Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 28
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Combinatorial screening of wide band-gap organic solar cell materials with open-circuit voltage between 1.1 and 1.4

  • Casademont-Viñas, Miquel
  • Capolat, Daniel
  • Quesada-Ramírez, Arianna
  • Reinfelds, Matiss
  • Trimmel, Gregor
  • Sanviti, Matteo
  • Martín, Jaime
  • Goñi, Alejandro R.
  • Kirchartz, Thomas
  • Campoy-Quiles, Mariano
[Abstract]: Wide band-gap organic solar cells are gaining interest due to their applications in emergent light-harvesting technologies such as underwater photovoltaics, multi-junction solar cells, or indoor photovoltaics. In this work, a combinatorial screening approach is used to explore binary combinations of three wide band-gap donors (PTQ10, PM6, and D18) and three wide band-gap acceptors (PMI-FF-PMI, O-IDFBR, and IO-4Cl) deposited from solution in two solvents (CB and CF). In total, 18 combinations are blade-coated with active layers exhibiting a thickness gradient generating solar cells with 12 different thicknesses. PTQ10:IO-4Cl and PTQ10:O-IDFBR are the most efficient blends with efficiencies of 7.31% and 6.87%, respectively. The voltage loss analysis shows that PTQ10-based devices exhibit the lowest non-radiative voltage losses, whereby the PTQ10:O-IDFBR combination has the lowest voltage loss of all studied blends, with a remarkably high open-circuit voltage (Voc) of 1.35 V. Due to their high performance and Voc, PTQ10:O-IDFBR devices were also studied for indoor light harvesting, achieving an efficiency of 22.6% and a Voc of 1.21 V under 560 lux indoor illumination. To the best of our knowledge, this indoor Voc value is the highest achieved in the field of indoor organic photovoltaics., The Spanish “Ministerio de Ciencia e Innovación (MICINN)” is gratefully acknowledged for its support through grant No. CEX2019-000917-S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Centre of Excellence program and the AEI/FEDER(UE) grants PGC2018-095411-B-I00 (RAINBOW), TED2021-131911B-I00, and PID2021-128924OB-I00 (ISOSCELLES). The authors also thank the Catalan agency AGAUR for grant 2021-SGR-00444. M. C. V. acknowledges an FPI fellowship (PRE2019-089855) from MICINN co-financed by the European Social Fund. M. C. V. and A. Q. also thank the PhD program in Materials Science from Universitat Autònoma de Barcelona in which both were enrolled. M. C. V. acknowledges Dr Benjamin Klingebiel and Mr Markus Hülsbeck for their help during EL and PL measurements, Mr Wilfried Reetz for his help during EQEPV measurements. Dr Markus Scharber is acknowledged for his insights in PMI-FF-PMI-based solar cells. Dr Alfonsina A. A. Torimtubun is acknowledged for her helpful discussions on device fabrication. M. R. and G. T. thank Birgit Ehmann, Colien Purkathofer, and Stefan Weber for synthesis of PMI-FF-PM, Generalitat de Catalunya; 2021-SGR-00444
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Design Rules for Polymer Blends with High Thermoelectric Performance

  • Zapata-Arteaga, Osnat
  • Marina, Sara
  • Zuo, Guangzheng
  • Xu, Kai
  • Dörling, Bernhard
  • Pérez, Luis Alberto
  • Reparaz, Juan Sebastian
  • Martín, Jaime
  • Kemerink, Martijn
  • Campoy-Quiles, Mariano
[Abstract] A combinatorial study of the effect of in-mixing of various guests on the thermoelectric properties of the host workhorse polymer poly[2,5-bis(3-tetradecylthiophen- 2-yl)thieno[3,2-b]thiophene] (PBTTT) is presented. Specifically, the composition and thickness for doped films of PBTTT blended with different polymers are varied. Some blends at guest weight fractions around 10–15% exhibit up to a fivefold increase in power factor compared to the reference material, leading to zT values around 0.1. Spectroscopic analysis of the charge-transfer species, structural characterization using grazing-incidence wide-angle X-ray scattering, differential scanning calorimetry, Raman, and atomic force microscopy, and Monte Carlo simulations are employed to determine that the key to improved performance is for the guest to promote long-range electrical connectivity and low disorder, together with similar highest occupied molecular orbital levels for both materials in order to ensure electronic connectivity are combined., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the Severo Ochoa’ Program for Centers of Excellence in R&D (No. CEX2019-000917-S) and projects PGC2018-095411- B-I00, PGC2018-094620-A-I00, and MAT2017-90024-P (TANGENTS)-EI/Fondo Europeo de Desarrollo Regional and from the European Research Council (ERC) under Grant Agreements Nos. 648901 and 963954. J.M. thanks Ministerio de Ciencia, Innovación y Universidades for the Ramón y Cajal contract. The authors are thankful to Dr. Agustín Mihi for access and support with the FTIR equipment. The authors acknowledge the European funding (European Regional Development Fund and European Social Fund). The authors thank Andrés Gómez Rodríguez from the Scanning Probe Microscopy Laboratory (ICMAB-CSIC) for a set of fine AFM measurements. GIWAXS experiments were performed at NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff. Finally, the authors acknowledge the support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unidad de Recursos de Información Científica para la Investigación (URICI). M.K. thanks the Carl Zeiss Foundation for financial support. G.Z. acknowledges the support from Alexander von Humboldt Foundation
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Polymorphism in Non-Fullerene Acceptors Based on Indacenodithienothiophene

  • Marina, Sara
  • Scaccabarozzi, Alberto D.
  • Gutiérrez Fernández, Edgar
  • Solano, Eduardo
  • Khirbat, Aditi
  • Ciammaruchi, Laura
  • Iturrospe, Amaia
  • Balzer, Alex
  • Yu, Liyang
  • Gabirondo, Elena
  • Monnier, Xavier
  • Sardón, Haritz
  • Anthopoulos, Thomas D.
  • Caironi, Mario
  • Campoy-Quiles, Mariano
  • Müller, Christian
  • Cangialosi, Daniele
  • Stingelin, Natalie
  • Martín, Jaime
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] Organic solar cells incorporating non-fullerene acceptors (NFAs) have reached remarkable power conversion efficiencies of over 18%. Unlike fullerene derivatives, NFAs tend to crystallize from solutions, resulting in bulk heterojunctions that include a crystalline acceptor phase. This must be considered in any morphology-function models. Here, it is confirmed that high-performing solution-processed indacenodithienothiophene-based NFAs, i.e., ITIC and its derivatives ITIC-M, ITIC-2F, and ITIC-Th, exhibit at least two crystalline forms. In addition to highly ordered polymorphs that form at high temperatures, NFAs arrange into a low-temperature metastable phase that is readily promoted via solution processing and leads to the highest device efficiencies. Intriguingly, the low-temperature forms seem to feature a continuous network that favors charge transport despite of a poorly order along the π–π stacking direction. As the optical absorption of the structurally more disordered low-temperature phase can surpass that of the more ordered polymorphs while displaying comparable—or even higher—charge transport properties, it is argued that such a packing structure is an important feature for reaching highest device efficiencies, thus, providing guidelines for future materials design and crystal engineering activities., This work was supported by the Ministerio de Ciencia e Innovacion/FEDER (under Ref. PGC2018-094620-A-I00 and PGC2018-095411-B-I00, CEX2019-000917-S, and PGC2018-095411-B-100) and the Basque Country Government (Ref. PIBA19-0051). S.M. is grateful to POLYMAT for the doctoral scholarship. The authors thank A. Arbe, A. Alonso-Mateo, and L. Hueso for their support and access to characterization tools. The authors also thank the technical and human support provided by SGIker of UPV/EHU and European funding (ERDF and ESF). GIWAXS experiments were performed at BL11 NCD-SWEET beamline at ALBA Synchrotron (Spain) with the collaboration of ALBA staff. J.M and E.F.-G. acknowledge support through the European Union's Horizon 2020 research and innovation program, H2020-FETOPEN 01-2018-2020 (FET-Open Challenging Current Thinking), “LION-HEARTED,” Grant Agreement No. 828984. J.M and N.S. would like to thank the financial support provided by the IONBIKE RISE project, which received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 823989. N.S., A.K., and A.B. furthermore are grateful to the U.S. National Science Foundation (NSF) for support via Project No. 1905901 within NSF's Division of Materials Research. A.S. and M.C. acknowledge financial support by the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program “HEROIC,” Grant Agreement No. 638059. This work was partially carried out at Polifab, the micro- and nanotechnology center of the Politecnico di Milano. C.M. thanks the Knut and Alice Wallenberg Foundation for funding through the project “Mastering Morphology for Solution-borne Electronics.” A.I. thanks MICINN for a Personal Técnico de Apoyo contract (PTA2017-14359-I) and gratefully acknowledge the financial support of the Basque Government (Research Groups IT-1175-19) and the MICINN (PGC2018-094548-B-I00, MCIU/AEI/FEDER, UE. Funding for open access charge: Universidade da Coruña/CISUG., Gobierno Vasco; PIBA19-0051, Gobierno Vasco; IT-1175-19, Estados Unidos. National Science Foundation; 1905901
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Comparing the Microstructure and Photovoltaic Performance of 3 Perylene Imide Acceptors With Similar Energy Levels but Different Packing Tendencies

  • Adel, Rana
  • Gala, Elena
  • Alonso Navarro, Matías Jesús
  • Gutiérrez Fernández, Edgar
  • Martín, Jaime
  • Stella, Marco
  • Martínez-Ferrero, Eugenia
  • De la Peña, Alejandro
  • Harbuzaru Harbuzaru, Alexandra
  • Ramos, M.Mar
  • Ponce Ortiz, Rocío
  • Segura, José L.
  • Campoy-Quiles, Mariano
[Abstract] While it is widely recognized that microstructure plays an important role in the performance of organic photovoltaics (OPV), systematic studies are often challenging, as varying the molecular packing through typical chemical means (such as sidechain tuning) often affects the molecular energy levels, thus preventing a clear correlation. In this work we present the synthesis of three perylene imide (PI) based electron acceptors with almost identical energy levels, but distinct packing tendencies. We confirm our initial hypothesis by measuring solution and solid-state absorption, and cyclic voltammetry as well as characterizing the films by grazing incidence wide angle X-ray scattering (GIWAXS). In a second step, we repeat the characterization of the three materials in blends with two polymer donors, namely PCDTBT or PBDBT, whose energy levels are well aligned with those of the PI acceptors, and which, additionally, exhibit different degrees of structural order. We show how the initial strong difference between acceptors is partially blurred in blends, but still critical. Finally, we correlate our structural data with OPV devices made with the corresponding six blends. Our data suggest that a good donor acceptor marriage should ensure good energy alignment but also exhibit complementary crystallization tendencies of the two components., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the Severo Ochoa Program for Centers of Excellence in R&D (No. CEX2019-000917-S), and projects PGC2018-095411-B-I00, PID2019-106268GB-C33 and PID2019-110305GB-I00, as well as the European Commission through the Horizon 2020 Marie Sklodowska-Curie ITN Programme, SEPOMO, Grant Number: 722651, and the UCM (INV.GR.00.1819.10759). E. G. specially acknowledges Comunidad de Madrid and Universidad Complutense de Madrid for a post-doctoral contract (CT20/19-CT21/19/PEJD-2018-POST/IND-8661PAI). M. J. A. N. acknowledges URJC for a post-doctoral contract. R. P. O. and A. H. also acknowledge support from Junta de Andalucía (project UMA18-FEDERJA-080). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI), Universidad Complutense de Madrid; INV.GR.00.1819.10759, Universidad Complutense de Madrid; CT20/19-CT21/19/PEJD-2018-POST/IND-8661PAI, Junta de Andalucía; UMA18-FEDERJA-080
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Using Spatial Confinement to Decipher Polymorphism in the Organic Semiconductor p-DTS(FBTTh2)2

  • Marina, Sara
  • Martín, Jaime
[Abstrac]: Many molecular semiconductors show a pronounced polymorphism; i.e. they can adopt different crystal arrangements depending, e.g., on temperature, pressure, and selected solidification pathways. This renders reliable fabrication of molecular semiconductor devices challenging, as minute changes in processing can lead to numerous structures and, hence, optoelectronic responses. Here, we demonstrate using the example of p-DTS(FBTTh₂)₂ that spatial confinement at the nanoscale can be exploited to detect specific polymorphs and the conditions under they form. A new polymorph exhibiting a higher charge-carrier mobility compared to previously reported p-DTS(FBTTh₂)₂ crystal forms is found at elevated temperatures and high degree of confinement, illustrating the benefit of our approach and promising that spatial confinement will find wide- spread application to understand and control polymorph formation in organic semiconductors., This work is supported by MCINN/FEDER (under ref. PID2021- 126243NB-I00 and PGC2018-095411-B-I00) and Xunta de Galicia (Proyectos de Consolidacio´n ref. ED431F 2021/009). J. M. thanks MCINN for the Ramo´n y Cajal contract. N. S. in addition gratefully acknowledges support from the IdEx Bordeaux Excellence program (ANR-10-IDEX-03-02). The authors would like to acknowledge the financial support provided by the IONBIKE RISE project. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 823989. All authors acknowledge the synchrotron radiation source ELETTRA (Trieste, Italy) for providing beam time and the staff from the SAXS beamline for support. This work was authored in part by the National Renewable Energy Laboratory, operated by Alliance for Sustainable Energy, LLC, for the U. S. Department of Energy (DOE) under Contract No. DE-AC36- 08GO28308. Funding for TRMC measurements was provided by the Solar Photochemistry Program, Division of Chemical Sciences, Geosciences, and Biosciences, Office of Basic Energy Sciences, U. S. Department of Energy. The views expressed in the article do not necessarily represent the views of the DOE or the U. S. Government. The U. S. Government retains and the publisher, by accepting the article for publication, acknowledges that the U. S. Government retains a nonexclusive, paidup, irrevocable, worldwide license to publish or reproduce the published form of this work, or allow others to do so, for U. S. Government purposes. J. M. thanks MICINN/FEDER for the Grant PID2021-126243NB-I00., Xunta de Galicia; ED431F 2021/009
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ferroelectricity-free lead halide perovskites

  • Gómez Rodríguez, Andrés
  • Wang, Qiong
  • Goñi, Alejandro R.
  • Campoy Quiles, Mariano
  • Abate, Antonio
Direct piezoelectric force microscopy (DPFM) is employed to examine whether or not lead halide perovskites exhibit ferroelectricity. Compared to conventional piezoelectric force microscopy, DPFM is a novel technique capable of measuring piezoelectricity directly. This fact is fundamental to be able to examine the existence of ferroelectricity in lead halide perovskites, an issue that has been under debate for several years. DPFM is used to detect the current signals, i.e. changes in the charge distribution under the influence of the scan direction and applied force of the atomic force microscope (AFM) tip in contact mode. For comparison, (i) we use DPFM on lead halide perovskites and well-known ferroelectric materials (i.e. periodically poled lithium niobate and lead zirconate titanate); and (ii) we conduct parallel experiments on MAPbI3 films of different grain sizes, film thicknesses, substrates, and textures using DPFM as well as piezoelectric force microscopy (PFM) and electrostatic force microscopy (EFM). In contrast to previous work that claimed there were ferroelectric domains in MAPbI3 perovskite films, our work shows that the studied perovskite films Cs0.05(FA0.83MA0.17)0.95Pb(I0.83Br0.17)3 and MAPbI3 are ferroelectricity-free. The observed current profiles of lead halide perovskites possibly originate from ion migration that happens under an applied electrical bias and in strained samples under mechanical stress. This work provides a deeper understanding of the fundamental physical properties of the organic–inorganic lead halide perovskites and solves a longstanding dispute about their non-ferroelectric character: an issue of high relevance for optoelectronic and photovoltaic applications., The authors gratefully acknowledge the Spanish Ministerio de Economía, Industria y Competitividad for its support through Grant No. MAT2015-70850-P, PGC2018-095411-B-I00 and SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program and through Grant MAT2015-70850-P (HIBRI2). We thank the financial support from the European Research Council through project ERC CoG648901. We thank the Program under grant agreement No. 654360 within the framework of NFFA-Europe that benefits us with access to ICMAB-CSIC in Barcelona. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). A. A. thanks the National Natural Science Foundation of China under the grant number 21750110442., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reduction of the Lattice Thermal Conductivity of Polymer Semiconductors by Molecular Doping

  • Zapata Arteaga, Osnat
  • Perevedentsev, Aleksandr
  • Marina, Sara
  • Martín, Jaime
  • Reparaz, J. S.
  • Campoy Quiles, Mariano
Here we show that molecular doping of polymer thermoelectrics increases the electrical conductivity while reducing the thermal conductivity. A high-throughput methodology based on annealing and doping gradients within individual films is employed to self-consistently analyze and correlate electrical and thermal characteristics for the equivalent of >100 samples. We focus on the benchmark material system poly(2,5- bis(3-alkylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT) doped with molecular acceptor 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ). The thermal conductivity of neat PBTTT films is dominated by the degree of crystallinity, with thermal percolation observed for annealing temperatures >170 °C. Upon doping the samples with a relatively low amount of F4TCNQ (anion content <1 mol %), the thermal conductivity exhibits a two-fold reduction without compromising the crystalline quality, which resembles the effect of alloy scattering observed in several inorganic systems. The analysis of the relation between thermal and electrical conductivities shows that thermal transport is dominated by a doping-induced reduced lattice contribution., We acknowledge financial support from the Spanish Ministry of Science and Innovation through projects PGC2018-095411- B-I00 and MAT2017-90024-P (TANGENTS)-EI/FEDER, UE projects; the Generalitat de Catalunya through grants 2017SGR488 and AGAUR 2018 PROD 00191; and from the European Research Council (ERC) under grant agreement no. 648901. O.Z.-A. acknowledges CONACYT-SENER for his Ph.D. scholarship (no. 472571). J.M. thanks MCIU for the Ramon y Cajal contract and grant PGC2018-094620-A-I00. ́ We thank Dr. Agusti ́ n Mihi for the access to and support with the FTIR equipment. We acknowledge the technical and human support provided by SGIker of UPV/EHU and European funding (ERDF and ESF). We thank Andreś Gomez Rodri ́ ́ guez from the Scanning Probe Microscopy Laboratory (ICMAB-CSIC) for a set of AFM measurements. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A setup to measure the Seebeck coefficient and electrical conductivity of anisotropic thin-films on a single sample

  • Dörling, Bernhard
  • Zapata Arteaga, Osnat
  • Campoy Quiles, Mariano
This work documents an all-in-one custom setup, that allows to measure the in-plane Seebeck coefficients and electrical conductivities of anisotropic thin film samples close to room temperature. Both pairs, Sk,σk, and S⊥ and σ⊥ can be measured using four contacts on the same sample, reducing measurement time and minimizing potential sources of error due to aggregating data from several distinct samples. The setup allows to measure the electrical conductivity of isotropic samples using the well-known van der Pauw method. For samples with in-plane anisotropy, the two components σk and σ⊥ can be extracted from the same type of measurements by performing additional calculations. Using the same contacts, the Seebeck coefficient along one direction is measured using a differential state-state method. After rotating the sample by 90◦ , the orthogonal Seebeck component can be measured. In order to show the generality of the method, we measure different types of samples, from metal references to oriented doped conjugated polymers., The authors would like to thank José P. Jurado for helpful discussions and Rafael León for his help designing and machining the sample holder. The authors acknowledge the financial support from the Spanish Ministry of Science and Innovation through the “Severo Ochoa” Program for Centers of Excellence in R&D (Grant No. SEV-2015-0496 and Grant No. PGC2018-095411-B-I00), from the Generalitat de Catalunya, through Grant No. AGAUR 2018 PROD 00191, and from the European Research Council (ERC), under Grant Agreement No. 648901. O.Z.-A. acknowledges CONACYTSENER for his Ph.D. scholarship (Grant No. 472571)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure dependent photostability of ITIC and ITIC-4F†

  • Ciammaruchi, Laura
  • Zapata Arteaga, Osnat
  • Gutiérrez Fernández, Edgar
  • Martín, Jaime
  • Campoy Quiles, Mariano
Strong synthetic and engineering efforts have taken the efficiency of non-fullerene acceptor (NFA) based organic solar cells above 18% in a few years. Nonetheless, a deep understanding of the fundamental properties of this class of molecules is still missing. Here, we systematically investigated the morphological properties of two high efficient indacenodithienothiophene-based NFAs – namely ITIC and ITIC-4F – in order to correlate the hydrogen/fluorination substitutions with the materials structural and stability properties. We confirm that each NFA structurally evolves with increasing temperature into several polymorphs, identifying through spectroscopy their corresponding narrow temperature ranges. We demonstrate that the materials’ response to accelerated stress tests (ASTs) is both substitution and polymorph dependent. ASTs underlined that the most vulnerable molecular segment corresponds to the thienothiophene C[double bond, length as m-dash]C bond along the central backbone, together with the C[double bond, length as m-dash]C linkage between the electron-rich donor and the electron-deficient acceptor moieties, with a degradation process triggered by oxygen and light. ITIC-4F showed lower oxidation capability and a higher bond strength retaining effect compared to ITIC. Lastly, the AST approach employed here allowed for the extrapolation of morphological and stability-related features within a high-throughput framework, and can be considered as a valuable methodological tool for future stability-related studies., The authors would like to thank Dr Tommaso Salzillo and Dr Valentina Bulova for very fruitful scientific discussions. The authors kindly acknowledge the financial support from Ministerio de Economía y Competitividad of Spain through the “Severo Ochoa” Programme for Centres of Excellence in R&D and projects PGC2018-095411-B-I00 and PGC2018-094620-A-I00, as well as the European Research Council (ERC) under grant agreement no. 648901., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Correlating the Phase Behavior with the Device Performance in Binary Poly-3-hexylthiophene: Nonfullerene Acceptor Blend Using Optical Probes of the Microstructure

  • Rezasoltani, Elham
  • Guilbert, Anne A. Y.
  • Yan, Jun
  • Rodríguez Martínez, Xabier
  • Azzouzi, Mohammed
  • Eisner, Flurin
  • Tuladhar, Sachetan M.
  • Hamid, Zeinab
  • Wadsworth, Andrew
  • McCulloch, Iain
  • Campoy Quiles, Mariano
  • Nelson, Jenny
The performance of photovoltaic devices based on blends of conjugated polymers with nonfullerene acceptors depends on the phase behavior and microstructure of the binary, which in turn depends on the chemical structures of the molecular components and the blend composition. We investigate the correlation between the molecular structure, composition, phase behavior, and device performance of a model system consisting of semicrystalline poly-3-hexylthiophene (P3HT) as the donor polymer and three nonfullerene acceptors, two of which (O-IDTBR/EH-IDTBR) have a planar core with different side chains and one (O-IDFBR) of which has a twisted core. We combine differential scanning calorimetry with optical measurements including UV–Vis spectroscopy, photoluminescence, spectroscopic ellipsometry, and Raman spectroscopy and photovoltaic device performance measurements, all at varying blend composition. For P3HT:IDTBR blends, the crystallinity of polymer and acceptor is preserved over a wide composition range and the blend displays a eutectic phase behavior, with the optimum solar cell composition lying close to the eutectic composition. For P3HT:IDFBR blends, increasing acceptor content disrupts the polymer crystallinity, and the optimum device composition appears to be limited by polymer connectivity rather than being linked to the eutectic composition. The optical probes allow us to probe both the crystalline and amorphous phases, clearly revealing the compositions at which component mixing disrupts crystallinity., E.R. is grateful to the Fonds de Recherche du Quebec-Nature et technologies (FRQNT) for a postdoctoral fellowship and acknowledges the financial support from the European Cooperation in Science and Technology. J.N. acknowledges the financial support from the Engineering and Physical Science Research Council (grants nos. EP/P005543/1, EP/ R023581/1, and EP/P032591/1) and from the European Research Council for funding (grant agreement no. 742708). J.N. and E.R. thank the Helmholtz Foundation for a Helmholtz International Fellow Award. A.A.Y.G. thanks the EPSRC for a postdoctoral fellowship award (grant no. EP/P00928X/1). The authors at ICMAB would like to acknowledge the financial support from the Spanish Ministry of Economy, Industry and Competitiveness through the “Severo Ocho” Program for Centers of Excellence in R&D (SEV-2015-0496) and project reference PGC2018-095411-B-I00 as well as the European Research Council (ERC) under grant agreement no. 648901. I.M. acknowledges funding from KAUST, as well as EPSRC Project EP/G037515/1, EP/M005143/1, ECFP7 Project SC2 (610115), and EP/N509486/1 for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydroxypropyl Cellulose Adhesives for Transfer Printing of Carbon Nanotubes and Metallic Nanostructures

  • Dore, Camilla
  • Dörling, Bernhard
  • García Pomar, Juan Luis
  • Campoy Quiles, Mariano
  • Mihi, Agustín
Transfer printing is one of the key nanofabrication techniques for the large‐scale manufacturing of complex device architectures. It provides a cost‐effective and high‐throughput route for the integration of independently processed materials into spatially tailored architectures. Furthermore, this method enables the fabrication of flexible and curvilinear devices, paving the way for the fabrication of a new generation of technologies for optics, electronics, and biomedicine. In this work, hydroxypropyl cellulose (HPC) membranes are used as water soluble adhesives for transfer printing processes with improved performance and versatility compared to conventional silicone alternatives. The high‐water solubility and excellent mechanical properties of HPC facilitate transfer printing with high yield for both metal and carbon nanotubes (CNTs) inks. In the case of metal inks, crack‐free stripping of silver films and the simple fabrication of Moiré Plasmonic architectures of different geometries are demonstrated. Furthermore, HPC membranes are used to transfer print carbon nanotube films with different thicknesses and up to 77% transparency in the visible and near infrared region with potential applications as transparent conductive substrates. Finally, the use of prepatterned HPC membranes enables nanoscale patterning of CNT with feature resolution down to 1 µm., This project received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 637116, ENLIGHTMENT and No. 648901) and the Generalitat de Catalunya program AGAUR 2017‐SGR‐00488. The Spanish Ministerio de Ciencia e Innovación is gratefully acknowledged for its support through Grant Nos. PGC2018‐095411‐B‐I00, PID2019‐106860GB‐I00, and SEV‐2015‐0496, in the framework of the Spanish Severo Ochoa Centre of Excellence program. This work was done in the framework of the doctorate in Materials Science of the Autonomous University of Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Predicting the photocurrent–composition dependence in organic solar cells

  • Rodríguez Martínez, Xabier
  • Pascual San José, Enrique
  • Fei, Zhuping
  • Heeney, Martin
  • Guimerà, Roger
  • Campoy Quiles, Mariano
Dataset complementario en Digital.CSIC: https://digital.csic.es/handle/10261/223231 (10.20350/digitalCSIC/12719), The continuous development of improved non-fullerene acceptors and deeper knowledge of the fundamental mechanisms governing performance underpin the vertiginous increase in efficiency witnessed by organic photovoltaics. While the influence of parameters like film thickness and morphology are generally understood, what determines the strong dependence of the photocurrent on the donor and acceptor fractions remains elusive. Here we approach this problem by training artificial intelligence algorithms with self-consistent datasets consisting of thousands of data points obtained by high-throughput evaluation methods. Two ensemble learning methods are implemented, namely a Bayesian machine scientist and a random decision forest. While the former demonstrates large descriptive power to complement the experimental high-throughput screening, the latter is found to predict with excellent accuracy the photocurrent–composition phase space for material systems outside the training set. Interestingly, we identify highly predictive models that only employ the materials band gaps, thus largely simplifying the rationale of the photocurrent–composition space., This work was supported by the Spanish Ministerio de Ciencia e Innovación under Grants PGC2018-095411-B-I00, FIS2016-78904-C3-1-P, and SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence. We acknowledge financial support from the European Research Council through project ERC CoG 648901 and the H2020 Marie Curie actions through the SEPOMO project (grant number 722651). X. R.-M., E. P.-S.-J. and M. C.-Q. thank Dr Bernhard Dörling for designing the doctor blade controller and Mr Martí Gibert-Roca for designing the multiplexer/switcher. X. R.-M. acknowledges the departments of Physics, Chemistry and Geology of the Autonomous University of Barcelona (UAB) as coordinators of the PhD program in Materials Science. M. H. acknowledges the Royal Society and the Wolfson Foundation. The authors thank Dr Mathieu Linares and Dr Jasper Michels for inspiring discussions at the early stages of this work. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparing different geometries for photovoltaic-thermoelectric hybrid devices based on organics

  • Jurado, José Piers
  • Dörling, Bernhard
  • Zapata Arteaga, Osnat
  • Goñi, Alejandro R.
  • Campoy Quiles, Mariano
Coupling thermoelectrics (TE) with photovoltaics (PV) has emerged as an approach to solid-state solar harvesting, directly converting light and infrared heat into electricity. In this work, we compare PV-TE hybrid devices based on organic semiconductors in three different geometries: a reflection geometry, a non-contact transmission geometry, and a contact transmission geometry. The temperature rises of films of common organic thermoelectric materials, including poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), single-walled carbon nanotubes (swCNT), and poly[2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene] (PBTTT), were measured in configurations representative of the proposed geometries. Because organic semiconductors possess broadband light absorption and low thermal conductivities, a significant rise in temperature was observed under illumination for all geometries. We find, however, that the best configuration is, in fact, the transmission contact mode because it sums two effects. Operating under 1 sun illumination, the temperature of a commercial organic PV module increased by ≈30 K, which leads to an enhancement in OPV performance compared to room temperature. After attaching a thermoelectric to the OPV module, losses from convection are reduced, and the OPV module heats up even more, further increasing its efficiency while additionally enabling thermoelectric generation. Finally, we calculate theoretical thermoelectric efficiencies for the materials and their respective power densities., The authors acknowledge financial support from the Spanish Ministry Science and Innovation through the “Severo Ochoa” Program for Centers of Excellence in R&D SEV-2015-0496 (FUNMAT) and CEX2019-000917-S (FUNFUTURE), and PGC2018-095411-B-I00 (RAINBOW) projects; from the Generalitat de Catalunya through grants 2017SGR488 and AGAUR 2018 PROD 00191; and from the European Research Council (ERC) under grant agreement no. 648901. This project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 713673. J. P. J. has received financial support through the “la Caixa” INPhINIT Fellowship Grant for Doctoral studies at Spanish Research Centers of Excellence (Grant code: LCF/BQ/IN17/11620035), “la Caixa” Banking Foundation (ID100010434), Barcelona, Spain. O. Z. A. acknowledges CONACYT-SENER for his PhD scholarship (no. 472571). J. P. J. acknowledges the departments of Physics, Chemistry and Geology of the Autonomous University of Barcelona (UAB) as coordinators of the PhD programme in Materials Science. The authors thank Dr A. Roig, Dr A. Laromaine and Dr D. Abol-Fotouh (ICMAB-CSIC) for the CNT:cellulose sample preparation and fruitful discussions. The authors thank Dr Aleksandr Perevedentsev for his help with sample preparation, and Mr Pau Molet for his help with the FTIR measurements. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Heteroleptic Ruthenium(II) Complexes with 2,2′-Bipyridines Having Carbonitriles as Anchoring Groups for ZnO Surfaces: Syntheses, Physicochemical Properties, and Applications in Organic Solar Cells, Asymmetric Ruthenium(II) Complexes with 2,2’- Bipyridines Containing Carbonitriles as Anchoring Groups for ZnO Surfaces: Syntheses, Physicochemical Properties and Applications in Organic Solar Cells

  • Salomón, Fernando F.
  • Vega, Nadia C.
  • Jurado, José Piers
  • Morán Vieyra, Faustino E.
  • Tirado, Mónica
  • Comedi, David
  • Campoy Quiles, Mariano
  • Cattaneo, Mauricio
  • Katz, Néstor E.
Heteroleptic ruthenium (II) complexes were used for sensitizing ZnO surfaces in organic solar cells (OSCs) as mediators with photoactive layers. The complexes [Ru(4,4′-X2-bpy)(Mebpy-CN)2]2+ (with X = −CH3, −OCH3 and −N(CH3)2; bpy = 2,2′-bipyridine; Mebpy-CN = 4-methyl-2,2′-bipyridine-4′-carbonitrile) were synthesized and studied by analytical and spectroscopical techniques. Spectroscopic, photophysical, and electrochemical properties were tuned by changing the electron-donating ability of the -X substituents at the 4,4′-positions of the bpy ring and rationalized by quantum mechanical calculations. These complexes were attached through nitrile groups to ZnO as interfacial layer in an OSC device with a PBDB-T:ITIC photoactive layer. This modified inorganic electron transport layer generates enhancement in photoconversion of the solar cells, reaching up to a 23% increase with respect to the unsensitized OSCs. The introduction of these dyes suppresses some degradative reactions of the nonfullerene acceptor due to the photocatalytic activity of zinc oxide, which was maintained stable for about 11 months. Improving OSC efficiencies and stabilities can thus be achieved by a judicious combination of new inorganic and organic materials., The authors thank CONICET (Grant PIP-2015-098), FONCyT (Grant PICT-2016-0553), and UNT (Grant PIUNT 26D/620) for financial support. F.F.S. thanks CONICET for a graduate fellowship. N.C.V., M.T., D.C., F.E.M.V., M.C., and N.E.K. are Members of the Research Career (CONICET). J.P.J. and M.C.Q. acknowledge financial support from the Spanish Ministry Science and Innovation through the “Severo Ochoa” Program for Centers of Excellence in R&D SEV-2015-0496 (FUNMAT) and CEX2019-000917-S (FUNFUTURE) and PGC2018-095411-B-I00 (RAINBOW) projects. This project received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 713673. J.P.J. received financial support through the “la Caixa” INPhINIT Fellowship Grant for Doctoral studies at Spanish Research Centers of Excellence (Grant code: LCF/BQ/IN17/ 11620035), “la Caixa” Banking Foundation (ID100010434), Barcelona, Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Accelerating organic solar cell material’s discovery: high-throughput screening and big data

  • Rodríguez Martínez, Xabier
  • Pascual San José, Enrique
  • Campoy Quiles, Mariano
The discovery of novel high-performing materials such as non-fullerene acceptors and low band gap donor polymers underlines the steady increase of record efficiencies in organic solar cells witnessed during the last years. Nowadays, the resulting catalogue of organic photovoltaic materials is becoming unaffordably vast to be evaluated following classical experimentation methodologies: their requirements in terms of human workforce time and resources are prohibitively high, which rest momentum to the evolution of the organic photovoltaic technology. As a result, high-throughput experimental and computational methodologies are fostered to leverage their inherently high exploratory paces and accelerate novel material’s discovery. In this review, we present some of the computational (pre)screening approaches performed prior to experimentation to select the most promising molecular candidates from the available materials libraries or, alternatively, generate molecules beyond human intuition. Then, we outline the main high-throuhgput experimental screening and characterization approaches with application in organic solar cells, namely those based on lateral parametric gradients (measuring-intensive) and on automated device prototyping (fabrication-intensive). In both cases, experimental datasets are generated at unbeatable paces, which notably enhance big data readiness. Herein, machine-learning algorithms find a rewarding application niche to retrieve quantitative structure-activity relationships and extract molecular design rationale, which are expected to keep the material’s discovery pace up in organic photovoltaics., This work was supported by the Spanish Ministry of Science and Innovation through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE, CEX2019-000917-S) and project reference PGC2018-095411-B-I00. The authors acknowledge financial support from the European Research through project ERC CoG 648901, and support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). The authors thank Prof. C. Brabec and Dr. J. Hauch for fruitful discussions on the topics of this review. The table of contents image and Figure 10 in the manuscript have been designed using freely available resources from Flaticon.com., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polymorphism in non-fullerene acceptors based on indacenodithienothiophene

  • Marina, Sara
  • Scaccabarozzi, Alberto D.
  • Gutiérrez-Fernández, Edgar
  • Solano, Eduardo
  • Khirbat, Aditi
  • Ciammaruchi, Laura
  • Iturrospe, Amaia
  • Balzer, Alex
  • Yu, Liyang
  • Gabirondo, Elena
  • Monnier, Xavier
  • Sardón, Haritz
  • Anthopoulos, Thomas D.
  • Caironi, Mario
  • Campoy Quiles, Mariano
  • Müller, Christian
  • Cangialosi, Daniele
  • Stingelin, Natalie
  • Martín, Jaime
Organic solar cells incorporating non-fullerene acceptors (NFAs) have reached remarkable power conversion efficiencies of over 18%. Unlike fullerene derivatives, NFAs tend to crystallize from solutions, resulting in bulk heterojunctions that include a crystalline acceptor phase. This must be considered in any morphology-function models. Here, it is confirmed that high-performing solution-processed indacenodithienothiophene-based NFAs, i.e., ITIC and its derivatives ITIC-M, ITIC-2F, and ITIC-Th, exhibit at least two crystalline forms. In addition to highly ordered polymorphs that form at high temperatures, NFAs arrange into a low-temperature metastable phase that is readily promoted via solution processing and leads to the highest device efficiencies. Intriguingly, the low-temperature forms seem to feature a continuous network that favors charge transport despite of a poorly order along the π–π stacking direction. As the optical absorption of the structurally more disordered low-temperature phase can surpass that of the more ordered polymorphs while displaying comparable—or even higher—charge transport properties, it is argued that such a packing structure is an important feature for reaching highest device efficiencies, thus, providing guidelines for future materials design and crystal engineering activities., This work is supported by the Ministerio de Ciencia e Innovacion/FEDER (under Ref. PGC2018-094620-A-I00 and PGC2018-095411-B-I00, CEX2019-000917-S and PGC2018- 095411-B-100) and the Basque Country Government (Ref. PIBA19-0051). S.M. is grateful to POLYMAT for the doctoral scholarship. The authors thank A. Arbe, A. Alonso-Mateo, L. Hueso for their support and access to characterization tools. The authors also thank the technical and human support provided by SGIker of UPV/EHU and European funding (ERDF and ESF). GIWAXS experiments were performed at BL11 NCD-SWEET beamline at ALBA Synchrotron (Spain) with the collaboration of ALBA staff. J.M and E.F.-G. acknowledge support through the European Union's Horizon 2020 research and innovation program, H2020-FETOPEN 01- 2018-2020 (FET-Open Challenging Current Thinking), ‘LION-HEARTED', grant agreement n. 828984. J.M and N.S. would like to thank the financial support provided by the IONBIKE RISE project, which has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 823989. N.S. and A.K. and A.B. furthermore are grateful to the U.S. National Science Foundation (NSF) for support via project # 1905901 within NSF’s Division of Materials Research. A. S. and M. C. acknowledge financial support by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program “HEROIC,” grant agreement 638059. This work was partially carried out at Polifab, the micro- and nanotechnology center of the Politecnico di Milano. .C.M. thanks the Knut and Alice Wallenberg Foundation for funding through the project “Mastering Morphology for Solution-borne Electronics”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Soluble alkali-metal carbon nanotube salts for n-type thermoelectric composites with improved stability

  • Dörling, Bernhard
  • Rodríguez Martínez, Xabier
  • Álvarez Corzo, Ivan
  • Reparaz, J. S.
  • Campoy Quiles, Mariano
We present a method to dissolve carbon nanotubes that simultaneously allows to prepare n-doped films. These films are composed of thinner bundles of longer tubes when compared to films prepared using surfactants and sonication. Their negative Seebeck coefficient and high electrical conductivity make them good candidates for thermoelectric applications. We investigate their stability in air by aging them at elevated temperatures, showing stabilities over 500 h, which is further improved by the use of crown ethers. Finally, we demonstrate the usefulness of the prepared materials by fabricating an organic thermoelectric generator comprising 40 legs., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the “Severo Ochoa” Program for Centers of Excellence in R&D (No. CEX2019-000917-S), Nos. PGC2018-095411-B-I00 and MAT2017-90024-P (TANGENTS)-EI/FEDER; from the Generalitat de Catalunya and European Union (FEDER) through AGAUR 2018 PROD 00191; and from the European Research Council (ERC) under Grant Agreement No. 648901. We also thank Professor Alejandro R. Goñi (ICMAB) for fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparing the microstructure and photovoltaic performance of 3 perylene imide acceptors with similar energy levels but different packing tendencies

  • Adel Abdelaleim, Rana
  • Gala, Elena
  • Alonso Navarro, Matías J.
  • Gutiérrez Fernández, Edgar
  • Martín, Jaime
  • Stella, Marco
  • Martínez Ferrero, Eugenia
  • Peña, Alejandro de la
  • Harbuzaru, Alexandra
  • Ramos, M. Mar
  • Ponce Ortiz, Rocío
  • Segura, José L.
  • Campoy Quiles, Mariano
While it is widely recognized that microstructure plays an important role in the performance of organic photovoltaics (OPV), systematic studies are often challenging, as varying the molecular packing through typical chemical means (such as sidechain tuning) often affects the molecular energy levels, thus preventing a clear correlation. In this work we present the synthesis of three perylene imide (PI) based electron acceptors with almost identical energy levels, but distinct packing tendencies. We confirm our initial hypothesis by measuring solution and solid-state absorption, cyclic voltammetry as well as characterizing the films by grazing incident wide angle X-ray scattering (GIWAXS). In a second step, we repeat the characterization of the three materials in blends with two polymer donors, namely PCDTBT or PBDBT, whose energy levels are well aligned with those of the PI acceptors, and which, additionally, exhibit different degrees of structural order. We show how the initial strong difference between acceptors is partially blurred in blends, but still critical. Finally, we correlate our structural data with OPV devices made with the corresponding six blends. Our data suggest that a good donor acceptor marriage should ensure good energy alignment but also exhibit complementary crystallization tendencies of the two components., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the Severo Ochoa” Program for Centers of Excellence in R&D (No. CEX2019-000917-S), and projects PGC2018-095411-B-I00, PID2019-106268GB-C33 and PID2019-110305GB-I00, as well as the European Commission through the Horizon 2020 Marie Sklodowska-Curie ITN Programme, SEPOMO, Grant Number: 722651, and the UCM (INV.GR.00.1819.10759). E.G. specially acknowledges Comunidad de Madrid and Universidad Complutense de Madrid for a post-doctoral contract (CT20/19- CT21/19/PEJD-2018-POST/IND-8661PAI). M.J.A.N. acknowledges URJC for a post-doctoral contract. R.P.O and A.H. also acknowledge support from Junta de Andalucía (projects UMA18-FEDERJA-080). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Quencher, Geometry, and Light Outcoupling on the Determination of Exciton Diffusion Length in Nonfullerene Acceptors

  • Belova, Valentina
  • Perevedentsev, Aleksandr
  • Gorenflot, Julien
  • Castro, Catherine S. P. De
  • Casademont Viñas, Miquel
  • Paleti, Sri Harish Kumar
  • Karuthedath, Safakath
  • Baran, Derya
  • Laquai, Frédéric
The correct determination of the exciton diffusion length (LD) in novel organic photovoltaics (OPV) materials is an important, albeit challenging, task required to understand these systems. Herein, a high-throughput approach to probe LD in nonfullerene acceptors (NFAs) is reported, that builds upon the conventional photoluminescence (PL) surface quenching method using NFA layers with a graded thickness variation in combination with spectroscopic PL mapping. The method is explored for two archetypal NFAs, namely, ITIC and IT-4F, using PEDOT:PSS and the donor polymer PM6 as two distinct and practically relevant quencher materials. Interestingly, conventional analysis of quenching efficiency as a function of acceptor layer thickness results in a threefold difference in LD values depending on the specific quencher. This discrepancy can be reconciled by accounting for the differences in light in- and outcoupling efficiency for different multilayer architectures. In particular, it is shown that the analysis of glass/acceptor/PM6 structures results in a major overestimation of LD, whereas glass/acceptor/PEDOT:PSS structures give no significant contribution to outcoupling, yielding LD values of 6−12 and 8−18 nm for ITIC and IT-4F, respectively. Hence, practical guidelines for quencher choice, sample geometries, and analysis approach for the accurate assessment of LD are provided., V.B., A.P., and J.G. contributed equally to this work. The authors acknowledge that this research was financially supported by the European Research Council (ERC) under grant agreement no. 648901. The authors also acknowledge financial support from the Spanish Ministry of Science and Innovation through the Severo Ochoa Program for Centers of Excellence in R&D (CEX2019-000917-S) and project PGC2018-095411-B-I00. This publication was based upon work supported by the King Abdullah University of Science and Technology (KAUST) Office of Sponsored Research (OSR) under award no: OSR-2018-CARF/CCF-3079 and award no. OSR-CRG2018-3746. The authors thank Anastasia Ragulskaya (The University of Tübingen) for contributing to the development of the computational model., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design Rules for Polymer Blends with High Thermoelectric Performance

  • Zapata Arteaga, Osnat
  • Marina, Sara
  • Zuo, Guangzheng
  • Xu, Kai
  • Dörling, Bernhard
  • Pérez, Luis Alberto
  • Reparaz, J. Sebastian
  • Martín, Jaime
  • Kemerink, Martijn
  • Campoy Quiles, Mariano
A combinatorial study of the effect of in-mixing of various guests on the thermoelectric properties of the host workhorse polymer poly[2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene] (PBTTT) is presented. Specifically, the composition and thickness for doped films of PBTTT blended with different polymers are varied. Some blends at guest weight fractions around 10–15% exhibit up to a fivefold increase in power factor compared to the reference material, leading to zT values around 0.1. Spectroscopic analysis of the charge-transfer species, structural characterization using grazing-incidence wide-angle X-ray scattering, differential scanning calorimetry, Raman, and atomic force microscopy, and Monte Carlo simulations are employed to determine that the key to improved performance is for the guest to promote long-range electrical connectivity and low disorder, together with similar highest occupied molecular orbital levels for both materials in order to ensure electronic connectivity are combined., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the Severo Ochoa" Program for Centers of Excellence in R&D (No. CEX2019-000917-S) and projects PGC2018-095411- B-I00, PGC2018-094620-A-I00, and MAT2017-90024-P (TANGENTS)-EI/Fondo Europeo de Desarrollo Regional and from the European Research Council (ERC) under Grant Agreements Nos. 648901 and 963954. J.M. thanks Ministerio de Ciencia, Innovación y Universidades for the Ramón y Cajal contract. The authors are thankful to Dr. Agustín Mihi for access and support with the FTIR equipment. The authors acknowledge the European funding (European Regional Development Fund and European Social Fund). The authors thank Andrés Gómez Rodríguez from the Scanning Probe Microscopy Laboratory (ICMAB-CSIC) for a set of fine AFM measurements. GIWAXS experiments were performed at NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff. Finally, the authors acknowledge the support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unidad de Recursos de Información Científica para la Investigación (URICI). M.K. thanks the Carl Zeiss Foundation for financial support. G.Z. acknowledges the support from Alexander von Humboldt Foundation., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Matching electron transport layers with a non-halogenated and low synthetic complexity polymer:fullerene blend for efficient outdoor and indoor organic photovoltaics

  • Rodríguez Martínez, Xabier
  • Riera Galindo, Sergi
  • Cong, Jiayan
  • Osterberg, Thomas
  • Campoy Quiles, Mariano
  • Inganäs, Olle
The desired attributes of organic photovoltaics (OPV) as a low cost and sustainable energy harvesting technology demand the use of non-halogenated solvent processing for the photoactive layer (PAL) materials, preferably of low synthetic complexity (SC) and without compromising the power conversion efficiency (PCE). Despite their record PCEs, most donor–acceptor conjugated copolymers in combination with non-fullerene acceptors are still far from upscaling due to their high cost and SC. Here we present a non-halogenated and low SC ink formulation for the PAL of organic solar cells, comprising PTQ10 and PC61BM as donor and acceptor materials, respectively, showing a record PCE of 7.5% in blade coated devices under 1 sun, and 19.9% under indoor LED conditions. We further study the compatibility of the PAL with 5 different electron transport layers (ETLs) in inverted architecture. We identify that commercial ZnO-based formulations together with a methanol-based polyethyleneimine-Zn (PEI-Zn) chelated ETL ink are the most suitable interlayers for outdoor conditions, providing fill factors as high as 74% and excellent thickness tolerance (up to 150 nm for the ETL, and >200 nm for the PAL). In indoor environments, SnO2 shows superior performance as it does not require UV photoactivation. Semi-transparent devices manufactured entirely in air via lamination show indoor PCEs exceeding 10% while retaining more than 80% of the initial performance after 400 and 350 hours of thermal and light stress, respectively. As a result, PTQ10:PC61BM combined with either PEI-Zn or SnO2 is currently positioned as a promising system for industrialisation of low cost, multipurpose OPV modules., The authors are thankful to Prof. Hans Arwin (Linköping University) for his valuable help in ellipsometry measurements and their corresponding optical modelling. The authors acknowledge Dr Luis Ever Aguirre (Epishine AB) for the acquisition of the indoor LED spectrum employed with laminated devices and Prof. Fengling Zhang (Linköping University) for lending the QE-Pro spectrometer. X. R.-M., S. R.-G., J. C. and O. I. acknowledge the Knut and Alice Wallenberg foundation for funding. The authors thank Dr Bernhard Dörling for building the electronic controller to make the speed profiles with the blade coater, and M. Gibert-Roca for designing and building the multiplexor for the sequential and rapid measurement of the 24 pixels in each sample. M. C. Q. greatly acknowledges funding by the Ministry of Science and Innovation through grants (CEX2019-000917-S) and PGC2018-095411-B-I00, and by the European Research Council through grant agreement no. 648901., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Identifying structure–absorption relationships and predicting absorption strength of non-fullerene acceptors for organic photovoltaics

  • Yan, Jun
  • Rodríguez Martínez, Xabier
  • Pearce, Drew
  • Douglas, Hana
  • Bili, Danai
  • Azzouzi, Mohammed
  • Eisner, Flurin
  • Virbule, Alise
  • Rezasoltani, Elham
  • Belova, Valentina
  • Dörling, Bernhard
  • Few, Sheridan
  • Szumska, Anna A.
  • Hou, Xueyan
  • Zhang, Guichuan
  • Yip, Hin-Lap
  • Campoy Quiles, Mariano
  • Nelson, Jenny
Non-fullerene acceptors (NFAs) are excellent light harvesters, yet the origin of their high optical extinction is not well understood. In this work, we investigate the absorption strength of NFAs by building a database of time-dependent density functional theory (TDDFT) calculations of ∼500 π-conjugated molecules. The calculations are first validated by comparison with experimental measurements in solution and solid state using common fullerene and non-fullerene acceptors. We find that the molar extinction coefficient (εd,max) shows reasonable agreement between calculation in vacuum and experiment for molecules in solution, highlighting the effectiveness of TDDFT for predicting optical properties of organic π-conjugated molecules. We then perform a statistical analysis based on molecular descriptors to identify which features are important in defining the absorption strength. This allows us to identify structural features that are correlated with high absorption strength in NFAs and could be used to guide molecular design: highly absorbing NFAs should possess a planar, linear, and fully conjugated molecular backbone with highly polarisable heteroatoms. We then exploit a random decision forest algorithm to draw predictions for εd,max using a computational framework based on extended tight-binding Hamiltonians, which shows reasonable predicting accuracy with lower computational cost than TDDFT. This work provides a general understanding of the relationship between molecular structure and absorption strength in π-conjugated organic molecules, including NFAs, while introducing predictive machine-learning models of low computational cost., J. N., J. Y., D. P., M. A., F. E., and E. R. thank the European Research Council for support under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 742708 and 648901). The authors at ICMAB acknowledge financial support from the Spanish Ministry of Science and Innovation through the Severo Ochoa” Program for Centers of Excellence in R&D (No. CEX2019-000917-S), and project PGC2018-095411-B-I00. E. R. is grateful to the Fonds de Recherche du Quebec-Nature et technologies (FRQNT) for a postdoctoral fellowship and acknowledges financial support from the European Cooperation in Science and Technology. M. A. thanks the Engineering and Physical Sciences Research Council (EPSRC) for support via doctoral studentships. F. E. thanks the Engineering and Physical Sciences Research Council (EPSRC) for support via the Post-Doctoral Prize Fellowship. X. R.-M. acknowledges Prof. Olle Inganäs and the Knut and Allice Wallenberg Foundation for funding of his current postdoctoral position. H.-L. Yip thanks the support from Guangdong Major Project of Basic and Applied Basic Research (2019B030302007). The TOC figure and Fig. 5a in the manuscript include freely available resources from Flaticon.com. J. Y. thank Xiaodan Ge for her support., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding the blade coated to roll-to-roll coated performance gap in organic photovoltaics

  • Adel Abdelaleim, Rana
  • Morse, Graham
  • Silvestri, Francesco
  • Barrena, Esther
  • Martínez Ferrero, Eugenia
  • Campoy Quiles, Mariano
  • Tiwana, Priti
  • Stella, Marco
The fabrication of efficient organic photovoltaic (OPV) modules via high throughput methods is a crucial milestone to facilitate their commercialization. The achievement of reliable printing and coating processes for large-scale modules has, however, been challenging thus far. Indeed, the performance gap is large between cells produced at lab-scale and those resulting from industrial methods. Therefore, understanding the critical steps in the upscaling process is decisive to address the research efforts towards decreasing the aforementioned gap. In this contribution, we analyze the efficiency losses associated with several of the main steps involved in the up-scaling pathway of the OPV devices, from lab-scale blade coating to pre-industrial slot die roll-to-roll coating. We show that when using materials in the active layer for which the performance is tolerant to thickness/microstructure variations, the critical steps are related to the charge carrier blocking layers, as well as potential losses due to parasitic absorption in the semitransparent electrodes., The authors acknowledge financial support from the European Commission through the Horizon 2020 Marie Sklodowska-Curie ITN Programme, SEPOMO, Grant Number: 722651 and from the Spanish Ministry of Science and Innovation through the Severo Ochoa” Program for Centers of Excellence in R&D (No. CEX2019-000917-S), and project PGC2018-095411-B-I00., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

RAINBOW Organic Solar Cells: Implementing Spectral Splitting in Lateral Multi-Junction Architectures

  • Gibert Roca, Martí
  • Casademont Viñas, Miquel
  • Liu, Quan
  • Vandewal, Koen
  • Goñi, Alejandro R.
  • Campoy Quiles, Mariano
While multi-junction geometries have the potential to boost the efficiency of organic solar cells, the experimental gains yet obtained are still very modest. This work proposes an alternative spectral splitting device concept in which various individual semiconducting junctions with cascading band gaps are laid side by side, thus the name RAINBOW. Each lateral sub-cell receives a fraction of the spectrum that closely matches the main absorption band of the given semiconductor. Here, simulations are used to identify the important material and device properties of each RAINBOW sub-cell. Using the resulting design rules, three systems are selected, namely PBDB-T-2F:IO-4Cl, PBDB-T-2F:Y6 and PTB7-Th:COTIC-4F, and their potential as sub-cells in this geometry is experimentally investigated. With the aid of a custom built setup that generates spectrally spread sunlight on demand, the simulations are experimentally validated, showing that this geometry can lead to a reduction in thermalization losses and an improvement in light harvesting, which results in a relative improvement in efficiency of 46.6% with respect to the best sub-cell. Finally, a working proof of concept monolithic device consisting of two sub-cells deposited from solution on the same substrate is fabricated, thus demonstrating the feasibility and the potential of the RAINBOW solar cell concept. This article is protected by copyright. All rights reserved., The Spanish "Ministerio de Ciencia e Innovación (MICINN)" is gratefully acknowledged for its supportthrough grant No. CEX2019-000917-S (FUNFUTURE) in the framework of the Spanish Severo OchoaCentre of Excellence program and the AEI/FEDER(UE) grants PGC2018-095411-B-I00(RAINBOW),TED2021-131911B-I00and PID2021-128924OB-I00(ISOSCELLES). The authors also thank the Cata-lan agency AGAUR for grant2021-SGR-00444. MCV acknowledges a FPI fellowship (PRE2019-089855)from MICINN co-financed by the European Social Fund and MGR acknowledges the scholarship FPU16/02631 from the Spanish "Ministerio de Educación". MCV and MGR also thank the PhD programme in Materi-als Science from Universitat Autònoma de Barcelona in which both were enrolled. KV and QL acknowl-edge funding by the European Research Council (ERC, grant agreement864625)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Using pressure to unravel the structure-dynamic-disorder relationship in metal halide perovskites

  • Xu, Kai
  • Pérez Fidalgo, Luis
  • Charles, Bethan L.
  • Weller, Mark T.
  • Alonso Carmona, M. Isabel
  • Goñi, Alejandro R.
The exceptional optoelectronic properties of metal halide perovskites (MHPs) are presumed to arise, at least in part, from the peculiar interplay between the inorganic metal-halide sublattice and the atomic or molecular cations enclosed in the cage voids. The latter can exhibit a roto-translative dynamics, which is shown here to be at the origin of the structural behavior of MHPs as a function of temperature, pressure and composition. The application of high hydrostatic pressure allows for unraveling the nature of the interaction between both sublattices, characterized by the simultaneous action of hydrogen bonding and steric hindrance. In particular, we find that under the conditions of unleashed cation dynamics, the key factor that determines the structural stability of MHPs is the repulsive steric interaction rather than hydrogen bonding. Taking as example the results from pressure and temperature-dependent photoluminescence and Raman experiments on MAPbBr[Formula: see text] but also considering the pertinent MHP literature, we provide a general picture about the relationship between the crystal structure and the presence or absence of cationic dynamic disorder. The reason for the structural sequences observed in MHPs with increasing temperature, pressure, A-site cation size or decreasing halide ionic radius is found principally in the strengthening of the dynamic steric interaction with the increase of the dynamic disorder. In this way, we have deepened our fundamental understanding of MHPs; knowledge that could be coined to improve performance in future optoelectronic devices based on this promising class of semiconductors., The Spanish “Ministerio de Ciencia e Innovación (MICINN)” is gratefully acknowledged for its support through Grant CEX2019-000917-S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Centre of Excellence program and the AEI/FEDER(UE) Grants PGC2018-095411-B-100 (RAINBOW) and PID2021-128924OB-I00 (ISOSCELLES). The authors also thank the Catalan agency AGAUR for Grant 2021-SGR-00444 and the National Network “Red Perovskitas” (MICINN funded). K.X. acknowledges a fellowship (CSC201806950006) from China Scholarship Council and the PhD programme in Materials Science from Universitat Autònoma de Barcelona in which he was enrolled. B.C. thanks the EPSRC for PhD studentship funding via the University of Bath, CSCT CDT (EP/G03768X/1)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anomalous Electron–Phonon Coupling in Cesium-Substituted Methylammonium Lead Iodide Perovskites

  • Pérez Fidalgo, Luis
  • Xu, Kai
  • Charles, Bethan L.
  • Weller, Mark T.
  • Alonso Carmona, M. Isabel
  • Goñi, Alejandro R.
Most metal halide perovskites (MHPs) which under ambient conditions crystallize in a tetragonal or cubic phase exhibit a fairly linear increase of the fundamental gap with increasing temperature, in frank contrast to other conventional semiconductors. Though valid in general for MHPs, it has been shown for the archetypal perovskite MAPbI3 (MA stands for methylammonium) that such a behavior is due to an almost equal footing of the effects of thermal expansion on the electronic states and the temperature-induced gap renormalization due to the electron–phonon interaction. Here, the influence of the incorporation of small amounts of Cs on the gap renormalization was investigated in two CsxMA1–xPbI3 single crystals (x = 0.05 and 0.1). Strikingly, from ambient to a temperature Ton of 250–280 K, the slope of the linear temperature dependence of the energy gap for both Cs-containing samples is almost half that for pure MAPbI3. Below Ton and within the stability range of the tetragonal phase, the slope recovers the value of MAPbI3. Based on density functional theory calculations, this surprising behavior is explained as being due to the appearance of an additional electron–phonon coupling mechanism ascribed to dynamic tilting of the PbI6 octahedrons. The latter is activated by the translational dynamics of the Cs cations between equivalent potential minima inside the inorganic cage voids, which is unfolded above the onset temperature Ton. These results provide further evidence of the key role that the A-site cation dynamics plays in the optoelectronic properties of this fascinating class of materials., The Spanish ”Ministerio de Ciencia e Innovación (MICINN)” is gratefully acknowledged for its support through grant CEX2019-000917 S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Centre of Excellence program and the AEI/FEDER(UE) grants PGC2018-095411-B-100 (RAINBOW) and PID2021-128924OB-I00 (ISOSCELLES). The authors also thank the Catalan agency AGAUR for grant 2021-SGR-00444 and the National Network ”Red Perovskitas” (MICINN funded). K.X. acknowledges a fellowship (CSC201806950006) from China Scholarship Council and the PhD programme in Materials Science from Universitat Autònoma de Barcelona in which he was enrolled. B.C. thanks the EPSRC for PhD studentship funding via the University of Bath, CSCT CDT (EP/G03768X/1). We would also like to thank ISIS for the award of beamtime under Proposal RB1610285(ISIS)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Using spatial confinement to decipher polymorphism in the organic semiconductor p-DTS(FBTTh2)2

  • Marina, Sara
  • Dyson, Matthew
  • Rodríguez Martínez, Xabier
  • Reid, Obadiah G.
  • Li, Ruipeng
  • Rumbles, Garry
  • Smilgies, Detlef
  • Amassian, Aram
  • Campoy Quiles, Mariano
  • Stingelin, Natalie
  • Martín, Jaime
Many molecular semiconductors show a pronounced polymorphism; i.e. they can adopt different crystal arrangements depending, e.g., on temperature, pressure, and selected solidification pathways. This renders reliable fabrication of molecular semiconductor devices challenging, as minute changes in processing can lead to numerous structures and, hence, optoelectronic responses. Here, we demonstrate using the example of p-DTS(FBTTh2)2 that spatial confinement at the nanoscale can be exploited to detect specific polymorphs and the conditions under they form. A new polymorph exhibiting a higher charge-carrier mobility compared to previously reported p-DTS(FBTTh2)2 crystal forms is found at elevated temperatures and high degree of confinement, illustrating the benefit of our approach and promising that spatial confinement will find wide-spread application to understand and control polymorph formation in organic semiconductors., This work is supported by MCINN/FEDER (under ref. PID2021-126243NB-I00 and PGC2018-095411-B-I00) and Xunta de Galicia (Proyectos de Consolidación ref. ED431F 2021/009). J. M. thanks MCINN for the Ramón y Cajal contract. N. S. in addition gratefully acknowledges support from the IdEx Bordeaux Excellence program (ANR-10-IDEX-03-02). The authors would like to acknowledge the financial support provided by the IONBIKE RISE project. This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 823989. All authors acknowledge the synchrotron radiation source ELETTRA (Trieste, Italy) for providing beam time and the staff from the SAXS beamline for support. This work was authored in part by the National Renewable Energy Laboratory, operated by Alliance for Sustainable Energy, LLC, for the U. S. Department of Energy (DOE) under Contract No. DE-AC36-08GO28308. Funding for TRMC measurements was provided by the Solar Photochemistry Program, Division of Chemical Sciences, Geosciences, and Biosciences, Office of Basic Energy Sciences, U. S. Department of Energy. The views expressed in the article do not necessarily represent the views of the DOE or the U. S. Government. The U. S. Government retains and the publisher, by accepting the article for publication, acknowledges that the U. S. Government retains a nonexclusive, paid-up, irrevocable, worldwide license to publish or reproduce the published form of this work, or allow others to do so, for U. S. Government purposes. J. M. thanks MICINN/FEDER for the Grant PID2021-126243NB-I00., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combinatorial screening of wide band-gap organic solar cell materials with open-circuit voltage between 1.1 and 1.4 V

  • Casademont Viñas, Miquel
  • Capolat, Daniel
  • Quesada Ramírez, Arianna
  • Reinfelds, Matiss
  • Trimmel, Gregor
  • Sanviti, Matteo
  • Martín, Jaime
  • Goñi, Alejandro R.
  • Kirchartz, Thomas
  • Campoy Quiles, Mariano
Wide band-gap organic solar cells are gaining interest due to their applications in emergent light-harvesting technologies such as underwater photovoltaics, multi-junction solar cells, or indoor photovoltaics. In this work, a combinatorial screening approach is used to explore binary combinations of three wide band-gap donors (PTQ10, PM6, and D18) and three wide band-gap acceptors (PMI-FF-PMI, O-IDFBR, and IO-4Cl) deposited from solution in two solvents (CB and CF). In total, 18 combinations are blade-coated with active layers exhibiting a thickness gradient generating solar cells with 12 different thicknesses. PTQ10:IO-4Cl and PTQ10:O-IDFBR are the most efficient blends with efficiencies of 7.31% and 6.87%, respectively. The voltage loss analysis shows that PTQ10-based devices exhibit the lowest non-radiative voltage losses, whereby the PTQ10:O-IDFBR combination has the lowest voltage loss of all studied blends, with a remarkably high open-circuit voltage (Voc) of 1.35 V. Due to their high performance and Voc, PTQ10:O-IDFBR devices were also studied for indoor light harvesting, achieving an efficiency of 22.6% and a Voc of 1.21 V under 560 lux indoor illumination. To the best of our knowledge, this indoor Voc value is the highest achieved in the field of indoor organic photovoltaics., The Spanish “Ministerio de Ciencia e Innovaci´ on (MICINN)” is gratefully acknowledged for its support through grant No. CEX2019-000917-S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Centre of Excellence program and the AEI/FEDER(UE) grants PGC2018-095411-B-I00 (RAINBOW), TED2021-131911B-I00, and PID2021-128924OB-I00 (ISOSCELLES). The authors also thank the Catalan agency AGAUR for grant 2021-SGR-00444. M. C. V. acknowledges an FPI fellowship (PRE2019-089855) from MICINN co-nanced by the European Social Fund. M. C. V. and A. Q. also thank the PhD program in Materials Science from Universitat Aut` onoma de Barcelona in which both were enrolled. M. C. V. acknowledges Dr Benjamin Klingebiel and Mr Markus Hülsbeck for their help during EL and PL measurements, Mr Wilfried Reetz for his help during EQEPVmeasurements. Dr Markus Scharber is acknowledged for his insights in PMI-FF-PMI-based solar cells. Dr Alfonsina A. A. Torimtubun is acknowledged for her helpful discussions on device fabrication. M. R. and G. T. thank Birgit Ehmann, Colien Purkathofer, and Stefan Weber for synthesis of PMI-FF-PMI., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed