Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 38
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

The Personal Glucose Meter as the Measurement Principle in Point-of-Care Applications

  • Cano, Mònica
  • Valle, Manel del|||0000-0002-1032-8611
A personal glucose meter (PGM) is a medical device that measures blood glucose levels and can be found worldwide. Owing to their sensitivity, simplicity, portability, and low cost, PGMs stand as one of the most frequently utilized analytical methods. This work reviews the different applied methodologies for detecting analytes other than glucose employing a PGM and how it can be incorporated for point-of-care diagnosis needs. To visualize the variants, first, a classification is made according to the biorecognition elements used (aptamers, antibodies, etc.), and where the determination of different analytes is done through the glucose signal using different glucose-generating enzymes such as invertase or glucosidase. Transduction can also be based on the use of nanocarriers that generally encapsulate glucose, although it is also possible to find a combination of the two aforementioned strategies. The PGM can also be used for the direct detection of interfering substances of the biosensor, such as NADH or paracetamol. Lastly, we discuss how a PGM might have been implemented to detect COVID-19 and how it could be used on a massive scale for the point-of-care diagnosis of a pandemic.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electronic Tongue Based on Laser-Induced Graphene Electrodes for Monitoring Ions in Aqueous Media

  • Hensel, Rafael C.|||0000-0001-7060-6604
  • Cetó, Xavier|||0000-0003-1589-6076
  • Oliveira, Osvaldo N.|||0000-0002-5399-5860
  • Valle, Manel del|||0000-0002-1032-8611
This work describes the use of a portable 450 nm wavelength laser system to fabricate an electronic tongue (e-tongue) comprising an array of potentiometric laser-induced graphene (LIG) sensors on polyimide. The sensing units were modified with ion-selective polymer membranes for the detection of Ca , Na, and K. The sensors exhibited pseudo-Nernstian behavior, with sensitivities of 32.7 ± 0.8, 63 ± 3, and 52 ± 2 mV/dec for Ca , Na, and K, respectively, and limits of detection of 4.5 μM for Ca , 606 μM for Na, and 66 μM for K. The qualitative response of the e-tongue was evaluated using principal component analysis (PCA), which allowed a clear distinction between monovalent and divalent ions based on the first two principal components. Discrimination among the three ions at concentrations of 20 μM, 220 μM, and 4.0 mM was achieved using the K-means clustering algorithm, with a silhouette coefficient of 0.946, close to the ideal value. Quantitative analysis using artificial neural networks (ANNs) was applied to ternary mixtures of the three ions, enabling simultaneous and accurate prediction of individual ion concentrations down to 10 μM. Furthermore, we demonstrate the capability of the e-tongue to provide reliable measurements even at trace ion concentrations in mineral water samples, confirming its suitability for precise and sensitive ion monitoring in complex, real-world applications.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemically generated metal-doped 2D-cobalt(M)MOFs@C derivatives for boosting the electrocatalytic oxidation of glycerol to formate

  • Hernandez-Salvador, Sergio
  • Montiel, Miguel A.
  • Molina, M. Asuncion
  • Calvente, Juan Jose
  • Beale, Andrew M.
  • Solla-Gullon, Jose
  • Olloqui-Sariego, Jose Luis
  • Río-Rodríguez, José Luis del
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Glycerol is an underutilized waste product that is abundantly available from the biodiesel industry. Electrocatalytic oxidation of glycerol (GOR) to formate offers an environmentally friendly and cost-effective approach to valorizing glycerol. In this study, we have developed new types of metal-doped cobalt metal-organic frameworks, which are grown directly on a carbon matrix via a one-pot synthesis as electrocatalyst precursors. In-depth structural analysis has revealed that, in the Ni-doped cobalt MOF, Ni substitutes a fraction of Co sites isomorphically, forming isolated Ni(II) centers, while Cu is present as a mixture of Cu(II) and metallic Cu, with the majority in the oxidized form as highly dispersed species and a small fraction forming nanoparticles. These materials were then subjected to a controlled potential-induced surface reconstruction to produce mixed-metal oxide/oxyhydroxide-like environments interconnected through M-O-M motifs, the extent of the reconstruction depending strongly on the dopant metal. The metal-doped derivatives were tested as electrocatalysts for the alkaline electrooxidation of glycerol using in-house designed electrochemical reactors with different cell configurations and operating modes. We demonstrated that metal-doped derivative phases exhibit improved electrocatalytic activity for GOR compared to the monometallic counterpart. These catalysts yield significant glycerol conversion rates under single-pass operation, with improved Faradaic efficiencies towards formate (up to 70%) and low energy consumption (< 320 kWh kmol(- 1)), while suppressing the complete oxidation of glycerol to carbonate or CO2. This work provides new insight into the rational design of metal-doped MOF derivatives as highly active and selective electrocatalysts for the practical glycerol valorization., The authors thank the financial support from the Spanish Govern-ment (PID2021-126799NB-I00, PID2022-140111OB-I00, PID2022-13 8491OB-C32, TED2021-130191B-C41, TED2021-130191B-C42 and RED2022-134120-T funded by MCIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR) . This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from the European Union Next Generation EU (PRTR-C17. I1) , by Generalitat Valenciana (MFA/2022/047, CIPROM/2022/10) . In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. This work was also funded by "Ayuda a Primeros Proyectos de Investigacion (PAID-06-24) . J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. S.G.T. thanks the Uni-versitat Politecnica de Valencia for her postdoctoral contract PAID-10-23. M.A.M. acknowledges funding from the EPSRC InFUSE Prosperity Partnership (EP/V038044/1) . The authors acknowledge ALBA Syn-chrotron for access to the NOTOS beamline under Proposal 2023097780 and Diamond Light Source for access to Beamline B18 under Proposal SP45829-1. The authors also thank Eduardo Villalobos, Carlo Marini and the B18 beamline staff for their assistance during the XAS mea-surements. The Electron Microscopy Service of the UPV is acknowledged for their help in sample characterization. Financial support by Severo Ochoa Centre of Excellence program (CEX2021-001230-S) is gratefully acknowledged. Authors are also grateful to Ana Cristina Martinez Cantos (Institute of Electrochemistry, University of Alicante) for her work in the identification and determination of products in the glycerol electro-oxidation process.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selective design of MOF-derived electrocatalytic interphases by potential-driven surface reconstruction

  • Hernández-Salvador, S
  • Márquez, Inmaculada
  • Calvente, Juan José
  • Río-Rodríguez, José Luis del
  • Andreu, Rafael
  • Olloqui Sariego, José Luis
  • Gutiérrez-Tarriño, Silvia
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] Metal-organic frameworks (MOFs) can be used as precursors for the directed synthesis of derived materials with enhanced performance for electrocatalysis. Herein, we report on an in-situ electrochemical strategy for the selective synthesis of hybrid electrocatalysts using a cobalt MOF (2D-CoMOF) as a precursor for constructing electrochemical sensors to monitor the glucose oxidation reaction (GOR). By using in-situ Raman spectroelectrochemistry, it is demonstrated that a precise control of the applied potential during amperometric treatment of 2D-CoMOF can promote the generation of derived heterostructures in which the original MOF coexists with metal oxides and/or oxyhydroxides (MOF-MOx) with different compositions. The so-prepared electrodes exhibit high electroactive surface areas, a high number of electrocatalytically active cobalt sites and an efficient charge transport across the catalytic film. Moreover, their composition-dependent electrocatalytic performance for the glucose oxidation reaction is examined, establishing a relationship between the applied potential, the macroscopic chemical composition of the heterostructure and the electrocatalytic performance for glucose sensing. In particular, the hybrid phases consisting of Co-MOF/Co3O4/CoOOH display superior electrocatalytic sensing performance with a wide linear concentration range and high sensitivity. The present work emphasizes the significance that the precise control of the applied potential has on the electrochemically-assisted MOF transformation for developing highly efficient MOF-derived electrocatalysts., Authors thank the financial support by the grants PID2021-126799NB-I00 and PID2022-140111OB-I00 funded by MICIU/AEI/ 10.13039/501100011033 and by ERDF/EU, TED2021-130191B-C41, TED2021-130191B-C42 and RED2022-134120-T funded by MICIU/AEI/ 10.13039/501100011033 and ERDF A way for making Europe, and European Union Next Generation EU/PRTR. Authors acknowledge funding from Junta de Andalucía (P20 01027 and PYC 20 RE 060 UAL. Financial support by Severo Ochoa centre of excellence program (CEX2021-001230-S) is gratefully acknowledged. This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047). S.G.T. thanks the Universitat Politecnica de Valencia for her postdoctoral contract PAID10-23. J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Second Life of Cobalt MOF: Alternating Magnetic Field- Assisted Electrocatalytic Oxygen Evolution Reaction in MOF-derived Nanoparticles

  • del Río-Rodríguez, Jose Luis
  • Márquez, Inmaculada
  • Gallo-Cordova, Álvaro
  • Molina, M. Asunción
  • Martínez, Jordan Santiago
  • Calvente, Juan José
  • Beale, Andrew M.
  • Morales, Maria del Puerto
  • Olloqui Sariego, José Luis
  • Gutiérrez-Tarriño, Silvia
  • Cerezo-Navarrete, Christian
  • Oña-Burgos, Pascual|||0000-0002-2341-7867
[EN] A major challenge in hydrogen production from water electrolysis is the slow kinetics of oxygen evolution (OER). Applying an alternating magnetic field (AMF) to ferromagnetic metal nanoparticles on electrodes has gained attention due to the generation of a thermally activated electrocatalyst, which can boost OER performance. This work studies the influence of external parameters and intrinsic characteristics of carbon-encapsulated cobalt MOF-derived nanoparticles deposited onto graphite paper electrodes on the electrocatalytic AMF-OER coupled process. Specifically, the impact of AMF strength, the electrolyte composition (concentration and cation nature) and cobalt content on the electrocatalytic AMF-OER performance are thoroughly investigated. Results reveal that AMF significantly boosts OER activity of Co@C-based electrodes, their enhancement being strongly dependent on the electrolyte composition. Furthermore, both the heating capacity of the herein synthesized catalyst for magnetic hyperthermia and their structural features remain intact after an intense and prolonged electrocatalytic AMF-OER experiment. No signs of sintering, leaching, or particle size increase, which are typical issues observed when metal nanoparticles are subjected to an intense external magnetic field, have been found. This underscores the high operational stability of this catalyst. These findings provide new insights into thermal AMF-assisted alkaline water oxidation for developing high-performance catalysts for enhanced electrocatalysis., Financial support by Severo Ochoa Centre of Excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2021-126799NB-I00, PID2022-140111OB-I00, TED2021-130191B-C41, TED2021-130191B-C42, TED2021-130191B-C43 and RED2022-134120-T funded by MCIU/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from the European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047) and Generalitat Valenciana (CIPROM/2022/10). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. This work was also funded by "Ayuda a Primeros Proyectos de Investigacion (PAID-06-24)." J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. SGT thanks the Universitat Politecnica de Valencia for her postdoctoral contract PAID-10-23. The authors thank Diamond Light Source, particularly the B18 beamline team and D. Gianolio, for their support during the XAS measurements (proposal SP40577-1). M.A.M. acknowledges Laurelin project (European Union's Horizon 2020 - Reference: 101022507) for PDRA contract at UCL.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Non-enzymatic glucose sensor using mesoporous carbon screen-printed electrodes modified with cobalt phthalocyanine by phase inversion

  • González-Sánchez, María I.
  • Khadhraoui, Hanen
  • Jiménez-Pérez, Rebeca
  • Iniesta, Jesus
  • Valero, Edelmira
  • Iniesta, Jesus|||/items/9131f62f-f4a8-44bf-83be-90c9270e5d9d
The development of non-enzymatic glucose electrochemical sensors is still required to be used for the determination of glucose in complex biological media. This study presents a straightforward and remarkably efficient tool for the preparation of highly stable and sensitive glucose electrochemical sensors based on the deposition of cobalt phthalocyanine (CoPc) onto mesoporous carbon screen-printed electrodes (MCs). Results show that the MC electrochemical activation (aMC) followed by phase inversion (PI), which consisted of drop casting of CoPc in dimethylformamide onto a wetting electrolyte leading to the electrode aMC-CoPc/PI, enhanced sensitivity towards glucose determination in complex media. The beneficial need for MC surface activation and PI has been explored by scanning electron microscopy, energy dispersive X-ray spectroscopy, Raman spectroscopy, cyclic voltammetry and electrochemical impedance spectroscopy. The aMC-CoPc/PI electrode exhibited the highest electrocatalytic activity of the series (namely, MC-CoPc, MC-CoPc/PI and aMC-CoPc) towards glucose oxidation. By using square wave voltammetry technique, the aMC-CoPc/PI glucose electrochemical sensor demonstrated a sensitivity of 22.3 µA mM−1 and a low detection limit of 27.4 µM (S/N = 3) in a linear dynamic range of 0.1 to 3.5 mM. Additionally, it also displayed high selectivity, robust stability, repeatability and reproducibility toward the quantification of glucose concentration in complex samples such as horse serum, intravenous glucose saline solution and culture medium for sperm cells.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Electrochemically generated metal-doped 2D-cobalt(M)MOFs@C derivatives for boosting the electrocatalytic oxidation of glycerol to formate

  • Hernández-Salvador, Sergio
  • del Río-Rodríguez, Jose Luis
  • Montiel, Miguel A.
  • Molina, M. Asunción
  • Gutiérrez-Tarriño, Silvia
  • Calvente, Juan José
  • Beale, Andrew M.
  • Oña-Burgos, Pascual
  • Solla-Gullón, José
  • Olloqui-Sariego, José Luis
  • Montiel, Miguel A.|||/items/a285f8f2-9444-460d-bab6-4da82cbf2f6c
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Glycerol is an underutilized waste product that is abundantly available from the biodiesel industry. Electrocatalytic oxidation of glycerol (GOR) to formate offers an environmentally friendly and cost-effective approach to valorizing glycerol. In this study, we have developed new types of metal-doped cobalt metal-organic frameworks, which are grown directly on a carbon matrix via a one-pot synthesis as electrocatalyst precursors. In-depth structural analysis has revealed that, in the Ni-doped cobalt MOF, Ni substitutes a fraction of Co sites isomorphically, forming isolated Ni(II) centers, while Cu is present as a mixture of Cu(II) and metallic Cu, with the majority in the oxidized form as highly dispersed species and a small fraction forming nanoparticles. These materials were then subjected to a controlled potential-induced surface reconstruction to produce mixed-metal oxide/oxyhydroxide-like environments interconnected through M-O-M motifs, the extent of the reconstruction depending strongly on the dopant metal. The metal-doped derivatives were tested as electrocatalysts for the alkaline electrooxidation of glycerol using in-house designed electrochemical reactors with different cell configurations and operating modes. We demonstrated that metal-doped derivative phases exhibit improved electrocatalytic activity for GOR compared to the monometallic counterpart. These catalysts yield significant glycerol conversion rates under single-pass operation, with improved Faradaic efficiencies towards formate (up to 70%) and low energy consumption (< 320 kWh kmol−1), while suppressing the complete oxidation of glycerol to carbonate or CO2. This work provides new insight into the rational design of metal-doped MOF derivatives as highly active and selective electrocatalysts for the practical glycerol valorization.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Highly sensitive ammonia sensing at room temperature with Ce/Pr mixed oxide/oxidized MWCNT composite

  • Aguirre-Cortés, Jhon Mauricio
  • Villa-Díaz, Miriam
  • Baeza-Romero, María Teresa
  • Solla-Gullón, José
  • Valero, Edelmira
  • Solla-Gullón, José|||/items/59027465-51a1-4647-8345-0b316b59de48
Ammonia is a hazardous atmospheric pollutant of major industrial relevance, yet reliable room-temperature (RT) detection in real conditions remains challenging for conventional metal-oxide sensors due to high operating temperatures, poor sensitivity and selectivity, humidity effects and limited real air validation. Herein, we report a chemiresistive NH3 gas sensor based on a Ce/Pr mixed oxide nanocomposite with oxidized multi-walled carbon nanotubes. The sensing layer, deposited by a simple and cost-effective airbrush spray-coating technique and thoroughly structurally and morphologically characterized, exhibits superior detection performance at RT. In real air at 40% relative humidity and RT, the sensor exhibits an exceptionally strong and low-noise response of 7.1% to just 200 ppb NH3, whereas the mixed oxide alone showed no detectable signal below 10 ppm. Furthermore, the device achieves an ultra-low detection limit of ∼60 ppb and an unusually broad linear range of more than three orders of magnitude (0.2–500 ppm), supported by 32 concentration points. Notably, the sensor response remains stable across a wide relative humidity range (35% to 70%) and displays excellent operational stability by retaining a reproducible signal over 240 consecutive measurements in real air. Selectivity tests demonstrated negligible cross-sensitivity to common gases (CH4, CO, CO2, H2) and representative volatile organic compounds. Importantly, equivalent response amplitudes were obtained when alternating between real and synthetic air, which underscores the sensor’s reliability in real environments. Overall, these results establish this hybrid material as a robust and highly sensitive platform for sub-ppm ammonia detection in challenging samples such as air and breath.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Self-assembled monolayers of 6-amino-1-hexanethiol on gold as a potential form of surface functionalization in the construction of biocompatible platforms

  • Humanes, Irene
  • Chávez, Miriam
  • Fernández-Merino, Ángela
  • Del Caño-Ochoa, Rafael
  • Sánchez-Obrero, Guadalupe
  • Madueño, Rafael
  • Blázquez, Manuel
  • Pineda, Teresa
Self-assembled-monolayers (SAMs) of amino-terminated alkanethiols and, in particular 6-amino-1-hexanethiol (AHT), are usually integrated in functional platforms as the presence of the amino groups in the interface facilitates the derivatization reactions. The chain length of AHT is very appropriate as building block because possess enough methylene units to direct the organization of the molecules in the SAM and, at the same time, is short to allow the communication of the electrode with the rest of the system. However, most of the studies on the characterization of these SAMs are dedicated to amino-alkanethiols with two or eleven methylene units and, no systematic electrochemical studies have been directed to the AHT-SAM. The use of Ru (NH3)6Cl3 redox probe to monitor the changes in the SAM interface with the solution pH, allows us to observe two inflections in the variations of either the current density, or the peak potentials as well as in the heterogeneous rate constants whether they are determined by cyclic voltammetry or electrochemical impedance spectroscopy. These inflections cannot correspond to apparent dissociation pK of different chemical species, but they should inform about different distribution and organization of the amino groups in the interface depending on the local solution pH. This complexity is also found in the behavior of the reductive desorption signals that do not follow the peak potential variation with pH according to the Nernst equation, but show a dependence on the crystallinity of substrate and variations of that would indicate a kinetics effect on the ion H+ penetration into the layer to compensate for the thiolate anion protonation, and the existence of regions with intra-layer hydrogen bonds that coexist with regions of protonated amino groups. A decrease in reductive desorption charge density with decreasing pH is thought to be due to the catalytic reaction of hydrogen evolution that masked the complete reduction of the monolayer. Contact angle measurements define a SAM that becomes less hydrophilic at high pH. No multilayer films are observed as stated by XPS that shows a S 2p peak containing only the signal corresponding to the Ssingle bondAu bond. These results can help in the design of new functional platforms that use the AHT-SAM as the first step in their construction.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multiplex Portable Biosensor for Bacteria Detection

  • Kaci, Karim
  • Enebral-Romero, Estefanía
  • Martínez-Periñán, Emiliano
  • Garrido, Marina
  • Pérez, Emilio M.
  • López-Diego, David
  • Luna, Mónica
  • González de Rivera, Guillermo
  • García-Mendiola, Tania
  • Lorenzo, Encarnación
An advanced, cost-effective, and portable DNA biosensor capable of detecting multiple bacteria simultaneously has been developed. The biosensor comprises a fast and inexpensive potentiostat that controls the applied potential to a screen-printed electrochemical array platform functionalized with MoS2 flakes and bacterial DNA probes. The current response obtained by à la carte thionine functionalized carbon nanodots (Ty-CDs) is monitored as an electrochemical indicator of the hybridization event. The design of the potentiostat prioritizes achieving an optimal signal-to-noise ratio and incorporates a user-friendly interface compatible with various devices, including computers, mobile phones, and tablets. The device is compact, lightweight, and manufactured at a low cost. The key components of the potentiostat include a data acquisition board capable of analyzing multiple samples simultaneously and a controller board. The results of this study confirm the ability of the multiplex portable biosensor to successfully detect specific bacterial DNA sequences, demonstrating its reliability and superior performance compared with a traditional, more complex, and laboratory-oriented potentiostat., This work has been financially supported by the Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, PID2020-116661RB-I00), Spanish Ministry of Science, Innovation, and Universities (Red de “Sensores y Biosensores Electroquímicos: retos ante la transformación digital e industrial” RED2022-134120-T). Estefanía Enebral-Romero received contract financial support as a predoctoral researcher funded by grant CEX2020-001039-S, supported by CIN/AEI/10.13039/501100011033. This work have also been funded by CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). Comunidad de Madrid (P2018/NMT-4367, and MAD2D-CM)-UCM” project funded by Comunidad de Madrid, by the Recovery, Transformation and Resilience Plan, and by NextGenerationEU from the European Union. IMDEA Nanociencia receives support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (MINECO, Grant CEX2020-001039-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2020-001039-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rapid and simple viral protein detection by functionalized 2D MoS2/graphene electrochemiluminescence aptasensor

  • Gutiérrez-Gálvez, Laura
  • El Hajioui-El Ghalbzouri, Hanaa
  • Enebral-Romero, Estefanía
  • Garrido, Marina
  • Naranjo, Alicia
  • López-Diego, David
  • Luna, Mónica
  • Pérez, Emilio M.
  • García-Mendiola, Tania
  • Lorenzo, Encarnación
In this work we present the development of an electrochemiluminescence aptasensor based on electrografting molybdenum disulphide nanosheets functionalized with diazonium salt (MoS2-N2+) upon screen-printed electrodes of graphene (SPEs GPH) for viral proteins detection. In brief, this aptasensor consists of SPEs GPH electrografted with MoS2-N2+ and modified with a thiolated aptamer, which can specifically recognize the target protein analyte. In this case, we have used SARS-CoV-2 spike protein as model protein. Electrochemiluminescence detection was performed by using the [Ru(bpy)3]2+/TPRA (tripropylamine) system, which allows the specific detection of the SARS-CoV-2 spike protein easily and rapidly with a detection limit of 9.74 fg/mL and a linear range from 32.5 fg/mL to 50.0 pg/mL. Moreover, the applicability of the aptasensor has been confirmed by the detection of the protein directly in human saliva samples. Comparing our device with a traditional saliva antigen test, our aptasensor can detect the spike protein even when the saliva antigen test gives a negative result., This work has been financially supported by the Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, RED2022-134120-T) and Community of Madrid (TRANSNANOAVANSENS (S2018/NMT-4349) and FotoArt (P2018/NMT-4367)). E.M.P. acknowledges funding from the Ministerio de Ciencia, Innovación y Universidades (PID2020-116661RB-I00), and Comunidad de Madrid “Materiales Disruptivos Bidimensionales (2D)” (MAD2D-CM)-UAM and (MAD2D-CM)-IMDEA-NC funded by the Recovery, Transformation and Resilience Plan, and by NextGenerationEU from the European Union. IMDEA Nanoscience acknowledges support from the ‘‘Severo Ochoa’’ Programme for Centres of Excellence in R&D CEX2020-001039-S. We also acknowledge the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bismuthene - Tetrahedral DNA nanobioconjugate for virus detection

  • Enebral-Romero, Estefanía
  • García-Fernández, Daniel
  • Gutiérrez-Gálvez, Laura
  • López-Diego, David
  • Luna, Mónica
  • García-Martín, Adrián
  • Salagre, Elena
  • Michel, Enrique G.
  • Torres, Íñigo
  • Zamora, Félix
  • García-Mendiola, Tania
  • Lorenzo, Encarnación
In this work, we present an electrochemical sensor for fast, low-cost, and easy detection of the SARS-CoV-2 spike protein in infected patients. The sensor is based on a selected combination of nanomaterials with a specific purpose. A bioconjugate formed by Few-layer bismuthene nanosheets (FLB) and tetrahedral DNA nanostructures (TDNs) is immobilized on Carbon Screen-Printed Electrodes (CSPE). The TDNs contain on the top vertex an aptamer that specifically binds to the SARS-CoV-2 spike protein, and a thiol group at the three basal vertices to anchor to the FLB. The TDNs are also marked with a redox indicator, Azure A (AA), which allows the direct detection of SARS-CoV-2 spike protein through changes in the current intensity of its electrolysis before and after the biorecognition reaction. The developed sensor can detect SARS-CoV-2 spike protein with a detection limit of 1.74 fg mL-1 directly in nasopharyngeal swab human samples. Therefore, this study offers a new strategy for rapid virus detection since it is versatile enough for different viruses and pathogens., This work has been financially supported by the Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, RED2022-134120-T), Spanish Ministry of Science, Innovation and Universities (TED2021-129738B–I00) and Community of Madrid (REACT-UE NANOCOV-CM, TRANSNANOAVANSENS, S2018/NMT-4349). Estefanía Enebral-Romero thanks the financial support of “Nanotecnología para detección del SARS-CoV-2 y sus variantes. NANOCOV” project and a contract as a predoctoral researcher funded by grant CEX2020-001039-S, supported by MCIN/AEI/10.13039/501100011033. Laura Gutiérrez-Gálvez was supported by a Formación del Profesorado Universitario (FPU) grant from the Spanish Ministry of Universities (FPU19/06309). Daniel García-Fernández and Adrián García-Martín were supported by a Programa Investigo grant from Autonomous Community of Madrid in the framework of the Plan de Recuperación, Transformación y Resiliencia financed by the European Union – NextGenerationEU (09-PIN1-00013.4/2022- 83rd and 66rd place, respectively). The authors acknowledge the support of the European Union (EU) and Horizon 2020 through Instruct Proposal PID: 21859, and the CRIOMECORR project (ESFRI-2019-01-CSIC-16) to the cryoEM CNB-CSIC facility. F. Z. acknowledges financial support from the Spanish Ministry of Science and Innovation, through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2023-001316-M, PDC2021-120782-C21, and PID2022-138908NB-C31), the “(MAD2D-CM)-UAM” project funded by Comunidad de Madrid, by the Recovery, Transformation and Resilience Plan, and by NextGenerationEU from the European Union. F.Z. also acknowledge support from the European Innovation Council under grant Agreement 101047081 (EVA). EGM acknowledges financial support from the Spanish Ministry of Science and Innovation, through the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2018-000805-M) and through grant PID2021-123295NB-I00. We also acknowledge María U. González help with Fluorescence Microscopy and the service from the MiNa Laboratory at IMN, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rapid SARS-CoV-2 sensing through oxygen reduction reaction catalysed by Au@Pt/Au core@shell nanoparticles

  • Martínez-Periñán, Emiliano
  • Palomares-Albarrán, María
  • Toyos-Rodríguez, Celia
  • Mateo-Martí, Eva
  • Pariente, Félix
  • Escosura-Muñiz, Alfredo de la
  • Gutiérrez-Sánchez, Cristina
  • Revenga-Parra, Mónica
  • Lorenzo, Encarnación
The development of rapid, accurate, sensitive, and low-cost diagnostic methods for COVID-19 detection in real-time is the unique way to control infection sources and monitor illness progression. In this work, we propose an electrochemical biosensor for the rapid and accuracy diagnosis of COVID-19, through the determination of ORF1ab specific sequence. The biosensor is based on the immobilization of a thiolated sequence partially complementary (domain 1) to ORF1ab on gold screen-printed electrodes and the use of bifunctional Au@Pt/Au core@shell nanoparticles modified with a second thiolated sequence partially complementary to ORF1ab (domain 2) as electrochemical indicator of the hybridization of DNA sequences. The synthesized Au@Pt/Au nanoparticles consist of an Au core, a shell of Pt (Au@Pt NPs), that provides an excellent electrocatalytic activity toward the oxygen reduction reaction (ORR) even after formation of hybrid biomaterials by modification, through the Au protuberances growth on the NPs surface, with an oligonucleotide with recognition ability. The ORR electrochemical activity, enhanced by the label element (Au@Pt/Au NPs), has been employed, for the first time, as indicator of the hybridization event. Based on this strategy, target sequences of the SARS-CoV-2 virus have been detected with a detection limit of 32 pM. The selectivity of the biosensor was confirmed by analysing ORF1ab sequence in the presence of DNA sequences from other viruses. The biosensor has been successfully applied to the direct detection of the virus in non-amplified samples of nasopharyngeal swabs from infected and non-infected patients. Results compare well with those obtained through RT-qPCR but our method is more rapid since does not need any amplification process., The authors wish to express their sincere thanks to the Spanish Ministerio de Ciencia e Innovación (MICINN) ( PID2020-116728RB-I00 , PID2020-115204RB-I00 , PID2022-140180OB-C22 , PID2022-142262OA-I00 , TED2021-129738B–I00 , RED2022-134120-T ) and the Comunidad Autónoma de Madrid ( S2018/NMT-4349 TRANSNANOAVANSENS-CM Program, SI3/PJI/2021–00341 ) for the financial support. The authors also acknowledge the Microbiology Service and the Biobank of the La Paz University Hospital for preparing and providing COVID-19 samples and Santos Gálvez-Martínez for his collaboration in XPS measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Compelling DNA intercalation through 'anion-anion' anti-coulombic interactions: boron cluster self-vehicles as promising anticancer agents

  • Gutiérrez Gálvez, Laura
  • García Mendiola, Tania
  • Lorenzo, Encarnación
  • Nuez Martinez, Miquel
  • Ocal, Carmen
  • Yan, Shunya
  • Teixidor, Francesc
  • Pinheiro, Teresa
  • Marques, Fernanda
  • Viñas, Clara
Anticancer drugs inhibit DNA replication by intercalating between DNA base pairs, forming covalent bonds with nucleotide bases, or binding to the DNA groove. To develop safer drugs, novel molecular structures with alternative binding mechanisms are essential. Stable boron hydrides offer a promising alternative for cancer therapy, opening up additional options like boron neutron capture therapy based on 10B and thermal neutron beams or proton boron fusion therapy using 11B and proton beams. These therapies are more efficient when the boron compound is ideally located inside cancer cells, particularly in the nucleus. Current cancer treatments often utilize small, polycyclic, aromatic, planar molecules that intercalate between ds-DNA base pairs, requiring only a spacing of approximately 0.34 nm. In this paper, we demonstrate another type of intercalation. Notably, [3,3'-Fe(1,2-C2B9H11)2]-, ([o-FESAN]-), a compact 3D molecule measuring 1.1 nm × 0.6 nm, can as well intercalate by strong non-bonding interactions preferentially with guanine. Unlike known intercalators, which are positive or neutral, [o-FESAN]- is a negative species and when an [o-FESAN]- molecule approaches the negatively charged DNA phosphate chain an anion-anion interaction consistently anti-electrostatic via Ccluster-H⋯O-P bonds occurs. Then, when more molecules approach, an elongated outstandingly self-assembled structure of [o-FESAN]--[o-FESAN]- forms moving anions towards the interthread region to interact with base pairs and form aggregates of four [o-FESAN]- anions per base pair. These aggregates, in this environment, are generated by Ccluster-H⋯O-C, N-H⋯H-B and Ccluster-H⋯H-B interactions. The ferrabis(dicarbollide) boron-rich small molecules not only effectively penetrate the nucleus but also intercalate with ds-DNA, making them promising for cancer treatment. This amphiphilic anionic molecule, used as a carrier-free drug, can enhance radiotherapy in a multimodal perspective, providing healthcare professionals with improved tools for cancer treatment. This work demonstrates these findings with a plethora of techniques., Authors received support from the Spanish Ministerio de Economía y Competitividad (PID2020-116728RB-I00, PID2022-136802NB-I00, RED2022-134120-T and TED2021-129738B-I00), the Generalitat de Catalunya (2017SGR1720). L. Gutiérrez-Gálvez was supported by FPU19/06309 grant from the Spanish Ministry of Universities. S. Y. was supported by the China Scholarship Council (CSC) under Grant No. 202006990034., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tetrahedral DNA nanostructures, graphene and carbon nanodots-based electrochemiluminescent biosensor for BRCA1 gene mutation detection

  • García-Fernández, Daniel
  • Gutiérrez-Gálvez, Laura
  • López-Diego, David
  • Luna, Mónica
  • Torres, Íñigo
  • Zamora, Félix
  • Solera, Jesús
  • García-Mendiola, Tania
  • Lorenzo, Encarnación
In this study, we present a novel electrochemiluminescent DNA biosensor designed for detecting breast cancer type 1 (BRCA1) gene mutations. The biosensor integrates graphene nanosheets (Graph-NS), tetrahedral DNA nanostructures (TDNs), and carbon nanodots (CNDs) to enhance sensitivity and specificity. Graph-NS are employed to structure the transducer and serve as a platform for DNA immobilization. TDNs are engineered with a BRCA1 gene-specific capture probe located at the apex (TDN-BRCA1), facilitating efficient biorecognition. Additionally, the basal vertices of TDNs are functionalized with amino groups, enabling their attachment to the CSPE/Graph-NS surface via amino-graphene interaction. This platform effectively identifies single-base mutations in the BRCA1 gene utilizing synthesized CNDs as a coreactant and [Ru(bpy)3]2+ as the luminophore through the coreactant pathway. The developed biosensor demonstrates exceptional sensitivity and can detect a single mutation in the BRCA1 gene. Furthermore, it has been successfully validated in real samples obtained from breast cancer patients, showcasing a remarkable detection limit of 1.41 aM., The Spanish Ministry of Economy and Competitiveness has financially supported this work (PID2020-116728RB-I00, PID2023-150844OB-I00, RED2022-134120-T and TED2021-129738B–I00). Spanish Ministry of Universities supported Laura Gutiérrez-Gálvez with a FPU (FPU19/06309). European Union, through Autonomous Community of Madrid supported Daniel García-Fernández with a Programa Investigo grant in from the Plan de Recuperación, Transformación y Resiliencia– NextGenerationEU (09-PIN1-00013.4/2022-Puesto 83). The authors acknowledge the support of the EU and Horizon 2020 through Instruct Proposal PID: 21859, and the CRIOMECORR project (ESFRI-2019-01-CSIC-16) to the cryoEM CNB-CSIC facility. The authors also appreciate the service from the MiNa Laboratory at IMN, and funding from EU (FEDER, FSE), MINECO (project CSIC13-4E-1794) and CM (project S2018/NMT-4291 TEC2SPACE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of electrostatic immobilization on the electrochemistry of human and horse cytochrome c

  • Olloqui-Sariego, José Luis
  • Márquez, I
  • Guerra-Castellano, Alejandra
  • Molero, M
  • Rosa, Miguel A. de la
  • Calvente, Juan José
  • Díaz-Moreno, Irene
  • Andreu, Rafael
Protein film voltammetry is a sensitive tool to characterize the electron transfer properties of redox proteins in a variety of environments and conformational states. Here, a detailed voltammetric study aimed to explore the effect of electrostatic immobilization on the electron transfer thermodynamics and kinetics of adsorbed human- and horse- cytochrome c was carried out. For this purpose, the two cytochromes were adsorbed on thiol monolayers (SAM) with different immobilization strengths and donor–acceptor distances. While thermodynamic redox parameters do not seem to be affected by the monolayer thickness and charge density, electron transfer kinetics are significantly modulated by the protein immobilization strength. Stronger protein–SAM electrostatic interactions result in lower electron transfer rates in both non-adiabatic and friction kinetic regimes. This behavior is further characterized by smaller pre-exponential factors and activation enthalpies in Arrhenius type plots. These kinetic results in the physiologically relevant non-adiabatic electron transfer regime are shown to be consistent with the recently developed Matyushov's theoretical formulation of protein electron transfer. Moreover, a comparison between the kinetic parameters of the two cytochrome variants supports the hypothesis that differences between their electron transfer rates originate in their structural flexibility to accommodate the conformational changes required to form the precursor complex between cytochrome and a negatively charged redox partner., Authors thank the financial support by the grants PID2021–126799NB–I00, PID2021-126663NB-I00, funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU, TED2021-130191B-C42 and RED2022-134120-T funded by MCIU/AEI/10.13039/501100011033 and ERDF A way for making Europe, and European Union Next GenerationEU/PRTR, Andalusian Government (BIO-198, US/JUNTA/FEDER; to I.D.-M.) and Ramón Areces Foundation (2021-2024 to I.D.-M.). This publication is part of the grant POSTD.O.C_21_00395, financed by the Junta de Andalucía/CUII and by the ESF+” (for A.G.-C.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advancing diagnostics with BODIPY-bismuthene DNA biosensors

  • Gutiérrez-Gálvez, Laura
  • Enebral-Romero, Estefanía
  • Valle Amores, Miguel Ángel
  • Pina Coronado, Clara
  • Torres, Iñigo
  • López-Diego, David
  • Luna, Mónica
  • Fraile, Alberto
  • Zamora, Félix
  • Alemán, José
  • Álvarez, Jesús
  • Capitán, M. J.
  • Lorenzo, Encarnación
  • García-Mendiola, Tania
In this work, an electrochemical biosensor is prepared based on few-layer bismuthene hexagons (FLBHs) and a water-soluble BODIPY (BDP) derivative (BDP-NaSO3) for early infection diagnosis. In particular, the detection in advance of a virus sequence in nasopharyngeal swab samples was developed. The combination of the FLBHs and BDP-NaSO3 facilitates the direct, sensitive, and specific detection of gene viruses without the need for any prior amplification step. This work demonstrates that the FLBHs provide an improved electrochemical platform for immobilizing thiolated DNA capture probes that increase the sensitivity of the biosensor, while BDP-NaSO3 serves as a newly powerful electrochemical indicator of the hybridization event. As a proof of concept, SARS-CoV-2 was selected as the model virus. The developed biosensor demonstrated selective, rapid, and straightforward detection of the specific sequence RNA-dependent RNA-polymerase (RdRp) of SARS-CoV-2 with a detection limit of 4.97 fM and a linear range from 16.6 fM to 100 fM. Furthermore, this platform successfully detects the virus directly in nasopharyngeal swab samples with a viral load of at least 19 Cts without being subjected to any prior amplification stage. Finally, the high stability of the biosensor response, which has been working under ambient conditions for over one month, the selectivity and rapidity for specific virus detection, and the requirement of low-volume samples for the determination are remarkable characteristics that make it ideal for its potential application in clinical diagnosis in point-of-care settings., This work was financially supported by the Spanish Ministry of Economy and Competitiveness (PID2020-116728RB-I00, RED2022-134120-T, PID2023-150844OB-I00, PID2022- 138908NB-C31, and PID2021-122299NB-I00), the Community of Madrid (REACT-UE NANOCOV-CM and Y2020/NMT6469), the Spanish Ministry of Science, Innovation and Universities (TED2021-129738B-I00, TED2021-130470B-I00, and TED2021- 129999B-C32) and the “María de Maeztu” Programme for Units of Excellence in R&D, CEX2023-001316-M. Laura Gutiérrez-Gálvez gratefully acknowledges the financial support of a Formación del Profesorado Universitario (FPU) grant from the Spanish Ministry of Universities (FPU19/06309). Estefanía Enebral-Romero received financial support from the “Nanotecnología para detección del SARS-CoV-2 y sus variantes, NANOCOV” project and a contract as a pre-doctoral researcher funded by a grant CEX2020-001039-S, supported by MCIN/AEI/10.13039/501100011033. We also acknowledge María U. González and Raquel Alvaro for their help with fluorescence microscopy and EDAX mapping, respectively, and the services of the MiNa Laboratory at IMN and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and the EU (FEDER, FSE). We also acknowledge the “Servicio de Microbiología, Hospital Universitario Ramón y Cajal and Instituto Ramón y Cajal de Investigación Sanitaria (IRYCIS)” for providing the clinical samples. We acknowledge the support from the “(MAD2D-CM)-UAM” project funded by Comunidad de Madrid by the Recovery, Transformation and Resilience Plan and by NextGenerationEU from the European Union., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The two yeast cytochrome c isoforms differentially regulate supercomplex assembly and mitochondrial electron flow

  • Guerra-Castellano, Alejandra
  • Aneas, Manuel
  • Tamargo-Azpilicueta, Joaquín
  • Márquez, Inmaculada
  • Olloqui-Sariego, José Luis
  • Calvente, Juan José
  • Rosa, Miguel A. de la
  • Díaz-Moreno, Irene
Table contains details of the trade names associated with this document Tradename Country Manufacturer BlueStar PLUS Prestained Protein Marker Abbott Ultraflextreme matrix assisted laser desorption ionization time of flight mass spectrometer Bruker Dounce homogenizer Ultrasonics SFX25 Branson AUTOLAB PGSTAT 30 system Eco Chemie XCell SureLock Mini-Cell Cary Eclipse spectrofluorometer Varian SEQUEST HT search engine fast protein liquid chromatography system BioTools 3.2 software Bruker Daltonics Nuvia-S column United States Biorad Q Exactive Plus Orbi-trap mass spectrometer Thermo V-650 spectrophotometer Jasco BioChain Cytochrome c Oxidase Activity Assay Kit commercial sequencing service Portugal StabVida Nova 2.1 Metrohm KOD Hot Start DNA Polymerase Sigma Aldrich Image Lab software OriginPro Version 2024 United States OriginLab, Chemicals and CAS Registry Numbers cytochrome c 9007-43-6, 9064-84-0 Cytochromes c Protein Isoforms Reactive Oxygen Species Saccharomyces cerevisiae Proteins, Mitochondria play a crucial role in cellular energy production, signaling and homeostasis. Respiratory supercomplexes represent evolutionary well-conserved, stable associations between membrane complexes and molecules, including proteins and lipids, within the inner mitochondrial membrane. They dynamically respond to metabolic demands and enhance the electron transfer rate, thereby reducing the production of ROS. Recent research has unveiled cytochrome c, a mobile electron carrier between complexes III and IV, as a potential key player in orchestrating the formation of these supra-associations. This study centers on elucidating the role of cytochrome c in modulating the assembly of supercomplexes, using the Saccharomyces cerevisiae yeast as a model system for mitochondrial metabolism. BN-PAGE and mass spectrometry-based proteomic analysis were employed to examine supercomplex organization in yeast strains expressing different cytochrome c isoforms, grown under fermentative and respiratory conditions. Our results demonstrate that both isoforms of cytochrome c contribute to supercomplex assembly, with isoform-2 significantly improving electron transfer and lowering ROS levels. We propose a model in which cytochrome c acts as a scaffold for the recruitment of assembly factors, facilitating the formation of higher order supercomplexes such as III2IV2. This model highlights cytochrome c's role beyond electron transfer, as it regulates supercomplex assembly and mitochondrial homeostasis., We acknowledge Prof. Carlos Santos Ocaña (Andalusian Center for Developmental Biology, CABD) for the Δcyc1 strain. We also acknowledge the facility and scientific and technical assistance of the Biomolecular Mass Spectrometry Service of Pablo de Olavide University., This publication is part of Grant PID2021-126663NB-I00 and PID2021-126799NB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU (to I.D.-M. & M.A.D.R., and J.L.O.-S. & J.J.C., respectively), RED2022-134120-T funded by MICIU/AEI/10.13039/501100011033 (to J.L.O.-S.), Andalusian Government (BIO-198, US/JUNTA/FEDER) and the Ramón Areces Foundation (LEUCYTO-FRA2025-MAR) to M.A.D.R). This publication is part of the grant POSTD.O.C_21_00395, financed by the Junta de Andalucía/CUII and by the ESF+” (to A.G.-C.), and grant FPU22/01094 funded by MICIU/AEI/10.13039/501100011033 and ESF+ (to J.T.-A.), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Second Life of Cobalt MOF: Alternating Magnetic Field- Assisted Electrocatalytic Oxygen Evolution Reaction in MOF-derived Nanoparticles

  • Río Rodríguez, José Luis del
  • Gutiérrez-Tarriño, Silvia
  • Márquez, Inmaculada
  • Gallo-Cordova, Álvaro
  • Molina, M. Asunción
  • Martínez, Jordan Santiago
  • Calvente, Juan José
  • Cerezo-Navarrete, Christian
  • Beale, Andrew M.
  • Morales, María Del Puerto
  • Olloqui-Sariego, Jose Luis
  • Oña-Burgos, Pascual
A major challenge in hydrogen production from water electrolysis is the slow kinetics of oxygen evolution (OER). Applying an alternating magnetic field (AMF) to ferromagnetic metal nanoparticles on electrodes has gained attention due to the generation of a thermally activated electrocatalyst, which can boost OER performance. This work studies the influence of external parameters and intrinsic characteristics of carbon-encapsulated cobalt MOF-derived nanoparticles deposited onto graphite paper electrodes on the electrocatalytic AMF-OER coupled process. Specifically, the impact of AMF strength, the electrolyte composition (concentration and cation nature) and cobalt content on the electrocatalytic AMF-OER performance are thoroughly investigated. Results reveal that AMF significantly boosts OER activity of Co@C-based electrodes, their enhancement being strongly dependent on the electrolyte composition. Furthermore, both the heating capacity of the herein synthesized catalyst for magnetic hyperthermia and their structural features remain intact after an intense and prolonged electrocatalytic AMF-OER experiment. No signs of sintering, leaching, or particle size increase, which are typical issues observed when metal nanoparticles are subjected to an intense external magnetic field, have been found. This underscores the high operational stability of this catalyst. These findings provide new insights into thermal AMF-assisted alkaline water oxidation for developing high-performance catalysts for enhanced electrocatalysis., Financial support by Severo Ochoa Centre of Excellence program (CEX2021-001230-S) is gratefully acknowledged. The authors thank the financial support from the Spanish Government (PID2021-126799NB-I00, PID2022-140111OB-I00, TED2021-130191B-C41, TED2021-130191B-C42, TED2021-130191B-C43 and RED2022-134120-T funded by MCIU/AEI/ 10.13039/501100011033 and European Union NextGenerationEU/PRTR). This study forms part of the Advanced Materials program and was supported by MCIN with partial funding from the European Union Next Generation EU (PRTR-C17. I1) and by Generalitat Valenciana (MFA/2022/047) and Generalitat Valenciana (CIPROM/2022/10). In addition, this work has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 101022507. This work was also funded by “Ayuda a Primeros Proyectos de Investigación (PAID-06-24).” J.L.R.-R. thanks the MCIU for his FPU PhD contract FPU21/02562. SGT thanks the Universitat Politècnica de València for her postdoctoral contract PAID-10-23. The authors thank Diamond Light Source, particularly the B18 beamline team and D. Gianolio, for their support during the XAS measurements (proposal SP40577-1). M.A.M. acknowledges Laurelin project (European Union's Horizon 2020 – Reference: 101022507) for PDRA contract at UCL., With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2021-001230-S)., Peer reviewed
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Silver hexacyanoferrate (II) nanocrystals as a new material to improve Raman scattering enhancement during silver surface oxidation

  • Hernández Muñoz, Sheila
  • Cheuquepan Valenzuela, William
  • Pérez Estébanez, Martín
  • Heras Vidaurre, Aránzazu
  • Colina Santamaría, Álvaro
Raman spectroscopy is a powerful analysis technique that shows its full potential when a high amplification of the Raman signal is achieved. In this sense, Surface-Enhanced Raman scattering (SERS) has been the most widely used phenomenon for analysis. SERS provides the amplification of the Raman intensity due to the interaction of molecules with a plasmonic nanostructured surface. The enhancement of the Raman signal can be also obtained during the electrochemical oxidation of a metal electrode; this phenomenon was denoted as Electrochemical-Surface Oxidation Enhanced Raman Scattering (EC-SOERS) and yields a good Raman signal enhancement with high reproducibility. Until now, only chloride and bromide have been employed in EC-SOERS, using a silver electrode to generate silver chloride and silver bromide nanocrystals. In this work, a new EC-SOERS substrate based on the electrogeneration of silver hexacyanoferrate (II) nanocrystals is presented which provides a very sensitive Raman response. The electrogeneration of this new material can be easily followed using spectroelectrochemistry since the characteristic Raman bands of the nanocrystals lie outside of the fingerprint region used for the analysis where the detection of most of the target molecules is performed. Indigo Carmine has been selected as target molecule, obtaining a very good response at nanomolar level under Raman resonance and non-resonance conditions., Authors acknowledge the financial support from Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033, PID2020–113154RB-C21), and Ministerio de Ciencia, Innovación y Universidades (RED2022–134120-T). S.H. thanks JCyL and European Social Fund for her postdoctoral fellowship and M.P.-E. thanks JCyL and European Social Fund for his predoctoral fellowship. W. Ch. acknowledges Junta de Castilla y León for his postdoctoral fellowship (Grant BU297P18) and funding received from European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No 101031622.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Bidimensional Spectroelectrochemistry with Tunable Thin-Layer Thickness

  • Pérez Estébanez, Martín
  • Perales Rondon, Juan Víctor
  • Hernández Muñoz, Sheila
  • Heras Vidaurre, Aránzazu
  • Colina Santamaría, Álvaro
Bidimensional spectroelectrochemistry (Bidim-SEC) is an instrumental technique that provides operando UV/vis absorption information on electrochemical processes from two different points of view, using concomitantly a parallel and a normal optical configuration. The parallel configuration provides information about chemical species present in the diffusion layer, meanwhile the normal arrangement supplies information about changes occurring both in the diffusion layer and, mainly, on the electrode surface. The choice of a suitable cell to perform Bidim-SEC experiments is critical, especially while working under a thin-layer regime. So far, most of the proposed Bidim-SEC cells rely on the use of spacers to define the thin-layer thickness, which leads to working with constant thickness values. Herein, we propose a novel Bidim-SEC cell that enables easy-to-use micrometric control of the thin-layer thickness using a piezoelectric positioner. This device can be used for the study of complex interfacial systems and also to easily measure the key parameters of an electrochemical process. As a proof of concept, the study of the roughening of a gold electrode in KCl medium is performed, identifying key steps in the passivation and nanoparticle generation on the gold surface., This work was funded by the Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033 and PID2020–113154RB-C21), Ministerio de Ciencia, Innovación y Universidades (RED2022–134120-T), and Junta de Castilla y León and European Regional Development Fund (Grant number: BU036P23).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Activating the SERS features of screen-printed electrodes with thiocyanate for sensitive and robust EC-SERS analysis

  • Moldovan, Rebeca
  • Pérez Estébanez, Martín
  • Heras Vidaurre, Aránzazu
  • Bodoki, Ede
  • Colina Santamaría, Álvaro
This study presents a novel electrochemical (EC) methodology for activating the SERS features of disposable silver screen-printed electrodes (AgSPEs) using a pseudohalide as a precipitating agent to guide the assembly of a nano-filamentous silver network responsible for a strong SERS enhancement. To the best of our knowledge, the use of thiocyanate for SPEs activation for quantitative purposes has not been reported before. In order to better study this complex system, time-resolved (TR) operando spectroelectrochemistry (SEC) measurements were performed by SERS and UV-Vis and correlated with SEM imaging of the electrode surface at different steps. Moreover, to significantly increase the reproducibility of the assays, a rapid EC protocol was proposed for the first time to obtain a reliable Ag/AgSCN reference electrode (RE) and a comprehensive optimization process was conducted to determine the critical parameters. Additionally, propranolol, as an emerging pharmaceutical pollutant has been selected as a model molecule to demonstrate the applicability of the method for rapid (3 min) quantitative analysis in the nM range from real river and tap water samples., Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033, PID2020-113154RB-C21), Ministerio de Ciencia, Innovación y Universidades (RED2022-134120-T).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Electrochemically generated CuI and CuSCN nanocrystals on Cu surfaces as Raman enhancing substrates

  • Pérez Estébanez, Martín
  • Cheuquepan Valenzuela, William
  • Heras Vidaurre, Aránzazu
  • Colina Santamaría, Álvaro
Raman enhancing strategies, such as Surface-Enhance Raman scattering (SERS), are a key piece for the development of spectroscopic and analytical strategies based on Raman spectroscopy, due to the intrinsic low sensitivity of the Raman scattering. Some years ago, our group reported an unexpected Raman enhancement process observed during the electrochemical oxidation of metallic electrodes, named Electrochemical Oxidation Surface-Enhanced Raman scattering (EC-SOERS). This Raman enhancement phenomenon was recently explained as an interaction of the analyte and the SERS dielectric substrate promoted by a metal cation. The elucidation of the origin of this enhancement is now leading to the development of new Raman enhancing substrates, such as copper-based substrates. In this work, we present an overview of the use of copper electrodes as EC-SOERS substrates. The presented strategies allow the electrosynthesis of SERS-active CuI nanocrystals on a metallic copper surface, which provides Raman enhancement for a wide number of molecules. The influence of the electrochemical conditions and the structure of the studied molecules are discussed. The use of CuSCN nanocrystals is also explored as substrates to promote Raman enhancement., Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033, PID2020-113154RB-C21), Junta de Castilla y León and European Regional Development Fund (Grant number: BU036P23), Ministerio de Ciencia, Innovación y Universidades (RED2022-134120-T) are gratefully acknowledged for funding this work. M. P.-E. acknowledges Junta de Castilla y León and European Social Found for his predoctoral contract. W. Ch. acknowledges Junta de Castilla y León for his postdoctoral fellowship (Grant BU297P18) and funding received from Marie Sklodowska-Curie postdoctoral fellowship (Grant MSCA-IF-EF-ST 2020/101031622).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

New screen-printed electrodes for Raman spectroelectrochemistry. Determination of p-aminosalicylic acid

  • Romay García, Luis
  • Núñez Marinero, Pello
  • Perales Rondon, Juan Víctor
  • Heras Vidaurre, Aránzazu
  • Campo García, Francisco Javier del
  • Colina Santamaría, Álvaro
The availability of new surface enhanced Raman scattering (SERS) substrates is essential to develop quantitative analytical methods. Electrochemistry is an easy, fast and reproducible methodology to prepare SERS substrates on screen-printed electrodes (SPEs). Results: This work proposes new SPEs based on a three-electrode system all made of silver. Using the same ink for the whole electrode system facilitates the fabrication process, reduces production costs, and leads to excellent analytical performance. The results showed that Raman enhancement depends strongly on the type of silver ink. To demonstrate the capabilities of the new electrodes developed, 4-aminosalicylic acid was determined in complex matrices and in the presence of strong interfering compounds such as salicylic acid and acetylsalicylic acid. The proposed analytical method is based on the electrochemical surface oxidation enhanced Raman scat tering (EC-SOERS) strategy. AgCl nanocrystals are generated on the working electrode surface, which amplify the Raman signal of 4-aminosalicylic acid. Good figures of merit were obtained both in the absence and in the presence of the interfering compounds, achieving a correct estimation of a 4-aminosalicylic test sample in complex matrices. Significance: The new SPEs have been demonstrated to be very sensitive and reproducible which, together to the high specificity of the Raman signal, makes this methodology very attractive for chemical analysis., Ministerio de Ciencia e Innovacion ´ and Agencia Estatal de Inves tigacion ´ (MCIN/AEI/10.13039/501100011033, PID2020-113154RBC21, PID2020-113154RB-C22), Junta de Castilla y Leon ´ and European Regional Development Fund (Grant number: BU036P23), Ministerio de Ciencia, Innovacion ´ y Universidades (RED2022-134120-T) are grate fully acknowledged for funding this work. L.R. acknowledges Ministerio de Ciencia e Innovacion ´ and Agencia Estatal de Investigacion ´ (MCIN/ AEI/10.13039/501100011033, PIS2020-113154 GB-C21) for the pre doctoral contract.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Determination of nicotine in e-liquids by electrochemical generation of surface-enhanced Raman scattering substrates

  • Romay García, Luis
  • Pérez Estébanez, Martín
  • Heras Vidaurre, Aránzazu
  • Colina Santamaría, Álvaro
Quantitative methods using surface-enhanced Raman scattering (SERS) for analysis in complex matrices are very attractive due to the high sensitivity and selectivity of this technique. In this work, a novel time-resolved elec trochemical surface-enhanced Raman scattering (TR-EC-SERS) analytical method has been developed for the determination of nicotine in e-liquids of electronic cigarettes. One of the main challenges of SERS is its inherent lack of reproducibility. Here, this limitation was mitigated by employing an electrochemical pre-treatment step to generate a homogeneous distribution of silver nanoparticles (Ag-NPs) on a silver screen-printed electrode. The enhanced Raman scattering induced by the Ag-NPs enabled the detection of nicotine at nanomolar levels. The high sensitivity of the method allowed the quantitative analysis of diluted e-liquid samples, mitigating potential interferences from other components present in these complex matrices. Moreover, TR-EC-SERS, coupled with parallel factor analysis (PARAFAC), demonstrated the capability of trilinear spectroelectrochemistry data not only to detect nicotine but also to identify potential interfering compounds without prior knowledge of their spectral signatures. This multivariate approach offers significant potential for the detection of outliers in complex samples., Ministerio de Ciencia e Innovacion ´ and Agencia Estatal de Investigacion ´ (MCIN/AEI/10.13039/501100011033, PID2020-113154RBC21, PID2023-149188OB-I00) and FEDER, UE, Junta de Castilla y Leon ´ and European Regional Development Fund (Grant number: BU036P23), Ministerio de Ciencia, Innovacion ´ y Universidades (RED2022-134120-T) are gratefully acknowledged for funding this work. L.R. acknowledges Ministerio de Ciencia e Innovacion ´ and Agencia Estatal de Investigacion ´ (MCIN/AEI/ 10.13039/ 501100011033, PIS2020-113154 GB-C21) for the predoctoral contract
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Determination of ofloxacin in urine using UV/Vis absorption spectroelectrochemistry

  • Olmo Alonso, Fabiola
  • Colina Santamaría, Álvaro
  • Heras Vidaurre, Aránzazu
UV–Vis absorption spectroelectrochemistry has been selected as a suitable multiresponse technique to determine the fluoroquinolone ofloxacin in urine samples without any previous pretreatment. Due to the modification of the working electrode surface during the oxidation of this antibiotic, the electrode has to be replaced or polished between measurements. A new spectroelectrochemistry cell has been developed, which allows in an simple way to perform reproducible experiments with different screen-printed electrodes. The new cell has been used to perform analysis in a complex matrix such as urine. Due to the trilinear character of the spectroelectrochemical data, PARAFAC has been used to determine ofloxacin with very good figures of merit, demonstrating the capability of trilinear methods to avoid the influence of some interfering compounds., Ministerio de Ciencia e Innovacion ´ and Agencia Estatal de Inves tigacion ´ (Grant numbers: MCIN/AEI/10.13039/501100011033, PID2020-113154RB-C21), Ministerio de Ciencia, Innovacion ´ y Uni versidades (Grant number: RED2022-134120-T), Junta de Castilla y Leon ´ and European Regional Development Fund (Grant number: BU036P23) are gratefully acknowledged for funding this work.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Datos de investigación Set de datos (Dataset)

Dataset of the work “Determination of ofloxacin in urine using UV/Vis absorption spectroelectrochemistry”

  • Olmo Alonso, Fabiola
  • Colina Santamaría, Álvaro
  • Heras Vidaurre, Aránzazu
UV–Vis absorption spectroelectrochemistry has been selected as a suitable multiresponse technique to determine the fluoroquinolone ofloxacin in urine samples without any previous pretreatment. Due to the modification of the working electrode surface during the oxidation of this antibiotic, the electrode has to be replaced or polished between measurements. A new spectroelectrochemistry cell has been developed, which allows in a simple way to perform reproducible experiments with different screen-printed electrodes. The new cell has been used to perform analysis in a complex matrix such as urine. Due to the trilinear character of the spectroelectrochemical data, PARAFAC has been used to determine ofloxacin with very good figures of merit, demonstrating the capability of trilinear methods to avoid the influence of some interfering compounds., Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Grant numbers: MCIN/AEI/10.13039/501100011033, PID2020-113154RB-C21), Ministerio de Ciencia, Innovación y Universidades (Grant number: RED2022-134120-T), Junta de Castilla y León and European Regional Development Fund (Grant number: BU036P23) are gratefully acknowledged for funding this work. F.O. acknowledges Junta de Castilla y León and European Social Found for his predoctoral contract.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Datos de investigación Set de datos (Dataset)

Dataset of the work “Silver hexacyanoferrate (II) nanocrystals as a new material to improve Raman scattering enhancement during silver surface oxidation”

  • Hernández Muñoz, Sheila
  • Cheuquepan Valenzuela, William
  • Pérez Estébanez, Martín
  • Heras Vidaurre, Aránzazu
  • Colina Santamaría, Álvaro
Raman spectroscopy is a powerful analysis technique that shows its full potential when a high amplification of the Raman signal is achieved. In this sense, Surface-Enhanced Raman scattering (SERS) has been the most widely used phenomenon for analysis. SERS provides the amplification of the Raman intensity due to the interaction of molecules with a plasmonic nanostructured surface. The enhancement of the Raman signal can be also obtained during the electrochemical oxidation of a metal electrode; this phenomenon was denoted as Electrochemical-Surface Oxidation Enhanced Raman Scattering (EC-SOERS) and yields a good Raman signal enhancement with high reproducibility. Until now, only chloride and bromide have been employed in EC-SOERS, using a silver electrode to generate silver chloride and silver bromide nanocrystals. In this work, a new EC-SOERS substrate based on the electrogeneration of silver hexacyanoferrate (II) nanocrystals is presented which provides a very sensitive Raman response. The electrogeneration of this new material can be easily followed using spectroelectrochemistry since the characteristic Raman bands of the nanocrystals lie outside of the fingerprint region used for the analysis where the detection of most of the target molecules is performed. Indigo Carmine has been selected as target molecule, obtaining a very good response at nanomolar level under Raman resonance and nonresonance conditions., Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier B.V. Authors acknowledge the financial support from Ministerio de Ciencia e Innovacion and Agencia Estatal de Investigacion (MCIN/AEI/10.13039/501100011033, PID2020–113154RB-C21), and Ministerio de Ciencia, Innovacion y Universidades (RED2022–134120-T). S.H. thanks JCyL and European Social Fund for her postdoctoral fellowship and M.P.-E. thanks JCyL and European Social Fund for his predoctoral fellowship. W.Ch. acknowledges Junta de Castilla y Leon for his postdoctoral fellowship (Grant BU297P18) and funding received from European Union’s Horizon 2020 research and innovation program under the Marie Sk?odowska-Curie grant agreement No 101031622.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Datos de investigación Set de datos (Dataset)

Dataset of the work “Raman, UV-Vis Absorption, and Fluorescence Spectroelectrochemistry for Studying the Enhancement of the Raman Scattering Using Nanocrystals Activated by Metal Cations”

  • Hernández Muñoz, Sheila
  • Pérez Estébanez, Martín
  • Cheuquepan Valenzuela, William
  • Perales Rondon, Juan Víctor
  • Heras Vidaurre, Aránzazu
  • Colina Santamaría, Álvaro
Raman signal enhancement is fundamental to develop different analytical tools for chemical analysis, interface reaction studies, or new materials characterization, among others. Thus, phenomena such as surface-enhanced Raman scattering (SERS) have been used for decades to increase the sensitivity of Raman spectroscopy, leading to a huge development of this field. Recently, an alternative method to SERS for the amplification of Raman signals has been reported. This method, known as electrochemical surface oxidation-enhanced Raman scattering (EC-SOERS), has been experimentally described. However, to date, it has not yet been fully understood. In this work, new experimental data that clarify the origin of the Raman enhancement in SOERS are provided. The use of a complete and unique set of combined spectroelectrochemistry techniques, including time-resolved operando UV?vis absorption, fluorescence, and Raman spectroelectrochemistry, reveals that such enhancement is related to the generation of dielectric or semiconductor nanocrystals on the surface of the electrode and that the interaction between the target molecule and the dielectric substrate is mediated by metal cations. According to these results, the interaction metal electrode?nanocrystal?metal cation?molecule is proposed as being responsible for the Raman enhancement in Ag and Cu substrates. Elucidation of the origin of the Raman enhancement will help to promote the rational design of SOERS substrates as an attractive alternative to the well-known SERS phenomenon., Open Access funding provided thanks to the CRUE-CSIC agreement with American Chemical Society (ACS). This work was funded by the Ministerio de Ciencia e Innovacio?n and Agencia Estatal de Investigacio?n (MCIN/AEI/10.13039/501100011033 and PID2020-113154RB-C21), Ministerio de Ciencia, Innovacio?n y Universidades (RED2022-134120-T). S.H. acknowledges Junta de Castilla y León and European Social Found for her postdoctoral contract. M.P.-E. acknowledges Junta de Castilla y León and European Social Found for his predoctoral contract. W.C. acknowledges Junta de Castilla y León for his postdoctoral fellowship (grant BU297P18) and funding received from the Marie Sklodowska-Curie postdoctoral fellowship (grant MSCA-IF-EF-ST 2020/101031622). J.V. P.-R. acknowledges Ministerio de Universidades and NextGenerationEU for his Maria Zambrano fellowship.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Datos de investigación Set de datos (Dataset)

Dataset of the work “Bidimensional Spectroelectrochemistry with Tunable Thin-Layer Thickness”

  • Pérez Estébanez, Martín
  • Perales Rondon, Juan Víctor
  • Hernández Muñoz, Sheila
  • Heras Vidaurre, Aránzazu
  • Colina Santamaría, Álvaro
Bidimensional spectroelectrochemistry (Bidim-SEC) is an instrumental technique that provides operando UV/vis absorption information on electrochemical processes from two different points of view, using concomitantly a parallel and a normal optical configuration. The parallel configuration provides information about chemical species present in the diffusion layer, meanwhile the normal arrangement supplies information about changes occurring both in the diffusion layer and, mainly, on the electrode surface. The choice of a suitable cell to perform Bidim-SEC experiments is critical, especially while working under a thinlayer regime. So far, most of the proposed Bidim-SEC cells rely on the use of spacers to define the thin-layer thickness, which leads to working with constant thickness values. Herein, we propose a novel Bidim-SEC cell that enables easy-to-use micrometric control of the thin-layer thickness using a piezoelectric positioner. This device can be used for the study of complex interfacial systems and also to easily measure the key parameters of an electrochemical process. As a proof of concept, the study of the roughening of a gold electrode in KCl medium is performed, identifying key steps in the passivation and nanoparticle generation on the gold surface., Open Access funding provided thanks to the CRUE-CSIC agreement with American Chemical Society (ACS). This work was funded by the Ministerio de Ciencia e Innovacio?n and Agencia Estatal de Investigacion (MCIN/AEI/10.13039/501100011033 and PID2020-113154RBC21), Ministerio de Ciencia, Innovacion y Universidades (RED2022-134120-T), and Junta de Castilla y Leon and European Regional Development Fund (Grant number: BU036P23). M.P.-E. acknowledges Junta de Castilla y León and European Social Fund for his postdoctoral contract (BU036P23). J.V.P.-R. acknowledges Ministerio de Universidades and NextGenerationEU for his Maria Zambrano Fellowship. S.H. acknowledges Junta de Castilla y León and European Social Fund for her postdoctoral contract.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Datos de investigación Set de datos (Dataset)

Dataset of the work “Electrochemically generated CuI and CuSCN nanocrystals on Cu surfaces as Raman enhancing substrates”

  • Pérez Estébanez, Martín
  • Cheuquepan Valenzuela, William
  • Heras Vidaurre, Aránzazu
  • Colina Santamaría, Álvaro
Raman enhancing strategies, such as Surface-Enhance Raman scattering (SERS), are a key piece for the development of spectroscopic and analytical strategies based on Raman spectroscopy, due to the intrinsic low sensitivity of the Raman scattering. Some years ago, our group reported an unexpected Raman enhancement process observed during the electrochemical oxidation of metallic electrodes, named Electrochemical Oxidation Surface-Enhanced Raman scattering (EC-SOERS). This Raman enhancement phenomenon was recently explained as an interaction of the analyte and the SERS dielectric substrate promoted by a metal cation. The elucidation of the origin of this enhancement is now leading to the development of new Raman enhancing substrates, such as copper-based substrates. In this work, we present an overview of the use of copper electrodes as EC-SOERS substrates. The presented strategies allow the electrosynthesis of SERS-active CuI nanocrystals on a metallic copper surface, which provides Raman enhancement for a wide number of molecules. The influence of the electrochemical conditions and the structure of the studied molecules are discussed. The use of CuSCN nanocrystals is also explored as substrates to promote Raman enhancement., Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier B.V. Ministerio de Ciencia e Innovacion and Agencia Estatal de Investigacion (MCIN/AEI/10.13039/501100011033, PID2020-113154RBC21), Junta de Castilla y Leon and European Regional Development Fund (Grant number: BU036P23), Ministerio de Ciencia, Innovacion y Universidades (RED2022-134120-T) are gratefully acknowledged for funding this work. M.P.-E. acknowledges Junta de Castilla y Leon and European Social Found for his predoctoral contract. W.Ch. acknowledges Junta de Castilla y Leon for his postdoctoral fellowship (Grant BU297P18) and funding received from Marie Sklodowska-Curie postdoctoral fellowship (Grant MSCA-IF-EF-ST 2020/101031622).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Datos de investigación Set de datos (Dataset)

Dataset of the work “Activating the SERS features of screen-printed electrodes with thiocyanate for sensitive and robust EC-SERS analysis”

  • Moldovan, Rebeca
  • Pérez Estébanez, Martín
  • Heras Vidaurre, Aránzazu
  • Bodoki, Ede
  • Colina Santamaría, Álvaro
This study presents a novel electrochemical (EC) methodology for activating the SERS features of disposable silver screen-printed electrodes (AgSPEs) using a pseudohalide as a precipitating agent to guide the assembly of a nano-filamentous silver network responsible for a strong SERS enhancement. To the best of our knowledge, the use of thiocyanate for SPEs activation for quantitative purposes has not been reported before. In order to better study this complex system, time-resolved (TR) operando spectroelectrochemistry (SEC) measurements were performed by SERS and UV-Vis and correlated with SEM imaging of the electrode surface at different steps. Moreover, to significantly increase the reproducibility of the assays, a rapid EC protocol was proposed for the first time to obtain a reliable Ag/AgSCN reference electrode (RE) and a comprehensive optimization process was conducted to determine the critical parameters. Additionally, propranolol, as an emerging pharmaceutical pollutant has been selected as a model molecule to demonstrate the applicability of the method for rapid (3 min) quantitative analysis in the nM range from real river and tap water samples., Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier B.V. Ministerio de Ciencia e Innovacion and Agencia Estatal de Investigacion (MCIN/AEI/10.13039/501100011033, PID2020-113154RBC21), Ministerio de Ciencia, Innovacion y Universidades (RED2022-134120-T). M. P.-E. acknowledges Junta de Castilla y Leon and European Social Found for his predoctoral contract.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Datos de investigación Set de datos (Dataset)

Dataset of the work “New screen-printed electrodes for Raman spectroelectrochemistry. Determination of p-aminosalicylic acid”

  • Romay García, Luis
  • Núñez Marinero, Pello
  • Perales Rondon, Juan Víctor
  • Heras Vidaurre, Aránzazu
  • Campo García, Francisco Javier del
  • Colina Santamaría, Álvaro
Background: The availability of new surface enhanced Raman scattering (SERS) substrates is essential to develop quantitative analytical methods. Electrochemistry is an easy, fast and reproducible methodology to prepare SERS substrates on screen-printed electrodes (SPEs). Results: This work proposes new SPEs based on a three-electrode system all made of silver. Using the same ink for the whole electrode system facilitates the fabrication process, reduces production costs, and leads to excellent analytical performance. The results showed that Raman enhancement depends strongly on the type of silver ink. To demonstrate the capabilities of the new electrodes developed, 4-aminosalicylic acid was determined in complex matrices and in the presence of strong interfering compounds such as salicylic acid and acetylsalicylic acid. The proposed analytical method is based on the electrochemical surface oxidation enhanced Raman scattering (EC-SOERS) strategy. AgCl nanocrystals are generated on the working electrode surface, which amplify the Raman signal of 4-aminosalicylic acid. Good figures of merit were obtained both in the absence and in the presence of the interfering compounds, achieving a correct estimation of a 4-aminosalicylic test sample in complex matrices. Significance: The new SPEs have been demonstrated to be very sensitive and reproducible which, together to the high specificity of the Raman signal, makes this methodology very attractive for chemical analysis., Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier B.V. Ministerio de Ciencia e Innovaci´on and Agencia Estatal de Investigacion (MCIN/AEI/10.13039/501100011033, PID2020-113154RB- C21, PID2020-113154RB-C22), Junta de Castilla y Leon and European Regional Development Fund (Grant number: BU036P23), Ministerio de Ciencia, Innovacion y Universidades (RED2022-134120-T) are fully acknowledged for funding this work. L.R. acknowledges Ministerio de Ciencia e Innovacion and Agencia Estatal de Investigacion (MCIN/ AEI/10.13039/501100011033, PIS2020-113154 GB-C21) for the doctoral contract. J.V. P.-R. acknowledges Ministerio de Universidades and NextGenerationEU for his Maria Zambrano fellowship.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Simultaneous UV/vis Absorption in Parallel Configuration, Photoluminescence and Raman Spectroelectrochemistry

  • Olmo Alonso, Fabiola
  • Pérez Estébanez, Martín
  • Heras Vidaurre, Aránzazu
  • Campo García, Francisco Javier del
  • Colina Santamaría, Álvaro
Technical Note, Analytical Chemistry is the science of chemical measurements that seeks to acquire the most comprehensive information about a chemical system. Recent advances in technology have facilitated the development of new combined analytical techniques capable of supplying analytical signals of different natures. These signals subsequently provide diverse information related to specific chemical reactions. This technical note proposes a new combination of three different spectroscopic techniques (UV/vis absorption spectroscopy in a parallel configuration, photoluminescence and Raman spectroscopy) with electrochemistry. To illustrate the capabilities of this new technique, two chemical systems (tris(2,2′ bipyridine)ruthenium(II) and ofloxacin) were selected. A comparison of the behavior of the two molecules during the electrode process demonstrates the advantages of obtaining several signals simultaneously in a single experiment., Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación MCIN/AEI/10.13039/501100011033 and FEDER, UE (Grant numbers: PID2020-113154RB-C21, PID2020-113154RB-C22, PID2023-149188OB-I00, RED2022-134120-T, RED2024-153970-T), Junta de Castilla y León and European Regional Development Fund (Grant number: BU036P23) are gratefully acknowledged for funding this work. F.O. acknowledges Junta de Castilla y León and the European Social Fund for her postdoctoral contract. M.P.-E. acknowledges Junta de Castilla y León and the European Social Fund for his postdoctoral contract.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Datos de investigación Set de datos (Dataset)

Dataset of the work “Simultaneous UV/vis Absorption in Parallel Configuration, Photoluminescence and Raman Spectroelectrochemistry”

  • Olmo Alonso, Fabiola
  • Pérez Estébanez, Martín
  • Heras Vidaurre, Aránzazu
  • Campo García, Francisco Javier del
  • Colina Santamaría, Álvaro
Analytical Chemistry is the science of chemical measurements that seeks to acquire the most comprehensive information about a chemical system. Recent advances in technology have facilitated the development of new combined analytical techniques capable of supplying analytical signals of different natures. These signals subsequently provide diverse information related to specific chemical reactions. This technical note proposes a new combination of three different spectroscopic techniques (UV/vis absorption spectroscopy in a parallel configuration, photoluminescence and Raman spectroscopy) with electrochemistry. To illustrate the capabilities of this new technique, two chemical systems (tris(2,2' bipyridine)ruthenium(II) and ofloxacin) were selected. A comparison of the behavior of the two molecules during the electrode process demonstrates the advantages of obtaining several signals simultaneously in a single experiment., Open Access funding provided thanks to the CRUE-CSIC agreement with American Chemical Society (ACS). Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación MCIN/AEI/10.13039/501100011033 and FEDER, UE (Grant numbers: PID2020-113154RB-C21, PID2020-113154RB-C22, PID2023-149188OB-I00, RED2022-134120-T, RED2024-153970-T), Junta de Castilla y León and European Regional Development Fund (Grant number: BU036P23) are gratefully acknowledged for funding this work. F.O. acknowledges Junta de Castilla y León and the European Social Fund for her postdoctoral contract. M.P.-E. acknowledges Junta de Castilla y León and the European Social Fund for his postdoctoral contract.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Datos de investigación Set de datos (Dataset)

Dataset of the work “Determination of nicotine in e-liquids by electrochemical generation of surface-enhanced Raman scattering substrates”

  • Romay García, Luis
  • Pérez Estébanez, Martín
  • Heras Vidaurre, Aránzazu
  • Colina Santamaría, Álvaro
Quantitative methods using surface-enhanced Raman scattering (SERS) for analysis in complex matrices are very attractive due to the high sensitivity and selectivity of this technique. In this work, a novel time-resolved electrochemical surface-enhanced Raman scattering (TR-EC-SERS) analytical method has been developed for the determination of nicotine in e-liquids of electronic cigarettes. One of the main challenges of SERS is its inherent lack of reproducibility. Here, this limitation was mitigated by employing an electrochemical pre-treatment step to generate a homogeneous distribution of silver nanoparticles (Ag-NPs) on a silver screen-printed electrode. The enhanced Raman scattering induced by the Ag-NPs enabled the detection of nicotine at nanomolar levels. The high sensitivity of the method allowed the quantitative analysis of diluted e-liquid samples, mitigating potential interferences from other components present in these complex matrices. Moreover, TR-EC-SERS, coupled with parallel factor analysis (PARAFAC), demonstrated the capability of trilinear spectroelectrochemistry data not only to detect nicotine but also to identify potential interfering compounds without prior knowledge of their spectral signatures. This multivariate approach offers significant potential for the detection of outliers in complex samples., Open Access funding provided thanks to the CRUE-CSIC agreement withElsevier B.V. Ministerio de Ciencia e Innovacion and Agencia Estatal de Investigacion (MCIN/AEI/10.13039/501100011033, PID2020-113154RB- C21, PID2023-149188OB-I00) and FEDER, UE, Junta de Castilla y Leon and European Regional Development Fund (Grant number: BU036P23), Ministerio de Ciencia, Innovacion y Universidades (RED2022-134120-T) are gratefully acknowledged for funding this work. L.R. acknowledges Ministerio de Ciencia e Innovacion and Agencia Estatal de Investigacion (MCIN/AEI/ 10.13039/ 501100011033, PIS2020-113154 GB-C21) for the predoctoral contract.
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Datos de investigación Set de datos (Dataset)

“In situ” hexagonal nanostructures surface growth from boron-carbon nanodots

  • Martínez-Periñán, Emiliano
  • Gutiérrez-Sánchez, Cristina
  • Mateo-Martí, Eva
  • Lorenzo Abad, Encarnacion
<p>Data related with the article:“In situ” hexagonal nanostructures surface growth from boron-carbon nanodots. Electrografting of boron doped carbon nanodots to generate hexagonal nanostructures over the surface of carbon electrodes and their application as electrochemical doubled layer capacitor.</p> <p>Experimental Data obtained in boron-carbon dots characterization (UV-Vis spectroscopy, FT-IR spectroscopy, dynamic light scattering, fluorescence spectroscopy), Experimental cyclic voltammetry data obtained during electrografting protocol. Charge-Discharge data obtained during capacitance test of modified electrodes.</p>
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Datos de investigación Set de datos (Dataset)

Oxygen evolution reaction electrocatalyst based on grafted cobalt and nickel doped carbon dots

  • Corrales Cristeto, Julio
  • Gutiérrez-Sánchez, Cristina
  • Mateo-Martí, Eva
  • Lorenzo Abad, Encarnacion
  • Martínez-Periñán, Emiliano
<p>Data related with the article: "Oxygen evolution reaction electrocatalyst based on grafted cobalt and nickel doped carbon dots." Electrografting of cobalt nickel doped carbon nanodots to generate nanostructures over the surface of carbon electrodes and their application as electrocatalyst for OER. </p> <p>Experimental Data obtained in cobalt nickel doped dots characterization (UV-Vis spectroscopy, FT-IR spectroscop, AFM), modified electrode Surface charaterization (AFM, XPS), Experimental cyclic voltammetry data obtained during electrografting protocol. Experimental hydrodinamic linear sweep voltammetry obtained for oxygen evolution reaction characterization.</p>