Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 95
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Contribución de congreso (ConferenceOutput)

EA-based ASV trajectory planner for detecting cyanobacterial blooms in freshwater

  • Carazo Barbero, Gonzalo
  • Besada Portas, Eva
  • Risco Martín, José Luis
  • López Orozco, José Antonio
Cyanobacterial Blooms (CBs) constitute a relevant ecological and public health problem since they often produce toxic metabolites that endanger the lives of many species, and they prevent human water consumption and recreational use. To determine the locations of CBs in lentic water bodies, we present a new planner based on Evolutionary Algorithms (EAs) that optimizes the trajectory of an Autonomous Surface Vehicle (ASV) equipped with a probe capable of detecting CBs. The planner 1) exploits the information provided by a particle transport simulator that determines the CB distribution from the water currents and the inherent CB behavior (in particular, its biological growth and vertical displacements) and 2) is supported by an EA that optimizes the mission duration, the ASV trajectory length, and the contributions of each simulated particle to the predicted cyanobacterial concentration along the ASV trajectory. The planner also ensures the trajectory feasibility from the ASV, probe, and water body perspective; and refines the trajectory shape by increasing the number of the decision variables during the iteration of an EA supported by usual NSGA-II operations. The results over different scenarios show that the planner determines overall good solutions that adapt the ASV trajectory to the evolution of CB distribution.
RIUMA. Repositorio Institucional de la Universidad de Málaga
Publicación Contribución de congreso (ConferenceOutput)

Adaptación climática en destinos turísticos litorales: sistema de indicadores soludable

  • Arjona-Fernández, Laura
  • Navarro-Jurado, Enrique
  • Guevara-Plaza, Antonio
El cambio climático representa una de las mayores amenazas para la salud pública a nivel global, debido al aumento sostenido de las temperaturas y una mayor exposición a la radiación ultravioleta. Este escenario es crítico en los destinos turísticos litorales, donde la exposición solar prolongada es una práctica habitual y un componente central de la experiencia vacacional (de la Vara et al., 2024; Gómez Martín, 2005). Ante esta realidad, se vuelve imperativo adoptar estrategias de adaptación que integren la salud en la gestión turística, siendo la fotoprotección una respuesta preventiva frente a los efectos de la urgencia climática sobre la salud.
RIUMA. Repositorio Institucional de la Universidad de Málaga
Publicación Contribución de congreso (ConferenceOutput)

Consumo energético de algoritmos evolutivos en C++: impacto del compilador y el nivel de optimización.

  • Cotta-Porras, Carlos
  • Martínez-Cruz, Jesús
Este trabajo estudia el consumo energético de los algoritmos evolutivos (AEs) atendiendo a las decisiones tomadas durante la construcción del programa ejecutable, particularmente la elección del compilador y las opciones de optimización empleadas. El estudio abarca el caso de AEs implementados en C++ y compilados para Windows con dos herramientas distintas: Clang y Microsoft Visual C++. Para cada compilador se consideran cuatro niveles diferentes de optimización en el código ejecutable obtenido. A partir de un banco de pruebas compuesto por funciones de optimización numérica de alta dimensionalidad, se observa cómo hay diferencias muy significativas a favor de Clang tanto en tiempo de cómputo como en energía consumida. Se aprecia también cómo, en términos de energía total, no hay apenas diferencias significativas entre los niveles de optimización más altos para cada compilador, pero sí las hay en el perfil de potencia desarrollada por el procesador y en la temperatura del mismo, atendiendo al compilador empleado., Ministerio de Ciencia, Innovación y Universidades
RIUMA. Repositorio Institucional de la Universidad de Málaga
Publicación Contribución de congreso (ConferenceOutput)

Learner-centered activities for engineering students using a dynamic teaching methodology

  • Martín-Rivas, Sebastián
  • Durán-Martínez, Mario Javier
  • De-la-Torre-Fazio, Sebastián Bienvenido
  • Aguado-Sánchez, José Antonio
  • López Pérez, Miguel Ángel
  • Subires-Mancera, María Purificación
Artículo de 6 páginas (doble columna, en inglés) desarrollado dentro del Proyecto de Innovación Educativa PIE10-024 (convocatoria de la Universidad de Málaga 2010-2012), y presentado (ponencia oral en inglés) en el congreso internacional con revisión por pares IEEE EDUCON 2012, celebrado en Marrakesh (Morocco), ISSN: 2165-9559, E-ISBN: 978-1-4673-1455-8, DOI: 10.1109/EDUCON.2012.6201125., This work proposes a series of activities to promote the motivation and curiosity of engineering students. The activities are designed and coordinated to progressively involve the student in the subject through the use of a dynamic methodology. The proposal includes monitored problem-solving, small application problems, cooperative activities and challenging problems. This methodology is tested in two student groups: second year students (Electric Circuits) and third-year students (Electrical Machines)., Universidad de Málaga a través de la convocatoria de Proyectos de Innovación Educativa 2010-2012
RIUMA. Repositorio Institucional de la Universidad de Málaga
Publicación Contribución de congreso (ConferenceOutput)

Evaluating the Impact of Hysteretic Phenomena and Implementation Choices on Energy Consumption in Evolutionary Algorithms.

  • Cotta-Porras, Carlos
  • Martínez-Cruz, Jesús
Associated research data: Cotta, C., & Martínez-Cruz, J. (2025, February 27). Rundata on EA Energy Consumption: Hysteresis. Retrieved from osf.io/xd54u, As the demand for environmentally sustainable computing grows, understanding the energy consumption of AI systems has become increasingly important. This paper explores how hysteretic phenomena and implementation choices affect the energy consumption of evolutionary algorithms (EAs). Specifically, we consider the case of running EAs in batch and show how back-to-back executions can put a significant strain on the underlying processing device, resulting in increased energy consumption. An experimental analysis indicates that the introduction of short pauses can alleviate this problem and reduce consumption by up to 9% in the considered benchmark. We also conduct a comparative analysis between two twin implementations of the same EA library in Java and C++, revealing that the latter scales better in terms of energy efficiency and running time, thus underpinning the importance of implementation decisions and best practices when aiming to optimize an algorithm’s energy consumption., Spanish Ministry of Science and Innovation
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Gleason Grading of Histology Prostate Images through Semantic Segmentation via Residual U-Net

  • Kalapahar, Amartya
  • Silva-Rodríguez, Julio José
  • Colomer, Adrián|||0000-0002-7616-6029
  • López-Mir, Fernando|||0000-0001-8286-6796
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
[EN] Worldwide, prostate cancer is one of the main cancers affecting men. The final diagnosis of prostate cancer is based on the visual detection of Gleason patterns in prostate biopsy by pathologists. Computer-aided-diagnosis systems allow to delineate and classify the cancerous patterns in the tissue via computer-vision algorithms in order to support the physicians¿ task. The methodological core of this work is a U-Net convolutional neural network for image segmentation modified with residual blocks able to segment cancerous tissue according to the full Gleason system. This model outperforms other well-known architectures, and reaches a pixel-level Cohen¿s quadratic Kappa of 0.52, at the level of previous image-level works in the literature, but providing also a detailed localisation of the patterns., This work was supported by the Spanish Ministry of Economy and Competitiveness through project DPI2016-77869. The work of Fernando Lopez-Mir has been supported by the Polytechnic University of Valencia (Grant PAID-10-18). The Titan V used for this research was donated by the NVIDIA Corporation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Using Diffusion Models for Data Augmentation on Limited Rodent OCT Datasets

  • García-Torres, Fernando|||0000-0002-5337-8774
  • del Amor, Rocío
  • Morales, Sandra|||0000-0003-0763-1545
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
  • Barroso, Álvaro
  • Kemper, Björn
  • Schnekenburger, Jürgen
[EN] Optical coherence tomography (OCT) has transformed ophthalmology by enabling accurate diagnosis of retinal diseases. OCT in rodents is used in research studies of ophthalmic diseases and treatment evaluation. However, the scarcity of data limits the effectiveness of deep learning models for this purpose. This study explores the use of synthetic data generation to improve deep learning models for OCT image analysis from rodent retinas. To address this, the research leverages advanced class-conditional generative models to create high-quality synthetic images of ex-vivo rodent retinas embedded in two different mediums (solid resin and liquid media) with a reduced initial database. The conditional Denoising Diffusion Probabilistic Model (DDPM) proved to be the best model, as it produces more realistic images that closely mimic the characteristics of real rodent retinal scans. By augmenting the training datasets with these synthetic images, the performance of deep learning models in segmenting retinal layers improved by 7%. This approach reduces reliance on scarce biological samples and animal testing, promoting ethical research practices while improving the accuracy and efficiency of AI-driven medical diagnostics. The integration of synthetic data generation represents a significant advance in medical imaging, offering a scalable solution to data scarcity, generating reliable samples in two mediums and promoting the development of more robust and accurate diagnostic tools., This work has received funding from Horizon Europe, the European Union s Framework Programme for Research and Innovation, under Grant Agreement No. 101070062 (SEQUOIA). Generalitat Valenciana partially funded this work through project CIPROM/2022/20. The work of Sandra Morales has been cofunded by the Universitat Polit`ecnica de Val`encia, Spain through the program PAID10-20. The work of Rocio del Amor has been supported by the Spanish Ministry of Universities under an FPU Grant (FPU20/05263).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Large-Scale Tests on RC Purpose-Built Buildings for Improving Robustness

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Adam, Jose M|||0000-0002-9205-8458
  • Mezquida-Alcaraz, Eduardo J.
[EN] Although recent years have been marked by a substantial research effort on the progressive collapse of steel as well as cast-in-place and precast concrete structures, the fact is that almost all studies are focused on reduced-scale tests, tests on isolated frame structures, tests on substructures or analytical and numerical analysis. Within this context, large-scale tests avoid size effects and allow all resisting mechanisms that a structure can develop after an initial-local failure to be studied. This paper presents the case of large-scale tests performed on two purpose-built buildings: one made of cast-in-place concrete and the other with precast concrete elements. In both cases, sudden column removal scenarios were considered for the robustness assessment of the structural system. The structures were provided with simple solutions to enhance the robustness and arrest progressive collapse initiated by the sudden failure of a column. The cast-in-place concrete building had two 3 m high floors, with 2 × 2 bays of 5 m span length. The total in-plan dimensions of the building were 10 × 10 m2. This building was subjected to sudden corner column failure scenarios with and without the presence of infill masonry walls. The precast concrete structure also had two 3 m high floors, with 3 × 2 bays of 5 m and 6 m span, respectively. The total in-plan dimensions of the building were 15 × 12 m2. This building was subjected to sudden column failure scenarios for three different tests, involving the removal of: a corner column, an edge column in a frame parallel to the direction of one-way hollow-core slabs, and an edge column in a frame perpendicular to the one-way slabs. This paper presents and discusses a summary of the results and outcomes of these studies., The work for the cast-in-place concrete building was carried out with the support of a 2017 Leonardo Grant for Researchers and Cultural Creators from the BBVA Foundation. The work for the precast concrete building was carried out with the funding received through grant BIA2017-88322-R-AR funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe. This research also serves as the basis of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant Agreement No. 101000396). The authors would also like to express their gratitude to the Levantina, Ingeniería y Construcción S.L. (LIC) company for funding the construction of the building, and to the Generalitat Valenciana/Fons Social Europeu [APOSTD/2019/101], grant IJC2020-042642-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGeneration EU/PRTR, and Universitat Politècnica de València [PAID-10-17] for funding received under different postdoctoral programs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Analysis of fire behavior in semi-real forest scenarios by integrating tls data into physical simulation models

  • Simo-Marti, Marina|||0000-0001-9605-9645
  • Crespo-Peremarch, Pablo|||0000-0003-2241-4493
  • Torralba, Jesús|||0000-0001-8644-8604
  • Ruiz Fernández, Luis Ángel|||0000-0003-0073-7259
[EN] In view of the increasing intensity and frequency of large forest fires, the study and simulation of fire behavior in Mediterranean forests appears as a crucial task to define prevention and extinction strategies. The physical model Fire Dynamics Simulator (FDS) allows the analysis of fire behavior in 3D scenarios at high levels of resolution by introducing LiDAR point clouds to describe the structure and characteristics of the vegetation. The main objective of this paper is the analysis of fire behavior in Mediterranean forest semi-real scenarios, by modifying structural properties of the forest related to the horizontal and vertical continuity of the vegetation. To achieve this goal, a methodology has been developed to generate scenarios from real segmented and voxelized individuals of Mediterranean shrubland and tree species. These models were obtained from TLS (Terrestrial Laser Scanning) in plots located in La Serra d'Espadà. The methodology considers the distribution of biomass at individual and voxel level, taking into account a heterogeneous distribution of the bulk density of forest fuel, estimated based on the proportion of returns from the point cloud. Finally, for the analysis of the results, the evolution graphs of the following model output variables have been studied: the rate of spread, the heat release rate, the mass loss rate and the percentage of biomass consumed. Preliminary findings indicate that horizontal continuity of vegetation is the main driver for the development of steady and sustained fires. , This work was supported by (i) PID2020-117808RBC21/AEI/10.13039/50110001103 and FSE+ “Invierte en tu Futuro” under Grant PRE2021-099526; and (ii) “Programa de Contratos de Acceso de Personal Investigador Doctor” (PAID-10-22) from “Vicerrectorado de Investigación de la Universitat Politècnica de València”.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Introduction of a practical lesson for the evaluation of bioactive quality in plant materials addressed to students in Plant Breeding

  • Guijarro-Real, Carla
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Gramazio, Pietro|||0000-0003-2226-7999
  • Adalid-Martinez, Ana Maria|||0000-0002-3927-1348
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Rodríguez Burruezo, Adrián|||0000-0002-4530-8071
  • Fita, Ana|||0000-0002-8637-5852
[EN] According to the new market trends, one of the goals in many modern breeding programmes is the development of varieties with enhanced bioactive properties. Despite the importance of evaluating the content of specific molecules, the analysis of the broad antioxidant capacity is often suitable. For instance, if the goal is to evaluate large quantity of materials, or even to compare different agronomical practices to obtain the highest antioxidant properties. Thus, studies related to plant breeding should include subjects related to the knowledge of analytical methods for the evaluation of the bioactive properties in the materials tested. Theoretical lessons establish the basis for understanding the importance of bioactive properties and the influence of stresses in their content. Nevertheless, practical sessions complement this knowledge and improve the competence of future professionals, providing them a tool for the evaluation of bioactive quality in developing breeding materials. We consider therefore that this competence should be acquired during the Master degree in Plant Breeding offered by our institute. Thus, we propose to introduce a practical lesson in the mandatory subject "Instrumental Techniques" aimed to the comparison of two analytical methods for the analysis of bioactive properties. As plant material, we will use water celery, an herbaceous species with great antioxidant properties. The methodology will include the analysis of the antioxidant activity with the DPPH method and the content in total phenolics, both spectrophotometric methods but measuring different aspects of the bioactive quality. The lesson is divided in three sessions of three hours each, in the course of which students will perform all steps for these analyses, including sample preparation, extraction of bioactive molecules, preparation of the calibration curve, and analysis of results. This practical lesson provides students with the competence to evaluate the antioxidant activity of high number of materials using quick and simple spectrophotometric methodologies, and to deal with real problems such as the need of dilution for samples with very high content of bioactive molecules. Moreover, the practical lesson provides the guidelines to adapt the protocols for different materials and consequently to many breeding programmes, and can be also adapted for food technology students., Carla Guijarro-Real is grateful to the Ministerio de Educación, Cultura y Deporte of Spain (MECD) for a predoctoral FPU grant (FPU14-06798). Mariola Plazas is grateful to Generalitat Valenciana and Fondo Social Europeo for a post-doctoral grant (APOSTD/2018/014). Pietro Gramazio is grateful to Universitat Politècnica de València for a post-doctoral contract (PAID-10-18) within the Programa de Ayudas de Investigación y Desarrollo initiative. Ana M Adalid-Martínez is grateful to the Ministerio de Ciencia, Innovación y Universidad of Spain for its support with a post-doctoral contract (PTA2015- 11502-I) within the Subprograma Personal Técnico de Apoyo initiative.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Introduction and development of a practical lesson for improving the competence of Master students in Plant Breeding: The usefulness of specific software in phenotyping tasks

  • Guijarro-Real, Carla
  • Gramazio, Pietro|||0000-0003-2226-7999
  • Plazas Ávila, María de la O|||0000-0001-8090-7312
  • Adalid-Martinez, Ana Maria|||0000-0002-3927-1348
  • Rodríguez Burruezo, Adrián|||0000-0002-4530-8071
  • Prohens Tomás, Jaime|||0000-0003-1181-9065
  • Fita, Ana|||0000-0002-8637-5852
[EN] An essential step in many plant breeding programmes is the morphoagronomic phenotyping of the materials that are being developed, using standardized descriptors or, when not available, as it is the case of new crops, consensus guidelines to characterize them. Although many of the traits must be evaluated in the field, those related to the shape and size of leaves and fruits can be easily measured with specific software using digital pictures. This tool provides several advantages, including: 1) more accurate and objective measurements; 2) the possibility of measuring other traits of interest such as area or perimeter, that in other case would not be easily evaluated; or even 3) the possibility of delaying the analysis of pictures in order to focus on field traits. Therefore, the knowledge and management of this tool can become of high usefulness. The Plant Breeding Master offered by our institute is aimed at training professionals able to improve crops and develop new ones according to market trends, in addition to improve adaptation and resistance to biotic and abiotic stresses. Due to the importance of phenotyping considering any of the above breeding goals, in this paper we propose the introduction of a practical session in the mandatory subject "Instrumental Techniques": the management and comparison of adequacy of two specific software tools considering the material to be analyzed. As material, we propose a collection of pepper varieties for analysis of fruits, and a collection of rocket (Eruca and Diplotaxis spp.) germplasm for analysis of leaves, due to the broad variability observed in those materials. The MorphoLeaf v1.0 software will be used for the analysis of leaves, and the Tomato Analyzer 3.0 software will be used for the analysis of fruits and also for leaves. According to the design of the practical lesson, only one session of three hours is required, in which students will learn to properly digitalize materials considering the restrictions of each software and material used, and to obtain all the information needed in each case. In addition, there will be one hour of autonomous work in which both tools and the results obtained will be compared by the students, and a report will be prepared. This practical lesson allows students to acquire the competence for the correct use of different computer tools in the phenotyping task. The comparison of analyses using different scan adjustments and software will allow students to understand the disadvantages of each option and problems that could occur, in order to minimize them. In summary, this practical lesson gives a tool for improving the future phenotyping works of students during their careers, teaching them to consider the best software prior to analysis in order to improve the digitalizing step according to software restrictions, and to obtain more accurate information with a reduction of working time, thus increasing efficiency., Carla Guijarro-Real is grateful to the Ministerio de Educación, Cultura y Deporte of Spain for a predoctoral FPU grant (FPU14-06798). Pietro Gramazio is grateful to Universitat Politècnica de València for a post-doctoral contract (PAID-10-18) within the Programa de Ayudas de Investigación y Desarrollo initiative. Mariola Plazas is grateful to Generalitat Valenciana and Fondo Social Europeo for a post-doctoral grant (APOSTD/2018/014). Ana M Adalid-Martínez is grateful to the Ministerio de Ciencia, Innovación y Universidad of Spain for its support with a post-doctoral contract (PTA2015- 11502-I) within the Subprograma Personal Técnico de Apoyo initiative.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Nuevos planteamientos en las prácticas de matemáticas con Mathematica en la ETSICCP de Valencia

  • Company Rossi, Rafael|||0000-0001-5217-1889
  • García-Raffi, L. M.|||0000-0003-3985-8453
  • Pérez Peñalver, María José|||0000-0003-0403-1405
  • Rodríguez López, Jesús|||0000-0001-5141-9977
  • Romero Vivó, Sergio|||0000-0001-6689-4324
  • Tirado Peláez, Pedro
  • Ponsoda Miralles, Enrique
[ES] En el contexto de los nuevos planes de estudio, los profesores del departamento de Matemática Aplicada de la ETSICCP de Valencia nos planteamos cómo enfocar las prácticas de informática de las dos asignaturas de primer curso que debíamos impartir. Teníamos la experiencia de los otros planes de estudio en los que se habían diseñado prácticas de informática con los programas Derive y Mathematica, en las que los materiales que se aportaban a los alumnos eran, bien textos en papel, o publicados en un libro, o en otros casos materiales más o menos interactivos en un CD multimedia. En esta ocasión hemos optado por diseñar un tutorial de cada práctica, en formato electrónico, que es un archivo del programa Mathematica, que contiene texto, imágenes, instrucciones, ejemplos y ejercicios. El alumno trabaja cada práctica presencial mediante trabajo autónomo, pero con ayuda del profesor y es evaluado mediante un test que se genera desde baterías de preguntas creadas desde la plataforma PoliformaT de la Universidad Politécnica de Valencia. Debemos señalar que estas prácticas podrían ser perfectamente planteadas también como no presenciales, La presente comunicación ha sido financiada por la Universitat Politècnica de València, a través de la Comisión de Evaluación y Seguimiento de Proyectos de Innovación y Convergencia (CESPIe), en dos Proyectos de Innovación y Mejora Educativa (PIME): ¿ Experimentación y validación de estrategias de evaluación en asignaturas de matemáticas en los grados de Obras Públicas e Ingeniería Civil (2010-2011). PIME B011/10. ¿ Necesidades y soluciones para la evaluación de los estudiantes en títulos de grado y máster (2010-2011). PIME A010/10.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Near-Ground Wireless Coverage Design in Rural Environments

  • Botella-Campos, Marta|||0000-0002-1317-286X
  • Jimenez, Jose M.|||0000-0002-3688-7235
  • Sendra, Sandra|||0000-0001-9556-9088
  • Lloret, Jaime|||0000-0002-0862-0533
[EN] Due to the broad range of options that wireless systems offer, Wi-Fi products are increasingly being used in agriculture environments to improve farming practices and better control the output of the production. However, the foliage has proven to harm radio-frequency propagation as well as decreasing the coverage area of Wireless Sensor Networks (WSNs). Therefore, near-ground channel characterization can help in avoiding high antennas and vegetation. Nevertheless, theoretical models tend to fail when forecasting near-ground path losses. This paper aims at determining how the field components such as soil, grass and, trunks affect radio-links in near-ground scenarios. To do this, we measure the Received Signal Strength (RSSI), the Signal to Interference Ratio (SIR) and the Round-Trip Time (RTT) of a Wireless Local Area Network (WLAN), at different distances, and the results are compared with 3 prediction models: the Free-Space Propagation Model, Two-Ray Ground Reflection Model and, One-Slope Log-Normal Model. The experiment was carried out by collecting experimental data at two different locations, i.e., an orange tree plantation and a field without vegetation, taking measurements every meter. A comprehensive analysis of the influence of rural environments can help to obtain better near-ground WSN performance and coverage in precision agriculture., This work has been partially supported by European Union through the ERANETMED project ERANETMED3- 227 SMARTWATIR, by the Ministerio de Ciencia, Innovación y Universidades through the Ayudas para la adquisición de equipamiento científico-técnico, Subprograma estatal de infraestructuras de investigación y equipamiento científico-técnico (plan Estatal I+D+i 2017- 2020) (project EQC2018-004988-P), by the Universidad de Granada through the "Programa de Proyectos de Investigación Precompetitivos para Jóvenes Investigadores. Modalidad A jóvenes Doctores of "Plan Propio de Investigación y Transferencia 2019" (PPJIA2019.10) and by the Campus de Excelencia Internacional Global del Mar (CEI·Mar) through the "Ayudas Proyectos Jóvenes Investigadores CEI·Mar 2019" (Project CEIJ-020).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Distance and Similarity Measurements of P Waves Before and After Pulmonary Vein Isolation in Patients with Atrial Fibrillation

  • Ortigosa, Nuria|||0000-0002-5272-7661
  • Cano, Óscar
  • Mainardi, Luca
[EN] This study aimed to assess electric markers obtained from the surface electrocardiogram in order to analyse significant differences before and after pulmonary vein isolation in patients who suffered from paroxysmal atrial fibrillation. 30 patients who underwent catheter ablation (in order to permanently restore sinus rhythm and stop atrial fibrillation episodes) were included in the study. Both surface electrocardiogram and intracavitary recordings were simultaneously acquired starting some minutes before catheter ablation began until the whole procedure successfully ended. P-waves have been delineated on V1 lead, and measurements of distances and similarities between them have been obtained to compare the recordings. It has been found that distances between Pwaves significatively decrease (about 14%) whereas similarities significatively increase (about 3%) after catheter ablation. The use of these features would help to identify the success of the catheter ablation procedure, which is the main objective of this preliminary study: the non-invasive identification of spontaneous reconnection of pulmonary veins, the main cause of the arrhythmia recurrences., N. Ortigosa acknowledges the support from Generalitat Valenciana under grant Prometeo/2017/102; from Spanish Ministerio de Educacion, Cultura y Deporte en el marco del Programa Estatal de Promocion del Talento y su Empleabilidad en I+D+i -Subprograma Estatal de Movilidad- under grant Jose Castillejo CAS18/00396; from Spanish MINECO under grant MTM2016-76647-P, and from VLC-BIOMED 2017 (Universitat de Valencia and Hospital La Fe / IIS La Fe) under grant 10-ARVEAP-GALBIS-CANO2017-A.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Dynamic beamforming for large area scan in array-based photoacoustic microscopy

  • Cebrecos, Alejandro|||0000-0001-8790-8668
  • García-Garrigos, Juan José
  • Jimenez, Noe|||0000-0002-6539-670X
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • Descals, Andreu
[EN] We explore the use of a beamforming method intended for large-area scanning in optical-resolution photoacoustic microscopy. It has been evaluated in a experimental setup that comprises a low-cost laser diode and a phase array with a 128-elements linear probe. Three different beamforming strategies are discussed: no-beamforming, static beamforming and dynamic beamforming. The method has been tested in gelatine-based phantoms as well as ex-vivo organs. Results show that, compared with the other two, dynamic beamforming increases up to 15dB and homogenizes signal-to-noise ratio (SNR) along images of roughly 1 cm2. The method and system presented here could be the baseline for more advanced array-based systems that leverage the low-cost laser sources for clinical applications., This research has been supported by the Spanish Ministry of Science, Innovation and Universities through grant Juan de la Cierva - Incorporacion (IJC2018-037897-I), and program Proyectos I+D+i 2019 (PID2019-111436RB-C22). Action co-financed by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana 2014-2020 (IDIFEDER/2018/022). A.C. received financial support from Generalitat Valenciana and Universitat Politecnica de Val ` encia through the grants APOSTD/2018/229 and program PAID-10-19, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Impact of topography and earthworks in utility-scale photovoltaic projects

  • García-Salinas, Conrado
  • Martín Furones, Ángel Esteban|||0000-0001-9379-0694
  • Anquela Julián, Ana Belén|||0000-0001-6024-3790
[EN] In recent years, due to the increase in the number of PV projects worldwide, flat land for PV projects has become scarce. More and more projects are being built on steep terrain. The civil works associated with these topographies have a substantial weight in both the CAPEX and the schedule, and have numerous interactions with other facets of the project such as environmental impact, energy generation, irradiation on the modules, hydrology, etc. The objective of this thesis is to characterise and quantify these interactions in order to gain efficiency in the design and construction of this type of projects. Specifically, three dimensions are studied: the reduction of earth movement, the impact on energy generation and the impact on the environment. Firstly, work has been carried out on mathematical modelling at the structural level of the plant, with the aim of implementing an algorithm to optimise the position of the structures and reduce the associated earthworks in the early stages of the design. The results show that a reduction of the total amount is possible using a simple algorithm based on the mathematical model developed. In addition, work is currently underway to quantify the mismatch losses associated with different factors. For this purpose, real data from panels and structures have been taken and modelled under various conditions. It is hoped that knowledge will be gained to improve production estimates. Finally, a field study has been planned to investigate the importance of vegetation in plant hydrology, as well as methods to maintain this vegetation during dry periods. The intention is to see which methods are most suitable for preventing erosion and landslides and to see if they are feasible from a technical-economic point of view. , This work was supported by the ”Agencia Valenciana de la innovación” under Grant INNTA3/23/10.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

First in-vivo Demonstration of Bilateral Blood-Brain Barrier Opening Using Acoustic Holograms in Mice

  • Jiménez-Gambín, Sergio
  • Pouliopoulos, Antonios N.
  • Konofagou, Elisa E.
  • Jimenez, Noe|||0000-0002-6539-670X
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] Focused ultrasound (FUS) with microbubbles allows for non-invasive targeted drug delivery into the central nervous system (CNS) by temporally and locally disrupting the bloodbrain barrier (BBB). However, current FUS technologies are not able to simultaneously target several brain structures. In this work, we open the BBB in two regions in a murine brain using a single-element transducer with a coupled 3D-printed holographic lens, which is designed to simultaneously create two symmetric foci in anesthetized mice in vivo. The proposed approach shows many advantages: (1) simple and low-cost; (2) correction of aberrations due to skull and water cone; and (3) multiple BBB opening (BBBO) locations with only one sonication, becoming a time- and cost-effective therapeutic system for neurological diseases. For the in-vivo experiment, contrast-enhanced, T1- weighted MRI scan was conducted following BBBO, showing gadolinium extravasation at two symmetric focal spots. The two BBBO regions were separated by 3.0 +- 0.7 mm (n=5 mice) compared to 5.3 mm in full-wave simulations. This work shows the capability of bifocal ultrasound generation in separate animals using a unique uCT scan. A bilateral BBBO was achieved with a single sonication using a holographic lens in mice, thus improving the efficiency and defining a new approach for several neurodegenerative diseases targeting symmetric brain structures, e.g. hippocampus, putamen or caudate. This study demonstrates the feasibility of hologram-assisted BBBO for targeted drug delivery in the CNS in symmetric regions in separate hemispheres., This research has been supported by the Spanish Ministry of Science, Innovation and Universities through grants Juan de la Cierva - Incorporacion (IJC2018-037897-I) and PID2019-111436RB-C22, by the Agencia Valenciana de la Innovación through grant INNVAL10/19/016, by Generalitat Valenciana through grants No. ACIF/2017/045 and BEFPI/2019/075, and by the National Institutes of Health through grants 5R01EB009041 and 5R01AG038961. Action co-financed by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana 2014-2020 (IDIFEDER/2018/022).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Trabajo en equipo: una oportunidad para adquirir dimensiones competenciales

  • Ardid, Miguel|||0000-0002-3199-594X
  • Cuenca-Gotor, Vanesa Paula|||0000-0003-0819-8528
  • Meseguer Dueñas, José María|||0000-0001-7518-7971
  • Molina Mateo, José|||0000-0002-0531-9876
  • Riera Guasp, Jaime|||0000-0002-4183-7195
  • Vidaurre, Ana|||0000-0003-3394-1176
  • Salinas Marín, Isabel
[ES] Se ha utilizado el trabajo en equipo para introducir de manera efectiva competencias transversales entre los objetivos de asignaturas de la materia Física. Se ha comparado el resultado del trabajo en equipo con el indivi-dual, y se ha valorado la evolución de la competencia Comunicarse de manera efectiva de forma escrita a lo largo de un curso trabajando en equipo mediante la utilización de una rúbrica. Por último, se ha encuestado a los alumnos sobre su opinión respecto del método de trabajo, pros y con-tras del trabajo en equipo, sobre el resultado del trabajo en equipo y sobre el papel del profesor. Los resultados muestran que el trabajo en equipo su-pone una mejora en otras competencias transversales, y que la rúbrica es una buena herramienta para evaluarlas. Los alumnos en general tienen buena opinión del trabajo en equipo, aunque manifiestan desequilibrios en el trabajo realizado por los diferentes componentes del mismo., Este trabajo se ha realizado con la financiación de la convocatoria de 2013 de Proyectos de Innovación y Mejora Educativa (PIME) de la Universitat Politècnica de València (referencia B10-13)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Towards a Classifier to Recognize Emotions Using Voice to Improve Recommendations

  • Fuentes-López, José Manuel
  • Rincón Arango, Jaime Andrés
  • Taverner-Aparicio, Joaquín José|||0000-0002-5163-5335
  • Botti V.|||0000-0002-6507-2756
[EN] The recognition of emotions in tone voice is currently a tool with a high potential when it comes to making recommendations, since it allows to personalize recommendations using the mood of the users as information. However, recognizing emotions using tone of voice is a complex task since it is necessary to pre-process the signal and subsequently recognize the emotion. Most of the current proposals use recurrent networks based on sequences with a temporal relationship. The disadvantage of these networks is that they have a high runtime, which makes it difficult to use in real-time applications. On the other hand, when defining this type of classifier, culture and language must be taken into account, since the tone of voice for the same emotion can vary depending on these cultural factors. In this work we propose a culturally adapted model for recognizing emotions from the voice tone using convolutional neural networks. This type of network has a relatively short execution time allowing its use in real time applications. The results we have obtained improve the current state of the art, reaching 93.6% success over the validation set., This work is partially supported by the Spanish Government project TIN2017-89156-R, GVA-CEICE project PROMETEO/2018/002, Generalitat Valenciana and European Social Fund FPI grant ACIF/2017/085, Universitat Politecnica de Valencia research grant (PAID-10-19), and by the Spanish Government (RTI2018-095390-B-C31).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Study of long term fouling on cross flow ultrafiltration

  • Cantó Polo, Rocío Águeda
  • Vincent Vela, Maria Cinta|||0000-0001-8493-0165
  • Cuartas Uribe, Beatriz Elena|||0000-0003-2835-900X
  • Alvarez Blanco, Silvia
  • Lora-García, Jaime|||0000-0003-1699-5404
Ultrafiltration (UF) is a membrane technique whereby water and microsolutes are separated from macromolecules. It has several applications in wastewater treatment and it is also widely used in chemical and food industries. The main disadvantage of UF is membrane fouling, which causes a decline in permeate flux with time. As permeate flux decline highly increases the operation costs, the time-dependence of permeate flux has been studied in many occasions. Most of these studies use protein aqueous solutions (bovine serum albumin, hemoglobin, cheese whey among others) as feed. However, as proteins are charged molecules, they interact with the membrane and their interactions are influenced by the pH of the solution, so the models applied to these kinds of feed solutions should include membrane-solute interaction. When using polythylene glycol (PEG) these interactions may not be considered and the models are simplified., The authors of this work wish to acknowledge the financial support of the Universitat Politècnica de València throught the project "Primeros proyectos de Investigación: Programa de Apoyo a la Investigación y Desarrollo PAID-06-10" and the Spanish Ministry of Science and Innovation throught the project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Multifocal acoustic holograms for deep-brain neuromodulation and BBB opening

  • Andrés, Diana
  • Jiménez-Gambín, Sergio
  • Jimenez, Noe|||0000-0002-6539-670X
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
[EN] Single-element focused ultrasound devices have demonstrated its ability to non-invasively open the Blood Brain Barrier. However, skull irregularities and absorption produce strong aberrations in the ultrasound focus. Recently, 3D-printed acoustic holograms were used to compensate aberrations and to produce a sharp focus. In addition, using this technology the geometry of the ultrasonic focus can be matched to the shape of the brain structure of interest. In this work, we experimentally and numerically report 3D-printed acoustic holograms for bilateral focusing through an ex-vivo human skull. Using holograms, we target different cerebral nuclei and the ultrasonic focuses are adapted to the target volumes, minimizing the acoustic field outside. Simultaneously, skull aberrations are corrected using phased-conjugation methods. The holographic surfaces were manufactured for a 100-mm aperture and 140-mm focal focused transducer at 500 kHz to focus through an ex-vivo human skull. Numerical and experimental results agree targeting several deep-brain nuclei: left-and-right putamen, caudate nuclei, and hippocampi, showing the potential of this low-cost technology to optimize BBBO or neuromodulation treatments., This research has been supported by the Spanish Ministry of Science, Innovation and Universities through grant Juan de la Cierva - Incorporacion (IJC2018-037897-I) and PID2019-111436RBC22, by the Agencia Valenciana de la Innovacio through grants INNVAL10/19/016 and INNCON/2020/009. Action cofinanced by the European Union through the Programa Operativo del Fondo Europeo de Desarrollo Regional (FEDER) of the Comunitat Valenciana 2014-2020 (IDIFEDER/2018/022).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Transmisión inalámbrica multimedia coordinada con DASH-SAND

  • Belda Ortega, Román|||0000-0003-2244-2371
  • Guerri Cebollada, Juan Carlos|||0000-0002-5807-1923
  • De Fez Lava, Ismael
[EN] The adoption of DASH (Dynamic Adaptive Streaming over HTTP) as a video transmission standard has introduced new challenges in environments with high density of Wi-Fi clients. If video players do not take into account the playback status of other devices in the network unfair bandwidth distribution may cause playback problems (stalls, low playback quality, etc.). This paper proposes a collaborative playback technique based on DASH-SAND (MPEG¿s Server and Network Assisted DASH) that aims to reduce, in a collaborative way, the number of interruptions in the playback of multimedia content in Wi-Fi environments with high density of users. Results prove that the proposed solution reduces both the number and duration of stalls at the expense of decreasing the average representation of the playback., Este trabajo ha sido subvencionado por el Programa PAID10-18 así como por el Proyecto Línea de I+D+i Tecnologías de distribución y procesado de información multimedia y QoE de la Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Towards the edge intelligence: Robot assistant for the detection and classification of human emotions

  • Rincón Arango, Jaime Andrés
  • Julian, Vicente|||0000-0002-2743-6037
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
[EN] Deep learning is being introduced more and more in our society. Nowadays, there are very few applications that do not use deep learning as a classification tool. One of the main application areas is focused on improving people¿s life quality, allowing to create personal assistants with canned benefits. More recently, with the proliferation of mobile computing and the emergence of the Internet of Things (IoT), billions of mobile and IoT devices are connected to the Internet. This allows the generation of millions of bytes of information about sensors, images, sounds, etc. Driven by this trend, there is an urgent need to push the IoT frontiers to the edge of the network, in order to decrease this massive sending of information to large exchanges for analysis. As a result of this trend, a new discipline has emerged: edge intelligence or edge AI, a widely recognised and promising solution that attracts with special interest to the community of researchers in artificial intelligence. We adapted edge AI to classify human emotions. Results show how edge AI-based emotion classification can greatly benefit in the field of cognitive assistants for the elderly or people living alone., This work was partly supported by the Generalitat Valenciana (PROMETEO/2018/002) and by the Spanish Government (RTI2018-095390-B-C31). Universitat Politecnica de Valencia Research Grant PAID-10-19.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Sub-Diffractive Acoustic Vortices by Nonlinear Mixing

  • Jimenez, Noe|||0000-0002-6539-670X
  • Ealo, Joao
  • Muelas-Hurtado, Rubén
  • Duclos, Aroune
  • Romero-García, Vicent
[EN] Vortex beams, characterized by a collimated wavefront with a phase dislocation at their principal axis, have found practical applications to construct acoustic tweezers for particle trapping and manipulation, or underwater communications. However, the natural diffraction of the wavefront limits the size of the vortex. This result in vortices whose bright core is larger than the wavelength, limiting their use for practical applications such as long-range underwater communications. In this work, we synthesize a vortex beam of sub-wavelength size at a distance beyond Rayleigh diffraction length using the nonlinear mixing of two confocal, high-frequency and detuned vortex beams of different topological charges. By using the nonlinear mixing of two confocal vortices, it was generated a low-frequency (1 kHz) focused vortex beam of integer topological charge whose distance between magnitude maxima is about 18 times smaller than its wavelength at a distance about 3 times the Rayleigh diffraction length. Sub-wavelength vortices emerge as a result of the spatiotemporal interference of two primary vortex beams due to the conservation of angular momentum during nonlinear wave-mixing. This mechanism opens new paths to design directive parametric antennas for vortex transceivers or particle manipulation systems at scales well below the diffraction limit., We acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities through grant Juan de la Cierva Incorporacion (IJC2018-037897-I) and PID2019-111436RB-C22, and by the Agencia Valenciana de la Innovacio through grants INNVAL10/19/016. This article is based upon work from COST Action DENORMS CA15125. JPG and VRG gratefully acknowledge projects ANR-RGC METARoom (ANR-18-CE08- 0021) and the HYPERMETA funded under the program Etoiles Montantes of the Region Pays de la Loire.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Towards a Dynamic Edge AI Framework applied to autonomous driving cars

  • Muratore, G.
  • Rincón Arango, Jaime Andrés
  • Greco, G.
  • Fortino, G.
  • Julian, Vicente|||0000-0002-2743-6037
  • Carrascosa Casamayor, Carlos|||0000-0003-3649-6530
[EN] This work proposes an innovative solution in the field of Edge AI in order to efficiently exploit new hardware components available on the market at low cost. Edge AI means that algorithms are processed locally on a hardware device. The algorithms use data (sensor data or signals) that are created on the own device. The idea of this paper focuses on demonstrating the validity of the proposed solution by implementing an autonomous driving system that exploits communication between intelligent agents. In this case, our self-driving cars are equipped with a low-cost device that allows you to recognise objects along the way and consequently take actions by running a machine learning model. The presence of a machine learning model also allows the developer to modify it by extending the flexibility and application possibilities of the proposed solution., This work was partly supported by: ERASMUS+ Programme, KA1 Istruzione Superiore, Carta Erasmus+: 29388-EPP-1-2014-1-IT-EPPKA3-ECHE, ACCORDO PER LA MOBILITÀ ERASMUS PER STUDIO - a.a. 2019/2020, Progetto n o 2019-1-IT02-KA103-061203 - CUP: H25J19000080006, Generalitat Valenciana (PROMETEO/2018/002). Universitat Politecnica de Valencia Research Grant PAID-10-19.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Theoretical model of a multi-layered polymer coated steel-strip ironing process using a neural network

  • Sellés, M.A.|||0000-0002-0784-5757
  • Sanchez-Caballero, Samuel|||0000-0001-5322-8082
  • Pérez Bernabeu, Elena|||0000-0002-9221-7623
  • Reig-Pérez, Miguel Jorge|||0000-0003-0226-1194
  • Segui Llinares, Vicente Jesús|||0000-0002-4043-2866
  • Schmid, S. R.
An alternative to the traditional can manufacturing process is to use plastic laminated rolled steels as base stocks. This material consist of pre-heated steel coils that are sandwiched between one or two sheets of polymer. The heated sheets are then immediately quenched, which yields a strong bond between the layers. Such polymer-coated steels were investigated by Jaworski [1,2] and Sellés [3], and found to be suitable for ironing with carefully controlled conditions. A novel multi-layer polymer coated steel has been developed for container applications. This material presents an interesting extension to previous research on polymer laminated steel in ironing, and offers several advantages over the previous material (Sellés [3]). This document shows a modelization for the ironing process (the most crucial step in can manufacturing) done by using a neural network. © (2012) Trans Tech Publications., This work was supported by the “Universitat Politècnica de València” [grant number PAID-06-10-003-305]
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A customizable open-source framework for measuring and equalizing e2e delays in shared video watching

  • Montagud, Mario
  • Cesar, Pablo
  • Boronat, Fernando|||0000-0001-5525-3441
[EN] Low-latency and media sync are essential requirements to enable interactive multi-party services, such as Social TV. In this work, we present an open-source and customizable framework that allows measuring end-to-end (e2e) video delays and provides support for different types of media sync, including Inter-Destination Media Sync (IDMS). This framework can be used by researchers to investigate the suitability of different techniques for optimizing the system performance in terms of e2e delays and media sync., This work has been funded, partially, by UPV under its R&D Support Program in PAID-01-10 Project and by CWI under EU/FP7 REVERIE Project (ICT-2011-7-287723).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Multi-touch-based assessment of hand mobility, dexterity and function. Preliminary study of validity, reliability and sensitivity to upper limb impairment severity in individuals with stroke.

  • Latorre, Jorge
  • Mollà-Casanova, Sara
  • Salinas, Bárbara
  • Colomer, Carolina
  • Borrego, Adrián|||0000-0001-5134-7811
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Llorens Rodríguez, Roberto|||0000-0002-8677-8707
[EN] Impairments of the upper limb function are among the most common and disabling sequelae after stroke, and their rehabilitation poses a major challenge for current physical and occupational therapy interventions. While restoration of certain degree of proximal and global movements and function is expected, the recovery of premorbid hand mobility and dexterity is less likely to occur. Although great efforts are usually made to rehabilitate these skills, with customized particular and analytic exercises, their assessment is rarely made with the same level of specificity. In general, hand and finger mobility and functionality are indirectly assessed in the clinic with standardized clinical scales and tests that require the use of these skills to perform some tasks. Although these scales are easy to administer, they can present poor accuracy, be biased, and do not allow for isolated assessment of joints and movements. Multi-touch technology enables interaction with electronic devices, such as smartphones and tablets, with on-screen finger touches. Although there is a very limited number of studies that investigate the potential of this technology to rehabilitate hand mobility and dexterity, the use of this technology for assessment of these skills remains unexplored. This study evaluates the feasibility of a multi-touch-based assessment tool (app) of hand mobility and dexterity in a sample of post-stroke survivors. Our results provide preliminary evidence that this technology can be used to design valid and reliable instruments for assessing hand mobility and dexterity that, in addition, are sensitive to the severity of the motor impairment of the upper limb after stroke, which could complement conventional clinical assessment., This study was partially funded by project VALORA, Fundació la Marató de la TV3 (grant 201701-10), grant BES-2014-068218 of the Ministerio de Economía y Competitividad of Spain, and grant Ayuda a Primeros Proyectos de Investigación (PAID-06-18), Vicerrectorado de Investigación, Innovación y Transferencia de la Universitat Politècnica de València, València, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Linear Propagation Properties for a 300 nm Film Height Silicon Nitride Photonic Integration Platform in the Optical Telecom C-band

  • Bru-Orgiles, Luis Alberto
  • Pérez-López, Daniel
  • Doménech, David
  • Sanchez, Ana M.
  • Cirera, Josep M.
  • Sanchez, Javier
  • Domínguez, Carlos
  • Mico-Cabanes, Gloria|||0000-0003-1812-5883
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
  • P. Muñoz|||0000-0001-6026-1649
[EN] In this paper we report on the characterization of the propagation loss, group index, dispersion, birefringence, and thermo-optic phase shift of Si 3 N 4 strip waveguides with guiding film height of 300 nm fabricated using low-preassure chemical vapour deposition, The authors acknowledge financial support through projects TEC2013-42332-P, TEC2015-69787-REDT PIC4TB, TEC2016-80385-P SINXPECT, TEC2014-54449-C3-1-R, GVA PROMETEO 2013/012, EC H2020-ICT-27-2015 CSA 687777 and IP 688519, FEDER UPVOV 10-3E-492 and 08- 3E-008. G.M. acknowledges BES-2014-068523. L.B. acknowledges PTA2015-11309-I
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A Novel Method to Decouple Temperature and Strain Using a Customized Femtosecond Laser-inscribed Superstructure Fiber Bragg Grating

  • Sanipatin-Urquizo, Bryan David|||0000-0003-4042-2286
  • Maldonado-Hurtado, Daniel Gustavo|||0000-0001-8585-0271
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] This paper introduces a novel technique to simultaneously measure temperature and strain using a single 5 mm femtosecond laser-inscribed superstructure FBG. Analyzing resonance distances, it allows distinguishing and complements the contributions of strain and temperature, improving measurements in sensing applications., This work is partially supported by the I+D+I projects SYNERGY PID2020-118310RB-I00 and INSTILL PID2020 120071RJ I00 funded by MCIN/AEI/10.13039/501100011033. Also, by the Generalitat Valenciana, the PROMETEO 2021/015 Research Excellency Award, the IDIFEDER/2020/032, as well as IDIFEDER/2021/050 GV A Infraestructura. D and PAID-10-22 de la Universitat Politècnica de València. Maldonado- Hurtado is supported by a scholarship PRE2018-085654, funded by MCIN/AEI/10.13039/501100011033, and ESF Investing in your future. . B. Sanipatin is supported by the Generalitat Valenciana, the PROMETEO 2021/015.
RIO. Repositorio Institucional Olavide
Publicación Contribución de congreso (ConferenceOutput)

Adaptive social force window planner with reinforcement learning

RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Sleep Disturbances in Nursing Home Residents: Links to Quality of Life and Daily Functioning

  • Concheiro-Moscoso, Patricia
  • Groba, Betania
  • Canosa, Nereida
[Abstract] The current study sought to determine the association of sleep with HRQOL and physical function among older nursing home residents. Participants were 37 older adults attending or residing in a semi-urban nursing-home facility in Galicia, Spain (70.3% cognitively normal, 29.7% cognitively impaired, aged 84.1±8.0, 81.1% women) who completed the Pittsburgh Sleep Quality Index (PSQI), the 5-level EuroQol-5D, a measure of HRQOL, and the International Classification of Functioning, Disability and Health (ICF) Core Sets for Sleep, a measure of physical functional. After adjustment for age, poor (PSQI score ≤ 14) and/or worse sleep quality (continuous PSQI score) was associated with several indices of lower HRQOL, including greater immobility (b = 0.19, p = 0.012) difficulty completing self-care (b = 0.23, p < 0.001) and daily activities (b = 0.18, p = 0.004), more severe anxiety/depression (b = 0.10, p = 0.042), and a lower overall health index (b = 0.06, p = 0.001). Further, poor/worse sleep quality was associated with several indices of functional impairment, including greater difficulty maintaining body position (b = 0.32, p = 0.004), walking (b = 0.17, p = 0.001), and moving around (b = 0.45, p = 0.009)., GERIA-TIC Project, Project co-funded by the Galician Innovation Agency (GAIN) through the Connect PEME Program (3rd edition) (IN852A 2016/10) and EU FEDER funds, Collaborative Genomic Data Integration Project (CICLOGEN). Data mining and molecular docking techniques for integrative data analysis in colon cancer. “Funded by the Ministry of Economy, Industry and Competitiveness. Galician Network of Research in Colorectal Cancer (REGICC) ED431D 2017/23, Galician Network of Medicines (REGID) ED431D 2017/16 funded by the Department of Culture Education and University Planning aids for the consolidation and structuring of competitive research units of the University System of Galicia of the Xunta de Galicia and Singular Centers (ED431G/01) endowed with FEDER funds of the EU
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Tackling Temporal Deontic Challenges with Equilibrium Logic

  • Soldà, Davide
  • Cabalar, Pedro
  • Ciabattoni, Agata
  • Neufeld, Emery
Trabajo presentado a: 24th International Conference on Autonomous Agents and Multiagent Systems (AAMAS 2025), Detroit, Michigan, USA, May 19 – 23, 2025., [Abstract]: Combining temporal reasoning with normative requirements presents significant challenges. In this paper, we tackle the most relevant challenges in the literature from a computational perspective, using Answer Set Programming (ASP). We integrate Temporal Equilibrium Logic, the foundation of Temporal ASP, with Deontic Equilibrium Logic with Explicit Negation, to reason about norms in a temporal context. Our approach is validated by: (i) addressing key benchmarks for temporal normative systems, providing (ii) a normal form reduction that enables the use of existing tools, and (iii) a polynomial LTL reduction for a relevant logic fragment., The project leading to this application has received funding from (i) the European Union’s Horizon 2020 research and innovation programme under grant agreement No 10.1034440, (ii) the Vienna Science and Technology funds (WWTF) projects 10.47379/ICT22- 023 and 10.47379/ICT23030, and (iii) the Spanish Ministry of Science, Innovation and Universities, grants PID2020-116201GB-I00 and PID2023-148531NB-I00., Austria. Vienna Science and Technology funds (WWTF); 10.47379/ICT22-023, Austria. Vienna Science and Technology funds (WWTF); 10.47379/ICT23030
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Feedback control of stochastic gene switches using PIDE models

  • Fernández, Christian
  • Faquir, Hamza
  • Pájaro Diéguez, Manuel
  • Otero-Muras, Irene
[Abstract]: Achieving control of gene regulatory circuits is one of the goals of synthetic biology, as a way to regulate cellular functions for useful purposes (in biomedical, environmental or industrial applications). The inherent stochastic nature of gene expression makes it challenging to control the behavior of gene regulatory networks, and increasing efforts are being devoted in the field to address different control problems. In this work, we combine the efficient modeling of stochastic gene regulatory networks by means of Partial Integro-Differential Equations with feedback control, in order to keep protein levels at the target (pre-defined) stationary probability distribution. In particular, we achieve the closedloop stabilization of bi-modal toggle-switches in the stochastic regime within the region of low probability (around the minimum located between the two modes of the uncontrolled system)., GAIN Oportunius Grant Xunta de Galicia
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Following Negationists on Twitter and Telegram: Application of NCD to the Analysis of Multiplatform Misinformation Dynamics

  • Paz, Alfonso de
  • Suárez Román, Manuel
  • Palmero Muñoz, Santiago
  • Degli Esposti, Sara
  • Arroyo Guardeño, David
Proceedings of the International Conference on Ubiquitous Computing & Ambient Intelligence (UCAmI 2022). Córdoba, 29 November 2022 through 02 December 2022., In this paper we present an analysis of misinformation cross-platform dynamics by focusing on communications published by COVID19 negationists on Twitter and Telegram. Previous research shows the need for better explanations of the way misinformation travels across platforms. Here we pay attention to communities of users vulnerable to negationism, which refers to the tendency to revise history in order to omit something that actually happened. We start from searching specific key words previously identified by experts and used by negationists in Telegram channels. We retain only those public Telegram channels where those keywords are used. Then, we search on Twitter for those users who reference those Telegram channels. This way we obtain a list of potential Twitter negationist accounts and correct for false positives. We use the normalised compression distance (NCD) technique to reduce this error, while performing authorship attribution. We extract images and news domains shared by Twitter negationist accounts identified with NCD and by Telegram accounts initially identified; then we perform a reverse image search to identify other Twitter accounts that have used those images. We search in Telegram where those news domains appear and extract those Telegram channels and compare them with the original channels identified. The procedure is semi-automatic to ensure human supervision as required by The Assessment List on Trustworthy Artificial Intelligence (ALTAI). As discussed in the end, results are promising and motivate further research about the use of NCD to automate the identification of accounts spreading misinformation., This research was funded by the projects (i) CYNAMON - Cybersecurity, Network Analysis and Monitoring for the Next Generation Internet” (funded by the Madrid Region under “Programas de Actividades de I+D entre grupos de investigación de la Comunidad de Madrid en tecnologías 2018” - P2018/TCS-4566; BOCM. No. 304; 21/12/2018) and (ii) XAI-DisInfodemics - eXplainable AI for disinformation and conspiracy detection during infodemics (Grant PLEC2021-007681 funded by MCIN/AEI/ 10.13039/501100011033 and by European Union NextGenerationEU/PRTR)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Biotechnological tools for the research and control of nodavirus in aquaculture

  • García-Álvarez, Miguel Ángel
  • Cervera, Laura
  • Valero, Yulema
  • González-Fernández, C.
  • Guardiola, F. A.
  • Arizcun, Marta
  • Chaves-Pozo, Elena
  • Esteban, M.A.
  • Cuesta, A.
Comunicación presentada al Aquaculture Europe 23, celebrado en Viena entre el 18 y el 23 de septiembre de 2023., Introduction. Nodavirus (NNV) is the most threatening marine virus in the Mediterranean area, and it is spreading in the number and type of viral isolates and host fish species, either wild or culture. In our research group we have been studying the immune response of fish against NNV for 2 decades, focusing on gilthead seabream and European sea bass models. While European sea bass is highly susceptible to some classical NNV genotypes the gilthead seabream acts as a resistant and reservoir species. However, their potential vertical transmission, the emergence of new natural NNV recombinants, producing high mortalities to traditionally-resistant species such as gilthead seabream, the climate change and the aquaculture diversification might increase the deleterious effects of NNV infection in the aquaculture sector. Based on this, we are now increasing our knowledge about fish-NNV interactions in the following topics: 1. Generation of biotechnological tools to study NNV and the fish immune response. We have developed several fish cell lines (from seabream, sea bass, European eel or Senegalese sole) susceptible to NNV, antibodies for localization studies and transcriptomic databases, useful as research and diagnostic tools. These tools allow us to increase their applications to other host, marine viruses or, even, other fields. 2. Deepening of the antiviral immune response of fish. We are identifying and characterizing, among others, the involvement of antimicrobial peptides (AMPs) and cell-mediated cytotoxicity as two of the most important antiviral immune mechanisms. Thus, we are able to analyze levels of antibodies and AMPs, or the adaptive cellular cytotoxic activity in fish, novel techniques that are routinely applied in our laboratory. 3. Effect of culture conditions and welfare on susceptibility to NNV. We are characterizing the lethality and presence of the virus in survivors and its success on vertical transmission under different culture conditions, size, or sex of different species susceptible to NNV. We have evidence that survival is more dependent on size than on culture conditions, but the presence of the virus in survivors is not. 4. Design and generation of treatments against NNV. We have developed several effective NNV vaccines in previous projects. We are currently developing the application of sea bass AMPs as antiviral treatments in aquaculture. So far, we have already shown that 4 AMPs derived from sea bass can be applied both as preventive and therapeutics of the disease produced by NNV in sea bass fingerlings. 5. Study of the impact of emerging contaminants on the antiviral immune response. We have evaluated the possible effect that some contaminants, mainly nanoplastics, may have on the immune response of fish and their resistance to NNV infections. Conclusions. In short, our group aims to investigate the fish health status and well-being with interests for the aquaculture sector. We mainly focus on the prevention and improvement of the resistance against nodavirus infections. To this end, we have generated various very interesting biotechnological tools that are exploited through material transfer agreements with research centers and companies, which clearly and decisively adhere to the objectives of the ThinkInAzul program, Funding. MCIN/AEI/10.13039/501100011033 (PID2019-105522GB-I00 to A.C.), FPI contract (PRE2020-093771 a L.C.), Juan de la Cierva-Incorporación contract (IJC2020-042733-I a Y.V. y JC2019-040510-I a C.G-F.), OWI TWO (cofunded by EMFF and IEO-CSIC), and the program ThinkInAzul (PRTR-C17.I1 to M.A.E. and E.C-P.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Monitorización de la variabilidad estructural en una mina activa: un enfoque multidisciplinar en tiempo casi real

  • Torné, Montserrat
  • Fernández, J.
  • Schimmel, Martin
  • Balaguera, S.
  • Du, S.
  • Escayo, Joaquin
  • Seivane, Helena
  • Díaz, Jordi
  • Martí, David
  • HU, Z.
  • Fernández, D.
  • Lopez, A.
  • Davoise, D.
En este trabajo se presenta dos proyectos de I+D+I pioneros en el sector minero, Minerva #smartgeocontrol y STONE, cuyo objetivo es el desarrollo e implementación de una plataforma de monitorización e interpretación multidisciplinar para aumentar la seguridad en los depósitos de residuos de la mina Riotinto. La plataforma integrará en tiempo real técnicas de monitorización geodésica y geotécnica clásicas, con técnicas innovadoras de satélite y sismología pasiva. Esta nueva plataforma web, originalmente diseñada para integrar datos de diferentes sensores, aún no ha sido implementada en ninguna mina en Europa. Los diferentes sensores que suministran datos, geodésicos (estaciones totales, sensores GNSS, ...), geotécnicos (piezómetros, inclinómetros, ...), ambientales y remotos, radar terrestre GB-SAR se conectarán a la plataforma y los datos obtenidos se mostrarán en tiempo real sobre un fondo geo-referenciado. Posteriormente, se integrarán con los resultados de las observaciones radar de satélite y ruido sísmico. Esto permitirá, de una forma muy intuitiva, interactuar con todos los sensores que están observando la mina. El principal objetivo de Atalaya Mining es llevar a cabo una transición digital innovadora hacia un control geodésico y geotécnico integral del entorno minero de Riotinto, favoreciendo la transición hacia la "minería inteligente", aumentando la seguridad de las estructuras y las personas en la operación minera., El proyecto STONE, con referencia CPP2021-009072, ha sido financiado por MCIN/AEI/10.13039/501100011033 (Ministerio de Ciencia e Innovación/Agencia Estatal de Innovación) y con fondos de la Unión Europea-Next Generation/PRTR (Plan de Recuperación, Transformación y Resiliencia)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Exploring the impact of physical oceanography on inter- and intra-stock connectivity of a highly commercial species in the Mediterranean Sea

  • Kerametsidis, Georgios
  • Hidalgo, Manuel
  • Stefano, Marine di
  • Mourre, Baptiste
  • Ser-Giacomi, Enrico
  • García, Encarnación
  • Vivas-Salvador, Miguel
  • Esteban, Antonio
  • Reglero, Patricia
  • Rossi, Vincent
Póster presentado a la ICES Annual Science Conference 2023, 11-14 septiembre de 2023, Bilbao (Session N), Marine organisms can disperse actively and passively. During early life stages, eggs and larvae of a plethora of taxa may be subject to transport over large distances by ocean currents, while adults often exhibit rather sedentary behaviors. Next generation stock assessment schemes broadly call for the need to include climate and oceanographic considerations, yet little progress has been made globally towards this direction. Red mullet Mullus barbatus is an important demersal resource in the Mediterranean with relatively long pelagic early-life stages suggesting a large dispersal potential. Here, we use two different putative stocks of red mullet in the Western Mediterranean Sea to test the effects of surface currents on the demography and inter- and intra-stock individual exchanges. The connectivity between spawning and nursery areas was investigated by simulating multi-annual lagrangian indices of larval retention, import, and self-recruitment. Our study demonstrates a certain degree of inter-stock connectivity along the main corridors of transport but also a substantial variability with some years when population sub-units appear to be more isolated. Regarding intra-stock metrics, we found that the main persistent spawning area of the Northern Spanish Coast stock may act as an export of individuals ending up in coastal nursery areas further south within or even outside the boundaries of the stock unit. By evaluating the passive dispersal and its impact on the spatial population structure and the intra-stock spatial dynamism of an exploited resource, our study provides insights to improve fisheries management with the incorporation of information on physical oceanography (from observing systems and operational models). Importantly, our methodology may readily be applied to other systems and/or be combined with additional methods (e.g., chemical, molecular or artificial markers) to facilitate the improvement of current management schemes and inform conservation strategies., Grant PRE2020-094321 funded by MCIN/AEI/ 10.13039/501100011033 and, as appropriate, by “ESF Investing in your future” or by “European Union NextGenerationEU/PRTR”. PID2019-110282RA-I00 funded by MCIN/AEI/ 10.13039/501100011033
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Alteration processes in Deception Island volcano (Antarctica), a first step in the study of the current hydrothermalsystem

  • Vilanova, Oriol
  • Geyer, Adelina
  • Aulinas, Meritxell
  • Arasanz, Raquel
  • Ibáñez Insa, Jordi
  • Álvarez-Valero, Antonio M.
  • Albert, Helena
  • Prieto-Ballesteros, Olga
Progressive hydrothermal alteration and mineral precipitation can modify the physical properties and mechanical behavior of the affected rocks, increasing the probabilities of phreatic or hydrothermal explosive eruptions. In this work we focus on the study of rock alteration and hydrothermal system of Deception Island, which is one of the most active volcanoes in Antarctica. A characterization of the pre-caldera and syn- caldera rock alterations has been done as a starting point for the understanding of the past and present hydrothermal system in the island. The alteration processes that have affected pre-caldera deposits are related to low temperature (<200 oC) fluids, with pervasive palagonitisation and precipitation of smectite and zeolite. In some samples carbonate has also been detected. This alteration is consistent with rocks located at the first 500-600 meters depth of the pre-caldera shield volcano, in which the upper part of the sequence was affected by low-temperature acidic hydrothermal fluids that would have caused the dissolution of some phenocrysts and the consequent precipitation of magnesite. An extended palagonitisation characterize the syn-caldera deposits, but smectite and zeolite have also been identified. This is consistent with syn-depositional and meteoric alteration. Therefore, in the studied samples there is no evidence of persistent hydrothermal alteration that could be related to the current hydrothermal system., This work is part of the CSIC Interdisciplinary Thematic Platform (PTI) Polar zone Observatory (PTI-POLARCSIC) activities. This research was partially funded by the MINECO VOLCLIMA (CGL2015-72629-EXP) and HYDROCAL (PID2020-114876GB-I00) MCIN/AEI/10.13039/501100011033 research projects. This research is also supported by the PREDOCS-UB grant. IUGG23-1061, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Composition and textural tephra characteristics of the 1970 eruption at Deception Island (Antarctica): Implications for volcanic hazards.

  • Hopfenblatt, Joaquin
  • Geyer, Adelina
  • Aulinas, Meritxell
  • Polo-Sánchez, Antonio
  • Pedrazzi, Dario
  • Álvarez-Valero, Antonio M.
  • Vilanova, Oriol
  • Pallars, R.
  • Casas, J.M.
Deception Island is the most active volcano in the South Shetland Islands with more than 20 explosive eruptions registered over the past centuries. The latest event (1970) was severely violent with a volcanic explosivity index (VEI) of 3. The column height reached 10 km, the estimated bulk eruptive volume was > 0.1 km3 and tephra fallout was reported as far as in King George Island (> 150 km distance). In this work, we perform a compositional and textural analysis of the 1970 tephra layers found at Livingston Island¿s glaciers. Results obtained are compared to the in situ pyroclastic deposits of the active vents during the eruption. The objective is to establish a correlation between the eruptive phases occurred during the 1970 event and the physicochemical features observed in the tephra deposits. This will be used the onset of future studies of tephra layers found in glaciers and marine/lacustrine sediment cores outside the island, improving our capacity to reconstruct the eruptive dynamics of past eruptions. This is fundamental to: (i) determine the size and explosiveness of past eruptions; (ii) assess the extent of their related hazards; (iii) complete the eruptive record; and (iv) consequently, perform accurate hazard assessments at the island., This work is part of the CSIC Interdisciplinary Thematic Platform (PTI) Polar zone Observatory (PTI-POLARCSIC) activities. This research was partially funded by the MINECO VOLCLIMA (CGL2015-72629-EXP) and HYDROCAL (PID2020-114876GB-I00) MCIN/AEI/10.13039/501100011033 research projects. Sampling was founded by CICYT (ANT91-1270, ANT93-0852 and ANT96-0734)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Sulfide undersaturated melts at the ultraslow spreading Gakkel ridge in the Arctic Ocean

  • Richter, Marianne
  • Nebel, Oliver
  • Park, Jung-Woo
  • Dottin III, James
  • Tomkins, Andrew
  • Keays, Reid R.
  • Farquhar, James
  • Dick, Henry J. B.
Comunicación oral presentada en Goldschmidt Conference 2023. 9-14 july, Lyon (France), Ocean floor lavas from fast spreading ridges are considered to be S-saturated [1,2]. Sulfide saturation in mantle-derived melts is dependent on partial melting reactions, pressure, temperature and chemistry of the mantle source [3] and has long been proposed to be affected by magmatic differentiation. A recent study showed that primitive basalts from a fast-spreading ridge leave the mantle sulfide saturated but enter the magma chamber below the ridge sulfide undersaturated through pressure loss [4]. Here, we test this hypothesis for ultra-slow spreading ridges by determining platinum-group element (PGE) concentrations and S-isotopes from sixteen basalts from the ultraslow spreading Gakkel Ridge ranging MgO from 9.4 to 6.6 wt.%. The data are combined with existing trace element concentration and Fe isotope data to further constrain magmatic evolution. Our data show that the concentration of PGE in near-primitive melt increases until MgO=8.5 wt.% and then decreases, coincidental with a sharp drop in Cu concentration. Primitive melts above the MgO threshold of 8.5 wt.% are sulfide undersaturated with the increase in PGE concentration possibly attributed to dissolution of mantle monosulfides en route to the surface. More evolved erupting lavas reached S saturation, likely through S incubation in a magma chamber, which is monitored by the segregation of Cu-sulfide phases at S saturation. Our results confirm that primitive magmas leave the mantle S saturated and become S undersaturated en route to surface. At the ultraslow spreading ridges, sulfide saturation through magmatic differentiation occurs at lower MgO compared to fast spreading ridges, proving the existence of at least small magmatic reservoirs in these settings. [1] Ding & Dasgupta 2017, EPSL, 459, 183-195. [2] Ding & Dasgupta, 2018, JPet, 59(7), 1281-1308. [3] Mavrogenes and O¿Neill, 1999, GCA, 63(7-8), 1173-1180. [4] Hao et al. 2021, EPSL, 553, 116603. Juan de la Cierva Fellowship (FJC2021-047355-I), funded by MCIN/AEI/10.13039/501100011033, “Juan de la Cierva” Fellowship (FJC2021-047355-I), funded by MCIN/AEI/10.13039/501100011033
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Revising Tatra Mountains crystalline basement: microstructural and geochronological insights into the Variscan assembly

  • Bukała, Michal
  • Barnes, Christopher J.
  • Mikołajczak, Mateusz
  • Bazarnik, Jakub
  • Mazur, Stanisław
  • Majka, Jarosław
Póster presentado en 19th Central European Tectonic Studies Group Meeting, 12-16 April, 2023 Hungría, Research funded by the National Science Centre, Poland, project no. 2021/43/B/ST10/02312. It was supported by the Foundation for Polish Science stipend, and “Juan de la Cierva” Fellowship (JFJC2021-047505-I) funded by MCIN/AEI/10.13039/501100011033, ESF (European Social Fund) and CSIC (M.Bukała). We also acknowledge the Tatra National Park for help and permission to conduct fieldwork
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Petrothermal and petrophysical characterization of alluvial fan, fluvial fan and lacustrine Paleogene sediments of the Ebro Foreland Basin, South Pyrenean fold and thrust belt.

  • Cruset, David
  • Ramírez-Pérez, Pedro
  • Onetti, Ernest
  • Ibáñez Insa, Jordi
  • Vergés Masip, Jaume
  • Saez, A.
  • Sizun, J. P.
  • Cantarero, Irene
  • Travé, Anna
We analysed the petrothermal and petrophysical properties of the Upper Eocene alluvial fan, fluvial fan and lacustrine deposits in the NE Ebro Foreland Basin, South Pyrenean fold belt. The proximal facies located in the Oliana anticline consist of marine marls, transitional sulphates and non-marine alluvial sandstones and conglomerates. Distally, fluvial fan facies of the Sanaüja anticline, comprise channelled and crevasse splay tabular sandstones and clays interbedded with shallow lacustrine facies. Lacustrine deposits comprise channelled and mouth bar tabular deltaic sandstones, offshore carbonates and playa-lake gypsum and clays. Thermal conductivity measurements reveal low values from 1.818 to 3.232 Wm-1K-1 for the carbonates and sulphates, as well as high values from 2.831 to 3.736 Wm-1K-1 for the distal sandstones and conglomerates. The connected porosity of proximal alluvial conglomerates and sandstones range from 1.90 to 3.73% and 0.74 and 22.42%, respectively, with 64.52% of the values ranging from 0.42 to 5.25%. In contrast, distal fluvial fan and lacustrine sandstones have higher overall porosities from 3.16 to 18.02%, with 68.96% of the values between 6 and 12%. Sulphates and carbonates have porosities from 0.42 to 20%. Mineral density of the samples ranges from 2.310 to 2.409 g/cm3 for sulphates, from 2.682 to 2.753 g/cm3 for carbonates and from 2.618 to 2.783 g/cm3 for conglomerates and sandstones. Velocities of compressional acoustic waves range from 2236 to 6322 ms-1, showing a negative correlation with connected porosity values. Contrarily, no correlation is observed between connected porosity and thermal conductivity of the studied rocks. This finding is in contrast to the results of previous authors observations, which reported that these properties are negatively correlated. This research was funded by the project ALORBE (PIE-CSIC-202030E310), DGICYT Spanish Project PID2021-122467NB-C22, the Grups de Recerca reconeguts per la Generalitat de Catalunya ¿Modelització Geodinàmica de la Litosfera¿ (2021 SGR 00410) and ¿Geologia Sedimentària¿ (2021 SGR-Cat 00349) and MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR (Juan de la Cierva Formación fellowship FJC2020-043488-I)., This research was funded by the project ALORBE (PIE-CSIC-202030E310), DGICYT Spanish Project PID2021-122467NB-C22, the Grups de Recerca reconeguts per la Generalitat de Catalunya “Modelització Geodinàmica de la Litosfera” (2021 SGR 00410) and ”Geologia Sedimentària” (2021 SGR-Cat 00349) and MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/PRTR (Juan de la Cierva Formación fellowship FJC2020-043488-I).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Magnetic fabrics in sedimentary Permian red beds in the Cadí basin (Southern Pyrenees), Fábricas magnéticas en rocas sedimentarias del Pérmico de la cuenca del Cadí (Pirineos Orientales)

  • Simón-Muzás, Ana
  • Casas-Sainz, Antonio M.
  • Soto, Ruth
  • Pueyo Morer, Emilio Luis
  • Beamud, Elisabet
  • Gisbert, Josep
  • Oliva-Urcia, Belén
In the Cadí basin (southern Pyrenees) a magnetic fabrics study has been carried out in detrital continental sediments from the Permian Lower Red and Upper Red Units (20 sites) in red siltstones, shales and medium-coarse grain sandstones, obtaining cylinders and oriented fragments. The magnetic foliation is parallel to the bedding plane. The maximum susceptibility axis, K1, is arranged in two subhorizontal maxima after tectonic correction: 1) with N-S direction and 2) with E-W direction. The palaeocurrents are arranged from an E-W to a WNW-ESE direction, thus indicating both sedimentary and tectonic conditionings., Se ha llevado a cabo en la cuenca del Cadí (Pirineos Orientales) un estudio de fábricas magnéticas en los sedimentos detríticos continentales de las unidades pérmicas Roja Inferior y Roja Superior (20 estaciones) en limolitas, lutitas y areniscas de grano medio-grueso extrayendo cilindros y fragmentos orientados. La foliación magnética es paralela al plano de estratificación. El eje de máxima susceptibilidad K1 se dispone en dos máximos subhorizontales tras la corrección tectónica: 1) con dirección N-S y 2) con dirección E-W. Las paleocorrientes se disponen en un abanico desde el E-W hasta el WNW-ESE. Se interpreta que las direcciones de la lineación magnética podrían estar condicionadas tanto por la sedimentación como por la tectónica., El presente trabajo ha sido financiado por los proyectos y ayudas a la investigación PID2020-114273GB-C22, PID2019-108753GB-C22, FPU19/02353, y MCIN/AEI/10.13039/501100011033, “ERDF Away of making Europe” y “ESF Investing in your future”. EB agradece a GGAC 2021 SGR00076 (AGAUR) y el Institut de Recerca Geomodels UB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Analysis of seismic noise sources in an open pit mining environment

  • Díaz, Jordi
  • Torné, Montserrat
  • Schimmel, Martin
  • Rodríguez, Susana
  • Martí, David
  • Ruiz, M.
  • Seivane, Helena
  • Sánchez-Pastor, Pilar
  • Davoise, D.
We present the characterization of the seismic ambient noise wavefield in the open-pit Riotinto mine (southern Spain), in the mainframe of a collaborative research project aiming to use the ambient noise wave field to monitor structural subsurface changes in near real-time. Noise characterization is based on a dense seismic network of 30 stations located along a 1-km long segment of a tailings dam. We first describe the most frequent transient signals detected, including local and distant earthquakes, blasting, and vehicles. The time variations in the amplitude of the 10-40 Hz frequency band are then used to define three phases of activity during the recording period. The highest amplitudes are directly related to the regrowth of the dam wall carried out to properly store the constantly increasing amount of tailings. In the third phase, the seismic noise is dominated by the deposition of tailings into the deposit, allowing the use of seismic data to monitor in detail the evolution of the deposition process. The detailed knowledge of the sources of noise in the Riotinto mine provides the basis for developing ambient noise seismic interferometry methods to monitor the physical properties of the subsurface of this and other open-pit mining areas., This research is part of the R+D+I project CPP2021 009072 funded by MCIN/AEI/10.13039/501100011033 (Ministry of Science, Innovation and Universities/State Innovation Agency) with funds from the European Union Next Generation/PRTR (Recovery, Transformation, and Resilience Plan).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

CatVolc: A new database of geochemical and geochronological data of volcanic-related materials from the Catalan Volcanic Zone (Spain)

  • Geyer, Adelina
  • Miranda-Muruzábal, Martin
  • Aulinas, Meritxell
  • Albert, Helena
  • Vila, Miquel
  • Micheo, Fus
  • Bolós, Xavier
  • Pedrazzi, Dario
  • Gisbert, Guillem
  • Planagumà, Llorenç
The Catalan Volcanic Zone (CVZ) in northeastern Spain constitutes an intraplate alkaline volcanic region linked to the opening of the Western Mediterranean and the development of the European Rift System. Volcanic activity in the CVZ started in the L¿Empordà area (ca. > 12 - 8 Ma), extended to La Selva (7.9 - 1.7 Ma), and finally migrated to the Garrotxa Volcanic Field (< 0.7 - 0.01Ma). Despite ongoing scientific interest in the CVZ dating back to the early 19th century, certain aspects remain insufficiently defined. These include a comprehensive understanding of the spatial and temporal evolution of the magma plumbing system(s) and ascent mechanisms, as well as the chronology of volcanism across the CVZ. Unraveling these unresolved questions requires geochemical, petrological, and geochronological data, which, in the case of the CVZ, are scattered and have never been integrated or analysed within a unified framework. This study introduces the CatVolc (Catalan Volcanism) database, consolidating existing geochemical and geochronological data of volcanic-related materials within the CVZ. The current version of the database incorporates geochemical analyses from 405 rock samples (296 juvenile magmatic rocks -including lavas and pyroclasts- and 109 xenoliths), and radiometric/thermoluminescence dating data from 57 rocks (55 volcanogenic and two dykes), 4 paleosols samples developed between volcanic deposits and 1 sample from sediments. Each entry in the CatVolc database provides general information about the sampling site, sample lithology, whole-rock analyses (including major and trace elements), isotopic ratios, mineral chemistry, and radiometric/thermoluminescence dating details, if available. An initial analysis of the information contained in the CatVolc database highlights the critical limitations of the current state of knowledge and allows suggesting potential future directions for volcanic-driven investigations in the CVZ. Furthermore, the outcomes affirm the CatVolc database as an essential tool for understanding the spatial and temporal evolution of magmatic systems and volcanic activity in the CVZ, particularly within the Garrotxa Volcanic Field. This validation is crucial for advancing the assessment of volcanic hazards in the region and gaining a comprehensive understanding of future volcanic activity., This work has been developed under the financial support of the Institut Cartogràfic i Geològic de Catalunya (ICGC), the Parc Natural de la Zona Volcànica de La Garrotxa (PNZVG), the Fundación General CSIC's ComFuturo programme and the Marie Sk¿odowska-Curie grant agreement No. 101034263, the collaboration grant 2021 COLAB 00367 funded by the MEFP, and the grant PID2022-139047NA-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by ¿ERDF A way of making Europe¿.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Imaging the crustal structure of the Central Pyrenees using Seismic Interferometry

  • Soto, Ruth
  • Andrés, Juvenal
  • Gabàs, Anna
  • Bellmunt, Fabian
  • Macau, Albert
  • Clariana, Pilar
  • Rey-Moral, Carmen
  • Rubio Sánchez-Aguililla, Félix Manuel
  • Izquierdo Llavall, Esther
  • Mochales López, Tania
  • Pueyo Morer, Emilio Luis
  • Ayala, C.
The Pyrenees constitute a natural laboratory where hundreds of geological and geophysical data have been acquired during the last decades. It represents a roughly E-W oriented doubly vergent orogen formed during the Alpine Orogeny. Deep seismic reflection data obtained during the 80s revealed its crustal architecture that resulted from the subduction of the Iberian plate under the European lithosphere at its central part. In this work we applied seismic interferometry to the same passive dataset through two different techniques aiming to construct two independent images of the Central Pyrenean lithosphere, to enhance the current knowledge of the area. The main objectives are to compare them and correlate the obtained results with previous data. Data were acquired within the IMAGYN project along a NE-SW 70 km-long profile extending from the Southern Pyrenees (Pedraforca and Cadí Units, northern Iberia) to the northern part of the Axial Zone, close to Ax-les-Thermes (France). Data came from three to five months of continuous recording from an almost linear array of 43 seismic stations (being 17 and 26 broadband and short-period stations, respectively). The two applied techniques are (1) the global-phase seismic interferometry (GloPSI), using continuous recordings of teleseismic (30¿ < epicentral distance < 95¿) and global earthquakes (> 120¿ epicentral distance), and (2) the use of continuous ambient seismic noise recordings through autocorrelation. Despite both methods rely on different energy sources, they are complementary and use static receivers. In the first method (GloPSI), we extracted global phases (PKP, PKiKP and PKIKP) and their reverberations within the lithosphere. The selected phases were autocorrelated and stacked to construct a high-resolution pseudo zero-offset reflection image. The second approach provided an approximation to the zero-offset reflection response of a single station. Results reveal features that can be correlated in both reflection images. The crust-mantle boundary is mapped as a relative flat interface at approximately 35-40 km depth. Crustal interfaces detected at 15 and 25 km depth can be related to the Conrad discontinuity and other compositional changes within the crust., This work is part of the project ¿High-resolution imaging of the crustal-scale structure of the Central Pyrenees and role of Variscan inheritance on its geodynamic evolution¿ (IMAGYN), PID2020-114273GB-C22 funded by MCIN/AEI/10.13039/501100011033
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Prediction of Subsurface Physical Properties Through Machine Learning: The case of the Riotinto Mine

  • Balaguera, Abraham
  • Sánchez-Pastor, Pilar
  • Du, Sen
  • Torné, Montserrat
  • Schimmel, Martin
  • Fernández, José
  • Díaz, Jordi
  • Vergés Masip, Jaume
  • Carbonell, Ramón
  • Rodriguez, Susana
  • Davoise, D.
Recently, under the umbrella of a public-private collaboration project (CPP2021-009072), Atalaya Riotinto Minera S-L. and the CSIC through its institutes IGEO-Madrid and Geo3BCN-Barcelona, have undertaken an ambitious and innovative initiative to validate the applicability of state-of-the-art monitoring and prospecting systems for better tracking of deformations that may occur in the mine¿s environment and to study the petrophysical properties and 3D structure of the mine subsurface. In this work, we present the results of machine learning (ML) models developed to predict various physical properties of rock (PPR) for classifying main lithologies. This analysis is based on over a thousand surface rock samples and nine wells with lithology descriptions and density logs. These data sets have allowed us to characterize the main geological units and formations comprising the subsurface of the Riotinto (RT) mine. A quality control process was applied to the PPR database through lithology and intervals to identify and correct outlier values. Multi-Layer Perceptron neural networks were employed to predict these outliers. Various mathematical and supervised machine learning models were developed to understand and predict PPR associated with different geological units. The models were compared to identify the most efficient and stable one. Additionally, new machine learning models were implemented to predict lithofacies based on PPR. These models were then used to predict PPR and classify lithofacies in wells within a mining site. The results suggest that machine learning-based PPR prediction reduces uncertainty, providing a clearer understanding of the anisotropic characteristics of geological units. Apparent density, total porosity, and P-wave velocity properties were found to predict lithofacies with an accuracy of approximately 80%. In conclusion, this advancement not only redefines the precision with which lithofacies can be identified in the Riotinto mine but also establishes a new methodology for the lithological characterization of the subsurface, leveraging both well logs and direct measurements on surface samples. This study demonstrates the potential of using new ML techniques in mining and geology, as well as opening the door to the use of these models for 3D characterization of lithological units by integrating geophysical data at the exploratory level., This work, financed with reference CPP2021 009072, has been funded by MCIN/AEI/10.13039/501100011033 (Ministry of Science, Innovation and Universities/State Innovation Agency) with funds from the European Union Next Generation/PRTR (Recovery, Transformation, and Resilience Plan).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Examining the behaviour of Sr and 40Ar in white mica in response to deformation and fluid-mediated chemical exchange

  • Barnes, Christopher J.
  • Zack, Thomas
  • Gerdes, Axel
  • Dubosq, Renelle
  • Camacho, Alfredo
  • Bukała, Michał
Comunicación oral presentada en EGU Genral Assembly 2024, Vienna, Austria & Online | 14–19 April 2024, A schist and a marble are used to investigate 40Ar and Sr behaviour in white mica that show distinct records of deformation and fluid-mediated chemical exchange. The rocks were obtained from the upper level of the Middle Allochthon in the northern Scandinavian Caledonides. They underwent eclogite-facies metamorphism (2.4-2.6 GPa/590-660°C) at c. 486-481 Ma and were deformed during juxtaposition with the overlying Upper Allochthon in lower amphibolite/greenschist facies conditions at c. 430-420 Ma. Deformation of the schist is recorded by anastomosing shear bands that delimit polymineralic lenses of white mica, quartz, garnet, and apatite. White mica are only locally deformed along shear bands but show irregular zoning indicative of dissolution-reprecipitation, with high-celadonite zones (XCel: 0.22) generally enveloped by low-celadonite zones (XCel: 0.09). Fluid activity during rock deformation is evinced by the presence of chlorite in shear bands and surrounding partially retrogressed garnet, as well as dissolution-reprecipitation of plagioclase. Mobilization of trace elements is evident, with low-celadonite zones enriched in V, Sr, Nb, Ba and depleted in Li, Ti, Co, Zn relative to high-celadonite zones. The former also shows slight enrichment of average B (35.9 µg/g) compared to the latter (27.2 µg/g), but ¿11B values are the same for both zones (-13.5 and -13.6 ¿), suggesting locally-derived fluids. Deformation and foliation development of the marble is characterized by shape preferred orientation of calcite and white mica. The mica show variable grain size and are all deformed, highlighted by electron channeling contrast imaging that reveals abundant µm-scale kink bands within individual grains, a feature that is significantly less apparent in the schist mica. The marble mica show uniform high-celadonite content (XCel: 0.28), representing preservation of high-pressure mica chemistry during deformation. They show no trace element variations, except for a decrease B content with ¿11B values (36.3 µg/g and -18.1 ¿ to 15.5 µg/g and -22.0 ¿), which may be explained by heterogeneous devolatilization and preferential loss of 11B during high-grade metamorphism. Thus, it is evident the mica remained closed to chemical exchange during deformation. The white mica 40Ar/39Ar dates from the schist are dispersed (491 ± 4 Ma to 427 ± 4 Ma), with the older dates typically provided by high-celadonite zones, and vice versa. The marble mica yielded a similar range of dates (486 ± 4 Ma to 428 ± 4 Ma), with finer-grains yielding younger dates. Weighted averages of single-spot Rb/Sr dates show a similar pattern for the schist (high-celadonite: 485 ± 8 Ma; low-celadonite: 427 ± 15 Ma). However, Rb/Sr dates from the marble mica only reproduce the older population of dates (481 ± 4 Ma) regardless of grain size. These results demonstrate that loss of 40Ar from white mica can be facilitated by either fluid-mediated chemical exchange or deformation, but re-equilibration of Sr isotopes to reset Rb/Sr dates requires fluid-driven processes in lower amphibolite/upper greenschist facies conditions., Research funded by NCN grant no. UMO-2021/40/C/ST10/00264 (C.J. Barnes), supported by “Juan de la Cierva” Fellowship JFJC2021-047505-I by MCIN/AEI/10.13039/501100011033 and CSIC (M. Bukała)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Decoupled behaviour of 40Ar and 87Sr/86Sr during deformation of metamorphic white mica in a high-pressure marble

  • Barnes, C. J.
  • Zack, Thomas
  • Bukała, Michał
  • Dubosq, Renelle
  • Camacho, A.
  • Gerdes, A.
  • Rösel, Delia
Comunicación oral presentada en 4th European Mineralogical Conference 2024, held at Trinity College Dublin on 18–23 August 2024., Research funded by NCN grant no. UMO-2021/40/C/ST10/00264 (C.J. Barnes), supported by “Juan de la Cierva” Fellowship JFJC2021-047505-I by MCIN/AEI/10.13039/501100011033 and CSIC (M.Bukała)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

High-pressure metasomatism and carbonation of metaserpentinites during deformation at the subduction interface

  • López Sánchez-Vizcaíno, Vicente
  • Padrón-Navarta, José Alberto
  • Menzel, Manuel D.
  • Jabaloy, Antonio
  • Garrido, Carlos J.
Comunicación oral presentada en 5th Serpentinedays 2024, 23 – 25 September 2024, Granada, Spain, Research funded by RUSTED project PID2022-136471N-B-C21 & C22 funded by MICIN/AEI/10.13039/5
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Hydrogen in orthopyroxene records oxidation during hydration of the cold mantle wedge

  • Ramón-Fernández, María
  • Padrón-Navarta, José Alberto
  • Garrido, Carlos J.
  • Boudier, Françoise
Póster presentado en 5th SerpentineDays 2024, 23 – 25 September 2024, Granada, Spain, Research funded by RUSTED project PID2022-136471N-B-C21 & C22 funded by MICIN/AEI/10.13039/501100011033
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Metaserpentinites sequester sediment-derived methane and CO2 in subduction zones via redox-driven carbonate precipitation

  • Bukała, Michał
  • Padrón-Navarta, José Alberto
  • Menzel, Manuel D.
  • López Sánchez-Vizcaíno, Vicente
  • Garrido, Carlos J.
Comunicación oral presentada en 5th Serpentinedays 2024, 23 – 25 September 2024, Granada, Spain., RUSTED project PID2022-136471N-B-C21 & C22 funded by MICIN/AEI/10.13039/501100011033 and FEDER program, and “Juan de la Cierva” Fellowship JFJC2021-047505-I
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

On the potential role of reactive flow precipitation due to fluid-pressure gradients for the genesis of olivine veins in subducted metaserpentinite

  • Padrón-Navarta, José Alberto
  • Jabaloy, Antonio
  • López Sánchez-Vizcaíno, Vicente
  • Gómez-Pugnaire, M. T.
  • Hidas, Károly
  • Garrido, Carlos J.
Comunicación oral presentada en EGU General Assembly 2022, Vienna, Austria, 23–27 May 2022, This work is part of the project DESTINE (PID2019-105192GB-I00) funded by MICIN/AEI/10.13039/501100011033 and the FEDER program “Una manera de hacer Europa”. J.A.P.N. acknowledges a Ramón y Cajal contract (RYC2018-024363-I) funded by 452MICIN/AEI/10.13039/501100011033 and the FSE program “FSE invierte en tu futuro”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Application of Machine Learning and Gravimetric Inversion Techniques for 1D and 3D Geomechanical Characterization of Culm Group Slates in the Iberian Pyrite Belt

  • Balaguera, Abraham
  • Jurado, Maria José
  • Sánchez-Pastor, Pilar
  • Schimmel, Martin
  • Vergés Masip, Jaume
  • Diaz, J.
  • Rodriguez, Susana
  • Carbonell, Ramón
  • Torné, Montserrat
En los últimos años, la creciente necesidad de obtención de recursos minerales ha llevado a la industria minera a desarrollar técnicas más precisas para comprender de forma integral las propiedades del subsuelo, especialmente en entornos geológicos complejos como el de la Mina de Riotinto (RTM) en la Faja Pirítica Ibérica. Este estudio se centra en la caracterización de las propiedades geomecánicas, tanto en 1D como en 3D, de rocas de baja porosidad y baja permeabilidad asociadas al grupo litológico Culm de edad Carbonífera, que sirven de sustrato para los depósitos de desmonte de las actividades extractivas de la mina. Se utilizan registros de sondeos de exploración, técnicas de inversión gravimétrica y modelos de Machine Learning (ML) para distinguir las variaciones verticales y laterales de los parámetros de las rocas, específicamente en el flanco sur de la RTM. Se implementa un riguroso control de calidad de los registros de sondeo adquiridos, y se estiman registros de densidad aparente utilizando relaciones ML a partir de datos de superficie, calibrados posteriormente con datos de laboratorio. Esta metodología permite obtener los parámetros geomecánicos necesarios para caracterizar en 1D tres subunidades litológicas principales, que presentan valores petrofísicos contrastantes. Al combinar estas subunidades con datos de imágenes ultrasónicas de pozos y modelos de inversión gravimétrica, se logró una continuidad lateral, generando una visualización 3D multiparamétrica del área de estudio a una profundidad de 500 metros. Este estudio demuestra que el subsuelo del área exhibe parámetros geomecánicos con alto contraste en sus propiedades físicas, notablemente reflejados en los datos de pozos y, en menor medida, en los observables geofísicos. Esto establece una nueva metodología con mayor alcance de profundidad para la caracterización del subsuelo con fines geotécnicos. Adicionalmente, demuestra el potencial de utilizar técnicas de ML para resolver incertidumbres geológicas en distritos mineros, abriendo la puerta al uso de estos modelos para la caracterización tridimensional de unidades litológicas mediante la integración de datos geofísicos para la exploración minera., Este trabajo, financiado con referencia CPP2021 009072, ha sido financiado por MCIN/AEI/10.13039/501100011033 (Ministerio de Ciencia, Innovación y Universidades/Agencia Estatal de Innovación) con fondos del Next Generation/PRTR (Plan de Recuperación, Transformación y Resiliencia) de la Unión Europea., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

3D Modeling, Stochastic Joint Gravity-Magnetic Inversion, and ML for Anomalous Zone Identification in a Mining Context

  • Balaguera, Abraham
  • Torné, Montserrat
  • Carbonell, Ramón
  • Sánchez-Pastor, Pilar
  • Vergés Masip, Jaume
  • Rodriguez, Susana
  • Davoise, D.
This study proposes an integrated subsurface data methodology to identify zones with mineralization potential in mining contexts, focusing on detecting geological targets based on their geophysical properties. The case study encompasses an area of 400 km² around the Riotinto mine in the Iberian Pyrite Belt (southern Spain), a region internationally recognized for its significant accumulations of massive sulfides deposits. Our methodology integrates stochastic geological models derived from detailed mapping with a joint probabilistic inversion of gravity and magnetic data. Bouguer and magnetic anomaly digital maps are used to generate probabilistic density volumes of the target area. Additionally, petrophysical data from over a thousand rock samples were analyzed and used to construct predictive models of P-wave velocity and, total porosity using advanced Machine Learning (ML) techniques. The generated 3D models reveal the geometry of the main rock units. Geo-bodies can be differentiated within the multiparametric volume. These are characterized by high values for density and P-wave velocity, and low values for porosity. These rock units are key parameters for identifying mineralized structures. However, the available data on physical properties reveals an overlap between different lithologies and mineralized ore bodies which hinders the accurate discrimination of the latter. The models illustrate the presence of anomalous rock bodies, including mafic rocks located at shallow structural positions, and highly compacted slates at depths greater than 1250 m. These feature significant contrasts in their physical property values that could lead to false exploration targets. Considering this, we were able to establish a classification and prioritization system for zones based on their probability of containing mineralized bodies, identifying areas with greater potential of hosting ore structures in specific geological units. Finally, it is proposed to continue evaluating the applicability and effectiveness of this methodology in other geological and ore bearing settings, promoting its replicability and, aiding the development of more precise, efficient, and sustainable exploration techniques, aligned with the growing demand for strategic minerals necessary for a responsible energy transition., This work, funded under reference CPP2021 009072, has been supported by MCIN/AEI/10.13039/501100011033 (Ministry of Science, Innovation, and Universities/State Agency for Innovation) with funds from the European Union's Next Generation/PRTR (Recovery, Transformation, and Resilience Plan), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Geochemical and petrological characterization of the 1970 eruption on Deception Island (Antarctica)

  • Ruiz Rodríguez, Jose Luis
  • Hopfenblatt, Joaquin
  • Albert, Helena
  • Pedrazzi, Dario
  • Geyer, Adelina
  • Aulinas, Meritxell
  • Polo-Sánchez, Antonio
  • Álvarez-Valero, Antonio M.
  • Vilanova, O.
  • Casas, J.M.
Deception Island is the most active volcanic system in the South Shetland Islands (Antarctica) with more than 20 explosive monogenetic eruptive events registered over the past two centuries. The most recent eruption (1970) was severely violent with a volcanic explosivity index (VEI) of 3. The column's height reached 10 km at its maximum, the estimated bulk eruptive volume was >0.1 km3 and tephra fallout was reported as far as in King George Island (> 150 km) distance. With the aim of disclosing the magmatic processes preceding one of the most violent recent eruptions in Deception Island, we have performed geochemical and textural analysis of the 1970 near-vent pyroclastic deposits and distal tephra fall-out layers found at Livingston Island¿s glaciers. The near-vent samples are classified into dilute PDCs and breccias with lithics. The olivine crystals microanalyses show the presence of two distinct populations with a low forsterite (Fo) content (65 - 70 mol.%), while the second population displays Fo values ranging from 80 to 85 mol.%. Both populations exhibit similar CaO (0.1 - 0.5) and variable NiO wt% content, between 0 - 0.4 (for low Fo population) and 0.02 - 0.10 (for high Fo population). The pyroxene microanalyses also reveal two distinct populations: i) augite-diopside (En45-50¿Fs5-25¿Wo38-50), and ii) enstatite (En90¿Fs10¿Wo0). Augite-diopside clinopyroxene can be further classified into two groups according to their Mg# (Mg#=Mg/(Mg+Fe)x100) mol% and TiO2 wt% content. The first exhibits Mg# concentrations around 80 - 85 mol% along with a broad range in TiO2 content (0.5 - 3.0 mol.%). The Mg# from the second population ranges from 55 to 70 mol% and displays TiO2 concentrations ranging from 0.5 to 1.25 wt%. Plagioclase crystals show a compositional anorthite (An) content ranging from 85 to 40 mol% (and are classified as Bytownite-Labradorite-Andesine). Comparison with microanalytical data from distal tephra layers, shows that i) both olivine populations are also represented, ii) augite-diopside compositions overlap, while the enstatite population was not found, and iii) plagioclase shows compositional congruence with the near-vent samples. Compared to other post-caldera collapse eruptions the 1970 deposits fall in the same compositional trend., This work is part of the CSIC Interdisciplinary Thematic Platform (PTI) Polar zone Observatory (PTIPOLARCSIC) activities. This research was partially funded by the MINECO VOLCLIMA (CGL2015-72629-EXP) and HYDROCAL (PID2020-114876GB-I00) MICIU/AEI/10.13039/501100011033 research project. Sampling was founded by CICYT (ANT91-1270, ANT93-0852 and ANT96-0734) and MICINN grant CTM2011-13578-E.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

MetPrep: A model agnostic meteorological pre-processor for emergency applications of local pollutant dispersal

  • Poulidis, Alexandros P.
  • Mingari, Leonardo
  • Kanakidou, Maria
  • Vrekoussis, Mihalis
  • Folch, Arnau
Topographic effects can impact the transport and deposition of chemicals and atmospheric pollutants Dynamical downscaling is commonly employed, but can be very computationally expensive DWMs are a computentionally inexpensive way of adding value to mesoscale simulations by estimating the impact of the topography MetPrep is being developed as an intermediary step between regional or global numerical weather prediction models and atmospheric transport models, This study is part of the grant PCI2022-134973-2 funded by MICIU/AEI/10.13039/501100011033 and by the European Union “NextGenerationEU”/PRTR and Germany’s Excellence Strategy grant (EXC 2077). All simulations were performed at the HPC cluster Aether at the University of Bremen,Laboratory for Modeling and Observation of the Earth System, supported by the DFG-Excellence project. The authors would like to thank Joan Aymerich Nicolàs for his support in analysing theWRF and FALL3D simulations.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Monitoring Tailings Dam Activities Using Seismic Noise Interferometry: A Case Study at Riotinto Mine

  • Sánchez-Pastor, Pilar
  • Diaz, J.
  • Schimmel, Martin
  • Seivane, Helena
  • Balaguera, Abraham
  • Ruiz, M.
  • Torné, Montserrat
  • Rodriguez, Susana
The Riotinto mine, one of the largest active open-pit mines in Europe, is located in southern Spain, Huelva. This historical mine has been exploited since Roman times and currently produces substantial quantities of copper and silver annually. To manage the waste materials generated from mining operations, the site features two large tailings dams, which are rigorously monitored using a variety of instruments, including prisms, GPS, piezometers, inclinometers, and INSAR., This work, financed with reference CPP2021 009072, has been funded by MCIN/AEI/10.13039/501100011033 (Ministry of Science, Innovation and Universities/State Innovation Agency) with funds from the European Union Next Generation/PRTR (Recovery, Transformation, and Resilience Plan
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Monitoring the elastic properties of the subsurface with quasi-monochromatic noise sources

  • Sánchez-Pastor, Pilar
  • Jorde, Samuel
  • Seivane, Helena
  • Balaguera, Abraham
  • Schimmel, Martin
  • Diaz, J.
  • Ruiz, M.
  • Rodriguez, Susana
  • Torné, Montserrat
Monitoring the elastic properties of the subsurface using seismic noise interferometry can be challenging whether coherent yet variable noise sources are present. Variations in both the subsurface medium and the noise sources within the target frequency band can lead to ambiguities in the correlations, complicating the interpretation of the results. This issue has traditionally limited the application of seismic noise interferometry in industrial and urban environments. In this study, we introduce a novel approach that leverages anthropogenic noise sources to address these challenges. We first identify and isolate specific quasi-monochromatic noise sources in the spectrogram. Then, we apply the principles of seismic noise interferometry to estimate changes in seismic velocity. This method requires a reference station where no changes in the medium are expected. By comparing results with those from the reference station, we can accurately differentiate between subsurface variations and source effects. We apply this approach to an active open-pit mine in Riotinto located in Huelva, southern Spain. Within the framework of the STONE project1 (Smart Terrain cOtrol using cuttiNg Edge technologies at the Riotinto, Spain), we deployed 30 seismic stations along a tailings dam wall in the Riotinto mine. We also utilize a wealth of direct measurements currently used for monitoring the dam's stability and compare it with the obtained seismic velocity time-series. Our new approach successfully detected medium changes that align well with other datasets. This research highlights the potential of seismic noise interferometry in complex environments, such as industrial and urban areas, and paves the way for more effective subsurface monitoring., This work, financed with reference CPP2021 009072, has been funded by MCIN/AEI/10.13039/501100011033 (Ministry of Science, Innovation and Universities/State Innovation Agency) with funds from the European Union Next Generation/PRTR (Recovery, Transformation, and Resilience Plan).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Study and comparison of lattice sieving algorithms

  • González de la Torre, Miguel Ángel
  • Rojas Rodríguez, Diego
  • Hernández Encinas, Luis
20th International Conference, HAIS 2025, Salamanca, Spain, October 16–17, 2025, The Shortest Vector Problem is one of the most important problems related to the security in the post-quantum cryptography. In this work, we present an state-of-the-art analysis of the different algo- rithms to solve this problem evaluating their efficiency in High Perfor- mance Computing systems. To do this, we have modified the Shortest Vector Problem oracle used in the implementation of the BKZ algorithm included in the General Sieve Kernel software library to test a suite of different algorithms. The main purpose of this research is to check whether current hardness estimations apply to highly parallelized imple- mentations. In this sense, we have tested the different algorithms in a High Performance Computing cluster and compared their performance on highly parallelized environments., This work was supported by Project Quantum-based Re- sistant Architectures and Techniques Integration QKD+PQC (QURSA) funded by MCIN/AEI/10.13039/501100011033, co-funded by EU “NextGenerationEU”/PRTR under Grant TED2021-130369B-C33. M.A.G.T. wishes to thank CSIC for its support under the EFiDiP project, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Artificial soils for the closure of a mine waste dump in the Iberian Pyrite Belt (Tharsis Mine, Huelva)

  • Molinero-García, Alberto
  • Millán Becerro, Ricardo
  • Asensio, Verónica
  • Parviainen, Annika
  • Martín-Peinado, Francisco José
  • Nieto, José Miguel
Póster presentado en Goldschmidt 2025, celebrado en Praga del 6 al 11 de julio, The Iberian Pyrite Belt (IPB), located southwest of the Iberian Peninsula, contains one of the largest deposits of massive sulfides in the world. Its exploitation for over 5000 years has exposed them (mainly pyrite, FeS2) to surface water and oxygen, leading to the production of acidic leachates with high concentrations of sulfates and metal(loid)s, known as acid mine drainage (AMD). This is a serious environmental problem associated with the mine sector, which causes the released of metals in the soil-plant-water system, degrading ecosystems and also causing a human health problem. The IPB mine waste dumps are an important sources of AMD. The most sustainable strategies to address this problem focus not only on its treatment, but also on its prevention, avoiding the oxidation of the sulfide minerals. This work presents a pilot experience (300m2 plot) based on the application of an artificial soil (Technosol) on a mine waste dump in the Tharsis mine (IPB, Huelva). The implementation of Technosols aims to avoid AMD generation and enable revegetation. Three Technosols were made with local waste and biochar, to apply three different layers. The first layer, directly on the mine waste, to promote the chemical stabilization of the metal sulfides and stop its oxidation. The middle layer, with ¿reducing¿ properties, to limit oxygen infiltration. The third layer, superficial and rich in nutrients to promote the growth of vegetation. The application of these Technosols increased the pH in the leached water and significantly decreased the concentration of metals, establishing itself as an effective technology to stop the generation of AMD. Moreover, the application of Technosols improved the properties of the dump material, increasing its pH, CaCO3 content, Cation Exchange Capacity (CEC), and decreasing the concentration of potentially toxic elements (PTEs). However, leached water and mine waste dump material need to be monitored to verify its long-term effectiveness., This work was supported by the project MINE.THE.GAP (grant agreement Nº 873149) funded by the European Union’s H2020 Research and Innovation programme. Alberto Molinero-García also acknowledges Juan de la Cierva Postdoctoral Fellowship (JDC2022–049235-I) supported by MICIU/AEI/10.13039/501100011033 and the European Union Next Generation EU/PRTR, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Integration of epigenomics into multi-omic approaches for a better understanding of the effects of tributiltin in zebrafish embryos

  • Menéndez-Pedriza, Albert
  • Faria, Melisa
  • Raldúa, Demetrio
  • Piña, Benjamín
  • Jaumot, Joaquim
  • Navarro-Martín, Laia
Environmental exposures to EDCs have been proven to significantly affect the epigenetic status of ecotoxicologically relevant species of fish. However, the mechanism of action remains unclear. Environmental epigenetics in addition to other omic layers (including transcriptomics and metabolomics) have been applied to explore holistic molecular perturbations by a great variety of pollutants. However, the study of single “layers” of biological information impedes a comprehensive understanding of toxicity mechanisms and key events for adverse outcome pathway development. Therefore, the integration of multi-omics analysis seems to be a powerful tool to efficiently capture, not only the toxic mechanisms, but also multifaceted networks from gene to phenotype., Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033, Grant RyC2019-026426-I and scholarship PRE2020-094656 and European Union (EU), Grants MSCA-IF- 2017-EPISTOX-797725 and EPIBOOST-101078991., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

From Genes to Lipids: Multi-omic Approaches in Environmental Toxicogenomics

  • Navarro-Martín, Laia
In recent decades, the effects of environmental pollution on human health and the environment have been a growing concern. Historically, Endocrine Disruptors (EDCs) were known for affecting reproductionrelated signaling mechanisms, but more recent studies have shown they also act through other hormonal systems. Understanding the modes of action of EDCs is crucial for protecting human and environmental health through adequate risk assessment and regulation. Recent advancements in omics technologies (genomics, transcriptomics, metabolomics, lipidomics, etc.) have allowed for studying the effects of EDCs at different biological levels, leading to better understanding of their adverse effects. Epigenetics has revealed that environmental exposures, including EDCs, can induce lasting effects through alterations in DNA methylation, histone modifications, and non-coding RNA expression. To enhance understanding of EDCs' modes of action, efforts should be placed at least in three main areas of research. First, the identification of biomarkers of exposure. Recent studies have shown that changes in the transcriptome, not only reveal affected signaling pathways, but also serve as early response signals to exposure to EDCs. However, consensus on transcriptomic biomarkers for (eco)toxicological characterization is still lacking. Second, the integration of multi-omics data offers a more comprehensive understanding of EDCs’ effects. Furthermore, the introduction of emerging technologies, such as spatial and single-cell omics, are needed to address cellular heterogeneity, which is an inherent property of an endocrine response. Last but not least, the long-term effects of exposure to EDCs are still unexplored. It has been proved dificult to correlate epigenetic changes with transcriptomic alterations, which highlight the need for further studies on epigenetics. In summary, challenges and future research lines should integrate innovative methodologies and multi-omics approaches to enhance risk assessment and regulation of endocrine-disrupting chemicals, ultimately improving human and environmental health., Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033, Grants PID2021-122929OB-C33, CEX2018-000794-S, CNS2022-135257 and European Union (EU), Grant 101078991., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Molecular effects of progestins during zebrafish early development

  • Sokalchuk, Liliya
  • Broto, Pol
  • Menéndez-Pedriza, Albert
  • Gual, Marta
  • Medina, Paula
  • Díaz, Noelia
  • Blázquez, Mercedes
  • Jaumot, Joaquim
  • Navarro-Martín, Laia
Synthetic progestogens and their derivatives have proven to cause significant ecotoxicological effects in zebrafish reproductive status, including puberty1. However, less is known about the effects that they can cause during development and their mode of action at early stages still remains elusive. The purpose of our study was to determine the effects of progesterone (P4), levonorgestrel (LNG) and mifepristone (RU486) at the transcriptomic and lipidomic level in 5 days postfertilization (dpf) zebrafish embryos., Funding received from the Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033 (Grant PID2021-122929OB-C33)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

SPATIAL DISTRIBUTION OF KEY LIPIDS AND GENES DURING SEA BASS TESTIS MATURATION

  • Menéndez-Pedriza, Albert
  • Blázquez, Mercedes
  • Chicano-Gálvez, Eduardo
  • Jaumot, Joaquim
  • Navarro-Martín, Laia
The endeavor to increase our understanding of underlying regulatory mechanisms in biological systems is catalyzing the development of novel approaches that provide key insights into these systems. Spatial multi-omic techniques have recently arisen to overcome the limitations of conventional bulk omic approaches to study multicellular systems. One major challenge in the industrial production of European sea bass (Dicentrarchus labrax) is the high percentage of precocious maturation in males, which poses a significant drawback for commercialization due to their smaller size. In this study, we propose the use of spatial multi-omics combining transcriptomic and lipidomic data to better elucidate the molecular changes that take place during sea bass early testis maturation., Spanish Ministry of Science and Innovation MCIN/AEI/10.13039/501100011033, Grants PID2021-122929OB-C33, CEX2018-000794-S and scholarship PRE2020-094656., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Evaluación de tendencias temporales y espaciales en el consumo de alcohol en España a partir del análisis de aguas residuales y datos epidemiológicos de distinto origen

  • López de Alda, Miren
  • Bonansea, R. I.
  • Quintana, J. B.
  • González-Gómez, X.
  • Bijlsma, L.
  • Montes, R.
  • Picó, Yolanda
  • Valcárcel, Y.
Antecedentes/Objetivos: El alcohol es una de las sustancias psicoactivas más consumidas en todo el mundo. Métodos: Este estudio evaluó el consumo de alcohol en España mediante el análisis de etil sulfato (EtS) en aguas residuales de hasta 28 depuradoras de 10 Comunidades Autónomas durante 2021-2023, con un análisis detallado y más prolongado en el tiempo (desde 2013) en Cataluña. La metodología combinó el análisis del consumo de alcohol (mediante la evaluación de EtS) con datos socioeconómicos, demográficos y de salud pública, incluyendo la incidencia de enfermedades, hospitalizaciones y mortalidad. Resultados: Los hallazgos revelaron patrones de consumo principalmente de tipo recreativo, con aumentos significativos durante los fines de semana. Se identificaron variaciones geográficas relevantes, con mayor consumo en poblaciones pequeñas y regiones envejecidas. Se encontraron correlaciones positivas significativas entre el consumo de alcohol y la renta, pero no con el gasto específico en bebidas alcohólicas. El impacto en la salud se puso de manifiesto a través de correlaciones significativas y positivas con neoplasias específicas (como de estómago y renal), enfermedades cardiovasculares (aterosclerosis y enfermedad hipertensiva) y trastornos mentales. Los análisis de hospitalización y mortalidad mostraron patrones consistentes, especialmente en enfermedades tradicionalmente asociadas al consumo de alcohol. Conclusiones/Recomendaciones: Las conclusiones destacan la eficacia del análisis de aguas residuales como herramienta de monitorización del consumo de alcohol, la importancia de factores sociodemográficos en los patrones de consumo, y la necesidad de estrategias de prevención adaptadas a contextos regionales específicos. Los hallazgos tienen implicaciones relevantes para la planificación de recursos sanitarios y el diseño de políticas de salud pública., MCIN/AEI/10.13039/501100011033 (RED2022-134363-T), Delegación del Gobierno para el Plan Nacional Sobre Drogas (2020I009), Generalitat de Catalunya (SA-2024-465, y 2021 SGR 0213-9111 © 2025 SESPAS. Publicado por Elsevier España, S.L.U. Todos los derechos reservados 00753), Instituto de Salud Carlos III (RIAPAD, RD24/0003/0001).
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Contribución de congreso (ConferenceOutput)

A stated preference survey for evaluating pedestrians’ expectations on walkways

  • Grazia Bellizzi, Maria
  • Forciniti, Carmen
Trabajo presentado en: R-Evolucionando el transporte, XIV Congreso de Ingeniería del Transporte (CIT 2021), realizado en modalidad online los días 6, 7 y 8 de julio de 2021, organizado por la Universidad de Burgos, Pedestrian mobility is the oldest form of transport in urban areas. Due to the increase of private vehicles, transport planning has mainly focused on traffic congestion problems, neglecting pedestrian mobility and public transport. Given the current situation of pollution and climate change, walkability is again one of the most important transport modes to achieve urban sustainable mobility in the next future. As reported in the literature, city dwellers are willing to walk to carry out daily activities but complain about the lack of adequate pedestrian infrastructure. For promoting pedestrian mobility, the quality levels of pedestrian paths should be increased. Many researchers suggest methodologies for determining the pedestrian level of service. Among these, some studies consider both path physical characteristics and users' perception about the walkway. Investigating on users’ perception represents a good strategy for implementing interventions aimed at increasing the quality of service. In addition to users’ perception about the different characteristics of the pedestrian path, it is also necessary to take over the importance that users assign to each aspect. This work proposes the design of a Stated Preferences survey and the analysis of the preliminary results. A questionnaire was addressed to a sample of 240 pedestrians on a walkway located in the University Campus of Rende (Italy). The aim is recording pedestrians’ perception about the characteristics of the path and detecting the choices they would make in a hypothetical scenario. Then, the collected data has been analysed by means of a discrete choice model for assessing the weights assigned by pedestrians to each aspect included in the analysis. The results have allowed the most relevant pedestrian path aspects for users to be identified. Just on these aspects it is necessary to intervene in order to make pedestrian paths increasingly attractive and to encourage users towards active mobility., Support from “POR Calabria FESR-FSE 2014/2020 – Linea B) Azione 10.5.12” is gratefully acknowledged.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

PeRISCVcope: a tiny teaching-oriented RISC-V interpreter

  • Suárez Gracia, D.
  • Valero, A.
  • Gran Tejero, R.
  • Villarroya, M.
  • Viñals, V.
The fast advances of computer systems translate into a growing demand of methodologies and tools to introduce those novelties into classes. Among the plethora of those advances, virtualization has become an essential technology in almost every relevant system stack, from connected cars to hyperscaled cloud servers. However, introducing those technologies into the classroom remains a challenging task because of the huge complexity of their software components that may hinder the learning process of students. peRISCVcope aims to help in this area by proposing a tiny yet powerful interpreter to dig into virtualization technologies, such as the implementation of trap&emulate hypervisors. With less than 2,000 lines of code, and thanks to the conciseness of the RV32I base instruction set of RISC-V, peRISCVcope enables students to make virtualization knowledge their own. This paper presents our experiences developing and testing a virtualization laboratory where students implement parts of an interpreter. After the practical experience, peRISCVcope has been proved as a useful pedagogical tool, and, most importantly, students have positively rated the experience.
O2, repositorio institucional de la UOC
Publicación Contribución de congreso (ConferenceOutput)

Vulnerability analysis to wildland-urban interface fires in metropolitan areas: an integrated approach

  • Pastor, Elsa
  • Caballero Valero, David
  • Rodríguez-Giralt, Israel
  • Arenas Conejo, Miriam
  • Moran Nunez, Francisca Josefa
  • Canaleta Garcia, Guillem
  • Vacca, Pascale
  • Àgueda, Alba
  • Planas, Eulalia
Wildfires pose a growing threat to populated areas around the world and especially in the Mediterranean Basin. Numerous Mediterranean cities have typically developed neighbourhoods that expand into forest land in which basic aspects for an efficient WUI fire management have not been considered. In this paper, we present a holistic approach to analyse threats to metropolitan areas due to WUI fires, accounting for infrastructural, societal and ecosystems vulnerability at settlement scale. Based on design fires and the key parameters responsible of fire impact and percolation through communities of most probable WUI fire events, we define key indicators to describe how vulnerable structures are in WUI metropolitan areas. Following, urban and societal indicators are selected to account for population’s vulnerability and, finally, ecosystems potential losses are accounted by ecosystem vulnerability indicators such as ecosystem sensitivity and adaptability. We have implemented this methodology to analyse vulnerability in Barcelona WUI areas and identified those that can be more threatened in case of wildfire. Results of this study will be key to inform risk-reduction public policies, as they provide particular insights on those WUI areas within Barcelona municipality that should be prioritized along with the specific issues that should be tackled.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Direct, longwave radiative forcing of mineral dust: improvement of its estimation by means of tools recently developed by the EARLINET community

  • Sicard, Michaël
  • Muñoz Porcar, Constantino
  • Comerón Tejero, Adolfo
  • Rodríguez Gómez, Alejandro Antonio
  • Rocadenbosch Burillo, Francisco
  • Barragán Cuesta, Rubén
The objective of this work is to investigate how the knowledge of the vertically-resolved fine and coarse mode aerosol optical depth modifies the longwave radiative forcing. Since relatively little the EARLINET (European Aerosol Research Lidar Network) community has developed codes that combine sun-photometer and lidar data to retrieve a set of parameters vertically-resolved related to the size distribution (fine and coarse mode extinction coefficients, fine and coarse mode volumetric concentrations, etc.). We concentrate on the case of mineral dust whose size distribution is often dominated by the coarse mode. This work demonstrates that the knowledge of the vertically-resolved fine and coarse mode aerosol optical depth modifies the LW RF as compared to the classical approach with a unique profile of total aerosol optical depth. The results show that when the coarse mode predominates the classical approach underestimates the dust longwave radiative forcing by 10 to 20 % at the surface. The effect at the top of the atmosphere is not systematic because of the predominance of fine particles near the top of the dust layer., This work is supported by the 7th Framework Programme project Aerosols, Clouds, and Trace Gases Research Infrastructure Network (ACTRIS) (grant agreement no. 262254). Lidar measurements in Barcelona are supported by the Spanish Ministry of Science and Innovation and FEDER funds under the projects TEC2012-34575, UNPC10-4E-442, CGL2011-13580-E/CLI and CGL2011-16124-E/CLI., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Concept design of a multiwavelength aerosol lidar system with mitigated diattenuation effects and depolarization-measurement capability

  • Comerón Tejero, Adolfo
  • Sicard, Michaël
  • Vidal Calvo, Eric
  • Barragán Cuesta, Rubén
  • Muñoz Porcar, Constantino
  • Rodríguez Gómez, Alejandro Antonio
  • Tiana Alsina, Jordi
  • Rocadenbosch Burillo, Francisco
  • García Vizcaíno, David
It is known that the retrieval of aerosol extinction and backscatter coefficients from lidar data acquired through so-called total-power channels – intended to measure the backscattered power irrespective of the polarization – can be adversely affected by varying depolarization effects produced by the aerosol under measurement. This effect can be particularly noticeable in advanced multiwavelength systems, where different wavelengths are separated using a system of dichroic beam splitters, because in general the reflection and transmission coefficients of the beam splitters will be different for fields with polarization parallel or perpendicular to the incidence plane. Here we propose a setup for multiwavelength aerosol lidars alleviating diattenuation effects due to changing depolarization conditions while allowing measure linear depolarization., This work has been supported by the following projects and grants: European Union 7th Framework Programme grant agreement No. 262254 (ACTRIS), Spanish Ministry for Economy and Competitiveness grants TEC2012-34575 and UNPC10-4E-442, and by the Catalan Agency for Support to Universities and Research (AGAUR) grant 2014 SGR 583., Peer Reviewed, Postprint (published version)
Docta Complutense
Publicación Contribución de congreso (ConferenceOutput)

Efecto de las mezclas de hojarasca de especies arbóreas invasoras en las especies del sotobosque de ribera, Effect of litter mixtures of invader species on herbaceous understory in riverine areas

  • Pérez Corona, María Esther
  • López, N.
  • Plaza, A.
  • Cuevas, M.
  • Vázquez de Aldana, Beatriz R.
  • De Las Heras Puñal, María Paloma
The objective of this study was to determine the effect of riverine invasive tree species in the presence and growth of herbaceous understory species. The experiment simulated scenarios in which seeds of grasses, legumes and forbs species were germinated and grown in the presence of leaf litter of tree species, both exotic and native. The effect of one species litter or various species litter mixtures that more closely represent ecosystem natural conditions were considered. The results indicate a negative effect of both native and exotic tree species litter in the growth of herbaceous species. These effects are different depending on the target species. The combination of litter modifies the responses of the target species to the presence of litter.
Docta Complutense
Publicación Contribución de congreso (ConferenceOutput)

Efecto de árboles exóticos de un bosque de ribera en el crecimiento y competencia de especies del sotobosque herbáceo, Effects of invasive tree species on growth and competitive ability of herbaceous understory species of a riverine forest

  • De Las Heras Puñal, María Paloma
  • Crespo Mazagatos, Alba
  • Yoldi Salinas, G.
  • Vázquez de Aldana, Beatriz R.
  • Pérez Corona, María Esther
The aim of this study was to determine how leaf litter of three invasive tree species affects growth and intrasespecífic competitive ability of two common species in the herbaceous understory of a riverine forest located at Henares river (Madrid): Trifolium repens and Dactylis glomerata. We performed a greenhouse experiment with the two species growing with leaf litter of invasive and native tree species, at three levels of competition. For both species, the germination rate depends on the type of leaf litter, but plant competition is the determining factor in the further successful development of individuals. Dactylis glomerata showed lower growth as competition increases, while T. repens growth differs at the different levels of competition depending on the type of leaf litter. The results show a reduction in the plant growth between some leaf litter treatments only at the lowest levels of competition, but at high densities there is no evidence of a specific effect of the exotic leaf litter different from the native one.
Docta Complutense
Publicación Contribución de congreso (ConferenceOutput)

Efectos de dos especies exóticas invasoras (Ailanthus altissima y Robinia pseudoacacia) sobre el ciclo de nutrientes y la biomasa fúngica de un ecosistema fluvial, Effects of two exotic invasive species (Ailanthus altissima and Robinia pseudoacacia) on nutrient cycle and fungi biomass in a fluvial ecosystem

  • Medina-Villar, Silvia
  • Alonso, A.
  • Vázquez de Aldana, Beatriz R.
  • Pérez Corona, María Esther
  • Castro Díez, Pilar
The exotic tree species, Ailanthus altissima and Robinia pseudoacacia, invade riparian zones of Iberian Peninsula. Exotic leaves contain different physico-chemical characteristics to native leaves, so decomposition process may be different. We designed a decomposition experiment in order to assess the impact of exotic leaf litter on stream nutrient cycle and fungi biomass. Our results suggest that Populus alba (native tree), replacement by A. altissima can accelerate the nutrient cycle and overtake the fungi colonization. In contrast, Fraxinus angustifolia (native tree), replacement by R. pseudoacacia can decelerate the nutrient cycle.
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Automatic blood glucose classification for gestational diabetes with feature selection: decision trees vs neural networks

  • Caballero Ruiz, E.
  • García Sáez, Gema|||0000-0002-8396-8185
  • Rigla Cros, Mercedes
  • Balsells, M.
  • Pons, Belén
  • Morillo, Marta
  • Gómez Aguilera, Enrique Javier|||0000-0001-6998-1407
  • Hernando Pérez, María Elena|||0000-0001-6182-313X
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

High order UWB pulses generation based on a scalable phase-to-intensity technique

  • Moreno Galue, Vanessa
  • Mora, José
  • Barrera, David
  • Muriel Fernández, Miguel Ángel|||0000-0002-5148-6624
  • Capmany, José
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Distributed Birefringence Measurements Using Polarization Correlation in Phase-Sensitive OTDR

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Lu, Xin
  • Soto Hernández, Marcelo Alfonso
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Thévenaz, Luc
European Conference on Optical Communications, ECOC, Cannes, France, 21-26 sept. 2014., A method based on phase-sensitive OTDR is proposed for distributed birefringence measurements along optical fibres. A high accuracy is experimentally demonstrated, enabling the characterisation of single-mode fibres with a minimum detectable birefringence of the order of 10-7, European Cooperation in Science and Technology
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

ILORIN: Identifier-LOcator Resolution for Infrastructure-less Networks

  • Rodríguez Fernández, Daniel
  • Martinez Yelmo, Isaias|||0000-0001-9648-8669
  • Munthe-Kaas, Ellen
  • Plagemann, Thomas
Third International Conference on Network of the Future (NOF 2012), Nov. 21-23 2012, Tunis, Tunisia., In order to overcome the limitations of the current Internet addressing, it is generally accepted that the Future Internet needs a separation between identifiers and network locators. Such identifier-locator split is also needed in infrastructureless networks, such as Mobile ad hoc Networks (MANETs) and Delay Tolerant Networks, since they are an integral part of the Future Internet. Despite the amount of work in infrastructurebased networks, only a few proposals have considered how to apply this identifier-locator split in infrastructure-less networks. The contribution of this paper is an identifier-locator resolution system that can work in sparse MANETs, which are prone to network partitions. Our approach is an identifier-locator association discovery system, which uses periodic beacons to exchange the resolution information, avoiding the establishment of shared state between nodes. Our system exploits the broadcast nature of the wireless medium, opportunistic encounters, and information replication to disseminate identifier-locator associations across the network. The results of our extensive experiments demonstrate that our solution outperforms the related work, achieving a higher identifier-locator association discovery rate., Norwegian Research Council, Comunidad de Madrid
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Contribución de congreso (ConferenceOutput)

Overview of Challenges of Microgrid Clusters

  • Sainz Sapera, Luis
  • Fernández Ramírez, Luis Miguel
  • Jurado Melguizo, Francisco
  • Horrillo Quintero, Pablo
Environmental issues and increasing power demand are driving the development of microgrids (MGs), which can operate in AC, DC or mixed AC/DC technology. Although the development of MGs is mature, some issues still need to be solved, such as the limited power of renewable energy sources and the demand for smart MG technologies to manage energy storage systems and electric vehicle loads. The need to interconnect different MGs in a coordinated manner to form microgrid clusters (MGCs) to improve stability, enhance energy control and develop complementary services is also receiving increasing attention. This paper reviews the current challenges of the new paradigm of MGCs and addresses the computational tools required for their operation, optimal control of operation and planning, stability concerns and integration in energy markets., This work was partially supported by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, FEDER, UE (Grants PID2021-123633OB-C31, -C32 and - C33 supported by MCIN/AEI/10.13039/501100011033/ FEDER, UE)
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Contribución de congreso (ConferenceOutput)

From Black Box to Glass Box: GenAI in Non-STEM Computing Education

  • Gutiérrez Madroñal, Lorena
  • Caballero Hernández, Juan Antonio
  • Baena Pérez, Rubén
  • Palomo Duarte, Manuel
The rapid integration of Generative AI into higher education challenges traditional assessment integrity. This quasi-experimental study analyses its impact on web development skills within an Advertising and Public Relations degree. Drawing on academic performance data, transparency logs, and student perception surveys across four distinct cohorts, the research traces the evolution from a pre-AI baseline through unregulated adoption to a regulated Glass box intervention. Quantitative analysis reveals that while unregulated adoption led to mark inflation, the Glass box protocol stabilised performance. Granular data exposes a dual impact: Generative AI hindered accuracy in foundational tasks due to unverified corrections, yet eliminated resubmissions in complex tasks. The paper contributes evidence-based guidelines for designing non-STEM assessments, demonstrating how Chain-of-Thought documentation converts GenAI from a threat into a verifiable auxiliary tool., Proyecto GENIALLE (ref. PID2023-149674OB-I00) de MICIU/AEI/10.13039/501100011033 y ERDF (EU).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Contribución de congreso (ConferenceOutput)

Fuzzy Control for Multi-Energy Microgrids

  • Horrillo Quintero, Pablo
  • García Triviño, Pablo
  • Hosseini, Ehsan
  • García Vázquez, Carlos Andrés
  • Sánchez Sainz, Higinio
  • Ugalde Loo, Carlos E.
  • Péric, Vedran S.
  • Fernández Ramírez, Luis Miguel
Multi-energy microgrids (MEMGs) have emerged as an effective solution for reducing greenhouse gas emissions. These systems leverage the coordination of multiple energy vectors to enhance efficiency and achieve greater independence from the main grid. This paper introduces a dynamic fuzzy-logic energy management system (EMS) designed for a MEMG that encompasses gas and electricity energy vectors. The thermal network of the MEMG comprises a gas boiler, an electric boiler, and a heat load. In parallel, the electrical network consists of a photovoltaic (PV) system, a battery energy storage system, an electric load, and a connection with the grid. The EMS plays a crucial role in evaluating the PV power generation and electric demand, and it adjusts the water temperature in the electric boiler to minimize reliance on the local grid. To evaluate the effectiveness of the MEMG and EMS, a simulation spanning 4.5 hours was conducted under various operating conditions for sun irradiance, heat, water, and electric demand. The results demonstrate the capability of the fuzzylogic based EMS to reduce the dependence on the local grid, thereby showcasing the suitability of this approach in MEMGs., This work was partially supported by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, and Unión Europea (Grant TED2021-129631B-C32 supported by MCIN/AEI/10.13039/501100011033 and NextGenerationEU/PRTR).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Contribución de congreso (ConferenceOutput)

Control of hybrid renewable energy and storage-integrated multienergy microgrid with electric and gas boiler, electric vehicle, and household loads

  • Hosseini, Ehsan
  • Horrillo Quintero, Pablo
  • García Triviño, Pablo
  • García Vázquez, Carlos Andrés
  • Sánchez Sainz, Higinio
  • Fernández Ramírez, Luis Miguel
A hybrid renewable energy sources (RES) microgrid supported by battery storages (BS) is designed in this paper to feed residential demands including electric vehicle (EV), electric boiler (EB), and household loads. A gas boiler (GB) is also considered in the proposed microgrid to evaluate an entire thermal bus through the GB, EB, and an underfloor heating system. A constant-speed wind turbine (WT) and a PV power system are considered as RES to reduce the dependency of energy on the grid. Great importance is placed on the thermal and electrical power balance between sources and loads; hence, a fuzzy logic (FL)-based energy management system (EMS) is designed in this respect. The EMS was evaluated using Simulink under various weather conditions and thermal/electrical demands. The results show that the proposed EMS controlled the BS power and satisfied the requested demands under all conditions, while hardly intervening in the grid power., This work was partially supported by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, and Unión Europea (Grant TED2021-129631B-C32 supported by MCIN/AEI/10.13039/501100011033 and NextGenerationEU/PRTR).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Contribución de congreso (ConferenceOutput)

Control of an Hybrid AC/DC MG Using Raspberry Pi

  • Carrasco González, David
  • Sarrias Mena, Raúl
  • Horrillo Quintero, Pablo
  • Llorens Iborra, Francisco
  • Fernández Ramírez, Luis Miguel
Nowadays, hybrid AC/DC microgrids (HMG) are growing in popularity because of human needs and their benefits. They are composed of the interconnection of a DC microgrid (MG) and an AC MG, and each MG is constituted by generation, energy storage, and consumption technologies. This study develops a new control strategy for an HMG consisting of a DC MG and an AC MG interconnected through a bidirectional power converter. The AC MG is composed of AC loads, a photovoltaic (PV) generator and a battery bank. The DC MG is made up of a hydrogen system, DC loads, wind turbine (WT) and ultracapacitor (UC). The HMG is evaluated under different conditions in an experimental setup constituted by an OPAL-RT 4512 unit and a Raspberry Pi microcontroller. This experimental setup permits to execute the HMG in real time and to validate the results obtained. Finally, the control system developed for this HMG presents a satisfactory behaviour under different working conditions., This work was partially supported by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, FEDER, UE (Grant PID2021-123633OB-C32 supported by MCIN/AEI/10.13039/501100011033/ FEDER, UE).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Contribución de congreso (ConferenceOutput)

Intelligent Control Algorithm for Power Balance Between Microgrids

  • Carrasco González, David
  • Sarrias Mena, Raúl
  • Horrillo Quintero, Pablo
  • Llorens Iborra, Francisco
  • Fernández Ramírez, Luis Miguel
Microgrid clusters are becoming increasingly popular owing to their many benefits and their ability to meet human needs in terms of energy flexibility, security, and integration of renewable sources. They are composed of interconnected microgrids with a variety of power generation sources, loads, and storage devices. Microgrid clusters can also combine DC and AC technologies, even within a single microgrid. In this work, a new energy management system is developed for a microgrid cluster consisting of two microgrids connected to the main grid. The proposed energy management system, acting as the centralized control layer in the microgrid cluster, is based on a fuzzy-logic algorithm. The microgrid cluster consists of an AC microgrid integrating a photovoltaic generator, a battery bank and AC loads; and a DC microgrid composed of a wind turbine, electrolyzer, ultracapacitor, fuel cell and DC loads. The microgrid cluster is tested under different working conditions, such as variable wind speed and solar irradiance, and connection and disconnection of the loads. Finally, the energy management system implemented in the microgrid cluster exhibits a correct behaviour under different conditions, according to the results obtained., This work was partially supported by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, FEDER, UE (Grant PID2021-123633OB-C32 supported by MCIN/AEI/10.13039/501100011033/FEDER, UE).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Contribución de congreso (ConferenceOutput)

Distributed Control for a Microgrid Cluster: Implementation and Experimental Validation

  • Carrasco González, David
  • Sarrias Mena, Raúl
  • Horrillo Quintero, Pablo
  • Hosseini, Ehsan
  • Llorens Iborra, Francisco
  • Fernández Ramírez, Luis Miguel
In response to growing energy demands and concerns about climate change, microgrid clusters (MGCs) are gaining widespread attention. Their ability to integrate technologies for energy consumption, generation, and storage in AC, DC or a compound of both offer a high degree of flexibility and resiliency. This research introduces a new control strategy for an MGC composed of two MGs interconnected to a local grid via a point of common coupling. The first one is a DC MG comprising an ultracapacitor (UC), wind turbine (WT), DC loads and hydrogen system. The second is an AC MG with a battery bank, AC loads and photovoltaic (PV) generator. The control strategy employs local controllers for each device and distributed control via two control agents, coordinating the power distribution among the energy storage systems (ESSs) of the MGC. This system is tested and validated on a real-time experimental setup, using two Raspberry Pi microcontrollers and an OPAL-RT unit, under different working conditions. The results obtained in this work show that the control strategy implemented in the MGC works correctly., This work was partially supported by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, FEDER, UE (Grant PID2021- 123633OB-C32 supported by MCIN/AEI/10.13039/501100011033/FEDER, UE).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Contribución de congreso (ConferenceOutput)

Optimal Energy Management System for Storage-Integrated Multi-Energy Microgrids

  • Hosseini, Ehsan
  • Horrillo Quintero, Pablo
  • García Triviño, Pablo
  • García Vázquez, Carlos Andrés
  • Sánchez Sainz, Higinio
  • Fernández Ramírez, Luis Miguel
The paper describes the design and evaluation of a multi-energy microgrid (MEMG) that incorporates renewable energy sources (RES), battery storage (BS), fuel cells (FC), electrolyzer (ELZ) as hydrogen vector, and thermal vector to meet residential energy demands. The focus of the paper is on developing an optimal energy management system (EMS) using the ‘fmincon’ optimization algorithm to economically dispatch power between electrical and hydrogen sources while maintaining a balance between thermal and electrical power across all components of the microgrid. The EMS is evaluated using Simulink under different weather scenarios and varying thermal/electrical demands. The results indicate that the proposed EMS effectively controls the power flow from the BS, FC, and ELZ ensuring that minimum costs are imposed on the MEMG while the demands are met under all conditions. Additionally, it suggests that the MEMG is largely selfsufficient, requiring minimal intervention from the grid., This work was partially supported by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, and Unión Europea (Grant TED2021-129631B-C32 supported by MCIN/AEI/10.13039/501100011033 and NextGenerationEU/PRTR).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Contribución de congreso (ConferenceOutput)

Control Coordinado de un Clúster de Microrredes

  • Carrasco González, David
  • Sarrias Mena, Raúl
  • Horrillo Quintero, Pablo
  • Llorens Iborra, Francisco
  • Fernández Ramírez, Luis Miguel
Los clústeres de microrredes (CMR) están ganando popularidad debido a sus capacidades para mejorar la eficiencia energética, resistencia y fiabilidad. Los CMR pueden integrar sistemas de generación, consumo y de almacenamiento en un único sistema, incluso combinar tecnologías en corriente continua (CC) y corriente alterna (CA), ofreciendo una gran flexibilidad y resistencias a las microrredes (MR) individuales. Este trabajo contribuye al desarrollo de estos tipos de sistemas al implementar una estrategia de control para un CMR, compuesto por dos MR interconectadas a una red principal a través de un punto de acoplamiento común. Una de ellas es una MR de CC, que incorpora un aerogenerador, un electrolizador (EZ), un supercondensador (SC), una pila de combustible (PC) y cargas locales de CC, mientras la otra MR es de CA y se compone de una planta fotovoltaica, un banco de baterías y cargas locales de CA. La estrategia de control se basa en el control local e independiente de cada equipo que conforma el CMR y un control supervisor coordinado, formado por dos sistemas de gestión de la energía (SGE), que coordinan la distribución de potencia entre los sistemas de almacenamiento de la energía (SAE) que conforman el CMR. El sistema se evalúa en MATLAB/Simulink en una simulación ante diferentes condiciones de trabajo, que varían durante la simulación. Finalmente, los resultados obtenidos en este trabajo muestran que la estrategia de control implementada en el CMR funciona correctamente., Este trabajo ha sido parcialmente financiado por el Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, FEDER, UE (Proyecto PID2021-123633OB-C32 financiado por MCIN/AEI/10.13039/501100011033/ FEDER, UE)
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Contribución de congreso (ConferenceOutput)

Control Scheme for Multi-Energy Microgrids with Power, Heating, Cooling, and Hydrogen Vectors

  • Horrillo Quintero, Pablo
  • García Triviño, Pablo
  • Hosseini, Ehsan
  • García Vázquez, Carlos Andrés
  • Sánchez Sainz, Higinio
  • Fernández Ramírez, Luis Miguel
This paper provides a dynamic control for a multi-energy microgrid (MEMG) comprising heating, cooling, hydrogen, and renewable power vectors connected to a utility grid. A gas boiler is responsible for controlling the hot water thermal bus, whereas an electric boiler manages the hot water demand. An absorption chiller is employed in the cooling circuit to fulfill the cooling load. Furthermore, a battery and a hydrogen system comprising a fuel cell, electrolyzer, and hydrogen tank are considered as energy storage systems (ESSs) for the MEMG. The renewable power is provided through a PV power plant. A new energy management system based on operating states (state-based EMS) is designed to provide three different control scenarios: low temperature (LTM), normal temperature (NTM), and high temperature (HTM). The main target of the presented EMS is to adjust the thermal sources with the aim of avoiding the consumption of the local grid. A 4-hour simulation performed in MATLAB/Simulink, encompassing diverse scenarios, effectively validates the control response of the proposed MEMG. The results illustrated the applicability of this approach within the context of MEMGs., This work was partially supported by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, and Unión Europea (Grant TED2021-129631B-C32 supported by MCIN/AEI/10.13039/501100011033 and NextGenerationEU/PRTR).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Contribución de congreso (ConferenceOutput)

Control Hardware-In-the-Loop de Microrredes Multi-energía

  • Horrillo Quintero, Pablo
  • García Triviño, Pablo
  • Hosseini, Ehsan
  • García Vázquez, Carlos Andrés
  • Sánchez Sainz, Higinio
  • Fernández Ramírez, Luis Miguel
Este artículo presenta la validación en tiempo real del control de una microrred multi-energía (MRME) empleando un montaje hardware-in-the-loop (HIL). El montaje HIL está compuesto por una unidad OPAL-RT4512, una unidad de control dSPACE MicroLabBox y un osciloscopio digital Yokogawa DLM4038. La MRME está modelada de manera dinámica incluyendo vectores energéticos de electricidad, calor, frío e hidrógeno. Se diseña un sistema de gestión de energía basado en lógica difusa (SGE-LD) para establecer un funcionamiento coordinado entre los vectores energéticos. Se considera una planta de energía solar fotovoltaica como la principal fuente renovable, mientras que calderas de gas y eléctrica, y una enfriadora de absorción, conforman las fuentes térmicas. Un sistema de almacenamiento de energía (SAE) híbrido compuesto por una batería (BAT), una pila de combustible, un electrolizador y un tanque de hidrógeno respaldan la producción renovable. El SGE-LD evalúa la potencia fotovoltaica y la demanda eléctrica, regulando la temperatura en las fuentes térmicas para disminuir la dependencia de la red local. Al analizar diversos escenarios que abarcan condiciones climáticas, térmicas, flujos de agua y demanda eléctrica, los resultados obtenidos con equipos reales demuestran la viabilidad práctica de la estrategia de control propuesta., Este trabajo ha sido parcialmente financiado por el Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, y Unión Europea “NextGenerationEU”/PRTR” (Proyecto TED2021-129631B-C32 financiado por MCIN/AEI/10.13039/501100011033 y NextGenerationEU/PRTR).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Contribución de congreso (ConferenceOutput)

Chthonic Sacrifices: Canine Offerings in the Punic Ritual Wells of Gadir (Cádiz, Spain), Sacrificios ctónicos: ofrendas caninas en los pozos rituales púnicos de Gadir (Cádiz, España)

  • Portero, Rodrigo
  • Niveau De Villedary Mariñas, Ana María
  • Pérez Infantes, Carolina
Póster científico, This paper presents the zooarchaeological and taphonomic analysis of canid remains recovered from the Punic ritual wells of the Gadir necropolis in Cadiz, dated between the 5th and 3rd centuries BC. The research focuses on the contexts of Abarzuza, Palacio de Justicia and San Severiano. These wells were originally constructed for water collection but were later transformed into ritual structures and filled through successive episodes that included libations, offerings and sacrifices. Each of these actions was sealed with deposits of clean sand or stones, creating a well-documented chthonic and funerary setting characteristic of Punic ritual practices in the city. The assemblage comprises 1,545 bone fragments belonging to more than 20 individual canids. Anatomical and taxonomic analysis has revealed a deliberate selection of small sized animals and of particularly vulnerable individuals, including juveniles, elderly canids and specimens with previous injuries. Many of these animals display pathological alterations and poorly healed fractures that reflect both a lack of care during life. The presence of several individuals in anatomical connection, together with their placement within clean and undisturbed layers, points to intentional and carefully planned deposition. Taphonomic evidence confirms that these animals were killed as part of the ritual. Cutmarks recorded at the base of the skull and around the foramen magnum in some individuals indicate specific slaughtering practices associated with chthonic ceremonies. Overall, the results contribute to a deeper understanding of the symbolic role of canids within Punic ritual behaviour and the shaping of sacred spaces in ancient Gadir., -University of La Rioja. SIMonE Research Group; University of Cádiz. Hum-509 Research Group -Proyecto PID2022-136275NB-100 financiado por MICIU/AEI /10.13039/501100011033 y por FEDER, UE, Póster presentado al 32nd EAA Annual Meeting in Athens 26-29 August 2026
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Contribución de congreso (ConferenceOutput)

Control of Microgrid Cluster Using Raspberry Pi

  • Carrasco González, David
  • Sarrias Mena, Raúl
  • Horrillo Quintero, Pablo
  • Llorens Iborra, Francisco
  • Fernández Ramírez, Luis Miguel
Currently, microgrid clusters (MGC) are being increasingly used owing to their benefits and human needs. MGs can be composed of power generation, consumption, and storage elements. They permit the combination of DC and AC technologies, even for a single microgrid (MG). In this paper, a new control system of a MGC consisting of two MGs connected to the main grid is developed. One of them is a DC MG that is composed of a wind turbine (WT), electrolyzer (EZ), ultracapacitor (UC), fuel cell (FC) and DC loads. The other MG is an AC MG, which is made up of a PV generator, a battery bank and AC loads. The MGC is tested under different working conditions in an experimental setup composed of a Raspberry Pi microcontroller, an OPAL-RT 4510 unit and a PC host. The experimental setup allows the system to run in real time and validate the results obtained. Finally, the control system implemented in the MGC exhibits a correct behaviour under different conditions, according to the results obtained., This work was partially supported by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, FEDER, UE (Grant PID2021-123633OBC32 supported by MCIN/AEI/10.13039/501100011033/ FEDER, UE).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Contribución de congreso (ConferenceOutput)

Control of Electrical/Thermal Multi-Energy Microgrid

  • Horrillo Quintero, Pablo
  • García Triviño, Pablo
  • Hosseini, Ehsan
  • García Vázquez, Carlos Andrés
  • Sánchez Sainz, Higinio
  • Ugalde Loo, Carlos E.
  • Peric, Vedran S.
  • Fernández Ramírez, Luis Miguel
Multi-energy microgrids (MEMGs) are becoming an effective way to reduce greenhouse gas emissions. Proper coordination among two or more energy vectors in this type of system can improve its efficiency and provide greater independence from large grids. This work presents a novel dynamic energy management system (EMS) for an MEMG that consists of heat and electricity vectors. The thermal network is composed of a gas boiler, an electric boiler and a heat load. On the other hand, a PV system, a battery bank, an electric load and a connection with the grid constitute the electrical network. In general, the EMS evaluates the PV power and electric demand and adjusts the temperature of the water in the electric boiler to avoid excessive dependency on the local grid. The MEMG and EMS were evaluated through a 4.5 hours-simulation and various conditions of sun irradiance, heat, water, and electric demand. The results show the suitability of the EMS for reducing the dependency on the local grid., This work was partially supported by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, and Unión Europea (Grant TED2021-129631B-C32 supported by MCIN/AEI/10.13039/501100011033 and NextGenerationEU/PRTR).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Contribución de congreso (ConferenceOutput)

Optimización Económica de la Gestión de Energía de Sistemas de Almacenamiento para Microrredes Multi-energía

  • Hosseini, Ehsan
  • Horrillo Quintero, Pablo
  • García Triviño, Pablo
  • García Vázquez, Carlos Andrés
  • Sánchez Sainz, Higinio
  • Fernández Ramírez, Luis Miguel
Este artículo describe el diseño y la evaluación del sistema de control de una microrred multi-energía (MRME), la cual incorpora fuentes de energía renovables (FER), almacenamiento en baterías (BAT), pila de combustible (PC), electrolizador (EZ) y diversos elementos de calefacción y refrigeración para satisfacer una demanda energética residencial. Se desarrolla un sistema óptimo de gestión de la energía (SGE), utilizando el algoritmo de optimización fmincon, para distribuir económicamente la energía entre la BAT y el hidrógeno, manteniendo el equilibrio entre la energía térmica y eléctrica en todos los componentes de la MRME. El SGE se implementa y prueba en Simulink ante distintos escenarios meteorológicos y con distintas demandas térmicas y eléctricas. Los resultados indican que el SGE propuesto controla eficazmente el flujo de energía de la BAT, la PC y el EZ, asegurando una operación de la MRME con costes mínimos, mientras se satisfacen las demandas en todas las condiciones. Además, la eficacia en el reparto de energía entre los sistemas de almacenamiento de energía (SAE) evidencian una intervención mínima de la red para cubrir la demanda térmica y eléctrica., Este trabajo ha sido parcialmente financiado por el Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, y Unión Europea “NextGenerationEU”/PRTR” (Proyecto TED2021-129631B-C32 financiado por MCIN/AEI/10.13039/501100011033 y NextGenerationEU/PRTR).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Contribución de congreso (ConferenceOutput)

Dynamic Energy Management System of a Microgrid Cluster under Operational Intermittency

  • Horrillo Quintero, Pablo
  • García Triviño, Pablo
  • Carrasco González, David
  • Sarrias Mena, Raúl
  • García Vázquez, Carlos Andrés
  • Fernández Ramírez, Luis Miguel
This paper presents a novel real-time dynamic energy management system for a microgrid cluster that includes renewable energy technologies, energy storage systems, and local demands. The energy management system operates as a tertiary controller, dynamically balancing power dispatch among microgrids by introducing the real-time available power concept. This work contributes by offering a flexible framework that coordinates both grid-forming and grid-following microgrids to optimize performance under variable renewable conditions. The proposed configuration comprises the integration of microgrids operating with grid-forming inverters and droop control method, alongside microgrids with grid-following inverter operating as an auxiliary microgrid. The proposed approach addresses the challenges of intermittency in renewable electrical technologies generation and demand variability, unlike traditional methods that assume ideal generation sources. It enables efficient, adaptive power distribution while ensuring that microgrids do not exceed their available capacities. The energy management system is validated through multiple time-domain simulations, by demonstrating its ability to maintain stability, resilience, and operational reliability in high-renewable energy technologies penetration scenarios.