Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 90
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

"Men don't feel comfortable with successful female leaders", exploring participatory exclusion in community-based fisheries management, South Coast of Kenya

  • Chambon, Mouna|||0000-0002-2260-5145
  • Wambiji, Nina|||0000-0002-7775-5300
  • Wandiga, Joe Ngunu
  • Reyes-García, Victoria|||0000-0002-2914-8055
  • Ziveri, Patrizia|||0000-0002-5576-0301
While community-based fisheries management (CBFM) is promoted as a promising approach to achieving sustainable fisheries management, its inclusiveness is increasingly questioned in the literature. Studies that explore the inclusion of gender along other intersectional social identities in CBFM are scarce. This research gap may limit a comprehensive understanding of power dynamics in fisheries settings, while reinforcing exclusive approaches in fisheries governance. In this study, we draw on literature on participatory exclusion, intersectionality and lived experiences, to examine gender-inclusiveness in CBFM through a case study on the South Coast of Kenya. We applied qualitative data collection methods, combining participant observation, semi-structured interviews (n=18), focus group discussions (n=6) and relief maps (n= 32). Our findings indicate that women's participation in CBFM is limited and systematically lower than men's participation. Barriers to women's participation in CBFM are complex and interlaced, including socio-cultural, economic, and institutional barriers, and specific restrictions to women's access to leadership. In addition, our findings highlight the intersected nature of lived experiences related to CBFM places and suggest that CBFM may sustain and reinforce social inequalities in fishing communities. Overall, our results tend to confirm the relevance of the participatory exclusion concept to CBFM in coastal Kenya. Our study demonstrates the importance of applying an intersectional framework to study the complexity of power relationships in CBFM contexts, as well as fisheries management and governance. We conclude by providing key recommendations towards inclusive management approaches in fisheries settings.
Repisalud
Publication Artículo científico (JournalArticle)

Modifications in host cell cytoskeleton structure and function mediated by intracellular HIV-1 Tat protein are greatly dependent on the second coding exon

  • Lopez-Huertas, Maria Rosa
  • Callejas, S.
  • Abia, David
  • Mateos, Elena
  • Dopazo, A.
  • Alcamí, José
  • Coiras, Mayte
The human immunodeficiency virus type 1 (HIV-1) regulator Tat is essential for viral replication because it achieves complete elongation of viral transcripts. Tat can be released to the extracellular space and taken up by adjacent cells, exerting profound cytoskeleton rearrangements that lead to apoptosis. In contrast, intracellular Tat has been described as protector from apoptosis. Tat gene is composed by two coding exons that yield a protein of 101 amino acids (aa). First exon (1-72aa) is sufficient for viral transcript elongation and second exon (73-101 aa) appears to contribute to non-transcriptional functions. We observed that Jurkat cells stably expressing intracellular Tat101 showed gene expression deregulation 4-fold higher than cells expressing Tat72. Functional experiments were performed to evaluate the effect of this deregulation. First, NF-kappaB-, NF-AT- and Sp1-dependent transcriptional activities were greatly enhanced in Jurkat-Tat101, whereas Tat72 induced milder but efficient activation. Second, cytoskeleton-related functions as cell morphology, proliferation, chemotaxis, polarization and actin polymerization were deeply altered in Jurkat-Tat101, but not in Jurkat-Tat72. Finally, expression of several cell surface receptors was dramatically impaired by intracellular Tat101 but not by Tat72. Consequently, these modifications were greatly dependent on Tat second exon and they could be related to the anergy observed in HIV-1-infected T cells.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Capítulo o parte de un libro (BookPart)

Mejora de la motivación hacia la didáctica de la matemática y desarrollo de la competencia docente de los estudiantes para maestro a partir de una experiencia de m-learning

  • Muñiz-Rodríguez, Laura
  • Lorenzo-Fernández, Esther
  • Aguilar-González, Álvaro
[EN] Learning using mobile devices or m-learning is gaining predominance at all educational levels due to its ability to make learning accessible to a wider audience and to its motivational nature, among other reasons. Bringing this learning methodology closer to higher education is essential, especially among those being trained to become a teacher. In turn, the use of educational videos as a teaching resource is increasing at a remarkable rate. Aware of the potential derived from the synergy between this methodology and this teaching resource, this study presents an experience based on learning with mobile devices or m-learning for the design of educational videos about manipulatives for teaching mathematics by primary education student teachers. The results obtained from a questionnaire show a positive influence of the experience on the motivation of primary education student teachers towards the teaching and learning of mathematics and in the development of their teaching competence., [ES] El aprendizaje con dispositivos móviles o m-learning está ganando predominancia en todas las etapas educativas debido, entre otras razones, a su capacidad para hacer el aprendizaje accesible a una mayor audiencia y a su carácter motivacional. Acercar esta metodología de aprendizaje a la educación superior es fundamental, máxime entre aquellos que se están formando para desempeñar una futura labor docente. A su vez, el uso de vídeos educativos como recurso didáctico está aumentando a un ritmo notable. Conscientes del potencial derivado de la sinergia entre esta metodología y este recurso didáctico, en este trabajo se presenta una experiencia basada en el aprendizaje con dispositivos móviles o m-learning para la elaboración de vídeos educativos sobre materiales manipulativos para la enseñanza de contenidos matemáticos por estudiantes para maestro. Los resultados obtenidos a partir de un cuestionario muestran un efecto positivo de la experiencia en la motivación de los estudiantes para maestro hacia la didáctica de la matemática y en el desarrollo de su competencia docente., Este trabajo se ha realizado en el marco de los Proyectos de Innovación Docente de la Universidad de Oviedo PINN-18-A-0022, PINN-20-A-055 y PINN-20-A-074, y del Proyecto TIN2017-87600-P del Ministerio de Ciencia e Innovación de España. Los autores quieren agradecer a todos los estudiantes para maestro que colaboraron en la experiencia y respondieron al cuestionario.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Short-Time Estimation of Fractionation in Atrial Fibrillation with Coarse-Grained Correlation Dimension for Mapping the Atrial Substrate

  • Vraka, Aikaterini
  • Hornero, Fernando
  • Bertomeu-Gonzalez, Vicente
  • Osca, Joaquin
  • Alcaraz, Raul
  • Rieta, J J|||0000-0002-3364-6380
[EN] Atrial ¿brillation (AF) is currently the most common cardiac arrhythmia, with catheter ablation (CA) of the pulmonary veins (PV) being its ¿rst line therapy. Ablation of complex fractionated atrial electrograms (CFAEs) outside the PVs has demonstrated improved long-term results, but their identi¿cation requires a reliable electrogram (EGM) fractionation estimator. This study proposes a technique aimed to assist CA procedures under real-time settings. The method has been tested on three groups of recordings: Group 1 consisted of 24 highly representative EGMs, eight of each belonging to a different AF Type. Group 2 contained the entire dataset of 119 EGMs, whereas Group 3 contained 20 pseudo-real EGMs of the special Type IV AF. Coarse-grained correlation dimension (CGCD) was computed at epochs of 1 s duration, obtaining a classi¿cation accuracy of 100% in Group 1 and 84.0¿85.7% in Group 2, using 10-fold cross-validation. The receiver operating characteristics (ROC) analysis for highly fractionated EGMs, showed 100% speci¿city and sensitivity in Group 1 and 87.5% speci¿city and 93.6% sensitivity in Group 2. In addition, 100% of the pseudo-real EGMs were correctly identi¿ed as Type IV AF. This method can consistently express the fractionation level of AF EGMs and provides better performance than previous works. Its ability to compute fractionation in short-time can agilely detect sudden changes of AF Types and could be used for mapping the atrial substrate, thus assisting CA procedures under real-time settings for atrial substrate modi¿cation., This research has been supported by grants DPI2017-83952-C3 from MINECO/AEI/FEDER EU, SBPLY/17/180501/000411 from JCCM and AICO/2019/036 from GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Non-Covalent Interactions on Polymer-Graphene Nanocomposites and Their Effects on the Electrical Conductivity

  • Apátiga, Jorge Luis
  • del Castillo, Roxana Mitzayé
  • del Castillo, Luis Felipe
  • Calles, Alipio G.
  • Espejel-Morales, Raúl
  • Favela, José F.
  • Compañ Moreno, Vicente|||0000-0001-8233-7472
[EN] It is well known that a small number of graphene nanoparticles embedded in polymers enhance the electrical conductivity; the polymer changes from being an insulator to a conductor. The graphene nanoparticles induce several quantum effects, non-covalent interactions, so the percolation threshold is accelerated. We studied five of the most widely used polymers embedded with graphene nanoparticles: polystyrene, polyethylene-terephthalate, polyether-ketone, polypropylene, and polyurethane. The polymers with aromatic rings are affected mainly by the graphene nanoparticles due to the pi-pi stacking, and the long-range terms of the dispersion corrections are predominant. The polymers with linear structure have a CH-pi stacking, and the short-range terms of the dispersion corrections are the important ones. We used the action radius as a measuring tool to quantify the non-covalent interactions. This action radius was the main parameter used in the Monte-Carlo simulation to obtain the conductivity at room temperature (300 K). The action radius was the key tool to describe how the percolation transition works from the fundamental quantum levels and connect the microscopic study with macroscopic properties. In the Monte-Carlo simulation, it was observed that the non-covalent interactions affect the electronic transmission, inducing a higher mean-free path that promotes the efficiency in the transmission., This research was funded by DGTIC-UNAM, with access to the Miztli-UNAM supercomputer, with the project LANCAD-UNAM-DGTIC-055 and LANCAD-UNAM-DGTIC-385. This work was supported by UNAM-PAPIIT project IN120120.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhancement of sound in chirped sonic crystals

  • Romero-García, Vicente|||0000-0002-3798-6454
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • Staliünas, Kestutis
We propose and experimentally demonstrate a mechanism of sound wave concentration based on soft reflections in chirped sonic crystals. The reported controlled field enhancement occurs at around particular (bright) planes in the crystal and is related to a progressive slowing down of the sound wave as it propagates along the material. At these bright planes, a substantial concentration of the energy (with a local increase up to 20 times) was obtained for a linear chirp and for frequencies around the first band gap. A simple couple mode theory is proposed that interprets and estimates the observed effects. Wave concentration energy can be applied to increase the efficiency of detectors and absorbers., The work was supported by Spanish Ministry of Science and Innovation and European Union FEDER through projects FIS2011-29734-C02-01 and -02 and GVA/2011/055. V. R.-G. is grateful for the support of post-doctoral contracts of the UPV CEI-01-11. K. S. acknowledges the grant of UPV PAID-02-01. We acknowledge the CTFAMA and the Sonic Crystal Technologies Research Group at UPV for the use of the anechoic chamber and the 3DReAMS, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

NIN-like protein7 and PROTEOLYSIS6 functional interaction enhances tolerance to sucrose, ABA, and submergence

  • Castillo López Del Toro, Mª Cruz
  • León, José|||0000-0002-7332-1572
  • Costa-Broseta, Álvaro
  • Gayubas, Beatriz
[EN] Nitrate (NO3) assimilation and signaling regulate plant growth through the relevant function of the transcription factor NIN-like Protein7 (NLP7). NO3 is also the main source for plants to produce nitric oxide (NO), which regulates growth and stress responses. NO-mediated regulation requires efficient sensing via the PROTEOLYSIS6 (PRT6)-mediated proteasome-triggered degradation of group VII of ethylene response transcription factors through the Cys/Arg N-degron pathway. The convergence of NO3 signaling and N-degron proteolysis on NO-mediated regulation remains largely unknown. Here, we investigated the functional interaction between NLP7 and PRT6 using Arabidopsis (Arabidopsis thaliana) double prt6 nlp7 mutant plants as well as complementation lines overexpressing NLP7 in different mutant genetic backgrounds. prt6 nlp7 mutant plants displayed several potentiated prt6 characteristic phenotypes, including slower vegetative growth, increased NO content, and diminished tolerance to abiotic stresses such as high-sucrose concentration, abscisic acid, and hypoxia-reoxygenation. Although NLP7 has an N-terminus that could be targeted by the N-degron proteolytic pathway, it was not a PRT6 substrate. The potential PRT6- and NO-regulated nucleocytoplasmic translocation of NLP7, which is likely modulated by posttranslational modifications, is proposed to act as a regulatory loop to control NO homeostasis and action., This work was supported by MINECO from Spain grant (BIO2017-82945-P), CSIC (2020AEP055), Generalitat Valenciana (PROMETEO/2019/021 grant), and FEDER funds from European Union.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Data Acquisition System for the Characterization of Biomechanical and Ergonomic Thresholds in Driving Vehicles

  • Dols Ruiz, Juan Francisco|||0000-0003-1815-1360
  • Girbés, Vicent
  • Luna, Álvaro
  • Catalán, Javier
[EN] Directive (EU) 2015/653 on driving licenses has involved the modification of different codes that must appear on driver's licenses. The definition of specific codes (20.07 and 40.01) compels measurement of the braking and steering forces. Performing practical tests to assess the driving fitness of special drivers will help to determine the maximum force that a driver can apply on primary controls when driving. From that point, definition of car control adaptations required to supply their functional deficiencies can be stated. This article describes a data acquisition system designed and developed for obtaining data from experimental tests based on the execution of habitual driving manoeuvres (braking, lane change and roundabouts). The data gathered will allow for definition of the thresholds of biomechanical values (forces on the steering wheel and brake pedal) and ergonomic values (driver's upper extremity mobility ranges) necessary for driving motor vehicles. The results have shown that application in real driving tests of the data acquisition system designed provides valid and suitable results for the case studied. Therefore, it will contribute to substantially improving the assessment procedure for drivers in general and for disabled people in particular when obtaining or renewing their driving licenses., This research was funded by Generalitat Valenciana (Spain) under grant APOSTD/2017/055 and by the Universitat Politecnica de Valencia (UPV) (Spain) under the project Characterization of biomechanical and ergonomic thresholds in driving motor vehicles applicable to driver evaluation (Ref. 20190480). This research has been approved by the UPV Ethical Committee at a session celebrated on 18 June 2019 (ref. P5_18_06_19).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sound diffusers based on sonic crystals

  • Redondo, Javier|||0000-0002-5507-7799
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • Woszczyk, Wieslaw
A sound diffuser is proposed based on sonic crystals, structures formed by a periodic distribution of cylindrical scatterers in a host medium, which is usually air. The diffuser is a so-called biperiodic structure, as formed by two arrays of sonic crystals with slightly different periodicities. Large diffusivity at low frequencies is achieved when the typical scale of the blocks is much larger than the periodicity of the crystals, determined by its lattice constant. An interpretation of the low frequency behavior of the diffuser is given in the homogenization limit in terms of multiple reflections and interference between the fields scattered by the different blocks. It is also shown that sonic crystal based diffusers enhance time spreading in comparison with other conventional diffusers., We acknowledge fruitful discussions with George Massenburg and Brett Leonard at McGill University, and Martin Pilchner of Pilchner-Schoustal International in Toronto. This work was financially supported by the Spanish Ministerio de Economia y Competitividad through Project FIS2011-29731-C02-02 and by Generalitat Valenciana through GV/2011/055.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Human-robot cooperation for robust surface treatment using non-conventional sliding mode control

  • Solanes, J. Ernesto|||0000-0001-5011-4872
  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Muñoz-Benavent, Pau|||0000-0003-4681-183X
  • Tornero Montserrat, Josep|||0000-0003-1571-0251
  • Valls Miro, Jaime
  • Girbés, Vicent
[EN] This work presents a human-robot closely collaborative solution to cooperatively perform surface treatment tasks such as polishing, grinding, deburring, etc. The method considers two force sensors attached to the manipulator end-effector and tool: one sensor is used to properly accomplish the surface treatment task, while the second one is used by the operator to guide the robot tool. The proposed scheme is based on task priority and adaptive non-conventional sliding mode control. The applicability of the proposed approach is substantiated by experimental results using a redundant 7R manipulator: the Sawyer cobot., This work was supported in part by the Spanish Government under the project DPI2017-87656-C2-1-R and the Generalitat Valenciana under Grants VALi + d APOSTD/2016/044 and APOSTD/2017/055.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design and Experimental Validation of the Temperature Control of a PEMFC Stack by Applying Multiobjective Optimization

  • Navarro-Giménez, Santiago
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Blasco, Xavier|||0000-0002-9737-2833
  • Simarro Fernández, Raúl|||0000-0002-7311-2025
[EN] The current environmental challenges require the implementation of environmentally friendly energy production systems. In this context, proton exchange membrane fuel cell stacks (PEMFC) represent, due to their high electrical efficiency and their low level of CO2 emissions, a promising alternative technology. However, there are still many technical aspects that need to be improved before they become a commercial reality. One of them is the temperature control of the stack, since its electrical efficiency and its lifetime depend on the performance of this control. In this work, we design a multiloop PID control of the temperature of a PEMFC stack and validate it experimentally. The stack is the prime mover of a micro combined heat and power system (micro-CHP). For this task, we use a previously developed nonlinear model and apply a multiobjective optimization methodology. To assess its performance, the PID control is compared to a second PID control designed with a linearized model. The results show, on the one hand, the importance of having a nonlinear model valid in a wide operation range for the correct design of the temperature control of a PEMFC stack and, on the other hand, the advantages of applying a multiobjective optimization methodology to this problem., This work was supported in part by the Spanish Ministry of Science, Innovation, and Universities under Grant RTI2018-096904-B-I00, and in part by the Generalitat Valenciana Regional Government under Project AICO/2019/055.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Les construccions convencionalitzades en els casos clínics, Conventionalized constructions in clinical case reports

  • Kotátková, Adéla
[CA] Els casos clínics (CC) constitueixen un gènere propi dels professionals sanitaris, caracteritzat per l’ús d’una terminologia i d’unes abreviacions específiques que encaixen amb els propòsits comunicatius del gènere i de la comunitat de pràctica. Juntament amb aquests recursos, hi podem trobar determinades construccions que no necessàriament contenen mots especialitzats, però que també caracteritzen aquest gènere. Es tracta d’estructures que se solen repetir amb unes formes idèntiques o molt similars en nombrosos CC i amb un mateix objectiu. Identifiquem aquestes construccions convencionalitzades aplicant un programari de gestió de corpus i d’anàlisi de textos a 115 casos clínics en català, castellà i anglès sobre afeccions mentals, provinents dels àmbits de la neurologia, la psiquiatria i la psicologia. En presentem les més destacades i les relacionem amb quatre de les mogudes retòriques analitzades per Helán: la justificació del cas; la presentació del cas; la presentació del pacient quant a la raó de la consulta o l’ingrés; la investigació del problema., [EN] The clinical case report (CCR) is a genre specific of healthcare professionals. It is characterized by the usage of specialized terminology and abbreviations that match the communicative purposes of the genre and the community of practice. Along with these resources, we find certain constructions that not necessarily contain specialized words, but that also characterize this genre. These structures are repeated with identical or similar forms in many CCR and with the same goals. We identify these conventionalized constructions applying a corpus browser to 115 CCR in Catalan, Spanish and English on mental disorders, from the fields of neurology, psychiatry and psychology. We present the most prominent ones and relate them to four of the rhetorical moves analysed by Helán: justification of the case; case presentation; presentation of the patient regarding the reason of admission; investigation of the problem., Aquest treball s’ha realitzat en el marc del projecte de recerca “La construcció discursiva del conflicte: territorialitat, imatge de la malaltia i identitats de gènere en la literatura i en la comunicació social” (FFI2017-85227-R), del Ministeri d’Economia, Indústria i Competitivitat, Govern d’Espanya. L’autora ha rebut finançament a través del programa Grisolía (GRISOLIA/2016/055), de la Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Comparison of Archiving Strategies for Characterization of Nearly Optimal Solutions under Multi-Objective Optimization

  • Pajares-Ferrando, Alberto|||0000-0002-2036-2709
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
[EN] In a multi-objective optimization problem, in addition to optimal solutions, multimodal and/or nearly optimal alternatives can also provide additional useful information for the decision maker. However, obtaining all nearly optimal solutions entails an excessive number of alternatives. Therefore, to consider the nearly optimal solutions, it is convenient to obtain a reduced set, putting the focus on the potentially useful alternatives. These solutions are the alternatives that are close to the optimal solutions in objective space, but which differ significantly in the decision space. To characterize this set, it is essential to simultaneously analyze the decision and objective spaces. One of the crucial points in an evolutionary multi-objective optimization algorithm is the archiving strategy. This is in charge of keeping the solution set, called the archive, updated during the optimization process. The motivation of this work is to analyze the three existing archiving strategies proposed in the literature (ArchiveUpdateP(Q,epsilon)D(xy), Archive_nevMOGA, and targetSelect) that aim to characterize the potentially useful solutions. The archivers are evaluated on two benchmarks and in a real engineering example. The contribution clearly shows the main differences between the three archivers. This analysis is useful for the design of evolutionary algorithms that consider nearly optimal solutions., This work was supported in part by the Ministerio de Ciencia, Innovacion y Universidades (Spain) (grant number RTI2018-096904-B-I00), by the Generalitat Valenciana regional government through project AICO/2019/055 and by the Universitat Politecnica de Valencia (grant number SP20200109).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Composted organic wastes from the pharmaceutical and agro-food industries induce soil bioactivity and nodulation in alfalfa

  • Fornes Sebastiá, Fernando|||0000-0002-2835-5482
  • Belda Navarro, Rosa María|||0000-0001-7673-6207
  • Lidón, Antonio|||0000-0002-0455-4348
  • Jaramillo, Claudia X.
  • García de la Fuente, Rosana
BACKGROUND: Environmentally friendly agriculture needs toreduce the use of synthetic fertilizers and to reclaim nutrients from organic wastes. In this study the effect of five doses (0, 12, 24, 48 and 96 t ha(-1)) of two two-phase olive mill waste (TPOMW)-based composts on the bioactivity and chemical characteristics of an agricultural soil and their potential to fertilize alfalfa (Medicago sativa) and stimulate nodulation were assessed during a two-year incubation experiment. The two composts were prepared either with the olive mill waste alone (compost A), which served as control, or mixed with a liquid fatty-proteinaceous hydrolyzate waste (FPH) from the pharmaceutical industry (compost AH). RESULTS: Compost AH resulted in greater N immobilization than compost A because the former supplied the soil with easily degradable C and N, which increased microbial biomass and activity. Both compost mineralizations during the first year of incubation supplied the soil with more nutrients (mainly N), more so with A than with AH. Nevertheless, plant growth was similar in soils amended with either A or AH. Both composts induced nodulation similarly and the highest dose (96 t ha-1) increased the formation of nodules by a factor of 11 compared with the four lower doses. CONCLUSION: TPOMW serves as an effective ground material for co-composting with liquid wastes such as FPH. TPOMW supplies key nutrients and stimulates nodulation in alfalfa. (C) 2014 Society of Chemical Industry, This research was funded by the Spanish Ministerio de Educacion y Ciencia through the PETRI Programme (PTR1995-0894-OP-02-02). Rosana Garcia-de-la-Fuente thanks the Valencian Government for awarding her a pre-doctoral grant (BFPI/2007/055) and Profs Paolo Nanipieri, Loretta Landi and Giancarlo Renella from the Universita degli Studi de Firenze for their assistance in developing the N dynamics experiment. Claudia X Jaramillo thanks COOPEN European Commission for awarding her an exchange grant (2009-5124\001-001-ECW). The authors also thank Dr Debra Westall for revising the English and Mrs Joana Oliver for her technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Streaming Neural Speech Translation

  • Iranzo Sánchez, Javier
[ES] Gracias a avances significativos en aprendizaje profundo, la traducción del habla (ST) se ha convertido en un campo consolidado, lo que permite la utilización de la tecnología ST en soluciones para entornos de producción. Como consecuencia del aumento constante del número de horas de contenido audiovisual generado cada año, así como una mayor sensibilización sobre la importancia de la accesibilidad, la ST está preparada para convertirse en un elemento clave para la producción de contenidos audiovisuales, tanto de ocio como educativos. A pesar de que se ha progresado significativamente en ST, la mayor parte de la investigación se ha centrado en el escenario en diferido (offline), en el cual todo el audio de entrada está disponible. En cambio, la ST en directo (online) es una temática en la que falta mucho por investigar. En concreto, existe un caso de traducción en directo, la traducción continua (streaming), que traduce un flujo continuo de palabras en tiempo real y bajo unas estrictas condiciones de latencia. Este es un problema mucho más realista, que es necesario resolver para que sea posible aplicar la ST a una variedad de tareas de la vida real. Esta tesis está centrada en investigar y desarrollar las técnicas claves que son necesarias para una solución de ST continua. En primer lugar, de cara a permitir el desarrollo y la evaluación de sistemas de ST, se ha recopilado un nuevo conjunto de datos para ST multilingüe, que expande significativamente el número de horas disponibles para ST. A continuación se ha desarrollado un segmentador preparado para la condición continua, que se utiliza para segmentar las transcripciones intermedias de nuestra solución por etapas, que consiste en un sistema de reconocimiento automático del habla (ASR), seguido de un sistema de traducción automática (MT) encargado de traducir las transcripciones intermedias al idioma de destino elegido. Diversas investigaciones han concluido que la calidad de la segmentación es un factor muy influyente es la calidad del sistema MT, por lo que el desarrollo de un segmentador efectivo es un paso fundamental en el proceso de ST continua. Este segmentador se ha integrado en la solución por etapas, y estas se optimizan de manera conjunta para alcanzar el equilibrio óptimo entre calidad y latencia. La ST continua tiene unas restricciones de latencia mucho más estrictas que la ST en directo, ya que el nivel deseado de latencia tiene que mantenerse durante todo el proceso de traducción. Por tanto, es crucial ser capaz de medir de manera precisa esta latencia, pero las métricas estándar de ST en directo no se adaptan bien a esta tarea. Como consecuencia de esto, se proponen nuevos métodos para la evaluación de ST continua, que garantizan unos resultados precisos a la vez que interpretables. Por último, se presenta un nuevo método para mejorar la calidad de la traducción continua mediante el uso de información contextual. Mientras que los sistemas tradicionales de ST en directo traducen audios de manera aislada, existe abundante información contextual que está disponible para mejorar los sistemas de ST continua. Nuestra propuesta introduce el concepto de historia continua, que consiste en el almacenamiento de la información más reciente del proceso de traducción, que se utiliza más adelante por el modelo para mejorar la calidad de la traducción., [CA] Gràcies a avanços significatius en aprenentatge profund, la traducció de la parla (ST) s'ha convertit en un camp consolidat, la qual cosa permet la utilització de la tecnologia ST en solucions per a entorns de producció. A conseqüència de l'augment constant del nombre d'hores de contingut audiovisual generat cada any, així com una major sensibilització sobre la importància de l'accessibilitat, la ST està preparada per a convertir-se en un element clau per a la producció de continguts audiovisuals, tant d'oci com educatius. A pesar que s'ha progressat significativament en ST, la major part de la recerca s'ha centrat en l'escenari en diferit, en el qual tot l'àudio d'entrada està disponible. En canvi, la ST en directe és una temàtica en la qual falta molt per investigar. En concret, existeix un cas de traducció en directe, la traducció contínua, que tradueix un flux continu de paraules en temps real i sota unes estrictes condicions de latència. Aquest és un problema molt més realista, que és necessari resoldre perquè sigui possible aplicar la ST a una varietat de tasques de la vida real. Aquesta tesi està centrada en investigar i desenvolupar les tècniques claus que són necessàries per a una solució de ST contínua. En primer lloc, de cara a permetre el desenvolupament i l'avaluació de sistemes de ST, s'ha recopilat un nou conjunt de dades per a ST multilingüe, que expandeix significativament la quantitat de dades disponibles per a ST. A continuació s'ha desenvolupat un segmentador preparat per a la condició contínua, que s'utilitza per a segmentar les transcripcions intermèdies de la nostra solució per etapes, que consisteix en un sistema de reconeixement automàtic de la parla (ASR), seguit d'un sistema de traducció automàtica (MT) encarregat de traduir les transcripcions intermèdies a l'idioma de destí triat. Diveros treballs de recerca han conclòs que la qualitat de la segmentació és un factor molt important en la qualitat del sistema MT, per la qual cosa el desenvolupament d'un segmentador efectiu és un pas fonamental en el procés de ST contínua. Aquest segmentador s'ha integrat en la solució per etapes, i aquestes s'optimitzen de manera conjunta per a aconseguir l'equilibri òptim entre qualitat i latència. La ST contínua té unes restriccions de latència molt més estrictes que la ST en directe, ja que el nivell desitjat de latència ha de mantindre's durant tot el procés de traducció. Per tant, és crucial ser capaç de mesurar de manera precisa aquesta latència, però les mètriques estàndard de ST en directe no s'adapten bé a aquesta tasca. A conseqüència d'això, es proposen nous mètodes per a l'avaluació de ST contínua, que garanteixen uns resultats precisos alhora que interpretables. Finalment, es presenta un nou mètode per a millorar la qualitat de la traducció contínua mitjançant l'ús d'informació contextual. Mentre que els sistemes tradicionals de ST en directe tradueixen àudios de manera aïllada, existeix abundant informació contextual que està disponible per a millorar els sistemes de ST contínua. La nostra proposta introdueix el concepte d'història contínua, que consisteix en l'emmagatzematge de la informació més recent del procés de traducció, que s'utilitza més endavant pel model per a millorar la qualitat de la traducció., [EN] Thanks to significant advances in Deep Learning, Speech Translation (ST) has become a mature field that enables the use of ST technology in production-ready solutions. Due to the ever-increasing hours of audio-visual content produced each year, as well as higher awareness of the importance of media accessibility, ST is poised to become a key element for the production of entertainment and educational media. Although significant advances have been made in ST, most research has focused on the offline scenario, where the entire input audio is available. In contrast, online ST remains an under-researched topic. A special case of online ST, streaming ST, translates an unbounded input stream in a real-time fashion under strict latency constraints. This is a much more realistic problem that needs to be solved in order to apply ST to a variety of real-life tasks. The focus of this thesis is on researching and developing key techniques necessary for a successful streaming ST solution. First, in order to enable ST system development and evaluation, a new multilingual ST dataset is collected, which significantly expands the amount of hours available for ST. Then, a streaming-ready segmenter component is developed to segment the intermediate transcriptions of our proposed cascade solution, which consists in an Automatic Speech Recognition (ASR) system that transcribes the audio, followed by a Machine Translation (MT) system that translates the intermediate transcriptions into the desired language. Research has shown that segmentation quality plays a significant role in downstream MT performance, so the development of an effective streaming segmenter is a critical step in the streaming ST process. This segmenter is then integrated and the components of the cascade are jointly optimized to achieve an appropriate quality-latency trade-off. Streaming ST has much more strict latency constraints than standard online ST, as the desired latency level must be maintained during the whole translation process. Therefore, it is crucial to be able to accurately measure this latency, but the standard online ST metrics are not well suited for this task. As a consequence, new evaluation methods are proposed for streaming ST evaluation, which ensure realistic, yet interpretable results. Lastly, a novel method is presented for improving translation quality through the use of contextual information. Whereas standard online ST systems translate audios in isolation, there is a wealth of contextual information available for improving streaming ST systems. Our approach introduces the concept of streaming history by storing the most recent information of the translation process, which is then used by the model in order to improve translation quality., The research leading to these results has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreements no. 761758 (X5Gon) and 952215 (TAILOR), and Erasmus+ Educa- tion programme under grant agreement no. 20-226-093604-SCH (EXPERT); the Government of Spain’s grant RTI2018-094879-B-I00 (Multisub) funded by MCIN/AEI/10.13039/501100011033 & “ERDF A way of making Europe”, and FPU scholarships FPU18/04135; and the Generalitat Valenciana’s research project Classroom Activity Recognition (ref. PROMETEO/2019/111) and predoctoral research scholarship ACIF/2017/055.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analyzing the Nearly Optimal Solutions in a Multi-Objective Optimization Approach for the Multivariable Nonlinear Identification of a PEM Fuel Cell Cooling System

  • Pajares-Ferrando, Alberto|||0000-0002-2036-2709
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Salcedo-Romero-de-Ávila, José-Vicente|||0000-0003-1577-5039
[EN] In this work, the parametric identification of a cooling system in a PEM (proton exchange membrane) fuel cell is carried out. This system is multivariable and nonlinear. In this type of system there are different objectives and the unmodeled dynamics cause conflicting objectives (prediction errors in each output). For this reason, resolution is proposed using a multi-objective optimization approach. Nearly optimal alternatives can exist in any optimization problem. Among them, the nearly optimal solutions that are significantly different (that we call nearly optimal solutions nondominated in their neighborhood) are potentially useful solutions. In identification problems, two situations arise for consideration: 1) aggregation in the design objectives (when considering the prediction error throughout the identification test). When an aggregation occurs in the design objectives, interesting non-neighboring (significantly different) multimodal and nearly optimal alternatives appear. These alternatives have different trade-offs in the aggregated objectives; 2) new objectives in decision making appear. Some models can, with similar performance in the design objectives, obtain a significant improvement in new objectives not included in the optimization phase. A typical case of additional objectives are the validation objectives. In these situations, nearly optimal solutions nondominated in their neighborhood play a key role. These alternatives allow the designer to make the final decision with more valuable information. Therefore, this work highlights, as a novelty, the relevance of considering nearly optimal models nondominated in their neighborhood in problems of parametric identification of multivariable nonlinear systems and shows an application in a complex problem., This work was supported in part by the Ministerio de Ciencia, Innovacion y Universidades, Spain, under Grant RTI2018-096904-B-I00, and in part by the Generalitat Valenciana Regional Government under Project AICO/2019/055.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Validation of a FBA model for Pichia pastoris in chemostat cultures

  • Morales, Yeimy
  • Tortajada, Marta
  • Vehi, Josep
  • Picó, Jesús|||0000-0003-4144-3521
  • Llaneras, Francisco
Background: Constraint-based metabolic models and flux balance analysis (FBA) have been extensively used in the last years to investigate the behavior of cells and also as basis for different industrial applications. In this context, this work provides a validation of a small-sized FBA model of the yeast Pichia pastoris. Our main objective is testing how accurate is the hypothesis of maximum growth to predict the behavior of P. pastoris in a range of experimental environments. Results: A constraint-based model of P. pastoris was previously validated using metabolic flux analysis (MFA). In this paper we have verified the model ability to predict the cells behavior in different conditions without introducing measurements, experimental parameters, or any additional constraint, just by assuming that cells will make the best use of the available resources to maximize its growth. In particular, we have tested FBA model ability to: (a) predict growth yields over single substrates (glucose, glycerol, and methanol); (b) predict growth rate, substrate uptakes, respiration rates, and by-product formation in scenarios where different substrates are available (glucose, glycerol, methanol, or mixes of methanol and glycerol); (c) predict the different behaviors of P. pastoris cultures in aerobic and hypoxic conditions for each single substrate. In every case, experimental data from literature are used as validation. Conclusions: We conclude that our predictions based on growth maximisation are reasonably accurate, but still far from perfect. The deviations are significant in scenarios where P. pastoris grows on methanol, suggesting that the hypothesis of maximum growth could be not dominating in these situations. However, predictions are much better when glycerol or glucose are used as substrates. In these scenarios, even if our FBA model is small and imposes a strong assumption regarding how cells will regulate their metabolic fluxes, it provides reasonably good predictions in terms of growth, substrate preference, product formation, and respiration rates, This research has been partially supported by the Spanish Government (cicyt: DPI 2011-28112-C04-01, DPI 2013-46982-C2-2-R) and Biopolis S.L. (R.C.055/12). Yeimy Morales is grateful for the BR Grant of the University of Girona (BR2012/26). The authors are grateful to the company Biopolis S.L. for his support to this research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Diseño de nuevos algoritmos de guiado y navegación con evasión de colisiones para vehículos aéreos no tripulados.

  • Samaniego Riera, Franklin Eduardo
[ES] Debido a la creciente popularidad sobre la variedad de los Vehículos No Tripulados tanto en el campo militar como en el comercial, y de sus capacidades para navegar por diversos entornos, ya sean terrestres, aéreos o marinos, se evidencia que la clásica planificación de trayectorias y movimientos bidimensionales 2D podría no ser suficiente en un futuro inmediato. De esta manera, se debe resaltar que el presente trabajo aborda el problema de los Vehículos Aéreos No Tripulados (UAVs) de ala fija. En este sentido, la necesidad de encontrar una trayectoria navegable en el espacio euclídeo 3D se hace cada vez más necesario. En el caso de los UAV, considerar su cinemática para generar trayectorias suaves en tres dimensiones puede tener un interés significativo para la navegación autónoma aérea. Finalmente, los beneficios adicionales que se pueden producir son importantes. La principal dificultad de este problema es que los vehículos aéreos de características no-holonómicas se ven obligados a avanzar sin la posibilidad de detenerse a través de trayectorias 3D con curvaturas limitadas. En este sentido, se ha investigado la manera de proporcionar una completa caracterización de trayectorias óptimas para UAVs con un radio de giro limitado que se mueve en el plano tridimensional a una velocidad constante. Para completar tales tareas, un planificador de trayectorias no sólo debe proporcionar rutas tridimensionales para alcanzar una posición de destino sin colisionar con obstáculos, sino también debe asegurar que tal trayectoria sea adecuada para los UAVs que poseen propiedades cinemáticas específicas. Por lo tanto, el desarrollo del trabajo ha completado la algoritmia que genera una trayectoria discreta tridimensional al definir un conjunto de puntos 3D, resultantes de una división del espacio euclídeo tridimensional de manera dinámica, determinando las mejores opciones de avance, evitando analizar cada espacio del entorno completo. De esta manera, partiendo de los puntos 3D resultantes de la planificación de trayectoria tridimensional, se ha generado una trayectoria en forma de curva suave construida en función de las limitaciones de giro del UAV (resaltando que es difícil asegurar que el camino resultante cumpla con las restricciones cinemáticas en las tres dimensiones simultáneamente). Finalmente, es importante destacar que a menudo las restricciones mencionadas se calculan secuencialmente y de forma bidimensional, sobre un par de dimensiones desacopladas, lo que limita la capacidad de optimización. Para todo ello, se ha desarrollado un algoritmo de suavizado para un planificador de trayectorias que considera las restricciones cinemáticas tridimensionales completas sin desacoplar las dimensiones., [CA] Debut a la creixent popularitat sobre la varietat dels Vehicles No Tripulats tant en el camp militar com en el comercial, i de les seves capacitats per navegar per diversos entorns, ja siguin terrestres, aeris o marins, s'evidencia que la clàssica planificació de trajectòries i moviments bidimensionals 2D podria no ser suficient en un futur immediat. D'aquesta manera, s'ha de ressaltar que el present treball aborda el problema dels Vehicles Aeris No Tripulats (UAV) d'ala fixa. En aquest sentit, la necessitat de trobar una trajectòria navegable en l'espai euclidià 3D es fa cada vegada més necessari. En el cas dels UAV, considerar la seva cinemàtica per generar trajectòries suaus en tres dimensions pot tenir un interès significatiu per a la navegació autònoma aèria. Finalment, els beneficis addicionals que es poden produir són importants. La principal dificultat d'aquest problema és que els vehicles aeris de característiques no-holonómicas es veuen obligats a avançar sense la possibilitat de detenir-se a través de trajectòries 3D amb curvatures limitades. En aquest sentit, s'ha investigat la manera de proporcionar una completa caracterització de trajectòries òptimes per UAVs amb un radi de gir limitat que es mou en el pla tridimensional a una velocitat constant. Per completar aquestes tasques, un planificador de trajectòries no només ha de proporcionar rutes tridimensionals per assolir una posició de destinació sense col·lisionar amb obstacles, sinó també ha d'assegurar que tal trajectòria sigui adequada per als UAVs que posseeixen propietats cinemàtiques específiques. Per tant, el desenvolupament de la feina ha completat la algorísmia que genera una trajectòria discreta tridimensional a l'definir un conjunt de punts 3D, resultants d'una divisió de l'espai euclidià tridimensional de manera dinàmica, determinant les millors opcions d'avanç, evitant analitzar cada espai de l' entorn complet. D'aquesta manera, partint dels punts 3D resultants de la planificació de trajectòria tridimensional, s'ha generat una trajectòria en forma de corba suau construïda en funció de les limitacions de gir de l'UAV (ressaltant que és difícil assegurar que el camí resultant compleixi amb les restriccions cinemàtiques en les tres dimensions simultàniament). Finalment, és important destacar que sovint les restriccions esmentades es calculen seqöencialment i de forma bidimensional, sobre un parell de dimensions desacoblades, el que limita la capacitat d'optimització. Per tot això, s'ha desenvolupat un algoritme de suavitzat per a un planificador de trajectòries que considera les restriccions cinemàtiques tridimensionals completes sense desacoblar les dimensions., [EN] Due to the growing popularity of the variety of Unmanned Vehicles in both the military and commercial fields, and their capabilities to navigate diverse environments, whether land, air or sea, it is evident that the classic two-dimensional 2D trajectory and motion planning may not be enough in the near future. Thus, it should be noted that this paper addresses the problem of fixed-wing Unmanned Aerial Vehicles (UAVs). In this sense, the need to find a navigable path in 3D Euclidean space becomes more and more necessary. In the case of UAVs, considering their kinematics to generate smooth trajectories in three dimensions may be of significant interest for autonomous air navigation. Finally, the additional benefits that can be produced are important. The main difficulty of this problem is that air vehicles with non-holonomic characteristics are forced to advance without the possibility of stopping through 3D trajectories with limited curvatures. In this regard, research has been conducted to provide a complete characterization of optimal trajectories for UAVs with a limited turning radius that move in the 3D plane at a constant speed. To complete such tasks, a path planner must not only provide three-dimensional paths to reach a target position without colliding with obstacles, but must also ensure that such a path is suitable for UAVs that possess specific kinematic properties. Therefore, the development of the work has completed the algorithm that generates a discrete three-dimensional path by defining a set of 3D points, resulting from a division of the three-dimensional Euclidean space in a dynamic way, determining the best forward options, avoiding to analyze each space of the whole environment. In this way, starting from the 3D points resulting from the three-dimensional path planning, a smooth curve path has been generated, built according to the UAV turning constraints (highlighting that it is difficult to ensure that the resulting path meets the kinematic constraints in the three dimensions simultaneously). Finally, it is important to note that often the constraints mentioned are calculated sequentially and in a two-dimensional shape, on a pair of decoupled dimensions, which limits the ability to optimize. For all this, a smoothing algorithm has been developed for a path planner that considers the complete three-dimensional kinematic constraints without decoupling the dimensions., Este trabajo ha sido parcialmente financiado por el Gobierno de España a través del Ministerio de Economía y Competitividad bajo el proyecto de Investigación DP I2015−71443−R, y por la administración local de la Generalitat Valenciana a través de los proyectos GV /2017/029 y AICO/2019/055. El autor ha sido beneficiario de una beca otorgada por el Instituto de Fomento al Talento Humano (IFTH) (2015−AR2Q9209) a través del Gobierno de Ecuador.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Generación de maniobras suaves en el espacio 3D

  • Vanegas Zabala, Gloria Isabel
[ES] El desarrollo tecnológico en la creación de trayectorias que permitan navegación libre de colisiones de Vehículos Autónomos (AVs) ha sido un objetivo constante de estudio debido a su fuerte interés científico y tecnológico en las últimas tres décadas. Las diferentes clases de AVs, ya sean Vehículos Aéreos no Tripulados (UAVs), Vehículos Terrestres no Tripulados (UGVs) o Vehículos Submarinos no Tripulados (UUVs), fomentan el desarrollo e implementación de trayectorias en el espacio tridimensional (3D). Un grupo especial de tecnología UAV está caracterizado por su ala fija, lo cual destaca características particulares en los AVs, debido a las restricciones no-holonómicas (un sistema que se describe mediante un conjunto de parámetros sujetos a restricciones diferenciales que no permiten que un vehículo se mueva de forma instantánea en cualquier dirección). En este sentido, las trayectorias navegables para estos UAVs no deben ser construidas como un conjunto de líneas rectas y círculos como en la gran mayoría de planificadores basados en primitivas, ya que no se garantiza una continuidad en su curvatura. Por lo tanto, las trayectorias construidas para esta rama tecnológica deben ser resueltas considerando las diferentes restricciones de maniobrabilidad del UAV, además de criterios de continuidad de curvas (el problema de continuidad se refiere principalmente a la continuidad geométrica, en términos de continuidad tangencial o de curvatura), suavidad en las curvas (una curva es suave si sus derivadas son continuas en el intervalo definido) y la seguridad en el vuelo (el control de seguridad garantiza que una trayectoria suave esté suficientemente lejos de los obstáculos). Finalmente, la cinemática del movimiento de los vehículos es otro factor que debe ser considerado mientras se suavizan las trayectorias. El presente trabajo está enfocado en la creación de trayectorias navegables en el espacio 3D, para UAVs de características no-holonómicas. La principal dificultad al solventar este problema se debe a la movilidad de esta clase de UAVs, pues se ven obligados a avanzar sin la posibilidad de detenerse a través de trayectorias 3D, realizando curvas con curvaturas limitadas (una máxima capacidad de giro a una velocidad definida). En consecuencia, se han desarrollado las herramientas necesarias para proporcionar una completa caracterización de trayectorias óptimas (con un radio de giro limitado) para UAVs que se mueven en el espacio 3D a una velocidad constante. Esta tesis se centra en la generación de caminos con trayectorias navegables en el espacio Euclídeo 3D, que contenga curvas con curvatura continua, considerando de esta manera las restricciones cinemáticas de los UAVs. Por tal motivo el objetivo principal es el desarrollo de la matemática necesaria para definir curvas clotoides en el espacio tridimensional, de modo que puedan ser utilizadas como primitivas en la generación de trayectorias. Finalmente, culminado el desarrollo de esta herramienta básica, y en función de los obstáculos del entorno, se puede completar una planificación y replanificación activa de movimientos. Para complementar la investigación, la verificación de las herramientas de planificación de trayectorias y del sistema, se han realizado simulaciones con la ayuda del entorno de desarrollo integrado (IDE) Matlab. De la misma forma, se ha preparado una plataforma de simulación de vuelo, tomando las virtudes del simulador de vuelo FlightGear 2018, y el modelo dinámico del avión de ala fija con restricciones no-holonómicas (Kadett 2400 ). En cuanto a la generación de trayectorias 3D, se han desarrollado simulaciones off-line, donde las acciones de control que debe ejecutar el avión para que siga la trayectoria calculada son definidas por: acceleración, brusquedad de curvatura y brusquedad de torsión. Por último, el enfoque de revisión bibliográfica presente en este documento se ha centrado en trabajos realizados que buscan cumplir con las tareas de planificación., [CA] El desenvolupament tecnològic en la creació de trajectòries que permeten navegació lliure de col·lisions de Vehicles Autònoms (AVs) ha estat un objectiu constant d'estudi a causa del seu fort interés científic i tecnològic en les últimes tres dècades. Les diferents classes d'AVs, ja siguen Vehicles Aeris no Tripulats (UAVs), Vehicles Terrestres no Tripulats (UGVs) o Vehicles Submarins no Tripulats (UUVs), fomenten el desenvolupament i la implementació de trajectòries a l'espai tridimensional (3D). Un grup especial de tecnologia UAV està caracteritzat per la seua ala fixa, cosa que destaca característiques particulars en els AVs, a causa de les restriccions no-holonòmiques (un sistema que es descriu mitjançant un conjunt de paràmetres subjectes a restriccions diferencials que no permeten que un vehicle es menege de forma instantània en qualsevol direcció). En aquest sentit, les trajectòries navegables per a aquests UAVs no han de ser construïdes com un conjunt de línies rectes i cercles com a la gran majoria de planificadors basats en primitives, ja que no es garanteix una continuïtat en la seua curvatura. Per tant, les trajectòries construïdes per a aquesta branca tecnològica han de ser resoltes considerant les diferents restriccions de maniobrabilitat de l'UAV, a més de criteris de continuïtat de corbes (el problema de continuïtat es refereix principalment a la continuïtat geomètrica, en termes de continuïtat tangencial o de curvatura), suavitat a les corbes (una corba és suau si les seves derivades són contínues en l'interval definit) i la seguretat en el vol (el control de seguretat garanteix que una trajectòria suau estiga prou lluny dels obstacles). Finalment, la cinemàtica del moviment dels vehicles és un altre factor que cal considerar mentre se suavitzen les trajectòries. Aquest treball està enfocat a la creació de trajectòries navegables a l'espai 3D, per a UAVs de característiques no-holonòmiques. La principal dificultat en solucionar aquest problema es deu a la mobilitat d'aquesta classe de UAVs, ja que es veuen obligats a avançar sense la possibilitat d'aturarse a través de trajectòries 3D, fent corbes amb curvatures limitades (una màxima capacitat de gir a una velocitat definida). En conseqüència, s'han desenvolupat les ferramentes necessàries per proporcionar una completa caracterització de trajectòries òptimes (amb un radi de gir limitat) per a UAVs que es mouen al pla 3D a una velocitat constant. Aquesta tesi se centra en la generació de camins amb trajectòries navegables a l'espai Euclidià 3D, que continguen corbes amb curvatura contínua, considerant així les restriccions cinemàtiques dels UAVs. Per aquest motiu, l'objectiu principal és el desenvolupament de la matemàtica necessària per definir corbes clotoides a l'espai tridimensional, de manera que puguen ser utilitzades com a primitives en la generació de trajectòries. Finalment, culminat el desenvolupament d'aquesta ferramenta bàsica, i en funció dels obstacles de l'entorn, es pot completar una planificació i una replanificació activa de moviments. Per complementar la investigació, la verificació de les ferramentes de planificació de trajectòries i del sistema, s'han fet simulacions amb l'ajuda de l'entorn de desenvolupament integrat (IDE) Matlab. De la mateixa manera, s'ha preparat una plataforma de simulació de vol, prenent les virtuts del simulador de vol FlightGear 2018 i el model dinàmic de l'avió d'ala fixa amb restriccions no-holonòmiques (Kadett 2400). Pel que fa a la generació de trajectòries 3D, s'han desenvolupat simulacions off-line, on les accions de control que ha d'executar l'avió perquè seguisca la trajectòria calculada són definides per: acceleració, brusquedat de curvatura i brusquedat de torsió. Finalment, l'enfocament de revisió bibliogràfica present en aquest document s'ha centrat en treballs realitzats que busquen complir les tasques de planificació de trajectòria, planificació de moviment i construcció de corbes suaus per a AVs., [EN] The technological development in the creation of trajectories that allow collision-free navigation of Autonomous Vehicles (AVs) has been a continuous target of study due to its strong scientific and technological interest in the last three decades. Different classes of AVs, whether, Unmanned Aerial Vehicles (UAVs), Unmanned Ground Vehicles (UGVs) or Unmanned Underwater Vehicles (UUVs), encourage the development and implementation of paths in three-dimensional (3D) space. A special group of UAV technology is characterized by its fixed wing, which emphasizes particular characteristics in UAVs, due to non-holonomic constraints (a system that is described by a set of parameters subject to differential constraints that do not allow a vehicle to move instantaneously in any direction). In this sense, navigable paths for these UAVs should not be built as a set of straight lines and circles as in the vast majority of primitive-based planners, since no continuity in their curvature is guaranteed. Therefore, the paths built for this technology branch must be solved considering the different maneuverability constraints of the UAV, in addition to curve continuity criteria (the continuity problem refers mainly to geometric continuity, in terms of tangential or curvature continuity), curve smoothness (a curve is smooth if its derivatives are continuous in the defined interval) and flight safety (safety control ensures that a smooth path is sufficiently far away from obstacles). Finally, the kinematics of vehicle motion is another factor to be considered while smoothing paths. This thesis work is focused on the creation of navigable paths in 3D space for UAVs with non-holonomic characteristics. The main difficulty in solving this problem is due to the mobility of this kind of UAVs, since they are forced to move without the possibility of stopping through 3D paths, performing curves with limited curvatures (a maximum turning capacity at a defined speed). Consequently, the needed tools have been developed to provide a complete characterization of optimal paths (with a limited turning radius) for UAVs moving in the 3D plane at a constant velocity. This thesis focuses on the generation of paths with navigable trajectories in 3D Euclidean space, containing curves with continuous curvature, thus considering the kinematic constraints of UAVs. Therefore, the main aim is the development of the necessary mathematics to define clothoid curves in the three-dimensional space, so that they can be used as primitives in the generation of paths. Finally, once the development of this basic tool has been completed, and depending on the obstacles in the environment, an active planning and replanning of movements can be completed. To complement the research, the verification of the path planning tools and the system, simulations have been performed with the help of the integrated development environment (IDE) Matlab. In the same way, a flight simulation platform has been prepared, taking the virtues of the FlightGear 2018 flight simulator, and the dynamic model of the fixed-wing aircraft with non-holonomic constraints (Kadett 2400 ). Regarding the generation of 3D paths, off-line simulations have been developed, where the control actions to be executed by the aircraft to follow the calculated path are defined by: acceleration, curvature sharpness and torsion sharpness. Finally, the literature review approach presented in this document has focused on works that address the tasks of path planning, motion planning and construction of smooth curves for AVs. Special care has been taken in the methodologies used, the variety of techniques, in addition to the advantages and disadvantages presented throughout the literature review., The authors are grateful to the financial support of Spanish Ministry of Economy and European Union, grant DPI2016-81002-R (AEI/FEDER, UE). This work was also supported by the postdoctoral fellowship “APOSTD/2017/055” and the local administration “GV/2017/029” (Generalitat Valenciana, Conse- lleria d’Educació) Valencia - Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparative Study of Optimal Multivariable LQR and MPC Controllers for Unmanned Combat Air Systems in Trajectory Tracking

  • Ortiz, Alvaro
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Simarro Fernández, Raúl|||0000-0002-7311-2025
[EN] Guidance, navigation, and control system design is, undoubtedly, one of the most relevant issues in any type of unmanned aerial vehicle, especially in the case of military missions. This task needs to be performed in the most efficient way possible, which involves trying to satisfy a set of requirements that are sometimes in opposition. The purpose of this article was to compare two different control strategies in conjunction with a path-planning and guidance system with the objective of completing military missions in the most satisfactory way. For this purpose, a novel dynamic trajectory-planning algorithm is employed, which can obtain an appropriate trajectory by analyzing the environment as a discrete 3D adaptive mesh and performs a softening process a posteriori. Moreover, two multivariable control techniques are proposed, i.e., the linear quadratic regulator and the model predictive control, which were designed to offer optimal responses in terms of stability and robustness., This work was partially funded by project RTI2018-096904-B-I00 from the Spanish Ministry of Economy and by project AICO/2019/055 from Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Conceptual design of the early implementation of the NEutron Detector Array (NEDA) with AGATA

  • Huyuk, T.
  • Di Nitto, Antonio
  • Jaworski, Grzegorz
  • Gadea, Andres
  • Valiente-Dobón, Jose Javier
  • Nyberg, Johan
  • Palacz, Marcin
  • Soderstrom, Par-Anders
  • de Angelis, Giacomo
  • Atac, Ayse
  • Collado, Javier
  • Domingo-Pardo, Cesar
  • Egea, Francisco Javier
  • Erduran, Nizamettin
  • Aliaga, Ramón J.|||0000-0002-2513-7711
  • Gadea Gironés, Rafael|||0000-0003-2857-8667
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
[EN] The NEutron Detector Array (NEDA) project aims at the construction of a new high-efficiency compact neutron detector array to be coupled with large gamma-ray arrays such as AGATA. The application of NEDA ranges from its use as selective neutron multiplicity filter for fusion-evaporation reaction to a large solid angle neutron tagging device. In the present work, possible configurations for the NEDA coupled with the Neutron Wall for the early implementation with AGATA has been simulated, using Monte Carlo techniques, in order to evaluate their performance figures. The goal of this early NEDA implementation is to improve, with respect to previous instruments, efficiency and capability to select multiplicity for fusion-evaporation reaction channels in which 1, 2 or 3 neutrons are emitted. Each NEDA detector unit has the shape of a regular hexagonal prism with a volume of about 3.23 l and it is filled with the EJ301 liquid scintillator, that presents good neutron-gamma discrimination properties. The simulations have been performed using a fusion-evaporation event generator that has been validated with a set of experimental data obtained in the Ni-58 + Fe-56 reaction measured with the Neutron Wall detector array., This work was partially supported by MINECO, Spain, under the grants FPA2011-29854-C04, FPA2012-33650 and FPA2014-57196-C5, and Generalitat Valenciana, Spain, under the grants PROMETEO/2010/101 and PROMETEOII/2014/019, The European Regional Development Fund (FEDER) of European Commission, the Swedish Research Council, the Polish National Science Centre under contracts: 801/N-COPIN/2010/0 (COPIN/IN2P3 collaboration), UM0-2014/14/M/ST2/00738 (COPIN-INFN collaboration), UM0-2013/08/M/ST2/0025 (LEA-COPIGAL collaboration), the Scientific and Technological Council of Turkey (Proj. no. 106T055 and 114F473), and the UK STFC (ST/L005727/1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

LinkEHR-Ed: A multi-reference model archetype editor based on formal semantics

  • Maldonado Segura, José Alberto
  • Moner Cano, David
  • Boscá Tomás, Diego
  • Fernandez Breis, Jesualdo Tomas
  • Angulo Fernández, Carlos
  • Robles Viejo, Montserrat
Purpose To develop a powerful archetype editing framework capable of handling multiple reference models and oriented towards the semantic description and standardization of legacy data. Methods The main prerequisite for implementing tools providing enhanced support for archetypes is the clear specification of archetype semantics. We propose a formalization of the definition section of archetypes based on types over tree-structured data. It covers the specialization of archetypes, the relationship between reference models and archetypes and conformance of data instances to archetypes. Results LinkEHR-Ed, a visual archetype editor based on the former formalization with advanced processing capabilities that supports multiple reference models, the editing and semantic validation of archetypes, the specification of mappings to data sources, and the automatic generation of data transformation scripts, is developed. Conclusions LinkEHR-Ed is a useful tool for building, processing and validating archetypes based on any reference model., This work was supported in part by the Spanish Ministry of Education and Science under grant TS12007-66S7S-C02; by the Generalitat Valenciana under grant APOSTD/2007/055 and by the program PAID-06-07 de la Universidad Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

T-S Fuzzy Bibo Stabilisation of Non-Linear Systems Under Persistent Perturbations Using Fuzzy Lyapunov Functions and Non-PDC Control Laws

  • Salcedo-Romero-de-Ávila, José-Vicente|||0000-0003-1577-5039
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Hilario Caballero, Adolfo|||0000-0002-3237-8652
[EN] This paper develops an innovative approach for designing non-parallel distributed fuzzy controllers for continuous-time non-linear systems under persistent perturbations. Non-linear systems are represented using Takagi-Sugeno fuzzy models. These non-PDC controllers guarantee bounded input bounded output stabilisation in closed-loop throughout the computation of generalised inescapable ellipsoids. These controllers are computed with linear matrix inequalities using fuzzy Lyapunov functions and integral delayed Lyapunov functions. LMI conditions developed in this paper provide non-PDC controllers with a minimum *-norm (upper bound of the 1-norm) for the T-S fuzzy system under persistent perturbations. The results presented in this paper can be classified into two categories: local methods based on fuzzy Lyapunov functions with guaranteed bounds on the first derivatives of membership functions and global methods based on integral-delayed Lyapunov functions which are independent of the first derivatives of membership functions. The benefits of the proposed results are shown through some illustrative examples., This work has been funded by Ministerio de Economia y Competitividad, Spain (research project RTI2018-096904-B-I00) and Conselleria de Educacion, Cultura y Deporte-Generalitat Valenciana, Spain (research project AICO/2019/055).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Trends in arsenic levels in PM10 and PM2.5 aerosol fractions in an industrialized area

  • García Aleix, J.R.
  • Delgado Saborit, J.M.
  • Amigó Descarrega, Jose Mª
  • Esteve Cano, Vicente
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
Arsenic is a toxic element that affects human health and is widely distributed in the environment. In the area of study, the main Spanish and second largest European industrial ceramic cluster, the main source of arsenic aerosol is related to the impurities in some boracic minerals used in the ceramic process. Epidemiological studies on cancer occurrence in Spain points out the study region as one with the greater risk of cancer. Concentrations of particulate matter and arsenic content in PM10 and PM2.5 were measured and characterized by ICP-MS in the area of study during the years 2005-2010. Concentrations of PM10 and its arsenic content range from 27 to 46 mu g/m(3) and from 0.7 to 6 ng/m(3) in the industrial area, respectively, and from 25 to 40 mu g/m(3) and from 0.7 to 2.8 ng/m(3) in the urban area, respectively. Concentrations of PM2.5 and its arsenic content range from 12 to 14 mu g/m(3) and from 0.5 to 1.4 ng/m(3) in the urban background area, respectively. Most of the arsenic content is present in the fine fraction, with ratios of PM2.5/PM10 in the range of 0.65-0.87. PM10, PM2.5, and its arsenic content show a sharp decrease in recent years associated with the economic downturn, which severely hit the production of ceramic materials in the area under study. The sharp production decrease due to the economic crisis combined with several technological improvements in recent years such as substitution of boron, which contains As impurities as raw material, have reduced the concentrations of PM10, PM2.5, and As in air to an extent that currently meets the existing European regulations., The authors are grateful to Ilmo. Ayuntamiento de L'Alcora for the financial support through the 07I055 project, Generalitat Valenciana for their support and collaboration, and Miss Miriam Rubio Renau for her assistance in the laboratory work. Also, the authors are indebted to an anonymous referee for the interesting suggestions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Drive Force and Longitudinal Dynamics Estimation in Heavy-Duty Vehicles

  • Girbés, Vicent
  • Hernández, Daniel
  • Leopoldo Armesto|||0000-0003-0979-4428
  • Dols Ruiz, Juan Francisco|||0000-0003-1815-1360
  • Sala, Antonio|||0000-0002-5691-8772
[EN] Modelling the dynamic behaviour of heavy vehicles, such as buses or trucks, can be very useful for driving simulation and training, autonomous driving, crash analysis, etc. However, dynamic modelling of a vehicle is a difficult task because there are many subsystems and signals that affect its behaviour. In addition, it might be hard to combine data because available signals come at different rates, or even some samples might be missed due to disturbances or communication issues. In this paper, we propose a non-invasive data acquisition hardware/software setup to carry out several experiments with an urban bus, in order to collect data from one of the internal communication networks and other embedded systems. Subsequently, non-conventional sampling data fusion using a Kalman filter has been implemented to fuse data gathered from different sources, connected through a wireless network (the vehicle¿s internal CAN bus messages, IMU, GPS, and other sensors placed in pedals). Our results show that the proposed combination of experimental data gathering and multi-rate filtering algorithm allows useful signal estimation for vehicle identification and modelling, even when data samples are missing., This research was funded by the Spanish Ministry of Economy and European Union, grant DPI2016-81002-R, by Generalitat Valenciana, grant APOSTD/2017/055, and by the European Union too through the European Social Fund (ESF). The authors want to acknowledge public transport operators Autos Vallduxense S.L. and EMT Valencia for their support to the project by lending their vehicles and bus drivers. The authors are also thankful to Instituto de Diseño y Fabricación and SAFETRANS project (DPI2013-42302-R) research teams, for lending most of the electronic devices and sensors used in the experimentation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Mapping the scientific structure of organization and management of enterprises using complex networks

  • Olivares-Gil, Alicia
  • Arnaiz-Rodríguez, Adrián
  • Ramírez-Sanz, José Miguel
  • Garrido-Labrador, José Luis
  • Ahedo, Virginia
  • García-Osorio, César
  • Santos, José Ignacio
  • Galán, José Manuel
[EN] Understanding the scientific and social structure of a discipline is a fundamental aspect for scientific evaluation processes, identifying trends and niches, and balancing the trade-off between exploitation and exploration in research. In the present contribution, the production of doctoral theses is used as a proxy to analyze the scientific structure of the knowledge area of business organization in Spain. To that end, a complex networks approach is selected, and two different networks are built: (i) the social network of co-participation in thesis examining committees and thesis supervision, and (ii) a bipartite network of theses and thesis descriptors. The former has a modular structure that is partially explained by thematic specialization in different subdisciplines. The latter serves to assess the interdisciplinary structure of the discipline, as it enables the characterization of affinity levels between fields, research poles and thematic clusters. Our results have implications for the scientific evaluation and formal definition of related fields., The authors acknowledge financial support from the and Spanish Ministry of Science, Innovation Universities (RED2018-102518-T), the Spanish State Research Agency (PID2020118906GB-I00 and PID2020-119894GB-I00 via AEI/10.13039/501100011033), the Junta de Castilla y León – Consejería de Educación (BU055P20), Fundación La Caixa (2020/00062/001) and from NVIDIA Corporation and its donation of the TITAN Xp GPUs that facilitated this research. This work was partially supported by the European Social Fund, as the authors José Miguel Ramírez-Sanz, José Luis Garrido-Labrador and Alicia OlivaresGil are the recipient of a predoctoral grant from the Department of Education of Junta de Castilla y León (VA) (ORDEN EDU/875/2021). In addition, this work was also partially supported by the Generalitat Valenciana via its Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital, as Adrián Arnaiz is recipicient of a predoctoral grant. The authors would also like to thank Dr. Manzanedo, Dra. Saiz-Bárcena, Dr. Solé Parellada, Dr. Izquierdo and Dr. del Olmo for their insightful help to improve the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Design Procedure for Interdigital Waveguide Bandpass Filters Based on Flat Metallic Strips

  • García, R.
  • San-Blas, A. A.
  • Bonte, S.
  • Coves, A.
  • Sánchez-Soriano, M. A.
  • Guglielmi, Marco
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] In this work, we describe a new topology for interdigital bandpass filters implemented in waveguide technology. Compared to classical coaxial resonators, which are typically based on cylindrical metallic posts, the resonators that we propose are based on rectangular boxed cavities loaded with flat metallic strips of a finite thickness. The main advantages of the proposed topology are low-cost practical realization and manufacture simplicity. The design process, which is based on the classical circuit-based approach combined with an efficient segmentation of the component, uses the well-known Aggressive Space Mapping technique, with the aim of reducing the overall computation effort. In order to validate the new topology and the design procedure, interdigital bandpass filters of orders 3 and 5 operating at the S-band have been designed. For validation purposes, the results obtained are successfully compared to simulations provided by two different full-wave electromagnetic tools (i.e., Ansys HFSS and CST Studio Suite). Furthermore, a multipactor study has also been performed, with the aim of exploring the power handling capability of the proposed filters in view of possible space applications. Finally, the design of classical interdigital filters based on cylindrical posts is also discussed, with the aim of comparing both topologies regarding compactness, as well as in terms of their electrical and high-power performance., This work has been funded by the Ministerio de Ciencia, Innovacion y Universidades (Spanish Government) through the Subprojects C41 and C43 of the R&D Projects PID2022-136590OB (under grant AEI/10.13039/501100011033/FEDER, UE) and TED2021- 129196B (under Grant 10.13039/501100011033/Union Europea NextGenerationEU/PRTR), and in part by Conselleria de Educacion, Universidades y Empleo, Generalitat Valenciana, under Project CIAICO/2021/055.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Desarrollo de una metodología de optimización multiobjetivo considerando soluciones casi-óptimas. Aplicación a problemas en ingeniería de control

  • Pajares-Ferrando, Alberto|||0000-0002-2036-2709
[ES] En un problema de optimización multiobjetivo, habitualmente se busca caracterizar el conjunto de soluciones óptimas de Pareto, ignorando las soluciones casi-óptimas. Sin embargo, estas soluciones pueden proporcionar al diseñador una mayor diversidad de soluciones potencialmente útiles, lo que permite tomar una decisión final más informada. Pese a ello, obtener todas las soluciones casi-óptimas puede aumentar en exceso el número de ellas y, en consecuencia, ralentizar en exceso el proceso de optimización y complicar la etapa de decisión. Por ello, se propone obtener las soluciones casi-óptimas que mayor información relevante aporten al diseñador, descartando el resto de ellas. En este trabajo se asume que las soluciones más relevantes son, además de las óptimas (en el espacio de objetivos), las alternativas casi-óptimas significativamente diferentes (no vecinas en el espacio de parámetros) a las soluciones que le dominan, es decir, las soluciones casi-óptimas no dominadas en su vecindad. Este conjunto de soluciones proporciona alternativas diferentes sin aumentar en exceso el número de ellas. Para caracterizar este conjunto, en esta tesis, se presenta y valida un nuevo algoritmo (nevMOGA). Gracias a este algoritmo y la metodología descrita para su aplicación, el diseñador puede obtener estas soluciones con el objetivo de realizar un análisis más profundo, tomando la decisión final con mayor información. Además, en la tesis, se aplica esta nueva metodología en problemas de identificación de modelos y diseño de controladores multivariables. En ellos, se pone de manifiesto la utilidad de obtener las alternativas casi-óptimas no dominadas en su vecindad, proporcionando nueva información relevante para el diseñador. De hecho, en algunos de estos problemas, las alternativas casi-óptimas son preferidas en lugar de las óptimas., [CA] En un problema d'optimització multiobjectiu, habitualment se busca caracteritzar el conjunt de solucions òptimes de Pareto, ignorant les solucions quasi-òptimes. Aquestes solucions poden proporcionar al dissenyador una major diversitat de solucions potencialment útils, la qual cosa permet prendre una decisió final més informada. No obstant això, obtenir totes les solucions quasi-òptimes pot augmentar en excés el número d'elles, alentint en excés el procés d'optimització i complicant l'etapa de decisió. Per això, es proposa obtenir les solucions quasi-òptimes que major informació rellevant aporten al dissenyador, descartant la resta d'elles. En aquest treball s'assumix que les solucions més rellevants són, a més de les òptimes (en l'espai d'objectius), les alternatives quasi-òptimes significativament diferents (no veïnes en l'espai de paràmetres) a les solucions que li dominen, és a dir, les solucions quasi-òptimes no dominades en el seu veïnatge. Aquest conjunt de solucions proporciona alternatives diferents sense augmentar en excés el número d'elles. Per a caracteritzar aquest conjunt, en aquesta tesi, es presenta i valida un nou algorisme (nevMOGA). Gràcies a aquest algorisme i la metodologia descrita per a la seua aplicació, el dissenyador pot obtenir aquestes solucions amb l'objectiu de realitzar una anàlisi més profunda, prenent la decisió final amb major informació. A més, en la tesi, s'aplica aquesta nova metodologia en problemes d'identificació de models i disseny de controladors multivariables. En ells, es posa de manifest la utilitat d'obtenir les alternatives quasi-òptimes no dominades en el seu veïnatge, proporcionant nova informació rellevant per al dissenyador. De fet, en diversos casos, les alternatives quasi-òptimes són preferides en lloc de les òptimes., [EN] In a multiobjective optimization problem, the aim is usually to characterize the set of optimal solutions (Pareto set) and the nearly optimal solutions are ignored. Proceeding in this way has a drawback, namely, some of these nearly optimal solutions are potentially useful for the designer and their consideration can lead him or her to make a better informed decision. However, finding all the nearly optimal solutions would excessively slow down the optimization process and would complicate the decision stage unnecessarily. In order to overcome this problem, we propose a new methodology to obtain only the nearly optimal solutions that really provide relevant information to the designer, discarding the rest of them. In this work, it is assumed that the most relevant solutions are, apart from the optimal ones, the nearly optimal solutions which are significantly different (not neighbors in the parameter space) from the solutions that dominate them, that is to say, the nearly optimal solutions non dominated in their neighborhood. In this way, a set of potentially useful alternatives is provided, without increasing their number unnecessarily. In order to characterize this new set of solutions, a novel algorithm (nevMOGA) is presented and validated. Thanks to this algorithm and to the methodology described for its application, a designer will be able to obtain these new solutions and, therefore, this will enable him or her to perform a deeper analysis of the problem, which eventually will result in a more knowledgeable decision. In addition, this new methodology is applied to several engineering problems in the areas of model tuning and multivariable control design. Through these application examples, the usefulness of obtaining and taking into account the nearly optimal solutions non dominated in their neighborhood is demonstrated. In effect, in some of these cases, a nearly optimal solution is preferred to any of the optimal ones., Este trabajo ha sido parcialmente subvencionado por el Ministerio de Economía y Competitividad a través de la beca FPU15/01652, y los proyectos DPI2015- 71443-R y RTI2018-096904-B-I00, por la administración local Generalitat Valenciana a través de la beca ACIF/2015/079 y los proyectos GV/2017/029 y AICO/2019/055, y por la Universitat Politècnica de València a través de la beca FPI-2014/2429.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Spatial filtering of sound beams by sonic crystals

  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • Pérez Arjona, Isabel|||0000-0001-9010-6287
  • Staliunas, K.
We propose and numerically demonstrate the feasibility of spatial filtering, i.e. a selective removal of the high spatial frequency components, of narrow acoustic beams during their propagation along a two- dimensional sonic crystal. The filtering effect occurs due to two different mechanisms, depending on the particular form of the dispersion surfaces of the propagation modes in sonic crystal. Reflection or deflection of undesired spatial frequency components occurs for these two mechanisms. It is shown that, as a consequence of spatial filtering, the angular spectrum of the beams is narrowed, and the noisy beams are efficiently cleaned., The work was financially supported by Generalitat Valenciana through GV/2011/055, Spanish Ministerio de Ciencia e Innovacion and by European Union FEDER trough Projects FIS 2008-06024-C02-02 and -03.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

MLLP-VRAIN Spanish ASR Systems for the Albayzín-RTVE 2020 Speech-to-Text Challenge: Extension

  • Baquero-Arnal, Pau
  • Iranzo-Sánchez, Javier
  • Pérez-González de Martos, Alejandro Manuel
  • Jorge-Cano, Javier|||0000-0002-9279-6768
  • Giménez Pastor, Adrián
  • Garcés Díaz-Munío, Gonçal|||0000-0002-2594-5858
  • Silvestre Cerdà, Joan Albert|||0000-0003-2291-8296
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Sanchis Navarro, José Alberto|||0000-0002-2943-0990
  • Juan, Alfons|||0000-0002-9984-4072
[EN] This paper describes the automatic speech recognition (ASR) systems built by the MLLP-VRAIN research group of Universitat Politècnica de València for the Albayzín-RTVE 2020 Speech-to-Text Challenge, and includes an extension of the work consisting of building and evaluating equivalent systems under the closed data conditions from the 2018 challenge. The primary system (p-streaming_1500ms_nlt) was a hybrid ASR system using streaming one-pass decoding with a context window of 1.5 seconds. This system achieved 16.0% WER on the test-2020 set. We also submitted three contrastive systems. From these, we highlight the system c2-streaming_600ms_t which, following a similar configuration as the primary system with a smaller context window of 0.6 s, scored 16.9% WER points on the same test set, with a measured empirical latency of 0.81 ± 0.09 s (mean ± stdev). That is, we obtained state-of-the-art latencies for high-quality automatic live captioning with a small WER degradation of 6% relative. As an extension, the equivalent closed-condition systems obtained 23.3% WER and 23.5% WER, respectively. When evaluated with an unconstrained language model, we obtained 19.9% WER and 20.4% WER; i.e., not far behind the top-performing systems with only 5% of the full acoustic data and with the extra ability of being streaming-capable. Indeed, all of these streaming systems could be put into production environments for automatic captioning of live media streams., The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreements no. 761758 (X5Gon) and 952215 (TAILOR), and Erasmus+ Education programme under grant agreement no. 20-226-093604-SCH (EXPERT); the Government of Spain's grant RTI2018-094879-B-I00 (Multisub) funded by MCIN/AEI/10.13039/501100011033 & "ERDF A way of making Europe", and FPU scholarships FPU14/03981 and FPU18/04135; the Generalitat Valenciana's research project Classroom Activity Recognition (ref. PROMETEO/2019/111), and predoctoral research scholarship ACIF/2017/055; and the Universitat Politecnica de Valencia's PAID-01-17 R&D support programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Dynamic Screening and the Chemical Inductor of Perovskite Solar Cells: From J-V Transients to Impedance Spectroscopy

  • Balaguera, Enrique H.
  • Rad, Elnaz Ghahremani
  • Uhl, Alexander R.
  • Guerrero, Antonio
  • Bisquert, Juan|||0000-0003-4987-4887
[EN] The operation of metal halide perovskite solar cells is governed by the interplay between electronic transport and recombination processes strongly modulated by ionic dynamics. We present a unified framework that disentangles the photocurrent into distinct ionic-electronic conductivity pathways, incorporating recombination, polarization, and charge-collection effects. Using simplified dynamic models, we describe how electric-field screening and slow ionic relaxation shape the hysteresis of the photocurrent. From the nonlinear differential equations, we derive the corresponding impedance response and show that the characteristic low-frequency "double inductor" feature arises from two separate mechanisms: ion-controlled recombination and ionic screening of the internal electric field. This approach offers a general route to connect transient photocurrent phenomena with impedance signatures, providing new tools to identify and classify degradation pathways in perovskite solar cells., This study forms part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/055). Funding for the work was also provided by the Universidad Rey Juan Carlos, project numbers M3704 and M3712. Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. Funding for open access charge: CRUE-Universitat Politecnica de Valencia. E.G.R. and A.R.U. acknowledge the financial support provided by MITACS, the Natural Sciences and Engineering Research Council of Canada (NSERC), and Canada Foundation for Innovation (CFI) and British Columbia Knowledge Development Fund (BCKDF), through grants BC-ISED IT26569, RGPIN-2019-05489, I2IPJ 586910-23, and 39081 and 42549, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Angular bandgaps in sonic crystals: evanescent waves and spatial complex dispersion relation

  • Romero-García, Vicente|||0000-0002-3798-6454
  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • Staliünas, Kestutis
Phononic crystals are artificial materials made of a periodic distribution of solid scatterers embedded into a solid host medium with different physical properties. An interesting case of phononic crystals, known as sonic crystals (SCs), appears when the solid scatterers are periodically embedded in a fluid medium. In SCs only longitudinal modes are allowed to propagate and both the theoretical and the experimental studies of the properties of the system are simplified without loss of generality. The most celebrated property of these systems is perhaps the existence of spectral band gaps. However, the periodicity of the system can also affect to the spatial dispersion, making possible the control of the diffraction inside these structures. In this work we study the main features of the spatial dispersion in SCs from a novel point of view taking into account the evanescent properties of the system, i.e., studying the complex spatial dispersion relations. The evanescent behavior of the propagation of waves in the angular band gaps are theoretically and experimentally observed in this work. Both the numerical predictions and the experimental results show the presence of angular band gaps in good agreement with the complex spatial dispersion relation. The results shown in this work are independent of the spatial scale of the structure, and in principle the fundamental role of the evanescent waves could be also expected in micro- or nanoscale phononic crystals., This work was supported by MCI Secretaria de Estado de Investigacion (Spanish government) and the FEDER funds, under Grant Nos. MAT2009-09438, FIS2011-29734-C02-02, and from Generalitat Valencia through Project No. GV/2011/055. V.R.G. is grateful for the support of "Programa de Contratos Post-Doctorales con Movilidad UPV (CEI-01-11)." We acknowledge the Centro de Tecnologias Fisicas: Acustica, Materiales y Astrofisica and the Sonic Crystal Technologies Research Group of the Universitat Politecnica de Valencia for the use of the anechoic chamber and the 3DReAMS respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evolution of Performance Parameters of Perovskite Solar Cells with Current Voltage Scan Frequency

  • Balaguera, Enrique H.
  • Bisquert, Juan|||0000-0003-4987-4887
[EN] Current voltage measurements are a standard testing protocol to determine the efficiency of any solar cell. However,perovskite solar cells display significant kinetic phenomena that modify the performance at several time scales, due to hysteresis,internal capacitances, and related mechanisms. Here, we develop a method to analyze the current¿voltage curves by using largeamplitude sinusoids as the excitation waveforms, specifically addressed to determine the influence of cycling frequency on relevantperformance parameters. We solve a system of equations representative of charge collection and recombination, that provide thefrequency-dependent dynamical behavior of the internal ion-controlled surface recombination processes that cause open-circuitvoltage variations often observed in high performance devices. We analyze several reported experimental data pertaining to state-of-art devices, and we showcase the key parameters governing the evolution of hysteresis phenomena as the scan speed is increased inrelation to Impedance Spectroscopy., This work has received funding from the Universidad Rey Juan Carlos, project number M2993. This study forms part of the Advanced Materials program and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/055).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

The MLLP-UPV Spanish-Portuguese and Portuguese-Spanish Machine Translation Systems for WMT19 Similar Language Translation Task

  • Baquero-Arnal, Pau
  • Iranzo-Sánchez, Javier
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Juan, Alfons|||0000-0002-9984-4072
[EN] This paper describes the participation of the MLLP research group of the Universitat Politècnica de València in the WMT 2019 Similar Language Translation Shared Task. We have submitted systems for the Portuguese ↔ Spanish language pair, in both directions. We have submitted systems based on the Transformer architecture as well as an in development novel architecture which we have called 2D alternating RNN. We have carried out domain adaptation through fine-tuning., The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement no. 761758 (X5gon); the Government of Spain's research project Multisub, ref. RTI2018-094879-B-I00 (MCIU/AEI/FEDER, EU) and the Generalitat Valenciana's predoctoral research scholarship ACIF/2017/055.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Smooth 3D Path Planning by Means of Multiobjective Optimization for Fixed-Wing UAVs

  • Samaniego, Franklin
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Simarro Fernández, Raúl|||0000-0002-7311-2025
[EN] Demand for 3D planning and guidance algorithms is increasing due, in part, to the increase in unmanned vehicle-based applications. Traditionally, two-dimensional (2D) trajectory planning algorithms address the problem by using the approach of maintaining a constant altitude. Addressing the problem of path planning in a three-dimensional (3D) space implies more complex scenarios where maintaining altitude is not a valid approach. The work presented here implements an architecture for the generation of 3D flight paths for fixed-wing unmanned aerial vehicles (UAVs). The aim is to determine the feasible flight path by minimizing the turning effort, starting from a set of control points in 3D space, including the initial and final point. The trajectory generated takes into account the rotation and elevation constraints of the UAV. From the defined control points and the movement constraints of the UAV, a path is generated that combines the union of the control points by means of a set of rectilinear segments and spherical curves. However, this design methodology means that the problem does not have a single solution; in other words, there are infinite solutions for the generation of the final path. For this reason, a multiobjective optimization problem (MOP) is proposed with the aim of independently maximizing each of the turning radii of the path. Finally, to produce a complete results visualization of the MOP and the final 3D trajectory, the architecture was implemented in a simulation with Matlab/Simulink/flightGear., The authors would like to acknowledge the Spanish Ministerio de Ciencia, Innovacion y Universidades for providing funding through the project RTI2018-096904-B-I00 and the local administration Generalitat Valenciana through projects GV/2017/029 and AICO/2019/055. Franklin Samaniego thanks IFTH (Instituto de Fomento al Talento Humano) Ecuador (2015-AR2Q9209), for its sponsorship of this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Streaming cascade-based speech translation leveraged by a direct segmentation model

  • Iranzo-Sánchez, Javier
  • Baquero-Arnal, Pau
  • Jorge-Cano, Javier|||0000-0002-9279-6768
  • Silvestre Cerdà, Joan Albert|||0000-0003-2291-8296
  • Giménez Pastor, Adrián
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Sanchis Navarro, José Alberto|||0000-0002-2943-0990
  • Juan, Alfons|||0000-0002-9984-4072
[EN] The cascade approach to Speech Translation (ST) is based on a pipeline that concatenates an Automatic Speech Recognition (ASR) system followed by a Machine Translation (MT) system. Nowadays, state-of-the-art ST systems are populated with deep neural networks that are conceived to work in an offline setup in which the audio input to be translated is fully available in advance. However, a streaming setup defines a completely different picture, in which an unbounded audio input gradually becomes available and at the same time the translation needs to be generated under real-time constraints. In this work, we present a state-of-the-art streaming ST system in which neural-based models integrated in the ASR and MT components are carefully adapted in terms of their training and decoding procedures in order to run under a streaming setup. In addition, a direct segmentation model that adapts the continuous ASR output to the capacity of simultaneous MT systems trained at the sentence level is introduced to guarantee low latency while preserving the translation quality of the complete ST system. The resulting ST system is thoroughly evaluated on the real-life streaming Europarl-ST benchmark to gauge the trade-off between quality and latency for each component individually as well as for the complete ST system., The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement no. 761758 (X5Gon) and 952215 (TAILOR); the Government of Spain's research project Multisub, ref. RTI2018-094879-B-I00 (MCIU/AEI/FEDER,EU) and FPU scholarships FPU14/03981 and FPU18/04135; and the Generalitat Valenciana's research project Classroom Activity Recognition, ref. PROMETEO/2019/111 and predoctoral research scholarship ACIF/2017/055.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

The MLLP-UPV German-English Machine Translation System for WMT18

  • Iranzo-Sánchez, Javier
  • Baquero-Arnal, Pau
  • Martínez-Villaronga, Adrià
  • Garcés Díaz-Munío, Gonçal|||0000-0002-2594-5858
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Juan, Alfons|||0000-0002-9984-4072
[EN] This paper describes the statistical machine translation system built by the MLLP research group of Universitat Politècnica de València for the German¿English news translation shared task of the EMNLP 2018 Third Conference on Machine Translation (WMT18). We used an ensemble of Transformer architecture¿based neural machine translation systems. To train our system under ¿constrained¿ conditions, we filtered the provided parallel data with a scoring technique using character-based language models, and we added parallel data based on synthetic source sentences generated from the provided monolingual corpora., The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement no. 761758 (X5gon); the Spanish government's TIN2015-68326-R (MINECO/FEDER) research project MORE, university collaboration grant programme 2017-2018, and faculty training scholarship FPU13/06241; the Generalitat Valenciana's predoctoral research scholarship ACIF/2017/055; as well as the Universitat Politecnica de València's PAID-01-17 R&D support programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Europarl-ASR: A Large Corpus of Parliamentary Debates for Streaming ASR Benchmarking and Speech Data Filtering/Verbatimization

  • Garcés Díaz-Munío, Gonçal|||0000-0002-2594-5858
  • Silvestre Cerdà, Joan Albert|||0000-0003-2291-8296
  • Jorge-Cano, Javier|||0000-0002-9279-6768
  • Giménez Pastor, Adrián
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Sanchis Navarro, José Alberto|||0000-0002-2943-0990
  • Juan, Alfons|||0000-0002-9984-4072
  • Iranzo-Sánchez, Javier
  • Baquero-Arnal, Pau
  • Roselló, Nahuel
  • Pérez-González de Martos, Alejandro Manuel
[EN] We introduce Europarl-ASR, a large speech and text corpus of parliamentary debates including 1300 hours of transcribed speeches and 70 million tokens of text in English extracted from European Parliament sessions. The training set is labelled with the Parliament¿s non-fully-verbatim official transcripts, time-aligned. As verbatimness is critical for acoustic model training, we also provide automatically noise-filtered and automatically verbatimized transcripts of all speeches based on speech data filtering and verbatimization techniques. Additionally, 18 hours of transcribed speeches were manually verbatimized to build reliable speaker-dependent and speaker-independent development/test sets for streaming ASR benchmarking. The availability of manual non-verbatim and verbatim transcripts for dev/test speeches makes this corpus useful for the assessment of automatic filtering and verbatimization techniques. This paper describes the corpus and its creation, and provides off-line and streaming ASR baselines for both the speaker-dependent and speaker-independent tasks using the three training transcription sets. The corpus is publicly released under an open licence., [CA] "Europarl-ASR: Un extens corpus parlamentari de referència per a reconeixement de la parla i filtratge/literalització de transcripcions": Presentem Europarl-ASR, un extens corpus de veu i text de debats parlamentaris amb 1300 hores d'intervencions transcrites i 70 milions de paraules de text en anglés extrets de sessions del Parlament Europeu. Les transcripcions oficials del Parlament Europeu, no literals, s'han sincronitzat per a tot el conjunt d'entrenament. Com que l'entrenament de models acústics requereix transcripcions com més literals millor, també s'han inclòs transcripcions filtrades i transcripcions literalitzades de totes les intervencions, basades en tècniques de filtratge i literalització automàtics. A més, s'han inclòs 18 hores de transcripcions literals revisades manualment per definir dos conjunts de validació i avaluació de referència per a reconeixement automàtic de la parla en temps real, amb oradors coneguts i amb oradors desconeguts. Pel fet de disposar de transcripcions literals i no literals, aquest corpus és també ideal per a l'anàlisi de tècniques de filtratge i de literalització. En aquest article, es descriu la creació del corpus i es proporcionen mesures de referència de reconeixement automàtic de la parla en temps real i en diferit, amb oradors coneguts i amb oradors desconeguts, usant els tres conjunts de transcripcions d'entrenament. El corpus es fa públic amb una llicència oberta., This work has received funding from the EU's H2020 research and innovation programme under grant agreements 761758 (X5gon) and 952215 (TAILOR); the Government of Spain's research project Multisub (RTI2018-094879-B-I00, MCIU/AEI/FEDER,EU) and FPU scholarships FPU14/03981 and FPU18/04135; the Generalitat Valenciana's research project Classroom Activity Recognition (PROMETEO/2019/111) and predoctoral research scholarship ACIF/2017/055; and the Universitat Politecnica de València's ` PAID-01-17 R&D support programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Improved Hybrid Streaming ASR with Transformer Language Models

  • Baquero-Arnal, Pau
  • Iranzo-Sánchez, Javier
  • Jorge-Cano, Javier|||0000-0002-9279-6768
  • Giménez Pastor, Adrián
  • Silvestre Cerdà, Joan Albert|||0000-0003-2291-8296
  • Sanchis Navarro, José Alberto|||0000-0002-2943-0990
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Juan, Alfons|||0000-0002-9984-4072
[EN] Streaming ASR is gaining momentum due to its wide applicability, though it is still unclear how best to come close to the accuracy of state-of-the-art off-line ASR systems when the output must come within a short delay after the incoming audio stream. Following our previous work on streaming one-pass decoding with hybrid ASR systems and LSTM language models, in this work we report further improvements by replacing LSTMs with Transformer models. First, two key ideas are discussed so as to run these models fast during inference. Then, empirical results on LibriSpeech and TED-LIUM are provided showing that Transformer language models lead to improved recognition rates on both tasks. ASR systems obtained in this work can be seamlessly transfered to a streaming setup with minimal quality losses. Indeed, to the best of our knowledge, no better results have been reported on these tasks when assessed under a streaming setup., The research leading to these results has received funding from the European Union s Horizon 2020 research and innovation program under grant agreement no. 761758 (X5Gon); the Government of Spain s research project Multisub, ref. RTI2018-094879-B-I00 (MCIU/AEI/FEDER,EU); and the Generalitat Valenciana predoctoral research scholarship ACIF/2017/055
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

Direct Segmentation Models for Streaming Speech Translation

  • Iranzo-Sánchez, Javier
  • Baquero-Arnal, Pau
  • Giménez Pastor, Adrián
  • Silvestre Cerdà, Joan Albert|||0000-0003-2291-8296
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Juan, Alfons|||0000-0002-9984-4072
[EN] The cascade approach to Speech Translation (ST) is based on a pipeline that concatenates an Automatic Speech Recognition (ASR) system followed by a Machine Translation (MT) system. These systems are usually connected by a segmenter that splits the ASR output into, hopefully, semantically self-contained chunks to be fed into the MT system. This is specially challenging in the case of streaming ST, where latency requirements must also be taken into account. This work proposes novel segmentation models for streaming ST that incorporate not only textual, but also acoustic information to decide when the ASR output is split into a chunk. An extensive and thorough experimental setup is carried out on the Europarl-ST dataset to prove the contribution of acoustic information to the performance of the segmentation model in terms of BLEU score in a streaming ST scenario. Finally, comparative results with previous work also show the superiority of the segmentation models proposed in this work., The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement no. 761758 (X5Gon); the Government of Spain's research project Multisub, ref. RTI2018- 094879-B-I00 (MCIU/AEI/FEDER,EU), the Generalitat Valenciana's research project Classroom Activity Recognition, ref. PROMETEO/2019/111., FPU scholarship FPU18/04135; and the Generalitat Valencianas predoctoral research scholarship ACIF/2017/055. The authors wish to thank the anonymous reviewers for their criticisms and suggestions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Theoretical and Experimental Results for Multipactor Effect in Groove Gap Waveguide Bandpass Filters with Inductive Coupling Irises

  • Jorge-López, Alejandro|||0009-0004-9678-1813
  • Vague Cardona, José Joaquín|||0000-0001-5935-3116
  • Baquero Escudero, Mariano|||0000-0001-8772-5431
  • Taroncher Calduch, Mariam|||0000-0001-9068-1169
  • Vidal Pantaleoni, Ana|||0000-0002-3853-6260
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Asensio, Irene
  • Coves Soler, Ángela
  • San Blas Oltra, Ángel Antonio
[EN] This article presents the theoretical study and experimental validation of the multipactor (MP) effect in bandpass filters implemented in groove gap waveguide (GGW) technology. Such filters are based on rectangular cavities and inductive coupling irises, whose optimized dimensions (widths and lengths) are fixed between rows of metal pins. For the effective design of the considered GGW filter, an equivalent counterpart in standard rectangular waveguide (RW) technology will be first studied, using very efficient tools for computing its electrical response and MP discharge breakdown levels. Two prototypes of the GGW and RW bandpass filters, designed to operate at 17.5 GHz (for Ka-band satellite downlink applications), are manufactured for validation and comparison purposes. Both of them are made of aluminium material, whose properties (in terms of secondary electron emission) have also been measured, as well as considered in the prediction of MP threshold levels using available software tools. Proceeding in this way, an outstanding matching between all simulated and experimental results of the MP effect has been achieved., This work was supported in part by the Ministerio de Ciencia, Innovacion y Universidades (Spanish Government) through the Subprojects C41 and C43 of the Research and Development Project PID2022-136590OB through Fondo Europeo de Desarrollo Regional (FEDER), Unión Europea (UE), under Grant AEI/10.13039/501100011033; in part by the Project TED2021-129196B through Unión Europea NextGenerationEU/Plan de Recuperación, Transformación y Resiliencia (PRTR) under Grant 10.13039/501100011033; and in part by the Conselleria de Educación, Universidades y Empleo, Generalitat Valenciana, under Project CIAICO/2021/055.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Loop Pairing Method for Non-Linear Multivariable Control Systems Under a Multi-Objective Optimization Approach

  • Huilcapi-Subia, Victor
  • Reynoso Meza, Gilberto
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
[EN] In the multivariable control literature there are few techniques that face the problem of selecting suitable loop pairings in non-linear multivariable systems. Most techniques analyze the linearized system at a specific operating point. This paper proposes a new methodology to optimally and simultaneously select the loop pairings and the tuning of the parameters of the decentralized control by applying a multi-objective optimization approach directly on the non-linear system. The main contribution of this work is that the proposed methodology enables a detailed multi-dimensional analysis of the performances and trade-offs in the available loop pairings to control a multivariable non-linear system. The methodology is applied in this paper to three examples that analyze how the different types of loop pairings conflict. In one of the examples, the proposed methodology was applied first in the linearized system and later in the non-linear system. The results were contradictory and show how the application of loop pairing techniques for linear systems can be inaccurate when they are applied on a non-linear system previously linearized at an operating point. The following examples show that the operating point of a non-linear system, the design objectives of each multi-objective problem, as well as the designer¿s preferences have important roles in the selection of an optimal loop pairing, This work was supported in part by the Ministerio de Ciencia, Innovacion y Universidades, Spain, under Grant RTI2018-096904-B-I00, in part by the Direccio General de Ciencia i Investigacio, Generalitat Valenciana, Spain, under Grant AICO/2019/055, in part by the Conselho Nacional de Pesquisa e Desenvolvimento (CNPq), in part the Fundacao Araucaria (FAPPR) - Brazil under Grant 304066/2016-8-PQ2, Grant 437105/2018-0-Univ, and Grant PRONEX-042/2018, and in part by the Universidad Politecnica Salesiana, Ecuador, under Grant CB-755-2015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Evidences of spatial (angular) filtering of sound beams by sonic crystals

  • Picó Vila, Rubén|||0000-0003-3537-9658
  • Pérez Arjona, Isabel|||0000-0001-9010-6287
  • Sánchez Morcillo, Víctor José|||0000-0003-4766-1263
  • Staliünas, Kestutis
We report experimental evidences of spatial (angular) filtering of sound beams propagating through sonic crystals. We show that at specific frequencies of the incident wave the paraxial plane wave compo- nents of the beam can be efficiently transmitted through the crystal, whereas the components propagat- ing at large angles are strongly reflected or deflected (filtered out) by the crystal. The modification of the angular field distribution results in formation of sound beams of relatively high spatial quality., The work was financieall supported by Spanish Ministry of since and Innovation and European Union FEDER through projects FIS2011-29731-C02-01 and -02, Generalitat Valenciana through the procect GV/2011/2055 and the UPV through PAID-05-12.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Mid-infrared plasmonic inductors: Enhancing inductance with meandering lines

  • Torres, Victor
  • Ortuño Molinero, Rubén
  • Rodriguez-Ulibarri, Pablo
  • Navarro-Cia, Miguel
  • Beruete, Miguel
  • Sorolla, Mario
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
We present a mid-infrared inductor that when applied to an extraordinary transmission hole array produces a strong redshift of the resonant peak accompanied by an unprecedented enlargement of the operation bandwidth. The importance of the result is twofold: from a fundamental viewpoint, the direct applicability of equivalent circuit concepts borrowed from microwaves is demonstrated, in frequencies as high as 17 THz upholding unification of plasmonics and microwave concepts and allowing for a simplification of structure design and analysis; in practical terms, a broadband funnelling of infrared radiation with fractional bandwidth and efficiency as high as 97% and 48%, respectively, is achieved through an area less than one hundredth the squared wavelength, which leads to an impressive accessible strong field localization that may be of great interest in sensing applications., In memoriam Prof. Mario Sorolla. Effort sponsored by Spanish Government under contracts Consolider "Engineering Metamaterials" CSD2008-00066, TEC2011-28664-C01 and TEC2011-28664-C02. V. T. acknowledges funding from Universidad Publica de Navarra. P.R.-U. is sponsored by the Government of Navarra under funding program "Formacion de tecnologos" 055/01/11. M. N.-C. is supported by the Imperial College Junior Research Fellowship. M. B. acknowledges funding by the Spanish Government under the research contract program Ramon y Cajal RYC-2011-08221.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Multivariable controller design for the cooling system of a PEM fuel cell by considering nearly optimal solutions in a multi-objective optimization approach

  • Pajares-Ferrando, Alberto|||0000-0002-2036-2709
  • Blasco, Xavier|||0000-0002-9737-2833
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
  • Simarro Fernández, Raúl|||0000-0002-7311-2025
[EN] This paper presents a design for the multivariable control of a cooling system in a PEM (proton exchange membrane) fuel cell stack. This system is complex and challenging enough: interactions between variables, highly nonlinear dynamic behavior, etc. This design is carried out using a multiobjective optimization methodology. There are few previous works that address this problem using multiobjective techniques. Also, this work has, as a novelty, the consideration of, in addition to the optimal controllers, the nearly optimal controllers nondominated in their neighborhood (potentially useful alternatives). In the multiobjective optimization problem approach, the designer must make decisions that include design objectives; parameters of the controllers to be estimated; and the conditions and characteristics of the simulation of the system. However, to simplify the optimization and decision stages, the designer does not include all the desired scenarios in the multiobjective problem definition. Nevertheless, these aspects can be analyzed in the decision stage only for the controllers obtained with a much less computational cost. At this stage, the potentially useful alternatives can play an important role. These controllers have significantly different parameters and therefore allow the designer to make a final decision with additional valuable information. Nearly optimal controllers can obtain an improvement in some aspects not included in the multiobjective optimization problem. For example, in this paper, various aspects are analyzed regarding potentially useful solutions, such as (1) the influence of certain parameters of the simulator; (2) the sample time of the controller; (3) the effect of stack degradation; and (4) the robustness. Therefore, this paper highlights the relevance of this in-depth analysis using the methodology proposed in the design of the multivariable control of the cooling system of a PEM fuel cell. This analysis can modify the final choice of the designer., This study was supported in part by the Ministerio de Ciencia, Innovacion y Universidades (Spain) (grant no. RTI2018-096904-B-I00) and by the Generalitat Valenciana regional government through project AICO/2019/055.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Clothoid-Based Three-Dimensional Curve for Attitude Planning

  • Girbés, Vicent
  • Vanegas, Gloria
  • Leopoldo Armesto|||0000-0003-0979-4428
This work was supported by Generalitat Valenciana under the postdoctoral grant APOSTD/2017/055. The authors are also grateful to the financial support of Spanish Ministry of Economy and European Union, grant DPI2016-81002-R (AEI/FEDER, UE). Thanks to Sergio Garcia-Nieto and Franklin Samaniego for their help to setup the simulator.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Computing the Mean-Variance-Sustainability Nondominated Surface by ev-MOGA

  • Garcia-Bernabeu, Ana|||0000-0003-3181-7745
  • Salcedo-Romero-de-Ávila, José-Vicente|||0000-0003-1577-5039
  • Hilario Caballero, Adolfo|||0000-0002-3237-8652
  • Pla Santamaría, David|||0000-0003-1563-3997
  • Herrero Durá, Juan Manuel|||0000-0003-1914-7494
[EN] Despite the widespread use of the classical bicriteria Markowitz mean-variance framework, a broad consensus is emerging on the need to include more criteria for complex portfolio selection problems. Sustainable investing, also called socially responsible investment, is becoming a mainstream investment practice. In recent years, some scholars have attempted to include sustainability as a third criterion to better reflect the individual preferences of those ethical or green investors who are willing to combine strong financial performance with social benefits. For this purpose, new computational methods for optimizing this complex multiobjective problem are needed. Multiobjective evolutionary algorithms (MOEAs) have been recently used for portfolio selection, thus extending the mean-variance methodology to obtain a mean-variance-sustainability nondominated surface. In this paper, we apply a recent multiobjective genetic algorithm based on the concept of epsilon-dominance called ev-MOGA. This algorithm tries to ensure convergence towards the Pareto set in a smart distributed manner with limited memory resources. It also adjusts the limits of the Pareto front dynamically and prevents solutions belonging to the ends of the front from being lost. Moreover, the individual preferences of socially responsible investors could be visualised using a novel tool, known as level diagrams, which helps investors better understand the range of values attainable and the tradeoff between return, risk, and sustainability., This work was funded by "Ministerio de Economia y Competitividad" (Spain), research project RTI2018-096904B-I00, and "Conselleria de Educacion, Cultura y DeporteGeneralitat Valenciana" (Spain), research project AICO/2019/055
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental study on the dynamic behaviour of drones designed for racing competitions

  • Castiblanco Quintero, Jose Manuel
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Simarro Fernández, Raúl|||0000-0002-7311-2025
  • Salcedo-Romero-de-Ávila, José-Vicente|||0000-0003-1577-5039
[EN] Drones designed for racing usually feature powerful miniaturised electronics embedded in fairly light and strong geometric composite structures. The main objective of this article is to analyse the behaviour of various models of racing drones and their geometrical structures (airframes). Two approaches have been made: (i) an analysis of the information collected by a set of speed and time sensors located on an indoor race track and using a statistical technique (box and whiskers diagram) and (ii) an analysis of the know-how (flight sensations) of a group of racing pilots using a series of technical interviews on the behaviour of their drones. By contrasting these approaches, it has been possible to validate numerically the effects of varying the arm angles, as well as lengths, on a test race track and relate the geometry of these structures to racing behaviour, The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was partially supported by project RTI2018-096904-B-I00 from the Spanish Ministry of Economy, and by project AICO/2019/055 from Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Contribución de congreso (ConferenceOutput)

MLLP-VRAIN Spanish ASR Systems for the Albayzin-RTVE 2020 Speech-To-Text Challenge

  • Jorge-Cano, Javier|||0000-0002-9279-6768
  • Giménez Pastor, Adrián
  • Garcés Díaz-Munío, Gonçal|||0000-0002-2594-5858
  • Silvestre Cerdà, Joan Albert|||0000-0003-2291-8296
  • Civera Saiz, Jorge|||0000-0002-0963-0143
  • Sanchis Navarro, José Alberto|||0000-0002-2943-0990
  • Juan, Alfons|||0000-0002-9984-4072
  • Baquero-Arnal, Pau
  • Iranzo-Sánchez, Javier
  • Pérez-González de Martos, Alejandro Manuel
[EN] This paper describes the automatic speech recognition (ASR) systems built by the MLLP-VRAIN research group of Universitat Politecnica de València for the Albayzin-RTVE 2020 Speech-to-Text Challenge. The primary system (p-streaming_1500ms_nlt) was a hybrid BLSTM-HMM ASR system using streaming one-pass decoding with a context window of 1.5 seconds and a linear combination of an n-gram, a LSTM, and a Transformer language model (LM). The acoustic model was trained on nearly 4,000 hours of speech data from different sources, using the MLLP's transLectures-UPV toolkit (TLK) and TensorFlow; whilst LMs were trained using SRILM (n-gram), CUED-RNNLM (LSTM) and Fairseq (Transformer), with up to 102G tokens. This system achieved 11.6% and 16.0% WER on the test-2018 and test-2020 sets, respectively. As it is streaming-enabled, it could be put into production environments for automatic captioning of live media streams, with a theoretical delay of 1.5 seconds. Along with the primary system, we also submitted three contrastive systems. From these, we highlight the system c2-streaming_600ms_t that, following the same configuration of the primary one, but using a smaller context window of 0.6 seconds and a Transformer LM, scored 12.3% and 16.9% WER points respectively on the same test sets, with a measured empirical latency of 0.81+-0.09 seconds (mean+-stdev). This is, we obtained state-of-the-art latencies for high-quality automatic live captioning with a small WER degradation of 6% relative., [CA] En aquest article, es descriuen els sistemes de reconeixement automàtic de la parla (RAP) creats pel grup d'investigació MLLP-VRAIN de la Universitat Politecnica de València per a la competició Albayzin-RTVE 2020 Speech-to-Text Challenge. El sistema primari (p-streaming_1500ms_nlt) és un sistema de RAP híbrid BLSTM-HMM amb descodificació en temps real en una passada amb una finestra de context d'1,5 segons i una combinació lineal de models de llenguatge (ML) d'n-grames, LSTM i Transformer. El model acústic s'ha entrenat amb vora 4000 hores de parla transcrita de diferents fonts, usant el transLectures-UPV toolkit (TLK) del grup MLLP i TensorFlow; mentre que els ML s'han entrenat amb SRILM (n-grames), CUED-RNNLM (LSTM) i Fairseq (Transformer), amb 102G paraules (tokens). Aquest sistema ha obtingut 11,6 % i 16,0 % de WER en els conjunts test-2018 i test-2020, respectivament. És un sistema amb capacitat de temps real, que pot desplegar-se en producció per a subtitulació automàtica de fluxos audiovisuals en directe, amb un retard teòric d'1,5 segons. A banda del sistema primari, s'han presentat tres sistemes contrastius. D'aquests, destaquem el sistema c2-streaming_600ms_t que, amb la mateixa configuració que el sistema primari, però amb una finestra de context més reduïda de 0,6 segons i un ML Transformer, ha obtingut 12,3 % i 16,9 % de WER, respectivament, sobre els mateixos conjunts, amb una latència empírica mesurada de 0,81+-0,09 segons (mitjana+-desv). És a dir, s'han obtingut latències punteres per a subtitulació automàtica en directe d'alta qualitat amb una degradació del WER petita, del 6 % relatiu., The research leading to these results has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement no. 761758 (X5Gon); the Government of Spain¿s research project Multisub (ref. RTI2018-094879-B-I00, MCIU/AEI/FEDER,EU) and FPU scholarships FPU14/03981 and FPU18/04135; and the Generalitat Valenciana¿s research project Classroom Activity Recognition (ref. PROMETEO/2019/111) and predoctoral research scholarship ACIF/2017/055
Repositori Institucional UIB
Publication Artículo científico (JournalArticle)

Long-term grazing influences root-associated fungal communities in a common Mediterranean grass

  • Baraza, Elena
  • Borràs, Joshua
  • Gambra, Daniel
  • Capó, Miquel
  • Solano-Udina, Carlota
  • Perea, Ramón
[eng] Background and aims: Ungulates are integral to Mediterranean ecosystems, influencing vegetation dynamics and soil microbial communities. While previous studies have documented the effects of herbivory on the soil microbiome (e.g. nitrogen-fixation groups), the impacts on root-associated fungal communities and their role in plant responses to herbivory remain poorly understood. These interactions are vital for ecosystem functioning and deserve further investigation. Methods: To explore these interactions, we used Agrostis spp. as species model, a common grass genus, highly consumed by ungulates worldwide. Roots were sampled from areas with high ungulate activity (deer density of 25–40 ind/km2) and from adjacent 14-year ungulate exclosures to assess long-term changes in root-associated fungal communities. Additionally, Agrostis plants were grown in soils from these areas under greenhouse conditions to evaluate their regrowth capacity after simulated herbivory. Results: The fungal communities of the roots differed significantly between plants grown inside and outside the ungulate exclosures. Despite these differences, the regrowth capacity after simulated herbivory was not significantly affected by the soil origin (areas with and without herbivory). Plants grown in sterilized soils with recolonized fungal communities exhibited enhanced growth compared to those in untreated soils. Conclusions: The study demonstrates that ungulate herbivory alters root-associated fungal communities in Agrostis spp., yet plant growth remains unaffected, suggesting resilient plant-fungal interactions. Our findings show that microbial diversity alone may not predict ecosystem function, emphasizing the need to consider both taxonomic and functional dimensions of soil communities in conservation strategies for Mediterranean ecosystems.
Repositori Institucional UIB
Publication Artículo científico (JournalArticle)

Underground lag: fungal community and edaphic legacies after disturbance

  • Navarrete-López, Wilmer Dajhan
  • Molins, Arantzazu
  • Solarte, María Elena
  • Enrique-Paz, Camila
  • Borràs, Joshua
  • Bota, Josefina
  • Baraza, Elena
[eng] Páramos are neotropical mountain ecosystems that regulate water and store large amounts of carbon, but are increasingly degraded by agriculture and grazing. Although native vegetation often recolonizes after abandonment, belowground recovery remains poorly understood. We tested whether natural regeneration over contrasting recovery times yields parallel recovery of soil properties, arbuscular mycorrhizal fungi (AMF) abundance, and root-associated fungal community composition. We compared two naturally regenerating sites in the Cumbal páramo (Nariño, Colombia) representing 12 and 45 years since disturbance. We measured soil properties, quantified AMF root colonization and spore density, and profiled root-associated fungi using ITS metabarcoding. Soil organic matter and organic carbon showed no significant differences between sites, reaching comparable levels after 12 years of recovery. In contrast, soil fertility indicators increased with recovery time, with cation exchange capacity rising by ~8% and available phosphorus by ~21% at the long-recovery site. AMF colonization decreased with recovery time (51.2%–44.6%), whereas spore density did not differ between sites and was highly variable. Alpha diversity of the root-associated fungal community did not differ between sites. However, PERMANOVA showed that community composition varied with host plant species, recovery site, and their interaction, and redundancy analysis identified cation exchange capacity as the main edaphic correlate of community structure. Overall, results reveal a temporal decoupling between rapid vegetation/carbon recovery and slower, sometimes incomplete, recovery of soil fertility, highlighting root-associated fungi and AMF functional metrics as sensitive indicators of belowground recovery and supports their application in nature-based restoration and monitoring of high-mountain páramo ecosystems.
Repositori Institucional UIB
Publication Artículo científico (JournalArticle)

Phenotype–fitness relationships and pollen‐transfer efficiency of five orchid species with different pollination strategies

  • Capó, Miquel
  • Borràs, Joshua
  • Perelló-Suau, Sebastià
  • Rita, Juan
  • Cursach, Joana
[eng] Premise: Deceptive pollination, a fascinating mechanism that independently originated in several plant families for benefiting from pollinators without providing any reward, is particularly widespread among orchids. Pollination efficiency is crucial in orchids due to the aggregated pollen in a pollinarium, which facilitates pollen transfer and promotes cross‐pollination as pollinators leave after being deceived. Methods: In this study, we compiled data on reproductive ecology from five orchid species with different pollination strategies: three deceptive‐strategy species (shelter imitation, food deception, sexual deception), one nectar‐rewarding species, and one shelter‐imitation but spontaneously selfing species. We aimed to compare the reproductive success (female fitness: fruit set; male fitness: pollinarium removal) and pollination efficiency of species representing these strategies. We also investigated pollen limitation and inbreeding depression among the pollination strategies. Results: Male and female fitness were strongly correlated in all species but the spontaneously selfing species, which had high fruit set and low pollinarium removal. As expected, pollination efficiency was highest for the rewarding species and the sexually deceptive species. Rewarding species had no pollen limitation but did have high cumulative inbreeding depression; deceptive species had high pollen limitation and moderate inbreeding depression; and spontaneously selfing species did not have pollen limitation or inbreeding depression. Conclusions: Pollinator response to deception is critical to maintain reproductive success and avoid inbreeding in orchid species with non‐rewarding pollination strategies. Our findings contribute to a better understanding of the trade‐offs associated with different pollination strategies in orchids and highlight the importance of pollination efficiency in orchids due to the pollinarium.
Repositori Institucional UIB
Publication Artículo científico (JournalArticle)

New data for the alien vascular flora of Menorca (Balearic Islands, Spain)

  • Fraga, P.
  • Capó, M.
  • Rita, J.
  • Borràs, J.
  • Cursach, J.
[eng] Plant species introductions are a major threat to biodiversity worldwide, being especially harmful in island ecosystems. These introductions have increased significantly over the past decades, and understanding their ability to spread along the invaded areas is one of the key issues for optimising management actions. This study provides new findings on alien plants in Menorca, an island declared a Biosphere Reserve in 1993 located in the western Mediterranean Basin. In particular, we provide chorological data for 16 taxa: four of them are a novelty for the flora of the Balearic Islands ('Crassula tetragona' subsp. 'robusta', 'Gazania linearis', 'Portulaca grandiflora' and 'Turnera ulmifolia'), and nine are new for Menorca. Furthermore, we provide new chorological data from four other taxa previously cited in other studies. Overall, we include 13 new taxa for the alien flora of Menorca, reaching a total of 326 taxa that represent approximately 23% of the entire flora of the island.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publication Artículo científico (JournalArticle)

Association of blood-based DNA methylation markers with late-onset alzheimer disease: a potential diagnostic approach

  • Acha Santamaría, Blanca
  • Corroza, Jon
  • Sánchez Ruiz de Gordoa, Javier
  • Cabello, Carolina
  • Robles Solano, Maitane
  • Méndez López, Iván
  • Macías, Mónica
  • Zueco, Sara
  • Roldán, Miren
  • Urdánoz Casado, Amaya
  • Jericó Pascual, Ivonne
  • Erro Aguirre, María Elena
  • Alcolea, Daniel
  • Lleo, Alberto
  • Blanco Luquin, Idoia
  • Mendióroz Iriarte, Maite
Background and Objectives: There is an urgent need to identify novel noninvasive biomarkers for Alzheimer disease (AD) diagnosis. Recent advances in blood-based measurements of phosphorylated tau (pTau) species are promising but still insufficient to address clinical needs. Epigenetics has been shown to be helpful to better understand AD pathogenesis. Epigenetic biomarkers have been successfully implemented in other medical disciplines, such as oncology. The objective of this study was to explore the diagnostic accuracy of a blood-based DNA methylation marker panel as a noninvasive tool to identify patients with late-onset Alzheimer compared with age-matched controls. Methods: A case-control study was performed. Blood DNA methylation levels at 46 cytosine-guanine sites (21 genes selected after a comprehensive literature search) were measured by bisulfite pyrosequencing in patients with “probable AD dementia” following National Institute on Aging and the Alzheimer's Association guidelines (2011) and age-matched and sex-matched controls recruited at Neurology Department-University Hospital of Navarre, Spain, selected by convenience sampling. Plasma pTau181 levels were determined by Simoa technology. Multivariable logistic regression analysis was performed to explore the optimal model to discriminate patients with AD from controls. Furthermore, we performed a stratified analysis by sex. Results: The final study cohort consisted of 80 patients with AD (age: median [interquartile range] 79 [11] years; 58.8% female) and 100 cognitively healthy controls (age 77 [10] years; 58% female). A panel including DNA methylation levels at NXN, ABCA7, and HOXA3 genes and plasma pTau181 significantly improved (area under the receiver operating characteristic curve 0.93, 95% CI 0.89–0.97) the diagnostic performance of a single pTau181-based model, adjusted for age, sex, and APOE ɛ4 genotype. The sensitivity and specificity of this panel were 83.30% and 90.00%, respectively. After sex-stratified analysis, HOXA3 DNA methylation levels showed consistent association with AD. Discussion: These results highlight the potential translational value of blood-based DNA methylation biomarkers for noninvasive diagnosis of AD. Registration Information: Research Ethics Committee of the University Hospital of Navarre (PI17/02218)., Spanish Government through grants from the Institute of Health Carlos III (FIS PI17/02218), jointly funded by the European Regional Development Fund (ERDF), European Union, A way of shaping Europe; the Department of Industry of Government of Navarra (PI058 iBEAS-Plus and PI055 iBEAS-Plus); Institute of Health Carlos III (FIS PI20/01330 and AC19/00103 to AL) and CIBERNED (Program 1, Alzheimer Disease). The project leading to these results has received funding from la Caixa Foundation (ID 100010434) co-funded by Fundación Luzón (HR20-01109_BIOP-AD) under the project code LCF/PR/PR15/51100006.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

OK, thanks! A new mutualism between Chlamydomonas and methylobacteria facilitates growth on amino acids and peptides

  • Calatrava, Victoria
  • Hom, Erik F.Y.
  • Llamas, Ángel
  • Fernández, Emilio
  • Galván, Aurora
Nitrogen is a key nutrient for land plants and phytoplankton in terrestrial and aquatic ecosystems. The model alga Chlamydomonas reinhardtii can grow efficiently on several inorganic nitrogen sources (e.g. ammonium, nitrate, nitrite) as well as many amino acids. In this study, we show that Chlamydomonas is unable to use proline, hydroxyproline and peptides that contain these amino acids. However, we discovered that algal growth on these substrates is supported in association with Methylobacterium spp., and that a mutualistic carbon–nitrogen metabolic exchange between Chlamydomonas and Methylobacterium spp. is established. Specifically, the mineralization of these amino acids and peptides by Methylobacterium spp. produces ammonium that can be assimilated by Chlamydomonas, and CO2 photosynthetically fixed by Chlamydomonas yields glycerol that can be assimilated by Methylobacterium. As Chlamydomonas is an algal ancestor to land plants and Methylobacterium is a plant growth-promoting bacterium, this new model of mutualism may facilitate insights into the ecology and evolution of plant–bacterial interactions and design principles of synthetic ecology.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publication Artículo científico (JournalArticle)

Nitrogen scavenging from amino acids and peptides in the model alga Chlamydomonas reinhardtii. The role of extracellular l-amino oxidase

  • Calatrava, Victoria
  • Hom, Erik F.Y.
  • Llamas, Ángel
  • Fernández, Emilio
  • Galván, Aurora
Phytoplankton live under constantly changing environments in which concentrations of inorganic nitrogen can be limiting but organic nitrogen sources (urea, amino acids or peptides) are available. Understanding how algae, as primary producers, assimilate organic nitrogen is of eco-physiological importance although such studies are rare. Given genetic tractability, the green microalga Chlamydomonas reinhardtii is an excellent model system for elucidating amino acid assimilation by algal species. This alga can extracellularly deaminate most amino acids using a l-Amino acid Oxidase (LAO1), which generates ammonium that can then be taken up as a source of nitrogen. In this work, we have used lao1 mutant strains to investigate the impact of the absence of this enzyme on C. reinhardtii growth using amino acids and di-/tri-peptides as sole nitrogen sources. Our results show that LAO1 enzyme is crucial for growth on most proteinogenic amino acids and peptides by this alga. We present findings from an analysis of algal genomes that reveal a new evolutionary branch for algal l-amino acid oxidase genes (ALAAO) that includes Rhodophyta, Alveolata, Heterokonta, Haptophyta, and Dinophyta species. Interestingly, C. reinhardtii appears to be the only green algal that contains an ALAAO homolog, and we present a hypothesis about the possible origins of ALAAO genes in algae based on a comparative analysis of currently available and assembled algal genomes.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Characterization of Begomoviruses Sampled during Severe Epidemics in Tomato Cultivars Carrying the Ty-1 Gene

  • Torre, Covadonga
  • Donaire, Livia
  • Gómez-Aix, Cristina
  • Juárez, Miguel
  • Peterschmitt, Michel
  • Urbino, Cica
  • Hernando Saiz, Yolanda
  • Agüero González, Jesús
  • Aranda, Miguel A.
Tomato yellow leaf curl virus (TYLCV, genus Begomovirus, family Geminiviridae) is a major species that causes a tomato disease for which resistant tomato hybrids (mainly carriers of the Ty-1/Ty-3 gene) are being used widely. We have characterized begomoviruses severely affecting resistant tomato crops in Southeast Spain. Circular DNA was prepared from samples by rolling circle amplification, and sequenced by massive sequencing (2015) or cloning and Sanger sequencing (2016). Thus, 23 complete sequences were determined, all belonging to the TYLCV Israel strain (TYLCV-IL). Massive sequencing also revealed the absence of other geminiviral and beta-satellite sequences. A phylogenetic analysis showed that the Spanish isolates belonged to two groups, one related to early TYLCV-IL isolates in the area (Group 1), and another (Group 2) closely related to El Jadida (Morocco) isolates, suggesting a recent introduction. The most parsimonious evolutionary scenario suggested that the TYLCV isolates of Group 2 are back recombinant isolates derived from TYLCV-IS76, a recombinant virus currently predominating in Moroccan epidemics. Thus, an infectious Group 2 clone (TYLCV-Mu15) was constructed and used in in planta competition assays against TYLCV-IS76. TYLCV-Mu15 predominated in single infections, whereas TYLCV-IS76 did so in mixed infections, providing credibility to a scenario of co-occurrence of both types of isolates., Research in M.A.A., C.U. and M.P labs was funded by the Ministry of Economy, Industry, and Competitiveness of Spain, grant number PCIN-2017-055, and Agence Nationale de la Recherche of France, respectively, both within the ERANET-ARIMNet2 (ref. 302) program. J.A. and C.G.-A. were recipients of grants PTQ-13-05882 and PTQ-15-07646, respectively, from the Torres-Quevedo program (Ministry of Economy, Industry and Competitiveness; Spain), and C.T. of fellowship DI-14-06825 from the Industrial Doctoral program (Ministry of Economy, Industry, and Competitiveness, Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In situ hybridization for the localization of two pepino mosaic virus isolates in mixed infections

  • Gómez-Aix, Cristina
  • Alcaide Cabello, Cristina
  • Gómez, Pedro
  • Aranda, Miguel A.
  • Sánchez-Pina, M. Amelia
In situ hybridization (ISH) is an informative and relatively accessible technique for the localization of viral genomes in plant tissue and cells. However, simultaneous visualization of related plant viruses in mixed infections may be limited by the nucleotide similarity in the genomes and the single chromogenic detection over the same sample preparation. To address this issue, we used two Pepino mosaic virus isolates and performed ISH over consecutive serial cross-sections of paraffin-embedded leaf samples of single and mixed infected Nicotiana benthamiana plants. Moreover, the probe design was optimized to reduce cross-hybridisation, and co-localization was based on the overlapping of consecutive cross-sections from mixed infected leaves; thus, our results showed that both Pepino mosaic virus isolates co-localized in the same leaf tissue. In turn, both isolates were localized in the cytoplasm of the same cells. These results provide valuable information for studying mixed infections in plants by using a simple ISH procedure that is accessible to any pathology laboratory., P.G. and M.A.A. acknowledge funding from MINECO (grants AGL2014-59556-R and PCIN-2017-055, the latter within the ERANET-ARIMNet2 (ref. 302) program), and C.A. was supported by funding from the Ministry of Industry, Economy and Competitiveness (MINECO, Spain) within the PhD programme grant (FPU16/02569)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Dye giant absorption and light confinement effects in porous bragg microcavities

  • Oliva-Ramírez, Manuel
  • Gil-Rostra, J.
  • Simonsen, Adam C.
  • Yubero, Francisco
  • González-Elipe, Agustín R.
This work presents a simple experimental procedure to probe light confinement effects in photonic structures. Two types of porous 1D Bragg microcavities with two resonant peaks in the reflection gap were prepared by physical vapor deposition at oblique angle configurations and then infiltrated with dye solutions of increasing concentrations. The unusual position shift and intensity drop of the transmitted resonant peak observed when it was scanned through the dye absorption band have been accounted for by the effect of the light trapped at their optical defect layer. An experimentally observed giant absorption of the dye molecules and a strong anomalous dispersion in the refractive index of the solution are claimed as the reasons for the observed variations in the Bragg microcavity resonant feature. Determining the giant absorption of infiltrated dye solutions is proposed as a general and simple methodology to experimentally assess light trapping effects in porous photonic structures., The authors thank the European Regional Development Funds Program (EU-FEDER) and the MINECO-AEI (Projects MAT2013-40852-R, 201560E055, and MAT2016-79866-R and network MAT2015-69035-REDC) for financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanostructural analysis of porous oblique angle deposited multilayer systems by grazing-incidence small-angle x-ray scattering

  • Oliva-Ramírez, Manuel
  • López-Santos, Carmen
  • Yubero, Francisco
  • González-Elipe, Agustín R.
This work reports a thorough characterization analysis of various porous thin film multilayers by means of grazing‐incidence small‐angle X‐ray scattering (GISAXS). Alternated TiO2/SiO2 nanocolumnar layers deposited at oblique angles are fabricated in slanted, chiral, and zig‐zag configurations by rotating azimuthally the substrate from one layer to the next. Multilayer systems formed by the stacking of 3 and 15 alternant thin films of these two oxides are morphologically characterized by scanning electron microscopy (SEM) and structurally by GISAXS. This technique has provided a means to determine various vertical and lateral correlation lengths and to assess the anisotropic electron density distribution along the structural elements existing in the multilayers. This information can be systematically used to account for the actual arrangement of nanostructural elements in multilayer systems., This work had financial support by the European Regional Development Funds program (EU‐FEDER) and the MINECO‐AEI (Projects 201560E055 and MAT2016‐79866‐R and network MAT2015‐69035‐REDC). MINECO/ICTI2013-2016/MAT2016‐79866‐R MINECO/ICTI2013-2016/MAT2015‐69035‐REDC
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Microstructural engineering and use of efficient poison resistant Au-doped Ni-GDC ultrathin anodes in methane-fed solid oxide fuel cells

  • García-García, Francisco J.
  • Yubero, Francisco
  • González-Elipe, Agustín R.
  • Lambert, R.M.
Ultrathin porous solid oxide fuel cell (SOFC) anodes consisting of nickel-gadolinia-doped-ceria (Ni-GDC) cermets with a unique porous micro-columnar architecture with intimate contact between the GDC and the Ni phases were made by magnetron sputtering at an oblique deposition angle and characterised in detail by a variety of methods prior to use in hydrogen or methane-fuelled SOFCs. These Ni-GDC anodes exhibited excellent transport properties, were robust under thermal cycling and resistant to delamination from the underlying yttria-stabilised zirconia electrolyte. Similarly prepared Au-doped Ni-GDC anodes exhibited the same morphology, porosity and durability. The gold associated exclusively with the Ni component in which it was present as a surface alloy. Strikingly, whatever their treatment, a substantial amount of Ce persisted in the anodes, even after operation at 800 °C under fuel cell conditions. With hydrogen as fuel, the un-doped and Au-doped Ni-GDC anodes exhibited identical electrochemical performances, comparable to that of much thicker commercial state-of-the-art Ni-GDC anodes. However, under steam reforming conditions with CH/HO mixtures the behaviour of the Au-doped Ni-GDC anodes were far superior, exhibiting retention of good power density and dramatically improved resistance to deactivation by carbon deposition. Thus two distinct beneficial effects contributed to overall performance: persistence of Ce in the working anodes could induce a strong metal-support interaction with Ni that enhanced the catalytic oxidation of methane, while formation of a Ni–Au surface alloy that inhibited carbonisation and poisoning of the active nickel surface., The research leading to these results has received funding from the European Union's Seventh Framework Programme (FP7/2007-2013) for the Fuel Cells and Hydrogen Joint Technology Initiative under the T-CELL project with grant agreement no 298300. Support from a MINECO (Spain), grants no MAT2016-79866-R (AEI/FEDER, UE) and 201560E055, is also acknowledged. MINECO/ICTI2013-2016/MAT2016-79866-R
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In situ monitoring of the phenomenon of electrochemical promotion of catalysis

  • Espinós, J.P.
  • Rico, Víctor J.
  • González-Cobos, J.
  • Sánchez-Valencia, J. R.
  • Pérez-Dieste, Virginia
  • Escudero, C.
  • de Lucas-Consuegra, A.
  • González-Elipe, Agustín R.
In this work we investigate by in-situ near-ambient pressure photoemission (NAPP) spectroscopy the phenomenon of Electrochemical Promotion of Catalysis (EPOC). We studied the reduction and diffusion kinetics of alkaline ions in a solid electrolyte cell formed by a nickel electrode supported on K-β-alumina electrolyte. Experiments in ultra-high vacuum and in the presence of steam showed that the amount of potassium atoms supplied to the surface is probably affected by nickel electronic modifications induced by adsorbed OH groups. It was also deduced that part of the segregated potassium would be adsorbed at inner interfaces where it would be inaccessible to the photoelectron analyzer. A migration mechanism of the promoter is proposed consisting in: (i) the electrochemical reduction of the alkali ions (potassium) at the Ni/solid electrolyte/gas interface; (ii) the spillover of potassium atoms onto the Ni gas-exposed surface; and (iii) the diffusion of potassium atoms to Ni inner grain boundary interfaces., The authors thank the European Regional Development Funds program (EU-FEDER) and the MINECO-AEI (Projects MAT2013-40852-R, 201560E055 and MAT2016-79866-R) for financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Both Mature Patches and Expanding Areas of Juniperus thurifera Forests Are Vulnerable to Climate Change But for Different Reasons

  • Acuña-Míguez, Belén
  • Valladares Ros, Fernando
  • Martín-Forés, Irene
© 2020 by the authors., Research Highlights: Water use efficiency (WUE) varied along a gradient of Juniperus thurifera (L.) forest expansion, being higher in recently colonised areas. Background and Objectives: WUE is a classic physiological process of plants that reflects the compromise between carbon assimilation and water loss and has a profound influence on their performance in water-limited environments. Forest expansion in Mediterranean regions associated with land abandonment can influence the WUE of plants due to the existence of two opposing gradients: one of favourable–unfavourable environmental conditions and another one of increased–decreased intraspecific competition, the former increasing and the latter decreasing towards the expanding front. The main objective of this study was to elucidate how the WUE of Juniperus thurifera varied along the stages of forest expansion and to provide insight on how this variation is influenced by intraspecific competition and abiotic factors. Materials and Methods: Seventeen plots at different distances from the mature forest core were selected at three sites located in the centre of the Iberian Peninsula. For 30 individuals within each plot, we measured biometric characteristics, age, tree vigour, and C/N ratio in leaves, and the leaf carbon isotope signature (δ13C (‰)) as a proxy for WUE. Around each individual, we scored the percentage cover of bare soil, stoniness, conspecifics, and other woody species. Results: WUE of J. thurifera individuals varied along the forest expansion gradient, being greater for the individuals at the expanding front than for those at the mature forest. WUE was influenced by the cover of conspecifics, tree age, and C/N ratio in leaves. This pattern reveals that less favourable environmental conditions (i.e., rocky soils and higher radiation due to lower vegetation cover) and younger trees at the expanding front are associated with increased WUE. The increased cover of conspecifics decreases irradiance at the mature forest, involving milder stress conditions than at the expanding front. Conclusions: Lower WUE in mature forests due to more favourable conditions and higher WUE due to abiotic stress at expanding fronts revealed high constraints on water economy of this tree species in these two contrasting situations. Climate change scenarios bringing increased aridity are a serious threat to Juniperus thurifera forests, affecting both mature and juvenile populations although in different ways, which deserve further research to fully unveil., This study was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) grant: SPONFOREST (BiodivERsA3-2015-58, PCIN-2016-055), COMEDIAS (CGL2017-83170-R), FPI fellowship to BAM (PRE2018-083584), and Comunidad de Madrid grant: REMEDINAL TE (Ref. TE-CM. S2018/EMT-4338, 2019–2023-Comunidad de Madrid)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Alien plants alter the growth form ratio and structure of Australian grasslands

  • Guerin, Greg R.
  • Martín-Forés, Irene
  • Munroe, Samantha E.M.
  • Sparrow, Ben
  • Loewe, Andrew J.
[Questions]: Niche complementarity is often invoked to explain co-existence between native and alien plant species in grasslands. However, positive correlations between native and alien plant diversity observed in recent studies could mask the displacement of particular native species and functional groups or the negative effects of particular alien species. We asked: do alien species alter the species composition or proportions of growth forms in grasslands? Do particular alien species decrease native plant diversity?. [Location]: South Australian grasslands. [Methods]: We performed RDA ordination on growth form abundances or Hellinger-transformed species abundances obtained from plot-based surveys, constrained by alien species richness and cumulative cover. Control variables (climate, soil, land use and geographic space) were partialled out. We related individual alien species abundances to native richness, diversity and cover. We tested for functional differences between coexisting growth forms using trait hypervolumes. Results: While alien richness and cover explained just 2% of variance in native species composition (control variables 17%), aliens explained 18% of variance in native growth form abundance (control variables 33%), and were associated with increased herb and grass cover. Few individual alien species were associated with strong negative or positive differences in native richness, diversity or cover: correlations followed a Gaussian distribution with near-zero mean. Trait hypervolumes differed between native and alien herbs with an overlap of 0.44, indicating substantial, but not complete, functional differences., [Conclusions]: Given environmental context, alien cover was a good predictor of native herb and grass abundance relative to woody growth forms, but not of species composition per se. While the direction of causality is equivocal, aliens may facilitate native grasses and herbs, and niche complementarity may be involved. Due to functional redundancy across the species pool, the resulting species composition appears to be spatially contingent. Importantly for management, we identify alien species associated with reduced native diversity., TRY is currently supported by DIVERSITAS/Future Earth and the German Centre for Integrative Biodiversity Research (iDiv) Halle‐Jena‐Leipzig. SPONFOREST (BiodivERsA3‐2015‐58, PCIN‐2016‐055), COMEDIAS FEDER/Ministerio de Ciencia, Innovación y Universidades – Agencia Estatal de Investigación (CGL2017‐83170‐R), and REMEDINAL (Comunidad de Madrid grant REMEDINAL TE‐CM S2018/EMT‐4338) supported IMF.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A super-Earth on a close-in orbit around the M1V star GJ 740: A HADES and CARMENES collaboration

  • Toledo-Padrón, B.
  • Suárez Mascareño, A.
  • González Hernández, Jonay I.
  • Rebolo López, Rafael
  • Pinamonti, M.
  • Perger, M.
  • Scandariato, G.
  • Damasso, M.
  • Sozzetti, Alessandro
  • Maldonado, J.
  • Desidera, S.
  • Ribas, Ignasi
  • Micela, Giusi
  • Affer, L.
  • González-Álvarez, E.
  • Leto, G.
  • Pagano, Isabella
  • Zanmar Sánchez, R.
  • Giacobbe, P.
  • Herrero, Enrique
  • Morales, Juan Carlos
  • Amado, Pedro J.
  • Caballero, J. A.
  • Quirrenbach, Andreas
  • Reiners, Ansgar
  • Zechmeister, Mathias
Context. M-dwarfs have proven to be ideal targets for planetary radial velocity (RV) searches due to their higher planet-star mass contrast, which favors the detection of low-mass planets. The abundance of super-Earth and Earth-like planets detected around this type of star motivates further such research on hosts without reported planetary companions. Aims. The HADES and CARMENES programs are aimed at carrying out extensive searches of exoplanetary systems around M-type stars in the northern hemisphere, allowing us to address, in a statistical sense, the properties of the planets orbiting these objects. In this work, we perform a spectroscopic and photometric study of one of the program stars (GJ 740), which exhibits a short-period RV signal that is compatible with a planetary companion. Methods. We carried out a spectroscopic analysis based on 129 HARPS-N spectra taken over a time span of 6 yr combined with 57 HARPS spectra taken over 4 yr, as well as 32 CARMENES spectra taken during more than 1 yr, resulting in a dataset with a time coverage of 10 yr. We also relied on 459 measurements from the public ASAS survey with a time-coverage of 8 yr, along with 5 yr of photometric magnitudes from the EXORAP project taken in the V, B, R, and I filters to carry out a photometric study. Both analyses were made using Markov chain Monte Carlo simulations and Gaussian process regression to model the activity of the star. Results. We present the discovery of a short-period super-Earth with an orbital period of 2.37756-0.00011+0.00013 d and a minimum mass of 2.96-0.48+0.50 M . We offer an update to the previously reported characterization of the magnetic cycle and rotation period of the star, obtaining values of Prot = 35.563 ± 0.071 d and Pcycle = 2800 ± 150 d. Furthermore, the RV time series exhibits a possibly periodic long-term signal, which might be related to a Saturn-mass planet of ~100 M . © ESO 2021., B.T.P. acknowledges Fundación La Caixa for the financial support received in the form of a Ph.D. contract. A.S.M. acknowledges financial support from the Spanish Ministry of Science and Innovation (MICINN) under the 2019 Juan de la Cierva Programme. J.I.G.H. acknowledges financial support from Spanish MICINN under the 2013 Ramón y Cajal program RYC-2013-14875. B.T.P., A.S.M., J.I.G.H. and R.R. acknowledge financial support from the Spanish MICINN AYA2017-86389-P. I.R. and M.Pe. acknowledge support from the Spanish MICINN and the Fondo Europeo de Desarrollo Regional (FEDER) through grant PGC2018-098153-B-C33, as well as the support of the Generalitat de Catalunya/CERCA program. G.A.P.S. acknowledges support from INAF through the Progetti Premiali funding scheme of the Italian Ministry of Education, University, and Research. G.A.P.S. acknowledges financial support from Progetto Premiale 2015 FRONTIERA (OB.FU. 1.05.06.11) funding scheme of the Italian Ministry of Education, University, and Research. G.S. acknowledges the funding support from Italian Space Agency (ASI) regulated by “Accordo ASI-INAF n. 2013-016-R.0 del 9 luglio 2013 e integrazione del 9 luglio 2015”. This research has received financial support from the agreement ASI-INAF n.2018-16-HH.0. The results of this paper were based on observations made with the Italian Telescopio Nazionale Galileo (TNG), operated on the island of La Palma by the INAF-Fundación Galileo Galilei at the Roque de Los Muchachos Observatory of the Instituto de Astrofísica de Canarias (IAC); observations made with the HARPS instrument on the ESO 3.6-m telescope at La Silla Observatory (Chile); and observations made with the CARMENES instrument. CARMENES is an instrument for the Centro Astronómico Hispano-Alemán de Calar Alto (CAHA, Almería, Spain). CARMENES is funded by the German Max-Planck-Gesellschaft (MPG), the Spanish Consejo Superior de Investiga-ciones Científicas (CSIC), the European Union through FEDER/ERF FICTS-2011-02 funds, and the members of the CARMENES Consortium (Max-Planck-Institut für Astronomie, Instituto de Astrofísica de Andalucía, Landessternwarte Königstuhl, Institut de Ciències de l’Espai, Insitut für Astrophysik Göttingen, Universidad Complutense de Madrid, Thüringer Landessternwarte Tautenburg, Instituto de Astrofísica de Canarias, Hamburger Sternwarte, Centro de Astrobi-ología and Centro Astronómico Hispano-Alemán), with additional contributions by the Spanish MICINN through projects RYC2013-14875, AYA2015-69350-C3-2-P, AYA2016-79425-C3-1/2/3-P, ESP2016-80435-C2-1-R, ESP2017-87143-R, ESP2017-87676-C05-1/2/5-R, and AYA2017-86389-P, the German Science Foundation through the Major Research Instrumentation Program and DFG Research Unit FOR2544 “Blue Planets around Red Stars”, the Klaus Tschira Stiftung, the states of Baden-Württemberg and Niedersachsen, and by the Junta de Andalucía. This paper made use of the IAC Supercomputing facility HTCon-dor (http://research.cs.wisc.edu/htcondor/), partly financed by the MICINN with FEDER funds, code IACA13-3E-2493. This research has made use of the NASA Exoplanet Archive, which is operated by the California Institute of Technology, under contract with the National Aeronautics and Space Administration under the Exoplanet Exploration Program. This paper makes use of data from the first public release of the WASP data (Butters et al. 2010) as provided by the WASP consortium and services at the NASA Exoplanet Archive, which is operated by the California Institute of Technology, under contract with the National Aeronautics and Space Administration under the Exoplanet Exploration Program. This work has made use of data from the European Space Agency (ESA) mission Gaia (https://www.cosmos.esa.int/gaia), processed by the Gaia Data Processing and Analysis Consortium (DPAC, https://www. cosmos.esa.int/web/gaia/dpac/consortium). Funding for the DPAC has been provided by national institutions, in particular, the institutions participating in the Gaia Multilateral Agreement., With funding from the Spanish government through the Severo Ochoa Centre of Excellence accreditation SEV-2017-0709., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Research data Set de datos (Dataset)

Data from: Spontaneous forest regrowth in South-West Europe: consequences for nature’s contributions to people

  • Martín-Forés, Irene
  • Magro, Sandra
  • Bravo-Oviedo, Andrés
  • Alfaro-Sánchez, Raquel
  • Espelta, Josep Maria
  • Frei, Theresa
  • Valdés-Correcher, Elena
  • Rodríguez Fernández-Blanco, Carmen
  • Winkel, Georg
  • Gerzabek, Gabriel
  • Hampe, Arndt
  • Valladares Ros, Fernando
[Methods] The dataset was collected by four different teams who took part in the project. It consisted on four case studies of forest regrowth (including expansion and densification) after rural abandonment with contrasting ecological and societal contexts. The study took place in Spain and France. Two landscapes are located in rural areas undergoing human exodus and forest expansion and densification; the other two, in peri-urban areas with intense land use and forest densification but negligible expansion. For each forest plot, we estimated variables related to ten out of the 18 main Nature's contributions to people (NCP) defined by the Intergovernmental Science-Policy Platform on Biodiversity and Ecosystem Services. Regulating and material NCP were addressed using variables measured in the field as proxies. Non-material NCP were studied through stakeholder interviews. Thus, this dataset contains data on NCP associated with forest regrowth of Juniperus thurifera L., Fagus sylvatica L., Quercus ilex L., and Quercus robur L stands. It includes a total of 65 study plots and 2,837 individual trees. The considered NCP included four regulating, three material, and three non-material NCP as well as one NCP common to all categories. The four regulating NCP were habitat creation and maintenance; pollination and dispersal of seeds and other propagules; regulation of climate through biological carbon (C) sequestration and storage; and regulation of detrimental organisms and biological processes. The two material NCP were energy; and medicinal, biochemical and genetic resources. The three non-material NCP were learning and inspiration; physical and psychological experience; and supporting identities. The NCP common to all categories was the maintenance of options, reflected in maintaining biodiversity (estimated in this case with the Shannon diversity index). The dataset contains information at both individual and plot level. Habitat creation and maintenance (NCP1) was calculated by computing the spatial connectivity of the plots in Q. ilex and Q. robur stands. It was inferred by calculating the percentage cover of broadleaved forest in a circular buffer (radius = 500 m) around each plot. Pollination and the dispersal of seeds and other propagules (NCP2) was estimated by counting all seedlings and saplings in each plot and divided them by the plot area to obtain the density of saplings per hectare. Climate regulation in terms of biological carbon (C) storage and sequestration (NCP4) was estimated by the overall C stock contained in the trees of the study plots. We calculated the total biomass per tree using species-specific allometric equations that combine the dbh and the height of the sampled trees. We also calculated the C stock per tree multiplying the obtained biomass by the percentage of C in each species. The regulation of detrimental organisms and biological processes (NCP10) was assessed using the percentage of invertebrate herbivory. For all except the J. thurifera case study, we determined herbivore damages by visually estimating the percentage of leaf area removed by invertebrates. Energy provision (NCP11) was understood as the production of biomass-based fuels such as fuelwood. We estimated biomass input from thick and medium branches (i.e. the tree parts normally employed as fuelwood) for each tree within plots. Biomass input from thick and medium branches was calculated from allometric equations specific for each species. The provision of medicinal, biochemical and genetic resources (NCP14) includes the production of plant genes and genetic information. In each plot we quantified gene diversity corrected for sample size as proxy for NCP14. The maintenance of options (NCP18) includes the benefits associated with species diversity. We scored woody species richness and abundance and computed the Shannon diversity index as proxy. Additionally, interviews regarding social perceptions related to learning and inspiration (NCP15), physical and psychological experiences (NCP16) and supporting identities (NCP17) were conducted at the case study level. Please notice that the social perception dataset is not uploaded to ensure data privacy policy. More information and detailed Methodology can be found in Martín-Forés et al. (2020) People and Nature, in both the main text and the Supplementary Material S1. [Usage Notes] Some values are missing because the methodology was adjusted according to each case study. For more information please read the detailed information provided by Martín-Forés et al. (2020) People and Nature, in both the main text and the Supplementary Material S1., [Context] European forests are expanding and becoming denser following the widespread abandonment of farmland and rural areas. Yet, little is known about the goods and services that spontaneous forest regrowth provide to people., [Aims] We assessed the changes in nature’s contributions to people (NCP) from spontaneous forest regrowth, i.e. forest expansion and densification, in South-West Europe., [Methods We investigated 65 forest plots in four different landscapes with contrasting ecological and societal contexts. Two landscapes are located in rural areas undergoing human exodus and forest expansion and densification; the other two, in peri-urban areas with intense land use and forest densification but negligible expansion. For each forest plot, we estimated variables related to ten out of the 18 main NCP defined by the Intergovernmental Science-Policy Platform on Biodiversity and Ecosystem Services (IPBES). Regulating and material NCP were addressed using variables measured in the field as proxies. Non-material NCP were studied through stakeholder interviews., [Results] Our results show across the cases that forest expansion and densification is generally associated with greater climate regulation and energy provision. Changes in other NCP, especially in non-material ones, were strongly context-dependent. The social perception of spontaneous forest regrowth was primarily negative in rural areas and more positive in peri-urban landscapes., [Conclusion] Passive restoration through spontaneous forest expansion and densification can enhance regulating and material NCP, especially when adaptive management is applied. To optimise NCP and to increase the societal awareness of and interest in spontaneous forest regrowth, the effects of this process should be analysed in close coordination with local stakeholders to unveil and quantify the many and complex trade-offs involved in rural or peri-urban social perceptions., BiodivERsA, Award: BiodivERsA3-2015-58. Agencia Estatal de Investigación, Award: PCIN-2016-055. Ministerio de Economía, Industria y Competitividad, Gobierno de España, Award: CGL2017-83170-R. Deutsche Forschungsgemeinschaft. BiodivERsA, Award: BiodivERsA3-2015-58., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Individual Choices of Wintering Areas Drive Adult Survival Heterogeneity in a Long-Lived Seabird

  • Genovart, Meritxell
  • Ramos, Raül
  • Igual, José Manuel
  • Sanz-Aguilar, Ana
  • Tavecchia, Giacomo
  • Rotger, Andreu
  • Militão, Teresa
  • Vicente-Sastre, Diego
  • García-Urdangarín, B.
  • Pradel, Roger
  • González-Solís, Jacob
  • Oro, Daniel
Seasonal migration has evolved as an adaptation for exploiting peaks of resource abundance and avoiding unfavourable climatic conditions. Differential migratory strategies and choices of wintering areas by long-distance migratory species may impose varying selective pressures and mortality risks with fitness consequences. Recently developed tracking technologies allow wintering movements of migratory species to be studied. However, these technologies typically involve a limited number of tracked individuals, which gives low statistical power for any robust estimate of survival probabilities. Additionally, when utilising geolocators, data become accessible only upon individual recapture, presenting a potential source of bias. We used multievent modelling to include information of 147 identified wintering tracks in the analysis of 1104 long-term individual capture histories (2000-2022) of migratory seabird Calonectris diomedea and then test if individual preferences for wintering areas may drive heterogeneity in adult survival. We also examined individual fidelity to wintering areas and tested if climatic and oceanographic conditions, as represented by the wNAO and SOI climatic indices, influenced survival and fidelity. The probability of fidelity to a wintering area was ca. 0.79. Annual changes between areas were influenced by environmental variability driven by the wNAO. Survival probability was influenced by the SOI and differed between wintering areas; these differences coupled with high wintering site fidelity, generated individual heterogeneity in adult survival. Our study reveals that, over the last two decades, some individuals wintered in less suitable areas, with nonnegligible consequences on adult survival, the parameter to which the population growth rate is most sensitive in long-lived species. Winter oceanographic conditions such as stormy weather or the proximity to upwellings probably play a relevant role in driving survival heterogeneity. Further research is needed to enhance our understanding of how the interlinked effects of climate, local selective pressures and individual condition shape population dynamics in migratory species., The collection of the long-term demographic data was partially supported by several grants from the Spanish Ministerio de Ciencia e innovación/AEI and EU-FEDER funds (PID2021-124731NB-I00, PID2020-117155GB-I00/AEI/ 10.13039/501100011033, CGL2017-85210-P, CGL2016-78530-R, PIE202230I133) and through the ‘Maria de Maeztu Centre of Excellence’ accreditation to IMEDEA (CSIC-UIB) (CEX2021-001198). RR was funded by postdoctoral contract RYC-2017-22,055 from the Ministerio de Ciencia, Innovación y Universidades, JGS was funded by an ICREA Academia award, and ASA received grant RYC-2017-22,796 funded by MCIN/AEI/ 10.13039/501100011033 and by ESF Investing in your future., With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001198)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Turning Mediterranean farmlands into priority habitats: natural expansion of Juniper woodlands after agricultural abandonment

  • Bentley, Laura
  • Forner, Alicia
  • Khoury, Sacha
  • Valladares, Fernando
  • Coomes, David A.
  • Martín-Forés, Irene
Aims: Natural woodland expansion into former agricultural land contributes to conservation and global reforestation goals. However, tree colonisation and woodland persistence depend on interactions among vegetation, land-use history and suitable microclimatic conditions. Understanding these drivers is essential for anticipating woodland expansion outcomes over large spatial and temporal scales. Methods: We combined airborne photogrammetry with field measurements to assess the long-term success of Juniperus thurifera woodlands—a Natura 2000 priority habitat—across a 20-km2 region of central Spain. A canopy height model, calibrated with field biomass data, was used to map juniper biomass, while time series land-cover maps estimated woodland age. This novel approach enabled evaluation of colonisation success using a space-for- time substitution along the expansion frontier. Results: Over the past 34 years, land cover has changed markedly, with agricultural land declining by 75% and open woodland tripling. Juniper stands have expanded from steep slopes onto flatter terrain and into areas with lower irradiance. Increasing dwarf-shrub density within stands reduced juniper biomass by up to 25% in the oldest woodlands. Higher solar exposure promoted faster biomass accumulation through time but limited biomass in younger stands. Contrarily, new stands under lower insolation showed greater biomass for their age, suggesting positive land-use legacies where drought stress was reduced. Conclusion: Overall, J. thurifera woodlands have expanded substantially over recent decades, yet growth constraints differ across the expansion front. With our innovative framework integrating high-resolution photogrammetry and field-based biomass models, our study underscores the interplay between local competition and abiotic factors in shaping woodland dynamics across space and time. This framework offers a valuable, scalable and transferable tool for monitoring and managing long-term ecosystem dynamics across larger spatial and temporal scales and informing habitat restoration and conservation planning under changing environmental conditions., Natural Environment Research Council (UK), Geophysical Equipment Facility, Ministerio de Economía y Competitividad (España), Comunidad de Madrid, Consejo Superior de Investigaciones Científicas (España), Generalitat Valenciana, European Union Center (US), Adelaide University, Council of Australasian University Librarians, Peer reviewed
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Experimental evaluation of ensemble classifiers for imbalance in Big Data

  • Juez Gil, Mario
  • Arnaiz González, Álvar
  • Rodríguez Diez, Juan José
  • García Osorio, César
Datasets are growing in size and complexity at a pace never seen before, forming ever larger datasets known as Big Data. A common problem for classification, especially in Big Data, is that the numerous examples of the different classes might not be balanced. Some decades ago, imbalanced classification was therefore introduced, to correct the tendency of classifiers that show bias in favor of the majority class and that ignore the minority one. To date, although the number of imbalanced classification methods have increased, they continue to focus on normal-sized datasets and not on the new reality of Big Data. In this paper, in-depth experimentation with ensemble classifiers is conducted in the context of imbalanced Big Data classification, using two popular ensemble families (Bagging and Boosting) and different resampling methods. All the experimentation was launched in Spark clusters, comparing ensemble performance and execution times with statistical test results, including the newest ones based on the Bayesian approach. One very interesting conclusion from the study was that simpler methods applied to unbalanced datasets in the context of Big Data provided better results than complex methods. The additional complexity of some of the sophisticated methods, which appear necessary to process and to reduce imbalance in normal-sized datasets were not effective for imbalanced Big Data., “la Caixa” Foundation, Spain, under agreement LCF/PR/PR18/51130007. This work was supported by the Junta de Castilla y León, Spain under project BU055P20 (JCyL/FEDER, UE) co-financed through European Union FEDER funds, and by the Consejería de Educación of the Junta de Castilla y León and the European Social Fund, Spain through a pre-doctoral grant (EDU/1100/2017).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

When is resampling beneficial for feature selection with imbalanced wide data?

  • Ramos Pérez, Ismael
  • Arnaiz González, Álvar
  • Rodríguez Diez, Juan José
  • García Osorio, César
This paper studies the effects that combinations of balancing and feature selection techniques have on wide data (many more attributes than instances) when different classifiers are used. For this, an extensive study is done using 14 datasets, 3 balancing strategies, and 7 feature selection algorithms. The evaluation is carried out using 5 classification algorithms, analyzing the results for different percentages of selected features, and establishing the statistical significance using Bayesian tests. Some general conclusions of the study are that it is better to use RUS before the feature selection, while ROS and SMOTE offer better results when applied afterwards. Additionally, specific results are also obtained depending on the classifier used, for example, for Gaussian SVM the best performance is obtained when the feature selection is done with SVM-RFE before balancing the data with RUS., “La Caixa” Foundation, under agreement LCF/PR/PR18/51130007. This work was also supported by the Junta de Castilla León under project BU055P20 (JCyL/FEDER, UE) and by the Ministry of Science and Innovation under project PID2020-119894GB-I00, co-financed through European Union FEDER funds .
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Approx-SMOTE: Fast SMOTE for Big Data on Apache Spark

  • Juez Gil, Mario
  • Arnaiz González, Álvar
  • Rodríguez Diez, Juan José
  • López Nozal, Carlos
  • García Osorio, César
One of the main goals of Big Data research, is to find new data mining methods that are able to process large amounts of data in acceptable times. In Big Data classification, as in traditional classification, class imbalance is a common problem that must be addressed, in the case of Big Data also looking for a solution that can be applied in an acceptable execution time. In this paper we present Approx-SMOTE, a parallel implementation of the SMOTE algorithm for the Apache Spark framework. The key difference with the original SMOTE, besides parallelism, is that it uses an approximated version of k-Nearest Neighbor which makes it highly scalable. Although an implementation of SMOTE for Big Data already exists (SMOTE-BD), it uses an exact Nearest Neighbor search, which does not make it entirely scalable. Approx-SMOTE on the other hand is able to achieve up to 30 times faster run times without sacrificing the improved classification performance offered by the original SMOTE., “La Caixa” Foundation, under agreement LCF/PR/PR18/51130007. This work was supported by the Junta de Castilla y León under project BU055P20 and by the Ministry of Science and Innovation of Spain under project PID2020-119894 GB-I00, co-financed through European Union FEDER funds. It also was supported through Consejería de Educación of the Junta de Castilla y León and the European Social Fund through a pre-doctoral grant (EDU/1100/2017). This material is based upon work supported by Google Cloud.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Rotation Forest for Big Data

  • Juez Gil, Mario
  • Arnaiz González, Álvar
  • Rodríguez Diez, Juan José
  • López Nozal, Carlos
  • García Osorio, César
The Rotation Forest classifier is a successful ensemble method for a wide variety of data mining applications. However, the way in which Rotation Forest transforms the feature space through PCA, although powerful, penalizes training and prediction times, making it unfeasible for Big Data. In this paper, a MapReduce Rotation Forest and its implementation under the Spark framework are presented. The proposed MapReduce Rotation Forest behaves in the same way as the standard Rotation Forest, training the base classifiers on a rotated space, but using a functional implementation of the rotation that enables its execution in Big Data frameworks. Experimental results are obtained using different cloud-based cluster configurations. Bayesian tests are used to validate the method against two ensembles for Big Data: Random Forest and PCARDE classifiers. Our proposal incorporates the parallelization of both the PCA calculation and the tree training, providing a scalable solution that retains the performance of the original Rotation Forest and achieves a competitive execution time (in average, at training, more than 3 times faster than other PCA-based alternatives). In addition, extensive experimentation shows that by setting some parameters of the classifier (i.e., bootstrap sample size, number of trees, and number of rotations), the execution time is reduced with no significant loss of performance using a small ensemble., This work was supported through project TIN2015-67534-P (MINECO/FEDER, UE) of the Ministerio de Economía y Competitividad of the Spanish Government, projects BU085P17 and BU055P20 (JCyL/FEDER, UE) of the Junta de Castilla y León, Spain (both projects co-financed through European Union FEDER funds), and by the Consejería de Educación of the Junta de Castilla y León, Spain and the European Social Fund through a pre-doctoral grant (EDU/1100/2017). The project leading to these results has received also funding from “la Caixa” Foundation, Spain , under agreement LCF/PR/PR18/51130007. This material is based upon work supported by Google Cloud.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Mapping the scientific structure of organization and management of enterprises using complex networks

  • Olivares Gil, Alicia
  • Arnaiz Rodríguez, Adrián
  • Ramírez Sanz, José Miguel
  • Garrido Labrador, José Luis
  • Ahedo García, Virginia
  • García Osorio, César
  • Santos Martín, José Ignacio
  • Galán Ordax, José Manuel
Understanding the scientific and social structure of a discipline is a fundamental aspect for scientific evaluation processes, identifying trends and niches, and balancing the trade-off between exploitation and exploration in research. In the present contribution, the production of doctoral theses is used as a proxy to analyze the scientific structure of the knowledge area of business organization in Spain. To that end, a complex networks approach is selected, and two different networks are built: (i) the social network of co-participation in thesis examining committees and thesis supervision, and (ii) a bipartite network of theses and thesis descriptors. The former has a modular structure that is partially explained by thematic specialization in different subdisciplines. The latter serves to assess the interdisciplinary structure of the discipline, as it enables the characterization of affinity levels between fields, research poles and thematic clusters. Our results have implications for the scientific evaluation and formal definition of related fields., Spanish Ministry of Science, Innovation and Universities (RED2018-102518-T), the Spanish State Research Agency (PID2020-118906GB-I00 and PID2020-119894GB-I00 via AEI/10.13039/501100011033), the Junta de Castilla y León – Consejería de Educación (BU055P20), Fundación La Caixa (2020/00062/001) and from NVIDIA Corporation and its donation of the TITAN Xp GPUs that facilitated this research. This work was partially supported by the European Social Fund, as the authors José Miguel Ramírez-Sanz, José Luis Garrido-Labrador and Alicia Olivares-Gil are the recipient of a predoctoral grant from the Department of Education of Junta de Castilla y León (VA) (ORDEN EDU/875/2021). In addition, this work was also partially supported by the Generalitat Valenciana via its Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital, as Adrián Arnaiz is recipicient of a predoctoral grant.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

When is resampling beneficial for feature selection with imbalanced wide data?

  • Ramos Pérez, Ismael
  • Arnaiz González, Álvar
  • Rodríguez Diez, Juan José
  • García Osorio, César
This paper studies the effects that combinations of balancing and feature selection techniques have on wide data (many more attributes than instances) when different classifiers are used. For this, an extensive study is done using 14 datasets, 3 balancing strategies, and 7 feature selection algorithms. The evaluation is carried out using 5 classification algorithms, analyzing the results for different percentages of selected features, and establishing the statistical significance using Bayesian tests. Some general conclusions of the study are that it is better to use RUS before the feature selection, while ROS and SMOTE offer better results when applied afterwards. Additionally, specific results are also obtained depending on the classifier used, for example, for Gaussian SVM the best performance is obtained when the feature selection is done with SVM-RFE before balancing the data with RUS., The project leading to these results has received funding from “la Caixa” Foundation, under agreement LCF/PR/PR18/51130007. This work was also supported by the Junta de Castilla León under project BU055P20 (JCyL/FEDER, UE) and by the Ministry of Science and Innovation under project PID2020-119894GB-I00, co-financed through European Union FEDER funds.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Experimental Assessment of Feature Extraction Techniques Applied to the Identification of Properties of Common Objects, Using a Radar System

  • Diez Pastor, José Francisco
  • Latorre Carmona, Pedro
  • Garrido Labrador, José Luis
  • Ramírez Sanz, José Miguel
  • Rodríguez Diez, Juan José
Radar technology has evolved considerably in the last few decades. There are many areas where radar systems are applied, including air traffic control in airports, ocean surveillance, and research systems, to cite a few. Other types of sensors have recently appeared, which allow tracking sub-millimeter motion with high speed and accuracy rates. These millimeter-wave radars are giving rise to myriad new applications, from the recognition of the material close objects are made, to the recognition of hand gestures. They have also been recently used to identify how a person interacts with digital devices through the physical environment (Tangible User Interfaces, TUIs). In this case, the radar is used to detect the orientation, movement, or distance from the objects to the user’s hands or the digital device. This paper presents a thoughtful comparative analysis of different feature extraction techniques and classification strategies applied on a series of datasets that cover problems such as the identification of materials, element counting, or determining the orientation and distance of objects to the sensor. The results outperform previous works using these datasets, especially when the accuracy was lowest, showing the benefits feature extraction techniques have on classification performance., This work was supported by the Spanish Ministry of Science and Innovation under project PID2020-119894GB-I00, Junta de Castilla y León under project BU055P20 (JCyL/FEDER, UE) co-financed through European Union FEDER funds. José Luis Garrido-Labrador was supported by the predoctoral grant (BDNS 510149) awarded by the Universidad de Burgos, Spain.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

An experiment on animal re-identification from video

  • Kuncheva, Ludmila I. .
  • Garrido Labrador, José Luis
  • Ramos Pérez, Ismael
  • Hennessey, Samuel L.
  • Rodríguez Diez, Juan José
In the face of the global concern about climate change and endangered ecosystems, monitoring individual animals is of paramount importance. Computer vision methods for animal recognition and re-identification from video or image collections are a modern alternative to more traditional but intrusive methods such as tagging or branding. While there are many studies reporting results on various animal re-identification databases, there is a notable lack of comparative studies between different classification methods. In this paper we offer a comparison of 25 classification methods including linear, non-linear and ensemble models, as well as deep learning networks. Since the animal databases are vastly different in characteristics and difficulty, we propose an experimental protocol that can be applied to a chosen data collections. We use a publicly available database of five video clips, each containing multiple identities (9 to 27), where the animals are typically present as a group in each video frame. Our experiment involves five data representations: colour, shape, texture, and two feature spaces extracted by deep learning. In our experiments, simpler models (linear classifiers) and just colour feature space gave the best classification accuracy, demonstrating the importance of running a comparative study before resorting to complex, time-consuming, and potentially less robust methods., This work is supported by the UKRI Centre for Doctoral Training in Artificial Intelligence, Machine Learning and Advanced Computing (AIMLAC), funded by grant EP/S023992/1. This work is also supported by the Junta de Castilla León under project BU055P20 (JCyL/FEDER, UE), and the Ministry of Science and Innovation under project PID2020-119894 GB-I00 co-financed through European Union FEDER funds. J.L. Garrido-Labrador is supported through Consejería de Educación of the Junta de Castilla y León and the European Social Fund through a pre-doctoral grant (EDU/875/2021). I. Ramos-Perez is supported by the predoctoral grant (BDNS 510149) awarded by the Universidad de Burgos, Spain. J.J. Rodríguez was supported by mobility grant PRX21/00638 of the Spanish Ministry of Universities.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Network analysis of co-participation in thesis examination committees in an academic field in Spain, Análisis de la red de co-participaciones en tribunales de tesis de un área científica en España

  • Garrido Labrador, José Luis
  • Ramírez Sanz, José Miguel
  • Ahedo García, Virginia
  • Arnaiz Rodríguez, Adrián
  • García Osorio, César
  • Santos Martín, José Ignacio
  • Galán Ordax, José Manuel
This paper applies complex network analysis to unveil the informal structure of the knowledge area of business organization — Organización de empresas— in Spain. To do so, we use the TESEO database. We retrieve and statically analyze all the theses referred to the UNESCO academic field of Organization and management of enterprises. Our results reveal a degree distribution of the participation in thesis examining committees and thesis supervision compatible with a truncated power law. Community analysis of the projected network of co-participation in thesis committees presents modular structure. When we focus on the backbone of such network, we find that the patterns detected can be partially explained by homophily of scholars that interact in the same academic association., Este artículo analiza la base de datos TESEO mediante redes complejas para obtener la estructura informal del área de conocimiento de Organización de Empresas en España. Para ello, toma todas las tesis referidas al campo UNESCO de Organización y Dirección de Empresas, y las analiza de forma estática. Los resultados revelan una distribución de grado de la participación en tribunales y supervisión de tesis compatible con una ley de potencia truncada, y una clara estructura modular. Los patrones encontrados analizando el núcleo de la red pueden ser parcialmente explicados por homofilia entre los investigadores de la misma asociación académica., The authors acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities (HAR2017-90883-REDC and RED2018‐102518‐T), from the Junta de Castilla y León - Consejería de Educación (BDNS 425389 and BU055P20) and the predoctoral grant awarded to Virginia Ahedo (supported by the European Social Fund), and from NVIDIA Corporation and its donation of the TITAN Xp GPUs that facilitated this research. In addition, the authors would like to thank Dr. Manzanedo, Dra. SaizBárcena, Dr. Solé Parellada, Dr. Izquierdo and Dr. del Olmo for their insightful help to improve the manuscript and Alicia Olivares-Gil and Yi Peng Ji for some programming help.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Semi-supervised classification with pairwise constraints: A case study on animal identification from video

  • Kuncheva, Ludmila I. .
  • Garrido Labrador, José Luis
  • Ramos Pérez, Ismael
  • Hennessey, Samuel L.
  • Rodríguez Diez, Juan José
Mainstream semi-supervised classification assumes that part of the available data are labelled. Here we assume that, in addition to the labels, we have pairwise constraints on the unlabelled data. Each constraint links two instances, and is one of Must Link (ML, belong to the same class) or Cannot Link (CL, belong to different classes). We propose an approach that uses the labelled data to train a classifier and then applies the ML and CL constraints in subsequent labelling. In our approach, a set of instances are labelled at the same time. Our case study is on animal re-identification. The dataset consists of five free-camera video clips of animals (koi fish, pigeons and pigs), annotated with bounding boxes and animal identities. The proposed approach combines the representations or classifiers predictions from the bounding boxes of consecutive frames. We demonstrate that our approach outperforms standard classifiers, constrained clustering, as well as inductive and transductive semi-supervised learning, using five feature representations., This work is supported by the UKRI Centre for Doctoral Training in Artificial Intelligence, Machine Learning and Advanced Computing (AIMLAC), funded by grant EP/S023992/1. This work is also supported by the Junta de Castilla León under project BU055P20 (JCyL/FEDER, UE), and the Ministry of Science and Innovation of Spain under the projects PID2020-119894GB-I00/AEI/10.13039/501100011033, co-financed through European Union FEDER funds. J.L. Garrido-Labrador is supported through Consejería de Educación of the Junta de Castilla y León and the European Social Fund through a pre-doctoral grant (EDU/875/2021). I. Ramos-Perez is supported by the predoctoral grant (BDNS 510149) awarded by the Universidad de Burgos, Spain. J.J. Rodríguez was supported by mobility grant PRX21/00638 of the Spanish Ministry of Universities .
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Artículo científico (JournalArticle)

Ensemble methods and semi-supervised learning for information fusion: A review and future research directions

  • Garrido Labrador, José Luis
  • Serrano Mamolar, Ana
  • Maudes Raedo, Jesús M.
  • Rodríguez Diez, Juan José
  • García Osorio, César
Advances over the past decade at the intersection of information fusion methods and Semi-Supervised Learning (SSL) are investigated in this paper that grapple with challenges related to limited labelled data. To do so, a bibliographic review of papers published since 2013 is presented, in which ensemble methods are combined with new machine learning algorithms. A total of 128 new proposals using SSL algorithms for ensemble construction are identified and classified. All the methods are categorised by approach, ensemble type, and base classifier. Experimental protocols, pre-processing, dataset usage, unlabelled ratios, and statistical tests are also assessed, underlining the major trends, and some shortcomings of particular studies. It is evident from this literature review that foundational algorithms such as self-training and co-training are influencing current developments, and that innovative ensemble techniques are continuing to emerge. Additionally, valuable guidelines are identified in the review for improving research into intrinsically semi-supervised and unsupervised pre-processing methods, especially for regression tasks., This work was supported through the Junta de Castilla y León (JCyL) (regional goverment) under project BU055P20 (JCyL/FEDER, UE), the Spanish Ministry of Science and Innovation under project PID2020-119894GB-I00 co-financed through European Union FEDER funds, and project TED2021-129485B-C43 funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. J.L. Garrido-Labrador is supported through Consejería de Educación of the Junta de Castilla y León and the European Social Fund through a pre-doctoral grant EDU/875/2021 (Spain).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Contribución de congreso (ConferenceOutput)

Evaluation of Semi-Supervised Machine Learning applied to Affective State Detection

  • Martin-Melero, Íñigo
  • Serrano Mamolar, Ana
  • Rodríguez Diez, Juan José
Comunicación presentada en: EmotionAware 2024: Eighth International Workshop on Emotion Awareness for Pervasive Computing Beyond Traditional Approaches, held as part of the 2024 IEEE International Conference on Pervasive Computing and Communications Workshops and other Affiliated Events (PerCom Workshops), 11–15 March 2024, Biarritz, France., The affective computing field usually concerns data that is difficult, expensive or time-consuming to label. One way to overcome this limitation is the application of Semi-Supervised Machine Learning, that typically works with a small set of labeled data and a larger one of unlabeled data. This paper assesses the suitability of these techniques on the prediction of affective state, by analyzing the physiological and emotional response data of 30 different subjects while watching several emotion-eliciting videos. Three Semi-Supervised Learning algorithms are compared with their Supervised base classifiers in both a subject-independent and subject-dependent analyses, across a widely extended dataset. In view of the results, it can be concluded that Semi-Supervised Learning did not outperform their respective Supervised base classifiers for this specific dataset as it was expected. Subject-dependent classification resulted in accuracy rates between 68% and 85%, whereas the accuracy rates were between 38% and 72% for subject-independent classification., This work has been supported by the Junta de Castilla y Leon under project BU055P20 (JCyL/FEDER, UE), by the Ministry of Science and Innovation under project PID2020-119894GB-I00, co-financed through European Union FEDER funds, and by project TED2021-129485B-C43 funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Tesis doctoral (DoctoralThesis)

Machine Learning Approaches in Bioinformatics: Advances in Transcription and Protein Fitness Prediction

  • Barbero Aparicio, José Antonio
As we move deeper into the information age, bioinformatics has become increasingly important in modern biology, largely due to its critical role in processing and analyzing the vast amounts of complex data generated in the field. Traditional methods are often overwhelmed by the large volume and complexity of this data, positioning machine learning techniques as an optimal solution. Exploring the intersection of machine learning and bioinformatics offers numerous opportunities to develop and improve computational tools designed to handle and gain insights from these vast datasets. The main objective of this thesis is to develop a thorough exploration of the possibilities of machine learning in the field of bioinformatics, with a particular focus on specific problems such as transcription start and protein fitness prediction. Furthermore, given the similarities between bioinformatics sequence data and the natural language processing domain, the research emphasizes the use of sequence-based methods. Our research has resulted in several contributions to the field in the form of three scientific papers. The first two focus on transcription start prediction. In the first, we discovered that the integration of biophysical simulations in conjunction with the DNA sequence can improve the results of machine learning methods. Additionally, in our second paper we concluded that, while support vector machines have been a traditional choice for transcription start prediction, our research suggests that deep learning methods outperform them, marking a paradigm shift in the field. In addition, we presented custom-built datasets using Ensembl data, providing a valuable resource for future studies. The third paper addresses the issue of protein fitness prediction specifically in scarce dataset scenarios and concludes that deep transfer learning methods get established as the best alternative when compared with other strategies well suited for such situations, such as semi-supervised learning., A medida que nos seguimos adentrando en la era de la información, la bioinformática está pasando a ser cada vez más importante en la biología moderna, en gran parte debido a su papel crítico en el procesamiento y análisis de la gran cantidad de datos complejos generados en el campo. A menudo los métodos tradicionales encuentran dificultades debidas al gran volumen y complejidad de estos datos, posicionando a las técnicas de aprendizaje automático como una solución más óptima. La exploración de la intersección entre aprendizaje automático y la bioinformática ofrece numerosas oportunidades para el desarrollo y la mejora de herramientas computacionales diseñadas para manejar y obtener información crítica sobre estos grandes conjuntos de datos. El objetivo principal de esta tesis es el desarrollo de una exploración exhaustiva de las posibilidades del aprendizaje automático en bioinformática, con un enfoque específico en problemas como la predicción del inicio de la transcripción y la predicción del fitness en las proteínas. Además, dadas las similitudes entre las secuencias bioinformáticas y el campo del procesamiento del lenguaje natural, la investigación tiene un claro énfasis en el uso de métodos basados en secuencias. Este trabajo ha resultado en la producción de varias contribuciones al campo en forma de tres artículos científicos. Los dos primeros se centran en la predicción del inicio de la transcripción. En el primero de ellos descubrimos que la integración de simulaciones biofísicas en conjunto con la secuencia de ADN puede mejorar los resultados de los métodos de aprendizaje automático. En el segundo, además, llegamos a la conclusión de que, mientras que las máquinas de soporte vectorial han sido una opción muy establecida en el campo de la predicción del inicio de la transcripción, nuestra investigación sugiere que los métodos de aprendizaje profundo los superan, marcando un cambio de paradigma en el área. Además, presentamos conjuntos de datos personalizados a partir de datos de Ensembl, proporcionando un recurso valioso para futuros estudios. El tercer artículo aborda la predicción del fitness en proteínas, específicamente en escenarios con conjuntos de datos escasos y concluye que los métodos de deep transfer learning se establecen como la mejor alternativa ante otras estrategias bien adaptadas a tales situaciones, como los métodos de aprendizaje semi-supervisado., his thesis has been funded through a pre-doctoral grant by the University of Burgos. The work included in this thesis has also been supported by the Junta de Castilla y León under project BU055P20 (JCyL/FEDER, UE), by the Ministry of Science and Innovation under project PID2019-109481GB-I00 and the Junta de Andalucia under project UCO1264182, in both cases co-financed through European Union FEDER funds and by Fundación Bancaria la Caixa under project 2020/00062/001. NVIDIA Corporation donated the TITAN Xp GPUs used in this research.
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Tesis doctoral (DoctoralThesis)

Técnicas de preprocesamiento en datos anchos, Preprocessing techniques for wide data

  • Ramos Pérez, Ismael
En el aprendizaje automático, especialmente en biología y genómica, los conjuntos de datos son llamados anchos, Los datos anchos contienen una gran cantidad de características pero pocas instancias. Esta alta dimensionalidad dificulta el aprendizaje de los modelos de aprendizaje, causando sobreajuste y sesgos. Para abordar estos problemas, las técnicas de preprocesamiento de datos son fundamentales. Esta tesis explora diversas estrategias de preprocesamiento, como la selección y reducción de características, y el remuestreo para equilibrar las clases. Además de técnicas semi-supervisadas. A través de tres artículos, se comparan diferentes estrategias de preprocesado y, en el campo de la selección de características en aprendizaje semi-supervisado y se propone una nueva taxonomía de algoritmos. Los resultados obtenidos demuestran la importancia de combinar adecuadamente las técnicas de preprocesamiento para obtener modelos más robustos y generales. Esta investigación proporciona una guía práctica para abordar los desafíos planteados por los datos anchos en el aprendizaje automático., The research carried out for the development of this doctoral thesis has been partially funded by the Junta de Castilla y León under project BU055P20 (JCyL/FEDER, UE), by the Spanish Ministry of Science and Innovation (projects PID2020-119894GB-I00 and TED 2021129485B-C43) and by “la Caixa“ Foundation, under agreement LCF/PR/PR18/51130007. The author has been recipient of the predoctoral grant by the Universidad de Burgos., Doctorado en Ingeniería y Tecnologías Industrial, Informática y Civil
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publication Tesis doctoral (DoctoralThesis)

Optimization of industrial processes through semi-supervised learning

  • Ramírez Sanz, José Miguel
Enlas últimas décadas, el aprendizaje automático ha adquirido una gran popularidad, que ha ayudado a impulsar su ya creciente desarrollo. Dentro del aprendizaje automático, una nueva técnica llamada aprendizaje semisupervisado es capaz de aprovechar tanto los datos etiquetados comolos noetiquetados. Esto permite desarrollar modelos más precisos y con mejor capacidad de generalización gracias a la información que son capaces de extraer de los datos. La industria ha sido el motor del progreso humano, transformando recursos en bienes y productos de alta complejidad mediante la innovación. Mediante el desarrollo tecnológico y económico, la industria ha permitido que la sociedad avance hacia nuevos horizontes de productividad y calidad de vida. Esta tesis explora aplicaciones del aprendizaje semisupervisado en problemas industriales, con el objetivo de comprender su estado del arte, investigar nuevas metodologías, diseñar modelos y aplicarlos a casos reales en la industria. Las aportaciones más destacables de esta tesis doctoral han sido revisar el estado del arte de la aplicación de métodos de aprendizaje semisupervisado aladetección ydiagnóstico defallos industriales. Se ha investigado y propuesto una nueva taxonomía para una nueva técnica desarrollada a partir del aprendizaje semisupervisado: el aprendizaje semisupervisado seguro. Además, se ha realizado el desarrollo de una versión semisupervisada del método más conocido del grupo de investigación, el Rotation Forest. También se ha elaborado el desarrollo y la aplicación de un método interpretable de selección de características basado en árboles para el problema de selección del método de transporte. Por último, se han aplicado y comparado modelos supervisados y semisupervisados al problema de selección del método de transporte. En resumen, esta tesis doctoral proporciona una contribución significativa al campo del aprendizaje semisupervisado aplicado a la industria, proponiendo nuevas metodologías y modelos que optimizan problemas industriales, validandolos en casos de estudio reales., In recent decades, machine learning has gained great popularity, which has helped boost its already growing development. Within machine learning, a new technique called semi-supervised learning is capable of leveraging both labeled and unlabeled data. This allows it to develop more precise models with better generalization capabilities due to the information they can extract from the data. Industry has been the engine of human progress, transforming resources into complex goods and products through innovation. Technological and economic development has enabled society to advance toward new horizons of productivity and quality of life. This doctoral thesis explores the applications of semi-supervised learning to industrial problems. The main objectives include understanding the state of the art of the applications of this technique to industrial problems, investigating new methodologies developed from this approach, designing new models of this type of learning, and applying them to real-world industrial environments. The main contributions of this doctoral thesis include reviewing the state of the art of semi-supervised learning methods applied to fault detection and diagnosis in industrial settings, highlighting the formulation of a series of best practices to improve future research in this field. Additionally, a new taxonomy has been investigated and proposed for a new technique derived from semi-supervised learning: safe semi-supervised learning. Also the development of a semi-supervised version of the most well-known method from the research group, the Rotation Forest, was also achieved. Moreover, a tree-based interpretable feature selection method was developed and applied to the problem of travel mode choice. Finally, supervised and semi-supervised models were applied and compared for the travel mode choice problem. In summary, this doctoral thesis makes a significant contribution to the field of semi-supervised learning applied to industry, proposing new methodologies and models that optimize industrial problems, validated through real-world case studies., This thesis was supported by the Junta de Castilla y León under project BUR055P20 (JCyL/FEDER, UE), the Ministry of Science and Innovation of Spain under the projects PID2020-119894GB-I00, TED2021129485B-C43 and PID2023-150694OA-I00, co-financed through European Union FEDERfunds. It also was supported through the Consejería de Educación of the Junta de Castilla y León and the European Social Fund through a pre-doctoral grant (EDU/875/2021)., Doctorado en Ingeniería y Tecnologías Industrial, Informática y Civil
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Laser-induced coloration of ceramic tiles covered with magnetron sputtered precursor layers

  • Rico, V.J.
  • Lahoz, R.
  • Rey-García, F.
  • de Francisco, I.
  • Gil-Rostra, J.
  • Espinós, J.P.
  • de la Fuente, G.F.
  • González-Elipe, A.R.
This paper reports a new methodology for the coloring of glazed ceramic tiles consisting of the near infrared pulsed laser processing of copper containing oxide coatings prepared by magnetron sputtering. As a second approach, the employ for the same purpose of a novel laser furnace technique is also described. Changing the laser parameters and using the laser furnace to treat the tiles at high temperature during irradiation has resulted in a wide color palette. The optical characterization of the modified tiles by UV-Vis spectroscopy has been complemented with their microstructural and compositional analysis by Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and Time Of Flight Secondary Ion Mass Spectrometry (TOF-SIMS). The chemical composition of the surface was obtained by X-ray Photoemission Spectroscopy (XPS) and its structure determined by X?ray diffraction (XRD). The chemical resistance was characterized by several tests following the norm ISO 10545-13. Color changes have been attributed to surface microstructural and chemical transformations that have been accounted for by simple models involving different ablation, melting, diffusion, and segregation/agglomeration phenomena depending on the laser treatments employed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Differences between individuals with schizophrenia or obsessive-compulsive disorder and healthy controls in social cognition and mindfulness skills: A controlled study

  • López-Del-Hoyo, Y.
  • Gonzalez Panzano, M.
  • Lahera, G.
  • Herrera-Mercadal, P.
  • Navarro-Gil, M.
  • Campos, D.
  • Borao, L.
  • Morillo, H.
  • García-Campayo, J.
The study of social cognition (SC) has emerged as a key domain of mental health, supporting the notion that poorer performance in SC tasks is linked to psychopathology, although most studies have primarily addressed only schizophrenia (SZ). Some recent studies have also shown deficits of SC in obsessive-compulsive disorder (OCD) patients; however, little is known about how individuals with OCD may differ on SC performance from individuals with SZ. Moreover, initial research in this field suggests that mindfulness skills may be related to SC abilities such as theory of mind (ToM), emotion processing and empathy. Given the potential benefits of mindfulness for treating OCD and SZ, further efforts are needed to understand the association between mindfulness and SC in these populations. The main objective of this study was to compare samples of patients with SZ and OCD to healthy controls (HCs) on several social cognition (SC) domains and mindfulness measures. In total, 30 outpatients diagnosed with SZ, 31 outpatients diagnosed with OCD and 30 healthy controls were assessed in emotion recognition (the Eyes Test), ToM (the Hinting Task), attributional style (the Ambiguous Intentions and Hostility Questionnaire), empathy (the Interpersonal Reactivity Index) and dispositional mindfulness (the MAAS and the FFMQ). Both clinical groups showed poorer performance in emotion recognition and ToM than the HCs. The OCD and SZ patients did not significantly differ in impairment in SC, but the OCD group had higher scores in attributional style (intentionality and anger bias). With regard to mindfulness, the results found lower levels of acting with awareness for the HCs than for either clinical group and higher non-reactivity to inner experience for the HCs than for the individuals with OCD; the results also yielded significant correlations between SC and mindfulness. In conclusion, these findings revealed that SC abilities were impaired in the SZ and OCD groups compared to the HC group, suggesting a similar disrupted pattern in both clinical groups. Aspects of dispositional mindfulness were differentially associated with SC, which may suggest their potential role in novel transdiagnostic interventions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Cybersickness and sense of presence as predictors of VR task performance in individuals with and without Post-COVID-19 condition

  • Llana, Tania
  • Garces-Arilla, Sara
  • Garcia-Navarra, Sara
  • Mendez-Lopez, Magdalena
  • Juan, M.-Carmen
  • Mendez, Marta
Virtual reality (VR) is increasingly applied in neurological assessment, yet little is known about whether user experience factors, such as cybersickness and sense of presence, relate differently to VR task performance depending on the presence of neurological symptoms. This study tested 58 patients with Post-COVID-19 condition (PCC) symptoms and 54 control individuals (non-PCC group) on a VR-based spatial memory task. The Simulator Sickness Questionnaire (SSQ) and the Igroup Presence Questionnaire (IPQ) were used to assess cybersickness and sense of presence, respectively. Multiple linear regressions, adjusted for age and sex, showed that the PCC group reported significantly higher SSQ scores across all subscales. In contrast, both groups showed similar IPQ responses and task performance (i.e., number of correct responses, number of attempts, and execution time). Moderated regression models, adjusted for the same covariates, showed that cybersickness did not predict task execution time in either group. However, in the PCC group, higher sense of presence ratings predicted faster task completion, an effect not observed in the non-PCC group. Considering covariate effects, age consistently predicted slower performance. In addition, female sex emerged as a significant covariate specifically for sense of presence, with women reporting higher scores than men. Overall, the results indicate that PCC is associated with increased VR-induced cybersickness, while a heightened sense of presence may facilitate motor and cognitive processing during task performance, particularly in individuals with neurological conditions. Further experimental studies are needed to investigate how variations in presence levels influence performance in VR-based cognitive tasks.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

In situ determination of the water condensation mechanisms on superhydrophobic and superhydrophilic titanium dioxide nanotubes

  • Macias-Montero, Manuel|||0000-0002-5508-928X
  • Lopez-Santos, Carmen
  • Filippin, A. Nicolas
  • Rico, Victor J.|||0000-0002-5083-0390
  • Espinos, Juan Pedro|||0000-0002-3053-0841
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Pérez-Dieste, Virginia
  • Escudero, Carlos|||0000-0001-8716-9391
  • Gonzalez-Elipe, Agustín|||0000-0002-6417-1437
  • Borras, Ana|||0000-0001-8799-2054
One-dimensional (1D) nanostructured surfaces based on high-density arrays of nanowires and nanotubes of photoactive titanium dioxide (TiO) present a tunable wetting behavior from superhydrophobic to superhydrophilic states. These situations are depicted in a reversible way by simply irradiating with ultraviolet light (superhydrophobic to superhydrophilic) and storage in dark. In this article, we combine in situ environmental scanning electron microscopy (ESEM) and near ambient pressure photoemission analysis (NAPP) to understand this transition. These experiments reveal complementary information at microscopic and atomic level reflecting the surface wettability and chemical state modifications experienced by these 1D surfaces upon irradiation. We pay special attention to the role of the water condensation mechanisms and try to elucidate the relationship between apparent water contact angles of sessile drops under ambient conditions at the macroscale with the formation of droplets by water condensation at low temperature and increasing humidity on the nanotubes' surfaces. Thus, for the as-grown nanotubes, we reveal a metastable and superhydrophobic Cassie state for sessile drops that tunes toward water dropwise condensation at the microscale compatible with a partial hydrophobic Wenzel state. For the UV-irradiated surfaces, a filmwise wetting behavior is observed for both condensed water and sessile droplets. NAPP analyses show a hydroxyl accumulation on the as-grown nanotubes surfaces during the exposure to water condensation conditions, whereas the water filmwise condensation on a previously hydroxyl enriched surface is proved for the superhydrophilic counterpart.
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

Is there less gender inequality in the Service sector? The gender wage gap in Knowledge-Intensive Service In Spain.

  • Dueñas Fernández, Diego|||0000-0002-1120-8873
  • Iglesias Fernández, Carlos|||0000-0002-5101-5195
  • Llorente Heras, Raquel
The expansion of services and the dissemination of information and communication technologies (ICTs) are identified as important factors for improving employment opportunities for women, reducing labour differences by gender. The objective of the study is to determine to what extent services, and especially those most closely linked with knowledge and ICTs such as knowledge-intensive services (KIS), are changing some of the basics of labour gender differences. To do this, first we measure and characterize employment related to the service sector and KIS, comparing the existing gender wagegap in these activities with the one observed in the overall economy. Then we carry out an analysis of decomposition over these gaps (in term of total distribution of wages and by quantiles). Our results indicate that, although KIS improve the wage situation of women, they are unable substantially to reduce gender wage inequality in the Spanish labour market, perhaps because the same gendered structures of the workplace are replicated in the KIS activities., CENTRA
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo preliminar (WorkingPaper)

La incidencia de los aspectos pre-market : segregación laboral y gap salarial por género

  • Dueñas Fernández, Diego
  • Iglesias Fernández, Carlos|||0000-0002-5101-5195
  • Llorente Heras, Raquel
Los autores agradecen la financiación recibida por el Centro de Estudios Andaluces (CENTRA - Junta De Andalucía) para la realización del proyecto “Consecuencias y Medidas hacia la Igualdad de Género (Pry055/12)” publicado en Factoría de Ideas; gracias a la cual ha sido posible desarrollar parte de los resultados alcanzados en este artículo, El presente artículo tiene como objetivo determinar cuál es la desigual influencia que tienen en el mercado de trabajo español de los nuevos aspectos pre-market: factores sociales y sociológicos que influyen en la propia personalidad y que condicionan de manera diferente las decisiones laborales de hombres y mujeres. Concretamente nuestro objeto de estudio es la segregación laboral y las diferencias salariales por género. Para ello, el trabajo analiza los datos de la Encuesta de Clases Sociales y Estructura Social elaborada por el Centro de Investigaciones Sociológicas (CIS) en 2006. Con respecto a la segregación ocupacional, los resultados alcanzados sobre la estimación de una serie de probits multinivel indican que la segregación ocupacional femenina se fundamenta en las decisiones personales y el tipo de ubicación laboral detentada más que en los aspectos pre-market que no consiguen alcanzar una influencia significativa. Los resultados alcanzados en las estimaciones salariales sobre la descomposición de Oaxaca-Blinder establecen que los aspectos relacionados con el puesto de trabajo siguen siendo los factores determinantes de la desigual remuneración por género existente en España. Asimismo, los aspectos pre-market presentan una reducida aportación a la explicación de las diferencias salariales. Todo ello, nos lleva finalmente a pensar que los aspectos pre-market no son el determinante directo de la segregación ocupacional y del gap salarial en España sino que contribuyen levemente a su explicación., The aim of this article is to determine, on the Spanish labor market, which is the unequal influence that pre-market factors: a social and sociological factors that influence the own personality and that determine in a different way the labor decisions of men and women. Our analysis focuses specifically in the labor segregation and the gender wage gap. For this purpose, Social Classes and Structures Socially survey elaborated by the Center of Sociological Investigations (CIS) in 2006 is analyzed. In relation to the segregation, a several estimations of multilevel probits indicate that female occupational segregation is based on the personal decisions and the type of labor location more than the pre-market factors. The results reached in the Oaxaca-Blinder's wage decompositions establish that the working place or location continues being the main determinant factors of gender wage gap in Spain. In addition, the pre-market factors offer a limited contribution into the explanation of gender wage gap. So, all results leads us to think finally that pre-market factors don´t determine directly neither occupational segregation nor wage gap in Spain, Centro de Estudios Andaluces
e_Buah Biblioteca Digital Universidad de Alcalá
Publication Artículo científico (JournalArticle)

3He-rich solar energetic particles in helical jets on the Sun

  • Bučík, Radoslav
  • Innes, Davinia E.
  • Mason, Glenn M.
  • Wiedenbeck, Mark E.
  • Gómez Herrero, Raúl|||0000-0002-5705-9236
  • Nitta, Nariaki V.
Particle acceleration in stellar flares is ubiquitous in the universe; however, our Sun is the only astrophysical object where energetic particles and their source flares can both be observed. The acceleration mechanism in solar flares, tremendously enhancing (up to a factor of 10,000) rare elements like 3He and ultra-heavy nuclei, has been puzzling for almost 50 years. Here we present some of the most intense 3He- and Fe-rich solar energetic particle events ever reported. The events were accompanied by nonrelativistic electron events and type-III radio bursts. The corresponding high-resolution, extreme-ultraviolet imaging observations have revealed for the first time a helical structure in the source flare with a jet-like shape. The helical jets originated in relatively small, compact active regions, located at the coronal-hole boundary. A mini-filament at the base of the jet appears to trigger these events. The events were observed with the two Solar Terrestrial Relations Observatories on the backside of the Sun, during the period of increased solar activity in 2014. The helical jets may be a distinct feature of these intense events that is related to the production of high 3He and Fe enrichments., Universidad de Alcalá, Ministerio de Economía y Competitividad