Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 94
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multidisciplinary approach to cylindrical anisotropic metamaterials

  • Carbonell Olivares, Jorge
  • Torrent Martí, Daniel
  • Diaz Rubio, Ana|||0000-0002-0115-1834
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
Anisotropic characteristics of cylindrically corrugated microstructures are analyzed in terms of their acoustic and electromagnetic (EM) behavior paying special attention to their differences and similarities. A simple analytical model has been developed using effective medium theory to understand the anisotropic features of both types of waves in terms of radial and angular components of the wave propagation velocity. The anisotropic constituent parameters have been obtained by measuring the resonances of cylindrical cavities, as well as from numerical simulations. This permits one to characterize propagation of acoustic and EM waves and to compare the fundamental anisotropic features generated by the corrugated effective medium. Anisotropic coefficients match closely in both physics fields but other relevant parameters show significant differences in the behavior of both types of waves. © IOP Publishing Ltd and Deutsche Physikalische Gesellschaft., The authors acknowledge financial support from the Spanish MICINN (TEC 2010-19751 and Consolider CSD2008-00066) and from the US Office of Naval Research (N000140910554). DT also acknowledges support from the program 'Campus de Excelencia Internacional 2010 UPV'.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transformational acoustic metamaterials based on pressure gradients

  • García Meca, Carlos
  • Carloni, S.
  • Barceló, Carlos
  • Jannes, Gil Georges Paul
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
  • Martínez, Alejandro|||0000-0001-5448-0140
We apply a homogenization process to the acoustic velocity potential wave equation. The study of various examples shows that the resulting effective properties are different from those of the homogenized pressure wave equation for the same underlying acoustic parameters. A careful analysis reveals that a given set of inhomogeneous parameters represents an entirely different physical system depending on the considered equation. Our findings unveil a different way of tailoring acoustic properties through gradients of the static pressure. In contrast to standard metafluids based on isobaric composites, this alternative kind of metafluid is suitable for the implementation of transformational devices designed via the velocity potential equation. This includes acoustic systems in a moving background or arising from general space-time transformations. As an example, we design a device able to cloak the acoustic velocity potential., This work was developed under the framework of the ARIADNA Contract No. 4000104572/12/NL/KML of the European Space Agency. C.G.-M., J.S.-D., and A.M. also acknowledge support from Consolider project CSD2008-00066, A.M. from project TEC2011-28664-C02-02, and C.B. and G.J. from the project FIS2011-30145-C03-01. J.S.-D. acknowledges support from the USA Office of Naval Research. All authors contributed equally to this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dual-band double-negative-index fishnet metamaterial at millimeter-waves

  • Navarro-Cia, M.
  • García Meca, Carlos
  • Beruete, M.
  • Sorolla, M.
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] An effective negative refractive index (NRI) is demonstrated and experimentally verified for the first two propagation bands of a fishnet-like metamaterial at millimeter-wave frequencies. The dual-band NRI behavior is achieved by engineering the diffraction order (±1, ±1) associated with the internal mode supported between holey layers to correspond with the second propagation band. In addition to the experimental interferometric technique that accounts for the handedness of the propagation, numerical results are given to predict the dual-band effective NRI and to confirm dual-band negative refraction for a prism composed of the proposed metamaterial. © 2011 Optical Society of America., Authors are grateful to R. Ortuno and F. J. Rodriguez-Fortuo (Valencia Nanophotonics Technology Center) for their helpful comments, to G. Crespo (Universidad Publica de Navarra) for sample fabrication, and to S. Hanham and A. Demetriadou (Imperial College London) for improving the readability of this Letter. Work supported by Spanish Government and European Union (EU) funds under contracts Consolider "Engineering Metamaterials" CSD2008-00066, TEC2008-06871-C02, and Valencian Government (contract PROMETEO-2010-087). M. N.-C. acknowledges financial support from Leverhulme Trust. C. G.-M. acknowledges financial support from grant Formacion del Profesorado Universitario (FPU) of Ministerio de Ciencia e Innovacion (MICINN).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental evidence of super-resolution better than lambda/105 with positive refraction

  • Miñano Domínguez, Juan Carlos
  • González, Juan Carlos
  • Benítez, Pablo
  • Grabovickic, Dejan
  • Carbonell Olivares, Jorge
  • Ahmadpanahi, Seyed Hamed
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
Super-resolution (SR) systems surpassing the Abbe diffraction limit have been theoretically and experimentally demonstrated using a number of different approaches and technologies: using materials with a negative refractive index, utilizing optical super-oscillation, using a resonant metalens, etc. However, recently it has been proved theoretically that in the Maxwell fish-eye lens (MFE), a device made of positive refractive index materials, the same phenomenon takes place. Moreover, using a simpler device equivalent to the MFE called the spherical geodesic waveguide (SGW), an SR of up to lambda/3000 was simulated in COMSOL. Until now, only one piece of experimental evidence of SR with positive refraction has been reported (up to lambda/5) for an MFE prototype working at microwave frequencies. Here, experimental results are presented for an SGW prototype showing an SR of up to lambda/105. The SGW prototype consists of two concentric metallic spheres with an air space in between and two coaxial ports acting as an emitter and a receiver. The prototype has been analyzed in the range 1 GHz to 1.3 GHz., The authors would like to thank the Spanish Ministry MCEI (Consolider program CSD2008-00066, PERIMAGE: TEC2011-24019, TEC2010-16948) for the support given in the preparation of the present work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Elastic analog of graphene: Dirac cones and edge states for flexural waves in thin plates

  • Torrent Martí, Daniel
  • Mayou, Didier
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
An elastic analog of graphene is introduced and analyzed. The system consists of a honeycomb arrangement of spring-mass resonators attached to a thin elastic layer, and the propagation properties of flexural waves along it is studied. The band-structure calculation shows the presence of Dirac points near the K point of the Brillouin zone. Analytical expressions are found for both Dirac frequency and velocity as a function of the resonator s parameters. Finally, the bounded modes of infinitely long ribbons of this honeycomb arrangement are analyzed. The presence of edge states, which are studied using multiple scattering theory, is shown. It is concluded that these structures can be used to control the propagation of flexural waves in thin plates., This work was partially supported by the Spanish Ministerio de Ciencia e Innovacion (MICINN) under Contracts No. TEC2010-19751 and No. CSD2008-66 (the CONSOLIDER program) and by the US Office of Naval Research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Homogenization theory for periodic distributions of elastic cylinders embedded in a viscous fluid

  • Reyes Ayona, Edgar
  • Torrent Martí, Daniel
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
A multiple-scattering theory is applied to study the homogenization of clusters of elastic cylinders distributed in a isotropic lattice and embedded in a viscous fluid. Asymptotic relations are derived and employed to obtain analytical formulas for the effective parameters of homogenized clusters in which the underlying lattice has a low filling fraction. It is concluded that such clusters behave, in the low frequency limit, as an effective elastic medium. Particularly, it is found that the effective dynamical mass density follows the static estimate; i.e., the homogenization procedure does not recover the non-linear behavior obtained for the inviscid case. Moreover, the longitudinal and transversal sound speeds do not show any dependence on fluid viscosity. Numerical simulations performed for clusters made of brass cylinders embedded in glycerin support the reliability of the effective parameters resulting from the homogenization procedure reported here. (C) 2012 Acoustical Society of America. [http://dx.doi.org/10.1121/1.4744933], This work was partially supported by the U.S. Office of Naval Research (Award No. N000140910554) and by the Spanish Ministry of Science and Innovation under Contracts Nos. TEC2010-19751 and CSD2008-66 (CONSOLIDER program). D. T. acknowledges a research grant provided by the program "Campus de Excelencia 2010 UPV."
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electric Levitation Using ε-Near-Zero Metamaterials

  • Rodríguez Fortuño, Francisco José
  • Vakil, Ashkan
  • Engheta, Nader
[EN] The ability to manufacture metamaterials with exotic electromagnetic properties has potential for surprising new applications. Here we report how a specific type of metamaterial-one whose permittivity is near zero-exerts a repulsive force on an electric dipole source, resulting in levitation of the dipole. The phenomenon relies on the expulsion of the time-varying electric field from the metamaterial interior, resembling the perfect diamagnetic expulsion of magnetostatic fields. Leveraging this concept, we study some realistic requirements for the levitation or repulsion of a polarized particle radiating at any frequency, from microwave to optics., This work is supported in part by the US Office of Naval Research (ONR) Multidisciplinary University Research Initiative (MURI) Grant No. N00014-10-1-0942. F. J. R.-F. acknowledges financial support from Grant FPI of GV and the Spanish MICINN under Contracts No. CONSOLIDER EMET CSD2008-00066 and No. TEC2011-28664-C02-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Full three-dimensional isotropic transformation media

  • García Meca, Carlos
  • Ortuño Molinero, Rubén
  • Martí Sendra, Javier
  • Martínez, Alejandro|||0000-0001-5448-0140
We present a method that enables the implementation of full three-dimensional (3D) transformation media with minimized anisotropy. It is based on a special kind of shape-preserving mapping and a subsequent optimization process. For sufficiently smooth transformations, the resulting anisotropy can be neglected, paving the way for practically realizable 3D devices. The method is independent of the considered wave phenomenon and can thus be applied to any field for which a transformational technique exists, such as acoustics or thermodynamics. Full 3D isotropy has an additional important implication for optical transformation media, as it eliminates the need for magnetic materials in many situations. To illustrate the potential of the method, we design 3D counterparts of transformation-based electromagnetic squeezers and bends., The authors acknowledge support from projects Consolider EMET (CSD2008-00066), TEC 2011-28664-C02-02 and GVA ACOMP/2013/013.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sorting linearly polarized photons with a single scatterer

  • Rodríguez Fortuño, Francisco José
  • Puerto Garcia, Daniel
  • Griol Barres, Amadeu
  • Bellieres, Laurent Christophe
  • Martí Sendra, Javier
  • Martínez, Alejandro|||0000-0001-5448-0140
Intuitively, light impinging on a spatially mirror-symmetric object will be scattered equally into mirror-symmetric directions. This intuition can fail at the nanoscale if the polarization of the incoming light is properly tailored, as long as mirror symmetry is broken in the axes perpendicular to both the incident wave vector and the remaining mirror-symmetric direction. The unidirectional excitation of plasmonic modes using circularly polarized light has been recently demonstrated. Here, we generalize this concept and show that linearly polarized photons impinging on a single spatially symmetric scatterer created in a silicon waveguide are guided into a certain direction of the waveguide depending exclusively on their polarization angle and the structure asymmetry. Our work broadens the scope of polarization-induced directionality beyond plasmonics, with applications in polarization (de)multiplexing, unidirectional coupling, directional switching, radiation polarization control, and polarization-encoded quantum information processing in photonic integrated circuits, This work has received financial support from the Spanish government (contracts Consolider EMET CSD2008-00066 and TEC2011-28664-C02-02) and GV (grant ACOMP/2013/013). F. J. R.-F. acknowledges support from grant FPI of GV. D. Puerto acknowledges support from grant Juan de la Cierva (JCI-2010-07479).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimum control of broadband noise by arrays of cylindrical units made of a recycled material

  • García Chocano, Víctor Manuel
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
[EN] We report acoustic barriers that are designed to attenuate efficiently broadband noise. The barriers are structures consisting of only three layers of cylindrical units containing rubber crumb, a sound absorbing material obtained from recycling used tires. An optimization algorithm is developed to obtain the material distribution and dimensions of the building units giving the best attenuation properties for traffic noise, which is here chosen as an example in which the design procedure is applied. A good agreement is found between predictions and measurements for a 3 m height barrier that has been characterized in a transmission room. (C) 2012 Elsevier Ltd. All rights reserved., Work supported by the Spanish MICINN under Contracts TEC2010-19751 and CSD2008-00066 (CONSOLIDER program). We acknowledge F. Simon for data acquisition, D. Torrent for useful discussions and L.-W. Cai for the critical reading of manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Space time transformation acoustics

  • García Meca, Carlos
  • Carloni, S.
  • Barceló, C.
  • Jannes, G.
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
  • Martínez, Alejandro|||0000-0001-5448-0140
A recently proposed analogue transformation method has allowed the extension of transformation acoustics to general space-time transformations. We analyze here in detail the differences between this new analogue transformation acoustics (ATA) method and the standard one (STA). We show explicitly that STA is not suitable for transformations that mix space and time. ATA takes as starting point the acoustic equation for the velocity potential, instead of that for the pressure as in STA. This velocity-potential equation by itself already allows for some transformations mixing space and time, but not all of them. We explicitly obtain the entire set of transformations that leave its form invariant. It is for the rest of transformations that ATA shows its true potential, allowing for building a transformation acoustics method that enables the full range of space-time transformations. We provide an example of an important transformation which cannot be achieved with STA. Using this transformation, we design and simulate an acoustic frequency converter via the ATA approach. Furthermore, in those cases in which one can apply both the STA and ATA approaches, we study the different transformational properties of the corresponding physical quantities., This work was developed under the framework of the ARIADNA contracts 4000104572/11/NL/KML and 4000104572/12/NL/KML of the European Space Agency. C.G.-M., J.S.-D., and A.M. also acknowledge support from Consolider EMET project (CSD2008-00066), A.M. from project TEC2011-28664-C02-02, C.B. and GJ. from the project FIS2008-06078-C03-01, and J.S.-D. from the Office of Naval Research (Grant No. N00014-12-1-0216).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electromagnetic absorption in anisotropic photonic crystal of alumina cylinders

  • Carbonell Olivares, Jorge
  • Arriaga, J.
  • Gumen, L.
  • Krokhin, A.
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
[EN] We present a theoretical and experimental study of the effective permittivity of a photonic crystal (PC) made of parallel dielectric rods in the long-wavelength limit. Using the plane-wave expansion method we derive an analytical expression for the imaginary part of the dielectric tensor. Angular dependence of the dissipative part of permittivity turns out to be more complicated than that for the real part. In particular, it exhibits stronger anisotropy for a PC with rectangular unit cell. Theoretical and numerical results are compared to the experimental measurements of microwave reflection and transmission through a PC fabricated from low-loss alumina rods. A good agreement between the theory and experiment was obtained in the limit where the effective medium approximation is valid. © 2011 Elsevier B.V., This work was supported by the Ministerio de Ciencia e Innovación of Spain under contracts TEC 2007-67239, TEC 2010-19751 and CONSOLIDER CSD2008-00066, by the US Department of Energy through the Grant No. DE-FG02-06ER46312, and by the Office of Naval Research through the Grant No. 000140910554. L.G. acknowledges the support by CONACyT (Mexico) and A.K. acknowledges the support by the Ministerio de Educación of Spain Contract No. SAB2009-00009. Authors thank F. Cervera for technical help.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sound focusing by gradient index sonic lenses

  • Climente Alarcón, Alfonso
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
  • Torrent Martí, Daniel
Gradient index sonic lenses based on two-dimensional sonic crystals are here designed, fabricated, and characterized. The index-gradient is achieved in these type of flat lenses by a gradual modification of the sonic crystal filling fraction along the direction perpendicular to the lens axis. The focusing performance is well described by an analytical model based on ray theory as well as by numerical simulations based on the multiple-scattering theory. (c) 2010 American Institute of Physics, Work partially supported by USA Office of Naval Research (Grant No. N000140910554) and by the Spanish MICIIN under Contract Nos. TEC2007-67239 and CSD2008-66 (CONSOLIDER program).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automated design of bandpass filters based on open complementary split ring resonators (OCSRRs) using aggressive space mapping (ASM) optimization

  • Rodríguez Pérez, Ana María
  • Selga, Jordi
  • Sans, Marc
  • Martin, Ferran
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This paper is focused on the design of bandpass filters based on open complementary split ring resonators (OCSRRs) in microstrip technology. The filters are obtained by coupling the corresponding shunt resonators (OCSRRs) through admittance inverters (quarter wavelength transmission line sections). Different undesirable effects derived from the chosen topology are taken into account and are compensated at the design level. These effects include the reduction in bandwidth (caused by the narrowband functionality of the line sections acting as admittance inverters), and the presence of a spurious band above the filter passband. The proposed technique is based on the well-known aggressive space mapping algorithm, which is a powerful tool for the synthesis and design of microwave components. The design of the OCSRR-based filter is provided in a fully automated way as the main result of this paper. Copyright (c) 2015 John Wiley & Sons, Ltd., This work has been supported by MINECO-Spain (projects TEC2010-17512 METATRANSFER, TEC2013-47037-C5-1-R, CONSOLIDER EMET CSD2008-00066, TEC2013-40600-R, and TEC2013-49221-EXP), Generalitat de Catalunya (project 2014SGR-157), and Institucio Catalana de Recerca i Estudis Avancats (who has awarded Ferran Martin).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Double-negative acoustic metamaterials based on quasi-two-dimensional fluid-like shells

  • Graciá Salgado, Rogelio
  • Torrent Martí, Daniel
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
A structured cylindrical scatterer with low-frequency resonances in both the effective bulk modulus and the dynamical mass density is designed and characterized. The proposed scattering unit is made of a rigid cylinder surrounded by a fluid-like shell embedded in a two-dimensional waveguide of height less than the length of the cylindrical scatterer. It is demonstrated that the acoustic metamaterials based on this building unit have negative acoustic parameters in a broad range of frequencies. It is also shown that double-negative behavior can be tailored by adjusting the dimensions and properties of the materials forming the structured scattering unit., This work was partially supported by the Spanish Ministerio de Ciencia e Innovacion (MICINN) under contracts TEC2010-19751 and CSD2008-66 (the CONSOLIDER program) and by the US Office of Naval Research. The authors acknowledge Victor M Garcia-Chocano for useful discussions and Kimee Moore for proofreading the paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Universal method for the synthesis of arbitrary polarization states radiated by a nanoantennas

  • Rodríguez Fortuño, Francisco José
  • Puerto Garcia, Daniel
  • Griol Barres, Amadeu
  • Bellieres, Laurent Christophe
  • Martí Sendra, Javier
  • Martínez, Alejandro|||0000-0001-5448-0140
Optical nanoantennas efficiently convert confined optical energy into free-space radiation. The polarization of the emitted radiation depends mainly on nanoantenna shape, so it becomes extremely difficult to manipulate it unless the nanostructure is physically altered. Here, a simple way is demonstrated to synthetize the polarization of the radiation emitted by a single nanoantenna so that every point on the Poincare sphere becomes attainable. The nanoantenna consists of a single scatterer created on a dielectric waveguide and fed from its both sides so that the polarization of the emitted optical radiation is controlled by the amplitude and phase of the feeding signals. The nanoantenna is created on a silicon chip using standard top-down nanofabrication tools, but the method is universal and can be applied to other materials, wavelengths and technologies. This work will open the way towards the synthesis and control of arbitrary polarization states in nano-optics., This work has received financial support from Spanish government (contracts Consolider EMET CSD2008-00066 and TEC2011-28664-C02-02). D. Puerto acknowledges support from grant Juan de la Cierva (JCI-2010-07479).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Towards the automatic layout synthesis in resonant-type metamaterial transmission lines

  • Selga, J.
  • Rodriguez Perez, Ana Maria
  • Gil, M.
  • Carbonell Olivares, Jorge
  • Martin, F.
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
The first approach towards the automatic layout generation of resonant-type metamaterial transmission lines by using space mapping optimisation is reported. Specifically, the so-called aggressive space mapping (ASM) technique is applied for synthesising microstrip lines loaded with complementary split ring resonators (CSRRs). From a certain set of elements of the circuit model of the unit cell of such lines (which is typically derived from system specifications), the topology (layout) of the CSRR-loaded microstrip line, providing the same electromagnetic response as the circuit model (within certain error limits), is generated automatically. This synthesis technique is of paramount importance for the design of metamaterial-based (or inspired) circuits implemented by means of electrically small resonators such as CSRRs and SRRs. Although the reported technique is applied here to the synthesis of a negative permittivity structure (CSRR-loaded line), the basics towards the extension of the technique to other artificial transmission lines are clearly established., This work has been supported by MEC (Spain) through the projects TEC2007-68013-C02 METAINNOVA and TEC2007-67630-C03 CABESERES and by MCI (Spain) through the project EMET CSD2008-00066 of the CONSOLIDER Ingenio 2010 Program. The authors especially thank Generalitat de Catalunya for funding CIMITEC and for supporting GEMMA through the project 2009SGR-421. The Ministerio de Education (Spain) has given an FPU grant to J.S. with reference AP2008-04707.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automated synthesis of transmission lines loaded with complementary split ring resonators (CSRRs) and open complementary split ring resonators (OCSRRs) through aggressive space mapping (ASM)

  • Selga, Jordi
  • Rodríguez Pérez, Ana María
  • Orellana, Marco
  • Martín, Ferran
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This paper is focused on the application of space mapping optimization to the automated synthesis of transmission lines loaded with complementary split ring resonators (CSRRs) and open complementary split ring resonators (OCSRRs). These structures are of interest for the implementation of resonant-type metamaterial transmission lines and for the design of planar microwave circuits based on such complementary resonators. The paper presents a method to generate the layouts of CSRR- and OCSRR-loaded microstrip lines from the elements of their equivalent circuit models. Using the so-called aggressive space mapping, a specific implementation that uses quasi-Newton type iteration, we have developed synthesis algorithms that are able to provide the topology of these CSRR and OCSRR-loaded lines in few steps. The most relevant aspect, however, is that this synthesis process is completely automatic, i.e., it does not require any action from the designers, other than initiating the algorithm. Moreover, this technique can be translated to other electrically small planar elements described by lumped element equivalent circuit models., This work has been partially supported by MICIIN-Spain (Projects TEC2010-17512 METATRANSFER, TEC2010-21520-C04-01 AVANSAT, CONSOLIDER EMET CSD2008-00066, and Grant AP2008-04707), Generalitat de Catalunya (Project 2009SGR-421), and MITyC-Spain (Project TSI-020100-2010-169 METASINTESIS). Ferran Martin is in debt to ICREA for supporting his work through an ICREA Academia Award (calls 2008 and 2013).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Acoustic cloack for airborne sound by inverse design

  • García Chocano, Víctor Manuel
  • Sanchis, Lorenzo
  • Díaz Rubio, Ana
  • Martínez Pastor, Juan P.
  • Llopis Pontiveros, Rafael
  • Cervera Moreno, Francisco Salvador
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
[EN] This Letter presents practical realization of a two-dimensional low loss acoustic cloak for airborne sound obtained by inverse design. The cloak consists of 120 aluminum cylinders of 15 mm diameter surrounding the cloaked object¿a cylinder of diameter 22.5 cm. The position of each cylinder in the cloak is optimized using the data from two different techniques: genetic algorithm and simulated annealing. The operation frequency of this cloak is 3061 Hz with the bandwidth of about 100 Hz. Being a multi-step approach to the desired cloaking, the inverse design is also valid, in principle, for non-symmetric cylinders and even for three-dimensional objects. VC 2011 American Institute of Physics, Work supported by ONR under Award N000140910554 and the Spanish MCINN under Contract Nos. TEC2010-19751, TEC2008-06756-C03-03, and CSD2008-00066 (CONSOLIDER Program). L. S. thanks the fellowship provided by CSIC with number JAEDoc-08-00351.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Terahertz metamaterials on flexible polypropylene substrate

  • Ortuño Molinero, Rubén
  • García Meca, Carlos
  • Martínez, Alejandro|||0000-0001-5448-0140
In this work, we present a metamaterial working at terahertz frequencies made over a flexible polypropylene sub-strate. The experimental measurements, in accordance with the numerical calculations, show the metamaterial reliance on the impinging electric field polarization. The structure s symmetry yields purely electrical resonant responses eliminating bianisotropy effects. The widely used bendable polypropylene polymer may promote the insertion of metamaterial-based structures with special electromagnetic response in a number of objects of our daily lives such as textiles, automotive components, and sensing, This work was supported by the Spanish MICINN under contracts CONSOLIDER EMET CSD2008-00066 and TEC2011-28664-C02-02 and by the Universitat Politecnica de Valencia under the program INNOVA 2011.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Noise control by sonic crystal barriers made of recycled materials

  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
  • Cervera Moreno, Francisco Salvador
  • Cabrera García, Suitberto|||0000-0003-1704-8361
  • García Chocano, Víctor Manuel
  • Torrent Martí, Daniel
  • Simon, Francisco
A systematic study of noise barriers based on sonic crystals made of cylinders that use recycled materials like absorbing component is reported here. The barriers consist of only three rows of perforated metal shells filled with rubber crumb. Measurements of reflectance and transmittance by these barriers are reported. Their attenuation properties result from a combination of sound absorption by the rubber crumb and reflection by the periodic distribution of scatterers. It is concluded that the porous cylinders can be used as building blocks whose physical parameters can be optimized in order to design efficient barriers adapted to different noisy environments. © 2011 Acoustical Society of America., This work has been partially supported by the Spanish MICINN under Grant Nos. TEC2007-67239 and CSD2008-66 (CONSOLIDER Program). D.T. acknowledges a research contract provided by the program Campus de Excelencia 2010 UPV. The authors acknowledge F. Payri and A. Broatch for providing the technical facilities that made possible sonic of the measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Compact Dual-Band Terahertz Quarter-Wave Plate Metasurface

  • Torres, Victor
  • Sánchez Losilla, Nuria
  • Etayo, David
  • Ortuño Molinero, Rubén
  • Navarro-Cía, Miguel
  • Beruete, Miguel
  • Martínez, Alejandro|||0000-0001-5448-0140
A dual-band quarter-wave plate based on a modified extraordinary transmission hole array is numerically analyzed and experimentally demonstrated at terahertz frequencies. To control independently orthogonal polarizations, the original square holes are connected with vertical slits and their lateral straight sides are replaced by meander lines. This smart design enables dual-band operation with unprecedented fractional bandwidths in a compact structure. Considering a flattening deviation lower than 40% of the optimum value, a fractional bandwidth of 53.8% and 3.8% is theoretically obtained (16.8% and 2.9% in the experiment) at 1 and 2.2 THz, respectively. At these two frequencies, the structure is 0.13-lambda and 0.29-lambda thick, respectively. Given the compactness of the whole structure and the performance obtained, this quarter-wave plate is presented as a competitive device for the terahertz band., This work was supported by the Spanish Government through the Consolider Engineering Metamaterials under Contract CSD2008-00066 and Contract TEC2011-28664-C02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Radial Photonic Crystal for detection of frequency and position of radiation sources

  • Carbonell Olivares, Jorge
  • Torrent Martí, Daniel
  • Kirleis, M. A.
  • Pique, A.
  • Diaz Rubio, Ana|||0000-0002-0115-1834
  • Cervera Moreno, Francisco Salvador
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
Based on the concepts of artificially microstructured materials, i.e. metamaterials, we present here the first practical realization of a radial wave crystal. This type of device was introduced as a theoretical proposal in the field of acoustics, and can be briefly defined as a structured medium with radial symmetry, where the constitutive parameters are invariant under radial geometrical translations. Our practical demonstration is realized in the electromagnetic microwave spectrum, because of the equivalence between the wave problems in both fields. A device has been designed, fabricated and experimentally characterized. It is able to perform beam shaping of punctual wave sources, and also to sense position and frequency of external radiators. Owing to the flexibility offered by the design concept, other possible applications are discussed., This work was supported in part by the Spanish Ministry of Science and Innovation under Grants TEC 2010-19751 and CSD2008-00066 (Consolider program) and by the U.S. Office of Naval Research under Grant N000140910554.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analogue transformation acoustics and the compression of spacetime

  • García Meca, Carlos
  • Carloni, Sante
  • Barceló, Carlos
  • Jannes, Gil Georges Paul
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
  • Martínez, Alejandro|||0000-0001-5448-0140
A recently developed technique known as analogue transformation acoustics has allowed the extension of the transformational paradigm to general spacetime transformations under which the acoustic equations are not form invariant. In this paper, we review the fundamentals of analogue transformation acoustics and show how this technique can be applied to build a device that increases the density of events within a given spacetime region by simultaneously compressing space and time., This work was developed under the framework of the ARIADNA contract 4000104572/12/NL/KML of the European Space Agency. C.G.-M., J.S.-D., and A.M. also acknowledge support from Consolider project CSD2008-00066, A.M. from project TEC2011-28664-CO2-02, and C.B. and G.J. from the project FIS2011-30145-C03-01. J.S.-D. acknowledges support from the USA Office of Naval Research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental realization of broadband tunable resonators based on anisotropic metafluids

  • Spiousas, Ignacio
  • Torrent Martí, Daniel
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
This letter demonstrates the mechanical tuning of modes confined in two-dimensional acoustic cavities based on anisotropic metafluids. The employed metafluids have been designed with effective parameters such that the radial component of the sound speed tensor keeps constant and the acoustic impedance remains finite along the tuning. It is shown that mode frequencies can be mechanically down shifted to extremely low values. Experiments confirm the model predictions and let us to conclude that this type of resonators can be employed for the miniaturization of standard resonators based on isotropic fluids such as air. © 2011 American Institute of Physics., We acknowledge support from Office of Naval Research (Grant No. N00014-09-1-0554) and from the Spanish Ministerio de Ciencia e Innovacion under projects with Grant Nos. TEC2010-19751 and CSD2008-00066 (CONSOLIDER Program). D.T. acknowledges a fellowship provided by the program Campus de Excelencia Internacional 2010 UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of low-loss metamaterials with negative index in the visible domain

  • García Meca, Carlos
[EN] Over the last decade, negative index media have attracted much attention due to their potential applications, especially the possibility of constructing superlenses. However, achieving high-performance negative-index metamaterials at visible frequencies, where this kind of media could find many applications, still remains a challenge. In this article, we provide a brief overview of the main routes for the implementation of metamaterials with negative index in this band, with a special focus on the so-called fishnet metamaterial. We pay particular attention to a specific fishnet configuration that recently allowed for the experimental demonstration of a low-loss and polarization-insensitive negative-index band in the visible regime., The author would like to thank R. Ortuno for useful discussions. Financial support from project CONSOLIDER EMET CSD2008-00066 is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Avoiding metallic walls: Use of modal superposition in plasmonic waveguides to reduce propagation loss

  • Rodríguez Fortuño, Francisco José
  • Engheta, Nader
[EN] We theoretically explore the possibility of reducing propagation loss in a metal-insulator-metal (MIM) waveguide, using mode combinations to achieve wall-avoiding field distributions along a certain propagation length. We present analytical results for several waveguides showing notable loss reduction, and we discuss the trade-offs between low loss and high confinement present in this technique. © 2012 American Physical Society., F. J. Rodriguez-Fortuno acknowledges financial support from grant FPI of GV and the Spanish MICINN under contracts CONSOLIDER EMET CSD2008-00066 and TEC2011-28664-C02-02. This work is supported in part by the Office of Naval Research (ONR) Multidisciplinary University Research Initiative (MURI) grant No. N00014-10-1-0942.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of split-rings-based artificial transmission lines through a new two-step, fast converging, and robust aggressive space mapping (ASM) algorithm

  • Selga, Jordi
  • Rodríguez Pérez, Ana María
  • Martín, Ferran
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This paper is focused on the synthesis of artificial transmission lines based on complementary split ring resonators (CSRRs). The considered structures are microstrip lines with CSRRs etched in the ground plane and microstrip lines loaded with both CSRRs and series capacitive gaps. An aggressive space mapping (ASM) optimization algorithm, able to automatically generate the layout of these arti ficial lines, has been developed.The tool has been optimized in order to achieve fast convergence and to provide accurate results. The main relevant aspects of the proposed algorithm (based on a n ovel two-step ASM optimization approach) are: 1) the capability to provide the implementable circuit elements of the equivalent circuit model of the considered artificial lines and 2) the ability to converge in a few (unprecedented) iteration steps, due to a new procedure to generate the initial layouts (which are very close to the final ones). First, the software is tested through the synthesis of several CSRR-based microstrip lines, and then some practical application examples of such artificial lines are reported to illustrate the potential of the proposed synthesis tool., This work was supported in part by MICIIN-Spain under Project TEC2010-17512 METATRANSFER, Project TEC2010-21520-C04-01, Project CONSOLIDER EMET CSD2008-00066, and Grant AP2008-04707, Generalitat de Catalunya under Project 2009SGR-421, and MITyC-Spain under Project TSI-020100-2010-169 METASINTESIS.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Directive excitation of guided electromagnetic waves through polarization control

  • Carbonell Olivares, Jorge
  • Rodríguez Fortuño, Francisco José
  • Diaz Rubio, Ana|||0000-0002-0115-1834
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Cervera Moreno, Francisco Salvador
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
Experimental evidence is reported on the control of the directionality of guided electromagnetic microwaves by the polarization of the exciting wave. Experiments are conducted using a two-dimensional waveguide made of two parallel aluminum plates. The upper plate, which has a linear array of holes, is externally illuminated by a polarized wave whose incident wavevector is contained within the mirror-symmetry plane defined by the linear array. Surprisingly, the measurements show that the propagation inside the waveguide is highly asymmetrical, and it is controlled by the polarization of the incoming wave. This extraordinary phenomenon is explained in terms of a simple model involving a set of dipoles that are excited at the hole positions. Our finding provides a powerful method to sort different polarizations of a free-space beam to different propagation directions of guided electromagnetic waves., The authors gratefully acknowledge B. Bernardo and A. Vila at Electromagnetic Radiation Group Universitat Politecnica de Valencia for the generous donation of the circular polarization antenna for the experiments. J.S.-D. thanks D. Torrent for useful discussions. Financial support from the Spanish Ministry of Economy and Competitiveness (Grants No. TEC2010-19751, No. TEC2011-28664-C02, and No. Consolider CSD2008-00066) is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analogue of the quantum hanle effect and polarization conversion in non-hermitian plasmonic metamaterials

  • Ginzburg, Pavel
  • Rodríguez Fortuño, Francisco José
  • Zayats, Anatoly V.
  • Martínez, Alejandro|||0000-0001-5448-0140
The Hanle effect, one of the first manifestations of quantum theory introducing the concept of coherent superposition between pure states, plays a key role in numerous aspects of science varying from applicative spectroscopy to fundamental astrophysical investigations. Optical analogues of quantum effects help to achieve deeper understanding of quantum phenomena and, in turn, to develop cross-disciplinary approaches to realizations of new applications in photonics. Here we show that metallic nanostructures can be designed to exhibit a plasmonic analogue of the quantum Hanle effect and the associated polarization rotation. In the original Hanle effect, time-reversal symmetry is broken by a static magnetic field. We achieve this by introducing dissipative level crossing of localized surface plasmons due to nonuniform losses, designed using a non-Hermitian formulation of quantum mechanics. Such artificial plasmonic "atoms" have been shown to exhibit strong circular birefringence and circular dichroism which depends on the value of loss or gain in the metal-dielectric nanostructure. © 2012 American Chemical Society., This work has been supported in part by EPSRC (UK). P.G. acknowledges Royal Society for a Newton International Fellowship. F.J.R.-F. acknowledges support from grant FPI of GV and the Spanish MICINN under contracts CONSOLIDER EMET CSD2008-00066 and TEC2011-28664-C02-02.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The variational principle in transformation optics engineering and some applications

  • García Meca, Carlos
  • Tung, Michael Ming-Sha|||0000-0002-8760-0927
Transformation optics specializes in the engineering of advanced optical devices, and in combination with differential geometry it allows to control electromagnetic fields with artificial media in an unprecedented manner. In this work, we model transformation optics in an inherently covariant fashion starting with a fundamental Lagrangian function. As an application, we present the construction of a flat reflectionless immersion lens whose superior performance is important to applications in bio- and nano-technology., This work has been supported by the Spanish Ministerio de Ciencia e Innovacion under the grant MTM2009-08587, contract CSD2008-00066, and the FPU programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Highly-sensitive chemical detection in the infrared regime using plasmonic gold nanocrosses

  • Rodríguez Fortuño, Francisco José
  • Martínez Marco, Mª Luz
  • Tomás Navarro, Begoña
  • Ortuño Molinero, Rubén
  • Rodríguez Cantó, Pedro Javier
  • Martí Sendra, Javier
  • Martínez, Alejandro|||0000-0001-5448-0140
In this work, we report the design, fabrication, and characterization of gold nanocrosses for chemosensing purposes. The nanocrosses are designed to exhibit a localized surface plasmon resonance which is very sensitive to refractive index changes in the surrounding medium, resulting in sensitivity values of around 500-700 nm per refractive index unit at wavelengths around 1.4 ¿m. We experimentally demonstrate the functionalization of the gold nanocrosses and the successful sensing of chemical monolayers. © 2011 American Institute of Physics., Financial support by the Spanish MICINN under contracts CONSOLIDER EMET CSD2008-00066 and TEC2008-06871-C02-02 is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modulation of electromagnetic waves by alternating currents through left-handed ferromagnetic microwires

  • García Miquel, Ángel Héctor
  • Carbonell Olivares, Jorge
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
We present experimental results of electromagnetic wave modulation by the application of AC currents along a ferromagnetic microwire at the frequency range where left-handed transmission is observed. It is demonstrated that transmitted microwave signals through a waveguide mount are modulated by the current applied to the wire. From the measurements, we have extracted information about the magnetic susceptibility behavior of the microwires. © 2012 American Institute of Physics., Work partially supported by MICINN (Spain) under contracts with Refs. TEC 2010-19751 and CSD2008-00066 (CONSOLIDER Program).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Squeezing and expanding light without reflections via transformation optics

  • García Meca, Carlos
  • Galán Conejos, José Vicente
  • Ortuño Molinero, Rubén
  • Rodríguez Fortuño, Francisco José
  • Tung, Michael Ming-Sha|||0000-0002-8760-0927
  • Martí Sendra, Javier
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] We study the reflection properties of squeezing devices based on transformation optics. An analytical expression for the angle-dependent reflection coefficient of a generic three-dimensional squeezer is derived. In contrast with previous studies, we find that there exist several conditions that guarantee no reflections so it is possible to build transformation-optics-based reflectionless squeezers. Moreover, it is shown that the design of antireflective coatings for the non-reflectionless case can be reduced to matching the impedance between two dielectrics. We illustrate the potential of these devices by proposing two applications in which a reflectionless squeezer is the key element: an ultra-short perfect coupler for high-index nanophotonic waveguides and a completely flat reflectionless hyperlens. We also apply our theory to the coupling of two metallic waveguides with different cross-section. Finally, we show how the studied devices can be implemented with non-magnetic isotropic materials by using a quasi-conformal mapping technique. © 2011 Optical Society of America., Financial support by the Spanish MICINN under contract CONSOLIDER EMET (CSD2008-00066) and PROMETEO-2010-087 R&D Excellency Program (NANOMET) is gratefully acknowledged. C. G.-M., R. O. and F.J. R.-F. acknowledge financial support from grants FPU of MICINN, FPI of U.P.V. and FPI of Generalitat Valenciana, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Three-dimensional axisymmetric cloak based on the cancellation of acoustic scattering from a sphere

  • Sanchis Martínez, Lorenzo
  • García Chocano, Víctor Manuel
  • Llopis Pontiveros, Rafael
  • Martínez Pastor, J.
  • Climente Alarcón, Alfonso
  • Cervera Moreno, Francisco Salvador
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
This Letter presents the design, fabrication, and experimental characterization of a directional threedimensional acoustic cloak for airborne sound. The cloak consists of 60 concentric acoustically rigid tori surrounding the cloaked object, a sphere of radius 4 cm. The major radii and positions of the tori along the symmetry axis are determined using the condition of complete cancellation of the acoustic field scattered from the sphere. They are obtained through an optimization technique that combines genetic algorithm and simulated annealing. The scattering cross section of the sphere with the cloak, which is the magnitude that is minimized, is calculated using the method of fundamental solutions. The low-loss fabricated cloak shows a reduction of the 90% of the sphere scattering cross section at the frequency of 8.55 kHz., This work is partially supported by the Spanish Ministerio de Economia y Competitividad under Contracts No. TEC2010-19751, No. TEC2011-29120-C05-01, and No. CSD2008-00066 (CONSOLIDER Program), and by the U.S. Office of Naval Research. The authors acknowledge the "Centro de Tecnologias Fisicas'' at the UPV for technical help during data acquisition. We also acknowledge the computing facilities provided by the Universidad de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Beyond Anderson localization in 1D: Anomalous localizacion of microwaves in random waveguides

  • Fernandez Marin, Antonio Alejandro
  • Mendez Bermudez, J.A.
  • Carbonell Olivares, Jorge
  • Gopar, V. A.
  • Cervera Moreno, Francisco Salvador
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
Experimental evidence demonstrating that anomalous localization of waves can be induced in a controllable manner is reported. A microwave waveguide with dielectric slabs randomly placed is used to confirm the presence of anomalous localization. If the random spacing between slabs follows a distribution with a power-law tail (Lévy-type distribution), unconventional properties in the microwave-transmission fluctuations take place revealing the presence of anomalous localization. We study both theoretically and experimentally the complete distribution of the transmission through random waveguides characterized by α ¼ 1=2 (“Lévy waveguides”) and α ¼ 3=4, α being the exponent of the power-law tail of the Lévy-type distribution. As we show, the transmission distributions are determined by only two parameters, both of them experimentally accessible. Effects of anomalous localization on the transmission are compared with those from the standard Anderson localization., J.C., F.C., J.S.-D., and V.A.G. acknowledge financial support from MINECO (Spain) under the Projects No. FIS2012-35719-C02-02, No. TEC2010-19751, and No. CSD2008-00066 (CONSOLIDER Program). A.A.F.-M. and J.A.M.-B. thank Fondo Institucional PIFCA through Grant No. BUAP-CA-169 for partial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of equivalent anisotropy arising from dual isotropic layers of acoustic media

  • Cai, Liang-Wu
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
The equivalence between a single mass-anisotropic layer and two isotropic layers is analyzed by studying two systems: one consists of an anisotropic layer sandwiched between two arbitrarily chosen isotropic media; and the other consists of two isotropic layers, of a total thickness equal to that of the anisotropic layer, sandwiched between the same pair of isotropic media. The equivalence is established by matching the transmission and reflection coefficients of the two systems for an arbitrarily chosen incident angle. The first-order equivalence leads to exactly the same set of relations as often quoted in the literature. However, it was concluded that a full second-order equivalence is not possible unless the incident is normal to the surface, or the materials are isotropic. One of the requirements for the second-order equivalence is that the two isotropic layers must have their impedances matched. Together with the first order equivalence requirements, this gives a complete set of conditions for determining all the materials properties of the two isotropic layers. On the other hand, the unattainable full second-order equivalence can be alleviated by a proper placement of layers: by placing the heavier layer adjacent to the medium of greater acoustic impedance. Numerical examples show that this remedy in fact is more important than following the partial requirement for the second order equivalence when the equivalent isotropic layers are used in acoustic cloaking applications. (C) 2012 Acoustical Society of America. [http://dx.doi.org/10.1121/1.4744927], The authors would like to acknowledge the support from the US Office of Naval Research under the Grants No. N00014-09-1-0546 (LWC) and N00014-09-1-0554 (JSD), and from the Spanish Ministerio de Ciencia e Innovacion under the projects No. TEC2010-19751 and CSD2008-00066 (CONSOLIDER Program). LWC also acknowledges a sabbatical fellowship provided by Spanish Ministry of Education with Reference No. SAB2010-0058.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiple scattering formulation of two-dimensional acoustic and electromagnetic metamaterials

  • Torrent Martí, Daniel
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
A multiple scattering formulation of two-dimensional (2D) acoustic metamaterials is presented. This approach is comprehensive and can lead to frequency-dependent effective parameters (scalar bulk modulus and tensorial mass density), as it is possible to have not only positive or negative ellipsoidal refractive index, but also positive or negative hyperbolic refractive index. The correction due to multiple scattering interactions is included in the theory and it is demonstrated that its contribution is important only for lattices with high filling fractions. Since the surface fields on the scatterers are mainly responsible for the anomalous behavior of the resulting effective medium, complex scatterers can be used to engineer the frequency response. Anisotropic effects are also discussed within this formulation and some numerical examples are reported. A homogenization theory is also extended to electromagnetic wave propagation in 2D lattices of dielectric structures, where Mie resonances are found to be responsible for the metamaterial behavior. © IOP Publishing Ltd and Deutsche Physikalische Gesellschaft., This work was partially supported by the US Office of Naval Research under grant number N000140910554 and the Spanish Ministry of Science and Innovation under contract numbers TEC2010-19751 and CSD2008-66 (the CONSOLIDER program). Daniel Torrent also acknowledges support from the contract provided by the program 'Campus de Excelencia Internacional' 2010 UPV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of slow-wave structures based on capacitive-loaded lines through aggressive space mapping (ASM)

  • Orellana, M.
  • Selga, J.
  • Sans, M.
  • Rodriguez Perez, Ana Maria
  • Martín Antolín, Juan Fernando
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This article is focused on the automated synthesis of slow-wave structures based on microstrip lines loaded with patch capacitors. Thanks to the presence of the shunt capacitors, the effective capacitance of the line is enhanced, and the phase velocity of the structure can be made significantly smaller than the one of the unloaded line. The target is to achieve the layout of the slow-wave structure able to provide the required slow-wave ratio, characteristic (Bloch) impedance and electrical length (i.e., the usual specifications in the design of slow-wave transmission lines). To this end, a two-step synthesis method, based on the aggressive space mapping (ASM) algorithm, is proposed for the first time. Through the first ASM algorithm, the circuit schematic providing the target specifications is determined. Then, the second ASM optimizer is used to generate the layout of the structure. To illustrate the potential of the proposed synthesis method, three application examples are successfully reported. The two-step ASM algorithm is able to provide the layout of the considered structures from the required specifications, without the need of an external aid in the process., This work has been supported by MINECO-Spain (projects TEC2010-17512 METATRANSFER, TEC2010-21520-C04-01, TEC2013-47037-C5-1-R, CONSOLIDER EMET CSD2008-00066, TEC2013-40600-R and TEC2013-49221-EXP), Generalitat de Catalunya (project 2014SGR-157), Institucio Catalana de Recerca i Estudis Avancats (who has awarded Ferran Martin) and FEDER Funds. Marco Orellana acknowledges the support of the Universidad de Costa Rica, MICITT and CONICIT to study at the Univesitat Autonoma de Barcelona.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Engineering antenna radiation patterns via quasi-conformal mappings

  • García Meca, Carlos
  • Leonhardt, U.
  • Martínez, Alejandro|||0000-0001-5448-0140
We use a combination of conformal and quasi-conformal mappings to engineer isotropic electromagnetic devices that modify the omnidirectional radiation pattern of a point source. For TE waves, the designed devices are also non-magnetic. The flexibility offered by the proposed method is much higher than that achieved with conformal mappings. As a result, it is shown that complex radiation patterns can be achieved, which can combine high directivity in a desired number of arbitrary directions and isotropic radiation in other specified angular ranges. In addition, this technique enables us to control the power radiated in each direction to a certain extent. The obtained results are valid for any part of the spectrum. The potential of this method is illustrated with some examples. Finally, we study the frequency dependence of the considered devices and propose a practical dielectric implementation. (C) 2011 Optical Society of America, Financial support by the Spanish Ministerio de Ciencia e Innovacion (contract CSD2008-00066 and FPU grant) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design of planar wideband bandpass filters from specifications using a two-step aggressive space mapping (ASM) optimization algorithm

  • Sans, Marc
  • Selga, Jordi
  • Rodríguez Pérez, Ana María
  • Bonache, Jordi
  • Martín, Ferran
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
This paper is focused on the automated and unattended optimization of a type of planar wideband bandpass filters by means of aggressive space mapping (ASM). The considered filters are microstrip filters implemented through a combination of shunt connected stepped impedance resonators (SIRs) and grounded stubs coupled through admittance inverters. The most relevant and novel aspect of this paper is the fact that the filter layout is automatically generated from filter specifications, i.e., central frequency, fractional bandwidth, in-band ripple and order, without the need of any external aid to the design process. To achieve this layout generation, filter optimization has been divided into two independent ASM processes. The first one generates the filter schematic (circuit element values) providing the required specifications. This first iterative process is necessary since, due to the narrow band operation of the admittance inverters, the target specifications are achieved by compensating the effects of such narrow band operation. The purpose of the second ASM algorithm is to automatically generate the layout from the filter schematic resulting from the first ASM process. To validate the new two-step ASM optimization tool, two sets of filter specifications (inputs of the developed tool), are considered. The generated filter layouts exhibit frequency responses that satisfy the specifications, and are in excellent agreement with the responses of the schematics., This work was supported by MINECO-Spain (projects TEC2010-17512 METATRANSFER, TEC2010-21520-C04-01 and TEC2013-47037-C5-1-R, CONSOLIDER EMET CSD2008-00066, TEC2013-40600-R and TEC2013-49221-EXP), Generalitat de Catalunya (project 2014SGR-157), and Institucio Catalana de Recerca i Estudis Avancats (who has awarded F. Martin). This paper was presented in part at the IEEE MTT-S International Microwave Symposium, Tampa Bay, FL, USA, June 1-6, 2014.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reduced acoustic cloaks based on temperature gradients

  • García Chocano, Víctor Manuel
  • Torrent Martí, Daniel
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
This letter presents the design of a reduced acoustic cloak that uses a temperature gradient in order to obtain sound speeds larger than in air. The cloak consists of a circular acoustic crystal made of ten concentric layers of rigid cylinders whose surfaces are heated or cooled in order to get the temperature gradient needed for cloaking behavior. The total pressure field produced by the scattering of sound waves impinging this complex structure is computed and it is shown how acoustic waves are bent in a way similar to that predicted for perfect cloaking devices. © 2012 American Institute of Physics., Work partially supported by the Spanish MICINN under Grant Nos. TEC2010-19751 and CSD2008-66 (CONSOLIDER program) and by the U.S. Office of Naval Research. J.S.-D. acknowledges useful discussions with L.-W. Cai.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Demonstration of near infrared gas sensing using gold nanodisks on functionalized silicon

  • Rodríguez Cantó, Pedro Javier
  • Martínez Marco, Mª Luz
  • Rodríguez Fortuño, Francisco José
  • Tomás Navarro, Begoña
  • Ortuño Molinero, Rubén
  • Peransi Llopis, Sergio Manuel
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] In this work, we demonstrate experimentally the use of an array of gold nanodisks on functionalized silicon for chemosensing purposes. The metallic nanostructures are designed to display a very strong plasmonic resonance in the infrared regime, which results in highly sensitive sensing. Unlike usual experiments which are based on the functionalization of the metal surface, we functionalized here the silicon substrate. This silicon surface was modified chemically by buildup of an organosilane self-assembled monolayer (SAM) containing isocyanate as functional group. These groups allow for an easy surface regeneration by simple heating, thanks to the thermally reversible interaction isocyanate-analyte, which allows the cyclic use of the sensor. The technique showed a high sensitivity to surface binding events in gas and allowed the surface regeneration by heating of the sensor at 150°C. A relative wavelength shift ¿¿max/¿0 = 0.027 was obtained when the saturation level was reached. © 2011 Optical Society of America., Financial support by the Spanish MICINN under contracts CONSOLIDER EMET (CSD2008-00066) and TEC2008-06871-C02-02 and European Commission FP7 under the FET-Open project TAILPHOX 233833 is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Acoustic analogue of graphene: observation of Dirac cones in acoustic surface waves

  • Torrent Martí, Daniel
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
We demonstrate the presence of Dirac cones in the dispersion relation of acoustic waves propagating on the surface of a plate of methyl methacrylate containing a honeycomb lattice of cylindrical boreholes. This structure represents the acoustic analogue of graphene, the cylindrical cavities playing the role of carbon atoms while acoustic surface waves are the equivalent of electronic waves in graphene. Analytical expressions for the Dirac frequency and Dirac velocity in acoustics are given as a function of the radius and depth of boreholes. These parameters have been experimentally determined for a constructed structure and the data are in fairly good agreement with the predicted values. © 2012 American Physical Society., Work supported by the Spanish Ministry of Science and Innovation (MICINN) under Contracts No. TEC2010-19751 and No. CSD2008-66 (CONSOLIDER program). Daniel Torrent acknowledges support from the program "Campus de Excelencia Internacional 2010 UPV." Both authors thank Didier Mayou for useful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Extraordinary Transmission-inspired Dual-band THz Quarter-wave Plate

  • Torres, Víctor
  • Sánchez, Nuria
  • Etayo, David
  • Ortuño, Rubén
  • Navarro-Cía, Miguel
  • Beruete, Miguel
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] We propose a very compact metasurface that works as a quarter-wave plate at two different frequencies, 1 THz and 2.2 THz. The fractional bandwidth of the first band is remarkably 32.2%, beyond the state-of-the-art, This work was supported in part by the Spanish Government under Contract Consolider Engineering Metamaterials CSD2008-00066 and contract TEC2011-28664-C02. M. Navarro-Cía acknowledges his IC Junior Research Fellowship
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Magnetic hot spots in closely spaced thick gold nanorings

  • Lorente Crespo, María
  • Wang, Li
  • Ortuño Molinero, Rubén
  • García Meca, Carlos
  • Ekinci, Yasin
  • Martínez, Alejandro|||0000-0001-5448-0140
Ligh-matter interaction at optical frequencies is mostly mediated by the electric component of the electromagnetic field, with the magnetic component usually being considered negligible. Recently, it has been shown that properly engineered metallic nanostructures can provide a magnetic response at optical frequencies originated from real or virtual flows of electric current in the structure. In this work, we demonstrate a magnetic plasmonic mode which emerges in closely spaced thick gold nanorings. The plasmonic resonance obtains a magnetic dipole character by sufficiently increasing the height of the nanorings. Numerical simulations show that a virtual current loop appears at resonance for sufficiently thick nanorings, resulting in a strong concentration of the magnetic field in the gap region (magnetic hot spot). We find that there is an optimum thickness that provides the maximum magnetic intensity enhancement (over 200-fold enhancement) and give an explanation of this observation. This strong magnetic resonance, observed both experimentally and theoretically, can be used to build new metamaterials and resonant loop nanoantennas at optical frequencies., This work has been supported by Spanish Government and European Union (EU) funds under contracts CSD2008-00066 and TEC2011-28664-C02-02 and Universitat Politecnica de Valencia (program INNOVA 2011). The authors extend special thanks to Mr. J. Ross Aitken for his contribution to this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-Loss multilayered metamaterial exhibiting a negative index of refraction at visible wavelengths

  • García Meca, Carlos
  • Dickson, Wayne
  • Zayats, Anatoly V.
  • Hurtado Montañés, Juan|||0000-0002-4870-7641
  • Martí Sendra, Javier
  • Martínez, Alejandro|||0000-0001-5448-0140
We experimentally demonstrate a low-loss multilayered metamaterial exhibiting a double-negative refractive index in the visible spectral range. To this end, we exploit a second-order magnetic resonance of the so-called fishnet structure. The low-loss nature of the employed magnetic resonance, together with the effect of the interacting adjacent layers, results in a figure of merit as high as 3.34. A wide spectral range of negative index is achieved, covering the wavelength region between 620 and 806 nm with only two different designs. © 2011 American Physical Society., Financial support by the Spanish MICINN (Contracts No. CSD2008-00066 and No. TEC2008-06871-C02) and by the Valencian government (Contract No. PROMETEO-2010-087) is acknowledged. C.G.-M. acknowledges financial support from Grant FPU of MICINN. W.D. and A.Z. acknowledge financial support from EPSRC (U.K.).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Quasi-two-dimensional acoustic metamaterial with negative bulk modulus

  • García Chocano, Víctor Manuel
  • Graciá Salgado, Rogelio
  • Torrent Martí, Daniel
  • Cervera Moreno, Francisco Salvador
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
We present the experimental realization and characterization of an acoustic metamaterial with negative bulk modulus. The metamaterial consists of a two-dimensional array of cylindrical cavities, and the bulk modulus is controlled by their radius size and length. Experiments are performed in a two-dimensional waveguide where a slab of seven layers is used to extract the parameters of the metamaterial. A complete characterization of the constructed structure is reported, including the dispersion relation of the acoustic bands and the skin depth effect, which both have been measured, and the data are well supported by semianalytical models and by finite-element simulations. © 2012 American Physical Society., This work was supported by the Spanish MICINN under Contracts No. TEC2010-19751 and No. CSD2008-0066 (CONSOLIDER program), and by the USA Office of Naval Research. We acknowledge the technical help by A. Diaz-Rubio and A. Climente. J.S.-D. acknowledges useful discussions with A. Broatch and A. Krokhin. D.T. acknowledges the postdoctoral grant provided by the UPV under the program Campus de excelencia internacional.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Resolving Light Handedness with an on-Chip Silicon Microdisk

  • Rodríguez Fortuño, Francisco José
  • Barber-Sanz, Isaac
  • Puerto Garcia, Daniel
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
The efficient manipulation of circularly polarized light with the proper handedness is key in many photonic applications. Chiral structures are capable of distinguishing photon handedness, but while photons with the right polarization are captured, those of opposite handedness are rejected. In this work, we demonstrate a planar photonic nanostructure with no chirality consisting of a silicon microdisk coupled to two waveguides. The device distinguishes the handedness of an incoming circularly polarized light beam by driving photons with opposite spins toward different waveguides. Experimental results are in close agreement with numerical results, which predict extinction ratios over 18 dB in a 20 nm bandwidth. Owing to reciprocity, the device can also emit right or left circular polarization depending on the chosen feeding waveguide. Although implemented here on a CMOS-compatible platform working at telecom wavelengths, the fundamental approach is general and can be extended to any frequency regime and technological platform., This work has received financial support from the Spanish government (contracts Consolider EMET CSD2008-00066 and TEC2011-28664-C02-02). D.P. acknowledges support from grant Juan de la Cierva (JCI-2010-07479).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High order standing-wave plasmon resonances in silver u-shaped nanowires

  • Rodríguez Fortuño, Francisco José
  • Ortuño Molinero, Rubén
  • García Meca, Carlos
  • Martí Sendra, Javier
  • Martínez, Alejandro|||0000-0001-5448-0140
Optical measurements of the transmission spectra through nanofabricated planar arrays of silver u-shaped nanowires on a silicon substrate resonating at infrared frequencies are performed. Good agreement with the numerically simulated surface plasmon standing wave resonances supported by the structures is found. Such resonances exhibit field enhancement and are able to provide magnetic and electric responses when used as the unit cell of a metamaterial. The magnetic excitation of the resonators using oblique incidence is shown to be drastically reduced by the existence of a high index substrate such as silicon. © 2012 American Institute of Physics., We acknowledge financial support from the Spanish MICINN under Contracts CONSOLIDER EMET CSD2008-00066 and TEC2011-28664-C02-02. F. J. Rodriguez-Fortuno acknowledges financial support from Grant FPI of GV.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analogue Transformations in Physics and their Application to Acoustics

  • García Meca, Carlos
  • Carloni, S.
  • Barcelo, C.
  • Jannes, G.
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
  • Martínez, Alejandro|||0000-0001-5448-0140
Transformation optics has shaped up a revolutionary electromagnetic design paradigm, enabling scientists to build astonishing devices such as invisibility cloaks. Unfortunately, the application of transformation techniques to other branches of physics is often constrained by the structure of the field equations. We develop here a complete transformation method using the idea of analogue spacetimes. The method is general and could be considered as a new paradigm for controlling waves in different branches of physics, from acoustics in quantum fluids to graphene electronics. As an application, we derive an analogue transformation acoustics formalism that naturally allows the use of transformations mixing space and time or involving moving fluids, both of which were impossible with the standard approach. To demonstrate the power of our method, we give explicit designs of a dynamic compressor, a spacetime cloak for acoustic waves and a carpet cloak for a moving aircraft., This work was developed under the framework of the ARIADNA contract 4000104572/11/NL/KML of the European Space Agency. A. M. and J. S.-D. also acknowledge support from Consolider EMET project (CSD2008-00066), A. M. from project TEC2011-28664-C02-02, J.S.-D. from US Office of Naval Research, and C. B. and G. J. from the project FIS2008-06078-C03-01. We thank Reme Miralles for her help with Fig. 2.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Mid-infrared Plasmonic Inductors

  • Torres, Víctor
  • Ortuño, Rubén
  • Rodríguez-Ulibarri, Pablo
  • Navarro-Cía, Miguel
  • Beruete, Miguel
  • Sorolla, Mario
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Expanding ideas from microwaves, we demonstrate experimentally a terahertz inductor by using meander-lines in a canonical extraordinary transmission (ET) hole array leading to a strong resonance¿s redshift and an unprecedented enlargement of the operation bandwidth.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiple extraordinary optical transmission peaks from evanescent coupling in perforated metal plates surrounded by dielectrics

  • Ortuño Molinero, Rubén
  • García Meca, Carlos
  • Rodríguez Fortuño, Francisco José
  • Martí Sendra, Javier
  • Martínez, Alejandro|||0000-0001-5448-0140
We study numerically and theoretically the optical transmission of nanostructured gold films embedded in dielectric claddings. We show how multiple transmission peaks appear as the claddings thickness increases. These transmission peaks come not only from surface plasmon polariton excitations but also from the excitation of Fabry-Perot modes sustained at the claddings, coupled through the metal, as long as a periodic pattern is milled in the metal film. We propose that this structure could be used as an ultracompact all-optical switch by surrounding the metal film with Kerr nonlinear dielectric layers. (C) 2010 Optical Society of America, Financial support by the Spanish MICINN was provided under contracts PET2007-0505, TEC2008-06871-C02-02, and CSD2008-00066. Consolider EMET is gratefully acknowledged. R. Ortuño, C. García-Meca, and F. J. Rodríguez-Fortuño also acknowledge grant programs FPI of UPV, FPU of MICINN, and FPI of GVA, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-Q whispering gallery modes in anisotropic metamterials shells

  • Diaz Rubio, Ana|||0000-0002-0115-1834
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
  • Carbonell Olivares, Jorge
  • Torrent Martí, Daniel
Anisotropic and inhomogeneous metamaterial shells are studied in order to exploit all their resonant mode richness. These multilayer structures are based on a cylindrical distribution of radially dependent constitutive parameters including an inner void cavity. Shell, cavity, and whispering gallery modes are characterized, and special attention is paid to the latter ones. The whispering gallery modes are created at the boundary layers of the shell with the background. Energy localization is produced with highly radiative characteristics when the localization takes place at the external layer. These low-Q resonant states have frequencies that are independent of the shell thickness. However, their quality factors can be controlled by the number of layers forming the shell, which allows confining electromagnetic waves at the interface layers (internal or external), and make them suitable for the harvesting of electromagnetic energy., The authors acknowledge the financial support of Spanish Ministry MINECO (Grants No. TEC 2010-19751 and No. Consolider CSD2008-00066), and the US Office of Naval Research (USA). J. Sanchez-Dehesa acknowledges useful discussions with Federico Sabina and Matthew Guild.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Negative mass density and ρ-near-zero quasi-two-dimensional metamaterials: Design and applications

  • Graciá Salgado, Rogelio
  • García Chocano, Víctor Manuel
  • Torrent Martí, Daniel
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
We report the design and the characterization of artificial structures made of periodical distributions of structured cylindrical scatterers embedded in a two-dimensional (2D) waveguide. For certain values of their geometrical parameters they show simultaneously negative effective bulk modulus and negative effective mass density. Here our analysis is focused on the frequencies where they behave like materials with negative density or density near zero (DNZ). The scattering units consist of a rigid cylindrical core surrounded by an anisotropic shell divided in angular sectors. The units are embedded in a 2D waveguide whose height is smaller than the length of the cylinders, which makes the structure quasi-2D. We have obtained the dispersion relation of the surface acoustic waves excited at frequencies with negative effective density. Also, we report phenomena associated with their DNZ behavior, such as tunneling through narrow channels, control of the radiation field, perfect transmission through sharp corners, and power splitting. Preliminary experiments performed on samples with millimeter-scale dimensions demonstrated their single-negative behavior, with the main drawback being the strong losses measured at the frequencies where the negative behavior is observed., Work partially supported by the Spanish Ministry of Economy and Competitivity with References No. TEC 2010-19751 and No. CSD2008-00066 (Consolider Program). The authors also acknowledge support from the U.S. Office of Naval Research (Grant No. N000142161). The authors thanks Francisco Cervera for his technical help in the fabrication of samples and to Matthew Guild for the critical reading of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

From rejection to transmission with stacked arrays of split ring resonators

  • Carbonell Olivares, Jorge
[EN] We report on free space transmission experiments carried out on stacked split ring resonator (SRRs) arrays operating at microwave frequencies. We start from the case of a single frequency selective surface which exhibits a rejection at the SRR resonance frequency. By stacking SRR arrays in the propagation direction, we then show experimentally the possibility to induce a transmission band just below this resonance frequency. Full wave analysis shows the role played by the longitudinal and transverse coupling effects in the electromagnetic properties of such bulk metamaterials, with the appearance of a transmission band resulting from an artificial magnetic activity., The authors acknowledge the assistance of Mr. Antonio Vila in the fabrication of the prototypes. J. C. acknowledges the financial support of MICINN, Spain (Contract numbers: TEC 2007-67239 and Consolider CSD2008-00066) and also USTL (France).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Near-Field Interference for the Unidirectional Excitation of Electromagnetic Guided Modes

  • Rodríguez Fortuño, Francisco José
  • Marino, Giuseppe
  • Ginzburg, Pavel
  • O’Connor, Daniel
  • Wurtz, Gregory A.
  • Zayats, Anatoly V.
  • Martínez, Alejandro|||0000-0001-5448-0140
Wave interference is a fundamental manifestation of the superposition principle with numerous applications. Although in conventional optics, interference occurs between waves undergoing different phase advances during propagation, we show that the vectorial structure of the near field of an emitter is essential for controlling its radiation as it interferes with itself on interaction with a mediating object. We demonstrate that the near-field interference of a circularly polarized dipole results in the unidirectional excitation of guided electromagnetic modes in the near field, with no preferred far-field radiation direction. By mimicking the dipole with a single illuminated slit in a gold film, we measured unidirectional surface-plasmon excitation in a spatially symmetric structure. The surface wave direction is switchable with the polarization., This work has been supported in part by the Engineering and Physical Sciences Research Council (grant EP/H000917/2). F.J.R.-F. acknowledges support from grant FPI of Generalitat Valenciana. A. M. acknowledges financial support from the Spanish government (contracts Consolider EMET CSD2008-00066 and TEC2011-28664-C02-02). P. G. acknowledges the Royal Society for a Newton International Fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Wireless energy transfer between anisotropic metamaterials shells

  • Diaz Rubio, Ana|||0000-0002-0115-1834
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
  • Carbonell Olivares, Jorge
The behavior of strongly coupled Radial Photonic Crystals shells is investigated as a potential alternative to transfer electromagnetic energy wirelessly. These sub-wavelength resonant microstructures, which are based on anisotropic metamaterials, can produce efficient coupling phenomena due to their high quality factor. A configuration of selected constitutive parameters (permittivity and permeability) is analyzed in terms of its resonant characteristics. The coupling to loss ratio between two coupled resonators is calculated as a function of distance, the maximum (in excess of 300) is obtained when the shells are separated by three times their radius. Under practical conditions an 83% of maximum power transfer has been also estimated., This work was supported by the Spanish Ministry of Economy and Competitiveness under Grants TEC 2010-19751 and Consolider CSD2008-00066. The authors acknowledge Daniel Torrent for useful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mid-infrared plasmonic inductors: Enhancing inductance with meandering lines

  • Torres, Victor
  • Ortuño Molinero, Rubén
  • Rodriguez-Ulibarri, Pablo
  • Navarro-Cia, Miguel
  • Beruete, Miguel
  • Sorolla, Mario
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
We present a mid-infrared inductor that when applied to an extraordinary transmission hole array produces a strong redshift of the resonant peak accompanied by an unprecedented enlargement of the operation bandwidth. The importance of the result is twofold: from a fundamental viewpoint, the direct applicability of equivalent circuit concepts borrowed from microwaves is demonstrated, in frequencies as high as 17 THz upholding unification of plasmonics and microwave concepts and allowing for a simplification of structure design and analysis; in practical terms, a broadband funnelling of infrared radiation with fractional bandwidth and efficiency as high as 97% and 48%, respectively, is achieved through an area less than one hundredth the squared wavelength, which leads to an impressive accessible strong field localization that may be of great interest in sensing applications., In memoriam Prof. Mario Sorolla. Effort sponsored by Spanish Government under contracts Consolider "Engineering Metamaterials" CSD2008-00066, TEC2011-28664-C01 and TEC2011-28664-C02. V. T. acknowledges funding from Universidad Publica de Navarra. P.R.-U. is sponsored by the Government of Navarra under funding program "Formacion de tecnologos" 055/01/11. M. N.-C. is supported by the Imperial College Junior Research Fellowship. M. B. acknowledges funding by the Spanish Government under the research contract program Ramon y Cajal RYC-2011-08221.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exciting surface plasmons with transformation media

  • García Meca, Carlos
  • Ortuño Molinero, Rubén
  • Martí Sendra, Javier
  • Martínez, Alejandro|||0000-0001-5448-0140
We present a way of exciting surface plasmon polaritons along non-patterned metallic surfaces by means of a flat squeezing slab designed with transformation optics. The slab changes the dispersion relation of incident light, enabling evanescent coupling to propagating surface plasmons. Unlike prism couplers, the proposed device does not introduce reflections at its input interface. Moreover, its compact geometry is suitable for integration. A feasible dielectric implementation of the coupler is suggested. Finally, we show that the angular response of the device can be engineered by using a non-uniform compression factor. As an example, we design a coupler with a half-power angular bandwidth 2. 5 times higher than that of a conventional dielectric coupler. © 2012 Springer Science+Business Media, LLC., Financial support by Spanish Ministerio de Ciencia e Innovacion (contracts CSD2008-00066 and TEC2008-06871-C02, and FPU grant) is gratefully acknowledged.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Theoretical modeling and experimental verification of the scattering from a ferromagnetic microwire

  • Liberal Olleta, Íñigo
  • Ederra Urzainqui, Íñigo
  • Gómez Polo, Cristina
  • Labrador Otamendi, Alberto
  • Pérez de Landazábal Berganzo, José Ignacio
  • Gonzalo García, Ramón
This contribution presents a theoretical modelling of the scattering of ferromagnetic microwires in free-space and inside a rectangular waveguide, providing both an analytical solution and a physical interpretation of the problem. Special attention is devoted to the impact of the microwire radius and its magnetic properties. Theoretical results have been experimentally verified measuring the reflection, absorption and transmission coefficients of a ferromagnetic microwire inside a rectangular waveguide., This work was supported by the Spanish Ministry of Science and Innovation under Project TEC2009-11995 and Project CSD2008- 00066.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Analogue transformations in physics and their application to acoustics

  • García-Meca, C.
  • Carloni, S.
  • Barceló, Carlos
  • Jannes, G.
  • Sánchez-Dehesa, J.
  • Martínez, A.
Transformation optics has shaped up a revolutionary electromagnetic design paradigm, enabling scientists to build astonishing devices such as invisibility cloaks. Unfortunately, the application of transformation techniques to other branches of physics is often constrained by the structure of the field equations. We develop here a complete transformation method using the idea of analogue spacetimes. The method is general and could be considered as a new paradigm for controlling waves in different branches of physics, from acoustics in quantum fluids to graphene electronics. As an application, we derive an >analogue transformation acoustics> formalism that naturally allows the use of transformations mixing space and time or involving moving fluids, both of which were impossible with the standard approach. To demonstrate the power of our method, we give explicit designs of a dynamic compressor, a spacetime cloak for acoustic waves and a carpet cloak for a moving aircraft., This work was developed under the framework of the ARIADNA contract 4000104572/11/NL/KML of the European Space Agency. A. M. and J. S.-D. also acknowledge support from Consolider EMET project (CSD2008-00066), A. M. from project TEC2011-28664-C02-02, J.S.-D. from US Office of Naval Research, and C. B. and G. J. from the project FIS2008-06078-C03-01., Peer reviewed, Peer Reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Application of RF-MEMS-Based Split Ring Resonators (SRRs) to the Implementation of Reconfigurable Stopband Filters, a Review

  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
In this review paper, several strategies for the implementation of reconfigurable split ring resonators (SRRs) based on RF-MEMS switches are presented. Essentially three types of RF-MEMS combined with split rings are considered: (i) bridge-type RF-MEMS on top of complementary split ring resonators CSRRs; (ii) cantilever-type RF-MEMS on top of SRRs; and (iii) cantilever-type RF-MEMS integrated with SRRs (or RF-MEMS SRRs). Advantages and limitations of these different configurations from the point of view of their potential applications for reconfigurable stopband filter design are discussed, and several prototype devices are presented.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrically small resonators for planar metamaterial, microwave circuit and antenna design, a comparative analysis

  • Durán-Sindreu, Miguel|||0000-0002-1459-9857
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
Planar metamaterials and many microwave circuits and antennas are designed by means of resonators with dimensions much smaller than the wavelength at their resonance frequency. There are many types of such electrically small resonators, and the main purpose of this paper is to compare them as building blocks for the implementation of microwave components. Aspects such as resonator size, bandwidth, their circuit models when they are coupled to transmission lines (as is usually required), as well as key applications, will be considered.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Synthesis of split rings based artificial transmission lines through a new two-step, fast converging, and robust aggressive space mapping (ASM) algorithm

  • Selga Ruiz, Jordi|||0000-0002-1660-500X
  • Rodríguez, Ana
  • Boria, Vicente E.
  • Martín, Ferran|||0000-0002-1494-9167
This paper is focused on the synthesis of artificial transmission lines based on complementary split ring resonators (CSRRs). The considered structures are microstrip lines with CSRRs etched in the ground plane and microstrip lines loaded with both CSRRs and series capacitive gaps. An aggressive space mapping (ASM) optimization algorithm, able to automatically generate the layout of these artificial lines, has been developed. The tool has been optimized in order to achieve fast convergence and to provide accurate results. The main relevant aspects of the proposed algorithm (based on a novel two-step ASM optimization approach) are: 1) the capability to provide the implementable circuit elements of the equivalent circuit model of the considered artificial lines and 2) the ability to converge in a few (unprecedented) iteration steps, due to a new procedure to generate the initial layouts (which are very close to the final ones). First, the software is tested through the synthesis of several CSRR-based microstrip lines, and then some practical application examples of such artificial lines are reported to illustrate the potential of the proposed synthesis tool.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Design of planar wideband bandpass filters from specifications using a two-step aggressive space mapping (ASM) optimization algorithm

  • Sans, Marc
  • Selga Ruiz, Jordi|||0000-0002-1660-500X
  • Rodríguez, Ana
  • Bonache, Jordi|||0000-0002-7225-5737
  • Boria, Vicente E.
  • Martín, Ferran|||0000-0002-1494-9167
2This paper is focused on the automated and unattended optimization of a type of planar wideband bandpass filters by means of aggressive space mapping (ASM). The considered filters are microstrip filters implemented through a combination of shunt connected stepped impedance resonators (SIRs) and grounded stubs coupled through admittance inverters. The most relevant and novel aspect of this paper is the fact that the filter layout is automatically generated from filter specifications, i.e., central frequency, fractional bandwidth, in-band ripple and order, without the need of any external aid to the design process. To achieve this layout generation, filter optimization has been divided into two independent ASM processes. The first one generates the filter schematic (circuit element values) providing the required specifications. This first iterative process is necessary since, due to the narrow band operation of the admittance inverters, the target specifications are achieved by compensating the effects of such narrow band operation. The purpose of the second ASM algorithm is to automatically generate the layout from the filter schematic resulting from the first ASM process. To validate the new two-step ASM optimization tool, two sets of filter specifications (inputs of the developed tool), are considered. The generated filter layouts exhibit frequency responses that satisfy the specifications, and are in excellent agreement with the responses of the schematics.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Automated synthesis of transmission lines loaded with complementary split ring resonators (CSRRs) and open complementary split ring resonators (OCSRRs) through aggressive space mapping (ASM)

  • Selga Ruiz, Jordi|||0000-0002-1660-500X
  • Rodríguez, Ana
  • Orellana Gutiérrez, Marco Antonio
  • Boria, Vicente E.
  • Martín, Ferran|||0000-0002-1494-9167
This paper is focused on the application of space mapping optimization to the automated synthesis of transmission lines loaded with complementary split ring resonators (CSRRs) and open complementary split ring resonators (OCSRRs). These structures are of interest for the implementation of resonant-type metamaterial transmission lines and for the design of planar microwave circuits based on such complementary resonators. The paper presents a method to generate the layouts of CSRR- and OCSRR-loaded microstrip lines from the elements of their equivalent circuit models. Using the so-called aggressive space mapping, a specific implementation that uses quasi-Newton type iteration, we have developed synthesis algorithms that are able to provide the topology of these CSRR- and OCSRR-loaded lines in few steps. The most relevant aspect, however, is that this synthesis process is completely automatic, i.e., it does not require any action from the designers, other than initiating the algorithm. Moreover, this technique can be translated to other electrically small planar elements described by lumped element equivalent circuit models.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Dual and broadband power dividers at microwave frequencies based on composite right/left handed (CRLH) lattice networks

  • Vélez, Paris|||0000-0001-6502-5987
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
This paper proposes a dual-band power divider operating at GHz frequencies and implemented by means of impedance transformers (also called inverters) based on lattice networks and transmission line sections. The dual-band functionality of the proposed device is achieved thanks to the composite right/left handed (CRLH) behavior of the impedance transformers, able to provide -90° and +90° phase shift at the first and second design frequencies, respectively, of the divider. By using such combination of transmission line sections and lattice networks, the characteristic impedance of the impedance transformers is roughly constant over wide bandwidths, with the results of broad operating bands. To demonstrate the possibilities of the approach, a prototype device is designed, fabricated and characterized.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Effects of inter-resonator coupling in split ring resonator loaded metamaterial transmission lines

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Fernández-Prieto, Armando|||0000-0002-1158-6049
  • Mesa Ledesma, Francisco
  • Medina, Francisco|||0000-0002-9947-506X
  • Martín, Ferran|||0000-0002-1494-9167
This paper investigates the effects of inter-resonator coupling in metamaterial transmission lines loaded with split ring resonators (SRRs). The study is performed from Bloch mode theory applied to the multiport equivalent circuit model of the unit cell of such artificial lines. From this analysis, it follows that the stopband bandwidth, inherent to SRR-loaded lines, is enhanced as inter-resonator coupling strengthens, and this enhancement is attributed to the presence of complex modes. The theoretical results are corroborated through calculation of the dispersion relation using a full-wave eigenmode solver, and also by measuring the frequency response of SRR-loaded lines with different inter-resonator distance and, hence, coupling.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Selective mode suppression in microstrip differential lines by means of electric-LC (ELC) and magnetic-LC (MLC) resonators

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Durán-Sindreu, Miguel|||0000-0002-1459-9857
  • Martín, Ferran|||0000-0002-1494-9167
In this paper, it is demonstrated that the so-called electric-LC (ELC) resonators, and their dual counterparts, the magnetic-LC (MLC) resonators, are useful for the selective suppression of either the differential or the common mode in microstrip differential lines. The key point to mode suppression is the alignment of the resonator with the electric (differential mode) or magnetic (common mode) wall of the line. It is shown that by simply rotating the resonators 90∘ we can selectively choose the suppressed mode in the vicinity of the resonator's fundamental resonance frequency. The theory is validated through full-wave electromagnetic simulation, the lumped element equivalent circuit models of the proposed structures and experimental data.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Compact dual-band differential power splitter with common-mode suppression and filtering capability based on differential-mode composite right/left-handed transmission-line metamaterials

  • Vélez, Paris|||0000-0001-6502-5987
  • Durán-Sindreu, Miguel|||0000-0002-1459-9857
  • Fernández-Prieto, Armando|||0000-0002-1158-6049
  • Bonache, Jordi|||0000-0002-7225-5737
  • Medina, Francisco|||0000-0002-9947-506X
  • Martín, Ferran|||0000-0002-1494-9167
This letter presents a compact differential-mode (balanced) power splitter with filtering capability and dual-band functionality. This multifunctional device is based on differential-mode composite right/left-handed (DM-CRLH) transmission lines specifically designed to achieve the dual-band behavior and to suppress the common-mode noise over a broad frequency band. The DM-CRLH lines are implemented by means of pairs of CRLH lines with series connected interdigital capacitors and strip inductors in the series branches and mirrored step impedance resonators (SIRs) in the shunt branches. For the differential mode, the SIRs are described by parallel resonant tanks, and the resulting equivalent circuit model is the canonical circuit of a CRLH line, which can be used for designing the dual-band balanced splitter/filter. However, the SIRs are opened under common-mode operation, introducing transmission zeros for that mode. By tailoring the position of these transmission zeros, the common mode can be effectively rejected over a frequency band that covers the splitter operating frequencies. The fabricated dual-band balanced power splitter exhibits a measured matching level better than -11 dB, and measured insertion losses (power splitting) lower than 4.1 dB at the design frequencies (f₁=1.8 GHz and f₂=2.4 GHz). The common-mode suppression at f₁ and f₂ is better than 30 dB.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Two-dimensional alignment and displacement sensor based on movable broadside-coupled split ring resonators

  • Karami-Horestani, Ali|||0000-0002-7747-2554
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Shaterian, Zahra
  • Abbott, Derek|||0000-0002-0945-2674
  • Fumeaux, Cristophe
  • Martín, Ferran|||0000-0002-1494-9167
This paper proposes a two-dimensional alignment and displacement sensor based on movable broadside-coupled split ring resonators (BC-SRRs). As a basis for this sensor, a one-dimensional displacement sensor based on a microstrip line loaded with BC-SRRs is presented firstly. It is shown that compared to previously published displacement sensors, based on SRR-loaded coplanar waveguides, the proposed one-dimensional sensor benefits from a much wider dynamic range. Secondly, it is shown that with modifications in the geometry of the BC-SRRs, the proposed one-dimensional sensor can be modified and extended by adding a second element to create a high-dynamic range two-dimensional displacement sensor. Since the proposed sensors operate based on a split in the resonance frequency, rather than the resonance depth, they benefit from a high immunity to environmental noise. Furthermore, since the sensors' principle of operation is based on the deviation from symmetry, they are more robust to ambient conditions such as changes in the temperature, and thus they can be used as alignment sensors as well. A prototype of the proposed two-dimensional sensor is fabricated and the concept and simulation results are validated through experiment.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Common-mode suppressed differential bandpass filter based on open complementary split ring resonators fabricated in microstrip technology without ground plane etching

  • Vélez, Paris|||0000-0001-6502-5987
  • Durán-Sindreu, Miguel|||0000-0002-1459-9857
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
A differential (or balanced) bandpass filter based on open complementary split ring resonators (OCSRRs) coupled through admittance inverters is presented in this article. Pairs of OCSRRs are symmet- rically placed in a mirror configuration between the strips of the differential line and are modeled by means of two series connected parallel resonators. For the differential (odd) mode, there is a virtual ground at the connecting plane between the OCSRR pairs, and the structure is roughly described by the canonical model of a bandpass filter, consisting of a cascade of shunt resonators coupled through admittance inverters. It is demonstrated that, through a proper design of the OCSRR stages, the common mode noise in the vicinity of the differential filter pass band can be efficiently suppressed. Due to the differential mode operation of the filter, it is not necessary to incorporate metallic vias to ground the OCSRRs. Moreover, as compared to other differential filters based on OCSRRs, defected ground structures are not present in the proposed filters. To illustrate the potential of the approach, two balanced bandpass filters are designed, fabricated, and characterized.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Angular displacement and velocity sensors based on electric-LC (ELC) loaded microstrip lines

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Martín, Ferran|||0000-0002-1494-9167
Planar microwave angular displacement and angular velocity sensors implemented in microstrip technology are proposed. The transducer element is a circularly shaped divider/combiner, whereas the sensing element is an electricLC resonator, attached to the rotating object and magnetically coupled to the circular (active) region of the transducer. The angular variables are measured by inspection of the transmission characteristics, which are modulated by the magnetic coupling between the resonator and the divider/combiner. The degree of coupling is hence sensitive to the angular position of the resonator. As compared with coplanar waveguide angular displacement and velocity sensors, the proposed microstrip sensors do not require air bridges, and the ground plane provides backside isolation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

S-shaped complementary split ring resonators and their application to compact differential bandpass filters with common-mode suppression

  • Karami-Horestani, Ali|||0000-0002-7747-2554
  • Durán-Sindreu, Miguel|||0000-0002-1459-9857
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Fumeaux, Cristophe
  • Martín, Ferran|||0000-0002-1494-9167
This letter presents an S-shaped complementary split ring resonator (S-CSRR) for application in compact differential filters. The working principle of the proposed S-CSRR is explained and a circuit model is developed and validated through electromagnetic simulations. It is shown that an S-CSRR-loaded differential microstrip line with series gaps can be used in the design of compact differential bandpass filters (BPFs) with common-mode suppression. The filter design procedure is explained and the theoretical concept is validated through fabrication and measurement of a compact (0.09 λg 0.25 λg) third-order differential BPF with common-mode suppression.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mechanically reconfigurable microstrip lines loaded with stepped impedance resonators and potential applications

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Martín, Ferran|||0000-0002-1494-9167
This paper is focused on exploring the possibilities and potential applications of microstrip transmission lines loaded with stepped impedance resonators (SIRs) etched on top of the signal strip, in a separated substrate. It is shown that if the symmetry plane of the line (a magnetic wall) is perfectly aligned with the electric wall of the SIR at the fundamental resonance, the line is transparent. However, if symmetry is somehow ruptured, a notch in the transmission coefficient appears. The notch frequency and depth can thus be mechanically controlled, and this property can be of interest for the implementation of sensors and barcodes, as it is discussed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Synthesis of slow-wave structures based on capacitive-loaded lines through aggressive space mapping (ASM)

  • Orellana Gutiérrez, Marco Antonio
  • Selga Ruiz, Jordi|||0000-0002-1660-500X
  • Sans, Marc
  • Rodríguez, Ana
  • Boria, Vicente E.
  • Martín, Ferran|||0000-0002-1494-9167
This article is focused on the automated synthesis of slow-wave structures based on microstrip lines loaded with patch capacitors. Thanks to the presence of the shunt capacitors, the effective capacitance of the line is enhanced, and the phase velocity of the structure can be made significantly smaller than the one of the unloaded line. The target is to achieve the layout of the slow-wave structure able to provide the required slow-wave ratio, characteristic (Bloch) impedance and electrical length (i.e., the usual specifications in the design of slow-wave transmission lines). To this end, a two-step synthesis method, based on the aggressive space mapping (ASM) algorithm, is proposed for the first time. Through the first ASM algorithm, the circuit schematic providing the target specifications is determined. Then, the second ASM optimizer is used to generate the layout of the structure. To illustrate the potential of the proposed synthesis method, three application examples are successfully reported. The two-step ASM algorithm is able to provide the layout of the considered structures from the required specifications, without the need of an external aid in the process.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Recent advances in the modeling of transmission lines loaded with split ring resonators (SRRs)

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Martín, Ferran|||0000-0002-1494-9167
  • Su, Lijuan|||0000-0002-4753-9340
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
This paper reviews the recent advances in the modeling of transmission lines loaded with split ring resonators (SRRs). It is well known that these artificial lines can exhibit a negative effective permeability in a narrow band above the SRR fundamental resonance, providing stopband functionality. By introducing shunt inductive elements to the line, the stopband can be switched to a pass band with left-handed (LH) wave propagation. For the design of microwave circuits based on these artificial lines, accurate circuit models are necessary. The former circuit model of SRR-loaded lines was presented more than one decade ago and is valid under restrictive conditions. This paper presents the progress achieved in the modeling of these artificial lines during the last years. The analysis, restricted to coplanar waveguide (CPW) transmission lines loaded only with SRRs (negative permeability transmission lines), includes the effects of SRR orientation, the coupling between adjacent resonators, and the coupling between the two SRRs constituting the unit cell. The proposed circuit models are validated through electromagnetic simulation and experimental data. It is also pointed out that the analysis can be easily extended to negative permittivity transmission lines based on complementary split ring resonators (CSRRs).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

On the radiation properties of split ring resonators (SRRs) at the second resonance

  • Zuffanelli, Simone
  • Zamora, Gerard|||0000-0001-6609-8643
  • Aguilà Moliner, Pau|||0000-0002-8397-0832
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
The radiation properties of split-ring resonators (SRRs) at their second resonance frequency are studied for the first time in this work. In particular, the electric and magnetic dipole moments of the edge-coupled SRR are calculated analytically under the assumption of strong coupling between the internal and external rings. Based on these results, the radiation resistance and the radiation efficiency are obtained theoretically. Electromagnetic simulations of the structure reveal that there is very good agreement with the theoretical predictions, pointing out the validity of the proposed analysis. As a proof of concept, an SRR antenna prototype is designed and fabricated. Experimental data are in good agreement with the theoretical and simulated results, and demonstrate the validity of the SRR working at its second resonance frequency as a radiating element.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Analysis of transmission lines loaded with pairs of coupled resonant elements and application to sensors

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Su, Lijuan|||0000-0002-4753-9340
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Martín, Ferran|||0000-0002-1494-9167
This paper is focused on the analysis of transmission lines loaded with pairs of magnetically coupled resonators. We have considered two different structures: (i) a microstrip line loaded with pairs of stepped impedance resonators (SIRs), and (ii) a coplanar waveguide (CPW) transmission line loaded with pairs of split ring resonators (SRRs). In both cases, the line exhibits a single resonance frequency (transmission zero) if the resonators are identical (symmetric structure with regard to the line axis), and this resonance is different to the one of the line loaded with a single resonator due to inter-resonator coupling. If the structures are asymmetric, inter-resonator coupling enhances the distance between the two split resonance frequencies that arise. In spite that the considered lines and loading resonators are very different and are described by different lumped element equivalent circuit models, the phenomenology associated to the effects of coupling is exactly the same, and the resonance frequencies are given by identical expressions. The reported lumped element circuit models of both structures are validated by comparing the circuit simulations with extracted parameters with both electromagnetic simulations and experimental data. These structures can be useful for the implementation of microwave sensors based on symmetry properties.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Compact coplanar waveguide bandpass filter based on coupled S-shaped split ring resonators

  • Karami-Horestani, Ali|||0000-0002-7747-2554
  • Durán-Sindreu, Miguel|||0000-0002-1459-9857
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Fumeaux, Cristophe
  • Martín, Ferran|||0000-0002-1494-9167
This letter is focused on the application of coupled single-layer S-shaped split ring resonators (S-SRRs) to the design of highly compact bandpass filters in coplanar waveguide (CPW) technology. S-SRRs have been previously demonstrated as miniaturized resonators, particularly suited for applications in conjunction with coplanar line geometries. However, size reduction of CPW filters based on impedance inverters and S-SRRs is limited by the inverters. Therefore, this letter proposes an alternative geometry of CPW bandpass filters employing S-SRRs in a configuration based on the theory of coupled resonators. A highly compact third-order bandpass filter is designed using this principle, and the proposed approach is validated through experiment, demonstrating competitive filter performance achieved in an extremely small area.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ultra-compact (80 mm2) differential-mode ultra-wideband (UWB) bandpass filters with common-mode noise suppression

  • Vélez, Paris|||0000-0001-6502-5987
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Fernández-Prieto, Armando|||0000-0002-1158-6049
  • Bonache, Jordi|||0000-0002-7225-5737
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Martel, Jesús
  • Medina, Francisco|||0000-0002-9947-506X
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents a novel approach for the implementation of balanced ultra-wideband (UWB) bandpass filters with common-mode noise suppression. To a first-order approximation, the differential-mode filter response is described by the canonical circuit model of a bandpass filter, i.e., a cascade of series-connected resonators alternating with shunt-connected parallel resonant tanks. Thus, the series branches of the balanced filter are implemented by means of inductive strips and patch capacitors, whereas the shunt sections are realized through mirrored stepped-impedance resonators (SIRs) and low-impedance (i.e., capacitive) short transmission-line sections. For the differential mode, the symmetry plane is a virtual ground, the wide strip sections of the SIRs are effectively grounded, and the SIRs behave as grounded inductors parallel connected to capacitors. However, for the common mode, where the symmetry plane is an open (magnetic wall), the SIRs act as shunt-connected series resonators, thus providing transmission zeros at their resonance frequencies. By properly tailoring the location of these transmission zeros, rejection of the common mode over the differential filter passband can be achieved. To illustrate the potential of the approach, an order-5 balanced bandpass filter covering the regulated band for UWB communications (3.1-10.6 GHz) is designed and fabricated. The filter exhibits common-mode rejection above 10 dB over the whole differential filter passband, with differential-mode insertion losses lower than 1.9 dB and return losses better than 10 dB. Since the proposed design approach is based on planar semi-lumped components, filter size is as small as 10.5 mm X 7.6 mm.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Microwave sensors based on symmetry properties of resonator-loaded transmission lines

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Martín, Ferran|||0000-0002-1494-9167
This review paper is focused on the design of microwave sensors using symmetry properties of transmission lines loaded with symmetric resonators. The operating principle of these sensors is presented and then several prototype devices are reported, including linear and angular displacement sensors and rotation speed sensors. The main advantage of the proposed sensors is the robustness against changing environmental conditions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Modeling metamaterial transmission lines loaded with pairs of coupled split-ring resonators

  • Su, Lijuan|||0000-0002-4753-9340
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Martín, Ferran|||0000-0002-1494-9167
A lumped-element equivalent circuit model of the unit cell of metamaterial transmission lines loaded with pairs of coupled split-ring resonators (SRRs) is presented. It is assumed that the dominant coupling mechanism between the SRRs forming the pair is magnetic, and that the distance between SRRs of adjacent cells is high enough to neglect such additional inter-resonator coupling. SRRs are oriented with their symmetry plane orthogonal to the line axis. Under these conditions, the line-to-SRR coupling is also magnetic, the electric coupling being negligible. The presented model accounts for the rupture of symmetry that can be caused, for instance, by asymmetric dielectric loading of the SRRs. Thus, the analysis is carried out on a general model where the SRRs of the pair have different inductance and capacitance. Then, different cases are studied, in particular a line with identical SRRs, and a line with different SRRs, but with the same resonance frequency. It is shown that coupling between SRRs tends to far or split the resonance frequencies of the loaded lines (transmission zeros), except for the symmetric case, where only one resonance (different to the one of uncoupled SRRs) appears. The model is validated by comparing circuit simulations using extracted parameters with electromagnetic simulations and experimental data.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Differential microstrip lines with common-mode suppression based on electromagnetic band-gaps (EBGs)

  • Vélez, Paris|||0000-0001-6502-5987
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
A technique for the suppression of the common mode in differential (balanced) microstrip lines, based on electromagnetic band-gaps (EBGs), is presented in this letter. It is demonstrated that by periodically modulating the common-mode characteristic impedance of the line and simultaneously forcing the differential-mode impedance to be uniform (and equal to the reference impedance of the differential ports), the common mode can be efficiently suppressed over a certain frequency band, while the line is transparent for the differential-mode. The main advantage of EBGs, as compared to other approaches for common-mode suppression in differential microstrip lines, is the fact that the ground plane is kept unaltered. Moreover, the design of the differential line is straightforward since the required level of common-mode suppression and bandwidth are given by simple approximate analytical expressions. As a design example, we report a four-stage common-mode suppressed differential line with 68% fractional bandwidth for the common-mode stopband centered at 2.4 GHz, and maximum common-mode rejection ratio (CMRR) of 19 dB at that frequency. Furthermore, we have designed and fabricated a six-stage double-tuned common-mode suppressed differential line in order to enhance the stopband bandwidth for the common mode around 2.4 GHz.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Recent advances in multiband printed antennas based on metamaterial loading

  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Zamora, Gerard|||0000-0001-6609-8643
  • Zuffanelli, Simone
  • Herraiz-Martínez, Francisco Javier|||0000-0001-5774-659X
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
It is shown that printed antennas loaded with metamaterial resonators can be designed to exhibit multiband functionality. Two different antenna types and metamaterial loading are considered: (i) printed dipoles or monopoles loaded with open complementary split ring resonators (OCSRRs) and (ii) meander line or folded dipole antennas loaded with split ring resonators (SRRs) or spiral resonators (SRs). In the first case, multiband operation is achieved by series connecting one or more OCSRRs within the dipole/monopole. Such resonators force opens at their positions, and by locating them at a quarter wavelength (at the required operating frequencies) from the feeding point, it is possible to achieve multiple radiation bands. In the second case, dual-band functionality is achieved through the perturbation of the antenna characteristics caused by the presence of the metamaterial resonators. This latter strategy is specially suited to achieve conjugate matching between the antenna and the chip in radiofrequency identification (RFID) tags at two of the regulated UHF-RFID bands.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Broadband microstrip bandpass filter based on open complementary split ring resonators

  • Vélez, Paris|||0000-0001-6502-5987
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Durán-Sindreu, Miguel|||0000-0002-1459-9857
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
Broadband bandpass filters based on open complementary split ring resonators (OCSRRs) coupled through admittance inverters, and implemented in microstrip technology, are reported. As compared to other broadband filters based on open split ring resonators (OSRRs), ground plane etching is not necessary in the proposed filters. The selectivity of the filters at the upper transition band is improved thanks to the presence of a controllable transmission zero. To demonstrate the potential of this approach, two illustrative prototype devices have been designed and fabricated.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Dual-band impedance-matching networks based on split-ring resonators for applications in RF identification (RFID)

  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Zamora, Gerard|||0000-0001-6609-8643
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
This paper is focused on the design of dual-band impedance-matching networks of interest in RF identification (RFID) systems. By cascading an impedance-matching network between the chip and antenna, the performance of the RFID tags can be improved. The main aim of this study is to demonstrate the possibility of designing such networks by means of split-ring resonators coupled to microstrip transmission lines. These resonators are especially useful in this design since their equivalent circuit substantially simplifies the parameter calculation of the matching network. Dual-band conjugate matching at two different frequencies, f1=867 MHz and f2=915 MHz, corresponding to the assigned bands for UHF RFID in Europe and the U.S., respectively, is demonstrated. The main difficulty for the synthesis of these dual-band matching networks relies on the proximity of f1 and f2 . Although the chip impedance cannot be considered a design parameter, the network design can be alleviated by allowing certain flexibility in the antenna stage. The fabricated prototype, a dual-band impedance-matching network based on split-ring resonators and loaded with a slot antenna, was characterized by measuring its reflection coefficient. The results reveal that conjugate matching at the above-cited frequencies for the chip impedance under consideration is achieved.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Dual-band UHF-RFID tags based on meander line antennas loaded with spiral resonators

  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Zamora, Gerard|||0000-0001-6609-8643
  • Herraiz-Martínez, Francisco Javier|||0000-0001-5774-659X
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
The purpose of this letter is to implement dual-band tags for ultrahigh-frequency (UHF) radio frequency identification (RFID) applications operative in Europe and the US. Since the regulated bands of UHF-RFID in Europe (867 MHz) and the US (915 MHz) are close, broadband tags might be also considered. However, it is demonstrated in this letter that the performance of dual-band tags designed to operate at the frequency bands of interest is superior to that of broadband (monoband) tags. A meander-line antenna (MLA) has been considered for tag implementation. The dual-band functionality is achieved through a perturbation method consisting of coupling an electrically small resonator [a two-turn spiral resonator (2-SR)] to the antenna. The analysis, design, and fabrication of a dual-band UHF-RFID tag has been carried out. The measured performance of the fabricated prototype is in good agreement with theory. Measured read ranges of 6 and 8 m at the European and US frequency bands, respectively, have been obtained.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Multiband printed monopole antennas loaded with Open Complementary Aplit Ring Resonators (OCSRRs) for PANs and WLANs

  • Herraiz-Martínez, Francisco Javier|||0000-0001-5774-659X
  • Zamora, Gerard|||0000-0001-6609-8643
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
Multiband printed monopole antennas loaded with open complementary split-ring resonators (OCSRRs) are presented. The OCSRRs, modeled as parallel LC resonant tanks, act as high-impedance elements at their resonance frequencies, and different effective λ/4 sections can be achieved in the monopole by placing them at proper locations. Thus, the first working frequency is related to the length of the monopole, while the additional bands are controlled by the resonance frequencies of the OCSRRs. Moreover, the proposed antennas present monopolar radiation characteristics at all the operation bands. Two prototypes are designed, manufactured and measured: 1) a single-loaded OCSRR dual-band printed monopole antenna covering the Bluetooth and IEEE 802.11a/b/g/n bands (2.40-2.48 and 5.15-5.80 GHz, respectively); and 2) a triband prototype based on the same design, but with an additional OCSRR designed to also cover the IEEE 802.11y frequency band (3.65-3.70 GHz). Both antennas are printed on a single-layer of a low-cost substrate, resulting in very compact designs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Printed Magnetoinductive-Wave (MIW) delay lines for chipless RFID Applications

  • Herraiz-Martínez, Francisco Javier|||0000-0001-5774-659X
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Zamora, Gerard|||0000-0001-6609-8643
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
A novel fully passive and electromagnetic chipless radiofrequency identification (RFID) system is proposed. The system is based on printed tags implemented with magnetoinductive-wave (MIW) delay lines. Such lines are composed of a periodic array of coupled square split ring resonators (SSRRs) and propagate slow waves. The tag is codified by introducing reflectors (which provide the identification signature) between the elements of the array. When the tags are interrogated with a pulse in time domain, they produce replicas at the positions where the reflectors are placed. Thanks to the slow group velocity of the MIW delay line, the replicas of the original pulse are not overlapped in time domain and can be demodulated, thus providing the identification code of the tag. The design considerations to implement these chipless tags are studied in the present work. Moreover, a complete set of codified MIW lines for a two-bit system is designed, manufactured and measured. The reported experimental results validate the proposed approach.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Fundamental-mode Leaky-Wave Antenna (LWA) using slotline and Split-Ring-Resonator (SRR)-based metamaterials

  • Zamora, Gerard|||0000-0001-6609-8643
  • Zuffanelli, Simone
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Herraiz-Martínez, Francisco Javier|||0000-0001-5774-659X
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
A new composite right/left-handed (CRLH) slotline leaky-wave antenna (LWA) is proposed. The antenna, implemented by loading a slotline with split-ring resonators (SRRs), is designed to exhibit a balanced dispersion relation, with a continuous transition between the left-handed and the right-handed bands at 2.5 GHz. Since the periodicity of the structure is much less than a wavelength, the proposed LWA belongs to the family of quasi-uniform LWAs, and it radiates from the fundamental mode (contrary to periodic LWAs). Measured and simulated radiation patterns, gain, and scanning angle are reported for a 17-cell LWA. The experimental results demonstrate the potential of the LWA to continuously radiate from backward (- 50°) to forward (+60°) scanning angles, with maximum gains of 7.1 and 11.3 dB in the left- and right-handed bands, respectively, and specular radiation patterns.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Design and synthesis methodology for UHF-RFID tags based on the T-match network

  • Zamora, Gerard|||0000-0001-6609-8643
  • Zuffanelli, Simone
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
A new systematic methodology for the design of T-match based UHF-RFID tags is proposed. The great majority of commercial UHF-RFID tags are based on dipole antennas using a modification of a T-match network. The literature contains examples of models that describe the T-match, but they are not sufficiently accurate to synthesize the tag geometry. Using the proposed methodology, a global band UHF-RFID tag based on a folded dipole antenna and matched to the RFID integrated circuit by means of a T-match network is designed and fabricated. Very good agreement between the measured and simulated read range is achieved within the entire UHF-RFID band, which reveals that the proposed method is amenable for accurate analysis and synthesis of T-match based UHF-RFID tags.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

An approach for the design of passive UHF-RFID tags mounted on optical discs

  • Zuffanelli, Simone
  • Zamora, Gerard|||0000-0001-6609-8643
  • Paredes Marco, Ferran|||0000-0002-7252-1169
  • Martín, Ferran|||0000-0002-1494-9167
  • Bonache, Jordi|||0000-0002-7225-5737
In this paper, an innovative design strategy for UHF-RFID tags mounted on optical discs (such as DVDs) is presented. By using the metal layer of the disc as the main radiating element, it is possible to overcome the severe limitations of the existing tags for disc identification in terms of read range and bandwidth. The design and synthesis process, based on the proposed circuit model of the tag, is described. A worldwide UHF-RFID tag prototype, for direct mounting on a DVD disc, is designed and fabricated. The measured read range demonstrates that the presented method drastically improves the performance within the whole UHF-RFID band (840-930 MHz), in comparison to the DVD tags found in the available literature.