Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 42
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Paving the way to modern growth, The Spanish Bourbon roads

  • García López, Miquel-Àngel|||0000-0002-0515-2922
  • Herranz-Loncán, Alfonso
  • Tassinari, Filippo
  • Viladecans Marsal, Elisabet|||0000-0003-3722-2371
This paper analyses the impact that Spanish road construction had on local population growth between 1787 and 1857. We find that the increase in market potential associated to road accessibility had a significant effect on local population growth. The impact was substantially higher on the municipalities that had a more diversified occupational structure. By contrast, the effect of the new network on population growth was negative in municipalities close but without direct access to the roads. We interpret these findings as evidence of a process of rural-to-rural migration due to the new roads.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A latent space-based multivariate capability index: A new paradigm for raw material supplier selection in industry 4.0

  • Borràs-Ferrís, Joan
  • Duchesne, Carl
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] We present a novel Latent Space-based Multivariate Capability Index (LSb-MCpk) aligned with the Quality by Design initiative and used as a criterion for ranking and selecting suppliers for a particular raw material used in a manufacturing process. The novelty of this new index is that, contrary to other multivariate capability indexes that are defined either in the raw material space or in the Critical Quality Attributes (CQAs) space of the product manufactured, this new LSb-MCpk is defined in the latent space connecting both spaces. This endows the new index with a clear advantage over classical ones as it quantifies the capacity of each raw material supplier of providing assurance of quality with a certain confidence level for the CQAs of the manufactured product before manufacturing a single unit of the product. All we need is a rich database with historical information of several raw material properties along with the CQAs. Besides, we present a novel methodology to carry out the diagnosis for assignable causes when a supplier does not score a good capability index. The proposed LSb-MCpk is based on Partial Least Squares (PLS) regression, and it is illustrated using data from both an industrial and a simulation study., This work was partially funded by the Valencian Regional Government: Consellería de Educacion, Universidades y Empleo (CIAICO/ 2023/189), the Spanish Ministry of Economy, Industry and Competitiveness (DPI2017-82896-C2-1-R), and the European Social Fund (ACIF/ 2018/165).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Protein adsorption/desorption dynamics on Ca-enriched titanium surfaces: biological implications

  • Romero-Gavilán, Francisco
  • Cerqueira, Andreia
  • Anitua, Eduardo
  • Tejero, Ricardo
  • García-Arnáez, Iñaki
  • Ozturan, Seda
  • Izquierdo, Raul
  • Azkargorta, Mikel
  • Elortza, Félix
  • Gurruchaga, Mariló
  • Goñi, Isabel
  • Suay, Julio
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
[EN] Calcium ions are used in the development of biomaterials for the promotion of coagulation, bone regeneration, and implant osseointegration. Upon implantation, the time-dependent release of calcium ions from titanium implant surfaces modifies the physicochemical characteristics at the implant-tissue interface and thus, the biological responses. The aim of this study is to examine how the dynamics of protein adsorption on these surfaces change over time. Titanium discs with and without Ca were incubated with human serum for 2 min, 180 min, and 960 min. The layer of proteins attached to the surface was characterised using nLC-MS/MS. The adsorption kinetics was different between materials, revealing an increased adsorption of proteins associated with coagulation and immune responses prior to Ca release. Implant-blood contact experiments confirmed the strong coagulatory effect for Ca surfaces. We employed primary human alveolar osteoblasts and THP-1 monocytes to study the osteogenic and inflammatory responses. In agreement with the proteomic results, Ca-enriched surfaces showed a significant initial inflammation that disappeared once the calcium was released. The distinct protein adsorption/desorption dynamics found in this work demonstrated to be useful to explain the differential biological responses between the titanium and Ca-ion modified implant surfaces., This work was supported by MINECO [MAT2017-86043-R; RTC-2017-6147-1], Generalitat Valenciana [GRISOLIAP/2018/091; APOSTD/2020/036, PROMETEO/2020/069], Universitat Jaume I under [ UJI-B2017-37], the University of the Basque Country under [GIU18/189] and Basque Government under [PRE_2017_2_0044]. The authors would like to thank Raquel Oliver, Jose Ortega and Iraide Escobes for their valuable technical assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of Functionalized Side-Chain Liquid CrystalMethacrylates Containing Nonmesogenic Units by DielectricSpectroscopy

  • Martinez-Felipe, Alfonso
  • Santonja Blasco, Laura
  • Badia, J.D.
  • Imrie, C.
  • Ribes-Greus, A.
[EN] The dielectric response of a series of side-chain liquid crystal copolymers, SCLCPs, the poly[6-(4'-methoxyazobenzene-4'-oxy)hexyl methacrylate]-co-poly[methyl methacrylate]s, MeOAzB/MMA copolymers, is presented in the frequency range f = 10(-2) to 107 Hz and over the temperature interval T = 150 to 120 degrees C. The relaxation spectra of these polymers have been studied in terms of the complex dielectric permittivity (epsilon' and epsilon '') and the dielectric loss tangent, tan(delta). The electric modulus, M*, has been also calculated. It is possible to distinguish two relaxations zones, one at low temperatures (including gamma and beta relaxations) and another at higher temperatures (including the alpha and beta 1 relaxations), all of them reported for liquid crystalline poly(methacrylate)s. The individual relaxations have been analyzed using Havriliak-Negami (HN) functions, and the effect of conductivity at high temperatures is subtracted. The thermal activation of the relaxations at low temperatures is studied using the Arrhenius equations as a function of copolymer composition, while the alpha and beta 1 relaxations are analyzed using Vogel-Tammann-Fulcher equations. The activation entropy has been also evaluated for all the relaxations through the Eyring equation. The temperature ranges, activation energies, and entropies of the relaxations at low temperatures (gamma and beta) are similar in the homopolymer and copolymers. However, the introduction of MMA units promotes variations in all the parameters related to the relaxations associated with the motions of the ester groups adjoining the polymer backbone. Specifically, a decrease is observed in the activation entropy values of the beta 1 relaxation, which suggests that the activation of the local motions of the side groups involves smaller cooperative regions in the copolymers with respect to the homopolymer. This fact may account for the extinction of the smectic behavior, together with the dilution of the anisotropic interactions between the mesogenic units on increasing MMA content. The study of this beta 1 relaxation can be then applied to anticipate the formation and stability of smectic phases in functionalized SCLCPs, by controlling the local mobility resulting in different mesogenic behavior., This paper is meant to be a tribute and recognition to the research activity of Professor Giulio Sarti. The authors would like to thank Dr. Victor Saenz de Juano for his advice during the discussion of the results and also the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, IT2009-0074, and ENE2011-28735-C02-01 and two FPI and FPU predoctoral grants, and the financial support of the Generalitat Valenciana, through the Grisolia and Forteza programs and the ACOMP/2011/189 program. UPV is also thanked for additional support through the PAID 05-09-4331 and PAID-06-11 programs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

New Results on the Mixed General Routing Problem

  • Corberán, Angel
  • Mejía, Gustavo
  • Sanchís Llopis, José María|||0000-0002-0039-8122
[EN] In this paper, we deal with the polyhedral description and the resolution of the Mixed General Routing Problem. This problem, in which the service activity occurs both at some of the nodes and at some of the arcs and edges of a mixed graph, contains a large number of important arc and node routing problems as special cases. Here, a large family of facet-defining inequalities, the Honeycomb inequalities, is described. Furthermore, a cutting-plane algorithm for this problem that incorporates new separation procedures for the K-C, Regular Path-Bridge, and Honeycomb inequalities is presented. Branch and bound is invoked when the final solution of the cutting-plane procedure is fractional. Extensive computational experiments over different sets of instances are included., The contribution by A. Corberán and J. M. Sanchis has been partially supported by the Ministerio de Ciencia y Tecnología of Spain (Ref: TIC2003-05982-C05-01) and by the AVCiT de la Generalitat Valenciana (Ref: GRUPOS03/189).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Monitoring holograms for therapeutic ultrasound using passive cavitation beamforming

  • Lamothe, Nathalie
  • Andrés-Bautista, Diana
  • Pineda-Pardo, J.A.
  • CARRIÓN GARCÍA, ALICIA|||0000-0002-0630-6065
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Jimenez, Noe|||0000-0002-6539-670X
[EN] Acoustic holograms can generate cavitation patterns of complex spatial distribution by shaping and steering the focal spot of therapeutic ultrasound systems. However, when monitoring these systems by passive cavitation detection, off-axis therapeutical targets and the receiver directivity may not be aligned. In this paper, we present passive cavitation beamforming to monitor a therapeutical ultrasound system using holograms targeted to arbitrary locations, in which both therapeutic and passive cavitation monitoring systems use 3D-printed acoustic lenses. The therapeutic system uses an acoustic hologram to focus the ultrasound beam on the target, which is off-axis. Then, a second lens is designed to beamform the cavitation signals which emerge from the therapeutic target, steering the directivity of the passive cavitation detector in the direction of the therapeutic focus and, in addition, compensating for skull aberrations. The system is experimentally tested with an ex-vivo macaque skull and a blood vessel phantom with microbubbles. In addition, results are compared with a standard confocal configuration and an off-axis configuration in the absence of the monitor lens. A parametric study is performed by varying the amplitude of the emitted signal and the impact on the behaviour of the microbubbles is analysed based on the cavitation index values. Results show that monitoring holograms align the passive cavitation detector response with the focal spot of the targeted therapeutic transducer. These holograms encode a fixed beamformer for cavitation signals in reception, increasing the sensitivity of cavitation emission at the target. In this way, cavitation doses can be used to locally monitor the cavitation activity of microbubbles, thus opening a new path to low-cost monitoring of therapeutic ultrasound systems., This research has been supported by the Ministerio Español de Ciencia e Innovación and the Ministerio de Universidades grants FJC2019-040453-I, RYC2021-034920-I, FPU19/00601 and Agencia Estatal de Investigación grants PID2022-142719OB-C21 and CNS2023-145707 funded by MCIN/AEI/10.13039/501100011033; Agència Valenciana de la Innovació grants INNVA2/2022/11 and INNEST/2022/345; Generalitat Valenciana grants EDGJID/2021/189, CIGE/2021/175, CIAICO/2023/052, CIPROM/2021/003, FDEGENT/2019/004 and IDIFEDER/2021/004.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modeling Physical Activity Profiles in COPD Patients: A Basis Expansion Approach to Variable Domain Functional Regression Models

  • Hernández-Amaro, Pavel
  • Durban, María
  • Esteban Gonzalez, Cristobal
  • Arostegui, Inmaculada
  • Aguilera-Morillo, M. Carmen|||0000-0003-1027-9773
[EN] Physical activity plays an important role in the well-being of patients with Chronic Obstructive Pulmonary Disease (COPD). The telEPOC program, developed at the Galdakao-Usansolo University Hospital (Vizcaya, Spain), provided a telemonitoring data set resulting in a variable domain functional data set. In this sense, the aim is to study the impact of physical activity (measured as daily steps collected in a time interval delimited by the patient's participation in the experiment) on the rate of hospitalizations. To address this challenge, a novel basis expansion approach is proposed to fit a variable-domain functional regression model, which assumes the functional nature of the covariate (daily steps) and incorporates the sample data into the model without alignment. This will enrich the interpretability of the model by incorporating the information provided by the domain through a two-dimensional regression coefficient. In addition, a penalized estimation of the model is proposed in terms of a 2D P-spline penalty, which allows considering different degree of smoothness for each dimension of the functional regression coefficient (anisotropic penalty). The performance of our methodology is also tested and compared with state-of-the-art methods by means of a simulation study. Software for our method can be found in the VDPO R package available in CRAN., This work is supported by the grants PID2022-137243OB-I00 from the Spanish Ministry of Science, Innovation and Universities MCIN/AEI/10.13039/501100011033 and by CIAICO/2023/189 from the Conselleria de Educacion, Universidades y Empleo de la Generalitat Valenciana. This support is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Zigzag inequalities:a new class of facet-inducing inequalities for Arc Routing Problems

  • Corberán, A.
  • Plana, I.
  • Sanchís Llopis, José María|||0000-0002-0039-8122
[EN] In this paper we introduce a new class of facet-inducing inequalities for the Windy Rural Postman Problem and the Windy General Routing Problem. These inequalities are called Zigzag inequalities because they cut off fractional solutions containing a zigzag associated with variables with 0.5 value. Two different types of inequalities, the Odd Zigzag and the Even Zigzag inequalities, are presented. Finally, their application to other known Arc Routing Problems is discussed., The authors wish to thank the Ministerio de Ciencia y Tecnología of Spain (project TIC2003-05982-C05-01) and the Generalitat Valenciana (Ref: GRUPOS03/189) their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nanoparticles of non-porphyrinic covalent organic frameworks as contrast agents for photoacoustic imaging

  • Pi-Martín, Irene
  • VIDAURRE-AGUT, CARLA
  • Rivero-Buceta, Eva María
  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • García-Garrigos, Juan José
  • Jimenez, Noe|||0000-0002-6539-670X
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • BOTELLA ASUNCION, PABLO|||0000-0003-2141-3069
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] Photoacoustic imaging (PAI) is an emerging biomedical modality offering non-invasive, high-resolution imaging with molecular contrast. Its effectiveness for molecular imaging is improved by using external contrast agents such as dyes and nanostructures, which enable targeted imaging, deeper tissue penetration, and enhanced diagnostic accuracy. However, the clinical translation of these agents has been hindered by limitations in biocompatibility, biodegradability, and functionalization versatility. In this study, two porphyrin-free nanoscale covalent organic frameworks (nCOFs), TAPB-PDA and LZU1, were evaluated as novel exogenous contrast agents for PAI. Their photoacoustic responses were systematically measured and compared with traditional contrast agents, such as gold nanoparticles (AuNPs) and ATTO532-labelled mesoporous silica nanoparticles. Experiments at 532 nm across a range of concentrations demonstrated strong photoacoustic signals from TAPB-PDA and LZU-1, with enhanced response at higher concentrations. Besides, both nCOFs also provided detectable signals at the NIR window at the lowest concentration, indicating a broad working range. A nonlinear model of the volume-integrated photoacoustic pressure is also provided. Furthermore, in vitro cytotoxicity assays indicated excellent nCOF biocompatibility, even at higher concentrations. Photostability tests under prolonged pulsed laser irradiation revealed that both nCOFs exhibit good resistance to photobleaching and partial signal recovery under intermittent excitation. Collectively, these findings highlight the potential of TAPB-PDA and LZU-1 nCOFs as biocompatible, biodegradable, and functionally versatile contrast agents for advanced photoacoustic imaging., This work has been supported by the Agencia Estatal de Investigación (AEI, projects PID2019111436RBC22 and PID2022142952OB-100), Generalitat Valenciana through the programs Equipamiento e Infraestructuras FEDER 2021-22 IDIFEDER/2021/004, and Programa de Garantía Juvenil I+D EDGJID/2021/189, and NextGenerationEU Recovery and Resilience Facility (RRF) through the PTI+ Global Health Platform of Spanish National Research Council (grant SGL2103023). N. Jiménez is grateful for financial support from the Spanish Ministry of Science, Innovation and Universities (MICIU) through grants Juan de la Cierva Incorporación , IJC2018- 037897-I, and Ramón y Cajal RYC2021-034920-I. A. Cebrecos is grateful for financial support from Universitat Politècnica de València through programs PAID-10-19, PAID-PD-22. Irene Pi is grateful for financial support from program CIACIF/2021/403 of Generalitat Valenciana. In addition, financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Análisis estructural de los productos derivados de cereales y su aplicación en la optimización de procesos y productos

  • Garzón Lloría, Raquel
[ES] La inspección visual es un parámetro de calidad que describe tanto el aspecto externo como la estructura interna en los productos derivados de cereales. El análisis digital de imagen (ADI) es una herramienta ampliamente utilizada en diversos campos para procesar y analizar los objetos que observamos visualmente. Sin embargo, a pesar de su potencial, ha sido escasamente explotado en el ámbito de alimentos. La estructura de la miga de los productos derivados de cereales es uno de los parámetros característicos del pan y en este contexto es fundamental realizar el seguimiento de los cambios estructurales que se producen durante el proceso o debido a las modificaciones en la formulación. Por ello, el objetivo principal de la presente tesis doctoral fue definir la interrelación entre la estructura y parámetros de calidad de masas y productos horneados, así como extender la utilidad del ADI y su uso para optimizar los procesos y las formulaciones en productos horneados. Para ello, en primer lugar, se establecieron las condiciones óptimas de captura y se estudió la forma de mejorar la detección de bordes. Posteriormente se evaluó el potencial del análisis de imagen para cuantificar los cambios estructurales ocurridos en la formación de geles de almidón en un analizador rápido de fuerza. Seguidamente, se estudió el impacto en la estructura de la adición o sustitución de distintos ingredientes o aditivos en panes con y sin gluten. Y finalmente se investigaron las posibles correlaciones entre los resultados obtenidos de la caracterización tecnológica (perfil de textura, estructura de la miga, humedad) frente a la percepción sensorial (propiedades del bolo, masticación y deglución). El ADI permitió cuantificar las diferentes estructuras obtenidas con los distintos almidones. Además, el estudio reveló las diferencias en el tiempo necesario para formar una estructura homogénea y bien distribuida, que fue dependiente del origen del almidón. La modificación de la formulación de panes con o sin gluten requirió de la adaptación del proceso y permitió obtener diferentes estructuras atendiendo a los ingredientes /aditivos estudiados. El ADI resultó ser una herramienta eficaz para detectar y cuantificar los cambios originados a nivel estructural, en masa y producto final. Además, los cambios cuantificados mediante ADI obtuvieron correlaciones estadísticamente significativas con varios de los parámetros estudiados de percepción sensorial, como son la adhesividad del bolo y el tiempo total para masticar y deglutir una muestra. Por lo tanto, el ADI resultó una herramienta suficientemente específica y no destructiva, que permitió caracterizar el impacto del cambio de la formulación en la distribución alveolar de panes con y sin gluten. Existiendo relación entre este y los parámetros utilizados habitualmente en la caracterización de productos derivados de cereales, así como con la percepción sensorial., [CA] La inspecció visual és un paràmetre de qualitat que descriu tant l'aspecte extern com l'estructura interna en els productes derivats de cereals. L'anàlisi digital d'imatge (ADI) és una eina àmpliament utilitzada en diversos camps per a processar i analitzar els objectes que observem visualment. No obstant això, malgrat el seu potencial, ha sigut escassament explotat en l'àmbit d'aliments. L'estructura de la molla dels productes derivats de cereals és un dels paràmetres característics del pa i en aquest context és fonamental realitzar el seguiment dels canvis estructurals que es produeixen durant el procés o a causa de les modificacions en la formulació. Per això, l'objectiu principal de la present tesi doctoral va ser definir la interrelació entre l'estructura i paràmetres de qualitat dels diferents tipus de masses i productes enfornats, així com estendre la utilitat de l'ADI i el seu ús per a optimitzar els processos i les formulacions en productes enfornats. Per a això, en primer lloc, es van establir les condicions òptimes de captura i es va estudiar la manera de millorar la detecció de les vores. Posteriorment es va avaluar el potencial de l'anàlisi d'imatge per a quantificar els canvis estructurals ocorreguts en la formació de gels de midó en un analitzador ràpid de força. Seguidament, es va estudiar l'impacte en l'estructura de l'addició o substitució de diferents ingredients o additius en pans amb glútens i sense glútens. I finalment es van investigar les possibles correlacions entre els resultats obtinguts de la caracterització tecnològica (perfil de textura, estructura de la molla, humitat) enfront de la percepció sensorial (propietats del bol, masticació i deglució). L'ADI va permetre quantificar les diferents estructures obtingudes amb els diferents midons. A més, l'estudi va revelar les diferències en el temps necessari per a formar una estructura homogènia i ben distribuïda, que fou dependent de l'origen del midó. La modificació de la formulació de pans amb gluten o sense va requerir de l'adaptació del procés i va permetre obtindre diferents estructures atesos els ingredients /additius estudiats. L'ADI va resultar ser una eina eficaç per a detectar i quantificar els canvis originats a l'entorn estructural, en massa i producte final. A més, els canvis quantificats mitjançant ADI van obtindre correlacions estadísticament significatives amb els diversos paràmetres estudiats de percepció sensorial, com són l'adhesivitat del bol i el temps total per a mastegar i deglutir una mostra. Per tant, l'ADI va resultar una eina prou específica i no destructiva, que va permetre caracteritzar l'impacte del canvi de la formulació en la distribució alveolar de pans amb glutens i sense. Tot i existint relació entre aquest i els paràmetres utilitzats habitualment en la caracterització de productes derivats de cereals, així com amb la percepció sensorial., [EN] Visual inspection is a quality parameter that describes both the external appearance as the internal structure in cereal-based products. Digital image analysis (DIA) is a tool widely used in several fields to process and analyse objects visually observed by the human eye. However, despite of its potential, it has been barely explored for food analysis purposes. Crumb structure in cereal-derived products is one of the most characteristic parameters in bread. Due to this, following up the structural changes caused by the process or by the formulation changes, is of fundamental importance. For that reason, the main target of this thesis was the definition of the relationship between the structure and the quality parameters of dough and baked products. Moreover, extending the DIA utility and its use to improve process and mixes in baked products represented other main objective of this work. To do that, first, the optimal capture conditions were established and the way to improve the edge detection was studied. Afterwards, image analysis was evaluated to quantify the structural changes that happened during the starch gels formation in a fast force analyser. Then, the impact on the structure by adding or replacing different ingredients or additives in gluten-free breads was studied. Finally, the possible correlations between the results obtained from technological characterization (texture profile, crumb structure, moisture content) versus sensory perception (bolus properties, chewing and swallowing) were also investigated. DIA allowed the quantification of the different structures obtained from different starches. In addition, the study revealed the differences in time needed to form a homogeneous and well-distributed structure, which was dependent on the origin of the starch. Formulation modification in bread with or without gluten required a process adjustment that allowed to obtain different structures depending on the ingredients / additives studied. DIA has been proved to be an effective tool for detecting and quantify changes originated at the structural, dough and final product levels. In addition, the changes quantified by DIA obtained statistically significant correlations with several parameters studied for the sensory perception, such as bolus adhesion and total time to chew and swallow the sample. Therefore, DIA was a sufficiently specific and non-destructive tool, which allowed to characterize the impact of the formulation change on the bread cell distribution with and without gluten. There being a relationship between this, and the parameters usually used in cereal products characterization, as well as sensory perception., Authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness (Projects AGL2011-23802 and AGL2014-52928-C2-1-R), the European Regional Development Fund (FEDER) and Generalitat Valenciana (Projects Prometeo 2012/064 and Prometeo 2017/189), the Spanish Ministry of Science, Innovation and Universities (RTI2018-095919-B-C21), and the European Regional Development Fund. This work is based upon the work from COST Action 18101 SOURDOMICS – Sourdough biotechnology network towards novel, healthier and sustainable food and bioprocesses, the European Regional Development Fund and the joint project between research group from IATA-CSIC and the research groups of Nutriomics and CIDPRO from Tecnologico de Monterrey, Mexico.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Midiendo la elasticidad de tejidos biológicos empleando ultrasonidos

  • González-Mateo, Enrique
  • Rodríguez-Sendra, Josep|||0000-0001-5344-6602
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Jimenez, Noe|||0000-0002-6539-670X
[ES] La elastografía por ultrasonidos es una técnica de imagen médica que evalúa y mapea la elasticidad de los tejidos blandos. La elastografía proporciona información cualitativa y cuantitativa para diagnósticos, utilizando modos de imagen especializados que miden la rigidez en respuesta a fuerzas mecánicas. Esta modalidad presenta una alta sensibilidad y especificidad debido a que muchas patologías provocan grandes cambios en la rigidez de los tejidos, siendo útil en fibrosis hepática y detección y cuantificación de tumores como los de mama, tiroides o próstata. En este resumen presentamos los principios básicos de la elastografía por ultrasonidos, su relevancia clínica y revisamos las nuevas técnicas de imagen de mapas de elasticidad., [EN] Ultrasound elastography is a medical imaging technique that assesses and maps the elasticity of soft tissues. Elastography provides qualitative and quantitative diagnostic information using specialized imaging modes that measure stiffness in response to mechanical forces. This modality presents high sensitivity and specificity because many pathologies result in large changes in tissue stiffness, being particularly useful in liver fibrosis and detection and quantification of tumors such as breast, thyroid, or prostate. In this summary we present the basic principles of ultrasound elastography, its clinical relevance, and review the new elasticity mapping imaging techniques., Esta investigación ha sido apoyada por el Ministerio Español de Ciencia e Innovación y el Ministerio de Universidades a través de las Becas Ramón y Cajal RYC2021-034920-I. Agradecemos el apoyo financiero de la Agencia Estatal de Investigación (PID2019-111436RBC22 y PID2022-142719OB-C21 financiados por MCIN/ AEI/10.13039/501100011033), a la Agència Valenciana de la Innovació a través de los proyectos LITOVORTEX AP202108 y METASMART INNEST/2022/345 y a la Generalitat Valenciana a través de los programas Programa de Garantía Juvenil I+D EDGJID/2021/189 y el Programa Equipamiento e Infraestructuras FEDER 2021-22 IDIFEDER/2021/004.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A methodology to assess the energetic valorization of bio-based polymers from the packaging industry: pyrolysis of reprocessed polylactide

  • Badía Valiente, José David
  • Santonja Blasco, Laura
  • Martinez-Felipe, Alfonso
  • Ribes-Greus, A.|||0000-0003-2460-8291
The energetic valorization process of bio-based polymers is addressed in this study, taking polylactide (PLA) as model. The pyrolysis of virgin and multiple-injected PLA was simulated by means of multi-rate linear-non-isothermal thermogravimetric experiments. A complete methodology, involving control of gases, thermal stability and thermal decomposition kinetics was proposed. The release of gases was monitored by Evolved Gas Analysis of the fumes of pyrolysis, by in-line FT-IR, with the aid of 2D-correlation IR characterization. A novel model to establish the thermal stability of PLAs under any linear heating profile was proposed. A kinetic strategy was methodically applied to assess the thermal decomposition in terms of activation energy and kinetic model. It was found that the pyrolysis technologies for virgin PLA could be straightforwardly transferred for the valorization of its recyclates., The authors would like to acknowledge the Spanish Ministry of Science and Innovation for the financial support through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, ENE2011-28735-C02-01, IT-2009-0074, as well as for the pre-doctoral research position for L. Santonja-Blasco through the FPI program. The Spanish Ministry for Education is acknowledged for the concession of a pre-doctoral research position to J.D. Badia and A. Martinez-Felipe by means of the FPU program. The authors thank the financial support of the Generalitat Valenciana through the ACOMP/2011/189, the Grisolia research position for A. Martinez-Felipe, and for the Forteza technician position for J.D. Badia. Universitat Politecnica de Valencia (UPV, Spain) is thanked for additional support through the PAID 05-09-4331 and PAID 06-11-2037 projects. AIMPLAS is acknowledged for providing and processing the material. This paper is warmly dedicated to Gael Badia-Ombuena, in commemoration of his birth.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The role of crystalline, mobile amorphous and rigid amorphous fractions in the performance of recycled poly (ethylene terephthalate) (PET)

  • Badia, J.D.
  • Strömberg, Emma
  • Karlsson, Sigbritt
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The action of thermo-mechanical degradation induced by mechanical recycling of poly(ethylene terephthalate) was simulated by successive injection moulding cycles. Degradation reactions provoked chain scissions and a reduction in molar mass mainly driven by the reduction of diethyleneglycol to ethylene glycol units in the flexible domain of the PET backbone, and the formation of -OH terminated species with shorter chain length. The consequent microstructural changes were quantified taking into account a three-fraction model involving crystalline, mobile amorphous (MAF) and rigid amorphous fractions (RAF). A remarkable increase of RAF, to a detriment of MAF was observed, while the percentage of crystalline fraction remained nearly constant. A deeper analysis of the melting behaviour, the segmental dynamics around the glass-rubber relaxation, and the macroscopic mechanical performance, showed the role of each fraction leading to a loss of thermal, viscoelastic and mechanical features, particularly remarkable after the first processing cycle. © 2011 Elsevier Ltd. All rights reserved., The authors would like to acknowledge the Spanish Ministry of Science and Innovation for the financial support through the Research Project UPOVCE-3E-013 and for the funding of a pre-doctoral research position to J.D. Badía by means of the FPU program conceded by the Spanish Ministry for Education. Catalana de Polimers, S.A. and AIMPLAS are acknowledged for providing and processing the material, respectively. Mr. Peter Kaali is thanked for carrying out impact tests and Mrs. Sevil Atari Jabarzadeh for helping with SEM analysis. The authors thank the financial support of the Generalitat Valenciana through the ACOMP/2011/189 and the Gerónimo Forteza grant to J.D. Badía. Universitat Politècnica de València (UPV, Spain) is thanked for additional support through the PAID 05-09-4331 program and Royal Institute of Technology (KTH, Sweden) is thanked for additional economical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing Six Sigma with latent variable models: An industrial application of multivariate Six Sigma in the automotive sector

  • García-Carrión, Sergio
  • Pozueta, Lourdes
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] The traditional Six Sigma toolkit presents significant limitations for problem solving in Industry 4.0 settings. To address these limitations, it can be extended with latent variable-based multivariate statistical techniques such as Principal Component Analysis (PCA) and Partial Least Squares (PLS), in what has been referred to as multivariate Six Sigma. In this work, this approach is applied to address vibration performance issues in the caliper, a key component of a car's braking system. By appropriately integrating these techniques into the five-step DMAIC cycle, the root cause was satisfactorily identified, an effective corrective action was implemented, and the objectives of the project were successfully achieved. This case study provides further evidence of the practical utility of multivariate Six Sigma and demonstrates its potential for broader adoption in industrial projects., This work was supported by the Research and Development Support Program of the UPV (PAID-01-20) and by the Generalitat Valenciana (AICO/2021/111 and CIAICO/2023/189).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of texture TDS and flavour TDS tasks and of chocolate-chip biscuit characteristics on oral processing features

  • Rizo, A.
  • Jimenez-Pérez, I.
  • Fiszman, S.
  • Pérez-Soriano, P.
  • Tarrega, A.
  • Camacho-García, Andrés|||0000-0001-8542-4264
[EN] The objective of the present study was to investigate differences in oral activity when biscuits of the same type but with subtle composition differences are consumed and how performing a Temporal Dominance of Sensations (TDS) task modifies the way one eats. In addition, comparisons were made between performing a texture TDS (T-TDS) and a flavour TDS (F-TDS). Oral activity while eating biscuits with and without conducting a TDS task was recorded using a 3.dimensional motion capture system to monitor the evolution of jaw movements. The results showed that oral activity evolved over the consumption time, differed depending on the texture of the sample and was affected to a small but significant extent when a TDS task was performed simultaneously (the differences averaged < 4 cycles, 1 s in duration, 0.1 cycles/s in frequency, and 1 mm in lateral displacement). The biscuit samples were affected equally. Almost no differences were found on comparing oral activity during the execution of the T-TDS and the F-TDS tasks. Overall, the present results show differences in oral activity even for food products of the same category with subtle differences in composition. Performing TDS tasks (regardless of their modality) during sample consumption affected the total number, frequency and lateral amplitude of the chewing movements which should be taken into account for future research. However, these differences were small and affected both samples equally., The authors are grateful to the Spanish Ministry of the Economy and Competitiveness (AGL-2016-75403-R, Spain) and to the Regional Government of Valencia (Project Prometeo 2017/189, Spain) for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Liquid crystal polymers and ionomers for membrane applications

  • Martinez-Felipe, Alfonso
[EN] Transport phenomena through polymeric composite membranes depend on several complex factors, involving not only their chemical composition but also their microstructure. Due to the combination of mesomorphic and macromolecular behaviour, thermotropic liquid crystal polymers (LCP) may enhance the transport properties in membranes by improving parameters related to the order, orientation, connectivity and distribution of the different domains arising from phase separation. This paper provides an overview of some existing and potential applications of liquid crystals (LC) in polymeric membranes as effective structure-directing templates or as components providing a dynamic response to external stimuli. The first part is a description of the composition and phase behaviour of LCP containing ionic and ionogenic groups, the so-called liquid crystal ionomers (LCI). The second part is focused on the description of LCP and LCI used in transport applications, such as proton-conducting films in fuel cells, ionic polymer transducers and hydrogels. The paper highlights the relationships between the composition and the LC properties of the materials and their potential as membranes for ionic and solvent transport, with particular attention paid to covalently linked materials prepared by copolymerisation, due to their higher versatility and stability., The author would like to especially thank Professor Amparo Ribes-Greus, from Universitat Politecnica de Valencia, UPV, and Professor Corrie T. Imrie, from the University of Aberdeen, UoA, for their support during the discussion of this work, and also the researchers and students from the research group of Degradation and Recycling of Polymeric Materials in the Institute of Materials Technology (ITM) of UPV. Also acknowledged for their financial support are the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03 and UPOVCE-3E-013, the Ministry of Education and Science for the awarding of two FPU and FPI pre-doctoral grants, and the financial support of the Generalitat Valenciana, through the Grisolia and the ACOMP/2011/189 program. The UPV is also thanked for additional support through the PAID 05-09-4331 programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A comparison of two different formulations for Arc Routing Problems on Mixed graphs

  • Corberán, A.
  • Mota, E.
  • Sanchís Llopis, José María|||0000-0002-0039-8122
[EN] Arc routing problems on mixed graphs have been modelled in the literature either using just one variable per edge or associating to each edge two variables, each one representing its traversal in the corresponding direction. In this paper, and using the mixed general routing problem as an example, we compare theoretical and computationally both formulations as well as the lower bounds obtained from them using Linear Programming based methods. Extensive computational experiments, including some big and newly generated random instances, are presented., Authors want to thank two anonymous referees for their careful reading of the manuscript. Also we thank the support given by the Ministerio de Ciencia y Tecnología of Spain through Grant TIC2003-05982-C05-01 and by the Generalitat Valenciana (Grupos 03/189).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Methods to design and evaluate transcranial ultrasonic lenses using acoustic holography

  • Andrés, Diana
  • CARRIÓN GARCÍA, ALICIA|||0000-0002-0630-6065
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Jimenez, Noe|||0000-0002-6539-670X
[EN] Ultrasonic three-dimensional printed holograms are getting increasing interest for transcranial therapies since they can correct skull aberrations and, simultaneously, adapt the acoustic field to particular brain targets. However, evaluating the targeting performance of these systems requires the measurement of complex volumetric acoustic fields, which in many practical situations cannot be estimated by direct hydrophone measurements. In this work, we apply single-plane holographic measurement techniques to experimentally calibrate and measure the full volumetric field produced by holographic lenses. Two ex vivo test cases are presented, a four-foci lens and a preclinical case, both targeting through a macaque skull for potential applications in blood¿brain barrier opening (BBBO) studies. Time-reversal and angular spectrum projection methods are compared to direct experimental measurements. Results show that holographic projection methods can reconstruct the complex acoustic images produced by holographic lenses, matching direct measurements in all test cases. However, while direct measurements are restricted to transverse-field cross sections, holographic projection allows estimating the field on the whole targeting volume. In this way, the location and the full three-dimensional shape of all acoustic foci can be obtained. Furthermore, these techniques can provide the field at the surface of the lens to compare it to the design phase distribution. Using this procedure, complex volumetric acoustic fields can be reconstructed, saving significant measurement time and computational resources, and enabling an accurate characterization of phase plates and other holographic lens topologies., This research has been supported by the Ministerio Espanol de Ciencia e Innovacion and the Ministerio de Universidades through Grants Juan de la Cierva-Incorporacion IJC2018-037897-I, Juan de la Cierva-Formacion FJC2019-040453-I, Ramon y Cajal RYC2021-034920-I, Formacion de Profesorado Universitario FPU19/00601. We are grateful for financial support from Agencia Estatal de Investigacion (PID2019-111436RBC22 and PID2022-142719OB-C21 funded by MCIN/AEI/10.13039/501100011033) and to the Agencia Valenciana de la Innovacio through Grants INNVA1/2022/37,INNVA2/2022/11 and METAS-MART Project INNEST/2022/345, and by Generalitat Valenciana through the programs Programa de Garan-tia Juvenil I+D EDGJID/2021/189, the Project of Ayu-das Emergentes CIGE/2021/175, the Program Prometeo CIPROM/2021/003 and the Program Equipamiento e Infraestructuras FEDER 2021-22 IDIFEDER/2021/004. We acknowledge Jose & Aacute;ngel Pineda-Pardo and CINAC (HM Hospital Puerta del Sur) for their support in providing us with the macaque ex vivo skull, TAC and MRI medi-cal images and the postcomissural putament segmentation, and Jose Luis Alonso for technical support in the design of the experimental setup.r la Cierva-Formacion FJC2019-040453-I, Ramon y Cajal RYC2021-034920-I, Formacion de Profesorado Universitario FPU19/00601. We are grateful for finan-cial support from Agencia Estatal de Investigacion (PID2019-111436RBC22 and PID2022-142719OB-C21 funded by MCIN/AEI/10.13039/501100011033) and to the Agencia Valenciana de la Innovacio through Grants INNVA1/2022/37,INNVA2/2022/11 and METAS-MART Project INNEST/2022/345, and by Generalitat Valenciana through the programs Programa de Garan-tia Juvenil I+D EDGJID/2021/189, the Project of Ayu-das Emergentes CIGE/2021/175, the Program Prome-teo CIPROM/2021/003 and the Program Equipamiento e Infraestructuras FEDER 2021-22 IDIFEDER/2021/004. We acknowledge Jose Angel Pineda-Pardo and CINAC (HM Hospital Puerta del Sur) for their support in providing us with the macaque ex vivo skull, TAC and MRI medi-cal images and the postcomissural putament segmentation, and Jose Luis Alonso for technical support in the design of the experimental setup.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modelling and forecasting mortality in Spain

  • Debón, A.|||0000-0002-5116-289X
  • Montes, F.
  • Puig, F
[EN] Experience shows that static life tables overestimate death probabilities. As a consequence of this overestimation the premiums for annuities, pensions and life insurance are not what they actually should be, with negative effects for insurance companies or policy-holders. The reason for this overestimation is that static life tables, through being computed for a specific period of time, cannot take into account the decreasing mortality trend over time. Dynamic life tables overcome this problem by incorporating the influence of the calendar when graduating mortality. Recent papers on the topic look for the development of new methods to deal with this dynamism. Most methods used in dynamic tables are parametric, apply traditional mortality laws and then analyse the evolution of estimated parameters with time series techniques. Our contribution consists in extending and applying Lee–Carter methods to Spanish mortality data, exploring residuals and future trends., This work was partially supported by a grant from MEyC (Ministerio de Educacio´n y Ciencia, Spain, project MTM-2004-06231). The research of Francisco Montes has also been partially supported by a grant from DGITT (Direccio´ General d’Investigacio´ i Transfere`ncia Tecnolo`gica de la Generalitat Valenciana, project GRUPOS03/189).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solving the puzzle: Simulation of multivariate data with control over the structure of columns and rows using the two-sided orthogonal procrustes problem

  • Arteaga, Francisco
  • Camacho, Jose
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] Researchers interested in developing new multivariate statistical methods often need to be able to generate multivariate datasets with specific characteristics to test the effectiveness of their data analysis algorithms under specific conditions. In this paper, we present a family of methods for generating multivariate centred datasets by simultaneously controlling features of the cross-product matrices X inverted perpendicular X and XX inverted perpendicular. This provides an interesting trade-off to control for the variance structure in the data, important for the family of algorithms that operate on the data matrix, like, e.g., Principal Component Analysis, and control for the distances among objects, important for algorithms that operate on the distance matrix, like Multidimensional Scaling. The proposed methods form a general framework that can be understood as a jigsaw puzzle, joining pieces obtained from the spectral decomposition of a target covariance matrix and the singular value decomposition of a target data matrix. These methods have in common that they are derived from a two-sided orthogonal Procrustes problem., The authors declare the following financial interests/personal re-lationships which may be considered as potential competing interests: Alberto Ferrer reports financial support was provided by the Spanish State Agency of Research with grant ref. PID2020-119262RB-I00 and by the Generalitat Valenciana with grants refs. CIAICO/2021/111 and CIAICO/2023/189. The other authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Material valorisation of amorphous polylactide. Influence of thermo-mechanical degradation on the morphology, segmental dynamics, thermal and mechanical performance

  • Badía Valiente, José David
  • Strömberg, Emma
  • Karlsson, Sigbritt
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] This paper reports the effects of multiple mechanical recycling on the structure and properties of amorphous polylactide (PLA). The influence of the thermo-mechanical degradation induced by means of five successive injection cycles was initially addressed in terms of macroscopic mechanical properties and surface modification. A deeper inspection on the structure and morphology of PLA was associated to the thermal properties and viscoelastic behaviour. Although FT-IR analysis did not show significant changes in functional groups, a remarkable reduction in molar mass was found by viscometry. PLA remained amorphous throughout the reprocessing cycles, but the occurrence of a cold-crystallization during DSC and DMTA measurements, which enthalpy increased with each reprocessing step, suggested chain scission due to thermo-mechanical degradation. The effect of chain shortening on the glass-rubber relaxation studied by DMTA showed an increase in free volume affecting the segmental dynamics of PLA, particularly after the application of the second reprocessing step, in connection to the overall loss of performance showed by the remaining properties. © 2012 Elsevier Ltd. All rights reserved., The authors would like to acknowledge the Spanish Ministry of Science and Innovation for the financial support through the Research Project UPOVCE-3E-013 and for the funding of a predoctoral research position to J.D. Badia by means of the FPU program conceded by the Spanish Ministry for Education. The authors acknowledge the financial support of the Generalitat Valenciana through the ACOMP/2011/189. Universitat Politecnica de Valencia (UPV, Spain) is thanked for additional support through the PAID 05-09-4331 program and Royal institute of Technology (KTH, Sweden) is thanked for additional. Mr. Enrique Benavent at AIMPLAS is acknowledged for taking care of processing the material. Mr. Peter Kaali at KTH is thanked for carrying out impact tests and Mrs. Sevil Atari Jabarzadeh at KTH for helping with SEM analysis. Mrs. L. Santonja-Blasco at UPV is thanked for endless and enjoyable discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Properties of Malanga Flours and their Use in Pastes and Gluten Free Breads

  • Calle Domínguez, Jehannara
[ES] El uso de Colocasia esculenta (L.) Schott y Xanthosoma sagittifolium (L.) Schott como materia prima en forma de almidón o harina es una alternativa sostenible y nutritiva al trigo y otros granos. Esta alternativa permite a los agricultores minimizar las pérdidas después de su cosecha y garantizar la seguridad alimentaria ya que sus propiedades nutricionales, digestivas y saludables son reconocidas por la comunidad científica. Sin embargo, la información existente sobre este rizoma dirigida a su aplicación es bastante limitada. Esta tesis expone la caracterización funcional y tecnológica de los almidones obtenidos a partir de cormos y cormelos de Xanthosoma sagittifolium (L.) Schott. Asimismo, se evaluó tecnológicamente el efecto de la combinación de enzimas, hidrocoloides, almidón de patata, harina pregelatinizada sobre la harina de los cormelos de la Colocasia esculenta (L.) Schott en el desarrollo de un pan sin gluten. Además, se evaluaron las propiedades tecnológicas y digestivas de una fórmula básica para puré desarrollada a partir de harina de cormelos de Xanthosoma spp. y Colocasia spp. Además, la revisión bibliográfica realizada permitió poner en contexto los efectos saludables demostrados clínicamente de esta materia prima y sus componentes. Se demostró que existen diferencias significativas entre el almidón de cormos y cormelos de la misma especie. Se concluyó que la harina de Colocasia esculenta (L.) Schott es una buena opción para incrementar el valor nutricional de los panes sin gluten. Entre las estrategias probadas, el pan elaborado a partir de la mezcla con almidón de patata resultó la menos aconsejable. Además, todas las estrategias aplicadas originaron panes con menor índice glucémico que sus homólogos sin gluten reportados en otros estudios. Por primera vez, este trabajo recomienda el uso de harina de cormelos de Xanthosoma sagittifolium (L.) Schott y Colocasia esculenta (L.) Schott y para desarrollar purés con un valor nutricional agregado. La revisión bibliográfica realizada permitió recopilar los efectos demostrados clínicamente, concretamente antihiperglucémicos, antihepatotóxicos, antihipertensivos, hipoglucemiantes, anticancerosos, hipolipidémicos y prebióticos, entre otros, de los compuestos bioactivos presentes en esta planta., [CA] L'ús de Colocasia esculenta (L.) Schott i Xanthosoma sagittifolium (L.) Schott com a matèria primera en forma de midó o farina, és una alternativa per a minimitzar les perdues després de la seua collita i garantir la seguretat alimentària ja que les seues propietats nutricionals, digestives i saludables són reconegudes per la comunitat científica. Aquesta tesi exposa la caracterització funcional i tecnològica dels midons obtinguts a partir de corms i cormelos de Xanthosoma sagittifolium (L.) Schott. D'una banda és va avaluar tecnològicament l'efecte de la combinació d'enzims, hidrocol·loides, midó de creïlla, farina pregelatinitzada sobre la farina dels cormelos de la Colocasia esculenta (L.) Schott en el desenvolupament d'un pa sense gluten. D'altra banda, es van avaluar les propietats tecnològiques i digestives d'una fórmula bàsica per a puré desenvolupada a partir de farina de cormelos de Xanthosoma spp. i Colocasia spp. que es pot destinar a poblacions vulnerables amb afeccions gastrointestinals, diabètics, celíacs, entre altres. A més, es va realitzar una revisió on s'exposen els efectes saludables demostrats clínicament, dels seus components. Es va demostrar que existeixen diferències significatives entre el midó de corms i cormelos de la mateixa espècie. Per tant, es va concloure que la farina dels cormelos de la Colocasia esculenta (L.) Schott és una bona opció per a incrementar el valor nutricional dels pans sense glútens i entre les estratègies provades, el pa elaborat a partir de la mescla amb midó de creïlla va resultar la menys aconsellable, però tots van mostrar menor índex glucèmic que els seus homòlegs sense glútens reportats en altres estudis. A més, per primera vegada es va recomanar l'ús de farina cormelos de Xanthosoma sagittifolium (L.) Schott i Colocasia esculenta (L.) Schott per a desenvolupar purés amb un valor nutricional agregat. La revisió bibilogràfica realitza va permetre recopilar el efectes demostrats clínicament, en concret antihiperglucémic, antihepatotóxic, antihipertensiu, hipoglucemiant, anticancerós, hipolipidémic i prebiòtic, entre altres, dels compostos bioactius presents en aquest rizoma., [EN] The use of Colocasia esculenta (L.) Schott and Xanthosoma sagittifolium (L.) Schott as a raw material in form of starch or flour is a nutritious and sustainable alternative to wheat and other grains. This alternative allows farmers to minimize losses after harvest and guarantee food safety since its nutritional, digestive and healthy properties are recognized by the scientific community. Nevertheless, there is still scarce information about these rhizomes that limit their application. This thesis illuminates the functional and technological characterization of the starches obtained from corms and cormels of Xanthosoma sagittifolium (L.) Schott. Likewise, the effect of the combination of enzymes, hydrocolloids, potato starch, pregelatinized flour on Colocasia esculenta (L.) Schott cormels flour toward the development of a gluten-free bread was technologically evaluated. Furthermore, the technological and digestive properties of a basic formula for pastes developed from cormels flour of Xanthosoma sagittifolium (L.) Schott and Colocasia esculenta (L.) Schott was evaluated. In addition, a review was conducted and the health effects clinically demonstrated are exposed. It was shown that there are significant differences between the starch of corms and cormels of the same species. It was concluded that the flour from Colocasia esculenta (L.) Schott cormels is a good option to increase the nutritional value of gluten-free breads. Among the strategies tested, the bread made from mixtures with potato starch was the least desirable, but all strategies tested gave breads with lower glycemic index than gluten-free counterparts reported in other studies. For the first time, this works recommends the use of cormels flour from Xanthosoma sagittifolium (L.) Schott and Colocasia esculenta (L.) Schott was recommended to develop pastes to nutritional value to gluten-free products. In addition, the bibliographic review carried out allowed the compilation and analysis of the clinically demonstrated effects, especifically, antihyperglycemic, antihepatotoxic, antihypertensive, hypoglycemic, anti-cancer, hypolipidemic and prebiotic effects, among others, of the bioactive compounds present in these plants., Authors acknowledge the financial support of the Spanish Ministry of Science, Innovation and Universities (RTI2018-095919-B-C21), Spanish Ministry of Economy and Competitiveness (Project AGL2014-52928-C2-1-R), the European Regional Development Fund (FEDER) and Generalitat Valenciana (Project Prometeo 2017/189). Tropical Food Research Institute from Cuba provided the rhizomes.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A fiber-coupled laser diode design for reflection mode optical resolution photoacoustic microscopy

  • García-Garrigos, Juan José
  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • Navarro-Calvo, Javier Ángel|||0000-0002-2589-873X
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] Pulsed Laser Diodes (PLD) are compact and high pulse repetition rate laser sources that show a great potential for low-cost Optical Resolution Photoacoustic Microscopes (OR-PAM). Nevertheless, their non-uniform multimode laser beams are of low quality so that high lateral resolutions with tightly focused beams are difficult to realize at long focusing distances, as required for reflection mode OR-PAM devices of clinical application. A new strategy based on homogenizing and shaping the laser diode beam with a square-core multimode optical fiber allowed to attain competitive lateral resolutions while keeping one centimeter working distance. The theoretical expressions for the laser spot size, determining optical lateral resolution, and the depth of focus are also written for general multimode beams. An OR-PAM system was built in confocal reflection mode with a linear phased-array as the ultrasound receiver in order to test its performance, first, on a resolution test target and, afterwards, on ex vivo rabbit ears to show the system potential for subcutaneous imaging of blood vessels and hair follicles., We are grateful for financial support from Agencia Estatal de Investigacion, Spain (PID2019-111436RBC22/AEI/10.13039/50110001 1033), Generalitat Valenciana, Spain through the programs Equipamiento e Infraestructuras FEDER 2021-22 IDIFEDER/2021/004, Prometeo CIPROM/2021/003 and Programa de Garantia Juvenil I+D EDGJID/2021/189, Agencia Valenciana de la Innovacio INNVA2/2022/11 and INNVA1/2022/50, and the European Union - Next GenerationEU Programa Investigo INVEST/2022/171. A. Cebrecos is grateful for financial support from Universitat Politecnica de Valencia, Spain through pro-grams PAID-10-19 and Ayuda para potenciar la investigacion postdoc-toral de la UPV PAID-PD-22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Holographic Focused Ultrasound Hyperthermia System for Uniform Simultaneous Thermal Exposure of Multiple Tumor Spheroids

  • Andrés, Diana
  • Rivens, Ian
  • Mouratidis, Petros
  • Ter Haar, Gail
  • Jimenez, Noe|||0000-0002-6539-670X
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] Hyperthermia is currently used to treat cancer due to its ability to radio- and chemo-sensitize and to stimulate the immune response. While ultrasound is non-ionizing and can induce hyperthermia deep within the body non-invasively, achieving uniform and volumetric hyperthermia is challenging. This work presents a novel focused ultrasound hyperthermia system based on 3D-printed acoustic holograms combined with a high-intensity focused ultrasound (HIFU) transducer to produce a uniform iso-thermal dose in multiple targets. The system is designed with the aim of treating several 3D cell aggregates contained in an International Electrotechnical Commission (IEC) tissue-mimicking phantom with multiple wells, each holding a single tumor spheroid, with real-time temperature and thermal dose monitoring. System performance was validated using acoustic and thermal methods, ultimately yielding thermal doses in three wells that differed by less than 4%. The system was tested in vitro for delivery of thermal doses of 0-120 cumulative equivalent minutes at 43 °C (CEM43) to spheroids of U87-MG glioma cells. The effects of ultrasound-induced heating on the growth of these spheroids were compared with heating using a polymerase chain reaction (PCR) thermocycler. Results showed that exposing U87-MG spheroids to an ultrasound-induced thermal dose of 120 CEM43 shrank them by 15% and decreased their growth and metabolic activity more than seen in those exposed to a thermocycler-induced heating. This low-cost approach of modifying a HIFU transducer to deliver ultrasound hyperthermia opens new avenues for accurately controlling thermal dose delivery to complex therapeutic targets using tailored acoustic holograms. Spheroid data show that thermal and non-thermal mechanisms are implicated in the response of cancer cells to non-ablative ultrasound heating., This research has been supported by the Spanish Ministry of Science, Innovation and Universities (MICIU) through grants "Formacion de Profesorado Universitario" FPU19/00601 and EST22/00277, "Juan de la Cierva-Incorporacion", IJC2018-037897-I, and "Ramon y Cajal" RYC2021-034920-I. We are grateful for financial support from Agencia Estatal de Investigacion (PID2019-111436RBC22/AEI/10.13039/501100011033) and from Generalitat Valenciana through the programs Prometeo CIPROM/2021/003, Equipamiento e Infraestructuras FEDER 2021-22 IDIFEDER/2021/004, Programa de Garantia Juvenil I+D EDGJID/2021/189 and the European Union- Next GenerationEU Programa Investigo INVEST/2022/171. We thank also the Agencia Valencia de la Innovacio for their support through grants INNVA2/2022/11 and METASMART project INNEST/2022/345. Some UK funding was provided by the EPSRC (UKRI) network grant ThUNDDAR. Part of the activities here presented were developed in the framework of the EURAMET, European Association of National Metrology Institutes, 18HLT06 RaCHy Project that received funding from the EMPIR program, European Metrology Programme for Innovation and Research (funder ID: 10.13039/100014132) co-financed by the Participating States and from the European Union's Horizon 2020 research and innovation program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reprocessed polylactide: Studies of thermo-oxidative decomposition

  • Badía Valiente, José David
  • Santonja Blasco, Laura
  • Martinez-Felipe, Alfonso
  • Ribes-Greus, A.|||0000-0003-2460-8291
The combustion process of virgin and reprocessed polylactide (PLA) was simulated by multi-rate linear non-isothermal thermogravimetric experiments under O2. A complete methodology that accounted on the thermal stability and emission of gases was thoroughly developed. A new model, Thermal Decomposition Behavior, and novel parameters, the Zero-Decomposition Temperatures, were used to test the thermal stability of the materials under any linear heating rate. The release of gases was monitored by Evolved Gas Analysis with in-line FT-IR analysis. In addition, a kinetic analysis methodology that accounted for variable activation parameters showed that the decomposition process could be driven by the formation of bubbles in the melt. It was found that the combustion technologies for virgin PLA could be transferred for the energetic valorization of its recyclates. Combustion was pointed out as appropriate for the energetic valorization of PLA submitted to more than three successive reprocessing cycles, The authors would like to acknowledge the Spanish Ministry of Science and Innovation for the financial support through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, ENE2011-28735-C02-01, IT-2009-0074, as well as for the pre-doctoral research position for L. Santonja-Blasco through the FPI program. The Spanish Ministry for Education is acknowledged for the concession of a pre-doctoral research position to J.D. Badia and A. Martinez-Felipe by means of the FPU program. The authors thank the financial support of the Generalitat Valenciana through the ACOMP/2011/189, the Grisolia research position for A. Martinez-Felipe, and for the Forteza technician position. Universitat Politecnica de Valencia (UPV, Spain) is thanked for additional support through the PAID 05-09-4331 and PAID 06-11-2037 projects. AIMPLAS (Technological Institute of Plastic) is acknowledged for providing and processing the material.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Uso de subproductos de la industria agroalimentaria como fuente de fibra. Respuesta de los consumidores

  • Curutchet González, Ana
[ES] La investigación de la presente Tesis doctoral busca estudiar la respuesta del consumidor a productos enriquecidos en fibra mediante la incorporación de subproductos de la industria alimentaria.Se estudió el interés de los consumidores uruguayos en diferentes mejoras nutricionales, el tipo de elaboración y cómo ha cambiado en los últimos diez años. Los resultados muestran que la respuesta de los consumidores es distinta dependiendo del tipo de queso. Solo en el queso untable, hay interés en la reducción de grasa. Respecto a los cambios con el tiempo, se observó para el queso semi-blando, un aumento en el interés por la elaboración artesanal. Se estudió el uso de distintos subproductos como ingredientes en el enriquecimiento en fibra de productos de consumo habitual. Se trabajó con el descarte de la producción de jugo de arándanos. Este se transformó en una harina y se incorporó a la formulación de galletas. Las expectativas de los consumidores al observar la etiqueta de esta galleta fueron tan buenas como una galleta sin fibra. Sin embargo, cuando la probaron sin tener información les gustó menos que la galleta sin fibra, pero al conocer que era rica en fibra aumentó su aceptabilidad ligeramente. Por lo tanto, aunque les interesan las galletas ricas en fibra, no están dispuestos a comprometer aspectos hedónicos por atributos saludables. El segundo subproducto estudiado fue el generado durante la producción de jugo de manzana. La pulpa que se transformó en harina, se usó para el enriquecimiento en fibra de un bizcochuelo. Se estudió la respuesta de los consumidores al bizcochuelo enriquecido en fibra en presencia o no de la etiqueta con información "fuente de fibra" y "con fibra de manzana", comparativamente con un producto comercial sin fibra. Se evaluó la aceptabilidad y los motivos por los que lo compraría o no. Los resultados indican que la aceptabilidad del bizcochuelo enriquecido en fibra aumentó significativamente con la información, lo que indica que además de la declaración "fuente de fibra", la indicación del origen de la fibra "con fibra de manzana" aumenta la aceptabilidad que el consumidor percibe de estos productos. Como tercer subproducto se utilizó el residuo de la industria cervecera, BSG (brewery spent grain). Se desarrollaron tres productos (pan, pasta y leche chocolatada) enriquecidos con fibra mediante la adición de BSG. Se evaluó el impacto del enriquecimiento de la fibra en las características sensoriales, la aceptabilidad y la intención de compra de los consumidores y luego en las emociones que el producto transmitía. La incorporación de fibra en los tres productos tuvo impacto significativo en las características sensoriales. Estas afectaron de forma distinta a la aceptabilidad y a la intención de compra dependiendo del producto. En lo que respecta a las emociones, se puede percibir una ambivalencia según los diferentes productos enriquecidos dependiendo si la fibra es percibida o no. Cuando la detectan se sienten más confiados en consumir el producto y con menos culpa. Por lo tanto, las características sensoriales que el consumidor percibe asociado a la fibra puede, en algunos productos, aumentar la intención de compra del consumidor y hacerle sentir mejor.Se estudió el efecto de la forma de comunicación del enriquecimiento de BSG en la respuesta del consumidor a hamburguesas de carne y si dependía de la marca comercial. Se consideraron tres marcas (una líder, una de bajo precio y una artesanal) y utilizando su empaque original se diseñaron tres etiquetas incluyendo diferente tipo de información y un símbolo representando sustentabilidad. La marca fue el único factor estudiado que afectó la intención de compra y sin embargo el tipo de información no tuvo efecto. Por todo lo obtenido podemos decir que es posible utilizar subproductos de la industria alimentaria como ingredientes para enriquecer nutricionalmente otros alimentos., [CA] La investigació de la present Tesi doctoral busca estudiar la resposta del consumidor a productes enriquits en fibra per mitjà de la incorporació de subproductes de la indústria alimentaria.Se va estudiar l'interés dels consumidors uruguaians en diferents millores nutricionals, el tipus d'elaboració i com ha canviat en els últims deu anys. Els resultats mostren que la resposta dels consumidors és distinta depenent del tipus de formatge. Només en el formatge untable, hi ha interés en la reducció de greix. Respecte als canvis amb el temps, es va observar per al formatge semi-blando, un augment en l'interés per l'elaboració artesanal. Es va estudiar l'ús de distints subproductes com a ingredients en l'enriquiment en fibra de productes de consum habitual. Es va treballar amb el descart de la producció de suc de nabius. Este es va transformar en una farina i es va incorporar a la formulació de galletes. Les expectatives dels consumidors a l'observar l'etiqueta d'esta galleta van ser tan bones com una galleta sense fibra. No obstant això, quan la van provar sense tindre informació els va agradar menys que la galleta sense fibra, però al conéixer que era rica en fibra va augmentar la seua acceptabilitat lleugerament. Per tant, encara que els interessen les galletes riques en fibra, no estan disposats a comprometre aspectes hedònics per atributs saludables. El segon subproducte estudiat va ser el generat durant la producció de suc de poma. La polpa que es va transformar en farina, es va usar per a l'enriquiment en fibra d'un bizcochuelo. Es va estudiar la resposta dels consumidors al bizcochuelo enriquit en fibra en presència o no de l'etiqueta amb informació;"fuente de fibra"; "con fibra de manzana";, comparativament amb un producte comercial sense fibra. Es va avaluar l'acceptabilitat i els motius pels quals ho compraria o no. Els resultats indiquen que l'aceptab. Com a tercer subproducte es va utilitzar el residu de la indústria cervesera, BSG (brewery spent grauet) . Es van desenrotllar tres productes (pa, pasta i llet xocolatada) enriquits amb fibra per mitjà de l'addició de BSG. Es va avaluar l'impacte de l'enriquiment de la fibra en les característiques sensorials, l'acceptabilitat i la intenció de compra dels consumidors i després en les emocions que el producte transmetia. La incorporació de fibra en els tres productes va tindre impacte significatiu en les característiques sensorials. Estes van afectar de forma diferent de l'acceptabilitat i a la intenció de compra depenent del producte. Pel que fa a les emocions, es pot percebre una ambivalència segons els diferents productes enriquits depenent si la fibra és percebuda o no. Quan la detecten se senten més confiats a consumir el producte i amb menys culpa. Per tant, les característiques sensorials que el consumidor percep associat a la fibra pot, en alguns productes, augmentar la intenció de compra del consumidor i fer-li sentir mejor.Se va estudiar l'efecte de la forma de comunicació de l'enriquiment de BSG en la resposta del consumidor a hamburgueses de carn i si depenia de la marca comercial. Es van considerar tres marques (una líder, una de baix preu i una artesanal) i utilitzant el seu prestància original es van dissenyar tres etiquetes incloent diferent tipus d'informació i un símbol representant sustentabilidad. La marca va ser l'únic factor estudiat que va afectar la intenció de compra i no obstant això el tipus d'informació no va tindre efecte. Per tot allò que s'ha obtingut podem dir que és possible utilitzar subproductes de la indústria alimentària com a ingredients per a enriquir nutricionalment altres aliments., [EN] The main focus of this work is studying the consumer's response to fibre enriched products by incorporating by-products from the food industry. The interest of Uruguayan consumers in different nutritional improvements and the method of preparation was studied. In the last decade, products with extra benefits have become much more common in the market, and the variation of this interest in recement years was also studied. The results show that the response of consumers is different depending on the type of cheese. Only in spreadable cheese, there is a certain degree of interest only in the reduction of fat. Regarding the changes over time, an increase in interest in artisanal production was observed for semi-soft cheese. Contrary to expectations, there was no increase in consumer interest for any of the nutritional improvements. The use of different by-products as ingredients for the fibre enrichment of products of habitual consumption was studied. The first by-product used was the residue from the blueberry juice production. This was transformed into a flour and incorporated into the cookie. The hedonic consumer expectations for this cookie when looking at the label were as good as a non-fibre cookie. However, when they tasted it without information, they liked it less than the non-enriched cookie, although knowing that it was rich in fibre increased its acceptability slightly. Therefore, while consumers are interested in high fibre cookies, they are not willing to compromise hedonic aspects for healthy attributes. The second by-product studied was the one generated during the production of apple juice. This pulp that was transformed into flour and used for the fibre enrichment of a sponge cake. The response of consumers to the fibre enriched sponge cake was studied with and without information on the label ("source of fibre" and "with apple fibre") in comparison with a commercial product. Product's acceptability were studied. The results show that the acceptability of the fibre enriched sponge cake increased significantly with the information, indicating that in addition to the claim "source of fibre", knowing the of origin of the fibre "with apple fibre" increases the acceptability that the consumer perceives. The third by-product used was the residue from the brewing industry, BSG (brewery spent grain). Three different products were developed (bread, pasta and chocolate milk) enriched with fibre by adding BSG. First, the impact of fibre enrichment on sensory characteristics, acceptability and purchase intention of consumers was evaluated. Finally, the effect of the products on the emotions of the consumers was studied. The incorporation of fibre in the three products had a significant impact on the sensory characteristics. However, these affected acceptability and purchase intention differently depending on the product. Regarding emotions, an ambivalence can be perceived in what is generated by the different enriched products depending on whether the fibre is perceived or not. When they detect it, they feel more confident in consuming the product and with less guilt. Therefore, the sensory characteristics that the consumer perceives associated with fibre can, in some products, not only increase the consumer's purchase intention but also make them feel better. The effect of the way to communicate the BSG enrichment on the consumer's response to meat burgers, and whether it depended on the commercial brand was studied. Three brands were considered (one leading, one low-priced and one artisanal) and using their original packaging, three labels were designed including different types of ways of conveying the information and a symbol representing sustainability. The brand was the only factor studied that affected purchase intention, and the way used to convey the information had no effect. In conclusion, it is possible to use by-products from the food industry as ingredients to nutritionally enrich other foods., The financial support of Generalitat Valenciana (Project Prometeo 2017/189) and LATU, Uruguay for Arcia’s stay at IATA, are all gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Going from Digestion to Microstructure of Starch-Based Food Products: Understanding the Role of Polyphenols

  • Aleixandre Agustín, Andrea
[ES] Debido a la creciente importancia de la dieta en el manejo de la salud, sigue habiendo un gran interés en desentrañar como se procesan los alimentos en el sistema digestivo humano. La estructura de los alimentos puede influir significativamente en su procesamiento, afectando al rendimiento durante la alimentación y la digestión. Específicamente, la digestión de alimentos a base de carbohidratos requiere una mayor comprensión debido a su contribución a los niveles de glucosa en sangre. El conocimiento de la cinética de digestión del almidón contribuirá a diseñar alimentos a medida para controlar los niveles de glucosa posprandial. El objetivo de esta tesis doctoral fue adquirir una mejor comprensión del impacto de la microestructura en la digestión del almidón y cómo las enzimas digestivas podrían ser moduladas por compuestos fenólicos. Con ese propósito, se evaluó el papel de la estructura del pan en la masticación in vivo y la digestión in vitro. Posteriormente, se produjeron geles de almidón de diferentes fuentes y se digirieron en un sistema de digestión oro-gastro-intestinal in vitro para analizar el impacto de la microestructura del gel. Después de los estudios de microestructura en geles de almidón y pan, se exploraron diferentes ácidos fenólicos o extractos polifenólicos de algas como inhibidores de enzimas digestivas de almidón, y se evaluó la participación de la microestructura del gel de almidón en la digestión enzimática. La masticación y la textura del bolo de panes tostados de trigo se vio afectada por su diferente estructura, a pesar de que no se observaron diferencias en la percepción sensorial. El proceso de panificación también ofreció la posibilidad de modificar la estructura del pan. De hecho, la variación de la forma de la masa dio lugar a panes con diferentes propiedades estructurales y texturales de la miga. La digestión de los panes con diferente estructura de miga confirmó que se disgregaban de manera diferente, produciendo variaciones en la posterior digestibilidad del almidón. Una vez que se estableció la importancia de la microestructura de la miga en la digestión del almidón, se cambió el enfoque para enlazar la microestructura de los geles de almidón con su digestión in vitro. Los geles obtenidos con almidones de distintas fuentes botánicas mostraron diferente digestibilidad, lo que se relacionó con su microestructura, pero también con su contenido de amilosa. Considerando la acción de las enzimas digestivas (α-amilasa y α-glucosidasa) sobre la hidrólisis del almidón, se estudiaron diferentes compuestos fenólicos para comprender las interacciones entre los compuestos fenólicos y las enzimas o sustratos. La forma más eficaz de inhibir las enzimas era incubarlas con ácidos fenólicos. Se necesitó una mayor concentración del inhibidor cuando los compuestos fenólicos interactuaban previamente con el sustrato, debido a su retención dentro del gel de almidón. La estructura química de los ácidos fenólicos controlaba la inhibición de la enzima. Asimismo, los extractos fenólicos complejos, como los extraídos de las algas A. nodosum, podrían utilizarse para inhibir las enzimas digestivas, mostrando mayor efecto inhibidor cuando fueron previamente incubados con la enzima, debido a la existencia de complejos carbohidrato-polifenoles con sus diferentes capacidades inhibitorias. Además, los ácidos fenólicos afectaron las propiedades de pegado y, por lo tanto, a la estructura y textura de geles de almidón. Sin embargo, esos cambios no fueron suficientes para controlar la hidrólisis enzimática del almidón, que estaba relacionada con la estructura química de los ácidos fenólicos y sus propiedades. En general, la microestructura de la miga o del gel puede limitar la accesibilidad de las enzimas digestivas, lo que reduciría la hidrólisis del almidón. Además, la inclusión de ácidos fenólicos en alimentos a base de almidón podría ser la alternativa para reducir el grado de digestión del almidón al inhibir estas enzimas., [CA] A causa de la creixent importància de la dieta en el maneig de la salut, segueix sent de gran interès desentranyar com es processen els aliments en el sistema digestiu humà. L'estructura dels aliments pot influir significativament en el processament dels aliments, afectant al seu rendiment durant l'alimentació i la digestió. Específicament, la digestió d'aliments a base de carbohidrats requereix una major comprensió a conseqüència de la seua contribució als nivells de glucosa en sang. El coneixement de la cinètica de la digestió del midó contribuirà a dissenyar aliments a mesura per controlar els nivells de glucosa postprandial. L'objectiu d'aquesta tesi doctoral va ser adquirir una millor comprensió de l'impacte de la microestructura en la digestió del midó i com els enzims digestius podrien ser modulats per l'ús de compostos fenòlics. Amb aquest propòsit, es va avaluar el paper de l'estructura del pa en la masticació in vivo i la digestió in vitro. Posteriorment, es van produir gels de midó de diferents fonts i es van digerir en un sistema de digestió oro-gastrointestinal in vitro per analitzar l'impacte de la microestructura del gel. Després dels estudis de microestructura en gels de midó i pa, es van explorar diferents àcids fenòlics o extractes polifenòlics d'algues com inhibidors dels enzims digestius del midó, i es va avaluar la participació de la microestructura del gel de midó en la digestió enzimàtica. La masticació i la textura de la bitla de pans torrats de blat es va veure afectada per les seues diferencies estructurals, tot i que no es van observar diferències en la percepció sensorial. El procés de panificació va oferir la possibilitat de modificar l'estructura del pa. De fet, la variació de la forma de la massa va donar lloc a pans amb diferents propietats d'estructura i textura de la molla. La digestió dels pans amb diferent estructura de molla va confirmar que es disgregaven de manera diferent, produint variacions en la posterior digestibilitat del midó. Una vegada que es va establir la importància de la microestructura de la molla en la digestió del midó, es va canviar l'enfocament per a enllaçar la microestructura dels gels de midó amb la seua digestió in vitro. Els gels obtinguts amb midó de diferent fonts botàniques van mostrar diferent digestibilitat, el que es va relacionar amb la seua microestructura, però també amb el seu contingut d'amilosa. Considerant l'acció dels enzims digestius (α-amilasa i α-glucosidasa) sobre la hidròlisi del midó, es van estudiar diferents compostos fenòlics per a comprendre les interaccions entre els fenòlics i els enzims o substrats. La forma més eficaç d'inhibir els enzims era incubar-los amb àcids fenòlics. Es va necessitar una major concentració de l'inhibidor quan els compostos fenòlics interactuaven prèviament amb el substrat, a causa de la seua retenció dins del gel de midó. L'estructura química dels àcids fenòlics controlava la inhibició de l'enzim. Així mateix, els extractes fenòlics complexos, com els extrets de l'alga A. nodosum, podrien utilitzar-se per a inhibir els enzims digestius, mostrant major efecte inhibidor quan van ser prèviament incubats amb l'enzim, a causa de l'existència de complexos carbohidrat-polifenols amb les seues diferents capacitats inhibitòries. A més, els àcids fenòlics van afectar les propietats de pegat i, per tant, la estructura i textura dels gels de midó. No obstant, estos canvis en la estructura i textura dels gels no van ser suficients per a controlar la hidròlisi enzimàtica del midó, que estava relacionada amb l'estructura química dels àcids fenòlics i les seues propietats. En general, la microestructura de la molla de pa o gel de midó pot limitar l'accessibilitat dels enzims digestius, la qual cosa reduiria la hidròlisi del midó. A més, la inclusió d'àcids fenòlics en aliments a base de midó podria ser l'alternativa per a reduir el grau de digestió del midó en inhibir aquests enzims., [EN] Due to the increasing importance of diet on health management, it remains of utmost interest to unravel how food is processed in the human digestive system. Food structure can significantly influence food processing, affecting its performance during eating and digestion. Specifically, the digestion of carbohydrates-based foods requires further insight due to their contribution to blood glucose levels. The knowledge of starch digestion kinetics will contribute to design tailored foods for managing postprandial glucose levels. The objective of this doctoral thesis was to acquire a better understanding of the impact of microstructure on starch digestion and how digestive enzymes might be modulated by the use of phenolic compounds. With that purpose, the role of bread structure on in vivo mastication, and in vitro digestion was evaluated. Subsequently, starch gels from different sources were produced and digested in an in vitro oro-gastro-intestinal digestion system to analyze the impact of gel microstructure. After the microstructure studies on bread and starch gels, different phenolic acids or seaweed polyphenolic extracts were explored as inhibitors of starch digestive enzymes, and the involvement of starch gel microstructure on the enzymatic digestion was assessed. Mastication of toasted wheat breads was affected by their different structures, despite no differences in the sensory perception was observed. Bolus texture was also altered by bread structure and texture. The breadmaking process offered the possibility to modify the bread structure. In fact, varying dough shaping led to breads with different crumb structure and texture properties. After stressing the importance of selecting the in vitro oral processing method used to simulate mastication, the further digestion of the bread with different crumb structure confirmed that they were differently disaggregated yielding variations on posterior starch digestibility. Once stating the importance of crumb microstructure on starch digestion, the focus was shifted to connect starch gels microstructure with its in vitro digestion. Gels obtained with a different type of starch, from cereals, pulses, or tubers, showed different digestibility, which was related to their microstructure but also their amylose content. Considering the action of digestive enzymes (α-amylase and α-glucosidase) on starch hydrolysis, different phenolic compounds were studied to understand the interactions between phenolics and either enzymes or substrates. The most effective way to inhibit enzymes was to incubate them with phenolic acids. A higher concentration of the inhibitor was needed when phenolic compounds interacted previously with the substrate, due to their retention within the starch gel. The chemical structure of phenolic acids controlled the enzyme inhibition. Similarly, complex phenolic extracts, like those extracted from A. nodosum seaweed could be used to inhibit digestive enzymes, showing greater inhibition effect when they were previously incubated with the enzyme, owing to the existence of carbohydrate-polyphenol complexes their different inhibitory capabilities. In addition, phenolic acids affected pasting properties and therefore gel microstructure and gel texture of starches. However, those changes on gels microstructure and texture were not enough to control starch enzymatic hydrolysis, which was related to the specific chemical structure of the phenolic acids and their properties. Overall, crumb or gel microstructure can limit digestive enzymes accessibility, which would reduce the starch hydrolysis. Moreover, the inclusion of phenolic acids on starch-based foods might be the alternative to reduce the extent of starch digestion by inhibiting digestive enzymes., Authors acknowledge the financial support of the Spanish Ministry of Science, Innovation and Universities (Project RTI2018-095919-B-C21) funded by MCIN/AEI/10.13039/501100011033, “ERDF A way of making Europe” by the “European Union”, Generalitat Valenciana (Project Prometeo 2017/189) and Xunta de Galicia (ED431B 2019/01). This work is based upon the work from COST Action 18101 SOURDOMICS – Sourdough biotechnology network towards novel, healthier and sustainable food and bioprocesses, where A. Aleixandre was supported by COST (European Cooperation in Science and Technology). COST is a funding agency for research and innovation networks.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Retos y propuestas ante la inminente implantación de la evaluación de destrezas orales en el examen de lengua extranjera de la futura PAU, Challenges and Proposals for new Spanish universities pre-entry exam: evaluating oral skills in foreign languages

  • Martínez Sáez, Antonio
  • Sevilla Pavón, Ana Mercedes
  • García Laborda, Jesús
  • Enríquez Carrasco, Emilia Victoria
[ES] El Ministerio de Educación ha publicado recientemente un nuevo Real Decreto que regula la Prueba de Acceso a la Universidad y contempla la incorporación de cambios en el examen de lengua extranjera, cuyo objetivo es valorar la comprensión oral y lectora, además de la expresión oral y escrita. Debido a que el hecho de examinar la comprensión y expresión oral del estudiante es un componente nuevo en este examen, los docentes de la enseñanza secundaria han mostrado sus dudas e inquietudes y han empezado a plantearse cómo tendrán que adaptar su metodología docente. Varios proyectos y estudios en la Comunidad Valenciana demuestran que es posible introducir la evaluación de las destrezas orales en la Prueba de Acceso a la Universidad. Este trabajo también presenta una serie de posibilidades para la puesta en práctica real de la evaluación de tales destrezas, considerada especialmente factible mediante sistemas informáticos. La comunicación concluye que los puntos favorables exceden a los negativos, y que los profesores cambian su forma de pensar y muestran actitudes positivas tras experimentar con las interfaces de exámenes orales asistidos por ordenador., [EN] The Spanish Ministry of Education has recently passed the new legislation that regulates the university entry exam and the introduction of a foreign language test which would include the evaluation of oral and written comprehension and production skills. The evaluation of oral skills is a new component in the foreign language university entry exam. Therefore, the education professionals are expressing their doubts and worries and are already thinking about the way in which these changes would affect or change their current educational methodology. Several projects and studies developed in the Region of Valencia confirm that the introduction of the evaluation of oral skills in the university entry examination (PAU) is possible. This paper presents a series of possibilities which would permit the evaluation of these skills, which is especially feasible through computer assisted systems. This article concludes by mentioning that the positive aspects exceed the negative ones and that teachers change their point of view and show a positive attitude after working with computer assisted exam interfaces., Desde 2008 se desarrolla la plataforma PAU-ER, dentro del proyecto PAULEX Universitas, subvencionado por el Ministerio de Ciencia e Innovación (HUM2007-66479-C02-01), y del proyecto Selector, subvencionado por la Generalitat Valenciana (GV2007/189), para el estudio de la viabilidad de la prueba con profesores y alumnos de 2º de Bachillerato.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Lower bounds and heuristics for the Windy Rural Postman Problem

  • Benavent, E.
  • Carrotta, A.
  • Corberán, A.
  • Vigo, D.
  • Sanchís Llopis, José María|||0000-0002-0039-8122
[EN] In this paper we present several heuristic algorithms and a cutting-plane algorithm for the Windy Rural Postman Problem. This problem contains several important Arc Routing Problems as special cases and has very interesting real-life applications. Extensive computational experiments over different sets of instances are also presented., The contribution by E. Benavent, A. Corberán and J.M. Sanchis has been supported by the Ministerio de Ciencia y Tecnología of Spain through grant TIC2003-05982-C05-01 (partially financed with FEDER funds) and by the Generalitat Valenciana (Ref: GRUPOS03/174 and GRUPOS03/ 189). A. Carrotta and D. Vigo thank the Ministero Dell Istruzione, dell Università e della Ricerca (M.I.U.R.) and the Consiglio Nazionale delle Ricerche (C.N.R.), Italy, for the support given to this project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spanish students and teachers&apos, preferences towards computer-based and paper-and-pencil tests at universities

  • De-Siqueira, J.M.|||0000-0002-4579-1147
  • Peris Fajarnes, Guillermo|||0000-0001-9215-9091
  • Magal-Royo, Teresa|||0000-0002-7640-6264
  • Gimenez, Fernando
[EN] This study was conducted to identify and analyze some significant features that influence students and teachers about computer-based tests (CBT) and paper-and-pencil tests (P&P) at the context of the PAULEX Project. In order to do that, a large experiment has been developed at the Universidad Politécnica de Valencia (Polytechnic University of Valencia), Spain, in which several students and professors have answered a validated questionnaire about their usage of technology, feelings and experiences. They also compared their preferences after doing two similar basic tests, CBT and P&P., Acknowledgements are due to the Spanish Ministry of Science and Innovation for funding the PAULEX Project, to all participants of this experiment for their generous collaboration and to the Camille Research Group sponsors for cooperating.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Comparison of Nonparametric Methods in the Graduation of Mortality: Application to Data from the Valencia Region (Spain)

  • Debón, A.|||0000-0002-5116-289X
  • Montes-Suay, Francisco
  • Sala-Garrido, Ramón
[EN] The nonparametric graduation of mortality data aims to estimate death rates by carrying out a smoothing of the crude rates obtained directly from original data. The main difference with regard to parametric models is that the assumption of an age-dependent function is unnecessary, which is advantageous when the information behind the model is unknown, as one cause of error is often the choice of an inappropriate model. This paper reviews the various alternatives and presents their application to mortality data from the Valencia Region, Spain. The comparison leads us to the conclusion that the best model is a smoothing by means of Generalised Additive Models (GAM) with splines. The most interesting part of this paper is the development of a plan that can be applied to mortality data for a wide range of age groups in any geographical area, allowing the most appropriate table to be chosen for the data in hand., The authors are indebted to the anonymous referees whose suggestions improved the original manuscript. This work was partially supported by a grant from MEyC (Ministerio de Educación y Ciencia, Spain, project MTM-2004-06231).The research of Francisco Montes has also been partially supported by a grant from DGITT (Direcció General d Investigació i Transferència Tecnològica de la Generalitat Valenciana, Project GRUPOS03/189).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A kinetic study of the formation of smectic phases in novel liquid crystal ionogens

  • Martinez-Felipe, Alfonso
  • Badia, J.D.
  • Santonja Blasco, Laura
  • Imrie, C.T.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] A multi-rate non-isothermal kinetic analysis of the isotropic-melt to liquid crystalline phase transition of novel liquid crystalline ionogenic copolymers, LCIs, the 10-(4-methoxyazobenzene-4'-oxy)decyl methacrylate]-co-2-(acrylamido-2-methyl-1-propanesulfonic acid)s, 10-MeOAzB/AMPS, copolymers, has been performed by means of calorimetric experiments. An analytical methodology which includes the study of the phase transition rate parameter, the determination of the activation energies by using Kissinger and Flynn-Wall-Ozawa models, and the study of the phase transition kinetics by the use of the Avrami theory, has been applied. The formation of the mesophases from the isotropic state occurred close to thermodynamic equilibrium. The results evidence the presence of several individual processes in the formation of liquid crystalline phases from the melt and a strong dependence of phase transition rates and activation energies with acid contents. A decrease in the phase transition rate, related to a decrease in the overall change of the transition entropy, has been observed. The final inhibition of the liquid crystal (LC) behaviour is ascribed to an exponential increase in the activation energy of the phase transition, promoted by strong acid aggregation. An optimum composition of the 10-MeOAzB/AMPS copolymers to achieve the dual characteristics of LCIs (ionogenic and liquid crystalline behaviour) requires acid concentrations capable of promoting structure-forming effects on the LC phases and the evolution of phase separated morphologies., The authors would like to acknowledge the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, ENE2011-28735-C02-01, IT-2009-0074 and three FPI and FPU predoctoral grants, and the financial support of the Generalitat Valenciana, through the Grisolia and Forteza programs and the ACOMP/2011/189 program. The Vice-rectorate for Research of UPV is also thanked for additional support through the PAID 05-09-4331, PAID-05-11/2806, and PAID 06-11-2037 projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An asymmetric TSP with time windows and with time-dependent travel times and costs: An exact solution through a graph transformation

  • Albiach, José
  • Soler Fernández, David
  • Sanchís Llopis, José María|||0000-0002-0039-8122
[EN] In this paper we deal with an extended version of the Asymmetric Traveling Salesman Problem with Time Windows (ATSPTW) that considers time-dependent travel times and costs, for a more accurate approximation of some routing problems inside large cities, in which the time or cost of traversing certain streets (e.g. main avenues) depends on the moment of the day (for example rush-hours). Unlike other existing papers about time-dependent routing problems, we focus on an exact method for solving this new problem. For this end we first transform the problem into an Asymmetric Generalized TSP and then into a Graphical Asymmetric TSP. In this way, we can apply a known exact algorithm for the Mixed General Routing Problem, which seems to run well with our resulting instances. Computational results are presented on a set of 270 adapted instances from benchmark ATSPTW instances., This work has been partially supported by the Ministerio de Ciencia y Tecnología of Spain (project TIC2003-05982-C05-01) and the Generalitat Valenciana (Ref: GRUPOS03/189). Thanks are due to Michel Gendreau, Alain Hertz, Gilbert Laporte and Mihnea Stan for providing us the set of benchmark ATSPTW instances, and to Matteo Fischetti and Norbert Ascheuer for their suggestions and help about the computational experiments. Last we are also indebted to the three anonymous referees for their valuable comments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative thermal, biological and photo degradation kinetics of polylactide and effect on crystallization rates

  • Santonja Blasco, Laura
  • Alamo, R. G.
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] A comparison is made between available literature and present results of the three major types of polylactide (PLA) degradation giving a compiled view on the details of degradation mechanisms with relation to explicit factors affecting degradation. The temporal decrease of molar mass has been analyzed under isothermal conditions at 220 degrees C, biological and photodegradation conditions using a polylactide (PLA) with similar to 4 mol% D units. The decrease of molar mass with time during biodegradation follows a first order process (M = M(o)e(-kt)) while the molar mass of specimens tested during thermal and photodegradation follows a second order law (1/M = (1/M-o) + kt) Literature data obtained in similar degradation conditions were also adequately fitted with these equations. This allows us to conclude that the main step in the three types of degradation is a random chain excision, with some differences in the algebraic functionality. Under the degradation conditions tested, the degradation rate follows the progression thermal > photo > biological. For equivalent molar mass, the effect of degradation type on cold crystallization and melting is significant indicating that degradation cannot be explained by a solely outcome of chains breakage and molar mass reduction. This feature is especially prominent when the linear growth rates of specimens subjected to bio or photo degradation are compared. Anhydride groups that are formed during photodegradation decrease the crystallization rate compared to biodegraded specimens of equivalent molar mass. The molar mass dependence of the maximum growth rate follows a power law with exponents 1.3 for bio and 1.0 for photodegraded specimens, representative of semi-entangled systems. The temperature coefficient of the growth rate, analyzed according to secondary nucleation leads to a linear dependence for bio and photodegraded specimens, and to values of the surface free energy of crystallites that decrease from similar to 85 to 55 erg/cm(2) with decreasing molar mass. Combinations of molar mass characterization, FTIR, and thermal and crystallization rate analysis are proven useful strategies to assess and discriminate macroscopic changes of PLA structure induced by different types of degradation. This work also underlines the importance of analyzing the linear growth rates as a parameter that uncovers specific structural changes during degradation. (c) 2012 Elsevier Ltd. All rights reserved., The authors thank the USA National Science Foundation for partial funding of this work. Also acknowledged are the Spanish Ministry of Science and Innovation, Research Projects ENE2007-67584-C03-02, UPOVCE-3E-013, ENE2011-28735-C02-01, FPI predoctoral grant to L.Santonja-Blasco, and support from the Generalitat Valenciana, through the ACOMP/2011/189 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bioactive zinc-doped sol-gel coating modulates protein adsorption patterns and in vitro cell responses

  • Cerqueira, A.
  • Romero-Gavilán, F.
  • García-Arnáez, I.
  • Ozturan, S.
  • Iloro, I.
  • Azkargorta, M.
  • Elortza, F.
  • Izquierdo, R.
  • Gurruchaga, M.
  • Goñi, I.
  • Suay, J.
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
[EN] Zinc is an essential element with an important role in stimulating the osteogenesis and mineralization and suppressing osteoclast differentiation. In this study, new bioactive ZnCl2-doped sol-gel materials were designed to be applied as coatings onto titanium. The biomaterials were physicochemically characterized and the cellular responses evaluated in vitro using MC3T3-E1 osteoblasts and RAW264.7 macrophages. The effect of Zn on the adsorption of human serum proteins onto the material surface was evaluated through nLC-MS/MS. The incorporation of Zn did not affect the crosslinking of the sol-gel network. A controlled Zn2+ release was obtained, reaching values below 10 ppm after 21 days. The materials were no cytotoxic and lead to increased gene expression of ALP, TGF-beta, and RUNX2 in the osteoblasts. In macrophages, an increase of IL-1 beta, TGF-beta, and IL-4 gene expression was accompanied by a reduced TNF-alpha liberation. Proteomic results showed changes in the adsorption patterns of proteins associated with immunological, coagulative, and regenerative functions, in a Zn dose-dependent manner. The variations in protein adsorption might lead to the downregulation of the NF-kappa B pathway, thus explain the observed biological effects of Zn incorporation into biomaterials. Overall, these coatings demonstrated their potential to promote bone tissue regeneration., This work was supported by MINECO [MAT2017-86043-R; RTC2017-6147-1], Generalitat Valenciana [GRISOLIAP/2018/091], Universitat Jaume I under [UJI-B2017-37, Posdoc/2019/28], the University of the Basque Country under [GIU18/189] and Basque Government under [PRE_2017_2_0044]. The authors would like to thank Raquel Oliver, Jose Ortega and Iraide Escobes for their valuable technical assistance, and Antonio Coso (GMI-Ilerimplant) for producing the titanium discs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spatial resolution and reconstructed size accuracy using advanced beamformers in linear array-based PAT systems

  • Pi-Martín, Irene
  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • García-Garrigos, Juan José
  • Jimenez, Noe|||0000-0002-6539-670X
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] Limitations associated with linear-array probes in photoacoustic tomography are partially compensated by using advanced beamformers that exploit the temporal and spatial coherence of the recorded signals, such as Delay Multiply and Sum (DMAS), Minimum Variance (MV) or coherence factor (CF), among others. However, their associated signal processing leads to an overestimation of the spatial resolution, as well as alterations in the reconstructed object size. Numerical and experimental results reported here support this hypothesis. First, we show that the Rayleigh criterion (RC) is the most suitable choice to characterize the spatial resolution instead of the Point Spread Function (PSF) when considering advanced beamformers. Then, we observe that several advanced beamformers fail to properly reconstruct target sizes slightly above the spatial resolution, underestimating their size. This work sheds light on the suitability of this type of beamformers combined with linear probes for determining sizes and morphology in photoacoustic images., We are grateful for financial support from Agencia Estatal de Investigación (PID2019-111436RBC22 and PID2022-142719OB-C21), Generalitat Valenciana through the programs Equipamiento e Infraestructuras FEDER 2021-22 IDIFEDER/2021/004 and Programa de Garantía Juvenil I+D EDGJID/2021/189, and Agéncia Valenciana de la Innovació through Grant INNVA1/2022/50. N. Jiménez is grateful for financial support from the Spanish Ministry of Science, Innovation and Universities (MICIU) through grants Juan de la Cierva - Incorporación , IJC2018-037897-I and Ramón &#119910; Cajal RYC2021-034920-I. A. Cebrecos is grateful for financial support from Universitat Politècnica de València through programs PAID-10-19 PAID-PD-22. Irene Pi is grateful for financial support from Generalitat Valenciana through programme CIACIF/2021/403.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Understanding the effect of emulsifiers on bread aeration during breadmaking

  • Garzon, Raquel
  • Molina Rosell, Maria Cristina
  • Hernando Hernando, Mª Isabel|||0000-0002-3322-935X
  • Llorca Martínez, Mª Empar|||0000-0003-3346-3135
[EN] BACKGROUNDMuch research has been done to explain the action of emulsifiers during breadmaking, but there is still plenty unknown to elucidate their functionality despite their diverse chemical structure. The aim of the present study was to provide some light on the role of emulsifiers on air incorporation into the dough and gas bubbles progress during baking and their relationship with bread features. Emulsifiers like diacetyl tartaric acid ester of monoglycerides (DATEM), sodium stearoyl lactylate (SSL), distilled monoglyceride (DMG-45 and DMG-75), lecithin and polyglycerol esters of fatty acids (PGEF) were tested in very hydrated doughs. RESULTSEmulsifiers increase the maximum dough volume during proofing. Emulsifiers increase the number of bubbles incorporated during mixing, observing higher number of bubbles, particularly with PGEF. Major changes in dough occurred at 70K when bubble size augmented, becoming more heterogeneous. DMG-75 produced the biggest bubbles. As a consequence, emulsifiers tend to increase the number of gas cells with lower size in the bread crumb, but led to greater crumb firmness, which suggested different interactions between emulsifiers and gluten, affecting protein polymerization during baking. CONCLUSIONThe progress of the bubbles during baking allowed the differentiation of emulsifiers, which could explain their performance in breadmaking. (c) 2018 Society of Chemical Industry, Authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness (Project AGL2014-52928-C2-1-R), the European Regional Development Fund (FEDER) and Generalitat Valenciana (Project Prometeo 2017/189).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hygrothermal ageing of reprocessed polylactide

  • Badia, J.D.
  • Santonja Blasco, Laura
  • Martinez-Felipe, Alfonso
  • Ribes-Greus, A.|||0000-0003-2460-8291
[EN] The influence of an accelerated hygrothermal ageing simulation test on a commercial PLA and its three subsequent mechanically-reprocessed materials was studied. The analysis was focused on the water diffusion kinetics and the physico-chemical changes induced by the hygrothermal degradation. Water diffusion proceeded faster than chain relaxation processes, as defined by a Case II absorption model. It was proved that the water diffusion rate decreased with subsequent reprocessing cycles and increased with higher hygrothermal ageing temperatures. Hydrolytic chain scission provoked significant molar mass decays and consequent general losses of thermal and mechanical performance. The rearrangement into crystalline fractions of shorter chains provoked by hygrothermal ageing was qualitatively and quantitatively followed by both Fourier-Transform Infrared Spectroscopy and Differential Scanning Calorimetry. The microstructural changes were monitored by the cold-crystallization temperature, the crystallinity degree XC and the absorbance intensity ratio I921/I955. A Weibull model showed that the crystallites were formed faster at higher reprocessing cycles and at lower hygrothermal ageing temperatures. All these effects were particularly significant for PLA reprocessed more than one time., B.Sc. Oscar Gil-Castell is acknowledged for his dedication in the lab and his outstanding attitude towards learning. The authors thank the Spanish Ministry of Science and Innovation, through the Research Projects ENE2011-28735-C02-01 and UPOVCE-3E-013, the Ministry of Education and Science for the awarding of the FPI pre-doctoral grant to L. Santonja-Blasco and FPU pre-doctoral grants to A. Martinez-Felipe and J.D. Badía. The financial support of the Generalitat Valenciana, through the Grisolia (A. Martinez-Felipe) and Forteza (J.D. Badia) programs and the ACOMP/2011/189. UPV is thanked for additional support through the PAID 05-09-4331 program and the PAID 04-11 for the allowance conceded to attend to the III International Conference on Biodegradable and Biobased Polymers (BIOPOL2011) in Strasbourg.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of Structure Formation in Side-Chain Liquid Crystal Copolymers by Variable Temperature Fourier Transform Infrared Spectroscopy

  • Martinez-Felipe, Alfonso
  • Imrie, Corrie Thomas
  • Ribes-Greus, A.|||0000-0003-2460-8291
The formation of smectic phases in side-chain liquid crystal copolymers, SCLCPs, containing sulfonic acid-based nonmesogenic units, has been investigated using variable temperature FT-IR microscopy. Two copolymers have been characterized, namely, the poly[10-(4-methoxy-4′-oxy-azobenzene) decyl methacrylate]−copoly[2-acrylamido-2-methyl-1- propanesulfonic acid]s, the X-MeOAzB/AMPS copolymers, containing X = 0.71 and 0.56 mol fraction of mesogenic sidechains, respectively. For comparative purposes the corresponding side chain liquid crystal homopolymer, poly[10-(4-methoxy-4′- oxy-azobenzene) decyl methacrylate], MeOAzB, has also been characterized. The 0.56-MeOAzB/AMPS copolymer exhibits a bilayer smectic A phase, in which the mesogenic side chains constitute one layer with a SmA1 packing arrangement and the sulfonic acid groups another; whereas in the smectic A phase shown by the 0.71-MeOAzB/AMPS copolymer, the acid groups are located within the smectic layers giving a partially interdigated SmAd phase and reducing side chain packing efficiency. Smectic stabilization is attributed to a combination of stronger interactions involving the ester groups, as reflected in changes to the C O stretching band at ν ∼ 1730 cm−1 , and hydrogen bonding between the amide groups within the acid-based layers, as inferred by changes to the NH stretching band at ν ∼ 3320 cm−1 . The temperature response observed for groups with different chemical environments permits the mapping of the short-range interactions between the various structural components in SCLCPs with a view to controlling the functionality of the materials., This paper is meant to be a tribute and recognition to the research activity of Professor Giulio Sarti. The authors also thank the Spanish Ministry of Science and Innovation, through the Research Projects ENE2007-67584-C03, UPOVCE-3E-013, IT2009-0074, ENE2011-28735-C02-01 and two FPI and FPU predoctoral grants, and the financial support of the Generalitat Valenciana, through the Grisolia (GRISOLIAP/2010/057, GRISOLIAP/2012/056, GRISOLIAP/2013/A/036) and Forteza programs and the ACOMP/2011/189 program. The UPV is also thanked for additional support through the PAID 05-09-4331 and PAID-06-11 program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of magnesium doped sol-gel biomaterial for bone tissue regeneration: the effect of Mg ion in protein adsorption

  • Cerqueira, Andreia
  • Romero-Gavilán, Francisco
  • García-Arnáez, Iñaki
  • Ozturan, Seda
  • Izquierdo, Raúl
  • Azkargorta, Mikel
  • Elortza, Félix
  • Gurruchaga, Mariló
  • Suay, Julio
  • Goñi, Isabel
  • Martínez-Ramos, Cristina|||0000-0002-6540-4714
[EN] Magnesium is the fourth most abundant element in the human body with a wide battery of functions in the maintenance of normal cell homeostasis. In the bone, this element incorporates in the hydroxyapatite structure and it takes part in mineral metabolism and regulates osteoclast functions. In this study, sol-gel materials with increasing concentrations of MgCl2 (0.5, 1, and 1.5%) were synthesized and applied onto Ti surfaces as coatings. The materials were first physicochemically characterized. In vitro responses were examined using the MC3T3-E1 osteoblastic cells and RAW264.7 macrophages. Human serum protein adsorption was evaluated employing nLC-MS/MS. The incorporation of Mg did not affect the crosslinking of the sol-gel network, and a controlled release of Mg was observed; it was not cytotoxic at any of the tested concentrations. The cytoskeleton arrangement of MC3T3-E1 cells cultured on the Mg-doped materials changed in comparison with controls; the cells became more elongated, with protruded lamellipodia and increased cell surface. The expression of integrins (ITGA5 and ITGB1) was boosted by Mg-coatings. The ALP activity and expression of TGF-beta, OSX and RUNX2 genes were also increased. In RAW264.7 cells, TNF-alpha secretion was reduced, while TGF-beta and IL-4 expression rose. These changes correlated with the altered protein adsorption patterns. The Mg-doped coatings showed increased adsorption of anti-inflammatory (CLUS, IC1, CFAH, and VTNC), cell adhesion (DSG1, FILA2, and DESP) and tissue regeneration (VTNC and CYTA) proteins. This integrated approach to biomaterial characterization revealed the potential of Mg in bone tissue regeneration., This work was supported by MINECO [MAT2017-86043-R; RTC2017-6147-1], Generalitat Valenciana [GRISOLIAP/2018/091, APOSTD/2020/036, PROMETEO/2020/069], Universitat Jaume I under [UJI-B2017-37, Posdoc/2019/28], the University of the Basque Country under [GIU18/189] and Basque Government under [PRE_2017_2_0044]. The authors would like to thank Raquel Oliver, Jose Ortega, Jos ' e Miguel Pedra and Iraide Escob ' es for their valuable technical assistance and Antonio Coso (GMI-Ilerimplant) for producing the titanium discs.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Absence of CX3CR1 impairs the internalization of Tau by microglia

  • Bolós, Marta
  • Llorens-Martín, María
  • Perea, Juan Ramón
  • Jurado-Arjona, Jerónimo
  • Rábano, Alberto
  • Hernández Pérez, Félix
  • Ávila, Jesús
[Background] Extracellular Tau is toxic for neighboring cells, and it contributes to the progression of AD. The CX3CL1/CX3CR1 axis is an important neuron/microglia communication mechanism., [Methods] We studied Tau clearance by microglia both in vitro (microglia primary cultures treated with Cy5-Tau, affinity chromatography to study the binding of Tau to CX3CR1, and Tau-CX3CL1 competition assays) and in vivo (stereotaxic injection of Cy5-Tau into WT and CX3CR1−/− mice). The expression of CX3CR1, CX3CL1 and the microglial phagocytic phenotype were studied in brain tissue samples from AD patients., [Results] Tau binding to CX3CR1 triggers the internalization of the former by microglia, whereas S396 Tau phosphorylation decreases the binding affinity of this protein to CX3CR1. Of note, the progressive increase in the levels of phosho-Tau occurred in parallel with an increase in CX3CR1. In addition, our studies suggest that the phagocytic capacity of microglia in brain tissue samples from AD patients is decreased. Furthermore, the CX3CR1/CX3CL1 axis may be impaired in late stages of the disease., [Conclusions] Our data suggest that the CX3CR1/CX3CL1 axis plays a key role in the phagocytosis of Tau by microglia in vitro and in vivo and that it is affected as AD progresses. Taken together, our results reveal CX3CR1 as a novel target for the clearance of extracellular Tau., This study was funded by grants from the Spanish Ministry of Economy and Competitiveness (SAF-2014-53,040-P (Jesús Ávila) and RYC-2015-17,189 (María Llorens-Martín)), the Centro de Investigasción Biomédica en Red sobre Enfermedades Neurodegeneritivas (CIBERNED, ISCIII) (Jesús Ávila), the Alzheimer’s Association (2015-NIRG-340709) (María Llorens-Martín), and the Association for Frontotemporal Degeneration (AFTD) (Basic Science Pilot Grant Award 2016 (María Llorens-Martín))., Peer reviewed
ReDivia Repositorio Digital del Instituto Valenciano de Investigaciones Agrarias
Publicación Artículo científico (JournalArticle)

Nutraceutical profiles of apricots (Prunus armeniaca L.) as a source of fruit quality traits for breeding

  • Gómez-Martínez, Helena
  • Bermejo, Almudena
  • Badenes, María L.
  • Zuriaga, Elena
Aim of study: In a social context of increasing concern about healthy diets, the development of new varieties with enhanced content in nutraceutical compounds is an important objective of the fruit breeding programs currently developed. In this sense, apricot is a fruit crop very appreciated by consumers worldwide due to its organoleptic characteristics, but also plays an important role in human nutrition due to its content of phytocompounds as sugars, organic acids, vitamins and polyphenols. Area of study: The identification of sources of variation for these traits could be useful for apricot breeding worldwide. Material and methods: New selections from the apricot breeding program carried out at the Instituto Valenciano de Investigaciones Agrarias (IVIA, Spain) and traditional varieties have been analysed aimed at identifying sources of genetic variation for fruit quality. For this purpose, sugar content, organic acids and ascorbic acid were studied during three crop years. Main results: Results revealed sucrose and glucose as the major sugars, malic and citric acid as the main organic acids, and diverse ascorbic acid content among the cultivars studied. Research highlights: Some accessions point as potential sources to increase fruit quality. In addition, the study showed that apricot peel is an excellent source of nutraceutical compounds. Moreover, this study opens up new possibilities to study the genetic control of these traits in apricot in the future.