Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 78
Encontrada(s) 1 página(s)

Repositorio Digital de la UPF
Publication Contribución de congreso (ConferenceOutput)

SemEval-2016 Task 2: Interpretable semantic textual similarity

  • Agirre, Eneko
  • Gonzalez Agirre, Aitor
  • Lopez-Gazpio, Iñigo
  • Maritxalar, Montserrat
  • Rigau Claramunt, German
  • Uria, Larraitz
Comunicació presentada al 10th International Workshop on Semantic Evaluation (SemEval-2016), celebrat els dies 16 i 17 de juny de 2016 a San Diego, Califòrnia., The final goal of Interpretable Semantic Textual Similarity (iSTS) is to build systems that explain which are the differences and commonalities between two sentences. The task adds an explanatory level on top of STS, formalized as an alignment between the chunks in the two input sentences, indicating the relation and similarity score of each alignment. The task provides train and test data on three datasets: news headlines, image captions and student answers. It attracted nine teams, totaling 20 runs. All datasets and the annotation guideline are freely available., This material is based in part upon work supported a MINECO grant to the University of the Basque Country (TUNER project TIN2015-65308-C5-1-R). Aitor Gonzalez Agirre and Inigo Lopez-Gazpio are by doctoral grants from MINECO. The IXA group is funded by the Basque Government (A type Research Group).
Repositorio Digital de la UPF
Publication Contribución de congreso (ConferenceOutput)

A comparison of domain-based word polarity estimation using different word embeddings

  • García-Pablos, Aitor
  • Cuadros Oller, Montse
  • Rigau Claramunt, German
Comunicació presentada a la Tenth International Conference on Language Resources and Evaluation (LREC 2016), celebrada els dies 23 a 28 de maig de 2016 a Portorož, Eslovènia., A key point in Sentiment Analysis is to determine the polarity of the sentiment implied by a certain word or expression. In basic Sentiment Analysis systems this sentiment polarity of the words is accounted and weighted in different ways to provide a degree of positivity/negativity. Currently words are also modelled as continuous dense vectors, known as word embeddings, which seem to encode interesting semantic knowledge. With regard to Sentiment Analysis, word embeddings are used as features to more complex supervised classification systems to obtain sentiment classifiers. In this paper we compare a set of existing sentiment lexicons and sentiment lexicon generation techniques. We also show a simple but effective technique to calculate a word polarity value for each word in a domain using existing continuous word embeddings generation methods. Further, we also show that word embeddings calculated on in-domain corpus capture the polarity better than the ones calculated on general-domain corpus., This work has been supported by Vicomtech-IK4 and partially funded by TUNER project (TIN2015-65308-C5-1-R).
Repositorio Digital de la UPF
Publication Contribución de congreso (ConferenceOutput)

An adaptable lexical simplification architecture for major ibero-romance languages

  • Ferrés, Daniel
  • Saggion, Horacio
  • Gómez Guinovart, Xavier
Comunicació presentada a: EMNLP 2017, Workshop Building Linguistically Generalizable NLP Systems; celebrat el 8 de setembre de 2017 a Copenhagen, Dinamarca., Lexical Simplification is the task of reducing the lexical complexity of textual documents by replacing difficult words with easier to read (or understand) expressions while preserving the original meaning. The development of robust pipelined multilingual architectures able to adapt to new languages is of paramount importance in lexical simplification. This paper describes and evaluates a modular hybrid linguistic-statistical Lexical Simplifier that deals with the four major Ibero-Romance Languages: Spanish, Portuguese, Catalan, and Galician. The architecture of the system is the same for the four languages addressed, only the language resources used during simplification are language specific., This work is (partly) supported by the Spanish Ministry of Economy and Competitiveness under the Maria de Maeztu Units of Excellence Programme (MDM-2015-0502) and by the TUNER project (TIN2015-65308-C5-5-R and TIN2015- 65308-C5-1-R, MINECO/FEDER, UE).
Repositorio Digital de la UPF
Publication Contribución de congreso (ConferenceOutput)

A multilingual predicate matrix

  • Lopez de Lacalle, Maddalen
  • Laparra, Egoitz
  • Aldabe, Itziar
  • Rigau Claramunt, German
Comunicació presentada a la Tenth International Conference on Language Resources and Evaluation (LREC 2016), celebrada els dies 23 a 28 de maig de 2016 a Portorož, Eslovènia., This paper presents the Predicate Matrix 1.3, a lexical resource resulting from the integration of multiple sources of predicate information including FrameNet, VerbNet, PropBank and WordNet. This new version of the Predicate Matrix has been extended to cover nominal predicates by adding mappings to NomBank. Similarly, we have integrated resources in Spanish, Catalan and Basque. As a result, the Predicate Matrix 1.3 provides a multilingual lexicon to allow interoperable semantic analysis in multiple languages., This work has been partially funded by NewsReader (FP7-ICT-2011-8-316404) and TUNER (TIN2015-65308-C5-1-R) projects.
Repositorio Digital de la UPF
Publication Contribución de congreso (ConferenceOutput)

Multilingual CALL framework for automatic language exercise generation from free text

  • Perez Miguel, Naiara
  • Cuadros Oller, Montse
Comunicació presentada a la 15th Conference of the European Chapter of the Association for Computatinal Linguistics (EACL 2017), celebrada els dies 3 a 7 d'abril de 2017 a València, Espanya., This paper describes a web-based application to design and answer exercises for language learning. It is available in Basque, Spanish, English, and French. Based on open-source Natural Language Processing (NLP) technology such as word embedding models and word sense disambiguation, the system enables users to create automatically and in real time three types of exercises, namely, Fill-inthe-Gaps, Multiple Choice, and Shuffled Sentences questionnaires. These are generated from texts of the users’ own choice, so they can train their language skills with content of their particular interest., This work has been funded by the Spanish Government (project TIN2015-65308-C5-1-R).
Repositorio Digital de la UPF
Publication Contribución de congreso (ConferenceOutput)

The Event and Implied Situation Ontology (ESO): application and evaluation

  • Segers, Roxane
  • Rospocher, Marco
  • Vossen, Piek
  • Laparra, Egoitz
  • Rigau Claramunt, German
  • Minard, Anne-Lyse
Comunicació presentada a la Tenth International Conference on Language Resources and Evaluation (LREC 2016), celebrada els dies 23 a 28 de maig de 2016 a Portorož, Eslovènia., This paper presents the Event and Implied Situation Ontology (ESO), a manually constructed resource which formalizes the pre and post situations of events and the roles of the entities affected by an event. The ontology is built on top of existing resources such as WordNet, SUMO and FrameNet. The ontology is injected to the Predicate Matrix, a resource that integrates predicate and role information from amongst others FrameNet, VerbNet, PropBank, NomBank and WordNet. We illustrate how these resources are used on large document collections to detect information that otherwise would have remained implicit. The ontology is evaluated on two aspects: recall and precision based on a manually annotated corpus and secondly, on the quality of the knowledge inferred by the situation assertions in the ontology. Evaluation results on the quality of the system show that 50% of the events typed and enriched with ESO assertions are correct., The research for this paper has been partially funded by the European Union 7th Framework Programme NewsReader (FP7-ICT-2011-8-316404) and the Spanish national project TUNER (TIN2015-65308-C5-1-R).
Repositorio Digital de la UPF
Publication Contribución de congreso (ConferenceOutput)

Multilingual event detection using the NewsReader pipelines

  • Agerri, Rodrigo
  • Aldabe, Itziar
  • Laparra, Egoitz
  • Rigau Claramunt, German
  • Fokkens, Antske
  • Huijgen, Paul
  • Izquierdo Beviá, Rubén
  • van Erp, Marieke
  • Vossen, Piek
  • Minard, Anne-Lyse
  • Magnini, Bernardo
Comunicació presentada al LREC 2016 Workshop: Cross-Platform Text Mining and Natural Language Processing Interoperability, celebrat el dia 23 de maig de 2016 a Portoroz, Eslovènia., We describe a novel modular system for cross-lingual event extraction for English, Spanish, Dutch and Italian texts. The system consists of a ready-to-use modular set of advanced multilingual Natural Language Processing (NLP) tools. The pipeline integrates modules for basic NLP processing as well as more advanced tasks such as cross-lingual Named Entity Linking, Semantic Role Labeling and time normalization. Thus, our cross-lingual framework allows for the interoperable semantic interpretation of events, participants, locations and time, as well as the relations between them., This work has been partially funded by NewsReader (FP7-ICT2011-8-316404) and TUNER (TIN2015-65308-C5-1-R).
Repositorio Digital de la UPF
Publication Contribución de congreso (ConferenceOutput)

​Annotation of negation in the IULA Spanish Clinical Record Corpus

  • Marimon, Montserrat
  • Vivaldi, J. (Jorge), 1952-
  • Bel Rafecas, Núria
Comunicació presentada a SemBEaR 2017: Computational Semantics Beyond Events and Roles, celebrat el dia 4 d'abril de 2017 a València, Espanya., This paper presents the IULA Spanish Clinical Record Corpus, a corpus of 3,194 sentences extracted from anonymized clinical records and manually annotated with negation markers and their scope. The corpus was conceived as a resource to support clinical text-mining systems, but it is also a useful resource for other Natural Language Processing systems handling clinical texts: automatic encoding of clinical records, diagnosis support, term extraction, among others, as well as for the study of clinical texts. The corpus is publicly available with a CC-BY-SA 3.0 license., This work was partially supported by the project TUNER (TIN2015-65308-C5-1-R, MINECO/FEDER).
Repositorio Digital de la UPF
Publication Contribución de congreso (ConferenceOutput)

SemEval-2016 Task 1: Semantic textual similarity, monolingual and cross-lingual evaluation

  • Agirre, Eneko
  • Banea, Carmen
  • Cer, Daniel
  • Diab, Mona
  • Gonzalez Agirre, Aitor
  • Mihalcea, Rada
  • Rigau Claramunt, German
  • Wiebe, Janyce
Comunicació presentada al 10th International Workshop on Semantic Evaluation (SemEval-2016), celebrat els dies 16 i 17 de juny de 2016 a San Diego, Califòrnia., Semantic Textual Similarity (STS) seeks to measure the degree of semantic equivalence between two snippets of text. Similarity is expressed on an ordinal scale that spans from semantic equivalence to complete unrelatedness. Intermediate values capture specifically defined levels of partial similarity. While prior evaluations constrained themselves to just monolingual snippets of text, the 2016 shared task includes a pilot subtask on computing semantic similarity on cross-lingual text snippets. This year’s traditional monolingual subtask involves the evaluation of English text snippets from the following four domains: Plagiarism Detection, Post-Edited Machine Translations, Question-Answering and News Article Headlines. From the questionanswering domain, we include both questionquestion and answer-answer pairs. The cross-lingual subtask provides paired SpanishEnglish text snippets drawn from the same sources as the English data as well as independently sampled news data. The English subtask attracted 43 participating teams producing 119 system submissions, while the crosslingual Spanish-English pilot subtask attracted 10 teams resulting in 26 systems., This material is based in part upon work supported by DARPA-BAA-12-47 DEFT grant to George Washington University, by DEFT grant #12475008 to the University of Michigan, and by a MINECO grant to the University of the Basque Country (TUNER project TIN2015-65308-C5-1-R). Aitor Gonzalez Agirre is supported by a doctoral grant from MINECO (PhD grant FPU12/06243).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Accurately Modeling a Photonic NoC in a Detailed CMP Simulation Framework

  • Puche Lara, José
  • Lechago Buendía, Sergio
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
Photonic interconnects are a promising solution for the so-called communication bottleneck in current Chip Multiprocessor (CMPs) architectures. This technology presents an inherent low-latency and power consumption almost independent of communication distance, which are really desirable features in future Networks on Chip for next CMPs generations. However, since nanophotonic technology is still growing and therefore in an immature state, current simulators of detailed systems may not provide accurate models of photonic components. In this context, non-representative results are obtained when unaccurate photonic models are assumed. This paper summarizes all of the components that conform a fully operative photonic NoC and presents their current state of the art. Moreover, we evaluate a realistic photonic network that consists of two photonic rings and a token-based arbitration mechanism and compare it against a non-realistic model. In addition, both realistic and non-realistic schemes are valuated under different configurations varying the number of wavelengths that photonic waveguides employ. The experimental results show that the non-realistic NoC presents up 6× network latency deviation with respect to the accurate model. This deviation is translated into a performance deviation higher than 10% in several applications studied, which demonstrates the importance of accurate models when simulating current technologies under development like nanophotonics. Finally, a power consumption model of the realistic photonic network is presented. The results show that the overall photonic network power consumption grows with the number of wavelengths per waveguide since the number of required modulators and receivers becomes higher. In this way, the proposed realistic photonic network, which employs only two wavelengths for arbitration and destination selection tasks, increases its power consumption up to 3%, so network designs with more complex arbitration mechanisms must take into account the impact of the number of wavelengths on the power consumption., This work was supported by the Spanish Ministerio de Economía y Competitividad (MINECO) and by Plan E funds under Grant TIN2015-66972-C5-1-R and the ExaNest project, funded by the European Union’s Horizon 2020 research andinnovation programme under grant agreement No 671553.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Workload Characterization for Exascale Computing Networks

  • Duro-Gómez, José
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
[EN] Exascale computing is the next step in high performance computing provided by systems composed of millions of interconnected processing cores. In order to guide the design and implementation of such systems, multiple workload characterization studies and system performance evaluations are required. This paper provides a workload characterization study in the context of the European Project ExaNeSt, which focuses, among others, on developing the network technology required to implement future exascale systems. In this work, we characterize different ExaNeSt applications from the computer network perspective by analyzing the distribution of messages, the dynamic bandwidth consumption, and the spatial communication patterns among cores. The analysis highlights three main observations; i) message sizes are, in general, below 50 kB; ii) communication patterns are usually bursty; and iii) spatial communication among cores concentrate in hot spots for most applications. Taking into account these observations, one can conclude that in order to unclog congested network links, an exascale network must be designed to briefly support higher-than-average bandwidths in the vicinity of key network cores., This work was supported by the ExaNest project, funded by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 671553, and by the Spanish Ministerio de Econom´ıa y Competitividad (MINECO) and Plan E funds under Grant TIN2015-66972-C5-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Improving System Turnaround Time with Intel CAT by Identifying LLC Critical Applications

  • Pons-Escat, Lucía|||0000-0002-4582-7744
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Pons Terol, Julio|||0000-0002-5654-6753
  • Selfa, Vicent
[EN] Resource sharing is a major concern in current multicore processors. Among the shared system resources, the Last Level Cache (LLC) is one of the most critical, since destructive interference between applications accessing it implies more off-chip accesses to main memory, which incur long latencies that can severely impact the overall system performance. To help alleviate this issue, current processors implement huge LLCs, but even so, inter-application interference can harm the performance of a subset of the running applications when executing multiprogram workloads. For this reason, recent Intel processors feature Cache Allocation Technologies (CAT) to partition the cache and assign subsets of cache ways to groups of applications. This paper proposes the Critical-Aware (CA) LLC partitioning approach, which leverages CAT and improves the performance of multiprogram workloads, by identifying and protecting the applications whose performance is more damaged by LLC sharing. Experimental results show that CA improves turnaround time on average by 15%, and up to 40% compared to a baseline system without partitioning., This work was supported by the Spanish Ministerio de Economia y Competitividad (MINECO) and Plan E funds, under grants TIN2015-66972-C5-1-R and TIN2017-92139-EXP. It was also supported by the ExaNest project, with funds from the European Union Horizon 2020 project, with grant agreement No 671553.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Caracterización de Cargas para Redes de Computación Exascale

  • Duro-Gómez, José
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
[ES] La computación exascale es el siguiente paso en la computación de alto rendimiento proporcionada por sistemas compuestos por millones de núcleos de procesamiento interconectados. Para guiar el diseño e implementación de dichos sistemas, se requieren múltiples estudios de caracterización de carga de trabajo y evaluaciones del sistema. Este documento proporciona un estudio de caracterización de la carga de trabajo en el contexto del proyecto europeo ExaNeSt, que se centra, entre otros, en el desarrollo de la tecnologı́a de red necesaria para implementar futuros sistemas de exascale. En este trabajo, caracterizamos diferentes aplicaciones ExaNeSt desde la perspectiva de la red informática mediante el análisis de la distribución de mensajes por tamaño, el consumo de ancho de banda a lo largo de la ejecución y los patrones espaciales de comunicación entre los núcleos. El análisis destaca tres observaciones principales; i) los tamaños de los mensajes son, en general, inferiores a 50 kB; ii) los patrones de comunicación suelen ser de ráfaga; y iii) la comunicación espacial entre los núcleos se concentra en los puntos crı́ticos para la mayorı́a de las aplicaciones. Tomando en cuenta estas observaciones, uno puede concluir que para desbloquear enlaces de red congestionados, una red exascale debe diseñarse para soportar brevemente anchos de banda superiores a la media en las proximidaes de los núcleos claves de la red., Este trabajo fue apoyado por el proyecto ExaNest, financiado por el programa de investigación e innovación Horizon 2020 de la Unión Europea bajo el acuerdo de subvención No. 671553, y por el Ministerio de Economía y Competitividad (MINECO) y fondos del Plan E bajo Grant TIN2015-66972-C5-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Modelado de una Red Fotónica para Computación Exascale

  • Duro Gómez, José
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
La mayoría de las investigaciones actuales se realizan en simuladores desarrollados para redes eléctricas, cuyos componentes difieren mucho de los componentes fotónicos. Además, la tecnología fotónica añade nuevos componentes que no están presentes en las redes eléctricas. Este artículo discute cómo se puede construir una herramienta de simulación de redes fotónicas a partir de un simulador de redes eléctricas. Se resume y compara el comportamiento de ambas tecnologías –eléctrica y fotónica– y se discuten las extensiones propuestas. Entre otros aspectos, las extensiones propuestas modelan routers ópticos, wavelength-division multiplexing, conmutación de circuitos y algoritmos de encaminamiento., Este trabajo ha sido apoyado por el proyecto ExaNest, financiado por el programa de investigación e innovación Horizon 2020 de la Unión Europea bajo el acuerdo de subvención no 671553, y los fondos del Ministerio de Economía y Competitividad (MINECO) y el Plan E bajo la subvención TIN2015-66972-C5-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Modeling a Photonic Network for Exascale Computing

  • Duro Gómez, José
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
Photonics technology has become a promising and viable alternative for both on-chip and off-chip computer networks of future Exascale systems. Nevertheless, this technology is not mature enough yet in this context, so research efforts focusing on photonic networks are still required to achieve realistic suitable network implementations. In this context, system-level photonic network simulators can help to guide designers to assess the multiple design choices. Most current research is done on electrical network simulators, whose components work widely different from photonics components. Moreover, photonics technology adds new components that are not present in electrical networks. This paper discusses how a photonics simulation tool can be built by extending an electrical simulation framework. We summarize and compare the working behavior of both technologies -electrical and photonics, and discuss the rationale behind the proposed extensions. Among others, the devised extensions model optical routers, wavelength-division multiplexing, circuit switching, and specific routing algorithms. This work is aimed to provide support to investigate off- chip optical networks in the context of the European Exascale System Interconnect and Storage project (ExaNeSt) project. The experiments presented in this paper study multiple realistic photonic networks configurations and have been performed with excerpts of real traces. Experimental results show that, compared to electrical networks, optical networks can reduce the execution time of the workload by several orders of magnitude. Our study reveals that future optical technologies presenting a 3.2 Tbps aggregate link bandwidth will not provide additional performance benefits over state-of-the-art 1.6 Tbps optical links across the studied workloads, but 1.6 Tbps network links are enough to achieve the highest optical performance on computer networks. Regarding the link configuration, the bandwidth per optical channel is the parameter with highest impact on the network delay and so on the execution time, while for a given optical bandwidth per channel the better strategy is to reduce the phit size., This work was supported by the ExaNest project, funded by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 671553, and by the Spanish Ministerio de Economía y Competitividad (MINECO) and Plan E funds under Grant TIN2015-66972-C5-1-R.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Phase change material selection for two innovative compact energy storage systems in residential buildings

  • Zsembinszki, Gabriel
  • Gasia, Jaume
  • Oró Prim, Eduard
  • Cabeza, Luisa F.
Within the framework of HYBUILD, an EU Horizon 2020-funded project, two innovative compact hybrid electrical/thermal storage systems for stand-alone and district connected residential buildings will be developed and tested in three demos located in Spain, France, and Cyprus. One of the innovative systems is aimed to be placed in buildings located in Mediterranean climate regions, where cooling loads are dominant, while the other system is intended for Continental climate regions, where the heating demand is dominant. Each system will include, among others components such as a sorption storage system and domestic hot water tanks, a latent thermal energy storage (LTES) system that will be connected to a heat pump through an innovative heat exchanger made of aluminium and filled with phase change material (PCM). In both cases, the heat pump works with electricity provided by a photovoltaic system that is, at the same time, connected to an electrical storage battery. The aim of using the LTES system is to enhance the use of solar energy, which will be translated into a reduction of the building energy consumption and related costs. This study focuses on the selection of the most suitable PCM to be used in each system. On the one hand, the LTES system of the Mediterranean system will be used to store cold to reduce the cooling demand. Taking into account that, according to the design parameters, the heat pump will require a refrigerant evaporation temperature around 2 ºC, and the building cooling system will require water supply in the range from 7 ºC to 12 ºC, the PCM melting temperature range should be within 0 ºC and 7 ºC. On the other hand, the LTES system of the Continental system will be used to store heat to reduce the domestic hot water (DHW) demand. The LTES will be located at the compressor outlet and will be charged by the hot refrigerant that exits the compressor at temperatures as high as 120 ºC. During the discharge process, the heat stored in the LTES will be supplied to the DHW at a temperature in the range between 50 ºC to 55 ºC. As a consequence, the range for the PCM melting temperature investigated in this case should be between 62 ºC and 68 ºC. Besides the melting temperature, other selection criteria considered include the PCM melting enthalpy and melting range, maximum allowed working temperature, density, thermal conductivity, availability, cost, and compatibility with aluminium. To decide the ideal PCM candidate for each system, a decision matrix was defined and used, by applying a weighted score to the selection criteria items according to their importance. The preliminary results indicate that for the Mediterranean system the best candidate is the commercial savE OM3 PCM, while for the Continental system, another commercial product PureTemp 63 is the most adequate option., This work was partially funded by the Ministerio de Economía y Competitividad de España (ENE2015- 64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (GREiA 2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Jaume Gasia would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2018 FI_B2 00100). This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD)
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Example of an Innovative Initiative for Education in Thermal Energy Storage: INPATH-TES Project

  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
Following the EC SET-Plan Education and Training Roadmap, the goal of INPATH-TES is to create a network of academia, research institutes and small and medium-sized enterprises (SMEs) to implement a joint PhD programme on Thermal Energy Storage (TES) technologies. The project consortium consists of 22 partners from academia, industry and SMEs from 14 different countries. The final result of such a network is to educate professionals on these technologies for the European research and industry institutions. Some of the main challenges identified so far consist of the development of the programme, the implementation of the programme in each country/institution, and to ensure the continuity of the programme after EU funding ends., The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº 657466 (INPATH-TES). The work is partially funded by the Spanish government ENE2015-64117-C5-1-R (MINECO/FEDER).
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Corrosion inhibitors for TES material at high temperature for CSP plants

  • Fernández, Ángel G.
  • Cabeza, Luisa F.
Molten salt technology using nitrate salts as thermal energy storage material is the current state-of-the-art of concentrated solar power technology and power tower central receivers are currently limited by the maximum operating temperature of their working fluid. The limit of solar salt (60wt.%NaNO3 + 40wt.%KNO3) thermal stability is around 565°C with ambient air as the cover gas. In order to obtain higher efficiency goals using molten salt technologies working at higher temperatures (e.g., 650°C to 750°C), a different salt chemistry is required for new generation of CSP plants and chlorides molten salts could be a feasible option. Corrosion mitigation could solve the current issues related with the use of chloride salt at high temperature. In this work, the proposal of different corrosion mitigation strategies has been evaluated, as well as the identification of the most corrosive impurities present in the ternary chloride salt composed by MgCl2/KCl/NaCl (60/20/20 mol%). For this purpose, electrochemical impedance spectroscopy tests were carried out at 700°C on austenitic stainless steel (AISI 304) and a Ni base alloy (Inconel 702) during 100 hours. In this case, MgOHCl was identified as the main important corrosive impurity, present in the chloride salt, to control in the storage system. Regarding the materials tested, Ni base alloy (Inconel 702) showed the most promising results for their use as container material., The research leading to these results has received funding from Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. Angel G. Fernández wants to acknowledge the financial support from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant No 712949 (TECNIOspring PLUS) and from the Agency for Business Competitiveness of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Benchmarking of energy demand of domestic and small business buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Rapid expansion of solar thermal energy for increasing energy efficiency of buildings has been adopted in short/medium and long-term energy strategies of EU countries. This enhancement of energy efficiency in buildings is in line with regional actions with the European climate energy objectives as defined in the European Union’s “20-20-20” targets and in the European Commission’s Energy Roadmap 2050. Within this context, the overall objective of this work is to develop an innovative high performance and cost effective hybrid solar heat and power system, which consist in a novel flat Fresnel mirror solar concentrating collector and micro organic Rankine cycle plant combined with advanced phase change materials as thermal storage, all system managed by smart control units. The initial application is to be implemented in individual dwellings and small business residential buildings for on-site electricity and heat generation using solar thermal energy. It is estimated that the proposed technology will deliver 60% of domestic energy requirements and provide 20% reduction in energy costs and greenhouse gas emissions compared to the best existing low carbon energy technologies. To reach the main objectives, the first step consist in providing information on features of architecture of domestic and small business residential buildings and their annual energy demands for different countries such as: Spain, France Germany, Italy, and United Kingdom. This will include detailed building information of envelopes (walls, roof, lofts, etc.), structure, fabric, and results of energy demands (domestic hot water, space heating and electricity) for the abovementioned countries. This information will be used as input data during the development of this technology as it will point out the potential benefits of the system in different countries, climates, and building typologies., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar) and Nº 657466 (INPATH-TES), from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE). The work is partially funded by the Spanish government ENE2015- 64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-3-R (MINECO/FEDER) and (ULLE10-4E-1305). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Comparative analysis of energy demand and CO2 emissions of residential buildings, Benchmarking of energy demand and CO2 emissions of domestic residential buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Rapid expansion of solar thermal energy for increasing energy efficiency of buildings has been adopted in short/medium and long-term energy strategies of EU countries. Within this context, the overall objective of this work is to develop an innovative high performance and cost effective hybrid solar heat and power system. The initial application is to be implemented in individual dwellings and small business residential buildings for onsite electricity and heat generation using solar thermal energy. It is estimated that the proposed technology will deliver 60% of domestic energy requirements and provide 20% reduction in energy costs and greenhouse gas emissions compared to the best existing low carbon energy technologies. The aim of this study consists in performing a comparative analysis of the different building typologies, which can host this technology, and their energy demands for heating and domestic hot water, as well as their CO2 emissions., This study has received funding from Eurepean Union's Horizon 2020 research and innovation programme under grant agreement Nº 723596 (Innova MicroSolar) and Nº 657466 (INPATH-TES). The work is partially funded by the Sapnish government ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER). GREA is certified agent TECNIO in the cathegory of technology developers from the Government of Catalonia. The authors would like to thanks the Calatan Governmnet for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thanks Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Benchmarking of energy demand of residential buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Solar thermal energy has been adopted in medium and long‐term energy strategies within EU countries for increasing the energy efficiency of buildings. In this context, the overall objective of this project consists in developing an innovative high performance and cost effective hybrid system (solar heat and electrical power). The initial application is to be implemented in residential buildings for on‐site electricity and heat generation using solar thermal energy. The proposed technology is expected to deliver 60% of domestic energy requirements (heating and domestic hot water) and provide 20% reduction in energy costs and greenhouse gas emissions compared to the best existing low carbon energy technologies. A benchmark on the energy demand for the different types of residential buildings in Europe serves as reference scenario to evaluate the potential applicability of the different existing renewable technologies and to establish a comparative framework in terms of quantitative values. Thus, the specific aim of this study consists in performing a state‐of‐the‐art on the different building typologies, which can host this technology, and their energy demands for heating and domestic hot water, as well as their associated CO2 emissions., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar) and Nº 657466 (INPATH‐TES). The work is partially funded by the Spanish government ENE2015‐64117‐ C5‐1‐R (MINECO/FEDER) and ENE2015‐64117‐C5‐3‐R (MINECO/FEDER). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI‐2014‐19940.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Innovative concentrated solar micro organic Rankine cycle plant system for residential buildings

  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Mahkamov, Khamid
  • Costa, Carolina
  • Kenisarin, Murat
  • Pili, Piero
  • Manca, Roberto
  • Leroux, Arthur
  • Mintsa, André Charles
  • Bartolini, Carlo M.
  • Pirro, Matteo
  • Lynn, Kevin
  • Mullen, David
  • Halimic, Elvedin
  • Cioccolanti, Luca
  • Arteconi, Alessia
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Reducing the energy consumption in the building sector, as well as its associated CO2 emissions, is one of the main environmental concerns at worldwide level. In developed countries, the building sector means 41% of the total energy consumption and 40% of the total greenhouse gases emissions. To improve the energy efficiency of residential buildings, several energy strategies were carried out in European countries to encourage the development of active energy saving systems; such as the solar thermal energy. The presented study is in the frame of the Innova MicroSolar European project, which is sponsored by the European Union’s Horizon 2020 research and innovation programme. The main goal of this project is to develop an innovative concentrated solar heat and power system for residential buildings, which supplies 2-kWelec and 18-kWth. This technology includes a concentrated solar system, a high performance micro organic Rankine cycle (ORC) turbine, and an enhanced latent heat thermal energy storage (LHTES). The solar system is based on linear Fresnel mirrors which are considerably easier and cheaper to manufacture than their parabolic equals. Also, the mirrors are led by a sun tracking mechanism so they are always focusing the absorber tubes, heating up to 295ºC the heat transfer fluid (HTF) flow. The total area of the real scale prototype solar field is 140 square metres, which could provide from 80 to 15 kWth. The micro ORC technology is equipped with a high speed permanent magnet AC alternator able to supply 2.3 kWel. The ORC block has to be fed with 22 kWth. Finally, the TES tank consists of two main blocks, the PCM tank and the enhanced heat sink. Both blocks are connected between them by reversible heat pipes as heat carrier. The storage is designed to supply 25 kWth during four working hours. The whole system will supply 60% of the total building energy demand, reducing the energy cost up to 20%, as well as the greenhouse gases emissions when comparing against the best renewable energy technologies available on the market. This study shows the first experiments of the whole systems. The HTF (Therminol 62) is heated up to 270ºC with the solar field, then the HTF is lead to the ORC evaporator and the organic fluid (cyclopenthane) evaporates and runs the turbine. The TES tank is charged when the solar field reaches maximum power levels. Once the solar production cannot run the ORC, the solar field is bypassed and the TES tank successfully becomes the main energy supplier., The research leading to these results has received funding from the European Union´s Horizon 2020 Research & Innovation Programme under Grant Agreement 723596 with reference name Innova MicroSolar. This work was partially funded by Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). José Miguel Maldonado would like to thank the Spanish Government for his research fellowship (BES-2016-076554). Alvaro de Gracia has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 712949 (TECNIOspring PLUS) and from the Agency for Business Competitiveness of the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Benchmarking of energy demand of domestic and small business buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
In Europe the building sector represents 41% of the final energy consumption and the 40% of the total GHG emissions of end-use sectors (Directive 2010/31/EU) [1]. Solar energy is one of the forms of renewable energy that has great potential to enable EU the ambition of 12% of heating coming from renewable sources by 2020 [2]. Within this context, the overall objective of the project Innovative Micro Solar Heat and Power System (Innova MicroSolar) is to develop a high performance and cost effective solar heat and power system, which consist in a novel flat Fresnel mirror solar concentrating collector and micro organic Rankine cycle plant combined with advanced phase change materials as thermal storage, all system managed by smart control units. This technology will be initially implemented in individual dwellings and small business residential buildings for on-site electricity and heat generation using solar thermal energy., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar) and Nº 657466 (INPATHTES), from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015- 64117-C5-3-R (MINECO/FEDER)). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Optimization of coupled building roof solar reflectance and thermal insulation level for annual energy saving under different climate zones

  • Piselli, Cristina
  • Pisello, Anna Laura
  • Gracia Cuesta, Alvaro de
  • Saffari Tabalvandani, Mohammad
  • Cotana, Franco
  • Cabeza, Luisa F.
The aim of this work is to assess building energy performance optimization potential of cool roof solutions in different climate conditions worldwide through dynamic thermal-energy simulation and optimization analysis. Moreover, given the dependence of roof performance on insulation level, the influence of roof insulation variation on optimum roof solar reflectance is evaluated. Therefore, the multi-dimensional optimization of combined building roof solar reflectance capability and thermal insulation level is carried out to minimize annual energy consumption for air-conditioning of standard ASHRAE building model for small offices, in each considered climate zone. Findings of this research highlight how the classic approach of super-insulated buildings for energy saving needs to be reframed for the office case, by integrating other passive solutions for truly environmentally friendly and comfortable buildings., The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement N°657466 (INPATH-TES). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER)). The authors from the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Anna Laura Pisello’s acknowledgments are due to the UNESCO Chair “Water Resources Management and Culture”, for supporting her research. Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Repositori Obert UdL
Publication Contribución de congreso (ConferenceOutput)

Ensayos preliminares de una microturbina de ciclo orgánico de Rankine alimentada por un campo solar de concentración tipo Fresnel lineala

  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Mahkamov, Khamid
  • Costa, Carolina
  • Kenisarin, Murat
  • Pili, Piero
  • Manca, Roberto
  • Leroux, Arthur
  • Mintsa, André Charles
  • Bartolini, Carlo M.
  • Pirro, Matteo
  • Lynn, Kevin
  • Mullen, David
  • Halimic, Elvedin
  • Cabeza, Luisa F.
El propósito de esta investigación es evaluar la influencia del tipo de cemento en sí mismo a altas temperaturas, desestimando el resto de componentes del hormigón. El presente estudio se centra en la comparación del tratamiento de dos tipos de cemento, a saber, cemento Portland (OPC) y cemento aluminoso (cemento de aluminato de calcio, CAC). Se determina las características físicas y resistencias mecánicas a compresión. A pesar de la resistencia a altas temperaturas del CAC y la baja relación agua/cemento (a/c) utilizada, este tipo de pasta de cemento requiere de un curado inminente. Si tal hidratación no se ejecuta en sus primeras edades, la pasta de CAC muestra un comportamiento similar a la pasta de OPC, desaprovechando tanto sus características refractarias como sus altas resistencias mecánicas iniciales., The purpose of this investigation is to evaluate the influence of cement type itself, at high temperatures, disregarding the rest of the concrete components. The present study focuses on the treatment comparison of two cement types, known as, ordinary Portland cement (OPC) and calcium aluminate cement (CAC). The physical characteristics and compressive strength are determined. Despite the resistance to high temperatures of the CAC and the low water/cement (w/c) ratio used, this type of cement paste requires an imminent cure at certain temperature. If such hydration is not carried out in its early ages, the CAC paste shows a behavior similar to OPC paste, wasting both its refractory characteristics and its high initial mechanical resistances., Este trabajo ha sido parcialmente financiado el programa de Investigación y Desarrollo H2020 de la Unión Europea, a través del Grant Agreement 723596, cuyo nombre de referencia es Innova MicroSolar. Este trabajo ha sido cofinanciado por el Ministerio de Economía y Competitividad de España (ENE2015-64117-C5-1-R (MINECO/FEDER) y ENE2015-64117-C5-3-R (MINECO/FEDER)). Los autores quieren agradecer al Gobierno de Cataluña por la acreditación de calidad otorgada a su grupo de investigación (2017 SGR 1537). GREA es un agente TECNIO certificado en la categoría de desarrolladores tecnológicos por el Gobierno de Cataluña. José Miguel Maldonado agradece al Gobierno de España la concesión de la ayuda para contratos predoctorales para la formación de doctores (BES-2016-076554). Alvaro de Gracia agradece los fondos recibidos del programa de Investigación y Desarrollo H2020 de la Unión Europea, a través del Marie Sklodowska-Curie Grant Agreement No 712949.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Estudio de la evolución microestructural de un acero ferrítico ODS de grupo 4 (Y-Al-Ti-Zr) consolidado por consolidación Spark Plasma Sintering (SPS)

  • Macía, Eric
  • Cornide, J.
  • García-Junceda, Andrea
  • Díaz, Luis A.
  • Campos, Mónica
Trabajo presentado al VI Congreso Nacional de Pulvimetalurgia y I Congreso Iberoamericano de Pulvimetalurgia, celebrado en Ciudad Real (España) del 7 al 9 de Junio de 2017., [ES]: Los aceros ferríticos ODS son extraordinarios candidatos para su uso en los nuevos reactores nucleares de tipo IV debido a su buen comportamiento a fluencia y bajo irradiación. El uso de elementos de aleaciones como el Ti, Al, Y favorecen la aparición de nanoclusters y nanoprecipitados que limitan el movimiento de dislocaciones, endureciéndolos y mejorando así su comportamiento a fluencia. Con la incorporación del Zr se pretende mejorar la estabilidad térmica de los óxidos precipitados y con ello la temperatura de trabajo. En este caso, el acero ferrítico ODS se ha desarrollado por molienda mecánica de alta energía. Este método proporciona estructuras cristalinas con una gran cantidad de energía almacenada que, al encontrarse heterogéneamente distribuida, produce una recristalización no homogénea durante la etapa de consolidación. La microestructura final obtenida por consiguiente, presenta un tamaño de grano heterogéneo. Con el fin de estudiar este fenómeno, se consolidaron las piezas por SPS haciendo uso de distintas condiciones de consolidación. Se seleccionó una temperatura de sinterización, 1373 K y distintas velocidades de calentamiento (de 100 a 600 °C/min). La estructura obtenida se ha caracterizado mediante difracción de rayos x y microscopía electrónica. Además, con el fin de analizar las propiedades mecánicas del material, se han llevado a cabo ensayos de dureza Vickers y de tracción en probetas subdimensionadas a temperatura ambiente., [EN]: Oxide Dispersion Strengthened (ODS) ferritic Steels are extraordinary candidates for nuclear applications due to their good behavior at high temperature and under irradiation conditions .ODS ferritic steel was produced by mechanical alloying and SPS to obtain a complex nanostructure. A four group elements (Y-Ti-Al-Zr) was selected to improve the stability of the precipitates since they are the main responsible for the thermal stability of fine structure. The heterogeneous distribution of stored energy due to the high energy attrition of MA powder will produce an inhomogeneous recrystallization during the consolidation step. After SPS consolidation a heterogeneous grain size distribution was attained, as recrystallization depends on the plastic deformation degree, on the composition of each particle and on the oxide dispersion promoted. Therefore sintering cycle was performed at 1373 K following fast heating rates (from 100 to 600 °C/min) to minimize porosity. The final microstructures were characterized by XRD and electron microscopy (SEM and TEM). In addition, Vickers microhardness and tensile tests was performed to analyze the mechanical response at R.T., La financiación obtenida por el proyecto MAT2013-47460-C5-S-P ha posibilitado esta investigación., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Tuning aggregation and charge transfer of poly(3-hexylthiopene) nanoparticles by graphene oxide

  • Istif, Emin
  • Hernández-Ferrer, Javier
  • Urriolabeitia, Esteban P.
  • Stergiou, Anastasios
  • Tagmatarchis, Nikos
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen del trabajo presentado a la International Conference on Carbon Nanoscience and Nanotechnology (NanoteC), celebrada en Nantes (Francia) del 30 de agosto al 2 de septiembre de 2017., Nanoparticles derived from conjugated polymers have attracted widespread attention for a number of reasons such as their easy synthesis, tuneable properties, less toxicity and environmentally friendly processing conditions for device fabrication. Besides, their properties can be enhanced by preparing composites with carbon nanomaterials. Poly-3-hexyl thiophene (P3HT), the archetype of conducting polymers, is characterized by the presence of quasi-crystalline domains (i.e. H, J or H-J aggregates) defining the electro-optical properties. However, reliable control of these nanoscale aggregates plays an essential role to tune charge transport and charge separation properties. In this work, we report the self-assembly of novel conjugated polymer nanoparticle/graphene oxide (P3HTNPs/GO) composites using a re-precipitation technique. The resulting composites are stable in aqueous dispersions and can be processed directly instead of usual hazardous chlorinated solvents. Photophysical studies reveals that the internal aggregate structure of the P3HTNPs is affected by GO and can be tuned by varying the amount of GO. Meanwhile, Raman spectroscopy and cyclic voltammetry reveal that the observed changes in the P3HTNP aggregate structure of the P3HTNPs/GO composite are accompanied by a charge transfer process taking place at the interface between P3HTNPs and the GO sheets. Our synthesis approach leading to novel P3HTNPs/GO composites with tuneable electro-optical properties and environmental-friendly processing characteristics thus may provide a base for the development of further functional nanomaterials for variety of applications for photovoltaic or sensing applications., EU H2020 MSC ITN 642742. MINECO (ENE2016-79282-C5-1-R). DGA-T66-GCNN., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Novel materials for optoelectronic devices: Conjugated polymer nanoparticle-graphene oxide charge-transfer complexes

  • Maser, Wolfgang K.
  • Istif, Emin
  • Hernández-Ferrer, Javier
  • Urriolabeitia, Esteban P.
  • Stergiou, Anastasios
  • Tagmatarchis, Nikos
  • Fratta, Giuseppe
  • Colchero, J.
  • Palacios-Lidón, E.
  • Kalbáč, Martin
  • Large, Matthew J.
  • Dalton, Alan B.
  • Benito, Ana M.
Resumen del trabajo presentado al Nano Application Workshop, celebrado en Munich (Alemania) del 19 al 21 de septiembre de 2018., Conjugated polymers (CPs) constitute the base of organic thin film optoelectronic devices, such as organic photovoltaic solar cells (OSCs) and organic light emitting devices (OLEDs). Deposited onto large areas of any shape they critically contribute to the development of self-powered, smart and ubiquitous communication platforms. Operational performance and fabrication from 'green' solutions compatible with large-area coating or printing technologies are key requirements for their commercial implementation. Applying self-assembly strategies, CPs can be prepared in the form of water dispersible nanoparticles being of actual interest for achieving improved device performance. In this work we present novel pathways for the design of improved organic thin film optoelectronic devices by marrying nanoparticles of CPs (CPNPs) with 2D sheets of graphene oxide (GO). Using poly(3-hexylthiophene) (P3HT) as benchmark CP, we demonstrate the game-changing role of GO in tuning the excitonic aggregate behavior of P3HTNPs and the efficient formation P3HTNPs-GO charge-transfer complexes. Thin films thereof reveal improved separation of photo-generated charge carriers. Integration into a photoelectrochemical device shows significantly improved photoactivity. Moreover, the thin films reveal unique molecular switching behavior. The possibility to overcome external performance limitations and to employ 'green' processing technologies offers exciting possibilities for further progress in the field of organic thin film optoelectronic devices., EU Horizon 2020 Marie Sklodowska-Curie grant 642742 ("Enabling Excellence"), Spanish Ministry MINEICO (ENE2016-79282-C5-1-R), Government of Aragón (Recognized Group DGA-T03-17R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Carbon dots on TiO2 for perovskite photovoltaics, methanol oxidation and water splitting

  • Ansón-Casaos, Alejandro
  • Vallan, Lorenzo
  • Hernández-Ferrer, Javier
  • Xie, Haibing
  • Lira-Cantú, Mónica
  • Benito, Ana M.
  • Maser, Wolfgang K.
Talk delivered in 7th International conference on Advanced Hydrogen Energy, ANM conference series 2019, at University of Aveiro, in Aveiro, Portugal, 17-19 July 2019.- 1 Figura, Carbon dots (CDs) are a class of fluorescent nanoparticles including an extremely rich variety of structures and functional groups. Interestingly, not only the physicochemical properties are affected by the nature of the CD structure, but also their optical behavior. Fluorescence in CDs shows particular characteristics of strong intensity and wavelengths in the visible region. Consequently, an interesting issue arises on how structurally-different CDs modify the electron transport and photoactivity of semiconductor oxides, in particular TiO2., This work has been funded by the MINECO and the European Regional Development Fund (ENE 2016-79282-C5-1-R), the Government of Aragón (T03-17R and E14-17R), and the European Commission (H2020-MSCA-ITN-2014-ETN 642742 “Enabling Excellence”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

CO2 reduction to CH4 using Ru on carbon nanostructures and on alumina coated monoliths, CO2 reduction to CH4 using carbon nanostructures and alumina coated monoliths as metal catalyst support

  • Bustinza, Ainhoa
  • Roldán, Laura
  • García-Bordejé, José Enrique
Poster presented at the 14th EuropaCat-European Congress on Catalysis (EuropaCat 2019), 8-23 August 2019 in Aachen, Germany., Herein, we have supported Ru nanoparticles on carbon nanotubes (CNTs), carbon nanofibers (CNFs) and nitrogen-doped carbon nanofibers (N-CNF). The 5% Ru catalysts supported on CNF and N-CNF have been benchmarked against 5% Ru on CNT and on conventional alumina support (Ru/Al2O3). To study the structure-performance relationship, the catalysts have been exhaustively characterized by TEM and by transient techniques such as temperature programmed desorption (TPD) and temperature programmed surface reaction (TPSR). In a second part, cordierite monoliths have been washcoated with alumina. Subsequenly, Ni, Ru and bimetallic catalyst have been impregnated and tested in reaction., The authors are indebted to the funding of European Commission (FREECATS project, grant agreement No. 280658), Financial support from Spanish Ministry MINECO (project ENE2016-79282-C5-1-R), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Reconfigurable accelerator on FPGA for scientific computing: from a space-borne instrument to a high-performance computing data center: work-in-progress

  • Cobos Carrascosa, Juan Pedro
  • Hernández Expósito, David
  • Ramos Más, José Luis
  • Aparicio del Moral, Beatriz
  • Sánchez Gómez, A.
  • Balaguer Jiménez, M.
  • López Jiménez, A. C.
  • Orozco Suárez, David
  • Toro, José Carlos del
We present a scientific computing accelerator on FPGA that uses hundreds of processors working in parallel organized in several SIMD cores. The accelerator is installed within an Ethernet network and acts as a high-performance computing server. A prototype is presented for processing solar images and achieves a great performance that can compete with a cluster. © 2019 Copyright is held by the owner/author(s). Publication rights licensed to ACM., This work has been partially funded by the Spanish Ministerio de Ciencia, Innovación y Universidades, through Projects No.ESP2016-77548-C5-1-R and RTI2018-096886-B-C51, including a percentage from European FEDER funds. Authors also acknowledge financial support from the State Agency for Research of the Spanish MCIU through the >Center of Excellence Severo Ochoa> award to the Instituto de Astrofísica de Andalucía (SEV-2017-0709)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Reduced graphene oxide aerogels with adjustable porosity as mesostructured support for catalysts and electrocatalysts

  • Carrera Jiménez, Clara
  • Hernández-Ferrer, Javier
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
The translation of the properties of graphene to 3-D structures is of a great interest for catalysis, electrocatalysis and energy storage. However, graphene is prone to stacking to by van der Waals forces losing its properties and surface area Graphene aerogels can circumvent the stacking problem keeping interesting properties such as high surface area, open macroporosity for the diffusion of bulky molecules, flexibility, mechanical resistance, thermal and electrical conductivity. Here it is shown the possibility to control the porosity, mesostructure and surface chemistry of reduced graphene oxide aerogels and examples are shown about its use as catalyst and electrocatalyst support., Financial support from European Commission (FREECATS project, FP7 Grant agreement nº 280658), Spanish Ministry MINECO (project ENE2016-79282-C5-1-R), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Graphene oxide and poly(3-hexylthiophene) nanoscale interface interactions probed by KPFM

  • Palacios-Lidón, E.
  • Colchero, J.
  • Istif, Emin
  • Benito, Ana M.
  • Maser, Wolfgang K.
Poster presented at the NanoteC19 conference, International Conference on Carbon Nanosciene and Nanotechnology, 27th-30th August, Zaragoza (Spain)., Graphene oxide (GO) is a chemically modified form of graphene containing many different types of oxygen functional groups on its basal plane and edges. Their presence imparts hydrophilicity and allows for ease of processing from water dispersions. We recently have shown that sheets of graphene oxide critically affect the aggregate structure of water dispersible nanoparticles P3HTNPs and thus the performance of optoelectronic thin film devices. In this work we elucidate the photogenerated charge tranfer dynamics of (P3HTNPs-GO) ensembles with defined aggregate structure across their interface by Kelvin Probe Force microscopy (KPFM)., EU Horizon 2020 research and innovation programme Marie Sklodowska-Curie grant agreement No 642742. Project ENE2016-79282-C5-1-R. Grupo Reconocido DGA T03_17R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Formation of P3HT aggregates enhanced by type-II cellulose nanocrystals

  • Colom, E.
  • González Domínguez, José Miguel
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
Poster presented at the NanoteC19 conference, International Conference on Carbon Nanosciene and Nanotechnology, 27th-30th August, Zaragoza (Spain)., Conductive polymers are one of the most studied structures for optoelectronic devices. Poly- 3-hexylthiophene (P3HT) is especially interesting because of its charge transport ability and photocurrent generation in solar cells.1 On the other hand, nanocrystalline cellulose (NCC), obtained from the most abundant source in nature, is a very promising new material with outstanding properties.2 Moreover, NCC can be synthetized in different crystalline forms, namely, types I and II. While type I has been widely studied, works with type II NCC are scarcely reported, despite having great potential for many applications.3 Previous studies have noticed the increasing formation of J-aggregates in some hybrid materials when P3HT nanoparticles are synthetized in presence of other nanostructures like graphene oxide4. In this work, the morphological changes result in different optical and electronic properties, due to the aggregates system favoring the charge separation. We have synthetized a new hybrid material, consisting on P3HT-NCC(II) nanoparticles. These nanostructures obtained by a reprecipitation method have revealed themselves even of higher efficiency on inducing the formation of J-aggregates in the polythiophene even at moderate concentration of NCC(II) (Fig 1). This methodology could pave the way for the development of new advanced materials for photocurrent generation devices., Project ENE2016-79282-C5-1-R, PhD contract FPI: BES2017-080020 / JdC grant: IJCI-2016-27789. Grupo Reconocido DGA T03_17R, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Micro-encapsulated PCM in concrete matrix after a decade of the building construction

  • Olivieri, Lorenzo
  • Tenorio Ríos, José Antonio
Trabajo presentado a la 14th International Energy Storage Conference (EnerSTOCK), celebrada en la Universidad de Çukurova (Turquía) del 25 al 28 de abril de 2018., The reduction of the energy consumed in the building sector is no more a recommendation, but a duty of our society. Thermal energy storage (TES) implementation into buildings envelope has been highlighted as a promising technology to reduce the energy demand in buildings. Last decade, many literature have been dealing with the effect of the inclusion of latent heat storage materials in construction materials to provide higher thermal inertia. Several studies focused on the evaluation of the thermal properties, density, or porosity of these new materials. However, few of them focused on the long stability properties of the materials with embedded PCM when included in a building, since the lifetime of a building last around 50 years. In this study, an evaluation of a house-like cubicle of concrete with micro-encapsulated PCM after a decade of its construction is done. The results of this study were compared to the tests done in 2005 concluding that the thermal performance of this cubicle presented no degradation in the PCM effect., The work partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-3-R (MINECO/FEDER), ULLE10-4E-1305, and ENE2005-08256-C02-01). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123) and the city hall of Puigverd de Lleida. GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 657466 (INPATH-TES). Financiado por el proyecto RTC-2015-3583-5 (INPHASE) del Ministerio de Economía y Competitividad, dentro del Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad, en el marco del Plan Estatal de Investigación Científica y Técnica y de Innovación 2013-2016, y ha sido cofinanciado con FONDOS FEDER, con el objetivo de promover el desarrollo tecnológico, la innovación y una investigación de calidad.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Graphene aerogel with unidireccional pores of tailored size and its application as hydrophobic absorbent and as support for catalytically active nanodiamonds

  • García-Bordejé, José Enrique
  • Víctor-Román, Sandra
  • Benito, Ana M.
  • Maser, Wolfgang K.
2 figures.-- Work presented at the HeteroNanoCarb Conference 2017, 11th-15th December, Benasque (Spain)., It is of fundamental and practical significance to translate the novel physical and chemical properties of individual graphene nanosheets into the macroscale by the assembly of graphene building blocks into macroscopic architectures with control over the porous structure and functionalities. 3D graphene aerogels have some interesting properties such as high specific surface area, open porous network for ion transport, supra-flexibility, tough mechanical strength and conductive framework which lend them high potential for wide application fields such as supercapacitors, oil-water separations, sorbents, chemical reactor platforms and solar cells.[1-2] One way to prepare 3D aerogels is starting from GO sols and its gelation under hydrothermal conditions [2]. The functional groups of GO nanosheets are removed by reduction resulting in a decrease of hydrophilicity and loss of surface charges, which leads to the crosslinking of RGO nanosheets and ultimate phase separation. Herein, we have varied the hydrothermal synthesis conditions (pH, time, and freezing method) to achieve a control over the pore orientation and size of graphene aerogels. The mechanical properties of the aerogels varied from more rigid to flexible materials. In addition, we have been able to synthetize graphene aerogels with aligned channels resembling honeycomb structures (Figure 1). As a proof of concept, the materials have been tested as hydrophobic absorbents of organic compound and as support for nanodiamonds (Figure 2). The nanodiamonds supported on graphene aerogels have been tested for the selective dehydrogenation of propane providing an excellent performance., The financial support from Spanish Ministry MINECO and the European Regional Development Fund (project ENE2016-79282-C5-1-R) and Government of Aragon (Consolidated Group DGAT66).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Graphene aerogels as catalyst support for nanodiamods and metal nanoparticles

  • García-Bordejé, José Enrique
  • Víctor-Román, Sandra
  • Benito, Ana M.
  • Ansón-Casaos, Alejandro
  • Maser, Wolfgang K.
Talk delivered at the 8th International Symposium on Carbon for Catalysis CarboCatVIII, 2018, 26-29 june, Porto (Portugal), Graphene aerogels have emerged as a promising flow-through reactor for adsorption and catalysis due to its high porosity, fluidynamic characteristics and amphiphilic character. Despite these advantages, the application of graphene foams in catalysis is still very scarce. One of the challenges when preparing metal catalyst on graphene is stabilising metal nanoparticles on the low defective graphene surface. To enhance the stable attachment of metal nanoparticles different approaches can be used such as, e.g. the introduction of defects or doping. The preparation of graphene from GO reduction has the advantage that GO has many surface functional groups for doping and the creation of defects. Herein, we have prepared graphene aerogels by hydrothermal treatment of graphene oxide (GO) dispersions in an autoclave. In the autoclave a process of reduction-auto-assembly of GO nanosheets takes place leading to phase separation and precipitation of a hydrogel. The hydrogel transforms into an aerogel after freeze drying. The pore size and surface chemistry of the resulting aerogel can be controlled by manipulating the pH of the synthesis and the time of hydrothermal treatment [4]. The preparation at pH=11 leads toaerogels with higher pore volume (~200 cm3g-1 consisting mainly of macropores and more reduced than at pH=3. The graphene nanosheets have a flat morphology at pH=3 while they are bentand more reduced at pH=11, leading to more open porosity (Figure 1). In addition, aerogels with a 7% of nitrogen mainly of pyridinic-type have been prepared at pH=11 by adding NH3., The financial support from Spanish Ministry MINECO and the European Regional Development Fund (project ENE2016-79282-C5-1-R), and Regional Government of Aragon (DGA-ESF-T66 Grupo Consolidado) are gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Image compression on reconfigurable FPGA for the SO/PHI space instrument

  • Hernández Expósito, David
  • Cobos Carrascosa, Juan Pedro
  • Ramos Más, José Luis
  • Rodríguez Valido, Manuel
  • Orozco Suárez, David
  • Hirzberger, J.
  • Woch, J.
  • Solanki, S.
  • Toro, José Carlos del
In this paper we present a novel FPGA implementation of the Consultative Committee for Space Data Systems Image Data Compression (CCSDS-IDC 122.0-B-1) for performing image compression aboard the Polarimetric Helioseismic Imager instrument of the ESA's Solar Orbiter mission. This is a System-On-Chip solution based on a light multicore architecture combined with an efficient ad-hoc Bit Plane Encoder core. This hardware architecture performs an acceleration of ~30 times with respect to a software implementation running into space-qualified processors, like LEON3. The system stands out over other FPGA implementations because of the low resource usage, which does not use any external memory, and of its configurability. © 2018 SPIE., This work has been partially funded by the Spanish Ministerio de Economia y Competitividad, through Project No. ESP2016-77548-C5-1-R, including a percentage from European FEDER funds.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

The quick RTE inversion on FPGA for DKIST

  • Cobos Carrascosa, Juan Pedro
  • Ramos Más, José Luis
  • Aparicio del Moral, Beatriz
  • Hernández Expósito, David
  • Sánchez Gómez, A.
  • Balaguer Jiménez, M.
  • López Jiménez, A. C.
  • Orozco Suárez, David
  • Toro, José Carlos del
In this contribution we present a multi-core system-on-chip, embedded on FPGA, for real-time data processing, to be used in the Daniel K. Inouye Solar Telescope (DKIST). Our system will provide "quick-look" magnetic field vector and line-of-sight velocity maps to help solar physicists to react to specific solar events or features during observations or to address specific phenomena while analyzing the data off line. The stand-alone device will be installed at the National Solar Observatory (NSO) Data Center. It will be integrated in the processing data pipeline through a software interface, and is competitive in computing speed to complex computer clusters. © 2018 SPIE., This work has been partially funded by the Spanish Ministerio de Economia y Competitividad, through Project No. ESP2016-77548-C5-1-R, including a percentage from European FEDER funds.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Assessment of charge transfer phenomena in nanostructured composite materials using photoelectrochemical methods

  • Hernández-Ferrer, Javier
  • Istif, Emin
  • Ansón-Casaos, Alejandro
  • Santidrián, Ana
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 figure.-- Abstract of talk delivered at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual in Benasque (Aragon, Spain)., Photoelectrochemistry is a valuable technique for the study of intrinsic electronic properties of a great variety of nanostructured semiconductor materials, such as conductive polymers or metal oxide nanoparticles. It is also a highly valuable implement to assess charge and/or energy transfer phenomena between the mentioned semiconductors and carbon nanomaterials (GO, CNTs), unveiling their role as charge acceptors/donors, blockers/transporters, sensitizers/conditioners, or even as photoelectroactive materials for themselves, thus allowing the tuning of optoelectronic properties of composite materials, for their future application in fields related to energy and environment, such as water splitting, solar cells or water remediation. This versatility makes photoelectrochemistry a key tool in the field of carbon nanoscience and nanotechnology., MINEICO (project ENE2016-79282-C5-1-R, AEI/FEDER, UE), European Union (H2020-MSCA-ITN-2014-ETN 642742 ), Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER, UE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Fabrication of thin conductive films made up of SWCNT aqueous inks through green approaches

  • Álvarez Sánchez, Miguel Ángel
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 figure.-- Poster presented at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, at Centro de Ciencias de Benasque Pedro Pascual in Benasque (Aragon, Spain)., Conductive inks development is currently a field of study for electronic applications, including energy devices and sensors, where metal nanoparticles (MNPs) have most commonly been used. However, MNPs present important disadvantages, typically the scarcity of noble metals (Au, Ag, Pt) and the easy oxidation of the rest (Cu, Al). Carbon nanomaterials, such as single-walled carbon nanotubes (SWCNTs), are regarded as an alternative for the fabrication of conductive inks, because of their properties: electronic and thermal conductivity, 1D structure, surface functionalization, and the dispersion in many surfactants and some organic solvents, which are unfortunately highly toxic and unsustainable.1 New biofriendly and sustainable dispersing agents are on demand, and also the use of water as the liquid medium for conductive inks. Nanocellulose, an emerging 'green' nanomaterial, posseses many desirable features: hydrophilicity, sustainability, abundance and exellent performance as dispersing agent, which makes it a promising candidate as an alternative to toxic surfactants and hazardous organic solvents. 2 Herein, we report the facile, non-toxic and environmentally friendly fabrication of aqueous and stable conductive inks made up of SWCNTs, using nanocrystalline cellulose as dispersant agent. 3 The conductive ink was deposited by optimized spray coating techniques to fabricate the thin films, which were characterized in terms of electrical properties., Spanish MINEICO (Project ENE2016-79282-C5-1-R, AEI/FEDER, UE) and Government of Aragon (Grupo de Referencia DGA-T03_17R, FEDER, UE)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

GO-ing on with graphene oxide

  • Maser, Wolfgang K.
  • Benito, Ana M.
HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual, in Benasque (Aragon, Spain)., Graphene oxide (GO) is an elusive but highly fascinating tunable nanostructure. Dispersible in aqueous solutions, it can be easily processed into macroscopic functional materials such as papers, aerogels and thin films for different kinds of applications. Equally, it can be used as versatile platform for the formation of functional hybrid optoelectronic materials. GO-ing on with GO research, we will present our latest findings on the use of GO as unique interface layer. We will demonstrate that GO can be employed in a controllable way to enable or block charge transfer in optoelectronic device structures. Emphasis is given on the unique and highly dynamic charge-transfer interface interactions established with conjugated polymers facilitating improved thin film operation of interest for optoelectronic device structures., Funding by EU (Project H2020-ITN 2014 642742), Spanish MINEICO (Project ENE2016-79282-C5-1-R, AEI/FEDER) and Government of Aragon (DGA-T03-17R, FEDER, UE), is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Optimizing bacterial cellulose production towards materials for water remediation

  • Calvo Peña, Víctor
  • Torrubia, Javier
  • Blanco, Domingo
  • García-Bordejé, José Enrique
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • González Domínguez, José Miguel
Abstract of the poster presented at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual in Benasque (Aragon, Spain)., Cellulose is a renewable alternative to mass consumption plastics, but its manufacture by the classical methods is not sustainable due to the use of large amounts of strong acids, bases and/or organic species (e.g. ionic liquids) in its production, generating many residues. Bacterial cellulose (BC) has a simpler processing because it is much more cleanly generated. In this work, BC hydrogels, stemming from Komagateibacter xylinus bacteria, has been optimized in terms of bacterial culture and subsequently tailored in their physical properties after drying, giving rise to aerogels and xerogels. These are compared in order to ascertain how the bacterial culture conditions (pH, carbon and nitrogen sources) and the raw hydrogels processing determine their thermal stability, crystallinity index, swelling ratio and flammability. The most notable results are the influence of the drying method on the swelling ratio and the carbon source on the thermal stability. It is possible to control the BC hydrogel properties by rationally selecting the appropriate drying method. In this regard, the aerogels (obtained by lyophilisation) have a much larger sorption capacity and a higher porosity, whereas xerogels (obtained by drying in open air) are more compact, as observed by SEM. Contrary to the aerogels, the BC xerogels are non-flammable. The pH of the culture medium does not have a great influence on the thermal stability of the xerogels and aerogels, but it is important for the hydrogel production rate and slightly influences the CI. The carbon source has a greater influence in the thermal stability of the final materials. Fructose provides a higher thermal stability; however, its dry materials are flammable; glucose and saccharose show an inverse trend as compared to fructose. The advantage of glucose over the fructose and saccharose is its somewhat faster production rate. Finally, a feasible application of BC aerogels is presented by treating contaminated water and by capturing water within a nonpolar solvent, taking advantage of the dry BC sorption capacity. The accomplishment of a sorption test demonstrates that BC aerogels, once optimized in production and physical properties, can be applied as an efficient sorbent, taking advantage of their porosity and hydrophilic character. There are other possible implementations, such as filters to purify water, with critical implications in human safety and defence against chemical threats., Financial support was obtained from the Spanish Ministry of Economy, Industry and Competitiveness (MINEICO), through project IJCI-2016-27789, the Spanish Research Agency (AEI) through GRAPEROS project (ref ENE2016-79282-C5-1-R1 and associated EU Regional Development Funds), and from Gobierno de Aragón (Grupo Reconocido DGA T03_17R, A02_17R and associated EU Regional Development Funds). Dr. J.M.G.-D. greatfully acknowledges MINEICO for his ‘Juan de la Cierva – Incorporación’ research contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Reduced graphene oxide aerogels with unidirectional porosity as structured support for electrocatalysis

  • Carrera Jiménez, Clara
  • Hernández-Ferrer, Javier
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
1 figure.-- Poster presented at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual in Benasque (Aragon, Spain)., 3-D graphene structures have been thoroughly studied in order to translate the properties of individual graphene nanosheets into the macroscale by the assembly of graphene building blocks with control over the porous structure and functionalities. 3D graphene aerogels have some interesting properties such as high specific surface area, open porous network for ion transport, flexibility, tough mechanical strength and conductive framework which lend them high potential for wide application fields such as supercapacitors, oil-water separations, sorbents, chemical reactor and solar cells [1]. One way to prepare 3D aerogels is gelation of GO dispersions under hydrothermal conditions [2]. Upon hydrothermal treatment, the functional groups of GO nanosheets are removed by reduction resulting in a decrease of hydrophilicity and loss of surface charges, which leads to the crosslinking of rGO nanosheets and ultimate phase separation. Herein, we have achieved a control over the orientation and size of the pores in graphene aerogels as a way of prepare aerogels of unidirectional pores (Figure 1) [3] by modifying the hydrothermal synthesis conditions (pH, time, and freezing method). Moreover, the pH of the initial solution has a profound impact on the reduction degree and morphology of the individual graphene nanoplatelets.[2] Previously, the group has tested the aerogels for water remediation [2] and as supercapacitors [5]. In this work, the materials have been used as platinum nanoparticles support and tested for hydrogen evolution reaction (HER)., MINECO (project ENE2016-79282-C5-1-R, AEI/FEDER, UE)), Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER, UE)).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

The surface chemistry of graphene oxide: Key towards enhanced performance of ZnO-GO photocatalysts

  • Víctor-Román, Sandra
  • García-Bordejé, José Enrique
  • Hernández-Ferrer, Javier
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Silva, Adrián M. T.
  • Maser, Wolfgang K.
  • Benito, Ana M.
2 figures.-- Abstract ot the poster presented at the NanoteC19 conference, International Conference on Carbon Nanosciene and Nanotechnology, 27th-30th august 2019, Zaragoza (Spain)., Graphene oxide (GO) is known to facilitate the enhancement of the photocatalytic performance of semiconducting metal oxides such as TiO2 or ZnO. However, the influence of its particular surface chemistry has not been clarified. In this work we employ GO with distinct and well-defined oxidation degree for the preparation of ZnO-GO hybrid materials. We demonstrate that the surface chemistry of GO is key for facilitating favorable interface interactions. This results in a lowering of the alignment of energy levels at the ZnO-GO interface and enables the transfer of photo-excited electrons from ZnO to GO. The remaining positive charge at the valence band of ZnO then easily can promote oxidation reactions with the analyte and/or the solvent. In this way, GO reduces the recombination rate of the photogenerated electron-hole pair and enhances the photocatalytic activity of ZnO. We show that by solely controlling the oxidation degree of GO and by optimizing the loading fraction highly efficient ZnO-GO photocatalysts can be prepared. Most favorable conditions are achieved for intermediate oxidation degrees of GO. Optimized ZnO-GO hybrids thus reveal photocatalytic degradation of methylene blue at conversion rates of up to 80%, within times as short as 70 minutes at concentrations as low as 0.045 mg/mL, accompanied by a good recyclability behavior. The results are of general character and extendable to semiconducting metal oxides used in photocatalysis [1]., Spanish MINEICO (Project ENE2016-79282-C5-1-R, AEI/FEDER, UE and FPI Grant BES2014-068727) and Government of Aragon (DGA-T03-17R, FEDER, UE), is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

P3HT aggregation tuned by synergic interaction with different carbon nanostructures

  • Colom, E.
  • Istif, Emin
  • González Domínguez, José Miguel
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 figure.-- Talk delivered at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual, in Benasque (Aragon, Spain)., Poly(3-hexylthiophene) (P3HT) is one of the most popular conductive polymers for optoelectronic applications. [1] Their device operation critically depends on the nanocrystalline domain structure, i.e. the aggregate structure acquired by the polymer chains. Most common aggregates' distribution corresponds to H-aggregates, which implies charge transfer across the chains compared to those acquiring a J- aggregate structure with favorable charge transport along the chains. [2] We recently have shown that strong interactions between P3HT and water-dispersible graphene oxide can be obtained upon the formation of P3HT nanoparticles in aqueous dispersions. [3,4] These interactions enable a significant modification of the internal structure of P3HT aggregates towards a structure predominated by J-aggregates. Following this approach, in this work we have synthesized P3HT nanoparticles by the re-precipitation method in the presence of various types of water-soluble carbon nanostructures. Under scrutiny are graphene oxide flakes of different sizes, as well as nanocrystalline cellulose of type I and II. Of all the nanostructures exploited, the rarely investigated nanocyrstalline cellulose of type II, [5] exhibits significantly enhanced synergetic interface interactions with P3HT nanoparticles. This finding not only reveals a great potential towards improved thin film optoelectronic device structures, but even more underlines value of nanocellulose II for the development of green inks of photoactive polymers, ready to be used for printed electronics., Funding by EU (Project H2020-ITN 2014 642742), Spanish MINEICO (Project ENE2016-79282-C5-1-R1 (AEI/FEDER, UE), contract BES2017-080020 including FSE, UE, contract IJCI-2016-27789) and Government of Aragon (DGA-T03-17R and FEDER, UE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Carbon nanotube films as current collectors in TiO2 photoanodes

  • Ansón-Casaos, Alejandro
  • Lafragüeta, Ignacio
  • Benito, Ana M.
  • Maser, Wolfgang K.
Poster presented at the International Solar Fuels Conference 2021 (ISF2021), 26-29 July 2021, Online, organized by the The Royal Society of Chemistry. P. 128., Commercial methods for the production of green hydrogen are based on alkaline or proton exchange membrane (PEM) electrolysis. Several alternatives are being investigated, including photo-electrochemical water splitting. At a laboratory scale, working electrodes are tipically assembled on ITO of FTO transparent conducting films. Those substrates could be substituted by cheaper more abundant materials. Therefore, we fabricated opaque films of carbon nanotubes (CNTs) to be probed as supports for a photo-active semiconductive oxide, namely nanoparticulate TiO2. Aqueous dispersions of single-walled and multi-walled CNTs were prepared by sonication or stirring in a surfactant (SDBS). The inks were utilized to fabricate conducting electrodes by ultrasounds-assisted spraycoating on glass substrates. Nanoparticulate TiO2 (Aeroxide P25) was deposited on the CNT films by spray-coating of isopropanol suspensions. The TiO2/CNT electrodes were tested in a transient photocurrent experiment in 0.1M Na2SO4 at 0.4V vs. Ag/AgCl. A large capacitance contribution was detected because of CNTs. However, it was clearly demonstrated that an anodic photocurrent is generated under irradiation with a solar simulator (~300 mW·cm-2). While the obtained photocurrents were small ( a few µA·cm-2), the way is open to optimize new architectures for PEC hydrogen generation.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Aerogeles de grafeno con porosidad ajustable como soporte estructurado de catalizadores y electrocatalizadores

  • Sánchez-García, Joel
  • Carrera Jiménez, Clara
  • Hernández-Ferrer, Javier
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
1 figura y 1 tabla.-- Resumen del póster presentado en la Reunión Bienal de la Sociedad Española de Catálisis (SECAT 2019), celebrada en Córdoba, del 24 al 16 de junio de 2019., Es de gran importancia, tanto fundamental como práctica, trasladar las propiedades de láminas bidimensionales de grafeno a estructuras macroscópicas 3D con un control de la estructura porosa y de la funcionalidad. Sin embargo, el grafeno, tanto el preparado por CVD como el preparado por reducción de GO, tiene tendencia a apilarse para formar grafito y disminuir su superficie expuesta. Esto es uno de los principales inconvenientes que ha impedido la explotación de todo su potencial. Los aerogeles de grafeno tienen propiedades interesantes como alta área superficial específica, macroporosidad abierta para favorecer el transporte de moléculas voluminosas y iones, flexibilidad, resistencia mecánica y conductividad térmica y eléctrica que les confiere un gran potencial para distintos campos de aplicación incluido su uso como reactores catalíticos y electrocatalizadores [1]. Una manera eficiente de preparar aerogeles de grafeno es partiendo de dispersiones de óxido de grafeno (GO) y su gelación bajo condiciones hidrotermales [2]. En el proceso hidrotermal, algunos grupos funcionales oxigenados de las láminas de GO se eliminan por reducción formando oxido de grafeno reducido (RGO). Simultáneamente, ocurre una disminución de la hidrofilicidad y pérdida de cargas superficiales, lo que conduce al entrecruzamiento de las láminas de RGO y una separación de fases para formar un hidrogel. Después de secado criogénico se forma el aerogel que es el que se ha utilizado como soporte de catalizadores en este trabajo. En un trabajo anterior, se ha soportado nanodiamantes y se han probado en la deshidrogenación oxidativa de propano [3]. En este trabajo, se han soportado metales nobles y metales de transición y se han probado en la oxidación selectiva de alcohol bencílico a benzaldehído y como electrocatalizadores para la descomposición de agua., Agradecemos el soporte financiero del MINECO (project ENE2016-79282-C5-1-R), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), y “EU Regional Development Funds” asociados., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Purificación de dispersiones acuosas de nanotubos de carbono de capa única mediante centrifugación

  • Ansón-Casaos, Alejandro
  • Santidrián, Ana
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • Martínez Fernández de Landa, María Teresa
Trabajo presentado a la XIV Reunión del Grupo Español del Carbón, celebrada en Málaga del 22 al 25 de Octubre de 2017., La presentación de este trabajo ha sido posible gracias a la financiación recibida de la Comisión Europea (H2020-MSCA-ITN-20 14-ETN 642742 "Enabling Excel lence"), el MINECO y el FEDR (ENE 2016-79282-CS-1-R) y el Gobierno de Aragón y el FSE (DGA-ESF-T66 "Grupo Consolidado")., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Photopotential and photocurrent improvement of TiO2 in alkaline media by an electrocvhemically reduced graphene oxide layer

  • Hernández-Ferrer, Javier
  • Sanahuja-Parejo, Olga
  • Víctor-Román, Sandra
  • Martínez Fernández de Landa, María Teresa
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
Resumen del trabajo presentado al HeteroNanoCarbo: "Advances and Applications in Carbon Related Nanomaterials: From Pure to Doped Structures Including Heteroatom Layers", celebrada en Benasque (España) del 11 al 15 de diciembre de 2017., Financial support from Spanish Ministerio de Economía, Competitividad y Industria (MINECO, project ENE2016-79282-C5-1R and associated EU Regional Development Funds, and the Gobierno de Aragón (Consolidated Group DGA-T66-GCNN and associated EU Social Funds) is acknowledged. S.V.R. acknowledges MINECO for her PhD contract (BES-2014-068727)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Graphene oxide as versatile charge-transfer interface for improved optoelectronic materials

  • Maser, Wolfgang K.
  • Benito, Ana M.
Talk delivered at the 2019 Nano Applications Workshop, 17th-18th july 2019, München (Germany)., Graphene oxide (GO) is a highly defective chemically modified form of graphene containing many different types of oxygen functional groups on its basal plane and edges. Their presence imparts hydrophilicity and allows for easy processing from water dispersions. These facts constitute the base for their use as platforms for the formation of functional hybrid optoelectronic materials, Here GO serves as highly versatile interface layer which can be employed in a controllable way to allow or block charge transfer in optoelectronic materials. 1,2,3,4, thus contributing to improved thin film device performance. In this presentation, we will focus on the interaction of GO with conjugated polymers emphasizing the dynamic charge-transfer across the interface layer in different configurations., EU Horizon 2020 Marie Sklodowska-Curie grant 642742 ("Enabling Excellence"), Spanish Ministry MINEICO (ENE2016-79282-C5-1-R and ENE2016-79282-C5-4-R), Gobierno de Aragón (Recognized Group DGA-T03-17R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Fotocatalizadores de TiO2 modificados con B. Aplicación en la oxidación fotocatalítica de propeno

  • Cano Casanova, Laura
  • Amorós-Pérez, A.
  • Ansón-Casaos, Alejandro
  • Lillo-Ródenas, Maria Ángeles
  • Román Martínez, María del Carmen
1 figura.-- Resumen del trabajo presentado en la reunión SECAT 2019, Reunión Bienal de la Sociedad Española de Catálisis, celebrada del 24 al 26 de junio de 2019, en Córdoba (España)., El dióxido de titanio es muy interesante como fotocatalizador en muchas reacciones de descomposición de contaminantes, principalmente debido a su excelente capacidad oxidativa, estabilidad química, bajo precio, inocuidad y biocompatibilidad. Sin embargo, aún sería deseable mejorar su eficiencia fotocatalítica mediante la disminución de la velocidad de recombinación de los pares electrón-hueco y la ampliación del intervalo de absorción hacia el espectro visible. Una de las opciones potenciales de mejora se centra en la modificación del TiO2 con boro, que en algunos casos podría dar lugar a una disminución de la energía del límite inferior de la banda de conducción del TiO2. En el presente trabajo se estudia dicha modificación empleando ácido bórico para introducir B en la composición del TiO2 preparado mediante el método sol-gel y se investiga el efecto de la cantidad de boro introducido y la temperatura de cristalización. Estos fotocatalizadores se han probado en la oxidación fotocatalítica de propeno en fase gas., Los autores agradecen la financiación económica de los proyectos PROMETEO/2018/076 (GV/Feder), RTI2018-095291-B-I00 y ENE2016-79282-C5-1-R (Ministerio de Ciencia, Innovación y Universidades), T03-17R (Gobierno de Aragón) y VIGROB-136 (UA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Reducción de CO2 a CH4 usando materiales nanocarbonosos o monolitos recubiertos de alumina como soportes

  • Bustinza, Ainhoa
  • Roldán, Laura
  • García-Bordejé, José Enrique
1 figura.-- Resumen del póster presentado en la reunión SECAT 2019, Reunión Bienal de la Sociedad Española de Catálisis, celebrada del 24 al 26 de junio de 2019, en Córdoba (España)., Las energías renovables es una de las soluciones energéticas del futuro, debido a los riesgos medioambientales del uso de los combustibles fósiles y que sus reservas son limitadas. Sin embargo, la producción de energía a partir de fuentes renovables es intermitente, no coincidiendo normalmente la demanda y oferta ni en el tiempo, ni en el espacio. Por tanto, urge el desarrollo de soluciones para el almacenamiento y transporte de la energía renovable. Una solución es la conversión de la energía renovable en H2 mediante electrolisis. El principal problema es su almacenamiento y transporte puesto que el tiempo típico de descarga en las infraestructuras actuales es menos de 100 horas. Cuando se requiere almacenamiento por largo tiempo, una opción es la conversión de H2 con CO2 en gas natural sintético (CH4), que puede almacenarse en las actuales infraestructuras sin limitación. Además, el uso de CO2 como materia prima contribuye a cerrar el ciclo del carbono con el beneficio medioambiental que ello conlleva. La reacción de CO2 con H2 se descubrió hace más de un siglo y se conoce como reacción de Sabatier [1]. Diferentes metales de transición y nobles soportados en óxidos metálicos se han usado como soporte de catalizador en esta reacción. El uso de materiales carbonosos en esta reacción es muy escaso, incluso se ha descrito que los nanotubos de carbono (CNT) son inactivos para esta reacción, lo que se atribuye a la incapacidad de quimisorber CO2 por parte del soporte [2]. Para la aplicación industrial de esta tecnología es fundamental el diseño del reactor catalítico. La hidrogenación de CO2 para producir CH4 es altamente exotérmica (ΔHRo=-165 kJ/mol). Por tanto, es esencial una adecuada evacuación del calor generado para evitar puntos calientes que disminuyen el rendimiento a CH4 y la vida del catalizador. Para solucionarlo, se han usado diferentes tipos de reactores como lechos fluidizados, reactores multitubulares enfriados externamente o reactores en etapas con enfriamiento intermedio [3]. Más recientemente, se ha propuesto el recubrimiento de intercambiadores de calor con la fase catalíticamente activa. De manera que se integra la reacción y el enfriamiento. En este contexto, el recubrimiento catalítico de monolitos se ha propuesto como un modelo para el recubrimiento de intercambiadores de calor para la metanación de CO2 [4]. Además, los monolitos tienen baja perdida de carga lo que permitiría convertir el CO2 de gases de postcombustión, que se emiten a presión atmosférica, sin necesidad de represurizarlos. En este trabajo, hemos soportado nanopartículas de Ru en nanotubos de carbono (CNTs), nanofibras de carbono (CNFs) y nanofibras dopadas con nitrógeno (N-CNF). Los catalizadores con un 5% Ru soportados en CNF, N-CNF y CNT se han comparado a un catalizador comercial de 5% de Ru en alúmina (Ru/Al2O3). Para estudiar la relación entre la estructura y el comportamiento, los catalizadores se han caracterizado exhaustivamente por TEM y técnicas transitorias como desorción a temperatura programada (TPD) y reacción superficial a temperatura programada (TPSR). En una segunda parte, monolitos de cordierita se han recubierto con alúmina. Posteriormente, se ha utilizado como fase activa Ni, Ru y catalizadores bimetálicos de ambos optimizando la preparación del catalizador para la reacción de metanación de CO2., The authors are indebted to the funding of European Commission (FREECATS project, grant agreement No. 280658), Financial support from Spanish Ministry MINECO (project ENE2016-79282-C5-1-R), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Reduced graphene oxide aerogels with tailored porosity as structured support for catalysis and electrocatalysis

  • Carrera Jiménez, Clara
  • Hernández-Ferrer, Javier
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • García-Bordejé, José Enrique
1 figure.-- Abstract ot the poster presented at the NanoteC19 conference, International Conference on Carbon Nanosciene and Nanotechnology, 27th-30th august 2019, Zaragoza (Spain)., It is of fundamental and practical significance to translate the novel physical and chemical properties of individual graphene nanosheets into the macroscale by the assembly of graphene building blocks into macroscopic architectures with control over the porous structure and functionalities. 3D graphene aerogels have some interesting properties such as high specific surface area, open porous network for ion transport, flexibility, tough mechanical strength and conductive framework which lend them high potential for wide application fields such as supercapacitors, oil-water separations, sorbents, chemical reactors and solar cells [1]. One way to prepare 3D aerogels is starting from GO dispersions and its gelation under hydrothermal conditions [2]. Upon hydrothermal treatment, the functional groups of GO nanosheets are removed by reduction resulting in a decrease of hydrophilicity and loss of surface charges, which leads to the crosslinking of RGO nanosheets and ultimately to phase separation. Herein, we have varied the hydrothermal synthesis conditions (pH, time, and freezing drying methodology) to achieve a control over the orientation and size of the pores in graphene aerogels, preparing aerogels of unidirectional pores (Figure 1) [3]. Moreover, the pH of the initial solution has a profound impact on the reduction degree and morphology of the individual graphene nanoplatelets.[2] As a proof of concept, the materials have been tested as support for nanodiamonds metalfree catalyst for selective propane dehydrogenation[4] and as noble metal catalyst support for benzyl alcohol oxidation and electrocatalyst for water splitting (HER, OER) and ORR., MINECO (project ENE2016-79282-C5-1-R), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

The surface chemistry of graphene oxide: Enhancing the performance of ZnO to GO photocatalysts

  • Víctor-Román, Sandra
  • García-Bordejé, José Enrique
  • González Domínguez, José Miguel
  • Ansón-Casaos, Alejandro
  • Silva, Adrián M. T.
  • Maser, Wolfgang K.
  • Benito, Ana M.
Abstract of the poster presented at the HeteroNanoCarb-2019 Conference, Advances and applications in carbon related nanomaterials: From pure to doped structures including heteroatom layers, 2019, December 09th -- 13th, Centro de Ciencias de Benasque Pedro Pascual, in Benasque (Aragon, Spain)., We demonstrate that the surface chemistry of graphene oxide Graphene oxide (GO) is of critical importance for the photocatalytic performance of semiconducting metal oxides such as TiO2 or ZnO. To this end we employ GO with distinct and well-defined oxidation degree for the preparation of ZnO-GO hybrid materials. We show that the surface chemistry of GO is key for facilitating favorable interface interactions. This results in a lowering of the alignment of energy levels at the ZnO-GO interface and enables the transfer of photo-excited electrons from ZnO to GO. The remaining positive charge at the valence band of ZnO then easily can promote oxidation reactions with the analyte and/or the solvent. In this way, GO reduces the recombination rate of the photogenerated electron-hole pair and enhances the photocatalytic activity of ZnO. We show that by solely controlling the oxidation degree of GO and by optimizing the loading fraction highly efficient ZnO-GO photocatalysts can be prepared. Most favorable conditions are achieved for intermediate oxidation degrees of GO. Optimized ZnO-GO hybrids thus reveal photocatalytic degradation of methylene blue at conversion rates of up to 80%, within times as short as 70 minutes at concentrations as low as 0.045 mg/mL, accompanied by a good recyclability behavior. The results are of general character and extendable to semiconducting metal oxides used in photocatalysis [1]., Spanish MINEICO (Project ENE2016-79282-C5-1-R, AEI/FEDER, UE and FPI Grant BES2014-068727) and Government of Aragon (DGA-T03-17R, FEDER, UE), is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Photoelectrochemistry: a tool for the study of charge transfer at interfaces with carbon nanostructured materials

  • Hernández-Ferrer, Javier
  • Istif, Emin
  • Ansón-Casaos, Alejandro
  • Santidrián, Ana
  • Víctor-Román, Sandra
  • Benito, Ana M.
  • Maser, Wolfgang K.
Work presented at the NanoteC19 conference, International Conference on Carbon Nanosciene and Nanotechnology, 27th-30th august 2019, Zaragoza (Spain)., Photoelectrochemistry of nanomaterials is commonly employed in fields related to energy and environmental applications, such as water splitting, solar cells or water remediation. It is a valuable technique for the direct evaluation of the performance for the desired application. In addition, it can be used for the study of intrinsic electronic properties of nanostructured of a great variety of semiconductor materials, such as conductive polymers or metal oxide nanoparticles. It is also a highly valuable implement to assess charge and/or energy transfer phenomena between the mentioned semiconductors and carbon nanomaterials (GO, CNTs), unveiling their role as charge acceptors/donors, blockers/transporters, sensitizers/conditioners, or even as electroactive materials for themselves, thus allowing the tuning of optoelectronic properties of composite materials. This versatility makes photoelectrochemistry a key tool in the field of carbon nanoscience and nanotechnology [1-4]., MINECO (project ENE2016-79282-C5-1-R), European Union (H2020-MSCA-ITN-2014-ETN 642742), Gobierno de Aragón (Grupo Reconocido DGA T03_17R), and associated EU Regional Development Funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Charge transfer in nanostructured composite materials: a photoelectrochemical approach

  • Hernández-Ferrer, Javier
  • Istif, Emin
  • Ansón-Casaos, Alejandro
  • Santidrián, Ana
  • Benito, Ana M.
  • Maser, Wolfgang K.
1 Figure.-- Abstract of the work presented at "Current Trends in Electrochemistry", 41st Meeting of the Electrochemisty Group of the Spanish Royal Society of Chemistry, 1st French‐Spanish Atelier/Workshop on Electrochemistry, 6 - 9 July 2021, Paris (France)., Photoelectrochemical techniques are accurate for the study of intrinsic electronic properties of a great variety of nanostructured semiconductor materials, such as conductive polymers, carbon nanomaterials (GO, CNTs, CDs) or metal oxide nanoparticles. It is also a highly valuable implement to assess charge and/or energy transfer phenomena between the mentioned semiconductors unveiling their role as charge acceptors/donors, blockers/transporters, sensitizers/conditioners, or even as photoelectroactive materials for themselves, thus allowing the tuning of optoelectronic properties of composite materials, for their future application in fields related to energy and environment, such as water splitting, electronics, solar cells or water remediation. This versatility makes photoelectrochemistry a key tool in the field of nanoscience and nanotechnology., MINECO and AEI/FEDER/UE (project ENE2016-79282-C5-1-R), European Union (H2020-MSCAITN- 2014-ETN 642742), Gobierno de Aragón (Grupo Reconocido DGA T03_17R, FEDER/UE)., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

SemEval-2016 Task 1: Semantic textual similarity, monolingual and cross-lingual evaluation

  • Agirre, Eneko
  • Banea, Carmen
  • Cer, Daniel
  • Diab, Mona
  • Gonzalez Agirre, Aitor
  • Mihalcea, Rada
  • Rigau Claramunt, German
  • Wiebe, Janyce
Comunicació presentada al 10th International Workshop on Semantic Evaluation (SemEval-2016), celebrat els dies 16 i 17 de juny de 2016 a San Diego, Califòrnia., Semantic Textual Similarity (STS) seeks to measure the degree of semantic equivalence between two snippets of text. Similarity is expressed on an ordinal scale that spans from semantic equivalence to complete unrelatedness. Intermediate values capture specifically defined levels of partial similarity. While prior evaluations constrained themselves to just monolingual snippets of text, the 2016 shared task includes a pilot subtask on computing semantic similarity on cross-lingual text snippets. This year’s traditional monolingual subtask involves the evaluation of English text snippets from the following four domains: Plagiarism Detection, Post-Edited Machine Translations, Question-Answering and News Article Headlines. From the questionanswering domain, we include both questionquestion and answer-answer pairs. The cross-lingual subtask provides paired SpanishEnglish text snippets drawn from the same sources as the English data as well as independently sampled news data. The English subtask attracted 43 participating teams producing 119 system submissions, while the crosslingual Spanish-English pilot subtask attracted 10 teams resulting in 26 systems., This material is based in part upon work supported by DARPA-BAA-12-47 DEFT grant to George Washington University, by DEFT grant #12475008 to the University of Michigan, and by a MINECO grant to the University of the Basque Country (TUNER project TIN2015-65308-C5-1-R). Aitor Gonzalez Agirre is supported by a doctoral grant from MINECO (PhD grant FPU12/06243).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Benchmarking of energy demand of residential buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Solar thermal energy has been adopted in medium and long‐term energy strategies within EU countries for increasing the energy efficiency of buildings. In this context, the overall objective of this project consists in developing an innovative high performance and cost effective hybrid system (solar heat and electrical power). The initial application is to be implemented in residential buildings for on‐site electricity and heat generation using solar thermal energy. The proposed technology is expected to deliver 60% of domestic energy requirements (heating and domestic hot water) and provide 20% reduction in energy costs and greenhouse gas emissions compared to the best existing low carbon energy technologies. A benchmark on the energy demand for the different types of residential buildings in Europe serves as reference scenario to evaluate the potential applicability of the different existing renewable technologies and to establish a comparative framework in terms of quantitative values. Thus, the specific aim of this study consists in performing a state‐of‐the‐art on the different building typologies, which can host this technology, and their energy demands for heating and domestic hot water, as well as their associated CO2 emissions., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar) and Nº 657466 (INPATH‐TES). The work is partially funded by the Spanish government ENE2015‐64117‐ C5‐1‐R (MINECO/FEDER) and ENE2015‐64117‐C5‐3‐R (MINECO/FEDER). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thank Ministerio de Economía y Competitividad de España for Grant Juan de la Cierva, FJCI‐2014‐19940.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Multilingual CALL framework for automatic language exercise generation from free text

  • Perez Miguel, Naiara
  • Cuadros Oller, Montse
Comunicació presentada a la 15th Conference of the European Chapter of the Association for Computatinal Linguistics (EACL 2017), celebrada els dies 3 a 7 d'abril de 2017 a València, Espanya., This paper describes a web-based application to design and answer exercises for language learning. It is available in Basque, Spanish, English, and French. Based on open-source Natural Language Processing (NLP) technology such as word embedding models and word sense disambiguation, the system enables users to create automatically and in real time three types of exercises, namely, Fill-inthe-Gaps, Multiple Choice, and Shuffled Sentences questionnaires. These are generated from texts of the users’ own choice, so they can train their language skills with content of their particular interest., This work has been funded by the Spanish Government (project TIN2015-65308-C5-1-R).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

​Annotation of negation in the IULA Spanish Clinical Record Corpus

  • Marimon, Montserrat
  • Vivaldi, J. (Jorge), 1952-
  • Bel Rafecas, Núria
Comunicació presentada a SemBEaR 2017: Computational Semantics Beyond Events and Roles, celebrat el dia 4 d'abril de 2017 a València, Espanya., This paper presents the IULA Spanish Clinical Record Corpus, a corpus of 3,194 sentences extracted from anonymized clinical records and manually annotated with negation markers and their scope. The corpus was conceived as a resource to support clinical text-mining systems, but it is also a useful resource for other Natural Language Processing systems handling clinical texts: automatic encoding of clinical records, diagnosis support, term extraction, among others, as well as for the study of clinical texts. The corpus is publicly available with a CC-BY-SA 3.0 license., This work was partially supported by the project TUNER (TIN2015-65308-C5-1-R, MINECO/FEDER).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Multilingual event detection using the NewsReader pipelines

  • Agerri, Rodrigo
  • Aldabe, Itziar
  • Laparra, Egoitz
  • Rigau Claramunt, German
  • Fokkens, Antske
  • Huijgen, Paul
  • Izquierdo Beviá, Rubén
  • van Erp, Marieke
  • Vossen, Piek
  • Minard, Anne-Lyse
  • Magnini, Bernardo
Comunicació presentada al LREC 2016 Workshop: Cross-Platform Text Mining and Natural Language Processing Interoperability, celebrat el dia 23 de maig de 2016 a Portoroz, Eslovènia., We describe a novel modular system for cross-lingual event extraction for English, Spanish, Dutch and Italian texts. The system consists of a ready-to-use modular set of advanced multilingual Natural Language Processing (NLP) tools. The pipeline integrates modules for basic NLP processing as well as more advanced tasks such as cross-lingual Named Entity Linking, Semantic Role Labeling and time normalization. Thus, our cross-lingual framework allows for the interoperable semantic interpretation of events, participants, locations and time, as well as the relations between them., This work has been partially funded by NewsReader (FP7-ICT2011-8-316404) and TUNER (TIN2015-65308-C5-1-R).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Comparative analysis of energy demand and CO2 emissions of residential buildings, Benchmarking of energy demand and CO2 emissions of domestic residential buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Rapid expansion of solar thermal energy for increasing energy efficiency of buildings has been adopted in short/medium and long-term energy strategies of EU countries. Within this context, the overall objective of this work is to develop an innovative high performance and cost effective hybrid solar heat and power system. The initial application is to be implemented in individual dwellings and small business residential buildings for onsite electricity and heat generation using solar thermal energy. It is estimated that the proposed technology will deliver 60% of domestic energy requirements and provide 20% reduction in energy costs and greenhouse gas emissions compared to the best existing low carbon energy technologies. The aim of this study consists in performing a comparative analysis of the different building typologies, which can host this technology, and their energy demands for heating and domestic hot water, as well as their CO2 emissions., This study has received funding from Eurepean Union's Horizon 2020 research and innovation programme under grant agreement Nº 723596 (Innova MicroSolar) and Nº 657466 (INPATH-TES). The work is partially funded by the Sapnish government ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER). GREA is certified agent TECNIO in the cathegory of technology developers from the Government of Catalonia. The authors would like to thanks the Calatan Governmnet for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thanks Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

An adaptable lexical simplification architecture for major ibero-romance languages

  • Ferrés, Daniel
  • Saggion, Horacio
  • Gómez Guinovart, Xavier
Comunicació presentada a: EMNLP 2017, Workshop Building Linguistically Generalizable NLP Systems; celebrat el 8 de setembre de 2017 a Copenhagen, Dinamarca., Lexical Simplification is the task of reducing the lexical complexity of textual documents by replacing difficult words with easier to read (or understand) expressions while preserving the original meaning. The development of robust pipelined multilingual architectures able to adapt to new languages is of paramount importance in lexical simplification. This paper describes and evaluates a modular hybrid linguistic-statistical Lexical Simplifier that deals with the four major Ibero-Romance Languages: Spanish, Portuguese, Catalan, and Galician. The architecture of the system is the same for the four languages addressed, only the language resources used during simplification are language specific., This work is (partly) supported by the Spanish Ministry of Economy and Competitiveness under the Maria de Maeztu Units of Excellence Programme (MDM-2015-0502) and by the TUNER project (TIN2015-65308-C5-5-R and TIN2015- 65308-C5-1-R, MINECO/FEDER, UE).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Example of an Innovative Initiative for Education in Thermal Energy Storage: INPATH-TES Project

  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
Following the EC SET-Plan Education and Training Roadmap, the goal of INPATH-TES is to create a network of academia, research institutes and small and medium-sized enterprises (SMEs) to implement a joint PhD programme on Thermal Energy Storage (TES) technologies. The project consortium consists of 22 partners from academia, industry and SMEs from 14 different countries. The final result of such a network is to educate professionals on these technologies for the European research and industry institutions. Some of the main challenges identified so far consist of the development of the programme, the implementation of the programme in each country/institution, and to ensure the continuity of the programme after EU funding ends., The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº 657466 (INPATH-TES). The work is partially funded by the Spanish government ENE2015-64117-C5-1-R (MINECO/FEDER).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

The Event and Implied Situation Ontology (ESO): application and evaluation

  • Segers, Roxane
  • Rospocher, Marco
  • Vossen, Piek
  • Laparra, Egoitz
  • Rigau Claramunt, German
  • Minard, Anne-Lyse
Comunicació presentada a la Tenth International Conference on Language Resources and Evaluation (LREC 2016), celebrada els dies 23 a 28 de maig de 2016 a Portorož, Eslovènia., This paper presents the Event and Implied Situation Ontology (ESO), a manually constructed resource which formalizes the pre and post situations of events and the roles of the entities affected by an event. The ontology is built on top of existing resources such as WordNet, SUMO and FrameNet. The ontology is injected to the Predicate Matrix, a resource that integrates predicate and role information from amongst others FrameNet, VerbNet, PropBank, NomBank and WordNet. We illustrate how these resources are used on large document collections to detect information that otherwise would have remained implicit. The ontology is evaluated on two aspects: recall and precision based on a manually annotated corpus and secondly, on the quality of the knowledge inferred by the situation assertions in the ontology. Evaluation results on the quality of the system show that 50% of the events typed and enriched with ESO assertions are correct., The research for this paper has been partially funded by the European Union 7th Framework Programme NewsReader (FP7-ICT-2011-8-316404) and the Spanish national project TUNER (TIN2015-65308-C5-1-R).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A comparison of domain-based word polarity estimation using different word embeddings

  • García-Pablos, Aitor
  • Cuadros Oller, Montse
  • Rigau Claramunt, German
Comunicació presentada a la Tenth International Conference on Language Resources and Evaluation (LREC 2016), celebrada els dies 23 a 28 de maig de 2016 a Portorož, Eslovènia., A key point in Sentiment Analysis is to determine the polarity of the sentiment implied by a certain word or expression. In basic Sentiment Analysis systems this sentiment polarity of the words is accounted and weighted in different ways to provide a degree of positivity/negativity. Currently words are also modelled as continuous dense vectors, known as word embeddings, which seem to encode interesting semantic knowledge. With regard to Sentiment Analysis, word embeddings are used as features to more complex supervised classification systems to obtain sentiment classifiers. In this paper we compare a set of existing sentiment lexicons and sentiment lexicon generation techniques. We also show a simple but effective technique to calculate a word polarity value for each word in a domain using existing continuous word embeddings generation methods. Further, we also show that word embeddings calculated on in-domain corpus capture the polarity better than the ones calculated on general-domain corpus., This work has been supported by Vicomtech-IK4 and partially funded by TUNER project (TIN2015-65308-C5-1-R).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Optimization of coupled building roof solar reflectance and thermal insulation level for annual energy saving under different climate zones

  • Piselli, Cristina
  • Pisello, Anna Laura
  • Gracia Cuesta, Alvaro de
  • Saffari Tabalvandani, Mohammad
  • Cotana, Franco
  • Cabeza, Luisa F.
The aim of this work is to assess building energy performance optimization potential of cool roof solutions in different climate conditions worldwide through dynamic thermal-energy simulation and optimization analysis. Moreover, given the dependence of roof performance on insulation level, the influence of roof insulation variation on optimum roof solar reflectance is evaluated. Therefore, the multi-dimensional optimization of combined building roof solar reflectance capability and thermal insulation level is carried out to minimize annual energy consumption for air-conditioning of standard ASHRAE building model for small offices, in each considered climate zone. Findings of this research highlight how the classic approach of super-insulated buildings for energy saving needs to be reframed for the office case, by integrating other passive solutions for truly environmentally friendly and comfortable buildings., The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement N°657466 (INPATH-TES). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015-64117-C5-3-R (MINECO/FEDER)). The authors from the University of Lleida would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Anna Laura Pisello’s acknowledgments are due to the UNESCO Chair “Water Resources Management and Culture”, for supporting her research. Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Innovative concentrated solar micro organic Rankine cycle plant system for residential buildings

  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Mahkamov, Khamid
  • Costa, Carolina
  • Kenisarin, Murat
  • Pili, Piero
  • Manca, Roberto
  • Leroux, Arthur
  • Mintsa, André Charles
  • Bartolini, Carlo M.
  • Pirro, Matteo
  • Lynn, Kevin
  • Mullen, David
  • Halimic, Elvedin
  • Cioccolanti, Luca
  • Arteconi, Alessia
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Reducing the energy consumption in the building sector, as well as its associated CO2 emissions, is one of the main environmental concerns at worldwide level. In developed countries, the building sector means 41% of the total energy consumption and 40% of the total greenhouse gases emissions. To improve the energy efficiency of residential buildings, several energy strategies were carried out in European countries to encourage the development of active energy saving systems; such as the solar thermal energy. The presented study is in the frame of the Innova MicroSolar European project, which is sponsored by the European Union’s Horizon 2020 research and innovation programme. The main goal of this project is to develop an innovative concentrated solar heat and power system for residential buildings, which supplies 2-kWelec and 18-kWth. This technology includes a concentrated solar system, a high performance micro organic Rankine cycle (ORC) turbine, and an enhanced latent heat thermal energy storage (LHTES). The solar system is based on linear Fresnel mirrors which are considerably easier and cheaper to manufacture than their parabolic equals. Also, the mirrors are led by a sun tracking mechanism so they are always focusing the absorber tubes, heating up to 295ºC the heat transfer fluid (HTF) flow. The total area of the real scale prototype solar field is 140 square metres, which could provide from 80 to 15 kWth. The micro ORC technology is equipped with a high speed permanent magnet AC alternator able to supply 2.3 kWel. The ORC block has to be fed with 22 kWth. Finally, the TES tank consists of two main blocks, the PCM tank and the enhanced heat sink. Both blocks are connected between them by reversible heat pipes as heat carrier. The storage is designed to supply 25 kWth during four working hours. The whole system will supply 60% of the total building energy demand, reducing the energy cost up to 20%, as well as the greenhouse gases emissions when comparing against the best renewable energy technologies available on the market. This study shows the first experiments of the whole systems. The HTF (Therminol 62) is heated up to 270ºC with the solar field, then the HTF is lead to the ORC evaporator and the organic fluid (cyclopenthane) evaporates and runs the turbine. The TES tank is charged when the solar field reaches maximum power levels. Once the solar production cannot run the ORC, the solar field is bypassed and the TES tank successfully becomes the main energy supplier., The research leading to these results has received funding from the European Union´s Horizon 2020 Research & Innovation Programme under Grant Agreement 723596 with reference name Innova MicroSolar. This work was partially funded by Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). José Miguel Maldonado would like to thank the Spanish Government for his research fellowship (BES-2016-076554). Alvaro de Gracia has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 712949 (TECNIOspring PLUS) and from the Agency for Business Competitiveness of the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Benchmarking of energy demand of domestic and small business buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
Rapid expansion of solar thermal energy for increasing energy efficiency of buildings has been adopted in short/medium and long-term energy strategies of EU countries. This enhancement of energy efficiency in buildings is in line with regional actions with the European climate energy objectives as defined in the European Union’s “20-20-20” targets and in the European Commission’s Energy Roadmap 2050. Within this context, the overall objective of this work is to develop an innovative high performance and cost effective hybrid solar heat and power system, which consist in a novel flat Fresnel mirror solar concentrating collector and micro organic Rankine cycle plant combined with advanced phase change materials as thermal storage, all system managed by smart control units. The initial application is to be implemented in individual dwellings and small business residential buildings for on-site electricity and heat generation using solar thermal energy. It is estimated that the proposed technology will deliver 60% of domestic energy requirements and provide 20% reduction in energy costs and greenhouse gas emissions compared to the best existing low carbon energy technologies. To reach the main objectives, the first step consist in providing information on features of architecture of domestic and small business residential buildings and their annual energy demands for different countries such as: Spain, France Germany, Italy, and United Kingdom. This will include detailed building information of envelopes (walls, roof, lofts, etc.), structure, fabric, and results of energy demands (domestic hot water, space heating and electricity) for the abovementioned countries. This information will be used as input data during the development of this technology as it will point out the potential benefits of the system in different countries, climates, and building typologies., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar) and Nº 657466 (INPATH-TES), from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE). The work is partially funded by the Spanish government ENE2015- 64117-C5-1-R (MINECO/FEDER), ENE2015-64117-C5-3-R (MINECO/FEDER) and (ULLE10-4E-1305). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Corrosion inhibitors for TES material at high temperature for CSP plants

  • Fernández, Ángel G.
  • Cabeza, Luisa F.
Molten salt technology using nitrate salts as thermal energy storage material is the current state-of-the-art of concentrated solar power technology and power tower central receivers are currently limited by the maximum operating temperature of their working fluid. The limit of solar salt (60wt.%NaNO3 + 40wt.%KNO3) thermal stability is around 565°C with ambient air as the cover gas. In order to obtain higher efficiency goals using molten salt technologies working at higher temperatures (e.g., 650°C to 750°C), a different salt chemistry is required for new generation of CSP plants and chlorides molten salts could be a feasible option. Corrosion mitigation could solve the current issues related with the use of chloride salt at high temperature. In this work, the proposal of different corrosion mitigation strategies has been evaluated, as well as the identification of the most corrosive impurities present in the ternary chloride salt composed by MgCl2/KCl/NaCl (60/20/20 mol%). For this purpose, electrochemical impedance spectroscopy tests were carried out at 700°C on austenitic stainless steel (AISI 304) and a Ni base alloy (Inconel 702) during 100 hours. In this case, MgOHCl was identified as the main important corrosive impurity, present in the chloride salt, to control in the storage system. Regarding the materials tested, Ni base alloy (Inconel 702) showed the most promising results for their use as container material., The research leading to these results has received funding from Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group GREiA (2017 SGR 1537). GREiA is a certified agent TECNIO in the category of technology developers from the Government of Catalonia. Angel G. Fernández wants to acknowledge the financial support from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant No 712949 (TECNIOspring PLUS) and from the Agency for Business Competitiveness of the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Phase change material selection for two innovative compact energy storage systems in residential buildings

  • Zsembinszki, Gabriel
  • Gasia, Jaume
  • Oró Prim, Eduard
  • Cabeza, Luisa F.
Within the framework of HYBUILD, an EU Horizon 2020-funded project, two innovative compact hybrid electrical/thermal storage systems for stand-alone and district connected residential buildings will be developed and tested in three demos located in Spain, France, and Cyprus. One of the innovative systems is aimed to be placed in buildings located in Mediterranean climate regions, where cooling loads are dominant, while the other system is intended for Continental climate regions, where the heating demand is dominant. Each system will include, among others components such as a sorption storage system and domestic hot water tanks, a latent thermal energy storage (LTES) system that will be connected to a heat pump through an innovative heat exchanger made of aluminium and filled with phase change material (PCM). In both cases, the heat pump works with electricity provided by a photovoltaic system that is, at the same time, connected to an electrical storage battery. The aim of using the LTES system is to enhance the use of solar energy, which will be translated into a reduction of the building energy consumption and related costs. This study focuses on the selection of the most suitable PCM to be used in each system. On the one hand, the LTES system of the Mediterranean system will be used to store cold to reduce the cooling demand. Taking into account that, according to the design parameters, the heat pump will require a refrigerant evaporation temperature around 2 ºC, and the building cooling system will require water supply in the range from 7 ºC to 12 ºC, the PCM melting temperature range should be within 0 ºC and 7 ºC. On the other hand, the LTES system of the Continental system will be used to store heat to reduce the domestic hot water (DHW) demand. The LTES will be located at the compressor outlet and will be charged by the hot refrigerant that exits the compressor at temperatures as high as 120 ºC. During the discharge process, the heat stored in the LTES will be supplied to the DHW at a temperature in the range between 50 ºC to 55 ºC. As a consequence, the range for the PCM melting temperature investigated in this case should be between 62 ºC and 68 ºC. Besides the melting temperature, other selection criteria considered include the PCM melting enthalpy and melting range, maximum allowed working temperature, density, thermal conductivity, availability, cost, and compatibility with aluminium. To decide the ideal PCM candidate for each system, a decision matrix was defined and used, by applying a weighted score to the selection criteria items according to their importance. The preliminary results indicate that for the Mediterranean system the best candidate is the commercial savE OM3 PCM, while for the Continental system, another commercial product PureTemp 63 is the most adequate option., This work was partially funded by the Ministerio de Economía y Competitividad de España (ENE2015- 64117-C5-1-R (MINECO/FEDER)). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (GREiA 2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. Jaume Gasia would like to thank the Departament d'Universitats, Recerca i Societat de la Informació de la Generalitat de Catalunya for his research fellowship (2018 FI_B2 00100). This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 768824 (HYBUILD)
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

A multilingual predicate matrix

  • Lopez de Lacalle, Maddalen
  • Laparra, Egoitz
  • Aldabe, Itziar
  • Rigau Claramunt, German
Comunicació presentada a la Tenth International Conference on Language Resources and Evaluation (LREC 2016), celebrada els dies 23 a 28 de maig de 2016 a Portorož, Eslovènia., This paper presents the Predicate Matrix 1.3, a lexical resource resulting from the integration of multiple sources of predicate information including FrameNet, VerbNet, PropBank and WordNet. This new version of the Predicate Matrix has been extended to cover nominal predicates by adding mappings to NomBank. Similarly, we have integrated resources in Spanish, Catalan and Basque. As a result, the Predicate Matrix 1.3 provides a multilingual lexicon to allow interoperable semantic analysis in multiple languages., This work has been partially funded by NewsReader (FP7-ICT-2011-8-316404) and TUNER (TIN2015-65308-C5-1-R) projects.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

SemEval-2016 Task 2: Interpretable semantic textual similarity

  • Agirre, Eneko
  • Gonzalez Agirre, Aitor
  • Lopez-Gazpio, Iñigo
  • Maritxalar, Montserrat
  • Rigau Claramunt, German
  • Uria, Larraitz
Comunicació presentada al 10th International Workshop on Semantic Evaluation (SemEval-2016), celebrat els dies 16 i 17 de juny de 2016 a San Diego, Califòrnia., The final goal of Interpretable Semantic Textual Similarity (iSTS) is to build systems that explain which are the differences and commonalities between two sentences. The task adds an explanatory level on top of STS, formalized as an alignment between the chunks in the two input sentences, indicating the relation and similarity score of each alignment. The task provides train and test data on three datasets: news headlines, image captions and student answers. It attracted nine teams, totaling 20 runs. All datasets and the annotation guideline are freely available., This material is based in part upon work supported a MINECO grant to the University of the Basque Country (TUNER project TIN2015-65308-C5-1-R). Aitor Gonzalez Agirre and Inigo Lopez-Gazpio are by doctoral grants from MINECO. The IXA group is funded by the Basque Government (A type Research Group).
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Benchmarking of energy demand of domestic and small business buildings

  • Coma Arpón, Julià
  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Gimbernat, Toni
  • Botargues, Teresa
  • Cabeza, Luisa F.
In Europe the building sector represents 41% of the final energy consumption and the 40% of the total GHG emissions of end-use sectors (Directive 2010/31/EU) [1]. Solar energy is one of the forms of renewable energy that has great potential to enable EU the ambition of 12% of heating coming from renewable sources by 2020 [2]. Within this context, the overall objective of the project Innovative Micro Solar Heat and Power System (Innova MicroSolar) is to develop a high performance and cost effective solar heat and power system, which consist in a novel flat Fresnel mirror solar concentrating collector and micro organic Rankine cycle plant combined with advanced phase change materials as thermal storage, all system managed by smart control units. This technology will be initially implemented in individual dwellings and small business residential buildings for on-site electricity and heat generation using solar thermal energy., This study has received funding from European Union’s Horizon 2020 research and innovation programme under grant agreement Nº723596 (Innova MicroSolar) and Nº 657466 (INPATHTES), from the European Commission Seventh Framework Programme (FP/2007-2013) under grant agreement Nº PIRSES-GA-2013-610692 (INNOSTORAGE). The work is partially funded by the Spanish government (ENE2015-64117-C5-1-R (MINECO/FEDER) and ENE2015- 64117-C5-3-R (MINECO/FEDER)). GREA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2014 SGR 123). Alvaro de Gracia would like to thank Ministerio de Economia y Competitividad de España for Grant Juan de la Cierva, FJCI-2014-19940.
Recercat. Dipósit de la Recerca de Catalunya
Publication Contribución de congreso (ConferenceOutput)

Ensayos preliminares de una microturbina de ciclo orgánico de Rankine alimentada por un campo solar de concentración tipo Fresnel lineala

  • Maldonado, José Miguel
  • Gracia Cuesta, Alvaro de
  • Mahkamov, Khamid
  • Costa, Carolina
  • Kenisarin, Murat
  • Pili, Piero
  • Manca, Roberto
  • Leroux, Arthur
  • Mintsa, André Charles
  • Bartolini, Carlo M.
  • Pirro, Matteo
  • Lynn, Kevin
  • Mullen, David
  • Halimic, Elvedin
  • Cabeza, Luisa F.
El propósito de esta investigación es evaluar la influencia del tipo de cemento en sí mismo a altas temperaturas, desestimando el resto de componentes del hormigón. El presente estudio se centra en la comparación del tratamiento de dos tipos de cemento, a saber, cemento Portland (OPC) y cemento aluminoso (cemento de aluminato de calcio, CAC). Se determina las características físicas y resistencias mecánicas a compresión. A pesar de la resistencia a altas temperaturas del CAC y la baja relación agua/cemento (a/c) utilizada, este tipo de pasta de cemento requiere de un curado inminente. Si tal hidratación no se ejecuta en sus primeras edades, la pasta de CAC muestra un comportamiento similar a la pasta de OPC, desaprovechando tanto sus características refractarias como sus altas resistencias mecánicas iniciales., The purpose of this investigation is to evaluate the influence of cement type itself, at high temperatures, disregarding the rest of the concrete components. The present study focuses on the treatment comparison of two cement types, known as, ordinary Portland cement (OPC) and calcium aluminate cement (CAC). The physical characteristics and compressive strength are determined. Despite the resistance to high temperatures of the CAC and the low water/cement (w/c) ratio used, this type of cement paste requires an imminent cure at certain temperature. If such hydration is not carried out in its early ages, the CAC paste shows a behavior similar to OPC paste, wasting both its refractory characteristics and its high initial mechanical resistances., Este trabajo ha sido parcialmente financiado el programa de Investigación y Desarrollo H2020 de la Unión Europea, a través del Grant Agreement 723596, cuyo nombre de referencia es Innova MicroSolar. Este trabajo ha sido cofinanciado por el Ministerio de Economía y Competitividad de España (ENE2015-64117-C5-1-R (MINECO/FEDER) y ENE2015-64117-C5-3-R (MINECO/FEDER)). Los autores quieren agradecer al Gobierno de Cataluña por la acreditación de calidad otorgada a su grupo de investigación (2017 SGR 1537). GREA es un agente TECNIO certificado en la categoría de desarrolladores tecnológicos por el Gobierno de Cataluña. José Miguel Maldonado agradece al Gobierno de España la concesión de la ayuda para contratos predoctorales para la formación de doctores (BES-2016-076554). Alvaro de Gracia agradece los fondos recibidos del programa de Investigación y Desarrollo H2020 de la Unión Europea, a través del Marie Sklodowska-Curie Grant Agreement No 712949.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Contribución de congreso (ConferenceOutput)

Evaluating Dynamic Wireless Charging of electric vehicles moving along a stretch of highway

  • García Vázquez, Carlos Andrés
  • Llorens Iborra, Francisco
  • Fernández Ramírez, Luis Miguel
  • Sánchez Sainz, Higinio
  • Jurado, Francisco
Electric vehicles are the most promising sustainable transport technology for solving the environmental, economic and social problems associated to the internal combustion engine vehicles. The research and development of new charging methods is necessary for a further integration of electric vehicles in transport sector. Inductive power transfer is the most promising technology for dynamic wireless charging of electric vehicles, which can be used to supply the motors and/or charge the battery of the electric vehicle while it is moving. This charging system can help to reduce the size and cost of the battery, increase the driving range and expand the use of electric vehicles. This paper presents an analysis methodology of a Dynamic Wireless Charging system applied to evaluate the power and energy requirements for charging electric vehicles moving along a stretch of the A-381 Highway in Cádiz (Spain). The study shows the great dependency of the energy transferred to the electric vehicles with the speed and the great variability of power and energy requirements related to the daily traffic., This work was partially funded by the Spanish Ministry of Economy and Competitiveness (Grant ENE2013-46205-C5-1-R).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Contribución de congreso (ConferenceOutput)

Modelling and control of a medium-voltage DC distribution system with energy storage

  • Sarrias-Mena, Raúl
  • Fernández-Ramírez, Luis M.
  • García-Vázquez, Carlos Andrés
  • Ugalde-Loo, Carlos E.
  • Jenkins, Nick
  • Jurado, Francisco
Electric power systems will need to accommodate large amounts of renewables and a growing number of DC loads with reduced costs and losses. Medium-voltage DC distribution lines can play a key role. Moreover, a higher availability and reliability of the power supply can be achieved with energy storage systems (ESSs). In this paper, a hybrid configuration merging both concepts is evaluated. A medium-voltage DC distribution system with an integrated ESS has been proposed, modelled, and simulated. Voltage source converters have been used for the AC/DC conversions. The ESS is connected to the DC bus through a dual active bridge enabling bidirectional power flow while covering a large voltage gap. The controllers for all converters and a supervisory control scheme have been implemented. Simulations show the capability of the hybrid configuration to fulfill variable grid demand regardless of the wind power generation, thus transforming a fluctuating source into a dispatchable supply.