comunidades arbóreas mediterráneas representativas (Pinus halepensis, Pinus nigra, Pinus pinaster y Quercus ilex) afectadas por grandes incendios forestales (> 500 ha) durante el verano de 1994 en España. Para ello, se combinó información recogida en campo 25 años después de los incendios en 203 parcelas arboladas (131 quemadas y 72 de control sin quemar) con datos de teledetección, información geoespacial e inventarios forestales, con el fin de construir un modelo empírico capaz de evaluar el grado de recuperación. Los datos de teledetección permitieron calcular la severidad del fuego mediante el Composite Burn Index, mientras que la topografía local (pendiente y orientación) fueron obtenidos de modelos digitales del terreno creados a partir de datos LiDAR-PNOA. Los datos geoespaciales incluían información climática sobre la evolución de la temperatura y las precipitaciones. Estos datos se introdujeron en el modelo, calibrado mediante Random Forest, para conocer el grado de recuperación, inferido a partir de la similitud (en términos de altura de la vegetación, biomasa aérea y diversidad de especies) entre las parcelas quemadas y las no quemadas (control). Los resultados mostraron que sólo el 25% de las parcelas quemadas pueden ser consideradas como recuperadas. La severidad del fuego a corto plazo tiene un efecto significativo en la recuperación, aunque fuertemente modulado por la topografía local. Las características clave de las parcelas recuperadas fueron una severidad del fuego de baja a moderada y un entorno topográfico favorable, especialmente el efecto de sombreado de las laderas con orientación noroeste. Además, un clima más cálido y húmedo parece incrementar la capacidad de recuperación.
Repositori Institucional UIB
Publicación Capítulo o parte de un libro (BookPart)

A Novel Approach to Register Sonar Data for Underwater Robot Localization

  • Burguera, Antoni
[eng] This paper proposes a novel approach to perform underwater robot localization using sonar data. The proposal relies on two key points: 1) the processing of the sonar measurements to build probabilistic point clouds; and 2) the registration of these point clouds. These key points are achieved by means of an acoustic model that removes the effects of the uneven ensonification followed by a probabilistic interpretation of the sonar measurements. Also, a registration algorithm is presented and used to match consecutively gathered scans in order to globally localize an autonomous underwater vehicles (AUV).
Repositori Institucional UIB
Publicación Capítulo o parte de un libro (BookPart)

Machine Learning and Deep Learning Strategies to Identify Posidonia Meadows in Underwater Images

  • González-Cid, Yolanda
  • Burguera, Antoni
  • Bonin-Font, Francisco
  • Matamoros, Alejandro
[eng] This paper describes how to automatically identify Posidonea Oceanica (P.O.) from seabed images gathered by a bottom-looking camera. Different methods based on machine learning and deep learning algorithms are presented and compared. On the one hand, texture descriptors and co-occurrence matrices are used to characterize the images and classify the P.O. regions by means of Support Vector Machine and Artificial Neural Networks. On the other hand, Convolutional Neural Networks are used in the Deep Learning approach. The experimental results obtained demonstrate the effectiveness of the algorithms proposed to automatically identify P.O. meadows in underwater images.
Repositori Institucional UIB
Publicación Capítulo o parte de un libro (BookPart)

Building High Resolution Maps of Large Subsea Areas using Side-Scan Sonar

  • Burguera, Antoni
  • Oliver, Gabriel
[eng] The goal of this study is to generate highresolution sea floor maps using a Side-Scan Sonar (SSS) on board of an Autonomous Underwater Vehicle (AUV). This is achieved by explicitly taking into account the SSS operation as follows. First, the raw SSS data is corrected both in intensity, by removing the effects of the uneven ensonification pattern, and range, by projecting the data to the sea floor. Second, the AUV pose is estimated continuously. Third, a probabilistic SSS model is defined and used to estimate the probability of each sea-floor region to be observed. This probabilistic information is then used to weight the contribution of each SSS measurement to the map. Because of these models, arbitrary map resolutions can be achieved, even beyond the sensor resolution.
Repositori Institucional UIB
Publicación Capítulo o parte de un libro (BookPart)

Building Large-Scale Coverage Maps of Posidonia Oceanica using an Autonomous Underwater Vehicle

  • Burguera, Antoni
  • Bonin-Font, Francisco
  • García-Fidalgo, Emilio
[eng] This paper proposes a method to build large scale coverage maps of Posidonia Oceanica (P.O.) using the imagery provided by an AUV endowed with a bottom-looking camera. The process begins by detecting the regions containing P.O. in each individual image. Afterwards, the overlap between images is searched and the P.O. detection data in these overlapping regions is fused to build a global detection map. The paper proposes three different descriptors to detect P.O. in individual images and five strategies to fuse the overlapping regions. The experiments, performed in coastal areas of Mallorca, evaluate and compare the proposed descriptors and fusion techniques, showing that our approach surpasses the 91% detection rate.
Repositori Institucional UIB
Publicación Capítulo o parte de un libro (BookPart)

Towards Automatic Visual Sea Grass Detection in Underwater Areas of Ecological Interest

  • Burguera, Antoni
  • Bonin-Font, Francisco
  • Lisani, José Luis
  • Petro, Ana Belén
  • Oliver, Gabriel
[eng] In areas of ecological interest, the detection and control of seaweed such as Posidonia Oceanica is usually performed by divers. Due to the limited capacity of the scuba tanks and the human security protocols, this task involves several short immersions leading to poor temporal and spatial data resolution. Thus, it is desirable to automate this task by means of underwater robots. This paper describes a method to autonomously detect Posidonia Oceanica in the imagery gathered by an underwater robot. The proposed approach uses a set of Gabor filters to characterize an image. This characterization is used to detect the regions containing seaweed by means of a Support Vector Machine. The experiments, conducted with an Autonomous Underwater Robot in several marine areas of Mallorca, show promising results towards the automated seafloor classification from extended video sequences.
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Modelo basado en optimización y bases de datos

  • Simón Gómez, Vicente
  • Muñoz de la Peña Sequedo, David
  • Álamo Cantarero, Teodoro
[Resumen] En esta comunicación se aborda el problema de la identificación de sistemas por medio de la implementación de un modelo (MBD) basado en optimización y que usa una base de datos para predecir los estados futuros de un sistema. Este modelo predice un estado futuro a partir del comportamiento de los estados pasados recogidos en una base de datos resolviendo un problema de optimización. Esta base de datos recoge un histórico de las trayectorias llevadas a cabo por el sistema. Por último, se estudia el MBD sobre un sistema real y conocido analizándose luego los resultados en bucle abierto y bucle cerrado con las ecuaciones diferenciales del sistema., Trabajo financiado por el Ministerio de Economía y Competitividad a través del proyecto Estimación y Optimización Dinámica de la Eficiencia en Infraestructuras Críticas (DPI2013-48243-C2-2-R), https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Diseño de un sistema de control de estabilización de un buque de alta velocidad basados en técnicas QFT

  • Muñoz-Mansilla, Rocío
  • Martínez, José Manuel
  • Chaos, Dictino
  • Moreno-Salinas, David
  • Aranda, Joaquín
[Resumen] Este trabajo presenta el diseño de un sistema de control de estabilización de un buque de alta velocidad (BAV) para mejorar el confort y seguridad en el transporte marítimo. El objetivo es conseguir la amortiguación de las dinámicas acopladas de arfada, cabececeo y balance mediante el uso de superficies de estabilización activa (aletas de proa, de popa y laterales). La metodología empleada se basa en la técnica de control robusto en el dominio de la frecuencia denominada Teoría de la Realimentación Quantitativa QFT (Quantitative Feedback Theory). En este trabajo se van a presentar dos aproximaciones, dependiendo del nivel de acoplamiento debido a la acción de los actuadores. En la primera solución, se considera un nivel de acoplamiento bajo y se diseñan de forma separada los controladores para las dinámicas longitudinal y transversal. En la segunda solución, se considera un nivel de acoplamiento alto debido a la acción de los actuadores. En este caso se emplea una combinación de la técnica QFT y Asignación de Autoestructuras (AE). Para las dos aproximaciones, los análisis de las simulaciones temporales para diferentes estados de la mar y ángulos de incidencia del oleaje demuestran resultados satisfactorios y se consigue el amortiguamiento. Se demuestra con ello que las técnicas de control robusto basadas en las metodologías QFT resultan factibles y apropiadas para el control de estabilización de sistemas marinos avanzados, pues resuelven la problemática en diferentes velocidades y ángulos de incidencia., Este trabajo ha sido realizado gracias al apoyo del Ministerio de Economía y Competitividad bajo el proyecto DPI2013-46665-C2-2-R, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Grounding the Semantics of Part-of-Day Nouns Worldwide using Twitter

  • Vilares, David
  • Gómez-Rodríguez, Carlos
Held 6 June 2018, New Orleans, Louisiana, USA., [Absctract]: The usage of part-of-day nouns, such as ‘night’, and their time-specific greetings (‘good night’), varies across languages and cultures. We show the possibilities that Twitter offers for studying the semantics of these terms and its variability between countries. We mine a worldwide sample of multilingual tweets with temporal greetings, and study how their frequencies vary in relation with local time. The results provide insights into the semantics of these temporal expressions and the cultural and sociological factors influencing their usage., DV and CGR receive funding from the European Research Council (ERC), under the European Union’s Horizon 2020 research and innovation programme (FASTPARSE, grant agreement No 714150), from the TELEPARESUDC project (FFI2014-51978-C2-2-R) and the ANSWER-ASAP project (TIN2017-85160-C2-1- R) from MINECO, and from Xunta de Galicia (ED431B 2017/01)., Xunta de Galicia; ED431B 2017/01
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Control predictivo no lineal tolerante a fallos en una planta de tratamiento de aguas residuales

  • Sánchez Fernández, Álvar
  • Francisco, Mario
  • Fuente, María Jesús
  • Vega, Pastora
[Resumen] En este trabajo se pretende diseñar un control tolerante a fallos, es decir un sistema que sea capaz de detectar cambios en el sistema que puedan provocar que el proceso abandone su modo de funcionamiento normal, y reconfigurar el controlador para que el sistema siga funcionando a pesar de los fallos. El sistema está formado por un controlador base, en este caso un control predictivo no lineal, un módulo de detección e identificación de fallos basado en el análisis de componentes principales (PCA) y un método de reconfiguración del controlador, que en este caso consiste en sustituir los sensores que fallan por un sensor software calculado con información del resto de las variables del sistema. Este sistema se ha probado en una planta de tratamiento de aguas residuales, y los resultados obtenidos muestran un funcionamiento adecuado a pesar de los fallos., Los autores desean agradecer a la Comisión Europea y al Ministerio de Economía y Competitividad de España por su apoyo financiero a través de los proyectos DPI20015-67341-C2-1-R y DPI20015-67341-C2-2-R, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Modelo dinámico para el despliegue automático de una barrera de contención de vertidos marinos

  • Jiménez, Juan
  • Girón-Sierra, José María
  • Chaos, Dictino
[Resumen] El presente trabajo presenta un modelo dinámico para el estudio del movimiento de una barrera de contención de vertidos marinos, cuando es remolcada por un par de barcos. Se describen los fundamentos seguidos en el modelado de la barrera, así como en el de los barcos remolcadores. A continuación, se presentan algunos escenarios básicos de remolque de las barreras, así como las implicaciones para el control del movimiento coordinado de los barcos que la remolcan. Por último, se presentan algunas conclusiones y posibles líneas de trabajo futuras., Los autores agradecen la financiación recibida de los proyectos: DPI2013-46665-C02-1-R y DPI2013-46665-C02-2-R: “Sistema Autónomo para la Localización y Actuación ante Contaminantes en el Mar", de la que es parte el presente trabajo, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Influencia de la visualización en terapias de rehabilitación virtual asistidas por robots

  • Lledó Pérez, Luis Daniel
  • Ezquerro, Santiago
  • Badesa, Francisco Javier
  • Ñeco, Ramón
  • Sabater-Navarro, J. M.
  • García-Aracil, Nicolás
[Resumen] La neurorehabilitación post-ictus basada en terapias virtuales se realiza junto con dispositivos visuales. El tipo de visualización puede influenciar en la calidad de la percepción de la tarea afectando al rendimiento sensomotor del paciente. El propósito de este trabajo es evaluar si existe diferencias en los patrones de movimientos cinemáticos cuando pacientes post-ictus realizan una tarea de alcance, visualizando un juego terapéutico virtual con dos diferentes tipos de representación del entorno virtual: 2D y 3D. En este estudio han participado nueve pacientes post-ictus recibiendo una terapia virtual asistida por el robot de rehabilitación PUPArm. Los pacientes deb´ian realizar movimientos horizontales con el miembro superior para completar el objetivo principal de las tareas, el cuál consistía en alcanzar objetivos perif´ericos o perspectivos dependiendo del tipo de entorno virtual mostrado. Para realizar un análisis del rendimiento sensomotor de los pacientes se registran diferentes tipos de parámetros a partir de la adquisición de datos objetivos por parte del dispositivo robótico para evaluar la influencia de la visualización de la tarea., Este trabajo ha sido financiado por la Comisión Europea a través del proyecto HomeRehab: Echord++ (GA 601116) y por el Ministerio de Economía y Competitividad a través del proyecto DPI2015-70415-C2-2-R, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Global Transition-based Non-projective Dependency Parsing

  • Fernández-González, Daniel
  • Shi, Tianze
  • Lee, Lillian
56th Annual Meeting of the Association for Computational Linguistics, ACL 2018. Melbourne15 July - 20 July 2018., [Absctract]: Shi, Huang, and Lee (2017a) obtained state-of-the-art results for English and Chinese dependency parsing by combining dynamic-programming implementations of transition-based dependency parsers with a minimal set of bidirectional LSTM features. However, their results were limited to projective parsing. In this paper, we extend their approach to support non-projectivity by providing the first practical implementation of the MH4 algorithm, an Opn4q mildly non projective dynamic-programming parser with very high coverage on non-projective treebanks. To make MH4 compatible with minimal transition-based feature sets, we introduce a transition-based interpretation of it in which parser items are mapped to sequences of transitions. We thus obtain the first implementation of global decoding for non-projective transition-based parsing, and demonstrate empirically that it is more effective than its projective counterpart in parsing a number of highly non-projective languages., We thank the three anonymous reviewers for their helpful comments. CG has received funding from the European Research Council (ERC), under the European Union’s Horizon 2020 research and innovation programme (FASTPARSE, grant agreement No 714150), from the TELEPARESUDC project (FFI2014-51978-C2-2-R) and the ANSWER-ASAP project (TIN2017-85160-C2-1-R) from MINECO, and from Xunta de Galicia (ED431B 2017/01). TS and LL were supported in part by a Google Focused Research Grant to Cornell University. LL was also supported in part by NSF grant SES-1741441. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation or other sponsors ., Xunta de Galicia; ED431B 2017/01, Estados Unidos. National Science Foundation; SES-1741441
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Exploración de entornos mediante robots autónomos basada en modelos de reacción difusión

  • Vázquez-Otero, Alejandro
  • Faigl, Jan
  • Duro, Natividad
  • Dormido, Raquel
[Resumen] Este artículo introduce un marco computacional basado en los principios dinámicos de los sistemas de reacción-difusión (RD). El enfoque propuesto es una extensión de un trabajo previo donde se utilizaron principios similares para desarrollar un algoritmo de planificación de trayectorias. En el presente trabajo, se propone la resolución de una tarea de exploración para un robot móvil autónomo. Además de la tarea de exploración para un robot móvil, el algoritmo se extiende para incluir exploración colaborativa de un número indefinido de robots., Este trabajo ha sido soportado por los proyectos DPI2011-27818-C02-02, DPI2012-31303, y DPI2014-55932-C2-2-R, del Ministerio Español de Economía y Competitividad y Fondos Feder, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Algoritmo para la detección automática de sangrados quirúrgicos utilizando visión por computador

  • García Martínez, Álvaro
  • Vicente-Samper, José María
  • Juan Poveda, Carlos Gabriel
  • Sabater-Navarro, J. M.
[Resumen] El trabajo presenta el diseño y resultados obtenidos con un algoritmo de visión artificial para la detección automática de sangrados utilizando imágenes laparoscópicas o imágenes de mini-robots camarógrafos. El algoritmo se fundamenta en el cálculo de umbrales dinámicos en el espacio de color. Se muestran los resultados obtenidos con imágenes de videos de operaciones reales y con el sistema experimental desarrollado para este trabajo., Los autores quieren agradecer el apoyo económico del Consejo Nacional de Investigación de España a través del proyecto DPI2013-47196-C3-2-R. Carlos G. Juan agradece al Ministerio de Educación, Cultura y Deporte (MECD) del Gobierno de España su apoyo a través del Programa de Formación del Profesorado Universitario (FPU), https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Módulo didáctico para la realización de experiencias de control no lineal

  • Lampón Diestre, Cristina
  • Costa-Castelló, R.
  • Dormido-Canto, Sebastián
[Resumen] En este trabajo se presenta un modelo analógico que puede ser utilizado para la realización de prácticas experimentales de control no lineal. El módulo permite incorporar no linealidades estáticas a sistemas ya existentes. El trabajo presenta la estructura, los componentes y un ejemplo de uso de este dispositivo., Este trabajo ha sido parcialmente financiado por los proyectos DPI2012-31303 y DPI2015-69286-C3-2-R (MINECO/FEDER) a y el proyecto 2014 SGR 267 de la AGAUR (agencia de la Generalitat de Catalunya), Generalitat de Catalunya; 2014 SGR 267, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Robótica móvil para el aprendizaje de conceptos de programación en tiempo real

  • Rodríguez, Carlos
  • Guzmán, J.L.
  • Berenguel, Manuel
  • Moreno, José Carlos
  • Rodríguez, Francisco
  • Dormido-Canto, Sebastián
[Resumen] La enseñanza de asignaturas de programación en tiempo real puede resultar una difícil tarea debido a los múltiples conceptos teóricos que contiene. Este trabajo se centra en el uso de robots móviles tipo Lego Mindstorms NXT para la enseñanza de programación en tiempo real a estudiantes de grado. Como caso de estudio para mostrar la metodología de trabajo, se muestra el problema de control de estabilidad en tiempo real de un robot autobalanceado regulado mediante un controlador PI desarrollado en el lenguaje de programación Ada. En general, se obtuvieron críticas muy positivas en el cuestionario presentado a los estudiantes., Este trabajo ha sido parcialmente financiado por los siguientes proyectos: DPI2014-55932-C2-1-R y DPI2014-56364-C2-1-R del Ministerio de Ciencia e Innovación y fondos FEDER, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Harry Potter and the Action Prediction Challenge from Natural Language

  • Vilares, David
  • Gómez-Rodríguez, Carlos
The 17th Annual Conference of the North American Chapter of the Association for Computational Linguistics: Human Language Technologies (NAACL-HLT 2019) was held in Minneapolis from June 2nd to June 7th, 2019., [Absctract]: We explore the challenge of action prediction from textual descriptions of scenes, a testbed to approximate whether text inference can be used to predict upcoming actions. As a case of study, we consider the world of the Harry Potter fantasy novels and inferring what spell will be cast next given a fragment of a story. Spells act as keywords that abstract actions (e.g. ‘Alohomora’ to open a door) and denote a response to the environment. This idea is used to automatically build HPAC, a corpus containing 82,836 samples and 85 actions. We then evaluate different baselines. Among the tested models, an LSTM-based approach obtains the best performance for frequent actions and large scene descriptions, but approaches such as logistic regression behave well on infrequent actions., This work has received support from the TELEPARES-UDC project (FFI2014-51978-C2- 2-R) and the ANSWER-ASAP project (TIN2017- 85160-C2-1-R) from MINECO, and from Xunta de Galicia (ED431B 2017/01), and from the European Research Council (ERC), under the European Union’s Horizon 2020 research and innovation programme (FASTPARSE, grant agreement No 714150), Xunta de Galicia; ED431B 2017/01
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Diseño de un motor de tareas para terapias de neurorehabilitación asistidas por robots

  • Lledó Pérez, Luis Daniel
  • Ezquerro, Santiago
  • Bertomeu-Motos, Arturo
  • Catalán Orts, José María
  • Ñeco, Ramón
  • Sabater-Navarro, J. M.
  • García-Aracil, Nicolás
[Resumen] Este artículo presenta el proceso de planteamiento, análisis, diseño e implementación de un motor de tareas diseñado para facilitar la generación de actividades virtuales destinadas a terapias de neuro-rehabilitación de personas que han sufrido un accidente cerebrovascular, asistidos por dispositivos robóticos. Todo el desarrollo del sistema ha seguido la metodología RUP de diseño de software, utilizando herramientas de libre distribución. Por consiguiente, este un método genera tareas virtuales de manera rápida con costes mínimos. Por último, se han implementado tres ejemplos de tareas para comprobar el correcto funcionamiento de los componentes diseñados., Este trabajo ha sido financiado por la Comisión Europea a través del proyecto HomeRehab: Echord++ (GA 601116) y por el Ministerio de Economía y Competitividad a través del proyecto DPI2015-70415-C2-2-R, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Can data placement be effective for Neural Networks classification tasks? Introducing the Orthogonal Loss

  • Cancela, Brais
  • Bolón-Canedo, Verónica
  • Alonso-Betanzos, Amparo
Presented at: 5th International Conference on Pattern Recognition, ICPR 2020V, Virtual, Milan, 10-15 January 2021, This version of the paper has been accepted for publication. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The final published paper is available online at: https://doi.org/10.1109/ICPR48806.2021.9412704, [Abstract]: Traditionally, a Neural Network classification training loss function follows the same principle: minimizing the distance between samples that belong to the same class, while maximizing the distance to the other classes. There are no restrictions on the spatial placement of deep features (last layer input). This paper addresses this issue when dealing with Neural Networks, providing a set of loss functions that are able to train a classifier by forcing the deep features to be projected over a predefined orthogonal basis. Experimental results shows that these `data placement' functions can overcome the training accuracy provided by the classic cross-entropy loss function., This research has been financially supported in part by European Union ERDF funds, by the Spanish Ministerio de Economía y Competitividad (research projects TIN2015-65069-C2 and PID2019-109238GB-C22), and by the Xunta de Galicia (research projects GRC2014/035 and ED431G/01). We also gratefully acknowledge the support of NVIDIA Corporation with the donation of the Titan Xp GPU used for this research. Brais Cancela acknowledges the support of the Xunta de Galicia under its postdoctoral program., Xunta de Galicia; GRC2014/035, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Control predictivo basado en datos

  • Simón Gómez, Vicente
  • Muñoz de la Peña Sequedo, David
  • Álamo Cantarero, Teodoro
[Resumen] En esta comunicación se presenta la implementación de un controlador predictivo basado en datos (DbPC) que permite resolver el problema de regulación de cualquier estado objetivo sobre un sistema cuyo modelo es desconocido. A diferencia de otras estrategias de control, ésta no usa un modelo, sino una base de datos para abordar el problema de regulación. En esta base de datos se almacena un histórico de las trayectorias llevadas a cabo por el sistema estudiado. Por último, el DbPC se implementa sobre un sistema real y con modelo conocido para un análisis y validación de los resultados obtenidos que se comparan con las diferentes estrategias de control que se han utilizado para generar la base de datos de este ejemplo., Trabajo financiado por el Ministerio de Economía y Competitividad a través del proyecto Estimación y Optimización Dinámica de la Eficiencia en Infraestructuras Críticas (DPI2013-48243-C2-2-R), https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Transcranial Direct Current Stimulatio (tDCS) and Transcranial Current Alterning Stimulation (tACS) Review

  • Rodríguez-Ugarte, Marisol
  • Sciacca, Nadia
  • Azorín, José M.
[Abstract] This literature review is aimed to explore the main technical characteristics of both transcranial direct current stimulation (tDCS) and transcranial alternate current stimulation (tACS) using the latest research on both healthy and impaired subjects. These techniques have no official standards developed yet. Our intent is to underline the main properties and problems linked with the application of those techniques which show diverse, and sometimes even opposite, results depending mainly on electrode positioning and underlying brain activity., This research has been carried out in the framework of the project Associate - Decoding and stimulation of motor and sensory brain activity to support long term potentiation through Hebbian and paired associative stimulation during rehabilitation of gait (DPI2014-58431-C4-2-R), funded by the Spanish Ministry of Economy and Competitiveness and by the European Union through the European Regional Development Fund (ERDF) A way to build Europe, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Detecting Perspectives in Political Debates

  • Vilares, David
  • He, Yulan
[Abstract]: We explore how to detect people’s perspectives that occupy a certain proposition. We propose a Bayesian modelling approach where topics (or propositions) and their associated perspectives (or viewpoints) are modeled as latent variables. Words associated with topics or perspectives follow different generative routes. Based on the extracted perspectives, we can extract the top associated sentences from text to generate a succinct summary which allows a quick glimpse of the main viewpoints in a document. The model is evaluated on debates from the House of Commons of the UK Parliament, revealing perspectives from the debates without the use of labelled data and obtaining better results than previous related solutions under a variety of evaluations., We thank Charles Marshall for crawling the HCD data. DV was funded by MECD (FPU 13/01180), MINECO (FFI2014-51978-C2-2-R) and Inditex-UDC grants for research stays. YH is partly funded by the Natural Science Foundation of China (61528302)., China. Natural Science Foundation of China; 61528302
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Estudio comparativo de efectos tDCS y rehabilitación combinado con rehabilitación con dispositivo robótico

  • Ezquerro, Santiago
  • Delegido, Irene
  • Bertomeu-Motos, Arturo
  • Lledó Pérez, Luis Daniel
  • Puerto, Rafael
  • Sabater-Navarro, J. M.
  • García-Aracil, Nicolás
[Resumen] El Accidente Cerebrovascular (ACV), representa uno de los principales problemas en la salud pública en todo el mundo. Una nueva herramienta empleada en rehabilitación es la estimulación transcraneal por corriente directa (tDCS) no invasiva. Se trata de técnica segura, ya que no se realiza ningún tipo de punción o perforación sobre el paciente. Esta técnica modula la excitabilidad o inhibición neuronal en áreas corticales específicas. En este estudio han participado 2 pacientes con ACV y sintomatología espástica e hipotónica (1:1) que recibieron un total de 10 sesiones de estimulación tDCS y terapia con dispositivo robótico. Se emplearon evaluaciones funcionales al inicio y final del tratamiento tales como, valoración del Índice Motor, escala STREAM y valoración Frenchay, además se registraron datos electromiográficos durante todas las sesiones. Tras la realización del tratamiento se analizaron todos los datos obtenidos tanto en las valoraciones funcionales como en las señales registradas obteniendo resultados positivos en referencia al control motor voluntario, disminuyendo o aumentando el tono muscular con el que partían de inicio los pacientes. Concluyendo este estudio en que la estimulación tDCS puede emplearse como una herramienta más al alcance del personal rehabilitador, la cual, puede combinarse con terapias alternativas como las generadas por un dispositivo robótico., Esta investigación ha sido financiada por el Ministerio de Economía y Competitividad a través del proyecto DPI2015-70415-C2-2-R, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Left-to-Right Dependency Parsing with Pointer Networks

  • Fernández-González, Daniel
  • Gómez-Rodríguez, Carlos
Proceedings of the 2019 Conference of the North American Chapter of the Association for Computational Linguistics: Human Language Technologies, Volume 1 (Long and Short Papers), [Abstract]: We propose a novel transition-based algorithm that straightforwardly parses sentences from left to right by building n attachments, with n being the length of the input sentence. Similarly to the recent stack-pointer parser by Ma et al. (2018), we use the pointer network framework that, given a word, can directly point to a position from the sentence. However, our left-to-right approach is simpler than the original top-down stack-pointer parser (not requiring a stack) and reduces transition sequence length in half, from 2n-1 actions to n. This results in a quadratic non-projective parser that runs twice as fast as the original while achieving the best accuracy to date on the English PTB dataset (96.04% UAS, 94.43% LAS) among fully-supervised single-model dependency parsers, and improves over the former top-down transition system in the majority of languages tested., This work has received funding from the European Research Council (ERC), under the European Union’s Horizon 2020 research and innovation programme (FASTPARSE, grant agreement No 714150), from MINECO (FFI2014-51978-C2-2-R, TIN2017-85160-C2-1-R) and from Xunta de Galicia (ED431B 2017/01)., Xunta de Galicia; ED431B 2017/01
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

MPC como estrategia de gestión energética para un vehículo híbrido eléctrico

  • Carignano, Mauro Guido
  • Feroldi, Diego
  • Nigro, Norberto
  • Costa-Castelló, R.
[Resumen] En este trabajo se presenta la formulación y aplicación de una estrategia de gestión energética (EMS) para un vehículo eléctrico (HEV) basada en Control Predictivo (MPC). Específicamente, se presenta una formulación no lineal variante en el tiempo. El problema de optimización en el horizonte de predicción se resuelve utilizando programación dinámica. Los resultados obtenidos son comparados con las estrategias de gestión más reconocidas en la literatura, incluyendo la solución óptima. Los resultados en términos del consumo de combustible y del uso de la batería no muestran ninguna ventaja con implementación de MPC., Este trabajo ha sido parcialmente financiado por los proyectos DPI2015-69286-C3-2-R (MINECO/FEDER) y el proyecto 2014 SGR 267 de la AGAUR (Agencia de la Generalitat de Catalunya), Generalitat de Catalunya; 2014-SGR-267, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Selection of the Adequate Algorithm to Generate Plant Templates for Robust Control

  • Díaz, José Manuel
  • Dormido-Canto, Sebastián
  • Aranda, Joaquín
  • Muñoz-Mansilla, Rocío
[Resumen] The calculation of templates associated with plant uncertainty is one of the first steps in some control robust methodologies. This paper presents a comparative study of three classic algorithms proposed in the late 1980s and early 1990s for calculating plant templates. The results of this study can help the designer to choose the right template computation algorithm depending on the kind of plant., This research was supported by the Spanish CICYT under grants DPI2012-31303 and DPI2013-46665-C2-2-R, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Viable Dependency Parsing as Sequence Labeling

  • Strzyz, Michalina
  • Vilares, David
  • Gómez-Rodríguez, Carlos
[Abstract]: We recast dependency parsing as a sequence labeling problem, exploring several encodings of dependency trees as labels. While dependency parsing by means of sequence labeling had been attempted in existing work, results suggested that the technique was impractical. We show instead that with a conventional BILSTM-based model it is possible to obtain fast and accurate parsers. These parsers are conceptually simple, not needing traditional parsing algorithms or auxiliary structures. However, experiments on the PTB and a sample of UD treebanks show that they provide a good speed-accuracy tradeoff, with results competitive with more complex approaches., This work has received funding from the European Research Council (ERC), under the European Union’s Horizon 2020 research and innovation programme (FASTPARSE, grant agreement No 714150), from the TELEPARESUDC project (FFI2014-51978-C2-2-R) and the ANSWER-ASAP project (TIN2017-85160-C2-1-R) from MINECO, and from Xunta de Galicia (ED431B 2017/01). We gratefully acknowledge NVIDIA Corporation for the donation of a GTX Titan X GPU., Xunta de Galicia; ED431B 2017/01
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Seguimiento y análisis automático de contenidos en redes sociales

  • Alonso, Miguel A.
  • Gómez-Rodríguez, Carlos
  • Vilares, David
  • Doval, Yerai
  • Vilares, Jesús
[Abstract]: La Minería de Opiniones es la disciplina que aborda el tratamiento automático de las opiniones contenidas en un texto. Permite, por ejemplo, determinar si en un texto se está opinando o no, o si la polaridad o sentimiento que se expresa en el mismo es positiva, negativa o mixta. También permite la extracción automática de características, lo que posibilita conocer la percepción que los autores tienen sobre aspectos concretos de un tema determinado. Este trabajo, tras realizar una introducción a dicho ámbito, presenta una aproximación propia al mismo, la cual destaca por emplear información sintáctica, así como por estar especialmente adaptada a uno de los contextos de trabajo más complicados, Twitter. Dicha tecnología es fácilmente aplicable a tareas de inteligencia., Investigación financiada por Ministerio de Economía y Competitividad (FFI2014-51978-C2-2-R), Xunta de Galicia (R2014/034) y Ministerio de Educación, Cultura y Deporte (FPU13/01180)., Xunta de Galicia; R2014/034
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Network Data Flow Clustering based on Unsupervised Learning

  • López-Vizcaíno, Manuel F.
  • Dafonte, Carlos
  • Nóvoa, Francisco
  • Garabato, D.
  • Álvarez, M. A.
  • Fernández, Diego
[Abstract]: Network communication data analysis is crucial in order to provide an adequate security level in computer infrastructures. As the volume of data and the number of features rise, the difficulties associated with its study also increase. A possible approach to this problem based on Artificial Intelligence techniques is to perform clustering, creating groups of similar characteristics. Self-Organized Maps are an artificial neural networks which perform dimensionality reduction as well as clustering over numerical data. In this paper, we propose a mixed numerical-categorical version of Self-Organized Maps algorithm applied to network communication data. Moreover a study of its enhancement with the inclusion of time dependent features is performed. The technique is tested with a well known dataset for Intrusion Detection Systems and it provides a technique to create different clusters or groups of different types of traffic by means of network information., Part of this work was supported by the Xunta de Galicia (ED431B 2018/42), the European Regional Development Fund-ERDF) and Spanish MECD FPU16/03827; we also used IT infrastructure that was acquired through the RTI2018-095076-B-C22 and ESP2016-80079-C2-2-R projects, financed by the Spanish MICINN and MINECO Ministries., Xunta de Galicia; ED431B 2018/42
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Evaluación de un sistema de radio UWB para posicionamiento preciso de vehículos

  • Jiménez, Antonio R.
  • Godoy, Jorge
  • Seco, Fernando
[Resumen] En este trabajo presentamos la evaluación de un equipo de balizas de radio Ultra-Wide-Band (UWB) como sistema complementario de posicionamiento de vehículos en entornos con pobre cobertura GPS. La evaluación del sistema UWB usa como referencia verdadera un sistema RTK-GPS con precisión centimétrica. Las pruebas realizadas en las pistas del CAR muestran que el sistema UWB permite realizar mediciones de rango hasta 90 metros de distancia con precisión submétrica en la mayoría de las medidas y con la aparici on de pocos outliers. Colocando 6 nodos UWB en el entorno y dos nodos en el techo de un coche, y utilizando un filtro de Kalman extendido, es posible localizar en 2D y en orientación con buena precisión (0.8 m y 10 grados, respectivamente en el 90% de los casos). El estudio marca las bases para una posible utilización de UWB en otros entornos (subterráneos o parkings) y en labores de cooperación entre vehículos (platooning)., Los autores quieren agradecer la ayuda financiera recibida de los proyectos LORIS (TIN2012-38080-C04-04), TARSIUS (TIN2015-71564-C4-2-R (MINECO/FEDER)), TCAP-AUTO (RTC-2015-3942-4 (MINECO/FEDER)) y NAVEGASE (DPI2014-53525-C3-3-R (MINECO)), https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

A Transition-Based Algorithm for Unrestricted AMR Parsing

  • Vilares, David
  • Gómez-Rodríguez, Carlos
The Conference was held in New Orleans, June 1 to June 6, 2018 at the Hyatt Regency New Orleans hotel., [Absctract]: Non-projective parsing can be useful to handle cycles and reentrancy in AMR graphs. We explore this idea and introduce a greedy left-to-right non-projective transition-based parser. At each parsing configuration, an oracle decides whether to create a concept or whether to connect a pair of existing concepts. The algorithm handles reentrancy and arbitrary cycles natively, i.e. within the transition system itself. The model is evaluated on the LDC2015E86 corpus, obtaining results close to the state of the art, including a Smatch of 64%, and showing good behavior on reentrant edges., This work is funded from the European Research Council (ERC), under the European Union’s Horizon 2020 research and innovation programme (FASTPARSE, grant agreement No 714150), from the TELEPARES-UDC project (FFI2014- 51978-C2-2-R) and the ANSWER-ASAP project (TIN2017-85160-C2-1-R) from MINECO, and from Xunta de Galicia (ED431B 2017/01). We gratefully acknowledge NVIDIA Corporation for the donation of a GTX Titan X GPU., Xunta de Galicia; ED431B 2017/01
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Control PID basado en eventos periódico para sistemas de control de red

  • Aranda-Escolástico, Ernesto
  • Rodríguez, Carlos
  • Guinaldo, María
  • Guzmán, J.L.
  • Dormido-Canto, Sebastián
[Resumen] Este trabajo trata el control basado en eventos en sistemas en red. Se establece un formalismo de control basado en eventos periódico con controladores lineales como el PID a partir del teorema de Lyapunov-Krasovskii para sistemas muestreados. El formalismo permite garantizar la estabilidad asintótica del sistema dado un retardo máximo en la red. Para verificar la efectividad del sistema se ha utilizado el modelo de un reactor inestable con un controlador PI y se ha comparado con un esquema de control periódico., Este trabajo ha sido financiado en parte por el Plan Promoción de la Investigación de la UNED bajo el proyecto 2014-007-UNED-PROY y por el Ministerio de Economía y Competitividad de España bajo los proyectos DPI2012-31303, DPI2014-55932-C2-1-R y DPI2014-55932-C2-2-R, Universidad Nacional de Educación a Distancia; 2014-007-UNED-PROY, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo de un entorno colaborativo para aplicaciones de fusión

  • Chacón, Jesús
  • Fábregas, Ernesto
  • Dormido-Canto, Sebastián
  • Vega, Jesús
  • Sánchez, José
[Resumen] El entorno colaborativo desarrollado permite realizar un envío de tareas a ser procesadas en clusters de supercomputación, sin necesidad de que los usuarios de las mismas deban conocer la infraestructura subyacente o estar familirizados con las órdenes de más bajo nivel necesarias para interactuar con estos sistemas., Este trabajo ha sido parcialmente financiado por el Ministerio de Economía y Competitividad, dentro de los proyectos ENE2015-64914-C3-2-R, ENE2015-64914-C3-1-R, ENE2012-38970-C04-03 y DPI2014-55932-C2-2-R, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Reconocimiento de actividades en el desplazamiento por interiores mediante un teléfono inteligente y señales de oportunidad

  • Seco, Fernando
  • Jiménez, Antonio R.
[Resumen] En este trabajo se estudia cómo las señales de oportunidad pueden ser utilizadas no sólo para mejorar la precisión del posicionamiento en interiores, sino también para obtener información valiosa de las actividades que está realizando el usuario. Las señales de oportunidad son aquellas no diseñadas específicamente para posicionamiento, pero presentes de forma natural en muchos entornos, y que pueden ser captadas, por ejemplo, a través de los sensores con los que cuenta cualquier teléfono móvil actual. Se introducen diferentes posibilidades de las señales de oportunidad, dentro de un marco de estimación de la posición bayesiano, y se ilustra su utilidad mediante trayectorias reales realizadas en un edificio de gran tamaño., Este trabajo ha sido financiado por los proyectos LORIS (MINECO ref. TIN2012-38080-C04) y TARSIUS (MINECO/FEDER ref. TIN2015-71564-C4-2-R), https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Una estrategia de control mediante observadores para la temperatura en edificio de oficinas

  • Mascaró Palliser, Rubén
  • Costa-Castelló, R.
  • Álvarez, José Domingo
[Resumen] En este trabajo se presenta un modelo térmico de una habitación basado en primeros principios junto con el modelo térmico de las paredes que la conforman. Ambos modelos permiten formular el modelo parametrizable de un edificio con independencia del número de habitaciones que tenga. Además, se presentan resultados utilizando el modelo de un sistema de control basado en realimentación de estados que ha sido diseñado tomando como referencia las técnicas de control LQR. El sistema de control utiliza un observador basado en un filtro de Kalman que permita estimar la temperatura de todas las paredes del edificio, de esta manera, una futura implementación del sistema de control en un edificio real permitiría un ahorro considerable en lo tocante a la red de sensores que éste necesitaría para su funcionamiento., Este trabajado ha sido parcialmente financiado con las becas de colaboración del MEC, los proyectos DPI2015-69286-C3-2-R, DPI2014-56364-C2-1-R (MINECO/FEDER) y el proyecto 2014 SGR 267 de la AGAUR (agencia de la Generalitat de Catalunya). José Domingo Álvarez Hervás pertenece al programa del MEC `Ramón y Cajal' cofinanciado por la fundación social Europea, Generalitat de Catalunya; 2014-SGR-267, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

A delayed elastic-net approach for performing adversarial attacks

  • Cancela, Brais
  • Bolón-Canedo, Verónica
  • Alonso-Betanzos, Amparo
Presented at: 5th International Conference on Pattern Recognition, ICPR 2020, Virtual, Milan, 10-15 January 2021, This version of the paper has been accepted for publication. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. The final published paper is available online at: https://doi.org/10.1109/ICPR48806.2021.9413170, [Abstract]: With the rise of the so-called Adversarial Attacks, there is an increased concern on model security. In this paper we present two different contributions: novel measures of robustness (based on adversarial attacks) and a novel adversarial attack. The key idea behind these metrics is to obtain a measure that could compare different architectures, with independence of how the input is preprocessed (robustness against different input sizes and value ranges). To do so, a novel adversarial attack is presented, performing a delayed elastic-net adversarial attack (constraints are only used whenever a successful adversarial attack is obtained). Experimental results show that our approach obtains state-of-the-art adversarial samples, in terms of minimal perturbation distance. Finally, a benchmark of ImageNet pretrained models is used to conduct experiments aiming to shed some light about which model should be selected whenever security is a role factor., This research has been financially supported in part by European Union ERDF funds, by the Spanish Ministerio de Economía y Competitividad (research project TIN2015-65069-C2), and by the Xunta de Galicia (research projects GRC2014/035 and ED431G/01). We also gratefully acknowledge the support of NVIDIA Corporation with the donation of the Titan Xp GPU used for this research. Brais Cancela acknowledges the support of the Xunta de Galicia under its postdoctoral program., Xunta de Galicia; GRC2014/035, Xunta de Galicia; ED431G/01
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Prácticas experimentales de control digital con elementos de bajo coste

  • Izquierdo Borràs, Adolf
  • Costa-Castelló, R.
[Resumen] En este trabajo se presenta un entorno de bajo coste, compuesto por una placa Arduino y un circuito analógico, para su uso en prácticas de control digital. Se describe el entorno completo (tanto software como hardware), unas prácticas propuestos y se muestran algunos resultados experimentales., Este trabajo ha sido parcialmente financiado por el proyecto DPI2015-69286-C3-2-R (MINECO/FEDER) y el proyecto 2014 SGR 267 de la AGAUR (agencia de la Generalitat de Catalunya), Generalitat de Catalunya; 2014-SGR-267, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Mining of the Milky Way Star Archive Gaia-DR2: Searching for Binary Stars in Planetary Nebulae

  • González Santamaría, I.
  • Manteiga, Minia
  • Dafonte, Carlos
  • Manchado, Arturo
  • Ulla, Ana
This article belongs to the Proceedings of 3rd XoveTIC Conference, [Abstract] The aim of this work is to search for binary stars associated to planetary nebulae (ionized stellar envelopes in expansion), by mining the astronomical archive of Gaia DR2, that is composed by around 1.7 billion stellar sources. For this task, we selected those objects with coincident astrometric parameters (parallaxes and proper motions) with the corresponding central star, among a sample of 211 planetary nebulae. By this method, we found eight binary systems, and we obtained their components positions, separations, temperatures and luminosities, as well as some of their masses and ages. In addition, we estimated the probability for each companion star of having been detected by chance and we analyzed how the number of false matches increase as the separation distance between both stars gets larger. All these procedures have been carried out making use of data mining techniques., Funding from Spanish Ministry projects ESP2016-80079-C2-2-R, RTI2018-095076-BC22, Xunta de Galicia ED431B 2018/42, and AYA-2017-88254-P is acknowledged by the authors. M.M. thanks the Instituto de Astrofísica de Canarias for a visiting stay funded by the Severo Ochoa Excellence programme. IGS acknowledges financial support from the Spanish National Programme for the Promotion of Talent and its Employability grant BES-2017-083126 cofunded by the European Social Fund, Xunta de Galicia; ED431B 2018/42
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Sistema robótico multimodal de miembro superior para interacción con entornos físicos

  • Díez Pomares, Jorge
  • Blanco Ivorra, Andrea
  • Lledó Pérez, Luis Daniel
  • Catalán Orts, José María
  • Badesa, Francisco Javier
  • García-Aracil, Nicolás
[Resumen] Este artículo describe el diseño de un sistema robótico multimodal enfocado a proporcionar a personas con movilidad reducida, la capacidades de interaccionar con objetos reales. Con este sistema se pretende cubrir todo el proceso de interacción, desde la selección del objeto con el que se quiere interactuar, pasando por alcanzar y agarrarlo, hasta volver a dejar el objeto. El sistema se compone de un robot diseñado para rehabilitación de miembro superior, de un exoesqueleto de mano, un sistema de seguimiento de mirada, un dispositivo de seguimiento de objetos, y un sistema de detección de intención de movimiento. Con este propósito, en este artículo se presenta la arquitectura del sistema, especificando los elementos particulares que serán utilizados en un escenario experimental para comprobar la viabilidad del sistema., Este trabajo ha sido financiado por la Comisión Europea (ICT-22-2014: Multimodal and Natural computer interaction) a través del proyecto AIDE: ”Adaptive Multimodal Interfaces to Assist Disabled People in Daily Activities” (Grant agreement no: 645322); y por el Ministerio de Economía y Competitividad a través del proyecto DPI2015-70415-C2-2-R, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

HEAD-QA: A Healthcare Dataset for Complex Reasoning

  • Vilares, David
  • Gómez-Rodríguez, Carlos
Took place in Florence (Italy) at the 'Fortezza da Basso' from July 28th to August 2nd, 2019., [Absctract]: We present HEAD-QA, a multi-choice question answering testbed to encourage research on complex reasoning. The questions come from exams to access a specialized position in the Spanish healthcare system, and are challenging even for highly specialized humans. We then consider monolingual (Spanish) and cross-lingual (to English) experiments with information retrieval and neural techniques. We show that: (i) HEAD-QA challenges current methods, and (ii) the results lag well behind human performance, demonstrating its usefulness as a benchmark for future work., This work has received support from the TELEPARES-UDC project (FFI2014-51978-C2- 2-R) and the ANSWER-ASAP project (TIN2017- 85160-C2-1-R) from MINECO, from Xunta de Galicia (ED431B 2017/01), and from the European Research Council (ERC), under the European Union’s Horizon 2020 research and innovation programme (FASTPARSE, grant agreement No 714150). We thank Mark Anderson for his help with translation fluency evaluation., Xunta de Galicia; ED431B 2017/01
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Librería Java para análisis y simulación de sistemas lineales

  • Blanch Costa, Jordi
  • Costa-Castelló, R.
[Resumen] Este proyecto presenta el diseño, implementación y algunos ejemplos de uso de una librería JAVA pensada para el análisis y simulación de sistemas lineales. Se ha diseñado pensando en que sea fácilmente integrable con Easy Java Simulations. El uso combinado de ambas herramientas facilita el desarrollo de laboratorios virtuales y remotos., Este trabajo ha sido parcialmente financiado por el proyecto DPI2015-69286-C3-2-R (MINECO/FEDER) y el proyecto 2014 SGR 267 de la AGAUR (agencia de la Generalitat de Catalunya), Generalitat de Catalunya; 2014 SGR 267, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Better, Faster, Stronger Sequence Tagging Constituent Parsers

  • Vilares, David
  • Abdou, Mostafa
  • Søgaard, Anders
NAACL-HLT 2019 was held at the Hyatt Regency in Minneapolis from June 2nd through 7th, 2019., [Absctract]: Sequence tagging models for constituent parsing are faster, but less accurate than other types of parsers. In this work, we address the following weaknesses of such constituent parsers: (a) high error rates around closing brackets of long constituents, (b) large label sets, leading to sparsity, and (c) error propagation arising from greedy decoding. To effectively close brackets, we train a model that learns to switch between tagging schemes. To reduce sparsity, we decompose the label set and use multi-task learning to jointly learn to predict sublabels. Finally, we mitigate issues from greedy decoding through auxiliary losses and sentence-level fine-tuning with policy gradient. Combining these techniques, we clearly surpass the performance of sequence tagging constituent parsers on the English and Chinese Penn Treebanks, and reduce their parsing time even further. On the SPMRL datasets, we observe even greater improvements across the board, including a new state of the art on Basque, Hebrew, Polish and Swedish., DV has received support from the European Research Council (ERC), under the European Union’s Horizon 2020 research and innovation programme (FASTPARSE, grant agreement No 714150), from the TELEPARES-UDC project (FFI2014-51978-C2-2-R) and the ANSWERASAP project (TIN2017-85160-C2-1-R) from MINECO, and from Xunta de Galicia (ED431B 2017/01). MA and AS are funded by a Google Focused Research Award., Xunta de Galicia; ED431B 2017/01
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Control de formaciones de vehículos marinos de superficie con restricciones de entrada

  • Cruz García, Jesús Manuel de la
  • López-Orozco, José Antonio
  • Besada Portas, Eva
  • Aranda, Joaquín
[Resumen] Se presenta un algoritmo para el control de formaciones y seguimiento de caminos para vehículos no holónomos con aplicación a vehículos marinos de superficie. El algoritmo sigue una estructura líder-seguidor y es una extensión de un artículo anterior [1] a curvas parametrizadas, y no sólo para caminos formados por tramos rectos y circulares. Además, se tiene en cuenta las restricciones que restringen las posibles trayectorias que pueden ser seguidos por el líder. El algoritmo sigue manteniendo la ventaja de la sencillez y sólo necesita de la sintonía de un parámetro para cada uno de los vehículos. Se muestran experimentos simulados con modelos reales a escala que validan el método propuesto., Este trabajo ha sidofinanciado por los proyectos DPI2013-46665-C2-R1 y DPI2013-46665-C2-R2, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Arquitectura de control multimodal para robótica asistencial

  • Catalán Orts, José María
  • Díez Pomares, Jorge
  • Bertomeu-Motos, Arturo
  • Badesa, Francisco Javier
  • Puerto, Rafael
  • Sabater-Navarro, J. M.
  • García-Aracil, Nicolás
[Resumen] Este documento presenta una arquitectura de control multimodal para robótica de asistencia, la cual trata de tener en cuenta las decisiones del usuario para mejorar en el desempeño de las tareas al mismo tiempo que se implementa un método para minimizar posibles errores en el manejo del robot mediante un control visual. A través de la información proporcionada por el sistema de eyetracking, el usuario será capaz de interactuar con el sistema para seleccionar el objeto deseado, indicar la intención de cogerlo o incluso abortar la ejecución. El sistema incorpora un sistema de tracking 3D para conocer la ubicación de los objetos con respecto al manipulador robótico. Este sistema nos sirve tanto para definir la posición que debe alcanzar el robot, como para corregir las posibles desviaciones durante la ejecución de la trayectoria., Este trabajo ha sido financiado por la Comisión Europea a través del proyecto AIDE: Adaptive Multimodal Interfaces to AssistDisabled People in Daily Activities (Grant agreementno: 645322) y por el Ministerio de Economía y Competitividad a través del proyecto DPI2015-70415-C2-2-R, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Un nuevo modelo para la conexión remota con hardware usando Javascript

  • Sáenz, Jacobo
  • Esquembre Martínez, Francisco
  • García, Félix
  • Torre, Luis de la
  • Sánchez, José
  • Dormido-Canto, Sebastián
[Resumen] En la actualidad los recursos accesibles a través de la web juegan un papel importante en la educación y el aprendizaje, gracias en parte a los avances tecnológicos de los últimos a Esta importancia es incluso mayor en áreas científicas y de ingeniería, principalmente en aquellas universidades a distancia, donde los laboratorios presenciales clásicos no son siempre posibles. Por esta razón, las prácticas presenciales de laboratorio han sido sustituidas o en ocasiones complementadas por laboratorios remotos y virtuales (LVR). Comúnmente, las aplicaciones a través de las cuales pueden llevarse a cabo estas prácticas han sido desarrolladas utilizando herramientas de alto nivel o entornos de desarrollo que utilizan en menos o mayor medida Java. Desafortunadamente, la diseminación de este tipo de aplicaciones se ha visto frenada durante los últimos años, debido a los nuevos problemas de seguridad relacionados con Java. Pero el avance en nuevas tecnologías también implica nuevos problemas, si tenemos en cuenta el creciente uso de dispositivos móviles y su imposibilidad para ejecutar aplicaciones Java. Este trabajo es un primer paso para obtener una nueva estructura de la herramienta Easy Java/Javascript Simulations (EjsS) para la conexión remota de dispositivos hardware utilizando Javascript. Para conseguir este objetivo, el primer paso es la solución de los problemas con las aplicaciones Java al utilizar EjsS. La solución propuesta ofrece una nueva arquitectura para reutilizar sus LVR usando un modelo, que se ejecutará en un servidor, y una interfaz gráfica de usuario que utiliza Javascript, funcionando en lado del cliente., Este trabajo ha sido financiado en parte por el Ministerio de Economía y Competitividad bajo el proyecto DPI2014-55932-C2-2-R, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Control adaptativo por modelo de referencia para un inversor basado en LCL con síntesis de controlador mínima

  • Larco Barros, Ciro
  • Costa-Castelló, R.
  • Olm, Josep M.
[Resumen] Un Control Adaptativo por Modelo de Referencia (MRAC) con Síntesis de Controlador Mínima (MCS), es desarrollado con el objetivo de controlar un Inversor monofásico basado en un Filtro LCL conectado a la Red Eléctrica y adaptar el inductor de la red, que es un parámetro desconocido y que genera incertidumbre, manteniendo las prestaciones y la robustez del sistema. Para ello primero se revisara el algoritmo de MCS y en función de este, se muestran todos los pasos a seguir y el desarrollo de los componentes necesarios para el funcionamiento de MCS en tiempo continuo. Se desarrolla un modelo de simulación promediado y se presentan los resultados obtenidos., Este trabajo ha sido realizado gracias al apoyo de la Secretaría Nacional de Educación Superior, Ciencia y Tecnología e Innovación del Ecuador (SENESCYT), a la Universidad de Cuenca, y a los proyectos DPI2013-41224-P y DPI2015-69286-C3-2-R (MINECO/FEDER) y 2014 SGR 267 de la agencia AGAUR de la Generalitat de Catalunya, Generalitat de Catalunya; 2014 SGR 267, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Constituent Parsing as Sequence Labeling

  • Gómez-Rodríguez, Carlos
  • Vilares, David
EMNLP 2018, Square Meeting Center, Brussels. From October 31st through November 4th., [Absctract]: We introduce a method to reduce constituent parsing to sequence labeling. For each word wt, it generates a label that encodes: (1) the number of ancestors in the tree that the words wt and wt+1 have in common, and (2) the nonterminal symbol at the lowest common ancestor. We first prove that the proposed encoding function is injective for any tree without unary branches. In practice, the approach is made extensible to all constituency trees by collapsing unary branches. We then use the PTB and CTB treebanks as testbeds and propose a set of fast baselines. We achieve 90% F-score on the PTB test set, outperforming the Vinyals et al. (2015) sequence-to-sequence parser. In addition, sacrificing some accuracy, our approach achieves the fastest constituent parsing speeds reported to date on PTB by a wide margin., This work has received funding from the European Research Council (ERC), under the European Union’s Horizon 2020 research and innovation programme (FASTPARSE, grant agreement No 714150), from the TELEPARESUDC project (FFI2014-51978-C2-2-R) and the ANSWER-ASAP project (TIN2017-85160-C2-1-R) from MINECO, and from Xunta de Galicia (ED431B 2017/01). We gratefully acknowledge NVIDIA Corporation for the donation of a GTX Titan X GPU., Xunta de Galicia; ED431B 2017/01
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

R software code to process and extract information from 3D Lidar point clouds

  • Llorens Calveras, Jordi
  • Cabrera Pérez, Carlos
  • Escolà i Agustí, Alexandre
  • Arnó Satorra, Jaume
Poster Proceedings of the 12th European Conference on Precision Agriculture, July 8-11, Montpellier, France. pp. 114-115. e-book publication. SupAgro Montpellier. ISBN 978-2-900792-49-0, In the process of electronic canopy characterization, it is necessary to process efficiently point clouds obtained by means of sensors or other capturing information systems. These point clouds may have different origin but they define the main structural characteristics of the scanned crop. For this reason, a fast, easy-to-configure and precise methodology is necessary to extract such information. The work presented in this poster defines the main features of a procedure carried out with R Software code., This work was partly funded by the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and the Spanish Ministry of Economy and Competitiveness under Grants 2017 SGR 646, AGL2013-48297-C2-2-R and RTI2018-094222-B-I00(PAgFRUIT). The work of Jordi Llorens was supported by Spanish Ministry of Economy, Industry and Competitiveness through a postdoctoral position named Juan de la Cierva Incorporació (JDCI-2016-29464_N18003).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Apple size estimation using photogrammetry-derived 3D point clouds

  • Gené Mola, Jordi
  • Sanz Cortiella, Ricardo
  • Rosell Polo, Joan Ramon
  • Escolà i Agustí, Alexandre
  • Gregorio López, Eduard
In-field fruit monitoring at different growth stages provides important information for farmers. Recent advances have focused on the detection and location of fruits, although the development of accurate fruit size estimation systems is still a challenge that requires further attention. The present work proposes a novel methodology for in-field measurement of spherical fruits using SfMMVS- based point clouds and considering different percentages of fruit occlusions., This work was partly funded by the Secretaria d’Universitats i Recerca de la Generalitat de Catalunya (grant 2017 SGR 646), the Spanish Ministry of Economy and Competitiveness (projects AGL2013-48297-C2-2-R and TEC2016-75976-R) and the Spanish Ministry of Science, Innovation and Universities (grant RTI2018- 094222-B-I00[PAgFRUIT project] by MCIN/AEI/10.13039/501100011033 and by “ERDF, a way of making Europe”, by the European Union).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Yield prediction using mobile terrestrial laser scanning

  • Gené Mola, Jordi
  • Gregorio López, Eduard
  • Sanz Cortiella, Ricardo
  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
Yield prediction provides valuable information to plan the harvest campaign, fruit storage and sales. Traditionally, yield estimation has been carried out by manual counting of randomly selected samples, without addressing spatial variability within the orchard. To obtain a precise estimation it is necessary to sample a relatively large number of trees, which is unfeasible with manual counting. To solve this issue, this work proposes the use of a Mobile Terrestrial Laser Scanner (MTLS) for fruit detection and yield prediction. Experimental test were carried out in a commercial Fuji apple orchard. The row of threes was scanned from the two sides (east and west). The measurement equipment consisted of an MTLS comprised of a LiDAR sensor, and a real-time kinematics global navigation satellite system (RTK-GNSS) connected to a rugged laptop. The LiDAR sensor used was a Puck VLP-16 (Velodyne LIDAR Inc., San José, CA, USA), which provides a 3D point cloud with calibrated reflectance values of the measured scene. The fruit detection algorithm implemented in this work is divided into four steps: (1) Reflectance thresholding, which delete those points presenting a reflectance lower than 60%; (2) Connected Points Clustering using DBSCAN; (3) Fruit separation, which uses a support vector machine (SVM) to predict the number of fruits that contains each cluster; (4) False positive removal, also based on a trained SVM. From detections obtained with this algorithm, the yield was predicted using a linear model (obtained with training data) that relates the number of detections and the actual number of fruits Three different trials were evaluated: east (E) side scanning, west (W) side scanning and merging data from both scanned sides (E+W). As it was expected, fruit detection results showed lower detection rates when only scanning from one tree side, presenting detection rates of 38.3% and 48.5% for east and west sides, respectively. However, the detection rate increased up to 75.8% when using E+W data. Similarly, yield prediction results showed higher errors when using data from only one tree side, obtaining a RMSE of 15.2% and 15.3% (east and west, respectively). The prediction improved significantly when using data from both tree sides (E+W), presenting a RMSE of 5.4%. From these results it is concluded that MTLS has potential in yield prediction in fruit orchards. Although fruit detection rates are moderately successful, the system was able to predict the actual number of fruits with low estimation errors. Only using data from one tree side increases the prediction error, but it has de advantage of reducing a 50% the scanning time, which may be interesting depending on the application and the interest of the farmer. Future works will extend this study to other fruit varieties., This work was partly funded by the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and the Spanish Ministry of Economy and Competitiveness under Grants 2017 SGR 646 and AGL2013-48297-C2-2-R. The Spanish Ministry of Education is thanked for Mr. J. Gené’s pre-doctoral fellowships (FPU15/03355). The work of Jordi Llorens was supported by Spanish Ministry of Economy, Industry and Competitiveness through a postdoctoral position names Juan de la Cierva Incorporació (JDCI-2016-29464_N18003).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Aplicaciones de la teledetección en la caracterización de frutales y en la fertilización de cultivos extensivos

  • Martínez Casasnovas, José Antonio
  • Arnó Satorra, Jaume
  • Daniele, Elisa
  • Escolà i Agustí, Alexandre
  • Sandonís Pozo, Leire
  • Llorens Calveras, Jordi
  • Rosell Polo, Joan Ramon
  • Uribeetxebarria Alonso de Armiño, Asier
Proyecto AgVANCE (AGL2013‐48297‐C2‐2‐R), Proyecto PAgFRUIT (RTI2018‐094222‐B‐I00)
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Fruit detection and 3D location using instance segmentation neural networks and SfM photogrammetry

  • Gregorio López, Eduard
  • Sanz Cortiella, Ricardo
  • Rosell Polo, Joan Ramon
  • Morros Rubió, Josep Ramon
  • Ruiz Hidalgo, Javier
  • Vilaplana Besler, Verónica
  • Gregorio López, Eduard
The development of remote fruit detection systems able to identify and 3D locate fruits provides opportunities to improve the effi-ciency of agriculture management. Most of the current fruit detec-tion systems are based on 2D image analysis. Although the use of 3D sensors is emerging, precise 3D fruit location is still a pending issue. This work presents a new methodology for fruit detection and 3D location, combining the use of instance segmentation neu-ral networks and Structure-from-Motion (SfM) photogrammetry., This work was partly funded by the Secretaria d’Universitats i Recerca de la Gener-alitat de Catalunya (grant 2017 SGR 646), the Spanish Ministry of Economy and Competitiveness (projects AGL2013-48297-C2-2-R and TEC2016-75976-R) and the Spanish Ministry of Science, Innovation and Universities (project RTI2018-094222-B-I00). The Spanish Ministry of Education is thanked for Mr. J. Gené’s pre-doctoral fellowships (FPU15/03355).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Fruit detection and sizing using photonic sensors and artificial intelligence

  • Gené Mola, Jordi
  • Gregorio López, Eduard
  • Sanz Cortiella, Ricardo
  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
The Secretaria d’Universitats i Recerca del Departament d’Economia i Coneixement de la Generalitat de Catalunya, the Spanish Ministry of Education and the Spanish Ministry of Science, Innovation and Universities are thanked the pre-doctoral fellowships 2016FI_B00669, FPU15/03355 and EST18/00487, respectively. The Spanish Ministry of Universities is thanked for the posdoctoral Margarita Salas grant given to Jordi Gené, funded by the European Union-Next Generation EU. The research work was partly funded by the Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya (grant 2017SGR646), the Spanish Ministry of Economy and Competitiveness (project AGL2013-48297-C2-2-R) and the Spanish Ministry of Science, Innovation and Universities (project RTI2018-094222-B-I00).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

A new Leafiness-LiDAR index to estimate light interception in intensive olive orchards

  • Sandonís Pozo, Leire
  • Martínez Casasnovas, José Antonio
  • Escolà i Agustí, Alexandre
  • Rosell Polo, Joan Ramon
  • Rufat i Lamarca, Josep
  • Pascual Roca, Miquel
The 14th European Conference on Precision Agriculture, July 2-6, 2023, Bologna, Italy, Canopy light interception constitutes an important yield limiting factor in high density olive orchards. However, its characterisation still implies laborious measurements. A new index, the Leafiness-LiDAR index (LLI), is presented as a LAI estimator. LLI combines LiDAR-derived parameters: Cross-Section and Leafiness from 3D point clouds. To validate the results, photosynthetically active radiation (PAR) measurements, canopy volume, yield and quality parameters were collected and analysed. LLI showed significant correlations both with PAR and canopy volume (r = 0.8) and quality parameters (r = -0.6). LLI may be useful as an early decision canopy monitoring tool in the framework of Precision Fructiculture., This work was carried out with data acquired in the project IRTA2012-00059-C02-01 funded by the Instituto Nacional de Investigación y Tecnología Agraria y Alimentaria, as well as in the projects AGL2010-22304-C04-03 and AGL2013-48297-C2-2-R funded by the Spanish Ministry of Economy and Competitiveness and developed under the frame of the grants RTI2018-094222-B-I00 (PAgFRUIT project) and PID2021-126648OB-I00 (PAgPROTECT project) by MCIN/AEI/10.13039/501100011033 and by “ERDF, a way of making Europe”, by the European Union.
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Manejo de malas hierbas bajo la línea del viñedo mediante acolchados orgánicos y su efecto sobre el vigor del cultivo

  • Cabrera Pérez, Carlos
  • Llorens Calveras, Jordi
  • Escolà i Agustí, Alexandre
  • Royo-Esnal, Aritz
  • Recasens i Guinjuan, Jordi
En una parcela de viñedo de Raimat (Lleida) cv. ‘Chardonnay’ se estudió, durante la campaña 2019, el efecto de cuatro estrategias de manejo de malas hierbas bajo las cepas: 1) laboreo con intercepas, 2) pases de segadora, 3) acolchado de cáscaras de almendra y 4) acolchado de astillas de pino. Además de la presencia de malas hierbas bajo la línea, se estimó, en nueve cepas distintas y para cada manejo, la longitud de los sarmientos, el potencial hídrico de tallo, el rendimiento y el peso de poda. A su vez, en el mes de julio y agosto se escaneó la parcela con un escáner láser móvil terrestre equipado con sensores LiDAR para la medición del dosel foliar como indicador de vigor. La presencia de malas hierbas fue significativamente menor en los acolchados que en los otros manejos coincidiendo también con diferencias significativas en los otros parámetros. Con acolchados las cepas mostraron mayores valores de longitud de sarmientos, rendimiento, peso de poda y mejor estado hídrico. El sistema basado en LiDAR confirmó estas diferencias a nivel de dosel foliar. Los resultados demuestran que el uso de acolchados orgánicos permite reducir la presencia de malas hierbas y favorecer el vigor de las cepas., Trabajo desarrollado con la financiación de la Agencia Española de Investigación (AEI) con los proyectos AGL2017-83325-C4-2-R y RTI2018-094222-B-I00.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Chemoenzymatic preparation of Chondroitin sulfates with a defined sulfation pattern

  • García-Junceda, Eduardo
  • Bastida, Agatha
  • Doncel-Pérez, Ernesto
  • Montero-Calle, Pilar
  • Moreno-Zafra, Víctor
  • Garrido, Leoncio
  • Revuelta, Julia
  • Fernández-Mayoralas, Alfonso
Comunicación Oral impartida en el XVII European Congress on Biotechnology, No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Origen metabólico de trans-10 cis-15 18:2, un ácido graso detectado por GC con columnas capilares de extrema polaridad en grasa láctea

  • Gómez-Cortés, Pilar
  • Rodríguez-Pino, Valle
  • Fuente, Miguel Ángel de la
  • Juárez, Manuela
  • Martínez Marín, A. L.
Resumen del póster presentado a las II Jornadas Científicas CIAL-Fórum, celebradas durante los dias 16 y 17 de noviembre de 2016 en el Instituto de Investigación en Ciencias de la Alimentación (CIAL)., La grasa láctea es conocida por su gran complejidad en el perfil de ácidos grasos (AG). Su composición se determina comúnmente mediante cromatografía de gases (GC) utilizando columnas capilares polares. En las últimas décadas, la CP-Sil 88 ha sido la columna más empleada por la alta polaridad de su fase estacionaria, que permite resolver gran cantidad de AG. Sin embargo, la aparición de columnas capilares con fases estacionarias consistentes en líquidos iónicos de extrema polaridad (por encima del 100% en la escala de polaridad) ha permitido obtener patrones de elución característicos y una mejor separación de determinados isómeros de AG. Este es el caso de trans-10 cis-15 18:2, un AG que ha sido identificado y caracterizado mediante el empleo de la columna SLB-IL111 en carne de cordero y fluido ruminal. Este trabajo muestra la presencia de trans-10 cis-15 18:2 en grasa láctea y su separación cromatográfica gracias al empleo de una columna de 100 m SLB-IL111, que corrige la co-elución trans-10 cis-15 18:2 + trans-11 cis-15 18:2 característica de la columna CP-Sil 88. Asimismo, con objeto de determinar el origen metabólico del trans-10 cis-15 18:2, se estudió el efecto de la dieta sobre el perfil de AG de la leche de cabra. Se ensayaron cuatro raciones de distinta composición: dieta rica en fibra (F), dieta rica en almidón (A), dieta rica en fibra y suplementada con 30 g/día de aceite de lino (F + LO) y dieta rica en almidón y suplementada con 30 g/día de aceite de lino (A + LO). Los contenidos de trans-10 cis-15 18:2 en las raciones F y A se multiplicaron por ocho en las respectivas raciones cuando incluyeron aceite de lino (F + LO y A + LO). Este hecho, junto a la elevada correlación de trans-10 cis-15 18:2 con cis-9 cis-12 cis-15 18:3 (R2 = 0.98), indicaría que la biohidrogenación del ácido α-linolénico podría conducir a la formación de trans-10 cis-15 18:2 en determinadas condiciones ruminales. Es necesario llevar a cabo más estudios que permitan esclarecer las rutas de biohidrogenación del ácido α-linolénico así como las implicaciones nutricionales sobre la salud humana, de la presencia de trans-10 cis-15 18:2 en los alimentos derivados de rumiantes., Los autores agradecen la financiación otorgada por el Ministerio de Economía y Competitividad a través del proyecto AGL2016-75159-C2-2-R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Composición química y cinética de producción de gas in vitro de subproductos de cítricos, Chemical composition and gas production kinetics of citrus by-products

  • De Evan, T.
  • Haro, A. N.
  • De Blas, C.
  • García Rebollar, P.
  • Ferrer, P.
  • Cerisuelo, A.
  • Ranilla, María José
  • Carro Travieso, Mª Dolores
3 páginas, 3 tablas, 1 figura.--Trabajo presentado a las XVII Jornadas sobre Producción Animal AIDA (Zaragoza, 30 y 31 de mayo, 2017)., The objective of this study was to analyze the chemical composition and in vitro gas production of samples of citrus by-products produced in Spain. Ten samples of citrus pulp (5 from orange and 5 from lemon) and 10 samples of citrus peel (5 from orange and 5 from lemon) were used, and samples of barley grains and sugar beet pulp were included for comparison. The contents (g/kg dry matter) in neutral detergent fibre (189 - 310), sugars (289 - 460), crude protein (513 - 819) and ether extract (34.2 - 57.1) were variable, but in the range reported in the literature. Lemon samples had higher (P<0.05) fiber, crude protein and ether extract contents compared with orange samples, but lower (P<0.05) sugars content. There were no differences (P>0.05) between fractions (pulp vs. peel) in chemical composition. The potential gas production and gas production rate of all by- products were similar to those for barley, but the lag time of the citrus by-products was lower (<0.9 vs. >3.0 h), possibly due to their high sugars content. The results indicate that citrus by-products can be an adequate energy source in the diets of ruminants replacing barley., Este trabajo ha sido realizado en el marco de los proyectos AGL2016- 75322-C2-1-R, AGL2016-75322-C2-2-R y AGL2014-56653-C3-1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Evaluation of parallel differential evolution implementations on MapReduce and spark

  • Teijeiro, Diego
  • Pardo, Xoán C.
  • Penas, David R.
  • González, Patricia
  • Banga, Julio R.
  • Doallo, Ramón
Global optimization problems arise in many areas of science and engineering, computational and systems biology and bioinformatics among them. Many research efforts have focused on developing parallel metaheuristics to solve them in reasonable computation times. Recently, new programming models are being proposed to deal with large scale computations on commodity clusters and Cloud resources. In this paper we investigate how parallel metaheuristics deal with these new models by the parallelization of the popular Differential Evolution algorithm using MapReduce and Spark. The performance evaluation has been carried out both in a local cluster and in the Amazon Web Services public cloud. The results obtained can be particularly useful for those interested in the potential of new Cloud programming models for parallel metaheuristic methods in general and Differential Evolution in particular, Financial support from the Spanish Government (and the FEDER) through the projects DPI2014-55276-C5-2-R, TIN2013-42148-P, and from the Galician Government under the Consolidation Program of Competitive Research Units (Network Ref. R2014/041 and Project Ref. GRC2013/055) cofunded by FEDER funds of the EU, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

FBG reflectivity impact on RIN in ultralong laser amplifiers

  • Rizzelli, Giuseppe
  • Iqbal, M. A.
  • Gallazzi, Francesca
  • Rosa, Pawel
  • Tan, Mingming
  • Corredera, Pedro
  • Ania Castañón, Juan Diego
  • Harper, Paul
42nd European Conference on Optical Communication, Dusseldorf, Germany, 18-22 Sept. 2016 http://ieeexplore.ieee.org/document/7767668/, We analyse, both numerically and experimentally, the relative intensity noise transfer in ultra-long Raman laser amplifiers isolating the combined effect of front-FBG reflectivity and pump power split and quantitatively showing their impact on a 100 km, 2nd-order, bidirectionally pumped configuration., This work was funded by FP7 ITN programme ICONE (608099), Spanish grants ANOMALOS (TEC2015-71127-C2) and SINFOTON (S2013/MIT-2790-SINFOTON-CM)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

The role of distributed Raman amplification in the times of the 'capacity crunch'

  • Ania Castañón, Juan Diego
  • Rosa, Pawel
  • Rizzelli, Giuseppe
  • Gallazzi, Francesca
  • Nuño, Javier
  • Corredera, Pedro
Conferencia invitada ; 18th International Conference on Transparent Optical Networks, Trento, Italy, July 10th-14th, 2016, Distributed Raman amplification has different roles to play in combination with of a range of potential solutions to deal with the nonlinear Shannon limit. Here, we will cover issues such as asymmetry optimisation for optical-phase conjugation nonlinear compensation, the combination of optimised distributed amplification with digital nonlinear compensation techniques and the challenges of adopting high-spectral density formats while still making use of all the possible available bandwidth. Some examples are drawn from recent results from the past few years., The authors wish to acknowledge the financial support of the EU through the FP7 ITN programme ICONE (608099), the Marie Sklodowska-Curie individual fellowship ‘CHAOS’ (658982), as well as Spanish grants ANOMALOS (TEC2015-71127-C2) and SINFOTON (S2013/MIT-2790-SINFOTON-CM)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Enhance catalytic properties of ruthenium complexes supported onto graphene: Dehydrogenative oxidation of primary alcohols in aqueous media

  • Ventura Espinosa, David
  • Vicent, Cristian
  • Baya, Miguel
  • Mata, José A.
Resumen del trabajo presentado al 6th EuCheMS Chemistry Congress, celebrado en Sevilla (España) del 11 al 15 de septiembre de 2016., Despite homogeneous catalysts are in general superior to heterogeneous catalysts in terms of activity and selectivity, their difficult separation from the products and subsequent reutilization is an important drawback that makes industries reluctant to use them in large scale processes. Currently 90 % of industrial catalytic processes make use of heterogeneous catalysts. For these reasons several efforts are being carried out for the immobilization of known and highly active homogeneous catalysts onto solid supports. In this regard we have recently reported the immobilization of ruthenium and palladium organometallic compounds onto graphene materials by p-stacking interactions. In this work, we have synthesized three Ru-NHC complexes bearing different aromatic fragments that allow the immobilization of the complexes onto reduced graphene oxide by non-covalent interactions (Scheme 1). The catalytic properties of the molecular complexes and the new hybrid-graphene materials have been studied in the oxidative dehydrogenation of primary alcohols in water. The results show that the hybrid materials improve the catalytic outcomes compared to the homogeneous complexes, and that the immobilization of the molecular entities onto reduced graphene oxide allows the recovery and reuse of the catalyst., The authors thank the financial support from MINECO (CTQ2015-69153-C2-2-R), Generalitat Valenciana (AICO/2015/039) and Universitat Jaume I (P1.1B2015-09)., Peer Reviewed