Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 30
Encontrada(s) 1 página(s)

e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Feasible integration in asphalt of piezoelectric cymbals for vibration energy harvesting

  • Moure, A.
  • Izquierdo Rodríguez, M.A.
  • Hernández Rueda, S.
  • Gonzalo Martín, Alicia
  • Rubio-Marcos, F.
  • Urquiza Cuadros, D.
  • Pérez-Lepe, A.
  • Fernandes, J.F.
Piezoelectric cymbals with 29-mm diameter and different configurations are fabricated and tested to determine the best conditions to optimize the conversion of mechanical to electric energy. Then, the ones with the best results are integrated directly in asphalt to evaluate their performance as vibration energy harvesters in roads, in a test bench designed to characterize these parameters. The main cymbal parameters and their integration in the asphalt are determined. For the first time, the electrical energy that can be obtained with the embedment of cymbals in asphalt is evaluated. Each single piezoceramic cymbal recovers up to 16 mu W for the pass of one heavy vehicle wheel. An extrapolation of the energy transformed by the integrated cymbals in roads with high vehicle densities, such as in a peri-urban motorway, is approached. Energy densities in the range of 40-50 MW h/m(2) can be obtained at 100 m of road (use of 30,000 cymbals), which could account for more than 65 MW h in a year. All this with a relatively low cost for an emerging technology (less than 2 (sic)/kW h). The conversion of wasted and unused vibrational energy in roads by piezoelectric cymbals is thus proved as a real possibility of energy harvesting., The authors are grateful to MINECO Project MAT2013-48009-C4-1-P for the financial support provided for this research. Dr. F. Rubio-Marcos is also indebted to MINECO for a “Juan de la Cierva” contract (Ref. JCI-2012-14521), which is co-financed with European Social Fund. Dr. Alberto Moure is also indebted to MINECO for the “Ramón y Cajal” contract (Ref. RYC-2013-14436), which is co-financed with European Social Fund.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Skutterudites as thermoelectric materials: Revisited

  • Rull Bravo, Marta
  • Moure Arroyo, Alberto
  • Fernández Lozano, José Francisco
  • Martín-González, Marisol
© The Royal Society of Chemistry 2015. The research on skutterudites in the last few years has contributed to a better understanding of the physical processes which play an important role in enhancing their thermoelectric performance and to the discovery of novel filled compounds, with one of the most promising zT values at intermediate temperatures. Skutterudites are still an ongoing field of research, and an improvement of their efficiencies, stabilities, contacts, industrial scalable fabrication processes and other factors are expected in the near future in order to develop viable modules for intermediate temperature range applications, such as in the automobile industry, factories or incinerators. This paper gives a review on the status of research in the field of skutterudites., The authors acknowledge partial financial support from NEXTEC “Next Generation Nano-engineered Thermoelectric Converters – from concept to industrial validation”, project founded by the European Commission under the Seventh Framework Programme (FP7) since July 2011 Grant # 263167. A. M. and J. F. F. are grateful to MICINN project MAT2013-48009-C4-1-P for the financial support provided for this research. Dr Alberto Moure is also indebted to MINECO for the “Ramón y Cajal” contract (ref. RYC-2013-14436)., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mössbauer and Magnetic Properties of Coherently Mixed Magnetite-Cobalt Ferrite Grown by Infrared Pulsed-Laser Deposition

  • de la Figuera, Juan
  • Quesada, Adrián
  • Martín-García, Laura
  • Sanz, Mikel
  • Oujja, Mohamed
  • Castillejo, Marta
  • Mascaraque, Arantzazu
  • N'Diaye, A. T.
  • Foerster, M.
  • Aballe, Lucía
  • Marco, J.F.
We have studied the magnetic properties and the composition of cobalt ferrite single crystal films on SrTiO3 : Nb grown by infrared pulsed-laser deposition. Mössbauer spectra have been recorded from both the target used to grow the films and the films themselves. The Mössbauer spectra of the target taken at low temperatures show a strong dependence of the recoil free fraction of the octahedral sites with temperature. The films composition, with a coexistence of Co-enriched cobalt ferrite and magnetite, has been estimated assuming a similar ratio of the recoil free fractions of the films. X-ray absorption and x-ray magnetic circular dichroism measurements confirm the valence composition of the film and show ferromagnetic Fe-Co coupling in the films with a coercive field around 0.5 T at room temperature. The combination of these characterization techniques allows establishing the coherent structural and magnetic properties of this biphase system., (MINECO) through Projects No. MAT2012 - 38045 - C04 - 01, CTQ2013 - 43086 - P, and MAT2013 - 48009 - C4 - 1 - P and by the EU - FP7 NANOPYME Project (No. 310516)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning Eu3+ emission in europium sesquioxide films by changing the crystalline phase

  • Mariscal, A.
  • Quesada, Adrián
  • Camps, I.
  • Palomares, F. Javier
  • Fernández Lozano, José Francisco
  • Serna, Rosalía
6 págs.; 6 figs., We report the growth of europium sesquioxide (EuO) thin films by pulsed laser deposition (PLD) in vacuum at room temperature from a pure EuO ceramic bulk target. The films were deposited in different configurations formed by adding capping and/or buffer layers of amorphous aluminum oxide (a-AlO). The optical properties, refractive index and extinction coefficient of the as deposited EuO layers were obtained. X-ray photoelectron spectroscopy (XPS) measurements were done to assess its chemical composition. Post-deposition annealing was performed at 500 °C and 850 °C in air in order to achieve the formation of crystalline films and to accomplish photoluminescence emission. According to the analysis of X-ray diffraction (XRD) spectra, cubic and monoclinic phases were formed. It is found that the relative amount of the phases is related to the different film configurations, showing that the control over the crystallization phase can be realized by adequately designing the structures. All the films showed photoluminescence emission peaks (under excitation at 355 nm) that are attributed to the intra 4f-transitions of Eu ions. The emission spectral shape depends on the crystalline phase of the EuO layer. Specifically, changes in the hypersensitive D → F emission confirm the strong influence of the crystal field effect on the Eu energy levels.© 2015 Elsevier B.V, Spanish Ministry of Economy and Competitiveness through the projectsTEC2012-38901-C02-01, MAT2013-47878-C2-1-R and MAT2013-48009-C4-1-P co-funded with FEDER funds. A.M. acknowledges thefinancial support through BES-2013-062593. I.C. acknowledges thefinancial support through JAE-Pre-2011 00578., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Geometrically defined spin structures in ultrathin Fe3O4 with bulk like magnetic properties

  • Ruiz-Gómez, Sandra
  • Pérez, Lucas
  • Mascaraque, Arantzazu
  • Quesada, Adrián
  • Prieto, Pilar
  • Palacio, Irene
  • Martín-García, Laura
  • Foerster, Michael
  • Aballe, Lucía
  • de la Figuera, Juan
  • AMPHIBIAN Project ID:720853
We have grown high quality magnetite microcrystals free from antiphase boundaries on Ru(0001) by reactive molecular beam epitaxy, conserving bulk magnetic properties below 20 nm thickness. Magnetization vector maps are obtained by X-ray spectromicroscopy and compared with micromagnetic simulations. The observed domain configurations are dictated purely by shape anisotropy, overcoming the possible influences of (magneto)crystalline anisotropy and defects, thus demonstrating the possibility of designing spin structures in ultrathin, magnetically soft magnetite at will., This work is supported by the Spanish Ministerio de Economía y Competitividad through Projects no. MAT2013-48009-C4-1-P, MAT2014-52477-C5-2-P, MAT2015-64110-C2-1-P, and MAT2015-64110-C2-2-P and by the European Comission through Project H2020 no. 720853 (Amphibian). These experiments were performed at the CIRCE beamline of the ALBA Synchrotron Light Facility. I. P. acknowledges the EU via the innovation program under grant agreement no. 696656 (GrapheneCore1-Graphene-based disruptive technologies)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanostructured ZnO/sepiolite monolithic sorbents for H2S removal

  • Portela, Raquel
  • Rubio Marcos, Fernando
  • Leret, Pilar
  • Fernández Lozano, José Francisco
  • Bañares, Miguel A.
  • Ávila García, Pedro
ZnO presents favorable thermodynamics, equilibrium constant and stability for H2S chemisorption and sepiolite has excellent sorptive and rheological properties to be employed as a support. Four conformed ZnO/sepiolite composites are prepared, two by impregnation in zinc nitrate solution – one using activated carbon as a dispersing and pore generating agent – and two by dry mixing of the clay with dispersed or hierarchically assembled ZnO nanoparticles. The extrudates obtained with a mixture of sepiolite and nanodispersed ZnO particles are the most active for H2S chemisorption in temperature-programmed tests performed in an inert atmosphere, which can be correlated with the higher and homogeneous ZnO dispersion. ZnO sulfidation is reversible in the presence of O2. Thus, the activity can be regenerated, and these materials act as catalysts for H2S to SO2 oxidation in air., The authors would like to express their thanks for financial support to MINECO (Spain) for the projects MAT2013-48009-C4-1-P and CTQ2011-25517-PPQ and the Juan de la Cierva contract of Dr R. Portela (JCI-2010-08221). Dr F. Rubio-Marcos is also indebted to CSIC for a Junta de Ampliación de Estudios contract (JAEDOC071), which is co-financed with FEDER funds., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Europium monoxide nanocrystalline thin films with high near-infrared transparency

  • Mariscal, A.
  • Quesada, Adrián
  • Tarazaga Martín-Luengo, Aitana
  • García García-Tuñón, Miguel Ángel
  • Bonanni, A.
  • Fernández Lozano, José Francisco
  • Serna, Rosalía
5 pags., 3 figs., Nanocrystalline textured EuO thin films are prepared by an oxygen loss process from a pure EuO bulk ceramic target through pulsed laser deposition in vacuum at room temperature. X-ray diffraction spectra evidence a well-defined diffraction peak corresponding to the EuO phase textured along the (1 1 0) direction. Analysis of the XRD peak profile indicates that the films are nanocrystalline (average crystallite size of 11 nm) with a compressive residual strain. The formation of stoichiometric EuO is further confirmed by a strong signal from Eu in the X-ray photoelectron spectra. The complex refractive index in the near infrared has been determined by spectroscopic ellipsometry and shows that the EuO films have a high transparency (k < 10) and a refractive index of 2.1. A band-gap shift of 0.25 eV is found with respect to the EuO bulk. These films, deposited by an accessible and efficient method, open a new route to produce EuO films with optical quality, suitable for NIR optoelectronic components., This work has been financially supported by the Spanish Ministry of Economy and Competitiveness through the projects MINECO/FEDER TEC2015-69916-C2-1-R, MAT2013-47878-C2-1-R and MAT2013-48009-C4-1-P co-funded with FEDER funds. Support by the EC’s Horizon2020 Research and Innovation Programme (grant 645776), by the Austrian Science Fund – FWF (P24471 and P26830), and by the NATO Science for Peace Programme (grant 984735) is acknowledged. A.M. acknowledges the financial support through BES-2013-062593., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring new mechanisms for effective antimicrobial materials: Electric contact-killing based on multiple schottky barriers

  • Lucas-Gil, Eva de
  • Jiménez Reinosa, Julián
  • Neuhaus, Kerstin
  • Vera Londoño, Liliana Patricia
  • Martín-González, Marisol
  • Fernández Lozano, José Francisco
  • Rubio Marcos, Fernando
The increasing threat of multidrug-resistance organisms is a cause for worldwide concern. Progressively microorganisms become resistant to commonly used antibiotics, which are a healthcare challenge. Thus, the discovery of new antimicrobial agents or new mechanisms different from those used is necessary. Here, we report an effective and selective antimicrobial activity of microstructured ZnO (Ms-ZnO) agent through the design of a novel star-shaped morphology, resulting in modulation of surface charge orientation. Specifically, we find that Ms-ZnO particles are composed of platelet stacked structure, which generates multiple Schottky barriers due to the misalignment of crystallographic orientations. We also demonstrated that this effect allows negative charge accumulation in localized regions of the structure to act as “charged domain walls”, thereby improving the antimicrobial effectiveness by electric discharging effect. We use a combination of field emission scanning electron microscopy (FE-SEM), SEM-cathodoluminescence imaging, and Kelvin probe force microscopy (KPFM) to determine that the antimicrobial activity is a result of microbial membrane physical damage caused by direct contact with the Ms-ZnO agent. It is important to point out that Ms-ZnO does not use the photocatalysis or the Zn2+ released as the main antimicrobial mechanism, so consequently this material would show low toxicity and robust stability. This approach opens new possibilities to understand both the physical interactions role as main antimicrobial mechanisms and insight into the coupled role of hierarchical morphologies and surface functionality on the antimicrobial activity., We express our thanks to the MINECO (Spain) Project MAT2013-48009-C4-1-P and the Spanish National Research Council (CSIC) under Project NANOMIND CSIC 201560E068 for financial support. F.R.-M. is also indebted to MINECO for a “Ramon y Cajal” Contract (Ref. RyC-2015-18626), which is cofinanced by the European Social Fund., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI). Proyecto 201560E068, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermoelectric Skutterudite/oxide nanocomposites: Effective decoupling of electrical and thermal conductivity by functional interfaces

  • Moure Arroyo, Alberto
  • Rull Bravo, Marta
  • Abad Mayor, Begoña
  • Campo, Ángel Adolfo del
  • Muñoz Rojo, Miguel
  • Aguirre, Myriam H.
  • Jacquot, Alexandre
  • Fernández Lozano, José Francisco
  • Martín-González, Marisol
Nanocomposites that combine percolated nano-CoSb3 semiconductors with isolated nano-oxide clusters are shown as an effective approach to decouple electrical and thermal conductivity in thermoelectric applications through the formation of functional interfaces. This type of decoupling is very important to increase the Figure of Merit (zT) of thermoelectrics and it is one of the greatest challenges searched by the community. We carry out an innovative synthesis of Skutterudite/oxide nanocomposites in air by high energy milling and sintering by Spark Plasma Sintering, where functional interfaces are developed in situ. A confocal Raman Microscopy study evidences unequivocally the appearance of a space charge layer at the Skutterudite/oxide interfaces characterized by a crystal lattice softening and a surprising enhanced Raman signal. The functional interfaces act as highly effective phonon scattering and trapping centers that highly reduce the thermal conductivity, while a high electrical conductivity is achieved by selective doping the Skutterudite phase. This approach leads to Figures of Merit ca. 1 for Te-doped CoSb3. This work opens up new possibilities for the facile, large scale synthesis of well performing thermoelectric materials for medium range temperatures applications., This work was supported by the European Projects “NEXTEC” FP7-NMP-201-1.2-3 and Thermo-Spintronic FP7-PEOPLE-2011-Marie Curie, CIG project N° 304043.A. M. and J. F. F. are grateful to MICINN project MAT2013-48009-C4-1-P for the financial support provided for this research. M.M.G. wants to acknowledge also the Infante project 201550E072. Dr. Alberto Moure is also indebted to MINECO for the “Ramón y Cajal” contract (Ref. RYC-2013–14436), which is co-financed with European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Large coincidence lattice on Au/Fe3O4 incommensurate structure for spintronic applications

  • Muñoz-Noval, A.
  • Rubio-Zuazo, J.
  • Salas, Eduardo
  • Serrano Rubio, Aída
  • Rubio Marcos, Fernando
  • Castro, Germán R.
The design of metallic hybrid systems for spintronics has been widely studied during the past decade, motivated by the promising technological applications of these materials. Nevertheless, the importance of preserving the native structure and properties of the interfaces is often ignored. Here, we present the fabrication of nanocrystalline Au (0 0 1) onto a single oriented Fe3O4 (0 0 1) thin film as a promising hybrid system to develop spintronic devices by growing Au over the Fe3O4 by using a simple one-pot Pulsed Laser Deposition (PLD) approach. The structural coupling between Au nanocrystals and Fe3O4 layer results in the development of an incommensurate structure based on a coincidence lattice of order 35, which preserves the intrinsic properties of the Au nanocrystals, the Fe3O4 matrix and the interface between them. The general strategy described in the present work preserves the structure and main intrinsic properties of the constituting materials, being a fundamental issue for the future development of spintronic devices., The authors are grateful to the SpLine staff for their valuable help and to the financial support from the Spanish MINECO and Consejo Superior de Investigaciones Cientificas under Grant Nos. MAT2011-23785, MAT2013-48009-C4-1-P and 20106OE013. Dr. F. Rubio-Marcos is also indebted to MINECO for a “Juan de la Cierva> contract (ref: JCI-2012-14521), which is co-financed with FEDER funds.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tribochemical Decomposition of Light Ionic Hydrides at Room Temperature

  • Nevshupa, Roman
  • Ares, Jose Ramón
  • Fernández, José Francisco
  • Campo, Ángel Adolfo del
  • Román García, Elisa Leonor
Tribochemical decomposition of magnesium hydride (MgH2) induced by deformation at room temperature was studied on a micrometric scale, in situ and in real time. During deformation, a near-full depletion of hydrogen in the micrometric affected zone is observed through an instantaneous (t < 1 s) and huge release of hydrogen (3–50 nmol/s). H release is related to a nonthermal decomposition process. After deformation, the remaining hydride is thermally decomposed at room temperature, exhibiting a much slower rate than during deformation. Confocal-microRaman spectroscopy of the mechanically affected zone was used to characterize the decomposition products. Decomposition was enhanced through the formation of the distorted structure of MgH2 with reduced crystal size by mechanical deformation., We acknowledge financial support from the Ministry of Economy and Competitiveness of Spain through the grants RYC-2009-0412, BIA-2011-25653, and IPT-2012-1167-120000 with participation of the European Regional Development Fund (FEDER) as well as MINECO 2011-22780 and MAT2013-48009-C4-1-P.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of x-ray irradiation on Co-phthalocyanine thin films studied by surface plasmon resonance

  • Serrano Rubio, Aída
  • Rodríguez de la Fuente, O.
  • Monton, C.
  • Muñoz-Noval, A.
  • Valmianski, I.
  • Fernández Lozano, José Francisco
  • Castro, Germán R.
  • Schuller, I. K.
  • García García-Tuñón, Miguel Ángel
We explore here the effect of x-ray irradiation (7.7 keV) on Co-phthalocyanine (CoPc) thin films using surface plasmon resonance (SPR). We have found a small and partially reversible modification of the SPR spectra of CoPc in CoPc/Au bilayers upon irradiation. For a beam intensity of ∼10 photons • s • mm and an irradiation time of the order of 1 h, we estimate small variations of the order of ∼1-5% in the refractive index associated with the scattering of the x-rays with the soft matter. A Raman study of the irradiated regions did not show structural modifications, suggesting that the observed variations in the optical properties of the CoPc films are related to modifications of their electronic configuration., This work has been supported by the Spanish Ministerio de Ciencia e Innovación (MICINN) through the project Nos. FIS-2008–06249, MAT2009-14578-C03-02 and MAT2013-48009-C4-1-P. We acknowledge ESRF, The European Synchrotron for provision of synchrotron radiation facilities and the Spanish Ministerio de Economía y Competitividad (MECC) and Consejo Superior de Investigaciones Científicas (CSIC) for financial support (PE-2010 6 0E 013) and for provision of synchrotron radiation facilities. The research at UCSD was supported by the Office of Basic Energy Science, U.S. Department of Energy, BES-DMS funded by the Department of Energy's Office of Basic Energy Science, DMR under grant DE FG02 87ER-45332.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Inter-grain effects on the magnetism of M-type strontium ferrite

  • Céspedes, Eva
  • Rodriguez-Rodriguez, G.
  • Navío, C.
  • Osorio, M. R.
  • Guerrero, R.
  • Pedrosa, F. J.
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Fernández, J. F.
  • Quesada, Adrián
  • Camarero, J.
  • Bollero, A.
By using films as model systems, a combined study based on experiments and micromagnetic simulations has been performed to get further insight into the magnetic behaviour of M-type SrFeO (SrF) system in the nanosized range. Both nanocrystalline SrF quasi-isotropic and highly anisotropic films have been obtained by sputtering. Tuning of the preferred c-axis orientation, either normal or in the film plane, has been possible by varying the growth parameters and, importantly, with no need of any underlayer. Small changes in the oxygen ratio (up to 2%) and in-situ heating lead to different microstructure, which determine the strong variations of the magnetic behaviour observed, including both magnetization curves, easy axis directions, and their different coercive fields, which vary from 1 kOe to 5 kOe within the sample series. Micromagnetic simulations reproduce the experiments with a model based on a mixed population of randomly distributed SrF grains with in-plane and out-of-plane uniaxial anisotropies. The simulations show that intergranular interactions play the major role on the coercive field behaviour of the SrF system. A microstructure comprising largely uncoupled grains leads to improved magnetic performance of highly c-axis oriented SrF nanostructures., This research has been supported by EU-FP7 NANOPYME Project (No. 310516), MINECO (Ministerio de Economía y Competitividad): ENMA project (MAT2014-56955-R), project MAT2013-48009-C4-1-P, MAT2014-52405-C2-2-R, M-era.Net Programme: NEXMAG project (PCIN-2015-126) and Regional Government (Comunidad de Madrid): NANOFRONTMAG (Ref. S2013/MIT-2850). E.C. acknowledges MINECO for the Formación Posdoctoral (JdC) program (FPDI-2013-16008).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Preparation, thermal and phase evolution and functional properties of non-stoichiometric strontium-doped lanthanum manganite perovskite ceramics

  • Colomer, María T.
  • Ortiz, A.L.
  • López-Domínguez, V.
  • Alonso, José M.
  • García García-Tuñón, Miguel Ángel
Powders of (LaSr)MnO (LSM85) and (LaSr)MnO (LSM80) perovskites have been synthesized and characterized in detail, and then sintered to evaluate their electrical and magnetic properties at low temperatures and at near room temperature. Microstructural observations/analyses after the dilatometric essays show that the perovskites have compositions that deviate from the nominal ones. Furthermore, magnetic characterization of both samples reveals a ferromagnetic behavior with a Curie temperature above 300 K for LSM80 and of 260 K for LSM85. In addition, LSM85 is insulator from 15 up to 300 K, whereas LSM80 is metallic up to 160 K and insulator up to 300 K. This significant discrepancy of behaviour is attributable to structural and compositional differences between the two perovskites., This work was supported by MINECO (Government of Spain) under Grants no. MAT2012-31090, MAT2013-48009-C4-1 and MAT2016-78700-R and MINECO and Feder Funds under Grant no. MAT2013-41012-P. Financial support from a 2016 BBVA Foundation Grant for researchers and culture creators is also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Materiales jerarquizados de ZNO para potenciar la respuesta antimicrobiana

  • Lucas-Gil, Eva de
[EN] The last few years concern about the inadequate use of the antimicrobial agents is provoking a growing threat of resistant organisms to these antibiotics. Innovation in action mechanisms is key issue in obtaining new effective antimicrobial agents. Here, the guidelines for inhibiting, enhancing and/or combining chemical and physical interactions in the antimicrobial response of the material through morphological modulation are established. Understanding the existing role between morphology and antimicrobial activity opens the gate to a future generation of antimicrobial agents with tuned action mechanisms to combat resistant microorganisms., [ES] La preocupación de los últimos años sobre el uso inadecuado de los agentes antimicrobianos está provocando una creciente amenaza de organismos resistentes a estos antibióticos. Un punto clave en la obtención de nuevos agentes antimicrobianos efectivos es la innovación en los mecanismos de acción. En este trabajo se establecen las pautas para inhibir, potenciar y/o combinar las interacciones químicas y físicas en la respuesta antimicrobiana del material mediante la modulación morfológica. La comprensión del rol que existe entre la morfología y la actividad antimicrobiana abre la puerta hacia una generación futura de agentes antimicrobianos con mecanismos de acción sintonizados para combatir los microorganismos resistentes., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Opening a New Gate to Glass Preservative with Long-Lasting Antimicrobial Activity as Replacement of Parabens

  • Lucas-Gil, Eva de
  • Rubio Marcos, Fernando
  • Leret, Pilar
  • Motos-Pérez, Blanca
  • Monte-Serrano, Mercedes
  • Menéndez, Javier
  • Fernández Lozano, José Francisco
In the past few years, the rapid and continuing emergence of antibiotic resistance for microbial pathogens has questioned the future utilization of antibiotics. Thus, the discovery of new antimicrobials is highly desired to fight microorganisms with multidrug-resistant capability. Here, we have used an inorganic UV filter as a model system to investigate the behavior of a new preservative, based on Ag-Zn cations, to replace parabens in sunscreens. The new glass preservative is incorporated into the UV filter composite by using an easy and ecofriendly method based on a dry nanodispersion. The Challenge Test clearly demonstrates a robust toxicity toward microorganisms, both the resistant bacteria and the fungi. This stimulant behavior can be explained by coupling between the antimicrobial activity of the Ag and the antifungal activity of Zn. Importantly, leaching assays show that the controlled released of these cations over time results in a long-lasting antimicrobial property, pointing out that this material is a promising paraben-free candidate., The authors express their thanks to the MINECO (Spain) project MAT2013-48009-C4-1-P for their financial support. Dr. F. Rubio-Marcos is also indebted to MINECO for a ‘‘Juan de la Cierva’’ contract (ref: JCI-2012-14521), which is co-financed with European Social Fund. Dr. P. Leret is also indebted to MINECO for a “Torres Quevedo” contract (ref: PTQ-12-05470), which is co-financed with European Social Fund. Dr. B. Motos-Pérez is also indebted to MINECO for a “Torres Quevedo” contract. Finally, authors are grateful to Ismael Santamaria for his assistance in the preparation of the compositions, to Luis Contreras for thermal measurements and to Mª José Velasco and Pilar Ortega for ICP-AES measurements, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

One more step against nanotoxicity: Hierarchical particles designed to antifungal properties

  • Lucas-Gil, Eva de
  • Fernández Lozano, José Francisco
  • Rubio Marcos, Fernando
The interest that awakens the ZnO as material is greatly extended both by its unique properties as by its wide variety of applications. Within these applications, antimicrobial activity is gaining relevance. Especially, the bactericidal activity of ZnO nanoparticles is outstanding but little is known about antifungal activity. In addition, the recent discussion about the potential toxicity of nanoparticles and their massive use places them in the spotlight. In response to this emerging problem, a simple and general approach to synthesize hierarchical structure of ZnO is reported. A formation mechanism of these surprising structures is proposed. Moreover, the obtained zinc oxide hierarchical particles improves the antifungal activity towards Aspergillus niger in contrast to ZnO micro or nanoparticles. Due to surprising results, the different action mechanisms of ZnO hierarchical particles against fungi are studied. Thus, we pose a novel physical mechanism by which ZnO hierarchical particles achieve excellent fungicidal results., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) under projects MAT2013-48009-C4-1-P. The Spanish National Research Council (CSIC) under project NANOMIND CSIC 201560E068. Dr. F. Rubio-Marcos is also indebted to MINECO for a “Juan de la Cierva” contract (ref: JCI-2012-14521), which is co-financedwith FEDER funds F. R-Mis also indebted toMINECO for a ‘Ramon y Cajal’ contract (ref: RyC-2015-18626),which is co-financed by the European Social Fund. Finally, the authors are grateful to Mercedes Monte-Serrano, Santiago De-Bernardi and Javier Menéndez for antimicrobial activity test., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

2D particles forming a nanostructured shell: A step forward cool NIR reflectivity for CoAl2O4 pigments

  • Álvarez-Docio, Carmen M.
  • Jiménez Reinosa, Julián
  • Campo, Ángel Adolfo del
  • Fernández Lozano, José Francisco
Blue CoAlO are inorganic pigments with impressive optical effects and a high chemical stability. However, this spinel type structure has two main drawbacks: cobalt is scarce and expensive, and the dark pigment absorbs the solar spectra resulting in undesirable heating. In this work a new type of cool NIR blue pigment is attained by in-situ forming of a shell of 2D CoAlO nanoparticles on α-AlO microparticles. Nanodispersion of CoO nanoparticles on the surface of α-AlO microparticles has been carried out by means of a low energy dry mixing method and further in-situ thermal treatment at 1200 °C forms a nanostructured shell. CoAlO nanocrystals are controlled in size by the frequency site of the previously dispersed CoO nanoparticles. 2D particles form to fill the distance between CoO nanoparticles on the alumina surface. The new shell structure makes it possible to obtain a high efficient NIR pigment with a solar reflectance SR>70% and a large cobalt content reduction. A sample containing only 10 wt% of cobalt shows similar chromatic coordinates to standard bulk pigments, which means a significant saving of raw materials., The authors express their thanks to the MINECO (Spain) project MAT2013-48009-C4-1-P for their financial support. C.M.D. is also indebted to MINECO for a Predoctoral Grant (BES-2014-069779), which is co-financed with FEDER funds.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Revealing the Role of the Intermediates during the Synthesis of BaTi5O11

  • Álvarez-Docio, Carmen M.
  • Jiménez Reinosa, Julián
  • Canu, Giovanna
  • Buscaglia, Marría Teresa
  • Buscaglia, Vincenzo
  • Fernández Lozano, José Francisco
[EN] BaTiO has been extensively studied because of their microwave dielectrics properties. Traditionally, it is difficult to achieve this material as single-phase. Here, we report an effective method to obtain BaTiO powder with nanometer-scale crystals, by solid-state reaction at moderate temperatures and using as precursors nanostructured particles consisting of BaTiO and TiO. The main advantage is the intimate contact between the BaTiO and TiO that ensure, when the solid-state reaction takes place, the formation of complex solid compounds from three or more constituents. The formation mechanism of BaTiO has been studied as a function of both the thermal treatment and the time reaction. The reaction was monitored by Raman spectroscopy combined with Confocal microscopy, the aim of this characterization technique is to provide the description of the general strategy and design principles to obtain BaTiO powder. Consequently, this work is a challenging task for the compositional and structural study of complex inorganic nanoparticles., The authors express their thanks to the projects NANOMIND CSIC201560E068 and MAT2017-86450-C4-1-R for their financial support. C.M.A.-D. is also indebted to MINECO for a Predoctoral Grant (BES-2014-069779), which is cofinanced with FEDER funds. C.M.A.-D. is grateful to MINECO for a short stay scholarship (EEBB-I-16-11587).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancement of UV absorption behavior in ZnO-TiO2 composites, Mejora del comportamiento de absorción de UV en materialescompuestos ZnO–TiO2

  • Jiménez Reinosa, Julián
  • Leret, Pilar
  • Álvarez-Docio, Carmen M.
  • Campo, Ángel Adolfo del
  • Fernández Lozano, José Francisco
[EN] The ultraviolet-visible, UV-vis, absorption edge behaviour of semiconductor oxides as TiO and ZnO promotes their use as inorganic UV filters for sunscreens. In cosmetics, the use of nanoparticles is favoured because of their higher yield and lower whiteness. However, the particle size effect in the UV absorption is unclear. For this reason, the performances of nano and microsized TiO and ZnO are evaluated in both the UV-vis spectroscopy and the Sun Protection Factor, SPF, value. In order to cover the UV range completely by using inorganic filters a new composite is attempted by dry nanodispersion methodology in which TiO nanoparticles are dispersed onto ZnO microparticles. The new composite shows superior UV absorbing properties and ca. 60% SPF value due to a synergism between components that resulted in extended UV coverage and reduction of the total amount of nanoparticles required in the sunscreens. In addition, nanoparticles are effectively anchored onto microparticles avoiding the presence of free nanoparticles., [ES] El comportamiento del borde de absorción ultravioleta-visible de óxidos semiconductorescomo el TiO2y el ZnO incentiva su uso como filtros inorgánicos para luz UV en cremassolares. En cosmética, el uso de nanopartículas está favorecido por el alto rendimiento quepresentan y la baja blancura que aportan a la crema en comparación con las micropartícu-las. Aun así, el efecto del tama˜no de partícula en la absorción de luz en el rango UV no estáclaro. Por esta razón, el comportamiento de nano y micropartículas de TiO2y ZnO se evalúamediante espectroscopia de luz UV-Visible y mediante el factor de protección solar en cre-mas. Con el fin de cubrir las necesidades de absorción de luz en todo el rango UV medianteel uso de filtros inorgánicos, se ha generado un nuevo composite mediante un proceso denanodispersión en seco en el que nanopartículas de TiO2se encuentran dispersas sobre micropartículas de ZnO. El nuevo composite presenta propiedades de absorción UV superiores al 60% en lo que al valor de protección solar se refiere. Este hecho es debido a la sinergia entre los componentes de forma que se cubre el rango UV de manera efectiva requiriendo una menor cantidad total de nanopartículas. Dichas nanopartículas se encuentran dispersas de manera efectiva sobre las micropartículas, evitando la presencia de nanopartículas libres., The authors express their thanks to the MINECO project MAT2013-48009-C4-1-P for their financial support. P. Leret is indebted to MINECO for a “Torres Quevedo” contract (ref: PTQ-12-05470) and C.M. Alvarez-Docio for a FPI grant, which areco-financed with FEDER funds.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pt-free CoAl2O4catalyst for soot combustion with NOx/O2

  • Álvarez-Docio, Carmen M.
  • Portela, Raquel
  • Jiménez Reinosa, Julián
  • Rubio Marcos, Fernando
  • Granados-Miralles, Cecilia
  • Pascual, Laura
  • Fernández Lozano, José Francisco
[EN] Cobalt aluminate spinel compounds prepared by different methods were characterized in terms of crystallinestructure, morphology, textural properties and acidity, and evaluated as catalysts for diesel soot combustion inNOx/O2mixtures. The activation of commercial CoAl2O4microparticles by ball milling reduced the onsettemperature of this material considerably and yielded an efficient catalyst for soot combustion that exhibited atemperature of half conversion, 411 °C, similar to that obtained with the reference Pt/Al2O3catalyst. Moreover,like Pt, the milled CoAl2O4suppressed the CO formation observed in non-catalytic soot combustion. The sig-nificant modification of the particle size, the emergence of new exposed crystal facets and the creation of defectsare responsible for the appearance of new active sites and high acidity that improved catalyst-to-soot contact andreactivity. Thefindings open a new gate toward the use of efficient Pt-free catalyst for soot combustion., The authors express their thanks to the project NANOMINDCSIC201560E068 and MAT2017-86450-C4-1-R for their financial support. C.M. Alvarez-Docio for a FPI grant BES-2014-069779, which are co-financed with FEDER funds. F.Rubio-Marcos is indebted to MINECO for a ‘Ramon y Cajal’ contract (ref: RyC-2015-18626), which is co-financed by the European Social Fund. F. Rubio-Marcos also acknowledges support from a 2018 Leonardo Grant for Researchers and Cultural Creators (BBVA Foundation)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación

Performance and Stability of Wet-Milled CoAl2O4, Ni/CoAl2O4, and Pt,Ni/CoAl2O4 for Soot Combustion

  • Álvarez-Docio, Carmen M.
  • Portela, Raquel
  • Jiménez Reinosa, Julián
  • Rubio Marcos, Fernando
  • Pascual, Laura
  • Fernández Lozano, José Francisco
[EN] Low-energy wet milling was employed to activate commercial CoAl2O4 spinel and disperse mono- and multimetallic nanoparticles on its surface. This method yielded efficient Pt,Ni catalysts for soot oxidation in simulated diesel exhaust conditions. The characterization and activity results indicated that although Ni/CoAl2O4 was highly active, the presence of Pt was required to obtain a stable Ni(0.25 wt. %),Pt(0.75 wt. %)/CoAl2O4 catalyst under the operating conditions of diesel particulate filters, and that hot spots formation must be controlled to avoid the deactivation of the cobalt aluminate. Our work provides important insight for new design strategies to develop high-efficiency low-cost catalysts. Platinum-containing multimetallic nanostructures could efficiently reduce the amount of the costly, but to date non-replaceable, Pt noble metal for a large number of industrially important catalytic processes, This research was funded by CSIC, NANOMIND project number CSIC201560E068, and the Spanish Government, grant number MAT2017-86450-C4-1-R projects. C.M.A.-D. received financial support from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) for an FPI grant BES-2014-069779, which is co-financed with FEDER funds. F.R.-M. is indebted to MINECO for a ‘Ramon y Cajal’ contract (ref: RyC-2015-18626), which is co-financed by the European Social Fund. F.R.-M. also acknowledges support from a 2018 Leonardo Grant for Researchers and Cultural Creators (BBVA Foundation).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Formation of a magnetite/hematite epitaxial bilayer generated with low energy ion bombardment

  • Ruiz-Gómez, Sandra
  • Serrano Rubio, Aída
  • Carabías, I.
  • García García-Tuñón, Miguel Ángel
  • Hernando, A.
  • Mascaraque, Arantzazu
  • Pérez, L.
  • González Barrio, Miguel Ángel
  • Rodríguez de la Fuente, Óscar
6 pags, 4 figs., We have used a low-energy ion bombardment to fabricate an epitaxial single-crystalline magnetite/hematite bilayer grown on Au(111). This non-conventional fabrication method involves the transformation of the upper layers of a single-crystalline hematite thin film to single-crystalline magnetite, a process driven by the preferential sputtering of oxygen atoms and favoured by the good structural matching of both phases. We show the reversibility of the transformation between hematite and magnetite, always keeping the epitaxial and single-crystalline character of the films. The magnetic characterization of the bilayer grown using this method shows that the magnetic response is mainly determined by the magnetite thin film, exhibiting a high coercivity., This work was supported by projects MAT2012-38045-C04-03, FIS2014-61839-EXP, MAT2014-52477-C5-2-P and MAT2013-48009-C4-1-P from the Spanish Ministry of Economy and Competitiveness and a 2016 BBVA Foundation Grant for Researchers and Cultural Creators. S.R.-G. thanks a FPI MINECO fellowship. J. Romero from the C.A.I de Tecnicas Fisicas-UCM is acknowledged for the SQUID measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Feasible integration in asphalt of piezoelectric cymbals for vibration energy harvesting

  • Moure Arroyo, Alberto
  • Izquierdo Rodríguez, M.A.
  • Hernández Rueda, S.
  • Gonzalo, A.
  • Rubio Marcos, Fernando
  • Urquiza Cuadros, D.
  • Pérez-Lepe, A.
  • Fernández Lozano, José Francisco
[EN] Piezoelectric cymbals with 29-mm diameter and different configurations are fabricated and tested to determine the best conditions to optimize the conversion of mechanical to electric energy. Then, the ones with the best results are integrated directly in asphalt to evaluate their performance as vibration energy harvesters in roads, in a test bench designed to characterize these parameters. The main cymbal parameters and their integration in the asphalt are determined. For the first time, the electrical energy that can be obtained with the embedment of cymbals in asphalt is evaluated. Each single piezoceramic cymbal recovers up to 16 μW for the pass of one heavy vehicle wheel. An extrapolation of the energy transformed by the integrated cymbals in roads with high vehicle densities, such as in a peri-urban motorway, is approached. Energy densities in the range of 40-50 MW h/m can be obtained at 100 m of road (use of 30,000 cymbals), which could account for more than 65 MW h in a year. All this with a relatively low cost for an emerging technology (less than 2 €/kW h). The conversion of wasted and unused vibrational energy in roads by piezoelectric cymbals is thus proved as a real possibility of energy harvesting., MINECO project MAT2013-48009-C4-1-P for the financial support provided for this research. Dr. F. Rubio-Marcos is also indebted to CSIC for a “Junta de Ampliación de Estudios” contract (ref. JAEDOC071), which is co-financed with FEDER funds. Dr. Alberto Moure is also indebted to MINECO for the “Ramón y Cajal” contract (Ref. RYC-2013-14436).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Energy product enhancement in imperfectly exchange-coupled nanocomposite magnets

  • Quesada, Adrián
  • Granados-Miralles, Cecilia
  • López-Ortega, Alberto
  • Erokhin, Sergey
  • Lottini, Elisabetta
  • Pedrosa, Javier
  • Bollero, Alberto
  • Aragón Sánchez, Ana María
  • Rubio Marcos, Fernando
  • Stingaciu, Marian
  • Bertoni, Giovanni
  • Julián Fernández, César de
  • Sangregorio, Claudio
  • Fernández Lozano, José Francisco
  • Berkov, Dmitry
  • Christensen, Mogens
[EN] Interfacial exchange coupling is known to improve the permanent magnetic performance (i.e., maximal energy product) in composites of magnetically hard and soft particles. The prevailing strategy, employed in a plethora of compositions, consists in maximizing the coupling between the hard and soft phases and optimizing material parameters such as particle size or phase composition. In CoFeO–FeCo nanocomposites, it is experimentally shown that interparticle uncoupling in combination with the sizes of the soft phase grains below the single-domain threshold leads to enhanced magnetic properties at room temperature, while maximizing exchange coupling implies a collapse in coercivity and hence in the maximal energy product. The results are corroborated by micromagnetic calculations and the origin of the exchange-induced softening is discussed. It is emphasized that engineering interfaces in order to optimize, rather than maximize, the degree of exchange coupling are a necessary requirement to improve the energy product in nanocomposite magnets and to successfully develop advanced rare-earth-free permanent magnets., Financial support from the European Commission through the project NANOPYME FP7-NMP-2012-SMALL-6 NANOPYME (n° 310516), and from the Spanish Ministerio de Economía y Competitividad through Project MAT2013-48009-C4-1-P. F.R.M. is also indebted to MINECO for a ‘‘Juan de la Cierva’’ contract (ref: JCI-2012-14521), which is co-financed with European Social Found.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of the oxidizing agent to complete the synthesis of strontium aluminate based phosphors by the combustion method

  • Rojas-Hernández, Rocío E.
  • Rodríguez Barbero, Miguel Ángel
  • Fernández Lozano, José Francisco
The influence of processing parameters on the phase formation of strontium aluminates doped with Eu2+ and Dy3+ by the combustion method has been evaluated. The addition of a slight excess of urea as a fuel has an important effect on the phase formation, but a larger amount of urea inhibited the strontium incorporation into the stuffed tridymite-like structure. The experimental results show that it is possible to incorporate a larger amount of urea than the theoretical one by adding nitric acid as an oxidizing agent. The presence of an oxidizing agent promotes both effective chelation of the cations and a higher crystalline order on strontium aluminate. Nanostructured lamellar particles have been obtained in a single step and the particles are well crystallized. The combustion method avoids the standard requirements of post-thermal treatments in a reducing atmosphere to promote the appearance of Eu2+ cations. A higher amount of urea in the presence of the oxidizing agent produces strontium aluminate particles with higher phosphorescence brightness, owing to the increase of the reduction process Eu3+ to Eu2+. The luminescence properties correlate with the crystallite size of the strontium aluminate. The results demonstrate a pathway to obtain phosphorescent pigments with sizes down to 10 μm. © The Royal Society of Chemistry 2015., The authors express their thanks to the MICINN (Spain) project MAT2013-48009-C4-1-P for their financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ferroelectric domain wall motion induced by polarized light

  • Rubio Marcos, Fernando
  • Campo, Ángel Adolfo del
  • Marchet, Pascal
  • Fernández Lozano, José Francisco
Ferroelectric materials exhibit spontaneous and stable polarization, which can usually be reoriented by an applied external electric field. The electrically switchable nature of this polarization is at the core of various ferroelectric devices. The motion of the associated domain walls provides the basis for ferroelectric memory, in which the storage of data bits is achieved by driving domain walls that separate regions with different polarization directions. Here we show the surprising ability to move ferroelectric domain walls of a BaTiO₃ single crystal by varying the polarization angle of a coherent light source. This unexpected coupling between polarized light and ferroelectric polarization modifies the stress induced in the BaTiO₃ at the domain wall, which is observed using in situ confocal Raman spectroscopy. This effect potentially leads to the non-contact remote control of ferroelectric domain walls by light., We thank the MINECO (Spain) project MAT2013-48009-C4-1-P for their financial support. F.R.M. is also indebted to MINECO for a ‘Juan de la Cierva’ contract (ref: JCI-2012-14521), which is co-financed with FEDER funds. We acknowledge Dr Adrian Quesada for scientific and technical advice., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Initial Stages of the Growth of Mixed Iron-cobalt Oxides on Ru(0001)

  • Martín García, Laura|||0000-0001-5743-4473
  • Quesada, Adrian
  • Pérez, Lucas|||0000-0001-9470-7987
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Figuera, Juan de la|||0000-0002-7014-4777
Mixed iron-cobalt oxides have been grown on a Ru(0001) single crystal substrate by reactive molecular beam epitaxy. The growth has been followed by low-energy electron microscopy and diffraction. Chemical characterization has been performed by selected area x-ray absorption spectroscopy. As previously known, iron grows into a wetting layer of FeO. In contrast, cobalt grows into three-dimensional islands of CoO, of either with a (111) -most common- or a (100) orientation. For mixed compositions, flat 2D growth is regained. Depending on temperature, either segregation into two FeCo compositions or a single phase is detected. In all cases the structure corresponds to an in-plane expanded (111)-oriented halite one. When only one phase is observed or for the Co-rich phase in the two phase film, its crystal structure is rotated by 30° relative to the Ru substrate, unlike the Co-poor phase which appears aligned with the substrate.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mössbauer and magnetic properties of coherently mixed magnetite-cobalt ferrite grown by infrared pulsed-laser deposition

  • Figuera, Juan de la|||0000-0002-7014-4777
  • Quesada, Adrian
  • Martín García, Laura|||0000-0001-5743-4473
  • Sanz, Mikel
  • Oujja, Mohamed|||0000-0003-3757-4043
  • Castillejo, Marta
  • Mascaraque, Arantzazu
  • N'Diaye, Alpha T.|||0000-0001-9429-9776
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Marco, José F.
We have studied the magnetic properties and the composition of cobalt ferrite single crystal films on SrTiO: Nb grown by infrared pulsed-laser deposition. Mössbauer spectra have been recorded from both the target used to grow the films and the films themselves. The Mössbauer spectra of the target taken at low temperatures show a strong dependence of the recoil free fraction of the octahedral sites with temperature. The films composition, with a coexistence of Co-enriched cobalt ferrite and magnetite, has been estimated assuming a similar ratio of the recoil free fractions of the films. X-ray absorption and x-ray magnetic circular dichroism measurements confirm the valence composition of the film and show ferromagnetic Fe-Co coupling in the films with a coercive field around 0.5 T at room temperature. The combination of these characterization techniques allows establishing the coherent structural and magnetic properties of this biphase system.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Geometrically defined spin structures in ultrathin Fe3O4 with bulk like magnetic properties

  • Ruiz-Gómez, Sandra|||0000-0002-9665-2059
  • Pérez, Lucas|||0000-0001-9470-7987
  • Mascaraque, Arantzazu
  • Quesada, Adrian
  • Prieto Recio, Pilar|||0000-0001-8978-5139
  • Palacio, Irene|||0000-0002-3345-4848
  • Martín García, Laura|||0000-0001-5743-4473
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Figuera, Juan de la|||0000-0002-7014-4777
We have grown high quality magnetite microcrystals free from antiphase boundaries on Ru(0001) by reactive molecular beam epitaxy, conserving bulk magnetic properties below 20 nm thickness. Magnetization vector maps are obtained by X-ray spectromicroscopy and compared with micromagnetic simulations. The observed domain configurations are dictated purely by shape anisotropy, overcoming the possible influences of (magneto)crystalline anisotropy and defects, thus demonstrating the possibility of designing spin structures in ultrathin, magnetically soft magnetite at will.