Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 524
Encontrada(s) 6 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Strain Relief and Domain Architecture in Epitaxial NiO Films on La2/3Sr1/3MnO3/SrTiO3 for Spin-Transport Engineering

  • Chen, Shoulong
  • Frontera, Carlos|||0000-0002-0091-4756
  • Toda-Casaban, Meritxell
  • Pomar, Alberto|||0000-0002-5855-2356
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Konstantinovic, Zorica|||0000-0002-6871-7038
  • Magen Dominguez, Cesar|||0000-0002-6761-6171
  • Martínez, Benjamín|||0000-0001-9879-7748
  • Mestres i Andreu, Narcís|||0000-0001-6468-4227
This study reports on the epitaxial growth and structural characterization of ultrathin NiO-films deposited by magnetron sputtering on LaSrMnO (LSMO) films grown on SrTiO (STO) substrates with (001)- and (111)-orientations. X-ray diffraction and atomic-force microscopy show that all NiO layers are single-phase, face-centered pseudo-cubic, atomically smooth, root-main-square (RMS) surface roughness <0.15 nm, and form abrupt interfaces with LSMO. High-resolution reciprocal-space maps reveal that the films are largely relaxed, but exhibit a slight compressive distortion, yielding unit-cell volumes larger than bulk NiO. Despite a nominal ≈7% lattice mismatch, aberration-corrected scanning transmission electron microscopy uncovers an array of misfit dislocations at the NiO/LSMO interface that help to accommodate strain allowing epitaxial growth of NiO layers. On (001)-oriented samples, the four antiferromagnetic T-domains are oblique to the sample plane, while on the (111) case, one lies in-plane. This in-plane domain shows greater spacing between ferromagnetic (111) planes due to unit cell distortion. This structural domain splitting can influence magnetic order and spin transmission efficiency, highlighting crystallographic orientation as a key factor in designing high-performance spintronic devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Towards scalable high-performance molecular electronics devices based on diketopyrrolopyrrole derivatives

  • Bonastre, José María
  • Giglio, Maria Elisabetta
  • Mas-Torrent, Marta|||0000-0002-1586-005X
  • Davidson, Ross J.
  • Beeby, Andrew|||0000-0002-2134-4668
  • Cea, Pilar|||0000-0002-4729-9578
  • Crivillers, Núria|||0000-0001-6538-2482
  • Martin, Santiago|||0000-0001-9193-3874
Large-area molecular junctions offer a promising pathway toward the scalable implementation of molecular electronic devices, where charge transport is strongly governed by molecular structure and supramolecular organization. In this work, two diketopyrrolopyrrole (DPP) derivatives featuring tailored alkyl chain lengths designed to isolate the DPP moiety from the anchor groups, are used to form well-ordered Langmuir–Blodgett (LB) films. By bridging the gap between single-molecule behavior and collective transport in large-area devices, molecular junctions were first characterized using the ‘scanning tunneling microscopy (STM) touch-to-contact’ method. These junctions exhibit higher conductance than conventional single molecule I(s) measurements, attributed to intermolecular charge-transfer processes enabled by the ordered LB assemblies. Consistent with this enhanced conductance, low transition voltages (Vtrans) indicate favorable alignment between the metal electrode Fermi level and the frontier molecular orbitals. To assess device-relevant performance, large-area molecular junctions were fabricated using Eutectic Gallium–Indium (EGaIn) alloy as a soft top electrode. These junctions exhibit high yield and reproducibility, confirming the formation of robust and high-quality junctions that mirror the transport behavior observed at the single-molecule scale. Together, these results establish a consistent transport picture across both small- and large-area junctions identifying the DPP moiety as a highly effective molecular wire. This effectiveness stems from the capability of these DPP derivatives to form well-ordered films exhibiting intermolecular charge-transfer processes, which, combined with a favorable energy-level alignment with the electrodes, ultimately results in high device conductance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ligand decorated nickel-based nanoparticles supported onto MXenes in catalytic hydrogenation of N-heterocycles

  • Medina-Vargas, Judith
  • Martin, Santiago
  • Sorribes-Terrés, Iván
  • Mata, Jose A.
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The development of efficient first-row transition metal catalysts is essential for advancing sustainable chemical processes. In this study, we report the synthesis of nickel-based nanoparticles (NiNPs) functionalized with N-heterocyclic carbene ligands and immobilized onto Ti3C2 MXene. Our convergent synthetic approach enables comprehensive and straightforward characterization of each component within the final hybrid material. The NiNPs are obtained through chemical reduction of a well-defined nickel organometallic complex, resulting in the formation of small nickel metal nanoparticles (3.0 +/- 0.8 nm) that are rapidly oxidized to the corresponding NiO and Ni(OH)2 based nanoparticles containing surface NHC ligands. The hybrid catalyst exhibits high activity and selectivity in the hydrogenation of N-heterocycles under hydrogenation conditions, achieving quantitative yields at low catalyst loadings, particularly notable for a nickel-based system. Recycling studies revealed progressive catalyst deactivation, primarily due to sintering of NiNPs, which reduces the number of active surface sites. However, the catalytic activity can be fully restored through a mild regeneration treatment under reducing conditions. These findings underscore the potential of NiNP/MXene-based materials for selective hydrogenation reactions, and highlight the importance of addressing key challenges in sustainability such as the use of non-noble metals, catalyst stability and recyclability. Further design modifications aimed at preventing nanoparticle sintering may enhance the long-term viability of these systems in catalytic hydrogenation processes., Thanks to the Spanish Ministry of Science and Innovation for financial support through the projects PID2021-126071OB-C21, PID2021-126071OB-C22 and CEX2023-001286-S, funded by MICIN/AEI/10.13039/501100011033/FEDER "Una manera de hacer Europa". Generalitat Valenciana (MFA/2022/043) with funding from European Union NextGenerationEU and Universitat Jaume I (UJI-B2022-23 and GACUJIMB/2023/13) is also gratefully acknowledged. I. S. thanks the Grant CNS2022-136183 funded by MICIU/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR", and the Grant PID2022-143164OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by "ERDF/EU". I.S. also gratefully acknowledges the program ESGENT from Generalitat valenciana (CIESGT/2024/16). J. M.-V. thanks the program "Santiago Grisolia" (GrisoliaP2021/114). The authors thank 'Servei Central d'Instrumentacio Cientifica (SCIC) de la Universitat Jaume I '. S. M. is grateful to Gobierno de Aragon for the grant E31_23R with European Social Funds (Construyendo Europa desde Aragon).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hydrophobic MFI-Type Zeolites via Alkali-Cation-Induced Defect Healing: Implications for Adsorbent and Catalyst Design

  • Christos
  • Ferri-Vicedo, Pau
  • Escobar-Bedia, Francisco Javier
  • Vidal Moya, José Alejandro
  • Palomino Roca, Miguel|||0000-0003-2983-1038
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Serna Merino, Pedro Manuel
  • Boronat Zaragoza, Mercedes|||0000-0002-6211-5888
  • Martínez, Cristina|||0000-0002-4415-084X
  • Moliner Marin, Manuel|||0000-0002-5440-716X
  • Mayoral, Alvaro
  • Kendra, Richard
  • Lei, Chen
  • Grajciar, Lukas
  • Heard, Christopher James
[EN] Here, we demonstrate that sub-stoichiometric amounts of alkali cations (Na+ and K+) critically govern defect formation during the synthesis of Silicalite-1 (MFI), enabling precise control over framework integrity and surface properties after calcination. Combining systematic synthesis studies with density functional theory (DFT) calculations and high-resolution microscopy, we reveal a defect-healing mechanism in which in situ generated NaOH or KOH species promote Si-O-Si bond rearrangement and enhance the mobility of Si(OH)4 units. This process facilitates the effective healing of T-site vacancies, yielding highly ordered, defect-free MFI frameworks. The resulting Silicalite-1 exhibits markedly enhanced hydrophobicity and superior selectivity in butanol/water separation, underscoring the decisive role of defect control in modulating adsorption and interfacial properties. Importantly, these insights are successfully extended to the synthesis of defect-free TS-1, affording highly hydrophobic Lewis acid catalysts with improved activity and selectivity in the epoxidation of 1-hexene. This environmentally friendly, straightforward, scalable approach offers a versatile pathway to produce defect-free zeolites with precisely tuned physicochemical properties, enabling the development of advanced catalytic and separation materials, especially for applications involving water or polar compounds., The authors acknowledge financial support by the Spanish Government through PID2024-158871OB-I00, PID2022-136934OB-I00, PID2022138481N-BI00, CNS2023-144346 (funded by MCIN/AEI/10.13039/501100011033), and by the Generalitat Valenciana through the Prometeo Program (CIPROM/2023/34 and CIPROM/2024/050). The authors are also thankful for the Severo Ochoa financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S and CEX2023-001286-S (funded by MCIN/AEI/10.13039/501100011033). CK acknowledges the Spanish Government for a FPI scholarship (PRE2022-103661). PF acknowledges that the project that has generated these results has been supported by a grant from the "la Caixa" Banking Foundation (ID 100010434), whose code is LCF/BQ/PR26/12130021. LG, CJH, CL and RK acknowledge the support of Czech Science Foundation (26-23277S) and Charles University Centre of Advanced Materials (CUCAM, OP VVV Excellent Research Teams, project number \\CZ.02.1.01/0.0/0.0/15_003/0000417). The Electron Microscopy Service of the UPV is also acknowledged for their help in sample characterization. The computations were performed on the Tirant IV cluster of the Servei d'Informatica of the University of Valencia. AM acknowledges support by Gobierno the Aragon (Nanomidas group, code E13_23R). Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS node "Laboratorio de Microscopias Avanzadas" at the University of Zaragoza. The computations at Charles University were supported by the Ministry of Education, Youth and Sports of the Czech Republic through the e-INFRA CZ (ID:90254).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transformer wave function for quantum long-range models

  • Roca-Jerat, Sebastián
  • Gallego, Manuel
  • Luis, Fernando
  • Carrete, Jesús
  • Zueco, David
We employ a neural-network architecture based on the vision transformer (ViT) architecture to find the ground states of quantum long-range models, specifically the transverse-field Ising model for spin-1/2 chains across different interaction regimes. Harnessing the transformer's capacity to capture long-range correlations, we compute the full phase diagram and critical properties of the model in both the ferromagnetic and antiferromagnetic cases. Our findings show that the ViT maintains high accuracy across the full phase diagram. We compare these results with previous numerical studies in the literature and, in particular, show that the ViT has a superior performance than a restricted-Boltzmann-machine-like ansatz., The authors acknowledge funding through Grant No. CEX2023-001286-S, from MCIN/AEI/10.13039/ 501100011033 and the EU NextGenerationEU/PRTR, and No. TED2021-131447B-C21, from MCIN/AEI/10.13039/ 501100011033. This study was also supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) promoted by the Government of Aragon. We also acknowledge the Gobierno de Aragón (Grant No. E09-17R Q-MAD), Quantum Spain and the CSIC Quantum Technologies Platform PTI-001. This research project was made possible through the access granted by the Galician Supercomputing Center (CESGA) to its supercomputing infrastructure. The supercomputer FinisTerrae III and its permanent data storage system have been funded by the Spanish Ministry of Science and Innovation, the Galician Government and the European Regional Development Fund (ERDF). S.R.-J. acknowledges financial support from Gobierno de Aragón through a doctoral fellowship., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

[Dataset] Source data for the article entitled "Antitumor activity of bimetallic silver/gold nanoparticles against MCF-7 breast cancer cells"

  • García-García , M. Paula
  • Ortega-Pérez, A. Valeria
  • Martínez-Sanmiguel, J. José
  • Martínez Orellana, Lidia
  • Huttel, Yves
[EN] Data collection from the UV-vis spectra and corresponding plot, powder X-ray diffraction data, data collection of cell viability, values of Z-potential and data collection of XPS core level analysis of Ag 3d; Au 4f; C 1s and O 1s with fittings and plots., Programa Bilateral CSIC-TEC Monterrey (ref. BILTC22001); Spanish Ministry of Science and Innovation to grant PID2021-126524NB-100 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe. BILTC22001; PID2021-126524NB-100 SCALAR; RYC2018-024561-I; CEX2023-001286-S, Au_AgNPs UV-Vis.mppz Au_Ag DRX magic plot.mppz Cell viability.xlsx potencial z.xlsx XPS.pxp, No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct evidence of induced magnetic moment in Se and the role of misplaced Mn in MnBi2⁢Se4-based intrinsic magnetic topological insulator heterostructures

  • Fukushima, R.
  • Antonov, V. N.
  • Otrokov, Mikhail M.
  • Sasaki, T. T.
  • Akiyama, Ryota
  • Sumida, Kazuki
  • Ishihara, K.
  • Ichinokura, S.
  • Tanaka, Kiyohisa
  • Takeda, Y.
  • Salinas, D. P.
  • Eremeev, Sergey V.
  • Chulkov, Eugene V.
  • Ernst, Arthur
  • Hirahara, Toru
Intrinsic magnetic topological insulators, in which magnetism and topology are inherently combined, are excellent systems to realize exotic phenomena such as the quantum anomalous Hall effect. However, there are many reports that show that the experimental samples are not so ideal and the effect of the unintentional disorder in these systems needs to be considered carefully. In this study, we investigate the role of misplaced magnetic atoms as well as nonmagnetic elements in the intrinsic magnetic topological insulator heterostructures based on MnBi2⁢Se4 and Bi2⁢Se3. We find that Mn atoms are not only placed at the central layer of the MnBi2⁢Se4 septuple layer (SL) but also intermix with Bi (antisite Mn) as well as reside in the van der Waals (vdW) gap. Through a detailed comparison between the experimental and theoretical x-ray magnetic circular dichroism (XMCD) spectra, we find that the antisite Mn is coupled ferromagnetically, whereas the vdW Mn couple antiferromagnetically to the Mn in the central atomic plane of the SL. Furthermore, we detect a clear XMCD signal in nonmagnetic Se, providing unambiguous evidence of its magnetic interaction with Mn., T.H. acknowledges the support by Grants-In-Aid from Japan Society for the Promotion of Science (Grants No. 18H03877 and No. 22H00293), the Murata Science Foundation (Grant No. H30-084), the Asahi Glass Foundation, the Iketani Science and Technology Foundation (Grant No. 0321083-A), and Support for Tokyo Tech Advanced Researchers. M.M.O. acknowledges the support by MCIN/AEI/10.13039/501100011033/ (Grant No. PID2022-138210NB-I00) and “ERDF A way of making Europe,” by Ayuda CEX2023-001286-S financiada por MICIU/AEI/10.13039/501100011033, as well as MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) promoted by the Government of Aragon. S.V.E. acknowledges support from the Government research assignment for ISPMS SB RAS, project FWRW-2022-0001. E.V.C. acknowledges Saint-Petersburg State University for research Project 95442847. The ARPES measurements were performed under the UVSOR Proposals No. 21-681, No. 21-867, No. 22IMS6661, and No. 22IMS6856. The XMCD measurements were performed at JAEA beamline BL-23SU in SPring-8 (Proposals No. 2020A3843, No. 2021A3843, and No. 2021B3843) and BL-29 BOREAS in ALBA (Proposal No. 2023027296). The work at SPring-8 was performed under the Shared Use Program of JAEA Facilities (Proposals No. 2020A-E16, No. 2021A-E19, and No. 2021B-E16) with the approval of Nanotechnology Platform project supported by the Ministry of Education, Culture, Sports, Science and Technology (Proposals No. JPMXP09A20AE0016, No. JPMXP09A21AE0017, and No. JPMXP09A21AE0036)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Light-induced magnetic switching in a coumarin-based Tb single molecule magnet

  • Bartolomé, Elena
  • Arauzo, Ana B.
  • Luzón, Javier
  • Gasque, Laura
We present the intriguing magneto-optical properties of the lanthanide complex [Tb(coum)3(batho)]·[0.7EtOH], named Tb-batho, based on coum = 3-acetyl-4-hydroxylato-coumarin and batho = bathophenanthroline ligands. Tb-batho displays visible-range luminescence with a notable quantum yield (58%) upon sensitization of the “antenna” ligands. Employing a SQUID magnetometer equipped with a magneto-optic option, we conducted comprehensive in situ measurements of light-induced magnetization changes across varied magnetic fields, temperatures, and frequencies, utilizing light wavelengths ranging from 275 to 800 nm. A reversible magnetic modulation of magnetization is observed upon toggling the light “on” and “off,” particularly pronounced at 380 nm excitation, resulting in a magnetization change ΔM(off/on) = 0.376μB fu−1 (ca. 42.6% of the magnetization) at 1.8 K and 1 kOe. Although Tb-batho exhibits field-induced single ion magnet (SIM) behavior, characterized by a thermally-activated process with an activation energy of Ueff/kB = 16.6 K @ 3 kOe and a slow direct process influenced by bottleneck effects, light irradiation does not noticeably alter its dynamic properties. All in all, Tb-batho emerges as a versatile multifunctional molecular material integrating SIM behavior, luminescence and light-induced magnetic switching, holding interest for diverse electronic applications, sensors, or quantum computing., This work was financially supported by the Spanish “Ministerio de Ciencia, Innovacion y Universidades” (PID2022-138492NB-I00), the Gobierno de Aragón (RASMIA E12-23R), the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S and CEX2023-001286-S), and Mexican PAPIIT program (IN219321). Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ubiquitous order-disorder transition in the Mn antisite sublattice of the (MnBi2Te4)(Bi2Te3)n magnetic topological insulators

  • Sahoo, Manaswini
  • Onuorah, Ifeanyi John
  • Folkers, Laura Christina
  • Kochetkova, Ekaterina
  • Chulkov, Eugene V.
  • Otrokov, Mikhail M.
  • Aliev, Ziya S.
  • Amiraslanov, Imamaddin R.
  • Wolter, A. U. B.
  • Büchner, Bernd
  • Corredor Bohorquez, Laura Teresa
  • Wang, Chennan
  • Salman, Zaher
  • Isaeva, Anna
  • De Renzi, Roberto
  • Allodi, Giuseppe
Magnetic topological insulators (TIs) herald a wealth of applications in spin-based technologies, relying on the novel quantum phenomena provided by their topological properties. Particularly promising is the (MnBi2Te4)(Bi2Te3)n layered family of established intrinsic magnetic TIs that can flexibly realize various magnetic orders and topological states. High tunability of this material platform is enabled by manganese–pnictogen intermixing, whose amounts and distribution patterns are controlled by synthetic conditions. Here, nuclear magnetic resonance and muon spin spectroscopy, sensitive local probe techniques, are employed to scrutinize the impact of the intermixing on the magnetic properties of (MnBi2Te4)(Bi2Te3)n and MnSb2Te4. The measurements not only confirm the opposite alignment between the Mn magnetic moments on native sites and antisites in the ground state of MnSb2Te4, but for the first time directly show the same alignment in (MnBi2Te4)(Bi2Te3)n with n = 0, 1 and 2. Moreover, for all compounds, the static magnetic moment of the Mn antisite sublattice is found to disappear well below the intrinsic magnetic transition temperature, leaving a homogeneous magnetic structure undisturbed by the intermixing. The findings provide a microscopic understanding of the crucial role played by Mn–Bi intermixing in (MnBi2Te4)(Bi2Te3)n and offer pathways to optimizing the magnetic gap in its surface states., This work was supported by the Deutsche Forschungsgemeinschaft (DFG) within the Würzburg-Dresden Cluster of Excellence on Complexity and Topology in Quantum Matter – ct.qmat (EXC 2147, project-id 390858490) and the SFB 1143 (project-id 247310070). I.J.O. and R.D.R. acknowledged financInformationial support from PNRR MUR project ECS-00000033-ECOSISTER and also acknowledged computing resources provided by the STFC scientific computing department's SCARF cluster and CINECA under ISCRA Project ID IsCa4. Z.S. acknowledged support by the Swiss National Science Foundation (SNF-Grant No. 200021_165910). L.T.C. was funded by the DFG (project-id 456950766). The cost of the HyReSpect equipment used for this investigation was partly supported by the University of Parma through the Scientific Instrumentation Upgrade Program 2020. This work was partially based on experiments performed at the Swiss MuonInformation Source (SµS), Paul Scherrer Institute, Villigen, Switzerland. M.M.O. acknowledged the support by MCIN/ AEI /10.13039/ 501100011033/ (Grant PID2022-138210NB-I00) and “ERDF A way of making Europe”, MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) promoted by the Government of Aragon as well as Ayuda CEX2023-001286-S financiada por MICIU/AEI/10.13039/501100011033. E.V.C. acknowledges Saint-Petersburg State University for a research project 95442847., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adhesion of catechol-functionalized linear-dendritic block copolymers: Dendritic effect, self-assembly, and bioadhesion

  • Lancelot, Alexandre
  • Meger, Mitchell E.
  • Guerreiro Gómez, Enrique
  • Sierra, Teresa
  • Wilker, Jonathan J.
Inspired by mussels protein adhesives, two series of catechol-functionalized Linear-Dendritic Block Copolymer (LDBC) adhesives are synthesized. They show lap shear adhesion strength as high as 7 MPa on aluminum substrates and adhesion up to 3 kPa on porcine skin. These water-soluble LDBCs are composed of i) either poly(ethylene glycol) (PEG) or poly(ethylene glycol)-poly(propylene glycol)-poly(ethylene glycol) triblock copolymer (Pluronic F-127) as linear polymers, ii) Bis-MPA dendrons of generation 0, 1, and 2 as dendritic parts, and iii) 2, 4, or 8 terminal catechol moieties. A LDBCs generation comparative test on aluminum reveals a clear dendritic effect: the LDBCs of second generation display higher adhesion than the LDBCs of first generation that also display higher adhesion than the LDBCs of generation 0 for both series, assessing thus a positive dendritic effect in adhesion. Second, a comparative study is carried out between the LDBCs based on PEG and the ones based on Pluronic. The ability of the Pluronic LDBCs to self-assemble in water appears to reduce adhesion when applied on aluminum whereas it is essential to obtain adhesion on porcine skin, thanks to the formation of hydrogels, as observed by the vial inversion technique and electron microscopy., The authors appreciate the support for this project provided by the European Commission through the Marie Skłodowska-Curie Actions (MSCA) fundings – Horizon Europe, Grant no. 101062504 – DAHAD project. The authors thank the Office of Naval Research (Award N00014-19-1-2342). This work was financially supported by the Spanish projects PID2021-126132NB-I00, financed by MCIU/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, and CEX2023-001286-S, financed by MCIU/AEI/10.13039/501100011033/, and the Gobierno de Aragón-FEDER (E47_23R-research group). The authors would like to acknowledge the Laboratorio de Microscopias Avanzadas-LMA (Instituto de Nanociencia y Materiales de Aragón-Universidad de Zaragoza)., We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrids of deep HOMO organic cyanoacrylic acid dyes and graphene nanomaterials for water splitting photoanodes

  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Orduna, Jesús
  • Villacampa, Belén
  • Blesa, María Jesús
4 figures, 1 tables.-- This research made use of Marvin, a core Python package and web framework for MaNGA data, developed by Brian Cherinka, José Sánchez-Gallego, Brett Andrews, and Joel Brownstein. (MaNGA Collaboration, 2018)., Dye-sensitization is a promising strategy to improve the light absorption and photoactivity abilities of wide-bandgap semiconductors, like TiO2. For effective water-splitting photoanodes with no sacrificial agents, the electrochemical potential of the dye must exceed the thermodynamic threshold needed for the oxygen evolution reaction. This study investigates two promising organic cyanoacrylic dyes, designed to meet that criterion by means of theoretical calculations. Both yellow-colored dyes were synthesized and characterized by optical and photoelectrochemical techniques, demonstrating strong light absorption in the visible region, suitable experimental reduction potentials, and adsorption from the organic solvent onto mesoporous TiO2 layers. In addition, to promote immobilization in aqueous electrolytes, the dyes were hybridized with graphene oxide or multi-walled carbon nanotubes. Photoelectrochemical analysis of the dye-sensitized photoelectrodes demonstrated efficient charge transfer from the dyes to the TiO2 photoanode under simulated solar light. While the starting photocurrent notably surpassed the blank TiO2, a subsequent decay points to kinetic obstacles that still need to be overcome., Support from Spanish MCIN/AEI/10.13039/501100011033 and MICIU/AEI /10.13039/501100011033 and “ERDF A Way of making Europe” under project grant PID2022-139671OB-I00 and CEX2023-001286-S, as well as from the Gobierno de Aragón (DGA, T03_23R and E47-23R) and Universidad de Zaragoza (UZ2023-CIE-01)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary materials for Hybrids of deep HOMO organic cyanoacrylic acid dyes and graphene nanomaterials for water splitting photoanodes [Dataset]

  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Orduna, Jesús
  • Villacampa, Belén
  • Blesa, María Jesús
Under a Creative Commons license BY 4.0., S1. Experimental methods of molecular characterization S2. Synthesis of compound ALD Scheme S1. Synthesis of aldehyde ALD S3. Structural characterization Figure S1. 1H‐NMR spectrum of compound ALD (400 MHz, CDCl3). Figure S2. 13C‐NMR (APT) spectrum of compound ALD (100 MHz, CDCl3). Figure S3. FTIR spectrum of compound ALD. Figure S4. HRMS (ESI+) of compound ALD. Figure S5. 1H‐NMR spectrum of compound ASIL-CNCOOH (400 MHz, CDCl3). Figure S6. 13C‐NMR spectrum of compound ASIL-CNCOOH (100 MHz, CDCl3). Figure S7. FTIR spectrum of compound ASIL-CNCOOH. S3. Optical characterization Figure S8. UV-vis absorption spectra of ASIL-CNCOOH and TT-CNCOOH in DCM Figure S9. Concentration dependence of ASIL-CNCOOH dye. UV-vis Absorption spectra in DCM. Figure S10. Concentration dependence of TTCNCOOH dye. UV-vis Absorption spectra in DCM. S4. Electrochemical characterization Figure S11. Differential pulse Voltamogramms: (a) TT-CNCOOH; (b) ASIL-CNCOOH., 1. Experimental methods of molecular characterization Melting points were obtained on a Gallenkamp apparatus in open capillaries and are uncorrected. 1H and 13C-NMR spectra were recorded on a Bruker AV400 at 400 MHz and 100 MHz respectively; δ values are given in ppm (relative to TMS) and J values in Hz. The apparent resonance multiplicity is described as s (singlet), br s (broad singlet), d (doublet), t (triplet), q (quartet) and m (multiplet). 1H-1H COSY and 1H-13C-HSQC experiments were recorded in order to establish peaks assignment. Electrospray mass spectra were recorded on a Bruker MicroToF-Q spectrometer and on a Bruker TIMS-TOF; accurate mass measurements were achieved using sodium formate as external reference. UV-Visible spectroscopy of dye molecules in dichloromethane (DCM) was performed with an UVvis Cary 6000. Differential Pulse Voltammetry (DPV) measurements were performed with a μ-Autolab ECOChemie potenciostat, using a glassy carbon working electrode, Pt counter electrode, and Ag/AgCl reference electrode. The experiments were carried out under argon, in DCM with Bu4NPF6 as the supporting electrolyte (0.1mol L-1). Scan rate was 100 mV s-1., Scheme S1. Synthesis of aldehyde ALD 4-({2-[(tert-butyldimethylsilyl)oxy]ethyl}(methyl)amino)benzaldehyde, ALD At 0°C, 0.25 g (3.75 mmol) of imidazole and 0.56 g (3.75 mmol) of tert-butyldimethylsilyl chloride was dissolved in 5 ml of dry N,N-dimethylformamide (DMF) under argon atmosphere. Next, 0.44 g (2.50 mmol) of 4-((2-hydroxyethyl)(methyl)amino)benzaldehyde was dissolved in DMF and introduced into the former solution. The reaction was maintained for 24 h at room temperature. The DMF was evaporated under reduced pressure, an oil being obtained. It was rinsed with ethyl acetate (3x60 mL). The organic phase was washed with NaCl (3x60mL) and a saturated NH4Cl solution (3x60mL). Finally, the crude was dried with MgSO4, filtered and the solvent was removed. It was purified using column chromatography with hexane/AcOEt (80/20) eluent. Finally, 0.62 g of an orange oil (ALD) was obtained (Yield: 85%). Molecular weight: 293.05 g/mol. FTIR (KBr) cm-1: 1683 (C=O), 1114 (Si-H). 1H-RMN (400 MHz, CDCl3) δ (ppm): 9.73 (s, 1H), 7.72 (d, J= 8.8 Hz, 2H), 6.72 (d, J= 8.8 Hz, 2H), 3.80 (t, J= 5.8 Hz, 2H), 3.60 (t, J= 5.8 Hz, 2H), 3.10 (s, 3H), 0.86 (s, 9H), 0.00 (s, 6H). 13C-RMN (100 MHz, CDCl3) δ (ppm): 190.2, 153.6, 132, 125.1, 111, 60.4, 54.5, 39.5, 25.8, 18.2, -5.5. HRMS (ESI+) m/z: calculated [C16H28NO2Si]+: 294.1889 found 294.1883[M+H]+, Support from Spanish MCIN/AEI/10.13039/501100011033 and MICIU/AEI /10.13039/501100011033 and “ERDF A Way of making Europe” under project grant PID2022-139671OB-I00 and CEX2023-001286-S, as well as from the Gobierno de Aragón (DGA, T03_23R and E47-23R) and Universidad de Zaragoza (UZ2023-CIE-01)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antitumor activity of bimetallic silver/gold nanoparticles against MCF-7 breast cancer cells

  • Martínez-Sanmiguel, J. José
  • Zarate-Triviño, Diana
  • García-García , M. Paula
  • García-Martín, José Miguel
  • Mayoral, Álvaro
  • Huttel, Yves
  • Martínez Orellana, Lidia
  • Cholula-Díaz, Jorge L.
Breast cancer poses a global threat with rising incidence and high mortality. Conventional treatments, including chemotherapy, radiation, surgery, and immunotherapy, have side effects, such as resistance issues and adverse effects due to genetic mutations. Meanwhile, noble metal nanoparticles (NPs) synthesized using environmentally friendly methods offer alternative treatments. Bimetallic gold (Au) and silver (Ag) NPs, using natural compounds like starch as stabilizers, enhance biomedical applications, including breast cancer therapies. In this work, the optical properties, stability, and particle size of colloidal bimetallic Ag/Au NPs were analyzed using UV-visible spectroscopy and ζ-potential measurements. The structural properties of the NPs were studied by powder X-ray diffraction (PXRD), while the morphology, chemical composition and particle size were determined using scanning transmission electron microscopy (STEM). The antitumor properties of the Ag/Au NPs were analyzed on human breast cancer cells (MCF-7) using the MTT viability method, reactive oxygen species (ROS) production, and genotoxicity assays. Peripheral blood mononuclear cells (PBMCs) were used as a reference of healthy cells. UV-vis spectroscopy and EDX mapping analysis confirmed the synthesis of bimetallic Ag/Au NPs. Localized surface plasmon resonance (LSPR) absorption bands shifted from 407 nm (Ag) to 524 nm (Au) based on the chemical composition of the NPs. The Ag/Au NPs showed cytocompatibility in PBMCs and a dose-dependent anticancer effect against MCF-7 cancer cells, as well as cell death dependent on ROS production was observed, particularly in NPs with atomic compositions of 50 and 75 at% Ag. This biological activity of the bimetallic NPs was associated with genotoxic damage of 20-24% greater than that observed in the monometallic counterparts. This study demonstrated the synthesis of mono- and bimetallic Ag/Au NPs using a rapid, reproducible and environmentally friendly method, with successful biomedical application against human breast cancer MCF-7 cells., The groups at CSIC and Tecnologico de Monterrey acknowledge the Acciones Bilaterales de Movilidad Conjunta, Modalidad B, program (ref. BILTC22001) for financial support. The group at Tecnologico de Monterrey thanks the School of Engineering and Sciences at Tecnologico de Monterrey for partial funding provided through the Research Chair of Photonics and Quantum Systems and the Department of Science at Tecnologico de Monterrey for access to laboratories and characterization equipment. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS node “Laboratorio de Microscopias Avanzadas” at the University of Zaragoza. Y. H., L. M. and J. M. G.-M. acknowledge the financial support of the Spanish Ministry of Science and Innovation to grant PID2021-126524NB-100 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. AM acknowledges the Spanish Ministry of Science and Innovation (RYC2018-024561-I), the Gobierno the Aragon (Nanomidas group, code E13-23R) and the grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unveiling the Interlayer Interaction in a 1H/1T TaS2 van der Waals Heterostructure

  • Ayani, Cosme G.
  • Bosnar, Mihovil
  • Calleja, Fabián
  • Pinar Solé, Andrés
  • Stetsovych, Oleksandr
  • Ibarburu, Iván M.
  • Rebanal, Clara
  • Garnica, Manuela
  • Miranda, Rodolfo
  • Otrokov, Mikhail M.
  • Ondráček, Martin
  • Jelinek, Pavel
  • Arnau, Andrés
  • Vázquez de Parga, Amadeo L.
This study delves into the intriguing properties of the 1H/1T-TaS2 van der Waals heterostructure, focusing on the transparency of the 1H layer to the charge density wave of the underlying 1T layer. Despite the sizable interlayer separation and metallic nature of the 1H layer, positive bias voltages result in a pronounced superposition of the 1T charge density wave structure on the 1H layer. The conventional explanation relying on tunneling effects proves insufficient. Through a comprehensive investigation combining low-temperature scanning tunneling microscopy, scanning tunneling spectroscopy, non-contact atomic force microscopy, and first-principles calculations, we propose an alternative interpretation. The transparency effect arises from a weak yet substantial electronic coupling between the 1H and 1T layers, challenging prior understanding of the system. Our results highlight the critical role played by interlayer electronic interactions in van der Waals heterostructures to determine the final ground states of the systems., This work has been supported by the Spanish Ministry of Science and Innovation, Grant Nos. PID2021-123776NBC21 (CONPHASETM), PID2019-103910GB-I00, PID2022-138210NB-I00, and PID2021-128011NB-I00 from MICIN/AEI/10.13039/501100011033 “ERDF A way of making Europe”, also through “Severo Ochoa” (Grant CEX2020-001039-S) and “María de Maeztu” (Grant CEX2018-000805-M) Programmes for Centres of Excellence in R&D, respectively. The grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033 is also acknowledged. Additionally, computational resources were provided by the e-INFRA CZ project (ID:90254), supported by the Ministry of Education, Youth and Sports of the Czech Republic. Financial support has also been received by the Comunidad de Madrid (Project S2018/NMT-4511, NMAT2D) and the Basque Government IT-1527-22, as well as MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) promoted by the Government of Aragon. Financial support through the (MAD2D-CM)-MRR MATERIALES AVANZADOS-IMDEA-NC and (MAD2D-CM) MRR MATERALES AVANZADOS-UAM is also acknowledged. M.G. has received financial support through the “Ramón y Cajal” Fellowship program (RYC2020-029317-I) and “Ayudas para Incentivar la Consolidación Investigadora” (CNS2022-135175). M.O. and P.J. acknowledge the financial support from GACR project 20-13692X., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2020-001039-S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2018-000805-M)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dodecanuclear [NiII8Ln4] clusters: rings of corner-sharing {NiII2Ln2} cubanes (Ln = Dy, Gd, Y}

  • Tziotzi, Thomais G.
  • Agapaki, Eleftheria
  • Charkiolakis, Emmanouil K.
  • Gracia, David
  • Ubach I Cervera, Marc
  • Dalgarno, Scott J.
  • Evangelisti, Marco
  • Brechin, Euan K.
  • Milios, Constantinos J.
[Description of methods used for collection/generation of data] Magnetisation data were collected on MPMS-XL and MPMS3 SQUID magnetometers equipped with 5 and 7 T magnets, respectively. Diamagnetic corrections were applied using Pascal's constants. Heat capacity measurements were carried out on a PPMS equipped with a 9 T magnet and a 3He cryostat, using a thin pressed pellet (ca. 1 mg) of a polycrystalline sample of 2, thermalized by ca. 0.2 mg of Apiezon N grease, whose contribution was subtracted using a phenomenological expression., [Methods for processing the data] An indirect estimation of DS and DT was performed in accordance with standard thermodynamic formulations., The solvothermal reaction of NiCl2.6H2O with 1,3,5-tri(2-hydroxyethyl)-1,3,5-triazacyclohexane, LH3, and Ln(OAc)3.4H2O in the presence of salicylaldehyde in MeOH leads to the formation of the dodecanuclear isostructural species [NiII8Ln4(L’)8(OAc)4(OH)8(H2O)4].xH2O (Ln= Dy, x=6 (1); Gd, x= 24 (2); Y, x= 10 (3); L’ = the dianion of the Schiff-base resulting from the reaction of salicylaldehyde and ethanolamine). The metallic core of the clusters describes a ring a of corner-sharing {Ni2Ln2} cubanes assembled on a central, planar rectangular {Ln4} unit. Magnetization studies conducted on complexes 1 - 3 demonstrate the presence of dominant ferromagnetic exchange at low temperatures, which is largely attributed to the Ni⋯Ni interactions. The significant magnetocaloric effect observed in the Gd analogue has been assessed through heat-capacity and magnetization measurements., This work has received support from EU (MSCA-DN MolCal, 101119865), MICIU/AEI/10.13039/501100011033/ and ERDF/EU (PID2021-124734OB-C21, CEX2023-001286-S), Gobierno de Aragón (E11-23R, E12-23R). CJM and TGT would like to thank the National Recovery and Resilience Plan Greece 2.0 (Award Number TAEDR-0535821), funded by the European Union − NextGenerationEU., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laser driven generation of single atom Fe-N-C catalysts for the oxygen reduction reaction

  • Madrid, Ainhoa
  • Tolosana-Moranchel, Álvaro
  • García, Álvaro
  • Rojas Muñoz, Sergio
  • Bartolomé, Fernando
  • Pakrieva, Ekaterina
  • Simonelli, Laura
  • Martínez, Gema
  • Hueso, José L.
  • Santamaría, Jesús
Single-Atom Catalysts (SACs) have emerged as the ultimate solutions in challenging systems bridging the gap between homogeneous and heterogeneous catalysts. However, feasible synthesis methods are necessary to stabilize single metal atoms, increase catalyst loadings and scale up the synthesis. Due to its sluggish kinetics, the oxygen reduction reaction (ORR) is the main source of irreversibility in proton exchange membrane fuel cells (PEMFC). The most promising candidates to replace Pt-based catalysts for the ORR in fuel cells are the so-called Fe-N/C catalysts. These catalysts display high ORR activity in acidic and alkaline electrolytes. In this work, we propose a laser-driven pyrolysis approach to generate Fe-N/C SACs that involves decomposition of aerosolized iron-phthalocyanines. The resulting catalyst displays ORR activity in acidic and alkaline electrolytes, with competitive half-potential and kinetic current density values in comparison with state-of-the-art electrocatalysts., The authors thank funding from the Spanish Research Agency and MICN/AEI (projects PID2020-114926RB-I00, CNS2022-135911 and PID2020-115159 GB-I00) and from CIBER-BBN and the Government of Aragon (Group T57_23R). Financial support from PID2020-116712RB-C21 funded by MCIN/AEI/10.13039/501100011033 is also acknowledged. We also thank the Consejería de Educación, Juventud y Deporte of the Comunidad de Madrid for the Ayuda Destinada a la Atracción de Talento Investigador (2020-T2/AMB-19927) granted to Álvaro Tolosana Moranchel. The Deputyship for Research & Innovation, Ministry of Education of Saudi Arabia for the project number 341 is also acknowledged. The synthesis of materials has been performed by the Platform of Production of Biomaterials and Nanoparticles of the NANOBIOSIS ICTS, more specifically by the Nanoparticle Synthesis Unit (Unit 9) of the CIBER in Bioengineering, Biomaterials & Nanomedicine (CIBER-BBN). The TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia y Materiales de Aragon, Universidad de Zaragoza, Spain. The XAS experiments were performed at the CLAESS beamline of the ALBA synchrotron (proposal number 2022097042) with the support of the ALBA staff. Ayuda CEX2023-001286-S financiada por MICIU/AEI /10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

4D printing of liquid crystal emulsions for smart structures with multiple functionalities

  • Concellón, Alberto
  • Mainik, Philipp
  • Vazquez-Martel, Clara
  • Álvarez-Solana, Cristina
  • Blasco, Eva
3D printing, and more recently 4D printing, has emerged as a transformative technology for fabricating structures with complex geometries and responsive properties. However, employing functional colloidal solutions as inks for printing remains unexplored. In this work, we present a novel and versatile 4D printing approach for fabricating functional and complex-shaped objects using polymerizable liquid crystal (LC) emulsion droplets. Leveraging a digital light processing (DLP) 3D printing technique, we achieve rapid production of intricate 3D geometries with high resolution. The printed structures retain the LC ordering from the precursor droplets, imparting the final objects with shape memory properties, including shape fixation and recovery upon heating or light exposure. Light-responsive behavior is introduced post-printing by embedding an azo dye into the 3D structures. Additionally, we explore the potential to create intrinsically porous 3D structures by selectively removing non-reactive components from the printed geometries, adding an extra level of functionality to the printed objects. Furthermore, we incorporate chiral nematic LCs into the emulsion droplets, producing 3D objects with tunable reflective properties. To our knowledge, this is the first example of DLP 3D printing with emulsions, offering an effective and versatile pathway for developing 4D-printed materials with potential applications in optics, robotics, microfluidics, and biomedicine., A.C. gratefully acknowledges financial support from the projects PID2023-146811NA−I00 and CEX2023-001286-S, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”; JIUZ2023-CIE-04 and CB5/23, funded by Fundación Ibercaja-UNIZAR; and the Gobierno de Aragón-FSE (research group E47_23R). A.C. is also grateful for grant RYC2021-031154-I, funded by MICIU/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR. E.B. acknowledges the funding from the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) via the Excellence Cluster “3D Matter Made to Order” (EXC-2082/1-390761711) and the Carl Zeiss Foundation through the “Carl-Zeiss-Foundation-Focus@HEiKA”. C.V.M. thanks the Fonds der Chemischen Industrie for financial support (Kekulé Fellowship). In addition, R. Schröder, I. Wagner and R. Curticean are thanked for the access and training at the electron microscopy facilities. The authors would also like to acknowledge the use of the SAI (UNIZAR) and CEQMA (UNIZAR-CSIC) services., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Amino-yne reaction for the synthesis of degradable hydrogels: Study of the cleavage of ß-aminoacrylate cross-links

  • Bescós, Sara
  • Barrio, Jesús del
  • Romero, Pilar
  • Florentino Madiedo, Laura
  • Piñol, Milagros
  • Oriol, Luis
This work addresses a study of PEG-derived hydrogels based on β-aminoacrylate cross-links and obtained by amino-yne click chemistry, using a β-aminoacrylate-based model molecule as reference. The pH-triggered cleavage of the β-aminoacrylate bonds was monitored confirming not only the release of the conjugated amine but also the formation of a mixture of chemical species that depends on the acidity of the medium. Moreover, overall hydrogel degradation rates were able to be adjusted by modifying pH, temperature, polymer concentration, or the amine selected as linker of PEG chains. In particular, the labile nature of the β-aminoacrylate bond was confirmed even under physiological conditions (pH 7.4, 37 °C), leading to long-term material degradation. The release and recovery of the conjugated amine after the cleavage of the β-aminoacrylate bonds was demonstrated at both acidic and physiological pH, mimicking the results acquired through model molecule studies., This work was financially supported by Ministerio de Ciencia e Innovación (PID2021-126132NB-I00), the Grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033, and Gobierno de Aragón-FSE (E47_23R research group). S.B-R. acknowledges Gobierno de Aragón for her Ph.D. grant. The authors would like to acknowledge the use of Laboratorio de Microscopias Avanzadas-LMA (Instituto de Nanociencia y Materiales de Aragón-Universidad de Zaragoza), Servicio General de Apoyo a la Investigación-SAI (Universidad de Zaragoza), and Servicios Científico-Técnicos of CEQMA (CSIC-Universidad de Zaragoza) and Conexión Nanomedicina (CSIC)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A spontaneous magnetic moment in an organic radical: Synthesis and characterization of benzodioxepinyl-1,3,2-dithiazolyl

  • Leckie, Dominique
  • Harb, Mohamad
  • Mroz, Natalia
  • Wrixon, Justin D.
  • Campo, Javier
  • Arauzo, Ana B.
  • Bakhshi, Hamed
  • Pilkington, Melanie
The synthesis of the 1,3,2-dithiazolyl radical (1) derived from 3,4-dihydro-2H-1,5-benzodioxepine is described. Crystals of 1 were grown by vacuum sublimation and adopt the orthorhombic space group Pbca. DC SQUID magnetometry reveals Curie-Weiss behavior for T > 20 K (C = 0.376 emu K mol-1 and θ = +5.7 K) consistent with local ferromagnetic interactions. The presence of weaker antiferromagnetic interactions led to magnetic ordering as a canted antiferromagnet (TN = 3.8 K) with a small spontaneous moment (2.5 × 10-4 Nβ) and a small coercivity (ca. 8 Oe) at 2 K. Magnetic ordering was reflected in a field dependence of the magnetic susceptibility below 3.8 K and a peak in the low temperature heat capacity data. A canting angle of 0.08° was estimated from M vs H data., This work was supported by the Canada Research Chairs program and NSERC DG operating grants (J.M.R. DG-2020-04627; M.P. DG-2018-04255). J. C. and A. A. acknowledge the financial support of Grants PID2022-138492NB-I00-XM4, and CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033 and No. E11-23R/M4, funded by Diputación General de Aragón (Spain). Instrumental support was provided through NSERC-RTI awards (M. P. RTI-2017-00091 and J. M. R. RTI-2022-00005)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomic-scale characterization of 180° conductive domain walls in PbZr0.1Ti0.9O3

  • Koutsogiannis, Panagiotis
  • Risch, Felix
  • Pardo, José A.
  • Stolichnov, Igor
  • Magén, César
Conductive domain walls (DWs) in ferroic materials have emerged as promising candidates for applications in nanoelectronics due to their unique properties such as high conductivity and nonvolatility. In this study, we investigate the atomic structure and conductivity of nominally neutral 180° DWs artificially created in an epitaxial thin film of tetragonal PbZr0.1Ti0.9O3. Using piezoresponse force microscopy and scanning transmission electron microscopy, we elucidate the complex structure of these 180° DWs and their coupling with ferroelastic domains, revealing that they exhibit a complex structure due to the strain-mediated interplay with the ferroelastic domains. Our results demonstrate that the 180° DWs conductivity is associated with the emergence of polar discontinuities, including the formation of tail-to-tail charged segments, which has been further confirmed by electron energy loss spectroscopy. Additionally, we investigated the long-term performance of these domain boundaries, demonstrating their unique mobility and structural stability. Our findings provide insights into the atomic-scale mechanisms that turn nominally neutral DWs into highly conductive channels, paving the way for their use in advanced nanoelectronic devices., The authors acknowledge Research Projects PID2020-112914RB-I00 and PID2023-147211OB-C22 funded by Grant MCIN/AEI/10.13039/501100011033. This work was funded by Regional Gobierno de Aragon through Projects E13_23R and E28_23R, including FEDER funding and from the EU Horizon 2020 program under the Marie Skłodowska-Curie Grant Agreement 861153 MANIC. We also are thankful for Grant CEX2023-001286-S supported by MICIU/AEI/10.13039/501100011033 Severo Ochoa action. The authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas (LMA)” at “Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Easy functionalization of carbon nano-onions with disulfides and their use as recyclable heterogeneous organocatalysts

  • Mercadante, Alessandro
  • Bartkowski, Michał
  • Campisciano, Vincenzo
  • La Parola, Valeria
  • Spinella, Alberto
  • Arenal, Raúl
  • Gruttadauria, Michelangelo
  • Giordani, Silvia
  • Giacalone, Francesco
A facile functionalization of carbon nano-onions (CNO), through an atom economical one-step process, with a series of different generation (2.0, 2.5, and 3.0G) poly(amidoamine) (PAMAM) dendrimers with a cystamine core and endowed with either methyl ester or amino groups in the periphery has been reported. The radical addition reaction onto CNO surface, after the homolytic rupture of the S–S bond of cystamine, afforded CNO-PAMAM hybrids, which were extensively characterized using various analytical and spectroscopic techniques such as thermogravimetric analysis (TGA), attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, solid state 13C NMR, Raman, X-ray photoelectron spectroscopy (XPS), dynamic light scattering (DLS) and zeta potential (ZP). Morphological and textural properties were also investigated by high-resolution transmission electron microscopy (HRTEM) analysis and N2 adsorption/desorption isotherms. Furthermore, the presence and availability of –NH2 groups has been demonstrated by applying the functionalized CNO with PAMAM 2.0G and 3.0G as heterogeneous and recyclable organocatalysts in the one-pot three-component synthesis of 2-amino-4H-chromene derivatives., This research was funded by University of Palermo and the Italian Ministry of Education (PRIN 2017 project no. 2017W8KNZW). The authors thank Prof. S. Agnello and Dr. L. Tranchina (ATeN Center, University of Palermo) for the access to Raman spectroscopy. The authors are also grateful to Dr. M. Scopelliti (ATeN Center, University of Palermo) for the XPS measurements. RA acknowledges funding from the Spanish MICIU (PID2019-104739GB-100/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI /10.13039/501100011033) as well as from the Gobierno de Aragon (DGA) under project E13-23R. TEM imaging studies have been conducted in the Laboratorio de Microscopias Avanzadas (LMA) at Universidad de Zaragoza. SG acknowledges support from Science Foundation Ireland (22/FFP-A/11067). SG and RA acknowledge support from COST Action CA21126 - Carbon molecular nanostructures in space (NanoSpace), supported by COST (European Cooperation in Science and Technology)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

FIB-fabrication of superconducting devices based on Bi2Se3 junctions

  • Gracia-Abad, Rubén
  • Sangiao, Soraya
  • Balakrishnan, Geetha
  • Teresa, José María de
All data analyzed and presented in the current study are available from the corresponding authors on reasonable request., Recent advances in quantum technologies are highly influencing the current technological scenario. Hybrid devices combining superconductors and topological insulators represent an excellent opportunity to study the topological superconducting phase, which offers interesting features that might have significant implications in the development of quantum sensing and quantum computing. Furthermore, focused ion beam techniques, whose versatility enables to create sophisticated devices with high degree of customization, can enhance the creation of complex devices. Here, we develop a novel approach for creating single-crystal devices that is applied to the fabrication of superconducting devices based on topological insulator Bi2Se3 in a geometry characteristic of a superconducting quantum interference device. Characterization of these devices reveals that superconductivity is induced in our crystal and the supercurrent is modulated by applying an external magnetic field. These results open the way to tailoring the response of hybrid devices that combine superconductors and topological insulators by focused ion beam techniques., Authors acknowledge grants PID2020-112914RB-I00, PID2023-1464510B-I00 and CEX2023-001286-S funded by MCIN/AEI/10.13039/501100011033, CSIC, through Research Platform PTI-001 and also Gobierno de Aragón through the doctoral fellowship (R. G. A.) and the grant number E13_23R, with European Social Funds (Construyendo Europa desde Aragón). The following networking projects are acknowledged: Spanish Nanolito (RED2022-1634096-T) and COST-FIT4NANO (action CA19140). Authors acknowledge the Laboratory for Advanced Microscopies (LMA) and the Institute of Nanoscience and Materials of Aragón (INMA) from CSIC-Universidad de Zaragoza for offering access to their instruments and expertise. Technical support by the LMA technicians at Universidad de Zaragoza is acknowledged, particularly thank to L. Casado for her assistance with the nanomanipulation procedures. Authors acknowledge also the Physical Measurements Service from Servicio General de Apoyo a la Investigación (SAI) - University of Zaragoza. The work at the University of Warwick was supported by EPSRC, UK through Grant EP/T005963/1., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Finding discrete symmetry groups via machine learning

  • Calvo-Barlés, Pablo
  • Rodrigo, Sergio G.
  • Sánchez-Burillo, Eduardo
  • Martín-Moreno, Luis
We introduce a machine-learning approach (denoted symmetry seeker neural network) capable of automatically discovering discrete symmetry groups in physical systems. This method identifies the finite set of parameter transformations that preserve the system's physical properties. Remarkably, the method accomplishes this without prior knowledge of the system's symmetry or the mathematical relationships between parameters and properties. Demonstrating its versatility, we showcase examples from mathematics, nanophotonics, and quantum chemistry., This work is partly supported and funded by the Spanish “Ministerio de Ciencia, Innovación y Universidades”, MICIU/AEI/10.13039/501100011033 under Grants No. PID2020-115221GB-C41, No. PID2023-148359NB-C21 (also funded by FEDER, UE), and No. CEX2023‐001286‐S (Severo Ochoa Centers of Excellence). We also acknowledge the Aragón Regional Government through project QMAD (E09_23R)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023‐001286‐S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gate-controlled proximity effect in superconductor/ferromagnet van der Waals heterostructures

  • Bobkov, G. A.
  • Bokai, Kirill A.
  • Otrokov, Mikhail M.
  • Bobkov, A. M.
  • Bobkova, Irina V.
The discovery of 2D materials opens up unprecedented opportunities to design new materials with specified properties. In many cases, the design guiding principle is based on one or another proximity effect, i.e., the nanoscale-penetration of electronic correlations from one material to another. In few-layer van der Waals (vdW) heterostructures the proximity regions occupy the entire system. Here, we demonstrate that the physics of magnetic and superconducting proximity effects in 2D superconductor/ferromagnet vdW heterostructures is determined by the effects of interface hybridization of the electronic spectra of both materials. The degree of hybridization can be adjusted by gating, which makes it possible to achieve a high degree of controllability of the proximity effect. In particular, we show that this allows for electrical switching of superconductivity in such structures on and off, as well as for control of the amplitude and sign of the Zeeman splitting of superconducting spectra, opening interesting opportunities for spintronics and spin caloritronics., G.A.B. and I.V.B. acknowledge the support from Theoretical Physics and Mathematics Advancement Foundation “BASIS” via the Project No. 23-1-1-51-1 and from MIPT via Project No. FSMG-2023-0014. K.A.B. acknowledges Saint-Petersburg State University for a research Project No. 95442847. The calculations performed for NbSe2/VSe2 structures were supported by the Russian Science Foundation via the RSF Project No. 24-12-00152. M.M.O. acknowledges the support by MCIN/AEI/10.13039/501100011033/ (Grant No. PID2022-138210NB-I00) and “ERDF A way of making Europe,” by Ayuda CEX2023-001286-S financiada por MICIU/AEI/10.13039/501100011033, as well as MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) promoted by the Government of Aragon., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Harnessing sustainable nanoclusters for sensitive optical detection of tetracyclines and the underlying mechanism

  • Justo-Tirado, Miguel
  • Pérez-Herráez, Irene
  • Escorihuela, Jorge
  • Arenal, Raúl
  • Zaballos-García, Elena
  • Pérez-Prieto, Julia
Simple and rapid sensing methods for the detection of antibiotics in drinks and foods are highly desirable due to the presence of these drugs in food products, as a consequence of extensive abuse of antibiotics in livestock production. In this study, we report a facile synthesis strategy of gold nanoclusters (AuNCs) passivated with N-acetyl-L-cysteine (AuNC@NAC). This nanocluster exhibits a fluorescence emission peak at 700 nm, which gradually decreases at increasing concentrations of antibiotics, such as tetracyclines. The limit of detection (LOD) was determined to be 0.8 ppm with a linear range of 0.1–140 μM (0.04–62 ppm). This method showcased exceptional selectivity in the detection of tetracyclines compared to anions, metallic cations and amino acids. The underlying mechanism has been elucidated, and the fluorescence quenching was found to be a combination of dynamic and static quenching mechanisms, with photoinduced electron transfer (PET) identified as the primary process for dynamic quenching., This study forms part of the Advanced Materials programme (MFA/2022/051) and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (CIPROM/2022/57). R. A. acknowledges funding from the Government of Aragon (project DGA E13-23R (FEDER, EU)) and the support from the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D of the Spanish Ministry of Science, Innovation and Universities (MICIU CEX2023-001286-S MICIU/AEI/10.13039/501100011033). The computational resources from the Servei d'Informàtica de la Universitat de Valencia (SIUV) are gratefully acknowledged. The proteomics facility of Servicio Central de Soporte a la Investigación Experimental (SCSIE) at the University of Valencia is acknowledged for the MALDI-MS analysis., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

How can the filler-polymer interaction in mixed matrix membranes Be enhanced?

  • Hasan, Md. Rafiul
  • Coronas, Joaquín
Mixed matrix membranes (MMMs) constitute a type of molecular separation membranes in which a nanomaterial type filler is dispersed in a given polymer to enhance its selective permeation ability. The key issue in MMMs is the establishing of a proper filler-polymer interaction to avoid non-selective transport paths while increasing permeability but also to improve other membrane properties such as aging and plasticization. Along the pass years several strategies have been applied to enhance the physicochemical interaction between the fillers (e. g. silicas, zeolites, porous coordination polymers, carbonaceous materials, etc.) and the membrane polymers: increase of external surface area, priming, use of intrinsically more compatible fillers, in situ synthesis of filler, in situ polymerization, polymer side-chain modification and post-synthetic modification of filler., This work acknowledges grants PID2022-138582OB-I00 (funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”), TED2021-130621B-C4 (funded by MCIN/AEI/10.13039/501100011033/ and by and the European Union-NextGeneration EU) and CEX2023-001286-S (funded by MICIU/AEI/10.13039/501100011033). Financial support from “the Government of Aragón (T68-23R)” is also thanked., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Light-induced magnetic switching in a coumarin-based Tb single molecule magnet

  • Bartolomé, Elena
  • Arauzo, Ana B.
  • Luzón, Javier
  • Gasque, Laura
We present the intriguing magneto-optical properties of the lanthanide complex [Tb(coum)3(batho)]·[0.7EtOH], named Tb–batho, based on coum = 3-acetyl-4-hydroxylato-coumarin and batho = bathophenanthroline ligands. Tb–batho displays visible-range luminescence with a notable quantum yield (58%) upon sensitization of the “antenna” ligands. Employing a SQUID magnetometer equipped with a magneto-optic option, we conducted comprehensive in situ measurements of light-induced magnetization changes across varied magnetic fields, temperatures, and frequencies, utilizing light wavelengths ranging from 275 to 800 nm. A reversible magnetic modulation of magnetization is observed upon toggling the light “on” and “off,” particularly pronounced at 380 nm excitation, resulting in a magnetization change ΔM(off/on) = 0.376μB fu−1 (ca. 42.6% of the magnetization) at 1.8 K and 1 kOe. Although Tb–batho exhibits field-induced single ion magnet (SIM) behavior, characterized by a thermally-activated process with an activation energy of Ueff/kB = 16.6 K @ 3 kOe and a slow direct process influenced by bottleneck effects, light irradiation does not noticeably alter its dynamic properties. All in all, Tb–batho emerges as a versatile multifunctional molecular material integrating SIM behavior, luminescence and light-induced magnetic switching, holding interest for diverse electronic applications, sensors, or quantum computing., This work was financially supported by the Spanish “Ministerio de Ciencia, Innovacion y Universidades” (PID2022-138492NB-I00), the Gobierno de Aragón (RASMIA E12-23R), the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S and CEX2023-001286-S), and Mexican PAPIIT program (IN219321). Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001263-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Misfit layered compounds: Insights into chemical, kinetic, and thermodynamic stability of nanophases

  • Khadiev, Azat
  • Sreedhara, M. B.
  • Hettler, Simon
  • Novikov, Dmitri
  • Arenal, Raúl
  • Tenne, Reshef
[Conspectus] Compounds with layered structures (2D-materials), like transition metal-dichalcogenides (e.g., MoS2), attracted a great deal of interest in the scientific community in recent years. This interest can be attributed to their unique lamellar structure, which induces large anisotropy in their physicochemical properties. Furthermore, owing to the weak van der Waals interaction between the layers, they can be cleaved along the a-b plane, which allows fabricating single layers with physical properties entirely different from the bulk material. Moreover, stacking layers of different 2D-materials on top of each other has led to a wealth of new observations, for instance, by twisting two layers with respect to each other and producing Moiré lattice. Another outstanding property of inorganic layer compounds is their tendency to form nanotubes, reported first (for WS2) many years ago and subsequently from many other layered compounds.Among the 2D-materials, misfit layer compounds make a special class with an incommensurate and nonstoichiometric lattice made of an alternating layer with rocksalt structure, like LaS (O) and a layer with hexagonal structure, like TaS2 (T). The lack of lattice commensuration between the two slabs leads to a built-in strain, which can be relaxed via bending. Consequently, nanotubes have been produced from numerous MLC compounds over the past decade and their structure was elucidated.Owing to their large surface area, nanostructures are generally metastable and tend to recrystallize into microscopic crystallites via different mechanisms, like Ostwald ripening, or chemically decompose and then recrystallize. The stability of nanostructures at elevated temperatures has been investigated quite scarcely so far. In this perspective, electron microscopy as well as synchrotron-based X-ray absorption and reflection techniques were used to elucidate the chemical selectivity and decomposition routes of rare-earth based MLC nanotubes prepared at elevated temperatures (800-1200 °C).As for the chemical selectivity, entropic effects are expected to dictate the random distribution of the chalcogen atoms on the anion sites of the MLC nanotubes at elevated temperatures. Nonetheless, the sulfur atoms were found to bind exclusively to the rare-earth atom (Ln = La, Sm) of the rocksalt slab and the selenium to the tantalum of the hexagonal TX2 slab. This uncommon selectivity was not found in other kinds of nanotubes like WSe2xS2(1-x). In other series of experiments, the lack of utter symmetry in the multiwall nanotubes leads to exclusions of certain X-ray (0kl) reflections, which was used to distinguish them from the bulk crystallites. The transformation of Ln-based MLC nanotubes into microscopic flakes was followed as a function of the synthesis temperature (800-1200 °C) and the synthesis time (1-96 h). Furthermore, sequential high-temperature transformations of the (O-T) lattice into (O-T-T) and finally (O-T-T-T) phases via deintercalation of the LnS slab was observed. This autocatalytic process is reminiscent of the deintercalation of alkali atoms from different layered structure materials. Annealing at higher temperatures and for longer periods of time eventually leads to the decomposition of the ternary MLC into binary metal-sulfide phases, as well as partial oxidation of the product. This study sheds light on the complex mechanism of high-temperature chemical stability of the nanostructures., We acknowledge DESY (Hamburg, Germany), a member of the Helmholtz Association HGF, for the provision of experimental facilities. Parts of this research were carried out at DESY P23 “In-situ X-ray diffraction and imaging beamline”. Beamtime was allocated for proposal H-20010090 and I-20210786 EC. The authors thank Wolfgang Calibe and Aleksandr Kalinko from DESY P64 beamline for providing the Lambda Si detector and Yves Joly for the useful discussion on XAS and DAFS. M.B.S. acknowledges the Indian Institute of Science for the support and start-up grant funding. R.T. acknowledges the support of The Estate of Manfred Hecht and the Estate of Diane Recanati. We are also grateful to the Irving and Cherna Moskowitz Center for Nano and Bio-Nano Imaging, the Perlman Family Foundation, and the Kimmel Center for Nanoscale Science. R.A. and S.H. acknowledge funding from the European Union’s Horizon 2020 research innovation programme under the Marie Sklodowska-Curie grant agreement No 889546, by the Gobierno de Aragón (DGA) under project E13-23R, as well as by the Spanish Ministry of Science, Innovation and Universities (MICIU) (PID2019-104739GB-100/AEI/10.13039/501100011033) and by the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D of the Spanish MICIU (CEX2023-001286-S MICIU/AEI/10.13039/501100011033)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Enhanced magnetoelastic stress in disordered iron-gallium alloy thin films revealed by direct measurement [Dataset]

  • Begué Gracia, Adrián
  • Proietti, M. G.
  • Arnaudas, José I.
  • Ciria, Miguel
[Description of methods used for collection/generation of data] RHEED images (files starting with Fig1b) were collected using a digital camera UK1117m equipped with a Sony ICX415AL sensor. The pixel type is gray with a pixel width of 8 bits and a variable exposure time and gain was used. Film thickness was obtained with a Discover D8 diffractometer with Cu Ka1 radiation (files starting with Fig1c). Bragg-Bentano scans were conducted with a Rigaku X-ray diffraction at Cu Ka radiation. (files starting with Fig1d). Composition was determined using energy-dispersive X-ray spectroscopy (EDX) using a INSPECT-F50 SEM (https://lma.unizar.es/sem-inspect/) and Wavelength Dispersive Spectroscopy (WDS) in an electron probe micro-analyzer (EPMA) instrument (JXA-iHP200F at the Universidad of Zaragoza). Synchrotron X-ray diffraction measurements were conducted at the BM25 beamline of the ESRF synchrotron at room temperature. A monochromatic beam with a wavelength of 0.7 Å was used. (files starting with Fig2). The reference grid is obtained using the MgO reflections of the monocrystalline substrate used to grow the films. Several non-collinear reflections are requested to calculate the matrix elements. Synchrotron XAS measurements were conducted at the Fe and Ga K-edges at beamline I18 of the Diamond UK’s National Light Source at beamline I18 of the Diamond UK’s National Light Source. Magnetization measurements were obtained using nanoMOKE3 magnetometer using laser beam with p-polarization and red (650 nm wavelength) light. High-field lineal correction is applied. Cantilever beam measurements. The magnetoelastic stress was obtained using a cantilever beam method. The sample is clamped by one end, and a constant magnetic field of 100 mT is rotated. The magnetic field is generated by a homemade dipole mounted on a motorized rotatory stage(Standa 8MR190-90-4247). Several turns are performed to correct drifts and other errors. The capacitor is built with the sample that covers a second smaller electrode. The capacitance is measured using an Andeen Hagerling 2500A capacitance bridge at 1kHz. The difference in capacitance with the magnetic field along the beam and forming 90 degrees is used to obtain the magnetoelastic stress. That value is multiplied by the factor indicated in the Appendix. Files starting with Fig6 include the capacitance recollected, Cap, the capacitance with a correction (using a 4-degree polynomial) to eliminate drift, deltaC, the magnetoelastic stress, ME. and the angular position, angle, starting with H along the beam length., [Methods for processing the data] XAS data. The experimental spectra were fitted by theoretical EXAFS signals calculated by ab initio theoretical phase and amplitudes generated for a cluster of 78 atoms with a radius of 6.1 Å-1, by the TKAtoms code. The central absorber was a Ga or Fe atom with only one kind of Ga (Fe) scatterer. The alloying FeGa effect was obtained by combining the pure Ga-Fe(Ga) and Fe-Fe(Ga)systems at the Ga and Fe K-edge, respectively. The 8.01 Feff code generated the theoretical phase-shifts and amplitudes taking into account beam polarization. The ATHENA and ARTEMIS packages were used for extraction and best-fit procedure of the EXAFS spectra. The best-fit analysis for the two polarizations was performed simultaneously in q-space, in the range 2 - 11 Å-1, by Fourier Filtering of the first peak contribution of the FT spectra that is due to the first and second coordination shells. The contributions of next neighbor (NN) and next-nearest-neighbor (NNN) atoms are merged into a single FT peak due to the proximity of the interatomic distances values (2.48 Å and 2.87 Å respectively in pure bcc Fe). The best-fit parameters were the origin of the photoelectron energy E0, the Ga population in NN and NNN environments, the interatomic distances of first and second coordination shells, and the Debye-Waller factors. The FDMNES code is used to perform \textit{ab initio} simulations of the XANES spectra., The large magnetostriction in FeGa alloys is relevant for manifold applications, but for thin films, it can play a prominent role in controlling the strength of the magnetic anisotropy. Bulk samples show values depending on the extensive preparation procedure compendium, which is limited in its temperature range for high-quality thin-film synthesis. Here, we present a study of the magnetoelastic coupling coefficients B1 and B2 in epitaxial FeGa thin films below 50 nm deposited on the MgO(001) surface at 150 ºC by the cantilever method. Series of films with 22, 28, and 33 at. % Ga do not show thickness-dependent variations for B1 and B2, but -B1 for the 22 at. % Ga composition is 10 MPa, roughly 2 times the bulk value and smaller than the bulk-like value of -B1=12.1 MPa obtained for a film with 17 at. % Ga. This enhancement is correlated with the A2 crystal structure for the film rather than the coexistence with D03 or other ordered nanometric precipitates proposed for bulk samples. Synchrotron diffraction excludes the formation of long-range L60, or D03 precipitates in samples with (001)A2 peaks at concentrations around 25 at. % Ga, which implies partial chemical disorder. The analysis of extended x-ray absorption fine structure measurements points to a D03 local order with a residual number of Ga-Ga pairs. Considering that the substrate quenches the movable strain in the A2 phase described in dual-phase structures, our results point to the important role of the electronic structure of the iron atoms modified by the presence of Ga in the alloy. This effect enlarges B1 in films with the A2 phase, stabilized using epitaxial growth., This work was funded by MICIU/AEI/10.13039/501100011033, ERDF/UE, and NextGenerationEU/PRTR (PID2021-124734OB-C21, CEX2023-001286-S, TED2021-131064B-I00), Gobierno de Aragón (E12-23R) and Ministry of Universities and the European Union-Next Generation for the Margarita Salas fellowship., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., File List: Fig1b_33_13[100].png Fig1b_33_13[110].png Fig1b_17_48[110].png Fig1b_17-48[100].png Fig1b_MgO_[110].png Fig1b_MgO_[100].png Fig1c28_11.cvs Fig1c28_20.cvs Fig1c28_41.cvs Fig1d33_17.cvs Fig1d28_41.cvs Fig1d21_19.cvs Fig2b_l1.cvs Fig2b_l05.cvs Fig2b_l0.cvs Fig2c_l1.cvs Fig2c_l05.cvs Fig2c_l0.cvs Fig3a_21_10par.cvs Fig3a_21_10perp.cvs Fig3a_28_11par.cvs Fig3a_28_11perp.cvs Fig3a_33_13par.cvs Fig3a_33_13perp.cvs Fig3b_21_10par.cvs Fig3b_21_10perp.cvs Fig3b_28_11par.cvs Fig3b_28_11perp.cvs Fig3b_33_13par.cvs Fig3b_33_13perp.cvs Fig3c_33_13parData.cvs Fig3c_33_13parFit.cvs Fig3c_33_13perpData.cvs Fig3c_33_13perpFit.cvs Fig4a_22_10.cvs Fig4a_22_33.cvs Fig4a_28_41.cvs Fig4a_33_13.cvs Fig4a_33_25.cvs Fig4b_22_12.cvs Fig4b_B2.cvs Fig4b_D03.cvs Fig4c_22_12.cvs Fig4c_B2.cvs Fig4c_D03.cvs Fig5aFe100.cvs Fig5aFe110.cvs Fig5b21_19_100.cvs Fig5b21_19_110.cvs Fig6_B1_22_10.cvs Fig6_B1_22_19.cvs Fig6_B1_22_33.cvs Fig6_B1_28_11.cvs Fig6_B1_28_20.cvs Fig6_B1_28_31.cvs Fig6_B1_33_13.cvs Fig6_B1_33_25.cvs Fig6_B1_33_36.cvs Fig6_B2_22_10.cvs Fig6_B2_22_19.cvs Fig6_B2_22_33.cvs Fig6_B2_28_11.cvs Fig6_B2_28_20.cvs Fig6_B2_28_31.cvs Fig6_B2_33_13.cvs Fig6_B2_33_25.cvs Fig6_B2_33_36.cvs Fig6d.cvs, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On-chip phonon-enhanced IR near-field detection of molecular vibrations

  • Bylinkin, Andrei
  • Castilla, Sebastián
  • Slipchenko, Tetiana
  • Domina, Kateryna
  • Calavalle, Francesco
  • Pusapati, Varun-Varma
  • Autore, Marta
  • Casanova, Fèlix
  • Hueso, Luis E.
  • Martín-Moreno, Luis
  • Nikitin, Alexey Y.
  • Koppens, Frank H. L.
  • Hillenbrand, Rainer
Phonon polaritons – quasiparticles formed by strong coupling of infrared (IR) light with lattice vibrations in polar materials – can be utilized for surface-enhanced infrared absorption (SEIRA) spectroscopy and even for vibrational strong coupling with nanoscale amounts of molecules. Here, we introduce and demonstrate a compact on-chip phononic SEIRA spectroscopy platform, which is based on an h-BN/graphene/h-BN heterostructure on top of a metal split-gate creating a p-n junction in graphene. The metal split-gate concentrates the incident light and launches hyperbolic phonon polaritons (HPhPs) in the heterostructure, which serves simultaneously as SEIRA substrate and room-temperature infrared detector. When thin organic layers are deposited directly on top of the heterostructure, we observe a photocurrent encoding the layer’s molecular vibrational fingerprint, which is strongly enhanced compared to that observed in standard far-field absorption spectroscopy. A detailed theoretical analysis supports our results, further predicting an additional sensitivity enhancement as the molecular layers approach deep subwavelength scales. Future on-chip integration of infrared light sources such as quantum cascade lasers or even electrical generation of the HPhPs could lead to fully on-chip phononic SEIRA sensors for molecular and gas sensing., The work was financially supported by the European Union’s Horizon 2020 research and innovation program under grant agreement Nos. 785219 and 881603 (GrapheneCore2 and GrapheneCore3 of the Graphene Flagship). R.H., F. Casanova, and L.E.H. acknowledge funding by the Spanish MICIU/AEI/10.13039/501100011033 (grant CEX2020-001038-M). R.H. acknowledges funding by the Spanish MICIU/AEI/10.13039/501100011033 and ERDF/EU (grants RTI2018-094830-B-I00 and PID2021-123949OB-I00). F. Casanova and L.E.H. acknowledge funding by the Spanish MICIU/AEI/10.13039/501100011033 and ERDF/EU (grant PID2021-122511OB-I00). F.H.L.K. acknowledges funding by the Spanish MICIU/AEI/10.13039/501100011033 (grants FIS2016-81044, PID2019-106875GB-100, CEX2019-000910-S, PCI2021-122020-2A and PDC2022-133844-100). A.N. acknowledges funding by the Spanish MICIU/AEI/10.13039/501100011033 and ERDF/EU (grants PID2020-115221GB-C42 and PID2023-147676NB-I00); by the Department of Education of the Basque Government (grant PIBA-2023-1-0007). L.M.-M and T.S. acknowledge funding by the Spanish MICIU/AEI/10.13039/501100011033 (grants PID2020-115221GB-C41 and CEX2023-001286-S); by the Government of Aragon through Project Q-MAD. F.H.L.K, S.C., and V.P. acknowledge funding by the European Union (ERC, POLARSENSE, 101123421)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2020-001038-M)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000910-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Opportunities for nanomaterials in enzyme therapy

  • Torres Herrero, Beatriz
  • Armenia, Ilaria
  • Ortiz, Cecilia
  • Fuente, Jesús M. de la
  • Betancourt, Lorena
  • Grazú, Valeria
In recent years, enzyme therapy strategies have rapidly evolved to catalyze essential biochemical reactions with therapeutic potential. These approaches hold particular promise in addressing rare genetic disorders, cancer treatment, neurodegenerative conditions, wound healing, inflammation management, and infectious disease control, among others. There are several primary reasons for the utilization of enzymes as therapeutics: their substrate specificity, their biological compatibility, and their ability to generate a high number of product molecules per enzyme unit. These features have encouraged their application in enzyme replacement therapy where the enzyme serves as the therapeutic agent to rectify abnormal metabolic and physiological processes, enzyme prodrug therapy where the enzyme initiates a clinical effect by activating prodrugs, and enzyme dynamic or starving therapy where the enzyme acts upon host substrate molecules. Currently, there are >20 commercialized products based on therapeutic enzymes, but approval rates are considerably lower than other biologicals. This has stimulated nanobiotechnology in the last years to develop nanoparticle-based solutions that integrate therapeutic enzymes. This approach aims to enhance stability, prevent rapid clearance, reduce immunogenicity, and even enable spatio-temporal activation of the therapeutic catalyst. This comprehensive review delves into emerging trends in the application of therapeutic enzymes, with a particular emphasis on the synergistic opportunities presented by incorporating enzymes into nanomaterials. Such integration holds the promise of enhancing existing therapies or even paving the way for innovative nanotherapeutic approaches., This work has been supported by the European Commission through the HOTZYMES Project (H2020-FETOPEN-RIA 829162 to V.G), by MICIU/AEI /10.13039/501100011033 (PID2020-118485RB-I00 to V.G and J.M.F, and ayuda CEX2023-001286-S), and by CIBER-Consorcio Centro de Investigación Biomédica en Red/Instituto de Salud Carlos III(CB16/01/00263 to J.M.F). This research work was also funded by the European Commission – NextGenerationEU (Regulation EU 2020/2094) through CSIC's Global Health Platform (PTI Salud Global). B.Tsingle bondH. acknowledges financial support thanks to the DGA Fellowship program (December 2019–November 2020) and her predoctoral fellowship (FPU19/01311) funded by MICIU/AEI /10.13039/501100011033 and “ESF Investing in your future”. J.M.F. also acknowledges support from Gobierno de Aragón and “ERDF A way of making Europe” for funding the Bionanosurf (E15_20R) research group. L.B and C.O. had financial support from PEDECIBA, Universidad ORT Uruguay, and ANII (FMV_1_2023_1_176582)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polyoxometalate-ionic liquids for mitigating the effects of iron gall ink corrosion on cellulosic supports

  • Nunes, Margarida
  • García-Orduña, Pilar
  • Atrián-Blasco, Elena
  • Costa Vieira, Joana
  • Costa, Ana Paula
  • Cabral Amaral, Maria Emília
  • Claro, Ana
  • Ferreira, Teresa
  • Mitchell, Scott G.
Iron gall ink (IGI), renowned for its indelibility, was the most important writing ink in the Western world from the 15th to the late 19th century. However, it is now known that IGIs induce acid-catalyzed hydrolysis and iron-catalyzed oxidation of the cellulose in historical paper documents. These mechanisms of deterioration cause significant damage to the writing support materials, including color alteration and burn-through appearance, and in the worst scenarios, physical disintegration of the supports. Minimally invasive, long-term effective conservation treatments that tackle the underlying mechanisms of IGI degradation and their corrosion effects are yet to be developed. This study introduces the deployment of hydrophobic and anticorrosive polyoxometalate-ionic liquids (POM-ILs) as colorless coatings to counteract IGI-corrosion of cellulosic supports. Model IGI-containing papers (mockups) were prepared, coated with POM-ILs, and artificially aged to assess the compatibility of POM-ILs with IGI-containing documents. Comprehensive monitoring using colorimetric and scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM/EDS) analyses showed minimal interference with the aesthetic properties and morphology of the IGI mockups. In addition, polyoxometalates (POMs) with vacant metal atom sites in the cluster shell can be used to coordinate free transition metal ions. The ability of a monolacunary Keggin-type polyoxotungstate to coordinate free Fe(II) from IGI solution was demonstrated using UV–vis analysis. This led to the formation of a dimeric species, [(SiW11O39Fe)2O]K12·28H2O, which was characterized by single-crystal X-ray diffraction. Altogether, this study points to POM-ILs as promising protective coatings for effectively preserving historical IGI-written heritage., This work was carried out within the framework of the project IRONiC─Iron Gall Ink Challenges (IronIC)─History and Conservation of a Disappearing Cultural Heritage (PTDC/ART-HIS/32327/2017) funded by FCT. The authors are grateful for the FCT support through the PhD grant (SFRH/BD/147528/2019) and the additional grant due to the COVID-19 pandemic crisis (COVID/BD/153467/2023). This work was funded through the grant PID2022–141276OB-I00 and CEX2023–001286-S funded by MCIN/AEI/10.13039/501100011033 (Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación, Spain). This study was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) promoted by the Government of Aragón. There was the collaboration of the research unit HERCULES Laboratory/IN2PAST (10.54499/UIDP/04449/2020, 10.54499/UIDB/04449/2020 & LA/P/0132/2020) and the Fiber Materials and Environmental Technologies (FibEnTech-UBI), on the extent of the project reference UIDB/00195/2020, funded by national funds through the IP/MCTES (PIDDAC)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-molecule magnet behavior and spin structure of an FeIII7 Cartwheel cluster revealed by sub-Kelvin magnetometry and Mössbauer spectroscopy: The final pieces of the puzzle

  • Bartolomé, Juan
  • Bartolomé, Elena
  • Luis, Fernando
  • Burzurí, Enrique
  • Camón, Agustín
  • Filoti, George
  • Ako, Ayuk M.
  • Braun, Jonas
  • Mereacre, Valeriu
  • Anson, Christopher E.
  • Powell, Annie K.
This paper is dedicated to the memories of the late Prof. G. Filoti (1942–2021) NIMP, Bucharest-Magurele, Romania, and Prof. N. Turta (1940–2015), Institute of Chemistry, Academy of Sciences, Chisenau, Moldavia., The spin frustration and other magnetic properties of the "cartwheel" heptanuclear cluster [FeIII7O3(O2CtBu)9(Me-dea)3(H2O)3] (Me-deaH2 = N-methyldiethanolamine) have been previously investigated; we present here a Mössbauer spectroscopic study and sub-Kelvin magnetization and ac susceptibility measurements which enable a complete magnetic picture of this frustrated cluster. 57Fe Mössbauer spectra above 150 K showed three doublets in a 1:3:3 ratio, which could be assigned by their respective quadrupole splittings to the central Fe(1) and the peripheral Fe(2) and Fe(3). The field dependence of the corresponding magnetic sextets at 3 K showed that the spins on the central Fe(1) and the three peripheral Fe(2) sites with O5N coordination are oriented mutually coparallel, while these are antiparallel to the spins on the peripheral Fe(3) sites with O6 coordination, resulting in an overall S = 5/2 ground state. This provides experimental confirmation of the previously proposed spin ground state structure. Upon cooling to sub-Kelvin temperatures, a crossover to spin blocking with TB ≈ 0.21 K could be observed. This single-molecule magnet behavior had been expected but had not been observable with a conventional SQUID. The anisotropy barrier, of 3-fold symmetry, can be described in terms of the parameter D/kB = -0.47 K and a fourth-order perturbation; the latter enables thermally activated quantum tunneling through the excited sublevel mz = ± 3/2, with an activation barrier of U/kB = 1.9 K., The authors acknowledge grants PID2022-138492NB-I00 and PID2022-140923NB-C21&C22 funded by MCIN/AEI/10.13039/501100011033s, ERDF “A way of making Europe” and ESF “Investing in your future”, Gobierno de Aragón (grant E09-17R-Q-MAD and RASMIA project E12-23R), the Advanced Materials program funded by the European Union Next GenerationEU (PRTR-C17.I1), MCIN and Gobierno de Aragón, and the State Research Agency, through the Severo Ochoa Program for Centres of Excellence in R&D (CEX2023-001263-S and CEX2023-001286-S). A.M.A., J.B., V.M., C.E.A., and A.K.P. acknowledge funding from the Helmholtz Foundation POF MSE., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stable CoO2 nanoscrolls with outstanding electrical properties

  • Hettler, Simon
  • Roy, Kankona Singha
  • Arenal, Raúl
  • Panchakarla, Leela S.
This paper is dedicated to the memory of Professor Leela S. Panchakarla, dear supervisor (K.S.R) and colleague, outstanding scientist, who died prematurely., Layered CoO2 is of great interest for its promising properties but is meta-stable in its bulk form. CoO2 is synthesized by converting the quasi-1D crystal structure of bulk Ca3Co2O6 via a hydrothermal treatment. The resulting nanostructures are predominantly nanoscrolls with very thin walls, which exhibit long-term stability. A detailed structural investigation reveals that the CoO2 is found to crystallize in monoclinic form, similar to the related CaCoO2-CoO2 misfit structure. Individual nanoscrolls are characterized electrically and show a p-type semiconducting nature with a high current-carrying capacity of 4·105 A cm−2 and an extremely high breakdown voltage of up to 270 kV cm−1. The results demonstrate the possibility to stabilize meta-stable materials in low-dimensional forms and a promising application of the nanoscrolls as interconnect in high-voltage electronic circuitry., Dear late Prof. L.S.P. would like to acknowledge Science and Engineering Research Board under the Department of Science and Technology (DST-SERB), Government of India for funding (EMR/2016/003594). K.S.R. acknowledges the Department of Chemistry, Department of Physics and Department of Materials Engineering and Materials Science, Indian Institute of Technology (IIT) Bombay and Industrial Research and Consultancy Center (IRCC), Sophisticated Analytical Instrument Facility (SAIF), Centre of Excellence in Nanoelectronics (CEN) IIT Bombay and Fund for Improvement of S&T Infrastructure (FIST) for all the facilities provided. K.S.R. sincerely thanks Gayatri Vaidya at IIT Bombay for helpful assistance and discussion about the fabrication process. S.H. and R.A. acknowledge funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska–Curie grant agreement No. 889546 and from the Spanish Ministry of Science, Innovation and Universities (MICIU) (project grant PID2019-104739GB-100/AEI/ 10.13039/501100011033). R.A. acknowledges funding from the Government of Aragon (project DGA E13-23R), from the European Union H2020 programs “ESTEEM3” (823717) and “Graphene Flagship” (881603) as well as from the Spanish MICIU by the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2023-001286-S MICIU/AEI/10.13039/501100011033). Most of the TEM measurements were performed in the Laboratorio de Microscopias Avanzadas (LMA) at the Universidad de Zaragoza (Spain)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Symmetry, magnetic transitions and multiferroic properties of B-site-ordered A2MnB'O6 perovskites (B' = [Co, Ni])

  • García Muñoz, Josep Lluís
  • Zhang, Xiaodong
  • Subías, Gloria
  • Blasco, Javier
This article is part of a focused issue on Magnetic Structures., The presence of magnetic atoms at the A and B sites and the coupling between these two spin subsystems in perovskites gives rise to a variety of exciting effects. In particular this coupling attracts interest from the field of novel multiferroic and magnetoelectric oxides. Moreover, magnetic double perovskites presenting cationic order at the B sites incorporate an additional modulation that can favor symmetry breaking, multiferroic, magnetoelectric and polar phases. Here, we describe the magnetic structures obtained from neutron diffraction and analyze the symmetry properties of well ordered A2MnB′O6 double perovskites with A = Lu, Yb, Tm, Er, Ho, Y, Tb, La0.5Tb0.5, La and B′ = Co or Ni. A rich variety of magnetic orders is formed that have been identified and described, and their symmetry properties are discussed in relation to the multiferroic and magnetoelectric properties of the different compounds., We acknowledge financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades (MINCIU), through Project Nos. PID2021-124734OB-C21 and PID2021-124734OB-C22, and RTI2018-098537-B-C22, cofunded by ERDF from EU, and "Severo Ochoa" Programme for Centres of Excellence in R&D (CEX2023-001263-S and CEX2023-001286-S); from the Generalitat de Catalunya (Project 2021 SGR 445); from Gobierno de Aragón (Project E12-23R); XZ was financially supported by China Scholarship Council (CSC) with No. 201706080017. We also acknowledge the Institut Laue-Langevin (ILL) for provision of beam time., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001263-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of three isoelemental MXenes and their structure-property relationships

  • Downes, Marley
  • Shuck, Christopher E.
  • Wang, Ruocun John
  • Michałowski, Paweł Piotr
  • Shochat, Jonathan
  • Zhang, Danzhen
  • Shekhirev, Mikhail
  • Yang, Yizhou
  • Zaluzec, Nestor J.
  • Arenal, Raúl
  • May, Steven J.
  • Gogotsi, Yuri
The MXene family has rapidly expanded since its discovery in 2011 to include nearly 50 unique MXenes, not accounting for solid solutions and diverse surface terminations. However, a question raised since their discovery has been: What is the effect of n? In other words, how does the number of layers affect the MXene properties? To date, no direct study of the impact of n has been conducted due to the lack of isoelemental MXene compositions spanning more than two n values. Herein, we report on a system of three MXenes with identical M-site chemistries, (Mo2/3V1/3)n+1CnTx (n = 1, 2, and 3), allowing for the study of MXene structure–property relationships across n, for the first time. Chemical analysis of the samples shows complete and partial ordering of the M-elements in the n = 2 and 3 samples, respectively. We show that sample stability gradually evolves as n is increased from 1 to 3, while electronic and electrochemical properties exhibit more significant changes in going from n = 1 to 2 than from n = 2 to 3., The authors would like to acknowledge the U.S. National Science Foundation (Grant DMR-2041050) for funding this work. M.D. thanks the Drexel UREP Undergraduate Research Grant and Murata Manufacturing, Japan, for their funding of her undergraduate research. P.P.M. was supported by the National Centre for Research and Development (NCBR) within LIDER XII LIDER/8/0055/L-12/20/NCBR/2021 project. Support for the electronic characterization (Y.Y. and S.J.M.) was provided by the U.S. Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, grant No. DE-SC0018618. R.A. acknowledges funding from the Spanish MICIU (PID2019-104739GB-100/AEI/10.13039/501100011033), CEX2023-001286-S MICIU/AEI/10.13039/501100011033) and by the MICIU with funding from European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon (DGA) as well from the DGA project E13-23R. Part of the STEM imaging studies have been conducted in the Laboratorio de Microscopias Avanzadas (LMA) at Universidad de Zaragoza. The STEM work at Argonne National Laboratory (NJZ/RA) was supported by the Advanced Materials for Energy-Water Systems (AMEWS) Center, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences at Argonne National Laboratory under contract DE-AC02-06CH11357 and at the University of Chicago the National Science Foundation MRI Award # 2117896. The Argonne Picoprobe AEM was developed under CRADA 1300701 between Argonne National Laboratory and Thermo Fisher Scientific Instruments. The authors would like to acknowledge Dr. Ray Unocic for his contribution to TEM characterization. M.D. would like to thank Aidan Cotton for his assistance in documentation. Finally, the authors would like to acknowledge the usage of the XRD instrumentation provided by the Drexel University Materials Characterization Core (MCC). This work has been adapted from the M.S. thesis titled “The Effect of n: A Delve into MXene Structure–Property Relations” by M.D. (Drexel University, 2024)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thin film nanocomposite membranes based on renewable polymer Pebax® and zeolitic imidazolate frameworks for CO2/CH4 separation

  • Refaat, Dalia
  • Yahia, Mohamed
  • Coronas, Joaquín
This study investigates the impact of integrating Pebax® Rnew® 30R51, a sustainable elastomer-type copolymer material, with zeolitic imidazolate frameworks (ZIFs) to develop advanced membranes for CO2/CH4 gas separation. The fabrication process of ZIF/Pebax® Rnew® 30R51 thin films was optimized to achieve uniform and defect-free thin film composite (TFC) membranes. Crucial membrane properties, including permeability, selectivity and separation efficiency, were analyzed with variations in ZIF type, loading levels, film thickness and operating conditions. Additionally, the resulting TFC and ZIF/Pebax® Rnew® 30R51 thin film nanocomposite (TFN) membranes were subjected to characterization via FTIR, XRD, TGA and SEM to evaluate their physicochemical properties. Nanoparticles of ZIF-8, NH2-ZIF-8 and ZIF-94 were individually added (at 5–15 wt% loadings) to the Pebax® Rnew® 30R51 matrix to develop the CO2 separation efficiency. The pristine TFC membrane showed a 66 GPU CO2 permeance and a 37.5 CO2/CH4 separation selectivity, primarily due to improved CO2 mass transport. Upon inclusion of ZIFs, the CO2 permeance with 5 wt% loadings of ZIF-8, NH2-ZIF-8 and ZIF-94 increased to 148, 99 and 125 GPU, respectively, despite this, the CO2/CH4 separation selectivity maintained at 29.4, 37.0 and 27.0, respectively., This work acknowledges grants PID2022–138582OB-I00 (funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”), TED2021–130621B-C4 (funded by MCIN/AEI/10.13039/501100011033/ and by and the European Union-NextGeneration EU) and CEX2023–001286-S (funded by MICIU/AEI /10.13039/501100011033). M. Yahia was supported through “the María Zambrano program” funded by both “the European Union's Next-Generation-EU” and “the Spanish Ministerio de Universidades”. Financial assistance from the Government of Aragón (T68_23R) is also acknowledged. Technical guidance and instrumentation provided by “the Universidad de Zaragoza” through “the national facility ELECMI ICTS Laboratorio de Microscopías Avanzadas” and “the Servicio General de Apoyo a la Investigación-SAI” are thanked., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Linear response theory for cavity QED materials at arbitrary light-matter coupling strengths

  • Román-Roche, Juan
  • Gómez-León, Álvaro
  • Luis, Fernando
  • Zueco, David
We develop a linear response theory for materials collectively coupled to a cavity that is valid in all regimes of light-matter coupling, including symmetry-broken phases. We present and compare two different approaches. First, we use a coherent path-integral formulation for the partition function to obtain thermal Green's functions. This approach relies on a saddle-point expansion for the action that can be truncated in the thermodynamic limit. Second, we formulate the equations of motion for the retarded Green's functions and solve them. We use a mean-field decoupling of high-order Green's functions to obtain a closed, solvable system of equations. Both approaches yield identical results in the calculation of response functions for the cavity and material. These are obtained in terms of the bare cavity and material responses. In combination, the two techniques clarify the validity of a mean-field decoupling in correlated light-matter systems and provide complementary means to compute finite-size corrections to the thermodynamic limit. The theory is formulated for a general model that encompasses most of the systems typically considered in the field of cavity QED materials. Finally, we provide a detailed application of the theory to the quantum Hall effect and to a collection of spin models., Despite the enormous impediments in spending the budget, the authors must acknowledge funding from the Grant No. TED2021-131447B-C21 by MCIN/AEI/10.13039/501100011033 and the EU 'NextGenerationEU'/PRTR. We also acknowledge Grant No. CEX2023-001286-S by MICIU/AEI/10.13039/501100011033, the Gobierno de Aragón (Grant E09-17R Q-MAD), Quantum Spain and the CSIC Quantum Technologies Platform PTI-001. J.R.-R. acknowledges support from the Ministry of Universities of the Spanish Government through the Grant No. FPU2020-07231., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

A linear {Fe2Ni} cluster and a structurally closely related quasi one-dimensional {Fe2Ni} chain

  • Charkiolakis, Emmanouil K.
  • Gracia, David
  • Ubach I Cervera, Marc
  • Evangelisti, Marco
  • Milios, Constantinos J.
The solvothermal reaction between FeCl3·6H2O, NiCl2·6H2O, 2-hydroxynaphthaldehyde, and glycine in MeOH results in the formation of the trinuclear heterometallic cluster [FeΙΙΙ2NiΙΙ(L1)4(MeOH)4] (1) in good yield, while the same reaction upon replacing glycine with dimethyl-glycine, results in the formation of the closely related quasi one-dimensional coordination polymer {[FeΙΙΙ2NiΙΙ(L2)4(MeOH)2]n} (2) (L1, L2: the dianionic form of the Schiff-base ligand derived from the condensation of 2-hydroxynaphthaldehyde and glycine (L1 for 1), or dimethyl-glycine (L2 for 2)). The structure of 1 describes a linear trimetallic {FeIII2Ni} unit, whereas complex 2 consists of repeating linear {FeIII2Ni} units with each one connected to two neighbouring units via four coordination bonds, forming a quasi one-dimensional chain. The structural similarity between complex 1 and the repeating unit of complex 2 is remarkable. However, their magnetic properties differ significantly, with complex 1 displaying dominant ferromagnetic interactions, and complex 2 showing antiferromagnetic interactions., This work has received support from EU (MSCA-DN MolCal,101119865), MICIU/AEI/10.13039/501100011033/ and ERDF/EU (PID2021-124734OB-C21, CEX2023-001286-S), Gobierno de Aragón (E11-23R, E12-23R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Metal-free dyes on TiO2 for PEC water splitting

  • Ansón-Casaos, Alejandro
  • Martínez-Barón, Carlos
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Blesa, María Jesús
Work presented at III Workshop on Materials far Photocatalysis, Energy and Clean Environment (IIIWMPECE), ICMS -Sevilla, (Spain), February 20-21, 2025., Dye sensitization has been widely studied in electrochemical photovoltaic cells. More recently, a similar concept has been explored within the context of photoelectrochemical (PEC) water splitting, with a particular facus on TiO2 photoelectrodes. Despite the prevalence of organometallic complexes featuring expensive metals (Ru, Ir) in current dye and molecular catalyst research, efforts should be directed towards more abundant metals and purely organic photoactive compounds. One of the most efficient molecular structures in rr-conjugated building blocks organic to boost metal-free intramolecular dyes combines charge donar transfer (D), and acceptor electron (A), transport and to TiO2. In this communication, the water-splitting performance of TiO2 electrodes TiO2. sensitized with a series of such dye molecules (Table 1 ), including their possible combination with carbon nanomaterials, is summarized and analyzed. Electronic HOMO and HUMO levels, as well as reduction potentials of the dye molecules, reveal favorable thermodynamicreveal conditions, whereas their limited stability under water oxidation conditions seems to be related to purely kinetic effects. Tackling this challenge effects. remains crucial yetfar achieving future advances toward an artificial photosynthesis., Financial support from MCIN/AEl/10.13039/501100011033, MICIU/AEI/10.13039/501100011033 and "ERDF A Way of making Europe" under project grant PID2022-139671O8-I00 and CEX2023-001286-S, as well as from the Gobierno de Aragón (DGA, T03_23R and E47-23R) and Universidad de Zaragoza (UZ2023-CIE-01)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Machine-learning potential for phonon transport in AlN with defects in multiple charge states

  • Dou, Ying
  • Shimizu, Koji
  • Carrete, Jesús
  • Fujioka, Hiroshi
  • Watanabe, Satoshi
Understanding phonon transport properties in defect-laden AlN is important for their device applications. Here, we construct a machine-learning potential to describe phonon transport with ab initio accuracy in pristine and defect-laden AlN, following the template of Behler-Parrinello-type neural network potentials (NNPs) but extending them to consider multiple charge states of defects. The high accuracy of our NNP in predicting second- and third-order interatomic force constants is demonstrated through calculations of phonon bands, three-phonon anharmonic, phonon-isotope and phonon-defect scattering rates, and thermal conductivities. In particular, our NNP accurately describes the difference in phonon-related properties among various native defects and among different charge states of the defects. They reveal that the phonon-defect scattering rates induced by V3+N are the largest, followed by V3−Al, and that V1+N is the least effective scatterer. This is further confirmed by the magnitude of the respective depressions of the thermal conductivity of AlN. Our findings reveal the significance of the contribution from structural distortions induced by defects to the elastic scattering rates. The present work shows the usefulness of our NNP scheme to cost-efficiently study phonon transport in partially disordered crystalline phases containing charged defects., This work was supported by JSPS KAKENHI Grants No. 19H02544, No. 19H04536, No. 21H05552, No. 23H04100, and No. 24K01360. Some of the calculations used in this paper were performed using computer facilities at the ISSP Supercomputer Center and Information Technology Center, The University of Tokyo, and Institute for Materials Research, Tohoku University (MASAMUNE-IMR). This study was also supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) promoted by the Government of Aragon. J.C. acknowledges funding from MICIN/AEI/10.13039/501100011033 through Grant No. CEX2023-001286-S., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The simultaneous total oxidation of toluene, propene, and CO environmental pollutants using bimetallic Au-Pt/ZrO2/UVM-7 catalysts

  • Aggett, Kieran J.
  • García Martínez, Tomás
  • Morgan, David J.
  • Peláez-Fernández, Mario
  • Mayoral, Álvaro
  • Arenal, Raúl
  • Solsona, Benjamín
  • Amorós, Pedro
  • Taylor, Stuart H.
11 figures, 4 tables., Supported precious metal catalysts, containing either mono or bimetallic Au and Pt nanoparticles, anchored on a hierarchical porous UVM-7 silica structure, were prepared and evaluated for the removal of volatile organic pollutants by oxidation. The catalysts were investigated for the simultaneous total oxidation of three model compounds: propene, toluene, and CO, commonly associated with “cold start pollutants” in automotive exhausts. Only Au showed low catalytic activity, while Pt nanoparticles were active, with a greater concentration of accessible Pt nanoparticles corresponding with increased catalytic activity. Interestingly, having both metals present on the same catalyst together was preferential for producing higher activity in the total oxidation of CO, propene, and toluene. The loadings of Pt nanoparticles on the catalyst surface, as well as the synthesis method, were important controlling factors. The order of metal loading deposition was influential, depositing Au and Pt sequentially resulted in surface enrichment of the latter deposited metal, leading to enhanced catalytic performance. When Au and Pt were loaded simultaneously, alloy formation occurred, and the surface Pt enrichment was more moderate, but still maintaining better catalytic performance compared with the pure Pt catalyst., A.M., M.P.F., and R.A. acknowledge the Spanish MICIU for funding (CEX2023-001286-S MICIU/AEI/10.13039/501100011033) as well as the regional government of Aragon (DGA E13_23R). [...]. R.A. and A.M. also acknowledge the support of the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CNS2023-144346/AEI /10.13039/501100011033, respectively). M.P.F. acknowledges the support of the Spanish MICIU (Ayudas Margarita Salas). B.S. thanks the MCIN/AEI through the project TED2021-129555B-I00/AEI/10.13039/501100011033/ Unión Europea NextGeneration EU/PRTR. P.A. thanks PID2021-126304OB-C43 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe.” T.G. would like to acknowledge the Spanish Ministry of Science, Innovation and Universities through its Mobility program for stays of senior researchers and professors in foreign countries (PRX18/00474) and the regional government of Aragon (DGA T04_20R) for funding. XPS analysis work was performed through the support of the EPSRC National Facility for X-ray photoelectron spectroscopy (‘HarwellXPS’, Grant numbers EP/Y023587/1, EP/Y023609/1, EP/Y023536/1, EP/Y023552/1, and EP/Y023544/1)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Disrupting J-aggregation in triazatruxene dimers to develop responsive luminescent inks for anti-counterfeiting applications

  • Martín, Raúl
  • Echeverri, Marcelo
  • González, Francisco
  • Andrés, Alicia de
  • Ruiz Delgado, M. Carmen
  • Concellón, Alberto
  • Serrano, José Luis
  • Gómez-Lor, Berta
The fight against counterfeiting is a crucial concern for economies around the world, underscoring the urgent need for effective measures to ensure the legitimacy of products and documents. Luminescent security inks have emerged as effective tools in this battle. The third generation of these inks, incorporating stimuli-responsive organic materials, enables unique efficiency. In this work, the stimuli-responsive behavior of three trialkylated triazatruxene dimers (TRI1, TRI2, and TRI3), endowed with N-alkyl chains of different length is investigated. Among them, TRI3, with three flexible dodecyl chains, shows remarkable stimuli-responsive fluorescence that is attributed to thermally or shear-induced phase transitions between a tetragonal columnar phase and a discotic-nematic liquid crystal phase. Such transformation involves the breakdown of highly emissive J-aggregates with a strong influence on the resulting emissive color. Interestingly, these stimuli-triggered transformations are spontaneously reversed, which renders this compound very interesting in the search of third-generation security inks., This research was funded by MCIN/AEI/ 10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR" (PDC2021-121002-I00, PID2023-150022NB-I00, PID2022-139548NB-I00, PID2023-146811NA-I00 and CEX2023-001286-S) by Junta de Andalucia (P09FQM-4708 and P18-FR-4559) and Gobierno de Aragon-FSE (E47_23R). R. Martin acknowledges the Spanish Ministry of Universities for a Margarita Salas postdoctoral fellowship under the agreement UNI/551/2021.A. Concellon is grateful for grant RYC2021-031154-I funded by MICIU/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR. The authors would like to thank the computer resources, technical expertise, and assistance provided by the SCBI (Supercomputing and Bioinformatics)., We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Degradable ureido-polycarbonate block copolymers with a complex UCST thermoresponse

  • Martín-Martín, Javier
  • Abad, Miriam
  • Lopez de Pariza, Xabier
  • Ezquerra, Tiberio A.
  • Nogales, Aurora
  • Sardon, Haritz
  • Sebastián, Víctor
  • Oriol, Luis
  • Piñol, Milagros
In this work, amphiphilic block copolymers (BCs) consisting of a hydrophilic poly(ethylene glycol) methyl ether (PEG) and a degradable polycarbonate block derived from 2,2-bis(hydroxymethyl)propionic acid (bis-MPA) with pendant ureido units, along with corresponding homopolycarbonates are described. Polymers are synthesized by combining ring opening polymerization (ROP) and thiol-ene/yne functionalization to incorporate UCST-promoting ureido groups. For homopolycarbonates, increasing the ureido groups density along the polymer chain facilitates the upper critical solution temperature (UCST)-type thermoresponse in water. Because of their amphiphilic character, BCs form stable self-assemblies either by direct dispersion in water, co-solvent method or microfluidics. Upon heating, these self-assemblies swell, and collapse due to extensive hydration of the polycarbonate block, rather than becoming solubilized. Thermoresponsiveness is analyzed in terms of the number of ureido groups in the polycarbonate for a given polycarbonate block length as well as the length of polycarbonate block. As a proof of concept, the potential of these self-assemblies as thermoresponsive drug nanocarriers is evaluated, using curcumin as a hydrophobic model drug., This work was financially supported by MICIN/AEI (PDI2021-1261132NB-100 and PID2021-127847OB-I00) and Gobierno de Aragón-FSE(LMP93_21 and E47_23R). INMA authors acknowledge grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033. JMM acknowl-edges MICIN/AEI his FPI PhD grant. Authors would like to acknowledgethe use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza, NAMBIOSIS and ELECMI-Laboratorio de Microscopías Avanzadas-LMA (INMA-Unizar) and Servicios Científicos Técnicos ofCEQMA (CSIC-Unizar). The authors would also like to thank Dr. P.Romero for her invaluable guidance in the NMR studies. CSIC-ConexiónNanomedicina is also acknowledged., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bound polariton states in the Dicke–Ising model

  • Román-Roche, Juan
  • Gómez-León, Álvaro
  • Luis, Fernando
  • Zueco, David
We present a study of hybrid light–matter excitations in cavity QED materials using the Dicke–Ising model as a theoretical framework. Leveraging linear response theory, we derive the exact excitations of the system in the thermodynamic limit. Our results demonstrate that the cavity can localize spin excitations, leading to the formation of bound polaritons, where the cavity acts as an impurity of the two-excitation band, localizing spin-wave pairs around single-spin domains. We derive the condition for the existence of these bound states and discuss its satisfiability in different regimes. Finally, we show that these effects persist in finite systems using exact-diagonalization calculations., TED2021-131447B-C21 funded by MCIN/AEI/10.13039/501100011033 and the EU “NextGenerationEU”/PRTR CEX2023-001286-S financed by MICIU/AEI/10.13039/501100011033. The Gobierno de Aragón (Grant E09-17R Q-MAD), Quantum Spain and the CSIC QuantumTechnologies PlatformPTI-001. JRR acknowledge ssupport from the Ministry of Universities of theSpanish Government through the grant FPU2020-07231., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication of α-Fe2O3 nanoparticles/g-C3N4 direct Z-scheme heterojunction of durable photocatalytic activity

  • Galán, Alejandro
  • Fernández-Pato, Isaías
  • Zaluzec, Nestor J.
  • Cambré, Sofie
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
The fabrication of a nanohybrid photocatalyst that combines α-Fe2O3 nanoparticles with graphitic carbon nitride (g-C3N4) is reported. The ensuing direct Z-scheme heterojunction greatly boosts the photocatalytic activity of the α-Fe2O3/g-C3N4 nanohybrids. This results in organic dye degradation rates more than two times higher than its individual components, promoted by the efficient charge separation and transfer of the Z-scheme heterojunction mechanism of the nanohybrid photocatalyst. In addition, recyclability tests show an outstanding stability of the nanohybrids spanning five consecutive dye degradation experiments, during which the degradation rate is slightly improved. The origin of the improved photocatalytic performance of the nanohybrid lies in the intimate interaction between α-Fe2O3 and g-C3N4 afforded by the two-step fabrication process, which enables the direct and controlled growth of α-Fe2O3 nanoparticles on g-C3N4. A first ultrasound impregnation step promotes the effective anchoring of stable Fe species via Fe−N and C−N/C−O bonding, while a second microwave phase conversion step induces the subsequent growth of α-Fe2O3 nanoparticles on the g-C3N4 sheets. Careful control of the FeCl3 precursor concentration up to a threshold value of 0.25 M during impregnation enables complete control over their size and phase. This approach clearly highlights the benefits of microwave reactor systems in the fabrication of hematite-based Z-scheme photocatalytic, overcoming the limitations of conventional thermal treatment technology., Funding from Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grant PID2022-139671OB-I00, as well as from the Gobierno de Aragón (DGA) under projects T03_23R (Grupos de Investigación Reconocidos), is acknowledged. A.G.-G. is thankful for his Margarita Salas Postdoctoral Fellowship grant (RSU.UDC.MS21). R.A. acknowledges funding by the Spanish MICIU (PID2019-104739GB-I00/AEI/10.13039/501100011033, PID2023-151080NB-I00/AEI/10.13039/501100011033, and CEX2023-001286-S MICIU/AEI/10.13039/501100011033) and by DGA under project E13-23R. The work at Argonne National Laboratory (N.J.Z./R.A.) was supported by the Advanced Materials for Energy Water Systems (AMEWS) Center, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences at Argonne National Laboratory under contract DE-AC02-06CH11357, as well as in part by the National Science Foundation Major Research Instrumentation (MRI) Program (NSF DMR-2117986) at the University of Chicago. The Argonne Picoprobe AEM was developed under CRADA 1300701 between Argonne National Laboratory and Thermo Fisher Scientific Instruments. S.C. thanks the Fund for scientific research - Flanders (FWO) for infrastructure funding for the EPR equipment (I004920N)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information for Fabrication of α-Fe2O3 nanoparticles/g-C3N4 direct Z-scheme heterojunction of durable photocatalytic activity [Dataset]

  • Galán, Alejandro
  • Fernández-Pato, Isaías
  • Zaluzec, Nestor J.
  • Cambré, Sofie
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
Under a Creative Commons BY 4.0 license., Detailed structural information obtained from XRD and Rietveld refinement of the hybrids, UV−vis spectra of all the as-prepared photocatalysts, FESEM images of the control and hybrid photocatalysts, schematic of the g-C3N4 cleavage and impregnation, additional XPS spectra of α-Fe2O3 NPs and α-Fe2O3/g-C3N4 hybrid, additional degradation experiments, and table comparing the photocatalytic activity of different material systems., S1. X-ray diffraction Figure S1. XRD pattern of the (1 0 0) peak of g-C3N4 and hybrid materials. Table S1. Crystallographic parameters of hematite NPs and hybrid materials. S2. UV-vis absorption spectroscopy Figure S2. UV-vis spectra of the reference and hybrid materials. S3. XPS of Fe 2p core spectra Figure S3. Fe 2p XPS spectra of α-Fe2O3 NPs and α-Fe2O3/g-C3N4 hybrid. S4. Cleavage and impregnation of g-C3N4 Figure S4. Schematic of the cleavage and impregnation process of the g-C3N4 sheets. S5. High resolution FESEM Figure S5. High-resolution FESEM micrographs of α-Fe2O3 NPs, g-C3N4 and hybrids. S6. Additional photocatalytic MB degradation results Figure S6. Effect of H2O2 and UV light on MB degradation. Figure S7. Comparison between UV and white ligh on MB degradation. Figure S8. MB degradation using different concentrations of photocatalyst. Figure S9. Comparative degradation of MB, RhB and MR. Figure S10. XRD analysis of the photocatalyst after recycling experiment. Figure S11. UV-vis spectra of time-dependent MB degradation. S7. Comparative table Table S2. Comparison of the photocatalytic activity and degradation time employing different material systems and experimental conditions. S8. References., Funding from Spanish MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” under project grant PID2022-139671OB-I00, as well as from the Gobierno de Aragón (DGA) under projects T03_23R (Grupos de Investigación Reconocidos), is acknowledged. A.G.-G. is thankful for his Margarita Salas Postdoctoral Fellowship grant (RSU.UDC.MS21). R.A. acknowledges funding by the Spanish MICIU (PID2019-104739GB-I00/AEI/10.13039/501100011033, PID2023-151080NB-I00/AEI/10.13039/501100011033, and CEX2023-001286-S MICIU/AEI/10.13039/501100011033) and by DGA under project E13-23R. The work at Argonne National Laboratory (N.J.Z./R.A.) was supported by the Advanced Materials for Energy Water Systems (AMEWS) Center, an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences at Argonne National Laboratory under contract DE-AC02-06CH11357, as well as in part by the National Science Foundation Major Research Instrumentation (MRI) Program (NSF DMR-2117986) at the University of Chicago. The Argonne Picoprobe AEM was developed under CRADA 1300701 between Argonne National Laboratory and Thermo Fisher Scientific Instruments. S.C. thanks the Fund for scientific research - Flanders (FWO) for infrastructure funding for the EPR equipment (I004920N)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A highly-active chemodynamic agent based on in situ generated copper complexes from copper hexacyanoferrate nanoparticles

  • Bonet-Aleta, Javier
  • Hueso, José L.
  • Valls-Chivas, Ángeles
  • Ruiz-Aranda, Iris
  • Manzanilla, Brenda
  • García-Peiro, José I.
  • Aina, Sergio
  • Urriolabeitia, Esteban P.
  • Alegre-Requena, Juan V.
  • Santamaría, Jesús
Copper hexacyanoferrate (Cu2Fe(CN)6) nanocubes with a homogeneous size under 100 nm are synthesized by self-assembly from Cu2+ and Fe(CN)6 3- precursors. Similar to previous reports with catalysts containing Cu and Fe, the objective is to produce a nanoparticle catalyst that can promote glutathione (GSH) oxidation thanks to the Cu contribution, plus some ROS production through Fenton-like processes fostered by Fe. Unexpectedly, the catalytic activity for GSH oxidation are much higher (≈50%) than those obtained with equal Cu amounts provided as CuCl2. Furthermore, in the presence of GSH concentrations characteristic of the tumor microenvironment, the nanocubes disassembled homogeneously, without a noticeably change of composition. These results suggest that this strong increase of catalytic activity arises from synergistic coordination of the released Cu2+ and Fe(CN)6 3- ions that facilitate GSH deprotonation, accelerating its oxidation. Given the role of GSH in the nanoparticle disassembly process, a selective action of the catalyst can be obtained: lethal doses as low as 18 ppm of Cu are obtained for U251-MG cancer cells while healthy fibroblasts are largely spared., The authors would like to acknowledge the European Research Council (ERC) for funding the Advanced Grant agreement Catalytic Dual-Function Devices Against Cancer (CADENCE) project number 742684. Severo Ochoa funds (CEX2023-001286-S acknowledged by MICIU/AEI /10.13039/501100011033. J.B.-A. acknowledges Herchel–Smith Fund for postdoctoral financial support. The synthesis of materials has been performed by the Platform of Production of Biomaterials and Nanoparticles of the NANOBIOSIS ICTS, more specifically by the Nanoparticle Synthesis Unit (Unit 9) of the CIBER in Bioengineering, Biomaterials & Nanomedicine (CIBER-BBN). J.V.A.-R. acknowledges Gobierno de Aragón-Fondo Social Europeo (Research Groups E07_23R) and the State Research Agency of Spain (MCIN/ AEI/ 10.13039/501100011033/ FEDER, UE) for financial support (PID2022-140159NA-I00). The study was also partly supported by the Aragon Government via Research Groups T57_23R., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A triangular frustrated Eu(II)-organic framework for sub-kelvin magnetic refrigeration

  • Manvell, Anna S.
  • Dunstan, Maja A.
  • Gracia, David
  • Hrubý, Jakub
  • Kubus, Mariusz
  • McPherson, James N.
  • Palacios, Elias
  • Weihe, Høgni
  • Hill, Stephen
  • Schnack, Jürgen
  • Evangelisti, Marco
Attaining sub-Kelvin temperatures remains technologically challenging and often relies on the scarce resource 3He, unless employing adiabatic demagnetization refrigeration. Herein, the active coolant typically consists of weakly coupled paramagnetic ions, whose magnetic interaction strengths are comparable in energy to the relevant temperature regime of cooling. Such interactions depend strongly on inter-ion distances, fundamentally hindering the realization of dense coolants for sub-Kelvin refrigeration. We present a magnetically concentrated triangular coordination network, Eu0.9Ba0.1I2(pyrazine)3, featuring the large s = 7/2 moment of Eu(II). Electron paramagnetic resonance, magnetization, and heat capacity measurements reflect antiferromagnetic correlations between the Eu(II) ions and a dominant easy-plane magnetic anisotropy. The ensuing geometric frustration prevents entropy-annihilating magnetic order down to at least 0.17 K. This remarkably low operational temperature for a low-dimensional, molecule-based magnetic refrigerant opens possibilities for on-chip cryogenic refrigeration, especially in scenarios where established inorganic refrigerants cannot be utilized., K.S.P. thanks the VILLUM Foundation for a VILLUM Young Investigator+ (42094) grant, the Independent Research Fund Denmark for a DFF-Sapere Aude Starting grant (no. 0165-00073B), and the Carlsberg Foundation for a research infrastructure grant (no. CF17-0637). Work performed at the National High Magnetic Field Laboratory is supported by the US National Science Foundation (DMR-2128556) and the State of Florida. D.G., E.P. and M.E. thank MICIU/AEI/10.13039/501100011033 and ERDF/UE (PID2021-124734OB-C21, CEX2023-001286-S) and Gobierno de Aragón (E11-23R, E12-23R). D.G. acknowledges financial support from the Gobierno de Aragón through a doctoral fellowship., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Continuous exfoliation of 2H-MoS2 in a microwave-heated microfluidic contactor

  • Quirós‐Ovies, Ramiro
  • Martín Sabanés, Natalia
  • García-Pérez, Cristina
  • Bernardo-Gavito, Ramón
  • Granados, Daniel
  • Pérez, Emilio M.
  • Santamaría, Jesús
  • Sebastián, Víctor
Microwave (MW)-assisted exfoliation of molybdenum disulfide (MoS2) has been demonstrated to produce exceptionally large area (in the µm2 range), ultrathin (< 4 layers) flakes operating in the batch mode. Here, we develop a continuous system capable of producing few-layer MoS2 flakes of similar quality to those obtained through the batch procedure but with enhanced efficiency and scalability. The proposed microfluidic-based method introduces a controlled, stable, and reproducible process for exfoliating MoS2 in a liquid medium. By optimizing parameters such as flow rate, channel geometry, power of the MW heating and solvent selection, we were able to consistently achieve flake sizes in the µm range and thicknesses below 6 nm, comparable to those obtained via batch MW exfoliation. The continuous nature of the system allows for scalable production, addressing one of the major limitations of batch processes. While developed for MoS2 flakes, it can be translated to any two-dimensional (2D) material with suitable microwave-absorbing properties, potentially paving the way for the continuous production of a wide variety of large-area ultrathin flakes., The authors acknowledge MINECO (CTQ2017-86060-P and PID2020-116661RB-I00(E.M.P.)), 2021-127847OB-I00 MCIN/AEI/10.13039/ 501100011033 and PDC2022-133866-I00 MCIN/AEI/10.13039/501100011033 (Unión Europea Next GenerationEU/PRTR), the Comunidad de Madrid (MAD2D-CM PRTR-CM PR47/21 (E.M.P.). INMA and IMDEA Nanociencia acknowledges support from the Severo Ochoa Programme for Centres of Excellence in R&D “Ayuda CEX2023-001286-S financiada por MICIU/AEI /10.13039/501100011033” and (CEX2020-001039-S), respectively. We also thank CIBER-BBN, an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III and by Fondo Europeo de Desarrollo Regional (Feder) “Una manera de hacer Europa”, with the assistance of the European Regional Development Fund. LMA-ELECMI and NANBIOSIS ICTs are gratefully acknowledged., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Copper-based nanoplatforms and their role in cancer therapy

  • García-Peiro, José I.
  • Bonet-Aleta, Javier
  • Hueso, José L.
Copper plays both an essential and potentially hazardous role for living systems. This assertion coupled with emerging evidences highlighting the pivotal role of copper in cancer progression, set the basis for advancing copper-based therapies in oncology. In the presence of copper nanostructures, the rules and mechanisms applying within cells to respond and regulate copper levels differ significantly from those governing copper in its ionic state. These different behaviors can be exploited by Nanotechnology to develop new therapeutic strategies against cancer. In this review, we focus on three of these scenarios: (i) disrupt the copper equilibrium either by artificially overloading copper in cancer cells, or depleting the indispensable endogenous copper required by cancer cells; (ii) leverage the synergy between copper nanostructures and other therapies, such as chemo–, radio– and photothermal therapy; (iii) describe the tools currently existing or under development to map and track copper nanostructures which are utilized in therapy, since they have the potential to unveil new cancer cell vulnerabilities. Finally, we elucidate the future pathways and obstacles facing nano‑copper therapy in each particular section, highlighting the scientific complexities and practical challenges essential for its successful transition into clinical practice., The authors would like to acknowledge Ayuda CEX2023-001286-S funded by MICIU/AEI /10.13039/501100011033. The authors also thank funding from the Government of Aragon (Group T57_23R)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dendritic platinum nanoparticles shielded by Pt-S PEGylation as intracellular reactors for bioorthogonal uncaging chemistry

  • García-Peiro, José I.
  • Ortega-Liébana, M. Carmen
  • Adam, Catherine
  • Lorente-Macías, Álvaro
  • Travnickova, Jana
  • Patton, E. Elizabeth
  • Guerrero-López, Paula
  • García-Aznar, José Manuel
  • Hueso, José L.
  • Santamaría, Jesús
  • Unciti-Broceta, Asier
Beyond their classical role as cytotoxics, Platinum (Pt) coordination complexes recently joined the selected group of transition metals capable of performing bioorthogonal reactions in living environments. To minimize their reactivity towards nucleophiles, which limit their catalytic performance, we investigated the use of Pt(0) with different forms, sizes and surface functionalization. We report herein the development of PEGylated Pt nanodendrites with the capacity to activate prodyes and prodrugs in cell culture and in vivo. Their dendritic morphology together with their surface shielding through Pt-S-bonded PEGylation synergistically contributed to create catalytic nanoreactors compatible with the highly-crowded and reductive environment of the cell cytoplasm, thereby facilitating in situ bioorthogonal drug uncaging in cancer cells in 2D and 3D culture, including in microfluidic systems, and xenografted in zebrafish., We are grateful to the EC (H2020-MSCA-IF-2018-841990) and EPSRC (EP/S010289/1) for financial support. We also would like to acknowledge the European Research Council (ERC) through the Catalytic Dual-Function Devices Against Cancer (CADENCE-742684) project, RLDI/2015-021. EEP is funded by the MRC (MC_UU_00035/13), Melanoma Research Alliance and Rosetrees Trust (MRA Awards 687306, 917226). This work was supported by the Cancer Research UK Scotland Centre (CTRQQR-2021\100006). MCOL is grateful to the Institute of Genetics and Cancer (IGC) for financial support through the Hastie Career Advancement Fund 2020, and the Consejeria de Universidad Investigacion e Innovacion by ERDF Andalusian Program 2021–2027 (A-EXP-278-UGR23). We thank IGC Zebrafish facility for supporting zebrafish management and IGC Imaging Facility for their support with imaging experiments. P.G.-L. gratefully acknowledges the support of the Government of Aragon (Grant No. 2021–25). The synthesis of materials has been performed by the Platform of Production of Biomaterials and Nanoparticles of the NANBIOSIS ICTS, more specifically by the Nanoparticle Synthesis Unit of the CIBER in BioEngineering, Biomaterials & Nanomedicine (CIBER-BBN). The TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia y Materiales de Aragon, Universidad de Zaragoza, Spain. (SAI and ELECMI). Ayuda CEX2023-001286-S financiada por MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dodecanuclear [NiII8Ln4] clusters and rings of corner-sharing {NiII2Ln2} cubanes (Ln = Dy, Gd, Y); magnetic and magnetothermal properties

  • Tziotzi, Thomais G.
  • Agapaki, Eleftheria
  • Charkiolakis, Emmanouil K.
  • Gracia, David
  • Cervera, Marc Ubach I.
  • Dalgarno, Scott J.
  • Evangelisti, Marco
  • Brechin, Euan K.
  • Milios, Constantinos J.
The solvothermal reaction of NiCl2·6H2O with 1,3,5-tri(2-hydroxyethyl)-1,3,5-triazacyclohexane, LH3, and Ln(OAc)3·4H2O in the presence of salicylaldehyde in MeOH leads to the formation of the dodecanuclear isostructural species [NiII8Ln4(L')8(OAc)4(OH)8(H2O)4]·xH2O (Ln = Dy, x = 6 (1); Gd, x = 24 (2); Y, x = 10 (3); L' = the dianion of the Schiff-base resulting from the reaction of salicylaldehyde and ethanolamine). The metallic core of the clusters describes a ring of corner-sharing {Ni2Ln2} cubanes assembled on a central, planar rectangular {Ln4} unit. Magnetization studies conducted on complexes 1-3 demonstrate the presence of dominant ferromagnetic exchange at low temperatures, which is largely attributed to the Ni⋯Ni interactions. The significant magnetocaloric effect observed in the Gd analogue has been assessed through heat capacity and magnetization measurements., This work has received support from EU (MSCA-DN MolCal, 101119865), MICIU/AEI/10.13039/501100011033/ and ERDF/EU (PID2021-124734OB-C21, CEX2023-001286-S), Gobierno de Aragón (E11-23R, E12-23R). CJM and TGT would like to thank the National Recovery and Resilience Plan Greece 2.0 (Award Number TAEDR-0535821), funded by the European Union – NextGenerationEU., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Drug delivery applications of hydrophobic deep eutectic solvent-in-water nanoemulsions: A comparative analysis of ultrasound emulsification and membrane-assisted nanoemulsification

  • Syed, Usman T.
  • Calzada-Funes, Javier
  • Mendoza, Gracia
  • Arruebo, Manuel
  • Piacentini, Emma
  • Giorno, Lidietta
  • Crespo, João G.
  • Brazinha, Carla
  • Sebastián, Víctor
The emergence of green chemistry and engineering principles to enforce sustainability aspects has ensured the prevalence of green solvents and green processes. Our study addresses this quest by exploring drug delivery applications of hydrophobic deep eutectic solvents (DESs) which are alternative green solvents. Initially, this work showcases the hydrophobic drug solubilization capabilities of a natural hydrophobic DES, menthol, and decanoic acid. To consider biomedical applications wherein polar media are encountered, this work further demonstrates the potential drug delivery application of these systems by encapsulating the anti-inflammatory local anesthetic lidocaine in hydrophobic DES-in-water nanoemulsions. NMR studies confirm the high solubility of the hydrophobic drug in hydrophobic DES comprising menthol and decanoic acid (1:2 molar ratio). Ultrasound emulsification and energy-efficient membrane emulsification techniques were employed to disperse 4% (v/v) DES into a 2% (w/w) Tween 20 surfactant aqueous solution. An isoporous microengineered membrane (nominal pore size ∼ 9 μm) was used to produce lidocaine-loaded DES-based nanoemulsions. Such membrane-assisted nanoemulsification was possible because the hydrophobic DES exhibits relatively low interfacial tension with the continuous phase and acts as a cosurfactant. Moreover, increased concentrations of lidocaine within the DES resulted in a further decrease in the interfacial tension and a lower melting point. Among the kinetic models analyzed to evaluate the release of lidocaine encapsulated in hydrophobic DES-in-water nanoemulsions, the Korsmeyer-Peppas kinetic model provided the best fit. The release constant "n" of <0.5 indicates that the drug release mechanism is predominantly governed by diffusion. Additionally, cytotoxicity against various human cell lines demonstrated the nanoemulsion's potential for anti-inflammatory drug delivery applications. Consequently, the nanoemulsion of DES presents a promising solution for the effective loading and delivery of poorly soluble drugs. This innovative approach enhances drug solubility and bioavailability, providing a versatile platform for controlled drug release. By leveraging the advantages of nanoemulsion technology, our study underscores the potential of DES-based formulations to promote drug delivery systems across a variety of therapeutic applications., The authors would like to acknowledge the Executive Agency for Education, Audiovisual, and Culture (EACEA) of the European Commission for the scholarship grant of Erasmus Mundus Doctorate in Membrane Engineering (EUDIME) program to Syed Usman Taqui. Prof. Reyes Mallada and Dr. Ruth Lahoz from the Nanoscience Institute of Aragon (INA), University of Zaragoza, are acknowledged for their unconditional support in fabrication and characterization of metallic membranes. This work was also supported by the Associate Laboratory for Green Chemistry-LAQV which is financed by national funds from FCT/MCTES (UIDB/50006/2020). V.S. acknowledges the financial support by the Spanish Ministry of Science and Innovation (grant no. PID2021-127847OB-I00). We also acknowledge the financial support of the NextGenerationEU/PRTR thanks to the project: PDC2022-133866-I00. CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011, Iniciativa Ingenio 2010, Consolider Program. G.M. gratefully acknowledges the support from the Miguel Servet Program (MS19/00092; Instituto de Salud Carlos III). INMA researchers thank the Severo Ochoa Grant CEX2023-001286-S funded by MICIU/ AEI/10.13039/501100011033. Authors thank the “Advanced Microscopy Laboratory” ELECMI and NANBIOSIS ICTSs, for access to their instruments. Part of the work was supported within the Bio4Mem project (CNR-DCM.AD006.234)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamical disorder in the mesophase ferroelectric HdabcoClO4: A machine-learned force field study

  • Dypvik Sødahl, Elin
  • Carrete, Jesús
  • Madsen, Georg K.H.
  • Berland, Kristian
Hybrid molecular ferroelectrics with orientationally disordered mesophases offer significant promise as lead-free alternatives to traditional inorganic ferroelectrics owing to properties such as room temperature ferroelectricity, low-energy synthesis, malleability, and potential for multiaxial polarization. The ferroelectric molecular salt HdabcoClO4 is of particular interest due to its ultrafast ferroelectric room-temperature switching. However, so far, there is limited understanding of the nature of dynamical disorder arising in these compounds. Here, we employ the neural network NeuralIL to train a machine-learned force field (MLFF) with training data generated using density functional theory. The resulting MLFF-MD simulations exhibit phase transitions and thermal expansion in line with earlier reported experimental results, for both a low-temperature phase transition coinciding with the orientational disorder of ClO4– and the onset of rotation of both Hdabco+ and ClO4– in a high-temperature phase transition. We also find proton transfer even in the low-temperature phase, which increases with temperature and leads to associated proton disorder as well as the onset of disorder in the direction of the hydrogen-bonded chains., Work by EDS and KB supported by the Research Council of Norway as a part of the Young Research Talent project FOX (302362). The computations were carried out on UNINETT Sigma2 high-performance computing resources (grant NN9650K). This study was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) promoted by the Government of Aragon. J.C. acknowledges funding from MICIU/AEI (DOI: 10.13039/501100011033) through grant CEX2023-001286-S., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of shell thickness on the oxygen evolution activity of Core@shell Fe3O4@CoFe2O4 nanoparticles

  • Makarchuk, Iryna
  • Rotonnelli, Benjamin
  • Royer, Lisa
  • Hettler, Simon
  • Gallet, Jean-Jacques
  • Bournel, Fabrice
  • Guehl, Julie
  • Brige, Amandine
  • Zitolo, Andrea
  • Kéranguéven, Gwénaëlle
  • Bonnefont, Antoine
  • Arenal, Raúl
  • Savinova, Elena
  • Asset, Tristan
  • Pichon, Benoit P.
Hydrogen production via water splitting requires efficient electrocatalysts to reduce the overpotential of the anodic oxygen evolution reaction (OER) and cathodic hydrogen evolution reaction (HER). In this study, we investigated the influence of apparent shell thickness on the electrocatalytic activity of Fe3O4@CoFe2O4 core@shell nanoparticles, an efficient noble metal-free OER catalyst in alkaline media. Three different types of core@shell nanoparticles were synthesized by the seed-mediated crystal growth of cobalt ferrite on pristine magnetite nanoparticles. The synthesis conditions were adapted to modulate the shell structure. Importantly, all proposed core@shell structures showed excellent stability during electrochemical testing, which is important for eventual industrial applications. We showed that the electrocatalytic performance of Fe3O4@CoFe2O4 core@shell nanoparticles was significantly influenced by the shell structure. The cooperative redox mechanism proposed to be the origin of the activity enhancement in core@shell nanoparticles was investigated by using in situ soft X-ray absorption spectroscopy (XAS). XAS revealed that cooperative redox interactions occurred between Co(II) and Fe(II) residing in close proximity at the core/shell interface, hence requiring a thin and continuous CoFe2O4 shell. Overall, this study provides insights into the design of efficient core@shell nanocatalysts for the OER, offering a path toward improving the performance of earth-abundant transition metal-oxide (TMO) catalysts for sustainable H2 production., This work was supported under the framework of the IdEx University of Strasbourg. R.A. and S.H. acknowledge funding from the Spanish MICIU (PID2019-104739GB-100/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI/10.13039/501100011033) and Gobierno de Aragón (DGA) under project E13-23R. STEM imaging and spectroscopic (EELS) studies were conducted at the Laboratorio de Microscopias Avanzadas (LMA) at the Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrical gating based on ion and electron beam irradiation of PdAc films: Application to superconducting nanowires

  • Salvador-Porroche, Alba
  • Herrer, Lucía
  • Sangiao, Soraya
  • Cea, Pilar
  • Teresa, José María de
Focused ion beam (FIB) is a nanopatterning technique commonly used for material removal, but in combination with a precursor material it gives rise to additive nanomanufacturing, of great interest in nanotechnology and semiconductor applications. The precursor material can be delivered onto the substrate either in the gas form, through a gas-injection system, or in thin-film form, through spin coating. Recently, it has been found that the electrical resistance of spin-coated PdAc organometallic films submitted to FIB irradiation can be metallic at an optimized ion dose, without the need of any post-processing purification step. On the other hand, if such PdAc films are submitted to low-dose focused electron beam irradiation (FEB), they become an insulating material. Here, we combine the use of FIB and FEB irradiation to produce (additively) micro- and nano-structured materials that act as gates in electronic devices. Three different gate configurations have been explored and applied to suppress superconductivity in metallic nanowires through electric-field effects, including lateral and top gating. This new fabrication technique for investigation of electrical gating effects at the micro- and nano-scales stands out by its precision and resolution (due to the use of focused charged beams), by the absence of sacrificial resist layers, and by the process speed., The authors thank the Gobierno de Aragón through the grant numbers E13_23R and E31_23R, the networks NANOLITO (RED2022-134096-T) and FIT4NANO (COST action CA19140), and the grants PID2020-11223914RB-I00, PID2023-146451OB-I00, PDC2023-145810-I00, PID2022-141433OB-I00, TED2021-131318B-I00 and Ayuda CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR. Authors acknowledge the use of the facilities as well as the technical advice provided by the National Facility ELECMI ICTS, node «Laboratorio de Microscopias Avanzadas (LMA)» at «Universidad de Zaragoza». This research work has been funded by the European Commission –NextGenerationEU (Regulation EU 2020/2094), through CSIC's Quantum Technologies Platform (QTEP)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing CO2/CH4 separation performance in PIM-1 based MXene nanosheets mixed matrix membranes

  • Yahia, Mohamed
  • Refaat, Dalia
  • Coronas, Joaquín
  • Téllez, Carlos
This study presents an approach by integrating MXene nanosheets (Ti2C3Tx) into polymer of intrinsic microporosity (PIM-1) matrix to develop mixed matrix membranes (MMMs) for biogas upgrading. Different concentrations (1–5 wt%) of MXene were incorporated into PIM-1, and the resulting materials were characterized to 1H NMR, FTIR, XRD, TGA, nitrogen adsorption, SEM and EDS to assess their physicochemical properties. The research focused on evaluating the gas separation performance, particularly CO2/CH4 separation, as well as the aging behavior of the MMMs. The incorporating of MXene nanosheets significantly enhanced the CO2 permeability and selectivity of PIM-1 by enhancing gas solubility and diffusivity. The most promising results were observed at 5 wt% filler loading, achieving a 13.5 CO2/CH4 separation selectivity at 7652 Barrer of CO2 permeability. In all membranes with aging time (60 days), there was a decrease in CO2 permeability and a slight increase in CO2/CH4 selectivity, observing that the introduction of MXene slightly mitigates the physical aging process in the PIM-1 polymer. Additionally, the permeability tests revealed higher CO2 permeability and (CO2/CH4) selectivity values for mixed gases compared to single gases. Overall, the study highlights the potential of MXene/PIM-1 MMMs as effective materials for CO2/CH4 separation, outperforming pristine PIM-1., This recent investigation is acknowledging the grants: 1. PID2019-104009RB-I00 (funded by MICIU/AEI/10.13039/501100011033/), 2. PID2022-138582OB-I00 (funded by MICIU/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”), 3. TED2021-130621B-C4 (funded by MICIU/AEI/10.13039/501100011033/ and The “European Union Next-Generation-EU/PRTR”), 4. CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033. M. Yahia's is supported through “the María Zambrano program” funded by both “the European Union's Next-Generation-EU” and “the Spanish Ministerio de Universidades”. Financial assistance from “the Government of Aragón (T68_23R)” is also recognized. Furthermore, technical guidance and instrumentation provided by “the Universidad de Zaragoza/UNIZAR” through “the national facility ELECMI ICTS”, “the Servicio General de Apoyo a la Investigación-SAI”, and “Laboratorio de Microscopías Avanzadas”, are appreciated., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing electrical properties in CaMnO3-based ceramics: The impact of single doping with different elements

  • Amirkhizi, Parisa
  • Madre, M. A.
  • Constantinescu, Gabriel
  • Torres, M. A.
  • Sotelo, Andres
  • Kovalevsky, Andrei V.
  • Rasekh, Shahed
This study explores the effect of single doping with different rare earth elements (Y, La, and Yb) on the structural, morphological and electrical properties of CaMnO3 bulk ceramics, aiming to improve their thermoelectric performance. Ca(1-x)RxMnO3 (R = Y, La, Yb; x = 0, 0.05, 0.10) samples were synthesized via a solid-state reaction. XRD analysis confirmed the thermoelectric CaMnO3 phase as the major one, with orthorhombic perovskite structure. Small amounts of secondary phases (CaMn2O4 and Mn2O3) were also detected in some doped samples. The addition of dopants influenced the unit cell parameters, producing a shift to lower 2θ angles, confirming their incorporation into the ceramic structure. SEM micrographs revealed a significant reduction in grain size upon doping. Electrical resistivity measurements showed a metallic behavior for all doped samples. The Y-doped samples exhibited the highest resistivity values while the Yb-doped samples showed the lowest values (6.8 mΩ cm for the 0.10 doped one), which are among the lowest found in literature for this compound. The Seebeck coefficient values show minor changes for 0.05 doped samples when they decreased with increasing concentration of dopant. Consequently, the highest values were observed for 0.05-doped sample (−215 µV/K), independently of the dopant. This value is much higher than the ones typically reported in the literature. The highest value of the power factor was calculated for the 0.05 Yb doped sample, reaching approximately 0.56 mW/K2·m at 800°C. This value is higher than the best presented in the literature for this compound, to the best of our knowledge, and suggests that Yb3+ doping greatly enhances the high-temperature thermoelectric performance of bulk CaMnO3 ceramics, making it a promising dopant for high-efficiency thermoelectric materials., The authors wish to thank the Gobierno de Aragón (Grupo de Investigacion T54_23R) for financial support. Sh. Rasekh acknowledges the support of the Research Employment Contract FCT–CEECIND/02608/2017. This work was also developed within the scope of the PhD project of P. Amirkhizi (grant 2020.08051.BD funded by FCT) and the project CICECO-Aveiro Institute of Materials, UIDB/50011/2020 (DOI 10.54499/UIDB/50011/2020), UIDP/50011/2020 (DOI 10.54499/UIDP/50011/2020), and LA/P/0006/2020 (DOI 10.54499/LA/P/0006/2020), financed by national funds through the FCT/MCTES (PIDDAC). Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. This article was supported by the projects UIDB/00481/2020 and UIDP/00481/2020—Fundação para a Ciência e a Tecnologia, DOI 10.54499/UIDB/00481/2020 (https://doi.org/10.54499/UIDB/00481/2020) and DOI 10.54499/UIDP/00481/2020 (https://doi.org/10.54499/UIDP/00481/2020). Gabriel Constantinescu acknowledges the support of the TEOsINTE project (Grant agreement ID: 101003375), funded under the H2020-EU.4. Programmes (Funding Scheme: MSCA-IF-EF-ST—Standard EF). M. A. Madre, M. A. Torres, and A. Sotelo acknowledge the grant CEX2023-001286-S funded by MICIU/AEI /10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing thermoelectric performance of CaMnO3 through a Y- and La- dual-doping strategy

  • Amirkhizi, Parisa
  • Madre, M. A.
  • Dura, Oscar J.
  • Torres, M. A.
  • Sotelo, Andres
  • Kovalevsky, Andrei V.
  • Rasekh, Shahed
A classical ceramic route has been used in this work to prepare Y and La co-doped CaMnO3 thermoelectric compound seeking to improve its thermoelectric properties. The study highlights significant improvements in electrical and thermal transport properties achieved with minimal doping levels and a cost-effective synthesis process. The co-doping strategy effectively reduced electrical resistivity (reaching 10.8 mΩ cm at 800 °C for 0.03 (Y, La)-doped samples) while maintaining a relatively high Seebeck coefficient (300 μV/K at 800 °C for 0.01 (Y, La)-doped samples). Moreover, the thermal conductivity was minimized (1.65 W/(K m) at 800 °C for 0.03 (Y, La)-doped samples), leading to outstanding thermoelectric performance, with 0.47 mW/(K2m) power factor, and 0.25 ZT values at 800 °C (for 0.01 (Y, La)-doped samples. These results are among the best values reported so far for this family of compounds, underscoring the potential of this material for high-temperature thermoelectric applications and the efficiency of the classical ceramic approach with reduced dopant usage., The authors wish to thank the Gobierno de Aragón (Grupo de Investigacion T54_23R) and Universidad de Zaragoza (UZ2022-IAR-09) for financial support. Sh. Rasekh acknowledges the support of the Research Employment Contract FCT–CEECIND/02608/2017. This work was also developed within the scope of the PhD project of P. Amirkhizi (grant 2020.08051. BD funded by FCT) and the project CICECO-Aveiro Institute of Materials, UIDB/50011/2020, UIDP/50011/2020 & LA/P/0006/2020, financed by national funds through the FCT/MCTES (PIDDAC). M. A. Madre, M. A. Torres, and A. Sotelo acknowledge the grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring the magnetic percolation threshold in the improper ferroelectric Sr3Sn2O7 upon Cr and Fe-doping

  • Blasco, Javier
  • Cuartero, Vera
  • Lafuerza, Sara
  • Gracia, David
  • Rodríguez-Velamazán, J. A.
  • Puente-Orench, Inés
  • Subías, Gloria
We examine the effect of Fe and Cr substitutions at the Sn site on the magnetic properties of the hybrid improper ferroelectric Sr3Sn2O7. Upon co-doping with La to preserve the electric charge balance in the unit cell, the Sr3-xLaxSn2-xCrxO7, Sr3-xLaxSn2-xFexO7 and Sr2LaSnFe1-yCryO7 series can be obtained as single phases up to x = 1 and for all y values. The unit cell volume is isotropically reduced with doping, so that the orthorhombic structure is preserved. However, these substitutions strongly destabilize the ferroelectric order by decreasing the transition temperature, TFE, below room temperature for x ≥ 0.25. La/Cr co-doping is unable to induce long-range magnetic and compositions from this series behave as conventional paramagnetic compounds; although for high doping concentration (x ≥ 0.5), the significant deviations from the Curie law at low temperatures suggest the onset of antiferromagnetic correlations. In the case of La/Fe co-doping, all samples show strong antiferromagnetic correlations, but a spin glass-like behavior is observed for x ≈ 1 compounds. Finally, no long-range magnetic ordering is observed in La/Cr-Fe co-doped samples, but at the same time an increase in spontaneous magnetization is seen at low temperature, which is associated with the presence of competitive magnetic interactions, in particular the Fe-O-Cr superexchange ferromagnetic interaction. The lack of long-range magnetic order in the investigated series of Cr/Fe-doped Sr3Sn2O7, indicates that the critical concentration of magnetic atoms necessary to overcome the magnetic percolation threshold exceeds the 50 % in magnetic cations in these bilayered Ruddlesden-Popper perovskites., This work has been supported by MICIU/AEI/10.13039/501100011033/FEDER, UE (PID2021-124734OB-C21, CEX2023-001286-S) and Diputación General de Aragón (E11-23R, E12-23R). D. G. acknowledges financial support from the Gobierno de Aragón through a doctoral fellowship. Authors would also like to acknowledge Servicio General de Apoyo a la Investigación from Universidad de Zaragoza. Granted beam time at ILL, via Spanish Initiatives on Neutron Scattering (SpINS), is also appreciated (Experiment CRG-2990; doi:10.5291/ILL-DATA.CRG-2990). The authors would like to express their gratitude to Dr. J. Herrero-Martín for the XAS measurement of the Sr2LaSnFeO7 sample (project number 2023027292) and ALBA synchrotron for the granted beam time., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication and testing of ceramic thermoelectric multi-leg module for high-temperature energy conversion

  • Amirkhizi, Parisa
  • Hedayati, Mehdi
  • Madre, M. A.
  • Dura, Oscar J.
  • Torres, M. A.
  • Sotelo, Andres
  • Kovalevsky, Andrei V.
  • Rasekh, Shahed
This study investigates the fabrication and performance of ceramic-based thermoelectric modules for high-temperature energy conversion, based on Ca2.93Sr0.07Co4O9 and Ca0.91Y0.03La0.03Yb0.03MnO3 p- and n-type materials. The p-type materials were prepared through attrition milling and classical sintering, while ball milling and hot uniaxial pressing were used for the n-type legs. The power factor reached 0.62 mW/(K2m) for the p-type and 0.33 mW/(K2m) for the n-type materials at 800 °C, being comparable to some of the best-reported values in literature. The lower thermal conductivity of n-type material (1.24 W/K/m) compared to the p-type material (1.56 W/K/m) resulted in similar ZT values for n-type (0.29) and p-type (0.43). The thermal expansion behaviour of the materials was also evaluated, demonstrating good thermal compatibility between the p- and n-type legs. The module's performance was tested at hot-side temperatures up to 900 °C, yielding a power density of 34 W/m2. Moreover, the module demonstrated an energy conversion efficiency of 0.8 % (actual) and 6 % (theoretical), thereby underscoring the practical potential of these materials. Additionally, the module exhibited excellent long-term thermal stability, maintaining its performance after 2000 h of exposure at 900 °C and after undergoing 100 thermal cycles, demonstrating its suitability for high-temperature energy recovery applications., The authors wish to thank the Gobierno de Aragón, Spain (Grupo de Investigacion T54_23R) for financial support. Sh. Rasekh acknowledges the support of the Research Employment Contract FCT–CEECIND/02608/2017. This work was also developed within the scope of the Ph.D. project of P. Amirkhizi (grant 2020.08051.BD funded by FCT) and the project CICECO-Aveiro Institute of Materials, UIDB/50011/2020 (DOI 10.54499/UIDB/50011/2020), UIDP/50011/2020 (DOI 10.54499/UIDP/50011/2020) & LA/P/0006/2020 (DOI 10.54499/LA/P/0006/2020), financed by national funds through the FCT/MCTES (PIDDAC). Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza, Spain. This article was supported by the projects UIDB/00481/2020 and UIDP/00481/2020 - Fundação para a Ciência e a Tecnologia, DOI 10.54499/UIDB/00481/2020 (https://doi.org/10.54499/UIDB/00481/2020) and DOI 10.54499/UIDP/00481/2020 (https://doi.org/10.54499/UIDP/00481/2020). M. A. Madre, M. A. Torres, and A. Sotelo acknowledge the grant CEX2023–001286-S funded by MICIU/AEI /10.13039/501100011033. This article was also supported by the Ministerio de Ciencia, Innovación y Universidades (MICIU) /Agencia Estatal de Investigación (AEI), Spain., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

First- and second-order quantum phase transitions in the long-range unfrustrated antiferromagnetic Ising chain

  • Herráiz-López, Víctor
  • Roca-Jerat, Sebastián
  • Gallego, Manuel
  • Ferrández, Ramón
  • Carrete, Jesús
  • Zueco, David
  • Román-Roche, Juan
We study the ground-state phase diagram of an unfrustrated antiferromagnetic Ising chain with longitudinal and transverse fields in the full range of interactions: from all-to-all to nearest-neighbors. First, we solve the model analytically in the strong long-range regime, confirming in the process that a mean-field treatment is exact for this model. We compute the order parameter and the correlations and show that the model exhibits a tricritical point where the phase transition changes from first to second order. This is in contrast with the nearest-neighbor limit where the phase transition is known to be second order. To understand how the order of the phase transition changes from one limit to the other, we tackle the analytically intractable interaction ranges numerically, using a variational quantum Monte Carlo method with a neural-network-based ansatz, the visual transformer. We show how the first-order phase transition shrinks with decreasing interaction range and establish approximate boundaries in the interaction range for which the first-order phase transition is present. Finally, we establish that the key ingredient to stabilize a first-order phase transition and a tricritical point is the presence of ferromagnetic interactions between spins of the same sublattice on top of antiferromagnetic interactions between spins of different sublattices. Tunable-range unfrustrated antiferromagnetic interactions are just one way to implement such staggered interactions., The authors acknowledge funding from Grant No. TED2021-131447B-C21 funded by MCIN/AEI/10.13039/501100011033 and the EU ‘NextGenerationEU'/PRTR, Grant No. CEX2023-001286-S financed by MICIU/AEI/10.13039/501100011033, the Gobierno de Aragón (Grant No. E09-17R Q-MAD), and Quantum Spain and the CSIC Quantum Technologies Platform PTI-001. This research project was made possible through the access granted by the Galician Supercomputing Center (CESGA) to its supercomputing infrastructure. The supercomputer FinisTerrae III and its permanent data storage system have been funded by the Spanish Ministry of Science and Innovation, the Galician Government, and the European Regional Development Fund (ERDF). J.R.-R. acknowledges support from the Ministry of Universities of the Spanish Government through Grant No. FPU2020-07231. S.R-J. acknowledges financial support from Gobierno de Aragón through a doctoral fellowship., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Folding and functionalizing DNA origami: A versatile approach using a reactive polyamine

  • Postigo, Alejandro
  • Marcuello, Carlos
  • Verstraeten, William
  • Sarasa, Santiago
  • Walther, Tobias
  • Lostao, Anabel
  • Göpfrich, Kerstin
  • Barrio, Jesús del
  • Hernández-Ainsa, Silvia
DNA nanotechnology is a powerful synthetic approach to crafting diverse nanostructures through self-assembly. Chemical decoration of such nanostructures is often required to tailor their properties for specific applications. In this Letter, we introduce a pioneering method to direct the assembly and enable the functionalization of DNA nanostructures using an azide-bearing functional polyamine. We first demonstrate the successful polyamine-assisted folding of a scaffolded DNA origami nanostructure equipped with reactive azide groups. Leveraging this reactivity, we next showcase the decoration of the DNA origami via strain-promoted azide-alkyne cycloaddition with dibenzocyclooctyne-containing functional molecules. Specifically, we incorporate a fluorophore (Cy5), polyethylene glycol (PEG), and a hydrophobic phosphatidylethanolamine (PE) tag to tailor the properties of our DNA origami nanostructures. Our approach is expected to streamline and reduce the cost of chemical customization of intricate DNA nanostructures, paving the way for enhanced versatility and applicability., This study was supported by grant PID2020-113003GB-I00 funded by MICIU/AEI/10.13039/501100011033. The authors thank the Aragón government (E47_23R and QMAD E09-23R) and MCIN through the NextGenerationEU funding (PRTR-C17.I1) as well as the support by grant PID2023-147656OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by FEDER, UE. INMA acknowledges financial support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2023-001286-S) by MICIU/AEI/10.13039/501100011033. A.P. acknowledges EMBO Scientific Exchange Grant 10406, Erasmus+ program through Campus Iberus and Programa Ibercaja-CAI de Estancias de Investigación for internships funding. S.S. acknowledges grant PRE2021-098521 by MICIU/AEI/10.13039/501100011033 and FSE+. T.W. thanks the Studienstiftung des deutschen Volkes e.V. A.L. thanks support from the CSIC Research Platform PTI-001 QTEP. K.G. acknowledges the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany’s Excellence Strategy via the Excellence Cluster 3D Matter Made to Order (EXC-2082/1–390761711) and the ERC starting grant ENSYNC (No. 101076997). J.d.B. acknowledges grants RYC-2015-18471, funded by MCIN/AEI/325 10.13039/501100011033 and by “European Social Fund Investing in Your Future”, and CTQ2017-84087-R funded by MCIN/AEI/325 10.13039/501100011033 and by “ERDF A way of making Europe”. The authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gold nanorods – Copper (I) oxide core-shell nanoparticles for full-visible to near-infrared responsive photodetectors

  • Arjona, Mónica
  • García-Peiro, José I.
  • Haro, Marta
  • Hueso, José L.
  • Juárez-Pérez, Emilio J.
Photodetector devices were created using plasmonic gold nanorods (AuNRs) and cuprous oxide (Cu2O) semiconductor nanoparticles (NPs) in a core-shell design. The study evaluated the functionality and performance of Cu2O NP-based photodiode devices and explored the influence of Au NRs and surface plasmon resonance (SPR) on device response. Both Cu2O NP devices and core-shell AuNR@Cu2O NPs showed efficient photon absorption across a broad visible and near-infrared spectrum, with quick light/dark transitions. The devices exhibited electro-optical response on conductive substrates, demonstrating responsivity between 300 and 1800 nm wavelengths. These photoconductor-type devices alter electrical resistance when exposed to light under low bias voltage, displaying diverse photodetector responses., LLA, JIGP, JLH and EJJP thanks the support of the Nanostructured Films & Particles Research Group (NFP). MH thanks the support of the Hybrid Materials and their Structuration Research Group (HYMAT). Both research groups belong to the Instituto de Nanociencia y Materiales de Aragón (INMA), CSIC-Universidad de Zaragoza. Ayuda CEX2023-001286-S financiada por MICIU/AEI /10.13039/501100011033. The authors thank funding from the Government of Aragon (Group T57_23R). The synthesis of materials has been performed by the Platform of Production of Biomaterials and Nanoparticles of the NANOBIOSIS ICTS, more specifically by the Nanoparticle Synthesis Unit (Unit 9) of the CIBER in Bioengineering, Biomaterials & Nanomedicine (CIBER-BBN). The TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, part of the ELECMI ICTS., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene-modified g-C3N4/ α-Fe2O3 systems for light-induced hydrogen generation

  • Touati, Wassila
  • Edelmannová, Miroslava Filip
  • Karmaoui, Mohamed
  • Bekka, Ahmed
  • Furgeaud, Clarisse
  • Chakib, Alaoui
  • Allah, Imene kadi
  • Figueiredo, Bruno
  • Labrincha, J. A.
  • Arenal, Raúl
  • Koci, Kamila
  • Tobaldi, David Maria
Photocatalysis represents an advanced and efficient technology for harnessing light energy. The non-toxicity, affordability, and versatility of this technique render it particularly attractive for hydrogen production via water splitting. Nevertheless, the primary challenge lies in identifying materials capable of efficiently catalyzing the water splitting reaction upon exposure to light. This study presents the influence of the quantity of hematite and graphene on g-C3N4 in the context of hydrogen generation from methanol-water decomposition under UVC irradiation. Pure g-C3N4 exhibits the highest hydrogen generation efficiency. However, adding hematite decreases photocatalytic efficiency, likely due to the formation of a type II heterojunction between α-Fe2O3 and g-C3N4, which reduces the overall reduction capacity of the system. While incorporating graphene into the g-C3N4/α-Fe2O3 system enhances photocatalytic efficiency by improving electron mobility and prolonging the lifetime of photo-generated excitons, the highest yield was achieved with BUF10/GNP0.5. This research offers valuable insights into charge transfer and separation processes for photo-generated excitons within the g-C3N4/α-Fe2O3 and g-C3N4/α-Fe2O3/graphene systems in the context of light-induced hydrogen production., We would like to express our gratitude to the Algerian Ministry of Higher Education and Scientific Research for funding Wassila Touati's visit to the University of Aveiro, through the National Exceptional Scholarship Program (PNE). R.A. gratefully acknowledges the support from the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI /10.13039/501100011033) and by the DGA project E13-23R. The TEM studies were conducted at the Laboratorio de Microscopias Avanzadas, Universidad de Zaragoza, Spain. Kamila Kočí is thankful to the Large Research Infrastructure ENREGAT (project No LM2023056). This work was partly developed within the scope of the project CICECO-Aveiro Institute of Materials, UIDB/50011/2020, UIDP/50011/2020 & LA/P/0006/2020, financed by national funds through the FCT/MCTES (PIDDAC). This work was partly supported by the Italian Ministry of Research (MUR) in the framework of the National Recovery and Resilience Plan (NRRP), funded by the European Union – NextGenerationEU, M4C2, within the NRRP project NFFA-DI, CUP B53C22004310006, IR0000015. “I-PHOQS” Grant (CUP B53C22001750006) and under the complementary actions to the NRRP, “Fit4MedRob” Grant (PNC0000007, CUP B53C22006960001) and “ANTHEM” Grant (PNC0000003, CUP B53C22006710001), funded by NextGenerationEU., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improvement of the flame retardancy of polyamide 6 by the incorporation of UiO-66 and UiO-66/melamine

  • Pina-Vidal, Cristina
  • Berned-Samatán, Victor
  • Piera, Elena
  • Caballero, Miguel A.
  • Téllez, Carlos
The flame retardancy of polyamide 6 (PA6) has been investigated through the incorporation of the metal–organic framework (MOF) UiO-66 and a composite of UiO-66/melamine during the extrusion process. The prepared materials have been characterised by various techniques: XRD, XPS, FTIR, TGA, DSC, SEM, EDX and mechanical properties. Moreover, to examine the efficiency of the flame retardants, the composites have been tested using the UL-94 vertical and, horizontal burning test, as well as the limiting oxygen index (LOI). The UL-94 V-2 standard has been achieved with only a 4 wt% load of either UiO-66 or UiO-66/melamine, compared to pure polyamide, which is not classified. The best results have been achieved with the UiO-66/melamine sample at 7 wt%, which prevents the agglomeration of UiO-66 alone. The highest LOI value was also obtained with this sample, achieving a value of 35.5 %, compared to pure PA6 and with UiO-66, which reached values of 22.4 % and 23.2 %, respectively. A flame suppression mechanism of the UiO-66/melamine composite is proposed, based on the formation of zirconium oxide, gas adsorption by the MOF and release of NH3., LMP53_21 project funded by the Department of Science, University and Knowledge Society of the Government of Aragon and co-financed by Nurel S.A. The University of Zaragoza for the use of the Servicio General de Apoyo a la Investigación-SAI and the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopias Avanzadas”, at the Universidad de Zaragoza. The T68_23R group funded by Government of Aragon. Grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the delamination of zeolitic imidazolate framework ZIF-7-III on the conversion of sucrose into methyl lactate

  • Navarro, Marta
  • Iglesia, Óscar de la
  • Téllez, Carlos
  • Coronas, Joaquín
The catalytic conversion of sugars to methyl lactate has been in the spotlight of the scientific community in the last decades. In this context, delaminated materials can provide better catalytic performances than their precursors, since they have a better accessibility to their active sites. In order to improve the yield to methyl lactate (ML), new delaminated material ZIF-7-III_EX was synthesized from the exfoliation of the dense Zn-based zeolitic imidazolate framework ZIF-7-III. Different techniques, namely XRD, SEM, TEM, thermogravimetric analysis and CO2 adsorption, were carried out to characterize the obtained materials as well as to verify the exfoliation of the precursor. Regarding the catalytic results, as-synthesized ZIF-7 showed a promising yield to ML, 41.2 %, superior to that achieved by ZIF-9 (based on Co instead of Zn). In addition, the delaminated material ZIF-7-III_EX reached a ML yield of 69.1 %, which implies 67.7 % and 97.4 % of improvements with respect to ZIF-7 and to ZIF-7-III, respectively. The reuse of some selected catalyst materials derived from ZIF-7-III was also studied., This work gratefully acknowledges grants PID2022-138582OB-I00 (funded by MICIU/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”), PID2019-104009RB-I00 funded by MICIU/AEI/10.13039/501100011033 and CEX2023-001286-S (funded by MICIU/AEI/10.13039/501100011033/). Financial assistance from the Government of Aragón (T68_23R) is also acknowledged. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. and the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node « Laboratorio de Microscopias Avanzadas (LMA) » at « Universidad de Zaragoza»., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal-organic frameworks/graphene oxide nanohybrids to control pore wetting in membrane distillation

  • Moriones, Andoni
  • Cano-Herranz, Lucía
  • Luque-Alled, José Miguel
  • Téllez, Carlos
  • Gorgojo, Patricia
Membrane distillation (MD) is an emerging technology in the field of water desalination due to its high-energy efficiency and the fact that is not affected by feed salt concentration. As an alternative to feed water pre-treatment, membrane surface modification aims at changing different properties to make it less prone to fouling. This work addresses the mitigation of the most concerning membrane degradation effects in MD, such as pore wetting and fouling, by modifying the membrane surface. This work takes advantage of the adsorption properties of metal-organic frameworks (MOF)@graphene oxide (GO) nanohybrids to create sacrificial sites (located zones where adsorption of foulants is facilitated) on the membrane surface. MOF@GO nanohybrids are embedded between two polydopamine (PDA) layers that are deposited on top of commercial polyethylene (PE) membranes. Two types of MOF@GO nanohybrids were evaluated, one containing UiO-66-NH2 and the other one ZIF-8. Air gap membrane distillation (AGMD) experiments using highly concentrated foulant solutions to accelerate the effects of membrane degradation, showed that surface modification effectively extended membrane life. The selective foulant adsorption delayed pore wetting and allowed to retain most of the membrane flux. Pore wetting occurred after 109 h for the membrane containing ZIF-8@GO (500 mg·m−2), compared to 4–5 h for the unmodified commercial membrane. Due to their high adsorption properties, the presence of MOFs is essential to ensure the formation of sacrificial sites and to maintain the initial flux, thus higher fluxes were observed for MOF@GO membranes (13 kg·m−2·h−1), compared to those containing only GO (5 kg·m−2·h−1)., Project TED2021-130557A-I00 funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. The authors would like to thank the University of Zaragoza for the use of the “Servicio General de Apoyo a la Investigación-SAI” and the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopias Avanzadas”, at the “Universidad de Zaragoza”. The Government of Aragon is also gratefully acknowledged for financing the T68_23R group. Grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033 is also acknowledged. J. M. Luque-Alled acknowledges the Spanish Ministerio de Universidades and the European Union-NextGenerationEU Fund for funding through the Margarita Salas and Juan de la Cierva programmes., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microwave synthesis of UiO-66 with encapsulated caffeine: Liquor mother reuse and release from polyamide composites

  • Pina-Vidal, Cristina
  • Ortega-Moreno, Gabriela A.
  • Lozano, Luis A.
  • Piera, Elena
  • Caballero, Miguel A.
  • Zamaro, Juan M.
  • Téllez, Carlos
In this study, UiO-66 was in-situ synthesized with encapsulated caffeine (CAF@UiO-66) following a one-pot DMF-free microwave-assisted method. The microwave-assisted approach allowed for an efficient and fast encapsulation of caffeine within the metal-organic framework in a single step thus achieving a more environmentally friendly process. It was shown that the CAF@UiO-66 solid was capable of gradually dosing caffeine into aqueous media over a long period. Moreover, the recovered synthesis solution containing residual caffeine and solvent was successfully reused in several encapsulation cycles, giving capsules that showed good caffeine release properties. In addition, CAF@UiO-66 solids were incorporated into polyamide 6 (PA6) fibers through an extrusion process without altering their physicochemical properties. These composites showed a gradual and sustained release of caffeine, extending the dosage time and shelf life of the additive which made it potentially useful for its application in functional textile products. Finally, the release of caffeine from the capsules was fitted to a Fickian model while that from the polymeric composites was adjusted to the semi-empirical Korsmeyer-Peppas model., The authors would like to thank the LMP53_21 project funded by the Department of Science, University and Knowledge Society of the Government of Aragon and co-financed by Nurel S.A. They are also grateful to the Universidad de Zaragoza for the use of the Servicio General de Apoyo a la Investigación-SAI and the use of instrumentation as well as for the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas", at the Universidad de Zaragoza. The Government of Aragon is also gratefully acknowledged for financing the T68_23R group. Grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033 is also acknowledged. Dr. J.M. Zamaro wishes to express his gratitude to ANPCyT and CONICET, both from Argentina, for funding (Project PICT 1880) and institutional support, respectively., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimal control of spin qudits subject to decoherence using amplitude-and-frequency-constrained pulses

  • Hernández-Antón, Alonso
  • Luis, Fernando
  • Castro, Alberto
arXiv:2403.15785v2, Quantum optimal control theory (QOCT) can be used to design the shape of electromagnetic pulses that implement operations on quantum devices. By using non-trivially shaped waveforms, gates can be made significantly faster than those built by concatenating monochromatic pulses. Recently, we applied this idea to the control of molecular spin qudits modeled with Schrödinger's equation and showed it can speed up operations, helping mitigate the effects of decoherence (Castro et al 2022 Phys. Rev. Appl. 17 064028). However, short gate times require large optimal pulse amplitudes, which may not be experimentally accessible. Introducing bounds to the amplitudes then unavoidably leads to longer operation times, for which decoherence can no longer be neglected. Here, we study how to improve this procedure by applying QOCT on top of Lindblad's equation, to design control pulses accounting for decoherence already in the optimization process. We define the control signal in terms of generic parameters, which permits the introduction of bounds and constraints. This is convenient, as amplitude and frequency limitations are inherent to waveform generators. The pulses that we obtain consistently enhance operation fidelities compared to those achieved with the optimization based on Schrödinger's equation, demonstrating the flexibility and robustness of our method. The improvement is larger the shorter the spin coherence time T2., This work has received support from Grants TED2021-131447B-C21, CEX2023-001286-S, PID2022-140923NB-C21, and PID2021-123251NB-I00 funded by MCIN/AEI/10.13039/501100011033, ERDF 'A way of making Europe' and ESF 'Investing in your future', and from the Gobierno de Aragón Grant E09-17R-Q-MAD. This study forms also part of the Advanced Materials and Quantum Communication programmes, supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1), by Gobierno de Aragón, and by CSIC (PTI001)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Performance comparison of different rapid freeze–quench strategies for electron paramagnetic resonance

  • Bracci, Maruan
  • Serra, Ilenia
  • García-Rubio, Inés
  • Van Doorslaer, Sabine
This work addresses the development of a custom-made home-built rapid freeze–quench (RFQ) device and the comparison of its performance to the one of a commercial RFQ setup that was in-house custom adapted. Both systems consist of two syringes that push the reactants into a mixing chamber and the products to a subsequent freezing setup. Using the binding of azide to myoglobin as a calibration reaction, the quenching times of the different setups were compared, evaluating different instrumental parameters, such as software-controlled variation of the aging time, variations of the flow rate and variations of the distance travelled by the mixed sample before freezing. In addition to minimal sample consumption, the home-built RFQ device was found to lead to the shorter reaction times which could be controlled in a time range from 10 to 25 ms. The commercial RFQ system yielded optimal reaction control in a time range from 50 to 200 ms, although a larger volume of reactants needed to be used due to the significant dead volume of the system. Three different freezing methods were also evaluated, among which, in our hands, freezing the jet directly in a deep bath of cold isopentane yielded shorter and reproducible freezing times., The research leading to these results received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 813209, grant No. PID2021-127287NB-I00 of the Spanish Ministry of Science and Innovation and Ayuda CEX2023-001286-S financiada por MICIU/AEI /https://doi.org/10.13039/501100011033. This study was also supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) promoted by the Government of Aragon. We thank C. Obinger (University of Natural Resources and Life Sciences, Vienna) for making the BioLogic RFQ instrumentation available to us in the framework of joint projects and Oliver Oberhänsli and Reinhard Kissner (ETH Zürich) for their support in manufacturing the silver-rod freezing apparatus and Alexander Taeymans (University of Antwerp) for help in 3D printing. Also, we would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phase segregation of aged MgCSZ–MgO directionally solidified eutectic composites

  • Oliete, Patricia B.
  • Merino, R. I.
  • Peña, J. I.
  • Sanjuán, M. L.
The improvement of the thermomechanical properties of Mg-partially stabilized zirconia after appropriate thermal treatments is well known. Most studies in this subject have been conducted in polycrystalline materials produced by solid-state reaction. In this work, we analyze the segregation behavior and mechanical properties of solidified eutectic composites of the ZrO2–MgO system, where MgO lamellae or fibers are embedded into a cubic Mg-stabilized zirconia (MgCSZ) containing ∼18 mol% MgO. The eutectics have been aged at 1240 or 1225°C for periods varying between 2 and 24 h. This treatment results in the progressive phase separation of the MgCSZ matrix into different mixtures of tetragonal (t), monoclinic (m), δ (Mg2Zr5O12), and MgO phases. Two types of segregation are observed, according to whether the Mg-rich phase is the metastable δ phase (type I) or MgO (type II). Both types may coexist in the same sample but type I predominates at 1240°C and type II at 1225°C. Type I is mainly of the t + δ type, although for long ageing time the t precipitates transform to monoclinic symmetry, resulting in a final m + δ segregation scheme. In type II segregation, the monoclinic phase is the main Mg-poor product. Hardness and toughness have been studied by the Vickers indentation method. The indentation fracture toughness KIC increases progressively with ageing time and for 24 h treatment is more than doubled with respect to the as-processed eutectic, while the hardness decreases slightly., The authors acknowledge financial support through grant PID2021-124863OB-I00 funded by MCIN/AEI/10.13039/501100011033; CEX2023-001286-S funded by MICIU/AEI/10.13039/ 501100011033 and DGA funds to T02_23R research group., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polyoxometalate-ionic liquids (POM-ILs) - a new type of ionic liquid additive family for lubricants

  • Casasín, Maria Luisa
  • Khanmohammadi, Hamid
  • Mitchell, Scott G.
  • Espallargas, Nuria
The focus on energy efficiency to move towards a more sustainable use of resources has intensified efforts to minimize friction and wear in mechanical systems, which account for 23% of the world's energy consumption. In this study, polyoxometalate ionic liquids (POM-ILs) are introduced as environmentally acceptable lubricant additives, for their potential friction-reducing and anti-wear (AW) properties. These compounds, characterized by their complex structures and tunable properties, have been investigated for their tribological performance across base fluids of varying polarities. Their performance has been compared against zinc dialkyldithiophosphate (ZDDP), a standard AW additive. Our findings demonstrate that POM-ILs exhibit promising friction-reducing and AW capabilities, comparable to traditional additives. The efficacy of POM-ILs was found to be highly dependent on the base fluid used, with significant variations observed in their ability to interact with stainless steel surfaces. Adsorption studies confirmed strong adsorption of POM-ILs onto stainless steel, with notable influence from the base fluid. Advanced characterization techniques revealed the formation of a predominantly oxide-rich tribofilm on the metal surface, as a result of POM-IL decomposition and reaction with the metal. POM-ILs show significant potential as lubricant additives, with their structural versatility offering a promising path for future greener developments in tribology., The authors would like to acknowledge financial support from the Norwegian Infrastructure for Micro- and Nanofabrication (NORFAB, project 295864), the Infrastructure for Materials Research for Transporting Hydrogen (SMART-H, project 296197) and the enabling technologies at NTNU (project 81771596). This work was funded through the grant PID2022-141276OB-I00 and CEX2023-001286-S funded by MCIN/AEI/10.13039/501100011033 (Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación, Spain). This study was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) promoted by the Government of Aragón. The authors acknowledge the Laboratorio de Microscopias Avanzadas (LMA) at the University of Zaragoza for offering access to their instruments and expertise. M.-L. C. acknowledges COST Action CA20130 “Euro-MIC” for an STSM grant., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Position-sensitive domain-by-domain switchable ferroelectric memristor

  • Risch, Felix
  • Koutsogiannis, Panagiotis
  • Tikhonov, Yuri
  • Razumnaya, Anna G.
  • Magén, César
  • Pardo, José A.
  • Lukyanchuk, Igor
  • Stolichnov, Igor
Domain-wall electronics based on the tunable transport in reconfigurable ferroic domain interfaces offer a promising platform for in-memory computing approaches and reprogrammable neuromorphic circuits. While conductive domain walls have been discovered in many materials, progress in the field is hindered by high-voltage operations, stability of the resistive states and limited control over the domain wall dynamics. Here, we show nonvolatile memristive functionalities based on precisely controllable conductive domain walls in tetragonal Pb(Zr,Ti)O3 thin films within a two-terminal parallel-plate capacitor geometry. Individual submicron domains can be manipulated selectively by position-sensitive low-voltage operations to address distinct resistive states with nanoampere-range conduction readout. Quantitative phase-field simulations reveal a complex pattern of interpenetrating a- and c-domain associated with the formation of 2D conducting layers at the intertwined regions and the emergence of 3D percolation channels of extraordinary high conductivity. Subnanometer resolution polarization mapping experimentally proves the existence of such extensive segments of charged tail-to-tail domain walls with unconventional structure at the ferroelastic-ferroelectric domain boundaries., This project has received funding from the EU Horizon 2020 program under the MSCA-ITN action MANIC, grant agreement No 861153 and MSCA-RISE action MELON, grant agreement No 872631. The authors gratefully acknowledge Dr. B. Fraygola for PLD deposition and Dr. S. Kamaei for helpful discussions. The authors acknowledge research Projects No. PID2020-112914RB-I00, PID2023-147211OB-C22 788, and the Severo Ochoa program CEX2023-001286-S funded by Grant No. MCIN/AEI/10.13039/501100011033. This work was also funded from Regional Gobierno de Aragon through Project Nos. E13_23R and E28_23R, including FEDER funding. A.R. acknowledges the Slovenian Research Agency support (P1-0125). This work was granted access to HPC resources of ”Plateforme MatriCS” within University of Picardie Jules Verne. ”Plateforme MatriCS” is cofinanced by the European Union with the European Regional Development Fund (FEDER) and the Hauts-De-France Regional Council among others., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

TiO2 surface hybridisation with Ag and CuO for solar-assisted environmental remediation and sustainable energy applications

  • Dvoranová, D.
  • Koci, Kamila
  • Lajaunie, Luc
  • Edelmannová, Miroslava Filip
  • Seabra, Maria P.
  • Brezová, V.
  • Arenal, Raúl
  • Labrincha, J. A.
  • Tobaldi, David Maria
Industrialisation has led to unprecedented levels of outdoor air pollution, posing a significant health risk to human beings. Consequently, there is an urgent need to replace fossil fuels with sustainable energy sources, thereby mitigating these risks and providing a safer outdoor and indoor environment. Titanium dioxide is a versatile transition metal oxide with applications ranging from energy conversion to environmental remediation. However, it faces limitations, particularly in its absorption spectrum and charge separation efficiency, and enhancing these properties remains a significant challenge. In this research work, we have decorated the surface of TiO2 hybridising it with noble-metal and/or noble-metal oxides (Ag and/or CuO) to improve the photocatalytic performances (monitoring the removal of nitrogen oxides and benzene, and hydrogen generation from water splitting) under simulated solar-light irradiation. Our results showed that titania modified with an Ag : Cu molar ratio equal to 1 : 1, not only exhibited the most promising performance in terms of nitrogen oxides and benzene removal, it was the optimum amount for the light-induced generation of hydrogen from water splitting., This work was partly supported by the Italian Ministry of Research (MUR) in the framework of the National Recovery and Resilience Plan (NRRP), funded by the European Union – NextGenerationEU, M4C2, within the NRRP project NFFA-DI, CUP B53C22004310006, IR0000015. “I-PHOQS” Grant (CUP B53C22001750006) and under the complementary actions to the NRRP, “Fit4MedRob” Grant (PNC0000007, CUP B53C22006960001) and “ANTHEM” Grant (PNC0000003, CUP B53C22006710001), funded by NextGenerationEU. The STEM measurements were performed in the Laboratorio de Microscopias Avanzadas (LMA) at the Universidad de Zaragoza (Spain). Raul Arenal gratefully acknowledges the support from the Spanish Ministry of Science, Innovation and Universities (MICIU, PID2019-104739GB-100/AEI/10.13039/501100011033), the ′Severo Ochoa’ Programme for Centres of Excellence in R&D of the MICIU (CEX2023-001286-S MICIU/AEI /10.13039/501100011033), and from the Gobierno de Aragón (DGA) under the project E13-2R. Luc Lajaunie acknowledges funding the from the Spanish Ministerio de Economía y Competitividad, the Ministerio de Ciencia e Innovación (MCIN/AEI/10.13039/501100011033/FEDER UE), and the European Union “NextGenerationEU”/PRTR (PID2022-140370NB-I00, RYC2021-033764-I, CPP2021-008986). The authors also acknowledge the support by European Union under the REFRESH – Research Excellence for Region Sustainability and High-tech Industries project number, CZ.10.03.01/00/22_003/0000048 via the Operational Programme Just Transition and by Large Research Infrastructure ENREGAT (project No. LM2023056). The study was also financially supported by the Slovak Research and Development Agency under the contract Nr. APVV-21-0039 and Scientific Grant Agency of the Slovak Republic (VEGA Project 1/0422/24). We are particularly obliged to Miss Dafne Maria Glaglanon for proof-editing the English of the manuscript., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Open Access publishing facilitated by Consiglio Nazionale delle Ricerche, as part of the Wiley - CRUI-CARE agreement., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Toward quantitative thermoelectric characterization of (nano)materials by in-situ transmission electron microscopy

  • Hettler, Simon
  • Furqan, Mohammad
  • Sotelo, Andres
  • Arenal, Raúl
We explore the possibility to perform an in-situ transmission electron microscopy (TEM) thermoelectric characterization of materials. A differential heating element on a custom in-situ TEM microchip allows to generate a temperature gradient across the studied materials, which are simultaneously measured electrically. A thermovoltage was induced in all studied devices, whose sign corresponds to the sign of the Seebeck coefficient of the tested materials. The results indicate that in-situ thermoelectric TEM studies can help to profoundly understand fundamental aspects of thermoelectricity, which is exemplary demonstrated by tracking the thermovoltage during in-situ crystallization of an amorphous Ge thin film. We propose an improved in-situ TEM microchip design, which should facilitate a full quantitative measurement of the induced temperature gradient, the electrical and thermal conductivities, as well as the Seebeck coefficient. The benefit of the in-situ approach is the possibility to directly correlate the thermoelectric properties with the structure and chemical composition of the entire studied device down to the atomic level, including grain boundaries, dopants or crystal defects, and to trace its dynamic evolution upon heating or during the application of electrical currents., The authors acknowledge funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 889546, the Government of Aragon (DGA) through the project E13_23R, the Spanish MICIU with funding from European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon and by the Spanish MICIU (PID2019-104739GB-100/AEI/10.13039/501100011033, PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI 10.13039/501100011033). The microscopy works have been conducted in the Laboratorio de Microscopias Avanzadas (LMA) at Universidad de Zaragoza. Sample courtesy (MLC NT) from MB Sreedhara and R. Tenne (MLC NT, Weizmann Institute of Science, Israel) is acknowledged. The authors thank M. Rengifo (INMA, CSIC-Universidad de Zaragoza) for discussions about electrical characterizations, P. Strichovanek (INMA, CSIC-Universidad de Zaragoza) for Ti-Pt sputter deposition, R. Valero (LMA, Universidad de Zaragoza) for support with MEMS and Ge thin-film fabrication and N. Navascues (INMA, CSIC-Universidad de Zaragoza) for support with Raman acquisition., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Triple-point phase diagrams for BTO-based ceramics

  • Gracia, David
  • Fauth, François
  • Lafuerza, Sara
  • Evangelisti, Marco
  • Blasco, Javier
The temperature–composition structural phase diagram of the BTO-based ferroelectric system Ba0.94Ca0.06Ti1−xHfxO3 (0.05 ≤ x ≤ 0.15) is investigated using high-angular resolution synchrotron X-ray powder diffraction and dielectric permittivity measurements. In contrast to the well-known structural phase transition sequence of the parent compound BaTiO3 (rhombohedral → orthorhombic → tetragonal → cubic, upon heating), Hf4+ doping into Ba0.94Ca0.06Ti1−xHfxO3 results in the gradual disappearance of the intermediate orthorhombic and tetragonal phases at two different, but close, critical concentrations, 0.10 < xc1 < 0.12 and 0.12 < xc2 < 0.135, respectively, revealing the presence of two triple points in the phase diagram., This work was supported by MICIU/AEI/10.13039/501100011033 ERDF/UE (PID2021-124734OB-C21, CEX2023-001286-S), Gobierno de Aragón (E11-23R and E12-23R). David Gracia acknowledges financial support from the Gobierno de Aragón through a doctoral fellowship. We thank the Servicio General de Apoyo a la Investigación from the Universidad de Zaragoza. Granted beam time at ALBA Synchrotron is also acknowledged (Proposal No. 2023027380)., We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hierarchical domain structures in buckled ferroelectric free sheets

  • Pesquera, David
  • Cordero-Edwards, Kumara
  • Checa, Martí
  • Ivanov, Ilia
  • Casals, Blai
  • Rosado, Marcos
  • Caicedo, José Manuel
  • Casado-Zueras, Laura
  • Pablo-Navarro, Javier
  • Magén, César
  • Santiso, José
  • Domingo, Neus
  • Catalán, Gustau
  • Sandiumenge, Felip
Flat elastic sheets tend to display wrinkles and folds. From pieces of clothing down to two-dimensional crystals, these corrugations appear in response to strain generated by sheet compression or stretching, thermal or mechanical mismatch with other elastic layers, or surface tension. Extensively studied in metals, polymers and, — more recently — in van der Waals exfoliated layers, with the advent of thin single crystal freestanding films of complex oxides, researchers are now paying attention to novel microstructural effects induced by bending ferroelectric-ferroelastics, where polarization is strongly coupled to lattice deformation. Here we show that wrinkle undulations in BaTiO<inf>3</inf> sheets bonded to a viscoelastic substrate transform into a buckle delamination geometry when transferred onto a rigid substrate. Using spatially resolved techniques at different scales (Raman, scanning probe and electron microscopy), we show how these delaminations in the free BaTiO<inf>3</inf> sheets display a self-organization of ferroelastic domains along the buckle profile that strongly differs from the more studied sinusoidal wrinkle geometry. Moreover, we disclose the hierarchical distribution of a secondary set of domains induced by the misalignment of these folding structures from the preferred in-plane crystallographic orientations. Our results disclose the relevance of the morphology and orientation of buckling instabilities in ferroelectric free sheets, for the stabilization of different domain structures, pointing to new routes for domain engineering of ferroelectrics in flexible oxide sheets., D.P. acknowledges funding from ‘la Caixa’ Foundation fellowship (ID 100010434). The authors acknowledge the Spanish Ministry of Industry, Economy and Competitiveness (MINECO) through Grants no PID2019–108573GB-C21, PID2022–140589NB-I00, PID2020–112914RB-I00 and PID2023–147211OB-C22 funded by Grant No MCIN/AEI/10.13039/501100011033. The Micro Raman imaging research was conducted as part of a user project at the Center for Nanophase Materials Sciences (CNMS), which is a US Department of Energy, Office of Science User Facility at Oak Ridge National Laboratory. Authors acknowledge the use of instrumentation financed through Grant IU16–014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, and Generalitat de Catalunya. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya and by the Severo Ochoa Centres of Excellence Programme, funded by the Spanish Research Agency (AEI, CEX2021–001214-S). The ICMAB is funded the Severo Ochoa Centres of Excellence Programme, funded by the Spanish Research Agency (AEI, CEX2023–001263-S). The INMA is funded by the Severo Ochoa Centres of Excellence Programme (AEI, CEX2023–001286-S). The authors acknowledge the European’s Union Horizon 2020 research and innovation programme under Grant No 823713-ESTEEM3. This work was also funded from Regional Gobierno de Aragon through Project Nos. E13_23R, including FEDER funding. The authors also acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node «Laboratorio de Microscopias Avanzadas (LMA)» at «Universidad de Zaragoza». The authors are grateful to Dr. Kapil Gupta for assistance with the Spectra electron microscope at the Joint Electron Microscopy Centre at ALBA synchrotron (JEMCA)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021–001214-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023–001263-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2023–001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Intrinsic magnetic topological insulators of the MnBi2Te4 family

  • Vyazovskaya, Alexandra Yu.
  • Bosnar, Mihovil
  • Chulkov, Eugene V.
  • Otrokov, Mikhail M.
This short review appears on the occasion of the fifth anniversary of discovery of intrinsic magnetic topological insulators (MTIs) of the MnBi2Te4 family, which have attracted a great deal of attention recently. This family of materials has been discovered in attempts to increase the observation temperature of the quantum anomalous Hall effect as well as to facilitate the eventual realization of the topological magnetoelectric effect. Therefore, we first briefly introduce these effects, then describe the experimental state-of-the-art in the MTIs field just prior to MnBi2Te4 appearance, after which we discuss the basic properties of this material and its family. Finally, we overview the exciting progress made during 5 years of intense research in this field., We acknowledge the support by MCIN/AEI/10.13039/501100011033/ (Grant PID2022-138210NB-I00) and “ERDF A way of making Europe", by the Grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033, as well as MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) promoted by the Government of Aragon. A.Yu.V. acknowledges support from the Ministry of Science and Higher Education of the Russian Federation (state task No FSWM-2025-0009). E.V.C. acknowledges Saint-Petersburg State University for a research project No 125022702939-2. M.B. acknowledges support of the Croatian Science Foundation under the project numbers HRZZ-IP-2022-10-6321 and HRZZ-MOBDOL-2023-12-6938., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemistry and interfacial structure promoting quasi-van der Waals epitaxial growth of WS2 nanosheets on sapphire for prospective application in field-effect transistors

  • Majumder, Supriyo
  • Shinde, Nitin
  • Cavin, John
  • Chen, Chen
  • Dey, Arka Bikash
  • Narayanachari, K. V. L. V.
  • Zhang, Jiaqi
  • Garcia-Wetten, David
  • Dieguez, Oswaldo
  • Hettler, Simon
  • Cohen, Assael
  • Keane, Denis T.
  • Arenal, Raúl
  • Rondinelli, James M.
  • Ismach, Ariel
  • Bedzyk, Michael
How do chemical and structural modifications to the supporting crystal surface affect the subsequent van der Waals (vdW) or quasi(Q)-vdW epitaxial growth of 2D nanocrystals? Developing an atomic-scale picture of such an interfacial system is crucial for understanding its impact on the physical and chemical properties of the supported 2D materials. The elucidation of the interfacial structure and chemistry needed to promote the Q-vdW epitaxial growth of 2D tungsten disulfide (WS2) nanocrystals contributes to the growth mechanism understanding, thus pushing forward the integration of such atomically thin semiconductors toward real field-effect transistor applications. In addition to an atomic-force microscopy top view, we showcase a combination of X-ray techniques for a top-to-bottom investigation of the complexities of the buried interface structures. This approach uses X-ray photoelectron spectroscopy, X-ray standing wave excited X-ray fluorescence, and crystal truncation rod scattering to produce a highly resolved chemical-state-specific 3D atomic map for the extended interface structure of WS2/α-Al2O3(001). Employing these detailed analysis methods, along with density functional theory to further refine the picoscale structure, we demonstrate how two different types of interface engineering during the pregrowth stage lead to significant differences in the chemical and structural modifications to the terminal surface of c-face sapphire, which in turn leads to substantial differences in the submonolayer growth of supported WS2 2D nanocrystals in terms of lateral domain sizes, epitaxial registry, vdW gaps, and stability., This work was supported by DOE/BES Award No. DE-SC0023450 to the Hydrogen in Energy and Information Sciences EFRC at Northwestern University (NU). D.G. was supported by DOE contract no. DEAC02-07CH11359 to the Superconducting Quantum Materials and Systems Center. The 5ID-C DNDCAT beamline at the Advanced Photon Source (APS) was used for XSW measurements. The APS, an Office of Science User Facility operated for DOE by Argonne National Laboratory, is supported by DOE under Contract DE-AC0206CH11357. The P08 beamline at PETRA III Deutsches Elektronen-Synchrotron (DESY), a member of the Helmholtz Association HGF, was used for CTR measurements. This work also made use of the XRD, and Keck-II XPS facilities at NU supported by the MRSEC program (NSF DMR-2308691), Keck Foundation, State of Illinois, and the Soft and Hybrid Nanotechnology Experimental (SHyNE) Resource (NSF ECCS-2025633). Sample T was grown at Tel Aviv University, N.S., and A.I. acknowledge the generous support from the Israel Science Foundation, grant # 2596/21. Sample P was grown in the 2D Crystal Consortium Materials Innovation Platform (2DCC-MIP) facility at Penn State, which is supported by the National Science Foundation (NSF) under NSF cooperative agreement NSF DMR-2039351. S.M. and M.B. thank Paul Fenter (Argonne National Lab), Joanne Stubbs (University of Chicago), and Peter Eng (University of Chicago) for helpful discussions on CTR data analysis. R.A. acknowledges funding from the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI/10.13039/501100011033) and by the MICIU with funding from European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon (DGA) as well from the DGA project E13-23R. The STEM studies have been conducted at the Laboratorio de Microscopias Avanzadas (LMA), Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Enhanced magnetoelastic stress in disordered iron-gallium alloy thin films revealed by direct measurement

  • Begué Gracia, Adrián
  • Proietti, M. G.
  • Arnaudas, José I.
  • Ciria, Miguel
The large magnetostriction in FeGa alloys is relevant for manifold applications, but for thin films, it can play a prominent role in controlling the strength of the magnetic anisotropy. Bulk samples show values depending on the extensive preparation procedure compendium, which is limited in its temperature range for high-quality thin-film synthesis. Here, we present a study of the magnetoelastic coupling coefficients B1 and B2 in epitaxial FeGa thin films below 50 nm deposited on the MgO(001) surface at 150 ºC by the cantilever method. Series of films with 22, 28, and 33 at. % Ga do not show thickness-dependent variations for B1 and B2, but -B1 for the 22 at. % Ga composition is 10 MPa, roughly 2 times the bulk value and smaller than the bulk-like value of -B1=12.1 MPa obtained for a film with 17 at. % Ga. This enhancement is correlated with the A2 crystal structure for the film rather than the coexistence with D03 or other ordered nanometric precipitates proposed for bulk samples. Synchrotron diffraction excludes the formation of long-range L60, or D03 precipitates in samples with (001)A2 peaks at concentrations around 25 at. % Ga, which implies partial chemical disorder. The analysis of extended x-ray absorption fine structure measurements points to a D03 local order with a residual number of Ga-Ga pairs. Considering that the substrate quenches the movable strain in the A2 phase described in dual-phase structures, our results point to the important role of the electronic structure of the iron atoms modified by the presence of Ga in the alloy. This effect enlarges B1 in films with the A2 phase, stabilized using epitaxial growth., We thanks grant TED2021-131064B-I00 funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR, grant PID2021-124734OB-C21 funded by MCIN /AEI /10.13039/501100011033 and by “ERDF A way of making Europe” and grant CEX2023-001286-S funded by MICIU/AEI /10.13039/501100011033 and Gobierno de Aragón, Spain (grant E12-23R). A. B. would like to acknowledge the funding received from the Ministry of Universities and the European Union-Next Generation for the Margarita Salas fellowship . We are grateful to the staff of beamline I18 at Diamond UK’s National Synchrotron Light source and BM25 Spain Beamline at ESRF for their strong support in performing the experiments. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node Laboratorio de Microscopias Avanzadas (LMA) at Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced power factor in CaMnO3-based thermoelectric ceramics via co-doping

  • Amirkhizi, Parisa
  • Torres, M. A.
  • Depriester, Michael
  • Hedayati, Mehdi
  • Sotelo, Andres
  • Madre, M. A.
  • Kovalevsky, Andrei V.
  • Rasekh, Shahed
Data will be made available on request., Nb-doped Ca0.97Y0.01La0.01Yb0.01Mn1-xNbxO3 materials were prepared to assess their thermoelectric properties. Samples were obtained by sintering at 1583 K for 12 h involving planetary milled precursors. XRD analysis indicated primarily thermoelectric phase with minor CaMn2O4. Microstructural observations revealed decreasing grain size with increasing Nb content. However, electrical resistivity decreases for the samples with Nb-content up to 0.03, which can be associated with the increase of the charge carrier concentration. The lowest value at 1073 K (9.2mΩcm) is among the best reported in the literature. Seebeck coefficient decreased with Nb-doping, and the best PF value at 1073 K has been determined for 0.01Nb samples (∼0.48mW/K2m). Assuming the thermal conductivity at 1073 K similar to that at 473 K, the calculated ZT values are among the typically reported in this family. These results highlight the promise of CaMnO3-based materials for integration in thermoelectric modules working under steady-state mode, where the high PF values are of great importance., The authors wish to thank the Gobierno de Aragón (Grupo de Investigacion T54_23R) for financial support. Sh. Rasekh acknowledges the support of the Research Employment Contract FCT–CEECIND/02608/2017. This work was also developed within the scope of the PhD project of P. Amirkhizi (grant 2020.08051.BD funded by FCT) and the project CICECO-Aveiro Institute of Materials, UIDB/50011/2020 (DOI 10.54499/UIDB/50011/2020), UIDP/50011/2020 (DOI 10.54499/UIDP/50011/2020) & LA/P/0006/2020 (DOI 10.54499/LA/P/0006/2020), financed by national funds through the FCT/MCTES (PIDDAC). M. A. Madre, M. A. Torres, and A. Sotelo acknowledge the grant CEX2023–001286-S funded by MICIU/AEI /10.13039/501100011033. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Förster Resonance Energy Transfer (FRET) demonstrates in vitro chitosan-coated nanocapsules suitability for intranasal brain delivery

  • Alleva, María
  • Baranyai, Zsuzsa
  • Esteban-Pérez, Natalia
  • Martínez-Vicente, Pablo
  • Martín-Rapún, Rafael
  • Moros, María
  • Fuente, Jesús M. de la
Intranasal drug delivery to the brain offers a promising strategy to overcome biological barriers. Chitosan-coated nanoemulsion-based nanocapsules demonstrate significant potential due to their mucoadhesive properties, ability to permeate epithelial cells, and ability to solubilize poorly water-soluble drugs, making them ideal candidates for bypassing the blood-brain barrier and overcoming the nasal mucosa. To ensure effective drug delivery, it is critical to assess the integrity of these nanocapsules during their transit across such barriers. In this study, we employed Förster resonance energy transfer to track the structural integrity of nanocapsules during transport. A simplified in vitro model was established using Calu-3 cells to mimic the mucosal epithelial barrier and Balb-c 3T3 fibroblasts as target cells. Our findings demonstrated that the nanoemulsion core of the nanocapsules successfully crossed the in vitro epithelial barrier and reached target cells while maintaining its structural integrity. These results validate the potential of chitosan-coated nanocapsules as a robust platform for the intranasal delivery of drugs to the brain., This work has been supported by MICIU/AEI/10.13039/501100011033 (PID2020-118485RB-I00, and ayuda Severo Ochoa CEX2023-001286-S), by CIBER-Consorcio Centro de Investigación Biomédica en Red/Instituto de Salud Carlos III (CB16/01/00263). This research work was also funded by the European Commission–NextGenerationEU (Regulation EU 2020/2094) through CSIC’s Global Health Platform (PTI Salud Global), and by the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 842652 and the CSIC’s MSCA IF extension. MA and NEP acknowledge Gobierno de Aragón for predoctoral fellowships (2019–2023 and 2022–2026). The authors also acknowledge support from Gobierno de Aragón and “ERDF A way of making Europe” for funding the Bionanosurf (E15_20R) research group., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal-organic frameworks built from a carborane linker isolating ideal one-dimensional large-spin chains of Co (S = 3/2) or Ni (S = 1)

  • Li, Xiao-Bao
  • Light, Mark E.
  • Arauzo, Ana B.
  • Bartolomé, Elena
  • Giner Planas, José
One-dimensional (1D) antiferromagnetic chains are fascinating because of their exotic quantum phenomena. However, isolating large-spin S chains remains challenging as even minimal interchain interaction J′ tends to drive unwanted long-range ordering. Here, we report on the synthesis, crystal structure, magnetism, optical, and electronic properties of two isostructural metal–organic frameworks (MOFs), [M2(mCB-L)2(μ2-H2O)2(DMF)4]n·solv (M = Co(II) (mCB-Co) or Ni(II) (mCB-Ni)), which feature water-bridged Co (S = 3/2) or Ni (S = 1) spin chains that are effectively separated by bulky carborane linkers (1,7-di(4-carboxyphenyl)-1,7-dicarba-closo-dodecaborane, mCBLH2). The temperature-dependent susceptibility reveals strong antiferromagnetic interactions with significant intrachain coupling, JCo/kB = −4.65 K (mCB-Co) and JNi/kB = −23.36 K (mCB-Ni), yet confirm the absence of long-range order down to 0.3 K due to negligible interchain interactions, as corroborated by specific heat data. This indicates extremely small J′, with J′/J < 4.7 × 10−4 (3.7 × 10−5) for Co (Ni) MOFs, making these new materials nearly ideal 1D antiferromagnets. Additionally, optical band gaps were estimated via the Kubelka–Munk method, yielding an increase from 3.83 eV for mCB-Co to 4.20 eV for mCB-Ni, showcasing tunable electronic properties across the two MOFs., This work was financially supported by the Spanish “Ministerio de Ciencia, Innovacion y Universidades” (PID2022-136892NB-I00) and (PID2022-138492NB-I00), the Gobierno de Aragón (RASMIA E12-23R), the State Investigation Agency, through the Severo Ochoa Program for Centres of Excellence in R&D (CEX2023-001263-S and CEX2023-001286-S), and by the Generalitat de Catalunya (2021/SGR/00442). Xiao-Bao Li is enrolled in the UAB PhD program and acknowledges the China Scholarship Council (CSC) for his PhD grant (202106650003). Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001263-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Monitoring and decontamination technologies for removing waterborne micro- and nanoplastic contaminants

  • Amonte, Cecilia
  • Gracia-Vallés, Nicolás
  • Mitchell, Scott G.
  • Gurauskis, Jonas
Micro- and nanoplastics (MNPs) are accumulating worldwide, posing a threat to ecosystems and biodiversity due to the ongoing global demand. In the literature there is a wide variety of procedures for sampling and characterizing MNPs in water samples, highlighting a lack of standardized methods, particularly plastics in the nanometric range (<0.1 μm), which require the removal of larger particles (>1.0 μm) followed by a concentration step to reach the quantification limits of analytical techniques. Proper sampling is essential for collecting representative samples, followed by a pre-treatment to remove suspended particles, which may interfere in the subsequent analysis. Consequently, specific techniques are employed to isolate the MNPs from the matrix samples and proceed to visual and chemical characterization. This review compiles key data on MNP characterization and advocates for a “best practices” toolbox to overcome current challenges, proposing a conceptual framework for developing efficient MNP characterization and supporting potential decontamination technologies., This project has received funding from Pathfinder Open 2022, a European Innovation Council (EIC) work program that is part of Horizon Europe (grant agreement no. 101099528) and UK Innovation Funding Agency (UKRI) (reference no. 10062709). This work was also supported through CEX2023-001286-S funded by MCIN/AEI/10.13039/501100011033 (Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación, Spain). This study was supported by MCIN with funding from the European Union NextGenerationEU, With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nitrogen and phosphorus Co-doped ZnO-CdO nanocomposite with boosted photocatalytic degradation of crystal violet

  • Neda, Gebru
  • Taddesse, Abi M.
  • Díaz Carretero, Isabel
  • Mohammed, Ahmed M.
  • Mayoral, Álvaro
  • Yassin, Jemal M.
Nitrogen (N) and phosphorus (P) co-doped ZnO-CdO nanocomposites were synthesized from bioprecursors such as rice (O. Sativa L.), chickpea (Cicer arietinum L.), soybean (G. max (L.) Merr) and sesame (Sesamum indicum L.) through self-doping into the ZnO-CdO composite. The as synthesized composites were characterized using PXRD, XPS, TGA, SEM, Cs-corrected (S) TEM, EDS, FT-IR, AAS and UV-vis spectrophotometer. Effect of biogenic doping on the band structures of the binary heterojunction was also studied using Density Functional Theory (DFT). The theoretical results showed that NP co-doping in ZnO-CdO nanocomposite improves the absorption edge to longer wavelengths in line with the experimental finding obtained from UV-vis measurement. Biogenic NP co-doped ZnO-CdO nanocomposites showed greater photocatalytic activity compared to the undoped congeners under visible light irradiations. Comparatively, photocatalytic activity of biogenic NP co-doped ZnO-CdO samples showed the order: soybean-ZC > chickpea-ZC > rice-ZC > sesame-ZC at optimal conditions under visible light irradiation. The binary ZnO-CdO nanocomposite also showed better photocatalytic activity compared to the host crystal ZnO under the same experimental conditions. Highest photocatalytic degradation efficiency of biogenic NP co-doped ZnO-CdO could be attributed to the lower rate of recombination of the photogenerated electrons and holes as well as its lower band gap energy and good reusability., The authors acknowledge the grant PID2022-136321OB-C21/AEI/10.13039/501100011033/FEDER, EU and to the PID2022-136535OB-100 grant; to the CSIC for the COOPA20271, COOPB22002, and COOPB24072 grants, as well as research grants (HURG-2016-03-02 and HURG-2020-03-02-75) received from Ministry of Education through office of the Research and Extension, Haramaya University. AM acknowledges the Spanish Ministry of Science (RYC2018-024561-I and to the European Union NextGeneration EU/PTR; CNS2023-144346), the grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033 and the support by Aragon Government ( E13_23R)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Proximity-mediated multi-ferroelectric coupling in highly strained EuO-graphene heterostructures

  • Pandey, Satakshi
  • Pin, Thomas
  • Hettler, Simon
  • Arenal, Raúl
  • Bouillet, Corinne
  • Maroutian, Thomas
  • Robert, Jérôme
  • Gobaut, Benoit
  • Kundys, Bohdan
  • Dayen, Jean-François
  • Halley, David
2D van der Waals materials and their heterostructures are a fantastic playground to explore emergent phenomena arising from electronic quantum hybridization effects. In the last decade, the spin-dependant hybridization effect pushed this frontier further introducing the magnetic proximity effect as a promising tool for spintronic applications. Here the uncharted proximity-controlled magnetoelectric effect in EuO/graphene heterostructure is unveiled. This is obtained while creating a new multiferroic hybrid heterostructure with multifunctional properties. Using a topotactic method magnetic insulating EuO thin films on graphene is grown under high compressive strain, which induces the appearance of an additional ferroelectric order, with an electric polarization that reaches up to 18 µC cm-2 at room temperature. This observation therefore quantitatively confirms the theoretical predictions made 15 years ago of a strain-induced ferroelectric state in EuO. Moreover, the EuO induces a magnetic proximity state into the graphene layer by interfacial hybridization. This new ferroelectric state in the EuO/graphene heterostructure is stable up to room temperature where it coexists with the EuO/graphene magnetic state. Furthermore, intertwined magneto-electric effects are shown in these strained heterostructures which can facilitate the manipulation of magnetization and electric polarization in future memory and neuromorphic devices., The authors thank the STnano clean room facility and the XRD platform of IPCMS for technical support as well as the Labex NIE for partial support. R.A. and S.H. acknowledge funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement number 889546, the Government of Aragon (DGA) through the project E13 23R, the Spanish MICIU with funding from European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon and by the Spanish MICIU (PID2019-104739GB-100/AEI/10.13039/501100011033, PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI /10.13039/501100011033). This study was supported by French state funds managed by the ANR more specifically within the grants MixDferro (ANR-21-CE09-0029) and 2DSwitch (ANR-21-CE09-0031). J.-F.D. also acknowledges a Junior grant from Institut Universitaire de France., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

UV to IR continuous photocatalytic gas-phase CO2 hydrogenation over Ni-doped molybdenum oxysulfide: An experimental and mechanistic study

  • Sanz-Marco, Arturo
  • Navarro-Ruiz, Javier
  • Hueso, José L.
  • Gerber, Iann C.
  • Sebastián, Víctor
  • Mossin, Susanne
  • Nielsen, David
  • Balas, Francisco
  • Santamaría, Jesús
The reduction of CO2 toward CO and CH4 over Ni-loaded MoS2-like layered nanomaterials is investigated. The mild hydrothermal synthesis induced the formation of a molybdenum oxysulfide (MoOxSy) phase, enriched with sulfur defects and multiple Mo oxidation states that favor the insertion of Ni2+ cations via photo-assisted precipitation. The photocatalytic tests under LED irradiation at different wavelengths from 365 to 940 nm at 250°C rendered 1% CO2 conversion and continuous CO production up to 0.6 mmol/(gcat h). The incorporation of Ni into the MoOxSy structure boosted the continuous production of CO up to 5.1 mmol/(gcat h) with a CO2 conversion of 3.5%. In situ spectroscopic techniques and DFT simulations showed the O-incorporated MoS2 structure, in addition to Ni clusters as a supported metal catalyst. The mechanistic study of the CO2 reduction reaction over the catalysts revealed that the reverse water–gas shift reaction is favored due to the preferential formation of carboxylic species., Financial supports from the Spanish Ministry of Science and Universities through CEX2023-001286-S, PID2020-114926RB-I00, and CTQ2016-77144-R research projects are gratefully acknowledged. Researchers also thank collaboration through InterPHOT thematic network and “Conexion Fotocatalisis” CSIC hub. A. Sanz thanks the financial support for the MICINN Scholarship. We thank Dr. S. Irusta for her assistance in preliminary XPS measurements. The synthesis of materials has been performed by the Platform of Production of Biomaterials and Nanoparticles of the NANBIOSIS ICTS, more specifically by the Nanoparticle Synthesis Unit of the CIBER in Bioengineering, Biomaterials & Nanomedicine (CIBER-BBN). The TEM images were taken at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia y Materiales de Aragón, Universidad de Zaragoza, Spain. The authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. J.N.-R. and I.C.G. thankfully acknowledge the computing resources through the “Calcul en Midi-Pyrénées” initiative CALMIP (projects p0812 and p1214), and CINES, IDRIS, and TGCC within the allocation 2022-A0120906649 carried out by GENCI., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vanadium incorporation in ferrite nanoparticles serves as an electron buffer and anisotropy tuner in catalytic and hyperthermia applications

  • Torres, Teobaldo E.
  • Valdés, Daniela Paola
  • Hettler, Simon
  • Nuñez, Jorge M.
  • Rodrigo, I.
  • Orue, Iñaki
  • García, J. Á.
  • Plazaola, F.
  • Zysler, Roberto Daniel
  • Lima Jr., Enio
  • Aguirre, Myriam H.
  • Goya, Gerardo F.
  • Arenal, Raúl
Cancer research has gradually shifted its focus from individual therapies to a combination of them for enhanced treatment effectiveness. In particular, the increased interest in the field of catalytic medicine through nanozymes proposes promising combinations with photothermal therapy, photodynamic therapy, and magnetic fluid hyperthermia (MFH). Nanozyme activity centers around the hydroxyl radical ˙OH, the most toxic of the reactive oxygen species (ROS). With a synergistic approach in mind, we studied VxFe3−xO4 magnetic nanoparticles (MNPs) as agents for ROS production and heating. These MNPs were exhaustively characterised both morphologically and magnetically. A compositional analysis through electron microscopy and spectroscopy unveils a core–shell structure with a V-rich shell. A study of the power absorption of these MNPs fixed into a gel matrix, emulating cytosol viscosity, provides values of up to 1000 W g−1 for samples with 0.5 wt% MNPs, an AC magnetic field amplitude of 65 mT and a frequency of 350 kHz, typical in the MFH application. A concentration of the ˙OH-adduct of up to 2300 nM has been measured through electron spin resonance analysis as a result of peroxidase-like activity. Through the comparison with similarly-sized ferrite MNPs, we determined that V incorporation lowers the magnetic anisotropy and serves as an electron buffer, explaining the enhanced MFH and ROS-production results., T. E. T. acknowledges funding from the European Union's Horizon Europe Research and Innovation program under the Marie Sklodowska-Curie grant agreement no. 101068591. D. P. V. and J. M. N. thank CONICET-Argentina for their doctoral fellowships. The authors acknowledge funding from projects H2020-MSCA-RISE-2021 ULTIMATE-I project no. 101007825 and H2020-MSCA-RISE-2020 101007629-NESTOR and Basque Government grant no. IT-1005-16. G. F. G. acknowledges the Spanish MICIU PID2019-106947RB-C21/AEI/10.13039/501100011033. R. A. acknowledges the Spanish MICIU (PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI/10.13039/501100011033), the U. Zaragoza (14446-UZ2023-CIE-02) and the DGA project E13-23R.TEM and XPS studies were conducted at the Laboratorio de Microscopias Avanzadas (LMA), U. Zaragoza, Spain., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Origin of intrinsically low thermal conductivity in a garnet-type solid electrolyte: Linking lattice and ionic dynamics with thermal transport

  • Wang, Yitian
  • Su, Yaokun
  • Carrete, Jesús
  • Zhang, Huanyu
  • Wu, Nan
  • Li, Yutao
  • Li, Hongze
  • He, Jiaming
  • Xu, Youming
  • Guo, Shucheng
  • Cai, Qingan
  • Abernathy, Douglas L.
  • Williams, Travis
  • Kravchyk, Kostiantyn V.
  • Kovalenko, Maksym V.
  • Madsen, Georg K.H.
  • Li, Chen
  • Chen, Xi
Understanding thermal transport in solid electrolytes is essential for improving the performance, reliability, and safety of all-solid-state batteries. Garnet-type lithium-ion conductors are promising candidates for solid electrolytes, yet their thermal-transport mechanisms remain poorly understood. Here, we connect the lattice and ion dynamics of single-crystal garnet-type Li6.5La3Zr1.5Ta0.5O12 to its intrinsically low thermal conductivity. Our study reveals that the single crystals grown by the floating-zone method exhibit remarkably low glasslike thermal conductivity. Using first-principles calculations and inelastic-neutron-scattering measurements, we identify both the acoustic and numerous optical phonon modes, which stem from the complex crystal structure of the material. Notably, a low-energy optical branch exhibits an avoided crossing with acoustic phonons near 7 meV. These optical modes can enhance the scattering of heat-carrying acoustic phonons and reduce thermal conductivity. Furthermore, the calculated Grüneisen parameters are large, especially for the vibrational modes around 6 meV, indicating strong anharmonicity, with a noticeable contribution from lithium-ion vibrations. A two-channel thermal-transport model is employed to describe the weak temperature dependence of the thermal conductivity, which can be attributed to the substantial contribution of diffuson transport facilitated by the abundance of optical phonons and intrinsic anharmonicity. These results offer valuable insights into the thermal transport in a broad class of ionic conductors of interest for energy conversion and storage applications., This work was supported by the National Science Foundation under Grants No. 2144328 and No. 1750786. X.C. and Y.W. acknowledge support from the Opportunity to Advance Sustainability Innovation and Social Inclusion (OASIS) internal funding award from the University of California, Riverside. Y.S., Q.C., and C.L. are supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences under Award Number DE-SC0023874. This study was also supported by the Ministry of Science and Innovation (MCIN) with funding from the European Union NextGenerationEU (PRTR-C17.I1), promoted by the Government of Aragon. J.C. acknowledges funding from Ministry of Science, Innovation, and Universities (MICIU)–State Research Agency (AEI) (DOI:10.13039/501100011033) through Grant No. CEX2023-001286-S. This research used resources at the High Flux Isotope Reactor and Spallation Neutron Source, a Department of Energy Office of Science User Facility operated by the Oak Ridge National Laboratory. The beam time was allocated to TAX on Proposal No. IPTS-28205.1 and to ARCS on Proposal No. IPTS-30640.1. Research conducted at ORNL’s HFIR and SNS was sponsored by the Scientific User Facilities Division, Office of Basic Energy Sciences, U.S. Department of Energy., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-quality epitaxial five-layer Aurivillius films with in-plane ferroelectricity for electrocaloric cooling

  • Lafuerza, Sara
  • Blasco, Javier
  • Evangelisti, Marco
  • Subías, Gloria
  • Gracia, David
  • Pardo, José M.
  • Barriuso, Eduardo
  • Torrelles, Xavier
  • Padilla Pantoja, Jessica
  • Caicedo, José Manuel
  • Santiso, José
High-quality purely c-axis oriented epitaxial thin films of the Aurivillius phase Sr2Bi4Ti5O18 with n = 5 (Sr,Bi)TiO3 perovskite-like layers, are grown on SrTiO3 substrates by pulsed laser deposition. The highest crystalline quality is obtained with a 20 wt.% Bi-excess target and average stacking order values in the proximity of the ideal value n = 5 are attained for an optimum deposition temperature of 650 °C. Scanning transmission electron microscopy reveals regions with n ranging from 4 to 6 around an average thickness of n = 5, in agreement with the X-ray diffraction analysis. Interdigital electrodes are used to probe the in-plane polarization and survey the electrocaloric properties. A maximum adiabatic temperature change of ΔT ∼ 0.95 °C for an electric field of 150 kV cm−1 is observed at ≈135 °C. Larger values are expected at higher temperatures around the ferroelectric Curie temperature, TC. Since TC of Sr2Bi4Ti5O18 can be tuned by codoping, the findings pave the way toward a large electrocaloric effect at ambient temperature., S.L. acknowledges funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 101029019. This work was also supported by Ministerio de Ciencia, Innovación y Universidades (PID2021-124734OB-C21), “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2023-001286-S, CEX2023-001263-S and CEX2021-001214-S) and Diputación General de Aragón (E11-23R, E12-23R). D. G. acknowledges financial support from the Gobierno de Aragón through a doctoral fellowship. Authors would like to acknowledge C. Cosculluela from Unidad Técnica en Ingeniería de Microdispositivos (INMA) and R. Valero for the IDEs fabrication at the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas”, through Servicio General de Apoyo a la Investigación from Universidad de Zaragoza. The authors also acknowledge the use of instrumentation as well as the technical advice provided by the Joint Electron Microscopy Center at ALBA (JEMCA) and funding from Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya. J. S. acknowledges B. Mundet, F. Belarre and M. Rosado for the STEM images and FIB fabrication of the lamellas, as well as the financial support of the European Commission through the Horizon H2020 funding by H2020-MSCA-RISE-ID:101007825 –ULTIMATE-I. X. T. acknowledges financial support by Ministerio de Ciencia, Innovación y Universidades (PID2021-123276OB-I00)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001286-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Triple-Site Gd3 Carborane Metal-Organic Framework toward Scalable Quantum Computing

  • Bartolomé, Elena
  • Li, Xiao-Bao
  • Arauzo, Ana
  • Luzón, Javier
  • García Rubio, Inés
  • Giner Planas, José
Metal-organic frameworks (MOFs) incorporating arrays of molecular spin qubits (quMOFs) offer a promising pathway toward scalable quantum computing. In this work, we introduce a novel quMOF, {[(Gd)3(mCB-L)4(NO3)(DMF)x]n·Solv}, constructed with a carborane linker and Gd(III) ions at three distinct coordination sites. We thoroughly characterize its magneto-thermal properties using dc/ac magnetometry, X-ray absorption spectroscopy, X-ray magnetic circular dichroism, and heat capacity measurements. The quantum computing potential is demonstrated through ab initio calculations and pulsed electron paramagnetic resonance on GdY-diluted analogues, revealing Tm= 0.7 μs and Rabi oscillations persisting up to 50 K. Each of the three isolated Gd(i) sites in GdY-MOFs functions as an 8-level qudit, accessible via X-band transitions. Notably, the triple-site Gd3 quMOF provides an unprecedented qudit with d = (2S + 1)3 = 512 states, capable of encoding up to 9 qubits, marking a significant advance in the scalability of molecular-based quantum computing systems., This work was financially supported by Spanish MCIN (PID2022-138492NB-I00, PID2022-136892NB-I00 and PID2021-127287NB-I00), the Generalitat de Catalunya (2021/SGR/00442), and the Gobierno de Aragón (RASMIA E12-23, and E09-23R). E.B., J.G.P., A.A., and I.G.-R. acknowledge financial support from the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S and CEX2023-001286-S, funded by MICIU/AEI/10.13039/501100011033). The authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza, and the financial support from MCIN with resources from European Union NextGeneration EU (PRTR-C17.I1) promoted by the Government of Aragón. X.-B.L. acknowledges the China Scholarship Council (CSC) for his PhD grant (202106650003). XAS and XMCD experiments were performed at the BOREAS beamline of the ALBA synchrotron with the support of ALBA staff (experiment number 2022085925)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Computing anharmonic infrared spectra of polycyclic aromatic hydrocarbons using machine learning molecular dynamics

  • Mai, Xinghong
  • Wang, Zhao
  • Pan, Lijun
  • Schörghuber, Johannes
  • Kovács, Péter
  • Carrete, Jesús
  • Madsen, Georg K.H.
We introduce a machine learning molecular dynamics (MLMD) approach to calculate the anharmonic infrared (IR) absorption spectra of polycyclic aromatic hydrocarbons (PAHs), key carriers of interstellar aromatic IR bands. This method accounts for temperature effects in a molecule-specific way and achieves accuracy comparable to conventional quantum chemical calculations at a fraction of the cost, scaling linearly with system size. We applied MLMD to calculate the anharmonic spectra of 1704 PAHs in the NASA Ames PAH IR Spectroscopic Data base with up to 216 carbon atoms at different temperatures, demonstrating its capability for high-throughput spectral calculations of large molecular systems. Our results highlight MLMD’s potential to enable the development of extensive molecular spectral data sets, enhancing data-driven analyses of astronomical IR spectra, particularly in anticipation of upcoming observations from the James Webb Space Telescope., The authors acknowledge financial support from the National Natural Science Foundation of China (grant no. 12463005 and 11964002). This work was supported by the Guangxi Talent Programme (Highland of Innovation Talents). This study was also supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) promoted by the Government of Aragon. JC acknowledges funding from MICIU/AEI (DOI:10.13039/501100011033) through grant CEX2023-001286-S. GKHM and JS acknowledge funding from the Austrian Science Fund (FWF) 10.55776/COE5., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

2D versus 3D tumor-on-chip models to study the impact of tumor organization on metabolic patterns in vitro

  • Guerrero-López, Paula
  • Martín-Pardillos, Ana
  • Bonet-Aleta, Javier
  • Mosseri, Andrea
  • Hueso, José L.
  • Santamaría, Jesús
  • García-Aznar, José Manuel
The datasets used and/or analyzed during the current study available from the corresponding author on reasonable request., Despite the limitations of in vitro models to investigate cancer cell metabolism, their study can provide new insights essential for understanding tumorigenesis and effectively aiding in the development of novel therapies. The innovative tumor-on-chip models offer a more physiologically relevant platform than the traditional 2D cultures. These 3D cultures incorporate cell–cell and cell–matrix interactions, as well as diffusion dynamics through both the matrix and tumor spheroid, modeling in vivo diffusion within the tumor. Therefore, this work focuses on a quantitative comparison between 2D and 3D cultures through a microfluidic chip that allows daily monitoring of cancer cell key metabolites such as glucose, glutamine and lactate, unveiling critical differences. Our analysis reveals reduced proliferation rates in 3D models, likely due to limited diffusion of nutrients and oxygen. Additionally, 3D cultures showed distinct metabolic profiles, including elevated glutamine consumption under glucose restriction and higher lactate production, indicating an enhanced Warburg effect. The microfluidic chip enabled continuous monitoring, revealing increased per-cell glucose consumption in 3D models, highlighting fewer but more metabolically active cells than in 2D cultures. These findings underscore the importance of using microfluidic-based 3D models to provide a more accurate representation of tumor metabolism and progression compared to traditional 2D cultures., This work is part of the project PID2021-122409OB-C21 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU”. Some of the results used in this article were obtained within the Catalytic Dual-Function Devices Against Cancer (CADENCE) project (G.A.: 742684) RLDI/2015-021 financed by the European Research Council (ERC). P.G-L. gratefully acknowledges the support of the Government of Aragon (Grant No 2021-25). The study is also supported by Research Group T50_23R. J.B-A. acknowledges the Spanish Government for an FPU predoctoral contract. The synthesis of materials has been performed by the Platform of Production of Biomaterials and Nanoparticles of the NANBIOSIS ICTS, more specifically by the Nanoparticle Synthesis Unit of the CIBER in BioEngineering, Biomaterials & Nanomedicine (CIBER-BBN). Grant CEX2023-001286-S supported by MICIU/AEI /10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A linear {FeIII2NiII} cluster, a structurally closely related quasi 1D {FeIII2NiII} chain

  • Charkiolakis, Emmanouil K.
  • Gracia, David
  • Ubach I Cervera, Marc
  • Evangelisti, Marco
  • Milios, Constantinos J.
The solvothermal reaction between FeCl3·6H2O, NiCl2·6H2O, 2-hydroxynaphthaldehyde, and glycine (gly) in MeOH results in the formation of the trinuclear heterometallic cluster [FeΙΙΙ2NiΙΙ(L1)4(MeOH)4] (1) in good yield, while the same reaction upon replacing gly with methyl-alanine (mAla), results in the formation of the closely related quasi 1D coordination polymer {[FeΙΙΙ2NiΙΙ(L2)4(MeOH)2]n} (2) (L1, L2: the dianionic form of the Schiff-base ligand derived from the condensation of 2-hydroxynaphthaldehyde and gly (L1 for 1), or mAla (L2 for 2)). The structure of 1 describes a linear trimetallic {FeIII2Ni} unit, whereas complex 2 consists of repeating linear {FeIII2Ni} units with each one connected to two neighboring units via four coordination bonds, forming a quasi-1D chain. The structural similarity between complex 1 and the repeating unit of complex 2 is remarkable. However, their magnetic properties differ significantly, with complex 1 displaying dominant ferromagnetic interactions, and complex 2 showing antiferromagnetic interactions., This work has received support from EU (MSCA-DN MolCal,101119865), MICIU/AEI/10.13039/501100011033/, and ERDF/EU (PID2021-124734OB-C21, CEX2023-001286-S), Gobierno de Aragón (E11-23R, E12-23R)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Amphiphilic zeolitic imidazolate framework for improved CO2 separation in PIM-1 mixed matrix membranes

  • Pérez-Miana, Marta
  • Luque-Alled, José Miguel
  • Mayoral, Álvaro
  • Martínez-Visus, Iñigo
  • Foster, Andrew B.
  • Budd, Peter M.
  • Coronas, Joaquín
This study aims to enhance the compatibility between filler and polymer in mixed matrix membranes (MMMs), addressing an important challenge in membrane development. ZIF-94, known for its affinity to CO2, was partially modified with 2-undecylimidazolate (umIm) through the solvent-assisted ligand exchange (SALE) method to improve its compatibility with the prototypical polymer of intrinsic microporosity PIM-1. The modified ZIF-94 (ZIF-94-umIm) can be considered as an amphiphilic MOF with both hydrophilic and hydrophobic moieties, while maintaining a considerably high CO2 adsorption capacity (2.34 mmol g-1 at 90 kPa and 0 °C). Gas separation experiments were performed using mixed gas compositions of 15/85 CO2/N2 at 3 bar and 35 °C. The resulting MMM with a 5 wt.% loading exhibited an enhanced CO2 separation performance, with ca. 70% and 10% increases in CO2 permeability (8900 Barrer) and CO2/N2 selectivity (20.2), respectively, compared to pristine PIM-1 membranes. In addition, thin film nanocomposite membranes were prepared showing a 23.5 CO2/N2 selectivity at 2350 GPU of CO2. This modification strategy shows a great potential for improving the CO2 capture technologies, highlighting the potential of tailoring MOF fillers for advanced membrane materials in gas separation applications., This work acknowledges grants PID2022-138582OB-I00 (funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”), TED2021-130621B-C4 (funded by MCIN/AEI/10.13039/501100011033/ and the European Union-NextGeneration EU), and CEX2023-001286-S (funded by MICIU/AEI /10.13039/501100011033). Financial support from the Aragón government (GA), T68-23R, and M. P.-M. PhD grant, is also gratefully acknowledged. J. M. Luque-Alled acknowledges the Spanish Ministerio de Universidades and the European Union-NextGenerationEU Fund for funding through the Margarita Salas and Juan de la Cierva-Formación programmes. A. Mayoral acknowledges the Spanish MCN (RYC2018-024561-I and CNS2023-144346) and GA (E13_23R). A.B. Foster acknowledges EPSRC Programme Grant EP/V047078/1 “SynHiSel”., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A review of silica-based nanoplatforms for anticancer cargo delivery

  • Mosseri, Andrea
  • Sánchez-Uriel, Leticia
  • García-Peiro, José I.
  • Hornos, Felipe
  • Hueso, José L.
This article belongs to the Special Issue Molecular Scale Design, Synthesis, and Application of Macroporous, Mesoporous, and Microporous Materials., Stimuli-responsive silica nanoparticles have emerged as a promising platform for the targeted and controlled delivery of therapeutic agents in cancer therapy. These nanoparticles possess unique physicochemical properties that allow for the stimuli-triggered release of loaded cargos, such as drugs, enzymes, oligonucleotides, photosensitizers, and metals. The stimuli-responsive nature of these nanoparticles enables them to respond to specific internal and external signals within the tumor microenvironment, including pH, temperature, and redox potential, among others. This leads to the enhanced targeting of cancer cells and improved therapeutic efficacy while minimizing the off-target effects. This review highlights recent advances in the development and application of stimuli-responsive silica nanoparticles for the delivery of multiple active agents for cancer therapy. Overall, stimuli-responsive silica nanoparticles offer great potential for the development of more effective cancer therapies with improved selectivity and reduced side effects., This research received the Severo Ochoa funds provided by Ayuda CEX2023-001286-S, funded by MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

B/N-doped carbon nano-onions as nanocarriers for targeted breast cancer therapy

  • Mohan, Hugh
  • Salaroglio, Iris Chiara
  • Bartkowski, Michał
  • Courtney, Kellyjean
  • Andreana, Ilaria
  • Limongi, Tania
  • Arenal, Raúl
  • Riganti, Chiara
  • Arpicco, Silvia
  • Giordani, Silvia
Cancer is one of the leading causes of death worldwide and represents a significant burden on global health systems. Many existing chemotherapy treatments come with severe side effects, ranging from hair loss to cardiotoxicity, and many types of cancer express chemotherapy resistance, such as triple-negative breast cancer. This study presents a novel boron/nitrogen-doped carbon nano-onion (BN-CNO) based nanocarrier system that can deliver doxorubicin (DOX) to cancer cells via a pH-dependent drug release mechanism. The nanocarrier formulation consists of a hyaluronic acid/phospholipid conjugate (HA-DMPE) that is non-covalently bound to the BN-CNOs upon which DOX is loaded via π–π stacking interactions. The HA-DMPE/BN-CNO/DOX system enhances the uptake and anticancer effects of DOX in MDA-MB-468 and MDA-MB-231 TNBC cells whilst reducing the cardiotoxicity of DOX in AC-16 human cardiomyocytes., This work was supported by Science Foundation Ireland (22/FFP-A/11067). Financial support from the Irish Research Council (GOIPG/2021/210 to H. M.), from the School of Chemical Sciences (SCS) at DCU (research assistantship to K. C.), from the Italian Ministry of University and Research (PRIN 2022ZBZFX3 to S. A. and C. R.) and from the Italian Association for Cancer Research (IG29250 to C. R.) are gratefully acknowledged. R. A. acknowledges funding from the Government of Aragon (DGA) through the project E13_23R, the Spanish MICIU with funding from European Union Next Generation EU (PRTR-C17.I1) promoted by the Government of Aragon and by the Spanish MICIU (PID2019-104739GB-100/AEI/10.13039/501100011033, PID2023-151080NB-I00/AEI/10.13039/501100011033 and CEX2023-001286-S MICIU/AEI 10.13039/501100011033). The TEM and XPS works were conducted in the Laboratorio de Microscopias Avanzadas (LMA) at the Universidad de Zaragoza. AFM and UV-vis absorption spectroscopy was performed in the Nano Research Facility (NRF) in DCU. DLS, ZP, and FTIR spectroscopy was performed at the SCS, DCU. This article is based upon work from COST Action CA21126 - Carbon molecular nanostructures in space (NanoSpace), supported by COST (European Cooperation in Science and Technology)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Catechol-substituted siderophore colistin exhibits superior antimicrobial activity than its unmodified polypeptide counterpart

  • Bescós, Sara
  • Gámez Herrera, Enrique
  • Encabo-Berzosa, M. Mar
  • Piñol, Milagros
  • Oriol, Luis
  • Arruebo, Manuel
The corresponding author will provide the datasets created and/or analyzed during the current study upon reasonable request., Catechol moieties have been covalently coupled to the last-resort polypeptide antibiotic colistin via esterification and amidation reactions, inspired by the superior antimicrobial action of cefiderocol, i.e., a catechol-substituted siderophore cephalosporin. Among the tested strategies, the incorporation of the catechol motif by amidation reduces by 50% the minimum concentration to inhibit the growth of a clinical strain of uropathogenic Escherichia coli (E. coli) in its planktonic form. Its minimum bactericidal concentration is reduced by 25% after chemical modification. The tested modified antibiotic did not show cytotoxicity against human fibroblasts and keratinocytes at bactericidal doses. Additionally, due to the potential nephrotoxicity of colistin, the cytotoxicity of this catechol-substituted siderophore colistin was evaluated in a 3D model of human renal organoids showing no cytotoxicity at the doses tested. The chemical incorporation of catechol groups to existing antibiotics can reduce the doses to exert a fast antimicrobial action reducing the chances to develop antibiotic resistance., This work was financially supported by Spanish Ministry of Science and Innovation (MICINN) (Grants: PID2021-126132NB-I00 and PID2023-146091OB-I00), the “Grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033”https://doi.org/10.13039/501100011033” and Gobierno de Aragón-FSE (E47_23R research group)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed