Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of soluble pyridinium-containing copolyimides

  • Hubina, Anastasiia
  • Lobko, Yevheniia
  • Hnat, Jaromir
  • Merna, Jan
  • Bouzek, Karel
  • Darabut, Alina Madalina|||0000-0002-1595-6094
[EN] Novel ionene-type cationic copolyimides based on 4,4 '-oxydiphthalic anhydride (ODPA), 4,4 '-(1,4-phenylenediisopropylidene)bisaniline (BIS P), and 2,6-diaminopyridine (DAP) were synthesized. The copolyimides were obtained in two stages: first, the copolyimides with the 0/1, 0.2/0.8, 0.3/0.7, 0.5/0.5, 0.6/0.4 and 1/0 DAP/Bis P ratios were obtained through thermal imidization, and then quaternization of soluble copolyimides with methyl iodide was conducted for 24 or 48 h. The samples were characterized via FTIR, NMR and EDX methods to confirm their structure and composition. The cationic copolyimides with a DAP content of less than 0.3 showed initial weight loss (onset) at about 250 degrees C, according to TGA results and demonstrated solubility in chloroform. The highest ionic conductivity value of 0.234 S cm-1 was showed by the sample with 0.3 DAP content and 0.15 degree of quaternization. The stability of the membranes in alkaline media was evaluated using FTIR and TGA. It was shown that samples with a DAP content of more than 0.3 lost their integrity probably owing to partial hydrolysis of imide rings, while copolyimides with a DAP content of 0.2 and 0.3 remained stable., The authors thank prof. P. Sysel for the advice and discussion of the experimental part and results. This work was supported through the MSCA4Ukraine project, which is funded by the European Union (Grant number 1232813) and the project "The Energy Conversion and Storage" No. CZ.02.01.01/00/22_008/0004617 by Programme Johannes Amos Comenius, call Excellent Research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sensitivity of the Hyper-Kamiokande experiment to neutrino oscillation parameters using accelerator neutrinos

  • Abe, K.
  • Afif, M. T.
  • Ahl Laamara, R.
  • Aihara, H.
  • Ajmi, A.
  • Akutsu, R.
  • Alarakia-Charles, H.
  • Hakim, Y. Alj
  • Alonso Monsalve, S.
  • Amato, E.
  • Ameli, F.
  • Anthony, L.
  • Araya, A.
  • Arguello Quiroga, A.
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] This paper presents the expected sensitivity to the neutrino oscillation parameters of the Hyper-Kamiokande long-baseline program. The Hyper-Kamiokande experiment, currently under construction in Japan, will measure the oscillations of accelerator-produced neutrinos with thousands of selected events per sample: this corresponds to an increase of statistics of a factor 25-100 with respect to recent results from the currently-running long-baseline neutrino oscillation experiment in Japan, T2K. In the most favorable scenario we will achieve the discovery of Charge-Parity (CP) violation in neutrino oscillation at 5 sigma C.L. in less than 3 years. With 10 years of data-taking, and assuming a neutrino : antineutrino beam running ratio of 1:3, a CP violation discovery at 5s C.L. is possible for more than 60% of the actual values of theCP-violating phase, delta(CP). Moreover, we will measure dCP with a precision ranging from 20., in the case of maximal CP violation, to 6 degrees, in the case of CP conservation. We aim to achieve a 0.5% resolution on the Delta m(32)(2) parameter, and a resolution between 3% and 0.5% on the sin(2)sigma(23) parameter, depending on its true value. These results are obtained by extending the analysis methods of T2K with dedicated tuning to take into account the Hyper-Kamiokande design: the larger far detector, the more powerful beam, the upgraded near detector ND280, and the planned additional Intermediate Water Cherenkov Detector., The Hyper-Kamiokande Collaboration would like to thank the Japanese Ministry of Education, Culture, Sports, Science and Technology (MEXT), the University of Tokyo, Japan Society for the Promotion of Science (JSPS), the Kamioka Mining and Smelting Company, Japan; the Minister of Education, Science, Culture and Sports, grant 21T-1C333, Armenia; CNPq and CAPES, Brazil; Ministry of Education Youth and Sports of the Czech Republic (FORTE CZ.02.01.01/00/22_008/0004632); CEA and CNRS/IN2P3, France; the INFN, Italy; the National Science Foundation, the Korea NationalResearch Foundation (No. NRF2022R1A3B1078756), Korea; CONAHCyT for supporting the national projects CBF2023-2024427, and CF-2023-G-643., Mexico; Ministry of Science and Higher Education (2022/WK/15) and the National Science Centre (UMO2022/46/E/ST2/00336), Poland; MICIU, Spain andNextGenerationEU/PRTR, EU, Spain; ETHZ, SERI and SNSF, Switzerland; STFC and UKRI, UK. We also thank CERN for use of the Neutrino Platform. In addition, the participation of individual researchers and institutions has been further supported by funds from Charles University (Grant PRIMUS 23/SCI/025 and Research Center UNCE/24/SCI/016), Czech Republic; H2020-MSCA-RISE-2019 SK2HK no 872549 and H2020 Grant No. RISE-GA822070-JENNIFER2 2020, Europe; JSPS KAKENHI Grant JP24K17065; National Research Foundation of Korea (NRF-2022R1A5A1030700, NRF-2022R1A3B1078756) funded by the Ministry of Science, Information and Communication Technology (ICT) and the Ministry of Education (RS-2024-00442775), Korea; AssociateDean of Research and Scientific Graduate Studies, Dr. Daniel A. Jacobo-Velazquez, for his support and also to CONAHCyT for the postgraduate scholarship 835328; Rector of the CUCEI, Dr. Marcos Perez, for his financial and logistical support and CONAHCyT for the information technologies doctoral scholarship 792151, Mexico; Ministry of Science and Higher Education, Republic of Poland, "International co-financed projects", grant number 5316/H2020/2022/2023/2, Poland; LSC funds from MICIU, DGA and UZ, Spanish Ministry of Science and Innovation PID2022-136297NB-I00/AEI/10.13039/501100011033/FEDER, UE; CERCA program of the Generalitat de Catalunya; Plan de Doctorados Industriales of the Research and Universities Department of the Catalan Government (2022 DI 011); MICIIN; European Union NextGenerationEU(PRTR-C17.I1); generalitad de Catalunya; Spanish Ministry of Innovation and Science under grants MCINN-23-PID2022-139198NB-I00 and PID2021124050NB-C31, Spain; SNF 20FL20-216674, SNF 200021 L-231581 and SNFPCEFP2-203261, Switzerland; the LeverhulmeTrustResearch Fellowship Scheme and the UKRI Future Leaders Fellowship grant number MR/S034102/1, UK. The Hyper-Kamiokande Collaboration would like to thank the T2K Collaboration for providing the models and simulated samples used as a basis in this paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of titanium-based supports on the electrochemical activity and stability of iridium nanoparticle catalysts for OER in PEM water electrolyzer

  • Blanco Redondo, Lucinda
  • Lobko, Yevheniia V.
  • Nováková, Jaroslava
  • Dinhová, Thu Ngan
  • Vorokhta, Maryna
  • Gamon Rodriguez, Miquel
  • Dopita, Milan
  • Mazur, Michal
  • Hranícek, Jakub
  • Yakovlev, Yurii
  • Hrbek, Tomás
  • Matolín, Vladimír
  • Matolínová, Iva
  • Darabut, Alina Madalina|||0000-0002-1595-6094
[EN] Efficient and stable oxygen evolution reaction catalysts are essential for advancing hydrogen production through water electrolysis. This study investigates the role of titanium-based supports ¿ TiO2, TiC, and TiN ¿ in enhancing the activity and stability of iridium (Ir) nanoparticles, focusing on their morphological, chemical, and electrochemical properties. In a half-electrochemical cell, iridium supported on titanium dioxide (Ir/TiO2) and titanium carbide (Ir/TiC) exhibited excellent OER performance with an overpotential of 260 mV and 259 mV at 10 mA cm¿ 2 , respectively, which are comparable to unsupported Ir black nanoparticles (253 mV). In contrast, Ir supported on titanium nitride (Ir/TiN) showed a higher overpotential of 329 mV. The catalytic performance of these materials was further evaluated in a single-cell proton exchange membrane water electrolyzer. Postmortem analyses of the membrane electrode assemblies revealed support-specific degradation pathways, including oxidation and dissolution processes. The findings highlight the influence of support material properties ¿ such as conductivity, crystallinity, and composition ¿ on the efficiency and durability of Ir nanoparticles. These insights provide a valuable foundation for designing advanced catalytic materials for water electrolyzers., The authors acknowledge financial support from the European Regional Development Fund (ERDF) and the European Social Fund Plus (ESF+), under the Programme Johannes Amos Comenius (OP JAK), project The Energy Conversion and Storage (CZ.02.01.01/00/22_008/0004617). Michal Mazur acknowledges funding from the European Structural and Investment Funds, Operational Programme Research, Development and Education (OP VVV), project Excellent Research Teams (CZ.02.1.01/0.0/0.0/15_003/0000417-CUCAM).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Floodplain Conservation Versus Landscape Development-How to Tackle the Multifunctional Management Issue

  • Jakubinsky, Jiri
  • Prokopova, Marcela
  • Stammel, Barbara
  • Babej, Jan
  • Bezak, Nejc
  • Borgwardt, Florian
  • Bussettini, Martina
  • Camporeale, Carlo
  • Cudlin, Pavel
  • Fink, Sabine
  • Kidova, Anna
  • Pechanec, Vilem
  • Potocki, Kristina
  • Palau-Salvador, Guillermo|||0000-0003-0492-6567
  • Sanchis Ibor, Carles|||0000-0002-8795-2922
  • Vezza, Paolo
[EN] Ecosystems lining rivers perform a number of functions making it reasonable to protect them from significant degradation. A natural characteristic of floodplains is their regular inundation, during which sediments, wood and nutrients are eroded, mobilized or deposited, thereby restoring these valuable ecosystems. However, the key attributes of floodplains, such as fertile soil, flat terrain, availability of water, sediments and wood, are also the subjects of human exploitation. The flood control embankments in urban and agricultural areas are justified and effective solutions to reduce flood risk. However, when combined with unnaturally incised and enlarged river channels, they are limiting natural flooding and connectivity of floodplains is fundamentally degraded. To analyze different approaches to floodplain protection, we conducted a review supported by the expertise of specialists in selected countries of Central and Southern Europe. We concluded that in most of these countries, there is no targeted protection of floodplains as an ecological phenomenon. Comprehensive protection is mostly only afforded to small-scale areas, valued due to the occurrence of Europe's most threatened species and habitats (Natura 2000 network). Except for segments of a few large rivers, these sites are not connected and therefore significant support for the longitudinal continuity of water-dependent ecosystems cannot be expected. This inevitably leads to the gradual degradation of floodplain ecosystem functions and services. The floodplain management in non-urban areas, wherever natural spillover of floods to the surroundings is possible and where floodplains have been inappropriately embanked, seems to be a suitable solution for supporting the ecological functionality of these ecosystems. This article is categorized under: Water and Life > Stresses and Pressures on Ecosystems Water and Life > Conservation, Management, and Awareness Water and Life > Nature of Freshwater Ecosystems, This research has been supported by the Ministry of Education, Youth and Sports of the Czech Republic (grant AdAgriF-Advanced methods of greenhouse gases emission reduction and sequestration in agriculture and forest landscape for climate change mitigation-CZ.02.01.01/00/22_008/0004635), the Technology Agency of the Czech Republic and the Ministry of the Environment of the Czech Republic (grant SS05010134; Importance and protection of floodplains as an environment for the fulfillment of the landscape ecostabilisation function). This research was also supported by the Slovak Research and Development Agency under the project APVV-22-0428. N. Bezak's contribution was supported by ARIS through grant P2-018.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Open Framework Structure of the New Pure-Germania Zeolite ITQ-35 Solved by 3D Electron Diffraction

  • Tirado-Castaño, Juan Ignacio
  • Das, Partha Pratim
  • Palatinus, Luká
  • Nicolopoulos, Stavros
  • Valero-Jiménez, José
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Cantin Sanz, Angel|||0000-0002-3219-1919
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] A pure open-framework germanate material is obtained using an organic structure directing agent (OSDA) prepared by a photochemically induced[2 + 2] cycloaddition reaction. The structure of this new material, named ITQ-35, is determined by combining precession electron diffraction tomography (PEDT) and powder X-ray diffraction (PXRD) methods. This material presents tridirectional 8-ring pores connected by 12-ring channels, with one of the lowest framework densities reported until now for a pure germania zeolitic material (12.7 T/1000 & Aring;3), and similar to that of the aluminogermanate PKU-9, The authors thank CTI-CSIC and ASIC-UPV for computational facilities. Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S and PID2022-136934OB-100 grants funded by MCIN/AEI/10.13039/ 501100011033 funded by "ERDF A way of making Europe" and TED2021-130191B-C41 grant funded by the European Union Next Generation EU/PRTR) is gratefully acknowledged. The authors also thank the financial support of the Generalitat Valenciana (Prometeo 2021/077). J.I.T. thanks the financial support from the Severo Ochoa Program PRE2018-083623. This study forms part of the Advanced Materials programme and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/012 and MFA/2022/047). The authors acknowledge the Electron Microscopy Service of the Polytechnic University of Valencia (UPV) for assistance in electron microscopy characterization. The electron diffraction experiments at the Institute of Physics of the Czech Academy of Sciences were performed within the project Terafit CZ.02.01.01/00/22_008/0004594 and supported by the CzechNanoLab project LM2023051, both funded by MEYS CR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Investigation of fuel cell behavior with different catalyst loadings at varying humidities and temperatures

  • Yakovlev, Yurii
  • Lobko, Yevheniia V.
  • Gamon Rodriguez, Miquel
  • Blanco Redondo, Lucinda
  • Kalabis, David
  • Matolínová, Iva
  • Darabut, Alina Madalina|||0000-0002-1595-6094
[EN] Proton exchange membrane fuel cells (PEMFCs) suffer from severe performance losses under low-humidity conditions, which limits their deployment in portable and open-cathode systems without external humidifiers. In this study, we systematically investigate the combined effects of platinum (Pt) loading (0.2¿1.0 mgPt cm¿2), ionomer-to-carbon (I/C) ratio (0.6 and 0.8), and operating conditions (0¿100 % RH, 40¿70 °C) using commercial catalyst materials. We find that performance does not peak at full humidification but instead at intermediate RH values (50¿75 %), with the optimum shifting lower as Pt loading increases. An intermediate loading (0.4 mgPt cm¿2) maximizes performance by balancing ORR kinetics, proton resistance, and water management. Increasing I/C ratio to 0.8 impairs performance under high humidity but substantially improves both water retention and durability under dry conditions by slowing electrochemically active surface area loss. These results establish clear design principles linking catalyst layer composition to operating environment, providing guidelines for reliable PEMFC operation in practical low-humidity applications such as UAVs and portable devices., The work was financially supported the Czech Science Foundation, project No. 22-03643S, structural fund project PaC-NG No. CZ.02.1.01/0.0/0.0/16_025/0007414 and The Energy Conversion and Storage , funded as project No. CZ.02.01.01/00/22_008/0004617 by Programme Johannes Amos Comenius, call Excellent Research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A photodetector based on the non-centrosymmetric 2D pseudo-binary chalcogenide MnIn2Se4

  • Serra, Marco
  • Antonatos, Nikolas
  • Lajaunie, Luc
  • Weng, Mouyi
  • Bastonero, Lorenzo
  • Sarkar, Kalyan Jyoti
  • Gusmao, Rui
  • Luxa, Jan
  • Bartoszewicz, Rafal
  • Ziembicki, Jakub
  • Plutnarová, Iva
  • Marzari, Nicola
  • Kudrawiec, Robert
  • Sofer, Zdenek
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Due to their attractive band gap properties and van der Waals structure, 2D binary chalcogenide materials have been widely investigated in the last decade, finding applications in several fields such as catalysis, spintronics, and optoelectronics. Ternary 2D chalcogenide materials are a subject of growing interest in materials science due to their superior chemical tunability which endows tailored properties to the devices prepared thereof. In the family of AIIBIII2XVI4, ordered ZnIn2S4-like based photocatalytic systems have been studied meticulously. In contrast, reports on disordered phases appear to a minor extent. Herein, a photoelectrochemical (PEC) detector based on the pseudo-binary MnIn2Se4 system is presented. A combination of optical measurements and DFT calculations confirmed that the nature of the bandgap in MnIn2Se4 is indirect. Its performance outclasses that of parent compounds, reaching responsivity values of 8.41 mA W-1. The role of the non-centrosymmetric crystal structure is briefly discussed as a possible cause of improved charge separation of the photogenerated charge carriers., Z. S. was supported by the ERC-CZ program (project LL2101) from the Ministry of Education Youth and Sports (MEYS). We acknowledge funding from the European Union through the 2D-PRINTABLE project (GA-101135196). This work was supported by the project "The Energy Conversion and Storage" funded as project no. CZ.02.01.01/00/22_008/0004617 by Programme Johannes Amos Commenius, call Excellent Research. N. A. acknowledges funding from the National Science Centre (NCN) Poland SONATA 19 Grant no. 2023/51/D/ST11/02588 and at Wroclaw University of Science and Technology, and this work was supported by the National Science Centre (NCN) Poland OPUS 23 no. 2022/45/B/ST7/02750. Calculations have been carried out using resources provided by Wroclaw Centre for Networking and Supercomputing. L. L. acknowledges funding from the Spanish Ministerio de Economia y Competitividad, the Ministerio de Ciencia e Innovacion MCIN/AEI/10.13039/501100011033/FEDER UE, and the European Union "NextGenerationEU"/PRTR (PID2022-140370NB-I00, RYC2021-033764-I, CPP2021-008986). The (S)TEM measurements were performed at the National Facility ELECMI ICTS ("Division de Microscopia Electronica", Universidad de Cadiz, DME-UCA). Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). J. A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/PRTR). L. B. and N. M. gratefully acknowledge support from the Deutsche Forschungsgemeinschaft (DFG) under Germany's Excellence Strategy (EXC 2077, no. 390741603, University Allowance, University of Bremen) and Lucio Colombi Ciacchi, the host of the "U Bremen ExcellenceChair Program". N. M. acknowledges support by the NCCR MARVEL, a National Centre of Competence in Research, funded by the Swiss National Science Foundation (grant number 205602). K. J. S. was supported by the Johannes Amos Comenius Programme, European Structural and Investment Funds, project CHEMFELLS VI (no. CZ.02.01.01/00/22_010/0008122).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Defect investigation in irradiated ATLAS18 ITk Strip Sensors using transient spectroscopy techniques

  • Klein, C. T.
  • Cindro, V.
  • Dandoy, J.
  • Fadeyev, V.
  • Federičová, P.
  • Jessiman, C.
  • Keller, J. S.
  • Koffas, T.
  • Kroll, J.
  • Kvasnička, J.
  • Mandić, I.
  • Mikeštíková, M.
  • Staats, E.
  • Ullán Comes, Miguel
  • Unno, Y.
  • Zhao, Y.
With the upgrade of the LHC to the High-Luminosity LHC (HL-LHC), the Inner Detector will be replaced with the new all-silicon ATLAS Inner Tracker (ITk). Comprising an active area of 165m<sup>2</sup>, the outer detector layers will host strip modules, built with single-sided micro-strip sensors. The ATLAS18 main sensors were tested at different institutes in the collaboration for mechanical and electrical compliance with technical specifications, while technological parameters were verified on test structures from the same wafers before and after irradiation. Diodes fabricated as test structures were studied using variants of Deep-Level Transient Spectroscopy (DLTS). Irradiated diode samples were measured with Current-DLTS, using both electrical and photo-induced injection. Utilizing DLTS spectra with varying test parameters, trap energy levels and cross-sections associated with defects were obtained. This was done to improve the precision of sensor simulations as well as to compile a more complete model of radiation damage in ITk Strip Sensors. Moreover, previously observed features such as an increasing trend in the full depletion voltage after irradiation and little beneficial annealing in charge collection after high fluence irradiation of high energy protons were also investigated. Results obtained for samples with radiation damage from different sources at various fluences were compared., Funding text 1 This work was supported by the Canada Foundation for Innovation and the Natural Sciences and Engineering Research Council of Canada; the Spanish R&D grant PID2021-126327OB-C22, funded by MCIN/AEI/10.13039/501100011033/FEDER, UE; the US Department of Energy, grant DE-SC0010107; the European Structural and Investment Funds and the Ministry of Education, Youth and Sports of the Czech Republic via projects LM2023040 CERN-CZ, and FORTE - CZ.02.01.01/00/22_008/0004632. In keeping the research program move forward, the Cyclotron Radio Isotope Center (CYRIC) at Tohoku University was very important to this project. The authors would like to thank the crew at the TRIGA reactor in Ljubljana for help with irradiations. The authors acknowledge the financial support from the Slovenian Research and Innovation Agency (research core funding No. P1-0135 and project No. J1-3032). Copyright 2025 CERN for the benefit of the ATLAS Collaboration. Reproduction of this article or parts of it is allowed as specified in the CC-BY-4.0 license. Funding text 2 This work was supported by the Canada Foundation for Innovation and the Natural Sciences and Engineering Research Council of Canada ; the Spanish R&D grant PID2021-126327OB-C22 , funded by MCIN/AEI/10.13039/501100011033/FEDER, UE ; the US Department of Energy , grant DE-SC0010107 ; the European Structural and Investment Funds and the Ministry of Education, Youth and Sports of the Czech Republic via projects LM2023040 CERN-CZ , and FORTE - CZ.02.01.01/00/22_008/0004632 . In keeping the research program move forward, the Cyclotron Radio Isotope Center (CYRIC) at Tohoku University was very important to this project. The authors would like to thank the crew at the TRIGA reactor in Ljubljana for help with irradiations. The authors acknowledge the financial support from the Slovenian Research and Innovation Agency (research core funding No. P1-0135 and project No. J1-3032)., Peer reviewed