Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 47
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Magnetophotonic Response of Three-Dimensional Opals

  • Caicedo, José Manuel
  • Pascu, Oana
  • López García, Martín
  • Canalejas, Victor
  • Blanco, Álvaro
  • López, Cefe
  • Fontcuberta, Josep
  • Roig, Anna
  • Herranz, Gervasi
[EN] Three-dimensional magnetophotonic crystals (3D-MPCs) are being postulated as appropriate platforms to tailor the magneto-optical spectral response of magnetic materials and to incorporate this functionality in a new generation of optical devices. By infiltrating self-assembled inverse opal structures with monodisperse nickel nanoparticles we have fabricated 3D-MPCs that show a sizable enhancement of the magneto-optical signal at frequencies around the stop-band edges of the photonic crystals. We have established a proper methodology to disentangle the intrinsic magneto-optical spectra from the nonmagnetic optical activity of the 3D-MPCs. The results of the optical and magneto-optical characterization are consistent with a homogeneous magnetic infiltration of the opal structure that gives rise to both a red-shift of the optical bandgap and a modification of the magneto-optical spectral response due to photonic bandgap effects. The results of our investigation demonstrate the potential of 3D-MPCs fabricated following the approach outlined here and offer opportunities to adapt the magneto-optical spectral response at optical frequencies by appropriate design of the opal structure or magnetic field strength., We warmly acknowledge discussions on the subject with Antonio Garcia Martin and Gaspar Armelles (CNM-CSIC). We acknowledge partial financial support from the CSIC CRIMAFOT (PIF 08-016), the Spanish Government (CONSOLIDER-Nanoselect-CSD2007-00041 and NanoLight.es-CSD20070046, MAT2008-06761-C03, MAT2009-08024, MAT2009-06835-E, MAT2009-07841, and FPI grant to J.M.C), the Generalitat de Catalunya (2009SGR-376, 2009SGR-203, and FI grant to O.P.), the Comunidad de Madrid S-0505/ESP-0200, and the EC FP7 NoE Nanophotonics4Energy-248855.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Charge Transfer States in Stable Neutral and Oxidized Radical Adducts from Carbazole Derivatives

  • Fajarí, Lluís
  • Papoular, Robert
  • Reig, Marta
  • Brillas, Enric
  • Vallcorba, Oriol
  • Rius, Jordi
  • Velasco, Dolores
  • Juliá, Luis
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
[EN] In this paper we report the spectral properties of the stable radical adducts 1•–3•, which are formed by an electron donor moiety, the carbazole ring, and an electron acceptor moiety, the polychlorotriphenylmethyl radical. The molecular structure of radical adduct 1• in the crystalline state shows a torsion angle of approximately 90° between the phenyl and the carbazole rings due to steric interactions. They exhibit a charge transfer band in the visible range of the electronic spectrum. All of them are chemically oxidized with copper(II) perchlorate to the respective cation species, which show a strong charge transfer band into the near-infrared region of the spectrum. Radical adducts 1•–3• and the corresponding stable oxidized species 1+–3+ are real organic mixed-valence compounds due to the open-shell nature of their electronic structure. Charge transfer bands of the cation species are stronger and are bathochromically shifted with respect to those of the neutral species due to the greater acceptor ability of the positively charged central carbon atom of the triphenylmethyl moiety. The cationic species 1+–3+ are diamagnetic, as shown by the absence of a signal in the EPR spectrum in acetonitrile solution at room temperature, but they show an intense and unique band in frozen solutions, Financial support for this research from the MCI (Spain) through project CTQ2012-36074 is gratefully acknowledged. We also thank the EPR service of the Advanced Research Institute of Catalunya (CSIC) (Spain) for recording the EPR spectra and the ESRF for beamtime allocation at ID31. O.V. also thanks Consolider NANOSELECT CSD2007-00041 for a contract.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermal diffusion at nanoscale: From CoAu alloy nanoparticles to Co@Au core/shell structures

  • Llamosa Pérez, Daniel
  • Espinosa, Ana
  • Martínez Orellana, Lidia
  • Román García, Elisa Leonor
  • Ballesteros Pérez, Carmen Inés
  • García-Hernández, Mar
  • Huttel, Yves
[EN] The thermal-induced diffusion at nanoscale is investigated through the detailed study of the structural and magnetic properties of Co@Au nanoparticles as a function of the deposition temperature. Nanoparticles of 10 nm were fabricated using an ion cluster source from a Co95Au5 target. While low-temperature deposition leads to the formation of an alloyed fcc CoAu core with an incomplete cobalt oxide shell, higher deposition temperature induces the formation of a pure hcp Co core with an intermediate Au shell and a compact outer cobalt oxide shell. The evolution of the magnetic properties of the nanoparticles is presented and discussed in light of the structural changes of the nanoparticles upon deposition temperature and nanoparticle density. It is found that thermal-induced diffusion can be successfully used to tune the structural and magnetic properties at the nanoscale in CoAu nanoparticles. © 2013 American Chemical Society., Work was supported by the Spanish Ministerio de Ciencia e Innovación under projects MAT2008-06765-C02, MAT2011-29194-C02-02, MAT2011-27470-C02-02, CSD2007-00041 (NANOSELECT), and CSD2009-00013 (IMAGINE). D. Llamosa P. acknowledges financial support from Ministerio de Ciencia e Innovación under contract n° JAEPre-09-01925. L.M. and E.R. acknowledge the Consejo Superior de Investigaciones Cientifícas (PIE 201160E085)., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Generation of nanoparticles with adjustable size and controlled stoichiometry: Recent advances

  • Martínez Orellana, Lidia
  • Díaz, M.
  • Román García, Elisa Leonor
  • Ruano Díaz, Manuel
  • Llamosa Pérez, Daniel
  • Huttel, Yves
[EN] We present a bottom-up fabrication route based on the sputtering gas aggregation source that allows the generation of nanoparticles with controllable and tunable chemical composition while keeping the control of the cluster size. We demonstrate that the chemical composition of the particles can be monitored by the individual adjustment of the working parameters of the magnetrons inserted in a gas aggregation zone. Such control of the parameters leads to a fine control of the ion density of each target material and hence to the control of the chemical composition of the nanoparticles. In particular, we show through X-ray photoemission, atomic force microscopy, and high-resolution transmission electron microscopy that it is possible to generate bimetallic (AgAu) and trimetallic (AgAuPd) alloy nanoparticles with well-defined and tunable stoichiometries from three targets of pure Ag, Au, and Pd. The proposed route for the generation of nanoparticles opens new possibilities for the fabrication of nanoparticles using a physical method that, for some applications, could be complementary to the chemical methods., Spanish Ministerio de Ciencia e Innovación and Comisión Interministerial para la Ciencia Y la Tecnología - CICYT under Contracts MAT2008-06765-C02-02, MAT2011-29194-C02-02, MAT2009-08650, and CSD2007-00041 (Nanoselect) and through the FPI program for financial support. The Consejo Superior de Investigaciones Científicas is also acknowledged. D. Llamosa P. acknowledges financial support from Ministerio de Ciencia e Innovació n under Contract JAEPre-09-01925
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Solution-derived YBa2Cu3O7 nanocomposite films with a Ba2YTaO6 secondary phase for improved superconducting properties

  • Coll, Mariona
  • Ye, Shuai
  • Rouco, Víctor
  • Palau, Anna
  • Guzmán, Roger
  • Gázquez, Jaume
  • Arbiol, Jordi
  • Suo, Hongli
  • Puig Molina, Teresa
  • Obradors, Xavier
We report on the spontaneous segregation of double perovskite Ba 2YTaO6 (BYTO) nanoparticles within YBa2Cu 3O7 (YBCO) films forming a nanocomposite with two ternary oxides by the low cost and scalable chemical solution trifluoroacetate approach. Phase orientation, nanostructural and pinning studies are carried out by 2D x-ray diffraction, advanced scanning transmission electron microscopy and transport measurements, respectively. In this complex oxide nanocomposite system (YBCO-BYTO) the majority of the nanoparticles segregated within the (00l)-oriented superconducting matrix are randomly oriented. The presence of randomly oriented nanoparticles plays a key role in the generation of localized highly strained areas within the YBCO matrix which are suggested to strongly affect the superconducting properties. The incorporation of 6-10% of BYTO resulted in a maximum pinning force, at 77 K, three times higher than that obtained for a pristine sample, while Tc was maintained at 89-90 K. © 2013 IOP Publishing Ltd., The authors would like to acknowledge the financial support of MICINN (MAT2008-01022, MAT2011-28874-C02-01), Consolider NANOSELECT (CSD2007-00041) and Generalitat de Catalunya (2009 SGR 770, NanoAraCat and Xarmae). RG and MC acknowledges grants of MICINN, VR and JG acknowledges JAE CSIC grants. SY would like to thank the National Natural Science Foundation of China (51171002) and the program of New Century Excellent Talents in University of China. The authors thank Dr C Magen and LMA-INA for offering access to their instruments and expertise., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Surface study of cerium oxide based coatings obtained by cathodic electrodeposition on zinc

  • Martínez Orellana, Lidia
  • Román García, Elisa Leonor
  • Segovia, J. L. de
  • Poupard, S.
  • Creus, J.
  • Pedraza, F.
[EN] A surface study of electrodeposited cerium oxide based coatings is presented. Different surface analytical techniques were used in order to obtain complementary information to fully characterize such complex systems. X-ray Photoelectron Spectroscopy was used as the main technique to determine the surface composition of the coating. The analysis of the core level peaks of the elements provides additional information about the functional groups present on the surface. A mixture of Ce (III) and Ce (IV) was found in the coating and their proportion was calculated at different depths. The analysis of the O 1s core level peak revealed a triple structure whose origin will be discussed. To support the results obtained, electron stimulated desorption was performed. The study was completed with Auger electron spectroscopy and Raman spectroscopy, both techniques having different surface sensitivities. From all these results, it is derived that incomplete electrochemical reactions occurred during the growth of the coatings. This led to rather complex compositions, in which defective cerium oxides are the major species. In addition, hydroxides, carbonates and nitrates are also present, together with adsorbed water. © 2011 Elsevier B.V. All rights reserved., L.M. and E.R. acknowledge the Spanish Ministerio de Ciencia e Innovación (CSD2007-00041, MAT2008-01497/NAN, CIT-420000-2009-53).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of friction on the surface characteristics of EPDM elastomers with different carbon black contents

  • Martínez Orellana, Lidia
  • Nevshupa, Roman
  • Felhos, D.
  • Segovia, J. L. de
  • Román García, Elisa Leonor
[EN] Tribological properties and surface characteristics of ethylenepropylene- diene elastomers were studied as a function of carbon black (CB) content. The surface analysis was performed inside and outside the wear track by X-ray photoelectron spectroscopy (XPS) in order to evaluate possible compositional changes produced by rubbing. Carbon black content had only a small influence on the surface chemistry of the unworn surfaces. However, on the surfaces subjected to friction, the oxygen concentration decreased with increasing CB content. Neither the surface analysis by XPS nor the wettability tests revealed important thermal degradation of the polymer in these friction tests. © 2011 Elsevier Ltd. All rights reserved., financial support of the EU from the 6th Framework Programme in the KRISTAL project no. 515837-2. L.M. and E.R. acknowledge the Nanoselect project (CSD2007-00041). L.M., R.N. and E.R. also acknowledge the financial support from the Spanish Ministry for Science and Innovation within the CaTri project (CIT-420000-2009-53) and R.N. acknowledges a ‘‘Ramón y Cajal’’ Grant (RYC-2009-04125) from the Spanish Ministry for Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Nanostructuring of epitaxial graphene layers on SiC by means of field-induced atomic force microscopy modification

  • Rius, Gemma
  • Camara, Nicolas
  • Godignon, Philippe
  • Perez Murano, Francesc X.
  • Mestres, Narcís
Micrometer-size graphene ribbons are generated by epitaxial growth on SiC substrates and contacted by electron beam lithography. The isolated graphene islands are patterned at nanometer scale by atomic force microscopy (AFM) under the application of an external polarization to the graphene layers. Contrary to previous reports, the patterning can be made at positive and negative polarizations and using significantly lower absolute voltages. The technique is used to tune the electrical resistance of the graphene ribbons. Combination of graphitization of SiC and AFM nanopatterning is, in consequence, a powerful approach for the fabrication of prototyped graphene-based nanoelectronic devices. © 2009 American Vacuum Society., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Investigation of Long Monolayer Graphene Ribbons grown on Graphite Capped 6H-SiC (000-1)

  • Camara, Nicolas
  • Rius, Gemma
  • Huntzinger, Jean-Roch
  • Tiberj, Antoine
  • Mestres, Narcís
  • Perez Murano, Francesc X.
  • Godignon, Philippe
  • Camassel, Jean
We present an investigation of large, isolated, graphene ribbons grown on the C-face of on-axis semi-insulating 6H-SiC wafers. Using a graphite cap to cover the SiC sample, we modify the desorption of the Si species during the Si sublimation process. This results in a better control of the growth kinetics, yielding very long (about 300 microns long, 5 microns wide), homogeneous monolayer graphene ribbons. These ribbons fully occupy unusually large terraces on the step bunched SiC surface, as shown by AFM, optical microscopy and SEM. Raman spectrometry indicates that the thermal stress has been partially relaxed by wrinkles formation, visible in AFM images. In addition, we show that despite the low optical absorption of graphene, optical differential transmission can be successfully used to prove the monolayer character of the ribbons., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Strain-Driven Moire Superstructures of Epitaxial Graphene on Transition Metal Surfaces.

  • Merino, Pablo
  • Svec, Martin
  • Pinardi, Anna L.
  • Otero, Gonzalo
  • Martín-Gago, José A.
[EN] STM images of multidomain epitaxial graphene on Pt(111) have been combined with a geometrical model to investigate the origin of the coincidence Moiré superstructures. We show that there is a relation between the appearance of a particular Moiré periodicity and the minimization of the absolute value of the strain between the graphene and the substrate for the different orientations between both atomic lattices. This model predicts all the stable epitaxial graphene structures that can be grown on transition metal surfaces and we have made use of it for reproducing previously published data from different authors. Its validity suggests that minimization of the strain within the coincident graphene unit-cell due to a strong local interaction is the driving force in the formation of Moiré superstructures., We want to acknowledge financial support trough the Spanish grants: Consolider CSD2007-41; MAT2008-1497/nan and MAT2010-17720. P.M acknowledges financial support from the INTA program “Rafael Calvo Rodés”
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Graphene functionalisation with a conjugated poly(fluorene) by click coupling: Striking electronic properties in solution

  • Castelaín, Marta
  • Martínez, Gerardo
  • Merino, Pablo
  • Martín-Gago, José A.
  • Segura, José Luis
  • Ellis, Gary James
  • Salavagione, Horacio J.
[EN] Graphene flakes covalently modified with a conjugated polymer, poly[(9,9-dihexylfluorene)-co-alt-(9,9-bis-(6-azidohexyl)fluorene)] (PFA), were efficiently synthesised by a Cu-catalysed Huisgen 1,3-dipolar cycloaddition between alkyne-modified graphene and an azide-functionalised polymer. Two approaches for the modification of graphene with alkyne groups were investigated (coupling with a diazonium salt generated in situ or an amidation reaction) and the optimum conditions determined. The success of the click-coupling approach was confirmed by FTIR, 1H NMR, Raman, and X-ray photoelectron spectroscopy (XPS). The absorption and emission spectra of the click product show a strong solvent dependency. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim., Financial support from the Spanish Ministry of Science and Innovation, MICINN (MAT2009-09335, CTQ2010-14982, CSD2007-41, MAT2008- 1497nan and MAT2010-17720), and the Comunidad Autónoma de Madrid (S2009/MAT-1467) and UCM-BSCH (GR58/08) are gratefully acknowledged. H.J.S thanks MICINN for a Ramón & Cajal Fellowship. M.C is indebted to the CSIC for a JAE-predoc fellowship. P.M acknowledges financial support by the "Rafael Calvo Rodés" scholaship program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Large-area high-throughput synthesis of monolayer graphene sheet by Hot filament thermal chemical vapor deposition

  • Hawaldar, Ranjit
  • Merino, Pablo
  • Correia, M. R.
  • Bdikin, Igor
  • Grácio, José
  • Méndez, J.
  • Martín-Gago, José A.
  • Singh, Manoj Kumar
[EN] We report hot filament thermal CVD (HFTCVD) as a new hybrid of hot filament and thermal CVD and demonstrate its feasibility by producing high quality large area strictly monolayer graphene films on Cu substrates. Gradient in gas composition and flow rate that arises due to smart placement of the substrate inside the Ta filament wound alumina tube accompanied by radical formation on Ta due to precracking coupled with substrate mediated physicochemical processes like diffusion, polymerization etc., led to graphene growth. We further confirmed our mechanistic hypothesis by depositing graphene on Ni and SiO 2/Si substrates. HFTCVD can be further extended to dope graphene with various heteroatoms (H, N, and B, etc.,), combine with functional materials (diamond, carbon nanotubes etc.,) and can be extended to all other materials (Si, SiO 2, SiC etc.,) and processes (initiator polymerization, TFT processing) possible by HFCVD and thermal CVD., This research work was supported by the grant received by Manoj Kumar Singh from FCT (Grant No. PTDC/CTM-NAN/121108/2010), Ministry of Science and Technology, Portugal. Ranjit Hawaldar expresses his gratitude to FCT for supporting through Postdoctoral Grant SFRH/BPD/79016/2011. The author M.R Correia thanks the financial support from FCT (Grant No. PEst-C/CTM/LA0025/2011). Grants from the Spanish administration CSD2007-41, MAT2011-534 are also acknowledged. P M acknowledges financial support by the ‘‘Rafael Calvo Rodes’’, scholarship program.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Magnetostructural coupling, magnetic ordering, and cobalt spin reorientation in metallic P r0.5 S r0.5Co O3 cobaltite

  • García-Muñoz, J.L.
  • Padilla-Pantoja, J.
  • Torrelles, X.
  • Blasco, J.
  • Herrero-Martín, J.
  • Bozzo, B.
  • Rodríguez-Velamazán, J.A.
In half-doped Pr0.50A0.50CoO3 metallic perovskites, the spin-lattice coupling brings about distinct magnetostructural transitions for A=Ca and A=Sr at temperatures close to ~100 K. However, the ground magnetic properties of Pr0.50Sr0.50CoO3 (PSCO) strongly differ from Pr0.50Ca0.50CoO3 ones, where a partial Pr3+ to Pr4+ valence shift and Co spin transition makes the system insulating below the transition. This paper investigates and describes the relationship between the Imma¿I4/mcm symmetry change [Padilla-Pantoja, García-Muñoz, Bozzo, Jirák, and Herrero-Martín, Inorg. Chem. 53, 12297 (2014)] and the original magnetic behavior of PSCO versus temperature and external magnetic fields. The FM1 and FM2 ferromagnetic phases, above and below the magnetostructural transition (TS1~120K) have been investigated. The FM2 phase of PSCO is composed of [100] FM domains, with magnetic symmetry Im'm'a (mx¿0, mz=0). The magnetic space group of the FM1 phase is Fm'm'm (with mx=my). Neutron data analyses in combination with magnetometry and earlier reports results agrees with a reorientation of the magnetization axis by 45° within the ab plane across the transition, in which the system retains its metallic character. The presence below TS1 of conjugated magnetic domains, both of Fm'm'm symmetry but having perpendicular spin orientations along the diagonals in the xy plane of the tetragonal unit cell, is at the origin of the anomalies observed in the macroscopic magnetization. A relatively small field µ0H[¿z]¿30mT is able to reorient the magnetization within the ab plane, whereas a higher field (µ0H[¿z]¿1.2T at 2 K) is necessary to align the Co moments perpendicular to the ab plane. Such a spin reorientation, in which the orbital and spin components of the Co moment rotate joined by 45°, was not observed previously in analogous cobaltites without praseodymium.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Competition between Superconductor-Ferromagnetic stray magnetic fields in YBa2Cu3O7-x films pierced with Co nano-rods

  • Rouco, V.
  • Córdoba, R.
  • De Teresa, J.M.
  • Rodríguez, L.A.
  • Navau, C.
  • Del-Valle, N.
  • Via, G.
  • Sánchez, A.
  • Monton, C.
  • Kronast, F.
  • Obradors, X.
  • Puig, T.
  • Palau, A.
Superconductivity and ferromagnetism are two antagonistic phenomena that combined can lead to a rich phenomenology of interactions, resulting in novel physical properties and unique functionalities. Here we propose an original hybrid system formed by a high-Temperature superconducting film, patterned with antidots, and with ferromagnetic nano-rods grown inside them. This particular structure exhibits the synergic influence of superconductor (SC)-ferromagnetic (FM) stray fields, in both the superconducting behaviour of the film and the three-dimensional (3D) magnetic structure of nano-rods. We show that FM stray fields directly influence the critical current density of the superconducting film. Additional functionalities appear due to the interaction of SC stray fields, associated to supercurrent loops, with the non-Trivial 3D remanent magnetic structure of FM nano-rods. This work unravels the importance of addressing quantitatively the effect of stray magnetic fields from both, the superconductor and the ferromagnet in hybrid magnetic nano-devices based on high temperature superconductors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Emerging Diluted Ferromagnetism in High-T-c Superconductors Driven by Point Defect Clusters

  • Gazquez, J.
  • Guzman, R.
  • Mishra, R.
  • Bartolome, E.
  • Salafranca, J.
  • Magen, C.
  • Varela, M.
  • Coll, M.
  • Palau, A.
  • Valvidares, S.M.
  • Gargiani, P.
  • Pellegrin, E.
  • Herrero-Martin, J.
  • Pennycook, S.J.
  • Pantelides, S.T.
  • Puig, T.
  • Obradors, X.
Defects in ceramic materials are generally seen as detrimental to their functionality and applicability. Yet, in some complex oxides, defects present an opportunity to enhance some of their properties or even lead to the discovery of exciting physics, particularly in the presence of strong correlations. A paradigmatic case is the high-temperature superconductor YBa2Cu3O7-delta(Y123), in which nanoscale defects play an important role as they can immobilize quantized magnetic flux vortices. Here previously unforeseen point defects buried in Y123 thin films that lead to the formation of ferromagnetic clusters embedded within the superconductor are unveiled. Aberration-corrected scanning transmission microscopy has been used for exploring, on a single unit-cell level, the structure and chemistry resulting from these complex point defects, along with density functional theory calculations, for providing new insights about their nature including an unexpected defect-driven ferromagnetism, and X-ray magnetic circular dichroism for bearing evidence of Cu magnetic moments that align ferromagnetically even below the superconducting critical temperature to form a dilute system of magnetic clusters associated with the point defects.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Orientation symmetry breaking in self-assembled Ce1-xGdxO2-y nanowires derived from chemical solutions

  • Queralto, A.
  • de la Mata, M.
  • Martinez, L.
  • Magen, C.
  • Gibert, M.
  • Arbiol, J.
  • Huhne, R.
  • Obradors, X.
  • Puig, T.
Understanding the growth mechanisms of nanostructures obtained from chemical solutions, a highthroughput production methodology, is essential to correlate precisely the growth conditions with the nanostructures'' morphology, dimensions and orientation. It is shown that self-organized (011)-oriented Ce0.9Gd0.1O2-y (CGO) nanowires having a single in-plane orientation are achieved when an anisotropic (011)-LaAlO3 (LAO) substrate is chosen. STEM and AFM images of the epitaxial nanowires reveal the (001) CGO[ 0-11]parallel to(011) LAO[100] growth orientation, with the enlargement occurring along the [0-11] CGO direction with (111) lateral facets. The chosen substrate allowed us to study a unique case where the resulting biaxial strain is isotropic, while the dissimilar lateral surface energies are the key factor to obtain an energetically imbalanced and non-degenerated nanowire configuration. Rapid Thermal Annealing (RTA) has allowed sorting of experimental nucleation from coarsening and analysis of the kinetic phenomena of the nanowires. A thermodynamic driving force is shown to exist for a continuous elongation of the nanowires while the coarsening rates are found to be strongly temperature dependent and so kinetic effects are the key factors to control the size and density of the self-organized nanowire system. A remarkably fast nanowire growth rate (14-40 nm min(-1)) is observed, which we associate with a high atomic mobility probably linked to a high concentration of oxygen vacancies, as detected by XPS. These nanowires are envisaged as model systems pushing forward the study of low energetic and highly oxygen deficient {111} lateral facets useful for catalysis, gas sensors and ionic conductivity applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Strain-driven broken twin boundary coherence in YBa2Cu3O7−δ nanocomposite thin films

  • Guzman, R.
  • Gazquez, J.
  • Rouco, V.
  • Palau, A.
  • Magén, C.
  • Varela, M.
  • Arbiol, J.
  • Obradors, X.
  • Puig, T.
In this letter we use high resolution scanning transmission electron microscopy to study epitaxial YBa2Cu3O7-d (YBCO) nanocomposite thin films. We find that twin boundaries (TB) in YBCO nanocomposite thin films are disturbed by the presence of secondary phase nanoparticles as well as by intergrowths. Secondary phases promote the nucleation of TBs and, at the same time, result in bending, decreasing and changing the TB's spacing. On the other hand, the local strain ensuing from the partial dislocation associated to Y248 and Y125 intergrowths break the vertical coherence of TBs. This interaction results in a complex domain structure where twin boundary coherence is no longer satisfied and twin spacing is reduced down to a few nanometers precluding vortex channeling at low temperatures.
Docta Complutense
Publication Artículo científico (JournalArticle)

In-situ particles reorientation during magnetic hyperthermia application: Shape matters twice

  • Simeonidis, Konstantinos
  • Puerto Morales Herrero, María Del
  • Marciello, Marzia
  • Angelakeris, Makis
  • Presa Muñoz De Toro, Patricia Marcela De La
  • Lázaro Carrillo, Ana
  • Tabero Truchado, Andrea
  • Villanueva Oroquieta, Ángeles
  • Chubykalo-Fesenko, Oksana
  • Serantes Abalo, David
Promising advances in nanomedicine such as magnetic hyperthermia rely on a precise control of the nanoparticle performance in the cellular environment. This constitutes a huge research challenge due to difficulties for achieving a remote control within the human body. Here we report on the significant double role of the shape of ellipsoidal magnetic nanoparticles (nanorods) subjected to an external AC magnetic field: first, the heat release is increased due to the additional shape anisotropy; second, the rods dynamically reorientate in the orthogonal direction to the AC field direction. Importantly, the heating performance and the directional orientation occur in synergy and can be easily controlled by changing the AC field treatment duration, thus opening the pathway to combined hyperthermic/mechanical nanoactuators for biomedicine. Preliminary studies demonstrate the high accumulation of nanorods into HeLa cells whereas viability analysis supports their low toxicity and the absence of apoptotic or necrotic cell death after 24 or 48 h of incubation.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Conical antiferromagnetic order in the ferroelectric phase of Mn0.8Co0.2WO4 resulting from the competition between collinear and cycloidal structures

  • Urcelay Olabarria, Irene
  • Ressouche, Eric
  • Mukhin, A. A.
  • Ivanov, Vsevolod|||0000-0001-6096-6884
  • Balbashov, A. M.
  • García-Muñoz, José Luis|||0000-0002-4174-2794
  • Skumryev, Vassil Hristov|||0000-0003-1375-4824
Evolution of competing commensurate collinear (AF4) and incommensurate cycloidal (AF2) magnetic structures in Mn0.8Co0.2WO4 multiferroic was studied by neutron diffraction, magnetic, and pyroelectric characterization measurements. In contrast to pure and slightly Co doped MnWO4, the antiferromagnetic AF4 collinear phase [k1=(1/2,0,0)] inherent to the pure CoWO4 was observed below Néel temperature TN≈20 K in Mn0.8Co0.2WO4. This collinear order survives down to the lowest temperature reached in the experiments (2 K) even after the appearance of the second (cycloidal AF2) spin order below TFE≈8.5 K [k2=(-0.211,1/2,0.452)]. Ferroelectric polarization along b axis was revealed below TFE in the low temperature conical phase resulting from the superposition of the AF4 and AF2 spin structures. The arrangement of the spins after the two successive magnetic transitions are thoroughly described. In particular, we found that spins in the AF4 phase are aligned along the easy direction in the ac plane (∼142∘ with respect to the c* axis), while the cycloidal AF2 spin order is developed in the magnetically hard directions, perpendicular to the easy one, and consequently the TFE decreases compared to the pure MnWO4.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Neutron diffraction, magnetic, and magnetoelectric studies of phase transitions in multiferroic Mn0.90Co0.10WO4

  • Urcelay Olabarria, Irene
  • Ressouche, Eric
  • Mukhin, A. A.
  • Ivanov, Vsevolod|||0000-0001-6096-6884
  • Balbashov, A. M.
  • Vorobev, G. P.
  • Popov, Yu F.
  • Kadomtseva, A. M.
  • García-Muñoz, José Luis|||0000-0002-4174-2794
  • Skumryev, Vassil Hristov|||0000-0003-1375-4824
We have studied various spontaneous and magnetic-field-induced phase transitions in single crystals of multiferroic Mn0.9Co0.1WO4 using magnetic and magnetoelectric measurements and neutron diffraction. Compared to pure MnWO4, our data consistently confirm that the anisotropic Co2+ ions induce reorientation of the spin cycloid structure to the ac plane and reveal Pa and Pc components of spontaneous electric polarization.Field-induced phase transitions accompanied by anomalies of magnetic susceptibility and suppression of both Pa and Pc polarizations have been observed for H∥c (∼3 T) and H∥a (∼8.5 T). Neutron diffraction has revealed that in both cases the spin cycloid plane flops in direction almost perpendicular to H, i.e., close to the ab and bc planes, respectively. Parameters describing the magnetic structures including wave vectors, orientations of the main elliptical axes, etc., have been determined in all spontaneous and field-induced states.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Magnetoelastic coupling in La2/3Sr1/3MnO3 thin films on SrTiO3

  • Pesquera, David|||0000-0003-0681-3371
  • Skumryev, Vassil Hristov|||0000-0003-1375-4824
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Herranz Casabona, Gervasi|||0000-0003-4633-4367
  • Fontcuberta, Josep|||0000-0002-7955-2320
Clamping of epitaxial La2/3Sr1/3MnO3 (LSMO) magnetic thin films on SrTiO3 (STO) substrates is shown to promote a clear modification of their magnetic properties at the STO cubic-tetragonal transition. Two distinct mechanisms triggered by the STO transition, namely magnetic domain pattern reconstruction and creation of regions within the magnetically soft LSMO with enhanced magnetic anisotropy, are proposed to be behind the observed anomalous magnetic responses at low ac-magnetic field and at high dc-field, respectively. The persistence of these anomalies in LSMO films as thick as 220 nm shines new light into the magnetoelastic coupling mechanisms across interfaces.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Magnetization reversal by electric-field decoupling of magnetic and ferroelectric domain walls in multiferroic-based heterostructures

  • Skumryev, Vassil Hristov|||0000-0003-1375-4824
  • Laukhin, Vladimir
  • Fina, Ignasi|||0000-0003-4182-6194
  • Martí Rovirosa, Xavier
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Gospodinov, M.
  • Fontcuberta, Josep|||0000-0002-7955-2320
We demonstrate that the magnetization of a ferromagnet in contact with an antiferromagnetic multi-ferroic(LuMnO3)can be speedily reversed by electric-field pulsing, and the sign of the magnetic exchange bias can switch and recover isothermally. As LuMnO3 is not ferroelastic, our data conclusively show that this switching is not mediated by strain effects but is a unique electric-field driven decoupling of the ferroelectric and antiferromagnetic domain walls. Their distinct dynamics are essential for the observed magnetic switching.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

CoFe2O4/buffer layer ultrathin heterostructures on Si(001)

  • Bachelet, Romain
  • Coux, P. de
  • Warot-Fonrose, Bénédicte
  • Skumryev, Vassil Hristov|||0000-0003-1375-4824
  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Fontcuberta, Josep|||0000-0002-7955-2320
Epitaxial films of ferromagnetic CoFe2O4 (CFO) were grown by pulsed laser deposition on Si(001) buffered with ultrathin yttria-stabilized zirconia (YSZ) layers in a single process. Reflection high-energy electron diffraction was used to monitor in real time the crystallization of YSZ, allowing the fabrication of epitaxial YSZ buffers with thickness of about 2 nm. CFO films, with thicknesses in the 2-50 nm range were subsequently deposited. The magnetization of the CFO films is close to the bulk value. The ultrathin CFO/YSZ heterostructures have very flat morphology (0.1 nm roughness) and thin interfacial SiOx layer (about 2 nm thick) making them suitable for integration in tunnel (e.g., spin injection) devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Calibration of ac and dc magnetometers with a Dy2O3 standard

  • Chen, Du-Xing|||0000-0003-1041-7777
  • Skumryev, Vassil Hristov|||0000-0003-1375-4824
  • Bozzo, Bernat
The ac susceptibility and magnetization curves of a glued Dy2O3 powder sample are measured by an ac susceptometer and a dc superconducting quantum interference device magnetometer, both of which have been calibrated previously. It is shown that the magnetic moment of the paramagnetic sample as a function of field and temperature may be accurately expressed by a combination of the Curie-Weiss law and the Langevin function at T.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Domain matching epitaxy of ferrimagnetic CoFe2O4 thin films on Sc2O3/Si(111)

  • Sánchez Barrera, Florencio|||0000-0002-5314-453X
  • Bachelet, Romain
  • Coux, P. de
  • Warot-Fonrose, Bénédicte
  • Skumryev, Vassil Hristov|||0000-0003-1375-4824
  • Tarnawska, L.
  • Zaumseil, P.
  • Schroeder, T.
  • Fontcuberta, Josep|||0000-0002-7955-2320
Ferrimagnetic spinel CoFe2O4 (CFO) films are integrated with Si(111) using Sc2O3 buffer layers. The huge lattice mismatch (17%) between CFO and Sc2O3 is accommodated by domain matching, and CFO grows epitaxially with (111) out-of-plane orientation and coexistence of A- and B-type in-plane crystal variants. CFO films have low roughness of 4 Å and saturation magnetization of about 300 emu/cm3. These properties make CFO films on Sc2O3-buffered Si(111) comparable to those grown on oxide single crystals and thus extend the possibilities of using spinel oxides in electronic devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

NH₃ molecular doping of silicon nanowires grown along the [112], [110], [001], and [111] orientations

  • Miranda, Álvaro
  • Cartoixà, Xavier|||0000-0003-1905-5979
  • Canadell Casanova, Enric|||0000-0002-4663-5226
  • Rurali, Riccardo|||0000-0002-4086-4191
The possibility that an adsorbed molecule could provide shallow electronic states that could be thermally excited has received less attention than substitutional impurities and could potentially have a high impact in the doping of silicon nanowires (SiNWs). We show that molecular-based ex-situ doping, where NH₃ is adsorbed at the sidewall of the SiNW, can be an alternative path to n-type doping. By means of first-principle electronic structure calculations, we show that NH₃ is a shallow donor regardless of the growth orientation of the SiNWs. Also, we discuss quantum confinement and its relation with the depth of the NH₃ doping state, showing that the widening of the bandgap makes the molecular donor level deeper, thus more difficult to activate.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Unveiling the Nucleation and Coarsening Mechanisms of Solution-Derived Self-Assembled Epitaxial Ce0.9Gd0.1O2-y Nanostructures

  • Queraltó López, Albert
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Hühne, Ruben
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
Self-Assembling approaches based on chemical solution deposition (CSD) are ideal methods for the cost-effective production of epitaxial nanostructures with high throughput. Therefore, an in-depth investigation of the nucleation and coarsening processes involved in the self-Assembly of nanostructures is mandatory to achieve a good control over nanostructure shape, dimensions, and orientation. Heteroepitaxial CeGdO (CGO) is an ideal model system to unveil the underlying nanostructure development mechanisms in addition to their promising properties for catalysis, gas sensors, and ionic conductivity. Rapid thermal annealing furnaces have been used to study separately the thermodynamic and kinetic nucleation and coarsening mechanisms of self-Assembled CGO isotropic and anisotropic nanostructures based on strain-engineering and surface energies control. Different CGO nanoislands are obtained: isotropic (001)CGO nanodots are grown on (001)-oriented YO:ZrO(YSZ) and LaAlO (Lao) substrates, whereas (011)Lao substrates promote the growth of elongated (011)CGO nanowires. HRTEM and RHEED analyses are used to study the early stages of nucleation, as well as the shape and interfacial structure of CGO nanostructures. A systematic study with the heating ramp, annealing temperature and time, and strain in combination with thermally activated theoretical models provides information on the nucleation behavior, nucleation barriers, and atomic diffusion coefficients along in-plane and out-of-plane island orientations. Highly anisotropic atomic diffusion constants have been shown to be at the origin of the high aspect ratios of some of the nanostructures. Overall, our study provides a general method for the evaluation of nucleation and coarsening of multiple CSD-derived oxide nanostructures and understanding the shape development by combining thermodynamic and kinetic approaches.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ultrafast Epitaxial Growth Kinetics in Functional Oxide Thin Films Grown by Pulsed Laser Annealing of Chemical Solutions

  • Queraltó López, Albert
  • Pérez del Pino, Ángel|||0000-0002-1405-6027
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Tristany, Mar
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
The crystallization process and physical properties of different functional oxide thin films (CeZrO, LaNiO, BaSrTiO, and LaSrMnO) on single crystal substrates (YO:ZrO, LaAlO, and SrTiO) are studied by pulsed laser annealing (PLA). A Nd:YAG laser source (λ = 266 nm, 10 Hz and τ ∼3 ns) is employed to crystallize chemical solution deposited (CSD) amorphous/nanocrystalline films under atmospheric conditions. We provide new insight on the influence of photochemical and photothermal interactions on the epitaxial crystallization kinetics of oxide thin films during the transformation from amorphous/polycrystalline material (i.e., atomic diffusion, epitaxial growth rates, and activation energies of nucleation and crystallization). The epitaxial growth is investigated by varying the laser fluence and the applied number of pulses. The morphology, structure, and epitaxial evolution of films are evaluated by means of atomic force and transmission electron microscopies and X-ray diffraction. Highly epitaxial oriented films of 20-40 nm in thickness are obtained by PLA. The crystallization kinetics of laser treatments is determined to be orders of magnitude faster than thermal treatments with similar activation energies (1.5-4.1 eV), mainly due to the large temperature gradients inducing modified atomic diffusion mechanisms derived mainly from photothermal interactions, as well as a minor contribution of photochemical effects. The fast heating rates achieved by PLA also contribute to the fast epitaxial growth due to reduced coarsening of polycrystalline material. The measurement of the physical properties (electrical resistivity and magnetism) of laser processed CSD films has revealed significantly good functionalities, close to those of thermally grown films, but with much shorter processing times.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Ultraviolet pulsed laser crystallization of Ba0.8Sr0.2TiO3 films on LaNiO3-coated silicon substrates

  • Queraltó López, Albert
  • Pérez del Pino, Ángel|||0000-0002-1405-6027
  • De La Mata, Maria|||0000-0002-1581-4838
  • Tristany, Mar
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Trolier-McKinstry, Susan
In this work, BaSrTiO (BST) films on LaNiO-buffered SiO/Si (LNO/SiO/Si) substrates were crystallized by pulsed laser irradiation. Solution-derived amorphous barium-strontium-titanate precursor layers were crystallized with a KrF excimer laser in oxygen ambient at fluences ranging from 50 to 75 mJ cm. With the substrate temperature set to 500 °C, the number of pulses and film thickness were varied until high-quality crystallinity could be achieved. It was found that films with a thickness of 40 nm are fully crystallized with a uniaxial {00l} orientation which is predetermined by the LaNiO orientation. On the other hand, for 160 nm thick films, crystallization was observed after 12,000 pulses in the 70 nm close to the surface, while the rest of the film remained amorphous. The large temperature difference between the film surface and interface due to the low thermal conductivity of the amorphous BST is suggested as the origin of this behavior. Films thicker than 80 nm cracked on crystallization due to the stress caused by the different thermal expansion coefficients of film and substrate, as well as the large temperature variations within the BST film.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Disentangling Epitaxial Growth Mechanisms of Solution Derived Functional Oxide Thin Films

  • Queraltó López, Albert
  • De La Mata, Maria|||0000-0002-1581-4838
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
This study investigates the mechanisms of epitaxial development and functional properties of oxide thin films (CeZrO , LaNiO, and BaSrTiO) grown on single crystal substrates (YO:ZrO, LaAlO, and SrTiO) by the chemical solution deposition approach. Rapid thermal annealing furnaces are very powerful tools in this study providing valuable information of the early stages of nucleation, the kinetics of epitaxial film growth, and the coarsening of nanocrystalline phases. Advanced transmission electron microscopies, X-ray diffraction, and atomic force microscopy are employed to investigate the film microstructure and morphology, microstrain relaxation, and epitaxial crystallization. This study demonstrates that the isothermal evolution toward epitaxial film growth follows a self-limited process driven by atomic diffusion, and surface and interface energy minimization. All investigated oxides experience a transformation from the polycrystalline to the epitaxial phase. This study unequivocally evidences that the film thickness highly influences the epitaxial crystallization rate due to the competition between heterogeneous and homogeneous nucleation barriers and the fast coarsening of polycrystalline grains as compared to epitaxial growth. The investigated films possess good functional properties, and this study successfully confirms an improvement at long annealing times that can be correlated with grain boundary healing processes. Thick epitaxial films can be crystallized by growing sequential individual epitaxial layers.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Orientation symmetry breaking in self-assembled Ce1-, XGdxO2- y nanowires derived from chemical solutions

  • Queraltó López, Albert
  • De La Mata, Maria|||0000-0002-1581-4838
  • Martínez Orellana, Lidia|||0000-0002-9370-2962
  • Magen Dominguez, Cesar|||0000-0002-6761-6171
  • Gibert, Marta|||0000-0001-8856-6831
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Hühne, Ruben
  • Obradors, Xavier|||0000-0003-4592-7718
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
Understanding the growth mechanisms of nanostructures obtained from chemical solutions, a high-throughput production methodology, is essential to correlate precisely the growth conditions with the nanostructures' morphology, dimensions and orientation. It is shown that self-organized (011)-oriented Ce₀.₉Gd₀.₁O₂ᵧ (CGO) nanowires having a single in-plane orientation are achieved when an anisotropic (011)-LaAlO₃ (LAO) substrate is chosen. STEM and AFM images of the epitaxial nanowires reveal the (001)CGO[0-11](011)LAO[100] growth orientation, with the enlargement occurring along the [0-11]CGO direction with (111) lateral facets. The chosen substrate allowed us to study a unique case where the resulting biaxial strain is isotropic, while the dissimilar lateral surface energies are the key factor to obtain an energetically imbalanced and non-degenerated nanowire configuration. Rapid Thermal Annealing (RTA) has allowed sorting of experimental nucleation from coarsening and analysis of the kinetic phenomena of the nanowires. A thermodynamic driving force is shown to exist for a continuous elongation of the nanowires while the coarsening rates are found to be strongly temperature dependent and so kinetic effects are the key factors to control the size and density of the self-organized nanowire system. A remarkably fast nanowire growth rate (14-40 nm min⁻¹) is observed, which we associate with a high atomic mobility probably linked to a high concentration of oxygen vacancies, as detected by XPS. These nanowires are envisaged as model systems pushing forward the study of low energetic and highly oxygen deficient {111} lateral facets useful for catalysis, gas sensors and ionic conductivity applications.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A quasistatic magnetic cloak

  • Souc, Ján
  • Solovyov, Mykola|||0000-0002-1014-5938
  • Gömöry, Fedor|||0000-0002-2278-5123
  • Prat Camps, Jordi|||0000-0003-4306-0874
  • Navau, Carles|||0000-0003-4763-5305
  • Sánchez Moreno, Álvaro|||0000-0002-2988-0289
Cloaking a three-dimensional object in free space from electromagnetic waves has recently become a theoretical possibility, although practical implementations can only be made in reduced schemes. If static fields are involved, requirements are less restrictive and some practical realizations have been possible. Here we present a third regime between the full wave and the static cases. We experimentally demonstrate that a cloak constructed under the dc conditions can keep cloaking properties for applied magnetic fields oscillating at low frequencies (up to hundreds of Hz). Because electromagnetic technology works at these frequencies, applications of our ideas to present technology are discussed.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Transport critical-current density of superconducting films with hysteretic ferromagnetic dots

  • Valle, Nuria del|||0000-0003-2608-5009
  • Navau, Carles|||0000-0003-4763-5305
  • Sánchez Moreno, Álvaro|||0000-0002-2988-0289
  • Dinner, Rafael B.
Superconductor-ferromagnet hybrids present a rich and complex phenomenology. Particularly, a hysteretic behavior on the transport critical-current density, as a function of a uniform perpendicular applied field, has been experimentally found in superconducting films with some embedded ferromagnets. Here we analyze the interaction superconductor-ferromagnets by means of an iterative model based on the critical-statemodel with field-dependent internal critical-current density and compare the results with actual transport measurements. By using arguments of field compensation, we show how the change in the magnetization of the ferromagnetic inclusions is responsible for the observed hysteresis on the transport critical current.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Magnetic vortex evolution in self-assembled La₀.₇Sr₀.₃MnO₃ nanoislands under in-plane magnetic field

  • Zabaleta Llorens, Jone
  • Jaafar, Míriam|||0000-0002-9086-6187
  • Asenjo, Agustina|||0000-0001-6524-9702
  • Agramunt Puig, Sebastià|||0000-0002-3627-2820
  • Valle, Nuria del|||0000-0003-2608-5009
  • Navau, Carles|||0000-0003-4763-5305
  • Sánchez Moreno, Álvaro|||0000-0002-2988-0289
  • Puig i Molina, Mª Teresa|||0000-0002-1873-0488
  • Obradors, Xavier|||0000-0003-4592-7718
  • Mestres i Andreu, Narcís|||0000-0001-6468-4227
The magnetic vortex formation at room temperature and its evolution under in-plane magnetic field is studied in chemically grown self-assembled La₀.₇Sr₀.₃MnO₃ nanoislands of less than 200 nm in width. We use variable field magnetic force microscopy and numerical simulations to confirm that the vortex state is ubiquitous in these square-base pyramid shape epitaxial LaSrMnO nanostructures, and that it requires in-plane magnetic fields below 40 kA/m to be annihilated.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Solid state dye sensitized solar cells applying conducting organic polymers as hole conductors

  • Yu, Youhai
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Solid-state dye sensitized solar cells (SSDSCs) applying mesoporous TiO electrodes sensitized with Ru complex dye Z907 and conducting organic polymers as the hole transport material (HTM) are prepared. We employ the in-situ photo-electrochemically polymerization technique (PEP)[1-3] in order to obtain, in a single step, the conducting organic polymer on the TiO /Dye electrode. We developed a modification of reported method [2] which allows the polymer poly(3,4-ethylenedioxythiophene) (PEDOT) by different electrochemical techniques applying constant-voltage and constant-current methods. Polymer morphology and its influence on solar cell performance were studied. Overall conversion efficiency above 2% (AM 1.5, 100 mW cm) was obtained.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Effect of testing conditions on the photovoltaic performance of ZnO-based dye sensitized solar cells

  • González Valls, Irene
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Dye-sensitized solar cells based on vertically-aligned ZnO nanorod, were analyzed at different conditions. Stability tests showed an improvement on solar conversion efficiency between ∼20% (1000 W/m) and ∼50% (1800 W/m). This behavior was ascribed to the physisorption/ chemisorption of the N-719 dye on the ZnO due to UV light. Studies at different temperatures proved that the performance of the cells can double when decreasing temperature from 72°C to room temperature. An increase on the efficiency and decrease in FF was observed when light intensity is increased. IPCE analyses were used to monitor the stability of the solar cells with time.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Low-temperature, solution-processed, layered V2 O5 hydrate as the hole-transport layer for stable organic solar cells

  • Teran Escobar, Gerardo
  • Pampel, Jonas|||0000-0003-3370-1148
  • Caicedo Roque, Jose Manuel|||0000-0002-5192-4989
  • Lira-Cantu, Monica|||0000-0002-3393-7436
Layered V O hydrate has been applied as the hole transport layer (HTL) in organic solar cells (OSCs). V O is obtained from a sodium metavanadate solution in water under ambient conditions, resulting in a final thin film of formula V O ·0.5H O. The 0.5 water molecules are not removed from the V O layered structure unless the sample is heated above 250 °C, which makes the thin film highly stable under real working conditions. The HTL was used in OSCs in the normal and the inverted configurations, applying metallic Ag as the back-metal electrode in both cases. Fabrication of both OSC configurations completely by solution-processing printing methods in air is possible, since the Al electrode needed for the normal-configuration OSC is not required. The work function (WF) and band gap energy (BG) of the V O thin films were assessed by XPS, UPS and optical analyses. Different WF values were observed for V O prepared from a fresh V O -isopropanol (IPA) solution (5.15 eV) and that prepared from a 24 h-old solution (5.5 eV). This difference is due to the gradual reduction of vanadium (from V to V ) in IPA. The OSCs made with the V O thin film obtained from the 24 h-old V O -IPA solution required photo-activation, whereas those made with the freshly obtained V O did not. Outdoor stability analyses of sealed OSCs containing a V O HTL in either configuration revealed high stability for both devices: the photovoltaic response at T was retained for more than 1000 h.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A new reversal mode in exchange coupled antiferromagnetic/ferromagnetic disks, Distorted viscous vortex

  • Gilbert, Dustin A.
  • Ye, Li
  • Varea Espelt, Aïda
  • Agramunt Puig, Sebastià|||0000-0002-3627-2820
  • Valle, Nuria del|||0000-0003-2608-5009
  • Navau, Carles|||0000-0003-4763-5305
  • López-Barbera, José Francisco|||0000-0002-9475-625X
  • Buchanan, K. S.
  • Hoffmann, Axel
  • Sánchez Moreno, Álvaro|||0000-0002-2988-0289
  • Sort, Jordi|||0000-0003-1213-3639
  • Liu, Kai|||0000-0001-9413-6782
  • Nogués, Josep|||0000-0003-4616-1371
Magnetic vortices have generated intense interest in recent years due to their unique reversal mechanisms, fascinating topological properties, and exciting potential applications. In addition, the exchange coupling of magnetic vortices to antiferromagnets has also been shown to lead to a range of novel phenomena and functionalities. Here we report a new magnetization reversal mode of magnetic vortices in exchange coupled Ir<inf.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Interfaces and nanostructures of functional oxide octahedral framework structures

  • Sandiumenge Ortiz, Felip|||0000-0003-1336-1529
  • Bagués, Núria|||0000-0002-9360-0915
  • Santiso, José|||0000-0003-4274-2101
In the past decade, the rich physics exhibited by solid interfaces combining octahedral framework structures of transition-metal oxides has fascinated the materials science community. However, their behavior still eludes the current understanding of classical semiconductor and metal epitaxy. The reason for that is rooted in the surprising versatility of linked coordination units to adapt to a dissimilar substrate and the strong sensitivity of strongly correlated electron oxides to external perturbations. The confluence of atomic control in oxide thin film epitaxy, state of the art high spatial resolution characterization techniques, and electronic-structure computations, has allowed in recent years to obtain first insights on the microscopic mechanisms governing the epitaxy of these complex materials.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Application of MEH-PPV/SnO2 bilayer as hybrid solar cell

  • Ayllón, José A.|||0000-0001-7965-7424
  • Lira-Cantu, Monica|||0000-0002-3393-7436
The applications of conducting organic polymers in combination with semiconductor oxides are promising candidates as active materials for air-stable hybrid electronic applications such as transistors, light emitting diodes or organic photovoltaics. In this work, we report our last results on the application of SnO thin films in all solid-state hybrid solar cells. We also compare the results with other five solar cells developed in our laboratories applying MEH-PPV and semiconductor oxides like TiO, NbO, ZnO, CeO or CeO-TiO . In this work, SnO thin films, obtained from sol-gel solutions, have been applied in HSC in a configuration ITO/SnO /MEH-PPV/Ag. The effects of factors, such as UV light, polymer thickness, stabilization in the dark and performance under irradiation conditions, have been investigated. Open circuit voltage and short circuit current values were about -0.45 V and 0.17 mA/cm, with fill factors around 30%. Photoaction spectra show the activity of the semiconductor oxide below 340 nm and about 490 nm for the polymer. Lifetime behavior of the HSC showed an initial increase in current density reaching a maximum after about 1 h of irradiation. Blocking the UV-wavelength range by the application of a filter showed no significant difference in HSC properties with respect to the sample without UV filter. Comparison with other 5 semiconductor oxides revealed a direct relation between semiconductor oxide applied and V from the solar cell.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Spin transport in dangling-bond wires on doped H-passivated Si(100)

  • Kepenekian, Mikaël|||0000-0001-5192-5896
  • Robles, Roberto|||0000-0001-7808-0395
  • Rurali, Riccardo|||0000-0002-4086-4191
  • Lorente, Nicolás
New advances in single-atom manipulation are leading to the creation of atomic structures on H-passivated Si surfaces with functionalities important for the development of atomic and molecular based technologies. We perform total-energy and electron-transport calculations to reveal the properties and understand the features of atomic wires crafted by H removal from the surface. The presence of dopants radically change the wire properties. Our calculations show that dopants have a tendency to approach the dangling-bond wires, and in these conditions, transport is enhanced and spin selective. These results have important implications in the development of atomic-scale spintronics showing that boron, and to a lesser extent phosphorous, convert the wires in high-quality spin filters.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Giant reversible nanoscale piezoresistance at room temperature in Sr₂IrO₄ thin films

  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • López-Mir, Laura|||0000-0002-5279-8849
  • Paradinas, Markos|||0000-0003-1006-9506
  • Holy, Vaclav
  • Železný, Jakuv
  • Yi, Di
  • Suresha, Siriyara J.
  • Liu, Jian|||0000-0003-4199-1296
  • Rayan Serrao, Claudy
  • Ramesh, Ramamoorthy
  • Ocal García, Carmen|||0000-0001-8790-8844
  • Martí Rovirosa, Xavier
  • Catalan, Gustau|||0000-0003-0214-4828
Layered iridates have been the subject of intense scrutiny on account of their unusually strong spin-orbit coupling, which opens up a narrow bandgap in a material that would otherwise be a metal. This insulating state is very sensitive to external perturbations. Here, we show that vertical compression at the nanoscale, delivered using the tip of a standard scanning probe microscope, is capable of inducing a five orders of magnitude change in the room temperature resistivity of Sr₂IrO₄. The extreme sensitivity of the electronic structure to anisotropic deformations opens up a new angle of interest on this material, with the giant and fully reversible perpendicular piezoresistance rendering iridates as promising materials for room temperature piezotronic devices.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tunneling and electronic structure of the two-gap superconductor MgB2

  • Silva-Guillén, Jose Angel|||0000-0002-0483-5334
  • Noat, Y.
  • Cren, T.
  • Sacks, W.
  • Canadell Casanova, Enric|||0000-0002-4663-5226
  • Ordejon, Pablo|||0000-0002-2353-2793
A combined experimental (superconductor-insulator-superconductor tunneling spectra) and theoretical (density functional theory) study of the two-gap superconductor MgB2 is reported. The calculations confirm that the small gap is associated with a π band mostly based on the boron pz orbitals leading to the three-dimensional band component of the Fermi surface. This channel almost completely dominates the tunneling images and spectra for c-axis-oriented samples and not the two-dimensional σ band. The origin of this effect is due to the faster decay of the electronic states associated with the boron px and py orbitals compared to those associated with the boron pz orbitals, together with the symmetry properties of the wave functions. The calculated tunneling channels and partial density of states for each band agree with the values deduced from precise fits of experimental tunneling spectra. The present approach provides a framework for the understanding of tunneling spectra and the nature of superconducting gaps of other multigap superconductors.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Quasiparticle spectra of 2H-NbSe2, two-band superconductivity and the role of tunneling selectivity, Multigap superconductivity and tunneling selectivity of 2H-NbSe2 : theory and experiment

  • Noat, Y.
  • Silva-Guillén, Jose Angel|||0000-0002-0483-5334
  • Cren, T.
  • Cherkez, V.
  • Brun, C.
  • Pons, S.
  • Debontridder, F.
  • Roditchev, D.
  • Sacks, W.
  • Cario, L.
  • Ordejon, Pablo|||0000-0002-2353-2793
  • Garcia, Alberto|||0000-0001-5138-9579
  • Canadell Casanova, Enric|||0000-0002-4663-5226
We have studied the superconducting state of 2H-NbSe2 by scanning tunneling spectroscopy along two different crystal orientations, the c and the a/b axes. Along the c axis a large gap is dominant in the spectra, while a smaller gap is measured along the a/b axis. We show that these spectra are accurately described by the McMillan model where the small gap is induced through the coupling to the band associated with the large gap. In order to assign the small and large gaps to specific parts of the 2H-NbSe2 Fermi surface, the electronic structure was studied using first-principles calculations. While we cannot exclude the possibility of intrinsic anisotropy of the gaps, we propose that the large gap opens in the Fermi surface cylinders located around the corner K points while the sheets located around Γ are associated with the small gap. An additional component of the Fermi surface, a selenium based pocket, plays an essential role in the tunneling process. The role of the charge density wave occurring in this material is also discussed. Finally, we are able to give a coherent description of the observed characteristics of the tunneling spectra of 2H-NbSe2 as well as the differences with 2H-NbS2 where no charge density wave state is present. Further experimental work, such as high-resolution ARPES, would be very useful to confirm our interpretation. The approach and modeling developed here could also be relevant for other compounds of the dichalcogenide family.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Bioinspired catechol-terminated self-assembled monolayers with enhanced adhesion properties

  • Guardingo Melián, Mireia
  • Bellido Vera, Elena
  • Miralles, Rosa|||0000-0003-4757-9593
  • Faraudo, Jordi|||0000-0002-6315-4993
  • Sedó Vegara, Josep|||0000-0002-4195-7541
  • Tatay, Sergio|||0000-0003-0785-866X
  • Verdaguer Prats, Albert|||0000-0002-4855-821X
  • Busqué, Félix|||0000-0001-7566-4264
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
The role of the catechol moiety in the adhesive properties of mussel proteins and related synthetic materials has been extensively studied in the last years but still remains elusive. Here, a simplified model approach is presented based on a self-assembled monolayer (SAM) of upward-facing catechols thiol-bound to epitaxial gold substrates. The orientation of the catechol moieties is confirmed by spectroscopy, which also showed lack of significant amounts of interfering o-quinones. Local force-distance curves on the SAM measured by atomic force microscopy (AFM) shows an average adhesion force of 45 nN, stronger than that of a reference polydopamine coating, along with higher reproducibility and less statistical dispersion. This is attributed to the superior chemical and topographical homogeneity of the SAM coating. Catechol-terminated SAMs are also obtained on high-roughness gold substrates that show the ability to assemble magnetic nanoparticles, despite their lack of enhanced adhesion at the molecular level. Finally, the influence of the catechol group on the formation and quality of the SAM is explored both theoretically (molecular dynamics simulations) and experimentally using direct-write AFM lithography. Highly packed catechol monolayers with a large density and smaller roughness are studied by AFM force-distance curves. These experiments afford adhesion force values higher and much more monodisperse than those reported for polydopamine-like polymeric materials. These results are unique giving valuable information on the effect of molecular organization on the adhesive properties of interphases. Such information is crucial for the development of improved materials and interphases engineered at the molecular level, by chemical design.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Transport fingerprints at graphene superlattice Dirac points induced by a boron nitride substrate

  • Martínez Gordillo, Rafael
  • Roche, Stephan|||0000-0003-0323-4665
  • Ortmann, Frank|||0000-0002-5884-5749
  • Pruneda, Miguel|||0000-0002-3621-6095
We report peculiar transport fingerprints at the secondary Dirac points created by the interaction between graphene and boron nitride layers. By performing ab initio calculations, the electronic characteristics of the moiré patterns produced by the interaction between layers are first shown to be in good agreement with experimental data, and further used to calibrate the tight-binding model implemented for the transport study. By means of a real-space order-N quantum transport (Kubo) methodology, low-energy (Dirac point) transport properties are contrasted with those of high-energy (secondary) Dirac points, including both Anderson disorder and Gaussian impurities to respectively mimic short-range and long-range scattering potentials. Mean free paths at the secondary Dirac points are found to range from 10 nm to a few hundreds of nm depending on the static disorder, while the observation of satellite resistivity peaks depends on the strength of quantum interferences and localization effects.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Influence of the relative molecular orientation on interfacial charge-transfer Excitons at donor/acceptor Nanoscale heterojunctions

  • Aghamohammadi, Mahdieh
  • Fernández, Anton
  • Schmidt, Malte
  • Pérez Rodríguez, Ana|||0000-0002-5778-0103
  • Goñi, Alejandro|||0000-0002-1193-3063
  • Fraxedas, Jordi|||0000-0002-2821-4831
  • Sauthier, Guillaume|||0000-0003-3566-3878
  • Paradinas, Markos|||0000-0003-1006-9506
  • Ocal García, Carmen|||0000-0001-8790-8844
  • Barrena, Esther|||0000-0001-9163-2959
We address the impact of the relative orientation between donor (D) and acceptor (A) molecules at the D/A heterojunction on the exciton dissociation. For this purpose, two-dimensional heterojunctions of diindenoperylene (DIP) and N,N'-dioctyl-3,4,9,10-perylene tetracarboxylicdiimide (PTCDI-C) deposited onto SiO/Si are grown, which exemplify two model interfaces with the π-staking direction either perpendicular or parallel to the interface. Aspects related to the morphology of the heterojunctions and charge photogeneration are studied by scanning probe force methods and photoluminescence (PL) spectroscopy. Results from PL spectroscopy indicate that the exciton dissociation is influenced by the different relative molecular orientations of A and D. For the configuration with stronger orbital overlap between A and D at the interface, the exciton dissociation is dominated by recombination from an interfacial charge-transfer state. © 2014 American Chemical Society.