Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 351
Encontrada(s) 4 página(s)

BULERIA. Repositorio Institucional de la Universidad de León
Publicación Capítulo o parte de un libro (BookPart)

The Last Service of a Prelate to his Cathedral. The Impact of Episcopal Wills on the Artistic Development of the Castilian Sees in Late Gothic Times, El último servicio de un prelado a su catedral. Incidencia de los testamentos episcopales del último gótico en el desarrollo artístico de las sedes castellanas

  • Teijeira Pablos, María Dolores
[ES] Los testamentos son un buen reflejo de las inquietudes e intereses de sus titulares que, ante el enfrentamiento con el momento de la muerte, disponen sus bienes materiales para mejor servicio de la salvación de su alma y la permanencia de su memoria. De la gran cantidad de datos de todo tipo que puede proporcionar un testamento, los de carácter artístico son realmente significativos. El presente estudio intenta, a través del análisis de diez testamentos de obispos y arzobispos castellanos del siglo XV, definir el papel que la obra de arte pudo tener para estos religiosos, tanto en vida como en el momento de la muerte, especialmente por lo que pudo suponer para las sedes catedralicias de las diócesis que ostentaron hasta su fallecimiento., [EN] Wills are a good reflection of the concerns and interests of their testators, who, when they are about to face the moment of death, dispose of their personal temporal goods to ensure the salvation of their souls and the permanence of their memories. From the great amount of data supplied by a will, its artistic information is really significant. The present study aims, through the analysis of ten wills made by Castilian bishops and archbishops in the 15th century, to define how important artworks were for these ecclesiastics, both when they were at their prime and when they were facing death, especially regarding the cathedrals of the dioceses they ran until their death., Ministerio de Economía y Competitividad y Fondos Feder
Docta Complutense
Publicación Capítulo o parte de un libro (BookPart)

Devoción y memoria en el arte funerario medieval castellano: una ambigua gramática visual

  • Pérez Monzón, María Olga
En el período tardogótico, la codificación de la memoria se articuló en buena medida a través de los proyectos funerarios. En el presente texto se analizan algunas de esas empresas vinculadas a destacados miembros de órdenes Militares. Su plasmación plástica fue disímil desde sencillas laudas con inscripciones a arcosolios, tumbas exentas o privativas capillas funerarias. También fue diferente su contenido icónico con la plasmación de un lenguaje especular y conceptual (sepulcro de Alonso de Cárdenas), la evocación del relato histórico contemporáneo (sepulcro de Martín Vázquez de Arce) o la "manipulación" del relato biográfico personal (sepulcro de Álvaro de Luna). Tales particularidades, no obstante, forman parte del contexto general de las postrimerías del período medieval donde el artificio, la pluralidad semántica o el lenguaje retórico visual constituyeron un lugar común
Docta Complutense
Publicación Capítulo o parte de un libro (BookPart)

The Influence of Scale in LULC Modeling. A Comparison Between Two Different LULC Maps (SIOSE and CORINE)

  • García Álvarez, David
Scale is one of the most interesting issues in land change science. Although much research has been done on this topic, our understanding of its effects on data and models is still sketchy. We therefore decided to investigate how cartographic scale and minimum mapping unit (MMU) influence modeling results, for which purpose we chose a heterogeneous, dynamic study area in central Asturias (Spain). As opposed to most of the literature on this subject, which focuses on the grain component of scale comparing the same map resampled at different spatial resolutions, we used two different land use and land cover (LULC) maps (SIOSE and CORINE) at different resolutions (12.5 and 50 m) and with minimum mapping units of 0.5–2 and 25 ha respectively. We compared the input and simulated maps using spatial metrics and the matrix proposed by Pontius and Millones to find out the quantity and allocation disagreement. The results can provide a better understanding of the implications of the choice of input maps in LULC modeling.
Docta Complutense
Publicación Capítulo o parte de un libro (BookPart)

Anexo: relación de artículos publicados en la revista La Torre, Annex: list of articles published in La Torre magazine

  • López Vega, Antonio
Este capítulo anexo es un repertorio documental que recoge Autores, Títulos, Número, mes de publicación y año de la misma de la revista La Torre, mientras estuvo dirigida por Jaime Benítez (1953 y 1971).
Docta Complutense
Publicación Capítulo o parte de un libro (BookPart)

La crisis de los soportes laborales: experiencias de vulnerabilidad en el desempleo en mayores de 45 años

  • Briales Canseco, Álvaro
  • Maira Vidal, María Del Mar
Tras enmarcar someramente el sentido general de la vulnerabilidad en el desempleo, y algunos ejes de diferenciación según generación y clase social, nuestro objetivo en esta investigación fue analizar las experiencias de vulnerabilidad y los soportes de personas en desempleo, con la atención puesta no solo en las condiciones estructurales sino inseparablemente en sus posibles singularidades. Para ello, a partir de los extractos de nuestras entrevistas y grupos de discusión, nos centramos en los efectos del desempleo desde los siguientes ejes: la crisis de los soportes de la protección pública, la crisis de la masculinidad ligada al ideal de autosuficiencia, la afectación de los soportes familiares, el eje de las relaciones sociales y de amistad en tanto que mediadas por el consumo y, por último, algunas de sus expresiones en el plano del malestar subjetivo.
Docta Complutense
Publicación Capítulo o parte de un libro (BookPart)

Uncertainty Challenge in Geospatial Analysis: An Approximation from the Land Use Cover Change Modelling Perspective

  • García Álvarez, David
  • Van Delden, Hedwig
  • Camacho Olmedo, María Teresa
  • Paegelow, Martin
All data and geospatial analyses come with uncertainty. Although its importance has been widely recognized, uncertainty issues are still not correctly addressed in most of the current geospatial research. This chapter aims to provide an overview of the concepts, sources and tools to manage the uncertainty in geospatial analysis. To this end, we intend to increase the awareness about the importance of uncertainty for all geospatial data and analyses. Due to time and chapter length considerations, we address this topic from the Land Use Cover Change Modelling perspective.
Docta Complutense
Publicación Capítulo o parte de un libro (BookPart)

Umbrales y ocasos: lo inmaterial, lo fiduciario y lo común en las prácticas artísticas, Thresholds and sunsets: the immaterial, the fiduciary and the common in artistic practices

  • Mateo León, José Enrique
En este capítulo se abordan algunas alteraciones y coincidencias que han tenido lugar en las relaciones entre la economía y la cultura en las primeras décadas del siglo XXI. Para ello se realiza una aproximación a tres elementos discursivos que comparten las siguientes características: 1) participan de las estrategias de las prácticas artísticas contemporáneas; 2) comparten familiaridad con las formas retóricas y funcionales del ámbito de lo económico; y 3) contienen, en distintas dosis, la condición venidera como su principal propiedad -transformadora-. Estos elementos son: lo inmaterial, lo fiduciario y lo común.
Docta Complutense
Publicación Capítulo o parte de un libro (BookPart)

La librería medieval del Monasterio de Guadalupe: un espacio monumental al servicio del saber

  • Fuentes Ortiz, Ángel
La librería de Guadalupe fue uno de los primeros espacios monumentales del saber en castilla dedicado a la custodia de libros. Construida antes que las grandes librerías catedralicias y a semejanza de un espacio de culto, supuso un modelo a imitar por otros destacados edificios de la época. En el presente capítulo se desgrana su fortuna histórica, identificando por primera vez parte de sus funciones (universidad, scriptorium, etc...) , uso y decoración. Además, se localiza en primicia el lugar de ubicación de la primera librería del monasterio de Guadalupe, que había permanecido olvidado durante siglos.
Docta Complutense
Publicación Capítulo o parte de un libro (BookPart)

¿La muerte de qué autor? La cuestión de la “autoría” desde la teoría del valor marxiana, The death of which author? The question of "authorship" in Marxian theory of value

  • Carrión Arias, Rafael
A lo largo de los últimos cuarenta años, el significado del concepto “autor” ha sido objeto de intenso examen. La senda abierta en 1946 por el ensayo de Wimsatt y Beardsley, La falacia intencional, allí donde se afirmaba que “el plan [design] o la intención [intention] del autor no es posible ni deseable como estándar para juzgar el éxito de una obra de arte literario” (468), consumaba de cierta manera una revolución abierta por Friedrich A. Wolf en sus Prolegomena ad Homerum de 1795 cuando el filólogo alemán fundaba el criticismo filológico poniendo en cuestión la unidad de los poemas homéricos desde la afirmación de que son creaciones compuestas por distintos aedos a lo largo de épocas muy distintas y transmitidas de forma oral, refundidas en una redacción escrita solo a partir del s. VI a. C. cuando Pisístrato decidió establecer un texto único y definido. Esta idea, continuada luego por Nietzsche tanto para la filología como para la filosofía (Carrión Arias), fue en último término explorada por Barthes y Foucault en sus célebres ensayos sobre la muerte del autor. Como se sabe, sendos autores rompían de forma definitiva con los principios de la unidad del discurso, inaugurando una nueva era en la crítica literaria basada más en la recepción y la interpretación que en la intencionalidad originaria: para Barthes, el autor se declara muerto desde el momento en que el lector lo asume como suyo y lo emancipa de él; para Foucault, el autor es una especificidad de la categoría de “sujeto” en la modernidad, categoría que solo puede ser examinada desde su naturaleza “fluida” (Nietzsche, Genealogie 314-315; Foucault, Nietzsche). A día de hoy, la emergencia de nuevos medios de autoría compartida (el diseño gráfico, el cine y la televisión, los comic-books, las redes sociales en su interactividad y anonimato, etcétera) y el seísmo todavía por asimilar de la revolución digital (el texto electrónico, el fenómeno de la piratería, etcétera) no han hecho sino confirmar la actualidad de este desafío, poniendo en entredicho la certeza de la autoría mientras las instituciones oficiales se levantan decididas en su defensa.
Docta Complutense
Publicación Capítulo o parte de un libro (BookPart)

Sculpture at the Service of Medicine: The Anatomical Sculptors of the Universitat de Barcelona (c. 1848-1942)

Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

"Tenemos cita Con el arte", educación artística al alcance de personas con Alzheimer y sus cuidadores

  • Ávila Valdés, Noemí|||0000-0002-3895-1691
  • Belver, Manuel H.|||0000-0002-0030-7497
  • Ullán de la Fuente, Ana María
  • Moreno Sáez, María del Carmen|||0000-0002-5191-8714
  • Gutiérrez Párraga, María Teresa
  • Antúnez del Cerro, Noelia|||0000-0003-4561-2572
  • Torres Vega, Sara|||0000-0001-8847-5622
  • Hernández Ullán, Clara
  • Tejedor, Laura
"Tenemos Cita con el Arte", es un programa de visitas al Museo de Prado, al Museo Nacional Centro de Arte Reina Sofía y de talleres de creación plástica en la Facultad de Bellas Artes de la Universidad Complutense de Madrid, para personas con Alzheimer y sus cuidadores. Este programa forma parte del proyecto financiado "Educación artística en museos y otras instituciones culturales como recurso de bienestar para personas con Alzheimer y demencias tempranas" (Ministerio de Educación-EDU2013-43253-R) que tiene como principal objetivo, hacer accesible el arte y la educación artística al colectivo de personas afectadas de Alzheimer y sus cuidadores, ofreciéndoles las posibilidad de participar en un programa cultural y artístico en el que se alternan visitas a museos y talleres de creación plástica en la Facultad de Bellas Artes.
Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

Análisis de la recepción y canonización de las comedias del Siglo de Oro a partir de sus adaptaciones cinematográficas

  • Carmona, Alba|||0000-0002-7486-6160
Esta investigación predoctoral pretende aportar información en dos niveles. El primer apartado versará sobre el proceso de recepción internacional, a través del cine, en la actualidad y a lo largo del siglo pasado, de las obras de autores como Lope de Vega, Calderón de la Barca, Tirso de Molina, Agustín Moreto y Guillén de Castro. Trataré de perfilar cuál es, en expresión de Jauss, el horizonte de expectativas que las transposiciones cinematográficas de la comedia, españolas y extranjeras, han creado en el espectador acerca del teatro del Siglo de Oro. Como ya hizo Wheeler para las adaptaciones nacionales, deberé evaluar hasta qué punto este horizonte de expectativas concuerda con el que se ha desprendido, durante largo tiempo, de la crítica académica. Y es que esta, como ya indicó Arellano, ha contribuido, en ocasiones, a la consolidación de una serie de tópicos y prejuicios que afectan a la recepción del teatro clásico español. En segundo lugar, la tesis quiere determinar cuál es el papel del cine, un factor extraliterario, en el proceso de canonización de las comedias áureas. Como ya señaló Mata Induráin, a partir de la transposición de El perro del hortelano (P. Miró, 1996), se multiplicaron las ediciones y estudios de la pieza lopesca; además, después de su estreno, su presencia en los escenarios también ha sido constante. Es preciso, en consecuencia, comprobar si tal fenómeno se ha producido con el resto de adaptaciones, y valorar qué otros factores pueden haber intervenido en la entrada en el canon de determinadas obras.
Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

Diamond-coated silicon nanowires for enhanced micro-supercapacitor with ionic liquids

  • Gund, Girish S.|||0000-0002-2301-6051
  • Dubal, Deepak P.|||0000-0002-2337-676X
  • Aradilla, David|||0000-0002-8532-0323
  • Mueller-Sebert, Wolfgang
  • Bidan, Gérard
  • Gaboriau, D.
  • Gentile, Pascal|||0000-0002-1547-4247
  • Schubert, Thomas J. S.
  • Wimberg, Jan
  • Sadki, Saïd
  • Gómez-Romero, Pedro|||0000-0002-6208-5340
Silicon nanowires (SiNWs) and diamond-coated SiNWs (D@SiNWs) on highly n-doped silicon wafer substrates were prepared through standard chemical vapor deposition (CVD) method as electrodes for micro-supercapacitors. The surface of electrodes exhibited uniform distribution of SiNWs on silicon wafer and continuous diamond coating on SiNWs. Electrochemical measurements were carried out in order to test the combined effect of using Ionic Liquid electrolytes and diamond coating on SiNWs on energy storage performance. Optimal values of areal capacitance, energy density and power densities were 317 μF cm, 0.13 μWh cm and 150 μW cm, respectively. So, the work reported here confirms the suitability and compatibility of D@SiNWs electrode materials and ionic liquid electrolytes for the fabrication of high-performing and robust micro-supercapacitors.
Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

A pedagogical model of youth empowerment

  • Soler-Masó, Pere|||0000-0002-8636-0925
  • Úcar, Xavier|||0000-0003-3678-8277
This chapter aims to present a pedagogical model of youth empowerment and some tools developed throughout several national research projects to analyze and evaluate it. The research questions at the base of these products connect both with the lack of clarity of the concept itself and with the nonexistence of works that, from the field of social pedagogy, guide social educators to help young people empower themselves. Through three consecutive national research projects (Ref.: DU2010-15122; Ref.: EDU2013-42979-R y Ref.: EDU2017-83249-R) financed by the Ministry of Science, Innovation, and Universities, we have been working on youth empowerment in the framework of what we have called the HEBE Project (https://www.w3.org/1999/xlink" xlink:href="https://www.projectehebe.com">www.projectehebe.com). These projects have sought to answer research questions from the perspective of social pedagogy. The pedagogical model we present provides a map of spaces, moments, and processes that allow for the analysis and pedagogical design of the actions and processes that foster youth empowerment. From this model, we derive a series of dimensions and indicators that allow us to characterize youth empowerment. These dimensions and indicators make it possible to create the HEBE rubric, an instrument for evaluating actions and socio-educational projects for youth empowerment.
Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

La sal de la hospitalidad, The salt of hospitality

  • Oller Guzman, Marta|||0000-0002-1827-7986
Nuestro objetivo es mostrar, mediante el análisis de una selección de textos literarios y alguno epigráfico, el valor representativo de la sal en los rituales de hospitalidad y acogida al foráneo, claramente visible ya en Homero y con una prolongada pervivencia en la tradición posterior. La sal era considerada elemento sagrado y su presencia en los banquetes, signo de civilización. Negar la sal o tirarla sobre la mesa eran acciones propias de personas no sólo inhospitalarias sino impías y malvadas. Se analizan también ejemplos de la evolución posterior, en los que las menciones de la sal no se dan ya en el marco de la hospitalidad privada ligada al οἶκος, sino que se incorporan a las políticas de integración y protección del extranjero en el marco de la πόλις1., The main purpose of this paper is to discuss a collection of literary and some epigraphical texts that highlight the significance of salt in the rituals of hospitality and welcoming foreign guests. Already in Homer, salt is a sacred element and its presence at banquets is considered a sign of civilization and generosity towards guests. On the contrary, deny the salt to one who comes looking for help or even spill the salt on the table are the actions of inhospitable and wicked people. Although initially salt is associated to private hospitality, managed from the οἶκος, later on it is also metaphorically related to the integration and protection policies of foreigners within the πόλις.
Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

Foreigners and the Foreign in some Black Sea Area Epigrams, Towards a Corpus of the Epigrams of the Black Sea Region

  • Nollé, Johannes
  • Oller Guzman, Marta|||0000-0002-1827-7986
The main goal of this paper is to present the project of a new collection of epigrams from the Black Sea area. The late Professor Reinhold Merkelbach, who collected and published the epigrams of Asia Minor, suggested that we should follow his example by bringing together the epigrams of other parts of the Greek world. Therefore, the authors decided to begin by collecting the Pontic epigrams. They started by drawing up an inventory of the poetic texts already known and published. In order to show the interest of these texts in understanding mobility in the Black Sea area, the paper discusses some of these verse-inscriptions which have to do with foreigners. The analysis is focused on the way these people expressed their experience of being strangers or outsiders in a poetic language, the kind of images and poetic phrases they used to introduce their home cities and the foreign places of residence. Another question of interest is if we can detect linguistic differences in the epigrams connected with foreigners, whether dialectical or stylistic, or both., Le but de cet article est de présenter le projet d'une nouvelle collection d'épigrammes de la région de la mer Noire. Feu le professeur Reinhold Merkelbach, qui a compilé et publié les épigrammes de l'Asie Mineure, suggéré que nous devrions suivre son exemple en réunissant les épigrammes d'autres parties du monde grec. Les auteurs ont décidé de commencer par un recueil des épigrammes pontiques. Afin de montrer l'intérêt de ce genre de textes pour comprendre la mobilité dans la région de la mer Noire, ils discutent quelques inscriptions en vers qui ont à voir avec des étrangers. L'analyse se concentre sur la manière dont ces personnes ont exprimé leur expérience d'être un étranger dans une langue poétique, quel genre d'images et quelles phrases poétiques ils ont utilisé pour présenter leur ville d'origine et leur lieu de résidence à l'étranger. Une autre question examinée est de savoir si nous pouvons identifier des différences linguistiques dialectales et stylistiques dans les épigrammes en rapport avec des étrangers., Hauptziel dieses Beitrags ist es, das Forschungsvorhaben einer neuen Sammlung der griechischen Epigramme aus dem Schwarzmeerraum vorzustellen. Professor Reinhold Merkelbach regte noch kurz vor seinem Tod an, dass wir seinem Beispiel folgen und weitere Sammlungen von epigraphischen Texten griechischer Poesie in Angriff nehmen sollten. Seiner Anregung folgend haben wir uns entschlossen, im Rahmen dieses Projektes mit den Epigrammen der Schwarzmeerregion zu beginnen. Ein erster Arbeitsschritt bestand darin, ein Sammelbuch all jener epigraphisch überlieferten poetischen Texte anzulegen, die bereits bekannt und publiziert sind. Um aufzuzeigen, dass die Epigramme aus diesem Raum sowohl von Interesse als auch von Bedeutung für das Verständnis von Mobilität in dieser Region sein können, gehen wir auf einige Epigramme, die Fremde oder Fremdes thematisieren, detaillierter ein. Die vorgelegten Beispiele zeigen auf, wie Menschen ihr Fremdsein oder eine Außenseiterposition in poetischer Sprache zum Ausdruck bringen. Dabei geht es vor allem darum, welcher Bilder und welcher Formulierungen sie sich bedienen, um ihre ursprünglichen wie auch neuen Heimatstädte zu beschreiben. Eine weitere Frage ist, ob die Epigramme, in denen es um Fremde geht, stilistische oder sprachliche Unterschiede zu den übrigen Epigrammen aus diesem Raum aufweisen.
Dipòsit Digital de Documents de la UAB
Publicación Capítulo o parte de un libro (BookPart)

La inversión china en espacios económicos maduros. El Distrito Textil de Trafalgar en Barcelona, 1990-2019

  • Vicente Salar, Rafael|||0000-0003-1792-355X
  • Pallares-Barbera, Montserrat|||0000-0002-1595-3248
RIUMA. Repositorio Institucional de la Universidad de Málaga
Publicación Capítulo o parte de un libro (BookPart)

Reescritura y traducción de los clásicos medievales ingleses en Argentina: Patricio Gannon y 'The Pardoner's Tale' de Geoffrey Chaucer

  • Ramírez-Arlandi, Juan
Permiso para publicación versión "preprint" por parte de la Editorial Comares., Este capítulo aborda el estudio de la traducción de Patricio Gannon, publicada en 1944 por la editorial bonaerense Emecé, titulada 'El cuento del perdonador', del relato original 'The Pardoner’s Tale', incluido en el clásico medieval inglés The Canterbury Tales de Geoffrey Chaucer. Según Gannon, su versión es una traducción del “arreglo en forma de cuento” que, por su parte, John S. P. Tatlock y Percy MacKaye habían reescrito en inglés modernizado en 1912 a partir de la edición del original chauceriano, editada por Walter W. Skeat a finales del siglo XIX. Con el propósito de establecer las relaciones entre tales textos, este trabajo se centra en el análisis del binomio reescritura y traducción, de la trayectoria de Gannon y del contexto literario-editorial de Argentina, y concluye con un análisis textual de orientación normo-descriptiva.
Repositorio Digital de la UPF
Publicación Capítulo o parte de un libro (BookPart)

Iterated local search: framework and applications

  • Ramalhinho-Lourenço, Helena
  • Martin, Olivier C.
  • Stützle, Thomas
The key idea underlying iterated local search is to focus the search not on the full space of all candidate solutions but on the solutions that are returned by some underlying algorithm, typically a local search heuristic. The resulting search behavior can be characterized as iteratively building a chain of solutions of this embedded algorithm. The result is also a conceptually simple metaheuristic that nevertheless has led to state-of-the-art algorithms for many computationally hard problems. In fact, very good performance is often already obtained by rather straightforward implementations of the metaheuristic. In addition, the modular architecture of iterated local search makes it very suitable for an algorithm engineering approach where, progressively, the algorithm’s performance can be further optimized. Our purpose here is to give an accessible description of the underlying principles of iterated local search and a discussion of the main aspects that need to be taken into account for a successful application of it. In addition, we review the most important applications of this method and discuss its relationship with other metaheuristics., Helena Ramalhinho Lourenço acknowledges support from the Spanish Ministry of Economy and Competitiveness (TRA2013-48180-C3-P, TRA2015-71883-REDT), and Thomas Stützle acknowledges support from the F.R.S.-FNRS, of which he is a research director. This work received support from the COMEX project P7/36 within the Interuniversity Attraction Poles Programme of the Belgian Science Policy Office.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Implementación de mecanismos de mitigación de tormentas de broadcast en redes de área local mediante Redes Definidas por Software

  • Valera Muros, Bárbara
  • Prados Garzón, Jonathan
  • Ramos-Munoz, Juan J.
  • Navarro-Ortiz, Jorge
[ES] El uso de Ethernet como tecnologı́a de red pararedes corporativas se justifica por su bajo coste y facilidadde configuración y mantenimiento. Sin embargo, estas redesno son muy escalables, debido en parte a las inundacioneso tormentas de broadcasts, que afectan al rendimiento tantode los dispositivos de red como finales. Para mitigar elimpacto de las inundaciones por broadcast, se ha previstoutilizar técnicas de filtrado y caché en distintos nodos dela red. Sin embargo, el paradigma de Redes Definidas porSoftware permite definir nuevas aproximaciones, gracias ala capacidad de reprogramar la red de forma centralizaday flexible que proporciona. En este trabajo se aborda laimplementación de una red de área local con soporte parafiltrar algunos paquetes broadcast mediante la utilizaciónde Redes Definidas por Software. Esta solución permitirı́adesplegar redes de área local más amplias, adecuadas paralos requisitos de redes corporativas. Para ello, se describe eldesarrollo de filtros para varios protocolos de red, su imple-mentación en el controlador OpendayLight, y la evaluacióndel rendimiento obtenido., Este trabajo esta parcialmente financiado por el Ministerio de Economía, Industria y Competitividad y el Fondo Europeo de Desarrollo Regional FEDER (proyectos TEC2016-76795-C6-4-R y TIN2013-46223-P).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Towards Integrating Mechanisms to Assess Students&apos, Off-site Work within the Regular Teaching-Learning Process

  • de-Andrés-Martínez, David|||0000-0002-4744-3795
  • Ruiz, Juan Carlos|||0000-0001-7678-3513
  • Antonino Daviu, Eva|||0000-0002-0163-4561
  • Palomares Chust, Alberto|||0000-0002-4583-467X
  • Gisbert, Carmina|||0000-0002-4620-1065
  • Peña Cerdán, Antonio|||0000-0002-5859-3860
  • Ballester Server, José Vicente
  • Villavieja Llorente, Carlos
[EN] The deployment of the Bologna process has caused a shift in the education paradigm of university studies. In this new education model, personal study is a crucial part of the learning process. However, in most cases, the personal (off-site) work performed by students is just evaluated by means of assignments, in the form of reports or deliverables. They could surely provide evidences of the degree of achievement of certain learning outcomes, but can hardly provide insights on how students have organised and coordinated (especially in a group work) to hand over the assignment, on the time devoted to perform the task, on the perception of the students about the usefulness of the task, etc. Accordingly, the Tools and Strategies for Competences Assessment (TASCA) Innovation and Quality Education Team (EICE) from the Universitat Politècnica de València (UPV) has focused its initial efforts on gathering and analysing different information related to the personal study/off-site work carried out by students. Preliminary results show that there is not a clear relationship between the time devoted to each task and the obtained results, but there exist a number of students that devote a large amount of time to the task and get poor marks. If this feedback is obtained early during the course, the teacher can tutor those students to determine their specific problems and propose corrective actions. Another important aspect in the student s learning process is that, in general, the ratio between the number of on-site work (lectures, seminars, and labs) hours and off-site work (personal study, assignments, etc.) hours must be well balanced. At UPV, for instance, this ratio should be of 1.5 offsite work hours per each on-site work hour. However, the lack of adequate supervision of off-site work leads to situations where such time is underestimated or overestimated. While overestimation leads to a waste of time, underestimation of off-site work leads to overload, which may burn-out the student. Supervision of student s off-site work is thus an essential asset for the adequate tune of courses. Coordination among different courses and departments could also be of prime importance to distribute exams and assignments along the course, avoiding workload peaks in specific periods of time. Finally, an estimation of the degree of usefulness and satisfaction from students perspective may help teachers to improve the assignments of their courses to raise students motivation. Hence, the integration of mechanisms within the regular teaching-learning process to measure and assess the offsite work performed by students, not just its quality, but also the time required to fulfil the task, and the perceive usefulness and satisfaction, among other parameters, may provide a very interesting feedback to stimulate reflective and analytic thinking about the work one, increase students motivation, and improve the organisation and planning of course in general., This work has been partially sponsored by UPV’s project PIME 008-A-2013.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Estudio de la velocidad desarrollada por vehículos pesados en carreteras convencionales

  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • Llopis-Castelló, David|||0000-0002-9228-5407
  • García García, Alfredo|||0000-0003-1345-3685
[ES] La velocidad de operación, definida como el percentil 85 de la distribución de velocidad de vehículos ligeros circulando en carreteras convencionales en condiciones de flujo libre, es una de las principales variables en la evaluación de la consistencia del diseño geométrico. De esta forma, los únicos vehículos considerados en el análisis son los vehículos ligeros, obviando la influencia de los vehículos pesados. Para la estimación de la velocidad de operación de estos vehículos el número de modelos existentes es mínimo. Por ello, el objetivo del trabajo que se presenta es el estudio experimental de la velocidad desarrollada por vehículos pesados en carreteras convencionales. El estudio no se centra únicamente en la velocidad de operación, sino en el estudio de la distribución completa de la velocidad, ya que los percentiles bajos están relacionados con el riesgo de alcance de vehículos ligeros. Se han analizado las diferentes variables que pueden influir con especial énfasis en las variables geométricas de la carretera. El estudio se ha basado en los datos obtenidos gracias a la colaboración de dos empresas, que han permitido la colocación de dispositivos GPS de 1 Hz en vehículos de su flota. Los GPS registraron de forma continua la velocidad desarrollada por los vehículos durante la realización de su ruta habitual. La influencia sobre el comportamiento de los conductores fue mínima al tratarse de un dispositivo de pequeño tamaño ubicado en el exterior del vehículo. Tras la restitución de la geometría de las carreteras objeto de estudio y el tratamiento de los datos de velocidad registrados, se analizó la influencia de las variables geométricas del trazado, especialmente en cuanto a alzado se refiere, en la velocidad. Se ha concluido que la pendiente no tiene una influencia significativa en la elección de la velocidad por parte de los conductores de vehículos pesados en curvas de carreteras convencionales, donde el principal control de la velocidad son los radios de las propias curvas., El estudio que se ha presentado es parte del proyecto de investigación “CASEFU – Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales” (TRA2013- 42578-P), subvencionado por el Ministerio de Economía y Competitividad y el Fondo Social Europeo. Asimismo, los autores quieren agradecer a las empresas SAV y SAEVI, así como la Entidad Metropolitana para el Tratamiento de Residuos en Valencia, por su colaboración totalmente desinteresada en toma de datos.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Influencia de las condiciones de curado en las propiedades a edades tempranas de hormigones autocompactantes con filler calizo, microsílice y nanosílice

  • Barluenga Badiola, Gonzalo
  • Guardia Martín, Cynthia
  • Puentes Mojica, Javier
[ES] La mayor cantidad de pasta requerida para conseguir una mezcla autocompacta, que implica el uso de gran cantidad de material de tamaño de partícula reducida, hace que los hormigones autocompactables (HAC) sean propensos a sufrir problemas derivados de unas condiciones de curado adversas. El presente trabajo evalúa los resultados experimentales del efecto de diferentes combinaciones de temperatura y humedad relativa durante las edades tempranas (primeras 24 horas) sobre la evolución de la microestructura del HAC y sus propiedades una vez endurecido. Se ha comparado el comportamiento de HAC con filler calizo y microsílice y nanosílice en cámara climática sometidos a tres temperaturas (10, 20 y 30 ºC) y dos humedades relativas (40 y 80 %). Las muestras se han monitorizado midiendo su temperatura, presión capilar, evaporación, retracción y la velocidad de transmisión de ondas de ultrasonidos de compresión y cortante. La combinación de estas medidas permite analizar el proceso de formación de la microestructura sólida y de la red porosa del material y el desarrollo de sus incipientes propiedades mecánicas. La temperatura afecta a la velocidad de fraguado y acelera el proceso de endurecimiento, aumentando la retracción a edades tempranas y la HR aumenta la evaporación y la retracción a edades tempranas y la porosidad y el módulo dinámico en estado endurecido., Los autores agradecen a I. Palomar y M. Giménez su contribución en la realización de las mezclas, el suministro de materiales a BASF Construction Chemicals España S.L, Omya Clariana SL y Cementos Portland Valderrivas y la financiación a la Junta de Comunidades de Castilla La Mancha (PII-2014-022-P) (cofinanciado por el Fondo Social Europeo) y al Ministerio Español de Economía y Competitividad (proyectos BIA2013-48480-C2-2-R y BIA2016-77911-R)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Developing Adaptive Agents Situated in Intelligent Virtual Environments

  • Rincón Arango, Jaime Andrés
  • Garcia Marques, Mª Emilia
  • Julian, Vicente|||0000-0002-2743-6037
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
This paper presents a framework specially designed for the execution and adaptation of Intelligent Virtual Environments. This framework, called JACALIVE, facilitates the development of this kind of environments managing in an efficient and realistic way the evolution of parameters for the adaptation of the physical world. The framework includes a design method and a physical simulator which is in charge of giving the Intelligent Virtual Environment the look of the real or physical world, allowing to simulate physical phenomena such as gravity or collision detection. The paper also includes a case study which illustrates the use of the proposed framework., This work is partially supported by the TIN2009-13839-C03-01, TIN2011-27652-003-01, CSD2007-00022, COST Action 100801, FP7-294931 and the FPI grant AP2013-01276 awarded to Jaime-Andres Rincon.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

ANÁLISIS DE LA LONGITUD DE LAS RECTAS Y SU INFLUENCIA EN LA CONSISTENCIA DEL DISEÑO GEOMÉTRICO DE CARRETERAS CONVENCIONALES

  • García García, Alfredo|||0000-0003-1345-3685
  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • Díaz García, Jaime Sebastián
[ES] Los trazados que presentan rectas de elevada longitud fomentan que los conductores circulen a mayores velocidades, pudiendo alcanzar sus velocidades deseadas en la parte central de las mismas. Como consecuencia de ello, son grandes las reducciones de velocidad para afrontar las curvas posteriores. En cambio, con rectas cortas, las velocidades que se pueden desarrollar en las dos curvas de los extremos están condicionadas mutuamente para que no haya una reducción excesiva de la velocidad. Las reducciones excesivas de velocidad comprometen la adecuada consistencia de una carretera por lo que están correlacionadas con una mayor siniestralidad. La mayoría de modelos de velocidad de operación existentes han sido calibrados a partir de mediciones puntuales de velocidad. Para estimar los perfiles de velocidad de operación, se hace necesario incorporar unas reglas de construcción. La gran mayoría de ellas considera que los cambios de velocidad se producen solo a lo largo de la recta. En la investigación que se presenta, se ha analizado el comportamiento operacional de un gran número de conductores en las rectas, encontrando importantes diferencias respecto del comportamiento anterior. Analizando la evolución de la velocidad de operación observada en 70 secciones curva-recta-curva de carreteras convencionales se ha encontrado que la variación de velocidad se produce en una longitud superior a la propia recta; esa nueva longitud efectiva está conformada por la longitud de la recta más un cierto desarrollo de las curvas adyacentes. Los resultados apuntan a que la longitud empleada para variar la velocidad antes y después de las rectas es de unos 145 m, independientemente de la configuración geométrica. Adicionalmente, se han comparado los resultados del análisis geométrico y operacional de las secciones con los criterios correspondientes de la nueva Instrucción de Trazado de Carreteras, encontrando disparidades manifiestas y planteándose mejoras a la misma, siendo el punto de mayor discrepancia las reducidas longitudes que esta emplea para considerar algunas rectas como no independientes. Se han encontrado tres niveles de independencia de las rectas a diferencia de los dos niveles tradicionalmente empleados a nivel internacional., El desarrollo de esta investigación se enmarca dentro del proyecto “CASEFU – Estudio Experimental de la Funcionalidad y Seguridad de las Carreteras Convencionales”, con referencia TRA2013-42578-P, subvencionado por el Ministerio de Economía y Competitividad. Asimismo, la toma de datos continuos de velocidad en la que está basada este proyecto se llevó a cabo dentro del proyecto “REVEL – Una Metodología para la Revisión de los Límites de Velocidad”, de referencia PT-2006-031-25 IAPP, gracias a la subvención parcial recibida del Centro de Estudios y Experimentación de Obras Públicas (Ministerio de Fomento).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Stochastic tasks: difficulty and Levin search

  • Hernández-Orallo, José|||0000-0001-9746-7632
We establish a setting for asynchronous stochastic tasks that account for episodes, rewards and responses, and, most especially, the computational complexity of the algorithm behind an agent solving a task. This is used to determine the difficulty of a task as the (logarithm of the) number of computational steps required to acquire an acceptable policy for the task, which includes the exploration of policies and their verification. We also analyse instance difficulty, task compositions and decompositions., This work has been partially supported by the EU (FEDER) and the Spanish MINECO under grants TIN 2010-21062-C02-02, PCIN-2013-037 and TIN 2013-45732-C4-1-P, and by Generalitat Valenciana PROMETEOII 2015/013.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

GPU implementation of Krylov solvers for block-tridiagonal eigenvalue problems

  • Lamas Daviña, Alejandro
  • Jose E. Roman|||0000-0003-1144-6772
In an eigenvalue problem defined by one or two matrices with block-tridiagonal structure, if only a few eigenpairs are required it is interesting to consider iterative methods based on Krylov subspaces, even if matrix blocks are dense. In this context, using the GPU for the associated dense linear algebra may provide high performance. We analyze this in an implementation done in the context of SLEPc, the Scalable Library for Eigenvalue Problem Computations. In the case of a generalized eigenproblem or when interior eigenvalues are computed with shift-and-invert, the main computational kernel is the solution of linear systems with a block-tridiagonal matrix. We explore possible implementations of this operation on the GPU, including a block cyclic reduction algorithm., This work was partially supported by the Spanish Ministry of Economy and Competitiveness under grant TIN2013-41049-P. Alejandro Lamas was supported by the Spanish Ministry of Education, Culture and Sport through grant FPU13-06655.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Utilización de las series de animación como recurso didáctico en la elaboración de casos. Análisis de una experiencia en la innovación docente en la Universitat Politècnica de València

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
  • Cabedo Mallol, Vicente|||0000-0001-5248-5220
  • Casar Furió, María Emilia|||0000-0001-5910-8815
  • Gimenez-Chornet, Vicent|||0000-0003-1183-9058
  • Oltra Gutiérrez, Juan Vicente|||0000-0002-7765-1085
[EN] In the present work there is analyzed the utilization of series of animation for the design of practical cases and the results obtained in the educational area after the concession of a project of educational innovation (PIME) on the part of Universitat Politècnica de València , for the year 2015. The obtained results demonstrate the acceptance on the part of the pupil and the reflection of juridical questions applied to the reality, as well as that allows us the application of the transverse competition CT-06. Teamwork and leadership, with the exhibitions in the classroom of the different practical elaborated cases. With it we think that the comprehension of concepts is improved substantially by the utilization of cartoon and description of situations in series as the Simpsons, known by all, and that facilitate the application of the legislation in the raised conflicts., [ES] En el presente trabajo se analiza la utilización de series de animación para el diseño de casos prácticos y los resultados obtenidos en el ámbito docente tras la concesión de un proyecto de innovación docente (PIME) por parte de la Universitat Politècnica de València, para el año 2015.Los resultados obtenidos demuestran la aceptación por parte del alumno y la reflexión de cuestiones jurídicas aplicadas a la realidad, así como que nos permite la aplicación de la competencia transversal CT-06. Trabajo en equipo y liderazgo, con las exposiciones en el aula de los distintos casos prácticos elaborados.Con ello consideramos que se mejora sustancialmente la comprensión de conceptos con la utilización de dibujos animados y descripción de situaciones en series como los Simpsons, conocidas por todos, y que facilitan la aplicación de la legislación en los conflictos planteados., Trabajo realizado en el marco del PIME «Utilización de las series de animación como recurso didáctico en la elaboración de casos» de la Universitat Politècnica de València, 2015-2016; Proyecto MINECO (DER2012-37844) siendo el Investigador Principal el Dr. D. Lorenzo Cotino Hueso, Catedrático acreditado de Derecho constitucional, Universitat de València-Estudi General, del Proyecto MINECO (DER2013-4256R), siendo los Investigadores Principales la Dra. Dª. Luz María Martínez Velencoso, Profesora Titular de Derecho civil, Universitat de València-Estudi General, y el Dr. D. Javier Plaza Penadés, Catedrático de Derecho civil, Universitat de València-Estudi General, y Proyecto «Derecho civil valenciano y europeo» del Programa Prometeo para Grupos de Investigación de Excelencia de la Conselleria de Educación, Cultura y Deporte, GVPROMETEOII2015-014 y del Microcluster «Estudios de Derecho y empresa sobre TICs (Law and business studies on ICT)», dentro del VLC/Campus, Campus de Excelencia Internacional (International Campus of Excellence), coordinado por el Dr. D. Javier Plaza Penadés, Catedrático de Derecho civil, Universitat de València-Estudi General, y Proyecto I+D Excelencia del Ministerio y Competitividad. “El avance del Gobierno Abierto. Régimen jurídico constitucional de la implantación de políticas de transparencia, acceso a la información, datos abiertos, colaboración y participación especialmente a través de las TIC y del Gobierno electrónico”. DER2015-65810-P (2016-2018). Investigador Principal: Dr. D. Lorenzo Cotino Hueso. Catedrático acreditado de Derecho constitucional. Universitat de València
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Towards smart open dynamic fleets

  • Billhardt, Holger
  • Fernández, Alberto
  • Lujak, Marin
  • Ossowski, Sascha
  • Paz, Juan F. De
  • Hernández, Josefa Z.
  • Julian, Vicente|||0000-0002-2743-6037
Nowadays, vehicles of modern fleets are endowed with advanced devices that allow the operators of a control center to have global knowledge about fleet status, including existing incidents. Fleet management systems support real-time decision making at the control center so as to maximize fleet perform‐ ance. In this paper, setting out from our experience in dynamic coordination of fleet management systems, we focus on fleets that are open, dynamic and highly autonomous. Furthermore, we propose how to cope with the scalability problem as the number of vehicles grows. We present our proposed architecture for open fleet management systems and use the case of taxi services as example of our proposal., Work partially supported by Spanish Government through the projects iHAS (grant TIN2012-36586-C03) and SURF (grant TIN2015-65515-C4-X-R), the Autonomous Region of Madrid through grant S2013/ICE-3019 (“MOSI-AGIL-CM”, cofunded by EU Structural Funds FSE and FEDER) and URJC-Santander (30VCPIGI15).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Corrección Semi-Automática de Programas Java

  • Insa Cabrera, David
  • Silva, Josep|||0000-0001-5096-0008
[ES] La evaluación es una parte fundamental de la enseñanza. Permite tanto a los estudiantes como a los profesores medir el grado de éxito obtenido en el proceso de aprendizaje. De hecho, la evaluación no debería usarse solo para puntuar, sino que debe ser parte integral de la educación, y proporcionar a los alumnos retroalimentación inmediata. Obviamente, la evaluación debe ser objetiva y justa, y tratar a todos los alumnos por igual. Esto ocurre, p.e., en exámenes de respuesta múltiple, pero, desafortunadamente, no está asegurado en la evaluación de código programado por alumnos, puesto que su corrección es todavía un proceso manual y propenso a errores e interpretaciones. En este artículo proponemos un sistema semi-automático de evaluación de código que utiliza técnicas de caja negra (basadas en output-comparison) y técnicas de caja blanca (que observan las propiedades internas del código). El método propuesto incluye nuevas ideas y técnicas que le permiten evaluar incluso código que no compila., Proyecto financiado por EU (FEDER) y el Ministerio de Econom´ıa y Competitividad (TIN2013- 44742-C4-1-R), por la Generalitat Valenciana (PROMETEO-II/2015/013), y por la Universitat Polit`ecnica de Val`encia (PIME B16). Los autores agradecen el respaldo de la acci´on COST IC1405.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Monitoring embankment dams from space using satellite radar interferometry: Case studies from RemoDams project

  • Ruiz-Armenteros, Antonio
  • Delgado-Blasco, José Manuel
  • Bakon, Matus
  • Lamas-Fernández, Francisco
  • Marchamalo-Sacristán, Miguel
  • Gil-Cruz, Antonio
  • Papco, Juraj
  • González-Rodrigo, Beatriz
  • Lazecky, Milan
  • Perissin, Daniele
  • Sousa, Joaquim J.
  • Sousa, Joaquim
[EN] The monitoring procedures with different geotechnical/structural sensors and classical geodetic techniques including GNSS are the usual practices in most of the dams where these controls are established. Other geomatic techniques such as TLS, GB-SAR and multi-temporal InSAR (MT-InSAR), allow the determination of 3D displacements with the advantage of covering a large number of control points. In particular, MT-InSAR techniques enable the detection of displacements at a very low cost compared to other techniques, and without the need for field work or the installation of special equipment. In addition, they can provide a single source of information on the stability of the dam when monitoring programs are not carried out due to lack of funding, resources or other reasons. These techniques provide measurement uncertainties of the order of 1 mm/year, interpreting time series of interferometric phases of coherent reflectors present in the area, called Persistent Scatterers. In this work, we present the adaptation and application of MT-InSAR techniques to monitor embankment dams, obtaining vertical displacements, characterizing their consolidation rates, and allowing the identification of potential problems surrounding the reservoir that require further field investigation. This study is part of the ReMoDams project, a Spanish research initiative developed for monitoring dam structural stability from space using satellite radar interferometry., ERS-1/2 and Envisat data sets were provided by the European Space Agency (ESA). Sentinel-1A/B data were freely provided by ESA through Copernicus Programme. Data have been processed by DORIS (TUDelft), StaMPS (Andy Hooper), SARPROZ (Copyright (c) 2009-2020 Daniele Perissin), and SNAP (ESA). The satellite orbits are from TUDelft and ESA, as well as from the ESA Quality control Group of Sentinel-1. Research was supported by: (a) ESA Research and Service Support for providing hardware resources employed in this work, (b) ReMoDams project ESP2017-89344-R (AEI/FEDER,UE) from Spanish Ministry of Economy, Industry and Competitiveness, POAIUJA-2021/2022 and CEACTEMA from University of Jaén (Spain), and RNM-282 research group from the Junta de Andalucía (Spain), (c) ERDF through the Operational Programme for Competitiveness and Internationalisation - COMPETE 2020 Programme within project «POCI-01-0145-FEDER-006961», and by National Funds through the FCT – Fundação para a Ciência e a Tecnologia (Portuguese Foundation for Science and Technology) as part of project UID/EEA/50014/2013, (d) The Ministry of Education, Youth and Sports from the National Programme of Sustainability (NPU II) project «IT4Innovations excellence in science - LQ1602» (Czech Republic), and (e) Slovak Grant Agency VEGA under projects No. 2/0100/20
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Determination of Heat and Flow Characteristics in Spray Cooling with Rectangular Finned Heat Sink

  • Karabey, Altuğ
  • Yakut, Kenan
[EN] Spray cooling process has many parameters such as extended surface, angle of inclination, effect of gravity, diameter of nozzle, angle of spray, mass flux, geometry of cooled surface, thermal performance and critical heat flux of spray etc. Many effective parameters to carry out the experiments with conventional test methods are both expensive and time consuming. As a solution in these circumstances, Taguchi method, which is one of the modern experimental design and optimization methods and very effective in solving such problems, was used in this study. Taguchi method, as well as being in effective to improve the quality of products, also gives the opportunity to achieve better results with much less experiment. Using Taguchi method, as well as to reach the target value exactly, the sensitivity of the design against uncontrollable factors is reduced to a minimum. Thus, the optimum tolerance range in cost and quality factors is determined. When compared to conventional experimental design methods, Taguchi method has many advantages. In these experiments with using rectangular pin fin heat sinks, the effects of the longitudinal and lateral distances of the consecutively arranged nozzle or diffuser-like fin pairs, widths of the fins, angle of fins, heights of fins, spraying time, air flow rate, liquid flow rate (ALR, the ratio of air-liquid flow rate) and the ratio of the nozzle-heat sink distance to the nozzle diameter (h/d) on heat and flow characteristics have been investigated by using Taguchi experimental design method. For this reason, characteristics of flow and heat transfer are considered separately. Nusselt number considered as performance statistic, L27(311) orthogonal array has been selected as an experimental design plan for the eleven parameters mentioned above. The Nusselt number was calculated by taking into account the characteristic length of heat sink and the optimized results were found to be fin width of 45 mm, fin angle of 45o , fin height of 15 mm, x direction distance between fins of 20 mm, y direction distance between fins of 20 mm, x direction distance between slices of 15 mm, y direction distances between slices of 20 mm, air flow rate of 10-3 m 3 /s, liquid flow rate of 5,83*10-6 m3 /s, spraying time of 5 s and the ratio of the nozzle-heat sink distance to the nozzle diameter (h/d) of 667., This research was supported as project (BAP-2013/103) of the Research Fund of Ataturk University.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Influencia de la fracción mixta y de hormigón en las prestaciones mecánicas de los hormigones reciclados

  • Medina, C.
  • Plaza, P.
  • Velardo, P.
  • Matías, A.
  • Sánchez de Rojas, M.I.
  • Sáez del Bosque, I.F.
[ES] La utilización de áridos reciclados en el ámbito de la ingeniería civil ha incrementado en los últimos años, representando en 2014 un 8% de la producción total de áridos a nivel europeo. La actual Instrucción Española de Hormigón Estructural (EHE-08) permite la incorporación parcial (< 20% peso) de áridos reciclados gruesos de hormigón como sustitutos de los áridos convencionales. El presente trabajo de investigación persigue analizar el efecto de utilizar simultáneamente la incorporación parcial (50%) de arena reciclada (hormigón o mixta) con árido grueso reciclado de hormigón (50%) en las prestaciones finales de los hormigones reciclados con fines estructurales. Para alcanzar este ítem, se caracterizó primeramente los áridos empleados, para posteriormente proceder al diseño y fabricación de las mezclas objeto de estudio. A continuación, se llevó a cabo la caracterización física (densidad y consistencia) y mecánicas (compresión, tracción y flexión) de los nuevos hormigones. Resultado de este estudio se observa que la incorporación de la fracción fina y gruesa reciclada no afecta nocivamente en las prestaciones finales de los mismos pudiendo ser empleados en el sector de la construcción y contribuyendo al actual modelo de economía circular., Este estudio ha sido realizado gracias a la financiación de los proyectos de investigación BIA 2013-48876-C3-1-R, BIA 2013-48876-C3-2-R y BIA2016-76643-C3-1-R concedidos por el Ministerio de Ciencias e Innovación, así como por la ayuda GR-15064 concedida al grupo de investigación MATERIA por parte de la Junta de Extremadura y el Fondo Europeo de Desarrollo Regional – FEDER.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Towards Symbolic Execution in Erlang

  • Vidal, Germán|||0000-0002-1857-6951
The concurrent functional language Erlang [1] has a number of distinguishing features, like dynamic typing, concurrency via asynchronous message passing or hot code loading, that make it especially appropriate for distributed, faulttolerant, soft real-time applications. The success of Erlang is witnessed by the increasing number of its industrial applications. For instance, Erlang has been used to implement Facebook’s chat back-end, the mobile application Whatsapp or Twitterfall—a service to view trends and patterns from Twitter—, to name a few. The success of the language, however, also requires the development of powerful testing and verification techniques. Symbolic execution is at the core of many program analysis and transformation techniques, like partial evaluation, test-case generation or model checking. In this paper, we introduce a symbolic execution technique for Erlang. We discuss how both an overapproximation and an underapproximation of the concrete semantics can be obtained. We illustrate our approach through some examples. To the best of our knowledge, this is the first attempt to formalize symbolic execution in the context of this language, where previous approaches have only considered exploring different schedulings but have not dealt with symbolic data. More details can be found in the companion technical report, This work has been partially supported by the Spanish Ministerio de Economía y Competitividad (Secretaría de Estado de Investigación, Desarrollo e Innovación) under grant TIN2013-44742-C4-1-R and by the Generalitat Valenciana under grant PROMETEO/2011/052.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Audiovisual Tool for understanding Audio concepts for being used in bachelor’s degree programmes

  • Antoñanzas Manuel, Christian
  • Belloch, Jose A.
  • Gutiérrez-Parera, Pablo|||0000-0002-5349-5698
  • Simarro, M. Angeles|||0000-0001-6238-2532
[EN] In the Audio Signal Processing field, there exists difficulties in order to explain different concepts such as, compression, masking, quantization, sampling, among others. Further, most of these concepts require the use of audio laboratories and multiple practical session that must carry out students. Another issue is that there are students that are not able to internalize these concepts straightforwardly and require more practical sessions. In order to address these problems, we have developed an audiovisual tool, designed with Matlab, that can be used for professors and students. This tool allows to analyze, test and apply the audio concepts to real audio signals. The developed tool has been successfully experienced by professors of the audio signal processing field that recommend its use in upcoming academic courses., This research has been partly funded by TIN2014-53495-R, BES-2013-063783, BES-2013- 065034, TEC2013-47141-C4-4-R and FPU AP-2012/71274.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Heat Kit: Creación de un prototipo para `tocar´ el calor

  • Martín Gómez, César
  • Ibañez Puy, Elia
  • Zuazua Ros, Amaia
[EN] The understanding of heat transfer processes and its affection in buildings is one of the difficulties that the students of architecture have to face when receiving building services courses knowledge, specifically in those related to hygrothermal conditioning. In a simplified form, it can be said that they must internalise the existence of a heat source, a machine that transfers the heat and an element that absorbs or dissipates the heat in the rooms. The traditional solution of master classes, visits to real facilities… had a demonstrated effectiveness in the past, however, they fail transferring the implications of thermodynamics in their complexity. The teaching innovation project entitled "Heatkit – Creation of a prototype to 'touch' the heat", which is the origin of these text, expects that the students of architecture can feel the heat transfer with the construction of a simple and easily replicable thermoelectric prototype., [ES] Una de las dificultades de los alumnos de Arquitectura en las asignaturas de instalaciones y concretamente en las que reciben conocimientos de acondicionamiento higrotérmico, es comprender los procesos de transferencia de calor y sus afecciones en el edificio. De forma simplificada, puede decirse que deben interiorizar que existe una fuente de energía, una máquina que transfiere el calor y un elemento que toma calor, o lo cede, en los locales. Las soluciones tradicionales de clases magistrales, visitas a instalaciones reales…han demostrado su efectividad en el pasado, sin embargo, no consiguen trasladar en su complejidad las implicaciones de la termodinámica. Lo que pretende el proyecto de innovación docente titulado ”Heatkit - Creación de un prototipo para ‘tocar' el calor”, origen de este texto, es que los alumnos de Arquitectura, puedan sentir la transferencia de calor con la creación de un prototipo termoeléctrico sencillo y fácilmente replicable., Queremos agradecer el apoyo provisto por el proyecto BIA2013-46463- del Ministerio de Ciencia e Innovación del Gobierno de España y el proyecto 0011-1365-2016-000289 del Gobierno de Navarra.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Concolic Execution and Test Case Generation in Prolog

  • Vidal, Germán|||0000-0002-1857-6951
Symbolic execution extends concrete execution by allowing symbolic input data and then exploring all feasible execution paths. It has been defined and used in the context of many different programming languages and paradigms. A symbolic execution engine is at the heart of many program analysis and transformation techniques, like partial evaluation, test case generation or model checking, to name a few. Despite its relevance, traditional symbolic execution also suffers from several drawbacks. For instance, the search space is usually huge (often infinite) even for the simplest programs. Also, symbolic execution generally computes an overapproximation of the concrete execution space, so that false positives may occur. In this paper, we propose the use of a variant of symbolic execution, called concolic execution, for test case generation in Prolog. Our technique aims at full statement coverage. We argue that this technique computes an underapproximation of the concrete execution space (thus avoiding false positives) and scales up better to medium and large Prolog applications., This work has been partially supported by the EU (FEDER) and the Spanish Ministerio de Economía y Competitividad (Secretaría de Estado de Investigación, Desarrollo e Innovación) under grant TIN2013-44742-C4-1-R and by the Generalitat Valenciana under grant PROMETEO/2011/052.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

EXPERIMENTAL ASSESMENT OF THE STRENGTH OF COACHES STRUCTURES AFTER COLLISION REPAIR

  • Alcalá, Enrique
  • Rincón Dávila, David
  • Furones Crespo, Arturo
  • Martín López, Angel
[EN] Vehicles repair after an accident and the quality assurance of the repair is a major safety issue. If the vehicle type category is M3, collective road transport vehicles, there is an additional concern due to their high number of occupants, the responsibility of third parties transport and the severity of some type of collisions such as rollovers. Moreover it has to be considered that the high cost of these vehicles and the investment made on them by the transport companies makes it profitable to proceed to their repair after some accidents. In this work it is quantified the loss of energy absorption capabilities of the structural steel profiles of rectangular hollow section used in the construction of these vehicles. The deformation energy has been measured by means of bending tests and calculating the bending moment vs bending angle curve. The load has been applied to reach 10, 15 and 20 permanent bending angles, representing those rollover structural deformations found on coach collisions of different severities. All test specimens have been straightened and bended up to 20 degrees some in the same bending direction as initial bend test and some in the opposite direction. The results show a significant loss of strength of the profiles and the final influence on a repaired structure has been quantified modeling with a FEM model a standard Regulation ECE 66 of Geneva type approval test. It is then demonstrated how it should be defined requirements for repaired buses and coaches after their repair of structural damages in collisions., This research has been held with the support of the Madrid Community Council of Ediucation, Youth and Sport who funded the project ‘SEGuridad de los Vehículos AUTOmóviles, por un TRansporte Inteligente, Eficiente y Seguro’ (SEGVAUTO-TRIESCM) (P2013/MIT-2713) in the 2008–2011 National Research Program
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

SLURM Support for Remote GPU Virtualization: Implementation and Performance Study

  • Iserte Agut, Sergio
  • Mayo Gual, Rafael
  • Duato Marín, José Francisco
  • Reaño González, Carlos
  • Castelló, Adrián|||0000-0002-8576-8451
  • Quintana-Ortí, Enrique S.|||0000-0002-5454-165X
  • Silla, Federico|||0000-0002-6435-1200
  • Prades, Javier|||0000-0003-3349-2200
SLURM is a resource manager that can be leveraged to share a collection of heterogeneous resources among the jobs in execution in a cluster. However, SLURM is not designed to handle resources such as graphics processing units (GPUs). Concretely, although SLURM can use a generic resource plugin (GRes) to manage GPUs, with this solution the hardware accelerators can only be accessed by the job that is in execution on the node to which the GPU is attached. This is a serious constraint for remote GPU virtualization technologies, which aim at providing a user-transparent access to all GPUs in cluster, independently of the specific location of the node where the application is running with respect to the GPU node. In this work we introduce a new type of device in SLURM, "rgpu", in order to gain access from any application node to any GPU node in the cluster using rCUDA as the remote GPU virtualization solution. With this new scheduling mechanism, a user can access any number of GPUs, as SLURM schedules the tasks taking into account all the graphics accelerators available in the complete cluster. We present experimental results that show the benefits of this new approach in terms of increased flexibility for the job scheduler., The researchers at UPV were supported by the the Generalitat Valenciana under Grant PROMETEOII/2013/009 of the PROMETEO program phase II. Researchers at UJI were supported by MINECO, by FEDER funds under Grant TIN2011-23283, and by the Fundacion Caixa-Castelló Bancaixa (Grant P11B2013-21).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

DRIVER FEEDBACK MOBILE APP

  • Soriguera Marti, Francesc
  • Miralles Miquel, Enric
[EN] This paper faces the human factor in driving and its consequences for road safety. It presents the concepts behind the development of a smartphone app capable of evaluating drivers’ performance. The app provides feedback to the driver in terms of a grade (between 0 and 10) depending on the aggressiveness and risks taken while driving. These are computed from the cumulative probability distribution function of the jerks (i.e. the time derivative of acceleration), which are measured using the smartphones’ accelerometer. Different driving contexts (e.g. urban, freeway, congestion, etc.) are identified applying cluster analysis to the measurements, and treated independently. Using regression analysis, the aggressiveness indicator is related to the drivers' safety records and to the probability of having an accident, through the standard DBQ - Driving Behavior Questionnaire. Results from a very limited pilot test show a strong correlation between the 99th percentile of the jerk measurements and the DBQ results. A linear model is fitted. This allows quantifying the safe driving behavior only from smartphone measurements. Finally, this indicator is translated into a normalized grade and feedback to the driver. This feedback will challenge the driver to train and to improve his performance. The phone will be blocked while driving and will incorporate mechanisms to prevent bad practices, like competition in aggressive driving. The app is intended to contribute to the improvement of road safety, one of the major public health problems, by tackling the human factor which is the trigger of the vast majority of traffic accidents. Making explicit and quantifying risky behaviors is the first step towards a safer driving., The author acknowledges the collaboration of JuanPe Roldán and Bernat Garcia for their work on the preliminary data analysis and mathematical contributions, and to Cesar Trapote, for his knowledge and help with the DBQ survey. Thanks also to the 7 drivers who unselfishly participated in the pilot test. Without their contribution this research would not have been possible. This research has been partially funded by the Spanish Ministry of Economy and Competitiveness (TRA2013-45250-R/CARRIL) and partially supported by a grant from Iceland, Liechtenstein and Norway through the EEA Financial Mechanism. Operated by Universidad Complutense de Madrid.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

A View of P Systems from Information Theory

  • Sempere Luna, José María|||0000-0003-2393-9224
In this work we propose new view of P systems by using the framework of Information Theory. Given a cell-like P system with communication and evolution rules, we analyze the amount of information that it holds as the result of symbol movements across the membranes. Under this approach, we propose new definitions and results related to the information of P systems and their entropy. In addition, we propose a new working manner for P systems based only in the entropy evolution during the computation time., Work partially supported by the Spanish Ministry of Economy and Competitiveness under EXPLORA Research Project SAF2013-49788-EXP.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Evaluación de la competencia transversal CT09 Pensamiento crítico a través de series de ficción en la asignatura de Gestión empresarial de la edificación en el Máster de Edificación de la Universitat Politècnica de València

  • Ramón Fernández, Francisca|||0000-0002-0936-8229
  • Cabedo Mallol, Vicente|||0000-0001-5248-5220
  • Casar Furió, María Emilia|||0000-0001-5910-8815
  • Gimenez-Chornet, Vicent|||0000-0003-1183-9058
  • Lull, Cristina|||0000-0001-9270-2365
  • Oltra Gutiérrez, Juan Vicente|||0000-0002-7765-1085
[EN] This paper analyzes the use of fiction series for the evaluation of transversal competence CT 09 Critical thinking, after the granting of a project of innovation teaching (PIME) by the Universitat Politècnica de València, for the year 2016. The results obtained with 33 students of the subject of Bulding Business Management, in the Master’s Degree in Building Constructions, and the evaluation of the indicated competence after watching, in which the students make a critique of the situations observed in the selected episode. The rubric established by the Universitat Politècnica de València is used for selfevaluation. We believe that the understanding is facilitated and that the students have a tool to evaluate the competence, and the ability to perceive situations related to the concepts explained in the subject is strengthened. It combines the new information and communication technologies (ICTs), which is the main objective of the innovation group, with activities that allow students to be evaluated in this competition., [ES] En el presente trabajo se analiza la utilización de series de ficción para la evaluación de la competencia transversal CT 09 Pensamiento crítico, tras la concesión de un proyecto de innovación docente (PIME) por parte de la Universitat Politècnica de València, para el año 2016.Se analizan los resultados obtenidos en 33 alumnos de la asignatura de Gestión empresarial de la edificación, en el Máster Universitario en Edificación, y la evaluación de la competencia indicada tras el visionado de una serie de ficción, en la que el alumnado realiza una crítica de las situaciones observadas en el episodio seleccionado. Se utiliza la rúbrica establecida por la Universitat Politècnica de València para la autoevaluación.Consideramos que se facilita la comprensión y que el alumnado dispone de una herramienta para evaluar la competencia, y se potencia la capacidad de percepción de situaciones relacionadas con los conceptos explicados en la asignatura. Se combina las nuevas tecnologías de la información y la comunicación (TICs), que es el objetivo principal del grupo de innovación, con las actividades que permiten al alumnado ser evaluado en dicha competencia., Trabajo realizado en el marco del PIME «La evaluación de la competencia transversal pensamiento crítico mediante la utilización de series de ficción» de la Universitat Politècnica de València, 2016-2017. Coordinado por la Dra. Dª. Francisca Ramón Fernández; Proyecto MINECO (DER2013-4256R), siendo los Investigadores Principales la Dra. Dª. Luz María Martínez Velencoso, Profesora Titular de Derecho civil, Universitat de València-Estudi General, y el Dr. D. Javier Plaza Penadés, Catedrático de Derecho civil, Universitat de València-Estudi General, y Proyecto «Derecho civil valenciano y europeo» del Programa Prometeo para Grupos de Investigación de Excelencia de la Conselleria de Educación, Cultura y Deporte, GVPROMETEOII2015-014 y del Microcluster «Estudios de Derecho y empresa sobre TICs (Law and business studies on ICT)», dentro del VLC/Campus, Campus de Excelencia Internacional (International Campus of Excellence), coordinado por el Dr. D. Javier Plaza Penadés, Catedrático de Derecho civil, Universitat de València-Estudi General, y Proyecto I+D Excelencia del Ministerio y Competitividad. “El avance del Gobierno Abierto. Régimen jurídico constitucional de la implantación de políticas de transparencia, acceso a la información, datos abiertos, colaboración y participación especialmente a través de las TIC y del Gobierno electrónico”. DER2015- 65810-P (2016-2018). Investigador Principal: Dr. D. Lorenzo Cotino Hueso. Catedrático acreditado de Derecho constitucional. Universitat de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Simulation Study of the Effect of Decreasing Truck Traffic Flow on Safety on Almeria-Barcelona Corridor

  • Dadashova, Bahar
  • Arenas Ramirez, Blanca
  • González Fernandez, Camino
  • Aparicio Izquierdo, Francisco
[EN] In this paper the effect of truck traffic on road safety has been analyzed through simulation study. The main objective of the study is to quantify the effect of the decreasing average annual daily traffic of heavy duty vehicles (trucks) on road safety. As the road safety indicators the frequency road accidents is considered. The data used in the study were collected from one of the most crowded routes in Spain which connects Almeria (south-east) with Barcelona (northeast). The observed data covers year 2010 and were classified into 2 road types: dual carriageways and toll roads. The estimation was carried out using negative binomial model and Markov Chain Monte Carlo simulation. Using the estimation results new traffic scenarios were proposed where the traffic flow is assumed to change its values. A total of 33 scenarios were proposed and new accidents data were generated through MCMC sampling. The comparison of the simulated and observed accident data shows that the effect of decreasing truck traffic flow could meliorate road safety in the route. The simulation tool could be applied to evaluate the effects of freight modal shift from road to rail., This work has been carried out in the framework of the MODALTRAM - TRA2011- 28647-C02-01 Research Project "Development of an integrated methodology for the assessment of effects on Safety and Environment, for the road and rail modal shift", of the Spanish National Research Plan 2011-2014, Ministry of Economy and Competitiveness (MINECO). The authors would also like to thanks the Community of Madrid, that contributed to this work through the SEGVAUTO-TRIES-CM (S2013-MIT2713) Programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Matlab-based tool for drainage network ordering by Horton and Hack hierarchies, Herramienta diseñada en Matlab para la ordenación de redes de drenaje por las jerarquías de Horton y Hack

  • Pastor-Martín, Candela
  • Antón, Loreto
  • Fernández-González, Carlos
[EN] This work presents a new MATLAB-based tool designed for network extraction and drainage network orderings by Horton and Hack hierarchies. Most GIS software offers only topological network orderings, based on joining segments, such as Stahler or Shreve, providing segments between junctions but not entire streams. Differently, Hack and Horton orderings allow organizing a drainage network in a hierarchy, identifying the parent segment over the child segment, giving as a result a drainage network where the value of a river remains unchanged from the mouth upstream to the headwater, allowing extracting entire streams. Horton and Hack hierarchies ease the interpretation of a drainage system compared to Strahler and Shreve. To extract the drainage network, this tool uses TopoToolbox 2 functions, to compute the prior steps of the channel network extraction and channel network ordering processes, and develops new functions. To sort a network, this tool allows selecting the parameter that defines the network hierarchy. This parameter is the socalled hierarchy attribute and could be the distance upstream, which refers to the distance between a junction upstream to the headwater, or the upstream accumulation, which is the accumulation at the junction. In addition to these mandatory parameters, the tool offers a set of optional parameters which turns it into a competitive alternative to generate a highly tailored ordered drainage network. The continuous channel network provided by the tool facilitates the use of other multiple applications for landscape analysis, such as the extraction longitudinal profiles or basin analysis through geomorphic indices., [ES] Este trabajo presenta una nueva herramienta diseñada en MATLAB para la extracción y ordenación de redes de drenaje por las jerarquías de Horton y Hack. La mayoría de software GIS ofrece sólo ordenaciones topológicas de redes, basadas en la unión de segmentos, como las ordenaciones de Stahler o Shreve, que proveen segmentos entre puntos de confluencia pero no canales completos. En cambio, las ordenaciones de Hack y Horton permiten organizar una red de drenaje en una jerarquía, identificando el segmento primario sobre el segmento secundario, dando como resultado una red de drenaje donde el valor de un río permanece inalterado desde la desembocadura aguas arriba hasta la cabecera. Las ordenaciones de Horton y Hack facilitan la interpretación de un sistema de drenaje comparado con Strahler y Shreve. Para extraer la red de drenaje, esta herramienta utiliza funciones de TopoToolbox 2 para calcular los pasos previos de los procesos de extracción y ordenación de la red y además desarrolla nuevas funciones. Para ordenar la red, esta herramienta permite seleccionar el parámetro que define la jerarquía de la red. Este parámetro es el llamado atributo de jerarquía que puede ser la distancia aguas arriba, que se refiere a la distancia desde el punto de confluencia a la cabecera, o la acumulación ascendente, que es la acumulación en el punto de confluencia. Además de estos parámetros obligatorios, la herramienta ofrece un conjunto de parámetros opcionales que la convierten en una alternativa competitiva para generar una red de drenaje ordenada personalizada. Esta herramienta permite generar de una red fluvial continua que es requerida en otras múltiples aplicaciones como puede ser para la extracción perfiles longitudinales y/o el análisis de cuencas a través de índices geomórficos., This work was supported by MEC under Grant PEJ2014-A-93258; by UNED under Grant GID2016-19; and it was partially funded by MITE under Grant CGL2014- 59516-P and CARESOIL S2013/MAE-2739 projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

ACUOS: A System for Modular ACU Generalization with Subtyping and Inheritance

  • Alpuente Frasnedo, María|||0000-0002-9268-1178
  • Escobar Román, Santiago|||0000-0002-3550-4781
  • Espert Real, Javier
  • Meseguer, José
Computing generalizers is relevant in a wide spectrum of automated reasoning areas where analogical reasoning and inductive inference are needed. The ACUOS system computes a complete and minimal set of semantic generalizers (also called “anti-unifiers”) of two structures in a typed language modulo a set of equational axioms. By supporting types and any (modular) combination of associativity (A), commutativity (C), and unity (U) algebraic axioms for function symbols, ACUOS allows reasoning about typed data structures, e.g. lists, trees, and (multi-)sets, and typical hierarchical/structural relations such as is a and part of. This paper discusses the modular ACU generalization tool ACUOS and illustrates its use in a classical artificial intelligence problem., This work has been partially supported by the EU (FEDER) and the Spanish MINECO under grants TIN 2010-21062-C02-02 and TIN 2013-45732-C4-1-P, by Generalitat Valenciana PROMETEO2011/052, and by NSF Grant CNS 13-10109. J. Espert has also been supported by the Spanish FPU grant FPU12/06223.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Intelligent Traffic Light Management using Multi-Behavioral Agents

  • Cruz-Piris, Luis
  • Rivera, Diego
  • Marsa-Maestre, Ivan
  • de la Hoz, Enrique
  • Fernandez, Susel
[EN] One of the biggest challenges in modern societies is to solve vehicular traffic problems. In this scenario, our proposal is to use a Multi-Agent Systems (MAS) composed of three types of agent: traffic light management agents, traffic jam detection agents, and agents that control the traffic lights at an intersection. This third type of agent is able to change its behaviour between what we have called a selfish mode (the agent will try to influence the other neighbour agents of its type to achieve its goal) or an altruistic mode (the agent will take into consideration the other neighbour selfish agents indications). To validate our solution, we have developed a MAS emulator which communicates with the Simulation of Urban MObility (SUMO) traffic simulator using the Traci tool to realize the experiments in a realistic environment. The obtained results show that our proposal is able to improve other existing solutions such as conventional traffic light management systems (static or dynamic) in terms of reduction of vehicle trip duration., This work has been supported by the Spanish Ministry of Economy and Competitiveness grants TIN2016-80622-P, TIN2014-61627-EXP and TEC2013-45183-R, and by the University of Alcala through CCG2016/EXP-048.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Models for logics and conditional constraints in automated proofs of termination

  • Lucas Alba, Salvador|||0000-0001-9923-2108
  • Meseguer, José
Reasoning about termination of declarative programs, which are described by means of a computational logic, requires the definition of appropriate abstractions as semantic models of the logic, and also handling the conditional constraints which are often obtained. The formal treatment of such constraints in automated proofs, often using numeric interpretations and (arithmetic) constraint solving can greatly benefit from appropriate techniques to deal with the conditional (in)equations at stake. Existing results from linear algebra or real algebraic geometry are useful to deal with them but have received only scant attention to date. We investigate the definition and use of numeric models for logics and the resolution of linear and algebraic conditional constraints as unifying techniques for proving termination of declarative programs., Developed during a sabbatical year at UIUC. Supported by projects NSF CNS13-19109, MINECO TIN2010-21062-C02-02 and TIN2013-45732-C4-1-P, and GV BEST/2014/026 and PROMETEO/2011/052.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Developing Intelligent Virtual Environments using MAM5 Meta-Model

  • Rincón Arango, Jaime Andrés
  • Garcia Marques, Mª Emilia
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
An IVE (Intelligent Virtual Environment) is a virtual environment simulating a physical (or real) world, inhabited by autonomous intelligent entities[2]. Today, this kind of applications are between the most demanded ones, not only as being the key for multi-user games such as World Of Warcraft (with more than 7 million of users in 2013) but also for inmersive social networks such as Second Life (with 36 million accounts created in its 10 years of history). It is in the development of these huge IVEs where the need of a quick and easy-to-use modelling toolkit arises., This work is partíally supported by the TIN2012-36586-C03-01, PROMETEOII/2013/019 and the FPI grant AP2013-01276 awarded to Jaime-Andres Rincon.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Combining Runtime Checking and Slicing to Improve Maude Error Diagnosis

  • Alpuente Frasnedo, María|||0000-0002-9268-1178
  • Sapiña-Sanchis, Julia|||0000-0003-2994-6986
  • Ballis, Demis
  • Frechina Navarro, Francisco
This paper introduces the idea of using assertion checking for enhancing the dynamic slicing of Maude computation traces. Since trace slicing can greatly simplify the size and complexity of the analyzed traces, our methodology can be useful for improving the diagnosis of erroneous Maude programs. The proposed methodology is based on (i) a logical notation for specifying two types of user-defined assertions that are imposed on execution runs: functional assertions and system assertions; (ii) a runtime checking technique that dynamically tests the assertions and is provably safe in the sense that all errors flagged are definite violations of the specifications; and (iii) a mechanism based on equational least general generalization that automatically derives accurate criteria for slicing from falsified assertions., This work has been partially supported by the EU (FEDER) and the Spanish MINECO project ref. TIN2013-45732-C4-01 (DAMAS), and by Generalitat Valenciana ref. PROMETEOII/2015/013 (SmartLogic). F. Frechina was supported by FPU-ME grant AP2010-5681, and J. Sapiña was supported by FPI-UPV grant SP2013-0083.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Influencia del espectro sísmico en los efectos de los terremotos en las edificaciones, Seismic spectrums influence in building structural damage

  • Navas Sánchez, Laura
  • Cervera Bravo, Jaime
  • Benito Oterino, Belén
[EN] This project aims to analyse the influence that the response spectrum form may have in the damage that a building structure suffers. In order to demonstrate, two different buildings have been modelled: the first represents a typical construction situated in Lorca, which has a long fundamental period. And another which has a short fundamental period, whose singular design allows us to extract some conclusions about the influence of certain factors such as irregularities or torsion effects. Besides, it will be applied in both buildings two different seisms: a short and a long-period response spectrum, so as to study the resonance phenomenon. In addition, it will be exposed briefly the most important changes that have suffered the seismic codes according to the seismic design of building structures., [ES] En el presente trabajo se analiza la influencia que puede tener el espectro de respuesta en el daño que una edificación puede sufrir. Para ello, se modelan dos edificios: uno en Lorca, representativo de la tipología estructural del lugar y un edificio singular que, por sus irregularidades, permite extraer conclusiones sobre la influencia del diseño de la estructura en su resistencia frente al sismo. Además, a ambos se los somete a dos espectros sísmicos distintos: uno con un espectro de respuesta de periodo largo, el ocurrido en Mayo de 2011 en Lorca, y otro de periodo corto, el ocurrido en Avezzano, Italia en Octubre de 2016. Finalmente, se incluyen algunos apuntes sobre los avances en materia sísmica de las normativas y su influencia en el diseño antisísmico., Este trabajo ha sido financiado por el Proyecto MERISUR, Programa Estatal Español de I+D+I Orientada a los Retos de la Sociedad, Ministerio de Economía (ref. CGL2013-40492-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Monitoring critical infrastructure exposed to anthropogenic and natural hazards using satellite radar interferometry, Monitorización de infraestructuras críticas expuestas a riesgos naturales y antrópicos mediante interferometría radar de satélite

  • Ruiz-Armenteros, Antonio
  • Delgado-Blasco, José
  • Bakon, Matus
  • Lazecky, Milan
  • Marchamalo-Sacristán, Miguel
  • Lamas-Fernández, Francisco
  • Ruiz-Constán, Ana
  • Galindo-Zaldívar, Jesús
  • Sanz de Galdeano, Carlos
  • Martos-Rosillo, Sergio
  • Papco, Juraj
  • Perissin, Daniele
  • Sousa, Joaquim
[EN] Synthetic Aperture Radar Interferometry (InSAR) is a remote sensing technique very effective for the measure of smalldisplacements of the Earth’s surface over large areas at a very low cost as compared with conventional geodetictechniques. Advanced InSAR time series algorithms for monitoring and investigating surface displacement on Earth arebased on conventional radar interferometry. These techniques allow us to measure deformation with uncertainties of 1mm/year, interpreting time series of interferometric phases at coherent point scatterers (PS) without the need for humanor special equipment presence on the site. By applying InSAR processing techniques to a series of radar images over thesame region, it is possible to detect line-of-sight (LOS) displacements of infrastructures on the ground and therefore identifyabnormal or excessive movement indicating potential problems requiring detailed ground investigation. A major advantageof this technology is that a single radar image can cover a major area of up to 100 km by 100 km or more as, for example,Sentinel-1 C-band satellites data cover a 250 km wide swath. Therefore, all engineering infrastructures in the area, suchas dams, dikes, bridges, ports, etc. subject to terrain deformation by volcanos, landslides, subsidence due to groundwater,gas, or oil withdrawal could be monitored, reducing operating costs effectively. In this sense, the free and open accessCopernicus Sentinel-1 data with currently up to 6-days revisit time open new opportunities for a near real-time landmonitoring. In addition, the new generation of high-resolution radar imagery acquired by SAR sensors such as TerraSARX,COSMO-SkyMed, and PAZ, and the development of multi-interferogram techniques has enhanced our capabilities inrecent years in using InSAR as deformation monitoring tool. In this paper, we address the applicability of using spaceborneSAR sensors for monitoring infrastructures in geomatics engineering and present several cases studies carried out by ourgroup related to anthropogenic and natural hazards, as well as monitoring of critical infrastructures., [ES] La interferometría radar de apertura sintética (InSAR) es una técnica de teledetección muy eficaz para medir pequeños desplazamientos de la superficie terrestre en grandes áreas a un coste muy pequeño en comparación con las técnicas geodésicas convencionales. Los algoritmos avanzados de series temporales InSAR para monitorizar e investigar el desplazamiento de la superficie terrestre se basan en la interferometría radar convencional. Estas técnicas nos permiten medir la deformación con incertidumbres de un milímetro por año, interpretando series temporales de fases interferométricas en retrodispersores puntuales coherentes (PS) sin necesidad de presencia humana o de equipos especiales en el sitio. Al aplicar técnicas de procesamiento InSAR a una serie de imágenes radar de la misma región, es posible detectar desplazamientos de infraestructuras proyectados en la línea de vista del satélite (line-of-sight o LOS) y, por lo tanto, identificar movimientos anormales o excesivos que indiquen problemas potenciales que requieran una investigación detallada del terreno. Una de las principales ventajas de esta tecnología es que una sola imagen radar puede cubrir un área importante de hasta 100 km por 100 km o más, ya que, por ejemplo, los datos de los satélites de banda C Sentinel-1 cubren una franja de 250 km de ancho. Por lo tanto, todas las infraestructuras civiles de la zona, como presas, diques, puentes, puertos, etc., sujetas a deformaciones del terreno por actividad volcánica, deslizamientos de tierra, hundimientos por extracción de agua subterránea, gas o petróleo, podrían ser monitorizados, reduciendo los costes operativos de manera efectiva. En este sentido, los datos Sentinel-1 de Copernicus, de acceso abierto, con hasta 6 días de tiempo de revisión actual abren nuevas oportunidades para una monitorización terrestre casi en tiempo real. Además, la nueva generación de imágenes radar de alta resolución adquiridas por sensores SAR como TerraSAR-X, COSMOSkyMed y PAZ, y el desarrollo de técnicas multi-interferograma ha mejorado nuestras capacidades en los últimos años en el uso del InSAR como herramienta para el control de deformaciones. En este trabajo se aborda la aplicabilidad del uso de sensores SAR espaciales para la monitorización de infraestructuras civiles en ingeniería geomática y presentamos varios casos de estudio realizados por nuestro grupo relacionados con riesgos naturales y antrópicos, así como de monitorización de infraestructura crítica., ERS-1/2 and Envisat datasets were provided by the European Space Agency (ESA). Sentinel-1A/B data were freely provided by ESA through Copernicus Programme. Data have been processed by DORIS (TUDelft), StaMPS (Andy Hooper), SARPROZ (Copyright (c) 2009-2020 Daniele Perissin), and SNAP (ESA). The satellite orbits are from TUDelft and ESA, as well as from the ESA Quality Control Group of Sentinel-1. Research was supported by [ESA Research and Service Support] for providing hardware resources employed in this work; [Spanish Ministry of Economy, Industry and Competitiveness] under ReMoDams project ESP2017-89344-R (AEI/FEDER, UE); [University of Jaén (Spain)] under PAIUJA-2021/2022 and CEACTEMA; [Junta de Andalucía (Spain)] under RNM-282 research group; [ERDF through the Operational Programme for Competitiveness and Internationalisation - COMPETE 2020 Programme] within project «POCI-01-0145-FEDER006961»; [National Funds through the FCT – Fundação para a Ciência e a Tecnologia (Portuguese Foundation for Science and Technology)] as part of project UID/EEA/50014/2013; [The Ministry of Education, Youth and Sports from the National Programme of Sustainability (NPU II)] under project «IT4Innovations excellence in science - LQ1602» (Czech Republic); and [Slovak Grant Agency VEGA] under projects No. 2/0100/20
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Uso de Software-Defined Radio en la enseñanza de sistemas de comunicaciones

  • Segura-Garcia, Jaume
  • Soriano Asensi, Antonio
  • Botella, Carmen
  • Felici-Castell, Santiago
  • García-Pineda, Miguel
[ES] En la docencia de sistemas de comunicación hay una componente teórica elevada. La percepción de los estudiantes al estudiar estas asignaturas es negativa. Este trabajo trata de explicar la motivación y la estrategia seguida para reorientar esta percepción a partir de la introducción de elementos de “Software-Defined Radio” (SDR) y “Universal Software Radio Peripherals” (USRP) en diferentes asignaturas del Grado de Ingenier´ıa Telem´atica de la Universitat de València, Los autores quieren agradecer al Servei de Formació Permanent i Innovació Educativa - Centre de Formació i Qualitat "Manuel Sanchis Guarner" de la Universitat de València por la ayuda concedida para el soporte parcial de este proyecto de innovación docente (ref: UVSFPIE_RMD15-314373) y la Ministerio de Economía e Innovación por la ayuda con referencia TEC2013-47141-C4-4-R con la que se ha financiado parcialmente este trabajo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Cajas de trabajabilidad como herramienta de diseño de hormigones autocompactantes con árido reciclado

  • González Taboada, Iris
  • González Fonteboa, Belén
  • Martinez Abella, Fernando
  • Varela Puga, Fernando
[ES] En este trabajo se diseñan siete hormigones autocompactantes convencionales y de cada uno de ellos se obtienen tres hormigones autocompactantes con árido grueso reciclado de hormigón (utilizando sustituciones del 20%, 50% y 100% en volumen). Las mezclas recicladas se fabrican utilizando el árido reciclado seco y con un 3% de humedad natural, añadiendo, en ambos casos, una cantidad de agua extra durante el amasado para compensar la elevada absorción de este tipo de árido. Todos los hormigones se ensayan en estado fresco mediante ensayos empíricos y reológicos a los 15 y 45 minutos del contacto entre cemento y agua. Los resultados indican que las relaciones entre diferentes parámetros de comportamiento en fresco en los hormigones autocompactantes reciclados (HACRs) siguen las mismas tendencias que las observadas en los hormigones autocompactantes convencionales. Para facilitar el diseño de estos HACRs, se proponen unas regiones de trabajabilidad definidas por aquellas mezclas que cumplen una serie de combinaciones de parámetros empíricos. Estas regiones permiten delimitar una caja de trabajabilidad (área en el reograma tensión de flujo estática y viscosidad plástica) en la que se garantiza que los HACRs que se sitúen en ella cumplen diferentes límites empíricos., Este estudio es parte de dos proyectos titulados: (a) “Investigación industrial sobre Hormigones para un Mercado Sostenible (InHorMeS)” financiado por la Axencia Galega de Innovación (Ref: IN852A 2013/57); (b) “Hormigones reciclados autocompactantes robustos: reología en estado fresco y propiedades mecánicas (HORREO)” financiado por el Ministerio de Economía y Competitividad (Ref: BIA2014-58063-R). Además, este trabajo fue posible gracias al apoyo de una beca predoctoral de la Xunta de Galicia (España).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

C-tests revisited: back and forth with complexity

  • Hernández-Orallo, José|||0000-0001-9746-7632
We explore the aggregation of tasks by weighting them using a difficulty function that depends on the complexity of the (acceptable) policy for the task (instead of a universal distribution over tasks or an adaptive test). The resulting aggregations and decompositions are (now retrospectively) seen as the natural (and trivial) interactive generalisation of the C-tests., This work has been partially supported by the EU (FEDER) and the Spanish MINECO under grants TIN 2010-21062-C02-02, PCIN-2013-037 and TIN 2013-45732-C4-1-P, and by Generalitat Valenciana PROMETEOII 2015/013.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Analysis of the IBM CCA Security API Protocols in Maude-NPA

  • González Burgueño, Antonio
  • Santiago Pinazo, Sonia
  • Meadows, Catherine
  • Meseguer, Jose
  • Escobar Román, Santiago|||0000-0002-3550-4781
Standards for cryptographic protocols have long been attractive candidates for formal verification. It is important that such standards be correct, and cryptographic protocols are tricky to design and subject to non-intuitive attacks even when the underlying cryptosystems are secure. Thus a number of general-purpose cryptographic protocol analysis tools have been developed and applied to protocol standards. However, there is one class of standards, security application programming interfaces (security APIs), to which few of these tools have been applied. Instead, most work has concentrated on developing special-purpose tools and algorithms for specific classes of security APIs. However, there can be much advantage gained from having general-purpose tools that could be applied to a wide class of problems, including security APIs. One particular class of APIs that has proven difficult to analyze using general-purpose tools is that involving exclusive-or. In this paper we analyze the IBM 4758 Common Cryptographic Architecture (CCA) protocol using an advanced automated protocol verification tool with full exclusive-or capabilities, the Maude-NPA tool. This is the first time that API protocols have been satisfactorily specified and analyzed in the Maude-NPA, and the first time XOR-based APIs have been specified and analyzed using a general-purpose unbounded session cryptographic protocol verification tool that provides direct support for AC theories. We describe our results and indicate what further research needs to be done to make such protocol analysis generally effective., Antonio González-Burgueño, Sonia Santiago and Santiago Escobar have been partially supported by the EU (FEDER) and the Spanish MINECO under grants TIN 2010-21062-C02-02 and TIN 2013-45732-C4-1-P, and by Generalitat Valenciana PROMETEO2011/052. José Meseguer has been partially supported by NSF Grant CNS 13-10109.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

¿Cuál es el perfil de los usuarios de BiciMAD? Análisis cluster ex-ante y ex-post a la inauguración del servicio

  • Garcia-Martinez, Andres
  • Lillo, Roberto
[ES] A pesar de que la mayoría los sistemas públicos de bicicletas en España comienzan a desarrollarse a partir de 2007, en la actualidad se encuentran en un momento de pleno desarrollo, pues aún siguen ampliando su área de servicio e incorporando nuevos elementos. Estos sistemas adquieren una tremenda importancia como herramientas para la promoción de la bicicleta, además de ofrecer una alternativa extra dentro del entramado de posibilidades de transporte que presenta una ciudad. En junio de 2014, Madrid implantó su propio sistema público de bicicletas (BiciMAD). Este servicio resultó innovador en muchos sentidos, pues contaba con la singularidad de ofrecer asistencia eléctrica al pedaleo. Esta tecnología mitiga uno de los principales obstáculos al usar la bicicleta: la orografía. Por otra parte, el servicio incorpora un novedoso sistema de bonificaciones, una aplicación móvil avanzada y además, es el primero en ámbito nacional que cobra por uso desde la primera media hora. El artículo tiene el objetivo de estudiar los perfiles de usuarios de BiciMAD, mediante un análisis cluster que clasifica a los individuos según la frecuencia de uso del servicio. Para ello, se realizaron dos olas de encuestas a usuarios del sistema: una ex-ante a su inauguración (en mayo de 2014) y otra tras un año de funcionamiento (en junio de 2015). Los resultados arrojan 3 perfiles de usuarios claramente diferenciados (ciclistas habituales, ciclistas esporádicos y nuevos usuarios). El estudio aporta evidencias sobre un aumento en el uso de la bicicleta privada para todos los motivos de viaje de los abonados a BiciMAD, a la vez que escenifica un uso del sistema predominantemente para viajes de movilidad obligada -trabajo o estudios-, especialmente entre nuevos usuarios atraídos por las características del sistema y las innovaciones ofrecidas., Este trabajo ha sido financiado en parte por el Ministerio de Economía y Competitividad, gracias a la concesión de una ayuda para Formación de Personal Investigador (FPI) al autor principal [BES-2014-069223]. Esta ayuda está asociada al proyecto Transfer [TRA2013- 45239-R].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Social Risk Map. The design of a complementary methodology to vulnerability indexes applied to urban rehabilitation activity

  • Ruiz-Varona, Ana
  • León-Casero, Jorge
[EN] Conception of urban intervention in the city is increasingly mutating from a physical urban renewal to an integrated urban approach. That is to say, measures concerning physical urban renewal should be combined with measures promoting education, economic development, social inclusion and environmental protection (European Commission, 2014). Current methodologies applied to the analysis of potential distressed areas are based on quantitative variables. The combination of these variables into a matrix characterizes the areas of the city that are subjected to different grades of intervention in terms of urban vulnerability and social exclusion. However, literature demonstrates that there are still few tools capable of measuring spatially which areas are the most sensitive to the decline in social relations within the city. Research on social maps suggests that potential attractors and risk areas can be identified from the design of a methodology based on the social perception of the public space. The application of this methodology to different case studies at the neighborhood level shows the correlation between urban vulnerability approach (quantitative) and social perception (qualitative). Indeed, perception and characterization of social risk areas empowers current urban vulnerability indicators for the integrated urban approach. Findings validate the utility of this methodology for the implementation of this model to cities and illustrate the social sphere of analysis as a platform from which to assess risk in urbanized areas, This work was supported by a grant from the Spanish Ministry of Economy, Industry and Competitiveness (CSO2013-42576-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Augmented Tangible Surfaces to Support Cognitive Games for Ageing People

  • García Sanjuan, Fernando
  • Catalá Bolós, Alejandro
  • Jaén Martínez, Francisco Javier|||0000-0002-8815-9643
The continuous and rapidly increasing elderly population requires a revision of technology design in order to devise systems usable and meaningful for this social group. Most applications for ageing people are built to provide supporting services, taking into account the physical and cognitive abilities that decrease over time. However, this paper focuses on building technology to improve such capacities, or at least slow down their decline, through cognitive games. This is achieved by means of a digitally-augmented table-like surface that combines touch with tangible input for a more natural, intuitive, and appealing means of interaction. Its construction materials make it an affordable device likely to be used in retirement homes in the context of therapeutic activities, and its form factor enables a versatile, quick, and scalable configuration, as well as a socializing experience., This work received financial support from Spanish Ministry of Economy and Competitiveness under the National Strategic Program of Research and Project TIN2010-20488, and from Universitat Politécnica de Valencia under Project UPV-FE-2014-24. It is also supported by fellowships APOST D/2013/013 and ACIF/2014/214 within the VALi+d program from Conselleria d’Educació, Cultura i Esport (GVA).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

EVALUACIÓN Y PROPUESTAS DE MEJORA DEL USO DE LA ENERGÍA EN REDES DE RIEGO. APLICACIÓN A LA COMUNIDAD DE REGANTES MURADA NORTE (ORIHUELA, ALICANTE)

  • Ruiz-Rodríguez, M
  • Jiménez Bello, Miguel Angel|||0000-0003-1057-3331
  • Pulido-Velazquez, M.|||0000-0001-7009-6130
[ES] La modernización de las infraestructuras agrícolas de regadío ha supuesto generalmente un incremento en el consumo energético de estas instalaciones. Tomando como referencia el Protocolo de Auditoría Energética en Comunidad de Regantes (CCRR) del Instituto para la Diversificación y Ahorro de Energía (IDAE), se evalúan e identifican actuaciones de mejora del uso de la energía en la red de riego de la CCRR Murada Norte (Orihuela, Alicante). En primer lugar se caracteriza la red de riego, su gestión y su consumo, elaborando un modelo matemático de la red con herramientas SIG y EPANET. Posteriormente se realiza una evaluación del uso de la energía con los indicadores de gestión energética del protocolo del IDAE, a través del cual se consigue calificar energéticamente la CCRR. Finalmente como actuaciones de mejora se propone la construcción de una nueva balsa de regulación que permite reducir la altura media de impulsión, la sustitución del equipo de bombeo actual para mejorar la eficiencia del bombeo y reducir la potencia contratada en horas punta, y la renegociación de la tarifa eléctrica., Los autores de este trabajo muestran su agradecimiento a la CCRR Murada Norte por su participación en este estudio y al proyecto IMPADAPT (CGL2013-48424-C2-1-R) del Plan Estatal de I+D+i (Ministerio de Economía y Competitividad) por su financiación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

University contribution to developing generic competences and employment status after graduation: a mediated model

  • Hernández Baeza, Ana
  • Tomás Marco, Inés
  • Davcheva, Marija
  • González-Romá, Vicente
[EN] In this study we analyze whether the university contribution to the development of generic competences is related to the employment status of graduates six months after graduation. Specifically, we propose that there are two mediating mechanisms in the relationship: 1) a sequential mechanism that involves two mediators: the generic competences acquired by students and their core self-evaluations; and 2) a simple mediating mechanism that only involves the generic competences acquired. We tested the research model in a sample of 303 students from a Spanish University. We collected information when the students were about to complete their degrees and six months after graduation. Results supported the sequential indirect effect proposed via generic competences and core self-evaluations., This work was supported by research grants provided by the Spanish Ministry of Economy and Competitiveness (MINECO), the Spanish State Research Agency (AEI), and the European Regional Development Fund (ERDF). [PSI2013-47195-R] and [Ref. PSI2017-86882-R].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Seguridad De Ciclistas Circulando En Pelotón En Carretera Convencional

  • Llorca García, Carlos
  • Serra Planelles, Jorge
  • García García, Alfredo|||0000-0003-1345-3685
[ES] La afluencia de ciclistas aficionados en carreteras convencionales para la práctica de actividades deportivas es muy notable, llegando en algunos casos a que la intensidad de tráfico ciclista supere a la de tráfico motorizado. Sin embargo, la presencia de ciclistas compartiendo la infraestructura con vehículos supone un problema para la seguridad vial. Los accidentes relacionados con alcances, adelantamientos o salidas de vía tienen consecuencias muy graves, debido a la diferencia de velocidad y tamaño entre bicicletas y vehículos y a la falta de protección del cuerpo del ciclista ante un accidente.En particular, la disposición de los ciclistas al circular en la vía (individualmente, en línea, en paralelo, etc.) puede afectar a su visibilidad, capacidad de reacción y margen de seguridad disponible en las maniobras de adelantamiento realizadas por el tráfico motorizado. Esta investigación caracterizó las trayectorias y la posible invasión del sentido contrario de los vehículos a motor, cuando adelantaron a ciclistas dispuestos en diversas configuraciones de pelotón (individual, 2 en línea, 2 en paralelo).Para ello, se hizo circular a tres ciclistas, en configuraciones previamente fijadas, por un tramo de carretera convencional. Las bicicletas fueron equipadas con distanciómetros láser, medidores de velocidad, GPS cámaras de video, y un pulsador mediante el que los ciclistas valoraban el riesgo percibido cada vez que un vehículo motorizado les rebasaba. El análisis de los datos obtenidos permitió comparar, en las diversas configuraciones de pelotón, la distribución de las distancias laterales durante el adelantamiento, las velocidades de los vehículos que adelantan, y el nivel de riesgo percibido.Los resultados obtenidos proporcionaron criterios para evaluar los riesgos de circular en cada una de las configuraciones, en base a características objetivas (separación, velocidad o tipo de vehículo), y subjetivas (percepción de riesgo)., Este estudio se enmarca en el proyecto “CASEFU, Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales” con referencia TRA2013-42578-P, subvencionado por el Ministerio de Economía y Competitividad.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Las proyecciones audiovisuales en pantallas no convencionales, antecedentes del video mapping

  • Martínez Arroyo, Emilio José|||0000-0001-6794-9032
  • Gracia Bensa, Trinidad
  • Doménech Ibáñez, Isabel
  • López Poquet, Josepa
[EN] The presence of the "screen" in film and television is a conventional audioIvisual space. However these conventional screens are just one of the possibilities explored by artists of the medium from the beginning of audiovisual projections. Exploring unconventional screens is standard practice since the beginning of the history of the projections to the present time. The appearance of videomapping techniques associated with digital technologies have taken a quantum leap opening possibilities, public participation, digital editing and remixing "in live" use of public space as a space of projection, etc., Allowing the deployment of numerous expressive resources and expanded options and possibilities of projections. This expanded capacity for experimentation sometimes has in common with preIdigital experiences that make up a set of benchmarks and milestones. The purpose of this test is to collect references of these fundamental research linking the analog era with the latest explorations, from the experience of the research group Laboratorio de Luz I UPV. This work is part of the mutant screens project. " The interactive audiovisual projection mapping techniques in unconventional spaces (public spaces, art installations and Performing Arts) "HAR2013-47778IR, the state program of R & D + i, of the Ministry of Research, Development and Innovation Ministry of Economy and Competitiveness of the call 2013., [ES] La presencia de la “pantalla” tanto en cine como en televisión es un espacio convencional de la proyección audiovisual. Sin embargo estas pantallas convencionales son una más de las posibilidades exploradas por los artistas del medio desde los inicios de las proyecciones audiovisuales. La exploración de pantallas no convencionales es la práctica habitual desde el inicio de la historia de las proyecciones hasta el momento presente. La aparición de las técnicas de videomapping asociadas a las tecnologías digitales han dado un salto cualitativo abriendo posibilidades, participación del público, edición y remezcla digital “in live”, uso del espacio público como espacio de proyección, etc ., permitiendo el despliegue de numerosos recursos expresivos y ampliado las opciones y posibilidades de las proyecciones. Esta ampliada capacidad de experimentación presenta en ocasiones puntos en común con experiencias pre-digitales que forman un conjunto de referencias e hitos. El objetivo de este ensayo es recoger parte de estas referencias fundamentales que vinculan las investigaciones de la época analógica con las exploraciones más actuales, a partir de la experiencia del grupo de investigación Laboratorio de Luz - UPV. Este trabajo forma parte del proyecto “Pantallas mutantes. La proyección audiovisual interactiva con técnicas de mapping en espacios no convencionales (espacio público, instalaciones artísticas y artes escénicas)” HAR2013-47778-R, del programa estatal de I+D+i, de la Secretaría de Estado de Investigación, Desarrollo e Innovación del Ministerio de Economía y Competitividad de la convocatoria 2013., Este trabajo forma parte del proyecto “Pantallas mutantes. La proyección audiovisual interactiva con técnicas de mapping en espacios no convencionales (espacio público, instalaciones artísticas y artes escénicas)” HAR2013-47778-R, del programa estatal de I+D+i, de la Secretaría de Estado de Investigación, Desarrollo e Innovación del Ministerio de Economía y Competitividad de la convocatoria 2013.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Throughput Analysis and Optimization of Multi-layer FFR-aided OFDMA Networks

  • Garcia-Morales, Jan
  • Femenias, Guillem
  • Riera-Palou, Felip
  • Thompson, John S.
[EN] In OFDMA networks, the use of universal frequency reuse plans improves cell capacity but causes very high levels of inter-cell interference (ICI), particularly affecting users located in the cell-edge regions.In order to mitigate ICI while achieving high spectral efficiencies, fractional frequency reuse (FFR) shows a good tradeoff between cell-edge throughput and overall cell spectral efficiency.Recently, multi-layer FFR-aided OFDMA-based designs, splitting the cell into inner, middle and outer layers have been proposed and studied with the aim of increasing the spectrum utilization and improving the user fairness throughout the cell.This paper presents an analytical framework allowing the performance evaluation and optimization of multi-layer FFR designs in OFDMA-based networks.Tractable mathematical expressions of the average cell throughput as well as the layer spectral efficiency have been derived for both proportional fair (PF) and round robin (RR) scheduling policies., Work supported by the Agencia Estatal de Investigacion and Fondo Europeo de Desarrollo Regional (AEI/FEDER, UE) under project ELISA (subproject TEC2014-59255-C3-2-R), Ministerio de Economía y Competitividad (MINECO), Spain, and the Conselleria d’Educacio, Cultura i Universitats (Govern de les Illes Balears) under grant FPI/1538/2013 (co-financed by the European Social Fund). The research leading to these results has also received funding from ”la Caixa” Banking Foundation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Convective air drying of brown seaweed Bifurcaria bifurcata in thin layer configuration

  • Arufe-Vilas, Santiago
  • Sineiro, Jorge
  • Chenlo, Francisco
  • Moreira, Ramón
[EN] Air drying kinetics of Bifurcaria bifurcata brown seaweed at 35, 50, 60 and 75°C were determined. Experimental drying data were modelled using two-parameter Page model (n, k). Page parameter n was constant (1.28) at tested temperatures, but k increased significantly with drying temperature from 35 to 60ºC and was invariant at higher temperatures (up to 75ºC). Drying experiments allowed the determination of the critical moisture content of seaweed (1.6 ± 0.2 kg water (kg d.b.)−1). Mass transfer coefficients during constant drying rate period and effective coefficients of water diffusion during falling drying rate period were evaluated, assuming cyclindrical geometry and considering volumetric shrinkage., The authors acknowledge the financial support of the Ministry of Economy and Competitiveness of Spain and European Regional Development Fund (ERDF) of European Union by the research project (CTQ 2013-43616/P).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Indexation and analysis of a parallel corpus using CQPweb: The COVALT PAR_ES Corpus (EN/FR/DE&gt, ES)

  • Molés-Cases, Teresa|||0000-0002-2829-8369
  • Oster, Ulrike
This contribution presents a section of the Corpus Valencià de Literatura Traduïda (COVALT), created by the research group of the same name (Department of Translation and Communication, Universitat Jaume I, Spain). The COVALT corpus is a four-million word corpus made up of narrative works originally written in English, French, and German and their Catalan translations published in the autonomous community of Valencia between 1990 and 2000. Since the members of the COVALT group are interested in translation research, and more specifically in the investigation of translated Catalan and Spanish, this corpus has recently been extended to include translations into Spanish published in Spain (COVALT PAR_ES corpus). This chapter presents the COVALT PAR_ES corpus, as well as its process of compilation and analysis with CQPweb., This study was supported by research projects FF12015-68867-P, funded by the Spanish Ministry of the Economy and Competitiveness, and by P1-1B2013-44, funded by Universitat Jaume I.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Reducing relative termination to dependency pair problems

  • Iborra, José
  • Nishida, Naoki
  • Yamada, Akihisa
  • Vidal, Germán|||0000-0002-1857-6951
Relative termination, a generalized notion of termination, has been used in a number of different contexts like proving the confluence of rewrite systems or analyzing the termination of narrowing. In this paper, we introduce a new technique to prove relative termination by reducing it to dependency pair problems. To the best of our knowledge, this is the first significant contribution to Problem #106 of the RTA List of Open Problems. The practical significance of our method is illustrated by means of an experimental evaluation., Germán Vidal is partially supported by the EU (FEDER) and the Spanish Ministerio de Economía y Competitividad under grant TIN2013-44742-C4-R and by the Generalitat Valenciana under grant PROMETEOII201/013. Akihisa Yamadais supported by the Austrian Science Fund (FWF): Y757
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Influencia de las variaciones en los materiales sobre la reología de hormigones autocompactantes reciclados

  • González Taboada, Iris
  • González Fonteboa, Belen
  • Martinez Abella, Fernando
  • Rojo López, Gemma
[ES] Este trabajo se centra en el análisis de la influencia de las variaciones de materiales sobre el comportamiento reológico de los hormigones autocompactantes fabricados con árido grueso reciclado. Se diseña un hormigón autocompactante patrón y tres reciclados con porcentajes de sustitución del 20%, 50% y 100% en volumen. Asimismo, en cada una de estas mezclas se aplican variaciones en el contenido de agua, superplastificante y cemento para simular los errores que se producen en las plantas de fabricación: ± 3% en el agua, ± 5% en el superplastificante y ± 3% en el cemento. Todos los hormigones se estudian en estado fresco mediante los ensayos reológicos stress growth test y flow curve test. Mediante reógrafos se evalúan los cambios reológicos que los incrementos o decrementos de agua, superplastificante o cemento pueden ocasionar. Los resultados permiten estudiar a qué variación de material es más sensible un hormigón autocompactante reciclado (HACR) y qué porcentajes de árido reciclado sería más recomendable utilizar para obtener un hormigón robusto., Este estudio es parte de los proyectos (a) “Investigación industrial sobre Hormigones para un Mercado Sostenible (InHorMeS)” financiado por la Axencia Galega de Innovación (Ref: IN852A 2013/57); y (b) “Hormigones reciclados autocompactantes robustos: reología en estado fresco y propiedades mecánicas (HORREO)” financiado por el Ministerio de Economía y Competitividad (Ref: BIA2014-58063-R). Además, este trabajo fue posible gracias al apoyo de una beca predoctoral de la Xunta de Galicia (España).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Design of conceptual maps for Massive Open Online Courses (MOOCS)

  • Barrachina, Xavier
  • Murillo Arcila, Marina
  • Conejero, J. Alberto|||0000-0003-3681-7533
  • Jordan-Lluch, Cristina|||0000-0001-9608-2984
Massive Open Online Courses have opened a new perspective for learning. The fragmentation of their contents made them easier to follow and permits a faster access to each single video where a content is presented. Nevertheless, this fragmentation is also a handicap in order to set the connections between different contents. We propose the use of concept maps for showing the interconnection of the contents of the course. These maps are elaborated by the teachers and offered as a material of the course. We also expect that these maps will facilitate a deeper learning and the retention of the students in the course., The development of the MOOC and this research has been supported by the Departamento de Matemática Aplicada of the Universitat Politècnica de València under the project Aplicaciones de la Teoría de Grafos a la vida real, within the call Ayudas para proyectos de innovación docente en el DMA de la UPV (PID-DMA 2013).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Effect of air drying temperature on phytochemical properties of brown seaweed Bifurcaria bifurcata

  • Arufe, Santiago
  • Sineiro, Jorge
  • Chenlo, Francisco
  • Moreira, Ramón
[EN] The purpose of this study was to determine the effects of convective air-drying at different temperatures (35, 50, 60 and 75°C) on the color of Bifurcaria bifurcata (BB) seaweed powders obtained after milling, the antioxidant activity and polyphenolic and carbohydrate content of the aqueous extracts obtained by ultrasound-assisted extraction. BB seaweed powders exhibited significant color differences between powders obtained from BB dried at 35ºC (yellowish-green) and 50–75 °C (brown). High air drying temperature (above 60ºC) significantly reduced the total polyphenolic, carbohydrate content and scavenging activity of aqueous extracts of BB., The authors acknowledge the financial support of the Ministry of Economy and Competitiveness of Spain and European Regional Development Fund (ERDF) of European Union by the research project (CTQ 2013-43616/P).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Diseño y evaluación de un servicio OpenFlow de provisión de Calidad de Experiencia sobre Mininet

  • Prieto Sánchez, Cristian
  • Andrés Maldonado, Pilar
  • Prados Garzón, Jonathan
  • Ramos-Munoz, Juan J.
[ES] Las redes definidas por software suponen unnuevo paradigma de red que potencialmente pueden pro-porcionar nuevas soluciones para proporcionar calidad deexperiencia.En este trabajo se propone un diseño de aplicación deredes definidas por software para proveer calidad de experi-encia a flujos con distintos requisitos de red. Esta aplicaciónse implementa en OpenDayLight, una implementación dereferencia, y se ejecuta en el emulador Mininet.En este artı́culo se detallan los algoritmos implementadospara proporcionar la aplicación para OpenDayLight., Este trabajo esta parcialmente financiado por el Ministerio de Economía, Industria y Competitividad y el Fondo Europeo de Desarrollo Regional FEDER (proyectos TEC2016-76795-C6-4-R y TIN2013-46223-P)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Producción de sentido y proceso de trabajo en el videomapping kavafisVives, Production of meaning and work process in videomapping kavafisVives

  • Martínez Arroyo, Emilio
  • Gracia Bensa, Trinidad
  • Giner Martínez, Francisco|||0000-0002-2741-4428
  • García Miragall, Carlos Manuel|||0000-0003-2067-3598
[EN] KavafisVives is an audiovisual production that was projected in October 2016 at the Cloister of the Centro Cultural La Nau in Valencia, on the occasion of the parallel activities held at the event “Mostra del Mediterrani 2016: Cultura i conflictes del Mediterrani”. Realized by the research group Laboratorio de Luz of the UPV within the research project "Mutant Screen" funded by MINECO HAR2103`47778R. The project starts from an interpretation of the theme "culture and conflicts of the Mediterranean", which tries to connect the roots of Mediterranean culture with the emergence of the present moment and the physical place on which this audiovisual will be projected. Starting from the poetic work of Constantino Kavafis that approaches the journey and the sea as a place of encounter, separation, loss and life from the vital subjectivity, we try to generate a discourse of the recent crisis of refugees who try to cross that same sea until Europe, fleeing from barbarism towards a possible future. The projection takes place in the Cloister of the Cultural Center La Nau, in Valencia, whose center is the stature of Lluis Vives, humanist whose intellectual integrity and work are linked to the best virtues of the European spirit. KavafisVives is a video mapping made by an interdisciplinary group of artists whose initial premise was to create a narrative away from the spectacular tone of some video mapping productions, maintaining a sobriety tone that allows to approach with respect to the current situation, from the Reflection of the Europeanist discourse of Lluis Vives and the poetic subjectivity of Constantino Kavafis., [ES] KavafisVives es una producción audiovisual que fue proyectada en octubre de 2016 en el Claustro del Centro Cultural La Nau, en Valencia, con motivo de las actividades paralelas realizadas en el evento Mostra viva del Mediterrani 2016: cultura i conflictes del Mediterrani. Realizado por el grupo de investigación Laboratorio de Luz de la UPV dentro del proyecto de investigación “Pantallas mutantes” financiado por MINECO HAR2103-47778R. El proyecto parte de una interpretación del tema “cultura i conflictes del Mediterrani”, que intenta conectar las raíces de la cultura del Mediterráneo, con la emergencia del momento actual y el propio lugar físico sobre el que se proyectará este audiovisual. A partir de la obra poética de Constantino Kavafis que aborda el viaje y el mar como lugar de encuentro, separación, perdida y vida, desde de la subjetividad vital, intentamos generar un discurso de las recientes crisis de refugiados que intentan cruzar ese mismo mar hasta Europa, huyendo de la barbarie hacia un futuro posible. La proyección se realiza en el Claustro del Centro Cultural La Nau, en Valencia, en cuyo centro se encuentra la estatura de Lluis Vives, humanista cuya integridad intelectual y obra están vinculadas a los mejores virtudes del espíritu europeísta. KavafisVives es un vídeo mapping realizado por un grupo de artistas interdisciplinar cuya premisa inicial era la de crear una narrativa alejada del tono espectacular de algunas producciones de vídeo mapping, que mantenga un tono de sobriedad que permita aproximarse con respeto a la situación actual, desde la reflexión del discurso europeísta de Lluis Vives y de la subjetividad poética de Constantino Kavafis., Realized by the research group Laboratorio de Luz of the UPV within the research project "Mutant Screen" funded by MINECO HAR2103-47778R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Thermodynamic model of Ca(II)-alginate beads drying by spectrophotometry

  • Santagapita, Patricio
  • Traffano Schiffo, María Victoria
  • Castro Giraldez, Marta|||0000-0001-9360-6869
  • Fito, Pedro J.|||0000-0001-9666-276X
[EN] The purpose of this work was to study the drying process of Ca(II)-alginate beads with/without sucrose, monitored by infrared thermography (IRT), in order to describe the critical points and the transformations suffered by the systems. Beads were obtained by the drop method and the drying process was performed at 40 ºC and 1.5 m/s. IRT was measured by a thermal imager Optris PI® 160. Mass, aw, xw and volume were also obtained. It was demonstrated that IRT is a good monitoring tool, able to analyzed heat transfer in colloidal systems. A thermodynamic model able to predict the mechanical phenomena of the beads throughout drying process has been developed., The authors acknowledge the financial support from the Spanish Ministerio de Economía, Industria y Competitividad, AGL2016-80643-R, Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) and Agencia Nacional de Promoción Científica y Tecnológica (ANPCyT PICT 2013 0434 and 2013 1331), CIN–CONICET (PDTS 2015 n° 196). A special thanks to the Consejo Nacional de Investigaciones Científicas y Técnicas of Argentina for the posdoc grant of Patricio Santagapita.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Envisioning Future Playful Interactive Environments for Animals

  • Pons Tomás, Patricia
  • Catalá Bolós, Alejandro
  • Jaén Martínez, Francisco Javier|||0000-0002-8815-9643
Play stands as one of the most natural and inherent behavior among the majority of living species, specifically humans and animals. Human play has evolved significantly over the years, and so have done the artifacts which allow us to play: from children playing tag games without any tools other than their bodies, to modern video games using haptic and wearable devices to augment the playful experience. However, this ludic revolution has not been the same for the humans’ closest companions, our pets. Recently, a new discipline inside the human–computer interaction (HCI) community, called animal–computer interaction (ACI), has focused its attention on improving animals’ welfare using technology. Several works in the ACI field rely on playful interfaces to mediate this digital communication between animals and humans. Until now, the development of these interfaces only comprises a single goal or activity, and its adaptation to the animals’ needs requires the developers’ intervention. This work analyzes the existing approaches, proposing a more generic and autonomous system aimed at addressing several aspects of animal welfare at a time: Intelligent Playful Environments for Animals. The great potential of these systems is discussed, explaining how incorporating intelligent capabilities within playful environments could allow learning from the animals’ behavior and automatically adapt the game to the animals’ needs and preferences. The engaging playful activities created with these systems could serve different purposes and eventually improve animals’ quality of life., This work was partially funded by the Spanish Ministry of Science andInnovation under the National R&D&I Program within the projects Create Worlds (TIN2010-20488) and SUPEREMOS (TIN2014-60077-R), and from Universitat Politècnica de València under Project UPV-FE-2014-24. It also received support from a postdoctoral fellowship within theVALi+d Program of the Conselleria d’Educació, Cultura I Esport (Generalitat Valenciana) awarded to Alejandro Catalá (APOSTD/2013/013). The work of Patricia Pons has been supported by the Universitat Politècnica de València under the “Beca de Excelencia” program and currently by an FPU fellowship from the Spanish Ministry of Education, Culture, and Sports (FPU13/03831).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Resistencia de los hormigones elaborados con árido reciclado frente a ciclos de hielo-deshielo

  • Juan Valdés, Andrés
  • Rodríguez Robles, Desirée
  • García González, Julia
  • Morán del Pozo, Julia Mª
  • Guerra Romero, Manuel
  • De Belie, Nele
[ES] Los prometedores resultados alcanzados por los hormigones que incorporan áridos reciclados procedentes de hormigón en el sector de los pavimentos, han fomentado el interés por aumentar el espectro de materiales susceptibles de ser reciclados. Atendiendo al significativo volumen que supone en países como España y Portugal la fracción cerámica del total de los residuos de construcción y demolición, este estudio analiza el comportamiento de los hormigones que incorporan áridos reciclados mixtos y cerámicos frente a ciclos de hielo-deshielo. Para ello se elaboran 3 tipos de hormigón: un hormigón convencional con árido 100% natural, un hormigón reciclado donde el 50% del árido grueso natural es sustituido por árido reciclado mixto, y otro hormigón reciclado, donde el porcentaje de sustitución se mantiene en 50%, pero se utiliza árido reciclado cerámico. Los resultados alcanzados demuestran que las caras moldeadas de los hormigones reciclados mantienen los niveles de resistencia a hielo-deshielo experimentados por el hormigón convencional cuando el porcentaje de material cerámico es bajo, y superan dichos niveles cuando el porcentaje de cerámica aumenta. En las superficies enrasadas, la presencia de árido reciclado supone una pérdida de resistencia a los ciclos de hielo-deshielo, siendo menos intensa esta pérdida cuanto mayor es el contenido cerámico., Este artículo ha sido desarrollado gracias a la financiación del Ministerio de Economía y Competitividad a través del proyecto BIA2013-48876-C3-3-R, así como de la ayuda FPI BES-2011-047159 asociada al proyecto BIA2010-21194-C03-02. También se agradece la financiación del Ministerio de Educación, Cultura y Deporte por la ayuda FPU AP2010- 0613. Finalmente, los autores agradecen la desinteresada participación de las empresas TEC-REC de Madrid y Bierzo Recicla de Castilla y León.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Emotional maps: neuro architecture and design applications

  • Higuera Trujillo, Juan
  • Rojas, Juan
  • López Tarruella Maldonado, Juan
  • Marín-Morales, Javier|||0000-0003-1271-2892
[EN] Neurophysiological measurements have increased in Design and Architecture to emotionally assess products. Objective understanding of emotion states brings an enormous opportunity to explain how environments aspects affects persons. New methodology must be developed for a successfully approach between Neuroscience and design areas, in order to build this recent synergy. This paper contribute to profound concept of Emotional Maps (EM), which is a challenge for two reasons: the characterization of emotional states and the uncertain relation with maps illustrations. In order to create an EM, Heart Rate Variability (HRV) was used to detect certain emotional states and Virtual Reality (VR) to generate an environment condition. The study was conducted by VR environment displayed in Head-mounted Display Oculus DK2. Twelve persons participated in data acquisition by two tools: during environment exploration, a portable physiological device (Empatica E4) recorded HRV signal; and at the end of study, a Likert scale questionnaire collected emotional impressions. HRV signal was analyze in time-frequency to detect activation or relax levels. The statistics results prove that design guidelines used in environments evoked the stressful state sought, and that the physiological measure used are appropriate to be represented. The final result shows the possibility to mapping emotional states. This novel technique allows to quantify objectively a subjective experience and locate in specific place when occurs. Our technique supposes a contribution toward emotional states measurements applied to design and architecture., Este trabajo de investigación ha sido financiado por el Ministerio de Economía y Competitividad (proyecto TIN2013-45736-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

A Generalized Model for Algorithmic Debugging

  • Insa Cabrera, David
  • Silva, Josep|||0000-0001-5096-0008
Algorithmic debugging is a semi-automatic debugging technique that is present in practically all mature programming languages. In this paper we claim that the state of the practice in algorithmic debugging is a step forward compared to the state of the theory. In particular, we argue that novel techniques for algorithmic debugging cannot be supported by the standard internal data structures used in this technique, and a generalization of the standard definitions and algorithms is needed. We identify two specific problems of the standard formulation and implementations of algorithmic debugging, and we propose a reformulation to solve both problems. The reformulation has been done in a paradigm-independent manner to make it useful and reusable in different programming languages., This work has been partially supported by the EU (FEDER) and the Spanish Ministerio de Economía y Competitividad (Secretaría de Estado de Investigación, Desarrollo e Innovación) under Grant TIN2013-44742-C4-1-R and by the Generalitat Valenciana under Grant PROMETEOII/2015/013. David Insa was partially supported by the Spanish Ministerio de Educación under FPU Grant AP2010-4415.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

VELOCIDAD DE OPERACIÓN DE VEHÍCULOS LIGEROS EN CURVAS DE CARRETERAS CONVENCIONALES

  • García Jiménez, María Elena
  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • Llopis-Castelló, David|||0000-0002-9228-5407
  • García García, Alfredo|||0000-0003-1345-3685
[ES] La velocidad de operación es uno de los factores más estudiados en el análisis de la seguridad vial por su relación con la siniestralidad. En la fase de explotación es relativamente sencillo calcular la velocidad de operación a partir de datos empíricos, pero, en las fases de planeamiento y de proyecto, sólo será posible estimarla. Numerosos autores han modelizado la velocidad de operación de vehículos ligeros en curvas de carreteras convencionales considerando su velocidad mínima. Algunos a partir de observaciones en aquellos puntos de la carretera más significativos como el punto medio de la curva (velocidad mínima), otros a partir de datos continuos utilizando, por ejemplo, dispositivos GPS. La mayoría de los modelos que estiman esta velocidad se basan únicamente en el percentil 85 de la distribución o en su velocidad media. Además, la mayoría de los estudios asumen que sus datos se distribuyen según una normal sin, en muchos casos, comprobar dicha hipótesis. El objetivo de este estudio es analizar la distribución de la velocidad desarrollada por vehículos ligeros circulando en condiciones de flujo libre en curvas de carreteras convencionales. Para ello, la investigación se basa en determinar si los datos de velocidad de 63 curvas disponibles de una base de más de 16.000 vh·km se distribuyen según una normal, y en el análisis del comportamiento de la media y la desviación típica de la distribución de velocidades en curvas. Se ha concluido que la distribución normal no es la que mejor se ajusta al comportamiento de la velocidad en la mayoría de los casos., El estudio que se ha presentado es parte del proyecto de investigación “CASEFU – Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales” (TRA2013- 42578-P), subvencionado por el Ministerio de Economía y Competitividad y el Fondo Social Europeo. Asimismo, los autores quieren agradecer al Centro de Estudios y Experimentación de Obras Públicas (CEDEX) del Ministerio de Fomento por subvencionar la investigación en la que se llevó a cabo la toma de datos, a la Dirección General de Obras Públicas, Transporte y Movilidad de la Conselleria de Vivienda, Obras Públicas y Vertebración del Territorio, a la Diputación de Valencia, y al Ministerio del Interior, especialmente a la Dirección General de Tráfico, por su colaboración en la toma de datos.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

ANÁLISIS DEL COMPORTAMIENTO DE CONDUCTORES EN CURVAS DE BAJO ÁNGULO DE DEFLEXIÓN

  • Ulpiano Cogollos, José Luis
  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • García García, Alfredo|||0000-0003-1345-3685
[ES] Las curvas con un bajo ángulo de deflexión pueden ser un problema para la percepción por parte de los conductores. Para evitar este aspecto, las diferentes normativas establecen criterios de desarrollo o radios mínimos, que las haga apreciables por los conductores. Los criterios que están incorporados en las normativas españolas nunca tuvieron una base experimental científica sino fueron fruto de juicios técnicos. Los objetivos de esta investigación son analizar la percepción subjetiva y caracterizar la respuesta de los usuarios de carreteras convencionales ante curvas de bajo ángulo de deflexión, para conseguir unas recomendaciones de diseño para este tipo de curvas. Estas curvas se restituyen geométricamente con el objetivo de identificar cuál servirá para un posterior estudio más detallado in situ. Para ello se presenta el diseño y desarrollo de un cuestionario online, el cual incorpora una base de datos de curvas de bajo ángulo de deflexión presentes en carreteras convencionales españolas. El cuestionario consiste en mostrar a un amplio número de conductores una serie de vídeos aleatorios donde se visualiza, desde el punto de vista del usuario de la carretera, el recorrido de varias de las curvas. Tras este paso, los encuestados deben expresar su percepción y comportamiento a través de varias preguntas de tipo abierto y cerrado. Estos resultados quedan registrados en una base de datos, para su posterior filtrado, tratamiento e interpretación estadística., La presente investigación es parte del proyecto “CASEFU – Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales” (referencia TRA2013-42578- P), que pretende actualizar el modo en el que se diseñan las carreteras convencionales en España atendiendo a criterios de operación, seguridad y funcionalidad. Dicho proyecto está financiado por el Fondo Social Europeo y el Ministerio de Economía y Competitividad.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Análisis y Validación de la Consistencia en un Simulador de Conducción

  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • Marín-Morales, Javier|||0000-0003-1271-2892
  • Llopis-Castelló, David|||0000-0002-9228-5407
  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • García García, Alfredo|||0000-0003-1345-3685
[ES] Muy diversas investigaciones previas han mostrado cómo la percepción del riesgo afecta el comportamiento de los conductores. Muchas de ellas van dirigidas a observar la diferencia de percepción entre conductores experimentados y noveles, o entre el riesgo objetivo y el percibido. Mientras que el riesgo objetivo puede ser obtenido a partir de las estadísticas de siniestralidad, el riesgo percibido es más complicado de evaluar. Existen diversos métodos, yendo desde la encuesta directa hasta técnicas de rastreo de la visión.En este estudio se presenta una nueva metodología para recoger datos de Percepción Subjetiva de Riesgo (PSR) de forma quasi-naturalística. Con esta metodología, los conductores pueden indicar de forma sencilla su percepción de confort tras recorrer cada una de las curvas que compone un trazado. Posteriormente, la correlación de estos datos con la geometría de las curvas y otras variables permite derivar sencillas reglas para obtener un diseño consistente de la carretera. Igualmente, si esta metodología es válida para ser llevada a cabo en un entorno simulado, permitiría evaluar carreteras en fase de proyecto, convirtiéndose en una valiosa herramienta para los ingenieros.Un total de 28 conductores participaron en la toma de datos, recorriendo el mismo tramo de carretera en la realidad y en entorno simulado, de 32 km. En ambos casos indicaron su percepción de PSR tras cada una de las curvas aisladas. En este estudio se muestran los resultados alcanzados, tanto en el entorno real como el simulado. Igualmente, se establecen conexiones y correlaciones entre ambos métodos, mostrando bajo qué condiciones el entorno simulado arroja valores válidos., Los autores quisieran agradecer a la Universitat Politècnica de València (UPV), que financió el proyecto de investigación “CONSIM - Desarrollo de un Modelo para la Evaluación de la Consistencia del Diseño Geométrico de Carreteras Convencionales mediante Simuladores de Conducción” (PAID 05-2012). Asimismo, agradecer también al Ministerio de Economía y Competitividad y al Fondo Social Europeo, que financiaron el proyecto de investigación “CASEFU - Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales” (TRA2013-42578-P), del cual forma parte este estudio.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Optimización de rutas para mejora de la eficiencia en la conducción

  • García Fernández, Roberto
  • Tuero, Alejandro
  • Pozueco, Laura
  • Pañeda, Xabiel
  • Corcoba, Victor
  • Sanchez, José A.
  • Melendi, David
  • Rionda, Abel
[ES] El sector del transporte es uno de los principales causantes de la emisión de partículas contaminantes del medioambiente. Entre las diferentes alternativas para la reducción de consumo y de emisión de partículas nocivas la más atractiva para las empresas de transporte profesional es la utilización de técnicas de conducción eficiente ya que permite aprovechar la flota de vehículos existente sin necesidad de invertir en nuevos vehículos y tecnología. En este trabajo se ha determinado cuál sería la técnica óptima de conducción para minimizar el consumo de combustible en una ruta. Los resultados pueden aplicarse en cursos de formación en conducción eficiente. Para los cálculos se han tomado datos reales de una flota profesional de autobuses, se ha obtenido un modelo de consumo y mediante optimización de rutas se ha determinado la técnica de conducción que minimiza el consumo en la ruta analizada. Los resultados indican que la conducción eficiente tiene una influencia muy significativa en el consumo de combustible. Con una conducción óptima podrían alcanzarse reducciones en el consumo de hasta 15 litros/100km, un 28% menos, en la ruta analizada, lo cual redunda en una reducción notable de consumo en el global de la compañía, considerando las grandes distancias recorridas por los profesionales del sector del transporte., Este trabajo ha sido financiado por la Comisión Europea (proyecto GlobalBLED SMEInst-10-2016- 2017), el Plan Nacional de Investigación (proyecto MINECO-13-TIN2013-41749-R) y el Plan PCTI del Principado de Asturias (proyecto GRUPIN-14-065).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Rúbrica para la Evaluación de la Competencia Innovación, Creatividad y Emprendimiento en máster

  • Cuenca, L.|||0000-0003-3589-4182
  • Alarcón Valero, Faustino|||0000-0002-0783-3932
  • Boza, Andres|||0000-0002-5429-0416
  • Fernández-Diego, Marta|||0000-0001-7340-2789
  • Ruiz Font, Leonor
  • Poler, R.|||0000-0003-4475-6371
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Gordo Monzó, Mari Luz
[EN] Innovation has a special value for the survival and development of organizations, especially in a changing context. To develop the innovation, creativity and entrepreneurship capacities in students enhances their skills. A competency describes what training participants should be able to do at the end of the training. The competence is acquired through various learning outcomes to be achieved. Competition in innovation is closely related to the ability to propose and imple-ment creative ideas to solve problems, ability to create and maintain connections work, etc. In this article is presented a method for measuring the competence of innovation, creativity and entrepreneurship in master degree by introducing different levels of scope., [ES] La innovación tiene un especial valor para la supervivencia y el desarrollo de las organizaciones, más aún en un contexto de permanente cambio. El desarrollo de la capacidad de innovación en los estudiantes favorece su capacidad de inserción en el mundo laboral. Una competencia describe lo que los participantes en la formación deben ser capaces de hacer al final de dicha formación. La competencia es adquirida a través de varios resultados de aprendizaje a alcanzar. La competencia en innovación está estrechamente relacionada con la capacidad para proponer y aplicar ideas creativas para resolver problemas, capacidad de crear y mantener conexiones de trabajo, etc. En este artículo ser presenta un método para medir la competencia de innovación creatividad y emprendimiento en el nivel de máster mediante la introducción de diferentes niveles de alcance a través de una rúbrica., La investigación se ha llevado a cabo en el marco de los proyectos de innovación para la mejora educativa (PIME/2013/A/016/B) 'RECICRE – Rúbrica para la evaluación de la competencia de innovación y mejora educativa y el proyecto OAICE (Objetos de aprendizaje para la Competencia Innovación, Creatividad y Emprendimiento.)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Respuesta frente a cargas estáticas y frente a explosiones en hormigones de alta resistencia reforzados con fibras

  • Zerbino, Raul
  • Giaccio, Graciela
  • Torrijos, Maria
  • Luccioni, Bibiana
  • Isla, Facundo
  • Codina, Ramón
  • Ambrosini, Daniel
[ES] Los Hormigones de Alta Resistencia Reforzados con Fibras aparecen como materiales promisorios para construir elementos de protección o estructuras expuestas a acciones extremas. Este trabajo analiza el efecto de la incorporación de diferentes contenidos y tipos de fibras de acero en hormigones autocompactantes de alta resistencia (resistencia media a compresión mayor a 100 MPa). Se analiza el efecto de distintos tipos y contenidos de fibras de acero sobre el comportamiento mecánico en flexión de prismas entallados y sobre la respuesta bajo cargas estáticas de losas cuadradas de 500 mm de lado y 50 mm de espesor. Luego se muestran resultados de las mismas losas al ser sometidas a cargas explosivas que evidencian la potencialidad del material ante acciones extremas; el refuerzo con fibras mantuvo la integridad de las piezas con una reducción significativa del daño y el cuadro de fisuración manifiesta gran capacidad de absorción de energía., Los autores agradecen la financiación de los proyectos PICT-2013-1740 2014-17, 11/I188 Secyt UNLP 2014-17 y CONICET PIP 2015-17, y a los técnicos Anabela Gerez y Pablo Bossio por su colaboración en el desarrollo del programa experimental. Asimismo se agradece a las firmas Cementos Avellaneda SA, Ferrocement SA, Sika Argentina SAIC, y Bekaert SA por su colaboración en el suministro de materiales para la fabricación de los hormigones.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Influence of liquid properties on ultrasonic atomization

  • Lozano, Antonio
  • García, Juan Antonio
  • Alconchel, Javier
  • Barreras, Félix
  • Calvo, Esteban
  • Santolaya, José Luis
[EN] Ultrasonic atomization is very convenient because it can generate droplets with diameters of a few microns and with very narrow size distribution. Besides, opposite to twin fluid nozzles, in ultrasonic atomization, droplet generation and transport are decoupled processes. Droplets are ejected from the liquid surface with very low velocities, so driving them is relatively simple. Although this atomization method is now common in some specific applications, for example in household humidifiers, there are still some details about the physics of this process that are not completely understood. Up to date, most of the published results have been limited to experiments with water. However, it has been demonstrated that atomization rates quickly decrease as liquid viscosity increases. This work analyzes the characteristics of ultrasonic atomization of some alternative fluids to determine if there is any influence of other physical properties such as surface tension or vapor pressure. Experiments are performed using a commercial piezoceramic disk with a resonance frequency of 1.65 MHz. The disk is excited with a sinusoidal signal with voltage amplitudes that go up to 60 V. Sprays are visually characterized analyzing instantaneous images and high speed video sequences. Besides atomization rates are calculated by measuring the weight loss in a fixed time., This work has been partially funded by the Secretariat of State for Research of the Spanish Ministry of Economy and Competitiveness under project DPI2013-45814-P. Support of the Regiona
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Der Ausdruck von Bewegungsereignissen in Übersetzungen vom Spanischen ins Deutsche

  • Molés-Cases, Teresa|||0000-0002-2829-8369
1. Der Ausgangspunkt dieser Veröffentlichung ist eine frühere Arbeit (Molés-Cases 2016), in der die Autorin den Ausdruck der Manner-Komponente von Bewegungsereignissen in Über- setzungen vom Deutschen ins Spanische in einem Korpus von Kinder- und Jugendliteratur untersucht hat. Die Ergebnisse dieser Arbeit bestätigen, dass bei der Übersetzung ins Spani- sche die Manner-Komponente in rund 30 % der Fälle nicht wiedergegeben wird. Dies ist auf unterschiedliche Faktoren zurückzuführen, wie die typologischen Unterschiede zwischen beiden Sprachen (Slobin 1996, 2005; Talmy 2000) und den Übersetzungsprozess (Mauranen / Kujamäki 2004). Im vorliegenden Beitrag soll eine Untersuchung vorgestellt werden, in der dasselbe Phänomen in der entgegengesetzten Übersetzungsrichtung (vom Spanischen ins Deutsche) untersucht wird. Die empirische Grundlage der Untersuchung ist in diesem Fall das deutsch-spanische Parallelkorpus PaGeS und das Ziel ist es, herauszufinden, ob die Man- ner-Komponente bei der Übersetzung ins Deutsche hinzugefügt wird.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Performances of moment resisting frames with slender composite sections in low-to-moderate seismic areas

  • Degée, Hervé
  • Duchêne, Yves
  • Hoffmeister, Benno
[EN] The aim of the recently completed European research program Meakado is therefore to study design options with requirements proportioned to the actual seismic context of constructions in areas characterized by a low or moderate seismic hazard, contrary to most researches aiming at maximizing the seismic performances. In this general framework, specific investigations have been carried out regarding typical beam profiles commonly used for multi-bay - multi-storey composite frames. In a first stage, experimental tests on class-3 composite beam-to-column connections were performed. The measurement results were evaluated with regard to the development of the hysteretic behavior with particular emphasis on the degradation. These test results have been used as reference for the calibration and validation of numerical model aiming at extending the scope of the experimental outcomes through appropriate parametric variations regarding the behavior of nodal connections as well as towards the global analysis and behavior of structures made of class 3 and 4 profiles. Numerical investigations of the global performance of composite frames with slender cross-sections are then performed resorting to the numerical model previously calibrated with respect to the experimental tests and additional simulations at node level. Results are compared to the performance of an equivalent frame made of compact steel profiles. Attention is paid to the effects of strength and stiffness degradation due to local buckling. The analysis of the results is specifically focusing on the comparison of the rotation capacity of the slender section with the actual rotation demand imposed by a moderate intensity earthquake. Based on the outcomes of these investigations, practical design recommendations are finally derived for multi-storey, multi-bay moment resisting frames with type b (full composite action) beam-to column connections located in low and moderate seismicity regions., The work summarized in this paper has been realized in the global framework of the RFCS research project Meakado “Design of steel and composite structures with limited ductility requirements for optimized performances in moderate earthquake areas” – grant agreement RFSR-CT-2013-00022.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Validación de un simulador de conducción de bajo coste para el diseño de carreteras convencionales

  • Llopis-Castelló, David|||0000-0002-9228-5407
  • Camacho-Torregrosa, Francisco Javier|||0000-0001-6523-7824
  • Pérez Zuriaga, Ana María|||0000-0002-8434-1106
  • Marín-Morales, Javier|||0000-0003-1271-2892
  • García García, Alfredo|||0000-0003-1345-3685
  • Dols Ruiz, Juan Francisco|||0000-0003-1815-1360
[ES] La cantidad de estudios de seguridad vial basados en simuladores de conducción está en continuo crecimiento. En este sentido, la Universitat Politècnica de València (UPV) ha desarrollado un simulador de conducción de bajo coste: SE2RCO (Simulador para la Evaluación, Entrenamiento y Rehabilitación de Conductores). El principal objetivo de la investigación es la validación de este simulador, con el fin de desarrollar estudios relacionados con la seguridad vial y el diseño geométrico de carreteras incorporando el factor humano. Dicha validación se ha realizado a partir de la observación en campo de los perfiles continuos de velocidad desarrollados por 28 voluntarios conduciendo su propio vehículo en un tramo de carretera convencional de 30 km. Los mismos voluntarios condujeron posteriormente en el simulador de conducción ese mismo tramo de carretera reconstruido en un entorno virtual. Un total de 79 curvas y 52 rectas fueron objeto de análisis. La comparación entre las velocidades desarrolladas en la realidad y las observadas durante la simulación permitieron llevar a cabo la validez objetiva del simulador de conducción. Los resultados mostraron que la velocidad media en el simulador y en la realidad era similar cuando la velocidad simulada era inferior a 87.3 km/h. En caso de ser superior, la velocidad media en la realidad era menor que en el simulador. En cuanto a la velocidad de operación, se observó que la velocidad real era aproximadamente 5 km/h menor que la simulada. Finalmente, estos resultados estuvieron apoyados por la percepción de los conductores, ya que la mayoría de ellos evaluaron la calidad del entorno simulado y el grado de similitud entre la tarea de conducción real y simulada como medio o alto, consiguiendo de esta manera la validez subjetiva del simulador de conducción., Los autores quisieran agradecer a la Universitat Politècnica de València (UPV), que financió el proyecto de investigación “CONSIM - Desarrollo de un Modelo para la Evaluación de la Consistencia del Diseño Geométrico de Carreteras Convencionales mediante Simuladores de Conducción” (PAID 05-2012). Asimismo, agradecer también al Ministerio de Economía y Competitividad y al Fondo Social Europeo, que financiaron el proyecto de investigación “CASEFU - Estudio experimental de la funcionalidad y seguridad de las carreteras convencionales” (TRA2013-42578-P), del cual forma parte este estudio.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Evaluación de la interacción entre atención visual y memoria de trabajo: un estudio basado en técnicas de eye-tracking

  • Conesa, Natalia
  • Balagué, Marta
  • Dempere-Marco, Laura
[ES] La memoria de trabajo (MT) nos permite mantener y manipular información cuando ya no está presente a los sentidos. Cuando los estímulos se muestran de forma secuencial se ha descrito la aparición de efectos de recencia (i.e. aquellos estímulos que se muestran en las últimas posiciones de la secuencia son retenidos en MT con mayor probabilidad). La hipótesis principal que subyace este estudio es que la atención visual modula la codificación de información visual durante la fase de estimulación de MT. Nuestros resultados muestran que el efecto de recencia surge incluso cuando los estímulos se muestran de forma simultánea, de modo que determinan qué estímulos entran y son mantenidos en MT. Este efecto es consecuencia de la asignación de atención visual a los diferentes elementos durante la fase de estimulación de la tarea visual, ilustrando así el importante rol de la interrelación entre atención visual y MT., [EN] Working memory (WM) allows us to hold and manipulate information when it is no longer present to the physical senses. When stimuli are displayed sequentially, recency effects (i.e. stimuli presented later in the sequence are more likely held in WM) have been reported in visual WM. The main hypothesis that guides this study is that visual attention modulates the codification of visual information during the encoding phase of WM. Our results show that the recency effect emerges even when stimuli are shown simultaneously, thus affecting which stimuli enter and are maintained in WM. This effect emerges from the allocation of visual attention to the different items during the stimulation phase of the task, thus illustrating the important role of the interplay between visual attention and WM., Las autoras agradecen a Laura Portell su colaboración en el proyecto de investigación en el marco del cual contribuyó en el diseño del protocolo experimental de la tarea DMS. Esta investigación ha sido posible gracias a la financión recibida por parte Ministerio de Ciencia e Innovación a través del proyecto TIN2013-40630-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Effect of excitation on gas centered swirl coaxial injectors

  • Park, Gujeong
  • Oh, Sukil
  • Bae, Jinhyun
  • Yoon, Youngbin
[EN] Studies on combustion instability in liquid rocket engines are important in improving combustion efficiency and preventing combustion chamber losses. To prevent combustion instability, methods such as baffles and cavities are used. The injector is located in the middle of the perturbation-propagation process in the rocket engine, so it is important to study the suppression of combustion instability using the design of the injector. Much research has been focused on the study of liquid excitation in a single injector; however, the actual injector used in a liquid rocket engine is a coaxial injector. In this study, the dynamic characteristics of a gas-centred swirl coaxial injector were investigated by varying the gap thickness and momentum-flux ratio. Spray photographs were captured by synchronizing a stroboscope and digital camera, and a high-speed camera and Xenon lamp were also used. To measure the liquid film, a measurement system was implemented using the electrical conductance method. For excitation of the gas, an acoustic speaker was used to impart a frequency to the gas. The gGas velocity and effect of excitation were measured by hot-wire anemometry. A mechanical pulsator was used for liquid flow excitation. Liquid fluctuation was measured by a dynamic pressure sensor. In both gas and liquid excitation cases, the gain increased as the gap thickness decreased and the momentum-flux ratio increased. From these results, it can be concluded that gap thickness and momentum-flux ratio are major factors in suppressing combustion instability., This work was supported by the Advanced Research Centre Program (NRF-2013R1A5A1073861) through a National Research Foundation of Korea (NRF) grant, funded by the Korean government (MSIP), and contracted through the Advanced Space Propulsion Research Centre at Seoul National University and was supported by an NRF (National Research Foundation of Korea) Grant funded by the Korean Government (NRF-2016-Fostering Core Leaders of the Future Basic Science Program/Global Ph.D. Fellowship Program).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

La saliencia de la manera en los eventos de desplazamiento. Propuesta de técnicas de traducción

  • Molés-Cases, Teresa|||0000-0002-2829-8369
Según han confirmado varios trabajos enmarcados en la Tipología semántica, el procesamiento y la codificación de la Manera de movimiento, así como los mecanismos lingüísticos de los que disponen los hablantes para expresarla y el esfuerzo cognitivo que éstos deben realizar para verbalizarla varía en función de la tipología lingüística (McNeill 2000, Özcal&#305;&#351;kan y Slobin 2000, 2003, Slobin 1996a, 1997, 2006). Este trabajo presenta las repercusiones que tienen factores como éstos en el ámbito de la traducción y estudia la traducción de la Manera en una serie de eventos de movimiento en un corpus paralelo alemán-español. Concretamente, parte de la base de que los listados de técnicas que se han propuesto tradicionalmente en los Estudios de Traducción resultan demasiado generales y propone un listado adaptado a este problema de traducción. Con ello pretende contribuir a la línea de investigación iniciada por Dan Slobin (2000) con la teoría del Thinking for translating y continuada por varias autoras, como por ejemplo, Cifuentes-Férez (2006), Filipovi&#263; (1999) o Ibarretxe-Antuñano (2003), quienes han incidido en la cuestión de las técnicas de traducción a partir del estudio de lenguas que presentan diferente grado de saliencia de la Manera (Slobin 2004)., Este trabajo ha sido posible gracias a los proyectos Refinamiento y sistematización del análisis del corpus COVALT a través de su preprocesamiento y ampliación mediante la inclusión de traducciones al castellano (FFI2012- 35239/FILO) del Ministerio de Educación de España y Los corpus en la enseñanza de la traducción. Ampliación y explotación didáctica del corpus COVALT (P1.1B2013-44) de la Universitat Jaume I (España) y también una ayuda para movilidad del personal investigador de la Fundació Caixa CastellóBancaixa ( Acción 2 del Plan de promoción a la investigación de la Universitat Jaume I para el curso 2013/2014 ) en el Max-Planck Institut für evolutionäre Anthropologie (Leipzig).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Influence of InfiniBand FDR on the performance of remote GPU virtualization

  • Reaño González, Carlos
  • Mayo Gual, Rafael
  • Duato Marín, José Francisco
  • Peña Monferrer, Antonio José
  • Quintana-Ortí, Enrique S.|||0000-0002-5454-165X
  • Silla, Federico|||0000-0002-6435-1200
The use of GPUs to accelerate general-purpose scientific and engineering applications is mainstream today, but their adoption in current high-performance computing clusters is impaired primarily by acquisition costs and power consumption. Therefore, the benefits of sharing a reduced number of GPUs among all the nodes of a cluster can be remarkable for many applications. This approach, usually referred to as remote GPU virtualization, aims at reducing the number of GPUs present in a cluster, while increasing their utilization rate. The performance of the interconnection network is key to achieving reasonable performance results by means of remote GPU virtualization. To this end, several networking technologies with throughput comparable to that of PCI Express have appeared recently. In this paper we analyze the influence of InfiniBand FDR on the performance of remote GPU virtualization, comparing its impact on a variety of GPU-accelerated applications with other networking technologies, such as Infini-Band QDR and Gigabit Ethernet. Given the severe limitations of freely available remote GPU virtualization solutions, the rCUDA framework is used as the case study for this analysis. Results show that the new FDR interconnect, featuring higher bandwidth than its predecessors, allows the reduction of the overhead of using GPUs remotely, thus making this approach even more appealing., This work was funded by the Generalitat Valenciana under Grant PROMETEOII/2013/009 of the PROMETEO program phase II. This work was supported in part by the U.S. Department of Energy under contract DE-AC02-06CH11357.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Influencia de la naturaleza y granulometría de los áridos en el comportamiento reológico de morteros de cementos activados alcalinamente

  • Gismera-Diez, Sara
  • Alonso, Maria del Mar
  • Puertas, Francisca
[ES] El objetivo de este trabajo es profundizar en el conocimiento del comportamiento reologico de morteros de cementos activados alcalinamente (Alkali-Activated Materials, AAMs), determinando el efecto del diámetro máximo del árido y su naturaleza (silíceo, calizo y árido reciclado). Morteros de OPC se utilizan de referencia. Se realizaron ensayos de fluidez y de Stress Growth Test; también se determinaron los parámetros reológicos por el ensayo de curva de flujo. Los morteros de AAMs son más sensible que los de OPC a la variación del diámetro máximo de los áridos; aunque no se han observado diferentes comportamientos asociados a la naturaleza del mismo. Se ha demostrado que todos los morteros se ajustan al modelo reológico de Bingham, independientemente del diámetro máximo de los áridos y de la naturaleza de los mismos., Este estudio fue financiado por el Ministerio de Economía (MINECO) bajo el Proyecto del plan Nacional BIA2013-47876-C2-1-P. Los autores desean agradecer a A. Gil, F. Morales y P. Rivilla por su ayuda con realización de las pruebas.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Multidimensional Prediction Models When the Resolution Context Changes

  • Martínez Usó, Adolfo
  • Hernández-Orallo, José|||0000-0001-9746-7632
Multidimensional data is systematically analysed at multiple granularities by applying aggregate and disaggregate operators (e.g., by the use of OLAP tools). For instance, in a supermarket we may want to predict sales of tomatoes for next week, but we may also be interested in predicting sales for all vegetables (higher up in the product hierarchy) for next Friday (lower down in the time dimension). While the domain and data are the same, the operating context is different. We explore several approaches for multidimensional data when predictions have to be made at different levels (or contexts) of aggregation. One method relies on the same resolution, another approach aggregates predictions bottom-up, a third approach disaggregates predictions top-down and a final technique corrects predictions using the relation between levels. We show how these strategies behave when the resolution context changes, using several machine learning techniques in four application domains., This work was supported by the Spanish MINECO under grants TIN 2010-21062-C02-02 and TIN 2013-45732-C4-1-P, and the REFRAME project, granted by the European Coordinated Research on Longterm Challenges in Information and Communication Sciences Technologies ERA-Net (CHIST-ERA), and funded by MINECO in Spain (PCIN-2013-037) and by Generalitat Valenciana PROMETEOII2015/013.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Boosting the performance of remote GPU virtualization using InfiniBand Connect-IB and PCIe 3.0

  • Reaño González, Carlos
  • Peña Monferrer, Antonio José
  • Shainer, Gilad
  • Schultz, Scot
  • Castello Gimeno, Adrián
  • Duato Marín, José Francisco
  • Silla, Federico|||0000-0002-6435-1200
  • Quintana-Ortí, Enrique S.|||0000-0002-5454-165X
[EN] A clear trend has emerged involving the acceleration of scientific applications by using GPUs. However, the capabilities of these devices are still generally underutilized. Remote GPU virtualization techniques can help increase GPU utilization rates, while reducing acquisition and maintenance costs. The overhead of using a remote GPU instead of a local one is introduced mainly by the difference in performance between the internode network and the intranode PCIe link. In this paper we show how using the new InfiniBand Connect-IB network adapters (attaining similar throughput to that of the most recently emerged GPUs) boosts the performance of remote GPU virtualization, reducing the overhead to a mere 0.19% in the application tested., This work was funded by the Generalitat Valenciana under Grant PROMETEOII/2013/009 of the PROMETEO program phase II. This material is based upon work supported by the U. S. Department of Energy, Office of Science, Advanced Scientific Computing Research (SC-21), under Contract No. DE-AC02-06CH11357. Authors from the Universitat Politècnica de València and Universitat Jaume I are grateful for the generous support provided by Mellanox Technologies.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Three-dimensionality in competencies: the inclusion of ethics in the generic competency of teamwork and leadership

  • Bañón Gomis, Alexis Jacobo
  • Lajara-Camilleri, Natalia|||0000-0002-1376-3133
  • Rovira, Andres|||0000-0001-8192-5571
  • Clemente-Císcar, Mónica
[EN] The context of the European Higher Education Area requires the alignment of teaching degrees and research projects on offer at university level with social and labor market needs. The purpose of this chapter is to provide a suffi cient base upon which scoring rubrics on teamwork and leadership can be established and/or expanded. Such rubrics will guide and assess not only what to do but also how must it be done. This approach will be built on both the classical Greek foundation of what constitutes action-praxis and poiesis-and on two areas of knowledge-management and ethics.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

¿Aprendo más trabajando solo o en pareja? ¿Aprendo más estando cerca o lejos de la pizarra?

  • Insa Cabrera, David
  • Tamarit Muñoz, Salvador
  • Silva, Josep|||0000-0001-5096-0008
[ES] Este artculo desarrolla un estudio estadstico a partir de un experimentorealizado en dos escuelas universitarias de la Universitat Politecnica deValencia. El objetivo principal del estudio es cuanticar como la distanciade los alumnos al profesor y la pizarra en el aula afecta a su rendimientoacademico. Un segundo objetivo pretende determinar si trabajar en parejao de manera individual tambien afecta al rendimiento. En el experimentohemos recogido y procesado informacion sobre la posicion exacta de cadaalumno en el aula y en el laboratorio durante dos cursos academicos.Tambien se registro cada cambio de posicion, as como sus notas en diferentesexamenes, cursos y asignaturas tanto de teora como de practicas.Nuestro experimento ha producido gran cantidad de datos que han sidoanalizados usando metodos estadsticos avanzados como ANOVA, el testHSD post-hoc de Tukey, y el test de Mantel basado en el coeciente decorrelacion producto-momento de Pearson., Proyecto financiado por EU (FEDER) y el Ministerio de Econom´ıa y Competitividad (TIN2013- 44742-C4-1-R), por la Generalitat Valenciana (PROMETEO-II/2015/013), y por la Universitat Polit`ecnica de Val`encia (PIME B16). Los autores agradecen el respaldo de la acci´on COST IC1405.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Innovation, creativitiy and entrepreneurship competence in higher education. Learning objectives and measurement

  • Boza, Andres|||0000-0002-5429-0416
  • Cuenca, L.|||0000-0003-3589-4182
  • Fernández-Diego, Marta|||0000-0001-7340-2789
  • Ruiz Font, Leonor
  • Alarcón Valero, Faustino|||0000-0002-0783-3932
  • Alemany Díaz, María Del Mar|||0000-0002-0992-8441
  • Poler, R.|||0000-0003-4475-6371
  • Gordo Monzó, Mari Luz
In the permanent change context, innovation has become a vital value for the survival and development of organisations. The development of this increasingly important value will help students to improve their skills and to adapt to their future jobs in accordance with required characteristics. Competency describes what training participants should be able to do at the end of such training. Competency is acquired through the various learning objectives to be achieved. Innovation competency is closely related to Self-assessment and the learning methods, Ability to work in interactive communication situations, Ability to create and maintain connections work, Ability to cooperate in a multidisciplinary and multicultural environment and Ability to communicate and interact in an international environment, etc. In this chapter, we develop a method for measuring the innovation competencies in higher education by introducing different levels of mastery., This research has been carried out under the project of innovation and educational improvement (PIME/2013/A/016/B) 'RECICRE - Rubrics for the Assessment of Innovation, Creativity and Enterprising Competence’ funded by the Universitat Politècnica de València and the School of Computer Science.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

General Overview of ImageCLEF at the CLEF 2016 Labs

  • Villegas, Mauricio
  • Mueller, Henning
  • Seco de Herrera, Alba Garcia
  • Schaer, Roger
  • Bromuri, Stefano
  • Gilbert, Andrew
  • Piras, Luca
  • Wang, Josiah
  • Yan, Fei
  • Ramisa, Arnau
  • Dellandrea, Emmanuel
  • Gaizauskas, Robert
  • Mikolajczyk, Krystian
  • Puigcerver I Pérez, Joan
  • Toselli, Alejandro Héctor|||0000-0001-6955-9249
  • Sánchez Peiró, Joan Andreu|||0000-0003-0423-2020
  • Vidal, Enrique|||0000-0003-4579-5196
This paper presents an overview of the ImageCLEF 2016 evaluation campaign, an event that was organized as part of the CLEF (Conference and Labs of the Evaluation Forum) labs 2016. ImageCLEF is an ongoing initiative that promotes the evaluation of technologies for annotation, indexing and retrieval for providing information access to collections of images in various usage scenarios and domains. In 2016, the 14th edition of ImageCLEF, three main tasks were proposed: 1) identification, multi-label classification and separation of compound figures from biomedical literature; 2) automatic annotation of general web images; and 3) retrieval from collections of scanned handwritten documents. The handwritten retrieval task was the only completely novel task this year, although the other two tasks introduced several modifications to keep the proposed tasks challenging., The general coordination and the handwritten retrieval task have been supported by the European Union (EU) Horizon 2020 grant READ (Recognition and Enrichment of Archival Documents) (Ref: 674943), EU project HIMANIS (JPICH programme, Spanish grant Ref: PCIN-2015-068) and MINECO/FEDER, UE under project TIN2015-70924-C2-1-R. The image annotation task is co-organized by the VisualSense (ViSen) consortium under the ERA-NET CHIST-ERA D2K 2011 Programme, jointly supported by UK EPSRC Grants EP/K01904X/1 and EP/K019082/1, French ANR Grant ANR-12-CHRI-0002-04 and Spanish MINECO Grant PCIN-2013-047. This research was supported in part by the Intramural Research Program of the National Institutes of Health (NIH), National Library of Medicine (NLM), and Lister Hill National Center for Biomedical Communications (LHNCBC).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Plataforma extremo-a-extremo compatible con el estándar HbbTV 2.0 para la TV híbrida y multi-dispositivo

  • Marfil, Daniel
  • Montagut Climent, Mario Alberto
  • Salvador Llàcer, Pau
  • Boronat, Fernando|||0000-0001-5525-3441
[ES] En este artículo se presenta una plataforma extremo-a-extremo para la generación, entrega y sincronización de contenidos híbridos (broadcast y broadband) relacionados, tanto en un mismo como en múltiples dispositivos (ej. escenario multi-pantalla). La plataforma es compatible con la versión más reciente del estándar Hybrid Broadcast Broadband TV (2.0.1) y, además, incluye soluciones eficientes para aspectos clave que no están especificados en dicho estándar, pero que son necesarios para la implantación satisfactoria de servicios de TV híbridos y multi-dispositivo, como: mecanismos de señalización para descubrir, asociar y describir los contenidos (híbridos) adicionales relacionados, mecanismos de interacción y negociación entre los dispositivos disponibles y soluciones de sincronización multimedia adaptativa (incluyendo protocolos, algoritmos y técnicas de ajuste) para alinear en el tiempo, de manera precisa, la presentación de los contenidos disponibles. La plataforma se ha evaluado objetiva y subjetivamente para el caso de uso de la TV multi-vista y multi-dispositivo, obteniendo resultados satisfactorios y prometedores., El trabajo ha sido financiando por el MINECO y FEDER con ref. TEC2013-45492-R. Agradecer a Samsung Electronics Iberia S.A. la prestación de los dispositivos para el desarrollo y evaluación de la plataforma.