Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 73
Encontrada(s) 1 página(s)

Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

TALN-UPF: taxonomy learning exploiting CRF-based hypernym extraction on encyclopedic definitions

  • Espinosa-Anke, Luis
  • Saggion, Horacio
  • Ronzano, Francesco
This paper describes the system submitted by the TALN-UPF team to SEMEVAL Task 17 (Taxonomy Extraction Evaluation). We present a method for automatically learning a taxonomy from a flat terminology, which benefits from a definition corpus obtained by querying the BabelNet semantic network. Then, we combine a machine-learning algorithm for term-hypernym extraction with linguistically-motivated heuristics for hypernym decomposition. Our approach performs well in terms of vertex coverage and newly added vertices, while it shows room for improvement in terms of graph topology, edge coverage and precision of novel edges., Paper presented at 9th International Workshop on Semantic Evaluation (SemEval 2015);2015 June 4-5; Denver, Colorado., This work is partially funded by the SKATER project, TIN2012-38584-C06-03, Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, España; and project Dr. Inventor (FP7-ICT-2013.8.1 611383).
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

Towards the automatic classification of complex-type nominals

  • Romeo, Lauren
  • Mendes, Sara
  • Bel Rafecas, Núria
Comunicació presentada a: 6th International Conference on Generative Approaches to the Lexicon, celebrada a Pisa, Itàlia, del 24 al 25 de setembre del 2013., The work presented here depicts experiments toward the automatic classification of complex-type nominals using distributional information. We conducted two experiments: classifying complex-type nominals as members of multiple individual lexical classes, and building a dedicated classifier for complex-type nominals, distinguishing them from simple types. We discuss the promising results obtained, with a focus on asymmetries observed and on lines to be explored in the future., This work was funded with the support of the SUR of the DEC of the Generalitat de Catalunya and the European Social Fund, by SKATER TIN2012-38584-C06-05 and by Fundação para a Ciência e a Tecnologia (FCT) post-doctoral fellowship SFRH/BPD/79900/2011.
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

Applying dependency relations to definition extraction

  • Espinosa-Anke, Luis
  • Saggion, Horacio
Comunicació presentada a la International Conference on Applications of Natural Language to Data Bases/Information Systems celebrada del 18 al 20 de juny de 2014 a Montpellier, França., Definition Extraction (DE) is the task to automatically identify definitional knowledge in naturally-occurring text. This task has applications in ontology generation, glossary creation or question answering. Although the traditional approach to DE has been based on hand-crafted pattern-matching rules, recent methods incorporate learning algorithms in order to classify sentences as definitional or non-definitional. This paper presents a supervised approach to Definition Extraction in which only syntactic features derived from dependency relations are used. We model the problem as a classification task where each sentence has to be classified as being or not definitional. We compare our results with two well-known approaches: First, a supervised method based on Word-Class Lattices and second, an unsupervised approach based on mining recurrent patterns. Our competitive results suggest that syntactic information alone can contribute substantially to the development and improvement of DE systems., We also acknowledge partial support from project Dr. Inventor (FP7-ICT-2013.8.1 611383), programa Ramón y Cajal 2009 (RYC- 2009-04291), and project number TIN2012-38584-C06-03 from Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain.
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

A deeper exploration of the standard PB-SMT approach to text simplification and its evaluation

  • Štajner, Sanja
  • Béchara, Hannah
  • Saggion, Horacio
Comunicació presentada a: the 53rd Annual Meeting of the Association for Computational Linguistics and the 7th International Joint Conference on Natural Language Processing del 26 al 31 de juliol de 2015 a Beijing, Xina., In the last few years, there has been a growing number of studies addressing the Text Simplification (TS) task as a monolingual machine translation (MT) problem which translates from ‘original’ to ‘simple’ language. Motivated by those results, we investigate the influence of quality vs quantity of the training data on the effectiveness of such a MT approach to text simplification. We conduct 40 experiments on the aligned sentences from English Wikipedia and Simple English Wikipedia, controlling for: (1) the similarity between the original and simplified sentences in the training and development datasets, and (2) the sizes of those datasets. The results suggest that in the standard PB-SMT approach to text simplification the quality of the datasets has a greater impact on the system performance. Additionally, we point out several important differences between cross-lingual MT and monolingual MT used in text simplification, and show that BLEU is not a good measure of system performance in text simplification task., The research described in this paper was partially funded by the project SKATER-UPFTALN (TIN2012-38584-C06-03), Ministerio de Econom´ıa y Competitividad, Secretar´ıa de Estado de Investigaci´on, Desarrollo e Innovaci´on, Spain, and the project ABLE-TO-INCLUDE (CIP-ICTPSP- 2013-7/621055). Hannah B´echara is supported by the People Programme (Marie Curie Actions) of the European Union’s Seventh Framework Programme FP7/2007-2013/ under REA grant agreement no. 31747.
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

Weakly supervised definition extraction

  • Espinosa-Anke, Luis
  • Ronzano, Francesco
  • Saggion, Horacio
Paper presented at International Conference on Recent Advances in Natural Language Processing 2015 (RANLP 2015), Definition Extraction (DE) is the task to extract textual definitions from naturally occurring text. It is gaining popularity as a prior step for constructing taxonomies, ontologies, automatic glossaries or dictionary entries. These fields of application motivate greater interest in well-formed encyclopedic text from which to extract definitions, and therefore DE for academic or lay discourse has received less attention. In this paper we propose a weakly supervised bootstrapping approach for identifying textual definitions with higher linguistic variability than the classic encyclopedic genus-et-differentia definition, and take the domain of Natural Language Processing as a use case. We also introduce a novel set of features for DE and explore their relevance. Evaluation is carried out on two datasets that reflect opposed ways of expressing definitional knowledge., This work is partially funded by the SKATER project, TIN2012-38584-C06-03, Ministerio de Econom´ıa y Competitividad, Secretar´ıa de Estado de Investigaci´on, Desarrollo e Innovaci´on, Espa˜na; and Dr. Inventor (FP7-ICT-2013.8.1 611383).
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

Class-based word sense induction for dot-type nominals

  • Romeo, Lauren
  • Martínez Alonso, Héctor
  • Bel Rafecas, Núria
Comunicació presentada a: 6th International Conference on Generative Approaches to the Lexicon, celebrada a Pisa, Itàlia, del 24 al 25 de setembre del 2013., This paper describes an effort to capture the sense alternation of dot-type nominals using Word Sense Induction (WSI). We propose dot-type nominals generate more semantically consistent groupings when clustered into more than two clusters, accounting for literal, metonymic and underspecified senses. Using a class-based approach, we replace individual lemmas with a placeholder representing the entire dot type, which also compensates for data sparsity. Although the distributional evidence does not motivate an individual cluster for each sense, we discuss how our results empirically support theoretical proposals regarding dot types., This work was funded with the support of the SUR of the DEC of the Generalitat de Catalunya and the European Social Fund, by the European Commission’s 7th Framework Program under grant agreement 238405 (CLARA) and by SKATER TIN2012-38584-C06-05.
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

Reading between the lines: overcoming data sparsity for accurate classification of lexical relationships

  • Necşulescu, Silvia
  • Mendes, Sara
  • Jurgens, David
  • Bel Rafecas, Núria
  • Navigli, Roberto
Comunicació presentada a: 4th Joint Conference on Lexical and Computational Semantics, celebrada a Denver, Colorado, Estats Units d'Amèrica, del 4 al 5 de juny de 2015., The lexical semantic relationships between word pairs are key features for many NLP tasks. Most approaches for automatically classifying related word pairs are hindered by data sparsity because of their need to observe two words co-occurring in order to detect the lexical relation holding between them. Even when mining very large corpora, not every related word pair co-occurs. Using novel representations based on graphs and word embeddings, we present two systems that are able to predict relations between words, even when these are never found in the same sentence in a given corpus. In two experiments, we demonstrate superior performance of both approaches over the state of the art, achieving significant gains in recall., The authors gratefully acknowledge the support of the CLARA project (EU-7FP-ITN-238405), the SKATER project (Ministerio de Economia y Competitividad, TIN2012-38584-C06-05) and of the MultiJEDI ERC Starting Grant no. 259234.
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

A cascade approach for complex-type classification

  • Romeo, Lauren
  • Mendes, Sara
  • Bel Rafecas, Núria
Comunicació presentada a: Ninth International Conference on Language Resources and Evaluation, celebrada a Reykjavik, Iceland, del 26 al 31 de maig de 2014., The work detailed in this paper describes a 2-step cascade approach for the classification of complex-type nominals. We describe an experiment that demonstrates how a cascade approach performs when the task consists in distinguishing nominals from a given complex-type from any other noun in the language. Overall, our classifier successfully identifies very specific and not highly frequent lexical items such as complex-types with high accuracy, and distinguishes them from those instances that are not complex types by using lexico-syntactic patterns indicative of the semantic classes corresponding to each of the individual sense components of the complex type. Although there is still room for improvement with regard to the coverage of the classifiers developed, the cascade approach increases the precision of classification of the complex-type nouns that are covered in the experiment presented., This work was funded with the support of the SUR of the DEC of the Generalitat de Catalunya and the European Social Fund, by SKATER TIN2012-38584-C06-05, and by Fundação para a Ciência e a Tecnologia (FCT) post-doctoral fellowship SFRH/BPD/79900/2011.
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

Boosting the creation of a treebank

  • Arias Badia, Blanca
  • Bel Rafecas, Núria
  • Fomicheva, Marina
  • Larrea Mendizabal, Imanol
  • Lorente, Mercè
  • Marimon, Montserrat
  • Milà-Garcia, Alba
  • Vivaldi, J. (Jorge), 1952-
  • Padró, Muntsa
Comunicació presentada al 9th International Conference on Language Resources and Evaluation (LREC'14), celebrat del 26 al 31 de maig de 2014 a Reykjavík, Islàndia., We present the results of the experiment of bootstrapping a Treebank for Catalan by using a Dependency Parser trained with Spanish sentences. In order to save time and cost, our approach was to profit from the typological similarities between Catalan and Spanish to create a first Catalan data set quickly by (i) automatically annotating with a delexicalized Spanish parser, (ii) manually correcting the parses, and (iii) using the Catalan corrected sentences to train a Catalan parser. The results showed that the number of parsed sentences required to train a Catalan parser is about 1000, which were achieved in 4 months with 2 annotators., This work was partially supported by the SKATER project (Ministerio de Economía y Competitividad, TIN2012-38584-C06-05).
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

Hypernym extraction: combining machine-learning and dependency grammar

  • Espinosa-Anke, Luis
  • Ronzano, Francesco
  • Saggion, Horacio
Comunicació presentada a la 16th International Conference, (CICLing) celebrada del 14 al 20 d'abril de 2015 a El Caire, Egipte., Hypernym extraction is a crucial task for semantically motivated NLP tasks such as taxonomy and ontology learning, textual entailment or paraphrase identification. In this paper, we describe an approach to hypernym extraction from textual definitions, where machine-learning and post-classification refinement rules are combined. Our best-performing configuration shows competitive results compared to state-of-the-art systems in a well-known benchmarking dataset. The quality of our features is measured by combining them in different feature sets and by ranking them by their Information Gain score. Our experiments confirm that both syntactic and definitional information play a crucial role in the hypernym extraction task., This work is partially funded by the SKATER project, TIN2012-38584- C06-03, Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, España; and Dr. Inventor (FP7-ICT-2013.8.1 611383), programa Ramón y Cajal 2009 (RYC-2009-04291).
Repositorio Digital de la UPF
Publicación Contribución de congreso (ConferenceOutput)

Choosing which to use? A study of distributional models for nominal lexical semantic classification

  • Romeo, Lauren
  • Lebani, Gianluca E.
  • Bel Rafecas, Núria
  • Lenci, Alessandro
Comunicació presentada a: Ninth International Conference on Language Resources and Evaluation, celebrada a Reykjavik, Iceland, del 26 al 31 de maig de 2014., This paper empirically evaluates the performances of different state-of-the-art distributional models in a nominal lexical semantic classification task. We consider models that exploit various types of distributional features, which thereby provide different representations of nominal behavior in context. The experiments presented in this work demonstrate the advantages and disadvantages of each model considered. This analysis also considers a combined strategy that we found to be capable of leveraging the bottlenecks of each model, especially when large robust data is not available., This work was funded with the support of the SUR of the DEC of the Generalitat de Catalunya and the European Social Fund, by SKATER TIN2012-38584-C06-05 and the EBES-IULA/UPF mobility grant, as well as the PRIN grant 20105B3HE8 ”Word Combinations in Italian: theoretical and descriptive analysis, computational models, lexicographic layout and creation of a dictionary”, funded by the Italian Ministry of Education, University and Research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Recommending Learning Videos for MOOCs and Flipped Classrooms

  • Jordán, Jaume|||0000-0003-0400-9136
  • Valero Cubas, Soledad|||0000-0003-4565-326X
  • Turró Ribalta, Carlos|||0000-0002-3840-9405
  • Botti V.|||0000-0002-6507-2756
[EN] New teaching approaches are emerging in higher education, such as flipped classrooms. In addition, academic institutions are offering new types of training like Massive Online Open Courses. Both of these new ways of education require high-quality learning objects for their success, with learning videos being the most common to provide theoretical concepts. This paper describes a hybrid learning recommender system based on content-based techniques, which is able to recommend useful videos to learners and teachers from a learning video repository. This hybrid technique has been successfully applied to a real scenario such as the central video repository of the Universitat Politècnica de València., This work was partially supported by MINECO/FEDER RTI2018-095390-B-C31 and TIN2017-89156-R projects of the Spanish government, and PROMETEO/2018/002 project of Generalitat Valenciana. J. Jordán and V. Botti are funded by UPV PAID-06-18 project. J. Jordán is also funded by grant APOSTD/2018/010 of Generalitat Valenciana - Fondo Social Europeo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Obtención del Espectro Primario de Rayos X con los Códigos PENELOPE Y MCNPS

  • Pozuelo, Fausto
  • Querol Vives, Andrea
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Ródenas Diago, José|||0000-0003-3283-9188
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[ES] Conocer el espectro primario de rayos X es muy importante en el Control de Calidad de los tubos de rayos X, ya que permite conocer mejor, y por tanto reducir, la dosis impartida a los pacientes. Sin embargo, obtener el espectro primario resulta complicado para los controles rutinarios, de ahí que se midan los parámetros de calidad del espectro, en lugar de obtener su espectro primario. En este caso, se utilizan los códigos PENELOPE y MCNP5, basados en el método Monte Carlo, para obtener el espectro de rayos X teniendo en cuenta las características del tubo de rayos X. Con el fin de conseguir un mayor ajuste del espectro simulado al teórico, se ha realizado un análisis de sensibilidad de los parámetros disponibles en ambos códigos. La obtención del espectro simulado podría suponer una mejora dentro del control de calidad de los tubos de rayos X al incorporarlo como un método complementario a las técnicas utilizadas. Los espectros simulados se han comparado con sus respectivos teóricos, extraídos del catalogo IPEM-78, mediante el cálculo del error cuadrático mínimo y los parámetros de calidad del espectro como la capa de hemirreducción. Esta comparación permite determinar que la simulación obtenida es aceptable. Del análisis de sensibilidad realizado con el código PENELOPE se ha obtenido que el parámetro FORCE es una de las variables más importantes para conseguir un buen ajuste entre el espectro simulado y el teórico. La elección de su valor debe ser óptima, de modo que se obtenga un buen ajuste al espectro teórico con un tiempo de computación aceptable. Los resultados obtenidos demuestran que para conseguir un mejor ajuste es necesario un valor alto de FORCE, sin embargo esto aumenta el tiempo de computación. Por otra parte, se ha observado que con un valor bajo de este parámetro no se obtienen importantes diferencias en cuanto a la dosis en profundidad y si se consigue disminuir el tiempo de computación., Este trabajo, ha sido parcialmente financiado por la Generalitat Valenciana dentro del proyecto de investigación GVPRE/2008/136, y la Universitat Politècnica de València dentro del proyecto PAID‐06‐07‐3300. Así como por la beca de Formación de Profesorado Universitario (FPU) del Ministerio de Educación y Ciencia, referencia AP2009‐2600.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

CLARA: Semi-automatic Retraining System

  • Campos-Mocholí, Mario|||0009-0009-4721-2207
  • Chacón-Albero, Oriol de la Pau
  • Julian, Vicente|||0000-0002-2743-6037
  • Botti V.|||0000-0002-6507-2756
  • Marco-Detchart, Cédric
  • Rincón-Arango, Jaime Andrés
[EN] Recent advancements in computer vision have led to humanlevel performance in image recognition tasks, but challenges persist in real-world applications due to differences in data distribution. This paper introduces CLARA, a semi-automatic framework designed to continually retrain computer vision models by incorporating expert annotation of new data. The system was tested in a production environment with a waste image classification model and showed improved performance and robustness against evolving data distributions. This approach encourages collaboration among stakeholders in waste management and utilizes human-in-the-loop strategies to enhance model accuracy. The framework is adaptable to various models and tasks and, additionally, supports fusion techniques that combine outputs from multiple models to improve prediction robustness and overall system reliability., This work was partially supported with grant tPID2021- 123673OB-C31 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe , grant CIPROM/2021/077 from the Conselleria de Innovació, Universitats, Ciencias i Societat Digital GVA - PROMETEO, grant PAID-06-23 by the Vice Rectorate Office for Research from UPV and project Reciclaje Inteligente y Cooperativo en Toda la Cadena de Valor Orientado a Una Sociedad Sostenible 360º (INNEST/2022/180) from AVI.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Post-fire Behaviour of Stainless Steel Rebars

  • Hernández-Figueirido, David
  • Piquer, Ana
  • Roig-Flores, Marta
  • Lapuebla-Ferri, Andrés|||0000-0001-9667-236X
  • Albero, V|||0000-0001-7193-9232
  • Pons Aliaga, David|||0000-0002-9034-9550
  • Ibáñez, Carmen|||0000-0002-9354-5637
[EN] Stainless steel rebars (SSR) offer significant advantages for reinforced concrete structures, especially in environments where corrosion is a major concern. Also, SSR exhibit excellent mechanical strength, high ductility, and reliable performance at elevated temperatures. However, SSR are less commonly used than carbon steel rebars (CSR) mainly due to their higher cost. This cost factor likely contributes to the limited research on the mechanical properties of SSR after exposure to high temperatures. In the present study, an experimental campaign was conducted on duplex SSR of various grades and production routes (hot-rolled and cold-formed) to evaluate their response following exposure to elevated temperatures. Specimens were heated to temperatures up to 1000 ºC and posteriorly cooled in air to room temperature. Afterwards, specimens underwent tensile testing to obtain the residual mechanical properties, including yield strength, ultimate strength, Young¿s modulus, ultimate strain and strain at fracture. The residual values were compared with results obtained in similar tests conducted on CSR. Findings indicate that SSR, after cooling down, fully recover their yield and ultimate strengths and exhibit a greater residual ductility compared to CSR, even in cold-formed specimens., The authors gratefully acknowledge Universitat Politècnica de València for the help provided through the Project STAINPOST (financial grant for first research projects, reference PAID-06-23) and the company ACERINOX for providing the test specimens.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Identification of the system character through accumulated charge curve

  • Martínez-Ibernón, Ana|||0000-0003-2136-5650
  • Ramón Zamora, José Enrique
  • Bataller, Román
  • Soto Camino, Juan
[EN] The corrosion rate in metals is usually studied by means of the application a potential signal with the purpose of leading the system to unbalance conditions, due to an electric current response is produced. This response is recorded and processed through the electric circuit analogy. Doing the fitting of the response to the properly model is getting the corrosion current. The application of voltammetric potential pattern to the analysis of corrosion, it is very useful, because does not produce polarization of the system. There fore, with this technique is possible to perform tests in sequence without the results being affected. Furthermore, through the integration over time of the electric current response, the accumulated electric charge curve is got which is very useful to the quickly identification of the system behaviour (faradic or non-faradic behaviour). In this paper, it is showed the capability of characterization a system through the accumulated electric charge; it allows identifying at a glance if the system has a faradic behaviour or a non-faradic behaviour. This will be very effective in the monitoring of the metal elements that are out of sight, such as: buried metal conduits or the reinforcement bars in the reinforcement concrete structures., The authors would like to express their gratitude to the Spanish Ministry of Science and Innovation for the pre-doctoral scholarship granted to Ana Martínez Ibernón (FPU 16/00723). To the Universitat Politècnica de València for the financial support in the project Ayudas a Primeros Proyectos de Investigación (PAID-06-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Towards a Low-Rank Approach to Compress Deep Neural Networks

  • Liern-Garcia, Marina
  • López-García, Aaron
  • Marco-Detchart, Cédric
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
[EN] In this work, we introduce a low-rank approach based on the truncated Singular Value Decomposition (SVD) technique to make deep neural networks (DNNs) smaller. Our method focuses on reducing the overall physical size of a neural network model without losing much in terms of its accuracy or increasing its error noticeably. Specifically, we applied our technique to a modified MobileNetV2 model, in the context of automatic plant diseases detection. We chose two of the biggest layers of the model and compressed them. Our goal was to see how this compression affects the breakdown of the layers, the error in rebuilding the layers, and how well the modified model performs. The results showed that the smaller model still predicts very accurately, even with the reduced physical size of its layers. By making these layers smaller, our approach offers a practical way to handle the deployment of large neural networks, especially in devices with limited resources, without compromising their effectiveness., This work was partially supported with grants TED2021-131295B-C32, PID2021-123673OB-C31 funded by MCIN/AEI/ 10.13039/ 501100011033 and by ERDF A way of making Europe , PROMETEO grant CIPROM/2021/077 from the Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital - Generalitat Valenciana, Early Research Project grant PAID-06-23 by the Vice Rectorate Office for Research from Universitat Politècnica de València (UPV)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Propiedades acústicas de láminas multicapa a partir de residuos de neumático

  • Segura Alcaraz, Jorge Gabriel|||0000-0001-8296-3609
  • Crespo, J.E|||0000-0003-1372-4289
  • Juliá Sanchis, Ernesto|||0000-0003-2940-3906
  • Gadea Borrell, José María|||0000-0003-0740-8781
  • Nadal Gisbert, Antonio Vicente
  • Delgado, A.
[ES] En este trabajo se realiza un estudio de la absorción acústica de paneles multicapa conformados a partir de materiales provenientes de neumáticos reciclados (GTR´s), tratando de dar una repuesta al problema medioambiental generado por estos residuos. El artículo se enmarca como un primer paso para la evaluación de la absorción acústica de estos nuevos paneles multicapa para su aplicación como barreras acústicas, insonorización de maquinaria y equipos industriales, acondicionamiento acústico de recintos, etc. Se han preparado dos tipos básicos de paneles multicapa con 10 y 20 mm de espesor. Cada panel multicapa está constituido por tres capas de diferentes espesores siempre con la disposición fibra-caucho-fibra. Para determinar el coeficiente de absorción se ha utilizado el método del tubo de impedancia acústica. Para el caucho se ha trabajado con granulometrías de entre 0,7 y 2,2-4 mm. Los resultados demuestran que los paneles multicapa con caucho de granulometría 2,2-4 mm presentan una mayor absorción acústica dentro del rango de frecuencia estudiado (400-3500 Hz)., Este trabajo forma parte del Proyecto de Investigación PAID-06-11, dentro del plan de I+D+i financiado por la Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Surrogate Fuel Formulation to Improve the Dual-Mode Dual-Fuel Combustion Operation at Different Operating Conditions

  • Benajes, Jesús|||0000-0002-1653-9188
  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
  • Lago-Sari, Rafael
[EN] Dual-mode dual-fuel combustion is a promising combustion concept to achieve the required emissions and CO2 reductions imposed by the next standards. Nonetheless, the fuel formulation requirements are stricter than for the single-fuel combustion concepts as the combustion concept relies on the reactivity of two different fuels. This work investigates the effect of the low reactivity fuel sensitivity (S=RON-MON) and the octane number at different operating conditions representative of the different combustion regimes found during the dual-mode dual-fuel operation. For this purpose, experimental tests were performed using a PRF 95 with three different sensitivities (S0, S5 and S10) at operating conditions of 25% load/950 rpm, 50%/1800 rpm and 100%/2200 rpm. Moreover, air sweeps varying ±10% around a reference air mass were performed at 25%/1800 rpm and 50%/1800 rpm. Conventional diesel fuel was used as high reactivity fuel in all the cases. Moreover, commercial 95 RON gasoline was used as reference to compare the different TRFs. The engine settings were managed to adjust the rate of heat release to that found with 95 RON gasoline. To do this, a quality index imposing a maximum deviation of 5% point-to-point between the HRR curves from both fuels was defined. The results suggest that PRF 95 with S0 has the most similar behavior compared to conventional 95 RON gasoline whatever the engine load. As the engine load increases, the sensitivity effect is more noticeable and iso-HRR operation was only possible for S0. At low and medium load, the TRFs present similar engine-out emissions with equal fuel consumption. At full load, the NOx emissions are increased with respect to the reference 95 RON gasoline without fuel consumption benefits. The results from the air variation for the different octane numbers demonstrated that the greatest differences are obtained for low air mass (i.e, higher EGR). In addition, the decrease of the octane number limits the maximum air increase due to the pressure gradients, requiring modifications in the engine settings that increase the soot formation., The authors thanks VOLVO Group Trucks Technology and ARAMCO Overseas Company for supporting this research. The authors also acknowledge FEDER and Spanish Ministerio de Economía y Competitividad for partially supporting this research through TRANCO project (TRA2017-87694-R) and the Universitat Politècnica de València for partially supporting this research through Convocatoria de ayudas a Primeros Proyectos de Investigación (PAID-06-18). The author R. Sari acknowledges the financial support from the Spanish ministry of science innovation and universities under the grant ¿Ayudas para contratos predoctorales para la formación de doctores¿ (PRE2018-085043).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Influence of voluntary contractions on the basal sEMG activity of the pelvic floor muscles

  • Albaladejo-Belmonte, Monica
  • Tarazona-Motes, Marta
  • Nohales-Alfonso, Francisco J.
  • Alberola-Rubio, Jose
  • Garcia-Casado, Javier|||0000-0003-1410-2721
[EN] Chronic pelvic pain (CPP) is a complex clinical condition that affects many women, being sometimes misdiagnosed or mistreated,which can be treated with the infiltration of botulinum toxin (BoNTA). The pelvic floor musculature (PFM) condition from CPP patients can be assessed by means of surface electromyography (sEMG). The evaluation of the basal activity can help to detect a muscular dysfunction, therefore it is important to ensure that the PFM shows a minimum activation when its sEMG is being analysed. In this study, we recorded the sEMG of 25 women with CPP before and 8, 12 and 24 weeks after their treatment with BoNTA while they performed a protocol of 5 voluntary contractions. The root mean square (RMS) and sample entropy (SampEn) of basal segments pre- (B[PRE]), inter- (B[I]) and post- (B[POST]) contractions of the sEMG were computed and normalized according to the minimum (RMSnorm) and maximum (SampEnorm) of the recording. B(PRE) showed the lowest RMSnorm median both before and after the treatment with BoNTA, which proved that the activity of the PFM is minimum before the first contraction. As for SampEnnorm, although results were not so conclusive, they also indicated that B(PRE) should be taken as a reference to analyse the PFM function at its state of minimum activity. Future works aiming to characterize the effects of BoNTA in PFM by means of sEMG should consider basal segments before contractions to assess basal tone conditions., This study was funded by ISCIII, MCIU, VLC Campus in Convocatoria Ayudas: UPV-La Fe (INBIO): 2016 SPEHG (ID:C18), 2019 sEMG_BONTAv (ID:C06) and with funds from private contracts with Merz Pharma España S.L.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Load Generators for Automatic Simulation of Urban Fleets

  • Martí, Pasqual|||0000-0001-6406-0641
  • Jordán, Jaume|||0000-0003-0400-9136
  • Palanca Cámara, Javier|||0000-0002-6209-9603
  • Julian, Vicente|||0000-0002-2743-6037
[EN] To ensure cities sustainability, we must deal with, among other challenges, traffic congestion, and its associated carbon emissions. We can approach such a problem from two perspectives: the transition to electric vehicles, which implies the need for charging station infrastructure, and the optimization of traffic flow. However, cities are complex systems, so it is helpful to test changes on them in controlled environments like the ones provided by simulators. In our work, we use SimFleet, an agent-based fleet simulator. Nevertheless, SimFleet does not provide tools for easily setting up big experiments, neither to simulate the realistic movement of its agents inside a city. Aiming to solve that, we enhanced SimFleet introducing two fully configurable generators that automatize the creation of experiments. First, the charging stations generator, which allocates a given amount of charging stations following a certain distribution, enabling to simulate how transports would charge and compare distributions. Second, the load generator, which populates the experiment with a given number of agents of a given type, introducing them dynamically in the simulation, and assigns them a movement that can be either random or based on real city data. The generators proved to be useful for comparing different distributions of charging stations as well as different agent behaviors over the same complex setup., This work was partially supported by MINECO/FEDER RTI2018-095390-B-C31 project of the Spanish government. Pasqual Martí and Jaume Jordán are funded by UPV PAID-06-18 project. Jaume Jordán is also funded by grant APOSTD/2018/010 of Generalitat Valenciana - Fondo Social Europeo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Rammed Earth as an Alternative to Conventional Construction Methods in Valencia: a Comparative Life Cycle Assessment Perspective

  • Quintana-Gallardo, Alberto|||0000-0002-8911-595X
  • Sirera-Cocera, Arturo
  • Zamora-Marina, Eduardo|||0009-0008-8828-4242
  • Sáez, Vanesa
  • Mendiguchia-Fontes, Fernando Aitor
  • Guillén Guillamón, Ignacio Enrique|||0000-0001-5546-1486
[EN] This paper uses a single-family housing model as a case study to evaluate the environmental and thermal performance of rammed earth construction compared to conventional building materials. This study aims to determine which construction method presents a lower environmental impact while maintaining comparable thermal performance. The research begins by defining the physical properties of the earth material used for rammed earth walls through an extensive literature review. Once characterized, construction solutions for the foundation, walls, and roof are proposed. These solutions are validated using thermal transmittance, condensation, and thermal lag analyses, following UNE EN ISO 13786:2000 standards. A single-family housing model is then developed considering local climatic recommendations provided by the Climate Consultant tool. Its thermal performance is assessed by performing a steady-state energy simulation across three distinct climate zones in the Valencian Community: warm and humid (Valencia), cold and dry (Comarca Esport, Utiel-Requena), and warm and dry (Alicante). A comparable model built with conventional materials is also analyzed and adjusted to achieve the same thermal transmittance. The environmental impact is assessed through a Life Cycle Assessment of the A (production) and B (use) phases for both construction methods. This comparative analysis provides insights into the environmental trade-offs between traditional and conventional construction techniques. By quantifying the environmental impacts and thermal performance, this study contributes to the growing discourse on sustainable construction and highlights the potential of rammed earth as an environmentally favorable alternative., The authors gratefully thank the Vicerrectorado de Investigación of the Polytechnic University of Valencia for funding the project “Parametrización de impactos sociales en vivienda: Análisis de Ciclo de Vida Social” (PAID-06-23).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Surveying Safety-relevant AI Characteristics

  • Hernández-Orallo, José|||0000-0001-9746-7632
  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Avin, Shahar
  • Heigeartaigh, Sean O.
[EN] The current analysis in the AI safety literature usually combines a risk or safety issue (e.g., interruptibility) with a particular paradigm for an AI agent (e.g., reinforcement learning). However, there is currently no survey of safety-relevant characteristics of AI systems that may reveal neglected areas of research or suggest to developers what design choices they could make to avoid or minimise certain safety concerns. In this paper, we take a first step towards delivering such a survey, from two angles. The first features AI system characteristics that are already known to be relevant to safety concerns, including internal system characteristics, characteristics relating to the effect of the external environment on the system, and characteristics relating to the effect of the system on the target environment. The second presents a brief survey of a broad range of AI system characteristics that could prove relevant to safety research, including types of interaction, computation, integration, anticipation, supervision, modification, motivation and achievement. This survey enables further work in exploring system characteristics and design choices that affect safety concerns, FMP and JHO were supported by the EU (FEDER) and the Spanish MINECO under grant TIN 2015-69175-C4-1-R, by Generalitat Valenciana (GVA) under grant PROME-TEOII/2015/013 and by the U.S. Air Force Office of Scientific Research under award number FA9550-17-1-0287. FMP was also supported by INCIBE (Ayudas para la excelencia de los equipos de investigacion avanzada en ciberseguridad), the European Commission, JRC¿s Centre for Advanced Studies, HUMAINT project (Expert Contract CT-EX2018D335821-101), and UPV PAID-06-18 Ref. SP20180210. JHO was supported by a Salvador de Madariaga grant (PRX17/00467) from the Spanish MECD for a research stay at the Leverhulme Centre for the Future of Intelligence (CFI), Cambridge, and a BEST grant (BEST/2017/045) from GVA for another research stay also at the CFI. JHO and SOH were supported by the Future of Life Institute (FLI) grant RFP2-152. SOH was also supported by the Leverhulme Trust Research Centre Grant RC2015-067 awarded to the Leverhulme Centre for the Future of Intelligence, and a a grant from Templeton World Charity Foundation
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Use and Conservation of Alabaster in Traditional Aragonese Architecture

  • Baró Zarzo, José Luis|||0000-0001-9529-7289
  • La Spina, Vincenzina
  • Pascual-Rubio, Ana|||0000-0002-0172-4129
[EN] Since ancient times alabaster has been used in architecture for many different purposes: as a load bearing material in the construction of walls and columns, in the manufacture of decorative elements (altarpieces, sarcophagi, capitals...), and as a substitute for glass in the illumination of interiors. In Spain, in areas with abundant natural resources, such as the region of Aragon, it is common to find churches and hermitages with alabaster windows and oculi in clerestories and lanterns. In many instances the alabaster plates in these churches and hermitages are broken, detached or have been replaced with different materials. This material can also be found in traditional architecture close to alabaster quarries, including ones no longer in use, and has been used for ashlar plinths or lintel arches. This paper seeks to provide an introductory characterization of the material, the geographical locationof natural resources in Aragon, and the techniques most frequently used in the construction of historic architecture in rural areas, It also offers basic recommendations for the prevention, repair and maintenance of the main pathologies identified., This research has been funded by the Universitat Politècnica de València (PAID-06-22 project).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Reconstrucción del Espectro De Rayos X con Flat Panel, Cuña de Pmma y el Método Monte Carlo

  • Pozuelo, Fausto
  • Querol Vives, Andrea
  • Juste-Vidal, Belen-Jeanne|||0000-0003-1978-3765
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Ródenas Diago, José|||0000-0003-3283-9188
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[ES] La obtención del espectro primario de rayos X permite determinar la calidad de un haz de fotones producido por un tubo de rayos X, ya que las características dosimétricas de un haz de radiación tienen una relación directa con el espectro primario de rayos X. En este trabajo se estudian las curvas de dosis en profundidad obtenidas dentro del intervalo energético de radiodiagnóstico, entre 40 y 130 keV. La metodología seguida en el trabajo se basa en la reconstrucción del espectro mediante métodos matemáticos a partir de la curva de dosis en profundidad en una cuña de metacrilato y recogida en un flat panel. La reconstrucción del espectro podría suponer una mejora dentro de los controles de calidad de tubos de rayos X al permitir una estimación, más próxima a la real, de la dosis impartida a los pacientes. Existe una estrecha relación entre la curva de dosis en profundidad en el eje central de la cuña de metacrilato y el haz de fotones emitido por el tubo de rayos X. Dicha relación, se basa en la teoría de que la curva de dosis en profundidad puede expresarse como la superposición lineal de las contribuciones de un continuo de haces de fotones monoenergéticos, cada uno ponderado por la fluencia de fotones en cada rango de energía. Los distintos métodos inversos utilizados permiten mejorar la precisión con la que los espectros son obtenidos. Estas técnicas han sido aplicadas a los resultados de dosis obtenidos mediante simulación utilizando los programas basados en el método de Monte Carlo, PENELOPE y MCNP5. Los resultados de las curvas de dosis en profundidad simulados se han comparado con los resultados experimentales estudiando la influencia en la dosis suministrada al paciente debida a los métodos de simulación. Para ello se ha calculado el error cuadrático medio en ambos casos., Este trabajo, ha sido parcialmente financiado por la Generalitat Valenciana dentro del proyecto de investigación GVPRE/2008/136, y la Universitat Politècnica de València dentro del proyecto PAID‐06‐07‐3300. Así como por la beca de Formación de Profesorado Universitario (FPU) del Ministerio de Educación y Ciencia, referencia AP2009‐2600.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Features and limitations in the use of alabaster in architecture

  • Baró Zarzo, José Luis|||0000-0001-9529-7289
  • López Patiño, Mª Gracia|||0000-0002-0136-5613
  • Vercher Sanchis, José|||0000-0001-9855-4201
  • Lerma Elvira, Carlos|||0000-0003-0436-3725
[EN] Alabaster is a noble material that has been used since antiquity for its precious marble-like appearance, its waxy brilliance, its easy workability, and its translucent condition. For this reason, its main application has been in the fields of sculpture and architecture, in the first case, to produce altarpieces, doorways, sarcophagi, etc., and in the second, for protection and lighting purposes, cut into thin sheets, as well as for structural purposes, either in blocks for ashlars or in linear pieces for columns. Currently, the use of alabaster in architecture is limited to the first of these two functions, either for natural lighting or for backlighting with artificial light. The latter use shares an interest with the world of design. On the other hand, despite this excellent performance, we cannot forget their limitations when it comes to achieving good durability. Alabaster is still a variety of gypsum - calcium sulphate dihydrate - and this brings with it the disadvantages of this mineral compound when used as a building material under certain conditions. In addition to the low hardness, fragility, water solubility and calcinability when exposed to sunlight, there is also the maximum size of the pieces and the need for breathability. The aim of this communication is to provide recommendations for its correct application in architectural lighting, in order to optimize the advantages and avoid the disadvantages., This research has been funded by the Universitat Politècnica de València through the research project PAID-06-22. The authors would like to thank the companies Arastone S.A. and Sarreal Art i Llum S.A. for their collaboration in bringing this research to a successful conclusion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo y evaluación de una estación de control de tierra para vehículos aéreos no tripulados

  • Velasco Carrau, Jesús
  • Reynoso Meza, Gilberto
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Sanchís Saez, Javier|||0000-0001-9697-2696
Los vehículos aéreos no tripulados (UAV¿s) son vehículos autónomos, diseñados para cumplir con diversas misiones en el ámbito civil y militar. Actualmente, se comienza a extender su uso en situaciones donde la misión de vuelo conlleva la posibilidad de riesgo de pérdidas humanas. En el siguiente documento, se describe el desarrollo del sistema de telemetría para la gestión de las comunicaciones entre dispositivos UAVs y las estaciones de tierra que monitorizan el comportamiento de estos sistemas.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Does AI Qualify for the Job?: A Bidirectional Model Mapping Labour and AI Intensities

  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Hernández-Orallo, José|||0000-0001-9746-7632
  • Tolan, Songül
  • Pesole, Annarosa
  • Fernández-Macías, Enrique
  • Gómez, Emilia
[EN] In this paper we present a setting for examining the relation between the distribution of research intensity in AI research and the relevance for a range of work tasks (and occupations) in current and simulated scenarios. We perform a mapping between labour and AI using a set of cognitive abilities as an intermediate layer. This setting favours a two-way interpretation to analyse (1) what impact current or simulated AI research activity has or would have on labour-related tasks and occupations, and (2) what areas of AI research activity would be responsible for a desired or undesired effect on specific labour tasks and occupations. Concretely, in our analysis we map 59 generic labour-related tasks from several worker surveys and databases to 14 cognitive abilities from the cognitive science literature, and these to a comprehensive list of 328 AI benchmarks used to evaluate progress in AI techniques. We provide this model and its implementation as a tool for simulations. We also show the effectiveness of our setting with some illustrative examples., This material is based upon work supported by the EU (FEDER), and the Spanish MINECO under grant RTI2018-094403-B-C3, the Generalitat Valenciana PROMETEO/2019/098. F. Martínez-Plumed was also supported by INCIBE (Ayudas para la excelencia de los equipos de investigación avanzada en ciberseguridad), the European Commission (JRC) HUMAINT project (CT-EX2018D335821-101), and UPV (PAID-06-18). J. H-Orallo is also funded by an FLI grant RFP2-152.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

La situación de la academia en la administración del territorio en España e Iberoamérica

  • Femenia-Ribera, Carmen|||0000-0003-3105-9649
  • Mora-Navarro, Gaspar|||0000-0002-2267-2188
  • Marques-Perez, Inmaculada|||0000-0002-1059-6288
[EN] The situation of the academy in land administration in Spain and Iberoamerica: This research aims to show the current collaborative relationship between the organisms implied in land management in Spain, from the academic point of view of knowledge management, and related to geographical information. The main entities are presented: the cadastre (Spanish Directorate General for Cadastre, DGC), the land registry, as rights registry (represented by Spanish Land and Trade Registrars Association, CORPME), the specialist technicians (Spanish Official Corporation of Engineering in Geomatics and Land Surveying, COIGT), and the universities that train those technicians. The legal framework and the principal characteristics of each organism, related to land administration, are presented. Since Spanish law 13/2015, coordination between the cadastre and the land registry is possible. Law 13/2015 has allowed a considerable advance, concerning the graphical demarcation of properties. Knowledge management in land management has been widespread through courses, events, congresses, collaboration protocols, professional certifications and new ad-hoc masters, which have had remarkable growth since 2016. Land management knowledge interchange is also happening between Spain and Latin America, with the support of the Spanish Agency for International Development Cooperation (AECID), DGT and CORPME. Iberoamerica primary international organisms and universities, related to land administration are presented. The principal conclusion is that more academic representation in land administration is needed in Iberoamerica., [ES] La situación de la academia en la administración del territorio en España e Iberoamérica: Se pretende mostrar la relación y colaboración existente actualmente entre los organismos implicados en la administración del territorio en España; desde el punto de vista académico de gestión del conocimiento y relacionado con la información cartográfica Para ello, se presentan los principales entes implicados, como son: el catastro (Dirección General del Catastro, DGC); el registro de la propiedad, como registro de derechos (representado por el Colegio de Registradores de la Propiedad y Mercantiles de España, CORPME); los técnicos especialistas (Colegio Oficial de Ingeniería en Geomática y Topografía, COIGT), y las Universidades que forman a estos técnicos. Se presenta el marco español y las características fundamentales de cada organismo relacionado con la administración del territorio en España. Con mucha mayor implicación en temas cartográficos, desde la implantación de la Ley 13/2015, que permite la coordinación gráfica entre el Catastro y el Registro de la Propiedad. Dicha ley ha permitido un gran avance a nivel nacional respecto a la delimitación gráfica de la propiedad en España. La gestión del conocimiento en estos temas se ha extendido a toda la sociedad a través de jornadas, cursos, eventos, protocolos de colaboración, certificación de personas, promoción de formación de títulos propios,... de muy diversa índole, que han crecido notablemente desde el año 2016. La gestión del conocimiento también se presenta desde España a Latinoamérica con apoyos de la Agencia Española de Cooperación y Desarrollo (AECID) a la DGC y al CORPME. Como breve estudio en iberoamérica, se muestran los principales organismos internacionales relacionados con la administración del territorio, y se enumeran las entidades académicas universitarias presentes desde el ámbito iberoamericano. De ello, se puede extraer la conclusión que hay muy poca representación académica., Financiado con Ayuda a Primeros Proyectos de Investigación (PAID-06-22), Vicerrectorado de Investigación de la Universitat Politècnica de València (UPV). Se cuenta con el apoyo del Colegio Oficial de Ingeniería Geomática y Topográfica (COIGT), y la Escuela Técnica Superior de Ingeniería Geodésica, Cartográfica y Topográfica (ETSIGCT) y el Departamento de Ingeniería Cartográfica, Geodesia y Fotogrametría (DICGF) de la UPV. Se agradece la colaboración de la DGC y el CORPME.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Hydronium Detection in Hardened Concrete

  • Martínez-Ibernón, Ana|||0000-0003-2136-5650
  • Gandía-Romero, Jose M.|||0000-0003-0257-3286
  • Gasch, Isabel|||0000-0001-7036-4481
  • Valcuende Payá, Manuel Octavio|||0000-0002-9967-1554
[EN] The monitoring of reinforced concrete structures allows us to detect the presence of aggressive agents into of the concrete matrix, on site and in a real time. These aggressive agents can produce the unexpected failure of the structures, thus discovering their presence is a fundamental aspect in the preservation of people safety and the durability of the structure. On the other hand, helps to reduce the cost of maintenance and repair operations, due to allow us to identify the problems faster, minimizing the intervention to be done. The present research paper was focused in the hydronium detection; the reduction of this species generates hydrogen, the hydrogen produces the embrittlement and cracking of the steel, which seriously compromises the right behaviour of the structure. The problem of hydrogen appears in industries such as ammonia processing or petrochemistry industries and nuclear power plants. All of them are industries in which a failure seriously compromises the welfare of people and the environment. Therefore, the detection of hydrogen penetration in reinforcement concrete structures in these cases are very interesting. In this study, with the purpose to detect the hydronium or hydrogen in the hardened concrete matrices is proposed the use of voltammetric sensor, which is part of a multisensory system called Electronic-Tongue. This is a preliminary study. The objective of these initial steps was to evaluate the detection capability of the sensor. Currently, have been designing a sequential test in order to evaluate the sensor in different partial hydrogen pressures with the purpose to develop mathematical models to the hydronium or hydrogen detection and quantification in hardened concrete matrix., The authors would like to express their gratitude to the Spanish Ministry of Science and Innovation for the pre-doctoral scholarship granted to Ana Martínez Ibernón (FPU 16/00723). Also, to the Universitat Politècnica de València for the financial support in the project ¿Ayudas a Primeros Proyectos de Investigación (PAID-06-18)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Study of long term fouling on cross flow ultrafiltration

  • Cantó Polo, Rocío Águeda
  • Vincent Vela, Maria Cinta|||0000-0001-8493-0165
  • Cuartas Uribe, Beatriz Elena|||0000-0003-2835-900X
  • Alvarez Blanco, Silvia
  • Lora-García, Jaime|||0000-0003-1699-5404
Ultrafiltration (UF) is a membrane technique whereby water and microsolutes are separated from macromolecules. It has several applications in wastewater treatment and it is also widely used in chemical and food industries. The main disadvantage of UF is membrane fouling, which causes a decline in permeate flux with time. As permeate flux decline highly increases the operation costs, the time-dependence of permeate flux has been studied in many occasions. Most of these studies use protein aqueous solutions (bovine serum albumin, hemoglobin, cheese whey among others) as feed. However, as proteins are charged molecules, they interact with the membrane and their interactions are influenced by the pH of the solution, so the models applied to these kinds of feed solutions should include membrane-solute interaction. When using polythylene glycol (PEG) these interactions may not be considered and the models are simplified., The authors of this work wish to acknowledge the financial support of the Universitat Politècnica de València throught the project "Primeros proyectos de Investigación: Programa de Apoyo a la Investigación y Desarrollo PAID-06-10" and the Spanish Ministry of Science and Innovation throught the project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Approximation to the Environmental Impact of the House of Gongora, Cehegín (Murcia, Spain): an LCA Perspective

  • Quintana-Gallardo, Alberto|||0000-0002-8911-595X
  • Sandoval-Gómez, Francisco
  • Celina-Sáez, Vanesa
  • Zamora-Marina, Eduardo|||0009-0008-8828-4242
  • Secondo Maglia, Juan Gabriel|||0009-0005-0904-4311
  • Mendiguchia-Fontes, Fernando Aitor
  • Guillén Guillamón, Ignacio Enrique|||0000-0001-5546-1486
[EN] This paper deals with an approximation to the environmental impacts of constructing the historic House of Góngora in Cehegín (Murcia), originally built in the 16th century using traditional earth architecture. By analyzing historical construction methods, materials, and energy use, the study approximates the environmental footprint of the house during its original construction. It then compares this with the estimated impacts of building an equivalent structure today, which would imply changes in techniques, methods and regulations. The comparison considers key environmental indicators such as carbon emissions, resource extraction, obtained using the Environmental Footprint LCA methodology. The paper highlights the sustainability inherent in traditional earth architecture and contrasts it with the challenges and benefits of contemporary construction practices. The findings question the idea of sustainability as a contemporary issue and reveal insights into the ecological trade-offs between historical and modern construction methods, emphasizing the potential for re-integrating sustainable practices from the past into modern architecture. This study contributes to ongoing discussions on sustainable construction and the relevance of traditional methods in reducing environmental impact. , Authors AQG, IGG, FAM and FSG gratefully thank the Spanish Ministry of Science, Innovation and Universities for funding the project Earth4Future “Sustainable reuse of earthen architecture and its lessons for contemporary architecture” (PID2022139154OB-I00) under the Proyectos de Generación de Conocimiento 2022 call. Authors AQG and IGG gratefully thank the Vicerrectorado de Investigación of the Polytechnic University of Valencia for funding the project “Parametrización de impactos sociales en vivienda: Análisis de Ciclo de Vida Social” (PAID-06-23).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Theoretical model of a multi-layered polymer coated steel-strip ironing process using a neural network

  • Sellés, M.A.|||0000-0002-0784-5757
  • Sanchez-Caballero, Samuel|||0000-0001-5322-8082
  • Pérez Bernabeu, Elena|||0000-0002-9221-7623
  • Reig-Pérez, Miguel Jorge|||0000-0003-0226-1194
  • Segui Llinares, Vicente Jesús|||0000-0002-4043-2866
  • Schmid, S. R.
An alternative to the traditional can manufacturing process is to use plastic laminated rolled steels as base stocks. This material consist of pre-heated steel coils that are sandwiched between one or two sheets of polymer. The heated sheets are then immediately quenched, which yields a strong bond between the layers. Such polymer-coated steels were investigated by Jaworski [1,2] and Sellés [3], and found to be suitable for ironing with carefully controlled conditions. A novel multi-layer polymer coated steel has been developed for container applications. This material presents an interesting extension to previous research on polymer laminated steel in ironing, and offers several advantages over the previous material (Sellés [3]). This document shows a modelization for the ironing process (the most crucial step in can manufacturing) done by using a neural network. © (2012) Trans Tech Publications., This work was supported by the “Universitat Politècnica de València” [grant number PAID-06-10-003-305]
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Multi-touch-based assessment of hand mobility, dexterity and function. Preliminary study of validity, reliability and sensitivity to upper limb impairment severity in individuals with stroke.

  • Latorre, Jorge
  • Mollà-Casanova, Sara
  • Salinas, Bárbara
  • Colomer, Carolina
  • Borrego, Adrián|||0000-0001-5134-7811
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Llorens Rodríguez, Roberto|||0000-0002-8677-8707
[EN] Impairments of the upper limb function are among the most common and disabling sequelae after stroke, and their rehabilitation poses a major challenge for current physical and occupational therapy interventions. While restoration of certain degree of proximal and global movements and function is expected, the recovery of premorbid hand mobility and dexterity is less likely to occur. Although great efforts are usually made to rehabilitate these skills, with customized particular and analytic exercises, their assessment is rarely made with the same level of specificity. In general, hand and finger mobility and functionality are indirectly assessed in the clinic with standardized clinical scales and tests that require the use of these skills to perform some tasks. Although these scales are easy to administer, they can present poor accuracy, be biased, and do not allow for isolated assessment of joints and movements. Multi-touch technology enables interaction with electronic devices, such as smartphones and tablets, with on-screen finger touches. Although there is a very limited number of studies that investigate the potential of this technology to rehabilitate hand mobility and dexterity, the use of this technology for assessment of these skills remains unexplored. This study evaluates the feasibility of a multi-touch-based assessment tool (app) of hand mobility and dexterity in a sample of post-stroke survivors. Our results provide preliminary evidence that this technology can be used to design valid and reliable instruments for assessing hand mobility and dexterity that, in addition, are sensitive to the severity of the motor impairment of the upper limb after stroke, which could complement conventional clinical assessment., This study was partially funded by project VALORA, Fundació la Marató de la TV3 (grant 201701-10), grant BES-2014-068218 of the Ministerio de Economía y Competitividad of Spain, and grant Ayuda a Primeros Proyectos de Investigación (PAID-06-18), Vicerrectorado de Investigación, Innovación y Transferencia de la Universitat Politècnica de València, València, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Parametrizing social performance of new and existing housing projects through Social Life Cycle Assessment

  • Quintana-Gallardo, Alberto|||0000-0002-8911-595X
[EN] In the construction industry, decisions made at the architectural design level significantly impact the life of the building's users and the surrounding society. Aspects such as the effect of the building envelope on the thermal comfort of the users, the indoor air quality, the distribution of spaces, and the choice of materials and finishes are often studied without considering the effect these decisions have on the users throughout the life of the building. These aspects are often studied theoretically and relegated to a secondary role because of the difficulty of considering them holistically and objectively. This study's objective is to create a methodology that allows us to know how decisions at the project level affect the users prior to its construction. This is achieved by adapting the Social Life Cycle Assessment (S-LCA) methodology. S-LCA is a methodology used to objectively measure human actions' effects on society and the environment. The methodology is based on developing and defining a series of indicators that allow the adaptation of the Social Life Cycle Assessment (S-LCA) methodology to the architecture and construction sector. The methodology builds on the United Nations Environmental Programme guidelines and the Level(s) Framework. The indicators are chosen to analyze the vulnerability, well-being, habitability, and comfort associated with housing. The result is a series of social indicators that will be subsequently implemented in developing a holistic methodology of Social Life Cycle Assessment in the field of architecture., The authors gratefully thank the Vicerrectorado de Investigación of the Polytechnic University of Valencia for funding the project “Parametrización de impactos sociales en vivienda: Análisis de Ciclo de Vida Social” (PAID06-23). Author AQG gratefully acknowledges receiving funding from the Spanish Ministry of Universities and the Polytechnic University of Valencia, under the “Plan de Recuperación Transformación y Resiliencia” (investment funding from the European Union Next Generation EU), according to Royal Decree 289/2021, of April 20 (BOE of 22 April 2021).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Análisis de incertidumbres en la Simulación de Rayos X utilizando MCNP5

  • Querol Vives, Andrea
  • Gallardo Bermell, Sergio|||0000-0002-3703-9983
  • Ródenas Diago, José|||0000-0003-3283-9188
  • Verdú Martín, Gumersindo Jesús|||0000-0001-5098-080X
[ES] La caracterización del espectro primario de rayos X supone una herramienta muy útil para el Control de Calidad (QC) de los equipos de radiodiagnóstico, ya que permite una mejor estimación de la dosis recibida por el paciente, así como una mejor calidad de imagen. En este trabajo, se ha desarrollado un modelo de Monte Carlo, con el programa MCNP5, para simular espectros de rayos X a partir de una fuente de electrones y las características de un tubo de rayos X comercial. Los espectros obtenidos se han comparado con los espectros extraídos del catálogo IPEM 78 para validar el modelo de simulación de MCNP5. Además, se ha estudiado la incertidumbre asociada a los parámetros geométricos del modelo del tubo de rayos X y sus efectos en los espectros simulados utilizando la fórmula de Noether‐Wilks. Los parámetros del tubo que se han estudiado son el espesor de los colimadores, los filtros, el blindaje y el obturador de barrilete. A la vista de los resultados, se puede concluir que para los cálculos de MCNP5 la incertidumbre debida a los parámetros geométricos es más relevante que la estadística asociada al propio método., Este trabajo, ha sido parcialmente financiado por la Generalitat Valenciana dentro del proyecto de investigación GV PRE/2008/136, y la Universitat Politècnica de València dentro del proyecto PAID‐06‐07‐3300. Así como por la beca de Formación de Profesorado Universitario (FPU) del Ministerio de Educación y Ciencia, referencia AP2009‐2600.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

New matrix series expansions for the matrix cosine approximation

  • Defez Candel, Emilio|||0000-0002-3303-6371
  • Ibáñez González, Jacinto Javier|||0000-0002-6912-4453
  • Alonso Abalos, José Miguel|||0000-0001-6812-7364
  • Peinado Pinilla, Jesús|||0000-0002-9048-5106
  • Alonso-Jordá, Pedro|||0000-0002-6882-6592
This work has been partially supported by Spanish Ministerio de Economia y Competitividad and European Regional Development Fund (ERDF) grants TIN2017-89314-P and by the Programa de Apoyo a la Investigacion y Desarrollo 2018 of the Universitat Politecnica de Valencia (PAID-06-18) grants SP20180016.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Computer Assisted Transcription of Handwritten Text Images

  • Toselli, Alejandro Héctor
  • Vidal, Enrique|||0000-0003-4579-5196
  • Romero, Verónica
[EN] To date, automatic handwriting recognition systems are far from being perfect and often they need a post editing where a human intervention is required to check and correct the results of such systems. We propose to have a new interactive, on-line framework which, rather than full automation, aims at assisting the human in the proper recognition- transcription process; that is, facilitate and speed up their transcription task of handwritten texts. This framework combines the efficiency of automatic handwriting recognition systems with the accuracy of the human transcriptor. The best result is a cost-effective perfect transcription of the handwriting text images., This work has been supported by the EC (FEDER), the Spanish MEC under grant TIN2006-15694-C02-01, and by the Conseller¿ıa d Empresa, Universitat i Ciencia - Generalitat Valenciana ` under contract GV06/252.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Modelling xylem temperature in olive and almond trees to estimate Xylella fastidiosa infection in woody hosts

  • Navas Cortés, Juan Antonio
  • Román Ecija, Miguel
  • Landa, Blanca B.
  • Testi, Luca
Trabajo presentado en la 2nd European conference on Xylella fastidiosa (how research can support solutions), celebrada en Ajaccio el 29 y 30 de octubre de 2019.-- Conferencia invitada, Xylella fastidiosa(Xf) can infect a wide range of woody crops that are grown extensively worldwide. The temperature patterns inside the woody plant parts which are the habitat of Xf cells may nevertheless be different to those of the standardly recorded air temperature, due to the wood thermal inertia, wind speed or incident radiation energy andits shading by the canopy. To investigate the relationship between the temperatures that can be reached in different partsof the xylematic system and those of the surrounding air,an experiment was conducted in Córdoba, southern Spain, from 2017 to 2019.In a high-density plot, a set of four mature olive trees (two with maximum exposure to sunlight on the southern border and two in the middle of the plot) were instrumented with a multiplexed set of specially-made thermocouples placed in different parts ofthe active xylem tissues. Measurements were made uninterruptedly from winter 2017 to spring 2019 at 10-min. intervals: inside small branches (1cm diameter), inside the trunk at 2 and 4cm depths,and in the soil underneath the trees at 20cm depth. This set was replicated on the southern (sunlit) and northern side of each tree; insitustandard measurement of air temperature at 1.5m height was also recorded. The experiment was replicated in a nearby almond tree plot. Solar radiation, air temperature and wind speed were measured concurrently in a nearby meteorological station. Our results indicate that winter standard air temperature minimums closely match those of all the above-ground xylematic systems, while maximums may differ substantially (>20°C),especially in the deeper xylem rings. For these parts and the root xylem, a model ofheat transfer which includes the shading effect may be necessary. These results would allow a better parametrisation of epidemiological models used to estimate the development of Xf infection in woody hosts., This work has received funding from 727987 XF-ACTORS (EU-H2020), E-RTA2017-00004-C06-02 from AEI-INIA Spain and FEDER, and the Spanish Olive Oil Interprofessional., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Phenotypic characterization of two Spanish strains of Xylella fastidiosa subsp. multiplex ST6 differing in plasmid content

  • Román Ecija, Miguel
  • Landa, Blanca B.
  • Navas Cortés, Juan Antonio
  • Gómez, Laura
  • Fuente, L. de la
Trabajo presentado en la 2nd European conference on Xylella fastidiosa (how research can support solutions), celebrada en Ajaccio el 29 y 30 de octubre de 2019., Two Xylella fastidiosa(Xf) subsp. multiplexstrains IVIA5901 and ESVL were isolated from symptomatic almond trees in Alicante (Spain). Even if these Xf strains show an average nucleotide identity at the chromosomal level of 99.99%, they differ by the presence of two plasmids pXF64-Hb_ESVL and pUCLA-ESVL, only found in strain ESVL. Xf colonisation and disease development in host plants have been shown to be related to the size of cell aggregates, bacterial motility and biofilm formation, which are mediated by type I and type IV pili, among other traits.The goal of this study was to characterise the phenotypic characteristics of these strains that may be related to their differences in plasmid content.The Spanish Xf subsp. multiplexstrains were compared with Xf subsp. multiplexstrains Alma-Em3 and BB08-1 isolated from blueberry and the reference strain Xf subsp. fastidiosaTemecula1 from grapes, all isolated in the US. To study bacterial behaviour and phenotypic characteristics, several experiments were performed to determine adhesion force to substrate, biofilm formation, movement, cell–cell aggregation, twitching motility and patterns of bacterial growth. Additionally, a virulence assays were conducted in the greenhouse using tobacco plants cvs. SR1 and Xanthi. We also determined the presence of genes coding for type I and type IV pili in the Spanish strains. Our results show that the two Spanish isolates of Xf subsp. multiplexhave lower motility, less capacity of aggregation, make less biofilm, and cause lower disease severity when compared with the US isolates used in this study. Also, there were significant differences in disease severity between Xf Spanish strains that varied according to the tobacco cultivar, with Xanthi being the most susceptible one. Besides, our resultsindicate that strain ESVL exhibits stronger attachment to substrate than IVIA5901, but no differences in biofilm formation, cell–cell aggregation or twitching motility were found between them. The role of plasmids in the biology of these Spanish Xf strains will be further investigated., Study supported by Project 727987 XF-ACTORS (EU-H2020), COST Action CA16107 EuroXanth and E-RTA2017-00004-C06-02 from AEI-INIA Spain and FEDER., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Temperature determines growth and biofilm formation of Xylella fastidiosastrains in vitro

  • Román Ecija, Miguel
  • Landa, Blanca B.
  • Olivares-García, Concepción
  • Jiménez-Díaz, Rafael M.
  • Navas Cortés, Juan Antonio
Trabajo presentado en la 2nd European conference on Xylella fastidiosa (how research can support solutions), celebrada en Ajaccio el 29 y 30 de octubre de 2019., Xylella fastidiosa (Xf) is classified as a mesophilic bacterium particularly well adapted to areas with mild winters. The effects of temperature on Xf development have been addressed only for Xf subsp. fastidiosa strains. In this work, we have explored the effects of temperature on growth and biofilm formation in vitro for Xf strains representative of Xf subspecies prevalent in the European outbreaks. Growth, biofilm formation and cell viability of Xf strains from subsp. fastidiosa (7 strains), multiplex (18 strains), pauca (3 strains) and sandyi (2 strains) of different geographic and host origin have been determined in microplates with PD3 medium incubated at a constant temperature range of 6–32 °C at 4 °C intervals. Growth was determined daily by optical density at 600 nm, and biofilm was assessed at the end of the experiments by a crystal violet assay. Both parameters were modelled using a beta function to estimate the cardinal and optimal temperature values for each strain. Our results indicate that both growth and biofilm formation is determined by temperature and Xf strain. Overall, minimum vales for both parameters were observed at the extreme temperatures of 6 and 32 °C. However, the range with optimal values largely depends on the Xf strain. Although no distinct range was associated with subspecies, the widest temperature range for optimal growth was estimated for Xf subsp. multiplex strains at 20–32 °C. Optimal growth was estimated at 24–32 °C for Xf subsp. fastidiosa strains. No clear pattern was found for Xf subsp. pauca, with optimal values between 16 and 24 °C or 20 and 28 °C, depending on the strains. Similarly, for Xf subsp. sandyi, optimal growth occurred at 16–28 °C or 20–28 °C. With a few exceptions, similar response to temperature was observed for biofilm formation.These results would allow the development of region-specific epidemiological models to predict the risk associated with the establishment and spread of Xf strains in Europe., This work has received funding from 727987 XF-ACTORS (EU-H2020), E-RTA2017-00004-C06-02 from AEI-INIA Spain and FEDER, and the Spanish Olive Oil Interprofessional., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Understanding the potential origin and epidemiological consequences of the Spanish outbreaks caused byXylella fastidiosasubspecies multiplex

  • Landa, Blanca B.
  • Castillo, Almudena
  • Giampetruzzi, Annalisa
  • Román Ecija, Miguel
  • Velasco-Amo, María Pilar
  • Marco-Noales, E.
  • Moralejo, Eduardo
  • Saponari, Maria
  • Navas Cortés, Juan Antonio
  • Almeida, Rodrigo P. P.
Trabajo presentado en la 2nd European conference on Xylella fastidiosa (how research can support solutions), celebrada en Ajaccio el 29 y 30 de octubre de 2019., Outbreaks in Europe associated with Xylella fastidiosa(Xf) subspecies multiplex are the most frequent, accounting for the larger number of susceptible plant species (more than 70%), with some host overlap among the different regions. Diverse Sequence Types (ST) have been detected across distinct geographical regions: ST6, ST7 and ST79 in Corsica and PACA region (France), ST7 and ST81 in the Balearic Islands (Spain), ST6 in the province of Alicante and Madrid (mainland Spain), ST7 in the Douro Littoral region (Portugal), and ST87 in the region of Tuscany (northern Italy). In recent years, genetic analysis and pathogenicity tests have provided evidence of biological, ecological and host range diversity among strains of the same subspecies and STs. Draft genomes of 12 Spanish isolates of Xf subsp. multiplex (ST6and ST81) were used for comparative genomic studies with currently available genomes of the same subspecies from France and Italy. Phylogenetic analysis based on core genomes, accessory genomes and single nucleotide polymorphisms indicate that: (i) European outbreaks associated with strains of Xf subsp. multiplex most likely result from distinct independent introductions; (ii) ST6-strains recovered from Spain and France, although sharing the same ST, fell in distinct phylogenetic subgroups; (iii) ST81 strains from the Balearic Islands and ST6 strains from Alicante differentiated in distinct phylogenetic groups (i.e. ST81 isolates are closer to ST6 isolates from California and France than ST6 isolates from Alicante, which in turn are closer to ST7 isolates from the USA and France); (iv) a low number of SNPsare detected among the strains recovered in Alicante, suggesting a recent introduction in the area. Additionally, whereas some recombination events were found among ST81 isolates from Mallorca and ST6 isolates from France with isolates of Xf subsp. fastidiosa ST1 from Mallorca, no evidence of recombination among ST6 isolates from Alicante with other European Xf isolates was found. Pathogenicity tests on the three main Spanish olive cultivars are being conducted with isolates belonging to ST6 and ST81 and compared to Xf subsp. paucaST53 from Italy and ST80 from Ibiza. This work highlights that although the use of MLST approach is a powerful tool for resolving genetic relationships among isolates, the exploration of the whole genomes brings to more comprehensive information that in the future may help to retrieve more robust correlations with the biology and host range of the sequenced isolates. Furthermore, since current European regulation of Xf is based on the subspecies present in each outbreak, these results combined with further pathogenicity tests on main crops may help to establish management and regulation policy standards for the affected areas in Europe., This work has received funding from projects 727987 XF-ACTORS (EU-H2020), E-RTA2017-00004-C06-02 from AEI-INIA Spain and FEDER, and the Spanish Olive Oil Interprofessional., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Genomic insights into the diversity of European Xylella fastidiosaisolates

  • Imperial, Juan
  • Velasco-Amo, María Pilar
  • Landa, Blanca B.
Trabajo presentado en la 2nd European conference on Xylella fastidiosa (how research can support solutions), celebrada en Ajaccio el 29 y 30 de octubre de 2019., A growing number of recent and current studies on Xylella fastidiosa outbreaks in Europe emphasise genomic sequencing of bacterial isolates as a mean to infer their potential origin, biology, recombination events and possible determinants of host specificity. In the present work we have undertaken a re-assessment of publicly available X. fastidiosa genomic sequences from a comparative standpoint. With limitations due to the fact that most of the available sequences were left at the draft stage, and that only a few are complete, we undertook to compare: i) genomic organisation (synteny); ii) number, origin and genomic position of insertion elements (IS, islands, phage-related elements, plasmids); iii) individual gene complements within the species and subspecies pan-genomes; and iv) exclusive or enriched genes associated with subspecies or host of isolation. Our preliminary results suggest that X. fastidiosa genomes show a great plasticity in their organisation, possibly aided by the widespread presence of insertion elements, and that the traditional subspecies classification, although useful from an operational standpoint, is probably insufficient to explain the observed genomic variability., Supported by Project E-RTA2017-00004-C06-02 FEDER INIA-AEI Ministerio de Ciencia, Innovación y Universidades from Spain, and the Spanish Olive Oil Interprofessional.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Improving Xylella sampling in Mallorca

  • Perelló, S. M.
  • Nieto, Alicia
  • Borrás, David
  • Adrover, Francesc
  • Gost, Pere A.
  • Montesinos, Marina
  • Moralejo, Eduardo
  • Landa, Blanca B.
  • Beidas, Omar
  • Juan, Andreu
  • Olmo, Diego
Trabajo presentado en la 2nd European conference on Xylella fastidiosa (how research can support solutions), celebrada en Ajaccio el 29 y 30 de octubre de 2019., Xylella fastidiosawas detected in Majorca in late 2016 (Olmo et al. 2017). Since then, accomplishing EU regulatory, a huge number of samples have been analysed. Poster sessions71| P a g eParticularly, the Mallorca outbreak is different to others in Europe, because of the coexistence of subspecies multiplex(ST81, ST7) in almond trees, olive trees and other species, and subspecies fastidiosa(ST1) in almond trees and grapevine plants among others.As alreadyknown, detection tests of X. fastidiosaare conditioned by the sampling date. However, it is not well known if the optimal dates for sampling are the same for all host species, if it is viable to pool several samples, or if the bacterium can be detected in old wood samples.In this study, we have focused the X. fastidiosamonitoring on almond, grapevines and olive trees. Monthly percentages of positives and average Ct value of more than 2,000 analyses of each of these crops were compared. Overall, we observed that for almond trees the best results were obtained from samples collected from June to August, whereas in grapevine the optimum period was from August to October. In olive trees early spring resulted in the most favourable time for detection, with an increase in Ct and decrease of positive cases in summer.In the assays conducted with pooled almond leaf samples, mixing one infected plant extract with the same volume of up to four negative extracts, showed an average Ct increase of 2.7 cycles, whereas for olive and grapevine samples the Ct increase was > 4 cycles.By default, X. fastidiosais normally analysed in leaf midribs and petioles. We also tested the potential use of wood samples from trunks,sampling different tree rings. Although this sampling procedure is not recommended for routine surveys, it allowed us to establish a potential infection chronology of the number of years since the first infection might have occuredin the Balearic Islands., Study supported by Project E-RTA2017-00004-C06-02 from AEI-INIA Spain and FEDER and the Spanish Olive Oil Interprofessional.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Phenotypic characterisation of two Spanish strains of Xylella fastidiosa subsp. multiplex ST6 differing in plasmid content

  • Román Ecija, Miguel
  • Landa, Blanca B.
  • Navas Cortés, Juan Antonio
  • Gómez, Laura
  • Fuente, L. de la
Trabajo presentado en la 2nd European conference on Xylella fastidiosa (how research can support solutions), celebrada en Ajaccio el 29 y 30 de octubre de 2019., Two Xylella fastidiosa(Xf) subsp. multiplexstrains IVIA5901 and ESVL were isolated from symptomatic almond trees in Alicante (Spain). Even if these Xf strains show an average nucleotide identity at the chromosomal level of 99.99%, they differ by the presence of two plasmids pXF64-Hb_ESVL and pUCLA-ESVL, only found in strain ESVL. Xf colonisation and disease development in host plants have been shown to be related to the size of cell aggregates, bacterial motility and biofilm formation, which are mediated by type I and type IV pili, among other traits.The goal of this study was to characterise the phenotypic characteristics of these strains that may be related to their differences in plasmid content.The Spanish Xf subsp. multiplexstrains were compared with Xf subsp. multiplexstrains Alma-Em3 and BB08-1 isolated from blueberry and the reference strain Xf subsp. fastidiosaTemecula1 from grapes, all isolated in the US. To study bacterial behaviour and phenotypic characteristics, several experiments were performed to determine adhesion force to substrate, biofilm formation, movement, cell–cell aggregation, twitching motility and patterns of bacterial growth. Additionally, a virulence assays were conducted in the greenhouse using tobacco plants cvs. SR1 and Xanthi. We also determined the presence of genes coding for type I and type IV pili in the Spanish strains. Our results show that the two Spanish isolates of Xf subsp. multiplexhave lower motility, less capacity of aggregation, make less biofilm, and cause lower disease severity when compared with the US isolates used in this study. Also, there were significant differences in disease severity between Xf Spanish strains that varied according to the tobacco cultivar, with Xanthi being the most susceptible one. Besides, our resultsindicate that strain ESVL exhibits stronger attachment to substrate than IVIA5901, but no differences in biofilm formation, cell–cell aggregation or twitching motility were found between them. The role of plasmids in the biology of these Spanish Xf strains will be further investigated., Study supported by Project 727987 XF-ACTORS (EU-H2020), COST Action CA16107 EuroXanth and E-RTA2017-00004-C06-02 from AEI-INIA Spain and FEDER.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Rethinking the Xylella fastidiosa scenario in the Balearic Islands: what epidemiological, phylogenetic and dendrochronological data tell us

  • Moralejo, Eduardo
  • Olmo, Diego
  • Gomila, Margarita
  • Nieto, Alicia
  • Montesinos, Marina
  • Borrás, David
  • Landa, Blanca B.
Trabajo presentado en la 2nd European conference on Xylella fastidiosa (how research can support solutions), celebrada en Ajaccio el 29 y 30 de octubre de 2019., The emergence of Xylella fastidiosa(Xf) in Europe has been dealt as relatively recent introductions from the American continent. While this seems accurate for highly virulent genotypes such as thestrain currently causing the quick olive decline syndrome in Apulia since ca. 2013, less virulent Xf genotypes might have gone undetected for a long time, being confused with drought or fungal disease symptoms under Mediterranean climatic conditions. Indeed, the current widespread incidence and severity of the Pierce’s disease (PD) and Almond Leaf Scorch Disease (ALSD) in Mallorca Island can only be understood in this context of a 20-year introduction scenario. Our current epidemiological, phylogenetic anddendrochronological data onXf strains belonging to subsp. fastidiosaST1, and Xf subsp. multiplexST81, causing Pierce’s disease (PD) and ALSD, respectively, strongly suggest that they were overlooked for decades. Both subspecies were very likely transported from California to Mallorca with infected almond scions around 1995 and subsequently spread throughout the island by the local vector Philaenus spumarius. Our phylogenetic analysis based on WGS of isolates of both subspecies from Mallorca supports their Californian origin. Congruent with this, Xf DNA was consistently detected in the growing rings of infected almond trees from 2006 to the present and occasionally as far back as 1998. In the main focus in Son Carrió more than 50% of the almond trees diedand 90% of trees showed symptoms compatible with ALSD in 2012, but the aetiology of this problem was attributed to fungal trunk diseases, drought or field abandonment. We hypothesise that during the last 20 years, Xf subsp. multiplexST81 isolates have adapted to wild olive trees, widespread on the island, causing a mild dieback, and later on reaching the island of Menorca very likely on infected P. spumariustransported as a hitchhiker on ships moving between the islands., This research was funded by project E-RTA2017-00004-C06 from AEI-INIA Spain and FEDER and received financial support from the Ministry of Agriculture, Fishery and Food (Dirección General de la Sanidad de la Producción Agrària) of Spain and from ‘Govern de les Illes Balears’.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Proyecto "Desarrollo de estrategias de erradicación, contención y control de Xylella fastidiosa en España" (E-RTA2017-00004-C06-00) y Proyecto específico en olivo (OIAOE)

  • Landa, Blanca B.
Trabajo presentado en el XLIX Foro INIA de Colaboración Público-Privada (“Prevención y control de Xylella fastidiosaen Españaen el contexto de cambio climático”), celebrado en Madrid el 12 de diciembre de 2019.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Efecto de la relación atómica Cu:Pt en catalizadores para la reducción electroquímica de CO2

  • Gutiérrez Roa, Manuel
  • Pérez Rodríguez, Sara
  • Lascorz, L.
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
Comunicación oral presentada en la 9ª Jornada de Jóvenes Investigadores (Química y Física) de Aragón, celebrada en Zaragoza el 16 de diciembre de 2021, y organizada por la Sección Territorial de Aragón de la Real Sociedad Española de Química y la Real Sociedad Española de Física., En los últimos años, la reducción de CO2 por vía electroquímica ha emergido como una estrategia para la obtención de compuestos de alto valor añadido (alcoholes o hidrocarburos) con aplicaciones energéticas o como moléculas plataforma para la síntesis de otros productos químicos. Si bien el CO2 es una fuente de carbono abundante, la alta estabilidad de este compuesto dificulta su conversión en otros productos, ya que implica un aporte de energía significativo. Además, la reacción de electro-reducción de CO2 (CO2RR) tiene lugar a partir de un mecanismo de reacción complejo con diferentes rutas paralelas y con múltiples etapas de transferencia de electrones. En este contexto, la utilización de catalizadores activos y selectivos que aumenten la eficiencia de la reacción y modulen la formación del producto deseado resulta primordial. Los sistemas catalíticos basados en cobre han atraído mucha atención por su tendencia única a producir hidrocarburos y alcoholes, aunque requieren de altos sobrepotenciales para activar la molécula de CO2. Una solución prometedora es el uso de catalizadores bimetálicos entre este elemento y un metal noble (Pt), de forma que el Cu regule la selectividad y el Pt reduzca el sobrepotencial. En este trabajo se estudia el efecto del ratio atómico Cu:Pt en el comportamiento electroquímico para la CO2RR de catalizadores bimetálicos soportados sobre negro de carbono (CuPt/C, 20 % de cobre en peso). La síntesis consistió en la preparación de nanopartículas de Cu/C por impregnación y reducción con NaBH4. Posteriormente, el Pt se incorporó mediante desplazamiento galvánico, generando partículas bimetálicas CuPt/C [1]. Los electrocatalizadores CuPt/C fueron analizados mediante diversas técnicas (XRD, ICP, TEM), confirmando cargas metálicas similares a las nominales, así como la correcta deposición de las nanopartículas en la superficie del material carbonoso. Por otro lado, la actividad de los catalizadores hacia la CO2RR se evaluó por voltamperometría cíclica y cronoamperometría en una celda electroquímica de tres electrodos usando una disolución acuosa de KHCO3 0,1 M como electrolito [2]. Los experimentos demostraron la adecuada actividad para la reducción de CO2 de todos los catalizadores sintetizados. Además, mediante la realización de estudios de adsorción y oxidación de CO y CO2 reducido a diferentes potenciales, se analizó la naturaleza de las especies que intervienen en la CO2RR. A mayor presencia de Pt, los catalizadores presentaron una mayor actividad para la evolución de hidrógeno y para la adsorción de especies derivadas de la reducción de CO2 (CO), mientras que la formación de formiato a partir de la CO2RR fue más favorable en fracciones atómicas Cu:Pt de 95:5 y 95:10., Los autores desean agradecer al Ministerio de Ciencia e Innovación la financiación recibida con el proyecto de referencia PID2020-115848RB-C21 y al Gobierno de Aragón por la financiación al grupo T06-20R. S. Pérez-Rodríguez agradece además al MCIN/AEI /10.13039/501100011033 por la concesión de su contrato Juan de la Cierva-Incorporación (IJC2019-041874-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Catalizadores basados en materiales no críticos para pilas de combustible

  • Álvarez Manuel, Laura
  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
1 Figura, 1 Tabla.-- Resumen del póster presentado en la 9ª Jornada de Jóvenes Investigadores de Química y Física de Aragón, celebrada el 16 de diciembre de 2021, en Zaragoza., Uno de los mayores retos en la tecnología de pilas de combustible es la disminución del coste de los sistemas catalíticos mediante la sustitución de los catalizadores basados en Pt, un metal considerado crítico, por otros basados en metales de transición abundantes y económicos. Los catalizadores de Fe coordinados con nitrógeno y carbono (Fe-N-C) son los más activos para la reacción de reducción de oxígeno (ORR), la reacción limitante en las pilas de combustible [1]. En este trabajo se propone el uso de xerogeles de carbono dopados con nitrógeno como matriz carbonosa de catalizadores Fe-N-C con el objetivo de analizar el efecto del dopado con nitrógeno en la actividad de los catalizadores. Los N-CXG se han sintetizado por vía sol-gel a partir de resorcinol (R), formaldehído y urea (U), variando la relación U/R. Posteriormente, el Fe se ha introducido mediante síntesis mecánica con un molino de bolas planetario, seguido de un tratamiento a alta temperatura en atmósfera inerte [2]. Los catalizadores obtenidos, denominados como Fe-N-CXG-X (X = Ratio U/R) se han caracterizado mediante espectroscopía foto-electrónica de rayos X (XPS) y análisis elemental. La actividad hacia la ORR de los catalizadores obtenidos se ha determinado en una celda de tres electrodos con electrodo de disco rotatorio (RDE) en medio ácido. El presente estudio demuestra que la cantidad de nitrógeno del xerogel (ratio U/R) y el tipo de nitrógeno introducido, determina la actividad del catalizador hacia la ORR, puesto que condiciona la cantidad de sitios activos formados, siendo el catalizador Fe-N-CXG-1 -con mayor % de N y mayor % de este en forma de Npiridínico y grafítico-, el más activo., Los autores desean agradecer al Ministerio de Ciencia e Innovación la financiación recibida con el proyecto de referencia PID2020-115848RB-C21 y al Gobierno de Aragón por la financiación al grupo T06-20R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Catalizadores bifuncionales como electrodos positivos de baterías hierro-aire

  • Villanueva, Nicolás
  • Alegre Gresa, Cinthia
  • Martínez Visus, Íñigo
  • Lázaro Elorri, María Jesús
1 figura.-- Resumen del póster presentado en la 9ªJornada de Jóvenes Investigadores de Química y Física de Aragón, celebrada en Zaragoza el 16 de diciembre de 2021., Las baterías hierro-aire son sistemas prometedores para el almacenamiento de energía. Entre sus ventajas destaca su bajo impacto ambiental y coste, la alta disponibilidad de sus materias primas y su elevada energía específica teórica, 765 Wh/kgFe [1]. En el electrodo positivo de estas baterías se realiza, durante la carga, la reacción de evolución de oxígeno (OER) y, durante la descarga, la reacción de reducción de oxígeno (ORR). Estas reacciones son lentas, por lo que requieren de un catalizador que sea capaz de llevar a cabo ambas reacciones (bifuncional). En este trabajo se estudian composites de nanofilamentos de dióxido de manganeso dopados con hierro (Fe- MONW) y nanofibras de carbono (CNF) como catalizadores bifuncionales. Los MONW se obtuvieron por un método hidrotermal y las CNF mediante descomposición catalítica de metano; posteriormente se mezclaron mecánicamente en un molino de bolas (Fe-MONW/CNF). La actividad electroquímica de los catalizadores se evaluó en una celda de tres electrodos con un electrodo de disco rotatorio (RDE). Los nanofilamentos son de fase cristalina α-MnO2, que ha mostrado ser la más activa para la ORR y la OER, y tienen un área cercana a los 25 m /g, con diámetros que se aproximan a los 100 nm. Las nanofibras tienen estructura fishbone, con diámetros de aproximadamente 60-90 nm y áreas superficiales de 90 m /g. Los composites mostraron mayor actividad catalítica tanto para la ORR como para para la OER que las nanofibras y que los nanofilamentos por separado (Figura 1), así como mayor actividad que el catalizador comercial para la OER (IrO2)., Los autores agradecen la financiación del proyecto PID2020-115848RB-C21 del Ministerio de Ciencia e Innovación y al Grupo DGA T06-20R. N. Villanueva agradece al Gobierno de Aragón su contrato pre- doctoral. ________________
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Fieltros modificados con grafeno y nitrógeno como electrodos en baterías de flujo redox

  • Molina Serrano, Antonio J.
  • Luque-Centeno, José Manuel
  • Alegre Gresa, Cinthia
  • Sebastián del Río, David
  • Carrasco Marín, Francisco
  • Lázaro Elorri, María Jesús
1 figura.-- Resumen del póster presentado en la 9ª Jornada de Jóvenes Investigadores de Química y Física de Aragón, celebrada en Zaragoza, el 16 de diciembre de 2021., Las baterías de flujo redox (BFR) son una de las tecnologías más prometedoras para el almacenamiento de energía renovable a gran escala. Las BFR se basan en las reacciones electroquímicas reversibles de dos pares redox disueltos en un electrolito (como el vanadio) que se almacena en tanques externos. Los electrodos, generalmente fieltros de carbono, son el componente central de la batería. En su superficie se llevan a cabo las reacciones de oxidación y reducción de los pares redox, lo que condiciona la densidad de potencia y la eficiencia energética de la batería [1]. Este trabajo tiene como objetivo la modificación de fieltros de carbono con óxido de grafeno reducido dopado con nitrógeno y su estudio como electrodos positivo y negativo en baterías de flujo redox de vanadio. El óxido de grafeno (GO) se obtuvo mediante la exfoliación de grafito en polvo comercial mediante un método Hummers modificado [2]. El dopaje con N se llevó a cabo mezclando el GO con urea y tratándolo térmicamente en una atmósfera de N2 a diferentes temperaturas (N-rGO-T). El comportamiento electroquímico de los materiales obtenidos se midió en una celda de 3 electrodos. Las voltamperometrías cíclicas muestran una clara influencia de la temperatura del tratamiento térmico. Se puede observar una mejora progresiva de la corriente al aumentar la temperatura del tratamiento térmico, obteniendo el mejor resultado en el material tratado a 800 °C., Los autores agradecen la financiación del CSIC a la Plataforma Temática Interdisciplinar PTI-FLOWBAT. A. Molina agradece al Ministerio de Universidades su contrato pre-doctoral FPU. Y al Gobierno de Aragón por la financiación al grupo T06-20R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Dinámica temporal de la temperatura del xilema en olivo y almendro

  • Román Ecija, Miguel
  • Landa, Blanca B.
  • Testi, Luca
  • Navas Cortés, Juan Antonio
Trabajo presentado en el XVI Congreso Nacional de Ciencias Hortícolas, celebrado en Córdoba del 17 al 22 de octubre de 2021., La temperatura es un factor determinante en el desarrollo de enfermedades vasculares en cultivos, como las producidas por Verticillium dahliae o Xylella fastidiosa. Los patrones de temperatura en el interior de las partes leñosas de la planta podrían diferir de los del aire debido, entre otros factores, a la inercia térmica de la madera, la radiación incidente y el sombreado por la copa. Los objetivos de este trabajo fueron describir la dinámica de la temperatura en los vasos del xilema a lo largo del tiempo, determinándose mediante modelos de regresión la relación entre la temperatura del aire y la medida por sensores situados en el xilema de ramas y del tronco, así como del suelo en olivo y almendro. Para ello, se instalaron termopares con orientación norte y sur en las ramas y a 1 y 4 cm de profundidad en el tronco en cuatro árboles de cada cultivo. La temperatura se registró a intervalos de 10 minutos durante 31 meses en la parcela de olivo (de diciembre 2017 a junio 2020) y 14 meses en la de almendro (de febrero 2018 a marzo 2019). Para ambos cultivos, tanto los análisis de los patrones de temperatura de cada sensor a lo largo del tiempo como los modelos de regresión mostraron que la temperatura del xilema en las ramas fue similar a la del aire; por el contrario, la temperatura del xilema del tronco y del sistema suelo-raíces fue inferior a la del aire. El efecto amortiguador del tronco y el suelo fue mayor para la temperatura máxima durante los meses de verano, mientras que la temperatura mínima diaria estuvo acoplada a la temperatura del aire en todas las estaciones. Nuestros resultados indican la importancia de tener en cuenta las diferencias de temperatura entre el entorno del xilema y el aire en estudios epidemiológicos de enfermedades vasculares., 727987 XF-ACTORS (H2020-UE), E-RTA2017-00004-C06-02 AEI-INIA España y FEDER, la Interprofesional del Aceite de Oliva Español y Proyecto ITS2017-095 Consejería de Medio Ambiente, Agricultura y Pesca de las Islas Baleares,España.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Assessment of physiological traits of olive trees infected by Xylella fastidiosa subspecies

  • Román Ecija, Miguel
  • Olivares-García, Concepción
  • Rivas, J. C.
  • Velasco-Amo, María Pilar
  • Navas Cortés, Juan Antonio
  • Landa, Blanca B.
Trabajo presentado en la 9th Meeting of the IOBC-WPRS Working Group "Integrated Protection of Olive Crops", celebrado en Lisboa del 26 al 29 de octubre de 2021., The detection of the diseases caused by the plant pathogenic bacterium Xylella fastidiosa (Xf) is difficulted by the occurrence of asymptomatic infections, its long incubation period and non-specific and diagnostic symptoms. Early detection of infected plants based on the assessment of changes in physiological plant traits due to bacterial infection might be an important tool for pathogen detection, disease management and breeding for resistance to Xf in woody crops. Therefore, the objectives of this study were to evaluate the susceptibility to four Spanish Xf strains and the response to infection of three olive cultivars widely grown in Spain by measuring plant physiological traits with different leaf-level sensors and Xf-specific molecular diagnostic assays. Leaf measurements and petiole samplings were taken at the inoculation point, and at 5, 10, 15 and 20 cm above the inoculation points at 1, 3, 6, 12 and 18 months post-inoculation. Additionally, sampling of wood tissue was performed at 8 month post inoculation at the same plant sections of leaf sampling. Molecular diagnosis based on two qPCR tests was used to determine the presence and colonization level of the bacteria into the olive xylem tissues. The Dualex Scientific leaf clip sensor and two spectrometers (PolyPen RP400 and DLP NIRscan nano) covering the range of the electromagnetic spectrum from 340 and 1700 nm were used for leaf measurements to detect physiological changes. The Spanish strain XYL1961 from Xf subsp. pauca ST80 showed the highest colonization in the different olive cultivars as compared to strains from Xf subsp. multiplex from ST81 and ST6 from Spain and the Italian strain ‘DeDonno’ from Xf subsp. pauca ST53. On the other hand, from a total of 70 vegetation indices calculated related with chlorophyll, carotenoid and flavonoids content and structural related indexes a set was selected to discriminate between olive plants infected by Xf from those non-inoculated even in the absence of visible disease symptoms., This work has received funding from 727987 XF-ACTORS (H2020-UE), E-RTA2017-00004-C06-02 (AEI-INIA Spain and FEDER), and the Spanish Olive Oil Interprofessional. Project ITS2017-095 Consejería de Medio Ambiente, Agricultura y Pesca de las Islas Baleares, Spain.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Caracterización de la diversidad metabólica de aislados de Xylella fastidiosa mediante fenotipado de alto rendimiento

  • Román Ecija, Miguel
  • Navas Cortés, Juan Antonio
  • Landa, Blanca B.
IX Reunión del grupo Microbiología de Plantas - Sociedad Española de Microbiologia (SEM), 16 y 17 de febrero de 2021., La bacteria fitopatógena Xylella fastidiosa (Xf), habitante del xilema, es una de las principales amenazas a nivel mundial para la sanidad vegetal, ya que puede infectar más de 500 especies vegetales, y causar enfermedades severas en muchas de ellas. Esta bacteria se caracteriza por un crecimiento lento (fastidioso) y restringido al xilema que es la causa, en parte, de la dificultad para su aislamiento. A pesar de los importantes esfuerzos para conocer su diversidad genética y la patogenicidad de las nuevas cepas de la bacteria identificadas en Europa, la información disponible sobre su caracterización fenotípica es escasa, lo cual es fundamental para poder establecer posibles diferencias entre cepas que permitan explicar la infección diferencial sobre determinadas plantas huésped. El genoma de esta bacteria es muy pequeño, y se ha demostrado recientemente mediante la combinación de un modelo metabólico a escala genómica y fenotipado, que su red metabólica está completa, pero es sorprendentemente minimalista y carece de robustez. En este trabajo se ha determinado la diversidad metabólica de siete cepas de Xf pertenecientes a tres subespecies (fastidiosa, multiplex, pauca), aisladas de almendro, olivo, vid y acebuche, procedentes de España, Italia y Estados Unidos, mediante un sistema de fenotipado de alto rendimiento. Este sistema permite caracterizar la capacidad metabólica de las cepas estudiadas y establecer diferencias en el aprovechamiento de distintas rutas metabólicas, lo que contribuirá a complementar la información obtenida del genoma completo circularizado de estas cepas ya disponible. Para ello, se utilizaron microplacas de fenotipado (PM 1 a 5) de Biolog, que contienen una serie de compuestos que pueden ser usados como fuentes de carbono, nitrógeno, fósforo, azufre y suplementos nutricionales. El crecimiento de cada cepa se estimó diariamente mediante medidas de la absorbancia a 600 nm con un lector de microplacas. El análisis de las curvas de crecimiento generadas para cada compuesto indicó diferencias entre las cepas de Xf en las distintas placas utilizadas. Las mayores diferencias entre cepas se obtuvieron para algunos de los compuestos usados como fuente de carbono y de nitrógeno, y la cepa de Xf subsp. pauca ‘De Donno’, aislada del foco epidémico de Xf en Italia que presentó un perfil metabólico más diferenciado respecto a las cinco cepas aisladas en los focos en España de Xf subsp. fastidiosa y subsp. multiplex y una cepa americana de Xf subsp. fastidiosa., Financiación: Proyectos 727987 XF-ACTORS H2020-UE y E-RTA2017-00004-C06-02 ede AEI-INIA Spain, the Spanish olive oil Interprofesional and European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Effect of nitrogen doping method on the activity of Fe-N-C catalysts based on carbon xerogels for fuel cells

  • Álvarez Manuel, Laura
  • Alegre Gresa, Cinthia
  • Napal, Pedro F.
  • Sebastián del Río, David
  • Lázaro Elorri, María Jesús
3 figures, 1 table.-- Work presented at the EHEC 2022, European Hydrogen Energy Conference, 18-20 May, 2022. Madrid, Spain., The development of active and inexpensive non-precious metal catalysts is a necessary and essential requirement to replace currently used Pt-based catalysts, in order to reduce the cost of polymer electrolyte fuel cells(PEFC). [1] Catalysts based on the Fe-N-C structure develop high electroactivity towards the oxygen reduction reaction (ORR), the limiting reactionin fuel cells. To increase the catalysts activity, Fe must be dispersedin acarbon material with a high surfacearea.In this context, carbon xerogels are excellent candidates, as their main properties can be easily tailored: porosity, electrical conductivity and surface chemistry. [2] The meso/macroporosity of carbon xerogels can be designed by modifying the conditions of the synthesis process, while microporosity can be generated by subsequent carbonization/activation treatments [3].In the present work, on the basis of carbon xerogels with an optimal ratio of micro/meso/macroporosity, we investigate the effect of two different methods of nitrogen-doping in the catalytic activity of Fe-N-C catalysts. Catalysts are evaluated both in half-cell and single-cell configurations and their activity is correlated to their physical-chemical features., The authors wish to thank the Ministry of Science and Innovation and the AEI(MCIN/AEI/10.13039/501100011033) for the funding received with the reference project PID2020-115848RB-C21 and the Government of Aragon for funding the T06-20R group. L. Álvarez-Manuel wish to thank the Government of Aragon for her pre-doctoral contract., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Adaptive generation of multilingual questions and answers from web content

  • Gatius Vila, Marta|||0000-0003-0456-7912
(c) 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works., This article describes the adaptive generation of questions and answers from web content to assist the user when searching for information. The approach proposed integrates user models, domain-restricted knowledge representation, natural language and wrappers techniques. This proposal is based on the representation of the main concepts involved in a specific scenario as a set of attributes, and the user models as the subset of those conceptual attributes relevant for each user. The approach described has been applied to generate multilingual personalized questions and answers from web sites in two different domains: university courses and dissemination on nutrition.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

Portable lock-in amplifier for microcantilever based sensor array. Application to explosives detection using Co-BEA type zeolites as sensing materials

  • García-Romeo, D.
  • Calvo, B.
  • Medrano, N.
  • Pina, M.P.
  • Almazán, F.
  • Pellejero, I.
  • Urbiztondo, M.
  • Sesé, J.
  • Santamaría, J
Recent advances in microcantilever-based sensors have led to a significant increase in sensitivity, making them a competitive solution in highly demanding applications as explosives detection. However, these sensors face severe challenges related to: reliability, sensitivity, reproducibility and throughput; that have yet to be solved for commercial applications. This paper describes our efforts in this direction, particularly on the reproducible detection of nitroaromatic type explosives by means of parallelization combined with: i) nanoporous solids as sensing materials; and, ii) a portable lowpower electronic readout interface capable of both excitation and measurement of the multisensing platform. The response of the sensor array, comprising 4 microcantilevers, due to presence of 2-nitrotoluene, a common explosive taggant, has been properly monitored. The obtained results with 4 identical Co-BEA coated Si microcantilevers underline the importance of a proper sensing material degassing on the sensor performance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

Tailoring the plasmonic properties of gold-liposome nanohybrids as a potential powerful tool for light-mediated therapies

  • Rubio-Camacho, Marta
  • Martínez-Tomé, María José
  • Cuestas Ayllón, Carlos
  • Martínez de la Fuente, Jesús
  • Esquembre, Rocío
  • Mateo, C. Reyes
A fast and environmentally-friendly methodology has been developed by in situ synthesis of gold nanoparticles (AuNPs) on thermosensitive liposomes in different phase-states, obtaining nanohybrids with controllable and tunable plasmon modes within the visible/near-infrared region. Lipid phase, charge and synthesis temperature influence the final arrangement of AuNPs, so when the synthesis is performed on zwitterionic liposomes in fluid phase, discrete AuNPs with plasmon peaks in the visible region are obtained, while in gel phase AuNPs tend to aggregate forming nanoclusters, leading to plasmon bands gradually shifted to the infrared as the synthesis temperature decreases. The formed nanohybrids retain the physical properties of the liposomes (fluidity, degree of hydration, cooperativity) by maintaining the transition temperature in the mild-hyperthermia range, while preserving their light-to-heat conversion properties. Therefore, these nanohybrids can be considered excellent candidates as versatile photothermal agents with controlled drug delivery capacity, being powerful tools for light-mediated therapies.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Applying dependency relations to definition extraction

  • Espinosa-Anke, Luis
  • Saggion, Horacio
Comunicació presentada a la International Conference on Applications of Natural Language to Data Bases/Information Systems celebrada del 18 al 20 de juny de 2014 a Montpellier, França., Definition Extraction (DE) is the task to automatically identify definitional knowledge in naturally-occurring text. This task has applications in ontology generation, glossary creation or question answering. Although the traditional approach to DE has been based on hand-crafted pattern-matching rules, recent methods incorporate learning algorithms in order to classify sentences as definitional or non-definitional. This paper presents a supervised approach to Definition Extraction in which only syntactic features derived from dependency relations are used. We model the problem as a classification task where each sentence has to be classified as being or not definitional. We compare our results with two well-known approaches: First, a supervised method based on Word-Class Lattices and second, an unsupervised approach based on mining recurrent patterns. Our competitive results suggest that syntactic information alone can contribute substantially to the development and improvement of DE systems., We also acknowledge partial support from project Dr. Inventor (FP7-ICT-2013.8.1 611383), programa Ramón y Cajal 2009 (RYC- 2009-04291), and project number TIN2012-38584-C06-03 from Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, Spain.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Reading between the lines: overcoming data sparsity for accurate classification of lexical relationships

  • Necşulescu, Silvia
  • Mendes, Sara
  • Jurgens, David
  • Bel Rafecas, Núria
  • Navigli, Roberto
Comunicació presentada a: 4th Joint Conference on Lexical and Computational Semantics, celebrada a Denver, Colorado, Estats Units d'Amèrica, del 4 al 5 de juny de 2015., The lexical semantic relationships between word pairs are key features for many NLP tasks. Most approaches for automatically classifying related word pairs are hindered by data sparsity because of their need to observe two words co-occurring in order to detect the lexical relation holding between them. Even when mining very large corpora, not every related word pair co-occurs. Using novel representations based on graphs and word embeddings, we present two systems that are able to predict relations between words, even when these are never found in the same sentence in a given corpus. In two experiments, we demonstrate superior performance of both approaches over the state of the art, achieving significant gains in recall., The authors gratefully acknowledge the support of the CLARA project (EU-7FP-ITN-238405), the SKATER project (Ministerio de Economia y Competitividad, TIN2012-38584-C06-05) and of the MultiJEDI ERC Starting Grant no. 259234.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Weakly supervised definition extraction

  • Espinosa-Anke, Luis
  • Ronzano, Francesco
  • Saggion, Horacio
Paper presented at International Conference on Recent Advances in Natural Language Processing 2015 (RANLP 2015), Definition Extraction (DE) is the task to extract textual definitions from naturally occurring text. It is gaining popularity as a prior step for constructing taxonomies, ontologies, automatic glossaries or dictionary entries. These fields of application motivate greater interest in well-formed encyclopedic text from which to extract definitions, and therefore DE for academic or lay discourse has received less attention. In this paper we propose a weakly supervised bootstrapping approach for identifying textual definitions with higher linguistic variability than the classic encyclopedic genus-et-differentia definition, and take the domain of Natural Language Processing as a use case. We also introduce a novel set of features for DE and explore their relevance. Evaluation is carried out on two datasets that reflect opposed ways of expressing definitional knowledge., This work is partially funded by the SKATER project, TIN2012-38584-C06-03, Ministerio de Econom´ıa y Competitividad, Secretar´ıa de Estado de Investigaci´on, Desarrollo e Innovaci´on, Espa˜na; and Dr. Inventor (FP7-ICT-2013.8.1 611383).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

TALN-UPF: taxonomy learning exploiting CRF-based hypernym extraction on encyclopedic definitions

  • Espinosa-Anke, Luis
  • Saggion, Horacio
  • Ronzano, Francesco
This paper describes the system submitted by the TALN-UPF team to SEMEVAL Task 17 (Taxonomy Extraction Evaluation). We present a method for automatically learning a taxonomy from a flat terminology, which benefits from a definition corpus obtained by querying the BabelNet semantic network. Then, we combine a machine-learning algorithm for term-hypernym extraction with linguistically-motivated heuristics for hypernym decomposition. Our approach performs well in terms of vertex coverage and newly added vertices, while it shows room for improvement in terms of graph topology, edge coverage and precision of novel edges., Paper presented at 9th International Workshop on Semantic Evaluation (SemEval 2015);2015 June 4-5; Denver, Colorado., This work is partially funded by the SKATER project, TIN2012-38584-C06-03, Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, España; and project Dr. Inventor (FP7-ICT-2013.8.1 611383).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Choosing which to use? A study of distributional models for nominal lexical semantic classification

  • Romeo, Lauren
  • Lebani, Gianluca E.
  • Bel Rafecas, Núria
  • Lenci, Alessandro
Comunicació presentada a: Ninth International Conference on Language Resources and Evaluation, celebrada a Reykjavik, Iceland, del 26 al 31 de maig de 2014., This paper empirically evaluates the performances of different state-of-the-art distributional models in a nominal lexical semantic classification task. We consider models that exploit various types of distributional features, which thereby provide different representations of nominal behavior in context. The experiments presented in this work demonstrate the advantages and disadvantages of each model considered. This analysis also considers a combined strategy that we found to be capable of leveraging the bottlenecks of each model, especially when large robust data is not available., This work was funded with the support of the SUR of the DEC of the Generalitat de Catalunya and the European Social Fund, by SKATER TIN2012-38584-C06-05 and the EBES-IULA/UPF mobility grant, as well as the PRIN grant 20105B3HE8 ”Word Combinations in Italian: theoretical and descriptive analysis, computational models, lexicographic layout and creation of a dictionary”, funded by the Italian Ministry of Education, University and Research.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Class-based word sense induction for dot-type nominals

  • Romeo, Lauren
  • Martínez Alonso, Héctor
  • Bel Rafecas, Núria
Comunicació presentada a: 6th International Conference on Generative Approaches to the Lexicon, celebrada a Pisa, Itàlia, del 24 al 25 de setembre del 2013., This paper describes an effort to capture the sense alternation of dot-type nominals using Word Sense Induction (WSI). We propose dot-type nominals generate more semantically consistent groupings when clustered into more than two clusters, accounting for literal, metonymic and underspecified senses. Using a class-based approach, we replace individual lemmas with a placeholder representing the entire dot type, which also compensates for data sparsity. Although the distributional evidence does not motivate an individual cluster for each sense, we discuss how our results empirically support theoretical proposals regarding dot types., This work was funded with the support of the SUR of the DEC of the Generalitat de Catalunya and the European Social Fund, by the European Commission’s 7th Framework Program under grant agreement 238405 (CLARA) and by SKATER TIN2012-38584-C06-05.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Boosting the creation of a treebank

  • Arias Badia, Blanca
  • Bel Rafecas, Núria
  • Fomicheva, Marina
  • Larrea Mendizabal, Imanol
  • Lorente, Mercè
  • Marimon, Montserrat
  • Milà-Garcia, Alba
  • Vivaldi, J. (Jorge), 1952-
  • Padró, Muntsa
Comunicació presentada al 9th International Conference on Language Resources and Evaluation (LREC'14), celebrat del 26 al 31 de maig de 2014 a Reykjavík, Islàndia., We present the results of the experiment of bootstrapping a Treebank for Catalan by using a Dependency Parser trained with Spanish sentences. In order to save time and cost, our approach was to profit from the typological similarities between Catalan and Spanish to create a first Catalan data set quickly by (i) automatically annotating with a delexicalized Spanish parser, (ii) manually correcting the parses, and (iii) using the Catalan corrected sentences to train a Catalan parser. The results showed that the number of parsed sentences required to train a Catalan parser is about 1000, which were achieved in 4 months with 2 annotators., This work was partially supported by the SKATER project (Ministerio de Economía y Competitividad, TIN2012-38584-C06-05).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Adaptive generation of multilingual questions and answers from web content

  • Gatius Vila, Marta
(c) 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works., This article describes the adaptive generation of questions and answers from web content to assist the user when searching for information. The approach proposed integrates user models, domain-restricted knowledge representation, natural language and wrappers techniques. This proposal is based on the representation of the main concepts involved in a specific scenario as a set of attributes, and the user models as the subset of those conceptual attributes relevant for each user. The approach described has been applied to generate multilingual personalized questions and answers from web sites in two different domains: university courses and dissemination on nutrition., Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A cascade approach for complex-type classification

  • Romeo, Lauren
  • Mendes, Sara
  • Bel Rafecas, Núria
Comunicació presentada a: Ninth International Conference on Language Resources and Evaluation, celebrada a Reykjavik, Iceland, del 26 al 31 de maig de 2014., The work detailed in this paper describes a 2-step cascade approach for the classification of complex-type nominals. We describe an experiment that demonstrates how a cascade approach performs when the task consists in distinguishing nominals from a given complex-type from any other noun in the language. Overall, our classifier successfully identifies very specific and not highly frequent lexical items such as complex-types with high accuracy, and distinguishes them from those instances that are not complex types by using lexico-syntactic patterns indicative of the semantic classes corresponding to each of the individual sense components of the complex type. Although there is still room for improvement with regard to the coverage of the classifiers developed, the cascade approach increases the precision of classification of the complex-type nouns that are covered in the experiment presented., This work was funded with the support of the SUR of the DEC of the Generalitat de Catalunya and the European Social Fund, by SKATER TIN2012-38584-C06-05, and by Fundação para a Ciência e a Tecnologia (FCT) post-doctoral fellowship SFRH/BPD/79900/2011.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A deeper exploration of the standard PB-SMT approach to text simplification and its evaluation

  • Štajner, Sanja
  • Béchara, Hannah
  • Saggion, Horacio
Comunicació presentada a: the 53rd Annual Meeting of the Association for Computational Linguistics and the 7th International Joint Conference on Natural Language Processing del 26 al 31 de juliol de 2015 a Beijing, Xina., In the last few years, there has been a growing number of studies addressing the Text Simplification (TS) task as a monolingual machine translation (MT) problem which translates from ‘original’ to ‘simple’ language. Motivated by those results, we investigate the influence of quality vs quantity of the training data on the effectiveness of such a MT approach to text simplification. We conduct 40 experiments on the aligned sentences from English Wikipedia and Simple English Wikipedia, controlling for: (1) the similarity between the original and simplified sentences in the training and development datasets, and (2) the sizes of those datasets. The results suggest that in the standard PB-SMT approach to text simplification the quality of the datasets has a greater impact on the system performance. Additionally, we point out several important differences between cross-lingual MT and monolingual MT used in text simplification, and show that BLEU is not a good measure of system performance in text simplification task., The research described in this paper was partially funded by the project SKATER-UPFTALN (TIN2012-38584-C06-03), Ministerio de Econom´ıa y Competitividad, Secretar´ıa de Estado de Investigaci´on, Desarrollo e Innovaci´on, Spain, and the project ABLE-TO-INCLUDE (CIP-ICTPSP- 2013-7/621055). Hannah B´echara is supported by the People Programme (Marie Curie Actions) of the European Union’s Seventh Framework Programme FP7/2007-2013/ under REA grant agreement no. 31747.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Towards the automatic classification of complex-type nominals

  • Romeo, Lauren
  • Mendes, Sara
  • Bel Rafecas, Núria
Comunicació presentada a: 6th International Conference on Generative Approaches to the Lexicon, celebrada a Pisa, Itàlia, del 24 al 25 de setembre del 2013., The work presented here depicts experiments toward the automatic classification of complex-type nominals using distributional information. We conducted two experiments: classifying complex-type nominals as members of multiple individual lexical classes, and building a dedicated classifier for complex-type nominals, distinguishing them from simple types. We discuss the promising results obtained, with a focus on asymmetries observed and on lines to be explored in the future., This work was funded with the support of the SUR of the DEC of the Generalitat de Catalunya and the European Social Fund, by SKATER TIN2012-38584-C06-05 and by Fundação para a Ciência e a Tecnologia (FCT) post-doctoral fellowship SFRH/BPD/79900/2011.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Hypernym extraction: combining machine-learning and dependency grammar

  • Espinosa-Anke, Luis
  • Ronzano, Francesco
  • Saggion, Horacio
Comunicació presentada a la 16th International Conference, (CICLing) celebrada del 14 al 20 d'abril de 2015 a El Caire, Egipte., Hypernym extraction is a crucial task for semantically motivated NLP tasks such as taxonomy and ontology learning, textual entailment or paraphrase identification. In this paper, we describe an approach to hypernym extraction from textual definitions, where machine-learning and post-classification refinement rules are combined. Our best-performing configuration shows competitive results compared to state-of-the-art systems in a well-known benchmarking dataset. The quality of our features is measured by combining them in different feature sets and by ranking them by their Information Gain score. Our experiments confirm that both syntactic and definitional information play a crucial role in the hypernym extraction task., This work is partially funded by the SKATER project, TIN2012-38584- C06-03, Ministerio de Economía y Competitividad, Secretaría de Estado de Investigación, Desarrollo e Innovación, España; and Dr. Inventor (FP7-ICT-2013.8.1 611383), programa Ramón y Cajal 2009 (RYC-2009-04291).
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

On the limitations of voice conversion techniques in emotion identification tasks

  • Barra Chicote, Roberto|||0000-0003-0844-7037
  • Montero Martínez, Juan Manuel|||0000-0002-7908-5400
  • Macías Guarasa, Javier|||0000-0002-3303-3963
  • Gutiérrez Arriola, Juana María|||0000-0003-0888-6582
  • Ferreiros López, Javier|||0000-0001-8834-3080
  • Pardo Muñoz, José Manuel|||0000-0002-1009-590X
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Dispositivos Móviles y Espacios Inteligentes Personales

  • Marsá Maestre, Iván|||0000-0002-5529-2851
  • López Carmona, Miguel Ángel|||0000-0001-9228-1863
  • Navarro Guillén, Andrés|||0000-0002-6748-7955
  • Hoz de la Hoz, Enrique de la|||0000-0003-4837-3837
Though personal mobile devices like cell phones and PDAs already offer their users some kinds of service personalization, service personalization through personal mobile devices can be taken one step further. In particular, personal devices can be used to integrate services provided within smart environments with the services provided at the personal devices themselves. In this paper, we present an approach for the seamless integration of personal devices and smart environments through the use of personal smart spaces. This would allow personal devices to become even more integrated in our everyday lives., Junta de Comunidades de Castilla-La Mancha, Comunidad de Madrid
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

A first study on the use of interval-valued fuzzy sets with genetic tuning for classification with imbalanced data sets

  • Sanz Delgado, José Antonio
  • Fernández, Alberto
  • Bustince Sola, Humberto
  • Herrera, Francisco
Classification with imbalanced data-sets is one of the recent challenging problems in Data Mining. In this framework, the class dis- tribution is not uniform and the separability between the classes is often difficult. From the available techniques in the Machine Learning field, we focus on the use of Fuzzy Rule Based Classification Systems, as they provide an interpretable model for the end user by means of linguistic variables. The aim of this work is to increase the performance of fuzzy modeling by adding a higher degree of knowledge by means of the use of Interval- valued Fuzzy Sets. Furthermore, we will contextualize the Interval-valued Fuzzy Sets with a post-processing genetic tuning of the amplitude of their upper bounds in order to enhance the global behaviour of this methodology., This work has been supported by the Spanish Ministry of Science and Technology under projects TIN2008-06681-C06-01 and TIN2007-65981.