Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 79
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Sulfate-Decorated Amorphous-Crystalline Cobalt-Iron Oxide Nanosheets to Enhance O-O Coupling in the Oxygen Evolution Reaction

  • Wang, Xiang
  • Li, Junshan|||0000-0002-1482-1972
  • Xue, Qian
  • Han, Xu|||0000-0001-8319-8830
  • Xing, Congcong|||0000-0001-7674-6720
  • Liang, Zhifu
  • Guardia, Pablo|||0000-0001-9076-4642
  • Zuo, Yong|||0000-0003-1564-467X
  • Du, Ruifeng
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The electrochemical oxygen evolution reaction (OER) plays a fundamental role in several energy technologies, which performance and cost-effectiveness are in large part related to the used OER electrocatalyst. Herein, we detail the synthesis of cobalt-iron oxide nanosheets containing controlled amounts of well-anchored SO42- anionic groups (CoFexOy-SO4). We use a cobalt-based zeolitic imidazolate framework (ZIF-67) as the structural template and a cobalt source and Mohr's salt ((NH4)2Fe(SO4)2·6H2O) as the source of iron and sulfate. When combining the ZIF-67 with ammonium iron sulfate, the protons produced by the ammonium ion hydrolysis (NH4+ + H2O = NH3·H2O + H+) etch the ZIF-67, dissociating its polyhedron structure, and form porous assemblies of two-dimensional nanostructures through a diffusion-controlled process. At the same time, iron ions partially replace cobalt within the structure, and SO42- ions are anchored on the material surface by exchange with organic ligands. As a result, ultrathin CoFexOy-SO4 nanosheets are obtained. The proposed synthetic procedure enables controlling the amount of Fe and SO4 ions and analyzing the effect of each element on the electrocatalytic activity. The optimized CoFexOy-SO4 material displays outstanding OER activity with a 10 mA cm-2 overpotential of 268 mV, a Tafel slope of 46.5 mV dec-1, and excellent stability during 62 h. This excellent performance is correlated to the material's structural and chemical parameters. The assembled nanosheet structure is characterized by a large electrochemically active surface area, a high density of reaction sites, and fast electron transportation. Meanwhile, the introduction of iron increases the electrical conductivity of the catalysts and provides fast reaction sites with optimum bond energy and spin state for the adsorption of OER intermediates. The presence of sulfate ions at the catalyst surface modifies the electronic energy level of active sites, regulates the adsorption of intermediates to reduce the OER overpotential, and promotes the surface charge transfer, which accelerates the formation of oxygenated intermediates. Overall, the present work details the synthesis of a high-efficiency OER electrocatalyst and demonstrates the introduction of nonmetallic anionic groups as an excellent strategy to promote electrocatalytic activity in energy conversion technologies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Palladium Hydride on C2N to Boost Formate Oxidation

  • Wang, Xiang
  • Montaña-Mora, Guillem|||0000-0003-1208-6836
  • Han, Xu|||0000-0001-8319-8830
  • Yu, Jing|||0000-0002-7620-745X
  • Qi, Xueqiang|||0000-0003-4566-9552
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Liang, Zhifu
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Li, Junshan|||0000-0002-1482-1972
The lack of electrocatalysts for the formate oxidation reaction (FOR) hampers the deployment of direct formate fuel cells (DFFCs). To overcome this limitation, herein, we detail the production of palladium hydride particles supported on CN (PdH@CN) via a facile method. PdH@CN displays excellent FOR performance, reaching current densities up to 5.6 A·mg and stable cycling and chronoamperometric operation. The Pd lattice expands due to the hydrogen intercalation. Besides, an electronic redistribution associated with the distinct electronegativity of Pd and H is observed. Both phenomena modify the electron energy levels, enhancing the activity and stability of the composite catalyst. More specifically, differential functional theory calculations show H intercalation to downshift the Pd d-band center in Pd@CN, weakening adsorbate binding and accelerating the FOR rate-determining step.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Thermoelectric Performance of Surface-Engineered Cu1.5-xTe-Cu2Se Nanocomposites

  • Xing, Congcong|||0000-0001-7674-6720
  • Zhang, Yu|||0000-0002-0332-0013
  • Xiao, Ke
  • Han, Xu|||0000-0001-8319-8830
  • Liu, Yu|||0000-0001-7313-6740
  • Nan, Bingfei|||0000-0002-7128-6056
  • Garcia Ramon, Maria|||0000-0003-1097-1639
  • Lim, Khak Ho|||0000-0003-3116-8589
  • Li, Junshan|||0000-0002-1482-1972
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Poudel, Bed|||0000-0001-7760-2016
  • Nozariasbmarz, Amin|||0000-0003-2789-9469
  • Li, Wenjie|||0000-0003-4509-3303
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
CuS and CuSe have recently been reported as promising thermoelectric (TE) materials for medium-temperature applications. In contrast, CuTe, another member of the copper chalcogenide family, typically exhibits low Seebeck coefficients that limit its potential to achieve a superior thermoelectric figure of merit, zT, particularly in the low-temperature range where this material could be effective. To address this, we investigated the TE performance of CuTe-CuSe nanocomposites by consolidating surface-engineered CuTe nanocrystals. This surface engineering strategy allows for precise adjustment of Cu/Te ratios and results in a reversible phase transition at around 600 K in CuTe-CuSe nanocomposites, as systematically confirmed by in situ high-temperature X-ray diffraction combined with differential scanning calorimetry analysis. The phase transition leads to a conversion from metallic-like to semiconducting-like TE properties. Additionally, a layer of CuSe generated around CuTe nanoparticles effectively inhibits CuTe grain growth, minimizing thermal conductivity and decreasing hole concentration. These properties indicate that copper telluride based compounds have a promising thermoelectric potential, translated into a high dimensionless zT of 1.3 at 560 K.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Combined Defect and Heterojunction Engineering in ZnTe/CoTe2@NC Sulfur Hosts Toward Robust Lithium-Sulfur Batteries

  • Huang, Chen
  • Yu, Jing|||0000-0002-7620-745X
  • Li, Canhuang
  • Cui, Zhibiao
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Zhang, Chao Yue
  • Nan, Bingfei|||0000-0002-7128-6056
  • Li, Junshan|||0000-0002-1482-1972
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Lithium-sulfur batteries (LSBs) are feasible candidates for the next generation of energy storage devices, but the shuttle effect of lithium polysulfides (LiPSs) and the poor electrical conductivity of sulfur and lithium sulfides limit their application. Herein, a sulfur host based on nitrogen-doped carbon (NC) coated with small amount of a transition metal telluride (TMT) catalyst is proposed to overcome these limitations. The properties of the sulfur redox catalyst are tuned by adjusting the anion vacancy concentration and engineering a ZnTe/CoTe2 heterostructures. Theoretical calculations and experimental data demonstrate that tellurium vacancies enhance the adsorption of LiPSs, while the formed TMT/TMT and TMT/C heterostructures as well as the overall architecture of the composite simultaneously provide high Li+ diffusion and fast electron transport. As a result, v-ZnTe/CoTe2atsignNC/S sulfur cathodes show excellent initial capacities up to 1608 mA h g-1 at 0.1C and stable cycling with an average capacity decay rate of 0.022% per cycle at 1C during 500 cycles. Even at a high sulfur loading of 5.4 mg cm-2, a high capacity of 1273 mA h g-1 at 0.1C is retained, and when reducing the electrolyte to 7.5 µL mg-1, v-ZnTe/CoTe2@NC/S still maintains a capacity of 890.8 mA h g-1 after 100 cycles at 0.1C.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Promoting Polysulfide Redox Reactions through Electronic Spin Manipulation

  • Yu, Jing|||0000-0002-7620-745X
  • Huang, Chen
  • Usoltsev, Oleg|||0000-0002-1537-3497
  • Black Serra, Ashley Phillip|||0000-0001-7929-5144
  • Gupta, Kapil|||0000-0002-4826-6620
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Pinto-Huguet, Ivan
  • Botifoll, Marc|||0000-0002-4876-6393
  • Li, Canhuang
  • Herrero-Martín, Javier|||0000-0003-1986-8128
  • Zhou, Jin Yuan
  • Ponrouch, Alexandre|||0000-0002-8232-6324
  • Zhao, Ruirui|||0000-0002-6016-5275
  • Balcells i Argemí, Lluís|||0000-0001-6603-7357
  • Zhang, Chao Yue
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Catalytic additives able to accelerate the lithium-sulfur redox reaction are a key component of sulfur cathodes in lithium-sulfur batteries (LSBs). Their design focuses on optimizing the charge distribution within the energy spectra, which involves refinement of the distribution and occupancy of the electronic density of states. Herein, beyond charge distribution, we explore the role of the electronic spin configuration on the polysulfide adsorption properties and catalytic activity of the additive. We showcase the importance of this electronic parameter by generating spin polarization through a defect engineering approach based on the introduction of Co vacancies on the surface of CoSe nanosheets. We show vacancies change the electron spin state distribution, increasing the number of unpaired electrons with aligned spins. This local electronic rearrangement enhances the polysulfide adsorption, reducing the activation energy of the Li-S redox reactions. As a result, more uniform nucleation and growth of LiS and an accelerated liquid-solid conversion in LSB cathodes are obtained. These translate into LSB cathodes exhibiting capacities up to 1089 mA h g at 1 C with 0.017% average capacity loss after 1500 cycles, and up to 5.2 mA h cm, with 0.16% decay per cycle after 200 cycles in high sulfur loading cells.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhancing the Thermoelectric and Mechanical Properties of p-Type PbS through Band Convergence and Microstructure Regulation

  • Li, Mengyao|||0000-0002-9082-7938
  • Zhao, Xueke
  • Wang, Dongyang|||0000-0001-8149-7394
  • Han, Xu|||0000-0001-8319-8830
  • Yang, Dawei|||0000-0002-3842-8286
  • Wu, Benteng
  • Song, Hongzhang|||0000-0001-9665-9747
  • Jia, Mochen|||0000-0003-4709-6233
  • Liu, Yu|||0000-0001-7313-6740
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
While lead sulfide shows notable thermoelectric properties, its production costs remain high, and its mechanical hardness is low, which constrains its commercial viability. Herein, we demonstrate a straightforward and cost-effective method to produce PbS nanocrystals at ambient temperature. By introducing controlled amounts of silver, we achieve p-type conductivity and fine-tune the energy band structure and lattice configuration. Computational results show that silver shifts the Fermi level into the valence band, facilitating band convergence and thereby enhancing the power factor. Besides, excess silver is present as silver sulfide, which effectively diminishes the interface barrier and enhances the Seebeck coefficient. Defects caused by doping, along with dislocations and interfaces, reduce thermal conductivity to 0.49 W m-1 K-1 at 690 K. Moreover, the alterations in crystal structure and chemical composition enhance the PbS mechanical properties. Overall, optimized materials show thermoelectric figures of merit approximately 10-fold higher than that of pristine PbS, alongside an average hardness of 1.08 GPa.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Colloidal Ni–Co–Sn nanoparticles as efficient electrocatalysts for the methanol oxidation reaction

  • Li, Junshan
  • Luo, ZhiShan
  • He, Feng
  • Zuo, Yong
  • Zhang, Chaoqi
  • Liu, Junfeng
  • Yu, Xiaoting
  • Du, Ruifeng
  • Zhang, Ting
  • Infante-Carrió, Maria F.
  • Tang, Peng-Yi
  • Arbiol, Jordi
  • Llorca, Jordi
  • Cabot, Andreu
The deployment of direct methanol fuel cells requires engineering cost-effective and durable electrocatalysts for the methanol oxidation reaction (MOR). As an alternative to noble metals, Ni-based alloys have shown excellent performance and good stability toward the MOR. Herein, we present a series of Ni3−xCoxSn2 colloidal nanoparticles (NPs) with composition tuned over the entire Ni/Co range (0 ≤ x ≤ 3). We demonstrate electrodes based on these ternary NPs to provide improved catalytic performance toward the MOR in an alkaline medium when compared with binary Ni3Sn2 NPs. A preliminary composition optimization resulted in Ni2.5Co0.5Sn2 NP-based electrodes exhibiting extraordinary mass current densities, up to 1050 mA mg−1, at 0.6 V vs. Hg/HgO in 1.0 M KOH containing 1.0 M methanol. This current density was about two-fold higher than that of Ni3Sn2 electrodes (563 mA mg−1). The excellent performance obtained with the substitution of small amounts of Ni by Co was concomitant with an increase of the surface coverage of active species and an enhancement of the diffusivity of the reaction limiting species. Additionally, saturation of the catalytic activity at higher methanol concentrations was measured for Ni3−xCoxSn2 NP-based electrodes containing a small amount of Co when compared with binary Ni3Sn2 NPs. While the electrode stability was improved with respect to elemental Ni NP-based electrodes, the introduction of small amounts of Co slightly decreased the cycling performance. Additionally, Sn, a key element to improve stability with respect to elemental Ni NPs, was observed to slowly dissolve in the presence of KOH. Density functional theory calculations on metal alloy surfaces showed the incorporation of Co within the Ni3Sn2 structure to provide more effective sites for CO and CH3OH adsorption. However, the relatively lower stability could not be related to CO or CH3OH poisoning., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R) and VALPEC (ENE2017-85087-C3). J. Li and T. Zhang thank the China Scholarship Council (CSC) for scholarship support. T. Zhang and J. Arbiol acknowledge funding from Generalitat de Catalunya 2017 SGR 327. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV-2013-0295). IREC and ICN2 are funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of the Universitat Autònoma de Barcelona Materials Science PhD program. J. Llorca is a Serra Húnter Fellow and is grateful to the ICREA Academia program and to MINECO/FEDER grant ENE2015-63969-R and GC 2017 SGR 128., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Triphenyl phosphite as the phosphorus source for the scalable and cost-effective production of transition metal phosphides

  • Liu, Junfeng
  • Meyns, Michaela
  • Zhang, Ting
  • Arbiol, Jordi
  • Cabot, Andreu
  • Shavel, Alexey
Transition metal phosphides have great potential to optimize a number of functionalities in several energy conversion and storage applications, particularly when nanostructured or in nanoparticle form. However, the synthesis of transition metal phosphide nanoparticles and its scalability is often limited by the toxicity, air sensitivity, and high cost of the reagents used. We present here a simple, scalable, and cost-effective “heating up” procedure to produce metal phosphides using inexpensive, low-toxicity, and air-stable triphenyl phosphite as source of phosphorus and chlorides as metal precursors. This procedure allows the synthesis of a variety of phosphide nanoparticles, including phosphides of Ni, Co, and Cu. The use of carbonyl metal precursors further allowed the synthesis of Fe2P and MoP nanoparticles. The fact that minor modifications in the experimental parameters allowed producing nanoparticles with different compositions and even to tune their size and shape shows the high potential and versatility of the triphenyl phosphite precursor and the presented method. We also detail here a methodology to displace organic ligands from the surface of phosphide nanoparticles, which is a key step toward their application in energy conversion and storage systems., This work was supported by the European Regional Development Funds and the Spanish Ministerio de Economia y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R). J.L. thanks the China Scholarship Council for scholarship support. M.M. thanks the Spanish MINECO for her Juan de la Cierva scholarship. T.Z. and J.A. acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO coordinated project ANAPHASE (ENE2017-85087-C3-3-R). ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV2013-0295) and is funded by the CERCA Programme/ Generalitat de Catalunya. T.Z. has received funding from the CSC-UAB PhD scholarship program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Compositionally tuned NixSn alloys as anode materials for lithium-ion and sodium-ion batteries with a high pseudocapacitive contribution

  • Li, Junshan
  • Xu, Xijun
  • Luo, ZhiShan
  • Zhang, Chaoqi
  • Yu, Xiaoting
  • Zuo, Yong
  • Zhang, Ting
  • Tang, Peng-Yi
  • Arbiol, Jordi
  • Llorca, Jordi
  • Liu, Jun
  • Cabot, Andreu
Nickel tin alloy nanoparticles (NPs) with tuned composition NixSn (0.6 ≤ x ≤ 1.9) were synthesized by a solution-based procedure and used as anode materials for Li-ion batteries (LIBs) and Na-ion batteries (SIBs). Among the compositions tested, Ni0.9Sn-based electrodes exhibited the best performance in both LIBs and SIBs. As LIB anodes, Ni0.9Sn-based electrodes delivered charge-discharge capacities of 980 mAh g−1 after 340 cycles at 0.2 A g−1 rate, which surpassed their maximum theoretical capacity considering that only Sn is lithiated. A kinetic characterization of the charge-discharge process demonstrated the electrode performance to be aided by a significant pseudocapacitive contribution that compensated for the loss of energy storage capacity associated to the solid-electrolyte interphase formation. This significant pseudocapacitive contribution, which not only translated into higher capacities but also longer durability, was associated to the small size of the crystal domains and the proper electrode composition. The performance of NixSn-based electrodes toward Na-ion storage was also characterized, reaching significant capacities above 200 mAh g−1 at 0.1 A g−1 but with a relatively fast fade over 120 continuous cycles. A relatively larger pseudocapacitive contribution was obtained in NixSn-based electrodes for SIBs when compared with LIBs, consistently with the lower contribution of the Na ion diffusion associated to its larger size., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R). J. Li thanks the China Scholarship Council for scholarship support. This project was supported by the National Natural Science Foundation of China (no. 51771076), the “1000 plan” from Chinese Government, and the Project of Public Interest Research and Capacity Building of Guangdong Province (no. 2017A010104004). T. Zhang, P. Tang and J. Arbiol acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO coordinated projects between IREC and ICN2 VALPEC and subprojects RESOL and ANAPHASE (ENE2017-85087-C3). ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV-2013-0295) and is funded by the CERCA Programme / Generalitat de Catalunya. T. Zhang has received funding from the CSC-UAB PhD scholarship program. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. J. Llorca is a Serra Húnter Fellow and is grateful to ICREA Academia program and to MINECO/FEDER grant ENE2015-63969-R and GC 2017 SGR 128., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Co–Sn nanocrystalline solid solutions as anode materials in lithium-ion batteries with high pseudocapacitive contribution

  • Li, Junshan
  • Xu, Xijun
  • Luo, ZhiShan
  • Zhang, Chaoqi
  • Zuo, Yong
  • Zhang, Ting
  • Tang, Peng-Yi
  • Infante-Carrió, Maria F.
  • Arbiol, Jordi
  • Llorca, Jordi
  • Liu, Jun
  • Cabot, Andreu
Co–Sn solid‐solution nanoparticles with Sn crystal structure and tuned metal ratios were synthesized by a facile one pot solution‐based procedure involving the initial reduction of a Sn precursor followed by incorporation of Co within the Sn lattice. These nanoparticles were used as anode materials for Li‐ion batteries. Among the different compositions tested, Co0.7Sn and Co0.9Sn electrodes provided the highest capacities with values above 1500 mAh g−1 at a current density of 0.2 A g−1 after 220 cycles, and up to 800 mAh g−1 at 1.0 A g−1 after 400 cycles. Up to 81 % pseudocapacitance contribution was measured for these electrodes at a sweep rate of 1.0 mV s−1, thereby indicating fast kinetics and long durability. The excellent performance of Co–Sn nanoparticle alloy‐based electrodes was attributed to both the small size of the crystal domains and their suitable composition, which buffered volume changes of Sn and contributed to a suitable electrode restructuration., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016‐77798‐C4‐3‐R). J. Li thanks the China Scholarship Council for scholarship support. This project was supported by the National Natural Science Foundation of China (no. 51771076), the “1000 plan” from Chinese Government, and the Project of Public Interest Research and Capacity Building of Guangdong Province (no. 2017A010104004). TZ, PYT, MFIC and JA acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO coordinated projects between IREC and ICN2 VALPEC and subprojects RESOL and ANAPHASE (ENE2017‐85087‐C3). ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV‐2013‐0295) and is funded by the CERCA Programme/ Generalitat de Catalunya. JL is a Serra Húnter Fellow and is grateful to ICREA Academia program and to MINECO/FEDER grant ENE2015‐63969‐R. TZ has received funding from the CSC‐UAB PhD scholarship program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chromium phosphide CrP as highly active and stable electrocatalysts for oxygen electroreduction in alkaline media

  • Liu, Junfeng
  • Yu, Xiaoting
  • Du, Ruifeng
  • Zhang, Chaoqi
  • Zhang, Ting
  • Llorca, Jordi
  • Arbiol, Jordi
  • Wang, Ying
  • Meyns, Michaela
  • Cabot, Andreu
Catalysts for oxygen reduction reaction (ORR) are key components in emerging energy technologies such as fuel cells and metal-air batteries. Developing low-cost, high performance and stable electrocatalysts is critical for the extensive implementation of these technologies. Herein, we present a procedure to prepare colloidal chromium phosphide CrP nanocrystals and we test their performance as ORR electrocatalyst. CrP-based catalysts exhibited remarkable activities with a limiting current density of 4.94 mA cm−2 at 0.2 V, a half-potential of 0.65 V and an onset potential of 0.8 V at 1600 rpm, which are comparable to commercial Pt/C. Advantageously, CrP-based catalysts displayed much higher stabilities and higher tolerances to methanol in alkaline solution. Using density functional theory calculations, we demonstrate CrP to provide a very strong chemisorption of O2 that facilitates its reduction and explains the excellent ORR performance experimentally demonstrated., This work was supported by the European Regional Development Funds and the Spanish MINECO project SEHTOP (ENE2016-77798-C4- 3-R). T. Zhang and J. Arbiol acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (SEV-2017-0706) and is funded by the CERCA Programme / Generalitat de Catalunya. J. Llorca is a Serra Hunter Fellow and is grateful to ICREA Academia program and grants MINECO/FEDER ENE2015-63969-R and GC 2017 SGR 128. J. Liu, X. Yu, R. Du, C. Zhang and T. Zhang thank the China Scholarship Council for scholarship support. M. Meyns acknowledges a Juan de la Cierva formación grant by theSpanish MINECO. Y. Wang thanks the National Natural Science Foundation of China for financial support (Grant Nos: 21673220, 21831003, 21733004), National Key Research and Development Program of China (2016YFA0602900) and High performance Computing Center of Jilin Province and Computing Center of Jilin University for essential support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combined high catalytic activity and efficient polar tubular nanostructure in urchin‐like metallic NiCo2Se4 for high‐performance lithium–sulfur batteries

  • Zhang, Chaoqi
  • Jacas Biendicho, Jordi
  • Zhang, Ting
  • Du, Ruifeng
  • Li, Junshan
  • Yang, Xuhui
  • Arbiol, Jordi
  • Zhou, Yingtang
  • Morante, Joan Ramón
  • Cabot, Andreu
Urchin‐shaped NiCo2Se4 (u‐NCSe) nanostructures as efficient sulfur hosts are synthesized to overcome the limitations of lithium–sulfur batteries (LSBs). u‐NCSe provides a beneficial hollow structure to relieve volumetric expansion, a superior electrical conductivity to improve electron transfer, a high polarity to promote absorption of lithium polysulfides (LiPS), and outstanding electrocatalytic activity to accelerate LiPS conversion kinetics. Owing to these excellent qualities as cathode for LSBs, S@u‐NCSe delivers outstanding initial capacities up to 1403 mAh g−1 at 0.1 C and retains 626 mAh g−1 at 5 C with exceptional rate performance. More significantly, a very low capacity decay rate of only 0.016% per cycle is obtained after 2000 cycles at 3 C. Even at high sulfur loading (3.2 mg cm−2), a reversible capacity of 557 mAh g−1 is delivered after 600 cycles at 1 C. Density functional theory calculations further confirm the strong interaction between NCSe and LiPS, and cytotoxicity measurements prove the biocompatibility of NCSe. This work not only demonstrates that transition metal selenides can be promising candidates as sulfur host materials, but also provides a strategy for the rational design and the development of LSBs with long‐life and high‐rate electrochemical performance., This work corresponds to an extension of activities initially performed around the objectives defined by the Helis project which received funding from the European Union's Horizon 2020 program under the Grant Agreement No. 666221. The authors acknowledge funding from Generalitat de Catalunya2017 SGR 1246 and 2017 SGR 327, the Spanish MINECO projects ENE2016‐77798‐C4‐3‐R and ENE2017‐85087‐C3, and the Zhou Shan Science and Technology Project (2018C21010). C. Zhang and T. Zhang thank the China Scholarship Council (CSC) for scholarship support. IREC acknowledges funding from European Regional Development Funds (ERDF‐FEDER Programa Competitivitat de Catalunya 2007–2013). ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV‐2017‐0706) and was funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene-supported palladium phosphide PdP2 nanocrystals for ethanol electrooxidation

  • Liu, Junfeng
  • Luo, ZhiShan
  • Li, Junshan
  • Yu, Xiaoting
  • Llorca, Jordi
  • Nasiou, Déspina
  • Arbiol, Jordi
  • Meyns, Michaela
  • Cabot, Andreu
We present a procedure to produce single-phase PdP2 nanocrystals (NCs). The approach involves the reaction of palladium(II) acetylacetonate and hexamethylphosphoroustriamide to nucleate defective Pd5P2 nanoparticles that subsequently, with further phosphorous incorporation, crystallize into PdP2. The synthesized PdP2 NCs were supported on reduced graphene oxide (rGO) and applied as electrocatalysts for ethanol oxidation. The activity of PdP2 toward the ethanol oxidation reaction (EOR) was over a threefold higher than that of Pd NCs prepared under similar conditions. Even better performance was obtained from PdP2 NCs supported on rGO, which showed current densities up to 51.4 mA cm−2 and mass activities of 1.60 A mg-1Pd, that is 4.8 and 15 times higher than Pd NCs. Besides, PdP2 NCs and PdP2/rGO catalysts showed improved stability during EOR than Pd NCs and Pd/rGO., This work was supported by the European Regional Development Funds and the Spanish MINECO project SEHTOP (ENE2016-77798-C4-3-R). D. Nasiou and J. Arbiol acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ANAPHASE (ENE2017-85087-C3). ICN2 acknowledges support from the Severo Ochoa Programme (SEV-2013-0295) and is funded by the CERCA Programme / Generalitat de Catalunya. J. Llorca is a Serra Hunter Fellow and is grateful to ICREA Academia program and grants MINECO/FEDER ENE2015-63969-R and GC 2017 SGR 128. J. Liu, J. Li and X. Yu thank the China Scholarship Council for scholarship support. M. Meyns acknowledges a Juan de la Cierva formación grant by the Spanish MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In situ electrochemical oxidation of Cu2S into CuO nanowires as a durable and efficient electrocatalyst for oxygen evolution reaction

  • Zuo, Yong
  • Liu, Yongpeng
  • Li, Junshan
  • Du, Ruifeng
  • Zhang, Ting
  • Arbiol, Jordi
  • Divins, Núria J.
  • Llorca, Jordi
  • Guijarro, Néstor
  • Sivula, Kevin
  • Cabot, Andreu
Development of cost-effective oxygen evolution catalysts is of capital importance for the deployment of large-scale energy-storage systems based on metal–air batteries and reversible fuel cells. In this direction, a wide range of materials have been explored, especially under more favorable alkaline conditions, and several metal chalcogenides have particularly demonstrated excellent performances. However, chalcogenides are thermodynamically less stable than the corresponding oxides and hydroxides under oxidizing potentials in alkaline media. Although this instability in some cases has prevented the application of chalcogenides as oxygen evolution catalysts and it has been disregarded in some others, we propose to use it in our favor to produce high-performance oxygen evolution catalysts. We characterize here the in situ chemical, structural, and morphological transformation during the oxygen evolution reaction (OER) in alkaline media of Cu2S into CuO nanowires, mediating the intermediate formation of Cu(OH)2. We also test their OER activity and stability under OER operation in alkaline media and compare them with the OER performance of Cu(OH)2 and CuO nanostructures directly grown on the surface of a copper mesh. We demonstrate here that CuO produced from in situ electrochemical oxidation of Cu2S displays an extraordinary electrocatalytic performance toward OER, well above that of CuO and Cu(OH)2 synthesized without this transformation., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R). Y.Z., Junshan Li, R.D., X.H., and T.Z. thank the China Scholarship Council for the scholarship support. Y.L. and N.G. thank the Swiss National Science Foundation (SNF) for funding under the Ambizione Energy grant no. PZENP2_166871. Jordi Llorca is a Serra Hunter Fellow and is grateful to ICREA Academia program and to GC 2017 SGR 128. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Porous NiTiO3/TiO2 nanostructures for photocatatalytic hydrogen evolution

  • Xing, Congcong
  • Liu, Yongpeng
  • Zhang, Yu
  • Liu, Junfeng
  • Zhang, Ting
  • Tang, Peng-Yi
  • Arbiol, Jordi
  • Soler, Lluís
  • Sivula, Kevin
  • Guijarro, Néstor
  • Wang, Xiang
  • Li, Junshan
  • Du, Ruifeng
  • Zuo, Yong
  • Cabot, Andreu
  • Llorca, Jordi
We present a strategy to produce porous NiTiO3/TiO2 nanostructures with excellent photocatalytic activity toward hydrogen generation. In a first step, nickel-doped TiO2 needle bundles were synthesized by a hydrothermal procedure. Through the sintering in air of these nanostructures, porous NiTiO3/TiO2 heterostructured rods were obtained. Alternatively, the annealing in argon of the nickel-doped TiO2 needle bundles resulted in NiOx/TiO2 elongated nanostructures. Porous NiTiO3/TiO2 structures were tested for hydrogen evolution in the presence of ethanol. Such porous heterostructures exhibited superior photocatalytic activity toward hydrogen generation, with hydrogen production rates up to 11.5 mmol h−1 g−1 at room temperature. This excellent performance is related here to the optoelectronic properties and geometric parameters of the material., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through projects ENE2016-77798-C4-3-R and ENE2015-63969-R. Y. L. and N. G. thank the Swiss National Science Foundation (SNF) for funding under the Ambizione Energy grant no. PZENP2_166871. J.L. is a Serra Hunter fellow and is grateful to ICREA Academia program and GC 2017 SGR 128. T. Z., P.·Y. T. and J. A. acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV-2013-0295) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. C. C. X., Y. Z and T. Z. thank the China Scholarship Council for scholarship support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solution-processed ultrathin SnS2−Pt nanoplates for photoelectrochemical water oxidation

  • Zuo, Yong
  • Liu, Yongpeng
  • Li, Junshan
  • Du, Ruifeng
  • Yu, Xiaoting
  • Xing, Congcong
  • Zhang, Ting
  • Yao, Liang
  • Arbiol, Jordi
  • Llorca, Jordi
  • Sivula, Kevin
  • Guijarro, Néstor
  • Cabot, Andreu
Tin disulfide (SnS2) is attracting significant interest because of the abundance of its elements and its excellent optoelectronic properties in part related to its layered structure. In this work, we specify the preparation of ultrathin SnS2 nanoplates (NPLs) through a hot-injection solution-based process. Subsequently, Pt was grown on their surface via in situ reduction of a Pt salt. The photoelectrochemical (PEC) performance of such nanoheterostructures as photoanode toward water oxidation was tested afterwards. Optimized SnS2–Pt photoanodes provided significantly higher photocurrent densities than bare SnS2 and SnS2-based photoanodes of previously reported study. Mott–Schottky analysis and PEC impedance spectroscopy (PEIS) were used to analyze in more detail the effect of Pt on the PEC performance. From these analyses, we attribute the enhanced activity of SnS2–Pt photoanodes reported here to a combination of the very thin SnS2 NPLs and the proper electronic contact between Pt nanoparticles (NPs) and SnS2., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R) and VALPEC (ENE2017-85087-C3). Y.Z., J.L., R.D., X.T., and T.Z. thank China Scholarship Council for scholarship support. Y.L. and N.G. thank the Swiss National Science Foundation (SNF) for funding under the Ambizione Energy grant no. PZENP2_166871. J.L. is a Serra Húnter Fellow and is grateful to ICREA Academia program and grants MINECO/FEDER ENE2015-63969-R and GC 2017 SGR 128. T.Z. and J.A. acknowledge funding from Generalitat de Catalunya 2017 SGR 327. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, grant no. SEV-2013-0295). IREC and ICN2 are funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Upscaling high activity oxygen evolution catalysts based on CoFe2O4 nanoparticles supported on nickel foam for power-to-gas electrochemical conversion with energy efficiencies above 80%

  • Urbain, Félix
  • Du, Ruifeng
  • Tang, Peng-Yi
  • Smirnov, Vladimir
  • Andreu, Teresa
  • Finger, Friedhelm
  • Divins, Núria J.
  • Llorca, Jordi
  • Arbiol, Jordi
  • Cabot, Andreu
  • Morante, Joan Ramón
We investigate cobalt ferrite nanoparticles (NPs) supported on large-scale electrodes as oxygen evolution reaction (OER) catalysts. Colloidal CoFe2O4 NPs were loaded on low-cost and high surface area nickel foam (NF) scaffolds. The coating process was optimized for large electrode areas, ensuring a proper distribution of the NPs on the NF that allowed overcoming the electrical conductivity limitations of oxide NPs. We were able to produce CoFe2O4-coated NFs having 10 cm2 geometric surface areas with overpotentials below 300 mV for the OER at a current density of 50 mA/cm2. Such impressively low overpotentials suggested using CoFe2O4 NP-based electrodes within a water electrolysis device. In this prototype device, stable operating currents up to 500 mA at remarkably low cell-voltages of 1.62 and 1.53 V, at ambient and 50 °C electrolyte temperatures, respectively, were reached during operation periods of up to 50 h. The high electrochemical energy efficiencies reached at 50 mA/cm2, 75% and 81% respectively, rendered these devices particularly appealing to be combined with low-cost photovoltaic systems for bias-free hydrogen production. Therefore, CoFe2O4 NP-based electrolysers were coupled to low-cost thin-film silicon solar cells with 13% efficiency to complete a system that afforded solar-to-fuel efficiencies above 10%., Authors acknowledge funding from Generalitat de Catalunya through the CERCA program, 2017 SGR 1246, 2017 SGR 327 and the Spanish MINECO projects MAT2014-59961, ENE2016-80788-C5-5-R, ENE2016-77798-C4-3-R and ENE2017-85087, together with the support from Repsol S. A. Likewise, the authors thank Enagás S.A. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). IREC also acknowledges additional support from the European Regional Development Funds (ERDF, FEDER), (S)TEM part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program and the rest in the Nanoscience program of the University of Barcelona. The authors thank S. Moll (IEK-5), M. Biset-Peiró (IREC), and H. Xie (IREC) for their contribution to this work. F.U. acknowledges financial support from MINECO through Juan de la Cierva fellowship (FJCI-2016-29147).V.S. and F.F. (authors from IEK-5) thank the Deutsche Forschungsgemeinschaft (DFG) (Priority Program SPP 1613). J. Llorca is a Serra Húnter Fellow and is grateful to ICREA Academia program and funding from Generalitat de Catalunya 2017 SGR 128., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Superior methanol electrooxidation performance of (110)-faceted nickel polyhedral nanocrystals

  • Li, Junshan
  • Zuo, Yong
  • Liu, Junfeng
  • Wang, Xiang
  • Yu, Xiaoting
  • Du, Ruifeng
  • Zhang, Ting
  • Infante-Carrió, Maria F.
  • Tang, Peng-Yi
  • Arbiol, Jordi
  • Llorca, Jordi
  • Luo, ZhiShan
  • Cabot, Andreu
We present the synthesis of (110)-faceted nickel polyhedral nanocrystals (NCs) and their characterization as electrocatalysts for the methanol oxidation reaction (MOR). Ni NCs were produced at 180 °C through the reduction in solution of a Ni salt. They were combined with carbon black and Nafion and deposited over glassy carbon to study their electrocatalytic properties. Electrodes based on (110)-faceted Ni NCs displayed a first order reaction with KOH in the concentration range from 0.1 M to 1.0 M. These electrodes were characterized by higher coverages of active species, but lower diffusion coefficients of the species limiting the reaction rate when compared with electrodes prepared from spherical Ni NCs. Overall, electrodes based on faceted Ni NCs displayed excellent performance with very high current densities, up to 61 mA cm−2, and unprecedented mass activities, up to 2 A mg−1, at 0.6 V vs. Hg/HgO in 1.0 M KOH containing 1.0 M methanol. These electrodes also displayed a notable stability. While they suffered an activity loss of ca. 30% during the first 10 000 s of operation, afterward activity stabilized at very high current densities, ∼35 mA cm−2, and mass activities, ∼1.2 A mg−1, with only a 0.5% decrease during operation from 20 000 to 30 000 s., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R) and VALPEC (ENE2017-85087-C3). J. Li and T. Zhang thank the China Scholarship Council (CSC) for scholarship support. T. Zhang and J. Arbiol acknowledge funding from Generalitat de Catalunya 2017 SGR 327. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV-2013-0295). IREC and ICN2 are funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. JL is a Serra Húnter Fellow and is grateful to ICREA Academia program and to Generalitat de Catalunya 2017 SGR 128., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Atomic atom distribution of Ruthenium dispersed on a 2D covalent organic framework for electrocatalytic hydrogen evolution reaction

  • Liang, Zhifu
  • Wang, Xiang
  • Cabot, Andreu
  • Arbiol, Jordi
Resumen del póster presentado al nanoGe Fall Meeting, celebrado en Berlín (Alemania) del 4 al 8 de noviembre de 2019., In recent years, Single-atom catalysis (SAC) has become one of the most research hot topics in heterogeneous catalysis. As it is known, both homogeneous and heterogeneous catalysts are important for the reactions used in chemical industry. In homogeneous catalysis, up to 100% of the atoms may remain active during reactions, while for the in the case of heterogeneous catalysts, only a small fraction of the metal atoms can be utilized due to the aggregation of the atoms when forming clusters. In this way, SACs have the benefits of homogeneous and heterogeneous catalysts. In our case, we will use a 2D covalent organic framework (COF), which is a π-conjugated microporous polymer with a high stability, designability and crystallinity. In addition, contains a high number of pyridinic nitrogen which will not only be used for anchoring the metal atoms, but also as an active site for the catalytic reaction. Here we propose a single atom ruthenium catalysts on a 2D COF for improved electrocatalytic hydrogen evolution reaction., This work was supported by the European Regional Development Fund and by the Spanish Ministerio de Ciencia, Innovación y Universidades through the project SEHTOP (ENE 2016-77798-C4-3-R). This poster is funded by FEDER/Ministerio de Ciencia, Innovación y Universidades – Agencia Estatal de Investigación (ENE2017-85087-C3-3-R). Z.Liang. are grateful for financial support from Severo Ochoa Fellowship SEV-2013-0295. W Xiang and D Yang. thanks the China Scholarship Council. ICN2 is supported by the Severo Ochoa programme funded by AEI (Grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Combined high catalytic activity and efficient polar tubular nanostructure in urchin-like metallic NiCo2Se4 for high-performance lithium–sulfur batteries

  • Zhang, Ting
  • Zhang, Chaoqi
  • Jacas Biendicho, Jordi
  • Yang, Xuhui
  • Zhou, Yingtang
  • Morante, Joan Ramón
  • Cabot, Andreu
  • Arbiol, Jordi
Resumen del póster presentado al nanoGe Fall Meeting, celebrado en Berlín (Alemania) del 4 al 8 de noviembre de 2019., To realize fast-growing field of electric vehicles, rechargeable lithium-sulfur batteries (LSBs) have recently emerged as one of the most exciting alternatives to lithium-ion batteries (LIBs) owing to their higher theoretical energy density, 6 times higher than LIBs and lower cost. However, a poor utilization of the active material involved by the electrical insulating character of sulfur and lithium sulfides and a rapid degradation during charge/discharge processes still limit their practical application. Therefore, in this work, an urchin-shaped NiCo2Se4 (u-NCSe) nanostructures as efficient sulfur hosts were synthesized to overcome the limitations of lithium-sulfur batteries (LSBs) using selenization of Ni0.33Co0.67(CO3)0.5OH precursor. The u-NCSe showed a hollow structure with different distribution of Ni, Co and Se, which was proved by electron energy loss spectroscopy (EELS). Meanwhile, the high-resolution transmission electron microscopy (HRTEM) images indicated that the NiCo2Se4 nanostructures had a good crystallinity, in agreement with the cubic phase of NiCo2Se4 (space group: C12/m1). Owing to the hollow structure that can relieve volumetric expansion, a superior electrical conductivity to improve electron transfer, a high polarity to promote absorption of lithium polysulfides (LiPS), and outstanding electrocatalytic activity to accelerate LiPS conversion kinetics, S@u-NCSe delivers outstanding initial capacities up to 1403 mAh/g at 0.1 C and retains 626 mAh/g at 5 C with exceptional rate performance. More significantly, a very low capacity decay rate of only 0.016% per cycle is obtained after 2000 cycles at 3 C. Even at high sulfur loading (3.2 mg/cm2), a reversible capacity of 557 mAh/g is delivered after 600 cycles at 1 C. Density functional theory calculations further confirm the strong interaction between NCSe and LiPS, and cytotoxicity measure-ments prove the biocompatibility of NCSe. This work not only demonstrates that transition metal selenides can be promising candidates as sulfur host materials, but also provides a strategy for the rational design and the development of LSBs with long-life and high-rate electrochemical performance., This work corresponds to an extension of activities initially performed around the objectives defined by the Helis project which received funding from the European Union’s Horizon 2020 program under the Grant Agreement No. 666221. The authors acknowledge funding from Generalitat de Catalunya2017 SGR 1246 and 2017 SGR 327, the Spanish MINECO projects ENE2016-77798-C4-3-R and ENE2017-85087-C3, and the Zhou Shan Science and Technology Project (2018C21010). C. Zhang and T. Zhang thank the China Scholarship Council (CSC) for scholarship support. IREC acknowledges funding from European Regional Development Funds (ERDF-FEDER Programa Competitivitat de Catalunya 2007–2013). ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and was funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. This poster is funded by FEDER/Ministerio de Ciencia, Innovación y Universidades – Agencia Estatal de Investigación (ENE2017-85087-C3-3-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bismuth telluride–copper telluride nanocomposites from heterostructured building blocks

  • Zhang, Yu
  • Liu, Yu
  • Calcabrini, Mariano
  • Xing, Congcong
  • Han, Xu
  • Arbiol, Jordi
  • Cadavid, Doris
  • Ibáñez, María
  • Cabot, Andreu
Appropriately designed nanocomposites allow improving the thermoelectric performance by several mechanisms, including phonon scattering, modulation doping and energy filtering, while additionally promoting better mechanical properties than those of crystalline materials. Here, a strategy for producing Bi2Te3–Cu2−xTe nanocomposites based on the consolidation of heterostructured nanoparticles is described and the thermoelectric properties of the obtained materials are investigated. We first detail a two-step solution-based process to produce Bi2Te3–Cu2−xTe heteronanostructures, based on the growth of Cu2−xTe nanocrystals on the surface of Bi2Te3 nanowires. We characterize the structural and chemical properties of the synthesized nanostructures and of the nanocomposites produced by hot-pressing the particles at moderate temperatures. Besides, the transport properties of the nanocomposites are investigated as a function of the amount of Cu introduced. Overall, the presence of Cu decreases the material thermal conductivity through promotion of phonon scattering, modulates the charge carrier concentration through electron spillover, and increases the Seebeck coefficient through filtering of charge carriers at energy barriers. These effects result in an improvement of over 50% of the thermoelectric figure of merit of Bi2Te3., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R). Y. Z. and X. H., thank the China Scholarship Council for scholarship support. M. C. has received funding from the European Union's Horizon 2020 Research and Innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 665385. M. I. acknowledges financial support from IST Austria. Y. L. acknowledges funding from the European Union's Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie grant agreement no. 754411. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phosphorous incorporation in Pd2Sn alloys for electrocatalytic ethanol oxidation

  • Yu, Xiaoting
  • Liu, Junfeng
  • Li, Junshan
  • Luo, ZhiShan
  • Zuo, Yong
  • Xing, Congcong
  • Llorca, Jordi
  • Nasiou, Déspina
  • Arbiol, Jordi
  • Pan, Kai
  • Kleinhanns, Tobias
  • Xie, Ying
  • Cabot, Andreu
Direct ethanol fuel cells (DEFCs) show a huge potential to power future electric vehicles and portable electronics, but their deployment is currently limited by the unavailability of proper electrocatalysis for the ethanol oxidation reaction (EOR). In this work, we engineer a new electrocatalyst by incorporating phosphorous into a palladium-tin alloy and demonstrate a significant performance improvement toward EOR. We first detail a synthetic method to produce Pd2Sn:P nanocrystals that incorporate 35% of phosphorus. These nanoparticles are supported on carbon black and tested for EOR. Pd2Sn:P/C catalysts exhibit mass current densities up to 5.03 A mgPd−1, well above those of Pd2Sn/C, PdP2/C and Pd/C reference catalysts. Furthermore, a twofold lower Tafel slope and a much longer durability are revealed for the Pd2Sn:P/C catalyst compared with Pd/C. The performance improvement is rationalized with the aid of density functional theory (DFT) calculations considering different phosphorous chemical environments. Depending on its oxidation state, surface phosphorus introduces sites with low energy OH− adsorption and/or strongly influences the electronic structure of palladium and tin to facilitate the oxidation of the acetyl to acetic acid, which is considered the EOR rate limiting step. DFT calculations also points out that the durability improvement of Pd2Sn:P/C catalyst is associated to the promotion of OH adsorption that accelerates the oxidation of intermediate poisoning COads, reactivating the catalyst surface., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP, ENE2016- 77798-C4-3-R, and ENE2017-85087-C3. X. Y. thanks the China Scholarship Council for the scholarship support. J. Liu acknowledges support from the Jiangsu University Foundation (4111510011). J. Li obtained International Postdoctoral Exchange Fellowship Program (Talent-Introduction program) in 2019 and is grateful for the project (2019M663468) funded by the China Postdoctoral Science Foundation. Authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246, and from IST Austria. ICN2 acknowledges the support from the Severo Ochoa Programme (MINECO, grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. J. Llorca is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128 and to ICREA Academia program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selective methanol‐to‐formate electrocatalytic conversion on branched nickel carbide

  • Li, Junshan
  • Wei, Ruilin
  • Zuo, Yong
  • Han, Xu
  • Arbiol, Jordi
  • Llorca, Jordi
  • Yang, Yaoyue
  • Cabot, Andreu
  • Cui, Chunhua
A methanol economy will be favored by the availability of low‐cost catalysts able to selectively oxidize methanol to formate. This selective oxidation would allow extraction of the largest part of the fuel energy while concurrently producing a chemical with even higher commercial value than the fuel itself. Herein, we present a highly active methanol electrooxidation catalyst based on abundant elements and with an optimized structure to simultaneously maximize interaction with the electrolyte and mobility of charge carriers. In situ infrared spectroscopy combined with nuclear magnetic resonance spectroscopy showed that branched nickel carbide particles are the first catalyst determined to have nearly 100 % electrochemical conversion of methanol to formate without generating detectable CO2 as a byproduct. Electrochemical kinetics analysis revealed the optimized reaction conditions and the electrode delivered excellent activities. This work provides a straightforward and cost‐efficient way for the conversion of organic small molecules and the first direct evidence of a selective formate reaction pathway., J. Li obtained an International Postdoctoral Exchange Fellowship Program (Talent‐Introduction program) in 2019 and is grateful for the project (2019M663468) funded by the China Postdoctoral Science Foundation. This work was supported from the UESTC start‐up funding and the Recruitment Program of Thousand Youth Talents. Y. Yang acknowledges the funding No.21603177 from NSFC. It was also supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016‐77798‐C4‐3‐R) and VALPEC (ENE2017‐85087‐C3). X. Wang, Y. Zuo, and X. Han thank the China Scholarship Council (CSC) for scholarship support. X. Han and J. Arbiol acknowledge funding from Generalitat de Catalunya 2017 SGR 327. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV‐2013‐0295). IREC and ICN2 are funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. J. Llorca is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018‐093996‐B‐C31, GC 2017 SGR 128 and to ICREA Academia program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

SnS2/g-C3N4/graphite nanocomposites as durable lithium-ion battery anode with high pseudocapacitance contribution

  • Zuo, Yong
  • Xu, Xijun
  • Zhang, Chaoqi
  • Li, Junshan
  • Du, Ruifeng
  • Wang, Xiang
  • Han, Xu
  • Arbiol, Jordi
  • Llorca, Jordi
  • Liu, Jun
  • Cabot, Andreu
Tin disulfide is a promising anode material for Li-ion batteries (LIB) owing to its high theoretical capacity and the abundance of its composing elements. However, bare SnS2 suffers from low electrical conductivity and large volume expansion, which results in poor rate performance and cycling stability. Herein, we present a solution-based strategy to grow SnS2 nanostructures within a matrix of porous g-C3N4 (CN) and high electrical conductivity graphite plates (GPs). We test the resulting nanocomposite as anode in LIBs. First, SnS2 nanostructures with different geometries are tested, to find out that thin SnS2 nanoplates (SnS2-NPLs) provide the highest performances. Such SnS2-NPLs, incorporated into hierarchical SnS2/CN/GP nanocomposites, display excellent rate capabilities (536.5 mA h g−1 at 2.0 A g−1) and an outstanding stability (∼99.7% retention after 400 cycles), which are partially associated with a high pseudocapacitance contribution (88.8% at 1.0 mV s−1). The excellent electrochemical properties of these nanocomposites are ascribed to the synergy created between the three nanocomposite components: i) thin SnS2-NPLs provide a large surface for rapid Li-ion intercalation and a proper geometry to stand volume expansions during lithiation/delithiation cycles; ii) porous CN prevents SnS2-NPLs aggregation, habilitates efficient channels for Li-ion diffusion and buffer stresses associated to SnS2 volume changes; and iii) conductive GPs allow an efficient charge transport., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R). Y.Z. thanks China Scholarship Council for scholarship support (201606500001). This work was accomplished with the financial supported from the National Natural Science Foundation of China (no. 51771076) and (no. 51621001. the Foundation for Innovative Research Groups). Jun Liu acknowledges the support from Chinese Government the young “1000 plan”, and thanks the projects of Guangzhou Science and Technology Plan (no. 201804010104) and Guangdong Province Public Interest Research and Capacity Building (no. 2017A010104004). Jordi Llorca is a Serra Húnter Fellow and is grateful to ICREA Academia program and GC 2017 SGR 128. X.H. thanks China Scholarship Council for scholarship support (201804910551). ICN2 acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3-3-R. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme /Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tin selenide molecular precursor for the solution processing of thermoelectric materials and devices

  • Zhang, Yu
  • Xing, Congcong
  • Zhang, Ting
  • Li, Mengyao
  • Pacios, Merce
  • Yu, Xiaoting
  • Arbiol, Jordi
  • Llorca, Jordi
  • Cadavid, Doris
  • Ibáñez, María
  • Cabot, Andreu
In the present work, we report a solution-based strategy to produce crystallographically textured SnSe bulk nanomaterials and printed layers with optimized thermoelectric performance in the direction normal to the substrate. Our strategy is based on the formulation of a molecular precursor that can be continuously decomposed to produce a SnSe powder or printed into predefined patterns. The precursor formulation and decomposition conditions are optimized to produce pure phase 2D SnSe nanoplates. The printed layer and the bulk material obtained after hot press displays a clear preferential orientation of the crystallographic domains, resulting in an ultralow thermal conductivity of 0.55 W m–1 K–1 in the direction normal to the substrate. Such textured nanomaterials present highly anisotropic properties with the best thermoelectric performance in plane, i.e., in the directions parallel to the substrate, which coincide with the crystallographic bc plane of SnSe. This is an unfortunate characteristic because thermoelectric devices are designed to create/harvest temperature gradients in the direction normal to the substrate. We further demonstrate that this limitation can be overcome with the introduction of small amounts of tellurium in the precursor. The presence of tellurium allows one to reduce the band gap and increase both the charge carrier concentration and the mobility, especially the cross plane, with a minimal decrease of the Seebeck coefficient. These effects translate into record out of plane ZT values at 800 K., M.I. acknowledges financial support from IST Austria. Y.L. acknowledges funding from the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie grant agreement no. 754411. J.L. is a Serra Húnter Fellow and is grateful to ICREA Academia program and projects MICINN/FEDER RTI2018-093996-B-C31 and GC 2017 SGR 128. This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R). Y.Z., C.X., M.L., X.Y., and T.Z. thank the China Scholarship Council for scholarship support. ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. ICN2 is supported by the Severo Ochoa program from the Spanish MINECO (grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A SnS2 molecular precursor for conformal nanostructured coatings

  • Zuo, Yong
  • Li, Junshan
  • Yu, Xiaoting
  • Du, Ruifeng
  • Zhang, Ting
  • Wang, Xiang
  • Arbiol, Jordi
  • Llorca, Jordi
  • Cabot, Andreu
We present a simple, versatile, and scalable procedure to produce SnS2 nanostructured layers based on an amine/thiol-based molecular ink. The ratios amine/thiol and Sn/S, and the reaction conditions, are systematically investigated to produce phase-pure SnS2 planar and conformal layers with a tremella-like SnS2 morphology. Such nanostructured layers are characterized by excellent photocurrent densities. The same strategy can be used to produce SnS2–graphene composites by simply introducing graphene oxide (GO) into the initial solution. Conveniently, the solvent mixture is able to simultaneously dissolve the Sn and Se powders and reduce the GO. Furthermore, SnS2-xSex ternary coatings and phase-pure SnSe2 can be easily produced by simply incorporating proper amounts of Se into the initial ink formulation. Finally, the potential of this precursor ink to produce gram-scale amounts of unsupported SnS2 is investigated., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the projects SEHTOP, ENE2016-77798-C4-3-R, and ENE2017-85087-C3. Y.Z. thanks the China Scholarship Council for the scholarship support (no. 201606500001). The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. J. Llorca is a Serra Húnter Fellow and is grateful to ICREA Academia program and to MINECO/FEDER grant RTI2018-093996-B-C31 and GC 2017 SGR 128. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. T.Z. has received funding from the CSC-UAB PhD scholarship program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

ZnSe/N-doped carbon nanoreactor with multiple adsorption sites for stable lithium–sulfur batteries

  • Yang, Dawei
  • Zhang, Chaoqi
  • Jacas Biendicho, Jordi
  • Han, Hu
  • Liang, Zhifu
  • Du, Ruifeng
  • Li, Mengyao
  • Li, Junshan
  • Arbiol, Jordi
  • Llorca, Jordi
  • Zhou, Yingtang
  • Morante, Joan Ramón
  • Cabot, Andreu
To commercially realize the enormous potential of lithium–sulfur batteries (LSBs) several challenges remain to be overcome. At the cathode, the lithium polysulfide (LiPS) shuttle effect must be inhibited and the redox reaction kinetics need to be substantially promoted. In this direction, this work proposes a cathode material based on a transition-metal selenide (TMSe) as both adsorber and catalyst and a hollow nanoreactor architecture: ZnSe/N-doped hollow carbon (ZnSe/NHC). It is here demonstrated both experimentally and by means of density functional theory that this composite provides three key benefits to the LSBs cathode: (i) A highly effective trapping of LiPS due to the combination of sulfiphilic sites of ZnSe, lithiophilic sites of NHC, and the confinement effect of the cage-based structure; (ii) a redox kinetic improvement in part associated with the multiple adsorption sites that facilitate the Li+ diffusion; and (iii) an easier accommodation of the volume expansion preventing the cathode damage due to the hollow design. As a result, LSB cathodes based on S@ZnSe/NHC are characterized by high initial capacities, superior rate capability, and an excellent stability. Overall, this work not only demonstrates the large potential of TMSe as cathode materials in LSBs but also probes the nanoreactor design to be a highly suitable architecture to enhance cycle stability., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economíay Competitividad through the project SEHTOP, ENE2016-77798-C4-3-R, and ENE2017-85087-C3. D. Yang, C. Zhang, and X. Han thank the China Scholarship Council for the scholarship support. Z. Liang acknowledges funding from a MINECO SO FPI PhD grant (SEV-2013-0295-17-1). J. Li obtained an International Postdoctoral Exchange Fellowship (Talent-Introduction program) in 2019 and is grateful for the project (2019M663468) funded by the China Postdoctoral Science Foundation. The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 acknowledges the support from the Severo Ochoa Programme (MINECO, grant no. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. J. Llorca is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128, and to the ICREA Academia program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomically dispersed Fe in a C2N based catalyst as a sulfur host for efficient lithium–sulfur batteries

  • Liang, Zhifu
  • Yang, Dawei
  • Tang, Peng-Yi
  • Zhang, Chaoqi
  • Jacas Biendicho, Jordi
  • Zhang, Yi
  • Llorca, Jordi
  • Wang, Xiang
  • Li, Junshan
  • Heggen, Marc
  • David, Jeremy
  • Dunin-Borkowski, Rafal E.
  • Zhou, Yingtang
  • Morante, Joan Ramón
  • Cabot, Andreu
  • Arbiol, Jordi
Lithium–sulfur batteries (LSBs) are considered to be one of the most promising next generation energy storage systems due to their high energy density and low material cost. However, there are still some challenges for the commercialization of LSBs, such as the sluggish redox reaction kinetics and the shuttle effect of lithium polysulfides (LiPS). Here a 2D layered organic material, C2N, loaded with atomically dispersed iron as an effective sulfur host in LSBs is reported. X‐ray absorption fine spectroscopy and density functional theory calculations prove the structure of the atomically dispersed Fe/C2N catalyst. As a result, Fe/C2N‐based cathodes demonstrate significantly improved rate performance and long‐term cycling stability. Fe/C2N‐based cathodes display initial capacities up to 1540 mAh g−1 at 0.1 C and 678.7 mAh g−1 at 5 C, while retaining 496.5 mAh g−1 after 2600 cycles at 3 C with a decay rate as low as 0.013% per cycle. Even at a high sulfur loading of 3 mg cm−2, they deliver remarkable specific capacity retention of 587 mAh g−1 after 500 cycles at 1 C. This work provides a rational structural design strategy for the development of high‐performance cathodes based on atomically dispersed catalysts for LSBs., ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV‐2017‐0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. J.D. has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowka‐Curie grant agreement No 665919 (P‐SPHERE) co‐funded by Severo Ochoa Programme. Z.L. acknowledges funding from MINECO SO‐FPT PhD grant (SEV‐2013‐0295‐17‐1). This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 823717‐ESTEEM3. The present work is supported by the European Regional Development Funds and by the Spanish MINECO through the projects SEHTOP, ENE2016‐77798‐C4‐3‐R, and ENE2017‐85087‐C3. D.Y., X.W., and C.Z. thank the China Scholarship Council for the scholarship support. P.T. acknowledges Humboldt Research Fellowship for Postdoctoral Researchers sponsored by the Alexander von Humboldt Foundation. J.L. obtained International Postdoctoral Exchange Fellowship Program (Talent‐Introduction program) in 2019 and is grateful for the project (2019M663468) funded by the China Postdoctoral Science Foundation. Authors acknowledge funding from Generalitat de Catalunya 2017SGR327 and 2017SGR1246. J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018‐093996‐B‐C31, GC 2017 SGR 128 and to ICREA Academia program. The authors thank Jessica Padilla, Dr. Albert Llorente Mola, and Dr. Tariq Jawhari support in ICN2, IREC and UB, respectively for the help in additional analyses performed in the samples., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nickel iron diselenide for highly efficient and selective electrocatalytic conversion of methanol to formate

  • Li, Junshan
  • Xing, Congcong
  • Zhang, Yu
  • Spadaro, Maria Chiara
  • Wu, Qianbao
  • Yi, Yunan
  • He, Shenglan
  • Llorca, Jordi
  • Arbiol, Jordi
  • Cabot, Andreu
  • Cui, Chunhua
The electro-oxidation of methanol to formate is an interesting example of the potential use of renewable energies to add value to a biosourced chemical commodity. Additionally, methanol electro-oxidation can replace the sluggish oxygen evolution reaction when coupled to hydrogen evolution or to the electroreduction of other biomass-derived intermediates. But the cost-effective realization of these reaction schemes requires the development of efficient and low-cost electrocatalysts. Here, a noble metal-free catalyst, Ni1−xFexSe2 nanorods, with a high potential for an efficient and selective methanol conversion to formate is demonstrated. At its optimum composition, Ni0.75Fe0.25Se2, this diselenide is able to produce 0.47 mmol cm−2 h−1 of formate at 50 mA cm−2 with a Faradaic conversion efficiency of 99%. Additionally, this noble-metal-free catalyst is able to continuously work for over 50 000 s with a minimal loss of efficiency, delivering initial current densities above 50 mA cm−2 and 2.2 A mg−1 in a 1.0 m KOH electrolyte with 1.0 m methanol at 1.5 V versus reversible hydrogen electrode. This work demonstrates the highly efficient and selective methanol-to-formate conversion on Ni-based noble-metal-free catalysts, and more importantly it shows a very promising example to exploit the electrocatalytic conversion of biomass-derived chemicals., J.L. obtained International Postdoctoral Exchange Fellowship Program (Talent-Introduction program No. YJ20190126) in 2019 and is grateful for the project (2019M663468) funded by the China Postdoctoral Science Foundation. This work was supported from the UESTC start-up funding, the Recruitment Program of Thousand Youth Talents, and the Natural Science Foundation of China (22072013). It was also supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project SEHTOP (ENE2016-77798-C4-3-R) and VALPEC (ENE2017-85087-C3). C.X., Y.Z., and T.Z. are grateful for the China Scholarship Council (CSC) for scholarship support. T.Z., and J.A. acknowledge funding from Generalitat de Catalunya 2017 SGR 327. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV-2013-0295). T.Z. has received funding from the CSC-UAB PhD scholarship program. M.C.S. has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 754510 (PROBIST) and the Severo Ochoa programme. IREC and ICN2 are funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128 and to ICREA Academia program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular Engineering to Tune the Ligand Environment of Atomically Dispersed Nickel for Efficient Alcohol Electrochemical Oxidation

  • Liang, Zhifu
  • Jiang, Daochuan
  • Wang, Xiang
  • Shakouri, Mohsen
  • Zhang, Ting
  • Li, Zhongjun
  • Tang, Peng-Yi
  • Llorca, Jordi
  • Liu, Lijia
  • Yuan, Yupeng
  • Heggen, Marc
  • Dunin-Borkowski, Rafal E.
  • Morante, Joan Ramón
  • Cabot, Andreu
  • Arbiol, Jordi
Atomically dispersed metals maximize the number of catalytic sites and enhance their activity. However, their challenging synthesis and characterization strongly complicates their optimization. Here, the aim is to demonstrate that tuning the electronic environment of atomically dispersed metal catalysts through the modification of their edge coordination is an effective strategy to maximize their performance. This article focuses on optimizing nickel-based electrocatalysts toward alcohol electrooxidation in alkaline solution. A new organic framework with atomically dispersed nickel is first developed. The coordination environment of nickel within this framework is modified through the addition of carbonyl (CO) groups. The authors then demonstrate that such nickel-based organic frameworks, combined with carbon nanotubes, exhibit outstanding catalytic activity and durability toward the oxidation of methanol (CHOH), ethanol (CHCHOH), and benzyl alcohol (CHCHOH); the smaller molecule exhibits higher catalytic performance. These outstanding electrocatalytic activities for alcohol electrooxidation are attributed to the presence of the carbonyl group in the ligand chemical environment, which enhances the adsorption for alcohol, as revealed by density functional theory calculations. The work not only introduces a new atomically dispersed Ni-based catalyst, but also demonstrates a new strategy for designing and engineering high-performance catalysts through the tuning of their chemical environment., ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme /Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. Z.L. acknowledges funding from MINECO SO-FPT Ph.D. grant (SEV-2013-0295-17-1). This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 823717-ESTEEM3. The present work is supported by the European Regional Development Fund and by the Spanish MINECO through the projects ENE2016-77798-C4-3-R, ENE2017-85087-C3, and project NANOGEN (PID2020-116093RB-C43). X.W. and T.Z. thank the China Scholarship Council for the scholarship support. P. Tang acknowledges the Humboldt Research Fellowship. Authors acknowledge funding from Generalitat de Catalunya 2017SGR327 and 2017SGR1246. L.L. acknowledges the support from Natural Sciences and Engineering Research Council of Canada (NSERC, DG RGPIN-2020-06675). J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128, and to ICREA Academia program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

NbSe2 Meets C2N: A 2D-2D Heterostructure Catalysts as Multifunctional Polysulfide Mediator in Ultra-Long-Life Lithium–Sulfur Batteries

  • Yang, Dawei
  • Liang, Zhifu
  • Zhang, Chaoqi
  • Biendicho, Jordi Jacas
  • Botifoll, Marc
  • Spadaro, Maria Chiara
  • Chen, Qiulin
  • Li, Mengyao
  • Ramón, Alberto
  • Ostovari Moghaddam, Ahmad
  • Llorca, Jordi
  • Wang, Jiaao
  • Ramon Morante, Joan
  • Arbiol, Jordi
  • Chou, Shu-Lei
  • Cabot, Andreu
The shuttle effect and sluggish conversion kinetics of lithium polysulfides (LiPS) hamper the practical application of lithium–sulfur batteries (LSBs). Toward overcoming these limitations, herein an in situ grown CN@NbSe heterostructure is presented with remarkable specific surface area, as a Li–S catalyst and LiPS absorber. Density functional theory (DFT) calculations and experimental results comprehensively demonstrate that CN@NbSe is characterized by a suitable electronic structure and charge rearrangement that strongly accelerates the LiPS electrocatalytic conversion. In addition, heterostructured CN@NbSe strongly interacts with LiPS species, confining them at the cathode. As a result, LSBs cathodes based on CN@NbSe/S exhibit a high initial capacity of 1545 mAh g at 0.1 C. Even more excitingly, CN@NbSe/S cathodes are characterized by impressive cycling stability with only 0.012% capacity decay per cycle after 2000 cycles at 3 C. Even at a sulfur loading of 5.6 mg cm, a high areal capacity of 5.65 mAh cm is delivered. These results demonstrate that CN@NbSe heterostructures can act as multifunctional polysulfide mediators to chemically adsorb LiPS, accelerate Li-ion diffusion, chemically catalyze LiPS conversion, and lower the energy barrier for LiS precipitation/decomposition, realizing the “adsorption-diffusion-conversion” of polysulfides., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economíay Competitividad through the project SEHTOP, ENE2016- 77798-C4-3-R, and ENE2017-85087-C3. D.Y., C.Z. and M.L. thank the China Scholarship Council for the scholarship support (CSC 201806090276, CSC 201706650011 and CSC 201706890005, respectively). Z.L. acknowledges funding from MINECO SO FPI Ph.D. grant (SEV-2013-0295-17-1). The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 acknowledges the support from the Severo Ochoa Programme (MINECO, Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128, and to ICREA Academia program. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. M.C.S. has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No 754510 (PROBIST). M.B. acknowledges support from SUR Generalitat de Catalunya and the EU Social Fund; project ref. 2020 FI 00103.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tubular CoFeP@CN as a Mott–Schottky Catalyst with Multiple Adsorption Sites for Robust Lithium−Sulfur Batteries

  • Zhang, Chaoqi
  • Du, Ruifeng
  • Biendicho, Jordi Jacas
  • Yi, Mingjie
  • Xiao, Ke
  • Yang, Dawei
  • Zhang, Ting
  • Wang, Xiang
  • Arbiol, Jordi
  • Llorca, Jordi
  • Zhou, Yingtang
  • Morante, Joan Ramón
  • Cabot, Andreu
The shuttle effect and the sluggish reaction kinetics of lithium polysulfide (LiPS) seriously compromise the performance of lithium–sulfur batteries (LSBs). To overcome these limitations and enable the fabrication of robust LSBs, here the use of a Mott–Schottky catalyst based on bimetallic phosphide CoFeP nanocrystals supported on carbon nitride tubular nanostructures as sulfur hosts is proposed. Theoretical calculations and experimental data confirm that CoFeP@CN composites are characterized by a suitable electronic structure and charge rearrangement that allows them to act as a Mott–Schottky catalyst to accelerate LiPS conversion. In addition, the tubular geometry of CoFeP@CN composites facilitates the diffusion of Li ions, accommodates volume change during the reaction, and offers abundant lithiophilic/sulfiphilic sites to effectively trap soluble LiPS. Therefore, S@CoFeP@CN electrodes deliver a superior rate performance of 630 mAh g at 5 C, and remarkable cycling stability with 90.44% capacity retention over 700 cycles. Coin cells with high sulfur loading, 4.1 mg cm, and pouch cells with 0.1 Ah capacities are further produced to validate their superior cycling stability. In addition, it is demonstrated here that CoFeP@CN hosts greatly alleviate the often overlooked issues of low energy efficiency and serious self-discharging in LSBs., This work was supported by the European Regional Development Funds and by the Spanish Ministerio de Economía y Competitividad through the project ENE2016-77798-C4-3-R, and ENE2017-85087-C3. C.Q.Z., R.F.D., K.X., D.W.Y., T.Z., and X.W. thank the China Scholarship Council for the scholarship support. The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 acknowledges the support from the Severo Ochoa Programme (MINECO, grant no. SEV-2017-0706) and was funded by the CERCA Programme/Generalitat de Catalunya. J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128 and to ICREA Academia program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Activating the lattice oxygen oxidation mechanism in amorphous molybdenum cobalt oxide nanosheets for water oxidation

  • Wang, Xiang
  • Xing, Congcong
  • Liang, Zhifu
  • Guardia, Pablo
  • Han, Xu
  • Zuo, Yong
  • Li, Junshan
  • Cabot, Andreu
The cost-effective deployment of several key energy technologies, such as water electrolysis, CO2 electroreduction and metal-air batteries, relies on the design and engineering of cost-effective catalysts able to accelerate the sluggish kinetics of the oxygen evolution reaction (OER). Herein, we detail the synthesis, processing and performance of a cobalt oxide-based OER electrocatalyst with optimized composition, atomic arrangement and nano/microstructure. We demonstrate that doping the cobalt oxide with a higher electronegativity element such as molybdenum promotes the participation of lattice oxygen in the OER. Besides, the processing of the catalyst at moderate temperatures results in an amorphous material with extended compositional and atomic arrangement versatility. Additionally, the catalyst, which is produced through an ion etching assisted strategy using ZIF-67 as a template, displays a highly porous structure in the form of amorphous ultrathin MoCoxOy nanosheets that maximize interaction with the media and facilitate the transport of ions through the electrolyte. After optimizing the molybdenum concentration and structural parameters, the best MoCoxOy catalysts exhibited a low overpotential of 282 mV at 10 mA cm-2 with a reduced Tafel slope of 60.6 mV dec-1, and excellent stability with more than 60 h operation without significant activity decay., This work was supported by the European Regional Development Funds and by the Spanish MINECO through the projects ENE2016-77798-C4-3-R, and NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/. X. W., C. X., X. H. and R. D. thank the China Scholarship Council (CSC) for the scholarship support. Authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 acknowledges the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706) and is funded by the CERCA Programme/Generalitat de Catalunya. Z. L. acknowledges funding from MINECO SO-FPT PhD grant (SEV-2013-0295-17-1). J. L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128 and ICREA Academia program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced polysulfide conversion with highly conductive and electrocatalytic iodine-doped bismuth selenide nanosheets in lithium–sulfur batteries

  • Li, Mengyao
  • Yang, Dawei
  • Jacas Biendicho, Jordi
  • Han, Xu
  • Zhang, Chaoqi
  • Liu, Kun
  • Diao, Jiefeng
  • Li, Junshan
  • Wang, Jing
  • Heggen, Marc
  • Dunin-Borkowski, Rafal E.
  • Wang, Jiaao
  • Henkelman, Graeme
  • Morante, Joan Ramón
  • Arbiol, Jordi
  • Chou, Shu-Lei
  • Cabot, Andreu
The shuttling behavior and sluggish conversion kinetics of intermediate lithium polysulfides (LiPS) represent the main obstacles to the practical application of lithium–sulfur batteries (LSBs). Herein, an innovative sulfur host is proposed, based on an iodine-doped bismuth selenide (I-Bi2Se3), able to solve these limitations by immobilizing the LiPS and catalytically activating the redox conversion at the cathode. The synthesis of I-Bi2Se3 nanosheets is detailed here and their morphology, crystal structure, and composition are thoroughly. Density-functional theory and experimental tools are used to demonstrate that I-Bi2Se3 nanosheets are characterized by a proper composition and micro- and nano-structure to facilitate Li+ diffusion and fast electron transportation, and to provide numerous surface sites with strong LiPS adsorbability and extraordinary catalytic activity. Overall, I-Bi2Se3/S electrodes exhibit outstanding initial capacities up to 1500 mAh g−1 at 0.1 C and cycling stability over 1000 cycles, with an average capacity decay rate of only 0.012% per cycle at 1 C. Besides, at a sulfur loading of 5.2 mg cm−2, a high areal capacity of 5.70 mAh cm−2 at 0.1 C is obtained with an electrolyte/sulfur ratio of 12 µL mg−1. This work demonstrated that doping is an effective way to optimize the metal selenide catalysts in LSBs., The authors thank the support from the projects ENE2016-77798-C4-3-R and NANOGEN (PID2020-116093RB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. M.L., D.Y., X.H., and C.Z. thank the China Scholarship Council for the scholarship support. ICN2 acknowledges the support from the Severo Ochoa Programme (MINECO, grant no. SEV-2017-0706). IREC and ICN2 are both funded by the CERCA Program/Generalitat de Catalunya. This project has received funding from the European Union's Horizon 2020 research and innovation program under grant agreement No 823717-ESTEEM3., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sulfate-Decorated Amorphous-Crystalline Cobalt-Iron Oxide Nanosheets to Enhance O-O Coupling in the Oxygen Evolution Reaction

  • Wang, Xiang
  • Li, Junshan
  • Xue, Qian
  • Han, Xu
  • Xing, Congcong
  • Liang, Zhifu
  • Guardia, Pablo
  • Zuo, Yong
  • Du, Ruifeng
  • Balcells, Lluis
  • Arbiol, Jordi
  • Llorca, Jordi
  • Qi, Xueqiang
  • Cabot, Andreu
The electrochemical oxygen evolution reaction (OER) plays a fundamental role in several energy technologies, which performance and cost-effectiveness are in large part related to the used OER electrocatalyst. Herein, we detail the synthesis of cobalt-iron oxide nanosheets containing controlled amounts of well-anchored SO42- anionic groups (CoFexOy-SO4). We use a cobalt-based zeolitic imidazolate framework (ZIF-67) as the structural template and a cobalt source and Mohr's salt ((NH4)2Fe(SO4)2·6H2O) as the source of iron and sulfate. When combining the ZIF-67 with ammonium iron sulfate, the protons produced by the ammonium ion hydrolysis (NH4+ + H2O = NH3·H2O + H+) etch the ZIF-67, dissociating its polyhedron structure, and form porous assemblies of two-dimensional nanostructures through a diffusion-controlled process. At the same time, iron ions partially replace cobalt within the structure, and SO42- ions are anchored on the material surface by exchange with organic ligands. As a result, ultrathin CoFexOy-SO4 nanosheets are obtained. The proposed synthetic procedure enables controlling the amount of Fe and SO4 ions and analyzing the effect of each element on the electrocatalytic activity. The optimized CoFexOy-SO4 material displays outstanding OER activity with a 10 mA cm-2 overpotential of 268 mV, a Tafel slope of 46.5 mV dec-1, and excellent stability during 62 h. This excellent performance is correlated to the material's structural and chemical parameters. The assembled nanosheet structure is characterized by a large electrochemically active surface area, a high density of reaction sites, and fast electron transportation. Meanwhile, the introduction of iron increases the electrical conductivity of the catalysts and provides fast reaction sites with optimum bond energy and spin state for the adsorption of OER intermediates. The presence of sulfate ions at the catalyst surface modifies the electronic energy level of active sites, regulates the adsorption of intermediates to reduce the OER overpotential, and promotes the surface charge transfer, which accelerates the formation of oxygenated intermediates. Overall, the present work details the synthesis of a high-efficiency OER electrocatalyst and demonstrates the introduction of nonmetallic anionic groups as an excellent strategy to promote electrocatalytic activity in energy conversion technologies., The authors thank the support from the projects Combenergy (PID2019-105490RB-C32) from the Spanish Ministerio de Ciencia e Innovación, ENE2016-77798-C4-3-R and NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. The authors also thank the Spanish Ministry of Science and Innovation through the Severo Ochoa (CEX2019-000917-S) and OXISOT (PID2021- 128410OB-I00) projects. X.W., X.H., C.X., and R.D. thank the China Scholarship Council (CSC) for the scholarship support. The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 is supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S). IREC and ICN2 are funded by the CERCA Programme/Generalitat de Catalunya. Z.L. acknowledges funding from MINECO SO-FPT Ph.D. grant (SEV-2013-0295-17-1). J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER PID2021-124572OB-C31, GC 2017 SGR 128 and ICREA Academia program. Part of the present work has been performed in the frameworks of Universitat de Barcelona Nanoscience Ph.D. program and Universitat Autònoma de Barcelona Materials Science Ph.D. program., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phase Engineering of Defective Copper Selenide toward Robust Lithium-Sulfur Batteries

  • Yang, Dawei
  • Li, Mengyao
  • Zheng, Xuejiao
  • Han, Xu
  • Zhang, Chaoqi
  • Jacas Biendicho, Jordi
  • Llorca, Jordi
  • Wang, Jiaao
  • Hao, Hongchang
  • Li, Junshan
  • Henkelman, Graeme
  • Arbiol, Jordi
  • Morante, Joan Ramón
  • Mitlin, David
  • Chou, Shu-Lei
  • Cabot, Andreu
Título del postprint: Synergistically Enhancement of Electrochemical Kinetics by Phase Engineering of Defective Copper Selenide toward Robust Lithium-Sulfur Batteries, The shuttling of soluble lithium polysulfides (LiPS) and the sluggish Li-S conversion kinetics are two main barriers toward the practical application of lithium-sulfur batteries (LSBs). Herein, we propose the addition of copper selenide nanoparticles at the cathode to trap LiPS and accelerate the Li-S reaction kinetics. Using both computational and experimental results, we demonstrate the crystal phase and concentration of copper vacancies to control the electronic structure of the copper selenide, its affinity toward LiPS chemisorption, and its electrical conductivity. The adjustment of the defect density also allows for tuning the electrochemically active sites for the catalytic conversion of polysulfide. The optimized S/Cu1.8Se cathode efficiently promotes and stabilizes the sulfur electrochemistry, thus improving significantly the LSB performance, including an outstanding cyclability over 1000 cycles at 3 C with a capacity fading rate of just 0.029% per cycle, a superb rate capability up to 5 C, and a high areal capacity of 6.07 mAh cm-2 under high sulfur loading. Overall, the present work proposes a crystal phase and defect engineering strategy toward fast and durable sulfur electrochemistry, demonstrating great potential in developing practical LSBs., The authors thank the support from the projects ENE2016-77798-C4-3-R and NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union”. D.Y., M.L., X.H., and C.Z. thank the China Scholarship Council for the scholarship support. ICN2 acknowledges the support from the Severo Ochoa Programme (MINECO, grant no. SEV-2017-0706). IREC and ICN2 are both funded by the CERCA Program/Generalitat de Catalunya. This project received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No. 823717-ESTEEM3. Calculations at UT Austin were supported by the Welch Foundation (F-1841) and the Texas Advanced Computing Center. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128, and to the ICREA Academia program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermoelectric Performance of Surface-Engineered Cu1.5-xTe-Cu2Se Nanocomposites

  • Xing, Congcong
  • Zhang, Yu
  • Xiao, Ke
  • Han, Xu
  • Liu, Yu
  • Nan, Bingfei
  • García-Ramón, María
  • Lim, Khak Ho
  • Li, Junshan
  • Arbiol, Jordi
  • Poudel, Bed
  • Nozariasbmarz, Amin
  • Li, Wenjie
  • Ibáñez, María
  • Cabot, Andreu
Cu2-xS and Cu2-xSe have recently been reported as promising thermoelectric (TE) materials for medium-temperature applications. In contrast, Cu2-xTe, another member of the copper chalcogenide family, typically exhibits low Seebeck coefficients that limit its potential to achieve a superior thermoelectric figure of merit, zT, particularly in the low-temperature range where this material could be effective. To address this, we investigated the TE performance of Cu1.5-xTe-Cu2Se nanocomposites by consolidating surface-engineered Cu1.5Te nanocrystals. This surface engineering strategy allows for precise adjustment of Cu/Te ratios and results in a reversible phase transition at around 600 K in Cu1.5-xTe-Cu2Se nanocomposites, as systematically confirmed by in situ high-temperature X-ray diffraction combined with differential scanning calorimetry analysis. The phase transition leads to a conversion from metallic-like to semiconducting-like TE properties. Additionally, a layer of Cu2Se generated around Cu1.5-xTe nanoparticles effectively inhibits Cu1.5-xTe grain growth, minimizing thermal conductivity and decreasing hole concentration. These properties indicate that copper telluride based compounds have a promising thermoelectric potential, translated into a high dimensionless zT of 1.3 at 560 K., The authors acknowledge support from the projects ENE2016-77798-C4-3-R and NANOGEN (PID2020-116093RB-C43) funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, and by the “European Union”. K.X. and B.N. thank the China Scholarship Council (CSC) for scholarship support. The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 is supported by the Severo Ochoa program from the Spanish MCIN/AEI (Grant No.: CEX2021-001214-S). IREC and ICN2 are funded by the CERCA Programme/Generalitat de Catalunya. J.L. acknowledges support from the Natural Science Foundation of Sichuan province (2022NSFSC1229). Part of the present work was performed in the frameworks of Universitat de Barcelona Nanoscience Ph.D. program and Universitat Autònoma de Barcelona Materials Science Ph.D. program. Y.L. acknowledges funding from the National Natural Science Foundation of China (Grant No. 22209034) and the Innovation and Entrepreneurship Project of Overseas Returnees in Anhui Province (Grants No. 2022LCX002). K.H.L. acknowledges the financial support of the National Natural Science Foundation of China (Grant No. 22208293)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001214-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unveiling the role of counter-anions in amorphous transition metal-based oxygen evolution electrocatalysts

  • Wang, Xiang
  • Han, Xu
  • Du, Ruifeng
  • Liang, Zhifu
  • Zuo, Yong
  • Guardia, Pablo
  • Li, Junshan
  • Llorca, Jordi
  • Arbiol, Jordi
  • Zheng, Renji
  • Cabot, Andreu
At the initial stage of the oxygen evolution reaction (OER) most electrocatalysts undergo structural and chemical surface reconstruction. While this reconstruction strongly influences their performance, it is frequently overlooked. Herein, we analyze the role of the oxidized anions, which is particularly neglected in most previous works. We introduce a range of different anionic groups (Cl-, CH3COO-, NO3-, SO42-) on the surface of an amorphous ZnCoxNiyOz catalyst by a facile proton etching and ion exchange method from a ZIF-8 self-sacrificial template. The structural and chemical properties of the obtained set of materials are thoroughly analysed and correlated with their electrocatalytic performance to study the effect of surface anionic groups, phase transition, metal leaching and defect generation on OER activity. Exploiting the control possibilities provided by the synthesis method here described and employing the uncovered property-performance correlations, the electrocatalyst is optimized. As a result, we produce ZnCo1.25Ni0.73Ox-SO4 catalysts with outstanding OER performances, including a low overpotential of 252 mV at 10 mA cm−2 with a small Tafel slope of 41.6 mV dec−1. Furthermore, this catalyst exhibits remarkable stability with negligible overpotential variation for 100 h. The excellent catalytic properties are rationalized using density functional theory calculations, showing that the surface-adsorbed anions, particularly SO42−, can stabilize the OOH* intermediate, thus enhancing the OER activity. This work offers new insight into the roles of metal leaching and surface-adsorbed anions in the OER progress and facilitates the rational design of highly-efficient electrocatalysts for OER., The authors thank the support from the projects Combenergy PID2019-105490RB-C32 from the Spanish Ministerio de Ciencia e Innovación, ENE2016-77798-C4-3-R and NANOGEN (PID2020-116093RB-C43) funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the European Union. X. W., X. H. and R. D. thank the China Scholarship Council (CSC) for the scholarship support. The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 acknowledges the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). IREC and ICN2 are funded by the CERCA Programme /Generalitat de Catalunya. Z. L. acknowledges funding from MINECO SO-FPT PhD grant (SEV-2013-0295-17-1). Li is grateful for project No. 22NSFSC0966 provided by the Science & Technology Department of Sichuan Province. J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER PID2021-124572OB-C31, GC 2017 SGR 128 and ICREA Academia Program., This work was supported by Natural Science Foundation of Sichuan Province (2022NSFSC1229)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Palladium Hydride on C2N to Boost Formate Oxidation

  • Wang, Xiang
  • Montaña-Mora, Guillem
  • Han, Xu
  • Yu, Jing
  • Qi, Xueqiang
  • Arbiol, Jordi
  • Liang, Zhifu
  • Cabot, Andreu
  • Li, Junshan
The lack of electrocatalysts for the formate oxidation reaction (FOR) hampers the deployment of direct formate fuel cells (DFFCs). To overcome this limitation, herein, we detail the production of palladium hydride particles supported on C2N (PdH0.58@C2N) via a facile method. PdH0.58@C2N displays excellent FOR performance, reaching current densities up to 5.6 A·mgPd–1 and stable cycling and chronoamperometric operation. The Pd lattice expands due to the hydrogen intercalation. Besides, an electronic redistribution associated with the distinct electronegativity of Pd and H is observed. Both phenomena modify the electron energy levels, enhancing the activity and stability of the composite catalyst. More specifically, differential functional theory calculations show H intercalation to downshift the Pd d-band center in Pd0.58@C2N, weakening adsorbate binding and accelerating the FOR rate-determining step., The authors acknowledge funding from Generalitat de Catalunya 2021 SGR 01581 and the projects COMBENERGY (PID2019-105490RB-C32) from the Spanish Ministerio de Ciencia e Innovación, ENE2016-77798-C4-3-R, and NANOGEN (PID2020-116093RB-C43) funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe,” by the “European Union.” X.W., X.H., and R.D. thank the China Scholarship Council (CSC) for the scholarship support. The authors acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and 2017 SGR 1246. ICN2 acknowledges the Severo Ochoa program from Spanish MINECO (grant no. SEV-2017-0706). IREC and ICN2 are funded by the CERCA Programme/Generalitat de Catalunya. Z.L. acknowledges funding from MINECO SO-FPT PhD grant (SEV-2013-0295-17-1). Li is grateful to project No. 22NSFSC0966 provided by the Science and Technology Department of Sichuan Province. J.L. is a Serra Húnter Fellow and is grateful to MICINN/FEDER RTI2018-093996-B-C31, GC 2017 SGR 128, and ICREA Academia program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combined defect and heterojunction engineering in ZnTe/CoTe2@NC sulfur hosts toward robust lithium–sulfur batteries

  • Huang, Chen
  • Yu, Jing
  • Li, Canhuang
  • Cui, Zhibiao
  • Zhang, Chaoqi
  • Zhang, Chaoyue
  • Nan, Bingfei
  • Li, Junshan
  • Arbiol, Jordi
  • Cabot, Andreu
Lithium–sulfur batteries (LSBs) are feasible candidates for the next generation of energy storage devices, but the shuttle effect of lithium polysulfides (LiPSs) and the poor electrical conductivity of sulfur and lithium sulfides limit their application. Herein, a sulfur host based on nitrogen-doped carbon (NC) coated with small amount of a transition metal telluride (TMT) catalyst is proposed to overcome these limitations. The properties of the sulfur redox catalyst are tuned by adjusting the anion vacancy concentration and engineering a ZnTe/CoTe2 heterostructures. Theoretical calculations and experimental data demonstrate that tellurium vacancies enhance the adsorption of LiPSs, while the formed TMT/TMT and TMT/C heterostructures as well as the overall architecture of the composite simultaneously provide high Li+ diffusion and fast electron transport. As a result, v-ZnTe/CoTe2@NC/S sulfur cathodes show excellent initial capacities up to 1608 mA h g−1 at 0.1C and stable cycling with an average capacity decay rate of 0.022% per cycle at 1C during 500 cycles. Even at a high sulfur loading of 5.4 mg cm–2, a high capacity of 1273 mA h g−1 at 0.1C is retained, and when reducing the electrolyte to 7.5 µL mg−1, v-ZnTe/CoTe2@NC/S still maintains a capacity of 890.8 mA h g−1 after 100 cycles at 0.1C., The authors thank the support from the projects ENE2016-77798-C4-3-R and NANOGEN (PID2020-116093RB-C43), funded by MCIN/AEI/10.13039/501100011033/ and by “ERDF A way of making Europe,” by the “European Union.” C.H., J.Y., C.H.L., C.Q.Z., C.Y.Z., and B.F.N. thank the China Scholarship Council for the scholarship support. ICN2 acknowledges the support from the Severo Ochoa Programme (CEX2021-001214-S). IREC and ICN2 are both funded by the CERCA Program/Generalitat de Catalunya (2021SGR00457, 2021SGR01581). This project has received funding from the Advanced Materials program and was supported by MCIN with funding from European Union Next Generation EU (PRTR-C17.I1)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly conductive quasi-1D hexagonal chalcogenide perovskite Sr8Ti7S21 with efficient polysulfide regulation in lithium-sulfur batteries

  • Yang, Dawei
  • Han, Yanbing
  • Li, Mengyao
  • Li, Canhuang
  • Bi, Wei
  • Gong, Qianhong
  • Zhang, Jie
  • Zhang, Jinglu
  • Zhou, Yingtang
  • Gao, Han
  • Arbiol, Jordi
  • Shi, Zhifeng
  • Zhou, Guangmin
Lithium-sulfur batteries (LSBs) are regarded as one of the most promising candidates for next-generation energy storage systems. However, the commercialization of LSBs is still hindered by several technical issues, including the notorious polysulfide migration from the cathode to the anode and the sluggish sulfur conversion kinetics. Herein, a quasi-1D hexagonal chalcogenide perovskite, Sr8Ti7S21, is demonstrated as an efficient sulfur host able to overcome these limitations. Experimental results and density functional theory calculations show Sr8Ti7S21 to offer strong lithium polysulfides (LiPS) binding through multiple bond formation. Besides, Sr8Ti7S21 effectively facilitates the kinetics of the LiPS redox reaction. As a result, S@Sr8Ti7S21-based cathodes exhibit excellent initial capacities up to 1315 mAh g−1 at 0.2C, impressive cycling stability with an average capacity decay rate of 0.08% per cycle over 400 cycles at 1C, and a high areal capacity of 6.58 mAh cm−2 under a high sulfur loading of 6.5 mg cm−2. This work reveals the potential capabilities and promising prospects of chalcogenide perovskites in advancing LSBs technology., The authors thank the support from the projects ENE2016-77798-C4-3-R and NANOGEN (PID2020-116093RB-C43), funded by MCIN/ AEI/10.13039/501100011033/ and by “ERDF A way of making Europe”, by the “European Union”. ICN2 acknowledges funding from Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. ICN2 was supported by the Severo Ochoa program from Spanish MCIN / AEI (Grant No.: CEX2021-001214-S) and was funded by the CERCA Programme / Generalitat de Catalunya. D. Yang thanks the China Scholarship Council for the scholarship support and the funding from the National Natural Science Foundation of China (NSFC) (Grants No. 22305064). Y.H. and H.G. thank the National Natural Science Foundation of China (NSFC) (Grants No. 62104215, No.12004340)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-Atom Catalysts with Unsaturated Co–N2 Active Sites Based on a C2N 2D-Organic Framework for Efficient Sulfur Redox Reaction

  • Yang, Dawei
  • Wang, Jiaao
  • Lou, Chenjie
  • Li, Mengyao
  • Zhang, Chaoqi
  • Ramón, Alberto
  • Li, Canhuang
  • Tang, Mingxue
  • Henkelman, Graeme
  • Xu, Ming
  • Li, Junshan
  • Llorca, Jordi
  • Arbiol, Jordi
  • Mitlin, David
  • Zhou, Guangmin
  • Cabot, Andreu
The lithium-sulfur battery (LSB) is a viable option for the next generation of energy storage systems. However, the shuttle effect of lithium polysulfides (LiPS) and the poor electrical conductivity of sulfur and lithium sulfides limit its deployment. Here, we report on a 2D-organic framework, C2N, with a high loading of low-coordination cobalt single atoms (Co-SAs/C2N) as an effective sulfur host in LSB cathodes. Experimental and computational results reveal that unsaturated Co-N2 active sites with an asymmetric electron distribution act as effective polysulfide traps, accommodating electrons from polysulfide ions to form strong Sx2--Co-N bonds. Additionally, charge transfer between LiPS and unsaturated Co-N2 active sites endows immobilized LiPS with low free energy and low electrochemical decomposition energy barriers, thus accelerating the kinetic conversion of LiPS. As a result, S@Co-SAs/C2N-based cathodes exhibit superior rate performance, impressive cycling stability, and good areal capacity at high sulfur loading, 2-fold that of commercial lithium-ion batteries. This work emphasizes the potential capabilities and promising prospects of single-atom catalysts with unsaturated coordination in LSBs., This work was supported by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”, by the “European Union” through the projects ENE2016-77798-C4-3-R and PID2020-116093RB-C43. D. Yang thanks the China Scholarship Council for the scholarship support and the funding from the National Natural Science Foundation of China (NSFC) (Grants No. 22305064). M. Tang and M. Xu thank the financial support by the National Natural Science Foundation of China (Grants 21974007, U1930401, and 22102007). ICN2 acknowledges the support from the Severo Ochoa Programme from Spanish MCIN/AEI (Grant No.: CEX2021-001214-S) and Generalitat de Catalunya 2021SGR00457. This study is part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. IREC and ICN2 are both funded by the CERCA Programme/Generalitat de Catalunya. This work was supported by Fundamental Research Funds for the Central Universities (buctrc202112). J. Llorca is a Serra Húnter Fellow and is grateful to projects PID2021-124572OB-C31 and GC2021 SGR 01061 and to ICREA Academia program. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 823717-ESTEEM3. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. The authors are thankful for the support of the BSRF (Beijing Synchrotron Radiation Facility) during the XAFS measurements at the beamline 1W1B, 4B7A, 4B7B, 4B9B, and Shanghai Synchrotron Radiation Facility (SSRF)., With funding from the Spanish government through the "Severo Ochoa Centre of Excelence" accreditation (CEX2021-001214-S), Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Triphenyl phosphite as the phosphorus source for the scalable and cost-effective production of transition metal phosphides

  • Liu, Junfeng|||0000-0003-3164-6472
  • Meyns, Michaela|||0000-0003-2476-9001
  • Zhang, Ting|||0000-0002-0317-9662
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Shavel, Alexey|||0000-0002-3995-0391
Transition metal phosphides have great potential to optimize a number of functionalities in several energy conversion and storage applications, particularly when nanostructured or in nanoparticle form. However, the synthesis of transition metal phosphide nanoparticles and its scalability is often limited by the toxicity, air sensitivity, and high cost of the reagents used. We present here a simple, scalable, and cost-effective "heating up" procedure to produce metal phosphides using inexpensive, low-toxicity, and air-stable triphenyl phosphite as source of phosphorus and chlorides as metal precursors. This procedure allows the synthesis of a variety of phosphide nanoparticles, including phosphides of Ni, Co, and Cu. The use of carbonyl metal precursors further allowed the synthesis of FeP and MoP nanoparticles. The fact that minor modifications in the experimental parameters allowed producing nanoparticles with different compositions and even to tune their size and shape shows the high potential and versatility of the triphenyl phosphite precursor and the presented method. We also detail here a methodology to displace organic ligands from the surface of phosphide nanoparticles, which is a key step toward their application in energy conversion and storage systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Compositionally tuned NixSn alloys as anode materials for lithium-ion and sodium-ion batteries with a high pseudocapacitive contribution

  • Li, Junshan|||0000-0002-1482-1972
  • Xu, Xijun
  • Luo, Zhishan|||0000-0002-0801-9238
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Zuo, Yong|||0000-0003-1564-467X
  • Zhang, Ting|||0000-0002-0317-9662
  • Tang, PengYi|||0000-0002-2306-095X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Liu, Jun|||0000-0001-5288-3042
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Nickel tin alloy nanoparticles (NPs) with tuned composition NixSn (0.6 ≤ x ≤ 1.9) were synthesized by a solution-based procedure and used as anode materials for Li-ion batteries (LIBs) and Na-ion batteries (SIBs). Among the compositions tested, Ni₀₉Sn-based electrodes exhibited the best performance in both LIBs and SIBs. As LIB anodes, Ni₀₉Sn-based electrodes delivered charge-discharge capacities of 980 mAh g⁻¹ after 340 cycles at 0.2 A g⁻¹ rate, which surpassed their maximum theoretical capacity considering that only Sn is lithiated. A kinetic characterization of the charge-discharge process demonstrated the electrode performance to be aided by a significant pseudocapacitive contribution that compensated for the loss of energy storage capacity associated to the solid-electrolyte interphase formation. This significant pseudocapacitive contribution, which not only translated into higher capacities but also longer durability, was associated to the small size of the crystal domains and the proper electrode composition. The performance of NixSn-based electrodes toward Na-ion storage was also characterized, reaching significant capacities above 200 mAh g⁻¹ at 0.1 A g⁻¹ but with a relatively fast fade over 120 continuous cycles. A relatively larger pseudocapacitive contribution was obtained in Ni Sn-based electrodes for SIBs when compared with LIBs, consistently with the lower contribution of the Na ion diffusion associated to its larger size.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Colloidal Ni-Co-Sn nanoparticles as efficient electrocatalysts for the methanol oxidation reaction

  • Li, Junshan|||0000-0002-1482-1972
  • Luo, Zhishan|||0000-0002-0801-9238
  • He, Feng
  • Zuo, Yong|||0000-0003-1564-467X
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Liu, Junfeng|||0000-0003-3164-6472
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Du, Ruifeng
  • Zhang, Ting|||0000-0002-0317-9662
  • Infante Carrió, María F.
  • Tang, PengYi|||0000-0002-2306-095X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The deployment of direct methanol fuel cells requires engineering cost-effective and durable electrocatalysts for the methanol oxidation reaction (MOR). As an alternative to noble metals, Ni-based alloys have shown excellent performance and good stability toward the MOR. Herein, we present a series of NiCoSn colloidal nanoparticles (NPs) with composition tuned over the entire Ni/Co range (0 ≤ x ≤ 3). We demonstrate electrodes based on these ternary NPs to provide improved catalytic performance toward the MOR in an alkaline medium when compared with binary NiSn NPs. A preliminary composition optimization resulted in NiCoSn NP-based electrodes exhibiting extraordinary mass current densities, up to 1050 mA mg, at 0.6 V vs. Hg/HgO in 1.0 M KOH containing 1.0 M methanol. This current density was about two-fold higher than that of NiSn electrodes (563 mA mg). The excellent performance obtained with the substitution of small amounts of Ni by Co was concomitant with an increase of the surface coverage of active species and an enhancement of the diffusivity of the reaction limiting species. Additionally, saturation of the catalytic activity at higher methanol concentrations was measured for NiCoSn NP-based electrodes containing a small amount of Co when compared with binary NiSn NPs. While the electrode stability was improved with respect to elemental Ni NP-based electrodes, the introduction of small amounts of Co slightly decreased the cycling performance. Additionally, Sn, a key element to improve stability with respect to elemental Ni NPs, was observed to slowly dissolve in the presence of KOH. Density functional theory calculations on metal alloy surfaces showed the incorporation of Co within the NiSn structure to provide more effective sites for CO and CHOH adsorption. However, the relatively lower stability could not be related to CO or CHOH poisoning.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Co-Sn Nanocrystalline Solid Solutions as Anode Materials in Lithium-Ion Batteries with High Pseudocapacitive Contribution

  • Li, Junshan|||0000-0002-1482-1972
  • Xu, Xijun
  • Luo, Zhishan|||0000-0002-0801-9238
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Zuo, Yong|||0000-0003-1564-467X
  • Zhang, Ting|||0000-0002-0317-9662
  • Tang, PengYi|||0000-0002-2306-095X
  • Infante Carrió, María F.
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Liu, Jun|||0000-0001-5288-3042
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Co-Sn solid-solution nanoparticles with Sn crystal structure and tuned metal ratios were synthesized by a facile one pot solution-based procedure involving the initial reduction of a Sn precursor followed by incorporation of Co within the Sn lattice. These nanoparticles were used as anode materials for Li-ion batteries. Among the different compositions tested, Co Sn and Co Sn electrodes provided the highest capacities with values above 1500 mAh g at a current density of 0.2 A g after 220 cycles, and up to 800 mAh g at 1.0 A g after 400 cycles. Up to 81 % pseudocapacitance contribution was measured for these electrodes at a sweep rate of 1.0 mV s , thereby indicating fast kinetics and long durability. The excellent performance of Co-Sn nanoparticle alloy-based electrodes was attributed to both the small size of the crystal domains and their suitable composition, which buffered volume changes of Sn and contributed to a suitable electrode restructuration.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Solution-Processed Ultrathin SnS2-Pt Nanoplates for Photoelectrochemical Water Oxidation

  • Zuo, Yong|||0000-0003-1564-467X
  • Liu, Yongpeng|||0000-0002-4544-4217
  • Li, Junshan|||0000-0002-1482-1972
  • Du, Ruifeng
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Xing, Congcong|||0000-0001-7674-6720
  • Zhang, Ting|||0000-0002-0317-9662
  • Yao, Liang
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Sivula, Kevin|||0000-0002-8458-0270
  • Guijarro, Néstor|||0000-0002-3277-8816
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Tin disulfide (SnS ) is attracting significant interest because of the abundance of its elements and its excellent optoelectronic properties in part related to its layered structure. In this work, we specify the preparation of ultrathin SnS nanoplates (NPLs) through a hot-injection solution-based process. Subsequently, Pt was grown on their surface via in situ reduction of a Pt salt. The photoelectrochemical (PEC) performance of such nanoheterostructures as photoanode toward water oxidation was tested afterwards. Optimized SnS -Pt photoanodes provided significantly higher photocurrent densities than bare SnS and SnS -based photoanodes of previously reported study. Mott-Schottky analysis and PEC impedance spectroscopy (PEIS) were used to analyze in more detail the effect of Pt on the PEC performance. From these analyses, we attribute the enhanced activity of SnS -Pt photoanodes reported here to a combination of the very thin SnS NPLs and the proper electronic contact between Pt nanoparticles (NPs) and SnS .
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Upscaling high activity oxygen evolution catalysts based on CoFe2O4 nanoparticles supported on nickel foam for power-to-gas electrochemical conversion with energy efficiencies above 80%

  • Urbain, Félix|||0000-0001-5423-6818
  • Du, Ruifeng
  • Tang, PengYi|||0000-0002-2306-095X
  • Smirnov, Vladimir
  • Andreu, Teresa|||0000-0002-2804-4545
  • Finger, Friedhelm
  • Jiménez Divins, Nuria
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Morante, Joan Ramon|||0000-0002-4981-4633
We investigate cobalt ferrite nanoparticles (NPs) supported on large-scale electrodes as oxygen evolution reaction (OER) catalysts. Colloidal CoFeO NPs were loaded on low-cost and high surface area nickel foam (NF) scaffolds. The coating process was optimized for large electrode areas, ensuring a proper distribution of the NPs on the NF that allowed overcoming the electrical conductivity limitations of oxide NPs. We were able to produce CoFeO-coated NFs having 10 cm geometric surface areas with overpotentials below 300 mV for the OER at a current density of 50 mA/cm. Such impressively low overpotentials suggested using CoFeO NP-based electrodes within a water electrolysis device. In this prototype device, stable operating currents up to 500 mA at remarkably low cell-voltages of 1.62 and 1.53 V, at ambient and 50 °C electrolyte temperatures, respectively, were reached during operation periods of up to 50 h. The high electrochemical energy efficiencies reached at 50 mA/cm, 75% and 81% respectively, rendered these devices particularly appealing to be combined with low-cost photovoltaic systems for bias-free hydrogen production. Therefore, CoFeO NP-based electrolysers were coupled to low-cost thin-film silicon solar cells with 13% efficiency to complete a system that afforded solar-to-fuel efficiencies above 10%.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Porous NiTiO3/TiO2 nanostructures for photocatatalytic hydrogen evolution

  • Xing, Congcong|||0000-0001-7674-6720
  • Liu, Yongpeng|||0000-0002-4544-4217
  • Zhang, Yu|||0000-0002-0332-0013
  • Liu, Junfeng|||0000-0003-3164-6472
  • Zhang, Ting|||0000-0002-0317-9662
  • Tang, PengYi|||0000-0002-2306-095X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Soler, Lluís|||0000-0003-1591-3366
  • Sivula, Kevin|||0000-0002-8458-0270
  • Guijarro, Néstor|||0000-0002-3277-8816
  • Wang, Xiang
  • Li, Junshan|||0000-0002-1482-1972
  • Du, Ruifeng
  • Zuo, Yong|||0000-0003-1564-467X
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Llorca, Jordi|||0000-0002-7447-9582
We present a strategy to produce porous NiTiO/TiO nanostructures with excellent photocatalytic activity toward hydrogen generation. In a first step, nickel-doped TiO needle bundles were synthesized by a hydrothermal procedure. Through the sintering in air of these nanostructures, porous NiTiO/TiO heterostructured rods were obtained. Alternatively, the annealing in argon of the nickel-doped TiO needle bundles resulted in NiO/TiO elongated nanostructures. Porous NiTiO/TiO structures were tested for hydrogen evolution in the presence of ethanol. Such porous heterostructures exhibited superior photocatalytic activity toward hydrogen generation, with hydrogen production rates up to 11.5 mmol h g at room temperature. This excellent performance is related here to the optoelectronic properties and geometric parameters of the material.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Combined High Catalytic Activity and Efficient Polar Tubular Nanostructure in Urchin-Like Metallic NiCo2Se4 for High-Performance Lithium-Sulfur Batteries

  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Zhang, Ting|||0000-0002-0317-9662
  • Du, Ruifeng
  • Li, Junshan|||0000-0002-1482-1972
  • Yang, Xuhui
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Urchin-shaped NiCoSe (u-NCSe) nanostructures as efficient sulfur hosts are synthesized to overcome the limitations of lithium-sulfur batteries (LSBs). u-NCSe provides a beneficial hollow structure to relieve volumetric expansion, a superior electrical conductivity to improve electron transfer, a high polarity to promote absorption of lithium polysulfides (LiPS), and outstanding electrocatalytic activity to accelerate LiPS conversion kinetics. Owing to these excellent qualities as cathode for LSBs, S@u-NCSe delivers outstanding initial capacities up to 1403 mAh g at 0.1 C and retains 626 mAh g at 5 C with exceptional rate performance. More significantly, a very low capacity decay rate of only 0.016% per cycle is obtained after 2000 cycles at 3 C. Even at high sulfur loading (3.2 mg cm), a reversible capacity of 557 mAh g is delivered after 600 cycles at 1 C. Density functional theory calculations further confirm the strong interaction between NCSe and LiPS, and cytotoxicity measurements prove the biocompatibility of NCSe. This work not only demonstrates that transition metal selenides can be promising candidates as sulfur host materials, but also provides a strategy for the rational design and the development of LSBs with long-life and high-rate electrochemical performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Chromium phosphide CrP as highly active and stable electrocatalysts for oxygen electroreduction in alkaline media

  • Liu, Junfeng|||0000-0003-3164-6472
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Du, Ruifeng
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Zhang, Ting|||0000-0002-0317-9662
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Wang, Ying
  • Meyns, Michaela|||0000-0003-2476-9001
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Catalysts for oxygen reduction reaction (ORR) are key components in emerging energy technologies such as fuel cells and metal-air batteries. Developing low-cost, high performance and stable electrocatalysts is critical for the extensive implementation of these technologies. Herein, we present a procedure to prepare colloidal chromium phosphide CrP nanocrystals and we test their performance as ORR electrocatalyst. CrP-based catalysts exhibited remarkable activities with a limiting current density of 4.94 mA cm at 0.2 V, a half-potential of 0.65 V and an onset potential of 0.8 V at 1600 rpm, which are comparable to commercial Pt/C. Advantageously, CrP-based catalysts displayed much higher stabilities and higher tolerances to methanol in alkaline solution. Using density functional theory calculations, we demonstrate CrP to provide a very strong chemisorption of O that facilitates its reduction and explains the excellent ORR performance experimentally demonstrated.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Graphene-supported palladium phosphide PdP2 nanocrystals for ethanol electrooxidation

  • Liu, Junfeng|||0000-0003-3164-6472
  • Luo, Zhishan|||0000-0002-0801-9238
  • Li, Junshan|||0000-0002-1482-1972
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Llorca, Jordi|||0000-0002-7447-9582
  • Nasiou, Déspina
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Meyns, Michaela|||0000-0003-2476-9001
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
We present a procedure to produce single-phase PdP nanocrystals (NCs). The approach involves the reaction of palladium(II) acetylacetonate and hexamethylphosphoroustriamide to nucleate defective Pd P nanoparticles that subsequently, with further phosphorous incorporation, crystallize into PdP . The synthesized PdP NCs were supported on reduced graphene oxide (rGO) and applied as electrocatalysts for ethanol oxidation. The activity of PdP toward the ethanol oxidation reaction (EOR) was over a threefold higher than that of Pd NCs prepared under similar conditions. Even better performance was obtained from PdP NCs supported on rGO, which showed current densities up to 51.4 mA cm and mass activities of 1.60 A mg , that is 4.8 and 15 times higher than Pd NCs. Besides, PdP NCs and PdP /rGO catalysts showed improved stability during EOR than Pd NCs and Pd/rGO.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

In Situ Electrochemical Oxidation of Cu2S into CuO Nanowires as a Durable and Efficient Electrocatalyst for Oxygen Evolution Reaction

  • Zuo, Yong|||0000-0003-1564-467X
  • Liu, Yongpeng|||0000-0002-4544-4217
  • Li, Junshan|||0000-0002-1482-1972
  • Du, Ruifeng
  • Han, Xu|||0000-0001-8319-8830
  • Zhang, Ting|||0000-0002-0317-9662
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Jiménez Divins, Nuria
  • Llorca, Jordi|||0000-0002-7447-9582
  • Guijarro, Néstor|||0000-0002-3277-8816
  • Sivula, Kevin|||0000-0002-8458-0270
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Development of cost-effective oxygen evolution catalysts is of capital importance for the deployment of large-scale energy-storage systems based on metal-air batteries and reversible fuel cells. In this direction, a wide range of materials have been explored, especially under more favorable alkaline conditions, and several metal chalcogenides have particularly demonstrated excellent performances. However, chalcogenides are thermodynamically less stable than the corresponding oxides and hydroxides under oxidizing potentials in alkaline media. Although this instability in some cases has prevented the application of chalcogenides as oxygen evolution catalysts and it has been disregarded in some others, we propose to use it in our favor to produce high-performance oxygen evolution catalysts. We characterize here the in situ chemical, structural, and morphological transformation during the oxygen evolution reaction (OER) in alkaline media of CuS into CuO nanowires, mediating the intermediate formation of Cu(OH). We also test their OER activity and stability under OER operation in alkaline media and compare them with the OER performance of Cu(OH) and CuO nanostructures directly grown on the surface of a copper mesh. We demonstrate here that CuO produced from in situ electrochemical oxidation of CuS displays an extraordinary electrocatalytic performance toward OER, well above that of CuO and Cu(OH) synthesized without this transformation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Superior methanol electrooxidation performance of (110)-faceted nickel polyhedral nanocrystals

  • Li, Junshan|||0000-0002-1482-1972
  • Zuo, Yong|||0000-0003-1564-467X
  • Liu, Junfeng|||0000-0003-3164-6472
  • Wang, Xiang
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Du, Ruifeng
  • Zhang, Ting|||0000-0002-0317-9662
  • Infante Carrió, María F.
  • Tang, PengYi|||0000-0002-2306-095X
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Luo, Zhishan|||0000-0002-0801-9238
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
We present the synthesis of (110)-faceted nickel polyhedral nanocrystals (NCs) and their characterization as electrocatalysts for the methanol oxidation reaction (MOR). Ni NCs were produced at 180 °C through the reduction in solution of a Ni salt. They were combined with carbon black and Nafion and deposited over glassy carbon to study their electrocatalytic properties. Electrodes based on (110)-faceted Ni NCs displayed a first order reaction with KOH in the concentration range from 0.1 M to 1.0 M. These electrodes were characterized by higher coverages of active species, but lower diffusion coefficients of the species limiting the reaction rate when compared with electrodes prepared from spherical Ni NCs. Overall, electrodes based on faceted Ni NCs displayed excellent performance with very high current densities, up to 61 mA cm, and unprecedented mass activities, up to 2 A mg, at 0.6 V vs. Hg/HgO in 1.0 M KOH containing 1.0 M methanol. These electrodes also displayed a notable stability. While they suffered an activity loss of ca. 30% during the first 10000 s of operation, afterward activity stabilized at very high current densities, ∼35 mA cm, and mass activities, ∼1.2 A mg, with only a 0.5% decrease during operation from 20000 to 30000 s.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A low temperature solid state reaction to produce hollow MnxFe3-xO4 nanoparticles as anode for lithium-ion batteries

  • Yu, Xiaoting|||0000-0003-0457-4047
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Luo, Zhishan|||0000-0002-0801-9238
  • Zhang, Ting|||0000-0002-0317-9662
  • Liu, Junfeng|||0000-0003-3164-6472
  • Li, Junshan|||0000-0002-1482-1972
  • Zuo, Yong|||0000-0003-1564-467X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Hollow MnFeO nanoparticles (NPs) with an average size of 15 nm are produced from the solid state reaction of FeO-MnO heterostructures. These heterostructures are synthesized through the seeded-growth of MnO crystal domains on the surface of hollow FeO NPs obtained by the nanoscale Kirkendall effect. FeO-MnO heterostructures are subsequently annealed at 500 °C, enough temperature to promote the interfusion of Fe and Mn ions, but without compromising the hollow geometry. MnFeO nanostructures are tested as anode in lithium-ion batteries (LIBs), delivering large lithium storage capacities and high-rate capabilities of 1054 mAh g at 0.1 A g and 369 mAh g at 5 A g. Additionally, hollow MnFeO NPs display long cycling stability, with a capacity up to 887 mAh g at 0.3 A g after 450 cycles. The excellent performance of hollow MnFeO NPs as anode for LIBs is associated with their crystal structure, composition, and the presence of carbonized ligands, which further promote electrical conductivity and buffer the volume changes during cycling. Additionally, the small particle size and hollow morphology improves the lithium kinetics, structural stability and cycling performance.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

SnS2/g-C3N4/graphite nanocomposites as durable lithium-ion battery anode with high pseudocapacitance contribution

  • Zuo, Yong|||0000-0003-1564-467X
  • Xu, Xijun
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Li, Junshan|||0000-0002-1482-1972
  • Du, Ruifeng
  • Wang, Xiang
  • Han, Xu|||0000-0001-8319-8830
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Liu, Jun|||0000-0001-5288-3042
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Tin disulfide is a promising anode material for Li-ion batteries (LIB) owing to its high theoretical capacity and the abundance of its composing elements. However, bare SnS suffers from low electrical conductivity and large volume expansion, which results in poor rate performance and cycling stability. Herein, we present a solution-based strategy to grow SnS nanostructures within a matrix of porous g-CN (CN) and high electrical conductivity graphite plates (GPs). We test the resulting nanocomposite as anode in LIBs. First, SnS nanostructures with different geometries are tested, to find out that thin SnS nanoplates (SnS-NPLs) provide the highest performances. Such SnS-NPLs, incorporated into hierarchical SnS/CN/GP nanocomposites, display excellent rate capabilities (536.5 mA h g at 2.0 A g) and an outstanding stability (∼99.7% retention after 400 cycles), which are partially associated with a high pseudocapacitance contribution (88.8% at 1.0 mV s). The excellent electrochemical properties of these nanocomposites are ascribed to the synergy created between the three nanocomposite components: i) thin SnS-NPLs provide a large surface for rapid Li-ion intercalation and a proper geometry to stand volume expansions during lithiation/delithiation cycles; ii) porous CN prevents SnS-NPLs aggregation, habilitates efficient channels for Li-ion diffusion and buffer stresses associated to SnS volume changes; and iii) conductive GPs allow an efficient charge transport.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tin selenide molecular precursor for the solution processing of thermoelectric materials and devices

  • Zhang, Yu|||0000-0002-0332-0013
  • Liu, Yu|||0000-0001-7313-6740
  • Xing, Congcong|||0000-0001-7674-6720
  • Zhang, Ting|||0000-0002-0317-9662
  • Li, Mengyao|||0000-0002-9082-7938
  • Pacios Pujadó, Merce|||0000-0002-3559-4561
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cadavid, Doris|||0000-0002-1376-6078
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
In the present work, we report a solution-based strategy to produce crystallographically textured SnSe bulk nanomaterials and printed layers with optimized thermoelectric performance in the direction normal to the substrate. Our strategy is based on the formulation of a molecular precursor that can be continuously decomposed to produce a SnSe powder or printed into predefined patterns. The precursor formulation and decomposition conditions are optimized to produce pure phase 2D SnSe nanoplates. The printed layer and the bulk material obtained after hot press displays a clear preferential orientation of the crystallographic domains, resulting in an ultralow thermal conductivity of 0.55 W m-1 K-1 in the direction normal to the substrate. Such textured nanomaterials present highly anisotropic properties with the best thermoelectric performance in plane, i.e., in the directions parallel to the substrate, which coincide with the crystallographic bc plane of SnSe. This is an unfortunate characteristic because thermoelectric devices are designed to create/harvest temperature gradients in the direction normal to the substrate. We further demonstrate that this limitation can be overcome with the introduction of small amounts of tellurium in the precursor. The presence of tellurium allows one to reduce the band gap and increase both the charge carrier concentration and the mobility, especially the cross plane, with a minimal decrease of the Seebeck coefficient. These effects translate into record out of plane ZT values at 800 K.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Monodisperse CoSn and NiSn nanoparticles supported on commercial carbon as anode for lithium- and potassium-ion batteries

  • Li, Junshan|||0000-0002-1482-1972
  • Xu, Xijun
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Han, Xu|||0000-0001-8319-8830
  • Zhang, Ting|||0000-0002-0317-9662
  • Zuo, Yong|||0000-0003-1564-467X
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Yang, Dawei|||0000-0002-3842-8286
  • Wang, Xiang
  • Luo, Zhishan|||0000-0002-0801-9238
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Liu, Jun|||0000-0001-5288-3042
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Monodisperse CoSn and NiSn nanoparticles were prepared in solution and supported on commercial carbon black. The obtained nanocomposites were applied as anodes for Li- and K-ion batteries. CoSn@C delivered stable average capacities of 850, 650, and 500 mAh g-1 at 0.2, 1.0, and 2.0 A g-1, respectively, well above those of commercial graphite anodes. The capacity of NiSn@C retained up to 575 mAh g-1 at a current of 1.0 A g-1 over 200 continuous cycles. Up to 74.5 and 69.7% pseudocapacitance contributions for Li-ion batteries were measured for CoSn@C and NiSn@C, respectively, at 1.0 mV s-1. CoSn@C was further tested in full-cell lithium-ion batteries with a LiFePO4 cathode to yield a stable capacity of 350 mAh g-1 at a rate of 0.2 A g-1. As electrode in K-ion batteries, CoSn@C composites presented a stable capacity of around 200 mAh g-1 at 0.2 A g-1 over 400 continuous cycles, and NiSn@C delivered a lower capacity of around 100 mAh g-1 over 300 cycles.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Selective methanol-to-formate electrocatalytic conversion on branched nickel carbide

  • Li, Junshan|||0000-0002-1482-1972
  • Wei, Ruilin
  • Wang, Xiang
  • Zuo, Yong|||0000-0003-1564-467X
  • Han, Xu|||0000-0001-8319-8830
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Yang, Yaoyue|||0000-0002-4573-9437
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Cui, Chunhua|||0000-0002-2774-1576
A methanol economy will be favored by the availability of low-cost catalysts able to selectively oxidize methanol to formate. This selective oxidation would allow extraction of the largest part of the fuel energy while concurrently producing a chemical with even higher commercial value than the fuel itself. Herein, we present a highly active methanol electrooxidation catalyst based on abundant elements and with an optimized structure to simultaneously maximize interaction with the electrolyte and mobility of charge carriers. In situ infrared spectroscopy combined with nuclear magnetic resonance spectroscopy showed that branched nickel carbide particles are the first catalyst determined to have nearly 100 % electrochemical conversion of methanol to formate without generating detectable CO as a byproduct. Electrochemical kinetics analysis revealed the optimized reaction conditions and the electrode delivered excellent activities. This work provides a straightforward and cost-efficient way for the conversion of organic small molecules and the first direct evidence of a selective formate reaction pathway.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Stability of Pd3Pb nanocubes during electrocatalytic thanol oxidation

  • Yu, Xiaoting|||0000-0003-0457-4047
  • Luo, Zhishan|||0000-0002-0801-9238
  • Zhang, Ting|||0000-0002-0317-9662
  • Tang, PengYi|||0000-0002-2306-095X
  • Li, Junshan|||0000-0002-1482-1972
  • Wang, Xiang
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Liu, Junfeng|||0000-0003-3164-6472
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Intermetallic PdPb nanocrystals with controlled size and cubic geometry exposing (100) facets are synthesized and tested as electrocatalysts for ethanol oxidation in alkaline media. We observe the ethanol oxidation activity and stability to be size-dependent. The 10 nm PdPb nanocrystals display the highest initial current densities, but after few hundred cycles, the current density of smaller nanocrystals becomes much larger. All of the catalysts exhibit a pronounced current decay during the first 500 s of continuous operation, which is associated with the accumulation of strongly adsorbed reaction intermediates, blocking reaction sites. These adsorbed species can be removed by cycling the catalysts or maintaining them at slightly higher potentials for a short period of time to oxidize and later reduce the Pd surface. Such simple cleaning processes, that can be performed during operation breaks without cell disassembly, is sufficient to effectively remove the poisoning species adsorbed on the surface and recover the electrocatalytic activity.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Phosphorous incorporation in Pd₂Sn alloys for electrocatalytic ethanol oxidation

  • Yu, Xiaoting|||0000-0003-0457-4047
  • Liu, Junfeng|||0000-0003-3164-6472
  • Li, Junshan|||0000-0002-1482-1972
  • Luo, Zhishan|||0000-0002-0801-9238
  • Zuo, Yong|||0000-0003-1564-467X
  • Xing, Congcong|||0000-0001-7674-6720
  • Llorca, Jordi|||0000-0002-7447-9582
  • Nasiou, Déspina
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Pan, Kai
  • Kleinhanns, Tobias
  • Xie, Ying
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Direct ethanol fuel cells (DEFCs) show a huge potential to power future electric vehicles and portable electronics, but their deployment is currently limited by the unavailability of proper electrocatalysis for the ethanol oxidation reaction (EOR). In this work, we engineer a new electrocatalyst by incorporating phosphorous into a palladium-tin alloy and demonstrate a significant performance improvement toward EOR. We first detail a synthetic method to produce Pd₂Sn:P nanocrystals that incorporate 35% of phosphorus. These nanoparticles are supported on carbon black and tested for EOR. Pd₂Sn:P/C catalysts exhibit mass current densities up to 5.03 A mg , well above those of Pd₂Sn/C, Pd₂P/C and Pd/C reference catalysts. Furthermore, a twofold lower Tafel slope and a much longer durability are revealed for the Pd₂Sn:P/C catalyst compared with Pd/C. The performance improvement is rationalized with the aid of density functional theory (DFT) calculations considering different phosphorous chemical environments. Depending on its oxidation state, surface phosphorus introduces sites with low energy OH adsorption and/or strongly influences the electronic structure of palladium and tin to facilitate the oxidation of the acetyl to acetic acid, which is considered the EOR rate limiting step. DFT calculations also points out that the durability improvement of Pd₂Sn:P/C catalyst is associated to the promotion of OH adsorption that accelerates the oxidation of intermediate poisoning CO, reactivating the catalyst surface.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A SnS2 molecular precursor for conformal nanostructured coatings

  • Zuo, Yong|||0000-0003-1564-467X
  • Li, Junshan|||0000-0002-1482-1972
  • Yu, Xiaoting|||0000-0003-0457-4047
  • Du, Ruifeng
  • Zhang, Ting|||0000-0002-0317-9662
  • Wang, Xiang
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
We present a simple, versatile, and scalable procedure to produce SnS nanostructured layers based on an amine/thiol-based molecular ink. The ratios amine/thiol and Sn/S, and the reaction conditions, are systematically investigated to produce phase-pure SnS planar and conformal layers with a tremella-like SnS morphology. Such nanostructured layers are characterized by excellent photocurrent densities. The same strategy can be used to produce SnS-graphene composites by simply introducing graphene oxide (GO) into the initial solution. Conveniently, the solvent mixture is able to simultaneously dissolve the Sn and Se powders and reduce the GO. Furthermore, SnSSe ternary coatings and phase-pure SnSe can be easily produced by simply incorporating proper amounts of Se into the initial ink formulation. Finally, the potential of this precursor ink to produce gram-scale amounts of unsupported SnS is investigated._.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A novel π-d conjugated cobalt tetraaza[14]annulene based atomically dispersed electrocatalyst for efficient CO2 reduction

  • Liang, Zhifu
  • Zhang, Ting|||0000-0002-0317-9662
  • Cao, Pengfei
  • Yoshida, Takefumi
  • Tang, Weiqiang|||0000-0002-7726-4130
  • Wang, Xiang
  • Zuo, Yong|||0000-0003-1564-467X
  • Tang, PengYi|||0000-0002-2306-095X
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Yamashita, Masahiro
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Tetraaza[14]annulenes (TAA) are synthetic macrocycles which are analogue to porphyrins. However, there are almost no reports about the synthesis of polymers based on TAA and neither on their use as electrocatalysts. The study of new catalysts to promote an efficient electrochemical conversion of carbon dioxide to valuable chemicals is a promising approach to relieve the pressure of carbon emissions and realize the carbon cycle. Herein, we first report the synthesis of a novel tetraaza[14]annulene (TAA) based organic polymeric metal complex (PMC) by a non-template method. This PMC is used as ligand to construct a π-d conjugated cobalt coordination polymer (Poly-TAA-Co) with CoN structure which is supported on multi-wall carbon nanotubes (CNTs) to work as an atomically dispersed efficient electrocatalyst for the CO reduction reaction (CORR). The resulting catalyst (Poly-TAA-Co-CNT) exhibits excellent performance, with a 90% CO faradaic efficiency, a low overpotential (390 mV) and good stability in 0.5 M KHCO aqueous solution. Density functional theory calculations confirmed that the cobalt tetra[14]annulene is an excellent active site for electrocatalytic CORR. This work not only inspires the design of novel TAA based macromolecules, but also paves the way to the development and application of new molecular-based catalysts for electrocatalytic CORR.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Molecular engineering to tune the ligand environment of atomically dispersed nickel for efficient alcohol electrochemical oxidation

  • Liang, Zhifu
  • Jiang, Daochuan
  • Wang, Xiang
  • Shakouri, Mohsen
  • Zhang, Ting|||0000-0002-0317-9662
  • Li, Zhongjun
  • Tang, PengYi|||0000-0002-2306-095X
  • Llorca, Jordi|||0000-0002-7447-9582
  • Liu, Lijia
  • Yuan, Yupeng
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Atomically dispersed metals maximize the number of catalytic sites and enhance their activity. However, their challenging synthesis and characterization strongly complicates their optimization. Here, the aim is to demonstrate that tuning the electronic environment of atomically dispersed metal catalysts through the modification of their edge coordination is an effective strategy to maximize their performance. This article focuses on optimizing nickel-based electrocatalysts toward alcohol electrooxidation in alkaline solution. A new organic framework with atomically dispersed nickel is first developed. The coordination environment of nickel within this framework is modified through the addition of carbonyl (CO) groups. The authors then demonstrate that such nickel-based organic frameworks, combined with carbon nanotubes, exhibit outstanding catalytic activity and durability toward the oxidation of methanol (CHOH), ethanol (CHCHOH), and benzyl alcohol (CHCHOH); the smaller molecule exhibits higher catalytic performance. These outstanding electrocatalytic activities for alcohol electrooxidation are attributed to the presence of the carbonyl group in the ligand chemical environment, which enhances the adsorption for alcohol, as revealed by density functional theory calculations. The work not only introduces a new atomically dispersed Ni-based catalyst, but also demonstrates a new strategy for designing and engineering high-performance catalysts through the tuning of their chemical environment.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Enhanced polysulfide conversion with highly conductive and electrocatalytic iodine-doped Bismuth selenide nanosheets in lithium-sulfur batteries

  • Li, Mengyao|||0000-0002-9082-7938
  • Yang, Dawei|||0000-0002-3842-8286
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Han, Xu|||0000-0001-8319-8830
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Liu, Kun
  • Diao, Jiefeng|||0000-0001-6976-7689
  • Li, Junshan|||0000-0002-1482-1972
  • Wang, Jing
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Wang, Jiaao|||0000-0002-4944-4951
  • Henkelman, Graeme|||0000-0002-0336-7153
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Chou, Shulei|||0000-0003-1155-6082
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The shuttling behavior and sluggish conversion kinetics of intermediate lithium polysulfides (LiPS) represent the main obstacles to the practical application of lithium-sulfur batteries (LSBs). Herein, an innovative sulfur host is proposed, based on an iodine-doped bismuth selenide (I-BiSe), able to solve these limitations by immobilizing the LiPS and catalytically activating the redox conversion at the cathode. The synthesis of I-BiSe nanosheets is detailed here and their morphology, crystal structure, and composition are thoroughly. Density-functional theory and experimental tools are used to demonstrate that I-BiSe nanosheets are characterized by a proper composition and micro- and nano-structure to facilitate Li diffusion and fast electron transportation, and to provide numerous surface sites with strong LiPS adsorbability and extraordinary catalytic activity. Overall, I-BiSe/S electrodes exhibit outstanding initial capacities up to 1500 mAh g at 0.1 C and cycling stability over 1000 cycles, with an average capacity decay rate of only 0.012% per cycle at 1 C. Besides, at a sulfur loading of 5.2 mg cm, a high areal capacity of 5.70 mAh cm at 0.1 C is obtained with an electrolyte/sulfur ratio of 12 µL mg. This work demonstrated that doping is an effective way to optimize the metal selenide catalysts in LSBs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hydrogen photogeneration using ternary CuGaS2-TiO2-Pt nanocomposites

  • Caudillo-Flores, Uriel|||0000-0002-2492-8407
  • Kubacka, Anna
  • Berestok, Taisiia
  • Zhang, Ting|||0000-0002-0317-9662
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Fernández-García, Marcos|||0000-0002-9987-0289
In this contribution we synthesized ternary CuGaS-TiO-Pt materials. The semiconductor components were surface functionalized with mercapto-alifatic acids to drive their linking and were platinized prior to or after contact between the semiconductors. The corresponding samples were utilized in the photo-production of hydrogen using methanol as a sacrificial agent. The testing under UV and visible illumination conditions together with the calculation of the true quantum efficiency of the process demonstrate the outstanding performance of these ternary materials under sunlight operation. Optimum activity was achieved for samples having a 3 to 5 wt % of the chalcogenide and a selective interaction of the noble metal with the major oxide component. The physico-chemical characterization and particularly the use of photoluminescence spectroscopy showed that photo-activity is controlled by charge separation under illumination, which drives to charge location of electrons and holes in different components of the powders and the efficient use of charge carriers in the chemical reaction.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Electrochemical reforming of ethanol with acetate Co-Production on nickel cobalt selenide nanoparticles

  • Li, Junshan|||0000-0002-1482-1972
  • Wang, Xiang
  • Xing, Congcong|||0000-0001-7674-6720
  • Li, Luming
  • Mu, Shijia
  • Han, Xu|||0000-0001-8319-8830
  • He, Ren|||0000-0003-3712-5539
  • Liang, Zhifu
  • Martínez-Alanis, Paulina R.|||0000-0003-3675-4472
  • Yi, Yunan
  • Wu, Qianbao|||0000-0003-3236-8582
  • Pan, Huiyan
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cui, Chunhua|||0000-0002-2774-1576
  • Zhang, Yu|||0000-0002-0332-0013
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The energy efficiency of water electrolysis is limited by the sluggish reaction kinetics of the anodic oxygen evolution reaction (OER). To overcome this limitation, OER can be replaced by a less demanding oxidation reaction, which in the ideal scenario could be even used to generate additional valuable chemicals. Herein, we focus on the electrochemical reforming of ethanol in alkaline media to generate hydrogen at a Pt cathode and acetate as a co-product at a NiCoSe anode. We first detail the solution synthesis of a series of NiCoSe electrocatalysts. By adjusting the Ni/Co ratio, the electrocatalytic activity and selectivity for the production of acetate from ethanol are optimized. Best performances are obtained at low substitutions of Ni by Co in the cubic NiSe phase. Density function theory reveals that the Co substitution can effectively enhance the ethanol adsorption and decrease the energy barrier for its first step dehydrogenation during its conversion to acetate. However, we experimentally observe that too large amounts of Co decrease the ethanol-to-acetate Faradaic efficiency from values above 90% to just 50 %. At the optimized composition, the NiCoSe electrode delivers a stable chronoamperometry current density of up to 45 mA cm, corresponding to 1.2 A g, in a 1 M KOH + 1 M ethanol solution, with a high ethanol-to-acetate Faradaic efficiency of 82.2% at a relatively low potential, 1.50 V vs. RHE, and with an acetate production rate of 0.34 mmol cm-2 h-1.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Phase engineering of defective copper selenide toward robust lithium-sulfur batteries, Synergistically enhancement of electrochemical kinetics by phase engineering of defective copper selenide toward robust lithium-sulfur Batteries

  • Yang, Dawei|||0000-0002-3842-8286
  • Li, Mengyao|||0000-0002-9082-7938
  • Zheng, Xuejiao
  • Han, Xu|||0000-0001-8319-8830
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Llorca, Jordi|||0000-0002-7447-9582
  • Wang, Jiaao|||0000-0002-4944-4951
  • Hao, Hongchang|||0000-0003-4190-4105
  • Li, Junshan|||0000-0002-1482-1972
  • Henkelman, Graeme|||0000-0002-0336-7153
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Mitlin, David
  • Chou, Shulei|||0000-0003-1155-6082
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The shuttling of soluble lithium polysulfides (LiPS) and the sluggish Li-S conversion kinetics are two main barriers toward the practical application of lithium-sulfur batteries (LSBs). Herein, we propose the addition of copper selenide nanoparticles at the cathode to trap LiPS and accelerate the Li-S reaction kinetics. Using both computational and experimental results, we demonstrate the crystal phase and concentration of copper vacancies to control the electronic structure of the copper selenide, its affinity toward LiPS chemisorption, and its electrical conductivity. The adjustment of the defect density also allows for tuning the electrochemically active sites for the catalytic conversion of polysulfide. The optimized S/Cu1.8Se cathode efficiently promotes and stabilizes the sulfur electrochemistry, thus improving significantly the LSB performance, including an outstanding cyclability over 1000 cycles at 3 C with a capacity fading rate of just 0.029% per cycle, a superb rate capability up to 5 C, and a high areal capacity of 6.07 mAh cm-2 under high sulfur loading. Overall, the present work proposes a crystal phase and defect engineering strategy toward fast and durable sulfur electrochemistry, demonstrating great potential in developing practical LSBs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unveiling the role of counter-anions in amorphous transition metal-based oxygen evolution electrocatalysts

  • Wang, Xiang
  • Han, Xu|||0000-0001-8319-8830
  • Du, Ruifeng
  • Liang, Zhifu
  • Zuo, Yong|||0000-0003-1564-467X
  • Guardia, Pablo|||0000-0001-9076-4642
  • Li, Junshan|||0000-0002-1482-1972
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Zheng, Renji
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
At the initial stage of the oxygen evolution reaction (OER) most electrocatalysts undergo structural and chemical surface reconstruction. While this reconstruction strongly influences their performance, it is frequently overlooked. Herein, we analyze the role of the oxidized anions, which is particularly neglected in most previous works. We introduce a range of different anionic groups (Cl, CHCOO, NO , SO ) on the surface of an amorphous ZnCoNiO catalyst by a facile proton etching and ion exchange method from a ZIF-8 self-sacrificial template. The structural and chemical properties of the obtained set of materials are thoroughly analysed and correlated with their electrocatalytic performance to study the effect of surface anionic groups, phase transition, metal leaching and defect generation on OER activity. Exploiting the control possibilities provided by the synthesis method here described and employing the uncovered property-performance correlations, the electrocatalyst is optimized. As a result, we produce ZnCoNiO-SO catalysts with outstanding OER performances, including a low overpotential of 252 mV at 10 mA cm with a small Tafel slope of 41.6 mV dec. Furthermore, this catalyst exhibits remarkable stability with negligible overpotential variation for 100 h. The excellent catalytic properties are rationalized using density functional theory calculations, showing that the surface-adsorbed anions, particularly SO , can stabilize the OOH* intermediate, thus enhancing the OER activity. This work offers new insight into the roles of metal leaching and surface-adsorbed anions in the OER progress and facilitates the rational design of highly-efficient electrocatalysts for OER.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Nickel iron diselenide for highly efficient and selective electrocatalytic conversion of methanol to formate

  • Li, Junshan|||0000-0002-1482-1972
  • Xing, Congcong|||0000-0001-7674-6720
  • Zhang, Yu|||0000-0002-0332-0013
  • Zhang, Ting|||0000-0002-0317-9662
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Wu, Qianbao|||0000-0003-3236-8582
  • Yi, Yunan
  • He, Shenglan
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Cui, Chunhua|||0000-0002-2774-1576
The electro-oxidation of methanol to formate is an interesting example of the potential use of renewable energies to add value to a biosourced chemical commodity. Additionally, methanol electro-oxidation can replace the sluggish oxygen evolution reaction when coupled to hydrogen evolution or to the electroreduction of other biomass-derived intermediates. But the cost-effective realization of these reaction schemes requires the development of efficient and low-cost electrocatalysts. Here, a noble metal-free catalyst, Ni FeSe nanorods, with a high potential for an efficient and selective methanol conversion to formate is demonstrated. At its optimum composition, NiFeSe, this diselenide is able to produce 0.47 mmol cm h of formate at 50 mA cm with a Faradaic conversion efficiency of 99%. Additionally, this noble-metal-free catalyst is able to continuously work for over 50 000 s with a minimal loss of efficiency, delivering initial current densities above 50 mA cm and 2.2 A mg in a 1.0 m KOH electrolyte with 1.0 m methanol at 1.5 V versus reversible hydrogen electrode. This work demonstrates the highly efficient and selective methanol-to-formate conversion on Ni-based noble-metal-free catalysts, and more importantly it shows a very promising example to exploit the electrocatalytic conversion of biomass-derived chemicals.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Temperature-controlled switchable photochromism in solid materials

  • Julià López, Àlex|||0000-0002-3357-8349
  • Hernando, Jordi|||0000-0002-1126-4138
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Gonzalez Monje, Pablo|||0000-0001-8781-8574
  • Sedó Vegara, Josep|||0000-0002-4195-7541
  • Roscini, Claudio|||0000-0002-0157-8934
A novel strategy to achieve thermally switchable photochromism in solid materials is reported, which relies on the preparation of polymeric core-shell capsules containing solutions of photochromic dyes in acidic phase-change materials. Upon changing the phase (solid or liquid) of the encapsulated medium, one of the two photochromic states of the system is selectively stabilized on demand, allowing for reversible interconversion between direct and reverse photochromism when thermally scanning through the melting temperature of the phase-change material. This strategy, which does not require the addition of external agents or chemical modification of the dyes, proved to be general for different spiropyran photochromes and to be applicable to the fabrication of a variety of functional materials by simply embedding the capsules obtained into a solid matrix of choice.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tubular CoFeP@CN as a Mott-Schottky catalyst with multiple adsorption sites for robust lithium-sulfur batteries

  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Du, Ruifeng
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Yi, Mingjie
  • Xiao, Ke
  • Yang, Dawei|||0000-0002-3842-8286
  • Zhang, Ting|||0000-0002-0317-9662
  • Wang, Xiang
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The shuttle effect and the sluggish reaction kinetics of lithium polysulfide (LiPS) seriously compromise the performance of lithium-sulfur batteries (LSBs). To overcome these limitations and enable the fabrication of robust LSBs, here the use of a Mott-Schottky catalyst based on bimetallic phosphide CoFeP nanocrystals supported on carbon nitride tubular nanostructures as sulfur hosts is proposed. Theoretical calculations and experimental data confirm that CoFeP@CN composites are characterized by a suitable electronic structure and charge rearrangement that allows them to act as a Mott-Schottky catalyst to accelerate LiPS conversion. In addition, the tubular geometry of CoFeP@CN composites facilitates the diffusion of Li ions, accommodates volume change during the reaction, and offers abundant lithiophilic/sulfiphilic sites to effectively trap soluble LiPS. Therefore, S@CoFeP@CN electrodes deliver a superior rate performance of 630 mAh g at 5 C, and remarkable cycling stability with 90.44% capacity retention over 700 cycles. Coin cells with high sulfur loading, 4.1 mg cm, and pouch cells with 0.1 Ah capacities are further produced to validate their superior cycling stability. In addition, it is demonstrated here that CoFeP@CN hosts greatly alleviate the often overlooked issues of low energy efficiency and serious self-discharging in LSBs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A High conductivity 1D π-d conjugated metal-organic framework with efficient polysulfide trapping-diffusion-catalysis in lithium-sulfur batteries, A High conductivity one-dimensional π-d conjugated metal-organic framework with efficient polysulfide trapping-diffusion-catalysis in lithium-sulfur batteries

  • Yang, Dawei|||0000-0002-3842-8286
  • Liang, Zhifu
  • Tang, PengYi|||0000-0002-2306-095X
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Tang, Mingxue|||0000-0002-7282-4100
  • Li, Qizhen
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Li, Junshan|||0000-0002-1482-1972
  • Heggen, Marc|||0000-0002-2646-0078
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Xu, Ming
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Chou, Shulei|||0000-0003-1155-6082
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The shuttling behavior and sluggish conversion kinetics of the intermediate lithium polysulfides (LiPS) represent the main obstructions to the practical application of lithium-sulfur batteries (LSBs). Herein, a 1D π-d conjugated metal-organic framework (MOF), Ni-MOF-1D, is presented as an efficient sulfur host to overcome these limitations. Experimental results and density functional theory calculations demonstrate that Ni-MOF-1D is characterized by a remarkable binding strength for trapping soluble LiPS species. Ni-MOF-1D also acts as an effective catalyst for S reduction during the discharge process and LiS oxidation during the charging process. In addition, the delocalization of electrons in the π-d system of Ni-MOF-1D provides a superior electrical conductivity to improve electron transfer. Thus, cathodes based on Ni-MOF-1D enable LSBs with excellent performance, for example, impressive cycling stability with over 82% capacity retention over 1000 cycles at 3 C, superior rate performance of 575 mAh g at 8 C, and a high areal capacity of 6.63 mAh cm under raised sulfur loading of 6.7 mg cm. The strategies and advantages here demonstrated can be extended to a broader range of π-d conjugated MOFs materials, which the authors believe have a high potential as sulfur hosts in LSBs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Atomically dispersed Fe in a C2N based catalyst as a sulfur host for efficient lithium-sulfur batteries

  • Liang, Zhifu
  • Yang, Dawei|||0000-0002-3842-8286
  • Tang, PengYi|||0000-0002-2306-095X
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Zhang, Yi
  • Llorca, Jordi|||0000-0002-7447-9582
  • Wang, Xiang
  • Li, Junshan|||0000-0002-1482-1972
  • Heggen, Marc|||0000-0002-2646-0078
  • David, Jérémy|||0000-0003-3219-149X
  • Dunin-Borkowski, Rafal E.|||0000-0001-8082-0647
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
Lithium-sulfur batteries (LSBs) are considered to be one of the most promising next generation energy storage systems due to their high energy density and low material cost. However, there are still some challenges for the commercialization of LSBs, such as the sluggish redox reaction kinetics and the shuttle effect of lithium polysulfides (LiPS). Here a 2D layered organic material, CN, loaded with atomically dispersed iron as an effective sulfur host in LSBs is reported. X-ray absorption fine spectroscopy and density functional theory calculations prove the structure of the atomically dispersed Fe/CN catalyst. As a result, Fe/CN-based cathodes demonstrate significantly improved rate performance and long-term cycling stability. Fe/CN-based cathodes display initial capacities up to 1540 mAh g at 0.1 C and 678.7 mAh g at 5 C, while retaining 496.5 mAh g after 2600 cycles at 3 C with a decay rate as low as 0.013% per cycle. Even at a high sulfur loading of 3 mg cm, they deliver remarkable specific capacity retention of 587 mAh g after 500 cycles at 1 C. This work provides a rational structural design strategy for the development of high-performance cathodes based on atomically dispersed catalysts for LSBs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Doping-mediated stabilization of copper vacancies to promote thermoelectric properties of Cu2-xS

  • Zhang, Yu|||0000-0002-0332-0013
  • Xing, Congcong|||0000-0001-7674-6720
  • Liu, Yu|||0000-0001-7313-6740
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Wang, Xiang
  • Li, Mengyao|||0000-0002-9082-7938
  • Xiao, Ke
  • Zhang, Ting|||0000-0002-0317-9662
  • Guardia, Pablo|||0000-0001-9076-4642
  • Lim, Khak Ho|||0000-0003-3116-8589
  • Moghaddam, Ahmad Ostovari
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Ibáñez, Maria|||0000-0001-5013-2843
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Copper chalcogenides are outstanding thermoelectric materials for applications in the medium-high temperature range. Among different chalcogenides, while CuSe is characterized by higher thermoelectric figures of merit, CuS provides advantages in terms of low cost and element abundance. In the present work, we investigate the effect of different dopants to enhance the CuS performance and also its thermal stability. Among the tested options, Pb-doped CuS shows the highest improvement in stability against sulfur volatilization. Additionally, Pb incorporation allows tuning charge carrier concentration, which enables a significant improvement of the power factor. We demonstrate here that the introduction of an optimal additive amount of just 0.3% results in a threefold increase of the power factor in the middle-temperature range (500-800 K) and a record dimensionless thermoelectric figure of merit above 2 at 880 K.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

NbSe2 meets C2N, a 2D-2D heterostructure catalysts as multifunctional polysulfide mediator in ultra-long-life lithium-sulfur batteries

  • Yang, Dawei|||0000-0002-3842-8286
  • Liang, Zhifu
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Botifoll, Marc|||0000-0002-4876-6393
  • Spadaro, Maria Chiara|||0000-0002-6540-0377
  • Chen, Qiulin
  • Li, Mengyao|||0000-0002-9082-7938
  • Ramon, Alberto
  • Moghaddam, Ahmad Ostovari
  • Llorca, Jordi|||0000-0002-7447-9582
  • Wang, Jiaao|||0000-0002-4944-4951
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Chou, Shulei|||0000-0003-1155-6082
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The shuttle effect and sluggish conversion kinetics of lithium polysulfides (LiPS) hamper the practical application of lithium-sulfur batteries (LSBs). Toward overcoming these limitations, herein an in situ grown CN@NbSe heterostructure is presented with remarkable specific surface area, as a Li-S catalyst and LiPS absorber. Density functional theory (DFT) calculations and experimental results comprehensively demonstrate that CN@NbSe is characterized by a suitable electronic structure and charge rearrangement that strongly accelerates the LiPS electrocatalytic conversion. In addition, heterostructured CN@NbSe strongly interacts with LiPS species, confining them at the cathode. As a result, LSBs cathodes based on CN@NbSe/S exhibit a high initial capacity of 1545 mAh g at 0.1 C. Even more excitingly, CN@NbSe/S cathodes are characterized by impressive cycling stability with only 0.012% capacity decay per cycle after 2000 cycles at 3 C. Even at a sulfur loading of 5.6 mg cm, a high areal capacity of 5.65 mAh cm is delivered. These results demonstrate that CN@NbSe heterostructures can act as multifunctional polysulfide mediators to chemically adsorb LiPS, accelerate Li-ion diffusion, chemically catalyze LiPS conversion, and lower the energy barrier for LiS precipitation/decomposition, realizing the "adsorption-diffusion-conversion" of polysulfides.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

ZnSe/N-doped carbon nanoreactor with multiple adsorption sites for stable lithium-sulfur batteries

  • Yang, Dawei|||0000-0002-3842-8286
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
  • Han, Xu|||0000-0001-8319-8830
  • Liang, Zhifu
  • Du, Ruifeng
  • Li, Mengyao|||0000-0002-9082-7938
  • Li, Junshan|||0000-0002-1482-1972
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Llorca, Jordi|||0000-0002-7447-9582
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Morante, Joan Ramon|||0000-0002-4981-4633
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
To commercially realize the enormous potential of lithium-sulfur batteries (LSBs) several challenges remain to be overcome. At the cathode, the lithium polysulfide (LiPS) shuttle effect must be inhibited and the redox reaction kinetics need to be substantially promoted. In this direction, this work proposes a cathode material based on a transition-metal selenide (TMSe) as both adsorber and catalyst and a hollow nanoreactor architecture: ZnSe/N-doped hollow carbon (ZnSe/NHC). It is here demonstrated both experimentally and by means of density functional theory that this composite provides three key benefits to the LSBs cathode: (i) A highly effective trapping of LiPS due to the combination of sulfiphilic sites of ZnSe, lithiophilic sites of NHC, and the confinement effect of the cage-based structure; (ii) a redox kinetic improvement in part associated with the multiple adsorption sites that facilitate the Li diffusion; and (iii) an easier accommodation of the volume expansion preventing the cathode damage due to the hollow design. As a result, LSB cathodes based on S@ZnSe/NHC are characterized by high initial capacities, superior rate capability, and an excellent stability. Overall, this work not only demonstrates the large potential of TMSe as cathode materials in LSBs but also probes the nanoreactor design to be a highly suitable architecture to enhance cycle stability.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Single-Atom Catalysts with Unsaturated Co-N2 Active Sites Based on a C2N 2D-Organic Framework for Efficient Sulfur Redox Reaction

  • Yang, Dawei|||0000-0002-3842-8286
  • Wang, Jiaao|||0000-0002-4944-4951
  • Lou, Chenjie
  • Li, Mengyao|||0000-0002-9082-7938
  • Zhang, Chaoqi|||0000-0002-0357-235X
  • Ramon, Alberto
  • Li, Canhuang
  • Tang, Mingxue|||0000-0002-7282-4100
  • Henkelman, Graeme|||0000-0002-0336-7153
  • Xu, Ming
  • Li, Junshan|||0000-0002-1482-1972
  • Llorca, Jordi|||0000-0002-7447-9582
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Mitlin, David
  • Zhou, Guangmin|||0000-0002-3629-5686
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
The lithium-sulfur battery (LSB) is a viable option for the next generation of energy storage systems. However, the shuttle effect of lithium polysulfides (LiPS) and the poor electrical conductivity of sulfur and lithium sulfides limit its deployment. Here, we report on a 2D-organic framework, C2N, with a high loading of low-coordination cobalt single atoms (Co-SAs/C2N) as an effective sulfur host in LSB cathodes. Experimental and computational results reveal that unsaturated Co-N2 active sites with an asymmetric electron distribution act as effective polysulfide traps, accommodating electrons from polysulfide ions to form strong Sx2--Co-N bonds. Additionally, charge transfer between LiPS and unsaturated Co-N2 active sites endows immobilized LiPS with low free energy and low electrochemical decomposition energy barriers, thus accelerating the kinetic conversion of LiPS. As a result, S@Co-SAs/C2N-based cathodes exhibit superior rate performance, impressive cycling stability, and good areal capacity at high sulfur loading, 2-fold that of commercial lithium-ion batteries. This work emphasizes the potential capabilities and promising prospects of single-atom catalysts with unsaturated coordination in LSBs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Highly Conductive Quasi-1D Hexagonal Chalcogenide Perovskite Sr8Ti7S21 with Efficient Polysulfide Regulation in Lithium-Sulfur Batteries

  • Yang, Dawei|||0000-0002-3842-8286
  • Han, Yanbing
  • Li, Mengyao|||0000-0002-9082-7938
  • Li, Canhuang
  • Bi, Wei
  • Gong, Qianhong
  • Zhang, Jie
  • Zhang, Jinglu
  • Zhou, Yingtang|||0000-0002-8678-295X
  • Gao, Han
  • Arbiol i Cobos, Jordi|||0000-0002-0695-1726
  • Shi, Zhifeng
  • Zhou, Guangmin|||0000-0002-3629-5686
  • Cabot i Codina, Andreu|||0000-0002-7533-3251
Lithium-sulfur batteries (LSBs) are regarded as one of the most promising candidates for next-generation energy storage systems. However, the commercialization of LSBs is still hindered by several technical issues, including the notorious polysulfide migration from the cathode to the anode and the sluggish sulfur conversion kinetics. Herein, a quasi-1D hexagonal chalcogenide perovskite, SrTiS, is demonstrated as an efficient sulfur host able to overcome these limitations. Experimental results and density functional theory calculations show SrTiS to offer strong lithium polysulfides (LiPS) binding through multiple bond formation. Besides, SrTiS effectively facilitates the kinetics of the LiPS redox reaction. As a result, S@SrTiS-based cathodes exhibit excellent initial capacities up to 1315 mAh g at 0.2C, impressive cycling stability with an average capacity decay rate of 0.08% per cycle over 400 cycles at 1C, and a high areal capacity of 6.58 mAh cm under a high sulfur loading of 6.5 mg cm. This work reveals the potential capabilities and promising prospects of chalcogenide perovskites in advancing LSBs technology.