Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 89
Encontrada(s) 1 página(s)

RIUMA. Repositorio Institucional de la Universidad de Málaga
Datos de investigación Set de datos (Dataset)

Encuesta participantes programa de voluntariado UMA. Arquitectura

  • Cimadomo, Guido
Encuesta realizada de forma anónima bajo invitación por mail a los participantes del programa. Se presentan los datos en pdf, siendo impresión de la hoja de respuestas de google forms, y en formato editable csv, sin editar., Colección de datos realizada a los participantes en el programa de voluntariado de la UMA en proyectos de arquitectura en Nicaragua, entre 2016 y 2025, con el objeto de recopilar información sobre las experiencias y resultados obtenidos en esta experiencia de aprendizaje servicio.
RIUMA. Repositorio Institucional de la Universidad de Málaga
Datos de investigación Set de datos (Dataset)

Dataset of "Motion-Robust Features for Electrodermal Startle Monitoring with a Smart Cane" publication., Dataset used to elaborate "Motion-Robust Features for Electrodermal Startle Monitoring with a Smart Cane" conference paper at IEEE Sensors 2026.

  • Villalba-Bravo, Rafael
  • Trujillo-León, Andrés
  • Vidal-Verdú, Fernando
This dataset supports the study of startle-related physiological responses during walking using a wireless smart assistive cane equipped with a Galvanic Skin Response (GSR) sensor. Data were collected from 22 healthy participants walking through university areas while exposed to sudden auditory stimuli designed to elicit startle responses. GSR, tonic, phasic and acceleration signals were recorded simultaneously using the smart cane and an Empatica EmbracePlus reference device. The dataset includes raw/preprocessed signals, extracted GSR features and statistical results from Linear Mixed-Effects Models (LMMs) assessing the effects of startle condition and motion. The analysis identified 12 of 20 extracted features as motion-robust on the smart cane, with moderate-to-large effect sizes (Cohen’s dz = 0.54–1.27). These results indicate that startle-related physiological information can be detected from a cane-embedded GSR sensor during walking despite motion artifacts, supporting its potential use in future assistive and wearable systems for ambulatory startle and stress monitoring.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Data for the regular article "Enhanced Thermo-Photocatalytic CO₂ Reduction to CH₄ over Cu-Modified TiO₂-Based Catalysts"

  • Patulski, Piotr
  • García-Pérez, Nicolás
  • Berenguer-Murcia, Ángel
  • Cazorla-Amorós, Diego
  • García-Pérez, Nicolás|||/items/798b9e40-2f03-48c8-945d-dec2722def28
  • Berenguer-Murcia, Ángel|||/items/ce71666d-8c9c-47fa-b876-397de66a9989
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Patulski, Piotr|||/items/25507606-8bec-4f07-8362-1a8ce823b0ac
This file contains the data of the manuscript Enhanced Thermo-Photocatalytic CO₂ Reduction to CH₄ over Cu-Modified TiO₂-Based Catalysts submitted for publication in Nanomaterials journal.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Data for the regular article: "Photoreforming with Cu/TiO2 and Ni/TiO2 photocatalysts: production of hydrogen and revalorization of biomass substrates"

  • Bouchabou, Meryem
  • Brocani-Pasino, Stephanie Araceli
  • Belda-Marco, Sergio
  • Román-Martínez, M. Carmen
  • Lillo-Rodenas, Maria Angeles
  • Román-Martínez, M. Carmen|||/items/57646c16-6d85-4ed7-8af9-b8780248a1df
  • Lillo-Rodenas, Maria Angeles|||/items/d56418ee-38bb-491e-a494-7f14757d264f
To produce hydrogen and revalorize lignocellulosic residues, Cu/TiO2 and Ni/TiO2 photocatalysts (metal loading 1 or 5 wt%), as-prepared and after thermal reduction treatment, were tested for the photoreforming of cellulose and almond shell derived-substrates. Net photoreforming contributions were quantified by subtracting the individual contributions of photodegradation and photocatalyzed water splitting. Only milled cellulose (MC) and the liquid from the hydrothermal carbonization of milled almond shell (HMAS-L2) substrates proved effective for photoreforming, yielding significantly higher hydrogen productions than those obtained from substrates photodegradation and water splitting. As-prepared Cu/TiO2 showed efficient photocatalytic activity due to the facile in-situ reduction of Cu species. Conversely, Ni/TiO2 photocatalysts became active only after the reduction treatment, when partial formation of Ni0 species enhanced charge separation. The presence of reduced metals significantly improved photoactivity by decreasing charge recombination. The highest hydrogen productions reached were 2320 μmol·gcat−1· h−1 and 2440 μmol·gcat−1·h−1 with MC_5Ni-P25-r and HMAS-L2_5Cu/P25-r, respectively, surpassing previously reported literature values. The H2/CO2 molar ratios, with values close to the theoretical stoichiometric ratio (≈2), confirmed the predominant photoreforming pathway, while deviations indicated concurrent photodegradation and/or photoinduced water splitting. Tests with scavengers confirmed the effective photoreforming with MC and HMAS-L2 substrates, in contrast to milled almond shell and its derived solids.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Ecotoxicity of Thymol in Dung Beetles (Coleoptera: Geotrupidae) and Its Potential as a Safer Anthelmintic Alternative [Dataset]

  • Cortez, Vieyle
  • Verdú, José R.
  • González Rodríguez, Estela
  • Ortiz, Antonio J.
  • Rosa-García, Rocío
  • Cortez, Vieyle|||/items/b706ed6b-3ac0-4743-8fcf-380a0da522b6
  • Verdú, José R.|||/items/aec43e86-8ee7-42d2-825d-88e30c9e56c5
  • González Rodríguez, Estela|||/items/94ee1a0a-e511-4256-8966-1fd1317bf54e
Dung beetles play a crucial role in rangeland sustainability by facilitating dung removal, nutrient recycling, soil bioturbation, parasite suppression, and greenhouse gas mitigation. However, the widespread prophylactic use of synthetic anthelmintics, particularly macrocyclic lactones such as ivermectin, results in the excretion of biologically active residues in faeces that cause lethal and sublethal effects on non-target coprophagous insects. These ecotoxicological impacts threaten dung beetle diversity and compromise ecosystem functioning in pastoral landscapes. In contrast, plant-derived anthelmintics such as thymol (THY) are emerging as more environmentally compatible alternatives. In this study, we evaluated the sublethal ecotoxicity of dietary THY exposure in the dung beetle Thorectes lusitanicus Jeckel, 1866 (Coleoptera: Geotrupidae), a flightless telephagic tunneller native to Iberian Mediterranean ecosystems. Antennal sensory performance was quantified using electroantennography (EAG), while immunocompetence was assessed through haemolymph total protein content, phenoloxidase (PO) activity and prophenoloxidase (proPO) levels. Ivermectin was included as a reference treatment due to its known disruptive effects on insect olfactory and immune systems. THY ingestion did not impair antennal responsiveness or modify immune parameters relative to controls, even at the highest exposure concentrations tested. In contrast, ivermectin significantly reduced olfactory sensitivity and induced measurable immune alterations. Collectively, these findings support THY as a promising phytochemical anthelmintic with minimal ecotoxic risk to dung beetles. Its incorporation into livestock parasite-control strategies may reduce the environmental footprint of veterinary pharmaceuticals and help maintain the essential ecosystem services provided by dung-associated fauna.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

IAEAV Dataset 1.1: Audio Recordings of Alzheimer Patients and Healthy Controls, Conjunto de datos IAEAV 1.1: Grabaciones de audio de pacientes con Alzheimer y sujetos sanos de control

  • Pérez Sempere, Ángel
  • Teruel, Miguel A.
  • Moreno Navarro, Luis
  • Montero Pardo, Lyan
  • Escalante Belmonte, Bárbara
  • García-Sigüenza, Javier
  • Navarro, Álvaro
  • Sanchis, Javier
  • Vera Arenas, Cristian Javier
  • Carnero Pardo, Cristobal
  • Teruel, Miguel A.|||/items/72e39554-945f-4f46-9aea-dbce9f65e43b
  • García-Sigüenza, Javier|||/items/31703d82-c6d3-4a31-84f3-d15503039edf
  • Sanchis, Javier|||/items/223d926e-7f4e-416b-89b9-2ee8648e6fcc
  • Navarro, Álvaro|||/items/7ee415a4-651b-46a5-aeb9-32f9c9931cf8
  • Vera Arenas, Cristian Javier|||/items/3748c574-4c96-415a-b002-53ae34521370
  • Escalante Belmonte, Bárbara|||/items/0a4f7fd1-2c49-414d-981e-da3e5e5a9d94
The IAEAV dataset contains a collection of audio recordings in Spanish, comprising dialogues between medical practitioners and Alzheimer patients or healthy control participants The dataset is designed for research on speech patterns and communication dynamics, with a particular focus on Alzheimer's disease. It includes 184 recordings from healthy controls and 39 from Alzheimer patients, each annotated with time-stamped labels that differentiate between medical practitioners, patients, and overlapping speech. All audio recordings have been anonymized through morphing and the removal of personally identifiable information to ensure participant privacy. The IAEAV dataset serves as a valuable resource for studies in artificial intelligence, natural language processing for speech processing and text transcriptions, clinical interaction analysis, and Alzheimer's research, offering insights into verbal communication in both clinical and control settings.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Data for the regular article "Activating Agent-Free Synthesis of N,P-Co-Doped Porous Carbons from Lignocellulosic Waste for the Oxygen Reduction Reaction"

  • Pabón-Román, Keila Melissa
  • Chaparro-Garnica, Jessica
  • Morallon, Emilia|||/items/a15cf511-9365-4c40-afcb-ea29d4418244
  • Cazorla-Amorós, Diego
  • Cazorla-Amorós, Diego|||/items/bab354fe-ec79-49e0-a4f3-5288ee396750
  • Chaparro-Garnica, Jessica|||/items/ef0cb7bf-ab19-4397-9276-686b1829395e
  • Pabón-Román, Keila Melissa|||/items/72dcae70-f639-4cf0-8a8f-ba0e2310eefb
This file contains the data of the manuscript Activating Agent-Free Synthesis of N,P-Co-Doped Porous Carbons from Lignocellulosic Waste for the Oxygen Reduction Reaction submitted for publication in Sustainability journal.
RUA. Repositorio Institucional de la Universidad de Alicante
Datos de investigación Set de datos (Dataset)

Differential Compatibility Of Essential Oil Nanoemulsions With Aphid Predators: High Selectivity Towards Diptera Syrphid [Dataset]

  • Zavatta, Laura
  • Casas, Jose L.
  • Guerrero Martínez, Juan Ramón
  • López Santos-Olmo, María
  • Burgio, Giovanni
  • Marcos-García, M. Ángeles
  • Casas, Jose L.|||/items/2f40576f-7e29-4d0f-a590-9f98abfe7309
  • Guerrero Martínez, Juan Ramón|||/items/32a5fcb4-eff4-420a-8824-bfb4f1367b8a
  • Marcos-García, M. Ángeles|||/items/faf4d1df-984c-4fca-bb42-a96d2885ab03
  • López Santos-Olmo, María|||/items/50e2105f-0c50-461e-abba-cb54253701f6
Helvia. Repositorio Institucional de la Universidad de Córdoba
Datos de investigación Set de datos (Dataset)

MgAlFe-layered double hydroxides/carbon nitride photocatalysts for nitrogen oxides abatement: enhancing visible light driven performance while minimizing reliance on critical raw materials [Dataset]

  • Ruz Luna, Antonio Manuel
  • Marín Toral, Laura
  • Martín, F.
  • Pavlovic Milicevic, Ivana
  • Sánchez Granados, Luis
Datos de investigación asociados al artículo: http://hdl.handle.net/10396/36509
Helvia. Repositorio Institucional de la Universidad de Córdoba
Datos de investigación Set de datos (Dataset)

Entropy-engineered 2D layered double hydroxides as efficient single-component visible-light photocatalysts for selective NOx removal [Dataset]

  • Ruz Luna, Antonio Manuel
  • Gámiz Ruiz, Beatriz María
  • Marín Toral, Laura
  • Pavlovic Milicevic, Ivana
  • Sánchez Granados, Luis
Datos de investigación asociados al artículo: http://hdl.handle.net/10396/36725
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

SAMson: an automated brain extraction tool for rodents using SAM

  • Panadero Soler, Daniel
  • Kotb Selim, Mohamed
  • Martínez-Tazo, Patricia
  • Muñoz-Moreno, Emma
  • Ramos-Cabrer, Pedro
  • López-Larrubia, Pilar
  • De Santis, Silvia
  • Canals, Santiago
  • Pertusa, Antonio
[Description of methods used for collection/generation of data] D1: Images acquired on a 7-T scanner (Bruker, BioSpec 70/30, Ettlingen, Germany) using a T2-weighted RARE (Rapid Acquisition with Relaxation Enhancement) sequence. D2: Images acquired on a 7-T scanner (Bruker, BioSpec 70/30, Ettlingen, Germany) equipped with an actively shielded gradient system using a T2-weighted sequence. D3: Images acquired on a 11.4-T MRI scanner (Bruker BioSpec USR 117/16, Ettlingen, Germany) using a T2-weighted RARE sequence., [Methods for processing the data] Panadero Soler, Daniel; Kotb Selim, Mohamed; Martínez-Tazo, Patricia; Muñoz-Moreno, Emma; Ramos-Cabrer, Pedro; López-Larrubia, Pilar; De Santis, Silvia; Canals, Santiago; Pertusa, Antonio; 2025; SAMson: an automated brain extraction tool for rodents using SAM [Dataset]; BioRxiv; https://doi.org/10.1101/2024.03.07.583982, S.C. acknowledges support from PCI2024-153491 funded by MICIU /AEI /10.130 39/501100011033 and UE, PID2021-128158NB-C21 funded by MICIU/10.13039/ 50110 0011033 and FEDER, UE, CEX2021-001165-S funded by MICIU/AEI /10.13039/50110 0011033 and Excellence Grant CIPROM/2022/15 and INVESTIGO INVEST/2022/396 funded by the Generalitat Valenciana and Next Generation EU. S.D.S. was supported by the the Spanish Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación (PID2021-128909NA-I00 and CNS2023-14488 ), by the Programs for Centres of Excellence in R\&D Severo Ochoa (CEX2021-001165-S), and by the Generalitat Valenciana through a Subvencion para la contratación de investigadoras e investigadores doctores de excelencia 2021 (CIDEGENT/2021/015) and by a Fundación Pasqual Maragall Research Programme (2024 call). P.L-L. was funded by grant PID2021-122528OB-I00 funded by MICIU/AEI/10.13039/501100011033/FEDER, UE. Some of the mice used in this study were generated in the project funded by MCIU/AEI/FEDER, UE grants PID2022-141700OB-I00, MCIN/AEI/10.13039/501100011033 and CB/07/09/0034 Center for Networked Biomedical Research on Mental Health (CIBERSAM, Bortolozzi A). In addition, the funding sources acknowledged in: 1) Mateu-Bosch A, Segur-Bailach E, Muñoz-Moreno E, Barallobre MJ, Arbonés ML, Gea-Sorlí S, et al. Systemic delivery of AAV-GCDH ameliorates HLDinduced phenotype in a glutaric aciduria type I mouse model. Molecular Therapy - Methods & Clinical Development. 2024;32(3):101276. Available from: https://www.sciencedirect.com/science/article/pii/S2329050124000925. and 2) Haddad-Tóvolli R, Ramírez S, Muñoz-Moreno E, Milà-Guasch M, Miquel-Rio L, Pozo M, et al. Food craving-like episodes during pregnancy are mediated by accumbal dopaminergic circuits. Nature Metabolism. 2022 Apr;4(4):424-34. Available from: https://doi.org/10.1038/s42255-022-00557-1., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001165-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Persistent Luminescence Analysis in the Frequency domain

  • Romero Aguilar, Manuel
  • Castaing, Victor
  • Rytz, Daniel
  • Lozano, Gabriel
  • Míguez, Hernán
File List: - Fig2_ab.txt : Temperature dependent frequency spectra of SC1 measured for 1.92mW/mm2 excitation density: Frequency in Hz (column 1), Hr (column 2) and Hi (column 3) at 25C; Hr (column 4) and Hi (column 5) at 30C; Hr (column 6) and Hi (column 7) at 35C; Hr (column 8) and Hi (column 9) at 40C. - Fig2_cd.txt : Excitation density dependent frequency spectra of SC1 measured at 25C: Frequency in Hz (column 1), Hr (column 2) and Hi (column 3) for 1.92mW/mm2; Hr (column 4) and Hi (column 5) for 203uW/mm2; Hr (column 6) and Hi (column 7) for 203uW/mm2. - Fig3.txt : Low excitation density frequency spectra for the Powder, SC2 and SC3 at 25C: Frequency in Hz (column 1), Hr (column 2) and Hi (column 3) for the Powder; Hr (column 4) and Hi (column 5) for SC2; Hr (column 6) and Hi (column 7) for SC3., Frequency-domain techniques offer a powerful means to disentangle overlapping physical processes with distinct characteristic timescales—yet remain underexplored in the context of complex photoluminescent materials. Here, we apply frequency-domain analysis to persistent luminescence (PersL) materials, which exhibit long-lasting emission following excitation due to charge trapping and detrapping processes spanning wide temporal ranges. Using SrAl₂O₄:Eu²⁺,Dy³⁺ (SAO:Eu,Dy) as a model system, we develop a general framework for frequency-domain characterization of PersL and report, for the first time, a direct measurement of the trapping rate in such a material. Our approach also enables quantitative assessment of trapping probability, efficiency, and overall PersL performance. This work opens a new pathway for rational optimization of afterglow materials based on mechanistic insights beyond conventional time-domain approaches., This project has received funding from the BBVA Foundation Leonardo Grant for Physics Researchers 2023, and from MCIN/AEI/10.13039/501100011033 by European Union NextGeneration EU/PRTR under grant EUR2023-143467 and PID2024-161708OB-I00. M.R. acknowledges the grant FPU23/01435 funded by MCIN/AEI/10.13039/501100011033. VC acknowledges Junta de Andalucía for financial support through a postdoctoral contract (POSTDOC_21_00694)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary Material Unlocking the hybrid piezo and pyroelectric nanogenerators performance by SiO2 nanowires confinement in poly(vinylidene fluoride)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting Information for Mode of Continental Thinning and Breakup Along the North Iberian-Armorican Conjugate Margins in the Bay of Biscay [Dataset]

  • Madarieta-Txurruka, Asier
  • Pedrera Parias, Antonio
  • Galindo-Zaldívar, Jesús
  • Estrada, Ferran
  • García-Senz, Jesús
  • Ercilla, Gemma
As Supporting Information, we attach seven figures: Figure S1 compiles the available boreholes in the study region. Figure S2 shows the DR 85-05V seismic profile in the Duero Basin. Figure S3 shows the TGS NOPEC CS01-132 seismic profile in the Asturias Basin. Figure S4 shows the ESCIN-4 seismic profile in the Abyssal Plain. Figure S5 shows the MARCONI-1 seismic profile in the Abyssal Plain. Figure S6 shows the NORGASIS-21 seismic profile in the Armorican Slope. Figure S7 shows the Vd-05-42 seismic profile in the Armorican Platform, The following research groups and projects supported this work: IT-1678/22 research group of the Basque Government; Tectonic Processes and Georesources Lab; RNM-148 research group of Junta de Andalucía; REViSE-Betics-PID2020-119651RB-I00 and H2RISE-PID2024-161600OB-I00 financed by AEI and FEDER, UE; BARACA-PID2022-136678NB-I00 financed by MICIU/AEI 10.13039/501100011033 and FEDER, UE. A.M.T. is supported by the postdoctoral contract funded by the “Departamento de Educación del Gobierno Vasco” (Spain) (POS_2023_1_0001), This work contributes to the Institut de Ciències del Mar "Severo Ochoa Centre of Excellence" accreditation CEX2024-001494-S funded by AEI 10.13039/501100011033 of the Spanish Ministry of Science and Innovation, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Refractive index and strain modulation tailor the afterglow of nanocomposite films [Dataset]

  • Castaing, Victor
  • Romero Aguilar, Manuel
  • Drion, Théophile
  • Fernández-Carrión, Alberto J.
  • Lozano, Gabriel
  • Míguez, Hernán
Tailoring the unique delayed and long-lasting luminescence of persistent phosphors is crucial for their application in anti-counterfeiting, data storage, imaging displays, and AC-driven lighting. We introduce a novel strategy to achieve this by modifying the refractive index of persistent phosphor transparent coatings. Specifically, we developed ZnGa2O4:Cr3+/SiO2 nanocomposite films with tunable refractive indices from 1.45 to 1.7. This tunability allowed us to precisely control the Cr3+ radiative decay rate, resulting in a substantial 1.7-fold increase in both luminescence and afterglow brightness. Furthermore, our approach uniquely influences the intrinsic charging rate of the phosphor, a mechanism attributed to the strain induced on the ZnGa2O4:Cr3+ nanocrystals by the presence of SiO2. This work demonstrates an unprecedent ability to manipulate the afterglow kinetics without altering the material composition, opening new avenues for designing and optimizing persistent luminescence materials., This project has received funding from the BBVA Foundation Leonardo Grant for Physics Researchers 2023, and by the Spanish Ministry of Science, Innovation and Universities under Grant EUR2023-143467 funded by MICIU/AEI/ 10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, and Grant PID2024-161708OB-I00 funded by MICIU/AEI/ 10.13039/501100011033. V.C. acknowledges Junta de Andalucía for financial support (POSTDOC_21_00694). MR acknowledges the grant FPU23/01435 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed, File List: - Fig1b_ParticleDiameter.txt : Number of particles (column 1), ZnGa2O4:Cr3+ particle diameter (column 2) and SiO2 particle diameter (column 3). - Fig1i_XRD.txt : 2 theta (º, column 1), normalized XRD reflection intensity of 100:0 1000 °C (column 2), 100:0 800 °C (column 3), 50:50 1000 °C (column 4), 50:50 800 °C (column 5). - Fig1j_Strain.txt : SiO2 content (%, column 1), Strain 404 of 1000 °C samples (column 2), Strain 404 of 800 °C samples (column 3), cubic lattice parameter relative variation of 1000 °C samples (column 4), cubic lattice parameter relative variation of 800 °C samples (column 5). - Fig2a_RefractiveIndex_GradMZGO.txt : SiO2 content (%, column 1), effective refractive index of 1000 °C sample (column 2), effective refractive index of 800 °C sample (column 3), calculated product of the radiative decay rate and the quantity of ZGO for samples calcined at 1000 °C (column 4), measured product of the radiative decay rate and the quantity of ZGO for samples calcined at 1000 °C (column 5) and calculated product of the radiative decay rate and the quantity of ZGO for samples calcined at 800 °C (column 6). - Fig2c_Lum.txt : Wavelength (nm, column 1), normalized Lum intensity of reference 100:0 1000 °C sample (column 2), normalized Lum intensity of 90:10 1000 °C sample (column 3), normalized Lum intensity of 100:0 800 °C sample (column 4), normalized Lum intensity of 90:10 800 °C sample (column 5). - Fig2d_LumEnhancement.txt : SiO2 content (%, column 1), Lum enhancement of 1000 °C samples (column 2), standard deviation of Lum enhancement of 1000 °C samples (column 3) and Lum enhancement of 800 °C samples (column 4). - Fig3a_PersL.txt : Wavelength (nm, column 1), normalized PersL intensity of reference 100:0 1000 °C sample (column 2), normalized PersL intensity of 90:10 1000 °C sample (column 3), normalized PersL intensity of 100:0 800 °C sample (column 4), normalized PersL intensity of 90:10 800 °C sample (column 5). - Fig3b_PersLEnhancement.txt : SiO2 content (%, column 1), PersL enhancement of 1000 °C samples (column 2), standard deviation of PersL enhancement of 1000 °C samples (column 3), PersL enhancement of 800 °C samples (column 4), standard deviation of PersL enhancement of 800 °C samples (column 5). - Fig4b_Kinetics_800°C.txt : Time (s, column 1), measured normalized PersL intensity of 100:0 800 °C sample (column 2), fitted normalized PersL intensity of 100:0 800 °C sample (column 3), measured normalized PersL intensity of 90:10 800 °C sample (column 4), fitted normalized PersL intensity of 90:10 800 °C sample (column 5), measured normalized PersL intensity of 80:20 800 °C sample (column 6), fitted normalized PersL intensity of 80:20 800 °C sample (column 7), measured normalized PersL intensity of 70:30 800 °C sample (column 8) and fitted normalized PersL intensity of 70:30 800 °C sample (column 9). - Fig4c_Kinetics_1000°C.txt : Time (s, column 1), measured normalized PersL intensity of 100:0 1000 °C sample (column 2), fitted normalized PersL intensity of 100:0 1000 °C sample (column 3), measured normalized PersL intensity of 90:10 1000 °C sample (column 4), fitted normalized PersL intensity of 90:10 1000 °C sample (column 5), measured normalized PersL intensity of 80:20 1000 °C sample (column 6), fitted normalized PersL intensity of 80:20 1000 °C sample (column 7), measured normalized PersL intensity of 70:30 1000 °C sample (column 8) and fitted normalized PersL intensity of 70:30 1000 °C sample (column 9). - Fig4d_BrightnessFactor_TrappingStrength_800°C.txt : SiO2 content (%, column 1), trapping strength parameter omega of 800 °C samples (column 2), brightness factor MZGO*Grad/Gtot of 800 °C samples (column 3) and standard deviation of brightness factor MZGO*Grad/Gtot of 800 °C samples (column 4). - Fig4e_BrightnessFactor_TrappingStrength_1000°C.txt : SiO2 content (%, column 1), trapping strength parameter omega of 1000 °C samples (column 2), standard deviation of trapping strength parameter omega of 1000 °C samples (column 3), brightness factor MZGO*Grad/Gtot of 1000 °C samples (column 4) and standard deviation of brightness factor MZGO*Grad/Gtot of 1000 °C samples (column 5). - Fig_S3a.txt : Ellipsometry spectra and fitting of ZGO:Cr film annealed at 1000 °C. Measurements were performed for the following incident angles: 50º,55º,60º,65º,70º. Wavelength in nm (column 1), delta in º (columns 2-6), psi in º (columns 7-11), fitted delta in º (columns 12-16), fitted psi in º (columns 17-21). - Fig_S3b.txt : Ellipsometry spectra and fittings of 90:10 composite film annealed at 1000 °C. Measurements were performed for the following incident angles: 50º,55º,60º,65º,70º. Wavelength in nm (column 1), delta in º (columns 2-6), psi in º (columns 7-11), fitted delta in º (columns 12-16), fitted psi in º (columns 17-21). - Fig_S3c.txt : Ellipsometry spectra and fittings of 80:20 composite film annealed at 1000 °C. Measurements were performed for the following incident angles: 50º,55º,60º,65º,70º. Wavelength in nm (column 1), delta in º (columns 2-6), psi in º (columns 7-11), fitted delta in º (columns 12-16), fitted psi in º (columns 17-21). - Fig_S3d.txt : Ellipsometry spectra and fittings of 70:30 composite film annealed at 1000 °C. Measurements were performed for the following incident angles: 50º,55º,60º,65º,70º. Wavelength in nm (column 1), delta in º (columns 2-6), psi in º (columns 7-11), fitted delta in º (columns 12-16), fitted psi in º (columns 17-21). - Fig_S3e.txt : Ellipsometry spectra and fittings of 60:40 composite film annealed at 1000 °C. Measurements were performed for the following incident angles: 50º,55º,60º,65º,70º. Wavelength in nm (column 1), delta in º (columns 2-6), psi in º (columns 7-11), fitted delta in º (columns 12-16), fitted psi in º (columns 17-21). - Fig_S3f.txt : Ellipsometry spectra and fittings of 50:50 composite film annealed at 1000 °C. Measurements were performed for the following incident angles: 50º,55º,60º,65º,70º. Wavelength in nm (column 1), delta in º (columns 2-6), psi in º (columns 7-11), fitted delta in º (columns 12-16), fitted psi in º (columns 17-21). - Fig_4a.txt : Transmission and reflection spectra and fittings of ZGO:Cr film annealed at 800 °C. Measurements were performed for the following incident angles: 6º,30º,50º. Wavelength in nm (column 1), reglectance R (columns 2-4), transmittance (columns 5-7), fitted reflectance (columns 8-10), fitted transmittance (columns 11-13). - Fig_4b.txt : Transmission and reflection spectra and fittings of 80:20 composite film annealed at 800 °C. Measurements were performed for the following incident angles: 6º,30º,50º. Wavelength in nm (column 1), reglectance R (columns 2-4), transmittance (columns 5-7), fitted reflectance (columns 8-10), fitted transmittance (columns 11-13). - Fig_4c.txt : Transmission and reflection spectra and fittings of 50:50 composite film annealed at 800 °C. Measurements were performed for the following incident angles: 6º,30º,50º. Wavelength in nm (column 1), reglectance R (columns 2-4), transmittance (columns 5-7), fitted reflectance (columns 8-10), fitted transmittance (columns 11-13).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Additional file 1 of Tfcp2l1 as a central integrator of hypoxia, dedifferentiation, and tumor progression

  • Clemente-González, Cynthia
  • Carnero, Amancio
Ministerio de Ciencia, Innovación y Universidades AEI-MICIU/FEDER CIBERONC Regional Ministry of Economic Transformation, Industry, Knowledge and Universities. Junta de Andalucía, AECC, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Large sub-Kelvin Magnetocaloric Effect and Phase Behavior of Gadolinium Nitrate Hexahydrate [Dataset]

  • Gracia, David
  • Ubach I Cervera, Marc
  • Charkiolakis, Emmanouil K.
  • García, Inés
  • Milios, Constantinos J.
  • Evangelisti, Marco
Continuous-wave electron paramagnetic resonance (EPR) measurements on a 1% diluted polycrystalline sample of [Gd@Y(NO3)3]6H2O were recorded using a Bruker Elexys 580 spectrometer operating in X-band (9.715 GHz). The spectrometer was equipped with an Oxford CF900 continuous-flow cryostat, which employs liquid-helium to cool down the sample environment. The microwave power was adjusted to avoid saturation effects. The magnetic field was measured with a Bruker ER035 gaussmeter. Direct-current (DC) magnetic measurements were performed on a polycrystalline powder sample (ca. 5 mg), loaded into a plastic capsule and immobilized with eicosane wax to prevent grain movement. Isothermal magnetization curves were collected in magnetic fields between 0-7 T over the temperature range 2-10 K. DC magnetic susceptibility data were recorded over the same temperature range under a constant applied magnetic field of B=0.1 T. All data obtained were corrected for diamagnetic contributions coming from both the sample holder and eicosane wax. In addition, the complex alternating-current (AC) magnetic susceptibility was measured under zero applied magnetic field over the temperature range 0.05-4 K, using a frequency of 525 Hz and an AC field amplitude of 2·10^{-4} T. A thin pressed polycrystalline pellet (ca. 6 mg) was prepared for these experiments, and susceptibility data were initially recorded in arbitrary units. Absolute values of the real component were obtained by comparison with DC susceptibility data collected with the MPMS-3 in the overlapping temperature range (2-4 K), where dissipative processes are negligible. The imaginary component is reported in arbitrary units. Heat capacity measurements were carried out using the relaxation method in a Quantum Design PPMS equipped with a 3He cryostat, covering temperatures down to 0.4 K under constant magnetic fields from 0 to 7 T. Additional measurements extended to 0.05 K under fields up to 1 T using a Quantum Design PPMS DynaCool with DR module. Samples consisted of thin pressed polycrystalline pellets (ca. 1 mg for 3He and ca. 0.2 mg for DR). In both setups, Apiezon N grease (0.2 mg) was applied to ensure good thermal contact between the sample and the calorimeter platform. Its contribution to the total heat capacity was subtracted using a phenomenological correction. Direct quasi-adiabatic MCE measurements were performed for complete demagnetization processes. For these experiments, a pressed polycrystalline pellet of ca. 5 mg was mounted on a calorimeter platform coated with ca. 0.2 mg of Apiezon N grease to improve thermal coupling. In addition, the MCE was also evaluated indirectly by applying standard thermodynamic relations to the measured magnetization and heat capacity data., We report a comprehensive magnetothermal study of the classical gadolinium salt [Gd(NO3)3]·6H2O at temperatures approaching absolute zero. Despite its long-standing availability as a commercial compound, its magnetocaloric properties have remained unexplored. Using electron paramagnetic resonance, magnetic susceptibility, heat capacity, and direct measurements of the magnetocaloric effect, we reveal that weak dipolar interactions combined with axial crystal-field anisotropy drive antiferromagnetic ordering at T_N = 0.21 K. Remarkably, [Gd(NO3)3]·6H2O exhibits an isothermal magnetic entropy change of -\Delta S_m = 26.1 J / K kg at T = 0.6 K for a modest field variation of Delta-B = 1 T, and an adiabatic temperature change of Delta-T_ad = 5.0 K at T = 1.6 K for the same Delta-B, outperforming many state-of-the-art Gd-based refrigerants. These results provide a reference for understanding magnetocaloric behavior in hydrated salts and highlight the interplay between crystal-field anisotropy and dipolar coupling at ultra-low temperatures., This work was funded by EU (MSCA-DN MolCal, 101119865), MICIU/AEI/10.13039/501100011033/ and ERDF/EU (PID2021-124734OB-C21, PID2024-159457OB-C21, CEX2023-001286-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data from: Short-term microbial dynamics and changes in greenhouse gas emissions in cattle dung treated with ivermectin

  • Lobo, Jorge M.
  • Triadó-Margarit, Xavier
  • Casamayor, Emilio O.
  • Cortez, Vieyle
  • Sánchez-Piñero, Francisco
  • Verdú, José R.
[Description of methods used for collection/generation of data] The experiments were conducted at two sites within Doñana National Park (Andalusia, southern Spain) located 10 km apart: the Doñana Biological Reserve, which is traditionally grazed by organic livestock that does not receive veterinary medical products, and Los Sotos, characterised by the long-term presence of livestock treated with ivermectin (“site” factor). At both sites, short-term temporal variation in CO2 and CH4 emissions from dung pats was measured under two conditions: allowing or preventing dung beetle colonisation (“beetle” factor), and using dung pats either with or without ivermectin (“dung treatment” factor). Eight artificial dung pats were placed on the ground to assess CO2 and CH4 emissions at four different time points (“time” factor): immediately after placement (T0), 6 hours (T1), 24 hours (T2), and 48 hours after placement (T3). In total, 256 artificial dung pats were placed (8 dung pats x 4 time levels x 2 beetle levels x 2 dung treatment level x 2 site levels. After estimating CO2 and CH4 emissions using a portable gas analyser, all dung beetles from pats where colonisation was allowed were manually collected and transferred to pots for taxonomic identification, allowing the calculation of species richness, abundance, and biomass (fresh weight). CO2 concentrations were corrected to avoid overestimation by subtracting the contributions of soil respiration (microbiota, edaphic mesofauna, etc.), vegetation respiration, and dung beetle respiration. To estimate microbiota, ten artificial dung pats were arranged in two rows spaced 5 meters apart. One row contained dung pats with ivermectin, and the other without (“dung treatment” factor). Dung samples of 2 cm3 were extracted from non-contiguous portions of the centre of the pats at the same four time points (“time” factor). Of the potential 80 samples (10 dung pats x 2 dung treatment levels x 4 time levels), 14 were damaged. Molecular and bioinformatic analyses were performed to characterize archaea and bacteria present in the dung samples. DNA was extracted and purified, followed by multiplex PCR amplification and Illumina MiSeq sequencing. The V4 variable region of the 16S rRNA gene was amplified, and raw sequences were processed using the UPARSE pipeline. After merging paired reads, approximately 70.5% of the original reads were retained (2,477,067 reads out of 3,512,012). These retained reads were dereplicated (collapsing sequences at 100% identity) and clustered into zero-radius operational taxonomic units (zOTUs), excluding singletons. Over 85.05% of the merged sequence pool (2,912,356 reads) was mapped back to the zOTUs, resulting in 3,427 prokaryotic zOTUs. Taxonomic assignments were carried out using the SILVA_138 database via the SINA reference-based multiple sequence alignment tool. The final curated dataset comprised 3,403 prokaryotic zOTUs. The complete gene sequence dataset has been deposited in the NCBI Sequence Read Archive under BioProject ID PRJNA515520 and is available upon request. Environmental ontology descriptive terms (EnvO terms) were extracted from the closest sequences matches (99% identity) in the GenBank global databases using the SEQenv pipeline., This dataset contains the quantified measurements of greenhouse gas emissions (CO2 and CH4) from dung pats collected to evaluate the effects of ivermectin on dung beetles and prokaryotic assemblages in Mediterranean pastures, based on field experiments conducted under controlled conditions. The treatments either allowed or excluded dung beetle colonisation of dung pats treated with ivermectin or left untreated, while also examining temporal changes in the richness and taxonomic composition of dung-associated prokaryotic assemblages during the first 48 hours after dung deposition. The data show that greenhouse gas emissions at least double in the absence of dung beetles, reinforcing the causal link between ivermectin use and increased CO2 and CH4 emissions. The dataset also shows that the bacterial phyla Firmicutes, Bacteroidota, and Proteobacteria dominated the dung microbiota, with ivermectin potentially favouring certain anaerobic and facultative taxa., Financial support was provided by the projects PID2019-105418RB-I00 (MCIN/AEI), PID2024-155372OB-I00 (MICIU/AEI), and OAPN 3036/2023. EOC and XTM were funded by project INTERACTOMA (RTI2018-101205-B-I00) from MICIN/AEI/ERDF to EOC., File List: This dataset consists of three tables and two figures. Table S1, comprising 512 rows and 11 columns, includes the number of species (Species Richness), number of individuals (Abundance), and Biomass (measured in grams of fresh weight) of dung beetles collected in the artificial dung pats, according to the four experimental factors considered (Site, Time, Beetle and Dung treatment). When dung beetle colonization was prevented, richness, abundance, and biomass values are zero. The “Emission” column reports methane (CH4) or carbon dioxide (CO2) emitted by dung pats (in g m-2 day-1). “Corrected Emissions-Beetles” values exclude emissions attributable to dung beetles, whereas “Corrected Emissions-(Beetles+Soil+Vegetation)” values exclude emissions from dung beetles, soil and vegetation, thereby isolating those directly attributable to the dung pats. Table S2, composed of 3,403 rows and 73 columns, shows the zOTUs' taxonomy and their sequence read counts for each sample. Samples are designated with three letters indicating the absence (ECO) or presence (IVM) of ivermectin in the dung pats, the time point of collection (T0, T1, T2, and T3), and an identification number. Table S3 contains 33 rows and 9 columns and presents the results of a two-way factorial ANOVA evaluating the effects of dung treatment (DT; dung pats with and without ivermectin) and time (T; from T0 to T3), as well as of the DT × T interaction, on the relative abundance of prokaryotic families representing more than 0.5% of the total sequences. Only relationships with probability values lower than the threshold set by a strict Bonferroni correction (0.05/33 = 0.002) are shown. The first number is the F3,58 value while the second number is the associated p-value. The table also reports the relative abundance (RA) of each family. An arrow in the last column indicates whether the relative abundance of zOTUs increases or decreases at the specified time point(s). In cases of statistically significant interactions, arrows refer to changes observed in dung pats containing ivermectin (IVM). Figure S1 presents box plots comparing the relative abundance (%) of prokaryotic families representing more than 0.5% of the total abundance (n = 33) across the four time levels: T0 (at dung pat deposition), T1 (6 hours after deposition), T2 (24 hours after deposition), and T3 (48 hours after deposition). Families are classified according to their main metabolic characteristics (i.e., anaerobic, aerobic/facultatively anaerobic, and aerobic) and are compared independently. Results of pairwise hypothesis contrast tests are presented in the figure. *P < 0.05, **P < 0.01, ***P < 0.001, ****P < 0.0001. Bacteroi: Bacteroidota; Bdellovi.: Bdellovibrionota; Cyano: Cyanobacteria; Fi.;B: Firmicutes;Bacilli; Fi.;C: Firmicutes;Clostridia; Fi.: Firmicutes; Alpha-P: Alphaproteobacteria; Gamma-P: Gammaproteobacteria; Verru.: Verrucomicrobiota. Figure S2 shows box plots comparing the relative abundance (%) of families corresponding to methanogenic Archaea in dung pats with and without ivermectin across the four time points., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Datasets Glycolysis and hexosamine biosynthesis pathways in valve cells

  • Sánchez-Bayuela, Tania
  • Peral-Rodrigo Miriam
  • López, Javier
  • Gómez, Cristina
  • Pérez-Riesgo, Enrique
  • López-Andrés, Natalia
  • Fernández García, Nieves
  • San Román, José Alberto
  • Sánchez Crespo, Mariano
  • García-Rodríguez, Carmen
(1) Real-time metabolic analysis of human valve cells- It was performed in an Agilent Seahorse XFe24 metabolic analyzer (Agilent Technologies, Santa Clara, CA) using Cell Mito Stress and ATP assay kits. In total, 40,000 cells of endothelial valve cells or 30,000 cells of interstitial valve cells were seeded in a Seahorse XF24 Cell Culture Microplate and allowed to attach overnight. Then, cells were activated as indicated for 24 h. Before assay, media were replaced by Seahorse XF RPMI Medium, pH 7.4, supplemented with 2 mmol/L L-glutamine, 25 mmol/L D-glucose, and 1 mmol/L pyruvate. Cells were incubated for at least 45 minutes at 37°C in a non-CO2 incubator before the analysis. Data were analyzed with Seahorse Analytics software and normalized to the number of cells, evaluated by Hoechst staining in a Cytation 5 multimode reader (BioTek, Winooski, VT) at the end of the experiment. Data describe the indicated biological replicates performed in triplicate., (2) Reversed transcriptase quantitative PCR (RT-PCR) for the gene expression analysis of several genes involved in metabolism and inflammation. Total RNA was extracted with Tri-Reagent and analyzed by RT–PCR. in a LightCycler480 (Roche Diagnostics) using KAPA SYBR FAST master mix kit (Merck Millipore). Transcript levels were expressed as relative to the housekeeping gene value, GAPDH (2−ΔCt, Ct=cycle threshold value). Data describe the number of biological replicates performed in duplicate., (3) Western blot assays for the immunodetection of proteins. Whole cell lysates were analyzed by separated by SDS-PAGE, 10% gels. Blots were incubated with primary antibodies recognizing the human form of intercellular adhesion molecule (ICAM)-1, vascular cell adhesion molecule (VCAM)-1. Data was normalized using antibodies recognizing the housekeeper gene β-tubulin. Densitometer FX and Quantity one software was used to acquire densitometry data for each blot. Images were exported to TIFF and the analysis of the band of interest was performed using Fiji software. Densitometry data were presented as arbitrary units normalized to β-tubulin. Data refer to the indicated biological replicates., (4) Quantitation of proinflammatory proteins secretion by ELISA It was detected in the supernatants of cells activated for 24 h by immunoassay kits following the manufacturer´s procedures: IL-6 (Diaclone, Besançon, France, # 950.030.048) and PGE2 (Arbor assay Inc, Arbor Assay, MI). The absorbance at 450 nm was measured using a microplate reader (Versamax, Molecular Devices), and data were normalized to total protein content measured by the bicinchoninic acid/BCA method., (5) Monocyte-valve endothelial cell (VEC) adhesion assays.VECs monolayers cultured in a 6-well plate were pre-incubated with metabolic modulators and then activated in activation media for 24 h under static conditions. In parallel, a monocytic cell line, THP-1 (ATCC®; Middlesex, UK Ref. TIB-202TM), was cultured in RPMI-1640 medium supplemented with 1% L-glutamine and 10% inactivated fetal bovine serum. For the adhesion assay, 1 x 106 cells/well of THP-1 in HBSS containing Ca2+ and Mg2+, were added to VECs monolayers and incubated for 7 min at 37oC. After two washes with HBSS, microphotographs of 16 sections were taken using a phase-contrast microscope (Nikon Eclipse TS100) connected to a digital camera. The number of adhered THP-1 cells was quantified using Image J software. Data were expressed as total number of THP-1cells adhered to the area of each section (mm2)., (6) Immunohistological Evaluation. Tissue staining was performed on transversal sections of human aortic valve leaflets and analyzed as described (Matilla L et al Sex-Related Signaling of Aldosterone/Mineralocorticoid Receptor Pathway in Calcific Aortic Stenosis. Hypertension 79: 1724-1737, 2022). All grossly calcified valves were decalcified in 10% formic acid solution (Sigma) for 24 h. Samples were dehydrated, embedded in paraffin, and cut in 5-μm-thick sections. Immunohistochemistry was performed following the protocol of Leica BOND-Polymer Re-fine Detection automatic immunostainer (Leica). All solutions were filled into the bottle-Bond Open Container (Leica) and registered on computer using the Leica Biosystem program. The immunostaining program protocol includes Fixative solution, Bond wash solution, Blocking with common immunohistochemistry blocker, and incubation with the primary antibody for ICAM-1 or VCAM-1 (Santa Cruz Biotechnology). Secondary antibodies poly-HRP-anti-mouse or poly-HRP-anti-rabbit IgG were used as appropriate. Positive immunoreactive signal was developed using an enhanced 3,3’-diaminobenzidine (DAB) system (Leica). Slides were counterstained with hematoxylin and mounted using DPX mounting media (Merck/Sigma-Aldrich). Imaging was performed using a Leica microscope at 50X and 400X magnification., [EN] These datasets include outputs from studies used to examine the role of inflammation and metabolic rewiring in protein maturation and the adhesion of monocytes to human valve cells, data relevant to early stages of calcific aortic valve disease. Data from cellular models and ex vivo valve tissue is derived from Real-time metabolic assays, Reversed transcriptase quantitative PCR, Western blot assays designed for the immunodetection of proteins, namely adhesion molecules and metabolic proteins, ELISA quantitation of proinflammatory proteins secretion, and monocyte-valve endothelial cell adhesion assays., [ES] Estos conjuntos de datos corresponden a resultados de estudios utilizados para examinar el papel de la inflamación y la remodelación metabólica en la maduración proteica y en la adhesión de monocitos a las células valvulares humanas, datos relevantes para las etapas iniciales de la valvulopatía aórtica calcificada. Los datos de modelos celulares y tejido valvular se derivan de ensayos metabólicos en tiempo real y PCR cuantitativa-transcriptasa inversa, ensayos de Western blot diseñados para la inmunodetección de proteínas, a saber, moléculas de adhesión y proteínas metabólicas, cuantificación ELISA de la secreción de proteínas proinflamatorias y ensayos de adhesión de monocitos a células endoteliales de válvulas., Ministerio de Ciencia e Innovacion (MICIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 [PID2020-113751RB-I00, PID2024-160809OB-I00]; Junta de Castilla y León [VA175P20, Gerencia Regional de Salud GRS2205/A/2020, and Programa Estratégico Instituto de Biomedicina y Genética Molecular-Escalera de Excelencia Ref. CLU-2019-0]; Fundación Eugenio Rodríguez Pascual FERP-2024-60. Instituto de Salud Carlos III [CIBER de Enfermedades Cardiovasculares (CIBERCV) CB16/11/00260, CB16/00483]. Ministerio de Ciencia, innovación y Universidades and Fondo Europeo de Desarrollo Regional (FEDER) [EQC2019-006686-P]; Junta de Castilla y Léon, Valladolid University, and FEDER [IR2020-1-UVA05]. European Union's Recovery and Resilience Facility-Next Generation, in the framework of the General Invitation of the Spanish Government’s public business entity Red.es to participate in talent attraction and retention programs within Investment 4 of Component 19 of the Recovery, Transformation and Resilience Plan. We acknowledge support from CSIC Network on Metabolic Diseases (COMETA) funded by the Consejo Superior de Investigaciones Científicas (CSIC), Spain. PhD fellowships from Valladolid University-Banco de Santander., Datasets of Figures 1-7 corresponding to a manuscript Glycolysis and hexosamine biosynthesis pathways in valve cells Sánchez-Bayuela T et al 2025, No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Biological parameters and respiration data of Pyrosoma atlanticum from DESAFIO cruise (January-March 2023) in Northeast Atlantic Ocean

  • Sarmiento Lezcano, Airam N.
  • Couret, Maria
  • Díaz-Pérez, Javier
  • Bernal Bajo, Ainhoa
  • Raya, Vanesa
  • Pla, Martín
  • Larrumbide-Zúñiga, Nicolás
  • Castellón, Arturo
  • Hernández León, Santiago
The values of carbon flux were measured in Pyrosoma atlanticum sampled during the DESAFIO cruise (North Atlantic, January-March 2023). This dataset contains the values of colony length, body width, body area, wet weight (two measurements), dry weight, specific ETS activity, respiration (three methods), and specific respiration (two models), analyzed along a transect from the north of the Azores Islands to the African coast, covering mainly the subtropical zone of the Atlantic Ocean. P. atlanticum specimens were collected using a "Mesopelagos" net (5 × 7 m mouth opening, 58 m total length) equipped with graded-mesh netting (starting with 30 mm and ending with 4 mm) and a multi-sampler for collecting samples from 7 different depth layers (Castellón and Olivar, 2023, doi:10.3390/jmse11010072), and the Multiple Opening/Closing Net and Environmental Sensing System (MOCNESS-1 m²) zooplankton net (Wiebe et al., 1985, doi:10.1007/BF00397811) with a 0.2 mm mesh size and several nets for sampling from 8 different depth layers. The Mesopelagos catches were sorted out and identified on board to the lowest possible taxon, and specimens selected for Electron Transfer System (ETS) analyses were immediately frozen in liquid nitrogen for later laboratory analysis. MOCNESS samples were preserved in 5% buffered formalin, and specimens were sorted later in the laboratory. Two approaches were used to estimate pyrosome active flux: (1) the enzymatic activity of the electron transfer system (ETS), and (2) a specific respiration equation (RC, Al-Mutairi and Landry (2001, doi:10.1016/S0967-0645(00)00174-0)) for P. atlanticum in the meso- and bathypelagic zones of the ocean. Colony length, body width, body area, wet weight, dry weight, specific ETS activity, respiration, and specific respiration are given by layer., Agencia Canaria de Investigación, Innovación y Sociedad de la Información (ACIISI), grant/award no. TESIS2022010116 Universidad de Las Palmas de Gran Canaria (ULPGC), grant/award no. ULPGC2022-2 Xunta de Galicia, grant/award no. IN606B-2024/018: Interacciones tróficas y procesos ecosistémicos en peces mesopelágicos (TROF-MP)., DisEntangling Seasonality of Active Carbon Flux In the Ocean (DESAFIO)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2024-001494-S)., This work contributes to the Institut de Ciències del Mar "Severo Ochoa Centre of Excellence" accreditation CEX2024-001494-S funded by AEI 10.13039/501100011033 of the Spanish Ministry of Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplemental material Glycolysis and hexosamine biosynthesis pathways in valve cells

  • Sánchez-Bayuela, Tania
  • Peral-Rodrigo Miriam
  • López, Javier
  • Gómez, Cristina
  • Pérez-Riesgo, Enrique
  • López-Andrés, Natalia
  • Fernández García, Nieves
  • San Román, José Alberto
  • Sánchez Crespo, Mariano
  • García-Rodríguez, Carmen
(1) Western blot assays for the immunodetection of proteins, i.e., adhesion molecules ICAM-1 and VCAM-1. Whole cell lysates were analyzed by separated by SDS-PAGE, 10% gels. Blots were incubated with primary antibodies recognizing the human form of intercellular adhesion molecule (ICAM)-1, vascular cell adhesion molecule (VCAM)-1. Data was normalized using antibodies recognizing the housekeeper gene β-tubulin. Densitometer FX and Quantity one software was used to acquire densitometry data for each blot. Images were exported to TIFF and the analysis of the band of interest was performed using Fiji software. Densitometry data were presented as arbitrary units normalized to β-tubulin. Data refer to the indicated biological replicates., (2) Supplementary tables including the demographics and comorbilities of valve donors (patients) used in the study., (3) Original uncropped blots are shown. Data correspond to the original non-edited and uncropped blots for each biological and technical replicate., [EN] Supplementary material includes supplemental figures and tables from studies aimed to investigate the role of inflammation and metabolic rewiring in protein maturation and successively to leukocyte adhesion, a pathogenetic process relevant to early stages of calcific aortic valve disease. Data from cellular models are derived from Western blot assays designed for the immunodetection of proteins, namely adhesion molecules and metabolic proteins. Major resources table includes a detailed list of antibodies and reagents used, as well as the study design. Finally, it includes the full unedited gels obtained in Western blot assays., [ES] El material complementario incluye figuras y tablas suplementarias de estudios destinados a investigar el papel de la inflamación y el remodelado metabólico en la maduración de proteínas y, sucesivamente en la adhesión de leucocitos, que es un proceso relevante en las primeras etapas de la enfermedad de la válvula aórtica calcificada. Los datos de los modelos celulares provienen de ensayos de Western blot diseñados para la detección inmune de proteínas, concretamente moléculas de adhesión y proteínas metabólicas. La tabla de recursos principales incluye una lista detallada de los anticuerpos y reactivos utilizados, así como el diseño del estudio. Finalmente, incluye los geles completos sin editar obtenidos en ensayos de Western blot., Ministerio de Ciencia e Innovacion (MICIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033 [PID2020-113751RB-I00, PID2024-160809OB-I00]; Junta de Castilla y León [VA175P20, Gerencia Regional de Salud GRS2205/A/2020, and Programa Estratégico Instituto de Biomedicina y Genética Molecular-Escalera de Excelencia Ref. CLU-2019-0]; Fundación Eugenio Rodríguez Pascual FERP-2024-60. Instituto de Salud Carlos III [CIBER de Enfermedades Cardiovasculares (CIBERCV) CB16/11/00260, CB16/00483]. Ministerio de Ciencia, innovación y Universidades and Fondo Europeo de Desarrollo Regional (FEDER) [EQC2019-006686-P]; Junta de Castilla y Léon, Valladolid University, and FEDER [IR2020-1-UVA05]. European Union's Recovery and Resilience Facility-Next Generation, in the framework of the General Invitation of the Spanish Government’s public business entity Red.es to participate in talent attraction and retention programs within Investment 4 of Component 19 of the Recovery, Transformation and Resilience Plan. We acknowledge support from CSIC Network on Metabolic Diseases (COMETA) funded by the Consejo Superior de Investigaciones Científicas (CSIC), Spain. PhD fellowships from Valladolid University-Banco de Santander., Supplemental Figures S1–S2 and Tables S1–S4, Major resources table, Original Uncropped Gels, No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Physical oceanography during RV Sarmiento de Gamboa DESAFIO cruise (January-March 2023) in Northeast Atlantic Ocean

  • Sarmiento Lezcano, Airam N.
  • Couret, Maria
  • Díaz-Pérez, Javier
  • Bernal Bajo, Ainhoa
  • Raya, Vanesa
  • Pla, Martín
  • Larrumbide-Zúñiga, Nicolás
  • Castellón, Arturo
  • Hernández León, Santiago
Depth, temperature, and conductivity were recorded during the DESAFIO cruise (from 31st of January to the 2nd of March 2023) using a SeaBird SBE 25plus CTD, the dissolved oxygen with a Seabird-43 sensor both attached to an oceanographic rosette from surface to a maximum depth of 2000 m, and the fluorometer with a Seapoint sensor in the upper 200 m depth. Fluorescence was converted to chlorophyll using samples at discrete depths for calibration. Chlorophyll a (Chl a) was measured filtering 500 ml of seawater through a 25 mm Whatman GF/F filter and freezing it at -20°C until its analysis in the laboratory. The extraction procedure consisted in placing the filter in 90% acetone at -20°C in the dark, during 24 h. Pigments were measured on a Turner Design 10A Fluorometer, previously calibrated with pure Chl a (Yentsch and Menzel, 1963, doi:10.1016/0011-7471(63)90358-9) and measured following the acidification method by Strickland and Parsons (1972, hdl:10013/epic.46454.d001)., Agencia Canaria de Investigación, Innovación y Sociedad de la Información (ACIISI), grant/award no. TESIS2022010116 Universidad de Las Palmas de Gran Canaria (ULPGC), grant/award no. ULPGC2022-2 Xunta de Galicia, grant/award no. IN606B-2024/018: Interacciones tróficas y procesos ecosistémicos en peces mesopelágicos (TROF-MP)., DisEntangling Seasonality of Active Carbon Flux In the Ocean (DESAFIO)., This work contributes to the Institut de Ciències del Mar "Severo Ochoa Centre of Excellence" accreditation CEX2024-001494-S funded by AEI 10.13039/501100011033 of the Spanish Ministry of Science and Innovation., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2024-001494-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Experimental data of manuscript Tailoring the structural and physicochemical properties of rice straw cellulose-based cryogels by cell-mediated polyhydroxyalkanoate deposition [DATASET]

  • Cabrera Villamizar, Laura A.
  • Campano, Cristina
  • López-Rubio, Amparo
  • Fabra, María José
  • Prieto, María Auxiliadora
This study presents a novel biotechnological approach for creating water vapor-resistant cryogels with improved integrity. Rice straw cellulose was transformed into nanofibrils through TEMPO-mediated oxidation and high-pressure homogenization. The resulting cryogels remained firm even when immersed in aqueous media, whose pores were used by live cell to deposit polyhydroxyalkanoate (PHA) particles inside them. This novel method allowed the compatibilization of PHA within the cellulosic fibers. As a consequence, the water sorption capacity was decreased by up to 6 times having just 4 % of PHA compared to untreated cryogels, preserving the cryogel density and elasticity. Additionally, this technique can be adapted to various bacterial strains and PHA types, allowing for further optimization. It was demonstrated that the amount and type of PHA (medium chain length and small chain length-PHA) used affects the properties for the cryogels, especially the water vapor sorption behavior and the compressive strength. Compared to traditional coating methods, this cell-mediated approach not only allows to distribute PHA on the surface of the cryogel, but also ensures polymer penetration throughout the cryogel due to bacterial self-movement. This study opens doors for creating cryogels with tunable water vapor sorption and other additional functionalities through the use of specialized PHA variants., Grants PID2020-112766RB-C21, PID2020-112766RB-C22 and PCI2024-153409 funded by MICIU/AEI/ 10.13039/501100011033 and, by ERDF A way of making Europe. Laura Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIA/2021/050). The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIN/AEI / 10.13039/501100011033 is also fully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Experimental data of manuscript PHA/PBAT biocomposites reinforced with rice straw lignocellulosic macromolecules: Decoding structure-property relationships through filler size and concentration [DATASET]

  • Cabrera Villamizar, Laura A.
  • Núñez, Eugenia
  • Reyes, Alcira
  • Lizundia, Erlantz
  • López-Rubio, Amparo
  • Fabra, María José
The environmental crisis caused by the accumulation of conventional plastics requires the development of sustainable alternatives. This study introduced a novel approach to valorize agricultural waste by engineering composite materials based on blends of poly(3-hydroxybutyrate-co-3-valerate) (PHBV) and polybutylene adipate terephthalate (PBAT) reinforced with rice straw (RS) as a possible alternative to conventional plastics. Composites were produced by melt compounding and compression molding, varying PHBV:PBAT mass ratios (80:20, 50:50, 20:80), RS particle sizes (≤250 μm and ≤ 500 μm), and RS concentration (20, 30 and 40 w/w %). Results showed that the polymer ratio and RS particle size significantly affected filler dispersion and film properties. Smaller RS particles and higher PHBV content (80:20) led to better homogenization, improved interfacial adhesion, and enhanced water vapor barrier properties, while 50:50 blends showed poor dispersion and higher permeability. Colorimetric analysis highlighted the role of RS size in composite coloration. FTIR confirmed that RS interacts physically with the polymers, not chemically. RS addition increased rigidity and water contact angle but reduced ductility, thermal stability, and crystallinity (depending on the concentration and particle size), and increased water vapor permeability. Disintegration tests revealed that only 80:20 blends met ISO 20200:2016 standards, while biodegradation, under industrial composting, was lower for RS-containing blends than controls, highlighting the role of environmental conditions and microbial communities. Life cycle assessment showed the composites had a cradle-to-grave climate change impact of 7.89–8.28 kg CO₂-eq·kg−1, which is lower than commercial plastics. These findings demonstrate the potential of rice straw as a sustainable filler for biodegradable PHBV/PBAT composites, offering promising alternatives for eco-friendly packaging applications., Grants PID2023-146557OB-C22 funded by MICIU/AEI/ 10.13039/501100011033 and, by ERDF A way of making Europe. The EVOLVEPACK project (Innovative Sustainable Packaging to Safeguard Our Food and Our Planet) is a contribution to PRIMA program (Partnership for Research and Innovation in the Mediterranean Area) funded by the European Union Horizon 2020 program and national research funding agency (PCI2024-153409). Laura Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolía grant (GRISOLIA/2021/050). EL acknowledges financial support from the University of the Basque Country (Convocatoria de ayudas a grupos de investigación GIU21/010). The Accreditation as Center of Excellence Severo Ochoa CEX2021-01189-S funded by MCIN/AEI / 10.13039/501100011033 is also fully acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

RadonFAN data, RadonFAN - Intelligent Real-Time Radon Mitigation through IoT, Rule-Based Logic, and AI Forecasting

  • Abad Azcutia, Lidia
  • Ramonet Marques, Fernando
  • González Hernández, Margarita
  • Anaya Velayos, José Javier
  • Aparicio Secanellas, Sofía
[Description of methods used for collection/generation of data] Through radon sensors, Raspberry Pi as control hub, ThingSpeak as could platform., [Methods for processing the data] Timestamp alignment, missing-value imputation (kNN), smoothing, and normalization as described in the associated publication., The dataset contains long-term indoor radon (Rn-222) measurements collected by the RadonFAN system in two underground galleries at ITEFI-CSIC (Madrid, Spain). Data were recorded every 10 minutes from October 2019 to December 2024 using low-cost radon sensors integrated into an IoT infrastructure. The dataset includes over 74,000 samples for Gallery 1 and 57,000 samples for Gallery 2, exhibiting different temporal dynamics: Gallery 1 shows relatively stable behavior, while Gallery 2 presents higher variability and faster radon increases. The dataset is designed for time-series classification, focusing on the anticipation of radon threshold exceedances for preventive ventilation control., Grant RPID2024-159276OB-C41 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU., File List: RG1 for Gallery 1 and RG2 for Gallery 2., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Shoreline position and emerged/submerged beach profiles at Castell beach (2019–2022) [Dataset]

  • Marco Peretó, Candela
  • Durán, Ruth
  • Simarro, Gonzalo
  • Guillén, Jorge
In this study, repeated topographic and bathymetric surveys were conducted to characterise shoreline position and beach morphology at Castell Beach (Catalonia, Spain) between 2019 and 2022. Six RTK-GNSS field campaigns were carried out to measure shoreline position and emerged beach topography, complemented by three echo-sounder bathymetric surveys to characterise the submerged beach. RTK-GNSS data were collected across the subaerial beach and swash zone, while single-beam and multibeam echo-sounder measurements were used to measure the shoreface. The resulting dataset includes shoreline positions and representative emerged and submerged beach profiles, which can be used to analyse coastal morphological changes. The data were used to calculate volume variations and shoreline displacements following two extreme storm events, as well as the subsequent recovery, Morphological variability on Mediterranean embayed sandy beaches is largely driven by wave storms and episodic sediment inputs from local streams during intense rainfall. While storm impacts are well documented, the combined influence of stream discharge, wave forcing and morphological response remains poorly understood. This study examines these interactions at Castell beach, one of the few non-urbanised, stream-fed embayed beaches on the northwestern Mediterranean, during two high-energy storms with heavy rainfall: December 2019 and January 2020 (Storm Gloria). Morphological changes in the subaerial and submerged beach, and stream dynamics were assessed using repeated RTK-GNSS surveys, orthophotos and echo-sounder bathymetry. Results show the stream mouth shifted along the beach (east, central or west) during heavy rainfall episodes depending on wave direction and pre-existing topography, tending toward more wave-sheltered zones. The storms induced contrasting responses: the first caused slight subaerial accretion, whereas Storm Gloria produced subaerial erosion and nearshore sediment deposition from both beach and stream sources. This material was subsequently reworked and reincorporated into the subaerial beach under calmer conditions, with full recovery by February 2022. These findings highlight the role of stream–wave interactions in sediment dynamics and the capacity of highly protected embayed beaches to adapt to extreme events, This work has been carried out in the framework of the MOLLY (PID2021-124272) and SOLDEMOR (TED2021-130321B-I00) research projects funded by the Spanish Ministry of Science, Innovation and Universities and the Catalan Government Excellent Research Groups (2021-SGR-00433). It contributes to the Severo Ochoa Centre of Excellence program through Grant CEX2024-001494-S funded by AEI 10.13039/501100011033. C. Marco-Peretó is supported by Spanish FPI grant (PRE2022-101492), With funding form the Spanish government through the "Severa Ochoa Centre of Excellence" accreditation (CEX2024-001494-S)., - readme.txt - castell_shorelineposition_ETRS89_UTM31N.txt - castell_emergedprofiles_ETRS89_UTM31N_EGM08D595.txt - castell_submergedprofiles_ETRS89_UTM31N_EGM08D595.txt, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

LipidON: A reference lipidomic dataset of the mouse optic nerve

  • Simó, Carolina
  • García-Martín, Gonzalo
  • Lorenzo, M. Paz
  • Cubelos, Beatriz
  • García-Cañas, Virginia
  • Mamani-Huanca, Maricruz
Data acquisition was performed on two different dates. Iterative MS/MS analyses of pooled samples were acquired on 15 July 2024 in both positive and negative ionization modes. Full-scan data, including QC samples and extraction blanks, were acquired in positive ionization mode on 27 January 2025 and in negative ionization mode between 27 and 28 January 2025., This work was supported by the Spanish Ministry of Science, Innovation and Universities to Maricruz Mamani-Huanca (JDC2022-049517) and to Beatriz Cubelos (PDI2021-123269OB-I00 & PID2024-160510OB-I00)., File List: https://saco.csic.es/s/PwRjAfKcWkpi5zH, No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Exploring composites of alternative flour sources and marine biomass residues for sustainable degradable food packaging films [DATASET]

  • Hernández-García, Eva
  • Escalante Aburto, Anayansi
  • Fabra, María José
  • López-Rubio, Amparo
This study proposes an innovative strategy to valorise agricultural and marine by-products by developing sustainable films based on different pigmented popcorn and sorghum flours, rich in bioactive polyphenols and starch, combined with holocellulosic residue from Gelidium corneum (marine biomass), a by-product of industrial agar extraction, as a possible alternative to conventional plastics. Films were produced by melt-compounding and compression-moulding with a 40:60 w/w ratio of popcorn or sorghum flour to algae residue and were compared to control films without marine biomass. The effect of incorporating and storing marine biomass was investigated. Results showed that the addition led to a more heterogeneous film morphology and modified the optical properties of the marine biomass films, decreasing luminosity, whiteness index, and internal transmittance, while enhancing yellow and green hues due to pigment interactions, with significant changes occurring during storage. In general, incorporating marine biomass increased tensile strength and stiffness, reduced elongation at break, and, upon storage, further enhanced rigidity through starch retrogradation. Additionally, the presence of biomass modulated water vapor permeability, water uptake, and hydrophobicity. These findings demonstrate the potential of combining pigmented popcorn and sorghum flours with Gelidium corneum residue as sustainable composite films, representing a promising strategy for environmentally friendly packaging., The authors acknowledge the Juan de la Cierva Formación post-doctoral contract awarded to Eva Hernández-García by the Spanish Ministry of Science and Innovation (JDC2023-05I858-I) and grant PID2022-138328OB-C21 and PCI2024-153409 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”. This work was supported by EVOLVEPACK project, a PRIMA-Horizon 2020. The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIN/AEI / 10.13039/501100011033 is also fully acknowledged. Escalante-Aburto thanks the support of Challenge-Based Research Funding 2022 of Tecnologico de Monterrey [I008 - IOR001 - C6-T1 - E, November 3, 2022]., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Raw data regarding rheological characterization, pore size determination and distribution, printability and oil sorption and revovery tests of the materials employed in the study: “3D-Printed Alginate/BSA-Based Aerogels: Freeze-Drying Strategies for Tunable Porosity and Enhanced Oil Sorption and Chemical-free Recovery

  • Mercado-Rico, Jorge
  • Esteban-Arranz, Adrián
  • Pérez, Luis Andrés
  • Hernández-Sosa, Alejandro
  • Gallego-Mena, Lidia
  • Capezza, Antonio J.
  • Sánchez-Silva, Luz
  • Hernández, Rebeca
[Methods for processing the data] The files contain raw data obtained through rheological measurements, pore size determination and printability tests are organized in EXCEL files to improve visualization, [Description of methods used for collection/generation of data] Rheological data. A rheometer, AR-G2, from TA instruments® was used to determine the rheological properties of the different biomaterial inks at 25 °C. Flow sweep experiments were performed varying the shear rate values from 0.001 s-1 to 100 s-1. The geometry used was a 25 mm parallel plate with 1000 µm gap. Viscosity flow curves (viscosity vs. shear rate) were obtained, and a mathematical model known as the Power Law equation (Eq. 1) was fitted to these curves. η "\= " K"\ " γ ˙^(n"\-"1) (1) where η is the viscosity; γ ˙ is the shear rate; and K and n are the fitting parameters. The parameter K represents the viscosity of the ink at a shear rate of 1 Pa/s. The parameter n is inversely proportional to the shear-thinning behavior of the material, and low values of n (n < 1) indicate a shear thinning behavior. Oscillatory strain sweeps from 0.01 % to 200 % strain at 1.0 Hz constant frequency were carried out to define the linear viscoelastic region. Frequency sweeps experiments that ranged from 0.01 Hz to 10 Hz at 0.1 % strain were run to obtain the storage modulus values at 1.0 Hz of each biomaterial ink. Dynamic oscillatory strain cycles were run at 1.0 Hz to obtain the recovery value of each biomaterial ink's storage modulus. For these experiments, two consecutive cycles were employed. For each cycle, a 0.1 % strain deformation for 200 s followed by a 200 % strain deformation for 200 s was applied. All measurements were carried out at room temperature. Printability tests. The uniformity factor (U) was employed to assess the degree to which the filament deviated from a perfectly straight filament. Using Image J®, the outer boundary on both sides of the filament was manually measured. The obtained length was then divided by the length of a straight reference line, providing the value of U (Eq. 2). Here, U = 1 denotes a fully uniform filament, whereas values above 1 reflect deviations from uniformity. U "\= " (length"\ "of"\ "printed"\ "filament"\ ")/(length"\ "of"\ "theorical"\ "straight"\ "filament) "\ " (2) For the determination of the printability index (Pr), a square scaffold measuring 25 × 25 mm was printed in two layers, each with a height of 0.8 mm, using a zigzag infill pattern with a 5 mm distance between filling lines, resulting in internal squares measuring approximately 5 × 5 mm. The area of these squares was quantified using Image J software, and the values were used to calculate the average printability index (Pr) according to Eq. 3. Based on this index, three gelation states are identified: insufficient gelation (Pr < 1), adequate gelation (Pr = 1), and excessive gelation (Pr > 1). Pr "\= " π/4 x 1/C " \= " L^2/16A "\ " (3) where C represents the circularity of the enclosed area (C "\=" 4πA/L^2 ), L is the perimeter y A is the area. To quantify printing deviations, the measured dimensions (height and diameter) were compared with the corresponding CAD designs according to Eq. 4 [22]. Deviation (%)" \= " ((Measured-Designed))/Designed*100 (4) Average Pore size. The average pore size ∅"\ " , was calculated using ImageJ® software. Micrographs were calibrated using the scale bar to ensure accurate measurements, and pore dimensions were obtained by calculating the equivalent circular diameter from the measured pore area. The results were expressed as mean ± standard deviation (SD) to describe the pore size distribution. Pore size distribution. Pore size distribution was also determined by mercury intrusion porosimetry, MIP, (Poremaster, Quantachrome Instruments), combining low-pressure (up to 55 psi) and high-pressure (up to 33,000 psi) measurements to assess meso and macroporosity. Mercury was intruded into the pore system under increasing pressure, and the cumulative intruded volume was recorded to calculate throat size distribution and accessible porosity. Oil sorption, retention and recovery. For measurements of the uptake capacity, three pieces of the dry samples were fully immersed in the oil for 30 min, then carefully removed, and the excess oil was eliminated with tissue paper. The oil uptake was calculated as the average mass of oil sorbed, expressed as grams of oil per gram of dry material. 30 min was used as testing sorption time due to the equilibrium observed when doing free swelling capacity measurements (FSC) at different times. The oil sorption capacity was calculated as the mass of sorbed oil per gram of dry material (g/g). Subsequently, the oil-loaded samples were placed inside a plastic teabag and centrifuged at 1230 rpm for 3 min. The samples were then weighed again, and the oil retention capacity was determined as the mass of retained oil per gram of dry material (g/g). For reusability tests, the centrifuged samples were re-immersed in oil for an additional 30 min, and the sorption–centrifugation procedure was repeated for consecutive cycles under identical conditions. The amount of oil recovered was calculated as the difference between the oil sorbed after the 30 min immersion step and the oil retained after centrifugation. Oil recovery was expressed as a percentage relative to the initially sorbed oil. All measurements were performed in triplicate, and the reported values correspond to mean ± standard deviation., [Environmental/experimental conditions] If the text does not specify it, normal conditions are assumed., This dataset contains raw data obtained for the determination of rheological propesties, printability assessment, average pore size, pore size distribution, oil sorption test and oil sorption, retention and recovery tests organized in EXCEL files and employed in the study “3D-Printed Alginate/BSA-Based Aerogels: Freeze-Drying Strategies for Tunable Porosity and Enhanced Oil Sorption and Chemical-free Recovery”., This research was financially supported by the projects M-ERA. NetCOFUND2023 PCI2024-153508 funded by MCIU/ AEI/10.13039/501100011033. J.M.R., A.E.A., L.A.P. and R.H., are members of the Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy (SusPlast+) from the Spanish National Research Council (CSIC) (CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094). MSc Norra Boone is acknowledged for her assistance during the FSC tests, - Rheological propesties - Printability assesment - Average pore size - Pore size distribution - Oil sorption test - Oil sorption, retention and recovery, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Engineering Penicillium expansum antifungal proteins unveils new clues about their mode of action [DATASET]

  • Giner Llorca, Moisés
  • Gallego del Sol, Francisca
  • de Ovalle, Stefani
  • Thomson, Darren D.
  • Bignell, Elaine M.
  • Marina, Alberto
  • Marcos López, José Francisco
  • Manzanares, Paloma
Fungal antifungal proteins (AFPs) are promising biofungicides. PeAfpA and PeAfpB from Penicillium expansum show different activity profiles and potency, with PeAfpA being more active. Based on the PeAfpB solved structure, we had previously designed PeAfpB-PeAfpA chimeras that showed different properties. From these, we engineer here two additional variants, chPeAFPV6 and chPeAFPV7, that revealed novel aspects of the AFP structure, antifungal determinants and mechanism. chPeAFPV6, with a single E11K mutation in the loop L1 that is part of the γ-core motif, increased PeAfpB antifungal activity to that of PeAfpA against filamentous fungi but not yeasts, and promoted internalisation into Penicillium digitatum hyphae. However, changes in loop L3 of PeAfpB as in chPeAFPV7 abolished this increase, resulting in an inactive protein that still internalised. Overall, internalisation is neither sufficient nor essential for killing P. digitatum. Antifungal activity did not correlate with reactive oxygen species production, suggesting that oxidative burst is a fungal stress defence rather than a killing mechanism. Although cell permeabilisation was associated with antifungal activity, it does not seem to be a primary mode of action. Structural analysis showed interactions between the γ-core motif and loop L3, and suggests the importance of the conformation of the E7 residue of PeAfpB. Additionally, PeAfpA was identified as a protein able to penetrate Candida auris by a cell wall-dependent mechanism, and kill yeast cells. This study highlights the potential of the PeAfpB scaffold for engineering new-to-nature AFPs and provides novel insights into their modes of action, paving the way for future applications., This work was supported by grants PID2021-125858OB-I00, PID2024-162516OB-I00 (to PM and JFM), PID2022-137201NB-I00 (to AM) funded by MCIN/AEI/ 10.13039/501100011033, the Severo Ochoa Excellence Program CEX2021-001189-S by “ERDF, a way of making Europe”, and CIPROM/2023/30 (to AM) by Valencian Government (Conselleria de Educación, Investigación, Cultura y Deporte). MGL was a recipient of the predoctoral grant FPU19/02066 funded by MCIN/AEI/10.13039/501100011033 and by ESF-Investing in your future, respectively. MGL international exchange was supported by EST23/00233 grant (funded by MCIN/AEI/10.13039/ 501100011033 and by ESF-Investing in your future) and SEG10314 EMBO Scientific Exchange Grant. We acknowledge funding from the MRC Centre for Medical Mycology at the University of Exeter (MR/N006364/2 and MR/V033417/1), the NIHR Exeter Biomedical Research Centre (NIHR203320) The views expressed are those of the authors and not necessarily those of the NIHR or the Department of Health and Social Care. The structural results reported in this article derive from measurements made at the synchrotron ALBA (Cerdanyola del Valles, Spain) and ESRF (Grenoble, France). Data collection experiments for the best crystals were carried at XALOC beamlines at ALBA. X-ray diffraction data collection was supported by block allocation group (BAG) ALBA Proposal 2023077633 and ESRF proposal MX-25s7., Figure 1_data: Figure 1C_raw data.xlsx; Figure 1C_readme.txt.-- Figure 2_data: Figure 2B_raw data.xlsx; Figure 2B_readme.txt; Figures 2A-2C_raw data.xlsx;Figures 2A-2C_readme.txt.-- Figure 4_data: Figure 4_original images.zip; Figure 4_processed_straightens.zip; Figure 4_readme.txt.-- Figure 4_data: Figure 5_original images.zip; Figure 5_processed images.zip; Figure 5_readme.txt.-- Figure 6_data: Figure 6_original images.zip; Figure 6_processed images.zip; Figure 6_readme.txt.-- Supplementary Figure S2_data: Aspergillus westerdijkiae.xlsx; Botrytis cinerea.xlsx; Candida auris_B121040.xlsx; Fusarium oxysporum.xlsx; Penicillium expansum_CMP1.xlsx; Penicillium roqueforti.xlsx; Supplementary Figure S2_readme.txt.-- Supplementary Figure S3_data: Supplementary Figure S3_raw data.xlsx; Supplementary Figure S3 readme.txt.-- Supplementary Figure S4_data: chPeAFPV6_BF.tif; chPeAFPV6_G.tif; chPeAFPV7_BF.tif; chPeAFPV7_G.tif; PeAfpA_BF.tif; PeAfpA_G.tif; PeAfpB_BF.tif; PeAfpB_G.tif; Supplementary Figure S4_readme.txt, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Opuntia extract-supplemented and control (estabilization and wash-out periods) microbiota [DataSet]

  • Parralejo-Sanz, Sara
  • Yépez-Notario, Cristina
  • Cano, M. Pilar
  • Requena, Teresa
Faecal microbiota from a healthy adult donor was inoculated into the three colon reactors (AC: acending colon, TC: transverse colon, and DC: desending colon) of the BFBL gut simulator. An initial 7-day stabilization period of the microbial community was performed to reach the steady state prior to the extract supplementation. After this stabilization period, 1g of Opuntia extract was added each day (for 7 days) supplemented to the simulator at the ‘breakfast’ stage. Finally, another 7-day wash-out period was included. This complete process was performed three times, as extracts from three different Opuntia varieties were tested: Opuntia stricta var. dillenii (OD), Opuntia ficus-indica var. Colorada pulp extract (COL), and Opuntia ficus-indica var. Blanca peel extract (BB). It was performed sequentially and each assay included independent stabilization and wash-out phases between treatments. During the experimental set up, samples were collected every 24 h from the three colon reactors (AC, TC, and DC) and centrifuged (10,000 ×g during 10 min at 4 °C), and the pellet was used for bacterial genomic DNA extraction (EZNA® Bacterial DNA Kit, Omega Biotek) and using a FastPrep equipment for mechanical lysis (Bio 101 FastPrep FP120, Savant Instruments). The extracted DNA underwent amplicon-based metagenomic sequencing targeting the full-length 16S rRNA gene that was sequenced by Novogene (Munich, Germany) using the PacBio Sequel II/IIe platform., In all files, colonic reactors are labelled as R1, R2, R3, for AC, TC and DC, respectively. In the files corresponding to the assay performed with O. dillenii whole fruit extract (OD), T4, T5, and T6, refer to the three replicates analyzed in the stabilization period before supplementation with OD (labelled as STAB in the article). T18, T20 and T22 refer to the three replicates analyzed during supplementation of the simulator with OD. T28, T29, and T30 refer to the three replicates analyzed in the wash-out period after supplementation with OD. In the files corresponding to the assay performed with O. ficus-indica var. Colorada pulp extract (COL) and O. ficus-indica var. Blanca peel extract (BB), T5, T6, and T7, refer to the three replicates analyzed in the stabilization period before supplementation with COL (labelled as STAB in the article). T11, T13 and T14 refer to the three replicates analyzed during supplementation of the simulator with COL. T17, T18, and T19 refer to the three replicates analyzed in the wash-out period after supplementation with COL, but also to the stabilization period before supplementation with BB. T24, T25 and T26 refer to the three replicates analyzed during supplementation of the simulator with BB. T29, T30, and T31 refer to the three replicates analyzed in the wash-out period after supplementation with BB., This research was funded by project PID 2020-118300RB-C21 from MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe” and supported by PID2022-136874OB-C31, PID2024-158847OB-I00, PREP2022-000376, and the MaX CSIC Excellence Award DEEP-MaX-2024-2_CIAL., In all files, colonic reactors are labelled as R1, R2, R3, while in the manuscript as AC, TC and DC, respectively. In the files corresponding to the assay performed with O. dillenii whole fruit extract (OD), T4, T5, and T6, refer to the three replicates analyzed in the stabilization period before supplementation with OD (labelled as STAB in the manuscript). T18, T20 and T22 refer to the three replicates analyzed during supplementation of the simulator with OD. T28, T29, and T30 refer to the three replicates analyzed in the wash-out period after supplementation with OD (labelled as W/O in the manuscript). In the files corresponding to the assay performed with O. ficus-indica var. Colorada pulp extract (COL) and O. ficus-indica var. Blanca peel extract (BB), T5, T6, and T7, refer to the three replicates analyzed in the stabilization period before supplementation with COL (labelled as STAB in the manuscript). T11, T13 and T14 refer to the three replicates analyzed during supplementation of the simulator with COL. T17, T18, and T19 refer to the three replicates analyzed in the wash-out period after supplementation with COL (labelled as W/O in the manuscript), but also to the stabilization period before supplementation with BB (labelled as STAB in the manuscript). T24, T25 and T26 refer to the three replicates analyzed during supplementation of the simulator with BB. T29, T30, and T31 refer to the three replicates analyzed in the wash-out period after supplementation with BB (labelled as W/O in the manuscript)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Unraveling Thermal Interactions in Lanthanide-Doped Phosphors: A Frequency-Domain Analysis Approach [Dataset]

  • Romero Aguilar, Manuel
  • Castaing, Victor
  • Rytz, Daniel
  • Lozano, Gabriel
  • Míguez, Hernán
Ensuring the thermal reliability of luminescent materials is a key requirement for next-generation lighting, display, and sensing technologies. The intricate interplay of thermal crossover and thermal ionization in lanthanide-doped phosphors often obscures their individual contributions. We present a frequency-domain photoluminescence analysis that disentangles these competing mechanisms. Using single crystals of SrAl₂O₄:Eu²⁺,Dy³⁺ (SAO:Eu,Dy) and (Gd₀.₃₃Y₀.₆₇)₃Al₂.₄Ga₂.₆O₁₂:Ce3+,Cr3+ (GYAGG:Ce,Cr) as model systems, we extract temperature-dependent trapping efficiencies and decay rates by analyzing the phase and amplitude response of luminescence under modulated excitation. Our approach reveals distinct signatures of thermal ionization and enables the direct quantification of ionization barriers and crossover rates. We demonstrate that SAO:Eu,Dy exhibits dominant trapping behavior with high ionization efficiency, while GYAGG:Ce,Cr shows significant competition between ionization and crossover. This method provides a powerful framework for resolving overlapping quenching pathways and offers new insights for the design of thermally robust luminescent materials., This project has received funding from the BBVA Foundation Leonardo Grant for Physics Researchers 2023, and from the Spanish Ministry of Science and Innovation under grant EUR2023-143467 funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGeneration EU/PRTR, and PID2024-161708OB-I00 funded by MCIN/AEI/10.13039/501100011033 and ERDF/EU. MR acknowledges the grant FPU23/01435 funded by MCIN/AEI/10.13039/501100011033. V.C. acknowledges Junta de Andalucía for financial support (POSTDOC_21_00694)., - Fig1b_emi.txt : PL spectra of SAO:Eu,Dy at 200K: Wavelength in nm (column 1), intensity in detector counts (column 2). - Fig1b_exc.txt : Excitation spectra of SAO:Eu,Dy at 200K: Wavelength in nm (column 1), intensity in detector counts (column 2). - Fig1c_emi.txt : PL spectra of GYAGG:Ce,Cr at 200K: Wavelength in nm (column 1), intensity in detector counts (column 2). - Fig1c_exc.txt : Excitation spectra of GYAGG:Ce,Cr at 200K: Wavelength in nm (column 1), intensity in detector counts (column 2). - Fig1d.txt : PL quenching curves of SAO:Eu,Dy: Temperature in K (column 1), intensity in detector counts for an excitation density of 4mW/cm2 (column 2), intensity in detector counts for an excitation density of 0.04mW/cm2 (column 3). - Fig1e.txt : PL quenching curves of GYAGG:Ce,Cr: Temperature in K (column 1), intensity in detector counts for an excitation density of 4mW/cm2 (column 2), intensity in detector counts for an excitation density of 0.04mW/cm2 (column 3). - Fig2a.txt : Real part of the transfer function (Hr) as a function of temperature for SAO:Eu,Dy: Data is given in a matrix form with the first column corresponding to frequency in Hz and the first row corresponding to temperature in K. - Fig2b.txt : Imaginary part of the transfer function (Hi) as a function of temperature for SAO:Eu,Dy: Data is given in a matrix form with the first column corresponding to frequency in Hz and the first row corresponding to temperature in K. - Fig2d.txt : Real part of the transfer function (Hr) as a function of temperature for GYAGG:Ce,Cr: Data is given in a matrix form with the first column corresponding to frequency in Hz and the first row corresponding to temperature in K. - Fig2e.txt : Imaginary part of the transfer function (Hi) as a function of temperature for GYAGG:Ce,Cr: Data is given in a matrix form with the first column corresponding to frequency in Hz and the first row corresponding to temperature in K. - Fig3a_SAO.txt : Trapping efficiency as a function of temperature for SAO:Eu,Dy: Temperature in K (column 1), trapping efficiency (column 2). - Fig3a_GYAGG.txt : Trapping efficiency as a function of temperature for GYAGG:Ce,Cr: Temperature in K (column 1), trapping efficiency (column 2). - Fig3b_SAO.txt : Trapping rate and total decay rate as a function of temperature for SAO:Eu,Dy: Temperature in K (column 1), trapping rate in Hz (column 2), total decay rate in Hz (column 3). - Fig3b_GYAGG.txt : Trapping rate and total decay rate as a function of temperature for GYAGG:Ce,Cr: Temperature in K (column 1), trapping rate in Hz (column 2), total decay rate in Hz (column 3)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Audio Deepfakes and Synthetic Media: Reading list [DATASET]

  • San Segundo Fernández, Eugenia
  • López Jareño, Aurora
  • Rodríguez Sánchez, Vega
[EN] This is a curated reading list on audio deepfakes and synthetic media; that is, an expert-selected guide to the most relevant publications and resources on this topic published in recent years. The curators reviewed a wide range of sources, selected the most relevant and reliable ones, and organized them according to criteria such as the type of deepfake, modality, language, and intended audience (specialized or general), among others., [ES] Esta es una lista de lecturas seleccionadas sobre deepfakes de audio y contenidos digitales sintéticos; es decir, una guía elaborada por expertos que reúne algunas de las publicaciones y recursos más relevantes sobre este tema aparecidos en los últimos años. Para elaborarla, revisamos una amplia variedad de fuentes y seleccionamos aquellas que consideramos más relevantes y fiables. Posteriormente, organizamos los materiales según distintos criterios, como el tipo de deepfake, la modalidad, el idioma y el público objetivo —especializado o general—, entre otros., This work is part of the research project How deep(fake) is your voice? Understanding the linguistic foundations of deepfakes (grant PID2021-124995OA-I00 funded by MICIU/AEI/ 10.13039/501100011033 and by ERDF/EU) and the project WAV: The WAves (and wrinkles) of our Voice (grant PID2024-161495OB-I00 funded by MICIU/AEI/ 10.13039/501100011033 and by ERDF/EU)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Structural insights into the antibacterial function of the Pseudomonas putida effector Tke5 [Dataset]

  • Velázquez, Carmen
  • Zabala, Maialen
  • Paredes, Carmen
  • Civantos, Cristina
  • Altuna, Jon
  • Bernal, Patricia
  • Albesa-Jové, David
Pseudomonas putida is a plant-beneficial rhizobacterium that encodes multiple type-VI secretion systems (T6SS) to outcompete phytopathogens in the rhizosphere. Among its antibacterial effectors, Tke5 (a member of the BTH_I2691 protein family) is a potent pore-forming toxin that disrupts ion homeostasis without causing considerable membrane damage. Tke5 harbours an N-terminal MIX domain, which is required for T6SS-dependent secretion in other systems. Many MIX domain-containing effectors require T6SS adaptor proteins (Tap) for secretion, but their molecular mechanisms of adaptor-effector binding remain elusive. Here, we report the 2.8 Å cryo-EM structure of the Tap3-Tke5 complex of P. putida strain KT2440, providing structural and functional insights into how effector Tke5 is recruited by its cognate adaptor protein Tap3. Functional dissection shows that the α-helical region of Tke5 is sufficient to kill intoxicated bacteria, while its β-rich region likely contributes to target membrane specificity. These findings delineate a mechanism of BTH_I2691 proteins for Tap recruitment and toxin activity, contributing to our understanding of a widespread yet under-studied toxin family., Ministerio de Ciencia e Innovación (MCIN): PID2021-127816NB-I00 PID2021-123000OB-I00 PID2024-155225NB-I00 PID2024-159235OB-I00 CNS2022-135585; Eusko Jaurlaritza (Gobierno Vasco): IT1745-22; Generalitat de Catalunya (Government of Catalonia): IU16-014045, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset for "Magneto-ionic control of magnetism through voltage-driven carbon transport" manuscript

  • Tan, Zhengwei
  • Ma, Zheng
  • Privitera, S.
  • Liedke, Maciej O.
  • Hirschmann, Eric
  • Wagner, Andreas
  • Costa Krämer, José Luis
  • Quintana, Alberto
  • García-Tort, A.
  • Herrero Martín, Javier
  • Mei, Yongfeng
  • Chen, Xiang-Zhong
  • Tan, Huan
  • Fina, Ignasi
  • Sánchez Barrera, Florencio
  • Arredondo-López, A.
  • Ibrahim, Fatima
  • Chshiev, Mairbek
  • Longo, E.
  • Rovirola, M.
  • Macià, F.
  • Lopeandía, Aitor
  • Nogués, Josep
  • Pellicer, Eva
  • Sort, Jordi
  • Menéndez, Enric
These datasets support the findings published in the manuscript entitled "Magneto-ionic control of magnetism through voltage-driven carbon transport"., Spanish Government (PID2024-156385OB-I00); MCIN/AEI/10.13039/501100011033 & European Union NextGenerationEU/PRTR (grant Nº CNS2022-135230); European Research Council (2021-ERC-Advanced REMINDS Grant Nº 101054687); France 2030 government grant managed by the French National Research Agency PEPR SPIN ANR-22-EXSP 0009 (SPINTHEORY); The ICN2 is supported by the Severo Ochoa Centres of Excellence program, Grant CEX2021-001214-S, grant funded by MCIU/AEI/10.13039/501100011033; Instrumentation financed through Grant IU16-014206 (METCAM-FIB) to ICN2 funded by the European Union through the European Regional Development Fund (ERDF), with the support of the Ministry of Research and Universities, Generalitat de Catalunya; Generalitat de Catalunya (2021-SGR-00651 and 2021-SGR-00804), With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary material to Influence of the physical properties of electrolytes on the behavior of all-vanadium redox flow batteries [dataset]

  • Ibañez, Álvaro
  • Montiel, Manuel
  • Tejero, Andrés
  • Ortiz de Landazuri Suárez, Ignacio
  • Lozano Fantoba, Antonio
  • Barroso Estébanez, Jorge
  • Barreras Toledo, Félix
Under a Creative Commons BY-NC-ND 4.0 license., Viscosity measurements: Fig. S1. Left: Original rheometer metallic spindle. Right: Modified spindle machined in PVC.; Table S1. Relevant dimensions of the two rheometer spindles; Experimental data from the facility: Table S2. Hydraulic model testing. Experimental points; Table S3. VRFB experiments. Duration of each cycle, expressed in hours.; Table S4. VRFB experiments. Electric charge of each cycle stage, expressed in A·h.; Experiments 1-4. Magnitudes evolution: Fig. S2. Experiment 1. Top: Evolution of electrolyte flow rates. Bottom: Evolution of stack voltage (red line) and current (black line). Fig. S3. Experiment 2. Top: Evolution of electrolyte flow rates. Bottom: Evolution of stack voltage (red line) and current (black line).; Fig. S4. Experiment 3. Top: Evolution of electrolyte flow rates. Bottom: Evolution of stack voltage (red line) and current (black line). Fig. S5. Experiment 4. Top: Evolution of electrolyte flow rates. Bottom: Evolution of stack voltage (red line) and current (black line).; Sensitivity analysis Q-T-SOC: Fig. S6. Top: positive electrolyte. Bottom: negative electrolyte. Left: λ parameter. Right: discretized λ values grouped in four levels., This research has been developed within the CSIC Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+) as part of the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094. The authors would like also to acknowledge the financial support provided by the Spanish Ministry of Science, Innovation and Universities under projects MAFALDA (ref.: PID2021-126001OB-C32) and DECODER (ref.: PID2024-158394OB-C21), and to the Aragon Government, Spain, under the projects T06_23R and FLUFEE (PROY_T53_24)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary files of Mutant calreticulin enables potent and selective CAR-T cell therapy in preclinical models of myeloproliferative neoplasms [dataset]

  • Pesini, Cecilia
  • Gil Bellido, Mario
  • Millan, Lorena S.
  • Oñate, Carmen
  • Calvo Pérez, Adanays
  • Santiago, Llipsy
  • Iglesias, Eldris
  • Bernal, Jorge Paúl
  • Araujo-Voces, Miguel
  • Paz Artigas, Laura
  • García-Martínez, Laura
  • Roig, Francisco J.
  • Movilla, Nieves
  • García-Aznar, José Manuel
  • Olave, María Teresa
  • Azaceta, Gemma
  • Garrote, Marta
  • Alvarez-Larrán, A.
  • Gálvez Buerba, Eva Mª
  • Sánchez Martínez, Diego
  • Arias, Maykel
  • Pardo, Julián
  • Ramírez-Labrada, Ariel
Under a Creative Commons BY - NC 4.0 license.-- Material and methods: Cell lines culture, genetic modifications, and drug treatment. The MARIMO (Acute myeloid leukemia), HEL (Erythroleukaemia cells homozygous for JAK2 V617F mutation), K562 (Chronic myelogenous leukemia, BCR-Abl+), and THP-1 (Acute monocytic leukemia, JAK2 wt) cell lines were cultured in RPMI medium (Sigma-Aldrich). The Steffen Koschmieder laboratory kindly provided the MARIMO cell line after an MTA agreement with the Yuichi Ishikawa laboratory. HEK293T, A549, HepG2, PANC-1, PC-3, MDA-MB-231, and NHCF-v cell lines were cultured in DMEM (Sigma-Aldrich). Mediums were supplemented with 10% fetal bovine serum (FBS, Capricorn Scientific) and 1% penicillin/streptomycin (Pen/Strep, Sigma-Aldrich). HEL, K562, and THP-1 tumor cell lines were genetically modified to express ZsGreen-FireFly Luciferase (ZsGreen-FFLuc) and mutated calreticulin (mCALR) using lentiviral particles, obtained by co-transfecting HEK293T cells with the psPAX2 (Addgene #12260), the pMD2.G plasmids (Addgene #12259), and the lentiviral interest plasmid (pCCL1 Luc-T2A-ZsGreen and pCCL1 mCALR-T2A-RFP), by using PEI (Sigma-Aldrich). The mCALR sequence identified in the MARIMO cell line (del61), resembling a type 1-like mutation, was used to transduce HEL, K562, and THP-1 cell lines. All resulting cell lines expressed luciferase, ZsGreen (wt), and mCALR-expressing cells (mCALR+) co-expressed RFP protein. Fluorescence-activated cell sorting was used to isolate modified cell populations based on fluorescent protein expression, and mCALR expression was validated by flow cytometry and immunoblotting. Proliferation was evaluated between wild-type and mCAR+ derivative cell lines by Incucyte (Supplementary Figure 2). To knock out mCALR in MARIMO cells, a lentiviral CRISPR/Cas9 system was employed using the lentiCRISPRv2 (Addgene #52961) and lentiGuide-Puro (Addgene #52963) plasmids. A specific single guide RNA (sgRNA) targeting the mCALR was designed following the system requirements and cloned into the BsmBI site of the lentiCRISPRv2 vector following the protocol by Shalem et al. 1. The oligo sequences used were: (oligo 1: CACCGACGAGGAGCAGAGGATGATG, oligo 2:AAACCATCATCCTCTGCTCCTCGTC, Life Technologies). Loss of mutant CALR expression was confirmed by immunoblotting (see below). For venetoclax treatment, the IC50 was determined for each cell line, and a dose below the calculated IC50 was selected for subsequent experiments (Supplementary Figure 15). hiPSC differentiation into cardiomyocytes (hiPSC-CMs) Human induced pluripotent stem cells (hiPSCs; IPSC0028, Sigma-Aldrich) were differentiated into cardiomyocytes. Briefly, hiPSCs were seeded on Matrigel-coated plates (Corning) at a density of 1.5 × 10⁵ cells/cm² in Essential 8 (E8) medium (Gibco). After 48 h, differentiation was induced using RPMI medium (Biowest) supplemented with B27 minus insulin (Gibco) and 9 μM CHIR99021 (Sigma-Aldrich) for 24 h, followed by 48 h in RPMI B27⁻. The medium was then replaced with a 1:1 mixture of conditioned and fresh RPMI B27⁻ containing 5 μM IWP2 (Labclinics) for 48 h, and subsequently with fresh RPMI B27⁻ for an additional 48 h. Cultures were then maintained in RPMI supplemented with B27 plus insulin (RPMI B27⁺) for 72 h. Cardiomyocytes were purified by 48 h incubation in glucose-free RPMI B27⁺ medium (Gibco) and passaged using TrypLE (Gibco). Cells were reseeded on Matrigel-coated plates in RPMI B27⁺ supplemented with 10 μM Y-27632 (Stem Cell Technologies) and 10% KnockOut serum (Gibco). After 24 h, medium was replaced with RPMI B27⁺ containing 2 μM CHIR99021 (expansion medium), refreshed every 48–72 h. Cells were expanded for up to four passages before use. To monitor hiPSC-CM purity, cells were analyzed by flow cytometry after each passage using cardiac Troponin T (cTnT) as a marker. Cells were fixed with 2% paraformaldehyde for 15 min at 4 °C, permeabilized and blocked with 0.1% saponin (MilliporeSigma) and 10% donkey serum (Sigma-Aldrich), and stained with BV421-conjugated anti-cTnT antibody (clone 13-11, BD Biosciences, 1:200). Samples were washed with PBS and analyzed by flow cytometry. Differentiation batches with <80% cTnT⁺ cells were excluded from experiments. Selection of single-chain variable fragment (scFv) and CAR construct design The mutated calreticulin-specific single-chain variable fragments (scFvs) were derived from different previously described antibodies: mCALR-CAR0, from the 8B2-H6 antibody (WO 2016/087514); mCALR-CAR1, from the B3 antibody (WO 2020/175689 A1); mCALR-CAR2, from antibody clone 4; mCALR-CAR3, from antibody clone 74; and mCALR-CAR4, from antibody clone 132 (all from WO 2023/107994, Supplementary Figure 16). The construct included a human CD8 hinge, a human CD8 transmembrane domain, a human 4-1BB endodomain, and the ζ signaling endodomain of the T cell receptor complex (CD3ζ). Additionally, a T2A-enhanced green fluorescent protein (ZsGreen) sequence was incorporated. The construct was synthesized commercially (GenScript) and cloned into a pCCL1 lentiviral backbone. An identical lentiviral vector expressing ZsGreen alone was used as a control (mock) where indicated., Lentiviral Particle Production and T-cell Transduction, Activation, and Expansion To produce viral supernatant, HEK293T cells were co-transfected with the CAR-encoding pCCL1 lentiviral plasmid, the RRE and Rev plasmids, and a plasmid containing the sequence for the VSV-G envelope (kindly provided by Pablo Menéndez’s laboratory). Plasmid transfection was carried out using PEI for 5 hours. Viral supernatants were collected at 48 and 72 hours posttransfection and ultracentrifuged (26000 rpm, 2.5 hours at 4°C, Sorvall WX+, Thermo Scientific). The concentrated supernatant was then titrated in HEK293T cells to determine viral titer for consistent infections. PBMCs were isolated from blood samples of HDs or MPN patients using Ficoll Paque Plus (Merk) gradient centrifugation (PI24/276). Primary human T cells were cultured in RPMI 1640 supplemented with 10% heat-inactivated FBS and 100 U/mL penicillin/streptomycin at 37°C in a 5% CO₂ incubator. T cells were activated using plate-bound anti-CD3 (OKT3) and anti-CD28 (BD Biosciences). After 24 hours, human IL-7 and IL-15 (Miltenyi Biotec) were added at a final concentration of 10 ng/mL. The next day, T cells were seeded into a new plate and transduced with lentiviral CAR vectors at a multiplicity of infection of 30. Proper CAR cell generation was confirmed by eGFP expression and CAR surface expression through extracellular labeling of the scFv using a Biotin-AffiniPure F(ab’)2 Fragment Goat Anti-Mouse IgG (H+L) or Biotin- AffiniPure F(ab’)₂ Fragment Goat Anti-Human IgG (H+L) (Jackson ImmunoResearch Laboratories) followed by incubation with Streptavidin-PE (Miltenyi Biotech) and analyzed by flow cytometry. In Vitro Cytotoxicity Assays and Cytokine Release Determination T cells expressing different CAR-T constructs were co-cultured with target cells at the indicated E:T ratios for 24 to 48 hours to evaluate cytotoxicity. Wells containing only target cells served as controls for normalization. Comparisons were made between mCALR⁺ target cells co-cultured with CAR-transduced T cells and appropriate reference groups, depending on the experimental setup: against mCALR⁻ target cells co-cultured with CAR-T cells or against mCALR+ cells cocultured with non-transduced T cells. Experiments were conducted with a normalized CAR expression level of 35% to compare the different CAR constructs. Cytotoxicity was assessed using both Incucyte-based live-cell imaging and a luciferase-based viability assay. For the Incucyte assays, co-cultures were imaged every 6 hours for up to 48 hours using the Incucyte Live-Cell Analysis System (Sartorius). Red fluorescence intensity was used to quantify target cell survival. Viability was calculated as the percentage of the red fluorescence area relative to control wells at each time point, using the following formula: Viability (%) = (Orange fluorescence area of test wells at t / t₀) / (Orange fluorescence area of control wells at t / t₀) × 100, with analysis performed using Incucyte Analysis Software. In the luciferase-based assay, luciferase activity was measured at 24 and 48 hours post co-culture using D-luciferin (BioVision), and luminescence was recorded with a BioTek Microplate Reader (Agilent). Cell viability was calculated based on the percentage of luminescence relative to control wells using the formula: Viability (%) = (Luminescence of test wells / Luminescence of control wells) × 100. The production of the proinflammatory cytokine interferon-γ (IFN-γ) was measured in cytotoxicity assay supernatants using an enzyme-linked immunosorbent assay (ELISA) from BD Biosciences. Additionally, the multiplex immunoassay quantified TNFα, IL6, IL10, CXCL10, MIP1A/B, IL2, IL13, and IL5 using a customized multiplex immunoassay from R&D Systems, following the manufacturer’s instructions. Flow cytometry Samples were acquired using a MACSQuant® 10 Analyzer Flow Cytometer, a MACSQuant® VYB Flow Cytometer (Miltenyi Biotec), or a BD FACSDiscover™ S8 Cell Sorter (BD Biosciences). For surface staining, cells were resuspended in PBS containing 5% FCS and incubated with the appropriate antibody cocktails and Fcγ Block Reagent (BD Biosciences) for 30 minutes at 4 ºC in the dark. Cells were then washed twice with PBS plus 5% FCS. For intracellular staining, following surface staining, cells were fixed and permeabilized using the FoxP3 Transcription Factor Buffer Kit (Miltenyi Biotec) according to the manufacturer’s protocol, and then incubated with intracellular antibodies for 30 minutes at 4 ºC in the dark. The cell surface expression of mutated calreticulin was detected using an anti-human mutated calreticulin antibody (CAL2 clone, Dianova), followed by an Alexa Fluor-633 secondary antibody (ThermoFisher). All the antibodies used are presented in Supplementary Table 4. The immunophenotyping of healthy donor PBMCs, patient PBMCs, and CD34+ progenitor cells was analyzed using Kaluza Software (Beckman Coulter). The hCD3 phenotyping samples from mice were analyzed using FlowJo™ Software. First, dimensionality reduction was performed using t-SNE. Subsequently, the FlowSOM algorithm was applied to the t-SNE data to conduct unsupervised clustering, enabling the identification of distinct cellular subsets based on phenotypic profiles. Western blot analysis Whole-cell extracts were prepared by lysing cells for 15 min on ice in RIPA lysis buffer (Sigma-Aldrich) supplemented with protease and phosphatase cocktail inhibitors (Roche). Protein concentration in cell lysates was quantified by Bradford (BioRad) using a BioTek Microplate Reader. Cell culture supernatants were centrifuged using a 50 kDa Amicon filter (Sigma-Aldrich) to concentrate mCALR. Whole-cell lysates and cell culture supernatants were separated through SDS-polyacrylamide gels and transferred to a nitrocellulose membrane (BioRad). Membranes were blocked with 5% milk powder in 0.1% Tween 20 (Sigma-Aldrich) in PBS (PBS-T) for 1 h at RT, followed by incubation with primary antibodies diluted in 2.5% milk PBS-T. Western Blotting Luminol Reagent (Thermoscience) was used to detect protein expression with light-sensitive films (Phenix Research). The following antibodies were used: Anti-mCALR (1:500, Dianova), anti-Bcl-2 (1:250, SantaCruz), anti-Bcl-xL (1:1000, CellSignaling) and anti-GAPDH (1:1000, SantaCruz). Xenograft in vivo model. Nonobese diabetic B-NDG mice (female, 5-week-old, Inotiv) were housed in sterile facilities for immunosuppressed animals at the Center for Biomedical Research of Aragon (CIBA). Animal protocols were approved by the University of Zaragoza’s Advisory Ethics Commission for Animal Research (code PI48/23). Mice were IV transplanted with 3×105 Luc/ZsGreen–expressing HEL mCALR+ cells or MARIMO cell line. Two days later, 5×106 CART3-mCALR for eGFP-transfected (MOCK) T cells were i.v. infused. Tumour burden was followed by bioluminescence using the IVIS system (IVIS Lumina XRMS In Vivo Imaging System). To measure tumor burden, mice were injected intraperitoneally with 150 mg/kg of D-luciferin, and luminescence was monitored at the indicated time points. Signal intensity was quantified as total flux (photons/sec/cm²/sr) using Living Image software (PerkinElmer). Mice were regularly examined for weight loss, signs of stress, or the development of hind limb paralysis and euthanized according to preset criteria. Peripheral blood was collected weekly from the submandibular vein and samples were stained for flow cytometry to assess tumor burden (hCD33⁺GFP⁺/total cells) and the human T cells (hCD45⁺hCD3⁺/total cells) and CART3-mCALR cells (hCD45⁺ hCD3⁺ GFP⁺/total cells) persistence with total cells defined as the sum of hCD45⁺ and mCD45⁺ cells in each sample (Antibody information in supplementary Table 4). Red blood cells were lysed with ACK buffer (ThermoFisher). Similarly, spleen, blood, and bone marrow at euthanization were analysed by flow cytometry. Additionally, ex vivo bioluminescence imaging was performed on harvested mouse organs using the IVIS system. For survival analysis, animals were monitored daily and euthanized upon reaching predefined humane endpoints. CAR-treated mice were sacrificed seven days after the death of the last control animal, corresponding to approximately 25% longer survival, as established in the experimental design. At the time of euthanasia, spleen, liver, bone marrow, and tumor tissues were collected for the analysis of T-cell migration and tumor burden. In cases where a mouse in the CAR-treated group died before the planned endpoint, the euthanasia of the remaining mice was postponed by an equivalent period (25% of the control group survival) counted from the day of that death. RNA sequencing and data analysis. For bulk RNA-Seq analysis, patient-derived primary CD34+ cells were enriched, as previously indicated. Total RNA was extracted using TRIzol™ Reagent (Invitrogen). Briefly, samples were lysed in TRIzol, mixed with chloroform (PanReac), and centrifuged to separate phases. The aqueous phase was collected, RNA was precipitated with isopropanol (PanReac), washed with 75% ethanol, and resuspended in RNase-free water (Merk). Additional patient data is given in Supplemental Table 3. Total RNA sequencing was performed by CeGaT (Germany) using the WTS Classic service. Briefly, rRNA was depleted, total RNA was analyzed, libraries were prepared, and sequencing was conducted using Illumina sequencing platforms (Read length: 2 x 100 bp, Output: 6 M clusters (10 Gb) per sample). FASTQ files were preprocessed to filter by read length and sequence quality (minimum length of 50 bp) and to exclude reads with excessive ambiguous bases (>15% Ns). This filtering was performed using the Prinseq tool. Control samples correspond to SRR30220813–SRR30220816 from the SRP526030 study. Reads were mapped to the human reference genome (GRCh38.p14 primary assembly) using HISAT2 v2.2.1. Alignment files in SAM format were converted to BAM format using SAMtools v1.21 . Transcript assembly was performed with StringTie v2.2.2, using the GRCh38.113 GTF annotation file from Ensembl. Differential expression analysis was carried out using DESeq2, edgeR, and voom. For single-cell RNA sequencing, cryopreserved cell suspensions were thawed, washed, and resuspended in RPMI 1640 medium supplemented with 10% fetal calf serum (FCS), following the guidelines from 10x Genomics (CG000447—Handbook Cell Thawing Protocols for Singlecell Assays, Rev. B). Cell viability and counts were assessed using acridine range/propidium iodide staining and an automated cell counter (Cellaca MX, Cenibra GmbH, Germany). Singlecell suspensions were then loaded onto a Chromium GEM-X Single Cell 3′ chip (10xGenomics), targeting 20,000 cells per sample, and processed using the Chromium Controller with the GEM-X Universal 3′ Gene Expression v4 kit (10x Genomics) according to the manufacturer’s instructions. The resulting libraries were sequenced on a NovaSeq X Plus (Illumina) using a 25B flow cell, achieving an average depth of approximately 40,000 reads per cell. Sequencing data were demultiplexed and processed with Cell Ranger (v9.0.1) using the GRCh38-2024-A reference genome. 15,782 cells were recovered for sample 1 (MARIMO cell line used for infusion) and 13,051 cells for sample 2 (pooled spleen residual tumor cells), with median gene counts of 3,248 and 2,042 per cell, respectively. Filtered feature-barcode matrices were subsequently analyzed in Seurat (v5.1.0). Cells were retained if they expressed between 600 and 6,000 genes per cell and had less than 20% mitochondrial gene content. Batch correction was performed using SCTransform. After quality control and filtering, the final high-quality libraries contained 13,861 (sample 1) and 9,661 (sample 2) cells, each expressing more than 2,000 genes per cell. Principal component analysis (PCA) and Uniform Manifold Approximation and Projection (UMAP) were computed from the top 30 principal components. Clustering was performed using the Louvain algorithm at a resolution of 0.5, and transcriptional clusters were identified using the FindAllMarkers function in Seurat. Cluster annotation was based on the top-ranked marker genes, and gene module scores were computed using the AddModuleScore function. Comparisons between clusters of interest were conducted using the FindMarkers function in Seurat (Wilcoxon rank-sum tests with Bonferroni correction), with the parameters logfc.threshold = 0, min.pct = 0, and min.diff.pct = −Inf to retain all detected features. Filtered differential expression results were subsequently refined using in-house scripts, applying a minimum adjusted p-value of 0.05 and a minimum log₂ fold change of 0.5., Supplementary Table 1. Kinetic binding parameters and functional activity of anti-mCALR antibody clones, as reported in the respective patents; Supplementary Table 2. Clinical characteristics of patients included in cytotoxicity assays; Supplementary Table 3. Clinical characteristics of patients included in the RNA-seq analysis; Supplementary Table 4. List of antibodies.--, Supplementary Figure 1. Surface expression of CART3-mCALR by human scFv labelling detected by flow cytometry in primary T cells; Supplementary Figure 2. Proliferation of wildtype (WT) and mutated Calreticulin (CALR mut) K562, HEL and THP-1 cell lines using IncuCyte live-cell imaging by confluency analysis; Supplementary Figure 3. CART3-mCALR induces higher cytokine secretion levels compared to other constructs, as measured by Luminex of supernatant of a cytotoxicity at 4:1 E:T ratio against K562 cell line; Supplementary Figure 4. CAR-T cell cytotoxicity against cell lines expressing distinct mCALR variants; Supplementary Figure 5. Real-time cytotoxicity assay monitored by IncuCyte confluence analysis in mCALR-negative cell lines and mCALR-positive controls; Supplementary Figure 6. Cytotoxicity of anti-mCALR CAR-T cells against primary cardiomyocytes, cardiac fibroblasts, and PBMCs; Supplementary Figure 7; Supplementary Figure 8; Supplementary Figure 9; Supplementary Figure 10; Supplementary Figure 11; Supplementary Figure 12; Supplementary Figure 13; Supplementary Figure 14; Supplementary Figure 15; Supplementary Figure 16. Sequences of CARs constructs indicating the source patent for each sequence., This work was funded by the Instituto de Salud Carlos III (ISCIII) through the Strategic Action in Health (AES), 2025 call, Health R&D Projects – Strategic Lines of Health Research (project/grant number: PI25/00236). AR-L is funded by a Ramón y Cajal contract (RYC2022-036627-I), financed by MCIN/AEI/10.13039/501100011033 and the European Social Fund (ESF) “Investing in your future” and ASPANOA. Grant PROY_B61_24 "proyectos de Investigación, desarrollo e innovación (I+D+i) en líneas prioritarias y de carácter multidisciplinar" funded by Gobierno de Aragón to AR-L and DSM. The Instituto de Salud Carlos III (ISCIII) through the Spanish Network of Advanced Therapies (RICORS/TERAV+), project RD24/0014/0015, and co-funded by the European Union (EU) to AR-L, JP, DSM and EMG. Work in the JP laboratory is funded by CIBERINFEC-ConsorcioCentro de Investigación Biomédica en Red- (CB21/13/00087), CERTERA andTERAV+ from Institutode Salud Carlos III, FEDER (Fondo Europeo de Desarrollo Regional),Gobierno deAragón (Group B29_23R, and LMP139_21), Grants PID2020-113963RBI00 andPID2024-157582OB-I00from MCIN/ AEI/10.13039/501100011033 and private social initiatives(FARO, AECC, Dona Médula, ASPANOA, and Carrera de la Mujer de Monzón No 101018587). Grant PID2022-136554OA-I00 funded by MICIU/AEI 10.13039/501100011033 and the European Regional Development Fund (ERDF)/EU to DSM. Predoctoral Grant for Ibero-Americas in Doctoral studies University of Zaragoza-Santander University (ACP), and Predoctoral Grant from AECC (CP). This work is part of a project that has received funding from the European Research Council (ICoMICS grant agreement No 101018587).--, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Replication data for Machine Learning-Driven Sensor Array for Predictive Detection of Glutathione

  • Georgina Faura
  • Marwa Ben Amar
  • Goran Petrovski
  • Xavier Muñoz-Berbel
  • Lars Eide
Raw cyclic voltammetry data acquired with a Multipalm-Sens system for the paper “Machine Learning-Driven Sensor Array for Predictive Detection of Glutathione”. The repository also includes Python scripts for model training and performance evaluation used for the quantification of GSH and GSSG in cell medium, European Union’s Horizon 2020 Research and Innovation Programme under the Marie Skłodowska-Curie Actions Grant agreement no. 801133, the Norway Grants and Technology Agency of the Czech Republic (KAPPA Programme, Project Number TO01000107) European Regional Development Fund (no. CZ.02.01.01/00/22_008/0004562 Project “Excellence in Regenerative Medicine”), the UiO Growth House seed funding (Norway) The foundation at Oslo University Hospital (Fondsstiftelsen ved Oslo universitetssykehus, Norway). The Spanish Ministry of Science and Innovation and the State Research Agency (MICINN–AEI) under projects PID2021‑127653NB‑C21 and PID2024‑157813OB‑C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Tetradecanuclear {Ni9Ln5} clusters featuring encapsulated {Ln5} bipyramids: Modular 3d-4f architectures with broad-range magnetocaloric response

  • Tziotzi, Thomais G.
  • Asmargiannaki, Evangelia G.
  • Thamm, Ben
  • Dalgarno, Scott J.
  • Charkiolakis, Emmanouil K.
  • Ubach I Cervera, Marc
  • Gracia, David
  • Evangelisti, Marco
  • Milios, Constantinos J.
Magnetisation data were collected on a QD-MPMS3 SQUID magnetometer equipped with a 7 T magnet. Diamagnetic corrections were applied using Pascal's constants., Heat capacity measurements were carried out on a QD-PPMS equipped with a 9 T magnet and a 3He cryostat, using a thin pressed pellet (ca. 1 mg) of polycrystalline samples of 1 and 3, thermalized by ca. 0.2 mg of Apiezon N grease, whose contribution was subtracted using a phenomenological expression., Crystallographic data for compounds 1 - 3 have been deposited at the CCDC under numbers 2533099 - 2533101, respectively, and can be obtained from https://www.ccdc.cam.ac.uk/structures/., The solvothermal reaction between Ni(HCOO)2.2H2O, 2-aminoisobutyric acid (aibH), Ln(OAc)3·6H2O (Ln = Gd, Y, Dy) and NEt3 in MeOH/MeCN affords the tetradecanuclear [Ni9Ln5(OH)9(aib)12(OAc)x(ΗCOO)y].12MeCN complexes (Ln= Gd, x=6, y=6, 1.12MeCN; Ln= Y, x=6, y=6, 2.12MeCN; Ln= Dy, x=3, y=9, 3.12MeCN) in good yields. All three clusters are isostructural, featuring a trigonal bipyramidal {Ln5} core encapsulated within a triply edge-capped {[NiII3]NiII6} trigonal prism. Magnetic measurements reveal dominant ferromagnetic intermolecular interactions in the Gd and Dy analogues, whereas the Y derivative exhibits weak antiferromagnetic behavior. Magnetothermal and heat-capacity measurements for 1.12MeCN indicate a significant magnetocaloric effect, reaching −∆Sm= 29.0 J kg-1K-1 for full demagnetization from B = 7 T at T = 3.0 K, while sustaining large −ΔSm(T,ΔB) and ΔTad(T,ΔB) responses across an unusually broad temperature range., This work has received support from EU (MSCA-DN MolCal, 101119865), MICIU/AEI/10.13039/501100011033/ and ERDF/EU (PID2024-159457OB-C21, CEX2023-001286-S). CJM and TGT would like to thank the National Recovery and Resilience Plan Greece 2.0 (Award Number TAEDR-0535821), funded by the European Union − NextGenerationEU., CEX2023-001286-S, Figure 5: T1, T2, T3 = temperature for compounds 1, 2 and 3, respectively. x1, x2, x3 = magnetic susceptibility for compounds 1, 2 and 3, respectively. T2fit, x2fit = simulated temperature and susceptibility for compound 2. B = applied magnetic field M2K, M3K = molar magnetization at 2K and 3K, respectively. Bfit, M2Kfit = simulated magnetic field and magnetization at 2K Figure 6: T0, T1T = temperature for zero applied magnetic field and 1T, respectively. C0, C1T = molar heat capacity for zero applied magnetic field and 1T, respectively. T0fit, C0fit = simulated temperature and heat capacity for zero applied magnetic field. Figure 7: TDSmC = temperature for magnetic entropy change (DSm) data calculated from heat capacity (C). DSmC1T = DSm calculated from C for 1T applied magnetic field. TDSmM = temperature for DSm data calculated from magnetization (M). DSmC1T = DSm calculated from M for 1T applied magnetic field. TDTad = temperature for adiabatic temperature change (DTad) data. DTad1T = DTad for 1T applied magnetic field., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Algae additives for sustainable materials_Dataset

  • Hernández-García, Eva
  • Fabra, María José
  • Reyes, Alcira
  • López-Rubio, Amparo
- Scanning Electron Microscopy of the cross-section of the films (.tif archives). --Crystallinity, mechanical properties, contact angle, solubility, water uptake, WVP and OP of the films based on starch and marine biomass (samplesdata.xlsx). -- Parameters and visual appearance of the films before, during and after the disintegration process (Ensayo-desintegración-ISO20200.pdf).-- DTG first derivative curves of the films (TGA.xlsx).-- XRD patterns of the films based on starch and marine biomass (XRD.xlsx), The valorisation of marine biomass is increasingly considered a potential sustainable strategy for developing biodegradable packaging materials. In this work, the incorporation of Gelidium corneum holocellulosic residue and Rugulopteryx okamurae algae into starch-based films was explored to gain insight into their possible effects on film properties. Both marine biomasses appeared to contribute to improved moisture resistance, showing reductions in water intake, permeability and solubility, although the extent of these effects varied. Films containing Gelidium corneum generally showed more notable enhancements, including increased rigidity, with tensile strength at break values reaching up to roughly twice those of pure starch films. In contrast, the incorporation of Rugulopteryx okamurae tended to produce more heterogeneous films with lower mechanically performance, without clear improvements in tensile strength and in some reductions at higher algae concentrations. These differences may be related to variations in cellulose content and the degree of compatibility with the starch matrix. Thermal and XRD analyses indicated that starch retrogradation occurred during storage, leading to increases in crystallinity, an effect that appeared particularly marked in films with Rugulopteryx okamurae (from 13.4% to 58.3%). Biodegradation tests showed that only films containing Gelidium corneum films met the ISO 20200 standard of over 90% degradation within 90 days under composting conditions. Overall, Gelidium corneum residue and Rugulopteryx okamurae algae show potential as additives for producing starch-based films, although their influence on mechanical, thermal and water-related properties differs considerably., The authors acknowledge the Juan de la Cierva Formación post-doctoral contract awarded to Eva Hernández-García by the Spanish Ministry of Science and Innovation (JDC2023-05I858-I) and grant PID2022-138328OB-C21 and PCI2024-153409 funded by MCIN/AEI/ 10.13039/501100011033 and by “ERDF A way of making Europe”. This work was supported by EVOLVEPACK project, a PRIMA-Horizon 2020. The Accreditation as Center of Excellence Severo Ochoa CEX2021-001189-S funded by MCIN/AEI / 10.13039/501100011033 is also fully acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data and R code of the study: Environmental factors affect the communities of avian Plasmodium in two species of Culex mosquitoes

  • Martín-López, Ana Irina
  • Ruiz-López, María José
  • Martínez de la Puente, Josué
  • Magallanes, Sergio
  • Taheri, Shirin
  • Ruiz, Santiago
  • Figuerola, Jordi
Projects PLEC2021-007968 (NEXTHREAT), PGC2018-095704-B-I00, and PID2021-123761OB-I00 and PID2024-159000OB-I00 funded by Ministerio de Ciencia e Innovacion [MCIN/AEI/10.13039/5011000110333] and European Union NextGenerationEU/ PRTR funds., Martin-Lopez et al-Data.csv; Martin-Lopez et al-Environmental factors affect the communities of avian Plasmodium in two species of Culex mosquitoes.r, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Temperature-driven elastocaloric enhancement in liquid crystal elastomers

  • Rojo, Kenneth Roy
  • Cosculluela, Carlos
  • Téllez, Pedro
  • Sánchez-Somolinos, Carlos
  • Evangelisti, Marco
[Description of methods used for collection/generation of data]: Differential scanning calorimetry measurements were performed using DSC Q1000 (TA Instruments) on both the LCE and its precursor. The sample pan utilized for both measurements was the hermetically sealed Tzero aluminum pan (TA Instruments). The heating rate was consistently maintained at 5 °C/min. The temperature modulation parameters were set to a period of 50 seconds and an amplitude of ± 0.663 °C. Before each heating procedure, a 15-minute isothermal interval was applied to allow the equipment to stabilize and reach the designated modulation parameters. Three heat cycles were programmed per measurement with each heat-cool cycle followed by a Newtonian cooling quench. The initial and secondary heat-cool cycles effectively erased the thermal history of the samples. The values presented herein were gathered from the third and final heating cycle. Broadband Dielectric Spectroscopy (BDS) measurement of the prepared LCE material was taken using the Alpha-Beta Impedance Analyzer (Novocontrol). The measurement frequency range was 10^[-1] to 10^[7] Hz. The sample was positioned between 20-mm diameter gold-plated electrodes and subsequently loaded into the Active Sample Cell (Novocontrol) sample stage. The sample was proportioned with a larger diameter than the electrodes to ensure an overhang and prevent short-circuit. The root mean square of the applied AC voltage was 1.0 Vrms. To investigate the polymer dynamics, dielectric measurements were conducted in isothermal mode with a temperature step value of 5 °C/min from -120 to 100 °C/min. The temperature control of each isothermal measurement was maintained by the Quatro Cryosystem (Novocontrol), exhibiting a temperature stability better than ± 0.28$ K. Dynamic mechanical analysis (DMA) measurements were performed using DMA Q800 (TA Instruments) in tension mode. LCE samples were portioned into 25~mm long strips with a width of 2-6 mm. The single-frequency measurement was conducted at a frequency of 1~Hz. The oscillation amplitude was set to 0.37 strain. The sample was initially equilibrated at -100 °C for 5 minutes and then heated up to 70 °C at a heating rate of 2 °C/min. Tensile equipment: A custom-built tensile setup was developed to perform the deformation cycles required for direct measurements of the eC effect. A belt-drive motor provided strain load with an accuracy of ± 0.1 mm. The loading strain rate was set such that the loading strain was reached within 0.2 s, while unloading was performed at the maximum attainable rate of the motor, corresponding to -1200 mm/s. The sample stage was enclosed within a PID-controlled heating chamber to enable precise temperature regulation. The tensile apparatus was housed inside a polystyrene enclosure for temperature regulation, and active cooling was achieved by introducing a controlled nitrogen gas flow into the enclosure. Temperature measurements: Infrared thermography was employed to conduct contact-less temperature measurements. A FLIR A655sc (Teledyne FLIR) with 25°C field of view is pointed towards the thermal window of the polystyrene case. To minimize IR reflections and background noise, the upper surface of the polystyrene enclosure was uniformly covered with black electrical tape. All IR videos were captured at a frame rate of 50 frames per second. The sample temperature was extracted as the mean value of the central third of the visible LCE surface, both in the undeformed and elongated states., [Methods for processing the data]: For elastocaloric measurements, the initial temperature was defined as the time‑equilibrated temperature of the undeformed sample region immediately prior to loading. Following deformation, temperature values were obtained from the corresponding central region of the elongated sample, and after unloading from the central region of the recovered geometry. In cases where partial out‑of‑focus regions arose due to sample bending or delayed geometric recovery, temperature analysis was restricted to the central in‑focus area. The adiabatic temperature change was determined relative to the initial equilibrated temperature preceding each loading or unloading event. For BDS measurements, the characteristic relaxation time of every molecular motion was simulated using either Havriliak-Negami (for cooperative relaxations) or Cole-Cole equation (for local relaxations)., Liquid crystal elastomers exhibit promising elastocaloric behavior, yet all direct measurements reported to date have been restricted to room temperature. Here, we perform variable-temperature direct elastocaloric measurements on an isotropic liquid crystal elastomer using a custom tensile setup coupled with infrared thermography, enabling fast mechanical cycling across a broad temperature range. As temperature decreases from ambient conditions, the elastocaloric response increases markedly, peaking near –3.5 ◦C with adiabatic temperature changes of ∆T+ = 3.94 ◦C and ∆T− = −4.33 ◦C at 60 % strain. By correlating these measurements with a detailed investigation of polymer dynamics, we identify a finite temperature window in which the elastocaloric response is maximized. This optimum arises from kinetic timescale matching between molecular relaxations and the mechanical loading-unloading cycle. These results establish kinetic control as a key factor governing the temperature dependence of elastocaloric performance in liquid crystal elastomers., This work was funded by EU (MSCA-DN MolCal, 101119865), MICIU/AEI/10.13039/501100011033/ and ERDF/EU (PID2024-159457OB-C21, CEX2023-001286-S), Gobierno de Aragón (PROY_E28_24), ERDF/EU and Fondo Social Europeo (DGA E15_20R), CIBER - Consorcio Centro de Investigación Biomédica en Red (CB06/01/00263), Instituto de Salud Carlos III, Ministerio de Ciencia e Innovación., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Database of the blue carbon inventory in Spain and Portugal. Organic carbon biomass and soil stocks and sequestration rates to the soil.

  • Piñeiro Juncal, Nerea
  • Serrano, Oscar
  • Santos, Carmen B. de los
  • Marbà, Núria
  • Díaz-Almela, Elena
  • Tuya, Fernando
  • Mazarrasa, Inés
  • Garmendia, Joxe Mikel
  • Otero, Xosé Luis
  • Inostroza, Karina
  • Pagès, Jordi F.
  • Méndez Martínez, Gonzalo
  • Fernández, E.
  • Sousa, Ana I.
  • Camacho, A.
  • Ballesteros, Enric
  • Barañano, Carlota
  • Belshe, E. Fay
  • Bernabeu, Irene
  • Brun, Fernando G.
  • Camacho-Santamaría, Alba
  • Delgado Huertas, Antonio
  • Dahl, Martin
  • Duarte, Carlos M.
  • Espino, Fernando
  • Franco, Javier
  • Freitas, Maria de Conceiçao
  • García-Orellana, Jordi
  • Garrigos, Bernat
  • Gomis, Enric
  • Haroun, Ricardo
  • Hernández, Ignacio
  • Juanes, José A.
  • Leiva-Dueñas, Carmen
  • Lavery, Paul S.
  • Lilebo, Ana
  • Lopes, Vera
  • Majténti-Hill, Claudia
  • Marco-Méndez, Candela
  • Martins, Marcio
  • Monnier, Briac
  • Morant, Daniel
  • Montero, Natalia
  • Neto, Joao M.
  • Ondiviela, Bárbara
  • Peralta González, Gloria
  • Picazo Mozo, Antonio
  • Reithmaier, Gloria Maria Susanne
  • Rochera, Carlos
  • Román, Marta
  • Santos, Isaac
  • Santos, Rui
  • Serrano, Eduard
  • Soler Roig, Montserrat
  • Yau Yau, Yu
  • Weitzmann, Boris
  • Zribi, Imen
  • Mateo, Miguel Ángel
This database is a compilation of published and unpublished data used to estimate (i) the organic carbon biomass stocks, (ii) the soil organic carbon stock, and (iii) the rates of organic carbon sequestration to the soil associated to Spanish and Portuguese seagrass meadows and salt marshes., This work is a contribution of the groups Group of Benthic Ecology (SGR-00405), Group of Aquatic Macrophyte Ecology (GAME-CSIC-632711), the Spanish Group of Experts in Blue Carbon Ecosystems (G3ECA - RED2024-153711-E), and the CSIC Interdisciplinary Thematic Platform OCEANS+, funded by the European Union-Next Generation EU Agreement between MITECO, CSIC, AZTI, SOCIB, and the universities of Vigo and Cadiz, to promote research and generate scientific knowledge in the field of marine sustainability. This work has received financial support from the Xunta de Galicia (Centro de Investigación de Galicia accreditation 2019-2022), the European Union (European Regional Development Fund - ERDF) and the FCT-Foundation for Science and Technology for the financial support to CESAM (UIDB/50017/2020 + UIDP/50017/2020 + LA/P/0094/2020). NPJ was supported by a Juan de la Cierva fellowship (JDC2022-048342-I, funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR”). CBdlS received Portuguese national funds from FCT - Foundation for Science and Technology through projects UIDB/04326/2020 (DOI:10.54499/UIDB/04326/2020) and LA/P/0101/2020 (DOI:10.54499/LA/P/0101/2020) and 2020.03825.CEECIND (DOI:10.54499/2020.03825.CEECIND/CP1597/CT0005). MM was funded through an FCT PhD grant (DOI:10.54499/2020.06996.BD). JFP acknowledges funding by the project PID2023-151732OA-I00 and contract RYC2022-036196-I, awarded by MCIN/AEI/10.13039/501100011033 and the FSE+. MR was supported by a post-doc fellowship from the Xunta de Galicia (ED481A-2020/199). A.C-S was supported by a FPU Predoctoral Scholarship by the Spanish Ministry of Science Innovation and Universities under Grant FPU21/04314. This work was supported by projects LIFE BLUE NATURA (LIFE14CCM/ES/000957), funded by European Union; CLIMAWET-CONS (PID2019-104742RB-I00) and WETCARVER (PDC2022–133205–I00), funded by MICINN and/or AEI, of the Spanish Government, supported with FEDER–EU and MRR–EU Funds, respectively; project SEAFRONT (TED2021-132132B-C22, Spanish Ministry of Science and Innovation) and the framework of the activities of the Spanish Government through the "Maria de Maeztu Centre of Excellence" accreditation to IMEDEA (CSIC-UIB) (CEX2021-001198). We acknowledge the support of the Spanish MICIU/AEI /10.13039/501100011033 and the European Union NextGenerationEU/ PRTR (TED2021-129973B-I00; Restoration beyond biodiversity: How to integrate estuarine ecosystem services into nature-based management (MarshA) to B.O); and the Portuguese Fundação para a Ciência e Tecnologia, FCT, I.P./MCTES through national funds (PIDDAC): UID/50019/2025 and LA/P/0068/2020 https://doi.org/10.54499/LA/P/0068/2020)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset of the paper Rice Straw Nanocrystalline Cellulose as a High-Value Reinforcement for Fungal biomass/Starch Biocomposites: Structural, Thermal, and Barrier Property Enhancement

  • Cabrera Villamizar, Laura A.
  • Pérez-Bassart, Zaida
  • López-Rubio, Amparo
  • Fabra, María José
Data sheet consisting of several tabs. Each tab contains data on the characterization of raw materials and developed materials. Each tab is labeled with the type of analysis performed. The analyses performed include: moisture content, lipids, proteins, chitin, alpha-glucans, thermogravimetric analysis, FTIR, XRD, and particle size analysis, among others., This study evaluates the potential of Agaricus bisporus hortensis fungal biomass as a sustainable alternative to petroleum‑based plastics. Biomass is a renewable, fast‑growing resource, rich in carbohydrates (≈50.23%) and proteins (≈29.57%), but its direct processing into materials is limited by its mechanical performance. To overcome this limitation, composite materials were developed by combining fungal biomass with starch and rice‑straw nanocrystalline cellulose (RSNC), providing an effective valorization route for agricultural residues. The incorporation of RSNC led to a marked improvement in the mechanical properties of the composites, with no significant changes in visual appearance or color. A strong stiffening effect was observed, as the Young’s modulus increased from 139.45 MPa in the control formulation to 1239.60 MPa at 10 wt% RSNC, reaching values comparable to conventional polypropylene. In addition, the presence of 5 wt% RSNC reduced water vapor permeability by 47% and increased the water contact angle, indicating enhanced moisture resistance. These improvements were attributed to strong physical interactions and hydrogen bonding between RSNC and the biopolymeric matrix. X‑ray diffraction analysis showed a significant increase in crystallinity at higher RSNC contents, suggesting the formation of a percolating nanocellulose network. The materials were produced using a solvent‑free process compatible with conventional thermoplastic equipment. Overall, this work demonstrates a scalable, sustainable approach to producing high‑performance fungal‑based composites suitable for packaging applications., This work was supported by the Spanish Ministry of Science and Innovation (MICIU) and the State Research Agency (AEI) under grants PID2022-138328OB-C21 and PID2023-146557OB-C22, co-funded by the European Regional Development Fund (ERDF): “A way of making Europe”. The EVOLVEPACK project (Innovative Sustainable Packaging to Safeguard Our Food and Our Planet) is part of the PRIMA programme (Partnership for Research and Innovation in the Mediterranean Area), funded by the European Union’s Horizon 2020 program and the national research funding agency (PCI2024-153409). L. Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana through aSantiago Grisolía fellowship (GRISOLIA/2021/050)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

TRACS: Textual Records of Affective Correspondence in Spanish

  • Sarymsakova, Albina
  • García-Fernández, Miguel
  • López Ushakov, Cristian David
  • Bravo Sánchez, Sergio
  • Abejón Peña, Teresa
  • Mostazo Fernández, Yara
  • Martínez Escobar, Javier
  • Caso-López, Magdalena
  • Farré Vidal, Judith
  • Martín-Rodilla, Patricia
[Description of methods used for collection/generation of data] The annotation methodology, original guidelines, consensus annotations and dataset structure are original contributions of the authors., [ES] El corpus TRACS constituye un subconjunto especializado concebido como recurso para la aplicación de técnicas de minería de emociones desde el procesamiento de lenguaje natural MOMENTUM CSIC (ref. MMT24–IEGPS–01). Se trata de fragmentos de correspondencia transatlántica femenina de los siglos XVI y XVII desarrollados en el marco del proyecto Fastos, archivo y cultura femenina en la América virreinal (PID2024–156258NB–I00), financiado por MICIU AEI/10.13039/501100011033 y FEDER–EU. El recurso reúne 40 cartas personales escritas y/o recibidas por mujeres vinculadas al espacio virreinal hispánico y contiene un total de 753 fragmentos textuales anotados emocionalmente por un equipo interdisciplinar de diez especialistas que figuran como coautores del recurso. El dataset ha sido construido a partir de varias fuentes primarias posteriormente editadas y contextualizadas por el proyecto FASTOS, incluyendo correspondencia recogida en El hilo que une: las relaciones epistolares en el Viejo y el Nuevo Mundo (siglos XVI–XVIII) (Sánchez Rubio & Testón Núñez, 1999), Two Hearts, One Soul (Owens, 1993), Cartas de Lysi (Calvo & Colombi, 2023) e Iberia negra (Berruezo-Sánchez, Gobante & Tweede, 2024). El corpus se orienta específicamente al estudio de la dimensión afectiva en fuentes históricas mediante técnicas de minería de emociones y lingüística computacional aplicadas a documentación epistolar de época moderna. Las anotaciones siguen un esquema de ocho categorías emocionales —ira, disgusto, miedo, alegría, tristeza, sorpresa, nostalgia y esperanza— definido para facilitar la evaluación y comparación de modelos de análisis emocional en contextos históricos. El recurso se integra además en la línea de investigación sobre minería de emociones desde fuentes históricas desarrollada en el proyecto del IEGPS-CSIC "Historia y emociones: Caracterización y evaluación de técnicas de lingüística computacional y modelos de lenguaje en minería de emociones desde fuentes históricas" (ref. MMT24–IEGPS–01)., [EN] The TRACS corpus constitutes a specialized subset conceived as a resource for the application of emotion mining techniques within natural language processing MOMENTUM CSIC (ref. MMT24–IEGPS–01). It consists of fragments of female transatlantic correspondence from the sixteenth and seventeenth centuries developed within the framework of the project "Fastos, archivo y cultura femenina en la América virreinal" (PID2024–156258NB–I00), funded by MICIU AEI/10.13039/501100011033 and FEDER–EU. The resource comprises 40 personal letters written and/or received by women connected to the Hispanic viceregal world and contains a total of 753 emotionally annotated textual fragments produced by an interdisciplinary team of ten specialists who are listed as co-authors of the resource. The dataset was built from several primary sources later edited and contextualized by the FASTOS project, including correspondence collected in *El hilo que une: las relaciones epistolares en el Viejo y el Nuevo Mundo (siglos XVI–XVIII)* (Sánchez Rubio & Testón Núñez, 1999), *Two Hearts, One Soul* (Owens, 1993), *Cartas de Lysi* (Calvo & Colombi, 2023), and *Iberia negra* (Berruezo-Sánchez, Gobante & Tweede, 2024). The corpus is specifically oriented toward the study of affective dimensions in historical sources through emotion mining and computational linguistics techniques applied to early modern epistolary documentation. The annotations follow a schema of eight emotional categories —*anger, disgust, fear, joy, sadness, surprise, nostalgia,* and *hope*— defined to facilitate the evaluation and comparison of emotion analysis models in historical contexts. The resource is also integrated into the research line on emotion mining from historical sources developed within the IEGPS-CSIC project "Historia y emociones: Caracterización y evaluación de técnicas de lingüística computacional y modelos de lenguaje en minería de emociones desde fuentes históricas" (ref. MMT24–IEGPS–01)., This dataset is part of research programm MOMENTUM CSIC (ref. MMT24–IEGPS–01) within the framework of the Generación D initiative, promoted by Red.es—an entity attached to the Ministry for Digital Transformation and the Civil Service—to attract and retain talent through scholarships and training contracts funded by the Recovery, Transformation and Resilience Plan, supported by the European Union’s Next Generation funds. This dataset is also part of the research project “Fastos, archivo y cultura femenina en la América virreinal” (PID2024–156258NB–I00), funded by MICIU AEI/10.13039/501100011033 and by FEDER–EU. It is also supported by funding from the Spanish National Research Council (CSIC), Special Intramural Project No. 2024ICT028 and Special Intramural Project No. 2024ICT028.https://www.archivocolonial.csic.es/hdlab/, TRACS_dataset_1.csv, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data and code for: "Labor Market Competition and the Assimilation of Immigrants"

  • Albert, Christoph
  • Glitz, Albrecht
  • Llull, Joan
This paper shows that the wage assimilation of immigrants is the result of the intricate interplay between individual skill accumulation and dynamic labor market equilibrium effects. When immigrants and natives are imperfect substitutes, rising immigrant inflows widen the wage gap between them. Using a production function framework in which workers supply both general and host-country-specific skills, we show that this labor market competition channel explains about one fifth of the large increase in the average immigrant-native wage gap across arrival cohorts in the United States since the 1960s. This figure increases to one third after also accounting for relative demand shifts due to technological change. The results further reveal substantial heterogeneity across different~groups~of~immigrants., European Research Council (CoG-101125422, StG-804989, StG-716388); Generalitat de Catalunya (2017-SGR-1765); Spanish Ministry of Science and Innovation (PID2023-147602OB-I00/MICIU/AEI/10.13039/501100011033, PID2020-114231RB-I00/MICIU/AEI/10.13039/501100011033, PGC2018-094364-B-I00, ECO2017-83668-R, RYC-2015-18806); Severo Ochoa Programme for Centres of Excellence in R&D (CEX2019-000915-S, CEX2024-001476-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Characterization and in vitro responsiveness of enzymatic biomarkers in marine pelagic copepods [Dataset]

  • Aguilera Dal Grande, Paula
  • Omedes Martínez, Sergi
  • Saiz, Enric
  • Solé, Montserrat
This dataset displays biomarkers and in vitro inhibitions values from the tested species, PID2023-150548NB-I00 and PID2024-160452OB-C22 funded by MICIU/AEI /10.13039/501100011033 and by FEDER, and also with funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S). PRE2022-102491 funded by MCIN/AEI/10.13039/501100011033 MICIU/AEI /10.13039/501100011033 and by FSE+, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Influence of the physical properties of electrolytes on the behavior of all-vanadium redox flow batteries (Dataset)

  • Montiel, Manuel
  • Ibáñez Casao, Álvaro
Experimental results (raw data) of the article "Influence of the physical properties of electrolytes on the behavior of all-vanadium redox flow batteries"., Ministerio de Ciencia, Innovación y Universidades PID2021-126001OB-C32; Gobierno de Aragón PROY_T53_24; Gobierno de Aragón T06_23R; Ministerio de Ciencia, Innovación y Universidades PID2024- 158394OB-C21, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Upcycling vegetable by-products through lactic acid fermentation into oligosaccharide-rich fractions [Dataset]

  • Calvete-Torre, Inés
  • López-Revenga, Paula
  • Vázquez, Xenia
  • Díaz-González, Ana Isabel
  • Sabater, Carlos
  • Moreno, F. Javier
  • Ruas-Madiedo, Patricia
  • Margolles Barros, Abelardo
  • Montilla, Antonia
  • Ruíz García, Lorena
File 1: Processed carbohydrate datasets (low molecular weight carbohydrates (LMWC), monomeric composition (MC), molecular weight (Mw) distribution used for tables and figures in the manuscript (Excel format)., File 1a_Raw_Data_Clavete-Torre: Data from Table 1 and of supplementary material for statistical analysis, File 1b_Raw_Data_Clavete-Torre: Data from the supplementary material without statistical analysis, File 2: Complementary processed data and statistical outputs. File generated by SPSS, Data_SupplementaryTable_S2, Data_SupplementaryTable_S5, Vegetable by-products represent an underutilized source of structurally complex polysaccharides, and their conversion into high-value functional ingredients remains largely unexplored. Lactic acid fermentation is a promising and sustainable approach for modifying the structure of plant carbohydrates and generating bioactive oligosaccharides., Herein, we combined culture-independent and culture-dependent approaches to link microbial community carbohydrate-active potential with polysaccharide restructuring during lactic acid bacteria (LAB)-guided vegetable fermentations. Controlled fermentations were performed using 17 plant-derived lactic acid bacteria strains and two agro-industrial side streams with contrasting polysaccharide compositions: brewer’s spent grain and artichoke residues. Fermentation induced substrate- and strain-specific shifts in carbohydrate composition, including the accumulation of lower molecular weight fractions, indicative of partial depolymerization of starch, xylan and pectin, recognised precursors of emergent prebiotic oligosaccharides. These results demonstrate the capacity of LAB-driven fermentation to modify plant cell wall polysaccharides into potentially functional carbohydrate fractions. However, the extent of these transformations could not be consistently explained by predicted carbohydrate-active enzyme repertoires alone, suggesting that genomic potential is insufficient to predict polysaccharide conversion in complex matrices. Therefore, it is necessary to characterize the carbohydrate fraction of i) unfermented substrates, ii) spontaneously fermented substrates, and iii) substrates fermented with strains selected for their genomic profile. For this characterization, the LMWC content and monomeric composition were determined by GC-FID, and the molecular weight distribution of the soluble compounds was determined by HPSEC-ELSD. This dataset compiles these data., Overall, LAB-driven fermentation emerges as a flexible yet context-dependent strategy to tailor plant-derived polysaccharides, and produce value-added oligosaccharides from vegetable by-products., This work has been funded by TED2021-131541B-I00 and JDC2022-049850-I, both funded by MICIU/AEI /10.13039/501100011033 European Union NextGenerationEU/ PRTR; by CSIC grant 202370E168; by PID2021-123862OB-I00; PID2022-141737OB-100 and by PID2024-158847OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Cashew apple bagasse ultralight cellulose cryogels characterization [DATASET]

  • Barroso, Tiago Linhares Cruz Tabosa
  • Núñez, Eugenia
  • Forster-Carneiro, Tânia
  • López-Rubio, Amparo
  • Fabra, María José
This dataset contains the raw data supporting the study of converting cashew apple bagasse into ultralight cellulose cryogels and assessing how defatting pre-treatment affects the structure–property relationship. The data include alkaline extraction results (cellulose content of 70–74%), structural analyses (FTIR and XRD with crystallinity indices of 46–48%), and thermal stability profiles (TGA). They also include physical property measurements such as extremely low densities (0.018–0.020 g cm-3), microstructural analyses (CLSM and SEM), mechanical stiffness, and fluid sorption capacities (water and up to 36 mL g-1 for oil). These data support the conclusion that cashew apple bagasse is a promising, sustainable resource for producing advanced porous biomaterials., National Council for Scientific and Technological Development (CNPq, Brazil) [grant number 302451/2021-8]. Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES, Brazil) [Finance Code 001] São Paulo Research Foundation (FAPESP, Brazil) [grant numbers 2023/02064-8, 2024/21147-4, 2024/10205-3, and 2018/14938-4]. Project PID2023-146557OB-C22 was funded by MICIU/AEI/10.13039/501100011033 European Regional Development Fund (ERDF) "A way of making Europe". The EVOLVEPACK project (Innovative Sustainable Packaging to Safeguard Our Food and Our Planet) is part of the PRIMA program, funded by the European Union’s Horizon 2020 research and innovation program and the national research funding agency (PCI2024-153409). Financial support from the Severo Ochoa Centre of Excellence accreditation (CEX2021-01189-S) funded by MCIN/AEI/10.13039/501100011033, With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Reversible low-pressure barocaloric effect from mixed‑phase stabilization in a hybrid cadmium perovskite [Dataset]

  • Charkiolakis, Emmanouil K.
  • Gracia, David
  • Blasco, Javier
  • Cuartero, Vera
  • Popescu, Catalin
  • Liu, Xiaojiao
  • Subías, Gloria
  • Evangelisti, Marco
[Sample preparation and characterization] The layered hybrid organic–inorganic perovskite (C9H19NH3)2CdCl4 (C9CdCl) was synthesized following the procedure described in the associated manuscript. Phase purity was verified by powder X-ray diffraction (PXRD)., [Adiabatic calorimetry] Heat-capacity measurements were performed using an AK-6-25 adiabatic calorimeter (AOZT Termis). Measurements were carried out over the temperature range encompassing the structural phase transitions. The transition entropy and enthalpy changes were determined from the temperature dependence of the heat capacity., [Differential scanning calorimetry] Differential scanning calorimetry (DSC) measurements were conducted using a TA Instruments DSC Q2000 calorimeter equipped with a Refrigerated Cooling System (RCS90) and a standard DSC cell. Approximately 4 mg of sample was sealed in Tzero Aluminum Hermetic pans and measured under a continuous nitrogen flow. Heat-capacity measurements were calibrated using sapphire standards. Additional DSC experiments were performed at different heating and cooling rates to evaluate the kinetic dependence of the phase transitions., [Powder X-ray diffraction] Laboratory PXRD measurements were carried out using a Rigaku D-Max diffractometer with Cu Kα₁,₂ radiation over the 2θ range 2.5–50°. Temperature-dependent PXRD data were collected using a Rigaku variable-temperature stage, allowing in situ measurements between 93 and 573 K., [Synchrotron X-ray powder diffraction] High-resolution synchrotron X-ray powder diffraction (SXRPD) measurements were performed at the MSPD beamline of the ALBA Synchrotron (Spain) and at beamline I15 of Diamond Light Source (United Kingdom). Temperature-dependent and pressure-dependent diffraction patterns were collected to investigate the structural evolution across the phase transitions. At Diamond Light Source, high-pressure diffraction experiments were performed using a high-pressure jump cell enabling continuous pressure variation up to approximately 3.5 kbar. Powder samples were loaded into sealed Kapton capillaries, while pressure was transmitted hydrostatically through deionized water surrounding the capillary. Both isothermal and isobaric diffraction measurements were carried out over the ranges 278–330 K and 0.4–2.0 kbar., [High-pressure calorimetry] Barocaloric measurements were performed using a custom-built high-pressure calorimetric setup incorporating a calorimeter within a Be–Cu pressure cell. A surface-mount resistor served simultaneously as sample holder and temperature sensor, while Daphne 7373 oil was employed as the hydrostatic pressure-transmitting medium. Measurements were conducted in an Oxford Instruments OptistatDN cryostat operating between 77 and 400 K., Pressure‑driven phase transitions provide a means to modulate entropy in solids, although achieving large and reversible caloric responses remains a central challenge. The layered hybrid organic-inorganic perovskite (C9H19NH3)2CdCl4 exhibits two first-order transitions near room temperature that underpin its barocaloric response. High‑pressure calorimetry combined with synchrotron X‑ray diffraction shows that compression stabilizes a mixed‑phase region over a wide pressure-temperature range rather than inducing a complete transformation. Consequently, the effective entropy change decreases with pressure, while a substantial reversible contribution is preserved, yielding reversible entropy and temperature changes of ΔSᵣₑᵥ ≈ 136 J kg⁻1 K⁻1 and ΔTᵣₑᵥ ≈ 17 K for a pressure change of 0.8 kbar. This leads to a refrigerant capacity exceeding 4 kJ kg⁻1 with a favorable coefficient of performance in the low-pressure regime. Notably, the large reversible temperature changes achieved at comparatively low pressures and close to room temperature highlight the potential of this material for solid-state cooling. Overall, these results demonstrate that high caloric performance can be achieved without complete phase transformation, reflecting a trade-off between entropy change and reversibility in soft hybrid lattices., This work was supported by Spanish MICIU/AEI/10.13039/501100011033/ and ERDF/EU (PID2024-159457OB-C21, CEX2023-001286-S). This work was carried out with the support of Diamond Light Source, instrument I15 (proposal CY40151) and ALBA Synchrotron, MSPD beamline (proposal 2024098680). E.K.C. acknowledges financial support from MICIU through a doctoral fellowship (PRE2022-103760). The authors acknowledge the Servicio General de Apoyo a la Investigación from Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Raw data behind tables-Microstructure carob fruit extracts extracts-based bigels [Dataset]

  • Cofrades, Susana
  • Saiz, Arancha
  • Gutiérrez, Alicia
  • Álvarez, M. Dolores
The raw data used in the manuscript on carob-based bigels and their digestive behavior are included., The Excel file contains the original data used in the tables, and the readme_Dataset document describes the dataset structure and experimental conditions to ensure transparency and reproducibility., This work was funded by the Community of Madrid, TEC-2024/BIO-307 BICAROBESITY-CM (ORDER 5696/2024, B.O.C.M. Nº. 307 12/26/2024) and Project PID2024-155166OB-I00 supported by MICIU/AEI/10.13039/501100011033 and by FEDER, EU., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dissolved N2O and CH4 concentrations and ancillary water chemistry in the inundated tidal salt marshes of Donana National Park (SW Spain), 2016-2018

  • Huertas, I. Emma
  • Paz, Mercedes de la
  • Pérez, Fiz F.
  • Navarro, Gabriel
  • Flecha, Susana
Donana_N2O_CH4_marsh_2016-2018.csv provides data from the 16 field surveys conducted between March 2016 and March 2018 (99 water samples). Temperature, salinity and pH were measured in situ. Dissolved gases, inorganic nutrients, total dissolved nitrogen, dissolved organic carbon, dissolved oxygen and chlorophyll a were measured in the laboratory. DATETIME_UTC is the sampling date and time in Coordinated Universal Time (YYYY-MM-DD HH:MM, UTC). SITE is the site number (1-7 along the Guadalquivir salinity gradient; 9 = Marisma del Guadiamar). HYDRO_CLASS is the hydrological class of the site (creek_inflow = tidal creek; interior = sheet-flow marsh interior; guadiamar = Guadiamar endpoint). LAT and LON are the site latitude and longitude in decimal degrees (WGS84). TEMPERATURE_C and SALINITY are the in-situ water temperature (degrees Celsius) and salinity (practical salinity scale, dimensionless). PH is the in-situ pH on the NBS scale. O2_MG_L is dissolved oxygen by Winkler titration (mg L-1). AOU_UMOL_KG is the apparent oxygen utilisation (micro mol per kilogram; calculated, not measured). CHLOROPHYLL_A_UG_L is chlorophyll a (micro g L-1). DOC_MG_L is dissolved organic carbon and TDN_MG_L is total dissolved nitrogen, both in mg L-1. NH4_UMOL_L, NO2_UMOL_L and NO3_UMOL_L are ammonium, nitrite and nitrate concentrations, respectively, and PO4_UMOL_L and SIO4_UMOL_L are phosphate and silicate concentrations, all in micro mol L-1. PCO2_UATM is the partial pressure of CO2 (micro atm; calculated from the measured pH and total alkalinity, not measured directly). N2O_NMOL_L and CH4_NMOL_L are the dissolved nitrous oxide and dissolved methane concentrations (n mol L-1)., This data set comprises discrete water-column measurements of dissolved nitrous oxide (N2O) and methane (CH4), together with the accompanying physico-chemical and biogeochemical variables, used to assess the role of the inundated tidal salt marshes of Donana National Park (SW Spain; Guadalquivir estuary and Guadiamar tributary, bounding box approximately Long: -6.39 to -6.27, Lat: 36.86 to 37.08, Datum: WGS84) in estuarine nitrogen removal and in regulating nitrous oxide emissions. The data document the spatial gradient of dissolved gases and nutrients across the marshland, from the tidal creeks that convey estuarine water into the marsh to the inner sheet-flow areas and the upstream Guadiamar marsh, over the period 2016-2018. They also support the calculation of air-water N2O and CH4 fluxes and of the marshland greenhouse gas budget., This research was funded by the Organismo Autonomo de Parques Nacionales (Spanish Ministry for Agriculture, Food and Environment), project 1539/2015. Fiz F. Pérez was supported by the FICARAM+ project (PID2023-148924OB-I00) funded by MICIU/AEI/10.13039/501100011033 and FEDER, UE. S. Flecha was hired under the Generation D initiative, promoted by Red.es (Ministry for Digital Transformation and the Civil Service), financed by the Recovery, Transformation and Resilience Plan through the European Union's NextGeneration funds (MMT24-PTI+OCEANS-01). M. de la Paz acknowledges support from the Spanish Ministry of Science under grant PTA2024-025174-I., - Dissolved N2O and CH4: static headspace equilibration gas chromatography on an Agilent 7890 GC with an Electron Capture Detector (N2O) and a Flame Ionization Detector (CH4) (de la Paz et al. 2015)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary data Mapping the use of ecological indicators across the marine research landscape: A global bibliometric analysis [Dataset]

  • Cecchini, Fabiola Maria
  • Espina, Paula
  • Violino, Simona
  • Costa, Corrado
  • Aguzzi, Jacopo
  • Chatzievangelou, Damianos
This work was supported by the European Union through the projects REDRESS [GAP-101135492], DIGI4ECO [GAP-101112883], MERLIN [GAP-101189796], SUN-BIO [GAP-101157493], TERRATWIN [GAP-101214557]. Other participating actions are those funded by the Spanish Governement (Ministerio de Ciencias, Innovación y Universidades-MICIU): AI4SEA (AIA2025–163346-C44) and SMART-ME (PID2024-1553440B-C31). DC was funded by the European Union under the Horizon Europe MSCA grant 101,104,596. The research has been carried out within the framework of the project “Severo Ochoa Center of Excellence” financially supported by ICM-CSIC (CEX2024-001494-S) and the Research Unit Tecnoterra (ICM-CSIC/UPC) of the Spanish Government, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Inferring seagrass meadow resilience from self-organized spatial patterns (Version v1.0.0)

  • Giménez-Romero, Alex
  • Campo, Elena del
  • Matías, Manuel A.
All versions are available at DOI 10.5281/zenodo.18977493, This archive contains the code, trained models, and derived datasets associated with the study “Inferring seagrass meadow resilience from self-organized spatial patterns”. The archive provides a self-contained companion resource to the manuscript. It includes the computational workflow used to generate synthetic seascapes from a mechanistic model of seagrass self-organization, preprocess the simulated patterns, train convolutional neural network (CNN) models, and apply the trained models to empirical habitat cartography from the Balearic Islands. The archive contains: the full code repository used in the study; trained deep-learning models for pattern classification and effective mortality estimation; geospatial outputs of predicted meadow states and inferred effective mortality for each region; summary tables of predicted pattern classes; a pixel-level table of inferred effective mortality and predicted pattern type; a patch-level dataset of structural descriptors, inferred mortality, and predicted pattern type; a text file mapping the numerical pattern labels to their ecological class names. The central aim of the study is to infer the condition of Posidonia oceanica meadows from self-organized spatial patterns. To do so, the workflow combines ecological theory, machine learning and empirical benthic cartography. The resulting models are used to predict discrete meadow states and a continuous effective mortality parameter from spatial pattern alone. This archive is intended to facilitate reproducibility, reuse of the trained models, and inspection of the derived spatial products. Notes on archive contents: models/ contains the trained models in HDF5 (.h5) format together with metadata files. patterns_summary.csv summarizes the number of predicted patterns of each type in each region. patterns_mortalities_all.parquet contains pixel-level predictions, including inferred effective mortality and predicted pattern type. measures_dataset.csv contains patch-level structural descriptors together with inferred mortality and predicted pattern type. patterns/ contains GeoTIFF and GeoJSON files of predicted pattern classes for each region. mortality/ contains GeoTIFF files of inferred effective mortality for each region. pattern_label_mapping.txt provides the translation between numerical class labels and ecological pattern names. The empirical habitat cartography used in the study was obtained from regional data sources from the Balearic Islands. Access to the original raw habitat data depends on the corresponding providers., Ministerio de Ciencia, Innovación y Universidades PID2021-123723OB-C22 Ministerio de Ciencia, Innovación y Universidades TED2021-131836B-I00 Ministerio de Ciencia, Innovación y Universidades PID2024-156062OB-I00 Ministerio de Ciencia, Innovación y Universidades CEX2021-001164-M Ministerio de Ciencia, Innovación y Universidades JDC2024-053275-I, With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001164-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

DATASET - Defect engineering for trap identification and persistent luminescence enhancement in NIR-emitting Cr3+-doped LaGaO3 phosphor

  • González-Mancebo, Daniel
  • Merino, Lucía
  • Becerro, Ana Isabel
  • Ocaña, Manuel
This dataset contains all the data presented in the Figures associated to the manuscript entitled "Defect engineering for trap identification and persistent luminescence enhancement in NIR-emitting Cr3+-doped LaGaO3 phosphor", by Daniel González-Mancebo, Lucía Merino, Ana I. Becerro and Manuel Ocaña., The data contain X-ray diffraction patterns, UV-Vis-NIR spectra, photoluminescence spectra, persistent luminescence spectra, persistent luminescence curves and thermoluminescence curves., This project received funding from the Spanish Ministry of Science, Innovation, and Universities under grant PID2024-161708OB-I00 funded by MICIU/AEI/ 10.13039/501100011033 and ERDF/EU., File List: Figure 1a Cr: X-ray diffraction pattern of LaGaO3:0.5Cr sample Figure 1a CrCa: X-ray diffraction pattern of LaGaO3:0.5Cr,0.5Ca sample Figure 1a CrGe: X-ray diffraction pattern of LaGaO3:0.5Cr,0.5Ge sample Figure 1b Cr- yellow: UV–visible-NIR spectrumof LaGaO3:0.5Cr sample Figure 1b CrCa - red: UV–visible-NIR spectrumof LaGaO3:0.5Cr,0.5Ca sample Figure 1b CrGe - blue: UV–visible-NIR spectrumof LaGaO3:0.5Cr,0.5Ge sample Figure 1c Cr- yellow: PLE spectrum of LaGaO3:0.5Cr sample Figure 1c CrCa - red: PLE spectrum of LaGaO3:0.5Cr,0.5Ca sample Figure 1c CrGe - blue: PLE spectrum of LaGaO3:0.5Cr,0.5Ge sample Figure 1e Cr- yellow: PL spectrum of LaGaO3:0.5Cr sample Figure 1e CrCa - red: PL spectrum of LaGaO3:0.5Cr,0.5Ge sample Figure 1e CrGe - blue: PL spectrum of LaGaO3:0.5Cr,0.5Ge sample Figure 1f Cr- yellow: PL decay curve of LaGaO3:0.5Cr sample Figure 1f CrCa - red: PL decay curve of LaGaO3:0.5Cr,0.5Ca sample Figure 1f CrGe - blue: PL decay curve of LaGaO3:0.5Cr,0.5Ge sample Figure 2a Cr -yellow: Normalised PersL spectrum of LaGaO3:0.5Cr sample Figure 2a CrCa -red: Normalised PersL spectrum of LaGaO3:0.5Cr,0.5Ca sample Figure 2a CrGe - blue: Normalised PersL spectrum of LaGaO3:0.5Cr,0.5Ge sample Figure 2b Cr -yellow: Normalised PersLE spectrum of LaGaO3:0.5Cr sample Figure 2b CrCa -red: Normalised PersLE spectrum of LaGaO3:0.5Cr,0.5Ca sample Figure 2b CrGe - blue: Normalised PersLE spectrum of LaGaO3:0.5Cr,0.5Ge sample Figure 2c Cr -yellow: PersL decay curve of LaGaO3:0.5Cr sample Figure 2c CrCa -red: PersL decay curve of LaGaO3:0.5Cr,0.5Ca sample Figure 2c CrGe - blue: PersL decay curve of LaGaO3:0.5Cr,0.5Ge sample Figure 2d Cr -yellow: TL curve of LaGaO3:0.5Cr sample Figure 2d CrCa -red: TL curve of LaGaO3:0.5Cr,0.5Ca sample Figure 2d CrGe - blue: TL curve of LaGaO3:0.5Cr,0.5Ge sample Figure 3a green nitrogen: UV–visible-NIR spectrum of LaGaO3:0.5Cr sample calcined under nitrogen Figure 3a yellow air: UV–visible-NIR spectrum of LaGaO3:0.5Cr sample calcined uin air Figure 3b green nitrogen: PL spectrum of LaGaO3:0.5Cr sample calcined under nitrogen Figure 3b inset green nitrogen: PL decay curve of LaGaO3:0.5Cr sample calcined under nitrogen Figure 3b inset yellow air: PL decay curve of LaGaO3:0.5Cr sample calcined in air Figure 3b yellow air: PL spectrum of LaGaO3:0.5Cr sample calcined in air Figure 3c green nitrogen: PersL decay curveof LaGaO3:0.5Cr sample calcined under nitrogen Figure 3c yellow air: PersL decay curve of LaGaO3:0.5Cr sample calcined in air Figure 3d green nitrogen: TL curve of LaGaO3:0.5Cr sample calcined under nitrogen Figure 3d yellow air: TL curve of LaGaO3:0.5Cr sample calcined in air Figure 5a Ga deffect - blue: PersL decay curve of LaGaO3:0.5Cr sample prepared under Ga-deficient conditions Figure 5a stoichiometric yellow: PersL decay curve of LaGaO3:0.5Cr sample prepared under stoichiometric Ga/La conditions Figure 5b Ga deffect - blue: TL curve of LaGaO3:0.5Cr sample prepared under Ga-deficient conditions Figure 5b stoichiometric yellow: TL curve of LaGaO3:0.5Cr sample prepared under Gstoichiometric Ga/La conditions, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset information and code used in: “Functional phylosymbiosis in birds: Phylogeny and antimicrobial properties of bacterial symbionts in Bucerotiformes”

  • Barón, María Dolores
  • Martín-Vivaldi, Manuel
  • Martínez-Renau, Ester
  • Arlettaz, Raphaël
  • Engelbrecht, Derek
  • Enkvist, Charlotte
  • van Rensburg, Elbert Lukas Jansen
  • Zhang, Lu
  • Martín-Platero, Antonio M.
  • Martínez-Bueno, Manuel
  • Martínez García, Ángela
  • Ruiz-Castellano, Cristina
  • Schaub, Michael
  • Stanback, Mark
  • van de Ven, Tanja M. F. N.
  • Videvall, Elin
  • Liang, Wei
  • Soler, Juan José
[Description of methods used for collection/generation of data] In this study, we characterised the uropygial secretion microbiota of hoopoes (three subspecies: Upupa epops epops, Upupa epops longirostris and Upupa epops africana), hornbills (three species: Tockus leucomelas, Tockus monteiri, Tockus rufirostris), and woodhoopoes (two species: Phoeniculus purpureus and Rhinopomastus cyanomelas). We also sampled European rollers (Coracias garrulus). To sample the uropygial secretion, we used sterilised capillaries for hornbills and rollers, and for hoopoes and woodhoopoes we inserted a sterilised micropipette tip (1-10 µl) into the uropygial gland papilla to collect the secretion. All samples were cultivated on TSA petri dishes, after 24 hours we counted the number of colonies and isolated 5 bacterial colonies per sample. We then used the isolates for antimicrobial tests against three indicator bacteria (Bacillus licheniformis, Enterococcus faecalis and Listeria innocua). DNA was extracted in the laboratory, and samples were sequenced at Novogene Co., Ltd services (Cambridge, UK) on an Illumina Novaseq 6000 platform., Dataset information and code used in the manuscript "Functional phylosymbiosis in birds: Phylogeny and antimicrobial properties of bacterial symbionts in Bucerotiformes", accepted for publication in Animal Microbiome. The dataset includes metadata, ASV tables, taxonomy tables, phylogenetic trees, and R scripts used for data analysis. It also includes phyloseq objects to reproduce the results. The aim of the study was to explore phylosymbiosis in Bucerotiformes including hoopoes, hornbills, green woodhoopoes, and common scimitarbill. Uropygial secretion samples were collected in Spain, Switzerland, Namibia, South Africa and China. Furthermore, we also tested if the observed phylosymbiosis patterns have evolved as a consequence of the benefits derived from host’s bacterial symbionts (functional phylosymbiosis); these benefits were measured as defence function (if the symbionts were offering protection against pathogens and parasites by including symbionts in the gland with antimicrobial activity). We used the V6-V8 region from the 16S rRNA gene to characterise the uropygial secretion microbiota., This work was supported by Ministerio de Ciencia e Innovación/Agencia Estatal de Investigación/10.13039/501100011033 and “Fondo Europeo de Desarrollo Regional, a way of making Europe” with the projects numbers PID2020-117429GB-C21, PID2020-117429GB-C22, PID2024-159017NB-C31 and PID2024-159017NB-C32. Two projects from the Andalusian government, Dirección General de Investigación y Transferencia de Conocimiento, and European (FEDER) funds (P-18-FR-2215 and A-RNM-495-UGR18). María Dolores Barón was financed by a predoctoral contract (PRE2021-099473) during the study., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary information Convergent genomic trajectories shape adaptation to life on land across animal lineages [Dataset]

  • Martínez-Redondo, Gemma Isabel
  • Eleftheriadi, Klara
  • Salces-Ortiz, Judit
  • Escudero, Nuria
  • Fernández-Álvarez, Fernando Ángel
  • Carbonetto, Belén
  • Vargas-Chávez, Carlos
  • García-Vernet, Raquel
  • Palma-Guerrero, Javier
  • Rentería, Libe
  • Rojo, Iñaki
  • Chiva, Cristina
  • Sabidó, Eduard
  • Bombarely, Aureliano
  • Fernández García, Rosa María
The data results S1 to S73 generated in this study are provided in the Supplementary Data file, Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and ESF Investing in your future grant 2021 FI_B 00476 (GIMR) Beatriu de Pinós fellowship from Secretaria d’Universitats i Recerca del Departament de Recerca i Universitats of the Generalitat de Catalunya Ref. BP 2021 00035 (FÁFÁ) Ramón y Cajal fellowship Ref. RYC2023-043494-I (FÁFÁ) MCIN/AEI /10.13039/501100011033 and FSE+ grant CEX2024-001494-S (FÁFÁ) Spanish Ministry of Universities and the European Union Next Generation EU/PRTR Margarita Salas grant (RGV) European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme grant agreement no. 948281 (RF) European Commission’s Horizon Europe Research and Innovation programme grant agreement no. 101129751 OSCARS project (RF) Agencia Estatal de Investigación, project PID2024-161173NB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF, EU (RFSecretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and ESF Investing in your future grant 2021 FI_B 00476 (GIMR) Beatriu de Pinós fellowship from Secretaria d’Universitats i Recerca del Departament de Recerca i Universitats of the Generalitat de Catalunya Ref. BP 2021 00035 (FÁFÁ) Ramón y Cajal fellowship Ref. RYC2023-043494-I (FÁFÁ) MCIN/AEI /10.13039/501100011033 and FSE+ grant CEX2024-001494-S (FÁFÁ) Spanish Ministry of Universities and the European Union Next Generation EU/PRTR Margarita Salas grant (RGV) European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme grant agreement no. 948281 (RF) European Commission’s Horizon Europe Research and Innovation programme grant agreement no. 101129751 OSCARS project (RF) Agencia Estatal de Investigación, project PID2024-161173NB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF, EU (RF), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Genomic basis Animal Terrestrialization [Dataset]

  • Martínez-Redondo, Gemma Isabel
  • Eleftheriadi, Klara
  • Salces-Ortiz, Judit
  • Escudero, Nuria
  • Fernández-Álvarez, Fernando Ángel
  • Carbonetto, Belén
  • Vargas-Chávez, Carlos
  • García-Vernet, Raquel
  • Palma-Guerrero, Javier
  • Rentería, Libe
  • Rojo, Iñaki
  • Chiva, Cristina
  • Sabidó, Eduard
  • Bombarely, Aureliano
  • Fernández García, Rosa María
Code available on GitHub (https://github.com/MetazoaPhylogenomicsLab/Martinez-Redondo-Eleftheriadi_et_al_2025_Genomic_basis_animal_terrestrialization), Data for the manuscript Martínez-Redondo, Eleftheriadi et al. 2025: Independent genomic trajectories shape adaptation to life on land across animal lineages, Secretaria d’Universitats i Recerca del Departament d’Empresa i Coneixement de la Generalitat de Catalunya and ESF Investing in your future grant 2021 FI_B 00476 (GIMR) Beatriu de Pinós fellowship from Secretaria d’Universitats i Recerca del Departament de Recerca i Universitats of the Generalitat de Catalunya Ref. BP 2021 00035 (FÁFÁ) Ramón y Cajal fellowship Ref. RYC2023-043494-I (FÁFÁ) MCIN/AEI /10.13039/501100011033 and FSE+ grant CEX2024-001494-S (FÁFÁ) Spanish Ministry of Universities and the European Union Next Generation EU/PRTR Margarita Salas grant (RGV) European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme grant agreement no. 948281 (RF) European Commission’s Horizon Europe Research and Innovation programme grant agreement no. 101129751 OSCARS project (RF) Agencia Estatal de Investigación, project PID2024-161173NB-I00 funded by MICIU/AEI/10.13039/501100011033 and ERDF, EU (RF), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset for Thermoporoelastic flow control strategies for enhancing the longevity of hydraulic fracture-based enhanced geothermal systems

  • Tangirala, Sri Kalyan
  • Kivi, Iman Rahimzadeh
  • Vilarrasa, Víctor
ResFrac is a commercial software and requires a license to use it., [Relationship between files, if important] Folders named no_FCDs and with_FCDs contain the models where no FCDs were used and the models where FCDs were used. The no_FCDs folder contains 6 subfolders, each of which have their respective model files. The with_FCDs folder has 3 subfolders where 135kgps and 150kgps, each have 3 of their own subfolders that contain the model files corresponding to when the FCDs were activated during circulation. The pre existing fracture folder in the with_FCDs folder has its model files where FCDs were activated from the beginning of circulation., This dataset includes the input files of the numerical models used in the manuscript for simulating different cases of the hydraulic fracture-based Enhanced Geothermal Systems (EGS). There are two main folders named ‘no_FCDs’ and ‘with_FCDs’ that contain subfolders corresponding to their different circulation flow rates and pre-existing fracture cases. In the no_FCDs folder, there are 6 subfolders where 5 of them are named with their circulation flow rates (90 kgps, 105 kgps, 120 kgps, 135 kgps and 150 kgps) and another subfolder named ‘pre existing fracture’. The folder named with_FCDs has three folders named ‘135 kgps’, ‘150 kgps’ and ‘pre existing fracture’. The 135 kgps folder has subfolders named ‘from start’, ‘from 21 yr’ and ‘from 24 yr’. The 150 kgps folder has subfolders named ‘from start’, ‘from 13 yr’ and ‘from 16 yr’. Within each subfolder, the model is defined by two text files in a ResFrac-specific keyword format. The 'settings' file and the 'input' file together contain the simulation-specific parameters, including material and formation properties, initial and boundary conditions, the mesh definition (matrix region extent and element sizing), the fluid and relative permeability models, and the well controls and treatment schedule. Because the model was built on a rectilinear grid within the user interface, no separate mesh file is generated and the gridding is contained directly within these input files., S.K.T. and V.V. acknowledge funding from the European Research Council (ERC) under the European Union’s Horizon Europe Research and Innovation Program through the Proof of Concept NOSHAKE under Grant agreement No. 101248689. I.R.K. acknowledges funding from MICIU/AEI /10.13039/501100011033 and from the FSE+ through the ‘Ramón y Cajal’ fellowship (reference RYC2024-048711-I). V.V. acknowledges support from the Spanish Ministry of Science, Innovation and Universities through the project HydroPoreII (PID2022-137652NB-C44). IMEDEA is an accredited "Maria de Maeztu Excellence Unit" (Grant CEX2021-001198, funded by MICIU/AEI/10.13039/501100011033)., With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001198)., File List: README.txt (this file) no_FCDs input_TE_on_90_fln2_noFCDn_45.txt settings_TE_on_90_fln2_noFCDn_45.txt input_TE_on_105_fln2_noFCDn_45.txt settings_TE_on_105_fln2_noFCDn_45.txt input_TE_on_120_fln2_noFCDn_45y.txt settings_TE_on_120_fln2_noFCDn_45y.txt input_TE_on_135_fln2_noFCDn_45y.txt settings_TE_on_135_fln2_noFCDn_45y.txt input_TE_on_150_fln2_noFCDn_45y.txt settings_TE_on_150_fln2_noFCDn_45y.txt input_TE_on_120_fln2_noFCDn_crack1.txt settings_TE_on_120_fln2_noFCDn_crack1.txt with_FCDs input_TE_on_135_fln2_FCDn0p125_45y.txt settings_TE_on_135_fln2_FCDn0p125_45y.txt input_TE_on_135_fln2_21yFCDn45y.txt settings_TE_on_135_fln2_21yFCDn45y.txt input_TE_on_135_fln2_FCDn_24_45.txt settings_TE_on_135_fln2_FCDn_24_45.txt input_TE_on_150_fln2_FCD0p125_45y.txt settings_TE_on_150_fln2_FCD0p125_45y.txt input_TE_on_150_fln2_13yFCDn0p125_45.txt settings_TE_on_150_fln2_13yFCDn0p125_45.txt input_TE_on_150_fln2_FCDn_16_45.txt settings_TE_on_150_fln2_FCDn_16_45.txt input_TE_on_120_fln2_FCDn_crack.txt settings_TE_on_120_fln2_FCDn_crack.txt These models were simulated using a commercial software ResFrac. In order to run the models, a valid license needs to be taken from ResFrac to use their simulator., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset for coupled hydromechanical modelling of CO2 leakage through fractured caprocks

  • Vafaie, Atefeh
  • Kivi, Iman Rahimzadeh
  • Makhnenko, Roman Y.
  • Vilarrasa, Víctor
This dataset contains the input files for numerical assessment of the potential for CO2 leakage through a fractured caprock. Numerical models solve for coupled hydromechanical processes, including two-phase flow of CO2 and water, mutual dissolution of the two phases, and rock deformation. Models are two-dimensional and use a plane-strain formulation to represent CO2 injection through a horizontal wellbore into a multilayered sedimentary basin. The geological setting comprises of a sequence of aquifers and aquitards overlying the crystalline basement. A fracture dipping at 60º crosses the caprock directly overlying the storage aquifer, and its base is located at a horizontal distance of 100 m from the injection wellbore. We assume two scenarios depending on the sealing properties of the caprock: (1) a high-seal scenario in which aquitard properties represent those of intact Opalinus Clay, and (2) a low-seal scenario, where the aquitard properties represent those of Eau Claire Shale. Hydromechanical properties of the geological formations and the fracture are taken from experimental measurements [ , ]. The dataset has two folders, each containing the input files for one of the two leakage assessment scenarios mentioned above: “High_seal_scenario”, in which the considered caprocks have low intrinsic permeability k=6·10-21 m2 and high capillary entry pressure p0=4.55 MPa, and “Low_seal_scenario” in which the caprocks have higher permeability k=2.8·10-18 m2 and lower capillary entry pressure p0=0.1 MPa. The power-law exponents for the relative permeability relations and the van Genuchten exponent for the capillary retention curves also differ between the two scenarios following direct experimental measurements. In each folder, there is a file with the name of the folder ending in “_gen.dat” which contains the model input data, including material properties, initial and boundary conditions, and the time intervals. There is also a file ending in “_gri.dat” that contains the information on the mesh. The file “root.dat” includes the name of the model. To run the simulation, execute the CODE_BRIGHT executable “CODE_BRIGHT_2024.exe” in the same folder as the three input files., A.V. and V.V. acknowledge funding from MICIU/AEI /10.13039/501100011033 and from the FSE+ through the ‘Juan de la Cierva’ fellowship (reference JDC2024-053739-I). I.R.K. acknowledges funding from MICIU/AEI /10.13039/501100011033 and from the FSE+ through the ‘Ramón y Cajal’ fellowship (reference RYC2024-048711-I). V.V. acknowledges support from the Spanish Ministry of Science, Innovation and Universities through the project HydroPoreII (PID2022-137652NB-C44)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data and code from: Acoustic and visual traits predict species nuclearity in Neotropical mixed-species bird flocks

  • García-Navas, Vicente
  • Martínez Núñez, Carlos
Mixed-species bird flocks constitute a striking example of heterospecific sociality, offering participants potential benefits such as enhanced foraging efficiency and reduced predation risk. Yet, not all species join these flocks with the same frequency. Moreover, beyond simply participating, species may play distinct roles within flock networks. While some bird species may exhibit high nuclearity and occupy a central position in flock formation, cohesion, and dynamics (i.e., social hubs), others are merely peripheral followers. Understanding how phenotypic and ecological traits relate to both flocking propensity and network position can provide key insights into the drivers of interspecific social behavior in birds. Using a comprehensive dataset of over 3,000 flocks, we applied network theory to explore the relationship between species-level network metrics (connectivity, strength, and closeness), flocking propensity, and key phenotypic traits (relative eye size, beak shape, maximum song frequency, and plumage coloration) in Neotropical birds. Bayesian phylogenetic models revealed that flocking propensity was positively associated with maximum song frequency and carotenoid-based coloration, and negatively associated with relative eye size. In addition, the extent of white in plumage significantly predicted species centrality. This is the first study to evaluate whether acoustic and visual traits predict both flocking propensity and a species’ structural role within flock networks. These findings, along with the moderate phylogenetic signal detected in network metrics, suggest that the evolution of heterospecific sociality may involve distinct morphological and sensory adaptations., Agencia Estatal de Investigación: PID2024-155134NB-I00, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Structures, rate constants and spectroscopic information for the article: Laboratory spectroscopy, theoretical characterization, and astronomical search for syn-propenethial (CH2CHCHS) Version v1 [dataset]

  • Molpeceres, Germán
  • Cabezas, Carlos
  • Kolesniková, Lucie
Repository structure and data format The theoretical structures and associated metadata are provided in a compressed NumPy archive (.npz). Cartesian coordinates are reported in ångström (Å). The dataset can be loaded in Python as follows: import numpy as np data = np.load("ch2chchs.npz", allow_pickle=True) data["R"] # Cartesian coordinates of nuclei (Å) data["N"] # Number of atoms in each structure data["Z"] # Nuclear charges data["name"] # Structure names data["level_of_theory"] # Electronic-structure level of theory data["software_used"] # Software and interface used data["curator"] # Dataset curator and contact information data["doi"] # Dataset DOI data["date_of_creation"] # Date of creation The archive contains 12 molecular structures corresponding to stationary points and related species involved in the reaction mechanism, The repository also includes a txt directory containing the calculated rate constants for the isomerization reactions. These plain-text files are self-explanatory and provide the kinetic data associated with the structures in the archive. Line lists used in the spectroscopic analysis are provided as files with the extension .lin, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Structures, rate constants and spectroscopic information for the article: Laboratory spectroscopy, theoretical characterization, and astronomical search for syn-propenethial (CH2CHCHS) Version v2 [dataset]

  • Molpeceres, Germán
  • Cabezas, Carlos
  • Kolesniková, Lucie
The theoretical structures and associated metadata are provided in a compressed NumPy archive (.npz). Cartesian coordinates are reported in ångström (Å). The dataset can be loaded in Python as follows: import numpy as np data = np.load("ch2chchs.npz", allow_pickle=True) data["R"] # Cartesian coordinates of nuclei (Å) data["N"] # Number of atoms in each structure data["Z"] # Nuclear charges data["name"] # Structure names data["level_of_theory"] # Electronic-structure level of theory data["software_used"] # Software and interface used data["curator"] # Dataset curator and contact information data["doi"] # Dataset DOI data["date_of_creation"] # Date of creation The archive contains 12 molecular structures corresponding to stationary points and related species involved in the reaction mechanism, The repository also includes a txt directory containing the calculated rate constants for the isomerization reactions. These plain-text files are self-explanatory and provide the kinetic data associated with the structures in the archive. Line lists used in the spectroscopic analysis are provided as files with the extension .lin, EDIT 1 (2026-08-02) Added fits to the experimental value along with the line list catalogue (please note that the latter was also included in the last version) along with Metadata for them (ReadMe.txt file), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data and R code for the study on plant functional traits in Cantabrian Mountain assemblages (Spain, Europe)

  • Ortega, Miguel
  • Obeso Suárez, José Ramón
  • de Bello, Francesco
  • Laiolo, Paola
The repository contains the dataset and R code for the study "Handling mean-variance scaling in intraspecific trait variability and implications for trait-environment analyses"., his dataset (traits.csv) contains sub-individual measurements of functional traits collected from plant species across the Cantabrian Mountains in north-western Spain in 2023-2025. The traits included are specific leaf area (SLA; mm²/mg), leaf area (LA; mm²), and flower size (FS), quantified as flower dry mass (mg). The data are provided as a CSV file and include the trait measurements together with the associated sampling metadata. These metadata describe the relevant spatial, sampling and observational information required to identify and interpret each measurement (elevation, habitat, plant species richness). The dataset was generated as part of field sampling conducted within research projects funded by the Spanish Ministry of Science (PRE2021-100978) and Innovation and the Spanish Research Agency (PID2020-115259GB-I00, PID2024-155250NB-I00 and PID2023-152801NB-I00)., The repository also includes an R script (code.rmd) documenting the processing and analyses of the data, as well as two serialized R objects containing derived information used in the analyses (random.rds, scales_random.rds)., A README file provides a description of each file (README.txt)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

The Political Show: How Theatricalised Is the Hostility in the Spanish Parliament? [Version v1, Dataset]

  • Arroyo Guardeño, David
  • Chulvi, Berta
  • Rodrigo, Maria F.
  • Paz, Alfonso de
  • Degli Esposti, Sara
This dataset corresponds to the randomly selected sample of "The Political Show: How Theatricalised Is the Hostility in the Spanish Parliament?", https://doi.org/10.1093/pa/gsag035, Digital CSIC no tiene acceso a los archivos originales de la Version v1. Puedes encontrar la Version v2 en el enlace a continuación: https://doi.org/10.5281/zenodo.19570328, This study tests the theatricalization hypothesis in the Spanish Parliament, defined as the difference between the rhetoric employed by Members of Parliament in frontstage (Plenary Sessions) and backstage (Legislative Committees) settings. Drawing on a balanced random sample from a corpus of over 200,000 speeches delivered between 1996 and 2023, we apply natural language processing tools to compute a Negative Sentiment Index and an Anger Index. Results statistically demonstrate an increase in theatricalization from 2017 onward, with large effect sizes. This effect is moderated by party affiliation and by the party’s power position (government or opposition)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

The Political Show: How Theatricalised Is the Hostility in the Spanish Parliament? [Version v2, Dataset]

  • Arroyo Guardeño, David
  • Chulvi, Berta
  • Rodrigo, Maria F.
  • Paz, Alfonso de
  • Degli Esposti, Sara
This dataset corresponds to the randomly selected sample of "The Political Show: How Theatricalised Is the Hostility in the Spanish Parliament?", https://doi.org/10.1093/pa/gsag035, This study tests the theatricalization hypothesis in the Spanish Parliament, defined as the difference between the rhetoric employed by Members of Parliament in frontstage (Plenary Sessions) and backstage (Legislative Committees) settings. Drawing on a balanced random sample from a corpus of over 200,000 speeches delivered between 1996 and 2023, we apply natural language processing tools to compute a Negative Sentiment Index and an Anger Index. Results statistically demonstrate an increase in theatricalization from 2017 onward, with large effect sizes. This effect is moderated by party affiliation and by the party’s power position (government or opposition)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data and code for: Evolutionary decoupling of morphological and behavioural antipredator responses and their hormonal basis across anuran species

  • Rico-Millan, Rafael
  • Liedtke, H. Christoph
  • Lee, Hyeun Ji
  • Buchholz, Daniel R.
  • Gómez-Mestre, Iván
Adaptive plasticity allows organisms to adjust their phenotypes to environmental heterogeneity. Defensive responses to predation risk exemplify such plasticity, which in the case of amphibian larvae can involve changes in morphology, behaviour, physiology, and life histories. These defences are hypothesised to be mediated by the glucocorticoid hormone corticosterone (CORT), but empirical support across species is inconsistent. We experimentally tested the generality of CORT involvement in predator-induced plasticity across larvae from twelve phylogenetically distant anuran genera, exposing them to either predation cues or to different concentrations of exogenous CORT, and comparing their responses. We measured changes in morphology, activity, and life‐history traits, and quantified endogenous CORT levels. Species showed pronounced interspecific variation in morphological and behavioural plasticity. Perceived predation risk did not consistently elevate endogenous CORT concentrations across species. Moreover, predator‐induced changes in body shape were generally distinct, and even opposite, to those elicited by exogenous CORT, indicating that corticosterone is not a direct regulator of anti‐predator defences in amphibian larvae. Nonetheless, we found evidence for an indirect association between CORT and antipredator responses such that species with higher baseline CORT levels tend to have faster developmental rates, greater CORT response to predation cues, but reduced morphological responses, and vice-versa., Funding was provided by the Spanish Ministry of Science (PID2020-119517GB-I00 and PID2024-159390NB-I00) and US National Science Foundation (IOS 2410732), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Warming increases the toxicity of plastic additives in the marine copepod Centropages typicus [Dataset]

  • Aguilera Dal Grande, Paula
  • Omedes Martínez, Sergi
  • Solé, Montserrat
  • Saiz, Enric
This dataset displays biomarkers and mortality % of the tested species under different warming and pullutants treatments, PID2023-150548NB-I00 and PID2024-160452OB-C22 funded by MICIU/AEI /10.13039/501100011033 and by FEDER, and also with funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S). PRE2022-102491 funded by MCIN/AEI/10.13039/501100011033 MICIU/AEI /10.13039/501100011033 and by FSE+, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary Information Unravelling the trophic ecology of the ocean sunfish Mola mola in the western Mediterranean Sea through integrated approaches [Dataset]

  • Borrajo, Oriol
  • García-Barcelona, Salvador
  • Fernández Corredor, Elena
  • Fernández-Álvarez, Fernando Ángel
  • Coll, Marta
  • Navarro, Joan
This work has been funded by the European Union through the European Maritime Fisheries and Aquaculture Fund (EMFAF) within the National Program of collection, management and use of data in the fisheries sector, and by the project OCEANIC (PID2024-162762OB-I00 financed by MCIN/AEI/10.13039/501100011033/FEDER, UE), This work contributes to the Institut de Ciències del Mar "Severo Ochoa Centre of Excellence" accreditation CEX2024-001494-S funded by AEI 10.13039/501100011033 of the Spanish Ministry of Science and Innovation, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Leishmania infantum (strain LLM-2411): Illumina sequencing reads and genomic pseudo-assembly (dataset)

  • Requena, José María
  • González de la Fuente, Sandra
The reads were aligned against the L. infantum (JPCM5 strain) reference genome [1] with the BWA-MEM software [2], using default parameters, and post-processed with Picard tools (https://broadinstitute.github.io/picard/). Variant discovery and genotyping were performed using the Genome Analysis Toolkit (GATK) [3]. Finally, a reference-guided consensus genome (pseudo-assembly) was then generated by mapping the variants to the reference genome (JPCM5 strain) using bcftools consensus [4]. Regions with zero coverage were subsequently masked using bedtools maskfasta [5], and their positions in the pseudo-assemblies were marked by N. A Fasta file with the sequence of the 36 chromosomes is provided (LiL10_consensus_DEF.fasta)., This strain (MHOM/ES/2018/LLM-2411) was isolated from a patient with leishmaniasis at Centro Nacional de Microbiología (WHO Collaborating Centre for Leishmaniasis, Instituto de Salud Carlos IIII, Madrid, Spain). Total DNA was used for short-read whole-genome sequencing at the Centro Nacional de Análisis Genómico (CNAG-CRG) using the Illumina HiSeq platform, generating paired-end reads of 100 bp in length. A total of 34,890,664 reads were obtained, and they are provided in this dataset (LiL10_1.fastq and LiL10_2.fastq)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Leishmania infantum (strain LLM-2413): Illumina sequencing reads and genomic pseudo-assembly [dataset]

  • Requena, José María
  • González de la Fuente, Sandra
The reads were aligned against the L. infantum (JPCM5 strain) reference genome [1] with the BWA-MEM software [2], using default parameters, and post-processed with Picard tools (https://broadinstitute.github.io/picard/). Variant discovery and genotyping were performed using the Genome Analysis Toolkit (GATK) [3]. Finally, a reference-guided consensus genome (pseudo-assembly) was then generated by mapping the variants to the reference genome (JPCM5 strain) using bcftools consensus [4]. Regions with zero coverage were subsequently masked using bedtools maskfasta [5], and their positions in the pseudo-assemblies were marked by N. A Fasta file with the sequence of the 36 chromosomes is provided (LiL7_consensus_DEF.fasta)., This strain (MHOM/ES/2018/LLM-2413) was isolated from a patient with leishmaniasis at Centro Nacional de Microbiología (WHO Collaborating Centre for Leishmaniasis, Instituto de Salud Carlos IIII, Madrid, Spain). Total DNA was used for short-read whole-genome sequencing at the Centro Nacional de Análisis Genómico (CNAG-CRG) using the Illumina HiSeq platform, generating paired-end reads of 100 bp in length. A total of 41,108,278 reads were obtained, and they are provided in this dataset (LiL7_1.fastq and LiL7_2.fastq)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Leishmania infantum (strain LLM-2414): Illumina sequencing reads and genomic pseudo-assembly [dataset]

  • Requena, José María
  • González de la Fuente, Sandra
The reads were aligned against the L. infantum (JPCM5 strain) reference genome [1] with the BWA-MEM software [2], using default parameters, and post-processed with Picard tools (https://broadinstitute.github.io/picard/). Variant discovery and genotyping were performed using the Genome Analysis Toolkit (GATK) [3]. Finally, a reference-guided consensus genome (pseudo-assembly) was then generated by mapping the variants to the reference genome (JPCM5 strain) using bcftools consensus [4]. Regions with zero coverage were subsequently masked using bedtools maskfasta [5], and their positions in the pseudo-assemblies were marked by N. A Fasta file with the sequence of the 36 chromosomes is provided (LiL12_consensus_DEF.fasta)., This strain (MHOM/ES/2018/LLM-2414) was isolated from a patient with leishmaniasis at Centro Nacional de Microbiología (WHO Collaborating Centre for Leishmaniasis, Instituto de Salud Carlos IIII, Madrid, Spain). Total DNA was used for short-read whole-genome sequencing at the Centro Nacional de Análisis Genómico (CNAG-CRG) using the Illumina HiSeq platform, generating paired-end reads of 100 bp in length. A total of 43,397,576 reads were obtained, and they are provided in this dataset (LiL12_1.fastq and LiL12_2.fastq)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Leishmania infantum (strain LLM-2406): Illumina sequencing reads and genomic pseudo-assembly [dataset]

  • Requena, José María
  • González de la Fuente, Sandra
The reads were aligned against the L. infantum (JPCM5 strain) reference genome [1] with the BWA-MEM software [2], using default parameters, and post-processed with Picard tools (https://broadinstitute.github.io/picard/). Variant discovery and genotyping were performed using the Genome Analysis Toolkit (GATK) [3]. Finally, a reference-guided consensus genome (pseudo-assembly) was then generated by mapping the variants to the reference genome (JPCM5 strain) using bcftools consensus [4]. Regions with zero coverage were subsequently masked using bedtools maskfasta [5] and their positions in the pseudo-assemblies marked by N. A Fasta file with the sequence of the 36 chromosomes is provided (LiL3_consensus_DEF.fasta)., This strain (MHOM/ES/2018/LLM-2406) was isolated from a patient with leishmaniasis at Centro Nacional de Microbiología (WHO Collaborating Centre for Leishmaniasis, Instituto de Salud Carlos IIII, Madrid, Spain). Total DNA was used for short-read whole-genome sequencing at the Centro Nacional de Análisis Genómico (CNAG-CRG) using the Illumina HiSeq platform, generating paired-end reads of 100 bp in length. A total of 50,570,814 reads were obtained, and they are provided in this dataset (LiL3_1.fastq and LiL3_2.fastq), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Leishmania infantum (strain LLM-2409): Illumina sequencing reads and genomic pseudo-assembly [dataset]

  • Requena, José María
  • González de la Fuente, Sandra
The reads were aligned against the L. infantum (JPCM5 strain) reference genome [1] with the BWA-MEM software [2], using default parameters, and post-processed with Picard tools (https://broadinstitute.github.io/picard/). Variant discovery and genotyping were performed using the Genome Analysis Toolkit (GATK) [3]. Finally, a reference-guided consensus genome (pseudo-assembly) was then generated by mapping the variants to the reference genome (JPCM5 strain) using bcftools consensus [4]. Regions with zero coverage were subsequently masked using bedtools maskfasta [5] and their positions in the pseudo-assemblies marked by N. A Fasta file with the sequence of the 36 chromosomes is provided (LiL1_consensus_DEF.fasta)., This strain (MHOM/ES/2018/LLM-2409) was isolated from a patient with leishmaniasis at Centro Nacional de Microbiología (WHO Collaborating Centre for Leishmaniasis, Instituto de Salud Carlos IIII, Madrid, Spain). Total DNA was used for short-read whole-genome sequencing at the Centro Nacional de Análisis Genómico (CNAG-CRG) using the Illumina HiSeq platform, generating paired-end reads of 100 bp in length. A total of 38,710,210 reads were obtained, and they are provided in this dataset (LiL1_1.fastq and LiL1_2.fastq)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Leishmania infantum (strain LLM-2410): Illumina sequencing reads and genomic pseudo-assembly [Dataset]

  • Requena, José María
  • González de la Fuente, Sandra
The reads were aligned against the L. infantum (JPCM5 strain) reference genome [1] with the BWA-MEM software [2], using default parameters, and post-processed with Picard tools (https://broadinstitute.github.io/picard/). Variant discovery and genotyping were performed using the Genome Analysis Toolkit (GATK) [3]. Finally, a reference-guided consensus genome (pseudo-assembly) was then generated by mapping the variants to the reference genome (JPCM5 strain) using bcftools consensus [4]. Regions with zero coverage were subsequently masked using bedtools maskfasta [5], and their positions in the pseudo-assemblies were marked by N. A Fasta file with the sequence of the 36 chromosomes is provided (LiL9_consensus_DEF.fasta)., This strain (MHOM/ES/2018/LLM-2410) was isolated from a patient with leishmaniasis at Centro Nacional de Microbiología (WHO Collaborating Centre for Leishmaniasis, Instituto de Salud Carlos IIII, Madrid, Spain). Total DNA was used for short-read whole-genome sequencing at the Centro Nacional de Análisis Genómico (CNAG-CRG) using the Illumina HiSeq platform, generating paired-end reads of 100 bp in length. A total of 42,436,490 reads were obtained, and they are provided in this dataset (LiL9_1.fastq and LiL9_2.fastq)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Leishmania infantum (strain LLM-2407): Illumina sequencing reads and genomic pseudo-assembly [dataset]

  • Requena, José María
  • González de la Fuente, Sandra
The reads were aligned against the L. infantum (JPCM5 strain) reference genome [1] with the BWA-MEM software [2], using default parameters, and post-processed with Picard tools (https://broadinstitute.github.io/picard/). Variant discovery and genotyping were performed using the Genome Analysis Toolkit (GATK) [3]. Finally, a reference-guided consensus genome (pseudo-assembly) was then generated by mapping the variants to the reference genome (JPCM5 strain) using bcftools consensus [4]. Regions with zero coverage were subsequently masked using bedtools maskfasta [5], and their positions in the pseudo-assemblies were marked by N. A Fasta file with the sequence of the 36 chromosomes is provided (LiL4_consensus_DEF.fasta)., This strain (MHOM/ES/2018/LLM-2407) was isolated from a patient with leishmaniasis at Centro Nacional de Microbiología (WHO Collaborating Centre for Leishmaniasis, Instituto de Salud Carlos IIII, Madrid, Spain). Total DNA was used for short-read whole-genome sequencing at the Centro Nacional de Análisis Genómico (CNAG-CRG) using the Illumina HiSeq platform, generating paired-end reads of 100 bp in length. A total of 40,373,758 reads were obtained, and they are provided in this dataset (LiL4_1.fastq and LiL4_2.fastq)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Birds and bats differ in pest control pathways in fruit orchards: intraguild and direct predation

  • Jiménez-Albarral, José Javier
  • García, Daniel
  • Miñarro, Marcos
  • Hambäck, P. A.
Repository contains all data and code related to the work "Birds and bats differ in pest control pathways in fruit orchards: intraguild and direct predation"., Diet and abundance data for bird, bat and spider species in both apple and blueberry crops, as well as a bird traits database. Six R-scripts to follow the workflow from this data to build the tri-trophic networks and reproduce the analyses. Please see the Read_me file for further details., Ministerio de Ciencia, Innovación y Universidades BATBIRDFRUIT E-PID2020-120239RR-100, Gobierno del Principado de Asturias MONMAP MRR/PA-24-BIODIVERSIDAD-BIO02, Carl Tryggers stiftelse för vetenskaplig forskning, Ministerio de Ciencia, Innovación y Universidades FPI fellowship PRE2021-096887, Ministerio de Ciencia, Innovación y Universidades Juan de la Cierva Incorporación IJC2020-043765-I, Ministerio de Ciencia, Innovación y Universidades Ramon y Cajal RYC2024-048721-I, Israel Academy of Sciences and Humanities Higher Education Excellence Fellowship Program for International Postdoctoral Researchers, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset, code, and figure outputs for “What controls maximum injection-induced earthquake magnitude?”

  • Sachdeva, Sanchit
  • Kivi, Iman Rahimzadeh
  • Mukuhira, Yusuke
  • Vilarrasa, Víctor
[Description of methods used for collection or generation of data] Selected variables from the open-access GEoREST database were characterized, and rock names were standardized into 12 categories. Missing values were filled using literature values, deterministic calculations, and random-forest regression. Moment_Max was neither imputed nor used for imputation. Two LightGBM models were compared: an injection-only model and a full 12-feature model. Data were divided into 90% training and 10% testing subsets. Predictors were normalized from 0 to 1 using training-set ranges only., [Description of data processing and preparation] 1. Select and filter the GEoREST variables. 2. Fill supported literature values. 3. Calculate deterministic elastic and stress properties. 4. Impute remaining eligible values using random forests. 5. Merge the completed data and train the LightGBM models. Excel colours show provenance: white = original, yellow = literature, orange = random forest, and green = deterministic. Full processing details are provided in the scripts., [Codebooks or data dictionaries] This README documents the final variables. The original GEoREST workbook and Kivi et al. (2023) provide the source-variable definitions., Fluid injection into the subsurface for energy and resource development has led to increased seismic activity in recent years. Understanding the key factors governing maximum induced earthquake magnitude remains critical for their improved prediction and risk assessment. In this study, we apply a machine-learning model using the LightGBM algorithm to a global induced seismicity database spanning multiple geoenergy applications and settings to identify major factors associated with maximum injection-induced moment magnitude. We find that incorporating operational parameters, site characteristics, and host rock properties as input variables, compared to only operational parameters, significantly increases the predictive model accuracy. Cumulative injected fluid volume and injection rate impose first-order controls on seismic magnitude, while rock porosity, permeability, pore pressure, and in-situ stress field are found to play important secondary roles. These results highlight the importance of physical site characteristics beyond injection parameters in enriching magnitude-scaling relations and developing more reliable, physics-based seismicity forecasting and risk mitigation strategies., - The authors acknowledge support for data collection from the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program through the starting grant GEoREST under grant agreement no. 801809. - S.S. and V.V. acknowledge funding from the European Research Council through the Horizon Europe Proof-of-Concept project NOSHAKE, Grant Agreement No. 101248689. - I.R.K. acknowledges funding from MICIU/AEI/10.13039/501100011033 and the European Social Fund Plus (FSE+) through the Ramón y Cajal fellowship RYC2024-048711-I. - IMEDEA is a María de Maeztu Excellence Unit supported by Grant CEX2021-001198, funded by MICIU/AEI/10.13039/501100011033., With funding from the Spanish government through the "Maria de Maeztu Centre of Excellence" accreditation (CEX2021-001198)., File list Main files - README.md: workflow guide. - README_DATASETS.txt: dataset metadata. - requirements.txt: Python dependencies. - rf_script.py: random-forest imputation. - principal_stress_rf_script.py: principal-stress imputation. - final_dataset_script.py: final data merge and deterministic recalculation. - lightgbm_base_script.py: baseline LightGBM workflow. - lightgbm_normalization_script.py: normalized LightGBM workflow and figures. 01_Data_Curation - GEoREST_induced_seismicity_database_v20.11.2022.xlsx/.csv: source dataset. - DataCuration.xlsx: selected, standardized, literature-filled, and deterministic data. - Literature/RockProperties_4.png to RockProperties_8.png: literature tables used for filling rock properties. 02_RF_Imputation - RF_Datacurated.xlsx: random-forest-imputed data. - Audit_Outputs/principal_stress_values.csv: imputed principal stresses. - Audit_Outputs/principal_stress_validation.csv: stress-imputation validation. 03_Model_Training - Final_Imputed_Dataset.xlsx/.csv: final model input. - Previous_Baseline/Mean_RockSiteInjection.xlsx: earlier comparison dataset. - Results/model_comparison.csv: model-performance summary. - Results/new_v2_all_row_predictions.csv: model predictions. - Results/normalization_ranges.csv: training-set normalization ranges. - Results/normalized_labelled_model_inputs.csv: normalized model inputs. - Results/comparison_report.json: model settings and validation report. - Results/LightGBM_V2_TestV1_model.txt: trained LightGBM model. - Figures/F10.png, F21.jpg, F31.png, and F32.png: manuscript figures., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Aging-Associated Hearing Loss in IGF-1-Deficient Mice Is Linked to Gut Microbiota Remodeling and Systemic Inflammation [Dataset]

  • García Montoya, Carmen
  • Beni-Ledesma, Judith
  • López, Iciar P.
  • Zubeldia, José M.
  • García Pichel, José
  • Aburto, María R.
  • Murillo-Cuesta, Silvia
  • Varela-Nieto, Isabel
MCIN PID2020-115274RB-I00 and PID2023-147347OB-I00 (to S.M.-C. and I.V.-N.) MCIN PID2021-127860OB-I00 and PID2024-156098OB-I00 (to J.G.P.) Fundación Rioja Salud (Gobierno de La Rioja, Spain), co-funded by the ERDF/ESF, FEDER011_2024/ID-1813 (to J.G.P.) MCIN PRE2021-101114 (predoctoral contract to C.G.-M.) Fundación Científica AECC PRDLR258489BENI (predoctoral fellowship to J.B.-L.) European Research Council (ERC) Starting Grant RADIOGUT (Grant Agreement No. 101040951) and SFI/IRC Pathway Award 21/PATH-S/9424 (to M.R.A.), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supporting information Past and Future Shifts in Marine Species Distributions Across Two South American Large Marine Ecosystems [Dataset]

  • Bas, Maria
  • Diéguez Díaz, Sofía
  • Ouled-Cheikh, Jazel
  • Coll, Marta
This work was supported by MCIN/AEI/10.13039/501100011033 and NextGenerationEU/PRTR (Grant FJC2020-043762-I), Universitat de Barcelona (Grant PREDOCS-UB 2021), Ministerio de Ciencia, Innovación y Universidades (Grants PID2020-118097RB-I00, PID2024-162762OB-I00 and FCT-25-22426), Agència de Gestió d'Ajuts Universitaris i de Recerca (Grant 2021 SGR 00435), Ministerio para la Transición Ecológica y el Reto Demográfico and European Comission's Horizon Europe Research and Innovation (Grant 101129751), This work contributes to the Institut de Ciències del Mar "Severo Ochoa Centre of Excellence" accreditation CEX2024-001494-S funded by AEI 10.13039/501100011033 of the Spanish Ministry of Science and Innovation, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Data from: Trait-dependent time lags amid global change in marine observed and dark diversity on the Dogger Bank (North Sea)

  • Trindade, Diego P. F.
  • Knorrn, Alexander H.
  • Kreitsberg, Randel
  • Fujinuma, Junichi
  • Carmona, Carlos P.
  • Pärtel, Meelis
  • Sonnewald, Moritz
Understanding delayed biodiversity responses to global changes is crucial for anticipating future ecosystem dynamics and informing conservation. Here, we analysed a 32-year time series of benthic megafauna from the North Sea (Dogger Bank) to assess extinction debt and immigration credit using a probabilistic species pool framework. Within this framework, we generated suitability estimates for both observed diversity (i.e., species locally present) and dark diversity –the set of suitable but locally absent species. We defined extinction debt as species persisting locally under declining suitability and immigration credit as suitable species remaining in dark diversity over time. We evaluated these dynamics across 101 epibenthic species (from demersal fishes to macroinvertebrates) and tested their association with sea warming and species traits such as body size and motility. Despite no net change in species number, the suitability of observed diversity decreased over time, indicating extinction debt. At the species level, 72% of species exhibited time-lagged responses, with large-bodied and motile species being more often in extinction debt, whereas smaller and less motile species were more often in immigration credit. Consequently, in relation to temperature change, the North Sea’s species pool is slowly shifting toward smaller-bodied and less motile taxa, with several cold-adapted and commercially important species in extinction debt. These delayed responses and potential compositional shifts may weaken trophic interactions and affect ecosystem resilience. As marine systems experience increased warming, integrating trait-based approaches and time-lag responses within the species pool framework can offer early warnings of biodiversity reorganization and, therefore, windows of opportunity for conservation., Estonian Research Council: PUTJD1228 Estonian Research Council: PRG1065 Estonian Research Council: PRG2142 Estonian Research Council: PSG653 Estonian Research Council: PRG3127 Estonian Research Council: PRG3060 Ministry of Education and Research: TK200 Ministerio de Ciencia, Innovación y Universidades: ATR2024-154934, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Experimental data of manuscript From seaweed biorefinery residues to functional films: how H₂O₂/UV-assisted pigment removal reshapes polymer networks and material performance [DATASET]

  • Bojorges, Hylenne
  • Correa, Yubexi
  • Martínez Sanz, Marta
  • López-Rubio, Amparo
  • Fabra, María José
Seaweed biorefinery residues are often regarded as cellulose-rich side streams; however, their conversion into functional films depends on how extraction and post-treatment steps preserve the residual polymer matrix. This study evaluated H₂O₂/UV-assisted pigment removal as both an optical-upgrading strategy and a matrix-modifying treatment for residue-based films. Solid residues remaining after furcellaran extraction from Furcellaria lumbricalis, alginate extraction from Saccharina latissima, and protein extraction from Ulva lactuca were processed by extrusion and hot pressing before and after pigment removal. The materials were characterized through compositional, spectroscopic, morphological, scattering, thermal, optical, mechanical, water-affinity, and barrier analyses. All untreated residues formed self-supporting films, but performance was strongly residue-specific. Furcellaria lumbricalis residues yielded the most cohesive films, with the highest tensile strength (8.0 ± 0.5 MPa), lowest water vapor permeability (2.4 ± 0.1 × 10⁻¹³ kg·m·Pa⁻¹·s⁻¹·m⁻²), low water uptake (12.1 ± 1.2%), and effective light shielding. Saccharina latissima residues produced more extensible but weaker films, whereas Ulva lactuca films showed higher water affinity and permeability. Pigment removal improved whiteness, but its functional impact depended on matrix architecture. Treated Saccharina latissima failed to form a continuous film, while treated Ulva lactuca showed the highest permeability and water uptake. These findings indicate that H₂O₂/UV-assisted pigment removal should not be regarded only as an optical treatment, since its impact depends strongly on the organization and composition of the residual polymer matrix: when cohesive protein-polysaccharide domains were preserved, film integrity and water resistance were maintained; when these domains were depleted, processability and barrier performance deteriorated. The results provide a structure-function basis for selecting seaweed biorefinery residues as sustainable film-forming matrices with packaging-relevant functionality., Data collection was supported by Spanish national and regional funding (MCIN/AEI/10.13039/501100011033: PID2022-138328OB-C21, PCI2024-153420; European Union's: Sustainable Blue Economy Partnership (SBEP) SBEP2023-39, PRIMA Programme PCI2024-153409, and Severo Ochoa Centre of Excellence: CEX2021-001189-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

XP-TEAL. Balmer lines in open clusters : J/A+A/711/A215 [Dataset]

  • Carrasco, J. M.
  • Weiler, Michael
  • Malhotra, Sagar
  • Anders, Friedrich
  • Jordi, Carme
  • Masana, Eduard
  • Castañeda, J.
  • Boix, Fabià
In table1.dat, colour excess and interstellar absorptions are presented for clusters included Hunt & Reffert, 2023A&A...673A.114H, Cat. J/A+A/673/114. table2.dat includes the analysis of the Balmer lines of members in clusters extracted from table1. table3.dat includes the mastercurves used to estimate the BP-RP colour excesses included in table1 for a given cluster., The third Gaia data release (Gaia DR3) includes blue and red low-resolution spectrophotometry for more than 200 million sources. These Gaia XP spectra are represented by sets of coefficients multiplying linear combinations of basis functions related to Hermite functions. In a previous work we introduced a method that maximally exploits the information encoded in the Gaia spectrophotometric coefficients in order to identify absorption and emission lines. Our aim is to detect hydrogen Balmer emission and absorption lines in stars belonging to open clusters included in the released Gaia DR3 blue and red spectrophotometry and characterise the Balmer line strengths as a function of colour. We refine our XP Tool for Emission and Absorption Lines (XP-TEAL) based on the analysis of the derivatives of the spectral coefficients to analyse hydrogen Balmer lines in the Gaia DR3 XP spectra using the derivatives of the internal Gaia DR3 XP spectra. We test our results using stars in open clusters, considering both absorption and emission features. The analysis of the hydrogen lines in spectra of open cluster stars allows us to assess the performance and limitations of the method. We find an empirical dependence of the absorption-line equivalent widths on the intrinsic colour of the stars that allows us to derive precise colour excesses caused by interstellar extinction. We also identified 1256 stars with emission lines (356 of them unknown in the literature). We successfully tested our XP-TEAL code on stars belonging to clusters and make both the source code and the online version available to the community. Despite the low resolution of Gaia spectrophotometry, our code has proven to be able to extract useful line information from it., From J. M. Carrasco, carrasco(at)fqa.ub.edu This work was (partially) supported by the Spanish MICIN/AEI/10.13039/501100011033 and by 'ERDF A way of making Europe' by the 'European Union' through grant PID2021-122842OB-C21 and PID2024-157964OB-C21, and the Institute of Cosmos Sciences University of Barcelona (ICCUB, Unidad de Excelencia 'Maria de Maeztu') through grant CEX2024-001451-M and the project 2021-SGR-00679 GRC de l'Agencia de Gestio d'Ajuts Universitaris i de Recerca (Generalitat de Catalunya). This work was partially supported by the OCRE awarded project Galactic Research in Cloud Services (Galactic RainCloudS). OCRE receives funding from the European Union Horizon 2020 research and innovation programme under grant agreement no. 824079. This work has made use of data from the European Space Agency (ESA) mission Gaia, processed by the Gaia Data Processing and Analysis Consortium (DPAC). Funding for the DPAC has been provided by national institutions, in particular the institutions participating in the Gaia Multilateral Agreement. This research has made use of the SIMBAD database, operated at CDS, Strasbourg, France. This research has made use of the TOPCAT and STILTS tools (Taylor 2005). We also thank R. Sordo for her insightful comments on the manuscript, which helped improve the paper., With funding from the Spanish government through the "María de Maeztu Unit of Excellence" accreditation (CEX2024-001451-M), Peer reviewed
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Datos de investigación Set de datos (Dataset)

Dataset of the work “Simultaneous UV/vis Absorption in Parallel Configuration, Photoluminescence and Raman Spectroelectrochemistry”

  • Olmo Alonso, Fabiola
  • Pérez Estébanez, Martín
  • Heras Vidaurre, Aránzazu
  • Campo García, Francisco Javier del
  • Colina Santamaría, Álvaro
Analytical Chemistry is the science of chemical measurements that seeks to acquire the most comprehensive information about a chemical system. Recent advances in technology have facilitated the development of new combined analytical techniques capable of supplying analytical signals of different natures. These signals subsequently provide diverse information related to specific chemical reactions. This technical note proposes a new combination of three different spectroscopic techniques (UV/vis absorption spectroscopy in a parallel configuration, photoluminescence and Raman spectroscopy) with electrochemistry. To illustrate the capabilities of this new technique, two chemical systems (tris(2,2' bipyridine)ruthenium(II) and ofloxacin) were selected. A comparison of the behavior of the two molecules during the electrode process demonstrates the advantages of obtaining several signals simultaneously in a single experiment., Open Access funding provided thanks to the CRUE-CSIC agreement with American Chemical Society (ACS). Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación MCIN/AEI/10.13039/501100011033 and FEDER, UE (Grant numbers: PID2020-113154RB-C21, PID2020-113154RB-C22, PID2023-149188OB-I00, RED2022-134120-T, RED2024-153970-T), Junta de Castilla y León and European Regional Development Fund (Grant number: BU036P23) are gratefully acknowledged for funding this work. F.O. acknowledges Junta de Castilla y León and the European Social Fund for her postdoctoral contract. M.P.-E. acknowledges Junta de Castilla y León and the European Social Fund for his postdoctoral contract.
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Datos de investigación Set de datos (Dataset)

Gait Dataset of Healthy and Parkinson’s Individuals Captured With FMCW and CW-Doppler Radar Networks

  • Lopez Delgado, Ignacio Esteban
  • Villas Escobar, Marcos Enrique
  • Rueda, Javier
  • PÉREZ DEL OLMO, VALLE
  • Grandas Pérez, Francisco Javier
  • GRAJAL DE LA FUENTE, JESUS
The early detection of Parkinson's disease (PD) is critical to increase the quality of life of the patients. Its diagnosis is based on a clinical evaluation carried out by doctors. This evaluation analyzes various indicators, such as gait. However, clinical gait examinations present several lines of improvement regarding technology, reliability, rapidness and repetitiveness. Radar technology is a strong candidate to overcome the aforementioned difficulties, as it allows a contactless, rapid and reliable analysis. However, the most appropriate radar operational mode has not been determined yet. Contributions alternate operational modes without clear justification between Impulse-Radio Ultra-Wideband (IR-UWB), continuous-wave (CW), and Frequency-Modulated Continuous-Wave (FMCW). The implementation of IR-UWB systems has been constrained as a consequence of the RF spectrum regulations. In contrast, FMCW and CW systems comply with the current regulations, with numerous commercially-available devices at the 24-GHz and 60-GHz frequency bands. The data presented in this dataset was captured to compare FMCW and CW radar networks. Gait data was adquired from five healthy individuals and five patients with Parkinson's disease (PD), using infra-red Vicon cameras as ground-truth. This dataset is significant for the implementation of radar networks in clinical and domestic environments. This dataset contains approximately 100 gait minutes (approximately half of them from PD patients), and more than 2000 gait parameter estimates. Data is adquired with Vicon infra-red motion capture system, and CW and FMCW (with a bandiwdth B = 125 MHz) 24-GHz radar networks, offering a solid validation of both radar networks. The dataset contains both the raw signals and the gait parameter estimates. The infra-red camera system is equipped with six Vicon M2 cameras recording at 120 Hz. The camera signal is reconstructed with a Vicon Workstation model 460. Each radar network features two feet nodes facing one another separated 4.2 m and a torso node (height of 1 m). Their oprating frequency is configured to avoid interferences. The data is captured with the ADC Spectrum DN2.593-16, which is synchronized with the Vicon's station through a trigger signal. The gait of ten participants performing the following five clinical tests is recorded. The participants are divided into two groups according to their age and health condition: - Healthy and young participants (HC): 3 male and 2 female, aged between 21 and 29 years old without known motor disorders. - PD participants (PD): 4 male and 1 female, aged between 52 and 74 years old with Parkinson's Disease. Each subject's recordings are contained in a .zip file, encrypted with a password. To access the data, fill the "data_request_form" and send it to ie.lopez@upm.es. From 2027 on, data will be freely available. For more information, refer to the readme.txt file.
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Datos de investigación Set de datos (Dataset)

Temporal coherence of single photons emitted by hexagonal Boron Nitride defects at room temperature

  • Vidal Martínez-Pons, Juan Vicente
  • Antón Solanas, Carlos
<p>Color centers in hexagonal boron nitride (hBN) emerge as promising quantum light sources at room temperature, with potential applications in quantum communications, among others. The temporal coherence of emitted photons (i.e. their capacity to inter- fere and distribute photonic entanglement) is essential for many of these applications. Hence, it is crucial to study and determine the temporal coherence of this emission un- der different experimental conditions. In this work, we report the coherence time of the single photons emitted by an hBN defect in a nanocrystal at room temperature, mea- sured via Michelson interferometry. The visibility of this interference vanishes when the temporal delay between the interferometer arms is a few hundred femtoseconds, highlighting that the phonon dephasing processes are four orders of magnitude faster than the spontaneous decay time of the emitter. We also analyze the single photon characteristics of the emission via correlation measurements, defect blinking dynamics, and its Debye-Waller factor. Our room temperature results highlight the presence of a strong electron-phonon coupling, suggesting the need to work at cryogenic temperatures to enable quantum photonic applications based on photon interference.</p> <p>This dataset includes data from the experiments carried out to investigate the temporal coherence of hBN at room temperature, including photoluminescence (PL) spectra of several hBN emitters under different excitation conditions, time-resolved fluorescence decay, second-order correlation measurements, and Michelson interferometry of single photons. This data has been used to generae the figures included in the publication: "Temporal coherence of single photons emitted by hexagonal Boron Nitride defects at room temperature".</p> <p>1- "Basic Characterization": Data for the basic characterization of an hBN emitter at room temperature. Contains three subfolders:</p> <ul> <li>PL spectrum</li> <li>Saturation Curve</li> <li>Spontaneous decay (T1)</li> </ul> </p>2- "Second order correlation function": Includes data for the second-order correlation function (obtained via the Hanbury-Brown and Twiss experiment) of the same hBN emitter under different excitation powers with pulsed and continuous wave driving. Its is divided in the following subfolders:</p> <ul> <li>G2 CW</li> <li>G2 Pulsed</li> </ul> <p>3- "Michelson interferometry of an emitter": Includes data for the Michelson fringes (for different path delays) for the emisión of the same hBN emitter considering two filtering regions (ZPL and full spectrum). It is divided in the subfolders:</p> <ul> <li>Full spectrum</li> <li>ZPL</li> </ul> <p>4-"Michelson interferometry under different excitation conditions": Contains data of three hBN emitters (different from the one characterized in the rest of the dataset) excited with different laser wavelengths. This folder contains data of the PL spectra (for different excitation color) and the corresponding Michelson fringes (for different path delays). This folder is organized as follows:</p> <ul> <li>Emitter I</li> <ul> <li>Michelson Blue</li> <li>Michelson Green</li> <li>PL spectra</li> </ul> </ul> <ul> <li>Emitter II</li> <ul> <li>Michelson Blue</li> <li>Michelson Green</li> <li>PL spectra</li> </ul> </ul> <ul> <li>Emitter III</li> <ul> <li>Michelson Blue</li> <li>Michelson Red</li> <li>PL spectra</li> </ul> </ul> <p>Data from second-order correlation measurements and Michelson interferometry have been generated by the software Extensible Timetag Analyzer (https://timetag.github.io/).</p>
e-cienciaDatos, Repositorio de Datos del Consorcio Madroño
Datos de investigación Set de datos (Dataset)

Understanding self-assembly across scales in BODIPY derivatives: from supramolecular aggregation in solution to optical-waveguiding crystalline materials

  • González Sánchez, Marina
  • Garcia, Ana M.
  • Valera, Jorge S
  • Rodríguez Fernández-Pacheco, Ana María
  • Cabanillas Gonzalez, Juan
  • Prieto Recio, Maria Pilar
<p>Molecular self-assembly constitutes a useful tool to construct discrete and functional nanostructures with well-defined properties. Nevertheless, understanding supramolecular order in solution and its transmission to the solid state for the same scaffold remains challenging and the impact of this transition in the properties of the resulting supramolecular architectures is still underexplored, thus limiting the application of self-assembly in fields like organic electronics. Herein we explore the supramolecular aggregation process of a chiral BODIPY derivative in solution, their features in solid state, and its potential application as optical waveguide. In solution, this derivative follows a time-dependent self-assembly process, ultimately leading to aggregates of increasing dimensionality with propensity to precipitate, from which a certain degree of crystallinity can be inferred. The subsequent formation of single crystals confirms the preservation of key supramolecular features from solution to the solid state. Notably, the one-centimeter-long crystals obtained present active optical waveguiding behavior in the NIR with a remarkable optical loss coefficient, the first optical loss reported for BODIPY crystals. These results highlight the value of studying self-assembly across different scales and demonstrate the potential of BODIPY-based systems for the development of optical waveguides with remarkable performance.</p> <p>The dataset id organized in three main folders, including all the spectroscopic, xrd and optical waveguiding measurements, provided in tabular data and images forms.</p>