Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 70
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Online poster presentation vs. Onsite. An experience in the pandemic context at undergraduate level

  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • Seguí Gil, Lucía|||0000-0002-2711-9445
  • Barrera Puigdollers, Cristina|||0000-0003-4408-3541
  • Castelló Gómez, María Luisa|||0000-0002-4889-1792
  • García Hernández, Jorge|||0000-0003-1258-6128
[EN] At present, the whole world is facing the COVID-19 pandemic and its impact on heath, economics, society, as well as on all education levels. The pandemic has driven an unexpected change from onsite delivery to courses fully or partially delivered online. As a consequence, development and evaluation of the competences defined for each degree will also be affected by these changes, for which activities and methodologies will need to be re-defined and evaluation processes adapted. Oral poster presentation is a learning experience through which students are invited to acquire both specific and transversal competences which are important in a scientific career. To this aim, oral poster presentation has been part of a ¿scientific congress simulation¿ experience in which students of 4th year of Degree in Biotechnology are involved yearly as part of the course ¿Bioprocess and bioproducts¿ (Escuela Técnica Superior de Ingeniería Agronómica y del Medio Natural, Universitat Politècnica de València). Previous years results have confirmed that through this experience students develop specific and transversal competences related to the biotechnologist research profile such as data basis searching, synthesis of information, results interpretation, deadline accomplishment and time management, as well as oral communicative skills. Due to the current situation, an online version of this activity has been piloted during the academic year 2020-21 with the aid of Microsoft Teams. Presential follow-up by teachers has been replaced by regular face-to-face virtual meetings with each student team. Microsoft Teams has also been used as a platform where uploading students¿ deliverables (index of contents, abstract including the entailment of the topic with the sustainable development goals, poster and screencast files). Each student team was asked to record a 5-min screencast to be visualized in a synchronic virtual poster session in front of a panel of experts of three different areas: Food biotechnology, Environmental biotechnology, and Biomedicine. Not only poster presentation, but also interaction with the experts after screencast visualization were considered for the assessment. For the latter, rubrics were specifically developed and shared with the panel of experts. This contribution aims to present the main results of this experience by analyzing the advantages and disadvantages of moving this activity from onsite to online, considering both students and teachers perceptions regarding development of the activity, quality of the results, as well as impact on assessment and competence development., The authors also thank UPV for financial support through the project PIME/20-21/208 "Aprendizaje Basado en Retos: una contribución a la adquisición significativa de competencias profesionales (transversales y específicas) del ámbito agroalimentario y biotecnológico".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Probabilistic analysis of a cantilever beam with load modelled via Brownian motion

  • Cortés, J.-C.|||0000-0002-6528-2155
  • López-Navarro, Elena|||0000-0003-0164-9007
  • Real Herráiz, Julia Irene
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
This work has been supported by the grant PID2020-115270GB-I00 funded by MCIN/AEI/10.13039/501100011033 and the grant AICO/2021/302 (Generalitat Valenciana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Enhancing Precision Medicine: An Automatic Pipeline Approach for Exploring Genetic Variant-Disease Literature

  • Contreras-Ochando, Lidia
  • Pla Santamaría, Ferran
  • Segarra Soriano, Encarnación
  • Marco-García, Pere|||0009-0003-7026-3543
  • León-Palacio, Ana|||0000-0003-3516-8893
  • Hurtado Oliver, Lluis Felip|||0000-0002-1877-0455
[EN] Advancements in genomics have generated vast amounts of data, requiring efficient methods for exploring the relationships between genetic variants and diseases. This paper presents a pipeline approach that automatically integrates diverse biomedical databases, including NCBI Gene, MeSH, LitVar2, PubTator, and SynVar, for retrieving comprehensive information about genes, variants, diseases, and associated literature. The pipeline consists of multiple stages: querying and searching across the different databases, extracting relevant data, and applying filters to refine the results. Its goal is to bridge the gap in information retrieval related to genetic variants and diseases by providing a systematic framework for discovering relevant literature. The pipeline uses open-access sources to uncover additional articles not referenced in expert reports that mention the genetic variants of interest. In this paper, we present the methodology of the pipeline, discuss its limitations and highlight its potential for advancing information systems, data management, and interoperability in the domains of genomics and precision medicine., This work is partially supported by MCIN/AEI/10.13039/501100011033, by the 'European Union' and 'NextGenerationEU/MRR', and by 'ERDF A way of making Europe' under grants PDC2021-120846-C44 and PID2021-126061OB-C41. It is also partially supported by the Generalitat Valenciana underproject CIPROM/2021/023. We would like to thank the authors of LitVar2 for their valuable assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Diseño y Exploración de Aceleradores Hardware en la Plataforma SELENE

  • Andreu-Cerezo, Pablo|||0000-0003-2070-9271
  • López Rodríguez, Pedro Juan|||0000-0003-4544-955X
  • Flich Cardo, José
  • Hernández Luz, Carles|||0000-0003-1192-6223
  • Picornell, Tomás
  • Kostalampros, Vatistas
  • Moreto, Miquel
[ES] El diseño de aceleradores hardware esta adquiriendo una gran importancia debido al aumento de aplicaciones que usan redes neuronales y la aproximacion al l¿mite de la ley de Moore. En este contexto, la exploracion de las opciones de diseño de estos aceleradores y su impacto en el rendimiento necesita de plataformas donde integrar dichos aceleradores de manera agil. Con esa finalidad este trabajo presenta la plataforma de SELENE, una plataforma abierta donde es sencillo integrar aceleradores diseñados en Xilinx HLS o con interfaz estandar AXI para su testeo en FPGA., El presente trabajo ha sido parcialmente financiado mediante el proyecto IPMAN (Tecnicas Innovadoras para Infraestructuras, Aplicaciones y Servicios en Centros de Datos y Sistemas Altamente Distribuidos) con referencia PID2021-123627OB-C51 y por la Generalitat Valenciana mediante el proyecto Subvenciones para la contratacion de personal investigador predoctoral con codigo CIACIF/2021/412.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

SYNPA: SMT Performance Analysis and Allocation of Threads to Cores in ARM Processors

  • Navarro-Edo, Marta|||0000-0002-4334-460X
  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[EN] Simultaneous multithreading processors improve throughput over single-threaded processors thanks to sharing internal core resources among instructions from distinct threads. However, resource sharing introduces inter-thread interference within the core, which has a negative impact on individual application performance and can significantly increase the turnaround time of multi-program workloads. The severity of the interference effects depends on the competing co-runners sharing the core. Thus, it can be mitigated by applying a thread-to-core allocation policy that smartly selects applications to be run in the same core to minimize their interference. This paper presents SYNPA, a simple approach that dynamically allocates threads to cores in an SMT processor based on their run-time dynamic behavior. The approach uses a regression model to select synergistic pairs to mitigate intracore interference. The main novelty of SYNPA is that it uses just three variables collected from the performance counters available in current ARM processors at the dispatch stage. Experimental results show that SYNPA outperforms the default Linux scheduler by around 36%, on average, in terms of turnaround time in 8-application workloads combining frontendbound and backend-bound benchmarks. Index Terms¿Simultaneous Multithreading, Scheduling, HighPerformance Computing, HPC applications, Thread-to-Core allocation, synergistic applications, intra-core interference., This work has been supported by the Spanish Ministerio de Ciencia e Innovacion and European ERDF under grant PID2021-123627OB-C51, TED2021-130233B-C32 and Generalitat Valenciana under grant AICO/2021/266. Marta Navarro is supported by Subvenciones para la contratacion de personal investigador predoctoral by CIACIF/2021/413 . Josue Feliu is supported by the RYC2021-030862-I contract, funded by the MCIN/AEI /10.13039/501100011033 and the European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Are Coronary Sinus Features Reflecting the Effect of Catheter Ablation of Atrial Fibrillation as P-waves Do?

  • Vraka, Aikaterini
  • Bertomeu-González, Vicente
  • Hornenro, Fernando
  • Langley, Philip
  • Alcaraz, Raúl
  • Rieta, J J|||0000-0002-3364-6380
[EN] Atrial substrate alteration due to catheter ablation (CA) of atrial fibrillation (AF) is primarily assessed from P-waves. Nonetheless, how CA affects critical structures is ignored. The aim of the current study is to investigate if CA effect on CS, the principal CA reference, is related to that observed from P-waves analysis. Five-minute lead II and bipolar CS recordings of 29 paroxysmal AF patients were obtained before, during and after CA. Duration, amplitude, area and heart-rate (HR) variability (HRV) features were calculated for P-waves and local activation waves (LAWs). Normalization mitigated the effect of HR fluctuations. Linear correlations between each P-wave and LAW were tested with linear regression (LR) and Pearson correlation (PC) and nonlinear correlations with cross-quadratic sample entropy (CQSE). Correlation between the CA effect on P-waves and LAWs was investigated with PC. Negligent statistical correlations were found by PC and LR for amplitude and area (¿3.30%< corr < +18.36%, p < 0.0142). After normalization, correlation in duration increased from non-significant to significant and from low to moderate (up to 47.25%, p < 0.0001). CQSE values were from 0.6 to 1.2. The effect of CA on P-waves and LAWs duration showed a moderate/high concordance after normalization (from 50% to 89%, p < 0.0210) and a highly tuned HRV (> 90%, p < 0.0297). Apart from HRV, no significant correlations between CS LAWs and P-waves have been found. HR fluctuations mask any possible tuning and normalization should be applied prior to the analysis., Research supported by grants DPI2017-83952-C3 from MINECO/AEI/FEDER UE, SBPLY/17/180501/000411 from JCCLM and AICO/2021/286 from GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Ultrasonic Holograms to Enhance Hyperthermia Volumes

  • Andrés, Diana
  • Vappou, Jonathan
  • Jimenez, Noe|||0000-0002-6539-670X
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] In this work we numerically and experimentally study the performance of large-volume hyperthermia induced by acoustic holographic-modulated high-intensity focused ultrasound (AHmHIFU) in gelatin phantoms. Excellent agreement was found between thermal simulations of the AHmHIFU system and temperature maps characterized with Proton Resonance Frequency Shift MR-thermometry at 1.5 T. ROIs inside which experimental temperature elevation was greater than 4 degrees were 11 mm by 16 mm and 7 mm by 30 mm with and without the holographic lens, respectively. Most importantly, standard deviation inside these ROIs were equal to 12% and 40% of the maximum temperature with and without the lens. This demonstrates that a wider and more uniform heated region can be generated using the holographic lens, showing the capabilities of acoustic holograms to be used as a low-cost alternative for large-volume hyperthermia treatments, This research has been supported by the Spanish Ministry of Science, Innovation and Universities (MICINN) through grants IJC2018-037897-I, FPU19/00601 and PID2019-111436RBC22, by the Agencia Valenciana de la Innovaci o through grants INNCON/2021/8 and INNVA1/2020/92, by Generalitat Valenciana through grant AICO/2020/268. Action co-financed by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana 2014-2020 (IDIFEDER/2018/022) and (IDIFEDER/2021/004).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

The random variable transformation method to solve some randomized first-order linear control difference equations

  • Navarro-Quiles, A.
  • Real Herráiz, Julia Irene
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
This work has been partially supported by the Spanish grant PID2020-115270GB-I00 funded by MCIN/AEI/10.13039/501100011033 and the grant AICO/2021/302 (Generalitat Valenciana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Is Short-Term Heart Rate Variability Good Enough to Predict Vascular Events in Hypertensive Patients?

  • Tornero, Roberto
  • Fácila, Lorenzo
  • Bertomeu-González, Vicente
  • Zangróniz, Roberto
  • Alcaraz, Raúl
  • Rieta, J J|||0000-0002-3364-6380
[EN] Vascular events are the main cause of premature death and disability in the developed countries, where there is great interest in the development of computational tools for their early detection. A very relevant variable for their study is the heart rate, that can be analyzed through heart rate variability (HRV). Furthermore, high blood pressure is an important risk factor for most cardiovascular diseases. In fact, small reductions in blood pressure are known to markedly reduce cardiovascular morbidity and mortality. This study evaluates the predictive value of short-term HRV (STHRV) by developing models based on data mining algorithms to stratify the risk of vascular events from hypertensive patients. For this specific framework, the performance of various machine learning models (Random Forest, Support Vector Machines, Gaussian Naive Bayes, K-N Nearest Neighbours and Logistic regression), trained with different time lengths of 5, 30 and 60 minutes of HRV features during sleep stage was compared. The analyzed HRV parameters were associated to time, frequency and nonlinear features. A total of 139 Holter recordings from hypertensive patients of whom 17 developed a vascular event were analyzed. Results indicated that classification models developed using STHRV, with only 5 minutes length, provided similar or even better results than those developed with longer time series. Furthermore, the STHRV models provided a higher sensitivity and a slightly higher F1 score. The best one, based on Support Vector Machines, yielded 88.2% sensitivity and 75% F1 score. Thus, this research suggests the feasibility of STHRV analysis for risk stratification of hypertensive patients to anticipate serious vascular events., Research supported by grants DPI2017¿83952¿C3 from MINECO/AEI/FEDER UE, SBPLY/17/180501/000411 from JCCLM and AICO/2021/286 from GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Probabilistic analysis of scalar random differential equations with state-dependent impulsive terms via probability density functions

  • Bevia-Escrig, Vicente-José
  • Jornet, M.
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
This work has been partially supported by the Spanish Ministerio de Economia, Industria y Competitividad (MINECO), the Agencia Estatal de Investigacion (AEI) and Fondo Europeo de Desarrollo Regional (FEDER UE) grant PID2020-115270GB-I00, the Generalitat Valenciana (grant AICO/2021/302) and by el Fondo Social Europeo y la Iniciativa de Empleo Juvenil EDGJID/2021/185. Vicente Bevia acknowledges the doctorate scholarship granted by Programa de Ayudas de Investigacion y Desarrollo (PAID), Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

CLARA: Semi-automatic Retraining System

  • Campos-Mocholí, Mario|||0009-0009-4721-2207
  • Chacón-Albero, Oriol de la Pau
  • Julian, Vicente|||0000-0002-2743-6037
  • Botti V.|||0000-0002-6507-2756
  • Marco-Detchart, Cédric
  • Rincón-Arango, Jaime Andrés
[EN] Recent advancements in computer vision have led to humanlevel performance in image recognition tasks, but challenges persist in real-world applications due to differences in data distribution. This paper introduces CLARA, a semi-automatic framework designed to continually retrain computer vision models by incorporating expert annotation of new data. The system was tested in a production environment with a waste image classification model and showed improved performance and robustness against evolving data distributions. This approach encourages collaboration among stakeholders in waste management and utilizes human-in-the-loop strategies to enhance model accuracy. The framework is adaptable to various models and tasks and, additionally, supports fusion techniques that combine outputs from multiple models to improve prediction robustness and overall system reliability., This work was partially supported with grant tPID2021- 123673OB-C31 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe , grant CIPROM/2021/077 from the Conselleria de Innovació, Universitats, Ciencias i Societat Digital GVA - PROMETEO, grant PAID-06-23 by the Vice Rectorate Office for Research from UPV and project Reciclaje Inteligente y Cooperativo en Toda la Cadena de Valor Orientado a Una Sociedad Sostenible 360º (INNEST/2022/180) from AVI.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Challenge-based learning applied to the design and explanation of certain mass transfer unit operations against a panel of experts

  • Castelló Gómez, María Luisa|||0000-0002-4889-1792
  • Barrera Puigdollers, Cristina|||0000-0003-4408-3541
  • Seguí Gil, Lucía|||0000-0002-2711-9445
  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • García Hernández, Jorge|||0000-0003-1258-6128
[EN] Technological advances of recent times make soft skills such as critical thinking, problem solving and collaborative work essential for university graduates to progress. Also, due to the ease of access to a large amount of information, alternative teaching-learning methods become necessary to catch the students¿ attention and motivate them to learn. To this end, challenge-based learning has been incorporated into the areas of science and engineering by involving students in real-world problems and in the development of specific solutions. In the context of the courses Transport Phenomena in the Food Industry I and II (Degree in Agrofood Engineering), 24 fourth-year students were challenged to fully describe and design a food process that includes both solid-liquid extraction and a hot air drying unit operation. To this aim, the students worked in groups of 3-4 people under the supervision of the lecturers. Students were asked to deliver 4 different tasks. Deliverable 1 consisted of a flow chart including the main stages of the process, which was carried out from the information found in different bibliographical sources. Along with it, an estimation of the mass flows of raw materials and finished products, together with the specification of the different variables involved in each one of the stages of the process were also submitted to evaluation (deliverable 2). The approach and resolution in an Excel file of those mass and energy balances that, along with other equations and the handling of specific graphs, are necessary to calculate the yield of the whole process and the flow rate and composition of each one of the intermediate streams were also assessed (deliverable 3). After that, students were asked to record a screencast regarding the decision-making and calculations to face the challenge. These screencasts were displayed against a panel of other expert lecturers who gave them some recommendations and evaluated the oral presentation following a rubric. To favour a much more objective evaluation, another rubric was employed to evaluate deliverables 1 to 3. In the opinion of the students, which was collected through a questionnaire at the end of the challenge-based learning experience, it allowed the students to develop both the specific skills of each one of the two subjects and the soft ones, specifically those related to collaborative work, problem solving, time control and oral communication., The authors thank UPV for the financul support given with the project PIME/20-21/208 entitled: "Aprendizaje basado en retos: una contribución a la adquisición significativa de competencias profesionales (transversales y específicas) del ámbito agroalimentario y biotecnológico".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

El COVID-19, la normativa de ventilación y su impacto ambiental en las universidades en México

  • Valencia-Salazar, Iván|||0000-0002-5223-4218
  • Peñalvo-López, Elisa|||0000-0002-3143-822X
  • Montañana-Romeu, Joaquín|||0000-0003-3331-9205
  • León-Martínez, Vicente|||0000-0002-1906-371X
[EN] This paper analyses the increase in energy consumption caused by COVID-19 containment measures in university classrooms in Mexico, particularly in hot humid areas where the use of air conditioning units is required. The effect of ventilation on classroom temperature, student comfort and air conditioning equipment consumption are analysed., Queremos agradecer a GENERALITAT VALENCIANA y a la Comisión Europea su apoyo en el marco del proyecto DECAB (NÚMERO de subvención GV/2021/149) y del proyecto H2020, SMEmPower (GA 847132).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Thread-to-Core Allocation in ARM Processors Buildings Synergistic Pairs

  • Navarro-Edo, Marta|||0000-0002-4334-460X
  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[EN] Simultaneous multithreading (SMT) processors can present significant throughput improvements over singlethreaded (ST) processors thanks to sharing internal core resources among instructions executing from multiple threads. However, resource sharing introduces inter-thread interference within the core, which negatively impacts individual application performance and can significantly increase the turnaround time of multi-program workloads. The severity of the intra-core interference on performance depends on the applications corunning in the same core. A thread scheduler can help reduce this effect by smartly selecting the pairs of applications that should run on each SMT core. This paper presents SYNPA, a simple approach that dynamically allocates threads to SMT cores based on their run-time dynamic behavior. SYNPA uses a regression model to select synergistic pairs to mitigate intra-core interference. Results show that SYNPA outperforms the default Linux scheduler by around 35%, on average, in terms of turnaround time when running 8- application workloads combining frontend-bound and backendbound applications., This work has been supported by the Spanish Ministerio de Ciencia e Innovacion and European ERDF under grant PID2021-123627OB-C51, TED2021-130233B-C32, and Generalitat Valenciana under grant AICO/2021/266. Marta Navarro is supported by Subvenciones para la contratacion de personal investigador predoctoral by CIACIF/2021/413 . Josue Feliu is supported by the RYC2021-030862-I contract, funded by the MCIN/AEI /10.13039/501100011033 and the European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

An Adaptive LoRa-Based Edge Architecture for Data Sensing and Collection in Natural Parks

  • Cecilia-Canales, José María|||0000-0001-5648-214X
  • Arratia-Uribe, Benjamín Andrés|||0000-0001-7869-053X
  • Rosas-Olivos, Erika Susana
  • Martín Furones, Ángel Esteban|||0000-0001-9379-0694
  • Perles, Angel|||0000-0002-5782-4284
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Manzoni, Pietro|||0000-0003-3753-0403
[EN] This article introduces the design of a flexible IoT/Edge architecture to overcome the challenges of deploying advanced sensors in remote settings such as natural parks. These environments demand reliable communication and considerable computational resources to manage the extensive real-time data from IoT devices like sensors and cameras. Our approach combines two LoRa-based protocols to efficiently handle large data blocks and ensure long-range communication, conserving energy and maintaining data integrity crucial for integrating sophisticated sensors with conventional IoT devices. The architecture offers edge computing within a containerbased gateway, simplifying on-site data processing and minimizing data traffic complexities. The MQTT protocol supports interoperability among distributed services, enhancing adaptability and efficiency in processing data locally or via cloud services like digital twins. We demonstrate this system¿s effectiveness through two case studies in natural parks: visitor counting using Time of Flight technology and water level measurement with GNSS data. These cases highlight the system¿s ability to handle frequent small and less frequent large data transmissions efficiently, This work has been supported by the MCSA-SE REMARKABLE grant ID: 101086387; Research project CIPROM/2023/29, funded by Direccio General de Ciencia ` i Investigacio Generalitat Valenciana - SPAIN; EU s Horizon ¿ 2020 research and innovation program No 101017861, by project Ramon y Cajal Grant RYC2018-025580-I, funded by ¿ MCIN/AEI/ 10.13039/501100011033 and ESF Investing in your future, GVA GRISOLIAP/2021/103 and Grant TED2021- 130890B funded by MCIN/AEI and by EU NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Diseño y uso de redes neuronales para estimar las prestaciones en solitario de las aplicaciones

  • Lurbe, Manel
  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[ES] Cuando varias aplicaciones se ejecutan concurrentemente en un computador con recursos compartidos, como las caches de último nivel o la memoria principal, se producen pérdidas de prestaciones por la interferencia entre aplicaciones en el uso de estos recursos respecto a su ejecución en solitario. Para reducir estas pérdidas, se han diseñado políticas para gestionar estos recursos (por ej., políticas de reparticionando del espacio de cache o de configuración de la prebúsqueda hardware). Un importante desafío en diferentes ámbitos, como la nube o los sistemas de tiempo real, es predecir cómo la acción de una determinada política afectaría a las prestaciones de cada aplicaciones antes de realizarla. Este trabajo presenta una propuesta basada en redes neuronales que, a partir de datos obtenidos por una aplicación en ejecución concurrente con otras aplicaciones, estima las prestaciones que tendría una aplicación en solitario. Los resultados experimentales muestran que la propuesta se adapta dinámicamente a los cambios en el comportamiento de las aplicaciones de la carga. Las prestaciones estimadas presentan, de media, un error del 11,7% y del 2,3% para las métricas MAPE y MSE, respectivamente., Trabajo financiado por el Ministerio de Ciencia, Innovaciçon y Universidades y ERDF bajo la ayuda RTI2018-098156-B-C51, por la GVA AICO/2021/266, por la UPV PAID-01-20. Josué Feliu con apoyo de un contrato de formación Juan de la Cierva (FJC2018-036021-I)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Design and use of an evaluation tool for assessment of instrumental skills within a subject related to materials science

  • Andrés-Ruiz, Víctor Tomás
  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
  • Sahuquillo, Oscar|||0000-0001-5360-3743
  • Benavente Martínez, Rut|||0000-0002-4566-9475
[EN] The interest in a competence-based approach in the university, continues increasing at a considerable rate in the European Higher Education Area. Generic competences (specific of the sort of education) assessment is nowadays considered crucial to support socio-educational demands. Nevertheless, the methodologies for the assessment/evaluation of the generic competences and their inclusion in the curriculum has yet to be adequately achieved. Competency-based learning requires either the development of new evaluation tools or adjustment of the existing ones in order to support marking changes needed for new learning-oriented active methodologies. In this sense, questionnaires are an innovative educational tool for competence evaluation although the development of a solid body of knowledge is still a pending task. For this reason, this study proposes a methodological tool based on a questionnaire for rating the assessment (or not) of Specific Instrumental generic competence (instrumental skills), as defined in our university, by undergraduate students. In this regard, a practical intervention was designed to integrate the evaluation of activities related to Instrumental Skills in undergraduate students of Chemical Engineering, taking advantage of a computer practice session programmed as a part of the Materials Science subject. The appropriateness of the developed questionnaire, based on some learning outcomes, as a tool to properly score the competence of interest has been analysed by comparison of the obtained marks with the ones coming from more regular evaluation tools. The results may lead to some interesting conclusions to university professors when creating appropriate competency-based scoring questionnaires., Authors gratefully acknowledge the financial support of the Vicerrectorado de Estudios, Calidad y Acreditación and the Vicerrectorado de Recursos Digitales y Documentación of the Universitat Politècnica de València (Project PIME B/19-20/165 and Project PIME C/20-21/201) and the Instituto de Ciencias de la Educación of the Universitat Politècnica de València (EICE INTEGRAL).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Development of Flexible, Conductive and Biocompatible Chitosan-Based Miniaturized Bioelectrodes for Enzymatic Glucose Biofuel Cells

  • García-Carmona, Laura
  • Buaki-Sogo, Mireia
  • Vegas-García, Marta
  • Gil Agustí, María Teresa
  • Llovera Segovia, Pedro|||0000-0001-6569-5710
  • Quijano-Lopez, Alfredo|||0000-0001-7916-8698
[EN] The need for new clean energy sources for portable devices in biomedical, agro-food industry and environmental related sectors boosts scientists towards the development of new strategies for energy harvesting for their application in biodevices development. In this sense, enzymatic biofuel cells (BFCs) have gained much attention in the last years. This work faces the challenge of develop new generation of BFCs able to be adapted to remote and personal monitoring devices within the framework of wearable technologies. To this aim, one of the main challenges consists of the development of conductive and biocompatible electrodes, which constitute a challenge itself due to the non-conductive capabilities of most of the biocompatible supports. Additionally, bioelectrodes may achieve good mechanical properties and resilience in order to be suitable for the envisioned application, which involves exposure to deformation during long-term use. Furthermore, it is desirable that the systems developed are versatile enough to be adapted to miniaturized supports for new personal wearable devices development. In the present work, selfstanding chitosan-carbon black membranes have been synthesized and modified with suitable enzymes for the assembly of an enzymatic glucose BFC. The membranes have been adapted to be integrated in miniaturized interdigitated gold electrodes as the step forward to miniaturized systems, modified with enzymes and metallic particles clusters and tested for energy harvesting from glucose solutions. The miniaturized system produces a power density of 0.64 ¿W/cm2 that is enhanced to 2.75 ¿W/cm2 in the presence of the metallic clusters, which constitute a 76% incensement. Such preliminary demonstrations highlight the good response of metals in bioelectrode configuration. However, energy harvesting real application of the developed miniaturized electrodes need still improvements but pave the way for the use of BFC as an energy source in wearable technologies due to their good mechanical, electrical and biocompatible properties., This work has been supported by the Generalitat Valenciana towards Instituto Valenciano de Competitividad Empresarial (IVACE) in accordance with the IMAMCL/2020/1 agreement and within the framework of the BioSensCell and BioCell-Power projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Towards a Low-Rank Approach to Compress Deep Neural Networks

  • Liern-Garcia, Marina
  • López-García, Aaron
  • Marco-Detchart, Cédric
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
[EN] In this work, we introduce a low-rank approach based on the truncated Singular Value Decomposition (SVD) technique to make deep neural networks (DNNs) smaller. Our method focuses on reducing the overall physical size of a neural network model without losing much in terms of its accuracy or increasing its error noticeably. Specifically, we applied our technique to a modified MobileNetV2 model, in the context of automatic plant diseases detection. We chose two of the biggest layers of the model and compressed them. Our goal was to see how this compression affects the breakdown of the layers, the error in rebuilding the layers, and how well the modified model performs. The results showed that the smaller model still predicts very accurately, even with the reduced physical size of its layers. By making these layers smaller, our approach offers a practical way to handle the deployment of large neural networks, especially in devices with limited resources, without compromising their effectiveness., This work was partially supported with grants TED2021-131295B-C32, PID2021-123673OB-C31 funded by MCIN/AEI/ 10.13039/ 501100011033 and by ERDF A way of making Europe , PROMETEO grant CIPROM/2021/077 from the Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital - Generalitat Valenciana, Early Research Project grant PAID-06-23 by the Vice Rectorate Office for Research from Universitat Politècnica de València (UPV)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

When AI Difficulty is Easy: The Explanatory Power of Predicting IRT Difficulty

  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • C. Monserrat|||0000-0003-1790-8085
  • Hernández-Orallo, José|||0000-0001-9746-7632
  • Castellano, David
[EN] One of challenges of artificial intelligence as a whole is robustness. Many issues such as adversarial examples, out of distribution performance, Clever Hans phenomena, and the wider areas of AI evaluation and explainable AI, have to do with the following question: Did the system fail because it is a hard instance or because something else? In this paper we address this question with a generic method for estimating IRT-based instance difficulty for a wide range of AI domains covering several areas, from supervised feature-based clas- sification to automated reasoning. We show how to estimate difficulty systematically using off-the-shelf machine learning regression models. We illustrate the usefulness of this estima- tion for a range of applications., This work has been partially supported by the EU (FEDER) and Spanish MINECO grant RTI2018-094403-B-C32 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe , Generalitat Valenciana under grant PROMETEO/2019/098, EU s Horizon 2020 research and innovation programme under grant agreement No. 952215 (TAILOR), the Future of Life Institute, FLI, under grant RFP2-152, US DARPA HR00112120007 (RECoG-AI), the AI-Watch and HUMAINT projects by DG CONNECT and DG JRC of the European Commission, and INNEST/2021/317 (Project cofunded by the European Union with the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) de la Comunitat Valenciana 2014-2020).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Altered pelvic floor muscle activity associated with the use of intravaginal probes in severe vulvodynia

  • Albaladejo-Belmonte, Mónica
  • Mira-Tomás, J. M.
  • Villa-Muñoz, P.
  • Nohales-Alfonso, F. J.
  • Alberola Rubio, J.
  • Guijarro Estelles, Enrique|||0000-0003-0606-2352
  • Garcia-Casado, Javier|||0000-0003-1410-2721
[EN] Vulvodynia is usually associated with a hypertonic dysfunction of the pelvic floor muscles (PFM), so surface electromyography (sEMG) can be used to assist patient¿s assessment. Although recordings are typically performed with intravaginal probes, they provoke pain and may alter PFM activity, so the aim of this study was to assess differences in sEMG signals recorded with self adhesive electrodes in the presence vs. absence of an intravaginal probe according to pain intensity. Twenty-four patients with vulvodynia were treated with incobotulinumtoxinA and monitored after treatment. Their PFM activity and pain were assessed by monopolar and bipolar sEMG recordings with self adhesive electrodes and by Visual Analogue Scale (VAS), respectively. Recordings performed before treatment and in a follow-up visit were classified into two groups: severe pain and moderate/mild/no pain. Root mean square (RMS), median frequency (MDF) and sample entropy (SampEn) of signals were compared when the probe was into vs. out of the vagina in both groups. In severe pain group, PFM contractile activity had a significantly lower power when the probe was into the vagina than out of it, as shown by lower RMS values in monopolar recordings, especially in M3 (median[interquartile range] in vs. out: 3.8[2.7]mV vs. 4.4[2.5]mV; p-value<0.01). This implies that deep PFM activation decreases during contractions when a probe is inserted into the vagina in severe vulvodynia, probably because of the patients¿ reluctance to perform maximum contractions, given the pain elicited by the pressure of the probe. Patient¿s evaluation should thus avoid using intravaginal probes and increase that of self-adhesive electrodes., This study was funded by Generalitat Valenciana in Programa para la promoción de I+D+i ACIF/2021/012, AICO/2021/126; and by private contracts from Merz Pharmaceuticals GmbH S.L.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Influencia de la morfometría y las propiedades aparentes en la integridad estructural del hueso trabecular humano enfermo y sano

  • Megías-Díaz, Raquel|||0000-0002-1698-7108
  • Belda Ricardo|||0000-0003-3913-5773
  • Vercher Martínez, Ana|||0000-0003-3695-6461
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[ES] En este trabajo, se han estudiado las relaciones entre la morfometría y la respuesta mecánica de hueso trabecular humano. Las muestras analizadas proceden de cabezas femorales humanas y están divididas en tres grupos: grupo sano (GS), grupo artrósico (GA) y grupo osteoporótico (GO). Las muestras se han escaneado mediante micro-CT para disponer de la geometría y poder realizar el estudio morfométrico de la microarquitectura trabecular. Se han llevado a cabo ensayos de compresión cuasiestática en la dirección más rígida de las muestras hasta producir su fractura. La influencia entre los parámetros se ha estudiado mediante correlaciones lineales por grupos de forma independiente, ya que el comportamiento aparente es tan diferente entre las muestras que las relaciones obtenidas analizando todas las muestras en conjunto no son relevantes y presentan unos coeficientes de correlación muy bajos. El grupo sano (GS) es el que presenta relaciones relevantes (con un p-valor < 0.05) con la densidad de conectividad Conn.D, el número de trabéculas Tb.N, el área superficial de hueso BS y la dimensión fractal D. Además, también se han relacionado los parámetros aparentes obtenidos de los ensayos experimentales entre sí. Para el caso de GS, presenta correlación entre la tensión de fallo final ¿¿ y el módulo de Young aparente ¿¿¿¿. Respecto al grupo osteoporótico, tanto ¿¿ como ¿¿¿¿ presentan correlaciones con la separación trabecular Tb.Sp y el número de trabéculas Tb.N. Además, también presentan correlación ¿¿¿¿ y la deformación asociada a la que se da la tensión de fallo final ¿¿. El grupo artrósico (GA) es el que menos correlaciones presenta, únicamente entre ¿¿ y el volumen total de las muestras TV y entre ¿¿ y ¿¿¿¿. Las correlaciones lineales obtenidas indican que se podría determinar el módulo de Young aparente o la tensión máxima que soportan las muestras sin realizar los ensayos experimentales mediante la evaluación de imágenes micro-CT., Los autores desean agradecer la financiación recibidadesde la GVA por el programa PROMETEO 2021/046, y por los proyectos PID2020-118920RB-I00 y PID2020-118480RB-C21 y C22, financiado por MCIN/AEI/10.13039/5011000110 33 y por FEDER Una manera de hacer Europa y el proyecto PDC2021- 121368-C21 y C22 financiado por MCIN/AEI/10.13039/501100011033 y por la Unión Europea NextGenerationEU/PRTR .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Towards Sustainable Recycling: Advancements in AI-Based Waste Classification

  • Chacón-Albero, Oriol de la Pau
  • Campos-Mocholí, Mario|||0009-0009-4721-2207
  • Julian, Vicente|||0000-0002-2743-6037
  • Botti V.|||0000-0002-6507-2756
  • Marco-Detchart, Cédric
  • Rincón-Arango, Jaime Andrés
[EN] Despite global efforts in the pursuit of sustainable waste management practices, significant gaps for improvement persist, as evidenced by Spain¿s recycling rates lagging below European targets. As part of a larger initiative aiming to build an intelligent and collaborative environment to promote the Circular Economy, this paper investigates the potential of Image Classification in developing an intelligent assistant for waste disposal guidance. Tailored to Spain¿s recycling framework, an analysis of different state-of-the-art Image Classification architecture¿s performance on waste sorting is presented. Additionally, the paper explores aggregation techniques to enhance classification accuracy., This work was partially supported with grant PID2021- 123673OB-C31, TED2021-131295B-C32 funded by MCIN/AEI/10.13039/5011 00011033 and by ERDF A way of making Europe , grant CIPROM/2021/077 from the Conselleria de Innovació, Universitats, Ciencias i Societat Digital Generalitat Valenciana - PROMETEO and project Reciclaje Inteligente y Cooperativo en Toda la Cadena de Valor Orientado a Una Sociedad Sostenible 360º (INNEST/2022/180) from Agencia Valenciana de la Innovación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Novel Photoplethysmographic and Electrocardiographic Features for Enhanced Detection of Hypertensive Individuals

  • Cano, Jesús
  • Quesada, Aurelio
  • Ravelli, Flavia
  • Zangróniz, Roberto
  • Alcaraz, Raúl
  • Rieta, J J|||0000-0002-3364-6380
[EN] Hypertension is a major risk factor for many cardiovascular diseases, which are the leading cause of death worldwide. Regular monitoring is essential to provide early diagnosis since most patients with elevated blood pressure (BP) have asymptomatic hypertension. This work presents a method for BP classification using simultaneous electrocardiographic (ECG), photoplethysmographic (PPG) and BP signals. 86 recordings were used, being 35 normotensive, 26 prehypertensive and 25 hypertensive. It has been proposed 23 novel features to improve the discrimination between healthy and hypertensive individuals based on pulse arrival times (PAT) and morphological features from PPG, VPG and APG signal. Moreover, alternative classification models as Support Vector Machines (SVM), Naive Bayes or Coarse Trees were trained with the defined features to compare the classification performance. The classifier that provided the highest results comparing normotensive with prehypertensive and hypertensive subjects were Coarse Tree, providing an F1 score of 85.44% (Se of 86.27% and Sp of 77.14%). The use of new PPG and ECG features has successfully improved the discrimination between healthy and hypertensive individuals, around 7% of F1 score, so this machine learning methodology would be of high interest to detect HT introducing these techniques in wearable devices., Research supported by grants DPI2017-83952-C3 from MINECO/AEI/FEDER UE, SBPLY/17/180501/000411 from JCCLM and AICO/2021/286 from GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Ciencia ciudadana geográfica como fuente de datos en la ingeniería geomática

  • Hernández-Zetina, Sandra
  • Anquela Julián, Ana Belén|||0000-0001-6024-3790
  • Martín Furones, Ángel Esteban|||0000-0001-9379-0694
[EN] Este artículo presenta una experiencia de ciencia ciudadana geográfica mediante el desarrollo de una plataforma de cartografía participativa orientada a visibilizar la percepción de inseguridad en el espacio urbano. La iniciativa se implementó en dos ciudades Toluca (México) y Valencia (España), con estrategias de convocatoria adaptadas a cada contexto: mapatones presenciales en Toluca y difusión digital en redes sociales en Valencia. El conjunto de datos resultante se publicó bajo los principios FAIR, promoviendo su accesibilidad, interoperabilidad y reutilización en investigaciones futuras. Para ilustrar su potencial analítico, se desarrollaron dashboards interactivos que permiten explorar de forma dinámica los patrones espaciales identificados. En contextos de bajo presupuesto, se priorizó el desarrollo de un aplicativo web sobre aplicaciones móviles, facilitando su mantenimiento y garantizando una participación más inclusiva al eliminar barreras tecnológicas. Esta decisión refuerza un enfoque geomático centrado en la participación ciudadana y en el aprovechamiento del conocimiento local. Además, iniciativas como esta contribuyen al cumplimiento de los Objetivos de Desarrollo Sostenible (ODS), en particular aquellos relacionados con ciudades seguras e inclusivas (ODS 11) y la igualdad de género (ODS 5), al generar evidencia útil para la toma de decisiones basadas en datos abiertos y colaborativos., Este proyecto fue apoyado a través de las Subvenciones a grupos de investigación consolidados AICO 2022 con número de expediente CIAICO/ 2021 292 y subvencionado por la Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital de la Generalitat Valenciana. De igual forma, fue financiado por los Proyectos de Investigación Científica para la Consolidación de Grupos de Investigación y los Estudios Avanzados, con enfoque de inclusión e integridad en el Marco de los ODS 2024, de la Secretaría de Investigación y Estudios Avanzados de la Universidad Autónoma del Estado de México.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Results of a university experience, comparing face-toface, online and hybrid teaching in a context of Sarscov19

  • Tort-Ausina, Isabel|||0000-0002-1900-914X
  • Gómez-Tejedor, José-Antonio|||0000-0001-6854-0829
  • Molina Mateo, José|||0000-0002-0531-9876
  • Riera Guasp, Jaime|||0000-0002-4183-7195
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Martín-Cabezuelo, Rubén|||0000-0002-5642-4692
  • Vidaurre, Ana|||0000-0003-3394-1176
[EN] The irruption of sarscov19 in the spring of 2020 was a challenge for everyone, particularly university teaching, where solutions had to be improvised urgently. Technological resources and online teaching played a fundamental role, and the involvement of students, teachers and administration led to an acceptable outcome. After the first impact of the pandemic, new alternatives compatible with the protocols of social distancing and health security were proposed in the planning for the academic year 2020-2021. As in many other universities, a synchronous hybrid learning (SHL) model was offered at the Universitat Politècnica de València (UPV), combining online learning and face-to-face (F2F) activities. In the SHL model, some students attended classes in-person (the room capacity limited the number according to the minimum distances between people required) and stream for the rest of the students, who followed the class simultaneously. In addition, the classes were recorded to enable their asynchronous use. SHL was only used when the conditions were favourable. Vulnerable teachers were teaching entirely online in their groups. When the number of students in a group was small enough, teaching was fully F2F, maintaining the online option only for vulnerable or confined students. The laboratory practices followed a similar hybrid scheme. The tutorials were attended by email or videoconference, and the exams were preferably in-person, with ad hoc solutions in the cases of confined or vulnerable students. Between February and June 2021, a pilot experience was carried out in the Electricity course of the degree in Electronic Engineering and Industrial Automation at the UPV. Three groups were taught with a different methodology: online, SHL and F2F teaching. Planning, academic resources, and evaluation were the same in the three groups. All three followed active flipped classroom methods. In this paper, the student's academic outcomes and the results of opinion surveys conducted on the activities are presented. Results are analysed in terms of the three groups/methodologies showing reasonable doubts about the SHL model where, the academic results and the student's opinions are significantly lower than the other two methodologies. These results could help to decide the best methodological solution if we had a similar situation in the future., Authors would like to thank the Institute of Education Sciences of the Universitat Politècnica de València (Spain) for supporting the Teaching Innovation Group e-MACAFI and for the financial support through PIME Project PIME 20-21/220 and PIME Project PIME/2018/B25.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Improved Discrimination Between Healthy and Hypertensive Individuals Combining Photoplethysmography and Electrocardiography

  • Cano, Jesús
  • Hornero, Fernando
  • Quesada, Aurelio
  • Martínez-Rodrigo, Arturo
  • Alcaraz, Raúl
  • Rieta, J J|||0000-0002-3364-6380
[EN] Cardiovascular disease is one of the leading causes of death, with hypertension (HT) being its main risk factor. Its complications can be avoided with early treatment, but since these patients do not present any symptoms, HT is often detected at very advanced stages. This work presents a model for estimating blood pressure (BP) from electrocardiographic (ECG) and photoplethysmographic (PPG) signals, which can be easily obtained by means of wearable continuous monitoring devices. ECG, PPG and BP recordings from 86 patients were analyzed.A total of 34 standard and new features based on previous works were defined, such as pulse arrival times (PAT), and morphological characteristics of PPG signal. 37 classification models, ranging from Logistic Regression, Support Vector Machines (SVM), Nearest Neighbors, Naive Bayes or Coarse Trees were trained to compare discrimination results. The classifier that provided the highest performance when comparing normotensive patients with prehypertensive and hypertensive patients were Coarse Tree, providing an F1 score of 85.44% (Se of 86.27% and Sp of 77.14%). The use of PPG and ECG features has successfully discriminated between healthy and hypertensive individuals and, thus, could be used to detect HT by embedding these techniques in wearable devices., Research supported by grants DPI2017-83952-C3 from MINECO/AEI/FEDER UE, SBPLY/17/180501/000411 from JCCLM and AICO/2021/286 from GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Solving random fractional second order linear equations via the mean square Laplace transform

  • Burgos-Simon, Clara|||0000-0001-6385-4263
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
  • Villafuerte, L.
This work has been supported by the grant PID2020-115270GB¿I00 funded by MCIN/AEI/ 10.13039/501100011033 and the grant AICO/2021/302 (Generalitat Valenciana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Expanding student engagement in SDG 13 &apos, Climate Action&apos

  • Lull, Cristina|||0000-0001-9270-2365
  • Llinares Palacios, Josep Vicent|||0000-0002-9740-3281
  • Soriano Soto, Mª Desamparados
[EN] In September 2019, the UN Secretary-General called on all sectors of society to mobilize for a Decade of Action. The Decade of Action calls for accelerating sustainable solutions to all the world¿s biggest challenges by 2030. At the heart of Agenda 2030 for Sustainable Development are 17 Sustainable Development Goals (SDGs). SDGs aim to end poverty, protect the planet, and ensure peace and prosperity for all by 2030. The SDG 13 ¿Take urgent action to combat climate change and its impacts¿ has the target 13.3 ¿Improve education, awareness-raising and human and institutional capacity on climate change mitigation, adaptation, impact reduction and early warning¿. Nowadays, many universities are engaged in achieving SDGs. It is crucial that climate change is included as part of universities¿ teaching, and also the development of SDG 13 awareness activities for students. The objective of this study is to demonstrate the activity performed as part of a course in Meteorology that intends to increase students' awareness of the climate change problem. This action took place with students of the Bachelor¿s Degree in Environmental Sciences at the Universitat Politècnica de València (Spain). The prepared activity was entitled: Students committed to climate change. Its learning outcomes were to describe what happens to the temperature and CO¿ concerning climate change; explain how global warming is dominated by past and future CO¿ emissions; argue the importance of acting against global warming and cutting greenhouse gas emissions; and to enlighten students about the impact that our daily habits have on the environment. Performing this activity consisted in finding out about SDG 13 and the European CO2MVS initiative to accurately measure the amount of anthropogenic CO¿ emissions, and completing a questionnaire. The results obtained from the questionnaire show that 84% of university students are aware that climate change is happening now and it is caused mainly by human activities. Many students agreed with the following affirmations: a university must have a climate change policy (96%); a university must contribute in its operation to achieve the adaptation strategies to climate change set by the government (92%); a university must educate its students about the causes (100%) and impacts (100%) of climate change; a university should encourage its students to seek solutions to climate change problems (100%). A high percentage of the students (80%) confirmed that they adopt the necessary initiatives to reduce CO¿ as much as possible in their everyday lives. Twenty-four percent of them stated that they could not explain to other students the origin of CO¿ in the atmosphere, and 36% of the students did not have enough arguments to explain why adopting a wide range of technological measures and behavioral changes could limit the rise in the global average temperature to 2°C above pre-industrial levels. Finally, the students answered various open questions about how to reduce atmospheric CO¿ levels, individual actions to reduce the carbon footprint, social problems that climate change entails, and how citizens can be made aware of the importance of reducing CO¿. These results show the need to improve climate change knowledge in education., This work has been sponsored by the Vice-Rectorate for Organization of Studies, Quality and Accreditation of the Universitat Poltècnica de València (Valencia, Spain) as part of the UPV¿s Educational Innovation and Improvement Projects (Reference PIME 20-21/224) entitled Moving towards Sustainable Development Goals at the UPV: the poliODS Project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Aprendizaje basado en retos: Implementación interuniversitaria en la asignatura de Mejora Genética Animal, Challenge-based learning: Cross-university implementation in Animal Breeding

  • Ibáñez-Escriche, Noelia|||0000-0002-6221-3576
  • Casto-Rebollo, Cristina|||0000-0003-4646-345X
  • Formoso Rafferty, Nora
  • González Recio, Oscar
  • Casellas Vidal, Joaquim
[ES] En este trabajo se examinan los resultados obtenidos de la implementación interuniversitaria del aprendizaje basado en retos (ABR) a través del uso de las tecnologías de la información y comunicación (TIC) en la asignatura de Mejora Genética Animal. El reto consistió en llevar a cabo la mejora genética de un rebaño de vacuno lechero, mediante de un software en línea, en un entorno con limitaciones de manejo y económicas reales. Los alumnos obtuvieron una evolución positiva de los resultados a lo largo del reto, confirmando al ABP como una herramienta útil en el aprendizaje de la aplicación de la mejora genética animal. Por otra parte, las encuestas realizadas a los alumnos mostraron, en todas las universidades, una alta satisfacción con este tipo de aprendizaje, aunque indicaron posibles mejoras en la explicación inicial del reto. La aplicación de ABR ha sido muy positiva tanto desde un punto de vista de participación y motivación de los alumnos, como con el desarrollo del pensamiento crítico a través de la aplicación práctica de conceptos teóricos., [EN] This paper examines the results obtained from the interuniversity implementation of challenge-based learning (RBL) using information and communication technologies (ICTs) in animal breeding. The challenge faced by students consisted of managing the genetic improvement of a dairy cattle herd in an environment with real management and economic constraints using an online software online. The students achieved a positive evolution of the results along the challenge, confirming the PBA as a useful tool in learning the application of animal breeding. On the other hand, the student surveys showed, in all universities, a high satisfaction with this type of learning, although they indicated possible improvements in the initial explanation of the challenge. The application of ABR has been very positive both from the point of view of student participation and motivation, as well as with the development of critical thinking by the practical application of theoretical concepts., Al Instituto de Ciencias de la Educación de la Universidad Politécnica de València por financiar el proyecto de innovación educativa PIME/20-21/203.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

ELiRF-VRAIN at BioNLP Task 1B: Radiology Report Summarization

  • Ahuir-Esteve, Vicent|||0000-0001-5636-651X
  • Hurtado Oliver, Lluis Felip|||0000-0002-1877-0455
  • Segarra Soriano, Encarnación
[EN] This paper presents our system at the Radiology Report Summarization Shared Task-1B of the 22nd BioNLP Workshop 2023. Inspired by the work of the BioBART model, we continuously pre-trained a general domain BART model with biomedical data to adapt it to this specific domain. In the pre-training phase, several pre-training tasks are aggregated to inject linguistic knowledge and increase the abstractivity of the generated summaries. We present the results of our models, and also, we have carried out an additional study on the lengths of the generated summaries, which has provided us with interesting information., This work is partially supported by MCIN/AEI/10.13039/501100011033, by the "European Union and 'NextGenerationEU/MRR', and by 'ERDF A way of making Europe' under grants PDC2021-120846-C44 and PID2021-126061OB-C41. It is also partially supported by the Generalitat Valenciana under project CIPROM/2021/023, and by the Spanish Ministerio de Universidades under the grant FPU21/05288 for university teacher training.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

AI*LoRa: Enabling Efficient Long-Range Communication with Machine Learning at the Edge

  • Arratia-Uribe, Benjamín Andrés|||0000-0001-7869-053X
  • Rosas-Olivos, Erika Susana
  • Cecilia-Canales, José María|||0000-0001-5648-214X
  • Manzoni, Pietro|||0000-0003-3753-0403
  • Pietrosemoli, Ermanno
  • Zennaro, Marco
[EN] Efficient long-range communication is critical for environmental monitoring, especially when dealing with large data transfers in remote areas. We present an AI-driven dynamic RF configuration mode, which combines the advanced capabilities of a novel AI*LoRa model with an enhanced RF configuration request mechanism. By leveraging TinyML, AI*LoRa dynamically adjusts key parameters of the physical layer, based on real-time environmental data, ensuring robust and energy-efficient communication. We conducted extensive real-world testing across distances ranging from a few meters to over 100 kilometers to collect the dataset necessary for training our model. The results demonstrate that our approach achieved over 90% accuracy in predicting optimal settings, leading to an average improvement of over 170% in communication efficiency. These findings underscore AI*LoRa's significant potential to enhance long-range IoT deployments., This work has been supported by the MCSA-SE REMARKABLE grant ID: 101086387 and SMARTLAGOON grant No 101017861, by project Ramón y Cajal Grant RYC2018-025580-I, funded by MCIN/AEI/ 10.13039/501100011033 and ESF Investing in your future, GVA GRISOLIAP/2021/103 and Grant TED2021-130890B funded by MCIN/AEI and by EU NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Caracterización dinámica de explicaciones en sistemas autónomos con participación humana

  • Antoni Mestre
  • Albert Albiol, Manuela|||0000-0003-3747-400X
  • Pelechano Ferragud, Vicente|||0000-0003-1090-230X
  • Gil, Miriam
  • Panach, Jose Ignacio
[ES] La colaboración humano-sistema es un modelo de trabajo que permite combinar conocimientos y habilidades de humanos y máquinas. El objetivo de esta colaboración es superar situaciones complejas y garantizar una forma de trabajo adecuada y confiable. Para lograr una colaboración humano-sistema efectiva y eficiente, los sistemas deben ser transparentes, comprensibles y confiables para los humanos. Las explicaciones que el sistema ofrece a los humanos son mecanismos clave para lograr este tipo de sistemas. Sin embargo, el diseño de las explicaciones plantea una serie de desafíos en cuanto a las características que deben tener estas. Por ejemplo, ¿cuál es el contenido necesario para la explicación? ¿en qué momento se debe dar? ¿debe ser muy intrusiva para captar la atención del usuario?. En este trabajo, proponemos un modelo conceptual para caracterizar las explicaciones y, en base a este modelo conceptual, se construye un sistema que infiere las características que debe tener la explicación a ofrecer de acuerdo a la acción a explicar, el contexto del usuario y su perfil. En este trabajo, nos centramos en el dominio de la Smart Home, pero el enfoque es extrapolable a otros dominios., Trabajo financiado por la Generalitat Valenciana bajo el proyecto GV/2021/072 y cofinanciado por el MINECO bajo el proyecto AVANTIA PID2020-114480RB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Use of ict tools in hybrid environments of presential and virtual learning. Experience in two mechanical engineering subjects of master&apos, s degree

  • Pedrosa, Ana M.|||0000-0001-8069-5620
  • Vila Tortosa, María Paloma|||0000-0003-3399-231X
  • Llopis-Albert, Carlos|||0000-0002-1349-2716
  • Rupérez Moreno, María José|||0000-0001-8457-7963
[EN] In March 2020, the World Health Organization (WHO) raised to an international pandemic level the outbreak of the coronavirus (COVID-19) disease caused by the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV2). Consequently, the Spanish government declared the State of Alarm on March 14th, 2020. From that moment on, all non-essential activities were tightened lockdown. This measure affected all levels of education, and face-to-face learning was suspended until the end of the academic year. While the last year all the educational community was forced to suddenly move to online platforms, this year has been rather marked by the need of flexibility in the learning model. The main reasons are the constant threat of global lockdowns, the changing local mobility restriction measures and the forced isolation or quarantine in case of infections or close contact with someone with a positive Polymerase Chain Reaction (PCR) test. This situation has drastically affected the face-to-face teaching model. At the same time, this uncertain scenario has undoubtedly been an opportunity to implement Information and Communications Technology (ICT)activities in our teaching. This paper presents some actions implemented in two subjects of mechanical design of two different master¿s degrees with 36 and 19 students, respectively. The developed resources concern to the learning materials provided to the students, both for theoretical and practical lessons. The audio-visual materials generated over the classes, both videos and annotations on the virtual whiteboard, has also been managed. Finally, the delivery and defence of the students' works have been adapted. As it was foreseeable all, some of the students or the teacher, have followed the classes online over the term. In all cases, the developed materials and the methodology followed have been valid for use in face-to-face teaching, online and blended learning, thus providing the flexibility required. The level of success has been measured, mainly through a survey answered by the students. In addition, it has been analysed objective data, such as the marks and the number of visits or downloads of the documents uploaded to the UPV e-learning platform. Finally, it is concluded which actions taken would be valid for the post-COVID era., Authors gratefully acknowledge the financial support of the Vicerrectorado de Estudios, Calidad y Acreditación and the Vicerrectorado de Recursos Digitales y Documentación of the Universitat Politècnica de València (project PIME B/19-20/165 and project PIME C/20-21/201) and the Instituto de Ciencias de la Educación of the Universitat Politècnica de València (EICE INTEGRAL).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

The Risks to Vernacular Architecture Associated with Depopulation in the Valencian Community, Spain

  • Tortajada-Montalva, Eva|||0000-0001-8832-4218
  • Vegas López-Manzanares, Fernando|||0000-0003-0315-6839
  • Morocho-Jaramillo, David Eduardo|||0000-0002-5974-937X
[EN] Depopulation is the most widespread demographic phenomenon in Spain. In addition, the areas affected by depopulation hold the greatest proportion of vernacular architecture in the country, and this may in turn lead to a risk for conservation. This research identifies the risks presented by depopulation for conservation of vernacular architecture, which can be classified into three categories: sociocultural risks; physical and material risks; and risks in the management of vernacular architecture. The methodology used follows a two-fold bibliographical review of articles and books. Texts on demographics, culture and society were analysed, paying particular attention to mentions of architecture and housing, while a review of studies on vernacular architecture and heritage focused on aspects relating to depopulation, migration, and cultural loss. Based on these results, a methodology was developed to analyse the level of risk to vernacular architecture in areas with population loss. To do this, the risks identified in the bibliographical review were transformed into quantifiable vulnerability factors. A methodology was created to analyse the level of risk of vernacular architecture by vulnerability factor. This methodology has been contrasted and perfected in 180 municipalities affected by depopulation in the Comunidad Valenciana, for possible application in other similar contexts, both in Spain and abroad. , This research was supported by “Subvenciones para la contratación de personal investigador predoctoral (ACIF/2021/421) financiado por la Generalitat Valenciana y el Fondo Social Europeo” and is part of the research project “REHABITAT—Restauración y rehabilitación sostenible de viviendas tradicionales en contextos históricos” funded by the R&D&i programme of the Department for Innovation, Universities, Science and Digital Society of the Generalitat Valenciana (CIAICO/2022/035).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Calidad del agua en embalses de aguas claras de la cuenca del Júcar con imágenes Sentinel-2 nivel L2A

  • Caballero, Gabriel
  • Delegido, Jesus
  • Sòria-Perpinyà, Xavier
  • Sánchez-Pérez, Lissette
  • Ruiz-Verdú, Antonio
  • Alvado, Bárbara
  • Durán, María Concepción
  • Ortega, Danián
  • Vicente, Eduardo
  • Moreno, José
[ES] Sentinel-2 es una misión satelital del programa Copernicus que ofrece imágenes de 10 m de resolución espacial cada cinco días. Numerosos estudios han demostrado que es adecuado para la estimación de calidad de aguas en lagos y embalses. En este trabajo se estudian 7 embalses españoles de aguas claras de la cuenca del Júcar (Alarcón, Benagéber, Contreras, María Cristina, Regajo, Sitjar y Tous) en los que se han medido distintas variables, entre otras, la clorofila-a (Chl-a), los sólidos en suspensión (TSS), la profundidad de Disco de Secchi (SDD) y la ficocianina (PC). Con estos datos, junto a los espectros de reflectividad obtenidos de imágenes Sentinel-2 nivel L2A, es decir, con la corrección atmosférica que realiza la Agencia Espacial Europea, se han estudiado diferentes índices espectrales. Los resultados muestran que la PC se puede estimar con un índice NDI con las bandas B3 (560 ±17 nm) y B2 (490 ±32 nm), y un ajuste lineal; el SDD se puede obtener mediante un ajuste exponencial de un índice que combina las bandas B2, B3 y B4 (665 ±15 nm) y los TSS se pueden estimar con una relación lineal con un índice que combina las bandas B1 (443 ±10 nm), B2 y B3. Sin embargo, para la Chl-a no se ha encontrado un modelo único para todos los embalses, por lo que se han separado en dos grupos en función de su respuesta espectral. Para un grupo de embalses el modelo que da mejores resultados usa una combinación lineal de B2, B3 y B4 y en el otro se usa un índice tribanda, con las mismas bandas. Estos modelos permiten estimar la calidad del agua de estos embalses, mostrando tanto su distribución espacial como series temporales. Todo ello con un procesado sencillo y rápido que se puede hacer en la nube con las herramientas gratuitas de Copernicus., Este trabajo se ha llevado al cabo en el marco de dos proyectos de investigación. Por una parte, el convenio entre la Confederación Hidrográfica del Júcar y la Universidad de Valencia para el seguimiento de la calidad de aguas en embalses, lagos y otras masas de agua de la cuenca del Júcar, a partir de datos de sensores remotos de observación de la Tierra (Convenio TELEDEMB23). Por otra parte, el proyecto RESSBIO (Remote Sensing Spectroscopy for wetlands Biodiversity, CIPROM2021049) subvencionado por la Generalitat Valenciana dentro del programa Prometeo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

High temperature push-out tests on demountable shear connectors of steel-concrete composite beams

  • Mansilla-Ruiz, Roberto
  • Espinós Capilla, Ana|||0000-0001-7335-4676
  • Paya-Zaforteza, Ignacio
  • Romero, Manuel L.|||0000-0001-5247-4767
  • Odenbreit, Christoph
[EN] There is no denying that there is a growing need for reusable systems in the construction industry. This is not only a by-product of the increasing demand of materials, but also a necessity to reduce greenhouse gas emissions associated to the manufacturing process of construction components. Reusable systems aim to solidify the transition from a linear economy model to a circular economy model, where the lifecycle of materials is extended overtime. However, there are several factors that might hinder the reusability of structural components, ranging from regular use over a time period to accidental situations, such as earthquakes and fires. This experimental study focuses its efforts on the analysis of demountable shear connectors for composite structural systems under the influence of high temperatures that resemble a situation of fire. The main idea behind this experimental campaign is to combine a standard push-out test, where a specimen composed by a HEB-260 steel profile with reinforced concrete slabs connected to its flanges via high strength bolts is subjected to a vertical force by utilizing a hydraulic jack with a simultaneous thermal action. The tests reproduce a previous experimental campaign performed at the University of Luxembourg (cylinder and coupler systems), but subjected to 4 different temperatures (20, 300, 500 and 600 °C). The loss of strength of the connectors with the temperature, the failure mode and the reusability after a situation of fire are discussed in the present study.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Measuring User Experience of Adaptive User Interfaces using EEG: A Replication Study

  • Gaspar-Figueiredo, Daniel
  • Vanderdonckt, Jean
  • Abrahao Gonzales, Silvia Mara|||0000-0003-3580-2014
  • Insfran, Emilio|||0000-0003-0855-5564
[EN] Background: Adaptive user interfaces have the advantage of being able to dynamically change their aspect and/or behaviour depending on the characteristics of the context of use, i.e. to improve user experience. User experience is an important quality factor that has been primarily evaluated with classical measures (e.g. effectiveness, efficiency, satisfaction), but to a lesser extent with physiological measures, such as emotion recognition, skin response, or brain activity. Aim: In a previous exploratory experiment involving users with different profiles and a wide range of ages, we analysed user experience in terms of cognitive load, engagement, attraction and memorisation when employing twenty graphical adaptive menus through the use of an Electroencephalogram (EEG) device. The results indicated that there were statistically significant differences for these four variables. However, we considered that it was necessary to confirm or reject these findings using a more homogeneous group of users. Method: We conducted an operational internal replication study with 40 participants. We also investigated the potential correlation between EEG signals and the participants¿ user experience ratings, such as their preferences. Results: The results of this experiment confirm that there are statistically significant differences between the EEG variables when the participants interact with the different adaptive menus. Moreover, there is a high correlation among the participants¿ user experience ratings and the EEG signals, and a trend regarding performance has emerged from our analysis. Conclusions: These findings suggest that EEG signals could be used to evaluate user experience. With regard to the menus studied, our results suggest that graphical menus with different structures and font types produce more differences in users¿ brain responses, while menus which use colours produce more similarities in users¿ brain responses. Several insights with which to improve users' experience of graphical adaptive menus are outlined., This work was supported by the AKILA project (CIAICO/2021/303) funded by the GVA and the European Union through the Operational Program of the European Social Fund (ESF). D. GasparFigueiredo is recipient of a Predoctoral Research staff-training program (GVA ACIF/2021/172) funded by the GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Evolución de campos dunares asturianos (oriente-centro) entre 2014 y 2023 y su relación con el cambio climático

  • Pardo Rivera, Noa
  • Flor Blanco, Germán
  • Gómez Lende, Manuel
  • de Sanjosé Blasco, José Juan
[ES] En la siguiente investigación se ha llevado a cabo una cartografía entre 2014 y 2023 sobre la evolución de los frentes y superficies de los campos dunares correspondientes a Xagó, Verdicio, Rodiles (N Asturias) con el fin de observar el avance o retroceso en cada uno de los sectores. Para ello se han consultado las direcciones y los datos máximos y mínimos de oleajes, además de la supervisión de las rosas de oleajes y vientos proporcionada por Puertos del Estado en la boya de Cabo de Peña. También se han mirado los máximos y mínimos de mareas en el mareógrafo de Gijón. Se ha realizado la cartografía de los arenales usando las ortofotos históricas y actuales, y datos tomados en una salida de campo con un GPS en abril de 2023. Con todo ello, se puede avanzar que se está produciendo una progradación significativa en todos los campos dunares estudiados, de modo que, esto puede estar condicionado por la entrada paulatina de sedimentos retirados durante temporales pasados, además de acordonamientos puntuales en algunos sistemas.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Analysis of quantitative variables obtained from open data in gender violence prevention studies. Case Study: Valencia (Spain)

  • Anquela Julián, Ana Belén|||0000-0001-6024-3790
  • Balaguer-Puig, Matilde|||0000-0001-9860-8759
  • Gallego Salguero, Aurea Cecilia|||0000-0002-0793-8902
  • Hernández-Zetina, Sandra
  • Chiva, Juan Vicente
[EN] Gender-based violence is a threat to women's safety worldwide. The perception of public spaces as a real or perceived threat to women ("fear of space") is an important factor in considering urban safety and can play a key role in preventing gender-based violence by perpetrators who are strangers to the victim. This article discusses strategies for identifying geo-referenced variables to model this perception of urban space as a risk space for this type of gender-based violence. The various data required are costly to obtain and need to be kept up to date. For this reason, data provided by the open data portals of the Spanish, Valencian and local administrations and the OpenStreetMap platform were used. Information was obtained on socio-economic variables, the services sector, real-time traffic information and real estate data. As a first step, this paper presents a statistical study to determine and validate the correlation between these variables. The results of the study show a moderately high correlation between the selected real estate variables. The remaining variables show a moderate or low correlation. In addition to the results obtained, the existence of open data offered by government agencies in studies related to the evaluation of safety in public spaces is of fundamental importance., This research has been funded by the Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana, Spain (CIAICO/2021/292).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Probabilistic analysis of the pseudo-n order adsorption kinetic model

  • Andreu-Vilarroig, C.|||0000-0001-5083-4837
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Sferle, Sorina Madalina|||0000-0002-2028-1191
  • Navarro-Quiles, A.
This work has been partially supported by the Spanish Ministerio de Economía, Industria y Competitividad (MINECO), the Agencia Estatal de Investigacion (AEI) and Fondo Europeo de Desarrollo Regional (FEDER UE) grant PID2020-115270GB-I00, the Generalitat Valenciana (grant AICO/2021/302), el Fondo Social Europeo y la Iniciativa de Empleo Juvenil EDGJID/2021/185 and la ayuda PRE2021-101090, financiado por MCIN/AEI/10.13039/501100011033 y por el FSE+.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Hypertension Risk Assessment from Photoplethysmographic Recordings Using Deep Learning Classifiers

  • Cano, Jesús
  • Bertomeu-González, Vicente
  • Fácila, Lorenzo
  • Zangróniz, Roberto
  • Alcaraz, Raúl
  • Rieta, J J|||0000-0002-3364-6380
[EN] Regular monitoring of blood pressure (BP) is essential for early detection of cardiovascular diseases caused by hypertension, a potentially deadly condition without symptoms in its first stages. This study investigates whether deep learning techniques can assess risk levels of BP using only photoplethysmographic (PPG) recordings without the need of electrocardiographic (ECG) recordings, as in many previous studies. 15.240 segments from 50 different patients containing simultaneous PPG and arterial blood pressure (ABP) signals were analysed. GoogleNet and ResNet pretrained convolutional neural networks (CNN) with the scalogram of PPG signals obtained by continuous wavelet transform (CWT) used as input images were employed for the classification. The highest F1 score was achieved by discriminating normotensive (NT) patients from prehypertensive (PH) and hypertensive (HT), being 92.10% for GoogleNet and 93.91% for ResNet, respectively. In addition, intra-patient classification using different data segments for training and validation provided an F1 score of 90.28% with GoogleNet and 89.04% with ResNet. Time frequency transformation of PPG recordings to feed deep learning classifiers has been able to provide outstanding results in hypertension risk assessment without requiring either ECG recordings or feature extraction., Research supported by grants DPI2017-83952-C3 from MINECO/AEI/FEDER UE, SBPLY/17/180501/000411 from JCCLM and AICO/2021/286 from GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Application of Deep Neural Network Models for Blood Pressure Classification based on Photoplethysmograpic Recordings

  • Cano, Jesús
  • Fácila, Lorenzo
  • Langley, Philip
  • Zangróniz, Roberto
  • Alcaraz, Raúl
  • Rieta, J J|||0000-0002-3364-6380
[EN] The measurement of blood pressure (BP) in an uninterrupted and comfortable way for the subject is essential for early diagnosis and monitoring of cardiovascular diseases (CVD). In fact, hypertension is the main risk factor for CVD because, being a hidden health problem with no symptoms until late stages of the disease are reached. This work investigates whether deep neural network models are able to discriminate between healthy and hypertensive subjects based on photoplethysmographic (PPG) recordings, without the need of electrocardiographic (ECG) recordings as well as avoiding manual morphological feature extraction, as has been popularly used in many previous studies. Recordings analyzed consisted of 635 simultaneous PPG and arterial blood pressure (ABP) signals from 50 different patients. The classification was performed with GoogLeNet, ResNet-18 and ResNet-50 pretrained convolutional neural networks (CNN) using as input images the scalogram of PPG segments obtained by continuous wavelet transformation (CWT). Additionally, Adam and SGDM training solvers were used to compare classification performance. After applying early stopping to avoid overfitting, training was performed with more than half of the epochs using Adam optimizer. ResNet-18 CNN provided the highest classification performance with sensitivity of 95.68%, specificity of 93.65%, F1-score of 95.61% an Area under the Roc area of 98.77%. Hence, the application of deep neural network classification models using time frequency transformation of PPG recordings has been able to provide outstanding results in blood pressure classification without requiring neither morphological feature extraction nor ECG features., Research supported by grants DPI2017-83952-C3 from MINECO/AEI/FEDER UE, SBPLY/17/180501/000411 from JCCLM and AICO/2021/286 from GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Adapting an internal combustion engine to oxy-fuel combustion with in-situ oxygen production

  • Arnau Martínez, Francisco José|||0000-0003-2902-0630
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • García-Cuevas González, Luis Miguel|||0000-0001-9340-0617
  • Gutierrez-Castro, Fabio Alberto
[EN] In transport applications, reciprocating internal combustion engines still have important advantages in terms of endurance and refueling time and available infrastructure when compared against fuel cell or battery-based powertrains. Although conventional internal combustion engine configurations produce important amounts of greenhouse gases and pollutant emissions, oxy-fuel combustion can be used to mitigate to a great extent such emissions, mainly producing NOx-free, CO2 and H2O exhaust gases. However, the oxygen needed for the combustion, which is mixed with flue gases before entering the cylinder, has to be stored in an additional tank, which hinders the adoption of this technology. Fortunately, the latest developments in gas separation membranes are starting to produce extremely-high selectivity and high permeability oxygen-separation membranes. Using the waste heat of the exhaust gases to heat up a mixed ionic-electronic conducting membrane, and feeding it with pressurized air, it is possible to produce all the oxygen needed by the combustion process while keeping the whole system compact. This work presents a design of an oxy-fuel combustion engine with in-situ oxygen production. The numerical simulations show also that this concept keeps a competitive brake specific fuel consumption, while the high concentration of CO2 in the exhaust gases facilitates the introduction of carbon sequestration technologies, leading to potentially carbon-neutral internal combustion engines., The authors want to acknowledge the institution "Conselleria d'Educacio, Investigació, Cultura i Esport de la Generalitat Valenciana" and its grant program "Subvenciones para la contratacion de personal investigador de caracter predoctoral" for doctoral studies (ACIF/2020/246) funded by The European Union. This research was partially supported by the institution "Agencia Valenciana de la Innovacion (AVI)" and its grant program "Valorizacion y transferencia de resultados de investigación a las empresas. Línea 1. Valorizacion, transferencia y explotación por las empresas de resultados de I+D. Convocatoria 2021" for project named Demostrador de un motor de oxicombustion con captura de CO2 (DMOCCO2)" INNVA1/2021/38, under the European Regional Development Fund (ERDF) program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Estudio de la fractura a compresión de hueso trabecular sano, osteoporótico y artrósico procedente de cabezas femorales humanas

  • Megías-Díaz, Raquel|||0000-0002-1698-7108
  • Belda Ricardo|||0000-0003-3913-5773
  • Vercher Martínez, Ana|||0000-0003-3695-6461
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
[ES] En este trabajo se ha estudiado el comportamiento mecánico del hueso trabecular mediante ensayos experimentales de compresión y el desarrollo de modelos numéricos de elementos finitos. Las muestras proceden de cabezas femorales humanas y se agruparon en tres cohortes: grupo sano (GS), grupo osteoporótico (GO) y grupo artrósico (GA). Los especímenes se ensayaron en la dirección estimada de máxima rigidez y se sometieron a cargas de compresión cuasiestática hasta la fractura. La respuesta experimental permitió calibrar los modelos numéricos, estimando el módulo de Young del tejido óseo y las propiedades de fallo de las muestras. Los resultados muestran que el hueso sano soporta un 52% más de carga que el hueso osteoporótico, y que la deformación correspondiente a la tensión máxima es un 33% mayor en el GS que en el GO. Las muestras artrósicas presentan un comportamiento intermedio, más próximo al grupo osteoporótico que al sano, lo que indica que las patologías analizadas se asocian a menores niveles de carga y deformación frente al hueso sano. La calibración de los modelos numéricos proporciona valores similares de deformación de inicio de fallo y de fallo completo para las muestras patológicas, mientras que en las muestras sanas estos valores difieren. En consecuencia, la simulación de la fractura en hueso osteoporótico requiere considerar propiedades de fallo específicas, coherentes con un comportamiento más frágil que el del hueso sano. Finalmente, este trabajo permite cuantificar dichos parámetros e identifica como principal origen de las diferencias las características morfométricas propias de la microestructura del hueso trabecular no sano., Los autores desean agradecer la financiación recibida desde la GVA por el Plan FDEGENT 2018 GVA y por el programa PROMETEO 2021/046, y por los proyectos PID2020-118920RB-I00 y PID2020-118480RB-C21 y C22, financiado por MCIN/AEI/10.13039/501100011033 y por FEDER Una manera de hacer Europa y el proyecto PDC2021-121368-C21 y C22 financiado por MCIN/AEI/10.13039/501100011033 y por la Unión Europea NextGenerationEU/PRTR .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

OCEAN ART PROJECT: Divulgación del conocimiento del Patrimonio Cultural y Natural Marino en la infancia y juventud

  • Vivancos Ramón, María Victoria|||0000-0002-0099-9614
  • Lehmann-Gravier, Priscila|||0000-0002-5979-9174
  • Navarro-Moreno, Valeria|||0000-0003-1513-0521
[ES] Es un hecho latente que el patrimonio cultural y natural marino (tangible e intangible) está inmerso en una progresiva amenaza. Contemplando que tanto el deterioro como la desaparición de un bien patrimonial local, cultural o natural, contribuye al empobrecimiento del patrimonio global, esta pérdida toma una mayor gravedad y requiere de unas medidas de acción paliativas contundentes e inmediatas. Para poder acometer este cambio es preciso insistir en la correcta percepción de este valioso patrimonio relacionado con la cultura marina, ayudando en su conservación y progreso. Para ello, resulta imprescindible una labor divulgativa del conocimiento en un tramo fundamental de la sociedad: infancia y juventud. La responsabilidad de identificar, proteger, conservar y rehabilitar el patrimonio cultural y natural marino situado en nuestro territorio, así como de transmitirlo a las generaciones futuras, representa un cometido de máxima prioridad. Desde la Cátedra UNESCO Forum Universidad y Patrimonio Cultural de la Universitat Politècnica de València, a través de esta expresión de interés y con la inestimable ayuda de investigadores universitarios y profesionales externos, se ha puesto en marcha un proyecto que busca transmitir este patrimonio con rigor, imaginación y contenidos de calidad: Ocean Art Project. , Este estudio forma parte del programa THINKINAZUL y ha sido apoyado por MCIN con financiación de la Unión Europea NextGenerationEU (PRTR-C17.I1) y de la Generalitat Valenciana GVA-THINKINAZUL/2021/008; investigador principal: María Victoria Vivancos Ramón, Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Sociodemography and participatory design. Momovivso Project and the Virgen del Carmen Group, Valencia. Spain

  • Sosa Espinosa, Asenet|||0000-0001-9068-4263
[EN] Addressing demographic challenges is crucial when dealing with the complexity of heritage projects and urban regeneration processes. This is particularly evident in the Urban Agendas. Contributing to the knowledge of the social housing architecture of the Modern Movement requires an approach to the reality of its residents. They are the interlocutors who allow us to approach the evolution of this heritage, the pains and interventions they suffer in the construction and maintenance of life, housing, buildings and public space. But who are its residents? Answering this question is necessary before designing interventions. In the case study of the Momovivso research project, which focused on the possibilities of recovery and conservation of social housing of the Modern Movement in the Valencian Community, the possibilities of official statistics to know the sociodemographic profile of residents were examined. This was done as a preliminary step towards designing and applying participatory urban planning techniques. Participation requires the involvement and inclusion of different voices among the interlocutors involved in the process. Conducting a socio-demographic analysis can provide us with the necessary knowledge to answer the first question. This paper includes the possibilities offered by Spanish statistics and the proposal of social and demographic indicators in order to approach the profile of the residents of the Virgen del Carmen Group, built from 1958 to 1962 in the city of Valencia, Spain, as a case study of the proyect. All this, in the face of the demographic challenge, to guide the selection of the profile of the participants., This work is carried out within the Momovivso Research Project, funded by the Programme for the promotion of scientific research, technological development and innovation in the Valencian Community (AICO/2021), File AICO/2021/253.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Parallel Study on Surface and Invasive Recordings Across Catheter Ablation Steps of Paroxysmal Atrial Fibrillation

  • Vraka, Aikaterini
  • Hornero, Fernando
  • Quesada, Aurelio
  • Ravelli, Flavia
  • Alcaraz, Raúl
  • Rieta, J J|||0000-0002-3364-6380
[EN] Catheter ablation (CA) is the star treatment of atrial fibrillation (AF). However, important issues regarding its procedure have only been superficially explored. While universal CA effect is assessed, the role of right (RPVI) and left pulmonary vein isolation (LPVI) is ignored. Although coronary sinus (CS) is the prevailing CA reference, how CS itself is modified by CA is unknown. This work evaluates the effect of each ablation step on the atrial substrate and CS funtion. Five-minute lead II and bipolar CS recordings of 29 patients undergoing paroxysmal AF CA were acquired before CA, after LPVI and after RPVI (end of CA). Separate lead II and CS analysis was performed. Duration, amplitude, area and slope rate were calculated for each surface and invasive activation, then signal-averaged. Dispersion, morphology variability (MV) and time-domain heart-rate variability (HRV) features were also calculated. Non-parametric tests were recruited to compare each feature among all and in pairs of different ablation steps with Bonferroni correction. Variation of each feature was calculated in percentages. In surface recordings, duration was significantly shortened after LPVI (¿= -13%, p=0.001) and HRV showed a trend for attenuation (¿< -25%, p< 0.069) after RPVI. In CS recordings, HRV showed an increasing trend after LPVI (¿>+73%, p<0.04S), tending to decrease after RPVI (¿< -33%, p<0.064). Higher dispersion in variations was observed in CS than surface recordings. LPVI causes major alterations in atrial substrate, more prominently observed from lead II analysis. Notwithstanding, HRV variations are better illustrated in CS recordings. A combined analysis of both is recommended., Research supported by grants DPI2017-83952-C3 from MINECO/AEI/FEDER UE, SBPLY/17/180501/000411 from JCCLM and AICO/2021/286 from GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

WAPA: A Workload-Agnostic CPI-Based Thread-to-Core Allocation Policy

  • Navarro-Edo, Marta|||0000-0002-4334-460X
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Pallardó-Julià, Vicent
[EN] Simultaneous multithreading (SMT) processors improve system throughput by sharing core resources among the threads running on the same core. However, intra-core interference can cause co-running applications to degrade each other¿s performance significantly. To address this issue, some approaches have focused on balancing contention at the core shared resources (e.g. the shared L1 data cache). A key advantage of these approaches is that they are workload-agnostic. Other approaches improve the previous ones by modeling the inter-application interference across the intra-core shared resources. Unfortunately, these approaches require off-line model training for specific workloads. This paper presents WAPA, a CPI-based thread-to-core allocation approach that incorporates the best of both worlds. WAPA is a workloadagnostic policy that implicitly accounts for inter-thread interference across all the shared resources by leveraging the CPI. The proposed approach relies on the optimal transport (OT) theory, a mathematical theory to dynamically select symbiotic pairs of applications. Experimental results in an Intel Xeon show that WAPA outperforms the default Linux scheduler on average by 8.4% in IPC in workloads dominated by cache and main memory latencies, while performance gains of existing approaches are below 3.2%., This work has been partially supported by the Spanish Ministerio de Ciencia e Innovación and European ERDF under grants PID2021-123627OB-C51 and TED2021-130233B-C32. Marta Navarro is supported by Subvenciones para la contratación de personal investigador predoctoral by CIACIF/2021/413.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Integrating Human Feedback into a Reinforcement Learning-Based Framework for Adaptive User Interfaces

  • Gaspar-Figueiredo, Daniel
  • Fernández-Diego, Marta|||0000-0001-7340-2789
  • Abrahao Gonzales, Silvia Mara|||0000-0003-3580-2014
  • Insfran, Emilio|||0000-0003-0855-5564
[EN] Adaptive User Interfaces (AUI) play a crucial role in modern software applications by dynamically adjusting interface elements to accommodate users¿ diverse and evolving needs. However, existing adaptation strategies often lack real-time responsiveness. Reinforcement Learning (RL) has emerged as a promising approach for addressing complex, sequential adaptation challenges, enabling adaptive systems to learn optimal policies based on previous adaptation experiences. Although RL has been applied to AUIs,integrating RL agents effectively within user interactions remains a challenge. In this paper, we enhance a RL-based Adaptive User Interface adaption framework by incorporating personalized human feedback directly into the leaning process. Unlike prior approaches that rely on a single pre-trained RL model, our approach trains a unique RL agent for each user, allowing individuals to actively shape their personal RL agent's policy, potentially leading to more personalized and responsive UI adaptations. To evaluate this approach, we conducted an empirical study to assess the impact of integrating human feedback into the RL-based Adaptive User Interface adaption framework and its effect on User Experience (UX). The study involved 33 participants interacting with AUIs incorporating human feedback and non-adaptive user interfaces in two domains: an e-learning platform and a trip-planning application. The results suggest that incorporating human feedback into RL-driven adaptations significantly enhances UX, offering promising directions for advancing adaptive capabilities and user-centered design in AUIs., This work was funded by the GVA under the AKILA project (CIAICO/ 2021/303) and by the AEI under the UCI-Adapt project (PID2022- 140106NB-I00). D. Gaspar-Figueiredo is funded by the GVA (ACIF/ 2021/172), which is cofunded by the EU through the ESF.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Experimental Characterization of a MMW Signal Generation Approach Based on Optical Phase Modulation and Optical Filtering for Data Transmission over a Directly Modulated Laser

  • Botella-Campos, Marta|||0000-0002-1317-286X
  • Mora Almerich, José|||0000-0002-2877-4118
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] In this paper, we present a detailed characterization of a phase modulation (PM)–based approach employing optical filtering for photonic millimeter-wave (mmW) signal generation. Simulations and experimental results exhibit very good agreement, showing that both the bandwidth and the notch peak of the optical filter lead to the overall system response, with up to 15 dB electrical gain in the mmW band, also due to the combination of laser chirp and 10 km fiber dispersion. The system error-vector-magnitude (EVM) performance for a 25 MHz bandwidth QPSK signal is characterized over a wide range of electrical mmW power values and frequencies, while intermodulation distortion appears at high power levels. Accordingly, in the linear regime, it is observed that the 10 km SSMF link yields improved EVM values compared to OB2B in terms of RoP, while measurements for different ReP values show the transparency of this approach with no further degradation with respect to EB2B tests. Therefore, this method is confirmed as very promising for future deployment of mmW-based communication networks using photonic technologies for signal generation and transmission., The research leading to these results has received funding from Generalitat Valenciana (PROMETEO 2021/015) and MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe by Grant PID2021-126514OBI00 OPTIMISE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Solving non homogeneous linear second order difference equations with random initial values: Theory and simulations

  • Cortés, J.-C.|||0000-0002-6528-2155
  • Sferle, Sorina Madalina|||0000-0002-2028-1191
  • Navarro-Quiles, A.
This work has been supported by the grant PID2020-115270GB-I00 funded by MCIN/AEI/10.13039/501100011033 and the grant AICO/2021/302 (Generalitat Valenciana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Generación y adaptación de explicaciones &quot, Human-in-the-Loop&quot, en la &quot, Smart Home&quot

  • Antoni Mestre
  • Albert Albiol, Manuela|||0000-0003-3747-400X
  • Pelechano Ferragud, Vicente|||0000-0003-1090-230X
  • Gil, Miriam
  • Panach, Ignacio
[ES] Conseguir una colaboración persona-sistema efectiva y eficiente en sistemas autónomos con participación del humano (humanin-the-loop), requiere de sistemas transparentes, comprensibles, y que generen confianza en las personas. Las explicaciones constituyen la herramienta esencial para conseguir esto. Sin embargo, el camino hacia conseguir unas explicaciones comprensibles y no intrusivas presenta muchos desafíos. Es necesario identificar cuándo un usuario en un contexto particular requiere o no de una explicación, de esta forma se evita abrumar a los usuarios con explicaciones innecesarias, y generar una explicación comprensible ante esta situación, todo esto ayudando a la mejora de la experiencia de usuario. En este trabajo presentamos una propuesta para generar de forma automática explicaciones Human-in-the-Loop. Estas explicaciones se generan solo cuando se detecta la necesidad de explicación ante una acción de adaptación del sistema. Esto se consigue utilizando técnicas de Aprendizaje Automático que son capaces de inferir, a partir de la interacción que está llevando a cabo el humano con el sistema, si el usuario requiere explicaciones. Además, estas explicaciones se generarán en tiempo de ejecución de forma automática. Para ello, se utilizan técnicas de Generación de Lenguaje Natural para, a partir de la información sobre el sistema, generar una explicación., Trabajo financiado por la Generalitat Valenciana bajo el proyecto GV/2021/072 y cofinanciado por el MINECO bajo el proyecto AVANTIA PID2020-114480RB-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Evaluation activities performance of the specific instrumental transversal competence in subjects of the mechanical engineering area

  • Pedrosa, Ana M.|||0000-0001-8069-5620
  • Lozano-Mínguez, Estívaliz|||0000-0003-4576-826X
  • Besa Gonzálvez, Antonio José|||0000-0002-7084-9937
  • Vila Tortosa, María Paloma|||0000-0003-3399-231X
  • Martinez-Sanchis, Sandra|||0000-0002-3223-0623
  • Sánchez-Orgaz, Eva María|||0000-0002-8864-3056
[EN] Nowadays, the European higher education space is concerned, not only about the transmission of theoretical knowledge, but also about the acquisition of soft-skills, which are increasingly demanded in the professional profiles of graduates. Therefore, the Universitat Politècnica de València (UPV) has elaborated its own program aiming to develop these generic capabilities, which are embedded in 13 Transversal Competences (CT in Spanish). All of them are worked on and evaluated in all UPV degrees, whether undergraduate or graduate. Specifically, the "Specific Instrumental" transversal competence has been working for two years by a team of lecturers from the Department of Mechanical and Materials Engineering (DIMM in Spanish). Their objective is to develop an effective methodology to work on the acquisition and evaluation of this competence. The tool chosen to work with is ANSYS®, which is widely used in the field of mechanical engineering. This commercial software provides numerical solutions to complex problems using the Finite Element Method (FEM). The proposed methodology has been implemented during this year in three different subjects with a total of 335 students and is based on previous experience carried out in small groups last year. The objective is also to consolidate a procedure suitable for large groups without increasing lecturer's dedication time. After analysing the characteristics that were not entirely satisfactory, the new proposal seeks to improve them while maintaining the correct actions of the previous experience. Thus, laboratory training sessions and a different timed exercise for each student are kept. The most important changes affect the distribution of the worktime of the student and the assessable exercises. The number of evaluable exercises has been reduced to one, as well as the content and the test score. The proposed exercise consists of modelling a mechanical component and carrying out several tasks related to the mechanical study of a component. The correct completion of the different sections allows a numerical evaluation of the laboratory sessions and the suitability of the methodology. At the same time, the justification of the steps followed, and the adequacy of the strategies followed give the level reached in the ¿Specific Instrumental¿ transversal competence. The results reveal that students have achieved a greater degree of autonomy in managing the software. Furthermore, the new evaluation system discriminates the mastery with greater rigor, in the past there were no intermediate marks, the capability was achieved or not. Additionally, all the practical sessions have been adapted to the sanitary situation following an online format. This adaptation to the COVID scenario has provided the opportunity to introduce changes in the lecturing material that will be maintained in the next courses., Authors gratefully acknowledge the financial support of the Vicerrectorado de Estudios, Calidad y Acreditación, the Vicerrectorado de Recursos Digitales y Documentación of the Universitat Politècnica de València (Project PIME B/19-20/165 and Project PIME C/20-21/201) and the Instituto de Ciencias de la Educación of the Universitat Politècnica de València (EICE INTEGRAL).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

The use of podcasting for a hybrid flipped classroom

  • Marco-Detchart, Cédric
  • Taverner-Aparicio, Joaquín José|||0000-0002-5163-5335
  • Jordán, Jaume|||0000-0003-0400-9136
[EN] We are currently assisting a social paradigm change motivated by the incorporation, more and more accelerated, of new information technologies (e.g., social networks or content platforms) in our day-today life. The increased availability of online resources in a universal, diverse, and permanent way is modifying how we consume online information and content. This is especially true when it comes to children and teenagers. New generations are increasingly adapting to immediacy and communication through information technologies. Therefore, it is necessary to evolve the educational paradigm to adapt it to this new social reality. Future learning strategies should consider the latest models of social communication, adapting them to achieve learning objectives from the perspective of constructive alignment and the acquisition or improvement of transversal competencies. In this sense, there are currently several technologies that can be incorporated into the classroom. One of the emerging technologies is the podcast. Usually used for entertainment (e.g., stories, books, or radio talks), the podcast is becoming a tool for massive online content distribution. There exist many advantages to using podcasting for an educative purpose, as the production cost (in terms of time) is lower than recording a video. From a content consumer perspective, the main advantage is that an audio-only approach can be used/consumed everywhere and more easily than video media. Some educational podcasts are available online but generally tend to focus on learning languages or history. Outside these specific topics, their use in technology subjects is still residual and mainly focuses on interviews or long expositions. Moreover, in current proposals, the teacher is the one who produces the podcast, and therefore it is a one-way communication model (from the teacher to the students). On the other hand, one of the teaching innovation models that is being increasingly used is the flipped classroom. In the flipped classroom, students are the main protagonists in their learning. They must prepare the theoretical parts on their own, and the teacher serves as a guide during this learning process. In this paper, we propose using the podcast in the flipped classroom model, turning the podcast into a bidirectional tool in which students are both producers and receivers of learning. The proposal consists of dividing the class into small groups of students (2-4). Each group will record a podcast episode on a different conceptual part of the lesson. Group members will have to coordinate and share the activities of recording and searching for content for the podcast. This will encourage transversal skills related to communication and social skills. These podcasts will then be shared with the rest of the groups so that everyone can have direct and permanent access to the different sections of the lesson. Creativity will also be encouraged, allowing students to add the music or sound effects they consider necessary to enhance the explanation., The authors gratefully acknowledge the financial support of Consellería d'Innovació, Universitats, Ciencia i Societat Digital from Comunitat Valenciana and the European Social Fund (Investing In Your Future) (APOSTD/2021/227 and CIPROM/2021/077), the Spanish Ministry of Science (project PID2021-123673OB-C31) and the Research Services of Universitat Politècnica de València. Jaume Jordán is supported by grant IJC2020-045683-I funded by MCIN/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Evaluating the use of self-video teaching in a flipped classroom

  • Taverner-Aparicio, Joaquín José|||0000-0002-5163-5335
  • Jordán, Jaume|||0000-0003-0400-9136
  • Vos, Tanja Ernestina|||0000-0002-6003-9113
  • Marco-Detchart, Cédric
[EN] New generations are increasingly becoming more familiar with consuming audio-visual material through online platforms. Consequently, learning through IT-based tools is becoming more and more common. Nowadays, learning platforms (e.g., edX or W3Schools) or content platforms (e.g., YouTube) containing vast amounts of courses and video tutorials are becoming increasingly popular among students. The main advantage of online learning is that students can access the content from anywhere and whenever they want, being able to revisit the content to review concepts and improve their level of knowledge. In this way, learning based on a deep approach and self-learning is promoted since students are the ones who regulate their learning process by deciding how much time to dedicate and when to do it. Appropriately using this type of resource can become a very effective tool applied to a flipped classroom model. In the flipped classroom model, students are active learners since they are in charge of developing the lesson material both in class and at home. In this type of learning, the teacher assumes the role of guide assisting during the learning process. A standard methodology in this flipped classroom model consists of students preparing different parts of the course content and then explaining those parts to their classmates. In this way, students develop a sense of responsibility toward the rest of their classmates, creating an environment where they can recognise their shortcomings and take control of their learning to teach others. In addition, the acquisition of transversal communication skills is encouraged. With all this in mind, in this article, we describe a case study we are currently carrying out with students enrolled in the programming course at the Universitat Politècnica de València. Our proposal combines the flipped classroom model with access to online resources. In this first approach, we have proposed that the students record a video explaining a part of the lesson or how to solve at least two exercises step by step. The explanation must be done as if they were content creators, and their audience were beginner programmers. The students will upload the videos to a private YouTube channel that will only be accessible to their classmates. In the classroom, the teacher will encourage students to share their stories and experiences while learning, editing, and recording the videos. This proposal's main objective is to promote students' engagement in the learning process and offer them learning alternatives through online content with a closer language that they can access whenever they need it. To motivate participation, students and teachers will choose the three best videos from all the videos. The three winners will receive extra points in the evaluation of the course., The authors gratefully acknowledge the financial support of Consellería d'Innovació, Universitats, Ciencia i Societat Digital from Comunitat Valenciana and the European Social Fund (Investing In Your Future) (APOSTD/2021/227 and CIPROM/2021/077), the Spanish Ministry of Science (project PID2021-123673OB-C31) and the Research Services of Universitat Politècnica de València. Jaume Jordán is supported by grant IJC2020-045683-I funded by MCIN/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Linear and Nonlinear Correlations Between Surface and Invasive Atrial Activation Features in Catheter Ablation of Paroxysmal Atrial Fibrillation

  • Vraka, Aikaterini
  • Bertomeu-González, Vicente
  • Hornero, Fernando
  • Ravelli, Flavia
  • Alcaraz, Raúl
  • Rieta, J J|||0000-0002-3364-6380
[EN] P-waves are vastly used to assess the outcome of catheter ablation (CA) of atrial fibrillation (AF). It remains unknown, however, if coronary sinus (CS), the key reference structure in CA procedures, follows similar patterns. This study¿s objective is to detect any correlations between the behavior of P-waves and CS local activation waves (LAWs) with regard to CA procedure. Duration, amplitude, area and slope rate were studied in P-waves and LAWs of five-minute recordings from 29 patients undergoing paroxysmal AF CA. Normalization (N) due to heart rate (HR) fluctuations was performed. Pearson¿s correlation (PC) between CA-induced variations (¿) of P-waves and LAWs was calculated. Linear correlations between each P-wave/LAW were studied with PC and linear regression with 10¿fold cross-validation. Cross-quadratic sample entropy (CQSE) assessed nonlinear correlations. PC (¿ : ¿ < 52.27%, p = 0.015, P-wave/LAW: ¿ < 40.37%, p = 0.001) and linear regression analysis (R2 ¿ adj < 16.02%, p = 0.015 ) showed low/mediocre linear correlations. CQSE ( 0.8 ¿ 1.3) also suggested weak nonlinear relationships. P-waves and LAWs are poorly correlated and do not describe to the same degree the substrate modification after CA. It is possible that P-waves reflect the cumulative CA-induced modifications of various atrial sites, with CS being one of them but not the dominant., Research supported by grants DPI2017-83952-C3 from MINECO/AEI/FEDER UE, SBPLY/17/180501/000411 from JCCLM and AICO/2021/286 from GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Acoustic modelling of large aftertreatment devices with multimodal incident sound fields

  • F. D. Denia|||0000-0003-4536-8610
  • Sánchez-Orgaz, Eva María|||0000-0002-8864-3056
  • Martínez Casas, José|||0000-0001-5706-4951
  • Carballeira, Javier|||0000-0002-4179-8499
  • Baeza González, Luis Miguel|||0000-0002-3815-8706
[EN] The influence of multimodal incident sound fields on the acoustic behaviour of large aftertreatment devices (ATD) is analysed in detail. The mode matching method is applied to the compatibility conditions of the three-dimensional (3D) acoustic fields at the device geometric discontinuities, leading to the computation of the complex wave amplitudes in all the subdomains involved and the corresponding transmission loss (TL). To have a realistic model, 3D propagation must be considered in the inlet/outlet ducts and chambers, while 1D wave propagation has to be assumed along the small capillaries of the catalytic converter/particulate filter monoliths of the ATD; therefore, these monoliths can be replaced by plane wave four pole transfer matrices from an acoustical point of view [1]. On the other hand, for large ATD inlet ducts such as those found in heavy-duty and off-road engines, the usual models with plane incident wave excitation are not accurate since the onset of higher order incident modes in the inlet duct is expected for the frequency range of interest. Therefore, a TL variation is likely to occur depending on these modes, similar to the results found in large dissipative silencers [2]. Results are presented for three different multimodal incident sound field hypotheses [3]: equal modal amplitude (EMA), equal modal power (EMP) and equal modal energy density (EMED). A relevant influence on the sound attenuation is found for the test problems considered in the current investigation. References [1] Denia, F. D., Martínez-Casas, J., Carballeira, J., Nadal, E., Fuenmayor, F. J., Computational performance of analytical methods for the acoustic modelling of automotive exhaust devices incorporating monoliths. Journal of Computational and Applied Mathematics, 330: 995--1006, 2018. [2] Kirby, R., Lawrie, J. B., A point collocation approach to modelling large dissipative silencers. Journal of Sound and Vibration, 286: 313--339, 2005. [3] Mechel, F. P., Formulas of Acoustics. Berlin, Springer, 2008., The authors gratefully acknowledge Grants PID2020-112886RA-I00 and PID2020-118013RB-C21 funded by MCIN/AEI/10.13039/501100011033 and Project PROMETEO/2021/046 from Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Analysis of surface electromyographic parameters for the assessment of muscle fatigue during moderate exercises

  • Junquera-Godoy, Isabel|||0000-0002-6755-5962
  • Gomis-Tena Dolz, Julio|||0000-0002-1309-2368
  • Martínez-de-Juan, José L.|||0000-0001-9133-3123
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
  • Prats-Boluda, Gema|||0000-0002-9362-5055
[EN] Muscle fatigue is a neuromuscular phenomenon which prevents the muscles to generate the required force. Although there are multiple studies about detecting this condition with surface electromyography, this method has still some limitations. The objective of this study was to determine the viability of some biomarkers as early indicators of fatigue during moderate exercise. Eight healthy volunteers performed 2 dynamic exercises involving the flexo-extension of the knee lifting 2 and 4kg attached to the ankle. A bipolar electromyographic signal was recorded simultaneously from: Rectus Femoris, Vastus Lateralis and Biceps Femoris. Muscle activations were extracted by supervised automatic segmentation and their root mean square, bandwidth, entropy and spectral moment were calculated. The maximum of the normalized coefficient of the linear cross-correlation between each muscle pair were also computed as well as the slope throughout the execution of the exercise repetitions of all above mentioned parameters. Results from 2kg exercise did not reveal clear signs of fatigue. By contrast those from 4kg showed an increase of the root mean square and spectral moment ratio, and decrease of bandwidth, sample entropy and linear cross correlation coefficient, pointing out fatigue. In this study, it has been confirmed the viability of the cross-correlation technique as a possible new biomarker related to the first signs of muscle fatigue., This study was supported by the Agència Valenciana de la Innovació project "iSARC-GENETICS, Plataforma Inteligente para la Detección Temprana, Ayuda al Diagnóstico y Seguimiento de la Sarcopenia". (INNEST/2021/365)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Assessment of common information in surface electromyography recordings with adhesive electrodes and an intravaginal probe

  • Mira-Tomás, J. M.
  • Albaladejo-Belmonte, Mónica
  • Villa-Muñoz, P.
  • Nohales-Alfonso, F. J.
  • Alberola-Rubio, J.
  • Guijarro Estelles, Enrique|||0000-0003-0606-2352
  • Garcia-Casado, Javier|||0000-0003-1410-2721
[EN] Dysfunctions in pelvic floor muscles (PFM) are a highly prevalent group of pathologies which critically alter daily life activities. Surface electromyography (sEMG) of PFM has emerged as a potential evaluative tool but recordings are affected by interferences of nearby muscle groups. The aim of this study is to assess the association between internal and external sEMG signals in order to better identify the different PFM sources. Four monopolar and two bipolar signals were recorded from the perineum (external recordings), and two monopolar signals with an intravaginal probe in 32 women with vulvodynia.. Cross correlation (CC) and normalized mutual information (NMI) were computed between signal pairs to assess their common information. External monopolar electrodes showed high CC (82 %) and NMI (19 %) among them, probably due to common mode interferences and volume conduction. External monopolar signals on posterior PFM have relevant common information with probe signals of the same side (CC: 55 %, NMI:6.5 %), suggesting that deep PFM activity could be monitored without using intravaginal probes, which are painful for some patients. Little common information was found between intravaginal probe and external bipolar signals, suggesting that deep and surface activity can be assessed separately with these recordings set-ups. These findings can be relevant for the recording and interpretation of sEMG signals when assesing PFM electrophysilogical condition in the clinical management of PFM disorders, This study was funded by Generalitat Valenciana in Programa para la promoción de I+D+i ACIF/2021/012, AICO/2021/126; and by private contracts from Merz Pharmaceuticals GmbH S.L.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Caracterización de prestaciones de aplicaciones paralelas de dispositivos móviles

  • Navarro-Edo, Marta|||0000-0002-4334-460X
  • Pons-Escat, Lucía|||0000-0002-4582-7744
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Pons Terol, Julio|||0000-0002-5654-6753
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Lorente, Vicent
[ES] Los dispositivos m¿oviles, como smartphones o tabletas, est¿an presentes en los distintos ¿ambitos de nuestra vida cotidiana. Recientemente, estos dispositivos m¿oviles han comenzado a incorporar procesadores SMT, donde las interferencias entre aplicaciones son m¿as intensas porque tambi¿en hay compartici¿on de recursos dentro del n¿ucleo. Este trabajo analiza la interferencia que hay en las aplicaciones paralelas entre los hilos o procesos que ha creado.El hecho de utilizar cargas paralelas supondr¿¿a nuevos desaf¿¿os al planificador. En este trabajo se realiza una caracterizaci¿on de las aplicaciones paralelas, como paso preliminar al dise¿no de un planificador para este tipo de aplicaciones, analizando el comportamiento din¿amico de los hilos de las aplicaciones paralelas analizadas. Se ha analizado c¿omo afecta el n¿umero de hilos de las aplicaciones a las prestaciones y cu¿anto afecta a las prestaciones que los hilos de la aplicaci¿on compartan los recursos de todo el sistema, incluidos los del n¿ucleo f¿¿sico. De esta manera, un planificador podr¿¿a basar su gesti¿on en este estudio para mejorar las prestaciones. Se ha comprobado que las aplicaciones multihilo/multiproceso presentan una amplia variedad de categor¿¿as y que algunas aplicaciones apenas presentan p¿erdidas de prestaciones cuando se ejecutan en modo SMT, a pesar de ejecutarse en la mitad de los n¿ucleos f¿¿sicos, es decir, son SMT amigables., Este trabajo ha sido financiado por los fondos FEDER europeos bajo el proyecto RTI2018-098156-BC51 y por la Generalitat Valenciana bajo la ayuda AICO/2021/266.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

ECG Quality Assessment via Deep Learning and Data Augmentation

  • Huerta, Álvaro
  • Martínez-Rodrigo, Arturo
  • Alcaraz, Raúl
  • Rieta, J J|||0000-0002-3364-6380
[EN] Quality assessment of ECG signals acquired with wearable devices is essential to avoid misdiagnosis of some cardiac disorders. For that purpose, novel deep learning algorithms have been recently proposed. However, training of these methods require large amount of data and public databases with annotated ECG samples are limited. Hence, the present work aims at validating the usefulness of a well-known data augmentation approach in this context of ECG quality assessment. Precisely, classification between high- and low-quality ECG excerpts achieved by a common convolutional neural network (CNN) trained on two databases has been compared. On the one hand, 2,000 5 second-length ECG excerpts were initially selected from a freely available database. Half of the segments were extracted from noisy ECG recordings and the other half from high-quality signals. On the other hand, using a data augmentation approach based on time-scale modification, noise addition, and pitch shifting of the original noisy ECG experts, 1,000 additional low-quality intervals were generated. These surrogate noisy signals and the original highquality ones formed the second dataset. The results for both cases were compared using a McNemar test and no statistically significant differences were noticed, thus suggesting that the synthesized noisy signals could be used for reliable training of CNN-based ECG quality indices.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Language Task Difficulty Prediction through LLM-Annotated Meta-Features

  • Moros-Daval, Yael
  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Hernández-Orallo, José|||0000-0001-9746-7632
[EN] Assessing the capabilities of large language models (LLMs) is increasingly challenging due to their generality and uneven task performance. Often, we do not know how much of the success or failure on a particular task is due to the `loading¿ of the language elements in the task, such as narrative understanding, or some other intrinsic (non-linguistic) components, such as domain-specific common sense or reasoning capabilities. Understanding what tasks are most loaded on language and determine the predictability of LLMs on these tasks is crucial for improving benchmarks, designing better LLMs, and ensuring their safe deployment. We present an innovative methodology that uses LLMs to annotate linguistic metafeatures , allowing us to predict task difficulty and understand linguistic loadings more accurately than traditional readability scores. Using GPT-4 for automated annotation, we show strong predictability for a variety of tasks and language models (e.g., MMLU with R2 from 0.68 to 0.83), but observe limited predictability for other tasks (e.g., LSAT with R2 of -0.07)., We acknowledge support from: Grant for Master Studies funded by ValgrAI Valencian Graduate School and Research Network for Artificial Intelligence and Generalitat Valenciana; FISCALTICS (I+D+i PID2022-140110OA-I00), granted by MICIU/AEI/10.13039/ 501100011033 and by ERDF, EU; CIPROM/2022/6 (FASSLOW) and IDIFEDER/2021/05 (CLUSTERIA) funded by Generalitat Valenciana; the EC H2020-EU grant agreement No. 952215 (TAILOR); US DARPA HR00112120007 (RECoG-AI) and Spanish grant PID2021-122830OB-C42 (SFERA) funded by MCIN/AEI/10.13039/501100011033 and ERDF.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A Novel Method to Decouple Temperature and Strain Using a Customized Femtosecond Laser-inscribed Superstructure Fiber Bragg Grating

  • Sanipatin-Urquizo, Bryan David|||0000-0003-4042-2286
  • Maldonado-Hurtado, Daniel Gustavo|||0000-0001-8585-0271
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] This paper introduces a novel technique to simultaneously measure temperature and strain using a single 5 mm femtosecond laser-inscribed superstructure FBG. Analyzing resonance distances, it allows distinguishing and complements the contributions of strain and temperature, improving measurements in sensing applications., This work is partially supported by the I+D+I projects SYNERGY PID2020-118310RB-I00 and INSTILL PID2020 120071RJ I00 funded by MCIN/AEI/10.13039/501100011033. Also, by the Generalitat Valenciana, the PROMETEO 2021/015 Research Excellency Award, the IDIFEDER/2020/032, as well as IDIFEDER/2021/050 GV A Infraestructura. D and PAID-10-22 de la Universitat Politècnica de València. Maldonado- Hurtado is supported by a scholarship PRE2018-085654, funded by MCIN/AEI/10.13039/501100011033, and ESF Investing in your future. . B. Sanipatin is supported by the Generalitat Valenciana, the PROMETEO 2021/015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

El portafolio como herramienta para la integración de los Objetivos de Desarrollo Sostenible en asignaturas del Área de Máquinas y Motores Térmicos

  • Piqueras, P.|||0000-0002-3767-0839
  • De La Morena, Joaquín|||0000-0003-0208-508X
  • Bares-Moreno, Pau|||0000-0001-9672-0819
  • Sanchis, Enrique José|||0000-0002-6856-8992
[ES] En este trabajo se muestran los resultados obtenidos de aplicar la herramienta del portafolio en asignaturas del Área de Máquinas y Motores Térmicos del Grado en Ingeniería Aeroespacial de la UPV. Se pretende mejorar los resultados en actividades de Estudio de Caso realizadas en cada asignatura, relacionadas entre sí, dando a conocer al alumnado los Objetivos de Desarrollo Sostenible de la ONU relacionados con la propulsión aeronáutica., [EN] This work shows the results obtained from applying the portfolio tool in subjects belonging to the Thermal Machines and Engines Area taught in the Aerospace Engineering Degree at the UPV. It is intended to improve the results in Case Study activities carried out in each subject and related to each other to make students aware of the UN Sustainable Development Goals related to aeronautical propulsion., Este trabajo ha sido parcialmente financiado por la Universitat Politècnica de València a través del proyecto PIME 20-21/204.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

PANES(Parejas afiNES): Estrategia de mejora de prestaciones en procesadores SMT de ARM

  • Navarro-Edo, Marta|||0000-0002-4334-460X
  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[ES] Este artículo presenta PANES, una estrategia sencilla que asigna dinámicamente hilos a núcleos de un procesador SMT en función de su comportamiento dinámico en tiempo de ejecución., Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovaci¿on junto al FEDER europeo a trav¿es de los proyectos PID2021-123627OBC51, TED2021-130233B-C3 y AICO/2021/266. Marta Navarro tiene la beca Subvenciones para la contrataci¿on de personal investigador predoctoral de la Generalitat Valenciana (ACIF2022). Josu¿e Feliu cuenta con el apoyo del contrato RYC2021-030862-I financiado por MCIN/AEI /10.13039/501100011033 y por la Uni¿on Europea NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Stratus: A Hardware/Software Infrastructure for Controlled Cloud Research

  • Pons-Escat, Lucía|||0000-0002-4582-7744
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Pons Terol, Julio|||0000-0002-5654-6753
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
  • Huang, Chaoyi
[EN] Cloud systems deploy a wide variety of shared resources and host a large number of tenant applications. To perform cloud research, a small experimental platform is commonly used, which hides the huge system complexity and provides flexibility. Despite being simpler, this platform should include the main cloud system components (hardware and software) to provide representative results. A wide set of platforms have spread in recent years; however, most of them only include a major cloud component or lack the deployment of virtual machines (VMs) to provide isolation. This paper presents Stratus, an experimental platform that is currently being used to carry out cloud research. To the best of our knowledge, Stratus is the only platform that jointly provides three main features: uses VMs to isolate tenant applications, deploys the three types of cloud nodes (server, client, and storage), and manages all main shared system resources (CPUs, LLC space, memory, network, and disk bandwidth). Moreover, Stratus implements a software manager to ease the research and aid the design of QoS-aware policies. The manager integrates three main functionalities: management and control of the execution of VMs and running applications, monitoring of hardware performance counters and system resource utilization, and partitioning of the main shared system resources by using technologies available in commercial processors., This work has been partially supported by Huawei Cloud, by the Spanish Ministerio de Universidades under the grant FPU18/01948, and by the Spanish Ministerio de Ciencia e Innovacion and European ERDF under grants PID2021- 123627OB-C51 and TED2021-130233B-C32, and by Generalitat Valenciana under Grant AICO/2021/266.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Alternative Time-Domain P-wave Analysis for Precise Information on Substrate Alteration After Pulmonary Vein Isolation for Atrial Fibrillation

  • Vraka, Aikaterini
  • Bertomeu-González, Vicente
  • Hornero, Fernando
  • Sörnmo, Leif
  • Alcaraz, Raúl
  • Rieta, J J|||0000-0002-3364-6380
[EN] While P-wave duration (PWD) is primarily employed to observe the atrial substrate alterations after pulmonary vein isolation (PVI) on atrial fibrillation (AF) patients, the acquired information corresponds to the entire atria. Left (LA) and right atrium (RA), though, may be differently affected by PVI, implying the need for different after-PVI handling. In order to clarify this assumption, five-minute lead II recordings from 29 paroxysmal AF patients undergoing first-ever PVI were recruited before and after PVI. PWD was analyzed integrally and in parts, with the first part (PWD1) from the onset to the peak corresponding to RA and the second part (PWD2) to LA depolarization. Time from P-wave onset or offset to the R peak were also calculated (P-on - R and P-off - R, respectively). Normalization (N) to mitigate heart-rate effect was applied. Results before and after PVI were compared with Mann-Whitney U-test (MWU). Median values and variations due to PVI were calculated for all features and compared between PWD and the remaining features via Pearson correlation. After PVI, PWD (-9.84%, p = 0.0085, N : -17.96%, p = 0.0442) and PWD2 (-22.03% p = 0.0250, N : -27.77%; p = 0.0268) were significantly decreased. PWD1 did not shorten significantly (up to -8.96%, p > 0.05 at either cases). PWD - PWD1 (rho > 74.5%; p < 0.0001) showed higher correlation than PWD - PWD2 (rho > 41.9%; p < 0.0001) in before and after PVI analysis but not for PVI-related variation (rho(PWD - PWD1) = 54.0%; p = 0.0114 and rho(PWD - PWD2) = 61.4%; p = 0.0031). While RA depolarization time is more in line with PWD analysis, the effect of PVI in PWD is more coherent with LA's findings. Additionally, PWD shortening is only observed in the LA. Therefore, LA is crucial for the assessment of the atrial substrate alteration after PVI and its analysis should be considered by future studies., Research supported by grants DPI2017-83952-C3 from MINECO/AEI/FEDER UE, SBPLY/17/180501/000411 from JCCLM and AICO/2021/286 from GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Learning Sustainable Development Goals in chemistry laboratory practicals

  • Lull, Cristina|||0000-0001-9270-2365
  • Lidón, Antonio|||0000-0002-0455-4348
  • López-Paz, José Luis|||0000-0003-4015-4357
  • Bautista, Inmaculada
[EN] Our society is heading towards sustainable development. At the core of the 2030 Agenda for Sustainable Development are 17 Sustainable Development Goals (SDGs). SDGs describe major development challenges for humanity (e.g. end of poverty and hunger, quality education, ensure availability and sustainable management of water, the achievement of sustainable consumption and production patterns, combat climate change and its impacts, build peaceful and inclusive societies). For the SDGs to be reached, everyone needs to do their part. By changing our habits and making choices that have less harmful effects on the environment, we have the power to build a more sustainable world. Universities can play a relevant role in achieving the SDGs, since they are important agents for the integral development of future citizens, equipping the next generations with the skills, knowledge and motivation to address the challenges and opportunities of sustainability in increasingly complex and global contexts. Chemistry laboratories at Universities can play an essential role in helping society to achieve the SDGs. Students can understand and minimize the environmental impact when working in the laboratory and become aware of their role in achieving the SDGs. In order to check their knowledge of SDGs, the first-year students passed a test at the beginning of the practicals and another test at the end of them. The second test was answered by 75% of the students, and the results indicated that all of them known the main purpose of SDGs and that each can contribute to achieving the SDGs. In a four-point Likert scale, 85% of the students indicated that after finishing the chemistry practicals course, their awareness about the importance of properly handling chemical residues had increased to a great extent and 15% somewhat. In addition, after the laboratory sessions, 67.5% of the students answered that had considered the need to save tap and distilled water to a great extent during those sessions, and 32.5% somewhat. Finally, 82.5% of the students answered that they were willing to get involved in achieving the SDGs at the University through the actions prepared by teachers. Some students pointed out that the information provided in the laboratory sessions was their first approximation to the SDGs and expressed that is crucial the University's support for the implementation of the SDGs in the disciplines of the curriculum., This work has been sponsored by UPV's project PIME 20-21/224 Moving towards the Sustainable Development Goals at UPV: poliODS Project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Diseño de Políticas de Asignación de Hilos en Procesadores ARM SMT Basadas en Categorías

  • Navarro-Edo, Marta|||0000-0002-4334-460X
  • Feliu-Pérez, Josué|||0000-0003-3017-4266
  • Petit Martí, Salvador Vicente|||0000-0003-2426-4134
  • Gómez Requena, María Engracia|||0000-0003-1466-4118
  • Sahuquillo Borrás, Julio|||0000-0001-8630-4846
[ES] Los servidores HPC modernos integran procesadores simultaneous multithreading (SMT). Estos procesadores comparten los recursos internos del nucleo entre diversos hilos de ejecucion, lo cual les permite alcanzar mayores prestaciones. Sin embargo, esto introduce interferencias entre los hilos que se ejecutan en el mismo nucleo. Esta interferencia intranucleo pone en peligro la mejora de prestaciones y puede aumentar el tiempo de ejecucion. Las pol¿ticas de asignacion de hilos a nucleos (Thread-to-Core Allocation, T2C ) abordan este problema en dos pasos: (i) construir una performance stack por aplicacion usando contadores hardware y (ii) predecir las parejas afines de aplicaciones y asignarlas al mismo nucleo. Este art¿culo presenta la Instructions and Stall Cycles (ISC) stack, un nuevo enfoque diseñado para procesadores ARM resolviendo las limitaciones de la PMU de estos procesadores. Estas stacks de ISC se utilizan en un modelo de prediccion para determinar las parejas afines que ayuden a mejorar las prestaciones. Este trabajo presenta el diseño y analisis de SYNPA, una familia de pol¿ticas T2C guiada por modelos de prediccion de prestaciones basados en stacks de ICS. Los experimentos demuestran que SYNPA4, la mejor variante, reduce el tiempo de ejecucion en un 38 % frente a Linux, logrando 3× las mejoras de pol¿ticas del estado del arte. SYNPA4 se puede aplicar a otros procesadores SMT siguiendo la metodolog¿a presentada en este trabajo., Este trabajo ha sido parcialmente financiado por por el Ministerio de Ciencia e Innovacion junto al FEDER europeo a traves de los proyectos PID2021-123627OB-C51 y TED2021-130233B-C32. Marta Navarro tiene la beca de Subvenciones para la contratacion de personal investigador predoctoral by CIACIF/2021/413. Josue Feliu cuenta con el apoyo del contrato RYC2021-030862-I financiado por MCIN/AEI /10.13039/501100011033 y por la Union Europea NextGenerationEU/PRTR.