Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 60
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Towards Upscaling of La5.5WO11.25-delta Manufacture for Plasma Spraying-Thin Film Coated Hydrogen Permeable Membranes

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Solis Díaz, Cecilia
  • Comite, Antonio
  • Azzurri, Fiorenza
  • Gindrat, Marco
  • Moser, Stefan
  • Rauch, Johannes
  • Szyndelman, Gregory
  • Damani, Rajiv
[EN] Lanthanum tungstate (La6WO12) is a promising material for the development of hydrogen separation membranes, proton ceramic electrolyzer cells and protonic ceramic fuel cells due to its interesting transport properties and stability under different operation conditions. In order to improve the hydrogen transport through the La6WO12 membranes, thin membranes should be manufactured. This work is based on the industrial production of La5.5WO11.25-delta (LWO) powder by spray drying and the manufacturing of thin membranes by low-pressure plasma spraying (LPPS-TF) technique. LPPS-TF allows the production of dense thin films of high quality in an industrial scale. The powders produced by spray drying were morphological and electrochemically characterized. Hydrogen permeation fluxes of a membrane manufactured with these powders were evaluated and fluxes are similar to those reported previously for LWO powder produced in the lab scale. Finally, the transport properties of LWO thin films deposited on Al2O3 indicate that LPPS-TF produces high-quality LWO films with potential for integration in different applications., This work was financially supported by the European Union (DEMOYS Project, FP7/2007-2013-Grant Agreement 241309) and the Spanish Government (RTI2018-102161, SEV-2016-0683 and IJCI-2016-28330 grants).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The nature of active Ni sites and the role of Al species in the oligomerization of ethylene on mesoporous Ni-Al-MCM-41 catalysts

  • Moussa, Sara
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • Arribas Viana, Maria De Los Desamparados|||0000-0002-5761-288X
  • MARTINEZ FELIU, AGUSTIN|||0000-0002-9974-1567
[EN] Although nickel dispersed in mesoporous aluminosilicates are efficient catalysts for the oligomerization of ethylene, the nature of the active nickel sites still remains controversial. Here we applied in situ FTIR-CO spectroscopy during reaction with ethylene combined with reaction kinetics with online MS analysis of reaction products to unravel the nature of the active nickel species in working mesoporous Ni-Al-MCM-41 catalysts. The results revealed that isolated ion-exchanged Ni2+ cations are irreversibly blocked during the initial reaction stages leaving unsaturated Ni2+ cations grafted on silanols and at the surface of small (confined) NiO nanoparticles as the active species in the pseudo-steady state. The low activity of these species in pure silica materials suggested a promotional role of aluminum in the Al-MCM-41 matrix on enhancing the activity of Ni2+ sites, probably through a close interaction between Al species and nearby Ni2+ sites, as inferred from quantitative Al-27 MAS NMR and FTIR spectroscopies, This work has been financially supported by the Spanish government through the Severo Ochoa Program (SEV2016-0683) and RTI2018-102161 projects. The authors acknowledge the Microscopy Service of the Universitat Politecnica de Valencia for its assistance in the characterization of materials by electron microscopy.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Robust catalytically-activated LSM-BCZY-based composite steam electrodes for proton ceramic electrolysis cells

  • Bausá, Nuria
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Backbone electrodes based on an electronic conductor and a protonic conductor show advantages for proton ceramic electrolyzer cells (PCECs). This work, aims to shed further light on the nature of the rate determining steps in the anode operation and improve the reaction rate in high steam pressure electrolysis mode by (i) adjusting their catalytic activity through electrode infiltration with catalytic electronic-conducting nanoparticles; and (ii) electrochemical activation of surface species by applying a net current through the electrode. A composite formed by La0.8Sr0.2MnO3-delta (LSM) and BaCe0.2Zr0.7Y0.1O3-delta (BCZY27) was deposited on proton-conducting BCZY27 electrolytes and studied in symmetrical cells to investigate the anode microstructure and electrochemical performance. Electrochemical impedance spectroscopy (EIS) measurements were performed in the 800-500 degrees C range under 3 bar of pressure of wet air (75% of steam). LSM/BCZY27 50/50 vol% showed the best performance with an electrode polarization resistance (R-p) of 6.04 omega cm(2) at 700 degrees C and high steam pressure (0.75 bar of air and 2.25 bar of steam) whereas LSM/BCZY27 60/40 vol% presented a R-p of 18.9 omega cm(2). The backbone electrodes were infiltrated using aqueous solutions of metal precursors to boost the electrocatalytic activity towards water splitting and oxygen evolution. The infiltrated cells were fired at 850 degrees C for 2 h to obtain the desired crystalline nanoparticles (Pr6O11, CeO2, ZrO2 and Pr6O11-CeO2) and electrochemically tested under high steam pressures and bias currents to investigate the influence of catalytic activation on surface exchange kinetics. Among the tested catalysts, the lowest electrode polarization resistances (<0.2 omega cm(2)) were reached for the Pr6O11, CeO2 and Pr6O11-CeO2 catalysts at 700 degrees C by applying current densities ranging from 1.57 to 14.15 mA cm(-2), and the Pr6O11-CeO2-activated LSM/BCZY27 electrode exhibited the best performance. Finally, the effect of pO(2) and pH(2)O was investigated aiming to characterize the rate limiting processes in the electrodes., Financial support by the Spanish Government (Grants SEV-2016-0683, RTI2018-102161 and ENE2014-57651), Generalitat Valenciana (PROMETEO/2018/006) and by the EU through FP7 Electra Project (Grant Agreement 621244) is gratefully acknowledged. The support of the microscopy service at Universitat Politecnica de Valencia (UPV) for the SEM analysis is recognized.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Promotion of mixed protonic-electronic transport in La5.4WO11.1-d membranes under H2S atmospheres

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Toldrá-Reig, Fidel|||0000-0001-6133-7043
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Solis Díaz, Cecilia
  • Somacescu, S.
  • Gerhards, U.
  • Aguadero, A.
  • Haas-Santo, K.
  • Dittmeyer, R.
[EN] Catalytic membrane reactors (CMR) based on H-2-separation membranes can improve the performance of thermodynamically-limited reactions such as high-pressure steam methane reforming, ammonia cracking, non-oxidative aromatics production, and water gas shift reaction (WGS). In these industrial processes, the membrane surfaces are typically exposed to steam, CO2, CO, H2S, and hydrocarbons in combination with high temperatures. Therefore, the membrane materials require long-term thermo-chemical stability under the mentioned conditions. Stability in H2S is of outstanding importance since its presence, even at ppm level, gives rise to substantial surface poisoning and decomposition of most materials. Here we characterize the influence of H2S on the crystalline structure, lattice composition, and hydrogen-transport properties of La5.4WO11.1-& delta;, one of the reference protonic membrane materials. The incorporation of sulfide ions in the crystal lattice is ascertained from XRD, XPS, FESEM, WDS, EDS, and FIB-SIMS analyses. UV-vis spectroscopy and EIS measurements illustrate the effect of the incorporated sulfur in the transport properties, i.e., vigorously promoting the electronic conductivity mediated by the concurrent partial reduction of tungsten cations (W6+). The rise in electronic conductivity allowed an H-2 flux of 0.042 mL cm(-2) min(-1) to be reached at 700 & DEG;C for a & SIM;700 & mu;m-thick membrane, in contrast with negligible H-2 permeation in H2S-free conditions., This work was financially supported by the Spanish Government (RTI2018-102161, IJCI-2016-28330, IJCI-2017-34110, FPU13/03478 and CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) and by MCIN with funding from NextGenerationEU (PRTR-C17.I1) within the Planes Complementarios con CCAA (Area of Green Hydrogen and Energy) and it has been carried out in the CSIC Interdisciplinary Thematic Platform (PTI+) Transicion Energetica Sostenible+ (PTI-TRANSENER+).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Structural properties of mixed conductor Ba1-xGd1-yLax+yCo2O6-delta

  • Strandbakke, Ragnar
  • Wragg, David S.
  • Sørby, Magnus H.
  • Guzik, Matylda N.
  • Gunnæs, Anette
  • Szpunar, Iga
  • Wachowski, Sebastian Lech
  • Carvalho, Patricia A.
  • Mielewczyk-Gryn, Aleksandra
  • Norby, Trus
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Ba1¿xGd1¿yLax+yCo2O6¿¿ (BGLC) compositions with large compositional ranges of Ba, Gd, and La have been characterised with respect to phase compositions, structure, and thermal and chemical expansion. The results show a system with large compositional flexibility, enabling tuning of functional properties and thermal and chemical expansion. We show anisotropic chemical expansion and detailed refinements of emerging phases as La is substituted for Ba and Gd. The dominating phase is the double perovskite structure Pmmm, which is A-site ordered along the c-axes and with O vacancy ordering along the b-axis in the Ln-layer. Phases emerging when substituting La for Ba are orthorhombic Ba-deficient Pbnm and cubic LaCoO3-based R[3 with combining macron]c. When La is almost completely substituted for Gd, the material can be stabilised in Pmmm, or cubic Pm[3 with combining macron]m, depending on thermal and atmospheric history. We list thermal expansion coefficients for x = 0¿0.3, y = 0.2., The research has been supported by the National Science Centre Poland (2016/22/Z/ST5/00691), the Spanish Ministry of Science and Innovation (PCIN-2017-125, RTI2018-102161 and IJCI-2017-34110), and the Research Council of Norway (Grant no. 272797 "GoPHy MiCO") through the M-ERA.NET Joint Call 2016. The authors acknowledge the skilful assistance from the staff of the Swiss-Norwegian Beamline (SNBL) at the European Synchrotron Radiation Facility (ESRF), Grenoble, France. Dr. Cheng Li at POWGEN, SNS, Oak Ridge, US and Dr. Chiu C. Tang at beamline I11 at Diamond, Didcot, UK are gratefully acknowledged for PND and SR-PXD measurements, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Potentiometric C2H4-Selective Detection on Solid-State Sensors Activated with Bifunctional Catalytic Nanoparticles

  • Toldrá-Reig, Fidel|||0000-0001-6133-7043
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] This work presents a solid-state ionic-based device to selectively detect C2H4 in car exhaust gases. The sensor consists of 8YSZ as the electrolyte and two electrodes: Fe0.7Cr1.3O3/8YSZ and LSM/8YSZ. The main aim of this work is to optimize the catalytic behavior of the working electrode to C2H4 and reduce cross-sensitivity toward CO and H2O. Several catalyst nanoparticles were infiltrated to tailor C2H4 adsorption and electrochemical oxidation properties while diminishing adsorption and conversion of other gas components such as CO. The infiltrated metal catalysts were selected, taking into account both adsorption and redox properties. Infiltration of Ti or Al, followed by a second infiltration of Ni, enabled the selective detection of C2H4 with low cross-sensitivity toward CO and H2O in a moist gas environment. Further insight into potentiometric C2H4 sensing is achieved by electrochemical impedance analysis of the electrodes activated with bifunctional catalysts., FundingFunding from the Spanish Government (Grants FPU13/03478, AP-2003-03478, and RTI2018-102161) is kindly acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tuning Ternary Alloyed Nanoparticle Composition and Morphology by Exsolution in Double Perovskite Electrodes for CO2 Electrolysis

  • López-García, Andrés
  • Almar-Liante, Laura|||0000-0001-5103-3812
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Carrillo-Del Teso, Alfonso Juan
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Hungría, Ana B.
[EN] The intermittent nature of renewable energy resources makes imperative the development of efficient energy storage technologies. Solid oxide electrolysis cells (SOECs) are a promising alternative to energy conversion devices. SOECs can play an important role in the control of greenhouse gases by improving processes such as CO2 electrolysis. In order to enhance SOEC performance, exsolution of metal nanoparticles is emerging for the catalytic surface functionalization of electrodes, preventing sintering issues related to classical impregnation methods and enabling tailoring specific catalytic functions. In this work, a medium-entropy, double perovskite system SrxFeCo0.2Ni0.2Mn0.1Mo0.5O6-delta (x = 2.0, 1.9, and 1.8) was studied. We provide evidence of Fe-Co-Ni ternary alloyed exsolved nanoparticles, revealing that the alloy composition can be tuned by adjusting the reducing conditions. Exsolution temperature is critical for Fe content in nanoparticles, increasing as temperature increases, but Ni and Co are not significantly affected. Temperature adjustments allowed control over nanoparticle size and population, shrinking and growing, respectively, as temperature decreases. In contrast to what is usually described, A-site deficiency resulted in a decrease in nanoparticle exsolution because of NiO phase formation in x = 1.9 and 1.8, so that the x = 2.0 compound outperformed both non-stoichiometric materials, showing significantly larger populations. The three compounds exhibit important conductivity under both oxidizing and reducing atmospheres, which makes them promising electrodes. The Sr2FeCo0.2Ni0.2Mn0.1Mo0.5O6-delta material was integrated as a cathode in an asymmetrical electrolyte-supported cell, and its electrochemical performance under CO2 electrolysis conditions was studied. Our results showed a boost in electrocatalytic activity upon exsolution at 600 degrees C when compared to the fuel electrode without exsolved nanoparticles or exsolved at 800 degrees C, where the appearance of the secondary Ruddlesden-Popper phase was observed. Overall, here, we proved the possibility of obtaining ternary alloy exsolved nanoparticles and tuning their composition to enhance the performance of SOEC devices, paving the path for optimized metal-alloyed exsolved nanoparticle design, which might extend its applicability to other electrocatalytic processes in energy conversion and storage., The project that gave rise to these results received the support of a fellowship from Spanish Government (RTI2018-102161 grant) and "la Caixa" Foundation (ID 100010434 and grant LCF/BQ/PI20/11760015). Authors acknowledge the use of instrumentation and the technical advice provided by the National Facility ELECMI ICTS, node "Division de Microscopia Electronica"at Universidad de Cadiz. We thank the support of the Electronic Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hydrogen production via microwave-induced water splitting at low temperature

  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • García-Baños, Beatriz|||0000-0001-7862-3417
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Plaza González, Pedro José|||0000-0002-2623-0782
  • Santos-Blasco, Joaquín
  • Catalá Civera, José Manuel|||0000-0002-0617-1762
  • Borras-Morell, J. F.
  • Catalán-Martínez, David
  • Navarrete Algaba, Laura
[EN] Hydrogen is a promising vector in the decarbonization of energy systems, but more efficient and scalable synthesis is required to enable its widespread deployment. Towards that aim, Serra et al. present a microwave-based approach that allows contactless water electrolysis that can be integrated with hydrocarbon production. Supplying global energy demand with CO2-free technologies is becoming feasible thanks to the rising affordability of renewable resources. Hydrogen is a promising vector in the decarbonization of energy systems, but more efficient and scalable synthesis is required to enable its widespread deployment. Here we report contactless H-2 production via water electrolysis mediated by the microwave-triggered redox activation of solid-state ionic materials at low temperatures (<250 degrees C). Water was reduced via reaction with non-equilibrium gadolinium-doped CeO2 that was previously in situ electrochemically deoxygenated by the sole application of microwaves. The microwave-driven reduction was identified by an instantaneous electrical conductivity rise and O-2 release. This process was cyclable, whereas H-2 yield and energy efficiency were material- and power-dependent. Deoxygenation of low-energy molecules (H2O or CO2) led to the formation of energy carriers and enabled CH4 production when integrated with a Sabatier reactor. This method could be extended to other reactions such as intensified hydrocarbons synthesis or oxidation., This work was supported by the Spanish Government (RTI2018-102161, SEV-2016-0683 and Juan de la Cierva grant IJCI-2017-34110). We thank the support of the Electronic Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Progress in Ce(0.8)Gd(0.2)O(2-delta)protective layers for improving the CO(2)stability of Ba0.5Sr0.5Co0.8Fe0.2O3-delta O2-transport membranes

  • Solis Díaz, Cecilia
  • García-Fayos, Julio
  • Palafox, Elena
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Ce0.8Gd0.2O2-delta(CGO) thin films were deposited by radio frequency (RF) magnetron sputtering and deposition temperature was changed in order to optimize the microstructure and transport properties of the obtained films. Afterwards, the films were deposited on Ba0.5Sr0.5Co0.8Fe0.2O3-delta(BSCF) oxygen separation membranes as CO(2)protective layers. Oxygen permeation was finally measured by sweeping both Ar and CO2, and the obtained results were compared with the bare BSCF membrane. It was found that the oxygen permeation of the BSCF is improved by this CGO layer, with a 4-fold improvement in the oxygen permeation flux when using pure CO(2)as the sweep gas at 900 degrees C. Therefore, these CGO protective layers are a promising way for overcoming the limitations of BSCF membranes in CO2-containing environments, associated with surface competitive O-2-CO(2)adsorption and carbonation of Ba at low temperatures., Funding from the Spanish Government (RTI2018-102161, SEV-2016-0683 and IJCI-2017-34110 grants) and Generalitat Valenciana (PROMETEO/2018/006 grant) is kindly acknowledged. The support of the Servicio de Microscopia Electronica of the Universitat Politecnica de Valencia is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Chemical and mechanical stability of BCZY-GDC membranes for hydrogen separation

  • Mercadelli, Elisa
  • Gondolini, Angela
  • Ardit, Matteo
  • Cruciani, Giuseppe
  • Melandri, Cesare
  • Sanson, Alessandra
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] This work investigates, for the first time, the hydrogen permeation of BaCe0.65Zr0.20Y0.15O3-delta-Ce0.8Gd0.2O2-delta (BCZY-GDC) asymmetric membranes for 100 h, using wet 15% CO2 in Ar as sweep gas. In the same frame, ex-situ aging tests were performed for 100 h exposure at 750 ? in different atmospheres (H-2, CO2, H-2 + CO2), to evaluate the phase, microstructure, and mechanical long-term stability of this system. The thermal aging in H-2-atmosphere leads to lower flexural strength caused by a microstructure embrittlement of the BCZY-GDC asymmetric membrane, due to chemical expansion/contraction of the GDC cell after the aging cycle. Indeed, micro-cracking of GDC grains, that decreases the composite hardness, is observed in symmetric (pressed pellet) membranes. The aging in CO2 causes a slightly increase in flexural strength values due to the formation of sub-micrometric Zr-doped ceria-BaCO3 phases at the expense of the perovskite. Higher hardness values related to the emerging of BaCO3 islands on the symmetric membrane surface were also recorded. In H-2 + CO2 atmosphere (real testing condition), the membrane shows a slight decrease in flexural strength and hardness while no evident morphological or structural changes (except the BaCO3 formation in traces) were observed. This study highlights that promising and stable hydrogen permeation flux values can be recorded using the asymmetric configuration for 100 h, using wet 15% CO2 in Ar as sweep gas. Neither structural nor morphological modification of the membrane were detected after the testing., This work was financially supported by the agreement between the Italian Ministry of Economic Development and the Italian National Research Council "Ricerca di sistema elettrico nazionale'' and by the Spanish Government (RTI2018-102161) and the Generalitat Valenciana (PROMETEO/2018/006).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization of oxygen transport phenomena on BSCF membranes assisted by fluid dynamic simulations including surface exchange

  • Catalán-Martínez, David
  • García-Fayos, Julio
  • Santafé Moros, María Asunción|||0000-0002-0933-108X
  • Gozálvez-Zafrilla, José M.|||0000-0003-4419-6765
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The influence of fluid dynamic conditions on the oxygen transport through mixed ionic-electronic membranes was studied experimentally and numerically. A set of permeation experiments was performed in a wide range of operating conditions combining temperature, driving force and flow rate of air feed and sweep streams. A computational model was built and enabled to systematically evaluate the effect of the fluid dynamic conditions on O-2 separation process. This model includes the surface resistance (gas exchange kinetics) and bulk oxygen-ion diffusion. The experimental set was used to obtain the model parameters by following a two-step fitting procedure: a first fitting of a simplified one-dimensional model using genetic algorithms and a subsequent refining of the parameters using the complete model implemented in COMSOL Multiphysics. The high-accuracy model allowed characterizing the O-2 transport phenomena and understanding the different factors governing the overall process, e.g. by using different membrane thicknesses, sweep gases or vacuum. Simulations of the fitted model revealed the importance of the sweep effect in the O-2 transport across the membrane and enabled to establish rules for both design of permeation experiments and up-scaling., This work was financially supported by Spanish Government (Grants SEV-2016-0683 and RTI2018-102161) and Generalitat Valenciana (PROMETEO/2018/006).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Reversible electrodes based on B-site substituted Ba0.5Sr0.5Co0.8Fe0.2O3-delta for intermediate temperature solid-oxide cells

  • Navarrete Algaba, Laura
  • Hannahan, C.
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The Ba0.5Sr0.5Co0.8Fe0.2O3-delta perovskite is a promising electrode material for solid-oxide electrochemical cells exhibiting excellent oxygen reduction reaction (ORR) activity and mixed ionic-electronic transport properties at intermediate temperatures but suffers from stability issues. In this work, the effect on stability and electrochemical performance of several B-site substituted cations (Sc, Zr, Y) are studied. The presence of these substituted cations improved stability by preventing (a) the formation of the detrimental hexagonal phase during long term air exposure experiments and (b) reducing the formation of carbonates in CO2-containing atmospheres. Symmetrical cell testing revealed that the Sc-substituted material mixed with an ionic gadolinium-doped ceria (GDC) phase has the lowest polarization resistance among the materials and thus was chosen as the cathode for the full cell construction. The composite electrode achieved encouraging power density values ~877 mW/cm2 at 700 degrees C. The material showed stable hydrogen generation during intermediate temperature electrolysis tests and its performance improved upon the introduction of CO2 to carry out co-electrolysis. Furthermore, methane was obtained during co-electrolysis and Sabatier reaction at temperatures below 450 degrees C. The superior stability and performance of the Sc-substituted Ba0.5Sr0.5Co0.8Fe0.2O3-delta make it an exciting candidate for application as a cathode in reduced temperature electrochemical cells., Acknowledgements This work was financially supported by the Spanish Government (RTI2018-102161 grant) and Generalitat Valenciana (PROMETEO/2018/006 grant) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Electric and magnetic properties of Lanthanum Barium Cobaltite

  • Szpunar, I.
  • Wachowski, S.
  • Miruszewski, T.
  • Dzierzgowski, K.
  • Gornicka, K.
  • Klimczuk, T.
  • Sorby, M.
  • Strandbakke, Ragnar
  • Gazda, Maria
  • Mielewczyk-Gryn, Aleksandra
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The cubic Ba0.5La0.5CoO3-delta was synthesized using solid state reaction. The structural properties were determined by the simultaneous refinement of Synchrotron Powder X-ray Diffraction and Neutron Powder Diffraction data. Iodometric titration was used to examine the oxygen stoichiometry and average cobalt oxidation state. Low-temperature magnetic studies show soft ferromagnetic character of fully oxidized material, with theta(P) = 198(3) K and mu(eff) = 2.11(2) mu(B). Electric measurements show the thermally activated nature of conductivity at low temperatures, whereas, due to the variable oxidation and spin state of cobalt, a single charge transport mechanism cannot be distinguished. Around room temperature, a wide transition from thermally activated conductivity to semi-metallic behavior is observed. Under the inert atmosphere, the oxygen content lowers and the cation ordering takes place, leading to coexistence of two, ordered and disordered, phases. As a result of this change, thermally activated conductivity is observed also at high temperatures in inert atmosphere., The authors acknowledge the skillful assistance from the staff of the Swiss-Norwegian Beamline (SNBL), at the European Synchrotron Radiation Facility (ESRF), Grenoble, France. The research has been supported by the National Science Centre Poland under m.ERA.net funding scheme (2016/22/Z/ST5/00691). Funding from the Spanish Government (PCIN-2017-125, RTI2018-102161) is kindly acknowledged. Financial and scientific contributions from the Research Council of Norway (Grant no 272797 "GoPHy MiCO") through the M-ERA.NET Joint Call 2016.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

CuZnAl hydrotalcites as suitable precursors for chromium-free ester hydrogenolysis catalysts

  • Aubrecht, Jaroslav
  • Pospelova, Violetta
  • Kikhtyanin, Oleg
  • Straka, Petr
  • Kubicka, David
  • MARTINEZ FELIU, AGUSTIN|||0000-0002-9974-1567
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
[EN] Ester hydrogenolysis is industrially performed over Adkins catalysts. Their use is being restricted as they contain environmentally unfriendly Cr2O3. As a potential replacement, five co-precipitated CuZnAl catalysts with various Cu/Zn and Al/(Cu+Zn) atomic ratios were studied. The structure transformation during the whole catalyst lifecycle was determined. The catalyst precursors consisted of CuZnAl-hydrotalcite (HTC). Although the Cu/Zn ratio did not affect the HTC structure, an increase in Al content resulted in smaller Cu nanoparticles with a larger surface area. In the reduced catalysts, both Cu+ and Cu0 species were identified using FTIR-CO. XPS revealed catalyst surface reconstruction after catalyst reduction and catalytic reaction. The evaluation of the catalysts in dimethyl adipate hydrogenolysis indicated that the catalyst having the lowest Cu loading possessed the highest activity, due to its high SCu and Cu/Zn = 1. Generally, higher activity was achieved by reducing the Cu/Zn and increasing the Al/(Cu+Zn) ratios., Financial support from Czech Science Foundation (project No. GA17-05704S and GA20-28093S) is greatly acknowledged. The cata- lyst precursors were prepared with support of CATPRO infrastructure. Experimental results were accomplished by using Large Research Infrastructure ENREGAT supported by the Ministry of Education, Youth and Sports of the Czech Republic under project no. LM2018098. P.C. and A.M. acknowledge financial support from the Spanish Government through the RTI2018-099668-B-C21 and RTI2018-102161 projects. The authors are grateful to the Microscopy Service of the Universitat Polite ` cnica de Vale ` ncia (UPV) for assistance in microscopy characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

High-Temperature Structural and Electrical Properties of BaLnCo(2)O(6) Positrodes

  • Szpunar, Iga
  • Strandbakke, Ragnar
  • Sørby, Magnus Helgerud
  • Wachowski, Sebastian Lech
  • Tarach, Mateusz
  • Witkowska, Agnieszka
  • Dzik, Ewa
  • Norby, Truls
  • Gazda, Maria
  • Mielewczyk-Gryn, Aleksandra
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The application of double perovskite cobaltites BaLnCo(2)O(6-delta) (Ln = lanthanide element) in electrochemical devices for energy conversion requires control of their properties at operating conditions. This work presents a study of a series of BaLnCo(2)O(6-delta) (Ln = La, Pr, Nd) with a focus on the evolution of structural and electrical properties with temperature. Symmetry, oxygen non-stoichiometry, and cobalt valence state have been examined by means of Synchrotron Radiation Powder X-ray Diffraction (SR-PXD), thermogravimetry (TG), and X-ray Absorption Spectroscopy (XAS). The results indicate that all three compositions maintain mainly orthorhombic structure from RT to 1000 degrees C. Chemical expansion from Co reduction and formation of oxygen vacancies is observed and characterized above 350 degrees C. Following XAS experiments, the high spin of Co was ascertained in the whole range of temperatures for BLC, BPC, and BNC., The research has been supported by the National Science Centre Poland (2016/22/Z/ST5/00691), the Spanish Ministry of Science and Innovation (PCIN-2017-125, RTI2018-102161 and IJCI-2017-34110), and the Research Council of Norway (Grant no 272797 "GoPHy MiCO") through the M-ERA.NET Joint Call 2016. We acknowledge the CERIC-ERIC Consortium for the access to MCX beamline at Elettra Sinchrotrone Trieste (proposal no 20187079). We also acknowledge Solaris National Radiation Centre Poland for access to the XAS/PEEM beamline (proposal no 181MS001).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Copper surface-alloying of H-2-permeable Pd-based membrane for integration in Fischer-Tropsch synthesis reactors

  • Escorihuela-Roca, Sara
  • Toldrá-Reig, Fidel|||0000-0001-6133-7043
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Murciano Martínez, Raúl
  • MARTINEZ FELIU, AGUSTIN|||0000-0002-9974-1567
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Self-supported palladium tubular membranes are surface-functionalized and tested for the selective and controlled addition of H-2 along a fixed-bed catalytic reactor for Fischer-Tropsch hydrocarbon synthesis (FTS). In order to avoid CO poisoning of the active sites of the metallic membrane at low working temperatures (similar to 250 degrees C), a Cu-based protective layer is deposited on the outer surface of a tubular membrane by RF sputtering at room temperature. Upon thermal treatment in H-2, the Cu layer alloys with Pd on the membrane surface, as confirmed by means of XRD, FESEM and TEM, while the membrane assembly is fully functional, i.e. the negative effect of CO surface adsorption is highly diminished and the membrane provides an appropriate H-2 flux (e.g. 12 ml/min.cm(2)) under the harsh operation conditions practiced in FT synthesis. When the Cu-functionalized membrane is fully integrated in the FTS reactor (250 degrees C, 20 bar, 30% CO in feed), the membrane delivers a stable H-2 permeation flux and enables to increase the yield of hydrocarbons in the range of gasoline (C-5-C-12) while reducing methane formation over a bifunctional CoRu/Al2O3-zeolite catalyst., This work was financially supported by the Spanish Government (SEV-2016-0683, SVP-2014-068356, FPU13/03478, RTI2018-102161 and IJCI-2016-28330 grants) and Generalitat Valenciana (PROMETEO/2018/006 grant).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Thermo-fluid dynamics modelling of steam electrolysis in fully-assembled tubular high-temperature proton-conducting cells

  • Catalán-Martínez, David
  • Navarrete Algaba, Laura
  • Tarach, Mateusz
  • Vøllestad, E.
  • Norby, T.
  • Budd, M.I.
  • Veenstra, P.
  • Santos-Blasco, Joaquín
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Electrolysis based on renewable energies offers a promising carbon-free solution for hydrogen generation and storage. The recent developments of proton ceramic electrolysis cells operating at intermediate temperatures bear promise of superior energy efficiency compared to oxide ion conducting electrolytes. Here, a proton ceramic Single Engineering Unit (SEU) design is optimized for steam electrolysis using a computational fluid dynamics (CFD) model implemented in a COMSOL Multiphysics software. The SEU is an all-in-one tubular cell arrangement that constitutes the smallest electrolysis unit and enables efficient, adaptable pressurized hydrogen generation. The parametrical modelling study is conducted for two adiabatic operation scenarios with distinct steam conversion rates and tested for multiple key parameters, namely internal and external chamber pressures and inlet stream temperature. The modelling results show that low steam conversions enable operation at higher current densities and that the thermoneutral voltage for a fixed steam conversion is highly sensitive to the process conditions and operation modes. The increment of the pressure of the generated hydrogen implies a reduced production rate at thermoneutral voltage, although it can be compensated with an enhanced steam pressure or a reduced inlet temperature. Additionally, the introduction of a porous medium as the SEU current collector in the steam chamber enhances heat transport within this chamber. The area specific resistance of the system determines the current density, enforcing an adaption of the area of the electrolyser to satisfy the target hydrogen production and energy efficiency. The resulting proposed SEU design and adapted operational parameters allow effective delivery of pressurized dry hydrogen for a wide range of conditions and applications, The work leading to these results has received funding from Spanish Government (RTI2018-102161 grant) and from Fuel Cells and Hydrogen 2 Joint Undertaking under grant agreement 779486 (`GAMER'). This Joint Undertaking receives support from the European Union's Horizon 2020 research and innovation programme, Hydrogen Europe and Hydrogen Europe research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

In Situ Raman Characterization of SOFC Materials in Operational Conditions: A Doped Ceria Study

  • Solís, Cecilia
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The particular operational conditions of electrochemical cells make the simultaneous characterization of both structural and transport properties challenging. The rapidity and flexibility of the acquisition of Raman spectra places this technique as a good candidate to measure operating properties and changes. Raman spectroscopy has been applied to well-known lanthanide ceria materials and the structural dependence on the dopant has been extracted. The evolution of Pr-doped ceria with temperature has been recorded by means of a commercial cell showing a clear increment in oxygen vacancies concentration. To elucidate the changes undergone by the electrolyte or membrane material in cell operation, the detailed construction of a homemade Raman cell is reported. The cell can be electrified, sealed and different gases can be fed into the cell chambers, so that the material behavior in the reaction surface and species evolved can be tracked. The results show that the Raman technique is a feasible and rather simple experimental option for operating characterization of solid-state electrochemical cell materials, although the treatment of the extracted data is not straightforward., This research was funded by the Spanish Government (IJCI-2017-34110, RTI2018-102161 and SEV-2016-0683 grants).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Sustainable Production of Hydrogen by Steam Reforming of Ethanol Using Cobalt Supported on Nanoporous Zeolitic Material

  • Da Costa Serra, Javier Francisco|||0000-0001-7637-8972
  • Rey Garcia, Fernando|||0000-0003-3227-5669
  • Chica, Antonio
  • Navarro, Maria Teresa
[EN] Cobalt catalysts supported on Y zeolite and mesoporized Y zeolite (Y-mod) have been studied in steam reforming of ethanol (SRE). Specifically, the effect of the mesoporosity and the acidity of the y zeolite as a support has been explored. Mesoporous were generated on Y zeolite by treatment with NH4F and the acidity was neutralized by Na incorporation. Four cobalt catalysts supported on Y zeolite have been prepared, two using Y zeolite without mesoporous (Co/Y, Co/Y-Na), and two using Y zeolite with mesoporous (Co/Y-mod and Co/Y-mod-Na). All catalysts showed a high activity, with ethanol conversion values close to 100%. The main differences were found in the distribution of the reaction products. Co/Y and Co/Y-mod catalysts showed high selectivity to ethylene and low hydrogen production, which was explained by their high acidity. On the contrary, neutralization of the acid sites could explain the higher hydrogen selectivity and the lower ethylene yields exhibited by the Co/Y-Na and Co/Y-mod-Na. In addition, the physicochemical characterization of these catalysts by XRD, BET surface area, temperature-programmed reduction (TPR), and TEM allowed to connect the presence of mesoporous with the formation of metallic cobalt particles with small size, high dispersion, and with high interaction with the zeolitic support, explaining the high reforming activity exhibited by the co/y-mod-Na sample as well as its higher hydrogen selectivity. It has been also observed that the formation of coke is affected by the presence of mesoporous and acidity. Both properties seem to have an opposite effect on the reforming catalyst, decreasing and increasing the coke deposition, respectively., This research was funded by Generalitat Valenciana, grant number PROMETEO/2018/006", Spanish Government (Project RTI2018-102161-I00) and RED DE EXCELENCIA EN BIORREFINERIAS SOSTENIBLES (RED2018-102623-T).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparative Study of Epoxy-CsH2PO4 Composite Electrolytes and Porous Metal Based Electrocatalysts for Solid Acid Electrochemical Cells

  • Navarrete Algaba, Laura
  • Yoo, Chung-Yul
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Electrochemical cells based on acid salts (CsH2PO4) have attracted great interest for intermediate temperature, due to the outstanding proton conductivity of acid salts. In this work, electrodes and electrolyte were optimized following different strategies. An epoxy resin was added to the CsH2PO4 material to enhance the mechanical properties of the electrolyte, achieving good conductivity, enhanced stability, and cyclability. The electrodes configuration was modified, and Ni sponge was selected as active support. The infiltration of different oxide nanoparticles was carried out to tailor the electrodes resistance by promoting the electrocatalyst activity of electrodes. The selection of a cell supported on the electrode and the addition of an epoxy resin enables the reduction of the electrolyte thickness without damaging the mechanical stability of the thinner electrolyte., Funding from Spanish Government (MINECO ENE2014-57651 grant) is kindly acknowledged. We greatly appreciated using the Convergence Research Laboratory (established by the MNU Innovation Support Project in 2020) to conduct this research. This work was financially supported by the Spanish Government (Grants SEV-2016-0683 and RTI2018-102161) and the Generalitat Valenciana (PROMETEO/2018/006). The authors want also to acknowledge the Electron Microscopy Service from the Universitat Politècnica de València for their support in the SEM analysis performed in this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Energetics of formation and stability in high pressure steam of barium lanthanide cobaltite double perovskites

  • Mielewczyk-Gryn, Aleksandra
  • Yang, Shuhao
  • Strandbakke, Ragnar
  • Sorby, Magnus H.
  • Szpunar, Iga
  • Witkowska, Agnieszka
  • Wachowski, Sebastian
  • Navrotsky, Alexandra
  • Gazda, Maria
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] This study concerns energetics of formation and the stability in high water partial pressure of BaLnCo(2)O(6-delta), (Ln = La, Pr, Nd, and Gd) (BLnC) and BaGd1-xLaxCo2O6-delta, where x = 0.2, 0.5, and 0.7 (BGLC) double perovskite cobaltites. Those materials are extensively studied due to their potential applications as a positrode in electrochemical devices. Therefore, their stability under such conditions is a key issue. All investigated materials are thermodynamically stable relative to binary oxides and exhibit strongly exothermic enthalpies of formation. Moreover, BaGd0.3La0.7Co2O6-delta and BaGd0.8La0.2Co2O6-delta remain the main perovskite structure up to 3 bars of water vapor at 400 degrees C. At higher steam pressure, reaching 10 bar at 300 degrees C, the partial decomposition to constituent oxides and hydroxides was observed. The BGLC compounds exhibit higher negative formation enthalpies in comparison to single-Ln compositions, which does not translate into higher chemical stability under high steam pressures since the BLnC series retained the main perovskite structure at higher temperatures as well as in higher water vapor pressures., The research has been supported by the National Science Centre Poland (2016/22/Z/ST5/00691), the Spanish Ministry of Science and Innovation (PCIN-2017-125, RTI2018-102161, and IJCI-2017-34110), and the Research Council of Norway (grant no. 272797 "GoPHy MiCO") through the M-ERA.NET Joint Call 2016. We also acknowledge Solaris National Radiation Centre Poland for access to the PIRX (XAS/PEEM) beamline time (proposal no 201036). Dr Chiu C. Tang at beamline I11 at Diamond Light Source, Didcot, UK is gratefully acknowledged SR-PXD measurements. The calorimetry at Arizona State University received financial support from the U.S. Department of Energy, Office of Basic Energy Sciences, grant DE-SC0021987.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Exploring the Stability of Fe-Ni Alloy Nanoparticles Exsolved from Double-Layered Perovskites for Dry Reforming of Methane

  • Carrillo-Del Teso, Alfonso Juan
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Exsolution is emerging as a promising route for the creation of nanoparticles that remain anchored to the oxide support, imparting remarkable stability in high temperature chemical processes such as dry reforming of methane. This process takes place at temperatures around 850 degrees C, which causes sintering-related issues in catalysts prepared using conventional impregnation methods, which could be overcome by using exsolution functionalized oxides. In this work, FeNi3 alloy nanoparticles exsolved from Sr2FexNi1-xMoO6-(delta) double-layered perovskites were evaluated as a dry reforming catalyst, paying special attention to structure-activity relationships. Our results indicate that increasing the Ni content favors the nanoparticle dispersion, eventually leading to increased CO2 and CH4 conversions. The exsolved nanoparticles presented remarkable nanoparticle size (ca. 30 nm) stability after the 10 h treatment, although the formation of some phase segregations over the course of the reaction caused a minor decrease in the nanoparticle population. Overall, the results presented here serve as materials processing guidelines that could find further potential use in the design of more efficient (electro)catalysts in other fuel production or energy conversion technologies., The project that gave rise to these results received the support of a fellowship from la Caixa Foundation (ID 100010434). The fellowship code is LCF/BQ/PI20/11760015. Additional funding from the Spanish Government (Grant RTI2018-102161) is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Intensification of catalytic CO2 methanation mediated by in-situ water removal through a high-temperature polymeric thin-film composite membrane

  • Escorihuela-Roca, Sara
  • Cerdá-Moreno, Cristina
  • Weigelt, Fynn
  • Tena, Alberto
  • Shishatskiy, Sergey
  • Brinkmann, Torsten
  • Remiro-Buenamañana, Sonia|||0000-0002-5393-5729
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Chica, Antonio
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Catalytic CO2 methanation technology can be improved by process intensification, i.e. enabling higher energy efficiency and process sustainability. Here, thin-film composite membranes (TFCM) were developed for in-situ water removal in a catalytic membrane reactor (CMR) for the Sabatier process. The selective separation layer (1.4 mu m-thick) of the composite membrane is made of the polyimide 6FDA-6FpDA, a glassy polyimide, which exhibits high permeability and selectivity together with stable function at unprecedented high temperatures (>200 degrees C), compared to polyimides reported until now (90 degrees C), thus matching the temperature range of Sabatier reactors. Remarkably, TFCM developed in this work, allow to extract an outstanding amount of water up to 1 m(3)/(m(2).h.bar) at 260 degrees C. TFCM was implemented for the water removal from the methanation reaction in a CMR operated at 260 degrees C and using Ni-Todomkite as catalyst. The TFCM-mediated water-extraction enabled to raise both catalytic stability and activity during CMR operation. CO2 conversion stability was greatly improved exhibiting a conversion value of 72 % during the course of the reaction (21 % increase in CO2 conversion), with a water removal of 12.5 % and specific flux of similar to 100 g.h(-1) m(-)(2)., This work was financially supported by the Spanish Government (SVP-2014-068356, SVP-2014-068713, RTI2018-102161 and IJCI-2016-28330 grants) and Generalitat Valenciana (PROMETEO/2018/006 grant) . The authors want also to acknowledge the Electron Microscopy Service from the Universitat Politecnica de Valencia for their support in the SEM and TEM analysis performed in this work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Redox-stable composite electrodes for CH4 conversion reactors based on proton ceramic electrochemical cells

  • Almar-Liante, Laura|||0000-0001-5103-3812
  • Fabuel Robledo, Maria
  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Bausá, N.
[EN] Electrochemical reactors based on proton-conducting ceramic electrolytes show a great potential in the conversion of hydrocarbons by enabling the intensification via the in-situ extraction of the H-2 produced. However, non-oxidative operation conditions lead to the progressive coke formation on the catalyst and electrodes and thus, an oxidative regeneration cycle is required to restore the catalyst activity. Consequently, newly redox-stable electrodes are required to enable operation under both non-oxidative H-2-extraction and coke-oxidation conditions. Here, four composite materials were investigated as redox-stable electrode backbones for their integration in proton-conducting cells, composed by the proton conductor BaCe0.2Zr0.7Y0.1O3-delta (BCZY27) and La0.85Sr0.15FeO3 (LSF8515), La0.5Sr0.5FeO3 (LSF55), La0.84Sr0.16Cr0.5Mn0.5O3 (LSCM) or La0.8Sr0.2MnO3 (LSM). Chemical compatibility with the electrolyte and electrochemical performance were characterized in the range 500-800 ?C. LSCM/BCZY27 and LSM/BCZY27 showed the best performance. The electrode activity was boosted by catalytically activating with Pt and CeO2 nanoparticles while exhibiting outstanding stability upon redox cycling. LSM/BCZY27+Pt/CeO2 showed the lowest polarization resistance, i.e., achieving 0.7 omega cm(2 )at 700 ?C in 10% CH4 and 9% H-2 and 0.14 omega cm(2) in air, revealing a high potential as redox-stable electrode for non-oxidative hydrocarbon conversion in electrochemical reactors., Part of the present research was developed in the frame of N. Bausa's PhD thesis (Chapter 9) that has received funding from Spanish Government (RTI2018-102161 grant). This work has been also supported by the WINNER project. This project has received funding from the Fuel Cells and Hydrogen 2 Joint Undertaking (now Clean Hydrogen Partnership) under Grant Agreement No 101007165. This Joint Undertaking receives support from the European Union's Horizon 2020 Research and Innovation program, Hydrogen Europe and Hydrogen Europe Research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Impact of lattice properties on the CO2 splitting kinetics of lanthanide-doped cerium oxides for chemical looping syngas production

  • Laqdiem-Marin, Marwan
  • Dimitrakopoulos, Georgios
  • García-Fayos, Julio
  • Ghoniem, Ahmed F.
  • Carrillo-Del Teso, Alfonso Juan
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] Cerium oxide (CeO2) is the state-of-the-art material for syngas production from CO2 and H2O splitting via (methane assisted-) solar-driven thermochemical cycles. This technology consists of two separate processes: (1) a partial reduction of the oxide with methane at -900 degrees C that produces syngas and generates oxygen vacancies in the oxide lattice; and (2) oxidation of the reduced oxide by reaction with H2O and/or CO2 to form H2 and/or CO, respectively, which incorporates oxygen into the oxygen vacancy lattice sites. Doping the cerium oxide with other cations enables to increase the oxygen-vacancy concentration or to induce changes in the crystal lattice, aiming at increasing the fuel yield and/or boosting the redox oxygen-exchange kinetics. Traditionally, CeO2 has been doped with lanthanides to improve the redox behavior and enhance ionic conduction. For lanthanide-doped cerium oxides, a correlation between the dopant's ionic radius and the material's ionic conductivity has been established. Here, we examine the impact of the trivalent lanthanide dopants on the methane partial oxidation and CO2 splitting. Our results reveal a correlation between the dopant ionic radius, ionic conductivity, oxygen exchange kinetics, and CO2 splitting kinetics. We could identify the optimum ionic radius for enhanced CO2 splitting kinetics based on our observations. These findings are an essential framework for designing more advanced redox materials for chemical looping syngas production., Financial support by the Spanish Ministry of Science and Innovation (RTI2018-102161 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033), and MIT International Science and Technology Initiatives (MISTI) Seed Funds, in particular MISTI-Spain Inditex, is gratefully acknowledged. The authors would like to thank Dr. J. L. Jorda for the help with XRD and M. Tadeo and. A. Ferrero for the assistance with BET measurements. Also, we acknowledge the support of the Servicio de Microscopa Elcectronica of the UPV. Especially, we are thankful to M. Fabuel for the help with the materials elaboration.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Structure and water uptake in BaLnCo(2)O(6-delta) (Ln =La, Pr, Nd, Sm, Gd, Tb and Dy)

  • Wachowski, Sebastian Lech
  • Szpunar, Iga
  • Sørby, Magnus Helgerud
  • Mielewczyk-Gryn, Aleksandra
  • Ghica, Corneliu
  • Cosmin Istrate, Marian
  • Gazda, Maria
  • Gunnæs, Anette E.
  • Norby,Truls
  • Strandbakke, Ragnar
  • Balaguer Ramirez, Maria|||0000-0002-7098-9235
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The structure of BaLnCo(2)O(6-delta) (Ln =La, Pr, Nd, Sm, Gd, Tb and Dy) was studied by the means of synchrotron radiation powder X-ray diffraction, neutron powder diffraction and Transmission Electron Microscopy (TEM), while water uptake properties were analysed with the use of thermogravimetry (TG) and water adsorption isotherms. The structure refinement revealed that the dominant phase in all compositions was orthorhombic with an ordering of the A-site cations along the c-axis and ordering of oxygen vacancies along the b-axis, which was also directly evidenced by TEM. It was shown that both unit cell volume and average Co-oxidation state at room temperature decrease linearly with decreasing Ln radius. TG water uptake experiments in humidified N-2-O-2 gas mixture at 300 degrees C revealed that among all compositions, only BaLaCo2O6-delta and BaGdCo2O6-delta exhibit significant water uptake. Surface water adsorption studies showed that the alpha, a normalised parameter reflecting the surface hydrophilicity, mostly independently of Ln radius was close to 0.5, which means that the surface is neither hydrophobic nor hydrophilic. The results indicated that water uptake observed at 300 degrees C is a bulk process, which cannot be described by standard hydration/hydrogenation reaction and it is related to the layered structure of the perovskite lattice and characteristic to La or Gd being present in the lattice., The research has been supported by the National Science Centre Poland (2016/22/Z/ST5/00691), the Spanish Government (PCIN2017-125), and the Research Council of Norway (Grant n. 272797 "GoPHy MiCO") through the M-ERA.NET Joint Call 2016. Funding from the Spanish Government (RTI2018-102161 and IJCI-2017-34110 grant) is kindly acknowledged. The authors acknowledge the skilful assistance from the staffof the Swiss-Norwegian Beamline (SNBL), at the European Synchrotron Radiation Facility (ESRF), Grenoble, France. Dr Cheng Li is at POWGEN, SNS, Oak Ridge, US and Dr Chiu C. Tang at beamline I11 at Diamond, Didcot, UK are gratefully acknowledged for PND and SR-PXD measurements, respectively, of BaGdCo 2 O 6-d. SLW and AMG acknowledge the CERIC-ERIC Consortium for the access to experimental facilities and the financial support (No 20187079). CG and MCI acknowledge the financial support from Romanian Ministry of Research and Innovation in the frame of the Core Program PN19-03. SLW would like to express gratitude to Malgorzata Nadolska from Gdansk University of Technology for support in surface measurements and analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Tailoring La(2-x)A(x)Ni(1-y)ByO(4+delta) cathode performance by simultaneous A and B doping for IT-SOFC

  • Navarrete Algaba, Laura
  • Yoo, C.-Y.
  • Fabuel Robledo, Maria
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] The present work focuses on the study of different Ruddlesden-Popper based cathode materials for Solid Oxide Fuel Cells at Intermediate Temperature (IT-SOFC). The partial substitution of La and Ni by Pr and Co, respectively, were studied in the La(2-x)A(x)Ni(1-y)ByO(4+delta) system, with the purpose of enhancing their mixed ionic-electronic conductivity and the electrocatalytic activity for the O-2-reduction while the crystal structure was preserved. All synthesized compounds were characterized by electrochemical impedance spectroscopy (EIS), DC conductivity measurements, X-Ray diffraction (XRD), iodometric titration and scanning electron microscopy (SEM). XRD analyses by Rietveld refinement revealed the influence of the ionic radius on the crystalline phase for the different dopants, i.e., variation of the cell parameters and M-O bond lengths. The substitution in both La and Ni sites improves La2NiO4+delta electrochemical properties as IT-SOFC cathode, since higher conductivity and lower polarization resistance were obtained. Finally, La1.5Pr0.5Ni0.8Co0.2O4+delta cathode exhibited the lowest electrode polarization resistance and activation energy values in the temperature range of 450-900 degrees C. La1.5Pr0.5Ni0.8Co0.2O4+delta was applied on an anode supported cell and a maximum power density of similar to 400 mW cm(-2) was obtained at 700 degrees C using pure hydrogen and air., This work was financially supported by Spanish Government (Grants SEV-2016-0683 and RTI2018-102161) and Generalitat Valenciana (PROMETEO/2018/006). Vicente B. Vert, Ji Haeng Yu and Dae Sik Yun are kindly acknowledged for their support during this work preparation and Forschungszentrum Julich for providing the anode supported cell.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Tuning Ternary Alloyed Nanoparticle Composition and Morphology by Exsolution in Double Perovskite Electrodes for CO2 Electrolysis

  • López-García, Andrés
  • Almar, Laura
  • Escolástico, Sonia
  • Hungría Hernández, Ana Belén
  • Carrillo, Alfonso J.
  • Serra, José Manuel
The intermittent nature of renewable energy resources makes imperative the development of efficient energy storage technologies. Solid oxide electrolysis cells (SOECs) are a promising alternative to energy conversion devices. SOECs can play an important role in the control of greenhouse gases by improving processes such as CO2 electrolysis. In order to enhance SOEC performance, exsolution of metal nanoparticles is emerging for the catalytic surface functionalization of electrodes, preventing sintering issues related to classical impregnation methods and enabling tailoring specific catalytic functions. In this work, a medium-entropy, double perovskite system SrxFeCo0.2Ni0.2Mn0.1Mo0.5O6-delta (x = 2.0, 1.9, and 1.8) was studied. We provide evidence of Fe-Co-Ni ternary alloyed exsolved nanoparticles, revealing that the alloy composition can be tuned by adjusting the reducing conditions. Exsolution temperature is critical for Fe content in nanoparticles, increasing as temperature increases, but Ni and Co are not significantly affected. Temperature adjustments allowed control over nanoparticle size and population, shrinking and growing, respectively, as temperature decreases. In contrast to what is usually described, A-site deficiency resulted in a decrease in nanoparticle exsolution because of NiO phase formation in x = 1.9 and 1.8, so that the x = 2.0 compound outperformed both non-stoichiometric materials, showing significantly larger populations. The three compounds exhibit important conductivity under both oxidizing and reducing atmospheres, which makes them promising electrodes. The Sr2FeCo0.2Ni0.2Mn0.1Mo0.5O6-delta material was integrated as a cathode in an asymmetrical electrolyte-supported cell, and its electrochemical performance under CO2 electrolysis conditions was studied. Our results showed a boost in electrocatalytic activity upon exsolution at 600 degrees C when compared to the fuel electrode without exsolved nanoparticles or exsolved at 800 degrees C, where the appearance of the secondary Ruddlesden-Popper phase was observed. Overall, here, we proved the possibility of obtaining ternary alloy exsolved nanoparticles and tuning their composition to enhance the performance of SOEC devices, paving the path for optimized metal-alloyed exsolved nanoparticle design, which might extend its applicability to other electrocatalytic processes in energy conversion and storage.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Robust catalytically-activated LSM-BCZY-based composite steam electrodes for proton ceramic electrolysis cells

  • Bausá, Nuria
  • Serra Alfaro, José Manuel
Backbone electrodes based on an electronic conductor and a protonic conductor show advantages for proton ceramic electrolyzer cells (PCECs). This work, aims to shed further light on the nature of the rate determining steps in the anode operation and improve the reaction rate in high steam pressure electrolysis mode by (i) adjusting their catalytic activity through electrode infiltration with catalytic electronic-conducting nanoparticles; and (ii) electrochemical activation of surface species by applying a net current through the electrode., Financial support by the Spanish Government (Grants SEV-2016-0683, RTI2018-102161 and ENE2014-57651), Generalitat Valenciana (PROMETEO/2018/006) and by the EU through FP7 Electra Project (Grant Agreement 621244) is gratefully acknowledged. The support of the microscopy service at Universitat Politècnica de València (UPV) for the SEM analysis is recognized.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Insights into the Promotion with Ru of Co/TiO2Fischer-Tropsch Catalysts: An in Situ Spectroscopic Study

  • Bertella, Francine
  • Lopes, C.W.
  • Foucher, A.C
  • Agostini, Giovanni
  • Concepción, Patricia
  • Martínez, Agustín
Although ruthenium is a common promoter for cobalt-based Fischer-Tropsch synthesis (FTS) catalysts, the origin of Ru promotion and promoter concentration effects remains controversial. To gain a fundamental understanding of the Ru promotion effects, we herein performed an in situ spectroscopic study by X-ray absorption spectroscopy (XAS), Fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS)-Auger of working Co/TiO2 catalysts (ca. 12 wt % Co, pure anatase TiO2 phase) promoted with different amounts of Ru (0.1-1.2 wt %). At typical FTS conditions (220 °C, 20 bar, H2/CO = 2), the activity in terms of both metal-time-yield (MTY) and initial turnover frequency (TOF) was maximized for the catalysts promoted with 0.1-0.2 wt % Ru, for which most of the Ru was alloyed with Co in bimetallic nanoparticles. The analysis of Auger electrons evidenced that the lower (apparent) TOF of accessible Co0 sites in the absence of Ru and at Ru concentrations beyond 0.2 wt % is bridged to the development, under reaction conditions, of FTS-inactive cobalt carbide (CoCx) and cobalt oxide (CoOx) patches, respectively, at the outermost surface of cobalt crystallites., Financial support by the MINECO of Spain through the Severo Ochoa (SEV2016-0683) and RTI2018-102161 projects is gratefully acknowledged. The authors are thankful to the Microscopy Service of the Universitat Politècnica de València for its assistance in microscopy characterization. XAS experiments at ambient pressure were performed on beamline BM23 at the European Synchrotron Radiation Facility (ESRF), Grenoble, France. We are grateful to Debora Motta Meira at the ESRF for providing assistance in using beamline BM23. Thanks are also due to ALBA synchrotron for allocating beamtime (XAS experiments at higher pressure) and CLÆSS beamline staff for their technical support during the experiment. F.B. (Science without Borders—Process no. 13705/13-0) and C.W.L. (Science without Borders—Process no. 13191/13-6) thank CAPES for a predoctoral fellowship. A.C.F. and E.A.S. acknowledge support to Integrated Mesoscale Architectures for Sustainable Catalysis (IMASC), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, under Award #DE-SC0012573.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The nature of active Ni sites and the role of Al species in the oligomerization of ethylene on mesoporous Ni-Al-MCM-41 catalysts

  • Moussa, Sara
  • Concepción, Patricia
  • Arribas, M.A
  • Martínez, Agustín
Although nickel dispersed in mesoporous aluminosilicates are efficient catalysts for the oligomerization of ethylene, the nature of the active nickel sites still remains controversial. Here we applied in situ FTIR-CO spectroscopy during reaction with ethylene combined with reaction kinetics with online MS analysis of reaction products to unravel the nature of the active nickel species in working mesoporous Ni-Al-MCM-41 catalysts. The results revealed that isolated ion-exchanged Ni cations are irreversibly blocked during the initial reaction stages leaving unsaturated Ni cations grafted on silanols and at the surface of small (confined) NiO nanoparticles as the active species in the pseudo-steady state. The low activity of these species in pure silica materials suggested a promotional role of aluminum in the Al-MCM-41 matrix on enhancing the activity of Ni sites, probably through a close interaction between Al species and nearby Ni sites, as inferred from quantitative Al MAS NMR and FTIR spectroscopies., This work has been financially supported by the Spanish government through the Severo Ochoa Program (SEV2016-0683) and RTI2018-102161 projects. The authors acknowledge the Microscopy Service of the Universitat Politècnica de València for its assistance in the characterization of materials by electron microscopy.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of amines in the synthesis and properties of mesostructured aluminas and assessment as supports for Co-based Fischer-Tropsch synthesis catalysts

  • Mohammadnasabomran, S.
  • Tavasoli, A.
  • Zamani, Y.
  • Márquez Álvarez, Carlos
  • Pérez-Pariente, Joaquín
  • Martínez, Agustín
The influence of addition of amines (hexylamine, tripropylamine, dodecylamine, and hexadecylamine) and dopants (Zr, Ce) on the properties of mesostructured aluminas (MAs) synthesized using either Tergitol 15-S-9 or Triton X-114 surfactants was investigated. Selected MAs were evaluated as supports for Co and Ru-Co catalysts and their Fischer-Tropsch synthesis (FTS) performance assessed at 493 K, 2.0 MPa, and H/CO = 2. The materials were characterized by XRD, N sorption, TG-DTG, EA, XPS, H-TPR, H chemisorption, and STEM. Regardless of the surfactant, all amines enlarged the pore size of undoped MAs by ca. 2–3 nm. The impact of amines on BET area and pore volume depended, however, on the surfactant-amine combination and on the presence and concentration of dopants. The Ru-promoted catalyst supported on the MA synthesized with Tergitol-tripropylamine doped with Zr displayed the highest FTS activity and C selectivity due to both high cobalt reducibility and optimum particle size (8 nm)., A. M. acknowledges the MINECO of Spain for financial support through the project RTI2018-102161. C. M.-A. and J. P.-P. also acknowledge MINECO for funding (project MAT2016-77496-R). S. M. acknowledges the organization of student affairs (Iran) for a sabbatical leave grant. The authors are thankful to the Microscopy Service of the Universitat Politècnica de València for its assistance in microscopy characterization.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tailoring La2-XAXNi1-YBYO4+δ cathode performance by simultaneous A and B doping for IT-SOFC

  • Navarrete Algaba, Laura
  • Fabuel, María
  • Yoo, C.Y.
  • Serra Alfaro, José Manuel
The present work focuses on the study of different Ruddlesden-Popper based cathode materials for Solid Oxide Fuel Cells at Intermediate Temperature (IT-SOFC). The partial substitution of La and Ni by Pr and Co, respectively, were studied in the LaPrNiCoO system, with the purpose of enhancing their mixed ionic-electronic conductivity and the electrocatalytic activity for the O-reduction while the crystal structure was preserved. All synthesized compounds were characterized by electrochemical impedance spectroscopy (EIS), DC conductivity measurements, X-Ray diffraction (XRD), iodometric titration and scanning electron microscopy (SEM). XRD analyses by Rietveld refinement revealed the influence of the ionic radius on the crystalline phase for the different dopants, i.e., variation of the cell parameters and M−O bond lengths. The substitution in both La and Ni sites improves LaNiO electrochemical properties as IT-SOFC cathode, since higher conductivity and lower polarization resistance were obtained. Finally, LaPrNiCoO cathode exhibited the lowest electrode polarization resistance and activation energy values in the temperature range of 450–900 °C. LaPrNiCoO was applied on an anode supported cell and a maximum power density of ~400 mW cm was obtained at 700 °C using pure hydrogen and air., This work was financially supported by Spanish Government (Grants SEV-2016-0683 and RTI2018-102161) and Generalitat Valenciana (PROMETEO/2018/006). Vicente B. Vert, Ji Haeng Yu and Dae Sik Yun are kindly acknowledged for their support during this work preparation and Forschungszentrum Jülich for providing the anode supported cell.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Progress in Ce0.8Gd0.2O2-: δ protective layers for improving the CO2stability of Ba0.5Sr0.5Co0.8Fe0.2O3-δ O2-transport membranes

  • Solís, Cecilia
  • Balaguer, María
  • García-Fayos, Julio
  • Palafox, E.
  • Serra Alfaro, José Manuel
Ce0.8Gd0.2O2-δ (CGO) thin films were deposited by radio frequency (RF) magnetron sputtering and deposition temperature was changed in order to optimize the microstructure and transport properties of the obtained films. Afterwards, the films were deposited on Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF) oxygen separation membranes as CO2 protective layers. Oxygen permeation was finally measured by sweeping both Ar and CO2, and the obtained results were compared with the bare BSCF membrane. It was found that the oxygen permeation of the BSCF is improved by this CGO layer, with a 4-fold improvement in the oxygen permeation flux when using pure CO2 as the sweep gas at 900 °C. Therefore, these CGO protective layers are a promising way for overcoming the limitations of BSCF membranes in CO2-containing environments, associated with surface competitive O2-CO2 adsorption and carbonation of Ba at low temperatures. This journal is, Funding from the Spanish Government (RTI2018-102161, SEV-2016-0683 and IJCI-2017-34110 grants) and Generalitat Valenciana (PROMETEO/2018/006 grant) is kindly acknowledged. The support of the Servicio de Microscopía Electrónica of the Universitat Politècnica de València is also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Characterization of oxygen transport phenomena on BSCF membranes assisted by fluid dynamic simulations including surface exchange

  • Catalán-Martínez, David
  • Santafé-Moros, A.
  • Gozálvez-Zafrilla, J. M.
  • García-Fayos, Julio
  • Serra Alfaro, José Manuel
The influence of fluid dynamic conditions on the oxygen transport through mixed ionic-electronic membranes was studied experimentally and numerically. A set of permeation experiments was performed in a wide range of operating conditions combining temperature, driving force and flow rate of air feed and sweep streams. A computational model was built and enabled to systematically evaluate the effect of the fluid dynamic conditions on O2 separation process. This model includes the surface resistance (gas exchange kinetics) and bulk oxygen-ion diffusion. The experimental set was used to obtain the model parameters by following a two-step fitting procedure: a first fitting of a simplified one-dimensional model using genetic algorithms and a subsequent refining of the parameters using the complete model implemented in COMSOL Multiphysics. The high-accuracy model allowed characterizing the O2 transport phenomena and understanding the different factors governing the overall process, e.g. by using different membrane thicknesses, sweep gases or vacuum. Simulations of the fitted model revealed the importance of the sweep effect in the O2 transport across the membrane and enabled to establish rules for both design of permeation experiments and up-scaling., This work was financially supported by Spanish Government (Grants SEV-2016-0683 and RTI2018-102161) and Generalitat Valenciana (PROMETEO/2018/006).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structure and water uptake in BaLnCo2O6−δ (Ln =La, Pr, Nd, Sm, Gd, Tb and Dy)

  • Wachowski, S.L.
  • Szpunar, I.
  • Sørby, Magnus H.
  • Mielewczyk-Gry¿, A
  • Balaguer, María
  • Ghica, C.
  • Istrate, M.C.
  • Gazda, M.
  • Gunnæs, A.E.
  • Serra Alfaro, José Manuel
  • Norby, Truls
  • Strandbakke, R.
The structure of BaLnCoO (Ln =La, Pr, Nd, Sm, Gd, Tb and Dy) was studied by the means of synchrotron radiation powder X-ray diffraction, neutron powder diffraction and Transmission Electron Microscopy (TEM), while water uptake properties were analysed with the use of thermogravimetry (TG) and water adsorption isotherms. The structure refinement revealed that the dominant phase in all compositions was orthorhombic with an ordering of the A-site cations along the c-axis and ordering of oxygen vacancies along the b-axis, which was also directly evidenced by TEM. It was shown that both unit cell volume and average Co-oxidation state at room temperature decrease linearly with decreasing Ln radius. TG water uptake experiments in humidified N–O gas mixture at 300 °C revealed that among all compositions, only BaLaCoO and BaGdCoO exhibit significant water uptake. Surface water adsorption studies showed that the α, a normalised parameter reflecting the surface hydrophilicity, mostly independently of Ln radius was close to 0.5, which means that the surface is neither hydrophobic nor hydrophilic. The results indicated that water uptake observed at 300 °C is a bulk process, which cannot be described by standard hydration/hydrogenation reaction and it is related to the layered structure of the perovskite lattice and characteristic to La or Gd being present in the lattice., The research has been supported by the National Science Centre Poland (2016/22/Z/ST5/00691), the Spanish Government (PCIN-2017-125), and the Research Council of Norway (Grant nᵒ 272797 “GoPHy MiCO”) through the M-ERA.NET Joint Call 2016. Funding from the Spanish Government (RTI2018-102161 and IJCI-2017-34110 grant) is kindly acknowledged. The authors acknowledge the skilful assistance from the staff of the Swiss–Norwegian Beamline (SNBL), at the European Synchrotron Radiation Facility (ESRF), Grenoble, France. Dr Cheng Li is at POWGEN, SNS, Oak Ridge, US and Dr Chiu C. Tang at beamline I11 at Diamond, Didcot, UK are gratefully acknowledged for PND and SR-PXD measurements, respectively, of BaGdCo2O6-δ. SLW and AMG acknowledge the CERIC-ERIC Consortium for the access to experimental facilities and the financial support (No 20187079). CG and MCI acknowledge the financial support from Romanian Ministry of Research and Innovation in the frame of the Core Program PN19-03. SLW would like to express gratitude to Małgorzata Nadolska from Gdańsk University of Technology for support in surface measurements and analysis.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Hydrogen production via microwave-induced water splitting at low temperature

  • Serra Alfaro, José Manuel
  • Borrás Morell, J.F.
  • García-Baños, Beatriz
  • Balaguer, María
  • Plaza González, P.
  • Santos-Blasco, J.
  • Catalán-Martínez, David
  • Navarrete Algaba, Laura
  • Catalá-Civera, José M.
This work was supported by the Spanish Government (RTI2018-102161, SEV-2016-0683 and Juan de la Cierva grant IJCI-2017-34110). We thank the support of the Electronic Microscopy Service of the Universitat Politècnica de València.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

High-temperature structural and electrical properties of BaLnCo2O6 positrodes

  • Szpunar, I.
  • Strandbakke, R.
  • Sørby, Magnus H.
  • Wachowski, S.L.
  • Balaguer, María
  • Tarach, M.
  • Serra Alfaro, José Manuel
  • Witkowska, A.
  • Dzik, E.
  • Norby, Truls
  • Gazda, M.
  • Mielewczyk-Gry¿, A
The application of double perovskite cobaltites BaLnCoO (Ln = lanthanide element) in electrochemical devices for energy conversion requires control of their properties at operating conditions. This work presents a study of a series of BaLnCoO (Ln = La, Pr, Nd) with a focus on the evolution of structural and electrical properties with temperature. Symmetry, oxygen non-stoichiometry, and cobalt valence state have been examined by means of Synchrotron Radiation Powder X-ray Diffraction (SR-PXD), thermogravimetry (TG), and X-ray Absorption Spectroscopy (XAS). The results indicate that all three compositions maintain mainly orthorhombic structure from RT to 1000 °C. Chemical expansion from Co reduction and formation of oxygen vacancies is observed and characterized above 350 °C. Following XAS experiments, the high spin of Co was ascertained in the whole range of temperatures for BLC, BPC, and BNC., The research has been supported by the National Science Centre Poland (2016/22/Z/ST5/00691), the Spanish Ministry of Science and Innovation (PCIN-2017-125, RTI2018-102161 and IJCI-2017-34110), and the Research Council of Norway (Grant n 272797 “GoPHy MiCO”) through the M-ERA.NET Joint Call 2016. We acknowledge the CERIC-ERIC Consortium for the access to MCX beamline at Elettra Sinchrotrone Trieste (proposal no 20187079). We also acknowledge Solaris National Radiation Centre Poland for access to the XAS/PEEM beamline (proposal no 181MS001).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

In situ raman characterization of sofc materials in operational conditions: A doped ceria study

  • Solís, Cecilia
  • Balaguer, María
  • Serra Alfaro, José Manuel
The particular operational conditions of electrochemical cells make the simultaneous characterization of both structural and transport properties challenging. The rapidity and flexibility of the acquisition of Raman spectra places this technique as a good candidate to measure operating properties and changes. Raman spectroscopy has been applied to well-known lanthanide ceria materials and the structural dependence on the dopant has been extracted. The evolution of Pr-doped ceria with temperature has been recorded by means of a commercial cell showing a clear increment in oxygen vacancies concentration. To elucidate the changes undergone by the electrolyte or membrane material in cell operation, the detailed construction of a homemade Raman cell is reported. The cell can be electrified, sealed and different gases can be fed into the cell chambers, so that the material behavior in the reaction surface and species evolved can be tracked. The results show that the Raman technique is a feasible and rather simple experimental option for operating characterization of solid-state electrochemical cell materials, although the treatment of the extracted data is not straightforward., This research was funded by the Spanish Government (IJCI-2017-34110, RTI2018-102161 and SEV-2016-0683 grants).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Towards upscaling of La5.5WO11.25-d manufacture for Plasma Spraying-Thin Film coated hydrogen permeable membranes

  • Escolástico Rozalén, Sonia
  • Solís, Cecilia
  • Comite, V.
  • Azzurri, F.
  • Gindrat, M.
  • Moser, S.
  • Rauch, J.
  • Szyndelman, G.
  • Damani, R.
  • Serra Alfaro, José Manuel
Lanthanum tungstate (La6WO12) is a promising material for the development of hydrogen separation membranes, proton ceramic electrolyzer cells and protonic ceramic fuel cells due to its interesting transport properties and stability under different operation conditions. In order to improve the hydrogen transport through the La6WO12 membranes, thin membranes should be manufactured. This work is based on the industrial production of La5.5WO11.25-¿ (LWO) powder by spray drying and the manufacturing of thin membranes by low-pressure plasma spraying (LPPS-TF) technique. LPPS-TF allows the production of dense thin films of high quality in an industrial scale. The powders produced by spray drying were morphological and electrochemically characterized. Hydrogen permeation fluxes of a membrane manufactured with these powders were evaluated and fluxes are similar to those reported previously for LWO powder produced in the lab scale. Finally, the transport properties of LWO thin films deposited on Al2O3 indicate that LPPS-TF produces high-quality LWO films with potential for integration in different applications., This work was financially supported by the European Union (DEMOYS Project, FP7/2007-2013-Grant Agreement 241309) and the Spanish Government (RTI2018-102161, SEV-2016-0683 and IJCI-2016-28330 grants).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sustainable production of hydrogen via steam reforming of furfural (SRF) with Co-catalyst supported on sepiolite

  • Sayas, S.
  • Da Costa-Serra, J. F.
  • Chica Lara, Antonio
Natural sepiolite is a mineral very abundant in Spain, being the main producer worldwide. This material is presented by the first time as promised support to prepare cobalt catalysts with high activity and hydrogen selectivity in the steam reforming of furfural (SRF). Two methods for cobalt incorporation on natural sepiolite, precipitation (PP) and incipient wetness impregnation (IWI), are explored and their influence in the preparation of catalysts highly active and selective in the SRF is studied. PP method makes possible to synthesize a catalytic material with high catalytic performance (high conversion of furfural, > 95%, and high hydrogen selectivity, 70%). Furthermore the production of non-desired byproducts such as CO, CH and acetone, decrease significantly in the catalyst prepared by PP (CoSep). Characterization by N adsorption-desorption to determine surface area, XRD, TPR and TEM shows that PP method favors the formation of smaller metallic particles of Co with a high dispersion. These differential physicochemical properties seem to explain the better catalytic performance exhibited by the sepiolitic catalyst prepared by the PP method (CoSep). In addition, this catalyst exhibits also a higher resistance to deactivation after 24 h of reaction time. This fact seems to be related to the lower coke deposition on the catalyst prepared by precipitation and particularly, with the lower sinterization of the metallic Co particles during the steam reforming of furfural., Thank you to the Spanish Government (Project RTI2018-102161-I00) and Generalitat Valenciana (PROMETEO/2018/006 grant) for the fanatical supporting. The support of the microscopy service at Universitat Politècnica de València (UPV) for the SEM and TEM analysis is also recognized.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Biogas dry reforming over Ni–Ce catalyst supported on nanofibered alumina

  • González, Juan José
  • Da Costa-Serra, J. F.
  • Chica Lara, Antonio
Four catalysts based on Ni and Ni–Ce supported on two γ-aluminas with different morphology (nanofibers and nanograins) have been prepared and studied in the dry reforming of simulated biogas. Catalysts were characterized by N physisorption, X-ray diffraction (XRD), temperature-programmed reduction (TPR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), inductively coupled plasma with optical emission spectrometer (ICP-OES), chemisorption of H and elemental analysis (EA) to determine their most relevant physicochemical properties. Characterization results show that metallic Ni particles supported on nanofibered alumina (NFA) presents a higher dispersion and smaller size than that supported on the nanograiny alumina (NGA) probably due to the higher mesoporosity presented by the NFA support. On the other hand, the incorporation of Ce has a similar effect than the fibrous morphology, decreasing also the size of the Ni metallic particles and increasing their dispersion. In the dry reforming of synthetic biogas (CH/CO = 1.5) the nanofibered alumina containing 5 wt% Ni and 1.5 wt% Ce (NiCe/NFA) showed the highest catalytic activity at 750 °C (98% CO conversion) and stability (7.7% nickel sinterization level and 2.9 wt% carbon deposition). The stability of this catalyst was also demonstrated at 750 °C during 55 h of reaction time with a loss of activity at the steady state under 2%. In addition, the catalyst was regenerated at 600 °C in oxygen flow, recovering completely its initial catalytic performance. The excellent catalytic behavior of NiCe/NFA material has been related to the fibrous morphology of the alumina support, which promotes a better dispersion of the supported Ni metal particles, decreasing their size and increasing the number of actives sites where dry reforming reaction can take place. In addition, the incorporation of Ce seems to have also an important role by increasing the Ni-support interactions, decreasing sinterization of the metallic Ni particles and coke deposition. The contribution of both effects (morphology and Ce), separately and in combination, have been proved to enhance significantly the catalytic activity and stability of the synthesized catalysts in the dry reforming of simulated biogas., Thank you to the Spanish Government, Spain (Project RTI2018-102161-I00) and Generalitat Valenciana, Spain (PROMETEO/2018/006 grant) for the financial support. The support of the microscopy service at Universitat Politècnica de València (UPV) for the SEM and TEM analysis is also recognized.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Zeolite-supported Ni catalysts for CO2 methanation: Effect of zeolite structure and Si/Al ratio

  • Da Costa-Serra, J. F.
  • Cerdá Moreno, Cristina
  • Chica Lara, Antonio
The urgent need to reduce CO emissions requires the development of efficient catalysts for the conversion of CO into chemicals and fuels. In this study, a series of nickel catalysts supported on ITQ-2 and ZSM-5 zeolites have been prepared, characterized and tested in the hydrogenation reaction of CO towards methane. Specifically, two ITQ-2 and two ZSM 5 zeolites with different aluminum content have been studied. For both types, the higher Si/Al ratio of the material, the more active the catalyst due probably to its higher hydrophobicity. The largest difference was found for the ITQ-2 samples, being the CO conversion for the sample with a greater Si/Al ratio 50 points higher at 350 °C. Comparing both zeolite structures, while similar catalytic results were obtained with the samples with lower Si/Al ratio, a distinctly higher activity was found for the ITQ-2 zeolite without aluminum, pure silica. Therefore, this result suggests that the presence of aluminum is of particular relevance. Among the studied materials, the catalyst supported on the delaminated ITQ-2 zeolite without Al was the most active catalyst. Its higher activity was mainly attributed to the smaller crystallite size of nickel supported on the large external surface area presented by this zeolite., This research was funded by the Spanish Ministry of Science, Innovation and Universities, grant numbers SVP-2014-068713 and RTI2018-102161-B-I00.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Sustainable production of hydrogen by steam reforming of ethanol using cobalt supported on nanoporous zeolitic material

  • Da Costa-Serra, J. F.
  • Navarro, María Teresa
  • Rey García, Fernando
  • Chica Lara, Antonio
Cobalt catalysts supported on Y zeolite and mesoporized Y zeolite (Y-mod) have been studied in steam reforming of ethanol (SRE). Specifically, the eect of the mesoporosity and the acidity of the y zeolite as a support has been explored. Mesoporous were generated on Y zeolite by treatment with NH4F and the acidity was neutralized by Na incorporation. Four cobalt catalysts supported on Y zeolite have been prepared, two using Y zeolite without mesoporous (Co/Y, Co/Y-Na), and two using Y zeolite with mesoporous (Co/Y-mod and Co/Y-mod-Na). All catalysts showed a high activity, with ethanol conversion values close to 100%. The main dierences were found in the distribution of the reaction products. Co/Y and Co/Y-mod catalysts showed high selectivity to ethylene and low hydrogen production, which was explained by their high acidity. On the contrary, neutralization of the acid sites could explain the higher hydrogen selectivity and the lower ethylene yields exhibited by the Co/Y-Na and Co/Y-mod-Na. In addition, the physicochemical characterization of these catalysts by XRD, BET surface area, temperature-programmed reduction (TPR), and TEM allowed to connect the presence of mesoporous with the formation of metallic cobalt particles with small size, high dispersion, and with high interaction with the zeolitic support, explaining the high reforming activity exhibited by the co/y-mod-Na sample as well as its higher hydrogen selectivity. It has been also observed that the formation of coke is aected by the presence of mesoporous and acidity. Both properties seem to have an opposite eect on the reforming catalyst, decreasing and increasing the coke deposition, respectively., “This research was funded by Generalitat Valenciana, grant number PROMETEO/2018/006”, Spanish Government (Project RTI2018-102161-I00) and RED DE EXCELENCIA EN BIORREFINERIAS SOSTENIBLES (RED2018-102623-T).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Potentiometric c2h4-selective detection on solid-state sensors activated with bifunctional catalytic nanoparticles

  • Toldrá-Reig, Fidel
  • Serra Alfaro, José Manuel
This work presents a solid-state ionic-based device to selectively detect C2H4 in car exhaust gases. The sensor consists of 8YSZ as the electrolyte and two electrodes: Fe0.7Cr1.3O3/8YSZ and LSM/8YSZ. The main aim of this work is to optimize the catalytic behavior of the working electrode to C2H4 and reduce cross-sensitivity toward CO and H2O. Several catalyst nanoparticles were infiltrated to tailor C2H4 adsorption and electrochemical oxidation properties while diminishing adsorption and conversion of other gas components such as CO. The infiltrated metal catalysts were selected, taking into account both adsorption and redox properties. Infiltration of Ti or Al, followed by a second infiltration of Ni, enabled the selective detection of C2H4 with low cross-sensitivity toward CO and H2O in a moist gas environment. Further insight into potentiometric C2H4 sensing is achieved by electrochemical impedance analysis of the electrodes activated with bifunctional catalysts., Funding from the Spanish Government (Grants FPU13/03478, AP-2003-03478, and RTI2018- 102161) is kindly acknowledged
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Exploring the stability of fe–ni alloy nanoparticles exsolved from double-layered perovskites for dry reforming of methane

  • Carrillo, Alfonso J.
  • Serra Alfaro, José Manuel
Exsolution is emerging as a promising route for the creation of nanoparticles that remain anchored to the oxide support, imparting remarkable stability in high temperature chemical processes such as dry reforming of methane. This process takes place at temperatures around 850 °C, which causes sintering-related issues in catalysts prepared using conventional impregnation methods, which could be overcome by using exsolution functionalized oxides. In this work, FeNi3 alloy nanoparticles exsolved from Sr2FexNi1-xMoO6-δ double-layered perovskites were evaluated as a dry reforming catalyst, paying special attention to structure–activity relationships. Our results indicate that increasing the Ni content favors the nanoparticle dispersion, eventually leading to increased CO2 and CH4 conversions. The exsolved nanoparticles presented remarkable nanoparticle size (ca. 30 nm) stability after the 10 h treatment, although the formation of some phase segregations over the course of the reaction caused a minor decrease in the nanoparticle population. Overall, the results presented here serve as materials processing guidelines that could find further potential use in the design of more efficient (electro)catalysts in other fuel production or energy conversion technologies., The project that gave rise to these results received the support of a fellowship from “la Caixa” Foundation (ID 100010434). The fellowship code is LCF/BQ/PI20/11760015. Additional funding from the Spanish Government (Grant RTI2018-102161) is also acknowledged
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Intensification of catalytic CO2 methanation mediated by in-situ water removal through a high-temperature polymeric thin-film composite membrane

  • Escorihuela, Sara
  • Cerdá Moreno, Cristina
  • Weigelt, F.
  • Remiro-Buenamañana, Sonia
  • Escolástico Rozalén, Sonia
  • Tena, Alberto
  • Shishatskiy, S.
  • Brinkmann, T.
  • Chica Lara, Antonio
  • Serra Alfaro, José Manuel
Catalytic CO methanation technology can be improved by process intensification, i.e. enabling higher energy efficiency and process sustainability. Here, thin-film composite membranes (TFCM) were developed for in-situ water removal in a catalytic membrane reactor (CMR) for the Sabatier process. The selective separation layer (1.4 μm-thick) of the composite membrane is made of the polyimide 6FDA-6FpDA, a glassy polyimide, which exhibits high permeability and selectivity together with stable function at unprecedented high temperatures (>200 °C), compared to polyimides reported until now (90 °C), thus matching the temperature range of Sabatier reactors. Remarkably, TFCM developed in this work, allow to extract an outstanding amount of water up to 1 m/(m·h·bar) at 260 °C. TFCM was implemented for the water removal from the methanation reaction in a CMR operated at 260 °C and using Ni-Todorokite as catalyst. The TFCM-mediated water-extraction enabled to raise both catalytic stability and activity during CMR operation. CO conversion stability was greatly improved exhibiting a conversion value of 72 % during the course of the reaction (21 % increase in CO conversion), with a water removal of 12.5 % and specific flux of ∼100 g·h m., This work was financially supported by the Spanish Government (SVP-2014-068356, SVP-2014-068713, RTI2018-102161 and IJCI-2016-28330 grants) and Generalitat Valenciana (PROMETEO/2018/006 grant)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Copper surface-alloying of H2-permeable Pd-based membrane for integration in Fischer–Tropsch synthesis reactors

  • Escorihuela, Sara
  • Toldrá-Reig, Fidel
  • Escolástico Rozalén, Sonia
  • Murciano, Raúl
  • Martínez, Agustín
  • Serra Alfaro, José Manuel
Self-supported palladium tubular membranes are surface-functionalized and tested for the selective and controlled addition of H along a fixed-bed catalytic reactor for Fischer–Tropsch hydrocarbon synthesis (FTS). In order to avoid CO poisoning of the active sites of the metallic membrane at low working temperatures (~250 °C), a Cu-based protective layer is deposited on the outer surface of a tubular membrane by RF sputtering at room temperature. Upon thermal treatment in H, the Cu layer alloys with Pd on the membrane surface, as confirmed by means of XRD, FESEM and TEM, while the membrane assembly is fully functional, i.e. the negative effect of CO surface adsorption is highly diminished and the membrane provides an appropriate H flux (e.g. 12 ml/min·cm) under the harsh operation conditions practiced in FT synthesis. When the Cu-functionalized membrane is fully integrated in the FTS reactor (250 °C, 20 bar, 30% CO in feed), the membrane delivers a stable H permeation flux and enables to increase the yield of hydrocarbons in the range of gasoline (C–C) while reducing methane formation over a bifunctional CoRu/AlO-zeolite catalyst., This work was financially supported by the Spanish Government (SEV-2016-0683, SVP-2014-068356, FPU13/03478, RTI2018-102161 and IJCI-2016-28330 grants) and Generalitat Valenciana (PROMETEO/2018/006 grant).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Short-channel mesoporous SBA-15 silica modified by aluminum grafting as a support for CoRu Fischer-Tropsch synthesis catalysts

  • Mohammadnasabomran, S.
  • Márquez-Alvarez, Carlos
  • Pérez-Pariente, Joaquín
  • Martínez, Agustín
Highly ordered short-channel mesoporous silica SBA-15 with large pores (11.2 nm) has been synthesized by using tetramethyl orthosilicate (TMOS) as a silica source, the amphiphilic block copolymer Pluronic PE-10400 as a structure-directing agent, and 1,3,5-triisopropylbenzene as a swelling agent. The Al-SBA-15 support was prepared by multiple cycles of grafting of Alsec-butoxide dissolved in toluene on the calcined SBA-15 material, aiming at covering the channel surface with a subnanometric layer of Al-O chemical species. Both the pristine and the Al-containing materials have been used as supports for preparing 20 wt% Co catalysts promoted with 1 wt% Ru and then evaluated for Fischer-Tropsch synthesis (FTS). The samples have been characterized by ICP-OES, elemental analysis, Nphysisorption, XRD, electron microscopy, FTIR-pyridine, H-TPR, Hchemisorption, and XPS. The ordered mesopore architecture of the starting support was preserved during the grafting treatment, but the pore size was reduced from 11.2 to 10.0 nm, while the pore volume and surface area also decreased. No segregated alumina phase was detected. It was found that the Al-grafting remarkably improves the Co dispersion and favors a more homogeneous distribution of the metal species along the SBA-15 particles. Under conventional FTS conditions (220 °C, 2.0 MPa, H/CO = 2), the Al-grafted CoRu/Al-SBA-15 catalyst exhibited a lower TOF for the exposed Cosites resulting in a lower CO conversion and cobalt-time-yield (CTY) with respect to the all-silica CoRu/SBA-15 counterpart. However, CoRu/Al-SBA-15 displayed, at constant CO conversion (∼40%), an enhanced selectivity to liquid hydrocarbons (C-C) to the detriment of waxes (C). While the lower activity of CoRu/Al-SBA-15 was mainly ascribed to a greater abundance of very small (<6 nm) Conanoparticles with a lower TOF, the shift in selectivity towards lighter hydrocarbons was related, in addition to the contribution of sub-6 nm Coparticles, to an enhanced CO diffusion limitation and to the cracking of long-chain FTS products on the Brønsted acid sites present in this catalyst., A. M. acknowledges the MINECO of Spain for financial support through the Severo Ochoa (SEV2016-0683) and RTI2018-102161 projects. C. M.-A. and J. P.-P. also acknowledge funding of the Spanish Ministry of Science Innovation and Universities (project PID2019-107968RB-I00, AEI, Spain). S. M. acknowledges the organization of student affairs (Iran) for a sabbatical leave grant. The authors are thankful to the Microscopy Service of the Universitat Politècnica de València for its assistance in microscopy characterization. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

CuZnAl hydrotalcites as suitable precursors for chromium-free ester hydrogenolysis catalysts

  • Aubrecht, Jaroslav
  • Pospelova, Violetta
  • Martínez, Agustín
  • Concepción, Patricia
  • Kikhtyanin, Oleg
  • Straka, Petr
  • Kubicka, David
Ester hydrogenolysis is industrially performed over Adkins catalysts. Their use is being restricted as they contain environmentally unfriendly CrO. As a potential replacement, five co-precipitated CuZnAl catalysts with various Cu/Zn and Al/(Cu+Zn) atomic ratios were studied. The structure transformation during the whole catalyst lifecycle was determined. The catalyst precursors consisted of CuZnAl-hydrotalcite (HTC). Although the Cu/Zn ratio did not affect the HTC structure, an increase in Al content resulted in smaller Cu nanoparticles with a larger surface area. In the reduced catalysts, both Cu and Cu species were identified using FTIR-CO. XPS revealed catalyst surface reconstruction after catalyst reduction and catalytic reaction. The evaluation of the catalysts in dimethyl adipate hydrogenolysis indicated that the catalyst having the lowest Cu loading possessed the highest activity, due to its high S and Cu/Zn = 1. Generally, higher activity was achieved by reducing the Cu/Zn and increasing the Al/(Cu+Zn) ratios., Financial support from Czech Science Foundation (project No. GA17–05704S and GA20–28093S) is greatly acknowledged. The catalyst precursors were prepared with support of CATPRO infrastructure. Experimental results were accomplished by using Large Research Infrastructure ENREGAT supported by the Ministry of Education, Youth and Sports of the Czech Republic under project no. LM2018098. P.C. and A.M. acknowledge financial support from the Spanish Government through the RTI2018–099668-B-C21 and RTI2018–102161 projects. The authors are grateful to the Microscopy Service of the Universitat Politècnica de València (UPV) for assistance in microscopy characterization., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Chemical and mechanical stability of BCZY-GDC membranes for hydrogen separation

  • Mercadelli, Elisa
  • Gondolini, A.
  • Ardit, Mateo
  • Cruciani, Giuseppe
  • Melandri, Cesare
  • Escolástico Rozalén, Sonia
  • Serra Alfaro, José Manuel
  • Sanson, Alessandra
This work investigates, for the first time, the hydrogen permeation of BaCeZrYO-CeGdO (BCZY-GDC) asymmetric membranes for 100 h, using wet 15% CO in Ar as sweep gas. In the same frame, ex-situ aging tests were performed for 100 h exposure at 750 °C in different atmospheres (H, CO, H + CO), to evaluate the phase, microstructure, and mechanical long-term stability of this system. The thermal aging in H-atmosphere leads to lower flexural strength caused by a microstructure embrittlement of the BCZY-GDC asymmetric membrane, due to chemical expansion/contraction of the GDC cell after the aging cycle. Indeed, micro-cracking of GDC grains, that decreases the composite hardness, is observed in symmetric (pressed pellet) membranes. The aging in CO causes a slightly increase in flexural strength values due to the formation of sub-micrometric Zr-doped ceria-BaCO phases at the expense of the perovskite. Higher hardness values related to the emerging of BaCO islands on the symmetric membrane surface were also recorded. In H + CO atmosphere (real testing condition), the membrane shows a slight decrease in flexural strength and hardness while no evident morphological or structural changes (except the BaCO formation in traces) were observed. This study highlights that promising and stable hydrogen permeation flux values can be recorded using the asymmetric configuration for 100 h, using wet 15% CO in Ar as sweep gas. Neither structural nor morphological modification of the membrane were detected after the testing., This work was financially supported by the agreement between the Italian Ministry of Economic Development and the Italian National Research Council ‘‘Ricerca di sistema elettrico nazionale’’ and by the Spanish Government (RTI2018-102161) and the Generalitat Valenciana (PROMETEO/2018/006)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Reversible electrodes based on B-site substituted Ba0.5Sr0.5Co0.8Fe0.2O3-δ for intermediate temperature solid-oxide cells

  • Navarrete Algaba, Laura
  • Hannahan, C.
  • Serra Alfaro, José Manuel
The BaSrCoFeO perovskite is a promising electrode material for solid-oxide electrochemical cells exhibiting excellent oxygen reduction reaction (ORR) activity and mixed ionic-electronic transport properties at intermediate temperatures but suffers from stability issues. In this work, the effect on stability and electrochemical performance of several B-site substituted cations (Sc, Zr, Y) are studied. The presence of these substituted cations improved stability by preventing (a) the formation of the detrimental hexagonal phase during long term air exposure experiments and (b) reducing the formation of carbonates in CO-containing atmospheres. Symmetrical cell testing revealed that the Sc-substituted material mixed with an ionic gadolinium-doped ceria (GDC) phase has the lowest polarization resistance among the materials and thus was chosen as the cathode for the full cell construction. The composite electrode achieved encouraging power density values ~877 mW/cm at 700 °C. The material showed stable hydrogen generation during intermediate temperature electrolysis tests and its performance improved upon the introduction of CO to carry out co-electrolysis. Furthermore, methane was obtained during co-electrolysis and Sabatier reaction at temperatures below 450 °C. The superior stability and performance of the Sc-substituted BaSrCoFeO make it an exciting candidate for application as a cathode in reduced temperature electrochemical cells., This work was financially supported by the Spanish Government (RTI2018-102161 grant) and Generalitat Valenciana (PROMETEO/2018/006 grant)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermo-fluid dynamics modelling of steam electrolysis in fully-assembled tubular high-temperature proton-conducting cells

  • Catalán-Martínez, David
  • Navarrete Algaba, Laura
  • Tarach, M.
  • Santos-Blasco, J.
  • Vøllestad, Einar
  • Norby, Truls
  • Budd, M.I.
  • Veenstra, P.
  • Serra Alfaro, José Manuel
Electrolysis based on renewable energies offers a promising carbon-free solution for hydrogen generation and storage. The recent developments of proton ceramic electrolysis cells operating at intermediate temperatures bear promise of superior energy efficiency compared to oxide ion conducting electrolytes. Here, a proton ceramic Single Engineering Unit (SEU) design is optimized for steam electrolysis using a computational fluid dynamics (CFD) model implemented in a COMSOL Multiphysics software. The SEU is an all-in-one tubular cell arrangement that constitutes the smallest electrolysis unit and enables efficient, adaptable pressurized hydrogen generation. The parametrical modelling study is conducted for two adiabatic operation scenarios with distinct steam conversion rates and tested for multiple key parameters, namely internal and external chamber pressures and inlet stream temperature. The modelling results show that low steam conversions enable operation at higher current densities and that the thermoneutral voltage for a fixed steam conversion is highly sensitive to the process conditions and operation modes. The increment of the pressure of the generated hydrogen implies a reduced production rate at thermoneutral voltage, although it can be compensated with an enhanced steam pressure or a reduced inlet temperature. Additionally, the introduction of a porous medium as the SEU current collector in the steam chamber enhances heat transport within this chamber. The area specific resistance of the system determines the current density, enforcing an adaption of the area of the electrolyser to satisfy the target hydrogen production and energy efficiency. The resulting proposed SEU design and adapted operational parameters allow effective delivery of pressurized dry hydrogen for a wide range of conditions and applications., The work leading to these results has received funding from Spanish Government (RTI2018-102161 grant) and from Fuel Cells and Hydrogen 2 Joint Undertaking under grant agreement 779486 (‘GAMER’). This Joint Undertaking receives support from the European Union’s Horizon 2020 research and innovation programme, Hydrogen Europe and Hydrogen Europe research.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Redox-stable composite electrodes for CH4 conversion reactors based on proton ceramic electrochemical cells

  • Almar, Laura
  • Bausá, Nuria
  • Fabuel, María
  • Escolástico Rozalén, Sonia
  • Serra Alfaro, José Manuel
Electrochemical reactors based on proton-conducting ceramic electrolytes show a great potential in the conversion of hydrocarbons by enabling the intensification via the in-situ extraction of the H produced. However, non-oxidative operation conditions lead to the progressive coke formation on the catalyst and electrodes and thus, an oxidative regeneration cycle is required to restore the catalyst activity. Consequently, newly redox-stable electrodes are required to enable operation under both non-oxidative H-extraction and coke-oxidation conditions. Here, four composite materials were investigated as redox-stable electrode backbones for their integration in proton-conducting cells, composed by the proton conductor BaCeZrYO (BCZY27) and LaSrFeO (LSF8515), LaSrFeO (LSF55), LaSrCrMnO (LSCM) or LaSrMnO (LSM). Chemical compatibility with the electrolyte and electrochemical performance were characterized in the range 500–800 °C. LSCM/BCZY27 and LSM/BCZY27 showed the best performance. The electrode activity was boosted by catalytically activating with Pt and CeO nanoparticles while exhibiting outstanding stability upon redox cycling. LSM/BCZY27+Pt/CeO showed the lowest polarization resistance, i.e., achieving 0.7 Ω cm at 700 °C in 10% CH and 9% H and 0.14 Ω cm in air, revealing a high potential as redox-stable electrode for non-oxidative hydrocarbon conversion in electrochemical reactors., Part of the present research was developed in the frame of N. Bausá’s PhD thesis (Chapter 9) that has received funding from Spanish Government (RTI2018-102161 grant). This work has been also supported by the WINNER project. This project has received funding from the Fuel Cells and Hydrogen 2 Joint Undertaking (now Clean Hydrogen Partnership) under Grant Agreement No 101007165. This Joint Undertaking receives support from the European Union's Horizon 2020 Research and Innovation program, Hydrogen Europe and Hydrogen Europe Research.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Tuning Ternary Alloyed Nanoparticle Composition and Morphology by Exsolution in Double Perovskite Electrodes for CO2Electrolysis

  • López-García, Andrés
  • Almar, Laura
  • Escolástico Rozalén, Sonia
  • Hungría, Ana B.
  • Carrillo, Alfonso J.
  • Serra Alfaro, José Manuel
The intermittent nature of renewable energy resources makes imperative the development of efficient energy storage technologies. Solid oxide electrolysis cells (SOECs) are a promising alternative to energy conversion devices. SOECs can play an important role in the control of greenhouse gases by improving processes such as CO2 electrolysis. In order to enhance SOEC performance, exsolution of metal nanoparticles is emerging for the catalytic surface functionalization of electrodes, preventing sintering issues related to classical impregnation methods and enabling tailoring specific catalytic functions. In this work, a medium-entropy, double perovskite system SrxFeCo0.2Ni0.2Mn0.1Mo0.5O6-δ (x = 2.0, 1.9, and 1.8) was studied. We provide evidence of Fe-Co-Ni ternary alloyed exsolved nanoparticles, revealing that the alloy composition can be tuned by adjusting the reducing conditions. Exsolution temperature is critical for Fe content in nanoparticles, increasing as temperature increases, but Ni and Co are not significantly affected. Temperature adjustments allowed control over nanoparticle size and population, shrinking and growing, respectively, as temperature decreases. In contrast to what is usually described, A-site deficiency resulted in a decrease in nanoparticle exsolution because of NiO phase formation in x = 1.9 and 1.8, so that the x = 2.0 compound outperformed both non-stoichiometric materials, showing significantly larger populations. The three compounds exhibit important conductivity under both oxidizing and reducing atmospheres, which makes them promising electrodes. The Sr2FeCo0.2Ni0.2Mn0.1Mo0.5O6-δ material was integrated as a cathode in an asymmetrical electrolyte-supported cell, and its electrochemical performance under CO2 electrolysis conditions was studied. Our results showed a boost in electrocatalytic activity upon exsolution at 600 °C when compared to the fuel electrode without exsolved nanoparticles or exsolved at 800 °C, where the appearance of the secondary Ruddlesden-Popper phase was observed. Overall, here, we proved the possibility of obtaining ternary alloy exsolved nanoparticles and tuning their composition to enhance the performance of SOEC devices, paving the path for optimized metal-alloyed exsolved nanoparticle design, which might extend its applicability to other electrocatalytic processes in energy conversion and storage., The project that gave rise to these results received the support of a fellowship from Spanish Government (RTI2018-102161 grant) and “la Caixa” Foundation (ID 100010434 and grant LCF/BQ/PI20/11760015).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Structural properties of mixed conductor Ba1−xGd1−yLax+yCo2O6−δ

  • Strandbakke, Ragnar
  • Wragg, David S.
  • Sørby, Magnus H.
  • Guzik, Matylda N.
  • Gunnæs, A.E.
  • Szpunar, I.
  • Wachowski, S.L.
  • Balaguer, María
  • Carvalho, Patricia A.
  • Mielewczyk-Gryn, Aleksandra
  • Serra Alfaro, José Manuel
  • Norby, Truls
BaGdLaCoO (BGLC) compositions with large compositional ranges of Ba, Gd, and La have been characterised with respect to phase compositions, structure, and thermal and chemical expansion. The results show a system with large compositional flexibility, enabling tuning of functional properties and thermal and chemical expansion. We show anisotropic chemical expansion and detailed refinements of emerging phases as La is substituted for Ba and Gd. The dominating phase is the double perovskite structure Pmmm, which is A-site ordered along the c-axes and with O vacancy ordering along the b-axis in the Ln-layer. Phases emerging when substituting La for Ba are orthorhombic Ba-deficient Pbnm and cubic LaCoO-based R3̄c. When La is almost completely substituted for Gd, the material can be stabilised in Pmmm, or cubic Pm3̄m, depending on thermal and atmospheric history. We list thermal expansion coefficients for x = 0-0.3, y = 0.2., The research has been supported by the National Science Centre Poland (2016/22/Z/ST5/00691), the Spanish Ministry of Science and Innovation (PCIN-2017-125, RTI2018-102161 and IJCI-2017-34110), and the Research Council of Norway (Grant no. 272797 “GoPHy MiCO”) through the M-ERA.NET Joint Call 2016. The authors acknowledge the skilful assistance from the staff of the Swiss–Norwegian Beamline (SNBL) at the European Synchrotron Radiation Facility (ESRF), Grenoble, France. Dr. Cheng Li at POWGEN, SNS, Oak Ridge, US and Dr. Chiu C. Tang at beamline I11 at Diamond, Didcot, UK are gratefully acknowledged for PND and SR-PXD measurements, respectively.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Impact of lattice properties on the CO2 splitting kinetics of lanthanide-doped cerium oxides for chemical looping syngas production

  • Laqdiem, Marwan
  • Carrillo, Alfonso J.
  • Dimitrakopoulos, Georgios
  • Balaguer, María
  • García-Fayos, Julio
  • Ghoniem, Ahmed E.
  • Serra Alfaro, José Manuel
Cerium oxide (CeO) is the state-of-the-art material for syngas production from CO and HO splitting via (methane assisted-) solar-driven thermochemical cycles. This technology consists of two separate processes: (1) a partial reduction of the oxide with methane at ∼900 °C that produces syngas and generates oxygen vacancies in the oxide lattice; and (2) oxidation of the reduced oxide by reaction with HO and/or CO to form H and/or CO, respectively, which incorporates oxygen into the oxygen vacancy lattice sites. Doping the cerium oxide with other cations enables to increase the oxygen-vacancy concentration or to induce changes in the crystal lattice, aiming at increasing the fuel yield and/or boosting the redox oxygen-exchange kinetics. Traditionally, CeO has been doped with lanthanides to improve the redox behavior and enhance ionic conduction. For lanthanide-doped cerium oxides, a correlation between the dopant's ionic radius and the material's ionic conductivity has been established. Here, we examine the impact of the trivalent lanthanide dopants on the methane partial oxidation and CO splitting. Our results reveal a correlation between the dopant ionic radius, ionic conductivity, oxygen exchange kinetics, and CO splitting kinetics. We could identify the optimum ionic radius for enhanced CO splitting kinetics based on our observations. These findings are an essential framework for designing more advanced redox materials for chemical looping syngas production., Financial support by the Spanish Ministry of Science and Innovation (RTI2018-102161 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033), and MIT International Science and Technology Initiatives (MISTI) Seed Funds, in particular MISTI-Spain Inditex, is gratefully acknowledged. The authors would like to thank Dr. J. L. Jordà for the help with XRD and M. Tadeo and. A. Ferrero for the assistance with BET measurements. Also, we acknowledge the support of the Servicio de Microscopía Elcectrónica of the UPV. Especially, we are thankful to M. Fabuel for the help with the materials elaboration., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Promotion of mixed protonic-electronic transport in La5.4WO11.1−δ membranes under H2S atmospheres

  • Escolástico Rozalén, Sonia
  • Balaguer, María
  • Solís, C.
  • Toldrá-Reig, Fidel
  • Somacescu, S.
  • Gerhards, U.
  • Aguadero, A.
  • Haas-Santo, K.
  • Dittmeyer, R.
  • Serra Alfaro, José Manuel
Catalytic membrane reactors (CMR) based on H-separation membranes can improve the performance of thermodynamically-limited reactions such as high-pressure steam methane reforming, ammonia cracking, non-oxidative aromatics production, and water gas shift reaction (WGS). In these industrial processes, the membrane surfaces are typically exposed to steam, CO, CO, HS, and hydrocarbons in combination with high temperatures. Therefore, the membrane materials require long-term thermo-chemical stability under the mentioned conditions. Stability in HS is of outstanding importance since its presence, even at ppm level, gives rise to substantial surface poisoning and decomposition of most materials. Here we characterize the influence of HS on the crystalline structure, lattice composition, and hydrogen-transport properties of LaWO, one of the reference protonic membrane materials. The incorporation of sulfide ions in the crystal lattice is ascertained from XRD, XPS, FESEM, WDS, EDS, and FIB-SIMS analyses. UV-vis spectroscopy and EIS measurements illustrate the effect of the incorporated sulfur in the transport properties, i.e., vigorously promoting the electronic conductivity mediated by the concurrent partial reduction of tungsten cations (W). The rise in electronic conductivity allowed an H flux of 0.042 mL cm min to be reached at 700 °C for a ∼700 μm-thick membrane, in contrast with negligible H permeation in HS-free conditions., This work was financially supported by the Spanish Government (RTI2018-102161, IJCI-2016-28330, IJCI-2017-34110, FPU13/03478 and CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) and by MCIN with funding from NextGenerationEU (PRTR-C17.I1) within the Planes Complementarios con CCAA (Area of Green Hydrogen and Energy) and it has been carried out in the CSIC Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

The role of ionic-electronic ratio in dual-phase catalytic layers for oxygen transport permeation membranes

  • Laqdiem, Marwan
  • García-Fayos, Julio
  • Almar, Laura
  • Balaguer, María
  • Serra Alfaro, José Manuel
Oxygen transport membrane (OTM) is an appealing technology for contributing to the decarbonization of the industry via oxy-combustion processes. Dual-phase composite materials are promising membrane candidates for this kind of processes due to their stability under CO atmospheres. Even so, the oxygen permeation through this kind of membranes is still limiting for practical application. A key well-studied membrane performance parameter is the ratio between composite crystalline phases since the percolative channels for each phase determine the final oxygen permeation flux. Here, we investigate the influence of the phase ratio on the surface-exchange reactions in catalytically-activated composite membranes composed of NiFeO (NFO) and CeTbO (CTO). Electrical impedance spectroscopy (EIS) and oxygen permeation studies revealed a decrease in polarization resistance and an increase in oxygen flux as the ionic-phase proportion in the catalytic layers increases. At 850 °C, the 20NFO80CTO catalytic layer on a 650 μm-thick 50NFO50CTO membrane reaches an oxygen flux of 0.2 mL min·cm. That permeation was improved by a factor of 2.5 regarding the opposite phase ratio (80NFO20CTO) and 1.3 regarding a balanced phase ratio (50NFO50CTO) in the catalytic layer. The 20NFO80CTO electrodes showed the lowest resistances compared to the electrodes with higher NFO content, confirming that the O surface exchange is controlled by ionic-phase mechanisms rather than electronic phase ones., Financial support by the Spanish Ministry of Science and Innovation (RTI2018-102161 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033), and the Universitat Politècnica de València (UPV) is gratefully acknowledged. The authors would like to thank Dr. J. L. Jordà for the help with XRD. Also, we acknowledge the support of the Servicio de Microscopía Electrónica of the UPV. We thank M. Fabuel for helping with the material and sample elaboration, With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Ni and Co-based catalysts supported on ITQ-6 zeolite for hydrogen production by steam reforming of ethanol

  • Da Costa-Serra, J. F.
  • Miralles-Martínez, A.
  • García-Muñoz, B.
  • Maestro-Cuadrado, S.
  • Chica Lara, Antonio
Ni and Co catalysts supported on ITQ-6 zeolite have been synthesized and evaluated in the steam reforming of ethanol (SRE). Catalysts were also characterized by means of N adsorption-desorption, XRD, H-TPR, and H-chemisorption. ITQ-6 containing Co (Co/ITQ-6) presented a higher conversion of ethanol and production of hydrogen than ITQ-6 containing Ni (Ni/ITQ-6). The lower size of the metallic cobalt particles shown in Co/ITQ-6 seems to be the major responsible of its higher catalytic performance. Regarding the reaction by-products (CO, CH, CHO and CO), Co/ITQ-6 showed the lowest selectivity at medium and high temperatures (773 and 873 K). At low reaction temperatures (673 K) the dehydrogenation reaction predominates in the Co/ITQ-6, what it is supported by the high concentration of acetaldehyde detected at this temperature. In the case of the Ni/ITQ-6 the main side reaction at 673 K seems to be the methanation reaction since large concentrations of methane are detected. Stability studies were also carried out showing lower deactivation of Co/ITQ-6 at large reaction times (24 h). Characterization of the exhausted catalysts after reaction showed the presence of coke in both catalysts. Nevertheless, Co/ITQ-6 presented the lowest coke deposition. In addition, Co/ITQ-6 exhibited the lowest metal sinterization, what could be also account for the lower deactivation exhibited by this sample. This fact could be related to the higher interaction between the cobalt metallic particles and the ITQ-6 support as the H-TPR studies demonstrate., Funding support by the Spanish Government-MINECO (Project RTI2018-102161-B-I00) is gratefully acknowledged. Thanks to Dr. Urbano Díaz to supply the ITQ-6 delaminated zeolite.