Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 1998
Encontrada(s) 20 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Nanoassemblies for oral protein delivery — The case of monoclonals for inflammatory bowel disease

  • López Estévez, Ana M.
  • Portela, María G.
  • Piñeiro Alonso, Laura
  • Castillo González, Raquel
  • Sancho Temiño, Lucía
  • Gómez Lado, Noemí
  • Codesido, Jessica
  • García Otero, Xurxo
  • Medel, María
  • Vicent, María J.
  • Castellanos, Milagros
  • Aguiar, Pablo
  • Fernández Messina, Lola María
  • Fernández Aceñero, María Jesús
  • Cruz Adalia, Aranzazu
  • Alonso, María José
Biological drugs such as monoclonal antibodies (mAbs) or peptides are the preferred therapeutic approach for the treatment of chronic diseases such as inflammatory bowel disease (IBD) or diabetes. Unfortunately, the necessity of their parenteral administration and poor access to their targets have limited their full exploitation. Nanotechnology has been explored for the oral administration of biologicals, however, the nanocarriers reported so far have shown limited translational value. The objective of this work has been to design a new nanocarrier for the oral administration of therapeutic proteins with a translational potential. We chose as cargos, insulin and two clinically relevant mAbs, Bevacizumab (BVZ, anti-VEGF-A mAb) and Adalimumab (anti-Tumor Necrosis Factor (TNF) mAb). These macromolecules were assembled with amphiphilic biodegradable polymers, either positively charged (based on octaarginine-lauric r8C12) or negatively charged (polyglutamic acid derivatized with myristic acid, PGAC14) with the intention to assess their potential to facilitate the targeted delivery of the selected proteins. After a screening of a library of compositions, nanoformulations named as nanoassemblies (NAs) exhibiting singular features were selected, namely (i) a ultra-small and unimodal size of 50 nm and negative to neutral surface charge, (ii) a high drug loading capacity (>10 %, w/w), (iii) the ability to protect the cargo in simulated GI fluids, and (iv) the capacity to interact with the intestinal epithelium. In vivo PET/MRI biodistribution profile indicates that NAs consisting of BVZ-r8C12 are significantly retained in the colon as compared to free BVZ. The biodistribution analysis in a rat colitis model revealed that the inflamed conditions enhanced significantly the retention pattern of the NAs. On the other hand, a specific prototype containing anti-TNF (PEGylated NAs of anti-TNF mAb and PGAC14) were able to reduce the production of pro-inflammatory cytokines and decrease the colonic inflammation. Briefly, we present a new oral protein delivery platform and show the potential of specific prototypes for treating local inflammation in intestinal tissues. We also realize that to assess their potential further we need to fully understand their mechanism of action.
Docta Complutense
Publicación Artículo científico (JournalArticle)

BET inhibitor nanotherapy halts kidney damage and reduces chronic kidney disease progression after ischemia-reperfusion injury

  • Saiz, M. L.
  • Lozano-Chamizo, L.
  • Florez, A. B.
  • Marciello, Marzia
  • Diaz-Bulnes, P.
  • Corte-Iglesias, V.
  • Bernet, C. R.
  • Rodrigues-Diez, R. R.
  • Martin-Martin, C.
  • Rodriguez-Santamaria, M.
  • Fernandez-Vega, I.
  • Rodriguez, R. M.
  • Diaz-Corte, C.
  • Suarez-Alvarez, B.
  • Filice, Marco
  • Lopez-Larrea, C.
Targeting epigenetic mechanisms has emerged as a potential therapeutic approach for the treatment of kidney diseases. Specifically, inhibiting the bromodomain and extra-terminal (BET) domain proteins using the small molecule inhibitor JQ1 has shown promise in preclinical models of acute kidney injury (AKI) and chronic kidney disease (CKD). However, its clinical translation faces challenges due to issues with poor pharmacokinetics and side effects. Here, we developed engineered liposomes loaded with JQ1 with the aim of enhancing kidney drug delivery and reducing the required minimum effective dose by leveraging cargo protection. These liposomes efficiently encapsulated JQ1 in both the membrane and core, demonstrating superior therapeutic efficacy compared to freely delivered JQ1 in a mouse model of kidney ischemia-reperfusion injury. JQ1-loaded liposomes (JQ1-NPs) effectively targeted the kidneys and only one administration, one-hour after injury, was enough to decrease the immune cell (neutrophils and monocytes) infiltration to the kidney—an early and pivotal step to prevent damage progression. By inhibiting BRD4, JQ1-NPs suppress the transcription of pro-inflammatory genes, such as cytokines (il-6) and chemokines (ccl2, ccl5). This success not only improved early the kidney function, as evidenced by decreased serum levels of BUN and creatinine in JQ1-NPs-treated mice, along with reduced tissue expression of the damage marker, NGAL, but also halted the production of extracellular matrix proteins (Fsp-1, Fn-1, α-SMA and Col1a1) and the fibrosis development. In summary, this work presents a promising nanotherapeutic strategy for AKI treatment and its progression and provides new insights into renal drug delivery.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Stabilization of Floating Wind Turbines: Experimental Insights into Moonpool Dynamics

  • Esteban San Román, Segundo
  • Muñoz-Palomeque, Eduardo
  • Aboutalebi, Payam
  • Santos Peñas, Matilde
This article presents a series of experimental investigations conducted on small-scale floating wind turbine prototypes de-veloped by Universidad Complutense de Madrid (UCM) and barge-type platforms equipped with moonpools designed by theUniversidad del Pa ́ıs Vasco (UPV/EHU). The primary focus is on characterizing and identifying the natural dynamics of a barge-type floating wind turbine, moored by four catenary lines. A comparative analysis is carried out to evaluate the platform’sdynamic response under varying moonpool configurations—namely, open, closed, and passively or actively controlled oscillat-ing states. Furthermore, the potential of a gyroscopic actuator to mitigate platform oscillations and enhance system stability isexperimentally assessed. The results provide valuable insights into the role of internal fluid damping mechanisms and activecontrol strategies in improving the dynamic behavior of floating offshore wind systems.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental observation of higher-order anapoles in individual silicon disks under in-plane illumination

  • Díaz-Escobar, Evelyn
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Barreda-Gómez, Ángela Inmaculada
[EN] Anapole states¿characterized by a strong suppression of far-field scattering¿naturally arise in high-index nanoparticles as a result of the interference between certain multipolar moments. Recently, the first-order electric anapole, resulting from the interference between the electric and toroidal dipoles, was characterized under in-plane illumination as required in on-chip photonics. Here, we go a step further and report on the observation of higher-order (magnetic and second-order electric) anapole states in individual silicon disks under in-plane illumination. To do so, we increase the disk dimensions (radius and thickness) so that such anapoles occur at telecom wavelengths. Experiments show dips in the far-field scattering perpendicular to the disk plane at the expected wavelengths and the selected polarizations, which we interpret as a signature of high-order anapoles. Some differences between normal and in-plane excitation are discussed, in particular, the non-cancelation of the sum of the Cartesian electric and toroidal moments for in-plane incidence. Our results pave the way toward the use of different anapole states in photonic integrated circuits either on silicon or other high-index dielectric materials., This work was supported by Generalitat Valenciana under Grant No. GRISOLIAP/2018/164, the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) through the International Research Training Group (IRTG) 2675 "Meta-ACTIVE," Project No. 437527638, and Generalitat Valenciana (Grant Nos. PROMETEO/2019/123, IDIFEDER/2020/041, and IDIFEDER/2021/061).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ficin-Cyclodextrin-Based Docking Nanoarchitectonics of Self-Propelled Nanomotors for Bacterial Biofilm Eradication

  • Ziemyte, Migle
  • Diez-Sánchez, Paula
  • Ferrer, María D.
  • Mira, Alex
  • Escudero-Noguera, Andrea|||0000-0003-2670-6127
  • Murguía, Jose R.|||0000-0001-9364-4603
  • Martí-Centelles, Vicente|||0000-0002-9142-9392
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
[EN] Development of bioinspired nanomotors showing effective propulsion and cargo delivery capabilities has attracted much attention in the last few years due to their potential use in biomedical applications. However, implementation of this tech-nology in realistic settings is still a barely explored field. Herein, we report the design and application of a multifunctional gated Janus platinum-mesoporous silica nanomotor constituted of a propelling element (platinum nanodendrites) and a drug-loaded nano-container (mesoporous silica nanoparticle) capped with ficin enzyme modified with beta-cyclodextrins (beta-CD). The engineered nanomotor is designed to effectively disrupt bacterial biofilms via H2O2-induced self-propelled motion, ficin hydrolysis of the extracellular polymeric matrix (EPS) of the biofilm, and controlled pH-triggered cargo (vancomycin) delivery. The effective synergic antimicrobial activity of the nanomotor is demonstrated in the elimination of Staphylococcus aureus biofilms. The nanomotor achieves 82% of EPS biomass disruption and a 96% reduction in cell viability, which contrasts with a remarkably lower reduction in biofilm elimination when the components of the nanomotors are used separately at the same concentrations. Such a large reduction in biofilm biomass in S. aureus has never been achieved previously by any conventional therapy. The strategy proposed suggests that engineered nanomotors have great potential for the elimination of biofilms., The authors acknowledge financial support from Project CIPROM/2021/007 from the Generalitat Valenciana. This research was also supported by projects PID2021-126304OB-C41 and PID2021-128141OB-C22 funded by MCIN/AEI/10.13039/501100011033/ and by the European Regional Development Fund - A way of doing Europe. This study was also part of the Advanced Materials Program (MFA/2022/053) supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. This research was also funded by Universitat Politecnica de Valencia and the FISABIO Foundation, NANO-DRILL Project (UGP-19-384), and NANODONT Project (UPV-FISABIO-2020-B14). The authors gratefully acknowledge the support of the European Research Council (ERC) via the Advanced Grant (101052997, EDISON). Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or European Research Council . Neither the European Union nor the granting authority can be held responsible for them. M.Z. thanks for her FPU Ph.D. scholarship by the Spanish government (FPU17/01302). A.E. is also grateful for her Ph.D. grant from the Generalitat Valenciana (ACIF/2018/110). P.D. thanks Instituto de Salud Carlos III and the European Social Fund for financial support "Sara Borrell" (CD20/00120). V.M-C. acknowledges financial support from Project CIDE-GENT/2020/031, funded by Generalitat Valenciana. Scheme 1, (top) and Figure 3a were created with BioRender.com.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of virtual running with exercise on functionality in pre-frail and frail elderly people: randomized clinical trial

  • Mollà-Casanova, Sara
  • Muñoz-Gómez, Elena
  • Sempere-Rubio, Núria
  • Inglés, Marta
  • Aguilar-Rodríguez, Marta
  • Lopez Pascual, Juan
  • Serra Añó, Pilar
  • Page Del Pozo, Alvaro Felipe|||0000-0002-5432-310X
[EN] Background Virtual mirror therapies could increase the results of exercise, since the mirror neuron system produces an activation of motor execution cortical areas by observing actions performed by others. In this way, pre-frail and frail people could use this system to reach an exercise capacity threshold and obtain health benefits. Aim The aim of this study is to evaluate the effects of a virtual running (VR) treatment combined with specific physical gait exercise (PE) compared to placebo VR treatment combined with PE on functionality, pain, and muscular tone in pre-frail and frail older persons. Methods A single blinded, two-arm, randomised controlled trial design was employed. Thirty-eight participants were divided into two intervention arms: Experimental Intervention (EI) group, in which VR and gait-specific physical exercises were administered and Control Intervention (CI) group, in which a placebo virtual gait and the same exercise programme was administered. Functionality, pain, and tone were assessed. Results EI group improved in aerobic capacity, functional lower-limb strength, reaction time, and pain, while CI group remained the same. Regarding static balance and muscle tone, no differences were found for either group. Further analysis is needed to asses VR effectiveness for improving gait, stand-up and sit-down performance and velocity. Conclusions Virtual running therapy appears to enhance capacities related with voluntary movements (i.e., aerobic capacity, functional lower-limb strength, and reaction time) and reduce pain., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work was supported by La Generalitat Valenciana, Conselleria d'Innovació, Universitats, Ciència i Societat (CIAICO/2021/215); and by La Universitat de València (INV19-01-13-07).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Histological interpretation of spitzoid tumours: an extensive machine learning-based concordance analysis for improving decision making

  • Mosquera-Zamudio, Andrés
  • Launet, Laetitia Mariana
  • Wiedemeyer, Katharina
  • López-Takegami, Juan C.
  • Palma, Luis F.
  • Undersrud, Erling
  • Janssen, Emilius
  • Brenn, Thomas
  • Monteagudo, Carlos
  • Colomer, Adrián|||0000-0002-7616-6029
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
[EN] The histopathological classification of melanocytic tumours with spitzoid features remains a challenging task. We confront the complexities involved in the histological classification of these tumours by proposing machine learning (ML) algorithms that objectively categorise the most relevant features in order of importance. The data set comprises 122 tumours (39 benign, 44 atypical and 39 malignant) from four different countries. BRAF and NRAS mutation status was evaluated in 51. Analysis of variance score was performed to rank 22 clinicopathological variables. The Gaussian naive Bayes algorithm achieved in distinguishing Spitz naevus from malignant spitzoid tumours with an accuracy of 0.95 and kappa score of 0.87, utilising the 12 most important variables. For benign versus non-benign Spitz tumours, the test reached a kappa score of 0.88 using the 13 highest-scored features. Furthermore, for the atypical Spitz tumours (AST) versus Spitz melanoma comparison, the logistic regression algorithm achieved a kappa value of 0.66 and an accuracy rate of 0.85. When the three categories were compared most AST were classified as melanoma, because of the similarities on histological features between the two groups. Our results show promise in supporting the histological classification of these tumours in clinical practice, and provide valuable insight into the use of ML to improve the accuracy and objectivity of this process while minimising interobserver variability. These proposed algorithms represent a potential solution to the lack of a clear threshold for the Spitz/spitzoid tumour classification, and its high accuracy supports its usefulness as a helpful tool to improve diagnostic decision-making.; Our machine learning models improve histopathological diagnostic decision-making, ranking the importance of the histological variables for the classification of Spitz and spitzoid tumours. image, This work has received funding from Horizon 2020, the European Commission's Framework Programme for Research and Innovation, under the grant agreement no. 860627 (CLARIFY), PI20/00094, Instituto de Salud Carlos III, FEDER European Funds and INNEST/2021/321 (SAMUEL). The work of A.C. has been supported by the ValgrAI-Valencian Graduate School and Research Network for Artificial Intelligence and Generalitat Valenciana and Universitat Politecnica de Valencia (PAID-PD-22).The material from Norway has been collected as part of the project 'Pathology services in the Western Norway Health Region-a centre for applied digitisation' which is financed through a strategic investment from the Western Norway Health Authority.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Acoustic Holograms for Bilateral Blood-Brain Barrier Opening in a Mouse Model

  • Jiménez-Gambín, Sergio
  • Pouliopoulos, Antonios N.
  • Konofagou, Elisa E.
  • Jimenez, Noe|||0000-0002-6539-670X
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] Transcranial focused ultrasound (FUS) in conjunction with circulating microbubbles injection is the sole non-invasive technique that temporally and locally opens the blood-brain barrier (BBB), allowing targeted drug delivery into the central nervous system (CNS). However, single-element FUS technologies do not allow the simultaneous targeting of several brain structures with high-resolution, and multi-element devices are required to compensate the aberrations introduced by the skull. In this work, we present the first preclinical application of acoustic holograms to perform a bilateral BBB opening in two mirrored regions in mice. The system consisted of a single-element focused transducer working at 1.68 MHz, coupled to a 3D-printed acoustic hologram designed to produce two symmetric foci in anesthetized mice in vivo and, simultaneously, compensate the aberrations of the wavefront caused by the skull bones. T1-weighed MR images showed gadolinium extravasation at two symmetric quasi-spherical focal spots. By encoding time-reversed fields, holograms are capable of focusing acoustic energy with a resolution near the diffraction limit at multiple spots inside the skull of small preclinical animals. This work demonstrates the feasibility of hologram-assisted BBB opening for low-cost and highly-localized targeted drug delivery in the CNS in symmetric regions of separate hemispheres., This work was supported in part by the Spanish Ministry of Science, Innovation, and Universities (MICINN) through Grants "Juan de la Cierva -Incorporacion" IJC2018-037897-I, and PID2019-111436RB-C22, in part by the Agencia Valenciana de la Innovacio through Grants INNVAL10/19/016, INNCON/2021/8, and INNVA1/2020/92, in part by Generalitat Valenciana through Grants ACIF/2017/045, AICO/2020/268, and BEFPI/2019/075, and in part by the National Institutes of Health through Grants 5R01EB009041 and 5R01AG038961. Action co-financed by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana (IDIFEDER/2018/022 and IDIFEDER/2021/004)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Validation of an imageless electrocardiographic imaging technique for the non-invasive mapping of regular atrial tachyarrhythmias

  • Reventós-Presmanes, Jana
  • Cano-Cabañero, Andrea
  • Invers-Rubio, Eric
  • Pellicer-Sendra, Berta
  • Serrano-Campaner, Jaume
  • Zacur, Ernesto
  • Althoff, Till F
  • Hernández-Romero, Ismael
  • Borràs, Roger
  • Regany-Closa, Mariona
  • Arbelo, Elena
  • Guasch, Eduard
  • Tolosana, Jose María
  • Porta-Sánchez, Andreu
  • Herrero-Martín, Clara|||0000-0001-5053-296X
  • Andreu M. Climent|||0000-0002-7260-8811
  • Guillem Sánchez, María Salud|||0000-0001-5660-3693
[EN] This study validates the clinical performance of an imageless ECGi system for the characterization of regular atrial tachyarrhythmias. Its ability to provide rapid, full-chamber activation maps from a single beat may make it a potential solution for mapping transient arrhythmias or rhythm changes during ablation procedures., This project has been funded by grants PID2023-149812OB-I00, DIN2024-013365, PTQ2023-013018, PTQ2022-012632, RYC2018-024346-I, CNS2022-135512, and CPP2023-010504 funded by Ministerio de Ciencia, Innovacion y Universidades MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/Plan de Recuperacion, Transformacion y Resiliencia. This project has been funded by Generalitat Valenciana by grants ACIF/2021/205 and CIAICO/2022/020 and by European Social Fund Investing in Your Future. This project also received funding from European Institute of Innovation and Technology (EIT Health) (activity codes 220385, 230129, and 250027). Additionally, this work was supported by a research grant from Instituto de Salud Carlos III, which is co-funded by the European Union (grant PI22/00441). J.-B.G. acknowledges support from the grants 'Contractes d'Investigacio Avancada Fundacio BBVA' - Hospital Clinic Barcelona Joan Rodes-Josep Baselga 2022' (HCB_BIO_001/2) and the 'Daniel Bravo Andreu Private Foundation 2024 Grants' for short stays abroad in biomedical research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Structure determination of as-made zeolite ITQ-52 by three-dimensional electron diffraction

  • Tirado-Castaño, Juan Ignacio
  • Das, Partha Pratim
  • Palatinus, Luká
  • Plana-Ruiz, Sergi
  • Simancas, Jorge
  • Simancas, Raquel
  • Nicolopoulos, Stavros
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Valencia Valencia, Susana|||0000-0001-7160-2795
  • Rey Garcia, Fernando|||0000-0003-3227-5669
[EN] The complete crystal structures of two as-made zeolites with the ITQ-52 structure (IFW framework type), where an alkylphosphonium and an aminophosphonium dications have been used as their respective organic structure-directing agents, have been solved by three-dimensional electron diffraction. Both organic cations have also been located within the 10-ring that connects the cavities of the IFW framework using the diffraction data., Authors acknowledge financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S and PID2022-136934OB-I00 grants funded by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe", and grant TED2021-130191B-C41 funded by MCIN/AEI/10.13039/501100011033 and "European Union Next Generation EU/PRTR") . Authors acknowledge also financial support from Generalitat Valenciana (Project Prometeo 2021/077 and project MFA/2022/047 funded by "Advanced Materials Programme" of Generalitat Valenciana "European Union Next Generation EU/PRTR") . J.I.T. acknowledges grant PRE2018-083623 from project SEV-2016-0683-18-3. The authors acknowledge the Electron Microscopy Service of the Polytechnique University of Valencia (UPV) , the Scientific and Technological Centers of the University of Barcelona (CCiTUB) and the CzechNanoLab Research Infrastructure supported by MEYS CR (LM2023051) for assistance in electron microscopy characterization.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Advanced teleoperation and control system for industrial robots based on augmented virtuality and haptic feedback

  • González, Claudia
  • Girbés-Juan, Vicent
  • Solanes, J. Ernesto|||0000-0001-5011-4872
  • Muñoz García, Adolfo|||0000-0003-2435-3348
  • Gracia Calandin, Luis Ignacio|||0000-0001-9258-9286
  • Tornero Montserrat, Josep|||0000-0003-1571-0251
[EN] There are some industrial tasks that are still mainly performed manually by human workers due to their complexity, which is the case of surface treatment operations (such as sanding, deburring, finishing, grinding, polishing, etc.) used to repair defects. This work develops an advanced teleoperation and control system for industrial robots in order to assist the human operator to perform the mentioned tasks. On the one hand, the controlled robotic system provides strength and accuracy, holding the tool, keeping the right tool orientation and guaranteeing a smooth approach to the workpiece. On the other hand, the advanced teleoperation provides security and comfort to the user when performing the task. In particular, the proposed teleoperation uses augmented virtuality (i.e., a virtual world that includes non-modeled real-world data) and haptic feedback to provide the user an immersive virtual experience when remotely teleoperating the tool of the robot system to treat arbitrary regions of the workpiece surface. The method is illustrated with a car body surface treatment operation, although it can be easily extended to other surface treatment applications or even to other industrial tasks where the human operator may benefit from robotic assistance. The effectiveness of the proposed approach is shown with several experiments using a 6R robotic arm. Moreover, a comparison of the performance obtained manually by an expert and that obtained with the proposed method has also been conducted in order to show the suitability of the proposed approach., This research was founded by the Spanish Government and the Generalitat Valenciana under Grants PID2020-117421RB-C21 and GV/2021/005
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Complexity and recurrence of body surface electrocardiograms correlate with estimated reentrant atrial activity using electrocardiographic imaging in atrial fibrillation patients

  • Molero-Alabau, Rubén
  • Meste, Olivier
  • Peeters, Ralf
  • Karel, Joël
  • Bonizzi, Pietro
  • Guillem Sánchez, María Salud|||0000-0001-5660-3693
[EN] Background Complexity and signal recurrence metrics obtained from body surface potential mapping (BSPM) allow quantifying atrial fibrillation (AF) substrate complexity. This study aims to correlate electrocardiographic imaging (ECGI) detected reentrant patterns with BSPM-calculated signal complexity and recurrence metrics. Methods BSPM signals were recorded from 28 AF patients (17 male, 11 women, 62.69 +/- 8.09 y.o.), followed by ECGI calculation. Signal complexity and recurrence metrics were computed on BSPM and ECGI signals. Rotors per second and rotor duration were computed on ECGI signals for each atrium and the whole atrial surface. Correlation between BSPM metrics and ECGI reentrant patterns for the entire atrial surface and for left atrium (LA) and right atrium (RA) were analyzed. Results Atrial complexity and recurrence metrics strongly correlated when computed on BSPM and ECGI. Higher sample entropy and relative harmonic energy (RHE) correlated with rotors of short duration. The highest dominant frequency of the ECGI signals did not correlate with the reentrant activity of the ECGI. Higher short- and long-term recurrence of BSPM signals correlated with longer duration rotors, particularly for long-term recurrence (r(LA)=0.74 vs. r(RA)=0.42). Only ECGI-based reentrant parameters showed higher LA complexity compared to RA (p < 0.05). Conclusions BSPM metrics strongly correlate with metrics measured on ECGI signals. BSPM metrics indicate a more elevated atrial electro-structural remodeling aligned with more short-duration rotors from ECGI computations. Although BSPM delivers qualitative AF reentry data, ECGI remains essential for identifying regional substrate complexity., This work was supported by: Instituto de Salud Carlos III (supported by FEDER Fondo Europeo de Desarrollo Regional PI17/01106), Generalitat Valenciana and European Social Fund (ACIF/2020/265, BEFPI/2021/062, CIAICO/2022/020), Agencia Estatal de Investigacion PID2020-119364RB-I00, PID2023-149812OB-I00 and CPP2021-008562 by "European Union NextGenerationEU/PRTR". This research has received funding from the European Institute of Innovation and Technology (EIT) under grant agreement No 220385. This European body receives support from the Horizon 2020 research and innovation programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

General scales unlock AI evaluation with explanatory and predictive power

  • Zhou, Lexin
  • Pacchiardi, Lorenzo
  • Collins, Katherine M.
  • Zhang, Seraphina
  • Zhao, Qinlin
  • Huang, Yitian
  • Sun, Luning
  • Prunty, Jonathan E.
  • Li, Zongqian
  • Sanchez-Garcia, Pablo
  • Casares, Pablo A. M.
  • Zu, Jiyun
  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Moros-Daval, Yael
  • Jiang-Chen, Ke-Xin
  • Burden, John
  • Mehrbakhsh, Behzad|||0000-0001-9017-989X
  • Stillwell, David
  • Cebrian, Manuel
  • Wang, Jindong
  • Henderson, Peter
  • Wu, Sherry Tongshuang
  • Kyllonen, Patrick C.
  • Cheke, Lucy
  • Xie, Xing
  • Hernández-Orallo, José|||0000-0001-9746-7632
[EN] Ensuring safe and effective use of artificial intelligence (AI) requires understanding and anticipating its performance on new tasks, from advanced scientific challenges to transformed workplace activities1, 2-3. So far, benchmarking has guided progress in AI but has offered limited explanatory and predictive power for general-purpose AI systems4, 5, 6, 7-8, attributed to limited transferability across specific tasks9, 10-11. Here we introduce general scales for AI evaluation that elicit demand profiles explaining what capabilities common AI benchmarks truly measure, extract ability profiles quantifying the general strengths and limits of AI systems and robustly predict AI performance for new task instances. Our fully automated methodology builds on 18 rubrics, capturing a broad range of cognitive and intellectual demands, which place different task instances on the same general scales, illustrated on 15 large language models (LLMs) and 63 tasks. Both the demand and the ability profiles on these scales bring new insights such as construct validity through benchmark sensitivity and specificity and explain conflicting claims about whether AI has reasoning capabilities. Ultimately, high predictive power at the instance level becomes possible using the general scales, providing superior estimates over strong black-box baseline predictors, especially in out-of-distribution settings (new tasks and benchmarks). The scales, rubrics, battery, techniques and results presented here constitute a solid foundation for a science of AI evaluation, underpinning the reliable deployment of AI in the years ahead., We thank the POLARIS Lab and the Computational Cognitive Science Lab at Princeton University, the European AI Office, the UK AISI, the Future of Life Institute, the OECD Future of Skills team, S. Chang, M. Zilka, J. Lian, R. Burnell, W. Schellaert, A. Gomez, M. Tesic, C. Li and P. Romero for their valuable help and feedback at certain stages of the project. We thank OpenAI for granting us research access to several LLMs to conduct the experiments in this paper and DeepSeek and Meta for giving us access to the weights of their models. We acknowledge support from the following institutions: Microsoft Accelerate Foundation Models Research (AFMR) grant programme, Long-Term Future Scholarship financed by Coefficient Giving (formerly Open Philanthropy) and the Spanish Government's Knowledge Generation Projects (PID2023-150271NB-C21). This work was also supported by CIPROM/2022/6 (FASSLOW), IDIFEDER/2021/05 (CLUSTERIA), CIACIF/2023/276, financed by Generalitat Valenciana, the EC H2020-EU grant agreement no. 952215 (TAILOR), Spanish grants PID2021-122830OB-C42 (SFERA), PID2023-150271NB-C21 and PID2024-162030OB-100 (ROBIN) financed by MCIN/AEI/10.13039/501100011033 and 'ERDF A way of making Europe', Catedra ENIA-UPV in Sustainable AI Development, TSI-100930-2023-9, INCIBE's Chair financed by the EU's NextGenerationEU, EUR2024-153548 (PREDAIT) 'Towards Predictable AI' from 'Spanish Europe Excelencia' 2024, Spanish National Research Council (CSIC) Special Intramural Projects programme and the Cambridge Trust. M.C. declares support from Google.org through the Silicon Valley Community Foundation by means of a grant to Fundacion General CSIC. The research of J.H.-O. is supported by OpenAI's grant to the 'AI Progress through the Lens of Predictable AI Ecosystems' programme, which is based at the Leverhulme Centre for the Future of Intelligence at the University of Cambridge.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gender equality in political events: women taking responsibility, visibility and leadership

  • Corona-Sobrino, Carmen
  • González-Urango, Hannia Karime
  • Poveda Bautista, Rocio|||0000-0001-8904-5421
  • García-Melón, Mónica|||0000-0001-8101-4049
[EN] Women are underrepresented at political events and the roles they assume are of minor importance. These events are unmissable forums in the annual calendar and act as a meeting point for politicians, civil society, associations, companies and academia. They are not only the stage for political discussions at the highest level and a networking opportunity, but they also set the current agenda. However, not all groups are equally represented and play the same roles. This study applies Theory of Change (ToC) approach and aims to examine the connection between specific gender equality interventions and their impact on increasing female participation in political events. We present an empirical study carried out in six political European events to study gender diversity by combining statistical, ethnographic and qualitative techniques. It not only considers the presence of women in the events but also the type and mode of their participation in them. Our results confirm the persistence of the gender gap in political events, mainly in the case of certain types of roles, such as keynote speakers, and particularly in some areas, such as security. Finally, a series of recommendations are offered to be considered before, during and after the event., This work was supported by Generalitat Valenciana [grant number AICO/2021/133]; Horizon 2020: [grant number H2020-SWAFS/0467].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the potential cosmogenic origin of the ultra-high-energy event KM3-230213A

  • Adriani, O.
  • Aiello, S.
  • Albert, A.
  • Alhebsi, A. R.
  • Alshamsi, M.
  • Alves Garre, S.
  • Ambrosone, A.
  • Andre, M.
  • Aphecetche, L.
  • Argüelles, C.
  • Aublin, J.
  • Badaracco, F.
  • Bailly-Salins, L.
  • Ardid, Miguel|||0000-0002-3199-594X
  • Ardid, S.|||0000-0003-4821-6655
  • García-Méndez, Juan|||0000-0002-1580-0647
  • C.A.~Quiroz-Rangel|||0009-0002-3446-8747
[EN] On 2023 February 13, the KM3NeT/ARCA telescope observed a track-like event compatible with a ultra-highenergy muon with an estimated energy of 120 PeV, produced by a neutrino with an even higher energy, making it the most energetic neutrino event ever detected. A diffuse cosmogenic component is expected to originate from the interactions of ultra-high-energy cosmic rays with ambient photon and matter fields. The flux level required by the KM3NeT/ARCA event is, however, in tension with the standard cosmogenic neutrino predictions based on the observations collected by the Pierre Auger Observatory and Telescope Array over the last decade of the ultra-highenergy cosmic rays above the ankle (hence from the local Universe, z ¿ 1). We show here that both observations can be reconciled by extending the integration of the equivalent cosmogenic neutrino flux up to a redshift of zmax = 6 and considering either source evolution effects or the presence of a subdominant independent proton component in the ultra-high-energy cosmic-ray flux, thus placing constraints on known cosmic accelerators., The authors acknowledge the financial support of the KM3NeT-INFRADEV2 project, funded by the European Union Horizon Europe Research and Innovation Programme under grant agreement No. 101079679; Funds for Scientific Research (FRS-FNRS), Francqui foundation, BAEF foundation; Czech Science Foundation (GA&#268;R 24-12702S); Agence Nationale de la Recherche (contract ANR-15-CE31-0020), Centre National de la Recherche Scientifique (CNRS), Commission Européenne (FEDER fund and Marie Curie Program), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Paris Île-de-France Region, Normandy Region (Alpha, Blue-waves and Neptune), France, the Provence-Alpes-Côte d Azur Delegation for Research and Innovation (DRARI), the Provence-Alpes-Côte d Azur region, the Bouches-du-Rhône Departmental Council, the Metropolis of Aix-Marseille Provence and the City of Marseille through the CPER 2021-2027 NEUMED project, the CNRS Institut National de Physique Nucléaire et de Physique des Particules (IN2P3); Shota Rustaveli National Science Foundation of Georgia (SRNSFG, FR-22-13708), Georgia. This work is part of the MuSES project, which has received funding from the European Research Council (ERC) under the European Union s Horizon 2020 Research and Innovation Programme (grant agreement No. 101142396). This work was supported by the European Research Council, ERC starting grant MessMapp, under contract No. 949555. The General Secretariat of Research and Innovation (GSRI), Greece; Istituto Nazionale di Fisica Nucleare (INFN) and Ministero dell Università e della Ricerca (MUR), through PRIN 2022 program (Grant PANTHEON 2022E2J4RK, Next Generation EU) and PON R&I program (Avviso n. 424 del 28 febbraio 2018, Progetto PACK-PIR01 00021), Italy; IDMAR project Po-Fesr Sicilian Region az. 1.5.1; A.D.B., W.I.I., M.B., A.N., G.P., I.C.R., and A.S. have been supported by the Italian Ministero dell Università e della Ricerca (MUR), Progetto CIR01 00021 (Avviso n. 2595 del 24 dicembre 2019); KM3NeT4RR MUR Project National Recovery and Resilience Plan (NRRP), Mission 4 Component 2 Investment 3.1, Funded by the European Union NextGenerationEU,CUP I57G21000040001, Concession Decree MUR No. n. Prot. 123 del 21/06/2022; Ministry of Higher Education, Scientific Research and Innovation, Morocco, and the Arab Fund for Economic and Social Development, Kuwait; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; The grant AstroCeNT: Particle Astrophysics Science and Technology Centre, carried out within the International Research Agendas program of the Foundation for Polish Science financed by the European Union under the European Regional Development Fund; The program: Excellence initiative-research university for the AGH University in Krakow; The ARTIQ project: UMO-2021/01/ 2/ST6/00004 and ARTIQ/0004/2021; Ministry of Research, Innovation and Digitalisation, Romania; Slovak Research and Development Agency under contract No. APVV-22-0413; Ministry of Education, Research, Development and Youth of the Slovak Republic; MCIN for PID2021-124591NB-C41, -C42, -C43 and PDC2023-145913-I00 funded by MCIN/AEI/10.13039/ 501100011033 and by ERDF A way of making Europe, for ASFAE/2022/014 and ASFAE/2022 /023 with funding from the EU NextGenerationEU (PRTR-C17.I01) and Generalitat Valenciana, for grant AST22_6.2 with funding from Consejería de Universidad, Investigación e Innovación and Gobierno de España and European Union NextGenerationEU, for CSICINFRA23013 and for CNS2023-144099, Generalitat Valenciana for CIDEGENT/2018/034, /2019/043, /2020/049, /2021/23, for CIDEIG/2023/20, for CIPROM/2023/51 and for GRISOLIAP/2021/192 and EU for MSC/101025085, Spain; Khalifa University internal grants (ESIG-2023-008, RIG-2023-070 and RIG-2024-047), United Arab Emirates; the European Union s Horizon 2020 Research and Innovation Programme (ChETECINFRA Project No. 101008324).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Temperature dependence of the Raman spectrum of orthorhombic Bi2Se3

  • Mediavilla-Martínez, Irene
  • Kramberger, Christian
  • Dadgostar, Shabnam
  • Ayala, Paola
  • Pichler, Thomas
  • Rodríguez-Hernández, Plácida
  • Muñoz, Alfonso
  • Serebryanaya, Nadezhda
  • Buga, Sergey
  • Serrano, Jorge
  • Saiz, Juan Ángel
  • Manjón, Francisco-Javier|||0000-0002-3926-1705
[EN] Bismuth selenide, a benchmark topological insulator, grows in a trigonal structure at ambient conditions and exhibits a number of enticing properties related to the formation of Dirac surface states. Besides this polytype, a metastable orthorhombic modification with the Pnma space group, o-Bi2Se3, has been produced by electrodeposition and high-pressure high-temperature synthesis. It displays significant thermoelectric properties in the midtemperature range, particularly upon Sb doping. However, very little experimental information is available on the fundamental properties of this orthorhombic polytype, such as, e.g., the electronic band gap and the lattice dynamics. Here we report the temperature dependence of the Raman spectra of o-Bi2Se3 between 10 K and 300 K, which displays an anharmonic behavior of the optical phonons that can be modeled with a two-phonon decay channel. To analyze the data, we performed ab initio calculations of the electronic band structure, the phonon frequencies at the center of the Brillouin zone, and the phonon dispersion relations along the main symmetry directions, examining the effect of spin-orbit coupling in both phonon and electronic energies. Lastly, we report cathodoluminescence experiments at 83 K that set a lower limit to the electronic band gap at 0.835 eV, pointing to an indirect nature, in agreement with our calculations. These results shed light on the essential properties of orthorhombic Bi2Se3 for further understanding of the potential of this semiconductor for thermoelectrics and other relevant applications., This work is financed by the Spanish Ministerio de Ciencia e Innovación and the Agencia Estatal de Investigación MCIN/AEI/10.13039/501100011033 as part of the project MALTA Consolider Team Network (RED2022-134388-T), and I+D+i Projects No. PID2019-106383GB-42/43, No. PID2021-126046OB-C22, No. TED2021-130786B-I00 also funded by MTED, and No. PID2022-138076NB-C42/C44 cofinanced by EU FEDER funds. It is also funded by projects CIPROM/2021/075 (GREENMAT) and MFA/2022/025 (ARCANGEL), financed by the Generalitat Valenciana. The last project also forms part of the Advanced Materials program supported by the Spanish MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1). I.M.-M. also acknowledges financial support from the European Social Fund Plus, Operational Program of Castilla y Leon and the Junta de Castilla y Leon, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of morphology and composition of spherical layered double hydroxide particles and derived mixed oxides on photocatalytic CO 2 reduction

  • Molina-Muriel, Manuel
  • Eledath-Changarath, Mahesh
  • Dhingra, Archit
  • Sánchez-Royo, J. F.
  • Ribera, Antonio
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Considering the flexibility in the synthesis that allows the formation of materials with more than two metals, the present study reports the preparation of trimetallic layered double hydroxides (LDHs) having Al as structural tripositive cation, Ti as photocatalytically active d 0 transition metal and either Ni or Co as dipositive cation. In addition, these LDHs were used as precursors of the corresponding trimetallic mixed oxides (MO). LDH and MO materials in combination with Ru(bpy) 3 Cl 2 as photosensitizer and triethanolamine as sacrificial electron donor were used as catalysts for CO 2 reduction under solar light irradiation. A different product selectivity, either CH 4 for Ni-LDH or CO and H 2 for Co -MO, was observed with production rates for CH 4 or CO that are among the highest reported for these systems. The role of the inorganic materials in the photocatalytic process was supported by transient absorption spectroscopy that revealed the quenching of the Ru(bpy) 3 Cl 2 triplet excited state by Ni-LDH or Co -MO. An important finding was that the trimetallic Co -Ti -Al oxide with cobaltite structure is able to perform CO 2 reduction in spite that the reduction potential of its conduction band is not sufficient to perform the process, evidence by photoluminescence revealing the existence of an upper electronic state responsible for the reduction. These results show the interest in screening multimetallic materials in photocatalysis due to their improved performance and diverse properties., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PID2021-0126071-OB-CO21 and PID2021- 125907NB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER) and Generalitat Valenciana (Prometeo 2021-038, CIPROM- 2022-60 and Advanced Materials Program MFA-2022-023 and MFA- 2022-057 with funding from European Union Next Generation EU PRTR-C17.I1) are gratefully acknowledged. M. M. thanks the Universitat Politecnica de Valencia for a postgraduate scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Deep Learning Framework to classify Breast Density with Noisy Labels Regularization

  • López-Almazán, Héctor
  • Larroza, Andrés
  • Pollán, Marina
  • Perez-Gomez, Beatriz
  • Salas-Trejo, Dolores
  • Casals, María
  • Perez-Benito, Francisco Javier|||0000-0002-6290-5644
  • Perez-Cortes, Juan-Carlos|||0000-0001-6506-090X
  • Llobet Azpitarte, Rafael|||0000-0002-8278-9740
[EN] Background and Objective: Breast density assessed from digital mammograms is a biomarker for higher risk of developing breast cancer. Experienced radiologists assess breast density using the Breast Image and Data System (BI-RADS) categories. Supervised learning algorithms have been developed with this objective in mind, however, the performance of these algorithms depends on the quality of the ground truth information which is usually labeled by expert readers. These labels are noisy approximations of the ground truth, as there is often intra-and inter-reader variability among labels. Thus, it is crucial to provide a reliable method to obtain digital mammograms matching BI-RADS categories. This paper presents RegL (Labels Regularizer), a methodology that includes different image pre-processes to allow both a correct breast segmentation and the enhancement of image quality through an intensity adjustment, thus allowing the use of deep learning to classify the mammograms into BI-RADS categories. The Confusion Matrix (CM) CNN network used implements an architecture that models each radiologist's noisy label. The final methodology pipeline was determined after comparing the performance of image pre-processes combined with different DL architectures.Methods: A multi-center study composed of 1395 women whose mammograms were classified into the four BI-RADS categories by three experienced radiologists is presented. A total of 892 mammograms were used as the training corpus, 224 formed the validation corpus, and 279 the test corpus.Results: The combination of five networks implementing the RegL methodology achieved the best results among all the models in the test set. The ensemble model obtained an accuracy of (0.85) and a kappa index of 0.71. Conclusions: The proposed methodology has a similar performance to the experienced radiologists in the classification of digital mammograms into BI-RADS categories. This suggests that the pre-processing steps and modelling of each radiologist's label allows for a better estimation of the unknown ground truth labels., This work was partially funded by Generalitat Valenciana through IVACE (Valencian Institute of Business Competitiveness) distributed nominatively to Valencian technological innovation centres under project expedient IMAMCN/2021/1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The cone of curves and the Cox ring of rational surfaces over Hirzebruch surfaces

  • Galindo, Carlos
  • Moreno-Ávila, Carlos Jesús
  • Monserrat Delpalillo, Francisco José|||0000-0003-2221-0140
[EN] Let X be a rational surface obtained by blowing up a configuration C of infinitely near points over a Hirzebruch surface F_delta. We prove that there exist two positive integers a ≤ b such that the cone of curves of X is finite polyhedral and minimally generated whenever delta ≥ a, and the Cox ring of X is finitely generated whenever delta ≥ b. The integers a and b depend only on a combinatorial object (a graph decorated with arrows) that represents the strict transforms of the exceptional divisors, their intersections, and their intersections with the fibers and the special section of F_delta., The authors were partially funded by MCIN/AEI/10.13039/501100011033 and by ERDF, UE, grant PID2022-138906NB-C22, as well as by Universitat Jaume I, grant GACUJIMA- 2024-03. The third author was also supported by the Margarita Salas postdoctoral contract MGS/2021/14(UP2021-021) financed by the European Union- NextGenerationEU. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Focusing performance of Fibonacci tiling-based zone plates

  • Garmendía-Martínez, Adrián
  • Muñoz-Pérez, Francisco Misael|||0000-0002-0313-5029
  • Castro-Palacio, Juan Carlos|||0000-0002-0132-9989
  • Ferrando, Vicente|||0000-0002-7434-7109
  • Monsoriu Serra, Juan Antonio|||0000-0003-3350-7951
  • Furlan, Walter D.
[EN] In this work, we present the Fibonacci Tiling-Based Zone Plates (FTZPs) characterized by a Fibonacci binary array generated using complementary substitution rules applied in both horizontal and vertical directions. The resulting array forms a quasiperiodic structured pattern where each row and column corresponds to a Fibonacci sequence or its Boolean complement. This array defines a transmittance function in a normalized spatial domain, partitioned into rectangulars sub-regions. Unlike conventional Fibonacci zone plates, which feature concentric rings, the FTZP consists of transparent and opaque rectangles, offering unique optical properties advantageous for diffraction-based applications. The intensity distribution along the optical axis and the evolution of transverse diffraction patterns are investigated through both numerical simulation and experimental measurements., This research was funded by grants from the Ministerio de Ciencias e Innovación (grant PID2022-142407NB-100) and the Generalitat Valenciana (grant CIPROM/2022/30), Spain. F.M.M.P. and A.G.M. acknowledge the financial support from the Universitat Politècnica de València (PAID-10-24) and from the Generalitat Valenciana (GRISOLIAP/2021/121), respectively
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

&apos, You are not empowered, you have neither character nor pride&apos

  • Saz Rubio, María Milagros del|||0000-0002-7535-2903
[EN] This paper aims to unveil the most frequent discursive practices of aggressive language addressed at three female Spanish politicians on X (formerly Twitter) and the themes around which these practices revolve. Isabel D & iacute;az-Ayuso, Irene Montero, and Yolanda D & iacute;az were selected for analysis. A mixed-methods analysis of 1,500 randomly retrieved posts was conducted. Aggressive language aimed at delegitimizing the politicians was manually coded based on existing taxonomies. A data-driven taxonomy was obtained with the most frequently involved themes to assess gender-based representations. Quantitative findings pointed to interindividual differences that were qualitatively analyzed. Aggression towards Yolanda D & iacute;az was conveyed through insults and negative comments questioning her intelligence, physical appearance, and political affiliation. Replies to Isabel D & iacute;az-Ayuso questioned the morality of her decisions regarding social issues. At the same time, Irene Montero received more insults and sexist negative comments focusing on her sexuality and subordination to male figures.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Antibiotic Resistance in Early Life: Deciphering the Influence of Perinatal Factors, Breastfeeding, and Gut Microbiota on Infant&apos, s Resistome

  • Samarra Mas, Anna
[ES] El uso temprano de antibióticos afecta el desarrollo de la microbiota intestinal infantil y contribuye a la aparición de resistencias antimicrobianas, con implicaciones para la salud global. El resistoma intestinal ¿conjunto de genes de resistencia a antibióticos (ARGs) presentes en la microbiota¿ se establece durante esta etapa crítica y está influenciado por la transmisión materna, factores ambientales y la dieta. Esta tesis doctoral busca caracterizar la evolución del resistoma intestinal infantil durante el primer año de vida, identificar factores que modulan su configuración y explorar el papel de la lactancia materna y los oligosacáridos de la leche humana (HMOs) como estrategia natural para limitar la propagación de ARGs. Los participantes de este estudio formaron parte de una cohorte longitudinal más amplia, llevada a cabo en la región mediterránea entre 2015 y 2019. En esta tesis se utilizaron muestras fecales de parejas madre-lactante, recolectadas desde los 7 días hasta el primer año de vida, así como muestras de leche materna. Para evaluar la composición microbiana en cada momento, se aplicaron tecnologías de secuenciación de nueva generación dirigidas a la región V3-V4 del gen 16S rRNA, así como metagenómica shotgun. Métodos dependientes e independientes de cultivo fueron empleados para estudiar el resistoma. Además, se aplicaron aislamientos en medios selectivos y cinética de crecimiento bacteriano para analizar cepas específicas bajo condiciones definidas. Se observó un aumento progresivo en la diversidad y abundancia de ARGs durante el primer año de vida, especialmente aquellos asociados a tetraciclinas, aminoglucósidos, betalactámicos y macrólidos, mientras que los elementos genéticos móviles (MGEs) disminuyeron con el tiempo. Los nacidos por cesárea o alimentados con fórmula infantil mostraron perfiles de resistencia más amplios. Se identificó una relación inversa entre la abundancia del género Bifidobacterium y la carga total de ARGs en lactantes, lo que sugiere un papel protector de este género frente a cepas resistentes. Además, un análisis metagenómico durante el primer año de vida confirmó que la lactancia materna favorece perfiles microbianos más estables y con menor carga de ARGs, incluso en casos de cesárea o exposición perinatal a antibióticos. También se evaluó cómo la composición individual de los HMOs influye en el resistoma infantil, observándose que los perfiles de madres secretoras reducen la carga de ARGs en lactantes nacidos por cesárea. Por último, se estudió la capacidad de cepas bacterianas del entorno materno-infantil para degradar HMOs y sus perfiles de resistencia. Se aislaron bifidobacterias y lactobacilos de muestras fecales y de leche humana, analizándose mediante secuenciación genómica, ensayos con HMOs y pruebas de susceptibilidad a antibióticos. Bifidobacterium bifidum y B. longum subsp. infantis mostraron alta capacidad de utilización de HMOs y baja resistencia, mientras que B. animalis subsp. lactis fue resistente a múltiples antibióticos sin capacidad para degradar HMOs. Esto resalta la importancia de la lactancia materna para favorecer bacterias beneficiosas con baja resistencia y subraya su vulnerabilidad a la exposición a antibióticos. En conjunto, esta tesis amplía el conocimiento sobre el resistoma intestinal infantil y evidencia la influencia de factores perinatales, ambientales y nutricionales en su desarrollo. Los hallazgos refuerzan la necesidad de promover la lactancia materna, reducir el uso innecesario de antibióticos en el periodo perinatal y considerar el monitoreo del resistoma como estrategia de salud pública., [CA] Early antibiotic use affects the development of the infant gut microbiota and contributes to the emergence of antimicrobial resistance, with global health implications. The intestinal resistome¿defined as the collection of antibiotic resistance genes (ARGs) present in the microbiota¿is established during this critical stage and is influenced by maternal transmission, environmental factors, and diet. This doctoral thesis aims to characterize the evolution of the infant intestinal resistome during the first year of life, identify the factors that shape its configuration, and explore the role of breastfeeding and human milk oligosaccharides (HMOs) as a natural strategy to limit the spread of ARGs. Participants in this study were part of a larger longitudinal cohort conducted in the Mediterranean region between 2015 and 2019. This thesis analyzed fecal samples from mother-infant pairs collected from day 7 through the first year of life, as well as human milk samples. To assess microbial composition at each time point, next-generation sequencing (NGS) targeting the V3-V4 region of the 16S rRNA gene and shotgun metagenomics were applied. Both culture-dependent and culture-independent methods were employed to study the resistome. Additionally, selective media isolation and bacterial growth kinetics were used to characterize specific strains under defined conditions. A progressive increase in the diversity and abundance of ARGs was observed during the first year of life, particularly those associated with tetracyclines, aminoglycosides, beta-lactams, and macrolides, while mobile genetic elements (MGEs) decreased over time. Infants born by cesarean section or fed with infant formula showed broader resistance profiles. An inverse relationship was identified between the abundance of the genus Bifidobacterium and the total ARG burden in infants, suggesting a protective role of this genus against resistant strains. Furthermore, a metagenomic analysis over the first year confirmed that breastfeeding promotes more stable microbial profiles with lower ARG loads, even in cases of cesarean delivery or perinatal antibiotic exposure. The individual composition of HMOs was also evaluated in relation to the infant resistome, revealing that the maternal secretor HMO profile may reduce ARG load in cesarean-born infants. Finally, the capacity of maternal-infant-associated bacterial strains to degrade HMOs and their resistance profiles was studied. Bifidobacterium and Lactobacillus strains were isolated from fecal and human milk samples and analyzed through whole-genome sequencing, HMO utilization assays, and antibiotic susceptibility testing. Bifidobacterium bifidum and B. longum subsp. infantis demonstrated high HMO utilization capacity and low resistance, while B. animalis subsp. lactis exhibited multi-drug resistance and no ability to degrade HMOs. These findings highlight the importance of breastfeeding in promoting beneficial, low-resistance bacteria, while also underscoring their vulnerability to antibiotic exposure. Overall, this thesis expands current knowledge of the infant intestinal resistome and reveals the influence of perinatal, environmental, and nutritional factors on its development. The findings support the need to promote exclusive breastfeeding, reduce unnecessary antibiotic use in the perinatal period, and consider resistome monitoring as a public health strategy., [EN] L'ús d'antibiòtics en nounats ha afectat el desenvolupament de la microbiota intestinal infantil i ha contribuït a l'aparició de resistències antimicrobianes, amb implicacions per a la salut global. El resistoma intestinal ¿conjunt de gens de resistència a antibiòtics (ARGs) presents en la microbiota¿ s'ha establert durant aquesta etapa crítica i ha estat influenciat per la transmissió materna, els factors ambientals i la dieta. Aquesta tesi doctoral ha tingut com a objectiu caracteritzar l'evolució del resistoma intestinal infantil durant el primer any de vida, identificar els factors que en modulen la configuració i explorar el paper de la lactància materna i dels oligosacàrids de la llet humana (HMOs) com a estratègia natural per limitar la propagació dels ARGs. Els participants d'aquest estudi han format part d'una cohort longitudinal més àmplia, duta a terme a la regió mediterrània entre els anys 2015 i 2019. En aquesta tesi s'han utilitzat mostres fecals de parelles mare-nadó, recollides des dels 7 dies fins a l'any de vida, així com mostres de llet materna. Per avaluar la composició microbiana en cada moment, s'han aplicat tecnologies de seqüenciació de nova generació dirigides a la regió V3-V4 del gen 16S rRNA, així com metagenòmica de tipus shotgun. S'han emprat mètodes tant dependents com independents del cultiu per estudiar el resistoma. A més, s'han realitzat aïllaments en medis selectius i proves de cinètica de creixement bacterià per analitzar soques específiques en condicions definides. S'ha observat un augment progressiu en la diversitat i l'abundància dels ARGs durant el primer any de vida, especialment aquells associats a tetraciclines, aminoglucòsids, betalactàmics i macròlids, mentre que els elements genètics mòbils (MGEs) han disminuït amb el temps. Els nadons nascuts per cesària o alimentats amb fórmula infantil han mostrat perfils de resistència més amplis. S'ha identificat una relació inversa entre l'abundància del gènere Bifidobacterium i la càrrega total d'ARGs en els lactants, suggerint un paper protector d'aquest gènere davant de soques resistents. A més, els anàlisis basats en metagenòmica al llarg del primer any de vida han confirmat que la lactància materna afavoreix perfils microbians més estables i amb una menor càrrega d'ARGs, fins i tot en casos de cesària o exposició perinatal a antibiòtics. També s'ha avaluat com la composició individual dels HMOs ha influït en el resistoma infantil, observant-se que els perfils d'HMOs de mares secretores poden reduir la càrrega d'ARGs en infants nascuts per cesària. Finalment, s'ha estudiat la capacitat de diverses soques bacterianes de l'entorn mare-nadó per degradar HMOs i els seus perfils de resistència. S'han aïllat bifidobacteris i lactobacils de mostres fecals i de llet humana, i s'han analitzat mitjançant seqüenciació genòmica, assaigs de cinètica amb HMOs i proves de susceptibilitat antibiòtica. Bifidobacterium bifidum i B. longum subsp. infantis han mostrat una alta capacitat d'utilització dels HMOs i una baixa resistència, mentre que B. animalis subsp. lactis ha mostrat resistència a múltiples antibiòtics i incapacitat per degradar els HMOs. Això posa en relleu la importància de la lactància materna per afavorir bacteris beneficiosos amb baixa resistència, alhora que subratlla la seva vulnerabilitat davant l'exposició antibiòtica. En conjunt, aquesta tesi amplica el coneixement sobre el resistoma intestinal infantil i evidencia la influència de factors perinatals, ambientals i nutricionals en el seu desenvolupament. Les troballes reforcen la necessitat de promoure la lactància materna, reduir l'ús innecessari d'antibiòtics durant el període perinatal i considerar la monitorització del resistoma com a estratègia de salut pública., This doctoral thesis has been performed in the MAINBIOTICS Laboratory in the Lactic Acid Bacteria and Probiotics Group in the Food Biotechnology Department at the Institute of Agrochemistry and Food Technology (IATA-CSIC) thanks to the following grant: Subvenciones para la contratación de personal investigador predoctoral (ACIF/2021/376) The predoctoral scholarship training stay (August 2023 to December 2023) at the Bode Lab in the Department of Pediatrics of the University of California San Diego was supervised by Dr. Lars Bode thanks to the following grant: Subvenciones para estancias de contratados predoctorales en centros de investigación fuera de la Comunitat Valenciana (BEFPI 2022)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Functionalization of polyethylene with hydrolytically-stable ester groups

  • Hervàs-Arnandis, Susi
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Leyva Perez, Antonio|||0000-0003-1063-5811
  • Palomar-De Lucas, Brenda
  • Bilanin-Artigado, Cristina
  • Mingueza-Verdejo, Paloma
  • Viciano, Mónica
[EN] Low-density (LD) and high-density polyethylene (HDPE), recycled or not, incorporates up to 7 wt% of ester groups after reacting either with ethyl diazoacetate (EDA) under catalytic and solvent free-reaction conditions, or with maleic anhydride (MA) and acrylates (AC) under catalytic radical conditions. The resulting upcycled polyethylene esters are hydrolytically stable at extreme pH (0-14) and can be further transformed into carboxylic acids, carboxylates, other esters and amides., Financial support by the projects PID2020-115100GB-I00 and TED2021-130465B-I00 (funded by Spanish MCIINN, MCIN/AEI/10.13039/501100011033MICIIN) is acknowledged. The work has also been funded by Generalitat Valenciana, Grupos Emergentes (GV/2021/138). AIMPLAS author thanks Instituto Valenciano de Competitividad Empresarial (IVACE) the founding from the project IMAMCA/2023/4. AIMPLAS and ITQ authors thank Agencia Valenciana d'Innovacio (AVI) and the European Union the founding of the project INNEST/2022/18. J. O.-M. acknowledges the Juan de la Cierva program for the concession of a contract (IJC2018-036514-I). S. H.-A, and C. B. and P. M.-V. thank ITQ, UPV-CSIC for the concession of a contract (FPI-2022-S2-42040 and PAID 01-20, respectively).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of the intermuscular coherence for the early detection of diabetic peripheral neuropathy: a cross-sectional study

  • Junquera-Godoy, Isabel|||0000-0002-6755-5962
  • Martínez-de-Juan, José L.|||0000-0001-9133-3123
  • González-Lorente, Gemma
  • Carot Sierra, José Miguel|||0000-0001-6524-1639
  • Gomis-Tena Dolz, Julio|||0000-0002-1309-2368
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
  • Prats-Boluda, Gema|||0000-0002-9362-5055
  • Mas-Penalva, Gema Concepción
  • Soler-Climent, Esther
[EN] Diabetes mellitus (DM) is a global epidemic characterized by chronic hyperglycaemia due to insulin deficiency or resistance. Diabetic peripheral neuropathy (DPN) is one of its most common complications, affecting up to 50% of patients, and typically presents as a distal, symmetric, length-dependent neuropathy. Early detection of DPN is crucial to reduce its impact on quality of life and healthcare costs. Conventional diagnostic methods, such as nerve conduction studies, have important limitations, whereas surface electromyography (sEMG) offers a non-invasive, real-time assessment of neuromuscular function. This study investigates the potential of sEMG, and specifically intermuscular coherence, as a sensitive biomarker for early DPN detection. Two coherence measures, partial coherence (PC) and partial directed coherence (PDC), derived from multivariate autoregressive (MVAR) models, were analysed in three groups: 33 healthy volunteers (CT), 10 diabetic patients with low DPN risk (LW), and 17 patients with moderate/high DPN risk (MH). In early-stage DPN, synergistic muscle pairs showed increased PC and PDC values compared with controls, likely reflecting neuronal hyperexcitability and compensatory mechanisms within the nervous system. In contrast, more advanced DPN stages exhibited reduced coherence, consistent with nerve fibre loss and central nervous system (CNS) involvement, potentially exacerbated by structural CNS changes such as spinal cord atrophy, which may impair neural plasticity and adaptation. Our results indicate that the dorsiflexor muscle pair, particularly the 10–50 Hz bandwidth of the PDC parameter, effectively discriminated between DPN stages, distinguishing all three groups with statistical significance. These findings support its potential as an early detection biomarker for DPN and as a tool for monitoring disease progression., This study was supported by grants from the Agencia Valenciana de la Innovacio (INNEST/2021/365) and the promoter POLISABIO (POLI-SABIO22_AP05) . Funding for the open-access publication charge was provided by CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Increasing the efficiency of CRISPR/Cas9-mediated genome editing in the citrus postharvest pathogen Penicillium digitatum

  • Ropero-Pérez, Carolina
  • Marcos, Jose F.
  • Manzanares, Paloma
  • Garrigues, Sandra
[EN] Background: Penicillium digitatum is a fungal plant pathogen that causes the green mold disease in harvested citrus fruits. Due to its economical relevance, many efforts have focused on the development of genetic engineering tools for this fungus. Adaptation of the CRISPR/Cas9 technology was previously accomplished with self-replicative AMA1-based plasmids for marker-free gene editing, but the resulting efficiency (10%) limited its practical implementation. In this study, we aimed to enhance the efficiency of the CRISPR/Cas9-mediated gene editing in P. digitatum to facilitate its practical use. Results: Increasing the culture time by performing additional culture streaks under selection conditions in a medium that promotes slower growth rates significantly improved the gene editing efficiency in P. digitatum up to 54-83%. To prove this, we disrupted five candidate genes that were chosen based on our previous high-throughput gene expression studies aimed at elucidating the transcriptomic response of P. digitatum to the antifungal protein PdAfpB. Two of these genes lead to visual phenotypic changes (PDIG_53730/pksP, and PDIG_54100/arp2) and allowed to start the protocol optimization. The other three candidates (PDIG_56860, PDIG_33760/rodA and PDIG_68680/dfg5) had no visually associated phenotype and were targeted to confirm the high efficiency of the protocol. Conclusion: Genome editing efficiency of P. digitatum was significantly increased from 10% to up to 83% through the modification of the selection methodology, which demonstrates the feasibility of the CRISPR/Cas9 system for gene disruption in this phytopathogenic fungus. Moreover, the approach described in this study might help increase CRISPR/Cas9 gene editing efficiencies in other economically relevant fungal species for which editing efficiency via CRISPR/Cas9 is still low., This work was supported by the Severo Ochoa Excellence Program CEX2021- 001189-S, and grant PID2021-125858OB-100 funded by MCIN/AEI/https://doi. org/10.13039/501100011033 and by ERDF A way of making Europe . SG holds a Juan de la Cierva Incorporación grant (IJC2020-042749-I) funded by MCIN/ AEI/ https://doi.org/10.13039/501100011033, ERDF A way of making Europe and NextGenerationEU /PRTR . CR-P holds a predoctoral grant (ACIF/2021/364) funded by Conselleria d Educació (Generalitat Valenciana, Comunitat Valenciana, Spain). Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Monitoring Cloud Services through Models at Runtime: A Case in an Ambient Assisted Living Environment

  • Cedillo, Priscila
  • Insfran, Emilio|||0000-0003-0855-5564
  • Abrahao Gonzales, Silvia Mara|||0000-0003-3580-2014
[EN] Ambient Assisted Living (AAL) has become an important domain that provides software systems and services to support and improve people¿s daily quality of life. Yet, it has not achieved large market penetration. Existing works suggest that this is primarily due to not sufficiently addressing the quality requirements posed by healthcare organizations. In particular, there is a lack of comprehensive frameworks that allow the assessment of the quality of AAL systems. In previous work, we introduced a method for monitoring cloud services using models at runtime (MoS@RT), which allows the monitoring requirements or the metric operationalizations of these requirements to be changed at runtime without the modification of the underlying infrastructure. The method and its supporting infrastructure have been successfully applied in the monitoring of cloud services, but further evaluation in other domains is needed. In this paper, we report a case study on the use of MoS@RT to monitor cloud services in an AAL environment aimed at supporting the elderly¿s well-being. The results suggest that relevant quality attributes of AAL systems can be adequately monitored using MoS@RT and that the report generated by the monitoring infrastructure is useful for service providers and customers to help them ensure that cloud services meet the required levels of quality., We thank to Fundación Carolina, Universidad de Cuenca, and Universitat Politècnica de València for their support. This research is supported by the project Fog Computing applied to monitoring devices used in AAL environments: platform for the elderly (Research Projects DIUC XVII).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of Epoxidized Isobutyl Fatty Esters from Soybean Oil Distillates as Biobased Plasticizers

  • Nájera, Laura N.
  • Orjuela, Alvaro
  • Narvaez-Rincón, Paulo Cesar
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Montanes, Nestor|||0000-0001-6070-127X
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
[EN] This study evaluated the production and performance of biobased epoxidized isobutyl esters (EIE) as sustainable plasticizers for polymers, aiming to support circular economy models within the chemical industry. EIE were synthesized through the esterification of isobutyl alcohol with oleic and linoleic acids as well as soybean oil deodorizer distillates (SODD), followed by subsequent epoxidation. The plasticizing effect of epoxidized isobutyl oleate, linoleate, and soyate was assessed by studying their mechanical and thermal properties and performing Dynamic Mechanical Analysis (DMA) on PVC films prepared at a fixed content of 70 phr using the solvent casting method. The chemical structure of the films was identified by Fourier transform infrared (FTIR) spectroscopy while the permanence of the plasticizers was investigated through migration and volatility tests. Finally, barrier properties such as water vapor permeability and migration were evaluated alongside surface characteristics such as contact angle and transparency by UV-visible spectroscopy. Dioctyl phthalate (DOP) and epoxidized soybean oil (ESO) were used as reference commercial plasticizers. Among the different EIE, epoxidized isobutyl soyate (EIS) showed remarkable results such as high elasticity (500%), high thermal stability, tensile strength (11.2 MPa) comparable to the reference plasticizers, and high plasticizing efficiency (106.2%). However, barrier properties, such as water vapor permeability and migration, were affected by the composition of this epoxidized ester. Overall, EIE exhibited moderate migration rates which limit their use as general purpose PVC plasticizers, but they might be effectively used for low temperature applications and as coplasticizers for different polymers., This research is a part of the grant PID2020-116496RB-C22 funded by MCIN/AEI/10.13039/501100011033. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025, CIGE/2021/094, and CIGE/2023/46. Funded with Aid for First Research Projects (PAID-06-22), Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV). This project was also partially funded by grants from the Newton Fund Institutional Links - Project 526061819 according to Minciencias contract 584-2020, by Program ECOSNORD in accordance with Minciencias contract 487-2021, and by Universidad Nacional de Colombia projects HERMES 61109, 53361, and 46517.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Libro o Monografía (Book)

Oficios de Mar. Educación secundaria

  • Vivancos Ramón, María Victoria|||0000-0002-0099-9614
  • Navarro-Moreno, Valeria|||0000-0003-1513-0521
  • Lehmann-Gravier, Priscila|||0000-0002-5979-9174
[ES]Oficios de Mar forma parte de la colección Visiones de Mar y centra su atención en las actividades profesionales históricamente vinculadas al entorno marítimo, con especial referencia al ámbito mediterráneo. El mar ha constituido una fuente esencial de recursos económicos, sociales y culturales para las comunidades costeras, dando lugar a oficios que han configurado identidades, tradiciones y saberes transmitidos entre generaciones. Desde la pesca artesanal hasta la construcción naval y la navegación comercial, estas actividades representan un patrimonio cultural de notable relevancia. La monografía promueve el reconocimiento de estos oficios como elementos fundamentales del tejido histórico y económico de las regiones costeras, subrayando asimismo la necesidad de prácticas sostenibles que armonicen el aprovechamiento de los recursos marinos con la conservación del ecosistema. Mediante propuestas didácticas, se invita al alumnado a reflexionar sobre la importancia del trabajo humano en la relación con el mar y su contribución a la cultura y al desarrollo social. Las presentes monografías, que pertenecen a la colección Visiones de Mar, se conciben como una herramienta pedagógica diseñada con el propósito de orientar actividades que se llevarán a cabo, primordialmente, en el entorno escolar. No obstante, se destaca la importancia de fomentar la integración y colaboración entre el ámbito escolar y el núcleo familiar, procurando así una experiencia educativa enriquecedora y participativa. Con el propósito de maximizar el impacto educativo y fomentar la participación activa de la escuela, los estudiantes y sus familias, la presente colección se erige como un recurso versátil orientado a potenciar el proceso formativo y contribuir al desarrollo integral de cada individuo., Este estudio forma parte del programa THINKINAZUL y ha sido apoyado por MCIN con financiación de la Unión Europea NextGenerationEU (PRTR-C17.I1) y de la Generalitat Valenciana GVA-THINKINAZUL/2021/008; investigadora principal: María Victoria Vivancos Ramón, Universitat Politècnica de València, España.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of dynamic and operational restrictions in the energy management strategy on fuel cell range extender electric vehicle performance and durability in driving conditions

  • Desantes J.M.|||0000-0002-4124-9393
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • López-Juárez, Marcos|||0000-0001-9886-4728
[EN] Aiming at increasing fuel cell (FC) stack durability in driving conditions, part of the scientific community has focused its efforts on developing energy management strategies (EMS) for fuel cell hybrid vehicles (FCV). Nonetheless, most of these studies do not explicitly explain the effect of constraining the EMS in both degradation and performance when acting on the FC system dynamics or operational space nor consider the FC range-extender (FCREx) architecture for passenger car application. This study evaluates the potential of FCREx architecture to maximize FC stack durability and performance through control strategy dynamic and operational space limitations. For that purpose, a FCV modeling platform was developed and integrated together with an EMS optimizer algorithm and a semi-empirical advanced FC stack degradation model for driving cycle conditions. The resulting modeling platform was then simulated in WLTC 3b driving cycle to predict FC degradation and H-2 consumption with different dynamic and operational restrictions. Practical limits for EMS constraining were identified as -di/dt-(max) = 0.001 A/cm(2)s or i(min) = 0.2 A/cm(2) since they prevented the EMS from fulfilling the constant state-of-charge constraint in high-dynamic driving condition. In this sense, -di/dt-(max )= 0.01 A/cm(2)s and i(min) = 0.15 A/cm(2) were recommended as the combination of constraints that maximizes FC stack durability (+110%) without affecting the FCV operability with only an increase in of 4.7% in H-2 consumption. From these results, a set of recommendations and guidelines for FCREx vehicle manufacturers and FC stack developers were elaborated based on the benefits of understanding the dynamics and operational constraints that the FC system is going to be subjected to under real operation., This research has been partially funded by the Spanish Ministry of Science, Innovation, and University through the University Faculty Training (FPU) program (FPU19/00550) and FEDER and the Generalitat Valenciana, Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital through project IDIFEDER/2021/039.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modified Active Disturbance Rejection Predictive Control: A fixed-order state-space formulation for SISO systems

  • Martínez-Carvajal, Blanca Viviana
  • Sanchís Saez, Javier|||0000-0001-9697-2696
  • Garcia-Nieto, Sergio|||0000-0002-2722-742X
  • Martínez Iranzo, Miguel Andrés|||0000-0002-1444-0651
[EN] This paper presents a novel control strategy that provides active disturbance rejection predictive control on constrained systems with no nominal identified model. The proposed loop relaxes the modelling requirement to a fixed discrete-time state¿space realisation of a first-order plus integrator plant despite the nature of the controlled process. A third-order discrete Extended State Observer (ESO) estimates the model mismatch and assumed plant states. Moreover, the constraints handling is tackled by incorporating the compensation term related to the total perturbation in the definition of the optimisation problem constraints. The proposal merges in a new way state¿space Model Predictive Control (MPC) and Active Disturbance Rejection Control (ADRC) into an architecture suitable for the servo-regulatory operation of linear and non-linear systems, as shown through validation examples., This work has been supported by MCIN/AEI/10.13039/501100011033 [Project PID2020-120087GB-C21] , MCIN/AEI/10.13039/501100011033 [Project PID2020-119468O-I00] , the Generalitat Valenciana regional government, Spain [Project CIAICO/2021/064] , and the Ministry of Science, Technology and Innovation of Colombia [scholarship programme 885] .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Liquid phase laser ablation as a general green physical etching method to prepare MXene dots with arbitrary surface functionalization. Implications in overall water splitting photocatalysis

  • Ramírez-Grau, Rubén
  • Cabrero-Antonino, Maria
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • Rey Cortes, Francís
  • Mínguez-Vega, Gladys
  • Quesne, Matthew G.
  • Catlow, C. Richard A.
  • Mata, Jose A.
[EN] A novel green, fluoride-free etching method allowing installation of surface groups at will for the preparation 0D MXene dots with notable photocatalytic activity is reported. The method consists in the liquid-phase laser ablation using a pulsed Nd-YAG laser (532 nm, 7 ns fwhp, 30 mJ pulse(-1), 10 Hz) that produces the physical Al etching of the Ti3AlC2 precursor forming nanometric Ti3C2 particles. Simultaneously with etching, the surface of the MXene dots become functionalized with organic moieties inherited from the liquid phase as confirmed by XPS and in several cases by FT-IR spectroscopy. The lateral particle size of the Ti3C2 dots depends on the viscosity of the liquid medium and varies from a few nm to above 50 nm. Crystallinity and structure of the Ti3C2 dot is confirmed by high resolution TEM and by selected area electron diffraction of the samples. Ti3C2 dots promote photocatalytic overall water splitting into H-2 and O-2, the activity depending on the nature of the surface terminal groups. However, upon reuse the Ti3C2 dots become significantly degraded into amorphous material, decreasing gradually in photocatalytic activity. This degradation is proposed to be caused by self-oxidation of Ti3C2 dots by the photogenerated holes, as evidenced by the fact that the use of methanol as hole quencher stops deactivation during H-2 production. In sharp contrast with the decay in photocatalytic activity the presence of hole quenchers, the Ti3C2 dots even increase substantially their photocatalytic activity upon reuse, a fact that has been attributed to the optimization of the nature of the surface terminal groups during the photocatalytic process., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 and PDI2021-0126071-OB-CO22 funded by MCIN/AEI/10.13039/501100011033), Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1) and European Commission (ERC Discovery) are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Light-assistance in nitrogen fixation to ammonia by highly dispersed Cs-promoted Ru clusters supported on ZrO2

  • Yong, Peng
  • Shi, Run
  • Antonio Franconetti
  • Melillo, Arianna
  • Forneli Rubio, Mª Amparo
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Light-assisted N-2 fixation to NH3 under mild conditions is attracting massive attention to circumvent energy crisis and global warming. Herein, highly dispersed Cs-decorated Ru sub-nanometric clusters supported on ZrO2 NPs have been prepared by means of MOF-templated transformation method. The obtained catalyst exhibited N-2 hydrogenation activity of 1.6 mmolNH3 g(cat)(-1) h (-1) in the dark (350.C, 0.1 MPa). Remarkably this value increased by over 300 %, reaching 5.1 mmolNH3 g(cat)(-1) h (-1) (204 mmolNH3 g(Ru)(-1) h (-1)) under 1 Sun power illumination (1080 W/ m2) The influence of the incident light wavelength has been evaluated, revealing 81 % and 213 % enhancement in the NIR and visible region, respectively. DFT calculations were carried out to understand the static adsorption states of Ru sub-nanoclusters. Mechanistic studies have confirmed the co-existence of a photothermal and a nonthermal-hot electron mechanism. XPS, PXRD and FTIR analysis have determined that the Cs species block surface Zr4+ acidity, increasing the basicity of the ZrO2 support. Moreover, partially reduced Cs delta+ (0 <delta < 1) species surrounding the Ru active sites are donating electron density to the adjacent Ru sites, favoring N-2 adsorption and subsequent activation. Finally, this photocatalyst has shown an extended stability for 100 h irradiation under continuous flow., Financial support by the Spanish Ministry of Science and Innovation (PDI2021-126071-OB-C21 financed support by MCIN/AEI/10.13039/ 501100011033 and by FEDER "Una manera de hacer Europa"), and Severo Ochoa (CEX2021-1230-S financed support by MCIN/AEI/ 10.13039/501100011033) is gratefully acknowledged. Generalitat Valenciana (Prometeu 2021-038 and MFA-2022-023 financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital) and European Union Horizon 2020 Research and Innovation Programme (Flow-PhotoChem Grant Agreement 862453) are also gratefully acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/ PRTR).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solving the yard crane scheduling problem with dynamic assignment of input/output points

  • Wang, Hongtao
  • Ruiz García, Rubén
  • Villa Juliá, Mª Fulgencia|||0000-0003-0019-8777
  • Vallada Regalado, Eva|||0000-0003-3918-1788
[EN] This paper introduces an automatic yard crane scheduling problem with additional assignments of input/output (I/O) points at the block. I/O points are the buffer between the block and the rest of the terminal and containers are relocated from the block to the I/O points or vice-versa. The crane schedule therefore not only considers movements, storage and retrieval of containers, but must also be coordinated with the release and due times of containers at the I/O points, which are also limited and need to be assigned during the scheduling process. This results in a complex, but at the same time, more realistic problem. Two GRASP (Greedy Randomized Adaptive Search Procedure) heuristic approaches are proposed along with improvements to the solution construction and local search phases that are specifically tailored for this problem. The proposed algorithms are statistically calibrated and comprehensive experiments are designed to assess the performance of the method, including validation across small, medium, and large size instances. The experimental results show that the proposed methods are effective and competitive when compared to existing approaches. The GRASP manages to obtain an optimality average rate of 71.25% for small instances and finds 461 new best solutions in the 480 medium and large instances, with up to 200 containers, when compared to existing approaches for this problem., The authors would like to express their most sincere gratitude to the anonymous referees and their insightful comments which have resulted in a much stronger manuscript. Hongtao Wang is sponsored by the Chinese Scholarship Council (No. 202006890026) . The authors are partially supported by the Spanish Ministry of Science and Innovation under the project "OPRES-Realistic Optimization in Problems in Public Health" (No. PID2021-124975OB-I00) partially financed with FEDER funds and by the Agencia Valenciana de la Innovacio (AVI) under the project "ireves (innovacion en vehiculos de emergencia sanitaria): una herramienta inteligente de decision" (No. INNACC/2021/26, interested readers can visit http://ireves.upv.es) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

University scientific coproduction becomes more social in economic crisis

  • Azagra-Caro, Joaquín M.|||0000-0002-9598-0376
  • Yegros-Yegros, Alfredo
[EN] Universities coproduce scientific knowledge with a variety of stakeholders, including both industry and hospitals. This study investigates whether the relative share of university copublications with one or the other varies according to economic growth and the global burden of disease. In doing so, we also address a gap in Innovation Studies by providing a focused literature review on why hospitals publish and how university-hospital copublications can serve as a channel for socially impactful research. Our analysis, centred on cancer research from 2004 to 2023, examines nearly 500,000 university copublications and reveals a clear pattern: economic growth is associated with a higher share of joint scientific production with industry, while a greater global burden of cancer corresponds with increased collaboration with hospitals. However, during periods of strong economic growth, the shift toward industry collaboration appears to persist even amid significant disease burdens. Given that university-hospital copublications tend to align more directly with public health objectives, we recommend policies that actively support hospital-linked research during economic expansions, ensuring continued attention to pressing societal challenges., Projects AICO/2021/021 of the Valencian Government and PID2022-141605NA-I00 of the Spanish Ministry of Science, Innovation and Universities funded this research. The Mobility Stay Aid Programme PRX21/00595 of the Spanish Ministry of Universities funded Joaqu & imath;n's stay at CWTS.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Self-optimizing metal-free porous reactors with dynamic active sites unlock record oxygen reduction activity

  • Zhang, Lei
  • Xu, Qiaoling
  • Chen, Mengshan
  • Zhang, Yongcai
  • Zhou, Yingtang
  • Hu, Guangzhi
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Efficient metal-free catalysts are crucial for advancing aluminum-air batteries (AABs), yet their development has been hindered by poor electronic structure optimization and sluggish mass transport. In this study, we developed a hierarchically porous N/S co-doped carbon nanoreactor via an etching-doping pyrolysis strategy, achieving an ultrahigh surface area of 2630 m2 g-1 and a well-organized pore network. The resulting catalyst demonstrated outstanding oxygen reduction reaction (ORR) activity, with half-wave potentials of 0.952 V (vs. RHE; RHE stands for reversible hydrogen electrode) in alkaline and 0.754 V (vs. RHE) in acidic media. When assembled into AABs, it delivered a peak power density of 265 mW cm-2 and an energy density of 4152 Wh kg-1, along with excellent cycling stability. Finite element simulations showed that the hierarchical porosity promoted oxygen diffusion and enhanced reaction kinetics. Furthermore, in situ characterization and theoretical calculations revealed that S-C-N configurations dynamically transformed into Opre-S-C-N groups under working conditions, which modulated the electronic structure of adjacent carbon sites, facilitated *O-to-*OH conversion, and reduced energy barriers. This study provided a dynamic site-regulation strategy for improving ORR kinetics in metal-free catalysts and offered a new pathway for designing high-performance energy materials operating under realistic conditions., This work was financially supported by the Outstanding Youth Scientific Research Project for Colleges and Universities of Anhui Province of China (2022AH020054), the Open Research Fund Program of Anhui Province Key Laboratory of Specialty Polymers (Anhui University of Science & Technology, AHKLSP23-06), and the Xinjiang Key Laboratory of Novel Functional Materials Chemistry Open Science Project (XJLNFMC-202406). Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union Next Generation EU PRTR-C17.I1) is also gratefully acknowledged. The authors would like to thank the Analytical and Testing Center (Anhui University of Science & Technology) for the XRD, XPS, and TEM analysis. The authors thank Mr Fu from SCI-GO (https://www.sci-go.com) for performing the BET analysis. The authors extend their gratitude to Ms Hao (from Scientific Compass https://www.shiyanjia.com) for providing invaluable assistance with the SEM analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

PHBV/PCL blend films with active compounds to prolong the shelf life of meat

  • Moll-Montaner, Eva|||0000-0002-6329-4806
  • Chiralt, Amparo|||0000-0003-1134-8144
  • Ferri, Arnau
[EN] Active films based on PHBV/PCL (PP) blends in a 1:1 ratio were obtained by melt blending and compression moulding, with and without 6 % (w/w) ferulic acid (FA) or rice straw extract (RSE), obtained by subcritical water extraction at 180 degrees C. These films (PP, PPFA and PPRSE) were characterised as to their functional, structural and heat-sealing properties, and their ability to preserve pork meat. Structural analysis revealed the immiscibility of the polymers in the mixture, although the active compounds improved interfacial adhesion. The microstructure of the PHBV and PCL phases was affected to a different extent by the active compounds. These did not modify the thermal stability of PCL, but RSE reduced the thermal stability of PHBV. The active compounds promoted UVlight blocking in the films, slightly modified their mechanical properties, and reduced the heat seal strength, without significantly affecting oxygen permeability. RSE slightly promoted water vapour permeability. Blend films with both active compounds extended the shelf life of cold-stored pork by up to 5 days compared to films without active compounds, limiting oxidative reactions and inhibiting bacterial growth., This work was supported by the project PID2022-140444OB-I00 and the Grant PRE2020-091929 funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR, and the projects CIPROM/2021/071 and AGROALNEXT/2022/026 funded by Generalitat Valenciana and European Union NextGenerationEU/PRTR-C17-I1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of complete compressor map using a multi-fidelity approach with low requirements of input working points.

  • Galindo, José|||0000-0001-6068-182X
  • Dolz, Vicente|||0000-0003-1511-6957
  • Navarro, Roberto|||0000-0003-2587-4954
  • Pallás-Cervera, Borja
[EN] Usual methods for characterizing turbomachinery performance maps often require a significant number of input working points. This constraint limits the scope of CFD optimization and parametric studies, which cannot be extended to the whole map due to the computational burden. This work develops multi-fidelity surrogates for pressure ratio and isentropic efficiency. For pressure ratio, a co-Kriging approach is selected, which employs Leufven's method calculated with the input data as low-fidelity. For efficiency, the surrogate focuses on representing power losses relative to the isentropic power, which acts as the low-fidelity model. The proposed multi-fidelity surrogates are found to be much more robust than the literature standards, achieving RSME values below 3 % for pressure ratio and 5 % in terms of efficiency even when reducing the number of input points to a limited set (11 points)., Project supported by the "Agencia Valenciana de la Innovacio" and the European Regional Development Fund 2014-2020: INNEST/2021/221. Borja Pallas was supported by "Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital de la Generalitat Valenciana DOCEMPR UPV program" from the regional government, Generalitat Valenciana co-funded by the European Social Fund (DOCEMPR22) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Barium ion sensing with IPG K+ molecular probes

  • Miller, R. L.
  • Byrnes, N.
  • Cameron, C. G.
  • Carlson, A. J.
  • Dey, E.
  • Madigan, R.
  • Medina, J.
  • Melancon, S.
  • Navarro, K. E.
  • Foss, F. W.
  • Jones, B. J. P.
  • Adams, C.
  • Almazan, H.
  • Aranburu, A. I.
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • García-Barrena, Jara
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
[EN] Fluorophores covalently bound to azacrown ether ionophores can be assembled into sensitive turn-on chemosensors. The size specificity and electron-rich nature of the ionophore's binding domain contribute to both selectivity and strong turn-on fluorescence sensing by various mechanisms when properly constructed. Aza-18-crown-6 ethers are quite selective for binding to K+ and Ba2+, yet the more electron-withdrawing dicationic nature of barium imposes a larger electronic effect on turn-on fluorescent sensors. Barium chemosensors can be important for measuring soluble Ba2+ in drinking water and have gained recent attention for their potential to enhance the detection of rare events in xenon decay. Here we quantify the capability of three chemosensors, marketed for biologically useful K+ sensing, as effective probes for Ba2+ ions. We present measurements from bulk spectrofluorometry to characterize the system in aqueous solutions and demonstrate the usefulness of these species for low-background single-ion fluorescence microscopy, revealing new candidates for Ba2+ sensing., Our program of single metal ion sensing is a part of a collaborative project to employ SMFI chemosensors functional at the solid-gas interface as R&D toward barium tagging for the NEXT experiment. We thank ION Biosciences for supplying the IPG dyes used in these experiments and also for technical support on their best use. We acknowledge support from the US National Science Foundation under award number NSF CHE 2004111 and the Robert A Welch Foundation under award number Y-2031-20200401 (University of Texas Arlington) and the US Department of Energy under awards DE-SC0019054 and DE-SC0019223. The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under Grant Agreement No. 951281-BOLD; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under Grant Agreement No. 957202-HIDDEN; the MCIN/AEI of Spain and ERDF A way of making Europe under grants RTI2018-095979 and PID2021-125475NB, the Severo Ochoa Program grant CEX2018-000867-S and the Ramon y Cajal program grant RYC-2015-18820; the Generalitat Valenciana of Spain under grants PROMETEO/2021/087 and CIDEGENT/2019/049; the Department of Education of the Basque Government of Spain under the predoctoral training program non-doctoral research personnel; the Portuguese FCT under project UID/FIS/04559/2020 to fund the activities of LIBPhys-UC; the Pazy Foundation (Israel) under grants 877040 and 877041; the US Department of Energy under contracts number DE-AC02-06CH11357 (Argonne National Laboratory) and DE-AC02-07CH11359 (Fermi National Accelerator Laboratory). Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Measurement of neutrino oscillation parameters with the first six detection units of KM3NeT/ORCA

  • Aiello, S.
  • Albert, A.
  • Alhebsi, A.R.
  • Alshamsi, M.
  • Alves Garre, S.
  • Ambrosone, A.
  • Ameli, F.
  • Andre, M.
  • Aphecetche, L.
  • Atmani, H.
  • Aublin, J.
  • Badaracco, F.
  • Bailly-Salins, L.
  • Ardid, Miguel|||0000-0002-3199-594X
  • Ardid, S.|||0000-0003-4821-6655
  • García-Méndez, Juan|||0000-0002-1580-0647
  • C.A.~Quiroz-Rangel|||0009-0002-3446-8747
[EN] KM3NeT/ORCA is a water Cherenkov neutrino detector under construction and anchored at the bottom of the Mediterranean Sea. The detector is designed to study oscillations of atmospheric neutrinos and determine the neutrino mass ordering. This paper focuses on an initial configuration of ORCA, referred to as ORCA6, which comprises six out of the foreseen 115 detection units of photo-sensors. A high-purity neutrino sample was extracted, corresponding to an exposure of 433 kton-years. The sample of 5828 neutrino candidates is analysed following a binned log-likelihood method in the reconstructed energy and cosine of the zenith angle. The atmospheric oscillation parameters are measured to be sin(2)theta(23) = 0.51(-0.05)(+0.04), and Delta m(31)(2) = 2.18(-0.35)(+0.25) x 10(-3) eV(2) boolean OR {-2.25,-1.76} x 10(-3) eV(2) at 68% CL. The inverted neutrino mass ordering hypothesis is disfavoured with a p-value of 0.25., The authors acknowledge the financial support of the funding agencies: Funds for Scientific Research (FRS-FNRS), Francqui foundation, BAEF foundation. Czech Science Foundation (GACR 24-12702S); Agence Nationale de la Recherche (contract ANR-15-CE31-0020), Centre National de la Recherche Scientifique (CNRS), Commission Europeenne (FEDER fund and Marie Curie Program), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Paris Ile-de-France Region, Normandy Region (Alpha, Blue-waves and Neptune), France; Shota Rustaveli National Science Foundation of Georgia (SRNSFG, FR-22-13708), Georgia; This work is part of the MuSES project which has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (grant agreement No 101142396). The General Secretariat of Research and Innovation (GSRI), Greece; Istituto Nazionale di Fisica Nucleare (INFN) and Ministero dell'Universita e della Ricerca (MUR), through PRIN 2022 program (Grant PANTHEON 2022E2J4RK, Next Generation EU) and PON R&I program (Avviso n. 424 del 28 febbraio 2018, Progetto PACK-PIR01 00021), Italy; IDMAR project Po-Fesr Sicilian Region az. 1.5.1; A. De Benedittis, W. Idrissi Ibnsalih, M. Bendahman, A. Nayerhoda, G. Papalashvili, I. C. Rea, A. Simonelli have been supported by the Italian Ministero dell'Universita e della Ricerca (MUR), Progetto CIR01 00021 (Avviso n. 2595 del 24 dicembre 2019); KM3NeT4RR MUR Project National Recovery and Resilience Plan (NRRP), Mission 4 Component 2 Investment 3.1, Funded by the European Union -NextGenerationEU,CUP I57G21000040001, Concession Decree MUR No. n. Prot. 123 del 21/06/2022; Ministry of Higher Education, Scientific Research and Innovation, Morocco, and the Arab Fund for Economic and Social Development, Kuwait; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; Ministry of Research, Innovation and Digitalisation, Romania; Slovak Research and Development Agency under Contract No. APVV-22-0413; Ministry of Education, Research, Development and Youth of the Slovak Republic; MCIN for PID2021-124591NB-C41, -C42, -C43 and PDC2023-145913-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", for ASFAE/2022/014 and ASFAE/2022/023 with funding from the EU NextGenerationEU (PRTR-C17.I01) and Generalitat Valenciana, for Grant AST22_6.2 with funding from Consejeria de Universidad, Investigacion e Innovacion and Gobierno de Espana and European Union -NextGenerationEU, for CSIC-INFRA23013 and for CNS2023-144099, Generalitat Valenciana for CIDEGENT/2018/034,/2019/043,/2020/049,/2021/23, for CIDEIG/2023/20, for CIPROM/2023/51 and for GRISOLIAP/2021/192 and EU for MSC/101025085, Spain; Khalifa University internal grants (ESIG-2023-008 and RIG-2023-070), United Arab Emirates; The European Union's Horizon 2020 Research and Innovation Programme (ChETEC-INFRA -Project no. 101008324).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Datos de investigación Set de datos (Dataset)

Microalgae Chorella sp. in biofloc Penaeus vannamei culture [Dataset], Biofloc characterization after achieving a stable population of Chorella sp. for Penaeus vannamei culture (Bonne, 1931).

  • Cascales Martos, Tatiana
Biofloc systems improve water quality and add nutritional value to aquaculture production through complex microbial and planktonic communities, in which the inclusion of microalgae can enhance nutrient recycling and overall system functionality. This study evaluated the inoculation of microalgae in biofloc systems for Penaeus vannamei under different photoperiod regimes. In the first experiment, Chlorella sp. under 16:8 and, particularly, 12:12 photoperiods established stable populations, increased biofloc biodiversity, and improved the mineral profile of the system. In the second experiment, Chlorella sp. persisted for up to 32 days following a single inoculation, reduced nitrate accumulation, and enriched the biofloc with polyunsaturated fatty acids associated with immune function. Although no consistent effect on animal growth was observed, the results highlight the interaction between water quality, biofloc composition, and zootechnical performance. Overall, Chlorella sp. under a 12:12 photoperiod enhanced the ecological and nutritional quality of the biofloc, although further studies are required to optimize inoculation protocols and maximize productive benefits. Shrimp_growth include data on the animals’ growth performance. Water_quality corresponds to the monitoring of biofloc water quality in which the animals were reared. Chlorophyll _concentration include date to chlorophyll content estimate was used to estimate the quantification of the autotrophic population. Plankton_community refers to describe the evolution of biofloc planktonic composition. Nutritional_biofloc refers to dry matter, ash, crude lipid, crude protein anda fatty acid content analyses performed biofloc samples. Mineral_content refers to decribe major and trace mineral element dynamics of biofloc.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Convergent optical fronthaul link for wireless access over different spectral bands

  • Botella-Campos, Marta|||0000-0002-1317-286X
  • Romero-Huedo, Jaime
  • Mora Almerich, José|||0000-0002-2877-4118
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We demonstrate a convergent optical fronthaul link for enabling heterogeneous wireless access technologies in 6G future networks deployment based on a directly modulated laser and an external Mach¿Zehnder modulator biased at null point for optical frequency multiplying. Simultaneous transmission of two M-QAM data signals over baseband and millimeter wave (mmW) frequency band, i.e. 42 GHz, is demonstrated over a 10 km fiber link, showing the suitability for visible light communications and mmW radio access, respectively, to the final user. System intermodulation in mmW band is identified under high received optical power levels and overcome by inserting a dispersion compensation module., The research has been supported by the national project MCIN/AEI/ and ERDF A way of making Europe (PID2021-126514OB-I00 OPTIMISE), and the regional project PROMETEO/2021/015 Disruptive Photonics Technologies for 2030 funded by Generalitat Valenciana, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Integrated membrane process in organic media: combining organic solvent ultrafiltration, nanofiltration, and reverse osmosis to purify and concentrate the phenolic compounds from wet olive pomace.

  • Sánchez-Arévalo, Carmen María|||0000-0001-6357-8107
  • Vincent Vela, Maria Cinta|||0000-0001-8493-0165
  • Alvarez Blanco, Silvia
  • Aldegheri, Fausto
[EN] Phenolic compounds from a hydroalcoholic extract of wet olive pomace were purified and concentrated by an integrated membrane process in organic media. First, UF010104 (Solsep BV) and UP005 (Microdyn Nadir) membranes were tested to be implemented in the ultrafiltration stage, with the aim of purifying the extract and obtaining a permeate enriched in phenolic compounds. Despite the high flux observed with the UF010104 membrane (20.4 ± 0.7 L·h¿1·m¿2, at 2 bar), the UP005 membrane was selected because of a more suitable selectivity. Even though some secoiridoids were rejected, the permeate stream obtained with this embrane contained high concentrations of valuable simple phenols and phenolic acids, whereas sugars and macromolecules were retained. Then, the ultrafiltration permeate was ubjected to a nanofiltration step employing an NF270 membrane (DuPont) for a further purification and fractionation of the phenolic compounds. The permeate flux was 50.2 ± 0.2 L·h¿1·m¿2, working at 15 ar. Hydroxytyrosol and some phenolic acids (such as vanillic acid, caffeic acid, and ferulic acid) were recovered in the permeate, which was later concentrated by reverse osmosis employing an F90 membrane. The permeate flux obtained with this membrane was 15.3 ± 0.3 L·h¿1·m¿2. The concentrated phenolic mixture that was obtained may have important applications as a powerful ntioxidant and for the prevention of diabetes and neurodegenerative diseases., This research was funded by Generalitat Valencia, grant number CIAICO/2021/333. Additionally, a predoctoral grant PRE2018-08524 was funded by the Spanish Ministerio de Ciencia e Innovación (MCIN) /Agencia Estatal de Investigación (AEI)/10.13039/501100011033 and by European Social Fund (ESF) Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Sperm Quality and Cryopreservation in Teleost: Effect of Seminal Plasma Component and Climate Change

  • Padilla Sánchez, Malbelys
[ES] La selección de gametos de alta calidad es un requisito indispensable a tener en cuenta en los programas de reproduccion asistida. El desarrollo de herramientas biotecnológicas como la criopreservación de gametos, juega un papel importante en la producción acuicola y en la formación de bancos de germoplasma, que contribuiran luego en la mejora genética de las poblaciónes de peces, principalmente aquellas en peligro y que pudieran estar más afectadas ante futuros cambios climáticos. En la primera fase de esta tesis realizada en la Unesp, se trabajó con una especie neotropical de elevada importancia económica para la region Suramericana. La segunda fase realizada en la UPV se trabajó con la Anguila europea (Anguilla anguilla), una especie clasificada en la Lista Roja de la (UICN) como especie "en peligro crítico de extinción". En la primera fase se buscó caracterizar la composición bioquímica del plasma y las características seminales de la especie para evaluar las posibles relaciones entre estos parámetros. El plasma seminal estuvo principalmente compuesto por iones de sodio (Na+) y dentro de los componentes orgánicos sobresalieron las proteínas totales y la glucosa. A través del análisis de componentes principales (PCA) se observó que la motilidad tenía una fuerte correlación positiva con el tiempo de motilidad, la concentración de espermatozoides y las proteínas totales. Estos análisis sirvieron de base para la creación de una solución diluyente utilizada posteriormente en la sustancia crioprotectora. Luego se determinó la influencia del plasma seminal como constituyente de la solución crioprotectora en la criopreservación de semen de P. reticulatum. Se utilizaron tres tratamientos: glucosa 5% + metanol 10% (T1), a este crioprotector se le agregó 30% de plasma seminal natural (T2) y 30% de plasma seminal artificial en base a los resultados de los componentes bioquímicos del plasma determinados para la especie en el experimento anterior (T3). Se evaluaron parámetros de motilidad espermática, capacidad fecundante del semen criopreservado, así como fragmentación del ADN. El tratamiento T1 resultó con los mejores valores de motilidad seguido del T2, y la capacidad fertilizante de estos dos tratamientos fue similar al control, sin embargo, el tratamiento T2 mostró menos daño en el ADN. Mediante el PCA se demostró que T1 tenía una mejor relación positiva con la fertilidad y la motilidad total y progresiva. Finalmente, evaluamos las estructuras de las subpoblaciones espermáticas en cada uno de los tratamientos utilizados. Mediante análisis multivariado en dos etapas, fue posible determinar tres subpoblaciones espermáticas en el semen crioconservado de la especie, SP1 (rápido-lineal), SP2 (rápido-no lineal) y SP3 (lento-lineal). T1 presentó el mayor porcentaje de SP1, siendo confirmado por la efectividad en la protección de las células de este tratamiento en el proceso de criopreservación de la especie. En la segunda fase que se está llevó a cabo en la UPV, el objetivo general fue determinar el efecto de la temperatura y el pH del agua de mar sobre la motilidad de los espermatozoides en la Anguila europea. Se determinó que el bajo pH del agua de mar (6.5-7.4) disminuyó la motilidad de los espermatozoides de anguila en comparación con el control (pH= 8.2). Cuando estudiamos el efecto combinado del pH del plasma seminal artificial y el pH de ASW (7.8 y 8.2), no encontramos diferencias estadísticas en la motilidad y cinética de los espermatozoides en relación con el pH del plasma seminal artificial, pero sí el pH del agua de mar. Se encontraron valores más altos de motilidad total (MOT), FA(rápidos) y ME (médios) con un pH de 8.2 que con un pH de 7.8. En contraste, la temperatura del agua de mar no afectó los parámetros de motilidad de los espermatozoides o la longevidad de los espermatozoides en el contexto del cambio climático., [CA] La selecció de gàmetes d'alta qualitat és un requisit indispensable a tenir en compte en els programes de reproducció assistida. El desenvolupament d'eines biotecnològiques com la criopreservació de gàmetes, juga un paper important en la producció aqüicola i en la formació de bancs de germoplasma, que contribuiran després a la millora genètica de les població de peixos, principalment aquelles en perill i que poguessin estar més afectades davant de futurs canvis climàtics. A la primera fase d'aquesta tesi realitzada a la Unesp, es va treballar amb una espècie neotropical d'elevada importància econòmica per a la regió sud-americana. La segona fase realitzada a la UPV es va treballar amb l'Anguilla europea (Anguilla anguilla), una espècie classificada a la Llista Vermella de la (UICN) com a espècie "en perill crític d'extinció". A la primera fase es va buscar caracteritzar la composició bioquímica del plasma i les característiques seminals de l'espècie per avaluar les possibles relacions entre aquests paràmetres. El plasma seminal va estar principalment compost per ions de sodi (Na+) i dins dels components orgànics van sobresortir les proteïnes totals i la glucosa. A través de l'anàlisi de components principals (PCA), es va observar que la motilitat tenia una forta correlació positiva amb el temps de motilitat, la concentració d'espermatozoides i les proteïnes totals. Aquestes anàlisis van servir de base per a la creació d'una solució diluent utilitzada posteriorment a la substància crioprotectora. Després es va determinar la influència del plasma seminal com a constituent de la solució crioprotectora en la criopreservació de semen de P. reticulatum. Es van utilitzar tres tractaments: glucosa 5% + metanol 10% (T1), a aquest crioprotector se li va afegir 30% de plasma seminal natural (T2) i 30% de plasma seminal artificial sobre la base dels resultats dels components bioquímics del plasma determinats per a l'espècie a l'experiment anterior (T3). S'avaluaren paràmetres de motilitat espermàtica, capacitat fecundant del semen criopreservat, així com fragmentació de l'ADN. El tractament T1 va resultar amb els millors valors de motilitat seguit del T2, i la capacitat fertilitzant d'aquests dos tractaments va ser similar al control, però el tractament T2 va mostrar menys mal a l'ADN. Mitjançant el PCA es va demostrar que T1 tenia una millor relació positiva amb la fertilitat i la motilitat total i progressiva. Finalment, avaluem les estructures de les subpoblacions espermàtiques a cadascun dels tractaments utilitzats. Mitjançant anàlisi multivariada en dues etapes, va ser possible determinar tres subpoblacions espermàtiques en el semen crioconservat de l'espècie, SP1 (ràpid-lineal), SP2 (ràpid-no lineal) i SP3 (lent-lineal). T1 va presentar el percentatge més gran de SP1, i va ser confirmat per l'efectivitat en la protecció de les cèl·lules d'aquest tractament en el procés de criopreservació de l'espècie. A la segona fase que es va dur a terme a la UPV, l'objectiu general va ser determinar l'efecte de la temperatura i el pH de l'aigua de mar sobre la motilitat dels espermatozoides a l'Anguila europea. Es va determinar que el pH baix de l'aigua de mar (6.5-7.4) va disminuir la motilitat dels espermatozoides d'anguila en comparació del control (pH= 8.2). Quan estudiem l'efecte combinat del pH del plasma seminal artificial i el pH d'ASW (7.8 i 8.2), no trobem diferències estadístiques en la motilitat i la cinètica dels espermatozoides en relació amb el pH del plasma seminal artificial, però sí el pH de l'aigua de mar. Es van trobar valors més alts de motilitat total (MOT), FA(ràpids) i ME (metges) amb un pH de 8.2 que amb un pH de 7.8. En contrast, la temperatura de l'aigua de mar no va afectar els paràmetres de motilitat dels espermatozous o la longevitat dels espermatozous en el context del canvi climàtic., [EN] The selection of high-quality gametes is an essential requirement to take into account in assisted reproduction programs. The development of biotechnological tools such as cryopreservation of gametes plays an important role in aquaculture production and in the formation of germplasm banks, which will later contribute to the genetic improvement of fish populations, mainly those in danger and that could be more affected by future climate changes. In the first phase of this thesis carried out at Unesp, we worked with a neotropical species of high economic importance for the South American region. The second phase carried out at the UPV worked with the European Eel (Anguilla anguilla), a species classified on the (IUCN) Red List as a "critically endangered" species. In the first phase, we sought to characterize the biochemical composition of the plasma and the seminal characteristics of the species to evaluate the possible relationships between these parameters. The seminal plasma was mainly composed of sodium ions (Na+) and within the organic components, total proteins and glucose stood out. Through principal component analysis (PCA) it was observed that motility had a strong positive correlation with motility time, sperm concentration and total proteins. These analyzes served as the basis for the creation of a diluent solution later used in the cryoprotective substance. Then the influence of seminal plasma as a constituent of the cryoprotectant solution in the cryopreservation of P. reticulatum semen was determined. Three treatments were used: 5% glucose + 10% methanol (T1), 30% natural seminal plasma (T2) and 30% artificial seminal plasma were added to this cryoprotectant based on the results of the determined biochemical components of the plasma. for the species in the previous experiment (T3). Parameters of sperm motility, fertilizing capacity of cryopreserved semen, as well as DNA fragmentation were evaluated. Treatment T1 resulted with the best motility values followed by T2, and the fertilizing capacity of these two treatments was similar to the control, however, treatment T2 showed less DNA damage. Using PCA, it was shown that T1 had a better positive relationship with fertility and total and progressive motility. Finally, we evaluated the structures of the sperm subpopulations in each of the treatments used. Through two-stage multivariate analysis, it was possible to determine three sperm subpopulations in the cryopreserved semen of the species, SP1 (fast-linear), SP2 (fast-nonlinear) and SP3 (slow-linear). T1 presented the highest percentage of SP1, being confirmed by the effectiveness in protecting the cells of this treatment in the cryopreservation process of the species. In the second phase that is being carried out at the UPV, the general objective was to determine the effect of temperature and pH of seawater on sperm motility in the European Eel. It was determined that the low pH of seawater (6.5-7.4) decreased the motility of eel sperm compared to the control (pH= 8.2). When we studied the combined effect of the pH of the artificial seminal plasma and the pH of ASW (7.8 and 8.2), we did not find statistical differences in the motility and kinetics of the sperm in relation to the pH of the artificial seminal plasma, but we did find the pH of the water of sea Higher values of total motility (MOT), FA (fast) and ME (medium) were found at a pH of 8.2 than at a pH of 7.8. In contrast, seawater temperature did not affect sperm motility parameters or sperm longevity in the context of climate change., I also thank the Coordination for the Improvement of Higher Education Personnel (CAPES/PROEX) (N° 88887.302629/2018-00), National Council for Scientific, Technological Development CNPq (N° 200452/2022-3) and the Brazilian fostering agencies Foundation for Research Support of the State of Sao Paulo FAPESP (N° 2020/15020-0), for its financial support in Brazil. In Spain, the ThinkInAzul programme, supported by the Spanish Ministry of Science and Innovation (MCIN) with funding from the European Union NextGenerationEU (PRTR-C17.I1) and the Generalitat Valenciana (THINKINAZUL/2021/012) to SEASPERM, which has made it possible the preparation of this work. To the AUIP (Ibero-American Postgraduate University Association) for the Academic Mobility scholarship between Institutions Associated with the AUIP 2022
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Topological effects in ultrafast photoinduced processes between flurbiprofen and tryptophan in linked dyads and within human serum albumin

  • Tamarit-Mayo, Lorena
  • Jiménez, M Consuelo|||0000-0002-8057-4316
  • Vayá Pérez, Ignacio|||0000-0003-1682-9342
  • García-Gabarda, Laura
  • Miranda, Miguel A.
[EN] The interaction dynamics between flurbiprofen (FBP) and tryptophan (Trp) has been studied in covalently linked dyads and within human serum albumin (HSA) by means of fluorescence and ultrafast transient absorption spectroscopy. The dyads have proven to be excellent models to investigate photoinduced processes such as energy and/or electron transfer that may occur in proteins and other biological media. Since the relative spatial arrangement of the interacting units may affect the yield and kinetics of the photoinduced processes, two spacers consisting of amino and carboxylic groups separated by a cyclic or a long linear hydrocarbon chain (1 and 2, respectively) have been used to link the (S)- or (R)-FBP with the (S)-Trp moieties. The main feature observed in the dyads was a strong intramolecular quenching of the fluorescence, which was more important for the (S,S)- than for the (R,S)- diastereomer in dyads 1, whereas the reverse was true for dyads 2. This was consistent with the results obtained by simple molecular modelling (PM3). The observed stereodifferentiation in (S,S)-1 and (R,S)-1 arises from the deactivation of (1)Trp*, while in (S,S)-2 and (R,S)-2 it is associated with (FBP)-F-1*. The mechanistic nature of (FBP)-F-1* quenching is ascribed to energy transfer, while for (1)Trp* it is attributed to electron transfer and/or exciplex formation. These results are consistent with those obtained by ultrafast transient absorption spectroscopy, where (FBP)-F-1* was detected as a band with a maximum at ca. 425 nm and a shoulder at similar to 375 nm, whereas Trp did not give rise to any noticeable transient. Interestingly, similar photoprocesses were observed in the dyads and in the supramolecular FBP@HSA complexes. Overall, these results may aid to gain a deeper understanding of the photoinduced processes occurring in protein-bound drugs, which may shed light on the mechanistic pathways involved in photobiological damage., Grant PID2020-115010RB-I00 funded by MCIN/AEI/10.13039/501100011033 and grant from Conselleria d'Innovacio, Universitats, Ciencia i Societat Digital (CIAICO/2021/061) are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Strategical and tactical supply chain optimisation for smart production planning and control 4.0

  • Cañas-Sánchez, Hector Enrique
  • Campuzano-Bolarín, Francisco
  • Mula, Josefa|||0000-0002-8447-3387
[EN] Industry 4.0 (I4.0) technologies generate new opportunities for developing smart models, algorithms and tools to support supply chain (SC) production planning and control (PPC), or smart PPC (SPPC 4.0). Paired with opportunities, challenges arise in integrating sustainability and resilience in SC network design (SCND) according under I4.0. The main novelty of this paper is to propose two multi-objective models that integrate strategical and tactical PPC decisions into a sustainable-resilient SC under I4.0 towards SPPC 4.0. Sustainability is incorporated in terms of reducing costs and CO2 emissions, and a job creation factor. Resilience is incorporated in terms of contracting support suppliers. To solve the multi-objective models, the augmented epsilon constraint method (AUGMECON) was used. This algorithm minimises a target objective function while it treats the others as constraints. Our experiments indicate that AUGMECON is sensitive to the choice of epsilon values. Furthermore, a synthetic data generation tool called SR1-SR2_SynthDataGenerator was developed. This tool generates input datasets to validate and evaluate our models against benchmarks. A stochastic model (SR2) is also proposed that, with small datasets, takes 8.39 seconds to solve. The proposed models can be useful for industries that seek sustainable and resilient SCs to adapt to changing environments., The research that has led to the present results has received funding from: the MCIN/AEI/10.13039/501100011033 and by European Union Next GenerationEU/PRTR with grant agreement PDC2022-133957-I00); and the Regional Department of Innovation, Universities, Science and Digital Society of the Generalitat Valenciana entitled 'Industrial Production and Logistics Optimization in Industry 4.0' (i4OPT) (Ref. PROMETEO/2021/065); and from the European Union Horizon Europe program under grant agreements No. 101070076 'Optimizing Production and Logistic Resources in the Time-critical Bio Production Industries in Europe' (CLARUS) and No. 101057294 'AI Driven Industrial Equipment Product Life Cycle Boosting Agility, Sustainability and Resilience' (AIDEAS).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MOF-Triggered Synthesis of Subnanometer Ag02 Clusters and Fe3+ Single Atoms: Heterogenization Led to Efficient and Synergetic One- Pot Catalytic Reactions

  • Tiburcio, Estefanía
  • Zheng, Yongkun
  • Bilanin-Artigado, Cristina
  • Hernández-Garrido, Juan Carlos
  • Martín-García, Nuria
  • Ferrando-Soria, Jesus
  • Armentano, Donatella
  • Pardo, Emilio
  • Vidal Moya, José Alejandro
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Mon-Conejero, Marta|||0000-0002-1983-1096
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] The combination of well-defined Fe3+ isolated single-metal atoms and Ag2 subnanometer metal clusters within the channels of a metal¿organic framework (MOF) is reported and characterized by single-crystal X-ray diffraction for the first time. The resulting hybrid material, with the formula [Ag02(Ag0)1.34FeIII0.66]@NaI2{NiII4[CuII2(Me3mpba)2]3}·63H2O (Fe3+Ag02@MOF), is capable of catalyzing the unprecedented direct conversion of styrene to phenylacetylene in one pot. In particular, Fe3+Ag02@MOF¿which can easily be obtained in a gram scale¿exhibits superior catalytic activity for the TEMPO-free oxidative cross-coupling of styrenes with phenyl sulfone to give vinyl sulfones in yields up to >99%, which are ultimately transformed, in situ, to the corresponding phenylacetylene product. The results presented here constitute a paradigmatic example of how the synthesis of different metal species in well-defined solid catalysts, combined with speciation of the true metal catalyst of an organic reaction in solution, allows the design of a new challenging reaction., This work was supported by the MICINN (Spain) (Projects PID2019-104778GB-I00, PID2020-115100GB-I00, and Ex-cellence Unit "Maria de Maeztu" CEX2019-000919-M) . This work was been funded by Generalitat Valenciana, Prometeo Grupos de Investigacion de Excelencia (PROMETEU/2021/054) and GV/emergentes (GV/2021/138) . D. A . also acknowl-edges the financial support of the European Union-NextGenerationEU under the National Recovery and Resil-ience Pla n (NRRP) of Ministero dell'Universita ` e della Ricerca (MUR) (Project code PE0000021, "Network 4 Energy Sustainable Transition-NEST) . Thanks are also extended to the 2019 Post-doctoral Junior Leader-Retaining Fellowship, la Caixa Foundation (ID100010434 and fellowship code LCF/BQ/PR19/11700011) , the "Generalitat Valenciana" (SEJI/2020/034) , and the "Ramon y Cajal" program (RYC2019-027940-I) (J.F.-S.) . E.P. acknowledges the financial support from the European Research Council under the European Union's Horizon 2020 research and innovation programme/ERC Grant Agreement No 814804, MOF-reactors. M.M., N.M., and J.O.-M. acknowledge MICIIN from a contract under the Juan de la Cierva program (FJC2019-040523-I, FJC2018-035455-I, and IJC2018-036514-I, respectively) . E.T. thanks the MICINN for a PhD FPI grant. Y.Z. tha n k s the China Scholarship Council (CSC No: 202009350009) for a Ph.D. fellowship. C.B. thanks ITQ for a contract. We acknowledge ALBA Synchrotron for allocating beamtime and CLAESS beamline staff, especially Dr. Carlo Marini , for their technical support during our experiment. This study forms part of the Advanced Materials programme (MFA/2022/048) and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Online poster presentation vs. Onsite. An experience in the pandemic context at undergraduate level

  • Heredia Gutiérrez, Ana Belén|||0000-0001-6629-9779
  • Seguí Gil, Lucía|||0000-0002-2711-9445
  • Barrera Puigdollers, Cristina|||0000-0003-4408-3541
  • Castelló Gómez, María Luisa|||0000-0002-4889-1792
  • García Hernández, Jorge|||0000-0003-1258-6128
[EN] At present, the whole world is facing the COVID-19 pandemic and its impact on heath, economics, society, as well as on all education levels. The pandemic has driven an unexpected change from onsite delivery to courses fully or partially delivered online. As a consequence, development and evaluation of the competences defined for each degree will also be affected by these changes, for which activities and methodologies will need to be re-defined and evaluation processes adapted. Oral poster presentation is a learning experience through which students are invited to acquire both specific and transversal competences which are important in a scientific career. To this aim, oral poster presentation has been part of a ¿scientific congress simulation¿ experience in which students of 4th year of Degree in Biotechnology are involved yearly as part of the course ¿Bioprocess and bioproducts¿ (Escuela Técnica Superior de Ingeniería Agronómica y del Medio Natural, Universitat Politècnica de València). Previous years results have confirmed that through this experience students develop specific and transversal competences related to the biotechnologist research profile such as data basis searching, synthesis of information, results interpretation, deadline accomplishment and time management, as well as oral communicative skills. Due to the current situation, an online version of this activity has been piloted during the academic year 2020-21 with the aid of Microsoft Teams. Presential follow-up by teachers has been replaced by regular face-to-face virtual meetings with each student team. Microsoft Teams has also been used as a platform where uploading students¿ deliverables (index of contents, abstract including the entailment of the topic with the sustainable development goals, poster and screencast files). Each student team was asked to record a 5-min screencast to be visualized in a synchronic virtual poster session in front of a panel of experts of three different areas: Food biotechnology, Environmental biotechnology, and Biomedicine. Not only poster presentation, but also interaction with the experts after screencast visualization were considered for the assessment. For the latter, rubrics were specifically developed and shared with the panel of experts. This contribution aims to present the main results of this experience by analyzing the advantages and disadvantages of moving this activity from onsite to online, considering both students and teachers perceptions regarding development of the activity, quality of the results, as well as impact on assessment and competence development., The authors also thank UPV for financial support through the project PIME/20-21/208 "Aprendizaje Basado en Retos: una contribución a la adquisición significativa de competencias profesionales (transversales y específicas) del ámbito agroalimentario y biotecnológico".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solving the time capacitated arc routing problem under fuzzy and stochastic travel and service times

  • Martín, Xabier A.
  • Panadero, Javier
  • Peidro Payá, David|||0000-0001-8678-6881
  • Pérez Bernabeu, Elena|||0000-0002-9221-7623
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] Stochastic, as well as fuzzy uncertainty, can be found in most real-world systems. Considering both types of uncertainties simultaneously makes optimization problems incredibly challenging. In this paper we propose a fuzzy simheuristic to solve the Time Capacitated Arc Routing Problem (TCARP) when the nature of the travel time can either be deterministic, stochastic or fuzzy. The main goal is to find a solution (vehicle routes) that minimizes the total time spent in servicing the required arcs. However, due to uncertainty, other characteristics of the solution are also considered. In particular, we illustrate how reliability concepts can enrich the probabilistic information given to decision-makers. In order to solve the aforementioned optimization problem, we extend the concept of simheuristic framework so it can also include fuzzy elements. Hence, both stochastic and fuzzy uncertainty are simultaneously incorporated into the CARP. In order to test our approach, classical CARP instances have been adapted and extended so that customers' demands become either stochastic or fuzzy. The experimental results show the effectiveness of the proposed approach when compared with more traditional ones. In particular, our fuzzy simheuristic is capable of generating new best-known solutions for the stochastic versions of some instances belonging to the tegl, tcarp, val, and rural benchmarks., Spanish Ministry of Science, Grant/Award Number: PID2019-111100RB-C21/AEI/10.13039/501100011033; Barcelona Council and the "la Caixa" Foundation under the framework of the Barcelona Science Plan 2020-2023, Grant/Award Number: 21S09355-001; Generalitat Valenciana,Grant/Award Number: PROMETEO/2021/065
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Extending the Framework for Developing Intelligent Virtual Environments (FIVE) with Artifacts for Modeling Internet of Things Devices and a New Decentralized Federated Learning Based on Consensus for Dynamic Networks

  • Rebollo Pedruelo, Miguel|||0000-0002-5115-8751
  • Hérnandez López, Luís|||0000-0001-9011-0542
  • Enguix-Andrés, Francisco|||0009-0002-8144-318X
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
  • Rincon, Jaime Andres
[EN] One of the main lines of research in distributed learning in recent years is the one related to Federated Learning (FL). In this work, a decentralized Federated Learning algorithm based on consensus (CoL) is applied to Wireless Ad-hoc Networks (WANETs), where the agents communicate with other agents to share their learning model as they are available to the wireless connection range. When deploying a set of agents, it is essential to study whether all the WANET agents will be reachable before the deployment. The paper proposes to explore it by generating a simulation close to the real world using a framework (FIVE) that allows the easy development and modification of simulations based on Unity and SPADE agents. A fruit orchard with autonomous tractors is presented as a case study. The paper also presents how and why the concept of artifact has been included in the above-mentioned framework as a way to highlight the importance of some devices used in the environment that have to be located in specific places to ensure the full connection of the system. This inclusion is the first step to allow Digital Twins to be modeled with this framework, now allowing a Digital Shadow of those devices., This work has been developed thanks to the funding of projects: Grant PID2021-123673OBC31 funded by MCIN/AEI/ 10.13039/ 501100011033 and by ERDF A way of making Europe , PROMETEO CIPROM/ 2021/077, TED2021-131295B-C32 and Ayudas del Vicerrectorado de Investigacion de la UPV (PAID-PD-22).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dynamic Reactive Assignment of Tasks in Real-Time Automated Guided Vehicle Environments with Potential Interruptions

  • Martín, Xabier A.
  • Hatami, Sara
  • Calvet, Laura
  • Peyman, Mohammad
  • Juan, Angel A.|||0000-0003-1392-1776
[EN] An efficient management of production plants has to consider several external and internal factors, such as potential interruptions of the ongoing processes. Automated guided vehicles (AGVs) are becoming a widespread technology that offers many advantages. These AGVs can perform complex tasks in an autonomous way. However, an inefficient schedule of the tasks assigned to an AGV can suffer from unwanted interruptions and idle times, which in turn will affect the total time required by the AGV to complete its assigned tasks. In order to avoid these issues, this paper proposes a heuristic-based approach that: (i) makes use of a delay matrix to estimate circuit delays for different daily times; (ii) employs these estimates to define an initial itinerary of tasks for an AGV; and (iii) dynamically adjusts the initial agenda as new information on actual delays is obtained by the system. The objective is to minimize the total time required for the AGV to complete all the assigned tasks, taking into account situations that generate unexpected disruptions along the circuits that the AGV follows. In order to test and validate the proposed approach, a series of computational experiments utilizing real-life data are carried out. These experiments allow us to measure the improvement gap with respect to the former policy used by the system managers., This work has been partially supported by the Spanish Ministry of Industry, Commerce and Tourism (AEI-010500-2021b-54), the EU Comission (HORIZON-CL4-2021-TWIN-TRANSITION-01-07, 101057294 AIDEAS), and the Generalitat Valenciana (PROMETEO/2021/065).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An approach for the indirect determination of 238U and 232Th content in ceramic products based on gross alpha and gross beta measurement

  • Sáez-Muñoz, Marina|||0000-0003-0180-7167
  • Sánchez Galdón, Ana Isabel|||0000-0002-3159-8020
  • Pérez-Baeza, Mireia
  • Martorell Alsina, Sebastián Salvador|||0000-0003-1706-4740
  • Sevilla, A. J.
  • Ortiz Moragón, Josefina
[EN] The aim of this work was the development of a procedure for the indirect characterization of 238U and 232Th in ceramic products using the quantification of gross alpha and gross beta activities in a low background proportional counter, which is less time consuming and cheaper than the direct radiochemical methods and gamma spectrometry. The procedure was applied, first, to a reference material used to fine-tune the procedure and statistical techniques, and then, for two types of ceramic products: micronized zircon and zircon flour samples, and spray-dried ceramic powders (atomized). This procedure requires obtaining linear regression models for estimating the activity of 238U and 232Th as a function of specific gross alpha and gross beta measurements. Regression models must be obtained for each type of ceramic material together with the range of application of the model, which depend primarily on the ratio between 238U and 232Th activities. The applications to micronized zircon and zircon flours, and spray-dried ceramic powders demonstrated that the models obtained for the indirect characterization of 238U and 232Th activities explain more than 95% of the variability in the data. In addition, those models were used for predicting the results of new validation samples. Regarding the micronized zircon and zircon flours, predictions were good for the 238U activity with a relative bias of less than 10%, while they were not so accurate for the 232Th activity, with a relative bias of less than 15% for most of the samples. For spray-dried ceramic powders, the predictions were quite good for the 238U activity with a relative bias of less than 20% irrespective of the cluster to which the validation sample belongs, and similarly for the 232Th activity., The authors are grateful to the Generalitat Valenciana for the financial support received by funding the projects "Characterization and radiological measurement of suspended dust in the ceramic industry of the Valencian Region" (AICO/2020/106) and "Assessment of the radiological impact due to the presence of radioactive material in sus- pension in activities of the Valencian ceramic industry" (CIAICO/2021/290) . As well as to the FEDER funds (IDIFER/2021/047) for the support through grants for R & D & I infrastructure and equipment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Groups with triangle-free graphs on p-regular classes

  • Felipe Román, María Josefa|||0000-0002-6699-3135
  • Jean-Philippe, M.K.
  • Sotomayor, V.
[EN] Let p be a prime. In this paper, we classify the p-structure of those finite p-separable groups such that, given any three non-central conjugacy classes of p-regular elements, two of them necessarily have coprime lengths., The first and last authors are supported by Ayuda a Primeros Proyectos de Investigación (PAID-06-23) from Vicerrectorado de Investigación de la Universitat Politècnica de València (UPV), and by Proyecto CIAICO/2021/163 from Generalitat Valenciana (Spain). The results in this paper are part of the second author s Ph.D. thesis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Controlling Selectivity at the First Hydrogenation Level: Synthesis of 3-Hydroxyisoindolines by Heterogeneously Silver-Catalyzed Monohydrogenation of Phthalimides

  • Lluna-Galán, Carles
  • Adam, Rosa
  • Cabrero Antonino, Jose Ramón|||0000-0001-9628-9803
[EN] The development of robust nanocatalysts able to mediate important organic transformations with high levels of selectivity constitutes a hot topic in fine-chemistry and catalysis fields. In this context, the rational design of heterogeneous catalysts featuring suitable active sites for obtaining 3-hydroxyisoindolinones by the direct monohydrogenation of highly accessible phthalimides is an attractive approach. This work presents the design and successful catalytic application of a robust and recyclable [Ag/Al2O3] nanomaterial capable to promote the synthesis of a wide range of 3-hydroxylactams through the catalytic monohydrogenation of phthalimides with total atom-economy. It is important to remark that this transformation proceeds with full chemoselectivity, exhibiting complete tolerance to the presence of (hetero)aromatic rings and being able to stop the hydrogenation at the first intermediate level. A deep effort concerning material catalyst optimization and characterization study are performed, determining that the optimal [Ag/Al2O3] is composed of silver nanoparticles with an overall size of 2.3 nm homogeneously distributed across the alumina matrix. The characterization together with the performance of kinetic/mechanistic investigations allows to propose an intimate contact between accessible Ag0 sites and Lewis acidic centers is crucial for the catalyst system to perform the hydrogenative process with complete efficiency., This work was supported by the Generalitat Valenciana through SEJI (Subvencions Excelencia Juniors Investigadors, grants SEJI/2019/006 and SEJI/2020/013) and PROMETEO/2021/077 programs and the RETOS I+D+I program from MICINN (PID2019-109656RA-I0/AEI/10.13039/501100011033). The work was also supported by the Spanish Government via the CNS2024-154828 grant funded by MICIU/AEI/10.13039/501100011033 and CNS2023-144172 grant funded by MICIU/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR. Financial support by the Spanish Ministry of Science and Innovation (CEX2021-001230-S grant funded by MCIN/AEI/10.13039/501100011033) is also gratefully acknowledged. J.R.C.-A. and R.A. thank MICINN (Spanish Government) for two Ramon y Cajal contracts (ref. RYC-2017-22717 and RYC2020-029493-I).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Topology and Excited State Multiplicity as Controlling Factors in the Carbazole-Photosensitized CPD Formation and Repair

  • Rodríguez Muñiz, Gemma María|||0000-0001-8989-2401
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Marín García, Mª Luisa|||0000-0002-9789-8894
  • Gómez-Mendoza, Miguel
  • Miró, Paula
  • García-Orduña, Pilar
  • Miranda Alonso, Miguel Ángel
[EN] Photosensitized thymine<>thymine (Thy<>Thy) formation and repair can be mediated by carbazole (Cbz). The former occurs from the Cbz triplet excited state via energy transfer, while the latter takes place from the singlet excited state via electron transfer. Here, fundamental insight is provided into the role of the topology and excited state multiplicity, as factors governing the balance between both processes. This has been achieved upon designing and synthesizing different isomers of trifunctional systems containing one Cbz and two Thy units covalently linked to the rigid skeleton of the natural deoxycholic acid. The results shown here prove that the Cbz photosensitized dimerization is not counterbalanced by repair when the latter, instead of operating through-space, has to proceed through-bond., Financial support from the Spanish Government (grant SEV- 2016-0683) , Generalitat Valenciana (PROMETEO/2017/075 and PROMETEO/2021/077) , and Technical University of Valencia (Predoctoral FPI fellowship for P.M.) is gratefully acknowledged. G.S. thanks CTI-CSIC for the use of computa- tional facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis de maestría (MasterThesis)

Análisis del comportamiento a flexión a temperatura ambiente y en situación de incendio de vigas mixtas acero-hormigón con conectores desmontables, Analysis of the flexural behaviour at room temperature and in the fire situation of steel-concrete composite beams with demountable shear connectors, Anàlisi del comportament a flexió a temperatura ambient i en situació d&apos, incendi de bigues mixtes acer-formigó amb connectors desmuntables

  • Paúl Sebastián
[ES] En el presente Trabajo Fin de Máster se estudia mediante simulaciones numéricas y cálculos analíticos el comportamiento a flexión de vigas mixtas acero-hormigón con conectores de rasante desmontables, para cuyo fin se toman como referencia los estudios experimentales realizados a temperatura ambiente y elevada en el marco del proyecto de investigación FIREDUCE en la Universitat Politècnica de València, así como otros resultados experimentales previos disponibles en la bibliografía revisada. Para su comportamiento como elementos mixtos, las vigas acero-hormigón requieren de elementos de conexión denominados conectores de rasante, siendo típicamente utilizados los pernos soldados al ala superior de la viga, garantizando un alto grado de conexión a rasante. Esto resulta favorable en términos de eficiencia estructural, sin embargo, dificulta la posibilidad de separar la losa de hormigón del perfil de acero cuando la estructura haya cumplido su vida útil o en caso de demolición. Una buena solución a este problema es un nuevo sistema de conectores desmontables recientemente introducido en el mercado y que se ha venido estudiando en los últimos años, consiguiendo buenos resultados. Este nuevo tipo de conectores atornillados, contribuyen al concepto de economía circular gracias a la reducción de emisiones de carbono por el reciclaje y/o posible reutilización de sus componentes. Actualmente se cuenta con varios estudios sobre el comportamiento de vigas mixta acero-hormigón con conectores a rasante desmontables a temperatura ambiente, no obstante, se desconoce su comportamiento en condiciones de incendio. El acero pierde rápidamente sus propiedades mecánicas ante la acción del fuego, convirtiendo en importante el estudio a temperatura elevada de esta tipología de vigas mixtas, siendo necesario generalizar los resultados a diferentes grados de acero, resistencias del hormigón, dimensiones seccionales, diversas estrategias de protección, etc. Dado el elevado coste de los ensayos experimentales, resulta conveniente obtener estos resultados a través de simulaciones numéricas, capaces de proporcionar información detallada y precisa. Para el desarrollo del modelo numérico objeto del presente trabajo, se emplea el programa comercial de análisis no lineal Abaqus, el cual emplea el método de los elementos finitos, permitiendo introducir el comportamiento mecánico de los materiales a diferentes temperaturas, así como los diferentes mecanismos de transmisión de calor, el modelado de los conectores de rasante a diferentes temperaturas, entre otros aspectos. Tras la validación del modelo numérico por comparación con los ensayos experimentales de referencia, se comprueba la aplicabilidad de las ecuaciones de diseño descritas en la normativa europea y la bibliografía revisada, y se propone una extensión de las mismas para el cálculo a temperatura elevada de las vigas mixtas acero-hormigón con conectores desmontables, transferible a la industria de la construcción., [EN] In this Master's Thesis, the flexural behavior of steel-concrete composite beams with demountable shear connectors is studied through numerical simulations. The reference for this study is based on experimental research conducted at room and elevated temperature as part of the FIREDUCE research project at the Universitat Politècnica de València, along with other previous experimental investigations available in the literature. For their composite behavior, steel-concrete beams require a connecting element known as shear connector, which is typically materialized by means of bolts welded to the upper flange of the beam,ensuring a high degree of shear connection. This proves advantageous in terms of structural efficiency; however, it difficult the separation of the concrete slab from the steel beam when the structure reaches the end of its service life or in the case of demolition. A viable solution to this problem is a recently introduced system of demountable shear connectors that has been under study in recent years, yielding positive results. This novel type of bolted connector contributes to the concept of circular economy through the reduction of carbon emissions via recycling and/or the potential reuse of its components. Currently, there are several studies on the behavior of steel-concrete composite beams with demountable shear connectors at room temperature. However, their performance under fire conditions is unknown. Steel rapidly loses its mechanical properties when exposed to fire, making it crucial to study this type of composite beams at elevated temperatures, being much needed to generalize the results to different steel grades, concrete strengths, sectional dimensions, various protection strategies, etc. Due to the high cost of experimental tests, obtaining these results through numerical simulations is advisable, as they can provide detailed and precise information. For the development of the numerical model aimed in this study, the commercial nonlinear analysis program Abaqus is employed. This program is makes use of the finite element method, allowing for the modeling of material constitutive behavior at different temperatures, various heat transfer mechanisms, and the behavior of shear connectors at different temperatures, among other aspects. After validating the numerical model by comparison with the reference experimental tests, the applicability of the design equations described in the European standards and the revised literature is verified, and an extension is proposed for the elevated temperature design of steel-concrete composite beams with demountable shear connectors, which can be transferred to the construction industry.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Folate- and aCD47-functionalized lipid nanoparticles efficiently deliver mRNA and remodel pancreatic tumor microenvironment

  • Parés, Marta
  • Pallaruelo-Santamaría, Víctor
  • Fillat, Cristina
  • Martínez-Latorre, Javier|||0000-0001-5421-5371
  • Candela-Noguera, Vicente
  • Soriano-Teruel, Paula
  • García-Fernández, Alba|||0000-0002-8416-1674
  • Aznar, Elena|||0000-0003-0361-3876
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
[EN] Abstract: Pancreatic ductal adenocarcinoma (PDAC) remains one of the most aggressive and treatment-resistant malignancies, with limited efficacy to conventional treatments such as surgical resection or chemotherapy. This clinical scenario underscores the need for novel therapeutic strategies. The development of multifunctional platforms capable of targeting tumors through multiple mechanisms offers an innovative strategy to overcome this challenge. Lipid nanoparticles (LNPs) offer a versatile platform capable of efficiently delivering genetic material. Moreover, through surface functionalization it is feasible to improve LNP performance optimizing therapeutic outcomes in a single formulation. Here, we explored a dual functionalization strategy of the LNP for tumor targeting and tumor remodeling to improve treatment efficacy. LNPs were designed for delivering reporter DNA plasmid or mRNA into the PDAC cellular models Capan-2 and PANC-1. The DNA plasmid contains a pancreatic cancer-specific chimeric promoter for transcriptional specificity to PDAC cells. Besides, LNPs were functionalized with folate and an anti-CD47 antibody to both target the folate receptor in PDAC cells and block CD47-mediated immune evasion. Both pDNA and mRNA LNPs targeted PDAC cells in a dose-dependent manner, with mRNA-LNPs demonstrating more efficient transfection. Notably, LNPs functionalized with the anti-CD47 antibody increased phagocytosis in vitro, and promoted an inflammatory phenotype of M1-like macrophages in mouse Capan-2 xenografts. This combinatorial design of the formulated LNP represents an innovative therapeutic strategy and opens future perspectives in the search for effective treatments for PDAC. Keywords: Lipid nanoparticles; Immunotherapy; ACD47; Folate; Macrophages; Pancreatic cancer, This research was supported by European Union s Horizon 2020 research and innovation programme under grant agreement No 899708 (ULISES). The work has also received funding from projects PID2020- 119692RB-C22, PID2023-146637OB-C22, PID2021-128141OBC22, PID2021-126304OB-C41 and PID2024-155683OB-C41 funded by MCIN-Ministerio de Ciencia e Innovacion ¿ and by the European Regional Development Fund A way of doing Europe. This study was also supported by the ERC Advanced Grant Edison (101052997), the Generalitat Valenciana (CIPROM/2021/007) and CIBER (CB06/01/2012) and (RD21/0017/0012) Instituto de Salud Carlos III, the Generalitat de Catalunya (SGR21/01169). The research leading to these results has also received funding from la Caixa Foundation under agreement LCF/PR/ SP23/52950009. The Views and opinions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union or European Research Council. Neither the European Union nor the granting authority can be held responsible for them. J.M-L. is grateful to the Spanish MECD for his FPU grant (FPU19/06219). PM.S-T. is grateful to the Generalitat Valenciana for a postdoctoral Investigo contract (INVEST/2023/443). We also acknowledge the support of CERCA Programme/Generalitat de Catalunya.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Moving Beyond Oxford Nanopore Standard Procedures: New Insights from Water and Multiple Fish Microbiomes

  • Domingo-Bretón, Ricardo
  • Moroni, Federico
  • Toxqui-Rodriguez, Maria del Socorro
  • Belenguer, Álvaro
  • Piazzon, M.Carla
  • Pérez-Sánchez Jaume
  • Naya-Català, Fernando
[EN] Oxford Nanopore Technology (ONT) allows for the rapid profiling of aquaculture microbiomes. However, not all the experimental and downstream methodological possibilities have been benchmarked. Here, we aimed to offer novel insights into the use of different library preparation methods (standard-RAP and native barcoding-LIG), primers (V3-V4, V1-V3, and V1-V9), and basecalling models (fast-FAST, high-HAC, and super-accuracy-SUP) implemented in ONT to elucidate the microbiota associated with the aquatic environment and farmed fish, including faeces, skin, and intestinal mucus. Microbial DNA from water and faeces samples could be amplified regardless of the library-primer strategy, but only with LIG and V1-V3/V1-V9 primers in the case of skin and intestine mucus. Low taxonomic assignment levels were favoured by the use of full-length V1-V9 primers, though in silico hybridisation revealed a lower number of potential matching sequences in the SILVA database, especially evident with the increase in Actinobacteriota in real datasets. SUP execution allowed for a higher median Phred quality (24) than FAST (11) and HAC (17), but its execution time (6-8 h) was higher in comparison to the other models (0.6-7 h). Altogether, we optimised the use of ONT for water- and fish-related microbial analyses, validating, for the first time, the use of the LIG strategy. We consider that LIG-V1-V9-HAC is the optimal time/cost-effective option to amplify the microbial DNA from environmental samples. However, the use of V1-V3 could help to maximise the dataset microbiome diversity, representing an alternative when long amplicon sequences become compromised by microbial DNA quality and/or high host DNA loads interfere with the PCR amplification/sequencing procedures, especially in the case of gut mucus., This work was supported by the EU H2020 AQUAEXCEL3.0 Project (871108). Additionally, this study forms part of the ThinkInAzul program and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (THINKINAZUL/2021/024).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Integrated computational modeling of large format additive manufacturing: Developing a digital twin for material extrusion with carbon fiber-reinforced acrylonitrile butadiene styrene

  • Castelló-Pedrero, Pablo|||0000-0002-6927-6430
  • García-Gascón, César|||0009-0007-6772-0474
  • Javier Bas-Bolufer
  • García Manrique, Juan Antonio|||0000-0001-9507-0746
[EN] Material extrusion (MEX) continues to be a pivotal additive manufacturing (AM) process, involving the selective heating and layer-by-layer deposition of material. However, conventional finite-element models (finite-element analysis) face limitations in accurately simulating the MEX process, highlighting the need for experimental validation. This paper highlights an advanced material modeling technology that streamlines the development of composite parts using large format AM (LFAM). It specifically focuses on a thermoplastic acrylonitrile butadiene styrene (ABS) matrix composite material enriched with 20% short carbon fibers. The study employs integrated computational materials engineering, integrating (i) the manufacturing process, (ii) the material¿s microstructure, (iii) homogenization techniques, and (iv) the performance of the final part. The development of a digital twin for pellet extrusion is proposed, emphasizing the importance of micro-structure characterization to account for warpage and residual stresses that lead to part distortion. The demonstrator manufactured for this study is a wind turbine mold of a blade section. Experimental tests revealed an elastic modulus of 5.5¿GPa and a hardening modulus of 2.4¿GPa for the composite. The numerical microscopic model showed a 16% error in the elastic modulus compared to experimental results. The study concludes that the homogenization techniques are effective in predicting the elastic properties but lack accuracy in the plastic region. The application of the model to the LFAM process of pellet extrusion is demonstrated, with simulation results showing a maximum deformation close to the center of the wind turbine blade mold., This work was supported by Generalitat Valencia (GVA) and the Spanish Ministry of Science and Innovation (INVEST/2022/131, CIACIF/2021/286, IDIFEDER/2021/040, TED2021-130879B-C21 and PID2019-108807RB-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient NiFe-Layered Double Hydroxide Electrocatalyst Synthesized via a Solvent-Free Mechanochemical Method for Oxygen Evolution Reaction

  • Molina-Muriel, Manuel
  • Campagna Zignani, Sabrina
  • Ribera, Antonio
  • Aricò, Antonino Salvatore
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The growing concern over climate change and the reliance on fossil fuels has spurred interest in alternative energy processes, particularly electrochemical water splitting to produce hydrogen (H2). This study focuses on developing cost-effective and efficient oxygen evolution reaction (OER) electrocatalysts. We report a novel solvent-free mechanochemical method for synthesizing NiFe-layered double hydroxide (LDH), which demonstrates promising electrocatalytic properties for the OER. The mechanochemical synthesis, requiring only 1 h of solid reagent grinding, produces NiFe-LDH with structural features comparable to those obtained via traditional aqueous phase methods. The electrocatalyst was evaluated in a single cell with a membrane-electrode assembly configuration under alkaline conditions, exhibiting an overpotential of 221 mV at a current density of 10 mA<middle dot>cm-2 and a Tafel slope of 103.1 mV<middle dot>dec-1, indicating excellent OER kinetics and low energy barriers. Additionally, the catalyst demonstrated robust durability, maintaining a potential of around 1.55 V during a 35 h test at high current densities of 0.1 A<middle dot>cm-2 and even 1.75 V at 1 A<middle dot>cm-2. This work highlights the potential of NiFe-LDH synthesized by an energy-efficient, environmentally green, and scalable process for large industrial water-splitting applications, contributing to the advancement of sustainable hydrogen production technologies., The authors acknowledge the financial support provided by the EU H2020 GREEN DEAL "ECO2FUEL" project "Large-scale low-temperature electrochemical CO2 conversion to sustainable liquid fuels" Grant Agreement number: 101037389. Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PID2021-0126071-OB-CO21, and PID2021-125907NB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER) and Generalitat Valenciana (Prometeo 2021-038, CIPROM-2022-60, and Advanced Materials Program MFA-2022-023 and MFA-2022-057 with funding from European Union Next Generation EU PRTR-C17.I1) are gratefully acknowledged. M.M. thanks the Universitat Politecnica de Valencia for a postgraduate scholarship. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Valorisation of Sea Bream By-Products Through Its Inclusion in Fish and Shrimp Burgers

  • Sara Pinar
  • Fuentes López, Ana|||0000-0002-4144-2396
  • Barat Baviera, José Manuel|||0000-0001-8487-7114
  • Fernández Segovia, Isabel|||0000-0002-7641-2680
  • Martínez, María Isabel
[EN] The aim of this work was to introduce the by-products generated by the sea bream processing industry as a new ingredient in the production of fish and seafood burgers. Fish by-product flour was obtained and added in the preparation of sea bream and shrimp burgers. The formulations selected from a sensory evaluation with semi-trained assessors were burgers with sea bream and shrimp (C) and the same sample with 10% of by-product flour (BP10). These formulations were subjected to sensory evaluation with consumers using hedonic scales. Both samples had a good acceptability, although the presence of by-products had a negative impact on the colour, resulting in a slight decrease in the global acceptance. It would be interesting to use a natural ingredient that could improve the colour of the product or use the by-product flour in battered products where the colour could be masked., This study was developed within the ThinkInAzul Program financed by the MCIN with funds from the European Union NextGenerationEU (PRTR-C17.I1) and by the Generalitat Valenciana (GVA-THINKINAZUL/2021/004).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A modeling framework for predicting the effect of the operating conditions and component sizing on fuel cell degradation and performance for automotive applications

  • Desantes J.M.|||0000-0002-4124-9393
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • Pla Moreno, Benjamín|||0000-0001-9238-2939
  • López-Juárez, Marcos|||0000-0001-9886-4728
[EN] In this study, durability and performance prediction were integrated in the sizing process of the FC stack of a fuel cell range-extender (FCREx) vehicle together with the design of a dynamics-limited control strategy. For that purpose, a FCREx vehicle model integrating a FC stack, balance of plant, battery, H-2 tank and vehicle body (C-class SUV) validated in previous studies was used. To predict FC stack degradation rate, a novel semi-empirical multi-layered degradation modeling framework for automotive application is proposed and developed. Degradation rates are calculated based on reference degradation rates measured at reference and known conditions (1st layer) and scaled with the electrochemical phenomena (2nd layer) and the operating conditions (3rd layer) through scaling functions based on physical tendencies. Results show how increasing the FC stack power decreases H-2 consumption but increases durability, while increasing the dynamic limitations on the control strategy increases both H-2 consumption and durability. The isolated effect of sizing implied a decrease in H-2 consumption of-3% and an increase in FC stack durability of similar to 53% when comparing the 40 kW and 100 kW designs. In contrast, the effect of dynamic limitations was significantly perceived in the 40 kW design which implied an increase in H-2 consumption close to 8% and an increase in durability of 294% when comparing the infinite dynamics and the highest dynamically restricted cases. Nevertheless, the effect of sizing is neglected under high dynamic limitation and limiting the current density change rate to 0.001 A/cm(2) s may prevent the control strategy from fulfilling the charge sustaining mode in aggressive driving. Based on these results, a set of recommendations were elaborated for FC stack and FCV manufacturers aiming to apply FCREx architecture to passenger car vehicles., This research has been partially funded by the Spanish Ministry of Science, Innovation, and University through the University Faculty Training (FPU) program (FPU19/00550) and FEDER and the Generalitat Valenciana, Consellera dInnovaci, Universitats, Ciencia i Societat Digital through project IDIFEDER/2021/039.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Demonstration of neutrinoless double beta decay searches in gaseous xenon with NEXT

  • Novella, P.
  • Sorel, M.
  • Usón, A.
  • Adams, C.
  • Almazán, H.
  • Aparicio, B.
  • Aranburu, A. I.
  • Arazi, L.
  • Arnquist, I.J.
  • Auria-Luna, F
  • Ayet, S.
  • C.D.R. Azevedo
  • Bailey, K.
  • Rodriguez-Samaniego, Javier
  • Álvarez-Puerta, Vicente|||0000-0001-6938-8259
  • Ballester Merelo, Francisco José|||0000-0002-2464-5116
  • Esteve Bosch, Raul|||0000-0002-1289-6938
  • Herrero Bosch, Vicente|||0000-0003-0860-2789
  • Mora Mas, Francisco José|||0000-0003-2281-9546
  • Toledo Alarcón, José Francisco|||0000-0002-9782-4510
[EN] The NEXT experiment aims at the sensitive search of the neutrinoless double beta decay in Xe-136, using high-pressure gas electroluminescent time projection chambers. The NEXT-White detector is the first radiopure demonstrator of this technology, operated in the Laboratorio Subterr & aacute;neo de Canfranc. Achieving an energy resolution of 1% FWHM at 2.6 MeV and further background rejection by means of the topology of the reconstructed tracks, NEXT-White has been exploited beyond its original goals in order to perform a neu-trinoless double beta decay search. The analysis considers the combination of 271.6 days of Xe-136-enriched data and 208.9 days of 136Xe-depleted data. A detailed background mod-eling and measurement has been developed, ensuring the time stability of the radiogenic and cosmogenic contributions across both data samples. Limits to the neutrinoless mode are obtained in two alternative analyses: a background-model-dependent approach and a novel direct background-subtraction technique, offering results with small dependence on the background model assumptions. With a fiducial mass of only 3.50 +/- 0.01 kg of Xe-136-enriched xenon, 90% C.L. lower limits to the neutrinoless double beta decay are found in the T-1/2(0 nu) > 5.5x10(23) -1.3x10(24) yr range, depending on the method. The presented techniques stand as a pro of-of-concept for the searches to be implemented with larger NEXT detectors., The NEXT Collaboration acknowledges support from the following agencies and institutions: the European Research Council (ERC) under Grant Agreement No. 951281-BOLD; the European Union's Framework Programme for Research and Innovation Horizon 2020 (2014-2020) under Grant Agreement No. 957202-HIDDEN; the MCIN/AEI of Spain and ERDF A way of making Europe under grants PID2021-125475NB and the Severo Ochoa Program grant CEX2018-000867-S; the Generalitat Valenciana of Spain under grants PROMETEO/2021/087 and CIDEGENT/2019/049; the Department of Education of the Basque Government of Spain under the predoctoral training program non-doctoral research personnel; the Spanish la Caixa Foundation (ID 100010434) under fellowship code LCF/BQ/PI22/11910019; the Portuguese FCT under project UID/FIS/04559/2020 to fund the activities of LIBPhys-UC; the Israel Science Foundation (ISF) under grant 1223/21; the Pazy Foundation (Israel) under grants 310/22, 315/19 and 465; the US Department of Energy under contracts number DE-AC02-06CH11357 (Argonne National Laboratory), DE-AC02-07CH11359 (Fermi National Accelerator Laboratory), DE-FG02-13ER42020 (Texas A&M), DE-SC0019054 (Texas Arlington) and DE-SC0019223 (Texas Arlington); the US National Science Foundation under award number NSF CHE 2004111; the Robert A Welch Foundation under award number Y-2031-20200401. Finally, we are grateful to the Laboratorio Subterraneo de Canfranc for hosting and supporting the NEXT experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Probabilistic analysis of a cantilever beam with load modelled via Brownian motion

  • Cortés, J.-C.|||0000-0002-6528-2155
  • López-Navarro, Elena|||0000-0003-0164-9007
  • Real Herráiz, Julia Irene
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
This work has been supported by the grant PID2020-115270GB-I00 funded by MCIN/AEI/10.13039/501100011033 and the grant AICO/2021/302 (Generalitat Valenciana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

PHA/PBAT biocomposites reinforced with rice straw lignocellulosic macromolecules: Decoding structure-property relationships through filler size and concentration

  • Cabrera-Villamizar, Laura Andrea
  • Núñez, Eugenia
  • Reyes, Alcira
  • Lizundia, Erlantz
  • López-Rubio, Amparo
  • Fabra Rovira, Maria José
[EN] The environmental crisis caused by the accumulation of conventional plastics requires the development of sustainable alternatives. This study introduced a novel approach to valorize agricultural waste by engineering composite materials based on blends of poly(3-hydroxybutyrate-co-3-valerate) (PHBV) and polybutylene adipate terephthalate (PBAT) reinforced with rice straw (RS) as a possible alternative to conventional plastics. Composites were produced by melt compounding and compression molding, varying PHBV:PBAT mass ratios (80:20, 50:50, 20:80), RS particle sizes (<= 250 mu m and <= 500 mu m), and RS concentration (20, 30 and 40 w/w %). Results showed that the polymer ratio and RS particle size significantly affected filler dispersion and film properties. Smaller RS particles and higher PHBV content (80:20) led to better homogenization, improved interfacial adhesion, and enhanced water vapor barrier properties, while 50:50 blends showed poor dispersion and higher permeability. Colorimetric analysis highlighted the role of RS size in composite coloration. FTIR confirmed that RS interacts physically with the polymers, not chemically. RS addition increased rigidity and water contact angle but reduced ductility, thermal stability, and crystallinity (depending on the concentration and particle size), and increased water vapor permeability. Disintegration tests revealed that only 80:20 blends met ISO 20200:2016 standards, while biodegradation, under industrial composting, was lower for RS-containing blends than controls, highlighting the role of environmental conditions and microbial communities. Life cycle assessment showed the composites had a cradle-to-grave climate change impact of 7.89-8.28 kg CO2-eq & sdot;kg- 1, which is lower than commercial plastics. These findings demonstrate the potential of rice straw as a sustainable filler for biodegradable PHBV/PBAT composites, offering promising alternatives for eco-friendly packaging applications., Grants PID2023-146557OB-C22 funded by MICIU/AEI/10.13039/501100011033 and, by ERDF A way of making Europe. The EVOLVE-PACK project (Innovative Sustainable Packaging to Safeguard Our Food and Our Planet) is a contribution to PRIMA program (Partnership for Research and Innovation in the Mediterranean Area) funded by the European Union Horizon 2020 program and national research funding agency (PCI2024-153409) . Laura Cabrera-Villamizar acknowledges financial support from the Generalitat Valenciana for the award of a Santiago Grisolia grant (GRISOLIA/2021/050) . EL acknowledges financial support from the University of the Basque Country (Convocatoria de ayudas a grupos de investigacion GIU21/010) . The Accreditation as Center of Excellence Severo Ochoa CEX2021-01189-S funded by MCIN/AEI/10.13039/501100011033 is also fully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influencia de la halocromía en las absorbancias de los baños de tintura

  • Martínez-González, Inés|||0000-0002-7681-2879
  • Bou-Belda, Eva|||0000-0003-1461-9296
  • Gisbert Paya, Jaime|||0000-0002-0950-8965
  • Capablanca, L.
[ES] Ante la problemática que genera la determinación pre cisa de cantidad de colorante que es capaz de adherir se a una determinada fibra, en este artículo se realiza un estudio de la influencia de la halocromía en el proto colo de medición de absorbancia de aguas residuales de tintura, concretamente para la investigación se ha analizado Rosa de Bengala. Para ello, se comprueba la coyuntura que se produce al determinar concentracio nes mediante absorbancias de aguas residuales y se definen las longitudes de onda de absorbancia máxima en un rango de pH, todo ello con el fin de definir un protocolo que se ajuste a las propiedades de dicho co lorante y nos permita mitigar los errores que se pueden generar por la halocromía., [EN] In view of the problem generated by the precise determination of the amount of dye that is capable of adhering to a given fiber, this paper studies the influence of halochromism in the absorbance measurement protocol of dye wastewater, specifically Rose Bengal. For this purpose, the juncture that occurs when determining concentrations by means of absorbance of wastewater is tested and the wavelengths of maximum absorbance in a pH range are defined, all with the aim of defining a protocol that adjusts to the properties of this dye., Los autores desean expresar su agradecimiento por el apoyo del patrocinador. La investigación ha sido financiada por Agencia Valenciana de Innovación (AVI), por la financiación aportada en las ayudas del Programa de Proyectos Estratégicos en Cooperación, proyecto que lleva por título TEJIDOS FOTODINÁMICAMENTEACTIVOS PARA PREVENIR LAS INFECCIONES RELACIONADAS CON LA ASISTENCIA SANITARIA con referencia INNEST/2021/28.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An Online Attachment Style Recognition System Based on Voice and Machine Learning

  • Gómez-Zaragozá, Lucía|||0000-0001-9885-2559
  • Marín-Morales, Javier|||0000-0003-1271-2892
  • Parra Vargas, Elena|||0000-0002-0279-9827
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Chicchi Giglioli, Irene Alice
[EN] Attachment styles are known to have significant associations with mental and physical health. Specifically, insecure attachment leads individuals to higher risk of suffering from mental disorders and chronic diseases. The aim of this study is to develop an attachment recognition model that can distinguish between secure and insecure attachment styles from voice recordings, exploring the importance of acoustic features while also evaluating gender differences. A total of 199 participants recorded their responses to four open questions intended to trigger their attachment system using a web-based interrogation system. The recordings were processed to obtain the standard acoustic feature set eGeMAPS, and recursive feature elimination was applied to select the relevant features. Different supervised machine learning models were trained to recognize attachment styles using both gender-dependent and gender-independent approaches. The gender-independent model achieved a test accuracy of 58.88%, whereas the gender-dependent models obtained 63.88% and 83.63% test accuracy for women and men respectively, indicating a strong influence of gender on attachment style recognition and the need to consider them separately in further studies. These results also demonstrate the potential of acoustic properties for remote assessment of attachment style, enabling fast and objective identification of this health risk factor, and thus supporting the implementation of large-scale mobile screening systems., This work was supported in part by the Generalitat Valenciana under Grant ACIF/2021/187, and its funded Project Mixed reality and brain decision -REBRAND under Grant PROMETEO/2019/105, and in part by the Universitat Politecnica de Valencia under Grants PAID-10-20 and PAID-PD-22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Deep Learning-Based Fiber Orientation Analysis for Discontinuous Composites: Application to Material Extrusion Additive Manufacturing

  • García-Gascón, César|||0009-0007-6772-0474
  • Javier Bas-Bolufer
  • Castelló-Pedrero, Pablo|||0000-0002-6927-6430
  • Chinesta, Francisco
[EN] This paper presents a novel deep learning-based (DL) approach to characterize short-fiber orientation in material extrusion large format additive manufacturing (LFAM). The method focuses on Acrylonitrile Butadiene Styrene (ABS) reinforced with short glass fibers 20%, a material widely used due to its enhanced mechanical performance. Traditional fiber orientation analysis, which relies on microscopy and manual image processing, is often costly and time-consuming. To address this, we developed Python algorithms to generate synthetic SEM-like images to train a Convolutional Neural Network (CNN). The proposed CNN accurately predicts the fiber orientation tensors directly from micrographs, with consistent results with conventional methods. The combination of synthetic data generation and deep learning provides a scalable and rapid alternative for fiber orientation analysis. This approach improves the analysis of fiber orientation in discontinuous composite materials and has the potential to be applied to additive manufacturing and other forming processes. This study demonstrates that combining deep learning with synthetic data generation provides an effective, scalable solution for fiber orientation analysis in LFAM, confirming that CNN-based methods can greatly improve material characterization. More accurate performance prediction and quality control could be achieved in fiber-reinforced additive manufacturing., This research received partial funding from the Government of Spain under Project No. PID2023-151110OB-I00 and Generalitat Valenciana under CIPROM/2022/3 and CIACIF/2021/286. This research project is part of the program DesCartes and is supported by the National Research Foundation, Prime Minister's Office, Singapore under its Campus for Research Excellence and Technological Enterprise (CREATE) program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Maximal regularity for time-stepping schemes arising from convolution quadrature of non-local in time equations

  • Lizama, Carlos
  • Murillo Arcila, Marina
[EN] We study discrete time maximal regularity in Lebesgue spaces of sequences for time-stepping schemes arising from Lubich's convolution quadrature method. We show minimal properties on the quadrature weights that determines a wide class of implicit schemes. For an appropriate choice of the weights, we are able to identify the theta-method as well as the backward differentiation formulas and the L1-scheme. Fractional versions of these schemes, some of them completely new, are also shown, as well as their representation by means of the Grunwald-Letnikov fractional order derivative. Our results extend and improve some recent results on the subject and provide new insights on the basic nature of the weights that ensure maximal regularity., C. Lizama is partially supported by ANID Project Fondecyt 1180041. M. Murillo-Arcila is supported by MCIN/AEI/10.13039/501100011033, Project PID2019-105011GB-I00, and by Generalitat Valenciana, Project PROMETEO/2021/070.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing Vocabulary Acquisition with Mnemonics in a Serious Video Game

  • Casañ-Pitarch, Ricardo|||0000-0002-1689-7954
[EN] The manipulation of virtual objects in video games acts as a form of mnemonics, enhancing information retention through visuals, narratives, and actions. This research aims to evaluate the effectiveness of the video game The Engineer in helping students in a foreign language classroom acquire new vocabulary. 64 industrial engineering bachelor¿s degree students participated in this study, with 38 in the experimental group and 26 in the control group. All students were enrolled in the professional English for industrial engineering (B2) subject, a requirement of their bachelor¿s degree program. Both groups received the same content and classroom hours. However, while the control group reinforced learning through paper-based exercises, the experimental group engaged with the video game The Engineer. To assess their performances, students from both groups completed a vocabulary pre-test in the first lesson, followed by two post-tests: one immediately after the lessons and another one two weeks later. The results showed that the experimental group outperformed the control group in both post-tests. Although scores declined in the second post-test, the experimental group exhibited a less significant drop. In conclusion, these findings suggest that the use of mnemonics in a video game could be effective in assisting students to acquire new vocabulary., This work is the result of two finalised projects that we must acknowledge. First, the project funded by the Autonomous Government of the Valencian Community (Spain), Subvencions a grups d investigació emergent, reference GV/2021/035, which supported the initial development of the video game. Subsequently, this study was further developed within the educational innovation and improvement project A+D 2023 PIME C (Ref. 1920), Enseñanza de inglés para el negocio de la ingeniería industrial a través de simulación, juego y gamificación , funded by the Vice-Rector s Office for Studies, Quality and Accreditation of the Universitat Politècnica de València through the 2023 Learning + Teaching Call.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Incorporation of TiO2 and TiO2-Ag Nanoparticles in Recycled High-Density Polyethylene: Effect of the Type of Photocatalyst and Incorporation Method on Photocatalytic Activity for the Decomposition of NO

  • Gavilanes, Dayana
  • Cataño, Francisco A.
  • Saavedra, Marcela
  • Carbonnel, Alexandre
  • Murillo, Herman A.
  • Loyo, Carlos
  • Zapata, Paula A.
  • Quiles-Carrillo, Luis|||0000-0001-8037-2215
  • Balart, Rafael|||0000-0001-5670-7126
[EN] This work reported two types of photocatalysts in polymeric sheets derived from recycled high-density polyethylene (HDPEr): anatase TiO2 and Ag-decorated anatase TiO2 (TiO2-Ag). The Ag nanoparticles were deposited on the TiO2 nanoparticles via chemical reduction using formaldehyde as the reducing agent, although XPS analysis indicated that anatase was also reduced during Ag deposition. The sheets were prepared using two methods: extrusion and a plasma immersion process. In the first one, nanoparticles were introduced during extrusion, resulting in photocatalyst/HDPEr composites. On the other hand, the plasma method involved depositing photocatalyst nanoparticles into the polymer sheet surface through a two-step process of air plasma treatment followed by immersion in an aqueous photocatalyst suspension. The composites obtained through extrusion exhibited a higher Young's modulus compared to neat HDPEr, attributed to the reinforcing effect of the nanoparticles, which was more significant with the incorporation of TiO2 nanoparticles. Photocatalytic activity assessment revealed that sheets obtained by extrusion showed poor performance, whereas photocatalyst deposition on sheets significantly enhanced NOx photodegradation. Notably, TiO2-Ag nanoparticles exhibited superior photocatalytic activity, with the polymeric sheet containing TiO2-Ag nanoparticles on the surface achieving the highest activity (similar to 23.67% NOx photodegradation). The detailed methodology and robust experimental data provided offer valuable insights into optimizing nanoparticle incorporation techniques to enhance the functional properties of recycled polymeric materials for environmental applications. Overall, although the plasma treatment did not affect the mechanical properties of the sheets significantly, it allows an outstanding advance in NOX abatement. Especially for the TiO2-Ag-modified sheets. Based on this background, this research addresses a double environmental approach by developing self-cleaning building panels from HDPEr., F. A. Cataño and P. A. Zapata thank Proyecto "Obtencion de compositos biodegradables utilizando un modelo de economia circular", DICYT codigo 022341ZR_AYUDANTE, Vicerrectoria de Investigacion, Desarrollo e Innovacion de la Universidad de Santiago de Chile. P.A. Zapata acknowledges the financial support under FONDECYT Regular Project 1220093. D. Gavilanes thank ANID BECAS/DOCTORADO NACIONAL 21210580, Agencia Nacional de Investigacion y Desarrollo. Gobierno de Chile. This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU"/PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. L. Quiles-Carrillo wants to thank "Vicerrectorado de Investigacion" at Universitat Politecnica de Valencia (UPV) for partial funding of this research through the program "Funds for First Research Projects" (PAID-06-22). A. Carbonnel thanks ANID-Subdireccion de Investigacion Aplicada. Fondef IDeA I+D. Folio: ID20I10291.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Heterogeneous MMW/VLC Access Networks Based on Convergent Photonic Fronthaul Links

  • Botella-Campos, Marta|||0000-0002-1317-286X
  • Apolo-Gonzaga, Juan Andrés
  • Mora Almerich, José|||0000-0002-2877-4118
  • Romero-Huedo, Jaime
  • Salvador-Llàcer, Pau|||0000-0002-2197-4942
  • Valls Coquillat, Javier|||0000-0002-9390-5022
  • Almenar Terre, Vicenç|||0000-0002-8742-2315
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] This work experimentally demonstrates the convergence of visible light communications (VLC) and millimeter wave (mmW) wireless access technologies by using a unified optical fronthaul link that provides simultaneous signals to be transmitted over light emitting diode (LED) and seamless antennas-based links, respectively. Frequency multiplication is provided in the fiber link by using a carrier suppressed Mach-Zehnder modulator (CS-MZM) that offers a high-quality signal generation at both baseband (BB) and mmW frequencies. Moreover, this flexible and efficient photonic signal generation approach uses a directly modulated laser (DML) to take advantage of the relative gain given by the combination of the DML chirp and the fiber dispersion in the mmW band. Experimental trials of simultaneous VLC and mmW access have been done over distances up to 2.5 and 4 m, respectively; with maximum throughputs of around 70.3 and 393.1 Mbps for signal bandwidths of 30 and 100 MHz, respectively. Moreover, the effective transmission of different M-QAM OFDM modulation formats validates the approach as a promising enabler for future convergent heterogeneous 6G networks., This work was supported in part by OPTIMISE by MCIN/AEI/ 10.13039/501100011033 under Grant PID2021-126514OB-I00, in part by ERDF A way of making Europe , and in part by regional Project PROMETEO 2021/015 Disruptive Photonics Technologies for 2030 funded by (Generalitat Valenciana). (Corresponding author: M. Botella-Campos.)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Combined and Individual Effects of Chlorella sp. and Bacterial Probiotics in Biofloc Systems for White Shrimp (Penaeus vannamei)

  • Cascales-Martos, Tatiana
  • Moyano López, Francisco Javier
  • Brol, Jéssica
  • Martínez-Llorens, Silvia|||0000-0002-9824-3267
  • Tomas-Vidal, A.|||0000-0002-2985-9324
  • Jover Cerda, Miguel|||0000-0001-9049-0573
  • Peñaranda, D.S.|||0000-0002-0861-976X
[EN] This study aimed to evaluate the effects of establishing a population of the green microalgae Chlorella sp. on different key aspects of a biofloc culture of Penaeus vannamei in comparison with those obtained with a commercial probiotic. The aspects evaluated were shrimp zootechnical performance, nutritional composition of biofloc and microbial populations of shrimp intestinal microbiota and biofloc. Four treatments were tested: two of them included Chlorella sp. alone (M) or in combination to a bacterial probiotic (MP), while the other two included only the probiotic (P) or none of them (C). The presence of Chlorella sp. enhanced protein and phosphorus bioavailability in the biofloc and contributed to nutrient bioremediation within the system. However, shrimp growth performance and survival were significantly reduced, likely due to greater and more prolonged nitrate exposure following microalgae inoculation. Although overall nitrate and phosphate concentrations were higher in microalgae treatment, their accumulation over the experimental period was lower in the presence of Chlorella sp. In addition, microalgal supplementation reduced the abundance of bacterial groups associated with oligotrophic lifestyles, complex organic matter degradation, and nitrogen cycling in the intestinal microbiota. In contrast, probiotic supplementation increased protein content in shrimp and phosphorus bioavailability in the biofloc, while zootechnical performance remained comparable to the control and was higher than in microalgae treatments. Furthermore, probiotic addition reduced the abundance of Flavobacteriaceae, a bacterial family proposed as a bioindicator of White Feces Syndrome (WFS) in P. vannamei., This research was funded by the Ministry of Science and Innovation, Spain, the State Research Agency (AEI), and the European Union NextGenerationEU/PRTR, grant TED2021-129272B-C21. T.C-M. was supported by Generalitat Valenciana, through the INVEST Program (grant INVEST/2022/434). J.B. was supported by a predoctoral fellowship from the Generalitat Valenciana under the Santiago Grisolia Program (grant CIGRIS/2021/109).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Identification of atrial fibrillation drivers by means of concentric ring electrodes

  • Prats-Boluda, Gema|||0000-0002-9362-5055
  • Guillem Sánchez, María Salud|||0000-0001-5660-3693
  • Ye Lin, Yiyao|||0000-0003-2929-181X
  • Garcia-Casado, Javier|||0000-0003-1410-2721
  • Rodrigo, Miguel
[EN] Background and objective: The prevalence of atrial fibrillation (AF) has tripled in the last 50 years due to population aging. High-frequency (DFdriver) activated atrial regions lead the activation of the rest of the atria, disrupting the propagation wavefront. Fourier based spectral analysis of body surface potential maps have been proposed for DFdriver identification, although these approaches present serious drawbacks due to their limited spectral resolution for short AF epochs and the blurring effect of the volume conductor. Laplacian signals (BCECG) from bipolar concentric ring electrodes (CRE) have been shown to outperform the spatial resolution achieved with conventional unipolar recordings. Our aimed was to determine the best DFdriver estimator in endocardial electrograms and to assess the BC-ECG capacity of CRE to quantify AF activity non-invasively. Methods: 31 AF episodes were simulated using realistic tridimensional models of the atria electrical activity and torso. Periodogram and autoregressive (AR) spectral estimators were computed and the percentile (P90th, P95th and P98th) to impose on the dominant frequencies (DFs) across whole atria to define the best DFdriver estimator evaluated. The identification of DFdriver on DFs from BC-ECG and unipolar surface signals with conventional disc electrodes was compared. Results: The best DFdriver estimator was P95th and AR order 100. BC-ECG signals allowed better detection of AF activity than unipolar signals, with a significantly greater percentage of electrode locations in which DFdriver was identified (p-value 0.0095). Conclusions: The use of BC-ECG signals for body surface Laplacian potential mapping with CRE could be helpful for better AF diagnosis, prognosis and ablation procedures than those with conventional disk electrodes., This work was supported by the Spanish Ministry of Economy and Competitiveness (PID2020-114291RB-I00) and the Instituto de Salud Carlos III, the European Regional Development Fund (MCIU/AEI/FEDER, UE RTI2018-094449-A-I00-AR, PI17/01106) , EIT Health (Activity code 19600, EIT Health is supported by EIT, a body of the European Union) and the Generalitat Valenciana (AICO/2021/318, AICO/2021/126 and AICO/2019/220) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Enhancing Precision Medicine: An Automatic Pipeline Approach for Exploring Genetic Variant-Disease Literature

  • Contreras-Ochando, Lidia
  • Pla Santamaría, Ferran
  • Segarra Soriano, Encarnación
  • Marco-García, Pere|||0009-0003-7026-3543
  • León-Palacio, Ana|||0000-0003-3516-8893
  • Hurtado Oliver, Lluis Felip|||0000-0002-1877-0455
[EN] Advancements in genomics have generated vast amounts of data, requiring efficient methods for exploring the relationships between genetic variants and diseases. This paper presents a pipeline approach that automatically integrates diverse biomedical databases, including NCBI Gene, MeSH, LitVar2, PubTator, and SynVar, for retrieving comprehensive information about genes, variants, diseases, and associated literature. The pipeline consists of multiple stages: querying and searching across the different databases, extracting relevant data, and applying filters to refine the results. Its goal is to bridge the gap in information retrieval related to genetic variants and diseases by providing a systematic framework for discovering relevant literature. The pipeline uses open-access sources to uncover additional articles not referenced in expert reports that mention the genetic variants of interest. In this paper, we present the methodology of the pipeline, discuss its limitations and highlight its potential for advancing information systems, data management, and interoperability in the domains of genomics and precision medicine., This work is partially supported by MCIN/AEI/10.13039/501100011033, by the 'European Union' and 'NextGenerationEU/MRR', and by 'ERDF A way of making Europe' under grants PDC2021-120846-C44 and PID2021-126061OB-C41. It is also partially supported by the Generalitat Valenciana underproject CIPROM/2021/023. We would like to thank the authors of LitVar2 for their valuable assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiplexable and Biocomputational Virus Detection by CRISPR-Cas9-Mediated Strand Displacement

  • Márquez-Costa, Rosa
  • Montagud-Martínez, Roser
  • Marques, Maria Carmen
  • Albert, Eliseo
  • Navarro, David
  • Ruiz, Raúl
  • Rodrigo Tarrega, Guillermo
  • Daròs, José-Antonio|||0000-0002-6535-2889
[EN] Recurrent disease outbreaks caused by different viruses, including the novel respiratory virus SARS-CoV-2, are challenging our society at a global scale; so versatile virus detection methods would enable a calculated and faster response. Here, we present a novel nucleic acid detection strategy based on CRISPR-Cas9, whose mode of action relies on strand displacement rather than on collateral catalysis, using the Streptococcus pyogenes Cas9 nuclease. Given a pre-amplification process, a suitable molecular beacon interacts with the ternary CRISPR complex upon targeting to produce a fluorescent signal. We show that SARS-CoV-2 DNA amplicons generated from patient samples can be detected with CRISPR-Cas9. We also show that CRISPR-Cas9 allows the simultaneous detection of different DNA amplicons with the same nuclease, either to detect different SARS-CoV-2 regions or different respiratory viruses. Furthermore, we demonstrate that engineered DNA logic circuits can process different SARS-CoV-2 signals detected by the CRISPR complexes. Collectively, this CRISPR-Cas9 R-loop usage for molecular beacon opening (COLUMBO) platform allows a multiplexed detection in a single tube, complements the existing CRISPR-based methods, and displays diagnostic and biocomputing potential., This work was supported by the Fondo Supera Covid-19 from CRUE and Banco Santander (Grant COV-CRISPIS to G.R.), the CSIC PTI Salud Global (Grant SGL2021-03-040 to G.R.) through the NextGenerationEU Fund (regulation 2020/2094), the Spanish Ministry of Science and Innovation (Grants PGC2018-101410-B-I00 to G.R. and PID2020-114691RB-I00 to J.A.D., both cofinanced by the European Regional Development Fund), and the Regional Government of Valencia (Grants SEJI/2020/011 and GVA-COVID19/2021/036 to G.R.). R.M.C. was supported by a predoctoral fellowship from the Spanish Ministry of Science and Innovation (PRE2019-088531). Publication fees covered by the CSIC Open Access Publication Support Program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pterin-Thymidine Adducts: From Their Photochemical Synthesis to Their Photosensitizing Properties

  • Godoy Ortega, Gricelda
  • Lorente, Carolina
  • Thomas, Andrés H.
  • Rodríguez Muñiz, Gemma María|||0000-0001-8989-2401
  • Lhiaubet, Virginie Lyria|||0000-0002-8205-8892
[EN] Pterin (Ptr) is the model compound of aromatic pterins, which are efficient photosensitizers present in human skin and are able to oxidize biomolecules upon UVA irradiation. Photosensitization involves chemical alteration of a biomolecule as a result of the initial absorption of radiation by another chemical species, the photosensitizer. Under anaerobic conditions, Ptr reacts with thymine (T) to form photoadducts (T-Ptr). In this work, we present a method to prepare and purify T-Ptr adducts, using 2 '-deoxythymidine 5 '-monophosphate (dTMP) and single stranded oligonucleotide 5 '-d(TTTTT)-3 ' (dT5), and investigate their photosensitizing properties. Interestingly, the Ptr moiety, when attached to T, retains its photophysical properties. The adduct dTMP-Ptr, upon excitation, forms singlet and triplet excited states, the latter being capable of transferring energy to dissolved O2 and generating singlet oxygen, with an efficiency similar to Ptr. In air-equilibrated solutions, both dTMP-Ptr and dT5-Ptr adducts can photosensitize the oxidation of tryptophan and 2 '-deoxyguanosine 5 '-monophosphate, two of the main targets of photosensitization in biological systems, with efficiencies close to that of free Ptr. The mechanisms involved in the oxidation of biomolecules can be either type I (electron transfer) or type II (singlet oxygen)., The present work was partially supported by Consejo Nacional de Investigaciones Cientificas y Tecnicas (CONICET, Grants P-UE 2017 22920170100100CO, Grant PIP 2021-2023 GI 11220200100877CO), Agencia de Promocion de la Investigacion, el Desarrollo Tecnologico y la Innovacion (Agencia I+D+i, Grants PICT 2019-3416), Universidad Nacional de La Plata (UNLP, Grant 11/X840). The authors thank CONICET and CSIC for supporting their collaboration through a Project of International Cooperation (Programme 2023). Also, financial support from CSIC (i-COOP, ref COOPB22038) and the Spanish (project PID2021-128348NB-I00) funded by MCIN/AEI/10.13039/501100011033/and "FEDER a way of making Europe" and regional (CIAICO/2021/061) governments is acknowledged. G.G.-O. thanks CONICET for doctoral research fellowship. Authors thank Jesuan J. Farias for the preparation of the standard of NFKyn. C.L. and A.H.T. are research members of CONICET. V.L.-V. and G.M.R.-M. are research members of CSIC.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A generalized sequential subpredictor for input delayed systems under time-varying delay mismatches

  • González Sorribes, Antonio|||0000-0003-2690-0472
[EN] For input delayed systems, the sequential subpredictor (SSP) control scheme has the advantage that arbitrarily large delays can be tolerated in the control loop by introducing more and more subpredictors. However, an exact delay compensation is not possible in the presence of time-varying delay mismatches, and larger delays cannot therefore be obtained by increasing the number of subpredictors. To alleviate this limitation and enhance robustness against time-varying delay uncertainties, a generalized sequential subpredictor (SSP) control scheme is proposed by introducing new observer parameters that can be designed via Linear Matrix Inequalities (LMI) and Cone-Complementarity Linearization (CCL) algorithm. Finally, the effectiveness of the proposed method is illustrated by a simulation example.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On a connection between the N-dimensional fractional Laplacian and 1-D fractional operators on lattices

  • Lizama, Carlos
  • Murillo Arcila, Marina
[EN] We show the remarkable fact that the nonlocal property of the discrete N dimensional fractional Laplacian acting in the second variable of the lattice N x Z(N) can be exchanged with an equivalent memory corresponding to a power of a onedimensional operator that acts only on the first variable of the complete lattice Z x Z(N). This property allows to reduce the number of calculations and leads to more complete analytical solutions of mathematical models on lattices. The connection is established by showing that a first order equation in the first variable, and of fractional order alpha > 0 in the second, has the same solution as another of order 1/alpha in the first variable and integer order in the second. As a result, we provide for the first time the fundamental solution for the N-dimensional heat equation discrete in time and space., C. Lizama is partially supported by ANID Project Fondecyt 1180041 and Generalitat Valenciana, Project PROMETEU/2021/070. M. Murillo-Arcila is supported by MCIN/AEI/10.13039/501100011033, Project PID2019-105011GB-I00, and by Generalitat Valenciana, Project PROMETEU/2021/070.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fiber Enrichment of 3D Printed Apricot Gel Snacks with Orange By-Products

  • Molina-Montero, María del Carmen|||0000-0002-0797-8111
  • Vicente-Jurado, Diana|||0009-0005-2326-5807
  • Igual Ramo, Marta|||0000-0001-5128-5489
  • Martínez-Monzó, Javier|||0000-0002-1123-2304
  • García-Segovia, Purificación|||0000-0002-4968-5050
[EN] Concern about food waste has become a major global concern. The waste generated by the agri-food industry poses an environmental challenge. However, the development of 3D printing technology offers an opportunity to address this problem. By incorporating food waste into inks, it can create personalized food tailored to individual needs. The aim of this study is the valorization of orange by-products (OBP) in 3D printed gels to obtain a final product in the form of a fiber-enriched snack. Gelatin gels were printed with different concentrations of apricot pulp (30, 50, and 70%) and OBP was added. These gels were subjected to a freeze-drying process. The rheology of the gels before and after printing, the printing precision, and the post-treatment of the freeze-dried product, including color, shear force, and the presence of bioactive compounds, were evaluated. The addition of OBP resulted in an increase in the elasticity (997¿1242u) of the samples and improved the printability of them. However, an increase in the hardness (173¿184u) was observed in the freeze-dried samples. The use of OBP not only improves the printability of the gels but also enables obtaining fiber-enriched snacks, which could contribute to the reduction in food waste and the promotion of healthy and sustainable food., This research was funded by Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital, Generalitat Valenciana, grant number AICO/2021/137, project AGROALNEXT/2022/001, and from MCIN/AEI/10.13039/501100011033/ through project PID2020-115973RB-C22 and the FPI PhD contract granted by the Universitat Politècnica de Valencia subprograma 1 (PAID 01 21).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Self-propelled enzyme-controlled IR-mesoporous silica Janus nanomotor for smart delivery

  • Mayol, Beatriz
  • Pradana-López, Sandra
  • Villalonga, Anabel
  • Anillo, Carlos
  • Vilela, Diana
  • Sánchez, Alfredo
  • Martínez-Ruiz, Paloma
  • Villalonga, Reynaldo
  • García-Fernández, Alba|||0000-0002-8416-1674
  • De La Torre-Paredes, Cristina
  • Diez-Sánchez, Paula
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
[EN] Here, we report the preparation of a novel Janus nanoparticle with opposite Ir and mesoporous silica nanoparticles through a partial surface masking with toposelective modification method. This nanomaterial was employed to construct an enzyme -powered nanomachine with self -propulsion properties for on -command delivery. The cargo -loaded nanoparticle was provided with a pH -sensitive gate and unit control at the mesoporous face by first attaching boronic acid residues and further immobilization of glucose oxidase through reversible boronic acid esters with the carbohydrate residues of the glycoenzyme. Addition of glucose leads to the enzymatic production of H 2 O 2 and gluconic acid, being the first compound catalytically decomposed at the Ir nanoparticle face producing O 2 and causing the nanomachine propulsion. Gluconic acid leads to a pH reduction at the nanomachine microenvironment causing the disruption of the gating mechanism with the subsequent cargo release. This work demonstrates that enzyme -mediated self -propulsion improved release efficiency being this nanomotor successfully employed for the smart release of Doxorubicin in HeLa cancer cells., Financial support from the Spanish Ministry of Economy and Competitiveness (projects CTQ2017-87954-P and PID2021-125723NB- I00) and the Spanish Ministry for Science and Innovation (project CNS2022-135255) is gratefully acknowledged. This work was also supported by PID2021-126304OB-C41 project via MCIN/AEI/10.13039/501100011033/and by the Generalitat Valenciana (CIPROM/2021/007) . Thanks to the Instituto de Salud Carlos III and the European Social Fund for financial support "Sara Borrell" (CD20/00120) . The Complutense University of Madrid and the Autonomous Community of Madrid also supported this work through the PR27/21- 015 Grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Manifold learning for coherent design interpolation based on geometrical and topological descriptors

  • Muñoz-Pellicer, David
  • Allix, O.
  • CHINESTA SORIA, FRANCISCO JOSE
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Nadal, Enrique|||0000-0002-2808-298X
[EN] In the context of intellectual property in the manufacturing industry, know-how is referred to practical knowledge on how to accomplish a specific task. This know-how is often difficult to be synthesised in a set of rules or steps as it remains in the intuition and expertise of engineers, designers, and other professionals. Today, a new research line in this concern spot-up thanks to the explosion of Artificial Intelligence and Machine Learning algorithms and its alliance with Computational Mechanics and Optimisation tools. However, a key aspect with industrial design is the scarcity of available data, making it problematic to rely on deep-learning approaches. Assuming that the existing designs live in a manifold, in this paper, we propose a synergistic use of existing Machine Learning tools to infer a reduced manifold from the existing limited set of designs and, then, to use it to interpolate between the individuals, working as a generator basis, to create new and coherent designs. For this, a key aspect is to be able to properly interpolate in the reduced manifold, which requires a proper clustering of the individuals. From our experience, due to the scarcity of data, adding topological descriptors to geometrical ones considerably improves the quality of the clustering. Thus, a distance, mixing topology and geometry is proposed. This distance is used both, for the clustering and for the interpolation. For the interpolation, relying on optimal transport appear to be mandatory. Examples of growing complexity are proposed to illustrate the goodness of the method.(c) 2022 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)., The authors gratefully acknowledge the financial support of Ministerio de Educacion, Spain (FPU16/07121),Generalitat Valenciana, Spain (Prometeo/2021/046 and CIAICO/2021/226), Ministerio de Economia, Industriay Competitividad, Spain (DPI2017-89816-R) and FEDER. O. Allix would like to thank the French National University Council and ENS Paris-Saclay for supporting his sabbatical at UPV, which made it possible to closely interact with the colleagues from I2MB-UPV. Funding for open access charge: CRUE-Universitat Politecnica de Valencia
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Models and algorithms for a yard crane scheduling problem in container ports

  • Vallada Regalado, Eva|||0000-0003-3918-1788
  • Villa Juliá, Mª Fulgencia|||0000-0003-0019-8777
  • Belenguer, Jose Manuel
  • Alvarez-Valdes, Ramon
[EN] This paper addresses the scheduling of a yard crane in an automated container block, considering its rela-tionships with the other terminal subsystems. Containers coming into the block to be stored have release times, indicating the moment at which they arrive from ships or trucks. Containers being retrieved have due times, indicating when they will be required by other subsystems. The problem can be seen as a pickup routing problem and also as a one-machine scheduling problem. As a starting point, integer linear models were developed for both approaches. Then, to obtain good solutions for large instances, several heuristic algorithms, coupled with a local search, were proposed. An extensive computational study, based on a newly generated benchmark, shows the limits of the exact methods and the quality of the solutions obtained by the heuristics., The authors are partially supported by the Spanish Ministry of Science and Innovation under the project "OPTEP-Port Terminal Operations Optimization" (No. RTI2018-094940-B-I00), partially financed with FEDER funds, by the Spanish Ministry of Science and Innovation under the project "OPRES-Realistic Optimization in Problems in Public Healt"(No. PID2021-124975OB-I00), partially financed with FEDER funds and by the Agencia Valenciana de la Innovacio (AVI) under the project "ireves (innovacion en vehiculos de emergencia sanitaria): una herramienta inteligente de decision" (No. INNACC/2021/26) partially financed with FEDER funds (interested readers can visit http://ireves.upv.es). Some of the authors are supported by the Faculty of Business Administration and Man-agement at the Universitat Politecnica de Valencia. Special thanks are due to Gerardo Gabriel Minella from Instituto Tecnologico de Informatica.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of Viscoelastic Media Combining Ultrasound and Magnetic-Force Induced Vibrations on an Embedded Soft Magnetic Sphere

  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • Jimenez, Noe|||0000-0002-6539-670X
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Tarazona Tárrega, Rafael
  • Company, Miguel
[EN] We report a method to locally assess the complex shear modulus of a viscoelastic medium. The proposed approach is based on the application of a magnetic force to a millimeter-sized steel sphere embedded in the medium and the subsequent monitoring of its dynamical response. A coil is used to create a magnetic field inducing the displacement of the sphere located inside a gelatin phantom. Then, a phased-array system using 3 MHz ultrasound probe operating in pulse-echo mode is used to track the displacement of the sphere. Experiments were conducted on several samples and repeated as a function of phantom temperature. The dynamic response of the sphere measured experimentally is in good agreement with Kelvin¿Voigt theory. Since the magnetic force is not affected by weak diamagnetic media, our proposal results in an accurate estimation of the force acting on the inclusion. Consequently, the estimated viscoelastic parameters show excellent robustness and the elastic modulus agrees with the measurements using a quasi-static indentation method, obtaining errors below 10% in the whole temperature range. The use of the macroscopic inclusion limits the direct application of this method in a biomedical context, but it provides a robust estimation of the elastic modulus that can be used for material characterization in industrial applications., This work was supported in part by the Spanish Ministry of Science, Innovation and Universities through the "Juan de la Cierva - Incorporacion" under Grant IJC2018-037897-I, in part by the Program "Proyectos I+D+i 2019" under Grant PID2019-111436RB-C22, in part by the Agencia Valenciana de la Innovacio under Grant INNCON/2021/8, in part by Generalitat Valenciana under Grant AICO/2020/268, and in part by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana 20142020 under Grant IDIFEDER/2018/022. The work of Alejandro Cebrecos was supported by the Universitat Politecnica de Valencia under Program PAID-10-19.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of Li1.3Al0.3Ti1.7(PO4)3 content and particle size on the electrochemical properties and stability of polymer-based solid electrolytes for lithium batteries

  • Simon, Sonia
  • Ferrer-Nicomedes, Sergio
  • Garcia-Belmonte, Germa
  • Barba-Juan, Antonio
  • Vicente-Agut, Nuria
  • Mormeneo-Segarra, Andrés|||0000-0002-8827-3649
[EN] This work addresses the current limitations of standard composite solid electrolyte membranes through a systematic optimization of the LATP Li1.3Al0.3Ti1.7(PO4)3 wt fraction and rigorous particle size control via selective milling. By precisely integrating these calibrated ceramic particles within a ternary PVDF-HFP/PEO matrix, the resulting configuration establishes a highly balanced framework for advanced lithium-ion battery applications. The optimal composition, designated CSE2H (26 wt% LATP with particle size d50 approximate to 0.875 mu m), exhibits exceptional electrical properties: minimum activation energy (0.138 eV), maximum ionic conductivity (1.12 & sdot;10- 4 S cm- 1 at 30 degrees C and 6.33 & sdot;10- 4 S cm- 1 at 70 degrees C), and stable electrochemical operation within the voltage range 2.5-4.2 V vs. Li+/Li, LFP-cell operating conditions. Electrochemical impedance spectroscopy reveals low interfacial resistance, while chronoamperometry measurements yield a lithium-ion transference number of 0.48, indicating efficient ion transport. Galvanostatic cycling experiments confirm high coulombic efficiency (98%) and good capacity retention: initial capacity of 147 mAh g- 1 LFP at 0.5C stabilizing at 77.58 mAh g- 1 LFP after 200 cycles, with specific discharge capacity of 127.2 mAh g- 1 LFP at 2C. Concurrently, these integrated results establish that this 26 wt% LATP baseline configuration successfully balances interfacial compatibility with competitive electrochemical properties, presenting a highly viable pathway for targeted solidstate battery development., A. B.-J. and G. G.-B. have received funding from Generalitat Valenciana under the Pla Complementari "Programa de Materials Avancats", 2022 (grant number MFA/2022/030) and CIPROM/2024/91. A. B.-J. and N. V.-A. acknowledge the financial support received from projects PID2020-112659RB-I00 and PID2024-158590OB-I00, funded by MICIU/AEI/10.13039/501100011033. N. V.-A. acknowledges support from Universitat Jaume I under project UJI/2023/016. S. F.-N. thank Generalitat Valenciana for the FPI Fellowship Program (grant numbers CIACIF/2021/050). A. M.-S. acknowledge the financial support received from projects PAID-06-25 and PAID-10-24, funded by Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient Scaling and Squaring Method for the Matrix Exponential

  • Blanes Zamora, Sergio|||0000-0001-5819-8898
  • Kopylov, Nikita|||0000-0002-5557-0858
  • Seydaoglu, Muaz
[EN] This work presents a new algorithm to compute the matrix exponential within a given tolerance. Combined with the scaling and squaring procedure, the algorithm incorporates Taylor, partitioned, and classical Pade'\ methods shown to be superior in performance to the approximants used in state-of-the-art software. The algorithm computes matrix--matrix products and also matrix inverses, but it can be implemented to avoid the computation of inverses, making it convenient for some problems. If the matrix A belongs to a Lie algebra, then eA belongs to its associated Lie group, being a property which is preserved by diagonal Pade'\ approximants, and the algorithm has another option to use only these. Numerical experiments show the superior performance with respect to state-of-the-art implementations., This work has been funded by Ministerio de Ciencia e Innovacion (Spain) through project PID2022-136585NB-C21, MCIN/AEI/10.13039/501100011033/FEDER, UE, and also by Generalitat Valenciana (Spain) through project CIAICO/2021/180.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dissolved Organic Matter Behaviour by Conventional Treatments of a Drinking Water Plant: Controlling Its Changes with EEM-PARAFAC

  • Sciscenko, Iván
  • Binetti, Rita
  • Escudero-Oñate, Carlos
  • Oller, Isabel
  • Arqués Sanz, Antonio|||0000-0001-8692-6979
[EN] In the last 20 years, several articles related to the use of fluorescence excitation-emission matrices-parallel factor analysis (EEM-PARAFAC) to monitor dissolved organic matter (DOM) in drinking- and wastewater treatment plants were published. Noteworthy, its use in respective quality control laboratories remains scarce. To extend its popularisation, in this work, EEM-PARAFAC was employed to analyse the DOM composition changes along the different stages of the drinking water treatment plant administrated by Societa Metropolitana Acque Torino. The best PARAFAC model was the one of three components, indicating that the Po River is constituted, mainly, by humic acid-like (HA-L) and tryptophan-like (Try-L) substances, the tyrosine-like ones being negligible (Tyr-L). Results indicated that physical treatments (sedimentation) did not produce a reduction in the PARAFAC scores; however, a 50% decay in 254 nm absorbance was observed. Fluorescent DOM was only removed with chemical treatments, obtaining ca. 70% HA-L scores decay with ozonation and 40% with chlorination. Furthermore, although ozonation degraded HA-L substances, the Try-L scores increased by 25%, indicating the transformation of HA-L into smaller molecules. On the contrary, total organic carbon measurements only exhibited a significant change when comparing the treatment plant's inlet and outlet (approximately a 45% decrease), but not within intermediate processes., The authors want to acknowledge the financial support of Spanish Ministry of Science and Innovation (MCI) for funding under the AquaEnAgri Project (Reference: PID2021-126400OB-C31). I. Sciscenko also acknowledges the financial support of Generalitat Valenciana (CIAPOS/2021/311, project SANITISE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Constraints on the energy spectrum of the diffuse cosmic neutrino flux from the ANTARES neutrino telescope

  • Albert, A.
  • Alves, S.
  • Andre, M.
  • Aubert, J.J.
  • Aublin, J.
  • Baret, B.
  • Basa, S.
  • Becherini, Y.
  • Belhorma, B.
  • Bendahman, M.
  • Benfenati, F.
  • Bertin, V.
  • Biagi, S.
  • Ardid, Miguel|||0000-0002-3199-594X
  • Ardid, S.|||0000-0003-4821-6655
  • García-Méndez, Juan|||0000-0002-1580-0647
[EN] High-significance evidences of the existence of a high-energy diffuse flux of cosmic neutrinos have emerged in the last decade from several observations by the IceCube Collaboration. The ANTARES neutrino telescope took data for 15 years in the Mediterranean Sea, from 2007 to 2022, and collected a high-purity all-flavour neutrino sample. The search for a diffuse cosmic neutrino signal using this dataset is presented in this article. This final analysis did not provide a statistically significant observation of the cosmic diffuse flux. However, this is converted into limits on the properties of the cosmic neutrino spectrum. In particular, given the sensitivity of the ANTARES neutrino telescope between 1 and 50 TeV, constraints on single-power-law hypotheses are derived for the cosmic diffuse flux below 20 TeV, especially for power-law fits of the IceCube data with spectral index softer than 2.8., The authors acknowledge the financial support of the funding agencies: Centre National de la Recherche Scientifique (CNRS), Commissariat à l énergie atomique et aux énergies alternatives (CEA), Commission Européenne (FEDER fund and Marie Curie Program), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Région Alsace (contrat CPER), Région Provence-Alpes-Côte d Azur, Département du Var and Ville de La Seyne-sur-Mer, France; Bundesministerium für Bildung und Forschung (BMBF), Germany; Istituto Nazionale di Fisica Nucleare (INFN), Italy; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; Romanian Ministry of Research, Innovation and Digitalisation (MCID), Romania; MCIN for PID2021-124591NB-C41, -C42, -C43 and PDC2023-145913-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe , for ASFAE/2022/014 and ASFAE/2022 /023 with funding from the EU NextGenerationEU (PRTR-C17.I01) and Generalitat Valenciana, for Grant AST22_6.2 with funding from Consejería de Universidad, Investigación e Innovación and Gobierno de España and European Union NextGenerationEU, for CSIC-INFRA23013 and for CNS2023-144099, Generalitat Valenciana for CIDEGENT/2018/034, /2019/043, /2020/049, /2021/23, for CIDEIG/2023/20 and for GRISOLIAP/2021/192 and EU for MSC/101025085, Spain; Ministry of Higher Education, Scientific Research and Innovation, Morocco, and the Arab Fund for Economic and Social Development, Kuwait. We also acknowledge the technical support of Ifremer, AIM and Foselev Marine for the sea operation and the CC-IN2P3 for the computing facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transcription factors HB21/40/53 trigger inflorescence arrest through abscisic acid accumulation at the end of flowering

  • Sánchez-Gerschon, Verónica
  • de la Hoz-Rodríguez, Sergio
  • González, Florenci V.
  • Martinez-Fernandez, Irene|||0000-0002-3386-779X
  • González-Bermúdez, María R.|||0000-0002-1853-6781
  • Lozano-Juste, Jorge|||0000-0001-7034-566X
  • FERRANDIZ MAESTRE, CRISTINA|||0000-0002-2460-1068
  • Balanzà, Vicente|||0000-0002-1761-1524
[EN] Flowers, and hence, fruits and seeds, are produced by the activity of the inflorescence meristem after the floral transition. In plants with indeterminate inflorescences, the final number of flowers produced by the inflorescence meristem is determined by the length of the flowering period, which ends with inflorescence arrest. Inflorescence arrest depends on many different factors, such as the presence of seeds, the influence of the environment, or endogenous factors such as phytohormone levels and age, which modulate inflorescence meristem activity. The FRUITFULL-APETALA2 (FUL-AP2) pathway plays a major role in regulating the end of flowering, likely integrating both endogenous cues and those related to seed formation. Among AP2 targets, HOMEOBOX PROTEIN21 (HB21) has been identified as a putative mediator of AP2 function in the control of inflorescence arrest. HB21 is a homeodomain leucine zipper transcription factor involved in establishing axillary bud dormancy. Here, we characterized the role of HB21 in the control of the inflorescence arrest at the end of flowering in Arabidopsis (Arabidopsis thaliana). HB21, together with HB40 and HB53, are upregulated in the inflorescence apex at the end of flowering, promoting floral bud arrest. We also show that abscisic acid (ABA) accumulation occurs in the inflorescence apex in an HB-dependent manner. Our work suggests a physiological role of ABA in floral bud arrest at the end of flowering, pointing to ABA as a regulator of inflorescence arrest downstream of the HB21/40/53 genes.; Three homeodomain leucine zipper transcription factors trigger abscisic acid accumulation in the inflorescence apex at the end of the reproductive phase, arresting unpollinated floral bud development., This work was supported by the Ministerio de Ciencia e Innovacion (grant no. RTI2018-099239-B-I00) and Generalitat Valenciana (grant no. PROMETEU/2019/004 and CIPROM/2022/1) to C.F. and by the Ministerio de Economia, Industria y Competitividad (BES 2016078834) to V.S.-G. Generalitat Valenciana (grant no. PROMETEO CIPROM/2021/079) and Universitat Jaume I (UJI-B2020-03, UJI-B2021- 71) to F.V.G. also supported this work. J.L.-J. group is funded by grants RYC2020-029097-I and PID2021-128826OA-I00 from the Ministerio de Ciencia e Innovacion, AEI, ERDF, and grants CISEJI/2022/26 and AGROALNEXT/2022/067 from Generalitat Valenciana. It forms part of the AGROALNEXT program and was supported by MCIN with funding from the European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. M.R.G.-B. holds a PhD contract funded by the Universitat Politecnica de Valencia (SP20220500).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

2D/2D MOF/MXene Schottky Junction: Prolonged Carrier Lifetime and Enhanced Hydrogen Evolution Efficiency

  • Cabrero-Antonino, Maria
  • Uscategui-Linares, Andrés Felipe|||0000-0003-2448-9966
  • Ramírez-Grau, Rubén
  • García-Aznar, Pablo|||0000-0003-0586-0037
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • Zhang, Jianjun
  • Yu, Jiaguo
  • Xu, Feiyan
[EN] Harnessing sunlight for photocatalytic overall water splitting offers a sustainable approach to renewable hydrogen (H2) production, addressing global energy and environmental challenges. However, the development of efficient and durable photocatalysts remains a significant obstacle. This study introduces the design and performance of a 2D/2D Schottky heterojunction composed of Cu2[CuTCPP] MOF of nanometric size and exfoliated Ti3C2 MXene for visible-light-driven overall water splitting. By leveraging the extensive interfacial contact between the two components, an interfacial electric field is generated, promoting efficient charge migration and prolonging carrier lifetimes, as confirmed through systematic density functional theory simulations, in situ irradiation X-ray photoelectron spectroscopy, femtosecond transient absorption spectroscopy, and X-ray absorption spectroscopy. Ti3C2 MXene, acting as a cocatalyst for photohole transport and accumulation, reduces oxidative degradation and slows catalyst deactivation. The synergistically enhanced light absorption properties of the Cu2[CuTCPP]/Ti3C2 heterojunction result in an impressive H2 evolution rate exceeding 5000 mu mol gcat(-)1, underscoring its potential for next-generation photocatalytic systems in renewable energy applications., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/ 10.13039/501100011033), Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1) and European Commission (ERC Adv. Grant 101141466 DISCOVERY) is gratefully acknowledged. R. R.-G. and J. A. thank the Spanish Ministry of Science and Innovation for a postgraduate scholarship and a Ramon y Cajal research associate contract, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Search for non-standard neutrino interactions with 10 years of ANTARES data

  • Albert, A.
  • Alves, S.
  • Andre, M.
  • Anghinolfi, M.
  • Anton, G.
  • Aubert, J. J.
  • Aublin, J.
  • Baret, B.
  • Basa, S.
  • Belhorma, B.
  • Bendahman, M.
  • Benfenati, F.
  • Bertin, V.
  • Martínez Mora, Juan Antonio
  • Poirè, Chiara
  • Ardid, Miguel|||0000-0002-3199-594X
  • Ardid, S.|||0000-0003-4821-6655
[EN] Non-standard interactions of neutrinos arising in many theories beyond the Standard Model can significantly alter matter effects in atmospheric neutrino propagation through the Earth. In this paper, a search for deviations from the prediction of the standard 3-flavour atmospheric neutrino oscillations using the data taken by the ANTARES neutrino telescope is presented. Ten years of atmospheric neutrino data collected from 2007 to 2016, with reconstructed energies in the range from ~16 GeV to 100 GeV, have been analysed. A log-likelihood ratio test of the dimensionless coefficients ¿µ¿ and ¿¿¿ - ¿µµ does not provide clear evidence of deviations from standard interactions. For normal neutrino mass ordering, the combined fit of both coefficients yields a value 1.7¿ away from the null result. However, the 68% and 95% confidence level intervals for ¿µ¿ and ¿¿¿ - ¿µµ, respectively, contain the null value. Best fit values, one standard deviation errors and bounds at the 90% confidence level for these coefficients are given for both normal and inverted mass orderings. The constraint on ¿µ¿ is among the most stringent to date and it further restrains the strength of possible non-standard interactions in the µ ¿ ¿ sector., The authors acknowledge the financial support of the funding agencies: Centre National de la Recherche Scientifique (CNRS), Commissariat a l'energie atomique et aux energies alternatives (CEA), Commission Europeenne (FEDER fund and Marie Curie Program), Institut Universitaire de France (IUF), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Region Ile-de-France (DIM-ACAV), Region Alsace (contrat CPER), Region Provence-Alpes-Cote d'Azur, Departement du Var and Ville de La Seyne-surMer, France; Bundesministerium fur Bildung und Forschung (BMBF), Germany; Istituto Nazionale di Fisica Nucleare (INFN), Italy; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; Council of the President of the Russian Federation for young scientists and leading scientific schools supporting grants, Russia; Executive Unit for Financing Higher Education, Research, Development and Innovation (UEFISCDI), Romania; Ministerio de Ciencia, Innovacion, Investigacion y Universidades (MCIU): Programa Estatal de Generacion de Conocimiento (refs. PGC2018-096663-B-C41, -A-C42, -B-C43, -B-C44) (MCIU/FEDER), Generalitat Valenciana: Prometeo (PROMETEO/2020/019), Grisolia (refs. GRISOLIA/2018/119,/2021/192) and GenT (refs. CIDEGENT/2018/034,/2019/043,/2020/049,/2021/023) programs, Junta de Andalucia (ref. A-FQM-053-UGR18), La Caixa Foundation (ref. LCF/BQ/IN17/11620019), EU: MSC program (ref. 101025085), Spain; Ministry of Higher Education, Scientific Research and Innovation, Morocco, and the Arab Fund for Economic and Social Development, Kuwait. We also acknowledge the technical support of Ifremer, AIM and Foselev Marine for the sea operation and the CC-IN2P3 for the computing facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A conceptual framework for sustainable location, inventory and transportation problems in a supply chain context

  • Becerra-Muñoz, Pablo
  • Mula, Josefa|||0000-0002-8447-3387
  • Sanchis, R.|||0000-0002-5495-3339
[EN] Sustainability in supply chains (SC) is a topic that has been widely discussed recently and, similarly to the quest to develop green SCs, it does not contemplate the integration of economic and social dimensions of sustainable SC management (SSCM). This article proposes a conceptual framework to provide key factors that act as a valuable tool to further develop quantitative models of location, inventory and transportation (LIT) problems in SSCs. The objectives of this paper are to: (i) review the literature by focusing on conceptual frameworks for sustainable SC; (ii) map and construct the conceptual framework blocks by describing each element and dimension; and (iii) validate the conceptual framework. The conceptual framework comprises five main blocks: SC structures, sustainable inputs, quantitative models, inventory policies and sustainability objectives. These five blocks are then formed by different dimensions and elements, which are described in this paper and validated in a mining case study. The results show that no previous studies propose a reference conceptual framework to model a sustainable LIT problem in a CLSC context, which is the main novelty of this paper. Finally, the conceptual framework is validated and applied as a diagnostic tool in two copper mining companies., The research leading to these results received funding from the project "Industrial Production and Logistics Optimization in Industry 4.0" (i4OPT) (Ref. PROMETEO/2021/065) granted by the Valencian Regional Government; and grant PDC2022-133957-I00 (CADS4.0-II) funded by MCIN/AEI/https:// doi.org/10.13039/501100011033 and by European Union Next Generation EU/PRTR. It was also funded by the National Agency for Research and Development (ANID)/Scholarship Program/Doctorado Becas en el Extranjero/2020-72210174. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improved Hypertension Risk Assessment with Photoplethysmographic Recordings Combining Deep Learning and Calibration

  • Cano-Serrano, Jesús
  • Bertomeu-González, Vicente
  • Fácila, Lorenzo
  • Hornenro, Fernando
  • Alcaraz, Raúl
  • Rieta, J J|||0000-0002-3364-6380
[EN] Hypertension, a primary risk factor for various cardiovascular diseases, is a global health concern. Early identification and effective management of hypertensive individuals are vital for reducing associated health risks. This study explores the potential of deep learning (DL) techniques, specifically GoogLeNet, ResNet-18, and ResNet-50, for discriminating between normotensive (NTS) and hypertensive (HTS) individuals using photoplethysmographic (PPG) recordings. The research assesses the impact of calibration at different time intervals between measurements, considering intervals less than 1 h, 1-6 h, 6-24 h, and over 24 h. Results indicate that calibration is most effective when measurements are closely spaced, with an accuracy exceeding 90% in all the DL strategies tested. For calibration intervals below 1 h, ResNet-18 achieved the highest accuracy (93.32%), sensitivity (84.09%), specificity (97.30%), and F1-score (88.36%). As the time interval between calibration and test measurements increased, classification performance gradually declined. For intervals exceeding 6 h, accuracy dropped below 81% but with all models maintaining accuracy above 71% even for intervals above 24 h. This study provides valuable insights into the feasibility of using DL for hypertension risk assessment, particularly through PPG recordings. It demonstrates that closely spaced calibration measurements can lead to highly accurate classification, emphasizing the potential for real-time applications. These findings may pave the way for advanced, non-invasive, and continuous blood pressure monitoring methods that are both efficient and reliable., This research has received financial support from public grants PID2021-123804OB-I00, PID2021-00X128525-IV0 and TED2021-130935B-I00 of the Spanish Government, jointly with the European Regional Development Fund (EU), SBPLY/17/180501/000411 and SBPLY/21/180501/000186 from Junta de Comunidades de Castilla-La Mancha, and AICO/2021/286 from Generalitat Valenciana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessing the Impact of Climate Change on Muscat of Alexandria Grapevines under Rain-Fed Conditions

  • Gisbert, Carmina|||0000-0002-4620-1065
  • Peiró Barber, Rosa Mª|||0000-0002-3009-2343
  • Fos Causera, Mariano|||0000-0002-1355-0349
  • Raigón Jiménez, Mª Dolores|||0000-0001-8055-2259
  • Jaume-Beltran, Mireia
  • Soler, Jaume X.
[EN] Vine growth and reproductive performance are shaped by rootstock–scion interactions, training system, site, and management, making locally tailored combinations essential. We evaluated two clones of Muscat of Alexandria grafted onto rootstocks 41B and 140Ru under rainfed conditions in La Marina Alta (Alicante, Spain), a representative area for this cultivar, during a dry year with anomalously high temperatures. Measurements included fertility, timing of budburst and flowering, phenological development, vigor, fruit set, and berry quality. Drought and heat significantly reduced fruit set and impaired fruit development across all rootstock–scion combinations, with the magnitude of effects differing by pairing. Berry analyses confirmed clone-dependent differences in ripening timing, consistent with previous observations. These findings underscore the importance of careful rootstock–scion selection to enhance acclimation under increasingly hot and dry conditions., [ES] El crecimiento y el rendimiento reproductivo de la vid dependen de la interacción patrón–injerto, el sistema de conducción, el sitio y el manejo, por lo que es esencial ajustar las combinaciones al contexto local. Evaluamos dos clones de Moscatel de Alejandría injertados sobre 41B y 140Ru en régimen de secano en la Marina Alta (Alicante, España), una zona representativa para este cultivar, durante un año seco con temperaturas anómalamente altas. Se midieron fertilidad, fechas de desborre y floración, desarrollo fenológico, vigor, cuajado y calidad de la baya. La sequía y el calor redujeron significativamente el cuajado y afectaron el desarrollo del fruto en todas las combinaciones patrón–injerto, con magnitud variable según el emparejamiento. Los análisis de bayas confirmaron diferencias entre clones en el momento de maduración, en línea con observaciones previas. Estos resultados subrayan la necesidad de una cuidadosa selección patrón–injerto para mejorar la aclimatación en condiciones cada vez más cálidas y secas., The authors would like to thank the funding received from CIAICO/2021/118 (Conselleria de Educacion, Universidades y Empleo, Generalitat Valenciana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Addendum: Measurement of neutrino oscillation parameters with the first six detection units of KM3NeT/ORCA

  • Aiello, S.
  • Albert, A.
  • Alhebsi, A. R.
  • Alshamsi, M.
  • Alves Garre, S.
  • Ambrosone, A.
  • Ameli, F.
  • Andre, M.
  • Aphecetche, L.
  • Atmani, H.
  • Aublin, J.
  • Badaracco, F.
  • Bailly-Salins, L.
  • Ardid, Miguel|||0000-0002-3199-594X
  • Ardid, S.|||0000-0003-4821-6655
  • García-Méndez, Juan|||0000-0002-1580-0647
  • C.A.~Quiroz-Rangel|||0009-0002-3446-8747
[EN] In this short note, references to data and analysis software to reproduce the results of the paper are given., The authors acknowledge the financial support of the funding agencies: Funds for Scientific Research (FRS-FNRS), Francqui foundation, BAEF foundation. Czech Science Foundation (GAR 24-12702S); Agence Nationale de la Recherche (contract ANR-15-CE31-0020), Centre National de la Recherche Scientifique (CNRS), Commission Europeenne (FEDER fund and Marie Curie Program), LabEx UnivEarthS (ANR-10-LABX-0023 and ANR-18-IDEX-0001), Paris ile-de-France Region, Normandy Region (Alpha, Blue-waves and Neptune), France; Shota Rustaveli National Science Foundation of Georgia (SRNSFG, FR-22-13708), Georgia; This work is part of the MuSES project which has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (grant agreement No 101142396). The General Secretariat of Research and Innovation (GSRI), Greece; Istituto Nazionale di Fisica Nucleare (INFN) and Ministero dell'Universita e della Ricerca (MUR), through PRIN 2022 program (Grant PANTHEON 2022E2J4RK, Next Generation EU) and PON R&I program (Avviso n. 424 del 28 febbraio 2018, Progetto PACK-PIR01 00021), Italy; IDMAR project Po-Fesr Sicilian Region az. 1.5.1; A. De Benedittis, W. Idrissi Ibnsalih, M. Bendahman, A. Nayerhoda, G. Papalashvili, I. C. Rea, A. Simonelli have been supported by the Italian Ministero dell'Universita e della Ricerca (MUR), Progetto CIR01 00021 (Avviso n. 2595 del 24 dicembre 2019); KM3NeT4RR MUR Project National Recovery and Resilience Plan (NRRP), Mission 4 Component 2 Investment 3.1, Funded by the European Union - NextGenerationEU,CUP I57G21000040001, Concession Decree MUR No. n. Prot. 123 del 21/06/2022; Ministry of Higher Education, Scientific Research and Innovation, Morocco, and the Arab Fund for Economic and Social Development, Kuwait; Nederlandse organisatie voor Wetenschappelijk Onderzoek (NWO), the Netherlands; Ministry of Research, Innovation and Digitalisation, Romania; Slovak Research and Development Agency under Contract No. APVV-22-0413; Ministry of Education, Research, Development and Youth of the Slovak Republic; MCIN for PID2021-124591NB-C41, -C42, -C43 and PDC2023-145913-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", for ASFAE/2022/014 and ASFAE/2022 /023 with funding from the EU NextGenerationEU (PRTR-C17.I01) and Generalitat Valenciana, for Grant AST22_6.2 with funding from Consejeria de Universidad, Investigacion e Innovacion and Gobierno de Espana and European Union - NextGenerationEU, for CSIC-INFRA23013 and for CNS2023-144099, Generalitat Valenciana for CIDEGENT/2018/034, /2019/043, /2020/049, /2021/23, for CIDEIG/2023/20, for CIPROM/2023/51 and for GRISOLIAP/2021/192 and EU for MSC/101025085, Spain; Khalifa University internal grants (ESIG-2023-008 and RIG-2023-070), United Arab Emirates; The European Union's Horizon 2020 Research and Innovation Programme (ChETEC-INFRA - Project no. 101008324).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spatiotemporal Communication in Artificial Cell Consortia for Dynamic Control of DNA Nanostructures

  • Llopis-Lorente, Antoni|||0000-0002-6987-9506
  • Ventura-Cobos, Jordi|||0000-0001-8475-9820
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Shao, Jingxin
  • Buddingh, Bastiaan C.
  • van Hest, Jan C. M.
  • Abdelmohsen, Loai K. E. A.
[EN] The spatiotemporal orchestration of cellular processes is a ubiquitous phenomenon in pluricellular organisms and bacterial communities, where sender cells secrete chemical signals that activate specific pathways in distant receivers. Despite its importance, the engineering and investigation of spatiotemporal communication in artificial cell consortia remains underexplored. In this study, we present spatiotemporal communication between cellular-scale entities acting as both senders and receivers. The transmitted signals are leveraged to elicit conformational alterations within compartmentalized DNA structures. Specifically, sender entities control and generate diffusive chemical signals, namely, variations in pH, through the conversion of biomolecular inputs. In the receiver population, compartmentalized DNA nanostructures exhibit changes in conformation, transitioning between triplex and duplex assemblies, in response to this pH variation. We demonstrate the temporal regulation of activated DNA nanostructures through the coordinated action of two antagonistic sender populations. Furthermore, we illustrate the transient distance-dependent activation of the receivers, facilitated by sender populations situated at defined spatial locations. Collectively, our findings provide novel avenues for the design of artificial cell consortia endowed with programmable spatiotemporal dynamics through chemical communication., The authors would like to acknowledge the support from the Dutch Ministry of Education, Culture, and Science (Gravitation programs 024.001.035, 024.003.013, 024.005.020 - Interactive Polymer Materials IPM, and the Spinoza premium), ERC Advanced Grant (Artisym 694120), ERC Advanced Grant Edison (101052997), the Spanish Ministry of Science and Innovation, AEI, and FEDER-EU (project PID2021-126304OB-C41), and the GVA (Project CIPROM/2021/007). A.L.-L. acknowledges support from the MSCA Cofund project oLife, which has received funding from the European Union's Horizon 2020 research and innovation program under the Grant Agreement 847675. A.L.-L. thanks the Spanish Government for his "Ramon y Cajal" Fellowship (RYC2021-034728-I), funded by MCIN/AEI/10.13039/501100011033 and by the European Union << NextGenerationEU >>/<< PRTR >>. A.L-L. also thanks the UPV for funding (Ayuda para potenciar la investigacion postdoctoral de la UPV (PAID-PD-22), Ayuda a Primeros Proyectos de Investigacion (PAID-06-22), Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia (UPV)).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Harmonic and Intermodulation Distortion Analysis in Directly Modulated Lasers Over Local and Remote Photonically Generated Millimeter-Wave Signals

  • Vallejo-Castro, Luis
  • Mora Almerich, José|||0000-0002-2877-4118
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] This paper presents a comprehensive analytical derivation and experimental evaluation of the impact of harmonic and intermodulation distortion on data transmission over local and remote photonically generated millimeter wave (mmW) signals over an optical fronthaul based on a directly modulated laser (DML) and carrier-suppressed (CS) external modulation for frequency up-conversion. Frequency response of different harmonic distortion (HD) and intermodulation (IMD) terms are measured for a 40 GHz signal under back-to-back, local and remote scenarios for the sake of comparison. Furthermore, measurements of error vector magnitude (EVM) of single and multiband QPSK signals are presented in good agreement with the frequency measurements for (2 omega(k)), (omega(k) - omega(l)) and (omega(k) + omega(l))-type distortion terms. Wide-band signals with in-band distortion and multiband signals with out-of-band distortion are examples that need to be transmitted over local generation mmW approach in cloud-radio access networks (C-RAN), in spite of the high performance achieved by remote generation approach due to the combined effect of fiber dispersion and laser chirp. Results will serve as valuable guidelines for 6G networks deployment in concrete application scenarios., This work was supported by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe through the regional project Generalitat Valenciana (PROMETEO 2021/015) under Grant RTI2018-101658B-I00 FOCAL.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of Research Organizations Registry (ROR) identifiers in author academic profiles: the case of Google Scholar Profiles, Uso de identifcadores del Registro de Organizaciones de Investigación (ROR) en perfles académicos de autor: el caso de Google Scholar Profles

  • Orduña-Malea, Enrique|||0000-0002-1989-8477
  • Bautista-Puig, Núria
[EN] Research organizations¿ persistent identifiers allow for reducing affiliation ambiguities, enable accurate institutional analyses and favor the design of modern online scholarly databases suited for research discovery and research evaluation. However, few studies have attempted to quantify their degree of use. The purpose of this work is precisely to determine the use of Research Organizations Registry (ROR) IDs in author academic profiles, specifically in Google Scholar Profiles (GSP). To do this, all the Google Scholar profiles including the term ROR in any of the public descriptive fields were collected and analyzed. The results evidence a low use of ROR IDs (1,033 profiles), mainly from a few institutions (e.g. Pontificia Universidad Javeriana in Colombia, and Escuela Superior Politécnica del Litoral in Ecuador hold 55.7% of all profiles), from low citationbased impact authors (45.1% of profiles attain less than 100 citations each), belonging mainly to Social Sciences (26.3%), Engineering fields (25.3%), and Natural Sciences (22.2%). Although Google Scholar does not facilitate the inclusion of identifiers, it seems that the world¿s leading research institutions are not recommending their researchers include these identifiers in their profiles yet., [ES] Los identificadores persistentes de las organizaciones de investigación permiten reducir las ambigüedades de afiliaciones, realizar análisis institucionales precisos y favorecen el diseño de modernas bases de datos online académicas adecuadas para el descubrimiento y la evaluación la investigación. Sin embargo, pocos estudios han intentado cuantificar su grado de utilización. El propósito de este trabajo es precisamente determinar el uso de los ID del Registro de Organizaciones de Investigación (ROR) en los perfiles académicos de los autores, específicamente en los perfiles de Google Scholar (GSP). Para ello, se recopilaron y analizaron todos los perfiles de Google Scholar que incluían el término ROR en alguno de los campos descriptivos públicos. Los resultados evidencian un bajo uso de identificadores ROR (1.033 perfiles), principalmente de pocas instituciones (por ejemplo, la Pontificia Universidad Javeriana en Colombia y la Escuela Superior Politécnica del Litoral en Ecuador tienen el 55,7% de todos los perfiles), de autores de bajo impacto basado en citas (el 45,1% de los perfiles alcanzan menos de 100 citas cada uno), pertenecientes principalmente a los campos de Ciencias Sociales (26,3%), Ingenierías (25,3%) y Ciencias Naturales (22,2%). Aunque Google Scholar no facilita la incorporación de identificadores, parece que las principales instituciones de investigación del mundo aún no recomiendan a su personal investigador la inclusión de estos identificadores en sus perfiles, This project has been supported by the project UNIVERSEO (Ref. GV/2021/141), funded by the regional government (Generalitat) of Valencia (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Octahedrality and Gâteaux smoothness

  • Cobollo-Gómez, Christian|||0000-0002-5901-5798
  • Hájek, P.
[EN] We prove that every Banach space admitting a Gâteaux smooth norm and containing a complemented copy of I1 has an equivalent renorming which is simultaneously Gâteaux smooth and octahedral. This is a partial solution to an open problem from the early nineties. (c) 2024 The Author(s). Published by Elsevier Inc. This is an open access article under the CC BY-NC license (http://creativecommons .org /licenses /by -nc /4 .0/)., The present work was done while the first author was on a PhD stay at the Department of Mathematics of the Faculty of Electrical Engineering at the Czech Technical University in Prague, and he is grateful for all the support and kindness received there. The authors thank the anonymous referee for his/her helpful comments that improved the quality of the manuscript. The first author was supported by Generalitat Valenciana (through Project PROMETEU/2021/070 and the predoctoral fellowship CIACIF/2021/378) and by MICIU/AEI/10.13039/501100011033 and by ERDF/EU (through Projects PID2019-105011GB-I00, PID2021-122126NB-C33 and PID2022-139449NB-I00). The second author was supported by GA23-04776S and SGS24/052/OHK3/1T/13 of CTU in Prague.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Incorporating speed forecasting and SOC planning into predictive ECMS for heavy-duty fuel cell vehicles

  • Piras, M.
  • De Bellis, V.
  • Malfi, E.
  • Desantes J.M.|||0000-0002-4124-9393
  • Novella Rosa, Ricardo|||0000-0002-5123-6924
  • López-Juárez, Marcos|||0000-0001-9886-4728
[EN] This study presents a novel approach specifically designed for real-world driving scenarios of heavy-duty fuel cell vehicles, named P-ECMS. The P-ECMS addresses both charge-sustaining and charge-depleting modes of the battery to optimize the vehicle¿s energy management. To this aim, the P-ECMS integrates a velocity prediction layer and a SOC planning layer. The velocity prediction layer utilizes a realistic driving dataset obtained from GT-Real Drive, using information from the TEN-T routes, to accurately predict the speed of the vehicle. The SOC planning layer, leveraging information from a map service provider, plans a target SOC trajectory at the beginning of the driving mission. It employs a neural network trained on the policy obtained from a standard optimized ECMS for various driving cycles and initial SOC values, aiming to achieve a final SOC of 30%. In charge-sustaining operations, the P-ECMS is compared to a conventional Adaptive-ECMS, the reference ECMS (Standard-ECMS), and a rule-based strategy across the HDDT driving cycle. The evaluation focuses on battery SOC sustenance, equivalence factor evolution, and hydrogen consumption. Results show that both the P-ECMS and the A-ECMS outperform the S-ECMS in terms of SOC sustenance, with the P-ECMS achieving a significant 2% reduction in hydrogen consumption compared to the A-ECMS. The study demonstrates that the P-ECMS advantages extend to battery discharge conditions, as it achieves a remarkable reduction in consumption compared to an optimal Charge-Depleting/Charge-Sustaining (up to 5%) when employing a linear battery discharge planning. The integration of the SOC planning layer proves additional benefits, and a comparison between the P-ECMS with linear battery discharge planning and the P-ECMS with the SOC planning layer integrated shows the advantages of SOC trajectory planning for different segment lengths. The study suggests an optimal segment length between 3 km and 8 km, obtained with the necessary data from a map service provider., This research has been partially funded by the Generalitat Valenciana (Conselleria d Innovació, Universitats, Ciència i Societat Digital) as a part of the DEFIANCE research project (CIPROM/2021/039) through the PROMETEO funding program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Machine-learning-derived predictive score for early estimation of COVID-19 mortality risk in hospitalized patients

  • González-Cebrián, Alba
  • Borràs-Ferrís, Joan
  • Ordovás-Baines, Juan Pablo
  • Hermenegildo-Caudevilla, Marta
  • Climente-Martí, Mónica
  • Vitale, Raffaele
  • Palací-López, Daniel
  • Sierra-Sánchez, Jesús Francisco
  • Saez de la Fuente, Javier
  • Tarazona, Sonia|||0000-0001-5346-1407
  • Ferrer, Alberto|||0000-0001-7244-5947
[EN] The clinical course of COVID-19 is highly variable. It is therefore essential to predict as early and accurately as possible the severity level of the disease in a COVID-19 patient who is admitted to the hospital. This means identifying the contributing factors of mortality and developing an easy-to-use score that could enable a fast assessment of the mortality risk using only information recorded at the hospitalization. A large database of adult patients with a confirmed diagnosis of COVID-19 (n = 15,628; with 2,846 deceased) admitted to Spanish hospitals between December 2019 and July 2020 was analyzed. By means of multiple machine learning algorithms, we developed models that could accurately predict their mortality. We used the information about classifiers¿ performance metrics and about importance and coherence among the predictors to define a mortality score that can be easily calculated using a minimal number of mortality predictors and yielded accurate estimates of the patient severity status. The optimal predictive model encompassed five predictors (age, oxygen saturation, platelets, lactate dehydrogenase, and creatinine) and yielded a satisfactory classification of survived and deceased patients (area under the curve: 0.8454 with validation set). These five predictors were additionally used to define a mortality score for COVID-19 patients at their hospitalization. This score is not only easy to calculate but also to interpret since it ranges from zero to eight, along with a linear increase in the mortality risk from 0% to 80%. A simple risk score based on five commonly available clinical variables of adult COVID-19 patients admitted to hospital is able to accurately discriminate their mortality probability, and its interpretation is straightforward and useful., The authors acknowledge the support provided by the Spanish Ministry of Science and Innovation (PID2020-119262RB-I00), the Generalitat Valenciana (AICO/2021/111), the UPV Research and Development Support Programme PAID-01-17, and the European Social Fund (ACIF/2018/165).