Pasar al contenido principal

DISEÑO DE POLIMEROS ANTIMICROBIANOS PARA REDUCIR LAS INFECCIONES NOSOCOMIALES

MAT2016-78437-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 54
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multifunctional PLA Blends Containing Chitosan Mediated Silver Nanoparticles: Thermal, Mechanical, Antibacterial, and Degradation Properties

  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
  • Madani, Salim
  • Rodríguez, Gema
  • Hevilla, Víctor
  • Echeverría, Coro
  • Fernández-Garcia, Marta
  • Muñoz-Bonilla, Alexandra
  • Charef, Noureddine
  • López, Daniel
[EN] Poly(lactic acid) (PLA) is one of the most commonly employed synthetic biopolymers for facing plastic waste problems. Despite its numerous strengths, its inherent brittleness, low toughness, and thermal stability, as well as a relatively slow crystallization rate represent some limiting properties when packaging is its final intended application. In the present work, silver nanoparticles obtained from a facile and green synthesis method, mediated with chitosan as a reducing and stabilizing agent, have been introduced in the oligomeric lactic acid (OLA) plasticized PLA in order to obtain nanocomposites with enhanced properties to find potential application as antibacterial food packaging materials. In this way, the green character of the matrix and plasticizer was preserved by using an eco-friendly synthesis protocol of the nanofiller. The X-ray diffraction (XRD) and differential scanning calorimetry (DSC) results proved the modification of the crystalline structure as well as the crystallinity of the pristine matrix when chitosan mediated silver nanoparticles (AgCH-NPs) were present. The final effect over the thermal stability, mechanical properties, degradation under composting conditions, and antimicrobial behavior when AgCH-NPs were added to the neat plasticized PLA matrix was also investigated. The obtained results revealed interesting properties of the final nanocomposites to be applied as materials for the targeted application., This research was funded by Spanish Ministry of Science, Innovation and Universities (AEI-MICINN/FEDER); Projects MAT2016-78437-R and MAT2017-88123-P. A.S. acknowledges her APOSTD/2018/228 postdoctoral contract from the Education, Research, Culture and Sport Council from the Government of Valencia. C.E. acknowledges IJCI-2015-26432 contract from MICINN.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biodegradable and Antimicrobial PLA-OLA Blends Containing Chitosan-Mediated Silver Nanoparticles with Shape Memory Properties for Potential Medical Applications

  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
  • Madani, Salim
  • Muñoz-Bonilla, Alexandra
  • Fernández-Garcia, Marta
  • Peponi, Laura
  • Leones, Adrián
  • Rodríguez, Gema
  • Echeverría, Coro
  • López, Daniel
[EN] To use shape memory materials based on poly (lactic acid) (PLA) for medical applications is essential to tune their transition temperature (T-trans) near to the human body temperature. In this study, the combination of lactic acid oligomer (OLA), acting as a plasticizer, together with chitosan-mediated silver nanoparticles (AgCH-NPs) to create PLA matrices is studied to obtain functional shape memory polymers for potential medical applications. PLA/OLA nanocomposites containing different amounts of AgCH-NPs were obtained and profusely characterized relating their structure with their antimicrobial and shape memory performances. Nanocomposites exhibited shape memory responses at the temperature of interest (near physiological one), as well as excellent shape memory responses, shorter recovery times and higher recovery ratios (over 100%) when compared to neat materials. Moreover, antibacterial activity tests confirmed biocidal activity; therefore, these functional polymer nanocomposites with shape memory, degradability and biocidal activity show great potential for soft actuation applications in the medical field., This research was funded by Spanish Ministry of Science and Innovation (AEIMICINN/FEDER); Projects MAT2016-78437-R, MAT2017-88123-P and PCIN-2017-036. A. S. acknowledges her ¿APOSTD/2018/228¿ and ¿PAID-10-19¿ postdoctoral contracts from the Education, Research, Culture and Sport Council from the Government of Valencia and from the Polytechnic University of Valencia, respectively. C.E. acknowledges the IJCI-2015-26432 contract from MICINN. L.P. acknowledges the Ramon y Cajal (RYC-2014-15595) contract from MICINN.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Honeycomb films with core-shell dispersed phases prepared by combination of breath figures and phase separation process of ternary blends

  • Campo, Ángel Adolfo del
  • Sanz de León, Alberto
  • Rodríguez-Hernández, Juan
  • Muñoz-Bonilla, Alexandra
Herein, we propose a strategy to fabricate core¿shell microstructures ordered in hexagonal arrays by combining the breath figures approach and phase separation of immiscible ternary blends. This simple strategy to fabricate these structures involves only the solvent casting of a ternary polymer blend under moist atmosphere, which provides a facile and low-cost fabrication method to obtain the porous structures with a core¿shell morphology. For this purpose, blends consisting of polystyrene (PS) as a major component and PS40-b-P(PEGMA300)48 amphiphilic copolymer and polydimethylsiloxane (PDMS) as minor components were dissolved in tetrahydrofuran and cast onto glass wafers under humid conditions, 70% of relative humidity. The resulting porous morphologies were characterized by optical and confocal Raman microscopy. In particular, confocal Raman results demonstrated the formation of core¿shell morphologies into the ordered pores, in which the PS forms the continuous matrix, whereas the other two phases are located into the cavities (PDMS is the core while the amphiphilic copolymer is the shell). Besides, by controlling the weight ratio of the polymer blends, the structural parameters of the porous structure such as pore diameter and the size of the core can be effectively tuned., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Facile one-pot exfoliation and integration of 2D layered materials by dispersion in a photocurable polymer precursor

  • Gallardo Ruiz, Alberto
  • Pereyra, R.
  • Martínez-Campos, Enrique
  • García Sánchez, Carolina
  • Acitores, D.
  • Casado-Losada, I.
  • Gómez-Fatou, Marián A.
  • Reinecke, Helmut
  • Ellis, Gary James
  • Acevedo, D.
  • Rodríguez-Hernández, Juan
  • Salavagione, Horacio J.
Efficient exfoliation of graphene and related materials (GRM) and fast and inexpensive integration/assembly are crucial to fulfil their full potential. A high degree of exfoliation in organic media can be achieved with high boiling point liquids that usually leave residues after drying, which is a handicap for many applications. Here, the effective exfoliation and dispersion of GRM in a vinyl monomer, which is subsequently converted to a functional polymer by photopolymerization, is reported. Nanocomposite membranes and three-dimensional objects are produced by the photo-curing process and stereolithography 3D printing, respectively., This work was supported by MINECO (Spain, MAT2013-47898- C2-2-R, MAT2014-54231-C4-4-P, MAT2013-42957-R, MAT2016- 78437-R) and FONCYT (Argentina, PICT-2716-2013, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antimicrobial surfaces obtained from blends of block copolymers synthesized by simultaneous ATRP and click chemistry reactions

  • Álvarez-Paino, Marta
  • Bonilla, Pablo
  • Cuervo-Rodríguez, Rocío
  • López-Fabal, Fátima
  • Gómez-Garcés, José L.
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
A series of amphiphilic block copolymers based on styrene (S) and a monomer bearing both thiazole and triazole groups (MTA) were synthesized by combination of ATRP and click chemistry. In particular, two approaches were followed; the direct ATRP from a PS macroinitiator of the pre-synthesized MTA antimicrobial monomer; and the simultaneous synthesis and polymerization of the MTA through a one-step ‘click chemistry’/ATRP process. Both strategies conduct to well-defined block copolymers with controlled molecular weight and low polydispersity. Subsequent quaternization of the thiazole and triazole groups of MTA units with butyl iodine renders systems with antimicrobial properties. Although these systems presented relatively low antimicrobial activity against bacteria and fungi in aqueous media, the preparation of surfaces functionalized with these copolymers leads to potent antimicrobial surfaces, especially against gram-positive bacteria., This work was supported financially by the MINECO (Projects MAT2013-47902-C2-1-R and MAT2016-78437-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Contact Active Antimicrobial Coatings Prepared by Polymer Blending

  • Cuervo-Rodríguez, Rocío
  • López-Fabal, Fátima
  • Gómez-Garcés, José L.
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
Herein, contact active antimicrobial films are prepared by simply blending cationic amphiphilic block copolymers with commercial polystyrene (PS). The copolymers are prepared by combining atom transfer radical polymerization and “click chemistry.” A variety of copolymers are synthesized, and composed of a PS segment and an antimicrobial block bearing flexible side chain with thiazole and triazole groups, 4-(1-(2-(4-methylthiazol-5-yl)ethyl)-1H-1,2,3-triazol-4-yl) butyl methacrylate (TTBM). The length of the TTBM block is varied as well as the alkylating agent. Different films are prepared from N,N-dimethylformamide solution, containing variable PS-b-PTTBM/PS ratio: from 0 to 100 wt%. Remarkably, the blend films, especially those with 30 and 50 wt% of copolymers, exhibit excellent antimicrobial activities against Gram-positive, Gram-negative bacteria and fungi, even higher than films prepared exclusively from the cationic copolymers. Blends composed of 50 wt% of the copolymers present a more than 99.999% killing efficiency against the studied microorganisms. The better activity found in blends can be due to the higher roughness, which increases the surface area and consequently the contact with the microorganisms. These results demonstrate that the use of blends implies a reduction of the content of antimicrobial agent and also enhances the antimicrobial activity, providing new insights for the better designing of antimicrobial coatings., This work was supported financially by the MINECO (Project MAT2016-78437-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication of 3D printed objects with controlled surface chemistry and topography

  • Vargas-Alfredo, Nelson
  • Reinecke, Helmut
  • Gallardo Ruiz, Alberto
  • Campo, Ángel Adolfo del
  • Rodríguez-Hernández, Juan
We describe a novel strategy to modify the surface topography as well as the chemical composition of 3D parts fabricated by additive manufacturing. The 3D objects were fabricated by fused deposition modeling (FDM) using styrene filaments. The surface of the objects was then topographically modified providing materials with porous surfaces by means of the Breath Figures approach. By immersion of the object in a chloroform/polystyrene solution during few seconds and evaporation in a controlled humidity chamber, 3D objects decorated with pores over the entire surfaces could be prepared. Moreover, this approach permitted the modification of the pore size as a function of the immersion time as well as the solution concentration. Finally, the porous surface was modified by using a chemical treatment with chlorosulfonic acid. The created chlorosulfonyl groups were used to anchor different chemical compounds to the 3D object with the subsequent change of their surface properties., The authors gratefully acknowledge support from the ConsejoSuperior de Investigaciones Científicas (CSIC). Equally, this work was financially supported by the Ministerio de Economía y Competitividad (MINECO) through MAT2013-47902-C2-1-R, MAT2013-42957-R and MAT2016-78437-R (FEDER – EU)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication of biocompatible and efficient antimicrobial porous polymer surfaces by the Breath Figures approach

  • Vargas-Alfredo, Nelson
  • Martínez-Campos, Enrique
  • Santos-Coquillat, A.
  • Dorronsoro, Ane
  • Cortajarena, Aitziber L.
  • Campo, Ángel Adolfo del
  • Rodríguez-Hernández, Juan
We designed and fabricated highly efficient and selective antibacterial substrates, i.e. surface non-cytotoxic against mammalian cells but exhibiting strong antibacterial activity. For that purpose, microporous substrates (pore sizes in the range of 3–5 μm) were fabricated using the Breath Figures approach (BFs). These substrates have additionally a defined chemical composition in the pore cavity (herein either a poly(acrylic acid) or the antimicrobial peptide Nisin) while the composition of the rest of the surface is identical to the polymer matrix. As a result, considering the differences in size of bacteria (1–4 μm) in comparison to mammalian cells (above 10 µm) the bacteria were able to enter in contact with the inner part of the pores where the antimicrobial functionality has been placed. On the opposite, mammalian cells remain in contact with the top surface thus preventing cytotoxic effects and enhancing the biocompatibility of the substrates. The resulting antimicrobial surfaces were exposed to Staphylococcus aureus as a model bacteria and murine endothelial C166-GFP cells. Superior antibacterial performance while maintaining an excellent biocompatibility was obtained by those surfaces prepared using PAA while no evidence of significant antibacterial activity was observed at those surfaces prepared using Nisin., The authors gratefully acknowledge support from the Consejo Superior de Investigaciones Científicas (CSIC). Equally, this work was financially supported by the Ministerio de Economía y Competitividad (MINECO) through MAT2016-78437-R-FEDER-EU (JRH) and BIO2012-34835, BIO2016-77367-C2-1-R (ALC) projects. Nelson Vargas Alfredo thanks the support for postdoctoral research from the CONACYT (CN: 274411)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antimicrobial 3D Porous Scaffolds Prepared by Additive Manufacturing and Breath Figures

  • Vargas-Alfredo, Nelson
  • Dorronsoro, Ane
  • Cortajarena, Aitziber L.
  • Rodríguez-Hernández, Juan
We describe herein a novel strategy for the fabrication of efficient 3D printed antibacterial scaffolds. For this purpose, both the surface topography as well as the chemical composition of 3D scaffolds fabricated by additive manufacturing were modified. The scaffolds were fabricated by fused deposition modeling (FDM) using high-impact polystyrene (HIPS) filaments. The surface of the objects was then topographically modified providing materials with porous surfaces by means of the Breath Figures approach. The strategy involves the immersion of the scaffold in a polymer solution during a precise period of time. This approach permitted the modification of the pore size varying the immersion time as well as the solution concentration. Moreover, by using polymer blend solutions of polystyrene and polystyrene-b-poly(acrylic acid) (PS-b-PAA) and a quaternized polystyrene-b-poly(dimethylaminoethyl methacrylate) (PS-b-PDMAEMAQ), the scaffolds were simultaneously chemically modified. The surfaces were characterized by scanning electron microscopy and infrared spectroscopy. Finally, the biological response toward bacteria was explored. Porous surfaces prepared using quaternized PDMAEMA as well as those prepared using PAA confer antimicrobial activity to the films, i.e., were able to kill on contact Staphylococcus aureus employed as model bacteria., We gratefully acknowledge support from the Consejo Superior de Investigaciones Cienti ́ fi cas (CSIC). Equally, this work was fi nancially supported by the Ministerio de Economi ́ ay Competitividad (MINECO) through MAT2016-78437-R (AEI/FEDER, UE), BIO2012-34835 and BIO2017-77367-C2- 1R projects. Nelson Vargas Alfredo thanks the support for postdoctoral research from the CONACYT (CN: 274411), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermosensitive hydrogel platforms with modulated ionic load for optimal cell sheet harvesting

  • Martínez-Campos, Enrique
  • Santos-Coquillat, A.
  • Pérez-Ojeda, M. Eugenia
  • Civantos, Ana
  • Elvira, Carlos
  • Reinecke, Helmut
  • García Sánchez, Carolina
  • Ramos, V.
  • Rodríguez-Hernández, Juan
  • Gallardo Ruiz, Alberto
Tissue engineering and regenerative medicine demand affordable and robust technologies for cell manipulation that are capable of culturing cells and collecting them by gentle cell detachment. Nowadays, technologies able to detach and transplant cell monolayers in a controlled and complete manner are particularly relevant. In this work, the capability of vinyl-caprolactam-based hydrogels functionalized with different ionic groups (anionic, cationic or two types of zwitterions) to support mouse endothelial C166-GFP cell growth until confluence and to allow for subsequent cell and cell sheet detachment using thermal stimuli is shown. These hydrogel-type supports, which are robust and easy to ‘handle’ and maneuver, are obtained in a simple, one step radical photopolymerization procedure that requires two types of cross-linkers. For comparison reasons, these formulations were studied together with a neutral hydrogel. Nature and type of charge were shown to greatly influence cell growth. Furthermore, only the neutral and zwitterionic hydrogels exhibited excellent detachment efficiency upon decrease of temperature in spite of the capability of most of the hydrogels to form cell monolayers. The ability of cell sheet detachment was related to the extent of thermosensitivity. The use of hydrogels allowed for transplanting the cells without the need of a superstrate and did not show a thin-thickness requirement, which are usual limitations for the use of poly-N-isopropylacrylamide (pNIPAm) supports, such as commercial grafts. The whole family may actually be considered as a candidate to compete with the expensive and technologically complex thermoresponsive cell platforms based on those pNIPAm grafts., The authors gratefully acknowledge support from the Consejo Superior de Investigaciones Científicas (CSIC). Equally, this work was financially supported by the Ministerio de Economía y Competitividad (MINECO) through MAT2013-42957-R, MAT2016-78437-R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring macromolecular structure of cationic polymers towards efficient contact active antimicrobial surfaces

  • Tejero, Rubén
  • Gutiérrez, Beatriz
  • López García, Daniel
  • López-Fabal, Fátima
  • Gómez-Garcés, José L.
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
The aim of this work is the preparation of contact active antimicrobial films by blending copolymers with quaternary ammonium salts and polyacrylonitrile as matrix material. A series of copolymers based on acrylonitrile and methacrylic monomers with quaternizable groups were designed with the purpose of investigating the influence of their chemical and structural characteristics on the antimicrobial activity of these surfaces. The biocide activity of these systems was studied against different microorganisms, such as the Gram-positive bacteria Staphylococcus aureus and the Gram-negative bacteria Pseudomona aeruginosa and the yeast Candida parapsilosis. The results confirmed that parameters such as flexibility and polarity of the antimicrobial polymers immobilized on the surfaces strongly affect the efficiency against microorganisms. In contrast to the behavior of copolymers in water solution, when they are tethered to the surface, the active cationic groups are less accessible and then, the mobility of the side chain is critical for a good contact with the microorganism. Blend films composed of copolymers with high positive charge density and chain mobility present up to a more than 99.999% killing efficiency against the studied microorganisms., This work was supported financially by the MINECO (Project MAT2016-78437-R), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antimicrobial Porous Surfaces Prepared by Breath Figures Approach

  • Muñoz-Bonilla, Alexandra
  • Cuervo-Rodríguez, Rocío
  • López-Fabal, Fátima
  • Gómez-Garcés, José L.
  • Fernández-García, Marta
Herein, efficient antimicrobial porous surfaces were prepared by breath figures approach from polymer solutions containing low content of block copolymers with high positive charge density. In brief, those block copolymers, which were used as additives, are composed of a polystyrene segment and a large antimicrobial block bearing flexible side chain with 1,3-thiazolium and 1,2,3-triazolium groups, PS54-b-PTTBM-M44, PS54-b-PTTBM-B44, having different alkyl groups, methyl or butyl, respectively. The antimicrobial block copolymers were blended with commercial polystyrene in very low proportions, from 3 to 9 wt %, and solubilized in THF. From these solutions, ordered porous films functionalized with antimicrobial cationic copolymers were fabricated, and the influence of alkylating agent and the amount of copolymer in the blend was investigated. Narrow pore size distribution was obtained for all the samples with pore diameters between 5 and 11 µm. The size of the pore decreased as the hydrophilicity of the system increased; thus, either as the content of copolymer was augmented in the blend or as the copolymers were quaternized with methyl iodide. The resulting porous polystyrene surfaces functionalized with low content of antimicrobial copolymers exhibited remarkable antibacterial efficiencies against Gram positive bacteria Staphylococcus aureus, and Candida parapsilosis fungi as microbial models., This work was supported financially by the MINECO (Project MAT2016-78437-R), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electro-responsive polyelectrolyte-coated surfaces

  • Sénéchal, V.
  • Saadaoui, H.
  • Rodríguez-Hernández, Juan
  • Drummond, Carlos
The anchoring of polymer chains at solid surfaces is an efficient way to modify interfacial properties like the stability and rheology of colloidal dispersions, lubrication and biocompatibility. Polyelectrolytes are good candidates for the building of smart materials, as the polyion chain conformation can often be tuned by manipulation of different physico-chemical variables. However, achieving efficient and reversible control of this process represents an important technological challenge. In this regard, the application of an external electrical stimulus on polyelectrolytes seems to be a convenient control strategy, for several reasons. First, it is relatively easy to apply an electric field to the material with adequate spatiotemporal control. In addition, in contrast to chemically induced changes, the molecular response to a changing electric field occurs relatively quickly. If the system is properly designed, this response can then be used to control the magnitude of surface properties. In this work we discuss the effect of an external electric field on the adhesion and lubrication properties of several polyelectrolyte-coated surfaces. The influence of the applied field is investigated at different pH and salt conditions, as the polyelectrolyte conformation is sensitive to these variables. We show that it is possible to fine tune friction and adhesion using relatively low applied fields., The authors acknowledge the Fnancial support from the Ministerio de Economía y Competitividad (MINECO) project MAT2016-78437-R (Spain) and COST Action MP1303: Understanding and Controlling Nano and Mesoscale Friction., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Micro-wrinkled hydrogel patterned surfaces using pH-sensitive monomers

  • González-Henríquez, Carmen M.
  • Alfaro-Cerda, P. A.
  • Veliz-Silva, D. F.
  • Sarabia-Vallejos, Mauricio A.
  • Terraza, C. A.
  • Rodríguez-Hernández, Juan
Herein, we report the fabrication of wrinkled hydrogel films with tunable pH sensitivity by using tertiary amine methacrylate-based monomers. On the one hand, hydrogels composed of 2-hydroxyethyl methacrylate (HEMA), N,N-diethylaminoethyl methacrylate (DEAEMA), and poly(ethylene glycol) diacrylate (PEGDA) were synthesized using different monomer feed. Their pH responsiveness was tested via contact angle measurements using different buffers (pH 5.4, 7.4 and 8.3) as aqueous media. On the other hand, the same buffers were used as solvent during synthesis instead of water. Later, hydrogel films were deposited by spin coating onto methacryloyl-functionalized substrates, in order to form a covalent anchoring to the surface. The monomer conversion ratio was inspected by H NMR analysis, demonstrating a partial conversion in the first thermo-polymerization step and a complete reaction upon at the end. AFM and FE-SEM micrographs provide topographical information about the surfaces, like wrinkled pattern width, height, and wrinkles preferential direction. Force spectroscopy measurements depict some clues about the local micromechanical properties of the films, evidencing a clear influence of the monomer feed composition on the final characteristics of the hydrogel patterns. Contact angle measurements evidence an important pH responsiveness which is increased by adding a larger amount of DEAEMA to the feed., The authors acknowledge financial support given by FONDECYT Grant No. 1170209. M.A. Sarabia acknowledges the financial support given by CONICYT through the doctoral program Scholarship Grant. J. Rodriguez-Hernandez acknowledges financial support from Ministerio de Economia y Competitividad (MINECO) (Project MAT2016-78437-R). Finally, this study was funded by VRAC Grant Number L216-04 of Universidad Tecnológica Metropolitana., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Poly(ionic liquid)s as antimicrobial materials

  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
In the last few years, efforts to broaden PILs properties, structures, functionalities, and applications have grown rapidly. One of their interesting potential uses is as antimicrobial systems, due to their versatility and capacity to be adjusted in different morphologies, sizes, and surface charges. This review gathers the recent advances in antimicrobial materials based on PILs. Initially, the synthesis of PILs with antimicrobial activity, showing the influence of the chemical structure, whether is cationic or anionic and their corresponding counter-ions, is pointed out. Equally, most of these PILs present modest mechanical performance that turn researchers to overcome it by grafting them to different surfaces, crosslinked with other monomers or by simple blending with polymers. Moreover, the nature of PILs makes them regulators of size and shape of inorganic antimicrobial particles, enhancing their effectivity., This work was supported financially by the MINECO (Project MAT2016-78437-R), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Providing antibacterial activity to poly(2-hydroxy ethyl methacrylate) by copolymerization with a methacrylic thiazolium derivative

  • Muñoz-Bonilla, Alexandra
  • López García, Daniel
  • Fernández-García, Marta
Antimicrobial polymers and coatings are potent types of materials for fighting microbial infections, and as such, they have attracted increased attention in many fields. Here, a series of antimicrobial copolymers were prepared by radical copolymerization of 2-hydroxyethyl methacrylate (HEMA), which is widely employed in the manufacturing of biomedical devices, and the monomer 2-(4-methylthiazol-5-yl)ethyl methacrylate (MTA), which bears thiazole side groups susceptible to quaternization, to provide a positive charge. The copolymers were further quantitatively quaternized with either methyl or butyl iodide, as demonstrated by nuclear magnetic resonance (NMR) and attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR). Then, the polycations were characterized by zeta potential measurements to evaluate their effective charge and by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) to evaluate their thermal properties. The ζ-potential study revealed that the quaternized copolymers with intermediate compositions present higher charges than the corresponding homopolymers. The cationic copolymers showed greater glass transition temperatures than poly(2-hydroxyethyl methacrylate) (PHEMA), with values higher than 100 °C, in particular those quaternized with methyl iodide. The TGA studies showed that the thermal stability of polycations varies with the composition, improving as the content of HEMA in the copolymer increases. Microbial assays targeting Gram-positive and Gram-negative bacteria confirmed that the incorporation of a low number of cationic units into PHEMA provides antimicrobial character with a minimum inhibitory concentration (MIC) of 128 µg mL<sup>−1</sup>. Remarkably, copolymers with MTA molar fractions higher than 0.50 exhibited MIC values as low as 8 µg mL<sup>−1</sup>., This work was supported by grants from el Sistema Nacional de Garantía Juvenil: PEJ-2014-A-85575 and CM_MAD_ICTP_040 (Promoción de Empleo Joven e Implantación de la Garantía Juvenil, 2014 MINECO, and 2015 CSIC, respectively) and el Ministerio de Ciencia, Innovación y Universidades (Project MAT2016-78437-R), la Agencia Estatal de Investigación (AEI, Spain), and el Fondo Europeo de Desarrollo Regional (FEDER, EU). The authors would like to acknowledge Móstoles University Hospital for the assistance with the antimicrobial tests and Ms. M. González for the preparation of polymers., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design and fabrication of biocompatible wrinkled hydrogel films with selective antibiofouling properties

  • González-Henríquez, Carmen M.
  • Sarabia-Vallejos, Mauricio A.
  • Terraza, C. A.
  • Campo, Ángel Adolfo del
  • López-Martínez, Elena
  • Cortajarena, Aitziber L.
  • Casado-Losada, I.
  • Martínez-Campos, Enrique
  • Rodríguez-Hernández, Juan
In this article, we explored the selective antibiofouling capacity acquired by functional wrinkled hydrogel films via a fine tuning of their chemical structure through the gradual insertion of hydrophobic radical groups in their network. The hydrogel consists of three main components: hydroxyethyl methacrylate (HEMA, amphiphilic monomer), trifluoroethyl methacrylate (TFMA, hydrophobic monomer), and poly(ethylene glycol) diacrylate (PEGDA, hydrophilic crosslinking agent). Interestingly, the manipulation of the chemical composition affects both, surface morphology and physicochemical characteristics of the patterns, inducing transitions between different surface microstructures, i.e. from wrinkles to creases, to folds, and to crumples. Contact angle measurements show that the insertion of TFMA produces a slight decrease in surface wettability, remaining however highly hydrophilic. By using confocal Raman spectroscopy, important information about wrinkle formation mechanism could be obtained. The procedure presented in this article involves two consecutive thermal and photopolymerization steps, generating a “pseudo” two-layer system, which contracts at different extents when is exposed to external stimuli, leading to the formation of wrinkled surfaces. Finally, bacterial and cellular adhesion/proliferation studies were carried out, evidencing that the amount of TFMA included clearly reduce the bacterial adhesion while mammalian cells are able to still proliferate., The authors acknowledge financial support given by FONDECYT Grant N° 1170209. M.A. Sarabia acknowledges the financial support given by CONICYT through the doctoral program Scholarship Grant. J. Rodriguez-Hernandez acknowledges financial support from the Spanish National Science Foundation (CSIC) and the Ministerio de Economia y Competitividad (MINECO) (Project MAT2016-78437-R). Finally, this study was funded by VRAC Grant Number L216-04 of Universidad Tecnológica Metropolitana., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bio-Based Polymers with Antimicrobial Properties towards Sustainable Development

  • Muñoz-Bonilla, Alexandra
  • Echeverría, Coro
  • Sonseca, Águeda
  • Arrieta, Marina P.
  • Fernández-García, Marta
This article concisely reviews the most recent contributions to the development of sustainable bio-based polymers with antimicrobial properties. This is because some of the main problems that humanity faces, nowadays and in the future, are climate change and bacterial multi-resistance. Therefore, scientists are trying to provide solutions to these problems. In an attempt to organize these antimicrobial sustainable materials, we have classified them into the main families; i.e., polysaccharides, proteins/polypeptides, polyesters, and polyurethanes. The review then summarizes the most recent antimicrobial aspects of these sustainable materials with antimicrobial performance considering their main potential applications in the biomedical field and in the food industry. Furthermore, their use in other fields, such as water purification and coating technology, is also described. Finally, some concluding remarks will point out the promise of this theme., This research was funded by MINECO, Project MAT2016-78437-R, the Agencia Estatal de Investigación (AEI, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU)., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Micrometric Wrinkled Patterns Spontaneously Formed on Hydrogel Thin Films via Argon Plasma Exposure

  • González-Henríquez, Carmen M.
  • Veliz-Silva, D. F.
  • Sarabia-Vallejos, Mauricio A.
  • Campo, Ángel Adolfo del
  • Rodríguez-Hernández, Juan
The generation of microstructured patterns on the surface of a specific polymeric material could radically improve their performance in a particular application. Most of the interactions with the environment occur at the material interface; therefore, increasing the exposed active surface considerably improves their range of application. In this article, a simple and reliable protocol to form spontaneous wrinkled patterns using a hydrogel layer is reported. For this purpose, we took advantage of the doctor blade technique in order to generate homogenous films over solid substrates with controlled thickness and large coverage. The hydrogel wrinkle formation involves a prepolymerization step which produces oligomers leading to a solution with increased viscosity, enough for doctor blade deposition. Subsequently, the material was exposed to vacuum and plasma to trigger wrinkled pattern formation. Finally, a UV-polymerization treatment was applied to fix the undulations on top. Interestingly, the experimental parameters allowed us to finely tune the wrinkle characteristics (period, amplitude, and orientation). For this study, two main aspects were explored. The first one is related to the role of the substrate functionalization on the wrinkle formation. The second study correlates the deswelling time and its relationship with the dimensions and distribution of the wrinkle pattern. In the first batch, four different 3-(trimethoxysilyl)propyl methacrylate (TSM) concentrations were used to functionalize the substrate in order to enhance the adhesion between hydrogel film and the substrate. The wrinkles formed were characterized in terms of wrinkle amplitude, wavelength, pattern roughness, and surface Young modulus, by using AFM in imaging and force spectroscopy modes. Moreover, the chemical composition of the hydrogel film cross-section and the effect of the plasma treatment were analyzed with confocal Raman spectroscopy. These results demonstrated that an oxidized layer was formed on top of the hydrogel films due to the exposure to an argon plasma., This research was funded by FONDECYT grant number 1170209 and the Article Processing Charges (APC) was funded by Spanish National Science Foundation (CSIC) and the Ministerio de Ciencia, Innovación y Universidades (MINECO) grant number MAT2016-78437-R, FONDOS FEDER, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antimicrobial Polymers for Additive Manufacturing

  • González-Henríquez, Carmen M.
  • Sarabia-Vallejos, Mauricio A.
  • Rodríguez-Hernández, Juan
Three-dimensional (3D) printing technologies can be widely used for producing detailed geometries based on individual and particular demands. Some applications are related to the production of personalized devices, implants (orthopedic and dental), drug dosage forms (antibacterial, immunosuppressive, anti-inflammatory, etc.), or 3D implants that contain active pharmaceutical treatments, which favor cellular proliferation and tissue regeneration. This review is focused on the generation of 3D printed polymer-based objects that present antibacterial properties. Two main different alternatives of obtaining these 3D printed objects are fully described, which employ different polymer sources. The first one uses natural polymers that, in some cases, already exhibit intrinsic antibacterial capacities. The second alternative involves the use of synthetic polymers, and thus takes advantage of polymers with antimicrobial functional groups, as well as alternative strategies based on the modification of the surface of polymers or the elaboration of composite materials through adding certain antibacterial agents or incorporating different drugs into the polymeric matrix., This research was funded by FONDECYT NO 1170209 and Project MAT2016-78437-R, FONDOS FEDER, We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Smart pH-Responsive Antimicrobial Hydrogel Scaffolds Prepared by Additive Manufacturing

  • García Sánchez, Carolina
  • Gallardo Ruiz, Alberto
  • López García, Daniel
  • Elvira, Carlos
  • Azzahti, Asma
  • López-Martínez, Elena
  • Cortajarena, Aitziber L.
  • González-Henríquez, Carmen M.
  • Sarabia-Vallejos, Mauricio A.
  • Rodríguez-Hernández, Juan
We report on the fabrication of 3D printed pH-responsive and antimicrobial hydrogels with a micrometer-scale resolution achieved by stereolithography (SLA) 3D printing. The preparation of the hydrogels was optimized by selecting the most appropriate difunctional polyethylene glycol dimethacrylates (testing cross-linking agents with chain lengths ranging from 2 up to 14 units ethylene glycol) and introducing acrylic acid (AA) as a monofunctional monomer. As a result of the incorporation of AA, the hydrogels described are able to reversibly swell and shrink upon environmental changes on the pH, and the swelling extent is directly related to the amount of AA and can be thus finely tuned. More interestingly, upon optimization of the UV penetration depth employing a photoabsorber (Sudan I), a reliable procedure for the fabrication of 3D objects with a high model accuracy is shown. Finally, the antimicrobial properties of all of the hydrogels were demonstrated using Staphylococcus aureus as a bacterial model. We found that even those hydrogels with a low amount of AA monomeric units presented excellent antimicrobial properties against S. aureus., The authors gratefully acknowledge support from the Consejo Superior de Investigaciones Cientifícas (CSIC). Equally, this work was financially supported by the Ministerio de Economía y Competitividad (MINECO) through MAT2013-47902-C2- 1-R, BIO2016-77367-C2-1-R MAT2013-42957-R, and MAT2016-78437-R (FEDER−EU). The authors acknowledge financial support given by FONDECYT grant no. 1170209. M.A.S.-V. acknowledges the financial support given by CONICYT through the doctoral program scholarship grant. Finally, this study was funded by VRAC grant no. L216-04 of Universidad Tecnológica Metropolitana, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermoresponsive Poly(N-Isopropylacrylamide-co-Dimethylaminoethyl Methacrylate) Microgel Aqueous Dispersions with Potential Antimicrobial Properties

  • Echeverría, Coro
  • Aragón-Gutiérrez, Alejandro
  • Fernández-García, Marta
  • Muñoz-Bonilla, Alexandra
  • López García, Daniel
The work herein describes the preparation of thermoresponsive microgels with potential antimicrobial properties. Most of the work performed so far regarding microgels with antimicrobial activity, deals with the ability of microgels to carry and release antibiotics or antimicrobial agents (antimicrobial peptides). The originality of this work lies in the possibility of developing intrinsic antimicrobial microgels by copolymerization of the well-known thermoresponsive monomer, <i>N</i>-isopropylacrylamide (NIPAM) with dimethylaminoethyl methacrylate (DMAEMA), a water-soluble monomer, to form microgels via precipitation polymerization (radical polymerization). Due to the presence of a tertiary amine in the DMAEMA comonomer, microgels can be modified by <i>N</i>-alkylation reaction with methyl and butyl iodide. This quaternization confers positive charges to the microgel surfaces and thus the potential antimicrobial activity. The effect of DMAEMA content and its quaternization with both, methyl and butyl iodide is evaluated in terms of thermal and surface charge properties, as well as in the microgel size and viscoelastic behavior. Finally, a preliminary study of the antimicrobial activity against different microorganisms is also performed in terms of minimum inhibitory concentration (MIC). From this study we determined that in contrast with butylated microgels, methylated ones show potential antimicrobial activity and good physical properties besides of maintaining microgel thermo-responsiveness., This work was funded by MAT2017-88123-P and MAT2016-78437-R (FEDER–EU). CE also acknowledges IJCI-2015-26432 contract from MINEICO., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polymeric Materials: Surfaces, Interfaces and Bioapplications

  • Muñoz-Bonilla, Alexandra
  • Echeverría, Coro
  • Sonseca, Águeda
  • Arrieta, Marina P.
  • Fernández-García, Marta
This special issue “Polymeric Materials: Surfaces, Interfaces and Bioapplications” was proposed to cover all the aspects related to recent innovations on surfaces, interfaces and bioapplications of polymeric materials. The collected articles show the advances in polymeric materials, which have tremendous applications in agricultural films, food packaging, dental restoration, antimicrobial systems and tissue engineering. We hope that readers will be able to enjoy highly relevant topics that are related to polymers. Therefore, we hope to prove that plastics can be a solution and not a problem., This research was funded by MINECO, Project MAT2016-78437-R, the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU)., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of side chain structure on the thermal and antimicrobial properties of cationic methacrylic polymers

  • Cuervo-Rodríguez, Rocío
  • Muñoz-Bonilla, Alexandra
  • Araujo-Morera, Javier
  • Echeverría, Coro
  • Fernández-García, Marta
A novel methacrylic monomer, 2-(((2-(4-methylthiazol-5-yl)ethoxy)carbonyl)oxy)ethyl methacrylate (MTZ), containing in the lateral chain both hydrolytically sensitive carbonate and thiazole groups has been firstly described. Posterior, it was free-radical polymerized and copolymerized with acrylonitrile in anhydrous solution of dimethylsulfoxide, with the purpose of investigate the influence of its chemical and structural characteristics on the antimicrobial activity. Cationic antimicrobial polymers were subsequently obtained by alkylation reaction with methyl and butyl iodide agents. Their thermal behavior was analyzed in all series, modified and unmodified copolymers in terms of glass transition temperature and thermal stability. The antimicrobial activity in solution was tested against Gram-positive Staphylococcus aureus and Staphylococcus epidermidis, Gram-negative Escherichia coli and Pseudomonas aeruginosa bacteria, and Candida parapsilosis yeast and further correlated with their zeta potential. Then, blends of these cationic polymers with commercial polyacrylonitrile as matrix material were prepared and their effectiveness as antimicrobial coating was determined against Gram-negative Escherichia coli bacteria. In addition and due to the presence of the carbonate groups in the copolymer structures, these systems could be further used as antimicrobial releasing coatings in alkaline conditions., This research was funded by MINECO, Project MAT2016-78437-R, the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU). C.E. acknowledges the Juan de la Cierva contract (IJCI-2015-26432) from MINECO. J.A. acknowledges the JAE-Intro program (JAEINT17_EX_0031) from CSIC for his scholarship., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Porous Microstructured Surfaces with pH-Triggered Antibacterial Properties

  • Campo, Ángel Adolfo del
  • Echeverría, Coro
  • San Martín, Miguel
  • Cuervo-Rodríguez, Rocío
  • Fernández-García, Marta
  • Muñoz-Bonilla, Alexandra
New antibacterial films are designed with the capability to reversibly regulate their killing and repelling functions in response to variations in environmental pH. These systems consist of porous polystyrene surfaces as the main components and a copolymer bearing pH-sensitive thiazole and triazole groups as the minor components. These pH-sensitive groups, located on the surfaces, can be partially protonated at acidic pH levels, increasing the positive charge density of the surfaces and their antibacterial activity. Similarly, their bacterial adhesion and killing efficiencies in response to changes in pH are evaluated by analyzing the bacterial viability of Staphylococcus aureus bacteria on the surfaces under acidic and neutral pH values. It is demonstrated that after only 1 h of incubation with the bacterial suspension in acidic conditions, the surfaces killed the bacteria, while at pH = 7.4, some of the adhered bacteria are removed. Furthermore, the surface topography exerts an important role by intensifying this response., This work was supported financially by the MINECO (Project MAT2016- 78437-R and Project MAT2017-86450-C4-1-R), the Agencia Estatal de Investigación (AEI, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU) and by CSIC (Project 201760I064). C.E. also acknowledges MINECO for her IJCI-2015-26432 contract, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Wrinkled hydrogel surfaces with modulated surface chemistry and topography: evaluation as supports for cell growth and transplant

  • Martínez-Campos, Enrique
  • Gallardo Ruiz, Alberto
  • Luján, Noelia
  • Santos-Coquillat, A.
  • Reinecke, Helmut
  • Campo, Ángel Adolfo del
  • Rodríguez-Hernández, Juan
We report a straightforward procedure to simultaneously functionalize hydrophobic PC supports with vinylpyrrolidone (VP)-based hydrogels with both variable ionic load as well as surface topography, forming wrinkles. The strategy involves three consecutive steps: first, a contact of the polymeric support (PC) with a photopolymerizable solution comprising vinylic monomers is established. Second, UV-light exposure curing of the solution and finally, the third step involes the swelling of the hydrogel network that finally provokes its surface detachment. Interestingly, a wrinkled hybrid PC/hydrogel interface remains after this detachment. Several experimental parameters permitted us to finely control the wrinkle characteristics such as amplitude and period. The experimental parameters that can be varied, herein we will focus on the variation of the elapsed time (i.e., time of contact between the support and the photosensitive monomer mixture, or the solvent (type and amount) included in the monomer mixture. Equally, the nature of the additional ionic methacrylate monomers (M) employed plays a key role on the final topography. According to confocal raman microscopy results, we evidenced that a monomer diffusion into the PC substrate before the UV irradiation step modifies the interfacial (hydrogel/substrate) chemical composition and leads upon UV irradiation to the formation of a thin hydrogel surface layer. The surface chemical composition and structural characteristics were demonstrated to significantly change the surface interaction with different cell lines, affecting cell adhesion, proliferation, or transplantation., The authors gratefully acknowledge support from the Consejo Superior de Investigaciones Cientifícas (CSIC). Equally, thiswork was financially supported by the Ministerio de Economía y Competitividad (MINECO) through MAT2013-47902-C2-1-R, MAT2013-42957-R, and MAT2016-78437-R (FEDER −EU)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrogels based on oxidized starches from different botanical sources for release of fertilizers

  • León, O.
  • Soto, Diana
  • Antúnez, A.
  • Fernández, R.
  • González, Jesús
  • Piña, C.
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
Herein, hydrogels based on starch from corn, sweet cassava and bitter cassava were prepared by a straightforward approach. The hydrogels were obtained by an oxidation process using the redox system KMnO/NaHSO which leads to the formation of carbonyl and carboxyl groups with minimum polymer hydrolysis. The resulting oxidized samples as well as the native starches were extensively characterized by scanning electron microscopy, thermogravimetric analysis and wide angle X-ray scattering, among others. High gel fraction values and low degree of crystallinity were obtained in all the cases, which values vary slightly depending on the botanical source. High swelling capacity was observed for all the samples, which behave as hydrogels. The influence of the ionic strength and pH in the swelling capacity of the oxidized starches was also studied. The samples exhibit an anti-polyelectrolyte behavior and the water uptake increases at basic pH as the carboxylic groups become ionized. The hydrogels were also loaded with urea, potassium nitrate and ammonium sulfate as model fertilizers and their potential for controlled release was investigated., Authors want to acknowledge the Universidad del Zulia for the financial support, in particular CONDES-LUZ and also the MINECO (Project MAT2016-78437-R and Project MAT2017-86450-C4-1-R), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polymers for additive manufacturing and 4D-printing: Materials, methodologies, and biomedical applications

  • González-Henríquez, Carmen M.
  • Sarabia-Vallejos, Mauricio A.
  • Rodríguez-Hernández, Juan
Additive manufacturing (AM), also known as additive manufacturing, permits the fabrication of fully customized objects with a high level of geometrical complexity at reduced fabrication time and cost. Besides metals and ceramics, polymers have become a widely researched class of materials for applications in AM. The synthetic versatility and adaptability, as well as the wide range of properties that can be achieved using polymer materials, have rendered polymers the most widely employed class of materials for AM methodologies. In this review, the basic principles, considering the printing mechanism as well as the advantages and disadvantages, of the most relevant polymer AM technologies are described. The particular features, properties and limitations of currently employed polymer systems in the various AM technology areas are presented and analyzed. Subsequently, 4D printing, that is the fabrication of 3D printed structures that are cabable to change with time, is discussed. A brief description of the polymeric materials and technologies under development for 4D printed structures as well as the different shape changes explored are presented. Finally, based on the characteristics of the polymers employed for each technology illustrative examples of the principal applications are discussed., AcknowledgmentsThe authors acknowledge financial support given by FONDECYTGrant N◦1170209. M.A. Sarabia acknowledges the financial supportgiven by CONICYT through the doctoral program Scholarship Grant.J. Rodriguez-Hernandez acknowledges financial support from the Spanish National Science Foundation (CSIC) and the Ministerio de Economia y Competitividad (MINECO) (Project MAT2016-78437-R, FONDOS FEDER). Finally, this study was funded by VRAC GrantNumber L216-04 of Universidad Tecnológica Metropolitana., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microwrinkled pH-sensitive hydrogel films and their role on the cell adhesion/proliferation

  • González-Henríquez, Carmen M.
  • Galleguillos-Guzmán, S. C.
  • Sarabia-Vallejos, Mauricio A.
  • Santos-Coquillat, A.
  • Martínez-Campos, Enrique
  • Rodríguez-Hernández, Juan
In this work, hydrogels based on HEMA and DMAEMA (pH-sensitive monomer) were used to form biocompatible films which present microwrinkled patterns in their surface, with the focus of exploring the role of chemical composition on cell adhesion and proliferation. Three different pH (5.4, 7.4, and 8.3) were employed to prepare these hydrogels. The pre-polymerized hydrogel mixtures were deposited via spin coating, then exposed to vacuum for deswelling the films and finally, to UV-light to spontaneously generate the wrinkled pattern. By following this procedure, is possible to form a thin rigid layer on the top of the soft and incompletely polymerized hydrogel film which generates, in turn, a wrinkled pattern due to strain mismatch in the interface. FE-SEM and AFM micrographs allowed us to characterize the wrinkled pattern dimensions. The results evidenced that chemical composition is directly related to the surface pattern morphologies obtained, not so in the case of pH variation, which does not generate relevant changes in the pattern morphology. Interestingly, these pH variations resulted in significant alterations on the interface-cell interactions. More precisely, a premyoblastic cell monolayer was cultured over the wrinkled pattern, showing an optimal cell proliferation at neutral pH. Also, the variation of DMAEMA amount on the monomer feed composition employed for the preparation of the wrinkle surfaces revealed that a certain amount is required to favor cell attachment and growth., The authors acknowledge the financial support given by FONDECYT Grant N° 1170209 and FONDEQUIP N° EQM150101 for the use of FESEM facilities. M.A. Sarabia acknowledges the financial support given by CONICYT through the doctoral program Scholarship Grant. J. Rodriguez-Hernandez acknowledges financial support from Ministerio de Economia y Competitividad (MINECO) (Project MAT2016-78437-R FONDOS FEDER and RTI2018-096328-B-I00). Finally, this study was funded by VRAC Grant Number L216-04 of Universidad Tecnológica Metropolitana., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hierarchical Functionalized Polymeric-Ceramic Coatings on Mg-Ca Alloys for Biodegradable Implant Applications

  • Santos-Coquillat, A.
  • Martínez-Campos, Enrique
  • Vargas-Alfredo, Nelson
  • Arrabal, R.
  • Rodríguez-Hernández, Juan
  • Matykina, E.
Magnesium-based implants present several advantages for clinical applications, in particular due to their biocompatibility and degradability. However, degradation products can affect negatively the cell activity. In this work, a combined coating strategy to control the implant degradation and cell regulation processes is evaluated, including plasma electrolytic oxidation (PEO) that produces a 13 µm-thick Ca, P, and Si containing ceramic coating with surface porosity, and breath figures (BF) approach that produces a porous polymeric poly(ε-caprolactone) surface. The degradation of PCL-PEO-coated Mg hierarchical scaffold can be tailored to promote cell adhesion and proliferation into the porous structure. As a result, cell culture can colonize the inner PEO-ceramic coating structure where higher amount of bioelements are present. The Mg/PEO/PCL/BF scaffolds exhibit equally good or better premyoblast cell adhesion and proliferation compared with Ti CP control. The biological behavior of this new hierarchical functionalized scaffold can improve the implantation success in bone and cardiovascular clinical applications., This work was funded by ADITIMAT-CM Programme (S2018/NMT-4411) via Regional Government of Madrid and EU Structural Funds. A.S.-C. is grateful to Regional Government of Madrid and European Social Fund for financial support (PEJD-2018-POST/BMD-9592). The authors gratefully acknowledge financial support from the Spanish National Science Foundation (CSIC) and the Ministerio de Ciencia, Innovación y Universidades grant number MAT2016-78437-R, FONDOS FEDER, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fat-Replacer Properties of Oxidized Cassava Starch Using Hydrogen Peroxide/Sodium Bicarbonate Redox System in Mayonnaise Formulation and Its Stability

  • León, Orietta
  • Soto, Diana
  • López García, Daniel
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
The stability and fat-replacer properties of mayonnaise prepared with oxidized sweet cassava starch is studied. In a first step, the oxidation of starch using different conditions, i.e., thermal and thermochemical processes with the redox pair system (HO/NaHCO), is analyzed. Oxidized starches can be used to produce food grade emulsions without the addition of surfactant, then, the mayonnaise emulsions are prepared using oxidized starch paste as partial substituent of the fat. They show greater stability with respect to the mayonnaise prepared with the native paste due to electro-steric effects and Pickering type that the oxidized starch exerts on the emulsion. The rheological performance of mayonnaises with oxidized starches is analyzed and compared with that of full-fat mayonnaise; demonstrating the oxidized starches applicability as stabilizers and fat-reducers. Finally, a sensory analysis of the mayonnaise emulsions is carried out where all mayonnaise samples are judged to be sensorially acceptable., The authors want to acknowledge the Universidad del Zulia for the partially financial support, in particular CONDES-LUZ. This work was also partially supported financially by the MINECO (Project MAT2016-78437- R), the Agencia Estatal de Investigación (AEI, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Formation of responsive hierarchical wrinkled patterns on hydrogel films via multi-step methodology

  • González-Henríquez, Carmen M.
  • Rodríguez-Umanzor, F. E.
  • Guzmán, D.
  • Sarabia-Vallejos, Mauricio A.
  • Rodríguez-Hernández, Juan
In this article, a simple protocol based on a multi-step methodology is used to form flat, first-generation (G1) or second-generation (G2) wrinkled patterns. Different concentrations of DMAEMA were used to synthesize hydrogel films. The multi-step method used to form the wrinkled pattern involves vacuum, argon plasma, and UV exposure. This methodology allows creating different morphologies, which are intimately related to both the kind of treatment as well as the order employed in each case. The G1 and G2 patterns involve three essential steps. First, water removal via vacuum, generating a deswelling gradient in the films triggering the formation of a G1 pattern on top. Secondly, a frontal vitrification process was induced by argon plasma, which generates a rigid top layer, thus triggering the formation of a G2 pattern. Finally, UV irradiation for fixing the pattern. From these, we obtained the roughness, area increase percentage, undulation wavelength, and amplitude., The authors acknowledge the financial support given by FONDECYT Grant N° 1170209 and N° 3160217. To FONDEQUIP N° EQM150101 for the use of FE-SEM facilities. M.A. Sarabia acknowledges the financial support given by CONICYT through the doctoral program Scholarship Grant. J. Rodriguez-Hernandez acknowledges financial support from Ministerio de Economia y Competitividad (MINECO) (Project MAT2016-78437-R, FONDOS FEDER, and RTI2018-096328-B-I00)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adhesive antibacterial coatings based on copolymers bearing thiazolium cationic groups and catechol moieties as robust anchors

  • Chiloeches, Alberto
  • Echeverría, Coro
  • Cuervo-Rodríguez, Rocío
  • Plachà, D.
  • López-Fabal, Fátima
  • Fernández-García, Marta
  • Muñoz-Bonilla, Alexandra
Herein, we describe a simple approach for the preparation of antibacterial polymeric coatings based on mussel inspired catechol chemistry. A series of statistical copolymers composed of 2-(4-methylthiazol-5-yl)ethyl methacrylate (MTA) and N-(3,4-dihydroxyphenethyl) methacrylamide (DOMA) were synthesized by conventional free radical and reversible addition fragmentation chain transfer (RAFT) polymerizations. Subsequently, the thiazole groups of MTA units were quaternized with methyl and butyl iodide as alkylating agents to provide cationic copolymers with also adhesive anchoring groups of catechol. The copolymers were systematically studied to investigate the effects of composition (MTA/DOMA ratio), molecular weight and alkylating agent on adhesive and antibacterial properties. It was proved that DOMA units play a major role in the adhesion, while the antibacterial activity only decreases slightly with content of DOMA up to 32%. Remarkable, for similar MTA molar equivalent, the copolymers with higher molecular weight exhibit better antimicrobial properties in solution, whereas when they are tethered onto a surface as a coating, the copolymers with lower molecular weight showed enhanced antibacterial performance even against Gram-negative bacteria. These findings confirm that antimicrobial polymers attached onto surfaces behave in a different manner than in solution, and can be more effective as the mobility and accessibility of the cationic groups increase., This work was funded by the MINECO (Project MAT2016-78437-R), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU) and by CSIC (Project I-LINK1191). C. Echeverria also acknowledges MINECO for her IJCI-2015-26432 contract. D. Plachá also thanks to MŠMT CR (Project SP 2019/23)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of polymer composition and substrate on the performance of bioinspired coatings with antibacterial activity

  • Chiloeches, Alberto
  • Echeverría, Coro
  • Fernández-García, Marta
  • Muñoz-Bonilla, Alexandra
© The Author(s)., A series of methacrylic copolymers bearing thiazolium cationic groups and catechol moieties were evaluated as antibacterial coatings on a variety of materials including aluminum and plastics such as polycarbonate, poly(methyl methacrylate), and silicone rubber. The thermal properties of the copolymers were first studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The cationic copolymers were thermally stable up to 200 °C and presented glass transition temperatures values well above 100 °C; thus, an acceptable thermal behavior for typical biomedical applications. The cationic copolymers with variable content of the adhesive anchoring N-(3,4-dihydroxyphenethyl) methacrylamide (DOMA) units were coated onto the metal and polymeric substrates by drop casting and the adhesive properties of the obtained coatings were further evaluated as a function of DOMA content and substrate. Optical profilometry, attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectra, and antimicrobial studies reveal that the coatings adhere stronger to metal substrates than to the polymeric substrates. The copolymers with higher content of DOMA, 24 mol.%, resist solvent erosion treatment when coated onto all substrates and exhibit antimicrobial activity against Gram-positive S. aureus bacteria after this erosion treatment. In contrast, copolymers with low content, 9 mol.% of DOMA, only remain attached onto the aluminum metal substrate after solvent treatment, while on polymeric substrates the coatings are almost removed and do not show any efficacy against S. aureus bacteria., This research was funded by the MINECO (Project MAT2016-78437-R), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU). C. Echeverria also acknowledges MINECO for her IJCI-2015-26432 contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antibacterial PLA Fibers Containing Thiazolium Groups as Wound Dressing Materials

  • Echeverría, Coro
  • Muñoz-Bonilla, Alexandra
  • Cuervo-Rodríguez, Rocío
  • López García, Daniel
  • Fernández-García, Marta
The development of inherent antimicrobial polymeric fibers can contribute to overcoming the increasing problem of infectious diseases and multiresistant microorganisms. Here, we propose the preparation of poly(lactic acid) (PLA) based electrospun fibers blended with poly[2-(4-methylthiazol-5-yl)ethyl methacrylate] (PMTA), which quaternized have proven broad spectrum antimicrobial activity either in solution or solid state. We have demonstrated that quaternized PLA/PMTA fiber mats have a remarkable antibacterial activity against S. aureus. As determined by scanning electron microscopy and Raman spectroscopy, quaternized PMTA segregates toward the outmost surface of PLA/PMTA fiber leaving the thiazolium group widely available onto the fiber surfaces, facilitating the bacteria killing by contact mode., This work was funded by MAT2017-88123-P and MAT2016- 78437-R (FEDER−EU). C.E. also acknowledges IJCI-2015- 26432 contract from MINEICO. The authors also acknowledge Dr. Leoncio Garrido for the feedback in the electrospinning.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Environmentally friendly fertilizers based on starch superabsorbents

  • León, Orietta
  • Soto, D.
  • González, J.
  • Piña, C.
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
Superabsorbents starches (SASs) were synthesized and characterized starting from native corn starch, bitter cassava and sweet cassava by graft copolymerization with itaconic acid. Additionally, their swelling behavior was studied both in water and in buffer solutions with different pHs and saline solutions. Their applicability was tested as environmentally friendly fertilizers in the absorption and release of urea, potassium nitrate and ammonium nitrate at different concentrations of fertilizers. The values of swelling at the equilibrium (H) in water and different media of the graft copolymers demonstrated their superabsorbent capacity, polyelectrolyte behavior, and smart response to environmental stimuli. The percentage of fertilizer absorbed and released from the SASs was a function of the initial concentration of the fertilizer in the medium. The loading and release of SASs were depended on the initial concentration of the fertilizer in the medium as well as the nature, structure, and morphology of the starch used., This research was funded by MINECO, Project MAT2016-78437-R, the Agencia Estatal de Investigación (AEI, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU) and the Universidad del Zulia, CONDES-LUZ
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multifunctional PLA blends containing chitosan mediated silver nanoparticles: Thermal, mechanical, antibacterial, and degradation properties

  • Sonseca, Águeda
  • Madani, S.
  • Rodríguez, Gema
  • Hevilla, Víctor
  • Echeverría, Coro
  • Fernández-García, Marta
  • Muñoz-Bonilla, Alexandra
  • Charef, N.
  • López García, Daniel
Poly(lactic acid) (PLA) is one of the most commonly employed synthetic biopolymers for facing plastic waste problems. Despite its numerous strengths, its inherent brittleness, low toughness, and thermal stability, as well as a relatively slow crystallization rate represent some limiting properties when packaging is its final intended application. In the present work, silver nanoparticles obtained from a facile and green synthesis method, mediated with chitosan as a reducing and stabilizing agent, have been introduced in the oligomeric lactic acid (OLA) plasticized PLA in order to obtain nanocomposites with enhanced properties to find potential application as antibacterial food packaging materials. In this way, the green character of the matrix and plasticizer was preserved by using an eco-friendly synthesis protocol of the nanofiller. The X-ray diffraction (XRD) and differential scanning calorimetry (DSC) results proved the modification of the crystalline structure as well as the crystallinity of the pristine matrix when chitosan mediated silver nanoparticles (AgCH-NPs) were present. The final effect over the thermal stability, mechanical properties, degradation under composting conditions, and antimicrobial behavior when AgCH-NPs were added to the neat plasticized PLA matrix was also investigated. The obtained results revealed interesting properties of the final nanocomposites to be applied as materials for the targeted application., This research was funded by Spanish Ministry of Science, Innovation and Universities (AEI-MICINN/FEDER); Projects MAT2016-78437-R and MAT2017-88123-P.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hemolytic and Antimicrobial Activities of a Series of Cationic Amphiphilic Copolymers Comprised of Same Centered Comonomers with Thiazole Moieties and Polyethylene Glycol Derivatives

  • Cuervo-Rodríguez, Rocío
  • Muñoz-Bonilla, Alexandra
  • López-Fabal, Fátima
  • Fernández-García, Marta
© 2020 by the authors., A series of well-defined antimicrobial polymers composed of comonomers bearing thiazole ring (2-(((2-(4-methylthiazol-5-yl)ethoxy)carbonyl)oxy)ethyl methacrylate monomer (MTZ)) and non-hemotoxic poly(ethylene glycol) side chains (poly(ethylene glycol) methyl ether methacrylate (PEGMA)) were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. By post-polymerization functionalization strategy, polymers were quaternized with either butyl or octyl iodides to result in cationic amphiphilic copolymers incorporating thiazolium groups, thus with variable hydrophobic/hydrophilic balance associated to the length of the alkylating agent. Likewise, the molar percentage of PEGMA was modulated in the copolymers, also affecting the amphiphilicity. The antimicrobial activities of these cationic polymers were determined against Gram-positive and Gram-negative bacteria and fungi. Minimum inhibitory concentration (MIC) was found to be dependent on both length of the alkyl hydrophobic chain and the content of PEGMA in the copolymers. More hydrophobic octylated copolymers were found to be more effective against all tested microorganisms. The incorporation of non-ionic hydrophilic units, PEGMA, reduces the hydrophobicity of the system and the activity is markedly reduced. This effect is dramatic in the case of butylated copolymers, in which the hydrophobic/hydrophilic balance is highly affected. The hemolytic properties of polymers analyzed against human red blood cells were greatly affected by the hydrophobic/hydrophilic balance of the copolymers and the content of PEGMA, which drastically reduces the hemotoxicity. The copolymers containing longer hydrophobic chain, octyl, are much more hemotoxic than their corresponding butylated copolymers., This research was funded by MINECO, Project MAT2016-78437-R, the Agencia Estatal de Investigación (AEI, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication of 3D-Printed Biodegradable Porous Scaffolds Combining Multi-Material Fused Deposition Modeling and Supercritical CO2 Techniques

  • Sanz-Horta, Raúl
  • Elvira, Carlos
  • Gallardo Ruiz, Alberto
  • Reinecke, Helmut
  • Rodríguez-Hernández, Juan
© 2020 by the authors., The fabrication of porous materials for tissue engineering applications in a straightforward manner is still a current challenge. Herein, by combining the advantages of two conventional methodologies with additive manufacturing, well-defined objects with internal and external porosity were produced. First of all, multi-material fused deposition modeling (FDM) allowed us to prepare structures combining poly (ε-caprolactone) (PCL) and poly (lactic acid) (PLA), thus enabling to finely tune the final mechanical properties of the printed part with modulus and strain at break varying from values observed for pure PCL (modulus 200 MPa, strain at break 1700%) and PLA (modulus 1.2 GPa and strain at break 5–7%). More interestingly, supercritical CO2 (SCCO2) as well as the breath figures mechanism (BFs) were additionally employed to produce internal (pore diameters 80–300 µm) and external pores (with sizes ranging between 2 and 12 μm) exclusively in those areas where PCL is present. This strategy will offer unique possibilities to fabricate intricate structures combining the advantages of additive manufacturing (AM) in terms of flexibility and versatility and those provided by the SCCO2 and BFs to finely tune the formation of porous structures., This research was funded by Ministerio de Ciencia, Innovación y Universidades (MAT2013-42957-R, Project MAT2016-78437-R, FONDOS FEDER, RTI2018-096328-B-I00) and Comunidad de Madrid project Biopieltec-CM S2018/BAA-4480., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antibacterial Character of Cationic Polymers Attached to Carbon-Based Nanomaterials

  • Plachá, Daniela
  • Muñoz-Bonilla, Alexandra
  • Škrlová, Kateřina
  • Echeverría, Coro
  • Chiloeches, Alberto
  • Petr, Martin
  • Lafdi, Khalid
  • Fernández-García, Marta
© 2020 by the authors., The preparation of hybrid polymeric systems based on carbon derivatives with a cationic polymer is described. The polymer used is a copolymer of a quaternizable methacrylic monomer with another dopamine-based monomer capable of anchoring to carbon compounds. Graphene oxide and graphene as well as hybrid polymeric systems were widely characterized by infrared, Raman and photoemission X-ray spectroscopies, electron scanning microscopy, zeta potential and thermal degradation. These allowed confirming the attachment of copolymer onto carbonaceous materials. Besides, the antimicrobial activity of hybrid polymeric systems was tested against Gram positive Staphylococcus aureus and Staphylococcus epidermidis and Gram negative Escherichia coli and Pseudomonas aeruginosa bacteria. The results showed the antibacterial character of these hybrid systems., This work was funded by the MINECO (Project MAT2016-78437-R), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU) and by Ministry of Education of the Czech Republic through the SGS project SP2020/70., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modified Starch as a Filter Controller in Water-Based Drilling Fluids

  • Soto, Diana
  • León, Orietta
  • Urdaneta, José
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
© 2020 by the authors., Herein, the effectiveness of an itaconic acid (IA) graft copolymer on native corn starch (NCS) as a filter control agent in fresh water-based drilling fluids (WBDFs) was evaluated. The copolymer (S-g-IA_APS) was synthesized by conventional radical dispersion polymerization using the redox initiation system (NH4)2S2O8/NaHSO3. The modification of the starches was verified by volumetry, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). Then, three WBDFs were formulated in which only the added polymer (NCS, S-g-IA_APS, and a commercial starch (CPS)) was varied to control the fluid losses. The physico-chemical, rheological, and filtering properties of the formulated systems were evaluated in terms of density (ρ), pH, plastic viscosity (µp), apparent viscosity (µa), yield point (Yp), gel strength (Rg), and filtrated volume (VAPI). In order to evaluate the resistance to temperature and contaminants of the WBDFs, they were subjected to high pressure and high temperature filtering (VHPHT). The filter control agents were also subjected to aging and contamination with cement and salt. The S-g-IA_APS addition improved the filtering behavior at a high pressure and temperature by 38%., This research was funded by the MINECO, Project MAT2016-78437-R, the Agencia Estatal de Investigación (AEI, Spain), Fondo Europeo de Desarrollo Regional (FEDER, EU), and the Universidad del Zulia, CONDES-LUZ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biocompatible fluorinated wrinkled hydrogel films with antimicrobial activity

  • González-Henríquez, Carmen M.
  • Rodríguez-Umanzor, F. E.
  • Almagro-Correa, J.
  • Sarabia-Vallejos, Mauricio A.
  • Martínez-Campos, Enrique
  • Esteban-Lucía, M.
  • Campo, Ángel Adolfo del
  • Rodríguez-Hernández, Juan
Surface-modified hydrogel films were designed to control the bacterial colonization on their surface and to promote cell proliferation through the gradual insertion of highly hydrophobic functional monomers. These hydrogel films were deposited via spin-coating technique, using muscovite mica as a substrate. These samples were then exposed to different external stimuli to produce wrinkled patterns. The relationship between the monomers which compose the hydrogel, was varied to alter the hydrophobic/hydrophilic balance of the final composite. Contact angle and confocal Raman spectroscopy measurements were carried out to characterize the surface and the bulk of the hydrogel film. Cell proliferation and antimicrobial tests were performed using premyoblastic murine cells (C2C12-GFP) and RAW 264.7 (ATCC® TIB-71) macrophagic cell lines, and also for bacteria strains, Staphylococcus aureus and Escherichia coli. The results indicate that the inclusion of the TFPMA produces an increase in cell proliferation, together with a decrease in living bacterial colonies after 48 h, both for Gram-positive or Gram-negative species., The authors acknowledge the financial support given by FONDECYT Grant N° 1170209 and FONDEQUIP N° EQM150101 for the use of FESEM facilities. M.A. Sarabia acknowledges the financial support provided by CONICYT through the doctoral program Scholarship Grant. J. Rodriguez-Hernandez acknowledges financial support from Ministerio de Economia y Competitividad (MINECO) (Project MAT2016-78437-R, FONDOS FEDER, and RTI2018-096328-B-I00).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional properties of photo-crosslinkable biodegradable polyurethane nanocomposites

  • Salgado, Cástor
  • Arrieta, Marina P.
  • Sessini, Valentina
  • Peponi, Laura
  • López García, Daniel
  • Fernández-García, Marta
Smart and functional properties of coumarin and PCL-based polyurethane (PU) nanocomposites reinforced with both pristine silica nanoparticles and silica nanoparticles modified with coumarin, have been studied. Coumarin is a photo-responsive derivative, which induces photo-crosslinking when it is incorporated in the PU moieties. Swelling measurements were performed to study the photo-crosslinking fraction and the results are in concordance with the degree of crosslinking (DC) calculated by UV measurements. Shape memory behavior was studied by thermo-mechanical cycles, by measuring the strain recovery and shape fixity ratios of the photo-crosslinked films. The modification of silica nanoparticles allows an improvement in the dispersion of the reinforcements into the PU matrix, which leads to an enhancement of the shape memory properties. Finally, the materials were disintegrated under composting conditions at laboratory scale level to confirm their biodisintegrable behavior., Authors thank Spanish Ministry of Economy, Industry and Competitiveness, MINEICO (MAT2016-MAT2016-78437-R, MAT2017-88123-P, PCIN-2017-036), the Agencia Estatal dInvestigación (AEI, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU). M.P.A. and L.P. acknowledge the Juan de la Cierva (FJCI-2014-20630) and Ramon y Cajal (RYC-2014-15595) contracts from the MINEICO, respectively. V.S. thanks the Wallonia Region, West-Vlaanderen Region, Agentschap Innoveren Ondernemen and European Community (FEDER funds) for the financial support in the frame of the INTERREG V FWVL e BIOHARV project (GoToS3 portofolio
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Innovative procedure for precise deposition of wrinkled hydrogel films using direct inkjet printing

  • González-Henríquez, Carmen M.
  • Rodríguez-Umanzor, F. E.
  • Sarabia-Vallejos, Mauricio A.
  • Terraza, Claudio A.
  • Martínez-Campos, Enrique
  • Rodríguez-Hernández, Juan
This manuscript presents an inkjet-based strategy to fabricate wrinkled hydrogel surfaces with controlled characteristics (period and amplitude). For this purpose, a monomer mixture containing a crosslinking agent, a hydrophilic monomer, and a photoinitiator were deposited onto polycarbonate substrates. Upon UV irradiation and controlled drying under a vacuum atmosphere, either one-generation or hierarchical two-generation wrinkles were formed. More interestingly, the wrinkle characteristics depend on the crosslinking agent and monomer concentration in the solution so that larger wrinkles were observed in diluted solutions. Equally, the wrinkle period and amplitude also gradually grow by increasing the number of deposited layers. Atomic force microscopy was carried out to finely characterize the wrinkle dimensions as well as their eventual preferential orientation and distribution. Besides, hydrogel surfaces have been evaluated in terms of cytocompatibility, given their potential interest for biomedical applications., The authors acknowledge the financial support given by FONDECYT Grant No. 1170209 and FONDEQUIP No. EQM150101 for the use of FESEM facilities. M.A. Sarabia acknowledges the financial support provided by CONICYT through the doctoral program Scholarship Grant. J. Rodriguez-Hernandez acknowledges financial support from Ministerio de Ciencia, Innovación y Universidades (Project MAT2016-78437-R, FONDOS FEDER, and RTI2018-096328-B-I00)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Physical methods for controlling bacterial colonization on polymer surfaces

  • Echeverría, Coro
  • Der Torossian Torres, Marcelo
  • Fernández-García, Marta
  • Fuente-Núñez, César de la
  • Muñoz-Bonilla, Alexandra
The adhesion and formation of microbial biofilm on material surfaces is a relevant problem in many areas including in medicine and biomaterials engineering. Biofilms are the primary cause of persistent infections associated with biomedical devices and clinical settings due to their tolerance and resistance to antimicrobial treatment. Reducing initial bacterial attachment to surfaces could decrease the formation of biofilms and, consequently, the posterior dispersion stage in which bacteria present within biofilms expand to other regions, spreading the infection. In this context, the use of surface topography to minimize microbial infections and biofilm formation represents an emerging area of research as it tackles this problem without the need to use antibiotics or other chemical agents. Herein, we review recent progress in surface topography-based antimicrobial approaches and provide an overview of the influence of micro- and nano-topography on bacterial surface attachment. We focus primarily on structured polymeric surfaces. The versatility and properties of polymer materials, along with their propensity to standardization at different length scales, make them an excellent option for fabrication of numerous medical devices. This work also provides a brief overview of recent advances in patterning polymers using lithography, direct-write patterning techniques, and instability-induced patterning. The impact of micro-, nano- and hierarchical surface structuration on the antimicrobial response of polymeric surfaces is addressed to offer new insights for the preparation of antimicrobial materials., This work was supported financially by “la Caixa” Foundation SEED FUND (project MIT-CAIXA "LCF/PR/MIT17/11820010), by MINECO (Project MAT2016-78437-R), the Agencia Estatal de Investigación (AEI, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU). C.E. also acknowledges MINECO for her IJCI-2015-26432 contract. Cesar de la Fuente-Nunez holds a Presidential Professorship at the University of Pennsylvania, is a recipient of the Langer Prize by the AIChE Foundation, and acknowledges funding from the Institute for Diabetes, Obesity, and Metabolism and the Penn Mental Health AIDS Research Center of the University of Pennsylvania.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of photoresponsive coumarin-modified ethylene-co-vinyl alcohol copolymers with antifouling behavior

  • Salgado, Cástor
  • Arrieta, Marina P.
  • Chiloeches, Alberto
  • Peponi, Laura
  • López García, Daniel
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
In this work, the modification of ethylene-co-vinyl alcohol (EVOH) copolymer with a coumarin derivative, 7- (hydroxyethoxy)-4-methyl coumarin (HEOMC), has been performed through the incorporation of different reactive groups, p-nitrophenyl chloroformate, succinic anhydride and phthalic anhydride as different linkers between coumarin and EVOH with the aim to obtain photo-responsive materials with improved protein absorption resistance. After purification, the modification degree was calculated by nuclear magnetic resonance and ultraviolet- visible spectroscopy. The thermal properties revealed the crystallinity loss and higher maximum degradation temperatures when EVOH is modified with coumarin derivative. Copolymers were successfully photocrosslinked through the photo-responsive behavior of coumarin moieties. The micro-hardness test shown an increase of the mechanical performance due to the coumarin presence. The water contact angle measurements revealed that while coumarin-modified EVOH copolymers present a higher hydrophilic behavior than EVOH, the photo-dimerization process mainly leads to slightly deviations on the surface wettability of neat EVOH. Finally, the absorption of bovine serum albumin onto the surface of the coumarin-modified materials revealed enhanced antifouling properties, particularly after the photo-crosslinked process. Therefore, the introduction of coumarin through different chain extenders leads to functional materials with tunable photo-responsive performance and protein absorption resistance., Authors thank Spanish Ministry of Science and Innovation (Projects MAT2016-78437-R MAT2017-88123-P), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU). M.P.A. and L.P. acknowledge the Juan de la Cierva (FJCI- 2014-20630) and Ramon y Cajal (RYC-2014-15595) contracts from the MINECO, respectively. A.C. also acknowledges his FPU fellowship FPU18/01776., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Succinylated Starches for Dye Removal

  • Soto, Diana
  • León, Orietta
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
Succinylated bitter cassava starches are evaluated for the removal of cationic, methylene blue (MB) and anionic, methyl orange (MO) dyes present in water. The native starch (NS) extracted from bitter cassava by the dry method, is modified using succinic anhydride (SA) as esterifying agent and sodium hydroxide, sodium carbonate, sodium sulfate, and sodium chloride as non-toxic and environmentally friendly catalysts. The effect of the type and concentration of catalyst on the modification is evaluated. Starch replacement with SA is confirmed by Fourier transform infrared spectroscopy, wide-angle X-ray diffraction, thermogravimetric analysis, and scanning electron microscopy. The degree of substitution in the resulting succinylated starches is determined by volumetric analysis, presenting high values (0.5–0.9). These materials act as superabsorbent gels, sensitive to changes in pH and ionic strength, and mostly with anti-polyelectrolytic behavior. MB dye has a higher affinity for succinylated starches than the MO dye. The removal capacity of MB is also influenced by the pH and the ionic strength of the solution. The kinetics and adsorption isotherms are satisfactorily adjusted to the pseudo-second order and Freundlich models, respectively. The esters functionalities of the starch prove to be reusable adsorbents, completing successfully five cycles of adsorption-desorption., This research was funded by MINECO, Project MAT2016-78437-R, the Agencia Estatal de Investigación (AEI, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU) and the Universidad del Zulia, CONDES-LUZ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication of porous films from immiscible polymer blends: Role of the surface structure on the cell adhesion

  • Akoumeh, R.
  • Elzein, T.
  • Martínez-Campos, Enrique
  • Reviriego, Felipe
  • Rodríguez-Hernández, Juan
We report the preparation of microporous surfaces prepared from immiscible polymer blends using the Breath Figures methodology. The selected polymer blend is formed by two biodegradable polymers i.e. poly(ε-caprolactone) and poly(lactic acid) both known to be biocompatible and presenting two distinct kinetics of biodegradation. These two polymers form immiscible polymer blends upon solvent casting in low relative humidity conditions. However, when quenching the melt using fast cooling processes or by evaporation in a moist atmosphere, micrometer size phase-separated domains have been clearly identified by Raman Confocal. This allowed us to analyze cell adhesion as well as proliferation on both planar (those obtained from melt quenching) and microporous surfaces (those obtained by the breath figures approach) formed from different blend compositions. Using C166-GFP and RAW264.7 cell types as a model we could observe an improved adhesion of the C166-GFP on top of the microporous surfaces evidencing the role of the surface topography on the cell adhesion process. In addition, preliminary results on the RAW264.7 cell adhesion indicated the polarization to M2 phenotypes instead of M1 which is a pre-requisite for the potential use of this material for implantology purposes., We gratefully acknowledge financial support from the Spanish National Science Foundation (CSIC) and the Ministerio de Ciencia, Innovacion ´ y Universidades (MINECO) grant number MAT2016-78437- R, FONDOS FEDER and RTI2018-096328-B-I00. The authors would like to acknowledge the International Atomic Energy Agency (IAEA) for providing the necessary expenses for the fellowship (Code No.: C6/LEB/ 17004), and the Lebanese Atomic Energy Commission of the National Council of Scientific Research in Lebanon.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical Hydrogels Bearing Thiazolium Groups with a Broad Spectrum of Antimicrobial Behavior

  • Muñoz-Bonilla, Alexandra
  • Zagora, Jakub
  • Plachá, Daniela
  • Echeverría, Coro
  • Chiloeches, Alberto
  • Fernández-García, Marta
© 2020 by the authors., Several hydrogels based on 2-hydroxyethyl methacrylate and a methacrylic monomer containing a thiazole group in its lateral chain have been prepared by thermal polymerization at 60 °C in water solution varying the chemical composition of the gels. The posterior quaternization of the thiazole groups with methyl iodine has rendered positively charged hydrogels with potential antimicrobial activity. This modification has been structurally characterized by infrared spectroscopy, whereas the thermal stability of all hydrogels has been studied by thermal degradation in inert atmosphere. The swelling behavior in distilled water and the rheology of the different hydrogels have been analyzed as a function of 2-(4-methylthiazol-5-yl)ethyl methacrylate (MTA) monomer content as well as its methylation. Finally, the active character of hydrogels against Gram-positive and Gram-negative bacteria and fungi has been evaluated, revealing excellent antimicrobial activity against all tested microorganisms. The methylated hydrogels could be used as potential materials for wound healing or contact lens applications., This work was funded by the CSIC (i-LINK4911), MINECO (Project MAT2016-78437-R), MICINN (PID2019-104600RB-I00), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU) and by Ministry of Education of the Czech Republic through the SGS project SP2020/70 and project No. CZ.02.1.01/0.0/0.0/17\_049/0008441 “Innovative Therapeutic Methods of Musculoskeletal System in Accident Surgery” within the Operational Programme Research, Development, and Education., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Incorporation of Poly(Itaconic Acid) with Quaternized Thiazole Groups on Gelatin-Based Films for Antimicrobial-Active Food Packaging

  • Cottet, Celeste
  • Salvay, Andrés G.
  • Peltzer, M.
  • Fernández-García, Marta
Poly(itaconic acid) (PIA) was synthesized via conventional radical polymerization. Then, functionalization of PIA was carried out by an esterification reaction with the heterocyclic groups of 1,3-thiazole and posterior quaternization by N-alkylation reaction with iodomethane. The modifications were confirmed by Fourier transform infrared (FTIR) and proton nuclear magnetic resonance (<sup>1</sup>H-NMR), as well as ζ-potential measurements. Their antimicrobial activity was tested against different Gram-negative and Gram-positive bacteria. After characterization, the resulting polymers were incorporated into gelatin with oxidized starch and glycerol as film adjuvants, and dopamine as crosslinking agent, to develop antimicrobial-active films. The addition of quaternized polymers not only improved the mechanical properties of gelatin formulations, but also decreased the solution absorption capacity during the swelling process. However, the incorporation of synthesized polymers increased the deformation at break values and the water vapor permeability of films. The antioxidant capacity of films was confirmed by radical scavenging ability and, additionally, those films exhibited antimicrobial activity. Therefore, these films can be considered as good candidates for active packaging, ensuring a constant concentration of the active compound on the surface of the food, increasing products’ shelf-life and reducing the environmental impact generated by plastics of petrochemical origin., This work has been possible thanks to the support of the Agencia Nacional de Promoción Científica y Tecnológica (Argentina) through PICT-2015-3150, the Universidad Nacional de Quilmes (UNQ, Argentina) through R&D program PUNQ 990/19 and MINECO (MAT2016-78437-R; AEI, Spain and FEDER, EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid biocomposites based on poly(lactic acid) and silica aerogel for food packaging applications

  • Aragón-Gutiérrez, Alejandro
  • Arrieta, Marina P.
  • López-González, Mar
  • Fernández-García, Marta
  • López García, Daniel
Bionanocomposites based on poly (lactic acid) (PLA) and silica aerogel (SiA) were developed by means of melt extrusion process. PLA-SiA composite films were plasticized with 15 wt.% of acetyl (tributyl citrate) (ATBC) to facilitate the PLA processability as well as to attain flexible polymeric formulations for films for food packaging purposes. Meanwhile, SiA was added in four dierent proportions (0.5, 1, 3 and 5 wt.%) to evaluate the ability of SiA to improve the thermal, mechanical, and barrier performance of the bionanocomposites. The mechanical performance, thermal stability as well as the barrier properties against dierent gases (carbon dioxide, nitrogen, and oxygen) of the bionanocomposites were evaluated. It was observed that the addition of 3 wt.% of SiA to the plasticized PLA-ATBC matrix showed simultaneously an improvement on the thermal stability as well as the mechanical and barrier performance of films. Finally, PLA-SiA film formulations were disintegrated in compost at the lab-scale level. The combination of ATBC and SiA sped up the disintegration of PLA matrix. Thus, the bionanocomposites produced here show great potential as sustainable polymeric formulations with interest in the food packaging sector., This research was funded by the Spanish Ministry of Economy, Industry, and Competitiveness (MINEICO) (MAT2013-48059-C2-1-R, MAT2016-78437-R and MAT2016-81001-P)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Breath figures makes porous the “so-called” skin layer obtained in polymer foams prepared by supercritical CO2 treatments

  • Sanz-Horta, Raúl
  • Martínez-Campos, Enrique
  • García Sánchez, Carolina
  • Reinecke, Helmut
  • Gallardo Ruiz, Alberto
  • Rodríguez-Hernández, Juan
  • Elvira, Carlos
In this article, the preparation of porous polymeric scaffolds of the synthetic poly (isopropylideneglycerol methacrylate) (PIPGMA) is described combining two complementary techniques. Supercritical CO (SCCO), has been used as foaming agent to obtain internal porosity by varying parameters such as pressure and depressurization time. However, the disadvantage of SCCO technology is the formation of a non-porous skin layer described in the majority of the samples. This skin layer was modified by the breath figures technique (BF), providing superficial porosity to the polymeric sample. The result of using both techniques subsequently showed the formation of a porous network throughout the samples with inner and outer pores interconnected, characterized by scanning electron microscopy (SEM), micro X-ray computerized tomography scanning (micro CT), and processing those images with Image J. Finally, preliminary biological evaluation of the porous samples has been carried out in order to evaluate the biocompatibility and cellular viability of these scaffolds., We gratefully acknowledge financial support from the Consejo Superior de Investigaciones Científicas (CSIC) and the Ministerio de Ciencia, Innovación y Universidades (MINECO) grant num-ber MAT2013-42957-R, and MAT2016-78437-R (FONDOS FEDER),RTI2018-096328-B-I00, and to Comunidad de Madrid project Biopieltec-CM S2018/BAA-4480.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional Biodegradable Nanocomposites

  • Sonseca, Águeda
  • Echeverría, Coro
  • López García, Daniel
Over 367 million tons of plastics are produced annually worldwide, and the growth of plastic pollution has become a global concern [...], This research was funded by Spanish Ministry of Science and Innovation (AEIMICINN/FEDER); Projects MAT2016-78437-R, MAT2017-88123-P and PCIN-2017-036 and by the Valencian Autonomous Government, Generalitat Valenciana, GVA (GV/2021/182). A. S. acknowledges her “APOSTD/2018/228” and “PAID-10-19” postdoctoral contracts from the Education, Research, Culture and Sport Council from the Government of Valencia and from the Polytechnic University of Valencia, respectively. C.E. acknowledges IJCI-2015-26432 contract from MICINN., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Smart Polymer Surfaces with Complex Wrinkled Patterns: Reversible, Non-Planar, Gradient, and Hierarchical Structures

  • Sarabia-Vallejos, Mauricio A.
  • Cerda-Iglesias, Felipe E.
  • Pérez-Monje, Dan A.
  • Acuña-Ruiz, N.F.
  • Terraza-Inostroza, C. A.
  • Rodríguez-Hernández, Juan
  • González-Henríquez, Carmen M.
This review summarizes the relevant developments in preparing wrinkled structures with variable characteristics. These include the formation of smart interfaces with reversible wrinkle formation, the construction of wrinkles in non-planar supports, or, more interestingly, the development of complex hierarchically structured wrinkled patterns. Smart wrinkled surfaces obtained using light-responsive, pH-responsive, temperature-responsive, and electromagnetic-responsive polymers are thoroughly described. These systems control the formation of wrinkles in particular surface positions and the reversible construction of planar-wrinkled surfaces. This know-how of non-planar substrates has been recently extended to other structures, thus forming wrinkled patterns on solid, hollow spheres, cylinders, and cylindrical tubes. Finally, this bibliographic analysis also presents some illustrative examples of the potential of wrinkle formation to create more complex patterns, including gradient structures and hierarchically multiscale-ordered wrinkles. The orientation and the wrinkle characteristics (amplitude and period) can also be modulated according to the requested application., The authors recognize the financial support from FONDECYT Grant N◦ 1220251 and N◦ 11230427. M.A. Sarabia-Vallejos acknowledges financial support from Universidad San Sebastián (USS) via project No. VRID FAI 21/17. J. Rodriguez-Hernandez acknowledges financial support from Ministerio de Ciencia, Innovación y Universidades (Project MAT2016-78437-R, FONDOS FEDER, and RTI2018-096328-B-I00). Finally, we thank the PIT FAB3D, PTI + Salud Global, and the PTI + SUSPLAST from CSIC for their support, Peer reviewed