Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 217
Encontrada(s) 3 página(s)

Docta Complutense
Publication Artículo científico (JournalArticle)

Correction: Feasibility study of a SiPM-fiber detector for non-invasive measurement of arterial input function for preclinical and clinical positron emission tomography

  • de Scals, Sara
  • Fraile Prieto, Luis Mario
  • Udías Moinelo, José Manuel
  • Cortés, Laura Martínez
  • Oteo, Marta
  • Morcillo, Miguel Ángel
  • Carreras-Delgado, José Luis
  • Carreras Delgado, José Luis
  • Cabrera Martín, María Nieves
  • España Palomares, Samuel
Correction: EJNMMI Phys11, 12 (2024). https://doi.org/10.1186/s40658-024-00618-2 Following publication of the original article [1], the authors requested to update the Funding section. The original Funding sections was: This work was funded by the Universidad Complutense de Madrid under Project PR27/21 − 009 and by the Ministerio de Ciencia e Innovación under Project TED2021-129933B-C21. S. España is supported by the Ministerio de Ciencia, Innovación y Universidades under Ayudas Ramón y Cajal RYC2018-024495-I. The CNIC is supported by the Instituto de Salud Carlos III (ISCIII), the MCIN and the Pro CNIC Foundation, and is a Severo Ochoa Center of Excellence (Grant CEX2020-001041-S funded by MICIN/AEI/https://doi.org/10.13039/501100011033). The correct Funding section should read: This work is part of the Project TED2021-129933B-C21 funded by the MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/ PRTR as well as by the Universidad Complutense de Madrid under Project PR27/21-009. S. España is supported by the Ministerio de Ciencia, Innovación y Universidades under Ayudas Ramón y Cajal RYC2018-024495-I. The CNIC is supported by the Instituto de Salud Carlos III (ISCIII), the MCIN and the Pro CNIC Foundation, and is a Severo Ochoa Center of Excellence (Grant CEX2020-001041-S funded by MICIN/AEI/10.13039/501100011033). The original article [1] has been updated.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

The stratigraphic biography of an archaeological site. Timing depositional events

  • Andreaki, Vasiliki|||0000-0002-1381-2994
  • Barceló, Juan A.|||0000-0002-1580-471X
The stratigraphic sequence of an archaeological site constitutes its biography, which details what was deposited, when it was deposited, and how the deposition occurred. However, many current methods of recording archaeological stratigraphy do not allow for a full reconstruction of a site's biography. This paper introduces a theoretical framework for analysing a site's formation and deformation processes, emphasizing the integration of different temporal, spatial, geological, and archaeological information elements. This approach offers a way to study change and dynamics by deciphering successive episodes, depositional events, their temporal and causal ordering, and, when possible, the speed and rhythm of such depositions. The integration of micromorphological data and absolute dating can increase the chronological resolution of a site's biography by formally defining the temporal boundaries of depositional events. Additionally, the use of multidimensional geometric analysis of occupational floors and sedimentary volumes enhances the understanding of the complex relationships between stratigraphic depth and temporality. These tools enable archaeologists to create multidimensional visualizations, make inferences, and enhance interpretations of archaeological sites.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ulnar morphology of Pliobates cataloniae (Pliopithecoidea: Crouzeliidae), Insights into catarrhine locomotor diversity and forelimb evolution

  • Raventos-Izard, Georgina|||0000-0001-6536-0363
  • Monclús Gonzalo, Oriol|||0000-0002-7046-9387
  • Moyà Solà, Salvador|||0000-0001-8506-1061
  • Alba, David M.|||0000-0002-8886-5580
  • Arias-Martorell, Julia|||0000-0001-8110-2946
Pliobates cataloniae is a small-bodied crouzeliid pliopithecoid from the Miocene (∼11.6 Ma) of Abocador de Can Mata (ACM; Vallès-Penedès Basin, NE Iberian Peninsula). It exhibits a mosaic of primitive (stem catarrhine) and derived (modern hominoid-like) postcranial features. The holotype partial skeleton, from locality ACM/C8-A4, includes an almost complete ulna-a bone that plays a critical role in forearm flexion-extension and pronation-supination. Here, we use landmark-based three-dimensional geometric morphometrics to evaluate the closest morphometric affinities of the Pliobates ulna and explore its implications for the locomotor repertoire of this taxon. The comparative sample includes 156 specimens corresponding to 35 species from 20 anthropoid genera, three lorisid genera, and 10 fossil catarrhines. Our results indicate that the trochlear notch morphology of Pliobates resembles that of stem catarrhines and other nonhominoid primates. However, Pliobates differs from cercopithecoids (especially terrestrial taxa) in radial notch features related to enhanced pronation-supination capabilities, closely resembling the condition displayed by crown hominoids, Ateles, and Loris. In turn, the distal ulna of Pliobates does not overlap with any extant group and differs from the other fossils analyzed, most closely resembling that of hylobatids and lorisids. Pliobates probably had an extensive range of movement in the distal forearm, as indicated by the incipiently expanded semilunar ulnar head, the relatively short styloid process, the deep fovea, and the hooklike styloid process. This suggests that Pliobates would have frequently displayed nonstereotypical limb postures and slow locomotor behaviors. Overall, the ulnar morphology of Pliobates suggests that its locomotor repertoire may have combined cautious above-branch quadrupedalism and eclectic climbing with nonagile suspensory behaviors resembling those of Ateles.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Targeted knockdown of ATM, ATR, and PDEδ increases Gag HIV-1 VLP production in HEK293 cells

  • Díaz-Maneh, Andy|||0000-0002-5259-8070
  • Pérez-Rubio, Pol|||0000-0002-9892-6762
  • Rigau Granes, Cristina
  • Bosch Molist, Laia|||0000-0002-9970-0490
  • Lavado-García, Jesús|||0000-0001-9993-6332
  • Gòdia, Francesc|||0000-0002-4060-9887
  • Cervera Gracia, Laura|||0000-0002-3639-2793
Several strategies have been developed in recent years to improve virus-like particle (VLP)-based vaccine production processes. Among these, the metabolic engineering of cell lines has been one of the most promising approaches. Based on previous work and a proteomic analysis of HEK293 cells producing Human Immunodeficiency Virus-1 (HIV-1) Gag VLPs under transient transfection, four proteins susceptible of enhancing VLP production were identified: ataxia telangiectasia mutated (ATM), ataxia telangiectasia and rad3-related (ATR), DNA-dependent protein kinase catalytic subunit (DNA-PKcs), and retinal rod rhodopsin-sensitive cGMP 3',5'-cyclic phosphodiesterase subunit delta (PDEδ). The knockdown of ATM, ATR, and PDEδ in HEK293 cells increased HIV-1 VLP titers in the supernatant by 3.4-, 2.1-, and 2.2-fold, respectively. Also, possible metabolic synergies between plasmids were investigated by statistical design of experiments (DoE), enabling us to identify the optimal production strategy, that was further demonstrated at lab-scale stirred tank bioreactor operated in perfusion, significantly increasing both VLPs specific and volumetric productivities to 8.3 × 103 VLPs/cellxday and 7.5 × 1012 VLPs/Lxday, respectively.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A review on Pyrenean Pleistocene leopards paleoecology, paleobiogeography and adaptative convergences with snow leopards

  • Prat Vericat, Maria|||0000-0002-0771-7122
  • Marciszak, Adrian|||0000-0002-1472-6553
  • Bartolini-Lucenti, Saverio|||0000-0003-1280-5378
  • Fidalgo, Darío|||0000-0003-3646-4272
  • Rufí Casals, Isaac|||0000-0003-3658-0900
  • Tura Poch, Clàudia
  • Vizcaíno-Varo, Víctor|||0000-0001-8312-7186
  • Jovells Vaqué, Sílvia|||0000-0003-0358-0840
  • Ramada, Nil
  • Díez-Canseco, Celia|||0000-0003-0221-745X
  • Gelabert, Pere|||0000-0003-3019-0725
  • Tornero Dacasa, Carlos Alberto|||0000-0002-2870-8989
  • Terradas, Xavier|||0000-0002-8000-5607
  • Rook, Lorenzo|||0000-0001-8923-5428
  • Madurell-Malapeira, Joan|||0000-0003-4639-9451
In this study, we review and analyze one of the most scarcely recorded carnivorans of the European Quaternary, the leopard (Panthera pardus), focusing on its presence in the Pyrenean Mountain range. Our data reveal a progressive increase in both the number of records and the body mass of leopards throughout the Pleistocene, beginning with the earliest specimens from the Early Pleistocene. Our analysis also demonstrated reduced sexual dimorphism compared to modern leopards, as well as a preference for mountain environments. Additionally, we identified several cranial and post-cranial anatomical convergences with snow leopards, which were also sporadically recorded in Europe. These convergences, discussed in detail, may be the result of interspecific competition, environmental pressures, or habitat preferences.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Early Pliocene barb (Teleostei, Cyprinidae, Barbinae) from the Camp dels Ninots site (Spain)

  • Prikryl, Tomás|||0000-0002-7939-3622
  • Blain, Hugues-Alexandre|||0000-0002-9920-2707
  • Oms, Oriol|||0000-0001-8355-847X
  • Rodríguez-Salgado, Pablo|||0000-0002-1338-1477
  • Moreno-Ribas, Elena|||0000-0002-0947-6457
  • Agustí, Jordi|||0000-0002-7240-1992
  • Campeny Vall-llosera, Gerard|||0000-0002-3635-5423
  • Gómez de Soler, Bruno|||0000-0002-2539-3811
The Pliocene site of Camp dels Ninots (Caldes de Malavella, NE Spain) is considered a Konservat-Lagerstätte due to the remarkable preservation of its macro and microvertebrate record, along with floral remains such as leaf imprints and seeds. Its lacustrine deposits, dated to the Early Pliocene, have provided a number of semi-articulated and isolated remains of middle to large sized cyprinid fish, apparently belonging to subfamily Barbinae. These specimens allow recognize a number of skeletal characters, including specific morphology of the pharyngeal dentition and denticulation at the posterior side of the last unbranched dorsal fin ray. The latter character is well di-scernable in smaller individuals, while in the larger specimens the denticulation is lost. These features, together with general osteological characterization, allow to classify the specimens under consideration to the species Luciobarbusgraellsii (Steindachner, 1866b), or to a closely related form morphologically non discernable from the latter. Fish of the Luciobarbus graellsii species is typical native barb inhabitant of today North-Eastern Iberian Peninsula. The specimens excavated in the Camp dels Ninots documents its earliest and first known fossil record. Inferences for the Pliocene palaeogeography of the region as well as the palaeoecology of the species is discussed. This new fossil record en-larges the known environmental requirements of the species (as it manage to survive from the warmest period of the Pliocene to the coldest period of the Pleistocene) and documents its early abilities to disperse in peculiar aquatic environment (i.e., maars). A brief overview of the fossil record barbs from Central, Western and Southern Europe is provided.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

An unexpected Scalopini mole (Talpidae, Mammalia) from the Pliocene of Europe sheds light on the phylogeny of talpids

  • Linares Martín, Adriana|||0000-0002-1907-7521
  • Furió, Marc|||0000-0002-4582-3268
  • Gómez de Soler, Bruno|||0000-0002-2539-3811
  • Agustí, Jordi|||0000-0002-7240-1992
  • Oms, Oriol|||0000-0001-8355-847X
  • Grandi, Federica|||0000-0001-5865-5366
  • Blain, Hugues-Alexandre|||0000-0002-9920-2707
  • Moreno-Ribas, Elena|||0000-0002-0947-6457
  • Piñero, Pedro|||0000-0002-5626-2777
  • Campeny Vall-llosera, Gerard|||0000-0002-3635-5423
The Pliocene Konservat-Lagerstätten maar lake site of Camp dels Ninots (NE Iberian Peninsula) has recently delivered a partial skeleton of a mole (family Talpidae) with many elements in anatomical connection. At a first glance, molar and humerus size, geological time interval, and geographical location suggested that this specimen could correspond to Talpa minor. However, after some mechanical preparation of the clay block (matrix removal, consolidation, and cleaning) and a micro-CT scan, this excellently preserved specimen turned out to be an unknown species to science. The resulting 3D models of this new form, Vulcanoscaptor ninoti gen. et sp. nov., revealed some peculiar morphological traits in teeth, mandible, and postcranial elements, which according to the phylogenetic analysis carried out, would allocate this new species within the tribe Scalopini. This is surprising, because the closest relatives of the new species within this tribe live nowadays in North America, and only some related taxa had been previously reported in the Oligocene and Miocene fossil record from Europe. The postcranial construction of this specimen reveals a highly fossorial lifestyle supported by a complex forelimb structure. How such a specialized digging animal reached the maar lake sediments where it was finally preserved is still to be solved. Some hypotheses consider swimming abilities for this extinct species. Alternatively, this specimen could be the remaining portions of a floated or scavenged carcass whose remains fell into the lake and reached the anoxic bottom.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Proof-of-Concept for Cell Culture-Based Duck Fat Production on a Laboratory Scale

  • Díaz-Maneh, Andy|||0000-0002-5259-8070
  • Camacho Sucarrats, Andreu|||0009-0004-8329-4469
  • Fuenmayor, J.|||0000-0002-6254-8034
  • Ilic, Natasa|||0000-0001-5987-2805
  • García Aranda, Natalia|||0000-0003-3230-9881
  • Enciso, Yuliana
  • Notari, Mario|||0000-0001-7695-4415
  • Gòdia, Francesc|||0000-0002-4060-9887
  • Lavado-García, Jesús|||0000-0001-9993-6332
  • Revilla-Sánchez, Raquel|||0000-0003-3115-2587
Cultured meat has been gaining ground in recent years as an innovative approach to address the potential scarcity of meat supply. Fat is one of the key components of meat in terms of flavor and juiciness. However, the production and scale-up of fat from agriculturally relevant animals have not been extensively investigated, particularly in scalable bioreactor systems. The culture of primary duck embryonic fibroblast (DEF) proliferation and adipogenesis in various lab-scale bioreactors for cultured meat purposes was explored. Cytodex 1 microcarriers were used to culture DEF in two proprietary serum-free media: ProDuck4.0 for proliferation and LipoDuck2.0 for adipogenesis. Proliferation and differentiation conditions of DEF were optimized in shake flasks through Design of Experiments (DoE) and then the culture was transferred to lab-scale bioreactors operating in perfusion with different agitation regimes. A rocking motion bioreactor (RMB), an orbitally shaken bioreactor (OSB), and a stirred tank bioreactor (STB) were assessed to scale up the production process. Results showed that DEFs exhibited high sensitivity to shear stress, particularly in RMB and OSB systems, which led to impaired cell growth. In contrast, STB supported DEF proliferation and adipogenic differentiation, reaching full confluency and a cell concentration of 489,000 cells·mL and an intracellular triglyceride accumulation of 380 pg·cell, comparable to those achieved in shake flasks. These findings highlight the potential of using STBs for scaling up duck fat production for cultured meat applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Re-thinking the preservation biases impacting the Neolithic plant record in the Iberian Peninsula, insights from La Draga (Banyoles, Spain)

  • Garay Palacios, Blanca|||0000-0003-3576-8784
  • Antolín, Ferran|||0000-0002-0533-5788
  • Barberà Berrocal, Anna|||0000-0003-4379-5635
  • Palomo Pérez, Antoni|||0000-0001-9954-7310
  • Piqué Huerta, Raquel|||0000-0002-8253-6874
  • Terradas, Xavier|||0000-0002-8000-5607
  • Berihuete Azorin, Marian|||0000-0002-6248-1562
Seeds and fruits are frequently recovered at archaeological sites in the Iberian Peninsula, mainly preserved in a charred state. Plant assemblages recovered from waterlogged and desiccated contexts show that charring leads to a biased representation of certain taxa, as not all plants are equally likely to become charred or survive charring. For instance, wild fruits rarely require processing and are often eaten raw, so their presence in the record is usually minimal. The archaeobotanical record of the Neolithic period in the Iberian Peninsula is mainly composed of charred cereals (at least in terms of absolute numbers) but does their abundance reflect actual usage or is a preservation bias? La Draga settlement (Banyoles, Spain) (5300-4700 cal bce) has been excavated in several sectors located at different levels relative to the water table. This leads to varied preservation conditions: some areas mainly contain charred organic materials, while others preserve abundant waterlogged remains. The waterlogging of the archaeobotanical assemblage allows a wider range of taxa to be preserved, thereby enabling a more detailed and comprehensive reconstruction of economic activities. Now, based on the results from the studied sectors and new data from waterlogged sector B, we aim to emphasise the importance of this lakeshore site to reconstruct the full plant spectrum used by Neolithic farmers. We also highlight the need to continue exploring new areas as we gain further insights. Overall, this study shows that the variability in preservation at La Draga is key to identifying and interpreting biased taxon representation, contributing to broader discussions on taphonomy and subsistence reconstruction in prehistoric wetland sites.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Keeping the fire alive, a regional and diachronic study of firewood collection in the south Central Pyrenees

  • Obea Gómez, Laura|||0000-0003-4512-8473
  • Gassiot Ballbè, Ermengol|||0000-0003-0457-4805
  • Piqué Huerta, Raquel|||0000-0002-8253-6874
  • Martín-Seijo, María|||0000-0003-2924-7763
  • López-Bultó, Oriol|||0000-0001-5327-1881
A research developed over the last 25 years in different high mountain areas of the Pyrenees has confirmed continuous human occupation of these areas over time. Of the various economic activities carried out in these areas, livestock farming is particularly notable. Thanks to extensive excavations, the daily activities that sustained and promoted the well-being of the area's inhabitants are increasingly well documented. Notably, the collection and use of fuel for households sheds light on the relationships that societies established with their environ- ment. In this diachronic, regional-scope study we have unified all available anthracological records for dwelling sites in the southern Central Pyrenees dating from the 9th millennium BCE in a single database. A total of 34 taxa have been identified, although only a few were probably used as the main fuel. Changes and continuities detected over time are related to both the altitude of the site and the historical dynamics of land use in the area.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

First of a line or last of a dynasty? Parabos tigneresi and the evolution of eurasian bovinae in the early pliocene

  • Sorbelli, Leonardo|||0000-0002-3246-5887
  • Bibi, Faysal|||0000-0002-9414-5547
  • Madurell-Malapeira, Joan|||0000-0003-4639-9451
  • Grandi, Federica|||0000-0001-5865-5366
  • Moreno-Ribas, Elena|||0000-0002-0947-6457
  • Oms, Oriol|||0000-0001-8355-847X
  • Campeny Vall-llosera, Gerard|||0000-0002-3635-5423
  • Gómez de Soler, Bruno|||0000-0002-2539-3811
The Early Pliocene maar deposits of Camp dels Ninots (Catalonia, NE Iberia) have produced an exceptionally well-preserved fossil assemblage. Among the large mammals, a large bovid stands out, represented by 14 individuals, including 8 nearly complete and partially articulated skeletons. Here we provide a comprehensive description and systematic evaluation of this material, previously referred to Alephis tigneresi, including an in-depth comparison with specimens assigned to Parabos, Alephis, and other large Late Miocene and Early Pliocene Eurasian and African bovids. We revise the genera Alephis and Parabos, recognizing five valid species across both groups, and refer the Camp dels Ninots bovid to Parabos tigneresi. We further explore the possible relationships of Parabos and Alephis within Bovinae, finding that they could either be the earliest European representatives of stem Bovini or among the last surviving members of the Miocene Tragoportacini radiation. Additionally, the exceptionally preserved skeletons of P. tigneresi provide paleoecological evidence of adaptation to humid, vegetated environments, confirming reconstruction of the paleoenvironment of the Camp dels Ninots maar lake, while also showing traits associated with mixed to open habitats, suggesting potentially broad habitat preferences for P. tigneresi.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A new species of Paludocyon (Carnivora: Amphicyonidae) from the early Middle Miocene of els Casots (Vallès-Penedès Basin, Barcelona, Spain)

  • Morales, Jorge|||0000-0001-5170-5754
  • Abella, Juan|||0000-0002-3433-6093
  • Valenciano Vaquero, Alberto|||0000-0003-1633-2248
  • Gamarra González, Jesús|||0000-0002-9474-2317
  • Robles Gimenez, Josep Maria|||0000-0002-5410-3529
  • Gregori, Maria|||0000-0003-2845-9238
  • Alba, David M.|||0000-0002-8886-5580
  • Casanovas i Vilar, Isaac|||0000-0001-7092-9622
The early Middle Miocene (15.9 Ma) site of els Casots (Vallès-Penedès Basin, Catalonia, Spain) has yielded a rich vertebrate assemblage, including abundant carnivoran remains that mostly remain unpublished. Here we describe a new species of the amphicyonid genus Paludocyon based on a compressed cranium with well-preserved teeth and an isolated lower molar (m2) from els Casots. Paludocyon moyasolai sp. nov., included in the subfamily Amphicyoninae, is characterized by a notably enlarged M2, which is buccolingually broader than the M1, and by a the relatively large size of the M3, both traits being absent in other species of Paludocyon. A phylogenetic analysis, conducted on European and North American species assigned to Cynelos and Paludocyon, indicates that Cynelos is paraphyletic but supports the monophyly of Paludocyon, with the new species being recovered as its basal-most member.
Repisalud
Publication Artículo científico (JournalArticle)

Feasibility study of a SiPM-fiber detector for non-invasive measurement of arterial input function for preclinical and clinical positron emission tomography.

  • de Scals, Sara
  • Fraile, Luis Mario
  • Udías, José Manuel
  • Martínez Cortés, Laura
  • Oteo, Marta
  • Morcillo, Miguel Ángel
  • Carreras-Delgado, José Luis
  • Cabrera-Martín, María Nieves
  • España, Samuel
Pharmacokinetic positron emission tomography (PET) studies rely on the measurement of the arterial input function (AIF), which represents the time-activity curve of the radiotracer concentration in the blood plasma. Traditionally, obtaining the AIF requires invasive procedures, such as arterial catheterization, which can be challenging, time-consuming, and associated with potential risks. Therefore, the development of non-invasive techniques for AIF measurement is highly desirable. This study presents a detector for the non-invasive measurement of the AIF in PET studies. The detector is based on the combination of scintillation fibers and silicon photomultipliers (SiPMs) which leads to a very compact and rugged device. The feasibility of the detector was assessed through Monte Carlo simulations conducted on mouse tail and human wrist anatomies studying relevant parameters such as energy spectrum, detector efficiency and minimum detectable activity (MDA). The simulations involved the use of F and Ga isotopes, which exhibit significantly different positron ranges. In addition, several prototypes were built in order to study the different components of the detector including the scintillation fiber, the coating of the fiber, the SiPMs, and the operating configuration. Finally, the simulations were compared with experimental measurements conducted using a tube filled with both F and Ga to validate the obtained results. The MDA achieved for both anatomies (approximately 1000 kBq/mL for mice and 1 kBq/mL for humans) falls below the peak radiotracer concentrations typically found in PET studies, affirming the feasibility of conducting non-invasive AIF measurements with the fiber detector. The sensitivity for measurements with a tube filled with F (Ga) was 1.2 (2.07) cps/(kBq/mL), while for simulations, it was 2.81 (6.23) cps/(kBq/mL). Further studies are needed to validate these results in pharmacokinetic PET studies.
Repisalud
Publication Artículo científico (JournalArticle)

Toll-like receptor 8 (TLR8) polymorphisms are associated with non-progression of chronic hepatitis C in HIV/HCV coinfected patients

  • Fernandez-Rodriguez, Amanda
  • Berenguer, Juan
  • Jimenez-Sousa, Maria Angeles
  • Garcia-Alvarez, Monica
  • Aldámiz-Echevarria, Teresa
  • Pineda-Tenor, Daniel
  • Díez, Cristina
  • De la Barrera, Jorge
  • Bellón, José María
  • Briz, Veronica
  • Resino, Salvador
Toll-like receptor 8 (TLR8) polymorphisms have been related to hepatitis C virus (HCV) infection. The aim was to estimate the association of TLR8 polymorphisms with HCV-related outcomes in HIV/HCV coinfected patients. We performed a cross-sectional study of 220 patients who underwent a liver biopsy. TLR8 polymorphisms were genotyped using GoldenGate® assay. The outcome variables were non-fibrosis (F0), mild-inflammation (A0/A1), and non-steatosis [fatty hepatocytes (FH) <10%]. Logistic regression analysis was used to compare the outcome variables according to TLR8 polymorphisms. Four polymorphisms were analyzed (rs1013151, rs5744069, rs17256081 and rs3764880rs1013151). Female patients had higher frequency of TLR8 major alleles at rs17256081 and rs101315, and minor alleles at rs3764880 and rs5744069. Male patients had higher frequency of TLR8 minor alleles except for rs3764880, where major alleles were higher (p<0.01). Two TLR8 polymorphisms (rs1013151 and rs5744069) were significantly associated with non-fibrosis (F0) [adjusted odds ratio (aOR)=4.42 (95% of confidence interval (95%CI)=1.54; 12.68) (p=0.006) and aOR=4.76 (95%CI=1.69; 13.37) (p=0.003); respectively]. When data were stratified by gender, rs1013151 and rs5744069 polymorphisms remained significant for male patients [adjusted odds ratio (aOR)=4.49 (95%CI=1.08; 18.62) (p=0.039) and aOR=6.17 (95%CI=1.45; 26.20) (p=0.014); respectively]. When data were stratified by major HCV genotypes, patients infected with HCV genotype 1 (GT1) had significant values for both rs1013151 and rs5744069 polymorphisms [aOR=5.79 (95%CI=1.44; 23.32) (p=0.013) and aOR=8.01 (95%CI=2.16; 35.65) (p=0.005); respectively]. Finally, none of the TLR8 polymorphisms were significantly associated with mild-inflammation or non-steatosis. In conclusion, TLR8 polymorphisms seem to be related to non-progression of liver fibrosis in HIV/HCV coinfected patients, particularly in males and those patients infected with GT1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Selective contacts drive charge extraction in quantum dot solids via asymmetry in carrier transfer kinetics

  • Mora-Sero, Iván
  • Bertoluzzi, Luca
  • González-Pedro, Victoria
  • Gimenez, Sixto
  • Fabregat-Santiago, Francisco
  • Kemp, Kyle W.
  • Sargent, Edward H.
  • Bisquert, Juan|||0000-0003-4987-4887
[EN] Colloidal quantum dot solar cells achieve spectrally selective optical absorption in a thin layer of solution-processed, size-effect tuned, nanoparticles. The best devices built to date have relied heavily on drift-based transport due to the action of an electric field in a depletion region that extends throughout the thickness of the quantum dot layer. Here we study for the first time the behaviour of the best-performing class of colloidal quantum dot films in the absence of an electric field, by screening using an electrolyte. We find that the action of selective contacts on photovoltage sign and amplitude can be retained, implying that the contacts operate by kinetic preferences of charge transfer for either electrons or holes. We develop a theoretical model to explain these experimental findings. The work is the first to present a switch in the photovoltage in colloidal quantum dot solar cells by purposefully formed selective contacts, opening the way to new strategies in the engineering of colloidal quantum dot solar cells., We thank the following agencies for support of this research: Ministerio de Educacion y Ciencia under project HOPE CSD2007-00007, Generalitat Valenciana (ISIC/2012/008) and Universitat Jaume I project 12I361.01/1. EHS and KWK acknowledge the Award KUS-11-009-21, made by King Abdullah University of Science and Technology (KAUST) and the International Cooperation of the Korea Institute of Energy Technology Evaluation and Planning (KETEP) grant funded by the Korea government Ministry of Knowledge Economy (2012T100100740).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electron Channeling Contrast Imaging for the Characterization of Dislocations in III-V Thin Films on Silicon (001)

  • Monge-Bartolome, Laura
  • Mouriño-Miñambres, Paula|||0009-0003-6511-1246
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
  • Peiro Codoñer, Alicia
  • Yan, Zhao
  • Garcia Vara, Ivan
  • Baron, Thierry
  • Li, Qiang
[EN] Characterization of defects is essential for the semiconductor industry, as they can be detrimental to device performance. Electron channeling contrast imaging(ECCI) is an electron diffraction technique performed in a scanning electron microscope that has emerged as a fast and nondestructive technique for defect characterization. Herein, ECCI is applied to the characterization of extended defects in the heteroepitaxy of III¿V semiconductor thin ¿lms on silicon. Thein¿uence of the electron-beam parameters (beam energy and current) is studied to optimize the ECCI micrographs. Additionally, the in¿uence of the diffraction condition on the visibility and contrast of two types of extended defects¿threading dislocations and stacking faults¿is studied. Moreover, the in¿uence of the diffraction conditions on the density of extended defects measured in the ECCI micrographs is studied, giving a lower limit of the extended defects density. This work shows that ECCI is a promising technique for deep study of extended defects in the heteroepitaxy of III¿V semiconductor thin ¿lms on Si, revealing a huge potential for wafer mapping, which is crucial for homogeneity testing and scalability., This work was supported in part by the project Zero-loss Energy harvesting Using nanowire solar cells in Space , funded by the European Union, Horizon Europe, EIC Project 101161465 (ZEUS). M.S.L. acknowledges financial support from the Generalitat Valenciana (Project: CIAPOS/2021/293). L.M.B. acknowledges Ayuda a Primeros Proyectos de Investigación (PAID-06-24), Vicerrectorado de Investigación de la Universitat Politècnica de València (UPV). V.J.G. acknowledges the Generalitat Valenciana (CDEIGENT/2020/009, and ESGENT/2024/17), the Conselleria de Educación, Universidades y Empleo under the NIRVANA Grant (PROMETEO Program, CIPROM/2022/14), and to the AGENCIA ESTATAL DE INVESTIGACIÓN of Ministerio de Ciencia, Innovacion y Universidades Grant CNS2023-145093 funded by MICIU/AEI/10.13039/ 501100011033 and by European Union NextGenerationEU/PRTR . All authors acknowledge AGENCIA ESTATAL DE INVESTIGACIÓN of Ministerio de Ciencia e Innovacion (PID2024-162261NB-I00 and EQC2021- 007244-P) and to the European Regional Development Fund (ERDF) (IDIFEDER/2020/041, IDIFEDER/2021/061), and the Quantum Communications program supported by Ministerio de Ciencia e Innovacion (MCIN) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (COMCUANTICA/003).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Computational modelling with uncertainty of frequent users of e-commerce in Spain using an age-group dynamic nonlinear model with varying size population

  • Burgos-Simon, Clara|||0000-0001-6385-4263
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Martínez-Rodríguez, David|||0000-0002-2093-7840
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
[EN] Electronic commerce (EC) has numerous advantages. It allows saving time when we purchase an item, offers the possibility of review without depending on the schedules of traditional stores, access to a wider variety and quantity of articles, in many cases, with lower prices, etc. Based upon mathematical epidemiology tenets strongly related to social behavior able to describe the influence of peers, in this paper we propose an age-group dynamic model with population varying size based on a system of difference equations to study the evolution of the frequent users of EC over time in Spain. Using data from surveys retrieved from the Spanish National Statistics Institute, we use and design computational algorithms to perform a probabilistic estimation of the model parameters that allow the model output to capture the data uncertainty. Then, we will be able to perform a precise prediction with uncertainty., This work has been partially supported by the Ministerio de Economia y Competitividad grant MTM2017-89664-P and by the European Union through the Operational Program of the European Regional Development Fund (ERDF)/European Social Fund (ESF) of the Valencian Community 2014-2020, grants GJIDI/2018/A/009 and GJIDI/2018/A/010.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Optomechanical Cavities Based on Epitaxial GaP on Nominally (001)-Oriented Si

  • Mouriño-Miñambres, Paula|||0009-0003-6511-1246
  • Mercadé, Laura|||0000-0002-4994-7727
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Resta-López, Raquel|||0009-0007-8657-0782
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
  • Ben Saddik, Karim
  • Barrigón, Enrique
  • Fernández-Garrido, Sergio
  • García, Basilio Javier
[EN] Gallium Phosphide (GaP) has recently received considerable attention as a suitable material for building photonic integrated circuits due to its remarkable optical and piezoelectric properties. Usually, GaP is grown epitaxially on III-V substrates to keep its crystallinity and later transferred to silicon wafers for further processing. Here, an alternative promising route for the fabrication of optomechanical (OM) cavities on GaP epitaxially grown on nominally (001)-oriented Si is introduced by using a two-step process consisting of a low-temperature etching of GaP followed by selective etching of the underneath silicon. The low-temperature (-30 degrees C) during the dry-etching of GaP hinders the lateral etching rate, preserving the pattern with a deviation between the design and the pattern in the GaP layer lower than 5%, avoiding the complex process of transferring and bonding a GaP wafer to a silicon-on-insulator wafer. To demonstrate the quality and feasibility of the proposed fabrication route, suspended OM cavities are fabricated and experimentally characterized. The cavities exhibit optical quality factors between 103 and 104 at telecom wavelengths, and localized mechanical resonances approximate to 3.1 GHz with quality factors approximate to 63 when measured at room temperature. These results suggest a simple and low-cost way to build GaP-based photonic devices directly integrated on industry-standard Si(001) photonic wafers.; Here, optomechanical (OM) cavities on Gallium Phosphide (GaP) epitaxially grown on exact (001)-Si are fabricated following a novel two-step dry-etching process. The suspended OM cavities showed optical Q-factors up to 104 at telecom wavelengths, and mechanical resonances at approximate to 3.1 GHz at room temperature, suggesting a simple and low-cost way to build GaP-based photonic devices directly integrated on Si(001) photonic wafers. image, P.M. and L.M. contributed equally to this work. V.J.G., P.M, and R.R acknowledge financial support from the Generalitat Valenciana (Project: INVEST/2022/170). M.S.L. acknowledges financial support from the Generalitat Valenciana (Project: CIAPOS/2021/293). V.J.G. acknowledges financial support from the Generalitat Valenciana (CDEIGENT/2020/009), partial funding from the Conselleria de Educacion, Universidades y Empleo under the NIRVANA Grant (PROMETEO Program, CIPROM/2022/14), and to the AGENCIA ESTATAL DE INVESTIGACION of Ministerio de Ciencia, Innovacion y Universidades Grant CNS2023-145093 funded by MICIU/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR". S.F.G. acknowledges the financial support received through the program Ramon y Cajal (co-financed by the European Social Fund) under Grant No. RYC-2016-19509. All authors acknowledge financial support from The AGENCIA ESTATAL DE INVESTIGACION of Ministerio de Ciencia e Innovacion (PID2020-118855RB-I00, PID2020-114280RB-I00, and PID2021-124618NB-C21) and to the European Regional Development Fund (ERDF) (IDIFEDER/2020/041, IDIFEDER/2021/061). This study formed part of the Quantum Communications program and was supported by Ministerio de Ciencia e Innovacion (MCIN) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (COMCUANTICA/003 and COMCUANTICA/004).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

A performance comparison of CUDA remote GPU virtualization frameworks

  • Reaño González, Carlos
  • Silla, Federico|||0000-0002-6435-1200
Using GPUs reduces execution time of many applications but increases acquisition cost and power consumption. Furthermore, GPUs usually attain a relatively low utilization. In this context, remote GPU virtualization solutions were recently created to overcome the drawbacks of using GPUs. Currently, many different remote GPU virtualization frameworks exist, all of them presenting very different characteristics. These differences among them may lead to differences in performance. In this work we present a performance comparison among the only three CUDA remote GPU virtualization frameworks publicly available at no cost. Results show that performance greatly depends on the exact framework used, being the rCUDA virtualization solution the one that stands out among them. Furthermore, rCUDA doubles performance over CUDA for pageable memory copies., This work was funded by the Generalitat Valenciana under Grant PROMETEOII/2013/009 of the PROMETEO program phase II. Authors are also grateful for the generous support provided by Mellanox Technologies
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Elastic and cost-effective data carrier architecture for smart contract in blockchain

  • Liu, Xiaolong
  • Muhammad, Khan
  • Chen, Yu-Wen
  • Yuan, Shyan-Ming
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Smart contract, which could help developer deploy decentralized and secure blockchain application, is one of the most promising technologies for modern Internet of things (IoT) ecosystem today. However, Ethereum smart contract lacks of ability to communicate with outside IoT environment. To enable smart contracts to fetch off-chain data, this paper proposes a data carrier architecture that is cost-effective and elastic for blockchain-enabled IoT environment. Three components, namely Mission Manager, Task Publisher and Worker, are presented in the data carrier architecture to interact with contract developer, smart contract, Ethereum node and off-chain data sources. Selective solutions are also proposed for filtering smart contract event and decoding event log to fit different requirements. The evaluation results and discussions show the proposed system will decrease about 20USD deployment cost in average for every smart contract, and it is more efficient and elastic compared with Oraclize Oracle data carrier service., This work was supported by the fund of National Natural Science Foundation of China (Grants No. 61702102), Natural Science Foundation of Fujian Province, China (Grant No. 2018J05100), Foundation for Distinguished Young Scholars of Fujian Agriculture and Forestry University (Grant No. xjq201809), and in part by the MOST of Taiwan (Grant No. 107-2623-E-009-006-D).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tailoring structural, rheological and gelling properties of watermelon rind pectin by enzymatic treatments

  • Méndez-Reyes, Daniel Alexander|||0000-0001-6414-305X
  • Martínez-Abad, Antonio
  • Martínez-Sanz, Marta
  • López-Rubio, A.
  • Fabra Rovira, Maria José
[EN] In this work, pectin extracts from watermelon rind (WRP) were enzymatically treated to evaluate their potential for preparing hydrogels with the addition of CaCl2. Based on a previous work, two different conditions were selected to obtain WRP extracts according to the 1) highest yield (OP) or 2) highest yield without negatively affecting the branching and native structure of pectin (OPA). Firstly, both WRP extracts were enzymatically modified using different treatments (de-esterification and/or de-branching of galacturonic and arabinose side chains, and deproteinization), and their impact on the esterification degree, monosaccharide composition and changes on their structural properties (linearity and branching degree) were analysed. Then, the effect of the structural properties of the resulting pectin on the rheological behaviour and nanostructure of the hydrogels was investigated. The presence of long branched side chains and high methyl-esterified galacturonic acid chains promoted the formation of weaker hydrogels whereas de-esterification of the original pectin enabled intermolecular association giving rise to stronger hydrogels with the formation of ordered and densely packed structures (as deduced from SAXS results). However, the presence of small arabinogalactans side chains in the de-branched and de-esterified pectin extracts acted as reinforcement agents, inducing the formation of more densely packed networks and stronger hydrogels than their less-branched counterpart. These results demonstrated the impact of the pectin structure on the hydrogel-forming capacity., Grant RTI-2018-094268-B-C22 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". This work was also funded by the grant INNVAL10-19-009 -CA8250 from Agencia Valenciana d'Innovacio (AVI). D.A. M ' endez. is supported by the Administrative Department of Science, Technology and Innovation (Colciencias) of the Colombian Government (783-2017). This research is part of the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094. Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy+. (PTI-SusPlast+) is also acknowledged for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Crop Monitoring Strategy Based on Remote Sensing Data (Sentinel-2 and Planet), Study Case in a Rice Field after Applying Glycinebetaine

  • San Bautista Primo, Alberto|||0000-0003-4846-6611
  • Castiñeira-Ibáñez, Sergio|||0000-0001-6414-3906
  • Arizo-García, Patricia|||0000-0002-6725-9098
  • Uris Martínez, Antonio|||0000-0002-2005-2305
  • Rubio Michavila, Constanza|||0000-0002-4395-7473
  • Fita-Silvestre, David
  • Franch, Belen
  • Sánchez-Torres, María José
  • Becker-Reshef, Inbal
[EN] World agriculture is facing a great challenge since it is necessary to find a sustainable way to increase food production. Current trends in advancing the agriculture sector are based on leveraging remote sensing technology and the use of biostimulants. However, the fficient implementation of both of these on a commercial scale for the purposes of productivity improvement remains a challenge. Thus, by proposing a crop monitoring strategy based on remote sensing data, this paper aims to verify and anticipate the impact of applying a Glycinebetaine biostimulant (GB) on the final yield. The study was carried out in a rice-producing area in Eastern Spain (Valencia) in 2021. GB was applied by drone 33 days after sowing (tillering phase). Phenology was monitored and crop production parameters were determined. Regarding satellite data, Sentinel-2 cloud-free images were obtained from sowing to harvest, using the bands at 10 m. Planet data were used to evaluate the results from Sentinel-2. The results show that GB applied 33 days after sowing improves both crop productive parameters and commercial yield (13.06% increase). The design of the proposed monitoring strategy was based on the dynamics and correlations between the visible (green and red) and NIR bands. The analysis showed differences when comparing the GB and control areas, and permitted the determination of the moment in which the effect of GB on yield (tillering and maturity) may be greater. In addition, an index was constructed to verify the crop monitoring strategy, its mathematical expression being: NCMI = (NIR ¿ (red + green))/(NIR + red + green). Compared with the other VIs (NDVI, GNDVI and EVI2), the NCMI presents a greater sensitivity to changes in the green, red and NIR bands, a lower saturation phenomenon than NDVI and a better monitoring of rice phenology and management than GNDVI and EVI2. These results were evaluated with Planet images, obtaining similar results. In conclusion, in this study, we confirm the improvement in rice crop productivity by improving sustainable plant nutrition with the use of biostimulants and by increasing the components that define crop yield (productive tillers, spikelets and grains). Additionally, crop monitoring using remote sensing technology permits the anticipation and understanding of the productive behavior., This research was funded by the program Generacio Talent of the Generalitat Valenciana (CIDEGENT/2018/009) and the Cooperative Agreement NASA Harvest, grant number 80NSSC18M0039.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Manufacture of High-Efficiency and Stable Lead-Free Solar Cells through Antisolvent Quenching Engineering

  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
  • Marí-Guaita, Julia
  • Palacios, Pablo
[EN] Antisolvent quenching has shown to significantly enhance several perovskite films used in solar cells; however, no studies have been conducted on its impact on MASnI(3). Here, we investigated the role that different antisolvents, i.e., diethyl ether, toluene, and chlorobenzene, have on the growth of MASnI(3) films. The crystallinity, morphology, topography, and optical properties of the obtained thin films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence (PL) measurements, and UV-visible spectroscopy. The impact of the different antisolvent treatments was evaluated based on the surface homogeneity as well as the structure of the MASnI(3) thin films. In addition, thermal annealing was optimized to control the crystallization process. The applied antisolvent was modified to better manage the supersaturation process. The obtained results support the use of chlorobenzene and toluene to reduce pinholes and increase the grain size. Toluene was found to further improve the morphology and stability of thin films, as it showed less degradation after four weeks under dark with 60% humidity. Furthermore, we performed a simulation using SCAPS-1D software to observe the effect of these antisolvents on the performance of MASnI(3)-based solar cells. We also produced the device FTO/TiO2/MASnI(3)/Spiro-OMeTAD/Au, obtaining a remarkable photoconversion efficiency (PCE) improvement of 5.11% when using the MASnI(3) device treated with chlorobenzene. A PCE improvement of 9.44% was obtained for the MASnI(3) device treated with toluene, which also showed better stability. Our results support antisolvent quenching as a reproducible method to improve perovskite devices under ambient conditions., The author Amal Bouich postdoctoral researcher acknowledges Margarita Salas Fellowship (MCIN/AEI/10.13039/501100011033) for funding support. This work was supported by EU under Project PID2019-107137RB-C21 and by ERDF under the funding "A way of making Europe". This work was supported by the Ministerio de Ciencia e Innvacion through the project BESTMAT (PID2019107137RB-C21) and (PID2019-107137RB-C22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Steel Concrete Composite Systems for Modular Construction of High-rise Buildings

  • Liew, Richard
  • Dai, Z.
  • Chau, Yie Sue
[EN] Modular construction has gained popularity and attention particularly in low-rise building lately due to its numerous advantages: faster construction speed, better quality control, reduction in work force and construction waste, etc. This innovative technology promotes off-site manufacturing of modular units and on-site assembly, improving the construction efficiency and productivity. However, modular construction is not commonly used in high-rise buildings because of the joints’ flexibility as well as manufacturing and construction tolerance, which have significant impact on the overall stability of the building. This paper highlights the existing challenges of modular construction of high-rise buildings and provide several options to address these challenges. Firstly, the weight of a module is constrained by the transportation and lifting crane capacities. For this reason, lightweight concrete is introduced together with structural steel section to form lightweight steel-concrete composite system to reduce the weight of the module without compromising the strength and stiffness. Secondly, to speed up the site assembly of modular units, special joints are developed to resist the forces due to gravity and horizontal loads. Fast and easy joining techniques with acceptable tolerance control are essential to ensure the structural integrity and stability of the building. Finally, the innovation for productivity can be maximized by implementing automation technologies in the manufacturing and construction of the modular units., The authors would like to acknowledge the financial support by the National Research Foundation (NRF) and SembCorp-NUS Corp Lab under project grant R-261-513-009-281.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Microwave-assisted preparation of 1D NCs for photodegradation process of organic dyes

  • Zaba, A.
  • Matras-Postolek, Katarzyna
  • Sovinska, S.
  • Bogdal, D.
[EN] Zinc sulphide (ZnS) and zinc selenide (ZnSe) and manganese-doped and un-doped with different morphologies from 1D do 3D microflowers were successfully fabricated in only a few minutes by solvothermal reactions under microwave irradiation. In order to compare the effect of microwave heating on the properties of obtained nanocrystals, additionally the synthesis under conventional heating was conducted additionally in similar conditions. The obtained nanocrystals were systematically characterized in terms of structural and optical properties using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), diffuse reflectance UV-Vis spectroscopy (DR UV-Vis), Fourier-transform infrared spectroscopy (FT-IR), photoluminescence spectroscopy (PL), X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET) surface area analysis. The photocatalytic activity of ZnSe, ZnS, ZnS:Mn and ZnSe:Mn nanocrystals with different morphologies was evaluated by the degradation of methyl orange (MO) and Rhodamine 6G (R6G), respectively. The results show that Mn doped NCs samples had higher coefficient of degradation of organic dyes under ultraviolet irradiation (UV)., This work was financially supported by the National Centre for Research and Development within the V edition of the LIDER program (project number LIDER/009/185/L5/13/NCBR/2014).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Real-time functionalization and biosensing in subwavelength grating bimodal waveguides

  • Torrijos-Morán, Luis
  • Martinez-Perez, Paula
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] In this paper, we present for the first time experimental results of biosensing processes by using subwavelength grating bimodal waveguides as a refractive index sensors. We demonstrate the detection of 10ppm concentration of Bovine Serum Albumin (BSA) with a 190pm wavelength shift after a functionalization of the sensor surface with a layer of protein A/G in a continuous flowing system. Real-time data of each step is obtained, validating these kind of novel and highly sensitive SWG sensors for biosensing purposes., The authors acknowledge the funding from the Generalitat Valencia through project AVANTI/2019/123 and grant ACIF/2019/009.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Diagnóstico médico por robots y responsabilidad civil

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[ES] ¿Puede diagnosticarme un robot? A esta pregunta tan futurista la respuesta es que sí. De hecho, el diagnóstico médico con asistencia de la robótica no es una novedad en el ámbito médico. Sin embargo, somos todavía reticentes a que no sea una persona quien nos diagnostique y nos da más confianza el ser humano que la máquina. Sobre esta cuestión vamos a reflexionar en el presente trabajo a la vista de la legislación aplicable., [EN] Can a robot diagnose me? The answer to this futuristic question is yes. In fact, medical diagnosis with the assistance of robotics is not a novelty in the medical field. However, we are still reluctant to have a diagnosis made by anyone other than a person and we trust humans more than machines. We will reflect on this question in this paper in light of the applicable legislation., Trabajo realizado en el marco del Grupo de Investigación de Excelencia Generalitat Valenciana Algorithmical Law (Proyecto Prometeu 2021/009, 2021-2024), y Proyecto Derechos y garantías públicas frente a las decisiones automatizadas y el sesgo y discriminación algorítmicas 2023-2025 (PID2022-136439OB-I00) financiado por MCIN/AEI/10.13039/501100011033/ FEDER, UE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Libro o Monografía (Book)

La vivienda colaborativa o cohousing: su oportunidad como nueva forma de habitar

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[ES] Cada vez son más las personas que al llegar a una cierta edad piensan que una solución para su calidad de vida es compartir un espacio. La vivienda tradicional no siempre es una buena opción para combatir la soledad, disponer de servicios y compartir aficiones y espacios comunes. Es por ello que la vivienda colaborativa es una opción cada vez más elegida por las personas de edad avanzada para vivir con una mayor calidad de vida, no sentirse solas, y constituir una alternativa a las residencias de la tercera edad, más impersonales y además con el halo de aislamiento y de retiro no deseado.Se trata, por tanto, de una decisión personal, un derecho a la autogestión de la vejez, para decidir dónde, cómo y por quién cuidar y ser cuidado, Trabajo realizado en el marco del Grupo de Investigación de Excelencia Generalitat Valenciana “Algorithmical Law” (Proyecto Prometeu 2021/009, 2021-2024), Proyecto "Promoting capacity building and knowledge for the extension of urban gardens in European cities" (PCI2022-132963) (02/06/22 - 01/06/25). Investigación competitiva proyectos. Ministerio de Ciencia e Innovación, Proyecto Mujeres, cooperativismo y economía social y solidaria. Contribución a una participación igualitaria en la economía y la sociedad, Ministerio de Igualdad (46-12-ID22), y Proyecto de I+D+i “Derechos y garantías públicas frente a las decisiones automatizadas y el sesgo y discriminación algorítmicas” 2023-2025 (PID2022-136439OB-I00) financiado por MCIN/AEI/10.13039/501100011033/ FEDER, UE. Para la publicación del mismo se ha contado con una Ayuda PAIV (Propuestas de Actividades de Innovación en Vivienda), convocatoria 2023 de la Càtedra Innovació en Habitatge de la UPV, marco de colaboración entre la Generalitat Valenciana, a través de la Vicepresidencia Segona i Conselleria d’Habitatge i Arquitectura Bioclimàtica y la Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Red social de transferencia de conocimiento en la transformación digital del sector olivarero de Andalucía: perspectiva de los agentes de generación de conocimiento, Social network of knowledge transfer in the digital transformation of the olive sector in Andalusia: Perspective of knowledge generation agents

  • Reina-Usuga, Liliana
  • Parra-López, Carlos
  • Carmona-Torres, Carmen
  • Sayadi, Samir
[EN] The configuration of the social network of knowledge transfer in digital transformation (DT) in the Andalusian olive sector is analysed using Social Network Analysis techniques. The results indicate that universities and technology companies are the main knowledge emitting agents, while olive growers and cooperatives are the main receiving agents. The social network of DT has a high potential for the creation of social capital, however, most of the interactions established between actors are of very low intensity, which could lead to some actors being isolated from knowledge in DT., [ES] La configuración de la red social de transferencia de conocimiento en transformación digital (TD) del sector olivarero de Andalucía es analizada mediante el uso de técnicas de Análisis de Redes Sociales. Los resultados indican que las universidades y las empresas tecnológicas son los principales agentes emisores de conocimiento, mientras los olivareros y las cooperativas son los principales agentes receptores. La red tiene un alto potencial para la creación de capital social, aunque la mayoría de las interacciones son de intensidad muy débil, lo que podría conllevar a que algunos actores queden aislados del conocimiento en TD., Los autores agradecen el apoyo económico recibido del Instituto de Investigación y Formación Agraria y Pesquera (IFAPA) a través del proyecto de investigación “Transformación digital del sector oleícola en Andalucía: Análisis sistémico, estructural y funcional para impulsar su desarrollo (digitalOli)” (PR.AVA.AVA2019.009), cofinanciado al 80 % por el Fondo Europeo de Desarrollo Regional, dentro del Programa Operativo FEDER 2014-2020.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Delafossite as hole transport layer a new pathway for efficient perovskite-based solar sells: Insight from experimental, DFT and numerical analysis

  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
  • Cerutti Torres, Joeluis
  • Chfii, Hasnae
  • Marí-Guaita, Julia
  • Khattak, Yousaf Hameed
  • Baig, Faisal
  • Palacios, Pablo
[EN] Herein, we propose a successful technique to produce delafossite materials that can be applied as Hole Transport Layer (HTL) in inorganic lead halide Perovskite solar cells (PSCs). The delafossite CuMO2, where M = Al, Ga, Fe, Cr, Ni, Co, Cr types were investigated the M cation effect on the crystal structure, morphology, and optical properties. These properties were investigated using X-ray, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and UV visible spectroscopy. The XRD results confirmed their hexagonal and rhombohedral-like structure, where the SEM image of CuMO2 shows the good formation of delafossite layers. The optical band gap of CuMO2 varies from 2.2 eV to 2.99 eV, which is well in line with the literature. Similarly, we also perform the density functional theory (DFT) calculations for delafossite layers to find their electronic properties of them. Based on experimental and DFT calculations, we performed the numerical analysis in SCAPS-1D software on standard solar cell structure (Spiro -OMeTAD/MAPbI3/TiO2) and replaced Spiro -OMeTAD with all the deposited delafossite layers. Our numerical analysis found that HTL shows the highest power conversion efficiency (PCE%) of 22.90. The proposed work can give a good direction for manufacturing to improve the performance of Perovskite-based solar cells (PSCs)., This work has been funded by the Ministerio de Ciencia e Innovacion (Spain) and by the Spanish Agencia Estatal de Investigacion through projects BESTMAT PID2019-107137RB-C21/AEI/10.13039/5011000 11033 and PID2019-107137RB-C22/AEI/10.13039/501100011033 and by ERDF under the funding "A way of making Europe". The author Amal Bouich acknowledges MCIN for funding support through Marga-rita Salas Fellowship (MCIN/AEI/10.13039/501100011033).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Epitaxial growth of crystal phase quantum dots in III-V semiconductor nanowires

  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
[EN] Crystal phase quantum dots (QDs) are formed during the axial growth of III-V semiconductor nanowires (NWs) by stacking different crystal phases of the same material. In III¿V semiconductor NWs, both zinc blende (ZB) and wurtzite (WZ) crystal phases can coexist. The band structure difference between both crystal phases can lead to quantum confinement. Thanks to the precise control in III¿V semiconductor NW growth conditions and the deep knowledge on the epitaxial growth mechanisms, it is nowadays possible to control, down to the atomic level, the switching between crystal phases in NWs forming the so-called crystal phase NW-based QDs (NWQDs). The shape and size of the NW bridge the gap between QDs and the macroscopic world. This review is focused on crystal phase NWQDs based on III¿V NWs obtained by the bottom-up vapor¿liquid¿solid (VLS) method and their optical and electronic properties. Crystal phase switching can be achieved in the axial direction. In contrast, in the core/shell growth, the difference in surface energies between different polytypes can enable selective shell growth. One reason for the very intense research in this field is motivated by their excellent optical and electronic properties both appealing for applications in nanophotonics and quantum technologies., The authors acknowledge financial support from the Generalitat Valenciana (Projects: COMCUANTICA/003, CIAPOS/2021/293, and CDEIGENT/2020/009).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Maternidad subrogada, inteligencia artificial, algoritmos y selección de embriones

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[EN] This study analyzes the application of artificial intelligence in relation to assisted reproduction. On the one hand, the implication in the case of surrogate motherhood is analyzed; and on the other hand, in the case of embryo selection. The lack of a specific regulation of artificial intelligence, the application of ¿electronic traceability¿ systems, as well as the detection of diseases and alterations through algorithms pose a challenge for the Law that has to answer all these questions., [ES] En este estudio se analiza la aplicación de la inteligencia artificial en relación con la reproducción asistida. Por un lado, se analiza la implicación en el caso de la maternidad subrogada; y, por otro lado, en el supuesto de la selección de embriones. La falta de una regulación específica de la inteligencia artificial, la aplicación de sistemas de ¿trazabilidad electrónica¿, así como la detección de enfermedades y alteraciones mediante los algoritmos suponen un reto para el Derecho que tiene que dar respuesta a todas estas cuestiones., Trabajo realizado en el marco del Proyecto I+D+i «Retos investigación» del Programa estatal de I+D+i orientado a los Retos de la Sociedad del Ministerio de Ciencia, Innovación y Universidades RTI2018-097354-B-100 (2019- 2022) y Proyecto de I+D+i Retos MICINN (PID2019-108710RB-I00, 2020-2022), y Grupo de Investigación de Excelencia Generalitat Valenciana Algorithmical Law (Proyecto Prometeu 2021/009, 2021-2024).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fretting fatigue wear behavior of Y-TZP dental ceramics processed by non-conventional microwave sintering

  • PRESENDA-BARRERA, ALVARO
  • Vleugels, Jozef
  • Moreno, Rodrigo
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] The fretting wear behavior of self-mated Y-TZP dental materials obtained by non-conventional microwave and conventional sintering has been investigated. Two 3Y-TZP materials, a widely utilized commercial dental ceramic (LAVA) and a lab-prepared 3Y-TZP powder based equivalent have been assessed. Relative density and mechanical properties as well as the grain size variations upon sintering have been evaluated. After exposure to selected gross slip regime fretting wear conditions, the wear tracks have been characterized allowing the measurement of the coefficient of friction, track profiles, and pit features. The results indicate thaT microwave sintering results in a similar fretting wear behavior as observed for conventional sintered 3YTZP, since the measured volumetric wear loss is of a comparable order of magnitude. Regarding the influence of the grain size, the analysis revealed that a large grain size (>300 nm) results in an increased wear volume and that a higher resistance to fretting wear is constrained to a midrange particle size. Since the fracture toughness of all investigated ceramic grades was comparable, the influence of the fracture toughness could not be assessed. Abrasive grooving, delamination and microcracking have been identified as major wear mechanisms inside the wear tracks for both conventional and microwave sintered 3Y-TZP. In general, microwave sintering can provide 3Y-TZP dental materials with a comparable fretting wear resistance as that observed for conventional sintering using lower dwell sintering temperatures and a shorter processing time., Spanish Ministry of Economy and Competitiveness MINECO, Grant/Award Number: MAT2015-67586-C3-R; Generalitat Valenciana, Grant/Award Number: GRI-SOLIA/2013/035, GV/2014/009; MINECO, Grant/Award Number: IJCI-2014-19839.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Vértigo (1958) de Hitchcock: la utilización del cromatismo en la descripción de patologías médicas de los personajes, Hitchcock&apos, s Vertigo (1958): the use of chromatism in the description of medical pathologies of characters

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[ES] Una de las películas más emblemáticas de la filmografía de Alfred Hitchcock es Vértigo (1958), y que junto con Psicosis (1960) su título se corresponde con una enfermedad, en concreto del sistema vestibular. Se trata de una adaptación cinematográfica de la novela de Sueurs froides: d ¿entre les morts, de Pierre Boileau y Thomas Narcejac. En esta película se utiliza el color como recurso cinematográfico para identificar a los personajes y también sus enfermedades. Colores primarios como el rojo, azul y amarillo se corresponden con el vértigo, el mareo la acrofobia, y la limerencia, así como trastornos del sueño; y los secundarios como el verde y el gris con los trastornos de la personalidad y conductas autodestructoras directas o conscientes. Nos proponemos, desde el punto de vista personal, analizar la asociación de colores, su fusión y combinación en las enfermedades que sufren los personajes y que se identifican por la percepción cromática que domina todo el filme., [EN] One of the most emblematic films of Alfred Hitchcock¿s filmography is Vertigo (1958), and that together with Psychosis (1960) its title corresponds to a disease, specifically of the vestibular system. It is a film adaptation of the novel by Sueurs froides: d entre les morts by Pierre Boileau and Thomas Narcejac. In this film color is used as a cinematographic resource to identify the characters and also their diseases. Primary colors such as red, blue and yellow correspond to vertigo, dizziness, acrophobia, and limerence, as well as sleep disorders; and secondary ones such as green and gray with personality disorders and direct or conscious self-destructive behaviors. We propose, from a personal point of view, to analyze the association of colors, their fusion and combination in the diseases suffered by the characters and that are identified by the chromatic perception that dominates the whole film., Trabajo realizado en el marco del Proyecto I+D+i RTI2018-097354-B-100 (2019-2022), del Proyecto (PID2019-108710RB-I00, 2020-2022), y Grupo de Investigación de Excelencia Generalitat Valenciana «Algorithmical Law» (Proyecto Prometeu 2021/009, 2021-2024).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

1D Periodic Corrugated Waveguides for Real-Time Detection of Increasing Concentrations of Thrombin

  • Martinez-Perez, Paula
  • Torrijos-Morán, Luis
  • Gómez-Gómez, María Isabel|||0000-0001-7548-209X
  • Ivanova-Angelova, Todora|||0000-0002-8150-4133
  • Griol Barres, Amadeu
  • Hurtado Montañés, Juan|||0000-0002-4870-7641
  • Bellieres, Laurent Christophe
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] An aptasensor based on periodic 1D corrugated waveguides is demonstrated to be suitable for the specific and continuous detection of thrombin at nM concentrations in real time with an estimated detection limit of 33.5 pM., This research was supported by a co-financed action by the European Union through the operational program of the European Regional Development Fund (FEDER) of the Valencian Community 2014-2020, the Generalitat Valenciana through the PROMETEO project AVANTI/2019/123 and the grant ACIF/2019/009, and by Universitat Politècnica de València through grants PAID-01-17 and the project OCUSENSOR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modelo matemático optimizado para la predicción y planificación de la asistencia sanitaria por la COVID-19, Mathematical model optimized for prediction and health care planning for COVID-19

  • Garrido, J.M.
  • Rodríguez-Serrano, F.
  • Pérez-Villares, J.M.
  • Ferreiro-Marzal, A.
  • Jiménez-Quintana, M.M.
  • Grupo de Estudio COVID 19 Granada
  • Martínez-Rodríguez, David|||0000-0002-2093-7840
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
[EN] Objective The COVID-19 pandemic has threatened to collapse hospital and ICU services, and it has affected the care programs for non-COVID patients. The objective was to develop a mathematical model designed to optimize predictions related to the need for hospitalization and ICU admission by COVID-19 patients. Design Prospective study. Setting Province of Granada (Spain). Population COVID-19 patients hospitalized, admitted to ICU, recovered and died from March 15 to September 22, 2020. Study variables The number of patients infected with SARS-CoV-2 and hospitalized or admitted to ICU for COVID-19. Results The data reported by hospitals was used to develop a mathematical model that reflects the flow of the population among the different interest groups in relation to COVID-19. This tool allows to analyse different scenarios based on socio-health restriction measures, and to forecast the number of people infected, hospitalized and admitted to the ICU. Conclusions The mathematical model is capable of providing predictions on the evolution of the COVID-19 sufficiently in advance as to anticipate the peaks of prevalence and hospital and ICU care demands, and also the appearance of periods in which the care for non-COVID patients could be intensified., [ES] Objetivo La pandemia de la COVID-19 ha supuesto una amenaza de colapso de los servicios hospitalarios y de unidades de cuidado intensivo (UCI), así como una reducción de la dinámica asistencial de pacientes afectados por otras patologías. El objetivo fue desarrollar un modelo matemático diseñado para optimizar las predicciones relacionadas con las necesidades de hospitalización e ingresos en UCI por la COVID-19. Diseño Estudio prospectivo. Ámbito Provincia de Granada (España). Pacientes Pacientes de COVID-19 hospitalizados, ingresados en UCI, recuperados y fallecidos desde el 15 de marzo hasta el 22 de septiembre del 2020. Intervenciones Desarrollo de un modelo matemático tipo susceptible, expuesto, infectado y recuperado (SEIR) capaz de predecir la evolución de la pandemia, considerando las medidas de salud pública establecidas. Variables de interés Número de pacientes infectados por SARS-CoV-2, hospitalizados e ingresados en UCI por la COVID-19. Resultados A partir de los datos registrados, hemos podido desarrollar un modelo matemático que refleja el flujo de la población entre los diferentes grupos de interés en relación con la COVID-19. Esta herramienta permite analizar diferentes escenarios basados en medidas de restricción socio-sanitarias y pronosticar el número de infectados, hospitalizados e ingresados en UCI. Conclusiones El modelo matemático es capaz de proporcionar predicciones sobre la evolución de la COVID-19 con suficiente antelación como para poder conjugar los picos de prevalencia y de necesidades de asistencia hospitalaria y de UCI, con la aparición de ventanas temporales que posibiliten la atención de enfermos no-COVID., Este estudio ha sido financiado por el Ministerio de Economía, Industria y Competitividad de España, ¿ la Agencia Estatal de Investigación y el Fondo Europeo de Desarrollo Regional (MTM2017-89664-P); la Unión Europea a través del Programa de Fondos de Desarrollo Regional/Fondo Social Europeo y la Comunidad Valenciana (GJIDI/2018/A/010 y GJIDI/2018/A/009); y la Fundación Ramón Areces, Madrid, Spain (CIVP18A3920)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

La empresa familiar agraria en el derecho civil valenciano: la sucesión en los arrendamientos rústicos históricos, The agricultural family company in valencian civil law: succession in historical rustic leases

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[EN] In the present study, the family business is analyzed within the Valencian Civil Law, exposing its main characteristics and distinctive signs. The work will focus on succession in the case of historical rustic leases, distinguishing both inter vivos transmission and mortis causa, with an approximation of cases resolved by the most recent jurisprudence in order to obtain conclusions of interest to the scientific community., [ES] En el presente estudio se analiza la empresa familiar en el seno del Derecho civil valenciano exponiendo sus principales características y signos distintivos. Se centrará el trabajo en la sucesión en el caso de los arrendamientos rústicos históricos distinguiendo tanto la transmisión inter vivos como mortis causa, con una aproximación de casos resueltos por la jurisprudencia más reciente con la finalidad de obtener unas conclusiones de interés para la comunidad científica., Trabajo realizado en el marco del Proyecto I+D+i «Retos investigación» del Programa estatal de I+D+i orientado a los Retos de la Sociedad del Ministerio de Ciencia, Innovación y Universidades: RTI2018-097354-B-100 (2019-2022), Proyecto I+D+i Retos de Investigación del Programa Estatal de I+D+i orientada a los retos de la sociedad MICINN (PID2019-108710RB-I00, 2020-2022), y Grupo de Investigación de Excelencia Generalitat Valenciana Algorithmical Law (Proyecto Prometeu 2021/009, 2021-2024), y Proyecto Promoting capacity building and knowledge for the extension of urban gardens in European cities (PCI2022-132963). (02/06/22 - 01/06/25). Ministerio de Ciencia e Innovación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

A Heuristic optimization approach to solve berth allocation problem

  • Burgos-Simon, Clara|||0000-0001-6385-4263
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Martínez-Rodríguez, David|||0000-0002-2093-7840
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
This work has been partially supported by the Ministerio de Economía y Competitividad grant MTM2017-89664-P and by the Ministerio de Ciencia, Innovacion y Universidades (Retos Colaboracion 2017) grant RTC-2017-6566-4, VALKNUT.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

El efecto del empleo de anclas verbales o numéricas en una rúbrica para evaluar presentaciones orales, sobre la consistencia de las puntuaciones de los alumnos universitarios

  • Marin-Garcia, Juan A.|||0000-0001-5416-3938
  • Santandreu Mascarell, Cristina|||0000-0002-9574-9852
  • Maheut, Julien|||0000-0002-5796-9053
  • Rius-Sorolla, Gregorio|||0000-0003-3734-9620
[EN] In this paper we compare the use of two versions of a rubric for evaluation by university students, of oral presentations of their peers. We have analyzed two sets of data from Industrial Engineering students: 29 presentations (449 independent evaluations) in 2004 and 36 presentations (468 independent evaluations) in 2013. Contrary to expectations the consistency of assessments using improved rubric (second version) are worse than the first. But this may be due to differences in how to perform the evaluation activity with students, [ES] En este trabajo comparamos el uso de dos versiones de una rúbrica para la evaluación, por parte de alumnos universitarios, de las presentaciones orales de sus compañeros. Hemos analizado dos conjuntos de datos provenientes de estudiantes de Ingeniería de Organización Industrial: 29 presentaciones (449 evaluaciones independientes) en el año 2004 y 36 presentaciones (468 evaluaciones independientes) en el año 2013. Contrariamente a lo esperado la consistencia de las evaluaciones de la rúbrica mejorada (segunda versión) son peores que la primera. Pero esto puede ser debido a las diferencias en el modo de realizar la actividad de evaluación con los alumnos., Este trabajo ha sido realizado con la financiación de Universitat Politécnica de Valencia PIME/2015/A/009/A “Evaluación de los indicadores del comportamiento innovador en el alumno universitario”. Los autores agradecen los comentarios y sugerencias recibidas por los integrantes del grupo EICE-IEMA de la Universitat Politècnica de València
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the use of adaptive media playout for inter-destination synchronization

  • Montagud, Mario
  • Boronat, Fernando|||0000-0001-5525-3441
[EN] Inter-Destination Multimedia Synchronization (IDMS) is essential in most of the emerging social multimedia applications. In this paper we present a novel Adaptive Media Playout (AMP) scheme that aims to acquire an overall synchronization status between distributed receivers by means of smoothly adjusting their playout timing. Simulation results show that the proposed solution minimizes long-term playout discontinuities (skips and/or pauses) which are subjectively more annoying to users than small variations in the media playout rate., This work was supported by the Universitat Politecnica de Valencia (UPV), under its R&D Support Program in the PAID-01-10 Project, and by Generalitat Valenciana, under its R&D Support Program in the GV 2010/009 Project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modeling and &quot, smart&quot, prototyping human-in-the-loop interactions for AmI environments

  • Gil, Miriam
  • Albert Albiol, Manuela|||0000-0003-3747-400X
  • Fons Cors, Josep|||0000-0002-3718-3096
  • Pelechano Ferragud, Vicente|||0000-0003-1090-230X
[EN] Autonomous capabilities are required in AmI environments in order to adapt systems to new environmental conditions and situations. However, keeping the human in the loop and in control of such systems is still necessary because of the diversity of systems, domains, environments, context situations, and social and legal constraints, which makes full autonomy a utopia within the short or medium term. Human-system integration introduces an important number of challenges and problems that have to be solved. On the one hand, humans should interact with systems even in those situations where their attentional, cognitive, and physical resources are limited in order to perform the interaction. On the other hand, systems must avoid overwhelming the user with unnecessary actions. Therefore, appropriate user-centered methods for AmI development should be used to help designers analyze and design human-in-the-loop interactions in AmI environments. This paper presents a user-centered design method that defines a process with a set of tools and techniques that supports the process steps in order to systematically design, prototype, and validate human-in-the-loop (HiL) solutions. The process starts with the definition of the HiL design, which defines how the system cooperates with the human. This HiL design is built using a conceptual framework that focuses on achieving human-system interactions that get human attention and avoid obtrusiveness. Then, we provide a software infrastructure to generate a prototype based on the HiL design and validate it by having end-users use a web simulator. The feedback data generated during the prototype user validation is gathered and used by a machine learning tool that infers the user's needs and preferences. Finally, these inferences are used to automatically enhance the human-in-the-loop designs and prototypes. We have validated the proposed method through a twofold perspective: an experiment to analyze the perception of interaction designers regarding their acceptance of the design method and another experiment to evaluate the usefulness of the "smart" prototyping technique. The results obtained point out the acceptability of the proposed method by designers and the useful adaptations provided by the "smart" prototyping technique to achieve a HiL design that adapts well to users' preferences and needs., This work has been developed with the financial support of the Spanish State Research Agency and the Generalitat Valenciana under the projects TIN2017-84094-R and AICO/2019/009 and co-financed with ERDF.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

El Tribunal de las Aguas de la Vega de Valencia y la Huerta Valenciana: aspectos referentes a la solución de conflictos, The Water Court of the Vega de Valencia and the Huerta Valenciana: aspects related to conflict resolution

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[EN] the existence of the Tribunal de las Aguas de la Vega de Valencia is very closely linked to the Huerta Valenciana. The water that irrigates the irrigation ditches on the right and left banks of the Turia River is part of this ancient court that is responsible for settling conflicts around it. In this work, we propose to establish the connection of the court with a highly protected space such as the Orchard, and the characteristics that a customary court has to resolve conflicts that arise regarding irrigation in said space. The specific regulation of the Huerta as well as the territorial planning are of special interest for the survival of a unique court in the world that has been declared intangible heritage of humanity, [ES] la existencia del Tribunal de las Aguas de la Vega de Valencia se vincula de forma muy estrecha con la Huerta Valenciana. El agua que riega las acequias del margen derecho e izquierdo del río Turia forma parte de este tribunal milenario que se encarga de dirimir los conflictos en torno a ella. Nos proponemos en este trabajo establecer la conexió.n del Tribunal con un espacio altamente protegido como es la Huerta, y las características que tiene un tribunal consuetudinario para resolver los conflictos que se producen en materia de riego en dicho espacio. La regulación específica de la Huerta así como la ordenación territorial resultan de especial interés para la pervivencia de un tribunal único en el mundo y que ha sido declarado patrimonio inmaterial de la humanidad., Trabajo realizado en el marco del Grupo de Investigación de Excelencia Generalitat Valenciana (Proyecto Prometeu 2021/009, 2021-2024), y Proyecto de I+D+i Derechos y garantías públicas frente a las decisiones automatizadas y el sesgo y discriminación algorítmicas 2023-2025 (PID2022-136439OB-I00) financiado por Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación/10.13039/501100011033/ Fondo Europeo de Desarrollo Regional, Unión Europea y Proyecto Promoting capacity building and knowledge for the extension of urban gardens in European cities (PCI2022-132963) (02/06/22 - 01/06/25). Investigación competitiva proyectos. Ministerio de Ciencia e Innovación, España.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Introducing randomness in the analysis of chemical reactions: An analysis based on random differential equations and probability density function

  • Cortés, J.-C.|||0000-0002-6528-2155
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
  • Navarro-Quiles, Ana
[EN] In this work we consider a particular randomized kinetic model for reaction-deactivation of hydrogen peroxide decomposition. We apply the Random Variable Transformation technique to obtain the first probability density function of the solution stochastic process under general conditions. From the rst probability density function, we can obtain fundamental statistical information, such as the mean and the variance of the solution, at every instant time. The transformation considered in the application of the Random Variable Transformation technique is not unique. Then, the first probability density function can take different expressions, although essentially equivalent in terms of computing probabilistic information. To motivate this fact, we consider in our analysis two different mappings. Several numerical examples show the capability of our approach and of the obtained results as well. We show, through simulations, that the choice of the transformation, that permits computing the first probability density function, is a crucial issue regarding the computational time., This work has been supported by the Spanish Ministerio de Economía, Industria y Competitividad (MINECO), the Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER UE) grant MTM2017-89664-P. Computations have been carried thanks to the collaboration of Raúl San Julián Garcés and Elena López Navarro granted by European Union through the Operational Program of the European Regional Development Fund (ERDF)/European Social Fund (ESF) of the Valencian Community 2014-2020, grants GJIDI/2018/A/009 and GJIDI/2018/A/010, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

SLURM Support for Remote GPU Virtualization: Implementation and Performance Study

  • Iserte Agut, Sergio
  • Mayo Gual, Rafael
  • Duato Marín, José Francisco
  • Reaño González, Carlos
  • Castelló, Adrián|||0000-0002-8576-8451
  • Quintana-Ortí, Enrique S.|||0000-0002-5454-165X
  • Silla, Federico|||0000-0002-6435-1200
  • Prades, Javier|||0000-0003-3349-2200
SLURM is a resource manager that can be leveraged to share a collection of heterogeneous resources among the jobs in execution in a cluster. However, SLURM is not designed to handle resources such as graphics processing units (GPUs). Concretely, although SLURM can use a generic resource plugin (GRes) to manage GPUs, with this solution the hardware accelerators can only be accessed by the job that is in execution on the node to which the GPU is attached. This is a serious constraint for remote GPU virtualization technologies, which aim at providing a user-transparent access to all GPUs in cluster, independently of the specific location of the node where the application is running with respect to the GPU node. In this work we introduce a new type of device in SLURM, "rgpu", in order to gain access from any application node to any GPU node in the cluster using rCUDA as the remote GPU virtualization solution. With this new scheduling mechanism, a user can access any number of GPUs, as SLURM schedules the tasks taking into account all the graphics accelerators available in the complete cluster. We present experimental results that show the benefits of this new approach in terms of increased flexibility for the job scheduler., The researchers at UPV were supported by the the Generalitat Valenciana under Grant PROMETEOII/2013/009 of the PROMETEO program phase II. Researchers at UJI were supported by MINECO, by FEDER funds under Grant TIN2011-23283, and by the Fundacion Caixa-Castelló Bancaixa (Grant P11B2013-21).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Probabilistic analysis of linear-quadratic logistic-type models with hybrid uncertainties via probability density functions

  • Burgos-Simon, Clara|||0000-0001-6385-4263
  • Cortés, J.-C.|||0000-0002-6528-2155
  • López-Navarro, Elena|||0000-0003-0164-9007
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
[EN] We provide a full stochastic description, via the first probability density function, of the solution of linear-quadratic logistic-type differential equation whose parameters involve both continuous and discrete random variables with arbitrary distributions. For the sake of generality, the initial condition is assumed to be a random variable too. We use the Dirac delta function to unify the treatment of hybrid (discrete-continuous) uncertainty. Under general hypotheses, we also compute the density of time until a certain value (usually representing the population) of the linear-quadratic logistic model is reached. The theoretical results are illustrated by means of several examples, including an application to modelling the number of users of Spotify using real data. We apply the Principle Maximum Entropy to assign plausible distributions to model parameters, This work has been supported by the Spanish Ministerio de Economa, Industria y Competitividad (MINECO) , the Agencia Estatal de Investigaci on (AEI) and Fondo Europeo de Desarrollo Regional (FEDER UE) grant MTM201789664P. Computations have been carried thanks to the collaboration of Raul San Julian Garces and Elena Lopez Navarro granted by European Union through the Operational Program of the European Regional Development Fund (ERDF) /European Social Fund (ESF) of the Valencian Community 2014-2020, grants GJIDI/2018/A/009 and GJIDI/2018/A/010, respectively
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Plasma-Induced Surface Modification of Sapphire and Its Influence on Graphene Grown by Plasma-Enhanced Chemical Vapour Deposition

  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Ivanova-Angelova, Todora|||0000-0002-8150-4133
  • Díaz-Fernández, Francisco J.|||0000-0002-4247-2589
  • Kovylina-Zabyako, Miroslavna
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
  • Bernat-Montoya, Ignacio
  • Boscá Mojena, Alberto
[EN] In this work, we study the influence of the different surface terminations of c-plane sapphire substrates on the synthesis of graphene via plasma-enhanced chemical vapor deposition. The different terminations of the sapphire surface are controlled by a plasma process. A design of experiments procedure was carried out to evaluate the major effects governing the plasma process of four different parameters: i.e., discharge power, time, pressure and gas employed. In the characterization of the substrate, two sapphire surface terminations were identified and characterized by means of contact angle measurements, being a hydrophilic (hydrophobic) surface and the fingerprint of an Al- (OH-) terminated surface, respectively. The defects within the synthesized graphene were analyzed by Raman spectroscopy. Notably, we found that the ID/IG ratio decreases for graphene grown on OH-terminated surfaces. Furthermore, two different regimes related to the nature of graphene defects were identified and, depending on the sapphire terminated surface, are bound either to vacancy or boundary-like defects. Finally, studying the density of defects and the crystallite area, as well as their relationship with the sapphire surface termination, paves the way for increasing the crystallinity of the synthesized graphene., M.S.L. acknowledges financial support from the Generalitat Valenciana (Project: CIAPOS/2021/293). V.J.G. acknowledges financial support from the Generalitat Valenciana (CDEIGENT/ 2020/009). E.P.C. acknowledges financial support from the Generalitat Valenciana (SEJIGENT/2021/ 039). All authors acknowledge financial support from AGENCIA ESTATAL DE INVESTIGACIÓN of Ministerio de Ciencia e Innovacion (PID2020-118855RB-I00 and PID2021-128442NA-I00) and to the European Regional Development Fund (ERDF) (IDIFEDER/2020/041, IDIFEDER/2021/061). This study formed part of the Advanced Materials program and was supported by Ministerio de Ciencia e Innovacion (MCIN) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/025).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Publicidad engañosa, subliminal y etiquetado confuso: medidas para la protección del consumidor en la legislación española

  • García-García, Cristina
  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[EN] Objetive: This works aims to differentiate between subliminal and deceptive advertising, delving into the history and development of the latter, and expose the means and forms of deception commonly used by industries. Methodology: A review of the main doctrinal contributions on the matter has been carried out, as well as an analysis of the applicable legislation. Results: Likewise, both its current Spanish regulations and the existing regulations to protect the consumer are detailed. Limitations: The continuous growth and evolution of the use of misleading food advertising in recent decades has resulted in a consumer ignorant of the reality of their purchase. Conclusions: Every day there are more innovative products made up of ingredients totally unknown to the population. Consequently, companies take advantage of such ignorance to sell their product through misleading advertising and labelling., [ES] Objetivo: este trabajo tiene como objetivo diferenciar entre la publicidad subliminal y engañosa, ahondando en la historia, y el desarrollo de la última, y exponer los medios y formas de engaño comúnmente empleados por las industrias. Metodología: se ha realizado una revisión de las principales aportaciones doctrinales en la materia, así como un análisis de la legislación aplicable. Resultados: se detalla tanto su normativa española actual como la regulación existente para proteger al consumidor. Limitaciones: el continuo crecimiento y evolución del uso de la publicidad engañosa en alimentos en las últimas décadas, ha dado lugar a un consumidor que desconoce la realidad de su compra. Conclusiones: cada día son más los productos innovadores formados por ingredientes totalmente desconocidos por la población. En consecuencia, las empresas aprovechan tal desconocimiento para vender su producto a través de una publicidad y un etiquetado confuso.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Ley 12/2023, de 24 de mayo, por el derecho a la vivienda y las formas de acceso a la vivienda: referencia a las viviendas colaborativas

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[EN] This paper tries to analyze the different forms of access to housing contemplated in the recent Law 12/2023, of May 24, for the right to housing, which highlights protected housing and incentivized affordable housing. Along with this regulation, new forms of use such as collaborative housing constitute a way of accessing housing that may be of interest to certain groups and that has been the subject of regional regulation in Law 3/2023, of April 13, of collaborative housing in the Valencian Community and to which we are going to dedicate attention in relation to state regulations, [ES] En el presente trabajo se trata de analizar las distintas formas de acceso a la vivienda contempladas en la reciente Ley 12/2023, de 24 de mayo, por el derecho a la vivienda en el que destaca la vivienda protegida y la vivienda asequible incentivada. Junto a esta regulación, las nuevas formas de uso como la vivienda colaborativa constituye una forma de acceder a la vivienda que puede resultar de interés para determinados colectivos y que ha sido objeto de una regulación autonómica en la Ley 3/2023, de 13 de abril, de viviendas colaborativas de la Comunitat Valenciana y a la que vamos a dedicar atención en relación con la normativa estatal.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Exploiting the &quot, gold of the ocean&quot, : Can live storage solve the paradox of the purse seine fishery for Atlantic bluefin tuna in Norway?

  • Sistiaga, Manu
  • Anders, Neil
  • Saltskår, Jostein
  • Pettersen, Hermann
  • Breen, Michael
  • Humborstad, Odd-Borre
  • Peña, Hector
  • Olsen, Stein Harris
  • Jensen,Tonje Kristin
  • Ferter, Keno
  • Nottestad, Leif
  • Lokkeborg, Svein
  • Muñoz-Benavent, Pau|||0000-0003-4681-183X
  • Martínez-Peiró, Joaquín|||0000-0002-4430-9355
  • Andreu García, Gabriela|||0000-0001-5448-6171
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
[EN] The Norwegian quota for Atlantic bluefin tuna (ABT) ( Thunnus thynnus) is not completely caught every year. This is paradoxical because Norway is a leading fishing nation. The fishery is currently executed by rod-and-reel and purse seine, with similar to 80 % of the quota being allocated to the latter. Purse seine is therefore the main determinant for the overall success of the fishery and vessels aim to take catches that are manageable for their size (typical LOA < 40 m). These vessels are not designed to target ABT, so they tend to have variable capture efficiency, inadequate catch control technology and often produce inconsistent product quality of relatively low value. Furthermore, participation in more profitable fisheries with better shore-based infrastructure and marketing channels is prioritised over ABT fishing. The storage of purse seine caught ABT in cages is currently practiced worldwide but not in Norway. Storage allows on-demand supply to the market and can improve quality by allowing physiological recovery after capture. There is therefore great interest from Norwegian policymakers and industry in developing a live storage fishery. This manuscript investigates aspects related to ABT live storage in Norway. Findings are presented from sea trials exploring the feasibility of these procedures. Challenges that will determine the future perspective of Norwegian live storage are discussed, and the potential of alternatives such as longlines, traps and rod-and-reel is examined. Any future success in developing the Norwegian ABT fishery will serve as an example for other fisheries around the world facing similar challenges., was received for this work. All of the sources of funding for the work described in this publica-tion are acknowledged below:center dot Norwegian Institute of Marine Research.center dot Norwegian Directorate of Fisheries.center dot Norwegian Seafood Research Fund (Grant no. FHF-901755) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Subwavelength grating bimodal waveguide for refractive index sensing

  • Torrijos-Morán, Luis
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] Periodic subwavelength structures supporting two TE modes are presented as high performance sensors with bulk and surface sensitivities of 1375.5nm/RIU and 6.138nm/nm, respectively. A complete theoretical study is provided by numerical expressions and FDTD simulations.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Increasing the Performance of Data Centers by Combining Remote GPU Virtualization with Slurm

  • Iserte, Sergio
  • Reaño, Carlos
  • Prades, Javier|||0000-0003-3349-2200
  • Silla, Federico|||0000-0002-6435-1200
[EN] The use of Graphics Processing Units (GPUs) presents several side effects, such as increased acquisition costs as well as larger space requirements. Furthermore, GPUs require a non-negligible amount of energy even while idle. Additionally, GPU utilization is usually low for most applications. Using the virtual GPUs provided by the remote GPU virtualization mechanism may address the concerns associated with the use of these devices. However, in the same way as workload managers map GPU resources to applications, virtual GPUs should also be scheduled before job execution. Nevertheless, current workload managers are not able to deal with virtual GPUs. In this paper we analyze the performance attained by a cluster using the rCUDA remote GPU virtualization middleware and a modified version of the Slurm workload manager, which is now able to map remote virtual GPUs to jobs. Results show that cluster throughput is doubled at the same time that total energy consumption is reduced up to 40%. GPU utilization is also increased., This work was funded by Generalitat Valenciana under Grant PROMETEOII/2013/009 of the PROMETEO program phase II. The author from Universidad Jaume I was supported by project TIN2014-53495-R from MINECO and FEDER. The authors are grateful for the generous support provided by Mellanox Technologies and the equipment donated by NVIDIA Corporation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A More Realistic RTP/RTCP-Based Simulation Platform for Video Streaming QoS Evaluation

  • Boronat, Fernando|||0000-0001-5525-3441
  • Vidal-Gimeno, Vicente-Emilio|||0000-0002-2384-7015
  • Montagud Aguar, Mario
[EN] Over the last few years, the demand for real-time multimedia services has been growing progressively so that video streaming applications are expected to be dominant in future communications systems, and most of them using RTP/RTCP protocols. This paper presents an evolved tool-set for video streaming QoS evaluation in simulated environments using such protocols. We have designed a new NS-2 module with a full RTP/RTCP implementation (following strictly the RFC 3550) and we propose to combine it with additional multimedia tools to obtain an advanced simulation framework that allows the measurement of network-level QoS metrics (such as throughput, delay, jitter or loss rate) in simulation time. Besides, as the transmitted video files can be reconstructed and played out at the receiver side, the measurement of the quality of the delivered video streams, by employing the most common objective quality metrics (such as PSNR, SSIM or VQM) or subjective metrics (MOS), is also supported. By using this tool-set, researchers and practitioners can assess their novel designs (such as network protocols, routing strategies or video coding mechanisms) for such applications in heterogeneous scenarios over different network conditions. As RTCP feedback capabilities have been added, source based control techniques (such as rate adaptability or Multiple Description Coding) could be included and tested using this more realistic and powerful simulation platform., This work has been financed, partially, by Polytechnics University of Valencia (UPV), under its R&D Support Program in PAID-06-08-002-585 Project and in PAID-01-10, and by Generalitat Valenciana, under its R&D Support Program in GV 2010/009 Project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Biometric relationships and condition factor of Nile tilapia (Oreochromis niloticus) grown in concrete ponds with groundwater

  • Carrillo la-Rosa, Luis Lorenzo
  • Morell-Monzó, Sergio|||0000-0001-8883-2618
  • Puig Pons, Vicente|||0000-0002-8154-8259
  • Pérez Arjona, Isabel|||0000-0001-9010-6287
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
[EN] Atenolol (ATN), prednisone (PRED), and sulfamethoxazole (SMX) are widely used pharmaceuticals that persist in aquatic environments, posing risks to non-target organisms due to their individual and potentially synergistic toxic effects. This study investigates the degradation of these contaminants using electrochemical H₂O₂ generation (E-H₂O₂), applied alone and in combination with UV-C irradiation, with the aim of advancing water treatment technologies. The system employed an electrochemical reactor with a gas diffusion electrode (GDE) as the cathode and a cation-exchange membrane to prevent H₂O₂ oxidation at the anode. A solid electrolyte was used for proton conduction to enhance practicality and reduce chemical inputs, and ionic adsorption capabilities were demonstrated, promoting electrostatic interactions with the PhACs. At an optimized current density of 30 mA cm⁻², contaminant degradation was evaluated under UV-C, E-H₂O₂, and the combined E-H₂O₂/UV-C process. The E-H₂O₂/UV-C system achieved the highest degradation efficiency, attaining extensive removal of the contaminants within 15 min, breaking them down into simpler carboxylic acids and showing no phytotoxicity in Allium cepa bioassays. However, GDE characterization revealed morphological changes and catalyst loss after extended use, potentially affecting the stability and efficiency of H₂O₂ generation. These findings indicate that the E-H₂O₂/UV-C system holds strong potential for water treatment applications targeting multi-contaminant degradation, while underscoring the need to develop more durable cathode materials to ensure sustained performance under prolonged operational conditions., This study is part of the ThinkInAzul programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (GVA-THINKINA- ZUL/2021/009; Principal Investigator: V. Espinosa Rosello, Universitat Politecnica de Valencia). Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

High performance photonic biosensors based on periodic configurations

  • García-Rupérez, Jaime|||0000-0002-2036-0084
  • Gómez-Gómez, María Isabel|||0000-0001-7548-209X
  • Ponce-Alcántara, Salvador|||0000-0002-7479-8129
  • Torrijos-Morán, Luis
  • Martinez-Perez, Paula
[EN] Periodic photonic configurations as photonic crystals (PhCs) and subwavelength grating (SWG) waveguides are gaining a renewed interest for the development of biosensing structures. By performing a proper design, these periodic configurations allow a significant sensitivity increase while keeping a compact footprint, what is achieved by exploiting concepts such as the slow-wave effect, the increase of the light-matter overlap or the interference of dispersion engineered modes., These results were achieved thanks to the funding received from the European Union (ICT-644242-SAPHELY, PHC634013-PHOCNOSIS and the operational program of the European Regional Development Fund (FEDER) of the Valencia Regional Government 2014¿2020), the Spanish Government (TEC2015-63838-C3-1-R-OPTONANOSENS and PID2019-106965RB-C21-PHOLOW), the Generalitat Valenciana (AVANTI/2019/123, ACIF/2019/009 and PPC/2020/037), the Universitat Politècnica de València (PAID-01-17, PAID-01-18 and OCUSENSOR).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Transcranial focusing of ultrasonic vortices by acoustic holograms

  • Jiménez-Gambín, Sergio
  • Jimenez, Noe|||0000-0002-6539-670X
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] Acoustic vortex beams have great potential for contactless particle manipulation and torque-based biomedical applications. However, when focusing acoustic waves through aberration layers such as the human skull at ultrasonic frequencies results in strong phase aberrations which prevent the generation of sharp acoustic images. In the case of a wavefront containing phase dislocations, skull aberrations inhibit the focusing of acoustic vortex beams inside the cranial cavity. In this work, we demonstrate that phase-conjugated acoustic holograms can encode time-reversed fields simultaneously allowing the compensation of the aberrations of the skull and the generation of a focused vortex inside an ex-vivo human skull. The method is applied for single-element geometrically focused sources and results in a very simple and compact ultrasonic system. This work will pave the road to design low-cost particle trapping applications, clot manipulation, torque exertion in the brain and acoustic-radiation-force based biomedical applications., This research was supported by the Spanish Ministry of Science, Innovation, and Universities through "Juan de la Cierva-Incorporacion" Grants No. IJC2018-037897-I and No. PID2019-111436RB-C22, by the Agencia Valenciana de la Innovacio through Grants No. INNVAL10/19/016, No. INNVA1/2020/92, and No. INNCON/2020/009, and by the Generalitat Valenciana through Grant No. ACIF/2017/045. The action was cofinanced by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana, Grant No. IDIFEDER/2018/022.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Colloidal processing of fully stabilized zirconia laminates comprising graphene oxide-enriched layers

  • Rincón, Acacio
  • Moreno, Rodrigo
  • Gutierrez González, Fidel Carlos
  • Sainz, Raquel
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
Multilayer materials have demonstrated to provide an efficient mechanism for toughening by deflection of a propagating crack by weak interlayers. Therefore, the aim of this work is to study the colloidal processing of 8 mol% yttria stabilized zirconia (8YSZ) based laminates by intercalating thin layers of graphene enriched with 8YSZ, and to evaluate the advantages of such multilayered structure in the propagation of cracks induced by indentation. Green tapes of 8YSZ and graphene-oxide with YSZ were obtained by aqueous tape casting and sintered in one-step by spark plasma sintering at 1400 degrees C. Microindentation results showed that the indentation cracks propagate within the horizontal direction within the ceramic layer, but in the cross-sectional direction the presence of the GO-rich layers stops the cracks without deflection or bifurcation. The hardness and elastic modulus values were higher than 17.6 GPa and 230 GPa, respectively, and similar for all layers., This work has been supported by the Spanish Ministry of Economy and Competitiveness (project MAT2015-67586-C3-R) and the Generalitat Valenciana by the financial support for the GV/2014/009 project. M.D. Salvador thanks to CAPES-Programa Ciencias sem Fronteiras (Brazil) for the concession of a PVE project No. A086/2013. A. Borrell, acknowledges the Spanish Ministry of Economy and Competitiveness for her Juan de la Cierva-Incorporacion contract (IJCI-2014-19839).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modeling COVID-19 with Uncertainty in Granada, Spain. Intra-Hospitalary Circuit and Expectations over the Next Months

  • Garrido, Jose M.
  • Rodriguez-Serrano, Fernando
  • Martínez-Rodríguez, David|||0000-0002-2093-7840
  • Sferle, Sorina Madalina|||0000-0002-2028-1191
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
[EN] Mathematical models have been remarkable tools for knowing in advance the appropriate time to enforce population restrictions and distribute hospital resources. Here, we present a mathematical Susceptible-Exposed-Infectious-Recovered (SEIR) model to study the transmission dynamics of COVID-19 in Granada, Spain, taking into account the uncertainty of the phenomenon. In the model, the patients moving throughout the hospital's departments (intra-hospitalary circuit) are considered in order to help to optimize the use of a hospital's resources in the future. Two main seasons, September-April (autumn-winter) and May-August (summer), where the hospital pressure is significantly different, have been included. The model is calibrated and validated with data obtained from the hospitals in Granada. Possible future scenarios have been simulated. The model is able to capture the history of the pandemic in Granada. It provides predictions about the intra-hospitalary COVID-19 circuit over time and shows that the number of infected is expected to decline continuously from May without an increase next autumn-winter if population measures continue to be satisfied. The model strongly suggests that the number of infected cases will reduce rapidly with aggressive vaccination policies. The proposed study is being used in Granada to design public health policies and perform wise re-distribution of hospital resources in advance., This research was funded by the Spanish Ministerio de Economia, Industria y Competitividad (MINECO), the Agencia Estatal de Investigacion (AEI) and Fondo Europeo de Desarrollo Regional (FEDER UE) grant MTM2017-89664-P and the European Union through the Operational Program of the [European Regional Development Fund (ERDF)/European Social Fund (ESF)] of the Valencian Community 2014-2020. Files: GJIDI/2018/A/010 and GJIDI/2018/A/009 and the Ramon Areces Foundation, Madrid, Spain (CIVP18A3920).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Datos de salud, datos especialmente protegidos: el caso de los datos biométricos y su comercialización

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[EN] The recent news about iris scanning in exchange for cryptocurrency raises an intense debate about health data, biometric data and their commercia- lization. Ignorance about the consequences that it can have in the field of privacy and identity theft of unique information of the person determines that commercial transactions are carried out with a lack of information in this regard. Artificial intelligence can help control risk, which is why we are faced with an opportunity for the future. The need to pro- tect sensitive data must be prioritized in any case and avoid cases as dangerous as the one analyzed in the future., [ES] La reciente noticia sobre el escaneo del iris a cam- bio de criptomonedas plantea un intenso debate sobre los datos de salud, los datos biométricos y su comer- cialización. El desconocimiento sobre las consecuen- cias que puede tener en el ámbito de la privacidad y la suplantación de identidad de una información única de la persona determina que se realicen transacciones co- merciales con una falta de información al respecto. La inteligencia artificial puede ayudar al control del riesgo por lo que nos encontramos ante una oportunidad de futuro. La necesidad de protección de datos sensibles debe priorizarse en todo caso y evitar casos tan peli- grosos como el analizado en el futuro, Trabajo realizado en el marco del Grupo de Investigación de Excelencia Generalitat Valenciana Algorithmical Law (Proyecto Prometeu 2021/009, 2021-2024), y Proyecto Derechos y garantías públicas frente a las decisiones automatizadas y el sesgo y discriminación algorítmicas 2023-2025 (PID2022-136439OB-I00) financiado por MCIN/AEI/10.13039/501100011033/ FEDER, UE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hydrothermal Degradation Behavior of Y-TZP Ceramics Sintered by Nonconventional Microwave Technology

  • PRESENDA-BARRERA, ALVARO
  • Moreno, Rodrigo
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
Different factors such as the characteristics of starting powders, their processing, the sintering technique and the final sintering temperature were assessed with the goal to improve the low-temperature degradation (LTD) resistance of 3Y-TZP materials without compromising on the mechanical properties. The degradation of hydrothermally treated specimens was studied by AFM, nanoindentation technique, micro-Raman spectroscopy, and electron microscopy. 3Y-TZP previously prepared in laboratory by colloidal processing, and sintered by microwave method at low temperature (1200 degrees C) led to excellent mechanical and LTD resistance, as compared to dental restorations based on Y-TZP commercial material. In the former, the presence of m-phase was almost nonexistent even after 200 h of exposure to LTD conditions and the initial mechanical properties were maintained, giving 16 and 250 GPa mean values for hardness and Young's modulus, respectively. The influence of the fast-technology by microwave heating is presented with a nonconventional sintering method to fabricate 3Y-TZP ceramics for dental application with very high resistance against LTD and optimized mechanical properties., Presenda acknowledges the Generalitat Valenciana for his Santiago Grisolia scholarship (GRISOLIA/2013/035). A. Borrell acknowledges the Spanish Ministry of Science and Innovation for her Juan de la Cierva contract (JCI-2011-10498) and the Generalitat Valenciana for the financial support under the GV/2014/009 project. M. D. Salvador thanks CAPES - Programa Ciencias sem Fronteiras (Brazil) for the concession of a PVE project No. A086/2013.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Deep learning-based keypoint detection for 3D biometric measurement of tuna using underwater stereo vision

  • Martínez-Peiró, Joaquín|||0000-0002-4430-9355
  • Muñoz-Benavent, Pau|||0000-0003-4681-183X
  • Andreu García, Gabriela|||0000-0001-5448-6171
  • Puig Pons, Vicente|||0000-0002-8154-8259
  • Espinosa, Víctor
[EN] Accurate and scalable estimation of tuna size during transfer and farming operations is essential for stock assessment and management. This study presents a fully automatic processing pipeline that combines deep learning-based keypoint detection with stereoscopic vision geometry to estimate fish length, height, and width from underwater stereoscopic imagery. The system exploits videos acquired while freely swimming fish under real underwater conditions from two different viewpoints: a lateral view, from which length and height are measured, and a ventral view, which provides length and width. Having measurements of individual fish in all three dimensions can significantly improve the accuracy of estimating biomass and schools for large-bodied species. For each view, a Keypoint R-CNN model was trained on heterogeneous datasets of 850 stereo pairs annotated independently by three human operators. To account for annotation variability, per-keypoint normalization constants were computed and used to adapt COCO-style Object Keypoint Similarity (OKS) metrics to this domain. The proposed Keypoint R-CNN system achieved 2D keypoint localization accuracy comparable to human annotators (mean OKS = 0.91). The resulting 3D biometric measurements yielded relative errors of approximately 1%-2% for length-related dimensions and 2%-5% for height and width, within the range observed for inter-annotator variability. Measurement bias remained below 0.2% for all evaluated dimensions, and no systematic over-or under-estimation trends were observed. Automatic and manual size distributions were statistically indistinguishable, while processing throughput was compatible with offline operational analysis requirements. Overall, the proposed approach provides a reliable and scalable foundation for automated 3D size monitoring in tuna aquaculture., This study forms part of the ThinkInAzul programme and was supported by the MCIN with Funding from the European Union's NextGenerationEU (PRTR-C17.I1) and the Generalitat Valenciana (THINKINAZUL/2021/007 and THINKINAZUL/2021/009). This work was supported by funding from UPV (PAID-01-23 and PAID-10-22) and ACTTHUN project grant ref. PID2021-127426OB-C21 funded by MICIU/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Testamentos y personas con discapacidad sensorial (Ley 8/2021)

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[ES] El otorgamiento de testamento por parte de las personas que sufren una discapacidad es una de las cuestiones que ha sido objeto de reforma en el ámbito del Derecho civil por la reciente Ley 8/2021. Las distintas formas testamentarias se han visto afectadas. Nos dedicamos en este trabajo a analizar los distintos problemas que se pueden plantear en relación con los testamentos, dedicando también nuestra atención a las personas con discapacidad antes y después de este cambio normativo, y durante el periodo de pandemia, precisamente en un tiempo en el que la tecnología todavía no se aplica en toda su amplitud en el ámbito sucesorio, [EN] The granting of a will by people who suffer from a disability is one of the issues that has been subject to reform in the field of civil law by the recent Law 8/2021. We dedicate ourselves in this work to analyze the different problems that can arise in relation to wills, also dedicating our attention to people with disabilities before and after this regulatory change, and during the pandemic period, precisely at a time in the that the technology is not yet applied to its full extent in the area of inheritance
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of graphene and CNFs addition on the mechanical and electrical properties of dense alumina-toughened zirconia composites

  • Rincón, Acacio
  • Moreno, Rodrigo
  • Chinelatto, Adriana S. A.
  • Gutierrez, Carlos F.
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
Fully dense carbon/alumina-toughened zirconia composites were prepared by using a combination of aqueous colloidal powder processing and spark plasma sintering technique (SPS). Various carbon elements were introduced in alumina-toughened zirconia matrix (ZA) as filler; carbon nanofibers (CNFs) and graphene oxide (GO). The influence of the addition of different carbon forms on the microstructure and on the mechanical and electrical properties was investigated. In the case of the ZAGO composites, the SPS technique allowed, in one-step, the in situ reduction of the graphene oxide during the sintering process. The fracture toughness increases for ZAGO composites in comparison to the ZA material while the hardness decreases slightly with carbon elements addition. The electrical conductivity of the ZA composite drastically increased with the addition of graphene oxide, and it reached 10 Omega cm at 2 vol%. Crown, A. Borrell acknowledges the Spanish Ministry of Economy and Competitiveness for her Juan de la Cierva contract (JCI-2011-10498) and the Generalitat Valenciana by the financial support for the GV/2014/009 project. M.D. Salvador thanks to CAPES - Programa Ciencias sem Fronteiras (Brazil) for the concession of a PVE project No. A086/2013. A.S.A. Chinelatto thanks to CAPES for the concession of a post-doctoral fellowship in ICV-CSIC.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Los animales de compañía y su destino en el ámbito sucesorio, Pet animals and their fate in the field of succession

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[ES] Se analiza en la propuesta presentada el régimen aplicable tras la Ley 17/2021, de 15 de diciembre, de modificación del Código Civil, la Ley Hipotecaria y la Ley de Enjuiciamiento Civil, sobre el régimen jurídico de los animales, en la que se considerados como seres dotados de sensibilidad, se añade un artículo 914 bis sobre la disposición mortis causa de los animales de compañía, [EN] The proposal presented analyzes the applicable regime after Law 17/2021, of December 15, modifying the Civil Code, the Mortgage Law and the Law of Civil Procedure, on the legal regime of animals, in which they are considered as beings endowed with sensitivity, an article 914 bis is added on the disposition mortis causa of pet animals., Trabajo realizado en el marco del Proyecto I+D+i ¿Retos investigación¿ del Programa estatal de I+D+i orientado a los Retos de la Sociedad del Ministerio de Ciencia, Innovación y Universidades RTI2018-097354-B-100 (2019- 2022), Proyecto de I+D+i Retos MICINN PID2019-108710RB-I00, (2020-2022), y Grupo de Investigación de Excelencia Generalitat Valenciana (Proyecto Prometeu 2021/009, 2021-2024).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Exploring the interoperability of remote GPGPU virtualization using rCUDA and directive-based programming models

  • Castelló, Adrián|||0000-0002-8576-8451
  • Quintana-Ortí, Enrique S.|||0000-0002-5454-165X
  • Peña Monferrer, Antonio José
  • Mayo Gual, Rafael
  • Planas,Judit
  • Balaji, Pavan
[EN] Directive-based programming models, such as OpenMP, OpenACC, and OmpSs, enable users to accelerate applications by using coprocessors with little effort. These devices offer significant computing power, but their use can introduce two problems: an increase in the total cost of ownership and their underutilization because not all codes match their architecture. Remote accelerator virtualization frameworks address those problems. In particular, rCUDA provides transparent access to any graphic processor unit installed in a cluster, reducing the number of accelerators and increasing their utilization ratio. Joining these two technologies, directive-based programming models and rCUDA, is thus highly appealing. In this work, we study the integration of OmpSs and OpenACC with rCUDA, describing and analyzing several applications over three different hardware configurations that include two InfiniBand interconnections and three NVIDIA accelerators. Our evaluation reveals favorable performance results, showing low overhead and similar scaling factors when using remote accelerators instead of local devices., The researchers from the Universitat Jaume I de Castello were supported by Universitat Jaume I research project (P11B2013-21), project TIN2014-53495-R, a Generalitat Valenciana grant and FEDER. The researcher from the Barcelona Supercomputing Center (BSC-CNS) Lausanne was supported by the European Commission (HiPEAC-3 Network of Excellence, FP7-ICT 287759), Intel-BSC Exascale Lab collaboration, IBM/BSC Exascale Initiative collaboration agreement, Computacion de Altas Prestaciones VI (TIN2012-34557) and the Generalitat de Catalunya (2014-SGR-1051). This work was partially supported by the U.S. Dept. of Energy, Office of Science, Office of Advanced Scientific Computing Research (SC-21), under contract DE-AC02-06CH11357. The initial version of rCUDA was jointly developed by Universitat Politecnica de Valencia (UPV) and Universitat Jaume I de Castellon (UJI) until year 2010. This initial development was later split into two branches. Part of the UPV version was used in this paper. The development of the UPV branch was supported by Generalitat Valenciana under Grants PROMETEO 2008/060 and Prometeo II 2013/009. We gratefully acknowledge the computing resources provided and operated by the Joint Laboratory for System Evaluation (JLSE) at Argonne National Laboratory.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Can family CEOs promote enterprises&apos, digital transformation? An analysis based on ability-willingness paradox

  • He, Qiuqin
  • Lassala, Carlos
  • Currás Móstoles, María Rosa|||0000-0001-8392-568X
[EN] It is crucial to investigate the characteristics of digital transformation strategy decision-making in family businesses. In this paper, the Chinese A-share listed family enterprises on the Shanghai and Shenzhen stock markets from 2008 to 2020 are used as a sample to analyze at how the CEO source affects the enterprises¿ digital transformation and how the CEO ability and family willingness affect the boundary conditions of the decision-making. According to the findings of the study, family CEOs are more capable of promoting the digital transformation of family businesses. Whether it is general human capital obtained through formal education or firm-specific human capital obtained through work experience, they all positively moderate the relationship between family CEOs and enterprises¿ digital transformation decisions. Surprisingly, family control and influence have no moderating effect, which may be due to the superimposition of the willingness to pursue growth, whereas the willingness to pursue transgenerational sustainability is a negative moderator, indicating that family businesses in China are still in the early stages of succession. This study not only uncovers the disparities in the impacts of different types of CEOs on the digital transformation of family businesses, but also provides empirical evidence and managerial implications for fostering the family businesses¿ digital transformation., This research was supported by Zhejiang Provincial Philosophy and Social Science Planning Project under Grant No. 24NDQN009YB & No. 23LLXC036YB, Zhejiang Provincial Natural Science Foundation of China under Grant No. LQ23G020004, Hangzhou Municipal Philosophy and Social Science Planning Project under Grant No. 2023QNRC13.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Uncertainty and sensitivity of the sexual behavior changes to the current Human Papillomavirus (HPV) vaccination campaign in Spain

  • Acedo Rodríguez, Luis
  • Díez-Domingo, Javier
  • Sánchez-Alonso, Víctor
  • Tuells, José
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
[EN] Taking into account the public health importance of the human papillomavirus (HPV) control in the future, it is mandatory to assess the effect of the vaccination campaigns on the control of HPV spread and the associated diseases using reliable mathematical models. We propose a computational random network model with the aim of studying the transmission dynamics of HPV infections. This model reflects the herd immunity effect in the heterosexual network more accurately than the classical models. We perform a sensitivity analysis of the sexual behavior changes consisting of increasing the number of men who have sex with men (MSM), increasing the frequency of the intercourses and increasing the number of sexual partners. We find that large changes in the sexual behavior, in some extent, only have minor effects on the decline of the HPV infections in women and men in the current vaccination campaign in Spain (vaccination of young girls with a coverage of 70%). Therefore, the current vaccination program in Spain is robust for the heterosexuals. However, we cannot say the same for MSM, where they do not benefit by the herd immunity effect of the vaccination of girls, and consequently, the circulation of the virus among them remains unchanged. A consequence of the present study is that the effect of other external factors that may affect the transmission dynamics of the HPV, for instance, the tourism or the immigration, does not influence the protection provided by the current Spanish vaccination program., Operational Program of the [European Regional Development Fund (ERDF)/European Social Fund (ESF)] of the Valencian Community 2014-2020, Grant/Award Number: GJIDI/2018/A/010 and GJIDI/2018/A/009; Spanish Ministerio de Economia, Industria y Competitividad (MINECO), Grant/Award Number: MTM2017-89664-P
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Los contratos agrarios valencianos, la soberanía alimentaria y la pandemia, Valencian agrarian contracts, food sovereignty and the pandemic

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[ES] La contratación agraria en la Comunitat Valenciana (España) se relaciona con el espacio de la Huerta y el comercio de proximidad de productos agrarios. La influencia de la costumbre valenciana se muestra en el ámbito agrario y ha sido recogida en la legislación analizada. El objetivo de este estudio es dar a conocer la forma de venta a través de La Tira de Contar mediante la cual el agricultor potencia una cultura local y la soberanía alimentaria mediante esta singular forma de transacción, y las consecuencias que ha tenido la pandemia en el ámbito agrario valenciano. La metodología utilizada ha sido el análisis de la legislación y la aportación de la doctrina sobre esta materia. Como principales resultados se puede indicar que la protección de la legislación de los contratos agrarios y de la Huerta permiten la pervivencia de un sector que se ha visto afectado por factores económicos. La forma analizada de venta y la costumbre se mantienen a lo largo del tiempo y muestran un ejemplo de adaptación de la agricultura. La crisis sanitaria por la pandemia ha producido efectos negativos y denota que la agricultura debe ser objeto de una futura modernización a través de las nuevas tecnologías., [EN] mmunity (Spain) is related to the Huerta area and the proximity trade of agricultural products. The influence of the Valencian custom is shown in the agricultural field and has been included in the legislation analyzed. The objective of this study is to publicize the form of sale through La Tira de Contar through which the farmer promotes a local culture and food sovereignty through this unique form of transaction, and the consequences that the pandemic has had on the Valencian agricultural area. The methodology used has been the analysis of the legislation and the contribution of the doctrine on this matter. As main results we can indicate that the protection of the legislation of the agrarian contracts and of the Huerta allow the survival of a sector that has been affected by economic factors. The analyzed form of sale and the custom are maintained over time and show an example of adaptation of agriculture. The health crisis caused by the pandemic has produced negative effects, and denotes that agriculture must be subject to future modernization through new technologies., Trabajo realizado en el marco del Proyecto I+D+i «Retos investigación» del Programa estatal de I+D+i orientado a los Retos de la Sociedad del Ministerio de Ciencia, Innovación y Universidades RTI2018-097354-B-100 (2019-2022) y Proyecto de I+D+i Retos MICINN (PID2019-108710RB-I00, 2020-2022), y Grupo de Investigación de Excelencia Generalitat Valenciana ¿Algorithmical Law¿ (Proyecto Prometeu 2021/009, 2021-2024).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Los datos de salud electrónicos. Una aproximación al Reglamento (UE) 2025/327

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[ES] El Reglamento (UE) 2025/327 regula el Espacio Europeo de Datos de Salud. El uso primario y secunda-rio de los datos de salud electrónicos plantean distintas cuestiones en el ámbito jurídico teniendo en cuenta la aplicación de la inteligencia artificial y la protección de datos personales. Nos proponemos analizar estas cuestiones y aportar soluciones de interés para vislumbrar las consecuencias que supone una integración global de la información sanitaria., Trabajo realizado en el marco del Grupo de Investigación de Excelencia Generalitat Valenciana Algorithmical Law (Proyecto Prometeu 2021/009, 2021-2024), y Proyecto Derechos y garantías públicas frente a las decisiones automatizadas y el sesgo y discriminación algorítmicas 2023-2025 (PID2022-136439OB-I00) financiado por MCIN/AEI/10.13039/501100011033/ FEDER, UE y Grupo de Investigación de Excelencia Generalitat Valenciana (Proyecto Prometeu CIPROM/2024/16, Algorithmic Law, 2025-2029).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A full probabilistic analysis of a randomized kinetic model for reaction-deactivation of hydrogen peroxide decomposition with applications to real data

  • Cortés, J.-C.|||0000-0002-6528-2155
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
  • Navarro-Quiles, A.
[EN] The classical kinetic equation has been broadly used to describe reaction and deactivation processes in chemistry. The mathematical formulation of this deterministic nonlinear differential equation depends on reaction and deactivation rate constants. In practice, these rates must be calculated via laboratory experiments, hence involving measurement errors. Therefore, it is more realistic to treat these rates as random variables rather than deterministic constants. This leads to the randomization of the kinetic equation, and hence its solution becomes a stochastic process. In this paper we address the probabilistic analysis of a randomized kinetic model to describe reaction and deactivation by catalase of hydrogen peroxide decomposition at a given initial concentration. In the first part of the paper, we determine closed-form expressions for the probability density functions of important quantities of the aforementioned chemical process (the fractional conversion of hydrogen peroxide, the time until a fixed quantity of this fractional conversion is reached and the activity of the catalase). These expressions are obtained by taking extensive advantage of the so called Random Variable Transformation technique. In the second part, we apply the theoretical results obtained in the first part together with the principle of maximum entropy to model the hydrogen peroxide decomposition and aspergillus niger catalase deactivation using real data excerpted from the recent literature. Our results show full agreement with previous reported analysis but having as additional benefit that they provide a more complete description of both model inputs and outputs since we take into account the intrinsic uncertainties involved in modelling process, This work has been supported by the Spanish Ministerio de Economia, Industria y Competitividad (MINECO), the Agencia Estatal de Investigacion (AEI) and Fondo Europeo de Desarrollo Regional (FEDER UE) Grant MTM2017-89664-P. Computations have been carried thanks to the collaboration of Raul San Julian Garces and Elena Lopez Navarro Granted by European Union through the Operational Program of the European Regional Development Fund (ERDF)/European Social Fund (ESF) of the Valencian Community 2014-2020, Grants GJIDI/2018/A/009 and GJIDI/2018/A/010, respectively
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

La prodigalidad: una figura discutida y discutible. A propósito de su supresión como &quot, institución autónoma&quot, por la Ley 8/2021, Prodigality: a discussed and questionable figure. On the purpose of its suppression as an «autonomous institution» by law 8/2021

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[EN] This study analyzes prodigality, an emblematic figure in family law, and its situation after its suppression as an «autonomous institution» after Law 8/2021, of June 2, which reforms the civil law and procedure to support people with disabilities in the exercise of their legal capacity. It deals with some aspects such as its opportunity and some questions are formulated in relation to its regulation or lack of it, such as whether the prodigal person is a person with a disability. Along with this, the study is also contrasted with the regulation in the Civil Code of Catalonia with reference to the figure of assistance in Decree Law 19/2021, of August 31, by which it is adapted to the reform of the procedure for judicial modification of capacity, and some conclusions of interest are established., [ES] En el presente estudio se analiza la prodigalidad, figura emblemática en el Derecho de familia, y su situación después de su supresión como «institución autónoma» tras la Ley 8/2021, de 2 de junio, por la que se reforma la legislación civil y procesal para el apoyo a las personas con discapacidad en el ejercicio de su capacidad jurídica. Se trata algunos aspectos como su oportunidad y se formulan algunas cuestiones en relación con su regulación o ausencia de la misma, tales como si la persona pródiga es una persona con discapacidad. Junto a ello, también se contrasta el estudio con la regulación en el Código Civil de Cataluña con referencia a la figura de la asistencia en el Decreto Ley 19/2021, de 31 de agosto, por el que se adapta el mismo a la reforma del procedimiento de modificación judicial de la capacidad, y se establecen unas conclusiones de interés., Trabajo realizado en el marco del Proyecto I+D+i «Retos investigación» del Programa estatal de I+D+i orientado a los Retos de la Sociedad del Ministerio de Ciencia, Innovación y Universidades: RTI2018-097354-B-100 (2019-2022), Proyecto de I+D+i Retos MICINN (PID2019-108710RB-I00, 2020-2022), y Grupo de Investigación de Excelencia Generalitat Valenciana (Proyecto Prometeu 2021/009, 2021-2024)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Biblioteca y Metaverso: realidad virtual e inteligencia artificial en un escenario paralelo

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[ES] Los nuevos escenarios digitales en los que las tecnologías posibilitan mundos virtuales ofrecen interesantes perspectivas para las bibliotecas y los lectores. El denominado metaverso puede generar actividades para la inmersión de los lectores más allá de la lectura digital, pueden crear escenarios para que el lector pueda convertirse en protagonista de la novela, y viva las mismas experiencias en un escenario ad hoc. Aspectos como la accesibilidad, el aprendizaje a través del juego, la eliminación de cualquier tipo de barrera, representa el acceso a un escenario ilimitado, en el que hay una libertad de movimientos y de participación, en el que el verdadero protagonista es la persona usuaria del servicio. Las bibliotecas se enfrentan a un doble reto: formación y presencia, que además es bilateral por parte de los bibliotecarios y de los usuarios. ¿Seremos capaces de interactuar en el metaverso? ¿Qué riesgos podemos asumir?, Trabajo realizado en el marco del Proyecto I+D+i Retos investigación del Programa estatal de I+D+i orientado a los Retos de la Sociedad del Ministerio de Ciencia, Innovación y Universidades: RTI2018-097354-B-100 (2019-2022) y del Proyecto de I+D+i Retos de Investigación, MICINN, del Programa Estatal de I+D+i orientada a los retos de la sociedad (PID2019-108710RB-I00, 2020-2022), y Grupo de Investigación de Excelencia Generalitat Valenciana Algorithmical Law (Proyecto Prometeu 2021/009, 2021-2024).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

El trabajo a distancia, la conciliación familiar y los Objetivos de Desarrollo Sostenible, Remote work, family balance and the sustainable development goals

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[EN] During the COVID-19 pandemic, remote work represented a radical change in the employment landscape. Subsequently, various situations such as the DANA (Dangerous Digital Disability Act) have led to the need to carry out work remotely in the face of risky situations. Remote work is not always a way to achieve work-life balance, especially for women, who, far from having more time, are forced into endless days to attend to work, their descendants, and ascendants, entering a vicious cycle of inability to disconnect and increasing discriminatory bias. With artificial intelligence, where the use of resources can streamline work, we wonder if we are truly facing a new reality or if it represents a substantial increase in workload. The lack of adequate instruments to articulate sufficient guarantees to eliminate the digital divide also increases discrimination in remote work, which, far from being an opportunity for work-life balance, becomes a handicap. The Sustainable Development Goals have become a utopia, and resources must be established to achieve them. In conclusion, we can highlight the need for specific legislation to prevent difficulties in reconciliation, as well as establishing valid tools to avoid overcrowding and discriminatory biases, Trabajo realizado en el marco del Grupo de Investigación de Excelencia Generalitat Valenciana Algorithmical Law (Proyecto Prometeu 2021/009, 2021-2024), y del proyecto de I+D+i Derechos y garantías públicas frente a las decisiones automatizadas y el sesgo y discriminación algorítmicas [2023- 2026] (PID2022-136439OB-I00), financiado por MCIN/AEI/10.13039/501100011033/ y FEDER Una manera de hacer Europa .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Modification of porous nickel electrodes with silver nanoparticles for hydrogen production

  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Medina, R.
  • Taymans, P.
  • González-Buch, C.
  • Sánchez-Loredo, G.
  • Labrada-Delgado, G.J.
[EN] Silver nanoparticles were electrodeposited into the surface of a macroporous Ni electrode. The developed electrodes were characterized morphologically by confocal laser scanning microscopy and field emission scanning electron microscopy. The activity of the developed electrodes towards the hydrogen evolution reaction was assessed by pseudo-steady-state polarization curves and electrochemical impedance spectroscopy in alkaline solutions at different temperatures. The incorporation of the silver nanoparticles on the surface of the electrode improved the catalytic activity towards the hydrogen evolution reaction due to an improvement in the electrochemically active surface area rather than in the intrinsic catalytic activity., This work was partially supported by the Fondo FONSEC-SRE Mexico-Argentina en Nanotecnologia (CONACyT-ANPCYT), Projects 0191145-PICT2012-3081. Ramiro Medina wishes to thank to the CONACYT for the postgraduate grant (304413 + Beca mixta).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hybrid dielectric-graphene nanostructured SERS substrates for antibody sensing

  • Redolat-Querol, Javier Abilio
  • Pérez, Maria Camarena
  • Zorina, Sofiya
  • Zafra, Eva
  • Alonso Chornet, Mar
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • González-Llacer, Ignacio
  • Díaz-Escobar, Evelyn
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
[EN] We present a hybrid surface-enhanced Raman spectroscopy (SERS) platform based on a nanostructured silicon substrate integrated with functionalized graphene for the selective detection of biomolecules such as prolactin and SARS-CoV-2 antibodies. The high-index substrate comprises an array of subwavelength silicon nanopillars that support Mie-type optical resonances, enabling strong electromagnetic field confinement with minimal heating and optical losses. Graphene monolayers are transferred onto the nanopillar array and functionalized using 1-pyrenebutanoic acid succinimidyl ester (PBASE), thus facilitating the selective immobilization of target antibodies via ¿¿¿ interactions and covalent bonding. Graphene transfer, functionalization, and analyte binding are confirmed by the SERS enhancement, which enables label-free detection at low laser power, avoiding photodamage and ensuring compatibility with sensitive biomolecules. Strain and doping analysis, performed through Raman vector decomposition, reveals distinct responses associated with each antibody, validating the sensor's capability for molecular discrimination., A. M. and E. P. C acknowledge funding from Generalitat Valenciana (GVA) under grants CIPROM/2022/14 (NIRVANA) and AP2020-33 (GRAFEBIOCOV). E. P. C. further acknowledges financial support from the GVA through grant SEJIGENT/2021/ 039, Agencia Estatal de Investigaci¿on, Ministerio de Ciencia, Innovación y Universidades (MCIN/AEI), through project PID2021-128442NA-I00 and through grant CNS2024-154922, funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. M.S.L. and V. J. G. acknowledge financial support from the GVA through grants CIAPOS/2021/293, CDEIGENT/2020/009, and ESGENT/2024/17; and MCIN/AEI through project PID2020-118855RB-I00. M. S. L. also acknowledges support from the Ayuda a Primeros Proyectos de Investigación (PAID-06-24), funded by the Vicerrectorado de Investigación of the Universitat Politècnica de València (UPV). V. J. G. further acknowledges support from the MCIN/AEI through grant CNS2023-145093, funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. M. C. P. acknowledges the SPARCLE consortium, and Delft University of Technology. This study also forms part of the Advanced Materials program supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by GVA through project MFA/2022/025 (ARCANGEL).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Bio-Photonic Sensing Cells over transparent substrates for anti-gestrinone antibodies biosensing

  • Sanza, F.J.
  • Holgado, M.
  • Ortega Higueruelo, Francisco José
  • Casquel Del Campo, Rafael
  • López-Romero, D.
  • Laguna, Mari Fe
  • Barrios, C.A.
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Puchades, Rosa|||0000-0002-9329-1593
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] In a previous work we introduced the term Bio-Photonic Sensing Cells (BICELLs), referred to periodic networks of nano-pillar suitable for biosensing when are vertically interrogated. In this article, we demonstrate the biosensing capabilities of a type of micrometric size BICELLs made of SU-8 nano-pillars fabricated over transparent substrates. We verify the biochips functionality comparing the theoretical simulations with the experimental results when are optically interrogated in transmission. We also demonstrate a sensitivity enhancement by reducing the pitch among nano-pillars from 800 to 700. nm. Thus, the Limit of Detection achievable in these types of BICELLs is in the order of 64. pg/mL for 700. nm in pitch among nano-pillars in comparison with 292. pg/mL for 800. nm in pitch when are interrogated by Fourier Transform Visible and Infrared Spectrometry. The experiments exhibited a good reproducibility with a relative standard deviation of 0.29% measured within 8 days for a specific concentration. Finally, BICELLs functionality was tested in real conditions with unpurified rabbit serum for detecting anti-gestrinone antibodies, demonstrating the high performance of this type of BICELLs to detect specific antibodies having immobilized the suitable bioreceptors onto the sensing surface. © 2011 Elsevier B.V., This work is done within the support of the Spanish Ministry of Science and Innovation under project BIOPSIA (REF: TEC2008-06574). The authors thanks the Comunidad de Madrid and Universidad Politecncia de Madrid (Project BIO-VERSATIL, Ref CCG10-UPM/SEM-5096), Generalitat Valenciana (project ACOMP/2010/009 and PROMETEO 2010/008) and Dr Eva Brun for providing the rabbit serum containing polyclonal antibodies for gestrinone studies. F.J.O. is grateful to the Generalitat Valenciana for the postdoctoral grant included in the VALi + d 2010 Programme for Postdoctoral Researchers.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Downsize Effect on Photocatalytic Syngas Production of a 2D Metal Organic Framework-Tuning the Selectivity From HER to CO2RR via Dimensional Modulation and Mechanical Exfoliation of 2D Metal-Organic Layers

  • Saha, Rajat
  • Molina-Muriel, Manuel
  • Deniz, Fernando
  • Changarath, Mahesh Eledath
  • Ribera, Antonio
  • Benmansour, Samia
  • Sanchez-Royo, Juan F.
  • Canet-Ferrer, Josep
  • Ray, Debmalya
  • Garcia, Carlos J. Gomez
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Tuning the selectivity from hydrogen evolution reaction (HER) to CO2 reduction reaction (CO2RR) is a challenge in heterogeneous photocatalytic CO2 reduction by water as the proton source. The chemical inertness of CO2 and multiple proton-coupled electron transfer for CO2RR favor HER over CO2RR. To favor CO2RR, here we show the effect of downsizing the 2D Co-containing metal-organic framework (MOF) [Co(pdc)(H2O)(2)]& centerdot;H2O (2D) (pdc(2-) = 2,5-pyridinedicarboxylate) on its photocatalytic CO2RR performance. MOF 2D has been downsized in two ways: covalent bond breaking, leading to the 1D MOF [Co(pdc)(H2O)(2)]& centerdot;4H(2)O (1D), and supramolecular bond breaking of the metal-organic layers (MOLs) by liquid phase exfoliation (2D-ex). Structural analysis reveals that the Co-II centers have an octahedral geometry in 2D and a square pyramidal geometry in 1D, resulting in open metal sites. X-ray photoelectron spectroscopy (XPS) indicates that acetonitrile molecules are attached to the metal centers in 2D-ex, replacing some coordinated water molecules. Photocatalytic activity shows that these materials produce syngas with a tunable range of CO:H-2 ratio depending on the structure. Thus, 2D produces a higher proportion of H-2, whereas 1D and 2D-ex show a CO-enriched syngas. Theoretical studies show the relationship between the photocatalytic activity of these MOF and adsorption energies of CO2., This study forms part of the Advanced Materials program and was supported by the Spanish MCIN with funding from European Union NextGeneration EU (PRTR- C17.I1) and the Generalitat Valenciana (projects CIPROM/2022/060, CIPROM/2024/04, CIPROM/2024/071 MFA-2022-057, MFA-2022-017, MFA-2022-009, and MFA-2022-031). We also thank the Grants PID2023-146181OB-I00, PID2024-160147NB-I00, PID2024-161014NB-I00 funded by MCIN/AEI/ 10.13039/501100011033, CEX-2021-001230-S and Maria de Maeztu CEX2021-001202-M, funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" M. E. C. acknowledges financial support from the Santiago Grisolia Program of the Generalitat Valencia (grant CIGRIS/2021/150). D.R. acknowledges start-up fund provided by Monmouth University. The computational research used resources of the National Energy Research Scientific Computing Center; a DOE Office of Science User Facility supported by the office of Science of the U.S. Department of Energy under the Contract No. DE-AC02-05CH11231 using NERSC award BES-ERCAP0033005. M.M. acknowledges the funding received through the European Union's Next GenerationEU funds, articulated at the national level by the Recovery, Transformation and Resilience Plan.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Automated Monitoring of Bluefin Tuna Growth in Cages Using a Cohort-Based Approach

  • Muñoz-Benavent, Pau|||0000-0003-4681-183X
  • Andreu García, Gabriela|||0000-0001-5448-6171
  • Martínez-Peiró, Joaquín|||0000-0002-4430-9355
  • Puig Pons, Vicente|||0000-0002-8154-8259
  • Atienza-Vanacloig, Vicente|||0000-0001-9017-8707
  • Pérez Arjona, Isabel|||0000-0001-9010-6287
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
  • Morillo-Faro, Andrés
  • Ordoñez-Cebrian, Patricia
  • Alemany, Francisco
[EN] In this article, the evolution of BFT (bluefin tuna) sizes in fattening cages is studied, for which it was necessary to perform exhaustive monitoring with stereoscopic cameras and an exhaustive analysis of the data using automatic procedures. Exploring the size evolution of BFT over a long period is an important step in inferring their growth patterns, which are essential for designing smart aquaculture and sustainable fishing, and even assessing their health status. An important objective of this work was to verify whether tuna in captivity, in addition to fattening, grow in length. To this end, our autonomous monitoring system, equipped with stereoscopic cameras, was installed from 28 July 2020 to 23 May 2021 in a fattening cage in the Mediterranean containing 724 free-swimming tuna. This system provides thousands of images that, grouped by time intervals, allow us to conduct our studies. An automatic procedure, already introduced in a previous work and capable of processing large volumes of data, is used to estimate the length and width of individuals in ventral stereoscopic images of fish, and the evolution over time is analysed for each biometric characteristic. However, verifying the evolution of length and width based only on means or medians of these measurements may be inconsistent and insufficiently accurate to support our study objectives, as individuals of different sizes and ages may grow at different rates. Therefore, a modal analysis (Bhattacharya's method) was undertaken to identify the cohorts within the population. The results showed that each modal length surpassed the length of the next cohort and that there was accelerated growth in cages compared to the wild. In addition, we proved that using a length-width-weight relationship to estimate fish weight gives more accurate results than traditional length-weight relationships for fish fattened in cages., This study forms part of the ThinkInAzul programme and was supported by the MCINwith funding from the European Union's NextGenerationEU (PRTR-C17.I1) and the Generalitat Valenciana (THINKINAZUL/2021/007, THINKINAZUL/2021/009, and AICO/2021/016). This work was carried out under the ICCAT Atlantic-Wide Research Programme for Bluefin Tuna (ICCATGBYP 10/2020), which is funded by the European Union, several ICCAT CPCs, the ICCAT Secretariat, and other entities (see https://www.iccat.int/gbyp/en/overview.asp, accessed on 22 January 2024).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Chromatic dispersion compensation and coherent Direct-Sequence OCDMA operation on a single super structured FBG

  • Baños López, Rocío
  • Amaya Ocampo, Waldimar Alexander
  • García Muñoz, Víctor
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
We have proposed, fabricated and demonstrated experimentally a set of Coherent Direct Sequence-OCDMA en/decoders based on Super Structured Fiber Bragg Gratings (SSFBGs) which are able to compensate the fiber chromatic dispersion at the same time that they perform the en/decoding task. The proposed devices avoid the use of additional dispersion compensation stages reducing system complexity and losses. This performance was evaluated for 5.4, 11.4 and 16.8 km of SSMF. The twofold performance was verified in Low Reflectivity regime employing only one GVD compensating device at decoder or sharing out the function between encoder and decoder devices. Shared functionality requires shorter SSFBGs designs and also provides added flexibility to the optical network design. Moreover, dispersion compensated en/decoders were also designed into the High Reflectivity regime employing synthesis methods achieving more than 9 dB reduction of insertion loss for each device. © 2012 Optical Society of America., This work was supported by the Spanish Government project TEC 2009-12169, and the Valencian Government under the projects ACOMP/2012/023 and FPA/2012/009.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

La cultura del vino en España y su aplicación en el turismo: referencia a la legislación aplicable

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[EN] The culture of wine is associated with our territory and gastronomy. A type of tourism has been promoted, the oenological one, which represents a booming sector, and which is motivated by various factors: territorial, enjoyment and consumption by tourism. We propose an analysis of this phenomenon and the study of a peculiar case, the so-called L'Escaldà and its tourist interest after being declared as an asset of intangible cultural interest in the Valencian Community, in relation to the muscatel wine
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Solving fully randomized first-order linear control systems: Application to study the dynamics of a damped oscillator with parametric noise under stochastic control

  • Cortés, J.-C.|||0000-0002-6528-2155
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
  • Navarro-Quiles, A.
[EN] This paper is devoted to study random linear control systems where the initial condition, the final target, and the elements of matrices defining the coefficients are random variables, while the control is a stochastic process. The so-called Random Variable Transformation technique is adapted to obtain closed-form expressions of the probability density functions of the solution and of the control. The theoretical findings are applied to study the dynamics of a damped oscillator subject to parametric noise., This work has been supported by the Spanish Ministerio de Economia, Industria y Competitividad (MINECO), the Agencia Estatal de Investigacion, Spain (AEI) and Fondo Europeo de Desarrollo Regional (FEDER UE) grant MTM2017-89664-P. Computations have been carried thanks to the collaboration of Raul San Julian Garces and Elena Lopez Navarro granted by European Union through the Operational Program of the European Regional Development Fund (ERDF)/European Social Fund (ESF) of the Valencian Community 2014-2020, grants GJIDI/2018/A/009 and GJIDI/2018/A/010, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Turismo e inteligencia artificial: nuevas perspectivas para los productos turísticos

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[EN] We propose in this paper to analyze the application of artificial intelligence in the field of tourism. From the perspective of new information and communication technologies (ICTs), the design of tourism products, as well as the attraction of tourists, is influenced by artificial intelligence. Applications such as DALL-E allow the configuration of unrealistic scenarios that can be used as a claim, but this also entails if it is not a deception to the consumer. We are going to reflect on this and provide some interesting solutions., [ES] Nos proponemos en el presente trabajo analizar la aplicación de la inteligencia artificial en el ámbito del turismo. Desde la perspectiva de las nuevas tecnologías de la información y comunicación (TICs) el diseño de productos turísticos, así como la atracción del turista se ve influido por la inteligencia artificial. Aplicaciones como DALL-E permiten configurar escenarios irreales que se pueden utilizar como reclamo, pero ello también conlleva si no es un engaño al consumidor. Sobre ello, vamos a reflexionar y a aportar algunas soluciones de interés.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High-Pressure X-ray Diffraction Study of Orthorhombic Ca2Zr5Ti2O16

  • García-Sánchez, Tania María|||0000-0001-5762-5325
  • Diaz-Anichtchenko, Daniel
  • Muñoz, Alfonso
  • Rodriguez-Hernandez, Placida
  • Marqueño, Tomás
  • Jafar, Mohsin
  • Achary, S. Nagabhusan
  • Alabarse, Frederico
  • Errandonea, Daniel
[EN] The orthorhombic polymorph of Ca2Zr5Ti2O16 (space group Pbca) has been studied by powder X-ray diffraction under high pressures up to 30 GPa using synchrotron radiation. We have found evidence of a structural phase transition at 12¿13 GPa. The phase transition causes an enhancement of the crystal symmetry. The high-pressure phase is tetragonal, being described by space group I41/acd. The space groups of the high- and low-pressure phases have a group/subgroup relationship. However, the phase transition is accompanied by a discontinuous change in the unit-cell volume, indicating that the phase transition can be classified as first order. We have also performed density functional theory calculations. These simulations support the occurrence of the orthorhombic-to-tetragonal transition. The pressure¿volume equation of state and axial compressibilities have been determined for both polymorphs. The results are compared with previous studies in related oxides., The authors are grateful for financial support from the Spanish Research Agency (AEI) and Spanish Ministry of Science and Investigation (MCIN) under Grants PID2019-106383GB-41/ 43 (http://dx.doi.org/10.13039/501100011033) and RED2018-102612-T (MALTA Consolider Team Network) and from Generalitat Valenciana under Grants PROMETEO CIPROM/2021/075-GREENMAT and MFA/2022/007. This study forms part of the Advanced Materials program and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. D.D.-A. acknowledges the Ph.D. fellowship granted by Generalitat Valencia (ACIF/2020/009). T.G.-S. thanks Universitat Politecnica de Valencia for the support through the program Ayudas para la recualificacion del profesroado universitario . We thank Elettra synchrotron for providing beamtime at Xpress beamline (Proposal No. 20220611).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of microwave sintering on microstructure and mechanical properties in Y-TZP materials used for dental applications

  • Presenda, Álvaro
  • Moreno, Rodrigo
  • Salvador Moya, Mª Dolores|||0000-0002-4242-478X
  • Penaranda-Foix, Felipe L.|||0000-0003-4012-0763
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
The aim of this work is to study the application of microwave sintering to consolidate yttria-stabilized zirconia polycrystalline (Y-TZP) ceramics commonly applied in dentistry, so as to obtain highly dense materials and fine microstructure with shorter sintering cycles. Three Y-TZP materials are considered: two commercially available for dental applications and one laboratory studied powder. Microwave sintering was carried out at 1200 and 1300 degrees C for 10 min and conventional sintering at 1300 and 1400 degrees C for 2 h. Relative density, Vickers hardness and fracture toughness values for sintered samples were determined. Microwave sintering results, generally, in improved mechanical properties of the materials in terms of hardness and fracture toughness compared to conventional sintering and, in some cases, at lower sintering temperatures. A finer grain microstructure (final grain size < 250 min) was obtained with microwave sintering for both commercial materials. Fracture toughness values differ significantly between sintering techniques and chosen parameters. These results suggest that microwave heating can be employed to sinter Y-TZP commercial ceramics for dental applications obtaining improving the mechanical properties of the materials with a very important time and energy consumption reduction. Crown Copyright (C) 2015 Published by Elsevier Ltd and Techna Group S.r.l. All rights reserved., The authors would like to thank the financial support received from Universidad Politecnica de Valencia under Project 5P20120677 and Ministerio de Economia y Competitividad (MINECO) and co-funded by ERDF (European Regional Development Funds) through the Project (IEC2012-37532-C02-01). A. Borrell acknowledges the Spanish Ministry of Science and Innovation for her Juan de la Cierva Contract (JCI-2011-10498) and the Generalitat Valenciana for the financial support under Project GV/2014/009. A. Presenda acknowledges the Generalitat Valenciana for his Santiago Grisolia program scholarship (GRISOLLV2013/035). The authors would also like to acknowledge Prof. Dr. M. F. Sold from the Faculty of Medicine and Odontology at the Universidad de Valencia for supplying the commercial materials.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact of a Gender-Neutral HPV Vaccination Program in Men Who Have Sex with Men (MSM)

  • Diez-Domingo, Javier
  • Sánchez-Alonso, Víctor
  • Acedo, Luis
  • Tuells, José
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
[EN] A major challenge in human papillomavirus (HPV) vaccine programs is the universal gender-neutral recommendation, as well as estimation of its long-term effect. The objective of this study is to predict the added benefit of male vaccination, especially in men who have sex with men (MSM), and to analyze the impact of the program on society. We propose a mathematical model of the HPV infection based on a network paradigm. Data from Spain allowed constructing the sexual network. HPV force of infection was taken from literature. Different scenarios using variable vaccine coverage in both males and females were studied. Strong herd immunity is shown in the heterosexual population, with an important decrease of HPV 6/11 infections both in men and in unvaccinated women with an only-women vaccination at 14 years of age. No impact of this program occurred in the infection incidence in MSM. This group would only benefit from a vaccination program that includes males. However, the impact at short term would be lower than in heterosexual men. The protection of MSM can only be achieved by direct vaccination of males. This may have important consequences for public health., This paper has been supported by the Spanish Ministerio de Economía, Industria y Competitividad (MINECO), the Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER UE) grant MTM2017-89664-P. This paper has been supported by the European Union through the Operational Program of the [European Regional Development Fund (ERDF)/European Social Fund (ESF)] of the Valencian Community 2014¿2020. Files: GJIDI/2018/A/010 and GJIDI/2018/A/009
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Mean square convergent numerical solutions of random fractional differential equations: Approximations of moments and density

  • Burgos-Simon, Clara|||0000-0001-6385-4263
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
  • Villafuerte, L.
[EN] A fractional forward Euler-like method is developed to solve initial value problems with uncertainties formulated via the Caputo fractional derivative. The analysis is conducted by using the so-called random mean square calculus. Under mild conditions on the data, the mean square convergence of the numerical method is proved. This type of stochastic convergence guarantees the approximations of the mean and the variance of the solution stochastic process, computed via the aforementioned numerical scheme, will converge to their corresponding exact values. Furthermore, from this probability information, we calculate reliable approximations to the first probability density function of the solution by taking advantage of the Maximum Entropy Principle. The theoretical analysis is illustrated by two examples., This work has been partially supported by the Ministerio de Economia y Competitividad grant MTM2017-89664-P and by the European Union through the Operational Program of the European Regional Development Fund (ERDF)/European Social Fund (ESF) of the Valencian Community 20142020, grants GJIDI/2018/A/009 and GJIDI/2018/A/010.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Epidemiological modelling of COVID-19 in Granada, Spain: Analysis of future scenarios

  • Garrido, José-Manuel
  • Rodríguez-Serrano, Fernando
  • Martínez-Rodríguez, David|||0000-0002-2093-7840
  • San Julián-Garcés, Raúl|||0000-0003-3052-3200
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
The Spanish Ministerio de Economia, Industria y Competitividad (MINECO), the Agencia Estatal de Investigacion (AEI) and Fondo Europeo de Desarrollo Regional (FEDER UE) grant MTM2017-89664-P; the European Union through the Operational Program of the [European Regional Development Fund (ERDF) / European Social Fund (ESF)] of the Valencian Community 2014-2020. Files: GJIDI/2018/A/010 and GJIDI/2018/A/009; the Ramon Areces Foundation, Madrid, Spain (CIVP18A3920).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Vivienda sostenible, inteligencia artificial y huertos urbanos: algunas reflexiones y propuestas, Sustainable housing, artificial intelligence, and urban gardens: some reflections and proposals

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[EN] Sustainable housing represents a suitable model for achieving resource savings and energy efficiency in the fight against climate change. LEED and «Passivhaus» certification determine that housing meets the necessary standards for sustainability. Specific regulations for sustainable housing are lacking, as recent housing regulations such as Law 9/2022 and Law 12/2023 establish basic quality requirements for buildings and their facilities. Artificial intelligence can be an ideal tool for achieving housing sustainability through the design of algorithms that allow the visualization of the final result of the construction technique, as well as the development of the project itself, allowing any anomalies to be rectified on the spot. It is worth highlighting the relationship between sustainable housing and urban gardens as a citizen participation activity to achieve self¿consumption and enhance the environmental protection of spaces., Trabajo realizado en el marco del Grupo de Investigación de Excelencia Generalitat Valenciana «Algorithmical Law» (Proyecto Prometeu 2021/009, 2021&#8208;2024), Proyecto «Promoting capacity building and knowledge for the extension of urban gardens in European cities» (PCI2022&#8208;132963) (02/06/22&#8208;01/06/25), y Proyecto de I+D+i «Derechos y garantías públicas frente a las decisiones automatizadas y el sesgo y discriminación algorítmicas» 2023&#8208;2025 (PID2022&#8208;136439OB&#8208;I00) financiado por MCIN/AEI/10.13039/501100011033/ FEDER, UE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

El robot como producto defectuoso y responsabilidad civil, The robot as a defective product and civil liability

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[EN] In this study, we reflect on extracontractual civil liability for damages caused by a robot. From the electronic personality that was indicated in the Resolution of the European Parliament, of February 16, 2017, to the recent Proposals for Regulations and Directives on civil liability in the field of artificial intelligence and for defective products, there are numerous questions that arise around how to articulate the responsibility in which artificial intelligence intervenes. The dilemma between objective or subjective liability or due to fault is a matter of discussion, and the legislative proposals are inclined towards subjective liability, taking into account the difficulties of proof. We will delve into these aspects, focusing on the robot as a defective product and the interference of the responsibility derived from a product in which human intervention is contemplated. With this, we will obtain some conclusions for the understanding of the future legislation., [ES] En el presente estudio se reflexiona sobre la responsabilidad civil extracontractual por daños causados por un robot. De la personalidad electrónica que se indicaba en la Resolución del Parlamento Europeo, de 16 de febrero de 2017 hasta las recientes Propuestas de Reglamento y Directivas sobre responsabilidad civil en materia de inteligencia artificial y por productos defectuosos son numerosas las cuestiones que se suscitan en torno a cómo articular la responsabilidad en la que interviene la inteligencia artificial. El dilema entre responsabilidad objetiva o subjetiva o por culpa es motivo de discusión, y las propuestas legislativas se inclinan por la responsabilidad subjetiva teniendo en cuenta las dificultades de prueba. Ahondaremos en estos aspectos, centrándonos en el robot como un producto defectuoso y la injerencia de la responsabilidad derivada de un producto en el que se contempla la intervención humana. Con ello, obtendremos unas conclusiones para la comprensión de la futura legislación, Trabajo realizado en el marco del Proyecto I+D+i «Retos investigación» del Programa estatal de I+D+i orientado a los Retos de la Sociedad del Ministerio de Ciencia, Innovación y Universidades: RTI2018- 097354-B-100. «Contratos, transparencia y protección de datos en el mercado digital» (2019-2022). Investigadores Principales: Dr. Javier Plaza Penadés, Catedrático de Derecho Civil, y Dra. Luz M. Martínez Velencoso, Catedrática de Derecho Civil. Universitat de València¿Estudi General, y Proyecto de I+D+i Retos MICINN «Derechos y garantías frente a las decisiones automatizadas en entornos de inteligencia artificial, IoT, big data y robótica» (PID2019-108710RB-I00, 2020-2022). Investigador principal: Dr. D. Lorenzo Cotino Hueso. Catedrático de Derecho Constitucional. Universitat de València. Proyecto I+D+i «Retos de Investigación» del Programa Estatal de I+D+i orientada a los retos de la sociedad, y Grupo de Investigación de Excelencia Generalitat Valenciana «Algorithmical Law» (Proyecto Prometeu 2021/009, 2021-2024). Investigador Principal: Dr. D. Andrés Boix Palop, Profesor titular de Derecho Administrativo. Universitat de València-Estudi General.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Growth selectivity control of InAs shells on crystal phase engineered GaAs nanowires

  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
  • Marnauza, Mikelis
  • Dick, Kimberly A.
  • Lehmann, Sebastian
[EN] In this work we demonstrate a two-fold selectivity control of InAs shells grown on crystal phase and morphology engineered GaAs nanowire (NW) core templates. This selectivity occurs driven by differences in surface energies of the NW core facets. The occurrence of the different facets itself is controlled by either forming different crystal phases or additional tuning of the core NW morphology. First, in order to study the crystal phase selectivity, GaAs NW cores with an engineered crystal phase in the axial direction were employed. A crystal phase selective growth of InAs on GaAs was found for high growth rates and short growth times. Secondly, the facet-dependant selectivity of InAs growth was studied on crystal phase controlled GaAs cores which were additionally morphology-tuned by homoepitaxial overgrowth. Following this route, the original hexagonal cores with {110} sidewalls were converted into triangular truncated NWs with ridges and predominantly {112}(B) facets. By precisely tuning the growth parameters, the growth of InAs is promoted over the ridges and reduced over the {112}(B) facets with indications of also preserving the crystal phase selectivity. In all cases (different crystal phase and facet termination), selectivity is lost for extended growth times, thus, limiting the total thickness of the shell grown under selective conditions. To overcome this issue we propose a 2-step growth approach, combining a high growth rate step followed by a low growth rate step. The control over the thickness of the InAs shells while maintaining the selectivity is demonstrated by means of a detailed transmission electron microscopy analysis. This proposed 2-step growth approach enables new functionalities in 1-D structures formed by using bottom-up techniques, with a high degree of control over shell thickness and deposition selectivity., The authors acknowledge.nancial support from the Knut and Allice Wallenberg Foundation (Project: 800313-1540). VJG acknowledges.nancial support from the Generalitat Valenciana (Project: CDEIGENT/2020/009).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improving the User Experience of the rCUDA Remote GPU Virtualization Framework

  • Reaño González, Carlos
  • Peña Monferrer, Antonio José
  • Mayo Gual, Rafael
  • Duato Marín, José Francisco
  • Silla, Federico|||0000-0002-6435-1200
  • Castelló, Adrián|||0000-0002-8576-8451
  • Quintana-Ortí, Enrique S.|||0000-0002-5454-165X
Graphics processing units (GPUs) are being increasingly embraced by the high-performance computing community as an effective way to reduce execution time by accelerating parts of their applications. remote CUDA (rCUDA) was recently introduced as a software solution to address the high acquisition costs and energy consumption of GPUs that constrain further adoption of this technology. Specifically, rCUDA is a middleware that allows a reduced number of GPUs to be transparently shared among the nodes in a cluster. Although the initial prototype versions of rCUDA demonstrated its functionality, they also revealed concerns with respect to usability, performance, and support for new CUDA features. In response, in this paper, we present a new rCUDA version that (1) improves usability by including a new component that allows an automatic transformation of any CUDA source code so that it conforms to the needs of the rCUDA framework, (2) consistently features low overhead when using remote GPUs thanks to an improved new communication architecture, and (3) supports multithreaded applications and CUDA libraries. As a result, for any CUDA-compatible program, rCUDA now allows the use of remote GPUs within a cluster with low overhead, so that a single application running in one node can use all GPUs available across the cluster, thereby extending the single-node capability of CUDA. Copyright © 2014 John Wiley & Sons, Ltd., This work was funded by the Generalitat Valenciana under Grant PROMETEOII/2013/009 of the PROMETEO program phase II. The author from Argonne National Laboratory was supported by the US Department of Energy, Office of Science, under Contract No. DE-AC02-06CH11357. The authors are also grateful for the generous support provided by Mellanox Technologies.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A delayed nonlinear stochastic model for cocaine consumption: Stability analysis and simulation using real data

  • Burgos-Simon, Clara|||0000-0001-6385-4263
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
  • Shaikhet, L.
[EN] In this paper we propose a stochastic mathematical model with distributed delay in order to describe the transmission dynamics of cocaine consumption in Spain. We investigate conditions to guarantee the stability in probability of the equilibrium points under stochastic perturbations via the white noise processes. The results are applied to the model cocaine consumption using data retrieved from the Spanish Drug National Plan, http://www.pnsd.mscbs.gob.es/. The obtained results may be useful for policy health authorities in order to improve the strategies against the drug consumption in the long-run., This work has been supported by the Spanish Ministerio de Economia, Industria y Competitividad (MINECO), the Agencia Estatal de Investigacion (AEI) and Fondo Europeo de Desarrollo Regional (FEDER UE) grant MTM2017-89664-P. Computations have been carried thanks to the collaboration of Raul San Julian Garces and Elena Lopez Navarro granted by European Union through the Operational Program of the European Regional Development Fund (ERDF)/European Social Fund (ESF) of the Valencian Community 2014-2020, grants GJIDI/2018/A/009 and GJIDI/2018/A/010, respectively
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of Deposition Cycles on the Properties of ZnO Thin Films Deposited by Spin Coating Method for CZTS-based Solar Cells

  • Aamir Shafi, Muhammad
  • Fradi, Khawla
  • Marí-Guaita, Julia
  • Khan, Laiq
  • Bouich, Amal|||0000-0001-6745-8831
  • Marí, B.|||0000-0003-0001-419X
[EN] The spin-coating technique was used to make ZnO thin films in this study. To get various thicknesses of ZnO thin film on FTO substrate, the numbers of spin coatings were changed, 2,4,6,8, and 10 times. The polycrystalline character of the ZnO film can be seen in all of the XRD samples. The more strong peaks exist on (100), (002) and (101) at two theta degrees 34.14, 34.84 and 36.68, respectively. The effect of different deposition cycles was evaluated based on the surface homogeneity. The ZnO deposited by 8 and 10 cycles showed a dense and smooth surface with good crystallinity and roughness with no holes. The estimated band gap for as-deposited ZnO films is 1.73-2.35 eV with increasing deposition cycles. As we annealed the samples at 450 degrees C for 45 min, the variation in the band was observed from 3.24 to 3.29 eV. Hence the annealing also played an essential role in the band gap variation. To check the effect of cycles on solar cell performance, a simulation software SCAPS-1D was used. We proposed a solar cell of model "Back. Contact/CZTS/CdS/ZnO/Front.Contact/Glass" used in the simulation., Author Amal Bouich acknowledged the post-doctoral contract supported by the RRHH, the Postdoctoral contract the Margarita Salas financed with union European Next Generation EU. This research has been funded by Grant PID2019-107137RB-C22 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". Author Muhammad Aamir Shafi acknowledged the "Higher Education Commission of Pakistan", International Research Support Initiative Program (IRSIP) under grant No: 1-8/HEC/HRD/2020/10744 PIN: IRSIP 45 Engg 17.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A deep deterministic policy gradient approach for optimizing feeding rates and water quality management in recirculating aquaculture systems

  • Elmessery, Wael M.
  • Abdallah, Said Elshahat
  • Oraiath, Awad Ali Tayoush
  • Abuhussein, Mohamed Fawzi Abdalshefie
  • Szucs, Peter
  • Eid, Mohamed Hamdy
  • El-Shinawy, Doaa M.
  • Aljumayi, Huda
  • Mahmoud, Samy F.
  • Elwakeel, Abdallah Elshawadfy
  • Espinosa Roselló, Víctor|||0000-0001-8882-866X
[EN] Optimizing feeding rates in recirculating aquaculture systems (RAS) is crucial for ensuring fish growth, health, and system efficiency. This research introduces a novel approach to RAS feeding control using a Deep Deterministic Policy Gradient (DDPG) reinforcement learning algorithm. The developed system integrates feeding rate optimization with comprehensive water quality management to improve overall performance and stability. The DDPG controller demonstrated superior tracking accuracy, reduced feed consumption, and improved operational stability compared to traditional control methods such as Model Predictive Control (MPC), PID, and Bang-Bang control. The learned policy-maintained feeding rates within optimal ranges while adapting to dynamic system requirements and environmental conditions. The integration of water quality monitoring and control further enhanced system stability, ensuring critical parameters remained within target ranges. Comparative analysis revealed the DDPG controller's advantages in terms of faster recovery times after environmental perturbations, improved long-term stability, and significant economic benefits through reduced operational costs and increased efficiency. The robustness and adaptability of the system were validated through comprehensive testing under various fault conditions, growth phases, and system scales. The successful development and evaluation of the DDPG-based RAS feeding control system represents a significant advancement in aquaculture management. The demonstrated improvements in efficiency, stability, and economic performance establish the potential for this approach to revolutionize feeding practices in commercial RAS operations. Further research and development efforts can build upon these findings to advance the state-of-the-art in intelligent aquaculture management systems and promote the sustainability and profitability of the industry., The authors extend their appreciation to Taif University, Saudi Arabia, for supporting this work through project number (TU-DSPP-2024-174).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Photoelectrochemical characterization of anatase-rutile mixed TiO2 nanosponges

  • Fernández Domene, Ramón Manuel
  • Sánchez Tovar, Rita
  • Sanchez-Gonzalez, S.
  • Garcia-Anton, Jose|||0000-0002-0289-1324
This work studies the influence of using hydrodynamic conditions during anodization on the morphology and electrochemical properties of anatase/rutile mixed TiO2 nanotubes (Reynolds number, Re = 0) and nanosponges (Re > 0). To this purpose different techniques were used, such as: microscopy techniques (Field-Emission Scanning Electron Microscope, FE-SEM, and Confocal Laser-Raman Spectroscopy), Electrochemical Impedance Spectroscopy (EIS), Mott Schottky (MS) analysis and photoelectrochemical water splitting tests. This investigation demonstrates that the morphology of TiO2 nanostructures may be greatly affected due to the hydrodynamic conditions and it can be adjusted in order to increase the efficiency for energy and environmental applications. (C) 2016 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved., Authors would like to express their gratitude for their financial support to the Generalitat Valenciana (PROMETEOII/2014/009).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Novel and conventional embryo parameters as input data for artificial neural networks: an artificial intelligence model applied for prediction of the implantation potential

  • Bori, Lorena
  • Paya-Bosch, Elena
  • Alegre, Lucía
  • Viloria, Thamara
  • Remohí, José
  • Meseguer, Marcos
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
[ES] Objetivo: Describir nuevas características de embriones capaces de predecir el potencial de implantación como datos de entrada para un modelo de red neuronal artificial (ANN). Diseño: Estudio de cohorte retrospectivo. Entorno: Centro de FIV privado afiliado a la universidad. Paciente (s): Este estudio incluyó a 637 pacientes del programa de donación de ovocitos que se sometieron a transferencia de un solo blastocisto durante dos años consecutivos. Intervención (es): Ninguna. Principales medidas de resultado: La investigación se dividió en dos fases. La fase 1 consistió en la descripción y análisis de las siguientes características embrionarias en embriones implantados y no implantados: distancia y velocidad de migración pronuclear, diámetro del blastocisto expandido, área de masa celular interna y duración del ciclo celular del trofoectodermo. La fase 2 consistió en el desarrollo de un algoritmo ANN para la predicción de la implantación. Se obtuvieron resultados para cuatro modelos alimentados con diferentes datos de entrada. El poder predictivo se midió con el uso del área bajo la curva característica operativa del receptor (AUC). Resultado (s): De los cinco nuevos parámetros descritos, el diámetro expandido del blastocisto y la duración del ciclo celular del trofoectodermo tenían valores estadísticamente diferentes en los embriones implantados y no implantados. Después de que los modelos ANN fueron entrenados y validados mediante validación cruzada cinco veces, estos fueron capaces de predecir la implantación en los datos de prueba con AUC de 0,64 para ANN1 (morfocinética convencional), 0,73 para ANN2 (morfodinámica novedosa), 0,77 para ANN3 (morfocinética convencional þ morfodinámica novedosa) y 0,68 para ANN4 (variables discriminatorias de prueba estadística). Conclusión (es): Las nuevas características embrionarias propuestas afectan al potencial de implantación y su combinación con parámetros morfocinéticos convencionales es eficaz como datos de entrada para un modelo predictivo basado en inteligencia artificial., [EN] Objective: To describe novel embryo features capable of predicting implantation potential as input data for an artificial neural network (ANN) model. Design: Retrospective cohort study. Setting: University-affiliated private IVF center. Patient(s): This study included 637 patients from the oocyte donation program who underwent single-blastocyst transfer during two consecutive years. Intervention(s): None. Main Outcome Measure(s): The research was divided into two phases. Phase 1 consisted of the description and analysis of the following embryo features in implanted and nonimplanted embryos: distance and speed of pronuclear migration, blastocyst expanded diameter, inner cell mass area, and trophectoderm cell cycle length. Phase 2 consisted of the development of an ANN algorithm for implantation prediction. Results were obtained for four models fed with different input data. The predictive power was measured with the use of the area under the receiver operating characteristic curve (AUC). Result(s): Out of the five novel described parameters, blastocyst expanded diameter and trophectoderm cell cycle length had statistically different values in implanted and nonimplanted embryos. After the ANN models were trained and validated using fivefold cross validation, they were capable of predicting implantation on testing data with AUCs of 0.64 for ANN1 (conventional morphokinetics), 0.73 for ANN2 (novel morphodynamics), 0.77 for ANN3 (conventional morphokinetics thorn novel morphodynamics), and 0.68 for ANN4 (discriminatory variables from statistical test). Conclusion(s): The novel proposed embryo features affect the implantation potential, and their combination with conventional morphokinetic parameters is effective as input data for a predictive model based on artificial intelligence. ((c) 2020 by American Society for Reproductive Medicine.), Supported by the Ministry of Science, Innovation, and Universities CDTI (IDI-20191102), an Industrial Ph.D. grant (DIN2018-009911), and Agencia Valenciana de Innovacio (INNCAD00-18-009) to E.P. and M.M.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Frequency Response of MAPbI3 Perovskites for Photodetection Application

  • Soriano-Díaz, Sandra
  • Solis, Omar E.
  • Ramírez-Muñoz, Diego
  • Martínez-Pastor, Juan P.
  • Suárez, Isaac
  • Boix, Pablo P.|||0000-0001-9518-7549
[EN] The frequency response of the photocurrent (I-ph) generated in perovskite photodetectors is a crucial issue in imaging or telecommunication applications, although it is briefly discussed in the literature. The present work obtains for the first time the complete expression of the I-ph generated on MAPbI(3) (MA:methylamoniumI) perovskite polycrystalline thin films. A conditioning circuit is used to extract I-ph at 1 V of bias voltage under a square-modulated laser excitation with a sensitivity smaller than 1 nW and a linear dynamic range LDR > 200 dB; It allows an accurate determination of the module of I-ph together with the phase, which is not usually reported in photodetector systems. The frequency domain analysis reveals that I-ph can be modeled by two fractional poles located at low (10 kHz) and high (39-250 kHz) cut-off frequencies. Optimum geometrical parameters and excitation fluence are found for the wider response, resulting for the best device on a cut off frequency up to 250 kHz, and the reproduction of square-modulated optical waves up to 100 kHz. These results represent an important strategy toward the electrical analysis of MAPbI(3) (or other perovskite materials) for the design of posterior electronic stages, optimization of devices and determination of their figures of merit., This project received funding from the Spanish MINECO through projects no. PID2020-120484RB-I00 and PID2019-107314RB-I00 (Stable). This study also forms part of the Advanced Materials (project no. MFA/2022/066) and Quantum Communication (projects no. COMCUANTICA/009) programmes and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.I1) and by Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the Benefits of the Remote GPU Virtualization Mechanism: the rCUDA Case

  • Silla, Federico|||0000-0002-6435-1200
  • Prades, Javier|||0000-0003-3349-2200
  • Iserte Agut, Sergio
  • Reaño González, Carlos
[EN] Graphics processing units (GPUs) are being adopted in many computing facilities given their extraordinary computing power, which makes it possible to accelerate many general purpose applications from different domains. However, GPUs also present several side effects, such as increased acquisition costs as well as larger space requirements. They also require more powerful energy supplies. Furthermore, GPUs still consume some amount of energy while idle, and their utilization is usually low for most workloads. In a similar way to virtual machines, the use of virtual GPUs may address the aforementioned concerns. In this regard, the remote GPU virtualization mechanism allows an application being executed in a node of the cluster to transparently use the GPUs installed at other nodes. Moreover, this technique allows to share the GPUs present in the computing facility among the applications being executed in the cluster. In this way, several applications being executed in different (or the same) cluster nodes can share 1 or more GPUs located in other nodes of the cluster. Sharing GPUs should increase overall GPU utilization, thus reducing the negative impact of the side effects mentioned before. Reducing the total amount of GPUs installed in the cluster may also be possible. In this paper, we explore some of the benefits that remote GPU virtualization brings to clusters. For instance, this mechanism allows an application to use all the GPUs present in the computing facility. Another benefit of this technique is that cluster throughput, measured as jobs completed per time unit, is noticeably increased when this technique is used. In this regard, cluster throughput can be doubled for some workloads. Furthermore, in addition to increase overall GPU utilization, total energy consumption can be reduced up to 40%. This may be key in the context of exascale computing facilities, which present an important energy constraint. Other benefits are related to the cloud computing domain, where a GPU can be easily shared among several virtual machines. Finally, GPU migration (and therefore server consolidation) is one more benefit of this novel technique., Generalitat Valenciana, Grant/Award Number: PROMETEOII/2013/009; MINECO and FEDER, Grant/Award Number: TIN2014-53495-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Derechos fundamentales durante la pandemia de la COVID-19, FUNDAMENTAL RIGHTS DURING THE COVID-19 PANDEMIC

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[ES] Se analiza el cumplimiento de los derechos fundamentales durante el periodo de pandemia en España, y la incidencia en la población respecto al derecho a la salud y los recursos sanitarios. También se atenderá a los pronunciamientos de la jurisprudencia sobre la oportunidad de la declaración del estado de alarma, así como las consecuencias en la población., [EN] It analyzes the fulfillment of fundamental rights during the period of the pandemic in Spain, and the impact on the population regarding the right to health and health resources. It will also take into account the pronouncements of case law on the appropriateness of the declaration of the state of alarm, as well as the consequences in the population, Trabajo realizado en el marco del Proyecto I+D+i «Retos investigación» del Programa estatal de I+D+i orientado a los Retos de la Sociedad del Ministerio de Ciencia, Innovación y Universidades RTI2018- 097354-B-100 (2019-2022), y Proyecto de I+D+i Retos MICINN (PID2019-108710RB-I00, 2020-2022), y Grupo de Investigación de Excelencia Generalitat Valenciana ¿Algorithmical Law¿ (Proyecto Prometeu 2021/009, 2021-2024).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

InfiniBand verbs optimizations for remote GPU virtualization

  • Reaño González, Carlos
  • Silla, Federico|||0000-0002-6435-1200
The use of InfiniBand networks to interconnect high performance computing clusters has considerably increased during the last years. So much so that the majority of the supercomputers included in the TOP500 list either use Ethernet or InfiniBand interconnects. Regarding the latter, due to the complexity of the InfiniBand programming API (i.e., InfiniBand Verbs) and the lack of documentation, there are not enough recent available studies explaining how to optimize applications to get the maximum performance from this fabric. In this paper we expose two different optimizations to be used when developing applications using InfiniBand Verbs, each providing an average bandwidth improvement of 3.68% and 217.14%, respectively. In addition, we show that when combining both optimizations, the average bandwidth gain is 43.29%. This bandwidth increment is key for remote GPU virtualization frameworks. Actually, this noticeable gain translates into a reduction of up to 35% in execution time of applications using remote GPU virtualization frameworks., This work was funded by the Generalitat Valenciana under Grant PROMETEOII/2013/009 of the PROMETEO program phase II. Authors are also grateful for the generous support provided by Mellanox Technologies
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Prácticas comerciales desleales en el ámbito de los contratos de productos agrarios

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
[EN] the need to avoid unfair commercial practices in the field of contracting agricultural and food products has been regulated in Law 16/2021, which modifies what is known as the ¿Chain Law¿. In this study we propose to analyze the measures contemplated in this legislative amendment to prevent the weakest contractual party from being harmed in the contractual relationships of agricultural products. It is a modification of great relevance for the proper functioning of the food chain, with very significant changes such as the formalization of contracts in writing, and the establishment of a digital record of the same and, ultimately, in the protection of the consumer, the last link in the chain., [ES] la necesidad de evitar prácticas comerciales desleales en el ámbito de la contratación de productos agrarios y alimentarios ha sido objeto de regulación en la Ley 16/2021, que modifica la conocida como ¿Ley de la Cadena¿. En este estudio nos proponemos analizar las medidas que se contemplan en esta modificación legislativa para evitar que la parte contractual más débil se vea perjudicada en las relaciones contractuales de los productos agrarios. Se trata de una modificación de gran relevancia para el buen funcionamiento de la cadena alimentaria, con cambios muy significativos como la formalización por escrito de los contratos, y el establecimiento de un registro digital de los mismos y, en última instancia, en la protección del consumidor, último eslabón de dicha cadena, Trabajo realizado en el marco del Proyecto I+D+i Retos investigación del Programa estatal de I+D+i orientado a los Retos de la Sociedad del Ministerio de Ciencia, Innovación y Universidades: RTI2018-097354-B-100 (2019-2022) y del Proyecto de I+D+i Retos de Investigación, MICINN, del Programa Estatal de I+D+i orientada a los retos de la sociedad (PID2019-108710RB-I00, 2020-2022) y Grupo de Investigación de Excelencia Generalitat Valenciana Algorithmical Law (Proyecto Prometeu 2021/009, 2021-2024).