Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 71
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Contribución de congreso (ConferenceOutput)

A far infrared spectrometer for SPICA mission: optical E2E of SAFARI

  • Fernández, María Manuela
  • Arrazola Pérez, D.
  • Jellema, W.
  • González, Luis M.
  • García, R.
  • Belenguer Dávila, T.
  • Torres Redondo, J.
  • Restrepo, R.
  • Eggens, M.
  • Evers, J.
  • Dieleman, P.
This paper describes the end-to-end opto-mechanical design of the SAFARI instrument on SPICA and the analysis of the spectrometer optical performances. SAFARI instrument is a high sensitivity grating-based spectrometer operating in the 34-230 μm wavelength range. The scientific drivers lead to the implementation of two modes of operation. The Low- Resolution (LR) or nominal mode (R~300) and the High-Resolution (HR), that implies to include a Martin-Puplett Fourier Transform Spectrometer (MP-FTS) to achieve the required spectral resolution (R~2000-11000). The optical system is all-reflective and consists of three main modules. The input optics module (IOM) is an unobscured reflective Offner relay. In the IOM a Beam Steering Mirror (BSM) is included for spatial modulation and to allow efficient sky mapping. The Band and Mode Distributing Optics (BMDO) module splits the radiation band into the four different spectral bands and includes the MP-FTS. The field image existing at the output of the BMDO constitutes the entrance to the Grating Module Optics (GM). These modules provide spectral dispersion by means of linear and reflective diffraction gratings and the final image onto the detectors. Performances of the GMs are high demanding with a detector divided into 2 sub-bands with a different pixel size for each sub-band., Authors would like to thanks for the deep collaboration within all parts (national institution, agencies and private companies) involved from all different countries. This material is based upon work supported and funded by Spanish Ministerio de Ciencia y Universidades under grant ESP2017-86582-C4-4-R., Peerreview
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Enhancing Precision Medicine: An Automatic Pipeline Approach for Exploring Genetic Variant-Disease Literature

  • Contreras-Ochando, Lidia
  • Pla Santamaría, Ferran
  • Segarra Soriano, Encarnación
  • Marco-García, Pere|||0009-0003-7026-3543
  • León-Palacio, Ana|||0000-0003-3516-8893
  • Hurtado Oliver, Lluis Felip|||0000-0002-1877-0455
[EN] Advancements in genomics have generated vast amounts of data, requiring efficient methods for exploring the relationships between genetic variants and diseases. This paper presents a pipeline approach that automatically integrates diverse biomedical databases, including NCBI Gene, MeSH, LitVar2, PubTator, and SynVar, for retrieving comprehensive information about genes, variants, diseases, and associated literature. The pipeline consists of multiple stages: querying and searching across the different databases, extracting relevant data, and applying filters to refine the results. Its goal is to bridge the gap in information retrieval related to genetic variants and diseases by providing a systematic framework for discovering relevant literature. The pipeline uses open-access sources to uncover additional articles not referenced in expert reports that mention the genetic variants of interest. In this paper, we present the methodology of the pipeline, discuss its limitations and highlight its potential for advancing information systems, data management, and interoperability in the domains of genomics and precision medicine., This work is partially supported by MCIN/AEI/10.13039/501100011033, by the 'European Union' and 'NextGenerationEU/MRR', and by 'ERDF A way of making Europe' under grants PDC2021-120846-C44 and PID2021-126061OB-C41. It is also partially supported by the Generalitat Valenciana underproject CIPROM/2021/023. We would like to thank the authors of LitVar2 for their valuable assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

ELiRF-VRAIN at BioNLP Task 1B: Radiology Report Summarization

  • Ahuir-Esteve, Vicent|||0000-0001-5636-651X
  • Hurtado Oliver, Lluis Felip|||0000-0002-1877-0455
  • Segarra Soriano, Encarnación
[EN] This paper presents our system at the Radiology Report Summarization Shared Task-1B of the 22nd BioNLP Workshop 2023. Inspired by the work of the BioBART model, we continuously pre-trained a general domain BART model with biomedical data to adapt it to this specific domain. In the pre-training phase, several pre-training tasks are aggregated to inject linguistic knowledge and increase the abstractivity of the generated summaries. We present the results of our models, and also, we have carried out an additional study on the lengths of the generated summaries, which has provided us with interesting information., This work is partially supported by MCIN/AEI/10.13039/501100011033, by the "European Union and 'NextGenerationEU/MRR', and by 'ERDF A way of making Europe' under grants PDC2021-120846-C44 and PID2021-126061OB-C41. It is also partially supported by the Generalitat Valenciana under project CIPROM/2021/023, and by the Spanish Ministerio de Universidades under the grant FPU21/05288 for university teacher training.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Herramienta de configuración para sistemas IMA-SP

  • Valiente Moreno, Yolanda|||0000-0002-4079-9916
  • Balbastre, Patricia|||0000-0001-9458-4083
  • Simó Ten, José Enrique|||0000-0003-4677-7627
[ES] En este trabajo se describe la definición, diseño, implementaci ón y prueba del con- junto de herramientas necesarias para realizar las actividades del proceso de desarro- llo IMA-SP (Integrated Modular Avionics for SPace). Además, se definirá el modelo de datos, con los archivos asociados, que describen la configur ación completa de un sistema con particiones y la evaluación de la viabilidad del si stema; el desarrollo de un prototipo del conjunto de herramientas, que se llamará IMA-S P SDT (System De- velopment Toolkit) y la demostración de la herramienta sobre un caso de estudio, Este articulo ha sido subvencionado por el Ministerio de Economía y Competitividad bajo los proyectos TIN2014- 56158-C4-1-P y TIN2014- 56158-C4-4-P
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Safety Assessment of Shear Strength Current Formulations for Composite Concrete Beams without Web Reinforcement

  • Rueda-García, Lisbel|||0000-0002-2061-1656
  • Bonet Senach, José Luís|||0000-0002-6687-5307
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
  • Fernández Prada, Miguel Ángel|||0000-0001-5527-7793
[EN] Construction with precast concrete elements without web reinforcement and cast-in-place concrete on them to enhance the overall structure's integrity is a widespread practice in building construction. However as these composite elements' vertical shear strength has not been studied in-depth, a clear criterion about cast-in-place concrete's contribution to shear resistance is still a pending matter. The present study intends to reach practical conclusions about the shear strength assessment of composite concrete elements without web reinforcement. To do so, the shear strengths of 36 specimens, provided by existing shear formulations, were compared: 19 specimens tested by the authors, in which the existence of an interface between concretes, the cross-sectional shape and the concrete compressive strengths of the beam and slab were studied; and 17 specimens taken from a previous study about composite elements by Kim et al. (2016). The applied shear formulations were those of EC2-04, Draft 7 of EC2-20, fib MC-10, ACI 318-19 and the model proposed by Kim et al. (2016). Firstly, specimens' shear strength was calculated by considering that only the beam resisted shear. Secondly according to ACI 318-19 indications about assessing composite elements¿ shear strength, the entire composite element's effective depth was used considering the lower of the compressive strengths of the beam's and slab's concretes and the weighted average of the compressive strengths. Additionally,the entire effective depth and the beam's concrete compressive strength were used. Codes formulations were more precise when estimating the monolithic specimens' shear strengths than those of composites. Therefore, the development of an adapted methodology to assess these elements¿ shear strengths is needed. EC2-20 obtained the most accurate results and gave quite good estimations for composite elements when the entire effective depth and weighted average of the concretes compressive strengths were considered., This study forms part of the research conducted at the Concrete Science and Technology University Institute (ICITECH) of the Universitat Politècnica de València (UPV, Spain) with concrete supplied by Caplansa. The project has been supported by the Spanish Ministry of Science and Innovation through Projects BIA2015-64672-C4-4-R and RTI2018-099091-B-C21-AR; the Regional Government of Valencia through Project AICO/2018/250, and the European Union with FEDER funds. The authors thank the Spanish Ministry of Economy and Business for Grant BES-2016-078010.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Shear strength assessment of RC members: influence of shear reinforcement and yielding of the flexural reinforcement

  • Monserrat López, Andrea
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
[EN] An extensive experimental programme consisting of 15 shear tests on continuous reinforced concrete beams was carried out to assess the shear strength of beams with and without shear reinforcement. The influence of large flexural strains in the shear strength was analysed as the tests were designed to fail in shear after yielding of the flexural reinforcement. The assessment of the shear strength was investigated based on the contribution of the various potential shear-transfer actions following the possibilities offered by Digital Image Correlation (DIC). In this field, several approaches accounting for the role of the various shear-transfer actions have recently been proposed, such as the Critical Shear Crack Theory or the Compression Chord Capacity Model, and significant advances on the analysis of the activation of these shear-transfer actions have been performed by the use of DIC. In this work, detailed surface displacement measurements were performed by means of DIC, allowing to track the development and kinematics of the critical shear crack leading to failure. Based on this information, together with suitable constitutive models, the amount of shear transferred by each shear-transfer action was estimated at different load levels and at failure. The calculated shear strength of the specimens was obtained as the sum of the contribution of the various shear-transfer actions at failure and its comparison with the experimental results showed consistent agreement for the different cases. Based on the results, different conclusions and implications about the contribution of the various shear-transfer actions at shear failure are presented. In general, the contribution of each shear-transfer action is strongly influenced by cracking patterns and by the location, shape and kinematics of the critical shear crack., This research was funded through grants from the Ministerio de Economía y Competitividad of Spain with the research project BIA2015-64672-C4-4-R. The experimental program was developed in the Laboratory of Concrete of the Institute of Concrete Science and Technology (ICITECH) of the Universitat Politècnica de València (UPV). Andrea Monserrat has been particularly supported by the Conselleria d'Educació, Investigació, Cultura i Esport of Generalitat Valenciana (Orden 6/2015, DOCV n. 7615 15.09.2015) with the European Regional Development Fund (ERDF) allocated by the EU. VIC2D software was employed during the research stay of Andrea Monserrat at the EPFL (Lausanne, Switzerland).
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Contribución de congreso (ConferenceOutput)

Breve noticia del gallego, de su historia y de su variación

RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Arquitectura de comunicaciones de tiempo real para robots modulares basados en ROS

  • Munera, Eduardo
  • Poza-Luján, José-Luis
  • Posadas-Yagüe, Juan-Luis
  • Blanes Noguera, Francisco
  • Simo, Jose
[Resumen] Actualmente, las plataformas para robots que implementan ROS son ampliamente usadas en investigación. Éstas han probado ofrecer una solución fiable para reutilizar algoritmos. No obstante, estos cuentan con ciertos inconvenientes. Aunque la arquitectura ROS ha sido diseñada con la posibilidad de trabajar de forma distribuida, este diseño presenta algunos problemas al gestionar un gran numero de dispositivos los cuales requieren de un flujo de datos en tiempo real. En este trabajo se presenta una arquitectura de comunicaciones para solucionar este problema. Además se valida dicha arquitectura por medio de un robot modular a partir de dispositivos totalmente desacoplados. Un robot modular puede presentarse como un Sistema de Control Distribuido (DCS, por sus iniciales en inglés), donde las tasas de transmisión y el flujo de datos debe ser acotado para poder garantizar una correcta ejecución. Por lo tanto, se detalla como solucionar el problema de comunicación distribuida entre nodos ROS posibilita el intercambio de datos de forma fácil y segura. Como consecuencia se propicia el desarrollo de sistemas modulares basados en ROS. Por ultimo se realiza una comparación entre el desempeño del sistema obtenido cuando se implementa una distribución ROS clásica, y el obtenido cuando se utiliza la arquitectura de comunicaciones propuesta., Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovación de España (MICINN): CICYT project M2C2 Co-diseño de sistemas de control con criticidad mixta basado en misiones TIN2014-56158-C4-4-P y el programa PAID (Universidad Politécnica de Valencia): UPV-PAIDFPI-2013, Universitat Politècnica de València; UPV-PAIDFPI-2013, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Desarrollo de un módulo de comunicaciones para protocolo FINS-TCP sobre servidor OPC-UA

  • Blanes Noguera, Francisco
  • Benlloch Faus, Andrés
[Resumen] El presente trabajo aborda el diseño y desarrollo de un módulo Java de comunicaciones que implementa el protocolo de comunicaciones FINS-TCP, protocolo diseñado por la empresa OMRON para llevar a cabo comunicaciones con los PLC’s entre un equipo (computador) y un PLC, o entre varios PLC’s. Una vez diseñado el módulo de comunicaciones se llevara a cabo el despliegue del mismo sobre diferentes servidores OPC-UA (Open Platform Communications), con diferentes escenarios de uso. Los servidores OPC-UA utilizados para llevar a cabo el testeo del módulo son Ignition, de la empresa Inductive Automation, y Prosys OPC-UA Server, de la empresa Prosys LTD. Ambos basan su implementación en lenguaje de programación Java, lo que permite la portabilidad de los mismos a entornos muy diferentes. Una vez desarrollado llevamos a cabo el despliegue del mismo sobre un ordenador y sobre un sistema empotrado BeagleBone Black, de forma que se evaluara la viabilidad tanto en entornos potentes de servidor, como en sistemas con recursos limitados., Este trabajo ha sido parcialmente financiado por el Ministerio de Ciencia e Innovación de España (MICINN); proyecto CICYT M2C2 “Codiseño de sistemas de control con criticidad mixta basado en misiones” TIN2014-56158-C4-4-P, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Planificación multinúcleo en sistemas particionados

  • Brocal, Vicent
  • Crespo, Alfons
  • Balbastre, Patricia
[Resumen] Actualmente, las aplicaciones embebidas se consideran de complejidad creciente y, como consecuencia, de mayor dificultad para su desarrollo y validación. Debido a estas características, existe un gran interés en ejecutar múltiples aplicaciones sobre una única plataforma (mono o multinúcleo). En los sistemas de tiempo real, cada vez más se ejecutan aplicaciones con diferentes niveles de criticidad donde múltiples componentes con diferentes restricciones de tiempo real se integran en una misma plataforma computacional. Al mismo tiempo en el que proliferan los sistemas de criticidad mixta, la plataforma computacional está migrando de mono núcleo a multinúcleo. El presente trabajo describe la planificación de sistemas particionados multinúcleo, desde la asignación de tareas a núcleos hasta la generación de la planificación para cada procesador., Este articulo ha sido subvencionado por el Ministerio de Economía y Competitividad bajo los proyectos TIN2014-56158-C4-1-P y TIN2014-56158-C4-4-P, https://doi.org/10.17979/spudc.9788497498081
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Paving the way for Large-Scale Combinatorial Auctions

  • Cruz-Mencia, Francisco
  • Cerquides, Jesús
  • Espinosa, Antonio
  • Moure, Juan C.
  • Rodríguez-Aguilar, Juan Antonio
The Winner Determination Problem (WDP) in Combinatorial Auctions comes up in a wide range of applications. Linear Programming (LP) relaxations are a standard method for approximating combinatorial optimisation problems. In this paper we propose how to encode the WDP so that it can be approximated with AD3. Moreover, we contribute with PAR-AD3, the first parallel implementation of AD3. We show that while AD3 is up to 4.6 times faster than CPLEX in a single-thread execution, PAR-AD3 is up to 23 times faster than parallel CPLEX in an 8-core architecture. Copyright © 2015, International Foundation for Autonomous Agents and Multiagent Systems (www.ifaamas.org). All rights reserved., This research has been supported by MICINN-Spain under contracts TIN2011-28689-C02-01, TIN2013-45732-C4-4-P and TIN2012-38876-C02-01., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Caracterización de la anisotropía magnética perpendicular de láminas continuas y multicapas de DyCo5

  • Blanco-Roldán, C.
  • Hierro-Rodríguez, Aurelio
  • Díaz, Javier
  • Valdés-Bango, F.
  • Teixeira, J. M.
  • Rubio, Honorino
  • Martín, José Ignacio
  • Quirós, Carlos
  • Alameda, J. M.
Resumen del póster presentado a la XXXV Reunión Bienal de la Real Sociedad Española de Física y al 25º Encuentro Ibérico de Enseñanza de la Física, celebrados en Gijón (España) del 13 al 17 de julio de 2015.-- et al., [Introducción]: Las láminas delgadas de aleaciones amorfas de tierra rara y metal de transición han sido ampliamente estudiadas por la posibilidad de controlar sus propiedades magnéticas mediante una elección adecuada de su composición y grosor. En este trabajo analizamos el comportamiento magnético de dos aleaciones amorfas de DyCo5, una preparada en forma de lámina continua y otra en forma de multicapa de periodo ultrafino, mediante el análisis combinado de ciclos de histéresis globales, obtenidos mediante técnicas de magnetometría, y de ciclos específicos al Dy y al Co, obtenidos mediante dicroísmo magnético circular de rayos X (XMCD). Además, los resultados obtenidos se comparan con los de láminas de referencia de YCo5, preparadas con el fin de extraer el comportamiento magnético de los átomos de Co en un entorno químico similar al de las aleaciones de DyCo5. Nuestros resultados complementan los publicados recientemente para aleaciones de DyCo3, aunque en nuestro caso hemos realizado una caracterización a campos magnéticos más elevados y hemos aplicado una interpretación compatible con los modelos esperimagnéticos característicos de este sistema. [Experimental]: Las muestras, de 35 nm de grosor, han sido preparadas por pulverización catódica de blancos de Dy (pureza 99.9 % atómico), Y (99.9 % atómico) y Co (99.99 % atómico) a una presión de Ar+ de 2.9 x 10-3 mbar. Todas las muestras tienen una capa protectora de 3.5 nm de grosor y una capa de transición, directamente sobre el sustrato, de 5 nm de grosor, ambas de Al. Su composición ha sido estimada mediante medidas de fluorescencia de rayos X obtenidas en una microsonda electrónica (EPMA, modelo CAMECA SX-100) de los Servicios Científico-Técnicos de la Universidad de Oviedo. Las propiedades magnéticas se han determinado utilizando dos métodos complementarios. En primer lugar, medidas de magnetometría por muestra vibratoria (VSM) con campos magnéticos perpendiculares a la superficie (hasta 9 T) y mediante un dispositivo superconductor de interferencia cuántica (SQUID), con campos paralelos y perpendiculares a la superficie de la muestra (hasta 6 T), han dado cuenta del comportamiento magnético global del sistema entre 5 K y 300 K. Por otro lado, ciclos de histéresis específicos del Dy y del Co se han obtenido mediante XMCD (hasta 6 T) utilizando radiación sincrotrón circularmente polarizada a energías correspondientes a los bordes M5 del Dy y L3 del Co. Tanto en el caso del DyCo5 como del YCo5, se han crecido dos tipos de muestras. En el primer caso, muestras denominadas S, se han encendido simultáneamente ambos blancos de Dy y Co hasta completar los 35 nm de grosor. En el segundo caso, muestras denominadas A, se han ido encendiendo y apagando alternativamente los blancos de Dy y de Co, preparando capas puras alternas de Dy y de Co con grosores nominales en el entorno de la monocapa, pero con una composición neta promedio y espesor final similares a los de la muestra DyCoS. Las medidas de composición indican que ambas muestras están en torno a la estequiometría esperada, con una diferencia del 1-2 % atómico. El mismo proceso de crecimiento se ha llevado a cabo con las muestras de referencia de YCo5., [Resultados]: Las medidas de magnetometría realizadas con campos aplicados en el plano y fuera del plano de la lámina indican que las muestras de DyCo5 tienen anisotropía perpendicular, mientras que las de YCo5 carecen de ella. Teniendo en cuenta que el YCo5 y el DyCo5 tienen una estructura atómica y un entorno químico similares, con la salvedad de que el Y es no magnético y el Dy sí lo es, se puede concluir que el Co no es el causante de la anisotropía perpendicular observada en las muestras de DyCo5. Además, se observa que los campos coercitivos perpendiculares aumentan al enfriar, en buen acuerdo con lo esperado en modelos de anisotropía aleatoria y canje. Se confirma el comportamiento ferrimagnético de las aleaciones con temperaturas de compensación de 120 K para la muestra DyCoS y 90 K para la lámina DyCoA. La diferencia en el valor de temperatura de compensación puede deberse a la ligera modificación de la composición mencionada anteriormente, puesto que en este tipo de materiales se ha observado que variaciones muy leves de composición, en torno al 1 % atómico, generan cambios de la temperatura de compensación de varias decenas de K. Por otro lado, los ciclos XMCD selectivos al elemento tienen sentidos opuestos para el caso del Dy y del Co. Además, se observan pendientes en los ciclos compatibles con la presencia de una distribución de momentos magnéticos en forma de conos, de acuerdo con lo esperado en aleaciones esperimagnéticas. La evolución de estos ciclos en función de la temperatura confirma la inversión de la orientación de los momentos magnéticos del Dy y del Co a ambos lados de la temperatura de compensación y sugiere cambios en la estructura de los conos observados a medida que se enfría el sistema., Este trabajo ha sido financiado por el proyecto MINECO FIS2013-45469. C. B.-R. agradece financiación a través del programa JAE-Predoc del CSIC. A. H.-R. y J. M. T. agradecen la financiación de la FCT Portuguesa (Refs. SFRH/BPD/90471/2012 y SFRH/BPD/72329/2010)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Tuning interfacial domain walls in GdCo/Gd/GdCo' spring magnets

  • Blanco-Roldán, C.
  • Quirós, Carlos
  • Vélez, María
  • Alameda, J. M.
  • Martín, José Ignacio
Resumen del póster presentado a la XXXV Reunión Bienal de la Real Sociedad Española de Física y al 25º Encuentro Ibérico de Enseñanza de la Física, celebrados en Gijón (España) del 13 al 17 de julio de 2015.-- et al., Exchange coupled multicomponent ―spring-magnet” systems that combine ferrimagnetic and ferromagnetic materials are the focus of a renewed interest due to their potential as recording media with tailored magnetic behavior. Different geometries such as thin film heterostructures, coreshell nanoparticles or hard/soft lateral nanocomposites are employed in order to optimize system properties for specific applications. In particular, amorphous ferrimagnetic Rare Earth (RE) - Transition Metal (TM) alloys, with their strongly temperature dependent magnetic properties allow to tune important parameters such as spin polarization and magnetic moments and multilayers based in these ferrimagnetic alloys have been used to produce different magnetic behaviors such as macroscopic ferrimagnet states, macroscopic spin-flip like metamagnetic states or giant exchange bias. In these systems, exchange coupling gives rise to interfacial domain walls (DW) that govern the full magnetic behavior of the multicomponent system. GdxCo1-x amorphous alloys are RE-TM ferrimagnetic materials where the Gd and Co moments are antiferromagnetically coupled and collinear. Depending on the composition and temperature, the net magnetization in these alloys can be aligned either with the Co or the Gd moments. Therefore, it is possible to prepare exchange coupled GdxCo1-x/GdyCo1-y bilayers in which the net magnetization of each of the layers is dominated by a different kind of magnetic moments (i.e., by the Gd or Co moments). Interfacial exchange coupling between Co atoms at each layer results in the antiparallel alignment of the magnetization in each of them at remanence. Then, in the presence of an in-plane magnetic field of increasing magnitude, the system must switch to a parallel magnetization configuration and a Bloch wall across the thickness is created at the interface. The extension, position and symmetry of these walls respect to the interface plane, and their field and temperature dependence control the characteristic switching fields in the hysteresis loop. In this work, we have prepared GdxCo1-x/Gd/GdyCo1-y trilayers by sputtering in which a Gd layer with variable thickness is introduced at the interface in order to modulate the strength of the ―spring magnet” effect in the system. As Gd thickness increases from 0 to 30 nm, coupling between the upper GdxCo1-x and lower GdyCo1-y layers weakens due to the much smaller Gd-Gd exchange interactions in comparison with Co-Co exchange. Magnetooptical Kerr effect hysteresis loops (sensitive to Co magnetization at the upper layer) show that, as a consequence, the characteristic fields for nucleation of DWs across the thickness are reduced and the ―spring-magnet” effect becomes restricted to a lower temperature range., X-ray resonant magnetic scattering (XRMS) measurements at APS Argonne NL have been used to determine the depth profile of Gd magnetic moments configuration as a function of applied magnetic field. Figure 1 shows XRMS data at 50 K for a 50 nm Gd35Co65/8 nm Gd/50 nm Gd11Co89 trilayer at different applied fields (either with or without interfacial DW). Fitted magnetization depth profiles of XRMS reflectivity data in a 50 nm Gd35Co65/50 nm Gd11Co89 bilayer show clear asymmetries in DW width at each side of the interface (9.4 nm at Gd11Co89 vs. 2.2 nm at Gd35Co65), in agreement with the different saturation magnetization in each layer. In the trilayers, this asymmetry is enhanced and the DW becomes localized at the Gd/Gd11Co89 interface in which Gd-Gd exchange interactions determine the strength of the effective ―spring-magnet”., Work supported by Spanish MINECO under grants FIS2008-06249 and FIS2013-45469. Work at Argonne was supported by the U.S. Department of Energy, Office of Science, under Contract No. DE-AC02-06CH11357., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Topological defects in weak perpendicular magnetic anisotropy nanostructures

  • Vélez, María
Resumen del trabajo presentado al International Workshop on Vortex Matter in Superconductors, celebrado en El Escorial, Madrid (España) del 10 al 15 de mayo de 2015., Complex spin textures found in different kinds of magnetic systems can be described in terms of topological defects in the magnetization such as vortices in magnetic dots, half vortices and domain walls in nanowires, dislocations and disclinations in weak stripe domains or skyrmions in helical magnets. These magnetic defects usually present an enhanced stability due to their non-trivial topology which makes them interesting for magnetic logic and memory devices. Also, interplay between complex magnetic configurations and superconductivity provides a rich playground to tune the phase diagram of superconducting/magnetic hybrids. In this work, we present a study of topological defects in weak perpendicular magnetic nanostructures fabricated by e-beam lithography and sputtering on amorphous Nd-Co films and multilayers. First, periodic film thickness modulations have been used to fabricate lateral magnetic multilayers in the magnetic stripe domain pattern. During inplane hard axis magnetization reversal, magnetic stress at the interfaces leads to the dissociation of high-Burgers vector dislocations into ½ disclination pairs. Coupling between in-plane closure domain structure and ½ disclinations leads to the nucleation of arrays of ½ skyrmion (meron) magnetic textures (see Fig. 1) depending on magnetic history and nanostructure geometry. Then, micromagnetic simulations and microscopy techniques have been used to analyse the conditions for magnetic meron nucleation and propagation during magnetization reversal of extended thin films and multilayers of weak perpendicular anisotropy materials., Work supported by Spanish MINECO (FIS2013-45469)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Detección de grama (Cynodon dactylon) en viña mediante imágenes adquiridas por un vehículo aéreo no tripulado (UAV)

  • Castro, Ana Isabel de
  • Peña Barragán, José Manuel
  • Torres-Sánchez, Jorge
  • Jiménez-Brenes, Francisco Manuel
  • Valencia, Francisco
  • López Granados, Francisca
Trabajo presentado a las II Jornadas del Grupo de Viticultura y Enología (SECH), celebradas en Madrid el 3 y 4 de noviembre de 2016., equilibrar el vigor y rendimiento de la viña, resultando en una mejora de la calidad de la cosecha. Un problema creciente de este sistema de cultivo es el aumento de las poblaciones de la mala hierba gramínea Cynodon dactylon, especie perenne altamente competitiva y difícilmente controlable. El objetivo de este trabajo consistió en la detección en época temprana de C. dactylon en viñedos con cubierta vegetal y, seguidamente, el diseño de mapas de tratamiento localizado aplicando tecnología basada en vehículos aéreos no tripulados (UAV). El trabajo se realizó en parcelas de viña localizadas en Raimat (Lleida), en donde se tomaron imágenes con el UAV en Febrero-2016, coincidiendo con la parada vegetativa de la grama. Aplicando técnicas de análisis de imágenes basado en objetos, se desarrolló un algoritmo que permitió la clasificación automática de las imágenes en cuatro clases principales (viña, suelo desnudo, grama y cubierta vegetal) y la generación de mapas de grama para su control localizado. La aplicación de estas técnicas de viticultura de precisión de forma prolongada (2-3 años agrícolas), además de disminuir el coste económico y medioambiental del tratamiento, podría erradicar la mala hierba y favorecer el paso a producción ecológica, aumentando su valor añadido., Esta investigación fue financiada por el proyecto AGL2014-52465-C4-4R (Ministerio de Economía y Competitividad, fondos FEDER: Fondo Europeo de Desarrollo Regional). La investigación de Jorge Torres-Sánchez y el Dr. José M. Peña fue financiada por los programas FPI (BES-2012-052424) y Ramón y Cajal (MINECO), respectivamente., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Caracterización 3-D de viñas mediante imágenes procedentes de un vehículo aéreo no tripulado para el diseño de tratamientos localizados

  • Torres-Sánchez, Jorge
  • López Granados, Francisca
  • Castro, Ana Isabel de
  • Jiménez-Brenes, Francisco Manuel
  • Peña Barragán, José Manuel
Trabajo presentado a las II Jornadas del Grupo de Viticultura y Enología (SECH), celebradas en Madrid el 3 y 4 de noviembre de 2016., El manejo localizado de cultivos tiene como objetivo reducir la cantidad de insumos aplicados al campo, racionalizando los tratamientos según las necesidades reales derivadas de un análisis pormenorizado del cultivo. Este tipo de manejo implica un ahorro de costes para el agricultor e importantes beneficios medioambientales al reducirse el uso excesivo de agroquímicos. Antes del diseño de los tratamientos localizados es necesaria una completa y exacta caracterización morfológica del cultivo, tarea para la cual los vehículos aéreos no tripulados (conocidos como drones o UAVs) son una de las mejores opciones debido a que pueden tomar información en el momento deseado y con una resolución espacial muy elevada. En el presente trabajo se utilizó un multirrotor volando a 30 m de altura para capturar imágenes con una cámara convencional (RGB: rango visible) de bajo coste sobre dos parcelas comerciales de viña. Las imágenes fueron procesadas para obtener el modelado 3D del cultivo, tras lo que se diseñó un algoritmo de análisis de imagen completamente automatizado para la clasificación de la viña, su caracterización 3D y la detección de huecos en las hileras de cultivo. La validación de los resultados demostró una precisión cercana al 90 % en la clasificación de la viña y al 100 % en la detección de huecos. Además, la estimación de la altura de la viña tuvo un error medio cuadrático de 0,14 m., Esta investigación fue financiada por el proyecto AGL2014-52465-C4-4-R (Ministerio de Economía y Competitividad, fondos FEDER: Fondo Europeo de Desarrollo Regional). La investigación de Jorge Torres-Sánchez y el Dr. José M. Peña fue financiada por los programas FPI (BES-2012-052424) y Ramón y Cajal (MINECO), respectivamente., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Detección automática de vegetación en estado de plántulas en imágenes procedentes de un vehículo aéreo no tripulado (UAV): aplicación para la discriminación de malas hierbas, Automatic detection of vegetation in early season for weed detection in UAV images

  • Torres-Sánchez, Jorge
  • Peña Barragán, José Manuel
  • Serrano Pérez, Angélica
  • López Granados, Francisca
Trabajo presentado en el XV Congreso de la Sociedad Española de Malherbologia (SEMh), celebrado en Sevilla del 19 al 22 de octubre de 2015., [ES] Investigaciones recientes han demostrado la capacidad de las imágenes procedentes de vehículos aéreos no tripulados (UAV) para la cartografía de malas hierbas en fase de plántula, entre otros usos. El primer paso para su detección es la discriminación de suelo desnudo y vegetación (malas hierbas + cultivo). Para ello, es necesario definir un método que calcule automáticamente el umbral óptimo del índice de vegetación que facilita su detección. Uno de los métodos de cálculo de umbrales más extendido es el método de Otsu. Se presenta la adaptación de este método a un entorno de análisis de imagen orientado a objetos para su utilización en imágenes UAV de girasol, maíz y trigo tomadas con dos sensores de distinto rango espectral a bordo de un UAV. Se obtuvieron valores de R2 en torno a 0,7 para la relación entre la vegetación observada y la detectada automáticamente., [EN] Recent research has demonstrated the ability of Unmanned Aerial Vehicle (UAV) images for weed mapping in early season. First step is the discrimination between bare soil and vegetation (weeds + crop) throughout the definition of a method for optimal thresholding of the vegetation indices that allows vegetation detection. One of the best known thresholding procedures is the Otsu’s method. The adaptation of this method to an Object-based image analysis framework is presented for its application for vegetation detection in UAV images acquired over sun flower, maize and wheat crop. R2 values about 0.7 were achieved for the regression between observed and automatically detected vegetation., Este trabajo fue financiado por el proyecto AGL2014-52465-C4-4-R MINECO-FEDER. La investigación de Jorge Torres Sánchez y José Manuel Peña Barragán fue financiada por los programas FPI y Ramón y Cajal, respectivamente., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Cartografía de Cynodon dactylon en viñedo mediante imágenes UAV y tecnología OBIA para un uso sostenible y localizado de herbicidas, Mapping Cynodon dactylon in vineyard by using UAV-images and OBIA technology for site-specific weed management

  • Castro, Ana Isabel de
  • Peña Barragán, José Manuel
  • Torres-Sánchez, Jorge
  • Jiménez-Brenes, Francisco Manuel
  • Recasens, Jordi
  • Valencia, Francisco
  • López Granados, Francisca
Trabajo presentado en el XVI Congreso de la Sociedad Española de Malherbología, celebrado en Pamplona-Iruña, entre los días 25 y 27 de octubre de 2017., [ES] El manejo adecuado de las cubiertas vegetales en viñedos de regadío protege el suelo de la erosión y permite equilibrar el vigor y rendimiento de la viña, lo que redunda en una mejora de la calidad de la cosecha. Estas ventajas quedan mermadas con las infestaciones de grama (Cynodon dactylon) en las cubiertas, una especie perenne, altamente competitiva y difícilmente controlable. El objetivo de este trabajo consistió en la detección temprana y mapeo de C. dactylon en viñedos con cubierta vegetal mediante el uso de imágenes UAV (vehículos aéreos no tripulados) y técnicas de análisis de imágenes basadas en objetos (OBIA). El algoritmo desarrollado permitió la clasificación de los 4 usos principales presentes en el viñedo (viña, suelo desnudo, grama y cubierta vegetal) y la generación de mapas de grama para su control localizado, disminuyendo de esta manera el coste económico y medioambiental del tratamiento., [EN] The use of cover crops is a usual management practice for irrigated vineyards that allows controlling vineyard vigor and yield, also improving the crop quality. However, those advantages have been reduced by bermudagrass (C. dactylon) populations infesting cover crop areas. Bermudagrass is a perennial, very competitive grass and tolerant of reap, pretty difficult to control. The objective of this research was the early mapping of C. dactylon patches in order to provide an optimized site-specific weed management. Object-based image analysis (OBIA) techniques applied to unmanned aerial vehicle (UAV) imagery solved the limitation of spectral similarity between bermudagrass and cover crops or bare soil. The classified maps showed the four main classes in the vineyard (vine, cover crop, C. dactylon and bare soil) with 85% overall accuracy, that allow developing new strategies for site-specific control of C. dactylon infestations and decreasing economical and environmental costs., Esta investigación fue financiada por el proyecto AGL2014-52465-C4-4-R (Ministerio de Economía y Competitividad, fondos FEDER: Fondo Europeo de Desarrollo Regional). La investigación del Dr. Jorge Torres-Sánchez, Dr. Ana de Castro y el Dr. José M. Peña fue financiada por los programas FPI (BES-2012-052424), Juan de la Cierva (MINECO) y Ramón y Cajal (MINECO), respectivamente., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Detección temprana de malas hierbas dentro y fuera de la línea de cultivo mediante imágenes- UAV y modelos 3D, Early weed detection between and within the crop row using UAV images and 3D models

  • Torres-Sánchez, Jorge
  • López Granados, Francisca
  • Castro, Ana Isabel de
  • Jiménez-Brenes, Francisco Manuel
  • Peña Barragán, José Manuel
Trabajo presentado en el XVI Congreso de la Sociedad Española de Malherbología, celebrado en Pamplona-Iruña, entre los días 25 y 27 de octubre de 2017., [ES] Se ha desarrollado una metodología automática para la detección temprana de malas hierbas dentro y fuera de la línea de cultivo en fase temprana usando como variable discriminante la altura de las plantas (cultivo y malas hierbas), calculada mediante técnicas fotogramétricas. Se utilizó un UAV equipado con una cámara modificada para captar información en las bandas del Rojo, Verde e Infrarrojo Cercano. Se tomaron imágenes sobre una parcela de girasol infestada por diferentes especies de malas hierbas en fase temprana. Las imágenes fueron procesadas para generar una ortoimagen y un modelo tridimensional del cultivo y malas hierbas para su posterior análisis usando métodos orientados a objetos y el clasificador Random Forest. Se comparó la infestación de malas hierbas detectada con la realmente existente en el campo en una serie de marcos de referencia, obteniéndose un coeficiente de determinación de 0,91 entre ambas variables., [EN] An automatic methodology for early season weed detection between and within the crop rows has been developed, where the main innovation was the use of plant height as discriminant feature. An UAV equipped with a conventional camera modified for R (red), G (green) and NIR (near infrared) acquisition was used for taken images over a sunflower plot infested with different weed species in early season. The images were processed to generate an orthomosaic and a digital surface model (DSM) representing both the crop and weeds, and they were analyzed using object based image analysis (OBIA) and Random Forest classifier. Automatically detected weed cover was compared with the real weed cover in the field in a number of reference frames, and the determination coefficient between both variables was 0.91., Este trabajo fue financiado por el proyecto AGL2014-52465-C4-4-R MINECO-FEDER. La investigación de Jorge Torres Sánchez, Ana Isabel de Castro Megías y José Manuel Peña Barragán fue financiada por los programas FPI, Juan de la Cierva, y Ramón y Cajal, respectivamente. La estancia de Jorge Torres Sánchez en la Universidad de Salzburgo fue financiada por el programa FPI., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Optimización de la cartografía de malas hierbas mediante técnicas geoestadísticas y teledetección con UAV, Optimization of weed mapping using geostatistical techniques and remote sensing with UAV

  • Jurado-Expósito, Montserrat
  • Castro, Ana Isabel de
  • Torres-Sánchez, Jorge
  • Jiménez-Brenes, Francisco Manuel
  • López Granados, Francisca
Trabajo presentado en el XVI Congreso de la Sociedad Española de Malherbología, celebrado en Pamplona-Iruña, entre los días 25 y 27 de octubre de 2017., [ES] Se evalúa una metodología para la cartografía de malas hierbas en época tardía del cultivo combinando datos espaciales georreferenciados (variable primaria) con información espectral (variables secundarias). Como variable 1ia se ha estudiado Papaver rhoeas L. en trigo y como variables 2ias: las bandas Rojo, Verde, Azul y NIR (Near-InfraRed) de imágenes UAV (Unmanned Aerial Vehicles) tomadas en campo el día del muestreo. Se comparan dos tipos de estimadores: krigeado ordinario (análisis de la variable 1iª) y cokrigeado (análisis incorporando variables 2ias). La comparación de la precisión de los mapas de infestación obtenidos se ha realizado en base a la incertidumbre de las estimas. Los resultados muestran que la incorporación de variables secundarias espectrales al proceso de interpolación geoestadística mejora la estimación de la variable 1ia, especialmente cuando se incluye en el análisis la banda Verde., [EN] A methodology for late weed mapping combining georeferenced spatial data (1st variable) with spectral information (2nd variables) is evaluated. The Papaver rhoeas L. spatial data in wheat was used as1st variable and Red, Green, Blue and NIR bands from UAV images as 2nd variables. Two types of algorithms were compared: Ordinary Kriging (analysis of 1st variable) and CoKriging (to incorporate the 2nd variables). Comparison of infestations maps accuracy was based on cross validation statistics. Results showed that including spectral secondary variables into geostatistical analysis improves the accuracy of 1st variable estimations, especially when band G is included as 2nd variable., Estudio financiado por el proyecto AGL2014-52465-C4-4-R MINECO-FEDER. Agradecemos al Dr. Recasens y su grupo su valiosa ayuda en las prospecciones de campo. La investigadora Dr. Ana Isabel de Castro fue financiada por el programas Juan de la Cierva (MINECO)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Principales variables para la detección de plántulas de amapola (Papaver rhoeas) en imágenes tomadas con un vehículo aéreo no tripulado, Main features for the detection of Papaver rhoeas seedlings in images collected with an unmanned aerial vehicle

  • Peña Barragán, José Manuel
  • Castro, Ana Isabel de
  • Torres-Sánchez, Jorge
  • Jiménez-Brenes, Francisco Manuel
  • Valencia, Francisco
  • López Granados, Francisca
Trabajo presentado en el XVI Congreso de la Sociedad Española de Malherbología, celebrado en la Universidad Pública de Navarra, Pamplona-Iruña, entre los días 25 y 27 de octubre de 2017., [ES] En este trabajo se han evaluado variables espectrales, morfológicas (forma, tamaño), contextuales (posición) y texturales que permitan desarrollar un procedimiento automático de clasificación de plántulas de amapola, otras malas hierbas, cultivo y suelo desnudo en imágenes adquiridas con un vehículo aéreo no tripulado (UAV). Las imágenes se tomaron con una cámara modificada para la obtención de información en infrarrojo-color y a una resolución espacial de 0,60 cm/píxel. Se aplicaron técnicas avanzadas de análisis de imágenes basadas en objetos para la obtención de las variables descritas y se desarrolló un modelo tipo árbol de decisión para cuantificar la importancia de cada variable en la clasificación. Los resultados indicaron que la información espectral basada en el índice de vegetación de diferencias normalizadas (NDVI, por sus siglas en inglés) aportó un 46% al modelo de clasificación, principalmente para la discriminación de objetos de vegetación y suelo desnudo. Por otra parte, para la identificación de las plántulas de amapola fue necesario incorporar además variables morfológicas (principalmente, el área [tamaño] del objeto, que aportó un 36% al modelo) y texturales (p.ej., textura media y entropía, con un 11% de contribución en el modelo). Por su parte, la distancia relativa de los objetos a la línea de cultivo tuvo escasa importancia en la clasificación total., [EN] A group of spectral, morphological (shape-based, size), contextual (location), and textural features were evaluated with the aim of automatic classification of Papaver rhoeas seedlings, other weeds, crop plants and bare soil in images collected with an unmanned aerial vehicle (UAV). The images were taken with a color-infrared modified camera at 0,60 cm/pixel of spatial resolution. The features were obtained by applying advanced object-based images techniques, and their contribution to the classification was analyzed with decision tree modeling. Spectral information from the normalized difference vegetation index (NDVI) contributed 46% to the model, mainly due to its capacity to discriminate vegetation and bare soil objects. Additionally, identification of Papaver rhoeas seedlings was possible by incorporating morphological (mainly object size, which contributed to 36% to the model) and textural features (e.g., mean and entropy, which contributed to 11% to the model). Finally, relative distance of the objects to the crop-rows had a low importance in the total classification results., Investigación financiada por el proyecto MINECO AGL2014-52465-C4-4R. La investigación de Dr. José M. Peña, Dr. Ana de Castro y Dr. Jorge Torres-Sánchez fue financiada por los programas Ramón y Cajal (MINECO), Juan de la Cierva (MINECO) y FPI (BES-2012-052424), respectivamente, No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Cuantificación de la influencia de la poda sobre la arquitectura 3D del olivo mediante tecnología UAV

  • Jiménez-Brenes, Francisco Manuel
  • López Granados, Francisca
  • Torres-Sánchez, Jorge
  • Castro, Ana Isabel de
  • Serrano, Nicolás
  • Peña Barragán, José Manuel
Comunicaciones Científicas Simposium Expoliva 2017. Jaén (España), 10-12 mayo., El tipo y la intensidad de la poda del olivo modifican la copa del árbol con diferente grado de severidad lo que afecta al crecimiento y a la calidad de su fruto. En esta investigación se ha desarrollado un conjunto tecnológico que consiste en la combinación de la adquisición de imágenes procedentes de un vehículo aéreo no tripulado (UAV) y el correspondiente análisis de dichas imágenes basado en objetos (OBIA). El objetivo de este trabajo ha sido la monitorización 3D de cada uno de los árboles de una parcela de olivar en la que se llevaron a cabo tres tratamientos distintos de poda (tradicional, adaptada y mecanizada). Se realizaron tres vuelos UAV sobre la parcela en tres momentos diferentes (antes de la poda, un mes después de la poda y un año después de la poda) y se analizaron 3 variables geométricas: altura, área proyectada y volumen de copa de cada árbol. Los resultados obtenidos muestran que existen diferencias significativas entre las variables geométricas analizadas dependiendo de la poda, siendo los olivos bajo poda tradicional los que registraron mayores crecimientos de altura, área proyectada y volumen. Debido a que actualmente no existen referencias científicas que cuantifiquen los efectos de la poda con tecnología UAV y algoritmos de clasificación OBIA, este trabajo tiene potencialidad para aplicaciones en otros cultivos leñosos., Esta investigación fue financiada por el proyecto AGL2014-52465-C4-4-R (Ministerio de Economía y Competitividad, fondos FEDER: Fondo Europeo de Desarrollo Regional). La investigación del Dr. Jorge Torres-Sánchez, Dr. Ana de Castro y el Dr. José M. Peña fue financiada por los programas FPI (BES-2012-052424), Juan de la Cierva (MINECO) y Ramón y Cajal (MINECO), respectivamente., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Mapping Cynodon dactylon in vineyards using UAV images for site-specific weed control

  • Castro, Ana Isabel de
  • Peña Barragán, José Manuel
  • Torres-Sánchez, Jorge
  • Jiménez-Brenes, Francisco Manuel
  • López Granados, Francisca
Paper presented at the 11th European Conference on Precision Agriculture (ECPA 2017), John McIntyre Centre, Edinburgh, UK, July 16–20 2017)., In Spain, the use of annual cover crops is a crop management practice for irrigated vineyards that allows controlling vineyard vigor and yield, which also leads to improve the crop quality. Recently, Cynodon dactylon (bermudagrass) has been reported to infest those cover crops and colonize the grapevine rows, resulting in significant yield and economic losses due to the competition for water and nutrients. From timely unmanned aerial vehicle (UAV) imagery, the objective of this research was to map C. dactylon patches in order to provide an optimized site-specific weed management. A quadrocopter UAV equipped with a point-and-shoot camera was used to collect a set of aerial red-green-blue (RGB) images over a commercial vineyard plot, coinciding with the dormant period of C. dactylon (February 2016). Object-based image analysis (OBIA) techniques were used to develop an innovative algorithm for early discrimination and mapping of C. dactylon, which had the ability to solve the limitation of spectral similarity of this weed with cover crops or bare soil. As a general result, the classified maps of the studied vineyard showed four main classes, i.e. vine, cover crop, C. dactylon and bare soil, with 85% overall accuracy. These weed maps allow developing new strategies for site-specific control of C. dactylon populations in the context of precision viticulture., This research was partly financed by the AGL2014-52465-C4-4R project (Spanish Ministry of Economy and Competition, FEDER Funds). Research of Dr. de Castro, Dr. Peña and Dr. Torres-Sánchez were financed by the Juan de la Cierva, Ramón y Cajal and FPI (MINECO), Programs, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Application of synchrotron infrared micro-reflectance for the study of diverse materials

  • González-Castillo, Eduin I.
  • Shuttleworth, Peter S.
  • Quiles-Díaz, Susana
  • Enrique-Jiménez, Patricia
  • Flores, Araceli
  • Ania, F.
  • Salavagione, Horacio J.
  • Gómez-Fatou, Marián A.
  • Yousef, Ibraheem
  • Kreuzer, Martin
  • Ellis, Gary James
Madrid from October 9-11, 2017. -- https://w3.ual.es/Congresos/AUSE/CONGRESO2017/index_congreso.html, EIGC acknowledges a PhD grant from the CONACYT (Mexico). SQD and PEJ acknowledge FPI Fellowships, and PSS a Ramón y Cajal PostDoc Fellowship, from the MINECO (Spain). MINECO also provided financial support through Grants MAT2014-54231-C4-4P, MAT2014-59674-JIN, MAT2013-47898-C2-1R and MAT2013-47898-C2-2R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

On-surface azo-coupling reaction of p-aminophenol on Cu(110)

  • Ruiz del Árbol, Nerea
  • Palacio, Irene
  • Otero, Gonzalo
  • Martínez, José I.
  • Andrés, Pedro L. de
  • Stetsovych, Oleksander
  • Moro-Lagares, María
  • Mutombo, Pingo
  • Švec, Martin
  • Jelinek, Pavel
  • Floreano, Luca
  • Salavagione, Horacio J.
  • Ellis, Gary James
  • López, María Francisca
  • Martín-Gago, José A.
Trabajo presentado en la conferencia Fuerzas y Túnel (FyT2016), celebrada en Girona del 5 al 7 de septiembre de 2016., One of the potential challenges in materials science is the synthesis of novel materials with new and desired properties. On-surface c hemistry is a recent and promising field that provides the basic tools to manage this goal [1], and this approach allows the synthesis of new materials sometimes not accessible with conventional techniques [2]. In this work w e have studied the thermal ly activated chemical reaction of p-aminophenol (p- AP) induced by the Cu(110) surface in UHV environment. A multi-technique study using STM/nc-AFM, LEED, XPS and NEXAFS, as well as DFT calculations was employed to unveil the structural and chemical characteristics of the process and its outcome. This work reveals that by simple thermal activation two p-AP molecules undergo an azo-coupling reaction to form 4,4'-azobis(phenol) (ABP). These molecules arrange in a flat geometry on the Cu surface forming highly organized molecular rows that are aligned out of the main crystallographic Cu(110) surface directions (Fig 1). XPS N1s spectra reveal an oxidation reaction from amine to imine while XPS O1s data suggests that oxygen atoms could be covalently bound to the substrate. In summary, we have obtained a novel aromatic azo-compound by an on-surface thermally activated process, which evidences the enormous potential of this advanced strategy. The multi-technique study allows us to propose a model for this reaction., We thank Spanish MINECO (Grants MAT2014-54231-C4-1-P and MAT2014-54231-C4-4-P)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Deficit irrigation in olive table during drought sensitive phenological stage

  • Martín Palomo, Mª José
  • Corell González, M.
  • Girón Moreno, Ignacio F.
  • Andreu Cáceres, L.
  • Torrecillas Melendreras, Arturo
  • Centeno, Ana
  • Pérez-López, D.
  • Moriana, Alfonso
5 páginas.-- 3 figuras.-- 1 tabla.-- 6 referencias.-- Poster presentado en el XIV Simposio Internacional Hispano-Portugués de Relaciones Hídricas en Plantas de la Sociedad Española y Portuguesa de Fisiología Vegetal.“La fisiología como valor añadido para la comercialización”, Regulated deficit irrigation in olive orchard is performed during pit hardening, midsummer. In table olive, the recovery should start at the end of August in order to obtain commercial fruit size. The aim of this work was to control deficit irrigation during few weeks before harvest. The experiment was performed in the experimental farm of La Hampa (Coria del Río, Seville, Spain). Irrigation was stopped 4 (RDI-2) and 2 (RDI-1) weeks before harvest until a water stress level of -2 MPa of midday stem water potential. The comparison with a full irrigated control showed that this level was reached only in high fruit load seasons and did not reduce gas exchange. The effect in yield was not significant in any of the three seasons. Fruit size was slightly reduced only in high fruit load seasons., This research was supported by Agencia Española de Investigación (AEI) of the Ministerio de Economía, Industria y Competitividad (MINECO) and Fondo Europeo de Desarrollo (FEDER), projects AGL2013-45922-C2-1-R and AGL2016-75794-C4-4-R, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Limitations of trunk diameter fluctuations in the deficit irrigation scheduling of almond orchards

  • Martín Palomo, Mª José
  • Corell González, M.
  • Girón Moreno, Ignacio F.
  • Andreu Cáceres, L.
  • Trigo, E.
  • Torrecillas Melendreras, Arturo
  • Centeno, Ana
  • Pérez-López, D.
  • Moriana, Alfonso
5 páginas.-- 4 figuras.-- 1 tabla.-- 4 referencias.-- Poster presentado en el XIV Simposio Internacional Hispano-Portugués de Relaciones Hídricas en Plantas de la Sociedad Española y Portuguesa de Fisiología Vegetal.“La fisiología como valor añadido para la comercialización”, Water stress level in the regulated deficit irrigation scheduling is less known. Water status indicators would provide an accurate tool to optimize small amount of available water. The aim of this work was studied the use of midday stem water potential and trunk diamater fluctuations in the deficit irrigation of almond trees. Baseline suggested for full irrigation in Prunus was near to the water potential of full irrigated trees. Signal of maximum daily shrinkage was almost insensitive to water stress, while trunk growth rate showed a good relationship. Such results confirm the limitations of using maximum daily shrinkage during the period of growth in almond., This research was supported by Agencia Española de Investigación (AEI) of the Ministerio de Economía, Industria y Competitividad (MINECO) and Fondo Europeo de Desarrollo (FEDER), project (AGL2016-75794-C4-4-R). Authors thank to Finca La Florida for their helpful assistant during the experiment, specially to Mr Carlos Angulo., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Regulated deficit irrigation scheduling in table olive based on measurements of water potential during pit hardening

  • Corell González, M.
  • Martín Palomo, Mª José
  • Girón Moreno, Ignacio F.
  • Andreu Cáceres, L.
  • Torrecillas Melendreras, Arturo
  • Centeno, Ana
  • Pérez-López, D.
  • Moriana, Alfonso
5 páginas.-- 3 figuras.-- 2 tabla.-- 8 referencias.-- Comunicación presentadoa en el XIV Simposio Internacional Hispano-Portugués de Relaciones Hídricas en Plantas de la Sociedad Española y Portuguesa de Fisiología Vegetal.“La fisiología como valor añadido para la comercialización”, Several regulated deficit irrigation (RDI) strategies based on water status measurements in table olive (Olea europea L. cv Manzanilla de Sevilla) was analyzed during 3 years field experiment in Dos Hermanas (Sevilla, Spain). Scheduling based on midday stem water potential (SWP) with a water deficit period during pit hardening was performed in 4 irrigation treatments: Control treatment, consisted in optimal plant water status: -1.4 MPa from beginning pit hardening until harvest; RDI-1: -2 MPa until harvest; RDI-2: -3.5 MPa and early recovery at the beginning of August; RDI-3: -3.5 MPa until harvest. The results showed different levels of water stress and several durations at pit hardening. Fruit yield and quality was studied and not significances differences were found. The influence of tree load and water stress intensity in fruit size was studied, This research was supported by Agencia Española de Investigación (AEI) of the Ministerio de Economía, Industria y Competitividad (MINECO) and Fondo Europeo de Desarrollo (FEDER), projects AGL2013-45922-C2-1-R and AGL2016-75794-C4-4-R., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

CNA facility for testing electronics, National Accelerators Centre a facility for testing electronics

  • Morilla, Yolanda
Trabajo presentado en RADFAC 2017, celebrado en Sevilla (España) el 30 de marzo de 2017, Projects ESP2015-68245-C4-40P & IPT-2011-1603-370000, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Transferencia de Tecnología en el CNA: RadLab, Ensayos de Irradiación

  • Martín Holgado, Pedro
  • Morilla, Yolanda
Trabajo presentado en las IX Jornadas CPAN (Centro Nacional de Física de Partículas, Astropartículas y Nuclear), celebradas en Santander (España), del 23 al 25 de octubre de 2017, Projects ESP2015-68245-C4-4-P & IPT-2011-1603-370000, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Farmer chamber response to different filter box and surrounding configurations

  • Martín Holgado, Pedro
  • Morilla, Yolanda
  • Domínguez, Manuel
  • Fernandez, G.
Trabajo presentado a la 17th European Conference on Radiation and its Effects on Components and Systems, celebrada en Ginebra (Suiza) del 2 al 6 de octubre de 2017, The use of a filter box for TID test is a recommendation present in the most relevant test method standards. However, the absence of specific details can produce discrepancies between different radiation facilities and dosimetry procedures., This work is partially supported by CECI Project with reference ESP-2015-68245-C4-4-P (Spanish MINECO), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Non-intrusive automatic compiler-guided reliability improvement of embedded applications under proton irradiation

  • Serrano-Cases, A.
  • Morilla, Yolanda
  • Martín Holgado, Pedro
  • Cuenca-Asensi, Sergio
  • Martínez-Álvarez, A.
Trabajo presentado en la European Conference on Radiation and its Effects on Components and Systems, celebrada en Gotemburgo (Suecia) del 16 al 21 de septiembre de 2018, COTS processors are not designed to cope with the harmful effects of radiation and, because of their nature, traditional hardware redundant techniques can not be applied to their structural components. A potential software method for modifying the reliability without instrumenting the code is operating the way programs are built (compiled). Modern compilers, such as GNU-GCC offer a set of optimizations which are intended to reduce the code size or the execution. However, they do not offer any predefined optimization associated with reliability improvements. The goal of this research is twofold: Demonstrate that the fault tolerance of embedded software can be improved just by selecting the appropriated compilation parameters and optimizations. And propose an automatic exploration strategy for tunning the compilation process focused on softerror mitigation, This work was funded by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund Refs:ESP2015-68245-C4-3-P and C4-4-P., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Progress of CNA to become the Spanish facility for combined irradiation testing in aerospace

  • Morilla, Yolanda
  • Martín Holgado, Pedro
  • Romero-Maestre, Amor
  • Labrador, J. A.
  • Fernández-Martínez, Begoña
  • Praena, Javier
  • Lindoso, Almudena
  • García-Valderas, Mario
  • Peña-Fernandez, M.
  • Entrena, Luis A.
Trabajo presentado en la European Conference on Radiation and its Effects on Components and Systems, celebrada en Gotemburgo (Suecia) del 16 al 21 de septiembre de 2018, The collaborative work in between different public institutions and private companies, through different global projects (RENASER, RENASER+, RENASER3 and RADLAB), has made possible to consolidate the irradiation area in the CNA (Centro Nacional de Aceleradores), with especial emphasis on the testing of devices suitable to be used in aerospace projects. Eight years ago, one of the conclusions in our first project was that using our cyclotron facility it could be possible detecting single events on scales below 250nm. Along the second project, it was already observed this kind of effects on 130nm devices. Nowadays, the CNA facilities are used to perform irradiation testing in sequential steps with gamma photons and particles, on materials, optoelectronic and microelectronic devices. In the next future, it will be also available to perform thermal cycling tests in combination with radiation, all that simultaneously, and in the same facility of our Centre, This work has been supported in part by the projects ESP-2015-68245-C4-4-P and ESP-2015-68245-C4-1-P (Spanish MINECO),, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Recent studies at the three irradiation facilities from CNA and the coming upgrade

  • Martín Holgado, Pedro
  • Morilla, Yolanda
Trabajo presentado en SERESSA 2018, 14th international School on the Effects of Radiation on Embedded Systems for Space Applications, celebrado en Noordwijk (Holanda) del 12 al 16 de noviembre de 2018, The development of some specific Spanish national research projects has contributed to improving the CNA capabilities to perform irradiation testing for aerospace applications As a public center of research, the CNA testing and irradiation services are open to another research groups or institutions and private companies Currently, three of the CNA laboratories are used by our group to carry out different irradiation tests which are based on two low LET accelerators and one gamma irradiation system The gamma facility accomplishes the international standards requirements for total ionizing dose test performance On the other hand, in the case of particles, only ions with low lineal energy transfer (LET 30 MeV·cm 2 / are available in the CNA to perform this kind of tests However, the use of low energy protons, with quasi mono energetic beam, is explicitly recommended by the ESCC Basic Specification No 25100 to perform the tests on modern components 90 nm technology node or below) Although it is not possible to cover a full range of applications, the chanc e to assume a few different kinds of tests in the same facility lead us to invest more effort in the development and the improvement of this unique Spanish Centre for combined irradiation testing, This work is partially supported by CECI Project with reference ESP2015 68245 C4 4 P (Spanish MINECO)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Effect of curing temperature in the hydration of a belite cement with high level of fly ash

  • Qu, Bo
  • Sánchez-Herrero, M. J.
  • Martín, Antonia
  • Pastor, José Y.
  • Palomo, Ángel
  • Fernández-Jiménez, Ana
Trabajo presentado al 15th International Congress on the Chemistry of Cement (ICCC), celebrado en Praga (República Checa) del 16 al 20 de septiembre de 2019., This study aimed to determine the physical, mechanical, mineral and microstructural properties of a industrially manufactured hybrid cement (HYP), consisting 47,5 % Belite clinker + 47,5 % FA + 5 % solid alkaline activator. The effect of the curing temperature (25ºC, or 85 ºC) on hydration kinetics and on compressive strength development (in paste prisms and mortar prisms) was determined. Isothermal conduction calorimetry shows that curing at 85ºC, accelerates relevantly the hydration process. The 3 days compressive strength achieved by curing at 25oC was 9 MPa, but 30 MPa was the mechanical strength after 3 days if mortars were cured at 85ºC. After 28 days, the compressive strength of the specimen cured at 25oC was 33 MPa, and 43 MPa after 90 days. The specimens cured at 85oC exhibited a slightly better compressive strength. The hydration products formed were characterized using XRD, SEM/EDX and 27Al and 29Si MAS-NMR. The main reaction product formed was found to be a mixture of cementitious gels: C-(A)-S-H /C-A-S-H/(N,C )-A-S-H. The initial curing at 85°C for 20 h inhibited the formation of ettringite (or favored its rapid decomposition), at least during the first 90 days (maximum age of the materials analyzed in this work). On the contrary, curing at 85ºC favors the precipitation of the sulphates in the form of Phase U., This research was funded by the Spanish Ministry of the Economy, Industry and Competitiveness and FEDER under research projects BIA2016-76466-R and RTC2016-4872-S, Ministry of Economy and Competitiveness of Spain (MAT2015-70780-C4-4-P), and Community of Madrid (S2013/MIT-2862-MULTIMATCHALLENGE). Author QuBo, a Ph.D. the student worked under a China Scholarship Council (CSC) grant.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

El teatro y el anfiteatro tras su abandono en época tardoantigua

  • Morán Sánchez, Carlos Jesús
Trabajo presentado al Seminario-Reunión del proyecto de investigación HAR2015-64386-C4-4-P: El Legado Monumental de Augusta Emerita: la reutilización arquitectónica en la transformación del paisaje urbano, celebrado en Mérida del 26 al 27 de junio de 2018., HAR2015-64386-C4-4-P, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

La alcazaba. La reutilización de materiales romanos y de época visigoda

  • Franco Moreno, Bruno
  • Márquez Pérez, Juana
  • Mateos Cruz, Pedro
Trabajo presentado al Seminario-Reunión del proyecto de investigación HAR2015-64386-C4-4-P: El Legado Monumental de Augusta Emerita: la reutilización arquitectónica en la transformación del paisaje urbano, celebrado en Mérida del 26 al 27 de junio de 2018., HAR2015-64386-C4-4-P, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

La reutilización arquitectónica en la iglesia románica de Sta. Eulalia

  • Mateos Cruz, Pedro
Trabajo presentado al Seminario-Reunión del proyecto de investigación HAR2015-64386-C4-4-P: El Legado Monumental de Augusta Emerita: la reutilización arquitectónica en la transformación del paisaje urbano, celebrado en Mérida del 26 al 27 de junio de 2018., HAR2015-64386-C4-4-P, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Reconstrucción fotogramétrica de parcelas de almendro con diferentes marcos de plantación: optimización de planes de vuelos-UAV

  • Torres-Sánchez, Jorge
  • Jiménez-Brenes, Francisco Manuel
  • Mesas-Carrascosa, Francisco Javier
  • Arquero, Octavio
  • Lovera, María
  • López Granados, Francisca
Trabajo presentado en el Congreso en red de Olivicultura, Citricultura y Fruticultura de la Sociedad Española de Ciencias Hortícolas (CITRUSTECH), celebrado del 23 al 25 de marzo de 2021., En los últimos años, la reconstrucción tridimensional (3D) de cultivos leñosos mediante imágenes procedentes de vehículos aéreos no tripulados (UAV, por sus siglas en inglés) se ha utilizado para una caracterización eficiente de la arquitectura de la copa de cada árbol. Esta tecnología ha sido aplicada con éxito en ensayos de fenotipado de almendro y ha demostrado su potencial para plantaciones comerciales. Uno de los pasos más importantes para generar una correcta modelización 3D del cultivo es el diseño del plan de vuelo del UAV en el que, además de su altura y el solape entre imágenes, hay que definir la orientación de las pasadas de vuelo y si se combinan pasadas en diferentes direcciones. Aunque existen trabajos sobre varios aspectos del diseño de planes de vuelo-UAV, no se ha realizado ningún estudio para comprobar si el marco de plantación es otro factor a tener en cuenta, ya que las diferentes posiciones relativas de los árboles pueden provocar oclusiones en las imágenes que afectarían a la calidad de la reconstrucción 3D. Por lo anteriormente expuesto, se diseñó un plan de vuelo en cuadrícula sobre parcelas de almendro con diferentes marcos de plantación: 7×6, 6×3, 5×2, y 3,5×1,2 (medidas en metros). Las imágenes tomadas fueron procesadas para generar nubes de puntos fotogramétricas aplicando tres enfoques diferentes y utilizando: 1) sólo las imágenes tomadas en pasadas paralelas a las líneas de árboles; 2) sólo las imágenes tomadas en pasadas transversales a las líneas de árboles; 3) combinando todas las imágenes. De entre las diferentes opciones, la 3 arrojó las mayores densidades de puntos, seguida por la 1, y siendo la 2 la que originó reconstrucciones 3D de menor calidad. La diferencia en densidad de puntos entre las opciones 1 y 2 fue menor en el caso de la plantación en seto (12% menos de puntos) que en el de los marcos de plantación más amplios (20% menos de media). También se observó que la reducción en la densidad no afectó prácticamente a la reconstrucción 3D del terreno mientras que sí afectó a las copas de los almendros, lo que influyó en el posterior análisis y caracterización del cultivo. Como conclusión, se recomienda diseñar planes de vuelo que combinen pasadas paralelas y transversales a las hileras de árboles. Debido a que esto implica un mayor consumo de batería del UAV, en casos en los que haya que volar superficies extensas es preferible volar trazando pasadas paralelas a las hileras de los árboles., Los trabajos presentados han sido financiados por los proyectos AGL2017-83325-C4-4-R y Transforma (ref.: PP.TRA.TRA.2019.00.2).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Optimizing peach management based on hyperspectral and unmanned aerial vehicle (UAV) technology

  • Castro, Ana Isabel de
  • Maja, Joe Mari
  • Melgar, Juan Carlos
  • Schnabel, G.
  • López Granados, Francisca
  • Peña, José María
Papers presented at the 13th European Conference on Precision Agriculture (Budapest, Hungary 18-22 July 2021).-- Edited by: John V. Stafford., The purpose of this research was to examine and monitor factors affecting peach cultivation as a part of an overall research program for developing Integrated Pest Management strategies. Potassium fertilization and the practice of root-collar excavation have proven effective in increasing yield and fruit quality and in extending orchard longevity on infested replant sites, respectively. Remote sensing has been proven to be an effective technology for monitoring crop conditions at field scale. Thus, hyperspectral imagery collected from a UAV was used to assess the effect on the peach spectral signature of two foliar potassium spray rates and two soil management treatments as well as the damage produced by peach rust. Significant differences in peach canopy hyperspectral profiles were observed in all analysis performed, i.e. according to the K-treatments; to the soil managements; and to the severity classes. In addition, the image wavebands that efficiently discriminated the evaluated factors were identified.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Effect of Resistive Switching Cycling on the Physical Characteristics of Ni/HfO2/n+-Si RRAM Devices

  • Muñoz-Gorriz, J.
  • Acero Leal, María Cruz
  • González, M. B.
  • Campabadal, Francesca
  • Miranda, E.
Trabajo presentado en la 1st International Conference on Microelectronic Devices and Technologies, celebrado en Barcelona (España), del 20 al 22 de junio de 2018, In this work, the unipolar resistive switching characteristics of Ni/HfO2/n+-Si RRAM devices are investigated. Inspection by scanning electron microscope after Ni removal revealed small hillocks and defects in the active area caused by the electrical stress during cycling. In addition, for severely damaged devices the set voltage is found to exceed the forming voltage. This behavior is correlated to the high current levels reached in the low resistance state which originate a remarkable physical degradation of the top metal electrode. These results point out the importance of considering current excess in the reset phase., This work has been partially funded by the Spanish MINECO and FEDER though projects TEC2014- 52152-C3-1-R, TEC2017-84321-C4-4-R, and TEC2014-54906-JIN. The authors acknowledge the reviewer’s suggestions to improve the quality of this paper.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Physical characterization of filamentary structures in TiN/Ti/HfO2/W memristor devices

  • Poblador, Samuel
  • Maestro, Marcos
  • Acero Leal, María Cruz
  • González, M. B.
  • Campabadal, Francesca
Resumen del trabajo presentado en la 12th Spanish Conference on Electron Devices (CDE 2018), celebrada en Salamanca (España), del 14 al 16 de noviembre de 2018, In this work, the physical degradation of Ni/HfO2/n+-Si RRAM devices occurring during negative unipolar resistive switching cycling is analyzed. In most of the cases, a localized defect is generated in the dielectric layer after the forming process. However, due to the electrical stress, in some devices a complete degradation is observed comprising a crater-like structure, being this behavior correlated to a sudden increase of the current in the low resistance state., This work has been partially funded by the Spanish Ministry of Science, Innovation and Universities and the FEDER program through projects TEC2017-84321-C4-1-R, TEC2017- 84321-C4-4-R, and TEC2014-54906-JIN.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

One-way Sensitivity Analysis of the Quasi-static Memdiode Model for RRAM Devices

  • Salvador, E.
  • González, M. B.
  • Campabadal, Francesca
  • Martín-Martínez, J.
  • Rodríguez, R.
  • Miranda, E.
In this work, we assess the impact that changes in the parameters of the quasi-static memdiode model (QMM) for RRAM devices will have on the simulated conduction characteristics. Sensitivity analysis is recognized as the most important technique for identifying which parameters are key drivers of the model's results. The model's reference parameters are extracted first from a typical (median) experimental I-V curve of an electroformed Hf02-based metal-insulator-metal (MIM) structure. Then one parameter is changed at a time (so-called univariate or one-way analysis) in the LTSpice script and the variation of some selected observables recorded. Special attention is paid to the voltage span-induced sensitivity effect., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Balance energético temporal entre la producción de aceite y los tejidos de la aceituna

  • Pérez-López, David
  • Rapoport, Hava F.
  • Casanova, Laura
  • Jiménez-González, Rocío
  • Centeno, Ana
Trabajo presentado en el XVI Congreso Nacional de Ciencias Hortícolas, celebrado en Córdoba del 17 al 22 de octubre de 2021., La producción de aceite ocurre en el mesocarpo del fruto. Tanto el aceite como los tejidos de la aceituna tienen un coste energético para su formación y mantenimiento. Maximizar la producción de aceite depende del equilibrio temporal entre la energía empleada en la producción de tejidos y la empleada en el aceite propiamente. Se estudió el desarrollo de la aceituna en una plantación de olivar (17 años), variedad Arbequina, situada en Ciudad Real durante la campaña 2016. Los olivos estuvieron regados según la ETc asegurando que no existió estrés hídrico. Semanalmente se cogieron muestras de aceitunas en 12 árboles para la determinación del peso fresco y peso seco del fruto completo, así como la resistencia a la rotura del hueso. A partir de 8 semanas después de plena floración (SDPF) también se separó el hueso de la pulpa para determinar su peso seco. Otra submuestra semanal de 25 aceitunas por árbol se deshidrató para determinar el rendimiento graso mediante RMN. Se calcularon los costes energéticos de la formación y del mantenimiento (respiración) del hueso, la pulpa sin aceite, y el aceite mediante la determinación de equivalentes de glucosa, una metodología que permite comparar los costes energéticos en el desarrollo de tejidos y elementos diferentes. Los resultados muestran que las demandas energéticas del endocarpo y mesocarpo fueron similares hasta finalizar el endurecimiento del hueso y éste no representó un incremento significativo en el uso energético. La acumulación de aceite empezó a las 7 semanas mientras todavía el hueso se esclerificaba, pero el coste energético total seguía una línea recta, hasta aproximadamente 14 semanas, cuando se produjo un fuerte incremento en la cantidad de energía, debido a un aumento de la tasa de formación de aceite., Parte de este trabajo ha sido financiado con el proyecto del MEIC AGL2016-75794-C4-4-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Aislamiento de una nueva especie del género Hydrotalea y su relevancia ecológica en aguas subterráneas

  • Gago, Juan F.
  • Viver, Tomeu
  • Robledo Ardila, Pedro Agustín
  • Ferreira, Elaine
  • Rosselló-Mora, Ramón
Resumen del póster presentado al XXVIII Congreso Nacional de Microbiología, celebrado virtualmente del 28 de junio al 2 de julio de 2021., Con el objetivo de obtener nuevos principios activos para su uso en la industria biotecnológica, se generó una colección de ~3000 cultivos puros a partir de distintas muestras ambientales que se identificaron mediante el uso en tándem de las técnicas de MALDI-TOF y secuenciación del gen que codifica para el ARNr 16S. De esta colección se seleccionó un número representativo con el fin de abarcar la mayor diversidad taxonómica y fenotípica, y así poder evaluar con mayor precisión el potencial biotecnológico de los aislados. Entre éstos se destacó una cepa aislada de una muestra de agua subterránea con anomalía térmica (~4ºC superior a la temperatura media de 25ºC) y que fue identificada como un nuevo miembro del género Hydrotalea. El estudio genómico nos permitió caracterizar sus particularidades genéticas y su singularidad filogenética, confirmando que se trataba de una nueva especie del género. Además, para profundizar en su relevancia ecológica, realizamos el estudio metagenómico de diferentes aguas subterráneas, incluida la muestra de origen, demostrando que esta nueva especie forma parte de la comunidad microbiana de estos ambientes y en proporciones suficientemente altas como para ser detectada molecularmente. Por tanto, al contrario de lo que ocurre normalmente, este aislado no forma parte de la biosfera rara en esos ambientes y probablemente tiene un papel ecológico relevante en el mismo., The Deep Blue Sea Enterprise, S.L. y Ministerio ciencia e innovación España (MICROMATES PGC2018-096956-B-C44 y MARBIOM RTC-2017-6405-1), incluyendo fondos FEDER., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Descripción de la diversidad, metabolismo, e indicios de replicación celular en sedimentos anaerobios hipersalinos de las salinas de S'Avall

  • Font-Verdera, Francisca
  • Liébana, Raquel
  • Viver, Tomeu
  • Rosselló-Mora, Ramón
Resumen del trabajo presentado a la XVI Reunión de la Red Nacional de Microorganismos Extremófilos, celebrada en sesiones telemáticas del 17 de diciembre 2020 al 25 febrero 2021., Este estudio ha sido financiado por los proyectos Salploma CLG2015_66686-C3-1-P del Ministerio de Ciencia, Innovación y Universidades de España, subproyectos Micromates PGC2018-096956-B-C41 y PGC2018-096956-B-C44, y Marbiom RTC-2017-6405- 1, que también fueron apoyados con fondos del Fondo Europeo de Desarrollo Regional (FEDER)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Importancia ecológica del pangenoma para la adaptación de las especies a cambios ambientales: genómica comparada de Salinibacter ruber

  • Viver, Tomeu
  • Conrad, Roth E.
  • Konstantinidis, Konstantinos T.
  • Rosselló-Mora, Ramón
Resumen del trabajo presentado a la XVI Reunión de la Red Nacional de Microorganismos Extremófilos, celebrada en sesiones telemáticas del 17 de diciembre 2020 al 25 febrero 2021., Ministerio de ciencia e innovación Gobierno de España (MICROMATES PGC2018-096956-B-C44 y MARBIOM RTC-2017-6405-1), incluyendo fondos (FEDER)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Salinas, bacterias y virus: evolución en acción

  • Ramos-Barbero, María Dolores
  • Viver, Tomeu
  • Villamor, Judith
  • Santos, Fernando
  • Carrillo Bautista, Myriam
  • Martínez-García, Manuel
  • Konstantinidis, Konstantinos T.
  • Rosselló-Mora, Ramón
  • Antón, Josefa
Resumen del trabajo presentado al XXVIII Congreso Nacional de Microbiología, celebrado virtualmente del 28 de junio al 2 de julio de 2021., Proyecto MICROMATES (subproyectos PGC2018-096956-B-C41 y C44) del Ministerio de Ciencia, Innovación y Universidades., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Metagenómica de una salina ancestral: monitorización de los cambios de las comunidades microbianas desde el subsuelo hasta la superficie

  • Ramos-Barbero, María Dolores
  • Viver, Tomeu
  • Zabaleta, Ane
  • Senel, Ece
  • Gomáriz, María
  • Antigüedad, Iñaki
  • Santos, Fernando
  • Martínez-García, Manuel
  • Rosselló-Mora, Ramón
  • Antón, Josefa
Resumen del trabajo presentado al XXVIII Congreso Nacional de Microbiología, celebrado virtualmente del 28 de junio al 2 de julio de 2021., Ministerio de ciencia e innovación Gobierno de España (MICROMATES PGC2018-096956- B-C44), incluyendo fondos (FEDER), y Generalitat Valenciana PROMETEO /2017/2019., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Dinámica y selección de comunidades halófilas extremas sometidas a estrés osmótico cíclico

  • Bustos, Esteban
  • Viver, Tomeu
  • Conrad, Roth E.
  • Venter, Stephanus N.
  • Konstantinidis, Konstantinos T.
  • Bosch, Rafael
  • Rosselló-Mora, Ramón
Resumen del trabajo presentado al XXVIII Congreso Nacional de Microbiología, celebrado virtualmente del 28 de junio al 2 de julio de 2021., Ministerio de ciencia e innovación Gobierno de España (MICROMATES PGC2018-096956- B-C44; MARBIOM RTC-2017-6405-1), incluyendo fondos (FEDER). Contrato predoctoral FPI 2019 (PRE2019-088016)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

¿Qué es una “cepa” y cuántas de la misma especie coexistirían en un sistema natural?

  • Viver, Tomeu
  • Conrad, Roth E.
  • Venter, Stephanus N.
  • Konstantinidis, Konstantinos T.
  • Rosselló-Mora, Ramón
Resumen del trabajo presentado al XXVIII Congreso Nacional de Microbiología, celebrado virtualmente del 28 de junio al 2 de julio de 2021., Ministerio de ciencia e innovación Gobierno de España (MICROMATES PGC2018-096956- B-C44 y MARBIOM RTC-2017-6405-1), incluyendo fondos FEDER., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Análisis transcriptómico de Arthrobacter sp. Helios cultivado en condiciones de baja actividad de agua

  • Hernández, Gabriel
  • Castillo López, María
  • Galán, Beatriz
  • García, José Luis
1 p., Arthrobacter sp. Helios es una actinobacteria aislada de los paneles solares de la Universidad de Valencia (España). Esta bacteria destaca por su gran resistencia a la desecación (xerotolerancia), aparte de por soportar otras condiciones extremas como una alta concentración de sales o grandes dosis de radiación UV. Las bacterias presentan distintos mecanismos para sobrevivir a condiciones de sequía, entre los que encontramos la acumulación de iones potasio o de solutos compatibles, como pueden ser la trehalosa o la glicina betaína, la eliminación de especies reactivas de oxígeno o la producción de exopolisacáridos. En este trabajo, para conocer cuáles son los mecanismos de tolerancia a la desecación presentes en Arthrobacter sp. Helios, se realizó un estudio transcriptómico en presencia de concentraciones crecientes de polietilenglicol 6000. Este compuesto es capaz de retener una gran cantidad de agua haciéndola menos biodisponible y, por tanto,disminuyendo la actividad de agua y aumentando el estrés mátrico. En estas condiciones experimentales se han observado diferentes genes diferencialmente expresados que están involucrados en distintas funciones esenciales, como el transporte de iones y pequeñas moléculas orgánicas, la protección del ADN o la biosíntesis del flagelo. El estudio de esta cepa resulta de gran interés por sus posibles aplicaciones biotecnológicas como chasis xerotolerante y como posible fertilizante natural., Este trabajo se ha financiado con el proyecto nacional RTI2018-095584-B-C44 del Ministerio de Ciencia e Innovación de España., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Análisis de los mecanismos de xerotolerancia de Exiguobacterium sp Helios mediante su transcriptoma

  • Castillo López, María
  • Galán, Beatriz
  • Navarro Llorens, Juana María
  • García, José Luis
1 p.-7 fig., Los mecanismos por los cuales los organismos se adaptan a ambientes extremos nos ofrecen pistas de cómo alcanzar la estabilidad macromolecular en condiciones de estrés. Especialmente, el conocimiento de los mecanismos de xerotolerancia (resistencia a la desecación) puede contribuir a preservar por largo tiempo cepas de interés industrial mediante procedimientos diferentes a la liofilización o a desarrollar bacterias capaces de actuar en procesos en condiciones de desecación extremas. Nuestro interés se centra en el estudio como modelo de Exiguobacterium sp. Helios, una bacteria xerotolerante no esporulada aislada de un panel solar en la Universidad de Valencia. Se ha comprobado que esta bacteria presenta una resistencia a la desecación superior a la de otras cepas de su mismo género, observándose cambios morfológicos significativos a lo largo de su curva de crecimiento que podrían explicar su xerotolerancia, En este trabajo, hemos realizado un análisis transcriptómico de esta cepa, comparando la expresión génica de las células en fase exponencial y estacionaria de crecimiento, y tras un proceso de desecación, para intentar relacionar los mecanismos responsables de su capacidad xerotolerante que pudiesen estar ligados a sus distintas fases de crecimiento. Algunos genes diferencialmente expresados en estas fases de crecimiento se han clonado Escherichia coli y se han realizado experimentos de resistencia a la desecación para confirmar su implicación en la xerotolerancia. Este análisis permitirá establecer Exiguobacterium sp. Helios como un chasis xerotolerante para realizar procesos de biorremediación o aplicaciones agrícolas en condiciones extremas de sequía., Este trabajo ha sido financiado por el proyecto RTI 2018 095584 B C 44 del Ministerio de Economía y Competitividad y la beca PRE 2019087933 del Ministerio de Universidades, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Contrasting level of contaminants in different urban land uses depending on the identity

  • Sala-Navarro, A. C.
  • Casado-Coy, Nuria
  • Campos-Castro, A.
  • Algora, Camelia
  • Aguilar-Santana, E.
  • Alday, Josu G.
  • Armas, Cristina
  • Bueno, C. Guillermo
  • Calvo, Leonor
  • Carmona-Yáñez, María D.
  • Centenaro, Giada
  • Dashevskaya, Svetlana
  • Durán, Jorge
  • Felipe Lucía, María
  • Fernández-Alonso, María José
  • García-Palacios, Pablo
  • Chamizo, Sonia
  • Riva, Enrique G. de la
  • Jiménez Prieto, Beatriz
  • Jiménez, Juan J.
  • Ladrón de Guevara, Mónica
  • Leo, María
  • López Velasco, Ana
  • Lorenzo, Carmen
  • Lucas Borja, Manuel Esteban
  • Pérez-López, Jesús
  • Plaza-Álvarez, Pedro A.
  • Prieto Aguilar, Iván
  • Terrones, Alejandro
  • Torres, Aurora
  • Delgado-Baquerizo, Manuel
  • Soliveres, Santiago
  • Beltrán-Sanahuja, A.
  • Sanz-Lázaro, Carlos
Póster presentado en el 24 th European Meeting on Environmental Chemistry 26-29 th November 2024, Alicante (Spain), Nowadays, the uncontrolled use of chemical products such as pesticides, as well as the poor management of waste, mainly plastics, has significantly contributed to increased environmental pollution. Studies on environmental pollution in urban areas are scarce, and are comparison with nearby natural areas are uncommon, despite the expectation that urban areas would be much more polluted. Urban areas have a great variety of land uses with different managements, which can affect their levels of different contaminants. This study assesses the contamination of four different urban green spaces across the Iberian Peninsula and compared them with natural areas nearby. Soil samples were collected from 54 cities and included five land use categories: Natural or Seminatural Ecosystems, Urban Parks, Urban Crops, Golf Courses and Green Roundabouts. Four types of soil contaminants, namely metals, pesticides, microplastics and dumps were studied. Metals (Cu, Pb, Cd, Zn, Ni, Cr, As) were determined and quantified by inductively coupled plasma optical emission spectrometry (ICP-OES); pesticides were determined by high-performance liquid chromatography coupled to tandem mass spectrometry (UHPLC-MS) focusing on 16 different pesticides; microplastics were extracted by density separation after pre-treatment with Fenton's reagent and determined by laser direct infrared microscopy (LDIR). The rubbish present in the different urban spaces was quantified and classified to determine the direct contamination derived from human activity. Regarding metals, the natural area and the golf course had a lower concentration of metals than the rest of the urban areas, with Zn being the most abundant metal in all the green spaces studied. In relation to pesticides, their concentration was lower in the natural area than in the urban areas, being notably higher in golf courses and urban crops. The fungicide family had the highest concentrations among pesticides with boscalid being the most abundant fungicide. In contrast to the other pollutants, microplastics were more prevalent in the natural areas. The highest concentration of microplastics corresponded to fragments and films dominated by polymers such as polyethylene terephthalate (PET) and polyurethane (PU). The abundance of rubbish was higher in urban than in natural areas, except for the golf courses, which were the least polluted with dumps, with plastics representing the largest fraction of waste in all areas. In general, excluding microplastics, all pollutants predominated in urban areas with respect to natural areas, but the type of land use of the urban area influenced the levels of different contaminants., This study has been funded by the Spanish Research Agency (URBANCHANGE, TED2021–130908B-C44).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Relación entre psicrofilia y xerotolerancia en Exiguobacterium

  • Castillo López, María
  • Navarro Llorens, Juana María
  • García, José Luis
1 p.-4 fig., El género Exiguobacterium abarca una gran variedad de especies con propiedades útiles para el desarrollo de aplicaciones biotecnológicas. Estas bacterias Gram-positivas se encuentran en hábitats extremos, desde glaciares hasta suelos tropicales, y por eso muestran una notable capacidad para resistir diferentes tipos de estrés abiótico. Exiguobacterium sp. Helios fue aislado como resultado de la bioprospección de la microbiota en un nicho extremo, en concreto, de un panel solar en España. Los resultados experimentales muestran que tanto esta bacteria como su especie más cercana, E. sibiricum aislado del permafrost siberiano, presentan una alta tolerancia a la desecación, entre otras poliextremofi lias, como la capacidad de crecer a bajas temperaturas.El cambio morfológico que experimentan las células de Exiguobacterium sp. Helios desde una forma bacilar en la fase exponencial de crecimiento a una forma cocoidea con una envoltura celular engrosada en la fase estacionaria de crecimiento sugiere que este fenotipo puede contribuir a su xerotolerancia. El objetivo del presente estudio ha sido por una parte determinar si las células de Exiguobacterium cultivadas a 4°C consiguen una mayor tolerancia a la desecación que aquellas cultivadas a 30°C, y por otra parte determinar mediante técnicas de microscopía si estas diferencias están relacionadas con los cambios morfológicos. La resistencia a la desecación o xerotolerancia de las células en su forma vegetativa (no esporuladas) no solo plantea interesantes interrogantes sobre los mecanismos moleculares implicados en esta tolerancia, sino que desde el punto de vista de su aplicación es de gran interés para la industria agroalimentaria., La investigación ha sido financiada por la beca de Formación del Personal Investigador del Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i (PRE2019-087933), y por los proyectos BIO2015-66960-C3-1-R, BIO2016-79736-R y PID2019-110612RB-I00 del Ministerio de Economía y Competitividad de España,RTI2018-095584-B-C41-42-43-44 del Ministerio de Ciencia e Innovación de España, y por la beca CSIC 2017 2 0I015., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Magnetic and electronic properties of hybrid metal–organic interfaces on rare earthgold surface compounds

  • Fernández, Laura
  • Castrillo-Bodero, Rodrigo
  • Blanco-Rey, María
  • Ali, Khadiza
  • Ortega, J. Enrique
  • Schiller, Frederik
Resumen del trabajo presentado al 13th Joint European Magnetic Symposia (JEMS), celebrado en Madrid del 27 de agosto al 1 de septiembre de 2023., Fundamental knowledge of magnetic and electronic interaction phenomena that takes place at the hybrid metalorganic interface is decisive to explore the possibility to create highly spin-polarized spinterfaces to enhance the performance of organic spintronic devices. To this end, tailoring magnetic properties on structurally robust substrates is crucial. Rare-earth/noble metal monolayer alloys, grown on gold surfaces, possess a big potential as nanostructured magnetic templates with structural stability. Different elements of the lanthanide series have been observed to form surface-confined alloys in Au(111), characterized by a high crystal quality and nanoscale periodic corrugation. We have prepared hybrid metal–organic interfaces by the adsorption of copper phthalocyanine CuPc on REAu2 monolayers (RE = Gd, Ho and Yb) and studied their growth, electrostatics, electronic structure and magnetic properties. We observe a significant effect of the RE valence of the substrate on the carrier injection barrier of the hybrid metal–organic interface. CuPc adsorbed on trivalent RE-based surfaces (HoAu2 and GdAu2) exhibits molecular level energies that may allow injection carriers significantly closer to an ambipolar injection behavior than in the divalent case (YbAu2). Moreover, the magnetic exchange coupling between the ferromagnetic surfaces (HoAu2 and GdAu2) and the CuPc layer is explored, studing the effect of the RE atom on the magnetic behavior of the hybrid metal-organic interface., The authors acknowlege Spanish Ministerio de Ciencia e Innovación (grants No. MAT-2017-88374-P, PID2020-116093RB-C44, PID2019-103910GB-I00 and PTA2019-018134-I and the Basque Government (grants No. IT-1591-22, IT-152722), the EU Horizon 2020 through the Marie Skłodowska-Curie Grant MagicFACE No. 797109., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

The very high energy view of gamma-ray bursts with the MAGIC telescopes

  • Berti, A.
  • Bosnjak, Z.
  • Castro-Tirado, Alberto J.
  • Covino, S.
  • Inoue, S.
  • Longo, F.
  • Loporchio, S.
  • Miceli, D.
  • Mirzoyan, R.
  • Moretti, E.
  • Nava, L.
  • Noda, K.
  • Paneque, D.
  • Stamerra, A.
  • Suda, Y.
  • Terauchi, K.
  • Vovk, I.
  • Asano, K.
  • Fukami, S.
  • Jordana-Mitjans, N.
  • Melandri, A.
  • Mundell, C.
  • Palatiello, M.
  • Shrestha, M.
  • Steele, I.
  • MAGIC Collaboration
39th International Cosmic Ray Conference, 15─24 Jul 2025; Geneva, Switzerland; Published December 30, 2025., Gamma-ray bursts (GRBs) are one of the main targets for the observations of the MAGIC telescopes. As a result of the effort in improving the sensitivity of the instrument and the automatic follow-up strategy, MAGIC detected two GRBs in the very-high-energy (VHE, E > 100 GeV) range, namely GRB 190114C and GRB 201216C. In GRB 190114C (z = 0.42), the data collected by MAGIC revealed a new emission component at sub-TeV energies in the afterglow of the GRB. The very rich multi-wavelength dataset, spanning 17 orders of magnitude in energy, allowed to perform a detailed modelling of the broadband emission. The multi-wavelength data could be modelled within a one-zone synchrotron-self Compton scenario with internal γ − γ absorption, where the model parameters are compatible with those found in previous GRB afterglow studies below GeV energies. Similarly, GRB 201216C broadband emission could be explained using the same model, although the amount of simultaneous multi-wavelength data is reduced with respect to GRB 190114C. In particular, GRB 201216C challenged the current MAGIC detection potential, as its redshift was determined to be z = 1.1, strongly reducing the observed gamma-ray flux but making it the most distant source detected at VHE. These two detections, accompanied by evidence of VHE emission from a few more GRBs, opened up new questions such as the presence of sub-TeV emission in different classes and phases of GRBs. In this contribution we will present the status of the MAGIC GRB follow-up program, with an highlight on its detected GRBs. Moreover we will show the results on the GRBs observed by MAGIC from 2013 to 2019 with no evidence of VHE emission, in particular for those with simultaneous X-ray observations and redshift z < 2. We will discuss the implications of these results for GRB physics and the challenges and prospects for future GRB observations with MAGIC. © Copyright owned by the author(s)., We would like to thank the Instituto de Astrofísica de Canarias for the excellent working conditions at the Observatorio del Roque de los Muchachos in La Palma. The financial support of the German BMBF, MPG and HGF; the Italian INFN and INAF; the Swiss National Fund SNF; the grants PID2019-107988GB-C22, PID2022-136828NB-C41, PID2022137810NB-C22, PID2022-138172NB-C41, PID2022-138172NB-C42, PID2022-138172NB-C43, PID2022-139117NB-C41, PID2022-139117NB-C42, PID2022-139117NB-C43, PID2022-139117NB-C44, CNS2023-144504 funded by the Spanish MCIN/AEI/ 10.13039/501100011033 and "ERDF A way of making Europe; the Indian Department of Atomic Energy; the Japanese ICRR, the University of Tokyo, JSPS, and MEXT; the Bulgarian Ministry of Education and Science, National RI Roadmap Project DO1-400/18.12.2020 and the Academy of Finland grant nr. 320045 is gratefully acknowledged. This work was also been supported by Centros de Excelencia “Severo Ochoa” y Unidades “María de Maeztu” program of the Spanish MCIN/AEI/ 10.13039/501100011033 (CEX2019-000920-S, CEX2019-000918-M, CEX2021-001131-S) and by the CERCA institution and grants 2021SGR00426 and 2021SGR00773 of the Generalitat de Catalunya; by the Croatian Science Foundation (HrZZ) Project IP-2022-10-4595 and the University of Rijeka Project uniri-prirod-18-48; by the Deutsche Forschungsgemeinschaft (SFB1491) and by the Lamarr-Institute for Machine Learning and Artificial Intelligence; by the Polish Ministry Of Education and Science grant No. 2021/WK/08; and by the Brazilian MCTIC, CNPq and FAPERJ., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000920-S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2019-000918-M)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001131-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Next-day observation processing for the LST-1 and MAGIC

  • Dinesh, A.
  • Láinez, M.
  • Cerviño, R. A.
  • Morcuende, Daniel
  • Moralejo, A.
  • Contreras, J. L.
  • Baquero, A.
  • Lozano, J.
  • Agudo, Iván
  • Kornecki, P.
  • López-Coto, Rubén
  • Mestre, Enrique
  • Otero-Santos, J.
  • Torres, Diego F.
  • Zhang, Wei
  • CTAO-LST Project
  • MAGIC Collaboration
39th International Cosmic Ray Conference (ICRC2025) 15–24 July 2025 Geneva, Switzerland, The MAGIC and LST-1 telescopes, located at the Roque de los Muchachos Observatory on La Palma, operate dedicated On-Site Analysis (OSA) pipelines that provide rapid, automated processing of observational data. These systems produce high-level data products just a few hours after observations are completed, enabling quick-look analyses, next-day data quality assessments, and rapid-response science such as flare detection and Target of Opportunity follow-ups. OSA pipelines have been in continuous operation since 2012 for MAGIC and since 2021 for LST-1, automatically processing nightly data using the standard analysis chain. The experience gained from both systems provides essential lessons for the development of Cherenkov Telescope Array Observatory’s (CTAO’s) on-site analysis, demonstrating the practical and scientific benefits of fast data processing in Cherenkov telescopes. © Copyright owned by the author(s)., We acknowledge the financial support of the Spanish MICINN) under contracts PID2019-104114-RB-C32, and PID2021-126536OA-I00 and fellowship PRE2020-093502. A.Dinesh acknowledges the support of a UCM-Santander fellowship. We would also like to thank the Instituto de Astrofísica de Canarias for the excellent working conditions at the Observatorio del Roque de los Muchachos in La Palma. The financial support of the German BMBF, MPG and HGF; the Italian INFN and INAF; the Swiss National Fund SNF; the grants PID2019-107988GB-C22, PID2022136828NB-C41, PID2022-137810NB-C22, PID2022-138172NB-C41, PID2022-138172NB-C42, PID2022-138172NB-C43, PID2022-139117NB-C41, PID2022-139117NB-C42, PID2022-139117NB-C43, PID2022-139117NB-C44, CNS2023-144504 funded by the Spanish MCIN/AEI/ 10.13039/501100011033 and "ERDF A way of making Europe; the Indian Department of Atomic Energy; the Japanese ICRR, the University of Tokyo, JSPS, and MEXT; the Bulgarian Ministry of Education and Science, National RI Roadmap Project DO1-400/18.12.2020 and the Academy of Finland grant nr. 320045 is gratefully acknowledged. This work was also been supported by Centros de Excelencia “Severo Ochoa” y Unidades “María de Maeztu” program of the Spanish MCIN/AEI/ 10.13039/501100011033 (CEX2019-000920-S, CEX2019-000918-M, CEX2021-001131-S) and by the CERCA institution and grants 2021SGR00426 and 2021SGR00773 of the Generalitat de Catalunya; by the Croatian Science Foundation (HrZZ) Project IP-2022-10-4595 and the University of Rijeka Project uniri-prirod-18-48; by the Deutsche Forschungsgemeinschaft (SFB1491) and by the Lamarr-Institute for Machine Learning and Artificial Intelligence; by the Polish Ministry Of Education and Science grant No. 2021/WK/08; and by the Brazilian MCTIC, CNPq and FAPERJ. We gratefully acknowledge financial support from the following agencies and organisations: Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq), Fundação de Amparo à Pesquisa do Estado do Rio de Janeiro (FAPERJ), Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP), Fundação de Apoio à Ciência, Tecnologia e Inovação do Paraná- Fundação Araucária, Ministry of Science, Technology, Innovations and Communications (MCTIC), Brasil; Ministry of Education and Science, National RI Roadmap Project DO1-153/28.08.2018, Bulgaria; Croatian Science Foundation (HrZZ) Project IP-2022-10-4595, Rudjer Boskovic Institute, University of Osijek, University of Rijeka, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, University of Zagreb, Faculty of Electrical Engineering and Computing, Croatia; Ministry of Education, Youth and Sports, MEYS LM2023047, EU/MEYS CZ.02.1.01/0.0/0.0/16_013/0001403, CZ.02.1.01/0.0/0.0/18_046/0016007, CZ.02.1.01/0.0/0.0/16_019/0000754, CZ.02.01.01/00/22_008/0004632 and CZ.02.01.01/00/23_015/0008197 Czech Republic; CNRS-IN2P3, the French Programme d’investissements d’avenir and the Enigmass Labex, This work has been done thanks to the facilities offered by the Univ. Savoie Mont Blanc- CNRS/IN2P3 MUSTcomputingcenter, France;MaxPlanckSociety,German Bundesministerium für Bildungund Forschung (Verbundforschung/ErUM),Deutsche Forschungsgemeinschaft (SFBs 876and1491), Germany; Istituto Nazionale di Astrofisica (INAF), Istituto Nazionale di Fisica Nucleare (INFN), Italian Ministry for University and Research (MUR), and the financial support from the European Union– Next Generation EU under the project IR0000012- CTA+ (CUP C53C22000430006), announcement N.3264 on 28/12/2021: “Rafforzamento e creazione di IR nell’ambito del Piano Nazionale di Ripresa e Resilienza (PNRR)”; ICRR, University of Tokyo, JSPS, MEXT, Japan; JST SPRING-JPMJSP2108; NarodoweCentrum Nauki, grant number 2023/50/A/ST9/00254, Poland; The Spanish groups acknowledge the Spanish Ministry of Science and Innovation and the Spanish Research State Agency (AEI) through the government budget lines PGE2022/28.06.000X.711.04, 28.06.000X.411.01 and 28.06.000X.711.04 of PGE 2023, 2024 and 2025, and grants PID2019-104114RBC31, PID2019-107847RB-C44, PID2019-105510GB-C31, PID2019-104114RB-C33, PID2019-107847RB-C43, PID2019-107847RB-C42, PID2019-107988GB-C22, PID2021124581OB-I00, PID2021-125331NB-I00, PID2022-136828NB-C41, PID2022-137810NB-C22, PID2022-138172NB-C41, PID2022-138172NB-C42, PID2022-138172NB-C43, PID2022-139117NB-C41,PID2022-139117NB-C42,PID2022-139117NB-C43,PID2022-139117NB-C44,PID2022-136828NB-C42,PDC2023-145839-I00 funded by the Spanish MCIN/AEI/10.13039/501100011033 and “and by ERDF/EU andNext Generation EUPRTR; the"Centro de Excelencia SeveroOchoa" program through grants no. CEX2019-000920S, CEX2020-001007-S, CEX2021-001131-S; the "Unidad de Excelencia María de Maeztu" program through grants no. CEX2019-000918-M, CEX2020-001058-M; the "Ramón y Cajal" program through grants RYC2021-032991-I funded by MICIN/AEI/10.13039/501100011033 and the European Union “NextGeneratioonEU”/PRTR and RYC2020-028639-I; the "Juan de la Cierva-Incorporación" program through grant no. IJC2019-040315-I and "Juan de la Cierva-formación"’ through grant JDC2022-049705-I. They also acknowledge the "Atracción de Talento" program of Comunidad de Madrid through grant no. 2019-T2/TIC-12900; the project "Tecnologías avanzadas para la exploración del universo y sus componentes" (PR47/21 TAU), funded by Comunidad de Madrid, by the Recovery, Transformation and Resilience Plan from the Spanish State, and by NextGenerationEU from the European Union through the Recovery and Resilience Facility; “MAD4SPACE: Desarrollo de tecnologías habilitadoras para estudios del espacio en la Comunidad de Madrid" (TEC-2024/TEC-182) project funded by Comunidad de Madrid; the La Caixa Banking Foundation, grant no. LCF/BQ/PI21/11830030; Junta de Andalucía under Plan Complementario de I+D+I (Ref. AST22_0001) and Plan Andaluz de Investigación, Desarrollo e Innovación as research group FQM-322; Project ref. AST22_00001_9 with funding from NextGenerationEU funds; the “Ministerio de Ciencia, Innovación y Universidades” and its “Plan de Recuperación, Transformación y Resiliencia”; “Consejería de Universidad, Investigación e Innovación” of the regional government of Andalucía and “Consejo Superior de Investigaciones Científicas”, Grant CNS2023-144504 funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, the European Union’s Recovery and Resilience Facility-Next Generation, in the framework of the General Invitation of the Spanish Government’s public business entity Red.es to participate in talent attraction and retention programmes within Investment 4 of Component 19 of the Recovery, Transformation and Resilience Plan; Junta de Andalucía under Plan Complementario de I+D+I (Ref. AST22_00001), Plan Andaluz de Investigación, Desarrollo e Innovación (Ref. FQM-322). “Programa Operativo de Crecimiento Inteligente" FEDER 2014-2020 (Ref. ESFRI-2017-IAC-12), Ministerio de Ciencia e Innovación, 15% co-financed by Consejería de Economía, Industria, Comercio y Conocimiento del Gobierno de Canarias; the "CERCA" program and the grants 2021SGR00426 and 2021SGR00679, all funded by the Generalitat de Catalunya; and the European Union’s NextGenerationEU (PRTR-C17.I1). This research used the computing and storage resources provided by the Port d’Informació Científica (PIC) data center. State Secretariat for Education, Research and Innovation (SERI) and Swiss National Science Foundation (SNSF), Switzerland; The research leading to these results has received funding from the European Union’s Seventh Framework Programme (FP7/2007-2013) under grant agreements No 262053 and No 317446; This project is receiving funding from the European Union’s Horizon 2020 research and innovation programs under agreement No 676134; ESCAPE- The European Science Cluster of Astronomy & Particle Physics ESFRI Research Infrastructures has received funding from the European Union’s Horizon 2020 research and innovation programme under Grant Agreement no. 824064., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000920-S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2019-000918-M)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2020-001007-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001131-S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2020-001058-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Prospects and latest optical intensity interferometry results with the MAGIC and CTAO-North LST telescopes

  • Jiménez Martínez, Irene
  • Cifuentes Santos, Alejo
  • Hassan, Tarek
  • Acciari, Victor
  • Burelli, Irene
  • Cortina, Juan
  • della Volpe, Domenico
  • Díaz Ginzo, Carlos
  • Frías García-Lago, Fernando
  • Jorge, Iñigo
  • Martínez, Gustavo
  • Mirzoyan, Razmik
  • Polo, Miguel
  • Raiola, Aramis
  • Rodríguez-Vázquez, Juan José
  • Saha, Prasenjit
  • Schweizer, Thomas
  • Stanic, Lucijana
  • Agudo, Iván
  • Kornecki, P.
  • López-Coto, Rubén
  • Méndez, J.
  • Mestre, Enrique
  • Morcuende, Daniel
  • Otero-Santos, J.
  • Torres, Diego F.
  • Zhang, Wei
  • MAGIC Collaboration
  • CTAO-LST Project
39th International Cosmic Ray Conference (ICRC2025) 15–24 July 2025 Geneva, Switzerland, Along with their gamma-ray observations at very high energies (VHE;20 GeV - 100 TeV), the two 17-m MAGIC telescopes (at Roque de los Muchachos Observatory, La Palma) have also been utilized as an optical stellar intensity interferometer (SII) for the last six years. The calibration and validation of the setup, alongside the first measurement of the stellar angular diameter of 13 massive stars, were published in a performance paper in early 2024 [1]. Around the same time, the technical advancements developed for MAGIC were applied to the first Large-Sized Telescope of the northern hemisphere array of the Cherenkov Telescope Array Observatory (CTAO-North LST-1), a 23-m diameter telescope located near MAGIC. Three more LSTs should be completed beginning of 2026 and they may be equipped in the same manner as LST-1. We will focus on our first measurements with the MAGIC+LST-1 SII and our prospects for this and the MAGIC+LST1-4 SII for the study of several objects that are also known to emit in gamma rays: novae, such as the upcoming T CrB; winds from massive stars, particularly colliding-wind binaries; and Be stars which are typical companions in VHE gamma-ray binaries. © Copyright owned by the author(s)., We would like to thank the Instituto de Astrofísica de Canarias for the excellent working conditions at the Observatorio del Roque de los Muchachos in La Palma. The financial support of the German BMBF, MPG and HGF; the Italian INFN and INAF; the Swiss National Fund SNF; the grants PID2019-104114RB-C31, PID2019-104114RBC32, PID2019-104114RB-C33, PID2019-105510GB-C31, PID2019-107847RB-C41, PID2019-107847RB-C42, PID2019-107847RB-C44, PID2019-107988GB-C22, PID2022136828NB-C41, PID2022-137810NB-C22, PID2022-138172NB-C41, PID2022-138172NB-C42, PID2022-138172NB-C43, PID2022-139117NB-C41, PID2022-139117NB-C42, PID2022-139117NB-C43, PID2022-139117NB-C44 funded by the Spanish MCIN/AEI/ 10.13039/501100011033 and “ERDF A way of making Europe”; the Indian Department of Atomic Energy; the Japanese ICRR, the University of Tokyo, JSPS, and MEXT;the Bulgarian Ministry of Education and Science, National RI Roadmap Project DO1-400/18.12.2020 and the Academy of Finland grant nr. 320045 is gratefully acknowledged. This work was also been supported by Centros de Excelencia “Severo Ochoa” y Unidades “María de Maeztu” program of the Spanish MCIN/AEI/ 10.13039/501100011033 (CEX2019-000920-S, CEX2019-000918-M, CEX2021-001131-S) and by the CERCA institution and grants 2021SGR00426 and 2021SGR00773 of the Generalitat de Catalunya; by the Croatian Science Foundation (HrZZ) Project IP-2022-10-4595 and the University of Rijeka Project uniri-prirod-18-48; by the Deutsche Forschungsgemeinschaft (SFB1491) and by the Lamarr-Institute for Machine Learning and Artificial Intelligence; by the Polish Ministry Of Education and Science grant No. 2021/WK/08; and by the Brazilian MCTIC, CNPq and FAPERJ. We gratefully acknowledge financial support from the following agencies and organisations: Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq), Fundação de Amparo à Pesquisa do Estado do Rio de Janeiro (FAPERJ), Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP), Fundação de Apoio à Ciência, Tecnologia e Inovação do Paraná - Fundação Araucária, Ministry of Science, Technology, Innovations and Communications (MCTIC), Brasil; Ministry of Education and Science, National RI Roadmap Project DO1-153/28.08.2018, Bulgaria; Croatian Science Foundation (HrZZ) Project IP-2022-10-4595, Rudjer Boskovic Institute, University of Osijek, University of Rijeka, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, University of Zagreb, Faculty of Electrical Engineering and Computing, Croatia; Ministry of Education, Youth and Sports, MEYS LM2023047, EU/MEYS CZ.02.1.01/0.0/0.0/16_013/0001403, CZ.02.1.01/0.0/0.0/18_046/0016007, CZ.02.1.01/0.0/0.0/16_019/0000754, CZ.02.01.01/00/22_008/0004632 and CZ.02.01.01/00/23_015/0008197 Czech Republic; CNRS-IN2P3, the French Programme d’investissements d’avenir and the Enigmass Labex, This work has been done thanks to the facilities offered by the Univ. Savoie Mont Blanc - CNRS/IN2P3 MUST computing center, France; Max Planck Society, German Bundesministerium für Bildung und Forschung (Verbundforschung / ErUM), Deutsche Forschungsgemeinschaft (SFBs 876 and 1491), Germany; Istituto Nazionale di Astrofisica (INAF), Istituto Nazionale di Fisica Nucleare (INFN), Italian Ministry for University and Research (MUR), and the financial support from the European Union – Next Generation EU under the project IR0000012 - CTA+ (CUP C53C22000430006), announcement N.3264 on 28/12/2021: “Rafforzamento e creazione di IR nell’ambito del Piano Nazionale di Ripresa e Resilienza (PNRR)”; ICRR, University of Tokyo, JSPS, MEXT, Japan; JST SPRING - JPMJSP2108; Narodowe Centrum Nauki, grant number 2023/50/A/ST9/00254, Poland; The Spanish groups acknowledge the Spanish Ministry of Science and Innovation and the Spanish Research State Agency (AEI) through the government budget lines PGE2022/28.06.000X.711.04, 28.06.000X.411.01 and 28.06.000X.711.04 of PGE 2023, 2024 and 2025, and grants PID2019-104114RB-C31, PID2019-107847RB-C44, PID2019-104114RB-C32, PID2019-105510GB-C31, PID2019-104114RB-C33, PID2019-107847RBC43, PID2019-107847RB-C42, PID2019-107988GB-C22, PID2021-124581OB-I00, PID2021-125331NB-I00, PID2022-136828NB-C41, PID2022-137810NB-C22, PID2022-138172NB-C41, PID2022-138172NB-C42, PID2022-138172NB-C43, PID2022-139117NB-C41, PID2022-139117NB-C42, PID2022-139117NB-C43, PID2022-139117NB-C44, PID2022-136828NB-C42, PDC2023-145839-I00 funded by the Spanish MCIN/AEI/10.13039/501100011033 and “and by ERDF/EU and NextGenerationEU PRTR; the "Centro de Excelencia Severo Ochoa" program through grants no. CEX2019-000920-S, CEX2020-001007-S, CEX2021-001131-S; the "Unidad de Excelencia María de Maeztu" program through grants no. CEX2019-000918-M, CEX2020-001058-M; the "Ramón y Cajal" program through grants RYC2021-032991-I funded by MICIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR and RYC2020-028639-I; the "Juan de la Cierva-Incorporación" program through grant no. IJC2019-040315-I and "Juan de la Cierva-formación"’ through grant JDC2022-049705-I. They also acknowledge the "Atracción de Talento" program of Comunidad de Madrid through grant no. 2019-T2/TIC-12900; the project "Tecnologías avanzadas para la exploración del universo y sus componentes" (PR47/21 TAU), funded by Comunidad de Madrid, by the Recovery, Transformation and Resilience Plan from the Spanish State, and by NextGenerationEU from the European Union through the Recovery and Resilience Facility; “MAD4SPACE: Desarrollo de tecnologías habilitadoras para estudios del espacio en la Comunidad de Madrid" (TEC-2024/TEC-182) project funded by Comunidad de Madrid; the La Caixa Banking Foundation, grant no. LCF/BQ/PI21/11830030; Junta de Andalucía under Plan Complementario de I+D+I (Ref. AST22_0001) and Plan Andaluz de Investigación, Desarrollo e Innovación as research group FQM-322; Project ref. AST22_00001_9 with funding from NextGenerationEU funds; the “Ministerio de Ciencia, Innovación y Universidades” and its “Plan de Recuperación, Transformación y Resiliencia”; “Consejería de Universidad, Investigación e Innovación” of the regional government of Andalucía and “Consejo Superior de Investigaciones Científicas”, Grant CNS2023-144504 funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, the European Union’s Recovery and Resilience Facility-Next Generation, in the framework of the General Invitation of the Spanish Government’s public business entity Red.es to participate in talent attraction and retention programmes within Investment 4 of Component 19 of the Recovery, Transformation and Resilience Plan; Junta de Andalucía under Plan Complementario de I+D+I (Ref. AST22_00001), Plan Andaluz de Investigación, Desarrollo e Innovación (Ref. FQM-322). “Programa Operativo de Crecimiento Inteligente" FEDER 2014-2020 (Ref. ESFRI-2017-IAC-12), Ministerio de Ciencia e Innovación, 15% co-financed by Consejería de Economía, Industria, Comercio y Conocimiento del Gobierno de Canarias; the "CERCA" program and the grants 2021SGR00426 and 2021SGR00679, all funded by the Generalitat de Catalunya; and the European Union’s NextGenerationEU (PRTR-C17.I1). This research used the computing and storage resources provided by the Port d’Informació Científica (PIC) data center. State Secretariat for Education, Research and Innovation (SERI) and Swiss National Science Foundation (SNSF), Switzerland; The research leading to these results has received funding from the European Union’s Seventh Framework Programme (FP7/2007-2013) under grant agreements No 262053 and No 317446; This project is receiving funding from the European Union’s Horizon 2020 research and innovation programs under agreement No 676134; ESCAPE - The European Science Cluster of Astronomy & Particle Physics ESFRI Research Infrastructures has received funding from the European Union’s Horizon 2020 research and innovation programme under Grant Agreement no. 824064., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000920-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2020-001007-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001131-S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2019-000918-M)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2020-001058-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Pushing the VHE Frontier: LST-1’s Inaugural Detection of the Distant Quasar OP 313

  • Takeishi, R.
  • Arbet-Engels, A.
  • Baxter, J.
  • Heckmann, L.
  • Morcuende, Daniel
  • Nievas-Rosillo, M.
  • Otero-Santos, J.
  • Sanchez, D. A.
  • Agudo, Iván
  • Kornecki, P.
  • López-Coto, Rubén
  • Méndez-Gallego, J.
  • Mestre, Enrique
  • Torres, Diego F.
  • Zhang, Wei
  • MAGIC Collaboration
  • CTAO-LST collaboration
39th International Cosmic Ray Conference (ICRC2025).--15–24 July 2025.--Geneva, Switzerland.--Conference code 216790, In December 2023, the Flat Spectrum Radio Quasar OP 313 experienced an extraordinary very-high-energy (VHE, E > 100 GeV) gamma-ray flare, reaching an integral flux of 0.3 Crab Units above 100 GeV. This event marked the first VHE detection of OP 313 by the first Large-Sized Telescope (LST-1) at the Northern site of the Cherenkov Telescope Array Observatory, delivering its inaugural scientific result and establishing OP 313 as the most distant blazar detected in this energy regime (z = 0.997). Coordinated observations with LST-1, the MAGIC telescopes, and Fermi-LAT enabled us to capture the detailed spectral and temporal evolution of the flare, which we compared with a low-emission state observed in January 2024. A complementary multi-wavelength campaign — from radio through X-rays — enabled us to construct and model the broad-band spectral energy distribution within a two-zone leptonic framework. In this scenario, synchrotron and external Compton processes, involving seed photons from the dusty torus and broad-line region, account for the observed emission, although several combinations of photon fields remain plausible. Furthermore, the broad energy coverage provided by our observations allowed us to probe the attenuation of VHE gamma-rays by the Extragalactic Background Light, yielding competitive upper limits on its intensity. This work not only demonstrates the breakthrough capabilities of LST-1 in VHE gamma-ray astronomy but also provides fresh insights into the complex radiative mechanisms of high-redshift blazars, paving the way for future studies of extreme extragalactic sources. © Copyright owned by the author(s)., We would like to thank the Instituto de Astrofísica de Canarias for the excellent working conditions at the Observatorio del Roque de los Muchachos in La Palma. The financial support of the German BMBF,MPGand HGF; the Italian INFN and INAF; the Swiss National Fund SNF; the grants PID2019-107988GB-C22, PID2022-136828NB-C41, PID2022137810NB-C22, PID2022-138172NB-C41, PID2022-138172NB-C42, PID2022-138172NB-C43, PID2022-139117NB-C41, PID2022-139117NB-C42, PID2022-139117NB-C43, PID2022-139117NB-C44, CNS2023-144504 funded by the Spanish MCIN/AEI/ 10.13039/501100011033 and "ERDF A way of making Europe; the Indian Department of Atomic Energy; the Japanese ICRR, the University of Tokyo, JSPS, and MEXT; the Bulgarian Ministry of Education and Science, National RI Roadmap Project DO1-400/18.12.2020 and the Academy of Finland grant nr. 320045 is gratefully acknowledged. This work was also been supported by Centros de Excelencia “Severo Ochoa” y Unidades “María de Maeztu” program of the Spanish MCIN/AEI/ 10.13039/501100011033 (CEX2019-000920-S, CEX2019-000918-M, CEX2021-001131-S) and by the CERCA institution and grants 2021SGR00426 and 2021SGR00773 of the Generalitat de Catalunya; by the Croatian Science Foundation (HrZZ) Project IP-2022-10-4595 and the University of Rijeka Project uniri-prirod-18-48; by the Deutsche Forschungsgemeinschaft (SFB1491) and by the Lamarr-Institute for Machine Learning and Artificial Intelligence; by the Polish Ministry Of Education and Science grant No. 2021/WK/08; and by the Brazilian MCTIC, CNPq and FAPERJ. We gratefully acknowledge financial support from the following agencies and organisations: Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq), Fundação de Amparo à Pesquisa do Estado do Rio de Janeiro (FAPERJ), Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP), Fundação de Apoio à Ciência, Tecnologia e Inovação do Paraná- Fundação Araucária, Ministry of Science, Technology, Innovations and Communications (MCTIC), Brasil; Ministry of Education and Science, National RI Roadmap Project DO1-153/28.08.2018, Bulgaria; Croatian Science Foundation (HrZZ) Project IP-2022-10-4595, Rudjer Boskovic Institute, University of Osijek, University of Rijeka, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, University of Zagreb, Faculty of Electrical Engineering and Computing, Croatia; Ministry of Education, Youth and Sports, MEYS LM2023047, EU/MEYS CZ.02.1.01/0.0/0.0/16_013/0001403, CZ.02.1.01/0.0/0.0/18_046/0016007, CZ.02.1.01/0.0/0.0/16_019/0000754, CZ.02.01.01/00/22_008/0004632 and CZ.02.01.01/00/23_015/0008197 Czech Republic; CNRS-IN2P3, the French Programme d’investissements d’avenir and the Enigmass Labex, This work has been done thanks to the facilities offered by the Univ. Savoie Mont Blanc- CNRS/IN2P3 MUST computing center, France; Max Planck Society, German Bundesministerium für Bildung und Forschung (Verbundforschung / ErUM), Deutsche Forschungsgemeinschaft (SFBs 876 and 1491), Germany; Istituto Nazionale di Astrofisica (INAF), Istituto Nazionale di Fisica Nucleare (INFN), Italian Ministry for University and Research (MUR), and the financial support from the European Union– Next Generation EU under the project IR0000012- CTA+ (CUP C53C22000430006), announcement N.3264 on 28/12/2021: “Rafforzamento e creazione di IR nell’ambito del Piano Nazionale di Ripresa e Resilienza (PNRR)”; ICRR, University of Tokyo, JSPS, MEXT, Japan; JST SPRING- JPMJSP2108; Narodowe Centrum Nauki, grant number 2023/50/A/ST9/00254, Poland; The Spanish groups acknowledge the Spanish Ministry of Science and Innovation and the Spanish Research State Agency (AEI) through the government budget lines PGE2022/28.06.000X.711.04, 28.06.000X.411.01 and 28.06.000X.711.04 of PGE 2023, 2024 and 2025, and grants PID2019-104114RB-C31, PID2019-107847RB-C44, PID2019-104114RB-C32, PID2019-105510GB-C31, PID2019-104114RB-C33, PID2019-107847RBC43, PID2019-107847RB-C42, PID2019-107988GB-C22, PID2021-124581OB-I00, PID2021-125331NB-I00, PID2022-136828NB-C41, PID2022-137810NB-C22, PID2022138172NB-C41, PID2022-138172NB-C42, PID2022-138172NB-C43, PID2022-139117NB-C41, PID2022-139117NB-C42, PID2022-139117NB-C43, PID2022-139117NB-C44, PID2022-136828NB-C42, PDC2023-145839-I00 funded by the Spanish MCIN/AEI/10.13039/501100011033 and “and by ERDF/EU and NextGenerationEU PRTR; the "Centro de Excelencia Severo Ochoa" program through grants no. CEX2019-000920-S, CEX2020-001007-S, CEX2021-001131-S; the "Unidad de Excelencia María de Maeztu" program through grants no. CEX2019-000918-M, CEX2020-001058-M; the "Ramón y Cajal" program through grants RYC2021-032991-I funded by MICIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR and RYC2020-028639-I; the "Juan de la Cierva-Incorporación" program through grant no. IJC2019-040315-I and "Juan de la Cierva-formación"’ through grant JDC2022-049705-I. They also acknowledge the "Atracción de Talento" program of Comunidad de Madrid through grant no. 2019-T2/TIC-12900; the project "Tecnologías avanzadas para la exploración del universo y sus componentes" (PR47/21 TAU), funded by Comunidad de Madrid, by the Recovery, Transformation and Resilience Plan from the Spanish State, and by NextGenerationEU from the European Union through the Recovery and Resilience Facility; “MAD4SPACE: Desarrollo de tecnologías habilitadoras para estudios del espacio en la Comunidad de Madrid" (TEC-2024/TEC-182) project funded by Comunidad de Madrid; the La Caixa Banking Foundation, grant no. LCF/BQ/PI21/11830030; Junta de Andalucía under Plan Complementario de I+D+I (Ref. AST22_0001) and Plan Andaluz de Investigación, Desarrollo e Innovación as research group FQM-322; Project ref. AST22_00001_9 with funding from NextGenerationEU funds; the “Ministerio de Ciencia, Innovación y Universidades” and its “Plan de Recuperación, Transformación y Resiliencia”; “Consejería de Universidad, Investigación e Innovación” of the regional government of Andalucía and “Consejo Superior de Investigaciones Científicas”, Grant CNS2023-144504 funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, the European Union’s Recovery and Resilience Facility-Next Generation, in the framework of the General Invitation of the Spanish Government’s public business entity Red.es to participate in talent attraction and retention programmes within Investment 4 of Component 19 of the Recovery, Transformation and Resilience Plan; Junta de Andalucía under Plan Complementario de I+D+I (Ref. AST22_00001), Plan Andaluz de Investigación, Desarrollo e Innovación (Ref. FQM-322). “Programa Operativo de Crecimiento Inteligente" FEDER 2014-2020 (Ref. ESFRI-2017-IAC-12), Ministerio de Ciencia e Innovación, 15% co-financed by Consejería de Economía, Industria, Comercio y Conocimiento del Gobierno de Canarias; the "CERCA" program and the grants 2021SGR00426 and 2021SGR00679, all funded by the Generalitat de Catalunya; and the European Union’s NextGenerationEU (PRTR-C17.I1). This research used the computing and storage resources provided by the Port d’Informació Científica (PIC) data center. State Secretariat for Education, Research and Innovation (SERI) and Swiss National Science Foundation (SNSF), Switzerland; The research leading to these results has received funding from the European Union’s Seventh Framework Programme(FP7/2007-2013) under grant agreements No 262053 and No317446; This project is receiving funding from the European Union’s Horizon 2020 research and innovation programs under agreement No 676134; ESCAPE- The European Science Cluster of Astronomy & Particle Physics ESFRI Research Infrastructures has received funding from the European Union’s Horizon 2020 research and innovation programme under Grant Agreement no. 824064., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000920-S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2019-000918-M)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001131-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2020-001007-S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2020-001058-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Recent observations of PKS 2155-304 with MAGIC and LST-1 in a multi-wavelength context

  • Nikolić, L.
  • Verna, G.
  • Manganaro, M.
  • Bonnoli, G.
  • Agudo, Iván
  • Silvestri, G.
  • Cerasole, D.
  • Schiavone, F.
  • Podobnik, F.
  • Otero-Santos, J.
  • Kornecki, P.
  • López-Coto, Rubén
  • Méndez-Gallego, J.
  • Mestre, Enrique
  • Morcuende, Daniel
  • Torres, Diego F.
  • Zhang, Wei
  • MAGIC Collaboration
  • CTAO-LST Project
39th International Cosmic Ray Conference (ICRC2025).--15–24 July 2025.--Geneva, Switzerland.--Conference code 216790, PKS 2155-304 is a well-known high-frequency peaked BL Lac (HBL) at redshift z=0.116, which has been extensively studied across the electromagnetic spectrum due to its rapid and large-amplitude variability. Several violent outbursts in X-rays and γ-rays have been observed in the past, with intra-night variability in very-high-energy γ-rays (VHE; E > 100 GeV) detected down to the minute timescale. The alternation of quiescent and enhanced states, observed with a tentative quasi-periodicity of 1.74 ± 0.13 years in high-energy (HE; 100 MeV < E < 100 GeV) γ-rays, makes this source a key target also for ground-based γ-ray instruments and in particular for the Imaging Atmospheric Cherenkov Telescopes. Its brightness, proximity, and well-determined redshift make this γ-ray source a prime target for fundamental physics studies, including tests of Lorentz Invariance Violation (LIV), searches for axion-like particles (ALPs), and constraints on the distribution of the extragalactic background light (EBL). In the last two years, PKS 2155-304 has been independently monitored by the Major Atmospheric Gamma-ray Imaging Cherenkov (MAGIC) telescopes and the first Large-Sized Telescope (LST-1) of the Cherenkov Telescope Array Observatory (CTAO) located at the Roque de Los Muchachos Observatory (La Palma, Spain). The observations were carried out at large zenith angles (LZA; ZA > 55°), and the VHE data have been complemented with simultaneous observations in HE γ-rays (Fermi-LAT), X-rays (Swift-XRT) and optical wavelengths (ASAS-SN). © Copyright owned by the author(s)., We would like to thank the Instituto de Astrofísica de Canarias for the excellent working conditions at the Observatorio del Roque de los Muchachos in La Palma. The financial support of the German BMBF,MPG and HGF;the Italian INFN and INAF;the Swiss National Fund SNF;the grants PID2019-107988GB-C22, PID2022-136828NB-C41, PID2022137810NB-C22, PID2022-138172NB-C41, PID2022-138172NB-C42, PID2022-138172NB-C43, PID2022-139117NB-C41, PID2022-139117NB-C42, PID2022-139117NB-C43, PID2022-139117NB-C44, CNS2023-144504 funded by the Spanish MCIN/AEI/ 10.13039/501100011033 and "ERDF A way of making Europe; the Indian Department of Atomic Energy; the Japanese ICRR, the University of Tokyo, JSPS, and MEXT; the Bulgarian Ministry of Education and Science, National RI Roadmap Project DO1-400/18.12.2020 and the Academy of Finland grant nr. 320045 is gratefully acknowledged. This work was also been supported by Centros de Excelencia “Severo Ochoa” y Unidades “María de Maeztu” program of the Spanish MCIN/AEI/ 10.13039/501100011033 (CEX2019-000920-S, CEX2019-000918-M, CEX2021-001131-S) and by the CERCA institution and grants 2021SGR00426 and 2021SGR00773 of the Generalitat de Catalunya; by the Croatian Science Foundation (HrZZ) Project IP-2022-10-4595 and the University of Rijeka Project uniri-prirod-18-48; by the Deutsche Forschungsgemeinschaft (SFB1491) and by the Lamarr-Institute for Machine Learning and Artificial Intelligence; by the Polish Ministry Of Education and Science grant No. 2021/WK/08; and by the Brazilian MCTIC, CNPq and FAPERJ. We gratefully acknowledge financial support from the following agencies and organisations: Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq), Fundação de Amparo à Pesquisa do Estado do Rio de Janeiro (FAPERJ), Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP), Fundação de Apoio à Ciência, Tecnologia e Inovação do Paraná- Fundação Araucária, Ministry of Science, Technology, Innovations and Communications (MCTIC), Brasil; Ministry of Education and Science, National RI Roadmap Project DO1-153/28.08.2018, Bulgaria; Croatian Science Foundation (HrZZ) Project IP-2022-10-4595, Rudjer Boskovic Institute, University of Osijek, University of Rijeka, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, University of Zagreb, Faculty of Electrical Engineering and Computing, Croatia; Ministry of Education, Youth and Sports, MEYS LM2023047, EU/MEYS CZ.02.1.01/0.0/0.0/16_013/0001403, CZ.02.1.01/0.0/0.0/18_046/0016007, CZ.02.1.01/0.0/0.0/16_019/0000754, CZ.02.01.01/00/22_008/0004632 and CZ.02.01.01/00/23_015/0008197 Czech Republic; CNRS-IN2P3, the French Programme d’investissements d’avenir and the Enigmass Labex, This work has been done thanks to the facilities offered by the Univ. Savoie Mont Blanc- CNRS/IN2P3 MUST computing center, France; Max Planck Society, German Bundesministerium für Bildung und Forschung (Verbundforschung / ErUM), Deutsche Forschungsgemeinschaft (SFBs 876 and 1491), Germany; Istituto Nazionale di Astrofisica (INAF), Istituto Nazionale di Fisica Nucleare (INFN), Italian Ministry for University and Research (MUR), and the financial support from the European Union– Next Generation EU under the project IR0000012- CTA+ (CUP C53C22000430006), announcement N.3264 on 28/12/2021: “Rafforzamento e creazione di IR nell’ambito del Piano Nazionale di Ripresa e Resilienza (PNRR)”; ICRR, University of Tokyo, JSPS, MEXT, Japan; JST SPRING- JPMJSP2108; Narodowe Centrum Nauki, grant number 2023/50/A/ST9/00254, Poland; The Spanish groups acknowledge the Spanish Ministry of Science and Innovation and the Spanish Research State Agency (AEI) through the government budget lines PGE2022/28.06.000X.711.04, 28.06.000X.411.01 and 28.06.000X.711.04 of PGE 2023, 2024 and 2025, and grants PID2019-104114RB-C31, PID2019-107847RB-C44, PID2019-104114RB-C32, PID2019-105510GB-C31, PID2019-104114RB-C33, PID2019-107847RBC43, PID2019-107847RB-C42, PID2019-107988GB-C22, PID2021-124581OB-I00, PID2021-125331NB-I00, PID2022-136828NB-C41, PID2022-137810NB-C22, PID2022138172NB-C41, PID2022-138172NB-C42, PID2022-138172NB-C43, PID2022-139117NB-C41, PID2022-139117NB-C42, PID2022-139117NB-C43, PID2022-139117NB-C44, PID2022-136828NB-C42, PDC2023-145839-I00 funded by the Spanish MCIN/AEI/10.13039/501100011033 and “and by ERDF/EU and NextGenerationEU PRTR; the "Centro de Excelencia Severo Ochoa" program through grants no. CEX2019-000920-S, CEX2020-001007-S, CEX2021-001131-S; the "Unidad de Excelencia María de Maeztu" program through grants no. CEX2019-000918-M, CEX2020-001058-M; the "Ramón y Cajal" program through grants RYC2021-032991-I funded by MICIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR and RYC2020-028639-I; the "Juan de la Cierva-Incorporación" program through grant no. IJC2019-040315-I and "Juan de la Cierva-formación"’ through grant JDC2022-049705-I. They also acknowledge the "Atracción de Talento" program of Comunidad de Madrid through grant no. 2019-T2/TIC-12900; the project "Tecnologías avanzadas para la exploración del universo y sus componentes" (PR47/21 TAU), funded by Comunidad de Madrid, by the Recovery, Transformation and Resilience Plan from the Spanish State, and by NextGenerationEU from the European Union through the Recovery and Resilience Facility; “MAD4SPACE: Desarrollo de tecnologías habilitadoras para estudios del espacio en la Comunidad de Madrid" (TEC-2024/TEC-182) project funded by Comunidad de Madrid; the La Caixa Banking Foundation, grant no. LCF/BQ/PI21/11830030; Junta de Andalucía under Plan Complementario de I+D+I (Ref. AST22_0001) and Plan Andaluz de Investigación, Desarrollo e Innovación as research group FQM-322; Project ref. AST22_00001_9 with funding from NextGenerationEU funds; the “Ministerio de Ciencia, Innovación y Universidades” and its “Plan de Recuperación, Transformación y Resiliencia”; “Consejería de Universidad, Investigación e Innovación” of the regional government of Andalucía and “Consejo Superior de Investigaciones Científicas”, Grant CNS2023-144504 funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, the European Union’s Recovery and Resilience Facility-Next Generation, in the framework of the General Invitation of the Spanish Government’s public business entity Red.es to participate in talent attraction and retention programmes within Investment 4 of Component 19 of the Recovery, Transformation and Resilience Plan; Junta de Andalucía under Plan Complementario de I+D+I (Ref. AST22_00001), Plan Andaluz de Investigación, Desarrollo e Innovación (Ref. FQM-322). “Programa Operativo de Crecimiento Inteligente" FEDER 2014-2020 (Ref. ESFRI-2017-IAC-12), Ministerio de Ciencia e Innovación, 15% co-financed by Consejería de Economía, Industria, Comercio y Conocimiento del Gobierno de Canarias; the "CERCA" program and the grants 2021SGR00426 and 2021SGR00679, all funded by the Generalitat de Catalunya; and the European Union’s NextGenerationEU (PRTR-C17.I1). This research used the computing and storage resources provided by the Port d’Informació Científica (PIC) data center. State Secretariat for Education, Research and Innovation (SERI) and Swiss National Science Foundation (SNSF), Switzerland; The research leading to these results has received funding from the European Union’s Seventh Framework Programme(FP7/2007-2013) under grant agreements No 262053 and No317446; This project is receiving funding from the European Union’s Horizon 2020 research and innovation programs under agreement No 676134; ESCAPE- The European Science Cluster of Astronomy & Particle Physics ESFRI Research Infrastructures has received funding from the European Union’s Horizon 2020 research and innovation programme under Grant Agreement no. 824064., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000920-S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2019-000918-M)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001131-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2020-001007-S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2020-001058-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Long-term multiwavelength view and modeling of the blazar B2 1811+31 in high state

  • Cerasole, D.
  • Loporchio, S.
  • Agudo, Iván
  • Castro-Tirado, Alberto J.
  • López-Coto, Rubén
  • Menchiari, S.
  • Fermi-LAT Collaboration
  • MAGIC Collaboration
39th International Cosmic Ray Conference (ICRC2025).--15–24 July 2025.--Geneva, Switzerland.--Conference code, Intermediate synchrotron-peaked BL Lacs (IBLs) are quite rare sources in the very high-energy (VHE; 100GeV < E < 100TeV) 𝛾-ray sky. The IBL B21811+31 (𝑧 = 0.117) showed intense f laring activity in 2020. This event was detected by a wide range of multiwavelength (MWL) instruments from radio up to 𝛾 rays. The observations carried out by the MAGIC telescopes led to the first-time detection of VHE 𝛾-ray emission from B2 1811+31. In this contribution, we highlight the key results of our recent study [1], which offers a comprehensive analysis of the source emission both during the 2020 high-activity state and during the quiescent state. Using a comprehensive MWL dataset, we contextualize this high-state episode within the source emissions over 18 years, from 2005 to 2024. We attribute the VHE 𝛾-ray emission and the spectral and variability properties in the X-ray band to the electrons and positrons accelerated at the highest energies in the jet of the source. We propose a leptonic two-zone self-consistent model to interpret the observed MWL emission during the 2020 flaring state. © Copyright owned by the author(s)., We would like to thank the Instituto de Astrofísica de Canarias for the excellent working conditions at the Observatorio del Roque de los Muchachos in La Palma. The financial support of the German BMBF, MPG and HGF; the Italian INFN and INAF; the Swiss National Fund SNF; the grants PID2019-107988GB-C22, PID2022-136828NB-C41, PID2022137810NB-C22, PID2022-138172NB-C41, PID2022-138172NB-C42, PID2022-138172NB-C43, PID2022-139117NB-C41, PID2022-139117NB-C42, PID2022-139117NB-C43, PID2022-139117NB-C44, CNS2023-144504 funded by the Spanish MCIN/AEI/ 10.13039/501100011033 and "ERDF A way of making Europe; the Indian Department of Atomic Energy; the Japanese ICRR, the University of Tokyo, JSPS, and MEXT; the Bulgarian Ministry of Education and Science, National RI Roadmap Project DO1-400/18.12.2020 and the Academy of Finland grant nr. 320045 is gratefully acknowledged. This work was also been supported by Centros de Excelencia “Severo Ochoa” y Unidades “María de Maeztu” program of the Spanish MCIN/AEI/ 10.13039/501100011033 (CEX2019-000920-S, CEX2019-000918-M, CEX2021-001131-S) and by the CERCA institution and grants 2021SGR00426 and 2021SGR00773 of the Generalitat de Catalunya; by the Croatian Science Foundation (HrZZ) Project IP-2022-10-4595 and the University of Rijeka Project uniri-prirod-18-48; by the Deutsche Forschungsgemeinschaft (SFB1491) and by the Lamarr-Institute for Machine Learning and Artificial Intelligence; by the Polish Ministry Of Education and Science grant No. 2021/WK/08; and by the Brazilian MCTIC, CNPq and FAPERJ. This research has made use of data from the OVRO 40-m monitoring program [7], supported by private funding from the California Institute of Technology and the Max Planck Institute for Radio Astronomy, and by NASA grants NNX08AW31G, NNX11A043G, and NNX14AQ89GandNSFgrantsAST-0808050 and AST-1109911. The Fermi-LAT Collaboration acknowledges support for LAT development, operation and data analysis from NASAand DOE(United States), CEA/Irfu and IN2P3/CNRS (France), ASI and INFN (Italy), MEXT, KEK, and JAXA (Japan), and the K.A. Wallenberg Foundation, the Swedish Research Council and the National Space Board (Sweden). Science analysis support in the operations phase from INAF (Italy) and CNES (France) is also gratefully acknowledged. This work performed in part under DOE Contract DE-AC02-76SF00515. This work has made use of data from the Joan Oró Telescope (TJO) of the Montsec Observatory (OdM), which is owned by the Catalan Government and operated by the Institute for Space Studies of Catalonia (IEEC). This work is based on observations with the 100-m telescope of the MPIfR (Max-Planck-Institut für Radioastronomie) at Effelsberg., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2019-000920-S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2019-000918-M)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001131-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Galaxy evolution with J-PAS

  • Bonoli, S.
  • Acharya, N.
  • Cortesi, A.
  • Díaz-García, L. A.
  • González Delgado, Rosa M.
  • Iglesias-Páramo, J.
  • López, I. E.
  • Rahna, P. T.
  • Rodríguez-Martín, J. E.
  • Torralba, A.
  • Abramo, R.
  • Alcaniz, J.
  • Benitez, N.
  • Carneiro, S.
  • Cenarro, J.
  • Cristóbal-Hornillos, D.
  • Dupke, R.
  • Ederoclite, A.
  • Hernán-Caballero, A.
  • Hernández-Monteagudo, C.
  • López-Sanjuan, C.
  • Marín-Franch, A.
  • Mendes de Oliveira, C.
  • Moles, M.
  • Sodré, L., Jr.
  • Taylor, K.
  • Varela, J.
  • Vázquez Ramió, H.
Highlights of Spanish Astrophysics XII, Proceedings of the XVI Scientific Meeting of the Spanish Astronomical Society held on July 15-19, 2024, in Granada, Spain. M. Manteiga, F. González-Galindo, A. Labiano-Ortega, M.J. Martínez-González, N. Rea, M. Romero-Gómez, A. Ulla-Miguel, G. Yepes, C. Rodríguez-López, A. Gómez-García and C. Dafonte (eds), 2025, p. 74., The Javalambre Physics of the Accelerating Universe Survey (J-PAS) has started observing wide areas of the northern sky with its unique set of 56 filters: 54 narrow band and 2 broader f ilters that cover the full optical range and effectively deliver a low-resolution spectrum for every object detected. Observations are carried out from the dedicated Javalambre Survey Telescope (JST/T250), based in the Observatorio Astrof´ısico de Javalambre (OAJ) and equipped with the wide field camera JPCam. The combination of the wide area coverage, the multi-band information and the high spatial resolution, make J-PAS an ideal survey not only for cosmological probes, but also for galaxy evolution studies. In this work we show the potential of J-PAS in the field of galaxy evolution by using “mini-JPAS”, a small dataset of J-PAS-like data acquired during the testing phases of the JST/T250., S.B. acknowledge support from the Spanish Ministerio de Ciencia e Innovación through project PID2021-124243NB-C21. L.A.D.G., R.M.G.D., G.M.S., J.E.R.M. and J.I.P. acknowledge financial support from the State Agency for Research of the Spanish MCIU through Center of Excellence Severo Ochoa grant CEX2021-001131-S funded by MCIN/AEI/10.13039/501100011033. L.A.D.G., R.M.G.D., G.M.S., and J.E.R.M. acknowledge financial support from the project PID-2019- 109067GB100. G.M.S. and J.E.R.M. acknowledge financial support from project ref. AST22 00001 X. A.T. acknowledges the support from project reference ASFAE/2022/025. J.I.P. acknowledges financial support from project PID2022-136598NB-C32. This work is part of the research Project PID2023149420NB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU. The work is based on observations made with the JST250 telescope and PathFinder camera for the miniJPAS project at the Observatorio Astrof´ısico de Javalambre (OAJ), in Teruel, owned, managed, and operated by CEFCA. We acknowledge the OAJ Data Processing and Archiving Unit (UPAD). Funding for OAJ, UPAD, and CEFCA has been provided by the Governments of Spain and Aragón through the Fondo de Inversiones de Teruel and their general budgets; the Aragonese Government through the Research Groups E96, E103, E1617R, E1620R and E1623R; the MCIN/AEI/10.13039/501100011033 y FEDER with grants PID2021-124918NBC41, PID2021-124918NB-C42, PID2021-124918NA-C43, and PID2021-124918NB-C44; the MCIU/AEI/FEDER, UE with grant PGC2018-097585-B-C21; the MINECO under AYA2015-66211-C2-1-P, AYA2015-66211-C2-2, AYA2012- 30789, and ICTS-2009-14; and European FEDER funding (FCDD10-4E-867, FCDD13-4E-2685)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001131-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Local Extreme Emission Line Galaxies as gateways to the early Universe: insights from wide galaxy surveys

  • Lumbreras-Calle, A.
  • Fernández-Ontiveros, J. A.
  • Amorín, R.
  • Vílchez Medina, José Manuel
  • Arroyo-Polonio, A.
  • J-PLUS Collaboration
Highlights of Spanish Astrophysics XII, Proceedings of the XVI Scientific Meeting of the Spanish Astronomical Society held on July 15-19, 2024, in Granada, Spain. M. Manteiga, F. González-Galindo, A. Labiano-Ortega, M.J. Martínez-González, N. Rea, M. Romero-Gómez, A. Ulla-Miguel, G. Yepes, C. Rodríguez-López, A. Gómez-García and C. Dafonte (eds), 2025, p. 90., Extreme emission line galaxies (EELGs) are crucial for understanding the most intense star formation events in the Universe and the reionization of the Universe at the Cosmic Dawn (z>6). While EELGs are abundant during this epoch, their faintness prevents a detailed study of their physical properties. EELGs found at lower redshifts offer a unique opportunity to investigate the physics of reionization, however a precise selection and identification of these sources is extremely challenging. We used the J-PLUS survey, covering 3000 deg2 of the northern sky with 12 narrow and broadband filters, to identify over 1000 EELGs at z<0.35. These galaxies were identified by a flux excess in narrowband filters, indicative of very large equivalent widths (>300 ˚ A) in either [OIII]5007 or Hα, with a purity and completeness reaching ∼90% (considering available spectra). This approach avoids biases inherent in broadband color selections and allows the identification of fainter systems compared to spectroscopic surveys [8]. Spectroscopic follow-up observations on a subset of 50 J-PLUS candidates, supplemented by ancillary data, confirmed their EELG nature enabling the study of their physical properties through faint emission lines (Lumbreras-Calle et al. 2024 in prep). We find a remarkable similarity between low-z EELGs and JWST-detected galaxies at z>6, particularly in their position in the mass-metallicity diagram. Preliminary results from ancillary radio data (ALFALFA and FAST) suggest that the larger the HI gas reservoirs of the galaxies are, the stronger the starburst events. Ongoing multiwavelength and spectroscopic studies on this sample include Chandra and OSIRIS observations, as well as accepted upcoming studies with WEAVE and HST. These efforts aim to deepen our understanding of the properties and evolutionary mechanisms of EELGs, providing valuable insights into the formation of the first galaxies and the physical state of their interstellar medium., This work is based on observations made with the JAST80 telescope at the Observatorio Astrofísico de Javalambre (OAJ), in Teruel, owned, managed, and operated by the Centro de Estudios de Física del Cosmos de Aragón. We acknowledge the OAJ Data Processing and Archiving Unit (UPAD) for reducing and calibrating the OAJ data used in this work. Funding for the J-PLUS Project has been provided by the Governments of Spain and Aragón through the Fondo de Inversiones de Teruel; the Aragón Government through the Reseach Groups E96, E103, and E16 17R; the Spanish Ministry of Science, Innovation and Universities (MCIU/AEI/FEDER, UE) with grants PGC2018097585-B-C21 and PGC2018-097585-B-C22; the Spanish Ministry of Economy and Competitiveness (MINECO) under AYA2015-66211-C2-1-P, AYA2015-66211-C2-2, AYA2012-30789, and ICTS-200914; and European FEDER funding (FCDD10-4E-867, FCDD13-4E-2685). The Brazilian agencies FINEP, FAPESP, and the National Observatory of Brazil have also contributed to this project. ALC and JAFO acknowledge financial support by the Spanish Ministry of Science and Innovation (MCIN/AEI/10.13039/501100011033), by “ERDF A way of making Europe” and by “European Union NextGenerationEU/PRTR” through the grants PID2021-124918NB-C44 and CNS2023-145339; MCIN and the European Union– NextGenerationEU through the Recovery and Resilience Facility project ICTS-MRR-2021-03-CEFCA., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

In-vivo cell remote control: a mecano-electro computational study

  • Doweidar, M.H.
  • Mousavi, S.J.
Abstract ICBB17-12: Nowadays, due to its importance for human survival, tissue andorgans regeneration have received a high attention of the scientificcommunity. For the development of this field, understanding the cellbehavior is essential forin-vivotissue and organs regeneration. Cellbehavior can be controlledin-vitro, among other stimuli, by changingthe extracellular matrix mechanical properties, applying externalforces and/or electrical field. Controlling these stimuliin-vivois nottrivial. Therefore, in this work, to remotely control the local cellenvironment, we consider a microsphere of cell size that is fabricatedfrom a piezoelectric material and charged with nanomagnetic parti-cles. This microsphere is integrated within an extracellular matrix, insuch a way, through an external magnetic field, internal forces canbe generated within the microsphere. As a result, a stiffness gradientas well as an electric field are generated around the microsphere.These cues can be controlled externally by changing the magneticfield intensity...
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

Oscillation period of the truncated simple pendulum

  • Torcal-Milla, Francisco Jose
In this manuscript, a non typical kind of simple pendulum called Truncated Simple Pendulum is analysed to obtain its oscillation period, frequency, and angular frequency. It is easily derived that its motion can be viewed as the concatenation of two pendular movements with different lengths, contributing each one to half of the period of the complete oscillation. An analytical formulation is derived and corroborated with an experiment showing high agreement. This experiment could be interesting as a proposed exercise for the students or as a laboratory practical work. Besides, the gravity acceleration can be determined from each singular experiment and averaged to obtain it with lesser experimental error. In addition, it can be used to evaluate energy conservation theorem and small angle approximation (Law of isochronism) for the pendular oscillation. The level of the manuscript makes it appropriate for undergraduate students and introductory physics courses.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Cambios aspectuales en la evolución de los verbos psicológicos del español

  • Batllori Dillet, Montse
  • Gibert Sotelo, Elisabeth
  • Pujol Payet, Isabel
Congreso Internacional de Historia de la Lengua Española (Xè: 2015: Saragossa), Communication presented at the "X International Congress of History of the Spanish Language, held at the University of Zaragoza, from September 7 to 11, 2015. This paper focuses on the diachronic study of the psychological verbs classified by Belletti and Rizzi (1987) as 3rd group and it analyses their aspectual behaviour, Comunicación presentada en el "X Congreso Internacional de Historia de la Lengua Española, celebrado en la Universidad de Zaragoza, los días 7a 11 de septiembre de 2015. Este trabajo se centra en el estudio diacrónico de los verbos psicológicos clasificados como clase 3 por Belletti y Rizzi (1987) y analiza su comportamiento aspectual, Comunicació presentada al X Congrés Internacional d'Història de la Llengua Espanyola, celebrat a la Universitat de Saragossa, els dies 7a 11 de setembre de 2015. Aquest treball se centra en l'estudi diacrònic dels verbs psicològics classificats com a classe 3 per Belletti i Rizzi (1987) i n'analitza el comportament aspectual, Financiación de la investigación: FFI2011-29440-CO3-02, FFI2014-56968-C4-4-P, FPU12/01445 y 2014 SGR 1013
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Machine learning-based query augmentation for SPARQL endpoints

  • Rico Almodóvar, Mariano
  • Touma, Rizkallah
  • Queralt Calafat, Anna
  • Pérez Hernandez, María S.
Linked Data repositories have become a popular source of publicly-available data. Users accessing this data through SPARQL endpoints usually launch several restrictive yet similar consecutive queries, either to find the information they need through trial-and-error or to query related resources. However, instead of executing each individual query separately, query augmentation aims at modifying the incoming queries to retrieve more data that is potentially relevant to subsequent requests. In this paper, we propose a novel approach to query augmentation for SPARQL endpoints based on machine learning. Our approach separates the structure of the query from its contents and measures two types of similarity, which are then used to predict the structure and contents of the augmented query. We test the approach on the real-world query logs of the Spanish and English DBpedia and show that our approach yields high-accuracy prediction. We also show that, by caching the results of the predicted (More), This work has been supported by the European Union's Horizon 2020 research and innovation program (grant H2020-MSCA-ITN-2014-642963), the Spanish Ministry of Science and Innovation (contract TIN2015-65316, project RTC-2016-4952-7 and contract TIN2016-78011-C4-4-R), the Spanish Ministry of Education, Culture and Sports (contract CAS18/00333) and the Generalitat de Catalunya (contract 2014-SGR-1051). The authors would also like to thank Toni Cortes for his feedback., Peer Reviewed, Postprint (author's final draft)
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Laser Based Metallization using Silver Pastes

  • Molpeceres Álvarez, Carlos Luis|||0000-0002-6236-8359
  • Morales Furió, Miguel|||0000-0001-7425-9742
  • Canteli Pérez-Caballero, David|||0000-0001-6405-5893
  • Muñoz Martín, David|||0000-0001-5837-6367
  • Lauzurica Santiago, Sara|||0000-0003-4398-6474
  • Márquez Fernández, Andrés
  • Moreno Labella, Juan José|||0000-0003-2612-707X
  • Mínguez Martínez, Alberto|||0000-0001-5435-6035
  • Muñoz, Cristina
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Automatic enrichment of terminological resources: the IATERDF example

  • Arcan, Mihael
  • Montiel Ponsoda, Elena|||0000-0003-3263-3403
  • McCrae, John P.|||0000-0002-7227-1331
  • Buitelaar, Paul
citaREA. Repositorio Institucional del CITA
Publicación Contribución de congreso (ConferenceOutput)

Aislamiento y caracterización de bacteriófagos líticos frente a la bacteria fitopatógena Xanthomonas euvesicatoria

  • Biosca, Elena G.
  • Català Senent, José Francisco
  • Salas, Isabel
  • Molinero, Laia
  • Maicas, Sergi
  • Lucena, Teresa
  • Palacio Bielsa, Ana
  • Betrán, María
  • Arribas, Cristina
  • Alvarez, Belen
Este resultado es parte del proyecto de I+D+i PID2021-123600OR-C44, financiado por MICIU/AEI/10.13039/ 501100011033/ y por FEDER, EU.