Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Robust anti-icing superhydrophobic aluminum alloy surfaces by grafting fluorocarbon molecular chains

  • Rico, V.
  • Mora, Julio
  • García, Paloma
  • Agüero, Alina
  • Borrás, A.
  • González Elipe, A.R.
  • López-Santos, C.
Infusion of low surface tension liquids in nanostructured surfaces is currently used to promote an anti-icing response, although the long term stability of these systems is often jeopardized by losses of the infused liquid. In this work, we propose an alternative to the infusion procedure to induce a more effective and long lasting anti-icing capacity. The method consists of a combination of surface nanostructuration with the chemical grafting of fluorocarbon molecules. Al6061 substrates have been subjected to laser roughening and further modified with a nanostructured Al2O3 thin film to achieve a dual roughness and porous surface state. These surfaces have been subjected to a grafting treatment with perfluorooctyltriethoxysilane (PFOTES) vapor or, for comparative purposes, infused with a low surface tension liquid. A comparative analysis of the wetting, water condensation and anti-icing properties of these two systems showed an outstandingly better performance for the grafted surfaces with respect to the infused ones. Grafted surfaces were markedly superhydrophobic and required higher water vapor pressures to induce condensation. When looking for their anti-icing capacity, they presented quite long freezing delay times for supercooled water droplets (i.e. almost four hours) and exhibited a notably low ice accretion in a wind tunnel test. The high aging resistance and durability of these grafted surfaces and the reproducibility of the results obtained when subjected to successive ice accretion cycles show that molecular grafting is an efficient anti-icing methodology that, in aggressive media, may outperform the classical infusion procedures. The role of the fluorocarbon chains anchored on the surface in inducing an anti-icing functionality is discussed., This work has been carried out with the support of the EU project PHOBIC2ICE (ref 690819). The authors want to specially thank Airbus Group Innovations DE, Concordia Institute of Aerospace Design & Innovation of Concordia University and Department of Engineering Physics of Polytechnique Montreal for, respectively, the rain erosion, thermal cycling and sand erosion tests carried out within the frame of this project. The authors also thank the European Regional Development Funds program (EU-FEDER) and the MINECO-AEI (MAT2016-79866-R, PID2019-109603RA-I00, PID2019-110430GB-C21 and CSIC 201860E050) for financial support. CLS thanks the University of Seville through the VI “Plan Propio de Investigación y Transferencia de la US” (VI PPIT-US).
Docta Complutense
Publicación Artículo científico (JournalArticle)

Thin film nanostructuring at oblique angles by substrate patterning

  • Muñoz Piña, S.
  • Alcaide, A.M.
  • Limones Ahijón, B.
  • Oliva Ramírez, M.
  • Rico, V.
  • Alcalá Penadés, Germán
  • González, M.U.
  • García Martín, J.M.
  • Álvarez, R.
  • Wang, D.
  • Schaaf, P.
  • González Elipe, A.R.
  • Palmero, A.
It is demonstrated that, besides classical nanocolumnar arrays, the oblique angle geometry induces the growth of singular structures in the nanoscale when using wisely designed patterned substrates. Well-ordered array of crosses, cylindrical nanorods or hole structures arranged in square or hexagonal regular geometries are reported as examples, among others. The fundamental framework connecting substrate topography and film growth at oblique angles is presented, allowing the use of substrate patterning as a feasible thin film nanostructuring technique. A systematic analysis of the growth of TiO2 thin films on 4 different lithographic patterned substrates in 4 different scale lengths is also presented. A first conclusion is the existence of a height-based selective growth in the initial stages of the deposition, by which the film preferentially develops on top of the tallest substrate features. This behavior is maintained until the film reaches a critical thickness, the so-called Oblivion Thickness, above which the film topography becomes gradually independent of the substrate features. A general formula relating the spatial features of the pattern, the coarsening exponent and the Oblivion Thickness has been deduced.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anisotropic Resistivity Surfaces Produced in ITO Films by Laser‐Induced Nanoscale Self‐organization

  • López-Santos, Carmen
  • Puerto, D.
  • Siegel, Jan
  • Macías-Montero, M.
  • Florian, Camilo
  • Gil-Rostra, J.
  • López-Flores, Víctor
  • Borrás, Ana
  • González-Elipe, Agustín R.
  • Solís Céspedes, Javier
11 pags., 8 figs., 2 tabs., Highly anisotropic resistivity surfaces are produced in indium tin oxide (ITO) films by nanoscale self‐organization upon irradiation with a fs‐laser beam operating at 1030 nm. Anisotropy is caused by the formation of laser‐induced periodic surface structures (LIPSS) extended over cm‐sized regions. Two types of optimized structures are observed. At high fluence, nearly complete ablation at the valleys of the LIPSS and strong ablation at their ridges lead to an insulating structure in the direction transverse to the LIPSS and conductive in the longitudinal one. A strong diminution of In content in the remaining material is then observed, leading to a longitudinal resistivity ρL ≈ 1.0 Ω·cm. At a lower fluence, the material at the LIPSS ridges remains essentially unmodified while partial ablation is observed at the valleys. The structures show a longitudinal conductivity two times higher than the transverse one, and a resistivity similar to that of the pristine ITO film (ρ ≈ 5 × 10−4 Ω·cm). A thorough characterization of these transparent structures is presented and discussed. The compositional changes induced as laser pulses accumulate, condition the LIPSS evolution and thus the result of the structuring process. Strategies to further improve the achieved anisotropic resistivity results are also provided., This research was funded by the Spanish Ministry of Science, Innovation and Universities, the Spanish Research Agency (AEI, Ministry of Research and Innovation), and the European Regional Development Fund (ERDF) (grant numbers TEC2017-82464-R, PID2019-109603RA-I00, and PID2019- 110430GB-C21), the “Consejería de Economía y Conocimiento de la Junta de Andalucía” (PAIDI-2020 projects P18-RT-3480 and -6079). The authors also acknowledge the Consejo Superior de Investigaciones Científicas for the “Intramural Project” (201850E057). C.L.-S. acknowledges the funding of the University of Seville through the “VI Plan Propio de Investigación y Transferencia de la US” (VI PPIT-US). M.M.-M. acknowledges the postdoctoral Juan de la Cierva Incorporación grant (IJCI-2017-33317)) of the same ministry. C.F. thanks the support from the European Commission through the Marie Curie Global Fellowship grant number 844977. V.L.-F. thanks the support from European Commission/Junta de Andalucía Talent-Hub Program. The authors thank the Research, Technology, and Innovation Center of the University of Seville (CITIUS) and Microscopy Service of the University Pablo de Olavide (Seville) for access to several material characterization facilities, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel procedure for studying laser-surface material interactions during scanning laser ablation cleaning processes on Cu-based alloys

  • Di Francia, Elisabetta
  • Lahoz, Ruth
  • Neff, Delphine
  • Rico, Víctor J.
  • Nuns, Nicolás
  • Angelini, Emma
  • Grassini, Sabrina
Laser ablation is an effective method to clean Cu-based alloys. A novel procedure of characterisation was developed involving O isotopes evaluated by ToF-SIMS spectroscopy to assess the driving mechanisms of laser-surface interactions. The presence of re-oxidised compounds was detected, discerning between the oxygen from the corrosion layer and the one introduced by the interaction with the laser (that was generated in a controlled atmosphere of O diluted in N). A set of samples treated with different laser conditions were characterised by FESEM and μRaman. The results have shown that re-oxidation phenomenon can occur and its selectivity depends on the laser conditions., Dr. R. Lahoz wishes to acknowledge professional support of the CSIC Interdisciplinary Thematic Platform “Open Heritage: Research and Society (PTI-PAIS)”. Dr. E. Di Francia would like to acknowledge the European Federation of Corrosion (EFC) – EUROCORR Young Scientist Grant Selection Committee 2016 that stimulated the initial collaboration that subsequently produced this research. Dr. V. Rico thanks the FEDER program through AEI-MICINN (PID2019-110430GB-C21) and Junta de Andalucía (PAIDI-2020 through project P18-RT-3480) for financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electron beam evaporated vs. magnetron sputtered nanocolumnar porous stainless steel: Corrosion resistance, wetting behavior and anti-bacterial activity

  • Bobaru, Stefania
  • Rico, Víctor J.
  • García-Valenzuela, Aurelio
  • López-Santos, Carmen
  • González-Elipe, Agustín R.
Stainless steel (SS), widely used because of its outstanding corrosion protection properties, does not possess any particular anti-stain or anti-bacterial activity as required for household and sanitary applications. This work reports the fabrication of SS thin films that, keeping a similar corrosion resistance than the bulk material, presents hydrophobicity and anti-bacterial activity. These thin films are prepared at ambient temperature by physical vapor deposition (PVD), either electron beam evaporation (EBE) or magnetron sputtering (MS), at oblique angles (OAD). According to their scanning electron microcopy and atomic force microscopy analysis, the microstructure of the OAD-SS thin films consisted of tilted and separated nanocolumns defining a surface topology that, characterized by a high percentage of void space, varied with the deposition conditions and procedure, either EBE or MS. It has been shown that particularly the nanocolumnar MS-OAD thin films preserved and even improved the high corrosion resistance of compact SS, as determined by electrochemical analysis. Besides, all OAD-SS thin films depict hydrophobicity and a high antibacterial activity. These features, particularly remarkable for the MS-OAD thin films, have been related with their tip-like termination at the surface and the existence of large void spaces separating the nanocolumns. This topology appears to affect negatively the bacteria’s deployment onto the surface and therefore the survival rate. Differences in the corrosion and antibacterial performance between EBE and MS-OAD thin films have been related with the specificities of these two PVD methods of thin film preparation. A relatively high abrasion resistance, as determined by abrasion tests, supports the use of MS-OAD thin films for the protection of commodity materials., Authors thank the FEDER program and AEI-MICINN (PID2019- 110430GB-C21, PID2019-109603RA-I0 and PID2020-112620GB-I00), the Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (PAIDI-2020 through projects US-1263142, ref. AT17-6079, P18-RT-3480), and the EU through cohesion fund and FEDER 2014–2020 programs for financial support. The projects leading to this article have received funding from the EU H2020 Program under the grant agreements 899352 (FETOPEN-01-2018-2019-2020 - SOUNDofICE). One of us (SB) acknowledges the support of the Marie Curie Program of the EU to carry out this work. BSH is acknowledged for having proposed this work and contributed to its realization. CLS thanks the University of Seville through the VI PPIT-US., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thin film nanostructuring at oblique angles by substrate patterning

  • Muñoz-Piña, Sandra
  • Alcaide, Antonio M.
  • Limones-Ahijón, Blanca
  • Oliva-Ramírez, Manuel
  • Rico, Víctor J.
  • Alcalá, Germán
  • González Sagardoy, María Ujué
  • García-Martín, José Miguel
  • Álvarez, Rafael
  • Wang, Dong
  • Schaaf, Peter
  • González-Elipe, Agustín R.
  • Palmero, Alberto
It is demonstrated that, besides classical nanocolumnar arrays, the oblique angle geometry induces the growth of singular structures in the nanoscale when using wisely designed patterned substrates. Well-ordered array of crosses, cylindrical nanorods or hole structures arranged in square or hexagonal regular geometries are reported as examples, among others. The fundamental framework connecting substrate topography and film growth at oblique angles is presented, allowing the use of substrate patterning as a feasible thin film nanostructuring technique. A systematic analysis of the growth of TiO2 thin films on 4 different lithographic patterned substrates in 4 different scale lengths is also presented. A first conclusion is the existence of a height-based selective growth in the initial stages of the deposition, by which the film preferentially develops on top of the tallest substrate features. This behavior is maintained until the film reaches a critical thickness, the so-called Oblivion Thickness, above which the film topography becomes gradually independent of the substrate features. A general formula relating the spatial features of the pattern, the coarsening exponent and the Oblivion Thickness has been deduced., The authors thank the financial support from MCIN/AEI/10.13039/ 501100011033 projects PID2019-110430GB-C21, PID2020-112620GBI00, PID2020-114270RA-I00 and RTI2018-098117-B-C21 (also financed by FEDER Una manera de hacer europa), the Junta de Andalucía (PAIDI- 2020 through projects P18-RT-3480 and P18-RT-6079, and through its 2019 PhD Researcher Hiring Program), the CSIC (2019AEP161 and 201860E050), the Regional Government of Madrid (project IND2017/ IND-7668 and YEI contract PEJ-2019-AI/IND-14451 with support from FSE), the H2020-EU.1.2.1-FET OPEN program (grant 899352, project SOUNDofICE, and the EFRE Infra-Pro project ChAMP), and the University of Seville (VI PPIT-US). The work is supported by the Deutsche Forschungsgemeinschaft (DFG, grant Scha 632/24, “Tailored Disorder” and Scha 632/27, “DFGGer ¨atezentrum”). This work is also supported by the free state of Thuringia under grants 2015 FGI 0025 305 (FastμXRD) and B715-10009 (BioMacroNano2020), all co-financed by the European Union within the framework of the European Regional Development Fund (ERDF). The service from the MiNa Laboratory at IMN-CNM (CSIC), funded from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E- 1794) and EU (FEDER, FSE), is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Compositional gradients at the nanoscale in substoichiometric thin films deposited by magnetron sputtering at oblique angles: A case study on SiOx thin films

  • García-Valenzuela, Aurelio
  • Alcaide, Antonio M.
  • Rico, Víctor J.
  • Ferrer, F. J.
  • Alcalá, Germán
  • Rojas, T. Cristina
  • Álvarez, Rafael
  • González-Elipe, Agustín R.
  • Palmero, Alberto
We demonstrate the existence of stoichiometric variations at the nanoscale when growing nanocolumnar SiO thin films by reactive magnetron sputtering deposition at oblique angles. Results show stoichiometric variations in the range 0.3 < x < 1.3 when growing a SiO thin film. This agrees with results from a numerical growth model that obtains a shift of the stoichiometry in all nanocolumns from lower values at the side facing the Si target to higher values at the opposite side. The different momentum distribution of the gaseous reactive and sputtered species results in preferential incorporation of the latter at a particular side of the nanocolumns. The general occurrence of this mechanism during the reactive magnetron sputtering deposition of substoichiometric thin films at oblique angles is discussed., The authors thank the FEDER program through AEI-MICINN (PID2019-110430GB-C21) and the Junta de Andalucía (PAIDI-2020 through projects P18-RT-3480 and P18-RT-6079), the CSIC (2019AEP161 and 201860E050), the Regional Government of Madrid (project IND2017/IND-7668), the Spanish Ministry of Science and Innovation (PID2020-112620GB-I00, RTI2018-098117-B-C21, and PID2020-114270RA-I00), the H2020-EU.1.2.1-FET OPEN program (grant 899352, project SOUNDofICE, and the EFRE Infra-Pro project ChAMP), and the University of Seville (V and VI PPIT-US) for financial support. We also acknowledge the Centro Nacional de Aceleradores (CNA) for its support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparative analysis of the germination of barley seeds subjected to drying, hydrogen peroxide, or oxidative air plasma treatments

  • Perea-Brenes, Álvaro
  • Gómez-Ramírez, Ana
  • López-Santos, Carmen
  • Oliva-Ramírez, Manuel
  • Molina Mansilla, Ricardo
  • Cotrino, José
  • García Fernández, José Luis
  • Cantos, Manuel
  • González-Elipe, Agustín R.
17 páginas.- 10 figura.- 1 tablas.- 63 referencias, Acceleration in germination time by 12-24 h for barley seeds treated with atmospheric air plasmas may have a significant economic impact on malting processes. In this study, the increase in germination rate and decrease in contamination level upon plasma treatment could not be directly correlated with any significant increase in the water uptake capacity, except for seeds exposed to mild drying treatment. A variety of germination essays have been carried out with seeds impregnated with an abscisic acid solution, a retarding factor of germination, treated with a peroxide solution, and/or subjected to the plasma and drying treatments. Results suggest that plasma and hydrogen peroxide treatments induce the formation of reactive oxygen and nitrogen species that affects the abscisic acid factor and accelerate the germination rate. ABA factorbarley germinationhydrogen peroxide treatmentplasma surface oxidation, the financial support of the Consejeria de Economia, Conocimiento, Empresas y Universidad de la Junta de Andalucia through first the project US-1381045, and second the US-1380977, as well as the EU through cohesion fund and FEDER 2014-2020 programs for financial support. We also thank the AEI-MICINN (PID2019-110430GB-C21, PID2019-109603RA-10, and PID2020-114270RA-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF (FEDER) A way of making Europe," by the "European Union." The contribution of Arquimea Research for the realization of parts of this study is also acknowledged. We thank Intermalta S.A. for the seeds supply. This article frames within COST Action PIAgri-CA19110, supported by COST (European Cooperation in Science and Technology), . Carmen Lopez-Santos thanks the support of the University of Seville through the VI PPIT-US and the Ramon y Cajal Spanish National programs funded by MCIN/AEI/10.13039/501100011033. Manuel Oliva-Ramirez thanks a contract grant within the Paidi 2020 of the EU social fund-University of Seville. We also thank effusively the support of Dr. Pedro E. Sanchez-Jimenez during the thermogravimetric microbalance experiments., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Fluorescent Cage for Supramolecular Sensing of 3-Nitrotyrosine in Human Blood Serum

  • Pérez-Márquez, Lidia A.
  • Perretti, Marcelle D.
  • García-Rodríguez, Dr. Raúl
  • Lahoz, Dr. Fernando
  • Carrillo Fumero, Romen
3-Nitrotyrosine (NT) is generated by the action of peroxynitrite and other reactive nitrogen species (RNS), and as a consequence it is accumulated in inflammation-associated conditions. This is particularly relevant in kidney disease, where NT concentration in blood is considerably high. Therefore, NT is a crucial biomarker of renal damage, although it has been underestimated in clinical diagnosis due to the lack of an appropriate sensing method. Herein we report the first fluorescent supramolecular sensor for such a relevant compound: Fluorescence by rotational restriction of tetraphenylethenes (TPE) in a covalent cage is selectively quenched in human blood serum by 3-nitrotyrosine (NT) that binds to the cage with high affinity, allowing a limit of detection within the reported physiological concentrations of NT in chronic kidney disease., This work was financially supported by Ministerio de Ciencia e Innovación (PGC2018-094503-B-C21, PID2019-110430GB-C21, PID2019-107335RA-I00 and PGC2018-096880-A-I00 MCIU/ AEI/FEDER, UE) and Gobierno Autónomo de Canarias (ProID2020010067). L.A.P.-M. and M.D.P thanks the ACIISI of the Consejería de Economía, Industria, Comercio y Conocimiento and the European Social Fund (ESF) Canary Islands Integrated Operational Program 2014–2020, Area 3 Priority Theme 74 (85 %), for a predoctoral grant. R.G.R. thanks the EU (ESF) for Ramon y Cajal contract (R. G.-R., RYC-2015-19035). The authors thank Prof. Carlos Perretti V. for his support with the statistical analysis, Prof. Javier Hernandez-Borges for helpful discussions, and “Servicio de análisis y determinación estructural” at IPNA-CSIC, particularly Nieves M. Rodríguez and Manuel Cabrera for their technical support in this research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fluorescent tamoxifen derivatives as biophotonic probes for the study of human breast cancer and estrogen-receptor directed photosensitizers

  • Díaz, Mario
  • Hernández, Dácil
  • Valdés-Baizabal, Catalina
  • Lobo, Fernando
  • Marín, Raquel
  • Canerina-Amaro, Ana
  • Boto, Alicia
  • Lahoz, Fernando
Currently, breast cancer is the most common type of cancer worldwide, being the so-called estrogen receptor (ER) positive the subtype with highest prevalence. For decades, the most successful strategy to prevent recurrence of ER + breast cancers is tamoxifen coadjuvant therapy. However, the involvement of the different estrogen receptors (ERα, ERβ and GPER) and the interaction in their signaling pathways, the evidence for side-effects in chronic tamoxifen treatments, as well as the appearance of tamoxifen-resistant breast cancers, have encouraged the need for novel receptor-targeted fluorescent probes. In line with this, multifunctional antiestrogen conjugates, exhibiting fluorescent properties while retaining the ability to antagonize estrogen actions, have been synthesized and proven to be particularly useful in the study of the molecular biology of ER + breast cancers. These novel fluorescent tamoxifen derivatives (FTDs) exhibit pharmacological features of pure antiestrogens, with similar or even greater affinity for ERα than tamoxifen, inhibit ER-dependent gene transcription and cell proliferation, and are devoid of uterotrophic effects. In the present study we have aim at providing a detailed view of their biophotonic potential, including their spectroscopic properties, their usefulness for fluorescent labelling of cellular compartments and intracellular targets, their application in the identification of non-ER antiestrogen binding sites thought fluorescence competition assays, and finally, in their ability to function as efficient ER-targeted photosensitizers., This work was partly funded by the Spanish AEI-MICINN and EU FEDER (Grant numbers PID2019-110430GB-C21, PID2019-107335RA-I00) and Gobierno Autónomo de Canarias, ACIISI (Grant numbers ProID2020010067 and ProID2020807 010075). F. Lobo and C.V.B. are financed by subsidised contracts from 'Agustín de Betancourt' program (Cabildo de Tenerife, Gobierno de Canarias, Spain). D.H. also acknowledges her current contract (TRANSALUDAGRO) financed by Cabildo de Tenerife, Program TF INNOVA 2016–21 (with MEDI & FDCAN Funds)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Germination and First Stages of Growth in Drought, Salinity, and Cold Stress Conditions of Plasma-Treated Barley Seeds

  • Perea-Brenes, Álvaro
  • García Fernández, José Luis
  • Cantos, Manuel
  • Cotrino, José
  • González-Elipe, Agustín R.
  • Gómez-Ramírez, Ana
  • López-Santos, Carmen
Numerous works have demonstrated that cold plasma treatments constitute an effective procedure to accelerate seed germination under nonstress conditions. Evidence also exists about a positive effect of plasmas for germination under environmental stress conditions. For barley seeds, this work studies the influence of cold plasma treatments on the germination rate and initial stages of plant growth in common stress environments, such as drought, salinity, and low-temperature conditions. As a general result, it has been found that the germination rate was higher for plasma-treated than for untreated seeds. Plasma also induced favorable changes in plant and radicle dimensions, which depended on the environment. The obtained results demonstrate that plasma affects the biochemical metabolic chains of seeds and plants, resulting in changes in the concentration of biochemical growing factors, a faster germination, and an initially more robust plant growth, even under stress conditions. These changes in phenotype are accompanied by differences in the concentration of biomarkers such as photosynthetic pigments (chlorophylls a and b and carotenoids), reactive oxygen species, and, particularly, the amino acid proline in the leaves of young plants, with changes that depend on environmental conditions and the application of a plasma treatment. This supports the idea that, rather than an increase in seed water imbibition capacity, there are clear beneficial effects on seedling of plasma treatments., We acknowledge the financial support of the Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía through first the project US-1381045 and second the US-1380977 as well as the EU through a cohesion fund and FEDER 2014–2020 programs. We also thank the AEI-MICINN (PID2019-110430GB-C21, PID2019-109603RA-I00, PID2020-114270RA-I00, TED2021-130124A-I00, and TED2021-130916B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe” and “NextGenerationEU”/PRTR” by the European Union; AEI. We thank Intermalta S.A. for the seeds supply. This article frames within COST Action PIAgri-CA19110, supported by COST (European Cooperation in Science and Technology), www.cost.eu. C.L.-S. thanks the support of the University of Seville through the VI PPIT-US and the Ramon y Cajal Spanish National programs funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photoelectrochemical Water Splitting with ITO/WO3/BiVO4/CoPi Multishell Nanotubes Enabled by a Vacuum and Plasma Soft-Template Synthesis

  • Gil-Rostra, J.
  • Castillo-Seoane, Javier
  • Guo, Qian
  • Jorge Sobrido, Ana Belén
  • González-Elipe, Agustín R.
  • Borrás, Ana
A common approach for the photoelectrochemical (PEC) splitting of water relies on the application of WO3 porous electrodes sensitized with BiVO4 acting as a visible photoanode semiconductor. In this work, we propose a new architecture of photoelectrodes consisting of supported multishell nanotubes (NTs) fabricated by a soft-template approach. These NTs are formed by a concentric layered structure of indium tin oxide (ITO), WO3, and BiVO4, together with a final thin layer of cobalt phosphate (CoPi) co-catalyst. The photoelectrode manufacturing procedure is easily implementable at a large scale and successively combines the thermal evaporation of single crystalline organic nanowires (ONWs), the magnetron sputtering deposition of ITO and WO3, and the solution dripping and electrochemical deposition of, respectively, BiVO4 and CoPi, plus the annealing in air under mild conditions. The obtained NT electrodes depict a large electrochemically active surface and outperform the efficiency of equivalent planar-layered electrodes by more than one order of magnitude. A thorough electrochemical analysis of the electrodes illuminated with blue and solar lights demonstrates that the characteristics of the WO3/BiVO4 Schottky barrier heterojunction control the NT electrode efficiency, which depended on the BiVO4 outer layer thickness and the incorporation of the CoPi electrocatalyst. These results support the high potential of the proposed soft-template methodology for the large-area fabrication of highly efficient multishell ITO/WO3/BiVO4/CoPi NT electrodes for the PEC splitting of water., The authors thank the project PID2019-110430GB-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe,” by the “European Union”. The authors also want to thank CSIC for its financial support through the Intramural Project 202260E110. The project leading to this article has received funding from the EU H2020 program under the grant agreement 851929 (ERC Starting Grant 3DScavengers). Authors thank the ICMSE services for Electron Microscopy, X-Ray Diffraction and Surface Analysis, and the Center for Bioinnovation (University of Malaga) for the access to FESEM-FIB., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exalted dual-scale surface roughening in laser ablated aluminum capped with a transparent thin film: Wetting and anti-icing behavior

  • Ghemras, Ismail
  • Montes, Laura
  • López-Santos, Carmen
  • González-Elipe, Agustín R.
  • Rico, Víctor J.
Near infrared laser ablation of metals, specifically aluminum, has been systematically applied to generate surface roughness. Very high laser fluences may even lead to a so called “explosive” ablation regime where roughness becomes dramatically enhanced. In the present work we have developed an alternative methodology that, utilizing milder laser irradiation conditions (i.e. laser fluences from 0.37 to 0.72 J/cm2), renders aluminum surfaces with a dual-scale roughness character and Sp parameter values twice or even trice the value found in reference samples. This has been possible for aluminum substrates coated with a highly transparent aluminum oxynitride capping layer. The resulting surfaces, consisting of very rough partially oxidized aluminum with negligible amounts of nitrogen species, resulted highly hydrophobic and depicted long icing delay times as required for anti-icing applications. A correlation has been found between the wetting and anti-icing behaviors, the use of a capping layer and the laser irradiation conditions. To account for this exalted roughening phenomenon, we propose that the transparent capping layer confines the laser energy within the aluminum shallow zones, delays the formation of the plasma plume and produces an enhancement in the aluminum ablation, even at relatively low laser fluences., This work was supported by the General Directorate for Scientific Research and Technological Development (DGRSDT) of the High School Educational and Scientific Research Ministry (MESRS) of Algeria [Grant: P.N.E (2018-2019)]. Also, the project leading to this article has received funding from the EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020 - SOUNDofICE). We also thank the AEI-MICINN (PID2019-110430GB-C21, PID2020-112620GBI00 and PID2019-109603RA-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe,” by the “European Union”. We acknowledge the financial support of the Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía through the project US-1381045 as well as the EU through cohesion fund and FEDER 2014–2020 programs for financial support. Carmen López-Santos thanks the support of the University of Seville through the VI PPIT-US and the Ramón y Cajal Spanish National programs funded by MCIN/AEI/10.13039/501100011033, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Setting a comprehensive strategy to face the runback icing phenomena

  • Mora, J.
  • López García, Paloma
  • Carreño, F.
  • González, M.
  • Gutiérrez, M.
  • Montes, L.
  • Gavira, V. R.
  • López-Santos, Carmen
  • Vicente, A.
  • Rivero, P.
  • Rodríguez, R.
  • Larumbe, S.
  • Acosta, C.
  • Ibáñez-Ibáñez, P.
  • Corozzi, A.
  • Raimondo, M,
  • Kozera, R,
  • Przybyszewski, B,
  • González-Elipe, Agustín R.
  • Borrás, Ana
  • Redondo, F,
  • Agüero, A,
The development of anti-icing robust surfaces is a hot topic nowadays and particularly crucial in the aeronautics or wind energy sectors as ice accretion can compromise safety and power generation efficiency. However, the current performance of most anti-icing strategies has been proven insufficient for such demanding applications, particularly in large unprotected zones, which located downstream from thermally protected areas, may undergo secondary icing. Herein, a new testing methodology is proposed to evaluate accretion mechanisms and secondary icing phenomena through, respectively, direct impact and running-wet processes and systematically applied to anti-icing materials including commercial solutions and the latest trends in the state-of-the-art. Five categories of materials (hard, elastomeric, polymeric matrix, SLIPS and superhydrophobic) with up to fifteen formulations have been tested. This Round-Robin approach provides a deeper understanding of anti-icing mechanisms revealing the strengths and weaknesses of each material. The conclusion is that there is no single passive solution for anti-ice protection. Thus, to effectively protect a given real component, different tailored materials fitted for each particular zone of the system are required. For this selection, shape analysis of such a component and the impact characteristics of water droplets under real conditions are needed as schematically illustrated for aeronautic turbines., The project leading to this article has received funding from the EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020 - SOUNDofICE). The authors also thank the MINECO-AEI (MAT2016-79866-R, PID2019-109603RA-I00 and PID2019-110430GB-C21) funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe”, to RTI2018-096262-B-C44–MAITAI, Multidisciplinary Approach for the Implementation of New Technologies to prevent Accretion of Ice on aircraft, funded by MCIN/AEI/10.13039/501100011033 (Ministerio de Ciencia, Innovación y Universidades—Retos) and CSIC 202160E002-217538, for financial support. CLS thanks the University of Seville through the VI “Plan Propio de Investigación y Transferencia de la US”(VI PPIT-US) and the Ramon y Cajal Grant program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical monitoring of detergent pollutants in greywater

  • Lahoz, Fernando
  • de Armas-Rillo, Sergio
  • Hernández-Rodríguez, Cecilio
  • Gil-Rostra, J.
  • Yubero, Francisco
Large amount of wastewater is produced by washing machines and dishwashers, which are used in a daily basis. This domestic wastewater generated in households or office buildings (also called greywater) is drained directly to the drainpipes without differentiation from that with fecal contamination from toilets. Detergents are arguably the pollutants most frequently found in greywater from home appliances. Their concentrations vary in the successive stages in a wash cycle, which could be taken into account in a rational design of home appliances wastewater management. Analytical chemistry procedures are commonly used to determine the pollutant content in wastewater. They require collecting samples and their transport to properly equipped laboratories, which hampers real time wastewater management. In this paper, optofluidic devices based on planar Fabry-Perot microresonators operating in transmission mode in the visible and near infrared spectral ranges have been studied to determine the concentration of five brands of soap dissolved in water. It is found that the spectral positions of the optical resonances redshift when the soap concentration increases in the corresponding solutions. Experimental calibration curves of the optofluidic device were used to determine the soap concentration of wastewater from the successive stages of a washing machine wash cycle either loaded with garments or unloaded. Interestingly, the analysis of the optical sensor indicated that the greywater from the last water discharge of the wash cycle could be reused for gardening or agriculture. The integration of this kind of microfluidic devices into the home appliances design could lead to reduce our hydric environmental impact., Agencia Canaria de Investigacion, Innovacion y Sociedad de la Informacion (ProID2020010067) ; Agencia Estatal de Investigacion (PID2019-107335RA-I00) ; European Regional Development Fund (PID2019-107335RA-I00, PID2019-110430GB-C21) ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Age-Dependent Changes in Nrf2/Keap1 and Target Antioxidant Protein Expression Correlate to Lipoxidative Adducts, and Are Modulated by Dietary N-3 LCPUFA in the Hippocampus of Mice

  • Díaz, Mario
  • Valdés-Baizabal, Catalina
  • Pereda de Pablo, Daniel
  • Marín, Raquel
© 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/)., The brain has a high metabolism rate that may generate reactive oxygen and nitrogen species. Consequently, nerve cells require highly efficient antioxidant defenses in order to prevent a condition of deleterious oxidative stress. This is particularly relevant in the hippocampus, a highly complex cerebral area involved in processing superior cognitive functions. Most current evidence points to hippocampal oxidative damage as a causal effect for neurodegenerative disorders, especially Alzheimer’s disease. Nuclear factor erythroid-2-related factor 2/Kelch-like ECH-associated protein 1 (Nrf2/Keap1) is a master key for the transcriptional regulation of antioxidant and detoxifying systems. It is ubiquitously expressed in brain areas, mainly supporting glial cells. In the present study, we have analyzed the relationships between Nrf2 and Keap1 isoforms in hippocampal tissue in response to aging and dietary long-chain polyunsaturated fatty acids (LCPUFA) supplementation. The possible involvement of lipoxidative and nitrosative by-products in the dynamics of the Nrf2/Keap1 complex was examined though determination of protein adducts, namely malondialdehyde (MDA), 4-hydroxynonenal (HNE), and 3-nitro-tyrosine (NTyr) under basal conditions. The results were correlated to the expression of target proteins heme-oxygenase-1 (HO-1) and glutathione peroxidase 4 (GPx4), whose expressions are known to be regulated by Nrf2/Keap1 signaling activation. All variables in this study were obtained simultaneously from the same preparations, allowing multivariate approaches. The results demonstrate a complex modification of the protein expression patterns together with the formation of adducts in response to aging and diet supplementation. Both parameters exhibited a strong interaction. Noticeably, LCPUFA supplementation to aged animals restored the Nrf2/Keap1/target protein patterns to the status observed in young animals, therefore driving a “rejuvenation” of hippocampal antioxidant defense., This study was partly funded by the Spanish AEI-MICINN Grant number PID2019-110430GB-C21, and Gobierno Autónomo de Canarias, ACIISI (Grant number ProID2020010067). C.V.B. was financed by a subsidized contract from the ‘Agustín de Betancourt’ program (Cabildo de Tenerife, Gobierno de Canarias, Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low temperature nucleation of thermochromic VO2 crystal domains in nanocolumnar porous thin films

  • Alcaide, A M
  • Regodón, Guillermo
  • Ferrer, F J
  • Rico, Víctor J.
  • Álvarez, Rafael
  • Rojas, T. Cristina
  • González-Elipe, Agustín R.
  • Palmero, Alberto
The low temperature formation of monoclinic VO2crystal domains in nanocolumnar vanadium/oxygen thin films prepared by magnetron sputtering at oblique angles is analyzed. The synthesis procedure involved the deposition of amorphous nanocolumnar VO1.9thin films at room temperature and its subsequent annealing at temperatures between 250 °C and 330 °C in an oxygen atmosphere. The thermochromic transition of these films was found at a temperature of 47 °C when the annealing temperature was 270 °C and 58 °C when the annealing temperature was 280 °C and 290 °C, presenting a clear drop of the optical transmittance in the infrared region of the spectrum. The significant downshift in the temperature window to obtain VO2in comparison with compact films and other strategies in literature is explained by the particular morphology of the nanocolumnar structures, which contains numerous defects along with open and embedded porosity., The authors thank the financial support from MCIN/AEI/10.13039/501100011033 projects PID2019-110430GB-C21, PID2020-112620GB-I00, PID2020-114270RA-I00 and RTI2018-098117-B-C21 (also financed by FEDER Una manera de hacer europa'), the Junta de Andalucia (PAIDI-2020 through project P18-RT-3480), the H2020-EU.1.2.1-FET OPEN program (Grant 899352, project SOUNDofICE, and the EFRE Infra-Pro project ChAMP), and the University of Seville (VI PPIT-US). Guillermo Regodon would like to acknowledge funding from the European Comission-NextGenerationEU through the 'Plan de Recuperacion, Transformacion y Resiliencia' from the Spanish Government. The authors also thank Daniel Fernandez de los Reyes for the HAADF-STEM and EELS measurements, funded by Grant UCA/R155REC/2021, that were carried out at the DME-SC-ICyT-ELECMI-UCA., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Conformal TiO2 Aerogel-Like Films by Plasma Deposition: fromOmniphobic Antireflective Coatings to Perovskite Solar CellPhotoelectrodes

  • Obrero-Pérez, José M.
  • Contreras-Bernal, Lidia
  • Aparicio, Francisco J.
  • Rojas, T. Cristina
  • Ferrer-Fernández, Francisco J.
  • Orozco, Noe
  • Saghi, Zineb
  • Czermak, Triana
  • Pedrosa, José M.
  • López-Santos, Carmen
  • Ostrikov, Kostya Ken
  • Borrás, Ana
  • Sánchez-Valencia, J. R.
  • Barranco, Ángel
he ability to control the porosity of thin oxide films is akey factor determining their properties. Despite the abundance of dryprocesses for synthesizing oxide porous layers, a high porosity range istypically achieved by spin-coating-based wet chemical methods. Besides,special techniques such as supercritical drying are required to replace thepore liquid with air while maintaining the porous network. In this study,we propose a new method for the fabrication of ultraporous titaniumdioxide thin films at room or mild temperatures (T ≤ 120 °C) by asequential process involving plasma deposition and etching. These filmsare conformal to the substrate topography even for high-aspect-ratiosubstrates and show percolated porosity values above 85% that arecomparable to those of advanced aerogels. The films deposited at roomtemperature are amorphous. However, they become partly crystalline atslightly higher temperatures, presenting a distribution of anatase clusters embedded in the sponge-like open porous structure.Surprisingly, the porous structure remains after annealing the films at 450 °C in air, which increases the fraction of embeddedanatase nanocrystals. The films are antireflective, omniphobic, and photoactive, becoming superhydrophilic when subjected toultraviolet light irradiation. The supported, percolated, and nanoporous structure can be used as an electron-conducting electrode inperovskite solar cells. The properties of the cells depend on the aerogel-like film thickness, which reaches efficiencies close to thoseof commercial mesoporous anatase electrodes. This generic solvent-free synthesis is scalable and applicable to ultrahigh porousconformal oxides of different compositions, with potential applications in photonics, optoelectronics, energy storage, and controlledwetting, We thank the projects PID2022-143120OB-I00, PID2019-110430GB-C21, PID2019-110430GB-C22, and TED2021-130916B-I00, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) a way of making Europe, Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia”, and the Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (PAIDI-2020 through projects P18-RT-3480 and US-1381057). FJA thanks the EMERGIA Junta de Andalucia program. FJF thanks the University of Seville (VI PPIT-US). The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In situ growing of ZIF-8 crystals into TiO2 micro columnar films

  • Romero Guerrero, Juan J
  • Moscoso, Francisco G.
  • Hamad, Said
  • Moreno, Gloria P.
  • Rico, Víctor J.
  • Barranco Quero, Ángel
  • Lopes Costa, Tânia
  • Pedrosa, José M.
This study proposes a fast and simple method for the in situ growth of metal-organic frameworks (MOFs) on metal oxide substrates as an alternative to the traditional approaches of using gold substrates and self-assembled monolayers (SAMs). As a case study, zeolitic imidazolate framework 8 (ZIF-8) crystals were grown in micro columnar TiO2 films through simple alternate and successive immersions of the TiO2 films into solutions containing the MOFs precursors. The growth process of the MOF crystals in the interstitial spaces between the TiO2 columns was investigated by varying the metal-to-ligand ratio (1:2, 1:4, and 1:8) and by employing modulating agents such as triethylamine. It was found that the optimal deposition of ZIF-8 occurred when using a higher excess of ligand and the addition of triethylamine after a controlled number of immersion cycles. These results were obtained by using glancing angle X-ray diffraction (GAXRD) and scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDS) as characterization techniques. Additionally, a density functional theory (DFT) study as well as Fourier-transform infrared spectroscopy (FTIR) and GAXRD experiments were conducted to elucidate the nucleation process. It was concluded that the starting point is the formation of a covalent bond between the Zn cations and the TiO2 on the metal oxide surface after immersion of the film into a Zinc (II) nitrate solution, allowing for the formation of MOF nuclei once the film is subsequently immersed in the 2-methylimidazole solution. The results demonstrate the feasibility of in situ growth of MOF crystals onto metal oxide structures by a layer-by-layer strategy, offering a promising alternative to conventional methods., This research has been funded by the Spanish AEI/MCIN/ 10.13039/501100011033 within the Next Generation EU/PRTR funds through the projects PCI2020-112241 (M-ERA.NET 2019 project 7106, SALMOS) and PID2019-110430 GB-C22 (AD- LIGHT) and PID2019-110430 GB-C21 (AD- Tronics). ERDF (80 %) and Andalusian CTEICU/JA in the framework of the Operative Programme FEDER-Andalucia 2014–2020 through projects P20 01258 (objective 01) and UPO-1381028 (objective 1.2.3.) also contributed to the present research. We also thank the Laboratory of Materials Characterization INMALAB of Universidad Pablo de Olavide for experiments and technical support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multidimensional nanoarchitectures for improved indoor light harvesting in dye-sensitized solar cells

  • Castillo-Seoane, Javier
  • Contreras-Bernal, Lidia
  • Riquelme, Antonio J.
  • Fauvel, Samuel
  • Kervella, Yann
  • Gil-Rostra, Jorge
  • Lozano, Gabriel
  • Barranco, Ángel
  • Demadrille, Renaud
  • Sánchez-Valencia, Juan R.
  • Borrás, Ana
Dye Sensitized Solar Cells (DSSCs) have recently gained renewed interest for their potential in indoor light harvesting and powering wireless devices. However, to fully exploit their potential, crucial aspects require further attention, in particular, the improvement of spectral compatibility and low-light harvesting mechanisms, as well as the development of efficient photoanodes through high-yield scalable methods. In this article, we propose the use of nanocomposite photoanodes integrating mesoporous TiO2 nanoparticles, ITO nanotubes (NT), and anatase TiO2 shells (ITO@TiO2 NT) prepared by step-by-step method relying on mild temperature conditions and avoiding toxic precursors. These photoanodes outperform previous attempts to implement low-dimensional ITO and ITO@TiO2 nanowires and nanotubes for outdoor light conversion, demonstrating a power conversion efficiency under low artificial light intensity of 24 % for at 0.014 mW cm−2, a 166 % increase compared to the conventional architectures. Advanced microstructural, optical, and electrochemical characterizations have revealed that the strong scattering effect of the light in the visible range coupled with enhanced charge collection at low-intensity illumination are the essential mechanisms responsible for such enhanced energy conversion. Remarkably, our devices retain up to 90 % of the normal incidence efficiency even under glancing illumination, while conventional reference devices retain only 30 %., We thank the projects PID2019-109603RA-I00, TED2021-130916B-I00, PID2019-110430 GB-C21, and PID2022-143120OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe, Fondos NextgenerationEU and Plan de Recuperación, Transformación y Resiliencia”. LCB acknowledges the French embassy in Spain for the grant “123892U” within framework of the proposal scientific call 2022 “Becas doctorales y postdoctorales”. Thanks to C.M.D Felipe II, particularly María Inmaculada Carmona Rivera, for providing some tools for preparing counter-electrodes. The authors also thank CSIC for its financial support through the Interdisciplinary Thematic Platform (PTI) Transición Energética Sostenible (PTI-TRANSENER+). R.D. acknowledges the European Research Council (ERC) for funding. This work was funded under the European Union's Horizon 2020 research and innovation programme (grant agreement number 832606; project PISCO). The project leading to this article has received funding from the EU H2020 program under grant agreement 851929 (ERC Starting Grant 3DScavengers)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanically Switchable Wetting Petal Effect in Self-Patterned Nanocolumnar Films on Poly(dimethylsiloxane)

  • Parra-Barranco, Julian
  • López-Santos, Carmen
  • Sánchez-Valencia, Juan Ramón
  • Borrás, Ana
  • González-Elipe, Agustín R.
  • Barranco, Ángel
Switchable mechanically induced changes in the wetting behavior of surfaces are of paramount importance for advanced microfluidic, self-cleaning and biomedical applications. In this work we show that the well-known polydimethylsiloxane (PDMS) elastomer develops self-patterning when it is coated with nanostructured TiO2 films prepared by physical vapor deposition at glancing angles and subsequently subjected to a mechanical deformation. Thus, unlike the disordered wrinkled surfaces typically created by deformation of the bare elastomer, well-ordered and aligned micro-scaled grooves form on TiO2/PDMS after the first post-deposition bending or stretching event. These regularly patterned surfaces can be reversibly modified by mechanical deformation, thereby inducing a switchable and reversible wetting petal effect and the sliding of liquid droplets. When performed in a dynamic way, this mechanical actuation produces a unique capacity of liquid droplets (water and diiodomethane) transport and tweezing, this latter through their selective capture and release depending on their volume and chemical characteristics. Scanning electron and atomic force microscopy studies of the strained samples showed that a dual-scale roughness, a parallel alignment of patterned grooves and their reversible widening upon deformation, are critical factors controlling this singular sliding behavior and the possibility to tailor their response by the appropriate manufacturing of surface structures., The projects leading to this article received funding from the EU H2020 program under the grant agreement 899352 (FETOPEN-01-2018-2019-2020—SOUNDofICE), the AEI-MICINN (PID2019-110430GB-C21 and PID2019-109603RA-I0, MAT2013-40852-R, MAT2013- 42900-P and MINECO-CSIC 201560E055) and the Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (PAIDI-2020 through projects ref. AT17-6079, P18-RT-3480)., The authors thank the AEI-MICINN (PID2019-110430GB-C21 and PID2019-109603RA-I0, MAT2013-40852-R, MAT2013- 42900-P and MINECO-CSIC 201560E055), the Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (PAIDI-2020 through projects ref. AT17-6079, P18-RT-3480, US-1263142 and US-1381045) and the EU through cohesion fund and FEDER 2014–2020 and the EU H2020 program under the grant agreement 899352 (FETOPEN-01-2018-2019-2020—SOUNDofICE). C.L.-S. and J.R.S.-V. thank the University of Seville through the VI PPIT-US program. J.R.S.-V. thanks the Ramon y Cajal Spanish National program., Peer reviewed
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Setting a comprehensive strategy to face the runback icing phenomena

  • Mora, Julio
  • García, Paloma
  • Carreño, Francisco
  • González, Miguel
  • Gutiérrez, Marcos
  • Montes, Laura
  • Rico, Victor J.
  • López-Santos, Carmen
  • Vicente Gómara, Adrián
  • Rivero Fuente, Pedro J.
  • Rodríguez Trías, Rafael
  • Larumbe Abuin, Silvia
  • Acosta, Carolina
  • Ibáñez-Ibáñez, Pablo
  • Corozzi, Alessandro.
  • Raimondo, Mariarosa
  • Kozera, Rafal
  • Przybyszewski, Bartlomiej
  • González-Elipe, Agustín R.
  • Borrás, Ana
  • Redondo, Francisco
  • Agüero, Alina
The development of anti-icing robust surfaces is a hot topic nowadays and particularly crucial in the aeronautics or wind energy sectors as ice accretion can compromise safety and power generation efficiency. However, the current performance of most anti-icing strategies has been proven insufficient for such demanding applications, particularly in large unprotected zones, which located downstream from thermally protected areas, may undergo secondary icing. Herein, a new testing methodology is proposed to evaluate accretion mechanisms and secondary icing phenomena through, respectively, direct impact and running-wet processes and systematically applied to anti-icing materials including commercial solutions and the latest trends in the state-of-the-art. Five categories of materials (hard, elastomeric, polymeric matrix, SLIPS and superhydrophobic) with up to fifteen formulations have been tested. This Round-Robin approach provides a deeper understanding of anti-icing mechanisms revealing the strengths and weaknesses of each material. The conclusion is that there is no single passive solution for anti-ice protection. Thus, to effectively protect a given real component, different tailored materials fitted for each particular zone of the system are required. For this selection, shape analysis of such a component and the impact characteristics of water droplets under real conditions are needed as schematically illustrated for aeronautic turbines., The project leading to this article has received funding from the EU H2020 program under grant agreement 899352 (FETOPEN-01-2018-2019-2020 - SOUNDofICE). The authors also thank the MINECO-AEI (MAT2016-79866-R, PID2019-109603RA-I00 and PID2019-110430GB-C21) funded by MCIN/AEI/10.13039/501100011033 and by “ERDF (FEDER) A way of making Europe”, to RTI2018-096262-B-C44–MAITAI, Multidisciplinary Approach for the Implementation of New Technologies to prevent Accretion of Ice on aircraft, funded by MCIN/AEI/10.13039/501100011033 (Ministerio de Ciencia, Innovación y Universidades—Retos) and CSIC 202160E002-217538, for financial support. CLS thanks the University of Seville through the VI “Plan Propio de Investigación y Transferencia de la US”(VI PPIT-US) and the Ramon y Cajal Grant program.