Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

[Dataset] Source data for the article entitled "Antitumor activity of bimetallic silver/gold nanoparticles against MCF-7 breast cancer cells"

  • García-García , M. Paula
  • Ortega-Pérez, A. Valeria
  • Martínez-Sanmiguel, J. José
  • Martínez Orellana, Lidia
  • Huttel, Yves
[EN] Data collection from the UV-vis spectra and corresponding plot, powder X-ray diffraction data, data collection of cell viability, values of Z-potential and data collection of XPS core level analysis of Ag 3d; Au 4f; C 1s and O 1s with fittings and plots., Programa Bilateral CSIC-TEC Monterrey (ref. BILTC22001); Spanish Ministry of Science and Innovation to grant PID2021-126524NB-100 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe. BILTC22001; PID2021-126524NB-100 SCALAR; RYC2018-024561-I; CEX2023-001286-S, Au_AgNPs UV-Vis.mppz Au_Ag DRX magic plot.mppz Cell viability.xlsx potencial z.xlsx XPS.pxp, No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary materials for Hybrids of deep HOMO organic cyanoacrylic acid dyes and graphene nanomaterials for water splitting photoanodes [Dataset]

  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Orduna, Jesús
  • Villacampa, Belén
  • Blesa, María Jesús
Under a Creative Commons license BY 4.0., S1. Experimental methods of molecular characterization S2. Synthesis of compound ALD Scheme S1. Synthesis of aldehyde ALD S3. Structural characterization Figure S1. 1H‐NMR spectrum of compound ALD (400 MHz, CDCl3). Figure S2. 13C‐NMR (APT) spectrum of compound ALD (100 MHz, CDCl3). Figure S3. FTIR spectrum of compound ALD. Figure S4. HRMS (ESI+) of compound ALD. Figure S5. 1H‐NMR spectrum of compound ASIL-CNCOOH (400 MHz, CDCl3). Figure S6. 13C‐NMR spectrum of compound ASIL-CNCOOH (100 MHz, CDCl3). Figure S7. FTIR spectrum of compound ASIL-CNCOOH. S3. Optical characterization Figure S8. UV-vis absorption spectra of ASIL-CNCOOH and TT-CNCOOH in DCM Figure S9. Concentration dependence of ASIL-CNCOOH dye. UV-vis Absorption spectra in DCM. Figure S10. Concentration dependence of TTCNCOOH dye. UV-vis Absorption spectra in DCM. S4. Electrochemical characterization Figure S11. Differential pulse Voltamogramms: (a) TT-CNCOOH; (b) ASIL-CNCOOH., 1. Experimental methods of molecular characterization Melting points were obtained on a Gallenkamp apparatus in open capillaries and are uncorrected. 1H and 13C-NMR spectra were recorded on a Bruker AV400 at 400 MHz and 100 MHz respectively; δ values are given in ppm (relative to TMS) and J values in Hz. The apparent resonance multiplicity is described as s (singlet), br s (broad singlet), d (doublet), t (triplet), q (quartet) and m (multiplet). 1H-1H COSY and 1H-13C-HSQC experiments were recorded in order to establish peaks assignment. Electrospray mass spectra were recorded on a Bruker MicroToF-Q spectrometer and on a Bruker TIMS-TOF; accurate mass measurements were achieved using sodium formate as external reference. UV-Visible spectroscopy of dye molecules in dichloromethane (DCM) was performed with an UVvis Cary 6000. Differential Pulse Voltammetry (DPV) measurements were performed with a μ-Autolab ECOChemie potenciostat, using a glassy carbon working electrode, Pt counter electrode, and Ag/AgCl reference electrode. The experiments were carried out under argon, in DCM with Bu4NPF6 as the supporting electrolyte (0.1mol L-1). Scan rate was 100 mV s-1., Scheme S1. Synthesis of aldehyde ALD 4-({2-[(tert-butyldimethylsilyl)oxy]ethyl}(methyl)amino)benzaldehyde, ALD At 0°C, 0.25 g (3.75 mmol) of imidazole and 0.56 g (3.75 mmol) of tert-butyldimethylsilyl chloride was dissolved in 5 ml of dry N,N-dimethylformamide (DMF) under argon atmosphere. Next, 0.44 g (2.50 mmol) of 4-((2-hydroxyethyl)(methyl)amino)benzaldehyde was dissolved in DMF and introduced into the former solution. The reaction was maintained for 24 h at room temperature. The DMF was evaporated under reduced pressure, an oil being obtained. It was rinsed with ethyl acetate (3x60 mL). The organic phase was washed with NaCl (3x60mL) and a saturated NH4Cl solution (3x60mL). Finally, the crude was dried with MgSO4, filtered and the solvent was removed. It was purified using column chromatography with hexane/AcOEt (80/20) eluent. Finally, 0.62 g of an orange oil (ALD) was obtained (Yield: 85%). Molecular weight: 293.05 g/mol. FTIR (KBr) cm-1: 1683 (C=O), 1114 (Si-H). 1H-RMN (400 MHz, CDCl3) δ (ppm): 9.73 (s, 1H), 7.72 (d, J= 8.8 Hz, 2H), 6.72 (d, J= 8.8 Hz, 2H), 3.80 (t, J= 5.8 Hz, 2H), 3.60 (t, J= 5.8 Hz, 2H), 3.10 (s, 3H), 0.86 (s, 9H), 0.00 (s, 6H). 13C-RMN (100 MHz, CDCl3) δ (ppm): 190.2, 153.6, 132, 125.1, 111, 60.4, 54.5, 39.5, 25.8, 18.2, -5.5. HRMS (ESI+) m/z: calculated [C16H28NO2Si]+: 294.1889 found 294.1883[M+H]+, Support from Spanish MCIN/AEI/10.13039/501100011033 and MICIU/AEI /10.13039/501100011033 and “ERDF A Way of making Europe” under project grant PID2022-139671OB-I00 and CEX2023-001286-S, as well as from the Gobierno de Aragón (DGA, T03_23R and E47-23R) and Universidad de Zaragoza (UZ2023-CIE-01)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dodecanuclear [NiII8Ln4] clusters: rings of corner-sharing {NiII2Ln2} cubanes (Ln = Dy, Gd, Y}

  • Tziotzi, Thomais G.
  • Agapaki, Eleftheria
  • Charkiolakis, Emmanouil K.
  • Gracia, David
  • Ubach I Cervera, Marc
  • Dalgarno, Scott J.
  • Evangelisti, Marco
  • Brechin, Euan K.
  • Milios, Constantinos J.
[Description of methods used for collection/generation of data] Magnetisation data were collected on MPMS-XL and MPMS3 SQUID magnetometers equipped with 5 and 7 T magnets, respectively. Diamagnetic corrections were applied using Pascal's constants. Heat capacity measurements were carried out on a PPMS equipped with a 9 T magnet and a 3He cryostat, using a thin pressed pellet (ca. 1 mg) of a polycrystalline sample of 2, thermalized by ca. 0.2 mg of Apiezon N grease, whose contribution was subtracted using a phenomenological expression., [Methods for processing the data] An indirect estimation of DS and DT was performed in accordance with standard thermodynamic formulations., The solvothermal reaction of NiCl2.6H2O with 1,3,5-tri(2-hydroxyethyl)-1,3,5-triazacyclohexane, LH3, and Ln(OAc)3.4H2O in the presence of salicylaldehyde in MeOH leads to the formation of the dodecanuclear isostructural species [NiII8Ln4(L’)8(OAc)4(OH)8(H2O)4].xH2O (Ln= Dy, x=6 (1); Gd, x= 24 (2); Y, x= 10 (3); L’ = the dianion of the Schiff-base resulting from the reaction of salicylaldehyde and ethanolamine). The metallic core of the clusters describes a ring a of corner-sharing {Ni2Ln2} cubanes assembled on a central, planar rectangular {Ln4} unit. Magnetization studies conducted on complexes 1 - 3 demonstrate the presence of dominant ferromagnetic exchange at low temperatures, which is largely attributed to the Ni⋯Ni interactions. The significant magnetocaloric effect observed in the Gd analogue has been assessed through heat-capacity and magnetization measurements., This work has received support from EU (MSCA-DN MolCal, 101119865), MICIU/AEI/10.13039/501100011033/ and ERDF/EU (PID2021-124734OB-C21, CEX2023-001286-S), Gobierno de Aragón (E11-23R, E12-23R). CJM and TGT would like to thank the National Recovery and Resilience Plan Greece 2.0 (Award Number TAEDR-0535821), funded by the European Union − NextGenerationEU., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Enhanced magnetoelastic stress in disordered iron-gallium alloy thin films revealed by direct measurement [Dataset]

  • Begué Gracia, Adrián
  • Proietti, M. G.
  • Arnaudas, José I.
  • Ciria, Miguel
[Description of methods used for collection/generation of data] RHEED images (files starting with Fig1b) were collected using a digital camera UK1117m equipped with a Sony ICX415AL sensor. The pixel type is gray with a pixel width of 8 bits and a variable exposure time and gain was used. Film thickness was obtained with a Discover D8 diffractometer with Cu Ka1 radiation (files starting with Fig1c). Bragg-Bentano scans were conducted with a Rigaku X-ray diffraction at Cu Ka radiation. (files starting with Fig1d). Composition was determined using energy-dispersive X-ray spectroscopy (EDX) using a INSPECT-F50 SEM (https://lma.unizar.es/sem-inspect/) and Wavelength Dispersive Spectroscopy (WDS) in an electron probe micro-analyzer (EPMA) instrument (JXA-iHP200F at the Universidad of Zaragoza). Synchrotron X-ray diffraction measurements were conducted at the BM25 beamline of the ESRF synchrotron at room temperature. A monochromatic beam with a wavelength of 0.7 Å was used. (files starting with Fig2). The reference grid is obtained using the MgO reflections of the monocrystalline substrate used to grow the films. Several non-collinear reflections are requested to calculate the matrix elements. Synchrotron XAS measurements were conducted at the Fe and Ga K-edges at beamline I18 of the Diamond UK’s National Light Source at beamline I18 of the Diamond UK’s National Light Source. Magnetization measurements were obtained using nanoMOKE3 magnetometer using laser beam with p-polarization and red (650 nm wavelength) light. High-field lineal correction is applied. Cantilever beam measurements. The magnetoelastic stress was obtained using a cantilever beam method. The sample is clamped by one end, and a constant magnetic field of 100 mT is rotated. The magnetic field is generated by a homemade dipole mounted on a motorized rotatory stage(Standa 8MR190-90-4247). Several turns are performed to correct drifts and other errors. The capacitor is built with the sample that covers a second smaller electrode. The capacitance is measured using an Andeen Hagerling 2500A capacitance bridge at 1kHz. The difference in capacitance with the magnetic field along the beam and forming 90 degrees is used to obtain the magnetoelastic stress. That value is multiplied by the factor indicated in the Appendix. Files starting with Fig6 include the capacitance recollected, Cap, the capacitance with a correction (using a 4-degree polynomial) to eliminate drift, deltaC, the magnetoelastic stress, ME. and the angular position, angle, starting with H along the beam length., [Methods for processing the data] XAS data. The experimental spectra were fitted by theoretical EXAFS signals calculated by ab initio theoretical phase and amplitudes generated for a cluster of 78 atoms with a radius of 6.1 Å-1, by the TKAtoms code. The central absorber was a Ga or Fe atom with only one kind of Ga (Fe) scatterer. The alloying FeGa effect was obtained by combining the pure Ga-Fe(Ga) and Fe-Fe(Ga)systems at the Ga and Fe K-edge, respectively. The 8.01 Feff code generated the theoretical phase-shifts and amplitudes taking into account beam polarization. The ATHENA and ARTEMIS packages were used for extraction and best-fit procedure of the EXAFS spectra. The best-fit analysis for the two polarizations was performed simultaneously in q-space, in the range 2 - 11 Å-1, by Fourier Filtering of the first peak contribution of the FT spectra that is due to the first and second coordination shells. The contributions of next neighbor (NN) and next-nearest-neighbor (NNN) atoms are merged into a single FT peak due to the proximity of the interatomic distances values (2.48 Å and 2.87 Å respectively in pure bcc Fe). The best-fit parameters were the origin of the photoelectron energy E0, the Ga population in NN and NNN environments, the interatomic distances of first and second coordination shells, and the Debye-Waller factors. The FDMNES code is used to perform \textit{ab initio} simulations of the XANES spectra., The large magnetostriction in FeGa alloys is relevant for manifold applications, but for thin films, it can play a prominent role in controlling the strength of the magnetic anisotropy. Bulk samples show values depending on the extensive preparation procedure compendium, which is limited in its temperature range for high-quality thin-film synthesis. Here, we present a study of the magnetoelastic coupling coefficients B1 and B2 in epitaxial FeGa thin films below 50 nm deposited on the MgO(001) surface at 150 ºC by the cantilever method. Series of films with 22, 28, and 33 at. % Ga do not show thickness-dependent variations for B1 and B2, but -B1 for the 22 at. % Ga composition is 10 MPa, roughly 2 times the bulk value and smaller than the bulk-like value of -B1=12.1 MPa obtained for a film with 17 at. % Ga. This enhancement is correlated with the A2 crystal structure for the film rather than the coexistence with D03 or other ordered nanometric precipitates proposed for bulk samples. Synchrotron diffraction excludes the formation of long-range L60, or D03 precipitates in samples with (001)A2 peaks at concentrations around 25 at. % Ga, which implies partial chemical disorder. The analysis of extended x-ray absorption fine structure measurements points to a D03 local order with a residual number of Ga-Ga pairs. Considering that the substrate quenches the movable strain in the A2 phase described in dual-phase structures, our results point to the important role of the electronic structure of the iron atoms modified by the presence of Ga in the alloy. This effect enlarges B1 in films with the A2 phase, stabilized using epitaxial growth., This work was funded by MICIU/AEI/10.13039/501100011033, ERDF/UE, and NextGenerationEU/PRTR (PID2021-124734OB-C21, CEX2023-001286-S, TED2021-131064B-I00), Gobierno de Aragón (E12-23R) and Ministry of Universities and the European Union-Next Generation for the Margarita Salas fellowship., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., File List: Fig1b_33_13[100].png Fig1b_33_13[110].png Fig1b_17_48[110].png Fig1b_17-48[100].png Fig1b_MgO_[110].png Fig1b_MgO_[100].png Fig1c28_11.cvs Fig1c28_20.cvs Fig1c28_41.cvs Fig1d33_17.cvs Fig1d28_41.cvs Fig1d21_19.cvs Fig2b_l1.cvs Fig2b_l05.cvs Fig2b_l0.cvs Fig2c_l1.cvs Fig2c_l05.cvs Fig2c_l0.cvs Fig3a_21_10par.cvs Fig3a_21_10perp.cvs Fig3a_28_11par.cvs Fig3a_28_11perp.cvs Fig3a_33_13par.cvs Fig3a_33_13perp.cvs Fig3b_21_10par.cvs Fig3b_21_10perp.cvs Fig3b_28_11par.cvs Fig3b_28_11perp.cvs Fig3b_33_13par.cvs Fig3b_33_13perp.cvs Fig3c_33_13parData.cvs Fig3c_33_13parFit.cvs Fig3c_33_13perpData.cvs Fig3c_33_13perpFit.cvs Fig4a_22_10.cvs Fig4a_22_33.cvs Fig4a_28_41.cvs Fig4a_33_13.cvs Fig4a_33_25.cvs Fig4b_22_12.cvs Fig4b_B2.cvs Fig4b_D03.cvs Fig4c_22_12.cvs Fig4c_B2.cvs Fig4c_D03.cvs Fig5aFe100.cvs Fig5aFe110.cvs Fig5b21_19_100.cvs Fig5b21_19_110.cvs Fig6_B1_22_10.cvs Fig6_B1_22_19.cvs Fig6_B1_22_33.cvs Fig6_B1_28_11.cvs Fig6_B1_28_20.cvs Fig6_B1_28_31.cvs Fig6_B1_33_13.cvs Fig6_B1_33_25.cvs Fig6_B1_33_36.cvs Fig6_B2_22_10.cvs Fig6_B2_22_19.cvs Fig6_B2_22_33.cvs Fig6_B2_28_11.cvs Fig6_B2_28_20.cvs Fig6_B2_28_31.cvs Fig6_B2_33_13.cvs Fig6_B2_33_25.cvs Fig6_B2_33_36.cvs Fig6d.cvs, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

A linear {Fe2Ni} cluster and a structurally closely related quasi one-dimensional {Fe2Ni} chain

  • Charkiolakis, Emmanouil K.
  • Gracia, David
  • Ubach I Cervera, Marc
  • Evangelisti, Marco
  • Milios, Constantinos J.
The solvothermal reaction between FeCl3·6H2O, NiCl2·6H2O, 2-hydroxynaphthaldehyde, and glycine in MeOH results in the formation of the trinuclear heterometallic cluster [FeΙΙΙ2NiΙΙ(L1)4(MeOH)4] (1) in good yield, while the same reaction upon replacing glycine with dimethyl-glycine, results in the formation of the closely related quasi one-dimensional coordination polymer {[FeΙΙΙ2NiΙΙ(L2)4(MeOH)2]n} (2) (L1, L2: the dianionic form of the Schiff-base ligand derived from the condensation of 2-hydroxynaphthaldehyde and glycine (L1 for 1), or dimethyl-glycine (L2 for 2)). The structure of 1 describes a linear trimetallic {FeIII2Ni} unit, whereas complex 2 consists of repeating linear {FeIII2Ni} units with each one connected to two neighbouring units via four coordination bonds, forming a quasi one-dimensional chain. The structural similarity between complex 1 and the repeating unit of complex 2 is remarkable. However, their magnetic properties differ significantly, with complex 1 displaying dominant ferromagnetic interactions, and complex 2 showing antiferromagnetic interactions., This work has received support from EU (MSCA-DN MolCal,101119865), MICIU/AEI/10.13039/501100011033/ and ERDF/EU (PID2021-124734OB-C21, CEX2023-001286-S), Gobierno de Aragón (E11-23R, E12-23R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information for Fabrication of α-Fe2O3 nanoparticles/g-C3N4 direct Z-scheme heterojunction of durable photocatalytic activity [Dataset]

  • Galán, Alejandro
  • Fernández-Pato, Isaías
  • Zaluzec, Nestor J.
  • Cambré, Sofie
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
Under a Creative Commons BY 4.0 license., Detailed structural information obtained from XRD and Rietveld refinement of the hybrids, UV−vis spectra of all the as-prepared photocatalysts, FESEM images of the control and hybrid photocatalysts, schematic of the g-C3N4 cleavage and impregnation, additional XPS spectra of α-Fe2O3 NPs and α-Fe2O3/g-C3N4 hybrid, additional degradation experiments, and table comparing the photocatalytic activity of different material systems., S1. X-ray diffraction Figure S1. XRD pattern of the (1 0 0) peak of g-C3N4 and hybrid materials. Table S1. Crystallographic parameters of hematite NPs and hybrid materials. S2. UV-vis absorption spectroscopy Figure S2. UV-vis spectra of the reference and hybrid materials. S3. XPS of Fe 2p core spectra Figure S3. Fe 2p XPS spectra of α-Fe2O3 NPs and α-Fe2O3/g-C3N4 hybrid. S4. Cleavage and impregnation of g-C3N4 Figure S4. Schematic of the cleavage and impregnation process of the g-C3N4 sheets. S5. High resolution FESEM Figure S5. High-resolution FESEM micrographs of α-Fe2O3 NPs, g-C3N4 and hybrids. S6. Additional photocatalytic MB degradation results Figure S6. Effect of H2O2 and UV light on MB degradation. Figure S7. Comparison between UV and white ligh on MB degradation. Figure S8. MB degradation using different concentrations of photocatalyst. Figure S9. Comparative degradation of MB, RhB and MR. Figure S10. XRD analysis of the photocatalyst after recycling experiment. Figure S11. UV-vis spectra of time-dependent MB degradation. S7. Comparative table Table S2. Comparison of the photocatalytic activity and degradation time employing different material systems and experimental conditions. S8. References., Funding from Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grant PID2022-139671OB-I00, as well as from the Gobierno de Aragón (DGA) under projects T03_23R (Grupos de Investigación Reconocidos), is acknowledged. A.G.-G. is thankful for his Margarita Salas Postdoctoral Fellowship grant (RSU.UDC.MS21). R.A. acknowledges funding by the Spanish MICIU (PID2019-104739GB-I00/AEI/10.13039/501100011033, PID2023-151080NB-I00/AEI/10.13039/501100011033, and CEX2023-001286-S MICIU/AEI/10.13039/501100011033) and by DGA under project E13-23R. The work at Argonne National Laboratory (N.J.Z./R.A.) was supported by the Advanced Materials for Energy Water Systems (AMEWS) Center, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences at Argonne National Laboratory under contract DE-AC02-06CH11357, as well as in part by the National Science Foundation Major Research Instrumentation (MRI) Program (NSF DMR-2117986) at the University of Chicago. The Argonne Picoprobe AEM was developed under CRADA 1300701 between Argonne National Laboratory and Thermo Fisher Scientific Instruments. S.C. thanks the Fund for scientific research - Flanders (FWO) for infrastructure funding for the EPR equipment (I004920N)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Enhanced magnetoelastic stress in disordered iron-gallium alloy thin films revealed by direct measurement

  • Begué Gracia, Adrián
  • Proietti, M. G.
  • Arnaudas, José I.
  • Ciria, Miguel
The large magnetostriction in FeGa alloys is relevant for manifold applications, but for thin films, it can play a prominent role in controlling the strength of the magnetic anisotropy. Bulk samples show values depending on the extensive preparation procedure compendium, which is limited in its temperature range for high-quality thin-film synthesis. Here, we present a study of the magnetoelastic coupling coefficients B1 and B2 in epitaxial FeGa thin films below 50 nm deposited on the MgO(001) surface at 150 ºC by the cantilever method. Series of films with 22, 28, and 33 at. % Ga do not show thickness-dependent variations for B1 and B2, but -B1 for the 22 at. % Ga composition is 10 MPa, roughly 2 times the bulk value and smaller than the bulk-like value of -B1=12.1 MPa obtained for a film with 17 at. % Ga. This enhancement is correlated with the A2 crystal structure for the film rather than the coexistence with D03 or other ordered nanometric precipitates proposed for bulk samples. Synchrotron diffraction excludes the formation of long-range L60, or D03 precipitates in samples with (001)A2 peaks at concentrations around 25 at. % Ga, which implies partial chemical disorder. The analysis of extended x-ray absorption fine structure measurements points to a D03 local order with a residual number of Ga-Ga pairs. Considering that the substrate quenches the movable strain in the A2 phase described in dual-phase structures, our results point to the important role of the electronic structure of the iron atoms modified by the presence of Ga in the alloy. This effect enlarges B1 in films with the A2 phase, stabilized using epitaxial growth., We thanks grant TED2021-131064B-I00 funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR, grant PID2021-124734OB-C21 funded by MCIN /AEI /10.13039/501100011033 and by “ERDF A way of making Europe” and grant CEX2023-001286-S funded by MICIU/AEI /10.13039/501100011033 and Gobierno de Aragón, Spain (grant E12-23R). A. B. would like to acknowledge the funding received from the Ministry of Universities and the European Union-Next Generation for the Margarita Salas fellowship . We are grateful to the staff of beamline I18 at Diamond UK’s National Synchrotron Light source and BM25 Spain Beamline at ESRF for their strong support in performing the experiments. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node Laboratorio de Microscopias Avanzadas (LMA) at Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Large sub-Kelvin Magnetocaloric Effect and Phase Behavior of Gadolinium Nitrate Hexahydrate [Dataset]

  • Gracia, David
  • Ubach I Cervera, Marc
  • Charkiolakis, Emmanouil K.
  • García, Inés
  • Milios, Constantinos J.
  • Evangelisti, Marco
Continuous-wave electron paramagnetic resonance (EPR) measurements on a 1% diluted polycrystalline sample of [Gd@Y(NO3)3]6H2O were recorded using a Bruker Elexys 580 spectrometer operating in X-band (9.715 GHz). The spectrometer was equipped with an Oxford CF900 continuous-flow cryostat, which employs liquid-helium to cool down the sample environment. The microwave power was adjusted to avoid saturation effects. The magnetic field was measured with a Bruker ER035 gaussmeter. Direct-current (DC) magnetic measurements were performed on a polycrystalline powder sample (ca. 5 mg), loaded into a plastic capsule and immobilized with eicosane wax to prevent grain movement. Isothermal magnetization curves were collected in magnetic fields between 0-7 T over the temperature range 2-10 K. DC magnetic susceptibility data were recorded over the same temperature range under a constant applied magnetic field of B=0.1 T. All data obtained were corrected for diamagnetic contributions coming from both the sample holder and eicosane wax. In addition, the complex alternating-current (AC) magnetic susceptibility was measured under zero applied magnetic field over the temperature range 0.05-4 K, using a frequency of 525 Hz and an AC field amplitude of 2·10^{-4} T. A thin pressed polycrystalline pellet (ca. 6 mg) was prepared for these experiments, and susceptibility data were initially recorded in arbitrary units. Absolute values of the real component were obtained by comparison with DC susceptibility data collected with the MPMS-3 in the overlapping temperature range (2-4 K), where dissipative processes are negligible. The imaginary component is reported in arbitrary units. Heat capacity measurements were carried out using the relaxation method in a Quantum Design PPMS equipped with a 3He cryostat, covering temperatures down to 0.4 K under constant magnetic fields from 0 to 7 T. Additional measurements extended to 0.05 K under fields up to 1 T using a Quantum Design PPMS DynaCool with DR module. Samples consisted of thin pressed polycrystalline pellets (ca. 1 mg for 3He and ca. 0.2 mg for DR). In both setups, Apiezon N grease (0.2 mg) was applied to ensure good thermal contact between the sample and the calorimeter platform. Its contribution to the total heat capacity was subtracted using a phenomenological correction. Direct quasi-adiabatic MCE measurements were performed for complete demagnetization processes. For these experiments, a pressed polycrystalline pellet of ca. 5 mg was mounted on a calorimeter platform coated with ca. 0.2 mg of Apiezon N grease to improve thermal coupling. In addition, the MCE was also evaluated indirectly by applying standard thermodynamic relations to the measured magnetization and heat capacity data., We report a comprehensive magnetothermal study of the classical gadolinium salt [Gd(NO3)3]·6H2O at temperatures approaching absolute zero. Despite its long-standing availability as a commercial compound, its magnetocaloric properties have remained unexplored. Using electron paramagnetic resonance, magnetic susceptibility, heat capacity, and direct measurements of the magnetocaloric effect, we reveal that weak dipolar interactions combined with axial crystal-field anisotropy drive antiferromagnetic ordering at T_N = 0.21 K. Remarkably, [Gd(NO3)3]·6H2O exhibits an isothermal magnetic entropy change of -\Delta S_m = 26.1 J / K kg at T = 0.6 K for a modest field variation of Delta-B = 1 T, and an adiabatic temperature change of Delta-T_ad = 5.0 K at T = 1.6 K for the same Delta-B, outperforming many state-of-the-art Gd-based refrigerants. These results provide a reference for understanding magnetocaloric behavior in hydrated salts and highlight the interplay between crystal-field anisotropy and dipolar coupling at ultra-low temperatures., This work was funded by EU (MSCA-DN MolCal, 101119865), MICIU/AEI/10.13039/501100011033/ and ERDF/EU (PID2021-124734OB-C21, PID2024-159457OB-C21, CEX2023-001286-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Tetradecanuclear {Ni9Ln5} clusters featuring encapsulated {Ln5} bipyramids: Modular 3d-4f architectures with broad-range magnetocaloric response

  • Tziotzi, Thomais G.
  • Asmargiannaki, Evangelia G.
  • Thamm, Ben
  • Dalgarno, Scott J.
  • Charkiolakis, Emmanouil K.
  • Ubach I Cervera, Marc
  • Gracia, David
  • Evangelisti, Marco
  • Milios, Constantinos J.
Magnetisation data were collected on a QD-MPMS3 SQUID magnetometer equipped with a 7 T magnet. Diamagnetic corrections were applied using Pascal's constants., Heat capacity measurements were carried out on a QD-PPMS equipped with a 9 T magnet and a 3He cryostat, using a thin pressed pellet (ca. 1 mg) of polycrystalline samples of 1 and 3, thermalized by ca. 0.2 mg of Apiezon N grease, whose contribution was subtracted using a phenomenological expression., Crystallographic data for compounds 1 - 3 have been deposited at the CCDC under numbers 2533099 - 2533101, respectively, and can be obtained from https://www.ccdc.cam.ac.uk/structures/., The solvothermal reaction between Ni(HCOO)2.2H2O, 2-aminoisobutyric acid (aibH), Ln(OAc)3·6H2O (Ln = Gd, Y, Dy) and NEt3 in MeOH/MeCN affords the tetradecanuclear [Ni9Ln5(OH)9(aib)12(OAc)x(ΗCOO)y].12MeCN complexes (Ln= Gd, x=6, y=6, 1.12MeCN; Ln= Y, x=6, y=6, 2.12MeCN; Ln= Dy, x=3, y=9, 3.12MeCN) in good yields. All three clusters are isostructural, featuring a trigonal bipyramidal {Ln5} core encapsulated within a triply edge-capped {[NiII3]NiII6} trigonal prism. Magnetic measurements reveal dominant ferromagnetic intermolecular interactions in the Gd and Dy analogues, whereas the Y derivative exhibits weak antiferromagnetic behavior. Magnetothermal and heat-capacity measurements for 1.12MeCN indicate a significant magnetocaloric effect, reaching −∆Sm= 29.0 J kg-1K-1 for full demagnetization from B = 7 T at T = 3.0 K, while sustaining large −ΔSm(T,ΔB) and ΔTad(T,ΔB) responses across an unusually broad temperature range., This work has received support from EU (MSCA-DN MolCal, 101119865), MICIU/AEI/10.13039/501100011033/ and ERDF/EU (PID2024-159457OB-C21, CEX2023-001286-S). CJM and TGT would like to thank the National Recovery and Resilience Plan Greece 2.0 (Award Number TAEDR-0535821), funded by the European Union − NextGenerationEU., CEX2023-001286-S, Figure 5: T1, T2, T3 = temperature for compounds 1, 2 and 3, respectively. x1, x2, x3 = magnetic susceptibility for compounds 1, 2 and 3, respectively. T2fit, x2fit = simulated temperature and susceptibility for compound 2. B = applied magnetic field M2K, M3K = molar magnetization at 2K and 3K, respectively. Bfit, M2Kfit = simulated magnetic field and magnetization at 2K Figure 6: T0, T1T = temperature for zero applied magnetic field and 1T, respectively. C0, C1T = molar heat capacity for zero applied magnetic field and 1T, respectively. T0fit, C0fit = simulated temperature and heat capacity for zero applied magnetic field. Figure 7: TDSmC = temperature for magnetic entropy change (DSm) data calculated from heat capacity (C). DSmC1T = DSm calculated from C for 1T applied magnetic field. TDSmM = temperature for DSm data calculated from magnetization (M). DSmC1T = DSm calculated from M for 1T applied magnetic field. TDTad = temperature for adiabatic temperature change (DTad) data. DTad1T = DTad for 1T applied magnetic field., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Temperature-driven elastocaloric enhancement in liquid crystal elastomers

  • Rojo, Kenneth Roy
  • Cosculluela, Carlos
  • Téllez, Pedro
  • Sánchez-Somolinos, Carlos
  • Evangelisti, Marco
[Description of methods used for collection/generation of data]: Differential scanning calorimetry measurements were performed using DSC Q1000 (TA Instruments) on both the LCE and its precursor. The sample pan utilized for both measurements was the hermetically sealed Tzero aluminum pan (TA Instruments). The heating rate was consistently maintained at 5 °C/min. The temperature modulation parameters were set to a period of 50 seconds and an amplitude of ± 0.663 °C. Before each heating procedure, a 15-minute isothermal interval was applied to allow the equipment to stabilize and reach the designated modulation parameters. Three heat cycles were programmed per measurement with each heat-cool cycle followed by a Newtonian cooling quench. The initial and secondary heat-cool cycles effectively erased the thermal history of the samples. The values presented herein were gathered from the third and final heating cycle. Broadband Dielectric Spectroscopy (BDS) measurement of the prepared LCE material was taken using the Alpha-Beta Impedance Analyzer (Novocontrol). The measurement frequency range was 10^[-1] to 10^[7] Hz. The sample was positioned between 20-mm diameter gold-plated electrodes and subsequently loaded into the Active Sample Cell (Novocontrol) sample stage. The sample was proportioned with a larger diameter than the electrodes to ensure an overhang and prevent short-circuit. The root mean square of the applied AC voltage was 1.0 Vrms. To investigate the polymer dynamics, dielectric measurements were conducted in isothermal mode with a temperature step value of 5 °C/min from -120 to 100 °C/min. The temperature control of each isothermal measurement was maintained by the Quatro Cryosystem (Novocontrol), exhibiting a temperature stability better than ± 0.28$ K. Dynamic mechanical analysis (DMA) measurements were performed using DMA Q800 (TA Instruments) in tension mode. LCE samples were portioned into 25~mm long strips with a width of 2-6 mm. The single-frequency measurement was conducted at a frequency of 1~Hz. The oscillation amplitude was set to 0.37 strain. The sample was initially equilibrated at -100 °C for 5 minutes and then heated up to 70 °C at a heating rate of 2 °C/min. Tensile equipment: A custom-built tensile setup was developed to perform the deformation cycles required for direct measurements of the eC effect. A belt-drive motor provided strain load with an accuracy of ± 0.1 mm. The loading strain rate was set such that the loading strain was reached within 0.2 s, while unloading was performed at the maximum attainable rate of the motor, corresponding to -1200 mm/s. The sample stage was enclosed within a PID-controlled heating chamber to enable precise temperature regulation. The tensile apparatus was housed inside a polystyrene enclosure for temperature regulation, and active cooling was achieved by introducing a controlled nitrogen gas flow into the enclosure. Temperature measurements: Infrared thermography was employed to conduct contact-less temperature measurements. A FLIR A655sc (Teledyne FLIR) with 25°C field of view is pointed towards the thermal window of the polystyrene case. To minimize IR reflections and background noise, the upper surface of the polystyrene enclosure was uniformly covered with black electrical tape. All IR videos were captured at a frame rate of 50 frames per second. The sample temperature was extracted as the mean value of the central third of the visible LCE surface, both in the undeformed and elongated states., [Methods for processing the data]: For elastocaloric measurements, the initial temperature was defined as the time‑equilibrated temperature of the undeformed sample region immediately prior to loading. Following deformation, temperature values were obtained from the corresponding central region of the elongated sample, and after unloading from the central region of the recovered geometry. In cases where partial out‑of‑focus regions arose due to sample bending or delayed geometric recovery, temperature analysis was restricted to the central in‑focus area. The adiabatic temperature change was determined relative to the initial equilibrated temperature preceding each loading or unloading event. For BDS measurements, the characteristic relaxation time of every molecular motion was simulated using either Havriliak-Negami (for cooperative relaxations) or Cole-Cole equation (for local relaxations)., Liquid crystal elastomers exhibit promising elastocaloric behavior, yet all direct measurements reported to date have been restricted to room temperature. Here, we perform variable-temperature direct elastocaloric measurements on an isotropic liquid crystal elastomer using a custom tensile setup coupled with infrared thermography, enabling fast mechanical cycling across a broad temperature range. As temperature decreases from ambient conditions, the elastocaloric response increases markedly, peaking near –3.5 ◦C with adiabatic temperature changes of ∆T+ = 3.94 ◦C and ∆T− = −4.33 ◦C at 60 % strain. By correlating these measurements with a detailed investigation of polymer dynamics, we identify a finite temperature window in which the elastocaloric response is maximized. This optimum arises from kinetic timescale matching between molecular relaxations and the mechanical loading-unloading cycle. These results establish kinetic control as a key factor governing the temperature dependence of elastocaloric performance in liquid crystal elastomers., This work was funded by EU (MSCA-DN MolCal, 101119865), MICIU/AEI/10.13039/501100011033/ and ERDF/EU (PID2024-159457OB-C21, CEX2023-001286-S), Gobierno de Aragón (PROY_E28_24), ERDF/EU and Fondo Social Europeo (DGA E15_20R), CIBER - Consorcio Centro de Investigación Biomédica en Red (CB06/01/00263), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

High-quality epitaxial five-layer Aurivillius films with in-plane ferroelectricity for electrocaloric cooling [Dataset]

  • Lafuerza, Sara
  • Blasco, Javier
  • Evangelisti, Marco
  • Subías, Gloria
  • Gracia, David
  • Pardo, José A.
  • Barriuso, Eduardo
  • Torrelles, Xavier
  • Padilla-Pantoja, Jessica
  • Caicedo, José Manuel
  • Santiso, José
[Description of methods used for collection/generation of data]: The structural characterization of the films was performed by X-ray diffraction (XRD) 2θ/ω wide scans, X-ray reflectivity (XRR) and reciprocal space maps (RSMs) of selected asymmetric reflections, by using a four-circle X-ray diffractometer (Malvern-Panalytical X'pert Pro MRD) and standard Cu Kα1,2 X-ray source with a parabolic mirror (for reciprocal space maps, a 2xGe(220) monochromator was added to the incident optics). A 2D array PIXcel detector was used. The topography of selected films was studied using atomic force microscopy (AFM) in contact mode (Keysight 5100) over different areas. The structure of the films was also analyzed by high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) on a Fisher Spectra microscope operated at 200 kV. Cross-section lamellas were prepared by focused ion beam (FIB) on a SBTO5 film deposited under optimized conditions, with the cut oriented to show STO [100] zone axis., [Ferroelectric and Electrocaloric Properties]: These properties were investigated by measuring the in-plane polarization using the IDEs with a 500 V-built-in ferroelectric tester (Precision Premier II model, Radiant Technologies). Hysteresis measurements were carried out based on a bipolar triangular wave excitation, and also remanent hysteresis measurements based on half triangular waves following the principle of the positive-up negative-down (PUND) method. The frequency of the triangular wave excitation was set to 2 kHz for both measurement protocols. Temperature (T)-dependent polarization versus E field, P(E, T) curves, were measured on heating in a dedicated homemade cell allowing a maximum temperature of 140 °C. Samples were immersed in a silicon oil bath during the polarization measurements to avoid electric discharges., High-quality purely c-axis oriented epitaxial thin films of the Aurivillius phase Sr2Bi4Ti5O18 with n = 5 (Sr,Bi)TiO3 perovskite-like layers, are grown on SrTiO3 substrates by pulsed laser deposition. The highest crystalline quality is obtained with a 20 wt.% Bi-excess target and average stacking order values in the proximity of the ideal value n = 5 are attained for an optimum deposition temperature of 650 °C. Scanning transmission electron microscopy reveals regions with n ranging from 4 to 6 around an average thickness of n = 5, in agreement with the X-ray diffraction analysis. Interdigital electrodes are used to probe the in-plane polarization and survey the electrocaloric properties. A maximum adiabatic temperature change of ΔT ∼ 0.95 °C for an electric field of 150 kV cm−1 is observed at ≈135 °C. Larger values are expected at higher temperatures around the ferroelectric Curie temperature, TC. Since TC of Sr2Bi4Ti5O18 can be tuned by codoping, the findings pave the way toward a large electrocaloric effect at ambient temperature., S.L. acknowledges funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 101029019. This work was also supported by Ministerio de Ciencia, Innovación y Universidades (PID2021-124734OB-C21), “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2023-001286-S, CEX2023-001263-S and CEX2021-001214-S) and Diputación General de Aragón (E11-23R, E12-23R). D. G. acknowledges financial support from the Gobierno de Aragón through a doctoral fellowship. Authors would like to acknowledge C. Cosculluela from Unidad Técnica en Ingeniería de Microdispositivos (INMA) and R. Valero for the IDEs fabrication at the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas”, through Servicio General de Apoyo a la Investigación from Universidad de Zaragoza. The authors also acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. J. S. acknowledges B. Mundet, F. Belarre and M. Rosado for the STEM images and FIB fabrication of the lamellas, as well as the financial support of the European Commission through the Horizon H2020 funding by H2020-MSCA-RISE-ID:101007825 –ULTIMATE-I. X. T. acknowledges financial support by Ministerio de Ciencia, Innovación y Universidades (PID2021-123276OB-I00)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001263-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Exploring a route to induce ferromagnetism on Sr3Sn2O7 by co-doping with non-Jahn-Teller-distorted Mn3+ and La3+ cations [Dataset]

  • Blasco, Javier
  • Cuartero, Vera
  • Lafuerza, Sara
  • Gracia, David
  • Puente-Orench, Inés
  • Rodríguez-Velamazán, J. A.
  • Herrero Martín, Javier
  • Torchio, Raffaella
  • Mathon, Olivier
  • Subías, Gloria
The samples were characterized by X-ray powder diffraction (XRD) using a Rigaku D-system using Cu Kα1,2 wavelengths and an angular range of 6º ≤ 2θ ≤ 135º at room temperature. Neutron powder diffraction (NPD) measurements were performed at the high-flux reactor of the ILL (Grenoble, France) using the high-intensity powder diffractometer D1B with a detector angular range coverage 5º ≤ 2θ ≤ 128º. A wavelength of λ ≈ 2.52Å was used in a temperature range between 2 K and 150 K. Magnetic measurements were carried out between 5 and 400 K by using a commercial superconducting quantum interference device (SQUID) magnetometer from Quantum Design. The measurements were performed warming the sample after zero-field cooling at an external magnetic field of 1 kOe. Isothermal magnetization measurements at selected temperatures between 5 and 250 K were performed for externals fields between -50 and 50 kOe. Mn-L2,3 (630−670 eV) edge X-ray absorption spectroscopy (XAS) measurements were performed at the at the HECTOR cryomagnet end station in the BL29 BOREAS beamline of the ALBA synchrotron radiation facility (Barcelona, Spain). The photon flux was about 10^12 ph/s with an energy resolution of ∼50 meV. Sintered pellets were used for the XAS measurements, which were also cleaved in situ under ultrahigh vacuum conditions (∼10^−9 mbar) to obtain clean sample surfaces. Measurements were recorded in total electron yield mode (i.e. drain current detection) at 300 K. Mn K-edge XAS measurements at room temperature were performed at the BM23 beamline at the ESRF (Grenoble, France). The spectra were collected in fluorescence mode geometry by using a multi-element silicon drift detector. A Mn foil was measured for energy calibration., We here explore a route to induce a ferromagnetic ground state on the Ruddlesden-Popper phases Sr3-xLaxSn2-xMnxO7 replacing Sn by Mn up to x=1.25. Ferroelectric-paraelectric transitions above room temperature are found in the low Mn-content samples (x≤0.1), with polar space group A21am. For higher Mn concentrations (x ≥ 0.25) the samples are paraelectric and adopt the centrosymmetric space group Amam due to the suppression of specific rotational modes. X-ray absorption spectroscopy confirmed the presence of a Mn3+ ion in all samples though it is not Jahn-Teller distorted. An average regular MnO6 octahedral local structure is reported instead, with Debye-Waller factors for the Mn-O bond length increasing as Mn content does, due to the disorder induced in the Sn/Mn sublattice and the rising of rumpling distortions (expansion of the perovskite bilayer coupled with shrinkage of the rock salt layer). All the Sr3-xLaxSn2-xMnxO7 samples exhibit ferromagnetic correlations. While Mn³⁺ cations in low Mn-content samples (x ≤ 0.25) agree with spin-only contributions, higher doping levels deviate from this interpretation, possibly due to the enhancement of magnetic interactions. At 5 K, all samples exhibit spontaneous magnetization which increases with Mn content, but the Mn³⁺ magnetic sublattice is not fully polarized. Neutron diffraction confirmed the absence of long-range magnetic order and AC susceptibility analysis indicates a glassy magnetic state due to structural disorder and competing interactions. Compared to simple perovskites, our results indicate that the rock salt layer plays a key role in suppressing long-range ferromagnetic order, making it particularly challenging to achieve multiferroic behavior by doping hybrid improper ferroelectrics with magnetic cations., Financial support from PID2021-124734OB-C21 and -C22 together with grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033 and, as appropriate, by “ERDF A way of making Europe”, and Diputación General de Aragón (projects E11-23R and E12-23R). Granted beam time at ILL, via Spanish Initiatives on Neutron Scattering (SpINS),Experiment CRG-2990; doi: 10.5291/ILL-DATA.CRG-2990. Beam time allocation at ALBA (proposal codes 2023027292 and 20250330019) and ESRF (exp blc15406) synchrotrons., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Exploring the magnetic percolation threshold in the improper ferroelectric Sr3Sn2O7 upon Cr and Fe-doping [Dataset]

  • Blasco, Javier
  • Cuartero, Vera
  • Lafuerza, Sara
  • Gracia, David
  • Rodríguez-Velamazán, J. A.
  • Puente-Orench, Inés
  • Subías, Gloria
The samples were characterized by X-ray powder diffraction (XRD) using a Rigaku D-system using Cu Kα1,2 wavelengths. Neutron powder diffraction measurements were performed at the high-flux reactor of the ILL (Grenoble, France) using the high-intensity powder diffractometer D1B with a detector angular range coverage 2º ≤ 2θ ≤ 128º. A wavelength of λ ≈ 2.52Å was used for the determination of the low-temperature magnetic structure in a temperature range between 2 K and 150 K.Magnetic measurements were carried out between 5 and 400 K by using a commercial superconducting quantum interference device (SQUID) magnetometer from Quantum Design. The measurements were performed warming the sample after zero-field cooling at an external magnetic field of 1 kOe. Isothermal magnetization measurements at selected temperatures between 5 and 250 K were performed for externals fields between -50 and 50 kOe. The relative dielectric permittivity was derived from measurements with an impedance analyzer (Wayne Kerr Electronics 6500B), applying sinusoidal excitations of 1 V amplitude at 900 kHz. Temperature dependent measurements were conducted in homemade sample insert in either a tubular furnace (above room temperature) or an Oxford Instruments cryostat (from 120 K up to 400 K), with 1 K/minute heating ramps. The polarization versus electric field (𝑃-𝐸) hysteresis loops were collected at room temperature in silicon oil, using a 500 V-built-in ferroelectric tester (Precision Premier II, Radiant Technologies) jointly with a high voltage amplifier (610E, Trek). Excitation signals with frequency of either 100 or 250 Hz and maximum electric (E) field amplitude of 125 kV/cm were applied., We examine the effect of Fe and Cr substitutions at the Sn site on the magnetic properties of the hybrid improper ferroelectric Sr3Sn2O7. Upon co-doping with La to preserve the electric charge balance in the unit cell, the Sr3-xLaxSn2-xCrxO7, Sr3-xLaxSn2-xFexO7 and Sr2LaSnFe1-yCryO7 series can be obtained as single phases up to x=1 and for all y values. The unit cell volume is isotropically reduced with doping, so that the orthorhombic structure is preserved. However, these substitutions strongly destabilize the ferroelectric order by decreasing the transition temperature, Tc, below room temperature for x≥0.25. La/Cr co-doping is unable to induce long-range magnetic and compositions from this series behave as conventional paramagnetic compounds; although for high doping concentration (x≥0.5), the significant deviations from the Curie law at low temperatures suggest the onset of antiferromagnetic correlations. In the case of La/Fe co-doping, all samples show strong antiferromagnetic correlations, but a spin glass-like behavior is observed for x≈1 compounds. Finally, no long-range magnetic ordering is observed in La/Cr-Fe co-doped samples. but at the same time an increase in spontaneous magnetization is seen at low temperature, which is associated with the presence of competitive magnetic interactions, in particular the Fe-O-Cr superexchange ferromagnetic interaction. The lack of long-range magnetic order in the investigated series of Cr/Fe-doped Sr3Sn2O7, indicates that the critical concentration of magnetic atoms necessary to overcome the magnetic percolation threshold exceeds the 50% in magnetic cations in these bilayered Ruddlesden-Popper perovskites., Financial support from MICIU/AEI/10.13039/501100011033/FEDER, UE (PID2021-124734OB-C21, CEX2023-001286-S) and Diputación General de Aragón (E11-23R, E12-23R). Granted beam time at ILL, via Spanish Initiatives on Neutron Scattering (SpINS),Experiment CRG-2990; doi:10.5291/ILL-DATA.CRG-2990., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Reversible low-pressure barocaloric effect from mixed‑phase stabilization in a hybrid cadmium perovskite [Dataset]

  • Charkiolakis, Emmanouil K.
  • Gracia, David
  • Blasco, Javier
  • Cuartero, Vera
  • Popescu, Catalin
  • Liu, Xiaojiao
  • Subías, Gloria
  • Evangelisti, Marco
[Sample preparation and characterization] The layered hybrid organic–inorganic perovskite (C9H19NH3)2CdCl4 (C9CdCl) was synthesized following the procedure described in the associated manuscript. Phase purity was verified by powder X-ray diffraction (PXRD)., [Adiabatic calorimetry] Heat-capacity measurements were performed using an AK-6-25 adiabatic calorimeter (AOZT Termis). Measurements were carried out over the temperature range encompassing the structural phase transitions. The transition entropy and enthalpy changes were determined from the temperature dependence of the heat capacity., [Differential scanning calorimetry] Differential scanning calorimetry (DSC) measurements were conducted using a TA Instruments DSC Q2000 calorimeter equipped with a Refrigerated Cooling System (RCS90) and a standard DSC cell. Approximately 4 mg of sample was sealed in Tzero Aluminum Hermetic pans and measured under a continuous nitrogen flow. Heat-capacity measurements were calibrated using sapphire standards. Additional DSC experiments were performed at different heating and cooling rates to evaluate the kinetic dependence of the phase transitions., [Powder X-ray diffraction] Laboratory PXRD measurements were carried out using a Rigaku D-Max diffractometer with Cu Kα₁,₂ radiation over the 2θ range 2.5–50°. Temperature-dependent PXRD data were collected using a Rigaku variable-temperature stage, allowing in situ measurements between 93 and 573 K., [Synchrotron X-ray powder diffraction] High-resolution synchrotron X-ray powder diffraction (SXRPD) measurements were performed at the MSPD beamline of the ALBA Synchrotron (Spain) and at beamline I15 of Diamond Light Source (United Kingdom). Temperature-dependent and pressure-dependent diffraction patterns were collected to investigate the structural evolution across the phase transitions. At Diamond Light Source, high-pressure diffraction experiments were performed using a high-pressure jump cell enabling continuous pressure variation up to approximately 3.5 kbar. Powder samples were loaded into sealed Kapton capillaries, while pressure was transmitted hydrostatically through deionized water surrounding the capillary. Both isothermal and isobaric diffraction measurements were carried out over the ranges 278–330 K and 0.4–2.0 kbar., [High-pressure calorimetry] Barocaloric measurements were performed using a custom-built high-pressure calorimetric setup incorporating a calorimeter within a Be–Cu pressure cell. A surface-mount resistor served simultaneously as sample holder and temperature sensor, while Daphne 7373 oil was employed as the hydrostatic pressure-transmitting medium. Measurements were conducted in an Oxford Instruments OptistatDN cryostat operating between 77 and 400 K., Pressure‑driven phase transitions provide a means to modulate entropy in solids, although achieving large and reversible caloric responses remains a central challenge. The layered hybrid organic-inorganic perovskite (C9H19NH3)2CdCl4 exhibits two first-order transitions near room temperature that underpin its barocaloric response. High‑pressure calorimetry combined with synchrotron X‑ray diffraction shows that compression stabilizes a mixed‑phase region over a wide pressure-temperature range rather than inducing a complete transformation. Consequently, the effective entropy change decreases with pressure, while a substantial reversible contribution is preserved, yielding reversible entropy and temperature changes of ΔSᵣₑᵥ ≈ 136 J kg⁻1 K⁻1 and ΔTᵣₑᵥ ≈ 17 K for a pressure change of 0.8 kbar. This leads to a refrigerant capacity exceeding 4 kJ kg⁻1 with a favorable coefficient of performance in the low-pressure regime. Notably, the large reversible temperature changes achieved at comparatively low pressures and close to room temperature highlight the potential of this material for solid-state cooling. Overall, these results demonstrate that high caloric performance can be achieved without complete phase transformation, reflecting a trade-off between entropy change and reversibility in soft hybrid lattices., This work was supported by Spanish MICIU/AEI/10.13039/501100011033/ and ERDF/EU (PID2024-159457OB-C21, CEX2023-001286-S). This work was carried out with the support of Diamond Light Source, instrument I15 (proposal CY40151) and ALBA Synchrotron, MSPD beamline (proposal 2024098680). E.K.C. acknowledges financial support from MICIU through a doctoral fellowship (PRE2022-103760). The authors acknowledge the Servicio General de Apoyo a la Investigación from Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Reactivity of Mg-stabilised zirconia porous support towards molten alkaline carbonates [Dataset]

  • Merino, R. I.
  • Sanjuán, M. L.
  • Oliete, Patricia B.
  • Peña, J. I.
  • Safarzadeh Khosrowshahi, Mobin
The present dataset compiles the source data generated for the investigation of the evolution of microstructure and phases of MgO stabilized zirconia with aligned micron sized pores, produced by directional solidification followed by acid etching, after being contacted to Li-Na-K molten eutectic carbonate mixture at temperatures from 600 to 800 °C in CO2-lean gas streams (room air), in order to elucidate failure origins. This research is relevant as the ceramic has been previously identified as a candidate support for dual ceramic - molten carbonate CO2 separation membranes. The analysis of the present dataset and additional data is part of a research work intended for publication elsewhere., - PID2021-124863OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 - CEX2023-001286-S funded by MCIN/AEI/ 10.13039/501100011033 - PRE2022-102008 funded by MCIN/AEI/ 10.13039/501100011033 and FSE+ - Financial support to the Research Group T02_23R by the Departamento de Ciencia, Universidad y Sociedad del Conocimiento del Gobierno de Aragón., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., No