Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 116
Encontrada(s) 2 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Matrix composition and patch edges influence plant-herbivore interactions in marine landscapes

  • Pagès, Jordi F.
  • Gera, Alessandro
  • Romero, Javier
  • Alcoverro, Teresa
38 páginas, 4 figuras, 3 tablas., 1. The functioning of ecosystems can be strongly driven by landscape attributes. Despite its importance, however, our understanding of how landscape influences ecosystem function derives mostly from species richness and abundance patterns, with few studies assessing how these relate to actual functional rates. 2. We examined the influence of landscape attributes on the rates of herbivory in seagrass meadows, where herbivory has been identified as a key process structuring these relatively simple systems. The study was conducted in three representative Posidonia oceanica meadows. The principal herbivores in these meadows are the fish Sarpa salpa and the sea urchin Paracentrotus lividus, and we hypothesised that differences in their interaction with landscape attributes would significantly influence herbivory rates. 3. We measured herbivore abundance, herbivory rates, primary production and plant quality (C:N) in seagrass patches embedded either in rock or in sand (matrix attribute), in patches either near or far from a rocky reef (distance attribute) and at the edges and interior of meadows. 4. Our results show that matrix and meadow edges significantly affected the actual levels of herbivory. Herbivory rates were higher in seagrass patches embedded in a rocky matrix compared to those on sand, and herbivory at the centre of seagrass meadows was higher than at the edges. In contrast, patch distance to rocky reefs did not affect herbivory. Neither herbivore abundance nor food quality explained the patterns across different landscape attributes. This suggests that variation in herbivory across the landscape may be related much more to behavioural differences between species in their evaluation of risk, movement, and food preference in relation to the landscape structure. 5. Our results indicate that richness and abundance patterns may mask critical interactions between landscape attributes and species responses, which result in considerable heterogeneity in the way key functional processes like herbivory are distributed across the ecosystem mosaic., The Spanish Ministry of Science and Innovation funded this research (projects CTM2010-22273-C02-01 and 02). The Spanish Ministry of Education supported JP (scholarship AP2008-01601) and the Spanish National Research Council supported AG (scholarship JAEPre_08_00466)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The effect of environmental conditions on the mechanical and thermoelectric properties of Bi2Ca2Co1.7Ox textured rods

  • Kahraman, F.
  • Diez, J. C.
  • Rasekh, Sh.
  • Madre, M. A.
  • Torres, M. A.
  • Sotelo, Andres
The effect of environmental conditions on the microstructural, mechanical and thermoelectric properties of highly textured Bi2Ca2Co1.7Ox thermoelectric materials was investigated by powder X-ray diffraction, scanning electron microscopy, three point bending test, electrical resistivity, and thermopower measurements. Textured thin rods were directionally grown from the melt through a laser floating zone melting technique. The mechanical and thermoelectric properties of Bi2Ca2Co1.7Ox were determined as a function of two different environmental conditions, air and water. Flexural strength data showed that these oxide materials possess an unsuspected degradation resistance. These good results have been related to the presence of a very thin (~250 µm) low porosity region and relatively small grain sizes, which avoids the internal degradation by water infiltration through the porosity. Moreover, thermoelectric performances, evaluated through the power factor are maintained practically unchanged, independently of the environmental conditions., The authors acknowledge financial support from the Gobierno de Aragón and the Fondo Social Europeo (Consolidated Research Groups T12 and T87) and MINECO-FEDER (Project MAT2013-46505-C3-1-R). F. Kahraman acknowledges a financial grant from the Council of Higher Education (YÖK) in Turkey for international mobility. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Use of laser technology to produce high thermoelectric performances in Bi2Sr2Co1.8Ox

  • Rasekh, Sh.
  • Costa, F. M.
  • Ferreira, Nuno M.
  • Torres, M. A.
  • Madre, M. A.
  • Diez, J. C.
  • Sotelo, Andres
Bi2Sr2Co1.8Ox bulk polycrystalline ceramics were prepared by conventional sintering of powders, obtained by polymer solution method and by directional growth using the laser floating zone technique. Microstructural analysis showed randomly oriented grains in the classical sintered materials, while in the laser-textured samples well oriented crystals with the c-axis nearly perpendicular to the growth direction were observed. A significant reduction on electrical resistivity, compared with the sintered materials, was observed due to the decrease on the secondary phases content. As a consequence, a raise on the power factor of about 2 and 5 times, compared with the classically sintered samples, was obtained for the as-grown and annealed laser-textured samples, respectively. The maximum power factor obtained at 650 °C in the annealed laser-textured samples (∼0.20 mW/K2 m) is much higher than the best value obtained in sinter–forged textured materials at the same temperature., The authors wish to thank the MINECO-FEDER (Project MAT2013--46505-C3-1-R) and the Gobierno de Aragón and Fondo Social Europeo (Research Groups T12 and T87) for financial support. F.M. Costa and N.M. Ferreira gratefully acknowledge the support from UID/CTM/50025/2013 project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanical and thermoelectric environmental evolution properties of Bi2 Sr2 Co1.8 Ox ceramics textured by laser floating zone technique

  • Kahraman, F.
  • Sotelo, Andres
  • Madre, M. A.
  • Rasekh, Sh.
  • Torres, M. A.
  • Diez, J. C.
Bi2Sr2Co1.8Ox ceramics have been synthesized through solid-state reaction methods and directionally grown from the melt by laser floating zone technique. Mechanical and thermoelectric characteristics of this material were determined by three point bending tests and the four probe technique, respectively. The mechanical and thermoelectric properties of Bi2Sr2Co1.8Ox were determined as a function of the environmental conditions, air and water. Flexural strength data show that textured materials possess a high degradation resistance due to the low porosity of the external part of the rods (~65 µm), which avoids water infiltration and, as a consequence, the internal degradation. Moreover, power factor values are maintained practically unchanged for the samples immersed in water for 24 h., The authors acknowledge financial support from the Gobierno de Aragón and the Fondo Social Europeo (Consolidated Research Groups T12 and T87) and MINECO-FEDER (Project MAT2013-46505-C3-1-R). F. Kahraman acknowledges a financial grant from the Council of Higher Education (YÖK) in Turkey for international mobility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of synthesis methods on the Ca3Co4O9 thermoelectric ceramic performances

  • Sotelo, Andres
  • Rasekh, Sh.
  • Torres, M. A.
  • Bosque, P.
  • Madre, M. A.
  • Diez, J. C.
Three different synthesis methods producing nanometric grain sizes, coprecipitation with ammonium carbonate, oxalic acid, and by attrition milling have been studied to produce Ca3Co4O9 ceramics and compared with the classical solid state route. These three processes have produced high reactive precursors and all the organic material and CaCO3·have been decomposed in a single thermal treatment. Coprecipitation leads to pure Ca3Co4O9 phase, while attrition milling and classical solid state produce small amounts of Ca3Co2O6 secondary phase. Power factor values are similar for all three samples, being slightly lower for the ones produced by attrition milling. These values are much higher than the obtained in samples prepared by the classical solid state method, used as reference. The maximum power factor values determined at 800 °C (~0.43 mW/K2 m) are slightly higher than the best reported values obtained in textured ones which also show much higher density values., The authors wish to thank the Gobierno de Aragón (Grupos de Investigacion Consolidados T12 and T87) and MINECO-FEDER (MAT2013-46505-C3-1-R) for financial support. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. Sh. Rasekh acknowledges a JAEPreDoc2010 grant from the CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of synthetic clay and biochar addition on dissipation and enantioselectivity of tebuconazole and metalaxyl in an agricultural soil: Laboratory and field experiments

  • Gámiz, B.
  • López-Cabeza, R.
  • Facenda, G.
  • Velarde Muñoz, Pilar
  • Hermosín, M.C.
  • Cox, Lucía
  • Celis, Rafael
10 páginas.-- 4 figuras.-- 3 tablas.-- referencias.-- Supplementary data associated with this article can be found, in the online version, at http://dx.doi.org/10.1016/j.agee.2016.05.017, Laboratory and field experiments were conducted to assess how the addition of oleate-modified hydrotalcite (clay) and biochar (BC) to an agricultural soil affected the sorption, leaching, persistence, and enantiomeric composition of soil residues of two chiral fungicides, tebuconazole and metalaxyl. Laboratory experiments showed that the sorption of both fungicides ranked as follows: unamended soil < BC-amended soil < clay-amended soil. The addition of clay at a rate of 1% increased metalaxyl soil sorption coefficient (Kd) from 0.34 to 3.14 L kg−1 and that of tebuconazole from 2.4 to 47.4 L kg−1. In our experimental set-up, field plots were either unamended or amended with clay (2 t ha−1) or BC (4 t ha−1), and subsequently treated with a mixture of tebuconazole and metalaxyl at 3 and 6 kg ha−1, respectively. The leaching, persistence, and enantiomer composition of fungicides residues were monitored by sampling at different soil depths (0–5, 5–10, 10–20 cm) for 98 days. No significant changes in the scarce mobility and long persistence of tebuconazole upon amending the soil with clay or BC were observed. In contrast, sorption to clay and BC particles reduced the leaching and degradation of metalaxyl and the clay increased its persistence in the topsoil compared to the unamended soil. The enantioselective analysis of tebuconazole and metalaxyl soil residues indicated that tebuconazole remained mostly racemic along the experiment, whereas for metalaxyl the concentration of S-enantiomer was greater than the concentration of R-enantiomer, more so at longer experimental times and deeper horizons. Nevertheless, for the top 0–5 cm soil layer metalaxyl remained more racemic in clay- and BC-amended soil than in unamended soil. Our results show that addition of amendments with high sorptive capacities can be beneficial in reducing leaching and degradation losses of chiral pesticide enantiomers from the topsoil, and that sorption by the amendments can influence the final enantiomeric composition of pesticide residues., This work was financed by the Spanish Ministry of Economy and Competitiveness (MINECO Projects AGL2011-23779, AGL2013-48446-C3-1-R and AGL2014-51897-R) and Junta de Andalucía (JA Research Group AGR-264), with FEDER-FSE funds. R. López-Cabeza thanks MINECO for a pre-doctoral fellowship linked to the Project AGL2011-23779 (Grant BES-2012-059945). The authors also thank P. Franco (Chiral Technologies Europe) and I. Girón (IRNAS) for their technical assistance, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Alhambra survey: evolution of galaxy spectral segregation

  • Hurtado-Gil, L.
  • Arnalte-Mur, P.
  • Martínez, Vicente J.
  • Fernández-Soto, Alberto
  • Stefanon, Mauro
  • Ascaso, Begoña
  • López-Sanjuan, Carlos
  • Márquez, Isabel
  • Pović, Mirjana
  • Viironen, Kerttu
  • Aguerri, J.A.L.
  • Alfaro, Emilio J.
  • Aparicio Villegas, Teresa
  • Benítez, Narciso
  • Broadhurst, Tom
  • Cabrera-Caño, Jesús
  • Castander, Francisco J.
  • Cepa, Jordi
  • Cerviño, Miguel
  • Cristóbal-Hornillos, David
  • González Delgado, Rosa M.
  • Husillos, César
  • Infante, Leopoldo
  • Masegosa, Josefa
  • Moles, Mariano
  • Molino, Alberto
  • Olmo, Ascensión del
  • Paredes, Silvestre
  • Prada, Francisco
  • Quintana, José María
arXiv:1601.03668v1, We study the clustering of galaxies as a function of spectral type and redshift in the range 0.35 <z <1.1 using data from the Advanced Large Homogeneous Area Medium Band Redshift Astronomical (ALHAMBRA) survey. The data cover 2.381 deg in 7 fields, after applying a detailed angular selection mask, with accurate photometric redshifts down to I <24. From this catalog we draw five fixed number density redshift-limited bins. We estimate the clustering evolution for two different spectral populations selected using the ALHAMBRA-based photometric templates: quiescent and star-forming galaxies. For each sample we measure the real-space clustering using the projected correlation function. Our calculations are performed over the range [0.03, 10.0] h Mpc, allowing us to find a steeper trend for Mpc, which is especially clear for star-forming galaxies. Our analysis also shows a clear early differentiation in the clustering properties of both populations: star-forming galaxies show weaker clustering with evolution in the correlation length over the analyzed redshift range, while quiescent galaxies show stronger clustering already at high redshifts and no appreciable evolution. We also perform the bias calculation where similar segregation is found, but now it is among the quiescent galaxies where a growing evolution with redshift is clearer (abrigatted). These findings clearly corroborate the well-known color-density relation, confirming that quiescent galaxies are mainly located in dark matter halos that are more massive than those typically populated by star-forming galaxies., This work was mainly supported by the Spanish Ministry for Economy and Competitiveness and FEDER funds through grants AYA2010-22111-C03-02 and AYA2013-48623-C2-2, and by the Generalitat Valenciana through project PrometeoII 2014/060. We also acknowledge support from the Spanish Ministry for Economy and Competitiveness and FEDER funds through grants AYA2012-39620, AYA2013-40611-P, AYA2013-42227-P, AYA2013-43188-P, AYA2013-48623-C2-1, ESP2013-48274, AYA2014-58861-C3-1, Junta de Andalucia grants TIC114, JA2828, P10-FQM-6444, and Generalitat de Catalunya project SGR-1398. Begona Ascaso acknowledge funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 656354., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Sustainability through use of cover crops in Mediterranean tree crops such as olives and vines: current knowledge and challenges

  • Gómez Calero, José Alfonso
Trabajo presentado en la International conference on conservation agriculture and land uses (CALUS 2016), celebrada en Budapest del 31 de mayo al 2 de junio de 2016., Tree crops cover a large area of European landscape, 13.3 Mha, with olive, grapes, nuts and almonds been the most extended and mostly concentrated in Mediterranean areas. The cultivation of tree crops in rain limited Mediterranean areas depend on an adequate management of water balance that, been historically mostly based on bare soil, has create severe erosion and offsite contamination problems in sloping areas. The use of temporary cover crops can be an alternative to control these problems with a larger effect on erosion control than on reducing runoff, and a moderate impact on soil properties. This impact depend strongly on the ability to implement in commercial farms temporary cover crops that achieve a significant development during the rainy season while simultaneously minimizing the competition for soil water with the major crop. This has balance between soil protection and yield has been achieved in some conditions but not in others, and a significant reduction in yield has been reported for the some situations. This potential risk of yield decrease, combine with the difficulty to see a collapse in yield due to soil degradation by water erosion in the short/medium term can explain, partially, the reluctance of farmers for an extensive use of temporary cover crops. The development of improved strategies for using temporary cover crops which could include the use of water balance models, new varieties better adapted to the region, and strategies for restoring ground cover in severely degraded orchards seems to be necessary, coupled with regulations and incentive to their use by farmers. Future research should focus in the less understood elements of this system, among them root development, biomass production, phenology under different microclimate of the cover crops and the main tree crops, use of cover crops mixes, which are hampering the fine tuning of the system for specific conditions. It is also necessary a better definition and measurement of the impacts of cover crops on biodiversity that should be related to the landscape conditions., I would highlight specially the contribution of projects AGL2015-65036-C3-1 and Vinedivers (Spanish Ministry of Economy and Competitiveness), P12-AGR-931 (Andalusian Government) and FEDER funds which are currently funding research on this subject in the laboratory of Soil Erosion at IAS-CSIC., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing and controlling single-atom high-harmonic generation spectra: a time-dependent density-functional scheme

  • Castro, Alberto
  • Rubio, Angel
  • Gross, E. K. U.
High harmonic generation (HHG) provides a flexible framework for the development of coherent light sources in the extreme-ultraviolet and soft X-ray regimes. However it suffers from low conversion efficiencies as the control of the HHG spectral and temporal characteristics requires manipulating electron trajectories on attosecond time scale. The phase matching mechanism has been employed to selectively enhance specific quantum paths leading to HHG. A few important fundamental questions remain open, among those how much of the enhancement can be achieved by the single-emitter and what is the role of correlations (or the electronic structure) in the selectivity and control of HHG generation. Here we address those questions by examining computationally the possibility of optimizing the HHG spectrum of isolated hydrogen and helium atoms by shaping the slowly varying envelope of a 800 nm, 200-cycles long laser pulse. The spectra are computed with a fully quantum mechanical description, by explicitly computing the time-dependent dipole moment of the systems using a time-dependent density-functional approach (or the single-electron Schrödinger equation for the case of H), on top of a one-dimensional model. The sought optimization corresponds to the selective enhancement of single harmonics, which we find to be significant. This selectivity is entirely due to the single atom response, and not to any propagation or phase-matching effect. Moreover, we see that the electronic correlation plays a role in the determining the degree of optimization that can be obtained., This work was supported by the European Commission within the FP7 CRONOS project (Grant number 280879). A.R. acknowledges financial support from the European Research Council Advanced Grant DYNamo (ERC-2010- AdG-267374), Spanish Grant (FIS2013-46159-C3-1-P), Grupos Consolidados UPV/EHU del Gobierno Vasco (IT578-13), and COST Actions CM1204 (XLIC) and MP1306 (EUSpec). A.C. acknowledges support from the Spanish Grant FIS2013-46159-C2-2-P., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the relationship between sloppiness and identifiability

  • Chis, O.
  • Villaverde, A. F.
  • Banga, Julio R.
  • Balsa-Canto, Eva
25 páginas, 11 figuras, 2 tablas, Dynamic models of biochemical networks are often formulated as sets of non-linear ordinary differential equations, whose states are the concentrations or abundances of the network components. They typically have a large number of kinetic parameters, which must be determined by calibrating the model with experimental data. In recent years it has been suggested that dynamic systems biology models are universally sloppy, meaning that the values of some parameters can be perturbed by several orders of magnitude without causing significant changes in the model output. This observation has prompted calls for focusing on model predictions rather than on parameters. In this work we examine the concept of sloppiness, investigating its links with the long-established notions of structural and practical identifiability. By analysing a set of case studies we show that sloppiness is not equivalent to lack of identifiability, and that sloppy models can be identifiable. Thus, using sloppiness to draw conclusions about the possibility of estimating parameter values can be misleading. Instead, structural and practical identifiability analyses are better tools for assessing the confidence in parameter estimates. Furthermore, we show that, when designing new experiments to decrease parametric uncertainty, designs that optimize practical identifiability criteria are more informative than those that minimize sloppiness, This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 686282 (“CANPATHPRO”) and from the Spanish government (MINECO) and the European Regional Development Fund (ERDF) through the projects “SYNBIOFACTORY” (grant number DPI2014-55276-C5-2-R), and “IMPROWINE” (grant number AGL2015-67504-C3-2-R), No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Decrease of Ca3Co4O9+δ thermal conductivity by Yb-doping

  • Klirat, G.
  • Aksan, M. A.
  • Rasekh, Sh.
  • Madre, M. A.
  • Diez, J. C.
  • Sotelo, Andres
In this study, the effect of Yb-substitution on the structural, electrical and thermal transport properties of the CaCoO system has been investigated in the low temperature region (between 10 and 300 K). The resistivity of samples increases with raising the Yb-concentration in the system. All the samples show a metal-semiconductor transition below 85 K. In the analysis based on Strongly Correlated Fermi Liquid Model, an increased bandwidth and a reduced electronic correlation are found. It has also been found that the energy gap, E , value also decreases with Yb-substitution. The samples show positive thermoelectric power, indicating that dominant charge carriers are holes in all the samples. The thermoelectric power value decreases with Yb-substitution. From Mott equation, it is determined that the Fermi energy and hole concentration decrease in the Yb-susbtituted samples, compared to the undoped ones. Thermal conductivity, κ, is decreased in about 50% of the measured in undoped samples for the 0.01 and 0.03 Yb-doped samples at 300 K. Highest figure of merit, ZT, value is found to be 5.4 10 at 300 K for the unsubstituted sample and the ZT value decreases by the substitution., The authors wish to thank the MINECO-FEDER (Project MAT2013-46505-C3-1-R) and the Gobierno de Aragón and Fondo Social Europeo (Research Groups T12 and T87) for financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of secondary annealing process on critical current density in highly textured Bi-2212 superconducting system

  • Aksan, M. A.
  • Madre, M. A.
  • Rasekh, Sh.
  • Constantinescu, G.
  • Torres, M. A.
  • Diez, J. C.
  • Sotelo, Andres
  • Yakinci, M. E.
Bi-2212 samples prepared by a solid-state reaction technique have been grown from the melt using the laser floating zone method. After annealing the as-grown bars, the samples showed a good grain alignment and a high transport critical current density. Secondary annealing processes were performed on the annealed samples with the aim of producing Bi-2212 phase controlled decomposition. Hence, the Bi-2201 phase and the secondary phases, which act as effective pinning centers, were obtained with the secondary annealing process. After these thermal treatments, the transport critical current densities of samples significantly increased, when compared to the annealed ones. The maximum critical current density was achieved when the samples were subjected to secondary annealing at 680°C for 168 h with an improvement of ~80%, compared to the annealed ones. Moreover, it was found that magnetization of the secondarily annealed samples was also increased. The magnetic critical current densities in these secondary annealed samples were about 3 times higher than the values obtained for the annealed ones. These results clearly indicate that the secondary annealing processes lead to the formation of effective pinning centers in the bulk material., The authors acknowledge financial support from the Gobierno de Aragón (Grupos de Investigacion Consolidados T12 and T87) and the Spanish MINECO-FEDER (Project MAT2013-46505-C3-1-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Na doping on the Ca3Co4O9 thermoelectric performance

  • Constantinescu, G.
  • Rasekh, Sh.
  • Torres, M. A.
  • Bosque, P.
  • Diez, J. C.
  • Madre, M. A.
  • Sotelo, Andres
Ca3-xNaxCo4O9 polycrystalline thermoelectric ceramics with small amounts of Na (x=0, 0.01, 0.03, 0.05, 0.07, and 0.10) have been prepared using the classical solid state method. Microstructural characterization has shown that Na has been incorporated into the Ca3Co4O9 phase and that no Na-based secondary phases have been produced. It has also been found that Na addition promotes grain growth and favours sintering due to the formation of a small amount of liquid phase. Electrical resistivity decreases when Na content increases until 0.07Na addition while Seebeck coefficient is maintained practically unchanged. The improvement in electrical resistivity leads to higher power factor values than the usually obtained in samples prepared by more complex and expensive techniques., This research has been supported by the Spanish MINECO-FEDER (MAT2013-46505-C3-1-R). The authors wish to thank the Gobierno de Aragón-Fondo Social Europeo (Consolidate research group T12 and consolidated research group T87) for financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Yb substitution in Bi-2212 ceramics prepared by laser floating zone technique

  • Özkurt, B.
  • Özçelik, Bekir
  • Madre, M. A.
  • Sotelo, Andres
  • Diez, J. C.
In the present work, the influence of Yb substitution for Bi on the structural, electrical and magnetic properties of textured Bi-2212 ceramics has been investigated. X-ray diffraction studies indicated that the major peaks correspond to the Bi-2212 phase. The SEM images clearly show that there is an increase in the number of secondary phases with raising Yb content while all samples maintain similar grain morphology. Magnetic analysis of all samples has been done by magnetic hysteresis measurements, indicating that an enhancement in the M-H loops is obtained by a low Yb doping. The critical current density of samples was calculated from the M-H curves by using Bean’s critical state model, indicating that sample with 0.05 Yb substitution possesses the highest Jc values., The authors wish to thank the Gobierno de Aragón and Fondo Social Europeo (Grupos de Investigacion Consolidados T12 and T87) and MINECO-FEDER (MAT2013-46505-C3-1-R) for financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancement of mechanical and thermoelectric properties of Ca3Co4O9 by Ag addition

  • Kahraman, F.
  • Madre, M. A.
  • Rasekh, Sh.
  • Salvador, C.
  • Bosque, P.
  • Torres, M. A.
  • Diez, J. C.
  • Sotelo, Andres
Ca3Co4O9 + x wt.% Ag (x = 0, 1, 3, 5, and 10) polycrystalline thermoelectric ceramics have been prepared by a sol–gel route via nitrates followed by high temperature treatment before sintering. Out-of-plane XRD data have shown that major phase is the Ca3Co4O9 one, accompanied by metallic Ag. SEM observations have agreed with the XRD data. Apparent density measurements have revealed that all samples possess densities ranging between 80% and 90% when Ag content is raised. Mechanical properties have shown a drastic increase of bending stress when Ag is added to the samples. Electrical resistivity decreases with the Ag content, compared with the pure ones, while Seebeck coefficient slightly decreases. Maximum power factor values around 0.43 mW/K2 m at 800 °C have been achieved for the 10 wt.% Ag samples which is much higher than the measured in the pure Ca3Co4O9 samples., This research has been supported by MINECO-FEDER (MAT2013-46505-C3-1-R). The authors wish to thank the Gobierno de Aragón-Fondo Social Europeo (Consolidated Research Groups T12 and T87) for financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermoelectric properties in Ca3Co4-xMnxOy ceramics

  • Constantinescu, G.
  • Torres, M. A.
  • Rasekh, Sh.
  • Bosque, P.
  • Madre, M. A.
  • Diez, J. C.
Ca3Co4-xMnxOy polycrystalline thermoelectric ceramics with small amounts of Mn have been prepared by the classical solid state method. X-ray diffraction data have shown that Ca3Co4O9 is the major phase, with small amounts of the Ca3Co2O6 one. Moreover, they show that the Mn has been incorporated into these two phases. Electrical resistivity decreases, compared with the values for undoped samples, with Mn content until a minimum for the 0·03 doped ones, increasing for higher Mn substitution. Seebeck coefficient does not change in all the measured temperature range, independently of Mn content. The improvement in electrical resistivity leads ∼30% higher power factor values for the 0·03 Mn doped samples than that obtained in the undoped ones. The maximum power factor at 800°C, ∼0·28 mW K-2 m-1, is close to that obtained in much higher density samples, clearly indicating the good thermoelectric properties of these samples., The authors wish to thank the Gobierno de Aragón (Research Groups T12 and T87) and the MINECO-FEDER (MAT2013-46505-C3-1-R) for financial support. Authors would also like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. The technical contributions of C. Estepa and C. Gallego are also acknowledged. Sh. Rasekh acknowledges a JAE-PreDoc 2010 grant from CSIC., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of Ag in textured-annealed Bi2Ca2Co1.7Ox thermoelectric ceramic

  • Flahaut, D.
  • Allouche, J.
  • Sotelo, Andres
  • Rasekh, Sh.
  • Torres, M. A.
  • Madre, M. A.
  • Diez, J. C.
Bi2Ca2Co1.7Ox thermoelectric ceramics with small Ag additions (0, 1, 2, 3, 4, and 5 wt.%) have been successfully grown from the melt, using the laser floating zone method and subsequently annealed at 800 °C for 24 h. The microstructure has shown a reduction of the amount of secondary phases for Ag contents up to 4 wt.%. This microstructural evolution leads to a decrease of the electrical resistivity values until an Ag content of 4 wt.%, whereas Seebeck coefficient has been maintained unchanged. This is in agreement with the presence of metallic Ag in all samples, confirmed not only by Energy Dispersive Spectrometry but also by X-ray photoelectron and Auger spectroscopy. These electrical properties lead to maximum power factor values of about 0.30 mW/K2.m at 650 °C for the 4 wt.% Ag containing samples, which is among the best results obtained for this type of materials., This research has been supported by the Spanish MINECO-FEDER (MAT2013-46505-C3-1-R). The authors wish to thank the Gobierno de Aragón-FEDER (Consolidated Research Groups T87 and T12) for financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring Ca3Co4O9 microstructure and performances using a transient liquid phase sintering additive

  • Sotelo, Andres
  • Costa, F. M.
  • Ferreira, Nuno M.
  • Amaral, Vitor S.
  • Amaral, J.S.
  • Rasekh, Sh.
  • Torres, M. A.
  • Madre, M. A.
  • Diez, J. C.
et al., A flexible, adaptable, economical and easily scalable processing route, allowing microstructural control, is presented. It involves classical solid state sintering method and addition of liquid promoting compound. Controlled porosity and high thermoelectric performance have been attained in CaCoO by KCO additions, drastically improving the sintering procedure. KCO behaves as transient liquid phase, providing microstructural benefits, vanishing during sintering. Electrical resistivity was improved by enhanced grains connectivity and growth. Significant increase in Seebeck coefficient at high temperatures has been produced while lattice thermal conductivity was unaffected. The best ZT value, estimated at 800°C, assuming the thermal conductivity value at 140°C, is 0.35 for 5wt.% KCO samples. These values are significantly higher than that obtained in highly-dense textured materials at the same temperature. The results suggest that this approach is very effective for preparing highly-performing CaCoO-based thermoelectric materials with relatively high porosity to control thermal conductivity., The authors wish to thank the MINECO-FEDER (MAT2013-46505-C3-1-R) and Gobierno de Aragón-Fondo Social Europeo (Research Groups T12 and T87) for financial support. This research was also partially supported by FCT, Portugal (IF/00302/2012 and PEst-C), project RECI/CTM-CER/0336/2012 co-financed by FEDER, QREN reference COMPETE: FCOMP-01-0124-FEDER-027465, and the projects financed by national funds through the FCT/MEC: UID/CTM/50025/2013, UID/CTM/50011/2013., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermoelectric properties of directionally grown Bi2Ba2Co2Oδ/Ag composites: effect of annealing

  • Rasekh, Sh.
  • Sotelo, Andres
  • Torres, M. A.
  • Bosque, P.
  • Madre, M. A.
  • Diez, J. C.
Bi2Ba2Co2Oδ thermoelectric ceramics with Ag additions (0, 1, 3, and 5 wt%) have been successfully textured using the laser floating zone method. Microstructure has shown that samples are composed by thermoelectric grains, together with a high amount of secondary phases, and that 3 wt% Ag addition leads to the best grain orientation. These microstructural benefits have been reflected in the highest thermoelectric performances determined in these samples. It has also been found that annealing procedure leads to a drastic decrease of secondary phases amount and raises the oxygen content in the thermoelectric phase. These modifications are reflected in an important decrease of electrical resistivity, ρ (compared to the as-grown samples) without drastic modification of Seebeck coefficient, S. As a consequence, the highest thermoelectric performances, determined through the power factor, have been reached in the 3 wt% Ag textured and annealed samples in the whole measured temperature range. The maximum PF (=S/ρ) values at 650 °C determined in these samples are very close to the highest reported in single crystals or very low rate LFZ grown Bi2Ba2Co2Oδ compounds, making them very attractive for practical applications., This research has been supported by the Spanish MINECO-FEDER (MAT2013-46505-C3-1-R). The authors wish to thank the Gobierno de Aragón and Fondo Social Europeo (Consolidated Research Groups T87 and T12) for financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improved thermoelectric performances in textured Bi1.6Pb0.4Ba2Co2Oy/Ag composites

  • Sotelo, Andres
  • Rasekh, Sh.
  • Torres, M. A.
  • Bosque, P.
  • Madre, M. A.
  • Diez, J. C.
BiPbBaCoO thermoelectric ceramics with small Ag additions (0, 1, 3, and 5 wt%) have been textured using the laser floating zone method. Microstructure has shown a slight decrease on the secondary phases content and a better grain alignment in Ag added samples. These microstructural features are reflected in the thermoelectric properties, which have shown a significant decrease of electrical resistivity, when the Ag content is raised. In spite of a corresponding decrease of Seebeck coefficient, all the Ag-containing samples possess higher Power Factor values than the BiPbBaCoO ones. Moreover, the maximum Power Factor values (about 0.36 mW/K.m at 650 °C) have been measured in BiPbBaCoO+3 wt% Ag samples, which are the best results reported in this family of materials., This research has been supported by the MINECO-FEDER (Project MAT2013-46505-C3-1-R). The authors wish to thank the Gobierno de Aragón (Consolidated Research Groups T87 and T12) for financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improvement of structural and superconducting properties of Bi-2212 textured rods by substituting sodium

  • Nane, O.
  • Özçelik, Bekir
  • Sotelo, Andres
  • Madre, M. A.
In this paper, the physical and superconducting properties of BiSrCaNaCuO with x=0.0, 0.05, 0.075, 0.1, and 0.20 textured superconducting fiber rods prepared by a laser floating zone (LFZ) technique were studied. The effects of Na substitution for Ca have been investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), transport measurements, dc-magnetization, magnetic hysteresis and magnetic critical current density. The powder XRD patterns of samples have indicated that Bi-2212 phase is the major one, independently of Na content. The best critical temperature, T, has been found as 93.3 K from M-T data for the sample with 0.075 Na substitution. The maximum magnetic J value has been calculated as 1.35×10 A/cm at 10 K for the 0.10 Na sample. The maximum transport critical current density has directly been measured as 1.3×10 A/cm at 77 K for the 0.05Na sample., This work is supported by Research Fund of Çukurova University, Adana, Turkey, under Grant contracts no: FBA-2015-3934. M. A. Madre and A. Sotelo wish to thank the Gobierno de Aragón and Fondo Social Europeo (Grupo de Investigacion Consolidado T12) and MINECO-FEDER (project MAT2013-46505-C3-1-R) for financial support. M. A. Madre also acknowledges funding from MINECO-FEDER (Project ENE2014-52105-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High thermoelectric performance in Bi2-xPbxBa2Co2Oy promoted by directional growth and annealing

  • Madre, M. A.
  • Costa, F. M.
  • Ferreira, Nuno M.
  • Rasekh, Sh.
  • Torres, M. A.
  • Diez, J. C.
  • Amaral, Vitor S.
  • Amaral, J.S.
  • Sotelo, Andres
Bi2-xPbxBa2Co2Oy (x=0.0, 0.2, 0.4, and 0.6) misfit compounds were grown by the laser floating zone technique. Microstructural analysis has shown the formation of thermoelectric grains together with high amount of secondary phases. Thermoelectric grains orientation is increased until 0.4Pb, while further substitution drastically destroys the preferential grain orientation. Electrical resistivity is very low compared with the values obtained in sintered materials, spectacularly increasing power factor. Moreover, the performance of these materials was further improved subjecting the as-grown samples to a postannealing step due to the rise of thermoelectric phase content. These microstructural modifications led to a high decrease of electrical resistivity, improving power factor in around a factor two at room temperature, compared with the as-grown samples. Moreover, the low thermal conductivity of the textured annealed samples leads to a maximum estimated ZT value of 0.53 for the 0.2 Pb-doped samples, much higher than the reported in literature., This research has been supported by the Spanish MINECO-FEDER (MAT2013-46505-C3-1-R). The authors wish to thank the Gobierno de Aragón-Fondo Social Europeo (Consolidated Research Groups T12 and T87) for financial support and to C. Gallego, C. Estepa and J. A. Gomez for their technical assistance. The authors also acknowledge the PEst-C/CTM/LA 25/2013-14, RECI/CTM-CER/0336/2012 co-financed by FEDER, QREN reference COMPETE: FCOMP-01-0124-FEDER-027465, “Facing the challenges of characterizing novel thermal materials and processes (Heat@UA)” and CICECO-Aveiro Institute of Materials (Ref. FCT UID /CTM /50011/2013) funding., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Na substitution on superconducting properties of Bi-2212 ceramics prepared by Sinter-Forged process

  • Nane, O.
  • Özçelik, Bekir
  • Sotelo, Andres
  • Madre, M. A.
Bulk textured BiSrCaNaCuO (x = 0.0, 0.05, 0.075 0.1, 0.15, and 0.20) ceramics have been prepared by a polymer solution method followed by sinter-forging process. The microstructure and superconducting properties of textured samples were affected by Na substitution. According to XRD data, all samples show that Bi-2212 phase is the major one, and main peaks corresponded to the (00ℓ) diffractions confirming that the crystallographic c-axis is perpendicular to the surface. SEM micrographs showed that samples are composed of well-stacked and oriented grains. The best critical temperature, T, was measured as 85.6 K for x = 0.075. The critical current density Jc, values decrease gradually with the increase of applied magnetic field. The maximum calculated Jc was 1.38 × 10 A/cm at 10 K for 0.075 Na sample which is about four times higher than the 0.34 × 10 A/cm value determined for the pure sample. The anisotropic properties of these textured materials have been investigated using magnetic measurements., This work is supported by Research Fund of Çukurova University, Adana, Turkey, under grant contracts no: FBA-2014-3500. A. Sotelo and M.A. Madre acknowledge the Gobierno de Aragón and Fondo Social Europeo (Grupo de Investigacion Consolidado T12) and MINECO-FEDER (MAT2013-46505-C3-1-R) for financial support. M.A. Madre also acknowledges MINECO-FEDER (Project ENE2014-52105-R) for funding. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza. This work is also supported by Research Fund of Hakkari University, Turkey, under grant contracts no: MF2014BAP1., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced electrical and thermoelectric properties from textured Bi1.6Pb0.4Ba2Co2Oy/Ag composites

  • Madre, M. A.
  • Rasekh, Sh.
  • Torres, M. A.
  • Bosque, P.
  • Diez, J. C.
  • Sotelo, Andres
Bi1.6Pb0.4Ba2Co2Oy/3 wt% Ag composites have been textured using the laser floating zone technique. Microstructural observations have shown the formation of relatively high amounts of secondary phases and cracks along the plate-like grains in the as-grown materials. In spite of these microstructural features, electrical properties have not been drastically decreased. Annealing of these as-grown rods has enhanced the grains connectivity, decreased the contents of the secondary phases, and healed the cracks, thereby increasing their electrical performances. It has been deduced that oxygen content in the thermoelectric phase has not been significantly modified through annealing, as demonstrated by the very similar Seebeck values at room temperature in the as-grown and annealed samples. As a consequence of the low electrical resistivity values in the annealed materials, they reached higher power factor values than the as-grown ones. The highest power factor at room temperature is in the range of those reported for single crystals, while at 650 °C, it is the highest reported in Bi–Ba–Co–O polycrystalline family so far., This research has been supported by the MINECO-FEDER (Project MAT2013-46505-C3-1-R). The authors wish to thank the Gobierno de Aragón-FEDER (Consolidated Research Groups T87 and T12) for their financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hamiltonian description of the parametrized scalar field in bounded spatial regions

  • Barbero González, Jesús Fernando
  • Margalef-Bentabol, Juan
  • Villaseñor, Eduardo J. S.
19 págs.; 1 app., We study the Hamiltonian formulation for a parametrized scalar field in a regular bounded spatial region subject to Dirichlet, Neumann and Robin boundary conditions. We generalize the work carried out by a number of authors on parametrized field systems to the interesting case where spatial boundaries are present. The configuration space of our models contains both smooth scalar fields defined on the spatial manifold and spacelike embeddings from the spatial manifold to a target spacetime endowed with a fixed Lorentzian background metric. We pay particular attention to the geometry of the infinite dimensional manifold of embeddings and the description of the relevant geometric objects: the symplectic form on the primary constraint submanifold and the Hamiltonian vector fields defined on it. © 2016 IOP Publishing, This work has been supported by the Spanish MINECO research grants FIS2012-34379, FIS2014-57387-C3-3-P and the Consolider-Ingenio 2010 Program CPAN (CSD 2007- 00042). Juan Margalef-Bentabol is supported by a ‘la Caixa’ fellowship., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hamiltonian dynamics of the parametrized electromagnetic field

  • Barbero González, Jesús Fernando
  • Margalef-Bentabol, Juan
  • Villaseñor, Eduardo J. S.
11 págs.; 2 apps., We study the Hamiltonian formulation for a parametrized electromagnetic field with the purpose of clarifying the interplay between parametrization and gauge symmetries. We use a geometric approach which is tailor-made for theories where embeddings are part of the dynamical variables. Our point of view is global and coordinate free. The most important result of the paper is the identification of sectors in the primary constraint submanifold in the phase space of the model where the number of independent components of the Hamiltonian vector fields that define the dynamics changes. This explains the non-trivial behavior of the system and some of its pathologies. © 2016 IOP Publishing, This work has been supported by the Spanish MINECO research grants FIS2012-34379, FIS2014-57387-C3-3-P and the Consolider-Ingenio 2010 Program CPAN (CSD 2007- 00042). Juan Margalef-Bentabol is supported by a ‘la Caixa’ fellowship, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boundary Hilbert spaces and trace operators

  • Barbero González, Jesús Fernando
  • Juárez-Aubry, Benito A.
  • Margalef-Bentabol, Juan
  • Villaseñor, Eduardo J. S.
11 pags., We discuss the introduction of boundary Hilbert spaces for a class of physical systems for which it is not possible to factor their state spaces as tensor products of Hilbert spaces naturally associated to their boundaries and bulks, respectively. In order to do this we make use of the so called trace operators that play a relevant role in the analysis of PDEs in bounded regions. By taking advantage of these operators and some functorial aspects of the construction of Fock spaces, we will show how to obtain quantum dynamics at the boundaries defined in appropriate Hilbert spaces associated with them., This work has been supported by the Spanish MINECO research grant FIS2014-57387-C3-3-P. Benito A Juárez-Aubry is supported by CONACYT, project 101712. Juan Margalef-Bentabol is supported by a 'la Caixa' fellowship and a Residencia de Estudiantes (MINECO) fellowship., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional evolution of scalar fields in bounded one-dimensional regions

  • Barbero González, Jesús Fernando
  • Margalef-Bentabol, Juan
  • Villaseñor, Eduardo J. S.
15 pags., 3 apps., We discuss the unitarity of the quantum evolution between arbitrary Cauchy surfaces of a 1 + 1 dimensional free scalar field defined on a bounded spatial region and subject to several types of boundary conditions including Dirichlet, Neumann and Robin., This work has been supported by the Spanish MINECO research grant FIS2014-57387- C3-3-P. Juan Margalef-Bentabol is supported by a ‘la Caixa’ fellowship and a Residencia de Estudiantes (MINECO) fellowship., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phase diagram of the triangular-lattice Potts antiferromagnet

  • Jacobsen, Jesper Lykke
  • Salas, Jesús
  • Scullard, C. R.
50 pags., 19 figs., 5,2 tabs., app., We study the phase diagram of the triangular-lattice Q-state Potts model in the real -plane, where is the temperature variable. Our first goal is to provide an obviously missing feature of this diagram: the position of the antiferromagnetic critical curve. This curve turns out to possess a bifurcation point with two branches emerging from it, entailing important consequences for the global phase diagram. We have obtained accurate numerical estimates for the position of this curve by combining the transfer-matrix approach for strip graphs with toroidal boundary conditions and the recent method of critical polynomials. The second goal of this work is to study the corresponding RSOS model on the torus, for integer . We clarify its relation to the corresponding Potts model, in particular concerning the role of boundary conditions. For certain values of p, we identify several new critical points and regimes for the RSOS model and we initiate the study of the flows between the corresponding field theories., We thank Alan Sokal for the kind permission to use computational resources (provided by Dell Corporation) at New York University. JS is grateful for the hospitality from 2009 to 2017 of the Laboratoire de Physique Théorique at the École Normale Supérieure where part of this work was done. The research of JLJ was supported in part by the Agence Nationale de la Recherche (grant ANR-10-BLAN-0414: DIME), the Institut Universitaire de France, and the European Research Council (through the advanced grant NuQFT). The research of JLJ and JS was supported in part by Spanish MINECO grant FIS2014-57387-C3-3-P. The work of CRS was performed under the auspices of the U.S. Department of Energy at the Lawrence Livermore National Laboratory under Contract No DE-AC52-07NA27344., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nonlinear observation in fuel cell systems: A comparison between disturbance estimation and High-Order Sliding-Mode techniques

  • Luna, Julio
  • Usai, Elio
  • Husar, Attila
  • Serra-Prat, María
This paper compares two Nonlinear Distributed Parameter Observers (NDPO) for the observation of a Proton Exchange Membrane Fuel Cell (PEMFC). Both NDPOs are based on the discretisation of distributed parameters models and they are used to estimate the state profile of gas concentrations in the anode and cathode gas channels of the PEMFC, giving detailed information about the internal conditions of the system. The reaction and water transport flow rates from the membrane to the channels are uncertainties of the observation problem and they are estimated throughout all the length of the PEMFC without the use of additional sensors. The first observation approach is a Nonlinear Disturbance Observer (NDOB) for the estimation of the disturbances in the NDPO. In the second approach, a novel implementation of a High-Order Sliding-Mode (HOSM) observer is developed to estimate the true value of the states as well as the reaction terms. The proposed observers are tested and compared through a simulation example at different operating points and their performance and robustness is analysed over a given case study, the New European Driving Cycle., This work has been partially funded by the Spanish national project MICAPEM (ref. DPI2015-69286-C3-2R), the Regione Autonoma della Sardegna projectCRP-7733 and the European project PUMA-MIND (ref. SPI-JTI-FCH 303419)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nonlinear predictive control for durability enhancement and efficiency improvement in a fuel cell power system

  • Luna, Julio
  • Jemei, Samir
  • Yousfi-Steiner, Nadia
  • Husar, Attila
  • Serra-Prat, María
  • Hissel, Daniel
In this work, a nonlinear model predictive control (NMPC) strategy is proposed to improve the efficiency and enhance the durability of a proton exchange membrane fuel cell (PEMFC) power system. The PEMFC controller is based on a distributed parameters model that describes the nonlinear dynamics of the system, considering spatial variations along the gas channels. Parasitic power from different system auxiliaries is considered, including the main parasitic losses which are those of the compressor. A nonlinear observer is implemented, based on the discretised model of the PEMFC, to estimate the internal states. This information is included in the cost function of the controller to enhance the durability of the system by means of avoiding local starvation and inappropriate water vapour concentrations. Simulation results are presented to show the performance of the proposed controller over a given case study in an automotive application (New European Driving Cycle). With the aim of representing the most relevant phenomena that affects the PEMFC voltage, the simulation model includes a two-phase water model and the effects of liquid water on the catalyst active area. The control model is a simplified version that does not consider two-phase water dynamics., This work has been partially funded by the Spanish national project MICAPEM (ref. DPI2015-69286-C3-2-R, MINECO/FEDER), the LABEX ACTION (ref. ANR-11-LABX-01-01) and the European project PUMA-MIND (ref. SPI-JTI-FCH 303419)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Distributed parameter model-based control of water activity and concentration of reactants in a polymer electrolyte membrane fuel cell

  • Sarmiento-Carnevali, María Laura
  • Serra-Prat, María
  • Batlle, Carles
Water management is still a key challenge for optimal performance and durability of polymer electrolyte membrane (PEM) fuel cells. Water levels along the channel in a PEM fuel cell present important spatial variations that should be taken into account to avoid both local flooding and local drying. In this work, a decentralised model predictive control scheme is designed to maintain the water activity on both anode and cathode sides of the PEM at appropriate levels. The proposed strategy tackles the accumulation of liquid water on the surface of the catalyst layers, and the possibility of local drying, by controlling observed water activity spatial profiles. Classic PEM fuel cell issues like reactant starvation are also considered. High control performance is achieved. The strategy is applied to a validated distributed parameter PEM fuel cell model. Results show increased cell power density in comparison to non-spatial control strategies., This work was partially funded by Spanish MEC-FPU [grant number AP-2010-3969]; and the Spanish national project MICAPEM (DPI2015-69286-C3-2-R, MINECO/FEDER)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Set-membership approach and Kalman observer based on zonotopes for discrete-time descriptor systems

  • Wang, Ye
  • Puig, Vicenç
  • Cembrano, Gabriela
This paper proposes a set-membership state estimator and a zonotopic Kalman observer for discrete-time descriptor systems. Both approaches are developed in a set-based context considering system disturbances, measurement noise, and unknown inputs. This set-membership state estimation approach determines the set of consistent states with the model and measurements by constructing a parameterized intersection zonotope. Two methods to minimize the size of this intersection zonotope are provided: one inspired by Kalman filtering and the other based on solving an optimization problem involving a series of linear matrix inequalities. Additionally, we propose a zonotopic Kalman observer for discrete-time descriptor systems. Moreover, the relationship between both approaches is discussed. In particular, it is proved that the zonotopic Kalman observer in the current estimation type is equivalent to the set-membership approach. Finally, a numerical example is used to illustrate and compare the effectiveness of the proposed approaches., This work was partially supported by the Spanish State Research Agency (AEI) and the European Regional Development Fund (ERFD) through the projects ECOCIS (ref. DPI2013-48243-C2-1-R), DEOCS (ref. DPI2016-76493-C3-3-R) and HARCRICS (ref. DPI2014-58104-R), and the FPI grant (ref. BES-2014-068319)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficient and accurate modeling of electron photoemission in nanostructures with TDDFT

  • Wopperer, Philipp
  • Giovannini, Umberto de
  • Rubio, Angel
We derive and extend the time-dependent surface-flux method introduced in [L. Tao, A. Scrinzi, New J. Phys. 14, 013021 (2012)] within a time-dependent density-functional theory (TDDFT) formalism and use it to calculate photoelectron spectra and angular distributions of atoms and molecules when excited by laser pulses. We present other, existing computational TDDFT methods that are suitable for the calculation of electron emission in compact spatial regions, and compare their results. We illustrate the performance of the new method by simulating strong-field ionization of C60 fullerene and discuss final state effects in the orbital reconstruction of planar organic molecules., We acknowledge financial support from the European Research Council (ERC-2010-AdG-267374), Spanish grant (FIS2013-46159-C3-1-P) and Grupos Consolidados (IT578-13). This work was partly supported by the European Union’s Horizon 2020 research and innovation program under grant agreement no. 676580 with the Novel Materials Discovery (NOMAD) laboratory, a European Center of Excellence, H2020-NMP-2014 project MOSTOPHOS (GA no. 646259), and the COST Action MP1306 (EUSpec)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spin decoherence of magnetic atoms on surfaces

  • Delgado Ferrer, F.
  • Fernández-Rossier, Joaquín
We review the problem of spin decoherence of magnetic atoms deposited on a surface. Recent breakthroughs in scanning tunnelling microscopy (STM) make it possible to probe the spin dynamics of individual atoms, either isolated or integrated in nanoengineered spin structures. Transport pump and probe techniques with spin polarized tips permit measuring the spin relaxation time T, while novel demonstration of electrically driven STM single spin resonance has provided a direct measurement of the spin coherence time T of an individual magnetic adatom. Here we address the problem of spin decoherence from the theoretical point of view. First we provide a short general overview of decoherence in open quantum systems and we discuss with some detail ambiguities that arise in the case of degenerate spectra, relevant for magnetic atoms. Second, we address the physical mechanisms that allows probing the spin coherence of magnetic atoms on surfaces. Third, we discuss the main spin decoherence mechanisms at work on a surface, most notably, Kondo interaction, but also spin–phonon coupling and dephasing by Johnson noise. Finally, we briefly discuss the implications in the broader context of quantum technologies., JFR acknowledges financial supported by MEC-Spain (FIS2013-47328-C2-2-P) and Generalitat Valenciana (ACOMP/2010/070), Prometeo. This work is funded by ERDF funds through the Portuguese Operational Program for Competitiveness and Internationalization COMPETE 2020, and National Funds through FCT – The Portuguese Foundation for Science and Technology, under the project “PTDC/FIS-NAN/4662/2014” (016656). FD acknowledges funding by the Ministerio de Economía y Competitividad (MINECO, Spain), with grant MAT2015-66888-C3-2-R., and Gobierno Vasco by grant IT986-16. We thank J. Sinova for financial support in the SPICE workshop on “Magnetic adatoms as building blocks for quantum magnetism”., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adsorption of water, methanol, and their mixtures in slit graphite pores

  • Pršlja, P.
  • Lomba, Enrique
  • Gómez-Álvarez, Paula
  • Urbič, Tomaz
  • Noya, Eva G.
The behavior of water, methanol, and water-methanol mixtures confined in narrow slit graphite pores as a function of pore size was investigated by Monte Carlo, hybrid Monte Carlo, and Molecular Dynamics simulations. Interactions were described using TIP4P/2005 for water, OPLS/2016 for methanol, and cross interactions fitted to excess water/methanol properties over the whole range of concentrations, which provide a rather accurate description of water-methanol mixtures. As expected for hydrophobic pores, whereas pure methanol is adsorbed already from the gas phase, pure water only enters the pore at pressures well beyond bulk saturation for all pore sizes considered. When adsorbed from a mixture, however, water adsorbs at much lower pressures due to the formation of hydrogen bonds with previously adsorbed methanol molecules. For all studied compositions and pore sizes, methanol adsorbs preferentially over water at liquid-vapor equilibrium conditions. In pure components, both water and methanol are microscopically structured in layers, the number of layers increasing with pore size. This is also the case in adsorbed mixtures, in which methanol has a higher affinity for the walls. This becomes more evident as the pore widens. Diffusion of pure water is higher than that of pure methanol for all pore sizes due to the larger size of the methyl group. In mixtures, both components present similar diffusivities at all pore sizes, which is explained in terms of the coupling of molecular movements due to strong hydrogen bonding between methanol and water molecules. This is particularly evident in very narrow pores, in which pure methanol diffusion is completely impeded on the time scale of our simulations, but the presence of a small amount of water molecules facilitates alcohol diffusion following a single-file mechanism. Additionally, our results indicate that pure water diffusivities display a non-monotonous dependence of pore size, due to effects of confinement (proximity to a fluid-solid-fluid transition induced by confinement as reported in previous work) and the dynamic anomalies of water., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reconfigurable multiplexed point of Care System for monitoring type 1 diabetes patients

  • Márquez, Augusto
  • Aymerich, Joan
  • Dei, Michele
  • Rodríguez-Rodríguez, Rosalia
  • Vázquez-Carrera, Manuel
  • Pizarro-Delgado, Javier
  • Giménez-Gómez, Pablo
  • Merlos Domingo, Ángel
  • Serra-Graells, Francesc
  • Jiménez-Jorquera, Cecilia
  • Domínguez, Carlos
  • Muñoz-Berbel, Xavier
At the point of care (POC), on-side clinical testing allows fast biomarkers determination even in resource-limited environments. Current POC systems rely on tests selective to a single analyte or complex multiplexed systems with important portability and performance limitations. Hence, there is a need for handheld POC devices enabling the detection of multiple analytes with accuracy and simplicity. Here we present a reconfigurable smartphone-interfaced electrochemical Lab-on-a-Chip (LoC)with two working electrodes for dual analyte determination enabling biomarkers' selection in situ and on-demand. Biomarkers selection was achieved by the use of electrodepositable alginate hydrogels. Alginate membranes containing either glucose oxidase (GOx)or lactate oxidase (LOx)were selectively electrodeposited on the surface of each working electrode in around 4 min, completing sample measurement in less than 1 min. Glucose and lactate determination was performed simultaneously and without cross-talk in buffer, fetal bovine serum (FBS)and whole blood samples, the latter being possible by the size-exclusion filtration capacity of the hydrogels. At optimal conditions, glucose and lactate were determined in a wide linear range (0–12 mM and 0–5 mM, respectively)and with high sensitivities (0.24 and 0.54 μA cm −2 mM −1 , respectively), which allowed monitoring of Type-1 diabetic patients with a simple dual analysis system. After the measurement, membranes were removed by disaggregation with the calcium-chelator phosphate buffer. At this point, new membranes could be electrodeposited, this time being selective to the same or another analyte. This conferred the system with on-demand biomarkers’ selection capacity. The versatility and flexibility of the current architecture is expected to impact in POC analysis in applications ranging from homecare to sanitary emergencies., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Axion searches with microwave filters: The RADES project

  • Álvarez Melcón, Alejandro
  • Arguedas Cuendis, Sergio
  • Cogollos, Cristian
  • Díaz-Morcillo, Alejandro
  • Döbrich, Babette
  • Gallego, Juan Daniel
  • Gimeno, Benito
  • Irastorza, Igor G.
  • Lozano-Guerrero, Antonio José
  • Malbrunot, Chloé
  • Navarro, Pablo
  • Peña-Garay, Carlos
  • Redondo, Javier
  • Vafeiadis, Theodoros
  • Wuensch, Walter
We propose, design and construct a variant of the conventional axion haloscope concept that could be competitive in the search for dark matter axions of masses in the decade 10–100 μeV. Theses masses are located somewhat above the mass range in which existing experiments have reached sensitivity to benchmark QCD axion models. Our haloscope consists of an array of small microwave cavities connected by rectangular irises, in an arrangement commonly used in radio-frequency filters. The size of the unit cavity determines the main resonant frequency, while the possibility to connect a large number of cavities allows to reach large detection volumes. We develop the theoretical framework of the detection concept, and present design prescriptions to optimize detection capabilities. We describe the design and realization of a first small-scale prototype of this concept, called Relic Axion Detector Exploratory Setup (RADES). It consists of a copper-coated stainless steel five-cavities microwave filter with the detecting mode operating at around 8.4 GHz. This structure has been electromagnetically characterized at 2 K and 298 K, and it is now placed in ultra-high vacuum in one of the twin-bores of the 9 T CAST dipole magnet at CERN. We describe the data acquisition system developed for relic axion detection, and present preliminary results of the electromagnetic properties of the microwave filter, which show the potential of filters to reach QCD axion window sensitivity at X-band frequencies., This work has been funded by the Spanish Agencia Estatal de Investigacion (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) under project FPA-2016-76978, and Fundacion Seneca Ref. 20147/EE/17, and was supported by the CERN Doctoral Studentship programme. IGI acknowledges also support from the European Research Council (ERC) under grant ERC-2009-StG-240054 (T-REX project). JR is supported by the Ramon y Cajal Fellowship 2012-10597, the grant FPA2015-65745-P (MINECO/FEDER), the EU through the ITN “Elusives” H2020-MSCA-ITN-2015/674896 and the Deutsche Forschungsgemeinschaft under grant SFB-1258 as a Mercator Fellow. CPG was supported by PROMETEO II/2014/050 of Generalitat Valenciana, FPA2014-57816-P of MINECO and by the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreements 690575 and 674896., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insect antifeedant and ixodicidal compounds from Senecio adenotrichius

  • Ruiz-Vasquez, Liliana
  • Olmeda García, Ángeles Sonia
  • Zúñiga Navarro, Gustavo
  • Villarroel, Luis
  • Echeverri, Luis Fernando
  • González-Coloma, Azucena
  • Reina, Matías
Nine eremophilane sesquiterpenes 1 – 9, two flavonoids 11 and 12, and two known pirrolizidine alkaloids 13 and 14, were isolated from Senecio adenotrichius DC. Their structures were elucidated on the basis of spectroscopic data and by comparison with previously reported spectroscopic data of similar compounds. Compounds 5, 7, and 9 have not been previously reported as natural products. The antifeedant activity of these compounds was tested against Spodoptera litoralis and Myzus persicae. Eremophilanes 1, 3, and 8 were strong antifeedants to M. persicae, and 1 and 8 to Spodoptera littoralis. Their ixodicidal activity was tested against the tick Hyalomma lusitanicum, with eremophilanes 1, 3, and 8, being strong ixodicidal agents., This work has been supported by grants CTQ2012‐38219‐C03‐01, CTQ2015‐64049‐C3‐1‐R, AGL2012‐37957 (MINECO), and Villamagna SA. L. R.‐V. gratefully acknowledges JAE‐CSIC predoctoral fellowship., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Durability and chromatic behavior in cement pastes containingceramic industry milling and glazing by-products

  • Sánchez de Rojas, María Isabel
  • Frías, Moisés
  • Sabador, Elvira
  • Asensio, Eloy
  • Rivera Lozano, Julián
  • Medina, César
The decay in mortar and concrete induced by extremely aggressive agents is nor-mally the result of the agent‐binder reaction. Cement composition and characteris-tics therefore determine the durability of the mortars and concretes of which theyform part. The existing legislation envisages the use of different types of additionsin cement, which have a direct effect on the durability of elements in buildingsand civil works. This study addressed the inclusion of ceramic industry millingand glazing sludge as an active addition in cement. The reuse of this industrialwaste is consistent with environmental policies that seek to reduce or eliminatespoil heaps by recycling industrial waste and byproducts as raw materials, inkeeping with circular economy principles. The research conducted makes an inno-vative contribution to the valorization of this waste, and highlights the resistanceof blended cement pastes to chemical agents, further to the Koch‐Steineggermethod. Water‐induced decay in freeze/thaw situations was also studied. The pro-cesses involved were identified by analyzing the mineralogical variations detectedwith X‐ray diffraction, the morphological alterations observed with scanning elec-tron microscopy and the mercury porosimetric findings on pore size distribution.The suitability of these binders for aesthetically demanding applications was alsoexplored by measuring the color in pastes exposed to aggressive chemical agents.For the first time, a correlation was established between color parameters and theformation of the reaction products generated during chemical attack, This research was funded by several Spanish Ministries (Projects BIA 2013‐48876‐C3‐1‐R, BIA 2013‐48876‐C3‐2‐R, BIA2016‐76643‐C3‐1‐R). Supply of the ceramic sludge used in this study by ADICEM Valorización S.L. is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reuse of coal mining waste to lengthen the service life of cementitious matrices

  • Caneda-Martínez, Laura
  • Frías, Moisés
  • Sánchez-Montero, Javier
  • Medina, César
  • Sánchez de Rojas, María Isabel
A chloride-induced accelerated corrosion test was conducted on steel bars embedded in mortar specimensprepared with thermally activated coal mining waste (ACMW). ACMW was observed to prompt two oppositeeffects: a delay in chloride ion penetration and a reduction in the critical chloride content needed to initiatecorrosion. Service life predictions based on thefindings revealed that adding 20% or 50% ACMW to cementimproved reinforcement corrosion resistance. Optimal results were observed for 20% replacement, in which themean reinforcement section loss was 21% lower than in OPC, Funding for this research was provided by the Spanish Ministry of the Economy and Competitiveness (MINECO) and the European Regional Development Fund (ERDF) [ref. BIA-2015-65558-C3-1,2,3-R], as well as by the Spanish Training Programme (MINECO) and the European Social Fund (ESF) [ref. BES-2016-078454]. The support received from Sociedad Anónima Hullera Vasco-Leonesa, SIKA (Madrid, Spain) and the Instituto Español del Cemento y sus Aplicaciones (IECA, Spanish cement institute) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Heteropolysaccharide-producing bifidobacteria for the development of functional dairy products

  • Llamas, M. G.
  • Peirotén, Ángela
  • Puertas, A. I.
  • Prieto Orzanco, Alicia
  • López García, Paloma
  • Pardo, Miguel Ángel
  • Rodríguez, Eva
  • Dueñas, María Teresa
Bifidobacterium longum INIA P132 and Bifidobacterium infantis INIA P731, isolated from infant-faeces, were investigated in this work. Regarding the probiotic and technological potential of the bifidobacteria, both were resistant to gastrointestinal tract simulated conditions. B. longum showed high survival upon freezing and thawing as well as lyophilisation and was able to grow in milk. B. infantis had higher adhesion capacity to human Caco-2 cells than the commercial probiotic Bifidobacterium animalis BB12 strain. Moreover, both bacteria secrete heteropolysaccharides (HePS) composed of rhamnose, galactose and glucose. In a dextran sodium sulphate-induced enterocolitis model in zebra fish larvae, treatment with each HePS preparation resulted in a decrease of the larval mortality. In addition, the HePS from B. longum immunomodulated in vitro human macrophages treated with the inflammatory Escherichia coli O111:B4 lipopolysaccharide. Thus, both studied bifidobacteria and their HePS have potential beneficial effects on health and thus, to their application in functional foods., This work was supported by a grant from de Department of Environment, Territorial Planification, Agriculture and Fishing and the project no. IT 866-13 from the Basque Government, by the Spanish Ministry of Science and Innovation (AGL 2015-65010-C3-1-R) and by the Spanish Ministry of Economy and Competitiveness (RM12-00004-00-00 and RTA2013-00029-00-00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Arecibo Pisces-Perseus Supercluster Survey. I. Harvesting ALFALFA

  • O'Donoghue, A. A.
  • Haynes, Martha P.
  • Koopmann, R. A.
  • Jones, M. G.
  • Giovanelli, R.
  • Balonek, Thomas J.
  • Craig, David W.
  • Hallenbeck, G. L.
  • Hoffman, G. Lyle
  • Kornreich, D. A.
  • Leisman, L.
  • Miller, J. R.
We report a multi-objective campaign of targeted 21 cm H i line observations of sources selected from the Arecibo Legacy Fast Arecibo L-band Feed Array (ALFALFA) survey and galaxies identified by their morphological and photometric properties in the Sloan Digital Sky Survey. The aims of this program have been (1) to confirm the reality of some ALFALFA sources whose enigmatic nature suggest additional multiwavelength observations; (2) to probe the low signal-to-noise ratio (S/N) regime, below the ALFALFA reliability limit; and (3) to explore the feasibility of using optical morphology, color, and surface brightness to identify gas-rich objects in the region of the Pisces-Perseus Supercluster (PPS) whose H i fluxes are below the ALFALFA sensitivity limit at that distance. As expected, the reliability of ALFALFA detections depends strongly on the S/N of the H i line signal and its coincidence with a probable stellar counterpart identified by its optical properties, suggestive of ongoing star formation. The identification of low-mass, star-forming populations enables targeted H i line observations to detect galaxies with H i line fluxes below the ALFALFA sensitivity limits in fixed local volumes (D < 100 Mpc). The method explored here serves as the basis for extending the sample of gas-bearing objects as part of the ongoing Arecibo Pisces-Perseus Supercluster Survey (APPSS). © 2019. The American Astronomical Society. All rights reserved., This work has been supported by NSF grants AST-1211005, AST-1637339, and AST-1637271. R.G., M.P.H., L.L., and M.G.J. acknowledge support from NSF grants AST-1107390 and AST-1714828 and by grants from the Brinson Foundation. M.G.J. acknowledges support from the grant AYA2015-65973-C3-1-R (MINECO/FEDER, UE)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Live Demonstration: A Portable Microsensor Fusion System with Real-Time Measurement for On-Site Beverage Tasting

  • Margarit-Taulé, Josep Maria
  • Giménez-Gómez, Pablo
  • Escudé-Pujol, Roger
  • Gutiérrez-Capitán, Manuel
  • Rovira, Meritxell
  • Jiménez, Cecilia
  • Liu, Shih-Chii
We demonstrate a portable multisensor fusion system for the automated analysis of multiple beverages. The system makes use of compact and low-power-consumption electronic equipment to simultaneously read out an array of microsensors formed by six ion-selective field-effect transistors (ISFETs), one conductivity sensor, one redox potential sensor, and two amperometric microelectrodes. A custom Python application running on a laptop computer receives real-time multivariate data via USB, and provides chemometric models to classify different varieties and to quantify relevant parameters of mineral water and wine. The software also includes a graphical user interface (GUI) to visualize readouts and analytical estimates., This work has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 747848, and from the Spanish national research and innovation program (MINECO, ref. TEC2014-54449-C3-1-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Protein matrices ensure safe and functional delivery of rosmarinic acid from marjoram (Origanum majorana) extracts

  • Arranz, Elena
  • Villalva, Marisol
  • Guri, Anilda
  • Ortego, Elena
  • Jaime, Laura
  • Reglero, Guillermo
  • Santoyo, Susana
  • Corredig, Milena
[Background] To understand the interactions between carriers and functional ingredients is crucial when designing delivery systems, to maximize bioefficacy and functionality. In this study, two different protein matrices were evaluated as means to protect the extract isolated from marjoram leaves (Origanum majorana), casein micelles from fresh skim milk and soy protein isolate (SPI)., [Results] Marjoram extract was obtained from pressurization of ethanol and water solvent. Protein dispersions of casein and SPI (5 g L-1 each) with or without marjoram extract (0.1-3 mg mL-1 ) were prepared and homogenized. The physicochemical characterization of charge and entrapment efficiency were conducted. The results demonstrated that entrapment efficiency was highly dependent on the carrier itself where SPI formulations showed 20% higher affinity when compared to casein micelles. To investigate the physiological behaviour of the marjoram-protein dispersions, human macrophages were employed. A non-specific inflammatory response of macrophages stimulated with bacterial lipopolysaccharide was measured for TNF-α, IL-1β and IL-6 cytokine secretion., [Conclusion] Casein and SPI protein formulations warranted high bioefficacy of marjoram extract, showing their potential as safe carriers., This work was partly funded by the Natural Sciences and Engineering Council of Canada, through the Canada Research Chair programme and Dairy Farmers of Ontario. EA work was supported by the Alfonso Martin Escudero Foundation, through a Post-Doctoral Fellowship. Financial support was from the Spanish Government (FORCHRONIC Project: ALG-2016-2076 736-C3-1-R), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adversarial classification: an adversarial risk analysis approach

  • Naveiro Flores, Roi
  • Redondo, Alberto.
  • Ríos Insua, David
  • Ruggeri, Fabrizio
Classification techniques are widely used in security settings in which data can be deliberately manipulated by an adversary trying to evade detection and achieve some benefit. However, traditional classification systems are not robust to such data modifications. Most attempts to enhance classification algorithms in adversarial environments have focused on game theoretical ideas under strong underlying common knowledge assumptions, which are not actually realistic in security domains. We provide an alternative framework to such problems based on adversarial risk analysis which we illustrate with examples. Computational, implementation and robustness issues are discussed., R.N. acknowledges support the Spanish Ministry for his grant FPU15-03636. The work of D.R.I. is supported by the Spanish Ministry program MTM2017-86875-C3-1-R and the AXA-ICMAT Chair on Adversarial Risk Analysis. This work has also been partially supported by the Spanish Ministry of Economy through the Severo Ochoa Program for Centers of Excellence in R&D (SEV-2015-0554), the project MTM2015-72907-EXP and the EU's Horizon 2020 project 740920 CYBECO (Supporting Cyberinsurance from a Behavioural Choice Perspective). F.R. acknowledges the contribution of the Comunidad de Madrid through its Chair of Excellence programme. We are grateful for the suggestions of the referees., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Critical networked infrastructure protection from adversaries

  • Quijano, Eduardo
  • Ríos Insua, David
  • Cano, Javier
We use the adversarial risk analysis (ARA) framework to deal with the protection of a critical networked infrastructure from the attacks of intelligent adversaries. We deploy an ARA model for each relevant element (node, link, hotspot in link) in the network, using a Sequential Defend¿Attack¿Defend template as a reference. Such ARA models are related by resource constraints and result aggregation over various sites, for both the Defender and the Attacker. As a case study, we consider the protection of a section of the Spanish railway network from a potential terrorist attack., This work was supported by the Spanish Ministry of Economy and Innovation program MTM-2014-56949-C3-1-R, the ESF-COST Action IS1304 on Expert Judgement and the AXA-ICMAT Chair on Adversarial Risk Analysis. It also received funding from the European Union's Seventh Framework Programme for Research, Technological Development and Demonstration under grant agreement no. 285223. Discussions with referees are gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Water transport in binary eco-cements containing coal mining waste

  • Caneda-Martínez, Laura
  • Medina, César
  • Sánchez de Rojas, María Isabel
  • Frías, Moisés
This study explores certain indirect, water transport-related durability indicators for mortars made with cement in which 20% or 50% of the ordinary portland cement (OPC) is replaced by thermally activated coal mining waste (ACMW). The valorisation of ACMW is triply beneficial, environmentally speaking, for it reduces waste stockpiling and its processing emits less CO2 and requires less fossil fuel-based energy than OPC manufacture. Its addition was observed to generate a finer pore structure and a larger volume of pores accessible to water. In mortars with 50% ACMW, pore volume rose by approximately 30%, lowering density and consequently mechanical strength. Total water absorption declined by 13% and capillary absorption by 24% in mortars with 20% ACMW, whilst no significant variations in either parameter relative to the OPC reference were found in the materials with 50% replacement ratios. Permeability to water penetration under pressure rose substantially in both blended mortars, although as the maximum and mean depth values lay within the limits specified in Spain's structural concrete code, the materials would be classified as impermeable. The mortars with 20% replacement exhibited no greater drying shrinkage than the OPC materials, whereas the mortars bearing 50% ACMW shrank by approximately 50% more than the reference., Funding for this research was provided by the Spanish Ministry of the Economy and Competitiveness (MINECO) and the European Regional Development Fund [ref. BIA-2015-65558-C3-1,2,3-R], as well as by the Spanish Training Programme (MINECO) and the European Social Fund [ref. BES-2016-078454]. The support received from the Instituto Español del Cemento y sus Aplicaciones (IECA, Spanish cement institute), SIKA (Madrid, Spain) and Sociedad Anónima Hullera Vasco-Leonesa is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cut-off low systems over Iraq: Contribution to annual precipitation and synoptic analysis of extreme events

  • Al-Nassar, Ali Raheem Tuaimah
  • Pelegrí, Josep Lluís
  • Sangrà, Pablo
  • Alarcón Jordán, Marta
  • Jansà, Agustin
19 pages, 14 figures, 1 table, supporting information https://doi.org/10.1002/joc.6247, We combine daily in situ precipitation data with meteorological reanalysis data in order to explore the contribution of cut-off low systems to the seasonal and inter-annual rainfall variations over Baghdad from 2005 to 2016. During these 12 years (average rainfall of 131 ± 67 mm/year), 38 rainy cut-off lows brought 43% of the total precipitation, with extreme inter-annual variations. Indeed, precipitation associated with autumn cut-off lows was the principal factor that turned an arid into a wet year: during the three most arid years cut-off lows contributed about 25% of the average rainfall (10 out of 40 mm/year) while during the three wettest years they contributed near 67% (171 out of 254 mm/year). The extreme-rain cut-off low systems displayed analogous synoptic characteristics: upper-atmosphere divergence, upwards vertical motions in the middle atmosphere, and lower-atmosphere winds into central Iraq at times when the surface Red Sea and Persian Gulf waters were warmer than the surface air. During those days previous to an extreme event, the surface waters cooled substantially and the amount of precipitable water increased largely, suggesting high latent heat transfer. In order to characterize those conditions that favour rainfall, we focus on the November 18–20, 2013 cut-off low system, which led to the largest flooding and wettest year in Baghdad between 2005 and 2016. The distribution of properties in the middle (500 hPa) and upper (250 hPa) troposphere shows that the region was affected by intense horizontal divergence and upwards motions, coinciding with a surface low over the Arabian Peninsula that caused intense northwards winds over the Persian Gulf and brought substantial moisture to central Iraq. The analysis of several stability indexes indicates that convective instability played a secondary role during the episode., This work has been supported by projects VA‐DE‐RETRO (CTM2014‐56987‐P), FLUXES (CTM2015‐69392‐C3‐3‐R), TECBIOMET (CTM2017‐89565‐C2‐1‐P), and SAGA (RTI2018‐100844‐B‐C33), funded by the Spanish government. Ali Raheem Al‐Nassar wishes to thank the Iraqi Ministry of Higher Education and Scientific Research and the Mustansiriyah University for their support to carry out this research, With the funding support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), of the Spanish Research Agency (AEI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Boosting photoelectrochemical water oxidation of hematite in acidic electrolytes by surface state modification

  • Tang, Peng-Yi
  • Han, Li-Juan
  • Simone Hegner, Franziska
  • Paciok, Paul
  • Biset-Peiró, Martí
  • Du, Hong-Chu
  • Wei, Xian-Kui
  • Jin, Lei
  • Xie, Haibing
  • Shi, Qin
  • Andreu, Teresa
  • Lira-Cantú, Mónica
  • Heggen, Marc
  • Dunin-Borkowski, Rafal E.
  • López, Núria
  • Galán-Mascarós, José Ramón
  • Morante, Joan Ramón
  • Arbiol, Jordi
State-of-the-art water-oxidation catalysts (WOCs) in acidic electrolytes usually contain expensive noble metals such as ruthenium and iridium. However, they too expensive to be implemented broadly in semiconductor photoanodes for photoelectrochemical (PEC) water splitting devices. Here, an Earth-abundant CoFe Prussian blue analogue (CoFe-PBA) is incorporated with core–shell Fe2O3/Fe2TiO5 type II heterojunction nanowires as composite photoanodes for PEC water splitting. Those deliver a high photocurrent of 1.25 mA cm−2 at 1.23 V versus reversible reference electrode in acidic electrolytes (pH = 1). The enhancement arises from the synergic behavior between the successive decoration of the hematite surface with nanolayers of Fe2TiO5 and then, CoFe-PBA. The underlying physical mechanism of performance enhancement through formation of the Fe2O3/Fe2TiO5/ CoFe-PBA heterostructure reveals that the surface states’ electronic levels of hematite are modified such that an interfacial charge transfer becomes kinetically favorable. These findings open new pathways for the future design of cheap and efficient hematite-based photoanodes in acidic electrolytes., This work was supported by the Spanish Ministerio de Economia y Competitividad (MINECO, Grants CTQ2015-71287-R, CTQ2015-71287-R, and CTQ2015-68770-R) and the coordinated Project ValPEC (ENE2017-85087-C3), the BIST Ignite Project inWOC2 and the Generalitat de Catalunya (2017 SGR 90, 2017 SGR 327, 2017 SGR 329, 2017 SGR 1246, and 2017 SGR 1406). ICN2 acknowledges the support from the Severo Ochoa Program (MINECO, Grant SEV-2017-0706). ICN2, ICIQ, and IREC are funded by the CERCA Programme/Generalitat de Catalunya. P.Y.T. acknowledges the scholarship support of DAAD short term grant. H.C.D. acknowledges support from the Deutsche Forschungsgemeinschaft (SFB 917). F.S.H. thanks the “LaCaixa”-Severo Ochoa International Programme (Programa internacional de Becas “LaCaixa”- Severo Ochoa) for a Ph.D. fellowship. P.P. and M.H. thank for the support by the Federal Ministry for Economic Affairs and Energy (BMWi) (Fundingregistration number: 03ET6080E). M.L. thanks the COST Action StableNextSol project MP1307, supported by COST (European Cooperation in Science and Technology). H.X. acknowledges the Spanish MINECO through the Severo Ochoa Centers of Excellence Program under Grant SEV-2013-0295 for the postdoctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combined high catalytic activity and efficient polar tubular nanostructure in urchin‐like metallic NiCo2Se4 for high‐performance lithium–sulfur batteries

  • Zhang, Chaoqi
  • Jacas Biendicho, Jordi
  • Zhang, Ting
  • Du, Ruifeng
  • Li, Junshan
  • Yang, Xuhui
  • Arbiol, Jordi
  • Zhou, Yingtang
  • Morante, Joan Ramón
  • Cabot, Andreu
Urchin‐shaped NiCo2Se4 (u‐NCSe) nanostructures as efficient sulfur hosts are synthesized to overcome the limitations of lithium–sulfur batteries (LSBs). u‐NCSe provides a beneficial hollow structure to relieve volumetric expansion, a superior electrical conductivity to improve electron transfer, a high polarity to promote absorption of lithium polysulfides (LiPS), and outstanding electrocatalytic activity to accelerate LiPS conversion kinetics. Owing to these excellent qualities as cathode for LSBs, S@u‐NCSe delivers outstanding initial capacities up to 1403 mAh g−1 at 0.1 C and retains 626 mAh g−1 at 5 C with exceptional rate performance. More significantly, a very low capacity decay rate of only 0.016% per cycle is obtained after 2000 cycles at 3 C. Even at high sulfur loading (3.2 mg cm−2), a reversible capacity of 557 mAh g−1 is delivered after 600 cycles at 1 C. Density functional theory calculations further confirm the strong interaction between NCSe and LiPS, and cytotoxicity measurements prove the biocompatibility of NCSe. This work not only demonstrates that transition metal selenides can be promising candidates as sulfur host materials, but also provides a strategy for the rational design and the development of LSBs with long‐life and high‐rate electrochemical performance., This work corresponds to an extension of activities initially performed around the objectives defined by the Helis project which received funding from the European Union's Horizon 2020 program under the Grant Agreement No. 666221. The authors acknowledge funding from Generalitat de Catalunya2017 SGR 1246 and 2017 SGR 327, the Spanish MINECO projects ENE2016‐77798‐C4‐3‐R and ENE2017‐85087‐C3, and the Zhou Shan Science and Technology Project (2018C21010). C. Zhang and T. Zhang thank the China Scholarship Council (CSC) for scholarship support. IREC acknowledges funding from European Regional Development Funds (ERDF‐FEDER Programa Competitivitat de Catalunya 2007–2013). ICN2 was supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV‐2017‐0706) and was funded by the CERCA Programme/Generalitat de Catalunya., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Degradation and regeneration mechanisms of NiO protective layers deposited by ALD on photoanodes

  • Ros, Carles
  • Andreu, Teresa
  • David, Jeremy
  • Arbiol, Jordi
  • Morante, Joan Ramón
The use of high pH electrolytes requires protective layers to avoid corrosion in photoanodes based on semiconductors like silicon. NiO is one of the materials that comply with the requirements for transparency, conductivity, chemical stability and catalysis on the surface in contact with the electrolyte. Here, NiO layers have been deposited by atomic layer deposition (ALD) at low temperatures, and their stability is analyzed over 1000 hours. Due to the layer structure characteristics, the best overall performance was achieved at 100 °C deposition temperature. By electrochemical measurements progressive time dependent degradation under anodic working conditions is observed, attributed to the formation of higher nickel oxidation states at the electrode/electrolyte interface as a main degradation mechanism, resulting in an OER overpotential increase. Another minor degradation mechanism affects the optical surface quality and gives rise to a loss of photon absorption efficiency on the scale of hundreds of hours. A regeneration process based on in situ periodic cyclic voltammetry, bringing the electrodes to cathodic conditions every 3, 12 or 48 hours, has been shown to partially reverse the main degradation mechanism achieving 85% stability over 1000 hours in a study with over 10 mA cm−2 photocurrent densities., Authors from the IREC acknowledge Generalitat de Catalunya for financial support through the CERCA Programme, M2E (2014SGR1638). The IREC also acknowledges additional support through the European Regional Development Funds (ERDF, FEDER) and MINECO coordinated projects MAT2014-59961-C2, ENE2016-80788-C5-5-R and ENE2017-85087-C3. C. R. acknowledges the MINECO for his FPI grant (BES-2015-071618). The ICN2 was supported by the Severo Ochoa program from the Spanish MINECO (Grant No. SEV-2017-0706) and was funded by the CERCA Programme/Generalitat de Catalunya. The ICN2 acknowledges funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project ENE2017-85087-C3. J. D. received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 665919 (P-SPHERE) co-funded by the Severo Ochoa Programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hierarchical porous Ni3S4 with enriched high‐valence Ni sites as a robust electrocatalyst for efficient oxygen evolution reaction

  • Wan, Kai
  • Luo, Jiangshui
  • Zhou, Chen
  • Zhang, Ting
  • Arbiol, Jordi
  • Lu, Xihong
  • Mao, Bing-Wei
  • Zhang, Xuan
  • Fransaer, Jan
Electrochemical water splitting is a common way to produce hydrogen gas, but the sluggish kinetics of the oxygen evolution reaction (OER) significantly limits the overall energy conversion efficiency of water splitting. In this work, a highly active and stable, meso–macro hierarchical porous Ni3S4 architecture, enriched in Ni3+ is designed as an advanced electrocatalyst for OER. The obtained Ni3S4 architectures exhibit a relatively low overpotential of 257 mV at 10 mA cm−2 and 300 mV at 50 mA cm−2. Additionally, this Ni3S4 catalyst has excellent long‐term stability (no degradation after 300 h at 50 mA cm−2). The outstanding OER performance is due to the high concentration of Ni3+ and the meso–macro hierarchical porous structure. The presence of Ni3+ enhances the chemisorption of OH−, which facilitates electron transfer to the surface during OER. The hierarchical porosity increases the number of exposed active sites, and facilitates mass transport. A water‐splitting electrolyzer using the prepared Ni3S4 as the anode catalyst and Pt/C as the cathode catalyst achieves a low cell voltage of 1.51 V at 10 mA cm−2. Therefore, this work provides a new strategy for the rational design of highly active OER electrocatalysts with high valence Ni3+ and hierarchical porous architectures., K.W. is grateful to the Oversea Study Program of Guangzhou Elite Project. The Open Project Program of Provincial Key Laboratory of Clean Energy Materials, Longyan University (QJNY‐201705) is also acknowledged. X.Z. is grateful to the China Scholarship Council. J.L. acknowledges the Research Foundation – Flanders (FWO) for a Research Project (G0B3218N) and a Research Grant (1529816N). Funding from the National Natural Science Foundation of China (No. 21776120), and “Minjiang Scholar” Program and key project (No. JZ160480) of Department of Education, Fujian Province, China is also acknowledged. ICN2 members acknowledge funding from Generalitat de Catalunya2017 SGR 327 and the Spanish MINECO project VALPEC (ENE2017‐85087‐C3). ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant No. SEV‐2013‐0295) and was funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work was performed in the framework of Universitat Autònoma de Barcelona Materials Science Ph.D. program. T.Z. received funding from the CSC‐UAB Ph.D. scholarship program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multilayered hematite nanowires with thin‐film silicon photovoltaics in an all‐earth‐abundant hybrid tandem device for solar water splitting

  • Urbain, Félix
  • Tang, Peng-Yi
  • Smirnov, Vladimir
  • Welter, Katharina
  • Andreu, Teresa
  • Finger, Friedhelm
  • Arbiol, Jordi
  • Morante, Joan Ramón
The concept of hybrid tandem device structures that combine metal oxides with thin‐film semiconducting photoabsorbers holds great promise for large‐scale, robust, and cost‐effective bias‐free photoelectrochemical water splitting (PEC‐WS). This work highlights important steps toward the efficient coupling of high‐performance hematite photoanodes with multijunction thin‐film silicon photocathodes providing high bias‐free photocurrent density. The hybrid PEC‐WS device is optimized by testing three types of multijunction silicon photocathodes with the hematite photoanode: amorphous silicon (a‐Si:H) tandem: a‐Si:H/a‐Si:H and triple junction with microcrystalline silicon (μc‐Si:H): a‐Si:H/a‐Si:H/μc‐Si:H and a‐Si:H/μc‐Si:H/μc‐Si:H. The results provide evidence that the multijunction structures offer high flexibility for hybrid tandem devices with regard to tunable photovoltages and spectral matching. Furthermore, both photoanode and photocathode are tested under various electrolyte and light concentration conditions, respectively, with respect to their photoelectrochemical performance and stability. A 27 % enhancement in the solar‐to‐hydrogen conversion efficiency is observed upon concentrating light from 100 to 300 mW cm−2. Ultimately, bias‐free water splitting is demonstrated, with a photocurrent density of 4.6 mA cm−2 (under concentrated illumination) paired with excellent operation stability for more than 24 h of the all‐earth‐abundant and low‐cost hematite/silicon tandem PEC‐WS device., The authors acknowledge funding from Generalitat de Catalunya through the CERCA program, 2017 SGR 1246, 2017 SGR 327 and the Spanish MINECO projects MAT2014‐59961, ENE2016‐80788‐C5‐5‐R and ENE2017‐85087, together with the support from REPSOL, S. A. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV‐2017‐0706). IREC also acknowledges additional support from the European Regional Development Funds (ERDF, FEDER), (S)TEM part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program and the rest in the Nanoscience program of the University of Barcelona. The authors thank S. Moll (IEK‐5), M. Biset‐Peiró (IREC), and H. Xie (IREC) for their contribution to this work. F.U. acknowledges financial support from MINECO through Juan de la Cierva fellowship (FJCI‐2016–29147).V.S., K.W., and F.F. (authors from IEK‐5) thank the Deutsche Forschungsgemeinschaft (DFG) (Priority Program SPP 1613)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of boron and phosphorus in enhanced electrocatalytic oxygen evolution by nickel borides and nickel phosphides

  • Masa, Justus
  • Andronescu, Corina
  • Antoni, Hendrik
  • Sinev, Ilya
  • Seisel, Sabine
  • Elumeeva, Karina
  • Barwe, Stefan
  • Martí-Sànchez, Sara
  • Arbiol, Jordi
  • Roldán Cuenya, Beatriz
  • Muhler, Martin
  • Schuhmann, Wolfgang
The modification of nickel with boron or phosphorus leads to significant enhancement of its electrocatalytic activity for the oxygen evolution reaction (OER). However, the precise role of the guest elements, B and P, in enhancing the OER of the host element (Ni) remains unclear. Herein, we present insight into the role of B and P in enhancing electrocatalysis of oxygen evolution by nickel borides and nickel phosphides. The apparent activation energy, Ea*, of electrocatalytic oxygen evolution on Ni2P was 78.4 kJ/mol, on Ni2B 65.4 kJ/mol, and on Ni nanoparticles 94.0 kJ/mol, thus revealing that both B and P affect the intrinsic activity of nickel. XPS data revealed shifts of −0.30 and 0.40 eV in the binding energy of the Ni 2p3/2 peak of Ni2B and Ni2P, respectively, with respect to that of pure Ni at 852.60 eV, thus indicating that B and P induce opposite electronic effects on the surface electronic structure of Ni. The origin of enhanced activity for oxygen evolution cannot, therefore, be attributed to such electronic modification or ligand effect. Severe changes induced on the nickel lattice, specifically, the Ni‐Ni atomic order and interatomic distances (strain effect), by the presence of the guest atoms seem to be the dominant factors responsible for enhanced activity of oxygen evolution in nickel borides and nickel phosphides., The authors acknowledge support by the BMBF in the framework of the project “NEMEZU” (03SF0497B). SMS acknowledges funding from “Programa Internacional de Becas ”la Caixa“‐Severo Ochoa”. J.A. and S.M.S. acknowledge funding from Generalitat de Catalunya 2017 SGR 327 and the Spanish MINECO project VALPEC (ENE2017‐85087‐C3). ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV‐2013‐0295) and is funded by the CERCA Programme/Generalitat de Catalunya. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailor-made metal-nitrogen-carbon bifunctional electrocatalysts for rechargeable Zn-air batteries via controllable MOF units

  • Zhang, Xuan
  • Luo, Jiangshui
  • Lin, Heng-Fu
  • Tang, Peng-Yi
  • Morante, Joan Ramón
  • Arbiol, Jordi
  • Wan, Kai
  • Mao, Bing-Wei
  • Liu, Li-Min
  • Fransaer, Jan
The majority of chemical syntheses involve the use of catalysts, which play a crucial role in the yield and conversion rates of chemical reactions. In view of the increasing demand for chemical commodities and specialties linked to the growth of the world's population and the living standards, highly efficient and low-cost catalysts are urgently required. The metal-nitrogen-carbon (M-N-C) catalysts family is one of the most promising candidates. In this work, a series of benzene-1,3,5-tricarboxylate linker based metal organic frameworks (MOFs) were used as self-sacrificial templates and tunable platform for designable preparation of M-N-C catalysts. Changing the pillars between the 2D layers and the nature of the metal ions in the pristine MOFs significantly influenced the structure, chemical composition and catalytic activity of the resulting M-N-C catalysts for the oxygen reduction reaction (ORR). Furthermore, the influence of the MOF units on the catalyst performance, the role of the metals in the M-N-C catalysts and the primary catalytically active sites for ORR were explored by a combination of density functional theory (DFT), in-depth structural and chemical/elemental characterizations, and electrochemical studies. Among the prepared catalysts, Co-BTC-bipy-700 exhibited the highest electrocatalytic activity for oxygen reduction reaction (ORR), which showed a larger limiting current density and similar half-wave potentials with less catalyst degradation and much higher methanol tolerance than the commercial Pt/C catalyst. Meanwhile, as a bifunctional electrocatalyst, Co-BTC-bipy-700 catalyst was also employed for oxygen evolution reaction (OER) and demonstrated a lower overpotential (lowered by 140 mV at a current density of 10 mA cm−2) and better durability than IrO2. Furthermore, in terms of device performance, the Zn-air battery enabled by Co-BTC-bipy-700 catalyst reached a maximum specific energy as high as 1009.8 Wh kg−1, which is 76.5% of the theoretical value (1320 Wh kg−1), and demonstrated higher discharge potential and lower charge potential than that based on the Pt/C catalyst. Importantly, the presented strategy for tailor-made M-N-C catalysts by controlling the synthesis of the pristine MOFs could offer a guide map for the future design of M-N-C catalysts family not only for electrochemical reactions but also beyond electrochemistry., X. Zhang is grateful to China Scholarship Council (China). J. Luo acknowledges the Research Foundation – Flanders (FWO, Belgium) for a Research Project (G0B3218N), Research Grant (1529816N) and a travel grant (V410316N) for a Visiting Professorship at the Technical University of Denmark. Heng-Fu Lin acknowledges the National Natural Science Foundation of China (11747154) and Tianhe-2JK computing time allocation at the Beijing Computational Science Research Center (CSRC, China). ICN2 and IREC acknowledge, respectively, funding from Generalitat de Catalunya 2017 SGR 327 and 1246 (Spain); the Spanish MINECO coordinated project VALPEC (ENE2017-85087-C3), Spain. ICN2 acknowledges support from the Severo Ochoa Programme (MINECO, Grant no. SEV-2013-0295, SEV-2017-0706), Spain. Likewise, ICN2 and IREC are funded by the CERCA Programme / Generalitat de Catalunya, Spain. Part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program. JRM is belonging to University of Barcelona. Funding from the National Natural Science Foundation of China (No. 21776120, China), "Minjiang Scholar" Program and key project (No. JZ160480, China) of Department of Education, Fujian Province, China, and Open Project (No. 201607, China) of State Key Laboratory of Physical Chemistry of Solid Surfaces, Xiamen University is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Upscaling high activity oxygen evolution catalysts based on CoFe2O4 nanoparticles supported on nickel foam for power-to-gas electrochemical conversion with energy efficiencies above 80%

  • Urbain, Félix
  • Du, Ruifeng
  • Tang, Peng-Yi
  • Smirnov, Vladimir
  • Andreu, Teresa
  • Finger, Friedhelm
  • Divins, Núria J.
  • Llorca, Jordi
  • Arbiol, Jordi
  • Cabot, Andreu
  • Morante, Joan Ramón
We investigate cobalt ferrite nanoparticles (NPs) supported on large-scale electrodes as oxygen evolution reaction (OER) catalysts. Colloidal CoFe2O4 NPs were loaded on low-cost and high surface area nickel foam (NF) scaffolds. The coating process was optimized for large electrode areas, ensuring a proper distribution of the NPs on the NF that allowed overcoming the electrical conductivity limitations of oxide NPs. We were able to produce CoFe2O4-coated NFs having 10 cm2 geometric surface areas with overpotentials below 300 mV for the OER at a current density of 50 mA/cm2. Such impressively low overpotentials suggested using CoFe2O4 NP-based electrodes within a water electrolysis device. In this prototype device, stable operating currents up to 500 mA at remarkably low cell-voltages of 1.62 and 1.53 V, at ambient and 50 °C electrolyte temperatures, respectively, were reached during operation periods of up to 50 h. The high electrochemical energy efficiencies reached at 50 mA/cm2, 75% and 81% respectively, rendered these devices particularly appealing to be combined with low-cost photovoltaic systems for bias-free hydrogen production. Therefore, CoFe2O4 NP-based electrolysers were coupled to low-cost thin-film silicon solar cells with 13% efficiency to complete a system that afforded solar-to-fuel efficiencies above 10%., Authors acknowledge funding from Generalitat de Catalunya through the CERCA program, 2017 SGR 1246, 2017 SGR 327 and the Spanish MINECO projects MAT2014-59961, ENE2016-80788-C5-5-R, ENE2016-77798-C4-3-R and ENE2017-85087, together with the support from Repsol S. A. Likewise, the authors thank Enagás S.A. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant No. SEV-2017-0706). IREC also acknowledges additional support from the European Regional Development Funds (ERDF, FEDER), (S)TEM part of the present work has been performed in the framework of Universitat Autònoma de Barcelona Materials Science PhD program and the rest in the Nanoscience program of the University of Barcelona. The authors thank S. Moll (IEK-5), M. Biset-Peiró (IREC), and H. Xie (IREC) for their contribution to this work. F.U. acknowledges financial support from MINECO through Juan de la Cierva fellowship (FJCI-2016-29147).V.S. and F.F. (authors from IEK-5) thank the Deutsche Forschungsgemeinschaft (DFG) (Priority Program SPP 1613). J. Llorca is a Serra Húnter Fellow and is grateful to ICREA Academia program and funding from Generalitat de Catalunya 2017 SGR 128., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring the mid-infrared SEDs of Six AGN dusty torus models. II. The Data

  • González-Martín, Omaira
  • Masegosa, Josefa
  • García-Bernete, Ismael
  • Ramos-Almeida, Cristina
  • Rodríguez-Espinosa, J. M.
  • Márquez, Isabel
  • Esparza-Arredondo, Donaji
  • Osorio-Clavijo, Natalia
  • Martínez-Paredes, Mariela
  • Victoria-Ceballos, César
  • Pasetto, Alice
  • Dultzin, Deborah
This is the second in a series of papers devoted to exploring a set of six dusty models of active galactic nuclei (AGN) with available spectral energy distributions. These models are the smooth torus by Fritz et al., the clumpy torus by Nenkova et al., the clumpy torus by Hönig & Kishimoto, the two-phase torus by Siebenmorgen et al., the two-phase torus by Stalevski et al., and the wind model by Hönig & Kishimoto. The first paper explores discrimination among models and the parameter restriction using synthetic spectra. Here we perform spectral fitting of a sample of 110 AGN drawn from the Swift/BAT survey with Spitzer/IRS spectroscopic data. The aim is to explore which is the model that describes better the data and the resulting parameters. The clumpy wind-disk model by Hönig & Kishimoto provides good fits for ∼50% of the sample, and the clumpy torus model by Nenkova et al. is good at describing ∼30% of the objects. The wind-disk model by Hönig & Kishimoto is better for reproducing the mid-infrared spectra of type 1 Seyferts (with 60% of the type 1 Seyferts well reproduced by this model compared to the 10% well represented by the clumpy torus model by Nenkova et al.), while type 2 Seyferts are equally fitted by both models (roughly 40% of the type 2 Seyferts). Large residuals are found irrespective of the model used, indicating that the AGN dust continuum emission is more complex than predicted by the models or that the parameter space is not well sampled. We found that all the resulting parameters for our AGN sample are roughly constrained to 10%-20% of the parameter space. Contrary to what is generally assumed, the derived outer radius of the torus is smaller (reaching up to a factor of ∼5 smaller for 10 pc tori) for the smooth torus by Fritz et al. and the two-phase torus by Stalevski et al. than the one derived from the clumpy torus by Nenkova et al. Covering factors and line-of-sight viewing angles strongly depend on the model used. The total dust mass is the most robust derived quantity, giving equivalent results for four of these models.© 2019 The American Astronomical Society. All rights reserved., This research is mainly funded by the UNAM PAPIIT project IA103118 (PI OG-M). M.M.-P. acknowledges support by KASI postdoctoral fellowships. I.M. and J.M. acknowledge financial support from the research project AYA2016-76682-C3-1-P (AEI/FEDER, UE). J.M.R.-E. acknowledges support from the Spanish Ministry of Science under grants AYA2015-70498-C2-1 and AYA2017-84061-P. I.G.-B. acknowledges financial support from the Spanish Ministry of Science and Innovation (MICINN) through projects PN AYA2015-64346-C2-1-P and AYA2016-76682-C3-2-P. I.M. and J.M. acknowledge financial support from the State Agency for Research of the Spanish MCIU through the >Center of Excellence Severo Ochoa> award for the Instituto de Astrofisica de Andalucia (SEV-2017-0709). D.E.-A. acknowledges support from a CONACYT scholarship. D.-D. acknowledges PAPIIT UNAM support from grant IN113719.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring the mid-infrared SEDs of Six AGN dusty torus models. I. Synthetic spectra

  • González-Martín, Omaira
  • Masegosa, Josefa
  • García-Bernete, Ismael
  • Ramos-Almeida, Cristina
  • Rodríguez-Espinosa, J. M.
  • Márquez, Isabel
  • Esparza-Arredondo, Donaji
  • Osorio-Clavijo, Natalia
  • Martínez-Paredes, Mariela
  • Victoria-Ceballos, César
  • Pasetto, Alice
  • Dultzin, Deborah
At distances from the active galaxy nucleus where the ambient temperature falls below ∼1500-1800 K, dust is able to survive. It is thus possible to have a large dusty structure present that surrounds the active galaxy nucleus. This is the first of two papers aiming at comparing six dusty torus models with available spectral energy distributions, namely, Fritz et al., Nenkova et al., Hönig & Kishimoto, Siebenmorgen et al., Stalevski et al., and Hönig & Kishimoto. In this first paper we use synthetic spectra to explore the discrimination between these models and under which circumstances they allow us to restrict the torus parameters, while our second paper analyzes the best model to describe the mid-infrared spectroscopic data. We have produced synthetic spectra from current instruments GTC/CanariCam and Spitzer/IRS and future James Webb Space Telescope (JWST)/MIRI and JWST/NIRSpec instruments. We find that for a reasonable brightness (F > 100 mJy) we can actually distinguish among models except for the two pairs of parent models. We show that these models can be distinguished based on the continuum slopes and the strength of the silicate features. Moreover, their parameters can be constrained within 15% of error, irrespective of the instrument used, for all the models except Hönig & Kishimoto. However, the parameter estimates are ruined when more than 50% of circumnuclear contributors are included. Therefore, future high spatial resolution spectra such as those expected from JWST will provide enough coverage and spatial resolution to tackle this topic.© 2019 The American Astronomical Society. All rights reserved., This research is mainly funded by the UNAM PAPIIT project IA103118 (PI OG-M). M.M.-P. acknowledges support by KASI postdoctoral fellowships. I.M. and J.M. acknowledge financial support from the research project AYA2016-76682-C3-1-P (AEI/FEDER, UE). J.M.R.-E. acknowledges support from the Spanish Ministry of Science under grants AYA2015-70498-C2-1 and AYA2017-84061-P. I.G.-B. acknowledges financial support from the Spanish Ministry of Science and Innovation (MICINN) through projects PN AYA2015-64346-C2-1-P and AYA2016-76682-C3-2-P. I.M. and J.M. acknowledge financial support from the State Agency for Research of the Spanish MCIU through the >Center of Excellence Severo Ochoa> award for the Instituto de Astrofisica de Andalucia (SEV-2017-0709). D.E.-A. acknowledges support from a CONACYT scholarship. D.-D. acknowledges PAPIIT UNAM support from grant IN113719.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessment of the diversity and abundance of the total and active fungal population and its correlation with humification during two-phase olive mill waste (‘‘alperujo”) composting

  • Tortosa Muñoz, Germán
  • Torralbo, F.
  • Maza-Márquez, Paula
  • Aranda, Elisabet
  • Calvo, Carlos
  • González-Murua, Carmen
  • Bedmar, Eulogio J.
Metagenomic and transcriptomic techniques applied to composting could increase our understanding of the overall microbial ecology and could help us to optimise operational conditions which are directly related with economic interest. In this study, the fungal diversity and abundance of two-phase olive mill waste (“alperujo”) composting was studied using Illumina MiSeq sequencing and quantitative PCR, respectively. The results showed an increase of the fungal diversity during the process, with Ascomycota being the predominant phylum. Penicillium was the main genera identified at the mesophilic and maturation phases, with Debaryomyces and Sarocladium at the thermophilic phase, respectively. The fungal abundance was increased during composting, which confirms their important role during thermophilic and maturation phases. Some Basidiomycota showed an increased during the process, which showed a positive correlation with the humification parameters. According to that, the genus Cystofilobasidium could be used as a potential fungal biomarker to assess alperujo compost maturation., This work was supported by the ERDF-co-financed projects from Junta de Andalucía (Spain) [P12-AGR-1968], the Spanish MINECO [AGL2015-64582-CO3-02] and MINECO-CSIC RECUPERA 2020 [20134R070]. G. Tortosa thanks the farmer J. González Almendros for his financial and technical assistance during AL composting and also, A. J. Fernández-González, A. Vicente-Lasa, M. Fernández-López and P. J. Villadas for their helpful discussions. Support by Basque Country Government [IT-583 932-16] and the Spanish Red Sirena [AGL2015-68881-REDT] are also acknowledged. E. Aranda thanks MINECO-ERDF for supporting her Ramón y Cajal project [RYC-2013-12481] and [CTM2017-84332-R].
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Growth rate effects on the thermoelectric performance of CaMnO3-based ceramics

  • Ferreira, Nuno M.
  • Neves, N. R.
  • Ferro, M. C.
  • Torres, M. A.
  • Madre, M. A.
  • Costa, F. M.
  • Sotelo, Andres
  • Kovalevsky, A. V.
CaMnO3–based materials represent a promising family of n-type oxide thermoelectrics. The objective of the present work is assessing the impacts on relevant structural, microstructural and thermoelectric properties of manganites when they are processed by the laser floating zone technique. For this purpose, donor-doped Ca0.9La0.1MnO3, CaMn0.95Nb0.05O3 and undoped CaMnO3 were used. Different growth conditions have been evaluated through combined studies of structural, microstructural, and thermoelectric characteristics. Despite the presence of secondary phases, electrical resistivity is among the best reported in the literature (9 mΩ.cm at 800 °C for La-doped materials grown at 200 mm/h). Essentially high absolute Seebeck coefficient of 320 μV/K at 800 °C was observed for undoped samples grown at 10 mm/h. Power factor is significantly affected by the growth conditions, reaching the highest values when using the lowest pulling rates. Exceptionally high PF (0.39 mW/K2m at 800 °C) was obtained for undoped CaMnO3 samples grown at 10 mm/h., The authors are grateful to i3N (FCT UID/CTM/50025/2019), CICECO-Aveiro Institute of Materials (FCT UID/CTM/50011/2019) and project POCI-01-0145-FEDER-031875, financed by COMPETE 2020 Program and national funds through the FCT/MEC and FEDER under the PT2020 Partnership Agreement. NMF thanks FCT for the grant SFRH/BPD/111460/2015. AK acknowledges the support of the project of bilateral cooperation between FCT and DAAD (Germany). M. A. Madre, M. A. Torres, and A. Sotelo acknowledge Gobierno de Aragón-FEDER (Research Group T 54-17R), and MINECO-FEDER (Project MAT2017-82183-C3-1-R) for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Prevalence of non-aromatic carbonaceous molecules in the inner regions of circumstellar envelopes

  • Martínez Orellana, Lidia
  • Santoro, Gonzalo
  • Merino, Pablo
  • Accolla, Mario
  • Lauwaet, Koen
  • Sobrado, Jesús Manuel
  • Sabbah, Hassan
  • Peláez, Ramón J.
  • Herrero, Víctor J.
  • Tanarro, Isabel
  • Agúndez, Marcelino
  • Martín-Jiménez, Alberto
  • Otero, Roberto
  • Ellis, Gary James
  • Joblin, C.
  • Cernicharo, José
  • Martín-Gago, José A.
9 pags., 6 figs., Evolved stars are foundries of chemical complexity, gas and dust that provide the building blocks of planets and life, and dust nucleation first occurs in their photosphere. The circumstellar regions enveloping these stars, despite their importance, remain hidden to many observations, and dust formation processes are therefore still poorly understood. Laboratory astrophysics provides complementary routes to unveil these chemical processes, but most experiments rely on combustion or plasma decomposition of molecular precursors under physical conditions far removed from those in space. To reproduce and characterize the bottom-up dust formation process, we have built an ultra-high vacuum machine combining atomic gas aggregation with advanced in situ characterization techniques. We show that carbonaceous dust analogues that formed from low-pressure gas-phase condensation of carbon atoms in a hydrogen atmosphere, in a ratio of carbon to molecular hydrogen similar to that reported for evolved stars, lead to the formation of amorphous carbon nanograins and aliphatic carbon clusters. Aromatic species and fullerenes do not form effectively under these conditions, raising implications for a revision of the chemical mechanisms taking place in circumstellar envelopes., We thank the European Research Council for funding support under Synergy Grant ERC-2013-SyG, G.A. 610256 (NANOCOSMOS). We also acknowledge partial support from the Spanish Research Agency (AEI) through grants MAT2017-85089-c2-1R, FIS2016-77578-R and FIS2016-77726-C3-1-P. Support from the FotoArt-CM Project (P2018/NMT-4367) through the Program of R&D activities between research groups in Technologies 2013, cofinanced by European Structural Funds, is also recognized., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Major imprint of surface plankton on deep ocean prokaryotic structure and activity

  • Ruiz-González, Clara
  • Mestre, Mireia
  • Estrada, Marta
  • Sebastián, Marta
  • Salazar, Guillem
  • Agustí, Susana
  • Moreno-Ostos, Enrique
  • Reche, Isabel
  • Álvarez-Salgado, Xosé Antón
  • Morán, Xosé Anxelu G.
  • Duarte, Carlos M.
  • Sala, M. Montserrat
  • Gasol, Josep M.
pages, 7 figures, 1 table, supporting information.-- https://doi.org/10.1111/mec.15454.-- DNA sequences and associated metadata: European Nucleotide Database (ENA) under accession numbers ERP109198 and ERS2539749–ERS2539903. The environmental metadata, and the complete non-rarefied OTU and taxonomic tables used in this study are provided as Supporting Information (Tables S1, S2, S3 and S4).-- This is a contribution of Grup Consolidat de Recerca of the Catalan Government 2014SGR/1179, Deep ocean microbial communities rely on the organic carbon produced in the sunlit ocean, yet it remains unknown whether surface processes determine the assembly and function of bathypelagic prokaryotes to a larger extent than deep‐sea physico‐chemical conditions. Here, we explored whether variations in surface phytoplankton assemblages across Atlantic, Pacific and Indian ocean stations can explain structural changes in bathypelagic (ca. 4000 m) free‐living and particle‐attached prokaryotic communities (characterized through 16S rRNA gene sequencing), as well as in prokaryotic activity and dissolved organic matter (DOM) quality. We show that the spatial structuring of prokaryotic communities in the bathypelagic strongly followed variations in the abundances of surface dinoflagellates and ciliates, as well as gradients in surface primary productivity, but were less influenced by bathypelagic physico‐chemical conditions. Amino acid‐like DOM components in the bathypelagic reflected variations of those components in surface waters, and seemed to control bathypelagic prokaryotic activity. The imprint of surface conditions was more evident in bathypelagic than in shallower mesopelagic (200‐1000 m) communities, suggesting a direct connectivity through fast‐sinking particles that escapes mesopelagic transformations. Finally, we identified a pool of endemic deep‐sea prokaryotic taxa (including potential chemoautotrophic groups) that appear less connected to surface processes than those bathypelagic taxa with a widespread vertical distribution. Our results suggest that surface planktonic communities shape the spatial structure of the bathypelagic microbiome to a larger extent than the local physico‐chemical environment, likely through determining the nature of the sinking particles and the associated prokaryotes reaching bathypelagic waters, This work was funded by the Spanish Ministry of Economy and Competitiveness (MINECO) through the Consolider-Ingenio program (Malaspina 2010 Expedition, ref. CSD2008-00077), with contributions from grant CTM2015-70340R, CTM2015-65720-R, CTM2015-69936-P, RTI2018-101025-B-I00, Modeling Nature Scientific Unit (UCE.PP2017.03), CTM2015-69392-C3-2-R (co-financed with FEDER funds) and King Abdullah University of Science and Technology (KAUST). [...] CRG was supported by a Juan de la Cierva fellowship and the GRAMMI project (IJCI-2015-23505 and RTI2018717 099740-J-I00, MICINN, Spain). MSE was supported by a Viera y Clavijo contract funded by the ACIISI and the ULPGC. MM was supported by CONICYT (FONDAP IDEAL15150003 and FONDECYT-POSTDOCTORADO 3190369)., With the funding support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), of the Spanish Research Agency (AEI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Alkane-, alkene-, alkyne-γ-lactones and ryanodane diterpenes from aeroponically grown Persea indica roots

  • Fraga, Braulio M.
  • Díaz, Carmen E.
  • Bolaños González, Patricia
  • Bailén, María
  • Andrés, María Fé
  • González-Coloma, Azucena
This work presents the study of the roots of the Macaronesian paleoendemism Persea indica (L.) Spreng. The root biomass of this protected tree species has been produced by soil-less aeroponic culture under controlled environment. This system has important advantages over traditional plant production techniques because it provides opportunities to optimize the yield of metabolite production under well-controlled conditions, thereby facilitating commercial-scale production of bioactive compounds. Thus, for the first time a study of this type has permitted the isolation from the roots of seven undescribed dextrorotatory lactones: the alkane-γ-lactones (+)-majoranolide and (+)-dihydromajorenolide, the alkene-γ-lactones (+)-majorenolide and (+)-majorenolide acetate, and the alkyne-γ-lactones, (+)-majorynolide, (+)-majorynolide acetate and (+)-isomajorynolide. In addition, thirteen known compounds were also isolated including two possible avocadofurane precursors, avocadynone acetate and avocadenone acetate, the monoterpene esters cis- and trans-p-coumarate of (−)-borneol, and the ryanoid diterpenes cinnzeylanone, anhidrocinnzeylanine, cinnzeylanine, cinnzeylanol, epiryanodol, perseanol, cinncassiol E, perseaindicol and secoperseanol. The configuration at C-14 de two ryanodane diterpenes has also been revised in this work. Furthermore, (−)-borneol cis-p-coumarate has showed to be insecticidal to S. littoralis and cytotoxic to insect (Sf9) cells, (+)-majorenolide antifeedant to aphids and cytotoxic to Sf9, cinnceylanol antifeedant and insecticidal to S. littoralis, and (+)-majorynolide (2), insecticidal against S. littoralis, cytotoxic to Sf9 and nematicidal, suggesting a defensive role for these compounds., This work has been supported by grant CTQ 2015-64049-C3-1 R, MINECO/FEDER, Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sedimentary evolution of the Le Danois contourite drift systems (southern Bay of Biscay, NE Atlantic): A reconstruction of the Atlantic Mediterranean Water circulation since the Pliocene

  • Liu, Shan
  • Hernández-Molina, Francisco J.
  • Ercilla, Gemma
  • Van Rooij, David
19 pages, 11 figures, 1 table, The evolution of the Le Danois contourite depositional systems (CDS) during the Pliocene and Quaternary was investigated based on high-resolution seismic reflection data. From old to young, six seismic units (U1–U6) bounded by major discontinuities (H1–H6) were identified. Regarding variations of the bottom-current circulation, four evolution stages of the Le Danois CDS were identified, including onset (~5.3 to 3.5–3.0 Ma), initial (3.5–3.0 to 2.5–2.1 Ma), intermediate (2.5–2.1 to 0.9–0.7 Ma) and drift-growth (0.9–0.7 Ma to present day) stages. The CDS associated with the Atlantic Mediterranean Water (AMW) along the middle continental slope initiated at ~3.5–3 Ma and was widely built after the Mid-Pleistocene Transition (MPT; 0.9–07 Ma). At a shallower water depth, a second CDS associated with the Eastern North Atlantic Central Water (ENACW) started to develop from the late Quaternary (~0.47 Ma) onwards. In the AMW-related drift system, the Le Danois Drift was generated both under glacial and interglacial climatic oscilations. Repeated internal structures in unit 5 that consist of acoustically transparent lower parts, moderate amplitude upper parts and high amplitude erosional surfaces at the top, are compared with interglacial/glacial cycles since the middle Pleistocene to the present day. These cyclic features suggest coarsening-upward sequences of the Le Danois Drift and processes related to enhanced AMW during glacial stages. The estimated sedimentation rate of the Le Danois CDS reached a maximum during the MPT (at least ~27 cm/ky) and then decreased until present-day (~5 cm/ky). Variations of sedimentary stacking patterns and processes of the Le Danois CDS imply full domination of the intermediate water mass along the central Atlantic and southwest European continental slopes from the late Pliocene (~3.5–3.0 Ma) onwards, This study was carried out within the framework of a Chinese Scholarship Council “CSC Grant” (201506410062). This study built on achievements of project ESF Euromargins MOUNDFORCE, EC FP5 RTN EURODOM and EC FP6 HERMES 626 (GOCE-CT-2005-511234-1). The research cruises namely framed within the ECOMARG (REN2002-624 00916/MAR) and MARCONI (REN2001-1734 C03-01/M) projects. Shiptime RV Belgica was provided by BELSPO and RBINS–OD Nature. This study was conducted in collaboration with “The Drifters” Research Group of the Royal Holloway University of London (UK) and it is related to the projects CTM 2012-39599-C03, CGL2016-80445-R, and CTM2016-75129-C3-1-R (REN2001-1734 C03-01/M). It was also carried out in collaboration with the Continental Margins Group-GMC from ICM-CSIC (Spain) and its related Spanish projects (CTM2008-06399-C04-04/MAR; CTM2012-39599-CO3-O3; CMT2015- 65461-C2-R (MINEICO/FEDER), With the funding support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), of the Spanish Research Agency (AEI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Validación de una estrategia para la estimación del riesgo en intersecciones con vehículos conectados

  • Villagrá, Jorge
  • Perarnau, Manuel
  • Godoy, Jorge
  • Artuñedo, Antonio
Para hacer posible el despliegue masivo de vehículos automatizados en entornos urbanos es capital avanzar en la toma de decisiones seguras. En particular, es necesario mejorar la capacidad de inferir las intenciones de los diferentes agentes y el riesgo que implican en las escenas complejas de conducción, mejorando así la seguridad y predictibilidad de los sistemas de ayuda a la conducción y de conducción automatizada. El presente trabajo muestra la implementación y validación en simulación de una solución novedosa para estimar el riesgo de conducción utilizando un modelo de espacio y estados en el contexto de las intersecciones. La estrategia utilizada modela la escena de conducción como una red dinámica Bayesiana e infiere intenciones y expectativas de los agentes involucrados a través de un filtro de partículas. Los resultados son muy prometedores tanto en tasa de acierto como en horizonte de predicción en los entornos para los que ha sido probado: intersecciones en Y, en T y en X., To make possible the massive deployment of automated vehicles in urban environments, it is essential to move forward in making safe decisions. In particular, it is necessary to improve the ability to infer the intentions of the different agents and the risk involved in complex driving scenes, thus improving the safety and predictability of automated driving and driving assistance systems. The present work shows the implementation and validation in simulation of a novel solution to estimate the risk of driving using a model of space and states in the context of intersections. The strategy used models the driving scene as a dynamic Bayesian network and infers intentions and expectations of the agents involved through a particle filter. The results are very promising in both the success rate and the prediction horizon in the environments for which it has been tested: Y, T and X intersections., Los autores quieren agradecer la ayuda financiera recibida del proyecto COGDRIVE (DPI2017- 86915-C3-1-R), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A decision-making architecture for automated driving without detailed prior maps

  • Artuñedo, Antonio
  • Godoy, Jorge
  • Villagrá, Jorge
Autonomous driving requires general methods to generalize unpredictable situations and reason in complex scenarios where safety is critical and the vehicle must react in a reliable manner. In this sense, digital maps are a crucial component for relating the location of the vehicle and identifying the different road features. In this work, we present a decision-making architecture which does not require detailed prior maps. Instead, OSM is used to plan a global route and an automatically generate driving corridors, which are adapted using a proposed vision-based algorithm. Moreover, a grid-based approach is also applied to consider the localization uncertainty. Those self-generated driving corridors are used by the local planner to plan the trajectories the vehicle will follow. Our approach integrates global, local and HMI components to provide the required functionalities for autonomous driving in a general manner., This work has been partially funded by the Spanish Ministry of Science, Innovation and Universities with National Project COGDRIVE (DPI2017- 86915-C3-1-R), and by the European Commission through the Project PRYSTINE (ECSEL-783190-2)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Machine learning based motion planning approach for intelligent vehicles

  • Artuñedo, Antonio
  • Corrales, Gabriel
  • Villagrá, Jorge
  • Godoy, Jorge
The complexity to handle complex situations in automated driving requires increasing computational resources. In this work, we propose a machine learning approach for motion planning aiming at optimizing the set of path candidates to be evaluated in accordance with the driving context. Thus, the computation cost of the whole motion planning strategy can be reduced while generating safe and comfortable trajectories when required. The proposed strategy has been implemented in a real experimental platform and validated in different operating environments, successfully providing high quality trajectories in a small time frame., This work has been partially funded by the Spanish Ministry of Science, Innovation and Universities with National Project COGDRIVE (DPI2017- 86915-C3-1-R), the Community of Madrid through SEGVAUTO 4.0-CM (S2018-EMT-4362) Programme, and by the European Commission through the Project PRYSTINE (ECSEL-783190-2)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Motion Planning Approach Considering Localization Uncertainty

  • Artuñedo, Antonio
  • Villagrá, Jorge
  • Godoy, Jorge
  • Castillo-Sobrino, M. Dolores del
Localization plays an important role in autonomous driving since a high level of accuracy in vehicle localization is indispensable for a safe navigation. Most of the motion planning approaches in the literature assume negligible uncertainty in vehicle localization. However, the accuracy of localization systems can be low by design or even can drop depending on the environment in some cases. In these situations, the localization uncertainty can be taken into consideration in motion planning to increase the system reliability. Accordingly, this work presents two main contributions: (i) a probabilistic occupancy grid-based approach for localization uncertainty propagation, and (ii) a motion planning strategy that relies on such occupancy grid. Thus, the proposed motion planning solution for automated driving is able to generate safe human-like trajectories in real time while considering the localization uncertainty, ego-vehicle constrains and obstacles. In order to validate the proposed algorithms, several experiments have been conducted in a real environment., This work has been partially funded by the Spanish Ministry of Science, Innovation and Universities with National Project COGDRIVE (DPI2017-86915-C3-1-R), the Community of Madrid through SEGVAUTO 4.0-CM (S2018-EMT4362) Programme, and by the European Commission through the Projects PRYSTINE (ECSEL-783190-2) and SECREDAS (ECSEL-783119-2)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Framework for motion prediction of vehicles in a simulation environment

  • Medina-Lee, Juan Felipe
  • Trentin, Vinicius
  • Villagrá, Jorge
Efficient testing and validation of software components for highly automate vehicles is one of the key challenges to be solved for their massive deployment. The number of driving situation and environment variables makes validation almost intractable with real vehicles in open roads, and the testing reproducibility can only be achieved via simulation. This manuscript presents a framework and preliminary results for motion prediction of vehicles in a simulation environment that is being currently developed by the AUTOPIA Program., This work has been partially funded by the Spanish Ministry of Science, Innovation and Universities with National Project COGDRIVE (DPI2017-86915-C3-1-R), the Community of Madrid through SEGVAUTO 4.0-CM (S2018- EMT-4362) Programme, and by the EuropeanCommission through the Projects PRYSTINE (ECSEL-783190-2) and SECREDAS (ECSEL783119-2)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reachability Estimation in Dynamic Driving Scenes for Autonomous Vehicles

  • Medina-Lee, Juan Felipe
  • Artuñedo, Antonio
  • Godoy, Jorge
  • Villagrá, Jorge
Autonomous vehicles will find an infinite number of possible scenarios while driving in urban environments and need to react in a proper manner. For that reason, it is important to have algorithms that can propose driving alternatives for different type of scenarios in a global and unified way instead of using rule-based algorithms which depend on the driving scene. This paper presents a reachability estimation algorithm designed to obtain a safe and comfort-optimized trajectory set for different driving scenarios. First, a finite number of path candidates are created using Bezier curves. Then, all valid path ´ candidates are combined with the reachable sets of dynamic obstacles to generate speed profiles consistent with safety and comfort requirements. The output of this algorithm would allow a decision-making strategy to select the optimum candidate depending on different criteria., This work has been partially funded by the Spanish Ministry of Science, Innovation and Universities with National Project COGDRIVE (DPI2017- 86915-C3-1-R), the Community of Madrid through SEGVAUTO 4.0-CM (S2018-EMT-4362) Programme, and by the European Commission through the Projects PRYSTINE (ECSEL-783190-2) and SECREDAS (ECSEL783119-2)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Interaction-aware risk assessment: focus on the lateral intention

  • Villagrá, Jorge
  • Artuñedo, Antonio
  • Trentin, Vinicius
  • Godoy, Jorge
To make the massive deployment of automated vehicles possible in complex urban environments, it is essential to provide them with the ability of making safe and useful decisions.To tha tend,it is necessary to improve their capability to infer the intentions of the surrounding vehicles and their associated collision risk for the ego-vehicle in complex driving scenes. This work shows the implementation and validation in simulation of a probabilistic approach to estimate the risk of driving under uncertain conditions, combining (i) intention estimations and (ii) the expected behaviour of vehicles according to the topology and the subsequent traffic rules of the considered driving scenario. Promising results in terms of success rate and prediction horizon have been obtained testing the proposed approach in driving situations where lateral intention estimation is relevant, namely in multi-lane roundabouts and highways., This work has been partially funded by the Spanish Ministry of Science, Innovation and Universities with National Project COGDRIVE (DPI2017-86915-C3-1-R), the Community of Madrid through SEGVAUTO 4.0-CM (S2018EMT-4362) Programme, and by the European Commission through the Projects NEWCONTROL (ECSEL-826653-2) and SECREDAS (ECSEL-783119-2)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In the name of a distant king: representing royal authority in the county of Castile, c.900–1038

  • Escalona, Julio
This article explores the representation of royal power in the tenth‐century county of Castile by contrasting the low degrees of effective royal agency within the county with a dominant charter‐writing tradition that coupled king and count in the synchronisms of the dating clauses. The components of the Castilian charter corpus are broken down and compared to other areas in northern Iberia, in order to suggest that, rather than a mere regional charter‐writing tradition, this practice reflects a widespread political culture that sought to legitimize the counts' unitary leadership of Castile by reference to a prestigious yet distant royal figure., This article was developed with support from the research projects HAR2010-21950-C03-01 (Plan Nacional de I+D+i) and HAR2013-47889-C3-2-P (Programa Estatal de Investigación Científica y Técnica de Excelencia), funded by the Spanish government, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Distribution of dissolved organic matter in estuaries of the southern Iberian Atlantic Basin: Sources, behavior and export to the coastal zone

  • Amaral, Valentina
  • Romera-Castillo, Cristina
  • García-Delgado, M.
  • Gómez-Parra, Abelardo
  • Forja, Jesús M.
15 pages, 8 figures, 4 tables, supplementary data https://doi.org/10.1016/j.marchem.2020.103857, The Gulf of Cádiz, located in the Southern Iberian Atlantic Basin, connects the North Atlantic Ocean and the Mediterranean Sea and receives freshwater input from three main estuaries: Guadalquivir, Guadiana, and Tinto-Odiel. These estuaries differ in their hydrology, basin characteristic, and land use. One of them, Tinto-Odiel, is one of the most polluted estuaries in the world. However, little is known about the export of DOM from these estuaries to the Gulf of Cádiz. In this work, the estuaries were sampled during the dry season. Dissolved organic matter (DOM) was chemically characterized along a longitudinal gradient to better understand the reactivity and fate of carbon exported to the Gulf of Cádiz. We also performed a tidal study at the mouth of each estuary to understand how the tide affects the composition of DOM and its export to the coastal zone. Fluorescent DOM (FDOM) modeling employing multivariate parallel factor analysis and pyrolysis-gas chromatography-mass spectroscopy analysis (Py-GC–MS) were used to characterize DOM. DOM from Guadalquivir and Guadiana estuaries presented a predominant allochthonous origin with humic-like compounds making up to ~80% of the total fluorescent DOM. These estuaries receive lateral inputs from surrounding watersheds and agricultural practices. Instead, in Tinto-Odiel estuary, DOM was predominantly autochthonous with a higher content of protein-like material associated with the prevalence of the marine influence over the low water discharges and anthropogenic pollution from industrial activities. Tidal cycles affected the distribution of DOM and its quality with higher humic-like material during low tide and protein-like substances predominating during high tide. During the dry season, the three estuaries represented a source of DOM to the Gulf of Cádiz. Guadalquivir was the main contributor with 1.25 Kg C s and 0.22 × 10 m s, for DOC and CDOM, respectively. Around 70% of the FDOM exported from the three estuaries was of humic nature. The results obtained in this work highlight the importance of local conditions, such as the basin characteristic and estuarine biogeochemical reactivity in the composition of the DOM exported to the coastal ocean. Moreover, Py-GC–MS analysis was a useful technique, complementary to fluorescence spectroscopy, which improves DOM characterization in estuarine systems, Valentina Amaral was financed by the National Research and Innovation Agency of Uruguay (ANII) with a Ph.D. fellowship (POS_EXT_2015_1_122780). Cristina Romera-Castillo was funded by a Juan de la Cierva-Incorporación Postdoctoral Fellowship from the Spanish “Ministerio de Economía y Competitividad”. [...] This study was financed by the Spanish CICYT (Spanish Program for Science and Technology) under contracts CTM2014-59244-C3-1-R and RTI2018-100865-B-C21
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Physiological processes modulate acute and chronic responses to dietary protein/energy ratio fluctuations in individuals and families of Manila clam (Ruditapes philippinarum) selected for variable growth rates

  • Arranz, Kristina
  • Urrutxurtu, Iñaki
  • Urrutia, Miren Bego
  • Saavedra, Carlos Felipe
  • Cordero, David
  • Pérez-Larruscaín, J.
  • Navarro, Enrique
A range of phenotypes differing in growth rate were designed in the Manila clam by combining separate breeding families with size segregation within each family to constitute fast and slow growing groups. Physiological components of the energy budget and scope for growth (SFG) were then compared between these different phenotypes during the acute and chronic responses to two diets that were isocaloric but differed by 3-fold in their protein/energy (P/E) ratios. Both diets were based on the microalgae Rhodomonas lens obtained in either the exponential or the stationary phase of culture. The aims of the study were 1) to test the effects of these changes in food composition on growth rate, estimated as the balance of physiological processes of energy gain and loss integrated in the SFG; and 2) to assess the extent to which physiological adjustments to diet composition are modulated in order to fulfill the variable energy requirements posed by the occurrence of differential growth phenotypes. Growth performance improved with the high-protein (N+) diet for the different family * growth group combinations, with SFG values exceeding by 50% on average the values of the low-protein (N-) diet. Digestive constraints resulted in reduced absorption efficiency with the N-diet, which tended to cancel out the potential benefits of adjusting feeding rates in order to compensate for a low protein ration. Endogenous differences in growth rate associated with segregated phenotypes were mainly accounted for by differences in energy acquisition, with feeding rates differing by ~ 2-fold between fast and slow growers. Additionally, significant differences were recorded for the unitary metabolic costs (i.e., per unit of metabolizable energy), indicating that higher metabolic efficiency was also a component of faster growth., This work was supported by the Spanish Ministry of Economy and Competitiveness (AGL2013-49144-C3-1-R). K. Arranz was funded by a predoctoral research grant from Universidad del País Vasco/Euskal Herriko Unibertsitatea (UPV/EHU). SGIker technical and human support (UPV/EHU, MICINN, GV/EJ, ESF) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Shape matters: relevance of carapace for brachyuran crab invaders

  • Farré, Marc
  • Lombarte, Antoni
  • Tuset, Víctor M.
  • Abelló, Pere
15 pages, 3 figures, 1 table, supplementary material https://doi.org/10.1007/s10530-020-02378-3, The increasing trend of biological invasions is one of the most concerning threats for ecosystems functioning. The identification of optimal characters determining the invasive potential of non-native species has always been a challenge in conservation studies. Morphological features can be used as a good proxy to address the invasive success in fish species, assuming that anatomical differences in comparison to native species can provide to newcomers ecological opportunities increasing their probability to become successful. Considering this, the present study constitutes the first applicative attempt of a model based on geometric morphometrics to demonstrate the importance of the carapace shape in the invasive ability in marine decapod crustaceans. The study was performed on the native brachyuran community of Alfacs Bay, in the Ebro Delta, the largest estuarine zone along the north-western Mediterranean, in which two recently established non-native crab species coexist: Dyspanopeus sayi and Callinectes sapidus. Results suggested that invaders with extreme carapace traits located peripherally in the community morphospace, such as C. sapidus, usually possess ecological advantages contributing to understand their success. Conversely, intermediate morphologies within the morphospace, such as D. sayi, imply ecological overlapping with native species reducing their community relevance. Besides, we also assessed the effect on the community morphospace of a hypothetical future invasive event from another crab species (Portunus segnis) with high probabilities to also colonize the community. Our outcomes confirm that the morphometric approach could be an alternative tool for assessing the potential ability of invasive crab species. However, further studies at different spatial and temporal scales, including additional traits and quantitative data from invasions, would be necessary to confirm the efficacy and usefulness of the methodology, The present study is included and financed within the framework of the project CLIFISH (CTM2015-66400-C3-3-R, MINECO/FEDER), funded by the Spanish Ministry of Economy and Competitiveness and by the European Regional Development Fund (ERDF), With the funding support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), of the Spanish Research Agency (AEI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Slowness vector estimation over large-aperture sparse arrays with the Continuous Wavelet Transform (CWT): application to Ocean Bottom Seismometers

  • Cabieces, Roberto
  • Krüger, Frank
  • García-Yeguas, Araceli
  • Villaseñor, Antonio
  • Buforn, Elisa
  • Pazos, Antonio
  • Olivar-Castaño, Andrés
  • Barco, Jaime
16 pages, 13 figures, 2 tables, supplementary material https://doi.org/10.1093/gji/ggaa427.-- This is a pre-copyedited, author-produced PDF of an article accepted for publication in Geophysical Journal International 223(3): 1919-1934 (2020)following peer review. The version of record [insert complete citation information here] is available online at https://doi.org/10.1093/gji/ggaa427, This work presents a new methodology designed to estimate the slowness vector in large-aperture sparse Ocean Bottom Seismometer (OBS) arrays. The Continuous Wavelet Transform (CWT) is used to convert the original incoherent traces that span a large array, into coherent impulse functions adapted to the array aperture. Subsequently, these impulse functions are beamformed in the frequency domain to estimate the slowness vector. We compare the performance of this new method with that of an alternative solution, based on the Short-/Long-Term Average algorithm and with a method based on the trace envelope, with the ability to derive a very fast detection and slowness vector estimation of seismic signal arrivals. The new array methodology has been applied to data from an OBS deployment with an aperture of 80 km and an interstation distance of about 40 km, in the vicinity of Cape Saint Vincent (SW Iberia). A set of 17 regional earthquakes with magnitudes 2 < mbLg < 5, has been selected to test the capabilities of detecting and locating regional seismic events with the Cape Saint Vincent OBS Array. We have found that there is a good agreement between the epicentral locations obtained previously by direct search methods and those calculated using the slowness vector estimations resulting from application of the CWT technique. We show that the proposed CWT method can detect seismic signals and estimate the slowness vector from regional earthquakes with high accuracy and robustness under low signal-to-noise ratio conditions. Differences in epicentral distances applying direct search methods and the CWT technique are between 1 and 21 km with an average value of 12 km. The backazimuth differences range from 1° to 7° with an average of 1.5° for the Pwave and ranging from 1° to 10° with an average of 3° for the Swave, With thanks to the Spanish Ministerio de Economía, Industria y Competitividad projects CGL2013-45724-C3-3-R and CGL2017-86097-R, With the funding support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), of the Spanish Research Agency (AEI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

EvryFlare. III. Temperature Evolution and Habitability Impacts of Dozens of Superflares Observed Simultaneously by Evryscope and TESS

  • Howard, W. S.
  • Corbett, Hank
  • Law, Nicholas M.
  • Ratzloff, J. K.
  • Galliher, Nathan
  • Glazier, Amy
  • González, R.
  • Soto, A.
  • Fors, Octavi
  • Ser, Daniel del
  • Haislip, Joshua B.
Superflares may provide the dominant source of biologically relevant UV radiation to rocky habitable-zone M-dwarf planets (M-Earths), altering planetary atmospheres and conditions for surface life. The combined line and continuum flare emission has usually been approximated by a 9000 K blackbody. If superflares are hotter, then the UV emission may be 10 times higher than predicted from the optical. However, it is unknown for how long M-dwarf superflares reach temperatures above 9000 K. Only a handful of M-dwarf superflares have been recorded with multiwavelength high-cadence observations. We double the total number of events in the literature using simultaneous Evryscope and Transiting Exoplanet Survey Satellite observations to provide the first systematic exploration of the temperature evolution of M-dwarf superflares. We also increase the number of superflaring M dwarfs with published time-resolved blackbody evolution by ∼10×. We measure temperatures at 2 minutes cadence for 42 superflares from 27 K5-M5 dwarfs. We find superflare peak temperatures (defined as the mean of temperatures corresponding to flare FWHM) increase with flare energy and impulse. We find the amount of time flares emit at temperatures above 14,000 K depends on energy. We discover that 43% of the flares emit above 14,000 K, 23% emit above 20,000 K and 5% emit above 30,000 K. The largest and hottest flare briefly reached 42,000 K. Some do not reach 14,000 K. During superflares, we estimate M-Earths orbiting <200 Myr stars typically receive a top-of-atmosphere UV-C flux of ∼120 W m-2 and up to 103 W m-2, 100-1000 times the time-averaged X-ray and UV flux from Proxima Cen., WH acknowledges partial funding support of the Proxima Cen data and analysis through the Cycle 26 HST proposal GO 15651. WH, HC, NL, JR, and AG acknowledge funding support by the National Science Foundation CAREER grant 1555175, and the Research Corporation Scialog grants 23782 and 23822. HC is supported by the National Science Foundation Graduate Research Fellowship under Grant No. DGE-1144081. OF and DdS acknowledge support by the Spanish Ministerio de Econom´ıa y Competitividad (MINECO/FEDER, UE) under grants AYA2013-47447- C3-1-P, AYA2016-76012-C3-1-P, MDM-2014-0369 of ICCUB (Unidad de Excelencia ‘Mar´ıa de Maeztu’). The Evryscope was constructed under National Science Foundation/ATI grant AST-1407589. This paper includes data collected by the TESS mission. Funding for the TESS mission is provided by the NASA Explorer Program. This work has made use of data from the European Space Agency (ESA) mission Gaia (https://www.cosmos.esa.int/gaia), processed by the Gaia Data Processing and Analysis Consortium (DPAC, https://www.cosmos.esa.int/web/gaia/ dpac/consortium). Funding for the DPAC has been provided by national institutions, in particular the institutions participating in the Gaia Multilateral Agreement. This research made use of Astropy,5 a communitydeveloped core Python package for Astronomy (Astropy Collaboration et al. 2013; Price-Whelan et al. 2018), and the NumPy, SciPy, and Matplotlib Python modules (van der Walt et al. 2011; Virtanen et al. 2020; Hunter 2007). Facilities: CTIO:Evryscope, TESS
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

EvryFlare. II. Rotation Periods of the Cool Flare Stars in TESS across Half the Southern Sky

  • Howard, W. S.
  • Corbett, Hank
  • Law, Nicholas M.
  • Ratzloff, J. K.
  • Galliher, Nathan
  • Glazier, Amy
  • Fors, Octavi
  • Ser, Daniel del
  • Haislip, Joshua B.
We measure rotation periods and sinusoidal amplitudes in Evryscope light curves for 122 two-minute K5-M4 TESS targets selected for strong flaring. The Evryscope array of telescopes has observed all bright nearby stars in the south, producing 2-minute cadence light curves since 2016. Long-term, high-cadence observations of rotating flare stars probe the complex relationship between stellar rotation, starspots, and superflares. We detect periods from 0.3487 to 104 days and observe amplitudes from 0.008 to 0.216 g′ mag. We find that the Evryscope amplitudes are larger than those in TESS with the effect correlated to stellar mass (p-value = 0.01). We compute the Rossby number (R o ) and find that our sample selected for flaring has twice as many intermediate rotators (0.04 < R o < 0.4) as fast (R o < 0.04) or slow (R o > 0.44) rotators; this may be astrophysical or a result of period detection sensitivity. We discover 30 fast, 59 intermediate, and 33 slow rotators. We measure a median starspot coverage of 13% of the stellar hemisphere and constrain the minimum magnetic field strength consistent with our flare energies and spot coverage to be 500 G, with later-type stars exhibiting lower values than earlier-type stars. We observe a possible change in superflare rates at intermediate periods. However, we do not conclusively confirm the increased activity of intermediate rotators seen in previous studies. We split all rotators at R o ∼ 0.2 into bins of P Rot < 10 days and P Rot > 10 days to confirm that short-period rotators exhibit higher superflare rates, larger flare energies, and higher starspot coverage than do long-period rotators, at p-values of 3.2 × 10-5, 1.0 × 10-5, and 0.01, respectively., WH, HC, NL, JR, and AG acknowledge funding support by the National Science Foundation CAREER grant 1555175, and the Research Corporation Scialog grants 23782 and 23822. HC is supported by the National Science Foundation Graduate Research Fellowship under Grant No. DGE-1144081. OF and DdS acknowledge support by the Spanish Ministerio de Econom´ıa y Competitividad (MINECO/FEDER, UE) under grants AYA2013-47447-C3-1-P, AYA2016-76012- C3-1-P, MDM-2014-0369 of ICCUB (Unidad de Excelencia ‘Mar´ıa de Maeztu’). The Evryscope was constructed under National Science Foundation/ATI grant AST-1407589. This work has made use of data from the European Space Agency (ESA) mission Gaia (https://www.cosmos.esa.int/gaia), processed by the Gaia Data Processing and Analysis Consortium (DPAC, https://www.cosmos.esa.int/web/gaia/ dpac/consortium). Funding for the DPAC has been provided by national institutions, in particular the institutions participating in the Gaia Multilateral Agreement. This research made use of Astropy,4 a community-developed core Python package for Astronomy (Astropy Collaboration et al. 2013; Price-Whelan et al. 2018), and the NumPy, SciPy, and Matplotlib Python modules (van der Walt et al. 2011; Jones et al. 2001; Hunter 2007).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A search for dark matter in Triangulum II with the MAGIC telescopes

  • Green, J. G.
  • Saturni, F. G.
  • Palacio, J.
  • Doro, Michele
  • Gaug, Markus
  • Maggio, C.
  • Molina, E.
  • Moreno, V.
  • Munar-Adrover, P.
  • Paredes, Josep M.
  • Ribó, Marc
MAGIC Collaboration: et al., arXiv:2003.05260v1, We present the first results from very-high-energy observations of the dwarf spheroidal satellite candidate Triangulum II with the MAGIC telescopes from 62.4 hours of good-quality data taken between August 2016 and August 2017. We find no gamma-ray excess in the direction of Triangulum II, and upper limits on both the differential and integral gamma-ray flux are presented. Currently, the kinematics of Triangulum II are affected by large uncertainties leading to a bias in the determination of the properties of its dark matter halo. Using a scaling relation between the annihilation J -factor and heliocentric distance of well-known dwarf spheroidal galaxies, we estimate an annihilation J -factor for Triangulum II for WIMP dark matter of log[Jann(0.5◦)/ GeV2cm−5] = 19.35±0.37. We also derive a dark matter density profile for the object relying on results from resolved simulations of Milky Way sized dark matter halos. We obtain 95% confidence-level limits on the thermally averaged annihilation cross section for WIMP annihilation into various Standard Model channels. The most stringent limits are obtained in the τ−τ+final state, where a cross section for annihilation down to hσannvi = 3.05 × 10−24cm3s−1is excluded., The financial support of the German BMBF and MPG, Germany, the Italian INFN and INAF, Italy, the Swiss National Fund SNF, the ERDF under the Spanish MINECO (FPA2017-87859-P, FPA2017-85668-P, FPA2017-82729-C6-2-R, FPA2017-82729-C6-6-R, FPA2017-82729-C6-5-R, AYA2015-71042-P, AYA2016-76012-C3-1-P, ESP2017-87055-C2-2-P, FPA2017-90566-REDC), the Indian Department of Atomic Energy, the Japanese JSPS, Japan and MEXT, Japan, the Bulgarian Ministry of Education and Science, National RI Roadmap Project DO1-153/28.08.2018 and the Academy of Finland grant nr. 320045 is gratefully acknowledged. This work was also supported by the Spanish Centro de Excelencia “Severo Ochoa” SEV-2016-0588 and SEV-2015-0548, and Unidad de Excelencia “María de Maeztu” MDM-2014-0369, by the Croatian Science Foundation (HrZZ) Project IP-2016-06-9782 and the University of Rijeka, Croatia Project 13.12.1.3.02, by the DFG, Germany Collaborative Research Centers SFB823/C4 and SFB876/C3, the Polish National Research Centre, Polland grant UMO-2016/22/M/ST9/00382 and by the Brazilian MCTIC, CNPq, Brazil and FAPERJ, Brazil ., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional implementation of a linear glycolysis for sugar catabolism in Pseudomonas putida

  • Sánchez-Pascuala, Alberto
  • Fernández-Cabezón, Lorena
  • Lorenzo, Víctor de
  • Nikel, Pablo I.
The core metabolism for glucose assimilation of the soil bacterium and platform strain Pseudomonas putida KT2440 has been reshaped from the native, cyclically-operating Entner-Doudoroff (ED) pathway to a linear Embden-Meyerhof-Parnas (EMP) glycolysis. The genetic strategy deployed to obtain a suitable host for the synthetic EMP route involved not only eliminating enzymatic activities of the ED pathway, but also erasing peripheral reactions for glucose oxidation that divert carbon skeletons into the formation of organic acids in the periplasm. Heterologous glycolytic enzymes, recruited from Escherichia coli, were genetically knocked-in in the mutant strain to fill the metabolic gaps for the complete metabolism of glucose to pyruvate through a synthetic EMP route. A suite of genetic, physiological, and biochemical tests in the thereby-refactored P. putida strain—which grew on glucose as the sole carbon and energy source—demonstrated the functional replacement of the native sugar metabolism by a synthetic catabolism. 13C-labelling experiments indicated that the bulk of pyruvate in the resulting strain was generated through the metabolic device grafted in P. putida. Strains carrying the synthetic glycolysis were further engineered for carotenoid synthesis from glucose, indicating that the implanted EMP route enabled higher carotenoid content on biomass and yield on sugar as compared with strains running the native hexose catabolism. Taken together, our results highlight how conserved metabolic features in a platform bacterium can be rationally reshaped for enhancing physiological traits of interest., This study was supported by grants from The Novo Nordisk Foundation (grant NNF10CC1016517, and LiFe, NNF18OC0034818) and the Danish Council for Independent Research (SWEET, DFF-Research Project 8021-00039B) to P.I.N. and by the HELIOS Project of the Spanish Ministry of Science BIO 2015-66960-C3-2-R (MINECO/FEDER), the ARISYS (ERC-2012-ADG-322797), EmPowerPutida (EU-H2020-BIOTEC-2014-2015-6335536), MADONNA (H2020-FET-OPEN-RIA-2017-1-766975), BioRoboost (H2020-NMBP-BIO-CSA-2018), and SYNBIO4FLAV (H2020-NMBP/0500) Contracts of the European Union and the S2017/BMD-3691 InGEMICS-CM funded by the Comunidad de Madrid (Spain) and the European Structural and Investment Funds. L.F.C. is supported by the European Union's Horizon 2020 Research and Innovation Programme under the Marie Skłodowska-Curie grant 713683 (COFUNDfellowsDTU).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring sulphate resistance of coal mining waste blended cements through experiments and thermodynamic modelling

  • Caneda-Martínez, Laura
  • Kunther, Wolfgang
  • Medina, César
  • Sánchez de Rojas, María Isabel
  • Frías, Moisés
This study evaluates the sulphate resistance of blended cement derived from the addition of thermally activated coal waste as pozzolan, at replacement levels of 0%, 20% (CMW20) and 50% (CMW50) with a multi-method approach. The pastes were prepared at a w/b ratio of 0.5, using a water-reducing admixture in the blended pastes to compensate for their high water demand. Sulphate resistance is reduced in CMW20 pastes, while longterm benefits are observed for CMW50 pastes, although moderate signs of deterioration are observed at the beginning of the exposure. The initial damage in CMW50 pastes is attributable to the precipitation of products (mainly ettringite and monosulphoaluminate) in the small capillary pores (<0.01 ¿m). This is prevented in OPC and CMW20 pastes since their microstructure allow the precipitation in the macropores (>0.05 ¿m). The greater long-term resistance of CMW50 pastes was explained by thermodynamic calculations, which suggests that the lower calcium leachability of these cements prevented gypsum formation. This, together with the higher content of carboaluminate phases, leads to lower supersaturation levels in the pore solution with respect to ettringite, reducing stresses derived from sulphate exposure., This work was supported by the Spanish Ministry of Economy and Competitiveness and the European Regional Development Fund (MINECO/FEDER) [grant number BIA-2015-65558-C3-1,2,3-R] and as well as by the Spanish Training Program, and the European Social Fund (MINECO/FSE) [grant number BES-2016-078454]. The authors are also grateful to the Sociedad An´onima Hullera Vasco-Leonesa, SIKA (Madrid, Spain), the Spanish Cement Institute (IECA) and the Scientific Research Support Services of the University of A Coru˜na for their assistance. The sample preparation of the SEM samples by A. M. Rzepkiewicz-Hansen is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the fiber treatment and matrix modification on the durability of eucalyptus fiber reinforced composites

  • Mejia-Ballesteros, Julian Eduardo
  • Rodier, L.
  • Filomeno, R.
  • Savastano, H.
  • Frías, Moisés
  • Fiorelli, Juliano
It is well known that the most important issue of cement-based composites is the durability of the natural fibers. The present study evaluates the effect of activated coal mining residues on the physical-mechanical properties of fiber cement composites reinforced by thermally treated eucalyptus pulp, before and after accelerated aging. The results showed that the partial substitution of cement by activated coal mining residues and the use of thermally treated fibers contribute to the improvement of the mechanical properties of the composites. Indeed, an increase of the values of the modulus of rupture (MOR) and the specific energy (SE) of the composites is observed under four-point bending flexural tests. Moreover, after accelerated aging tests, both fiber treatment and matrix modification contribute to mitigate the degradation of the fibers and increase the mechanical properties of the composites. According to the results of the study, the use of activated coal mining residues as partial substitution of cement and hornification treatment of the pulp, can lead to the improvement of the mechanical performanceand durability of fiber cement composites., The authors were supported by grants offered by Susano PapelCelulose S.A., Brazil. The authors are also grateful to Coordination of Improvement of Higher Education Personnel – CAPES (Cod. 001) and the Framework Partnering Agreement between IETcc/CSIC (Spain) and FZEA/USP (Brazil) (BDC 20195707/ACAM 2019040029). This research was funded by the Spanish Ministry of Economy and Competitiveness (BIA2015-65558-C3-1-2-3R) (MINECO/FEDER)) and the National Research Council’s I–COOP Programme (ref: COOPA20089- 2015).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Adversarial Risk Analysis as a Decomposition Method for Structured Expert Judgement Modelling

  • Banks, David
  • Ríos Insua, David
  • González Ortega, Jorge
  • Rios, Jesus
The work of DRI is supported by the Spanish Ministry of Economy and Innovation programs MTM2014-56949-C3-1-R and MTM2017-86875-C3-1-R AEI/FEDER, UE, the ESF-COST Action IS1304 on Expert Judgement and the AXA-ICMAT Chair on Adversarial Risk Analysis. JGO`s research is nanced by the Spanish Ministry of Economy and Competitiveness under FPI SO grant agreement BES-2015-072892. This work has also been partially supported by the Spanish Ministry of Economy and Competitiveness, through the \Severo Ochoa" Program for Centers of Excellence in R&D (SEV-2015- 0554) and project MTM2015-72907-EXP, received funding from the European Union`s H2020 Program for Research, Technological Development and Demonstration, under grant agreement no. 740920 (CYBECO) and based upon work partially supported by the US National Science Foundation through grant DMS-163851.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An adversarial risk analysis framework for batch acceptance problems

  • González-Ortega, Jorge
  • Soyer, Refik
  • Ríos Insua, David
  • Ruggerie, Fabrizio
We provide an adversarial risk analysis framework for batch acceptance problems in which a decision maker relies exclusively on the size of the batch to accept or reject its admission to a system, albeit being aware of the presence of an opponent. The adversary acts as a data-fiddler attacker perturbing the observations perceived by the decision maker through injecting faulty items and/or modifying the existing items to faulty ones. We develop optimal policies against this combined attack strategy and illustrate the methodology with a review spam example., The work of DRI is supported by the AXA-ICMAT Chair on Adversarial Risk Analysis and the Spanish Ministry of Science program MTM2017-86875-C3-1-R AEI/FEDER, UE. FR also acknowledges the contribution of the Community of Madrid through its Chair of Excellence programme. JGO’s research has been financed by the Spanish Ministry of Economy and Competitiveness under FPI SO grant agreement BES-2015-072892. This work has also been partially supported by the Spanish Ministry of Economy and Competitiveness through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0554) and project MTM2015-72907-EXP, as well as by the US National Science Foundation through grant DMS-163851 and the BBVA Foundation project “Adversarial Machine Learning: Methods, Computations and Applications to Malware, Fake News and Autonomous Vehicles (AMALFI)”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Structured Expert Judgement Issues in a Supply Chain Cyber Risk Management System

  • Torres-Barrán, Alberto
  • Redondo, Alberto
  • Ríos Insua, David
  • Domingo, Jordi
  • Ruggeri, Fabrizio
The authors acknowledge the support by the Spanish Ministry of Economy and Innovation program MTM2017-86875-C3-1-R and RTC-2017-6593-7, the ESF-COST Action IS1304 on Expert Judgement and the AXA-ICMAT Chair on Adversarial Risk Analysis. This work has also been partially supported by the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0554), and has received funding from the European Union’s H2020 Program for Research, Technological Development and Demonstration, under grant agreement no. 740920 (CYBECO). AR work acknowledges the Spanish Ministry of Economy for his PTA position. FR acknowledges the support of the Chair of Excellence of the Comunidad de Madrid. FR and DRI acknowledge the support of the US National Science Foundation through grant DMS-163851.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Variation among species and populations in bill shape and size in three planktivorous petrels

  • Laranjeiro, Maria I.
  • Farré, Marc
  • Phillips, Richard A.
  • Quillfeldt, Petra
  • Bonadonna, Francesco
  • Gémard, Charlene
  • Daigre, Maximiliano
  • Suazo, Cristián G.
  • Barbraud, Christophe
  • Navarro, Joan
12 pages, 4 figures, 5 tables, supplementary information https://doi.org/10.1007/s00227-021-04014-7.-- Availability of data: All data are included into the manuscript supplement, Morphological variation in biological structures may be driven by genetic and environmental factors, such as inter- and intraspecific competition for resources. In seabirds, although the bill is also involved in vocalization, olfaction, sexual selection and defence, the main drivers of high morphological plasticity in bill size and shape appear to relate primarily to diet and thus to niche differentiation. Here, we combined geometric morphometrics and comparisons of linear measurements as a precise tool for measuring shape variation in anatomical features, to investigate the differences among species and populations (island groups) in bill shape of three planktivorous petrels (Antarctic prion Pachyptila desolata, blue petrel Halobaena caerulea and thin-billed prion Pachyptila belcheri). Fieldwork was carried out in South Georgia (54° 0′ S, 38° 3′ W), Falkland (51° 42′ S, 57° 51′ W), Diego Ramírez (56° 31′ S, 68° 44′ W) and Kerguelen (49° 20′ S, 69° 20′ E) Islands, from 2010 to 2021. Results show that the bills of Antarctic prions were more robust and shorter, appropriate for filtering large amounts of small prey. Blue petrels and thin-billed prions had narrower and longer bills, effective for catching and tearing large single prey. Also, Antarctic prions and blue petrels from Kerguelen had longer and narrower bills than conspecifics from other colonies, which could potentially be explained by geographic variation in diet. In conclusion, prey availability and diversity appear to be important factors influencing variation in bill morphology. This study highlights the utility of geometric morphometrics for investigating bill shape variation in seabirds. Nevertheless, further studies are needed to better understand selective pressures leading to morphological variation of biological structures, MIL was funded with an Erasmus+ internship of the European Union. MF was supported by the project CLIFISH (CTM2015-66400-C3-3-R, MINECO/FEDER) co-funded by the Ministerio de Economía y Competitividad of the Spanish government and by the European Regional Development Fund (ERDF). JN was supported by the Spanish National Program Ramón y Cajal (RYC-2015-17809). JN was funded with the Collaborative Gearing Scheme of the NERC Antarctic Funding Initiative. PQ was supported by the Deutsche Forschungsgemeinschaft (DFG) in the framework of the priority programme SPP1154 “Antarctic Research with comparative investigations in Arctic ice areas”. Kerguelen data were supported by the French Polar Institute Paul Emile Victor (IPEV, program no. 354 to FB). Work on Diego Ramírez Islands was supported by Armada de Chile (Chilean Navy, 3rd Naval Zone), With the institutional support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

The total mRNA concentration buffering system in yeast is global rather than gene-specific

  • García-Martínez, José
  • Medina, Daniel A.
  • Bellvís, Pablo
  • Sun, Mai
  • Cramer, Patrick
  • Chávez, Sebastián
  • Pérez-Ortín, José Enrique
Gene expression in eukaryotes does not follow a linear process from transcription to translation and mRNA degradation. Instead it follows a circular process in which cytoplasmic mRNA decay crosstalks with nuclear transcription. In many instances, this crosstalk contributes to buffer mRNA at a roughly constant concentration. Whether the mRNA buffering concept operates on the total mRNA concentration or at the gene-specific level, and if the mechanism to do so is a global or a specific one, remain unknown. Here we assessed changes in mRNA concentrations and their synthesis rates along the transcriptome of aneuploid strains of the yeast Saccharomyces cerevisiae. We also assessed mRNA concentrations and their synthesis rates in nonsense-mediated decay (NMD) targets in euploid strains. We found that the altered synthesis rates in the genes from the aneuploid chromosome and the changes in their mRNA stabilities were not counterbalanced. In addition, the stability of NMD targets was not specifically compensated by the changes in synthesis rate. We conclude that there is no genetic compensation of NMD mRNA targets in yeast, and total mRNA buffering uses mostly a global system rather than a gene-specific one., This work was funded with grants from the Spanish Ministry of Economy and Competitiveness, the European Union (FEDER) [BFU2016-77728-C3-1-P to S. C.], [BFU2016-77728-C3-3-P to J.E.P -O] and [RED2018-102467-T to J.E.P -O and S.C.], the Regional Valencian Government [AICO2019/088 to J.E.P-O] and the Junta de Andalucía [BIO-271 to S.C.]., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Analytical Strategy for Identification and Quantification of 13 Steroids in Sole (Solea senegalensis) Tissues, Eggs, and Larvae for Application in Aquaculture Studies of Reproduction

  • Serrano, Roque
  • Beltrán, Eduardo
  • Piquer, Vanesa
  • Hernández Hernández, Félix
  • Mañanós, Evaristo L.
Knowing the levels of steroids in fish is crucial for understanding the reproductive processes during fish development and for reproductive success in aquaculture facilities. Although some of these compounds are present at very low concentrations, they play a relevant role in reproduction processes. Therefore, a very sensitive and reliable analytical methodology is required for their accurate determination. In this work, ultra-high-performance liquid chromatography coupled to tandem mass spectrometry with a triple quadrupole has been optimized for the identification and quantification of 13 steroids in plasma, muscle, and ovaries of sole (Solea senegalensis) and, for the first time, in fish eggs and larvae. This is noteworthy because studying fish development in its early stages could be the key to solving the reproductive problems observed in farmed specimens. Different strategies have been applied to solve analytical challenges such as matrix effects or the small amount of sample available. Compounds selected include progestagens (progesterone, 17α,20β-dihydroxypregnenone, and 17α,20β,21-trihydroxypregnenone), androgens (androstenedione, 11β-hydroxyandrostenedione, 11-ketoandrostenedione, testosterone, 5α-dihydrotestosterone, and 11-ketotestosterone), estrogens (estrone and estradiol), and corticosteroids (cortisol and 11-deoxycortisol). The methodology was validated in terms of accuracy (between 73% and 131%) and precision (relative standard deviations of <24%), at concentrations as low as 0.1 ng/mL for plasma, 0.1 ng/g for muscle and eggs, and 0.5 ng/g for ovaries and larvae. The application of the developed methodology to the analysis of samples from captive fish has allowed the identification and quantification of steroids at sub-nanogram per millilier and sub-nanogram per gram levels., The authors acknowledge the financial support of the Programa Estatal de Investigación, Desarrollo e Innovación orientada a los retos de la sociedad (Ministerio de Economia y Competitividad, Spain): Research Project “Ritmos embrionarios y larvarios: papel de los ciclos ambientales en el desarrollo. Determinación/diferenciación sexual y reproducción del lenguado” (AGL2013-49027-C3-3-R). This work has been developed within the framework of the Research Unit of Marine Ecotoxicology (IATS-CSIC/IUPA-UJI). E.B. thanks University Jaume I for the financial support via his postdoctoral contract (POSDOC/2016/19). IUPA authors acknowledge the financial support of Generalitat Valenciana (Research Excellence Group Prometeo/2019/040).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Integrated Seismic Program (ISP): A New Python GUI‐Based Software for Earthquake Seismology and Seismic Signal Processing

  • Cabieces, Roberto
  • Olivar-Castaño, Andrés
  • Junqueira, Thiago C.
  • Relinque, Jesús
  • Fernández-Prieto, Luis
  • Vackár, Jiří
  • Barco, Jaime
  • Pazos, Antonio
  • García‐Martínez, Luz
14 pages, 9 figures, appendices, Integrated Seismic Program (ISP) is a graphical user interface designed to facilitate and provide a user‐friendly framework for performing diverse common and advanced tasks in seismological research. ISP is composed of five main modules for earthquake location, time–frequency analysis and advanced signal processing, implementation of array techniques to estimate the slowness vector, seismic moment tensor inversion, and receiver function computation and analysis. In addition, several support tools are available, allowing the user to create an event database, download data from International Federation of Digital Seismograph Networks services, inspect the background noise, and compute synthetic seismograms. ISP is written in Python3, supported by several open‐source and/or publicly available tools. Its modular design allows for new features to be added in a collaborative development environment, Funding was provided by the Spanish Navy Observatory and this work was supported in part by the Spanish Ministerio de Economía, Industria y Competitividad project CGL2013-45724-C3-3-R and CGL2017-86097-R and from the Spanish Ministerio de Asuntos Económicos y Transformación Digital project A-TIC-215-UGR18, With the institutional support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamic linear models for policy monitoring. The case of maternal and neonatal mortality in Ghana

  • Adebanji, Atinuke
  • Ríos Insua, David
  • Ruggeri, Fabrizio
Monitoring is a major step in policy analysis used to assess whether a policy is actually working as desired. We provide a general policy monitoring approach based on Bayesian forecasting models. These are employed to predict the evolution of relevant monitoring variables over time and support expected utility calculations to assess the efficiency of the policy. We illustrate the approach by monitoring the Free Maternal Health Care and MDG5 Acceleration Framework policies aimed to reduce maternal and neonatal mortality in Ghana, using dynamic linear models for forecasting purposes. Despite major investments, results at national level suggest no significant improvement in maternal and neonatal survival between pre- and post-policy periods. However, regional analyses show that gains have actually been attained in certain regions, suggesting possible directions for improvements nationwide., The work of AA was supported by the Women for Africa Foundation. FR acknowledges the contribution of the Comunidad de Madrid through its programme on Catedra de Excelencia and the AXA ICMAT Chair. The work of DRI is supported by the MTM2017-86875-C3-1-R AEI/ FEDER EU project and the AXA-ICMAT Chair on Adversarial Risk Analysis.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetization pinning in modulated nanowires: from topological protection to the “corkscrew” mechanism

  • Fernández-Roldán, José A.
  • Pérez del Real, Rafael
  • Bran, Cristina
  • Vázquez Villalabeitia, Manuel
  • Chubykalo-Fesenko, O.
[EN] Diameter-modulated nanowires offer an important paradigm to design the magnetization response of 3D magnetic nanostructures by engineering the domain wall pinning. With the aim to understand its nature and to control the process, we analyze the magnetization response in FeCo periodically modulated polycrystalline nanowires varying the minor segment diameter. Our modelling indicates a very complex behavior with a strong dependence on the disorder distribution and an important role of topologically non-trivial magnetization structures. We demonstrate that modulated nanowires with a small diameter difference are characterized by an increased coercive field in comparison to the straight ones, which is explained by a formation of topologically protected walls formed by two 3D skyrmions with opposite chiralities. For a large diameter difference we report the occurrence of a novel pinning type called here the ¿corkscrew¿: the magnetization of the large diameter segment forms a skyrmion tube with a core position in a helical modulation along the nanowire. This structure is pinned at the constriction and in order to penetrate the narrow segments the vortex/skyrmion core size should be reduced., Spanish Ministry of Economy, Industry and Competitiveness (MINECO) under the grants MAT2016-76824-C3-1-R and FIS2016-78591-C3-3-R. J. A. F.-R. acknowledges support from MINECO and ESF though the fellowship BES-2014-068789, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal calibration of the MEDA-TIRS radiometer onboard NASA's Perseverance rover

  • Sebastián-Martínez, Eduardo
  • Martínez Martínez, Germán
  • Ramos, Miguel
  • Pérez-Grande, I.
  • Sobrado, Jesús Manuel
  • Rodríguez-Manfredi, José Antonio
This article describes a comprehensive testing method for the thermal calibration of the Thermal InfraRed Sensor (TIRS) onboard NASA's Perseverance rover. Ground-based IR detectors operating at the surface of Mars are subjected to inaccuracies caused by the inclusion of thermal gradients in their packages. To reduce such uncertainties, it is necessary to compensate for their effects. Here, details of the TIRS thermo-mechanical design and a simplified thermal mathematical model (TMM) that accounts for the presence of thermal gradients in the detector's package are provided. Then, a set of equations for the estimation and compensation of thermal gradients are proposed based on the results of the TMM. Thermal calibration tests to identify the mathematical estimators are analyzed, providing details of the test setups and highlighting their limitations and restrictions. Finally, experimental results of the calibration tests are presented, along with the uncertainty sources and potential systematic errors associated with the estimation of the gradients. The results presented here show a significant improvement in the accuracy of TIRS versus previous work, thus fulfilling of the radiometer scientific requirements set by the Mars 2020 science team., Instituto Nacional de Técnica Aeroespacial (INTA), Plan Estatal de I+D+I [ESP2014-54256-C4-1-R, ESP2015-68281-C4-1-R, ESP2016-79612-C3-1-R, RTI2018-099825-B-C31 and MDM-2017-0737], CDTI, USRA Contract Number 1638782, and LPI Contribution No 2369 (LPI is operated by USRA under a cooperative agreement with the Science Mission Directorate of the National Aeronautics and Space Administration)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carborane-BODIPY Dyads: New Photoluminescent Materials through an Efficient Heck Coupling

  • Bellomo, Chiara
  • Chaari, Mahdi
  • Cabrera González, Justo
  • Blangetti, Marco
  • Lombardi, Chiara
  • Deagostino, Annamaria
  • Viñas, Clara
  • Gaztelumendi, Nerea
  • Nogués, Carme
  • Núñez Aguilera, Rosario
  • Prandi, Cristina
A small library of carborane-BODIPY/aza-BODIPY dyads were efficiently synthesized by means of a novel convergent synthetic approach, the key step of which is a Pd-catalyzed Heck coupling reaction. The structural characterization and photoluminescence properties of the newly synthesized dyads were evaluated. The presence of the carborane did not significantly alter the photophysical patterns of the BODIPY or aza-BODIPY in the final fluorophores, but it produced a decrease of the emission fluorescent quantum yields that was in the range from 1.4 % for aza-BODIPY to 48 % for BODIPY-dyads. The carborane-BODIPY dyads were successfully incorporated into cells, especially compounds 2, 4 and 13, demonstrating their cytoplasmic localization. The fluorescent and biocompatibility properties make these compounds good candidates for in vitro cell tracking., We acknowledge the italian MIUR and the Cassa di Risparmio di Torino for support as well as Prof. Claudio Medana (UNITO) for HRMS measurements. The work was also supported by the Spanish Ministerio de Economía y Competitividad, MINECO, [CTQ2016-75150-R, MAT2017-86357-C3-3-R and “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496)] and Generalitat de Catalunya (2017-SGR-1720, 2017-SGR-503). The authors also wish to thank the Servei de Microscopia at the UAB. M.C. is enrolled in the Université Sfax Ph.D. program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Science with the space-based interferometer LISA. IV: Probing inflation with gravitational waves

  • Bartolo, Nicola
  • Caprini, Chiara
  • Domcke, Valerie
  • Figueroa, Daniel G.
  • Garcia-Bellido, Juan
  • Guzzetti, Maria Chiara
  • Liguori, Michele
  • Matarrese, Sabino
  • Peloso, Marco
  • Petiteau, Antoine
  • Ricciardone, Angelo
  • Sakellariadou, Mairi
  • Sorbo, Lorenzo
  • Tasinato, Gianmassimo
We investigate the potential for the LISA space-based interferometer to detect the stochastic gravitational wave background produced from different mechanisms during in ation. Focusing on well-motivated scenarios, we study the resulting contributions from particle production during in ation, in ationary spectator fields with varying speed of sound, effective field theories of in ation with specific patterns of symmetry breaking and models leading to the formation of primordial black holes. The projected sensitivities of LISA are used in a model-independent way for various detector designs and configurations. We demonstrate that LISA is able to probe these well-motivated in ationary scenarios beyond the irreducible vacuum tensor modes expected from any in ationary background., We thank Germano Nardini for helping in this project. We thank the University of Stavanger for hosting the second eLISA workshop, where this work has started. M.C.G. and N.B. thank Matteo Fasiello for useful correspondence. V.D. acknowledges the nancial support of the UnivEarthS Labex program at Sorbonne Paris Cit e (ANR-10-LABX-0023 and ANR- 11-IDEX-0005-02) and the Paris Centre for Cosmological Physics. The work of J.G-B. is partially supported by the Research Project of the Spanish MINECO, FPA2013-47986-03- 3P, and the Centro de Excelencia Severo Ochoa Program SEV-2012-0249. M.C.G. thanks nancial support from a Cariparo foundation grant. N.B., M.L. and S.M. acknowledge partial nancial support by the ASI/INAF Agreement I/072/09/0 for the Planck LFI Activity of Phase E2. The work of M.P. is partially supported from the DOE grant DE-SC0011842 at the University of Minnesota. The work of L.S. is partially supported by the US NSF grant PHY-1520292. The work of G.T. is partially supported by STFC grant ST/N001435/1., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparing the impacts of drip irrigation by freshwater and reclaimed wastewater on the soil microbial community of two citrus species

  • Bastida, F.
  • Torres Bocero, Irene Florentina
  • Abadía Bayona, Javier
  • Romero-Trigueros, Cristina
  • Ruiz Navarro, Antonio
  • Alarcón Cabañero, Juan José
  • García Izquierdo, Carlos
  • Nicolás Nicolás, Emilio
The search for new water resources for irrigation is a mandatory requirement in Mediterranean agroecosystems. The impacts of irrigation with water from different origins were evaluated in the soil microbial community and plant physiology of grapefruit and mandarin trees in the south-east of Spain. The following treatments were considered: i) freshwater with an electrical conductivity (EC) of 1.0 dS m−1 from the “Tagus-Segura” water-transfer canal and well (TW); ii) reclaimed water (EC = 3.21 dS m−1) from a wastewater-treatment-plant (RW); iii) irrigation with TW, except in the second stage of fruit development, when RW was utilized (TWc); and iv) irrigation with RW except in the second stage, when TW was used (RWc). Phospholipid fatty acids (PLFAs) revealed that microbial biomass was higher in the grapefruit soil than in the mandarin soil. In grapefruit soil, TW treatment showed a lower bacterial PLFA content than RW, RWc, and TWc, while RW showed the lowest values in the mandarin soil. In grapefruit soil, β-glucosidase and cellobiohydrolase activities were greater in RW and TWc than in TW and RWc. Under mandarin, the greatest activity of these enzymes was recorded in the TWc treatment. The saline stress caused lower net photosynthesis (A) and stomatal conductance (gs) in plants of RW, RWc and TWc than in plants of TW treatment. The annual use of reclaimed water or the combined irrigation with TWc benefited microbial biomass and enzyme activities of grapefruit soil. In contrast, the microbial community of mandarin soil seemed more affected by the annual irrigation with reclaimed water, Felipe Bastida is grateful the Spanish Government for his “Ramón y Cajal” contract (RYC-2012-10666) and FEDER funds. The authors thank the Spanish Ministry for the projects AGL2014-54636-R, AGL2017-85755-R, AGL2010-16707, AGL2010-17553, AGL2013-49047-C2-2-R AGL2016-77282-C3-1-R and PCIN-2015-235. The authors are grateful to the Fundación Séneca (19896/GERM/15 and 19903/GERM/15). Authors declare that there is not conflict of interest, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Parametric resonance in the early Universe - A fitting analysis

  • Figueroa, Daniel G.
  • Torrentí, Francisco
Particle production via parametric resonance in the early Universe, is a non-perturbative, non-linear and out-of-equilibrium phenomenon. Although it is a well studied topic, whenever a new scenario exhibits parametric resonance, a full re-analysis is normally required. To avoid this tedious task, many works present often only a simplified linear treatment of the problem. In order to surpass this circumstance in the future, we provide a fitting analysis of parametric resonance through all its relevant stages: initial linear growth, non-linear evolution, and relaxation towards equilibrium. Using lattice simulations in an expanding grid in 3+1 dimensions, we parametrize the dynamics' outcome scanning over the relevant ingredients: role of the oscillatory field, particle coupling strength, initial conditions, and background expansion rate. We emphasize the inaccuracy of the linear calculation of the decay time of the oscillatory field, and propose a more appropriate definition of this scale based on the subsequent non-linear dynamics. We provide simple fits to the relevant time scales and particle energy fractions at each stage. Our fits can be applied to post-inflationary preheating scenarios, where the oscillatory field is the inflaton, or to spectator-field scenarios, where the oscillatory field can be e.g. a curvaton, or the Standard Model Higgs., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gravitational wave production from preheating: parameter dependence

  • Figueroa, Daniel G.
  • Torrenti, Francisco
Corrected typos, matches version published in JCAP (39 pages + appendix, 11 figures), Parametric resonance is among the most efficient phenomena generating gravitational waves (GWs) in the early Universe. The dynamics of parametric resonance, and hence of the GWs, depend exclusively on the resonance parameter $q$. The latter is determined by the properties of each scenario: the initial amplitude and potential curvature of the oscillating field, and its coupling to other species. Previous works have only studied the GW production for fixed value(s) of $q$. We present an analytical derivation of the GW amplitude dependence on $q$, valid for any scenario, which we confront against numerical results. By running lattice simulations in an expanding grid, we study for a wide range of $q$ values, the production of GWs in post-inflationary preheating scenarios driven by parametric resonance. We present simple fits for the final amplitude and position of the local maxima in the GW spectrum. Our parametrization allows to predict the location and amplitude of the GW background today, for an arbitrary $q$. The GW signal can be rather large, as $h^2\Omega_{\rm GW}(f_p) \lesssim 10^{-11}$, but it is always peaked at high frequencies $f_p \gtrsim 10^{7}$ Hz. We also discuss the case of spectator-field scenarios, where the oscillatory field can be e.g.~a curvaton, or the Standard Model Higgs., This work is supported by the Research Project of the Spanish MINECO FPA2015-68048-C3-3-P and the Centro de Excelencia Severo Ochoa Program SEV-2016-0597. F.T. is supported by the FPI-Severo Ochoa Ph.D. fellowship SVP-2013-067697, Peer reviewed