Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 40
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Palladium Hydride on C2N to Boost Formate Oxidation

  • Wang, Xiang
  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Han, Xu|||0000-0001-8319-8830
  • Yu, Jing|||0000-0002-7620-745X
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Liang, Zhifu
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Li, Junshan|||0000-0002-1482-1972
The lack of electrocatalysts for the formate oxidation reaction (FOR) hampers the deployment of direct formate fuel cells (DFFCs). To overcome this limitation, herein, we detail the production of palladium hydride particles supported on CN (PdH@CN) via a facile method. PdH@CN displays excellent FOR performance, reaching current densities up to 5.6 A·mg and stable cycling and chronoamperometric operation. The Pd lattice expands due to the hydrogen intercalation. Besides, an electronic redistribution associated with the distinct electronegativity of Pd and H is observed. Both phenomena modify the electron energy levels, enhancing the activity and stability of the composite catalyst. More specifically, differential functional theory calculations show H intercalation to downshift the Pd d-band center in Pd@CN, weakening adsorbate binding and accelerating the FOR rate-determining step.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Self-supported NiO/CuO electrodes to boost urea oxidation in direct urea fuel cells

  • Yang, Linlin|||0009-0006-9953-5698
  • He, Ren|||0000-0003-3712-5539
  • Wang, Xiang
  • Yang, Tingting
  • Zhang, Ting|||0000-0002-0317-9662
  • Zuo, Yong|||0000-0003-1564-467X
  • Lu, Xuan|||0000-0003-2453-2805
  • Liang, Zhifu
  • Li, Junshan|||0000-0002-1482-1972
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Martínez-Alanis, Paulina R.|||0000-0003-3675-4472
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Direct urea fuel cells (DUFCs) can be used to treat residual wastewater while generating electricity. Herein, self-supported electrodes consisting of NiO nanosheets vertically grown on CuO nanowires are synthesized to realize the urea oxidation reaction (UOR). Such electrodes show excellent UOR performance requiring 1.39 V vs. RHE to achieve 100 mA/cm. Besides, DUFCs provide open circuit voltages and power densities up to 0.88 V and 11.35 mW/cm. Electrochemical characterization and Raman spectroscopy prove the formation of NiOOH to enable the UOR. Mott-Schottky analysis and UV photoelectron spectroscopy show the NiO/CuO p-p heterostructure to facilitate the charge transfer from CuO nanowires to NiO nanosheets. Besides, at a local level, density functional theory calculations show that the presence of CuO modulates the electronic states of Ni at the very NiOOH/CuO interface, which results in stretched Ni-O bonds and a uniquely elongated N-H bond of urea that favors its oxidation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A CrMnFeCoNi high entropy alloy boosting oxygen evolution/reduction reactions and zinc-air battery performance

  • He, Ren|||0000-0003-3712-5539
  • Yang, Linlin|||0009-0006-9953-5698
  • Zhang, Yu|||0000-0002-0332-0013
  • Wang, Xiang
  • Lee, Seungho|||0000-0002-6962-8598
  • Zhang, Ting|||0000-0002-0317-9662
  • Li, Lingxiao|||0000-0003-1628-2738
  • Liang, Zhifu
  • Chen, Jingwei
  • Li, Junshan|||0000-0002-1482-1972
  • Ostovari Moghaddam, Ahmad|||0000-0002-5316-3773
  • Llorca, Jordi|||0000-0002-7447-9582
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Xu, Ying
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The development of cost-effective, high-activity and stable bifunctional catalysts for the oxygen reduction and evolution reactions (ORR/OER) is essential for zinc-air batteries (ZABs) to reach the market. Such catalysts must contain multiple adsorption/reaction sites to cope with the high demands of reversible oxygen electrodes. Herein, we propose a high entropy alloy (HEA) based on relatively abundant elements as a bifunctional ORR/OER catalyst. More specifically, we detail the synthesis of a CrMnFeCoNi HEA through a low-temperature solution-based approach. Such HEA displays superior OER performance with an overpotential of 265 mV at a current density of 10 mA/cm, and a 37.9 mV/dec Tafel slope, well above the properties of a standard commercial catalyst based on RuO. This high performance is partially explained by the presence of twinned defects, the incidence of large lattice distortions, and the electronic synergy between the different components, being Cr key to decreasing the energy barrier of the OER rate-determining step. CrMnFeCoNi also displays superior ORR performance with a half-potential of 0.78 V and an onset potential of 0.88 V, comparable with commercial Pt/C. The potential gap (Egap) between the OER overpotential and the ORR half-potential of CrMnFeCoNi is just 0.734 V. Taking advantage of these outstanding properties, ZABs are assembled using the CrMnFeCoNi HEA as air cathode and a zinc foil as the anode. The assembled cells provide an open-circuit voltage of 1.489 V, i.e. 90% of its theoretical limit (1.66 V), a peak power density of 116.5 mW/cm, and a specific capacity of 836 mAh/g that stays stable for more than 10 days of continuous cycling, i.e. 720 cycles @ 8 mA/cm and 16.6 days of continuous cycling, i.e. 1200 cycles @ 5 mA/cm.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Combined Defect and Heterojunction Engineering in ZnTe/CoTe2@NC Sulfur Hosts Toward Robust Lithium-Sulfur Batteries

  • Huang, Chen
  • Yu, Jing|||0000-0002-7620-745X
  • Li, Canhuang
  • Cui, Zhibiao
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Zhang, Chao Yue
  • Nan, Bingfei|||0000-0002-7128-6056
  • Li, Junshan|||0000-0002-1482-1972
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Lithium-sulfur batteries (LSBs) are feasible candidates for the next generation of energy storage devices, but the shuttle effect of lithium polysulfides (LiPSs) and the poor electrical conductivity of sulfur and lithium sulfides limit their application. Herein, a sulfur host based on nitrogen-doped carbon (NC) coated with small amount of a transition metal telluride (TMT) catalyst is proposed to overcome these limitations. The properties of the sulfur redox catalyst are tuned by adjusting the anion vacancy concentration and engineering a ZnTe/CoTe2 heterostructures. Theoretical calculations and experimental data demonstrate that tellurium vacancies enhance the adsorption of LiPSs, while the formed TMT/TMT and TMT/C heterostructures as well as the overall architecture of the composite simultaneously provide high Li+ diffusion and fast electron transport. As a result, v-ZnTe/CoTe2atsignNC/S sulfur cathodes show excellent initial capacities up to 1608 mA h g-1 at 0.1C and stable cycling with an average capacity decay rate of 0.022% per cycle at 1C during 500 cycles. Even at a high sulfur loading of 5.4 mg cm-2, a high capacity of 1273 mA h g-1 at 0.1C is retained, and when reducing the electrolyte to 7.5 µL mg-1, v-ZnTe/CoTe2@NC/S still maintains a capacity of 890.8 mA h g-1 after 100 cycles at 0.1C.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Promoting Polysulfide Redox Reactions through Electronic Spin Manipulation

  • Yu, Jing|||0000-0002-7620-745X
  • Huang, Chen
  • Usoltsev, Oleg|||0000-0002-1537-3497
  • Black Serra, Ashley Phillip|||0000-0001-7929-5144
  • Gupta, Kapil|||0000-0002-4826-6620
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Pinto-Huguet, Ivan
  • Botifoll, Marc|||0000-0002-4876-6393
  • Li, Canhuang
  • Herrero-Martín, Javier|||0000-0003-1986-8128
  • Zhou, Jin Yuan
  • Ponrouch, Alexandre|||0000-0002-8232-6324
  • Zhao, Ruirui|||0000-0002-6016-5275
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Zhang, Chao Yue
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Catalytic additives able to accelerate the lithium-sulfur redox reaction are a key component of sulfur cathodes in lithium-sulfur batteries (LSBs). Their design focuses on optimizing the charge distribution within the energy spectra, which involves refinement of the distribution and occupancy of the electronic density of states. Herein, beyond charge distribution, we explore the role of the electronic spin configuration on the polysulfide adsorption properties and catalytic activity of the additive. We showcase the importance of this electronic parameter by generating spin polarization through a defect engineering approach based on the introduction of Co vacancies on the surface of CoSe nanosheets. We show vacancies change the electron spin state distribution, increasing the number of unpaired electrons with aligned spins. This local electronic rearrangement enhances the polysulfide adsorption, reducing the activation energy of the Li-S redox reactions. As a result, more uniform nucleation and growth of LiS and an accelerated liquid-solid conversion in LSB cathodes are obtained. These translate into LSB cathodes exhibiting capacities up to 1089 mA h g at 1 C with 0.017% average capacity loss after 1500 cycles, and up to 5.2 mA h cm, with 0.16% decay per cycle after 200 cycles in high sulfur loading cells.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enhancing the Thermoelectric and Mechanical Properties of p-Type PbS through Band Convergence and Microstructure Regulation

  • Li, Mengyao|||0000-0002-9082-7938
  • Zhao, Xueke
  • Wang, Dongyang|||0000-0001-8149-7394
  • Han, Xu|||0000-0001-8319-8830
  • Yang, Dawei|||0000-0002-3842-8286
  • Wu, Benteng
  • Song, Hongzhang|||0000-0001-9665-9747
  • Jia, Mochen|||0000-0003-4709-6233
  • Liu, Yu|||0000-0001-7313-6740
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
While lead sulfide shows notable thermoelectric properties, its production costs remain high, and its mechanical hardness is low, which constrains its commercial viability. Herein, we demonstrate a straightforward and cost-effective method to produce PbS nanocrystals at ambient temperature. By introducing controlled amounts of silver, we achieve p-type conductivity and fine-tune the energy band structure and lattice configuration. Computational results show that silver shifts the Fermi level into the valence band, facilitating band convergence and thereby enhancing the power factor. Besides, excess silver is present as silver sulfide, which effectively diminishes the interface barrier and enhances the Seebeck coefficient. Defects caused by doping, along with dislocations and interfaces, reduce thermal conductivity to 0.49 W m-1 K-1 at 690 K. Moreover, the alterations in crystal structure and chemical composition enhance the PbS mechanical properties. Overall, optimized materials show thermoelectric figures of merit approximately 10-fold higher than that of pristine PbS, alongside an average hardness of 1.08 GPa.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Anionic Doping in Layered Transition Metal Chalcogenides for Robust Lithium-Sulfur Batteries

  • Huang, Chen
  • Yu, Jing|||0000-0002-7620-745X
  • Zhang, Chao Yue
  • Cui, Zhibiao
  • He, Ren|||0000-0003-3712-5539
  • Yang, Linlin|||0009-0006-9953-5698
  • Nan, Bingfei|||0000-0002-7128-6056
  • Li, Canhuang
  • Qi, Xuede|||0009-0008-5723-3629
  • Li, Junshan|||0000-0002-1482-1972
  • Yuan Zhou, Jin
  • Usoltsev, Oleg|||0000-0002-1537-3497
  • Simonelli, Laura|||0000-0001-5331-0633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Lei, Yao-Jie
  • Sun, Qing|||0000-0002-9145-7772
  • Wang, Guoxiu
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Lithium-sulfur batteries (LSBs) are among the most promising next-generation energy storage technologies. However, a slow Li-S reaction kinetics at the LSB cathode limit their energy and power densities. To address these challenges, this study introduces an anionic-doped transition metal chalcogenide as an effective catalyst to accelerate the Li-S reaction. Specifically, a tellurium-doped, carbon-supported bismuth selenide with Se vacancies (Te-Bi2Se3-x@C) is prepared and tested as a sulfur host in LSB cathodes. X-ray absorption and in situ X-ray diffraction analyses reveal that Te doping induces lattice distortions and modulates the local coordination environment and electronic structure of Bi atoms to promote the catalytic activity toward the conversion of polysulfides. Additionally, the generated Se vacancies alter the electronic structure around atomic defect sites, increase the carrier concentration, and activate unpaired cations to effectively trap polysulfides. As a result, LSBs based on Te-Bi2Se3-x@C/S cathodes demonstrate outstanding specific capacities of 1508 mAh ⋅ g-1 at 0.1 C, excellent rate performance with 655 mAh ⋅ g-1 at 5 C, and near-integral cycle stability over 1000 cycles. Furthermore, under high sulfur loading of 6.4 mg ⋅ cm-2, a cathode capacity exceeding 8 mAh ⋅ cm-2 is sustained at 0.1 C current rate, with 6.4 mAh ⋅ cm-2 retained after 300 cycles under lean electrolyte conditions (6.8 μL ⋅ mg-1).
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Colloidal Ag2SbBiSe4 nanocrystals as n-type thermoelectric materials

  • Nan, Bingfei|||0000-0002-7128-6056
  • Yu, Jing|||0000-0002-7620-745X
  • Li, Mengyao|||0000-0002-9082-7938
  • Huang, Chen
  • Chen, Hongyu
  • Zhang, Hao
  • Chang, Cheng|||0000-0002-9515-4277
  • Li, Junshan|||0000-0002-1482-1972
  • Song, Xuan
  • Guo, Kai|||0000-0002-8486-4185
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Materials with low intrinsic thermal conductivity are essential for the development of high-performance thermoelectric devices. At the same time, the solution processing of these materials may enable the cost-effective production of the devices. Herein, we detail a high-yield and scalable colloidal synthesis route to produce AgSbBiSe nanocrystals (NCs) using amine-thiol-Se chemistry. The quaternary chalcogenide material is consolidated by a rapid hot-press maintaining the cubic crystalline structure. Transport measurements confirm that n-type AgSbBiSe exhibits an inherently ultralow lattice thermal conductivity of ca. 0.34 W mK at 760 K. Moreover, a modulation doping strategy based on the blending of semiconductor AgSbBiSe and metallic Sn NCs is demonstrated to control the charge carrier concentration in the final composite material. The introduction of Sn nanodomains additionally blocks phonon propagation thus contributing to reducing the thermal conductivity of the final material. Ultimately, a peak thermoelectric figure of merit value of 0.64 at 760 K is achieved for n-type AgSbBiSe-Sn nanocomposites that also demonstrate a notable Vickers hardness of 185 HV.
Dipòsit Digital de Documents de la UAB
Publication Artículo de revisión (ReviewArticle)

Synthesis Strategies for High Entropy Nanoparticles

  • Yang, Linlin|||0009-0006-9953-5698
  • He, Ren|||0000-0003-3712-5539
  • Chai, Jiali
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Xue, Qian
  • Bi, Xiaoyu
  • Yu, Jing|||0000-0002-7620-745X
  • Sun, Zixu
  • Xia, Lu
  • Wang, Kaiwen|||0000-0002-1046-4525
  • Kapuria, Nilotpal|||0000-0002-6002-7753
  • Li, Junshan|||0000-0002-1482-1972
  • Ostovari Moghaddam, Ahmad|||0000-0002-5316-3773
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Nanoparticles (NPs) of high entropy materials (HEMs) have attracted significant attention due to their versatility and wide range of applications. HEM NPs can be synthesized by fragmenting bulk HEMs or disintegrating and recrystallizing them. Alternatively, directly producing HEMs in NP form from atomic/ionic/molecular precursors presents a significant challenge. A widely adopted strategy involves thermodynamically driving HEM NP formation by leveraging the entropic contribution but incorporating strategies to limit NP growth at the elevated temperatures used for maximizing entropy. A second approach is to kinetically drive HEM NP formation by promoting rapid reactions of homogeneous reactant mixtures or using highly diluted precursor dissolutions. Additionally, experimental evidence suggests that enthalpy plays a significant role in driving HEM NP formation processes at moderate temperatures, with the high energy cost of generating additional surfaces and interfaces at the nanoscale stabilizing the HEM phase. This review critically assesses the various synthesis strategies developed for HEM NP preparation, highlighting key illustrative examples and offering insights into the underlying formation mechanisms. Such insights are critical for fine-tuning experimental conditions to achieve specific outcomes, ultimately enabling the effective synthesis of optimized generations of these advanced materials for both current and emerging applications across various scientific and technological fields.
Dipòsit Digital de Documents de la UAB
Publication Artículo de revisión (ReviewArticle)

Aqueous ammonium-ion hybrid supercapacitors

  • Dai, Juguo
  • Yang, Yizhang
  • Yu, Jing|||0000-0002-7620-745X
  • Fu, Hucheng
  • Xu, Yiting
  • Qin, Qiaoyun
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Dai, Lizong|||0000-0001-8049-4263
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Aqueous ammonium ion supercapacitors have garnered significant attention in recent years owing to their exceptional performance, environmentally sustainable, and safe nature, as well as their potential for cost-effectiveness. Despite notable progress in developing this technology, several challenges remain. These include identifying electrode materials with high specific capacity, comprehensively understanding the intercalation mechanism of ammonium ions, and clarifying how these ions interact with the electrode materials. This review article provides a comprehensive examination of the latest developments in the field, including aspects such as electrolyte composition, mechanisms of ammonium ion insertion, and advancements in electrode materials. Additionally, we offer insights into potential solutions to overcome the current limitations faced by ammonium ion supercapacitors, paving the way for further innovation and application of this promising technology.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Improved Mn4+/Mn2+ Contribution in High-Voltage Zn-MnO2 Batteries Enabled by an Al3+-Ion Electrolyte

  • Chang, Xingqi|||0000-0002-2604-0233
  • Chacón Borrero, Jesús|||0000-0001-9792-6720
  • Shang, Jian
  • Xiao, Ke
  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Mejia-Centeno, Karol V.|||0000-0002-6353-4769
  • Lu, Xuan|||0000-0003-2453-2805
  • Yu, Ao
  • Yu, Jing|||0000-0002-7620-745X
  • Zhou, Xiaolong|||0000-0002-3763-4133
  • Tunmee, Sarayut
  • Kidkhunthod, Pinit
  • Cui, Changcai|||0000-0002-8023-7934
  • Li, Junshan|||0000-0002-1482-1972
  • Tang, Yongbing|||0000-0003-2705-4618
  • Martínez-Alanis, Paulina R.|||0000-0003-3675-4472
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Rechargeable aqueous Zn-MnO2 batteries are attracting attention as a cost-effective and safe energy storage solution, but their commercialization faces challenges due to limited stability, output voltage, and energy density. Herein, a hybrid-ion Zn-MnO2 system with enhanced Mn4+/Mn2+ electrochemical contribution is introduced using an Al3+-based electrolyte. Compared with conventional Zn2+ electrolytes, the hybrid Al3+/Zn2+ cell offers higher output voltage of 1.75 V, capacities up to 469 mAh g-1, and outstanding energy densities up to ≈730 Wh kg-1 at 0.3 A g-1. Besides, the Al3+-enabled Zn-MnO2 battery shows 100% capacity and energy density retention after 10,000 cycles at 2 A g-1. Even at a high mass-loading of 6.2 mg cm-2, a capacity of ≈200 mAh g-1 is maintained for over 100 cycles. This outstanding performance is related to the contribution of different intercalation and reaction mechanisms, as proved by the combination of electrochemical analysis and ex-situ x-ray diffraction characterization of the cells at different discharge stages. Al3+ ions, as Lewis strong acid, contribute to capacity in two significant ways: through a highly reversible intercalation/de-intercalation that substantially boosts capacitance at low current rates, and promoting the Mn4+/Mn2+ reaction aided by H+ that dominates the capacitance at higher current rates. Overall, this work demonstrates a practical Zn-MnO2 battery with a high potential for low-cost stationary energy storage habilitated by multiple ion co-intercalation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Two-Dimensional Transition Metal Phosphides As Cathode Additive in Robust Lithium-Sulfur Batteries

  • Zhang, Jie
  • Yang, Dawei|||0000-0002-3842-8286
  • Li, Canhuang
  • Gong, Qianhong
  • Bi, Wei
  • Zheng, Xuejiao
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Li, Shengjun|||0000-0002-0377-6862
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The development of advanced cathode materials able to promote the sluggish redox kinetics of polysulfides is crucial to bringing lithium-sulfur batteries to the market. Herein, two electrode materials: namely, ZrPS and ZrPTe, are identified through screening several hundred thousand compositions in the Inorganic Crystal Structure Database. First-principles calculations are performed on these two materials. These structures are similar to that of the classical MXenes. Concurrently, calculations show that ZrPS and ZrPTe possess high electrical conductivity, promote Li ion diffusion, and have excellent electrocatalytic activity for the Li-S reaction and particularly for the LiS decomposition. Besides, the mechanisms behind the excellent predicted performance of ZrPS and ZrPTe are elucidated through electron localization function, charge density difference, and localized orbital locator. This work not only identifies two candidate sulfur cathode additives but may also serve as a reference for the identification of additional electrode materials in new generations of batteries, particularly in sulfur cathodes.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Promoting Electrochemical Reactions with Dual-Atom Catalysts for High-Rate Lithium-Sulfur Batteries

  • Yu, Jing|||0000-0002-7620-745X
  • Usoltsev, Oleg|||0000-0002-1537-3497
  • Martynova, Irina
  • Huang, Chen
  • Liang, Zhifu
  • Pinto-Huguet, Ivan
  • Li, Canhuang
  • Lu, Liqiang
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Lu, Xuan|||0000-0003-2453-2805
  • Gupta, Kapil|||0000-0002-4826-6620
  • Botifoll, Marc|||0000-0002-4876-6393
  • Simonelli, Laura|||0000-0001-5331-0633
  • Fauth, François|||0000-0001-9465-3106
  • Zhou, Jin Yuan
  • Llorca, Jordi|||0000-0002-7447-9582
  • Lu, Yan|||0000-0003-3055-0073
  • Zhang, Chao Yue
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Sulfur cathodes offer a promising solution for high-energy-density, cost-effective, and sustainable energy storage. However, their practical application is limited by sluggish and complex multistep sulfur redox reactions (SRRs), involving both electrochemical and chemical processes. Herein, it is demonstrated that accelerating electrochemical processes, particularly LiS nucleation, over competing chemical pathways is fundamental to minimizing sulfur loss and achieving high-rate performance. To this end, a scalable and cost-effective strategy is presented for synthesizing a series of 3d transition metal-bismuth (TM-Bi) atomic pairs anchored on carbon nitride (CN) and investigate their potential to activate SRRs in lithium-sulfur batteries (LSBs). An initial screening identifies Ni-Bi/CN and Co-Bi/CN as highly effective in improving rate performance. Detailed analysis shows these catalysts promote direct electrochemical transitions and rapid LiS nucleation over competing chemical reactions, enabling high charge-discharge rates while preventing active material loss and enhancing stability. Electrochemical analysis, density functional theory, and operando spectroscopy reveal that TM-Bi pairing shifts d-band states closer to the Fermi level and modulates HOMO-LUMO levels, promoting lithium polysulfide (LiPS) interaction and facilitating efficient charge transfer. These findings offer valuable insights for designing advanced catalysts for LSBs and broader electrocatalytic applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Boosting Polysulfide Conversion on Fe-Doped Nickel Diselenide Toward Robust Lithium-Sulfur Batteries

  • Li, Junshan|||0000-0002-1482-1972
  • Yu, Jing|||0000-0002-7620-745X
  • Zhang, Yong
  • Li, Canhuang
  • Ma, Yi
  • Ge, Huan
  • Jian, Ning
  • Li, Luming
  • Zhang, Chao Yue
  • Zhou, Jin Yuan
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Sulfur offers a high-energy-density, low-cost, and sustainable alternative to traditional battery cathodes, but its practical use is limited by sluggish and uneven reaction and polysulfide dissolution, necessitating electrocatalytic additives to enhance conversion efficiency. Generating unpaired spin electrons has proven effective in enhancing performance in Co-based electrocatalysts. These unpaired electrons increase polysulfide conversion by enhancing adsorption and weakening S─S bonds, facilitating their cleavage during sulfur reduction reactions. This work extends the strategy to Fe-Ni-based catalysts. The synthesis of NiSe and Fe-doped NiSe particles is reported and investigate the impact of Fe doping on the electronic structure, catalytic activity, and performance of NiSe is introduced as a coating on the cathode side of the Li-S battery (LSB) separator. Experimental analyses and first-principles calculations reveal that Fe-rich cores and surface doping in NiSe enhance the density of states at the Fermi level and introduce unpaired electrons, boosting LiPS adsorption and catalytic conversion. These synergistic effects significantly improve the catalytic performance, cycling stability, and overall performance of LSB cells. Specifically, LSB cells based on Fe-doped NiSe-based separators achieve specific capacities of 1483 mAh g⁻¹ at 0.1C and 1085 mAh g⁻¹ at 1C, along with remarkable cycling stability, retaining 84.4% capacity after 800 cycles. High sulfur-loading tests further validate the multifunctional membrane's effectiveness, showing significant capacity retention and reduced polysulfide loss.
Dipòsit Digital de Documents de la UAB
Publication Artículo de revisión (ReviewArticle)

Mechanistic Insights and Technical Challenges in Sulfur-Based Batteries, A Comprehensive In Situ/Operando Monitoring Toolbox

  • Yu, Jing|||0000-0002-7620-745X
  • Pinto-Huguet, Ivan
  • Zhang, Chao Yue
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Xu, Yaolin|||0000-0002-2658-3852
  • Vizintin, Alen|||0000-0003-1876-1396
  • Velasco-Vélez, Juan-Jesús|||0000-0002-6595-0168
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Pan, Xiaobo|||0000-0002-5757-2339
  • Oney, Gozde
  • Olgo, Annabel
  • Märker, Katharina|||0000-0002-5056-7174
  • M. Da Silva, Leonardo
  • Luo, Yufeng
  • Lu, Yan|||0000-0003-3055-0073
  • Huang, Chen
  • Härk, Eneli|||0000-0001-5758-8106
  • Fleming, Joe
  • Chenevier, Pascale|||0000-0003-4358-2162
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Bai, Yunfei
  • Botifoll, Marc|||0000-0002-4876-6393
  • Black Serra, Ashley Phillip|||0000-0001-7929-5144
  • An, Qi
  • Amietszajew, Tazdin|||0000-0001-7452-1034
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Batteries based on sulfur cathodes offer a promising energy storage solution due to their potential for high performance, cost-effectiveness, and sustainability. However, commercial viability is challenged by issues such as polysulfide migration, volume changes, uneven phase nucleation, limited ion transport, and sluggish sulfur redox kinetics. Addressing these challenges requires insights into the structural, morphological, and chemical evolution of phases, the associated volume changes and internal stresses, and ion and polysulfide diffusion within the battery. Such insights can only be obtained through real-time reaction monitoring within the battery's operational environment, supported by molecular dynamics simulations and advanced artificial intelligence-driven data analysis. This review provides an overview of in situ/operando techniques for real-time tracking of these processes in sulfur-based batteries and explores the integration of simulations with experimental data to provide a holistic understanding of the critical challenges, enabling advancements in their development and commercial adoption.
Dipòsit Digital de Documents de la UAB
Publication Artículo de revisión (ReviewArticle)

Spin-modulated catalysis in sulfur cathodes for improved performance in lithium-sulfur batteries

  • Zhang, Chao Yue
  • Yu, Jing|||0000-0002-7620-745X
  • Huang, Chen
  • Cabello, Gema
  • Qi, Xuede|||0009-0008-5723-3629
  • Sun, Guo Wen
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • He, Ren|||0000-0003-3712-5539
  • Yang, Dawei|||0000-0002-3842-8286
  • Li, Canhuang
  • Li, Junshan|||0000-0002-1482-1972
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Rubio Garcia, Javier
  • Estrader i Bofarull, Marta|||0000-0003-3379-8234
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zhou, Jin Yuan
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The rapid growth of electric vehicles and the increasing integration of renewable energy into the grid have heightened the demand for high-capacity energy storage systems based on abundant, low-cost materials. To address the limitations of conventional ion-intercalation batteries, conversion-type electrodes have gained significant attention, as their energy storage relies on chemical redox reactions often requiring activation or acceleration via electrocatalysis. Recent studies reveal that electrocatalytic activity is governed not only by active-site density and charge-carrier availability, but also by the spin states of electrons within the catalyst. Consequently, understanding the role of electronic spin states in battery performance, and how to manipulate them to enhance energy storage, has become a critical research frontier. This review provides a comprehensive overview of current strategies to modulate spin states in electrocatalysts for conversion-type cathodes. While external magnetic fields remain the primary method to probe and control electron spin, more practical and scalable approaches, such as atomic coordination engineering and surface spin filters, are emerging. Particular focus is given to sulfur cathodes, which offer exceptional theoretical energy density and capacity but depend heavily on catalytic hosts to enable efficient sulfur redox reactions. The review also surveys experimental techniques for probing spin states and theoretical approaches for modeling spin-related phenomena at the atomic scale. Finally, it highlights emerging research directions, underscoring the potential of spin-state modulation as a transformative strategy for next-generation energy storage technologies.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ca2+-Preintercalated V2O5as a Dual-Function Cathode Additive for Polyiodide Anchoring in Zn-I2Batteries

  • Bi, Xiaoyu
  • Yu, Ao
  • Zhang, Jing
  • Yu, Jing|||0000-0002-7620-745X
  • Li, Canhuang
  • Ren, Yuchuan|||0000-0002-6870-4149
  • Lin, Kaifu|||0009-0002-3670-773X
  • Chai, Jiali
  • Xue, Qian
  • Xie, Yanting
  • Cheng, Yapeng|||0000-0002-9218-9095
  • Chang, Xingqi|||0000-0002-2604-0233
  • Lu, Xuan|||0000-0003-2453-2805
  • Yang, Linlin|||0009-0006-9953-5698
  • He, Ren|||0000-0003-3712-5539
  • Zeng, Guifang|||0000-0002-5927-4730
  • Huang, Chen
  • Qi, Xuede|||0009-0008-5723-3629
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Jacob, Timo|||0000-0001-7777-2306
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Aqueous zinc-iodine (Zn-I) batteries have attracted considerable attention due to their abundant resources, high safety, and environmental friendliness. However, challenges inherent to conversion-type electrodes, including severe active material shuttling and suboptimal Coulombic efficiency, continue to limit their performance. Here, we present a high-performance Zn-Ibattery enabled by calcium-ion-preintercalated VO(CaVO) nanobelts as a cathode additive. By harnessing the synergistic effects of physical trapping (via activated carbon and interlayer confinement in CaVO) and chemical adsorption (through Cabinding sites), the hybrid host framework achieves superior immobilization of iodine species while simultaneously shortening Zndiffusion pathways, thereby facilitating efficient I/Iredox kinetics. Furthermore, Ca-induced crystal structure modification enhances the Zntransport and provides additional capacity contributions. As a result, Zn-Icells employing I-loaded CaVO (CaVO/AC@I) composite cathodes deliver a high specific capacity of 244 mAh gat 0.2 A g, outstanding rate performance with 78.5% capacity retention at 5 A g, and an impressive energy density of 279 Wh kg, based on the combined mass of Iand CaVO. This work presents a hybrid energy storage strategy for Zn-Isystems, providing a feasible approach for the development of next-generation high-performance aqueous batteries.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Oxophilic Sn to Promote Glucose Oxidation to Formic Acid in Ni Nanoparticles

  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Mejia-Centeno, Karol V.|||0000-0002-6353-4769
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Xue, Qian
  • Chacón Borrero, Jesús|||0000-0001-9792-6720
  • Salutari, Francesco|||0000-0002-5802-8941
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Andreu, Teresa|||0000-0002-2804-4545
  • Salazar Álvarez, Germán|||0000-0002-0671-435X
  • Güell, Frank|||0000-0002-6528-9007
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Martínez-Alanis, Paulina R.|||0000-0003-3675-4472
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The electrochemical glucose oxidation reaction (GOR) presents an opportunity to produce hydrogen and high-value chemical products. Herein, we investigate the effect of Sn in Ni nanoparticles for the GOR to formic acid (FA). Electrochemical results show that the maximum activity is related to the amount of Ni, as Ni sites are responsible for catalyzing the GOR via the NiOOH/Ni(OH) pair. However, the GOR kinetics increases with the amount of Sn, associated with an enhancement of the OH supply to the catalyst surface for Ni(OH) reoxidation to NiOOH. NiSn nanoparticles supported on carbon nanotubes (NiSn/CNT) exhibit excellent current densities and direct GOR via C-C cleavage mechanism, obtaining FA with a Faradaic efficiency (FE) of 93 % at 1.45 V vs. reversible hydrogen electrode. GOR selectivity is further studied by varying the applied potential, glucose concentration, reaction time, and temperature. FE toward FA production decreases due to formic overoxidation to carbonates at low glucose concentrations and high applied potentials, while acetic and lactic acids are obtained with high selectivity at high glucose concentrations and 55 °C. Density functional theory calculations show that the SnO facilitates the adsorption of glucose on the surface of Ni and promotes the formation of the catalytic active Ni species.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Electron delocalization engineering via hierarchical modulation in single-atom catalysts for highly efficient electrochemical CO2 reduction

  • Han, Xu|||0000-0001-8319-8830
  • Liu, Hong|||0000-0003-3165-8764
  • Cao, Pengfei
  • Tang, Weiqiang|||0000-0002-7726-4130
  • Zhang, Chao Yue
  • Biset-Peiró, Martí|||0000-0002-1255-7733
  • Xiao, Ke
  • Tang, PengYi|||0000-0002-2306-095X
  • Heggen, Marc|||0000-0002-2646-0078
  • Vega-Paredes, Miquel|||0000-0001-9916-0167
  • Garzón Manjón, Alba|||0000-0003-2954-1102
  • Zheng, Lirong
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Daasbjerg, Kim|||0000-0003-0212-8190
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Zhang, Ting|||0000-0002-0317-9662
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Modulating the coordination of atomically dispersed MN moieties to enhance electron asymmetry presents a promising strategy for improving catalytic performance in the electrochemical reduction of carbon dioxide (eCORR). By combining small amounts of Au nanoclusters with lateral oxygen coordination in the first coordination shell, the enhanced electron delocalization on Ni centers improves both activity and selectivity. Experimentally, the optimized catalyst demonstrates exceptional catalytic performance, achieving over 95% Faradaic efficiency (FE) for CO across a broad potential range from - 0.50 to - 0.85 V vs. RHE. It also achieves over 90% FE for CO at an overpotential of 340 mV, outperforming state-of-the-art Ni-based single-atom catalysts (SACs). Moreover, the catalyst shows promising potential at a higher current density (∼150 mA cm) in a flow cell, maintaining high CO selectivity (over 90%). Structural characterizations and theoretical calculations indicate that this structure enhances electron redistribution around Ni sites through a unique electron tug effect. This effectively stabilizes *COOH intermediates, favoring CO production during eCORR at low applied potentials. This work offers a valuable method that extends beyond the first coordination shell, augmenting the complexity of electronic distribution on metal centers, which could be adapted for further fine-tuning the catalytic behavior of SACs in various reactions.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Balancing Electronic Spin State via Atomically-Dispersed Heteronuclear Fe-Co Pairs for High-Performance Sodium-Sulfur Batteries

  • Li, Canhuang
  • Yu, Jing|||0000-0002-7620-745X
  • Yang, Dawei|||0000-0002-3842-8286
  • Li, Hao|||0000-0002-4740-5908
  • Cheng, Yapeng|||0000-0002-9218-9095
  • Ren, Yuchuan|||0000-0002-6870-4149
  • Bi, Xiaoyu
  • Ma, Jiachen|||0000-0002-5553-2464
  • Zhao, Ruirui|||0000-0002-6016-5275
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Wang, Jian
  • Huang, Chen
  • Li, Junshan|||0000-0002-1482-1972
  • Pinto-Huguet, Ivan
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zhang, Haining|||0000-0002-5546-2347
  • Xin, Sen|||0000-0002-0546-0626
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Room-temperature sodium-sulfur (Na-S) batteries are emerging as a promising next-generation energy storage technology, offering high energy densities at low cost and utilizing abundant elements. However, their practical application is hindered by the shuttle effect of sodiumpolysulfides and the sluggish kinetics of sulfur redox reactions. In this study, we demonstrate a heteronuclear diatomic catalyst featuring Fe and Co bimetallic sites embedded in nitrogendoped hollow carbon nanospheres (Fe-Co/NC) as an effective sulfur host at the cathode of NaS batteries. Aberration-corrected high-angle annular dark field scanning transmission electron microscopy demonstrates the presence of isolated Fe-Co atomic pairs, while synchrotron radiation X-ray absorption fine structure analysis confirms the (Fe-Co-N₆) coordination structure. Density functional theory calculations show that the introduction of Fe atoms induces electron delocalization in Co(II), shifting the electronic configuration from a low-spin to a higher-spin state. This shift enhances the hybridization of the Co dz² orbitals with the antibonding π orbitals of sulfur atoms within the sodium sulfide species that accelerates their catalytic conversion. As a result, Fe-Co/NC-based cathodes exhibit excellent cycling stability (378 mAh g-1 after 2000 cycles) and impressive rate performance (341.1 mAh g-1 under 5 A g-1).
Repisalud
Publication Artículo científico (JournalArticle)

Effects of Hepatitis C Virus (HCV) Eradication on Bone Mineral Density in Human Immunodeficiency Virus/HCV-Coinfected Patients

  • Carrero, Ana
  • Berenguer, Juan
  • Hontañón, Víctor
  • Guardiola, Josep M
  • Navarro, Jordi
  • Von Wichmann, Miguel A
  • Téllez, María Jesús
  • Quereda, Carmen
  • Santos, Ignacio
  • Sanz, José
  • Galindo, María J
  • Hernández-Quero, José
  • Jimenez-Sousa, Maria Angeles
  • Pérez-Latorre, Leire
  • Bellón, José María
  • Resino, Salvador
  • Esteban, Herminia
  • Martínez, Esteban
  • González-García, Juan
Background: Little is known about the effects of eradication of hepatitis C virus (HCV) on bone mineral density (BMD) and biomarkers of bone remodeling in human immunodeficiency virus (HIV)/HCV-coinfected patients. Methods: We prospectively assessed standardized BMD (sBMD) at the lumbar spine and femoral neck, World Health Organization BMD categories at both sites, and plasma concentrations of soluble receptor activator of NF-κβ ligand (sRANKL), and osteoprotegerin (OPG) at baseline (the date of initiation of anti-HCV therapy) and at 96 weeks. Results: A total of 238 patients were included. The median age was 49.5 years, 76.5% were males, 48.3% had cirrhosis, 98.3% were on antiretroviral therapy, median CD4+ cell count was 527 cells/μL, and 86.6% had HIV-1 RNA <50 copies/mL. The prevalence of osteoporosis at baseline at the lumbar spine (LS) and femoral neck (FN) was 17.6% and 7.2%, respectively. Anti-HCV therapy comprised pegylated interferon (peg-IFN) and ribavirin (RBV) plus 1 direct-acting antiviral in 53.4%, peg-IFN/RBV in 34.5%, and sofosbuvir/RBV in 12.2%. A total of 145 (60.9%) patients achieved sustained virologic response (SVR). No significant effect of SVR was observed on sBMD for the interaction between time and SVR either in the LS (P = .801) or the FN (P = .911). Likewise, no significant effect of SVR was observed in plasma levels of sRANKL (P = .205), OPG (P = .249), or sRANKL/OPG ratio (P = .123) for the interaction between time and SVR. No significant correlation was found between fibrosis by transient elastography, and LS and FN sBMD, at baseline and week 96. Conclusions: SVR was not associated with significant changes in BMD nor biomarkers of bone remodeling in HIV/HCV-coinfected persons.
Repisalud
Publication Artículo científico (JournalArticle)

Kalirin and CHD7: novel endothelial dysfunction indicators in circulating extracellular vesicles from hypertensive patients with albuminuria

  • de la Cuesta, Fernando
  • Baldan-Martin, Montserrat
  • Moreno-Luna, Rafael
  • Alvarez-Llamas, Gloria
  • Gonzalez-Calero, Laura
  • Mourino-Alvarez, Laura
  • Sastre-Oliva, Tamara
  • Lopez, Juan Antonio
  • Vazquez, Jesus
  • Ruiz-Hurtado, Gema
  • Segura, Julian
  • Vivanco, Fernando
  • Ruilope, Luis M
  • Barderas, Maria G
Despite of the great advances in anti-hypertensive therapies, many patients under Renin-Angiotensin-System (RAS) suppression develop albuminuria, which is a clear indicator of therapeutic inefficiency. Hence, indicators of vascular function are needed to assess patients' condition and help deciding future therapies. Proteomic analysis of circulating extracellular vesicles (EVs) showed two proteins, kalirin and chromodomain-helicase-DNA-binding protein 7 (CHD7), increased in albuminuric patients. A positive correlation of both with the expression of the endothelial activation marker E-selectin was found in EVs. In vitro analysis using TNFa-treated adult human endothelial cells proved their involvement in endothelial cell activation. Hence, we propose protein levels of kalirin and CHD7 in circulating EVs as novel endothelial dysfunction markers to monitor vascular condition in hypertensive patients with albuminuria.
Repisalud
Publication Artículo científico (JournalArticle)

Plasma Molecular Signatures in Hypertensive Patients With Renin-Angiotensin System Suppression: New Predictors of Renal Damage and De Novo Albuminuria Indicators

  • Baldan-Martin, Montserrat
  • Mourino-Alvarez, Laura
  • Gonzalez-Calero, Laura
  • Moreno-Luna, Rafael
  • Sastre-Oliva, Tamara
  • Ruiz-Hurtado, Gema
  • Segura, Julian
  • Lopez, Juan Antonio
  • Vazquez, Jesus
  • Vivanco, Fernando
  • Alvarez-Llamas, Gloria
  • Ruilope, Luis M
  • de la Cuesta, Fernando
  • Barderas, Maria G
Albuminuria is a risk factor strongly associated with cardiovascular disease, the first cause of death in the general population. It is well established that renin-angiotensin system suppressors prevent the development of new-onset albuminuria in naïf hypertensive patients and diminish its excretion, but we cannot forget the percentage of hypertensive patients who develop de novo albuminuria. Here, we applied multiple proteomic strategy with the purpose to elucidate specific molecular pathways involved in the pathogenesis and provide predictors and chronic organ damage indicators. Briefly, 1143 patients were followed up for a minimum period of 3 years. One hundred and twenty-nine hypertensive patients chronically renin-angiotensin system suppressed were recruited, classified in 3 different groups depending on their albuminuria levels (normoalbuminuria, de novo albuminuria, and sustained albuminuria), and investigated by multiple proteomic strategies. Our strategy allowed us to perform one of the deepest plasma proteomic analysis to date, which has shown 2 proteomic signatures: (1) with predictive value of de novo albuminuria and (2) sustained albuminuria indicator proteins. These proteins are involved in inflammation, immune as well as in the proteasome activation occurring in situations of endoplasmic reticulum stress. Furthermore, these results open the possibility of a future strategy based on anti-immune therapy to treat hypertension which could help to prevent the development of albuminuria and, hence, the progression of kidney damage.
Repisalud
Publication Artículo científico (JournalArticle)

Plasma metabolomic fingerprint of advanced cirrhosis stages among HIV/HCV-coinfected and HCV-monoinfected patients

  • Salgüero Fernandez, Sergio
  • Rojo, David
  • Berenguer, Juan
  • González-García, Juan
  • Fernandez-Rodriguez, Amanda
  • Brochado-Kith, Oscar
  • Díez, Cristina
  • Hontañón, Víctor
  • Virseda-Berdices, Ana
  • Martínez, Javier
  • Ibañez-Samaniego, Luis
  • Llop-Herrera, Elba
  • Barbas, Coral
  • Resino, Salvador
  • Jimenez-Sousa, Maria Angeles
Background & aims: Hepatitis C virus (HCV), human immunodeficiency virus (HIV) and cirrhosis induce metabolic disorders. Here, we aimed to evaluate the association of plasma metabolites with Child-Turcotte-Pugh (CTP) score and hepatic decompensation in HIV/HCV-coinfected and HCV-monoinfected patients with advanced cirrhosis. Methods: A cross-sectional study was carried out in 62 HIV/HCV-coinfected and 28 HCV-monoinfected patients. Metabolomics analysis was performed by gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-mass spectrometry (LC-MS). The statistical association analysis was performed by partial least squares discriminant analysis (PLS-DA) and generalized linear model (GLM) with binomial distribution (to analyse HIV coinfection, high alcohol intake, treatment with statins, previous HCV therapy failure and decompensation) and ordinal logistic regression (OLR) models to analyse different stages of cirrhosis (CTP score). Results: The statistical analysis identified plasma metabolites associated with HIV coinfection, high alcohol intake, CTP score and hepatic decompensation. Overall, fatty acids, bile acids, aromatic and sulphur amino acids, butyrate derivatives, oxidized phospholipids, energy-related metabolites and bacterial fermentation-related metabolites were increased in more advanced cirrhosis stages; while lysophosphatidylcholines and lysophosphatidylethanolamines, branched-chain amino acids (BCAA) and metabolites of tricarboxylic acid cycle, among others, were decreased in more advanced cirrhosis. Most of the significant metabolites displayed a similar trend after stratifying for HIV/HCV- and HCV-infected patients. Glycolic acid, LPC (16:0) and taurocholic acid had high accuracy for discriminating patients according to decompensated cirrhosis (CTP ≥ 7). Conclusion: Altered plasma metabolomic profile was associated with advanced stages of cirrhosis in HIV/HCV-coinfected and HCV-monoinfected patients.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Roza, tumba y quema. Acompañamientos artísticos a la defensa del territorio mexicano (2016-2022)

  • Millón Sánchez, Beatriz
[ES] La presente tesis doctoral investiga las posibilidades del arte colaborativo comprometido con la defensa socio-ambiental a través de una práctica y metodología interdisciplinar llevada a cabo entre 2016 y 2022 por Bea Millón en diferentes contextos del territorio mexicano. A través de cuatro series, reformula las relaciones con el territorio, acciona proyectos críticos, anti-coloniales y ecologistas en diálogo con realidades corporales, materiales, y ambientales diversos. Estas series, que devienen en múltiples proyectos desarrollados principalmente en contextos extractivos, son a su vez investigaciones que producen otros saberes, sensibilidades y estrategias que retroalimentan la lucha por los bienes naturales desde el arte contemporáneo., [CA] La present tesi doctoral investiga les possibilitats de l'art col·laboratiu compromés amb la defensa soci-ambiental a través d'una pràctica i metodologia interdisciplinària duta a terme entre 2016 i 2022 per Bea Millón en diferents contextos del territori mexicà. A través de quatre sèries, reformula les relacions amb el territori, acciona projectes crítics, anti-colonials i ecologistes en diàleg amb realitats corporals, materials, i ambientals diversos. Aquestes sèries, que esdevenen en múltiples projectes desenvolupats principalment en contextos extractius, són al seu torn investigacions que produeixen altres sabers, sensibilitats i estratègies que retroalimenten la lluita pels béns naturals des de l'art contemporani., [EN] This doctoral thesis investigates the possibilities of collaborative art committed to socio-environmental defense through an interdisciplinary practice and methodology carried out between 2016 and 2022 by Bea Millón in different contexts of the Mexican territory. Through four series, he reformulates relations with the territory, activates critical, anti-colonial and ecological projects in dialogue with various bodily, material and environmental realities. These series, which come in multiple projects developed mainly in extractive contexts, are in turn investigations that produce other knowledge, sensibilities and strategies that feed back the fight for natural assets from contemporary art., La presente tesis doctoral recoge la labor plurianual de investigación teórico-práctica llevada a cabo dentro del programa de doctorado Arte: Producción e investigación de la Facultad de Bellas Artes de la Universitat Politècnica de València, con el apoyo del sistema de Formación de Profesorado Universitario de Doctorado FPU promovido por el Ministerio de Educación (FPU 2016).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A membrane computing simulator of trans-hierarchical antibiotic resistance evolution dynamics in nested ecological compartments (ARES)

  • Campos Frances, Marcelino
  • Sempere Luna, José María|||0000-0003-2393-9224
  • Llorens, Carlos
  • Futami, Ricardo
  • Rodríguez, Irene
  • Carrasco, Purificación
  • Capilla, Rafael
  • Latorre, Amparo
  • Coque, Teresa M.
  • Moya, Andrés
  • Baquero, Fernando
In this article, we introduce ARES (Antibiotic Resistance Evolution Simulator) a software device that simulates P-system model scenarios with five types of nested computing membranes oriented to emulate a hierarchy of eco-biological compartments, i.e. a) peripheral ecosystem; b) local environment; c) reservoir of supplies; d) animal host; and e) host's associated bacterial organisms (microbiome). Computational objects emulating molecular entities such as plasmids, antibiotic resistance genes, antimicrobials, and/or other substances can be introduced into this framework and may interact and evolve together with the membranes, according to a set of pre-established rules and specifications. ARES has been implemented as an online server and offers additional tools for storage and model editing and downstream analysis, This work has also been supported by grants BFU2012-39816-C02-01 (co-financed by FEDER funds and the Ministry of Economy and Competitiveness, Spain) to AL and Prometeo/2009/092 (Ministry of Education, Government of Valencia, Spain) and Explora Ciencia y Explora Tecnologia/SAF2013-49788-EXP (Spanish Ministry of Economy and Competitiveness) to AM. IRF is recipient of a "Sara Borrell" postdoctoral fellowship (Ref. CD12/00492) from the Ministry of Economy and Competitiveness (Spain). We are also grateful to the Spanish Network for the Study of Plasmids and Extrachromosomal Elements (REDEEX) for encouraging and funding cooperation among Spanish microbiologists working on the biology of mobile genetic elements (Spanish Ministry of Science and Innovation, reference number BFU2011-14145-E).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Three Birds with One Stone: Multifunctional Separators Based on SnSe Nanosheets Enable High-Performance Li-, Na- and K-Sulfur Batteries

  • Li, Canhuang
  • Yang, Dawei
  • Yu, Jing
  • Wang, Jian
  • Zhang, Chaoqi
  • Yang, Tianxiang
  • Huang, Chen
  • Nan, Bingfei
  • Li, Junshan
  • Arbiol, Jordi
  • Zhou, Yingtang
  • Zhang, Qiaobao
  • Cabot, Andreu
Alkali metal-sulfur batteries (MSBs) are one of the most promising next-generation energy storage technologies due to their high energy density and potential for low cost. They are nonetheless constrained by the sluggish conversion of metal polysulfides (MPS) during the charge/discharge process. Herein, a multifunctional separator able to trap the MPS and catalyze their conversion in the three main MSB chemistries, Li-, Na-, and K-MSBs, is demonstrated. More in detail, SnSe nanosheets are introduced as additive into the cathode side of the glass microfiber (GF) separator of the MSB. Taking lithium-sulfur batteries (LSBs) as an example, it is demonstrated that the GF-SnSe separator (GF@SnSe) shows strong chemical affinity to lithium polysulfides (LiPS) and superior catalytic activity, inhibiting the transport of LiPSs to the anode and accelerating their conversion. Combining experimental and calculation results, the SnSe additive is shown to decrease the Li2S decomposition energy barrier. Overall, GF@SnSe separators provide significantly improved LSB rate performance and cycling stability with a 0.049% capacity decay per cycle. Besides, the GF@SnSe separator promotes the electrochemical performance of sodium-sulfur and potassium-sulfur batteries. Overall, this work presents a significant advancement in the development of multifunctional separators in LSBs as well as the emerging Na-S and K-S systems., This work was financially supported by the SyDECat project from the Spanish MCIN/AEI/FEDER (PID2022-136883OB-C22) and the 2BOSS project of the ERA-MIN3 program with the Spanish grant number PCI2022-132985/AEI/10.13039/501100011033. The authors also thank the support from the projects NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe,” by the “European Union.” C.L., J.Y., C.Z., and B.N. thank the China Scholarship Council for the scholarship support. D.W. acknowledges funding from the National Natural Science Foundation of China (NSFC) (Grants No. 22305064). This work was financially supported by the National Natural Science Foundation of China (Grants Nos. 52122211, 52072323), the Frontier Exploration Projects of Longmen Laboratory (Grant No. LMQYTSKT008), Q.Z. acknowledge the support of Nanqiang Young Top-notch Talent Fellowship in Xiamen University. ICN2 acknowledges the support from the Severo Ochoa Programme (CEX2021-001214-S). IREC and ICN2 were both funded by the CERCA Program/Generalitat de Catalunya (2021SGR00457, 2021SGR01581). This project has received funding from the Advanced Materials program and was supported by MCIN with funding from the European Union Next Generation EU (PRTR-C17.I1)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Flexible and Binder-Free Iron Phosphide Electrodes Using a Three-Dimensional Support for High Hydrogen Productivity

  • Díez-García, María Isabel|||0000-0001-9939-8642
  • García Blanco, Andrés Alberto
  • Murcia López, Sebastián|||0000-0002-3703-041X
  • Botifoll, Marc|||0000-0002-4876-6393
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Qamar, Mohammad|||0000-0002-5351-9872
  • Morante, Joan Ramon|||0000-0002-4981-4633
In this work, an inexpensive and reliable microstructured electrode for the hydrogen evolution reaction (HER) is developed. This cathode is made of Earth-abundant elements consisting of iron phosphide as an electrocatalyst and carbon felt (CF) as a flexible conductive scaffold. Its porous character and binder-free FeP coverage over the carbon fibers generate a high number of accessible active sites for the reaction, achieving a high value of the electrochemically active surface area. The electrode reaches 100 mA ⋅ cm by applying only -53 mV vs RHE at 50 °C in 0.5 M HSO, demonstrating excellent electrocatalytic activity for the HER and outstanding stability in acidic electrolyte. Furthermore, the feasibility of these electrodes for industrial application is evaluated using a PEM electrolyzer. The developed prototype with a cathodic area of 1.8 cm shows a very promising performance, reaching 14.9 mmol H ⋅ h ⋅ cm (corresponding to 800 mA ⋅ cm) at a voltage of only 2.1 V.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

FeS2-Decorated Carbon NanoFiber as Solid Phase Conversion-Type Cathode for Li-S Batteries

  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Mazaira, Pedro
  • Avireddy, Hemesh
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Tang, PengYi|||0000-0002-2306-095X
  • Missyul, Alexander|||0000-0002-0577-4481
  • Trilla, Lluís
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
A new cathode material, FeS-decorated carbon nanofiber (CNF), is proposed for Li-S batteries. The structure and physicochemical properties of the material have been engineered to enhance the poor cycling stability typically displayed by sulfur composites. The composite material shows a complex architecture with a matrix of CNF hosting the sulfur and core-shell FeS nanoparticles acting as a catalyst for a solid phase conversion-type reaction. This cathode delivers high discharge capacities of 864, 798, 689, 595 and 455 mAhg at C/10, C/5, C/2, 1C and 2C, respectively, with a stable capacity retention of 87% at 2C after 300 cycles. FeS-decorated CNF has been characterised using several techniques, including in-situ battery measurements at the ALBA synchrotron facility and high-throughput microscopy, giving valuable insights into its charge/discharge reaction mechanism. The excellent performance obtained is combined with the use of just low-cost and abundant elements such as iron, sulfur and carbon, which makes this battery highly promising for the next generation of electrochemical energy storage devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Improvement of carbon dioxide electroreduction by crystal surface modification of ZIF-8

  • Zhang, Ting|||0000-0002-0317-9662
  • Liu, Hong|||0000-0003-3165-8764
  • Han, Xu|||0000-0001-8319-8830
  • Biset-Peiró, Martí|||0000-0002-1255-7733
  • Yang, Yunhui|||0000-0002-6007-2335
  • Imaz, Inhar|||0000-0002-0278-1141
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Yang, Bo|||0000-0001-6904-6646
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Metal-organic frameworks (MOFs) possess high CO adsorption properties and are considered to be a promising candidate for the electrochemical carbon dioxide reduction reaction (eCORR). However, their insufficient selectivity and current density constrain their further exploration in the eCORR. In this work, by introducing a very small proportion of 2,5-dihydroxyterephthalic acid (DOBDC) into ZIF-8, a surface modified ZIF-8-5% catalyst was synthesized by a post-modification method, exhibiting enhanced selectivity (from 56% to 79%) and current density (from -4 mA cm to -10 mA m) compared to ZIF-8. Density functional theory (DFT) calculations further demonstrate that the boosted eCORR performance on ZIF-8-5% could be attributed to the improved formation of the *COOH intermediate stemming from successful DOBDC surface modification. This work opens a new path for improving the catalytic properties of MOFs via their surface modification.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tubular C3N4 Nanotubes as Metal-Free Sulfur Hosts toward Stable Lithium-Sulfur Batteries

  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Du, Ruifeng
  • Martí-Sánchez, Sara|||0000-0003-4283-1489
  • Xiao, Ke
  • Yang, Dawei|||0000-0002-3842-8286
  • Zhang, Chao Yue
  • Li, Canhuang
  • Zeng, Guifang|||0000-0002-5927-4730
  • Chang, Xingqi|||0000-0002-2604-0233
  • He, Ren|||0000-0003-3712-5539
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Li, Junshan|||0000-0002-1482-1972
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Lithium-sulfur batteries (LSBs) with high energy density have the potential to replace current commercial lithium-ion batteries. However, the shuttle effect and the low conversion kinetics of lithium polysulfide (LiPS) remain the main challenges in the development of LSBs. In this study, a metal-free and simple-to-prepare carbon nitride with a high surface area and tubular morphology (CN-nt) is used as the sulfur host for LSBs. Due to its unique nanostructure and rich active sites, it not only effectively disperses the active sulfur material and anchors soluble polysulfide species, but it also promotes the nucleation process of LiS, thus achieving fast and sustainable Li-S redox reactions. Experimental results show that the obtained S@CN-nt electrodes exhibit a high sulfur utilization of 1296.2 mAh g at 0.1 C and a significant rate capability of 689.4 mAh g at the high current rate of 3C. More importantly, the capacity retention reaches 87.7% after 500 cycles. This simple strategy of engineering unique carbon-based nanostructured hosts can inspire new ideas for developing cost-effective and metal-free host materials for sulfur-based batteries.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A MOF-Based Spatial-Separation Layer to Enable a Uniform Favorable Microenvironment for Electrochemical CO2 Reduction

  • Han, Xu|||0000-0001-8319-8830
  • Biset-Peiró, Martí|||0000-0002-1255-7733
  • Zhao, Siqi
  • Murcia López, Sebastián|||0000-0002-3703-041X
  • Daasbjerg, Kim|||0000-0003-0212-8190
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Li, Jian
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Regulating the local microenvironment of active sites to increase their specific CO2 concentration and pH gradient, is a promising approach to optimize the electrochemical CO2 reduction reaction (eCO2RR). However, currently reported morphological strategies display an uncertainty to the compatibility and distribution between catalytic sites and their microenvironment. Here, a uniform spatial-separation metal-organic framework (MOF) layer between active sites and bulk electrolyte is proposed, which enables each active site to locate in a similarly favorable microenvironment. Zinc oxide (ZnO) nanorods (NR), a representative electrocatalyst for eCO2RR, is covered with a Zeolitic imidazolate framework-8 (ZIF-8) thin layer to serve as a model system. The prepared ZnO NR@ZIF-8 exhibits an enhanced Faradaic efficiency toward CO at a wide range of potentials and reaches a maximum FE of CO (85%) at -1.05 V versus reversible hydrogen electrode, which is one of the best records till date. Moreover, the hydrophobic ZIF-8 layer protects ZnO against self-reduction. Such performance benefits from the porous ZIF-8 shell with high CO2 affinity, realizing efficient CO2 access and retaining an increased local pH near ZnO active sites.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Prevalence of hepatitis E infection in HIV/HCV-coinfected patients in Spain (2012-2014)

  • Vázquez-Morón, Sonia|||0000-0002-0977-741X
  • Berenguer, Juan|||0000-0001-8541-8200
  • González García, Juan|||0000-0002-3652-002X
  • Jiménez-Sousa, Ma Ángeles
  • Canorea, Isabel
  • Guardiola Tey, Jose Maria|||0000-0001-5537-2600
  • Crespo Casal, Manuel|||0000-0001-9016-0515
  • Quereda, Carmen
  • Sanz, José
  • Carrero, Ana
  • Hontañón Antoñana, Víctor|||0000-0003-3070-2647
  • Avellón, Ana|||0000-0003-4425-6350
  • Resino, Salvador|||0000-0001-8783-0450
Hepatitis E virus (HEV) has emerged as a relevant pathogen for HIV-infected patients. However, there is scarce data on HEV infection in HIV/HCV-coinfected individuals with advanced fibrosis, which seems to increase the risk of HEV infection and worsen the prognosis of liver disease. We aimed to determine the prevalence of anti-HEV antibodies, acute hepatitis E, resolved hepatitis E, and exposure to HEV in HIV/HCV-coinfected patients and to evaluate associations with clinical and epidemiological characteristics. We performed a cross-sectional study on 198 HIV/HCV-coinfected patients, 30 healthy controls and 36 HIV-monoinfected patients. We found a low concordance between techniques used for detection of anti-HEV antibodies (ELISA versus Immunoblot), particularly in HIV/HCV-coinfected patients. HIV/HCV-coinfected patients showed the highest prevalence of IgG against HEV, resolved hepatitis E, and exposure to HEV (19.2%, 17.2%, and 22.2% respectively). However, we did not find any samples positive for HEV-RNA nor significant differences between groups. Moreover, HIV/HCV-coinfected patients with CD4 T-cells <350 cells/mm had higher prevalence for anti-HEV IgG antibodies, resolved hepatitis E, and exposure to HEV than healthy controls or those with CD4 T-cells ≥ 350 cells/mm (p = 0.034, p = 0.035, and p = 0.053; respectively). In conclusion, HIV/HCV-coinfected patients in Spain have a high prevalence for IgG anti-HEV antibodies, resolved hepatitis E, and exposure to HEV; particularly patients with CD4+T-cells <350 cells/mm.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Brookite TiO2 Nanorods as Promising Electrochromic and Energy Storage Materials for Smart Windows

  • Xing, Congcong|||0000-0001-7674-6720
  • Yang, Linlin|||0009-0006-9953-5698
  • He, Ren|||0000-0003-3712-5539
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Zhang, Yu|||0000-0002-0332-0013
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Li, Junshan|||0000-0002-1482-1972
  • Poudel, Bed|||0000-0001-7760-2016
  • Nozariasbmarz, Amin|||0000-0003-2789-9469
  • Li, Wenjie|||0000-0003-4509-3303
  • Lim, Khak Ho|||0000-0003-3116-8589
  • Liu, Yu|||0000-0001-7313-6740
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Electrochromic smart windows (ESWs) offer an attractive option for regulating indoor lighting conditions. Electrochromic materials based on ion insertion/desertion mechanisms also present the possibility for energy storage, thereby increasing overall energy efficiency and adding value to the system. However, current electrochromic electrodes suffer from performance degradation, long response time, and low coloration efficiency. This work aims to produce defect-engineered brookite titanium dioxide (TiO) nanorods (NRs) with different lengths and investigate their electrochromic performance as potential energy storage materials. The controllable synthesis of TiO NRs with inherent defects, along with smaller impedance and higher carrier concentrations, significantly enhances their electrochromic performance, including improved resistance to degradation, shorter response times, and enhanced coloration efficiency. The electrochromic performance of TiO NRs, particularly longer ones, is characterized by fast switching speeds (20 s for coloration and 12 s for bleaching), high coloration efficiency (84.96 cm C at a 600 nm wavelength), and good stability, highlighting their potential for advanced electrochromic smart window applications based on Li ion intercalation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Direct Operando Visualization of Metal Support Interactions Induced by Hydrogen Spillover During CO2 Hydrogenation

  • Jenkinson, Kellie|||0000-0002-1770-5678
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Golovanova, Viktoria|||0000-0002-4008-0733
  • Andreu, Teresa|||0000-0002-2804-4545
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Bals, Sara|||0000-0002-4249-8017
The understanding of catalyst active sites is a fundamental challenge for the future rational design of optimized and bespoke catalysts. For instance, the partial reduction of Ce surface sites to Ce and the formation of oxygen vacancies are critical for CO hydrogenation, CO oxidation, and the water gas shift reaction. Furthermore, metal nanoparticles, the reducible support, and metal support interactions are prone to evolve under reaction conditions; therefore a catalyst structure must be characterized under operando conditions to identify active states and deduce structure-activity relationships. In the present work, temperature-induced morphological and chemical changes in Ni nanoparticle-decorated mesoporous CeO by means of in situ quantitative multimode electron tomography and in situ heating electron energy loss spectroscopy, respectively, are investigated. Moreover, operando electron energy loss spectroscopy is employed using a windowed gas cell and reveals the role of Ni-induced hydrogen spillover on active Ce site formation and enhancement of the overall catalytic performance.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Cobalt-Iron Oxyhydroxide Obtained from the Metal Phosphide, A Highly Effective Electrocatalyst for the Oxygen Evolution Reaction at High Current Densities

  • Díez-García, María Isabel|||0000-0001-9939-8642
  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Botifoll, Marc|||0000-0002-4876-6393
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Qamar, Mohammad|||0000-0002-5351-9872
  • Morante, Joan Ramon|||0000-0002-4981-4633
The development of high current density anodes for the oxygen evolution reaction (OER) is fundamental to manufacturing practical and reliable electrochemical cells. In this work, we have developed a bimetallic electrocatalyst based on cobalt-iron oxyhydroxide that shows outstanding performance for water oxidation. Such a catalyst is obtained from cobalt-iron phosphide nanorods that serve as sacrificial structures for the formation of a bimetallic oxyhydroxide through phosphorous loss concomitantly to oxygen/hydroxide incorporation. CoFeP nanorods are synthesized using a scalable method using triphenyl phosphite as a phosphorous precursor. They are deposited without the use of binders on nickel foam to enable fast electron transport, a highly effective surface area, and a high density of active sites. The morphological and chemical transformation of the CoFeP nanoparticles is analyzed and compared with the monometallic cobalt phosphide in alkaline media and under anodic potentials. The resulting bimetallic electrode presents a Tafel slope as low as 42 mV dec and low overpotentials for OER. For the first time, an anion exchange membrane electrolysis device with an integrated CoFeP-based anode was tested at a high current density of 1 A cm, demonstrating excellent stability and Faradaic efficiency near 100%. This work opens up a way for using metal phosphide-based anodes for practical fuel electrosynthesis devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Enhanced Oxygen Evolution and Zinc-Air Battery Performance via Electronic Spin Modulation in Heterostructured Catalysts

  • Yang, Linlin|||0009-0006-9953-5698
  • He, Ren|||0000-0003-3712-5539
  • Botifoll, Marc|||0000-0002-4876-6393
  • Zhang, Yongcai|||0000-0003-1551-754X
  • Ding, Yang
  • Di, Chong
  • He, Chuansheng
  • Xu, Ying
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Beyond optimizing electronic energy levels, the modulation of the electronic spin configuration is an effective strategy, often overlooked, to boost activity and selectivity in a range of catalytic reactions, including the oxygen evolution reaction (OER). This electronic spin modulation is frequently accomplished using external magnetic fields, which makes it impractical for real applications. Herein, spin modulation is achieved by engineering Ni/MnFeO heterojunctions, whose surface is reconstructed into NiOOH/MnFeOOH during the OER. NiOOH/MnFeOOH shows a high spin state of Ni, which regulates the OH and O adsorption energy and enables spin alignment of oxygen intermediates. As a result, NiOOH/MnFeOOH electrocatalysts provide excellent OER performance with an overpotential of 261 mV at 10 mA cm. Besides, rechargeable zinc-air batteries based on Ni/MnFeO show a high open circuit potential of 1.56 V and excellent stability for more than 1000 cycles. This outstanding performance is rationalized using density functional theory calculations, which show that the optimal spin state of both Ni active sites and oxygen intermediates facilitates spin-selected charge transport, optimizes the reaction kinetics, and decreases the energy barrier to the evolution of oxygen. This study provides valuable insight into spin polarization modulation by heterojunctions enabling the design of next-generation OER catalysts with boosted performance.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Three Birds with One Stone, Multifunctional Separators Based on SnSe Nanosheets Enable High-Performance Li-, Na- and K-Sulfur Batteries

  • Li, Canhuang
  • Yang, Dawei|||0000-0002-3842-8286
  • Yu, Jing|||0000-0002-7620-745X
  • Wang, Jian
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Yang, Tianxiang
  • Huang, Chen
  • Nan, Bingfei|||0000-0002-7128-6056
  • Li, Junshan|||0000-0002-1482-1972
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Zhang, Qiaobao|||0000-0002-3584-5201
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Alkali metal-sulfur batteries (MSBs) are one of the most promising next-generation energy storage technologies due to their high energy density and potential for low cost. They are nonetheless constrained by the sluggish conversion of metal polysulfides (MPS) during the charge/discharge process. Herein, a multifunctional separator able to trap the MPS and catalyze their conversion in the three main MSB chemistries, Li-, Na-, and K-MSBs, is demonstrated. More in detail, SnSe nanosheets are introduced as additive into the cathode side of the glass microfiber (GF) separator of the MSB. Taking lithium-sulfur batteries (LSBs) as an example, it is demonstrated that the GF-SnSe separator (GF@SnSe) shows strong chemical affinity to lithium polysulfides (LiPS) and superior catalytic activity, inhibiting the transport of LiPSs to the anode and accelerating their conversion. Combining experimental and calculation results, the SnSe additive is shown to decrease the LiS decomposition energy barrier. Overall, GF@SnSe separators provide significantly improved LSB rate performance and cycling stability with a 0.049% capacity decay per cycle. Besides, the GF@SnSe separator promotes the electrochemical performance of sodium-sulfur and potassium-sulfur batteries. Overall, this work presents a significant advancement in the development of multifunctional separators in LSBs as well as the emerging Na-S and K-S systems.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tungsten phosphide on nitrogen and phosphorus-doped carbon as a functional membrane coating enabling robust lithium-sulfur batteries

  • Li, Canhuang
  • Yu, Jing|||0000-0002-7620-745X
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Yang, Dawei|||0000-0002-3842-8286
  • Wang, Jian
  • Li, Hao|||0000-0002-4740-5908
  • Huang, Chen
  • Xiao, Ke
  • Cheng, Yapeng|||0000-0002-9218-9095
  • Ren, Yuchuan|||0000-0002-6870-4149
  • Qi, Xuede|||0009-0008-5723-3629
  • Yang, Tianxiang
  • Li, Junshan|||0000-0002-1482-1972
  • Wang, Jiaao|||0000-0002-4944-4951
  • Henkelman, Graeme|||0000-0002-0336-7153
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Nan, Junmin
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Lithium-sulfur batteries (LSBs) hold great potential as future energy storage technology, but their widespread application is hampered by the slow polysulfide conversion kinetics and the sulfur loss during cycling. In this study, we detail a one-step approach to growing tungsten phosphide (WP) nanoparticles on the surface of nitrogen and phosphorus co-doped carbon nanosheets (WP@NPC). We further demonstrate that this material provides outstanding performance as a multifunctional separator in LSBs, enabling higher sulfur utilization and exceptional rate performance. These excellent properties are associated with the abundance of lithium polysulfide (LiPS) adsorption and catalytic conversion sites and rapid ion transport capabilities. Experimental data and density functional theory calculations demonstrate tungsten to have a sulfophilic character while nitrogen and phosphorus provide lithiophilic sites that prevent the loss of LiPSs. Furthermore, WP regulates the LiPS catalytic conversion, accelerating the Li-S redox kinetics. As a result, LSBs containing a polypropylene separator coated with a WP@NPC layer show capacities close to 1500 mAh/g at 0.1C and coulombic efficiencies above 99.5 % at 3C. Batteries with high sulfur loading, 4.9 mg cm, are further produced to validate their superior cycling stability. Overall, this work demonstrates the use of multifunctional separators as an effective strategy to promote LSB performance.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Electronic Spin Alignment within Homologous NiS2/NiSe2 Heterostructures to Promote Sulfur Redox Kinetics in Lithium-Sulfur Batteries

  • Huang, Chen
  • Yu, Jing|||0000-0002-7620-745X
  • Zhang, Chao Yue
  • Cui, Zhibiao
  • Chen, Jiakun
  • Lai, Wei-Hong
  • Lei, Yao-Jie
  • Nan, Bingfei|||0000-0002-7128-6056
  • Lu, Xuan|||0000-0003-2453-2805
  • He, Ren|||0000-0003-3712-5539
  • Gong, Li
  • Li, Junshan|||0000-0002-1482-1972
  • Li, Canhuang
  • Qi, Xuede|||0009-0008-5723-3629
  • Xue, Qian
  • Zhou, Jin Yuan
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The catalytic activation of the Li-S reaction is fundamental to maximize the capacity and stability of Li-S batteries (LSBs). Current research on Li-S catalysts mainly focuses on optimizing the energy levels to promote adsorption and catalytic conversion, while frequently overlooking the electronic spin state influence on charge transfer and orbital interactions. Here, hollow NiS/NiSe heterostructures encapsulated in a nitrogen-doped carbon matrix (NiS/NiSe@NC) are synthesized and used as a catalytic additive in sulfur cathodes. The NiS/NiSe heterostructure promotes the spin splitting of the 3d orbital, driving the Ni transformation from low to high spin. This high spin configuration raises the electronic energy level and activates the electronic state. This accelerates the charge transfer and optimizes the adsorption energy, lowering the reaction energy barrier of the polysulfides conversion. Benefiting from these characteristics, LSBs based on NiS/NiSe@NC/S cathodes exhibit high initial capacity (1458 mAh·g⁻ at 0.1C), excellent rate capability (572 mAh·g⁻ at 5C), and stable cycling with an average capacity decay rate of only 0.025% per cycle at 1C during 500 cycles. Even at high sulfur loadings (6.2 mg·cm⁻), high initial capacities of 1173 mAh·g⁻ (7.27 mAh·cm⁻) are measured at 0.1C, and 1058 mAh·g⁻ is retained after 300 cycles.