Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

Repositori Institucional UIB
Publicación Libro o Monografía (Book)

Salud digital: Aplicaciones móviles, telemedicina y chatbots

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Construct, Merge, Solve & Adapt : A Hybrid Metaheuristic for Combinatorial Optimization

  • Blum, Christian
XVI, 192, 15 b/w illustrations, 43 illustrations in colour., This book describes a general hybrid metaheuristic for combinatorial optimization labeled Construct, Merge, Solve & Adapt (CMSA). The general idea of standard CMSA is the following one. At each iteration, a number of valid solutions to the tackled problem instance are generated in a probabilistic way. Hereby, each of these solutions is composed of a set of solution components. The components found in the generated solutions are then added to an initially empty sub-instance. Next, an exact solver is applied in order to compute the best solution of the sub-instance, which is then used to update the sub-instance provided as input for the next iteration. In this way, the power of exact solvers can be exploited for solving problem instances much too large for a standalone application of the solver., During the time of writing this book, the author was supported as principal investigator of the following three grants funded by MCIN/AEI/10.13039/501100011033: PID2019-104156GB-I00, PID2022-136787NB-I00, and TED2021-129319B-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Mountain Environments: Changes and Impacts

  • García-Ruiz, José María
  • Arnáez-Vadillo, J.
  • Lasanta Martínez, Teodoro
  • Nadal-Romero, Estela
  • López-Moreno, Juan I.
Mountain Environments: Changes and Impacts: Natural Landscapes and Human Adaptations to Diversity, © The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG 2024., The development of this book was supported by the following projects: MANMOUNT (PID2019-105983RB-100/AEI/501100011033) funded by the MICCN-FEDER, MOUNTWATER (TED2021-131982B-100/MCIN/AEI/ 10.13039/501100011033) funded by the MICCN and NextGeneration EU/PRTR, “Impacto del polvo sahariano en la fusion de la nieve en los Pirineos”, funded by the Ministry of Science and Innovation of Spain, and “Cartografía de alta resolución espacial del manto de nieve y su variabilidad reciente en los PPNN de montaña”, funded by the Autonomous Organism of National Parks of Spain. The Geoenvironmental and Global Change (E092_17E) research group was financed by the Aragón Government and the European Social Fund (ESF-FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

N-Heterocyclic Carbene Modified Metal Nanocatalysts

  • Lara, Patricia
  • Suárez, Andrés
Part of the book series: Topics in Organometallic Chemistry ((TOPORGAN,volume 75)), The scientific community has widely studied the synthesis of metal nanoparticles (MNPs) and their applications in a plethora of catalytic transformations for the last 25 years. In these nanometric structures, the catalytic activity and selectivity can be modulated by the controlled tuning of the surface properties of the particles through the use of coordinating donor ligands bound to the metal surface. Among the ligands employed for MNP stabilization, N-heterocyclic carbene (NHC) derivatives have emerged in the last 15 years as a prominent class of compounds due to their strong electron-donor properties and structural diversity. Herein, we discuss the unique ability of NHC ligands to control the reactivity of nanosized metal catalytic systems by describing the synthetic procedures employed for the preparation of NHC-stabilized nanoparticles, their characterization, and the applications of these nanosystems in different catalytic reactions, such as hydrogenation, C-C and C-X bond forming reactions, H/D exchange, oxidation, and electrocatalytic processes., Financial support from MCIN/AEI/10.13039/501100011033/FEDER,UE (TED2021-129181B-I00, PID2022-136570OB-I00) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Book of Abstracts of the 2nd European Meeting on Geological Active Processes and Geomicrobiology of Volcanic Environments: La Palma (Spain), 13-15 March 2025

  • Vegas Salamanca, Juana
  • Martínez-Martínez, Javier
Los autores actúan como editores. - MICROVOLCAVE25, Funded by: The Spanish Ministry of Science, Innovation and Universities from the Spanish Agency of Research (MCIN/AEI/10.13039/501100011033) and the European Union (Next Generation EU/PRTR funding) through the HIRES-SOM project (TED2021-130683B-C21-C22); The Regional Government of Canary Island through the GEOPALMA research project; The Spanish Agency CSIC through the CSIC-LA PALMA-12-20223PAL006 research project; The Regional Government of Andalusia through the MICROLAVA research project (PROYEXCEL_00185)., Peer reviewed
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Libro o Monografía (Book)

Manual de operación. Reactor biológico de filtro anaerobio con membrana de ultrafiltración, Biofactoría inTegrada para la producción de biogás y biocompuestos, absorción de CO2 y depuración de efluentes Agroindustriales (BioTAgro), Integrated Biofactory for biogas and bioproducts production, CO2 absorption and agroindustrial effluents depuration (BioTAgro)

  • Bonilla Ibáñez, Adrián
  • Ramos Rodríguez, Cipriano
  • Diez Blanco, Victorino
  • Cámara Nebreda, José María
  • Cantera Cuartango, Miguel Ángel
En este documento se presenta de forma precisa la información necesaria para la operación y mantenimiento de un prototipo demostrativo de biorreactor anaerobio AnFMBR (PCT/ES2019070061) para el tratamiento de aguas residuales y producción de biogás. El documento está dividido en tres partes. La primera parte está dedicada al biorreactor, circuito de agua y de biogás, la segunda a la instalación eléctrica y, por último, la tercera presenta la filosofía de control, como se ha implementado en un PLC open-source y los comandos principales que permiten modificar las condiciones de operación del biorreactor AnFMBR., Proyecto TED2021-132393B-I00, financiado por MCIN/AEI/10.13039/501100011033 y Unión Europea ‘‘NextGenerationEU’’/PRTR
citaREA. Repositorio Institucional del CITA
Publicación Libro o Monografía (Book)

DigiWaGu: Mejora de la eficiencia en el uso del agua en entornos verdes urbanos a través de herramientas digitales

  • Salvador Esteban, Raquel
  • Casterad Seral, María Auxiliadora
  • Guillén Castillo, Mónica
  • Barba Recreo, Marta
  • Barriuso Vargas, Juan J.
El proyecto DIGIWAGU aborda la escasez de agua en zonas verdes urbanas mediante herramientas digitales para optimizar el riego. Se estudian dos parques piloto en Huesca y Teruel, evaluando eficiencia y uniformidad del riego. Para estimar necesidades hídricas se aplica el método WUCOLS, considerando especies, exposición y densidad vegetal. Se emplean sensores de humedad, microtensiómetros, cámaras fenológicas, drones y estaciones meteorológicas para recopilar datos sobre suelo, vegetación y clima. El objetivo es ajustar dosis y frecuencia de riego, mejorar instalaciones y programación, garantizando un consumo eficiente sin comprometer la salud de jardines y áreas verdes. Se puede extraer como conclusión del proyecto que la combinación de sensores y herramientas digitales es clave para conocer necesidades hídricas y mejorar la eficiencia del riego. Además, es esencial diseñar hidrozonas adecuadas y ajustar calendarios y frecuencias según suelo, sistema y condiciones meteorológicas., DigiWaGu cuenta con el apoyo de la Agencia Estatal de Investigación en el marco del Plan de Recuperación, Transformación y Resiliencia (PRTR), financiado por la Unión Europea – NextGenerationEU. La publicación es parte del proyecto TED2021-131666A-I00, financiado por MCIN/AEI/10.13039/501100011033 y por la Unión Europea “NextGenerationEU”/PRTR.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

New low carbon footprint cement-lime mortar with phase change materials (PCM) and biomass ash for thermal enhancement of buildings

  • Guardia Martín, Cynthia|||0000-0003-4442-8933
  • Guerrero Gil, Ana
  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Ramallo Aznar, Laura|||0000-0003-3822-6868
  • Palomar Herrero, Irene|||0000-0003-2743-3618
Many studies focus on new advanced materials, such as Phase Change Materials (PCMs), to fulfill the increasing requirements for energy efficiency set by the European Commission. PCM have demonstrated thermal properties enhancement as thermal accumulators regarding to other traditional building materials, due to their heating storage capacity. Besides, it is necessary to reduce carbon footprint of plasters and renderings and replacing cement by lime and biomass ashes emerges as a potential solution. This work presents an experimental study on the physical, mechanical and thermal properties of low carbon footprint cement-lime mortars with the addition of PCM (10% and 20%) and the replacement of cement by biomass ashes (10% and 20%). Thermal performance was assessed on mortar pastes, using Differential Scanning Calorimetry, and on mortar samples under different environmental conditions in a climate chamber. The results showed the influence of the addition of PCM on physical and mechanical mortars’ properties, as well as their thermal performance, increasing mortar energy storage capacity. Partial replacement of cement by biomass ash slightly reduced thermal enhancement. It was observed that paste results could be related to mortars properties, which pointed out that paste phase design can be used to obtain target mortar properties., Comisión Europea (Fondos Next Generation), Universidad de Alcalá, Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Estimating energy consumption in households for non-intrusive elderly monitoring

  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Diego Otón, Laura De|||0000-0002-4939-2987
  • Pizarro Pérez, Daniel|||0000-0003-0622-4884
  • Pérez Rubio, María Del Carmen|||0000-0001-8271-6843
  • Villadangos Carrizo, José Manuel|||0000-0001-5900-0978
  • Nieto Capuchino, Rubén|||0000-0002-8293-9665
2023 IEEE International Workshop on Metrology for Living Environment (MetroLivEnv), 29-31 May 2023, Milano, Italy., Population ageing is becoming a key social issue in recent decades, particularly in Western countries, where this fact, together with the increase of life expectancy, has posed a significant strain on public finances and health services. In this context, many technological developments are often proposed to promote and support the independent living of elderly at their own homes, thus avoiding or postponing possible entries into social residences. Among them, smart meters provide a nonintrusive way to monitor and estimate the tenants" daily activities, by only using a single-point measurement in the mains at the entrance of the household. This work describes a regression approach to estimate the energy consumption of a house by means of a LSTM neural network. For that purpose, a pilot has been run on a house during six months in order to collect the electrical data, which will be used later to train the neural network. After that training, the network tries to estimate the energy consumption every 15 minutes, so any deviation between the predicted sample and the measured one might be used to detect anomalies in the daily routine of the tenant., Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Comparative analysis of neural network implementations for NILM applications

  • Martín Catalán, Jorge
  • Diego Otón, Laura De|||0000-0002-4939-2987
  • Tapiador Luque, Miguel
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Nieto Capuchino, Rubén|||0000-0002-8293-9665
2023 38th Conference on Design of Circuits and Integrated Systems (DCIS), 15-17 November 2023, Málaga, Spain., Non-Intrusive Load Monitoring (NILM) comprises a set of techniques that try to disaggregate the energy consumption in a household or building, based on the measurements coming from a single-point smart meter. In this process, a key step is the load identification of the different appliances that may switched on/off during a certain interval under analysis. For that purpose, machine-learning techniques, including deep neural networks, have recently been involved. These classification algorithms may often imply a high computational cost, that might compromise a possible edge-computing implementation on the local smart meters. In this context, this work presents a preliminary comparison between two different real-time implementations of both neural networks, a dense one and a convolutional one, applied to load classification. The implementations are based on a FPGA approach and on a processor. In general terms, preliminary results show that the FPGA solution provides lower latencies than the processor one, at the expense of requiring a higher design effort and a quantization error coming from the fixed-point representation., Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Centralized optical 3D positioning system for emitting tags

  • Aparicio Esteve, Elena|||0000-0001-7886-312X
  • Ureña Ureña, Jesús|||0000-0003-1408-6039
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Moltó Orozco, David|||0000-0002-2790-3758
  • Villadangos Carrizo, José Manuel|||0000-0001-5900-0978
  • Cubero Vacas, Miguel
13th International Conference on Indoor Positioning and Indoor Navigation (IPIN2023), 25-28 September 2023, Nuremberg, Germany., The demand for accurate and reliable local positioning systems has grown rapidly with the increasing use of Location-Based Services (LBS). Emerging technologies such as optical, RF, acoustic, mechanical, and magnetic are feasible options for indoor positioning. Optical-based systems have gained attention due to the widespread LED lamp availability and centimeter-level accuracy. In this context, this work presents the implementation and validation of a centralized optical Local Positioning System (LPS) based on a set of mobile emitter LEDs and a minimum of two fixed receivers, enabling simultaneous position of all tags in the infrastructure (centralized approach). The system is designed for long-distance measurements, using Visible or Infrared Light signals. By incorporating geometric considerations into a Non-Linear Least Squares Estimator (NLSE), the system can estimate the 3D position of a mobile object (i.e. person, drone). The comparison of different deployments demonstrates that the proposed system estimates the 3D position with less than 4mm of error in 90% of cases when using four non-aligned receivers and a single LED., Agencia Estatal de Investigación, Universidad de Alcalá, Junta de Comunidades de Castilla-La Mancha, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Implementing a CNN in FPGA programmable logic for NILM application

  • Tapiador Luque, Miguel
  • Diego Otón, Laura De|||0000-0002-4939-2987
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Nieto Capuchino, Rubén|||0000-0002-8293-9665
2023 38th Conference on Design of Circuits and Integrated Systems (DCIS), 15-17 November 2023, Málaga, Spain., Non-Intrusive Load Monitoring (NILM) techniques are gaining popularity in the field of energy savings. Generally implemented through the use of smart meters, the main challenge with these devices is that they operate at very low sampling rates. To address this issue, FPGA-based systems have been proposed to capture instantaneous currents and voltages at higher sampling frequencies in the kHz range. However, the limitation of these architectures lies in the fact that the acquired windows are often transmitted upstream to the cloud for the application of load classification algorithms based on machine learning, relying on high-bandwidth communications available onsite. This work proposes an alternative approach by implementing the classification algorithms in the same acquisition and processing system, by using custom convolutional neural networks on mid-range FPGA devices. Brevitas and FINN frameworks are used for the quantization-aware training, as well as for the generation of a peripheral that may be integrated into any FPGA-based SoC (System-on-Chip) architecture. The proposed approach allows the whole processing involved in NILM techniques to be integrated into a single embedded system. Preliminary experimental results demonstrate the effectiveness of the proposed approach., Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

3D Printing Architectural Applications of cement-lime mortars with microencapsulated Phase Change Materials (PCM)

  • Márquez Martín, Álvaro|||0000-0001-8554-9614
  • Ramallo Aznar, Laura|||0000-0003-3822-6868
  • Varela Recio, Hugo|||0000-0001-8094-6071
  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Puentes Mojica, Javier|||0000-0001-8748-7664
3D printing technology arouses great interest for its application in architecture on facades and building enclosures that still need to be explored. An experimental study of 3D printing laboratory prototypes using low-carbon ce- ment-lime mortars with microencapsulated Phase Change Material (PCM) was carried out to evaluate its application for adaptative building enclosures. Rheology, extrudability and buildability of PCM cement-lime mortars were assessed. Cellulose fibers and rheology modifiers, as sepiolite nano-clay, were used to enhance mortar properties. Rheological parameters were measured using a Dynam- ic Shear Rheometer (DSR) and Cone Penetration Test (CPT) in fresh state. Fresh compressive strength evolution was assessed by fresh compressive strength test (Squeeze Test) and Early Age monitoring was carried out to keep track of cement hydration and structural build up progress. Extrudability and buildability of mixtures were evaluated by means of RAM Extrusion Test and laboratory 3D printing prototype. This approach provided new knowledge on the design of high thermal performance mortars using digital fabrication in architectural ap- plications, contributing to the digitalization and sustainability of construction and building practice., Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación, Comisión Europea (Fondos Next Generation), Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Integrating machine translation in language learning in the age of artifitial intelligence: a SWOT analysis

  • Sánchez Ramos, María del Mar|||0000-0001-5684-1552
The field of English as a second language (ESL) teaching is increasingly being influenced by machine translation (MT) and the rise of artificial intelligence (AI). In response, ESL pedagogy is exploring how best to incorporate these tools into curricula. Research into MT and AI tools (grouped together for the purposes of this chapter as “MT tools”) in relation to second language learning is in continuous evolution, with several important works advocating for active incorporation of MT in the classroom. At the same time, there are dissenting voices advising against its use, especially in the early stages of language learning. It is within this context that the research reported in this chapter explored Spanish university-level ESL teachers’ use of, and perceptions towards, MT tools. An exploratory mixed methods research design was used to identify the strengths, weaknesses, opportunities, and threats (SWOT) of MT tools in relation to ESL teaching at the University of Alcalá in the 2023-2024 academic year. Eight ESL teachers completed a questionnaire inquiring about their use of MT tools and their perceptions of them in the ESL classroom. The data collected were analysed and interpreted using both thematic and SWOT analysis. Strategies, including establishing greater coordination between teachers and the creation of teacher networks, are proposed as necessary steps towards the effective integration of MT tools in the ESL classroom., Universidad de Alcalá, Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Experimental thermal evaluation of multilayer 3D printed architectural enclosures made of lime-cement mortars with PCM and Cellulose Fibers

  • Ramallo Aznar, Laura|||0000-0003-3822-6868
  • Márquez Martín, Álvaro|||0000-0001-8554-9614
  • Palomar Herrero, Irene|||0000-0003-2743-3618
  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
The reduction of carbon footprint towards sustainability in the con-struction sector demands innovative construction techniques and novel and bio-based building materials to optimize the building process and make it more sus-tainable. This study evaluates experimentally the dynamic thermal performance on hardened lime-cement mortars with Phase Change Materials (PCM) and Cel-lulose Fibers (CF) for 3D printing applications. Four material?s design strategies were followed to reduce carbon footprint: partial substitution of cement by air-lime, addition of a Phase Change Material (PCM) to increase thermal energy ef-ficiency, nanoclays to improve material printability and Cellulose Fibers (CF) to enhance extrudability and enlarge durability. A mortar mixture with 20% of PCM was selected to produce three types of specimens: cast in the mold plate, 3D-printed plate and 3D-printed truss. A multilayer enclosure system with a thermal insulation layer plus a mortar specimen was tested using a climate chamber to simulate dynamic cooling and heating cycles, ranging 15 - 30ºC. The experi-mental results showed that the manufacturing procedure did not modify the high thermal efficiency of the material, while a truss cross-section element largely in-creased energy efficiency of the enclosure system., Universidad de Alcalá, Comisión Europea (Fondos Next Generation), Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

High-rate acquisition system for an infrared LPS

  • Cubero Vacas, Miguel
  • Moltó Orozco, David|||0000-0002-2790-3758
  • Aparicio Esteve, Elena|||0000-0001-7886-312X
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Villadangos Carrizo, José Manuel|||0000-0001-5900-0978
  • Ureña Ureña, Jesús|||0000-0003-1408-6039
2023 38th Conference on Design of Circuits and Integrated Systems (DCIS), 15-17 November 2023, Málaga, Spain., In the last years, the demand for positioning systems based on visible light, infrared light or, in general, optical signals has increased considerably due to their high accuracy and low cost compared to positioning systems based on other technologies, as well as their ease of integration due to their wide presence in domestic and industrial environments. The main constraint of these solutions is that the high speed of light makes the acquisition process complex. This work proposes a complete acquisition architecture for the twelve signals coming from four QADA (Quadrature Angular Diversity Aperture) photoreceptors, based on an analog front-end for signal conditioning at the input, an analog-to-digital converter, and a final digital stage using an FPGA for the acquisition of the data coming from the converter with high data rates up to 16.25 Msps. To verify the system performance, LS (Loosely Synchronized) sequences, often used in positioning systems, are emitted by a LED, and, later, they are acquired and digitally processed successfully by the proposed architecture in some preliminary experimental tests., Agencia Estatal de Investigación, Universidad de Alcalá, Junta de Comunidades de Castilla-La Mancha, European Science Foundation
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Piezoresistive self-compacting concretes (PSSC) with carbon fibers (CF) and nano-fibers (CNF) for structural health monitoring

  • Puentes Mojica, Javier|||0000-0001-8748-7664
  • Palomar Herrero, Irene|||0000-0003-2743-3618
  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
Real-time monitoring of structural health is a key issue for structural safety. Monitoring systems have evolved from external devices into intrinsic selfdetection systems (SDS) becoming diagnostic and monitoring tools useful to maintain and increase structural durability. Furthermore, SDS are an economical and efficient solution for using human and technical resources towards sustainability. Self-sensing materials are considered a promising SDS technology to replace integrated connected or embedded systems, which have many limitations. Self-compacting concrete (SCC) is an advanced material that can become a self-sensing concrete by the incorporation of carbon-based materials, which provide the concrete matrix with piezoresistivity properties, transforming the material into a sensor by itself. The advantage of using SCC lies in its larger paste content which allows the use of hybrid systems of carbon-based additions, such as carbon nanofibres (CNF) and carbon fibres (CF). This combination can produce a synergistic response, improving the properties that can be achieved by incorporating each of them separately. Through the integration of electrical and piezoresistive properties, Piezoresistivity-SSC (PSCC) can collect real-time state variation information relating mechanical responses to piezoresistivity. The aim of this study was to identify the threshold of the effective admixtures content maintaining acceptable workability and achieving PSSC self-sensitivity., Comisión Europea (Fondos Next Generation)
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

La repercusión de la inteligencia artificial y la biovigilancia desde la perspectiva del control de la actividad laboral de las personas trabajadoras

  • López Ahumada, José Eduardo|||0000-0001-7380-5932
El trabajo examina cómo la inteligencia artificial y la biovigilancia impactan en el control de la actividad laboral, analizando sus implicaciones jurídicas y éticas. Se estudian los riesgos para la privacidad y la autonomía de las personas trabajadoras frente a sistemas de vigilancia biométrica y algoritmos predictivos. La investigación aborda la tensión entre eficiencia empresarial y derechos fundamentales, especialmente en materia de protección de datos y dignidad en el trabajo. Además, se revisan los marcos normativos aplicables y las propuestas para garantizar un uso responsable de estas tecnologías., Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Libro o Monografía (Book)

Thermal evaluation of low-carbon lime cement mortars with PCM for 3D printing architectural applications

  • Ramallo Aznar, Laura|||0000-0003-3822-6868
  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Palomar Herrero, Irene|||0000-0003-2743-3618
The design of innovative low-carbon and energy efficient building materials and technologies are on the basis to construction and architecture sustainability. New lime-cement mortars with microencapsulated Phase Change Material (PCM) for 3D printing architectural applications were designed and experimentally evaluated to collaborate into achieving this goal. The innovation comes through integrating three strategies: reducing carbon footprint and embodied energy by partially replacing ordinary Portland Cement (OPC) by lime; enhancing energy efficiency and storage capacity by incorporating microencapsulated PCM; improving printability and buildability for 3D printing architectural enclosures by using rheology modifiers. Eight lime-cement mortars with PCM, Cellulose Fibers (CF) and rheology modifiers, nanoclays and organic VMAs, were designed and characterized in fresh and hardened state to led to an innovative building technology regarding conventional architectural facades. Hardened thermal properties were evaluated by Differential Scanning Calorimetry (DSC) and on reduced scale experimental simulations applying cooling and heating cycles on mortar plate samples using a climate chamber. Hardened mechanical properties were also tested to evaluate compressive and flexural strength. PCM boosted mortars’ thermal performance, improving mass enthalpy up to 60%, while CF slightly attenuated this reduction. Accordingly, PCM lime-cement mortars showed excellent fresh properties to be used for 3D printing digital fabrication in architectural applications, and CF along with rheology modifiers enhanced buildability and thixotropy both in initial and set up times. This study’s main focus is on the mortars’ physical, mechanical and thermal properties., Universidad de Alcalá, Comisión Europea (Fondos Next Generation), Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Libro o Monografía (Book)

Actas de las Jornadas de Concurrencia y Sistemas Distribuidos 2024

  • Boubeta Puig, Juan
  • Rosa Bilbao, Jesús
Este volumen contiene las actas de las Jornadas de Concurrencia y Sistemas Distribuidos 2024 (JCSD 2024) que se celebraron en el Aulario "La Bomba" (Edificio 1812) de la Universidad de Cádiz (UCA), Cádiz, del 10 al 11 de junio de 2024. El objetivo de las JCSD 2024 es dar a conocer el trabajo que los distintos departamentos universitarios, centros de investigación, departamentos de I+D y empresas del sector informático desarrollan en la actualidad en temas relacionados con la concurrencia y los sistemas distribuidos (programación concurrente, sistemas en tiempo real, modelado, análisis y control de sistemas concurrentes, blockchain y lenguajes y arquitecturas, entre otros). Este tipo de evento constituye una excelente oportunidad para que se establezcan vínculos de cooperación entre los distintos grupos de investigación de las distintas universidades españolas. Esta cooperación se suele traducir posteriormente en la petición coordinada de financiación en proyectos de investigación conjuntos. Estas Jornadas también constituyen un excelente foro para que la industria y los centros de investigación coincidan e intercambien intereses y opiniones. Por otra parte, unas jornadas de este tipo dan la oportunidad a investigadores noveles para que puedan dar a conocer a la comunidad nacional sus primeros trabajos de investigación en un evento ya consolidado a nivel nacional. En las JCSD 2024 se aceptaron 15 resúmenes de trabajos para su publicación provenientes del Instituto de Redes IMDEA de Madrid, Instituto de Software IMDEA de Madrid, QSIMOV AI & Quantum Computing de España, Universidad Carlos III de Madrid, Universidad de Cádiz, Universidad de Castilla-La Mancha, Universidad de Chipre, Universidad de Málaga, Universidad de Roma Tres, Universidad de Zaragoza, Universidad del Sur de California y Universidad Politécnica de Madrid. Estos trabajos se organizaron en cinco sesiones y contamos con un total de 40 participantes, entre ponentes y asistentes. Finalmente, nos gustaría agradecer a todas las instituciones que han patrocinado y contribuido al éxito de las JCSD 2024: Ayuntamiento de Cádiz, Delegación Municipal de Turismo de Cádiz, Cámara Oscura de la Torre Tavira, Sociedad de Computación Concurrente y Distribuida, y Universidad de Cádiz., Ayuntamiento de Cádiz, Delegación Municipal de Turismo de Cádiz, Cámara Oscura de la Torre Tavira, Sociedad de Computación Concurrente y Distribuida, y Universidad de Cádiz
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Libro o Monografía (Book)

Los sonidos del inglés en el Camino de Santiago (e-SoundWay): un juego serio para aprender la pronunciacion inglesa

  • Lago Ferreiro, Alfonso
  • Gómez González, María Ángeles
  • Torrado Cespón, Milagros
  • Díaz Lage, José María
Ambientada en el Camino de Santiago, e-SoundWay es una herramienta educativa innovadora para mejorar la pronunciación, la comprensión auditiva, la escritura y la transcripción fonética del inglés. A lo largo de 34 etapas con retos y minijuegos, conocerás lugares, datos históricos, leyendas del Camino y a peregrinos y peregrinas de distintas épocas que te ayudarán a familiarizarte con diversos acentos del inglés. Incluye un manual trilingüe, un laboratorio multimedia online y un código QR con acceso a dos versiones del juego: The Route y FreeRoaming, Agencia Estatal de Investigación | Ref. PID2019-105678RB-C21, Agencia Estatal de Investigación | Ref. TED2021-130283B-C22
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Libro o Monografía (Book)

Performatividad y derecho. Cuestiones teóricas y prácticas

  • Diez García, Javier
  • Gatti, Franco
  • Grajales, Amós Arturo
  • Lombraña, Andrea N.
  • Pacho Blanco, José Manuel
  • Pérez Bermejo, Juan Manuel
  • Rodríguez-Toubes Muñiz, Joaquí
  • Salanueva Brito, Luis Ariel
  • Salvador Gimeno, Santiago
  • Sendín Mateos, José Antonio
  • Uscanga Barradas, Abril
  • Robles Gómez, Claudia Zulema
El volumen reúne una selección de ensayos que exploran la dimensión pragmática del derecho, entendido como práctica social interpretativa y argumentativa. Frente a los estudios que privilegian los aspectos sintácticos y semánticos del razonamiento jurídico, este volumen se centra en su dimensión performativa: la manera en que los juristas no solo interpretan, sino que también crean realidades sociales y políticas. Los trabajos aquí reunidos analizan los efectos performativos tanto en actos de habla argumentativos (como la justificación de decisiones judiciales) como en fenómenos de producción de nuevas realidades jurídicas. A partir de distintos casos prácticos, los autores examinan cómo el derecho no solo regula, sino que constituye el tejido social. Una lectura imprescindible para quienes buscan comprender el impacto transformador del razonamiento jurídico en la práctica., Agencia Estatal de Investigación | Ref. TED2021-129152B-C44, Agencia Estatal de Investigación | Ref. PID2022-136352NB-I00